What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 47 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 47 of 178

5340-12-366-1364
Mounting Bracket

123661364
2500255-190025.001.0: RNCC: 2 | RNVC: 2
2500255-190025.001.0: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-12-316-5322
Helical Compression Spring Seat

123165322
2300007-221000.022.0: RNCC: 2 | RNVC: 2
2300007-221000.022.0: RNCC: 3 | RNVC: 2
2300007-221000.022.0: RNCC: 5 | RNVC: 2

24 Jan 1989

5340-12-338-6967
Extension Drawer Slide

123386967
69000-133: RNCC: 3 | RNVC: 2

16 Aug 1995

5340-12-353-8603
Angle Bracket

123538603
J92220341-001: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-171-2488
Mending Plate

121712488
306-016-80-090: RNCC: 3 | RNVC: 2
81.67116-0010: RNCC: 5 | RNVC: 2
035078: RNCC: 5 | RNVC: 2
81671160010: RNCC: 5 | RNVC: 2

21 Sep 1977

5340-12-190-6853
Lock-Release Lever

121906853
NO PRIMARY REF 12-190-6853: RNCC: 3 | RNVC: 2
28-10303-03: RNCC: 5 | RNVC: 9
28/10303.03: RNCC: 5 | RNVC: 9
6105 980673: RNCC: 5 | RNVC: 9
6105980673: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-152-7795
Retaining Strap

121527795
DIN1597-26ZN: RNCC: 2 | RNVC: 2
DIN1597-26ZN: RNCC: 3 | RNVC: 2
DIN1597-26ZN: RNCC: 3 | RNVC: 2
DIN1597-26ZN: RNCC: 5 | RNVC: 2
DIN1597-26ZN: RNCC: 5 | RNVC: 2
DIN1597-26BK: RNCC: 5 | RNVC: 9
26DIN1597: RNCC: 5 | RNVC: 9
5410000026: RNCC: 5 | RNVC: 9
DIN1597-26: RNCC: 5 | RNVC: 9
26DIN1597: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-2439
Mounting Bracket

127022439
VG95211-ML-127022439: RNCC: 2 | RNVC: 2
30.7712.50: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-318-4813
Mending Plate

123184813
23182-7000.05: RNCC: 3 | RNVC: 2
29658: RNCC: 5 | RNVC: 2
23182-7000.05: RNCC: 5 | RNVC: 2
23182-7000.05: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-12-189-7703
Handwheel

121897703
VG85089-A-63X7-RG: RNCC: 2 | RNVC: 2
VG85089-A-63X7-RG: RNCC: 3 | RNVC: 2
VG85089-A-63X7-RG: RNCC: 3 | RNVC: 2
VG85089-A-63X7-RG: RNCC: 3 | RNVC: 9
A63X7VG85089-RG5: RNCC: 5 | RNVC: 9
A63X7VG85089GCUSN5ZNPB: RNCC: 5 | RNVC: 9
A63X7VG85089RG5: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-181-4232
Mounting Bracket

121814232
81259400171: RNCC: 3 | RNVC: 2
81.25940.0171: RNCC: 5 | RNVC: 2
23246-062008-001-0: RNCC: 5 | RNVC: 9
23246-062008.001.0: RNCC: 5 | RNVC: 9

22 Nov 1979

5340-12-330-8889
Rod End Clevis

123308889
480-7347-05-14-00: RNCC: 3 | RNVC: 2
480/7347-05-14-00: RNCC: 5 | RNVC: 2

19 Feb 1993

5340-12-190-6850
Lock-Release Lever

121906850
NO PRIMARY REF 12-190-6850: RNCC: 3 | RNVC: 2
6105980672: RNCC: 5 | RNVC: 9
28-10303-02: RNCC: 5 | RNVC: 9
28/10303.02: RNCC: 5 | RNVC: 9
6105 980672: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-383-1733
Mounting Bracket

123831733
101 282 020 000: RNCC: 3 | RNVC: 2

22 Sep 2010

5340-12-316-3993
Helical Compression Spring Retainer

123163993
5191073: RNCC: 3 | RNVC: 2

16 Jan 1989

5340-12-350-0076
Manual Control Lever

123500076
88626805002: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-357-2784
Angle Bracket

123572784
81974880315: RNCC: 3 | RNVC: 2
81.97488.0315: RNCC: 5 | RNVC: 2

29 May 2002

5340-12-392-6684
Pipe Bracket

123926684
AA529400: RNCC: 3 | RNVC: 2

27 Jun 2013

5340-12-042-4471

5340-12-357-9022
Dust And Moisture Seal Protective Cover

123579022
2300042-255151.000: RNCC: 2 | RNVC: 2
2300042-255151.000: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-371-2111
Loop Clamp

123712111
903348: RNCC: 3 | RNVC: 2

28 Feb 2007

5340-12-133-2814

5340-12-357-1650
Mounting Bracket

123571650
181004313: RNCC: 2 | RNVC: 2
181004313: RNCC: 3 | RNVC: 2

14 May 2002

5340-12-040-6650

5340-12-346-4581
Spring Tension Clip

123464581
912002008003: RNCC: 3 | RNVC: 2

28 Jul 1998

5340-12-358-9194
Mounting Bracket

123589194
3805401073: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-352-7139
Access Cover

123527139
64416360: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-357-5619
Retaining Band

123575619
49100021300: RNCC: 3 | RNVC: 2

2 Jul 2002

5340-12-300-0064
Mending Plate

123000064
5801998-663210.09: RNCC: 2 | RNVC: 2
5801998-663210.09: RNCC: 3 | RNVC: 2

21 Jun 1984

5340-12-307-1959
Kunst Gleitschiene

123071959
RP981802: RNCC: 3 | RNVC: 2

21 May 1986

5340-12-186-3442

5340-12-329-2227
Retaining Band

123292227
R26637: RNCC: 3 | RNVC: 2
R26637: RNCC: 5 | RNVC: 9

24 Jul 1992

5340-12-327-4195
Nonmetallic Bumper

123274195
CTWA-PR24: RNCC: 3 | RNVC: 2
272.366 336: RNCC: 5 | RNVC: 2

21 Jan 1992

5340-12-199-1305
Compression Cup

121991305
3600530096: RNCC: 3 | RNVC: 2
360 053 00 96: RNCC: 5 | RNVC: 2

28 Mar 1984

5340-12-369-6310
Door Handle

123696310
E18 122 1906: RNCC: 3 | RNVC: 2
18 122 1906: RNCC: 5 | RNVC: 2
181221906: RNCC: 5 | RNVC: 2

3 Aug 2006

5340-12-166-0103
Befestigun Schelle

5340-12-165-9915
Verbindungs Platte

5340-12-184-2326
Spring Tension Clip

121842326
211609625: RNCC: 3 | RNVC: 2

8 Jul 1980

5340-12-353-7709
Angle Bracket

123537709
CBD45051P03: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-315-8045
Mending Plate

123158045
5153433402: RNCC: 3 | RNVC: 2
515.343.34.02: RNCC: 5 | RNVC: 2
5153433401: RNCC: 5 | RNVC: 9
515.343.34.01: RNCC: 5 | RNVC: 9

26 Nov 1988

5340-12-320-2907
Double Angle Bracket

123202907
1360.12.10.438: RNCC: 3 | RNVC: 2

28 Dec 1989

5340-12-186-8054
Bow Handle

121868054
VG95149A82X22-M5NRST-BK: RNCC: 2 | RNVC: 2
028-911000-03-0: RNCC: 3 | RNVC: 2

6 Feb 1981

5340-12-163-6685
Handwheel

121636685
VG85088-B-80X8-GT: RNCC: 2 | RNVC: 2
VG85088-B-80X8-RG: RNCC: 2 | RNVC: 2
VG85088-B-80X8-GT: RNCC: 3 | RNVC: 2
VG85088-B-80X8-RG: RNCC: 3 | RNVC: 2
VG85088-B-80X8-GT: RNCC: 3 | RNVC: 2
VG85088-B-80X8-RG: RNCC: 3 | RNVC: 2
VG85088-B-80X8-GT: RNCC: 3 | RNVC: 9
VG85088-B-80X8-RG: RNCC: 3 | RNVC: 9
B80X8VG85088GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-348-8718
Mounting Bracket

123488718
245/7346-51-00-01: RNCC: 3 | RNVC: 2

30 Aug 1999

5340-12-309-6956
Pipe Bracket

123096956
00445042: RNCC: 3 | RNVC: 2
SPGU6011.114/30SK: RNCC: 3 | RNVC: 2
774212977: RNCC: 5 | RNVC: 2
1816011114: RNCC: 5 | RNVC: 2
HS114: RNCC: 5 | RNVC: 9

17 Feb 1987

5340-12-186-5863
Halter

121865863
C22280-A1000-C96: RNCC: 3 | RNVC: 2
C22280A1000C96: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-12-194-6354
Mending Plate

121946354
66.3851.115.00-A001: RNCC: 3 | RNVC: 2
163958: RNCC: 5 | RNVC: 2
66-3851-115-00A001: RNCC: 5 | RNVC: 9

23 Nov 1982

5340-12-190-6221
Retaining Strap

121906221
1200037-116.005: RNCC: 3 | RNVC: 2
1200037-111-005: RNCC: 5 | RNVC: 9

7 Dec 1981

5340-12-365-1535
Spring Tension Clip

123651535
80975: RNCC: 3 | RNVC: 2
0049974490: RNCC: 5 | RNVC: 2

2 Dec 2004

5340-12-317-8844
Door Holder

123178844
40 0165 535: RNCC: 2 | RNVC: 2
40 0165 535: RNCC: 3 | RNVC: 2
40 0165 535: RNCC: 5 | RNVC: 9

23 May 1989

5340-12-345-7537
Mounting Bracket

123457537
AH30604G01: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-12-317-5256
Access Cover

123175256
3616904: RNCC: 3 | RNVC: 2

14 Apr 1989

5340-12-314-5449
Mounting Bracket

123145449
6454320140: RNCC: 3 | RNVC: 2
645 432 01 40: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-320-8750
Retaining Strap

123208750
8935110304: RNCC: 3 | RNVC: 9

28 Feb 1990

5340-12-314-0302
Expansion Shield

123140302
50329: RNCC: 3 | RNVC: 9

31 May 1988

5340-12-314-7077
Loop Clamp

123147077
51.0526.030.02: RNCC: 3 | RNVC: 2

2 Aug 1988

5340-12-382-4499
Dust And Moisture Seal Protective Cap-Plug

123824499
09876: RNCC: 3 | RNVC: 2

23 Jun 2010

5340-12-317-2982
Escutcheon Plate

123172982
3227660325: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-186-2487
Mending Plate

121862487
56652012052: RNCC: 3 | RNVC: 2

9 Dec 1980

5340-12-310-9217
Catch Strike

123109217
78203 51106: RNCC: 2 | RNVC: 2
7820351106: RNCC: 3 | RNVC: 2
78203 51106: RNCC: 5 | RNVC: 9

9 Jul 1987

5340-12-389-0174
Manual Control Lever

123890174
6900355400: RNCC: 3 | RNVC: 2
159479: RNCC: 5 | RNVC: 2

16 May 2012

5340-12-312-4739
Mounting Bracket

123124739
2300013-4524.00: RNCC: 2 | RNVC: 2
2300013-4524.00: RNCC: 3 | RNVC: 2
2300013-4524.00: RNCC: 5 | RNVC: 9

12 Jan 1988

5340-12-357-9000
Rod End Clevis

123579000
12168502: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-393-8519
Access Cover

123938519
1103347: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-12-301-7690
Nonmetallic Bumper

123017690
4179156: RNCC: 3 | RNVC: 2
S12B.K05.00.00.008: RNCC: 5 | RNVC: 2

8 Nov 1984

5340-12-349-0839
Mending Plate

123490839
184110301: RNCC: 2 | RNVC: 2
184110301: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-12-701-2712
Mounting Bracket

127012712
VG95211-ML-127012712: RNCC: 2 | RNVC: 2
5.12.4805.8004.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-364-3926
Angle Bracket

123643926
598101-181900.006.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-336-1694
Handle Grip

123361694
TL4210-0113-180: RNCC: 2 | RNVC: 2
K64-20.0-S11 LFD 2: RNCC: 3 | RNVC: 2
K19-156.0-S1: RNCC: 5 | RNVC: 9

3 Nov 1994

5340-12-363-1322
Helical Compression Spring Seat

123631322
5981-283000.003.0: RNCC: 3 | RNVC: 2

6 May 2004

5340-12-335-2161
Recess Handle

123352161
60 229-004: RNCC: 3 | RNVC: 2
100-320-005: RNCC: 5 | RNVC: 2

27 Jul 1994

5340-12-182-1116
Compression Cup

121821116
T200-19: RNCC: 3 | RNVC: 2

14 Jan 1980

5340-12-178-9071
Vent Plug

121789071
C177-A22-C2: RNCC: 2 | RNVC: 2
C177A22C2: RNCC: 3 | RNVC: 2
C177-A22-C2: RNCC: 5 | RNVC: 2
C177A22C2: RNCC: 5 | RNVC: 2
C177-A22-C2: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-301-7425
Nonmetallic Bumper

123017425
4178747: RNCC: 3 | RNVC: 2
S12B.K02.05.01.002: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-316-9952
Dust And Moisture Seal Protective Cap

123169952
1012329950: RNCC: 3 | RNVC: 2

1 Mar 1989

5340-12-346-4270
Loop Clamp

123464270
621 997 00 90 KZ: RNCC: 3 | RNVC: 2
7411066: RNCC: 5 | RNVC: 2

24 Jul 1998

5340-12-308-8399
Double Angle Bracket

123088399
SK143415: RNCC: 3 | RNVC: 2

21 Nov 1986

5340-12-333-5152
Dust And Moisture Seal Boot

123335152
1104630096: RNCC: 3 | RNVC: 2

28 Dec 1993

5340-12-314-8160
Gummi- Riemen

123148160
786488NM: RNCC: 3 | RNVC: 2

12 Aug 1988

5340-12-350-4351
Section Block Clamp

123504351
JN0413EGF60: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-333-7522
Angle Bracket

123337522
15 0004 436: RNCC: 2 | RNVC: 2
15 0004 436: RNCC: 3 | RNVC: 2
150004436: RNCC: 5 | RNVC: 2

1 Feb 1994

5340-12-042-0409

5340-12-334-5101
T Bracket

123345101
105-80416-01: RNCC: 3 | RNVC: 2
105-80416.01: RNCC: 5 | RNVC: 2

18 May 1994

5340-12-357-1020
Loop Clamp

123571020
EN4114F16WH1: RNCC: 2 | RNVC: 2

7 May 2002

5340-12-367-5248
Spring Tension Clip

123675248
155971787B: RNCC: 3 | RNVC: 2

29 Aug 2005

5340-12-367-5899
Multiple Angle Bracket

123675899
7801044356AA: RNCC: 3 | RNVC: 2

7 Sep 2005

5340-12-367-3241
Section Block Clamp

123673241
1218 8917: RNCC: 3 | RNVC: 2

4 Aug 2005

5340-12-169-2466
Retaining Strap

121692466
3859950110: RNCC: 3 | RNVC: 2

27 Apr 1977

5340-12-380-6343
Swivel Caster

123806343
690 762: RNCC: 3 | RNVC: 2

16 Nov 2009

5340-12-367-5454
Mounting Bracket

123675454
H10588: RNCC: 3 | RNVC: 2

31 Aug 2005

5340-12-349-6098
Multiple Angle Bracket

123496098
2760.1396: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-345-4313
Mounting Bracket

123454313
54.0053.107.00: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-12-301-7297
Nonmetallic Bumper

123017297
43712256-601: RNCC: 2 | RNVC: 2
43712256-601: RNCC: 3 | RNVC: 2
43712256-601: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-364-1985
Magnetic Catch

123641985
246.96.008: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-315-7243
Dust And Moisture Seal Protective Plug

123157243
0019975086: RNCC: 3 | RNVC: 2
001 997 50 86: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-330-6468
Loop Clamp

123306468
DIN3016-2-G2-40X20-W5: RNCC: 2 | RNVC: 2
SP40/20SKZ-W5-ZWEITEILIG: RNCC: 3 | RNVC: 2
DIN3016-G1-40X20-W5 ZWEITEILIG: RNCC: 3 | RNVC: 2
DIN3016-G1-40X20-W5 ZWEITEILIG: RNCC: 5 | RNVC: 2
SP40/20SZ W5 2-TLG.: RNCC: 5 | RNVC: 2

20 Jan 1993

5340-12-188-7850
Bow Handle

121887850
2500075-191106.000.0: RNCC: 2 | RNVC: 2
2500075-191106.000.0: RNCC: 3 | RNVC: 2
2500075-191106-000-0: RNCC: 5 | RNVC: 2
2500075-191106-000-0: RNCC: 5 | RNVC: 9
2500075-191106.000.0: RNCC: 5 | RNVC: 9

29 Jul 1981

5340-12-352-0538
Loop Clamp

123520538
23223-150000.04.0: RNCC: 2 | RNVC: 2
23223-150000.04.0: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-12-387-4831
Barrel Bolt

123874831
65000315: RNCC: 3 | RNVC: 2

28 Dec 2011

5340-12-302-6777
Mending Plate

123026777
6210500041: RNCC: 3 | RNVC: 2

22 Jan 1985

5340-12-391-7448
Dust And Moisture Seal Protective Cap-Plug

123917448
9736920058: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-12-305-5966
Pipe Bracket

123055966
4164260540: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-309-7944
Access Cover

123097944
6131952: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-302-5402
Leather Strap

123025402
CF 339 138: RNCC: 3 | RNVC: 2
CF 339 138: RNCC: 3 | RNVC: 2

11 Jan 1985

5340-12-320-7983
Dust And Moisture Seal Boot

123207983
0224 7202: RNCC: 3 | RNVC: 2
2247202EE0141-47: RNCC: 5 | RNVC: 2

16 Feb 1990

5340-12-377-7721
Access Cover

123777721
64293571: RNCC: 3 | RNVC: 2

10 Feb 2009

5340-12-199-3964
Resilient Mount

121993964
3104100822: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-336-5457
Retaining Strap

123365457
758638: RNCC: 3 | RNVC: 2
77.0226: RNCC: 5 | RNVC: 2
0745254017: RNCC: 5 | RNVC: 2

24 Nov 1994

5340-12-701-6505
Angle Bracket

127016505
VG95211-ML-127016505: RNCC: 2 | RNVC: 2
5.12.7206.1650.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-354-5705
Mounting Plate

123545705
J92228003-005: RNCC: 3 | RNVC: 2

6 Aug 2001

5340-12-358-1560
Mending Plate

123581560
2800-193110.009.0: RNCC: 2 | RNVC: 2
2800-193110.009.0: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-12-361-6502
Clamping Catch

123616502
2000-VA-NS-NRE-4,2: RNCC: 3 | RNVC: 2

29 Oct 2003

5340-12-348-0663
Angle Bracket

123480663
58R052-17174-1: RNCC: 2 | RNVC: 2
58R052-17174-1: RNCC: 3 | RNVC: 2

8 Apr 1999

5340-12-335-8626
Webbing Strap

123358626
79017/026-2600-1300: RNCC: 3 | RNVC: 2
DIN60060-2-25X1300X1300-C4/D2: RNCC: 5 | RNVC: 9

26 Sep 1994

5340-12-309-8535
Retaining Strap

123098535
2000067-300.01: RNCC: 2 | RNVC: 2
080480601-0203.00: RNCC: 3 | RNVC: 2
2000067-300-01: RNCC: 5 | RNVC: 9

11 Mar 1987

5340-12-347-6102
Dust And Moisture Seal Boot

123476102
002-000/0000-12A4: RNCC: 3 | RNVC: 2
10-12BN/405: RNCC: 5 | RNVC: 2

14 Jan 1999

5340-12-176-2784
Leather Strap

121762784
23111-4162.00: RNCC: 2 | RNVC: 2
23111-4162.00: RNCC: 3 | RNVC: 2
23111-4162-00: RNCC: 5 | RNVC: 2
HT37/3891/01: RNCC: 5 | RNVC: 9
23111-4162-00: RNCC: 5 | RNVC: 9
23111-4162.00: RNCC: 5 | RNVC: 9
23111-4162-00: RNCC: 5 | RNVC: 9

23 Nov 1978

5340-12-700-3204
Spring Tension Clip

127003204
51-200711004: RNCC: 2 | RNVC: 2
2A28-2-15: RNCC: 3 | RNVC: 2

12 Dec 1991

5340-12-348-1132
Angle Bracket

123481132
701-431510-000-0: RNCC: 3 | RNVC: 2

15 Apr 1999

5340-12-701-4213
Loop Clamp

127014213
VG95211-ML-127014213: RNCC: 2 | RNVC: 2
5.12.5312.1000.21: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-337-8964
Webbing Strap

123378964
4617700785: RNCC: 3 | RNVC: 2

2 May 1995

5340-12-381-4966
Mounting Bracket

123814966
4044000101: RNCC: 3 | RNVC: 2

23 Feb 2010

5340-12-010-8638

5340-12-358-8101
Angle Bracket

123588101
85264210002: RNCC: 3 | RNVC: 2
85.26421.0002: RNCC: 5 | RNVC: 2

18 Nov 2002

5340-12-370-3284
Angle Bracket

123703284
1216 1551: RNCC: 3 | RNVC: 2

26 Oct 2006

5340-12-330-2195
Bow Handle

123302195
5810037: RNCC: 3 | RNVC: 2

17 Nov 1992

5340-12-324-5123
Flush Lock

123245123
6020317: RNCC: 3 | RNVC: 2
1851128: RNCC: 5 | RNVC: 2

25 Feb 1991

5340-12-353-7708
Rod End Clevis

123537708
CBD45017P12: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-313-4632
Butt Hinge Leaf

123134632
2300279-9715.02: RNCC: 2 | RNVC: 2
2300279-9715.02: RNCC: 3 | RNVC: 2
2300279-9715.02: RNCC: 5 | RNVC: 9
9871606: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-172-1250
Clamp Bolt Assembly

121721250
N00A0400240102A: RNCC: 3 | RNVC: 2
00004240102A: RNCC: 5 | RNVC: 2
00004240102A: RNCC: 5 | RNVC: 9
N00A0400240102A: RNCC: 5 | RNVC: 9

22 Dec 1977

5340-12-185-0914
Dust And Moisture Seal Protective Cap

121850914
1203 309 078: RNCC: 3 | RNVC: 2
81384120008: RNCC: 5 | RNVC: 2
01273117: RNCC: 5 | RNVC: 2
1203309078: RNCC: 5 | RNVC: 2
1203309078: RNCC: 5 | RNVC: 9

9 Sep 1980

5340-12-313-8769
Access Cover

123138769
3512 713 11523: RNCC: 3 | RNVC: 2

17 May 1988

5340-12-392-4127
Mounting Plate

123924127
I011082: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-12-310-6232
Access Cover

123106232
52.0260.011.00: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-12-183-8782
Webbing Strap

121838782
181871223A: RNCC: 3 | RNVC: 2

29 May 1980

5340-12-307-1958
Kunst Gleitschiene

123071958
RP981801: RNCC: 3 | RNVC: 2

21 May 1986

5340-12-378-3283
Mounting Bracket

123783283
81623054013: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-180-4237
Plain Solid Disk

121804237
02245: RNCC: 3 | RNVC: 2
02245: RNCC: 5 | RNVC: 9

10 Sep 1979

5340-12-366-6067
Webbing Strap

123666067
4618902494: RNCC: 3 | RNVC: 2

12 May 2005

5340-12-092-3071

5340-12-024-2661

5340-12-194-0170
Resilient Mount

121940170
E21-03-40: RNCC: 3 | RNVC: 2
TX3051/04: RNCC: 5 | RNVC: 2
E21-03-40: RNCC: 5 | RNVC: 9

23 Sep 1982

5340-12-302-8131
Metal Runner

123028131
556-526000.020: RNCC: 3 | RNVC: 2
556-526000-020: RNCC: 5 | RNVC: 2

4 Feb 1985

5340-12-390-6222
Loop Clamp

123906222
SK1118-977256.000.0: RNCC: 3 | RNVC: 2
7106887: RNCC: 5 | RNVC: 2

28 Nov 2012

5340-12-339-7104
Mounting Plate

123397104
2500255-195900.001.0: RNCC: 2 | RNVC: 2
2500255-195900.001.0: RNCC: 3 | RNVC: 2

29 Dec 1995

5340-12-198-2677
Bow Handle

121982677
23302-185500.00: RNCC: 2 | RNVC: 2
23302-185500: RNCC: 2 | RNVC: 2
2608316: RNCC: 3 | RNVC: 2
2-2608-316: RNCC: 5 | RNVC: 2

6 Jan 1984

5340-12-361-7726
Mounting Plate

123617726
2653-184810.001.0: RNCC: 2 | RNVC: 2
2653-184810.001.0: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-12-357-1542
Mounting Bracket

123571542
6.373-418: RNCC: 3 | RNVC: 2
6.373-418.0: RNCC: 5 | RNVC: 2

13 May 2002

5340-12-163-9444
Hand Crank

121639444
VG85086-B-80X8-GT: RNCC: 2 | RNVC: 2
VG85086-B-80X8-GT: RNCC: 3 | RNVC: 2
VG85086-B-80X8-GT: RNCC: 3 | RNVC: 2
VG85086-B-80X8-GT: RNCC: 3 | RNVC: 9
61820060: RNCC: 5 | RNVC: 2
604103: RNCC: 5 | RNVC: 2
B80X8VG85086GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-340-6389
Resilient Mount

123406389
DIN95368-B1-1-NR70-ST: RNCC: 2 | RNVC: 2
K56 HART: RNCC: 5 | RNVC: 2
786025HART: RNCC: 5 | RNVC: 2
0716111045: RNCC: 5 | RNVC: 2
716111045: RNCC: 5 | RNVC: 2
133002.NR70.ST: RNCC: 5 | RNVC: 2
KONUS-LAGER-786025.NR70.ST: RNCC: 5 | RNVC: 2
VG95368-B1-1-NR70ST: RNCC: 5 | RNVC: 9

15 May 1996

5340-12-700-4992
Flush Lock

127004992
VG95211-ML-127004992: RNCC: 2 | RNVC: 2
1 OST1 10500-72: RNCC: 3 | RNVC: 2
0500805042659: RNCC: 5 | RNVC: 2
1 OST 1 10500-72: RNCC: 5 | RNVC: 2

19 Sep 1992

5340-12-310-4136
Angle Bracket

123104136
A-243846-003: RNCC: 3 | RNVC: 2
A243846-003: RNCC: 5 | RNVC: 2

19 May 1987

5340-12-353-4572
Mounting Plate

123534572
521-120300.10.0: RNCC: 2 | RNVC: 2
521-120300.10.0: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-12-321-9425
Metal Runner

123219425
702-241400-951-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-313-0164
Double Angle Bracket

123130164
P-086147-012: RNCC: 3 | RNVC: 2
P086147-012: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-339-3018
Access Cover

123393018
2300223-207220.06.0: RNCC: 2 | RNVC: 2
2300223-207220.06.0: RNCC: 3 | RNVC: 2
A4-248.052-125: RNCC: 5 | RNVC: 2
23 00 223-207 220 06 0: RNCC: 5 | RNVC: 2
3000008-207220.06.0: RNCC: 5 | RNVC: 2

7 Nov 1995

5340-12-385-7582
Access Cover

123857582
JSE0046300: RNCC: 3 | RNVC: 2
62800323: RNCC: 5 | RNVC: 2
IMT01012: RNCC: 5 | RNVC: 2

6 Jul 2011

5340-12-159-8313
Quick Release Plunger

121598313
37305-504: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-301-2396
Retaining Strap

123012396
1009230: RNCC: 3 | RNVC: 2
4115473: RNCC: 5 | RNVC: 2

29 Sep 1984

5340-12-347-0022
Access Cover

123470022
62.7000.162.00-A001: RNCC: 2 | RNVC: 2
62.7000.162.00-A001: RNCC: 3 | RNVC: 2

12 Oct 1998

5340-12-196-1310
Angle Bracket

121961310
1000125-11100.02: RNCC: 2 | RNVC: 2

1 Jun 1983

5340-12-359-9391
Mounting Bracket

123599391
2500261-850460.000.0: RNCC: 2 | RNVC: 2
2500261-850460.000.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-348-7708
Dust And Moisture Seal Protective Plug

123487708
800X(SIZEDN40): RNCC: 3 | RNVC: 2

17 Aug 1999

5340-12-387-0264
Webbing Strap

123870264
4618600652: RNCC: 3 | RNVC: 2
461 860 06 52: RNCC: 5 | RNVC: 2

27 Oct 2011

5340-12-300-2719
Mending Plate

123002719
A11A243303511: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-375-1406
Hand Crank

123751406
129316: RNCC: 3 | RNVC: 2
129316: RNCC: 5 | RNVC: 2

24 Apr 2008

5340-12-349-1757
Access Cover

123491757
181306303: RNCC: 2 | RNVC: 2
181306303: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-12-198-8884
Angle Bracket

121988884
8371501973: RNCC: 3 | RNVC: 2
15010208: RNCC: 5 | RNVC: 2

9 Mar 1984

5340-12-176-2599
Clamping Catch

121762599
183847511A: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-334-0984
Dust And Moisture Seal Boot

123340984
04047010: RNCC: 3 | RNVC: 2

21 Mar 1994

5340-12-358-9224
Mounting Bracket

123589224
3854300110: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-350-1827
Access Cover

123501827
105-62472.01: RNCC: 3 | RNVC: 2

24 Feb 2000

5340-12-044-3272

5340-12-336-7087
Detent Plunger

123367087
8404945: RNCC: 3 | RNVC: 2

12 Dec 1994

5340-12-386-8775
Retaining Bail

123868775
05713588: RNCC: 3 | RNVC: 2
04505859: RNCC: 5 | RNVC: 2
CV191806: RNCC: 5 | RNVC: 2
05713588: RNCC: 5 | RNVC: 2

11 Oct 2011

5340-12-347-5761
Manual Control Handle

123475761
5800879-61.002: RNCC: 3 | RNVC: 2

11 Jan 1999

5340-12-323-2229
Retaining Strap

123232229
100017033: RNCC: 3 | RNVC: 2

2 Nov 1990

5340-12-357-8160
Multiple Angle Bracket

123578160
2300388-250631.003: RNCC: 2 | RNVC: 2
9940693: RNCC: 3 | RNVC: 2
2300388-250631.003: RNCC: 5 | RNVC: 2

29 Jul 2002

5340-12-156-2806

5340-12-701-8150
Loop Clamp

127018150
VG95211-ML-127018150: RNCC: 2 | RNVC: 2
5.12.9205.0045.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-164-5716
Nonmetallic Bumper

121645716
DIN95364-C20X13,5-NR60ST: RNCC: 2 | RNVC: 2
81.96210-0372: RNCC: 5 | RNVC: 2
81962100372: RNCC: 5 | RNVC: 2
781056MITTEL: RNCC: 5 | RNVC: 2
57810560009: RNCC: 5 | RNVC: 2
540015-M6.NR60.ST: RNCC: 5 | RNVC: 2
540015.NR60.ST: RNCC: 5 | RNVC: 2
550-0053: RNCC: 5 | RNVC: 9
VG95364-C20X13,5-NR60ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-194-0602
Hinge Torsion Bar

121940602
2300127-183100.002.0: RNCC: 2 | RNVC: 2
2300127-183100.002.0: RNCC: 3 | RNVC: 2
418284: RNCC: 3 | RNVC: 2
2300127-183100.002.0: RNCC: 5 | RNVC: 2
2300127-183100.002.0: RNCC: 5 | RNVC: 9

28 Sep 1982

5340-12-333-5315
Webbing Strap

123335315
01802-2-SCHLAUFE-FE1500-LE2000MM: RNCC: 3 | RNVC: 2
01802-2-FE=1500-LE=2000: RNCC: 5 | RNVC: 2
01802-2-SCHLAUFE-FE1500-LE2000: RNCC: 5 | RNVC: 2
79036/SCHLAUFE-3500-1500: RNCC: 5 | RNVC: 2
DIN60060-2-25X1500X2000-C1/SCHLA: RNCC: 5 | RNVC: 9

3 Jan 1994

5340-12-314-8938
Shimmy Damper

123148938
16/4-223-175-A12-B12-455N: RNCC: 3 | RNVC: 2
6498-033: RNCC: 5 | RNVC: 2
6498033: RNCC: 5 | RNVC: 2

24 Aug 1988

5340-12-307-3660
Retaining Strap

123073660
0.32.0111.0: RNCC: 3 | RNVC: 2
1001-22: RNCC: 3 | RNVC: 2
3757747: RNCC: 5 | RNVC: 2
3757747EY3131-80: RNCC: 5 | RNVC: 2
6100129-165: RNCC: 5 | RNVC: 2
FT6100129-165: RNCC: 5 | RNVC: 2

10 Jun 1986

5340-12-170-5224
Loop Clamp

121705224
HNY9V: RNCC: 3 | RNVC: 2
12H4316: RNCC: 5 | RNVC: 2
211-65099: RNCC: 5 | RNVC: 2
H-NY 9V: RNCC: 5 | RNVC: 2
203009101: RNCC: 5 | RNVC: 9

20 Jul 1977

5340-12-304-7300
Mending Plate

123047300
1229-210.11: RNCC: 2 | RNVC: 2
1229-210.11: RNCC: 3 | RNVC: 2
533221-0251.000: RNCC: 3 | RNVC: 2
1229-210.11: RNCC: 5 | RNVC: 2
533221-0251.000: RNCC: 5 | RNVC: 9
1229-210.11: RNCC: 5 | RNVC: 9

15 Aug 1985

5340-12-300-2124
Retaining Strap

123002124
13380: RNCC: 3 | RNVC: 2
1159950665: RNCC: 5 | RNVC: 2
02-3078: RNCC: 5 | RNVC: 2

14 Jul 1984

5340-12-190-8853
Dust And Moisture Seal Protective Cap

121908853
AM647-54-11: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-315-1289
Mending Plate

123151289
5801435-080000.01: RNCC: 3 | RNVC: 2
5801435-080000.01: RNCC: 5 | RNVC: 9

20 Sep 1988

5340-12-331-1330
Shimmy Damper

123311330
C42300-A140-B7: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-12-300-9861
Mending Plate

123009861
5802281-3000.02: RNCC: 2 | RNVC: 2
7802035302: RNCC: 3 | RNVC: 2
78020 35302: RNCC: 5 | RNVC: 9

15 Sep 1984

5340-12-315-5794
Angle Bracket

123155794
512214-2300.000: RNCC: 3 | RNVC: 2
512214-2300: RNCC: 5 | RNVC: 2

10 Nov 1988

5340-12-379-7196
Manual Control Handle

123797196
132112: RNCC: 3 | RNVC: 2

26 Aug 2009

5340-12-128-0864

5340-12-010-3708

5340-12-349-2451
Dust And Moisture Seal Protective Cap

123492451
7673 040 112: RNCC: 3 | RNVC: 2
7673040112: RNCC: 5 | RNVC: 9

14 Oct 1999

5340-12-310-4858
Mending Plate

123104858
2300227-344000.001: RNCC: 2 | RNVC: 2
2300227-344000.001: RNCC: 3 | RNVC: 2
2300227-344000.001: RNCC: 5 | RNVC: 9

26 May 1987

5340-12-363-7043
Spring Loaded Cylinder Fastener

123637043
2212608: RNCC: 3 | RNVC: 2
EH2212.608: RNCC: 5 | RNVC: 2

16 Jul 2004

5340-12-342-8962
Butt Hinge

123428962
4303610055: RNCC: 3 | RNVC: 2

14 Apr 1997

5340-12-364-4403
Lock-Release Lever

123644403
23722237: RNCC: 3 | RNVC: 2

25 Sep 2004

5340-12-358-8743
Multiple Angle Bracket

123588743
5400051-852061.00: RNCC: 2 | RNVC: 2
5400051-852061.00: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-358-9518
Nut And Bolt Locking Plate

123589518
1000151-278300.03: RNCC: 2 | RNVC: 2
100.0277.00.03: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-357-1575
Access Cover

123571575
4165537: RNCC: 3 | RNVC: 2

14 May 2002

5340-12-356-4198
Angle Bracket

123564198
3011R-800000.07: RNCC: 2 | RNVC: 2
3011R-800000.07: RNCC: 3 | RNVC: 2

26 Feb 2002

5340-12-050-2567

5340-12-043-2699

5340-12-387-8653
Loop Clamp

123878653
7094088: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-388-8822
Double Angle Bracket

123888822
5800181440: RNCC: 3 | RNVC: 2

3 May 2012

5340-12-348-5598
Hand Crank

123485598
BHAA028: RNCC: 3 | RNVC: 2

16 Jul 1999

5340-12-357-6439
Spring Tension Clip

123576439
0008241535: RNCC: 3 | RNVC: 2
186.004: RNCC: 5 | RNVC: 2

9 Jul 2002

5340-12-349-1886
Metal Grille

123491886
8852116431: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-315-9069
Mounting Bracket

123159069
54.0026.257.00: RNCC: 3 | RNVC: 2
54002625700: RNCC: 5 | RNVC: 2

7 Dec 1988

5340-12-316-2626
Strap Hinge

123162626
1000175-7000.02: RNCC: 2 | RNVC: 2
1000175-7000.02: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-12-360-8999
Butt Hinge

123608999
11040: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-365-6401
Spring Tension Clip

123656401
0099881878: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-314-2441
Butt Hinge Leaf

123142441
272.317 752: RNCC: 2 | RNVC: 2
272.317.752: RNCC: 3 | RNVC: 2
272.317 752: RNCC: 5 | RNVC: 9

21 Jun 1988

5340-12-358-2004
Nonmetallic Bumper

123582004
BK 206687: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-12-379-3862
Butt Hinge Leaf

123793862
373492: RNCC: 3 | RNVC: 2

17 Jul 2009

5340-12-043-3087

5340-12-043-2695

5340-12-335-3576
Angle Bracket

123353576
35630347: RNCC: 3 | RNVC: 2
66.3537.166.02-A001: RNCC: 3 | RNVC: 2

12 Aug 1994

5340-12-318-8470
Mounting Bracket

123188470
200200.0100.001: RNCC: 3 | RNVC: 2
2002.01.00.001: RNCC: 3 | RNVC: 9

22 Aug 1989

5340-12-388-1758
Mounting Bracket

123881758
5840988139: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-12-360-2716
Mortise Lock

123602716
81271500003: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-12-352-4310
Mechanical Stop

123524310
10139201: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-318-2437
Escutcheon Plate

123182437
1807250482: RNCC: 3 | RNVC: 2

22 Jun 1989

5340-12-381-3897
Mounting Bracket

123813897
4221 322 006: RNCC: 3 | RNVC: 2
4221 322 006: RNCC: 5 | RNVC: 2
15017724: RNCC: 5 | RNVC: 2

9 Feb 2010

5340-12-198-7577
Clamping Catch

121987577
1000042-133113: RNCC: 3 | RNVC: 2
1000042-133113: RNCC: 5 | RNVC: 9

23 Feb 1984

5340-12-357-8888
Mechanical Stop

123578888
11793901: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-12-350-0015
Rod End Clevis

123500015
217.834.07: RNCC: 3 | RNVC: 2
21783407: RNCC: 5 | RNVC: 2

4 Feb 2000

5340-12-134-6738

5340-12-091-7029

5340-12-318-5681
Mounting Plate

123185681
2653-073100.02: RNCC: 2 | RNVC: 2
2653-073100.02: RNCC: 3 | RNVC: 2
2653-073100.02: RNCC: 5 | RNVC: 9

28 Jul 1989

5340-12-380-4285
Loop Clamp

123804285
E61495-00: RNCC: 3 | RNVC: 2

29 Oct 2009

5340-12-136-1958
Retaining Strap

121361958
81974010038: RNCC: 3 | RNVC: 2
00004305659: RNCC: 5 | RNVC: 2
R5659: RNCC: 5 | RNVC: 2
00.00430-5659: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-339-7845
Webbing Strap

123397845
87-401.00-00.00-49: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-12-381-4677
Dust And Moisture Seal Protective Cover

123814677
320.001-192: RNCC: 3 | RNVC: 2

19 Feb 2010

5340-12-318-5008
Snap Hook

123185008
ASR20-108: RNCC: 3 | RNVC: 9

20 Jul 1989

5340-12-320-3810
Dust And Moisture Seal Protective Cap

123203810
C177-A22-C104: RNCC: 3 | RNVC: 2

9 Jan 1990

5340-12-330-1049
Mounting Bracket

123301049
8100211-300000-11-01: RNCC: 2 | RNVC: 2
8100211-300000-12-01: RNCC: 2 | RNVC: 2
8100211-300000-11-01: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-12-178-4061
Extension Drawer Slide Section

121784061
AWN186-E1: RNCC: 3 | RNVC: 2
AWN186-E1: RNCC: 3 | RNVC: 2
AWN186E1: RNCC: 5 | RNVC: 9
E1AWN186: RNCC: 5 | RNVC: 9
GE9101T115: RNCC: 5 | RNVC: 9
AWN186-E1: RNCC: 5 | RNVC: 9

20 Apr 1979

5340-12-185-4681
Angle Bracket

121854681
3553853: RNCC: 3 | RNVC: 2

9 Oct 1980

5340-12-171-6042
Dust And Moisture Seal Protective Plug

121716042
311831439A: RNCC: 3 | RNVC: 9

26 Oct 1977

5340-12-339-1390
Mounting Bracket

123391390
10.41.084.00: RNCC: 3 | RNVC: 2
0008631114: RNCC: 3 | RNVC: 2
104108400: RNCC: 5 | RNVC: 9

16 Oct 1995

5340-12-317-7329
Mending Plate

123177329
3666301: RNCC: 3 | RNVC: 2

5 May 1989

5340-12-330-3407
Belt-Strap Keeper

123303407
34260269: RNCC: 3 | RNVC: 2
34 260 165: RNCC: 3 | RNVC: 2
34 260 165: RNCC: 5 | RNVC: 9

3 Dec 1992

5340-12-316-4178
Manual Control Handle

123164178
5183812: RNCC: 3 | RNVC: 2

17 Jan 1989

5340-12-354-5106
Mounting Plate

123545106
A244102: RNCC: 3 | RNVC: 2

23 Jul 2001

5340-12-379-9994
Blank Panel

123799994
58291074: RNCC: 3 | RNVC: 2
CV169204: RNCC: 5 | RNVC: 2
58291074: RNCC: 5 | RNVC: 2

17 Sep 2009

5340-12-372-0415
Mounting Bracket

123720415
S282M4018102: RNCC: 2 | RNVC: 2
S282M4018102: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-12-385-5238
Mounting Bracket

123855238
9266544000: RNCC: 3 | RNVC: 2

10 Jun 2011

5340-12-164-5686

5340-12-347-5780
Rod End Clevis

123475780
559 098 24 90: RNCC: 3 | RNVC: 2

11 Jan 1999

5340-12-358-0092
Mounting Bracket

123580092
865344306: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-358-5470
Mounting Bracket

123585470
5411310141: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-377-8933
Mounting Bracket

123778933
0425 1599: RNCC: 3 | RNVC: 2

20 Feb 2009

5340-12-404-3249

5340-12-357-8149
Mounting Bracket

123578149
2300042-255504.000: RNCC: 2 | RNVC: 2
9941824: RNCC: 3 | RNVC: 2
2300042-255504.000: RNCC: 5 | RNVC: 2

29 Jul 2002

5340-12-165-7153
Double Angle Bracket

121657153
148092204: RNCC: 3 | RNVC: 2

22 Jun 1976

5340-12-353-4262
Spacing Threaded Standoff

123534262
52.2124.017.03: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-12-301-5592
Mending Plate

123015592
03179100: RNCC: 3 | RNVC: 2
03179100.194: RNCC: 5 | RNVC: 9

24 Oct 1984

5340-12-310-5410
Metal Runner

123105410
4227301: RNCC: 3 | RNVC: 2

29 May 1987

5340-12-199-2784
Retaining Strap

121992784
BD76MMN346: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-12-178-2479
Platte

121782479
T10724: RNCC: 3 | RNVC: 2
T10724: RNCC: 5 | RNVC: 9

9 Apr 1979

5340-12-131-5627
Spannschlosz

5340-12-010-2339

5340-12-317-2994
Nut And Bolt Locking Plate

123172994
3229940130: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-183-8106
Nonmetallic Bumper

121838106
211413381A: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-316-1701
Shimmy Damper

123161701
044709: RNCC: 3 | RNVC: 2
0007503680: RNCC: 5 | RNVC: 2

28 Dec 1988

5340-12-317-0002
Mounting Bracket

123170002
2300279-5089.00: RNCC: 2 | RNVC: 2
2300279-5089.00: RNCC: 3 | RNVC: 2
2300279-5089.00: RNCC: 5 | RNVC: 9
9869623: RNCC: 5 | RNVC: 9

2 Mar 1989

5340-12-308-6103
Retaining Strap

123086103
81974010652: RNCC: 3 | RNVC: 2
81.97401.0652: RNCC: 5 | RNVC: 2

28 Oct 1986

5340-12-317-2962
Spring Tension Clip

123172962
0009941345: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-342-6122
Mounting Plate

123426122
4110611460: RNCC: 3 | RNVC: 2
4110011460: RNCC: 5 | RNVC: 2

6 Mar 1997

5340-12-321-5391
Kunst Gleitschiene

123215391
115007: RNCC: 3 | RNVC: 2

30 May 1990

5340-12-373-9211
Loop Clamp

123739211
5546709: RNCC: 2 | RNVC: 2
5546709: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-12-347-3271
Retaining Strap

123473271
2800130008: RNCC: 3 | RNVC: 2

26 Nov 1998

5340-12-181-2100
Ball Socket Seat

121812100
0009911622: RNCC: 3 | RNVC: 2
0009911622: RNCC: 5 | RNVC: 2

31 Oct 1979

5340-12-316-6907
Mounting Plate

123166907
51-53207: RNCC: 3 | RNVC: 2

2 Feb 1989

5340-12-320-4400
Dust And Moisture Seal Protective Plug

123204400
620U14B: RNCC: 3 | RNVC: 2
GPN620,U14B: RNCC: 5 | RNVC: 9

15 Jan 1990

5340-12-300-5193
Loop Clamp

123005193
1500S: RNCC: 3 | RNVC: 2
ZT1500S: RNCC: 5 | RNVC: 2
12H4114: RNCC: 5 | RNVC: 2

9 Aug 1984

5340-12-345-0425
Latch Bar

123450425
4SK2070-21: RNCC: 3 | RNVC: 2
0002001307001: RNCC: 5 | RNVC: 2
81669120193: RNCC: 5 | RNVC: 2

26 Jan 1998

5340-12-336-9753
Lock-Release Lever

123369753
2718-000150.000.0: RNCC: 2 | RNVC: 2
2718-000150.000.0: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-12-381-5108
Mounting Bracket

123815108
WEW-5835-21: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-12-191-6020
Resilient Mount

121916020
8-2405.64: RNCC: 2 | RNVC: 2
DIN95363-A30X20-M8X9-M8X16-NR70: RNCC: 2 | RNVC: 2
500031-M8X9-M8X16.NR70.ST: RNCC: 5 | RNVC: 2
8-2405-64: RNCC: 5 | RNVC: 2
8-2405-64: RNCC: 5 | RNVC: 9
8-2405.64: RNCC: 5 | RNVC: 9
8-2405-64: RNCC: 5 | RNVC: 9
VG95363-A30X20-M8X9-M8X16-NR70ST: RNCC: 5 | RNVC: 9

15 Feb 1982

5340-12-157-2832
Double Angle Bracket

121572832
773-204-31: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-361-3041
Snap-In Plain Standoff

123613041
6000010-500010: RNCC: 3 | RNVC: 2

15 Sep 2003

5340-12-171-1609
Helical Compression Spring Retainer

121711609
BK7009: RNCC: 3 | RNVC: 2
81.97120-2008: RNCC: 5 | RNVC: 2
81971202008: RNCC: 5 | RNVC: 2
263A/XII: RNCC: 5 | RNVC: 9
BK7009: RNCC: 5 | RNVC: 9
263A12: RNCC: 5 | RNVC: 9

12 Sep 1977

5340-12-370-4879
Loop Holder

123704879
13086: RNCC: 3 | RNVC: 2

14 Nov 2006

5340-12-360-0970
Mounting Plate

123600970
9418810311: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-170-5239
Loop Clamp

121705239
HNY12V: RNCC: 3 | RNVC: 2
211-65129: RNCC: 5 | RNVC: 2
203012101: RNCC: 5 | RNVC: 9

20 Jul 1977

5340-12-367-5457
Mounting Bracket

123675457
H10699: RNCC: 3 | RNVC: 2

31 Aug 2005

5340-12-352-1463
Mounting Bracket

123521463
5205288: RNCC: 3 | RNVC: 2

20 Oct 2000

5340-12-149-1173
Mending Plate

121491173
521L02025: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-358-7726
Manual Control Lever

123587726
3813172374: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-12-364-3876
Mounting Bracket

123643876
T661P1002222: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-356-1858
Section Block Clamp

123561858
JN0413DD34: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-022-6193

5340-12-352-1474
Mounting Bracket

123521474
2995.08.70: RNCC: 2 | RNVC: 2
2995.08.70: RNCC: 3 | RNVC: 2
2995.0870: RNCC: 5 | RNVC: 2

20 Oct 2000

5340-12-385-7606
Access Cover

123857606
5550740008: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-12-351-8876
Mending Plate

123518876
5400051-766700.01: RNCC: 2 | RNVC: 2
5400051-766700.01: RNCC: 3 | RNVC: 2

8 Sep 2000

5340-12-358-8837
Mounting Plate

123588837
2405220: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-310-0561
Mending Plate

123100561
6227092: RNCC: 3 | RNVC: 2

2 Apr 1987

5340-12-322-0090
Mending Plate

123220090
2782-363000.009.0: RNCC: 2 | RNVC: 2
2782-363000.009.0: RNCC: 3 | RNVC: 2

17 Jul 1990

5340-12-336-2863
Mechanic Equipment Hardware Kit

123362863
8607 633 101: RNCC: 3 | RNVC: 2
8607633101: RNCC: 5 | RNVC: 9

7 Nov 1994

5340-12-385-6554
Mounting Bracket

123856554
X004392: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-12-393-3395
Mounting Bracket

123933395
4374700181: RNCC: 3 | RNVC: 2

10 Sep 2013

5340-12-043-3587

5340-12-190-4814
Electrical-Mechanical Equipment Post

121904814
CF 215 063: RNCC: 3 | RNVC: 2
CF215063: RNCC: 5 | RNVC: 2
CF215063: RNCC: 5 | RNVC: 2
CF 215 063: RNCC: 5 | RNVC: 2

1 Dec 1981

5340-12-184-9128
Dust And Moisture Seal Protective Cap-Plug

121849128
610U15: RNCC: 3 | RNVC: 2
GPN610U15: RNCC: 5 | RNVC: 2
610001500: RNCC: 5 | RNVC: 9
U15: RNCC: 5 | RNVC: 9
U15GPN610: RNCC: 5 | RNVC: 9
GPN610,U15: RNCC: 5 | RNVC: 9

28 Aug 1980

5340-12-321-1356
Mounting Plate

123211356
2300034-230330.14: RNCC: 2 | RNVC: 2

2 Apr 1990

5340-12-195-8053
Angle Bracket

121958053
160-73150: RNCC: 3 | RNVC: 2
160-73150: RNCC: 5 | RNVC: 9

19 Apr 1983

5340-12-136-4061

5340-12-354-3892
Double Angle Bracket

123543892
J53230660-015: RNCC: 3 | RNVC: 2

6 Jul 2001

5340-12-361-6988
Mounting Bracket

123616988
J28230206-405: RNCC: 3 | RNVC: 2

5 Nov 2003

5340-12-199-3808
Nut And Bolt Locking Plate

121993808
2300109-018300.016.0: RNCC: 2 | RNVC: 2
2300109-018300.016.0: RNCC: 3 | RNVC: 2
2300109-018300-016-0: RNCC: 5 | RNVC: 2
2300109-018300-016-0: RNCC: 5 | RNVC: 9
2300109-018300.016.0: RNCC: 5 | RNVC: 9

19 Apr 1984

5340-12-346-7609
Handwheel

123467609
209-1080 10: RNCC: 3 | RNVC: 2

8 Sep 1998

5340-12-181-9935
Dust And Moisture Seal Protective Cap-Plug

121819935
3403528722: RNCC: 3 | RNVC: 2
5801506-7069-001: RNCC: 5 | RNVC: 9
34035 28722: RNCC: 5 | RNVC: 9

4 Jan 1980

5340-12-310-7787
Lock-Release Lever

123107787
79795: RNCC: 3 | RNVC: 2
355575: RNCC: 5 | RNVC: 2

30 Jun 1987

5340-12-374-7632
Dust And Moisture Seal Protective Cap

123747632
K27: RNCC: 3 | RNVC: 2
7081336: RNCC: 5 | RNVC: 2

17 Mar 2008

5340-12-332-6294
Access Cover

123326294
81427510016: RNCC: 2 | RNVC: 2
81427510016: RNCC: 3 | RNVC: 2
81.42751.0016: RNCC: 5 | RNVC: 2

31 Aug 1993

5340-12-388-2328
Mechanical Stop

123882328
867007104: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-12-349-1094
Mending Plate

123491094
181088103: RNCC: 3 | RNVC: 2
18 108 8103: RNCC: 5 | RNVC: 2

27 Sep 1999

5340-12-388-4474
Section Block Clamp

123884474
5849950868: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-181-4237
Platte

121814237
81252450087: RNCC: 3 | RNVC: 2

22 Nov 1979

5340-12-197-0766
Headless Straight Rod

121970766
4358577215: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-12-172-1240
Clamp Bolt Assembly

121721240
N00A0400230504B: RNCC: 3 | RNVC: 2
00004230504B: RNCC: 5 | RNVC: 2
00004230504B: RNCC: 5 | RNVC: 9
N00A0400230504B: RNCC: 5 | RNVC: 9

22 Dec 1977

5340-12-358-1715
Access Cover

123581715
3074211020: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-12-368-2513
Flush Lock

123682513
6.101.027.00: RNCC: 3 | RNVC: 2

17 Jan 2006

5340-12-409-4008

5340-12-417-5983

5340-12-127-1811
Pipe Bracket

121271811
3159950301: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-314-2043
Mending Plate

123142043
272.317 731: RNCC: 2 | RNVC: 2
272.317.731: RNCC: 3 | RNVC: 2
272.317 731: RNCC: 5 | RNVC: 9

16 Jun 1988

5340-12-373-6527
Mounting Bracket

123736527
X00010032: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-12-366-4461
Angle Bracket

123664461
4000004-990100.002: RNCC: 2 | RNVC: 2
4000004-990100.002: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-12-184-8912
Manual Control Handle

121848912
CF205380AX: RNCC: 3 | RNVC: 2
CF 205 380 AX: RNCC: 5 | RNVC: 2
CF205380AX: RNCC: 5 | RNVC: 2
CF 205 380 AX: RNCC: 5 | RNVC: 2

26 Aug 1980

5340-12-159-9347
Loop Clamp

121599347
1213-321: RNCC: 3 | RNVC: 2
1213-321: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-304-4309
Dust And Moisture Seal Protective Cap

123044309
4/0953/7010/1: RNCC: 2 | RNVC: 2
4/0953/7010/1: RNCC: 3 | RNVC: 2

17 Jul 1985

5340-12-159-0131
Angle Bracket

121590131
3421332000: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-378-0604
Flush Catch

123780604
C5-V-8471-NZ: RNCC: 3 | RNVC: 2

10 Mar 2009

5340-12-324-0203
Mending Plate

123240203
754-431000-902-0: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-12-310-3511
Handle Grip

123103511
38012-0400.02: RNCC: 2 | RNVC: 2
38012-0400.02: RNCC: 3 | RNVC: 2
38012-0400.02: RNCC: 5 | RNVC: 9

13 May 1987

5340-12-152-9702
Friction Catch Stud

121529702
6030056: RNCC: 3 | RNVC: 2
151.466: RNCC: 5 | RNVC: 2
0069014: RNCC: 5 | RNVC: 2
2638-852: RNCC: 5 | RNVC: 2
N3063: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-322-5460
Angle Bracket

123225460
20-5140-032: RNCC: 3 | RNVC: 2

30 Aug 1990

5340-12-361-7900
Spring Loaded Cylinder Fastener

123617900
GN-607.1-8-AK: RNCC: 3 | RNVC: 2

18 Nov 2003

5340-12-337-2304
Mounting Plate

123372304
615.06-01-02-00-012: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-164-5432
Helical Compression Spring Seat

121645432
23290-181238.003: RNCC: 2 | RNVC: 2
23290-181238.003: RNCC: 3 | RNVC: 2
23290-181238.003: RNCC: 5 | RNVC: 9
23290-181238-003: RNCC: 5 | RNVC: 9
23290-181238.003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-7753
Webbing Strap

121887753
5801479-3253: RNCC: 2 | RNVC: 2
5801479-3253: RNCC: 3 | RNVC: 2
5801479-3253: RNCC: 5 | RNVC: 9
000-F5-25X2,0X550-PE-RAL6031: RNCC: 6 | RNVC: 9

29 Jul 1981

5340-12-132-7053
Expansion Plug

121327053
DIN443-32-ST-PHR: RNCC: 2 | RNVC: 2
06150900222: RNCC: 3 | RNVC: 2
0630 361 039: RNCC: 3 | RNVC: 2
01124656: RNCC: 5 | RNVC: 2
32DIN443PHR: RNCC: 5 | RNVC: 2
0630361039: RNCC: 5 | RNVC: 2
06.15090.0222: RNCC: 5 | RNVC: 2
0630361039: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-375-2241
Double Angle Bracket

123752241
L243M3021211: RNCC: 3 | RNVC: 2

6 May 2008

5340-12-331-5587
Webbing Strap

123315587
1475-9713.13: RNCC: 3 | RNVC: 2
1475-9713.13: RNCC: 5 | RNVC: 2

19 May 1993

5340-12-346-4769
Runner

123464769
1751208MZB: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-12-360-5273
Spring Tension Clip

123605273
JN1121R: RNCC: 3 | RNVC: 2

3 Jun 2003

5340-12-185-0484
Electrical-Mechanical Equipment Post

121850484
MB0882204: RNCC: 3 | RNVC: 2

6 Sep 1980

5340-12-359-0452
Dust And Moisture Seal Protective Plug

123590452
8552120000: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-181-9539
Butt Hinge Leaf

121819539
01TC31816: RNCC: 3 | RNVC: 2

28 Dec 1979

5340-12-180-9547
Nonmetallic Bumper

121809547
6083330014: RNCC: 3 | RNVC: 2

12 Oct 1979

5340-12-379-7962
Loop Clamp

123797962
05551912: RNCC: 3 | RNVC: 2
05551912: RNCC: 5 | RNVC: 2
CV168740: RNCC: 5 | RNVC: 2

2 Sep 2009

5340-12-044-4698

5340-12-302-9811
Mending Plate

123029811
2300147-262900.001.0: RNCC: 2 | RNVC: 2
2300147-262900.001.0: RNCC: 3 | RNVC: 2
2300147-262900-001-0: RNCC: 5 | RNVC: 9
2300147-262900.001.0: RNCC: 5 | RNVC: 9

15 Feb 1985

5340-12-353-4358
Cushioning Pad

123534358
2300232-189090.002.0: RNCC: 2 | RNVC: 2
2300232-189080.002.0: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-12-326-6570
Angle Bracket

123266570
957-811100.05.0: RNCC: 3 | RNVC: 2

18 Oct 1991

5340-12-702-3645
Butt Hinge

127023645
VG95211-ML-127023645: RNCC: 2 | RNVC: 2
5.12.0200.1740.91: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-362-8573
Mounting Bracket

123628573
70369-002: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-12-700-8533
Loop Clamp

127008533
VG95211-ML-127008533: RNCC: 2 | RNVC: 2
155N1119-580: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-310-3512
Pipe Bracket

123103512
38012-0430: RNCC: 2 | RNVC: 2
38012-0430: RNCC: 3 | RNVC: 2
38012-0430: RNCC: 5 | RNVC: 9

13 May 1987

5340-12-365-2602
Verbindungsstueck

123652602
300.014.710: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-189-7534
Rod End Connector

121897534
3002EHV1013001: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-12-339-0148
Helical Compression Spring Seat

123390148
43907: RNCC: 3 | RNVC: 2

27 Sep 1995

5340-12-318-3146
Loop Clamp

123183146
0121 8534: RNCC: 3 | RNVC: 2
1218534EF8932-23: RNCC: 5 | RNVC: 2

29 Jun 1989

5340-12-315-2565
Angle Bracket

123152565
6243120280: RNCC: 3 | RNVC: 2
624 312 02 80: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-195-4419
Resilient Mount

121954419
5802300019: RNCC: 3 | RNVC: 2

24 Feb 1983

5340-12-010-8233

5340-12-198-3216
Strap Fastener Loop

121983216
1000067-1740POS3: RNCC: 2 | RNVC: 2

13 Jan 1984

5340-12-378-3304
Clamping Catch

123783304
503.205: RNCC: 3 | RNVC: 2
82.66912.0019: RNCC: 5 | RNVC: 2
82669120019: RNCC: 5 | RNVC: 2

30 Mar 2009

5340-12-362-8020
Mounting Plate

123628020
10020922: RNCC: 3 | RNVC: 2

2 Apr 2004

5340-12-378-2276
Mounting Bracket

123782276
41229361: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-12-392-9931
Dust And Moisture Seal Protective Cap

123929931
800364: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-12-314-5219
Angle Bracket

123145219
CF 324 457: RNCC: 2 | RNVC: 2
CF 324 457: RNCC: 3 | RNVC: 2
CF 324 457: RNCC: 5 | RNVC: 2

15 Jul 1988

5340-12-351-7971
Antipilferage Seal

123517971
2420580005: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-12-185-6316
Angle Bracket

121856316
CF304053: RNCC: 3 | RNVC: 2
CF304053: RNCC: 5 | RNVC: 2
CF 304 053: RNCC: 5 | RNVC: 2
CF304053: RNCC: 5 | RNVC: 2
CF 304 053: RNCC: 5 | RNVC: 2

21 Oct 1980

5340-12-197-9127
Angle Bracket

121979127
CF 339 009 C: RNCC: 3 | RNVC: 2
CF 339 009 C: RNCC: 5 | RNVC: 2
CF 339 009 A: RNCC: 5 | RNVC: 9
CF 339 009 B: RNCC: 5 | RNVC: 9
CF 339 009 A: RNCC: 5 | RNVC: 9
CF 339 009 B: RNCC: 5 | RNVC: 9

1 Dec 1983

5340-12-306-2496
Spring Tension Clip

123062496
SK 284: RNCC: 3 | RNVC: 2
0009940760: RNCC: 5 | RNVC: 2
K49258: RNCC: 5 | RNVC: 2

11 Feb 1986

5340-12-199-4147
Double Angle Bracket

121994147
3094280143: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-181-1106
Angle Bracket

121811106
81974850103: RNCC: 3 | RNVC: 2

24 Oct 1979

5340-12-358-8709
Mounting Bracket

123588709
0009911253: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-373-9045
Catch Strike

123739045
025123: RNCC: 3 | RNVC: 2
25123: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-12-305-2933
Metal Runner

123052933
5801758-1311.00: RNCC: 2 | RNVC: 2
018-1311.00: RNCC: 3 | RNVC: 2
5801758-1311.00: RNCC: 3 | RNVC: 2

17 Oct 1985

5340-12-320-7913
Lock-Release Lever

123207913
2300232-205520.000.0: RNCC: 2 | RNVC: 2
2300232-205520.000.0: RNCC: 3 | RNVC: 2
9997023-205520.000.0: RNCC: 5 | RNVC: 2
2300232-205520.000.02: RNCC: 5 | RNVC: 9

16 Feb 1990

5340-12-314-6323
Lock-Release Lever

123146323
948224777: RNCC: 3 | RNVC: 2
3201-641.01.01.002-002: RNCC: 5 | RNVC: 2

23 Jul 1988

5340-12-367-2135
Block Clamp

123672135
J26121003-403: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-12-310-2733
Nonmetallic Bumper

123102733
330347: RNCC: 3 | RNVC: 2
2-V6236A: RNCC: 5 | RNVC: 2

30 Apr 1987

5340-12-376-5496
Loop Clamp

123765496
JN0212-123: RNCC: 3 | RNVC: 2
NH1009810-80: RNCC: 5 | RNVC: 2

15 Oct 2008

5340-12-301-9435
Retaining Strap

123019435
20-4170-047: RNCC: 3 | RNVC: 2

20 Nov 1984

5340-12-193-6143
Nonmetallic Bumper

121936143
VG95092B9X5X19NR60: RNCC: 2 | RNVC: 2
82200-B9X5X19.NR60: RNCC: 3 | RNVC: 2
SCHRAUBPUFFER19X9MM: RNCC: 3 | RNVC: 2
VG95092B9X5X19NR60SCHWARZ: RNCC: 5 | RNVC: 2
B9X5X19.60NR: RNCC: 5 | RNVC: 2

11 Aug 1982

5340-12-302-7665
Angle Bracket

123027665
272.1430.11-08: RNCC: 3 | RNVC: 2

29 Jan 1985

5340-12-319-3183
Spring Tension Clip

123193183
NK1006689-10: RNCC: 3 | RNVC: 2
865660000000: RNCC: 5 | RNVC: 2

22 Sep 1989

5340-12-196-8492
Retaining Band

121968492
588.70-100004-005: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-12-188-7116
Access Cover

121887116
36 866-001: RNCC: 3 | RNVC: 2
36866-001: RNCC: 5 | RNVC: 2

27 Jul 1981

5340-12-330-1813
Mending Plate

123301813
536077-0520.000: RNCC: 2 | RNVC: 2
536077-0520.000: RNCC: 3 | RNVC: 2
536077-0520.000: RNCC: 5 | RNVC: 9

11 Nov 1992

5340-12-356-7042
Mechanical Stop

123567042
33036-003-009/010: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-196-4889
Angle Bracket

121964889
5801435-050800.02: RNCC: 2 | RNVC: 2
5801435-050800.02: RNCC: 3 | RNVC: 2
5801435-050800-02: RNCC: 5 | RNVC: 2

12 Jul 1983

5340-12-314-9277
Nonmetallic Solid Wheel

123149277
939565577: RNCC: 3 | RNVC: 2
3220-810.06.06.004-001: RNCC: 5 | RNVC: 2

27 Aug 1988

5340-12-301-7655
Nonmetallic Bumper

123017655
4179136: RNCC: 3 | RNVC: 2
1280-033: RNCC: 5 | RNVC: 2
S12B.K02.09.00.004: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-183-1449
Rod End Clevis

121831449
2326101: RNCC: 3 | RNVC: 2

20 Mar 1980

5340-12-128-3622

5340-12-315-7129
Angle Bracket

123157129
51192020078: RNCC: 3 | RNVC: 2
51.19202.0078: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-312-7460
Double Angle Bracket

123127460
1079872: RNCC: 3 | RNVC: 2

2 Feb 1988

5340-12-362-5317
Mounting Bracket

123625317
6122231304: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-304-0932
Mending Plate

123040932
20700.3M22: RNCC: 3 | RNVC: 2

11 Jun 1985

5340-12-173-0887
Double Angle Bracket

121730887
3521550327: RNCC: 3 | RNVC: 2

20 Mar 1978

5340-12-010-4318

5340-12-314-2221
Detent Plunger

123142221
1200096-15B800010: RNCC: 2 | RNVC: 2

17 Jun 1988

5340-12-359-2287
Lock-Release Lever

123592287
06451-3101: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-12-348-6528
Mounting Bracket

123486528
301710: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-12-319-9758
Dust And Moisture Seal Protective Plug Set

123199758
9153460074: RNCC: 3 | RNVC: 2

24 Nov 1989

5340-12-347-2120
Access Cover

123472120
54.1094.173.00: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-12-391-5998
Mechanical Stop

123915998
GE5478G011: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-12-337-8868
Rod End Clevis

123378868
4623901: RNCC: 3 | RNVC: 2
EZ46239: RNCC: 5 | RNVC: 9

27 Apr 1995

5340-12-383-8840
Runner

123838840
MODELL 5013 20.00: RNCC: 3 | RNVC: 2
ML10BW1SI097: RNCC: 5 | RNVC: 2

16 Dec 2010

5340-12-313-8678
Angle Bracket

123138678
4355420640: RNCC: 3 | RNVC: 2
435 542 06 40: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-322-9528
Dust And Moisture Seal Protective Plug

123229528
6739970086: RNCC: 3 | RNVC: 2
673 997 00 86: RNCC: 5 | RNVC: 2

10 Oct 1990

5340-12-392-8888
Angle Bracket

123928888
9169224003: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-12-323-2463
Helical Compression Spring Seat

123232463
1021840031: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-12-196-7003
Butt Hinge Leaf

121967003
20402: RNCC: 3 | RNVC: 2
20402: RNCC: 5 | RNVC: 2

3 Aug 1983

5340-12-334-1110
Loop Clamp

123341110
1221266: RNCC: 3 | RNVC: 2
122 12 66: RNCC: 5 | RNVC: 2

22 Mar 1994

5340-12-303-4366
Door Handle

123034366
1087600561: RNCC: 3 | RNVC: 2

22 Mar 1985

5340-12-011-6156

5340-12-317-2647
Dust And Moisture Seal Protective Cap

123172647
11.00553: RNCC: 3 | RNVC: 2

22 Mar 1989

5340-12-341-4041
Angle Bracket

123414041
434979: RNCC: 3 | RNVC: 2
0434979: RNCC: 5 | RNVC: 2

31 Aug 1996

5340-12-306-6212
Ball Socket Seat

123066212
030 013 003 007: RNCC: 3 | RNVC: 2
030013003007: RNCC: 3 | RNVC: 2
000 338 07 27: RNCC: 5 | RNVC: 2
0003380727: RNCC: 5 | RNVC: 2

14 Mar 1986

5340-12-334-8800
Protection Bellows

123348800
8599970480: RNCC: 3 | RNVC: 2
859 997 04 80: RNCC: 5 | RNVC: 2

30 Jun 1994

5340-12-357-9004
Dust And Moisture Seal Protective Cap

123579004
13963101: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-382-3092
Webbing Strap

123823092
2500171-421200.00: RNCC: 2 | RNVC: 2
2500171-421200.00: RNCC: 3 | RNVC: 2
2500171-421200.00: RNCC: 5 | RNVC: 9

2 Jun 2010

5340-12-351-3842
Runner

123513842
10063-311500: RNCC: 3 | RNVC: 2
10063-311500: RNCC: 5 | RNVC: 9

20 Jul 2000

5340-12-351-2183
Spring Tension Clip

123512183
5800.6260: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-358-3286
Angle Bracket

123583286
2500262-000800.008.0: RNCC: 2 | RNVC: 2
2500262-000800.008.0: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-12-350-1497
Retaining Strap

123501497
N/S1-6/406/1: RNCC: 3 | RNVC: 2
S/1-6/406/1: RNCC: 5 | RNVC: 2

21 Feb 2000

5340-12-171-0320
Retaining Strap

121710320
81974010699: RNCC: 3 | RNVC: 2
81.97401.0699: RNCC: 5 | RNVC: 2
23250-144616-002-0: RNCC: 5 | RNVC: 9

1 Sep 1977

5340-12-148-9965
Resilient Mount

121489965
7-29-6-04-00-19-01: RNCC: 3 | RNVC: 2
15SK0288: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-383-9843
Mounting Plate

123839843
82669100012: RNCC: 3 | RNVC: 2

5 Jan 2011

5340-12-302-5692
Kunst Gleitschiene

123025692
92.263.85.257: RNCC: 3 | RNVC: 2
0008350180: RNCC: 5 | RNVC: 2

14 Jan 1985

5340-12-172-1470
Nonmetallic Solid Wheel

121721470
153BP180-55: RNCC: 3 | RNVC: 2

22 Dec 1977

5340-12-387-4667
Loop Clamp

123874667
1K0253725: RNCC: 3 | RNVC: 2

21 Dec 2011

5340-12-199-2771
Pipe Bracket

121992771
114M14702: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-12-373-5953
Hand Crank

123735953
JSU03: RNCC: 3 | RNVC: 2

20 Nov 2007

5340-12-154-4993

5340-12-348-3478
Retaining Bail

123483478
209581: RNCC: 3 | RNVC: 2
4258990032: RNCC: 5 | RNVC: 2

4 Jun 1999

5340-12-317-0192
Cane Bolt

123170192
1747754: RNCC: 3 | RNVC: 2
75E10.90.73: RNCC: 5 | RNVC: 2

3 Mar 1989

5340-12-333-4454
Resilient Mount

123334454
0002352990: RNCC: 3 | RNVC: 2
0002352990: RNCC: 5 | RNVC: 2

16 Dec 1993

5340-12-043-9894

5340-12-132-8910

5340-12-197-0010

5340-12-179-6002
Resilient Mount

121796002
3378905001: RNCC: 3 | RNVC: 2

11 Jul 1979

5340-12-300-3132
Butt Hinge Leaf

123003132
3097540220: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-332-8410
Mounting Bracket

123328410
81517105276: RNCC: 3 | RNVC: 2
81.51710.5276: RNCC: 5 | RNVC: 2

24 Sep 1993

5340-12-148-4841

5340-12-317-3487
Retaining Strap

123173487
136M27741: RNCC: 3 | RNVC: 2

30 Mar 1989

5340-12-373-3422
Section Block Clamp

123733422
L134M3201205: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-12-197-8472
Double Angle Bracket

121978472
107831: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-12-360-0075
Mounting Bracket

123600075
9415422340: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-328-9565
Electrical-Mechanical Equipment Post

123289565
VG95148C5,5XM3X13,5-ST: RNCC: 2 | RNVC: 2
VG95148C5,5X0MX13,5-ST: RNCC: 3 | RNVC: 2
5.13.134: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-330-5745
Dust And Moisture Seal Protective Plug

123305745
7410.0.07.00: RNCC: 3 | RNVC: 2
260Q3535: RNCC: 3 | RNVC: 2
V35X35L,86SCHWARZ: RNCC: 3 | RNVC: 2
6.368-105.0: RNCC: 5 | RNVC: 2
GPN260Q3535: RNCC: 5 | RNVC: 2
6.368-105: RNCC: 5 | RNVC: 9

12 Jan 1993

5340-12-196-9995
Webbing Strap

121969995
4900059-342022.000.0: RNCC: 2 | RNVC: 2
4900059-342022.000.0: RNCC: 3 | RNVC: 2
4900059-342022.000.0: RNCC: 3 | RNVC: 2
01803-2-FE1660SCHLA-LE1370-01244: RNCC: 3 | RNVC: 2
4900059-342022.000.0: RNCC: 3 | RNVC: 2
221-00-359-3: RNCC: 3 | RNVC: 2
79016/SCHLAUFE/047-2880-1660: RNCC: 3 | RNVC: 2
4900059-342022-000-0: RNCC: 5 | RNVC: 2
221-00-359-3: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-702-3707
Metal Grille

127023707
VG95211-ML-127023707: RNCC: 2 | RNVC: 2
5.12.3450.1000.23: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-4194
Angle Bracket

127024194
VG95211-ML-127024194: RNCC: 2 | RNVC: 2
5.12.7070.1190.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-1532
Mounting Bracket

127011532
VG95211-ML-127011532: RNCC: 2 | RNVC: 2
5.12.0220.1403.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-8017
Angle Bracket

127018017
VG95211-ML-127018017: RNCC: 2 | RNVC: 2
5.12.8102.7930.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-363-5172
Mounting Bracket

123635172
SK796-034000.001.0: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-392-7497
Bridge Clamp

123927497
10187-003230.001.0: RNCC: 2 | RNVC: 2
10187-003230.001.0: RNCC: 3 | RNVC: 2

4 Jul 2013

5340-12-128-9092
Retaining Strap

121289092
1216 8426: RNCC: 3 | RNVC: 2
12168426: RNCC: 5 | RNVC: 9
6-420-0-977-004-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-3669
Mounting Plate

127013669
VG95211-ML-127013669: RNCC: 2 | RNVC: 2
5.12.5302.1560.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-365-3733
Mounting Bracket

123653733
2500267-065915.000.0: RNCC: 2 | RNVC: 2
2500267-065915.000.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-373-4502
Nonmetallic Bumper

123734502
01278153: RNCC: 3 | RNVC: 2

5 Nov 2007

5340-12-379-9073
Bumper

123799073
06143136: RNCC: 3 | RNVC: 2
CV168939: RNCC: 5 | RNVC: 2
06143136: RNCC: 5 | RNVC: 2

10 Sep 2009

5340-12-177-2946
Rod End Clevis

121772946
81437400150: RNCC: 3 | RNVC: 2
81437400071: RNCC: 5 | RNVC: 9

24 Jan 1979

5340-12-346-3317
Mounting Bracket

123463317
T623M2301101: RNCC: 3 | RNVC: 2

13 Jul 1998

5340-12-357-5140
Dust And Moisture Seal Protective Cap

123575140
342.23.900: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-12-388-5419
Mounting Bracket

123885419
5842000840: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-12-387-5891
Filler Opening Cap

123875891
165.07321: RNCC: 3 | RNVC: 2

12 Jan 2012

5340-12-122-1370

5340-12-152-2706

5340-12-194-0206
Butt Hinge Leaf

121940206
120.80057: RNCC: 3 | RNVC: 2
12080057: RNCC: 5 | RNVC: 2

23 Sep 1982

5340-12-163-0801
Folding Stay

121630801
319142VERZINKT: RNCC: 3 | RNVC: 9

30 May 1969

5340-12-333-7518
Access Cover

123337518
15 0004 484: RNCC: 2 | RNVC: 2
15 0004 484: RNCC: 3 | RNVC: 2

1 Feb 1994

5340-12-327-8247
Mounting Bracket

123278247
KS2976: RNCC: 3 | RNVC: 2
991.00.18.0702: RNCC: 5 | RNVC: 9

10 Mar 1992

5340-12-196-3197
Butt Hinge Leaf

121963197
100109-6096: RNCC: 2 | RNVC: 2
100109-6096: RNCC: 3 | RNVC: 2
100109-6096: RNCC: 5 | RNVC: 2
100109-6096: RNCC: 5 | RNVC: 9

27 Jun 1983

5340-12-315-9006
Mending Plate

123159006
397T21004: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-12-126-3507

5340-12-360-0430
Dust And Moisture Seal Protective Cap

123600430
9415250238: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-391-2460
Retaining Strap

123912460
00011655: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-12-364-2602
Mounting Bracket

123642602
4372670440: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-349-9903
Loop Clamp

123499903
81974200157: RNCC: 3 | RNVC: 2
81.97420.0157: RNCC: 5 | RNVC: 2

3 Feb 2000

5340-12-352-9880
Access Cover

123529880
M01906: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-392-4347
Clamp Bracket

123924347
6625830066: RNCC: 3 | RNVC: 2

7 Jun 2013

5340-12-344-1078
Mounting Bracket

123441078
2300421-330012.000: RNCC: 2 | RNVC: 2
9919518: RNCC: 3 | RNVC: 2
2300421-330012.000: RNCC: 5 | RNVC: 2
2300421-330012.000: RNCC: 5 | RNVC: 9
9919518: RNCC: 5 | RNVC: 9

12 Sep 1997

5340-12-159-6176
Thumb Latch

121596176
015560: RNCC: 3 | RNVC: 2
249-41793: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-339-7532

5340-12-339-7167
Butt Hinge Leaf

123397167
2500255-191703.000.0: RNCC: 2 | RNVC: 2
2500255-191703.000.0: RNCC: 3 | RNVC: 2

3 Jan 1996

5340-12-700-8371
Butt Hinge

127008371
VG95211-ML-127008371: RNCC: 2 | RNVC: 2
1-2-1-100 OST1 11181-77: RNCC: 3 | RNVC: 2

6 Feb 1995

Load More Results