What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 41 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 41 of 178

5340-12-351-2100
Spacing Threaded Standoff

123512100
78024 95503: RNCC: 2 | RNVC: 2
7802495503: RNCC: 3 | RNVC: 2
78024 95503: RNCC: 5 | RNVC: 9

3 Jul 2000

5340-12-149-1090
Retaining Strap

121491090
121L19002E1: RNCC: 3 | RNVC: 2
121L19002: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-311-5176
Retaining Strap

123115176
A11B741122161: RNCC: 3 | RNVC: 2

11 Sep 1987

5340-12-010-8547

5340-12-376-2277
Butt Hinge

123762277
10065009: RNCC: 3 | RNVC: 2

28 Aug 2008

5340-12-377-9340
Rod End Clevis

123779340
000-0030-082-067: RNCC: 3 | RNVC: 2
8134744: RNCC: 5 | RNVC: 2
58433902: RNCC: 5 | RNVC: 2

26 Feb 2009

5340-12-351-0379
Metallic Solid Wheel

123510379
3099-111000.13: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-300-7977
Angle Bracket

123007977
23114-4172.00: RNCC: 2 | RNVC: 2
23114-4172.00: RNCC: 3 | RNVC: 2
23114-4172-00: RNCC: 5 | RNVC: 9
23114-4172.00: RNCC: 5 | RNVC: 9
23114-4172-00: RNCC: 5 | RNVC: 9
23114-4172.00: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-181-7814
Nonmetallic Bumper

121817814
823721231A: RNCC: 3 | RNVC: 2

17 Dec 1979

5340-12-392-4120
Pipe Hanger

123924120
I009309: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-12-041-0753

5340-12-360-0456
Support Hook

123600456
9416800251: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-339-3070
Nonmetallic Bumper

123393070
3964334: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-12-342-1264
Access Cover

123421264
572675003: RNCC: 3 | RNVC: 2
57 267 5003: RNCC: 5 | RNVC: 2

14 Dec 1996

5340-12-305-9891
Lock-Release Lever

123059891
373.990: RNCC: 3 | RNVC: 2

17 Jan 1986

5340-12-333-5118
Angle Bracket

123335118
5802017-701800.05: RNCC: 2 | RNVC: 2
5802017-701800.05: RNCC: 3 | RNVC: 2

28 Dec 1993

5340-12-357-9192
Dust And Moisture Seal Protective Cover

123579192
2300388-250330.000: RNCC: 2 | RNVC: 2
2300388-250330.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-393-8337
Section Block Clamp

123938337
T290M2202289: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-12-122-2375

5340-12-344-1521
Mounting Plate

123441521
2300262-181000.009.0: RNCC: 2 | RNVC: 2
2300262-181000.009.0: RNCC: 3 | RNVC: 2
1518156: RNCC: 5 | RNVC: 2

18 Sep 1997

5340-12-340-0894
Loop Clamp

123400894
V6530-00003-045: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-332-5785
Access Cover

123325785
532417-0925.000: RNCC: 2 | RNVC: 2
532417-0925.000: RNCC: 3 | RNVC: 2
532417-0925.000: RNCC: 5 | RNVC: 9

24 Aug 1993

5340-12-325-2295
Swivel Caster

123252295
LH-SPO200P-RI: RNCC: 3 | RNVC: 2

17 May 1991

5340-12-171-7475
Pad Eye

121717475
490126-22404-08: RNCC: 3 | RNVC: 2
895373: RNCC: 5 | RNVC: 2

10 Nov 1977

5340-12-360-7660
Clamping Catch

123607660
D0065952-001: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-310-2279
Nut And Bolt Locking Plate

123102279
0341 0256: RNCC: 3 | RNVC: 2
5112-17-07-35: RNCC: 5 | RNVC: 2
03410256: RNCC: 5 | RNVC: 2

22 Apr 1987

5340-12-365-3895
Mounting Plate

123653895
2500267-190063.002.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-361-5315
Sealing Plug Assembly

123615315
4200-278-7210: RNCC: 2 | RNVC: 2
DGY2034049: RNCC: 3 | RNVC: 2
R55188-1: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-12-174-6168
Loop Clamp

121746168
DIN3016-1-D2-18-18X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.2X18/15: RNCC: 3 | RNVC: 2
DIN3016-D2-18-18X15-W1-2: RNCC: 3 | RNVC: 2
4219215018: RNCC: 5 | RNVC: 2
RSGU1100.2X18-15: RNCC: 5 | RNVC: 2
RSGU1100.2X18/15: RNCC: 5 | RNVC: 2
RSGU1100-2X18-15: RNCC: 5 | RNVC: 9
DIN3016-D2-18-18X15-W1-2: RNCC: 5 | RNVC: 9

17 Jul 1978

5340-12-318-8747
Mending Plate

123188747
2300264-068520.05.0: RNCC: 2 | RNVC: 2
2300264-068520.05.0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-189-4250
Dust And Moisture Seal Protective Cap

121894250
127: RNCC: 3 | RNVC: 2
250/127: RNCC: 3 | RNVC: 2
5063068-4: RNCC: 5 | RNVC: 2
GPN250/127: RNCC: 5 | RNVC: 2
5063068: RNCC: 5 | RNVC: 2
5063068/4: RNCC: 5 | RNVC: 2
127GPN250: RNCC: 5 | RNVC: 9
250168-9642.01: RNCC: 5 | RNVC: 9
250127000: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-12-333-0468
Bail Handle

123330468
714-001100-955-0: RNCC: 3 | RNVC: 2
ZSP3-003: RNCC: 5 | RNVC: 2

22 Oct 1993

5340-12-375-6687
Dust And Moisture Seal Protective Plug Set

123756687
L258M2881101: RNCC: 3 | RNVC: 2

23 Jun 2008

5340-12-362-6286
Access Cover

123626286
1216 1761: RNCC: 3 | RNVC: 2
12161761: RNCC: 5 | RNVC: 2

12 Mar 2004

5340-12-324-7135
Nonmetallic Bumper

123247135
54.0070.042.00: RNCC: 2 | RNVC: 2
54.0070.042.00: RNCC: 3 | RNVC: 2

19 Mar 1991

5340-12-316-2925
Plain Solid Disk

123162925
6378448: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-165-9301
Spring Loaded Cylinder Fastener

121659301
6020067: RNCC: 3 | RNVC: 2
46467: RNCC: 5 | RNVC: 2

15 Jul 1976

5340-12-307-0426
Rim Lock

123070426
6000094: RNCC: 3 | RNVC: 2

30 Apr 1986

5340-12-145-9294

5340-12-092-4426

5340-12-346-9326
Mounting Bracket

123469326
3682201: RNCC: 3 | RNVC: 2
368.2201: RNCC: 5 | RNVC: 2

29 Sep 1998

5340-12-183-8469
Catch Strike

121838469
181847531: RNCC: 3 | RNVC: 2

24 May 1980

5340-12-301-2718
Helical Compression Spring Seat

123012718
080342-226.25.14.30: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-12-360-8445
Spacing Threaded Standoff

123608445
EEDB3050: RNCC: 3 | RNVC: 2
EEDB3050: RNCC: 5 | RNVC: 9

16 Jul 2003

5340-12-352-2255
Mounting Bracket

123522255
5062031540: RNCC: 3 | RNVC: 2
506 203 15 40: RNCC: 5 | RNVC: 2

26 Oct 2000

5340-12-375-9776
Loop Clamp

123759776
63188A: RNCC: 3 | RNVC: 2

28 Jul 2008

5340-12-300-3117
Butt Hinge

123003117
3097401337: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-188-6906
Angle Bracket

121886906
81654014021: RNCC: 3 | RNVC: 2
81.65401.4021: RNCC: 5 | RNVC: 2

23 Jul 1981

5340-12-333-8430
Lock-Release Lever

123338430
1156890001: RNCC: 3 | RNVC: 2
115 689 00 01: RNCC: 5 | RNVC: 2
115 689 0001: RNCC: 5 | RNVC: 2

16 Feb 1994

5340-12-363-2917
Tee Hinge

123632917
108.071202: RNCC: 3 | RNVC: 2
81972010330: RNCC: 5 | RNVC: 2
108 071202: RNCC: 5 | RNVC: 9

20 May 2004

5340-12-193-7862
Nonmetallic Bumper

121937862
4068810051: RNCC: 3 | RNVC: 2

30 Aug 1982

5340-12-359-2288
Dust And Moisture Seal Protective Cap

123592288
640665: RNCC: 3 | RNVC: 2
64 06 65: RNCC: 5 | RNVC: 2

14 Jan 2003

5340-12-094-4539

5340-12-092-0463

5340-12-356-5231
Access Cover

123565231
11.07313-0141: RNCC: 3 | RNVC: 2
11.07300-0420POS004: RNCC: 5 | RNVC: 2

7 Mar 2002

5340-12-164-9577
Nut And Bolt Locking Plate

121649577
681-23000-04: RNCC: 3 | RNVC: 2
681-23000-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-3177
Electrical-Mechanical Equipment Post

123123177
06.46760-0110: RNCC: 3 | RNVC: 2
M1500-B59X55: RNCC: 5 | RNVC: 2

15 Dec 1987

5340-12-183-2565
Wood Runner

121832565
56-0049-504-05: RNCC: 3 | RNVC: 2

28 Mar 1980

5340-12-316-8869
Double Angle Bracket

123168869
01800-0000-01-03: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-12-357-8446
Angle Bracket

123578446
5400051-376830.01: RNCC: 2 | RNVC: 2
5400051-376830.01: RNCC: 3 | RNVC: 2

1 Aug 2002

5340-12-300-6493
Mending Plate

123006493
1000091-1000.11: RNCC: 2 | RNVC: 2
1000091-1000.11: RNCC: 3 | RNVC: 2

21 Aug 1984

5340-12-333-4203
Dust And Moisture Seal Protective Cap

123334203
9800-00-00.08: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-362-0370
Mounting Bracket

123620370
70-000-229: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-12-161-2409
Rod End Clevis

121612409
160-73697-01: RNCC: 3 | RNVC: 2
160-73697-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-368-1405
Mounting Bracket

123681405
J53228665-001: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-12-306-9554
Resilient Mount

123069554
E1T2569-13: RNCC: 3 | RNVC: 2
E1T 2569-13: RNCC: 3 | RNVC: 2
E1T 2569-13: RNCC: 3 | RNVC: 2

21 Apr 1986

5340-12-374-5862
Antipilferage Seal Locking Wire

123745862
1137906-00: RNCC: 3 | RNVC: 2

27 Feb 2008

5340-12-301-8888
Double Angle Bracket

123018888
20-5220-146: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-356-2616
Mechanical Stop

123562616
2125-121000A03B: RNCC: 2 | RNVC: 2
2125-121000A03B: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-12-338-1637
Electronic Equipment Hardware Kit

123381637
5802017-715400.00: RNCC: 2 | RNVC: 2
5802017-715400.00: RNCC: 3 | RNVC: 2

31 May 1995

5340-12-388-0757
Mounting Plate

123880757
301RD574891: RNCC: 3 | RNVC: 2
904014003: RNCC: 5 | RNVC: 2

23 Feb 2012

5340-12-197-3400
Electrical-Mechanical Equipment Post

121973400
2084-581: RNCC: 3 | RNVC: 2

13 Oct 1983

5340-12-366-8999
Dust And Moisture Seal Protective Plug

123668999
4301080022095: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-382-9845
Mounting Bracket

123829845
14-259010.040.00: RNCC: 3 | RNVC: 2

31 Aug 2010

5340-12-333-7571
Lock-Release Lever

123337571
15 0004 439: RNCC: 2 | RNVC: 2
15 0004 439: RNCC: 3 | RNVC: 2
150004439: RNCC: 5 | RNVC: 2

2 Feb 1994

5340-12-353-1563
Double Angle Bracket

123531563
5062230201: RNCC: 3 | RNVC: 2
506 223 02 01: RNCC: 5 | RNVC: 2

5 Feb 2001

5340-12-147-6953
Klemmsche Kupplung

5340-12-199-0305
Mending Plate

121990305
5801549-2110.002: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-12-358-4249
Access Cover

123584249
4000A-341250.000.0: RNCC: 2 | RNVC: 2
4000A-341250.000.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-701-7654
Retaining Band

127017654
VG95211-ML-127017654: RNCC: 2 | RNVC: 2
5.12.7701.8320.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-167-1940
Door Button

121671940
4-8000-100: RNCC: 3 | RNVC: 2
4-8000-100: RNCC: 5 | RNVC: 2

1 Dec 1976

5340-12-345-2856
Runner

123452856
615.322-5: RNCC: 3 | RNVC: 2
615-322-5: RNCC: 5 | RNVC: 2
6600149-2.11: RNCC: 5 | RNVC: 2

25 Feb 1998

5340-12-170-1206
Angle Bracket

121701206
1392451-080200.030.0: RNCC: 3 | RNVC: 2
1392451-080200-030-0: RNCC: 5 | RNVC: 2

27 Jun 1977

5340-12-302-0179
Resilient Mount

123020179
DIN95366-D2-NR70ST: RNCC: 2 | RNVC: 2
100002-NR70.ST: RNCC: 5 | RNVC: 2
3.1.1.70NR/ST: RNCC: 5 | RNVC: 2
60012031-NR70.ST: RNCC: 5 | RNVC: 2
786013HART: RNCC: 5 | RNVC: 2
57860130016: RNCC: 5 | RNVC: 2
VG95366-C2-NR70ST: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-12-701-8459
Loop Clamp

127018459
VG95211-ML-127018459: RNCC: 2 | RNVC: 2
5150A-8: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-381-1361
Loop Clamp

123811361
6.373-439.0: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-12-306-0795
Mending Plate

123060795
P-243854-009: RNCC: 3 | RNVC: 2
P243854-009: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-361-7679
Mounting Bracket

123617679
2500266-196900.000.0: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-12-303-3375
Case Corner

123033375
P-231993-763: RNCC: 3 | RNVC: 2
P231993-763: RNCC: 5 | RNVC: 2

15 Mar 1985

5340-12-702-5883
Mounting Bracket

127025883
VG95211-ML-127025883: RNCC: 2 | RNVC: 2
5.51.9205.0235.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-323-4492
Snap Hook

123234492
3121801 V: RNCC: 3 | RNVC: 2
245S180X14VERZINKT: RNCC: 3 | RNVC: 2
245 S-180X14 VERZINKT: RNCC: 3 | RNVC: 9
245S180X14MM: RNCC: 5 | RNVC: 2
245S-180X14VERZINKT: RNCC: 5 | RNVC: 9

27 Nov 1990

5340-12-321-0624
Nut And Bolt Locking Plate

123210624
DIN3015-L-VS-3-W1: RNCC: 2 | RNVC: 2
SB-A3: RNCC: 3 | RNVC: 2
HRL3SIP STZN: RNCC: 3 | RNVC: 2
SIG3: RNCC: 3 | RNVC: 2
SB-A3: RNCC: 5 | RNVC: 2
DIN3015-LVS3-W1: RNCC: 5 | RNVC: 2

22 Mar 1990

5340-12-146-3234
Compression Cup

121463234
6.0495.15.9.0151: RNCC: 3 | RNVC: 9
TSF30-44-14PA/101: RNCC: 5 | RNVC: 2
TSF30-44-14PA101: RNCC: 5 | RNVC: 2
1215 2261: RNCC: 5 | RNVC: 2
6-0495-15-9-0151: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-152-4549
Retaining Strap

121524549
115-03261-4: RNCC: 3 | RNVC: 9
1092105-0100-021: RNCC: 5 | RNVC: 9
1092105-0100-021: RNCC: 5 | RNVC: 9
4-7822-823: RNCC: 5 | RNVC: 9
7822823: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-6027
Access Door

123266027
6100131-110600: RNCC: 2 | RNVC: 2

11 Oct 1991

5340-12-328-9816
Loop Clamp

123289816
81974200023: RNCC: 3 | RNVC: 2
81.97420-0023: RNCC: 5 | RNVC: 2

4 Jul 1992

5340-12-388-0355
Mechanic Equipment Hardware Kit

123880355
5803674-220410.00: RNCC: 2 | RNVC: 2
7804238510: RNCC: 3 | RNVC: 2

17 Feb 2012

5340-12-327-0233
Spring Tension Clip

123270233
R04855-101: RNCC: 3 | RNVC: 2

22 Nov 1991

5340-12-344-5903
Butt Hinge Leaf

123445903
J5282007-003: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-12-335-3450
Mounting Plate

123353450
6700018-201700.01: RNCC: 2 | RNVC: 2
6700018-201700.01: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-12-304-6055
Pawl Fastener

123046055
5801609-1900.03: RNCC: 2 | RNVC: 2
5801609-1900.03: RNCC: 3 | RNVC: 2
5801609-1900.03: RNCC: 5 | RNVC: 2

5 Aug 1985

5340-12-701-8428
Loop Clamp

127018428
VG95211-ML-127018428: RNCC: 2 | RNVC: 2
5148A-65: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-312-7954
Double Angle Bracket

123127954
5000000-01372: RNCC: 3 | RNVC: 2

5 Feb 1988

5340-12-340-4324
Mounting Bracket

123404324
VG95211-ML-123404324: RNCC: 2 | RNVC: 2
1AJ0042T01: RNCC: 3 | RNVC: 2

12 Apr 1996

5340-12-348-0943
Turnbuckle Body

123480943
900-5067-00-03: RNCC: 3 | RNVC: 2
9V2831-04-02: RNCC: 5 | RNVC: 2
065.5096250: RNCC: 5 | RNVC: 2
5096250: RNCC: 5 | RNVC: 2

13 Apr 1999

5340-12-335-2531
Spacing Threaded Standoff

123352531
C42107-A456-C18: RNCC: 2 | RNVC: 2
C42107-A456-C18: RNCC: 3 | RNVC: 2
35630253: RNCC: 3 | RNVC: 2

1 Aug 1994

5340-12-176-4460
Nut And Bolt Locking Plate

121764460
113-271: RNCC: 3 | RNVC: 2
1761-0000-0302: RNCC: 5 | RNVC: 2

27 Nov 1978

5340-12-333-9327
Mounting Bracket

123339327
S4-9803601: RNCC: 3 | RNVC: 2
S4-9803601: RNCC: 5 | RNVC: 9

24 Feb 1994

5340-12-302-8431
Rigid Caster

123028431
6600117-430000.00: RNCC: 2 | RNVC: 2
6600117-430000.00: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-151-6315
Nonmetallic Bumper

121516315
VG95092B50X12NR60: RNCC: 2 | RNVC: 2
82200-B50X12.NR65: RNCC: 3 | RNVC: 2
2779SCHWARZ: RNCC: 3 | RNVC: 2
B50X12.60NR: RNCC: 5 | RNVC: 2
61014-72-25: RNCC: 5 | RNVC: 9
2779SCHWARZ: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-9808
Bow Handle

121789808
2300109-180022.000.0: RNCC: 2 | RNVC: 2
2300109-180022-000-0: RNCC: 3 | RNVC: 2
2300109-180022-000-0: RNCC: 3 | RNVC: 2
2300109-180022.000.0: RNCC: 3 | RNVC: 2
2300109-180022-000-0: RNCC: 5 | RNVC: 9
2300109-180022.000.0: RNCC: 5 | RNVC: 9

30 May 1979

5340-12-305-2570
Angle Bracket

123052570
4900059-323441.000.0/9: RNCC: 3 | RNVC: 2
4900059-323441.009.0: RNCC: 5 | RNVC: 2

15 Oct 1985

5340-12-171-1205
Catch Strike

121711205
81626800030: RNCC: 3 | RNVC: 2
23230-172446-001-0: RNCC: 5 | RNVC: 9
23230-172446.001.0: RNCC: 5 | RNVC: 9

9 Sep 1977

5340-12-330-3313
Compression Cup

123303313
H220-2-88NBR/101: RNCC: 3 | RNVC: 2
H220-2: RNCC: 5 | RNVC: 2

3 Dec 1992

5340-12-153-8266
Antipilferage Seal Locking Wire

121538266
DIN1367-0,7-0,3-STZN-150MM LANG: RNCC: 2 | RNVC: 2
0,7-0,3DIN1367-STZN LAENGE 150MM: RNCC: 5 | RNVC: 2
0-7-0-3DIN1367STZNLAENGE150MM: RNCC: 5 | RNVC: 2
1-3X0-7DIN1367VERZINKT150MMLANG: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-187-7792
Electrical-Mechanical Equipment Post

121877792
VG95148C5,5XM4X111,5-NRST: RNCC: 2 | RNVC: 2
VG95148C5,5XM4X111,5-NRST: RNCC: 3 | RNVC: 2
5801114-2.002: RNCC: 3 | RNVC: 2
5801114-2-002: RNCC: 5 | RNVC: 9

6 May 1981

5340-12-701-6539
Loop Clamp

127016539
VG95211-ML-127016539: RNCC: 2 | RNVC: 2
5.12.7207.8002.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-126-1187
Retaining Strap

121261187
NO PRIMARY REF 12-126-1187: RNCC: 3 | RNVC: 2
1025074VERBLEIT: RNCC: 5 | RNVC: 2
7DIN49045-ST-VERBLEIT: RNCC: 5 | RNVC: 9
1025074-VERBLEIT: RNCC: 5 | RNVC: 9
7DIN49045STVERBLEIT: RNCC: 5 | RNVC: 9
DIN49045-7-ST-VERBLEIT: RNCC: 5 | RNVC: 9
7DIN49045FLUSZSTAHLVERBLEIT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-0935
Mending Plate

123260935
1865-020130.00.0: RNCC: 3 | RNVC: 9
230427: RNCC: 3 | RNVC: 9

7 Aug 1991

5340-12-194-4667
Pipe Bracket

121944667
P-295446-404: RNCC: 3 | RNVC: 2
P295446-404: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-12-380-7616
Mounting Plate

123807616
534415: RNCC: 3 | RNVC: 2

26 Nov 2009

5340-12-339-4502
Mounting Plate

123394502
4220 306 067: RNCC: 3 | RNVC: 2
4220306067: RNCC: 5 | RNVC: 2

24 Nov 1995

5340-12-025-9891

5340-12-133-5699

5340-12-313-7504
Mending Plate

123137504
5802017-711100.06: RNCC: 2 | RNVC: 2
5802017-711100.06: RNCC: 3 | RNVC: 2
5802017-711100.06: RNCC: 5 | RNVC: 9
5802017-711100.06: RNCC: 5 | RNVC: 9

30 Apr 1988

5340-12-389-2554
Bow Handle

123892554
168589006200: RNCC: 3 | RNVC: 2
168589006200: RNCC: 5 | RNVC: 2

13 Jun 2012

5340-12-165-4496
Handwheel

121654496
1241-3015: RNCC: 2 | RNVC: 2
1241-3015: RNCC: 3 | RNVC: 2
1241-3015: RNCC: 5 | RNVC: 9

6 May 1976

5340-12-309-9837
Spring Tension Clip

123099837
0049886278: RNCC: 3 | RNVC: 9

25 Mar 1987

5340-12-381-0870
Webbing Strap

123810870
4255800482: RNCC: 3 | RNVC: 2

11 Jan 2010

5340-12-374-2553
Mounting Bracket

123742553
L521M3834206: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-134-4939

5340-12-373-6298
Block Clamp

123736298
8811420440: RNCC: 3 | RNVC: 2

22 Nov 2007

5340-12-315-3055
Mounting Bracket

123153055
6204926041: RNCC: 3 | RNVC: 2
620 492 60 41: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-313-9348
Double Angle Bracket

123139348
4255512540: RNCC: 3 | RNVC: 2
425 551 25 40: RNCC: 5 | RNVC: 2

21 May 1988

5340-12-359-0504
Nonmetallic Bumper

123590504
614208: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-369-4020
Runner

123694020
3035234: RNCC: 3 | RNVC: 2
3035.234: RNCC: 5 | RNVC: 2

29 Jun 2006

5340-12-386-7093
Dust And Moisture Seal Protective Cap-Plug

123867093
T10016: RNCC: 3 | RNVC: 2
0729834: RNCC: 5 | RNVC: 2

26 Sep 2011

5340-12-319-8060
Access Cover

123198060
360 010 0001: RNCC: 3 | RNVC: 2
112-15.652: RNCC: 5 | RNVC: 2

7 Nov 1989

5340-12-027-4623

5340-12-042-1624

5340-12-321-3836
Double Angle Bracket

123213836
G32960-V0081-B46: RNCC: 3 | RNVC: 2

11 May 1990

5340-12-321-6172
Bow Handle

123216172
774-046-14: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-339-6524
Nonmetallic Bumper

123396524
214662: RNCC: 3 | RNVC: 2
94095-123.06: RNCC: 5 | RNVC: 2

18 Dec 1995

5340-12-305-1953
Angle Bracket

123051953
5801763-022000.002: RNCC: 2 | RNVC: 2
5801763-022000.002: RNCC: 3 | RNVC: 2
5801763-022000.002: RNCC: 5 | RNVC: 9

4 Oct 1985

5340-12-161-3019
Rod End Connector

121613019
160-82039-03: RNCC: 3 | RNVC: 2
160-82039-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-342-7727
Access Cover

123427727
5001-107: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-12-389-0958
Mounting Plate

123890958
1187170: RNCC: 3 | RNVC: 2
H1.1784-47-01-00.00-02: RNCC: 5 | RNVC: 2

25 May 2012

5340-12-701-1081
Loop Clamp

127011081
VG95211-ML-127011081: RNCC: 2 | RNVC: 2
3753A-16-18: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-383-7822
Angle Bracket

123837822
601241-621050.02: RNCC: 2 | RNVC: 2
601241-621050.02: RNCC: 3 | RNVC: 2

7 Dec 2010

5340-12-361-2954
Handle Grip

123612954
CBD45087P01: RNCC: 3 | RNVC: 2

15 Sep 2003

5340-12-392-2791
Mounting Bracket

123922791
7000153: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-010-0875

5340-12-702-5634
Mounting Bracket

127025634
VG95211-ML-127025634: RNCC: 2 | RNVC: 2
5.51.7611.0030.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-166-4836
Spring Tension Clip

121664836
LN29789-8: RNCC: 2 | RNVC: 2
LN29789-08: RNCC: 5 | RNVC: 2

15 Sep 1976

5340-12-308-7438
Nonmetallic Bumper

123087438
1281-16000.04: RNCC: 2 | RNVC: 2
159324: RNCC: 3 | RNVC: 2
1281-16000.04: RNCC: 5 | RNVC: 2

13 Nov 1986

5340-12-338-2639
Access Door

123382639
3800077-000.02: RNCC: 2 | RNVC: 2
3800077-000.02: RNCC: 3 | RNVC: 2

13 Jun 1995

5340-12-359-7094
Mounting Bracket

123597094
5801609-1900.07: RNCC: 2 | RNVC: 2
5801609-1900.07: RNCC: 3 | RNVC: 2

4 Mar 2003

5340-12-133-4862
Leather Strap

121334862
NO PRIMARY REF 12-133-4862: RNCC: 3 | RNVC: 2
500123.00.01: RNCC: 5 | RNVC: 9
DIN6408-A25X900-GEBRAEUNT,GENAE.: RNCC: 5 | RNVC: 9
A25X900DIN6408ANGEBRAEUNTGENAEHT: RNCC: 5 | RNVC: 9
DIN6408-A25X900-ANGEBRAEUNT,GENA: RNCC: 5 | RNVC: 9
DIN6408-A25X900-GEBRAEUNT,GENAE.: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-367-9613
Dust And Moisture Seal Boot

123679613
NO PRIMARY REF 12-367-9613: RNCC: 3 | RNVC: 2
7069530: RNCC: 5 | RNVC: 2

10 Nov 2005

5340-12-362-8574
Nonmetallic Bumper

123628574
70544-001: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-12-349-3760
Retaining Clip

123493760
VG95211-ML-123493760: RNCC: 2 | RNVC: 2
SPB014304.100.350ZNSW: RNCC: 3 | RNVC: 2
14304: RNCC: 5 | RNVC: 2

5 Nov 1999

5340-12-317-9560
Mounting Bracket

123179560
4900343-252000.00: RNCC: 2 | RNVC: 2
10 0012 151: RNCC: 3 | RNVC: 2
4900343-252000.00: RNCC: 5 | RNVC: 2

30 May 1989

5340-12-326-4404
Loop Clamp

123264404
6014920740: RNCC: 3 | RNVC: 2

16 Sep 1991

5340-12-341-6520
Loop Clamp

123416520
03745300: RNCC: 3 | RNVC: 2
03745300.273: RNCC: 5 | RNVC: 2

10 Oct 1996

5340-12-317-1820
Dust And Moisture Seal Protective Plug

123171820
4609970786: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-198-2432
Angle Bracket

121982432
66.3851.521.02-A001: RNCC: 3 | RNVC: 2
161781: RNCC: 5 | RNVC: 2

5 Jan 1984

5340-12-010-7769

5340-12-135-6506

5340-12-321-1219
Access Door

123211219
9000 2093: RNCC: 3 | RNVC: 2

29 Mar 1990

5340-12-361-5523
Mounting Plate

123615523
4138 302 070: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-12-352-2832
Mechanical Stop

123522832
8832350327: RNCC: 3 | RNVC: 2
883 235 03 27: RNCC: 5 | RNVC: 2

3 Nov 2000

5340-12-186-0338
Mounting Plate

121860338
81155010375: RNCC: 3 | RNVC: 2
81.15501.0375: RNCC: 5 | RNVC: 2

25 Nov 1980

5340-12-304-9022
Case Corner

123049022
CF 339 341: RNCC: 3 | RNVC: 2
CF 339 341: RNCC: 5 | RNVC: 2
CF 339341: RNCC: 5 | RNVC: 2

3 Sep 1985

5340-12-306-6285
Rim Lock

123066285
84172: RNCC: 3 | RNVC: 2
030306: RNCC: 5 | RNVC: 2

17 Mar 1986

5340-12-324-0664
Angle Bracket

123240664
272.337.728: RNCC: 3 | RNVC: 2
272.337 728: RNCC: 5 | RNVC: 9

18 Jan 1991

5340-12-321-0190
Dust And Moisture Seal Protective Cap

123210190
PAN3863T05: RNCC: 3 | RNVC: 2

16 Mar 1990

5340-12-145-2537
Nonmetallic Bumper

121452537
741279MITTEL: RNCC: 3 | RNVC: 2
57412790009: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-321-5039
Mounting Bracket

123215039
10341201: RNCC: 3 | RNVC: 2

25 May 1990

5340-12-390-5399
Spacing Threaded Standoff

123905399
51526004: RNCC: 3 | RNVC: 2

21 Nov 2012

5340-12-381-6679
Dust And Moisture Seal Protective Cap

123816679
310326005H: RNCC: 3 | RNVC: 2

16 Mar 2010

5340-12-150-9692

5340-12-040-1285

5340-12-130-2495

5340-12-345-0625
Door Button

123450625
5803688-101340.00: RNCC: 2 | RNVC: 2
0106.13400.160: RNCC: 3 | RNVC: 2

27 Jan 1998

5340-12-356-8445
Angle Bracket

123568445
ED88-0100-01001-111: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-317-3233
Access Door

123173233
4900064-41226.006: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-156-0985
Resilient Mount

121560985
80-465.013: RNCC: 3 | RNVC: 2
80-465.013: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-337-7912
Angle Bracket

123377912
465-151160.001: RNCC: 3 | RNVC: 9
9895035: RNCC: 5 | RNVC: 9

11 Apr 1995

5340-12-366-0473
Multiple Angle Bracket

123660473
J29120115-003: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-12-165-3576
Mending Plate

121653576
307.141-10001.03: RNCC: 3 | RNVC: 2
0307141-10001-03: RNCC: 5 | RNVC: 9

23 Apr 1976

5340-12-368-1317
Mounting Plate

123681317
5161-320500A01B: RNCC: 2 | RNVC: 2
5161-320500A01B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-701-5453
Retaining Strap

127015453
VG95211-ML-127015453: RNCC: 2 | RNVC: 2
5.12.6111.0220.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-313-0211
Double Angle Bracket

123130211
P-086149-016: RNCC: 3 | RNVC: 2
P086149-016: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-341-9077
Angle Bracket

123419077
160-62229-14: RNCC: 3 | RNVC: 2
160-62229.14: RNCC: 5 | RNVC: 2
160-62229-14: RNCC: 5 | RNVC: 2
160-62229.14: RNCC: 5 | RNVC: 9

14 Nov 1996

5340-12-183-6337
Double Angle Bracket

121836337
02537619: RNCC: 3 | RNVC: 2
2537619ED5051-56: RNCC: 5 | RNVC: 2

6 May 1980

5340-12-319-6287
Mounting Plate

123196287
RP969036: RNCC: 3 | RNVC: 2
RP9690.36: RNCC: 5 | RNVC: 2

19 Oct 1989

5340-12-367-1746
Mounting Bracket

123671746
3040478: RNCC: 3 | RNVC: 2

15 Jul 2005

5340-12-185-8894
Loop Clamp

121858894
1160281: RNCC: 3 | RNVC: 9

6 Nov 1980

5340-12-362-9783
Mounting Bracket

123629783
2300042-992913.000: RNCC: 2 | RNVC: 2
2300042-992913.000: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-12-368-6581
Sliding Door Track

123686581
7D1843871: RNCC: 3 | RNVC: 2
7D1 843 871: RNCC: 5 | RNVC: 2

4 Apr 2006

5340-12-351-6524
Manual Control Lever

123516524
218517-7054: RNCC: 3 | RNVC: 2

11 Aug 2000

5340-12-362-4086
Spacing Threaded Standoff

123624086
54.0054.342.02: RNCC: 3 | RNVC: 2

18 Feb 2004

5340-12-316-5479
Butt Hinge

123165479
LN9172KFF120: RNCC: 2 | RNVC: 2

24 Jan 1989

5340-12-361-0849
Dust And Moisture Seal Protective Plug

123610849
309281: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-347-9294
Spacing Threaded Standoff

123479294
54.0058.771.00: RNCC: 3 | RNVC: 2

15 Mar 1999

5340-12-361-7600
Angle Bracket

123617600
T290M2076102: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-12-393-7229
Door Closer

123937229
TS4000: RNCC: 3 | RNVC: 2

7 Oct 2013

5340-12-390-6697
Hand Crank

123906697
7124245: RNCC: 3 | RNVC: 2

3 Dec 2012

5340-12-010-0829

5340-12-349-7132
Mounting Bracket

123497132
FAST-302000.02: RNCC: 2 | RNVC: 2
FAST-302000.02: RNCC: 3 | RNVC: 2

28 Dec 1999

5340-12-309-3573
Retaining Strap

123093573
DIN3016-F1-16X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-F1-16X15-W1-2: RNCC: 3 | RNVC: 2
RSGU2.16/15-W1: RNCC: 3 | RNVC: 2
030162: RNCC: 5 | RNVC: 2
RSGU1200.16/15: RNCC: 5 | RNVC: 2
RSGU2.16/15: RNCC: 5 | RNVC: 2
249104668: RNCC: 5 | RNVC: 2
09420015016: RNCC: 5 | RNVC: 2
9420015016: RNCC: 5 | RNVC: 2
VG95931-F16X15-W1: RNCC: 5 | RNVC: 9

19 Jan 1987

5340-12-194-8663
Nonmetallic Bumper

121948663
5802038-270300-02-0: RNCC: 3 | RNVC: 2
5802038-270300-02-0: RNCC: 5 | RNVC: 9

14 Dec 1982

5340-12-321-6153
Webbing Strap

123216153
702-244120-000-0: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-338-8040
Mounting Plate

123388040
6700017-202351.00: RNCC: 2 | RNVC: 2
6700017-202351.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-197-8270
Detent Plunger

121978270
DIN6311-S12: RNCC: 2 | RNVC: 2
07140-06: RNCC: 5 | RNVC: 2
DIN6311-S12: RNCC: 5 | RNVC: 2
S12DIN6311: RNCC: 5 | RNVC: 2
NLM714-06: RNCC: 5 | RNVC: 9
NLM7140-06: RNCC: 5 | RNVC: 9

25 Nov 1983

5340-12-321-4875
Angle Bracket

123214875
702-183132-000-0: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-702-5258
Mounting Plate

127025258
VG95211-ML-127025258: RNCC: 2 | RNVC: 2
5.51.7010.0330.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-8422
Mounting Plate

123658422
M-507-005-09.0/2: RNCC: 3 | RNVC: 2

11 Feb 2005

5340-12-702-5359
Angle Bracket

127025359
VG95211-ML-127025359: RNCC: 2 | RNVC: 2
5.51.7204.0601.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-386-1404
Access Cover

123861404
2500262-064200.001.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-384-3813
Loop Clamp

123843813
DIN3016-1-D2-10-15X20-W1-2-CR: RNCC: 2 | RNVC: 2

18 Feb 2011

5340-12-701-4340
Loop Clamp

127014340
VG95211-ML-127014340: RNCC: 2 | RNVC: 2
5.12.5313.1000.15: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-314-5270
Dust And Moisture Seal Protective Plug

123145270
0242 0926: RNCC: 3 | RNVC: 2
H2873-Q31X5,5-MVQ-3-60: RNCC: 3 | RNVC: 2
02420926ES8928-73: RNCC: 5 | RNVC: 2

15 Jul 1988

5340-12-315-5990
Retaining Strap

123155990
DIN3016-1-F1-37X20-W5-CR: RNCC: 2 | RNVC: 2
RSGU2.37/20-W5: RNCC: 3 | RNVC: 2
DIN3016-F1-37X20-W5: RNCC: 3 | RNVC: 2
DIN3016-F1-37X20-W5: RNCC: 5 | RNVC: 9
VG95931F37X20W5: RNCC: 5 | RNVC: 9

11 Nov 1988

5340-12-346-4211
Mounting Bracket

123464211
2300348-060000.056.0: RNCC: 2 | RNVC: 2
2300348-060000.056.0: RNCC: 3 | RNVC: 2
1806609: RNCC: 5 | RNVC: 2

24 Jul 1998

5340-12-171-2681
Turnbuckle Body

121712681
DIN1479-SPM16-1.3952: RNCC: 2 | RNVC: 2
SP-DIN1479-M16-1.3952: RNCC: 3 | RNVC: 2
M16DIN1479-1-3952: RNCC: 5 | RNVC: 2
M16DIN1479X4CRNIM0N1814: RNCC: 5 | RNVC: 2
SPM16DIN1479-1-3952: RNCC: 5 | RNVC: 2
SPM16DIN1479X4CRNIM0N1814: RNCC: 5 | RNVC: 2

21 Sep 1977

5340-12-374-8634
Access Cover

123748634
SK976-172911.000.0: RNCC: 3 | RNVC: 2
7091313: RNCC: 5 | RNVC: 2
1782700: RNCC: 5 | RNVC: 9

1 Apr 2008

5340-12-164-5220
Butt Hinge Leaf

121645220
23290-185001.003: RNCC: 2 | RNVC: 2
23290-185001-003: RNCC: 3 | RNVC: 2
23290-185001-003: RNCC: 5 | RNVC: 9
23290-185001.003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-8965
Access Cover

123228965
C42392-A46-B40: RNCC: 3 | RNVC: 2

5 Oct 1990

5340-12-177-2682
Helical Compression Spring Seat

121772682
00009619004: RNCC: 3 | RNVC: 2
81917350001: RNCC: 5 | RNVC: 2
81.91735-0001: RNCC: 5 | RNVC: 2
E00009619004: RNCC: 5 | RNVC: 2

24 Jan 1979

5340-12-349-2832
Butt Hinge Leaf

123492832
J52423271-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-181-5708
Manual Control Handle

121815708
8782020004: RNCC: 3 | RNVC: 9
81.97001-0285: RNCC: 5 | RNVC: 2
81970010285: RNCC: 5 | RNVC: 2
8782020004: RNCC: 5 | RNVC: 2

3 Dec 1979

5340-12-327-9464
Angle Bracket

123279464
2653-250000.01: RNCC: 2 | RNVC: 2
2653-250000.01: RNCC: 3 | RNVC: 2

21 Mar 1992

5340-12-322-2419
Caster Frame

123222419
02A-2448-14-02: RNCC: 3 | RNVC: 2

3 Aug 1990

5340-12-361-9822
Helical Compression Spring Retainer

123619822
9175563: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-12-356-1930
Access Cover

123561930
V6530-08005-104: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-12-337-7973
Bow Handle

123377973
5800583-094200.034: RNCC: 3 | RNVC: 2
580083-094200-034: RNCC: 5 | RNVC: 2
VG95149A100X8XM4AL-FB: RNCC: 5 | RNVC: 2

11 Apr 1995

5340-12-155-4261
Retaining Strap

121554261
160-70087-09: RNCC: 3 | RNVC: 2
160-70087-09: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-6114
Angle Bracket

123186114
0241 3811: RNCC: 3 | RNVC: 2
2413811EE0147-01: RNCC: 5 | RNVC: 2
02413811: RNCC: 5 | RNVC: 2
4070350: RNCC: 5 | RNVC: 2

1 Aug 1989

5340-12-314-2041
Mounting Bracket

123142041
272.317 755: RNCC: 2 | RNVC: 2
272.317.755: RNCC: 3 | RNVC: 2
272.317 755: RNCC: 5 | RNVC: 9
2721764.22-22: RNCC: 5 | RNVC: 9

16 Jun 1988

5340-12-340-0892
Loop Clamp

123400892
V6530-00003-047: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-190-2213
Nonmetallic Bumper

121902213
1000042-155000.06: RNCC: 3 | RNVC: 2
22207: RNCC: 5 | RNVC: 2

12 Nov 1981

5340-12-342-3675
Buckle

123423675
42.023.405: RNCC: 3 | RNVC: 9
TSR 50: RNCC: 5 | RNVC: 9

29 Jan 1997

5340-12-360-8339
Mounting Bracket

123608339
4258603014: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-12-358-6853
Runner

123586853
EZ155404: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-360-3249
Mounting Bracket

123603249
3513631426: RNCC: 3 | RNVC: 2
3513631426: RNCC: 5 | RNVC: 2

8 May 2003

5340-12-345-4382
Mounting Bracket

123454382
54.0053.186.00: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-12-392-8634
Mounting Bracket

123928634
9251752001: RNCC: 3 | RNVC: 2

17 Jul 2013

5340-12-324-5844
Mounting Plate

123245844
13 513 063: RNCC: 3 | RNVC: 2
13513063: RNCC: 5 | RNVC: 2

1 Mar 1991

5340-12-349-4107
Nonmetallic Bumper

123494107
0009640101: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-12-375-4527
Webbing Strap

123754527
T15039: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-12-385-4624
Multiple Angle Bracket

123854624
6420100240: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-12-353-1483
Mounting Plate

123531483
5621870540: RNCC: 3 | RNVC: 2
562 187 05 40: RNCC: 5 | RNVC: 2

2 Feb 2001

5340-12-329-5184
Mounting Bracket

123295184
4615401573: RNCC: 3 | RNVC: 2

26 Aug 1992

5340-12-346-7481
Door Button

123467481
2396-800120A08B: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-375-1778
Rod End Clevis

123751778
2995.40.62: RNCC: 3 | RNVC: 2

29 Apr 2008

5340-12-392-8633
Mounting Bracket

123928633
9251784000: RNCC: 3 | RNVC: 2

17 Jul 2013

5340-12-179-7745
Leather Strap

121797745
4257900096: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-337-7747
Angle Bracket

123377747
201261: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-12-344-6900
Mounting Bracket

123446900
5590901640: RNCC: 3 | RNVC: 2

28 Nov 1997

5340-12-199-1367
Angle Bracket

121991367
53.3031.241.02: RNCC: 2 | RNVC: 2
3628024001: RNCC: 3 | RNVC: 2
53.3031.241.02: RNCC: 5 | RNVC: 2
53.3031.241.02: RNCC: 5 | RNVC: 9
36280 24001: RNCC: 5 | RNVC: 9

28 Mar 1984

5340-12-199-3698
Webbing Strap

121993698
707223-8010.000: RNCC: 3 | RNVC: 2

17 Apr 1984

5340-12-044-3472

5340-12-040-6181

5340-12-361-4694
Hand Crank

123614694
009-221.371-000: RNCC: 2 | RNVC: 2
009-221.371-000: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-340-1919
Access Cover

123401919
C79451-A3182-C33: RNCC: 3 | RNVC: 2

13 Mar 1996

5340-12-167-2233
Mending Plate

121672233
490127-32001-05: RNCC: 3 | RNVC: 2
898118: RNCC: 5 | RNVC: 2

1 Dec 1976

5340-12-195-4463
Key Blank

121954463
NO PRIMARY REF 12-195-4463: RNCC: 3 | RNVC: 2
213.02-12.36: RNCC: 5 | RNVC: 9
CA21213: RNCC: 5 | RNVC: 9

24 Feb 1983

5340-12-166-1397
Nonmetallic Bumper

121661397
160-20385-03: RNCC: 3 | RNVC: 2
160-20385-03: RNCC: 5 | RNVC: 9

31 Jul 1976

5340-12-159-0272
Nut And Bolt Locking Plate

121590272
8389940032: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-313-5466
Strap Hinge

123135466
6010143: RNCC: 3 | RNVC: 2
1603868: RNCC: 5 | RNVC: 2
2002.10.00.403: RNCC: 5 | RNVC: 9

15 Apr 1988

5340-12-324-7040
Butt Hinge Leaf

123247040
100418-19100.02: RNCC: 2 | RNVC: 2
100418-19100.02: RNCC: 3 | RNVC: 2
100418-19100.02: RNCC: 5 | RNVC: 9

18 Mar 1991

5340-12-319-4797
Angle Bracket

123194797
502258: RNCC: 3 | RNVC: 2

5 Oct 1989

5340-12-370-4331
Angle Bracket

123704331
7803200295AA: RNCC: 3 | RNVC: 2

7 Nov 2006

5340-12-196-1205
Mending Plate

121961205
211599249A: RNCC: 3 | RNVC: 2

1 Jun 1983

5340-12-176-2556
Nonmetallic Bumper

121762556
810201245C: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-185-2033
Spring Window Bolt

121852033
CF 407 633 BU: RNCC: 3 | RNVC: 2
CF 407 633 BU: RNCC: 5 | RNVC: 2
CF407633AU: RNCC: 5 | RNVC: 2
CF407633BU: RNCC: 5 | RNVC: 2
CF407633AU: RNCC: 5 | RNVC: 2
CF407633BU: RNCC: 5 | RNVC: 2

20 Sep 1980

5340-12-307-2450
Mending Plate

123072450
RP988703: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-350-8193
Angle Bracket

123508193
4139 347 138: RNCC: 3 | RNVC: 2
4139347138: RNCC: 5 | RNVC: 2

25 May 2000

5340-12-350-7334
Mounting Bracket

123507334
13286101: RNCC: 3 | RNVC: 2

12 May 2000

5340-12-192-1518
Angle Bracket

121921518
4378509: RNCC: 3 | RNVC: 2
437.8509: RNCC: 5 | RNVC: 2

29 Mar 1982

5340-12-173-6475
Rod End Clevis

121736475
1422305012: RNCC: 3 | RNVC: 2
0229403: RNCC: 5 | RNVC: 2
1422305012: RNCC: 5 | RNVC: 2
0870586700: RNCC: 5 | RNVC: 2
229403: RNCC: 5 | RNVC: 9

26 Apr 1978

5340-12-345-3751
Access Cover

123453751
81619420073: RNCC: 3 | RNVC: 2
38652: RNCC: 5 | RNVC: 2

10 Mar 1998

5340-12-317-5580
Mounting Plate

123175580
0301 324 009: RNCC: 3 | RNVC: 2
0301324009: RNCC: 5 | RNVC: 2

18 Apr 1989

5340-12-317-1987
Mounting Plate

123171987
3227250018: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-317-1010
Nonmetallic Bumper

123171010
200.752: RNCC: 3 | RNVC: 2

10 Mar 1989

5340-12-185-5221
Dust And Moisture Seal Protective Cap

121855221
1610508002: RNCC: 3 | RNVC: 2

14 Oct 1980

5340-12-331-1394
Swivel Caster

123311394
11444601: RNCC: 3 | RNVC: 2
11444601: RNCC: 5 | RNVC: 2

24 Mar 1993

5340-12-311-8839
Access Cover

123118839
162309: RNCC: 3 | RNVC: 2
162309: RNCC: 5 | RNVC: 9

27 Oct 1987

5340-12-332-6763
Ball Socket Seat

123326763
4039910122: RNCC: 3 | RNVC: 2
00009138240: RNCC: 5 | RNVC: 9
0913824: RNCC: 5 | RNVC: 9

3 Sep 1993

5340-12-350-8369
Nonmetallic Bumper

123508369
02.591.1349: RNCC: 3 | RNVC: 2
02.591.1349: RNCC: 5 | RNVC: 9

26 May 2000

5340-12-315-1365
Spreiz- Befestiger

5340-12-320-7915
Mending Plate

123207915
2300232-205020.000.0: RNCC: 2 | RNVC: 2
2300232-205020.000.0: RNCC: 3 | RNVC: 2
9997023-205020.000.0: RNCC: 5 | RNVC: 2
2300232-205020.000.02: RNCC: 5 | RNVC: 9

16 Feb 1990

5340-12-701-6005
Loop Clamp

127016005
VG95211-ML-127016005: RNCC: 2 | RNVC: 2
5.12.6601.0010.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-301-1653
Angle Bracket

123011653
A-243825-007: RNCC: 3 | RNVC: 2
A243825-007: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-183-4703
Retaining Strap

121834703
P-921080-001: RNCC: 3 | RNVC: 2
P921080-001: RNCC: 5 | RNVC: 2

22 Apr 1980

5340-12-174-6142
Rigid Caster

121746142
23223-011903.05.0: RNCC: 2 | RNVC: 2
23223-011903.05.0: RNCC: 3 | RNVC: 2
1217110: RNCC: 5 | RNVC: 2
23223-011903-05-0: RNCC: 5 | RNVC: 2
23223-011903-05-0: RNCC: 5 | RNVC: 9
23223-011903.05.0: RNCC: 5 | RNVC: 9

17 Jul 1978

5340-12-199-0903
Lock-Release Lever

121990903
3-692-0008: RNCC: 3 | RNVC: 2

24 Mar 1984

5340-12-335-6525
Nonmetallic Bumper

123356525
5 645 388: RNCC: 3 | RNVC: 2

8 Sep 1994

5340-12-340-7524
Rim Lock Set

123407524
365-120-005: RNCC: 2 | RNVC: 2
365-120-005: RNCC: 3 | RNVC: 2

5 Jun 1996

5340-12-366-1774
Flush Lock

123661774
101907: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-12-305-6881
Resilient Mount

123056881
0000FGU0108: RNCC: 3 | RNVC: 2
0007230072: RNCC: 5 | RNVC: 2

4 Dec 1985

5340-12-316-7194
Angle Bracket

123167194
2300035-220300.29: RNCC: 2 | RNVC: 2
2300035-220300.29: RNCC: 5 | RNVC: 9
2300035-220300.29: RNCC: 5 | RNVC: 9

7 Feb 1989

5340-12-314-5092
Spacing Threaded Standoff

123145092
PAN5170-08-060: RNCC: 3 | RNVC: 2

14 Jul 1988

5340-12-314-9021
Belt-Strap Keeper

123149021
160-26283-07: RNCC: 3 | RNVC: 2
160-26283-07: RNCC: 5 | RNVC: 9

25 Aug 1988

5340-12-362-0713
Mounting Bracket

123620713
J27420215-405: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-365-5934
Mounting Bracket

123655934
J53230212-404: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-383-9626
Caster Set

123839626
S80023-00: RNCC: 3 | RNVC: 2

29 Dec 2010

5340-12-176-6132
Electronic Equipment Hardware Kit

121766132
5801479-3260: RNCC: 2 | RNVC: 2
5801479-3260: RNCC: 3 | RNVC: 2
5801479-3260: RNCC: 3 | RNVC: 2
5801479-3260: RNCC: 5 | RNVC: 9
5801479-3260: RNCC: 5 | RNVC: 9

11 Dec 1978

5340-12-322-3357
Suction Cup

123223357
1900116BW: RNCC: 3 | RNVC: 2
1.11.16116: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-374-6072
Angle Bracket

123746072
3537837-001: RNCC: 3 | RNVC: 2
3537837-001: RNCC: 5 | RNVC: 2

28 Feb 2008

5340-12-190-0593
Dust And Moisture Seal Protective Cap

121900593
65.7091.102.00A001: RNCC: 3 | RNVC: 2
283937: RNCC: 5 | RNVC: 2
65-7091-102-00A001: RNCC: 5 | RNVC: 2
65.7091.102.00-A001: RNCC: 5 | RNVC: 2

5 Nov 1981

5340-12-191-2522
Angle Bracket

121912522
2500058-130150.01: RNCC: 2 | RNVC: 2
2500058-130150.01: RNCC: 3 | RNVC: 2
2500058-130150.01: RNCC: 5 | RNVC: 2
2500058-130150-01: RNCC: 5 | RNVC: 9
2500058-130150.01: RNCC: 5 | RNVC: 9

20 Jan 1982

5340-12-184-9568
Butt Hinge Leaf

121849568
5801357-1711.01: RNCC: 2 | RNVC: 2
5801357-1711.01: RNCC: 3 | RNVC: 2
100000299: RNCC: 5 | RNVC: 9
5801357-1711-01: RNCC: 5 | RNVC: 9
5801357-1711-01: RNCC: 5 | RNVC: 9
5801357-1711-01: RNCC: 5 | RNVC: 9

28 Aug 1980

5340-12-349-2840
Butt Hinge Leaf

123492840
J52423524-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-392-3396
Catch Strike

123923396
V951L50-5BP: RNCC: 3 | RNVC: 2

28 May 2013

5340-12-158-7502
Helical Compression Spring Seat

121587502
8380750284: RNCC: 3 | RNVC: 2
4798768: RNCC: 5 | RNVC: 2
4798-768: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-334-6713
Access Cover

123346713
J230ZZ2E000-000: RNCC: 3 | RNVC: 2

8 Jun 1994

5340-12-303-6209
Nonmetallic Bumper

123036209
704-125160-903-3: RNCC: 3 | RNVC: 2

15 Apr 1985

5340-12-319-8412
Webbing Strap

123198412
4900288-330000.01: RNCC: 2 | RNVC: 2
4312 712 38690: RNCC: 3 | RNVC: 2

9 Nov 1989

5340-12-387-4669
Mounting Bracket

123874669
4790-0003: RNCC: 3 | RNVC: 2

21 Dec 2011

5340-12-327-5391
Flare Lock Fastener

123275391
12551: RNCC: 3 | RNVC: 2
02-2192: RNCC: 5 | RNVC: 2
0049886978: RNCC: 5 | RNVC: 2
721 1 66 211 1: RNCC: 5 | RNVC: 9

30 Jan 1992

5340-12-701-6376
Mounting Plate

127016376
VG95211-ML-127016376: RNCC: 2 | RNVC: 2
5.12.7070.1460.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-366-1086
Bow Handle

123661086
2500278-194600.000.0: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-701-6424
Angle Bracket

127016424
VG95211-ML-127016424: RNCC: 2 | RNVC: 2
5.12.7203.8030.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-2978
Dust And Moisture Seal Protective Plug

121872978
009-030.115-010: RNCC: 3 | RNVC: 2
009-030-115-010: RNCC: 5 | RNVC: 2
12790-112000.010: RNCC: 5 | RNVC: 2
12790-112000-010: RNCC: 5 | RNVC: 9
12790-112000-010: RNCC: 5 | RNVC: 9

26 Mar 1981

5340-12-387-9320
Mechanic Equipment Hardware Kit

123879320
260SET: RNCC: 3 | RNVC: 2
004015: RNCC: 5 | RNVC: 2
260-SET: RNCC: 5 | RNVC: 2

9 Feb 2012

5340-12-320-6707
Mounting Bracket

123206707
171-02/64445: RNCC: 2 | RNVC: 2
171-02/64445: RNCC: 3 | RNVC: 2
171-02/64445: RNCC: 5 | RNVC: 9

6 Feb 1990

5340-12-135-6507

5340-12-382-3613
Manual Control Lever

123823613
R900329704: RNCC: 3 | RNVC: 2
R907198095: RNCC: 5 | RNVC: 2

10 Jun 2010

5340-12-384-2211
Shimmy Damper

123842211
J3PUF05050C: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-12-356-5225
Manual Control Handle

123565225
21.08281.14: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-304-9577
Elastic Cord Assembly

123049577
6X160TAN15574: RNCC: 3 | RNVC: 2

10 Sep 1985

5340-12-346-1612
Manual Control Lever

123461612
10.0000.705: RNCC: 2 | RNVC: 2
10.0000.705: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-12-306-5905
Extension Drawer Slide

123065905
4760.0M86: RNCC: 3 | RNVC: 2
4760 0M 86: RNCC: 5 | RNVC: 2

12 Mar 1986

5340-12-312-2116
Angle Bracket

123122116
4900123-911000.26: RNCC: 3 | RNVC: 2
4900123-911000.26: RNCC: 5 | RNVC: 2
4900123-911000.26: RNCC: 5 | RNVC: 9

4 Dec 1987

5340-12-316-2902
Detent Plunger

123162902
6378709: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-302-1847
Retaining Strap

123021847
6175010220: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-193-2089
Shimmy Damper

121932089
1200037-1532: RNCC: 3 | RNVC: 2

30 Jun 1982

5340-12-361-4853
Angle Bracket

123614853
2854630671: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-191-8497
Angle Bracket

121918497
02497943: RNCC: 3 | RNVC: 2
2497943EE5091-29: RNCC: 5 | RNVC: 2

15 Mar 1982

5340-12-177-2520
Electrical-Mechanical Equipment Post

121772520
5801215-16115-010: RNCC: 3 | RNVC: 2
5801215-16115.010: RNCC: 5 | RNVC: 2

22 Jan 1979

5340-12-352-2202
Pad Eye

123522202
VG95211-ML-123522202: RNCC: 2 | RNVC: 2
160-88435: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-193-2915
Clamping Catch

121932915
V17L12-2X1AA: RNCC: 3 | RNVC: 2
BAZ2556: RNCC: 5 | RNVC: 2
3098800260: RNCC: 5 | RNVC: 2
V17L12-2X1AA: RNCC: 5 | RNVC: 2

7 Jul 1982

5340-12-199-6465
Electrical-Mechanical Equipment Post

121996465
3412028815: RNCC: 3 | RNVC: 2
5801943-0111.004: RNCC: 5 | RNVC: 2

18 May 1984

5340-12-311-1285
Dust And Moisture Seal Protective Plug

123111285
600B153: RNCC: 3 | RNVC: 2
GPN600B153: RNCC: 5 | RNVC: 2
GPN600B153: RNCC: 5 | RNVC: 2
600015300: RNCC: 5 | RNVC: 9
GPN600,B153: RNCC: 5 | RNVC: 9
85-693-3970: RNCC: 6 | RNVC: 9

28 Jul 1987

5340-12-176-3914
Butt Hinge Leaf

121763914
5801352-4300.11F: RNCC: 2 | RNVC: 2
5801352-4300.11F: RNCC: 3 | RNVC: 2
5801352-4300-11F: RNCC: 5 | RNVC: 2
5801352-4300-11F: RNCC: 5 | RNVC: 2
5801352-4300-11F: RNCC: 5 | RNVC: 9

27 Nov 1978

5340-12-172-8323
Hinge Torsion Bar

121728323
2500009-0000-09: RNCC: 3 | RNVC: 2
2500009-0000-09: RNCC: 5 | RNVC: 2
2500009-0000-09: RNCC: 5 | RNVC: 9
2500009-0000-09: RNCC: 5 | RNVC: 9

27 Feb 1978

5340-12-319-7166
Mounting Plate

123197166
6100125-1200.001: RNCC: 2 | RNVC: 2
4230010212: RNCC: 3 | RNVC: 2

27 Oct 1989

5340-12-190-7182
Mounting Bracket

121907182
NO PRIMARY REF 12-190-7182: RNCC: 3 | RNVC: 2
7536132869: RNCC: 5 | RNVC: 9
7536 132869: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-329-7827
Double Angle Bracket

123297827
5041272: RNCC: 3 | RNVC: 2
91640435: RNCC: 5 | RNVC: 2

26 Sep 1992

5340-12-195-4307
Resilient Mount

121954307
PAN5177T03: RNCC: 3 | RNVC: 2

24 Feb 1983

5340-12-304-7858
Double Angle Bracket

123047858
0224 2679: RNCC: 3 | RNVC: 2
02242679EE0148-29: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-181-2396
Spring Tension Clip

121812396
81974010485: RNCC: 3 | RNVC: 2
5000080241: RNCC: 5 | RNVC: 2

5 Nov 1979

5340-12-330-0184
Loop Clamp

123300184
LN9491BK11: RNCC: 2 | RNVC: 2

22 Oct 1992

5340-12-165-6940
Handrad

5340-12-165-9646
Elek Gewindezapfen

5340-12-358-5887
Angle Bracket

123585887
J92228087-001: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-353-9740
Sliding Stay

123539740
590619-0451.000: RNCC: 3 | RNVC: 2
590619-0451.000: RNCC: 5 | RNVC: 2
590619-0451.000: RNCC: 5 | RNVC: 9

23 May 2001

5340-12-310-9924
Access Cover

123109924
NGE 108-2500.004: RNCC: 3 | RNVC: 2

16 Jul 1987

5340-12-371-2748
Retaining Strap

123712748
SK795-850600.021.0: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-12-301-8897
Nonmetallic Solid Wheel

123018897
20-5010-028: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-385-2371
Spring Tension Clip

123852371
F1.1643-47-01-30.00-00: RNCC: 3 | RNVC: 2

12 May 2011

5340-12-335-8631
Multiple Angle Bracket

123358631
81517100915: RNCC: 3 | RNVC: 2
81.51710-0915: RNCC: 5 | RNVC: 2
81.51710.0915: RNCC: 5 | RNVC: 2

26 Sep 1994

5340-12-321-4940
Mounting Plate

123214940
5802106-201111.00: RNCC: 2 | RNVC: 2
5802106-201111.00: RNCC: 5 | RNVC: 9

23 May 1990

5340-12-331-0232
Extension Drawer Slide

123310232
5003-24": RNCC: 3 | RNVC: 2

12 Mar 1993

5340-12-300-9167
Retaining Band

123009167
3097230420: RNCC: 3 | RNVC: 2

12 Sep 1984

5340-12-356-0915
Mounting Bracket

123560915
4616830314: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-380-0747
Angle Bracket

123800747
5225460043: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-12-166-6753
Buckle

121666753
21VG4858: RNCC: 2 | RNVC: 2

5 Oct 1976

5340-12-330-2948
Mounting Bracket

123302948
160-75840: RNCC: 3 | RNVC: 2
160-75840: RNCC: 5 | RNVC: 9

27 Nov 1992

5340-12-366-7755
Dust And Moisture Seal Protective Cap

123667755
CBD32504P04: RNCC: 3 | RNVC: 2

7 Jun 2005

5340-12-193-8726
Double Angle Bracket

121938726
5544115: RNCC: 3 | RNVC: 2
554.4115: RNCC: 5 | RNVC: 2

8 Sep 1982

5340-12-091-4892

5340-12-145-5448

5340-12-700-1975
Dust And Moisture Seal Protective Cap

127001975
51-260446054: RNCC: 2 | RNVC: 2
765-17-29: RNCC: 3 | RNVC: 2

5 Nov 1991

5340-12-340-1343
Nonmetallic Bumper

123401343
DIN95364-F30X36-M8X10-CR60ST: RNCC: 2 | RNVC: 2
552001-30X36-M9X10.CR60.ST: RNCC: 5 | RNVC: 2
MZA B0 01: RNCC: 5 | RNVC: 2

2 Mar 1996

5340-12-198-1918
Dust And Moisture Seal Protective Cap

121981918
1420505035: RNCC: 3 | RNVC: 2
0130 7788: RNCC: 5 | RNVC: 2
K0.00130-7788: RNCC: 5 | RNVC: 2
K0001307788: RNCC: 5 | RNVC: 2
1420505035: RNCC: 5 | RNVC: 2
VDPM00712: RNCC: 5 | RNVC: 2

28 Dec 1983

5340-12-310-5333
Mending Plate

123105333
53.3031.061.05: RNCC: 3 | RNVC: 2
5800416-0551.001: RNCC: 3 | RNVC: 2
53.3031.061.05: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-336-9991
Mending Plate

123369991
2300002-063810.001: RNCC: 2 | RNVC: 2
2300002-063810.001: RNCC: 5 | RNVC: 2
9856330: RNCC: 5 | RNVC: 9
2300002-063810.001: RNCC: 5 | RNVC: 9

9 Jan 1995

5340-12-349-4620
Manual Control Lever

123494620
9703100173: RNCC: 3 | RNVC: 2

17 Nov 1999

5340-12-318-3861
Kunst Gleitschiene

123183861
54.0061.100.03: RNCC: 3 | RNVC: 2

10 Jul 1989

5340-12-367-6814
Access Cover

123676814
2306065: RNCC: 3 | RNVC: 2

23 Sep 2005

5340-12-320-9471
Retaining Strap

123209471
46711237759: RNCC: 3 | RNVC: 2

8 Mar 1990

5340-12-010-8505

5340-12-308-7288
Threaded End Tensioning Tie Rod

123087288
A11A572410021N1: RNCC: 3 | RNVC: 2

11 Nov 1986

5340-12-312-4348
Swivel Caster

123124348
367A32C150BZGD: RNCC: 3 | RNVC: 2

6 Jan 1988

5340-12-378-9063
Manual Control Handle

123789063
XP53518300007: RNCC: 3 | RNVC: 2

27 May 2009

5340-12-318-5839
Nonmetallic Bumper

123185839
4357437214: RNCC: 3 | RNVC: 2
4357437214: RNCC: 5 | RNVC: 2

31 Jul 1989

5340-12-317-0545
Nut And Bolt Locking Plate

123170545
3584210173: RNCC: 3 | RNVC: 2

7 Mar 1989

5340-12-362-3942
Mending Plate

123623942
DPA1X: RNCC: 3 | RNVC: 2

17 Feb 2004

5340-12-195-3513
Strap Hinge

121953513
3227200237: RNCC: 3 | RNVC: 2

9 Feb 1983

5340-12-195-2413
Retaining Strap

121952413
BSN2X10X20X2: RNCC: 3 | RNVC: 2
4730001533: RNCC: 5 | RNVC: 2
1215 1688: RNCC: 5 | RNVC: 2
5220000010: RNCC: 5 | RNVC: 2

27 Jan 1983

5340-12-176-1939
Loop Clamp

121761939
PAN4231J2828: RNCC: 3 | RNVC: 2

13 Nov 1978

5340-12-317-4635
Mounting Bracket

123174635
P-145552-002: RNCC: 3 | RNVC: 2
P145552-002: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-12-328-9476
Protection Bellows

123289476
70571111501C: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-318-6408
Nonmetallic Bumper

123186408
852721: RNCC: 3 | RNVC: 9

2 Aug 1989

5340-12-151-8884
Butt Hinge

121518884
4049220051: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-392-8057
Mounting Bracket

123928057
4075450540: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-12-384-5809
Clamping Catch

123845809
50104508: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-12-176-4900
Butt Hinge Leaf

121764900
WW 306 066 BR: RNCC: 2 | RNVC: 2
WW 306 066 BR: RNCC: 3 | RNVC: 9
WW 306 066 AR: RNCC: 5 | RNVC: 2
WW 306 066 BR: RNCC: 5 | RNVC: 2
WW306066AR: RNCC: 5 | RNVC: 2
WW 306 066 AR: RNCC: 5 | RNVC: 9
WW306066AR: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-188-7711
Retaining Band

121887711
2300109-030012.000.0: RNCC: 2 | RNVC: 2
2300109-030012.000.0: RNCC: 3 | RNVC: 2
2300109-030012-000-0: RNCC: 5 | RNVC: 2
2300109-030012-000-0: RNCC: 5 | RNVC: 2
2300109-030012.000.0: RNCC: 5 | RNVC: 2
2300109-030012-000-0: RNCC: 5 | RNVC: 9
2300109-030012.000.0: RNCC: 5 | RNVC: 9

29 Jul 1981

5340-12-305-1119
Angle Bracket

123051119
4900059-111221.007.0: RNCC: 3 | RNVC: 2
1225655: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-315-9568
Loop Clamp

123159568
DIN71555-60,5ZN: RNCC: 2 | RNVC: 2
DIN71555-60,5ZN: RNCC: 3 | RNVC: 2
06.67042.0113: RNCC: 5 | RNVC: 2
06670420113: RNCC: 5 | RNVC: 2
DIN71555-60,5-FE/ZN: RNCC: 5 | RNVC: 2
DIN71555-60,5-VERZINKT: RNCC: 5 | RNVC: 2

9 Dec 1988

5340-12-183-9620
Mending Plate

121839620
333004-1009.000: RNCC: 2 | RNVC: 2
333004-1009.000: RNCC: 3 | RNVC: 2
1255-10000.009: RNCC: 5 | RNVC: 2
1255-01.10: RNCC: 5 | RNVC: 9
1255-10000-009: RNCC: 5 | RNVC: 9
1255-10000-009: RNCC: 5 | RNVC: 9
1255-10000.009: RNCC: 5 | RNVC: 9
1255-01-10: RNCC: 5 | RNVC: 9
1255-10000.009: RNCC: 5 | RNVC: 9
333004-1009.000: RNCC: 5 | RNVC: 9

7 Jun 1980

5340-12-340-3258
Multiple Angle Bracket

123403258
87-401.00-00.23-00: RNCC: 3 | RNVC: 2

26 Mar 1996

5340-12-318-7424
Bow Handle

123187424
C41107-A462-B16: RNCC: 3 | RNVC: 2

14 Aug 1989

5340-12-332-4607
Lock-Release Lever

123324607
GN300-63-M6-16-SW: RNCC: 3 | RNVC: 2

12 Aug 1993

5340-12-316-7507
Angle Bracket

123167507
1000192-02 0 40000.04: RNCC: 2 | RNVC: 2
1000192-02 0 40000.04: RNCC: 3 | RNVC: 2
1000192-02040000.04: RNCC: 5 | RNVC: 9
1000192-02040000.04: RNCC: 5 | RNVC: 9
1000192-02040000.04: RNCC: 5 | RNVC: 9
1000192-02 0 40000.04: RNCC: 5 | RNVC: 9

8 Feb 1989

5340-12-349-7850
Angle Bracket

123497850
FAST-201310.01: RNCC: 2 | RNVC: 2
FAST-201310.01: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-197-8182
Plug Button

121978182
5801392-1011.017: RNCC: 3 | RNVC: 2
5801392-1011-017: RNCC: 5 | RNVC: 2
5801392-1011.017: RNCC: 5 | RNVC: 9

24 Nov 1983

5340-12-384-6975
Half Grooved Segment

123846975
F1.1781-30-01-20.00-00: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-12-317-5461
Double Angle Bracket

123175461
C320-A75-B12: RNCC: 3 | RNVC: 2

18 Apr 1989

5340-12-195-6395
Flare Lock Fastener

121956395
21100-303: RNCC: 3 | RNVC: 2
60807-006: RNCC: 5 | RNVC: 2

22 Mar 1983

5340-12-343-2267
Dust And Moisture Seal Protective Cap

123432267
229-041: RNCC: 3 | RNVC: 2

21 May 1997

5340-12-700-1918
Double Angle Bracket

127001918
51-260362010: RNCC: 2 | RNVC: 2
765-14-SB130: RNCC: 3 | RNVC: 2

4 Nov 1991

5340-12-386-3745
Mounting Plate

123863745
75549: RNCC: 3 | RNVC: 2
KB75549-992: RNCC: 5 | RNVC: 2

29 Aug 2011

5340-12-376-4372
Mounting Bracket

123764372
J28630017-406: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-12-328-4801
Ball Socket Seat

123284801
4607400614: RNCC: 3 | RNVC: 2
460 740 06 14: RNCC: 5 | RNVC: 2

22 May 1992

5340-12-340-5470
Angle Bracket

123405470
5901501073: RNCC: 3 | RNVC: 2
5901501073: RNCC: 5 | RNVC: 2
5901501073: RNCC: 5 | RNVC: 2
590 150 10 73: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-352-1464
Mounting Bracket

123521464
5205297: RNCC: 3 | RNVC: 2

20 Oct 2000

5340-12-303-5778
Angle Bracket

123035778
52.0261.901.07: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-339-0517
Mounting Plate

123390517
4615253939: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-385-4662
Access Cover

123854662
8591810050: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-12-125-2488

5340-12-347-9512
Mounting Plate

123479512
54.0058.570.13: RNCC: 2 | RNVC: 2
54.0058.570.13: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-12-348-5555
Retaining Strap

123485555
1079601: RNCC: 3 | RNVC: 2

16 Jul 1999

5340-12-191-8963
Resilient Mount

121918963
PAN5175T04: RNCC: 3 | RNVC: 2

16 Mar 1982

5340-12-316-8276
Access Cover

123168276
2300279-9710.04: RNCC: 2 | RNVC: 2
2300279-9710.04: RNCC: 3 | RNVC: 2
2300279-9710.04: RNCC: 5 | RNVC: 9
9871548: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-326-9122
Mounting Plate

123269122
427012U: RNCC: 3 | RNVC: 2
427012: RNCC: 5 | RNVC: 2
427012: RNCC: 5 | RNVC: 2

7 Nov 1991

5340-12-368-0737
Angle Bracket

123680737
7801044390AA: RNCC: 3 | RNVC: 2

1 Dec 2005

5340-12-148-2080
Retaining Strap

121482080
81974010453: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-335-4330
Catch Strike

123354330
52.0099.510.03: RNCC: 2 | RNVC: 2
52.0099.510.03: RNCC: 3 | RNVC: 2

18 Aug 1994

5340-12-010-4298

5340-12-177-3711
Retaining Strap

121773711
RR2646: RNCC: 3 | RNVC: 2
164-74-07: RNCC: 5 | RNVC: 2
23782: RNCC: 5 | RNVC: 2

29 Jan 1979

5340-12-301-8881
Angle Bracket

123018881
20-5220-089: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-325-9040
Turnbuckle Body

123259040
1000025-265110.06: RNCC: 2 | RNVC: 2
1000025-265110.06: RNCC: 3 | RNVC: 2
1000025-265110.06: RNCC: 5 | RNVC: 9

22 Jul 1991

5340-12-193-7590
Leather Strap

121937590
4217700085: RNCC: 3 | RNVC: 2

26 Aug 1982

5340-12-319-4799
Access Cover

123194799
504170: RNCC: 3 | RNVC: 2

5 Oct 1989

5340-12-342-5738
Access Cover

123425738
4110610133: RNCC: 3 | RNVC: 2
4110010133: RNCC: 5 | RNVC: 2

28 Feb 1997

5340-12-300-2256
Retaining Strap

123002256
7066401: RNCC: 3 | RNVC: 2

14 Jul 1984

5340-12-301-7017
Lock-Release Lever

123017017
116 015: RNCC: 3 | RNVC: 2
112001: RNCC: 5 | RNVC: 2
116 015: RNCC: 5 | RNVC: 2
116015: RNCC: 5 | RNVC: 2
112001: RNCC: 5 | RNVC: 9
116 015: RNCC: 5 | RNVC: 9
116015: RNCC: 5 | RNVC: 9

3 Nov 1984

5340-12-177-3409
Strap Fastener Loop

121773409
6030027: RNCC: 3 | RNVC: 2

29 Jan 1979

5340-12-300-2805
Resilient Mount

123002805
3093100277: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-357-2651
Flange Protector

123572651
2500261-030120.000.0: RNCC: 2 | RNVC: 2
2500261-030120.000.0: RNCC: 3 | RNVC: 2

28 May 2002

5340-12-196-2169
Lock-Release Lever

121962169
009-078.157-001: RNCC: 2 | RNVC: 2
009-078.157-001: RNCC: 3 | RNVC: 2

13 Jun 1983

5340-12-305-9747
Loop Clamp

123059747
DIN3016-1-A1-61X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-61X20-W1-2: RNCC: 3 | RNVC: 2
RS1.61/20: RNCC: 3 | RNVC: 2
04110020061: RNCC: 5 | RNVC: 2
4110020061: RNCC: 5 | RNVC: 2
RS1100-61-20: RNCC: 5 | RNVC: 2
DIN3016-A1-61X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-A61X20-W1: RNCC: 5 | RNVC: 9

15 Jan 1986

5340-12-196-9487
Mending Plate

121969487
4900059-733120.000.0: RNCC: 3 | RNVC: 2
4900059-733120-000-0: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-315-4531
Webbing Strap

123154531
DAN80-3-150: RNCC: 3 | RNVC: 2
DAN80-3-150: RNCC: 3 | RNVC: 2

26 Oct 1988

5340-12-700-3205
Spring Holder

127003205
51-200736084: RNCC: 2 | RNVC: 2
2A28-SB3-7: RNCC: 3 | RNVC: 2

12 Dec 1991

5340-12-340-8775
Runner

123408775
2500099-180000.008.0: RNCC: 2 | RNVC: 2
408-11.08.218-17: RNCC: 3 | RNVC: 2
408-11.08.218-17D: RNCC: 5 | RNVC: 2
408-11.08.218-17: RNCC: 5 | RNVC: 9

26 Jun 1996

5340-12-358-0110
Loop Clamp

123580110
DIN3016-1-D1-10X15-W5-NBR: RNCC: 2 | RNVC: 2
DIN3016-1-D1-10X15-W5: RNCC: 5 | RNVC: 9
VG95931-D10X15-W5: RNCC: 5 | RNVC: 9

2 Sep 2002

5340-12-359-4570
Mounting Bracket

123594570
KS6034: RNCC: 3 | RNVC: 2
81157400003: RNCC: 5 | RNVC: 2
81.15740-0003: RNCC: 5 | RNVC: 9

6 Feb 2003

5340-12-702-6034
Loop Clamp

127026034
VG95211-ML-127026034: RNCC: 2 | RNVC: 2
5192A-25KD: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-300-0235
Electrical-Mechanical Equipment Post

123000235
C249-A31-C21: RNCC: 2 | RNVC: 2
C249-A31-C21: RNCC: 3 | RNVC: 2

27 Jun 1984

5340-12-315-8774
Door Handle

123158774
3817600559: RNCC: 3 | RNVC: 2
381 760 05 59: RNCC: 5 | RNVC: 2

3 Dec 1988

5340-12-163-7413
Loop Clamp

121637413
LN9491B8: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-379-0999
Spring Tension Clip

123790999
9007552A: RNCC: 3 | RNVC: 2

23 Jun 2009

5340-12-176-2559
Nonmetallic Bumper

121762559
803201245: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-342-1410
Retaining Strap

123421410
536A08011: RNCC: 3 | RNVC: 2
536A08011F1: RNCC: 5 | RNVC: 2

18 Dec 1996

5340-12-135-9853

5340-12-393-8129
Mounting Plate

123938129
066808: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-12-389-4872
Dust And Moisture Seal Protective Cap

123894872
H2638-S10: RNCC: 3 | RNVC: 2

12 Jul 2012

5340-12-306-0132
Retaining Strap

123060132
2506902: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-362-1565
Mounting Plate

123621565
5080600036: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-12-371-3200
Loop Clamp

123713200
0117 2635: RNCC: 3 | RNVC: 2

14 Mar 2007

5340-12-302-0388
Butt Hinge Leaf

123020388
3819770751: RNCC: 3 | RNVC: 2

28 Nov 1984

5340-12-358-1923
Manual Control Lever

123581923
14.20.21: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-12-386-9388
Mounting Bracket

123869388
X00030393: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-12-373-9555
Webbing Strap

123739555
2806-30000: RNCC: 3 | RNVC: 2

28 Dec 2007

5340-12-384-6709
Mechanical Stop

123846709
1558I80292: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-12-378-0010
Loop Clamp

123780010
41231088: RNCC: 3 | RNVC: 2

4 Mar 2009

5340-12-339-0358
Dust And Moisture Seal Protective Cap

123390358
0009873845: RNCC: 3 | RNVC: 2
2010083: RNCC: 5 | RNVC: 2

29 Sep 1995

5340-12-388-1942
Nut And Bolt Head Protective Cap

123881942
5000009700009: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-356-3288
Helical Compression Spring Seat

123563288
M384100: RNCC: 3 | RNVC: 9

14 Feb 2002

5340-12-337-8244
Angle Bracket

123378244
731.42.203: RNCC: 3 | RNVC: 2
461 840 03 14: RNCC: 3 | RNVC: 2
4618400314: RNCC: 5 | RNVC: 2

19 Apr 1995

5340-12-325-1925
Nonmetallic Bumper

123251925
170X55X10.NBR70: RNCC: 3 | RNVC: 2
40011400: RNCC: 3 | RNVC: 2

14 May 1991

5340-12-302-1352
Angle Bracket

123021352
4900075-2310.01: RNCC: 2 | RNVC: 2
556-8202310.01: RNCC: 3 | RNVC: 2
4900075-2310.01: RNCC: 5 | RNVC: 2
4900075-2310-01: RNCC: 5 | RNVC: 9
4900075-2310.01: RNCC: 5 | RNVC: 9

6 Dec 1984

5340-12-180-8847
Angle Bracket

121808847
2500035-126000-00: RNCC: 2 | RNVC: 2
2500035-126000-00: RNCC: 5 | RNVC: 2
2500035-126000.00: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-305-3586
Door Handle

123053586
1000-U10: RNCC: 3 | RNVC: 2
0.26.0709.0: RNCC: 3 | RNVC: 2
200-9320: RNCC: 3 | RNVC: 2

25 Oct 1985

5340-12-349-7792
Manual Control Handle

123497792
5.321-379: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-12-380-0181
Loop Clamp

123800181
DIN3016-1-E2-30-30X20-W1-2-NBR: RNCC: 2 | RNVC: 2

18 Sep 2009

5340-12-702-5763
Mounting Bracket

127025763
VG95211-ML-127025763: RNCC: 2 | RNVC: 2
5.51.7801.0020.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-308-9077
Nonmetallic Bumper

123089077
1281/64156.01: RNCC: 2 | RNVC: 2
087-03/60199: RNCC: 3 | RNVC: 2
087-03/60199: RNCC: 5 | RNVC: 9

27 Nov 1986

5340-12-342-7413
Mounting Bracket

123427413
1207 0938: RNCC: 3 | RNVC: 2
12070938UC0111-90: RNCC: 5 | RNVC: 2
3-601-9-600-003-5: RNCC: 5 | RNVC: 9
3.601.9.600.003.5: RNCC: 5 | RNVC: 9

24 Mar 1997

5340-12-333-5168
T Bracket

123335168
5802017-000000.30: RNCC: 2 | RNVC: 2
5802017-000000.30: RNCC: 3 | RNVC: 2

29 Dec 1993

5340-12-363-5759
Rim Lock

123635759
1591 30002: RNCC: 3 | RNVC: 2

6 Jul 2004

5340-12-383-0106
Mechanic Equipment Hardware Kit

123830106
9219687: RNCC: 3 | RNVC: 2

2 Sep 2010

5340-12-140-7940
Hand Crank

121407940
BHAA002: RNCC: 3 | RNVC: 2
K0006.090: RNCC: 5 | RNVC: 2
KLP HK 160.00: RNCC: 5 | RNVC: 2
K2061.039: RNCC: 5 | RNVC: 2
K6090: RNCC: 5 | RNVC: 2
KMR HK 160.100: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-358-9195
Mounting Bracket

123589195
3805400573: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-319-7710
Nonmetallic Bumper

123197710
64 025 018A: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-12-164-5660

5340-12-040-0318

5340-12-339-3776
Access Cover

123393776
4116616789: RNCC: 3 | RNVC: 2

16 Nov 1995

5340-12-366-9719
Mounting Bracket

123669719
BD5.250.863.230: RNCC: 3 | RNVC: 2

27 Jun 2005

Load More Results