What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 39 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 39 of 178

5340-12-331-9745
Webbing Strap

123319745
01802-2-SCHLAUFE-FE1000-LE4000: RNCC: 3 | RNVC: 2
79036/SCHLAUFE-5000-1000: RNCC: 5 | RNVC: 2
01802-2-FE=1000-LE=4000: RNCC: 5 | RNVC: 2
01802-2-FE1000-LE4000: RNCC: 5 | RNVC: 2
01802-2-FE1000MM-LE4000MM: RNCC: 5 | RNVC: 2
01802-2-SCHLAUFE-FE1000-LE4000MM: RNCC: 5 | RNVC: 2
DIN60060-2-25X1000X4000-C1/SCHLA: RNCC: 5 | RNVC: 9

12 Jul 1993

5340-12-335-2371
Resilient Mount

123352371
NEW 2 C KLASSE 2-M16-G: RNCC: 3 | RNVC: 2
NEW 2 C KLASSE 2-G: RNCC: 5 | RNVC: 2
NEW 2 C KLASSE 2-M16-G: RNCC: 5 | RNVC: 2
NEW2CKL2M16: RNCC: 5 | RNVC: 2
TYPNEW2CKLASSE2: RNCC: 5 | RNVC: 2
331658936: RNCC: 5 | RNVC: 2
LL 173: RNCC: 5 | RNVC: 9

29 Jul 1994

5340-12-701-8026
Angle Bracket

127018026
VG95211-ML-127018026: RNCC: 2 | RNVC: 2
5.12.8102.8013.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-325-9919
Webbing Strap

123259919
5801984-984903.000.0: RNCC: 2 | RNVC: 2
5801984-984903.000.0: RNCC: 3 | RNVC: 2
5801984-984903.000.0: RNCC: 5 | RNVC: 2
5801984-984903.000.0: RNCC: 5 | RNVC: 2
000-B2-25X2,5X115-BW-RAL6031: RNCC: 6 | RNVC: 9

29 Jul 1991

5340-12-352-5865
Mounting Plate

123525865
2300388-161505.001: RNCC: 2 | RNVC: 2
9912561: RNCC: 3 | RNVC: 2
2300388-161505.001: RNCC: 5 | RNVC: 9
9912561: RNCC: 5 | RNVC: 9

29 Nov 2000

5340-12-316-3817
Mending Plate

123163817
39-2055-700000.00.0: RNCC: 2 | RNVC: 2
39-2055-700000.00.0: RNCC: 3 | RNVC: 2

13 Jan 1989

5340-12-156-6501
Resilient Mount

121566501
DIN95369-A4-4-CR-NMST: RNCC: 2 | RNVC: 2
60-201-070 A: RNCC: 5 | RNVC: 2
550-0437: RNCC: 5 | RNVC: 2
C2090AG: RNCC: 5 | RNVC: 2
550-0437: RNCC: 5 | RNVC: 2
151007-M12-CR.AM-70: RNCC: 5 | RNVC: 2
C2090PAG: RNCC: 5 | RNVC: 9
C2090PAG: RNCC: 5 | RNVC: 9
VG95369-A4-4-CR-NMST: RNCC: 5 | RNVC: 9
550-0437: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-8934
Catch Strike

121888934
5801433-020000.04.0: RNCC: 3 | RNVC: 2
5801433-020000-04-0: RNCC: 5 | RNVC: 2
5801433-020000-04-0: RNCC: 5 | RNVC: 9
5801433-020000.04.0: RNCC: 5 | RNVC: 9

6 Aug 1981

5340-12-192-6119
Angle Bracket

121926119
632-761151.31.3: RNCC: 3 | RNVC: 2
632-761151-31-3: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-165-8309
Mending Plate

121658309
25704-350000.20.0: RNCC: 2 | RNVC: 2
25704-350000.20.0: RNCC: 3 | RNVC: 2
25704-350000-20-0: RNCC: 5 | RNVC: 2
25704-350000.20.0: RNCC: 5 | RNVC: 9
25704-350000-20-0: RNCC: 5 | RNVC: 9

2 Jul 1976

5340-12-149-3950
Handwheel

121493950
25704-281120.06.0: RNCC: 2 | RNVC: 2
25704-281120.06.0: RNCC: 3 | RNVC: 2
25704-281120-06-0: RNCC: 5 | RNVC: 2
25704-281120-06-0: RNCC: 5 | RNVC: 9
25704-281120.06.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-323-8122
Mounting Bracket

123238122
42047569: RNCC: 3 | RNVC: 2
42047569KZ5052-81: RNCC: 5 | RNVC: 2

20 Dec 1990

5340-12-387-5357
Mounting Bracket

123875357
S345M7031101: RNCC: 3 | RNVC: 2

5 Jan 2012

5340-12-338-9158
Access Cover

123389158
357611349: RNCC: 3 | RNVC: 2

7 Sep 1995

5340-12-198-9567
Mending Plate

121989567
43711561-601: RNCC: 3 | RNVC: 2

15 Mar 1984

5340-12-318-1215
Strap Hinge

123181215
100332-014812: RNCC: 3 | RNVC: 2
100332-58111-00: RNCC: 5 | RNVC: 2
100332-014812: RNCC: 5 | RNVC: 9

13 Jun 1989

5340-12-361-0372
Multiple Angle Bracket

123610372
J92226496-405: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-169-7357
Nonmetallic Bumper

121697357
406-105-20-04: RNCC: 3 | RNVC: 2
4150-595: RNCC: 5 | RNVC: 2
4150595: RNCC: 5 | RNVC: 2
164-0521: RNCC: 5 | RNVC: 9
406-105-20-04: RNCC: 5 | RNVC: 9

3 Jun 1977

5340-12-312-7340
Mending Plate

123127340
6100108-1000.03: RNCC: 2 | RNVC: 2
6100108-1000.03: RNCC: 3 | RNVC: 2
6100108-1400: RNCC: 5 | RNVC: 9
6100108-1400: RNCC: 5 | RNVC: 9

1 Feb 1988

5340-12-359-9499
Dust And Moisture Seal Protective Cap

123599499
GPN1000-1075-SCHWARZ: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-12-333-2019
Friction Catch Stud

123332019
00098428970: RNCC: 3 | RNVC: 9
328-182400.016: RNCC: 5 | RNVC: 9
9842897: RNCC: 5 | RNVC: 9

9 Nov 1993

5340-12-318-9882
Loop Clamp

123189882
DIN3015-Z-KP-2-R-14-14-PP: RNCC: 2 | RNVC: 2
RBPR-214/14: RNCC: 3 | RNVC: 2
214/14PP: RNCC: 3 | RNVC: 2
HRZ2KP14-14PP: RNCC: 3 | RNVC: 2
520974: RNCC: 5 | RNVC: 2
RBPR-214/14: RNCC: 5 | RNVC: 2
DIN3015-ZKP2R-14-14PP: RNCC: 5 | RNVC: 2
214/14PP: RNCC: 5 | RNVC: 2
RBPR-214: RNCC: 5 | RNVC: 2
519843: RNCC: 5 | RNVC: 2

29 Aug 1989

5340-12-300-8427
Catch Strike

123008427
4355410225: RNCC: 3 | RNVC: 2
4355410225: RNCC: 5 | RNVC: 2
A4355410225: RNCC: 5 | RNVC: 2
4355410225: RNCC: 5 | RNVC: 2
A4355410225: RNCC: 5 | RNVC: 2

4 Sep 1984

5340-12-177-3714
Swivel Caster

121773714
K33-20RD-D19-W-E11-00: RNCC: 3 | RNVC: 2
SL0-HACOLON/200: RNCC: 5 | RNVC: 2
SL0HAC0L0N200: RNCC: 5 | RNVC: 2

29 Jan 1979

5340-12-191-3454
Retaining Strap

121913454
496.6015: RNCC: 3 | RNVC: 2
4966015: RNCC: 5 | RNVC: 2

26 Jan 1982

5340-12-354-5435
Bow Handle

123545435
3280.1301: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-12-384-2157
Dust And Moisture Seal Protective Cap-Plug

123842157
2301697: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-12-176-4922
Rod End Clevis

121764922
WW 419 204: RNCC: 2 | RNVC: 2
WW 419 204: RNCC: 3 | RNVC: 9
WW 419 204: RNCC: 5 | RNVC: 2
WW419204: RNCC: 5 | RNVC: 2
WW419204: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-307-7239
Turnbuckle Body

123077239
514 460 001 006: RNCC: 3 | RNVC: 2
514 001 006: RNCC: 5 | RNVC: 2
LMAG514 001 006: RNCC: 5 | RNVC: 2
0667659: RNCC: 5 | RNVC: 2

18 Jul 1986

5340-12-351-7494
Mounting Plate

123517494
1344.01.05.01.01: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-12-319-9674
Mounting Bracket

123199674
298.18.000: RNCC: 3 | RNVC: 9

23 Nov 1989

5340-12-338-8605
Nonmetallic Bumper

123388605
08 52 722: RNCC: 3 | RNVC: 2
852722: RNCC: 5 | RNVC: 2
90280491: RNCC: 5 | RNVC: 2

31 Aug 1995

5340-12-358-0256
Nonmetallic Bumper

123580256
701829499B: RNCC: 3 | RNVC: 2
701 829 499B: RNCC: 5 | RNVC: 9

3 Sep 2002

5340-12-367-2625
Headless Grooved Rod

123672625
0986611258: RNCC: 3 | RNVC: 2

26 Jul 2005

5340-12-163-5659
Loop Clamp

121635659
LN9490BM25: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-177-6142
Mounting Bracket

121776142
WW 410 914: RNCC: 3 | RNVC: 2
WW410914: RNCC: 3 | RNVC: 2
WW410914: RNCC: 5 | RNVC: 2
WW410914: RNCC: 5 | RNVC: 2
WW 410 914: RNCC: 5 | RNVC: 2

9 Feb 1979

5340-12-027-4448

5340-12-173-8548
Retaining Strap

121738548
P-296652-029: RNCC: 3 | RNVC: 2
P296652-029: RNCC: 5 | RNVC: 2

17 May 1978

5340-12-182-7848
Access Cover

121827848
8-7701.00: RNCC: 2 | RNVC: 2
8-7701.00: RNCC: 3 | RNVC: 2
8-7701-00: RNCC: 5 | RNVC: 9
8-7701-00: RNCC: 5 | RNVC: 9
8-7701-00: RNCC: 5 | RNVC: 9

27 Feb 1980

5340-12-304-7983
Support Hook

123047983
15150-08-74-276-00-1: RNCC: 3 | RNVC: 2
15150-08-74-276-00-1: RNCC: 5 | RNVC: 9
15150-08-74-276-00-1: RNCC: 5 | RNVC: 9

26 Aug 1985

5340-12-152-5475
Spring Tension Clip

121525475
03497330: RNCC: 3 | RNVC: 2
7101-11-101.05: RNCC: 5 | RNVC: 2
161435202: RNCC: 5 | RNVC: 2
3497330EE7101-11: RNCC: 5 | RNVC: 2
7101-11-101-05: RNCC: 5 | RNVC: 2
E7101-11-101-05: RNCC: 5 | RNVC: 2
7101-11-101-05: RNCC: 5 | RNVC: 9
E7101-11-101-05: RNCC: 5 | RNVC: 9
7101-11-101.05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-1311
Mounting Bracket

123651311
009-078.156-003: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-12-363-8493
Angle Bracket

123638493
J56120019-401: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-372-1954
Mounting Plate

123721954
453 8487-001: RNCC: 3 | RNVC: 2
453 8487-001: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-12-703-0569
Retaining Strap

127030569
VG95211-ML-127030569: RNCC: 2 | RNVC: 2
155N23-30: RNCC: 3 | RNVC: 2
0500802068079: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-324-9034
Mounting Bracket

123249034
5802031-3600: RNCC: 2 | RNVC: 2
7802071360: RNCC: 3 | RNVC: 2
5802031-3600: RNCC: 5 | RNVC: 2
78020 71360: RNCC: 5 | RNVC: 9

8 Apr 1991

5340-12-171-1606
Handle Grip

121711606
852-10-2KSZ: RNCC: 3 | RNVC: 2
81.97001-0222: RNCC: 5 | RNVC: 2
81970010222: RNCC: 5 | RNVC: 2
2608395: RNCC: 5 | RNVC: 9

12 Sep 1977

5340-12-124-1198
Rod End Clevis

121241198
DIN71752-G8X16-45S20K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G8X16-45S20K-A3P: RNCC: 3 | RNVC: 2
DIN71752-G8X16-45S20K-A3P: RNCC: 3 | RNVC: 2
100200080016/024-45S20K: RNCC: 5 | RNVC: 2
2060-004: RNCC: 5 | RNVC: 2
8414745: RNCC: 5 | RNVC: 2
G8X16DIN71752-45S20K: RNCC: 5 | RNVC: 2
131-0161: RNCC: 5 | RNVC: 9
DIN71752-G8X16-45S20K: RNCC: 5 | RNVC: 9
G8X16DIN71752-45S20K: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-332-0435
Access Cover

123320435
061 904 E: RNCC: 3 | RNVC: 2
0-1361: RNCC: 5 | RNVC: 2

19 Jul 1993

5340-12-196-4792
Escutcheon Plate

121964792
1246-12.6: RNCC: 2 | RNVC: 2
1246-12.6: RNCC: 3 | RNVC: 2
1246-12-6: RNCC: 5 | RNVC: 2

11 Jul 1983

5340-12-358-1075
Mounting Bracket

123581075
1651-120000.004.0: RNCC: 2 | RNVC: 2
1651-120000.004.0: RNCC: 3 | RNVC: 2

13 Sep 2002

5340-12-318-7093
Webbing Strap

123187093
704-122035-000-0: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-12-185-2030
Mending Plate

121852030
1000093-38220.04.0: RNCC: 2 | RNVC: 2
1000093-38220.04.0: RNCC: 3 | RNVC: 2
1000093-38220-04-0: RNCC: 5 | RNVC: 2
1000093-38220-04-0: RNCC: 5 | RNVC: 9
1000093-38220.04.0: RNCC: 5 | RNVC: 9

20 Sep 1980

5340-12-350-5699
Webbing Strap

123505699
A1Z10283989: RNCC: 2 | RNVC: 2
A1Z10283989: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-12-349-5017
Butt Hinge

123495017
T524M1521202: RNCC: 3 | RNVC: 2

23 Nov 1999

5340-12-183-0310
Access Cover

121830310
81669192008: RNCC: 3 | RNVC: 2

13 Mar 1980

5340-12-318-8123
Mending Plate

123188123
1700001-330.07: RNCC: 2 | RNVC: 2
500410: RNCC: 5 | RNVC: 2

18 Aug 1989

5340-12-351-2052
Rod End Clevis

123512052
3099-00-221000.02: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-12-165-5711
Nut And Bolt Locking Plate

121655711
PAN3408-03: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-12-319-8423
Elastic Strap

123198423
4900288-230100.00: RNCC: 2 | RNVC: 2
4312 711 28230: RNCC: 3 | RNVC: 2

9 Nov 1989

5340-12-364-4400
Dust And Moisture Seal Protective Plug

123644400
743408: RNCC: 3 | RNVC: 2

25 Sep 2004

5340-12-307-1575
Gummi- Riemen

123071575
4216700818: RNCC: 3 | RNVC: 2

15 May 1986

5340-12-307-2594
Dust And Moisture Seal Protective Cap

123072594
0009871245: RNCC: 3 | RNVC: 2

27 May 1986

5340-12-356-6205
Loop Clamp

123566205
112PP-DP: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-393-7726
Spring Tension Clip

123937726
9840125000: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-12-345-3753
Retaining Strap

123453753
81619410240: RNCC: 3 | RNVC: 2
38634: RNCC: 5 | RNVC: 2

10 Mar 1998

5340-12-359-0460
Support Hook

123590460
0008120326: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-169-3755

5340-12-321-9113
Nonmetallic Bumper

123219113
100.371: RNCC: 2 | RNVC: 2
100.371: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-12-325-0539
Mounting Plate

123250539
4139 310 213: RNCC: 3 | RNVC: 2
(241)A396300120509: RNCC: 5 | RNVC: 2
00120509: RNCC: 5 | RNVC: 2
4139310213: RNCC: 5 | RNVC: 2
4139 310 213: RNCC: 5 | RNVC: 2
0130327: RNCC: 5 | RNVC: 2

26 Apr 1991

5340-12-172-0638
Clamping Catch

121720638
1000078-700320: RNCC: 2 | RNVC: 2
1000078-700320: RNCC: 5 | RNVC: 2
1000078-700320: RNCC: 5 | RNVC: 9

19 Dec 1977

5340-12-318-9612
Nonmetallic Bumper

123189612
04632906: RNCC: 3 | RNVC: 2
04632906EE1208-53: RNCC: 5 | RNVC: 2

28 Aug 1989

5340-12-300-6892
Kunst Gleitschiene

123006892
4255400473: RNCC: 3 | RNVC: 2

23 Aug 1984

5340-12-349-3837
Mounting Plate

123493837
4653 314 023: RNCC: 3 | RNVC: 2

8 Nov 1999

5340-12-339-0510
Webbing Strap

123390510
4618900771: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-344-1318
Pad Eye

123441318
7741675: RNCC: 3 | RNVC: 2
99707741675: RNCC: 5 | RNVC: 2

17 Sep 1997

5340-12-351-5018
Double Angle Bracket

123515018
4615451840: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-356-1245
Retaining Strap

123561245
2143232: RNCC: 3 | RNVC: 2
2955GL-PG11: RNCC: 5 | RNVC: 2

24 Jan 2002

5340-12-041-9775

5340-12-027-9524

5340-12-346-9938
Spring Tension Clip

123469938
280855260-5F20-2061: RNCC: 3 | RNVC: 2

8 Oct 1998

5340-12-316-5821
Strap Fastener Loop

123165821
NO PRIMARY REF 12-316-5821: RNCC: 3 | RNVC: 2
40071 327 198: RNCC: 5 | RNVC: 2
40071327198: RNCC: 5 | RNVC: 2

26 Jan 1989

5340-12-300-8681
Resilient Mount

123008681
DIN95363-A75X45-NR55ST: RNCC: 2 | RNVC: 2
811.000.075.045.12X37.NR55.ST: RNCC: 5 | RNVC: 2
VRE810-45A: RNCC: 5 | RNVC: 2
1.75.45.1.55NR/ST: RNCC: 5 | RNVC: 2
81100-75X45-M12X37.NR55.ST: RNCC: 5 | RNVC: 2
VG95363-A75X45-NR55ST: RNCC: 5 | RNVC: 9
VRE810-45A: RNCC: 5 | RNVC: 9
VRE810/45A: RNCC: 5 | RNVC: 9

5 Sep 1984

5340-12-322-5561
Extension Drawer Slide

123225561
MEM16-5029G1: RNCC: 3 | RNVC: 2

31 Aug 1990

5340-12-158-7472
Plain Solid Disk

121587472
8371840376: RNCC: 3 | RNVC: 2
4798-666: RNCC: 5 | RNVC: 2
4798666: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-142-8672
Nonmetallic Bumper

121428672
8370780938: RNCC: 2 | RNVC: 2
98601801: RNCC: 3 | RNVC: 2
8370780938: RNCC: 3 | RNVC: 2
82200-8370780938: RNCC: 5 | RNVC: 2
8370780938: RNCC: 5 | RNVC: 2
4798-564: RNCC: 5 | RNVC: 2
4798564: RNCC: 5 | RNVC: 2
600339: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-6363
Electrical-Mechanical Equipment Post

121966363
5801505-2141.009: RNCC: 3 | RNVC: 2
5801505-2141-009: RNCC: 5 | RNVC: 2
5801505-2141.009: RNCC: 5 | RNVC: 9

26 Jul 1983

5340-12-180-8846
Angle Bracket

121808846
2500035-125000-00: RNCC: 2 | RNVC: 2
2500035-125000-00: RNCC: 5 | RNVC: 2
2500035-125000.00: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-180-2714
Butt Hinge

121802714
39-1033: RNCC: 2 | RNVC: 2
39-1033: RNCC: 3 | RNVC: 2

31 Aug 1979

5340-12-320-1017
Mounting Bracket

123201017
C334-A27-C57: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-322-3852
Webbing Strap

123223852
151M-5-N/1400MM: RNCC: 3 | RNVC: 2
708-137 002-001-0: RNCC: 5 | RNVC: 2
0120/036010-0002.01.00: RNCC: 5 | RNVC: 9
151M-5-N/1400: RNCC: 5 | RNVC: 9
151M-5-N/1400MM: RNCC: 5 | RNVC: 9

16 Aug 1990

5340-12-196-9818
Angle Bracket

121969818
4900059-222033.000.0: RNCC: 3 | RNVC: 2
4900059-222033-000-0: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-320-8454
Metallic Bumper

123208454
2300232-206200.009.0: RNCC: 2 | RNVC: 2
2300232-206200.009.0: RNCC: 3 | RNVC: 2
2300232-206200.009.02: RNCC: 5 | RNVC: 9

22 Feb 1990

5340-12-388-8314
Loop Clamp

123888314
DIN3016-1-D1-19X15-W1-2-NBR: RNCC: 2 | RNVC: 2

26 Apr 2012

5340-12-376-7749
Mounting Bracket

123767749
521D02703/1: RNCC: 3 | RNVC: 2
521D02502/1: RNCC: 5 | RNVC: 2
521D02703: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-12-309-5642
Metal Runner

123095642
WW 306 827: RNCC: 2 | RNVC: 2
WW 306 827: RNCC: 3 | RNVC: 9

4 Feb 1987

5340-12-194-4517
Loop Clamp

5340-12-167-2382
Dust And Moisture Seal Protective Cap-Plug

121672382
194906135: RNCC: 3 | RNVC: 9
194906135: RNCC: 5 | RNVC: 9

1 Dec 1976

5340-12-345-3944
Clamp Bolt Assembly

123453944
PAN6616: RNCC: 3 | RNVC: 2

10 Mar 1998

5340-12-326-2085
Double Angle Bracket

123262085
3964661240: RNCC: 3 | RNVC: 2
396 466 12 40: RNCC: 5 | RNVC: 2

16 Aug 1991

5340-12-143-0090

5340-12-303-8555
Nonmetallic Bumper

123038555
NO PRIMARY REF 12-303-8555: RNCC: 3 | RNVC: 2
6731 155138: RNCC: 5 | RNVC: 9

9 May 1985

5340-12-390-2155
Loop Clamp

123902155
533-040-100: RNCC: 3 | RNVC: 2

17 Oct 2012

5340-12-300-5752
Nonmetallic Bumper

123005752
2A444-0000-01: RNCC: 3 | RNVC: 2

16 Aug 1984

5340-12-186-7458
Double Angle Bracket

121867458
5802206-137000-001: RNCC: 2 | RNVC: 2
535.4236: RNCC: 3 | RNVC: 2
5354236: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-198-2924
Mending Plate

121982924
C42080-A6-C52: RNCC: 3 | RNVC: 2

11 Jan 1984

5340-12-197-5157
Bow Handle

121975157
258-120MM-ALBEL: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-12-333-8418
Manual Control Handle

123338418
4601.00100.330: RNCC: 3 | RNVC: 2
4601-00100-330: RNCC: 5 | RNVC: 2

16 Feb 1994

5340-12-360-2981
Loop Clamp

123602981
0009300118: RNCC: 3 | RNVC: 2
0009300118: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-353-0949
Mounting Plate

123530949
AFG0702142: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-12-321-4616
Access Cover

123214616
78203 56361: RNCC: 2 | RNVC: 2
7820356361: RNCC: 3 | RNVC: 2
78203 56361: RNCC: 5 | RNVC: 9

22 May 1990

5340-12-343-7201
Mounting Bracket

123437201
4126413Q: RNCC: 3 | RNVC: 2
WRYUG2045: RNCC: 5 | RNVC: 9

17 Jul 1997

5340-12-301-6077
Angle Bracket

123016077
2300107-310500.11: RNCC: 2 | RNVC: 2
2300107-310500.11: RNCC: 3 | RNVC: 2
2300107-310500.11: RNCC: 5 | RNVC: 9
2300107-310500.11: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-340-8444
Nonmetallic Bumper

123408444
181791401: RNCC: 2 | RNVC: 2
181791401: RNCC: 3 | RNVC: 2
181791401: RNCC: 3 | RNVC: 2
E181791401: RNCC: 5 | RNVC: 1

21 Jun 1996

5340-12-042-2489

5340-12-305-5980
Butt Hinge

123055980
4069805157: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-320-6580
Dust And Moisture Seal Protective Cap

123206580
32732301342: RNCC: 3 | RNVC: 2

5 Feb 1990

5340-12-320-7917
Access Door

123207917
2300232-206050.000.0: RNCC: 2 | RNVC: 2
2300232-206050.000.0: RNCC: 3 | RNVC: 2
9997023-206050.000.0: RNCC: 5 | RNVC: 2
2300232-206050.000.02: RNCC: 5 | RNVC: 9

16 Feb 1990

5340-12-187-4583
Angle Bracket

121874583
2300109-060000.001.0: RNCC: 2 | RNVC: 2
2300109-060000.001.0: RNCC: 3 | RNVC: 2
2300109-060000.001.0: RNCC: 3 | RNVC: 2
2300109-060000-001-0: RNCC: 5 | RNVC: 9
2300109-060000.001.0: RNCC: 5 | RNVC: 9
2300109-060000-001-0: RNCC: 5 | RNVC: 9
2300109-060000-001-0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-173-9332
Detent Plunger

121739332
2300005-4721-12: RNCC: 3 | RNVC: 2
2300005-4721-12: RNCC: 5 | RNVC: 9
2300005-4721-12: RNCC: 5 | RNVC: 9

23 May 1978

5340-12-342-5323
Manual Control Lever

123425323
2300421-181430.000: RNCC: 2 | RNVC: 2
9915769: RNCC: 3 | RNVC: 2
2300421-181430.000: RNCC: 5 | RNVC: 2
2300421-181430.000: RNCC: 5 | RNVC: 9
9915769: RNCC: 5 | RNVC: 9

25 Feb 1997

5340-12-196-3528
Mending Plate

121963528
P-855016-401: RNCC: 3 | RNVC: 2
P855016-401: RNCC: 5 | RNVC: 2

29 Jun 1983

5340-12-124-3097
Manual Control Handle

121243097
DIN99-N160: RNCC: 2 | RNVC: 2
N160DIN99: RNCC: 5 | RNVC: 2
E25XM20DIN99: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-350-0840
Mounting Plate

123500840
2125-111300.28B: RNCC: 2 | RNVC: 2
2125-111300.28B: RNCC: 3 | RNVC: 2

14 Feb 2000

5340-12-318-9954
Mending Plate

123189954
2654-330114.02: RNCC: 2 | RNVC: 2
2654-330114.02: RNCC: 3 | RNVC: 2
2654-330 114.02: RNCC: 5 | RNVC: 9
2654-330 114.02: RNCC: 5 | RNVC: 9
679-00060000.02: RNCC: 5 | RNVC: 9

30 Aug 1989

5340-12-367-6165
Mounting Plate

123676165
4100001-251700.022: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-12-350-1993
Access Cover

123501993
2125-113210.05B: RNCC: 2 | RNVC: 2
2125-113210.05B: RNCC: 3 | RNVC: 2

28 Feb 2000

5340-12-199-6593
Mending Plate

121996593
606.15-08-03-00-000: RNCC: 3 | RNVC: 2

19 May 1984

5340-12-171-1885
Dust And Moisture Seal Protective Cap

121711885
KS2914: RNCC: 3 | RNVC: 2
81964100278: RNCC: 5 | RNVC: 2
81.96410-0278: RNCC: 5 | RNVC: 2

16 Sep 1977

5340-12-368-4871
Angle Bracket

123684871
J53230022-003: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-12-386-0170
Access Cover

123860170
2500262-192900.008.0: RNCC: 3 | RNVC: 2

1 Aug 2011

5340-12-329-3511
Mending Plate

123293511
2500229-190000.025.0: RNCC: 3 | RNVC: 2

11 Aug 1992

5340-12-163-0036
Retaining Strap

121630036
VG95933GR-15X15X15-W1-BK: RNCC: 2 | RNVC: 2
3/2D15MMN325: RNCC: 3 | RNVC: 2
MMN325-3-2D15: RNCC: 5 | RNVC: 2
MMN325-3-2D9-15: RNCC: 5 | RNVC: 2
MMN325-3-2D15: RNCC: 5 | RNVC: 2
MMN325-3-2D9-15: RNCC: 5 | RNVC: 2
3-2D15MMN325: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-148-9378
Dust And Moisture Seal Protective Cap

121489378
23176-202100.36.0: RNCC: 2 | RNVC: 2
23176-202100.36.0: RNCC: 3 | RNVC: 2
23176-202100-36-0: RNCC: 5 | RNVC: 2
23176-202100-36-0: RNCC: 5 | RNVC: 9
23176-202100.36.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-361-4415
Retaining Bail

123614415
58165-635: RNCC: 3 | RNVC: 2

30 Sep 2003

5340-12-042-4079

5340-12-359-7238
Mechanical Stop

123597238
6410.114.000.063: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-193-0500
Retaining Strap

121930500
5809954168: RNCC: 3 | RNVC: 2

16 Jun 1982

5340-12-169-7543
Spring Tension Clip

121697543
A11A336150005: RNCC: 3 | RNVC: 2

6 Jun 1977

5340-12-388-5340
Mounting Plate

123885340
5872030640: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-12-329-4626
Key Blank

123294626
1032L: RNCC: 3 | RNVC: 2

21 Aug 1992

5340-12-185-2705
Bow Handle

121852705
CF327183: RNCC: 3 | RNVC: 2
CF327183: RNCC: 5 | RNVC: 2
CF 327 183: RNCC: 5 | RNVC: 2
CF 327 183: RNCC: 5 | RNVC: 2

25 Sep 1980

5340-12-147-4481
Loop Clamp

121474481
WAB112E04: RNCC: 3 | RNVC: 9
112EX4: RNCC: 5 | RNVC: 2
WAB112E04: RNCC: 5 | RNVC: 2
WAB112E04: RNCC: 5 | RNVC: 2
112EX4: RNCC: 5 | RNVC: 2
WAB112E04: RNCC: 5 | RNVC: 2
112EX4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-394-6188
Mounting Bracket

123946188
9025761A: RNCC: 3 | RNVC: 2
3226182: RNCC: 5 | RNVC: 2

19 Dec 2013

5340-12-095-0085

5340-12-022-7808

5340-12-311-9735
Expansion Plug

123119735
DIN443-A22-ST-A3P: RNCC: 2 | RNVC: 2
A22DIN443DBL8451.11: RNCC: 3 | RNVC: 2
000443022002: RNCC: 5 | RNVC: 2

5 Nov 1987

5340-12-193-3681
Spring Tension Clip

121933681
5800416-2401.024: RNCC: 3 | RNVC: 2
5800416-2401.024: RNCC: 5 | RNVC: 2
5800416-2401.024: RNCC: 5 | RNVC: 9

14 Jul 1982

5340-12-171-0837
Butt Hinge

121710837
81972016018: RNCC: 3 | RNVC: 2
9238: RNCC: 5 | RNVC: 2
81.97201-6018: RNCC: 5 | RNVC: 2

7 Sep 1977

5340-12-164-1254
Resilient Mount

121641254
1221-7346-03-11-00: RNCC: 3 | RNVC: 9

30 May 1969

5340-12-198-1430
Angle Bracket

121981430
5801999-131000.04: RNCC: 2 | RNVC: 2
5801999-131000.04: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-314-4297
Mending Plate

123144297
027532602: RNCC: 3 | RNVC: 2

6 Jul 1988

5340-12-364-4791
Mounting Bracket

123644791
2654-350030.00: RNCC: 2 | RNVC: 2
2654-350030.00: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-328-9076
Loop Clamp

123289076
069130531: RNCC: 3 | RNVC: 2
069130531: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-365-7072
Angle Bracket

123657072
5411870040: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-382-2144
Support Hook

123822144
M26349: RNCC: 3 | RNVC: 2

21 May 2010

5340-12-324-9375
Protection Bellows

123249375
2359TH56K: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-12-305-5624
Retaining Strap

123055624
303480: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-323-5798
Detent Plunger

123235798
7184 005: RNCC: 3 | RNVC: 2
1336789: RNCC: 5 | RNVC: 2
1336789: RNCC: 5 | RNVC: 2
VBZ7184005: RNCC: 5 | RNVC: 2

10 Dec 1990

5340-12-352-9876
Dust And Moisture Seal Protective Plug

123529876
H00074: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-333-2106
Angle Bracket

123332106
81671655012: RNCC: 2 | RNVC: 2
81671655012: RNCC: 3 | RNVC: 2
81.67165.5012: RNCC: 5 | RNVC: 2

10 Nov 1993

5340-12-303-1843
Angle Bracket

123031843
5631000504: RNCC: 3 | RNVC: 2

4 Mar 1985

5340-12-328-6303
Dust And Moisture Seal Protective Plug

123286303
491032: RNCC: 3 | RNVC: 2
0318570: RNCC: 5 | RNVC: 2
0318570: RNCC: 5 | RNVC: 2

10 Jun 1992

5340-12-196-2534
Access Cover

121962534
03462101: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-182-4745
Double Angle Bracket

121824745
183809689: RNCC: 3 | RNVC: 2

6 Feb 1980

5340-12-314-0414
Angle Bracket

123140414
6174311640: RNCC: 3 | RNVC: 2
617 431 16 40: RNCC: 5 | RNVC: 2

1 Jun 1988

5340-12-339-4083
Flush Lock

123394083
429620P1: RNCC: 3 | RNVC: 2

21 Nov 1995

5340-12-319-8879
Access Cover

123198879
3082 308 021: RNCC: 3 | RNVC: 2
3082308021: RNCC: 5 | RNVC: 9

14 Nov 1989

5340-12-386-5341
Angle Bracket

123865341
5561870440: RNCC: 3 | RNVC: 2

8 Sep 2011

5340-12-342-5735
Access Cover

123425735
4110617079: RNCC: 3 | RNVC: 2
4110017079: RNCC: 5 | RNVC: 2

28 Feb 1997

5340-12-315-2372
Angle Bracket

123152372
3954310540: RNCC: 3 | RNVC: 2
395 431 05 40: RNCC: 5 | RNVC: 2

5 Oct 1988

5340-12-366-9120
Mounting Bracket

123669120
2300399-184900.004.0: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-303-8062
Angle Bracket

123038062
6600117-621100.00: RNCC: 2 | RNVC: 2
6600117-621100.00: RNCC: 5 | RNVC: 9

6 May 1985

5340-12-340-7751
Mounting Plate

123407751
5801984-200300.012.0: RNCC: 2 | RNVC: 2
5801984-200300.012.0: RNCC: 3 | RNVC: 2

11 Jun 1996

5340-12-148-9243
Nonmetallic Bumper

121489243
23176-186000.02.0: RNCC: 2 | RNVC: 2
64030038: RNCC: 3 | RNVC: 2
837-23176-186000.02.0: RNCC: 5 | RNVC: 2
23176-186000-02-0: RNCC: 5 | RNVC: 2
23176-186000-02-0: RNCC: 5 | RNVC: 9
23176-186000.02.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-310-3338
Access Cover

123103338
0651601: RNCC: 3 | RNVC: 2
5340-12-178-1539: RNCC: 6 | RNVC: 9

11 May 1987

5340-12-342-2424
Access Cover

123422424
11105880026: RNCC: 3 | RNVC: 2
11.10588-0026: RNCC: 5 | RNVC: 2
11105880026: RNCC: 5 | RNVC: 2
11.10588-0026: RNCC: 5 | RNVC: 2
11.10588-0026: RNCC: 5 | RNVC: 2

9 Jan 1997

5340-12-177-2684
Handwheel

121772684
00002312001: RNCC: 3 | RNVC: 2
81.97005-0024: RNCC: 5 | RNVC: 2
81970050024: RNCC: 5 | RNVC: 2
E00002312001: RNCC: 5 | RNVC: 2

24 Jan 1979

5340-12-334-2170
Mounting Plate

123342170
272.1329.30-13: RNCC: 3 | RNVC: 2
272-1329-30-13: RNCC: 5 | RNVC: 2

13 Apr 1994

5340-12-179-0712
Mounting Bracket

121790712
2300061-222320.000: RNCC: 2 | RNVC: 2
2300061-222320.000: RNCC: 3 | RNVC: 2
2300061-222320: RNCC: 5 | RNVC: 9

6 Jun 1979

5340-12-164-5627
Angle Bracket

121645627
23290-187001.002: RNCC: 2 | RNVC: 2
23290-187001.002: RNCC: 3 | RNVC: 2
23290-187001.002: RNCC: 5 | RNVC: 9
23290-187001.002: RNCC: 5 | RNVC: 9
23290-187001-002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-310-3451
Mounting Bracket

123103451
6100133-400000.00: RNCC: 2 | RNVC: 2
6100133-400000.00: RNCC: 3 | RNVC: 2

13 May 1987

5340-12-312-9961
Nonmetallic Bumper

123129961
9MJ402357-01: RNCC: 3 | RNVC: 2
402357-01: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-12-363-0513
Lock-Release Lever

123630513
905000310: RNCC: 3 | RNVC: 2
81.65750-0037: RNCC: 5 | RNVC: 2
81657500037: RNCC: 5 | RNVC: 2

29 Apr 2004

5340-12-362-8527
Double Angle Bracket

123628527
51-76863-1: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-12-184-3884
Manual Control Handle

121843884
5801357-1921-00: RNCC: 2 | RNVC: 2
5801357-1921-00: RNCC: 5 | RNVC: 2
5801357-1921-00: RNCC: 5 | RNVC: 2

22 Jul 1980

5340-12-321-4893
Multiple Angle Bracket

123214893
702-183011-901-0: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-177-1580
Loop Clamp

121771580
5801215-0-098: RNCC: 3 | RNVC: 2
5801215-0.098: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-309-2448
Loop Clamp

123092448
DIN3016-1-B1-43X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-B1-43X20-W1-2: RNCC: 3 | RNVC: 2
RS0.43/20: RNCC: 3 | RNVC: 2
774222077: RNCC: 5 | RNVC: 2
04100020043: RNCC: 5 | RNVC: 2
4100020043: RNCC: 5 | RNVC: 2
RS43/20: RNCC: 5 | RNVC: 2
7742220: RNCC: 5 | RNVC: 9
DIN3016-B1-43X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-B43X20-W1: RNCC: 5 | RNVC: 9

6 Jan 1987

5340-12-364-2998
Mounting Bracket

123642998
598101-186610.001.0: RNCC: 3 | RNVC: 2

8 Sep 2004

5340-12-348-7434
Mounting Bracket

123487434
5900901241: RNCC: 3 | RNVC: 2
5900901241: RNCC: 5 | RNVC: 2
5900901241: RNCC: 5 | RNVC: 2

12 Aug 1999

5340-12-162-0373
Nonmetallic Bumper

121620373
0G015-3500: RNCC: 3 | RNVC: 2
OG015.3500: RNCC: 5 | RNVC: 2
OG0153500: RNCC: 5 | RNVC: 2
ZB640: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-362-3815
Butt Hinge

123623815
218-9213: RNCC: 3 | RNVC: 2

16 Feb 2004

5340-12-362-1576
Spring Tension Clip

123621576
13664: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-12-359-4603
Retaining Strap

123594603
A3618023100000: RNCC: 3 | RNVC: 2

6 Feb 2003

5340-12-349-3444
Nonmetallic Bumper

123493444
37 13 07 01: RNCC: 3 | RNVC: 2
37130701: RNCC: 5 | RNVC: 2

29 Oct 1999

5340-12-325-8750
Protection Bellows

123258750
K2854L03: RNCC: 3 | RNVC: 2
0002955983: RNCC: 5 | RNVC: 2

17 Jul 1991

5340-12-316-4394
Helical Compression Spring Retainer

123164394
3057736: RNCC: 3 | RNVC: 2

18 Jan 1989

5340-12-364-2035
Double Angle Bracket

123642035
9061440140: RNCC: 3 | RNVC: 2
548174: RNCC: 5 | RNVC: 2

1 Sep 2004

5340-12-166-6027
Door Handle

121666027
WW300974ER: RNCC: 3 | RNVC: 9
WW 300 974 ER: RNCC: 5 | RNVC: 2
WW300974ER: RNCC: 5 | RNVC: 2
WW 300 974 ER: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-351-5077
Double Angle Bracket

123515077
4638890114: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-180-0564
Webbing Strap

121800564
3827900896: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-317-0000
Mounting Bracket

123170000
2300279-5091.00: RNCC: 2 | RNVC: 2
9872090: RNCC: 3 | RNVC: 2
2300279-5091.00: RNCC: 5 | RNVC: 2
2300279-5091.00: RNCC: 5 | RNVC: 9
9872090: RNCC: 5 | RNVC: 9

2 Mar 1989

5340-12-316-6556
Dust And Moisture Seal Protective Plug

123166556
S12I: RNCC: 3 | RNVC: 2

31 Jan 1989

5340-12-332-7194
Nonmetallic Bumper

123327194
00098347560: RNCC: 3 | RNVC: 9
9834756: RNCC: 5 | RNVC: 9
108-516000.002: RNCC: 5 | RNVC: 9

10 Sep 1993

5340-12-388-7566
Mechanic Equipment Hardware Kit

123887566
2258528: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-301-8582
Lock-Release Lever

123018582
537172-8224.000: RNCC: 2 | RNVC: 2
537172-8224.000: RNCC: 3 | RNVC: 2
537172-8224.000: RNCC: 5 | RNVC: 9

14 Nov 1984

5340-12-011-6130

5340-12-094-6272

5340-12-189-7605
Lock-Release Lever

121897605
0000463101-04-09: RNCC: 3 | RNVC: 2
M260000463101-04-09: RNCC: 5 | RNVC: 2
M260000463101-04-09: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-353-9924
Rod End Clevis

123539924
AFG072345-01: RNCC: 3 | RNVC: 2

28 May 2001

5340-12-172-8291
Double Angle Bracket

121728291
23290-091104: RNCC: 2 | RNVC: 2
23290-091104: RNCC: 5 | RNVC: 2

27 Feb 1978

5340-12-198-4799
Nonmetallic Bumper

121984799
0000463101-01-17: RNCC: 3 | RNVC: 2
M260000463101-01-17: RNCC: 5 | RNVC: 2
M260000463101-01-17: RNCC: 5 | RNVC: 9

1 Feb 1984

5340-12-340-6091
Runner

123406091
SH1.190.032.13: RNCC: 2 | RNVC: 2
SH1.190.032.13: RNCC: 3 | RNVC: 2
SH1.190.032-TEIL 2: RNCC: 5 | RNVC: 2

10 May 1996

5340-12-379-9207
Slide Keeper

123799207
242-2552-06-10-00: RNCC: 3 | RNVC: 2

11 Sep 2009

5340-12-187-5240
Dust And Moisture Seal Protective Plug

121875240
04459309: RNCC: 3 | RNVC: 2
4459309EE5091-11: RNCC: 5 | RNVC: 2

13 Apr 1981

5340-12-307-3484
Handwheel

123073484
0440-0054T: RNCC: 3 | RNVC: 2

6 Jun 1986

5340-12-339-3149
Mounting Bracket

123393149
03439943: RNCC: 3 | RNVC: 2
3439943EZ5505-29: RNCC: 5 | RNVC: 2
3439943: RNCC: 5 | RNVC: 9

8 Nov 1995

5340-12-332-5058
Bridge Clamp

123325058
5803523-163000.003: RNCC: 2 | RNVC: 2
7070625: RNCC: 3 | RNVC: 2
707.0625: RNCC: 5 | RNVC: 2

17 Aug 1993

5340-12-182-8987
Hasp Staple

121828987
100332-019200.16: RNCC: 2 | RNVC: 2
3200003: RNCC: 3 | RNVC: 2

4 Mar 1980

5340-12-381-2950
Mounting Plate

123812950
424-04-IB1: RNCC: 3 | RNVC: 2
4250473100448: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-321-8465
Access Cover

123218465
C117-A44-C74: RNCC: 2 | RNVC: 2
C117-A44-C74: RNCC: 3 | RNVC: 2

3 Jul 1990

5340-12-302-6663
Mending Plate

123026663
41.36.42.00.23-7: RNCC: 3 | RNVC: 2
41-36-42-00-23-7: RNCC: 5 | RNVC: 2

22 Jan 1985

5340-12-372-0114
Spacing Threaded Standoff

123720114
88086-M4X30/12/7: RNCC: 3 | RNVC: 2
88086-M4X30SW7: RNCC: 5 | RNVC: 2

11 Jun 2007

5340-12-159-3302
Compression Cup

121593302
H15-5-MF-80NBR/709: RNCC: 3 | RNVC: 2
H15-5-709-09976-24: RNCC: 5 | RNVC: 2
H15-5MF80NBR709: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-368-0551
Mechanic Equipment Hardware Kit

123680551
3-420.6800D/14: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-12-300-3124
Angle Bracket

123003124
3098820442: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-388-4478
Section Block Clamp

123884478
5849956268: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-325-2304
Webbing Strap

123252304
7233901: RNCC: 3 | RNVC: 2

17 May 1991

5340-12-199-8763
Mending Plate

121998763
653.3039: RNCC: 3 | RNVC: 2
6533039: RNCC: 5 | RNVC: 2

9 Jun 1984

5340-12-387-6663
Casement Fastener

123876663
220-9309: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-12-300-3550
Mending Plate

123003550
100561: RNCC: 3 | RNVC: 2

26 Jul 1984

5340-12-135-6758

5340-12-352-2955
Loop Clamp

123522955
5205572: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-381-4412
Angle Bracket

123814412
S252M3589120: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-12-010-0866

5340-12-322-5727
Mounting Plate

123225727
5800777-3070: RNCC: 2 | RNVC: 2
5800777-3070: RNCC: 3 | RNVC: 2

3 Sep 1990

5340-12-186-9343
Angle Bracket

121869343
A87-92004: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-12-342-4179
Spring Tension Clip

123424179
605215608: RNCC: 3 | RNVC: 2
029-0263-000: RNCC: 3 | RNVC: 2
0005450673: RNCC: 5 | RNVC: 2

5 Feb 1997

5340-12-133-0538
Nonmetallic Bumper

121330538
VG95400H40: RNCC: 2 | RNVC: 2
82200-VG95400H40: RNCC: 3 | RNVC: 2
583884102: RNCC: 5 | RNVC: 2
500.016: RNCC: 5 | RNVC: 2
D40VG95402: RNCC: 5 | RNVC: 2
3884102: RNCC: 5 | RNVC: 2
583884102: RNCC: 5 | RNVC: 9
7314: RNCC: 5 | RNVC: 9
583884102: RNCC: 5 | RNVC: 9
2541: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-7755
Angle Bracket

121887755
5801479-3270.01: RNCC: 2 | RNVC: 2
5801479-3270.01: RNCC: 3 | RNVC: 2
5801479-3270-01: RNCC: 5 | RNVC: 2
5801479-3270-01: RNCC: 5 | RNVC: 9
5801479-3270.01: RNCC: 5 | RNVC: 9

29 Jul 1981

5340-12-369-2871
Dust And Moisture Seal Protective Plug

123692871
TDP-437SW: RNCC: 3 | RNVC: 2
351105 SW: RNCC: 5 | RNVC: 2

14 Jun 2006

5340-12-184-1271
Retaining Strap

121841271
10621-01: RNCC: 3 | RNVC: 2
465752-001: RNCC: 5 | RNVC: 9

26 Jun 1980

5340-12-125-2738
Loop Clamp

121252738
DIN3016-1-D1-12X9-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-12X9-W1-2: RNCC: 3 | RNVC: 2
RSGU1.12/9: RNCC: 3 | RNVC: 2
9410009012: RNCC: 5 | RNVC: 2
RSGU1100-12-9: RNCC: 5 | RNVC: 2
RSGU1100.12/9: RNCC: 5 | RNVC: 2
DIN3016-D1-12X9-W1-2: RNCC: 5 | RNVC: 9
VG95931D12X9W1: RNCC: 5 | RNVC: 9
VG95931-D12X9-W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-163-8299
Rod End Connector

121638299
26-21C1090P010: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-332-8476
Double Angle Bracket

123328476
1361235-16037-00: RNCC: 3 | RNVC: 2

27 Sep 1993

5340-12-193-5961
Angle Bracket

121935961
60080-101: RNCC: 3 | RNVC: 2

9 Aug 1982

5340-12-322-1926
Door Holder

123221926
05007-00: RNCC: 3 | RNVC: 2
000 720 03 16: RNCC: 5 | RNVC: 2
0007200316: RNCC: 5 | RNVC: 2

31 Jul 1990

5340-12-311-8204
Lock-Release Lever

123118204
1000042-193610.06M01: RNCC: 3 | RNVC: 2
1000042-193610.06: RNCC: 3 | RNVC: 2

20 Oct 1987

5340-12-394-4625
Pipe Bracket

123944625
H1.4558-30-02-14.65-00: RNCC: 3 | RNVC: 2

4 Dec 2013

5340-12-366-4412
Block Clamp

123664412
F11.43386-0296: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-12-343-2430
Clamping Catch

123432430
VG95528B115-ST: RNCC: 2 | RNVC: 2
VG95528-B115-ST: RNCC: 3 | RNVC: 2
2801: RNCC: 5 | RNVC: 2

22 May 1997

5340-12-351-0473
Nonmetallic Solid Wheel

123510473
2500113-2400.13: RNCC: 2 | RNVC: 2
2500113-2400.13: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-191-6908
Pad Eye

121916908
C22136-A1000-C7: RNCC: 3 | RNVC: 2
C22136A1000C7: RNCC: 5 | RNVC: 9

23 Feb 1982

5340-12-178-7797
Mounting Bracket

121787797
10572-01: RNCC: 3 | RNVC: 2
477419: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-388-2105
Mounting Plate

123882105
F1.1697-00-03-10.00-12: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-12-319-8435
Resilient Mount

123198435
DIN95369-A1-1-8,3-M-ST: RNCC: 2 | RNVC: 2
1340102011: RNCC: 3 | RNVC: 2
151001-8,3-HD.ST-40: RNCC: 5 | RNVC: 2
151001-8,3MM BOHRUNG-HD.ST-40: RNCC: 5 | RNVC: 2
6010040HDS-8,3MM BOHRUNG: RNCC: 5 | RNVC: 2
VG95369-A1-1-8,3-MVQ-H-ST: RNCC: 5 | RNVC: 9
C1010HDS8,3: RNCC: 5 | RNVC: 9
C1010HDS8,3MM BOHRUNG: RNCC: 5 | RNVC: 9
C1010HDS8.3: RNCC: 5 | RNVC: 9

9 Nov 1989

5340-12-185-7189
Retaining Strap

121857189
23176-020000.10.0: RNCC: 2 | RNVC: 2
23176-020000-10-0: RNCC: 5 | RNVC: 2
23176-020000.10.0: RNCC: 5 | RNVC: 2
23176-020000-10-0: RNCC: 5 | RNVC: 2
23176-020000-10-0: RNCC: 5 | RNVC: 9

25 Oct 1980

5340-12-155-7458
Resilient Mount

121557458
80708201: RNCC: 3 | RNVC: 2
420-104-B-00.00: RNCC: 3 | RNVC: 2
420-104-B-00.00: RNCC: 5 | RNVC: 2
845.420-104B00-00: RNCC: 5 | RNVC: 2
420-104B00-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-392-9813
Dust And Moisture Seal Protective Cap

123929813
4000004436: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-12-301-2393
Mending Plate

123012393
4179263: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-188-0622
Retaining Strap

121880622
056016009: RNCC: 3 | RNVC: 2

1 Jun 1981

5340-12-393-2433
Spacing Threaded Standoff

123932433
DI10-M6X70: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-12-380-3641
Runner

123803641
4257521622: RNCC: 3 | RNVC: 2

22 Oct 2009

5340-12-349-1902
Metal Grille

123491902
90059 29918: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-363-0271
Cushioning Pad

123630271
5300.111.010.011: RNCC: 3 | RNVC: 2

27 Apr 2004

5340-12-375-1884
Access Cover

123751884
L311M3817101: RNCC: 3 | RNVC: 2

30 Apr 2008

5340-12-351-4331
Mechanical Stop

123514331
T671M1012205: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-12-393-3301
Permanent Magnet

123933301
152036450: RNCC: 3 | RNVC: 2
152036450: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-12-352-2666
Elastic Strap

123522666
2300459-412500.010: RNCC: 2 | RNVC: 2
02700132900: RNCC: 3 | RNVC: 2
2300459-412500.010: RNCC: 5 | RNVC: 2
2300459-412500.010: RNCC: 5 | RNVC: 9
9932862: RNCC: 5 | RNVC: 9

31 Oct 2000

5340-12-349-7822
Loop Clamp

123497822
T290M00X1004: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-324-8798
Angle Bracket

123248798
702-731140-922-0: RNCC: 3 | RNVC: 2

4 Apr 1991

5340-12-091-2536

5340-12-125-9098

5340-12-358-2876
Dust And Moisture Seal Protective Cap

123582876
70186878801C: RNCC: 3 | RNVC: 2

8 Oct 2002

5340-12-381-7448
Dust And Moisture Seal Protective Plug

123817448
290 05757: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-12-335-5544
Spring Tension Clip

123355544
4604702881: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-12-179-6013
Resilient Mount

121796013
1802231212: RNCC: 3 | RNVC: 2
57420780042: RNCC: 5 | RNVC: 2
742078: RNCC: 5 | RNVC: 2
742078MITTEL: RNCC: 5 | RNVC: 2

11 Jul 1979

5340-12-346-4205
Mounting Plate

123464205
2300348-970450.001.0: RNCC: 2 | RNVC: 2
2300348-970450.001.0: RNCC: 3 | RNVC: 2
1808565: RNCC: 5 | RNVC: 2

24 Jul 1998

5340-12-301-7426
Nonmetallic Bumper

123017426
4178749: RNCC: 3 | RNVC: 2
S12B.K02.05.03.002: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-321-4210
Retaining Strap

123214210
5559951568: RNCC: 3 | RNVC: 2

17 May 1990

5340-12-338-9631
Butt Hinge

123389631
49.50 62 02: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-12-023-0863

5340-12-307-8217
Mending Plate

123078217
NO PRIMARY REF 12-307-8217: RNCC: 3 | RNVC: 2
F27472: RNCC: 5 | RNVC: 9

30 Jul 1986

5340-12-192-4686
Catch Strike

121924686
20L02-1-1AA: RNCC: 3 | RNVC: 2

27 Apr 1982

5340-12-361-7618
Retaining Strap

123617618
110PP-US-IS: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-12-363-9077
Runner

123639077
J92226821-001: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-701-3902
Loop Clamp

127013902
VG95211-ML-127013902: RNCC: 2 | RNVC: 2
5.12.5311.1000.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-129-2796
Manual Control Lever

121292796
10.206.03.18: RNCC: 3 | RNVC: 2
10-206-03-18: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-353-1808
Dust And Moisture Seal Protective Cap

123531808
VG95211-ML-123531808: RNCC: 2 | RNVC: 2
L069632: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-185-8761
Electrical-Mechanical Equipment Post

121858761
37 061-002: RNCC: 3 | RNVC: 2
37061-002: RNCC: 5 | RNVC: 2

6 Nov 1980

5340-12-324-0212
Angle Bracket

123240212
7800014601: RNCC: 3 | RNVC: 2
5802233-040500.001: RNCC: 5 | RNVC: 9
78000 14601: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-12-315-1182
Mounting Bracket

123151182
C249-A33-B36: RNCC: 2 | RNVC: 2
C249-A33-B36: RNCC: 3 | RNVC: 2

17 Sep 1988

5340-12-176-1912
Retaining Clip

121761912
CF418997B: RNCC: 3 | RNVC: 2
CF 418 997 B: RNCC: 5 | RNVC: 2
CF418997B: RNCC: 5 | RNVC: 2
CF 418 997 B: RNCC: 5 | RNVC: 2
CF418997B: RNCC: 5 | RNVC: 2
CF 418 997 B: RNCC: 5 | RNVC: 2

13 Nov 1978

5340-12-366-7613
Arched Cushion

123667613
504-122930.011: RNCC: 2 | RNVC: 2
504-122930.011: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-12-377-0271
Section Block Clamp

123770271
1-3275: RNCC: 3 | RNVC: 2
3325988: RNCC: 5 | RNVC: 2

8 Dec 2008

5340-12-392-3283
Mounting Plate

123923283
4100095-982140.010.0: RNCC: 2 | RNVC: 2
4100095-982140.010.0: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-354-9257
Butt Hinge

123549257
P-876113-014: RNCC: 3 | RNVC: 2
P876113-014: RNCC: 5 | RNVC: 2

6 Sep 2001

5340-12-328-9768
Access Cover

123289768
3/0439/9129/1: RNCC: 3 | RNVC: 2
3/0439/9129/1: RNCC: 5 | RNVC: 2
3/0439/9129/0: RNCC: 5 | RNVC: 2

4 Jul 1992

5340-12-361-6351
Mounting Plate

123616351
704-121421-911-0: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-12-313-1628
Dust And Moisture Seal Protective Cap

123131628
250/70: RNCC: 3 | RNVC: 2
7.33.6-15.22.10-01: RNCC: 5 | RNVC: 2

9 Mar 1988

5340-12-180-3116
Angle Bracket

121803116
42035521: RNCC: 3 | RNVC: 2
42035521EE5035-71: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-024-3164

5340-12-025-0825

5340-12-391-0386
Bail Handle

123910386
100002397: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-12-002-0128

5340-12-004-3829

5340-12-010-0827

5340-12-305-5626
Retaining Strap

123055626
297369: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-306-6246
Mending Plate

123066246
105-82734.08: RNCC: 3 | RNVC: 2

14 Mar 1986

5340-12-311-3040
Mending Plate

123113040
304T24003: RNCC: 3 | RNVC: 2

14 Aug 1987

5340-12-307-1570
Clamping Catch

123071570
4168900110: RNCC: 3 | RNVC: 2

15 May 1986

5340-12-327-9505
Mending Plate

123279505
5803482-660001.01: RNCC: 2 | RNVC: 2
5803482-660001.01: RNCC: 3 | RNVC: 2

21 Mar 1992

5340-12-348-4604
Access Cover

123484604
100065295: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-12-305-4286
Rod End Clevis

123054286
54.0028.356.03: RNCC: 3 | RNVC: 2

5 Nov 1985

5340-12-305-6740
Split Tubular Clip

123056740
3250021126: RNCC: 3 | RNVC: 2
32500 21126: RNCC: 5 | RNVC: 9

3 Dec 1985

5340-12-305-5635
Retaining Strap

123055635
502331: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-388-5290
Angle Bracket

123885290
4195510140: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-12-369-9055
Dust And Moisture Seal Boot

123699055
6-382530 (306): RNCC: 3 | RNVC: 2

24 Aug 2006

5340-12-317-8242
Helical Compression Spring Retainer

123178242
4/0993/7002/1: RNCC: 3 | RNVC: 2

17 May 1989

5340-12-022-6054

5340-12-333-4479
Angle Bracket

123334479
81974870476: RNCC: 2 | RNVC: 2
81974870476: RNCC: 3 | RNVC: 2
81.97487.0476: RNCC: 5 | RNVC: 2

16 Dec 1993

5340-12-172-6149
Dust And Moisture Seal Protective Cap

121726149
021101109: RNCC: 3 | RNVC: 2

31 Jan 1978

5340-12-309-7766
Access Cover

123097766
6183527: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-195-0683
Nonmetallic Bumper

121950683
557.7809: RNCC: 3 | RNVC: 2
5577809: RNCC: 5 | RNVC: 2

10 Jan 1983

5340-12-328-3529
Dust And Moisture Seal Protective Plug

123283529
1109870744: RNCC: 3 | RNVC: 2

8 May 1992

5340-12-333-0669
Loop Clamp

123330669
1203 4450: RNCC: 3 | RNVC: 2
1203 4450: RNCC: 5 | RNVC: 9
12034450: RNCC: 5 | RNVC: 9
3.602.0.977.022.4: RNCC: 5 | RNVC: 9

26 Oct 1993

5340-12-365-1334
Mounting Bracket

123651334
1837-380100.003.0: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-12-304-6301
Door Handle

123046301
4422Y/F: RNCC: 3 | RNVC: 2
7404636: RNCC: 5 | RNVC: 2
7401997: RNCC: 5 | RNVC: 9

6 Aug 1985

5340-12-182-8197
Dust And Moisture Seal Protective Cap

121828197
48335-4: RNCC: 3 | RNVC: 2

27 Feb 1980

5340-12-351-7972
Mounting Bracket

123517972
1421329057: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-12-317-4977
Angle Bracket

123174977
CF 207 674 B: RNCC: 3 | RNVC: 2
CF 207 674 B: RNCC: 5 | RNVC: 2

13 Apr 1989

5340-12-351-6548
Mounting Plate

123516548
120001304: RNCC: 2 | RNVC: 2
120001304: RNCC: 3 | RNVC: 2

14 Aug 2000

5340-12-365-8824
Section Block Clamp

123658824
105-80041.07: RNCC: 3 | RNVC: 2

16 Feb 2005

5340-12-393-5076
Double Angle Bracket

123935076
4164780040: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-165-5686
Helical Compression Spring Seat

121655686
2360-120020.23.0: RNCC: 2 | RNVC: 2
5077 310 015: RNCC: 3 | RNVC: 2
2360-120020.23.0: RNCC: 5 | RNVC: 2
5077310015: RNCC: 5 | RNVC: 2
2360-120020.23.0: RNCC: 5 | RNVC: 2
2360-120020.23.0: RNCC: 5 | RNVC: 9
02.2207-0019.1: RNCC: 5 | RNVC: 9
2220700191: RNCC: 5 | RNVC: 9
2360-120020-23-0: RNCC: 5 | RNVC: 9

1 Jun 1976

5340-12-356-2622
Access Cover

123562622
2125-121423B03B: RNCC: 2 | RNVC: 2
2125-121423B03B: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-12-319-9664
Bow Handle

123199664
VG95149B120,6X38XM4GAL-FB: RNCC: 2 | RNVC: 2
409040419: RNCC: 3 | RNVC: 2
409.040419: RNCC: 5 | RNVC: 2
5L.3731.001.64: RNCC: 5 | RNVC: 2
5L.3731.001.64: RNCC: 5 | RNVC: 2
409-040 419: RNCC: 5 | RNVC: 9

23 Nov 1989

5340-12-324-6109
Bow Handle

123246109
61L36-2-1-AD: RNCC: 3 | RNVC: 2
61L3621AD: RNCC: 5 | RNVC: 2

6 Mar 1991

5340-12-373-2105
Dust And Moisture Seal Protective Plug

123732105
EE-M0024-21: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-12-306-7465
Helical Compression Spring Seat

123067465
4900189-190000.02: RNCC: 2 | RNVC: 2
4900189-190000.02: RNCC: 3 | RNVC: 2

26 Mar 1986

5340-12-360-6569
Double Angle Bracket

123606569
T41688109: RNCC: 3 | RNVC: 2
63-T41688109: RNCC: 5 | RNVC: 2

25 Jun 2003

5340-12-311-9343
Mending Plate

123119343
288133377: RNCC: 3 | RNVC: 2
3501-100.00.00.003-000: RNCC: 5 | RNVC: 2

30 Oct 1987

5340-12-151-8292
Double Angle Bracket

121518292
1292051-010000.001: RNCC: 3 | RNVC: 2
1292051-010000.001: RNCC: 5 | RNVC: 9
1292051-010000-001: RNCC: 5 | RNVC: 9
1292051-010000.001: RNCC: 5 | RNVC: 9
1292051-010000-001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-362-9392
Manual Control Handle

123629392
20808-137: RNCC: 3 | RNVC: 2

17 Apr 2004

5340-12-131-4147
Rod End Clevis

121314147
DIN71752-G10X20-CUZN39PB2F22: RNCC: 2 | RNVC: 2
G10X20DIN71752-CUZN39PB2F44: RNCC: 3 | RNVC: 2
DIN71752-G10X20-CUZN39PB2F22: RNCC: 3 | RNVC: 2
DIN71752-G10X20-CUZN39PB2F22: RNCC: 3 | RNVC: 2
G10X20DIN71752MS: RNCC: 5 | RNVC: 2
100200581020/000: RNCC: 5 | RNVC: 2
DIN71752-G10X20-CUZN39PB2F22: RNCC: 5 | RNVC: 2
G10X20DIN71752-CUZN39PB2F22: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-162-7620
Double Angle Bracket

121627620
21 643-001: RNCC: 3 | RNVC: 2
21643-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-326-3949
Resilient Mount

123263949
DIN95363-B50X30-M10X20-NR40ST: RNCC: 2 | RNVC: 2
510036-M10X20.NR40.ST: RNCC: 5 | RNVC: 2
279.610 934: RNCC: 5 | RNVC: 2
VG95363-B50X30-M10X20-NR40ST: RNCC: 5 | RNVC: 9
1300839-070037.001: RNCC: 5 | RNVC: 9

11 Sep 1991

5340-12-199-2158
Handwheel

121992158
29-280/50X6: RNCC: 3 | RNVC: 2

4 Apr 1984

5340-12-199-7086
Nonmetallic Solid Wheel

121997086
076.1452/85X100: RNCC: 3 | RNVC: 2
E99.20036.07.951A: RNCC: 5 | RNVC: 2
0761390: RNCC: 5 | RNVC: 9

24 May 1984

5340-12-343-1179
Catch Strike

123431179
6002-024: RNCC: 3 | RNVC: 2

2 May 1997

5340-12-315-1410
Mending Plate

123151410
5803654-3000.01: RNCC: 2 | RNVC: 2
7802023301: RNCC: 3 | RNVC: 2
5803654-3000.01: RNCC: 5 | RNVC: 2
78020 23301: RNCC: 5 | RNVC: 9

22 Sep 1988

5340-12-340-6098
Plug Button

123406098
20.2423.410: RNCC: 3 | RNVC: 2
909734081: RNCC: 5 | RNVC: 2
242 G-4 SW: RNCC: 5 | RNVC: 2

10 May 1996

5340-12-317-5146
Retaining Strap

123175146
61712206: RNCC: 3 | RNVC: 2
6-1712-206: RNCC: 5 | RNVC: 2

14 Apr 1989

5340-12-143-7930
Resilient Mount

121437930
845-8E323.99.0-083-CR55.ST: RNCC: 3 | RNVC: 2
8E32399-0-083: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-333-2887
Resilient Mount

123332887
38990 24719: RNCC: 2 | RNVC: 2
38990 24719: RNCC: 3 | RNVC: 2
BDL2242024002SATZ4STUECK/SCHILD: RNCC: 3 | RNVC: 2
3899024719: RNCC: 5 | RNVC: 2
PDG2-S1 SATZ 4 STUECK MIT SCHILD: RNCC: 5 | RNVC: 2
BDL2242024002SATZ4STUECK/SCHILD: RNCC: 5 | RNVC: 2
38990 24719: RNCC: 5 | RNVC: 9

19 Nov 1993

5340-12-152-6648
Compression Cup

121526648
H80-3-88NBR/101: RNCC: 3 | RNVC: 2
H80-3-88NBR101: RNCC: 5 | RNVC: 2
H80-3: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-165-5687
Helical Compression Spring Seat

121655687
2360-120020.26.0: RNCC: 2 | RNVC: 2
5077 310 014: RNCC: 3 | RNVC: 2
2360-120020.26.0: RNCC: 5 | RNVC: 2
5077310014: RNCC: 5 | RNVC: 2
2360-120020.26.0: RNCC: 5 | RNVC: 2
2220700181: RNCC: 5 | RNVC: 9
02.2207-0018.1: RNCC: 5 | RNVC: 9
2360-120020-26-0: RNCC: 5 | RNVC: 9
2360-120020.26.0: RNCC: 5 | RNVC: 9

1 Jun 1976

5340-12-354-6119
Flush Catch

123546119
6.375-109.0: RNCC: 3 | RNVC: 2

8 Aug 2001

5340-12-162-8618
Quick Release Plunger

121628618
4-7828-711: RNCC: 3 | RNVC: 9
1092107-3605-002: RNCC: 5 | RNVC: 9
7828-711: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-4612
Loop Clamp

127014612
VG95211-ML-127014612: RNCC: 2 | RNVC: 2
5.12.5314.8060.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-310-3620
Resilient Mount

123103620
5205 HT HDS: RNCC: 3 | RNVC: 2
155016-M8-HD.ST-40: RNCC: 3 | RNVC: 2
60-52-05-H-HD-M8: RNCC: 5 | RNVC: 2
VG95406-N4-3-Q-H-ST: RNCC: 5 | RNVC: 9
5205 HT HDS: RNCC: 5 | RNVC: 9

14 May 1987

5340-12-175-8198
Plug Button

121758198
4352670083: RNCC: 3 | RNVC: 2

23 Oct 1978

5340-12-330-1220
Angle Bracket

123301220
1120-80617.06: RNCC: 3 | RNVC: 2

5 Nov 1992

5340-12-182-6312
Retaining Strap

121826312
0287 4636: RNCC: 3 | RNVC: 2
2874636: RNCC: 5 | RNVC: 2
2874636EE0704-77: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-12-196-8619
Retaining Band

121968619
YK2152214: RNCC: 3 | RNVC: 2
2152214EZ0170-43: RNCC: 5 | RNVC: 9
0215 2214: RNCC: 5 | RNVC: 9
2152214: RNCC: 5 | RNVC: 9

25 Aug 1983

5340-12-341-8833
Dust And Moisture Seal Protective Cap

123418833
100024088: RNCC: 3 | RNVC: 2
10 0024 088: RNCC: 5 | RNVC: 2

12 Nov 1996

5340-12-342-4853
Mounting Bracket

123424853
4615201741: RNCC: 3 | RNVC: 2
461 520 17 41: RNCC: 5 | RNVC: 2

18 Feb 1997

5340-12-365-5946
Mounting Bracket

123655946
T251M4008102: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-368-6952
Manual Control Lever

123686952
4617500223: RNCC: 3 | RNVC: 2
461 750 02 23: RNCC: 5 | RNVC: 2

7 Apr 2006

5340-12-392-3605
Retaining Strap

123923605
I011148: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-022-8648

5340-12-091-4487

5340-12-091-3383

5340-12-168-1265
Dust And Moisture Seal Protective Plug

121681265
LN29843M22X1-5: RNCC: 2 | RNVC: 2

18 Feb 1977

5340-12-379-9489
Mounting Bracket

123799489
1557927: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-300-3127
Pipe Bracket

123003127
3096150032: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-179-5414
Bow Handle

121795414
CF3260000X: RNCC: 3 | RNVC: 2
CF 326 000 -X: RNCC: 5 | RNVC: 2
CF 326 000 -X: RNCC: 5 | RNVC: 2
CF3260000X: RNCC: 5 | RNVC: 2
CF3260000X: RNCC: 5 | RNVC: 2
CF 326 000 -X: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-377-3802
Mounting Bracket

123773802
0420 9136: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-011-0575

5340-12-044-1568

5340-12-327-6694
Dust And Moisture Seal Protective Cap

123276694
542576: RNCC: 3 | RNVC: 9

17 Feb 1992

5340-12-327-4442
Protection Bellows

123274442
11221412201: RNCC: 3 | RNVC: 2

22 Jan 1992

5340-12-334-3222
Mounting Bracket

123343222
4944201086: RNCC: 3 | RNVC: 2
947169: RNCC: 5 | RNVC: 2
947169: RNCC: 5 | RNVC: 9

27 Apr 1994

5340-12-390-5753
Mounting Bracket

123905753
10187-188329.000.0: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-12-388-1825
Section Block Clamp

123881825
1030105-206200.001.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-393-5665
Mounting Bracket

123935665
4100098-722020.004.0: RNCC: 2 | RNVC: 2
4100098-722020.004.0: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-390-0818
Mounting Bracket

123900818
DF 306 057 A: RNCC: 3 | RNVC: 2
DF 306 057 A: RNCC: 5 | RNVC: 2

2 Oct 2012

5340-12-387-5009
Double Angle Bracket

123875009
X51599100005: RNCC: 3 | RNVC: 2

3 Jan 2012

5340-12-172-8896
Nonmetallic Bumper

121728896
171253147: RNCC: 3 | RNVC: 2
758.1.18.027.1: RNCC: 5 | RNVC: 2
171 253 147: RNCC: 5 | RNVC: 2
758.1.18.027.1: RNCC: 5 | RNVC: 2

2 Mar 1978

5340-12-157-8777
Loop Clamp

121578777
DIN3016-1-D2-15-15X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-15-15X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.2X15/15: RNCC: 3 | RNVC: 2
RSGU1100.2X15/15: RNCC: 5 | RNVC: 2
4219215015: RNCC: 5 | RNVC: 2
RSGU1100-2X15-15: RNCC: 5 | RNVC: 2
DIN3016-D2-15-15X15-W1-2: RNCC: 5 | RNVC: 9
FH70-81-3-2702: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-701-5225
Retaining Strap

127015225
VG95211-ML-127015225: RNCC: 2 | RNVC: 2
5.12.6100.8019.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-306-4957
Angle Bracket

123064957
P-295435-442: RNCC: 3 | RNVC: 2
P295435-442: RNCC: 5 | RNVC: 2

5 Mar 1986

5340-12-315-2598
Metallic Solid Wheel

123152598
4-358-0005: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-12-166-1708
Spring Tension Clip

121661708
C20136A14C679: RNCC: 3 | RNVC: 2
TDRUCK4T1679: RNCC: 5 | RNVC: 2
C20136-A14-C679: RNCC: 5 | RNVC: 2

10 Aug 1976

5340-12-325-3530
Dust And Moisture Seal Protective Cap

123253530
800/7/16"-20UNF: RNCC: 3 | RNVC: 2
GPN800,7/16IN-20UNF: RNCC: 5 | RNVC: 2
GPN800,7/16IN-20UNF FORM A: RNCC: 5 | RNVC: 2
GPN800/7/16"-20UNF: RNCC: 5 | RNVC: 2

28 May 1991

5340-12-363-9058
Butt Hinge Leaf

123639058
J21520007-001: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-306-3074
Nonmetallic Bumper

123063074
DIN95364-A15X15-NR55ST: RNCC: 2 | RNVC: 2
1.15.15.4.55NR/ST: RNCC: 5 | RNVC: 2
811.030.015.015.04X13.NR55.ST: RNCC: 5 | RNVC: 2
81130-15X15-M4X13.NR55.ST: RNCC: 5 | RNVC: 2
0716110104: RNCC: 5 | RNVC: 2
VG95364-A15X15-NR55ST: RNCC: 5 | RNVC: 9

18 Feb 1986

5340-12-311-1565
Snap Hook

123111565
226 S-100X10: RNCC: 3 | RNVC: 9

31 Jul 1987

5340-12-307-6769
Resilient Mount

123076769
DIN95363-A40X30-CR70ST: RNCC: 2 | RNVC: 2
1.40.30.1.70CR/ST: RNCC: 5 | RNVC: 2
811.000.040.030.08X20.CR70.ST: RNCC: 5 | RNVC: 2
81100-40X30-M8X20.CR70.ST: RNCC: 5 | RNVC: 2
81100-40X30-M8X20.CR70.STZN: RNCC: 5 | RNVC: 2
VG95363-A40X30-CR70ST: RNCC: 5 | RNVC: 9
VG95363-A40X30-CR70STZN: RNCC: 5 | RNVC: 9

16 Jul 1986

5340-12-383-3624
Lock-Release Lever

123833624
38012-2300.00/M: RNCC: 2 | RNVC: 2
38012-2300.00/M: RNCC: 5 | RNVC: 2

12 Oct 2010

5340-12-357-4630
Section Block Clamp

123574630
2500266-194250.001.0: RNCC: 2 | RNVC: 2
2500266-194250.001.0: RNCC: 3 | RNVC: 2

24 Jun 2002

5340-12-322-4082
Nonmetallic Bumper

123224082
702-244110-906-0: RNCC: 3 | RNVC: 2

20 Aug 1990

5340-12-345-9060
Mounting Plate

123459060
KB-69390-760: RNCC: 3 | RNVC: 2
69390-760: RNCC: 5 | RNVC: 2

14 May 1998

5340-12-198-0450
Angle Bracket

121980450
C42080-A6-C65: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-192-3883
Nonmetallic Bumper

121923883
65.7091.680.02-A002: RNCC: 3 | RNVC: 2
65-7091-680-02A002: RNCC: 5 | RNVC: 2
235136: RNCC: 5 | RNVC: 2

20 Apr 1982

5340-12-303-3607
Friction Catch Stud

123033607
701-111200-906-0: RNCC: 3 | RNVC: 2

18 Mar 1985

5340-12-198-0442
Mending Plate

121980442
C42080-A6-C108: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-357-6890
Mounting Plate

123576890
SNC-32: RNCC: 3 | RNVC: 2
174383: RNCC: 5 | RNVC: 2
8028084S00: RNCC: 5 | RNVC: 2
SNC-32: RNCC: 5 | RNVC: 2

12 Jul 2002

5340-12-311-2730
Mending Plate

123112730
1887989: RNCC: 3 | RNVC: 2
5303.016.00.20/004: RNCC: 5 | RNVC: 2
5303.016.00.20.004: RNCC: 5 | RNVC: 2

11 Aug 1987

5340-12-339-6852
Turnbuckle Body

123396852
480-1551-06-00-01: RNCC: 3 | RNVC: 2
480 1551 06 00 01: RNCC: 5 | RNVC: 2
480-151-06-00-01: RNCC: 5 | RNVC: 9

21 Dec 1995

5340-12-378-2285
Loop Clamp

123782285
5559247: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-12-378-3244
Mounting Bracket

123783244
200 010 970 300: RNCC: 3 | RNVC: 2

27 Mar 2009

5340-12-004-3997

5340-12-354-2316
Mounting Bracket

123542316
0745800: RNCC: 3 | RNVC: 2

21 Jun 2001

5340-12-351-5408
Mounting Plate

123515408
7802781845: RNCC: 2 | RNVC: 2
7802781845: RNCC: 5 | RNVC: 2
78027 81845: RNCC: 5 | RNVC: 9

2 Aug 2000

5340-12-353-8156
Multiple Eye Pad

123538156
16001492: RNCC: 3 | RNVC: 2

11 May 2001

5340-12-360-7088
Multiple Eye Pad

123607088
000611-231000.04: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-374-2528
Mounting Plate

123742528
L521M1059212: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-373-8215
Rod End Clevis

123738215
L671M3012101: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-12-322-2694
Plain Solid Disk

123222694
1715354: RNCC: 3 | RNVC: 2
1715354: RNCC: 5 | RNVC: 2

7 Aug 1990

5340-12-168-2806
Loop Clamp

121682806
LN9491BM25: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-371-6569
Manual Control Handle

123716569
2138692: RNCC: 3 | RNVC: 2
7KK308: RNCC: 5 | RNVC: 2

3 May 2007

5340-12-351-6526
Helical Compression Spring Retainer

123516526
218517-7094: RNCC: 3 | RNVC: 2

11 Aug 2000

5340-12-197-3185
Nonmetallic Bumper

121973185
4259875140: RNCC: 3 | RNVC: 2

12 Oct 1983

5340-12-348-0195
Dust And Moisture Seal Protective Cap

123480195
4033.3140.00: RNCC: 3 | RNVC: 2
40333140: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-12-026-6530

5340-12-392-7651
Turnbuckle

123927651
120D153227.000.0: RNCC: 2 | RNVC: 2
120D153227.000.0: RNCC: 3 | RNVC: 2

5 Jul 2013

5340-12-391-4654
Screw Hook

123914654
4100095-982108.000.0: RNCC: 2 | RNVC: 2
4100095-982108.000.0: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-301-7807
Retaining Strap

123017807
4-145060: RNCC: 3 | RNVC: 2

9 Nov 1984

5340-12-317-0687
Mounting Bracket

123170687
4602410602: RNCC: 3 | RNVC: 2
7211311741: RNCC: 3 | RNVC: 9

9 Mar 1989

5340-12-343-5513
Mounting Plate

123435513
05760000001400: RNCC: 3 | RNVC: 2
F300 0T 022 3787: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-12-317-0515
Manual Control Lever

123170515
3224200312: RNCC: 3 | RNVC: 2

7 Mar 1989

5340-12-351-5001
Dust And Moisture Seal Protective Cap

123515001
6029970020: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-181-2636
Angle Bracket

121812636
3140661940: RNCC: 3 | RNVC: 2

7 Nov 1979

5340-12-336-9179
Spacing Threaded Standoff

123369179
2106-211000A22B: RNCC: 2 | RNVC: 2
7801152141: RNCC: 3 | RNVC: 2
2106-211000A22B: RNCC: 5 | RNVC: 2
78011 52141: RNCC: 5 | RNVC: 9

28 Dec 1994

5340-12-338-6883
Turnbuckle

123386883
5700016V: RNCC: 3 | RNVC: 2

16 Aug 1995

5340-12-040-1565

5340-12-339-6482
Multiple Angle Bracket

123396482
81431405007: RNCC: 3 | RNVC: 2
81.43140.5007: RNCC: 5 | RNVC: 2

18 Dec 1995

5340-12-310-9386
Access Cover

123109386
2300227-321800.001: RNCC: 2 | RNVC: 2
2300227-321800.001: RNCC: 3 | RNVC: 2
2300227-321800.001: RNCC: 5 | RNVC: 9

10 Jul 1987

5340-12-310-3123
Retaining Strap

123103123
DSCM002: RNCC: 3 | RNVC: 2
DS CM 002: RNCC: 5 | RNVC: 2

8 May 1987

5340-12-310-9522
Access Cover

123109522
78203 53300: RNCC: 2 | RNVC: 2
7820353300: RNCC: 3 | RNVC: 2
78203 53300: RNCC: 5 | RNVC: 9

13 Jul 1987

5340-12-314-3884
Mending Plate

123143884
024082901: RNCC: 3 | RNVC: 2

1 Jul 1988

5340-12-197-0515
Nonmetallic Bumper

121970515
4358217071: RNCC: 3 | RNVC: 2
4358217071: RNCC: 3 | RNVC: 9

14 Sep 1983

5340-12-393-2538
Webbing Strap

123932538
2597-71000: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-12-338-6652
Friction Catch Stud

123386652
E16143 3502: RNCC: 3 | RNVC: 2
16143-3502: RNCC: 5 | RNVC: 2

11 Aug 1995

5340-12-381-5530
Door Handle

123815530
SZ2533.000: RNCC: 3 | RNVC: 2

3 Mar 2010

5340-12-332-1312
Spring Tension Clip

123321312
1H0853585: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-361-3975
Door Button

123613975
62710067: RNCC: 3 | RNVC: 2

23 Sep 2003

5340-12-143-2964
Webbing Strap

121432964
RELGH394T83: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-343-7349
Mounting Bracket

123437349
6064.3250.02: RNCC: 3 | RNVC: 2

18 Jul 1997

5340-12-329-8697
Pad Eye

123298697
VG95211-ML-123298697: RNCC: 2 | RNVC: 2
65209-09033Y102: RNCC: 3 | RNVC: 2
65209-09033Y102: RNCC: 5 | RNVC: 2

8 Oct 1992

5340-12-305-2085
Angle Bracket

123052085
23114-4321.26: RNCC: 2 | RNVC: 2
23114-4321.26: RNCC: 3 | RNVC: 2
23114-4321.26: RNCC: 5 | RNVC: 9
9862346: RNCC: 5 | RNVC: 9

8 Oct 1985

5340-12-311-0655
Mending Plate

123110655
100227-96400: RNCC: 3 | RNVC: 2
100227-96400: RNCC: 5 | RNVC: 9

22 Jul 1987

5340-12-344-0355
Nonmetallic Solid Wheel

123440355
9.14878: RNCC: 3 | RNVC: 2
7307336: RNCC: 5 | RNVC: 2
914878: RNCC: 5 | RNVC: 2

2 Sep 1997

5340-12-377-0566
Angle Bracket

123770566
2300232-030070.000.0: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-12-364-3502
Nonmetallic Bumper

123643502
DIN95364-A25X20-NR70ST: RNCC: 2 | RNVC: 2

14 Sep 2004

5340-12-324-0048
Dust And Moisture Seal Protective Cap

123240048
5077 321 008: RNCC: 3 | RNVC: 2
5077321008: RNCC: 5 | RNVC: 2
3.3506-0032.1: RNCC: 5 | RNVC: 9

15 Jan 1991

5340-12-132-1483
Door Button

121321483
DIN7463-A1-8BK: RNCC: 2 | RNVC: 2
6020202: RNCC: 3 | RNVC: 2
A1-8DIN7463ROH: RNCC: 5 | RNVC: 2
803133: RNCC: 5 | RNVC: 2
A8DIN7463R0H: RNCC: 5 | RNVC: 2
50202: RNCC: 5 | RNVC: 2
6020132: RNCC: 5 | RNVC: 2
0051.1074.6: RNCC: 5 | RNVC: 2
A1-8DIN7463GTW-35: RNCC: 5 | RNVC: 2
A1-8DIN7463R0H: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-329-6024
Nonmetallic Bumper

123296024
A-616832-011: RNCC: 3 | RNVC: 2
A616832-011: RNCC: 5 | RNVC: 2

8 Sep 1992

5340-12-320-2199
Resilient Mount

123202199
HB44-CBM-15-E: RNCC: 3 | RNVC: 2
HB44-CBM-15-E: RNCC: 5 | RNVC: 9

19 Dec 1989

5340-12-137-1051
Butt Hinge

121371051
DIN7954-B70-MS-BK: RNCC: 2 | RNVC: 2
B70DIN7954MS: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-190-7228
Angle Bracket

121907228
NO PRIMARY REF 12-190-7228: RNCC: 3 | RNVC: 2
7502 137278: RNCC: 5 | RNVC: 9
7502137278: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-360-7776
Mounting Plate

123607776
5446S/03-028: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-176-3212
Loop Clamp

121763212
PAN4264-15: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-155-3505
Rod End Clevis

121553505
160-41210-06: RNCC: 3 | RNVC: 2
160-41210-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-385-6800
Mounting Plate

123856800
210679: RNCC: 3 | RNVC: 2
93525-000.26: RNCC: 5 | RNVC: 2

29 Jun 2011

5340-12-375-7588
Block Clamp

123757588
DIN3015-L-KP-3-22-PA: RNCC: 2 | RNVC: 2
RAN322X: RNCC: 3 | RNVC: 2
A210607000009: RNCC: 5 | RNVC: 2

2 Jul 2008

5340-12-320-7470
Dust And Moisture Seal Protective Plug

123207470
7485.0: RNCC: 3 | RNVC: 2
86233: RNCC: 5 | RNVC: 2

13 Feb 1990

5340-12-322-7959
Nonmetallic Bumper

123227959
20-5140-007: RNCC: 3 | RNVC: 2

21 Sep 1990

5340-12-158-2859
Pipe Bracket

121582859
512201-0253.000: RNCC: 3 | RNVC: 2
512201-0253: RNCC: 5 | RNVC: 2
6736-12000-45: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-311-3488
Bridge Clamp

123113488
14139-500: RNCC: 3 | RNVC: 2
KB-14139-500: RNCC: 5 | RNVC: 2
5920050517: RNCC: 5 | RNVC: 2

21 Aug 1987

5340-12-367-9526
Lock-Release Lever

123679526
05120-10: RNCC: 3 | RNVC: 2
NLM 05120-10: RNCC: 5 | RNVC: 2

10 Nov 2005

5340-12-311-4412
Snap Hook

123114412
DIN5299-E60ZN: RNCC: 2 | RNVC: 2
DIN5299-E60ZN: RNCC: 3 | RNVC: 2
226-60X6 VERZINKT: RNCC: 3 | RNVC: 9
E60DIN5299VERZINKT: RNCC: 5 | RNVC: 2

2 Sep 1987

5340-12-366-8761
Access Cover

123668761
2300436-018100.000.0: RNCC: 1 | RNVC: 2
2300436-018100.000.0: RNCC: 3 | RNVC: 2
2300436-018100.000.0: RNCC: 3 | RNVC: 2
2300436018: RNCC: 5 | RNVC: 2

18 Jun 2005

5340-12-318-8256
Strap Hinge

123188256
1715: RNCC: 3 | RNVC: 2
1715-6: RNCC: 5 | RNVC: 2

18 Aug 1989

5340-12-148-9299
Nonmetallic Bumper

121489299
23176-262120.08.0: RNCC: 2 | RNVC: 2
23176-262120.08.0: RNCC: 3 | RNVC: 2
23176-262120-08-0: RNCC: 5 | RNVC: 2
837-23176-262120.08.0.NBR60: RNCC: 5 | RNVC: 2
23176-262120-08-0: RNCC: 5 | RNVC: 9
23176-262120.08.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-358-3158
Mending Plate

123583158
2500262-192100.003.0: RNCC: 2 | RNVC: 2
2500262-192100.003.0: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-12-332-4187
Mounting Bracket

123324187
480-7345-08-00-24: RNCC: 3 | RNVC: 2
480/7345-08-00-24: RNCC: 5 | RNVC: 2

10 Aug 1993

5340-12-306-2436
Angle Bracket

123062436
47433-001: RNCC: 3 | RNVC: 2
47 433-001: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-12-374-1499
Mounting Bracket

123741499
4.042-317.0: RNCC: 3 | RNVC: 2
4.042-317: RNCC: 5 | RNVC: 9

23 Jan 2008

5340-12-702-9381
Dust And Moisture Seal Protective Cap

127029381
VG95211-ML-127029381: RNCC: 2 | RNVC: 2
7-2 OST1 10476-72: RNCC: 3 | RNVC: 2
0500862595499: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-314-9002
Double Angle Bracket

123149002
A-145301-003: RNCC: 3 | RNVC: 2
A145301-003: RNCC: 5 | RNVC: 2

24 Aug 1988

Load More Results