What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 48 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 48 of 178

5340-12-314-3204
Resilient Mount

123143204
DIN95369-A4-2-M10-CR-ST: RNCC: 2 | RNVC: 2
1340211020: RNCC: 3 | RNVC: 2
26005030040: RNCC: 5 | RNVC: 2
151007-M10-CR.ST-50: RNCC: 5 | RNVC: 2
60-201-050 M10: RNCC: 5 | RNVC: 2
VG95369-A4-2-M10-CR-ST: RNCC: 5 | RNVC: 9
C2040G M10: RNCC: 5 | RNVC: 9

25 Jun 1988

5340-12-331-8211
Butt Hinge

123318211
P-244264-415: RNCC: 3 | RNVC: 2
P244264-415: RNCC: 5 | RNVC: 2
P-244264-415: RNCC: 5 | RNVC: 2

24 Jun 1993

5340-12-310-2514
Resilient Mount

123102514
DIN95363-C50X45-NR45AMMS: RNCC: 2 | RNVC: 2
1.50.45.2.45NR/AMMS: RNCC: 5 | RNVC: 2
811.020.050.045.10.NR45.AMMS: RNCC: 5 | RNVC: 2
577K08707: RNCC: 5 | RNVC: 2
81120-50X45-M10.NR45.AMMS: RNCC: 5 | RNVC: 2
VG95363-C50X45-NR45AMMS: RNCC: 5 | RNVC: 9

27 Apr 1987

5340-12-132-7601
Retaining Strap

121327601
0996 2613: RNCC: 3 | RNVC: 2
6.0402.05.0.0106: RNCC: 3 | RNVC: 9
6-0402-05-0-0106: RNCC: 5 | RNVC: 9
A1X6N1148: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-387-0428
Retaining Clip

123870428
40025263: RNCC: 2 | RNVC: 2
40025263: RNCC: 3 | RNVC: 2

28 Oct 2011

5340-12-357-7794
Loop Clamp

123577794
2300042-255627.000: RNCC: 2 | RNVC: 2
9940180: RNCC: 3 | RNVC: 2
2300042-255627.000: RNCC: 5 | RNVC: 2

23 Jul 2002

5340-12-348-0961
Webbing Strap

123480961
T13377: RNCC: 3 | RNVC: 2
T13377: RNCC: 5 | RNVC: 2

13 Apr 1999

5340-12-353-9300
Mending Plate

123539300
16000026: RNCC: 3 | RNVC: 2

18 May 2001

5340-12-394-1878
Corrosion Preventive Anode

123941878
182.2201171000: RNCC: 3 | RNVC: 2

11 Nov 2013

5340-12-384-2067
Rail Gui Connector

123842067
17332: RNCC: 3 | RNVC: 2

2 Feb 2011

5340-12-195-1137
Access Cover

121951137
1000151-275000.04: RNCC: 2 | RNVC: 2
1000151-275000.04: RNCC: 5 | RNVC: 2

13 Jan 1983

5340-12-383-9513
Manual Control Lever

123839513
071 467 030 000: RNCC: 3 | RNVC: 2

28 Dec 2010

5340-12-386-5702
Dust And Moisture Seal Protective Cap

123865702
360103066H: RNCC: 3 | RNVC: 2
G2K03902067910: RNCC: 5 | RNVC: 2

12 Sep 2011

5340-12-394-0497
Mounting Plate

123940497
11.28044-1129: RNCC: 3 | RNVC: 2
11.28044-1129: RNCC: 5 | RNVC: 2

31 Oct 2013

5340-12-330-8384
Webbing Strap

123308384
1475-9713.02: RNCC: 3 | RNVC: 2
1475-9713.02: RNCC: 5 | RNVC: 2

16 Feb 1993

5340-12-134-4924

5340-12-041-7044

5340-12-331-9186
Plug Button

123319186
553 5111: RNCC: 3 | RNVC: 2
553 5111: RNCC: 5 | RNVC: 2
5535111: RNCC: 5 | RNVC: 2

6 Jul 1993

5340-12-186-7874
Metal Runner

121867874
81929010083: RNCC: 3 | RNVC: 2

4 Feb 1981

5340-12-332-6020
Handle Grip

123326020
6736800270: RNCC: 3 | RNVC: 2

26 Aug 1993

5340-12-348-8601
Mounting Bracket

123488601
4374200386: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-12-337-9014
Mounting Bracket

123379014
2300088-713205.00: RNCC: 2 | RNVC: 2
2300088-713205.00: RNCC: 3 | RNVC: 2
9851221: RNCC: 5 | RNVC: 9
2300088-713205.00: RNCC: 5 | RNVC: 9

2 May 1995

5340-12-188-8157
Retaining Strap

121888157
450900-6662: RNCC: 3 | RNVC: 2

30 Jul 1981

5340-12-043-2558

5340-12-360-9088
Dust And Moisture Seal Protective Plug

123609088
700088016000: RNCC: 3 | RNVC: 2
16MMN88: RNCC: 5 | RNVC: 2

23 Jul 2003

5340-12-382-6694
Retaining Strap

123826694
806276373: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-12-314-7927
Leather Strap

123147927
T12207: RNCC: 3 | RNVC: 2
T12207: RNCC: 5 | RNVC: 9

11 Aug 1988

5340-12-135-7260

5340-12-359-9291
Helical Compression Spring Retainer

123599291
0131 8983: RNCC: 3 | RNVC: 2
1410200025: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-12-381-7892
Webbing Strap

123817892
1074151SSI-7540: RNCC: 3 | RNVC: 2

31 Mar 2010

5340-12-362-9637
Mounting Bracket

123629637
504.119: RNCC: 3 | RNVC: 2

21 Apr 2004

5340-12-362-7409
Nonmetallic Bumper

123627409
5200.320.060.001: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-12-196-7218
Caster Wheel

121967218
026086: RNCC: 3 | RNVC: 2
26086: RNCC: 5 | RNVC: 9

8 Aug 1983

5340-12-149-1176
Angle Bracket

121491176
521L02029: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-321-0189
Dust And Moisture Seal Protective Cap

123210189
PAN3863H04: RNCC: 3 | RNVC: 2

16 Mar 1990

5340-12-318-9208
Dust And Moisture Seal Protective Cap

123189208
8977540004: RNCC: 3 | RNVC: 2

24 Aug 1989

5340-12-171-7626
Loop Clamp

121717626
LN9491BK12: RNCC: 2 | RNVC: 2

11 Nov 1977

5340-12-182-4136
Helical Compression Spring Retainer

121824136
0287 4046: RNCC: 3 | RNVC: 2
2874046: RNCC: 5 | RNVC: 2
2874046EE0693-60: RNCC: 5 | RNVC: 2

30 Jan 1980

5340-12-173-4296
Turnbuckle Body

121734296
01TL30162: RNCC: 3 | RNVC: 2

14 Apr 1978

5340-12-392-5995
Mending Plate

123925995
HRL-0-SIP-A4: RNCC: 3 | RNVC: 2
909623124: RNCC: 5 | RNVC: 2

20 Jun 2013

5340-12-327-7145
Loop Clamp

123277145
DIN3016-1-D1-14X20-W5-CR: RNCC: 2 | RNVC: 2
RSGU1.14/20W5: RNCC: 3 | RNVC: 2
DIN3016-D1-14X20-W3-1: RNCC: 5 | RNVC: 9
DIN3016-D1-14X20-W5: RNCC: 5 | RNVC: 9

21 Feb 1992

5340-12-356-9385
Mounting Plate

123569385
4139173: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-12-376-6770
Loop Clamp

123766770
RSGU1.8/15-W5-SILIKON: RNCC: 3 | RNVC: 2
09418195008: RNCC: 5 | RNVC: 2

28 Oct 2008

5340-12-321-5466
Mending Plate

123215466
P-050366-010: RNCC: 3 | RNVC: 2
P050366-010: RNCC: 5 | RNVC: 2

30 May 1990

5340-12-332-4366
Mounting Bracket

123324366
5-440-023: RNCC: 3 | RNVC: 2
5-440 023: RNCC: 5 | RNVC: 9
5-440023: RNCC: 5 | RNVC: 9
440 023: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-12-315-2028
Dust And Moisture Seal Protective Cap-Plug

123152028
TL-4-035: RNCC: 3 | RNVC: 2

30 Sep 1988

5340-12-317-4202
Angle Bracket

123174202
P-145502-050: RNCC: 3 | RNVC: 2
P145502-050: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-702-6564
Mounting Bracket

127026564
VG95211-ML-127026564: RNCC: 2 | RNVC: 2
PF-1-3826 OST 38.05347-84: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-128-9606
Retaining Strap

121289606
VG95933ER-22-MS-BK: RNCC: 2 | RNVC: 2
1/2D22MMN325-CUZN37F29: RNCC: 3 | RNVC: 2
1-2D22MMN325MS: RNCC: 5 | RNVC: 2
1/2D22MMN325MS: RNCC: 5 | RNVC: 2
378117: RNCC: 5 | RNVC: 2
700325022103: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-311-5437
Resilient Mount

123115437
DIN95362F1-5,5MM BOHRUNGENNR55ST: RNCC: 2 | RNVC: 2
725001-NR55.ST-5,5MM BOHRUNGEN: RNCC: 5 | RNVC: 2
301131-023020.005.0: RNCC: 5 | RNVC: 2
V-TEILE,F1,5,5MMBOHRUNG,55NR/ST: RNCC: 5 | RNVC: 2
81820-5,5 MM BOHRUNGEN.NR55.ST: RNCC: 5 | RNVC: 2
VG95362F1-5,5MM BOHRUNGEN-NR55ST: RNCC: 5 | RNVC: 9
VG95362-F-5,5MM BOHRUNGEN-NR55ST: RNCC: 5 | RNVC: 9

16 Sep 1987

5340-12-310-1132
Electrical-Mechanical Equipment Post

123101132
VG95148B6XM3X30-POLYAMID-GV-SW: RNCC: 2 | RNVC: 2
5.30.330: RNCC: 3 | RNVC: 2
VG95148B6XM3X30-POLYAMID-GV-SW: RNCC: 3 | RNVC: 2

8 Apr 1987

5340-12-702-4172
Retaining Bail

127024172
VG95211-ML-127024172: RNCC: 2 | RNVC: 2
5.12.7050.0030.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-185-0001
Mounting Bracket

121850001
F01-211160.05.0: RNCC: 3 | RNVC: 2
F01-211160-05-0: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-12-330-0832
Dust And Moisture Seal Protective Cap

123300832
250/114,3: RNCC: 3 | RNVC: 2
GPN250/114,3: RNCC: 5 | RNVC: 2
GPN250-114,3: RNCC: 5 | RNVC: 9

30 Oct 1992

5340-12-305-0541
Angle Bracket

123050541
A-231233-001: RNCC: 3 | RNVC: 2
A231233-001: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-701-7367
Retaining Strap

127017367
VG95211-ML-127017367: RNCC: 2 | RNVC: 2
5.12.7608.8320.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-2032
Mechanical Stop

123582032
2500262-190300.003.0: RNCC: 2 | RNVC: 2
2500262-190300.003.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-305-0739
Mending Plate

123050739
97.5-00.2: RNCC: 3 | RNVC: 2

24 Sep 1985

5340-12-181-6694
Platte

121816694
03-202: RNCC: 3 | RNVC: 2
90-10475-3: RNCC: 5 | RNVC: 2

10 Dec 1979

5340-12-330-9983
Nonmetallic Bumper

123309983
F1301-121940C: RNCC: 2 | RNVC: 2
F1301-121940: RNCC: 3 | RNVC: 2
F1301-121940C: RNCC: 5 | RNVC: 2

9 Mar 1993

5340-12-375-4722
Mounting Bracket

123754722
58R153-26311: RNCC: 2 | RNVC: 2
58R153-26311: RNCC: 3 | RNVC: 2

5 Jun 2008

5340-12-356-6379
Multiple Angle Bracket

123566379
R06162-401: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-300-0305
Electrical-Mechanical Equipment Post

123000305
1202-20.10: RNCC: 3 | RNVC: 2
001-202.020-010: RNCC: 5 | RNVC: 2

27 Jun 1984

5340-12-197-7781
Mending Plate

121977781
5005335840: RNCC: 3 | RNVC: 2

22 Nov 1983

5340-12-156-7447
Dust And Moisture Seal Protective Plug

121567447
104296001: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-358-9696
Angle Bracket

123589696
3813120852: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-302-8247
Angle Bracket

123028247
4618350114: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-359-7335
Mounting Bracket

123597335
S281M3038101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-348-2112
Door Button

123482112
409202092: RNCC: 3 | RNVC: 2

7 May 1999

5340-12-167-9062
Electrical-Mechanical Equipment Post

121679062
WW410516: RNCC: 3 | RNVC: 2
WW410516: RNCC: 5 | RNVC: 2
WW410516: RNCC: 5 | RNVC: 2
WW 410 516: RNCC: 5 | RNVC: 2

2 Feb 1977

5340-12-164-5107

5340-12-199-6262
Retaining Strap

121996262
43712534-601: RNCC: 2 | RNVC: 2
43712534-601: RNCC: 3 | RNVC: 2

17 May 1984

5340-12-338-7863
Mounting Plate

123387863
4110017208: RNCC: 3 | RNVC: 2

24 Aug 1995

5340-12-362-1713
Mounting Plate

123621713
00M0230000016011: RNCC: 3 | RNVC: 2

20 Jan 2004

5340-12-341-5381
Metallic Bumper

123415381
1774901: RNCC: 3 | RNVC: 2
EZ17749: RNCC: 5 | RNVC: 2

18 Sep 1996

5340-12-388-0269
Loop Clamp

123880269
1159950465: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-12-386-5700
Mending Plate

123865700
5241870147: RNCC: 3 | RNVC: 2

12 Sep 2011

5340-12-345-4105
Double Angle Bracket

123454105
8712033440: RNCC: 2 | RNVC: 2
8712033440: RNCC: 3 | RNVC: 2
871 203 34 40: RNCC: 5 | RNVC: 2

11 Mar 1998

5340-12-370-7815
Spring Tension Clip

123707815
90497017: RNCC: 3 | RNVC: 2
0564743: RNCC: 5 | RNVC: 2

20 Dec 2006

5340-12-323-8936
Detent Plunger

123238936
55732S0100: RNCC: 3 | RNVC: 2

8 Jan 1991

5340-12-306-6282
Strap Fastener Loop

123066282
6030039: RNCC: 3 | RNVC: 2

17 Mar 1986

5340-12-360-7086
Flush Bolt

123607086
000611.252111.00: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-312-7906
Friction Catch Stud

123127906
6030215: RNCC: 3 | RNVC: 2
0177326: RNCC: 5 | RNVC: 2

5 Feb 1988

5340-12-024-0758

5340-12-166-0877
Helical Compression Spring Seat

121660877
E143-015: RNCC: 3 | RNVC: 2
E143015: RNCC: 5 | RNVC: 9

29 Jul 1976

5340-12-178-3000
Extension Drawer Slide Section

121783000
C106-A44-C105: RNCC: 2 | RNVC: 2
C106A44C105: RNCC: 3 | RNVC: 2
C106-A44-C105: RNCC: 5 | RNVC: 2
C106-A44-C105: RNCC: 5 | RNVC: 2
C106A44C105: RNCC: 5 | RNVC: 2

12 Apr 1979

5340-12-158-7534
Retaining Strap

121587534
8380780135: RNCC: 3 | RNVC: 2
4799-023: RNCC: 5 | RNVC: 2
4799023: RNCC: 5 | RNVC: 2
600337: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-355-1431
Mounting Bracket

123551431
4614300110: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-12-366-2092
Mounting Bracket

123662092
300.040.710: RNCC: 3 | RNVC: 2

22 Mar 2005

5340-12-180-3564
Dust And Moisture Seal Protective Plug

121803564
300F181: RNCC: 3 | RNVC: 2
GPN300F181: RNCC: 5 | RNVC: 2
300018100: RNCC: 5 | RNVC: 9
F181: RNCC: 5 | RNVC: 9
F181GPN300: RNCC: 5 | RNVC: 9
GPN300,F181: RNCC: 5 | RNVC: 9

5 Sep 1979

5340-12-322-3408
Retaining Strap

123223408
B291P: RNCC: 3 | RNVC: 2
5L.4994.002.25: RNCC: 5 | RNVC: 2
5L.4994.002.25: RNCC: 5 | RNVC: 2

13 Aug 1990

5340-12-306-1331
Retaining Strap

123061331
3379950032: RNCC: 3 | RNVC: 2

30 Jan 1986

5340-12-177-2268
Retaining Strap

121772268
WG402705AU: RNCC: 3 | RNVC: 9
WG 402 705 AU: RNCC: 5 | RNVC: 2
WG402705AU: RNCC: 5 | RNVC: 2
WG 402 705 AU: RNCC: 5 | RNVC: 9

22 Jan 1979

5340-12-364-1590
Cushioning Pad

123641590
4367277079: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-12-317-1811
Mounting Bracket

123171811
4606400251: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-358-6305
Loop Clamp

123586305
6249950065: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-12-383-9620
Swivel Caster

123839620
2005.0502: RNCC: 3 | RNVC: 2
2005.0604: RNCC: 5 | RNVC: 9

29 Dec 2010

5340-12-385-5498
Mounting Bracket

123855498
5581870640: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-12-167-1939
Angle Bracket

121671939
5326: RNCC: 3 | RNVC: 2
5326: RNCC: 5 | RNVC: 2

1 Dec 1976

5340-12-300-2692
Mending Plate

123002692
A11A121110421: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-190-1901
Electrical-Mechanical Equipment Post

121901901
1000042-150000.07: RNCC: 3 | RNVC: 2
22792B: RNCC: 5 | RNVC: 2

10 Nov 1981

5340-12-382-8100
Swivel Caster

123828100
374346: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-12-149-0916
Retaining Strap

121490916
121G10010: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-091-3393

5340-12-177-4126
Double Angle Bracket

121774126
2300002-122100.055: RNCC: 2 | RNVC: 2
2300002-122100.055: RNCC: 3 | RNVC: 2
2300002-122100-055: RNCC: 5 | RNVC: 9
2300002-122100.055: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-322-5559
Extension Drawer Slide

123225559
MEM16-5027G1: RNCC: 3 | RNVC: 2

31 Aug 1990

5340-12-340-6043
Escutcheon Plate

123406043
154 788-00000: RNCC: 3 | RNVC: 2

10 May 1996

5340-12-321-9913
Manual Control Handle

123219913
60817-051: RNCC: 3 | RNVC: 2

16 Jul 1990

5340-12-300-9864
Angle Bracket

123009864
5802112-3100.00: RNCC: 2 | RNVC: 2
7802042310: RNCC: 3 | RNVC: 2
78020 42310: RNCC: 5 | RNVC: 9

15 Sep 1984

5340-12-090-9757

5340-12-361-7606
Angle Bracket

123617606
T671M1009210: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-12-322-0998
Double Angle Bracket

123220998
42083440: RNCC: 3 | RNVC: 2
42083440KZ50-7134: RNCC: 5 | RNVC: 2

24 Jul 1990

5340-12-361-0770
Runner

123610770
A1Z10298544: RNCC: 2 | RNVC: 2
A1Z10298544: RNCC: 3 | RNVC: 2
10298544: RNCC: 5 | RNVC: 2

19 Aug 2003

5340-12-041-2337

5340-12-010-7459

5340-12-311-3048
Ball Socket Seat

123113048
302K07003: RNCC: 3 | RNVC: 2

14 Aug 1987

5340-12-020-7457

5340-12-326-0908
Spring Tension Clip

123260908
307.601-60410.75: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-12-319-6108
Mending Plate

123196108
5540501: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-12-177-5113
Handle Grip

5340-12-322-2872
Dust And Moisture Seal Protective Cap

123222872
45.6022: RNCC: 3 | RNVC: 2
522509: RNCC: 3 | RNVC: 2

8 Aug 1990

5340-12-321-4086
Access Cover

123214086
2595801: RNCC: 3 | RNVC: 2

16 May 1990

5340-12-313-4635
Nonmetallic Bumper

123134635
200.683: RNCC: 3 | RNVC: 2

1 Apr 1988

5340-12-350-4451
Retaining Strap

123504451
12296301: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-350-9252
Buckle

123509252
07.0520.49: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-12-310-2527
Lock-Release Lever

123102527
6183521: RNCC: 3 | RNVC: 2

28 Apr 1987

5340-12-309-8303
Dust And Moisture Seal Protective Cap

123098303
E3465: RNCC: 3 | RNVC: 2
42481447: RNCC: 5 | RNVC: 2

6 Mar 1987

5340-12-382-2384
Mounting Bracket

123822384
S259M1063101: RNCC: 3 | RNVC: 2

26 May 2010

5340-12-321-9335
Helical Compression Spring Retainer

123219335
1480520029: RNCC: 3 | RNVC: 2
1480520029: RNCC: 5 | RNVC: 2
1480520029: RNCC: 5 | RNVC: 9

10 Jul 1990

5340-12-308-2040
Butt Hinge Leaf

123082040
03440101: RNCC: 3 | RNVC: 2

12 Sep 1986

5340-12-352-0352
Swivel Caster

123520352
219398: RNCC: 3 | RNVC: 2
21939864: RNCC: 5 | RNVC: 9

6 Oct 2000

5340-12-318-5846
Mending Plate

123185846
4356827081: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-12-329-6985
Kunst Gleitschiene

123296985
2300248-80420.03: RNCC: 2 | RNVC: 2
2300248-80420.03: RNCC: 3 | RNVC: 2
2300248-80420.03: RNCC: 5 | RNVC: 2

22 Sep 1992

5340-12-158-7330

5340-12-040-4613

5340-12-373-8714
Mending Plate

123738714
J51520030-013: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-12-314-0386
Mending Plate

123140386
C42298-A40-C34: RNCC: 3 | RNVC: 2

1 Jun 1988

5340-12-338-8538
Mounting Bracket

123388538
463-223066.000: RNCC: 3 | RNVC: 9
9898545: RNCC: 5 | RNVC: 9

31 Aug 1995

5340-12-312-5444
Mending Plate

123125444
4200081-151330.002: RNCC: 3 | RNVC: 2
4200081-151330.002: RNCC: 5 | RNVC: 9
9844875: RNCC: 5 | RNVC: 9
4200081-151330.002: RNCC: 5 | RNVC: 9

15 Jan 1988

5340-12-177-5683
Mounting Bracket

121775683
2300002-151160.001: RNCC: 2 | RNVC: 2
2300002-151160.001: RNCC: 3 | RNVC: 2
2300002-151160-001: RNCC: 5 | RNVC: 9
2300002-151160.001: RNCC: 5 | RNVC: 9

7 Feb 1979

5340-12-394-2139
Friction Catch Stud

123942139
NO PRIMARY REF 12-394-2139: RNCC: 3 | RNVC: 2
F7-537: RNCC: 5 | RNVC: 2

12 Nov 2013

5340-12-308-5697
Angle Bracket

123085697
P-295435-001: RNCC: 3 | RNVC: 2
P295435-001: RNCC: 5 | RNVC: 2

24 Oct 1986

5340-12-177-9043
Bow Handle

121779043
09.069.36.501: RNCC: 3 | RNVC: 2
09-069-36-501: RNCC: 5 | RNVC: 2

7 Mar 1979

5340-12-167-1006
Loop Clamp

121671006
136.182: RNCC: 3 | RNVC: 2
136-182: RNCC: 5 | RNVC: 2
1016-1600-0001: RNCC: 5 | RNVC: 9
E1016-1600-0001: RNCC: 5 | RNVC: 9

23 Nov 1976

5340-12-363-6548
Dust And Moisture Seal Protective Plug

123636548
893877665A: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-12-183-9046
Loop Clamp

121839046
2101068: RNCC: 3 | RNVC: 9

29 May 1980

5340-12-374-5943
Tee Hinge

123745943
219-9109: RNCC: 3 | RNVC: 2

28 Feb 2008

5340-12-179-6979
Angle Bracket

121796979
4255241540: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-12-375-2215
Access Cover

123752215
L533M1187210: RNCC: 3 | RNVC: 2

6 May 2008

5340-12-336-0558
Dust And Moisture Seal Protective Cap

123360558
63 6390 208 502: RNCC: 3 | RNVC: 2
636390 208 502: RNCC: 5 | RNVC: 2

17 Oct 1994

5340-12-343-4287
Mounting Bracket

123434287
8712300047: RNCC: 3 | RNVC: 2
8712350027: RNCC: 5 | RNVC: 9

19 Jun 1997

5340-12-354-0755
Spacing Threaded Standoff

123540755
03778700: RNCC: 3 | RNVC: 2

31 May 2001

5340-12-333-9588
Spring Tension Clip

123339588
SCO5179 ZN8: RNCC: 3 | RNVC: 2
15110051: RNCC: 5 | RNVC: 2
15110051: RNCC: 5 | RNVC: 2
SCO5179: RNCC: 5 | RNVC: 9

28 Feb 1994

5340-12-305-3126
Escutcheon Plate

123053126
4067660105: RNCC: 3 | RNVC: 2

21 Oct 1985

5340-12-150-6277
Rod End Connector

121506277
A6LN29603: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-357-2782
Manual Control Lever

123572782
81264106024: RNCC: 3 | RNVC: 2
81.26410.6024: RNCC: 5 | RNVC: 2

29 May 2002

5340-12-393-4087
Nut And Bolt Retainer

123934087
M5757021320200: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-12-185-6162
Support Hook

121856162
3553944: RNCC: 3 | RNVC: 2

21 Oct 1980

5340-12-386-6881
Spacing Threaded Standoff

123866881
05.03.253: RNCC: 3 | RNVC: 2

22 Sep 2011

5340-12-321-8863
Retaining Strap

123218863
3815280421: RNCC: 3 | RNVC: 2

5 Jul 1990

5340-12-311-1183
Resilient Mount

123111183
7002-GA: RNCC: 3 | RNVC: 2

28 Jul 1987

5340-12-184-6692
Rod End Connector

121846692
213G20T52: RNCC: 3 | RNVC: 2

12 Aug 1980

5340-12-332-3874
Flare Lock Fastener

123323874
6019971386: RNCC: 3 | RNVC: 2

5 Aug 1993

5340-12-010-8503

5340-12-321-4032
Mounting Plate

123214032
208136: RNCC: 3 | RNVC: 2

16 May 1990

5340-12-369-5851
Retaining Clip

123695851
90576217: RNCC: 3 | RNVC: 2
0564763: RNCC: 5 | RNVC: 2
0564711: RNCC: 5 | RNVC: 9

27 Jul 2006

5340-12-010-2321

5340-12-325-7299
Escutcheon Plate

123257299
3016850025: RNCC: 3 | RNVC: 2

3 Jul 1991

5340-12-361-0802
Mounting Bracket

123610802
0853 9350.042: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-12-070-1614

5340-12-333-0691
Rod End Clevis

123330691
2674: RNCC: 3 | RNVC: 2
0915795: RNCC: 5 | RNVC: 9
00009157950: RNCC: 5 | RNVC: 9

26 Oct 1993

5340-12-367-9667
Nonmetallic Bumper

123679667
5592370012: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-12-133-2968

5340-12-341-9523
Mounting Bracket

123419523
236 803: RNCC: 3 | RNVC: 2
236 450 02: RNCC: 5 | RNVC: 2

20 Nov 1996

5340-12-309-1627
Angle Bracket

123091627
KM.S01-140100.012: RNCC: 3 | RNVC: 2

19 Dec 1986

5340-12-311-6738
Mounting Bracket

123116738
100-00082-15.00: RNCC: 2 | RNVC: 2
100-00082-15.00: RNCC: 3 | RNVC: 2

5 Oct 1987

5340-12-321-8063
Angle Bracket

123218063
2300002-122430.002: RNCC: 2 | RNVC: 2
2300002-122430.002: RNCC: 3 | RNVC: 2
2300002-122430.002: RNCC: 3 | RNVC: 2
9832448: RNCC: 5 | RNVC: 2
9832448: RNCC: 5 | RNVC: 9
2300002-122430-002: RNCC: 5 | RNVC: 9
2300002-122430.002: RNCC: 5 | RNVC: 9

28 Jun 1990

5340-12-392-9861
Mending Plate

123929861
9270953001: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-12-390-7483
Split Tubular Clip

123907483
8902440149: RNCC: 3 | RNVC: 2

7 Dec 2012

5340-12-181-2912
Retaining Strap

121812912
0287 6501: RNCC: 3 | RNVC: 2
2876501: RNCC: 5 | RNVC: 2
2876501KZ0704-79: RNCC: 5 | RNVC: 2

12 Nov 1979

5340-12-180-1666
Dust And Moisture Seal Protective Cap

121801666
200Z14X15RAL1016: RNCC: 3 | RNVC: 2
GPN200Z14X15RAL1016: RNCC: 5 | RNVC: 2
200Z14X15 GELB: RNCC: 5 | RNVC: 9
Z14X15RAL1016GPN200: RNCC: 5 | RNVC: 9
200141510: RNCC: 5 | RNVC: 9
GPN200,Z14X15,GELB: RNCC: 5 | RNVC: 9
Z14X15RAL1016: RNCC: 5 | RNVC: 9

27 Aug 1979

5340-12-180-2139
Loop Clamp

121802139
02597285: RNCC: 3 | RNVC: 2
2597285EZ5755-31: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-365-2735
Dust And Moisture Seal Protective Plug

123652735
4089870044: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-382-6822
Retaining Strap

123826822
806278193: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-12-169-2087
Dust And Moisture Seal Protective Cap

121692087
3854660096: RNCC: 3 | RNVC: 2

22 Apr 1977

5340-12-091-3373

5340-12-367-6197
Mounting Plate

123676197
2306814000: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-12-322-7876
Furniture Glide

123227876
396-4534: RNCC: 3 | RNVC: 2

21 Sep 1990

5340-12-378-2994
Double Angle Bracket

123782994
41229131: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-12-139-8562

5340-12-324-2479
Spring Tension Clip

123242479
1264010828: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-12-315-0974
Mending Plate

123150974
1001030002: RNCC: 3 | RNVC: 2
8691510055: RNCC: 5 | RNVC: 2

15 Sep 1988

5340-12-380-6448
Butt Hinge

123806448
105-86597.13: RNCC: 3 | RNVC: 2

16 Nov 2009

5340-12-344-2443
Mounting Bracket

123442443
VG95211-ML-123442443: RNCC: 2 | RNVC: 2
0289 9621: RNCC: 3 | RNVC: 2

7 Oct 1997

5340-12-335-3031
Mounting Bracket

123353031
6700018-201232.00: RNCC: 2 | RNVC: 2
6700018-201232.00: RNCC: 3 | RNVC: 2

8 Aug 1994

5340-12-146-9265
Nonmetallic Bumper

121469265
25704-193110.01.0: RNCC: 2 | RNVC: 2
VG95092B14X5X25X6,5X15NBR60: RNCC: 2 | RNVC: 2
25704-193110.01.0: RNCC: 3 | RNVC: 2
82200-25704-193110.01.0: RNCC: 3 | RNVC: 2
25704-193110-01-0: RNCC: 5 | RNVC: 2
25704-193110-01-0: RNCC: 5 | RNVC: 9
25704-193110.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-386-6309
Locking Shackle

123866309
2500262-193500.001.0: RNCC: 2 | RNVC: 2
2500262-193500.001.0: RNCC: 3 | RNVC: 2

16 Sep 2011

5340-12-354-5641
Access Cover

123545641
4900059-323310.000.0/15: RNCC: 3 | RNVC: 2

3 Aug 2001

5340-12-343-4525
Window Retaining Plate

123434525
975006: RNCC: 3 | RNVC: 2

24 Jun 1997

5340-12-375-5835
Mounting Bracket

123755835
L334M1802102: RNCC: 3 | RNVC: 2

16 Jun 2008

5340-12-366-0010
Mounting Bracket

123660010
0005280130: RNCC: 3 | RNVC: 2

25 Feb 2005

5340-12-368-7835
Dust And Moisture Seal Protective Cover

123687835
027002298: RNCC: 3 | RNVC: 2

19 Apr 2006

5340-12-024-1298

5340-12-133-6265

5340-12-123-1538
Nut And Bolt Locking Plate

121231538
K17601: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-364-2626
Mounting Plate

123642626
4256500037: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-150-8532
Retaining Strap

121508532
8332030072: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-171-4964
Nonmetallic Bumper

121714964
2600036: RNCC: 3 | RNVC: 2

20 Oct 1977

5340-12-368-1688
Nonmetallic Bumper

123681688
245829599: RNCC: 3 | RNVC: 2

23 Dec 2005

5340-12-367-1136
Escutcheon Plate

123671136
53075: RNCC: 3 | RNVC: 2

11 Jul 2005

5340-12-353-7756
Double Angle Bracket

123537756
1AJ0056T01: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-043-7099

5340-12-349-1916
Metal Grille

123491916
9005570 000: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-333-6260
Mounting Plate

123336260
162924602: RNCC: 3 | RNVC: 2
7101-38-09.01: RNCC: 5 | RNVC: 2
7101-38-08-10: RNCC: 5 | RNVC: 9

14 Jan 1994

5340-12-389-8378
Access Cover

123898378
5115-0140: RNCC: 3 | RNVC: 2

29 Aug 2012

5340-12-183-3452
Plain Solid Disk

121833452
V221-29300: RNCC: 3 | RNVC: 2

9 Apr 1980

5340-12-381-2946
Mounting Plate

123812946
424-12-SIB2: RNCC: 3 | RNVC: 2
4250473101155: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-321-2888
Clamping Catch

123212888
FFVUOE-340954: RNCC: 3 | RNVC: 2

27 Apr 1990

5340-12-305-3944
Angle Bracket

123053944
205-030-101-5009: RNCC: 3 | RNVC: 2

31 Oct 1985

5340-12-179-1946
Dust And Moisture Seal Protective Plug

121791946
3819970486: RNCC: 3 | RNVC: 2

15 Jun 1979

5340-12-183-2003
Access Cover

121832003
51916100009: RNCC: 3 | RNVC: 2

25 Mar 1980

5340-12-195-0631
Nonmetallic Bumper

121950631
1000151-275000.10: RNCC: 2 | RNVC: 2
1000151-275000.10: RNCC: 5 | RNVC: 2

10 Jan 1983

5340-12-385-6930
Dust And Moisture Seal Protective Plug

123856930
B8MTN5073: RNCC: 3 | RNVC: 2
735073008100: RNCC: 5 | RNVC: 2

30 Jun 2011

5340-12-123-4001
Retaining Strap

121234001
81974010186: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-348-2757
Retaining Clip

123482757
8909990031: RNCC: 3 | RNVC: 2

20 May 1999

5340-12-329-6800
Mending Plate

123296800
0853 1225.004: RNCC: 3 | RNVC: 2
8531225.004: RNCC: 5 | RNVC: 2

18 Sep 1992

5340-12-381-4429
Angle Bracket

123814429
5240781441: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-12-357-7160
Nonmetallic Bumper

123577160
N535M1004211: RNCC: 3 | RNVC: 2

16 Jul 2002

5340-12-355-3424
Butt Hinge Leaf

123553424
218-9004: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-12-316-7116
Mounting Bracket

123167116
2435703013: RNCC: 3 | RNVC: 2

7 Feb 1989

5340-12-369-8077
Mounting Plate

123698077
5822370040: RNCC: 3 | RNVC: 2

17 Aug 2006

5340-12-377-1980
Bumper

123771980
305901: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-12-358-9695
Angle Bracket

123589695
3833160060: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-358-2406
Dust And Moisture Seal Protective Cap

123582406
596633: RNCC: 3 | RNVC: 2
42536892: RNCC: 5 | RNVC: 2

1 Oct 2002

5340-12-131-5581

5340-12-389-1316
Expansion Shield

123891316
050401: RNCC: 3 | RNVC: 2

30 May 2012

5340-12-362-5337
Nonmetallic Bumper

123625337
4634110097: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-300-2699
Mending Plate

123002699
A11A121110561: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-325-8047
Mounting Bracket

123258047
3962680140: RNCC: 3 | RNVC: 2
3962600362: RNCC: 5 | RNVC: 2

11 Jul 1991

5340-12-365-8630
Handle Grip

123658630
105-41247: RNCC: 3 | RNVC: 2

15 Feb 2005

5340-12-313-3320
Handle Grip

123133320
23182-9507.02: RNCC: 2 | RNVC: 2
23182-9507.02: RNCC: 3 | RNVC: 2

23 Mar 1988

5340-12-310-8711
Mounting Bracket

123108711
502229: RNCC: 3 | RNVC: 2

3 Jul 1987

5340-12-195-2858

5340-12-301-9432
Nonmetallic Bumper

123019432
DIN95364-A50X21-NR70ST: RNCC: 2 | RNVC: 2
811.030.050.021.10X26,5.NR70.ST: RNCC: 5 | RNVC: 2
781093HART: RNCC: 5 | RNVC: 2
1.50.21.4.70NR/ST: RNCC: 5 | RNVC: 2
81130-50X21-M10X26,5.NR70.ST: RNCC: 5 | RNVC: 2
57810930016: RNCC: 5 | RNVC: 2
VG95364-A50X21-NR70ST: RNCC: 5 | RNVC: 9
VG95364A50X21NR70ST: RNCC: 5 | RNVC: 9

20 Nov 1984

5340-12-384-1531
Spring Loaded Cylinder Fastener

123841531
GN613-5-AK: RNCC: 3 | RNVC: 2

27 Jan 2011

5340-12-149-9035
Resilient Mount

121499035
DIN95369-A4-1-CR-ST: RNCC: 2 | RNVC: 2
151007-M12-CR.ST-40: RNCC: 5 | RNVC: 2
60-201-040: RNCC: 5 | RNVC: 2
C2020G: RNCC: 5 | RNVC: 2
VG95369-A4-1-CR-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-4321
Angle Bracket

123014321
P-855216-003: RNCC: 3 | RNVC: 2
P855216-003: RNCC: 5 | RNVC: 2

13 Oct 1984

5340-12-302-2337
Flush Lock

123022337
NO PRIMARY REF 12-302-2337: RNCC: 3 | RNVC: 2
825827573: RNCC: 5 | RNVC: 2
M/5970/0/4: RNCC: 5 | RNVC: 9

11 Dec 1984

5340-12-382-5247
Handwheel

123825247
VG85080-A-125X11-RG5: RNCC: 2 | RNVC: 2

1 Jul 2010

5340-12-339-1678
Spacing Threaded Standoff

123391678
AWN10-M4X60-AL/C: RNCC: 3 | RNVC: 2
AWN10-M4X60-AL/C: RNCC: 3 | RNVC: 2
VG95148B11XM4X60-AL-CHR: RNCC: 5 | RNVC: 2
AWN10-M4X60-AL/C: RNCC: 5 | RNVC: 9
M4X60 AWN10-AL CHR: RNCC: 5 | RNVC: 9

20 Oct 1995

5340-12-389-5725
Loop Clamp

123895725
535-PP-DP-AS-M-W3: RNCC: 3 | RNVC: 2
FH180-1014-228N: RNCC: 5 | RNVC: 2
535-PP-DP-AS-M-W3: RNCC: 5 | RNVC: 2

23 Jul 2012

5340-12-354-9008
Mounting Bracket

123549008
V6515-00025-101: RNCC: 2 | RNVC: 2
V6516-00025-101: RNCC: 3 | RNVC: 2

4 Sep 2001

5340-12-184-2524
Angle Bracket

121842524
5801352-1300.25: RNCC: 2 | RNVC: 2
5801352-1300.25: RNCC: 3 | RNVC: 2
5801352-1300-25: RNCC: 5 | RNVC: 2
5801352-1300-25: RNCC: 5 | RNVC: 9
5801352-1300-25: RNCC: 5 | RNVC: 9

10 Jul 1980

5340-12-190-9268
Angle Bracket

121909268
V22.498.754-01: RNCC: 3 | RNVC: 2
V22-498-754-01: RNCC: 5 | RNVC: 9

23 Dec 1981

5340-12-387-9332
Angle Bracket

123879332
260B000504: RNCC: 3 | RNVC: 2
003993: RNCC: 5 | RNVC: 2

9 Feb 2012

5340-12-043-8750

5340-12-152-3541
An Scharnierlappen

5340-12-134-4792

5340-12-309-3682
Access Cover

123093682
5802017-708400.08: RNCC: 2 | RNVC: 2
5802017-708400.08: RNCC: 3 | RNVC: 2
5802017-708400.08: RNCC: 5 | RNVC: 9
5802017-708400.08: RNCC: 5 | RNVC: 9

19 Jan 1987

5340-12-382-2406
Clamping Catch

123822406
1429L02-3X1BP: RNCC: 3 | RNVC: 2

26 May 2010

5340-12-174-5776
Access Cover

121745776
57942: RNCC: 3 | RNVC: 2

13 Jul 1978

5340-12-381-7236
Mounting Bracket

123817236
02996133: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-12-316-7325
Angle Bracket

123167325
51-51672: RNCC: 3 | RNVC: 2

8 Feb 1989

5340-12-025-5924

5340-12-125-0089

5340-12-042-4647

5340-12-313-4631
Butt Hinge Leaf

123134631
2300279-9715.01: RNCC: 2 | RNVC: 2
2300279-9715.01: RNCC: 3 | RNVC: 2
2300279-9715.01: RNCC: 5 | RNVC: 9
9871605: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-300-2089
Friction Catch

123002089
244.01.901: RNCC: 3 | RNVC: 2

14 Jul 1984

5340-12-144-4317
Sicherheits Schlosz

121444317
600A246: RNCC: 3 | RNVC: 2
7101-15-04.10: RNCC: 5 | RNVC: 2
600K0018: RNCC: 5 | RNVC: 2
161224801: RNCC: 5 | RNVC: 2
7101-15-04-10: RNCC: 5 | RNVC: 2
7101-15-04-10: RNCC: 5 | RNVC: 9
7101-15-04.10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-387-0614
Access Cover

123870614
2300194-181520.000: RNCC: 2 | RNVC: 2
2300194-181520.000: RNCC: 3 | RNVC: 2
2300194-181520.000: RNCC: 5 | RNVC: 9

2 Nov 2011

5340-12-342-9315
Pipe Hanger

123429315
5084-235: RNCC: 3 | RNVC: 2

16 Apr 1997

5340-12-326-9178
Electrical-Mechanical Equipment Post

123269178
279.823 021: RNCC: 3 | RNVC: 2
1392152-350000.011: RNCC: 5 | RNVC: 9
279.823 021: RNCC: 5 | RNVC: 9

8 Nov 1991

5340-12-189-3062
Webbing Strap

121893062
2500125-132000.00: RNCC: 2 | RNVC: 2
2500125-132000.00: RNCC: 3 | RNVC: 2
2500125-132000.00: RNCC: 3 | RNVC: 2
2500125-132000-00: RNCC: 5 | RNVC: 2
2500125-132000.00: RNCC: 5 | RNVC: 2
2500125-132000.00: RNCC: 5 | RNVC: 9
2500125-132000-00: RNCC: 5 | RNVC: 9
2500125-132000.00: RNCC: 5 | RNVC: 9
2500125-132000.00: RNCC: 5 | RNVC: 9

17 Sep 1981

5340-12-308-7435
Mending Plate

123087435
1281-12100.13: RNCC: 2 | RNVC: 2
159138: RNCC: 3 | RNVC: 2
1281-12100.13: RNCC: 5 | RNVC: 2

13 Nov 1986

5340-12-192-3301
Flush Lock

121923301
00.026.000: RNCC: 3 | RNVC: 2
0004629330: RNCC: 5 | RNVC: 2

15 Apr 1982

5340-12-381-9783
Pipe Hanger

123819783
0181 6025 140: RNCC: 3 | RNVC: 2

22 Apr 2010

5340-12-382-4434
Mounting Bracket

123824434
T15105: RNCC: 3 | RNVC: 2

23 Jun 2010

5340-12-323-3728
Angle Bracket

123233728
1421389003: RNCC: 3 | RNVC: 2
0000740540: RNCC: 5 | RNVC: 2

20 Nov 1990

5340-12-302-8577
Mending Plate

123028577
2300061-291190.018: RNCC: 2 | RNVC: 2
2300061-291190.018: RNCC: 3 | RNVC: 2
2300061-291190.018: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-172-1346
Rim Lock

121721346
3227Z: RNCC: 3 | RNVC: 2

22 Dec 1977

5340-12-304-5414
Helical Compression Spring Seat

123045414
4212670085: RNCC: 3 | RNVC: 2

29 Jul 1985

5340-12-359-7314
Access Cover

123597314
S281M2027205: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-318-0709
Nonmetallic Solid Wheel

123180709
81796010001: RNCC: 3 | RNVC: 2
81.79601.0001: RNCC: 5 | RNVC: 2

8 Jun 1989

5340-12-197-0458
Angle Bracket

121970458
42023829: RNCC: 3 | RNVC: 2
42023829ED5035-71: RNCC: 5 | RNVC: 2

13 Sep 1983

5340-12-130-8715

5340-12-314-1895
Nonmetallic Bumper

123141895
191721342: RNCC: 3 | RNVC: 9

15 Jun 1988

5340-12-305-6712
Metal Runner

123056712
502024: RNCC: 3 | RNVC: 2
502024: RNCC: 3 | RNVC: 2

3 Dec 1985

5340-12-390-2833
Rim Lock

123902833
920.730: RNCC: 3 | RNVC: 2
920.730: RNCC: 5 | RNVC: 2

25 Oct 2012

5340-12-331-2824
Retaining Strap

123312824
153 200 13: RNCC: 3 | RNVC: 2
15320013: RNCC: 5 | RNVC: 2

15 Apr 1993

5340-12-388-2109
Retaining Band

123882109
5111420445: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-12-316-8292
Angle Bracket

123168292
2300279-5000.57: RNCC: 2 | RNVC: 2
2300279-5000.57: RNCC: 3 | RNVC: 2
2300279-5000.57: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-311-2263
Helical Compression Spring Seat

123112263
AGS50809: RNCC: 3 | RNVC: 2

6 Aug 1987

5340-12-128-3685

5340-12-357-9161
Cushioning Pad

123579161
2300042-255161.002: RNCC: 2 | RNVC: 2
2300042-255161.002: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-193-4300
Loop Clamp

121934300
LN9491BM50: RNCC: 2 | RNVC: 2

21 Jul 1982

5340-12-360-0746
Butt Hinge

123600746
9417200337: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-12-378-3829
Manual Control Lever

123783829
0501 212 763: RNCC: 3 | RNVC: 2
003255: RNCC: 5 | RNVC: 2
003255: RNCC: 5 | RNVC: 2
5340PL0619346: RNCC: 6 | RNVC: 9
10098709: RNCC: 6 | RNVC: 9

1 Apr 2009

5340-12-323-1659
Spring Tension Clip

123231659
1262710394: RNCC: 3 | RNVC: 2

30 Oct 1990

5340-12-195-4089
Escutcheon Plate

121954089
6644WCR AL: RNCC: 3 | RNVC: 2

21 Feb 1983

5340-12-319-8242
Mending Plate

123198242
5802006-665000.02: RNCC: 2 | RNVC: 2
5802006-665000.02: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-12-352-6345
Mounting Bracket

123526345
1221 2066: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-312-0910
Angle Bracket

123120910
P-295489-007: RNCC: 3 | RNVC: 2
P295489-007: RNCC: 5 | RNVC: 2

19 Nov 1987

5340-12-371-9043
Clamping Catch

123719043
95L01-1-1AB: RNCC: 3 | RNVC: 2

29 May 2007

5340-12-702-5372
Mounting Plate

127025372
VG95211-ML-127025372: RNCC: 2 | RNVC: 2
5.51.7204.0851.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-189-0593
Detent Plunger

121890593
2500075-321640.03.0: RNCC: 2 | RNVC: 2
2500075-321640.03.0: RNCC: 3 | RNVC: 2
2500075-321640-03-0: RNCC: 5 | RNVC: 9
2500075-321640.03.0: RNCC: 5 | RNVC: 9
2500075-321640-03-0: RNCC: 5 | RNVC: 9

24 Aug 1981

5340-12-368-2346
Snap Hook

123682346
VG85266-B-0,32-NM: RNCC: 2 | RNVC: 2
VG85266B0,32: RNCC: 5 | RNVC: 9

12 Jan 2006

5340-12-333-8840
Mounting Bracket

123338840
406-1-4: RNCC: 3 | RNVC: 2
406-1.4: RNCC: 5 | RNVC: 2

21 Feb 1994

5340-12-307-5842
Angle Bracket

123075842
P-244539-754: RNCC: 3 | RNVC: 2
P244539-754: RNCC: 5 | RNVC: 2

4 Jul 1986

5340-12-357-8893
Mounting Plate

123578893
12227201: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-12-170-2290
Mending Plate

121702290
JJ42330: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-357-2547
Shimmy Damper

123572547
5581800: RNCC: 3 | RNVC: 2

27 May 2002

5340-12-306-6679
Expansion Shield

123066679
SLM8N: RNCC: 3 | RNVC: 2
50521: RNCC: 3 | RNVC: 9

19 Mar 1986

5340-12-364-2482
Mounting Bracket

123642482
4257501214: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-366-9734
Mounting Bracket

123669734
3573530173: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-334-6582
Mounting Bracket

123346582
15 0004 487: RNCC: 3 | RNVC: 2

7 Jun 1994

5340-12-357-7628
Webbing Strap

123577628
909143804: RNCC: 2 | RNVC: 2
909143804: RNCC: 3 | RNVC: 2

19 Jul 2002

5340-12-044-3476

5340-12-127-8043

5340-12-314-4322
Angle Bracket

123144322
6245240340: RNCC: 3 | RNVC: 2
624 524 03 40: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-312-3790
Angle Bracket

123123790
100000544: RNCC: 2 | RNVC: 2
100000544: RNCC: 3 | RNVC: 2

22 Dec 1987

5340-12-331-4738
Resilient Mount

123314738
6706820069: RNCC: 3 | RNVC: 9

7 May 1993

5340-12-348-9279
Rod End Clevis

123489279
300790: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-12-344-4243
Mounting Bracket

123444243
A-616832-001: RNCC: 3 | RNVC: 2
A616832-001: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-701-2731
Retaining Bail

127012731
VG95211-ML-127012731: RNCC: 2 | RNVC: 2
5.12.4806.1580.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-368-7900
Access Cover

123687900
2300109-182300.000.0: RNCC: 2 | RNVC: 2
2300109-182300.000.0: RNCC: 3 | RNVC: 2
1288703: RNCC: 5 | RNVC: 9

20 Apr 2006

5340-12-185-1834
Loop Clamp

121851834
Q 314 292 202: RNCC: 3 | RNVC: 2
CN 400 299: RNCC: 3 | RNVC: 2
Q 314 292 202: RNCC: 3 | RNVC: 2
CN 400 299: RNCC: 3 | RNVC: 2
ZN314-292-202: RNCC: 5 | RNVC: 2
Q314292202: RNCC: 5 | RNVC: 2
ZN314-292-202: RNCC: 5 | RNVC: 2
59.91.012.A: RNCC: 5 | RNVC: 2
Q314292202: RNCC: 5 | RNVC: 2

18 Sep 1980

5340-12-394-1460
Loop Clamp

123941460
RS2.55/15-W1: RNCC: 3 | RNVC: 2
034165: RNCC: 5 | RNVC: 2

7 Nov 2013

5340-12-313-3011
Loop Clamp

123133011
SP86/12SZ: RNCC: 3 | RNVC: 2
01310005086: RNCC: 5 | RNVC: 2
1310005086: RNCC: 5 | RNVC: 2
SP86/12ZY: RNCC: 5 | RNVC: 9

19 Mar 1988

5340-12-341-2813
Access Cover

123412813
305301-01: RNCC: 3 | RNVC: 2
KITCONDENSEUR.K032NB.FLASQ+JOINT: RNCC: 5 | RNVC: 2

17 Aug 1996

5340-12-348-0345
Turnbuckle Body

123480345
PAN4512A01-0207: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-12-701-7390
Loop Clamp

127017390
VG95211-ML-127017390: RNCC: 2 | RNVC: 2
5.12.7611.0031.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-302-7858
Case Corner

123027858
CF 482 209: RNCC: 3 | RNVC: 2
CF 482 209: RNCC: 5 | RNVC: 2

30 Jan 1985

5340-12-190-8750
Helical Compression Spring Seat

121908750
2410320051: RNCC: 3 | RNVC: 2
8690740051: RNCC: 5 | RNVC: 2

21 Dec 1981

5340-12-329-4345
Nonmetallic Bumper

123294345
8530230.074: RNCC: 3 | RNVC: 2
0853 0230.074: RNCC: 3 | RNVC: 2

19 Aug 1992

5340-12-331-9028
Mounting Bracket

123319028
1757202: RNCC: 3 | RNVC: 2

5 Jul 1993

5340-12-139-8432
Dust And Moisture Seal Protective Plug

121398432
22420102504: RNCC: 3 | RNVC: 2
0001106: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-024-2011

5340-12-350-8192
Mounting Bracket

123508192
4139 301 394: RNCC: 3 | RNVC: 2
4139301394: RNCC: 5 | RNVC: 2

25 May 2000

5340-12-330-3325
Angle Bracket

123303325
06590003: RNCC: 3 | RNVC: 2
101102: RNCC: 5 | RNVC: 9

3 Dec 1992

5340-12-043-3586

5340-12-340-2644
Nonmetallic Bumper

123402644
9525815: RNCC: 2 | RNVC: 2
9525815: RNCC: 3 | RNVC: 2

20 Mar 1996

5340-12-317-9766
Resilient Mount

123179766
742311BL2: RNCC: 3 | RNVC: 2
81.96210.0242: RNCC: 5 | RNVC: 2
81962100242: RNCC: 5 | RNVC: 2

31 May 1989

5340-12-316-6477
Mending Plate

123166477
5184875: RNCC: 3 | RNVC: 2

31 Jan 1989

5340-12-316-2917
Helical Compression Spring Retainer

123162917
6380500: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-312-9071
Mending Plate

123129071
1070665: RNCC: 2 | RNVC: 2
1070665: RNCC: 3 | RNVC: 2

18 Feb 1988

5340-12-350-4894
Angle Bracket

123504894
10063-710000.17: RNCC: 3 | RNVC: 2
10063-710000.17: RNCC: 5 | RNVC: 9

5 Apr 2000

5340-12-316-9663
Access Cover

123169663
3602510004: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-316-1906
Rod End Clevis

123161906
4602801231: RNCC: 3 | RNVC: 2

30 Dec 1988

5340-12-334-7013
Double Angle Bracket

123347013
4014 003 054: RNCC: 3 | RNVC: 2

10 Jun 1994

5340-12-352-7018
Catch Strike

123527018
030126: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-12-352-7142
Access Cover

123527142
64416364: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-169-2493
Retaining Band

121692493
T21305: RNCC: 3 | RNVC: 2
T21305: RNCC: 5 | RNVC: 9

27 Apr 1977

5340-12-381-9088
Spring Loaded Cylinder Fastener

123819088
000605-204600.00: RNCC: 2 | RNVC: 2

16 Apr 2010

5340-12-329-6720
Lock-Release Lever

123296720
GN6337.3-28-M10-N: RNCC: 3 | RNVC: 2

17 Sep 1992

5340-12-360-4015
Loop Clamp

123604015
DIN3015-LB-K2G-16-PA-W1: RNCC: 2 | RNVC: 2
RAN 2-2 5/8: RNCC: 3 | RNVC: 2
RAN2-216: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-379-6413
Dust And Moisture Seal Protective Cap

123796413
0237046500: RNCC: 3 | RNVC: 2

18 Aug 2009

5340-12-366-5371
Spacing Threaded Standoff

123665371
S435M2072211: RNCC: 3 | RNVC: 2

4 May 2005

5340-12-136-5767

5340-12-010-9583

5340-12-313-3384
Mounting Bracket

123133384
2300194-181550.000: RNCC: 3 | RNVC: 2
2300194-181550.000: RNCC: 5 | RNVC: 9
9843616: RNCC: 5 | RNVC: 9
2300194-181550.000: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-341-1508
Angle Bracket

123411508
P-297201-457: RNCC: 3 | RNVC: 2
P297201-457: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-12-161-4106
Retaining Strap

121614106
914-4N: RNCC: 3 | RNVC: 2
0047-814: RNCC: 5 | RNVC: 2
0047814: RNCC: 5 | RNVC: 2
8441986: RNCC: 5 | RNVC: 2
914-4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-153-3242
Double Angle Bracket

121533242
C22166-A20-C37: RNCC: 3 | RNVC: 2
C22166A20C37: RNCC: 5 | RNVC: 2
5800633-34.1: RNCC: 5 | RNVC: 2
5800633-34-1: RNCC: 5 | RNVC: 9
5800633-34-1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-2836
Access Cover

123282836
6024.5075.00: RNCC: 3 | RNVC: 2
6024507500: RNCC: 5 | RNVC: 2

1 May 1992

5340-12-393-8195
Manual Control Lever

123938195
A60-0017: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-12-338-1334
Access Cover

123381334
160-75855: RNCC: 3 | RNVC: 2
15160-75855: RNCC: 5 | RNVC: 2
160-75855: RNCC: 5 | RNVC: 9

29 May 1995

5340-12-328-2183
Mending Plate

123282183
SK2504-18: RNCC: 3 | RNVC: 2
2490557: RNCC: 3 | RNVC: 2
SK2504-18: RNCC: 5 | RNVC: 2
5000821601: RNCC: 5 | RNVC: 2

23 Apr 1992

5340-12-319-0802
Dust And Moisture Seal Protective Cap

123190802
S21-4.01: RNCC: 3 | RNVC: 2
TN01102: RNCC: 3 | RNVC: 2
01102: RNCC: 5 | RNVC: 2

5 Sep 1989

5340-12-701-3490
Mounting Bracket

127013490
VG95211-ML-127013490: RNCC: 2 | RNVC: 2
5.12.5111.3821.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-382-3331
Clamping Catch

123823331
3105332: RNCC: 3 | RNVC: 2

8 Jun 2010

5340-12-181-9089
Rubber Bumper

121819089
1219870339: RNCC: 3 | RNVC: 9

21 Dec 1979

5340-12-335-4932
Mending Plate

123354932
1121-83971.06: RNCC: 3 | RNVC: 2

23 Aug 1994

5340-12-176-1563
Loop Clamp

121761563
PAN4231B1717: RNCC: 3 | RNVC: 2

9 Nov 1978

5340-12-199-2893
Electrical-Mechanical Equipment Post

121992893
0801-5300: RNCC: 3 | RNVC: 2

10 Apr 1984

5340-12-703-2067
Mounting Bracket

127032067
VG95211-ML-127032067: RNCC: 2 | RNVC: 2
5.12.5313.8008.98: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-375-8680
Pad Eye

123758680
82439005003: RNCC: 3 | RNVC: 2
82.43900-5003: RNCC: 5 | RNVC: 2

15 Jul 2008

5340-12-386-1016
Angle Bracket

123861016
G624058: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-12-316-2403
Nonmetallic Bumper

123162403
90108055: RNCC: 3 | RNVC: 2
852716: RNCC: 5 | RNVC: 2

3 Jan 1989

5340-12-349-6096
Angle Bracket

123496096
2760.1120: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-173-4499
Expansion Shield

121734499
FA16/20-1: RNCC: 3 | RNVC: 2
50224: RNCC: 5 | RNVC: 2
FA16-20-1: RNCC: 5 | RNVC: 2
FA16/20: RNCC: 5 | RNVC: 2
2502241: RNCC: 5 | RNVC: 9

14 Apr 1978

5340-12-171-5136
Angle Bracket

121715136
81255400270: RNCC: 3 | RNVC: 2
81.25540-0270: RNCC: 5 | RNVC: 2
23230-062107-003-0: RNCC: 5 | RNVC: 9
23230-062107.003.0: RNCC: 5 | RNVC: 9

20 Oct 1977

5340-12-386-6860
Helical Compression Spring Seat

123866860
5841870051: RNCC: 3 | RNVC: 2

22 Sep 2011

5340-12-346-1158
Access Cover

123461158
272.337.141.GZ: RNCC: 3 | RNVC: 2
272.337 141 ST: RNCC: 5 | RNVC: 9

15 Jun 1998

5340-12-701-9664
Angle Bracket

127019664
VG95211-ML-127019664: RNCC: 2 | RNVC: 2
01.7100.8210: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-198-4033
Mending Plate

121984033
4000000 02222: RNCC: 3 | RNVC: 2
4000000-02222: RNCC: 5 | RNVC: 2

25 Jan 1984

5340-12-393-6871
Mounting Plate

123936871
11.44144-0038: RNCC: 3 | RNVC: 2
11.44144-0038: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-12-378-3929
Dust And Moisture Seal Protective Plug

123783929
J53227076-001: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-386-7454
Dust And Moisture Seal Protective Cap

123867454
170485: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-12-351-5181
Dust And Moisture Seal Protective Plug

123515181
310250101520: RNCC: 3 | RNVC: 2
08002883: RNCC: 5 | RNVC: 2

1 Aug 2000

5340-12-091-0478

5340-12-334-7625
Mending Plate

123347625
52.3109.535.11: RNCC: 3 | RNVC: 2

17 Jun 1994

5340-12-184-9973
Flush Bolt

121849973
CF466774AR: RNCC: 3 | RNVC: 2
CF 466 774 AR: RNCC: 5 | RNVC: 2
CF466774AR: RNCC: 5 | RNVC: 2
CF 466 774 AR: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-12-313-6823
Electrical-Mechanical Equipment Post

123136823
3512 712 36482: RNCC: 3 | RNVC: 2

26 Apr 1988

5340-12-316-5980
Access Door

123165980
3058271: RNCC: 3 | RNVC: 2

27 Jan 1989

5340-12-300-7352
Catch Strike

123007352
3097430303: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-379-0289
Webbing Strap

123790289
2452-60200: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-12-388-4488
Section Block Clamp

123884488
5849953868: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-393-7710
Angle Bracket

123937710
1103378: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-352-2664
Strap Hinge

123522664
348.71.513: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-12-355-9921
Dust And Moisture Seal Protective Plug

123559921
86205: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-12-151-3952
Retaining Strap

121513952
PLATTE412: RNCC: 3 | RNVC: 2
MB471-42: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-344-9108
Kunst Gleitschiene

123449108
U15.151000.03-00: RNCC: 3 | RNVC: 2

12 Jan 1998

5340-12-700-8614
Mounting Bracket

127008614
VG95211-ML-127008614: RNCC: 2 | RNVC: 2
155N1262-1: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-308-8692
Mending Plate

123088692
490499102: RNCC: 3 | RNVC: 2
490.4991.02: RNCC: 5 | RNVC: 2

25 Nov 1986

5340-12-317-6648
Dust And Moisture Seal Protective Cap

123176648
4608690172: RNCC: 3 | RNVC: 2

26 Apr 1989

5340-12-041-6980

5340-12-393-5453
Angle Bracket

123935453
L258M2003101: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-12-308-8800
Electrical-Mechanical Equipment Post

123088800
SK143412: RNCC: 3 | RNVC: 2

25 Nov 1986

5340-12-329-5954
Webbing Strap

123295954
4600002-103110.00: RNCC: 2 | RNVC: 2
4600002-103110.00: RNCC: 3 | RNVC: 2
000-D7-25X2,0X400-PE-RAL6031: RNCC: 6 | RNVC: 9

5 Sep 1992

5340-12-376-4351
Mounting Plate

123764351
81424036079: RNCC: 3 | RNVC: 2
81.42403-6079: RNCC: 5 | RNVC: 2

30 Sep 2008

5340-12-181-2552
Mounting Bracket

121812552
2000-4721-00: RNCC: 3 | RNVC: 2

7 Nov 1979

5340-12-195-1999
Dust And Moisture Seal Protective Cap

121951999
025-0478-000: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-12-157-4521
Retaining Strap

121574521
5LV3821.002-67: RNCC: 3 | RNVC: 2
5LV3821-002-67: RNCC: 5 | RNVC: 2
009002: RNCC: 5 | RNVC: 2
30507: RNCC: 5 | RNVC: 2
5L3821-002-67: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-156-5496
Spring Tension Clip

121565496
42161-27600.07: RNCC: 3 | RNVC: 2
42161-27600-07: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-190-2837
Angle Bracket

121902837
102590: RNCC: 3 | RNVC: 2

17 Nov 1981

5340-12-388-3490
Mechanical Stop

123883490
865344341: RNCC: 2 | RNVC: 2
865344341: RNCC: 3 | RNVC: 2

14 Mar 2012

5340-12-182-3133
Manual Control Handle

121823133
5801215-883: RNCC: 3 | RNVC: 2

25 Jan 1980

5340-12-354-8624
Access Cover

123548624
808800701: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-352-7129
Access Cover

123527129
64416347: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-345-4686
Nut And Bolt Locking Plate

123454686
13731024: RNCC: 3 | RNVC: 2

20 Mar 1998

5340-12-335-5955
Mounting Plate

123355955
702-260021-904-0: RNCC: 3 | RNVC: 2

5 Sep 1994

5340-12-354-5635
Angle Bracket

123545635
S42162-01-6-229: RNCC: 3 | RNVC: 2

3 Aug 2001

5340-12-701-2120
Mounting Bracket

127012120
VG95211-ML-127012120: RNCC: 2 | RNVC: 2
5.12.0604.1140.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5401
Mounting Bracket

127025401
VG95211-ML-127025401: RNCC: 2 | RNVC: 2
5.51.7204.1920.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-369-0173
Adapter

123690173
2500238-162922.000.0: RNCC: 2 | RNVC: 2
2500238-162922.000.0: RNCC: 3 | RNVC: 2

15 May 2006

5340-12-332-1733
Loop Clamp

123321733
9108510002: RNCC: 3 | RNVC: 2
467-371/0851-09-00-00: RNCC: 5 | RNVC: 2

23 Jul 1993

5340-12-701-4776
Mounting Bracket

127014776
VG95211-ML-127014776: RNCC: 2 | RNVC: 2
5.12.5811.1220.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-5602
Mounting Plate

127015602
VG95211-ML-127015602: RNCC: 2 | RNVC: 2
5.12.6114.0121.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-6696
Swivel Caster

123616696
BH-GTH-125K-1: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-145-7448
Loop Clamp

121457448
VG95211-ML-121457448: RNCC: 2 | RNVC: 2
A10-75-598-00-0: RNCC: 3 | RNVC: 2
A10-75-598-00-0: RNCC: 5 | RNVC: 2
A10-75-598-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-195-4278
Dust And Moisture Seal Protective Cap

121954278
722519: RNCC: 3 | RNVC: 9

24 Feb 1983

5340-12-389-5620
Spring Holder

123895620
0040172252: RNCC: 3 | RNVC: 2

20 Jul 2012

5340-12-356-0795
Manual Control Handle

123560795
1239190160: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-12-135-6532

5340-12-157-7915
Retaining Clip

121577915
147793001: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-305-3591
Escutcheon Plate

123053591
CF 429 214: RNCC: 3 | RNVC: 2
CF 429 214: RNCC: 5 | RNVC: 2

25 Oct 1985

5340-12-393-5074
Angle Bracket

123935074
4375430140: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-171-4353
Bow Handle

121714353
10663: RNCC: 3 | RNVC: 2
10663B: RNCC: 5 | RNVC: 2

13 Oct 1977

5340-12-393-2965
Mounting Plate

123932965
800020: RNCC: 3 | RNVC: 2
068: RNCC: 5 | RNVC: 2

5 Sep 2013

5340-12-393-9969
Helical Compression Spring Seat

123939969
F1.4553-30-01-20.00-14: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-12-343-8934
Resilient Mount

123438934
17-1550-21: RNCC: 3 | RNVC: 2
1227 9870: RNCC: 5 | RNVC: 2
1227-9870: RNCC: 5 | RNVC: 2
7000741: RNCC: 5 | RNVC: 2

12 Aug 1997

5340-12-197-7449
Metal Runner

121977449
6600118-139100.00: RNCC: 3 | RNVC: 2
6600118-139100.00: RNCC: 5 | RNVC: 9

21 Nov 1983

5340-12-120-8054
Retaining Strap

121208054
DIN72571-1X10-ST-GESCHWAERZT: RNCC: 2 | RNVC: 2
DIN72571-1X10-ST-GESCHWAERZT: RNCC: 3 | RNVC: 2
66380: RNCC: 5 | RNVC: 2
1X10DIN72571STGESCHWAERZT: RNCC: 5 | RNVC: 2
5730057: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-027-1017

5340-12-177-0593
Access Cover

121770593
5903194: RNCC: 3 | RNVC: 2

12 Jan 1979

5340-12-177-0544
Plain Solid Disk

121770544
51910010008: RNCC: 3 | RNVC: 2

9 Jan 1979

5340-12-348-1555
Buckle

123481555
407.458: RNCC: 3 | RNVC: 2

23 Apr 1999

5340-12-309-7768
Mending Plate

123097768
6126582: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-194-7325
Ball Socket Seat

121947325
148724: RNCC: 3 | RNVC: 2
148 724: RNCC: 5 | RNVC: 2

1 Dec 1982

5340-12-122-2755
Retaining Strap

121222755
3120780185: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-180-3594
Dust And Moisture Seal Protective Plug

121803594
049109291A: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-12-170-1148
Angle Bracket

121701148
81974860229: RNCC: 3 | RNVC: 2

27 Jun 1977

5340-12-177-4324
Resilient Mount

121774324
0019873140: RNCC: 3 | RNVC: 2
781171MITTEL: RNCC: 3 | RNVC: 2
57811710015: RNCC: 5 | RNVC: 2
0019873140: RNCC: 5 | RNVC: 2
781171S60MITTEL: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-130-1133

5340-12-138-5486
Retaining Clip

121385486
C20136-A4-C679: RNCC: 3 | RNVC: 2
C20136A4C679: RNCC: 5 | RNVC: 2
TDRUCK4T679: RNCC: 5 | RNVC: 9
TFS72-53679: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-5848
Access Cover

123215848
SK400-060055.001.0: RNCC: 2 | RNVC: 2
SK400-060055.001.0: RNCC: 3 | RNVC: 2

5 Jun 1990

5340-12-390-0794
Mounting Plate

123900794
DF 413 607 AE: RNCC: 3 | RNVC: 2
DF 413 607 AE: RNCC: 5 | RNVC: 2

1 Oct 2012

5340-12-092-2649

5340-12-308-5745
Dust And Moisture Seal Protective Cap

123085745
01TC34843: RNCC: 3 | RNVC: 2

24 Oct 1986

5340-12-328-6747
Filler Opening Cap

123286747
701611349: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-042-6424

5340-12-300-8456
Mending Plate

123008456
4255221540: RNCC: 3 | RNVC: 2
A4255221540: RNCC: 5 | RNVC: 2

4 Sep 1984

5340-12-386-0934
Expansion Shield

123860934
NO PRIMARY REF 12-386-0934: RNCC: 3 | RNVC: 2
O50242: RNCC: 5 | RNVC: 2
2500601556: RNCC: 5 | RNVC: 2
050242: RNCC: 5 | RNVC: 2

8 Aug 2011

5340-12-304-5180
Metal Runner

123045180
46 521-001: RNCC: 2 | RNVC: 2
46521-001: RNCC: 3 | RNVC: 2
46 521-001: RNCC: 5 | RNVC: 9

26 Jul 1985

5340-12-330-3602
Door Holder

123303602
6030048 UND 6030006: RNCC: 3 | RNVC: 2
252-200: RNCC: 5 | RNVC: 9

5 Dec 1992

5340-12-363-9855
Dust And Moisture Seal Boot

123639855
GSC-15-80497-00: RNCC: 3 | RNVC: 2

10 Aug 2004

5340-12-385-6878
Mechanical Stop

123856878
F1.1692-50-20-00.00-16: RNCC: 3 | RNVC: 2

30 Jun 2011

5340-12-094-4301

5340-12-310-2992
Double Angle Bracket

123102992
5801758-5910.02: RNCC: 2 | RNVC: 2
5801758-5910.02: RNCC: 3 | RNVC: 2

7 May 1987

5340-12-145-1944

5340-12-197-5901
Retaining Strap

121975901
BSS12X25X3: RNCC: 3 | RNVC: 2
1920896: RNCC: 5 | RNVC: 2
8414219: RNCC: 5 | RNVC: 2
5310000012: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-303-2224
Mending Plate

123032224
119 140BW: RNCC: 3 | RNVC: 2

7 Mar 1985

5340-12-386-9592
Dust And Moisture Seal Protective Plug

123869592
06510290: RNCC: 3 | RNVC: 2
CV190618: RNCC: 5 | RNVC: 2
06510290: RNCC: 5 | RNVC: 2

20 Oct 2011

5340-12-156-9593
Angle Bracket

121569593
294041100800: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-378-6103
Self-Locking Insert

123786103
000020300: RNCC: 3 | RNVC: 2

24 Apr 2009

5340-12-374-4859
Dust And Moisture Seal Protective Plug

123744859
1014-1033: RNCC: 3 | RNVC: 2
079224550: RNCC: 5 | RNVC: 2

21 Feb 2008

5340-12-303-5378
Retaining Clip

123035378
7820403704: RNCC: 3 | RNVC: 2
78204 03704: RNCC: 5 | RNVC: 2

2 Apr 1985

5340-12-360-3506
Retaining Band

123603506
0009300119: RNCC: 3 | RNVC: 2
0009300119: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-199-5369
Retaining Strap

121995369
0951071200: RNCC: 3 | RNVC: 2

9 May 1984

5340-12-360-1287
Spacing Threaded Standoff

123601287
9423170274: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-701-2530
Mounting Plate

127012530
VG95211-ML-127012530: RNCC: 2 | RNVC: 2
5.12.4002.0220.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-382-8163
Loop Clamp

123828163
DIN3016-1-D1-22X20-W5-CR: RNCC: 2 | RNVC: 2

12 Aug 2010

5340-12-388-7432
Retaining Band

123887432
2300559-040100.006.0: RNCC: 2 | RNVC: 2
2300559-040100.006.0: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-12-307-7151
Mending Plate

123077151
2300061-291120.002: RNCC: 2 | RNVC: 2
1218 9890: RNCC: 3 | RNVC: 2
2300061-291120.002: RNCC: 5 | RNVC: 9
12189890: RNCC: 5 | RNVC: 9
6-226-9-637-097-4: RNCC: 5 | RNVC: 9
6.226.9.637.097.4: RNCC: 5 | RNVC: 9

18 Jul 1986

5340-12-701-3965
Mounting Bracket

127013965
VG95211-ML-127013965: RNCC: 2 | RNVC: 2
5.12.5311.2760.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-174-2290
Access Cover

121742290
7881175: RNCC: 3 | RNVC: 2
7881-175: RNCC: 5 | RNVC: 2
1000025-533000-06: RNCC: 5 | RNVC: 9
1000025-533000.06: RNCC: 5 | RNVC: 9

15 Jun 1978

5340-12-379-1674
Doorstop

123791674
2500262-191640.010.0: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-12-343-3799
Webbing Strap

123433799
510241-10: RNCC: 3 | RNVC: 2
1631604: RNCC: 5 | RNVC: 2
631604: RNCC: 5 | RNVC: 9

12 Jun 1997

5340-12-172-8144
Loop Clamp

121728144
LN9490BK25: RNCC: 2 | RNVC: 2

22 Feb 1978

5340-12-328-2838
Metallic Bumper

123282838
6031.1559: RNCC: 3 | RNVC: 2
60311559: RNCC: 5 | RNVC: 2

1 May 1992

5340-12-302-0836
Nonmetallic Bumper

123020836
3878910072: RNCC: 3 | RNVC: 2

30 Nov 1984

5340-12-198-5403
Angle Bracket

121985403
4604924841: RNCC: 3 | RNVC: 2

8 Feb 1984

5340-12-357-0249
Shimmy Damper

123570249
94854: RNCC: 3 | RNVC: 2
094854: RNCC: 5 | RNVC: 2

25 Apr 2002

5340-12-301-5807
Mending Plate

123015807
4175140: RNCC: 3 | RNVC: 2

25 Oct 1984

5340-12-302-1230
Nonmetallic Bumper

123021230
3817510597: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-12-333-3396
Lock-Release Lever

123333396
6723878: RNCC: 3 | RNVC: 2
6723878: RNCC: 5 | RNVC: 9

25 Nov 1993

5340-12-172-6639
Angle Bracket

121726639
02514467: RNCC: 3 | RNVC: 2
2514467EE5062-55: RNCC: 5 | RNVC: 2

8 Feb 1978

5340-12-358-9205
Angle Bracket

123589205
3852953340: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-375-7074
Mounting Bracket

123757074
4615003331: RNCC: 3 | RNVC: 2

26 Jun 2008

5340-12-027-5863

Load More Results