What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 45 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 45 of 178

5340-12-050-0793

5340-12-044-0972

5340-12-192-6184
Clamping Catch

121926184
01102307: RNCC: 3 | RNVC: 2
1102307EE8935-32: RNCC: 5 | RNVC: 2
N92056U: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-381-6790
Blank Panel

123816790
BRR23913: RNCC: 3 | RNVC: 2

17 Mar 2010

5340-12-367-8617
Nonmetallic Bumper

123678617
331350400: RNCC: 3 | RNVC: 2

25 Oct 2005

5340-12-044-3479

5340-12-313-6900
Door Handle

123136900
5800145: RNCC: 3 | RNVC: 2
1242605: RNCC: 5 | RNVC: 2
580K0265: RNCC: 5 | RNVC: 2

26 Apr 1988

5340-12-393-3055
Bow Handle

123933055
35551: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-315-3144
Gummi- Riemen

123153144
SBH35X4X790: RNCC: 3 | RNVC: 2

12 Oct 1988

5340-12-166-2822
Pipe Bracket

121662822
269012061200: RNCC: 3 | RNVC: 2
269012061200: RNCC: 5 | RNVC: 2

19 Aug 1976

5340-12-314-5455
Angle Bracket

123145455
3974290040: RNCC: 3 | RNVC: 2
397 429 00 40: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-363-4015
Manual Control Lever

123634015
SP23000: RNCC: 3 | RNVC: 2

8 Jun 2004

5340-12-199-3288
Angle Bracket

121993288
3143010440: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-12-335-1050
Pipe Hanger

123351050
275.816: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-12-025-1429

5340-12-372-1478
Pad Eye

123721478
S322I30A1215: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-12-187-4783
Loop Clamp

121874783
PAN4231CJ4028: RNCC: 3 | RNVC: 2

8 Apr 1981

5340-12-092-0536

5340-12-375-6873
Loop Clamp

123756873
000000003085: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-12-327-2013
Extension Drawer Slide

123272013
BD9102E373: RNCC: 3 | RNVC: 2
BD9102E373: RNCC: 5 | RNVC: 9

16 Dec 1991

5340-12-301-2198
Angle Bracket

123012198
P-855017-001: RNCC: 3 | RNVC: 2
P855017-001: RNCC: 5 | RNVC: 2

28 Sep 1984

5340-12-313-6646
Block Clamp

123136646
P-896398-021: RNCC: 3 | RNVC: 2
P896398-021: RNCC: 5 | RNVC: 2

23 Apr 1988

5340-12-144-0735
Retaining Strap

121440735
VG95933AR-22-W1-BK: RNCC: 2 | RNVC: 2
1/1D22MMN325: RNCC: 3 | RNVC: 2
700325022100: RNCC: 3 | RNVC: 2
MMN325-1-1D22: RNCC: 5 | RNVC: 2
MMN325-1-1D9-22: RNCC: 5 | RNVC: 2
1-1D22MMN325: RNCC: 5 | RNVC: 2
1-1D22MMN325: RNCC: 5 | RNVC: 2
MMN325-1-1D22: RNCC: 5 | RNVC: 2
MMN325-1-1D9-22: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-313-0193
Double Angle Bracket

123130193
P-086148-016: RNCC: 3 | RNVC: 2
P086148-016: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-702-4208
Mounting Bracket

127024208
VG95211-ML-127024208: RNCC: 2 | RNVC: 2
5.12.7080.1280.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-355-8982
Loop Clamp

123558982
0004900841: RNCC: 3 | RNVC: 2

2 Jan 2002

5340-12-329-5886
Mending Plate

123295886
158227: RNCC: 2 | RNVC: 2
158227: RNCC: 3 | RNVC: 2

4 Sep 1992

5340-12-331-8043
Plain Solid Disk

123318043
1362001: RNCC: 3 | RNVC: 2
EZ 13620: RNCC: 5 | RNVC: 2

23 Jun 1993

5340-12-348-2446
Mounting Bracket

123482446
220293-4000: RNCC: 3 | RNVC: 2

12 May 1999

5340-12-390-7223
Buckle

123907223
71769: RNCC: 3 | RNVC: 2
7113046: RNCC: 5 | RNVC: 2

6 Dec 2012

5340-12-365-7085
Manual Control Handle

123657085
9437510070: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-187-8563
Dust And Moisture Seal Protective Plug

121878563
14861.42044: RNCC: 3 | RNVC: 2
14861: RNCC: 5 | RNVC: 2

13 May 1981

5340-12-323-8777
Mounting Bracket

123238777
0415 4610: RNCC: 3 | RNVC: 2

3 Jan 1991

5340-12-392-8904
Mounting Bracket

123928904
2324444000: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-12-323-8296
Extension Drawer Slide

123238296
78650: RNCC: 3 | RNVC: 2
78650: RNCC: 3 | RNVC: 9

21 Dec 1990

5340-12-380-5344
Plain Solid Disk

123805344
8832030152: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-12-363-5795
Angle Bracket

123635795
0240 7736: RNCC: 3 | RNVC: 2
571260977: RNCC: 5 | RNVC: 2

6 Jul 2004

5340-12-172-8142
Loop Clamp

121728142
LN9490BK5: RNCC: 2 | RNVC: 2

22 Feb 1978

5340-12-199-9045
Angle Bracket

121999045
6146199: RNCC: 3 | RNVC: 2
614.6199: RNCC: 5 | RNVC: 2

15 Jun 1984

5340-12-094-9489

5340-12-043-9096

5340-12-187-4784
Loop Clamp

121874784
PAN4231B17B17: RNCC: 3 | RNVC: 2

8 Apr 1981

5340-12-313-4623
Cane Bolt

123134623
2300013-6505.00: RNCC: 2 | RNVC: 2
2300013-6505.00: RNCC: 3 | RNVC: 2
2300013-6505.00: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-305-1842
Double Angle Bracket

123051842
1000173-382203.001.0: RNCC: 2 | RNVC: 2
85023-01.03.01.0: RNCC: 3 | RNVC: 2
85023-01.03.01.0: RNCC: 5 | RNVC: 9

4 Oct 1985

5340-12-197-2171
Webbing Strap

121972171
4200049-17113: RNCC: 2 | RNVC: 2
123912: RNCC: 3 | RNVC: 2
400-848.1059.3: RNCC: 5 | RNVC: 2

3 Oct 1983

5340-12-703-2064
Mounting Bracket

127032064
VG95211-ML-127032064: RNCC: 2 | RNVC: 2
5.12.5313.2980.03: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-304-7197
Pipe Bracket

123047197
704-121370-000-0: RNCC: 3 | RNVC: 2

15 Aug 1985

5340-12-343-8433
Shimmy Damper

123438433
WRYUG2133: RNCC: 3 | RNVC: 2
MB 28200AAPX: RNCC: 3 | RNVC: 2

4 Aug 1997

5340-12-196-9197
Helical Compression Spring Seat

121969197
4113200026: RNCC: 3 | RNVC: 2

30 Aug 1983

5340-12-342-5372
Retaining Strap

123425372
893253139: RNCC: 3 | RNVC: 9

25 Feb 1997

5340-12-319-3610
Shimmy Damper

123193610
5187470: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-12-331-8481
Door Closer

123318481
C21.0033.00: RNCC: 3 | RNVC: 2
6017200116: RNCC: 5 | RNVC: 2
6017200216: RNCC: 5 | RNVC: 2
21.0033.00: RNCC: 5 | RNVC: 2

28 Jun 1993

5340-12-363-3722
Rod End Clevis

123633722
941316908: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-12-010-0927

5340-12-010-0771

5340-12-010-0884

5340-12-135-6680
Snap Hook

121356680
DIN5299-C120ZN: RNCC: 2 | RNVC: 2
524606: RNCC: 3 | RNVC: 2
DIN5299-C120-ZN: RNCC: 3 | RNVC: 2
245-120X11 VERZINKT: RNCC: 3 | RNVC: 9
63218013: RNCC: 5 | RNVC: 2
245-120X11-VERZINKT: RNCC: 5 | RNVC: 9
3218/013: RNCC: 5 | RNVC: 9
245: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-340-2481
Strap Fastener Loop

123402481
AFG0314259: RNCC: 3 | RNVC: 2
AFG-06-29-00-00-16: RNCC: 5 | RNVC: 2

19 Mar 1996

5340-12-309-4613
Mending Plate

123094613
5803457-3000.02: RNCC: 2 | RNVC: 2
7802085302: RNCC: 3 | RNVC: 2
78020-85302: RNCC: 5 | RNVC: 9

27 Jan 1987

5340-12-196-7710
Angle Bracket

121967710
P-296874-450: RNCC: 3 | RNVC: 2
P296874-450: RNCC: 5 | RNVC: 2

15 Aug 1983

5340-12-186-2925
Mending Plate

121862925
CF466933: RNCC: 3 | RNVC: 2
CF 466 933: RNCC: 5 | RNVC: 2
CF466933: RNCC: 5 | RNVC: 2
CF 466 933: RNCC: 5 | RNVC: 2

13 Dec 1980

5340-12-332-7096
Double Angle Bracket

123327096
7180380: RNCC: 3 | RNVC: 2

9 Sep 1993

5340-12-309-2550
Retaining Bail

123092550
4804838961: RNCC: 3 | RNVC: 2
7701028254: RNCC: 5 | RNVC: 2

6 Jan 1987

5340-12-337-9309
Lock-Release Lever

123379309
4625401: RNCC: 3 | RNVC: 2
EZ46254: RNCC: 5 | RNVC: 2

3 May 1995

5340-12-358-9213
Angle Bracket

123589213
3854131142: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-350-4064
Dust And Moisture Seal Protective Cap

123504064
RC003202: RNCC: 3 | RNVC: 2

28 Mar 2000

5340-12-193-5507
Dust And Moisture Seal Protective Cap

121935507
01TC31783: RNCC: 3 | RNVC: 2

3 Aug 1982

5340-12-302-7918
Detent Plunger

123027918
178.E53.80A: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-371-5910
Retaining Clip

123715910
T881M4032209: RNCC: 2 | RNVC: 2
T881M4032209: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-12-373-3918
Electronic Equipment Hardware Kit

123733918
L761M1002102: RNCC: 3 | RNVC: 2

29 Oct 2007

5340-12-352-0200
Mounting Bracket

123520200
SZ2508000: RNCC: 3 | RNVC: 2
SZ 2508.000: RNCC: 5 | RNVC: 2
SZ 2508: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-12-044-1572

5340-12-370-2149
Mounting Plate

123702149
21397-T01: RNCC: 3 | RNVC: 2

4 Oct 2006

5340-12-344-3483
Double Angle Bracket

123443483
81252450129: RNCC: 3 | RNVC: 2
81.25245.0129: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-355-4277
Mounting Bracket

123554277
1250 321 025: RNCC: 3 | RNVC: 2
1250321025: RNCC: 5 | RNVC: 9

14 Nov 2001

5340-12-344-0179
Mounting Bracket

123440179
2996.72.45: RNCC: 3 | RNVC: 2
2996.7245: RNCC: 5 | RNVC: 2

29 Aug 1997

5340-12-188-9964
Angle Bracket

121889964
9457646: RNCC: 3 | RNVC: 2
09570000501: RNCC: 5 | RNVC: 2
F300 0T 001 2886: RNCC: 6 | RNVC: 9

17 Aug 1981

5340-12-339-8976
Access Cover

123398976
537261-8008.000: RNCC: 3 | RNVC: 9
537261-8008.000: RNCC: 5 | RNVC: 9

30 Jan 1996

5340-12-700-5060
Flush Lock

127005060
VG95211-ML-127005060: RNCC: 2 | RNVC: 2
5.12.0100.8000.00: RNCC: 3 | RNVC: 2
0501400111390: RNCC: 5 | RNVC: 2

19 Sep 1992

5340-12-141-4061
Ball Socket Seat

121414061
DIN71805-B16PHRE: RNCC: 2 | RNVC: 2
DIN71805-B16-PHRE: RNCC: 3 | RNVC: 2
B16DIN71805PHRE: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-317-7667
Mounting Bracket

123177667
P-297201-471: RNCC: 3 | RNVC: 2
P297201-471: RNCC: 5 | RNVC: 2

11 May 1989

5340-12-340-0325
Loop Clamp

123400325
DIN3015-LH-K1R-12-PP-W5: RNCC: 2 | RNVC: 2
RAPR18-112-W5: RNCC: 3 | RNVC: 2
112A-PP-SIG-AF-W5: RNCC: 3 | RNVC: 2
DIN3015-L-H-1-R-12-PP-W4: RNCC: 5 | RNVC: 2
DIN3015-LH-1R-12-PP-W4: RNCC: 5 | RNVC: 2
RAPR18-112-W5: RNCC: 5 | RNVC: 2
112A-PP-SIG-AF-W4: RNCC: 5 | RNVC: 2
DIN3015-L-H-1-12-PP-W4: RNCC: 5 | RNVC: 9

16 Feb 1996

5340-12-309-5448
Angle Bracket

123095448
A-231197-006: RNCC: 3 | RNVC: 2
A231197-006: RNCC: 5 | RNVC: 2

3 Feb 1987

5340-12-313-0157
Double Angle Bracket

123130157
P-086147-088: RNCC: 3 | RNVC: 2
P086147-088: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-162-1404
Loop Clamp

121621404
0257644: RNCC: 3 | RNVC: 2
DZ0257644: RNCC: 5 | RNVC: 2
CZ41-26-5: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-194-9439
Mending Plate

121949439
42-1543-191900.01.0: RNCC: 3 | RNVC: 2
42-1543-191900-01-0: RNCC: 5 | RNVC: 2
42-1543-191900-01-0: RNCC: 5 | RNVC: 9

21 Dec 1982

5340-12-341-8464
Angle Bracket

123418464
11.44744-0334: RNCC: 3 | RNVC: 2
F11.44744-0334: RNCC: 5 | RNVC: 2
11.44744-0334: RNCC: 5 | RNVC: 9

1 Nov 1996

5340-12-702-6027
Loop Clamp

127026027
VG95211-ML-127026027: RNCC: 2 | RNVC: 2
5167A-10-1: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-180-3782
Cremone Bolt

121803782
3147600161: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-12-348-7430
Angle Bracket

123487430
5900980626: RNCC: 3 | RNVC: 2

12 Aug 1999

5340-12-319-3811
Mending Plate

123193811
5802006-662000.03: RNCC: 2 | RNVC: 2
5802006-662000.03: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-309-5841
Helical Compression Spring Seat

123095841
1000104-212300.04: RNCC: 3 | RNVC: 2
1000104-212300.04: RNCC: 5 | RNVC: 9

5 Feb 1987

5340-12-375-8726
Metal Grille

123758726
BD4029T342: RNCC: 3 | RNVC: 2
BD4029T342: RNCC: 5 | RNVC: 9

15 Jul 2008

5340-12-392-7223
Dust And Moisture Seal Protective Cap-Plug

123927223
GPN600B890-RAL3000: RNCC: 3 | RNVC: 2
600B890RAL3000: RNCC: 5 | RNVC: 2

2 Jul 2013

5340-12-385-0702
Mending Plate

123850702
2334954000: RNCC: 3 | RNVC: 2

27 Apr 2011

5340-12-378-8652
Double Angle Bracket

123788652
90.5207.0947: RNCC: 3 | RNVC: 2
90.5207.0947: RNCC: 5 | RNVC: 2

20 May 2009

5340-12-375-5834
Bow Handle

123755834
L246M2016101: RNCC: 3 | RNVC: 2

16 Jun 2008

5340-12-388-7757
Retaining Strap

123887757
1310582A: RNCC: 3 | RNVC: 2

20 Apr 2012

5340-12-336-6586
Double Angle Bracket

123366586
181082795: RNCC: 2 | RNVC: 2
181082795: RNCC: 3 | RNVC: 2
D181082795: RNCC: 5 | RNVC: 9

6 Dec 1994

5340-12-022-8059

5340-12-022-1474

5340-12-386-7266
Manual Control Handle

123867266
ETSHBH14: RNCC: 3 | RNVC: 2

27 Sep 2011

5340-12-315-8030
Angle Bracket

123158030
2623001: RNCC: 3 | RNVC: 2
26230 01: RNCC: 5 | RNVC: 2

26 Nov 1988

5340-12-302-7906
Mending Plate

123027906
178.E55.80: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-191-2012
Plain Solid Disk

121912012
4-87905: RNCC: 3 | RNVC: 2

18 Jan 1982

5340-12-180-8120
Resilient Mount

121808120
684164: RNCC: 3 | RNVC: 9

4 Oct 1979

5340-12-351-4999
Nonmetallic Bumper

123514999
1159870340: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-180-1852
Catch Strike

121801852
81618510003: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-12-139-7266
Halter

121397266
17873: RNCC: 3 | RNVC: 2
17873: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-183-4736
Rigid Caster

121834736
1000093-31000.05.0: RNCC: 2 | RNVC: 2
1000093-31000.05.0: RNCC: 3 | RNVC: 2
1000093-31000-05-0: RNCC: 3 | RNVC: 2
1000093-31000-05-0: RNCC: 5 | RNVC: 9
1000093-31000.05.0: RNCC: 5 | RNVC: 9

22 Apr 1980

5340-12-355-7438
Mounting Bracket

123557438
P-876375-003: RNCC: 3 | RNVC: 2
P876375-003: RNCC: 5 | RNVC: 2

12 Dec 2001

5340-12-184-7741
Dust And Moisture Seal Protective Plug

121847741
9043 3 261-00: RNCC: 3 | RNVC: 2
90433261-00: RNCC: 5 | RNVC: 2
9043 3 261-00: RNCC: 5 | RNVC: 9
90433261-00: RNCC: 5 | RNVC: 9

16 Aug 1980

5340-12-701-5761
Retaining Strap

127015761
VG95211-ML-127015761: RNCC: 2 | RNVC: 2
5.12.6402.8000.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-149-9036
Resilient Mount

121499036
DIN95369-A2-2-CR-ST: RNCC: 2 | RNVC: 2
151003-M10-CR.ST-50: RNCC: 5 | RNVC: 2
60-101-050: RNCC: 5 | RNVC: 2
C1015G: RNCC: 5 | RNVC: 2
VG95369-A2-2-CR-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-145-6197
Webbing Strap

121456197
23176-262265.00.0: RNCC: 2 | RNVC: 2
82300-23176-262265.00.0: RNCC: 3 | RNVC: 2
23176-262265-00-0: RNCC: 5 | RNVC: 2
23176-262265-00-0: RNCC: 5 | RNVC: 9
23176-262265.00.0: RNCC: 5 | RNVC: 9
82300-B380X20-NBR-ST-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-143-6379
Loop Clamp

121436379
DIN3016-1-D1-46X25-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-46X25-W1-2: RNCC: 3 | RNVC: 2
RSGU1.46/25: RNCC: 3 | RNVC: 2
0009952501: RNCC: 5 | RNVC: 2
BRSGU46/25N16016: RNCC: 5 | RNVC: 2
9410025046: RNCC: 5 | RNVC: 2
RSGU1100-46-25: RNCC: 5 | RNVC: 2
DIN3016-D1-46X25-W1-2: RNCC: 5 | RNVC: 9
VG95931-D46X25-W1: RNCC: 5 | RNVC: 9
VG95931D46X25W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-0543
Angle Bracket

123050543
P-230330-001: RNCC: 3 | RNVC: 2
P230330-001: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-164-3960
Pad Eye

121643960
2360-381000.10.0: RNCC: 2 | RNVC: 2
2360-381000-10-0: RNCC: 5 | RNVC: 2
2360-381000.10.0: RNCC: 5 | RNVC: 2
2360-381000.10.0: RNCC: 5 | RNVC: 2
2360-381000-10-0: RNCC: 5 | RNVC: 9
2360-381000.10.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-040-4687

5340-12-363-9939
Retaining Strap

123639939
700325050200: RNCC: 3 | RNVC: 2

10 Aug 2004

5340-12-091-3324

5340-12-375-6688
Access Cover

123756688
L258M2833101: RNCC: 3 | RNVC: 2

23 Jun 2008

5340-12-385-5475
Turnbuckle

123855475
420010104: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-12-162-7573

5340-12-318-0177
Angle Bracket

123180177
51974800262: RNCC: 3 | RNVC: 2
51.97480.0262: RNCC: 5 | RNVC: 2

5 Jun 1989

5340-12-319-6905
Helical Compression Spring Seat

123196905
PDP-T101: RNCC: 3 | RNVC: 2

25 Oct 1989

5340-12-347-9402
Mending Plate

123479402
54.0058.765.06: RNCC: 3 | RNVC: 2

16 Mar 1999

5340-12-091-7016

5340-12-196-9819
Angle Bracket

121969819
4900059-121410.000.0: RNCC: 3 | RNVC: 2
4900059-121410-000-0: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-185-5397
Bow Handle

121855397
02-0899-181450-00-0: RNCC: 3 | RNVC: 2

14 Oct 1980

5340-12-701-8096
Mounting Plate

127018096
VG95211-ML-127018096: RNCC: 2 | RNVC: 2
5.12.8800.1110.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-5918
Loop Clamp

127015918
VG95211-ML-127015918: RNCC: 2 | RNVC: 2
5.12.6501.0891.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-324-2418
Turnbuckle Body

123242418
199.194: RNCC: 3 | RNVC: 2
199194: RNCC: 5 | RNVC: 2

30 Jan 1991

5340-12-359-8231
Mounting Bracket

123598231
291827163A: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-12-351-0669
Spacing Threaded Standoff

123510669
2500113-2660.07: RNCC: 2 | RNVC: 2
2500113-2660.07: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-12-324-9374
Protection Bellows

123249374
1557TH56K: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-12-304-2568
Corner Brace

123042568
5802079-860: RNCC: 2 | RNVC: 2
5802079-860: RNCC: 3 | RNVC: 2
5802079-860: RNCC: 5 | RNVC: 9

3 Jul 1985

5340-12-173-6917
Rigid Caster

121736917
126A6-88NY: RNCC: 3 | RNVC: 2

3 May 1978

5340-12-362-3072
Loop Clamp

123623072
LN9490BK24: RNCC: 2 | RNVC: 2

5 Feb 2004

5340-12-302-0951
Double Angle Bracket

123020951
068199293D: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-12-169-1673
Electrical-Mechanical Equipment Post

121691673
5700079: RNCC: 3 | RNVC: 2

20 Apr 1977

5340-12-392-2130
Mounting Bracket

123922130
DW 410 186 AE: RNCC: 3 | RNVC: 2
DW 410 186 AE: RNCC: 5 | RNVC: 2

16 May 2013

5340-12-366-7961
Mounting Bracket

123667961
5841800340: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-12-371-9202
Webbing Strap

123719202
200.0504.03.00.00: RNCC: 3 | RNVC: 2
2300074-4401.00: RNCC: 5 | RNVC: 2
2300074-4401.00: RNCC: 5 | RNVC: 9

30 May 2007

5340-12-306-0897
Angle Bracket

123060897
5801611-711700.01: RNCC: 2 | RNVC: 2
5801611-711700.01: RNCC: 3 | RNVC: 2

27 Jan 1986

5340-12-323-2224
Angle Bracket

123232224
100016737: RNCC: 3 | RNVC: 2

2 Nov 1990

5340-12-020-7563

5340-12-391-3327
Loop Clamp

123913327
02015PP: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-12-359-4604
Retaining Strap

123594604
A3618023100200: RNCC: 3 | RNVC: 2

6 Feb 2003

5340-12-346-1633
Mounting Bracket

123461633
TA3019P002: RNCC: 3 | RNVC: 2

22 Jun 1998

5340-12-345-5862
Mounting Bracket

123455862
TA3104P001: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-350-8140
Mounting Plate

123508140
105-961315: RNCC: 3 | RNVC: 2

24 May 2000

5340-12-392-2270
Webbing Strap

123922270
4618902577: RNCC: 3 | RNVC: 2
4618902577: RNCC: 5 | RNVC: 2

16 May 2013

5340-12-190-4646
Compression Cup

121904646
121003: RNCC: 3 | RNVC: 2
E19121003: RNCC: 5 | RNVC: 2
E19121003: RNCC: 5 | RNVC: 9

30 Nov 1981

5340-12-360-0013
Mounting Bracket

123600013
9414294569: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-365-8537
Expansion Plug

123658537
50300801: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-12-322-3838
Retaining Strap

123223838
9000 8285: RNCC: 3 | RNVC: 2

16 Aug 1990

5340-12-182-1324
Platte

121821324
4115420340: RNCC: 3 | RNVC: 2

14 Jan 1980

5340-12-304-7499
Mending Plate

123047499
015093409: RNCC: 3 | RNVC: 2

19 Aug 1985

5340-12-351-0521
Mounting Bracket

123510521
4377900214: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-311-9223
Hand Crank

123119223
321837581A: RNCC: 3 | RNVC: 9

29 Oct 1987

5340-12-136-1050
Retaining Strap

121361050
4045800190: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-393-7175
Mounting Bracket

123937175
11.44086-1846: RNCC: 3 | RNVC: 2
11.44086-1846: RNCC: 5 | RNVC: 2

7 Oct 2013

5340-12-149-1069
Mending Plate

121491069
121L17004: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-701-6615
Mounting Plate

127016615
VG95211-ML-127016615: RNCC: 2 | RNVC: 2
5.12.7210.1211.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-3788
Loop Clamp

123213788
1212 4074: RNCC: 3 | RNVC: 2
31.1071-14.4: RNCC: 5 | RNVC: 2

11 May 1990

5340-12-302-0057
Angle Bracket

123020057
T04.6/1603RECHTS: RNCC: 3 | RNVC: 2
T04.6/1603RECHTS: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-12-151-9653
Loop Clamp

121519653
7C: RNCC: 3 | RNVC: 2
25704-350000T177: RNCC: 5 | RNVC: 2
7CFBN18102N2501: RNCC: 5 | RNVC: 2
211-15070: RNCC: 5 | RNVC: 2
7C: RNCC: 5 | RNVC: 2
G0051889: RNCC: 5 | RNVC: 2
25704-350000T177: RNCC: 5 | RNVC: 9
202004901: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-334-7243
Resilient Mount

123347243
17-1741-50: RNCC: 3 | RNVC: 2
17-1741-50 SHORE A: RNCC: 5 | RNVC: 2

13 Jun 1994

5340-12-148-9292
Webbing Strap

121489292
23176-262364.00.0: RNCC: 2 | RNVC: 2
23176-262364-00-0: RNCC: 3 | RNVC: 2
82300-23176-262364.00.0: RNCC: 3 | RNVC: 2
23176-262364.00.0: RNCC: 5 | RNVC: 9
23176-262364-00-0: RNCC: 5 | RNVC: 9
82300-B620X20-NBR-ST-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-320-7723
Mending Plate

123207723
2300232-205500.002.0: RNCC: 2 | RNVC: 2
2300232-205500.002.0: RNCC: 3 | RNVC: 2
9997023-205500.002.0: RNCC: 5 | RNVC: 2
2300232-205500.002.02: RNCC: 5 | RNVC: 9

15 Feb 1990

5340-12-701-1394
Mounting Plate

127011394
VG95211-ML-127011394: RNCC: 2 | RNVC: 2
5.12.0100.6650.86: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-2652
Pad Eye

121962652
03592000: RNCC: 3 | RNVC: 2

22 Jun 1983

5340-12-198-4354
Plug Button

121984354
3026830908: RNCC: 3 | RNVC: 2

27 Jan 1984

5340-12-177-0440
Dust And Moisture Seal Protective Plug

121770440
300V17: RNCC: 3 | RNVC: 2
GPN300V17: RNCC: 5 | RNVC: 2
GPN300,V17: RNCC: 5 | RNVC: 9
V17GPN300: RNCC: 5 | RNVC: 9
V17: RNCC: 5 | RNVC: 9
301001700: RNCC: 5 | RNVC: 9

9 Jan 1979

5340-12-193-8724
Angle Bracket

121938724
5548785: RNCC: 3 | RNVC: 2
554.8785: RNCC: 5 | RNVC: 2

8 Sep 1982

5340-12-199-2760
Bridge Clamp

121992760
114A80011: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-12-310-5320
Catch Strike

123105320
78203 46401: RNCC: 2 | RNVC: 2
7820346401: RNCC: 3 | RNVC: 2
78203 46401: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-323-7472
Electrical-Mechanical Equipment Post

123237472
66.3579.300.05-A001: RNCC: 3 | RNVC: 2

13 Dec 1990

5340-12-370-5079
Stativteil

123705079
7803201101AA: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-12-319-5418
Latch Bar

123195418
731.06.044: RNCC: 3 | RNVC: 2
V731.06.044: RNCC: 5 | RNVC: 2

11 Oct 1989

5340-12-323-7367
Lock-Release Lever

123237367
9000 4067: RNCC: 3 | RNVC: 2

12 Dec 1990

5340-12-158-3398
Angle Bracket

121583398
061250: RNCC: 3 | RNVC: 2
152-20445: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-363-8254
Retaining Bail

123638254
599.076.004.008: RNCC: 3 | RNVC: 2
81657400099: RNCC: 5 | RNVC: 2

28 Jul 2004

5340-12-337-2711
Lock-Release Lever

123372711
52.5001.006.00: RNCC: 3 | RNVC: 2

9 Feb 1995

5340-12-190-2113
Metal Runner

121902113
GE9101G482: RNCC: 3 | RNVC: 2
GE9101G482: RNCC: 5 | RNVC: 9

12 Nov 1981

5340-12-310-5288
Angle Bracket

123105288
78203 44502: RNCC: 2 | RNVC: 2
7820344502: RNCC: 3 | RNVC: 2
78203 44502: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-190-0451
Helical Compression Spring Retainer

121900451
5D19267: RNCC: 3 | RNVC: 2
5D19267: RNCC: 5 | RNVC: 2
5D19267: RNCC: 5 | RNVC: 2

4 Nov 1981

5340-12-130-6505

5340-12-339-4503
Mounting Plate

123394503
4220 306 068: RNCC: 3 | RNVC: 2
4220306068: RNCC: 5 | RNVC: 2

24 Nov 1995

5340-12-362-6898
Nonmetallic Bumper

123626898
S533M50X1003: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-318-3055
Angle Bracket

123183055
2016.0612: RNCC: 3 | RNVC: 2
70.213: RNCC: 5 | RNVC: 2

28 Jun 1989

5340-12-353-2153
Strap Hinge Leaf

123532153
01000033: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-307-0628
Angle Bracket

123070628
23176-390001.00.0: RNCC: 2 | RNVC: 2
23176-390001.00.0: RNCC: 3 | RNVC: 2

5 May 1986

5340-12-370-7037
Access Door Hinge

123707037
365/1611-37-04-00: RNCC: 3 | RNVC: 2
H03282: RNCC: 5 | RNVC: 2

12 Dec 2006

5340-12-369-6936
Snap Hook

123696936
212-K-1310-M-001002: RNCC: 3 | RNVC: 2

9 Aug 2006

5340-12-159-8174
Spring Tension Clip

121598174
A10-79-407-21-0: RNCC: 3 | RNVC: 2
A10-79-407-21-0: RNCC: 5 | RNVC: 9
85-801-2825: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-326-3327
Lock-Release Lever

123263327
2300232-180000.002.0: RNCC: 2 | RNVC: 2
2300232-180000.002.0: RNCC: 3 | RNVC: 2

2 Sep 1991

5340-12-348-0667
Mounting Plate

123480667
58R052-17175-1: RNCC: 2 | RNVC: 2
58R052-17175-1: RNCC: 3 | RNVC: 2

8 Apr 1999

5340-12-164-3267
Access Cover

121643267
12803-120000-12: RNCC: 2 | RNVC: 2
400012-120000-12: RNCC: 5 | RNVC: 2
12803-120000.12: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-387-6797
Support Hook

123876797
9999261-302200.003.0: RNCC: 3 | RNVC: 2

24 Jan 2012

5340-12-339-2345
Mounting Bracket

123392345
2300348-183031.000.0: RNCC: 2 | RNVC: 2
2300348-183031.000.0: RNCC: 3 | RNVC: 2
1591433: RNCC: 5 | RNVC: 2

27 Oct 1995

5340-12-308-3146
Metal Runner

123083146
41163-55600: RNCC: 3 | RNVC: 2
41163-556: RNCC: 5 | RNVC: 2
41163556: RNCC: 5 | RNVC: 2

25 Sep 1986

5340-12-367-6934
Mounting Plate

123676934
515012355: RNCC: 3 | RNVC: 2
5.15.012355: RNCC: 5 | RNVC: 2
515012355: RNCC: 5 | RNVC: 2

27 Sep 2005

5340-12-360-0906
Angle Bracket

123600906
2500262-830200.001.0: RNCC: 2 | RNVC: 2
2500262-830200.001.0: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-306-3995
Mending Plate

123063995
V22.917.29-0: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-184-1671
Butt Hinge Leaf

121841671
281831405: RNCC: 3 | RNVC: 2

1 Jul 1980

5340-12-185-8269
Expansion Shield

121858269
KD3: RNCC: 3 | RNVC: 2
80181: RNCC: 5 | RNVC: 2
2801811: RNCC: 5 | RNVC: 9

1 Nov 1980

5340-12-393-3028
Angle Bracket

123933028
S252M1040107: RNCC: 2 | RNVC: 2
S252M1040107: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-331-6358
Spring Tension Clip

123316358
028008: RNCC: 3 | RNVC: 2

2 Jun 1993

5340-12-313-6676
Access Cover

123136676
1079935: RNCC: 2 | RNVC: 2
1079935: RNCC: 3 | RNVC: 2

23 Apr 1988

5340-12-194-5634
Lock-Release Lever

121945634
2300174-972350: RNCC: 3 | RNVC: 2
2300174-972350: RNCC: 5 | RNVC: 9

15 Nov 1982

5340-12-162-9396

5340-12-309-4661
Dust And Moisture Seal Protective Plug

123094661
3819973386: RNCC: 3 | RNVC: 2

27 Jan 1987

5340-12-025-8693

5340-12-365-9296
Mounting Bracket

123659296
9424292968: RNCC: 3 | RNVC: 2

18 Feb 2005

5340-12-179-7033
Expansion Plug

121797033
81916010000: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-12-333-8934
Angle Bracket

123338934
51060: RNCC: 3 | RNVC: 2

22 Feb 1994

5340-12-318-5849
Nonmetallic Bumper

123185849
4355830084: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-12-371-9713
Mounting Bracket

123719713
S282M4014102: RNCC: 2 | RNVC: 2
S282M4014102: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-12-176-3628
Retaining Band

121763628
183201651: RNCC: 3 | RNVC: 2

27 Nov 1978

5340-12-345-4812
Helical Compression Spring Seat

123454812
4723433802: RNCC: 3 | RNVC: 2
472.343.38.02: RNCC: 5 | RNVC: 2

24 Mar 1998

5340-12-318-9941
Detent Plunger

123189941
136143: RNCC: 3 | RNVC: 2
136143: RNCC: 5 | RNVC: 2
136143: RNCC: 5 | RNVC: 9

30 Aug 1989

5340-12-094-0965

5340-12-360-0024
Mounting Bracket

123600024
9414299540: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-180-4514
Angle Bracket

121804514
4252900233: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-344-0627
Resilient Mount

123440627
1241 1793: RNCC: 3 | RNVC: 2
12411793ED0920-47: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-353-7637
Spring Tension Clip

123537637
201193: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-365-0698
Angle Bracket

123650698
4616931012: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-343-9309
Mounting Plate

123439309
3512 120 01471: RNCC: 3 | RNVC: 2
35121200147: RNCC: 5 | RNVC: 2

14 Aug 1997

5340-12-369-5601
Webbing Strap

123695601
215363 2001: RNCC: 3 | RNVC: 2

25 Jul 2006

5340-12-364-8591
Nonmetallic Bumper

123648591
PQ3.83: RNCC: 3 | RNVC: 9
4373250044: RNCC: 5 | RNVC: 2

9 Nov 2004

5340-12-309-3370
Flush Lock

123093370
251843604B: RNCC: 3 | RNVC: 9

15 Jan 1987

5340-12-360-0047
Mounting Bracket

123600047
9414752040: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-317-1809
Double Angle Bracket

123171809
4606470614: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-317-3486
Mounting Bracket

123173486
136M25057: RNCC: 3 | RNVC: 2

30 Mar 1989

5340-12-388-3365
Buckle

123883365
P20712: RNCC: 3 | RNVC: 2

13 Mar 2012

5340-12-388-0681
Dust And Moisture Seal Protective Cover

123880681
0626-266: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-12-134-6739

5340-12-128-0866

5340-12-300-2708
Mending Plate

123002708
A11A121408261: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-300-4513
Mending Plate

123004513
07663: RNCC: 3 | RNVC: 2
07663: RNCC: 5 | RNVC: 9
07663: RNCC: 5 | RNVC: 9

2 Aug 1984

5340-12-197-6087
Angle Bracket

121976087
53.3031.065.00: RNCC: 3 | RNVC: 2
53.3031.065.00: RNCC: 5 | RNVC: 9

7 Nov 1983

5340-12-349-5873
Angle Bracket

123495873
81626800094: RNCC: 3 | RNVC: 2
81.62680.0094: RNCC: 5 | RNVC: 2

7 Dec 1999

5340-12-360-2107
Mounting Bracket

123602107
81626305090: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-364-4788
Snap-In Plain Standoff

123644788
2654-351100.01: RNCC: 2 | RNVC: 2
2654-351100.01: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-701-5308
Mounting Bracket

127015308
VG95211-ML-127015308: RNCC: 2 | RNVC: 2
5.12.6105.1070.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-351-2166
Access Cover

123512166
3099-00-111000.11: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-155-4614
Spring Tension Clip

121554614
160-74657-03: RNCC: 3 | RNVC: 2
160-74657-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-3709
Loop Clamp

123153709
SP4449.059/15SZ: RNCC: 3 | RNVC: 2
01414449059: RNCC: 5 | RNVC: 2
1414449059: RNCC: 5 | RNVC: 2
068129641: RNCC: 5 | RNVC: 2
068 129 641: RNCC: 5 | RNVC: 2
068 129 641: RNCC: 5 | RNVC: 2
068 129 641: RNCC: 5 | RNVC: 2

18 Oct 1988

5340-12-381-2943
Mounting Plate

123812943
424-04-K4-2: RNCC: 3 | RNVC: 2
4250473100417: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-302-6337
Angle Bracket

123026337
1-2650-17-4: RNCC: 2 | RNVC: 2
1-2650-17-4: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-351-3848
Nonmetallic Bumper

123513848
10063-561000.05: RNCC: 3 | RNVC: 2
10063-561000.05: RNCC: 5 | RNVC: 9

20 Jul 2000

5340-12-172-7206
Angle Bracket

121727206
4030980139: RNCC: 3 | RNVC: 2

14 Feb 1978

5340-12-313-4607
Nonmetallic Solid Wheel

123134607
2300013-5532.05: RNCC: 2 | RNVC: 2
2300013-5532.05: RNCC: 3 | RNVC: 2
2300013-5532.05: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-316-1549
Mounting Bracket

123161549
4031420212: RNCC: 3 | RNVC: 2
15010138: RNCC: 5 | RNVC: 2

24 Dec 1988

5340-12-188-9238
Dust And Moisture Seal Protective Plug

121889238
500B64: RNCC: 3 | RNVC: 2
GPN500B64: RNCC: 5 | RNVC: 2
500006400: RNCC: 5 | RNVC: 9
B64GPN500: RNCC: 5 | RNVC: 9
GPN500,B64: RNCC: 5 | RNVC: 9
B64: RNCC: 5 | RNVC: 9

10 Aug 1981

5340-12-333-5830
Screw Thread Insert And Tool Assortment

123335830
0185 1080 012: RNCC: 3 | RNVC: 2
C 5791 310 B: RNCC: 5 | RNVC: 2
C 5791 310 B: RNCC: 5 | RNVC: 2
01851080012: RNCC: 5 | RNVC: 2
C5791310B: RNCC: 5 | RNVC: 9

7 Jan 1994

5340-12-300-9407
Mending Plate

123009407
1423-351.22(4): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-042-4165

5340-12-355-9916
Elastic Strap

123559916
9193.968.9: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-12-196-5561
Angle Bracket

121965561
2300039-267015.002.0: RNCC: 2 | RNVC: 2
2300039-267015.002.0: RNCC: 3 | RNVC: 2
2300039-267015-002-0: RNCC: 5 | RNVC: 9

18 Jul 1983

5340-12-386-1438
Access Cover

123861438
2500261-182405.000.0: RNCC: 2 | RNVC: 2
2500261-182405.000.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-393-7410
Helical Compression Spring Retainer

123937410
H1.1784-47-01-10.00-03: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-12-330-4393
Access Door

123304393
C22234-A1200-C21: RNCC: 3 | RNVC: 2

15 Dec 1992

5340-12-189-7680
Handwheel

121897680
VG85082-A-63X7: RNCC: 2 | RNVC: 2
VG85082-A-63X7: RNCC: 3 | RNVC: 2
VG85082-A-63X7: RNCC: 3 | RNVC: 2
VG85082-A-63X7: RNCC: 3 | RNVC: 9
A63X7VG85082GCUSN5ZNPB: RNCC: 5 | RNVC: 2
A63X7VG85082-RG5: RNCC: 5 | RNVC: 2
A63X7VG85082: RNCC: 5 | RNVC: 2
A63X7VG85082RG5: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-12-702-4500
Mounting Bracket

127024500
VG95211-ML-127024500: RNCC: 2 | RNVC: 2
5.51.0602.1192.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-390-0493
Angle Bracket

123900493
313435: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-337-4786
Lock-Release Lever

123374786
463-630301.000: RNCC: 3 | RNVC: 9
9898071: RNCC: 5 | RNVC: 9

9 Mar 1995

5340-12-354-4861
Manual Control Lever

123544861
189141901: RNCC: 3 | RNVC: 2

18 Jul 2001

5340-12-328-6738
Resilient Mount

123286738
701407077: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-333-5151
Dust And Moisture Seal Boot

123335151
1103260259: RNCC: 3 | RNVC: 2

28 Dec 1993

5340-12-182-6790
Dust And Moisture Seal Protective Cap

121826790
2313001: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-12-182-7355
Key Blank

121827355
658: RNCC: 3 | RNVC: 2

22 Feb 1980

5340-12-379-1378
Mounting Bracket

123791378
0025474: RNCC: 3 | RNVC: 2

25 Jun 2009

5340-12-323-1282
Mounting Bracket

123231282
100227-96210.01: RNCC: 2 | RNVC: 2
100227-96210.01: RNCC: 3 | RNVC: 2

25 Oct 1990

5340-12-377-2134
Angle Bracket

123772134
42073155: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-12-348-9219
Mounting Plate

123489219
832A23001: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-12-344-1896
Angle Bracket

123441896
2300387-250050.002: RNCC: 2 | RNVC: 2
2300387-250050.002: RNCC: 3 | RNVC: 2
2300387-250050.002: RNCC: 5 | RNVC: 9
9907870: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-12-377-2642
Mounting Bracket

123772642
41223351: RNCC: 3 | RNVC: 2

22 Dec 2008

5340-12-181-1038

5340-12-337-9754
Access Cover

123379754
839.5546.00: RNCC: 3 | RNVC: 2

8 May 1995

5340-12-311-3761
Mending Plate

123113761
2300227-321810.000: RNCC: 2 | RNVC: 2
2300227-321810.000: RNCC: 3 | RNVC: 2
2300227-321810.000: RNCC: 5 | RNVC: 9

25 Aug 1987

5340-12-042-5544

5340-12-360-0087
Mounting Bracket

123600087
9425421040: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-360-0452
Butt Hinge

123600452
9416600551: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-347-0493
Spacing Threaded Standoff

123470493
02022: RNCC: 3 | RNVC: 2
10978: RNCC: 5 | RNVC: 2

15 Oct 1998

5340-12-343-2474
Loop Clamp

123432474
N90561801: RNCC: 3 | RNVC: 2

22 May 1997

5340-12-387-1673
Dust And Moisture Seal Protective Plug

123871673
0811283: RNCC: 3 | RNVC: 2

11 Nov 2011

5340-12-324-4159
Headless Straight Rod

123244159
450.02.0002: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-12-307-2461
Double Angle Bracket

123072461
RP988643: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-320-8401
Nonmetallic Bumper

123208401
35407873: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-12-325-1845
Clamp Bolt Assembly

123251845
407A-M12X80: RNCC: 3 | RNVC: 2

14 May 1991

5340-12-317-5339
Mounting Bracket

123175339
320-992113: RNCC: 3 | RNVC: 2

17 Apr 1989

5340-12-362-8715
Strap Hinge

123628715
S537M3004210: RNCC: 3 | RNVC: 2

8 Apr 2004

5340-12-387-7347
Permanent Magnet

123877347
SENSORPLAETTCHEN M6: RNCC: 3 | RNVC: 2

27 Jan 2012

5340-12-365-8844
Retaining Strap

123658844
537237-0078.000: RNCC: 3 | RNVC: 2

16 Feb 2005

5340-12-311-4608
Buckle

123114608
AFG008746: RNCC: 3 | RNVC: 2
AFG008746: RNCC: 3 | RNVC: 2
DFVLR40-091-15: RNCC: 5 | RNVC: 2

4 Sep 1987

5340-12-384-8730
Caster Wheel

123848730
F1.1189-30-10-10.00-31: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-12-328-9273
Loop Clamp

123289273
2300354-889900-006: RNCC: 2 | RNVC: 2
70700-400066-99: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-328-6264
Mounting Bracket

123286264
44-39489: RNCC: 3 | RNVC: 2
526739: RNCC: 5 | RNVC: 2

10 Jun 1992

5340-12-183-0607
Nonmetallic Bumper

121830607
54203002-00: RNCC: 3 | RNVC: 2

15 Mar 1980

5340-12-344-8736
Loop Clamp

123448736
DIN3015-LG-3R-19-PP-W1: RNCC: 2 | RNVC: 2
319PP-DP-AS: RNCC: 3 | RNVC: 2
319PP.DP.AS: RNCC: 5 | RNVC: 2
319PP.DP.AS: RNCC: 5 | RNVC: 9

5 Jan 1998

5340-12-363-5035
Cushioning Pad

123635035
J0423728H521-000A0-011: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-191-5157
Dust And Moisture Seal Protective Cap

121915157
037206: RNCC: 3 | RNVC: 2
1-545-8-4: RNCC: 5 | RNVC: 2

8 Feb 1982

5340-12-176-4030
Retaining Strap

121764030
LN29836B20: RNCC: 2 | RNVC: 2

27 Nov 1978

5340-12-355-1100
Helical Compression Spring Retainer

123551100
4B51045: RNCC: 3 | RNVC: 2

9 Oct 2001

5340-12-334-9887
Webbing Strap

123349887
11720680: RNCC: 3 | RNVC: 2

8 Jul 1994

5340-12-353-3407
Support Hook

123533407
209345: RNCC: 3 | RNVC: 2

12 Mar 2001

5340-12-348-6171
Spacing Threaded Standoff

123486171
31990613: RNCC: 3 | RNVC: 2

27 Jul 1999

5340-12-319-6226
Angle Bracket

123196226
503719: RNCC: 3 | RNVC: 2

19 Oct 1989

5340-12-148-6143

5340-12-342-4318
Lock-Release Lever

123424318
6600153-982120.005.0: RNCC: 2 | RNVC: 2
6600153-982120.005.0: RNCC: 3 | RNVC: 2

11 Feb 1997

5340-12-347-1261
Dust And Moisture Seal Protective Cap

123471261
290/055: RNCC: 3 | RNVC: 2
GPN290-055: RNCC: 5 | RNVC: 2
290-055: RNCC: 5 | RNVC: 9

29 Oct 1998

5340-12-302-0962
Butt Hinge Leaf

123020962
2300164-291110.000: RNCC: 3 | RNVC: 2
2300164-291110.000: RNCC: 5 | RNVC: 9
2300164-291110-000: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-12-701-7171
Angle Bracket

127017171
VG95211-ML-127017171: RNCC: 2 | RNVC: 2
5.12.7601.8160.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-149-3042
Resilient Mount

121493042
DIN95363-D20X20-M5X20-NR40ST: RNCC: 4 | RNVC: 1
505006-M5X20.NR40.ST: RNCC: 5 | RNVC: 2
VG95363-D20X20-M5X20-NR40ST: RNCC: 5 | RNVC: 9
BE4-20-24N: RNCC: 5 | RNVC: 9
N1086-6-280: RNCC: 5 | RNVC: 9
N1086-6-80: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-377-6025
Mounting Bracket

123776025
2500308-187025.000.0: RNCC: 3 | RNVC: 2

28 Jan 2009

5340-12-373-9289
Loop Clamp

123739289
JN0529-20: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-12-701-6640
Blank Panel

127016640
VG95211-ML-127016640: RNCC: 2 | RNVC: 2
5.12.7210.2011.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-355-4562
Lock-Release Lever

123554562
1667300: RNCC: 3 | RNVC: 2
4.500.01-2001-0109: RNCC: 5 | RNVC: 2

16 Nov 2001

5340-12-393-6528
Mounting Bracket

123936528
4100098-982710.007.0: RNCC: 2 | RNVC: 2
4100098-982710.007.0: RNCC: 3 | RNVC: 2

30 Sep 2013

5340-12-358-8606
Angle Bracket

123588606
2500262-390000.006.0: RNCC: 2 | RNVC: 2
2500262-390000.006.0: RNCC: 3 | RNVC: 2

22 Nov 2002

5340-12-326-7807
Nonmetallic Bumper

123267807
5.031.007.0: RNCC: 3 | RNVC: 2

24 Oct 1991

5340-12-328-9613
Electrical-Mechanical Equipment Post

123289613
5.17.454: RNCC: 3 | RNVC: 2
18H3610: RNCC: 5 | RNVC: 2
536.50-90.09: RNCC: 5 | RNVC: 2

3 Jul 1992

5340-12-365-3324
Pad Eye

123653324
1837-190000.072.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-310-2127
Headless Straight Rod

123102127
2360-265010.00.0: RNCC: 2 | RNVC: 2
2360-265010.00.0: RNCC: 3 | RNVC: 2
2360-265010.00.0: RNCC: 5 | RNVC: 2

22 Apr 1987

5340-12-358-1767
Mounting Bracket

123581767
12.91.66: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-12-338-6959
Handle Grip

123386959
1216981: RNCC: 3 | RNVC: 2
1216981: RNCC: 5 | RNVC: 2

16 Aug 1995

5340-12-322-8808
Nonmetallic Bumper

123228808
262300977: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-12-375-6783
Spring Tension Clip

123756783
6420180540: RNCC: 3 | RNVC: 2
A6420180540: RNCC: 5 | RNVC: 9

24 Jun 2008

5340-12-192-3027
Helical Compression Spring Seat

121923027
4603170035: RNCC: 3 | RNVC: 2
7005-93: RNCC: 5 | RNVC: 2
9407005930: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-180-4975
Dust And Moisture Seal Protective Plug

121804975
4069975137: RNCC: 3 | RNVC: 2

14 Sep 1979

5340-12-040-4295

5340-12-050-2961

5340-12-378-1911
Swivel Caster

123781911
663.06.920: RNCC: 3 | RNVC: 2

18 Mar 2009

5340-12-355-3799
Extension Drawer Slide

123553799
079427: RNCC: 3 | RNVC: 2

8 Nov 2001

5340-12-342-4408
Angle Bracket

123424408
43127130577: RNCC: 3 | RNVC: 9
4312 713 0577: RNCC: 5 | RNVC: 9

12 Feb 1997

5340-12-183-1184
Pipe Hanger Extension Bar

121831184
0287 7525: RNCC: 3 | RNVC: 2
2877525: RNCC: 5 | RNVC: 2
2877525EE0693-79: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-197-3859
Nonmetallic Bumper

121973859
3263310044: RNCC: 3 | RNVC: 2
837.3263310044.DBL5558.20: RNCC: 5 | RNVC: 2

18 Oct 1983

5340-12-366-6618
Mounting Plate

123666618
15003074: RNCC: 3 | RNVC: 2

20 May 2005

5340-12-329-2374
Mounting Bracket

123292374
2257: RNCC: 3 | RNVC: 2

25 Jul 1992

5340-12-391-7129
Mounting Bracket

123917129
I006071: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-12-041-0862

5340-12-042-2511

5340-12-700-2406
Helical Compression Spring Seat

127002406
51-270481064: RNCC: 2 | RNVC: 2
765-65-365: RNCC: 3 | RNVC: 2

15 Nov 1991

5340-12-311-9176
Expansion Plug

123119176
DIN443-A16-ST-PHR: RNCC: 2 | RNVC: 2
000443016000: RNCC: 5 | RNVC: 2
A16DIN443DBL8400: RNCC: 5 | RNVC: 2
000443 016000: RNCC: 5 | RNVC: 9

29 Oct 1987

5340-12-335-2515
Butt Hinge Leaf

123352515
2300002-181230.001: RNCC: 2 | RNVC: 2
2300002-181230.001: RNCC: 3 | RNVC: 2
1073361: RNCC: 5 | RNVC: 2
1073361: RNCC: 5 | RNVC: 9
2300002-181230.001: RNCC: 5 | RNVC: 9

1 Aug 1994

5340-12-140-9085
Nonmetallic Bumper

121409085
2510-0006: RNCC: 3 | RNVC: 2
31475: RNCC: 5 | RNVC: 2
33103: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-6408
Retaining Band

127026408
VG95211-ML-127026408: RNCC: 2 | RNVC: 2
84.7702.5102: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-391-5230
Mounting Plate

123915230
I001663TAN686A: RNCC: 3 | RNVC: 2

18 Mar 2013

5340-12-134-0363
Retaining Strap

121340363
0951002000: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-150-6494

5340-12-022-0598

5340-12-149-1032
Retaining Strap

121491032
121L03007: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-313-7221
Loop Clamp

123137221
125.600.310: RNCC: 3 | RNVC: 2

28 Apr 1988

5340-12-343-1271
Hand Crank

123431271
BHAA020: RNCC: 3 | RNVC: 2

6 May 1997

5340-12-322-2543
Lock-Release Lever

123222543
54.2731.207.06: RNCC: 2 | RNVC: 2
54.2731.207.06: RNCC: 3 | RNVC: 2

6 Aug 1990

5340-12-326-5869
Mounting Bracket

123265869
272.376.013: RNCC: 3 | RNVC: 2
272.376 013: RNCC: 5 | RNVC: 9

10 Oct 1991

5340-12-196-6283
Loop Clamp

121966283
3460180540: RNCC: 3 | RNVC: 2

25 Jul 1983

5340-12-348-7716
Dust And Moisture Seal Protective Plug

123487716
805X(SIZEDN100): RNCC: 3 | RNVC: 2

17 Aug 1999

5340-12-366-2959
Mounting Plate

123662959
104178: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-044-4734

5340-12-314-0413
Retaining Band

123140413
6204300240: RNCC: 3 | RNVC: 2
620 430 02 40: RNCC: 5 | RNVC: 2

1 Jun 1988

5340-12-127-8887
Expansion Plug

121278887
B30N59A: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-382-6904
Catch Strike

123826904
11561S: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-12-354-0577
Spring Tension Clip

123540577
525175254: RNCC: 3 | RNVC: 2
52 517 5254: RNCC: 5 | RNVC: 2

30 May 2001

5340-12-357-9707
Snap Hook

123579707
AJ520: RNCC: 3 | RNVC: 2

22 Aug 2002

5340-12-346-4844
Spacing Threaded Standoff

123464844
111A01018: RNCC: 3 | RNVC: 2

30 Jul 1998

5340-12-365-2307
Access Cover

123652307
2500255-740800.001.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-382-0214
Rigid Caster

123820214
5200.111.730.000: RNCC: 3 | RNVC: 2

28 Apr 2010

5340-12-701-8427
Loop Clamp

127018427
VG95211-ML-127018427: RNCC: 2 | RNVC: 2
5148A-60: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-159-1371
Retaining Strap

121591371
RIG08-206: RNCC: 3 | RNVC: 2
RIG08-206: RNCC: 5 | RNVC: 2
RIG08-206: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-392-5731
Sliding Door Hanger

123925731
6000062-194150.000.0: RNCC: 3 | RNVC: 2

19 Jun 2013

5340-12-389-1756
Angle Bracket

123891756
9999261-186140.005.0: RNCC: 3 | RNVC: 2

31 May 2012

5340-12-382-6028
Pipe Hanger

123826028
NORMAFIX K 1 181-207: RNCC: 3 | RNVC: 2
181-207: RNCC: 5 | RNVC: 9

15 Jul 2010

5340-12-158-5002
Compression Cup

121585002
T360-1 360X270X25/5-84NBR/772: RNCC: 3 | RNVC: 2
T360-1-84NBR772: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-3332
Nut And Bolt Locking Plate

121963332
P-855937-403: RNCC: 3 | RNVC: 2
P855937-403: RNCC: 5 | RNVC: 2

28 Jun 1983

5340-12-332-8626
Multiple Angle Bracket

123328626
6100146-901007.000.0: RNCC: 2 | RNVC: 2
6100146-901007.000.0: RNCC: 3 | RNVC: 2

28 Sep 1993

5340-12-339-0685
Expansion Shield

123390685
62315: RNCC: 3 | RNVC: 2
HM 6X52S: RNCC: 5 | RNVC: 2
62315: RNCC: 5 | RNVC: 2

5 Oct 1995

5340-12-377-6308
Door Holder

123776308
1-13615B-14: RNCC: 3 | RNVC: 2

29 Jan 2009

5340-12-368-6253
Dust And Moisture Seal Protective Cap

123686253
704.602.7: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-12-192-3935
Loop Clamp

121923935
PAN4231HGC5927: RNCC: 3 | RNVC: 2

20 Apr 1982

5340-12-332-2583
Plain Solid Disk

123322583
2410030025: RNCC: 3 | RNVC: 2

27 Jul 1993

5340-12-348-2872
Mounting Bracket

123482872
874 400 44: RNCC: 3 | RNVC: 2

25 May 1999

5340-12-384-4252
Mounting Plate

123844252
H50086: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-12-333-8932
Spacing Threaded Standoff

123338932
52.9352.101.87: RNCC: 3 | RNVC: 2

22 Feb 1994

5340-12-392-2752
Retaining Band

123922752
4254700340: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-196-9893
Mending Plate

121969893
4358107011: RNCC: 3 | RNVC: 2

7 Sep 1983

5340-12-022-8410

5340-12-305-5310
Butt Hinge Leaf

123055310
LN9172AF60: RNCC: 2 | RNVC: 2
LN9172A15X60: RNCC: 5 | RNVC: 2
A15X60LN9172: RNCC: 5 | RNVC: 2

19 Nov 1985

5340-12-368-4608
Helical Compression Spring Seat

123684608
M662104: RNCC: 3 | RNVC: 9

14 Mar 2006

5340-12-358-1161
Flush Lock

123581161
85626806008: RNCC: 3 | RNVC: 2

16 Sep 2002

5340-12-343-8600
Mounting Bracket

123438600
E28183: RNCC: 3 | RNVC: 2
E28183: RNCC: 5 | RNVC: 2

6 Aug 1997

5340-12-175-7928
Dust And Moisture Seal Protective Plug

121757928
049115627A: RNCC: 3 | RNVC: 2

18 Oct 1978

5340-12-364-8231
Mounting Plate

123648231
0008203111: RNCC: 3 | RNVC: 2

4 Nov 2004

5340-12-191-1109
Angle Bracket

121911109
80002223: RNCC: 3 | RNVC: 2
80002223EC5021-57: RNCC: 5 | RNVC: 2

13 Jan 1982

5340-12-309-8307
Nonmetallic Bumper

123098307
VG95092B40X30X6NR65: RNCC: 2 | RNVC: 2
82200-B40X30X6X10.NR65: RNCC: 3 | RNVC: 2
3229870239: RNCC: 3 | RNVC: 2
005525037: RNCC: 5 | RNVC: 2
00 5525 037: RNCC: 5 | RNVC: 2
4700058: RNCC: 5 | RNVC: 2
B40X30X6X10.65NR: RNCC: 5 | RNVC: 2

6 Mar 1987

5340-12-392-7537
Snap Hook

123927537
09-001-000: RNCC: 3 | RNVC: 2

4 Jul 2013

5340-12-315-8948
Nonmetallic Bumper

123158948
PV-50-22: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-12-305-0468
Electrical-Mechanical Equipment Post

123050468
VG95148C10XM5X35-ST: RNCC: 2 | RNVC: 2
VG95148C10XM5X35-ST: RNCC: 3 | RNVC: 2

20 Sep 1985

5340-12-356-6815
Access Cover

123566815
3D4-VV128-00: RNCC: 3 | RNVC: 2

22 Mar 2002

5340-12-188-7376
Access Cover

121887376
54.0028.170.00: RNCC: 3 | RNVC: 2
54-0028-170-00: RNCC: 5 | RNVC: 2

28 Jul 1981

5340-12-328-9398
Metal Grille

123289398
1120-63311.08: RNCC: 2 | RNVC: 2
1120-63311.08: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-394-0520
Manual Control Lever

123940520
1083958: RNCC: 3 | RNVC: 2

31 Oct 2013

5340-12-130-2955

5340-12-378-0379
Pipe Hanger

123780379
41027172: RNCC: 3 | RNVC: 2

9 Mar 2009

5340-12-337-8871
Plain Solid Disk

123378871
4495001: RNCC: 3 | RNVC: 2
EZ44950: RNCC: 5 | RNVC: 9

27 Apr 1995

5340-12-301-5808
Angle Bracket

123015808
4178670: RNCC: 3 | RNVC: 2

25 Oct 1984

5340-12-304-8811
Manual Control Handle

123048811
GN500-63-M8-SW: RNCC: 3 | RNVC: 2
63XM8 GN500 SCHWARZ ROSTFREI: RNCC: 5 | RNVC: 2
GN500.2/63/M8-SW: RNCC: 5 | RNVC: 2
614-088: RNCC: 5 | RNVC: 2

30 Aug 1985

5340-12-357-4923
Mounting Bracket

123574923
A-087118-013: RNCC: 3 | RNVC: 2
A087118-013: RNCC: 5 | RNVC: 2

26 Jun 2002

5340-12-366-7491
Loop Clamp

123667491
040-0130-524-020: RNCC: 3 | RNVC: 2
5001865006: RNCC: 5 | RNVC: 2

2 Jun 2005

5340-12-322-2463
Mounting Bracket

123222463
2382-181003.00.0: RNCC: 2 | RNVC: 2
2382-181003.00.0: RNCC: 3 | RNVC: 2
2382-181003.00.0: RNCC: 5 | RNVC: 2

3 Aug 1990

5340-12-351-3143
Shimmy Damper

123513143
46512310218: RNCC: 3 | RNVC: 9

12 Jul 2000

5340-12-316-5975
Helical Compression Spring Retainer

123165975
5186415: RNCC: 3 | RNVC: 2

27 Jan 1989

5340-12-352-7370
Access Cover

123527370
13842101: RNCC: 3 | RNVC: 2

11 Dec 2000

5340-12-146-0413
Plain Solid Disk

121460413
6155495: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-301-0995
Metal Runner

123010995
54.0028.176.02: RNCC: 3 | RNVC: 2

21 Sep 1984

5340-12-005-1105

5340-12-308-0693
Detent Plunger

123080693
2602-80.03: RNCC: 3 | RNVC: 2

28 Aug 1986

5340-12-316-2950
Rod End Connector

123162950
5186303: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-360-4216
Electronic Equipment Hardware Kit

123604216
E132874: RNCC: 3 | RNVC: 2

20 May 2003

5340-12-367-9589
Rim Lock

123679589
101304: RNCC: 3 | RNVC: 2
GSV 928F: RNCC: 5 | RNVC: 2

10 Nov 2005

5340-12-314-5446
Mending Plate

123145446
4354269340: RNCC: 3 | RNVC: 2
435 426 93 40: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-152-0315
Double Angle Bracket

121520315
535H22003E1: RNCC: 3 | RNVC: 2
535H22003: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-352-5705
Snap Hook

123525705
587750: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-135-6815

5340-12-091-7867

5340-12-373-7543
Flush Lock

123737543
0007203635: RNCC: 3 | RNVC: 2

5 Dec 2007

5340-12-327-4592
Access Cover

123274592
11226642200: RNCC: 3 | RNVC: 2

23 Jan 1992

5340-12-372-8089
Horizontal Sliding Door Hanger And Track Set

123728089
030296: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-12-326-9410
Mounting Plate

123269410
4414720: RNCC: 3 | RNVC: 2
3473009: RNCC: 5 | RNVC: 9

12 Nov 1991

5340-12-387-9297
Butt Hinge

123879297
7094109: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-193-3091
Escutcheon Plate

121933091
1156890097: RNCC: 3 | RNVC: 2

12 Jul 1982

5340-12-701-6590
Mounting Plate

127016590
VG95211-ML-127016590: RNCC: 2 | RNVC: 2
5.12.7209.8005.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-318-7313
Double Angle Bracket

123187313
704-122000-958-0: RNCC: 3 | RNVC: 2

11 Aug 1989

5340-12-319-3788
Retaining Strap

123193788
1044230 VERZINKT: RNCC: 3 | RNVC: 2
1044230 A3C: RNCC: 5 | RNVC: 2
B14SN78550-ST VZK: RNCC: 5 | RNVC: 2
H78550-B140-S3: RNCC: 5 | RNVC: 2
SN78550-B14-ST-A3G-F: RNCC: 5 | RNVC: 2

27 Sep 1989

5340-12-322-8801
Bow Handle

123228801
704-145120-901-0: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-12-301-2023
Double Angle Bracket

123012023
A-295140-004: RNCC: 3 | RNVC: 2
A295140-004: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-354-6670
Metallic Solid Wheel

123546670
P-876167-003: RNCC: 3 | RNVC: 2
P876167-003: RNCC: 5 | RNVC: 2

14 Aug 2001

5340-12-344-3846
Mounting Bracket

123443846
A-245468-001: RNCC: 3 | RNVC: 2
A245468-001: RNCC: 5 | RNVC: 2

22 Oct 1997

5340-12-137-7798
Padlock

121377798
DIN7465-C75R-MS-ST-6031F9: RNCC: 2 | RNVC: 2
TL5340-0005-7: RNCC: 2 | RNVC: 2
C75RDIN7465MSST6014: RNCC: 5 | RNVC: 2
DIN7465-C75R-MS-ST-6014: RNCC: 5 | RNVC: 2
C75RDIN7465-MS-ST-6014: RNCC: 5 | RNVC: 2
DIN7465-D3-75-LQ6014-MS-ST: RNCC: 5 | RNVC: 9
DIN7465-D3-75-LQ6031F9-MS-ST: RNCC: 5 | RNVC: 9
5340-0005-7: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-9794
Mounting Bracket

123159794
P-M29861-006: RNCC: 3 | RNVC: 2
PM29861-006: RNCC: 5 | RNVC: 2

10 Dec 1988

5340-12-701-6076
Mounting Plate

127016076
VG95211-ML-127016076: RNCC: 2 | RNVC: 2
5.12.7003.1090.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-375-8826
Runner

123758826
21.7381-01-55-01.00-27: RNCC: 3 | RNVC: 2
G27281: RNCC: 5 | RNVC: 2

16 Jul 2008

5340-12-152-1371
Helical Compression Spring Retainer

121521371
1243-110-06: RNCC: 3 | RNVC: 2
1243-110-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-152-1767
Compression Cup

121521767
000000-0061.995: RNCC: 3 | RNVC: 2
BFA25-20-15: RNCC: 3 | RNVC: 2
000000-0061.995: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-334-9207
Metallic Bumper

123349207
4900347-200500.07: RNCC: 2 | RNVC: 2
4900347-200500.07: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-12-196-5725
Resilient Mount

121965725
3-602-9-085-028-7: RNCC: 3 | RNVC: 2
3-602-9-085-028-7: RNCC: 5 | RNVC: 9
3.602.9.085.028.7: RNCC: 5 | RNVC: 9

19 Jul 1983

5340-12-316-1197
Mending Plate

123161197
PM-41913-018: RNCC: 3 | RNVC: 2
P-M41913-018: RNCC: 5 | RNVC: 2
PM41913-018: RNCC: 5 | RNVC: 2

23 Dec 1988

5340-12-319-7075
Door Button

123197075
1229-210.27: RNCC: 2 | RNVC: 2
533221-0267.000: RNCC: 3 | RNVC: 2
533221-0267.000: RNCC: 5 | RNVC: 9

27 Oct 1989

5340-12-312-6705
Loop Clamp

123126705
DIN3015-LA-L-2R-16-PP-W1: RNCC: 2 | RNVC: 2
HRL2AV16PP STMBL: RNCC: 3 | RNVC: 2
SPV216-PP-DP-AS: RNCC: 3 | RNVC: 2
RAPR6-216: RNCC: 3 | RNVC: 2
SPV216PP-DP-AS: RNCC: 5 | RNVC: 2
RAPR6-216: RNCC: 5 | RNVC: 2
DIN3015-LA2R-16PP-W1-L: RNCC: 5 | RNVC: 2
SPV216-PP-DP-AS: RNCC: 5 | RNVC: 2

26 Jan 1988

5340-12-379-1850
Bumper

123791850
300411: RNCC: 3 | RNVC: 2

1 Jul 2009

5340-12-384-3970
Nut And Bolt Head Protective Cap

123843970
10010810000: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-12-322-6378
Bow Handle

123226378
9230266: RNCC: 3 | RNVC: 2
923 026 6: RNCC: 5 | RNVC: 2
9230263: RNCC: 5 | RNVC: 2
923 026 3: RNCC: 5 | RNVC: 2

7 Sep 1990

5340-12-307-0799
Bridge Clamp

123070799
151-410000-908-0: RNCC: 3 | RNVC: 2

6 May 1986

5340-12-318-7081
Butt Hinge

123187081
4-175902: RNCC: 3 | RNVC: 2
57066: RNCC: 5 | RNVC: 2

9 Aug 1989

5340-12-333-4168
Runner

123334168
23027: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-351-1037
Pad Eye

123511037
0070-100822A00C: RNCC: 3 | RNVC: 2

26 Jun 2000

5340-12-343-1846
Angle Bracket

123431846
1222-137: RNCC: 3 | RNVC: 2

14 May 1997

5340-12-199-5268
Retaining Band

121995268
4604750221: RNCC: 3 | RNVC: 2
9450700044: RNCC: 5 | RNVC: 2
1538-24: RNCC: 5 | RNVC: 2
S7211490271: RNCC: 5 | RNVC: 9

8 May 1984

5340-12-183-9050
Retaining Strap

121839050
2200236: RNCC: 3 | RNVC: 9

29 May 1980

5340-12-361-0009
Mounting Bracket

123610009
6645.902: RNCC: 3 | RNVC: 2
4375800244: RNCC: 5 | RNVC: 2

6 Aug 2003

5340-12-361-1990
Mounting Bracket

123611990
7861011410: RNCC: 2 | RNVC: 2
7861011410: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-12-370-3177
Angle Bracket

123703177
1216 4732: RNCC: 3 | RNVC: 2

25 Oct 2006

5340-12-368-9284
Angle Bracket

123689284
0080987: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-337-2271
Schlingen- Klemme

5340-12-185-7615
Dust And Moisture Seal Protective Cap

121857615
511504077: RNCC: 3 | RNVC: 2
636090208501: RNCC: 3 | RNVC: 2
511504008: RNCC: 5 | RNVC: 2
0558571: RNCC: 5 | RNVC: 2
636090208066: RNCC: 5 | RNVC: 2

30 Oct 1980

5340-12-157-7757
Nonmetallic Bumper

121577757
G1104333: RNCC: 3 | RNVC: 2
1104333: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-179-7359
Angle Bracket

121797359
4256401777: RNCC: 3 | RNVC: 2

25 Jul 1979

5340-12-158-6837

5340-12-340-5445
Loop Clamp

123405445
191253139Q: RNCC: 3 | RNVC: 2

30 Apr 1996

5340-12-316-1522
Angle Bracket

123161522
3813020340: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-379-2513
Mounting Bracket

123792513
0105866: RNCC: 3 | RNVC: 2

8 Jul 2009

5340-12-179-2717
Platte

121792717
183871465: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-348-6275
Lock-Release Lever

123486275
11655501: RNCC: 2 | RNVC: 2
11655501: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-12-349-1895
Metal Grille

123491895
88521 15487: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-365-3720
Mounting Bracket

123653720
2300395-064368.000.0: RNCC: 2 | RNVC: 2
2300395-064368.000.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-191-8418
Lock-Release Lever

121918418
P-897020-403: RNCC: 3 | RNVC: 2
P897020-403: RNCC: 5 | RNVC: 2

9 Mar 1982

5340-12-161-3100
Turnbuckle Body

121613100
M12X1-5LANGLN9185-1-7734-5: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-331-6346
Door Closer

123316346
6188-02.0252 UND 02.0254: RNCC: 3 | RNVC: 2
6188-02.0252-02.0254: RNCC: 5 | RNVC: 2
ELH5/3-B0280+B0282: RNCC: 5 | RNVC: 2
ELH5/3-B280+B282: RNCC: 5 | RNVC: 2

2 Jun 1993

5340-12-358-4545
Spring Loaded Cylinder Fastener

123584545
GN612-12-M20X1,5-AK: RNCC: 3 | RNVC: 2

18 Oct 2002

5340-12-316-4803
Mounting Plate

123164803
P-087043-005: RNCC: 3 | RNVC: 2
P087043-005: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-358-3011
Webbing Strap

123583011
79017/026-4500-1000: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-12-188-1810
Catch Strike

121881810
5800043-1030.00: RNCC: 2 | RNVC: 2
5800043-1030.00: RNCC: 3 | RNVC: 2
5800043-1030: RNCC: 5 | RNVC: 2
5800043-1030: RNCC: 5 | RNVC: 2
5800043-1030: RNCC: 5 | RNVC: 9

11 Jun 1981

5340-12-310-1764
Rod End Clevis

123101764
4-162598: RNCC: 3 | RNVC: 2
309416: RNCC: 5 | RNVC: 2

14 Apr 1987

5340-12-161-2073
Loop Clamp

121612073
G10TAN15802-0A: RNCC: 3 | RNVC: 2
G10ATAN15802-3-1364-5: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-386-8750
Lock Bolt

123868750
SK1059-180270.000.0: RNCC: 3 | RNVC: 2
7118706: RNCC: 5 | RNVC: 2
17889750EGS00: RNCC: 5 | RNVC: 9

11 Oct 2011

5340-12-317-2375
Mounting Bracket

123172375
5-450-091: RNCC: 3 | RNVC: 2
450 091: RNCC: 5 | RNVC: 9

20 Mar 1989

5340-12-334-4193
Double Angle Bracket

123344193
702-241940-901-0: RNCC: 3 | RNVC: 2

5 May 1994

5340-12-369-8467
Access Cover

123698467
SK872-182720.000.0: RNCC: 3 | RNVC: 2
7081480: RNCC: 5 | RNVC: 2

21 Aug 2006

Load More Results