What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 43 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 43 of 178

5340-12-355-5377
Access Cover

123555377
4221 309 016: RNCC: 3 | RNVC: 2
15008882: RNCC: 5 | RNVC: 2
4221309016: RNCC: 5 | RNVC: 9

22 Nov 2001

5340-12-357-8814
Mounting Bracket

123578814
2300042-255240.005: RNCC: 2 | RNVC: 2
2300042-255240.005: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-12-374-2891
Spacing Threaded Standoff

123742891
5307713: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-364-9616
Mounting Bracket

123649616
T311M1182101: RNCC: 3 | RNVC: 2

19 Nov 2004

5340-12-371-9643
Retaining Strap

123719643
8403479: RNCC: 3 | RNVC: 2

4 Jun 2007

5340-12-371-9725
Multiple Angle Bracket

123719725
S283M3008102: RNCC: 2 | RNVC: 2
S283M3008102: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-12-090-7819

5340-12-010-8451

5340-12-011-5634

5340-12-190-2710
Dust And Moisture Seal Protective Cap

121902710
RM6224: RNCC: 3 | RNVC: 2
RM 6224: RNCC: 5 | RNVC: 2
RM6224: RNCC: 5 | RNVC: 9
RM 6224: RNCC: 5 | RNVC: 9

16 Nov 1981

5340-12-180-0569
Tee Hinge

121800569
3817200037: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-356-7680
Mounting Bracket

123567680
89 2531: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-317-2001
Rod End Clevis

123172001
3604310267: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-308-2973
Pad Eye

123082973
2300223-186000.05.0: RNCC: 2 | RNVC: 2
2300223-186000.05.0: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-186-1431
Retaining Strap

121861431
51974010360: RNCC: 3 | RNVC: 2
6-38-102: RNCC: 5 | RNVC: 2
R0165: RNCC: 5 | RNVC: 2
51.97401-0360: RNCC: 5 | RNVC: 2

2 Dec 1980

5340-12-302-8447
Loop Clamp

123028447
DIN3016-2-H1-150X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-H1-150X20-W1-2: RNCC: 3 | RNVC: 2
SPGU150/20SKZ: RNCC: 3 | RNVC: 2
1519000150: RNCC: 5 | RNVC: 2
VG95931-K150X20-W1: RNCC: 5 | RNVC: 9
DIN3016-H1-150X20-W1-2: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-153-5440
Rod End Clevis

121535440
100355-162200.03: RNCC: 2 | RNVC: 2
100355-162200.03: RNCC: 3 | RNVC: 2
100355-162200-03: RNCC: 5 | RNVC: 2
656-12130-02: RNCC: 5 | RNVC: 9
100355-162200-03: RNCC: 5 | RNVC: 9
100355-162200-03: RNCC: 5 | RNVC: 9
100355-162200.03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-304-9624
Butt Hinge Leaf

123049624
P-296920-402: RNCC: 3 | RNVC: 2
P296920-402: RNCC: 5 | RNVC: 2

11 Sep 1985

5340-12-310-3687
Mending Plate

123103687
5801758-0700.08: RNCC: 2 | RNVC: 2
5801758-0700.08: RNCC: 3 | RNVC: 2

15 May 1987

5340-12-150-3353
Nonmetallic Bumper

121503353
C20170A82C143: RNCC: 3 | RNVC: 2
C20170-A82-C143: RNCC: 5 | RNVC: 2
TFS72-33143: RNCC: 5 | RNVC: 2
TGRPL82T143: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-151-7817
Butt Hinge Leaf

121517817
BD7001T445: RNCC: 3 | RNVC: 2
BD7001T445: RNCC: 3 | RNVC: 9
1292001-000160-445: RNCC: 5 | RNVC: 9
1292001-000160.445: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-334-6504
Turnbuckle Body

123346504
014-0754-024-013: RNCC: 3 | RNVC: 2
0140754024013: RNCC: 5 | RNVC: 2
014-0754-024-013: RNCC: 5 | RNVC: 2
0140754024013: RNCC: 5 | RNVC: 2
5000295437: RNCC: 5 | RNVC: 2

6 Jun 1994

5340-12-183-2787
Metal Runner

121832787
844-30-110000004-0B: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-12-354-4113
Nonmetallic Bumper

123544113
J53230643-002: RNCC: 3 | RNVC: 2

10 Jul 2001

5340-12-306-7352
Angle Bracket

123067352
5802017-441000.00: RNCC: 2 | RNVC: 2
5802017-441000.00: RNCC: 3 | RNVC: 2

25 Mar 1986

5340-12-199-2054
Buckle

121992054
DIN5292-16STVERZINKTMATT: RNCC: 2 | RNVC: 2
16DIN5292-ST,VERZINKTMATT: RNCC: 5 | RNVC: 2

4 Apr 1984

5340-12-386-3234
Access Cover

123863234
2500262-560100.003.0: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-327-7966
Loop Clamp

123277966
250147-350000.08.0: RNCC: 2 | RNVC: 2
250147-350000.08.0: RNCC: 3 | RNVC: 2

6 Mar 1992

5340-12-192-8625
Pad Eye

121928625
4606890714: RNCC: 3 | RNVC: 2
721 2 87 078 1: RNCC: 5 | RNVC: 9

1 Jun 1982

5340-12-389-3822
Mounting Plate

123893822
1.315-200300.00: RNCC: 2 | RNVC: 2
1.315-200300.00: RNCC: 5 | RNVC: 2

28 Jun 2012

5340-12-330-7811
Mounting Bracket

123307811
6600153-982180.000.0: RNCC: 2 | RNVC: 2
6600153-982180.000.0: RNCC: 3 | RNVC: 2

9 Feb 1993

5340-12-354-0083
Access Cover

123540083
1852-232050.000.0: RNCC: 3 | RNVC: 2

28 May 2001

5340-12-322-3275
Metal Runner

123223275
1-019-600-7: RNCC: 3 | RNVC: 2

10 Aug 1990

5340-12-392-3394
Spring Tension Clip

123923394
4100095-986130.002.0: RNCC: 2 | RNVC: 2
4100095-986130.002.0: RNCC: 3 | RNVC: 2

28 May 2013

5340-12-320-3823
Manual Control Lever

123203823
4900059-751470.001.0: RNCC: 3 | RNVC: 2
1228773: RNCC: 5 | RNVC: 2

9 Jan 1990

5340-12-417-5596

5340-12-373-7847
Loop Clamp

123737847
87655: RNCC: 3 | RNVC: 2

6 Dec 2007

5340-12-043-8093

5340-12-199-3619
Angle Bracket

121993619
3095041040: RNCC: 3 | RNVC: 2

14 Apr 1984

5340-12-347-9510
Mounting Bracket

123479510
54.0058.583.00: RNCC: 2 | RNVC: 2
54.0058.583.00: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-12-044-4537

5340-12-027-2335

5340-12-350-2875
Retaining Strap

123502875
982 124 44: RNCC: 3 | RNVC: 2

13 Mar 2000

5340-12-366-3192
Access Cover

123663192
943370147: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-12-044-4700

5340-12-094-1056

5340-12-374-7152
Mounting Plate

123747152
4618101511: RNCC: 3 | RNVC: 2

11 Mar 2008

5340-12-300-8418
Catch Strike

123008418
3819190275: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-388-4940
Spring Loaded Cylinder Fastener

123884940
GN 817-6-9-CK: RNCC: 3 | RNVC: 2
0749860: RNCC: 5 | RNVC: 2

27 Mar 2012

5340-12-352-7171
Angle Bracket

123527171
JN0145-03C00: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-198-1702
Loop Clamp

121981702
RANG7-106: RNCC: 3 | RNVC: 2
RANE7-106-GLATT: RNCC: 5 | RNVC: 2
95-75593: RNCC: 5 | RNVC: 2
RANE7-106-GLATT: RNCC: 5 | RNVC: 2
RANG7-106: RNCC: 5 | RNVC: 2

27 Dec 1983

5340-12-170-2503
Section Block Clamp

121702503
PAN4273-10: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-174-6695
Spring Tension Clip

121746695
5800828-145-005: RNCC: 3 | RNVC: 2
5800828-145.005: RNCC: 5 | RNVC: 2

19 Jul 1978

5340-12-317-1435
Access Door

123171435
400176283: RNCC: 2 | RNVC: 2
400176283: RNCC: 3 | RNVC: 2

14 Mar 1989

5340-12-043-7155

5340-12-170-2502
Retaining Strap

121702502
PAN4231EDEE6822: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-371-1786
Loop Clamp

123711786
3117427: RNCC: 3 | RNVC: 2
549157: RNCC: 5 | RNVC: 2

23 Feb 2007

5340-12-319-6669
Access Cover

123196669
5381501: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-12-319-6428
Permanent Magnet

123196428
503704: RNCC: 3 | RNVC: 2
503704: RNCC: 3 | RNVC: 2
H80 MIT GEWINDE M10 OHNE ZAPFEN: RNCC: 5 | RNVC: 9

20 Oct 1989

5340-12-349-7435
Retaining Strap

123497435
T290M2202257: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-094-4160

5340-12-334-5979
Strap Fastener Loop

123345979
0002-100821A01B: RNCC: 2 | RNVC: 2
0002-100821A01B: RNCC: 3 | RNVC: 2

27 May 1994

5340-12-311-8840
Access Cover

123118840
162306: RNCC: 2 | RNVC: 2
162306: RNCC: 3 | RNVC: 2
162306: RNCC: 5 | RNVC: 9

27 Oct 1987

5340-12-302-4228
Double Angle Bracket

123024228
3874030003: RNCC: 3 | RNVC: 2

28 Dec 1984

5340-12-179-6010
Resilient Mount

121796010
3092410213: RNCC: 3 | RNVC: 2

11 Jul 1979

5340-12-322-2659
Angle Bracket

123222659
100014336: RNCC: 3 | RNVC: 2

7 Aug 1990

5340-12-362-5316
Mounting Bracket

123625316
4632601860: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-355-1543
Angle Bracket

123551543
1603295-3500: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-12-371-3199
Retaining Strap

123713199
1215 1716: RNCC: 3 | RNVC: 2

14 Mar 2007

5340-12-313-4634
Electrical-Mechanical Equipment Post

123134634
2300279-9800.41: RNCC: 2 | RNVC: 2
2300279-9800.41: RNCC: 3 | RNVC: 2
2300279-9800.41: RNCC: 5 | RNVC: 9
9871391: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-357-8278
Access Cover

123578278
2300042-255816.000: RNCC: 2 | RNVC: 2
9947845: RNCC: 3 | RNVC: 2
2300042-255816.000: RNCC: 5 | RNVC: 2

30 Jul 2002

5340-12-372-0442
Pipe Hanger

123720442
6060017: RNCC: 3 | RNVC: 2
2638031: RNCC: 5 | RNVC: 2

13 Jun 2007

5340-12-044-0720

5340-12-134-8193

5340-12-149-1183
Retaining Strap

121491183
521L02035E1: RNCC: 3 | RNVC: 2
521L02035: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-169-3223
Dust And Moisture Seal Protective Plug

121693223
1200218: RNCC: 3 | RNVC: 2

4 May 1977

5340-12-378-0637
Dust And Moisture Seal Protective Plug

123780637
41042447: RNCC: 3 | RNVC: 2

10 Mar 2009

5340-12-394-0446
Mounting Plate

123940446
11.28044-1131: RNCC: 3 | RNVC: 2
11.28044-1131: RNCC: 5 | RNVC: 2

31 Oct 2013

5340-12-197-3356
Mending Plate

121973356
86-1559-201100.005.0: RNCC: 3 | RNVC: 2
86-1559-201100.005.0: RNCC: 5 | RNVC: 9

13 Oct 1983

5340-12-191-6648
Helical Compression Spring Seat

121916648
1733 285 000: RNCC: 3 | RNVC: 2
0003230867: RNCC: 5 | RNVC: 2
5220-37: RNCC: 5 | RNVC: 2
9405220378: RNCC: 5 | RNVC: 2
721 1 54 027 1: RNCC: 5 | RNVC: 9

23 Feb 1982

5340-12-333-9307
Resilient Mount

123339307
DIN95369-A6-3-CR-ST: RNCC: 2 | RNVC: 2
C3300: RNCC: 3 | RNVC: 2
0716111033: RNCC: 5 | RNVC: 2
151011-M16-CR.ST-60: RNCC: 5 | RNVC: 2
VG95369-A6-3-CR-ST: RNCC: 5 | RNVC: 9
C3300: RNCC: 5 | RNVC: 9
C3300-M16: RNCC: 5 | RNVC: 9

24 Feb 1994

5340-12-363-6218
Nut And Bolt Retainer

123636218
1873-086000.017.0: RNCC: 3 | RNVC: 2

9 Jul 2004

5340-12-301-7456
Expansion Plug

123017456
DIN470-10-ST-BL: RNCC: 2 | RNVC: 2
10DIN470: RNCC: 5 | RNVC: 2
10DIN470-ST-BL: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-322-6869
Mending Plate

123226869
1117579: RNCC: 3 | RNVC: 2
0134.038.30.00/230: RNCC: 5 | RNVC: 2
134.38.30/230: RNCC: 5 | RNVC: 2

12 Sep 1990

5340-12-351-1821
Angle Bracket

123511821
2300387-061950.000: RNCC: 2 | RNVC: 2
9907258: RNCC: 3 | RNVC: 2
2300387-061950.000: RNCC: 5 | RNVC: 9
9907258: RNCC: 5 | RNVC: 9

29 Jun 2000

5340-12-319-3567
Access Cover

123193567
2300232-182004.000.0: RNCC: 2 | RNVC: 2
2300232-182004.000.0: RNCC: 3 | RNVC: 2
2300232-182004.000.02: RNCC: 5 | RNVC: 9

26 Sep 1989

5340-12-363-6004
Block Clamp

123636004
HRBGS-2-GT-10-16-TPE: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-12-377-0567
Retaining Strap

123770567
2300399-060000.019.0: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-12-363-6231
Loop Clamp

123636231
DIN3015-LD-3R-20-PA-W5: RNCC: 2 | RNVC: 2

9 Jul 2004

5340-12-312-4689
Spring Tension Clip

123124689
12037: RNCC: 3 | RNVC: 2
01-1644: RNCC: 5 | RNVC: 2

11 Jan 1988

5340-12-337-4605
Clamping Catch

123374605
EM1396-01: RNCC: 3 | RNVC: 2
1032318N00: RNCC: 5 | RNVC: 2

7 Mar 1995

5340-12-331-4780
Protection Bellows

123314780
1272-01-10: RNCC: 3 | RNVC: 2
0501 310 062: RNCC: 3 | RNVC: 2
7701013685: RNCC: 5 | RNVC: 2
0734-320 024: RNCC: 5 | RNVC: 2
0002640696: RNCC: 5 | RNVC: 2
0501310062: RNCC: 5 | RNVC: 2

7 May 1993

5340-12-339-7075
Mounting Bracket

123397075
1361135-12120-06: RNCC: 3 | RNVC: 2

28 Dec 1995

5340-12-186-8638
Threaded End Tensioning Tie Rod

121868638
1390-5343-01: RNCC: 3 | RNVC: 2

13 Feb 1981

5340-12-393-6811
Access Door Hinge

123936811
11.07352-0006: RNCC: 3 | RNVC: 2
11.07352-0006: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-12-314-1463
Loop Clamp

123141463
6100127-3000.04: RNCC: 2 | RNVC: 2
1671312008: RNCC: 3 | RNVC: 2
6100127-3000.04: RNCC: 5 | RNVC: 2

11 Jun 1988

5340-12-328-9088
Handle Grip

123289088
2653-185140.00: RNCC: 2 | RNVC: 2
2653-185140.00: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-174-8262
Shimmy Damper

121748262
009-039-148: RNCC: 3 | RNVC: 2
12791-123000: RNCC: 5 | RNVC: 2
12791-123000: RNCC: 5 | RNVC: 9

7 Aug 1978

5340-12-356-5327
Angle Bracket

123565327
11.44086-0388: RNCC: 3 | RNVC: 2
11.44000-1953POS012: RNCC: 5 | RNVC: 2

8 Mar 2002

5340-12-702-2057
Mounting Plate

127022057
VG95211-ML-127022057: RNCC: 2 | RNVC: 2
30.7211.390: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-309-1424
Door Button

123091424
5801339-0201.016: RNCC: 3 | RNVC: 2

17 Dec 1986

5340-12-142-6446

5340-12-198-6305
Bow Handle

121986305
251857607: RNCC: 3 | RNVC: 2
81.97001.6058: RNCC: 5 | RNVC: 2
25185760701C: RNCC: 5 | RNVC: 2

14 Feb 1984

5340-12-181-3525
Bow Handle

121813525
3433028701: RNCC: 3 | RNVC: 2
34330 28701: RNCC: 5 | RNVC: 9

14 Nov 1979

5340-12-025-2846

5340-12-376-9660
Handwheel

123769660
539532E: RNCC: 3 | RNVC: 2

27 Nov 2008

5340-12-355-0375
Angle Bracket

123550375
5400049-622161.00: RNCC: 2 | RNVC: 2
5400049-622161.00: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-12-386-9594
Dust And Moisture Seal Protective Cap

123869594
907083: RNCC: 3 | RNVC: 2

20 Oct 2011

5340-12-369-1762
Leakproof Seal Plug

123691762
04128900: RNCC: 3 | RNVC: 2

31 May 2006

5340-12-394-0323
Mounting Bracket

123940323
L313M2848206: RNCC: 3 | RNVC: 2

30 Oct 2013

5340-12-369-4103
Retaining Strap

123694103
41578: RNCC: 3 | RNVC: 2

29 Jun 2006

5340-12-365-2740
Webbing Strap

123652740
4377900696: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-378-8185
Webbing Strap

123788185
A1Z10298450: RNCC: 3 | RNVC: 2

15 May 2009

5340-12-010-8499

5340-12-383-4627
Bail Handle

123834627
M-18-062.1: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-12-187-5066
Nonmetallic Bumper

121875066
5-612-0728: RNCC: 3 | RNVC: 2

10 Apr 1981

5340-12-148-4706
Loop Clamp

121484706
G10TAN15802-0: RNCC: 3 | RNVC: 2
G10TAN15802-3-1364-5: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-164-6377
Snap Hook

121646377
DIN5299-C60NI: RNCC: 2 | RNVC: 2
DIN5299-C60-VERNICKELT: RNCC: 3 | RNVC: 2
245-60X6 VERNICKELT: RNCC: 3 | RNVC: 9
C60DIN5299VERNICKELT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-355-9952
Mounting Bracket

123559952
5400051-141820.01: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-12-123-3170
Support Hook

121233170
5565-10-05-10: RNCC: 3 | RNVC: 2
5565-10-05.10: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-185-5520
Snap Hook

121855520
DIN5299-C100BK: RNCC: 2 | RNVC: 2
DIN5299-C100-ROH: RNCC: 3 | RNVC: 2
245-100X10 BLANK: RNCC: 3 | RNVC: 9
C100DIN5299BLANK: RNCC: 5 | RNVC: 2
0524 100 10: RNCC: 5 | RNVC: 2
DIN5299C100: RNCC: 5 | RNVC: 2
DIN5299C100BK: RNCC: 5 | RNVC: 2
245-100X10: RNCC: 5 | RNVC: 9
245 100X10 BLANK: RNCC: 5 | RNVC: 9

14 Oct 1980

5340-12-700-6125
Flush Lock

127006125
VG95211-ML-127006125: RNCC: 2 | RNVC: 2
5.12.4003.0010.00: RNCC: 3 | RNVC: 2
0501400366019: RNCC: 5 | RNVC: 2

29 Sep 1992

5340-12-352-4304
Access Cover

123524304
2500238-041000.003.0: RNCC: 2 | RNVC: 2
2500238-041000.003.0: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-330-4685
Retaining Strap

123304685
141394: RNCC: 3 | RNVC: 2
128-090.0105.3: RNCC: 5 | RNVC: 2

18 Dec 1992

5340-12-185-0016
Angle Bracket

121850016
F01-240140-03-0: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-12-364-9845
Mounting Bracket

123649845
T311M1180101: RNCC: 3 | RNVC: 2

20 Nov 2004

5340-12-351-2267
Dust And Moisture Seal Protective Plug

123512267
003606 0000: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-308-1386
Mending Plate

123081386
2859060260: RNCC: 3 | RNVC: 2

5 Sep 1986

5340-12-359-1520
Mounting Bracket

123591520
ZG5200G600: RNCC: 3 | RNVC: 2
ZG5200G600: RNCC: 5 | RNVC: 9
ZG5200G600ST: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-360-4758
Mounting Plate

123604758
01401089: RNCC: 3 | RNVC: 2
01401089: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-192-6699
Dust And Moisture Seal Protective Cap

121926699
15075-33: RNCC: 3 | RNVC: 2

12 May 1982

5340-12-316-9995
Mounting Bracket

123169995
2300279-4680.00: RNCC: 2 | RNVC: 2
2300279-4680.00: RNCC: 3 | RNVC: 2
2300279-4680.00: RNCC: 5 | RNVC: 9
9869891: RNCC: 5 | RNVC: 9

2 Mar 1989

5340-12-364-2467
Angle Bracket

123642467
4375400140: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-025-8944

5340-12-043-8526

5340-12-190-9236
Mending Plate

121909236
2331021002: RNCC: 3 | RNVC: 2
8691510042: RNCC: 5 | RNVC: 2

23 Dec 1981

5340-12-190-4048
Rod End Clevis

121904048
01TC60648T01: RNCC: 3 | RNVC: 2

25 Nov 1981

5340-12-300-2820
Support Hook

123002820
3149190083: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-311-9175
Resilient Mount

123119175
030131248000: RNCC: 3 | RNVC: 2
0002850035: RNCC: 5 | RNVC: 2

29 Oct 1987

5340-12-350-5586
Headless Straight Rod

123505586
10063-213100.01: RNCC: 3 | RNVC: 2
10063-213100.01: RNCC: 5 | RNVC: 9

14 Apr 2000

5340-12-374-1591
Loop Clamp

123741591
BSAE037: RNCC: 3 | RNVC: 2

24 Jan 2008

5340-12-308-7937
Dust And Moisture Seal Protective Plug

123087937
620U18B: RNCC: 3 | RNVC: 2
620001800: RNCC: 5 | RNVC: 9
GPN620,U18B: RNCC: 5 | RNVC: 9

18 Nov 1986

5340-12-378-7583
Snap-In Plain Standoff

123787583
061255: RNCC: 3 | RNVC: 2

11 May 2009

5340-12-168-1263
Dust And Moisture Seal Protective Plug

121681263
LN29843M12X1: RNCC: 2 | RNVC: 2

18 Feb 1977

5340-12-164-4551
Retaining Strap

121644551
4039950222: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-337-8146
Angle Bracket

123378146
461 625 05 12: RNCC: 3 | RNVC: 2
4616250512: RNCC: 5 | RNVC: 2
460 985 07 51: RNCC: 5 | RNVC: 9

18 Apr 1995

5340-12-388-3503
Loop Clamp

123883503
07067655: RNCC: 3 | RNVC: 2
07067655: RNCC: 5 | RNVC: 2

14 Mar 2012

5340-12-374-2565
Access Cover

123742565
L521M3032106: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-302-1855
Handle Grip

123021855
6202600040: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-180-8636
Mending Plate

121808636
81974850682: RNCC: 3 | RNVC: 2

8 Oct 1979

5340-12-373-3564
Access Cover

123733564
L524M2017102: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-12-360-0767
Mounting Bracket

123600767
9418200814: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-12-139-9515
Clamping Catch

121399515
5800193-0196-000: RNCC: 2 | RNVC: 2
58-0193-196-00: RNCC: 5 | RNVC: 2
5800193-0196-000: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-357-4009
Angle Bracket

123574009
J29120077-001: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-12-168-9226
Mending Plate

121689226
C22107A137C195: RNCC: 3 | RNVC: 2
C22107-A137-C195: RNCC: 5 | RNVC: 2

13 Apr 1977

5340-12-359-8478
Dust And Moisture Seal Protective Cap-Plug

123598478
600B728RAL3000: RNCC: 3 | RNVC: 2
GPN600B728RAL3000: RNCC: 5 | RNVC: 2
600B728ROT: RNCC: 5 | RNVC: 9
GPN600-B728RAL3000: RNCC: 5 | RNVC: 9

13 Mar 2003

5340-12-360-6867
Nonmetallic Bumper

123606867
SK-09345: RNCC: 3 | RNVC: 2

30 Jun 2003

5340-12-341-6416
Mounting Plate

123416416
0214 4035: RNCC: 3 | RNVC: 2
2144035: RNCC: 5 | RNVC: 9
2144035ED0148-15: RNCC: 5 | RNVC: 9
F300 0T 001 5525: RNCC: 6 | RNVC: 9

9 Oct 1996

5340-12-196-4433
Butt Hinge Leaf

121964433
25.5012.076-03: RNCC: 3 | RNVC: 2

7 Jul 1983

5340-12-305-0183
Webbing Strap

123050183
5802017-520000.01: RNCC: 2 | RNVC: 2
5802017-520000.01: RNCC: 3 | RNVC: 2
000-E4-20X2,0X300-PE-RAL6031: RNCC: 6 | RNVC: 9

17 Sep 1985

5340-12-384-5207
Mechanical Stop

123845207
F1.1189-30-10-10.00-58: RNCC: 3 | RNVC: 2

2 Mar 2011

5340-12-307-4151
Angle Bracket

123074151
790-52.61.114-02: RNCC: 3 | RNVC: 2

13 Jun 1986

5340-12-316-1779
Loop Clamp

123161779
DIN3016-1-D1-60X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-60X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.60/15-W1: RNCC: 3 | RNVC: 2
RSGU1.60/15: RNCC: 5 | RNVC: 2
RSGU1100.60/15: RNCC: 5 | RNVC: 2
DIN3016-D1-60X15W1-2: RNCC: 5 | RNVC: 9
DIN3016-D1-60X15-W1-2: RNCC: 5 | RNVC: 9
DIN3016-D1-60X15W1-2: RNCC: 5 | RNVC: 9
VG95931-D60X15-W1: RNCC: 5 | RNVC: 9

29 Dec 1988

5340-12-703-2068
Mounting Bracket

127032068
VG95211-ML-127032068: RNCC: 2 | RNVC: 2
5.12.5313.8220.00: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-329-5382
Mending Plate

123295382
2500229-198500.000.0: RNCC: 2 | RNVC: 2
2500229-198500.000.0: RNCC: 3 | RNVC: 2

28 Aug 1992

5340-12-171-2359
Spring Tension Clip

121712359
3611228007: RNCC: 3 | RNVC: 2
5800748-2760-002: RNCC: 5 | RNVC: 2
36112 28007: RNCC: 5 | RNVC: 9

21 Sep 1977

5340-12-354-8044
Mounting Bracket

123548044
J28630005-401: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-366-4446
Angle Bracket

123664446
383 0721-001: RNCC: 3 | RNVC: 2
383 0721-001: RNCC: 5 | RNVC: 2

26 Apr 2005

5340-12-356-9080
Retaining Strap

123569080
160-77870-12: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-12-178-8480
Strap Fastener Loop

121788480
23111-4618.01: RNCC: 2 | RNVC: 2
23111-4618.01: RNCC: 3 | RNVC: 2
23111-4618-01: RNCC: 5 | RNVC: 9
23111-4618.01: RNCC: 5 | RNVC: 9
23111-4618-01: RNCC: 5 | RNVC: 9

18 May 1979

5340-12-186-4927
Turnbuckle Body

121864927
1000025-262100.04: RNCC: 2 | RNVC: 2
1000025-262100.04: RNCC: 3 | RNVC: 2
1000025-262100-04: RNCC: 5 | RNVC: 2
1000025-262100-04: RNCC: 5 | RNVC: 9
1000025-262100.04: RNCC: 5 | RNVC: 9

7 Jan 1981

5340-12-386-0490
Mounting Plate

123860490
4145-2043: RNCC: 3 | RNVC: 2

3 Aug 2011

5340-12-175-2447
Dust And Moisture Seal Protective Cap

121752447
6.6208-0025.1: RNCC: 3 | RNVC: 2
6-6208-0025-1: RNCC: 5 | RNVC: 2

4 Sep 1978

5340-12-364-3897
Access Cover

123643897
105-072-703-1: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-365-2543
Mounting Plate

123652543
2500267-190000.065.0: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-12-365-1660
Nonmetallic Bumper

123651660
2500255-197301.002.0: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-350-0070
Flush Lock

123500070
81626806115: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-351-5187
Butt Hinge Leaf

123515187
120002402: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-382-9071
Permanent Magnet

123829071
46403: RNCC: 3 | RNVC: 2

23 Aug 2010

5340-12-168-2807
Loop Clamp

121682807
LN9491BM3: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-358-0741
Access Cover

123580741
2300388-250340.000: RNCC: 2 | RNVC: 2
2300388-250340.000: RNCC: 3 | RNVC: 2

10 Sep 2002

5340-12-315-8268
Mounting Bracket

123158268
54.0026.114.10: RNCC: 3 | RNVC: 2
54002611410: RNCC: 5 | RNVC: 2

30 Nov 1988

5340-12-178-1864
Buckle

121781864
T12919: RNCC: 3 | RNVC: 2
T12919: RNCC: 5 | RNVC: 9

26 Mar 1979

5340-12-316-2967
Mounting Bracket

123162967
5194149: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-366-3203
Access Cover

123663203
943370140: RNCC: 3 | RNVC: 2

8 Apr 2005

5340-12-136-5772

5340-12-194-9600
Nonmetallic Bumper

121949600
AG554020: RNCC: 3 | RNVC: 2
AG554020P1: RNCC: 5 | RNVC: 2

22 Dec 1982

5340-12-136-7132

5340-12-143-8369

5340-12-312-7282
Double Angle Bracket

123127282
3818201514: RNCC: 3 | RNVC: 2
381 820 15 14: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-328-9488
Protection Bellows

123289488
T08393: RNCC: 3 | RNVC: 2
1000830008: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-12-316-4196
Manual Control Handle

123164196
1980250: RNCC: 3 | RNVC: 2
980250: RNCC: 5 | RNVC: 9
980250: RNCC: 5 | RNVC: 9

17 Jan 1989

5340-12-318-0025
Double Angle Bracket

123180025
81974860141: RNCC: 3 | RNVC: 2
81.97486.0141: RNCC: 5 | RNVC: 2

2 Jun 1989

5340-12-197-5155
Barrel Bolt

121975155
2512-50MM-MMCH: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-12-393-3039
Webbing Strap

123933039
8605001332300: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-319-4605
Mending Plate

123194605
504547: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-300-9637
Nonmetallic Bumper

123009637
3873230385: RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-310-5321
Angle Bracket

123105321
78203 46431: RNCC: 2 | RNVC: 2
7820346431: RNCC: 3 | RNVC: 2
78203 46431: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-301-2070
Angle Bracket

123012070
A-295077-401: RNCC: 3 | RNVC: 2
A295077-401: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-314-6684
Angle Bracket

123146684
512214-4205.000: RNCC: 3 | RNVC: 2
512214-4205: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-158-6176
Loop Clamp

121586176
ZWSPGU8259.14-14/12SKZ: RNCC: 3 | RNVC: 2
51.97445-0004: RNCC: 5 | RNVC: 2
51974450004: RNCC: 5 | RNVC: 2
1338259014: RNCC: 5 | RNVC: 2
ZWSPGU14-14-12SKZ: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-300-9367
Pad Eye

123009367
1423-112.02(4): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-306-5134
Nut And Bolt Locking Plate

123065134
1865-020100.06.0: RNCC: 3 | RNVC: 9

6 Mar 1986

5340-12-349-9032
Double Angle Bracket

123499032
2500238-060108.000.0: RNCC: 2 | RNVC: 2
2500238-060108.000.0: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-12-317-4633
Mounting Bracket

123174633
P-145551-001: RNCC: 3 | RNVC: 2
P145551-001: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-12-358-2047
Spacing Threaded Standoff

123582047
2500262-191720.005.0: RNCC: 2 | RNVC: 2
2500262-191720.005.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-357-5540
Dust And Moisture Seal Protective Cap

123575540
200Z40X27: RNCC: 3 | RNVC: 2
200Z40X27: RNCC: 5 | RNVC: 2
GPN200Z40X27: RNCC: 5 | RNVC: 2
GPN200Z40X27: RNCC: 5 | RNVC: 9

1 Jul 2002

5340-12-339-0361
Spring Loaded Cylinder Fastener

123390361
13.09.500.00: RNCC: 3 | RNVC: 2
0009882864: RNCC: 5 | RNVC: 2

29 Sep 1995

5340-12-356-0611
Spring Tension Clip

123560611
1292670040: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-12-386-5812
Dust And Moisture Seal Protective Cover

123865812
0114 4499: RNCC: 3 | RNVC: 2
01144499: RNCC: 5 | RNVC: 2
CV178614: RNCC: 5 | RNVC: 2

13 Sep 2011

5340-12-387-8341
Rod Retainer Clip

123878341
7094058: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-12-316-0134
Mounting Bracket

123160134
3875211640: RNCC: 3 | RNVC: 2
387 521 16 40: RNCC: 5 | RNVC: 2

14 Dec 1988

5340-12-364-7794
Spacing Threaded Standoff

123647794
54.1105.197.02: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-365-5941
Mounting Bracket

123655941
54.1067.417.00: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-353-8629
Cushioning Pad

123538629
11357: RNCC: 3 | RNVC: 2
16332: RNCC: 5 | RNVC: 2

16 May 2001

5340-12-346-7537
Dust And Moisture Seal Protective Plug

123467537
0637 510 229: RNCC: 3 | RNVC: 2
0637510229: RNCC: 5 | RNVC: 9

7 Sep 1998

5340-12-043-9499

5340-12-385-9273
Angle Bracket

123859273
5320210040: RNCC: 3 | RNVC: 2

21 Jul 2011

5340-12-351-2120
Dust And Moisture Seal Protective Plug

123512120
24074: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-12-301-7699
Nonmetallic Bumper

123017699
4178333: RNCC: 3 | RNVC: 2
S12B.K03.03.00.000: RNCC: 5 | RNVC: 2

8 Nov 1984

5340-12-375-1886
Access Cover

123751886
L311M3816101: RNCC: 3 | RNVC: 2

30 Apr 2008

5340-12-163-7418
Loop Clamp

121637418
LN9491BM4: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-344-4877
Electronic Equipment Hardware Kit

123444877
78027 61023: RNCC: 2 | RNVC: 2
7802761023: RNCC: 3 | RNVC: 2
78027 61023: RNCC: 5 | RNVC: 9

3 Nov 1997

5340-12-385-6762
Double Angle Bracket

123856762
5240781241: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-12-173-5381
Loop Clamp

121735381
2405051EE0147-39: RNCC: 3 | RNVC: 2
0240 5051: RNCC: 3 | RNVC: 2
20456: RNCC: 5 | RNVC: 2
2405051: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-12-350-8231
Mounting Bracket

123508231
8382300040: RNCC: 3 | RNVC: 2
838 230 00 40: RNCC: 5 | RNVC: 2

25 May 2000

5340-12-350-7336
Mounting Bracket

123507336
13299701: RNCC: 3 | RNVC: 2

12 May 2000

5340-12-190-3291
Rod End Clevis

121903291
PH03.10: RNCC: 3 | RNVC: 2
PH0310: RNCC: 5 | RNVC: 2

23 Nov 1981

5340-12-091-3397

5340-12-152-9648
Schnappvers Zapfen

5340-12-011-5609

5340-12-151-6137
Haken Mit Auge

5340-12-151-8919
Sch Zapfenaufnahme

5340-12-387-5422
Electronic Equipment Hardware Kit

123875422
ZG4222A001: RNCC: 3 | RNVC: 2

6 Jan 2012

5340-12-321-6530
Mounting Bracket

123216530
0100 308705: RNCC: 3 | RNVC: 2
308705: RNCC: 5 | RNVC: 2

12 Jun 1990

5340-12-172-8949
Retaining Strap

121728949
06671500105: RNCC: 3 | RNVC: 2
15MAN217: RNCC: 5 | RNVC: 2

2 Mar 1978

5340-12-320-2902
Turnbuckle

123202902
4201 6212: RNCC: 3 | RNVC: 2

28 Dec 1989

5340-12-379-4981
Eye Hook

123794981
54: RNCC: 3 | RNVC: 2

30 Jul 2009

5340-12-377-3504
Loop Clamp

123773504
41231074: RNCC: 3 | RNVC: 2

12 Jan 2009

5340-12-040-6196

5340-12-194-3928
Angle Bracket

121943928
81155010403: RNCC: 3 | RNVC: 2
81.15501.0403: RNCC: 5 | RNVC: 2

28 Oct 1982

5340-12-356-9829
Mounting Bracket

123569829
2300002-184311.000: RNCC: 2 | RNVC: 2
2300002-184311.000: RNCC: 3 | RNVC: 2

23 Apr 2002

5340-12-347-2777
Handle Grip

123472777
DIN98-D36-ST-POLIERT: RNCC: 2 | RNVC: 2
EH2446.036: RNCC: 3 | RNVC: 2
D36DIN98-ST-POLIERT: RNCC: 5 | RNVC: 2
2446.036: RNCC: 5 | RNVC: 2

19 Nov 1998

5340-12-339-0613
Spring Tension Clip

123390613
SIZ890-9F621-05: RNCC: 3 | RNVC: 2
SIZ 890-F9621-05: RNCC: 5 | RNVC: 2

5 Oct 1995

5340-12-353-1525
Mounting Bracket

123531525
60751-872: RNCC: 3 | RNVC: 2
KB60751-872: RNCC: 5 | RNVC: 2

2 Feb 2001

5340-12-318-3251
Mounting Bracket

123183251
6600015-204.009: RNCC: 3 | RNVC: 2
6600015-204.009: RNCC: 5 | RNVC: 9

30 Jun 1989

5340-12-355-1523
Double Angle Bracket

123551523
J28130054-401: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-12-300-4506
Double Angle Bracket

123004506
E2-2004320: RNCC: 3 | RNVC: 2
E2-2004320: RNCC: 5 | RNVC: 9
E2-2004320: RNCC: 5 | RNVC: 9

2 Aug 1984

5340-12-197-9152
Dust And Moisture Seal Protective Cap

121979152
NO PRIMARY REF 12-197-9152: RNCC: 3 | RNVC: 2
0004291490: RNCC: 5 | RNVC: 2
1485500142: RNCC: 5 | RNVC: 2
5000810671: RNCC: 5 | RNVC: 2
1485500142: RNCC: 5 | RNVC: 2
81512310002: RNCC: 5 | RNVC: 2
1485500142: RNCC: 5 | RNVC: 9

1 Dec 1983

5340-12-378-5150
Helical Compression Spring Seat

123785150
E21254-01: RNCC: 3 | RNVC: 2

16 Apr 2009

5340-12-380-7735
Angle Bracket

123807735
601245-201710.01: RNCC: 2 | RNVC: 2
601245-201710.01: RNCC: 3 | RNVC: 2

27 Nov 2009

5340-12-700-8665
Retaining Band

127008665
VG95211-ML-127008665: RNCC: 2 | RNVC: 2
155N383: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-378-4022
Butt Hinge

123784022
1686-327000-01: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-12-194-1976
Mending Plate

121941976
490127-35000.15: RNCC: 3 | RNVC: 2
490127-35000-15: RNCC: 5 | RNVC: 2

11 Oct 1982

5340-12-157-7286
Retaining Strap

121577286
7828-009: RNCC: 3 | RNVC: 9
1092106-3900008: RNCC: 5 | RNVC: 9
7828009: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-158-4869
Loop Clamp

121584869
1202 5325: RNCC: 3 | RNVC: 2
12025325: RNCC: 5 | RNVC: 2
3.415.0.977.008.4: RNCC: 5 | RNVC: 2
3-415-0-977-008-4: RNCC: 5 | RNVC: 9
26-14-177-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-2224
Angle Bracket

123062224
1865-010900.02.0: RNCC: 3 | RNVC: 9

7 Feb 1986

5340-12-321-3693
Multiple Angle Bracket

123213693
7068-43000-008-2: RNCC: 3 | RNVC: 2

10 May 1990

5340-12-309-9131
Mending Plate

123099131
6600118-652000.02: RNCC: 3 | RNVC: 2

18 Mar 1987

5340-12-351-3177
Metallic Solid Wheel

123513177
3060-00-319100.54: RNCC: 3 | RNVC: 2

13 Jul 2000

5340-12-302-7512
Webbing Strap

123027512
DAN80-2-160: RNCC: 3 | RNVC: 2

29 Jan 1985

5340-12-320-1011
Manual Control Handle

123201011
C119-A37-C18: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-372-2932
Plain Solid Disk

123722932
D133-756.24E: RNCC: 3 | RNVC: 2

4 Jul 2007

5340-12-320-3036
Electrical-Mechanical Equipment Post

123203036
VG95148B5XM2X14-NRST: RNCC: 2 | RNVC: 2
VG95148B5XM2X14-NRST: RNCC: 3 | RNVC: 2
52681-002: RNCC: 3 | RNVC: 2
52 681-002: RNCC: 5 | RNVC: 9

29 Dec 1989

5340-12-359-7514
Dust And Moisture Seal Protective Cap

123597514
J92228477-001: RNCC: 3 | RNVC: 2

7 Mar 2003

5340-12-177-5140
Platte

121775140
2300002-187300.002: RNCC: 2 | RNVC: 2
2300002-187300.002: RNCC: 3 | RNVC: 2
2300002-187300-002: RNCC: 5 | RNVC: 9
2300002-187300.002: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-391-3554
Buckle

123913554
CRG-002: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-12-345-0884
Manual Control Lever

123450884
970908-0070: RNCC: 3 | RNVC: 2

28 Jan 1998

5340-12-004-2163

5340-12-004-0175

5340-12-365-3963
Mounting Bracket

123653963
207631: RNCC: 3 | RNVC: 2

28 Dec 2004

5340-12-331-2238
Access Cover

123312238
1703000072: RNCC: 3 | RNVC: 2

5 Apr 1993

5340-12-333-2382
Retaining Strap

123332382
M391220: RNCC: 3 | RNVC: 9

12 Nov 1993

5340-12-360-3246
Mounting Bracket

123603246
3513630100: RNCC: 3 | RNVC: 2
3513630100: RNCC: 5 | RNVC: 2

8 May 2003

5340-12-198-2000
Angle Bracket

121982000
6065601: RNCC: 3 | RNVC: 2

29 Dec 1983

5340-12-357-0417
Bow Handle

123570417
331327: RNCC: 2 | RNVC: 2
331327: RNCC: 3 | RNVC: 2

26 Apr 2002

5340-12-196-0510
Mending Plate

121960510
54.0028.813.00: RNCC: 3 | RNVC: 2

24 May 1983

5340-12-318-2777
Dust And Moisture Seal Protective Cap

123182777
K25,86SCHWARZ: RNCC: 3 | RNVC: 2
K25,86SW: RNCC: 5 | RNVC: 2

26 Jun 1989

5340-12-302-7822
Clamping Catch

123027822
23111-7279.00: RNCC: 2 | RNVC: 2
23111-7279.00: RNCC: 5 | RNVC: 2
23111-7279.00: RNCC: 5 | RNVC: 9
23111-7279.00: RNCC: 5 | RNVC: 9

29 Jan 1985

5340-12-178-6848
Dust And Moisture Seal Protective Cap

121786848
4069875045: RNCC: 3 | RNVC: 2
4069875045: RNCC: 5 | RNVC: 2

9 May 1979

5340-12-375-8459
Angle Bracket

123758459
4616900512: RNCC: 3 | RNVC: 2

10 Jul 2008

5340-12-356-1093
Mending Plate

123561093
028130206: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-341-5651
Butt Hinge Leaf

123415651
1852201: RNCC: 3 | RNVC: 2
EZ18522: RNCC: 5 | RNVC: 2

21 Sep 1996

5340-12-365-1231
Lock Key Set

123651231
4608930006: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-388-7595
Bumper

123887595
017240-032X020: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-319-5425
Access Cover

123195425
731.34.028: RNCC: 3 | RNVC: 2
V731.34.028: RNCC: 5 | RNVC: 2

11 Oct 1989

5340-12-355-7425
Multiple Angle Bracket

123557425
4618261214: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-12-308-5115
Lock-Release Lever

123085115
4502701: RNCC: 3 | RNVC: 2

17 Oct 1986

5340-12-360-1417
Dust And Moisture Seal Protective Cap

123601417
280ER8: RNCC: 3 | RNVC: 2
GPN280ER8: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-12-315-1894
Mounting Bracket

123151894
6212850140: RNCC: 3 | RNVC: 2
621 285 01 40: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-322-3478
Spring Tension Clip

123223478
0009883878: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-12-198-2813
Resilient Mount

121982813
1233520565: RNCC: 3 | RNVC: 2

10 Jan 1984

5340-12-327-5883
Helical Compression Spring Seat

123275883
81.61320.2417: RNCC: 3 | RNVC: 2

5 Feb 1992

5340-12-321-9290
Mounting Bracket

123219290
9000 1127: RNCC: 3 | RNVC: 2

10 Jul 1990

5340-12-370-3172
Manual Control Lever

123703172
1221 2390: RNCC: 3 | RNVC: 2

25 Oct 2006

5340-12-379-3905
Escutcheon Plate

123793905
211895: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-360-3510
Angle Bracket

123603510
0009317269: RNCC: 3 | RNVC: 2
0009317269: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-163-0800
Folding Stay

121630800
319141VERZINKT: RNCC: 3 | RNVC: 9

30 May 1969

5340-12-702-4211
Mounting Bracket

127024211
VG95211-ML-127024211: RNCC: 2 | RNVC: 2
5.12.7080.1450.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-371-4578
Mounting Plate

123714578
23302-142000.18: RNCC: 2 | RNVC: 2
23302-142000.18: RNCC: 3 | RNVC: 2
4-0018-559: RNCC: 5 | RNVC: 2
8406764: RNCC: 5 | RNVC: 2

2 Apr 2007

5340-12-339-7098
Mounting Plate

123397098
2500255-197110.000.0: RNCC: 2 | RNVC: 2
2500255-197110.000.0: RNCC: 3 | RNVC: 2

29 Dec 1995

5340-12-331-9985
Webbing Strap

123319985
01802-1-2000MM: RNCC: 3 | RNVC: 2
79036-2000: RNCC: 5 | RNVC: 2
DIN60060-1-25X2000-C1: RNCC: 5 | RNVC: 9

15 Jul 1993

5340-12-701-6248
Angle Bracket

127016248
VG95211-ML-127016248: RNCC: 2 | RNVC: 2
5.12.7040.1150.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-4617
Retaining Strap

121874617
2300109-060000.013.0: RNCC: 2 | RNVC: 2
2300109-060000.013.0: RNCC: 3 | RNVC: 2
2300109-060000.013.0: RNCC: 3 | RNVC: 2
2300109-060000.013.0: RNCC: 5 | RNVC: 9
2300109-060000-013-0: RNCC: 5 | RNVC: 9
2300109-060000-013-0: RNCC: 5 | RNVC: 9
2300109-060000-013-0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-335-3713
Hand Crank

123353713
073-394000-000-0: RNCC: 2 | RNVC: 2
073-394000-000-0: RNCC: 3 | RNVC: 2

15 Aug 1994

5340-12-352-6999
Loop Clamp

123526999
DIN3015-LA-L-2R-15-PP-W1: RNCC: 2 | RNVC: 2
RAPR5-215: RNCC: 3 | RNVC: 2
RAPR5-215: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-12-371-7637
Loop Clamp

123717637
DIN3016-1-D1-25X15-W1-2-EPDM: RNCC: 2 | RNVC: 2

14 May 2007

5340-12-342-6195
Handle Grip

123426195
0001-220500-000-0: RNCC: 2 | RNVC: 2
0001-220500-000-0: RNCC: 3 | RNVC: 2
0001-220500-000-0: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-337-8945
Mounting Bracket

123378945
1602-101400.000.0: RNCC: 2 | RNVC: 2
1602-101400.000.0: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-12-357-5412
Mounting Bracket

123575412
5581608: RNCC: 2 | RNVC: 2
5581608: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-339-3068
Nonmetallic Bumper

123393068
3964663: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-12-393-0504
Loop Clamp

123930504
15100021: RNCC: 3 | RNVC: 2
4043R: RNCC: 5 | RNVC: 2

2 Aug 2013

5340-12-374-5220
Manual Control Lever

123745220
L521M1819101: RNCC: 3 | RNVC: 2

22 Feb 2008

5340-12-020-7362

5340-12-123-2648
Retaining Strap

121232648
03341689: RNCC: 3 | RNVC: 2
K16790: RNCC: 5 | RNVC: 2
K16790: RNCC: 5 | RNVC: 2
3341689EF5052-81: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-179-5669
Mounting Plate

121795669
81513010025: RNCC: 3 | RNVC: 2
81.51301.0025: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-040-1013

5340-12-136-4473

5340-12-091-4446

5340-12-385-5014
Angle Bracket

123855014
9266554000: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-12-349-8844
Double Angle Bracket

123498844
54.1038.035.01: RNCC: 2 | RNVC: 2
54.1038.035.01: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-375-3007
Spacing Threaded Standoff

123753007
05.15.254: RNCC: 3 | RNVC: 2

19 May 2008

5340-12-390-5512
Access Door Hinge

123905512
7159538: RNCC: 3 | RNVC: 2

23 Nov 2012

5340-12-387-4677
Electronic Equipment Hardware Kit

123874677
5803988-601030.00: RNCC: 2 | RNVC: 2
5803988-601030.00: RNCC: 5 | RNVC: 2

21 Dec 2011

5340-12-387-8633
Mechanical Stop

123878633
7092962: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-357-6103
Nonmetallic Bumper

123576103
CBD45331P07: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-197-5146
Helical Compression Spring Seat

121975146
PYOT022: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-12-318-4726

5340-12-360-4111
Installations Guard

123604111
1864402500: RNCC: 3 | RNVC: 2
1864402500: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-348-8599
Mounting Plate

123488599
6454290640: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-12-193-3090
Escutcheon Plate

121933090
1156890080: RNCC: 3 | RNVC: 2

12 Jul 1982

5340-12-326-3342
Lock-Release Lever

123263342
2702037600: RNCC: 3 | RNVC: 2
27020-37600: RNCC: 5 | RNVC: 9

2 Sep 1991

5340-12-190-3190
Retaining Strap

121903190
3630: RNCC: 3 | RNVC: 2
C22195-Z1000-C33: RNCC: 3 | RNVC: 2
C22195Z1000C33: RNCC: 5 | RNVC: 9

19 Nov 1981

5340-12-300-2564
Angle Bracket

123002564
1300062-100000.03: RNCC: 2 | RNVC: 2
7835444: RNCC: 3 | RNVC: 2
7835-444: RNCC: 5 | RNVC: 2

19 Jul 1984

5340-12-181-4629
Dust And Moisture Seal Protective Cap

121814629
4H050-3705: RNCC: 3 | RNVC: 2

26 Nov 1979

5340-12-340-9122
Mounting Bracket

123409122
5802017-410000.00: RNCC: 2 | RNVC: 2
5802017-410000.00: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-12-301-2036
Angle Bracket

123012036
A-244870-757: RNCC: 3 | RNVC: 2
A244870-757: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-701-5920
Rod End Clevis

127015920
VG95211-ML-127015920: RNCC: 2 | RNVC: 2
5.12.6501.0892.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2130
Mounting Plate

127012130
VG95211-ML-127012130: RNCC: 2 | RNVC: 2
5.12.0605.0213.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-1561
Runner

123581561
2800-190000.014.0: RNCC: 2 | RNVC: 2
2800-190000.014.0: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-12-308-9385
Case Corner

123089385
P-244712-756: RNCC: 3 | RNVC: 2
P244712-756: RNCC: 5 | RNVC: 2

28 Nov 1986

5340-12-372-2666
Spring Loaded Cylinder Fastener

123722666
03090-4410: RNCC: 3 | RNVC: 2
NLM03090-4410: RNCC: 5 | RNVC: 2

3 Jul 2007

5340-12-702-9275
Mounting Plate

127029275
VG95211-ML-127029275: RNCC: 2 | RNVC: 2
5.12.7701.3291.98: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-309-4616
Door Button

123094616
2500075-197200.001.0: RNCC: 2 | RNVC: 2
2500075-197200.001.0: RNCC: 3 | RNVC: 2

27 Jan 1987

5340-12-702-5815
Angle Bracket

127025815
VG95211-ML-127025815: RNCC: 2 | RNVC: 2
5.51.8605.0100.09: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-4532
Loop Clamp

127014532
VG95211-ML-127014532: RNCC: 2 | RNVC: 2
5.12.5314.1000.35: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5644
Mounting Bracket

127025644
VG95211-ML-127025644: RNCC: 2 | RNVC: 2
5.51.7614.0050.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-5862
Angle Bracket

123655862
J29120131-005: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-302-9108
Electrical-Mechanical Equipment Post

123029108
29746-002: RNCC: 3 | RNVC: 2
29 746-002: RNCC: 5 | RNVC: 9

7 Feb 1985

5340-12-324-2740
Nonmetallic Bumper

123242740
C326-A25-C19: RNCC: 3 | RNVC: 2

1 Feb 1991

5340-12-366-2957
Mounting Plate

123662957
104174: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-375-1809
Access Cover

123751809
S252M3331101: RNCC: 3 | RNVC: 2

29 Apr 2008

5340-12-301-8441
Dust And Moisture Seal Protective Plug

123018441
1159870015: RNCC: 3 | RNVC: 2

13 Nov 1984

5340-12-044-2965

5340-12-043-2063

5340-12-323-1660
Spring Tension Clip

123231660
1262710594: RNCC: 3 | RNVC: 2

30 Oct 1990

5340-12-318-4296
Mounting Bracket

123184296
81066144003: RNCC: 3 | RNVC: 2
81.06614.4003: RNCC: 5 | RNVC: 2

13 Jul 1989

5340-12-362-5344
Spring Tension Clip

123625344
0009931915: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-348-0701
Section Block Clamp

123480701
1463305305: RNCC: 3 | RNVC: 2
(241)A424993192120: RNCC: 5 | RNVC: 2
93192120: RNCC: 5 | RNVC: 2

8 Apr 1999

5340-12-136-1681
Loop Clamp

121361681
81974010330: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-391-4446
Butt Hinge

123914446
I009893TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-359-0510
Manual Control Lever

123590510
0008353643: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-320-9087
Mounting Plate

123209087
0415 0154: RNCC: 3 | RNVC: 2
04150154ED0150-27: RNCC: 5 | RNVC: 2

5 Mar 1990

5340-12-179-2696
Retaining Strap

121792696
183253743: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-352-6108
Loop Clamp

123526108
211-15240: RNCC: 3 | RNVC: 2

30 Nov 2000

5340-12-173-0902
Hebel

121730902
2360-261421.00.0: RNCC: 2 | RNVC: 2
2360-261421-00-0: RNCC: 5 | RNVC: 2
2360-261421.00.0: RNCC: 5 | RNVC: 2
2360-261421.00.0: RNCC: 5 | RNVC: 2
2360-261421-00-0: RNCC: 5 | RNVC: 9
2360-261421.00.0: RNCC: 5 | RNVC: 9

20 Mar 1978

5340-12-300-9948
Hand Crank

123009948
H6-44-1-4KT-V1-27: RNCC: 3 | RNVC: 2

15 Sep 1984

5340-12-394-5464
Mounting Bracket

123945464
4052063134556: RNCC: 3 | RNVC: 2
I012932: RNCC: 5 | RNVC: 2

11 Dec 2013

5340-12-387-4843
Mounting Bracket

123874843
6625205344: RNCC: 3 | RNVC: 2

28 Dec 2011

5340-12-353-4452
Retaining Bail

123534452
2008-2600: RNCC: 3 | RNVC: 2

23 Mar 2001

5340-12-383-9677
Dust And Moisture Seal Protective Cover

123839677
2039.0340: RNCC: 3 | RNVC: 2

30 Dec 2010

5340-12-319-9250
Mounting Plate

123199250
3512 712 23110: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-12-375-4194
Angle Bracket

123754194
1521365: RNCC: 3 | RNVC: 2

30 May 2008

5340-12-149-1174
Mending Plate

121491174
521L02023: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-367-9426
Locking Stay

123679426
344464627: RNCC: 3 | RNVC: 2

9 Nov 2005

5340-12-166-0863
Buckle

121660863
T10726: RNCC: 3 | RNVC: 2
T10726: RNCC: 5 | RNVC: 9

29 Jul 1976

5340-12-318-4747
Shimmy Damper

123184747
047627: RNCC: 3 | RNVC: 2
1873903M1: RNCC: 5 | RNVC: 2
1873903M93: RNCC: 5 | RNVC: 9

18 Jul 1989

5340-12-129-2848
Vorhaenge- Schlosz

5340-12-163-9378
Verbindungs Platte

5340-12-163-9580
Verbindungs Platte

5340-12-358-0654
Loop Clamp

123580654
2300042-255626.000: RNCC: 2 | RNVC: 2
2300042-255626.000: RNCC: 3 | RNVC: 2

9 Sep 2002

5340-12-123-0061

5340-12-334-0950
Angle Bracket

123340950
4043000336: RNCC: 3 | RNVC: 2

21 Mar 1994

5340-12-330-0982
Mounting Bracket

123300982
537172-8230.000: RNCC: 2 | RNVC: 2
537172-8230.000: RNCC: 3 | RNVC: 2
537172-8230.000: RNCC: 5 | RNVC: 9

3 Nov 1992

5340-12-180-3474
Mending Plate

121803474
4730003: RNCC: 3 | RNVC: 2
030590: RNCC: 5 | RNVC: 2
39356: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-310-4156
Nonmetallic Bumper

123104156
DIN95364-F30X30-NR55ST-M6X12: RNCC: 2 | RNVC: 2
1.30.30.4F.55NR/ST-M6X12: RNCC: 5 | RNVC: 2
811.040.030.030.06X12.NR55.ST: RNCC: 5 | RNVC: 2
81140-30X30-M6X12.NR55.ST: RNCC: 5 | RNVC: 2
91003-900138: RNCC: 5 | RNVC: 2
DP3030: RNCC: 5 | RNVC: 2
91003-900138: RNCC: 5 | RNVC: 2
VG95364-F30X30-M6X12-NR55ST: RNCC: 5 | RNVC: 9
VG95364-F30X30-NR55ST-M6X12: RNCC: 5 | RNVC: 9

19 May 1987

5340-12-196-9454
Angle Bracket

121969454
4900059-111210.001.0: RNCC: 3 | RNVC: 2
4900059-111210-001-0: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-148-2964
Helical Compression Spring Seat

121482964
25704-190620.20.0: RNCC: 2 | RNVC: 2
25704-190620.20.0: RNCC: 3 | RNVC: 2
25704-190620.20.0: RNCC: 3 | RNVC: 2
25704-190620-20-0: RNCC: 5 | RNVC: 2
25704-190620-20-0: RNCC: 5 | RNVC: 2
25704-190620-20-0: RNCC: 5 | RNVC: 9
25704-190620.20.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-145-4349
Retaining Band

121454349
VG75073-B77,5: RNCC: 2 | RNVC: 2
VG75073-B77,5: RNCC: 3 | RNVC: 2
6020171: RNCC: 3 | RNVC: 2
269046060204: RNCC: 5 | RNVC: 2
C000771: RNCC: 5 | RNVC: 2
999852077200: RNCC: 5 | RNVC: 2
B77-5VDA75073: RNCC: 5 | RNVC: 2
B77-5VG75073: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-339-2909
Retaining Strap

123392909
2300223-208940.02.0: RNCC: 2 | RNVC: 2
2300223-208940.02.0: RNCC: 3 | RNVC: 2
2300223-208940 02 0: RNCC: 5 | RNVC: 2
C174085607: RNCC: 5 | RNVC: 2

6 Nov 1995

5340-12-157-7278
Retaining Strap

121577278
7823-471: RNCC: 3 | RNVC: 9
063471-3: RNCC: 5 | RNVC: 9
1092106-3701005: RNCC: 5 | RNVC: 9
7823471: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-344-4890
Mounting Bracket

123444890
2500255-192600.000.0: RNCC: 2 | RNVC: 2
2500255-192600.000.0: RNCC: 3 | RNVC: 2

3 Nov 1997

5340-12-384-5476
Shimmy Damper

123845476
000594: RNCC: 3 | RNVC: 2
07-076-300-0001-00-0: RNCC: 5 | RNVC: 2

4 Mar 2011

5340-12-161-4284
Rod End Clevis

121614284
100332-16000.34: RNCC: 2 | RNVC: 2
100332-16000-34: RNCC: 5 | RNVC: 2
100332-16000.34: RNCC: 5 | RNVC: 2
100332-16000-34: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-177-6978
Flush Bolt

121776978
1000086-101221.01: RNCC: 2 | RNVC: 2
1000086-101221.01: RNCC: 3 | RNVC: 2
1000086-101221.01: RNCC: 5 | RNVC: 9
1000086-101221-01: RNCC: 5 | RNVC: 9
1000086-101221-01: RNCC: 5 | RNVC: 9
1000086-101221-01: RNCC: 5 | RNVC: 9

14 Feb 1979

5340-12-193-8180
Lock-Release Lever

121938180
C22136-A1000-C829: RNCC: 3 | RNVC: 2
C22136A1000C829: RNCC: 5 | RNVC: 2

2 Sep 1982

5340-12-391-8958
Kugelgel Spannfusz

123918958
GN343.2-60-M20-98-OS: RNCC: 3 | RNVC: 2
BM050390: RNCC: 5 | RNVC: 2

17 Apr 2013

5340-12-328-2419
Mounting Plate

123282419
2300232-208330.000.0: RNCC: 2 | RNVC: 2
2300232-208330.000.0: RNCC: 3 | RNVC: 2

28 Apr 1992

5340-12-348-9872
Access Cover

123489872
245/7346-49-00-20: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-176-3703
Detent Plunger

121763703
5800828-1342-005: RNCC: 3 | RNVC: 2
5800828-1342.005: RNCC: 5 | RNVC: 2

27 Nov 1978

5340-12-701-9599
Resilient Mount

127019599
VG95211-ML-127019599: RNCC: 2 | RNVC: 2
AP-3-90,0-2 GOST 11679.1-76: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-322-1422
Access Cover

123221422
5801114-5.006: RNCC: 2 | RNVC: 2
5801114-5.006: RNCC: 3 | RNVC: 2

27 Jul 1990

5340-12-344-4892
Double Angle Bracket

123444892
2500255-198400.002.0: RNCC: 2 | RNVC: 2
2500255-198400.002.0: RNCC: 3 | RNVC: 2

3 Nov 1997

5340-12-159-9034
Retaining Strap

121599034
1044141: RNCC: 3 | RNVC: 2
B8SHN78550: RNCC: 5 | RNVC: 2
H78550-B80: RNCC: 5 | RNVC: 2
WN7855B8VERNICKELT: RNCC: 5 | RNVC: 9
H78550B80: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-0582
Shimmy Damper

123120582
049182: RNCC: 3 | RNVC: 2
03-06-060-101-0050: RNCC: 5 | RNVC: 2
03-06-060-101-0050N: RNCC: 5 | RNVC: 2
03-06-060-601/0050: RNCC: 5 | RNVC: 2
03-06-060-601-050: RNCC: 5 | RNVC: 9

13 Nov 1987

5340-12-361-7677
Mounting Bracket

123617677
2500266-190007.000.0: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-12-393-8210
Spring Loaded Cylinder Fastener

123938210
GN607-8-AK-NI: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-12-344-0023
Mounting Plate

123440023
35627060: RNCC: 3 | RNVC: 2
C41107-A467-C327: RNCC: 3 | RNVC: 2
C41107A467C327: RNCC: 5 | RNVC: 2

27 Aug 1997

5340-12-300-8524
Electrical-Mechanical Equipment Post

123008524
1300062-151100.01: RNCC: 2 | RNVC: 2
7835503: RNCC: 3 | RNVC: 2
7835-503: RNCC: 5 | RNVC: 2

5 Sep 1984

5340-12-381-3413
Spring Tension Clip

123813413
02137: RNCC: 3 | RNVC: 2

3 Feb 2010

5340-12-354-8259
Manual Control Lever

123548259
01302729: RNCC: 2 | RNVC: 2
01302729: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-375-4519
Mounting Bracket

123754519
1520764: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-12-324-0622
Protection Bellows

123240622
2012950983: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-12-324-7665
Nonmetallic Bumper

123247665
2500171-452000.04: RNCC: 2 | RNVC: 2
2500171-452000.04: RNCC: 3 | RNVC: 2
2500171-452000.04: RNCC: 3 | RNVC: 2

22 Mar 1991

5340-12-011-5222

5340-12-374-2486
Mounting Plate

123742486
L521M1059202: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-040-2031

5340-12-365-5337
Retaining Strap

123655337
M00486.01: RNCC: 3 | RNVC: 2

12 Jan 2005

5340-12-182-3132
Manual Control Handle

121823132
5801215-885: RNCC: 3 | RNVC: 2

25 Jan 1980

5340-12-358-5285
Retaining Band

123585285
3834700140: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-355-7013
Retaining Strap

123557013
15307001: RNCC: 3 | RNVC: 2
15307001: RNCC: 5 | RNVC: 2

6 Dec 2001

5340-12-318-1638
Handle Grip

123181638
021.451087: RNCC: 3 | RNVC: 2

16 Jun 1989

5340-12-367-6629
Swivel Caster

123676629
9680ITP200P63: RNCC: 3 | RNVC: 2
1497704: RNCC: 5 | RNVC: 2

21 Sep 2005

5340-12-360-1528
Mounting Bracket

123601528
9424741240: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-339-5604
Mending Plate

123395604
81974870437: RNCC: 3 | RNVC: 2
81.97487.0437: RNCC: 5 | RNVC: 2

6 Dec 1995

5340-12-360-7141
Access Cover

123607141
1H0 837 993B B41: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-368-7064
Caster Wheel

123687064
33C050BZ: RNCC: 3 | RNVC: 2

7 Apr 2006

5340-12-301-7822
Lock-Release Lever

123017822
4178921: RNCC: 3 | RNVC: 2

9 Nov 1984

5340-12-381-6678
Retaining Clip

123816678
310320044H: RNCC: 3 | RNVC: 2

16 Mar 2010

5340-12-348-7771
Verbindungsstueck

123487771
4655201: RNCC: 2 | RNVC: 2
4655201: RNCC: 3 | RNVC: 2

18 Aug 1999

5340-12-367-1919
Butt Hinge

123671919
S252M3168210: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-12-322-9119
Dust And Moisture Seal Protective Cap-Plug

123229119
20149: RNCC: 3 | RNVC: 2
TL-4-355: RNCC: 5 | RNVC: 2
1359173: RNCC: 5 | RNVC: 2
05620: RNCC: 5 | RNVC: 2
3811116: RNCC: 5 | RNVC: 2
1359173: RNCC: 5 | RNVC: 2

5 Oct 1990

5340-12-318-7191
Angle Bracket

123187191
2300223-063900.01.0: RNCC: 2 | RNVC: 2
2300223-063900.01.0: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-12-317-8445
Angle Bracket

123178445
P-296883-309: RNCC: 3 | RNVC: 2
P296883-309: RNCC: 5 | RNVC: 2

19 May 1989

5340-12-156-5446
Webbing Strap

121565446
42161-10220-6: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-701-7081
Mounting Bracket

127017081
VG95211-ML-127017081: RNCC: 2 | RNVC: 2
5.12.7601.1540.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-382-6337
Dust And Moisture Seal Protective Cap

123826337
SZ10-6-SW002C1: RNCC: 3 | RNVC: 2
4095530043: RNCC: 5 | RNVC: 2

19 Jul 2010

5340-12-186-6958
Support Hook

121866958
25704-192520.11.0: RNCC: 2 | RNVC: 2
25704-192520.11.0: RNCC: 3 | RNVC: 2
25704-192520-11-0: RNCC: 5 | RNVC: 2
25704-192520.11.0: RNCC: 5 | RNVC: 9
25704-192520-11-0: RNCC: 5 | RNVC: 9

28 Jan 1981

5340-12-339-1334
Spring Tension Clip

123391334
1000192-03 2 04100.22: RNCC: 2 | RNVC: 2
1000192-03 2 04100.22: RNCC: 3 | RNVC: 2
1000192-03204100.22: RNCC: 5 | RNVC: 9
1000192-03 2 04100.22: RNCC: 5 | RNVC: 9

16 Oct 1995

5340-12-701-6457
Loop Clamp

127016457
VG95211-ML-127016457: RNCC: 2 | RNVC: 2
5.12.7204.0922.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-383-7756
Loop Clamp

123837756
DIN3016-1-D1-51X25-W1-2-NBR: RNCC: 2 | RNVC: 2

7 Dec 2010

5340-12-389-9125
Rod End Clevis

123899125
2300560-186200.001.0: RNCC: 2 | RNVC: 2
2300560-186200.001.0: RNCC: 3 | RNVC: 2

12 Sep 2012

5340-12-701-5686
Loop Clamp

127015686
VG95211-ML-127015686: RNCC: 2 | RNVC: 2
5.12.6149.0020.15: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-150-9350
Compression Cup

121509350
H85-1-88NBR/101: RNCC: 3 | RNVC: 2
H85-1-88NBR/101: RNCC: 5 | RNVC: 2
H85-1: RNCC: 5 | RNVC: 2
H85-1-88NBR101: RNCC: 5 | RNVC: 2
H85-1-14PA101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-2963
Permanent Magnet

121962963
106002: RNCC: 3 | RNVC: 2
G02 T: RNCC: 3 | RNVC: 2
77.272-106002: RNCC: 5 | RNVC: 2
16/2: RNCC: 5 | RNVC: 2
0706D101856/1-4: RNCC: 5 | RNVC: 2
106002-8MEX12: RNCC: 5 | RNVC: 2
8H6X12: RNCC: 5 | RNVC: 2
272-2416POS2: RNCC: 5 | RNVC: 2

23 Jun 1983

5340-12-338-7307
Handle Grip

123387307
84180/6901-02: RNCC: 3 | RNVC: 2
84180/6901-02: RNCC: 5 | RNVC: 9

21 Aug 1995

5340-12-146-9402
Retaining Clip

121469402
25704-280910.04.0: RNCC: 2 | RNVC: 2
25704-280910.04.0: RNCC: 3 | RNVC: 2
25704-280910-04-0: RNCC: 5 | RNVC: 2
25704-280910-04-0: RNCC: 5 | RNVC: 9
25704-280910.04.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-300-3142
Dust And Moisture Seal Protective Plug

123003142
105-212-9: RNCC: 3 | RNVC: 2
0009979386: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-169-8044
Mending Plate

121698044
M239237-1: RNCC: 3 | RNVC: 9
M239237-1: RNCC: 5 | RNVC: 2

10 Jun 1977

5340-12-369-1736
Expansion Shield

123691736
305 140-1: RNCC: 3 | RNVC: 2

31 May 2006

5340-12-390-2531
Dust And Moisture Seal Protective Cap-Plug

123902531
BPT2040E0,8-3,0: RNCC: 3 | RNVC: 2
SPP4360021: RNCC: 5 | RNVC: 2

22 Oct 2012

5340-12-149-1095
Angle Bracket

121491095
121L21007: RNCC: 3 | RNVC: 2
8201877346: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-342-3909
Blank Panel

123423909
554685: RNCC: 3 | RNVC: 2
67.6081.000.04-A001: RNCC: 5 | RNVC: 2

31 Jan 1997

5340-12-339-0211
Webbing Strap

123390211
0008660371: RNCC: 3 | RNVC: 2
0008660371: RNCC: 5 | RNVC: 2
10.41.091.02-230MM: RNCC: 5 | RNVC: 2

27 Sep 1995

5340-12-386-0475
Mounting Bracket

123860475
T622M1303121: RNCC: 3 | RNVC: 2

3 Aug 2011

5340-12-317-3748
Bow Handle

123173748
3954101: RNCC: 3 | RNVC: 2

4 Apr 1989

5340-12-360-2102
Lock Key

123602102
81971186003: RNCC: 3 | RNVC: 2
81626823007: RNCC: 5 | RNVC: 2

17 Apr 2003

5340-12-300-2044
Bow Handle

123002044
CF 802 234 AE: RNCC: 3 | RNVC: 2
CF 802 234 AE: RNCC: 5 | RNVC: 2

14 Jul 1984

5340-12-320-4914
Mounting Bracket

123204914
0594901: RNCC: 3 | RNVC: 2
GZ05949: RNCC: 5 | RNVC: 2

19 Jan 1990

5340-12-197-0376
Dust And Moisture Seal Protective Plug

121970376
WFGST6: RNCC: 3 | RNVC: 2
WFGST6: RNCC: 3 | RNVC: 2

13 Sep 1983

5340-12-334-5408
Webbing Strap

123345408
42311212: RNCC: 3 | RNVC: 2
42311212ED5508-49: RNCC: 5 | RNVC: 2
42311212: RNCC: 5 | RNVC: 2

20 May 1994

5340-12-367-8351
Mounting Plate

123678351
5560961540: RNCC: 3 | RNVC: 2

20 Oct 2005

5340-12-300-4025
Double Angle Bracket

123004025
4258310114: RNCC: 3 | RNVC: 2
A4258310114: RNCC: 5 | RNVC: 2

28 Jul 1984

5340-12-382-4850
Dust And Moisture Seal Protective Cap-Plug

123824850
9219673: RNCC: 3 | RNVC: 2

28 Jun 2010

5340-12-373-5359
Retaining Strap

123735359
254 0261-801: RNCC: 3 | RNVC: 2
254 0261-801: RNCC: 5 | RNVC: 2

13 Nov 2007

5340-12-308-4790
Support Hook

123084790
3522231541: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-12-300-7394
Retaining Band

123007394
SA7509C: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-345-2751
Mounting Bracket

123452751
52.9618.000.33: RNCC: 3 | RNVC: 2

24 Feb 1998

5340-12-390-0370
Strap Fastener Loop

123900370
0236930: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-373-6357
Nonmetallic Bumper

123736357
X00008980: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-12-378-4421
Clamping Catch

123784421
65000338: RNCC: 3 | RNVC: 2

7 Apr 2009

5340-12-392-7202
Angle Bracket

123927202
L214M1093101: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-12-152-7712
Buckle

121527712
A25VG4857: RNCC: 2 | RNVC: 2
X00172: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-373-3594
Rod End Clevis

123733594
L134M3201216: RNCC: 3 | RNVC: 2

25 Oct 2007

5340-12-182-7378
Mounting Bracket

121827378
2842801: RNCC: 3 | RNVC: 2

22 Feb 1980

5340-12-092-0964

5340-12-392-8711
Mounting Bracket

123928711
L134M2803206: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-12-010-8489

5340-12-131-3297

5340-12-337-8039
Access Cover

123378039
M97206: RNCC: 3 | RNVC: 2

13 Apr 1995

5340-12-323-8391
Electrical-Mechanical Equipment Post

123238391
432768: RNCC: 2 | RNVC: 2
432768: RNCC: 3 | RNVC: 2
432768: RNCC: 5 | RNVC: 2
432768: RNCC: 5 | RNVC: 9

21 Dec 1990

5340-12-365-9077
Plain Solid Disk

123659077
05151700: RNCC: 3 | RNVC: 2

17 Feb 2005

5340-12-321-9337
Helical Compression Spring Seat

123219337
1480551074: RNCC: 3 | RNVC: 2
1480551074: RNCC: 5 | RNVC: 2
1480551074: RNCC: 5 | RNVC: 9

10 Jul 1990

5340-12-196-9984
Webbing Strap

121969984
4900059-211410.000.0: RNCC: 2 | RNVC: 2
01151-2-SCHLAUFE-FE290MM-LE440MM: RNCC: 3 | RNVC: 2
4900059-211410.000.0: RNCC: 3 | RNVC: 2
221-00-356-3: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-650-290: RNCC: 3 | RNVC: 2
4900059-211410.000.0: RNCC: 3 | RNVC: 2
4900059-211410.000.0: RNCC: 3 | RNVC: 2
4900059-211410-000-0: RNCC: 5 | RNVC: 2
DIN60060-2-25X290X440-C3/SCHLAUF: RNCC: 5 | RNVC: 9
221-00-356-3: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-164-8383
Retaining Strap

121648383
5077 227 004: RNCC: 3 | RNVC: 2
3709937022: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-359-2948
Mending Plate

123592948
869144003: RNCC: 3 | RNVC: 2

21 Jan 2003

5340-12-359-3464
Caster Wheel

123593464
865306602: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-359-6031
Loop Clamp

123596031
9429970290: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-194-9952
Loop Clamp

121949952
DIN3016-1-B1-27X25-W1-2: RNCC: 2 | RNVC: 2
RS0.27/25: RNCC: 3 | RNVC: 2
DIN3016-B1-27X25-W1-2: RNCC: 3 | RNVC: 2
4100025027: RNCC: 5 | RNVC: 2
RS27-25: RNCC: 5 | RNVC: 2
RS27/25: RNCC: 5 | RNVC: 2
DIN3016-B1-27X25-W1-2: RNCC: 5 | RNVC: 9
VG95931-B27X25-W1: RNCC: 5 | RNVC: 9

28 Dec 1982

5340-12-172-2776
Clamping Catch

121722776
VG95136B1-50X30: RNCC: 2 | RNVC: 2
VG95136-B1-50X30: RNCC: 3 | RNVC: 2
VG95136B1-50X30: RNCC: 3 | RNVC: 2
500.074: RNCC: 3 | RNVC: 2
2360-261620.05.0: RNCC: 5 | RNVC: 2
2360-261620-05-0: RNCC: 5 | RNVC: 2
2360-261620.05.0: RNCC: 5 | RNVC: 2
2360-261620.05.0: RNCC: 5 | RNVC: 2
VG95136B1-50X30: RNCC: 5 | RNVC: 9
2360-261620-05-0: RNCC: 5 | RNVC: 9

10 Jan 1978

5340-12-306-0936
Mending Plate

123060936
P-525426-405: RNCC: 3 | RNVC: 2
P525426-405: RNCC: 5 | RNVC: 2

27 Jan 1986

5340-12-189-7681
Handwheel

121897681
VG85082-A-80X8: RNCC: 2 | RNVC: 2
VG85082-A-80X8: RNCC: 3 | RNVC: 2
VG85082-A-80X8: RNCC: 3 | RNVC: 2
VG85082-A-80X8: RNCC: 3 | RNVC: 9
A80X8VG85082: RNCC: 5 | RNVC: 2
A80X8VG85082-RG5: RNCC: 5 | RNVC: 2
A80X8VG85082GCUSN5ZNPB: RNCC: 5 | RNVC: 2
A80X8VG85082RG5: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-12-700-6570
Retaining Strap

127006570
VG95211-ML-127006570: RNCC: 2 | RNVC: 2
5.12.6405.0080.00: RNCC: 3 | RNVC: 2
0501401331109: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-701-9413
Rod End Clevis

127019413
VG95211-ML-127019413: RNCC: 2 | RNVC: 2
5.12.0220.1240.92: RNCC: 3 | RNVC: 2

13 Mar 1995

Load More Results