What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 49 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 49 of 178

5340-12-172-2520
Flush Catch Claw

121722520
VG95136B3-35X25-TEIL 2: RNCC: 2 | RNVC: 2
602K1386-002-00.4: RNCC: 3 | RNVC: 2
VG95136B3-35X25-TEIL 2: RNCC: 3 | RNVC: 2
56101-2: RNCC: 5 | RNVC: 2
56101/2: RNCC: 5 | RNVC: 2
VG95136B3-35X25-TEIL 2: RNCC: 5 | RNVC: 9

4 Jan 1978

5340-12-145-6201
Hand Carrying Strap Assembly

121456201
23176-262454.00.0: RNCC: 2 | RNVC: 2
82300-23176-262454.00.0: RNCC: 3 | RNVC: 2
23176-262454-00-0: RNCC: 5 | RNVC: 2
23176-262454-00-0: RNCC: 5 | RNVC: 9
23176-262454.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-351-8429
Mechanical Stop

123518429
10063-545000.03: RNCC: 3 | RNVC: 2
10063-545000.03: RNCC: 5 | RNVC: 9

1 Sep 2000

5340-12-385-9523
Mounting Bracket

123859523
869144315: RNCC: 3 | RNVC: 2

25 Jul 2011

5340-12-375-9136
Cushioning Pad

123759136
4608980372: RNCC: 3 | RNVC: 2

18 Jul 2008

5340-12-316-4705
Mounting Bracket

123164705
54.0026.275.00: RNCC: 3 | RNVC: 2
54002627500: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-127-7242
Belt-Strap Keeper

121277242
1013-08.04: RNCC: 2 | RNVC: 2
1013-08.04: RNCC: 3 | RNVC: 2
1013-08-04: RNCC: 5 | RNVC: 2
200577: RNCC: 5 | RNVC: 2
1013-08-04: RNCC: 5 | RNVC: 9
1013-08.04: RNCC: 5 | RNVC: 9
200577: RNCC: 8 | RNVC: 2

30 May 1969

5340-12-312-1625
Ball Socket Seat

123121625
F11.11175-0007: RNCC: 3 | RNVC: 2

27 Nov 1987

5340-12-150-0305
Loop Clamp

121500305
5613-3005-00S: RNCC: 3 | RNVC: 2
5613-3005.00/ST: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-304-4362
Loop Clamp

123044362
537161-3219.000: RNCC: 3 | RNVC: 2
537161-3219.000: RNCC: 5 | RNVC: 9

17 Jul 1985

5340-12-130-9203

5340-12-331-4671
Expansion Shield

123314671
N5X40Z: RNCC: 3 | RNVC: 2
50351: RNCC: 5 | RNVC: 2
63611N5X40: RNCC: 5 | RNVC: 2
N5X40: RNCC: 5 | RNVC: 2
50351N5X40: RNCC: 5 | RNVC: 9

6 May 1993

5340-12-358-6538
Mounting Bracket

123586538
5411550535: RNCC: 3 | RNVC: 2

31 Oct 2002

5340-12-344-0509
Metallic Solid Wheel

123440509
2996.11.96: RNCC: 3 | RNVC: 2
2996.1196: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-091-0908

5340-12-358-7967
Mounting Bracket

123587967
983624: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-184-2349
Retaining Strap

121842349
231860407: RNCC: 3 | RNVC: 2

8 Jul 1980

5340-12-092-3839

5340-12-391-4692
Mounting Bracket

123914692
I007129TAN686A: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-320-4791
Elbow Catch

123204791
249.41.59: RNCC: 3 | RNVC: 2
2494159: RNCC: 5 | RNVC: 2

18 Jan 1990

5340-12-301-0036
Clamping Catch

123010036
PAN5119: RNCC: 3 | RNVC: 2

15 Sep 1984

5340-12-300-8417
Dust And Moisture Seal Protective Cap

123008417
3819190213: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-373-6409
Rod End Clevis

123736409
X00015422: RNCC: 3 | RNVC: 2

23 Nov 2007

5340-12-122-2381

5340-12-328-7213
Lock-Release Lever

123287213
GN503-42-M6-SW: RNCC: 3 | RNVC: 2
42XM6GN503SCHWARZ: RNCC: 5 | RNVC: 9

18 Jun 1992

5340-12-313-5562
Angle Bracket

123135562
C249-A31-C16: RNCC: 3 | RNVC: 2

15 Apr 1988

5340-12-365-5907
Double Angle Bracket

123655907
J32420115-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-366-7631
Mounting Bracket

123667631
504-122988.000: RNCC: 2 | RNVC: 2
504-122988.000: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-12-154-6166
Resilient Mount

121546166
82601801: RNCC: 3 | RNVC: 2
8202233812: RNCC: 3 | RNVC: 2
802.8202233812: RNCC: 5 | RNVC: 2
8202233812: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-392-3552
Cushioning Pad

123923552
7000139: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-358-8907
Angle Bracket

123588907
3815282040: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-349-2552
Angle Bracket

123492552
A1Z10275573: RNCC: 2 | RNVC: 2
A1Z10275573: RNCC: 3 | RNVC: 2
20352489: RNCC: 5 | RNVC: 2

18 Oct 1999

5340-12-321-0667
Dust And Moisture Seal Protective Cap

123210667
PAN3863T06: RNCC: 3 | RNVC: 2

22 Mar 1990

5340-12-346-1422
Rod End Connector

123461422
059 463: RNCC: 3 | RNVC: 2
059463: RNCC: 5 | RNVC: 2

18 Jun 1998

5340-12-092-2652

5340-12-310-3305
Nonmetallic Bumper

123103305
3140600136: RNCC: 3 | RNVC: 2

11 May 1987

5340-12-026-8551

5340-12-026-6936

5340-12-180-2157
Angle Bracket

121802157
02536955: RNCC: 3 | RNVC: 2
2536955EE5006-75: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-040-0322

5340-12-310-9749
Double Angle Bracket

123109749
03386300: RNCC: 3 | RNVC: 2

14 Jul 1987

5340-12-341-1020
Runner

123411020
035057: RNCC: 3 | RNVC: 2

26 Jul 1996

5340-12-178-6752
Retaining Strap

121786752
VG95933AR-22-AL-BK: RNCC: 2 | RNVC: 2
1/1D22MMN325AL: RNCC: 3 | RNVC: 2
1-1D22MMN325AL: RNCC: 5 | RNVC: 2

9 May 1979

5340-12-194-5336
Compression Cup

121945336
T140-10 140X120X16/3-88NBR/156: RNCC: 3 | RNVC: 2
T140-10-88NBR/156: RNCC: 5 | RNVC: 2
T140-10-88NBR156: RNCC: 5 | RNVC: 2

12 Nov 1982

5340-12-309-9192
Dust And Moisture Seal Protective Cap

123099192
1361016-17018.01: RNCC: 3 | RNVC: 2
1361016-17018-01: RNCC: 5 | RNVC: 2

18 Mar 1987

5340-12-176-0219
Access Cover

121760219
005409409: RNCC: 3 | RNVC: 2
V4-4606-75ACM370: RNCC: 5 | RNVC: 2
V4-4606-75ACM/370: RNCC: 5 | RNVC: 2

6 Nov 1978

5340-12-338-1271
Mounting Bracket

123381271
70903-400: RNCC: 3 | RNVC: 2

26 May 1995

5340-12-179-8721
Griffstueck

5340-12-312-5883
Turnbuckle

123125883
2300279-4313.00: RNCC: 2 | RNVC: 2
2300279-4313.00: RNCC: 3 | RNVC: 2
9872109: RNCC: 5 | RNVC: 9
2300279-4313.00: RNCC: 5 | RNVC: 9

20 Jan 1988

5340-12-366-2954
Mounting Plate

123662954
104149: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-307-9946
Angle Bracket

123079946
51.2474.110.02: RNCC: 3 | RNVC: 2

18 Aug 1986

5340-12-305-5716
Angle Bracket

123055716
99308125L: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-362-2848
Loop Clamp

123622848
LN9490BM55: RNCC: 2 | RNVC: 2

3 Feb 2004

5340-12-161-4109
Retaining Strap

121614109
3200007: RNCC: 3 | RNVC: 2
32040: RNCC: 5 | RNVC: 2
3200007STVERZINKI: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-321-0159
Manual Control Handle

123210159
DIN99-M10: RNCC: 2 | RNVC: 2

16 Mar 1990

5340-12-321-0515
Access Cover

123210515
7103501: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-12-370-4467
Dust And Moisture Seal Protective Plug

123704467
949721: RNCC: 3 | RNVC: 2

8 Nov 2006

5340-12-385-6291
Mounting Bracket

123856291
X00035700: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-12-022-8531

5340-12-346-1696
Mounting Bracket

123461696
4110612239: RNCC: 3 | RNVC: 2

22 Jun 1998

5340-12-381-8085
Mechanical Stop

123818085
12155324: RNCC: 3 | RNVC: 2

6 Apr 2010

5340-12-390-2751
Barrel Bolt

123902751
802 36 345: RNCC: 3 | RNVC: 2

24 Oct 2012

5340-12-351-2186
Mending Plate

123512186
T671M6007206: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-183-7225
Loop Clamp

121837225
LN9491A14: RNCC: 2 | RNVC: 2

15 May 1980

5340-12-360-0022
Mounting Bracket

123600022
9414298540: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-358-8912
Mounting Bracket

123588912
3855550040: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-317-2907
Mounting Plate

123172907
136-040.00-026: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-366-9737
Angle Bracket

123669737
2300422-151344.002: RNCC: 2 | RNVC: 2
2300422-151344.002: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-379-1265
Dust And Moisture Seal Protective Cap

123791265
MH-944: RNCC: 3 | RNVC: 2

25 Jun 2009

5340-12-318-3056
Door Holder

123183056
2016.0613: RNCC: 3 | RNVC: 2
70.214: RNCC: 5 | RNVC: 2

28 Jun 1989

5340-12-308-7623
Mending Plate

123087623
1281-14500.04: RNCC: 2 | RNVC: 2
159314: RNCC: 3 | RNVC: 2
1281-14500.04: RNCC: 5 | RNVC: 2

14 Nov 1986

5340-12-391-4784
Loop Clamp

123914784
I000302: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-090-7138

5340-12-360-2750
Angle Bracket

123602750
000611-229000.00: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-12-312-3804
Mounting Bracket

123123804
1218252: RNCC: 3 | RNVC: 2

22 Dec 1987

5340-12-358-8240
Swivel Caster

123588240
LPA-POA 75G: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-360-0033
Mounting Bracket

123600033
9414308758: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-380-3667
Mechanic Equipment Hardware Kit

123803667
TA3014G002: RNCC: 3 | RNVC: 2
1730-00446: RNCC: 6 | RNVC: 9

23 Oct 2009

5340-12-354-3888
Double Angle Bracket

123543888
J53230660-007: RNCC: 3 | RNVC: 2

6 Jul 2001

5340-12-302-6048
Angle Bracket

123026048
556-404205.000: RNCC: 3 | RNVC: 2
556-404205-000: RNCC: 5 | RNVC: 2

17 Jan 1985

5340-12-176-2487
Nonmetallic Bumper

121762487
23302-182110.19: RNCC: 2 | RNVC: 2
2608-311: RNCC: 3 | RNVC: 2
2608311: RNCC: 5 | RNVC: 2
23302-182110-19: RNCC: 5 | RNVC: 9
23302-182110.19: RNCC: 5 | RNVC: 9

23 Nov 1978

5340-12-386-2843
Mechanical Stop

123862843
009-221.425-005: RNCC: 3 | RNVC: 2

22 Aug 2011

5340-12-363-4693
Angle Bracket

123634693
J28630087-001: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-12-156-5473
Halter

121565473
42161-22100: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-377-8313
Mounting Bracket

123778313
4100036-184202.000: RNCC: 2 | RNVC: 2
4100036-184202.000: RNCC: 3 | RNVC: 2

13 Feb 2009

5340-12-321-9963
Retaining Strap

123219963
0213 4631: RNCC: 3 | RNVC: 2
89233103: RNCC: 5 | RNVC: 2
2134631ED0150-16: RNCC: 5 | RNVC: 9

16 Jul 1990

5340-12-319-0813
Flush Catch Claw

123190813
40 0038 583: RNCC: 2 | RNVC: 2
40 0038 583: RNCC: 3 | RNVC: 2
40 0038 583: RNCC: 5 | RNVC: 9

5 Sep 1989

5340-12-043-0185

5340-12-314-7192
Resilient Mount

123147192
443121273E: RNCC: 3 | RNVC: 2
443 121 273: RNCC: 5 | RNVC: 2
443 121 273: RNCC: 5 | RNVC: 2
443121273E: RNCC: 5 | RNVC: 2
443 121 273: RNCC: 5 | RNVC: 2

3 Aug 1988

5340-12-350-2022
Manual Control Lever

123502022
203422: RNCC: 3 | RNVC: 2
203422: RNCC: 5 | RNVC: 2

28 Feb 2000

5340-12-375-1564
Mending Plate

123751564
L851M2820205: RNCC: 3 | RNVC: 2

28 Apr 2008

5340-12-094-1704

5340-12-337-1080
Butt Hinge

123371080
1000006-500.00: RNCC: 2 | RNVC: 2

19 Jan 1995

5340-12-371-6563
Angle Bracket

123716563
4569710: RNCC: 3 | RNVC: 2
4569710: RNCC: 5 | RNVC: 2

3 May 2007

5340-12-312-4858
Helical Compression Spring Seat

123124858
2420520004: RNCC: 3 | RNVC: 2
0130 9083: RNCC: 5 | RNVC: 2
91658889: RNCC: 5 | RNVC: 2
2420520004: RNCC: 5 | RNVC: 9

12 Jan 1988

5340-12-321-6122
Mounting Bracket

123216122
1705701: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-314-1477
Angle Bracket

123141477
027004902: RNCC: 3 | RNVC: 2

11 Jun 1988

5340-12-350-3517
Headless Straight Rod

123503517
105-62542.11: RNCC: 3 | RNVC: 2

20 Mar 2000

5340-12-315-3021
Double Angle Bracket

123153021
4232050640: RNCC: 3 | RNVC: 2
423 205 06 40: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-351-4017
Nonmetallic Bumper

123514017
10063-231000.01: RNCC: 3 | RNVC: 2
10063-231000.01: RNCC: 5 | RNVC: 9

24 Jul 2000

5340-12-309-0789
Angle Bracket

123090789
2702064502: RNCC: 3 | RNVC: 2
27020 64502: RNCC: 5 | RNVC: 9

11 Dec 1986

5340-12-385-7609
Access Cover

123857609
5500130833: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-12-178-2135
Compression Cup

121782135
44-21191: RNCC: 3 | RNVC: 2

26 Mar 1979

5340-12-194-0637
Webbing Strap

121940637
620130-05: RNCC: 3 | RNVC: 2

28 Sep 1982

5340-12-371-2975
Mounting Bracket

123712975
8350-0259: RNCC: 2 | RNVC: 2
8350-0259: RNCC: 3 | RNVC: 2

12 Mar 2007

5340-12-338-7489
Mounting Bracket

123387489
66 79 16:130.10: RNCC: 3 | RNVC: 2

22 Aug 1995

5340-12-338-8480
Dust And Moisture Seal Protective Cap

123388480
463-611000.004: RNCC: 3 | RNVC: 2
9895635: RNCC: 3 | RNVC: 9
463-611000.004: RNCC: 5 | RNVC: 9

31 Aug 1995

5340-12-164-8053
Spring Tension Clip

121648053
8400826: RNCC: 3 | RNVC: 2
0002-057: RNCC: 5 | RNVC: 2
0002057: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-143-4163
Rod End Clevis

121434163
TWH01-026: RNCC: 3 | RNVC: 2
TWH01-026: RNCC: 5 | RNVC: 2
TWH01-026: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-356-8868
Mounting Bracket

123568868
6017959: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-12-195-1740
Lock-Release Lever

121951740
2500125-211113.00: RNCC: 2 | RNVC: 2
2500125-211113.00: RNCC: 3 | RNVC: 2
2500125-211113.00: RNCC: 3 | RNVC: 2
2500125-211113-00: RNCC: 5 | RNVC: 2
2500125-211113-00: RNCC: 5 | RNVC: 9
2500125-211113.00: RNCC: 5 | RNVC: 9

20 Jan 1983

5340-12-377-9178
Loop Clamp

123779178
RSGU1.2X12/20-W3: RNCC: 3 | RNVC: 2
41222290 TEIL 41231321: RNCC: 5 | RNVC: 2
41231321: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-12-315-0610
Resilient Mount

123150610
DIN95363-A30X15-NBR65ST-M8X11: RNCC: 2 | RNVC: 2
0214 8942: RNCC: 5 | RNVC: 2
2148942EE0148-40: RNCC: 5 | RNVC: 2
4790510: RNCC: 5 | RNVC: 2
81100-30X15-M8X11.NBR65.ST: RNCC: 5 | RNVC: 2
VG95363-A30X15-NBR65ST-M8X11: RNCC: 5 | RNVC: 9

10 Sep 1988

5340-12-144-6284
Mending Plate

121446284
DIN15058-20X5: RNCC: 2 | RNVC: 2
20X5DIN15058: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-171-4335
Butt Hinge

121714335
39-1045: RNCC: 2 | RNVC: 2
39-1045: RNCC: 3 | RNVC: 2

13 Oct 1977

5340-12-198-1179
Escutcheon Plate

121981179
171837235: RNCC: 3 | RNVC: 9

21 Dec 1983

5340-12-185-4418
Mending Plate

121854418
CF407256: RNCC: 3 | RNVC: 2
CF 407 256: RNCC: 5 | RNVC: 2
CF407256: RNCC: 5 | RNVC: 2
CF407256: RNCC: 5 | RNVC: 2
CF 407 256: RNCC: 5 | RNVC: 2

7 Oct 1980

5340-12-365-7081
Mounting Bracket

123657081
9436950314: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-358-5380
Mounting Bracket

123585380
200 607 002: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-380-4839
Mounting Bracket

123804839
105-86597.11: RNCC: 3 | RNVC: 2

3 Nov 2009

5340-12-162-1831
An Scharnierlappen

5340-12-190-7214
Stock- Riegel

5340-12-135-6743

5340-12-197-8048
Helical Compression Spring Seat

121978048
03004010: RNCC: 3 | RNVC: 2
03004010.164: RNCC: 5 | RNVC: 2

23 Nov 1983

5340-12-332-7862
Friction Catch

123327862
DLH 067: RNCC: 3 | RNVC: 2
DL67: RNCC: 5 | RNVC: 9

20 Sep 1993

5340-12-191-6418
Loop Clamp

121916418
PAN4231DDEE6622: RNCC: 3 | RNVC: 2

17 Feb 1982

5340-12-178-8455
Mending Plate

121788455
0323234010: RNCC: 3 | RNVC: 2

18 May 1979

5340-12-090-6985

5340-12-317-2934
Strap Fastener Loop

123172934
20300052: RNCC: 2 | RNVC: 2
20300052: RNCC: 3 | RNVC: 2
M20300052: RNCC: 5 | RNVC: 2
M20300052: RNCC: 5 | RNVC: 2

28 Mar 1989

5340-12-349-5016
Butt Hinge

123495016
T524M1521201: RNCC: 3 | RNVC: 2

23 Nov 1999

5340-12-304-7881
Mending Plate

123047881
571282477: RNCC: 3 | RNVC: 2
4798929: RNCC: 5 | RNVC: 2
0241 5862: RNCC: 5 | RNVC: 9
02415862EE0147-39: RNCC: 5 | RNVC: 9

26 Aug 1985

5340-12-390-1695
Loop Clamp

123901695
064075: RNCC: 3 | RNVC: 2

11 Oct 2012

5340-12-372-1944
Loop Clamp

123721944
450 7235-807: RNCC: 3 | RNVC: 2
450 7235-807: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-12-351-4234
Dust And Moisture Seal Boot

123514234
01700711400: RNCC: 3 | RNVC: 2

25 Jul 2000

5340-12-136-5773
Webbing Strap

121365773
14002-255: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-344-3626
Dust And Moisture Seal Boot

123443626
0009875745: RNCC: 3 | RNVC: 2
678720/20: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-174-2604
Webbing Strap

121742604
1000025-531520: RNCC: 2 | RNVC: 2
7880220: RNCC: 3 | RNVC: 2
7880-220: RNCC: 5 | RNVC: 2
1000025-531520: RNCC: 5 | RNVC: 9
000-A3-25X2,0X370-BW-RAL6031: RNCC: 6 | RNVC: 9

19 Jun 1978

5340-12-177-5112
Manual Control Handle

121775112
2300002-181430.000: RNCC: 2 | RNVC: 2
2300002-181430.000: RNCC: 3 | RNVC: 2
2300002-181430: RNCC: 5 | RNVC: 9
2300002-181430: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-300-6619
Access Door

123006619
1000091-1000.02: RNCC: 2 | RNVC: 2
1000091-1000.02: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-319-3837
Double Angle Bracket

123193837
C249-A13-C6: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-308-0691
Detent Plunger

123080691
2601-85.02: RNCC: 3 | RNVC: 2

28 Aug 1986

5340-12-371-9716
Angle Bracket

123719716
S282M4016102: RNCC: 2 | RNVC: 2
S282M4016102: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-12-308-3821
Mending Plate

123083821
3644901: RNCC: 3 | RNVC: 2
36449 01: RNCC: 5 | RNVC: 2

3 Oct 1986

5340-12-303-9971
Metal Runner

123039971
1027336: RNCC: 3 | RNVC: 2
10070918: RNCC: 5 | RNVC: 2

29 May 1985

5340-12-319-6668
Mounting Bracket

123196668
5381301: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-12-197-0930
Nonmetallic Bumper

121970930
4358687097: RNCC: 3 | RNVC: 2

19 Sep 1983

5340-12-353-1721
Angle Bracket

123531721
160-20724: RNCC: 3 | RNVC: 2

6 Feb 2001

5340-12-327-3753
Runner

123273753
81671650039: RNCC: 2 | RNVC: 2
81671650039: RNCC: 3 | RNVC: 2

16 Jan 1992

5340-12-322-2043
Extension Drawer Slide

123222043
5L.3712.001.96: RNCC: 3 | RNVC: 2
5L.3712.001.96: RNCC: 5 | RNVC: 2

1 Aug 1990

5340-12-183-0309
Flush Catch Claw

121830309
81614460008: RNCC: 3 | RNVC: 2

13 Mar 1980

5340-12-357-8891
Mechanical Stop

123578891
11794201: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-12-390-0569
Expansion Shield

123900569
11H-SD: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-378-4185
Mechanical Stop

123784185
0000654838: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-368-9526
Halter

123689526
0709551: RNCC: 3 | RNVC: 2

9 May 2006

5340-12-093-6688

5340-12-373-4176
Mounting Bracket

123734176
40.902: RNCC: 3 | RNVC: 2

30 Oct 2007

5340-12-361-0801
Mounting Bracket

123610801
0853 9350.084: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-12-316-1527
Loop Clamp

123161527
3814922041: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-314-2438
Mounting Bracket

123142438
272.317 738: RNCC: 2 | RNVC: 2
272.317 738: RNCC: 3 | RNVC: 2

21 Jun 1988

5340-12-174-9863
Dust And Moisture Seal Protective Cap-Plug

121749863
900A20: RNCC: 3 | RNVC: 2
GPN900,A20: RNCC: 5 | RNVC: 2
01167324: RNCC: 5 | RNVC: 2
GPN900A20: RNCC: 5 | RNVC: 2
900002000: RNCC: 5 | RNVC: 2
03314: RNCC: 5 | RNVC: 2
A20: RNCC: 5 | RNVC: 2
A20GPN900: RNCC: 5 | RNVC: 2
03314: RNCC: 5 | RNVC: 9

15 Aug 1978

5340-12-317-3004
Dust And Moisture Seal Protective Plug

123173004
3609970020: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-300-2506
Coat And Hat Hook

123002506
01236579: RNCC: 3 | RNVC: 2

18 Jul 1984

5340-12-328-9397
Escutcheon Plate

123289397
105-21901.86: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-363-6764
Catch Strike

123636764
4607430429: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-12-321-7399
Rim Lock

123217399
6188PAB-GCR-HCR-NPI: RNCC: 3 | RNVC: 2
020 326: RNCC: 5 | RNVC: 2

21 Jun 1990

5340-12-355-4013
Multiple Angle Bracket

123554013
4615441638: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-322-8104
Sealing Plug Assembly

123228104
8470 040 153: RNCC: 3 | RNVC: 2
8470040153: RNCC: 5 | RNVC: 2
8470040153: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-362-7352
Angle Bracket

123627352
S537M3017101: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-12-020-7558

5340-12-356-5812
Nonmetallic Bumper

123565812
028013126: RNCC: 3 | RNVC: 2
028013126: RNCC: 5 | RNVC: 9

13 Mar 2002

5340-12-333-7650
Mending Plate

123337650
15 0004 732: RNCC: 2 | RNVC: 2
15 0004 732: RNCC: 3 | RNVC: 2
150004732: RNCC: 5 | RNVC: 2

3 Feb 1994

5340-12-384-2264
Dust And Moisture Seal Protective Cover

123842264
10025123: RNCC: 3 | RNVC: 2
10025123: RNCC: 5 | RNVC: 2

3 Feb 2011

5340-12-358-3534
Double Angle Bracket

123583534
85062450011: RNCC: 3 | RNVC: 2
85.06245.0011: RNCC: 5 | RNVC: 2

14 Oct 2002

5340-12-305-7112
Mending Plate

123057112
54.2729.205.05: RNCC: 3 | RNVC: 2

6 Dec 1985

5340-12-388-0754
Mounting Bracket

123880754
866404311: RNCC: 2 | RNVC: 2
866404311: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-12-360-4794
Manual Control Lever

123604794
82050507: RNCC: 3 | RNVC: 2
82050507: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-391-2524
Mounting Bracket

123912524
10080056: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-12-319-7515
Electrical-Mechanical Equipment Post

123197515
6516913: RNCC: 3 | RNVC: 2
6516913: RNCC: 5 | RNVC: 2

31 Oct 1989

5340-12-317-8317
Shimmy Damper

123178317
083399: RNCC: 3 | RNVC: 2

18 May 1989

5340-12-385-1344
Access Cover

123851344
I010795: RNCC: 3 | RNVC: 2

4 May 2011

5340-12-329-2629
Ball Socket Seat

123292629
0009918922: RNCC: 3 | RNVC: 2
0009918922: RNCC: 5 | RNVC: 2

29 Jul 1992

5340-12-351-2341
Verriegelun Buegel

123512341
01822: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-351-2248
Angle Bracket

123512248
2500113-5610: RNCC: 2 | RNVC: 2
2500113-5610: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-040-0134

5340-12-350-3382
Mounting Bracket

123503382
0224 9292: RNCC: 3 | RNVC: 2
2815-65-0000391: RNCC: 5 | RNVC: 9

16 Mar 2000

5340-12-195-2620
Rod End Clevis

121952620
8345058-04: RNCC: 3 | RNVC: 2

31 Jan 1983

5340-12-361-6340
Access Hole Frame

123616340
MLG-00-243100: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-12-383-9663
Bail Handle

123839663
S80027-00: RNCC: 3 | RNVC: 2

30 Dec 2010

5340-12-166-3959
Compression Cup

121663959
6442-1DPT9: RNCC: 3 | RNVC: 2
6442-1DPT9: RNCC: 5 | RNVC: 9
6442-1DPT9: RNCC: 5 | RNVC: 9

3 Sep 1976

5340-12-333-7574
Friction Catch Stud

123337574
15 0004 708: RNCC: 2 | RNVC: 2
15 0004 708: RNCC: 3 | RNVC: 2
150004708: RNCC: 5 | RNVC: 2

2 Feb 1994

5340-12-331-6037
Turnbuckle Body

123316037
1846201: RNCC: 3 | RNVC: 2
GZ18462: RNCC: 5 | RNVC: 9

27 May 1993

5340-12-382-7592
Loop Holder

123827592
T51758: RNCC: 3 | RNVC: 2

5 Aug 2010

5340-12-313-5656
Lock-Release Lever

123135656
AZ6012G65: RNCC: 3 | RNVC: 9
AZ6012G065: RNCC: 5 | RNVC: 2
AZ6012G065: RNCC: 5 | RNVC: 9

15 Apr 1988

5340-12-309-7947
Mending Plate

123097947
1000104-212400.24: RNCC: 2 | RNVC: 2
1000104-212400.24: RNCC: 3 | RNVC: 2
1000104-212400.24: RNCC: 5 | RNVC: 9

3 Mar 1987

5340-12-177-9958
Angle Bracket

121779958
81974860191: RNCC: 3 | RNVC: 2

13 Mar 1979

5340-12-360-3518
Spring Tension Clip

123603518
0009502219: RNCC: 3 | RNVC: 2
0009502219: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-326-6002
Dust And Moisture Seal Protective Plug

123266002
620U15B: RNCC: 3 | RNVC: 2
GPN620,U15B: RNCC: 5 | RNVC: 9

11 Oct 1991

5340-12-028-7060

5340-12-375-3685
Butt Hinge

123753685
631 227: RNCC: 3 | RNVC: 2

26 May 2008

5340-12-319-8877
Retaining Strap

123198877
4900288-350100.01: RNCC: 2 | RNVC: 2
4312 712 41860: RNCC: 3 | RNVC: 2

14 Nov 1989

5340-12-181-1898
Antipilferage Seal

121811898
54203053-05: RNCC: 3 | RNVC: 2
54203053-05: RNCC: 5 | RNVC: 9

31 Oct 1979

5340-12-190-7184
Angle Bracket

121907184
NO PRIMARY REF 12-190-7184: RNCC: 3 | RNVC: 2
7508 135938: RNCC: 5 | RNVC: 9
7508135938: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-329-6443
Butt Hinge Leaf

123296443
R04836-107: RNCC: 2 | RNVC: 2
R04836-107: RNCC: 3 | RNVC: 2

12 Sep 1992

5340-12-702-2469
Mounting Bracket

127022469
VG95211-ML-127022469: RNCC: 2 | RNVC: 2
30.7803.29: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-372-0045
Access Cover

123720045
2619377: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-12-333-0693
Dust And Moisture Seal Protective Plug

123330693
1017105: RNCC: 3 | RNVC: 2
00009732740: RNCC: 5 | RNVC: 9
0973274: RNCC: 5 | RNVC: 9

26 Oct 1993

5340-12-360-2743
Mounting Bracket

123602743
3875221540: RNCC: 3 | RNVC: 2
387.522.15.40: RNCC: 5 | RNVC: 9

30 Apr 2003

5340-12-374-3475
Retaining Strap

123743475
5324440: RNCC: 3 | RNVC: 2

11 Feb 2008

5340-12-319-0330
Butt Hinge Leaf

123190330
2002.10.11.000: RNCC: 3 | RNVC: 9

31 Aug 1989

5340-12-176-2402
Detent Plunger

121762402
CF418018BU: RNCC: 3 | RNVC: 2
536056-8217.000: RNCC: 3 | RNVC: 2
CF418018BU: RNCC: 5 | RNVC: 2
CF 418 018 BU: RNCC: 5 | RNVC: 2
CF 418 018 BU: RNCC: 5 | RNVC: 2
CF418018BU: RNCC: 5 | RNVC: 2
CF 418 018 BU: RNCC: 5 | RNVC: 2
536056-8217.000: RNCC: 5 | RNVC: 9

15 Nov 1978

5340-12-330-0440
Dust And Moisture Seal Protective Cap

123300440
05.3308.000: RNCC: 3 | RNVC: 2
M81H5SW13: RNCC: 5 | RNVC: 2
8442364: RNCC: 5 | RNVC: 2
0056123: RNCC: 5 | RNVC: 2

27 Oct 1992

5340-12-321-6244
Shimmy Damper

123216244
5590903025: RNCC: 3 | RNVC: 2
5590902025: RNCC: 5 | RNVC: 2

8 Jun 1990

5340-12-190-4822
Electrical-Mechanical Equipment Post

121904822
CF 455 836: RNCC: 3 | RNVC: 2
CF455836: RNCC: 5 | RNVC: 2
CF 455 836: RNCC: 5 | RNVC: 2
CF455836: RNCC: 5 | RNVC: 2

1 Dec 1981

5340-12-373-6336
Access Cover

123736336
8801841108: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-12-394-1186
Access Cover

123941186
062731: RNCC: 3 | RNVC: 2

6 Nov 2013

5340-12-027-0043

5340-12-338-8037
Angle Bracket

123388037
6700017-204900.02: RNCC: 2 | RNVC: 2
6700017-204900.02: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-306-8944
Butt Hinge Leaf

123068944
2500212-30: RNCC: 2 | RNVC: 2
2500212-30: RNCC: 3 | RNVC: 2
139000038: RNCC: 5 | RNVC: 2
2500217: RNCC: 5 | RNVC: 9

15 Apr 1986

5340-12-369-9753
Mounting Plate

123699753
4615250010: RNCC: 3 | RNVC: 2

31 Aug 2006

5340-12-373-7158
Loop Clamp

123737158
06154081150: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-12-360-2135
Shimmy Damper

123602135
9425040214: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-358-8735
Mounting Plate

123588735
028015571: RNCC: 3 | RNVC: 2
028015571: RNCC: 5 | RNVC: 9

25 Nov 2002

5340-12-359-8485
Dust And Moisture Seal Protective Cap-Plug

123598485
610U5RAL3000: RNCC: 3 | RNVC: 2
610U5ROT: RNCC: 5 | RNVC: 9
GPN610-U5RAL3000: RNCC: 5 | RNVC: 9

13 Mar 2003

5340-12-163-9479
Nonmetallic Bumper

121639479
330822098: RNCC: 3 | RNVC: 2
330822098: RNCC: 3 | RNVC: 2
22098: RNCC: 5 | RNVC: 2
330822098: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-182-7379
Halter

121827379
2925201: RNCC: 3 | RNVC: 2

22 Feb 1980

5340-12-372-2057
Rod End Clevis

123722057
4425520126: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-12-384-6912
Runner

123846912
S005824: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-12-346-7785
Mounting Plate

123467785
2396-292300A05B: RNCC: 3 | RNVC: 2

10 Sep 1998

5340-12-352-8773
Spacing Threaded Standoff

123528773
8372370571: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-12-175-3208
Mending Plate

121753208
4684007104: RNCC: 3 | RNVC: 2
1270777EY8751-28: RNCC: 5 | RNVC: 2
01270777: RNCC: 5 | RNVC: 2

11 Sep 1978

5340-12-379-3917
Access Cover

123793917
520367: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-394-3366
Friction Catch

123943366
64.10.301.50: RNCC: 3 | RNVC: 2
83131114: RNCC: 5 | RNVC: 2

21 Nov 2013

5340-12-352-2848
Helical Compression Spring Retainer

123522848
5201692: RNCC: 3 | RNVC: 2

6 Nov 2000

5340-12-373-6293
Angle Bracket

123736293
X00024109: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-12-365-5279
Catch Strike

123655279
6030090: RNCC: 3 | RNVC: 2

12 Jan 2005

5340-12-357-8161
Mounting Bracket

123578161
2300388-250300.001: RNCC: 2 | RNVC: 2
9941515: RNCC: 3 | RNVC: 2
2300388-250300.001: RNCC: 5 | RNVC: 2

29 Jul 2002

5340-12-313-1472
Support Hook

123131472
54.0027.578.12: RNCC: 3 | RNVC: 2

8 Mar 1988

5340-12-311-5536
Retaining Strap

123115536
700346090300: RNCC: 3 | RNVC: 2
BG90MMN346: RNCC: 5 | RNVC: 2

17 Sep 1987

5340-12-350-7330
Dust And Moisture Seal Protective Cover

123507330
13229601: RNCC: 3 | RNVC: 2

12 May 2000

5340-12-090-7137

5340-12-394-2971
Mechanical Stop

123942971
ZG8504G010: RNCC: 3 | RNVC: 2
14100088121: RNCC: 5 | RNVC: 2

19 Nov 2013

5340-12-393-3465
Dust And Moisture Seal Boot

123933465
3324154: RNCC: 3 | RNVC: 2
03324154: RNCC: 5 | RNVC: 2

10 Sep 2013

5340-12-362-2398
Suction Cup

123622398
42.016.072: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-12-315-5090
Mounting Bracket

123155090
2500-311000.15: RNCC: 3 | RNVC: 2

29 Oct 1988

5340-12-329-9530
Retaining Strap

123299530
1249465: RNCC: 3 | RNVC: 9
91640437: RNCC: 5 | RNVC: 2

15 Oct 1992

5340-12-328-2914
Mounting Bracket

123282914
113027: RNCC: 3 | RNVC: 2

5 May 1992

5340-12-350-2877
Dust And Moisture Seal Protective Cover

123502877
837 073 44: RNCC: 3 | RNVC: 2

13 Mar 2000

5340-12-325-8871
Webbing Strap

123258871
79017/026-0780-0260: RNCC: 3 | RNVC: 2
79017/026-0780-0260: RNCC: 5 | RNVC: 9

18 Jul 1991

5340-12-183-1805
Dust And Moisture Seal Protective Cap

121831805
PAN3860-04: RNCC: 3 | RNVC: 2

25 Mar 1980

5340-12-324-9480
Mending Plate

123249480
C22107-A302-C45: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-12-328-9272
Loop Clamp

123289272
2300354-889900-005: RNCC: 2 | RNVC: 2
70700-400056-99: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-328-9270
Loop Clamp

123289270
2300354-889900-001: RNCC: 2 | RNVC: 2
70700-400016-99: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-183-2790
Platte

121832790
844-30-010700004-0A: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-12-330-1427
Spring Tension Clip

123301427
NO PRIMARY REF 12-330-1427: RNCC: 3 | RNVC: 2
81.50607-0002: RNCC: 5 | RNVC: 2
81506070002: RNCC: 5 | RNVC: 2
68191450: RNCC: 5 | RNVC: 9
68191450: RNCC: 5 | RNVC: 9

7 Nov 1992

5340-12-376-0272
Nut And Bolt Head Protective Cap

123760272
45832.10: RNCC: 3 | RNVC: 2

4 Aug 2008

5340-12-357-5413
Mounting Bracket

123575413
5581278: RNCC: 2 | RNVC: 2
5581278: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-348-1790
Ladder Safety Shoe

123481790
209893: RNCC: 3 | RNVC: 2
0008540062: RNCC: 5 | RNVC: 2

29 Apr 1999

5340-12-358-0907
Mending Plate

123580907
1948070K14: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-12-194-3714
Nonmetallic Bumper

121943714
281843314: RNCC: 3 | RNVC: 2

27 Oct 1982

5340-12-323-8737
Retaining Strap

123238737
55503S0003: RNCC: 3 | RNVC: 2

3 Jan 1991

5340-12-303-5787
Mending Plate

123035787
52.0261.700.01: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-331-5150
Access Door

123315150
4012.151.49831: RNCC: 3 | RNVC: 2
4012 151 49831: RNCC: 5 | RNVC: 2

12 May 1993

5340-12-385-4640
Mounting Bracket

123854640
X00037544: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-12-316-2038
Casement Fastener

123162038
3817250179: RNCC: 3 | RNVC: 2

30 Dec 1988

5340-12-331-0311
Mounting Plate

123310311
55.2509.000.12: RNCC: 3 | RNVC: 2

15 Mar 1993

5340-12-345-4816
Helical Compression Spring Seat

123454816
4723433860: RNCC: 3 | RNVC: 2
472.343.38.60: RNCC: 5 | RNVC: 2

24 Mar 1998

5340-12-329-7491
Multiple Angle Bracket

123297491
FALREG1165: RNCC: 3 | RNVC: 2

23 Sep 1992

5340-12-376-7780
Spring Tension Clip

123767780
0015331840: RNCC: 3 | RNVC: 2

6 Nov 2008

5340-12-319-9285
Access Cover

123199285
54.0026.875.00: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-12-319-3612
Mending Plate

123193612
6392593: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-12-381-8386
Spacing Threaded Standoff

123818386
000605-221140.01: RNCC: 2 | RNVC: 2
000605-221140.01: RNCC: 3 | RNVC: 2
43609: RNCC: 5 | RNVC: 2

8 Apr 2010

5340-12-316-3996
Nonmetallic Bumper

123163996
5186826: RNCC: 3 | RNVC: 2

16 Jan 1989

5340-12-198-1913
Helical Compression Spring Retainer

121981913
1420328012: RNCC: 3 | RNVC: 2
0130 7600: RNCC: 5 | RNVC: 2
1420328012: RNCC: 5 | RNVC: 2
VDPM00704: RNCC: 5 | RNVC: 2

28 Dec 1983

5340-12-197-5025
Dust And Moisture Seal Protective Cap

121975025
158398: RNCC: 3 | RNVC: 2
158398: RNCC: 5 | RNVC: 9

27 Oct 1983

5340-12-315-9072
Mounting Bracket

123159072
54.0026.138.00: RNCC: 3 | RNVC: 2
54002613800: RNCC: 5 | RNVC: 2

7 Dec 1988

5340-12-310-0782
Catch Strike

123100782
33805: RNCC: 3 | RNVC: 2

3 Apr 1987

5340-12-159-5061
Dust And Moisture Seal Protective Cap-Plug

121595061
610U23: RNCC: 3 | RNVC: 2
GPN610U23: RNCC: 5 | RNVC: 2
9560111170: RNCC: 5 | RNVC: 2
032315: RNCC: 5 | RNVC: 2
GPN610U23: RNCC: 5 | RNVC: 2
610002300: RNCC: 5 | RNVC: 9
GPN610,U23: RNCC: 5 | RNVC: 9
U23: RNCC: 5 | RNVC: 9
U23GPN610: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-368-3022
Door Button

123683022
6020329: RNCC: 3 | RNVC: 2
63350110: RNCC: 5 | RNVC: 2

13 Feb 2006

5340-12-326-6157
Plain Solid Disk

123266157
007583: RNCC: 3 | RNVC: 2
007583: RNCC: 5 | RNVC: 9

15 Oct 1991

5340-12-092-3867

5340-12-311-0558
Access Cover

123110558
43716281-601: RNCC: 2 | RNVC: 2
43716281-601: RNCC: 3 | RNVC: 2

22 Jul 1987

5340-12-335-0159
Manual Control Lever

123350159
D2002-061-035: RNCC: 3 | RNVC: 2

12 Jul 1994

5340-12-309-3069
Loop Clamp

123093069
8390700037: RNCC: 3 | RNVC: 2

13 Jan 1987

5340-12-322-7877
Furniture Glide

123227877
396-4586: RNCC: 3 | RNVC: 2

21 Sep 1990

5340-12-310-0562
Mending Plate

123100562
6222684: RNCC: 3 | RNVC: 2

2 Apr 1987

5340-12-138-6129
Nonmetallic Bumper

121386129
8390780338: RNCC: 3 | RNVC: 2
114M40006: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-161-1810
Butt Hinge

121611810
160-74908: RNCC: 3 | RNVC: 2
160-74908: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-361-4343
Retaining Strap

123614343
1504324: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-360-2978
Rod End Connector

123602978
0009001509: RNCC: 3 | RNVC: 2
0009001509: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-372-4711
Helical Compression Spring Seat

123724711
716F05008: RNCC: 3 | RNVC: 2
716F05008E1: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-12-301-8407
Plug Button

123018407
3814620061: RNCC: 3 | RNVC: 2

13 Nov 1984

5340-12-168-1550
Butt Hinge Leaf

121681550
LN9172AF330: RNCC: 2 | RNVC: 2
A15X330LN9172: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-315-5337
Nut And Bolt Locking Plate

123155337
2500-319100.20: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-12-343-2471
Loop Clamp

123432471
N10258201: RNCC: 3 | RNVC: 2

22 May 1997

5340-12-352-2273
Double Angle Bracket

123522273
5500750740: RNCC: 3 | RNVC: 2
550 075 07 40: RNCC: 5 | RNVC: 2

26 Oct 2000

5340-12-328-9392
Mending Plate

123289392
272.320 276: RNCC: 2 | RNVC: 2
272.320.276: RNCC: 3 | RNVC: 2
272.320 276: RNCC: 5 | RNVC: 9

2 Jul 1992

5340-12-305-7110
Strap Bolt

123057110
54.2729.208.00: RNCC: 3 | RNVC: 2

6 Dec 1985

5340-12-126-5199
Compression Cup

121265199
H2545: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-374-8294
Spring Tension Clip

123748294
46632313591: RNCC: 3 | RNVC: 2

28 Mar 2008

5340-12-355-9450
Double Angle Bracket

123559450
J27420213-401: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-324-4024
Dust And Moisture Seal Protective Plug

123244024
6600144-120600.03: RNCC: 2 | RNVC: 2
56498620: RNCC: 3 | RNVC: 2

13 Feb 1991

5340-12-394-2142
Safety Cable Kit

123942142
DAN80-100: RNCC: 3 | RNVC: 2

12 Nov 2013

5340-12-309-5619
Angle Bracket

123095619
5802255-391000.000: RNCC: 2 | RNVC: 2
5802255-391000.000: RNCC: 5 | RNVC: 9

4 Feb 1987

5340-12-309-4796
Retaining Strap

123094796
42031248: RNCC: 3 | RNVC: 2
42031248EE5093-29: RNCC: 5 | RNVC: 2

27 Jan 1987

5340-12-390-2740
Rod End Clevis

123902740
DIN71752-G5X10-A3D: RNCC: 2 | RNVC: 2

24 Oct 2012

5340-12-180-7212
Dust And Moisture Seal Protective Cap

121807212
2EV5-576: RNCC: 3 | RNVC: 2
3816870045: RNCC: 5 | RNVC: 2

28 Sep 1979

5340-12-372-4842
Angle Bracket

123724842
160-73103-29: RNCC: 3 | RNVC: 2
15160-73103.29: RNCC: 5 | RNVC: 2

20 Jul 2007

5340-12-330-0945
Butt Hinge Leaf

123300945
VG95211-ML-123300945: RNCC: 2 | RNVC: 2
65200-09004Y102: RNCC: 3 | RNVC: 2
65200-09004Y102: RNCC: 5 | RNVC: 2

3 Nov 1992

5340-12-330-0946
Butt Hinge Leaf

123300946
VG95211-ML-123300946: RNCC: 2 | RNVC: 2
65200-09004Y103: RNCC: 3 | RNVC: 2
65200-09004Y103: RNCC: 5 | RNVC: 2

3 Nov 1992

5340-12-385-5415
Retaining Strap

123855415
5849952968: RNCC: 3 | RNVC: 2

14 Jun 2011

5340-12-331-3093
Mounting Plate

123313093
5801424040: RNCC: 3 | RNVC: 2
580 142 40 40: RNCC: 5 | RNVC: 2

21 Apr 1993

5340-12-334-4164
Loop Clamp

123344164
RU51916: RNCC: 3 | RNVC: 2

5 May 1994

5340-12-389-9373
Lock Key

123899373
KV1017-LANG: RNCC: 3 | RNVC: 2

14 Sep 2012

5340-12-154-6790
Resilient Mount

121546790
1203045100: RNCC: 3 | RNVC: 2
LIMA,810TB,AMAGNETISCH,L34A: RNCC: 5 | RNVC: 2
L34AMAGNETISCHAUSFTB: RNCC: 5 | RNVC: 9
LIMA,INDEX810TBAMAGNETISCH: RNCC: 5 | RNVC: 9
LIMA810TBAMAGNETISCHL34: RNCC: 5 | RNVC: 9
LIMALHTB810AMAGNETISCH: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-345-2748
Mounting Bracket

123452748
54.0026.116.00: RNCC: 3 | RNVC: 2

24 Feb 1998

5340-12-181-2099
Ball Socket Seat

121812099
0009911722: RNCC: 3 | RNVC: 2
0009911722: RNCC: 5 | RNVC: 2

31 Oct 1979

5340-12-348-8929
Webbing Strap

123488929
200.0504.07.0000: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-385-3552
Mending Plate

123853552
22731: RNCC: 1 | RNVC: 2
22731: RNCC: 3 | RNVC: 2

25 May 2011

5340-12-303-9480
Rim Lock

123039480
4047600150: RNCC: 3 | RNVC: 2

23 May 1985

5340-12-303-8618
Mending Plate

123038618
4219110311: RNCC: 3 | RNVC: 2

9 May 1985

5340-12-388-6262
Loop Clamp

123886262
5000034416: RNCC: 3 | RNVC: 2
0034416: RNCC: 5 | RNVC: 2
CV123059: RNCC: 5 | RNVC: 2
0034416: RNCC: 5 | RNVC: 2

5 Apr 2012

5340-12-011-5813

5340-12-197-8197
Electrical-Mechanical Equipment Post

121978197
5269-20.02: RNCC: 2 | RNVC: 2
5269-20.02: RNCC: 5 | RNVC: 9

24 Nov 1983

5340-12-320-7052
Mounting Bracket

123207052
C249-A29-C36: RNCC: 2 | RNVC: 2
C249-A29-C36: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-172-6179
Detent Plunger

121726179
1224-219.16: RNCC: 2 | RNVC: 2
532008-0125.000: RNCC: 3 | RNVC: 2
532008-125: RNCC: 3 | RNVC: 2
532008-0125.000: RNCC: 5 | RNVC: 2
532008-125: RNCC: 5 | RNVC: 2
1224-219-16: RNCC: 5 | RNVC: 9
1224-219.16: RNCC: 5 | RNVC: 9

31 Jan 1978

5340-12-350-3838
Section Block Clamp

123503838
J29120348-001: RNCC: 3 | RNVC: 2

23 Mar 2000

5340-12-356-2603
Spring Tension Clip

123562603
2125-120050A09B: RNCC: 2 | RNVC: 2
2125-120050A09B: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-12-328-2243
Nonmetallic Bumper

123282243
350-202-017: RNCC: 3 | RNVC: 2

24 Apr 1992

5340-12-325-9055
Webbing Strap

123259055
79017/026-0700-0510: RNCC: 3 | RNVC: 2
79017/026-700-510: RNCC: 3 | RNVC: 2
79017/026-0700-0510: RNCC: 5 | RNVC: 9

22 Jul 1991

5340-12-382-4098
Flush Lock

123824098
200-9033: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-12-180-1424
Nonmetallic Bumper

121801424
403197660025: RNCC: 3 | RNVC: 2

22 Aug 1979

5340-12-135-6741

5340-12-388-4468
Mounting Plate

123884468
5842033440: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-383-8240
Strap Fastener Loop

123838240
10040226-BUND: RNCC: 3 | RNVC: 2

10 Dec 2010

5340-12-190-8763
Helical Compression Spring Seat

121908763
2410320067: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-384-5793
Webbing Strap

123845793
1228996: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-12-361-5639
Runner

123615639
230.1034: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-12-308-1522
Escutcheon Plate

123081522
5051490: RNCC: 3 | RNVC: 2

9 Sep 1986

5340-12-366-2184
Helical Compression Spring Seat

123662184
2410120013: RNCC: 3 | RNVC: 2

22 Mar 2005

5340-12-198-8861
Retaining Strap

121988861
8372002540: RNCC: 3 | RNVC: 2

9 Mar 1984

5340-12-310-2839
Retaining Clip

123102839
C22136-A1000-C131: RNCC: 3 | RNVC: 2

5 May 1987

5340-12-388-7671
Retaining Strap

123887671
2426-21010: RNCC: 3 | RNVC: 2

20 Apr 2012

5340-12-366-7931
Angle Bracket

123667931
946979377: RNCC: 3 | RNVC: 2
3201-861.01.00.015-002: RNCC: 5 | RNVC: 2

8 Jun 2005

5340-12-331-4678
Webbing Strap

123314678
22-350-2B-157: RNCC: 3 | RNVC: 2
1701990: RNCC: 5 | RNVC: 2

7 May 1993

5340-12-321-8264
Access Cover

123218264
9000 2335: RNCC: 3 | RNVC: 2

29 Jun 1990

5340-12-383-3552
Manual Control Lever

123833552
1066869: RNCC: 3 | RNVC: 2

8 Oct 2010

5340-12-333-4832
Retaining Bail

123334832
391740: RNCC: 3 | RNVC: 2

22 Dec 1993

5340-12-386-8226
Angle Bracket

123868226
58003114: RNCC: 3 | RNVC: 2
CV190694: RNCC: 5 | RNVC: 2
58003114: RNCC: 5 | RNVC: 2

5 Oct 2011

5340-12-344-8262
Retaining Strap

123448262
81974010615: RNCC: 3 | RNVC: 2

15 Dec 1997

5340-12-350-6148
Handle Grip

123506148
11332203: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-12-383-5925
Runner

123835925
86641005: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-12-387-9283
Pipe Hanger

123879283
7093558: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-333-6585
Mounting Bracket

123336585
5900904040: RNCC: 3 | RNVC: 2

19 Jan 1994

5340-12-385-9447
Mounting Bracket

123859447
5320210440: RNCC: 3 | RNVC: 2

25 Jul 2011

5340-12-366-6373
Dust And Moisture Seal Protective Cap

123666373
08001136: RNCC: 3 | RNVC: 2

18 May 2005

5340-12-176-4853
Retaining Clip

121764853
03011319003: RNCC: 3 | RNVC: 2
81.92615-2035: RNCC: 5 | RNVC: 2
81926152035: RNCC: 5 | RNVC: 2

30 Nov 1978

5340-12-331-2278
Catch Strike

123312278
0286002: RNCC: 3 | RNVC: 2

5 Apr 1993

5340-12-305-6124
Angle Bracket

123056124
4219100224: RNCC: 3 | RNVC: 2

27 Nov 1985

5340-12-367-4650
Loop Clamp

123674650
EN4114F13WR1: RNCC: 2 | RNVC: 2

24 Aug 2005

5340-12-186-3831
Mounting Bracket

121863831
3557355: RNCC: 3 | RNVC: 2
3557355: RNCC: 5 | RNVC: 2

23 Dec 1980

5340-12-320-7122
Double Angle Bracket

123207122
9000 2312: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-025-8757

5340-12-044-2155

5340-12-379-4484
Rim Lock Set

123794484
PC120SB: RNCC: 3 | RNVC: 2
4003482024119: RNCC: 5 | RNVC: 2

23 Jul 2009

5340-12-367-9428
Hand Crank

123679428
1000042-197480: RNCC: 3 | RNVC: 2

9 Nov 2005

5340-12-044-4713

5340-12-359-7262
Mounting Plate

123597262
A2527387420000: RNCC: 3 | RNVC: 2
A2527387420000: RNCC: 5 | RNVC: 2

5 Mar 2003

5340-12-362-6905
Nonmetallic Bumper

123626905
S535M1046210: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-317-6740
Nonmetallic Bumper

123176740
4200069-105800.03: RNCC: 3 | RNVC: 2
4200069-105800.03: RNCC: 5 | RNVC: 9

27 Apr 1989

5340-12-162-6391
Angle Bracket

121626391
30-92101-0136: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-320-7054
Metal Runner

123207054
C249-A29-C44: RNCC: 2 | RNVC: 2
C249-A29-C44: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-362-4866
Nut And Bolt Locking Plate

123624866
4880216-00: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-12-344-0400
Rod End Clevis

123440400
2996.73.44: RNCC: 3 | RNVC: 2
2996.7344: RNCC: 5 | RNVC: 2

3 Sep 1997

5340-12-199-7623
Nonmetallic Bumper

121997623
4215014024: RNCC: 3 | RNVC: 2

29 May 1984

5340-12-022-5128

5340-12-091-3531

5340-12-348-6653
Nonmetallic Bumper

123486653
306101: RNCC: 3 | RNVC: 2

2 Aug 1999

5340-12-002-0055

5340-12-004-3852

5340-12-375-4249
Lock-Release Lever

123754249
915.159.001: RNCC: 3 | RNVC: 2

2 Jun 2008

5340-12-027-9037

5340-12-366-1110
Runner

123661110
279.663 730: RNCC: 2 | RNVC: 2
279.663 730: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-322-2349
Angle Bracket

123222349
54.3050.113.00: RNCC: 3 | RNVC: 2

3 Aug 1990

5340-12-329-3769
Rod End Clevis

123293769
2300248-80242.00: RNCC: 2 | RNVC: 2
2300248-80242.00: RNCC: 3 | RNVC: 2
EGAD003: RNCC: 3 | RNVC: 2
2300248-80242.00: RNCC: 5 | RNVC: 2
2300248-80242.00: RNCC: 5 | RNVC: 9

14 Aug 1992

5340-12-700-2407
Helical Compression Spring Seat

127002407
51-270487044: RNCC: 2 | RNVC: 2
765-65-423: RNCC: 3 | RNVC: 2

15 Nov 1991

5340-12-170-7476
Resilient Mount

121707476
2K2-AAM-60: RNCC: 3 | RNVC: 2
2K2-AAM-60: RNCC: 5 | RNVC: 9
2K2AAM60: RNCC: 5 | RNVC: 9

3 Aug 1977

5340-12-173-9998
Mending Plate

121739998
23302-141000.08: RNCC: 2 | RNVC: 2
8454790: RNCC: 3 | RNVC: 2
1102-185: RNCC: 5 | RNVC: 2
1102185: RNCC: 5 | RNVC: 2
23302-141000-08: RNCC: 5 | RNVC: 9
23302-141000.08: RNCC: 5 | RNVC: 9

29 May 1978

5340-12-317-4962
Access Door

123174962
171-02/64241: RNCC: 2 | RNVC: 2
171-02/64241: RNCC: 3 | RNVC: 2
171-02/64241: RNCC: 5 | RNVC: 9

13 Apr 1989

5340-12-195-6970
Webbing Strap

121956970
5801557-2020.00: RNCC: 2 | RNVC: 2
5801557-2020.00: RNCC: 3 | RNVC: 2
5801557-2020: RNCC: 5 | RNVC: 2
5801557-2020: RNCC: 5 | RNVC: 9

30 Mar 1983

5340-12-392-5948
Mounting Plate

123925948
5802010140: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-12-373-6280
Spacing Threaded Standoff

123736280
8710980290: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-12-384-7123
Manual Control Handle

123847123
4624375: RNCC: 3 | RNVC: 2

22 Mar 2011

5340-12-316-5807
Lock-Release Lever

123165807
5189375: RNCC: 3 | RNVC: 2

26 Jan 1989

5340-12-304-4261
Nonmetallic Bumper

123044261
10788: RNCC: 3 | RNVC: 2

16 Jul 1985

5340-12-020-7479

5340-12-092-0947

5340-12-370-4987
Retaining Band

123704987
6174900142: RNCC: 3 | RNVC: 2
617 490 01 42: RNCC: 5 | RNVC: 2

14 Nov 2006

5340-12-385-5895
Section Block Clamp

123855895
1827009360: RNCC: 3 | RNVC: 2

20 Jun 2011

5340-12-310-8581
Headless Straight Rod

123108581
2352401: RNCC: 3 | RNVC: 2

2 Jul 1987

5340-12-311-4142
Dust And Moisture Seal Protective Plug

123114142
2860002100: RNCC: 3 | RNVC: 2
2860 002 100: RNCC: 5 | RNVC: 2

31 Aug 1987

5340-12-027-8136

5340-12-323-7712
Electrical-Mechanical Equipment Post

123237712
70.1101.524-05: RNCC: 3 | RNVC: 2

17 Dec 1990

5340-12-177-3176
Strap Fastener Loop

121773176
42203-200-15: RNCC: 3 | RNVC: 2

29 Jan 1979

5340-12-352-9049
Rod End Connector

123529049
JN0255-10K: RNCC: 3 | RNVC: 2

4 Jan 2001

5340-12-304-6440
Pipe Bracket

123046440
5801841-400.000: RNCC: 2 | RNVC: 2
7800140700: RNCC: 3 | RNVC: 2
5801841-400.000: RNCC: 5 | RNVC: 9
78001 40700: RNCC: 5 | RNVC: 9

8 Aug 1985

5340-12-300-5277
Retaining Strap

123005277
E4-2027820: RNCC: 3 | RNVC: 2
E4-2027820: RNCC: 5 | RNVC: 9

10 Aug 1984

5340-12-321-1353
Mounting Bracket

123211353
46015-0071.01: RNCC: 3 | RNVC: 2
1000095-1285.01: RNCC: 5 | RNVC: 9

2 Apr 1990

5340-12-361-0338
Angle Bracket

123610338
J32320222-401: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-700-8432
Loop Clamp

127008432
VG95211-ML-127008432: RNCC: 2 | RNVC: 2
11 OST1 10494-72: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-312-2007
Strap Hinge

123122007
6010006: RNCC: 3 | RNVC: 2
100028: RNCC: 3 | RNVC: 2

2 Dec 1987

5340-12-313-2531
Sliding Stay

123132531
200339: RNCC: 3 | RNVC: 2
23K26 0008 00.002: RNCC: 5 | RNVC: 2

16 Mar 1988

5340-12-308-8146
Turnbuckle Body

123088146
8390780072: RNCC: 3 | RNVC: 2

18 Nov 1986

5340-12-192-6773
Spring Tension Clip

121926773
1249888678: RNCC: 3 | RNVC: 2
1073010040: RNCC: 5 | RNVC: 9

17 May 1982

5340-12-301-8583
Lock-Release Lever

123018583
537172-8226.000: RNCC: 2 | RNVC: 2
537172-8226.000: RNCC: 3 | RNVC: 2
537172-8226.000: RNCC: 5 | RNVC: 9

14 Nov 1984

5340-12-307-7041
Electrical-Mechanical Equipment Post

123077041
RP988626: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-010-4331

5340-12-189-1812
Schlingen- Klemme

5340-12-359-0462
Webbing Strap

123590462
4357928596: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-090-6457

5340-12-367-1684
Nonmetallic Bumper

123671684
3086601: RNCC: 3 | RNVC: 2

14 Jul 2005

5340-12-170-3810
Dust And Moisture Seal Protective Cap

121703810
E20253: RNCC: 3 | RNVC: 2

8 Jul 1977

5340-12-326-6531
Access Door Hinge

123266531
1039U10: RNCC: 3 | RNVC: 2
0745211010: RNCC: 5 | RNVC: 2

18 Oct 1991

5340-12-309-1637
Access Cover

123091637
KM.S01-210100.033: RNCC: 3 | RNVC: 2

19 Dec 1986

5340-12-179-1824
Retaining Strap

121791824
5800748-1311.021: RNCC: 3 | RNVC: 2
5800748-1311-021: RNCC: 5 | RNVC: 9

15 Jun 1979

5340-12-184-5195
Spring Tension Clip

121845195
5801339-020121-006: RNCC: 3 | RNVC: 2
5801339-020121.006: RNCC: 5 | RNVC: 2

29 Jul 1980

5340-12-199-6712
Angle Bracket

121996712
03436550: RNCC: 3 | RNVC: 2
0343 6550: RNCC: 5 | RNVC: 2
3436550EZ5071-01: RNCC: 5 | RNVC: 2
D5179-01-49.09: RNCC: 5 | RNVC: 2

19 May 1984

5340-12-376-4330
Angle Bracket

123764330
J28130075-403: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-12-171-5152
Angle Bracket

121715152
81974865002: RNCC: 3 | RNVC: 2

20 Oct 1977

5340-12-321-4112
Metal Runner

123214112
9000 6157: RNCC: 3 | RNVC: 2

16 May 1990

5340-12-043-2727

5340-12-357-3301
Webbing Strap

123573301
151-2303.18: RNCC: 3 | RNVC: 2

7 Jun 2002

5340-12-343-5668
Dust And Moisture Seal Protective Cap

123435668
50030600040: RNCC: 3 | RNVC: 2
F300 0T 022 4069: RNCC: 6 | RNVC: 9

3 Jul 1997

5340-12-362-0106
Mounting Bracket

123620106
JN1138B03: RNCC: 3 | RNVC: 2

16 Dec 2003

5340-12-317-2964
Plug Button

123172964
0009970425: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-358-8189
Access Cover

123588189
DDAA006: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-358-7396
Lock-Release Lever

123587396
6202600087: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-189-1843
Angle Bracket

121891843
8331594740: RNCC: 2 | RNVC: 2
8331594740: RNCC: 3 | RNVC: 2

9 Sep 1981

5340-12-313-1073
Manual Control Handle

123131073
4023R-712100.02: RNCC: 2 | RNVC: 2
4023R-712100.02: RNCC: 3 | RNVC: 2

4 Mar 1988

5340-12-198-7249
Clamping Catch

121987249
27 0322 032: RNCC: 2 | RNVC: 2
9837799: RNCC: 3 | RNVC: 2
27 0322 032: RNCC: 5 | RNVC: 9
9837799: RNCC: 5 | RNVC: 9
270322032: RNCC: 5 | RNVC: 9

22 Feb 1984

5340-12-179-5163
Retaining Strap

121795163
2200104: RNCC: 3 | RNVC: 2

4 Jul 1979

5340-12-365-5313
Mounting Plate

123655313
4376160011: RNCC: 3 | RNVC: 2

12 Jan 2005

5340-12-358-9235
Angle Bracket

123589235
3812711640: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-308-8398
Double Angle Bracket

123088398
SK143416: RNCC: 3 | RNVC: 2

21 Nov 1986

5340-12-180-1855
Support Hook

121801855
81667200004: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-12-197-7577
Webbing Strap

121977577
GE100353BW-8000: RNCC: 3 | RNVC: 2

21 Nov 1983

5340-12-304-9790
Strap Fastener Loop

123049790
5801557-1013.00: RNCC: 2 | RNVC: 2
5801557-1013.00: RNCC: 3 | RNVC: 2
5801557-1013.00: RNCC: 5 | RNVC: 9

12 Sep 1985

5340-12-338-0153
Handle Grip

123380153
0021-3514-690: RNCC: 3 | RNVC: 2
0021-3514-690: RNCC: 5 | RNVC: 9
21-0036-20-M16: RNCC: 5 | RNVC: 9

11 May 1995

5340-12-302-2969
Strap Fastener Loop

123022969
2300164-291180.002: RNCC: 2 | RNVC: 2
983785: RNCC: 3 | RNVC: 2
983785: RNCC: 5 | RNVC: 9
2300164-291180-002: RNCC: 5 | RNVC: 9
2300164-291180.002: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-12-317-2648
Dust And Moisture Seal Protective Cap

123172648
11.00555: RNCC: 3 | RNVC: 2

22 Mar 1989

5340-12-333-4877
Antipilferage Seal

123334877
US 906: RNCC: 3 | RNVC: 2
US906: RNCC: 5 | RNVC: 2
US906: RNCC: 5 | RNVC: 2
US906: RNCC: 5 | RNVC: 2

22 Dec 1993

5340-12-310-2887
Nonmetallic Solid Wheel

123102887
1068831: RNCC: 2 | RNVC: 2
1068831: RNCC: 3 | RNVC: 2

5 May 1987

5340-12-136-8248

5340-12-306-4427
Lock-Release Lever

123064427
6151798: RNCC: 3 | RNVC: 2

28 Feb 1986

5340-12-314-0966
Mounting Bracket

123140966
43712655-601: RNCC: 2 | RNVC: 2
43712655-601: RNCC: 3 | RNVC: 2

7 Jun 1988

5340-12-362-7286
Nonmetallic Bumper

123627286
20.137-602: RNCC: 3 | RNVC: 9

24 Mar 2004

5340-12-090-7144

5340-12-158-1040
Mending Plate

121581040
781011222: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-358-7497
Section Block Clamp

123587497
9412680588: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-364-6626
Support Hook

123646626
209339: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-361-1985
Dust And Moisture Seal Protective Cap-Plug

123611985
7861011010: RNCC: 2 | RNVC: 2
7861011010: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-12-361-5710
Access Cover

123615710
7835013000: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-12-347-1364
Double Angle Bracket

123471364
54.1094.719.00: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-12-343-1878
Double Angle Bracket

123431878
7970094: RNCC: 3 | RNVC: 2
797.0094: RNCC: 5 | RNVC: 2

15 May 1997

5340-12-351-9129
Mounting Plate

123519129
111G08018: RNCC: 3 | RNVC: 2

14 Sep 2000

5340-12-339-9745
Access Cover

123399745
5802017-714550.01: RNCC: 2 | RNVC: 2

8 Feb 1996

5340-12-328-1158
Mending Plate

123281158
5803578-139000.02: RNCC: 2 | RNVC: 2
5803578-139000.02: RNCC: 3 | RNVC: 2

8 Apr 1992

5340-12-329-6982
Mending Plate

123296982
1300556-132000-03-01: RNCC: 2 | RNVC: 2
1300556-132000-03-01: RNCC: 3 | RNVC: 2
49.030.32000.03: RNCC: 5 | RNVC: 9

22 Sep 1992

5340-12-356-4584
Mechanical Stop

123564584
2339-070010A05B: RNCC: 3 | RNVC: 2

1 Mar 2002

5340-12-356-5324
Mounting Bracket

123565324
11.44086-0534: RNCC: 3 | RNVC: 2
11.44000-2610POS275: RNCC: 5 | RNVC: 2

8 Mar 2002

5340-12-310-4833
Extension Drawer Slide Section

123104833
5801429-1311.013: RNCC: 3 | RNVC: 2

26 May 1987

5340-12-383-9687
Spring Tension Clip

123839687
1901.0042: RNCC: 3 | RNVC: 2

30 Dec 2010

5340-12-317-8628
Nut And Bolt Locking Plate

123178628
3229940230: RNCC: 3 | RNVC: 2

19 May 1989

5340-12-351-4987
Access Cover

123514987
6010100167: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-094-6684

5340-12-156-3033
Riegel

121563033
101711101: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-338-4092
Dust And Moisture Seal Protective Cap

123384092
25 1156 06 00 02: RNCC: 3 | RNVC: 2
25 1156 06 00 02: RNCC: 5 | RNVC: 2
251156060002: RNCC: 5 | RNVC: 2

4 Jul 1995

5340-12-360-3421
Nonmetallic Bumper

123603421
DIN95364-E50X35-NBR70ST: RNCC: 2 | RNVC: 2

13 May 2003

5340-12-354-3179
Butt Hinge

123543179
510.000.012: RNCC: 3 | RNVC: 2
510.000.012: RNCC: 5 | RNVC: 2

2 Jul 2001

5340-12-387-0322
Mounting Plate

123870322
5802017-719410.00: RNCC: 2 | RNVC: 2
5802017-719410.00: RNCC: 3 | RNVC: 2

27 Oct 2011

5340-12-314-6565
Access Cover

123146565
272.336 732: RNCC: 2 | RNVC: 2
272.336.732: RNCC: 3 | RNVC: 2
272.336 732: RNCC: 5 | RNVC: 9

27 Jul 1988

5340-12-321-5790
Support Hook

123215790
4Z09448: RNCC: 3 | RNVC: 2
09448: RNCC: 5 | RNVC: 2

5 Jun 1990

5340-12-341-2093
Clamping Catch

123412093
V917L01-1X1BP: RNCC: 3 | RNVC: 2
909681208: RNCC: 5 | RNVC: 2
1121268C00: RNCC: 5 | RNVC: 2

9 Aug 1996

5340-12-358-8175
Clamping Catch

123588175
U15.145000.00-00: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-306-8972
Retaining Strap

123068972
5900062-10400.02: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-12-310-7786
Bow Handle

123107786
004999: RNCC: 3 | RNVC: 2
LM1543-120: RNCC: 5 | RNVC: 9

30 Jun 1987

5340-12-320-7121
Angle Bracket

123207121
9000 2181: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-324-2767
Elastic Strap

123242767
335948-8434.000: RNCC: 2 | RNVC: 2
335948-8434.000: RNCC: 3 | RNVC: 2
335948-8434.000: RNCC: 5 | RNVC: 9

1 Feb 1991

5340-12-354-4748
Nonmetallic Bumper

123544748
38652MITTEL: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-12-352-0523
Access Cover

123520523
54.0056.010.08: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-12-345-2260
Runner

123452260
057-40: RNCC: 3 | RNVC: 2

12 Feb 1998

5340-12-358-7360
Webbing Strap

123587360
P20547: RNCC: 3 | RNVC: 2

11 Nov 2002

Load More Results