What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 40 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 40 of 178

5340-12-343-2429
Nonmetallic Bumper

123432429
2513: RNCC: 3 | RNVC: 2

22 May 1997

5340-12-341-6352
Double Angle Bracket

123416352
2904 830 M1: RNCC: 3 | RNVC: 2
2904830M1: RNCC: 5 | RNVC: 2
395935338: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-12-382-2343
Buckle

123822343
761188NM: RNCC: 3 | RNVC: 2

26 May 2010

5340-12-301-7540
Dust And Moisture Seal Protective Cap

123017540
01TC34627: RNCC: 3 | RNVC: 2

7 Nov 1984

5340-12-363-6783
Angle Bracket

123636783
2500246-981000.03: RNCC: 2 | RNVC: 2
2500246-981000.03: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-12-360-3731
Dust And Moisture Seal Protective Cap

123603731
0009626510: RNCC: 3 | RNVC: 2
0009626510: RNCC: 5 | RNVC: 2

14 May 2003

5340-12-388-5337
Mounting Plate

123885337
5841750239: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-12-351-5235
Dust And Moisture Seal Protective Plug

123515235
700M24 RAL9005: RNCC: 3 | RNVC: 2
GPN700M24 SCHWARZ: RNCC: 5 | RNVC: 2

1 Aug 2000

5340-12-332-1295
Flush Lock

123321295
1H4839016A: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-391-2500
Mounting Bracket

123912500
T6270: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-12-196-2531
Resilient Mount

121962531
00739301: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-377-3469
Angle Bracket

123773469
08188616: RNCC: 3 | RNVC: 2

12 Jan 2009

5340-12-306-2855

5340-12-331-7660
Butt Hinge

123317660
10340301: RNCC: 2 | RNVC: 2
10340301: RNCC: 3 | RNVC: 2
GZ103403: RNCC: 5 | RNVC: 2

18 Jun 1993

5340-12-308-7940
Dust And Moisture Seal Protective Plug

123087940
620U19B: RNCC: 3 | RNVC: 2
620001900: RNCC: 5 | RNVC: 9
GPN620,U19B: RNCC: 5 | RNVC: 9

18 Nov 1986

5340-12-192-3029
Angle Bracket

121923029
4603170236: RNCC: 3 | RNVC: 2

13 Apr 1982

5340-12-312-7715
Angle Bracket

123127715
108967: RNCC: 3 | RNVC: 2

3 Feb 1988

5340-12-150-7209

5340-12-010-4340

5340-12-334-8787
Nonmetallic Bumper

123348787
5840900322: RNCC: 3 | RNVC: 2
5840900743: RNCC: 5 | RNVC: 9
584 090 07 43: RNCC: 5 | RNVC: 9

30 Jun 1994

5340-12-360-9952
Headless Straight Rod

123609952
0853 9350.075: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-342-8944
Shock Mount Pad

123428944
SH0.090.004.101: RNCC: 3 | RNVC: 2

14 Apr 1997

5340-12-360-3264
Mounting Plate

123603264
3514411305: RNCC: 3 | RNVC: 2
3514411305: RNCC: 5 | RNVC: 2

8 May 2003

5340-12-311-8436
Access Cover

123118436
2300074-5500.05: RNCC: 2 | RNVC: 2
2300074-5500.05: RNCC: 3 | RNVC: 2
2300074-5500.05: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-342-6605
Mounting Bracket

123426605
4205651541: RNCC: 3 | RNVC: 2
4205011541: RNCC: 5 | RNVC: 2

12 Mar 1997

5340-12-361-4755
Mounting Bracket

123614755
059028: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-167-6688
Angle Bracket

121676688
3575889: RNCC: 3 | RNVC: 2

12 Jan 1977

5340-12-134-2828
Rod End Clevis

121342828
B112: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-384-6015
Elastic Strap

123846015
200.0505.06.00.00: RNCC: 3 | RNVC: 2

11 Mar 2011

5340-12-321-4956
Lock-Release Lever

123214956
0000 1026 058: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-323-5427
Filler Opening Cap

123235427
0004316933: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-12-092-0455

5340-12-151-1198
Dust And Moisture Seal Protective Cap

121511198
196A26002/1: RNCC: 3 | RNVC: 2
8200160033-45: RNCC: 5 | RNVC: 2
196A26002: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-301-2288
Loop Clamp

123012288
DIN71555-100,5-PHOSPHATIERT: RNCC: 2 | RNVC: 2
100,5/71555PH: RNCC: 3 | RNVC: 2
DIN71555-100,5-PHOSPHATIERT: RNCC: 3 | RNVC: 2
5500200100: RNCC: 5 | RNVC: 2
071555100500: RNCC: 5 | RNVC: 9

28 Sep 1984

5340-12-376-8075
Helical Compression Spring Retainer

123768075
28200750084/0: RNCC: 3 | RNVC: 2
28200750084: RNCC: 5 | RNVC: 2

10 Nov 2008

5340-12-332-5640
Resilient Mount

123325640
DIN95363-A25X30-M6X18-NR55ST: RNCC: 2 | RNVC: 2
500029-M6X18.NR55.ST: RNCC: 5 | RNVC: 2
213338-7: RNCC: 5 | RNVC: 2
5484.9020: RNCC: 5 | RNVC: 2
VG95363-A25X30-M6X18-NR55ST: RNCC: 5 | RNVC: 9

20 Aug 1993

5340-12-372-3555
Spring Tension Clip

123723555
03.9305-1029.0/02: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-12-307-3752
Electrical-Mechanical Equipment Post

123073752
431271223801: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-12-316-9655
Loop Clamp

123169655
3520181840: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-042-1175

5340-12-332-1294
Flush Lock

123321294
1H1837015A: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-152-0488
Strap Fastener Loop

121520488
23111-9869-00: RNCC: 2 | RNVC: 2
23111-9869.00: RNCC: 2 | RNVC: 2
23111-9869-00: RNCC: 3 | RNVC: 2
23111-9869-00: RNCC: 5 | RNVC: 9
23111-9869-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-0914
Angle Bracket

121990914
5800659-1020.02: RNCC: 2 | RNVC: 2
5800659-1020-02: RNCC: 5 | RNVC: 9

24 Mar 1984

5340-12-321-4000
Double Angle Bracket

123214000
P-086261-006: RNCC: 3 | RNVC: 2
P-086417-006: RNCC: 5 | RNVC: 2
P086261-006: RNCC: 5 | RNVC: 2
P086417-006: RNCC: 5 | RNVC: 2

16 May 1990

5340-12-318-8796
Electronic Equipment Hardware Kit

123188796
870/001-120: RNCC: 3 | RNVC: 2
870/001-120: RNCC: 5 | RNVC: 2

22 Aug 1989

5340-12-166-7821
Loop Clamp

121667821
22025-015: RNCC: 3 | RNVC: 2
H10P: RNCC: 3 | RNVC: 2
5L.3821.002.46: RNCC: 5 | RNVC: 2
5800583-096190.070: RNCC: 5 | RNVC: 2
5L.3821.002.46: RNCC: 5 | RNVC: 2
211-60109: RNCC: 5 | RNVC: 2
5800583-096190-070: RNCC: 5 | RNVC: 2
5L3821-002-46: RNCC: 5 | RNVC: 2
203010102: RNCC: 5 | RNVC: 9
22 025-015: RNCC: 5 | RNVC: 9

21 Oct 1976

5340-12-387-6281
Mounting Bracket

123876281
9999261-752000.002.0: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-12-340-1335
Ball Socket Seat

123401335
124 218-00(3): RNCC: 3 | RNVC: 2
0008050090: RNCC: 5 | RNVC: 2
124218-00: RNCC: 5 | RNVC: 2
124218-00: RNCC: 5 | RNVC: 2
124 218-00: RNCC: 5 | RNVC: 9
124 218-00(3): RNCC: 5 | RNVC: 9
SK-B 3016: RNCC: 5 | RNVC: 9

2 Mar 1996

5340-12-375-1404
Manual Control Lever

123751404
129304: RNCC: 3 | RNVC: 2
129304: RNCC: 5 | RNVC: 2

24 Apr 2008

5340-12-317-2021
Strapping Seal

123172021
119: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-317-2991
Nonmetallic Bumper

123172991
3229871940: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-173-3561
Helical Compression Spring Seat

121733561
01TC30119: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-12-183-5885
Angle Bracket

121835885
CF 414 840: RNCC: 2 | RNVC: 2
CF 414 840: RNCC: 3 | RNVC: 2
CF414840: RNCC: 5 | RNVC: 2
CF 414 840: RNCC: 5 | RNVC: 2
CF414840: RNCC: 5 | RNVC: 2
CF 414 840: RNCC: 5 | RNVC: 2
CF414840: RNCC: 5 | RNVC: 2

3 May 1980

5340-12-374-3374
Door Button

123743374
2006871: RNCC: 3 | RNVC: 2

8 Feb 2008

5340-12-191-0503
Leather Strap

121910503
CF 339 324 AU: RNCC: 3 | RNVC: 2
CF 339 324 AU: RNCC: 5 | RNVC: 2

7 Jan 1982

5340-12-147-4935

5340-12-169-1856
Detent Plunger

121691856
8375205: RNCC: 3 | RNVC: 2

20 Apr 1977

5340-12-388-6668
Mounting Bracket

123886668
K42018031: RNCC: 3 | RNVC: 2

11 Apr 2012

5340-12-359-8899
Support Hook

123598899
M25739: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-12-360-0990
Mounting Bracket

123600990
9424295768: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-310-5350
Mending Plate

123105350
78203 59213: RNCC: 2 | RNVC: 2
7820359213: RNCC: 3 | RNVC: 2
78203 59213: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-196-3840
Mending Plate

121963840
66.3851.550.02-A001: RNCC: 3 | RNVC: 2
299385: RNCC: 5 | RNVC: 2

4 Jul 1983

5340-12-348-0885
Nonmetallic Bumper

123480885
78208 23019: RNCC: 2 | RNVC: 2
7820823019: RNCC: 3 | RNVC: 2
78208 23019: RNCC: 5 | RNVC: 9

13 Apr 1999

5340-12-361-4619
Angle Bracket

123614619
63706-903: RNCC: 3 | RNVC: 2

6 Oct 2003

5340-12-355-3991
Mounting Bracket

123553991
4615455940: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-340-6925
Mounting Bracket

123406925
8452631320: RNCC: 3 | RNVC: 2
84526 31320: RNCC: 5 | RNVC: 9

24 May 1996

5340-12-343-1875
Nut And Bolt Locking Plate

123431875
7970888: RNCC: 3 | RNVC: 2

15 May 1997

5340-12-386-2126
Track Stop

123862126
2500262-194210.001.0: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-702-4506
Mounting Bracket

127024506
VG95211-ML-127024506: RNCC: 2 | RNVC: 2
5.51.0602.1502.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-366-3862
Mounting Plate

123663862
1030055-060000.003.0: RNCC: 3 | RNVC: 2

19 Apr 2005

5340-12-313-7222
Nonmetallic Bumper

123137222
59007301: RNCC: 3 | RNVC: 2
KE82/80KERN-A-QUAL2150KOMPLETT: RNCC: 3 | RNVC: 2
42045058ED5046-04: RNCC: 5 | RNVC: 2
80.179.FKE.1K.3: RNCC: 5 | RNVC: 2
KE82/80 KERNA KOMPLETT SOFL560: RNCC: 5 | RNVC: 2
42045058: RNCC: 5 | RNVC: 2
KE82/80KERNAKOMPLETTSOFL560: RNCC: 5 | RNVC: 2

28 Apr 1988

5340-12-124-1196
Loop Clamp

121241196
DIN71555-73,5-PHOSPHATIERT: RNCC: 2 | RNVC: 2
DIN71555-73,5-PHOSPHATIERT: RNCC: 3 | RNVC: 2
73,5/71555PH: RNCC: 3 | RNVC: 2
DIN71555-73-5PH0SPHATIERT: RNCC: 5 | RNVC: 2
73-5DIN71555PH0SPHATIERT: RNCC: 5 | RNVC: 2
73-5DIN71555PHRE: RNCC: 5 | RNVC: 2
DIN71555-73-5PH0SPHATIERT: RNCC: 5 | RNVC: 2
5500200073: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-318-5701
Electrical-Mechanical Equipment Post

123185701
VG95148B5XM3X15-2.0380.30-E2A: RNCC: 2 | RNVC: 2
VG95148B5XM3X15-2.0380.30-E2A: RNCC: 3 | RNVC: 2
V5634L/E: RNCC: 3 | RNVC: 2
617-007: RNCC: 5 | RNVC: 2
V5634L/E: RNCC: 5 | RNVC: 9

28 Jul 1989

5340-12-193-2028
Plug Button

121932028
3390522155: RNCC: 3 | RNVC: 2
0008243572: RNCC: 5 | RNVC: 2
721 2 85 256 1: RNCC: 5 | RNVC: 9

30 Jun 1982

5340-12-361-5707
Swivel Caster

123615707
1.350.037.9: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-12-331-1615
Dust And Moisture Seal Protective Plug

123311615
88.1.607.3391: RNCC: 3 | RNVC: 2
00.4.623.6216: RNCC: 5 | RNVC: 2

26 Mar 1993

5340-12-702-1986
Mounting Bracket

127021986
VG95211-ML-127021986: RNCC: 2 | RNVC: 2
30.7210.380: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-330-1841
Friction Catch

123301841
NO.1359-T73K: RNCC: 3 | RNVC: 2
1359-T73K: RNCC: 5 | RNVC: 2
430-31.20.01: RNCC: 5 | RNVC: 2
T73K: RNCC: 5 | RNVC: 2
1359: RNCC: 5 | RNVC: 9

11 Nov 1992

5340-12-143-4438

5340-12-347-7372
Mounting Bracket

123477372
98477145: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-12-194-3893
Strap Bolt

121943893
281827519: RNCC: 3 | RNVC: 2

28 Oct 1982

5340-12-172-3962
Door Handle

121723962
5800044: RNCC: 3 | RNVC: 2
601264: RNCC: 5 | RNVC: 2
45159: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-12-344-1920
Double Angle Bracket

123441920
2300387-250700.001: RNCC: 2 | RNVC: 2
2300387-250700.001: RNCC: 3 | RNVC: 2
2300387-250700.001: RNCC: 5 | RNVC: 9
9907853: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-12-391-0999
Clamping Catch

123910999
I010772: RNCC: 3 | RNVC: 2

5 Feb 2013

5340-12-184-1946
Resilient Mount

121841946
211261325A: RNCC: 3 | RNVC: 2

3 Jul 1980

5340-12-387-8642
Mounting Bracket

123878642
7094011: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-366-9712
Mounting Bracket

123669712
S252M3129101: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-310-9072
Access Cover

123109072
JJ55030: RNCC: 3 | RNVC: 2

8 Jul 1987

5340-12-321-5164
Nonmetallic Bumper

123215164
272.332.271: RNCC: 3 | RNVC: 2
272.332 271: RNCC: 5 | RNVC: 9

28 May 1990

5340-12-344-2561
Cremone Bolt

123442561
6000040: RNCC: 3 | RNVC: 2
600 0040: RNCC: 5 | RNVC: 2
BOF 20930: RNCC: 5 | RNVC: 2
600 0040: RNCC: 5 | RNVC: 2
STC2432: RNCC: 5 | RNVC: 2

8 Oct 1997

5340-12-312-0135
Loop Clamp

123120135
600899373: RNCC: 3 | RNVC: 2
81.61852.0018: RNCC: 5 | RNVC: 2
81618520018: RNCC: 5 | RNVC: 2

10 Nov 1987

5340-12-184-7223
Resilient Mount

121847223
CF 205 044 DR: RNCC: 3 | RNVC: 2
CF 205 044 DR: RNCC: 5 | RNVC: 2
CF205044CR: RNCC: 5 | RNVC: 2
CF205044CR: RNCC: 5 | RNVC: 2
CF205044DR: RNCC: 5 | RNVC: 2
CF205044DR: RNCC: 5 | RNVC: 2
CF 205 044 DR: RNCC: 5 | RNVC: 2

14 Aug 1980

5340-12-325-3729
Mounting Bracket

123253729
6418110226: RNCC: 3 | RNVC: 2

29 May 1991

5340-12-175-1269
Bow Handle

121751269
3817510170: RNCC: 3 | RNVC: 2

28 Aug 1978

5340-12-300-2725
Mending Plate

123002725
A11A313010281: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-043-2647

5340-12-344-6421

5340-12-382-6821
Retaining Strap

123826821
806276893: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-12-375-0519
Loop Clamp

123750519
902696401: RNCC: 3 | RNVC: 2

17 Apr 2008

5340-12-387-3526
Handwheel

123873526
10032070-BUND: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-12-382-2713
Mounting Bracket

123822713
X629999: RNCC: 3 | RNVC: 2

31 May 2010

5340-12-355-1096
Helical Compression Spring Retainer

123551096
4B42707: RNCC: 3 | RNVC: 2

9 Oct 2001

5340-12-092-0461

5340-12-330-4222
Catch Strike

123304222
100050241: RNCC: 3 | RNVC: 2
10 0050 241: RNCC: 5 | RNVC: 2

11 Dec 1992

5340-12-353-2154
Strap Hinge Leaf

123532154
19005374: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-196-1875
Electrical-Mechanical Equipment Post

121961875
5942770: RNCC: 3 | RNVC: 2

9 Jun 1983

5340-12-342-3259
Mechanic Equipment Hardware Kit

123423259
07130-65070: RNCC: 3 | RNVC: 2
07130-65070: RNCC: 5 | RNVC: 9

23 Jan 1997

5340-12-183-0540
Resilient Mount

121830540
0016543: RNCC: 3 | RNVC: 2
0016543: RNCC: 3 | RNVC: 2
16543-27094: RNCC: 5 | RNVC: 2

15 Mar 1980

5340-12-044-1565

5340-12-365-0675
Mounting Bracket

123650675
4618810412: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-384-4243
Clamping Catch

123844243
V951L04-1X5AGV: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-12-333-2475
Mending Plate

123332475
26-21C1029G001P49: RNCC: 3 | RNVC: 2

15 Nov 1993

5340-12-180-9466
Loop Clamp

121809466
9HV854394-00: RNCC: 3 | RNVC: 2

12 Oct 1979

5340-12-196-6816
Padlock

121966816
DIN7465-E1-50-BK-MIT HB 80MM: RNCC: 2 | RNVC: 2
85HB50-80: RNCC: 3 | RNVC: 2
116HB/50/80: RNCC: 3 | RNVC: 2

2 Jan 1986

5340-12-308-4764
Loop Clamp

123084764
038-0001-001-020: RNCC: 3 | RNVC: 2
81.95312.0024: RNCC: 5 | RNVC: 2
81953120024: RNCC: 5 | RNVC: 2
42489575: RNCC: 5 | RNVC: 2
0380001001020: RNCC: 5 | RNVC: 2

14 Oct 1986

5340-12-184-5583
Bow Handle

121845583
VG95149A100X22-M4AL-LQ-RAL9010: RNCC: 2 | RNVC: 2
5801341-1012-002: RNCC: 3 | RNVC: 2
5801341-1012.002: RNCC: 5 | RNVC: 2

31 Jul 1980

5340-12-171-7656
Resilient Mount

121717656
DIN95363-D30X30-M8X10-NR45ST: RNCC: 2 | RNVC: 2
505014-M8X10.NR45.ST: RNCC: 5 | RNVC: 2
4672521: RNCC: 5 | RNVC: 2
VG95363-D30X30-M8X10-NR45ST: RNCC: 5 | RNVC: 9

11 Nov 1977

5340-12-188-8376
Hinge Torsion Bar

121888376
105-21401.06: RNCC: 3 | RNVC: 2
105-21401-06: RNCC: 5 | RNVC: 2

3 Aug 1981

5340-12-154-7978
Loop Clamp

121547978
51.0290.115-07: RNCC: 3 | RNVC: 2
51-0290-115-07: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-189-2821
Handwheel

121892821
1281-16340: RNCC: 2 | RNVC: 2
1281-16340: RNCC: 3 | RNVC: 2
159498: RNCC: 5 | RNVC: 2
1281-16340: RNCC: 5 | RNVC: 9

16 Sep 1981

5340-12-354-8345
Rigid Caster

123548345
5400049-116812.06: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-316-4729
Case Corner

123164729
P-050763-003: RNCC: 3 | RNVC: 2
P050763-003: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-701-9740
Rod End Connector

127019740
VG95211-ML-127019740: RNCC: 2 | RNVC: 2
1-1-540 OST1 10232-71: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-700-2996
Access Cover

127002996
51-200701084: RNCC: 2 | RNVC: 2
2A28/2-3: RNCC: 3 | RNVC: 2
2A28-2-3: RNCC: 5 | RNVC: 9

4 Dec 1991

5340-12-301-1407
Rubber Bumper

123011407
251843312: RNCC: 3 | RNVC: 9

22 Sep 1984

5340-12-325-7570
Webbing Strap

123257570
79017/026-1800-0450: RNCC: 3 | RNVC: 2
79017/026-1800-0450: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-131-0626
Retaining Strap

121310626
3359034EE0144-15: RNCC: 3 | RNVC: 2
0144-15-03-01: RNCC: 5 | RNVC: 2
0335 9034: RNCC: 5 | RNVC: 2
3359034: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-362-0443
Nonmetallic Bumper

123620443
1119871740: RNCC: 3 | RNVC: 2

18 Dec 2003

5340-12-325-2276
Door Holder

123252276
C44.0351.00: RNCC: 3 | RNVC: 2
0007201716: RNCC: 5 | RNVC: 2

17 May 1991

5340-12-181-4092
Butt Hinge

121814092
DIN7956-60X2-1-4571BKU566: RNCC: 2 | RNVC: 2
C60X2X566DIN7956-1-4571: RNCC: 5 | RNVC: 2

22 Nov 1979

5340-12-318-6399
Nonmetallic Bumper

123186399
23305-189330.02.0: RNCC: 2 | RNVC: 2
23305-189330.02.0: RNCC: 3 | RNVC: 2

2 Aug 1989

5340-12-304-7680
Spring Tension Clip

123047680
704-125210-905-0: RNCC: 3 | RNVC: 2

20 Aug 1985

5340-12-188-7073
Dust And Moisture Seal Protective Cap

121887073
025-0490-000: RNCC: 3 | RNVC: 2

27 Jul 1981

5340-12-185-0487
Mending Plate

121850487
5801802-20200-02: RNCC: 2 | RNVC: 2
4780315-20200-02: RNCC: 5 | RNVC: 2
5801802-20200-02: RNCC: 5 | RNVC: 2
5801802-20200.02: RNCC: 5 | RNVC: 9

6 Sep 1980

5340-12-361-4692
Access Cover

123614692
009-221.475-000: RNCC: 2 | RNVC: 2
009-221.475-000: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-320-3107
Nonmetallic Bumper

123203107
DIN9835-PUR50X63X16: RNCC: 3 | RNVC: 2
662101310: RNCC: 3 | RNVC: 2
DIN9835-PUR50X63X16: RNCC: 5 | RNVC: 9

29 Dec 1989

5340-12-375-7906
Spacing Threaded Standoff

123757906
05.12.103: RNCC: 3 | RNVC: 2

4 Jul 2008

5340-12-165-6652
Nut And Bolt Locking Plate

121656652
114A34007: RNCC: 3 | RNVC: 2

11 Jun 1976

5340-12-145-8195
Butt Hinge

121458195
1170: RNCC: 3 | RNVC: 9
1170: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-393-7702
Spring Holder

123937702
1103658: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-174-9166
Flush Lock

121749166
6000137: RNCC: 3 | RNVC: 2
395944195: RNCC: 5 | RNVC: 9
395944195: RNCC: 5 | RNVC: 9

7 Aug 1978

5340-12-319-7626
Rod End Connector

123197626
297572: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-12-186-6639
Dust And Moisture Seal Protective Cap

121866639
873 094 0057: RNCC: 2 | RNVC: 2
8730940057: RNCC: 3 | RNVC: 2

26 Jan 1981

5340-12-361-7857
Loop Clamp

123617857
EN4114F18WH1: RNCC: 2 | RNVC: 2

18 Nov 2003

5340-12-130-1152

5340-12-361-9862
Casement Fastener

123619862
ZH 22.5-34: RNCC: 3 | RNVC: 2

12 Dec 2003

5340-12-700-8607
Threaded End Tensioning Tie Rod

127008607
VG95211-ML-127008607: RNCC: 2 | RNVC: 2
155N1221-28-1,5-700: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7545
Retaining Strap

127017545
VG95211-ML-127017545: RNCC: 2 | RNVC: 2
5.12.7616.8500.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-198-5805
Manual Control Handle

121985805
161.480.715: RNCC: 3 | RNVC: 2
7-505-2416: RNCC: 5 | RNVC: 2
161-480-715: RNCC: 5 | RNVC: 2

14 Feb 1984

5340-12-304-7885
Double Angle Bracket

123047885
2500103-122000.000.0: RNCC: 2 | RNVC: 2
2500103-122000.000.0: RNCC: 3 | RNVC: 2
2500103-122000.000.0: RNCC: 5 | RNVC: 2
2500103-122000.000.0: RNCC: 5 | RNVC: 9

26 Aug 1985

5340-12-349-6284
Leather Strap

123496284
160-26493-04: RNCC: 3 | RNVC: 2

9 Dec 1999

5340-12-354-4851
Dust And Moisture Seal Protective Cap

123544851
E31891-00: RNCC: 3 | RNVC: 2

18 Jul 2001

5340-12-359-9357
Dust And Moisture Seal Protective Cap

123599357
FO-41-509: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-310-3617
Angle Bracket

123103617
2300042-188106.004: RNCC: 2 | RNVC: 2
2300042-188106.004: RNCC: 3 | RNVC: 2
2300042-188106.004: RNCC: 5 | RNVC: 9

14 May 1987

5340-12-701-8494
Loop Clamp

127018494
VG95211-ML-127018494: RNCC: 2 | RNVC: 2
5191A-38: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-199-0304
Electrical-Mechanical Equipment Post

121990304
5801549-2149.002: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-12-322-8101
Plain Solid Disk

123228101
8470 032 159: RNCC: 3 | RNVC: 2
84700321159: RNCC: 5 | RNVC: 2
8470032159: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-191-2863
Lock-Release Lever

121912863
1238 307 428: RNCC: 3 | RNVC: 2
02961314: RNCC: 5 | RNVC: 2
1238307428: RNCC: 5 | RNVC: 2
0140318: RNCC: 5 | RNVC: 2
1238307428: RNCC: 5 | RNVC: 9
140318: RNCC: 5 | RNVC: 9

21 Jan 1982

5340-12-308-7661
Metal Runner

123087661
351271250081: RNCC: 3 | RNVC: 2

14 Nov 1986

5340-12-303-5781
Mending Plate

123035781
52.0261.500.02: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-190-8759
Helical Compression Spring Seat

121908759
2410320060: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-330-2107
Electrical-Mechanical Equipment Post

123302107
10290801: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-12-336-2837
Mechanical Stop

123362837
4620 333 070: RNCC: 3 | RNVC: 2
4620333070: RNCC: 5 | RNVC: 2

7 Nov 1994

5340-12-381-5756
Webbing Strap

123815756
7083986: RNCC: 3 | RNVC: 2

5 Mar 2010

5340-12-191-3482
Angle Bracket

121913482
4064264640: RNCC: 3 | RNVC: 2

26 Jan 1982

5340-12-702-6038
Loop Clamp

127026038
VG95211-ML-127026038: RNCC: 2 | RNVC: 2
5192A-45KD: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-196-9996
Webbing Strap

121969996
4900059-342020.000.0: RNCC: 2 | RNVC: 2
01151-2-SCHLAUFE-FE400MM-LE600MM: RNCC: 3 | RNVC: 2
4900059-342020.000.0: RNCC: 3 | RNVC: 2
221-00-360-3: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-920-400: RNCC: 3 | RNVC: 2
4900059-342020.000.0: RNCC: 3 | RNVC: 2
4900059-342020.000.0: RNCC: 3 | RNVC: 2
4900059-342020-000-0: RNCC: 5 | RNVC: 2
221-00-360-3: RNCC: 5 | RNVC: 9
DIN60060-2-25X400X600-C3/SCHLAUF: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-350-5692
Rod End Clevis

123505692
2125-111630.02B: RNCC: 2 | RNVC: 2
2125-111630.02B: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-12-381-2953
Mounting Plate

123812953
424-04-IB4: RNCC: 3 | RNVC: 2
4250473100479: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-161-2436
Rod End Connector

121612436
160-73617-09: RNCC: 3 | RNVC: 2
160-73617-09: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-314-9164
Electrical-Mechanical Equipment Post

123149164
VG95148B8XM4X23-AL: RNCC: 2 | RNVC: 2
VG95148B8XM4X23-AL: RNCC: 3 | RNVC: 2
C249-A15-C43: RNCC: 5 | RNVC: 2

26 Aug 1988

5340-12-377-3562
Bow Handle

123773562
GN 623-37-B8-DSG: RNCC: 3 | RNVC: 2
GN623-37-B8-DSG: RNCC: 5 | RNVC: 2

12 Jan 2009

5340-12-350-4468
Webbing Strap

123504468
79014/026-1000-0400: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-305-2132
Mending Plate

123052132
2500121-610000.07: RNCC: 2 | RNVC: 2
65.7105.387.04-A001: RNCC: 3 | RNVC: 2
302176: RNCC: 5 | RNVC: 2
15.7105.387.04-A001: RNCC: 5 | RNVC: 9
15.7105.387.04: RNCC: 5 | RNVC: 9

8 Oct 1985

5340-12-302-6748
Dust And Moisture Seal Protective Plug

123026748
5800583-093901.001: RNCC: 3 | RNVC: 2
5800583-093901.001: RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-370-7013
Mounting Plate

123707013
492-188162.010: RNCC: 3 | RNVC: 2

12 Dec 2006

5340-12-364-8668
Block Clamp

123648668
SM218/10PA-GD-AS: RNCC: 3 | RNVC: 2
1110004188: RNCC: 5 | RNVC: 2

10 Nov 2004

5340-12-185-0917
Lock-Release Lever

121850917
0220800003: RNCC: 3 | RNVC: 2
02208-00: RNCC: 5 | RNVC: 2
02208.00-GRAU: RNCC: 5 | RNVC: 2
144L03500: RNCC: 5 | RNVC: 2

9 Sep 1980

5340-12-314-6717
Angle Bracket

123146717
512214-3406.000: RNCC: 3 | RNVC: 2
512214-3406: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-315-6650
Mending Plate

123156650
510252-3324.000: RNCC: 3 | RNVC: 2
510252-3324: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-381-0672
Webbing Strap

123810672
79036/137-3000-0500: RNCC: 3 | RNVC: 2

7 Jan 2010

5340-12-702-9207
Angle Bracket

127029207
VG95211-ML-127029207: RNCC: 2 | RNVC: 2
5.12.6601.8250.00: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-332-4370
Mounting Bracket

123324370
5-440-560: RNCC: 3 | RNVC: 2
440 560: RNCC: 5 | RNVC: 9
5-440 560: RNCC: 5 | RNVC: 9
5-440560: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-12-184-7215
Detent Plunger

121847215
9043 2 084-00: RNCC: 3 | RNVC: 2
90432084-00: RNCC: 5 | RNVC: 2
9043 2 084-00: RNCC: 5 | RNVC: 9
90432084-00: RNCC: 5 | RNVC: 9

14 Aug 1980

5340-12-702-4769
Mounting Bracket

127024769
VG95211-ML-127024769: RNCC: 2 | RNVC: 2
5.51.0605.0301.92: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-191-7851
Compression Cup

121917851
33.0002.362.4001: RNCC: 3 | RNVC: 2
164.3361-3: RNCC: 3 | RNVC: 9
164.3361-3: RNCC: 5 | RNVC: 9
33.0002.362.4001: RNCC: 5 | RNVC: 9
164.3361-3: RNCC: 5 | RNVC: 9
164-3361-3: RNCC: 5 | RNVC: 9

5 Mar 1982

5340-12-191-2426
Metal Runner

121912426
5012RN: RNCC: 3 | RNVC: 2
5012RN17-3-4: RNCC: 5 | RNVC: 2
0937894: RNCC: 5 | RNVC: 2
0937-894: RNCC: 5 | RNVC: 9

19 Jan 1982

5340-12-702-5802
Mounting Bracket

127025802
VG95211-ML-127025802: RNCC: 2 | RNVC: 2
5.51.7805.0001.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-300-2960
Dust And Moisture Seal Protective Cap

123002960
M8NR.608SCHWARZ: RNCC: 3 | RNVC: 2
1000/1071: RNCC: 3 | RNVC: 2
100107100: RNCC: 5 | RNVC: 2
GPN1000-1071: RNCC: 5 | RNVC: 2
GPN1000/1071: RNCC: 5 | RNVC: 2

21 Jul 1984

5340-12-361-4396
Mounting Bracket

123614396
5981-182810.003.0: RNCC: 3 | RNVC: 2

30 Sep 2003

5340-12-702-4935
Mounting Bracket

127024935
VG95211-ML-127024935: RNCC: 2 | RNVC: 2
5.51.5101.1080.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-322-4995
Double Angle Bracket

123224995
1.077.100-18: RNCC: 3 | RNVC: 2
1-077-100-18: RNCC: 5 | RNVC: 2
1.077.100-18: RNCC: 5 | RNVC: 2

27 Aug 1990

5340-12-333-5198
Lock-Release Lever

123335198
2300232-188100.003.0: RNCC: 2 | RNVC: 2
2300232-188100.003.0: RNCC: 3 | RNVC: 2

29 Dec 1993

5340-12-379-2373
Spring Loaded Cylinder Fastener

123792373
6.375-308.0: RNCC: 3 | RNVC: 2

7 Jul 2009

5340-12-187-3269
Retaining Strap

121873269
2300109-140200.015.0: RNCC: 3 | RNVC: 2
2300109-140200.015.0: RNCC: 3 | RNVC: 2
2300109-140200-015-0: RNCC: 5 | RNVC: 9

30 Mar 1981

5340-12-308-9383
Case Corner

123089383
P-244712-754: RNCC: 3 | RNVC: 2
P244712-754: RNCC: 5 | RNVC: 2

28 Nov 1986

5340-12-393-3312
Permanent Magnet

123933312
152036460: RNCC: 3 | RNVC: 2
152036460: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-12-191-0902
Leather Strap

121910902
CF 478 174 AU: RNCC: 3 | RNVC: 2
CF 478 174 AU: RNCC: 5 | RNVC: 2

11 Jan 1982

5340-12-314-8003
Dust And Moisture Seal Protective Cap

123148003
8977535104: RNCC: 3 | RNVC: 2
000 423 39 87: RNCC: 5 | RNVC: 2
0004233987: RNCC: 5 | RNVC: 2

11 Aug 1988

5340-12-378-2179
Mounting Bracket

123782179
41023491: RNCC: 3 | RNVC: 2

19 Mar 2009

5340-12-315-2695
Mounting Bracket

123152695
54.0026.046.00: RNCC: 3 | RNVC: 2

7 Oct 1988

5340-12-348-6697
Mechanical Stop

123486697
4019501: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-332-6762
Angle Bracket

123326762
81254410380: RNCC: 2 | RNVC: 2
81254410380: RNCC: 3 | RNVC: 2
81.25441.0380: RNCC: 5 | RNVC: 2

3 Sep 1993

5340-12-332-6976
Loop Clamp

123326976
9108510290: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-12-311-1730
Access Cover

123111730
00947501: RNCC: 3 | RNVC: 2

4 Aug 1987

5340-12-197-7469
Rod End Clevis

121977469
3748801: RNCC: 3 | RNVC: 2

21 Nov 1983

5340-12-330-1394
Cane Bolt

123301394
10 0013 234: RNCC: 3 | RNVC: 2
100013234: RNCC: 5 | RNVC: 2

7 Nov 1992

5340-12-329-3690
Clamping Catch

123293690
7361101: RNCC: 3 | RNVC: 2

13 Aug 1992

5340-12-384-6561
Roller Holder

123846561
F1.1189-30-10-10.45-00: RNCC: 3 | RNVC: 2

16 Mar 2011

5340-12-318-0982
Access Cover

123180982
140-132400-001-0: RNCC: 3 | RNVC: 2
066732-625: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-327-1532
Access Cover

123271532
SK350-060073.000.0: RNCC: 3 | RNVC: 2

6 Dec 1991

5340-12-701-6569
Mounting Bracket

127016569
VG95211-ML-127016569: RNCC: 2 | RNVC: 2
5.12.7208.8011.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-162-0025
Resilient Mount

121620025
2300007-010000.008.0: RNCC: 2 | RNVC: 2
0064105009: RNCC: 3 | RNVC: 2
786025S4MITTEL: RNCC: 3 | RNVC: 2
57860250422: RNCC: 5 | RNVC: 2
786025S4BL.2: RNCC: 5 | RNVC: 2
2300007-010000.008.0: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-9897
Angle Bracket

127019897
VG95211-ML-127019897: RNCC: 2 | RNVC: 2
155N1377-6: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-195-9808
Swivel Caster

121959808
6.435-041.0: RNCC: 3 | RNVC: 2
HG416: RNCC: 5 | RNVC: 9
6.435-041: RNCC: 5 | RNVC: 9
6-435-041: RNCC: 5 | RNVC: 9
LPV140KMEGTOTAL-STOPALTE PLATTE: RNCC: 5 | RNVC: 9

10 May 1983

5340-12-182-6310
Retaining Strap

121826310
0287 6421: RNCC: 3 | RNVC: 2
2876421: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-12-004-3384

5340-12-004-3794

5340-12-004-2105

5340-12-349-2553
Angle Bracket

123492553
A1Z10275574: RNCC: 2 | RNVC: 2
A1Z10275574: RNCC: 3 | RNVC: 2
20352490: RNCC: 5 | RNVC: 2

18 Oct 1999

5340-12-388-8409
Bow Handle

123888409
RP3636.010: RNCC: 3 | RNVC: 2
4028177048256: RNCC: 5 | RNVC: 2
76169990: RNCC: 5 | RNVC: 2

27 Apr 2012

5340-12-369-8743
Manual Control Lever

123698743
61058: RNCC: 3 | RNVC: 2

23 Aug 2006

5340-12-381-9483
Mounting Bracket

123819483
09379582: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-12-383-0481
Helical Compression Spring Seat

123830481
2222370: RNCC: 3 | RNVC: 2

8 Sep 2010

5340-12-377-0191
Loop Clamp

123770191
DIN3016-1-D1-35X20-W3-EPDM: RNCC: 2 | RNVC: 2
41231094: RNCC: 5 | RNVC: 2

3 Dec 2008

5340-12-197-7380
Butt Hinge Leaf

121977380
P-296877-408: RNCC: 3 | RNVC: 2
P296877-408: RNCC: 5 | RNVC: 2

18 Nov 1983

5340-12-152-3039
Loop Clamp

121523039
5800400-0124-010: RNCC: 3 | RNVC: 2
6P358-124-10: RNCC: 5 | RNVC: 2
5800400-0124-010: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-370-3645
Rigid Caster

123703645
V6520-03012-104: RNCC: 2 | RNVC: 2
V6520-03012-104: RNCC: 3 | RNVC: 2

30 Oct 2006

5340-12-196-9702
Clip Retainer Plate

121969702
A-145324-015: RNCC: 3 | RNVC: 2
A145324-015: RNCC: 5 | RNVC: 2

6 Sep 1983

5340-12-301-2060
Double Angle Bracket

123012060
A-295042-403: RNCC: 3 | RNVC: 2
A295042-403: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-316-6401
Mounting Bracket

123166401
1000192-01 4 10000.04: RNCC: 2 | RNVC: 2
1000192-01 4 10000.04: RNCC: 3 | RNVC: 2
1000192-01 4 10000.04: RNCC: 5 | RNVC: 9

30 Jan 1989

5340-12-197-5365
Strap Bolt

121975365
3361A-60MM-MMCH-MIT 3461: RNCC: 3 | RNVC: 2

28 Oct 1983

5340-12-381-5002
Mounting Bracket

123815002
WEW-5838-04: RNCC: 3 | RNVC: 2

24 Feb 2010

5340-12-365-5876
Double Angle Bracket

123655876
J32320044-001: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-328-9522
Webbing Strap

123289522
2653-971051.00: RNCC: 2 | RNVC: 2
2653-971051.00: RNCC: 3 | RNVC: 2
2653-971051.00: RNCC: 3 | RNVC: 2
82300-C150X20-NBR-ST-OG: RNCC: 6 | RNVC: 9

3 Jul 1992

5340-12-341-9812
Butt Hinge Leaf

123419812
DIN31212-A5X6X30: RNCC: 2 | RNVC: 2

23 Nov 1996

5340-12-322-8964
Electrical-Mechanical Equipment Post

123228964
C40165-A321-C11: RNCC: 3 | RNVC: 2

5 Oct 1990

5340-12-310-0893
Access Cover

123100893
1361013-32003-02: RNCC: 3 | RNVC: 2

6 Apr 1987

5340-12-702-0232
Loop Clamp

127020232
VG95211-ML-127020232: RNCC: 2 | RNVC: 2
200N7-210: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-305-4438
Recess Handle

123054438
60817-050: RNCC: 3 | RNVC: 2

7 Nov 1985

5340-12-700-1961
Protection Bellows

127001961
765-17-186: RNCC: 2 | RNVC: 2

4 Nov 1991

5340-12-337-6993
Spring Loaded Cylinder Fastener

123376993
47249: RNCC: 3 | RNVC: 9
C22334-Z2-C375: RNCC: 5 | RNVC: 2

29 Mar 1995

5340-12-374-6451
Mending Plate

123746451
353 9520-001: RNCC: 3 | RNVC: 2
353 9520-001: RNCC: 5 | RNVC: 2

4 Mar 2008

5340-12-164-1031
Loop Clamp

121641031
DIN3016-1-D1-28X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-28X12-W1-2: RNCC: 3 | RNVC: 2
RSGU1.28/12: RNCC: 3 | RNVC: 2
9410012028: RNCC: 5 | RNVC: 2
RSGU1100-28-12: RNCC: 5 | RNVC: 2
RSGU1100.28/12: RNCC: 5 | RNVC: 2
DIN3016-D1-28X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-D28X12-W1: RNCC: 5 | RNVC: 9
VG95931D28X12W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-6330
Mounting Plate

127016330
VG95211-ML-127016330: RNCC: 2 | RNVC: 2
5.12.7060.1160.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-341-1504
Mending Plate

123411504
P-297201-069: RNCC: 3 | RNVC: 2
P297201-069: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-12-303-6318
Bow Handle

123036318
2360-263010.02.0: RNCC: 2 | RNVC: 2
2360-263010.02.0: RNCC: 3 | RNVC: 2
35E2630-02.100: RNCC: 5 | RNVC: 2
2360-263010.02.0: RNCC: 5 | RNVC: 2
2360-263010-02-0: RNCC: 5 | RNVC: 9

16 Apr 1985

5340-12-700-8980
Rod End Connector

127008980
VG95211-ML-127008980: RNCC: 2 | RNVC: 2
2.11.5101.8860.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-0504
Angle Bracket

127020504
VG95211-ML-127020504: RNCC: 2 | RNVC: 2
2742A-8-M: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-340-0175
Mounting Bracket

123400175
PLASTIC-HALTER F. TROMMEL: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-12-197-7115
Electrical-Mechanical Equipment Post

121977115
23302-062400.01: RNCC: 2 | RNVC: 2
8402148: RNCC: 3 | RNVC: 2
0028218: RNCC: 5 | RNVC: 2
4-0028-218: RNCC: 5 | RNVC: 2
23302-062400.01: RNCC: 5 | RNVC: 9

17 Nov 1983

5340-12-327-6612
Filler Opening Cap

123276612
00003500530: RNCC: 3 | RNVC: 2

14 Feb 1992

5340-12-162-1310
Dust And Moisture Seal Protective Cap

121621310
2367: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-174-4073
Helical Compression Spring Seat

121744073
8953609104: RNCC: 3 | RNVC: 2
1692-287: RNCC: 5 | RNVC: 2
8461102: RNCC: 5 | RNVC: 2

29 Jun 1978

5340-12-188-9953
Mending Plate

121889953
9112139: RNCC: 3 | RNVC: 2
23615100002000: RNCC: 5 | RNVC: 2
F300 0T 001 2800: RNCC: 6 | RNVC: 9

17 Aug 1981

5340-12-320-9943
Angle Bracket

123209943
0415 2427: RNCC: 3 | RNVC: 2
04152427ED0150-39: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-12-317-3439
Mending Plate

123173439
2300279-4002.03: RNCC: 2 | RNVC: 2
2300279-4002.03: RNCC: 3 | RNVC: 2
9873028: RNCC: 5 | RNVC: 2
2300279-4002.03: RNCC: 5 | RNVC: 9
9873028: RNCC: 5 | RNVC: 9

30 Mar 1989

5340-12-374-4826
Rod End Clevis

123744826
L521M1817206: RNCC: 3 | RNVC: 2

21 Feb 2008

5340-12-383-5714
Hand Crank

123835714
260G7200MG: RNCC: 3 | RNVC: 2

9 Nov 2010

5340-12-304-5154
Line Supporting Strap

123045154
1901024006: RNCC: 3 | RNVC: 2
1901024006: RNCC: 5 | RNVC: 2

26 Jul 1985

5340-12-193-3307
Pipe Bracket

121933307
WG300564BR: RNCC: 3 | RNVC: 9
WG 300 564 BR: RNCC: 5 | RNVC: 2
WG300564BR: RNCC: 5 | RNVC: 2
WG 300 564 BR: RNCC: 5 | RNVC: 9

12 Jul 1982

5340-12-173-8535
Loop Clamp

121738535
PAN4231BBE4422: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-041-0181

5340-12-011-5003

5340-12-314-7691
Nonmetallic Bumper

123147691
NO PRIMARY REF 12-314-7691: RNCC: 3 | RNVC: 2
2600055: RNCC: 5 | RNVC: 9

9 Aug 1988

5340-12-352-6309
Flush Bolt

123526309
3101-0003: RNCC: 2 | RNVC: 2
3101-0003: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-327-0641
Mounting Bracket

123270641
5803702-100000.02: RNCC: 2 | RNVC: 2
7802180102: RNCC: 3 | RNVC: 2
78021 80102: RNCC: 5 | RNVC: 9

27 Nov 1991

5340-12-310-3335
Access Cover

123103335
0651501: RNCC: 3 | RNVC: 2
5340-12-178-1532: RNCC: 6 | RNVC: 9

11 May 1987

5340-12-161-9191
Double Angle Bracket

121619191
4401 301 050: RNCC: 3 | RNVC: 2
4167604: RNCC: 5 | RNVC: 2
1220-045: RNCC: 5 | RNVC: 2
1220045: RNCC: 5 | RNVC: 2
1070321: RNCC: 5 | RNVC: 2
4401301050: RNCC: 5 | RNVC: 2
4401301050: RNCC: 5 | RNVC: 9
4401 301 050: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-8456
Mounting Bracket

123168456
E3-09.01.04-003: RNCC: 3 | RNVC: 2

16 Feb 1989

5340-12-393-6847
Mounting Bracket

123936847
11.29251-0020: RNCC: 3 | RNVC: 2
11.29251-0020: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-12-318-5694
Nonmetallic Bumper

123185694
6100126-9000.01: RNCC: 2 | RNVC: 2
6100126-9000.01: RNCC: 3 | RNVC: 2

28 Jul 1989

5340-12-376-9948
Threaded Rod End

123769948
PAN4551A2: RNCC: 3 | RNVC: 2

1 Dec 2008

5340-12-172-1703
Friction Catch

121721703
4090: RNCC: 3 | RNVC: 2
4000 5881: RNCC: 5 | RNVC: 2

27 Dec 1977

5340-12-318-5832
Nonmetallic Bumper

123185832
SJ5017WEISS: RNCC: 3 | RNVC: 2
86261: RNCC: 5 | RNVC: 2
SJ5017,WEISS: RNCC: 5 | RNVC: 2
SJ5017: RNCC: 5 | RNVC: 9

31 Jul 1989

5340-12-183-6733

5340-12-388-5127
Access Cover

123885127
2000002-991050.000.0: RNCC: 3 | RNVC: 2

28 Mar 2012

5340-12-197-5313
Nonmetallic Bumper

121975313
4049870237: RNCC: 3 | RNVC: 2

28 Oct 1983

5340-12-358-0570
Retaining Strap

123580570
2143259: RNCC: 3 | RNVC: 2
2955GL-M20: RNCC: 5 | RNVC: 2

6 Sep 2002

5340-12-198-2565
Rod End Connector

121982565
1423524050: RNCC: 3 | RNVC: 2
1423524050: RNCC: 5 | RNVC: 2
0130 1822: RNCC: 5 | RNVC: 2
VDPM00747: RNCC: 5 | RNVC: 2

5 Jan 1984

5340-12-330-2518
Access Cover

123302518
CH18424: RNCC: 3 | RNVC: 2
CH18424: RNCC: 5 | RNVC: 9

21 Nov 1992

5340-12-387-8654
Dust And Moisture Seal Protective Plug

123878654
7093876: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-366-9743
Mounting Bracket

123669743
2300421-204833.000: RNCC: 2 | RNVC: 2
2300421-204833.000: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-027-0760

5340-12-367-8461
Mounting Bracket

123678461
2300447-251550.000: RNCC: 2 | RNVC: 2
2300447-251550.000: RNCC: 3 | RNVC: 2

24 Oct 2005

5340-12-350-0072
Escutcheon Plate

123500072
81626420031: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-701-4091
Loop Clamp

127014091
VG95211-ML-127014091: RNCC: 2 | RNVC: 2
5.12.5311.8330.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-381-0681
Webbing Strap

123810681
01803/P-2-01244/FE1350-LE550: RNCC: 3 | RNVC: 2

7 Jan 2010

5340-12-701-6497
Angle Bracket

127016497
VG95211-ML-127016497: RNCC: 2 | RNVC: 2
5.12.7205.1070.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-303-5581
Mending Plate

123035581
3-150VG85027: RNCC: 2 | RNVC: 2
HALTERING 3-150VG85027: RNCC: 5 | RNVC: 2

4 Apr 1985

5340-12-301-6857
Manual Control Handle

123016857
116 006: RNCC: 3 | RNVC: 2
106402/D: RNCC: 5 | RNVC: 2
106402/A: RNCC: 5 | RNVC: 2
116006: RNCC: 5 | RNVC: 2
4271: RNCC: 5 | RNVC: 2
4271: RNCC: 5 | RNVC: 9
106402/A: RNCC: 5 | RNVC: 9
106402/D: RNCC: 5 | RNVC: 9
116 006: RNCC: 5 | RNVC: 9
116006: RNCC: 5 | RNVC: 9

1 Nov 1984

5340-12-360-6140
Loop Clamp

123606140
DIN3016-1-D1-50X25-W1-2-CR: RNCC: 2 | RNVC: 2
BRSGU50/25N16016: RNCC: 3 | RNVC: 2
916016050204: RNCC: 5 | RNVC: 2

17 Jun 2003

5340-12-363-1149
Runner

123631149
2125-122400B01B: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-194-3925
Spacing Threaded Standoff

121943925
PAN5170-10-060: RNCC: 3 | RNVC: 2

28 Oct 1982

5340-12-305-0557
Angle Bracket

123050557
P-296883-109: RNCC: 3 | RNVC: 2
P296883-109: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-175-1429
Butt Hinge

121751429
81972012156: RNCC: 3 | RNVC: 2
23230-184803-008-0: RNCC: 5 | RNVC: 9
23230-184803.008.0: RNCC: 5 | RNVC: 9

28 Aug 1978

5340-12-166-6210
Helical Compression Spring Retainer

121666210
02483262: RNCC: 3 | RNVC: 2
2483262ED5046-04: RNCC: 5 | RNVC: 2

28 Sep 1976

5340-12-196-5740
Bridge Clamp

121965740
KB-60738-500: RNCC: 3 | RNVC: 2

19 Jul 1983

5340-12-341-2108
Runner

123412108
2500262-194200.000.0: RNCC: 2 | RNVC: 2
2500262-194200.000.0: RNCC: 3 | RNVC: 2

9 Aug 1996

5340-12-341-0950
Handwheel

123410950
DIN3319-250X17 SCHWARZ LACKIERT: RNCC: 2 | RNVC: 2
81051701: RNCC: 3 | RNVC: 2
20.01.01-100MM PN7: RNCC: 5 | RNVC: 2
20.01.01-DN100-TEIL7: RNCC: 5 | RNVC: 2

26 Jul 1996

5340-12-702-9380
Dust And Moisture Seal Protective Cap

127029380
VG95211-ML-127029380: RNCC: 2 | RNVC: 2
5660A-M48-1-1: RNCC: 3 | RNVC: 2
0500840350390: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-197-7006
Double Angle Bracket

121977006
A-921226-001: RNCC: 3 | RNVC: 2
A921226-001: RNCC: 5 | RNVC: 2

15 Nov 1983

5340-12-701-4963
Retaining Strap

127014963
VG95211-ML-127014963: RNCC: 2 | RNVC: 2
5.12.5850.1800.04: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-313-1680
Double Angle Bracket

123131680
P-086148-013: RNCC: 3 | RNVC: 2
P086148-013: RNCC: 5 | RNVC: 2

9 Mar 1988

5340-12-193-8266
Pipe Bracket

121938266
02-0899-180370.00.0: RNCC: 3 | RNVC: 2
02-0899-180370-00-0: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-12-300-1585
Angle Bracket

123001585
P-296829-003: RNCC: 3 | RNVC: 2
P296829-003: RNCC: 5 | RNVC: 2

7 Jul 1984

5340-12-155-7457
Resilient Mount

121557457
80708101: RNCC: 3 | RNVC: 2
420-103-B-00.00: RNCC: 3 | RNVC: 2
420-103-B-00.00: RNCC: 5 | RNVC: 2
845.420-103B00-00: RNCC: 5 | RNVC: 2
420-103B00-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-043-4225

5340-12-369-6801
Swivel Caster

123696801
LH-POEV 200K: RNCC: 3 | RNVC: 2

8 Aug 2006

5340-12-369-6611
Dust And Moisture Seal Protective Cover

123696611
64054: RNCC: 3 | RNVC: 2

7 Aug 2006

5340-12-198-3522
Extension Drawer Slide

121983522
69000-744: RNCC: 3 | RNVC: 2

18 Jan 1984

5340-12-363-5127
Mechanical Stop

123635127
9421270200: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-171-5692
Mending Plate

121715692
JJ47203: RNCC: 3 | RNVC: 2

26 Oct 1977

5340-12-308-8189
Manual Control Handle

123088189
5800980426: RNCC: 3 | RNVC: 2
580 098 04 26: RNCC: 5 | RNVC: 2

18 Nov 1986

5340-12-191-7848
Dust And Moisture Seal Protective Plug

121917848
9N15042: RNCC: 3 | RNVC: 2
915042009000: RNCC: 5 | RNVC: 2

5 Mar 1982

5340-12-362-7656
Nonmetallic Bumper

123627656
S880M00X1006: RNCC: 3 | RNVC: 2

30 Mar 2004

5340-12-363-7177
Dust And Moisture Seal Protective Cap-Plug

123637177
N10034401: RNCC: 3 | RNVC: 2

16 Jul 2004

5340-12-372-5626
Webbing Strap

123725626
6417520083: RNCC: 3 | RNVC: 2

30 Jul 2007

5340-12-310-2650
Eye Hook

123102650
26978: RNCC: 3 | RNVC: 2

30 Apr 1987

5340-12-361-6297
Dust And Moisture Seal Protective Plug

123616297
209148: RNCC: 3 | RNVC: 2
RM2100G005: RNCC: 5 | RNVC: 2

27 Oct 2003

5340-12-352-5703
Nonmetallic Bumper

123525703
5400051-776211.06: RNCC: 2 | RNVC: 2
5400051-776211.06: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-382-5814
Cremone Bolt

123825814
6000039: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-12-375-2084
Swivel Caster

123752084
116022: RNCC: 3 | RNVC: 2

5 May 2008

5340-12-344-6423

5340-12-364-2053
Mounting Bracket

123642053
4374201686: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-352-6341
Mounting Bracket

123526341
1218 8637: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-363-5175
Turnbuckle Body

123635175
196733: RNCC: 3 | RNVC: 2
196.733: RNCC: 5 | RNVC: 2

24 Jun 2004

5340-12-367-9229
Loop Clamp

123679229
774215308: RNCC: 3 | RNVC: 2

4 Nov 2005

5340-12-335-9969
Metallic Solid Wheel

123359969
5838.04.063: RNCC: 3 | RNVC: 2
5838 04 063: RNCC: 5 | RNVC: 2

11 Oct 1994

5340-12-308-1528
Mending Plate

123081528
8732000740: RNCC: 2 | RNVC: 2
8732000740: RNCC: 3 | RNVC: 2

9 Sep 1986

5340-12-363-1917
Nonmetallic Bumper

123631917
J0413020H113-003A0-009: RNCC: 3 | RNVC: 2

12 May 2004

5340-12-190-9361
Resilient Mount

121909361
SP 404-254: RNCC: 3 | RNVC: 2
SP404-254: RNCC: 5 | RNVC: 2

23 Dec 1981

5340-12-356-4585
Mechanical Stop

123564585
2339-070030A07B: RNCC: 3 | RNVC: 2

1 Mar 2002

5340-12-382-4485
Buckle

123824485
TNR13843-02: RNCC: 3 | RNVC: 2
T17025-02: RNCC: 5 | RNVC: 2

23 Jun 2010

5340-12-199-6627
Mending Plate

121996627
238658-1104: RNCC: 3 | RNVC: 2
238658-1104: RNCC: 5 | RNVC: 9

19 May 1984

5340-12-335-2517
Butt Hinge

123352517
2300002-188320.007: RNCC: 2 | RNVC: 2
2300002-188320.007: RNCC: 3 | RNVC: 2
9868909: RNCC: 5 | RNVC: 2
9868909: RNCC: 5 | RNVC: 9

1 Aug 1994

5340-12-342-5029
Manual Control Lever

123425029
2300421-181240.000: RNCC: 2 | RNVC: 2
2300421-181240.000: RNCC: 3 | RNVC: 2
2300421-181240.000: RNCC: 5 | RNVC: 9
9917048: RNCC: 5 | RNVC: 9

20 Feb 1997

5340-12-305-1223
Mending Plate

123051223
5801759-121000.000: RNCC: 2 | RNVC: 2
5801759-121000.000: RNCC: 3 | RNVC: 2
5801759-121000.000: RNCC: 5 | RNVC: 9

27 Sep 1985

5340-12-366-7922
Access Cover

123667922
580-181000.101: RNCC: 2 | RNVC: 2
580-181000.101: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-12-322-8966
Sealing Plug Assembly

123228966
5835-1718: RNCC: 3 | RNVC: 2

5 Oct 1990

5340-12-338-3962
Handle Grip

123383962
0026-0012-030: RNCC: 3 | RNVC: 2
0026-0012-030: RNCC: 5 | RNVC: 9

3 Jul 1995

5340-12-321-8071
Helical Compression Spring Retainer

123218071
100418-0906.02: RNCC: 2 | RNVC: 2
100418-0906.02: RNCC: 3 | RNVC: 2
100418-0906.02: RNCC: 5 | RNVC: 9

28 Jun 1990

5340-12-188-9967
Angle Bracket

121889967
9458944: RNCC: 3 | RNVC: 2
095390026000: RNCC: 5 | RNVC: 2
F300 0T 001 2909: RNCC: 6 | RNVC: 9

17 Aug 1981

5340-12-181-0422
Electrical-Mechanical Equipment Post

121810422
MB0886797: RNCC: 3 | RNVC: 2
0886797: RNCC: 5 | RNVC: 2

19 Oct 1979

5340-12-347-7967
Access Cover

123477967
52 524 1095: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-12-345-2694
Runner

123452694
52.1850.600.01: RNCC: 3 | RNVC: 2

20 Feb 1998

5340-12-172-1695
Friction Catch

121721695
5078A: RNCC: 3 | RNVC: 2
620590: RNCC: 5 | RNVC: 2
63140060: RNCC: 5 | RNVC: 2

27 Dec 1977

5340-12-136-8619

5340-12-346-7532
Access Cover

123467532
8474.1010: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-194-5557
Resilient Mount

121945557
E24887: RNCC: 3 | RNVC: 2

15 Nov 1982

5340-12-318-4696
Support Hook

123184696
81424015122: RNCC: 3 | RNVC: 2
81.42401.5122: RNCC: 5 | RNVC: 2

18 Jul 1989

5340-12-375-9617
Expansion Shield

123759617
050359: RNCC: 3 | RNVC: 2
4006209503591: RNCC: 5 | RNVC: 2
N8X120Z: RNCC: 5 | RNVC: 2

24 Jul 2008

5340-12-194-1237
Catch Strike

121941237
A501059: RNCC: 3 | RNVC: 2

5 Oct 1982

5340-12-336-9861
Angle Bracket

123369861
81415010322: RNCC: 3 | RNVC: 2
81.41501.0322: RNCC: 5 | RNVC: 2

5 Jan 1995

5340-12-373-6340
Helical Compression Spring Seat

123736340
X00017893: RNCC: 3 | RNVC: 2
8800530325: RNCC: 5 | RNVC: 2

22 Nov 2007

5340-12-042-1056

5340-12-011-4726

5340-12-146-5335
Loop Clamp

121465335
211-15060: RNCC: 3 | RNVC: 2
6C: RNCC: 3 | RNVC: 2
6C: RNCC: 5 | RNVC: 2
5800583-096190-121: RNCC: 5 | RNVC: 2
5800583-096190.121: RNCC: 5 | RNVC: 2
6CFBN181-02N2501: RNCC: 5 | RNVC: 2
6C: RNCC: 5 | RNVC: 2
202003901: RNCC: 5 | RNVC: 9
6C: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-174-4870
Angle Bracket

121744870
7882751: RNCC: 3 | RNVC: 2
7882-751: RNCC: 5 | RNVC: 2
1000025-565510: RNCC: 5 | RNVC: 9

3 Jul 1978

5340-12-341-0800
Pad Eye

123410800
FCB-85376: RNCC: 3 | RNVC: 2
FCB85376: RNCC: 5 | RNVC: 2

25 Jul 1996

5340-12-142-7643
Compression Cup

121427643
SK590923: RNCC: 3 | RNVC: 2
0107 3511: RNCC: 5 | RNVC: 2
6100008-50-17: RNCC: 5 | RNVC: 2
6100008-50-17: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-304-4011
Retaining Strap

123044011
23114-1900.23: RNCC: 2 | RNVC: 2
23114-1900.23: RNCC: 5 | RNVC: 2
23114-1900-23: RNCC: 5 | RNVC: 9
23114-1900.23: RNCC: 5 | RNVC: 9
23114-1900-23: RNCC: 5 | RNVC: 9

12 Jul 1985

5340-12-391-6207
Bow Handle

123916207
R2-08.055.01: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-12-186-5079
Metal Runner

121865079
100L55-7121-011-00-07: RNCC: 2 | RNVC: 2
100L55-7121-011-00-07: RNCC: 5 | RNVC: 2

12 Jan 1981

5340-12-191-8751
Nonmetallic Bumper

121918751
14021-15008.01: RNCC: 3 | RNVC: 2
14021-15008-01: RNCC: 5 | RNVC: 2

15 Mar 1982

5340-12-375-4918
Spring Tension Clip

123754918
029-0262-00: RNCC: 3 | RNVC: 2
0005450173: RNCC: 5 | RNVC: 2

9 Jun 2008

5340-12-305-1124
Angle Bracket

123051124
4900059-211301.002.0: RNCC: 3 | RNVC: 2
1218850: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-300-9949
Resilient Mount

123009949
65D8-U16: RNCC: 3 | RNVC: 2
65D8U16: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-323-8152
Mounting Plate

123238152
100-00082-12.02: RNCC: 2 | RNVC: 2
100-00082-12.02: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-12-184-5556
Electrical-Mechanical Equipment Post

121845556
5801338-02122-005: RNCC: 3 | RNVC: 2
5801338-02122.005: RNCC: 5 | RNVC: 2

31 Jul 1980

5340-12-136-2337
Nonmetallic Bumper

121362337
VG95092B20X10X40PUR60: RNCC: 2 | RNVC: 2
82200-B20X10X40.PUR60: RNCC: 3 | RNVC: 2
B20X10X40.60PUR: RNCC: 5 | RNVC: 2
81960200028: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-0826
Angle Bracket

123050826
5801759-040000.002: RNCC: 2 | RNVC: 2
5801759-040000.002: RNCC: 3 | RNVC: 2
5801759-040000.002: RNCC: 5 | RNVC: 9

24 Sep 1985

5340-12-300-3640
Angle Bracket

123003640
6100128-12000.001: RNCC: 2 | RNVC: 2
4102612506: RNCC: 3 | RNVC: 2
6100128-12000.001: RNCC: 5 | RNVC: 2

27 Jul 1984

5340-12-356-7540
Lock-Release Lever

123567540
2125-126020.00C: RNCC: 2 | RNVC: 2
2125-126020.00C: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-370-9350
Mounting Plate

123709350
82152400078: RNCC: 3 | RNVC: 2
82.15240-0078: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-12-321-6156
Angle Bracket

123216156
702-161110-904-0: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-151-3238
Clamping Catch

121513238
E00055-153: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-322-5072
Mounting Bracket

123225072
076-365032-000-0: RNCC: 2 | RNVC: 2
076-365032-000-0: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-364-3911
Angle Bracket

123643911
5981-182200.011.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-306-9595
Resilient Mount

123069595
155015-6,6-HD.ST-60: RNCC: 3 | RNVC: 2
5215H-HDS: RNCC: 3 | RNVC: 2
60-52-15 HD-H: RNCC: 5 | RNVC: 2
VG95406-M4-7-Q-H-ST: RNCC: 5 | RNVC: 9
5215H-HDS: RNCC: 5 | RNVC: 9

21 Apr 1986

5340-12-333-5909
Mounting Bracket

123335909
P-875877-401: RNCC: 3 | RNVC: 2
P875877-401: RNCC: 5 | RNVC: 2

11 Jan 1994

5340-12-172-6620
Double Angle Bracket

121726620
117-100.0003: RNCC: 3 | RNVC: 2
117-100-0003: RNCC: 5 | RNVC: 2
124934: RNCC: 5 | RNVC: 2
124078: RNCC: 5 | RNVC: 9

8 Feb 1978

5340-12-702-2331
Mounting Bracket

127022331
VG95211-ML-127022331: RNCC: 2 | RNVC: 2
30.7701.320: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-337-6555
Angle Bracket

123376555
E5074-403-7: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-12-304-0891
Mending Plate

123040891
F01-240000A08.0: RNCC: 3 | RNVC: 2
F01-240000A08-0: RNCC: 5 | RNVC: 2

10 Jun 1985

5340-12-361-1517
Mounting Bracket

123611517
P-296819-067: RNCC: 3 | RNVC: 2
P-296819-067: RNCC: 5 | RNVC: 2
P296819-067: RNCC: 5 | RNVC: 9
P296819-067: RNCC: 5 | RNVC: 9

28 Aug 2003

5340-12-313-0142
Double Angle Bracket

123130142
P-086147-010: RNCC: 3 | RNVC: 2
P086147-010: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-307-7410
Rod End Connector

123077410
1215 9616: RNCC: 3 | RNVC: 2
6.226.0.473.004.4: RNCC: 5 | RNVC: 9
12159616: RNCC: 5 | RNVC: 9
6-226-0473-004-4: RNCC: 5 | RNVC: 9

22 Jul 1986

5340-12-156-1383
Webbing Strap

121561383
25704-360640.00.0: RNCC: 2 | RNVC: 2
82300-25704-360640.00.0: RNCC: 3 | RNVC: 2
25704-360640.00.0: RNCC: 3 | RNVC: 2
25704-360640.00.0: RNCC: 3 | RNVC: 2
25704-360640-00-0: RNCC: 5 | RNVC: 2
25704-360640-00-0: RNCC: 5 | RNVC: 9
25704-360640.00.0: RNCC: 5 | RNVC: 9
25704-360640.00.0: RNCC: 5 | RNVC: 9
82300-S230X20-NR-STZN-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-381-5605
Loop Clamp

123815605
DIN3016-1-D1-9X15-W5-CR: RNCC: 2 | RNVC: 2

4 Mar 2010

5340-12-345-8808
Webbing Strap

123458808
215363-2000: RNCC: 3 | RNVC: 2
(241)A39630-119507: RNCC: 5 | RNVC: 2
1PA39630-119507: RNCC: 5 | RNVC: 2
0-119507: RNCC: 8 | RNVC: 2

11 May 1998

5340-12-158-3802
Mending Plate

121583802
105-071-449-1: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-306-4027
Lock-Release Lever

123064027
84117/3-0001: RNCC: 3 | RNVC: 2
201510020: RNCC: 5 | RNVC: 2
84117/3-0001: RNCC: 5 | RNVC: 9

26 Feb 1986

5340-12-168-5056
Retaining Strap

121685056
23176-189320.03.0: RNCC: 2 | RNVC: 2
23176-189320.03.0: RNCC: 3 | RNVC: 2
23176-189320-03-0: RNCC: 5 | RNVC: 2
23176-189320-03-0: RNCC: 5 | RNVC: 9
23176-189320.03.0: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-384-9930
Rod End Clevis

123849930
F1.1289-37-10-00.00-13: RNCC: 3 | RNVC: 2

18 Apr 2011

5340-12-356-5973
Mounting Plate

123565973
6503.018.10.10/006: RNCC: 3 | RNVC: 2

14 Mar 2002

5340-12-150-7800
Resilient Mount

121507800
DIN95363-B70X45-NR65ST: RNCC: 2 | RNVC: 2
20290VSM650: RNCC: 5 | RNVC: 2
20290/V,NR65ST: RNCC: 5 | RNVC: 2
510046-M10X30.NR65.ST: RNCC: 5 | RNVC: 2
20290/B-BSTN6590: RNCC: 5 | RNVC: 2
20290/V-BSTN6590: RNCC: 5 | RNVC: 2
E1215-15-06: RNCC: 5 | RNVC: 9
VG95363-B70X45-NR65ST: RNCC: 5 | RNVC: 9
VG95363B70X45NR65ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-2314
Lock-Release Lever

121902314
02-0899-181730.00.0: RNCC: 3 | RNVC: 2
02-0899-181730-00-0: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-307-2357
Loop Clamp

123072357
266 026 UND 356 571: RNCC: 3 | RNVC: 2
266 026 AND 356 571: RNCC: 5 | RNVC: 2

23 May 1986

5340-12-316-1518
Metal Runner

123161518
3149190436: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-387-5254
Access Cover

123875254
3AK0021T01: RNCC: 3 | RNVC: 2

5 Jan 2012

5340-12-177-1654
Nonmetallic Bumper

121771654
1899870040: RNCC: 3 | RNVC: 2
1899870040: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-346-8237
Metallic Solid Wheel

123468237
2396-292000A14B: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-12-338-2416
Angle Bracket

123382416
0628101: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-12-310-6191
Helical Compression Spring Retainer

123106191
99014250122: RNCC: 3 | RNVC: 9
501703377: RNCC: 5 | RNVC: 2

10 Jun 1987

5340-12-310-8398
Access Cover

123108398
4493601: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-12-330-2526
Sealing Plug Assembly

123302526
8518013.020: RNCC: 3 | RNVC: 2
0851 8013.020: RNCC: 5 | RNVC: 2

21 Nov 1992

5340-12-190-8752
Helical Compression Spring Seat

121908752
2410320053: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-043-2654

5340-12-346-3641
Mounting Plate

123463641
88974800439: RNCC: 3 | RNVC: 2
88.97480.0439: RNCC: 5 | RNVC: 2

16 Jul 1998

5340-12-352-5856
Dust And Moisture Seal Protective Cap

123525856
SHG 160: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-12-392-2924
Cushioning Pad

123922924
7000115: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-387-8484
Permanent Magnet

123878484
7100541: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-190-9847
Expansion Shield

121909847
NA8X30: RNCC: 3 | RNVC: 2
50541: RNCC: 5 | RNVC: 2
2505411: RNCC: 5 | RNVC: 9

30 Dec 1981

5340-12-372-6776
Spring Loaded Cylinder Fastener

123726776
2205.410: RNCC: 3 | RNVC: 2
EH 2205.410: RNCC: 5 | RNVC: 2

10 Aug 2007

5340-12-303-9468
Butt Hinge Leaf

123039468
3226880151: RNCC: 3 | RNVC: 2

23 May 1985

5340-12-340-8443
Handle Grip

123408443
181036201: RNCC: 2 | RNVC: 2
181036201: RNCC: 3 | RNVC: 2
E181036201: RNCC: 5 | RNVC: 2

21 Jun 1996

5340-12-316-2942
Mending Plate

123162942
5183802: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-305-6273
Retaining Strap

123056273
136M19030: RNCC: 3 | RNVC: 2

28 Nov 1985

5340-12-393-1148
Angle Bracket

123931148
4000007384: RNCC: 3 | RNVC: 2

9 Aug 2013

5340-12-145-2814
Vorreibe Drehzapfen

121452814
2345-18100-08: RNCC: 3 | RNVC: 2
2345-18100-08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-3048
Mounting Plate

123653048
327305-02: RNCC: 3 | RNVC: 2

17 Dec 2004

5340-12-354-8123
Access Cover

123548123
8262-0011: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-361-7065
Butt Hinge

123617065
1056-U4: RNCC: 3 | RNVC: 2
704261108: RNCC: 5 | RNVC: 2

5 Nov 2003

5340-12-355-9547
Metal Grille

123559547
2500274-1000.03: RNCC: 2 | RNVC: 2
2500274-1000.03: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-356-1932
Access Cover

123561932
V6530-08005-102: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-12-315-0519
Mounting Bracket

123150519
9869308: RNCC: 3 | RNVC: 2
5801435-080130-00: RNCC: 5 | RNVC: 2
5801435-080130-00: RNCC: 5 | RNVC: 9
9869308: RNCC: 5 | RNVC: 9

9 Sep 1988

5340-12-327-8475
Angle Bracket

123278475
2653-186240.05: RNCC: 2 | RNVC: 2
2653-186240.05: RNCC: 3 | RNVC: 2

12 Mar 1992

5340-12-367-9234
Angle Bracket

123679234
J21520086-003: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-12-363-8462
Angle Bracket

123638462
J27620016-001: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-357-5030
Manual Control Lever

123575030
J94330215-001: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-12-178-2739
Threaded End Tensioning Tie Rod

121782739
1390-1000-35: RNCC: 3 | RNVC: 2

9 Apr 1979

5340-12-350-1244
Dust And Moisture Seal Protective Cap

123501244
64444181: RNCC: 3 | RNVC: 2
4444/181: RNCC: 5 | RNVC: 9

17 Feb 2000

5340-12-301-9256
Expansion Plug

123019256
0026-2130-030: RNCC: 3 | RNVC: 2
0026-2130-030: RNCC: 5 | RNVC: 2
0026-2130-030: RNCC: 5 | RNVC: 9

17 Nov 1984

5340-12-359-1507
Mounting Bracket

123591507
ZG5200G180: RNCC: 3 | RNVC: 2
ZG5200G180: RNCC: 5 | RNVC: 9
ZG5200G180ST: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-326-3413
Lock-Release Lever

123263413
1000025-265110.03: RNCC: 2 | RNVC: 2
1000025-265110.03: RNCC: 3 | RNVC: 2
1000025-265110.03: RNCC: 5 | RNVC: 9

3 Sep 1991

5340-12-326-4371
Loop Clamp

123264371
4212060034: RNCC: 3 | RNVC: 2

16 Sep 1991

5340-12-315-3533
Sealing Plug Assembly

123153533
1463203360: RNCC: 3 | RNVC: 2

14 Oct 1988

5340-12-369-6250
Spannversch Halter

123696250
5172300740: RNCC: 3 | RNVC: 2

2 Aug 2006

5340-12-181-3853
Retaining Strap

121813853
2300033-314230: RNCC: 2 | RNVC: 2
2300033-314230: RNCC: 5 | RNVC: 9
2300033-314230: RNCC: 5 | RNVC: 9

19 Nov 1979

5340-12-193-0306
Nonmetallic Bumper

121930306
5802300174: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-12-383-2604
Runner

123832604
310463: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-12-311-5110
Mounting Bracket

123115110
4584201: RNCC: 3 | RNVC: 2

11 Sep 1987

5340-12-135-9313

5340-12-135-7264

5340-12-322-0414
Metal Runner

123220414
702-241600-951-0: RNCC: 3 | RNVC: 2

19 Jul 1990

5340-12-373-6987
Angle Bracket

123736987
5.018-021.0: RNCC: 3 | RNVC: 2
5.018-021: RNCC: 5 | RNVC: 9

28 Nov 2007

5340-12-167-5481
Pipe Bracket

121675481
3553752: RNCC: 3 | RNVC: 2
3553752: RNCC: 5 | RNVC: 2
2848-2616-00: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-314-2208
Mending Plate

123142208
5801648-12900.01: RNCC: 2 | RNVC: 2
5801648-12900.01: RNCC: 3 | RNVC: 2

17 Jun 1988

5340-12-195-8814
Strap Hinge

121958814
VG95552-B80-ST: RNCC: 2 | RNVC: 2
5203: RNCC: 3 | RNVC: 2
VG95552-B80-ST: RNCC: 3 | RNVC: 2
B80VG95552-ST: RNCC: 5 | RNVC: 2
VG95552B80ST: RNCC: 5 | RNVC: 2

27 Apr 1983

5340-12-198-5027
Access Cover

121985027
160-744970-02: RNCC: 3 | RNVC: 2
160-744970-02: RNCC: 5 | RNVC: 9

2 Feb 1984

5340-12-193-0185
Plain Solid Disk

121930185
009-519.101-019: RNCC: 2 | RNVC: 2
5211-101.019: RNCC: 2 | RNVC: 2
009-519.101-019: RNCC: 3 | RNVC: 2
5211-101.019: RNCC: 5 | RNVC: 9

14 Jun 1982

5340-12-182-1830
Electrical-Mechanical Equipment Post

121821830
4769131: RNCC: 3 | RNVC: 2
5801505-205020-004: RNCC: 5 | RNVC: 2
5801505-205020.004: RNCC: 5 | RNVC: 9
5801505-205020-004: RNCC: 5 | RNVC: 9

18 Jan 1980

5340-12-190-7429
Webbing Strap

121907429
NO PRIMARY REF 12-190-7429: RNCC: 3 | RNVC: 2
5633125071: RNCC: 5 | RNVC: 9
5633 125071: RNCC: 5 | RNVC: 9
000-A2-25X2,0X620-BW-RAL6031: RNCC: 6 | RNVC: 9

10 Dec 1981

5340-12-385-2374
Mechanical Stop

123852374
F1.1189-40-40-10.00-12: RNCC: 3 | RNVC: 2

12 May 2011

5340-12-312-9969
Bridge Clamp

123129969
401840-00: RNCC: 3 | RNVC: 2
9XB401840-00: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-12-394-3279
Mounting Bracket

123943279
11.44043-0211: RNCC: 3 | RNVC: 2
11.44043-0211: RNCC: 5 | RNVC: 2

21 Nov 2013

5340-12-330-1631
Mending Plate

123301631
536077-0276.000: RNCC: 2 | RNVC: 2
536077-0276.000: RNCC: 3 | RNVC: 2
536077-0276.000: RNCC: 5 | RNVC: 9

10 Nov 1992

5340-12-334-8160
Mounting Bracket

123348160
6600185-203300.08: RNCC: 2 | RNVC: 2
6600185-203300.08: RNCC: 3 | RNVC: 2

23 Jun 1994

5340-12-171-7484
Retaining Strap

121717484
490127-36007-05: RNCC: 3 | RNVC: 2

10 Nov 1977

5340-12-317-5835
Mounting Bracket

123175835
00.8100-3.00-01: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-12-365-3508
Mounting Bracket

123653508
2500267-190049.001.0: RNCC: 2 | RNVC: 2
2500267-190049.001.0: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-12-379-5930
Dust And Moisture Seal Protective Cap

123795930
ED41-2688-00111-103: RNCC: 3 | RNVC: 2

12 Aug 2009

5340-12-331-9927
Mounting Bracket

123319927
702-132800-906-0: RNCC: 3 | RNVC: 2

15 Jul 1993

5340-12-178-6776
Loop Clamp

121786776
DIN3016-1-E1-30X25-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E1-30X25-W1-2: RNCC: 3 | RNVC: 2
RSGU0.30/25: RNCC: 3 | RNVC: 2
RSGU30-25: RNCC: 5 | RNVC: 2
RSGU30/25: RNCC: 5 | RNVC: 2
9400025030: RNCC: 5 | RNVC: 2
VG95931-E30X25-W1: RNCC: 5 | RNVC: 9
VG95931E30X25W1: RNCC: 5 | RNVC: 9
DIN3016-E1-30X25-W1-2: RNCC: 5 | RNVC: 9

9 May 1979

5340-12-344-9903
Casement Fastener

123449903
602E791: RNCC: 3 | RNVC: 2
602P0304-000-00.3: RNCC: 5 | RNVC: 2

20 Jan 1998

5340-12-189-2693
Expansion Plug

121892693
DIN443-A45-ST-A3P: RNCC: 2 | RNVC: 2
DIN443-A45-DBL8451.11: RNCC: 5 | RNVC: 2
A45DIN443A3B: RNCC: 5 | RNVC: 2
DIN443-A45-DBL8451.11: RNCC: 5 | RNVC: 2

16 Sep 1981

5340-12-172-6662
Electrical-Mechanical Equipment Post

121726662
1224-203.12: RNCC: 2 | RNVC: 2
532008-0303.000: RNCC: 3 | RNVC: 2
532008-303: RNCC: 3 | RNVC: 2
532008-0303.000: RNCC: 5 | RNVC: 2
532008-303: RNCC: 5 | RNVC: 2
1224-203-12: RNCC: 5 | RNVC: 9
1224-203.12: RNCC: 5 | RNVC: 9

8 Feb 1978

5340-12-328-5916
Angle Bracket

123285916
160-314038.107: RNCC: 3 | RNVC: 2
160-314038-107: RNCC: 5 | RNVC: 2
160-314038.107: RNCC: 5 | RNVC: 9

4 Jun 1992

5340-12-318-2756
Double Angle Bracket

123182756
6600015-203.002: RNCC: 3 | RNVC: 2
6600015-203.002: RNCC: 5 | RNVC: 9

26 Jun 1989

5340-12-390-0746
Access Door Hinge

123900746
2300559-188830.000.0: RNCC: 3 | RNVC: 2

1 Oct 2012

5340-12-161-3149
Swivel Caster

121613149
441A 17K160E ZPK: RNCC: 3 | RNVC: 2
441-15-K/160: RNCC: 5 | RNVC: 9
441-15K160: RNCC: 5 | RNVC: 9
441A15K160EZPK: RNCC: 5 | RNVC: 9
160X50X20DIN8458: RNCC: 5 | RNVC: 9
DIN8458B3-160X60B1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-6880
Mounting Bracket

127026880
VG95211-ML-127026880: RNCC: 2 | RNVC: 2
5.51.0605.0370.00: RNCC: 3 | RNVC: 2

25 Apr 1995

5340-12-312-5615
Loop Clamp

123125615
DIN3016-2-G1-24X15-W1-2: RNCC: 2 | RNVC: 2
SP24/15SKZ: RNCC: 3 | RNVC: 2
DIN3016-G1-24X15-W1-2: RNCC: 3 | RNVC: 2
1410000024: RNCC: 5 | RNVC: 2
DIN3016-G1-24X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-G24X15-W1: RNCC: 5 | RNVC: 9

18 Jan 1988

5340-12-303-8001
Retaining Strap

123038001
2360-264121.03.0: RNCC: 2 | RNVC: 2
2360-264121.03.0: RNCC: 3 | RNVC: 2
35E2641-03.210: RNCC: 5 | RNVC: 2
35E2641-03.210: RNCC: 5 | RNVC: 2
2360-264121.03.0: RNCC: 5 | RNVC: 2

6 May 1985

5340-12-197-1911
Butt Hinge Leaf

121971911
P-855941-005: RNCC: 3 | RNVC: 2
P855941-005: RNCC: 5 | RNVC: 2

28 Sep 1983

5340-12-322-9325
Mounting Bracket

123229325
704-163501-000-0: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-12-186-1463
Electrical-Mechanical Equipment Post

121861463
512206-4193.000: RNCC: 3 | RNVC: 2
512206-4193: RNCC: 5 | RNVC: 2
512206-4193-000: RNCC: 5 | RNVC: 2

2 Dec 1980

5340-12-177-8189
Spring Tension Clip

121778189
100600000-002: RNCC: 3 | RNVC: 2
100600000005/002: RNCC: 3 | RNVC: 2
1006000005: RNCC: 3 | RNVC: 2
5MBO06: RNCC: 5 | RNVC: 2
5MBO06 PHOSPH.: RNCC: 5 | RNVC: 2
5MBO06PHOSPHATIERT: RNCC: 5 | RNVC: 2
1006000005: RNCC: 5 | RNVC: 2
5ESN06: RNCC: 5 | RNVC: 2
5SXN06: RNCC: 5 | RNVC: 2
0637083: RNCC: 5 | RNVC: 2

28 Feb 1979

5340-12-323-4005
Helical Compression Spring Retainer

123234005
01TC35315-01: RNCC: 3 | RNVC: 2

22 Nov 1990

5340-12-195-6576
Loop Clamp

121956576
LN9491A20: RNCC: 2 | RNVC: 2

24 Mar 1983

5340-12-094-2014

5340-12-361-0851
Mounting Plate

123610851
64417306: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-375-5539
Angle Bracket

123755539
L258M2101101: RNCC: 3 | RNVC: 2

12 Jun 2008

5340-12-196-3038
Angle Bracket

121963038
03651700: RNCC: 3 | RNVC: 2

27 Jun 1983

5340-12-194-0218
Helical Compression Spring Seat

121940218
4163320162: RNCC: 3 | RNVC: 2

23 Sep 1982

5340-12-312-3791
Angle Bracket

123123791
100000543: RNCC: 2 | RNVC: 2
100000543: RNCC: 3 | RNVC: 2

22 Dec 1987

5340-12-164-5659

5340-12-385-7601
Mounting Plate

123857601
5561532441: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-12-343-8918
Mechanical Stop

123438918
1421034003: RNCC: 3 | RNVC: 2
0130 9260: RNCC: 5 | RNVC: 2

11 Aug 1997

5340-12-303-3139
Loop Clamp

123033139
0039975590: RNCC: 3 | RNVC: 2

13 Mar 1985

5340-12-360-1529
Loop Clamp

123601529
9424900041: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-343-0919
Dust And Moisture Seal Boot

123430919
4101 3913: RNCC: 3 | RNVC: 2
41013913: RNCC: 5 | RNVC: 2
41013913ED50-4253: RNCC: 5 | RNVC: 2

28 Apr 1997

5340-12-387-9781
Expansion Shield

123879781
024828: RNCC: 3 | RNVC: 2
SX8X65: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-12-026-9912

5340-12-321-3961
Lock-Release Lever

123213961
0000 1237 058: RNCC: 3 | RNVC: 2

15 May 1990

Load More Results