What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 46 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 46 of 178

5340-12-355-1786
Mounting Bracket

123551786
VG95211-ML-123551786: RNCC: 2 | RNVC: 2
5.12.0246.0460.92: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-12-322-0204
Access Cover

123220204
43111-002: RNCC: 3 | RNVC: 2
43 111-002: RNCC: 5 | RNVC: 9

18 Jul 1990

5340-12-371-2697
Retaining Strap

123712697
2300397-060000.017.0: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-12-305-5000
Door Button

123055000
DIN7463-A2-6-BK: RNCC: 2 | RNVC: 2
06430200108: RNCC: 3 | RNVC: 2
A2-6DIN7463-ROH: RNCC: 5 | RNVC: 2
DIN7463-A2-6BK: RNCC: 5 | RNVC: 2

14 Nov 1985

5340-12-199-5456
Nonmetallic Bumper

121995456
2500057-500000.05: RNCC: 2 | RNVC: 2
2500057-500000.05: RNCC: 3 | RNVC: 2
2500057-500000.05: RNCC: 3 | RNVC: 2
2500057-500000.05: RNCC: 3 | RNVC: 2
PLATTE 250X75X3 MIT LOCH-CR75: RNCC: 5 | RNVC: 2
2500057-500000-05: RNCC: 5 | RNVC: 9

10 May 1984

5340-12-173-7909
Loop Clamp

121737909
PAN4264-08: RNCC: 3 | RNVC: 2

16 May 1978

5340-12-309-3118
Retaining Strap

123093118
23111-190100.14: RNCC: 2 | RNVC: 2
23111-190100.14: RNCC: 3 | RNVC: 2
23111-190100.14: RNCC: 5 | RNVC: 9
9869320: RNCC: 5 | RNVC: 9

13 Jan 1987

5340-12-309-5623
Mending Plate

123095623
5802261-400000.001: RNCC: 2 | RNVC: 2
5802261-400000.001: RNCC: 5 | RNVC: 9

4 Feb 1987

5340-12-196-8334
Angle Bracket

121968334
588.70-510200-006: RNCC: 3 | RNVC: 2

23 Aug 1983

5340-12-194-5356
Clamping Catch

121945356
4200078-10640: RNCC: 2 | RNVC: 2
4200078-10640: RNCC: 3 | RNVC: 2
TG6080-10640: RNCC: 3 | RNVC: 2
6080-10640: RNCC: 5 | RNVC: 2
4200078-10640: RNCC: 5 | RNVC: 9
4200078-10640: RNCC: 5 | RNVC: 9

15 Nov 1982

5340-12-145-2823
Helical Compression Spring Seat

121452823
2345-24810-02: RNCC: 2 | RNVC: 2
2345-24810.02: RNCC: 2 | RNVC: 2
2345-24810.02: RNCC: 3 | RNVC: 2
2345-24810-02: RNCC: 5 | RNVC: 2
2345-24810-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-9950
Nonmetallic Bumper

123189950
2654-336220.03: RNCC: 2 | RNVC: 2
2654-336220.03: RNCC: 5 | RNVC: 2
679-08020200.03: RNCC: 5 | RNVC: 9
679-08020200.03: RNCC: 5 | RNVC: 9
2654-336 220.03: RNCC: 5 | RNVC: 9
2654-336 220.03: RNCC: 5 | RNVC: 9
2654-336 220.03: RNCC: 5 | RNVC: 9

30 Aug 1989

5340-12-349-5876
Mending Plate

123495876
81974880205: RNCC: 3 | RNVC: 2
81.97488-0205: RNCC: 5 | RNVC: 2

7 Dec 1999

5340-12-384-3981
Roller Holder

123843981
F1.1189-30-10-10.00-43: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-12-317-1653
Angle Bracket

123171653
C249-A10-B12: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-12-193-5329
Leather Strap

121935329
4617700585: RNCC: 3 | RNVC: 2
726 1 77 222 2: RNCC: 5 | RNVC: 9

2 Aug 1982

5340-12-702-6310
Retaining Bail

127026310
VG95211-ML-127026310: RNCC: 2 | RNVC: 2
83.7240.732: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-360-6039
Webbing Strap

123606039
6.373-649.0: RNCC: 3 | RNVC: 2

13 Jun 2003

5340-12-331-2721
Retaining Strap

123312721
1203 1397: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-12-351-7533
Dust And Moisture Seal Protective Cap

123517533
81653054014: RNCC: 3 | RNVC: 2

18 Aug 2000

5340-12-391-6226
Dust And Moisture Seal Protective Plug

123916226
I009966: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-12-360-9929
Access Cover

123609929
15079401: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-341-6519
Double Angle Bracket

123416519
03591400: RNCC: 3 | RNVC: 2
03591400.532: RNCC: 5 | RNVC: 2

10 Oct 1996

5340-12-094-0812

5340-12-311-8451
Access Cover

123118451
2300074-4701.04: RNCC: 2 | RNVC: 2
2300074-4701.04: RNCC: 3 | RNVC: 2
2300074-4701.04: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-344-4046
Buckle

123444046
R51728: RNCC: 3 | RNVC: 2
R51728: RNCC: 5 | RNVC: 2

23 Oct 1997

5340-12-010-2329

5340-12-040-6193

5340-12-311-8977
Dust And Moisture Seal Protective Cap

123118977
166028: RNCC: 2 | RNVC: 2
166028: RNCC: 3 | RNVC: 2

28 Oct 1987

5340-12-310-9753
Retaining Strap

123109753
03684200: RNCC: 3 | RNVC: 2

14 Jul 1987

5340-12-366-1772
Spacing Threaded Standoff

123661772
279.663 641: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-12-394-1487
Rim Lock

123941487
24.00.176: RNCC: 3 | RNVC: 2

7 Nov 2013

5340-12-184-9281
Double Angle Bracket

121849281
5562490: RNCC: 3 | RNVC: 2

28 Aug 1980

5340-12-171-8629
Flush Lock

121718629
6020002: RNCC: 3 | RNVC: 2
N92214K3: RNCC: 5 | RNVC: 2
01238763: RNCC: 5 | RNVC: 2
1238763KZ8935-38: RNCC: 5 | RNVC: 2
0022511007: RNCC: 5 | RNVC: 2
0022511007: RNCC: 5 | RNVC: 2

22 Nov 1977

5340-12-391-4804
Mounting Plate

123914804
I005758: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-175-2296
Webbing Strap

121752296
4047900096: RNCC: 3 | RNVC: 2

4 Sep 1978

5340-12-342-8965
Butt Hinge

123428965
4303610040: RNCC: 3 | RNVC: 2

14 Apr 1997

5340-12-351-1818
Angle Bracket

123511818
2300387-403035.000: RNCC: 2 | RNVC: 2
9914866: RNCC: 3 | RNVC: 2
9914866: RNCC: 5 | RNVC: 9
2300387-403035.000: RNCC: 5 | RNVC: 9

29 Jun 2000

5340-12-122-9154
Nonmetallic Bumper

121229154
211841691A: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-027-1031

5340-12-320-8198
Loop Clamp

123208198
DKS2: RNCC: 3 | RNVC: 2
5L.4595.013.63: RNCC: 5 | RNVC: 2
5L.4595.013.63: RNCC: 5 | RNVC: 2

20 Feb 1990

5340-12-043-2686

5340-12-332-1296
Flush Lock

123321296
1H4839015A: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-305-1285
Dust And Moisture Seal Protective Cap

123051285
158404: RNCC: 2 | RNVC: 2
158404: RNCC: 3 | RNVC: 2

30 Sep 1985

5340-12-333-4086
Manual Control Lever

123334086
050071: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-305-5669
Angle Bracket

123055669
3274925419: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-027-9772

5340-12-318-9020
Butt Hinge

123189020
731.06.023: RNCC: 3 | RNVC: 2
V731.06.023: RNCC: 5 | RNVC: 2

24 Aug 1989

5340-12-356-7487
Angle Bracket

123567487
T622M1303101: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-197-4778
Retaining Strap

121974778
YK8TH9121: RNCC: 3 | RNVC: 2
8TH9121: RNCC: 5 | RNVC: 9

25 Oct 1983

5340-12-347-2114
Support Hook

123472114
54.1100.187.00: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-12-318-8471
Retaining Strap

123188471
200200.0705.000: RNCC: 3 | RNVC: 2
2002.07.05.000: RNCC: 3 | RNVC: 9

22 Aug 1989

5340-12-177-3531
Ball Socket Seat

121773531
4069910022: RNCC: 3 | RNVC: 2
A406 991 00 22: RNCC: 5 | RNVC: 2

29 Jan 1979

5340-12-176-3640
Retaining Strap

121763640
181955239: RNCC: 3 | RNVC: 2

27 Nov 1978

5340-12-320-1335
Kunst Gleitschiene

123201335
0679301: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-312-1122
Mounting Plate

123121122
6600176: RNCC: 2 | RNVC: 2

24 Nov 1987

5340-12-300-6622
Elbow Catch

123006622
1000091-3400: RNCC: 2 | RNVC: 2
1000091-3400: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-365-8822
Manual Control Handle

123658822
105-41225: RNCC: 3 | RNVC: 2

16 Feb 2005

5340-12-174-2355
Bow Handle

121742355
61L2-1-1AA: RNCC: 3 | RNVC: 2
13910198-3: RNCC: 5 | RNVC: 2
5M.3731.220.07: RNCC: 5 | RNVC: 2
5M3731-220-07: RNCC: 5 | RNVC: 9
85-691-4007: RNCC: 6 | RNVC: 9

15 Jun 1978

5340-12-394-1051
Spring Tension Clip

123941051
SK961-181551.000.0: RNCC: 3 | RNVC: 2
83130706: RNCC: 6 | RNVC: 9

5 Nov 2013

5340-12-190-2782
Loop Clamp

121902782
DIN3016-2-G1-32X15-W5: RNCC: 2 | RNVC: 2
SP32/15SKZ-W5: RNCC: 3 | RNVC: 2
DIN3016-G1-32X15-W5: RNCC: 3 | RNVC: 2
SP32-15SKZ1-4571: RNCC: 5 | RNVC: 2
SP32/15SKZ-1.4571: RNCC: 5 | RNVC: 2
1410700032: RNCC: 5 | RNVC: 2
VG95931-G32X15-W5: RNCC: 5 | RNVC: 9
VG95931G32X15-W5: RNCC: 5 | RNVC: 9
DIN3016-G1-32X15-W5: RNCC: 5 | RNVC: 9

17 Nov 1981

5340-12-301-2040
Angle Bracket

123012040
A-245476-755: RNCC: 3 | RNVC: 2
A245476-755: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-702-5771
Mounting Bracket

127025771
VG95211-ML-127025771: RNCC: 2 | RNVC: 2
5.51.7802.0010.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-325-3577
Electrical-Mechanical Equipment Post

123253577
VG95148C7XM4X10-2.0380.30-E3E: RNCC: 2 | RNVC: 2
DISTIN-4070-M-10: RNCC: 3 | RNVC: 2
26019010040: RNCC: 5 | RNVC: 2
C 3822 220 MN: RNCC: 5 | RNVC: 2
C3822220MN: RNCC: 5 | RNVC: 2
C 3822 220 MN: RNCC: 5 | RNVC: 2
C3822220MN: RNCC: 5 | RNVC: 2

28 May 1991

5340-12-342-4494
Webbing Strap

123424494
A 1326-1600: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-12-378-2805
Loop Clamp

123782805
DIN3016-1-A1-11X15-W5: RNCC: 2 | RNVC: 2

25 Mar 2009

5340-12-146-8712
Helical Compression Spring Retainer

121468712
2360-100031.06.0: RNCC: 2 | RNVC: 2
5077 329 032: RNCC: 3 | RNVC: 2
2360-100031-06-0: RNCC: 5 | RNVC: 2
2360-100031.06.0: RNCC: 5 | RNVC: 2
5077329032: RNCC: 5 | RNVC: 2
2360-100031-06-0: RNCC: 5 | RNVC: 2
2360-100031.06.0: RNCC: 5 | RNVC: 2
13812500031: RNCC: 5 | RNVC: 9
2360-100031-06-0: RNCC: 5 | RNVC: 9
2360-100031.06.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-143-0044
Resilient Mount

121430044
DIN95363-F25X20-NR45ST: RNCC: 2 | RNVC: 2
1.25.20.2C.45NR/ST: RNCC: 5 | RNVC: 2
81180-25X20-M6.NR45.ST: RNCC: 5 | RNVC: 2
BG4-00-24N: RNCC: 5 | RNVC: 9
N1100-36-280: RNCC: 5 | RNVC: 9
VG95363-F25X20-NR45ST: RNCC: 5 | RNVC: 9
VG95363F25X20NR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-5546
Angle Bracket

121975546
P-296801-432: RNCC: 3 | RNVC: 2
P296801-432: RNCC: 5 | RNVC: 2

2 Nov 1983

5340-12-175-0984
Nonmetallic Bumper

121750984
4259870140: RNCC: 3 | RNVC: 2

23 Aug 1978

5340-12-180-0415
Nonmetallic Bumper

121800415
3097230095: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-389-9917
Mounting Plate

123899917
C21743Z091953: RNCC: 3 | RNVC: 2

21 Sep 2012

5340-12-365-4575
Angle Bracket

123654575
3184920841: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-12-337-8491
Access Hole Frame

123378491
10 0050 539: RNCC: 3 | RNVC: 2
100050539: RNCC: 5 | RNVC: 2

24 Apr 1995

5340-12-363-9028
Double Angle Bracket

123639028
251611841G: RNCC: 3 | RNVC: 2

3 Aug 2004

5340-12-167-6520
Butt Hinge Leaf

121676520
LN9372F: RNCC: 2 | RNVC: 2

10 Jan 1977

5340-12-385-5539
Mounting Bracket

123855539
X00041634: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-12-349-7438
Angle Bracket

123497438
T290M2202272: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-165-8575

5340-12-176-7253
Detent Plunger

121767253
WW419161: RNCC: 3 | RNVC: 9
WW 419 161: RNCC: 5 | RNVC: 2
WW419161: RNCC: 5 | RNVC: 2
WW 419 161: RNCC: 5 | RNVC: 9

15 Dec 1978

5340-12-131-5588

5340-12-313-2593
Mounting Bracket

123132593
4220700166: RNCC: 3 | RNVC: 2

16 Mar 1988

5340-12-308-3820
Angle Bracket

123083820
3644801: RNCC: 3 | RNVC: 2
36448 01: RNCC: 5 | RNVC: 2

3 Oct 1986

5340-12-312-3148
Angle Bracket

123123148
2300227-353000.000: RNCC: 2 | RNVC: 2
2300227-353000.000: RNCC: 3 | RNVC: 2

15 Dec 1987

5340-12-386-2601
Retaining Bail

123862601
2500262-195010.000.0: RNCC: 2 | RNVC: 2
2500262-195010.000.0: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-12-191-3844
Metal Runner

121913844
23305-068833.02.0: RNCC: 3 | RNVC: 2
23305-068833.02.0: RNCC: 5 | RNVC: 2
23305-068833.02.0: RNCC: 5 | RNVC: 9

28 Jan 1982

5340-12-313-9135
Bow Handle

123139135
4621-0003: RNCC: 3 | RNVC: 2
208772: RNCC: 5 | RNVC: 2

19 May 1988

5340-12-702-1702
Angle Bracket

127021702
VG95211-ML-127021702: RNCC: 2 | RNVC: 2
30.7109.141: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-360-8419
Retaining Band

123608419
333/01/3009: RNCC: 3 | RNVC: 2

16 Jul 2003

5340-12-343-3288
Leather Strap

123433288
2500166-043000.01: RNCC: 2 | RNVC: 2
2500166-043000.01: RNCC: 3 | RNVC: 2

6 Jun 1997

5340-12-350-8898
Double Angle Bracket

123508898
J27420045-401: RNCC: 3 | RNVC: 2

31 May 2000

5340-12-356-5080
Double Angle Bracket

123565080
J92220347-003: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-177-7200
Webbing Strap

121777200
52-1405-410-12: RNCC: 3 | RNVC: 2

14 Feb 1979

5340-12-362-7281
Nonmetallic Bumper

123627281
5242-026300A01B: RNCC: 3 | RNVC: 2

24 Mar 2004

5340-12-148-9859
Hand Crank

121489859
7-29-7-03-10-05-01: RNCC: 3 | RNVC: 2
109210-2031-005: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-328-6934
Support Hook

123286934
2300232-187070.001.0: RNCC: 2 | RNVC: 2
2300232-187070.001.0: RNCC: 3 | RNVC: 2
2300232-187070.001.0: RNCC: 5 | RNVC: 2
2300109-187050.001.0: RNCC: 5 | RNVC: 2
2300232-187070.001.0: RNCC: 5 | RNVC: 2
2300109-187050.001.0: RNCC: 5 | RNVC: 9

16 Jun 1992

5340-12-314-2525
Loop Clamp

123142525
DIN3015-S-A-2-E-15-PP-W1: RNCC: 2 | RNVC: 2
HRES2S15PP STMBL: RNCC: 3 | RNVC: 2
RCEG1-215: RNCC: 3 | RNVC: 2
SPAL4015PPR-DPAL-AS: RNCC: 3 | RNVC: 2
DIN3015-SA2E-15PP-W1: RNCC: 5 | RNVC: 2
HRE2SS15PP: RNCC: 5 | RNVC: 2
HRES2S15PP ST BL: RNCC: 5 | RNVC: 2
SPAL4015PPR-DPAL-AS: RNCC: 5 | RNVC: 2
RCEG1-215: RNCC: 5 | RNVC: 2

21 Jun 1988

5340-12-304-4800
Hand Crank

123044800
272.1193.0421-00: RNCC: 3 | RNVC: 2

23 Jul 1985

5340-12-173-5119
Angle Bracket

121735119
23176-171000.01.0: RNCC: 2 | RNVC: 2
23176-171000.01.0: RNCC: 3 | RNVC: 2
23176-171000-01-0: RNCC: 5 | RNVC: 9
23176-171000.01.0: RNCC: 5 | RNVC: 9
23176-171000-01-0: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-12-702-5369
Angle Bracket

127025369
VG95211-ML-127025369: RNCC: 2 | RNVC: 2
5.51.7204.0810.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-361-5070
Clamping Catch

123615070
6004-U-30JB: RNCC: 3 | RNVC: 2

9 Oct 2003

5340-12-196-9846
Mending Plate

121969846
4900059-323410.003.0: RNCC: 3 | RNVC: 2
4900059-323410-003-0: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-388-1756
Retaining Strap

123881756
MMN325-2/2D9-10-S235JR: RNCC: 2 | RNVC: 2
700325010108: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-12-340-1726
Lock-Release Lever

123401726
NO PRIMARY REF 12-340-1726: RNCC: 3 | RNVC: 2
5784160: RNCC: 5 | RNVC: 2
5784160-001: RNCC: 5 | RNVC: 2
5784160: RNCC: 5 | RNVC: 9
5784160: RNCC: 5 | RNVC: 9
5784160-001: RNCC: 5 | RNVC: 9
5784160-001: RNCC: 5 | RNVC: 9
DIN15178-ARRETIRUNG KOMPLETT: RNCC: 5 | RNVC: 9
DIN151783-3-1, 4, 5, 5X26: RNCC: 5 | RNVC: 9

9 Mar 1996

5340-12-196-9842
Mending Plate

121969842
4900059-323445.000.0: RNCC: 3 | RNVC: 2
4900059-323445-000-0: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-319-6242
Bow Handle

123196242
2300232-187050.000.0: RNCC: 2 | RNVC: 2
2300232-187050.000.0: RNCC: 3 | RNVC: 2
2300232-187050.001.02: RNCC: 5 | RNVC: 9

19 Oct 1989

5340-12-175-8001
Mending Plate

121758001
CF311559: RNCC: 3 | RNVC: 2
536056-0510.000: RNCC: 3 | RNVC: 2
CF311559: RNCC: 5 | RNVC: 2
CF 311 559: RNCC: 5 | RNVC: 2
CF 311 559: RNCC: 5 | RNVC: 2
CF311559: RNCC: 5 | RNVC: 2
CF 311 559: RNCC: 5 | RNVC: 2
536056-0510.000: RNCC: 5 | RNVC: 9

18 Oct 1978

5340-12-366-7614
Retaining Strap

123667614
504-122980.001: RNCC: 2 | RNVC: 2
504-122980.001: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-12-354-8338
Metal Grille

123548338
8320-0014: RNCC: 2 | RNVC: 2
8320-0014: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-196-2334
Mending Plate

121962334
535003-3693: RNCC: 3 | RNVC: 2
535003-3693: RNCC: 5 | RNVC: 9
535003-3693.000: RNCC: 5 | RNVC: 9
120003-1830-13: RNCC: 5 | RNVC: 9

15 Jun 1983

5340-12-323-8081
Catch Strike

123238081
C22107-A300-C30: RNCC: 3 | RNVC: 2
66.3578.300.07-A001: RNCC: 3 | RNVC: 2
C22107-A300-C30: RNCC: 5 | RNVC: 2

20 Dec 1990

5340-12-367-0433
Mounting Bracket

123670433
PIKWVF40/40: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-12-702-6008
Loop Clamp

127026008
VG95211-ML-127026008: RNCC: 2 | RNVC: 2
5152A-36: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-177-3470
Rigid Caster

121773470
4607-2200.01: RNCC: 3 | RNVC: 2
4607-2200-01: RNCC: 5 | RNVC: 2
1000095-1200-01: RNCC: 5 | RNVC: 9
1000095-1200.01: RNCC: 5 | RNVC: 9

29 Jan 1979

5340-12-315-2201
Friction Catch Stud

123152201
4900153-22100-00-16: RNCC: 3 | RNVC: 2
4900153-22100-16: RNCC: 5 | RNVC: 9

4 Oct 1988

5340-12-177-7186
Resilient Mount

121777186
E1FH 866 C01: RNCC: 3 | RNVC: 2
2733101: RNCC: 5 | RNVC: 2
5L6672-001-03: RNCC: 5 | RNVC: 2
E1FH866C01: RNCC: 5 | RNVC: 2
5476300: RNCC: 5 | RNVC: 2
643-002: RNCC: 5 | RNVC: 2
C42123-Z58-C2: RNCC: 5 | RNVC: 9
C42123Z58C2: RNCC: 5 | RNVC: 9
E1FH866501: RNCC: 5 | RNVC: 9

14 Feb 1979

5340-12-330-0835
Dust And Moisture Seal Protective Plug

123300835
600B1140: RNCC: 3 | RNVC: 2
GPN600B1140: RNCC: 5 | RNVC: 2
GPN600-B1140: RNCC: 5 | RNVC: 9
GPN600/B1140: RNCC: 5 | RNVC: 9

30 Oct 1992

5340-12-319-3007
Lock-Release Lever

123193007
NO PRIMARY REF 12-319-3007: RNCC: 3 | RNVC: 2
640.001.026: RNCC: 5 | RNVC: 9
FS98SK: RNCC: 5 | RNVC: 9

20 Sep 1989

5340-12-340-4098
Angle Bracket

123404098
6700019-201400.05: RNCC: 2 | RNVC: 2
6700019-201400.05: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-12-091-3374

5340-12-148-4718
Loop Clamp

121484718
HP16N: RNCC: 3 | RNVC: 2
HP16N: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-6169
Dust And Moisture Seal Protective Cap

121996169
158718: RNCC: 2 | RNVC: 2
158718: RNCC: 3 | RNVC: 2

16 May 1984

5340-12-199-4821
Retaining Strap

121994821
7801850010: RNCC: 3 | RNVC: 2
78018 50010: RNCC: 5 | RNVC: 9

1 May 1984

5340-12-392-8691
Mounting Plate

123928691
L135M2902215: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-12-300-6956
Dust And Moisture Seal Protective Cap

123006956
0001591585: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-187-2744

5340-12-177-0545
Dust And Moisture Seal Protective Plug

121770545
51960020003: RNCC: 3 | RNVC: 2
5000045642: RNCC: 5 | RNVC: 2
5960020003: RNCC: 5 | RNVC: 2
4079975086: RNCC: 5 | RNVC: 2
5000045642: RNCC: 5 | RNVC: 9
5960020003: RNCC: 5 | RNVC: 9

9 Jan 1979

5340-12-329-3516
Retaining Clip

123293516
2300248-80260.05: RNCC: 2 | RNVC: 2
2300248-80260.05: RNCC: 3 | RNVC: 2
2300248-80260.05: RNCC: 5 | RNVC: 2
2300248-80260.05: RNCC: 5 | RNVC: 9

11 Aug 1992

5340-12-360-6679
Retaining Bail

123606679
3414512707: RNCC: 3 | RNVC: 2
3414512707: RNCC: 5 | RNVC: 2

25 Jun 2003

5340-12-368-6832
Manual Control Lever

123686832
703883633A01C: RNCC: 3 | RNVC: 2

6 Apr 2006

5340-12-382-0220
Webbing Strap

123820220
2476-71000: RNCC: 3 | RNVC: 2

28 Apr 2010

5340-12-041-0864

5340-12-315-6936
Mortise Lock Set

123156936
SZ2528000: RNCC: 3 | RNVC: 2
SZ2528: RNCC: 5 | RNVC: 2

19 Nov 1988

5340-12-302-1507
Webbing Strap

123021507
183871223D: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-193-0491
Retaining Strap

121930491
5800740240: RNCC: 3 | RNVC: 2

16 Jun 1982

5340-12-360-0777
Mounting Plate

123600777
9418400726: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-12-179-2453
Mending Plate

121792453
2481401: RNCC: 3 | RNVC: 2

18 Jun 1979

5340-12-364-1459
Escutcheon Plate

123641459
211894: RNCC: 3 | RNVC: 2

25 Aug 2004

5340-12-307-2582
Double Angle Bracket

123072582
03584900: RNCC: 3 | RNVC: 2

27 May 1986

5340-12-311-0164
Access Cover

123110164
00904710: RNCC: 3 | RNVC: 2

17 Jul 1987

5340-12-022-9430

5340-12-356-3283
Mounting Bracket

123563283
167.061.160: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-12-197-8474
Bridge Clamp

121978474
107835: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-12-134-7189
Butt Hinge Leaf

121347189
LN9172AH300: RNCC: 2 | RNVC: 2
A20X300LN9172: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-322-3578
Double Angle Bracket

123223578
100013035: RNCC: 3 | RNVC: 2

15 Aug 1990

5340-12-173-8556
Loop Clamp

121738556
PAN4231CF3624: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-177-5502
Angle Bracket

121775502
4115660626: RNCC: 3 | RNVC: 2

5 Feb 1979

5340-12-305-3350
Loop Clamp

123053350
RP988707: RNCC: 3 | RNVC: 2

23 Oct 1985

5340-12-361-6704
Access Cover

123616704
S533M6034210: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-043-1024

5340-12-024-5571

5340-12-305-2592
Mending Plate

123052592
4900059-121276.000.0/1: RNCC: 3 | RNVC: 2
4900059-121276.001.0: RNCC: 5 | RNVC: 2

15 Oct 1985

5340-12-340-4108
Mechanical Stop

123404108
CS032-2: RNCC: 3 | RNVC: 2
CS032-2 (IDVCS065-117.895): RNCC: 5 | RNVC: 2

10 Apr 1996

5340-12-340-6454
Mounting Bracket

123406454
463-069106.000: RNCC: 3 | RNVC: 9
9901340: RNCC: 5 | RNVC: 9

16 May 1996

5340-12-197-5849
Mending Plate

121975849
A-230129-153: RNCC: 3 | RNVC: 2
A230129-153: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-362-5412
Runner

123625412
2654-336224.07: RNCC: 2 | RNVC: 2
2654-336224.07: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-177-2270
Retaining Strap

121772270
WG3005740U: RNCC: 3 | RNVC: 2
WG 300 574 -U: RNCC: 5 | RNVC: 2
WG3005740U: RNCC: 5 | RNVC: 9
WG 300 574 -U: RNCC: 5 | RNVC: 9

22 Jan 1979

5340-12-336-6580
Angle Bracket

123366580
181430802: RNCC: 2 | RNVC: 2
181430802: RNCC: 3 | RNVC: 2
D181430802: RNCC: 5 | RNVC: 9

6 Dec 1994

5340-12-388-7109
Threaded Hinged Standoff

123887109
140.03.015: RNCC: 3 | RNVC: 2
140.03.015: RNCC: 5 | RNVC: 2

17 Apr 2012

5340-12-358-0909
Rod End Clevis

123580909
1948074K24: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-12-377-3137
Loop Clamp

123773137
41222342: RNCC: 3 | RNVC: 2

7 Jan 2009

5340-12-345-4671
Angle Bracket

123454671
54.0053.660.00: RNCC: 3 | RNVC: 2

20 Mar 1998

5340-12-356-1383
Shimmy Damper

123561383
4636820040: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-12-361-2952
Handle Grip

123612952
CBD32539P01: RNCC: 3 | RNVC: 2

15 Sep 2003

5340-12-391-6314
Angle Bracket

123916314
L104328: RNCC: 3 | RNVC: 2

22 Mar 2013

5340-12-353-4836
Access Cover

123534836
5802017-716400.00: RNCC: 2 | RNVC: 2
5802017-716400.00: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-12-168-3278
Casement Fastener

121683278
103502302: RNCC: 3 | RNVC: 2
D103502302: RNCC: 5 | RNVC: 2

7 Mar 1977

5340-12-171-9902
Expansion Plug

121719902
PAN4315A04: RNCC: 3 | RNVC: 2

8 Dec 1977

5340-12-181-1556
Loop Clamp

121811556
R23124: RNCC: 3 | RNVC: 2
R23124: RNCC: 5 | RNVC: 9

29 Oct 1979

5340-12-329-9666
Mounting Bracket

123299666
0853 1028.004: RNCC: 3 | RNVC: 2
8531028.004: RNCC: 5 | RNVC: 2

16 Oct 1992

5340-12-359-9722
Dust And Moisture Seal Protective Cap

123599722
15-15300ASCHWARZ: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-315-0239
Double Angle Bracket

123150239
P-296820-405: RNCC: 3 | RNVC: 2
P296820-405: RNCC: 5 | RNVC: 2

8 Sep 1988

5340-12-164-8569
Loop Clamp

121648569
RAPG11-216: RNCC: 3 | RNVC: 2
RAPG11-216: RNCC: 3 | RNVC: 2
0047810: RNCC: 5 | RNVC: 2
RAPE11-216-GLATT: RNCC: 5 | RNVC: 2
RAPE11-216-GLATT: RNCC: 5 | RNVC: 2
VG95932DB-2-16-PP-W1-AS: RNCC: 5 | RNVC: 9
VG95932B2-16-PP-W1-OHNE DP: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-344-4736
Angle Bracket

123444736
P-233128-417: RNCC: 3 | RNVC: 2
P233128-417: RNCC: 5 | RNVC: 2

30 Oct 1997

5340-12-313-7178
Double Angle Bracket

123137178
P-085017-001: RNCC: 3 | RNVC: 2
P085017-001: RNCC: 5 | RNVC: 2

28 Apr 1988

5340-12-194-3838
Mending Plate

121943838
A-616776-005: RNCC: 3 | RNVC: 2
A616776-005: RNCC: 5 | RNVC: 2

28 Oct 1982

5340-12-176-2793
Webbing Strap

121762793
23111-4185.00: RNCC: 2 | RNVC: 2
23111-4185-00: RNCC: 3 | RNVC: 2
8-4157.00: RNCC: 5 | RNVC: 2
8-4157.00: RNCC: 5 | RNVC: 2
8-4157.00: RNCC: 5 | RNVC: 9
23111-4185-00: RNCC: 5 | RNVC: 9
23111-4185-00: RNCC: 5 | RNVC: 9
8-4157.00: RNCC: 5 | RNVC: 9
8-4157-00: RNCC: 5 | RNVC: 9
000-C1-25X2,5X250-BW-RAL6031: RNCC: 6 | RNVC: 9

23 Nov 1978

5340-12-191-4172
Lock-Release Lever

121914172
02-0899-180710.02.0: RNCC: 3 | RNVC: 2
02-0899-180710-02-0: RNCC: 5 | RNVC: 9

2 Feb 1982

5340-12-171-2324
Retaining Strap

121712324
06670630204: RNCC: 3 | RNVC: 2
06.67063.0204: RNCC: 5 | RNVC: 2
M7.750-60-2X12-6-A4C: RNCC: 5 | RNVC: 2

21 Sep 1977

5340-12-158-0257
Loop Clamp

121580257
DIN3016-1-A1-46X20-W1-2: RNCC: 2 | RNVC: 2
RS1.46/20: RNCC: 3 | RNVC: 2
DIN3016-A1-46X20-W1-2: RNCC: 3 | RNVC: 2
RS1100.46/20: RNCC: 5 | RNVC: 2
RS1100-46-20: RNCC: 5 | RNVC: 2
4110020046: RNCC: 5 | RNVC: 2
VG95931A46X20W1: RNCC: 5 | RNVC: 9
VG95931-A46X20-W1: RNCC: 5 | RNVC: 9
DIN3016-A1-46X20-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-4862
Mending Plate

123064862
25704-190100.76.0: RNCC: 2 | RNVC: 2
25704-190100.76.0: RNCC: 3 | RNVC: 2

4 Mar 1986

5340-12-197-6631
Nonmetallic Bumper

121976631
C-001090-017: RNCC: 3 | RNVC: 2
C001090-017: RNCC: 5 | RNVC: 9

14 Nov 1983

5340-12-362-8577
Mending Plate

123628577
70813-001: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-12-339-0928
Mounting Bracket

123390928
4900319-103000.00: RNCC: 2 | RNVC: 2
4900319-103000.00: RNCC: 3 | RNVC: 2

10 Oct 1995

5340-12-179-3586
Resilient Mount

121793586
505001-SW27X20-M8X16.NR65.ST: RNCC: 3 | RNVC: 2
FH2-20: RNCC: 3 | RNVC: 9
0019872640: RNCC: 5 | RNVC: 2

25 Jun 1979

5340-12-384-5949
Dust And Moisture Seal Protective Cap

123845949
2827: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-12-313-0447
Dust And Moisture Seal Protective Cap

123130447
81072046: RNCC: 3 | RNVC: 2

1 Mar 1988

5340-12-378-0391
Spring Tension Clip

123780391
504167133: RNCC: 3 | RNVC: 2

9 Mar 2009

5340-12-341-6510
Dust And Moisture Seal Protective Cap

123416510
03627100: RNCC: 3 | RNVC: 2
03627100.534: RNCC: 5 | RNVC: 2

10 Oct 1996

5340-12-325-3989
Mounting Plate

123253989
525465006: RNCC: 3 | RNVC: 2
52 546 5006: RNCC: 5 | RNVC: 2

3 Jun 1991

5340-12-374-2511
Access Cover

123742511
L533M1803101: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-129-4939

5340-12-377-4108
Mounting Plate

123774108
4100037-981170.001: RNCC: 2 | RNVC: 2
4100037-981170.001: RNCC: 3 | RNVC: 2

14 Jan 2009

5340-12-368-7337
Dust And Moisture Seal Protective Cap

123687337
13.0115.8018: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-12-342-7189
Mounting Bracket

123427189
1218254: RNCC: 3 | RNVC: 2
1218254: RNCC: 5 | RNVC: 2

19 Mar 1997

5340-12-373-2039
Mending Plate

123732039
4604631040: RNCC: 3 | RNVC: 2
460 463 10 40: RNCC: 5 | RNVC: 2

9 Oct 2007

5340-12-165-8074
Dust And Moisture Seal Protective Cap-Plug

121658074
900A24: RNCC: 3 | RNVC: 2
GPN900A24: RNCC: 5 | RNVC: 2
A24GPN900: RNCC: 5 | RNVC: 9
900002400: RNCC: 5 | RNVC: 9
A24: RNCC: 5 | RNVC: 9
GPN900,A24: RNCC: 5 | RNVC: 9

30 Jun 1976

5340-12-362-7246
Angle Bracket

123627246
SW8103G139: RNCC: 2 | RNVC: 2
SW8103G139: RNCC: 3 | RNVC: 9

24 Mar 2004

5340-12-362-7350
Mounting Bracket

123627350
S535M1069214: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-12-139-8975

5340-12-362-6904
Angle Bracket

123626904
S533M7006213: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-333-9311
Mounting Bracket

123339311
3226970215: RNCC: 3 | RNVC: 2

24 Feb 1994

5340-12-336-2846
Angle Bracket

123362846
4620 335 092: RNCC: 3 | RNVC: 2
4620335092: RNCC: 5 | RNVC: 9

7 Nov 1994

5340-12-374-2532
Butt Hinge

123742532
L533M1246212: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-026-9280

5340-12-700-2999
Access Cover

127002999
51-200747074: RNCC: 2 | RNVC: 2
2A28/3-7: RNCC: 3 | RNVC: 2
2A28/3-7: RNCC: 5 | RNVC: 9
2A28-3-7: RNCC: 5 | RNVC: 9

4 Dec 1991

5340-12-378-0709
Runner

123780709
320.001-085: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-198-1426
Angle Bracket

121981426
5800045-1000.06: RNCC: 2 | RNVC: 2
5800045-1000.06: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-340-6524
Mounting Bracket

123406524
8854-101-101: RNCC: 3 | RNVC: 2

18 May 1996

5340-12-385-6827
Loop Clamp

123856827
909623112: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-12-394-7995

5340-12-417-8591

5340-12-301-9966
Loop Clamp

123019966
3228900571: RNCC: 3 | RNVC: 2

24 Nov 1984

5340-12-352-5687
Spacing Threaded Standoff

123525687
5.04.401: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-176-0407
Loop Clamp

121760407
LN9490B22: RNCC: 2 | RNVC: 2

6 Nov 1978

5340-12-342-6007
Double Angle Bracket

123426007
VG95211-ML-123426007: RNCC: 2 | RNVC: 2
P-086627-043: RNCC: 3 | RNVC: 2
P086627-043: RNCC: 5 | RNVC: 2

6 Mar 1997

5340-12-363-1302
Access Cover

123631302
1747-140000.002.0: RNCC: 3 | RNVC: 2

6 May 2004

5340-12-326-3993
Nonmetallic Bumper

123263993
714-001300-925-0: RNCC: 2 | RNVC: 2
714-001300-925-0: RNCC: 3 | RNVC: 2
PLATTE50X25X2MM-5.5701.9: RNCC: 5 | RNVC: 2

11 Sep 1991

5340-12-176-4596
Turnbuckle

121764596
DIN1480-SPM12X180ST-A3P 2 OESEN: RNCC: 2 | RNVC: 2
SP-DIN1480-M12X180-OE/OE-A3P: RNCC: 3 | RNVC: 2
NR.020 M12X180 VERZINKT: RNCC: 3 | RNVC: 2
DIN1480-SP-RR-M12X180 GALZN: RNCC: 3 | RNVC: 2
DIN1480-SP-M12X180 GALZN 2 OESEN: RNCC: 5 | RNVC: 2
M12X180DIN1480FEUERVERZINKT: RNCC: 5 | RNVC: 2
M12X180DIN1480MIT20ESENFEUERVZK: RNCC: 5 | RNVC: 2

29 Nov 1978

5340-12-170-1214
Double Angle Bracket

121701214
1392451-080202.021.0: RNCC: 3 | RNVC: 2
1392451-080202-021-0: RNCC: 5 | RNVC: 2

27 Jun 1977

5340-12-305-1130
Mending Plate

123051130
4900059-111214.003.0: RNCC: 3 | RNVC: 2
1228836: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-352-9553
Mounting Bracket

123529553
1227 5559: RNCC: 3 | RNVC: 2

12 Jan 2001

5340-12-373-6300
Access Cover

123736300
X00037236: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-12-130-1151

5340-12-314-5708
Mending Plate

123145708
948283777: RNCC: 3 | RNVC: 2

20 Jul 1988

5340-12-365-2762
Loop Clamp

123652762
071555100501: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-393-4883
Lock-Release Lever

123934883
2525040: RNCC: 3 | RNVC: 2
ASC17456: RNCC: 5 | RNVC: 2
2525040: RNCC: 5 | RNVC: 2
ASC17456: RNCC: 5 | RNVC: 2

18 Sep 2013

5340-12-351-8074
Mechanical Stop

123518074
10063-231300: RNCC: 3 | RNVC: 2
10063-231300: RNCC: 5 | RNVC: 9

28 Aug 2000

5340-12-351-9856
Mounting Plate

123519856
5633701: RNCC: 3 | RNVC: 2

25 Sep 2000

5340-12-364-2616
Mounting Bracket

123642616
4375004331: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-199-1770
Dust And Moisture Seal Protective Cap

121991770
068130229: RNCC: 3 | RNVC: 2
068130229: RNCC: 5 | RNVC: 2

3 Apr 1984

5340-12-092-2658

5340-12-020-7436

5340-12-309-6824
Loop Clamp

123096824
18211454493: RNCC: 3 | RNVC: 9

16 Feb 1987

5340-12-310-0587
Retaining Strap

123100587
3668001654: RNCC: 3 | RNVC: 2
17122: RNCC: 5 | RNVC: 2
1712200000: RNCC: 5 | RNVC: 2

2 Apr 1987

5340-12-310-6692
Lock-Release Lever

123106692
09299: RNCC: 3 | RNVC: 2

12 Jun 1987

5340-12-141-6112

5340-12-374-6723
Double Angle Bracket

123746723
SK872-166400.002.0: RNCC: 3 | RNVC: 2

6 Mar 2008

5340-12-378-6820
Dust And Moisture Seal Protective Cap

123786820
1-SH-004-6-01-2-Y04: RNCC: 3 | RNVC: 2

30 Apr 2009

5340-12-128-9096
Spring Tension Clip

121289096
1216 8430: RNCC: 3 | RNVC: 2
12168430: RNCC: 5 | RNVC: 9
6-420-0-977-008-4: RNCC: 5 | RNVC: 9
6.420.0.977.008.4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-181-8767
Rigid Caster

121818767
RLB 19,7X6X29 TN RB: RNCC: 3 | RNVC: 2
F-58027: RNCC: 5 | RNVC: 2
6X19-7X29: RNCC: 5 | RNVC: 9

21 Dec 1979

5340-12-339-7620
Mounting Bracket

123397620
1602-101120.000.0: RNCC: 2 | RNVC: 2
1602-101120.000.0: RNCC: 3 | RNVC: 2

12 Jan 1996

5340-12-339-1674
Nonmetallic Bumper

123391674
DIN95364-F50X58-NR55ST: RNCC: 2 | RNVC: 2
58497-BSTN5590: RNCC: 5 | RNVC: 2
5849755SH: RNCC: 5 | RNVC: 2
552002-M10X28.NR55.ST: RNCC: 5 | RNVC: 2
VG95364-F50X58-NR55ST: RNCC: 5 | RNVC: 9

20 Oct 1995

5340-12-332-8474
Webbing Strap

123328474
79017/026-1500-0700: RNCC: 3 | RNVC: 2
79017/026-1500-700: RNCC: 3 | RNVC: 2
79017/026-1500-0700: RNCC: 5 | RNVC: 9

27 Sep 1993

5340-12-319-4508
Angle Bracket

123194508
5802295-119000: RNCC: 2 | RNVC: 2
7800591330: RNCC: 3 | RNVC: 2
452-319000-000-0: RNCC: 5 | RNVC: 2

3 Oct 1989

5340-12-188-9462
Platte

121889462
2500075-194200.001.0: RNCC: 2 | RNVC: 2
2500075-194200.001.0: RNCC: 3 | RNVC: 2
2500075-194200-001-0: RNCC: 5 | RNVC: 2
2500075-194200-001-0: RNCC: 5 | RNVC: 9
2500075-194200.001.0: RNCC: 5 | RNVC: 9

11 Aug 1981

5340-12-365-0436
Angle Bracket

123650436
A-245425-013: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-321-9233
Spring Tension Clip

123219233
545-5037: RNCC: 3 | RNVC: 2
545-5037-A: RNCC: 5 | RNVC: 2

10 Jul 1990

5340-12-361-4457
Manual Control Lever

123614457
13-12-019: RNCC: 3 | RNVC: 2
3972227: RNCC: 3 | RNVC: 2
PW072.12.165/4: RNCC: 5 | RNVC: 9

1 Oct 2003

5340-12-312-9535
Hinged Hasp

123129535
2608534: RNCC: 3 | RNVC: 2
3-2608-534: RNCC: 5 | RNVC: 2

22 Feb 1988

5340-12-186-1779
Electrical-Mechanical Equipment Post

121861779
4900059-751290-006-0: RNCC: 3 | RNVC: 2
4900059-751290.006.0: RNCC: 3 | RNVC: 2
751290-006-0: RNCC: 5 | RNVC: 2

5 Dec 1980

5340-12-143-7921
Resilient Mount

121437921
DIN95363-C15X15-M5-NR45ST: RNCC: 2 | RNVC: 2
520007-M5-NR45.ST: RNCC: 5 | RNVC: 2
7F814-98-0-002: RNCC: 5 | RNVC: 9
7F81498-0-002: RNCC: 5 | RNVC: 9
VG95363-C15X15-M5-NR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-1595
Retaining Clip

123211595
SA M-LOL-000000-30009-408-4: RNCC: 3 | RNVC: 2
SA M-LOL-000000-30009-408-4: RNCC: 5 | RNVC: 9

6 Apr 1990

5340-12-329-8146
Container Adapter

123298146
40412-032: RNCC: 2 | RNVC: 2
40412-032: RNCC: 3 | RNVC: 2
M-LAL-141000-40412-032: RNCC: 5 | RNVC: 2
M-LAL-141000-40412-032: RNCC: 5 | RNVC: 9
40412-032: RNCC: 5 | RNVC: 9

2 Oct 1992

5340-12-320-8834
Mounting Plate

123208834
333991122: RNCC: 2 | RNVC: 2
333991122: RNCC: 3 | RNVC: 2

1 Mar 1990

5340-12-321-2525
Helical Compression Spring Seat

123212525
2420222020: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-12-385-0849
Nut And Bolt Retainer

123850849
M2747004520000: RNCC: 3 | RNVC: 2

28 Apr 2011

5340-12-310-6561
Support Hook

123106561
5802017-708300.06: RNCC: 2 | RNVC: 2
5802017-708300.06: RNCC: 3 | RNVC: 2

12 Jun 1987

5340-12-193-3123
Flare Lock Fastener

121933123
SCL 5350: RNCC: 3 | RNVC: 2
0029887578: RNCC: 5 | RNVC: 2
A0029887578: RNCC: 5 | RNVC: 2
721 1 83 248 1: RNCC: 5 | RNVC: 9

12 Jul 1982

5340-12-358-6830
Angle Bracket

123586830
2481-390107.000.0: RNCC: 2 | RNVC: 2
2481-390107.000.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-312-2503
Plug Button

123122503
100000419: RNCC: 2 | RNVC: 2
100000419: RNCC: 3 | RNVC: 2

9 Dec 1987

5340-12-388-6132
Mounting Bracket

123886132
5842033840: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-12-303-5855
Access Cover

123035855
288 787: RNCC: 3 | RNVC: 2
947.61.003.01.4: RNCC: 5 | RNVC: 2

10 Apr 1985

5340-12-379-4805
Mounting Bracket

123794805
5119950048: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-12-320-7033
Clamping Catch

123207033
94136: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-179-1358
Loop Clamp

121791358
LN9491BK55: RNCC: 2 | RNVC: 2

8 Jun 1979

5340-12-176-1937
Loop Clamp

121761937
PAN4231MM6234: RNCC: 3 | RNVC: 2

13 Nov 1978

5340-12-344-1626
Support Hook

123441626
347291: RNCC: 3 | RNVC: 9
347291: RNCC: 3 | RNVC: 9

22 Sep 1997

5340-12-344-3478
Dust And Moisture Seal Protective Plug

123443478
81960020347: RNCC: 3 | RNVC: 2
81.96002.0347: RNCC: 5 | RNVC: 2
11.09415: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-304-0890
Rim Lock

123040890
7402112: RNCC: 3 | RNVC: 2

10 Jun 1985

5340-12-139-1167
Loop Clamp

121391167
1291312012: RNCC: 3 | RNVC: 2
EMBE22Z18X: RNCC: 5 | RNVC: 2
EMBE22Z18X823: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-337-8118
Double Angle Bracket

123378118
460 830 31 14: RNCC: 3 | RNVC: 2
4608303114: RNCC: 5 | RNVC: 2

18 Apr 1995

5340-12-173-6747
Helical Compression Spring Retainer

121736747
1420505026: RNCC: 3 | RNVC: 2
1420505026: RNCC: 5 | RNVC: 2
0359332: RNCC: 5 | RNVC: 2
0128 8602: RNCC: 5 | RNVC: 2
0855407100: RNCC: 5 | RNVC: 2
359332: RNCC: 5 | RNVC: 9

28 Apr 1978

5340-12-384-7514
Headless Straight Rod

123847514
WTG750493: RNCC: 3 | RNVC: 2

25 Mar 2011

5340-12-027-6050

5340-12-043-5473

5340-12-026-9429

5340-12-364-6590
Angle Bracket

123646590
54.1105.200.02: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-313-6647
Mounting Bracket

123136647
P-896398-405: RNCC: 3 | RNVC: 2
P896398-405: RNCC: 5 | RNVC: 2

23 Apr 1988

5340-12-173-4971
Split Tubular Clip

121734971
Y3X0-5X8X1MMMESSING: RNCC: 3 | RNVC: 2
Y3X0-5X8X1MS: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-12-300-9832
Compression Cup

123009832
TFH37,75-57,8-7,5-4TF/529: RNCC: 3 | RNVC: 2
TFH37,75-57,8-7,5: RNCC: 5 | RNVC: 2
THF37,75-57,8-7,5: RNCC: 5 | RNVC: 9

14 Sep 1984

5340-12-319-3679
Double Angle Bracket

123193679
2300264-066200.00.0: RNCC: 2 | RNVC: 2
2300264-066200.00.0: RNCC: 3 | RNVC: 2
2300264-066200-00-0: RNCC: 5 | RNVC: 9
2300264-066200-00-0: RNCC: 5 | RNVC: 9

26 Sep 1989

5340-12-301-1650
Mending Plate

123011650
A-243825-015: RNCC: 3 | RNVC: 2
A243825-015: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-344-1476
Plug Button

123441476
7300043-0-03: RNCC: 2 | RNVC: 2
3-915501: RNCC: 3 | RNVC: 2

18 Sep 1997

5340-12-188-2227
Rigid Caster

121882227
4312 712 19440: RNCC: 3 | RNVC: 2
431271219440: RNCC: 5 | RNVC: 2
5801685-212000.14: RNCC: 5 | RNVC: 9
5801685-212000-14: RNCC: 5 | RNVC: 9

16 Jun 1981

5340-12-158-9345
Catch Strike

121589345
2572-190005.00.0: RNCC: 2 | RNVC: 2
2572-190005-00-0: RNCC: 5 | RNVC: 2
2572-190005-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-7817
Electrical-Mechanical Equipment Post

121787817
10448-01: RNCC: 3 | RNVC: 2
477110: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-314-9376
Mending Plate

123149376
P-146244-008: RNCC: 3 | RNVC: 2
P146244-008: RNCC: 5 | RNVC: 2

30 Aug 1988

5340-12-348-8953
Retaining Clip

123488953
1682-004381.000.0: RNCC: 2 | RNVC: 2
1682-004381.000.0: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-176-6971
Spring Tension Clip

121766971
C20136A114C136: RNCC: 3 | RNVC: 2
TDRUCK4T2136: RNCC: 5 | RNVC: 2
C20136-A114-C136: RNCC: 5 | RNVC: 2
TFS72-55136: RNCC: 5 | RNVC: 2

13 Dec 1978

5340-12-187-1938
Rod End Connector

121871938
0980006LINKS: RNCC: 3 | RNVC: 2
6090415: RNCC: 5 | RNVC: 2
6090-415: RNCC: 5 | RNVC: 2

11 Mar 1981

5340-12-307-9371
Butt Hinge

123079371
DIN7956-32-0,7-30-ST-ZN-410: RNCC: 2 | RNVC: 2

12 Aug 1986

5340-12-344-3760
Mounting Bracket

123443760
A-296860-015: RNCC: 3 | RNVC: 2
A296860-015: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-314-5918
Access Cover

123145918
512214-0248.000: RNCC: 3 | RNVC: 2
512214-0248: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-12-356-1241
Handle Grip

123561241
2339-010483A00C: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-321-1903
Mounting Plate

123211903
5802261-000000.001: RNCC: 2 | RNVC: 2
5802261-000000.001: RNCC: 5 | RNVC: 9

11 Apr 1990

5340-12-328-9746
Rod End Connector

123289746
2350-010200.003.0: RNCC: 2 | RNVC: 2
2350-010200.003.0: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-197-3353
Double Angle Bracket

121973353
86-1559-201200.003.0: RNCC: 3 | RNVC: 2
86-1559-201200.003.0: RNCC: 5 | RNVC: 9

13 Oct 1983

5340-12-326-6884
Nonmetallic Bumper

123266884
DIN95364-F20X24-NR55ST: RNCC: 2 | RNVC: 2
5849655SH: RNCC: 5 | RNVC: 2
552000-20X24-M6X19.NR55.ST: RNCC: 5 | RNVC: 2
58496-BSTN5590: RNCC: 5 | RNVC: 2
0716110108: RNCC: 5 | RNVC: 2
VG95364-F20X24-NR55ST: RNCC: 5 | RNVC: 9

22 Oct 1991

5340-12-317-2893
Butt Hinge Leaf

123172893
714-001602-903-0: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-319-4811
Angle Bracket

123194811
2300007-012600.002.0: RNCC: 2 | RNVC: 2
2300007-012600.002.0: RNCC: 3 | RNVC: 2
2300007-012600.002.0: RNCC: 5 | RNVC: 2

5 Oct 1989

5340-12-174-9204
Electronic Equipment Hardware Kit

121749204
5801469: RNCC: 3 | RNVC: 2

7 Aug 1978

5340-12-365-8378
Bridge Clamp

123658378
7835011120: RNCC: 3 | RNVC: 2

10 Feb 2005

5340-12-376-6911
Manual Control Handle

123766911
0165462: RNCC: 3 | RNVC: 2

29 Oct 2008

5340-12-175-3358
Double Angle Bracket

121753358
823253209A: RNCC: 3 | RNVC: 2

11 Sep 1978

5340-12-353-2160
Strap Hinge Leaf

123532160
01000052: RNCC: 3 | RNVC: 2
0008630050: RNCC: 5 | RNVC: 2

12 Feb 2001

5340-12-364-0047
Loop Clamp

123640047
916016016201: RNCC: 3 | RNVC: 2

11 Aug 2004

5340-12-300-7456
Nonmetallic Bumper

123007456
A11A521140007: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-375-6023
Dust And Moisture Seal Protective Plug

123756023
0009976220: RNCC: 3 | RNVC: 2

17 Jun 2008

5340-12-369-1470
Lock Key

123691470
50404900: RNCC: 3 | RNVC: 2

30 May 2006

5340-12-357-3302
Mounting Bracket

123573302
151-2303.07: RNCC: 3 | RNVC: 2

7 Jun 2002

5340-12-344-7028
Access Cover

123447028
5560980843: RNCC: 3 | RNVC: 2

1 Dec 1997

5340-12-382-5946
Access Cover

123825946
71011427: RNCC: 3 | RNVC: 2

14 Jul 2010

5340-12-383-0107
Webbing Strap

123830107
9219960: RNCC: 3 | RNVC: 2

2 Sep 2010

5340-12-129-8486

5340-12-353-7061
Mounting Bracket

123537061
47065231400: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-360-3521
Spring Tension Clip

123603521
0009502262: RNCC: 3 | RNVC: 2
0009502262: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-194-6476
Key Blank

121946476
8901.00.075: RNCC: 3 | RNVC: 2
MB18: RNCC: 5 | RNVC: 2
HF24: RNCC: 5 | RNVC: 2
0007664906: RNCC: 5 | RNVC: 2

25 Nov 1982

5340-12-347-7115
Mounting Bracket

123477115
9136824000: RNCC: 3 | RNVC: 2
913682 4000: RNCC: 5 | RNVC: 2

1 Feb 1999

5340-12-305-8398
Plug Button

123058398
0295 0750: RNCC: 3 | RNVC: 2
2950750: RNCC: 5 | RNVC: 2
2950750EZ0609-98: RNCC: 5 | RNVC: 2

20 Dec 1985

5340-12-332-2537
Nonmetallic Bumper

123322537
1H4833506: RNCC: 3 | RNVC: 9

26 Jul 1993

5340-12-378-5927
Mounting Bracket

123785927
9251703000: RNCC: 3 | RNVC: 2

23 Apr 2009

5340-12-121-5976

5340-12-385-4390
Mounting Bracket

123854390
X55820200001: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-361-0010
Door Hook And Eye

123610010
65612: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-358-9661
Mounting Bracket

123589661
T947M4005215: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-359-4748
Fuehrungs- Schiene

123594748
L1U150200: RNCC: 3 | RNVC: 2
267-5820: RNCC: 5 | RNVC: 2

10 Feb 2003

5340-12-359-5835
Mounting Bracket

123595835
9428902646: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-12-155-0398
Resilient Mount

121550398
GMH7067977: RNCC: 3 | RNVC: 2
GMH7067977: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-384-4258
Mounting Plate

123844258
H50092: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-12-011-6275

5340-12-340-1199
Angle Bracket

123401199
726 22918 AAAA: RNCC: 3 | RNVC: 2
726 22918 AAAA-HDQA: RNCC: 5 | RNVC: 2
72622918AAAA: RNCC: 5 | RNVC: 2

1 Mar 1996

5340-12-309-1823
Mending Plate

123091823
P-245174-755: RNCC: 3 | RNVC: 2
P245174-755: RNCC: 5 | RNVC: 2

19 Dec 1986

5340-12-387-5910
Loop Clamp

123875910
DIN3016-1-D1-30X15-W1-2-EPDM: RNCC: 2 | RNVC: 2
05423015: RNCC: 3 | RNVC: 2

12 Jan 2012

5340-12-350-8578
Webbing Strap

123508578
58R118-2361-2: RNCC: 3 | RNVC: 2

30 May 2000

5340-12-318-1923
Mounting Bracket

123181923
1000192-01 2 30000.13: RNCC: 2 | RNVC: 2
1000192-01 2 30000.13: RNCC: 3 | RNVC: 2
1000192-01 2 30000.13: RNCC: 5 | RNVC: 9

20 Jun 1989

5340-12-164-8639
Catch Strike

121648639
2300HKNSKADMIERT: RNCC: 3 | RNVC: 2
0646-100: RNCC: 5 | RNVC: 2
0646100: RNCC: 5 | RNVC: 2
8406005: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-356-0615
Loop Clamp

123560615
916016006208: RNCC: 3 | RNVC: 2
N16016-BRSGUS 6/15: RNCC: 5 | RNVC: 9

17 Jan 2002

5340-12-701-9545
Threaded End Tensioning Tie Rod

127019545
VG95211-ML-127019545: RNCC: 2 | RNVC: 2
5.12.6500.0461.05: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-701-4374
Mounting Plate

127014374
VG95211-ML-127014374: RNCC: 2 | RNVC: 2
5.12.5313.2990.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-310-0090
Access Door

123100090
23305-185200.00.0: RNCC: 2 | RNVC: 2
23305-185200.00.0: RNCC: 3 | RNVC: 2
23305-185210-00-0: RNCC: 5 | RNVC: 9

27 Mar 1987

5340-12-366-2902
Dust And Moisture Seal Protective Cap

123662902
73Z-0-0-291: RNCC: 3 | RNVC: 2
73Z-0-0-291: RNCC: 5 | RNVC: 2

6 Apr 2005

5340-12-302-8248
Resilient Mount

123028248
DIN95363-A25X10-NR55ST: RNCC: 2 | RNVC: 2
1.25.10.1.55NR/ST: RNCC: 5 | RNVC: 2
811.000.025.010.06X20.NR55.ST: RNCC: 5 | RNVC: 2
81100-25X10-M6X20.NR55.ST: RNCC: 5 | RNVC: 2
81100-25X10-M6X20.NR55.STZN: RNCC: 5 | RNVC: 2
25 388: RNCC: 5 | RNVC: 2
B94507: RNCC: 5 | RNVC: 2
VG95363-A25X10-NR55ST: RNCC: 5 | RNVC: 9
VG95363-A25X10-NR55STZN: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-306-4001
Double Angle Bracket

123064001
V22.917.2-25: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-302-4685
Electronic Equipment Hardware Kit

123024685
69001-893: RNCC: 3 | RNVC: 2

3 Jan 1985

5340-12-327-5031
Nonmetallic Bumper

123275031
11227909910: RNCC: 3 | RNVC: 2

28 Jan 1992

5340-12-377-7163
Manual Control Handle

123777163
1911058: RNCC: 3 | RNVC: 2
81671050053: RNCC: 5 | RNVC: 2

5 Feb 2009

5340-12-311-9479
Angle Bracket

123119479
2300074-4700.02: RNCC: 2 | RNVC: 2
2300074-4700.02: RNCC: 3 | RNVC: 2
2300074-4700.02: RNCC: 5 | RNVC: 9

3 Nov 1987

5340-12-317-0341
Shimmy Damper

123170341
085537: RNCC: 3 | RNVC: 2
554444: RNCC: 5 | RNVC: 2

6 Mar 1989

5340-12-377-9986
Loop Clamp

123779986
41231098: RNCC: 3 | RNVC: 2

4 Mar 2009

5340-12-302-9545
Mending Plate

123029545
70567: RNCC: 3 | RNVC: 2

12 Feb 1985

5340-12-386-5151
Mounting Bracket

123865151
0053 316 061: RNCC: 3 | RNVC: 2

7 Sep 2011

5340-12-377-3954
Surface Bolt

123773954
8605001.3.550.17: RNCC: 3 | RNVC: 2
8605001355017: RNCC: 5 | RNVC: 2

14 Jan 2009

5340-12-303-9803
Flush Lock

123039803
321837015: RNCC: 3 | RNVC: 9

28 May 1985

5340-12-320-4155
Angle Bracket

123204155
0242 2322: RNCC: 3 | RNVC: 2
02422322KZ0148-44: RNCC: 5 | RNVC: 2

12 Jan 1990

5340-12-317-6558
Mounting Plate

123176558
4139 306 276: RNCC: 3 | RNVC: 2
7382903: RNCC: 5 | RNVC: 2
4139306276: RNCC: 5 | RNVC: 9

26 Apr 1989

5340-12-321-8816
Mounting Bracket

123218816
4353511740: RNCC: 3 | RNVC: 2

5 Jul 1990

5340-12-316-0897
Nonmetallic Bumper

123160897
P-M10957-003: RNCC: 3 | RNVC: 2
PM10957-003: RNCC: 5 | RNVC: 2

21 Dec 1988

5340-12-702-3936
Rod End Connector

127023936
VG95211-ML-127023936: RNCC: 2 | RNVC: 2
5.12.5303.0620.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-383-9505
Door Button

123839505
6.375-503.0: RNCC: 3 | RNVC: 2

28 Dec 2010

5340-12-388-5199
Loop Clamp

123885199
HRGKS1B114/73ST: RNCC: 3 | RNVC: 2

28 Mar 2012

5340-12-303-3070
Retaining Strap

123033070
P-875220-003: RNCC: 3 | RNVC: 2
P875220-003: RNCC: 5 | RNVC: 2

13 Mar 1985

5340-12-326-9776
Access Cover

123269776
702-241870-901-0: RNCC: 3 | RNVC: 2

15 Nov 1991

5340-12-389-9158
Mounting Bracket

123899158
2300571-189815.000.0: RNCC: 2 | RNVC: 2
2300571-189815.000.0: RNCC: 3 | RNVC: 2

12 Sep 2012

5340-12-171-1601
Door Closer

121711601
81626706006: RNCC: 3 | RNVC: 2
9257AE3: RNCC: 5 | RNVC: 2
81.62670-6006: RNCC: 5 | RNVC: 2
9257: RNCC: 5 | RNVC: 9
81626706004: RNCC: 5 | RNVC: 9
81.62670-6004: RNCC: 5 | RNVC: 9

12 Sep 1977

5340-12-172-7339
Rod End Clevis

121727339
02456659: RNCC: 3 | RNVC: 2
02456660: RNCC: 5 | RNVC: 2
2456659KZ5046-04: RNCC: 5 | RNVC: 2
2456660UD5046-04: RNCC: 5 | RNVC: 2

14 Feb 1978

5340-12-188-6676
Retaining Strap

121886676
DIN72573-1X8-ST-VERZINKT: RNCC: 2 | RNVC: 2
DIN72573-1X8-ST-VERZINKT: RNCC: 3 | RNVC: 2
DIN72573-1X8-ST-VERZINKT: RNCC: 3 | RNVC: 2
BSL1X8/72573VPE: RNCC: 3 | RNVC: 2
DIN72573-1X8-ST-GALZN8: RNCC: 5 | RNVC: 2
5128980108: RNCC: 5 | RNVC: 2
1X8DIN72573-ST-VERZINKT: RNCC: 5 | RNVC: 2
1X8DIN72573VZKT: RNCC: 5 | RNVC: 2
DIN72573-1X8-ST-GALZN8: RNCC: 5 | RNVC: 2

23 Jul 1981

5340-12-166-6214
Resilient Mount

121666214
DIN95363-C100X55-M12-NR55ST: RNCC: 2 | RNVC: 2
5112-53-02-15: RNCC: 5 | RNVC: 2
3410860EE5062-57: RNCC: 5 | RNVC: 2
E5112-53-02-15: RNCC: 5 | RNVC: 2
81120-100X55-M12.NR55.ST: RNCC: 5 | RNVC: 2
520047-M12-NR55.ST: RNCC: 5 | RNVC: 2
03410860: RNCC: 5 | RNVC: 2
VG95363-C100X55-M12-NR55ST: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-173-6952
Retaining Strap

121736952
C42280A239C20: RNCC: 3 | RNVC: 2
5800681-12-016: RNCC: 5 | RNVC: 2
5800681-12.016: RNCC: 5 | RNVC: 2
C42280-A239-C20: RNCC: 5 | RNVC: 2

3 May 1978

5340-12-174-0432
Dust And Moisture Seal Protective Cap

121740432
804-061-00-00-01: RNCC: 3 | RNVC: 2

31 May 1978

5340-12-363-5118
Retaining Strap

123635118
90467448-0807934: RNCC: 3 | RNVC: 2
807934: RNCC: 5 | RNVC: 9
90467448: RNCC: 5 | RNVC: 9

23 Jun 2004

5340-12-138-1021
Strap Fastener Loop

121381021
DIN6406-A30-ST-LACKIERT SCHWARZ: RNCC: 2 | RNVC: 2
448/7 SCHWARZ: RNCC: 3 | RNVC: 2
A30DIN6406STEINBRENNLACKIERTSW: RNCC: 5 | RNVC: 2
0062-003: RNCC: 5 | RNVC: 2
0062003: RNCC: 5 | RNVC: 2
3220050: RNCC: 5 | RNVC: 2
51045: RNCC: 5 | RNVC: 2
02600-STAHL LACKIERT SCHWARZ: RNCC: 5 | RNVC: 9
1000910-4073-3: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-2123
Helical Compression Spring Seat

123222123
0213 7096: RNCC: 3 | RNVC: 2
280.14.0718: RNCC: 5 | RNVC: 2
2137096ED0155-08: RNCC: 5 | RNVC: 2
02137096: RNCC: 5 | RNVC: 2
91501352: RNCC: 5 | RNVC: 2

1 Aug 1990

5340-12-164-5746
Catch Strike

121645746
730024-30.10: RNCC: 2 | RNVC: 2
730024-30-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-325-2292
Nonmetallic Solid Wheel

123252292
PO250/25P: RNCC: 3 | RNVC: 2
P0250/25P: RNCC: 5 | RNVC: 2

17 May 1991

5340-12-151-0652
Dust And Moisture Seal Protective Cap

121510652
5800359-010000-01: RNCC: 3 | RNVC: 2
5800359-010000.01: RNCC: 5 | RNVC: 9
5800359-010000-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-1900
Double Angle Bracket

123151900
6212851440: RNCC: 3 | RNVC: 2
621 285 14 40: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-334-8354
Nonmetallic Bumper

123348354
52.3109.807.02: RNCC: 2 | RNVC: 2
52.3109.807.02: RNCC: 3 | RNVC: 2

27 Jun 1994

5340-12-026-1607

5340-12-366-9344
Section Block Clamp

123669344
JN0413CDJ54: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-12-340-9899
Angle Bracket

123409899
20-5120-627: RNCC: 3 | RNVC: 2

12 Jul 1996

5340-12-331-1853
Flush Lock

123311853
229.20.403: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-12-164-0366

5340-12-354-1783
Angle Bracket

123541783
03886600: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-354-1157
Elastic Strap

123541157
5812A: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-12-301-7800
Angle Bracket

123017800
4-144732: RNCC: 3 | RNVC: 2

9 Nov 1984

5340-12-147-1383
Loop Clamp

121471383
12TAN15801-1-4544-9: RNCC: 3 | RNVC: 2
10N12TAN15801: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-199-8925
Spring Tension Clip

121998925
LZ215: RNCC: 3 | RNVC: 2

14 Jun 1984

5340-12-383-8516
Handle Grip

123838516
921511: RNCC: 3 | RNVC: 2

14 Dec 2010

5340-12-021-7907

5340-12-359-3214
Mounting Bracket

123593214
61138380213: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-12-093-6687

5340-12-304-9740
Nonmetallic Bumper

123049740
3099870040: RNCC: 3 | RNVC: 2

12 Sep 1985

5340-12-094-4379

5340-12-348-3477
Spring Tension Clip

123483477
209579: RNCC: 3 | RNVC: 2
4258990065: RNCC: 5 | RNVC: 2

4 Jun 1999

5340-12-300-8463
Angle Bracket

123008463
4253130042: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-343-0916
Nonmetallic Bumper

123430916
4100 3138: RNCC: 3 | RNVC: 2
41003138: RNCC: 5 | RNVC: 2
41003138EC50-4238: RNCC: 5 | RNVC: 2

28 Apr 1997

5340-12-352-0522
Spacing Threaded Standoff

123520522
54.0056.010.06: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-12-351-2242
Friction Catch

123512242
2500113-2612: RNCC: 2 | RNVC: 2
2500113-2612: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-329-5078
Spring Tension Clip

123295078
491-83-05: RNCC: 3 | RNVC: 2

26 Aug 1992

5340-12-365-1309
Mounting Bracket

123651309
009-078.149-004: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-12-349-4066
Dust And Moisture Seal Protective Cap

123494066
325G-111-T17: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-12-352-8134
Mending Plate

123528134
5400049-128300.09: RNCC: 3 | RNVC: 2

19 Dec 2000

5340-12-361-6722
Mounting Bracket

123616722
J53230322-003: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-199-0302
Mending Plate

121990302
5801549-2110.007: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-12-384-6936
Access Door Locking Ring

123846936
F1.1189-30-10-00.00-02: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-12-335-0509
Angle Bracket

123350509
0048-206000A01B: RNCC: 2 | RNVC: 2
0048-206000A01B: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-12-175-1006
Angle Bracket

121751006
4258810414: RNCC: 3 | RNVC: 2

23 Aug 1978

5340-12-325-0939
Shimmy Damper

123250939
082694 250N 43/87 B76: RNCC: 3 | RNVC: 9

30 Apr 1991

5340-12-347-1016
Nonmetallic Bumper

123471016
357412303E: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-12-337-9097
Dust And Moisture Seal Protective Plug

123379097
6739971186: RNCC: 3 | RNVC: 2

3 May 1995

5340-12-349-7722
Nonmetallic Bumper

123497722
15.6911.1903: RNCC: 3 | RNVC: 2
15.6911.1903: RNCC: 5 | RNVC: 2

6 Jan 2000

5340-12-319-8424
Strap Fastener Loop

123198424
71029: RNCC: 3 | RNVC: 2

9 Nov 1989

5340-12-377-7798
Manual Control Lever

123777798
841200453: RNCC: 3 | RNVC: 2

10 Feb 2009

5340-12-174-1131
Detent Plunger

121741131
4614913814: RNCC: 3 | RNVC: 2
0104996: RNCC: 5 | RNVC: 2
104996: RNCC: 5 | RNVC: 9

6 Jun 1978

5340-12-350-3309
Mounting Bracket

123503309
VG95211-ML-123503309: RNCC: 2 | RNVC: 2
160-714621: RNCC: 3 | RNVC: 2

16 Mar 2000

5340-12-321-9434
Mending Plate

123219434
702-241600-953-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-375-8018
Drawer Slide Set

123758018
DZ3607-0016-2: RNCC: 3 | RNVC: 2

7 Jul 2008

5340-12-348-6802
Retaining Strap

123486802
160-77850-03: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-12-347-5874
Nut And Bolt Locking Plate

123475874
594.50-300000-011: RNCC: 3 | RNVC: 2

12 Jan 1999

5340-12-702-2023
Angle Bracket

127022023
VG95211-ML-127022023: RNCC: 2 | RNVC: 2
30.7211.1112: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-314-7806
Nonmetallic Bumper

123147806
C42107-A435-B17: RNCC: 3 | RNVC: 2
35631020: RNCC: 3 | RNVC: 2

10 Aug 1988

5340-12-196-4364
Door Button

121964364
588.90-233007-001: RNCC: 3 | RNVC: 2

6 Jul 1983

5340-12-308-2861
Handwheel

123082861
532104-8301: RNCC: 3 | RNVC: 2
532104-8301: RNCC: 5 | RNVC: 9
532104-8301.000: RNCC: 5 | RNVC: 9

23 Sep 1986

5340-12-177-9553
Dust And Moisture Seal Protective Cap

121779553
97121-416Y: RNCC: 3 | RNVC: 2
97121-416Y: RNCC: 5 | RNVC: 9
97121-416Y: RNCC: 5 | RNVC: 9

9 Mar 1979

5340-12-158-4941
Pipe Bracket

121584941
26-752-002-10: RNCC: 3 | RNVC: 2
26-752-002-4: RNCC: 3 | RNVC: 2
26-752-002-10: RNCC: 5 | RNVC: 9
26-752-002-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-155-8413

5340-12-300-2134
Retaining Strap

123002134
3045060441: RNCC: 3 | RNVC: 2

14 Jul 1984

5340-12-319-2888
Nonmetallic Bumper

123192888
297914: RNCC: 3 | RNVC: 2

19 Sep 1989

5340-12-365-0697
Angle Bracket

123650697
4616930912: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-382-7248
Manual Control Lever

123827248
Z60006N010054: RNCC: 3 | RNVC: 2

30 Jul 2010

5340-12-390-2511
Plug Button

123902511
97117904A000: RNCC: 3 | RNVC: 2

22 Oct 2012

5340-12-319-3314
Nonmetallic Solid Wheel

123193314
1700013-20400.01: RNCC: 2 | RNVC: 2
297197: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-12-378-4076
Multiple Angle Bracket

123784076
504257578: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-12-383-8975
Hand Crank

123838975
213158: RNCC: 3 | RNVC: 2
A430409900079: RNCC: 5 | RNVC: 2
213158: RNCC: 5 | RNVC: 2

17 Dec 2010

5340-12-348-8085
Mounting Bracket

123488085
4183320240: RNCC: 3 | RNVC: 2

23 Aug 1999

5340-12-383-4527
Arched Cushion

123834527
77336: RNCC: 3 | RNVC: 2

22 Oct 2010

5340-12-303-4235
Retaining Strap

123034235
0003510040: RNCC: 3 | RNVC: 2
A0003510040: RNCC: 5 | RNVC: 2

21 Mar 1985

5340-12-348-6229
Shimmy Damper

123486229
0301061313080: RNCC: 3 | RNVC: 2
230901 0120N: RNCC: 5 | RNVC: 2

28 Jul 1999

5340-12-300-6743
Angle Bracket

123006743
4253300574: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-343-8593
Nonmetallic Bumper

123438593
0000.9055.104: RNCC: 3 | RNVC: 2
0000.9055.070: RNCC: 5 | RNVC: 9

6 Aug 1997

5340-12-175-2298
Retaining Strap

121752298
4045852037: RNCC: 3 | RNVC: 2

4 Sep 1978

5340-12-360-9025
Retaining Strap

123609025
15390401: RNCC: 3 | RNVC: 2
DMKD 21: RNCC: 5 | RNVC: 2

22 Jul 2003

5340-12-357-6312
Multiple Angle Bracket

123576312
028103941: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-176-3264
Loop Clamp

121763264
LN9490B32: RNCC: 2 | RNVC: 2

23 Nov 1978

5340-12-193-5539
Dust And Moisture Seal Protective Cap

121935539
M20NR.620SCHWARZ: RNCC: 3 | RNVC: 2
1000/1077: RNCC: 3 | RNVC: 2
1077: RNCC: 5 | RNVC: 2
1077-GPN1000: RNCC: 5 | RNVC: 2
620: RNCC: 5 | RNVC: 2
100107700: RNCC: 5 | RNVC: 2
GPN1000-1077: RNCC: 5 | RNVC: 2
GPN1000/1077: RNCC: 5 | RNVC: 2

3 Aug 1982

5340-12-330-0944
Butt Hinge Leaf

123300944
VG95211-ML-123300944: RNCC: 2 | RNVC: 2
65200-09004Y101: RNCC: 3 | RNVC: 2
65200-09004Y101: RNCC: 5 | RNVC: 2

3 Nov 1992

5340-12-173-6908
Flush Catch Claw

121736908
4178476: RNCC: 3 | RNVC: 2
S12BG01-09-02-000: RNCC: 5 | RNVC: 2

3 May 1978

5340-12-318-1672
Bow Handle

123181672
AFG0348410: RNCC: 3 | RNVC: 2
034841: RNCC: 5 | RNVC: 2
AFG0348367-01-04: RNCC: 5 | RNVC: 2

16 Jun 1989

5340-12-702-2099
Mounting Bracket

127022099
VG95211-ML-127022099: RNCC: 2 | RNVC: 2
30.7215.90: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-393-5078
Angle Bracket

123935078
4055451540: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-383-4214
Mounting Bracket

123834214
76151: RNCC: 3 | RNVC: 2

19 Oct 2010

5340-12-169-1800
Flexible Surface Mechanical Patch

121691800
251: RNCC: 3 | RNVC: 9

20 Apr 1977

5340-12-360-1299
Mounting Bracket

123601299
9424306110: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-316-1546
Retaining Strap

123161546
3855280421: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-322-0918
Butt Hinge

123220918
307.601-60416.09: RNCC: 3 | RNVC: 2
307.601-60416.09: RNCC: 5 | RNVC: 9

24 Jul 1990

5340-12-304-0759
Rod End Clevis

123040759
81954900056: RNCC: 3 | RNVC: 2
16197809: RNCC: 5 | RNVC: 2

10 Jun 1985

5340-12-198-8885
Mending Plate

121988885
8331501573: RNCC: 3 | RNVC: 2

9 Mar 1984

5340-12-381-7911
Webbing Strap

123817911
1049075-7440: RNCC: 3 | RNVC: 2

31 Mar 2010

5340-12-150-5171
Resilient Mount

121505171
8382230912: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-044-5844

5340-12-325-0267
Dust And Moisture Seal Protective Cap

123250267
12549: RNCC: 3 | RNVC: 2
50009132: RNCC: 5 | RNVC: 2
12549, FORM NO. 4873: RNCC: 5 | RNVC: 9
4873: RNCC: 5 | RNVC: 9
FORM NR. 4873: RNCC: 5 | RNVC: 9

23 Apr 1991

5340-12-387-5795
Retaining Strap

123875795
61392: RNCC: 3 | RNVC: 2

11 Jan 2012

5340-12-365-1545
Spring Tension Clip

123651545
0005463843: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-360-2847
Access Cover

123602847
4110611619: RNCC: 3 | RNVC: 2

5 May 2003

5340-12-391-4363
Access Cover

123914363
I006186TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-319-6088
Helical Compression Spring Seat

123196088
03060501: RNCC: 3 | RNVC: 2
03060500: RNCC: 5 | RNVC: 2
03060501.294: RNCC: 5 | RNVC: 9

18 Oct 1989

5340-12-388-1694
Butt Hinge

123881694
218-9218: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-12-300-2753
Support Hook

123002753
27 0336 026: RNCC: 2 | RNVC: 2
9846688: RNCC: 3 | RNVC: 2
27 0336 026: RNCC: 5 | RNVC: 9
9846688: RNCC: 5 | RNVC: 9

20 Jul 1984

5340-12-379-3924
Access Door Hinge

123793924
501254: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-305-4713

5340-12-141-6846

5340-12-164-5958

5340-12-312-4857
Helical Compression Spring Retainer

123124857
2420500021: RNCC: 3 | RNVC: 2

12 Jan 1988

5340-12-318-0700
Dust And Moisture Seal Protective Cap

123180700
1120505000: RNCC: 3 | RNVC: 2
81.26121.0036: RNCC: 5 | RNVC: 2
81261210036: RNCC: 5 | RNVC: 2

8 Jun 1989

5340-12-377-7029
Manual Control Lever

123777029
81671060003: RNCC: 3 | RNVC: 2

4 Feb 2009

5340-12-327-1745
Clamp Bolt Assembly

123271745
160-80123: RNCC: 3 | RNVC: 2
160-80123: RNCC: 5 | RNVC: 9

11 Dec 1991

5340-12-026-7456

5340-12-197-0707
Snap Hook

121970707
53.3031.031.04: RNCC: 3 | RNVC: 2
53.3031.031.04: RNCC: 5 | RNVC: 9

15 Sep 1983

5340-12-316-9997
Mounting Bracket

123169997
2300279-5031.00: RNCC: 2 | RNVC: 2
2300279-5031.00: RNCC: 3 | RNVC: 2
2300279-5031.00: RNCC: 5 | RNVC: 9
9869732: RNCC: 5 | RNVC: 9

2 Mar 1989

5340-12-343-7934
Multiple Angle Bracket

123437934
DFAP019: RNCC: 3 | RNVC: 2

29 Jul 1997

5340-12-702-9372
Dust And Moisture Seal Protective Cap

127029372
VG95211-ML-127029372: RNCC: 2 | RNVC: 2
N1168-24X1,5: RNCC: 3 | RNVC: 2
0500800953859: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-352-5832
Mounting Bracket

123525832
5600023-180151.000.0: RNCC: 2 | RNVC: 2
5600023-180151.000.0: RNCC: 3 | RNVC: 2
1271636: RNCC: 5 | RNVC: 2
22012.0.01.300.00: RNCC: 5 | RNVC: 9

28 Nov 2000

5340-12-158-9423
Rod End Clevis

121589423
AM647-32-4: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-171-1604
Door Button

121711604
23230-172439.009.0: RNCC: 2 | RNVC: 2
81971200015: RNCC: 3 | RNVC: 2
81.97120.0015: RNCC: 5 | RNVC: 2
23230-172439-009-0: RNCC: 5 | RNVC: 9
23230-172439.009.0: RNCC: 5 | RNVC: 9

12 Sep 1977

5340-12-701-5857
Rod End Connector

127015857
VG95211-ML-127015857: RNCC: 2 | RNVC: 2
5.12.6500.0330.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-314-4636
Mending Plate

123144636
P-146245-007: RNCC: 3 | RNVC: 2
P146245-007: RNCC: 5 | RNVC: 2

8 Jul 1988

5340-12-314-3206
Resilient Mount

123143206
DIN95369-A3-7-CR-ST: RNCC: 2 | RNVC: 2
151005-M10-CR.ST-90: RNCC: 5 | RNVC: 2
60-200-090: RNCC: 5 | RNVC: 2
VG95369-A3-7-CR-ST: RNCC: 5 | RNVC: 9
C2150: RNCC: 5 | RNVC: 9
C2150 M10: RNCC: 5 | RNVC: 9

25 Jun 1988

5340-12-309-8225
Webbing Strap

123098225
2300121-983220.000.0: RNCC: 2 | RNVC: 2
2300121-983220.000.0: RNCC: 3 | RNVC: 2
000-D6-25X1,0X280-BW-RAL6031: RNCC: 6 | RNVC: 9

6 Mar 1987

5340-12-151-3228
Nonmetallic Bumper

121513228
156035: RNCC: 3 | RNVC: 2
6031-402-022-4: RNCC: 3 | RNVC: 2
837.080.040.020.PUR80: RNCC: 3 | RNVC: 2
E6031.402.022.4: RNCC: 5 | RNVC: 2
6031-402-022-3: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-318-2489
Snap Hook

123182489
DIN5287-A40ZN: RNCC: 2 | RNVC: 2
4293 1/2-40ZINK: RNCC: 3 | RNVC: 9
215.131429: RNCC: 5 | RNVC: 2
13.1429: RNCC: 5 | RNVC: 9
131429: RNCC: 5 | RNVC: 9

22 Jun 1989

5340-12-390-4127
Access Cover

123904127
2300559-188610.000.0: RNCC: 2 | RNVC: 2
2300559-188610.000.0: RNCC: 3 | RNVC: 2

9 Nov 2012

5340-12-332-8393
Mounting Plate

123328393
016-22-161000-03: RNCC: 3 | RNVC: 2
4-016-22/161000.03: RNCC: 5 | RNVC: 2
4-016-22/161000.03: RNCC: 5 | RNVC: 9
016-22-161000-03: RNCC: 5 | RNVC: 9

24 Sep 1993

5340-12-184-2113
Dust And Moisture Seal Protective Cap

121842113
320307: RNCC: 3 | RNVC: 2
11-06-06-1-19: RNCC: 5 | RNVC: 2
11-06-1: RNCC: 5 | RNVC: 2
7103-0006-320307: RNCC: 5 | RNVC: 2
H42019: RNCC: 5 | RNVC: 2

3 Jul 1980

5340-12-306-4297
Lock-Release Lever

123064297
103-624-0003-000: RNCC: 3 | RNVC: 2
351-002-621410-001-0: RNCC: 5 | RNVC: 9

28 Feb 1986

5340-12-348-6126
Clamping Catch

123486126
112L01-3-2BB: RNCC: 3 | RNVC: 2
610-12701: RNCC: 5 | RNVC: 2

26 Jul 1999

Load More Results