What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 44 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 44 of 178

5340-12-361-9987
Manual Control Handle

123619987
GN 125-32-M8-D: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-12-374-6736
Mounting Plate

123746736
SK971-171210.003.0: RNCC: 3 | RNVC: 2
1728279: RNCC: 5 | RNVC: 2
7087003: RNCC: 5 | RNVC: 2

6 Mar 2008

5340-12-701-3526
Retaining Bail

127013526
VG95211-ML-127013526: RNCC: 2 | RNVC: 2
5.12.5111.4510.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-135-6755
Butt Hinge

121356755
DIN7954-C40-ST-BK: RNCC: 2 | RNVC: 2
C40DIN7954: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-8500
Loop Clamp

127018500
VG95211-ML-127018500: RNCC: 2 | RNVC: 2
5191A-63: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-155-2456
Rod End Clevis

121552456
160-23450-01: RNCC: 3 | RNVC: 2
160-23450-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-174-3373
Retaining Strap

121743373
52-0164-000-11: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-12-334-9332
Handwheel

123349332
NO PRIMARY REF 12-334-9332: RNCC: 3 | RNVC: 2
V-3000-8201: RNCC: 5 | RNVC: 9

4 Jul 1994

5340-12-324-9760
Spring Tension Clip

123249760
105-071-942-13: RNCC: 3 | RNVC: 2

17 Apr 1991

5340-12-197-4419
Electrical-Mechanical Equipment Post

121974419
ESK2000-3-1: RNCC: 3 | RNVC: 2

24 Oct 1983

5340-12-342-7810
Mounting Bracket

123427810
462-151164.000: RNCC: 3 | RNVC: 9
9895019: RNCC: 5 | RNVC: 9

27 Mar 1997

5340-12-314-3017
Double Angle Bracket

123143017
A-145301-008: RNCC: 3 | RNVC: 2
A145301-008: RNCC: 5 | RNVC: 2

23 Jun 1988

5340-12-355-9944
Access Cover

123559944
8320-0019: RNCC: 2 | RNVC: 2
8320-0019: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-12-186-6525
Retaining Clip

121866525
C22136-A1000-C300: RNCC: 3 | RNVC: 2
C22136A1000C300: RNCC: 5 | RNVC: 9

23 Jan 1981

5340-12-380-1420
Snap-In Threaded Standoff

123801420
5221870540: RNCC: 3 | RNVC: 2

30 Sep 2009

5340-12-163-7407
Loop Clamp

121637407
LN9491BM12: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-345-4458
Mounting Bracket

123454458
54.0053.168.00: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-12-327-0085
Mounting Plate

123270085
7002585: RNCC: 3 | RNVC: 2

19 Nov 1991

5340-12-358-1860
Mounting Bracket

123581860
20.118.6075: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-12-360-9343
Mounting Bracket

123609343
13143201: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-301-7919
Double Angle Bracket

123017919
4203 5327: RNCC: 3 | RNVC: 2
42035327: RNCC: 5 | RNVC: 2
42035327ED5006-75: RNCC: 5 | RNVC: 2

9 Nov 1984

5340-12-187-7921
Rod End Connector

121877921
1809043100: RNCC: 3 | RNVC: 2
0002520374: RNCC: 5 | RNVC: 2

11 May 1981

5340-12-342-6246
Transom Chain

123426246
402053: RNCC: 3 | RNVC: 2

10 Mar 1997

5340-12-330-2639

5340-12-322-3253
Double Angle Bracket

123223253
81629204023: RNCC: 3 | RNVC: 2
81.62920.4023: RNCC: 5 | RNVC: 2

10 Aug 1990

5340-12-350-5419
Mechanical Stop

123505419
10063-211600: RNCC: 3 | RNVC: 2
10063-211600: RNCC: 5 | RNVC: 9

12 Apr 2000

5340-12-349-8865
Mounting Plate

123498865
A1Z10283715: RNCC: 2 | RNVC: 2
A1Z10283715: RNCC: 3 | RNVC: 2
20361440: RNCC: 5 | RNVC: 2

20 Jan 2000

5340-12-384-8764
Mounting Plate

123848764
M2727005800000: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-12-370-6452
Dust And Moisture Seal Protective Plug

123706452
350I26: RNCC: 3 | RNVC: 2
GPN 350I26: RNCC: 5 | RNVC: 2
350I26: RNCC: 5 | RNVC: 2
GPN350I26: RNCC: 5 | RNVC: 9

5 Dec 2006

5340-12-332-7384
Loop Clamp

123327384
212 011: RNCC: 3 | RNVC: 2
212.011: RNCC: 5 | RNVC: 2
212011: RNCC: 5 | RNVC: 2
212 011: RNCC: 5 | RNVC: 9

14 Sep 1993

5340-12-700-8590
Threaded End Tensioning Tie Rod

127008590
VG95211-ML-127008590: RNCC: 2 | RNVC: 2
155N1220-25-1,5-560: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-308-9380
Case Corner

123089380
P-244712-751: RNCC: 3 | RNVC: 2
P244712-751: RNCC: 5 | RNVC: 2

28 Nov 1986

5340-12-312-4962
Mounting Bracket

123124962
2300007-120010.000.0: RNCC: 2 | RNVC: 2
2300007-120010.000.0: RNCC: 3 | RNVC: 2
2300007-120010.000.0: RNCC: 5 | RNVC: 2

13 Jan 1988

5340-12-701-3048
Mounting Plate

127013048
VG95211-ML-127013048: RNCC: 2 | RNVC: 2
5.12.5101.6159.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-363-6214
Access Cover

123636214
1873-055530.002.0: RNCC: 3 | RNVC: 2

9 Jul 2004

5340-12-702-4998
Rod End Connector

127024998
VG95211-ML-127024998: RNCC: 2 | RNVC: 2
5.51.5850.0120.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-339-7094
Double Angle Bracket

123397094
2500255-195510.000.0: RNCC: 2 | RNVC: 2
2500255-195510.000.0: RNCC: 3 | RNVC: 2

29 Dec 1995

5340-12-701-4985
Mounting Bracket

127014985
VG95211-ML-127014985: RNCC: 2 | RNVC: 2
5.12.5850.4220.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-368-1485
Manual Control Handle

123681485
6.376-725.0: RNCC: 3 | RNVC: 2
G3 400 103 206 7DT: RNCC: 5 | RNVC: 2

15 Dec 2005

5340-12-320-6102
Helical Compression Spring Retainer

123206102
4900059-751530.006.0: RNCC: 3 | RNVC: 2
1227768: RNCC: 5 | RNVC: 2

30 Jan 1990

5340-12-338-9583
Access Cover

123389583
8 695 520 755: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-12-010-9948

5340-12-157-8889
Escutcheon Plate

121578889
600A667: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-324-0708
Dust And Moisture Seal Protective Plug

123240708
5650320: RNCC: 3 | RNVC: 2
565320: RNCC: 5 | RNVC: 9

18 Jan 1991

5340-12-310-4231
Access Hole Frame

123104231
FAAB003: RNCC: 3 | RNVC: 2
FA AB 003: RNCC: 5 | RNVC: 2

20 May 1987

5340-12-351-5096
Multiple Angle Bracket

123515096
4618903814: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-330-6229
Rod End Clevis

123306229
1795001: RNCC: 3 | RNVC: 2
EZ17950: RNCC: 5 | RNVC: 9

19 Jan 1993

5340-12-330-2191
Lock-Release Lever

123302191
A3.2241: RNCC: 3 | RNVC: 2
A3 2241: RNCC: 5 | RNVC: 2

17 Nov 1992

5340-12-185-8693
Mounting Bracket

121858693
3554700: RNCC: 3 | RNVC: 2
3554700: RNCC: 5 | RNVC: 2

6 Nov 1980

5340-12-350-1365
Nonmetallic Bumper

123501365
2039.0402: RNCC: 3 | RNVC: 2

18 Feb 2000

5340-12-357-9024
Dust And Moisture Seal Protective Cover

123579024
2300042-255158.000: RNCC: 2 | RNVC: 2
2300042-255158.000: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-326-6610
Mending Plate

123266610
78203 49757: RNCC: 2 | RNVC: 2
7820349757: RNCC: 3 | RNVC: 2
78203 49757: RNCC: 5 | RNVC: 9

18 Oct 1991

5340-12-043-2684

5340-12-349-9086
Angle Bracket

123499086
A1Z10283522: RNCC: 2 | RNVC: 2
A1Z10283522: RNCC: 3 | RNVC: 2
20361028: RNCC: 5 | RNVC: 2

24 Jan 2000

5340-12-329-3685
Spring Loaded Cylinder Fastener

123293685
NR.8341: RNCC: 3 | RNVC: 2
FEDERRIEGEL D15MM MESSINGDORN: RNCC: 5 | RNVC: 2
DIAB 005: RNCC: 5 | RNVC: 2
8341: RNCC: 5 | RNVC: 2
2300248-80219.00: RNCC: 5 | RNVC: 9

13 Aug 1992

5340-12-358-4559
Loop Clamp

123584559
6155200067: RNCC: 3 | RNVC: 2

18 Oct 2002

5340-12-302-4758
Loop Clamp

123024758
DIN3016-2-G1-78X15-W5: RNCC: 2 | RNVC: 2
TK5340-018: RNCC: 2 | RNVC: 2
SP78/15SKZ-W5: RNCC: 3 | RNVC: 2
DIN3016-G1-78X15-W5: RNCC: 5 | RNVC: 9
TK-BA35-5340-225: RNCC: 5 | RNVC: 9

4 Jan 1985

5340-12-354-6678
Multiple Angle Bracket

123546678
P-876166-025: RNCC: 3 | RNVC: 2
P876166-025: RNCC: 5 | RNVC: 2

14 Aug 2001

5340-12-156-9263
Resilient Mount

121569263
NO PRIMARY REF 12-156-9263: RNCC: 3 | RNVC: 2
1-6899-01-1-6899-21: RNCC: 5 | RNVC: 9
01-1-6899-21: RNCC: 5 | RNVC: 9
1-6899-02-3-6614: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-189-2626
Pad Eye

121892626
A10-24.972.17.0: RNCC: 3 | RNVC: 2
A10-24-972-17-0: RNCC: 5 | RNVC: 2
A10-24-972-17-0: RNCC: 5 | RNVC: 9
85-691-4676: RNCC: 6 | RNVC: 9

15 Sep 1981

5340-12-190-5743
Nonmetallic Bumper

121905743
DIN95364-A15X13-M4X13-NR55ST: RNCC: 2 | RNVC: 2
2.015.015 D-3019/1155: RNCC: 5 | RNVC: 2
25326/D-BSTN5590: RNCC: 5 | RNVC: 2
53013-M4X13.NR55.ST: RNCC: 5 | RNVC: 2
VG95364-A15X14-NR55ST: RNCC: 5 | RNVC: 9
VG95364-A15X13-M4X13-NR55ST: RNCC: 5 | RNVC: 9

7 Dec 1981

5340-12-171-3400
Door Button

121713400
23230-184806.001.0: RNCC: 2 | RNVC: 2
81669120009: RNCC: 3 | RNVC: 2
81.66912-0009: RNCC: 5 | RNVC: 2
23230-184806-001-0: RNCC: 5 | RNVC: 9
23230-184806.001.0: RNCC: 5 | RNVC: 9

30 Sep 1977

5340-12-364-3900
Angle Bracket

123643900
105-072-722-1: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-701-1464
Angle Bracket

127011464
VG95211-ML-127011464: RNCC: 2 | RNVC: 2
5.12.0146.0051.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-6563
Retaining Strap

127006563
VG95211-ML-127006563: RNCC: 2 | RNVC: 2
5.12.5850.4270.92: RNCC: 3 | RNVC: 2
0501401032969: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-321-5611
Metal Runner

123215611
P-888597-001: RNCC: 3 | RNVC: 2
P888597-001: RNCC: 5 | RNVC: 2

1 Jun 1990

5340-12-320-4893
Handle Grip

123204893
DIN98-E36-AL: RNCC: 2 | RNVC: 2
DIN98-AL-36-E: RNCC: 3 | RNVC: 2

19 Jan 1990

5340-12-338-5293
Mounting Plate

123385293
2.72-34223: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-12-338-7718
Helical Compression Spring Seat

123387718
03783600: RNCC: 3 | RNVC: 2
03783600.824: RNCC: 5 | RNVC: 2

24 Aug 1995

5340-12-043-3297

5340-12-040-8299

5340-12-043-4217

5340-12-391-4171
Dust And Moisture Seal Protective Plug

123914171
320GL36: RNCC: 3 | RNVC: 2
6624750032: RNCC: 5 | RNVC: 2

12 Mar 2013

5340-12-346-0059
Mounting Plate

123460059
2300061-291200.009: RNCC: 2 | RNVC: 2
2300061-291200.009: RNCC: 3 | RNVC: 2
2300061-291200.009: RNCC: 5 | RNVC: 9
9908159: RNCC: 5 | RNVC: 9

28 May 1998

5340-12-094-4808

5340-12-170-0955
Helical Compression Spring Seat

121700955
JJ46813: RNCC: 3 | RNVC: 2

27 Jun 1977

5340-12-393-0345
Turnbuckle

123930345
M5537090200400: RNCC: 3 | RNVC: 2

1 Aug 2013

5340-12-178-3077
Rod End Connector

121783077
183721339: RNCC: 3 | RNVC: 2

12 Apr 1979

5340-12-385-2250
Section Block Clamp

123852250
5849955268: RNCC: 3 | RNVC: 2

11 May 2011

5340-12-319-9223
Dust And Moisture Seal Protective Cap

123199223
911350: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-12-357-2154
Mounting Bracket

123572154
5349023800: RNCC: 3 | RNVC: 2
0004260122: RNCC: 5 | RNVC: 2

22 May 2002

5340-12-317-4371
Flush Catch Claw

123174371
80100066: RNCC: 3 | RNVC: 2

7 Apr 1989

5340-12-043-1202

5340-12-040-0191

5340-12-306-0714
Angle Bracket

123060714
5801984-100010.000.0: RNCC: 2 | RNVC: 2
5801984-100010.000.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-363-3985
Swivel Caster

123633985
490179-004.00.0: RNCC: 3 | RNVC: 2

8 Jun 2004

5340-12-321-5834
Mending Plate

123215834
7068-41000-058-2: RNCC: 3 | RNVC: 2

5 Jun 1990

5340-12-702-5095
Mounting Plate

127025095
VG95211-ML-127025095: RNCC: 2 | RNVC: 2
5.51.6501.1110.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-193-6450
Loop Clamp

121936450
DIN3016-1-B1-65X20-W1-2: RNCC: 2 | RNVC: 2
RS0.65/20: RNCC: 3 | RNVC: 2
DIN3016-B1-65X20-W1-2: RNCC: 3 | RNVC: 2
DIN3016-B1-65X20-W1-2: RNCC: 5 | RNVC: 2
RS65-20: RNCC: 5 | RNVC: 2
RS65/20: RNCC: 5 | RNVC: 2
4100020065: RNCC: 5 | RNVC: 2
VG95931B65X20W1: RNCC: 5 | RNVC: 9
VG95931-B65X20-W1: RNCC: 5 | RNVC: 9

17 Aug 1982

5340-12-321-0102
Antipilferage Seal

123210102
1311-90.01-13-20: RNCC: 3 | RNVC: 2
1311-90-01-13-20: RNCC: 3 | RNVC: 2
42047445: RNCC: 3 | RNVC: 2
42047445EE76-4095: RNCC: 5 | RNVC: 2
1311-01-11-132-01/0: RNCC: 5 | RNVC: 2

16 Mar 1990

5340-12-701-5580
Mounting Plate

127015580
VG95211-ML-127015580: RNCC: 2 | RNVC: 2
5.12.6113.8090.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-306-0207
Door Button

123060207
1865-010240.01.0: RNCC: 3 | RNVC: 9

21 Jan 1986

5340-12-701-6667
Blank Panel

127016667
VG95211-ML-127016667: RNCC: 2 | RNVC: 2
5.12.7210.8040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-301-0050
Angle Bracket

123010050
P-296895-010: RNCC: 3 | RNVC: 2
P296895-010: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-358-0701
Access Cover

123580701
2500262-191140.000.0: RNCC: 2 | RNVC: 2
2500262-191140.000.0: RNCC: 3 | RNVC: 2

10 Sep 2002

5340-12-166-8961
Dust And Moisture Seal Protective Plug

121668961
23290-141006.004: RNCC: 2 | RNVC: 2
4943380133: RNCC: 3 | RNVC: 2
23290-141006.004: RNCC: 3 | RNVC: 2
23290-141006.004: RNCC: 5 | RNVC: 9
23290-141006-004: RNCC: 5 | RNVC: 9

29 Oct 1976

5340-12-188-3503
Resilient Mount

121883503
H64-BAM-6: RNCC: 3 | RNVC: 2
H64BAM6: RNCC: 5 | RNVC: 9
H64-BAM-6: RNCC: 5 | RNVC: 9

2 Jul 1981

5340-12-143-0078
Loop Clamp

121430078
DIN3016-1-E1-26X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU0.26/15: RNCC: 3 | RNVC: 2
DIN3016-E1-26X15-W1-2: RNCC: 3 | RNVC: 2
9400015026: RNCC: 5 | RNVC: 2
RSGU26-15: RNCC: 5 | RNVC: 2
RSGU26/15: RNCC: 5 | RNVC: 2
VG95931-E26X15-W1: RNCC: 5 | RNVC: 9
VG95931E26X15W1: RNCC: 5 | RNVC: 9
DIN3016-E1-26X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-187-4636
Double Angle Bracket

121874636
2300109-063125.000.0: RNCC: 2 | RNVC: 2
2300109-063125.000.0: RNCC: 3 | RNVC: 2
2300109-063125.000.0: RNCC: 3 | RNVC: 2
2300109-063125.000.0: RNCC: 5 | RNVC: 9
2300109-063125-000-0: RNCC: 5 | RNVC: 9
2300109-063125-000-0: RNCC: 5 | RNVC: 9
2300109-063125-000-0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-186-8336
Flush Bolt

121868336
1000093-31720.01.0: RNCC: 2 | RNVC: 2
1000093-31720.01.0: RNCC: 3 | RNVC: 2
1000093-31720-01-0: RNCC: 5 | RNVC: 2
1000093-31720.01.0: RNCC: 5 | RNVC: 9
1000093-31720-01-0: RNCC: 5 | RNVC: 9

11 Feb 1981

5340-12-175-8276
Angle Bracket

121758276
2500008: RNCC: 3 | RNVC: 2

23 Oct 1978

5340-12-179-3017
Nonmetallic Bumper

121793017
0009879440: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-384-9688
Retaining Strap

123849688
5809952268: RNCC: 3 | RNVC: 2

14 Apr 2011

5340-12-321-0842
Escutcheon Plate

123210842
0116 5854: RNCC: 3 | RNVC: 2
01165854EF8930-03: RNCC: 5 | RNVC: 2

26 Mar 1990

5340-12-371-9679
Spring Tension Clip

123719679
90.402.04.852: RNCC: 3 | RNVC: 2
3095431: RNCC: 5 | RNVC: 2

5 Jun 2007

5340-12-025-8908

5340-12-362-2844
Loop Clamp

123622844
LN9490BM13: RNCC: 2 | RNVC: 2

3 Feb 2004

5340-12-322-8368
Access Cover

123228368
1170501: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-12-347-2885
Mounting Bracket

123472885
80996050172: RNCC: 3 | RNVC: 2
83091436071: RNCC: 5 | RNVC: 9
80.99605.0172: RNCC: 5 | RNVC: 9

23 Nov 1998

5340-12-361-9912
Butt Hinge

123619912
1054-U10: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-12-338-2402
Angle Bracket

123382402
1989201: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-12-302-6996
Hand Crank

123026996
2996.54.25: RNCC: 3 | RNVC: 2

23 Jan 1985

5340-12-126-5754

5340-12-371-6149
Access Cover

123716149
105-62572: RNCC: 3 | RNVC: 2

26 Apr 2007

5340-12-387-4473
Caster Wheel

123874473
720224: RNCC: 3 | RNVC: 2

16 Dec 2011

5340-12-198-8071
Shock Mount Pad

121988071
3147660397: RNCC: 3 | RNVC: 2

28 Feb 1984

5340-12-027-0730

5340-12-325-7712
Flush Lock

123257712
5800175: RNCC: 3 | RNVC: 2

8 Jul 1991

5340-12-314-2062
Angle Bracket

123142062
272.1768.213: RNCC: 2 | RNVC: 2
272.1768.213: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-12-378-6890
Angle Bracket

123786890
71012379: RNCC: 3 | RNVC: 2

4 May 2009

5340-12-314-1244
Mounting Bracket

123141244
6214910741: RNCC: 3 | RNVC: 2
621 491 07 41: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-313-6305
Bridge Clamp

123136305
E9125: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-12-343-9680
Manual Control Lever

123439680
536519-8809.000: RNCC: 2 | RNVC: 2
536519-8809.000: RNCC: 3 | RNVC: 2

20 Aug 1997

5340-12-171-2835
Bow Handle

121712835
81970010233: RNCC: 3 | RNVC: 2
00380T31899: RNCC: 5 | RNVC: 2

26 Sep 1977

5340-12-364-2062
Double Angle Bracket

123642062
4256222531: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-322-5873
Loop Clamp

123225873
18117: RNCC: 3 | RNVC: 2
5L.6896.001.13: RNCC: 5 | RNVC: 2

4 Sep 1990

5340-12-346-4025
Dust And Moisture Seal Protective Cap

123464025
13 230 047: RNCC: 3 | RNVC: 2

21 Jul 1998

5340-12-306-0791
Mending Plate

123060791
P-295645-003: RNCC: 3 | RNVC: 2
P295645-003: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-343-6728
Angle Bracket

123436728
111G08502: RNCC: 3 | RNVC: 2
111G08502/1: RNCC: 5 | RNVC: 2
111 G08 502 D1: RNCC: 5 | RNVC: 2

14 Jul 1997

5340-12-701-9458
Rod End Clevis

127019458
VG95211-ML-127019458: RNCC: 2 | RNVC: 2
5.12.4207.1110.00: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-344-5779
Access Cover

123445779
2500255-193540.004.0: RNCC: 2 | RNVC: 2
2500255-193540.004.0: RNCC: 3 | RNVC: 2

11 Nov 1997

5340-12-183-2777
Halter

121832777
1000093-32220.01.0: RNCC: 2 | RNVC: 2
1000093-32220.01.0: RNCC: 3 | RNVC: 2
1000093-32220-01-0: RNCC: 5 | RNVC: 2
1000093-32220-01-0: RNCC: 5 | RNVC: 9
1000093-32220.01.0: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-12-308-2929
Double Angle Bracket

123082929
P-875266-001: RNCC: 3 | RNVC: 2
P875266-001: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-344-4482
Mounting Bracket

123444482
P-296880-065: RNCC: 3 | RNVC: 2
P296880-065: RNCC: 5 | RNVC: 2

28 Oct 1997

5340-12-308-3408
Webbing Strap

123083408
DAN80-1-300: RNCC: 3 | RNVC: 2

1 Oct 1986

5340-12-170-8113
Helical Compression Spring Retainer

121708113
306-096-126-108-110: RNCC: 3 | RNVC: 2
591559: RNCC: 5 | RNVC: 2
81.67196-5005: RNCC: 5 | RNVC: 2
81671965005: RNCC: 5 | RNVC: 2
23251-200646.000.0: RNCC: 5 | RNVC: 9
23251-200646-000-0: RNCC: 5 | RNVC: 9

11 Aug 1977

5340-12-388-9686
Angle Bracket

123889686
122W161670.001.0: RNCC: 2 | RNVC: 2
122W161670.001.0: RNCC: 3 | RNVC: 2

10 May 2012

5340-12-140-7766
Druck- Manschette

5340-12-121-0225
Halter

5340-12-122-7071
Gewindeeinsatz

5340-12-145-9177
Verbindungs Platte

5340-12-198-3417
Rod End Connector

121983417
27 0322 019: RNCC: 2 | RNVC: 2
9837771: RNCC: 3 | RNVC: 2
27 0322 019: RNCC: 5 | RNVC: 9
9837771: RNCC: 5 | RNVC: 9
270322019: RNCC: 5 | RNVC: 9

18 Jan 1984

5340-12-393-5100
Bumper

123935100
7128994: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-363-2828
Hasp Staple

123632828
405997: RNCC: 3 | RNVC: 2

20 May 2004

5340-12-365-9302
Mounting Bracket

123659302
9425532440: RNCC: 3 | RNVC: 2

18 Feb 2005

5340-12-355-1042
Mechanical Stop

123551042
AFG0538471: RNCC: 3 | RNVC: 2
MBCS1130: RNCC: 5 | RNVC: 2

9 Oct 2001

5340-12-122-3093
Nonmetallic Bumper

121223093
0009870240: RNCC: 3 | RNVC: 2
GH138: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-352-1203
Mounting Bracket

123521203
5202276: RNCC: 3 | RNVC: 2

18 Oct 2000

5340-12-376-8337
Manual Control Handle

123768337
20127-333: RNCC: 3 | RNVC: 2

11 Nov 2008

5340-12-191-9624
Pad Eye

121919624
2898220: RNCC: 3 | RNVC: 2
289.8220: RNCC: 5 | RNVC: 2

17 Mar 1982

5340-12-319-9088
Access Door

123199088
1229-312: RNCC: 2 | RNVC: 2
533221-8106.000: RNCC: 3 | RNVC: 2
533221-8106.000: RNCC: 5 | RNVC: 9

16 Nov 1989

5340-12-027-3365

5340-12-360-3254
Butt Hinge Leaf

123603254
3514330130: RNCC: 3 | RNVC: 2
3514330130: RNCC: 5 | RNVC: 2

8 May 2003

5340-12-350-7554
Mounting Plate

123507554
105-86597.12: RNCC: 3 | RNVC: 2

16 May 2000

5340-12-319-3352
Swivel Caster

123193352
2477DIK100P60: RNCC: 3 | RNVC: 2
2477DHK100P60: RNCC: 5 | RNVC: 9

25 Sep 1989

5340-12-318-4684
Mounting Bracket

123184684
81083405139: RNCC: 3 | RNVC: 2
81.08340.5139: RNCC: 5 | RNVC: 2

18 Jul 1989

5340-12-374-9553
Genera Guide Rail

123749553
279.646 577: RNCC: 3 | RNVC: 2

9 Apr 2008

5340-12-175-1883
Helical Compression Spring Retainer

121751883
3819190022: RNCC: 3 | RNVC: 2

30 Aug 1978

5340-12-340-2629
Double Angle Bracket

123402629
136L54008: RNCC: 3 | RNVC: 2

20 Mar 1996

5340-12-319-4802
Mending Plate

123194802
504048: RNCC: 3 | RNVC: 2

5 Oct 1989

5340-12-310-7339
Bow Handle

123107339
23111-4669.00: RNCC: 2 | RNVC: 2
23111-4669.00: RNCC: 3 | RNVC: 2
23111-4669.00: RNCC: 5 | RNVC: 9
9867460: RNCC: 5 | RNVC: 9

25 Jun 1987

5340-12-356-1373
Snap-In Plain Standoff

123561373
0029973286: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-12-326-5872
Mending Plate

123265872
160.19.0015: RNCC: 2 | RNVC: 2
160.19.0015: RNCC: 3 | RNVC: 2

10 Oct 1991

5340-12-389-1539
Multiple Angle Bracket

123891539
2300588-351200.003: RNCC: 2 | RNVC: 2
2300588-351200.003: RNCC: 3 | RNVC: 2

30 May 2012

5340-12-350-7645
Runner

123507645
49.1825.0025: RNCC: 3 | RNVC: 2

17 May 2000

5340-12-328-3921
Angle Bracket

123283921
CF 842 029 AE: RNCC: 2 | RNVC: 2
CF 842 029 AE: RNCC: 3 | RNVC: 2
CF 842 029 AE: RNCC: 5 | RNVC: 2

14 May 1992

5340-12-354-8059
Bow Handle

123548059
CBD45461P01: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-324-7202
Loop Clamp

123247202
DIN3015-S-A-2-R-17,2-PP-W1: RNCC: 2 | RNVC: 2
HRS2S17,2PP STMBL: RNCC: 3 | RNVC: 2
RCPR1-217,2: RNCC: 3 | RNVC: 2
SPAL4017,2PP-DPA6-AS: RNCC: 3 | RNVC: 2
RCPR1-217,2: RNCC: 5 | RNVC: 2
DIN3015-SA2R-17,2PP-W1: RNCC: 5 | RNVC: 2
91631260: RNCC: 5 | RNVC: 2
HRS2S17,2PP: RNCC: 5 | RNVC: 2
HR2SS3-8PP: RNCC: 5 | RNVC: 9

19 Mar 1991

5340-12-187-7201
Sealing Plug Assembly

121877201
P-243825-401: RNCC: 3 | RNVC: 2
P243825-401: RNCC: 5 | RNVC: 2

4 May 1981

5340-12-194-3845
Bridge Clamp

121943845
A-616839-003: RNCC: 3 | RNVC: 2
A616839-003: RNCC: 5 | RNVC: 2

28 Oct 1982

5340-12-190-4198
Electrical-Mechanical Equipment Post

121904198
P-896150-009: RNCC: 3 | RNVC: 2
P896150-009: RNCC: 5 | RNVC: 2

25 Nov 1981

5340-12-304-9621
Butt Hinge Leaf

123049621
P-296921-401: RNCC: 3 | RNVC: 2
P296921-401: RNCC: 5 | RNVC: 2

11 Sep 1985

5340-12-186-0304
Door Handle

121860304
12433.0.602: RNCC: 3 | RNVC: 2
12433-0-006: RNCC: 5 | RNVC: 2

22 Nov 1980

5340-12-382-8728
Manual Control Handle

123828728
41287901300: RNCC: 3 | RNVC: 2

18 Aug 2010

5340-12-164-4549
Retaining Strap

121644549
4039950022: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-363-7176
Access Cover

123637176
N90147001: RNCC: 3 | RNVC: 2

16 Jul 2004

5340-12-199-6030
Spring Holder

121996030
02.10.057.001.004: RNCC: 3 | RNVC: 2
02.10.057.001.004: RNCC: 5 | RNVC: 9
0210057001004: RNCC: 5 | RNVC: 9

16 May 1984

5340-12-192-5294
Dust And Moisture Seal Protective Plug

121925294
75626: RNCC: 3 | RNVC: 2
75626: RNCC: 3 | RNVC: 9

3 May 1982

5340-12-348-7187
Mounting Plate

123487187
800004801: RNCC: 3 | RNVC: 2

10 Aug 1999

5340-12-305-7733
Electrical-Mechanical Equipment Post

123057733
3810021011: RNCC: 3 | RNVC: 2
38100 21011: RNCC: 5 | RNVC: 2

11 Dec 1985

5340-12-313-7505
Spring Tension Clip

123137505
5802017-711100.09: RNCC: 2 | RNVC: 2
5802017-711100.09: RNCC: 3 | RNVC: 2
5802017-711100.09: RNCC: 5 | RNVC: 9
5802017-711100.09: RNCC: 5 | RNVC: 9

30 Apr 1988

5340-12-387-3541
Clamping Catch

123873541
385101688P: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-12-356-7494
Helical Compression Spring Seat

123567494
114306647: RNCC: 3 | RNVC: 2
077762050: RNCC: 5 | RNVC: 2

3 Apr 2002

5340-12-356-0722
Retaining Bail

123560722
114287: RNCC: 3 | RNVC: 9

18 Jan 2002

5340-12-384-2421
Dust And Moisture Seal Protective Cap

123842421
WM 22204: RNCC: 3 | RNVC: 2

7 Feb 2011

5340-12-179-7361
Mounting Bracket

121797361
4257520411: RNCC: 3 | RNVC: 2
4257520411: RNCC: 5 | RNVC: 2

25 Jul 1979

5340-12-366-1343
Angle Bracket

123661343
S991M5069101: RNCC: 2 | RNVC: 2
S991M5069101: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-12-330-7695
Access Cover

123307695
10147601: RNCC: 3 | RNVC: 2

5 Feb 1993

5340-12-366-5077
Butt Hinge

123665077
2184 4577-690: RNCC: 3 | RNVC: 2
2184 4577-690: RNCC: 5 | RNVC: 2

2 May 2005

5340-12-308-9721

5340-12-348-0794
Hand Crank

123480794
6674030046: RNCC: 3 | RNVC: 2

9 Apr 1999

5340-12-382-8181
Retaining Strap

123828181
DIN3016-1-F1-60X20-W1-2-EPDM: RNCC: 2 | RNVC: 2
RSGU-2-60/20-W1: RNCC: 3 | RNVC: 2
09420020060: RNCC: 5 | RNVC: 2

12 Aug 2010

5340-12-315-3704
Quick Release Plunger

123153704
GN614-5-NI: RNCC: 3 | RNVC: 2
5HWN208: RNCC: 3 | RNVC: 2
03070-05: RNCC: 3 | RNVC: 2
RBN410.4-5: RNCC: 3 | RNVC: 2
NLM307-05: RNCC: 5 | RNVC: 9
NLM3070-05: RNCC: 5 | RNVC: 9

18 Oct 1988

5340-12-351-9613
Mounting Bracket

123519613
1700.014.2: RNCC: 3 | RNVC: 2
17014-2: RNCC: 5 | RNVC: 2

20 Sep 2000

5340-12-354-4846
Permanent Magnet

123544846
177C05017: RNCC: 3 | RNVC: 2
564 150/1: RNCC: 5 | RNVC: 2

18 Jul 2001

5340-12-305-4919
Double Angle Bracket

123054919
CF 418 139 C: RNCC: 2 | RNVC: 2
CF 418 139 C: RNCC: 3 | RNVC: 2
CF 418 139 C: RNCC: 5 | RNVC: 2
CF418139C: RNCC: 5 | RNVC: 2
CF418139C: RNCC: 5 | RNVC: 2
CF 418 139 C: RNCC: 5 | RNVC: 2
CF418139C: RNCC: 5 | RNVC: 2

13 Nov 1985

5340-12-355-3506
Cushioning Pad

123553506
08.1588-202.07.02.0: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-12-349-8211
Dust And Moisture Seal Protective Plug

123498211
36 31 2 314 779: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-165-7196
Staub- Und F Kappe

5340-12-349-8202
Dust And Moisture Seal Protective Cap

123498202
51 25 2 313 184: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-368-8817
Spring Tension Clip

123688817
1960/V: RNCC: 3 | RNVC: 2

3 May 2006

5340-12-353-3629
Loop Clamp

123533629
RANR2-2 1/2: RNCC: 3 | RNVC: 2

15 Mar 2001

5340-12-378-3941
Door Handle

123783941
3.30.149.0(841): RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-349-8148
Dust And Moisture Seal Protective Plug

123498148
11 00016 4 2: RNCC: 3 | RNVC: 2
81960020258: RNCC: 5 | RNVC: 2

12 Jan 2000

5340-12-701-7880
Retaining Band

127017880
5.12.7805.1090.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-303-4530
Swivel Caster

123034530
CF 105 529 -X: RNCC: 3 | RNVC: 2
CF 105 529 -X: RNCC: 5 | RNVC: 2

25 Mar 1985

5340-12-143-6415

5340-12-011-5221

5340-12-173-2193
Retaining Strap

121732193
4178923: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-12-392-8896
Access Cover

123928896
2321514000: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-12-190-3290
Rod End Connector

121903290
PH03.06: RNCC: 3 | RNVC: 2
PH0306: RNCC: 5 | RNVC: 2

23 Nov 1981

5340-12-179-2695
Retaining Strap

121792695
183253247: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-042-5151

5340-12-350-1525
Loop Clamp

123501525
LN9490BM80: RNCC: 2 | RNVC: 2

21 Feb 2000

5340-12-162-6539
Einbau- Schlosz

5340-12-341-9091
Schwenkb Laufrolle

5340-12-121-1469
Schwenkb Laufrolle

5340-12-124-0816
Schnalle

5340-12-134-9737
Gurtgewebe- Riemen

5340-12-136-0610
Band- Scharnier

5340-12-138-0479
Anschlag Scharnier

5340-12-139-7037
An Scharnierlappen

5340-12-308-5530
Dust And Moisture Seal Protective Plug

123085530
049121099: RNCC: 3 | RNVC: 2

22 Oct 1986

5340-12-302-8346
Lock-Release Lever

123028346
4900123-920000.01: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-301-0664
Spring Tension Clip

123010664
54.0028.626.00: RNCC: 3 | RNVC: 2

20 Sep 1984

5340-12-158-2831
Nonmetallic Bumper

121582831
1393001-19400: RNCC: 2 | RNVC: 2
1393001-19400: RNCC: 3 | RNVC: 2
1393001-19400: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-337-6440
Strap Hinge

123376440
100050659: RNCC: 3 | RNVC: 2
10 0050 659: RNCC: 5 | RNVC: 2

22 Mar 1995

5340-12-331-4675
Dust And Moisture Seal Protective Plug

123314675
965404230: RNCC: 3 | RNVC: 2

7 May 1993

5340-12-388-0361
Mounting Bracket

123880361
5840986039: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-12-388-0680
Access Cover

123880680
5820520020: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-12-360-2989
Loop Clamp

123602989
0009502261: RNCC: 3 | RNVC: 2
0009502261: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-373-8327
Angle Bracket

123738327
L251M2812101: RNCC: 3 | RNVC: 2

11 Dec 2007

5340-12-311-3763
Angle Bracket

123113763
2300227-321061.000: RNCC: 3 | RNVC: 2
2300227-321061.000: RNCC: 5 | RNVC: 9

25 Aug 1987

5340-12-303-6779
Nut And Bolt Locking Plate

123036779
3610521097: RNCC: 3 | RNVC: 2
36105 21097: RNCC: 5 | RNVC: 9

22 Apr 1985

5340-12-366-8166
Dust And Moisture Seal Protective Cap

123668166
4627 307 007: RNCC: 3 | RNVC: 2
00120704: RNCC: 5 | RNVC: 2

13 Jun 2005

5340-12-378-2275
Mounting Bracket

123782275
41260353: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-12-368-8896
Access Cover

123688896
9BEU10279-BGW: RNCC: 3 | RNVC: 2

4 May 2006

5340-12-381-6171
Spacing Threaded Standoff

123816171
500300461: RNCC: 3 | RNVC: 2

10 Mar 2010

5340-12-390-0504
Spacing Threaded Standoff

123900504
303583: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-135-6522

5340-12-310-8876
Access Cover

123108876
5801882-1320: RNCC: 2 | RNVC: 2
7820349420: RNCC: 3 | RNVC: 2
78203 49420: RNCC: 5 | RNVC: 9

6 Jul 1987

5340-12-174-2780
Casement Fastener

121742780
CH12435: RNCC: 3 | RNVC: 2
CH12435: RNCC: 5 | RNVC: 9
4284-170: RNCC: 5 | RNVC: 9

19 Jun 1978

5340-12-316-8216
Plug Button

123168216
NO PRIMARY REF 12-316-8216: RNCC: 3 | RNVC: 2
48550.04: RNCC: 5 | RNVC: 9

15 Feb 1989

5340-12-328-4862
Access Cover

123284862
C42080-A34-C16: RNCC: 2 | RNVC: 2
C42080-A34-C16: RNCC: 3 | RNVC: 2

23 May 1992

5340-12-315-4959
Angle Bracket

123154959
5802005-201900.04: RNCC: 2 | RNVC: 2
65.7789.255.03-A001: RNCC: 3 | RNVC: 2

29 Oct 1988

5340-12-177-5256
Angle Bracket

121775256
009-039.211-010: RNCC: 3 | RNVC: 2
1200019-121100-010: RNCC: 5 | RNVC: 2
009-039-211-010: RNCC: 5 | RNVC: 9
1200019-121100-010: RNCC: 5 | RNVC: 9
1200019-121100.010: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-307-0504
Nonmetallic Bumper

123070504
281-201-090-190: RNCC: 3 | RNVC: 2

2 May 1986

5340-12-317-7447
Mounting Plate

123177447
P-230234-015: RNCC: 3 | RNVC: 2
P230234-015: RNCC: 5 | RNVC: 2

8 May 1989

5340-12-303-2420
Double Angle Bracket

123032420
P-886728-001: RNCC: 3 | RNVC: 2
P886728-001: RNCC: 5 | RNVC: 2

8 Mar 1985

5340-12-363-1324
Mounting Bracket

123631324
5981-283020.000.0: RNCC: 3 | RNVC: 2

6 May 2004

5340-12-345-7959
Nonmetallic Bumper

123457959
2300389-182000.002.0: RNCC: 2 | RNVC: 2
2300389-182000.002.0: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-12-344-4274
Mounting Bracket

123444274
P-297201-427: RNCC: 3 | RNVC: 2
P297201-427: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-306-1714
Detent Plunger

123061714
421-112051.02.3: RNCC: 3 | RNVC: 2
421-112051-02-3: RNCC: 5 | RNVC: 2

3 Feb 1986

5340-12-158-1307
Bail Handle

121581307
5800357.804000: RNCC: 2 | RNVC: 2
038405: RNCC: 3 | RNVC: 2
38401: RNCC: 5 | RNVC: 2
5800357-804000: RNCC: 5 | RNVC: 9
38405: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-339-0056
Nonmetallic Bumper

123390056
1509053: RNCC: 3 | RNVC: 2
1509053: RNCC: 5 | RNVC: 2

26 Sep 1995

5340-12-334-8771
Nut And Bolt Locking Plate

123348771
5129940030: RNCC: 3 | RNVC: 2
512 994 00 30: RNCC: 5 | RNVC: 2

30 Jun 1994

5340-12-305-6711
Mending Plate

123056711
170487: RNCC: 3 | RNVC: 2

3 Dec 1985

5340-12-323-2764
Support Hook

123232764
929-LACK RAL6031: RNCC: 3 | RNVC: 2
42333824: RNCC: 5 | RNVC: 2

9 Nov 1990

5340-12-183-9889
Angle Bracket

121839889
03415395: RNCC: 3 | RNVC: 2
3415395EE5017-64: RNCC: 5 | RNVC: 2

10 Jun 1980

5340-12-318-0712
Dust And Moisture Seal Protective Cap-Plug

123180712
080000017011: RNCC: 3 | RNVC: 2
080 000 017 011: RNCC: 5 | RNVC: 2
81.95307.0016: RNCC: 5 | RNVC: 2
81953070016: RNCC: 5 | RNVC: 2

8 Jun 1989

5340-12-316-6925
Bow Handle

123166925
10501-116: RNCC: 3 | RNVC: 2
1355686: RNCC: 5 | RNVC: 2

2 Feb 1989

5340-12-377-3194
Loop Clamp

123773194
17317192: RNCC: 3 | RNVC: 2

8 Jan 2009

5340-12-330-2111
Clamping Catch

123302111
01207800: RNCC: 3 | RNVC: 2
50258900 UND 03777400: RNCC: 5 | RNVC: 2

14 Nov 1992

5340-12-375-7066
Retaining Strap

123757066
253715: RNCC: 3 | RNVC: 2

26 Jun 2008

5340-12-360-7081
Mounting Bracket

123607081
000611.245200.00: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-198-3269
Metal Runner

121983269
62.6479.911.00-A001: RNCC: 3 | RNVC: 2
590602: RNCC: 5 | RNVC: 2

16 Jan 1984

5340-12-389-2070
Mortise Lock

123892070
110242: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-12-331-9617
Dust And Moisture Seal Protective Plug

123319617
1213 307 061: RNCC: 3 | RNVC: 2
5000241658: RNCC: 5 | RNVC: 2
1213307061: RNCC: 5 | RNVC: 2
1213307061: RNCC: 5 | RNVC: 9

9 Jul 1993

5340-12-375-0557
Mechanical Stop

123750557
161792803: RNCC: 3 | RNVC: 2

17 Apr 2008

5340-12-390-2658
Plug Button

123902658
700030905000: RNCC: 3 | RNVC: 2

24 Oct 2012

5340-12-307-3358
Angle Bracket

123073358
42036051E5021-68: RNCC: 3 | RNVC: 2

5 Jun 1986

5340-12-349-1918
Metal Grille

123491918
8852116084: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-388-2134
Pipe Hanger

123882134
5840983039: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-12-387-9127
Spring Loaded Cylinder Fastener

123879127
7041837: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-12-383-1788
Mounting Bracket

123831788
150 905 002: RNCC: 3 | RNVC: 2

22 Sep 2010

5340-12-150-3996

5340-12-177-5928

5340-12-194-5966

5340-12-375-8418
Section Block Clamp

123758418
X58499100005: RNCC: 3 | RNVC: 2

10 Jul 2008

5340-12-157-3419
Angle Bracket

121573419
6198335: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-366-9519
Access Cover

123669519
8103208800: RNCC: 3 | RNVC: 2

23 Jun 2005

5340-12-334-4379
Mounting Bracket

123344379
4944201286: RNCC: 3 | RNVC: 2
120543A: RNCC: 5 | RNVC: 2
947172: RNCC: 5 | RNVC: 2
947172: RNCC: 5 | RNVC: 9

9 May 1994

5340-12-371-6596
Retaining Clip

123716596
7M0864994: RNCC: 3 | RNVC: 2

3 May 2007

5340-12-349-2368
Manual Control Handle

123492368
071444-760: RNCC: 3 | RNVC: 2

13 Oct 1999

5340-12-309-1736
Butt Hinge Leaf

123091736
2989051206: RNCC: 3 | RNVC: 2

19 Dec 1986

5340-12-136-3329
Retaining Strap

121363329
114A61018E1: RNCC: 3 | RNVC: 2
8399951110: RNCC: 5 | RNVC: 2
114A61018: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-333-8673
Double Angle Bracket

123338673
3524313340: RNCC: 3 | RNVC: 2
352 431 33 40: RNCC: 5 | RNVC: 2

18 Feb 1994

5340-12-126-5121

5340-12-191-0845
Lock-Release Lever

121910845
100346-2010: RNCC: 3 | RNVC: 2

11 Jan 1982

5340-12-139-6033

5340-12-353-0393
Angle Bracket

123530393
54.0084.931.05: RNCC: 3 | RNVC: 2

23 Jan 2001

5340-12-300-6750
Angle Bracket

123006750
4356108212: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-363-5171
Angle Bracket

123635171
ATF5211052: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-183-0311
Catch Strike

121830311
81926202018: RNCC: 3 | RNVC: 2

13 Mar 1980

5340-12-375-6150
Retaining Clip

123756150
0009918270: RNCC: 3 | RNVC: 2
A0009918270: RNCC: 5 | RNVC: 9

18 Jun 2008

5340-12-373-3531
Access Cover

123733531
L524M2018102: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-12-179-2792
Halter

121792792
4353000086: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-366-4109
Webbing Strap

123664109
01-300 02509: RNCC: 3 | RNVC: 2

21 Apr 2005

5340-12-303-6541
Case Corner

123036541
2360-263020.02.0: RNCC: 2 | RNVC: 2
2360-263020.02.0: RNCC: 3 | RNVC: 2
1213807: RNCC: 5 | RNVC: 2
2360-263020.02.0: RNCC: 5 | RNVC: 2
2360-263020-02-0: RNCC: 5 | RNVC: 9

18 Apr 1985

5340-12-701-7116
Retaining Band

127017116
VG95211-ML-127017116: RNCC: 2 | RNVC: 2
5.12.7601.3061.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-5494
Loop Clamp

121875494
6.226.0.977.006.4: RNCC: 3 | RNVC: 9
6-226-0-977-006-4: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-374-8626
Angle Bracket

123748626
SK976-194220.002.0: RNCC: 3 | RNVC: 2
1300776: RNCC: 5 | RNVC: 9

1 Apr 2008

5340-12-326-7108
Dust And Moisture Seal Protective Plug

123267108
59316-002-4: RNCC: 3 | RNVC: 2
59316-002-4.EPDM40: RNCC: 5 | RNVC: 2

22 Oct 1991

5340-12-308-7071
Angle Bracket

123087071
P-295435-044: RNCC: 3 | RNVC: 2
P295435-044: RNCC: 5 | RNVC: 2

10 Nov 1986

5340-12-702-6547
Clamping Catch

127026547
VG95211-ML-127026547: RNCC: 2 | RNVC: 2
N1295: RNCC: 3 | RNVC: 2
0501403195599: RNCC: 5 | RNVC: 2

6 Apr 1995

5340-12-352-6113
Strap Hinge

123526113
8301-0009: RNCC: 3 | RNVC: 2

30 Nov 2000

5340-12-315-5143
Mending Plate

123155143
4616410113: RNCC: 3 | RNVC: 2
9408507790: RNCC: 5 | RNVC: 2
721 1 65 805 1: RNCC: 5 | RNVC: 9

29 Oct 1988

5340-12-319-4502
Access Cover

123194502
2782-364000.000.0: RNCC: 2 | RNVC: 2
2782-364000.000.0: RNCC: 3 | RNVC: 2

3 Oct 1989

5340-12-090-7534

5340-12-197-0761
Double Angle Bracket

121970761
4356647014: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-12-388-2327
Angle Bracket

123882327
865341703: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-12-320-8818
Access Cover

123208818
2V 5072-A: RNCC: 3 | RNVC: 2
2V 5072-A: RNCC: 5 | RNVC: 9

1 Mar 1990

5340-12-319-5027
Mending Plate

123195027
4900059-748080.004.0: RNCC: 3 | RNVC: 2
1227147: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-385-5380
Retaining Bail

123855380
10186-180020.006.0: RNCC: 2 | RNVC: 2
10186-180020.006.0: RNCC: 3 | RNVC: 2

14 Jun 2011

5340-12-313-4389
Angle Bracket

123134389
4.0517: RNCC: 3 | RNVC: 2

31 Mar 1988

5340-12-312-9047
Handwheel

123129047
5801984-983400.000.0: RNCC: 2 | RNVC: 2
5801984-983400.000.0: RNCC: 3 | RNVC: 2

18 Feb 1988

5340-12-332-4364
Plug Button

123324364
5-470-630: RNCC: 3 | RNVC: 2
470 630: RNCC: 5 | RNVC: 9
5-470 630: RNCC: 5 | RNVC: 9
5-470630: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-12-321-6351
Angle Bracket

123216351
2300232-060000.005.0: RNCC: 2 | RNVC: 2
2300232-060000.005.0: RNCC: 3 | RNVC: 2
2300232-060000.005.02: RNCC: 5 | RNVC: 9
2300232-060000.005.02: RNCC: 5 | RNVC: 9

11 Jun 1990

5340-12-329-7769
Pad Eye

123297769
7068-21220-000-2: RNCC: 3 | RNVC: 2

26 Sep 1992

5340-12-194-8873
Strap Fastener Loop

121948873
3200016: RNCC: 3 | RNVC: 2

15 Dec 1982

5340-12-362-8526
Double Angle Bracket

123628526
51-76862-1: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-12-321-3837
Angle Bracket

123213837
58R061-0-7: RNCC: 2 | RNVC: 2
58R061-0-7: RNCC: 3 | RNVC: 2

11 May 1990

5340-12-306-3993
Mending Plate

123063993
V22.917.21-2: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-319-3840
Angle Bracket

123193840
C119-A31-C312: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-321-3689
Caster Frame

123213689
1774701: RNCC: 3 | RNVC: 2

10 May 1990

5340-12-316-8044
Clamping Catch

123168044
323-M: RNCC: 3 | RNVC: 2
91719173: RNCC: 5 | RNVC: 2

14 Feb 1989

5340-12-334-6610
Escutcheon Plate

123346610
171837355043: RNCC: 3 | RNVC: 2

7 Jun 1994

5340-12-090-4678

5340-12-164-5074
Retaining Strap

121645074
164083005: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-383-3271
Access Cover

123833271
38012-990700.01: RNCC: 2 | RNVC: 2
38012-990700.01: RNCC: 5 | RNVC: 2

7 Oct 2010

5340-12-318-2024
Mending Plate

123182024
213G-80-T7: RNCC: 3 | RNVC: 2

20 Jun 1989

5340-12-131-5493

5340-12-323-7919
Double Angle Bracket

123237919
0289 6065: RNCC: 3 | RNVC: 2

19 Dec 1990

5340-12-312-7812
Electrical-Mechanical Equipment Post

123127812
461.001.001: RNCC: 3 | RNVC: 2
351.34854: RNCC: 5 | RNVC: 2

4 Feb 1988

5340-12-326-7287
Expansion Plug

123267287
1480559006: RNCC: 3 | RNVC: 2
1480559006: RNCC: 5 | RNVC: 2
1480559006: RNCC: 5 | RNVC: 2
5001005475: RNCC: 5 | RNVC: 2
1480559006: RNCC: 5 | RNVC: 9

23 Oct 1991

5340-12-156-9004

5340-12-372-5177
Dust And Moisture Seal Protective Cap

123725177
10014281: RNCC: 3 | RNVC: 2

24 Jul 2007

5340-12-360-9927
Access Cover

123609927
15075701: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-353-0301
Access Cover

123530301
1216 1763: RNCC: 3 | RNVC: 2

22 Jan 2001

5340-12-364-1428
Mounting Plate

123641428
T621P1002310: RNCC: 3 | RNVC: 2

25 Aug 2004

5340-12-319-9606
Dust And Moisture Seal Protective Plug

123199606
620U7B: RNCC: 3 | RNVC: 2
GPN620,U7B: RNCC: 5 | RNVC: 9

21 Nov 1989

5340-12-043-3424

5340-12-354-8293
Angle Bracket

123548293
2300279-4510.01: RNCC: 2 | RNVC: 2
2300279-4510.01: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-091-4476

5340-12-317-2553
Access Cover

123172553
3212610133: RNCC: 3 | RNVC: 2

21 Mar 1989

5340-12-317-2993
Nonmetallic Bumper

123172993
3229872140: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-357-6101
Pad Eye

123576101
CBD45331P03: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-334-3224
Mounting Bracket

123343224
4944201186: RNCC: 3 | RNVC: 2
947171: RNCC: 5 | RNVC: 2
947171: RNCC: 5 | RNVC: 9

27 Apr 1994

5340-12-392-9883
Angle Bracket

123929883
4000003689: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-12-346-2714
Anschlagecke

123462714
10.0000.094: RNCC: 2 | RNVC: 2
10.0000.094: RNCC: 3 | RNVC: 2

6 Jul 1998

5340-12-316-8295
Bridge Clamp

123168295
2300279-5000.40: RNCC: 2 | RNVC: 2
2300279-5000.40: RNCC: 3 | RNVC: 2
2300279-5000.40: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-367-6775
Angle Bracket

123676775
6674700881: RNCC: 3 | RNVC: 2

22 Sep 2005

5340-12-353-7628
Pipe Hanger

123537628
47247036905: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-329-5943
Angle Bracket

123295943
222776-3000: RNCC: 3 | RNVC: 2

5 Sep 1992

5340-12-318-1613
Mounting Plate

123181613
54.2319.250.03: RNCC: 3 | RNVC: 2

16 Jun 1989

5340-12-010-2712

5340-12-351-5045
Angle Bracket

123515045
4616930112: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-311-3039
Mending Plate

123113039
302T21002: RNCC: 3 | RNVC: 2

14 Aug 1987

5340-12-319-9508
Double Angle Bracket

123199508
6100125-8410: RNCC: 2 | RNVC: 2
4207618010: RNCC: 3 | RNVC: 2

21 Nov 1989

5340-12-324-0666
Angle Bracket

123240666
272.346.470: RNCC: 3 | RNVC: 2
272.346 470: RNCC: 5 | RNVC: 9

18 Jan 1991

5340-12-155-2630
Spring Tension Clip

121552630
160-25585-12: RNCC: 3 | RNVC: 2
160-25585-12: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-149-7730
Nonmetallic Bumper

121497730
5800603-0138.000: RNCC: 2 | RNVC: 2
5800603-0138.000: RNCC: 3 | RNVC: 2
64035026: RNCC: 3 | RNVC: 2
2243024705: RNCC: 5 | RNVC: 2
5800603-0138.000: RNCC: 5 | RNVC: 2
22430 24705: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-374-5225
Rod End Clevis

123745225
L851M1805205: RNCC: 3 | RNVC: 2

22 Feb 2008

5340-12-352-8774
Spacing Threaded Standoff

123528774
8372371071: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-12-305-1382
Loop Clamp

123051382
4604920240: RNCC: 3 | RNVC: 9

1 Oct 1985

5340-12-363-5169
Double Angle Bracket

123635169
ATF5211062: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-383-0488
Mechanic Equipment Hardware Kit

123830488
2329069: RNCC: 3 | RNVC: 2

8 Sep 2010

5340-12-382-0898
Expansion Plug

123820898
4079975120: RNCC: 3 | RNVC: 2
4079975120: RNCC: 5 | RNVC: 2

6 May 2010

5340-12-389-8629
Block Clamp

123898629
A11A741122140A1: RNCC: 3 | RNVC: 2
A11A741122140A1: RNCC: 5 | RNVC: 2

6 Sep 2012

5340-12-092-3008

5340-12-358-7926
Webbing Strap

123587926
2500283-40000.13: RNCC: 2 | RNVC: 2
185061: RNCC: 3 | RNVC: 2
2500283-40000.13: RNCC: 5 | RNVC: 9

14 Nov 2002

5340-12-304-2832
Butt Hinge Leaf

123042832
161823301A: RNCC: 3 | RNVC: 9

5 Jul 1985

5340-12-316-4717
Mounting Bracket

123164717
54.0026.177.00: RNCC: 3 | RNVC: 2
54002617700: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-319-6538
Webbing Strap

123196538
731.42.046: RNCC: 3 | RNVC: 2
V731.42.046: RNCC: 5 | RNVC: 2

23 Oct 1989

5340-12-361-5441
Nonmetallic Bumper

123615441
230.1019: RNCC: 3 | RNVC: 2
230.1019.001: RNCC: 5 | RNVC: 2

16 Oct 2003

5340-12-327-3759
Runner

123273759
81671650035: RNCC: 2 | RNVC: 2
81671656035: RNCC: 3 | RNVC: 2

16 Jan 1992

5340-12-300-2336

5340-12-373-3562
Loop Clamp

123733562
L133M6705101: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-12-344-3848
Mounting Bracket

123443848
A-296713-015: RNCC: 3 | RNVC: 2
A296713-015: RNCC: 5 | RNVC: 2

22 Oct 1997

5340-12-172-2167
Door Hook

121722167
2504G100MM: RNCC: 3 | RNVC: 2

3 Jan 1978

5340-12-352-2958
Loop Clamp

123522958
5305289: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-333-2642
Mounting Bracket

123332642
LB-IV/2-40E01-35: RNCC: 2 | RNVC: 2

16 Nov 1993

5340-12-193-5538
Mending Plate

121935538
E4-2021960: RNCC: 2 | RNVC: 2
E4-2021960: RNCC: 3 | RNVC: 2
E4-2021960: RNCC: 5 | RNVC: 9
E4-2021960: RNCC: 5 | RNVC: 9

3 Aug 1982

5340-12-317-8195
Angle Bracket

123178195
2300223-063000.15.0: RNCC: 2 | RNVC: 2
2300223-063000.15.0: RNCC: 3 | RNVC: 2

17 May 1989

5340-12-320-6503
Loop Clamp

123206503
DIN3015-LH-0R-10-PP-W1: RNCC: 2 | RNVC: 2
HRL0D10PP STMBL: RNCC: 3 | RNVC: 2
RAPR18-010: RNCC: 3 | RNVC: 2
110PP-SIG-AF: RNCC: 3 | RNVC: 2
RAPR18-010: RNCC: 5 | RNVC: 2
DIN3015-LH0R-10PP-W1: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-301-9870
Angle Bracket

123019870
A-243799-025: RNCC: 3 | RNVC: 2
A243799-025: RNCC: 5 | RNVC: 2

24 Nov 1984

5340-12-312-5289
Angle Bracket

123125289
P-230229-303: RNCC: 3 | RNVC: 2
P230229-303: RNCC: 5 | RNVC: 2

14 Jan 1988

5340-12-316-4740
Case Corner

123164740
P-050757-003: RNCC: 3 | RNVC: 2
P050757-003: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-365-0362
Dust And Moisture Seal Protective Cap

123650362
6119880235: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-141-8545

5340-12-130-1073

5340-12-176-4597
Dust And Moisture Seal Protective Cap

121764597
M3T7: RNCC: 3 | RNVC: 2
M3T7: RNCC: 5 | RNVC: 9

29 Nov 1978

5340-12-135-6726

5340-12-317-2531
Mending Plate

123172531
CF 446 988: RNCC: 3 | RNVC: 2
CF 446 988: RNCC: 5 | RNVC: 2

21 Mar 1989

5340-12-342-8317
Retaining Strap

123428317
R23689: RNCC: 3 | RNVC: 2
R23689: RNCC: 5 | RNVC: 9

8 Apr 1997

5340-12-159-1576
Mending Plate

121591576
32102P1: RNCC: 3 | RNVC: 2
32102P1: RNCC: 5 | RNVC: 2
32102P1: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-316-6752
Dust And Moisture Seal Protective Cap

123166752
5800777-8640: RNCC: 2 | RNVC: 2
5800777-8640: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-350-7562
Angle Bracket

123507562
105-98506.07: RNCC: 3 | RNVC: 2

16 May 2000

5340-12-177-3538
Nonmetallic Bumper

121773538
3222850082: RNCC: 3 | RNVC: 2

29 Jan 1979

5340-12-376-0196
Door Button

123760196
1000-55: RNCC: 3 | RNVC: 2

1 Aug 2008

5340-12-324-1887
Mounting Bracket

123241887
5801408-22407.001: RNCC: 2 | RNVC: 2
5801408-22407.001: RNCC: 3 | RNVC: 2

25 Jan 1991

5340-12-318-7920
Mounting Bracket

123187920
5803667-14000: RNCC: 2 | RNVC: 2
7802004140: RNCC: 3 | RNVC: 2
5803667-14000: RNCC: 5 | RNVC: 2
78020 04140: RNCC: 5 | RNVC: 9

17 Aug 1989

5340-12-360-9515
Angle Bracket

123609515
2300457-120220.000: RNCC: 2 | RNVC: 2
2300457-120220.000: RNCC: 3 | RNVC: 2
2300457-120220.000: RNCC: 5 | RNVC: 9

29 Jul 2003

5340-12-305-1108
Double Angle Bracket

123051108
4900059-111130.003.0: RNCC: 3 | RNVC: 2

27 Sep 1985

5340-12-702-4605
Lock-Release Lever

127024605
VG95211-ML-127024605: RNCC: 2 | RNVC: 2
5.51.0603.0250.91: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-333-5039
Angle Bracket

123335039
706-152000-954-0: RNCC: 3 | RNVC: 2

27 Dec 1993

5340-12-701-7169
Angle Bracket

127017169
VG95211-ML-127017169: RNCC: 2 | RNVC: 2
5.12.7601.8150.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6234
Mounting Bracket

127016234
VG95211-ML-127016234: RNCC: 2 | RNVC: 2
5.12.7030.1410.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-4093
Loop Clamp

127014093
VG95211-ML-127014093: RNCC: 2 | RNVC: 2
5.12.5311.8340.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-8258
Access Cover

123618258
1960-010700.000.0: RNCC: 3 | RNVC: 2

21 Nov 2003

5340-12-306-6046
Butt Hinge Leaf

123066046
28.04.201-010.20: RNCC: 3 | RNVC: 2
284-201-010-200: RNCC: 5 | RNVC: 2

14 Mar 1986

5340-12-343-0964
Seal Retaining Plate

123430964
5080-219: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-393-7634
Angle Bracket

123937634
11.44152-0025: RNCC: 3 | RNVC: 2
11.44152-0025: RNCC: 5 | RNVC: 2

9 Oct 2013

5340-12-312-3436
Mending Plate

123123436
100000829: RNCC: 2 | RNVC: 2
100000829: RNCC: 3 | RNVC: 2

18 Dec 1987

5340-12-305-5188
Butt Hinge Leaf

123055188
81972010144: RNCC: 3 | RNVC: 2
81.97201.0144: RNCC: 5 | RNVC: 2

18 Nov 1985

5340-12-305-0672
Angle Bracket

123050672
0224 3913: RNCC: 3 | RNVC: 2
02243913ED0148-48: RNCC: 5 | RNVC: 2

24 Sep 1985

5340-12-318-6566
Retaining Strap

123186566
T2042034: RNCC: 3 | RNVC: 9

3 Aug 1989

5340-12-384-7669
Lock-Release Lever

123847669
0002652821: RNCC: 3 | RNVC: 2

28 Mar 2011

5340-12-318-0968
Retaining Strap

123180968
3512 712 68781: RNCC: 3 | RNVC: 2

12 Jun 1989

5340-12-341-3307
Caster Frame

123413307
WRYUG7489: RNCC: 3 | RNVC: 2
9999990180003: RNCC: 5 | RNVC: 2

24 Aug 1996

5340-12-351-2240
Mounting Bracket

123512240
9125.960.4: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-343-0899
Loop Clamp

123430899
4209 0023: RNCC: 3 | RNVC: 2
42090023: RNCC: 5 | RNVC: 2

28 Apr 1997

5340-12-162-5372
Rod End Clevis

121625372
G8X16M6GALZN8MT: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-191-9620
Eye Hook

121919620
4903920: RNCC: 3 | RNVC: 2
490.3920: RNCC: 5 | RNVC: 2

17 Mar 1982

5340-12-337-1394
Spacing Threaded Standoff

123371394
52.9352.102.45: RNCC: 3 | RNVC: 2

24 Jan 1995

5340-12-392-4311
Retaining Band

123924311
5624197083: RNCC: 3 | RNVC: 2
0979015: RNCC: 5 | RNVC: 2

6 Jun 2013

5340-12-011-4397

5340-12-011-5512

5340-12-176-6353
Detent Plunger

121766353
CF432283: RNCC: 3 | RNVC: 2
CF 432 283: RNCC: 5 | RNVC: 2
CF432283: RNCC: 5 | RNVC: 2
CF 432 283: RNCC: 5 | RNVC: 2
CF432283: RNCC: 5 | RNVC: 2
CF 432 283: RNCC: 5 | RNVC: 2

11 Dec 1978

5340-12-315-7242
Quick Release Plunger

123157242
1296 207 004: RNCC: 3 | RNVC: 2
0002601573: RNCC: 5 | RNVC: 2
000 260 15 73: RNCC: 5 | RNVC: 2
1296207004: RNCC: 5 | RNVC: 9

23 Nov 1988

5340-12-393-6511
Mounting Bracket

123936511
122W161680.007.0: RNCC: 2 | RNVC: 2
122W161680.007.0: RNCC: 3 | RNVC: 2

30 Sep 2013

5340-12-319-1465
Snap Hook

123191465
01215-2: RNCC: 3 | RNVC: 2
VE01215-2: RNCC: 3 | RNVC: 2

11 Sep 1989

5340-12-174-5525
Federkraft- Klipp

5340-12-383-9432
Metallic Solid Wheel

123839432
071 477 030 000: RNCC: 3 | RNVC: 2

27 Dec 2010

5340-12-344-4054
Angle Bracket

123444054
1821331013: RNCC: 3 | RNVC: 2

23 Oct 1997

5340-12-326-7893
Tee Hinge

123267893
1000227-3100: RNCC: 2 | RNVC: 2
1000227-3100: RNCC: 3 | RNVC: 2

25 Oct 1991

5340-12-350-7558
Double Angle Bracket

123507558
105-80052.66: RNCC: 3 | RNVC: 2

16 May 2000

5340-12-300-8920
Lock-Release Lever

123008920
6380009: RNCC: 3 | RNVC: 2
1360723: RNCC: 5 | RNVC: 2
1360723: RNCC: 5 | RNVC: 2

11 Sep 1984

5340-12-375-6467
Cushioning Pad

123756467
9000919A: RNCC: 3 | RNVC: 2

20 Jun 2008

5340-12-319-6225
Angle Bracket

123196225
503027: RNCC: 3 | RNVC: 2

19 Oct 1989

5340-12-312-1006
Nonmetallic Bumper

123121006
1213010097: RNCC: 3 | RNVC: 2

20 Nov 1987

5340-12-311-7878
Electrical-Mechanical Equipment Post

123117878
2300074-5524.02: RNCC: 2 | RNVC: 2
2300074-5524.02: RNCC: 5 | RNVC: 2
2300074-5524.02: RNCC: 5 | RNVC: 9

16 Oct 1987

5340-12-344-5870
Angle Bracket

123445870
78027 61055: RNCC: 2 | RNVC: 2
7802761055: RNCC: 3 | RNVC: 2
78027 61055: RNCC: 5 | RNVC: 9

12 Nov 1997

5340-12-352-2954
Loop Clamp

123522954
5205537: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-384-5815
Bumper

123845815
2656: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-12-143-4852

5340-12-320-1452
Angle Bracket

123201452
1543101: RNCC: 3 | RNVC: 2

12 Dec 1989

5340-12-359-9308
Mounting Bracket

123599308
T947M4005101: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-12-337-7694
Spring Tension Clip

123377694
3819880278: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-12-360-7673
Mounting Plate

123607673
553 187 00 40: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-359-1683
Swivel Caster

123591683
20230-408: RNCC: 3 | RNVC: 2

8 Jan 2003

5340-12-311-8447
Mending Plate

123118447
2300074-5531.01: RNCC: 2 | RNVC: 2
2300074-5531.01: RNCC: 3 | RNVC: 2
2300074-5531.01: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-363-7744
Installations Guard

123637744
81657012458: RNCC: 3 | RNVC: 2
00001242054: RNCC: 5 | RNVC: 2

23 Jul 2004

5340-12-040-6648

5340-12-168-1428
Friction Catch

121681428
6030056/57/4730002/3/4700059: RNCC: 3 | RNVC: 2
44170: RNCC: 5 | RNVC: 2
6030055: RNCC: 5 | RNVC: 2
972720008: RNCC: 5 | RNVC: 2
972720008: RNCC: 5 | RNVC: 9
972720008: RNCC: 5 | RNVC: 9

18 Feb 1977

5340-12-702-4551
Mounting Bracket

127024551
VG95211-ML-127024551: RNCC: 2 | RNVC: 2
5.51.0602.1780.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-198-8333
Lock-Release Lever

121988333
VG95136B3-35X25-TEIL 1: RNCC: 2 | RNVC: 2
VG95136B3-35X25-TEIL 1: RNCC: 3 | RNVC: 2
56105-1: RNCC: 3 | RNVC: 2
VG95136B3-35X25-TEIL 1: RNCC: 5 | RNVC: 9

1 Mar 1984

5340-12-305-0588
Double Angle Bracket

123050588
A-296712-447: RNCC: 3 | RNVC: 2
A296712-447: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-304-9631
Angle Bracket

123049631
P-296825-415: RNCC: 3 | RNVC: 2
P296825-415: RNCC: 5 | RNVC: 2

11 Sep 1985

5340-12-339-8373
Turnbuckle

123398373
S-20486: RNCC: 3 | RNVC: 2
S-12849-1/23: RNCC: 5 | RNVC: 2
S-12800-1/23: RNCC: 5 | RNVC: 2

23 Jan 1996

5340-12-311-4874
Quick Release Plunger

123114874
GN615-M4-KN: RNCC: 3 | RNVC: 2
KN M4 HWN 205 S: RNCC: 3 | RNVC: 2
RBN410.1-KN M4: RNCC: 3 | RNVC: 2
03010-04: RNCC: 3 | RNVC: 2
1604009: RNCC: 3 | RNVC: 2
C 3755 101 BX: RNCC: 5 | RNVC: 2
272.306 296: RNCC: 5 | RNVC: 2
NLM301-04: RNCC: 5 | RNVC: 9
NLM 301-04: RNCC: 5 | RNVC: 9
NLM3010-04: RNCC: 5 | RNVC: 9

9 Sep 1987

5340-12-172-8874
Clamping Catch

121728874
DIN3134-D95-G18X19BK-U: RNCC: 2 | RNVC: 2
DIN3134-D95-G18X19-BK-U: RNCC: 5 | RNVC: 2
BK95DIN3134R0H: RNCC: 5 | RNVC: 2

2 Mar 1978

5340-12-311-1305
Mending Plate

123111305
P-085017-004: RNCC: 3 | RNVC: 2
P085017-004: RNCC: 5 | RNVC: 2

29 Jul 1987

5340-12-310-2971
Rim Lock

123102971
1-67526: RNCC: 3 | RNVC: 2
329067: RNCC: 5 | RNVC: 2

6 May 1987

5340-12-370-5040
Manual Control Lever

123705040
SK778M6-236530.000.0: RNCC: 3 | RNVC: 2
461 750 01 76: RNCC: 5 | RNVC: 2
4617500176: RNCC: 5 | RNVC: 2

15 Nov 2006

5340-12-307-4145
Cremone Bolt

123074145
0.32.0743.0 L161: RNCC: 3 | RNVC: 2
201-9020 L161: RNCC: 3 | RNVC: 2
1049-S142-161: RNCC: 3 | RNVC: 2
FT6100129-164: RNCC: 5 | RNVC: 2
3757894EY3131-80: RNCC: 5 | RNVC: 2
1049-S142: RNCC: 5 | RNVC: 2
6100129-164: RNCC: 5 | RNVC: 2
3757894: RNCC: 5 | RNVC: 2

13 Jun 1986

5340-12-367-6864
Angle Bracket

123676864
SK861-850110.003.0: RNCC: 3 | RNVC: 2

26 Sep 2005

5340-12-199-1138
Mending Plate

121991138
65.7019.220.20-A001: RNCC: 3 | RNVC: 2
183663: RNCC: 5 | RNVC: 2

28 Mar 1984

5340-12-335-5344
Mounting Bracket

123355344
6020900341: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-12-131-5507

5340-12-178-5685
Support Hook

121785685
8732230241: RNCC: 3 | RNVC: 2

3 May 1979

5340-12-334-4691
Ladder Safety Shoe

123344691
40939: RNCC: 3 | RNVC: 2

13 May 1994

5340-12-318-8509
Mounting Bracket

123188509
M531016: RNCC: 3 | RNVC: 9
M531016: RNCC: 5 | RNVC: 2

22 Aug 1989

5340-12-369-1818
Nonmetallic Bumper

123691818
1770724003: RNCC: 3 | RNVC: 2

31 May 2006

5340-12-128-7022

5340-12-373-6356
Nut And Bolt Locking Plate

123736356
8719940130: RNCC: 2 | RNVC: 2
8719940130: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-12-381-3069
Loop Clamp

123813069
2300416-240100.020: RNCC: 2 | RNVC: 2
2300416-240100.020: RNCC: 3 | RNVC: 2

1 Feb 2010

5340-12-386-4099
Mounting Plate

123864099
01309384: RNCC: 3 | RNVC: 2

31 Aug 2011

5340-12-391-4096
Mounting Bracket

123914096
1103683: RNCC: 3 | RNVC: 2

11 Mar 2013

5340-12-377-8480
Access Cover

123778480
5552211: RNCC: 3 | RNVC: 2
(7001)123778480: RNCC: 5 | RNVC: 2
504357033: RNCC: 5 | RNVC: 2

16 Feb 2009

5340-12-377-2434
Loop Clamp

123772434
17316792: RNCC: 3 | RNVC: 2

18 Dec 2008

5340-12-167-3356
Nonmetallic Bumper

121673356
66.3523.126.04-A001: RNCC: 3 | RNVC: 2
66-3523-126-04A001: RNCC: 5 | RNVC: 9

14 Dec 1976

5340-12-166-3436
Loop Clamp

121663436
NX8: RNCC: 3 | RNVC: 2
276-101-020: RNCC: 5 | RNVC: 2
221-10080: RNCC: 5 | RNVC: 2
V22-498-8152-02: RNCC: 5 | RNVC: 2
V22-498-8152-32: RNCC: 5 | RNVC: 2
V22.498.8152-02: RNCC: 5 | RNVC: 2
TL830701/NX8: RNCC: 5 | RNVC: 2
276-101-020: RNCC: 5 | RNVC: 2
502080130: RNCC: 5 | RNVC: 9

31 Aug 1976

5340-12-374-9066
Loop Clamp

123749066
RSGU1.17/20W1SIL: RNCC: 3 | RNVC: 2
RSGU1.17/20 W1 SIL: RNCC: 3 | RNVC: 2
0918197017: RNCC: 5 | RNVC: 2
RSGU1.17/20-W1-SIL: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-12-343-0170
Nonmetallic Solid Wheel

123430170
1204-020: RNCC: 3 | RNVC: 2

22 Apr 1997

5340-12-150-8859
Resilient Mount

121508859
DIN95363-B30X20-NR55ST: RNCC: 2 | RNVC: 2
1.030.020.B 55SH: RNCC: 5 | RNVC: 2
500031-M8X20.NR55.ST: RNCC: 5 | RNVC: 2
30.20/200-55SHORE-20MM ZAPFEN: RNCC: 5 | RNVC: 2
5218065/11MN55: RNCC: 5 | RNVC: 2
2516289EE5056-55: RNCC: 5 | RNVC: 2
5218065-57N732: RNCC: 5 | RNVC: 2
5218065-14: RNCC: 5 | RNVC: 9
VG95363B30X20NR55ST: RNCC: 5 | RNVC: 9
VG95363-B30X20-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-165-7835
Bow Handle

121657835
25704-001150.00.0: RNCC: 2 | RNVC: 2
25704-001150.00.0: RNCC: 3 | RNVC: 2
25704-001150-00-0: RNCC: 5 | RNVC: 2
25704-001150.00.0: RNCC: 5 | RNVC: 9
25704-001150-00-0: RNCC: 5 | RNVC: 9

26 Jun 1976

5340-12-309-8149
Bail Handle

123098149
2-161/90X90 MM MIT 8MM LOCH: RNCC: 3 | RNVC: 2
216372: RNCC: 5 | RNVC: 2

6 Mar 1987

5340-12-332-5791
Helical Compression Spring Seat

123325791
B-22270-65-4: RNCC: 3 | RNVC: 2
B22270-65-4: RNCC: 5 | RNVC: 2

24 Aug 1993

5340-12-313-0188
Angle Bracket

123130188
P-086148-411: RNCC: 3 | RNVC: 2
P086148-411: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-149-1169
Loop Clamp

121491169
521L02039E1: RNCC: 3 | RNVC: 2
521L02039: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-185-4938
Loop Clamp

121854938
LN9491BK15: RNCC: 2 | RNVC: 2

11 Oct 1980

5340-12-027-4740

5340-12-170-3813
Dust And Moisture Seal Protective Cap

121703813
E20270: RNCC: 3 | RNVC: 2

8 Jul 1977

5340-12-025-9523

5340-12-383-2809
Plain Solid Disk

123832809
991048040000: RNCC: 3 | RNVC: 2

1 Oct 2010

Load More Results