What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 38 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 38 of 178

5340-12-371-4474
Nonmetallic Bumper

123714474
22727: RNCC: 3 | RNVC: 2

30 Mar 2007

5340-12-332-3111
Access Cover

123323111
8605 002 114: RNCC: 3 | RNVC: 2
8605002114: RNCC: 5 | RNVC: 9

27 Jul 1993

5340-12-355-4252
Webbing Strap

123554252
4617901479: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-12-341-8551
Catch Strike

123418551
105-20001.31: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-12-301-1637
Mending Plate

123011637
A-243863-003: RNCC: 3 | RNVC: 2
A243863-003: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-375-8068
Retaining Strap

123758068
056619: RNCC: 3 | RNVC: 2

7 Jul 2008

5340-12-371-8381
Pad Eye

123718381
062069: RNCC: 3 | RNVC: 2
062069C: RNCC: 5 | RNVC: 2

22 May 2007

5340-12-391-4854
Angle Bracket

123914854
I006039TAN686A: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-375-2677
Access Cover

123752677
04905134: RNCC: 3 | RNVC: 2
7420921821: RNCC: 5 | RNVC: 2

13 May 2008

5340-12-371-9576
Webbing Strap

123719576
D010517: RNCC: 3 | RNVC: 2
55880512: RNCC: 5 | RNVC: 2
7995877: RNCC: 5 | RNVC: 2

4 Jun 2007

5340-12-393-0106
Retaining Strap

123930106
0023420000: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-363-0527
Mounting Bracket

123630527
925906977: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-199-2768
Retaining Strap

121992768
114M40004: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-12-317-2016
Strapping

123172016
102: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-360-9329
Manual Control Handle

123609329
12359501: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-320-1187
Kunst Gleitschiene

123201187
0957101: RNCC: 3 | RNVC: 2

8 Dec 1989

5340-12-384-2174
Manual Control Handle

123842174
869105007: RNCC: 2 | RNVC: 2
869105007: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-12-306-6288
Friction Catch Stud Receptacle

123066288
SN026183: RNCC: 3 | RNVC: 2
84064: RNCC: 5 | RNVC: 2

17 Mar 1986

5340-12-180-4690
Retaining Strap

121804690
3816250114: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-165-4421
Dust And Moisture Seal Protective Cap-Plug

121654421
610U9: RNCC: 3 | RNVC: 2
1141: RNCC: 5 | RNVC: 2
GPN610U9: RNCC: 5 | RNVC: 2
909734157: RNCC: 5 | RNVC: 2
610U9: RNCC: 5 | RNVC: 2
GPN610U9: RNCC: 5 | RNVC: 2
610000900: RNCC: 5 | RNVC: 9
GPN610,U9: RNCC: 5 | RNVC: 9
U9: RNCC: 5 | RNVC: 9
U9GPN610: RNCC: 5 | RNVC: 9

4 May 1976

5340-12-348-1059
Mounting Plate

123481059
58R059-84412: RNCC: 2 | RNVC: 2
58R059-84412: RNCC: 3 | RNVC: 2

15 Apr 1999

5340-12-308-2841
Butt Hinge Leaf

123082841
W032 6000 07 000: RNCC: 3 | RNVC: 2
0 6000 07 0 32: RNCC: 5 | RNVC: 2
032 6000 07 000: RNCC: 5 | RNVC: 2
9322414: RNCC: 5 | RNVC: 2

23 Sep 1986

5340-12-131-5633

5340-12-125-2029

5340-12-131-5601

5340-12-351-9854
Mending Plate

123519854
5619602: RNCC: 3 | RNVC: 2

25 Sep 2000

5340-12-387-6500
Mounting Bracket

123876500
40032932: RNCC: 2 | RNVC: 2
40032932: RNCC: 3 | RNVC: 2
60124097: RNCC: 5 | RNVC: 2

19 Jan 2012

5340-12-302-9505
Bow Handle

123029505
068130173A: RNCC: 3 | RNVC: 2

12 Feb 1985

5340-12-024-2614

5340-12-165-8964
Loop Clamp

121658964
2124173: RNCC: 3 | RNVC: 2
62640004: RNCC: 5 | RNVC: 2
2124-17-3: RNCC: 5 | RNVC: 2
3080: RNCC: 5 | RNVC: 2
60889: RNCC: 5 | RNVC: 2
504-803: RNCC: 5 | RNVC: 2
2124-17-3: RNCC: 5 | RNVC: 2
60889: RNCC: 5 | RNVC: 9

13 Jul 1976

5340-12-305-0540
Angle Bracket

123050540
A-231234-001: RNCC: 3 | RNVC: 2
A231234-001: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-307-6311
Mending Plate

123076311
P-244640-752: RNCC: 3 | RNVC: 2
P244640-752: RNCC: 5 | RNVC: 2

10 Jul 1986

5340-12-304-1206
Mending Plate

123041206
4900277-0.03: RNCC: 2 | RNVC: 2
4900277-0.03: RNCC: 3 | RNVC: 2
4900277-0.03: RNCC: 5 | RNVC: 9

12 Jun 1985

5340-12-146-2359
Pipe Bracket

121462359
23114-5033.00: RNCC: 2 | RNVC: 2
23114-5033-00: RNCC: 3 | RNVC: 2
23114-5033-00: RNCC: 5 | RNVC: 9
23114-5033-00: RNCC: 5 | RNVC: 9
23114-5033-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-162-6259
Mending Plate

121626259
8475418: RNCC: 3 | RNVC: 2
8082885: RNCC: 5 | RNVC: 2
8082-885: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-363-9996
Verriegelun Buegel

123639996
0202-001-412: RNCC: 3 | RNVC: 2

11 Aug 2004

5340-12-361-2562
Access Cover

123612562
51981120243: RNCC: 3 | RNVC: 2
51.98112-0243: RNCC: 5 | RNVC: 2

10 Sep 2003

5340-12-127-0955
Dust And Moisture Seal Protective Cap

121270955
41-4041-1031-00: RNCC: 3 | RNVC: 2
414041103100: RNCC: 5 | RNVC: 2
4049870641: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-314-2047
Mounting Bracket

123142047
272.1765.21-05: RNCC: 2 | RNVC: 2
272.1765.21-05: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-12-188-9605
Access Cover

121889605
5801433-040000.21.0: RNCC: 3 | RNVC: 2
5801433-040000-21-0: RNCC: 5 | RNVC: 2
5801433-040000-21-0: RNCC: 5 | RNVC: 9
5801433-040000.21.0: RNCC: 5 | RNVC: 9

12 Aug 1981

5340-12-198-8551
Catch Strike

121988551
VG95136B1-50X30-TEIL 1: RNCC: 2 | RNVC: 2
VG95136B1-50X30-TEIL 1: RNCC: 3 | RNVC: 2
602K0152-001-00.4: RNCC: 3 | RNVC: 2
602K0152-1: RNCC: 5 | RNVC: 2
VG95136B1-50X30-TEIL 1: RNCC: 5 | RNVC: 9

3 Mar 1984

5340-12-139-9843
Loop Clamp

121399843
DIN3016-G1-135X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-135X20-W1-2: RNCC: 3 | RNVC: 2
SP135/20SKZ: RNCC: 3 | RNVC: 2
37602: RNCC: 5 | RNVC: 2
SP135-20X1-25SKZN288A: RNCC: 5 | RNVC: 2
1510000135: RNCC: 5 | RNVC: 2
SP135-20SKZ: RNCC: 5 | RNVC: 2
VG95931G135X20W1: RNCC: 5 | RNVC: 9
VG95931-G135X20-W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-137-5150
Expansion Shield

121375150
N9/50: RNCC: 3 | RNVC: 2
N9-50: RNCC: 5 | RNVC: 2
012: RNCC: 5 | RNVC: 2
N8X50: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-4624
Mending Plate

123174624
3787215EE3132-99: RNCC: 3 | RNVC: 2
151-250000-902-0: RNCC: 5 | RNVC: 2
151-250000-902-0: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-12-381-5586
Halter

123815586
4100036-151521.000.0: RNCC: 2 | RNVC: 2
4100036-151521.000.0: RNCC: 3 | RNVC: 2

4 Mar 2010

5340-12-330-1557
Lock-Release Lever

123301557
2500082-190500.07.0: RNCC: 2 | RNVC: 2
2500082-190500.07.0: RNCC: 3 | RNVC: 2

10 Nov 1992

5340-12-321-6018
Mounting Bracket

123216018
58R062-3-14: RNCC: 2 | RNVC: 2
58R062-3-14: RNCC: 3 | RNVC: 2

6 Jun 1990

5340-12-130-4659

5340-12-131-6269

5340-12-343-5661
Mounting Bracket

123435661
56030301001: RNCC: 3 | RNVC: 2
F300 0T 022 5276: RNCC: 6 | RNVC: 9

3 Jul 1997

5340-12-180-2737
Webbing Strap

121802737
3818600252: RNCC: 3 | RNVC: 2

31 Aug 1979

5340-12-131-5582

5340-12-371-2814
Angle Bracket

123712814
S535M1156213: RNCC: 2 | RNVC: 2
S535M1156213: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-12-362-8954
Double Angle Bracket

123628954
4254263340: RNCC: 3 | RNVC: 2

9 Apr 2004

5340-12-372-0078
Spring Loaded Cylinder Fastener

123720078
923014: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-12-371-9878
Access Cover

123719878
5802017-718561.00: RNCC: 2 | RNVC: 2
5802017-718561.00: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-12-320-8121
Retaining Clip

123208121
781 9001 600 01: RNCC: 3 | RNVC: 2

19 Feb 1990

5340-12-374-1595
Sealing Plug Assembly

123741595
AH30352P01: RNCC: 3 | RNVC: 2

24 Jan 2008

5340-12-179-5096
Dust And Moisture Seal Protective Cap

121795096
3520180106: RNCC: 3 | RNVC: 2

4 Jul 1979

5340-12-348-6698
Mechanical Stop

123486698
10139301: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-364-2477
Mounting Bracket

123642477
4256801814: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-163-7410
Loop Clamp

121637410
LN9491BM7: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-169-6912
Rod End Connector

121696912
JJ45766: RNCC: 3 | RNVC: 2

3 Jun 1977

5340-12-165-7173
Turnbuckle

121657173
87.12.00000.0030.0: RNCC: 3 | RNVC: 2
3-22232: RNCC: 3 | RNVC: 2
3-22232: RNCC: 5 | RNVC: 9

22 Jun 1976

5340-12-325-0798
Angle Bracket

123250798
702-731171-902-0: RNCC: 3 | RNVC: 2

30 Apr 1991

5340-12-361-7722
Dust And Moisture Seal Protective Cap

123617722
90-3: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-12-367-4355
Manual Control Lever

123674355
E900-3.1: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-12-327-2142
Mounting Plate

123272142
M514286: RNCC: 3 | RNVC: 9
M514286: RNCC: 5 | RNVC: 2

17 Dec 1991

5340-12-387-6937
Access Cover

123876937
862321006: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-12-190-4227
Rod End Clevis

121904227
1422319001: RNCC: 3 | RNVC: 2

25 Nov 1981

5340-12-044-1185

5340-12-199-4096
Retaining Strap

121994096
52.9794.002.06: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-305-5979
Access Cover

123055979
4068365011: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-320-6586
Nonmetallic Bumper

123206586
34211457572: RNCC: 3 | RNVC: 2
1457572: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-325-7180
Angle Bracket

123257180
3660720740: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-12-358-8030
Webbing Strap

123588030
4357927198: RNCC: 3 | RNVC: 2

18 Nov 2002

5340-12-320-1485
Bow Handle

123201485
4608100154: RNCC: 3 | RNVC: 2
7211831562: RNCC: 3 | RNVC: 9
731.06.148: RNCC: 5 | RNVC: 2
V731.06.148: RNCC: 5 | RNVC: 2

13 Dec 1989

5340-12-306-9236
Rod End Clevis

123069236
6115985: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-12-152-9757
Coat And Hat Hook

121529757
6210049: RNCC: 3 | RNVC: 2
6210028: RNCC: 5 | RNVC: 2
2121180: RNCC: 5 | RNVC: 2
01230174: RNCC: 5 | RNVC: 2
1230174EE8935-16: RNCC: 5 | RNVC: 2
621K0005: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-3729
Lock-Release Lever

121963729
2047: RNCC: 3 | RNVC: 2

30 Jun 1983

5340-12-314-5211
Access Cover

123145211
272.307 376: RNCC: 2 | RNVC: 2
272.307.376: RNCC: 3 | RNVC: 2
272.307 376: RNCC: 5 | RNVC: 9

15 Jul 1988

5340-12-331-2031
Access Cover

123312031
7068-34000-000-2: RNCC: 3 | RNVC: 2

1 Apr 1993

5340-12-318-7312
Angle Bracket

123187312
704-122000-930-0: RNCC: 3 | RNVC: 2

11 Aug 1989

5340-12-306-0918
Metal Runner

123060918
5801984-100000.018.0: RNCC: 2 | RNVC: 2
5801984-100000.018.0: RNCC: 3 | RNVC: 2

27 Jan 1986

5340-12-190-7363
Retaining Strap

121907363
V22.498.7-02: RNCC: 3 | RNVC: 2
V22-498-7-02: RNCC: 5 | RNVC: 9

10 Dec 1981

5340-12-198-8417
Double Angle Bracket

121988417
4900123-1300.07: RNCC: 2 | RNVC: 2
2-02.021: RNCC: 3 | RNVC: 2
4900123-1300.07: RNCC: 3 | RNVC: 2
4900123-1300.07: RNCC: 3 | RNVC: 2
6556364: RNCC: 5 | RNVC: 2
4900123-1300.07: RNCC: 5 | RNVC: 9
4900123-1300.07: RNCC: 5 | RNVC: 9

3 Mar 1984

5340-12-356-2407
Door Button

123562407
2339-070030A05B: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-314-9429
Clamping Catch

123149429
136-041.09: RNCC: 3 | RNVC: 2
136E041.09: RNCC: 5 | RNVC: 2

31 Aug 1988

5340-12-362-2718
Mounting Bracket

123622718
J92228012-404: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-703-3066
Mending Plate

127033066
VG95211-ML-127033066: RNCC: 2 | RNVC: 2
5.12.2210.1602.01: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-199-4913
Retaining Strap

121994913
23223-060000.08.0: RNCC: 2 | RNVC: 2
23223-060000.08.0: RNCC: 3 | RNVC: 2
23223-060000.08.0: RNCC: 5 | RNVC: 9

1 May 1984

5340-12-376-5745
Section Block Clamp

123765745
598101-189819.000.0: RNCC: 2 | RNVC: 2
598101-189819.000.0: RNCC: 5 | RNVC: 2

17 Oct 2008

5340-12-320-6064
Spring Tension Clip

123206064
NO PRIMARY REF 12-320-6064: RNCC: 3 | RNVC: 2
6.0354: RNCC: 5 | RNVC: 2
13220: RNCC: 5 | RNVC: 9

30 Jan 1990

5340-12-702-5792
Mounting Plate

127025792
VG95211-ML-127025792: RNCC: 2 | RNVC: 2
5.51.7805.0000.29: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-4167
Mounting Plate

127024167
VG95211-ML-127024167: RNCC: 2 | RNVC: 2
5.12.7003.1170.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-185-1404
Mending Plate

121851404
NO PRIMARY REF 12-185-1404: RNCC: 3 | RNVC: 2
1-6899-15-3-7404: RNCC: 5 | RNVC: 9
15-1-6988-4: RNCC: 5 | RNVC: 9

13 Sep 1980

5340-12-320-2820
Mending Plate

123202820
53252-001: RNCC: 3 | RNVC: 2
53 252-001: RNCC: 5 | RNVC: 9

28 Dec 1989

5340-12-340-4753
Access Cover

123404753
5.063-226: RNCC: 2 | RNVC: 2
5.063-226.0: RNCC: 3 | RNVC: 2
5.063-226: RNCC: 5 | RNVC: 9

19 Apr 1996

5340-12-152-8212
Loop Clamp

121528212
DIN3016-1-A2-32-48X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A2-32-48X15-W1-2: RNCC: 3 | RNVC: 2
RS1.32-48/15: RNCC: 3 | RNVC: 2
RS1100.32-48/15: RNCC: 5 | RNVC: 2
23307-208000-67-0: RNCC: 5 | RNVC: 2
23307-208000.67.0: RNCC: 5 | RNVC: 9
DIN3016-A2-32-48X15-W1-2: RNCC: 5 | RNVC: 9
23307-208000-67-0: RNCC: 5 | RNVC: 9
4217015032: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-7567
Loop Clamp

123597567
DIN3016-1-D1-10X9-W5-2-CR: RNCC: 2 | RNVC: 2
RSGU1.10/9-W5: RNCC: 3 | RNVC: 2
DIN3016-D1-10X9-W5-2-CR: RNCC: 5 | RNVC: 9

7 Mar 2003

5340-12-322-5728
Mounting Plate

123225728
2500067-102921.00: RNCC: 2 | RNVC: 2
2500067-102921.00: RNCC: 3 | RNVC: 2

3 Sep 1990

5340-12-349-6469
Double Angle Bracket

123496469
U60.224000.01-00: RNCC: 3 | RNVC: 2

14 Dec 1999

5340-12-368-7635
Spring Tension Clip

123687635
3005020033: RNCC: 3 | RNVC: 2
805-10-00-19-01: RNCC: 5 | RNVC: 9

13 Apr 2006

5340-12-302-2610
Angle Bracket

123022610
43711552-301: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-191-2532
Bow Handle

121912532
2500058-110400.01: RNCC: 2 | RNVC: 2
2500058-110400.01: RNCC: 3 | RNVC: 2
2500058-110400.01: RNCC: 3 | RNVC: 2
2500058-110400.01: RNCC: 5 | RNVC: 2
2500058-110400.01: RNCC: 5 | RNVC: 9
2500058-110400.01: RNCC: 5 | RNVC: 9
2500058-110400-01: RNCC: 5 | RNVC: 9

20 Jan 1982

5340-12-171-4676
Resilient Mount

121714676
2K2-AAM-75: RNCC: 3 | RNVC: 2
0005330954: RNCC: 5 | RNVC: 2
2K2-AAM-75: RNCC: 5 | RNVC: 9
2K2AAM75: RNCC: 5 | RNVC: 9

13 Oct 1977

5340-12-315-5301
Butt Hinge Leaf

123155301
5803471-201320.01: RNCC: 2 | RNVC: 2
65.7789.424.01-A001: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-12-315-6657
Angle Bracket

123156657
510252-3095.000: RNCC: 3 | RNVC: 2
510252-3095: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-151-8058
Double Angle Bracket

121518058
BD7001T921: RNCC: 3 | RNVC: 2
BD7001T921: RNCC: 3 | RNVC: 9
1292001-000910.921: RNCC: 5 | RNVC: 9
1292001-000910-921: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-8050
Handwheel

121648050
7360 040 110: RNCC: 3 | RNVC: 2
7392-461: RNCC: 5 | RNVC: 2
7392461: RNCC: 5 | RNVC: 2
7360040110: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-338-0756
Electronic Equipment Hardware Kit

123380756
21100-109: RNCC: 3 | RNVC: 2

18 May 1995

5340-12-384-5233
Mounting Bracket

123845233
F1.1289-37-05-00.00-04: RNCC: 3 | RNVC: 2

2 Mar 2011

5340-12-356-7048
Retaining Strap

123567048
33036-003-046: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-360-4697
Loop Clamp

123604697
04218186000: RNCC: 3 | RNVC: 2
RSGU1.54-25/25-W1: RNCC: 5 | RNVC: 9

23 May 2003

5340-12-198-0227
Support Hook

121980227
P-896336-401: RNCC: 3 | RNVC: 2
P896336-401: RNCC: 5 | RNVC: 2

13 Dec 1983

5340-12-390-4006
Access Cover

123904006
2300559-188652.000.0: RNCC: 2 | RNVC: 2
2300559-188652.000.0: RNCC: 3 | RNVC: 2

8 Nov 2012

5340-12-303-3071
Catch Strike

123033071
P-875564-001: RNCC: 3 | RNVC: 2
P875564-001: RNCC: 5 | RNVC: 2

13 Mar 1985

5340-12-302-0247
Double Angle Bracket

123020247
P-855977-405: RNCC: 3 | RNVC: 2
P855977-405: RNCC: 5 | RNVC: 2

28 Nov 1984

5340-12-311-7384
Spring Tension Clip

123117384
1000042-195300.09: RNCC: 3 | RNVC: 2

13 Oct 1987

5340-12-332-7582
Helical Compression Spring Seat

123327582
4726.45: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-12-318-9028
Dust And Moisture Seal Protective Cap

123189028
409193: RNCC: 3 | RNVC: 2
409193: RNCC: 5 | RNVC: 2
409193: RNCC: 5 | RNVC: 9

24 Aug 1989

5340-12-349-7024
Mounting Bracket

123497024
2500271-71107.00: RNCC: 2 | RNVC: 2
185032: RNCC: 3 | RNVC: 2
2500271-71107.00: RNCC: 5 | RNVC: 9
F00185364: RNCC: 5 | RNVC: 9
2500271-71107.00: RNCC: 5 | RNVC: 9
F00185364: RNCC: 5 | RNVC: 9

27 Dec 1999

5340-12-192-3177
Retaining Strap

121923177
42010338: RNCC: 3 | RNVC: 2
42010338EE5006-75: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-391-4290
Access Cover

123914290
I006997TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-372-2864
Belt-Strap Keeper

123722864
03345: RNCC: 3 | RNVC: 2

4 Jul 2007

5340-12-364-3405
Mounting Bracket

123643405
4256870011: RNCC: 3 | RNVC: 2

11 Sep 2004

5340-12-377-2605
Angle Bracket

123772605
504033965: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-12-180-0565
Butt Hinge Leaf

121800565
9395: RNCC: 3 | RNVC: 2
3826300182: RNCC: 5 | RNVC: 2

17 Aug 1979

5340-12-393-5041
Access Cover

123935041
200162321: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-360-0775
Access Cover

123600775
9418400125: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-12-391-5882
Access Cover

123915882
I001658TAN686A: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-12-090-5064

5340-12-350-5925
Mechanical Stop

123505925
54.1038.035.30: RNCC: 2 | RNVC: 2
54.1038.035.30: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-313-1927
Access Cover

123131927
1067207: RNCC: 2 | RNVC: 2
1067207: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-12-318-5843
Nonmetallic Bumper

123185843
4357437641: RNCC: 3 | RNVC: 2
4357437641: RNCC: 3 | RNVC: 9

31 Jul 1989

5340-12-181-2920
Mounting Bracket

121812920
443957818C: RNCC: 3 | RNVC: 2
049133687: RNCC: 5 | RNVC: 9
191957787: RNCC: 5 | RNVC: 9

12 Nov 1979

5340-12-311-8849
Dust And Moisture Seal Protective Cap

123118849
ZG8106T089: RNCC: 3 | RNVC: 2
ZG8106T089: RNCC: 5 | RNVC: 9

27 Oct 1987

5340-12-327-1479
Mechanic Equipment Hardware Kit

123271479
4900323: RNCC: 3 | RNVC: 2

6 Dec 1991

5340-12-175-1270
Bow Handle

121751270
4258150136: RNCC: 3 | RNVC: 2
A4258150136: RNCC: 5 | RNVC: 2

28 Aug 1978

5340-12-359-1508
Mounting Bracket

123591508
ZG5200G188: RNCC: 3 | RNVC: 2
ZG5200G188: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-387-3732
Dust And Moisture Seal Protective Cover

123873732
10087883-BUND: RNCC: 3 | RNVC: 2

6 Dec 2011

5340-12-191-9518
Rigid Caster

121919518
211843423A: RNCC: 3 | RNVC: 2

16 Mar 1982

5340-12-387-6566
Pad Eye

123876566
T521M0501105: RNCC: 3 | RNVC: 2

20 Jan 2012

5340-12-332-5912
Support Hook

123325912
026250: RNCC: 3 | RNVC: 2
26250: RNCC: 5 | RNVC: 2

25 Aug 1993

5340-12-357-0498
Compression Cup

123570498
3650.0220: RNCC: 3 | RNVC: 2
3650.0220: RNCC: 5 | RNVC: 9

26 Apr 2002

5340-12-384-9272
Dust And Moisture Seal Protective Plug

123849272
504045430: RNCC: 3 | RNVC: 2
98411844 TEIL 504045430: RNCC: 5 | RNVC: 2

11 Apr 2011

5340-12-385-1384
Dust And Moisture Seal Protective Cap

123851384
460190753: RNCC: 3 | RNVC: 2

4 May 2011

5340-12-386-5834
Angle Bracket

123865834
2500262-560100.004.0: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-392-0355
Mounting Bracket

123920355
TMEHP10-0: RNCC: 3 | RNVC: 2
0005466043: RNCC: 5 | RNVC: 2

26 Apr 2013

5340-12-315-9063
Loop Clamp

123159063
54.0026.237.00: RNCC: 3 | RNVC: 2
54002623700: RNCC: 5 | RNVC: 2

7 Dec 1988

5340-12-319-5417
Cremone Bolt

123195417
731.06.041: RNCC: 3 | RNVC: 2
V731.06.041: RNCC: 5 | RNVC: 2

11 Oct 1989

5340-12-327-6782
Electrical-Mechanical Equipment Post

123276782
CF 802 070 A: RNCC: 2 | RNVC: 2
CF 802 070 A: RNCC: 3 | RNVC: 2

18 Feb 1992

5340-12-701-9432
Rod End Clevis

127019432
5.12.0430.4024.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-302-6155
Double Angle Bracket

123026155
YK03410862: RNCC: 3 | RNVC: 2
03410862: RNCC: 5 | RNVC: 9
H.B.913SV 1056 1975 03 41 0862: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-360-0440
Mounting Bracket

123600440
9416161714: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-326-6049
Rod End Connector

123266049
2475-9201.00: RNCC: 3 | RNVC: 2
2475-9201.00: RNCC: 5 | RNVC: 2

11 Oct 1991

5340-12-370-8732
Rim Lock

123708732
51328: RNCC: 3 | RNVC: 2

11 Jan 2007

5340-12-357-9115
Runner

123579115
11066901: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-392-9857
Mounting Plate

123929857
4000004762: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-12-308-6244
Dust And Moisture Seal Protective Cap

123086244
63 6591 620 051: RNCC: 3 | RNVC: 2
7002909: RNCC: 5 | RNVC: 2

30 Oct 1986

5340-12-376-2228
Mounting Plate

123762228
5580780541: RNCC: 3 | RNVC: 2
5580780541: RNCC: 5 | RNVC: 2

28 Aug 2008

5340-12-198-7298
Retaining Strap

121987298
06678202211: RNCC: 3 | RNVC: 2

22 Feb 1984

5340-12-355-4250
Dust And Moisture Seal Protective Plug

123554250
4639970681: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-12-393-0221
Loop Clamp

123930221
15400022: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-189-4059
Loop Clamp

121894059
PAN4268-6-2: RNCC: 3 | RNVC: 2

24 Sep 1981

5340-12-385-9755
Access Hole Frame

123859755
2500262-394212.001.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-349-2861
Mounting Plate

123492861
1307 308 019: RNCC: 3 | RNVC: 2
1307 308 019: RNCC: 5 | RNVC: 2
1307 308 019: RNCC: 5 | RNVC: 2

20 Oct 1999

5340-12-312-0137
Butt Hinge Leaf

123120137
600853671: RNCC: 3 | RNVC: 2
81.61180.2021: RNCC: 5 | RNVC: 2
81611802021: RNCC: 5 | RNVC: 2

10 Nov 1987

5340-12-347-2085
Metallic Bumper

123472085
0716010025: RNCC: 3 | RNVC: 2

11 Nov 1998

5340-12-300-6624
Headless Straight Rod

123006624
1000091-4100: RNCC: 2 | RNVC: 2
1000091-4100: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-315-3195
Turnbuckle Body

123153195
028 060 181 016: RNCC: 3 | RNVC: 2
028060181016: RNCC: 5 | RNVC: 2

12 Oct 1988

5340-12-317-3569
Mounting Bracket

123173569
0242 7891: RNCC: 3 | RNVC: 2
02427891KZ0148-58: RNCC: 5 | RNVC: 2

31 Mar 1989

5340-12-316-4704
Access Cover

123164704
54.0026.866.00: RNCC: 3 | RNVC: 2
54002686600: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-349-4497
Metal Grille

123494497
T524M1512201: RNCC: 3 | RNVC: 2

17 Nov 1999

5340-12-163-5881
Metal Grille

121635881
67920010: RNCC: 3 | RNVC: 2
630713: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-394-0089
Angle Bracket

123940089
066511: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-12-702-5762
Mounting Bracket

127025762
VG95211-ML-127025762: RNCC: 2 | RNVC: 2
5.51.7801.0010.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-349-8923
Mounting Bracket

123498923
VG95211-ML-123498923: RNCC: 2 | RNVC: 2
T212M3003103: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-302-8430
Rigid Caster

123028430
6600117-440000.00: RNCC: 2 | RNVC: 2
6600117-440000.00: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-351-8961
Manual Control Handle

123518961
5801698-1301.00: RNCC: 2 | RNVC: 2
5801698-1301.00: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-12-333-8429
Helical Compression Spring Seat

123338429
7780 032 120: RNCC: 3 | RNVC: 2
81908300019: RNCC: 5 | RNVC: 2
81.90830-0019: RNCC: 5 | RNVC: 2
7780.032.120: RNCC: 5 | RNVC: 9
7780032120: RNCC: 5 | RNVC: 9

16 Feb 1994

5340-12-363-7939
Snap Hook

123637939
TL8465-0032-30: RNCC: 2 | RNVC: 2
M40: RNCC: 3 | RNVC: 2

24 Jul 2004

5340-12-313-6314
Angle Bracket

123136314
NO PRIMARY REF 12-313-6314: RNCC: 3 | RNVC: 2
7505 168433: RNCC: 5 | RNVC: 9

21 Apr 1988

5340-12-370-5276
Access Cover

123705276
3800-110: RNCC: 3 | RNVC: 2
809-185801: RNCC: 5 | RNVC: 2

17 Nov 2006

5340-12-155-0678
Loop Clamp

121550678
105-071-428-1: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-388-1317
Angle Bracket

123881317
2300586-192700.001.0: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-12-333-8304
Handle Grip

123338304
31055-02: RNCC: 3 | RNVC: 2
81.97001-0328: RNCC: 5 | RNVC: 2
81970010328: RNCC: 5 | RNVC: 2
3 1055 02: RNCC: 5 | RNVC: 2

15 Feb 1994

5340-12-354-8532
Dust And Moisture Seal Protective Cover

123548532
VG95211-ML-123548532: RNCC: 2 | RNVC: 2
P-876428-005: RNCC: 3 | RNVC: 2
P876428-005: RNCC: 5 | RNVC: 2

30 Aug 2001

5340-12-304-9688
Dust And Moisture Seal Protective Plug

123049688
320.131382: RNCC: 3 | RNVC: 2
13.1382: RNCC: 5 | RNVC: 9

12 Sep 1985

5340-12-354-8296
Angle Bracket

123548296
2300458-417200.001: RNCC: 2 | RNVC: 2
9944291: RNCC: 3 | RNVC: 2
2300458-417200.001: RNCC: 5 | RNVC: 9

29 Aug 2001

5340-12-334-5338
Lock-Release Lever

123345338
1000214-11333.03: RNCC: 2 | RNVC: 2
IR0111-00000WR2-00.03: RNCC: 3 | RNVC: 2

19 May 1994

5340-12-366-1360
Mounting Bracket

123661360
2500267-191810.018.0: RNCC: 2 | RNVC: 2
2500267-191810.018.0: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-12-701-2526
Mounting Plate

127012526
VG95211-ML-127012526: RNCC: 2 | RNVC: 2
5.12.4002.0202.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5765
Mounting Bracket

127025765
VG95211-ML-127025765: RNCC: 2 | RNVC: 2
5.51.7801.0101.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6061
Mounting Plate

127016061
VG95211-ML-127016061: RNCC: 2 | RNVC: 2
5.12.7002.1170.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-9537
Double Angle Bracket

121969537
A-295057-027: RNCC: 3 | RNVC: 2
A295057-027: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-320-4130
Mending Plate

123204130
G-111537: RNCC: 3 | RNVC: 2
G111537: RNCC: 5 | RNVC: 2

12 Jan 1990

5340-12-194-4672
Pipe Bracket

121944672
A-616784-401: RNCC: 3 | RNVC: 2
A616784-401: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-12-340-1370
Double Angle Bracket

123401370
726 22921 AAAA: RNCC: 3 | RNVC: 2
726 22921 AAAA-HDQA: RNCC: 5 | RNVC: 2

5 Mar 1996

5340-12-340-1369
Double Angle Bracket

123401369
726 22921 AABA: RNCC: 3 | RNVC: 2
726 22921 AABA-HDQA: RNCC: 5 | RNVC: 2

5 Mar 1996

5340-12-325-7597
Schlosz Schluessel

123257597
SCHLUESSEL 4010LI-BC0678: RNCC: 3 | RNVC: 2
BC0678: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-384-2795
Mounting Bracket

123842795
870/0632-660040.00: RNCC: 2 | RNVC: 2
870/0632-660040.00: RNCC: 3 | RNVC: 2

9 Feb 2011

5340-12-366-7916
Mechanical Stop

123667916
2300421-181195.000: RNCC: 2 | RNVC: 2
2300421-181195.000: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-12-164-4031
Dust And Moisture Seal Protective Plug

121644031
5077 309 013: RNCC: 3 | RNVC: 2
3330410021: RNCC: 5 | RNVC: 2
3330410026: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-163-7396
Loop Clamp

121637396
LN9491B45: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-315-8903
Access Cover

123158903
078011: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-12-183-2591
Retaining Strap

121832591
43709302-601: RNCC: 3 | RNVC: 2

28 Mar 1980

5340-12-333-8987
Plug Button

123338987
3376465034: RNCC: 3 | RNVC: 2

22 Feb 1994

5340-12-334-4913
Lock-Release Lever

123344913
16322501: RNCC: 3 | RNVC: 2

16 May 1994

5340-12-136-1072
Expansion Plug

121361072
6369971125: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-387-3297
Antipilferage Seal

123873297
248159: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-12-158-3956
Retaining Strap

121583956
136175: RNCC: 3 | RNVC: 2
136175: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-380-6435
Dust And Moisture Seal Protective Plug

123806435
979429: RNCC: 3 | RNVC: 2

16 Nov 2009

5340-12-193-8731
Mending Plate

121938731
5548233: RNCC: 3 | RNVC: 2
554.8233: RNCC: 5 | RNVC: 2

8 Sep 1982

5340-12-381-6995
Nonmetallic Solid Wheel

123816995
04 4344: RNCC: 3 | RNVC: 2

18 Mar 2010

5340-12-366-5751
Dust And Moisture Seal Protective Cap

123665751
200Z50X30: RNCC: 3 | RNVC: 2
GPN200Z50X30: RNCC: 5 | RNVC: 2

10 May 2005

5340-12-371-8734
Mounting Bracket

123718734
7103848: RNCC: 3 | RNVC: 2
7097800: RNCC: 5 | RNVC: 2

24 May 2007

5340-12-388-1976
Pipe Bracket

123881976
5840983939: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-326-9159
Protection Bellows

123269159
913.333: RNCC: 3 | RNVC: 2

8 Nov 1991

5340-12-360-6052
Mounting Bracket

123606052
EFP17002-2: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-12-198-3329
Angle Bracket

121983329
27 0306 011: RNCC: 2 | RNVC: 2
9848507: RNCC: 3 | RNVC: 9
27 0306 011: RNCC: 5 | RNVC: 2
27 0306 011: RNCC: 5 | RNVC: 9
270306011: RNCC: 5 | RNVC: 9

16 Jan 1984

5340-12-387-3897
Angle Bracket

123873897
5241534740: RNCC: 3 | RNVC: 2

8 Dec 2011

5340-12-310-9036
Shock Mount Pad

123109036
690949119: RNCC: 3 | RNVC: 2
81.25232.0037: RNCC: 5 | RNVC: 2

7 Jul 1987

5340-12-388-3536
Snap Hook

123883536
740430: RNCC: 3 | RNVC: 2

14 Mar 2012

5340-12-368-2587
Mounting Bracket

123682587
200-3606.03: RNCC: 3 | RNVC: 2

18 Jan 2006

5340-12-165-9337

5340-12-147-1385
Loop Clamp

121471385
16TAN15801-1-4544-9: RNCC: 3 | RNVC: 2
10N16TAN15801: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-356-5153
Angle Bracket

123565153
3.3421D: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-327-7144
Loop Clamp

123277144
DIN3016-1-D1-20X20-W5-CR: RNCC: 2 | RNVC: 2
RSGU1.20/20W5: RNCC: 3 | RNVC: 2
DIN3016-D1-20X20-W5: RNCC: 5 | RNVC: 9
DIN3016-D1-20X20-W3-1: RNCC: 5 | RNVC: 9

21 Feb 1992

5340-12-341-8487
Strap Fastener Loop

123418487
463-061970.000: RNCC: 3 | RNVC: 9

5 Nov 1996

5340-12-333-8856
Angle Bracket

123338856
404-5-12: RNCC: 3 | RNVC: 2
404-5.12: RNCC: 5 | RNVC: 2

21 Feb 1994

5340-12-362-4168
Mounting Bracket

123624168
E 490179-004.01.0 / A 490179.00-: RNCC: 3 | RNVC: 1

18 Feb 2004

5340-12-166-3458
Rod End Clevis

121663458
100429-41020-02-0: RNCC: 2 | RNVC: 2
100429-41020-02-0: RNCC: 5 | RNVC: 2

31 Aug 1976

5340-12-301-1641
Angle Bracket

123011641
A-243799-069: RNCC: 3 | RNVC: 2
A243799-069: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-339-4495
Mounting Plate

123394495
4139 306 515: RNCC: 3 | RNVC: 2
(241)A39630-124742: RNCC: 5 | RNVC: 2
4139306515: RNCC: 5 | RNVC: 2
0-124742: RNCC: 8 | RNVC: 2
1PA39630-124742: RNCC: 8 | RNVC: 2

24 Nov 1995

5340-12-351-7692
Butt Hinge Leaf

123517692
1036-U10: RNCC: 3 | RNVC: 2
91745967: RNCC: 5 | RNVC: 2

21 Aug 2000

5340-12-314-2056
Access Cover

123142056
272.1767.24031-12: RNCC: 2 | RNVC: 2
272.1767.24031-12: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-12-332-1477
Mounting Bracket

123321477
480-7345-04-16-00: RNCC: 3 | RNVC: 2
480/7345-04-16-00: RNCC: 5 | RNVC: 2

22 Jul 1993

5340-12-199-0757
Quick Release Plunger

121990757
530363-8010.000: RNCC: 3 | RNVC: 2
530363-8010: RNCC: 5 | RNVC: 9
530363-8010: RNCC: 5 | RNVC: 9
530363-8010.000: RNCC: 5 | RNVC: 9
530363.8010.000: RNCC: 5 | RNVC: 9

23 Mar 1984

5340-12-190-4621
Friction Catch

121904621
482.02.213: RNCC: 3 | RNVC: 2
482-02-213: RNCC: 5 | RNVC: 2

30 Nov 1981

5340-12-356-4867
Mechanical Stop

123564867
5055-013000.11B: RNCC: 2 | RNVC: 2
5055-013000.11B: RNCC: 3 | RNVC: 2

5 Mar 2002

5340-12-317-5953
Bail Handle

123175953
5802007-661221.01: RNCC: 2 | RNVC: 2
65.7789.151.01-A001: RNCC: 3 | RNVC: 2

20 Apr 1989

5340-12-305-2066
Webbing Strap

123052066
100375-019100.14: RNCC: 2 | RNVC: 2

8 Oct 1985

5340-12-387-6322
Mechanic Equipment Hardware Kit

123876322
5803746-203420.00: RNCC: 2 | RNVC: 2
7802903420: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-12-368-5547
Nonmetallic Bumper

123685547
83960206501: RNCC: 3 | RNVC: 2
83.96020-6501: RNCC: 5 | RNVC: 2

24 Mar 2006

5340-12-300-5227
Helical Compression Spring Seat

123005227
E4-2016020: RNCC: 3 | RNVC: 2
E4-2016020: RNCC: 5 | RNVC: 9
E4-2016020: RNCC: 5 | RNVC: 9

9 Aug 1984

5340-12-321-9168
Loop Clamp

123219168
DIN3016-1-A1-30X20-W1-2: RNCC: 2 | RNVC: 2
RS1.30/20: RNCC: 3 | RNVC: 2
DIN3016-A1-30X20-W1-2: RNCC: 3 | RNVC: 2
518575: RNCC: 5 | RNVC: 2
RS1100.30/20: RNCC: 5 | RNVC: 2
4730700082: RNCC: 5 | RNVC: 2
DIN3016-A1-30X20-W1-2: RNCC: 5 | RNVC: 9

9 Jul 1990

5340-12-132-1515
Loop Clamp

121321515
DIN71555-78,5-PHOSPHATIERT: RNCC: 2 | RNVC: 2
DIN71555-78,5-PHOSPHATIERT: RNCC: 3 | RNVC: 2
78,5/71555PH: RNCC: 3 | RNVC: 2
DIN71555-78-5PH0SPHATIERT: RNCC: 5 | RNVC: 2
78-5DIN71555PHRE: RNCC: 5 | RNVC: 2
DIN71555-78-5PH0SPHATIERT: RNCC: 5 | RNVC: 2
78-5DIN71555PH0SPHATIERT: RNCC: 5 | RNVC: 2
5500200078: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-310-6982
Access Hole Frame

123106982
1.014-11/53000.10: RNCC: 3 | RNVC: 2
1-014-11/53000-10: RNCC: 5 | RNVC: 2
21111087: RNCC: 5 | RNVC: 2
1-014-11/53000-10: RNCC: 5 | RNVC: 9
1.014-11/53000.10: RNCC: 5 | RNVC: 9

22 Jun 1987

5340-12-358-7880
Manual Control Lever

123587880
0008332325: RNCC: 3 | RNVC: 2
90.704.27.662: RNCC: 5 | RNVC: 2

14 Nov 2002

5340-12-301-3671
Plain Solid Disk

123013671
03180200: RNCC: 3 | RNVC: 2

10 Oct 1984

5340-12-324-2762
Extension Drawer Slide

123242762
335948-8293.000: RNCC: 2 | RNVC: 2
335948-8293.000: RNCC: 3 | RNVC: 2
335948-8293.000: RNCC: 5 | RNVC: 9

1 Feb 1991

5340-12-334-4197
Lock-Release Lever

123344197
1639204000: RNCC: 3 | RNVC: 2
16392040: RNCC: 5 | RNVC: 2

5 May 1994

5340-12-367-9906
Key Blank

123679906
7D0837219C: RNCC: 3 | RNVC: 2

15 Nov 2005

5340-12-367-4398
Loop Clamp

123674398
883 13: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-12-168-8266
Handwheel

121688266
WW110122AX: RNCC: 3 | RNVC: 2
WW110122AX: RNCC: 5 | RNVC: 2
WW 110 122 AX: RNCC: 5 | RNVC: 2
WW110122AX: RNCC: 5 | RNVC: 2

13 Apr 1977

5340-12-090-6956

5340-12-091-4891

5340-12-392-3546
Access Cover

123923546
7000143: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-370-1582
Spring Tension Clip

123701582
181083005: RNCC: 3 | RNVC: 2

26 Sep 2006

5340-12-350-5585
Dust And Moisture Seal Protective Cap

123505585
10063-321000.09: RNCC: 3 | RNVC: 2
10063-321000.09: RNCC: 5 | RNVC: 9

14 Apr 2000

5340-12-349-1340
Mounting Bracket

123491340
CZ 63010: RNCC: 3 | RNVC: 2
BOF21288: RNCC: 5 | RNVC: 2
2001: RNCC: 5 | RNVC: 9

29 Sep 1999

5340-12-177-1448
Loop Clamp

121771448
DIN3016-2-G1-96X25-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-96X25-W1-2: RNCC: 3 | RNVC: 2
SP96/25SK: RNCC: 3 | RNVC: 2
SP96-25SK: RNCC: 5 | RNVC: 2
1610000096: RNCC: 5 | RNVC: 2
DIN3016-G1-96X25-W1-2: RNCC: 5 | RNVC: 9
VG95931-G96X25-W1: RNCC: 5 | RNVC: 9
VG95931G96X25W1: RNCC: 5 | RNVC: 9

17 Jan 1979

5340-12-312-2214
Door Handle

123122214
0.26.1618.0: RNCC: 3 | RNVC: 2
1000-U14: RNCC: 3 | RNVC: 2
200-9419: RNCC: 3 | RNVC: 2

4 Dec 1987

5340-12-165-9122
Loop Clamp

121659122
DIN3016-1-D2-13-13X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-13-13X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.2X13/15: RNCC: 3 | RNVC: 2
4219215013: RNCC: 5 | RNVC: 2
RSGU1100-2X13-15: RNCC: 5 | RNVC: 2
RSGU1100.2X13/15: RNCC: 5 | RNVC: 2
1100 4499: RNCC: 5 | RNVC: 9
DIN3016-D2-13-13X15-W1-2: RNCC: 5 | RNVC: 9

15 Jul 1976

5340-12-320-9421
Kunst Gleitschiene

123209421
C26300-A9024-C521: RNCC: 3 | RNVC: 2

8 Mar 1990

5340-12-185-2468
Angle Bracket

121852468
NO PRIMARY REF 12-185-2468: RNCC: 3 | RNVC: 2
06-3-6965RE: RNCC: 5 | RNVC: 9
1-6899-06-3-6965RE: RNCC: 5 | RNVC: 9

23 Sep 1980

5340-12-374-1790
Section Block Clamp

123741790
700325010106: RNCC: 3 | RNVC: 2
4/2D9-10MMN325-CUZN37F29: RNCC: 5 | RNVC: 2

28 Jan 2008

5340-12-364-2792
Dust And Moisture Seal Protective Plug

123642792
209803: RNCC: 3 | RNVC: 2

7 Sep 2004

5340-12-381-1636
Dust And Moisture Seal Protective Cover

123811636
1947980: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-12-333-5166
Angle Bracket

123335166
5802017-703200.01: RNCC: 2 | RNVC: 2
5802017-703200.01: RNCC: 3 | RNVC: 2

29 Dec 1993

5340-12-193-2049
Spring Tension Clip

121932049
90.703.04.718: RNCC: 3 | RNVC: 2
0008352234: RNCC: 5 | RNVC: 2

30 Jun 1982

5340-12-333-2260
Angle Bracket

123332260
6014750004: RNCC: 3 | RNVC: 2

11 Nov 1993

5340-12-375-4307
Buckle

123754307
R53025: RNCC: 3 | RNVC: 2

2 Jun 2008

5340-12-351-5034
Multiple Angle Bracket

123515034
4616100636: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-333-3432
Mounting Bracket

123333432
160-75749: RNCC: 3 | RNVC: 2
160-75749: RNCC: 5 | RNVC: 9

3 Dec 1993

5340-12-042-1622

5340-12-300-4216
Mending Plate

123004216
AZ8104T038: RNCC: 3 | RNVC: 2
AZ8104T038: RNCC: 5 | RNVC: 9
AZ8104T038: RNCC: 5 | RNVC: 9

1 Aug 1984

5340-12-366-9471
Sealing Plug Assembly

123669471
0000LLCB26199: RNCC: 3 | RNVC: 2

23 Jun 2005

5340-12-357-3594
Strap Hinge

123573594
351.01.538: RNCC: 3 | RNVC: 2

12 Jun 2002

5340-12-389-1308
Expansion Shield

123891308
061120: RNCC: 3 | RNVC: 2

30 May 2012

5340-12-391-1554
Expansion Shield

123911554
2351021: RNCC: 3 | RNVC: 2

21 Feb 2013

5340-12-122-7700
Rubber Bumper

121227700
NO PRIMARY REF 12-122-7700: RNCC: 3 | RNVC: 2
0009830600: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-0607
Lock-Release Lever

123050607
73.1-03.2: RNCC: 3 | RNVC: 2
P009271569623062: RNCC: 5 | RNVC: 2

24 Sep 1985

5340-12-386-2044
Retaining Strap

123862044
2500261-187770.001.0: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-344-4887
Angle Bracket

123444887
2500255-190000.063.0: RNCC: 2 | RNVC: 2
2500255-190000.063.0: RNCC: 3 | RNVC: 2

3 Nov 1997

5340-12-190-7177
Extension Drawer Slide Section

121907177
NO PRIMARY REF 12-190-7177: RNCC: 3 | RNVC: 2
6934 136764: RNCC: 5 | RNVC: 9
6934136764: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-198-7981
Mending Plate

121987981
5801998-296000.00: RNCC: 2 | RNVC: 2
5801998-296000.00: RNCC: 3 | RNVC: 2

27 Feb 1984

5340-12-338-8018
Mounting Plate

123388018
6700017-203340.00: RNCC: 2 | RNVC: 2
6700017-203340.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-172-8612
Dust And Moisture Seal Protective Cap

121728612
SW17-2H5M10: RNCC: 3 | RNVC: 2
SIKAPPESW17-2H5M10P0LYAETHYLEN: RNCC: 5 | RNVC: 2
01164723: RNCC: 5 | RNVC: 2
1164723EY8928-70: RNCC: 5 | RNVC: 2
B17X16-5H2870: RNCC: 5 | RNVC: 2

27 Feb 1978

5340-12-178-2287
Mending Plate

121782287
C106-A44-C108: RNCC: 2 | RNVC: 2
C106A44C108: RNCC: 3 | RNVC: 2
C106A44C108: RNCC: 5 | RNVC: 2
C106-A44-C108: RNCC: 5 | RNVC: 2
C106-A44-C108: RNCC: 5 | RNVC: 2

9 Apr 1979

5340-12-167-5466
Nonmetallic Bumper

121675466
B224345: RNCC: 3 | RNVC: 2
3555498: RNCC: 5 | RNVC: 2
2853-5384-00: RNCC: 5 | RNVC: 2
3555498: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-330-1476
Casement Fastener

123301476
2138-942-96: RNCC: 3 | RNVC: 2
2138 942 96: RNCC: 5 | RNVC: 2

10 Nov 1992

5340-12-391-1524
Clamping Catch

123911524
598101-183600.016.0: RNCC: 3 | RNVC: 2

21 Feb 2013

5340-12-306-0656
Mending Plate

123060656
5801984-100000.021.0: RNCC: 2 | RNVC: 2
5801984-100000.021.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-190-0442
Retaining Strap

121900442
F1143386-0038: RNCC: 3 | RNVC: 2
F11.43386-0038: RNCC: 5 | RNVC: 2
F11.43386-0038: RNCC: 5 | RNVC: 2

4 Nov 1981

5340-12-310-6531
Angle Bracket

123106531
2500179-000200.002.0: RNCC: 2 | RNVC: 2
2500179-000200.002.0: RNCC: 3 | RNVC: 2

12 Jun 1987

5340-12-364-3932
Spacing Threaded Standoff

123643932
598101-183400.040.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-303-0477
Mending Plate

123030477
5801758-6151.00: RNCC: 2 | RNVC: 2
5801758-6151.00: RNCC: 3 | RNVC: 2
5801758-6151.00: RNCC: 5 | RNVC: 9

22 Feb 1985

5340-12-122-6810

5340-12-313-2188
Double Angle Bracket

123132188
2469919: RNCC: 3 | RNVC: 2
2469919EE5022-71: RNCC: 5 | RNVC: 2

11 Mar 1988

5340-12-178-3361
Strap Fastener Loop

121783361
3200015: RNCC: 3 | RNVC: 2
33240: RNCC: 5 | RNVC: 2

12 Apr 1979

5340-12-359-7328
Mounting Bracket

123597328
S281M3018101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-322-5731
Rod End Clevis

123225731
02497038: RNCC: 3 | RNVC: 2

3 Sep 1990

5340-12-354-1404
Dust And Moisture Seal Protective Plug

123541404
R52603: RNCC: 3 | RNVC: 2

8 Jun 2001

5340-12-326-3318
Loop Clamp

123263318
6773047981: RNCC: 3 | RNVC: 2

2 Sep 1991

5340-12-317-8378
Access Cover

123178378
3719102: RNCC: 3 | RNVC: 2

18 May 1989

5340-12-359-7317
Mending Plate

123597317
S281M2035101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-198-7243
Resilient Mount

121987243
1547643.70.ST: RNCC: 3 | RNVC: 2
741026HART: RNCC: 3 | RNVC: 2
57410260043: RNCC: 5 | RNVC: 2
0002232612: RNCC: 5 | RNVC: 2
1547643: RNCC: 5 | RNVC: 9
1547643: RNCC: 5 | RNVC: 9

22 Feb 1984

5340-12-348-1919
Track Stop

123481919
PLASTIKARRETIERUNG HAEFELE: RNCC: 3 | RNVC: 9

4 May 1999

5340-12-368-5832
Loop Clamp

123685832
5341663: RNCC: 3 | RNVC: 2

28 Mar 2006

5340-12-354-5948
Nonmetallic Bumper

123545948
35431754: RNCC: 3 | RNVC: 2

7 Aug 2001

5340-12-386-9513
Manual Control Handle

123869513
05570599: RNCC: 3 | RNVC: 2
CV190474: RNCC: 5 | RNVC: 2
05570599: RNCC: 5 | RNVC: 2

20 Oct 2011

5340-12-316-5390
Strap Hinge

123165390
2300033-304100.08A: RNCC: 2 | RNVC: 2
2300033-304100.08A: RNCC: 5 | RNVC: 9
2300033-304100.08A: RNCC: 5 | RNVC: 9

24 Jan 1989

5340-12-310-0573
Nonmetallic Bumper

123100573
6279839: RNCC: 3 | RNVC: 2

2 Apr 1987

5340-12-195-0172
Mending Plate

121950172
5577344: RNCC: 3 | RNVC: 2
557.7344: RNCC: 5 | RNVC: 2

30 Dec 1982

5340-12-336-6579
Catch Strike

123366579
181223501: RNCC: 2 | RNVC: 2
181223501: RNCC: 3 | RNVC: 2
E181223501: RNCC: 5 | RNVC: 2

6 Dec 1994

5340-12-360-7146
Mechanic Equipment Hardware Kit

123607146
58353 00020: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-318-7593
Sealing Plug Assembly

123187593
200200.0101.000: RNCC: 3 | RNVC: 2
2002.01.01.000: RNCC: 5 | RNVC: 9

15 Aug 1989

5340-12-343-4335
Mounting Bracket

123434335
068130143C: RNCC: 3 | RNVC: 2
N01470210: RNCC: 5 | RNVC: 9
F300 0T 023 1163: RNCC: 6 | RNVC: 9

19 Jun 1997

5340-12-361-5445
Mounting Plate

123615445
230.6008: RNCC: 3 | RNVC: 2
230.6008.001: RNCC: 5 | RNVC: 2

16 Oct 2003

5340-12-380-3430
Dust And Moisture Seal Protective Cap

123803430
4259980003: RNCC: 3 | RNVC: 2

21 Oct 2009

5340-12-093-8454

5340-12-391-9114
Bumper

123919114
127651: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-12-168-5220
Retaining Strap

121685220
WW406938: RNCC: 3 | RNVC: 2
WW406938: RNCC: 5 | RNVC: 2
WW 406 938: RNCC: 5 | RNVC: 2
WW406938: RNCC: 5 | RNVC: 2

18 Mar 1977

5340-12-197-3877
Resilient Mount

121973877
0009960040: RNCC: 3 | RNVC: 2

18 Oct 1983

5340-12-181-7956
Angle Bracket

121817956
124142: RNCC: 3 | RNVC: 2

17 Dec 1979

5340-12-344-6420

5340-12-179-2689
Strap Bolt

121792689
4260812: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-188-9966
Mending Plate

121889966
9458923: RNCC: 3 | RNVC: 2
25188100005000: RNCC: 5 | RNVC: 2
F300 0T 001 2905: RNCC: 6 | RNVC: 9

17 Aug 1981

5340-12-320-2206
Angle Bracket

123202206
5802298-210000.03: RNCC: 2 | RNVC: 2
5802298-210000.03: RNCC: 3 | RNVC: 2

19 Dec 1989

5340-12-147-2131
Hinged Hasp

121472131
2377-8410-00: RNCC: 2 | RNVC: 2
2377-8410-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-155-3250
Butt Hinge Leaf

121553250
160-33166-06: RNCC: 3 | RNVC: 2
160-33166-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-361-4625
Angle Bracket

123614625
67587-655: RNCC: 3 | RNVC: 2

6 Oct 2003

5340-12-370-9352
Mounting Bracket

123709352
82152400077: RNCC: 3 | RNVC: 2
82.15240-0077: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-12-184-7781
Mounting Plate

121847781
5801505-313.001: RNCC: 3 | RNVC: 2
5801505-313-001: RNCC: 5 | RNVC: 2

16 Aug 1980

5340-12-378-0196
Loop Clamp

123780196
41233154: RNCC: 3 | RNVC: 2

5 Mar 2009

5340-12-026-8322

5340-12-307-7552
Double Angle Bracket

123077552
RP650553: RNCC: 3 | RNVC: 2

23 Jul 1986

5340-12-191-8145
Pad Eye

121918145
4405514740: RNCC: 3 | RNVC: 2

8 Mar 1982

5340-12-334-0809
Quick Release Plunger

123340809
2207.216: RNCC: 3 | RNVC: 2
1067270C00: RNCC: 5 | RNVC: 2

17 Mar 1994

5340-12-329-9199
Caster Wheel

123299199
08R100CZ: RNCC: 3 | RNVC: 2
115024: RNCC: 3 | RNVC: 2

13 Oct 1992

5340-12-123-9037
Dust And Moisture Seal Protective Plug

121239037
81613404009: RNCC: 3 | RNVC: 2
117F1055D0: RNCC: 5 | RNVC: 2
91.17360-1055: RNCC: 5 | RNVC: 2
91173601055: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-355-5804
Headless Straight Rod

123555804
2125-131100.04B: RNCC: 2 | RNVC: 2
2125-131100.04B: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-12-702-2100
Mounting Plate

127022100
VG95211-ML-127022100: RNCC: 2 | RNVC: 2
30.7215.95: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-333-3533
Mending Plate

123333533
4900344-201500.01: RNCC: 2 | RNVC: 2
4900344-201500.01: RNCC: 3 | RNVC: 2

6 Dec 1993

5340-12-302-5123
Electrical-Mechanical Equipment Post

123025123
VG95148B5,5XM3X16-ST: RNCC: 2 | RNVC: 2
43712117-601: RNCC: 2 | RNVC: 2
43712117-601: RNCC: 3 | RNVC: 2
VG95148B5,5XM3X16-ST: RNCC: 3 | RNVC: 2
43712117-601: RNCC: 5 | RNVC: 2

9 Jan 1985

5340-12-365-7809
Dust And Moisture Seal Protective Plug

123657809
0117 9079: RNCC: 3 | RNVC: 2
H2873-E15,6X8-PHT-WS: RNCC: 5 | RNVC: 2

2 Feb 2005

5340-12-182-3584
Webbing Strap

121823584
5800265-0208: RNCC: 2 | RNVC: 2
5800265-0208: RNCC: 3 | RNVC: 2
5800265-0208: RNCC: 5 | RNVC: 9
5800265-0208: RNCC: 5 | RNVC: 9
000-A1-20X2,0X1100-PE-RAL6031: RNCC: 6 | RNVC: 9

28 Jan 1980

5340-12-389-9154
Access Cover

123899154
2300560-189812.000.0: RNCC: 2 | RNVC: 2
2300560-189812.000.0: RNCC: 3 | RNVC: 2

12 Sep 2012

5340-12-360-9361
Latch Bar

123609361
0001-112031-000-0: RNCC: 3 | RNVC: 2
0001-112031-000-0: RNCC: 5 | RNVC: 9

25 Jul 2003

5340-12-324-8079
Padlock

123248079
85/30KA402 M. MS-FLACHKETTE: RNCC: 3 | RNVC: 2
85/30MITLASCHE-KETTE-MS-KA402: RNCC: 5 | RNVC: 2
0745231302: RNCC: 5 | RNVC: 9

25 Mar 1991

5340-12-351-5856
T Bracket

123515856
160-88312-02: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-12-192-3411
Retaining Strap

121923411
VG95933GR-18-W1-BK: RNCC: 2 | RNVC: 2
2/2D18MMN325: RNCC: 3 | RNVC: 2
700325018105: RNCC: 5 | RNVC: 2
2-2D18MMN325: RNCC: 5 | RNVC: 2

15 Apr 1982

5340-12-701-7126
Loop Clamp

127017126
VG95211-ML-127017126: RNCC: 2 | RNVC: 2
5.12.7601.3250.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-389-0956
Section Block Clamp

123890956
H35917: RNCC: 3 | RNVC: 2
F1.1697-00-01-17.00-01: RNCC: 5 | RNVC: 2

25 May 2012

5340-12-177-0929
Webbing Strap

121770929
2300012-4125.00: RNCC: 2 | RNVC: 2
2300012-4125-00: RNCC: 5 | RNVC: 2
2300012-4125-00: RNCC: 5 | RNVC: 9
2300012-4125-00: RNCC: 5 | RNVC: 9
000-D8-25X2,5X200-BW-RAL0631: RNCC: 6 | RNVC: 9

15 Jan 1979

5340-12-166-9089
Retaining Strap

121669089
5800748-11.133: RNCC: 3 | RNVC: 2
5800748-11-133: RNCC: 5 | RNVC: 9

29 Oct 1976

5340-12-313-3515
Loop Clamp

123133515
SP106/12SZ: RNCC: 3 | RNVC: 2
01310005106: RNCC: 5 | RNVC: 2
1310005106: RNCC: 5 | RNVC: 2
SP106/12ZY: RNCC: 5 | RNVC: 9

24 Mar 1988

5340-12-164-7739
Resilient Mount

121647739
845-CP9.60-NR65.ST: RNCC: 3 | RNVC: 2
CP9.60/26A21: RNCC: 3 | RNVC: 9
0744-022: RNCC: 5 | RNVC: 2
0744022: RNCC: 5 | RNVC: 2
8406252: RNCC: 5 | RNVC: 2
CP9-60-26A: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-150-6324
Loop Clamp

121506324
G9TAN15802-0: RNCC: 3 | RNVC: 2
G9TAN15802-3.1364.5: RNCC: 5 | RNVC: 2
G9TAN15802-3-1364-5: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-318-8692
Cane Bolt

123188692
702-713200-001-0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-701-8555
Loop Clamp

127018555
VG95211-ML-127018555: RNCC: 2 | RNVC: 2
5891A-4: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-368-4885
Loop Clamp

123684885
DIN3016-1-D1-43X20-W1-2-CR: RNCC: 2 | RNVC: 2

16 Mar 2006

5340-12-320-6192
Handle Grip

123206192
2654-337300.03: RNCC: 2 | RNVC: 2
2654-337300.03: RNCC: 3 | RNVC: 2
2654-337 300.03: RNCC: 5 | RNVC: 9
679-09030000.03: RNCC: 5 | RNVC: 9
679-09030000.03: RNCC: 5 | RNVC: 9

31 Jan 1990

5340-12-342-6863
Mounting Plate

123426863
1206 7294: RNCC: 3 | RNVC: 2
12067294ED011-48: RNCC: 5 | RNVC: 9
3-601-9-634-004-4: RNCC: 5 | RNVC: 9
3.601.9.634.004.4: RNCC: 5 | RNVC: 9

17 Mar 1997

5340-12-180-0456
Resilient Mount

121800456
DIN95363-A30X20-NR60ST-M8X13: RNCC: 2 | RNVC: 2
811.000.030.020.08X13.NR60.ST: RNCC: 5 | RNVC: 2
81100-30X20-M8X13.NR60.ST: RNCC: 5 | RNVC: 2
6089880011: RNCC: 5 | RNVC: 2
1.30.20.1.60NR/ST-M8X13: RNCC: 5 | RNVC: 2
VG95363-A30X20-M8X13-NR60ST: RNCC: 5 | RNVC: 9
VG95363-A30X20-NR60ST-M8X13: RNCC: 5 | RNVC: 9
VG95363-A30X20X13-NR60ST: RNCC: 5 | RNVC: 9

17 Aug 1979

5340-12-702-5692
Mounting Bracket

127025692
VG95211-ML-127025692: RNCC: 2 | RNVC: 2
5.51.7701.1010.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-361-6486
Loop Clamp

123616486
R99154: RNCC: 3 | RNVC: 2
51.97401-6065: RNCC: 5 | RNVC: 2
51974016065: RNCC: 5 | RNVC: 2

29 Oct 2003

5340-12-337-1145
Access Cover

123371145
2782-250100.002.0: RNCC: 2 | RNVC: 2
2782-250100.002.0: RNCC: 3 | RNVC: 2

19 Jan 1995

5340-12-379-6469
Elastic Strap

123796469
PGGT-LL-8MR-8,5M: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-12-339-7013
Resilient Mount

123397013
2500255-190502.000.0: RNCC: 2 | RNVC: 2
DIN95363-D30X20-M8X10-NBR50ST: RNCC: 2 | RNVC: 2
2500255-190502.000.0: RNCC: 5 | RNVC: 2
2500255-190502.000.0: RNCC: 5 | RNVC: 2
VG95363-D30X20-M8X10-NBR60ST: RNCC: 5 | RNVC: 9

22 Dec 1995

5340-12-139-7558
Resilient Mount

121397558
27859.NR65.ST: RNCC: 3 | RNVC: 2
27859BSTN6590: RNCC: 3 | RNVC: 2
27859,NR65ST: RNCC: 5 | RNVC: 2
0005410009: RNCC: 5 | RNVC: 2
27859SM650: RNCC: 5 | RNVC: 2
27859FI50: RNCC: 5 | RNVC: 2
27859FJ50: RNCC: 5 | RNVC: 2
VG95365-A2-NR65ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-9434
Retaining Strap

123019434
20-5170-103: RNCC: 3 | RNVC: 2

20 Nov 1984

5340-12-702-5400
Mounting Bracket

127025400
VG95211-ML-127025400: RNCC: 2 | RNVC: 2
5.51.7204.1830.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-338-9281
Lock-Release Lever

123389281
PM3264/5: RNCC: 3 | RNVC: 2
PM3264-5: RNCC: 5 | RNVC: 2

11 Sep 1995

5340-12-326-7788
Angle Bracket

123267788
E-4997-01-62: RNCC: 3 | RNVC: 2

24 Oct 1991

5340-12-300-8723
Mending Plate

123008723
596339-001: RNCC: 3 | RNVC: 2
M1423-948036: RNCC: 3 | RNVC: 9
6552043200: RNCC: 5 | RNVC: 2
TK5340-062: RNCC: 5 | RNVC: 9
1423-948.36(4): RNCC: 5 | RNVC: 9
TK-BA35-5340-454: RNCC: 5 | RNVC: 9

6 Sep 1984

5340-12-356-4578
Webbing Strap

123564578
SR-220-109/4,5M+2XSP252: RNCC: 3 | RNVC: 2

1 Mar 2002

5340-12-307-3270
Angle Bracket

123073270
25704-289732.01.0: RNCC: 2 | RNVC: 2
84027-13.12.01.0: RNCC: 3 | RNVC: 2
84027-13-12-01-0: RNCC: 5 | RNVC: 9
84027-13.12.01.0: RNCC: 5 | RNVC: 9

4 Jun 1986

5340-12-171-0654
Tee Hinge

121710654
81629106005: RNCC: 3 | RNVC: 2
23230-172434-000-0: RNCC: 5 | RNVC: 9
23230-172434.000.0: RNCC: 5 | RNVC: 9

5 Sep 1977

5340-12-186-6969
Mending Plate

121866969
25704-350600.08.0: RNCC: 2 | RNVC: 2
25704-350600.08.0: RNCC: 3 | RNVC: 2
25704-350600.08.0: RNCC: 3 | RNVC: 2
25704-350600-08-0: RNCC: 5 | RNVC: 2
25704-350600-08-0: RNCC: 5 | RNVC: 9
25704-350600.08.0: RNCC: 5 | RNVC: 9
25704-350600.08.0: RNCC: 5 | RNVC: 9

28 Jan 1981

5340-12-337-3374
Loop Clamp

123373374
DIN3016-1-A1-19X15-BZ: RNCC: 2 | RNVC: 2
RS1.19/15-BZ: RNCC: 3 | RNVC: 2
DIN3016-A1-19X15-BRONZE: RNCC: 3 | RNVC: 2
RS1-19/15-BZ: RNCC: 5 | RNVC: 2
RS 1.19/15-BZ: RNCC: 5 | RNVC: 2
MR200(A0)6598/50: RNCC: 5 | RNVC: 2
RS1.19/15-BRONZE: RNCC: 5 | RNVC: 2
RS1100.19/15 BRONZE: RNCC: 5 | RNVC: 2
MR200(A0)6598 ITEM 50: RNCC: 5 | RNVC: 2
DIN3016-A1-19X15-BZ: RNCC: 5 | RNVC: 9

16 Feb 1995

5340-12-351-5054
Angle Bracket

123515054
4617150112: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-320-2058
Access Cover

123202058
4212610033: RNCC: 3 | RNVC: 2

18 Dec 1989

5340-12-180-4693
Mounting Bracket

121804693
3816220214: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-330-0065
Plug Button

123300065
4609870144: RNCC: 3 | RNVC: 2

21 Oct 1992

5340-12-357-9171
Dust And Moisture Seal Protective Cover

123579171
2300042-254310.000: RNCC: 2 | RNVC: 2
2300042-254310.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-090-7293

5340-12-322-6060
Access Cover

123226060
04160: RNCC: 3 | RNVC: 2

5 Sep 1990

5340-12-332-9950
Mounting Bracket

123329950
105-80714: RNCC: 3 | RNVC: 2

19 Oct 1993

5340-12-091-8677

5340-12-133-4044

5340-12-360-2101
Retaining Strap

123602101
81974010524: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-341-7028
Casement Fastener

123417028
44.5102: RNCC: 3 | RNVC: 2
44.5102: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-12-370-6343
Mounting Plate

123706343
342.21.910: RNCC: 3 | RNVC: 2
173L6100: RNCC: 5 | RNVC: 2

4 Dec 2006

5340-12-351-5407
Angle Bracket

123515407
7802781830: RNCC: 2 | RNVC: 2
7802781830: RNCC: 5 | RNVC: 2
78027 81830: RNCC: 5 | RNVC: 9

2 Aug 2000

5340-12-010-8481

5340-12-345-4104
Double Angle Bracket

123454104
8712033540: RNCC: 2 | RNVC: 2
8712033540: RNCC: 3 | RNVC: 2
871 203 35 40: RNCC: 5 | RNVC: 2

11 Mar 1998

5340-12-346-1432
Mounting Plate

123461432
E24574: RNCC: 3 | RNVC: 2

18 Jun 1998

5340-12-387-3976
Dust And Moisture Seal Protective Cap

123873976
DR4002T063: RNCC: 3 | RNVC: 2

9 Dec 2011

5340-12-365-8531
Fuehrungss Gleiter

123658531
05091101: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-12-366-6485
Latch Bar

123666485
19005815: RNCC: 3 | RNVC: 2

19 May 2005

5340-12-022-0263

5340-12-305-7624

5340-12-390-0612
Mounting Bracket

123900612
T257M2109108: RNCC: 3 | RNVC: 2

28 Sep 2012

5340-12-348-6270
Webbing Strap

123486270
01155-1-1.5M: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-12-315-3537
Sealing Plug Assembly

123153537
1463203356: RNCC: 3 | RNVC: 2

14 Oct 1988

5340-12-348-6766
Mounting Bracket

123486766
2300387-660310.007: RNCC: 2 | RNVC: 2
9908659: RNCC: 3 | RNVC: 2
2300387-660310.007: RNCC: 5 | RNVC: 9
9908659: RNCC: 5 | RNVC: 9

4 Aug 1999

5340-12-164-0982
Nonmetallic Bumper

121640982
6X8X0-5: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-126-0333

5340-12-145-5353

5340-12-393-3549
Manual Control Lever

123933549
210842: RNCC: 3 | RNVC: 2

10 Sep 2013

5340-12-163-2924
Retaining Strap

121632924
DIN3016-1-F1-25,4X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-25,4X15-W1-2: RNCC: 3 | RNVC: 2
RSGU2.25,4/15: RNCC: 3 | RNVC: 2
RSGU1200-25-4-15: RNCC: 5 | RNVC: 2
RSGU1200.25,4/15: RNCC: 5 | RNVC: 2
DIN3016-F1-25,4X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-F25,4X15-W1: RNCC: 5 | RNVC: 9
VG95931F25-4X15W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-156-8900
Resilient Mount

121568900
DIN95363-A30X30-M8X23-NR45ST: RNCC: 2 | RNVC: 2
500033-M8X23.NR45.ST: RNCC: 5 | RNVC: 2
30-30-100-45SH0RE: RNCC: 5 | RNVC: 2
5218067.50: RNCC: 5 | RNVC: 2
5218067/11MN45: RNCC: 5 | RNVC: 2
VG95363-A30X30-M8X23-NR50ST: RNCC: 5 | RNVC: 9
521806713: RNCC: 5 | RNVC: 9
06-1-6733-8: RNCC: 5 | RNVC: 9
VG95363-A30X30-M8X23-NR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-0141
Double Angle Bracket

123130141
P-086147-079: RNCC: 3 | RNVC: 2
P086147-079: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-300-0464
Helical Compression Spring Seat

123000464
5055604: RNCC: 3 | RNVC: 2
50-5-5604: RNCC: 5 | RNVC: 2

27 Jun 1984

5340-12-192-8620
Spring Tension Clip

121928620
P-161: RNCC: 3 | RNVC: 2
4608870114: RNCC: 5 | RNVC: 2
7928-15: RNCC: 5 | RNVC: 2
0039881778: RNCC: 5 | RNVC: 2
721 1 68 021 1: RNCC: 5 | RNVC: 9

1 Jun 1982

5340-12-362-0716
Double Angle Bracket

123620716
J28130054-403: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-177-8159
Electrical-Mechanical Equipment Post

121778159
VG95148A5XM3X15-NRST: RNCC: 2 | RNVC: 2
V22-918-152000-03: RNCC: 3 | RNVC: 2
VG95148A5XM3X15-NRST: RNCC: 3 | RNVC: 2

23 Feb 1979

5340-12-172-7202
Clamping Catch

121727202
4592038921: RNCC: 3 | RNVC: 2
23290-033260: RNCC: 5 | RNVC: 9

14 Feb 1978

5340-12-345-2996
Mounting Plate

123452996
VG95211-ML-123452996: RNCC: 2 | RNVC: 2
VD-41-10-00632-124: RNCC: 3 | RNVC: 2

27 Feb 1998

5340-12-339-7102
Mounting Plate

123397102
2500255-000400.020.0: RNCC: 2 | RNVC: 2
2500255-000400.020.0: RNCC: 3 | RNVC: 2

29 Dec 1995

5340-12-386-2295
Access Cover

123862295
2500261-182403.000.0: RNCC: 2 | RNVC: 2
2500261-182403.000.0: RNCC: 3 | RNVC: 2

17 Aug 2011

5340-12-355-3759
Loop Clamp

123553759
DIN3016-1-D2-14-14X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-14-14X15-W1-2: RNCC: 5 | RNVC: 9

8 Nov 2001

5340-12-155-9789
Loop Clamp

121559789
1216 7673: RNCC: 3 | RNVC: 2
6-420-0-473-002-4: RNCC: 5 | RNVC: 9
6.420.0.473.002.4: RNCC: 5 | RNVC: 9
12167673: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-331-8366
Angle Bracket

123318366
7068-21280-001-2: RNCC: 3 | RNVC: 2

25 Jun 1993

5340-12-316-4763
Angle Bracket

123164763
5600023-190230.001.0: RNCC: 2 | RNVC: 2
5600023-190230.001.0: RNCC: 3 | RNVC: 2
1519755: RNCC: 5 | RNVC: 2
22012.0.08.400.01: RNCC: 5 | RNVC: 2
22012.0.08.400.01: RNCC: 5 | RNVC: 9

19 Jan 1989

5340-12-356-3776
Retaining Band

123563776
9019A1001-02: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-12-309-8190
Dust And Moisture Seal Protective Cap

123098190
320-997001-10: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-12-702-6389
Retaining Strap

127026389
VG95211-ML-127026389: RNCC: 2 | RNVC: 2
84.7208-1270-11: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-394-3174
Lock-Release Lever

123943174
207-9203: RNCC: 3 | RNVC: 2
37000-28: RNCC: 5 | RNVC: 2

20 Nov 2013

5340-12-384-1613
Loop Clamp

123841613
DIN3015-LE-3G-20-PA-W1: RNCC: 2 | RNVC: 2

27 Jan 2011

5340-12-321-2721
Mounting Bracket

123212721
5803462-270-00: RNCC: 2 | RNVC: 2
FE97-270-00: RNCC: 3 | RNVC: 2

26 Apr 1990

5340-12-184-1221
Resilient Mount Adapter

121841221
009-053.061-008: RNCC: 3 | RNVC: 2
009-053-061-008: RNCC: 5 | RNVC: 9

24 Jun 1980

5340-12-305-1151
Mending Plate

123051151
4900059-212000.012.0: RNCC: 3 | RNVC: 2
1225662: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-193-1615
Compression Cup

121931615
N 109: RNCC: 3 | RNVC: 2
905-00109-00: RNCC: 5 | RNVC: 2
905-00109-00: RNCC: 5 | RNVC: 9
N 109: RNCC: 5 | RNVC: 9

28 Jun 1982

5340-12-359-6023
Loop Clamp

123596023
071555048503: RNCC: 3 | RNVC: 2
DIN71555-48,5DBL7398.30: RNCC: 5 | RNVC: 9

20 Feb 2003

5340-12-306-0708
Angle Bracket

123060708
5801984-201010.005.0: RNCC: 2 | RNVC: 2
5801984-201010.005.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-172-7593
Retaining Strap

121727593
23176-208232.01.0: RNCC: 2 | RNVC: 2
23176-208232.01.0: RNCC: 3 | RNVC: 2
23176-208232-01-0: RNCC: 5 | RNVC: 2
23176-208232-01-0: RNCC: 5 | RNVC: 9
23176-208232.01.0: RNCC: 5 | RNVC: 9

20 Feb 1978

5340-12-319-7145
Lock-Release Lever

123197145
2300232-183510.000.0: RNCC: 2 | RNVC: 2
2300232-183510.000.0: RNCC: 3 | RNVC: 2
2300232-183500.000.02: RNCC: 5 | RNVC: 9

27 Oct 1989

5340-12-179-9919
Angle Bracket

121799919
2300014-189320-01-0: RNCC: 3 | RNVC: 2
2300014-189320-01-0: RNCC: 5 | RNVC: 9
2300014-189320.01.0: RNCC: 5 | RNVC: 9

17 Aug 1979

5340-12-146-9266
Webbing Strap

121469266
25704-193112.00.0: RNCC: 2 | RNVC: 2
25704-193112.00.0: RNCC: 3 | RNVC: 2
25704-193112.00.0: RNCC: 3 | RNVC: 2
25704-193112-00-0: RNCC: 5 | RNVC: 2
25704-193112.00.0: RNCC: 5 | RNVC: 9
25704-193112-00-0: RNCC: 5 | RNVC: 9
25704-193112.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-5842
Mending Plate

121975842
A-230129-157: RNCC: 3 | RNVC: 2
A230129-157: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-326-4401
Handle Grip

123264401
052 965: RNCC: 3 | RNVC: 2
1-100-77A-4: RNCC: 5 | RNVC: 2
1052965: RNCC: 5 | RNVC: 2
052965: RNCC: 5 | RNVC: 9

16 Sep 1991

5340-12-301-1287
Angle Bracket

123011287
A-243799-029: RNCC: 3 | RNVC: 2
A243799-029: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-321-6160
Metallic Solid Wheel

123216160
702-132300-912-0: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-339-6963
Threaded Rod End

123396963
1242670032: RNCC: 3 | RNVC: 2
124 267 00 32: RNCC: 5 | RNVC: 2

21 Dec 1995

5340-12-319-5456
Mending Plate

123195456
504512: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-12-305-0059
Double Angle Bracket

123050059
0241 3180: RNCC: 3 | RNVC: 2
02413180KZ0147-39: RNCC: 5 | RNVC: 2

17 Sep 1985

5340-12-340-4125
Support Hook

123404125
E909665019: RNCC: 2 | RNVC: 2
E909665019: RNCC: 3 | RNVC: 2
909665019: RNCC: 5 | RNVC: 2

10 Apr 1996

5340-12-307-1582
Lock-Release Lever

123071582
4217765026: RNCC: 3 | RNVC: 2

15 May 1986

5340-12-337-1393
Spacing Threaded Standoff

123371393
52.9352.102.44: RNCC: 3 | RNVC: 2

24 Jan 1995

5340-12-010-8540

5340-12-346-1720
Mounting Bracket

123461720
10 0000 828: RNCC: 2 | RNVC: 2
10 0000 828: RNCC: 3 | RNVC: 2
10.0000.828: RNCC: 5 | RNVC: 2

22 Jun 1998

5340-12-354-1781
Angle Bracket

123541781
03886400: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-196-0816
Nonmetallic Bumper

121960816
81961010583: RNCC: 3 | RNVC: 2

25 May 1983

5340-12-339-1393
Mounting Bracket

123391393
10.41.090.00: RNCC: 3 | RNVC: 2
0008631614: RNCC: 3 | RNVC: 2
104109000: RNCC: 5 | RNVC: 9

16 Oct 1995

5340-12-340-3503
Lock Key

123403503
SCHLUESSEL: RNCC: 3 | RNVC: 2

28 Mar 1996

5340-12-351-4633
Angle Bracket

123514633
10063-620010: RNCC: 3 | RNVC: 2
10063-620010: RNCC: 5 | RNVC: 9

29 Jul 2000

5340-12-303-6422
Double Angle Bracket

123036422
5802017-707700.00: RNCC: 2 | RNVC: 2
5802017-707700.00: RNCC: 3 | RNVC: 2

17 Apr 1985

5340-12-353-4385
Spacing Threaded Standoff

123534385
231.09.12: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-12-179-5595
Nonmetallic Bumper

121795595
1204920482: RNCC: 3 | RNVC: 2

6 Jul 1979

5340-12-350-4688
Dust And Moisture Seal Protective Plug

123504688
9070.99.0027: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-373-1373
Spring Tension Clip

123731373
000000003588: RNCC: 3 | RNVC: 2

2 Oct 2007

5340-12-182-9767
Loop Clamp

121829767
LN9490BM6: RNCC: 2 | RNVC: 2

11 Mar 1980

5340-12-313-6026
Access Door

123136026
1081469: RNCC: 2 | RNVC: 2
1081469: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-12-366-9019
Blank Panel

123669019
591647277: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-384-3241
Bow Handle

123843241
3313.1003: RNCC: 3 | RNVC: 2

14 Feb 2011

5340-12-380-5967
Webbing Strap

123805967
08004178: RNCC: 3 | RNVC: 2

11 Nov 2009

5340-12-356-9018
Access Cover

123569018
074121121B: RNCC: 3 | RNVC: 9

15 Apr 2002

5340-12-351-5037
Access Cover

123515037
4616910327: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-181-1473
Electrical-Mechanical Equipment Post

121811473
6050902: RNCC: 3 | RNVC: 2

29 Oct 1979

5340-12-363-5725
Bow Handle

123635725
3008060182: RNCC: 3 | RNVC: 2

6 Jul 2004

5340-12-375-7699
Mounting Bracket

123757699
4004374: RNCC: 3 | RNVC: 2
4004374: RNCC: 5 | RNVC: 2

3 Jul 2008

5340-12-347-0029
Runner

123470029
CF 800 174 AE: RNCC: 2 | RNVC: 2
CF 800 174 AE: RNCC: 3 | RNVC: 2

12 Oct 1998

5340-12-332-6611
Mending Plate

123326611
81669122414: RNCC: 2 | RNVC: 2
81669122414: RNCC: 3 | RNVC: 2
81.66912.2414: RNCC: 5 | RNVC: 2

2 Sep 1993

5340-12-351-7618
Butt Hinge Leaf

123517618
T671M1045205: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-386-0204
Lock Bolt

123860204
9701670: RNCC: 3 | RNVC: 2

1 Aug 2011

5340-12-360-4666
Loop Clamp

123604666
EFP15004-2: RNCC: 3 | RNVC: 2

23 May 2003

5340-12-190-9241
Nonmetallic Bumper

121909241
2420026002: RNCC: 3 | RNVC: 2
8690740280: RNCC: 5 | RNVC: 2

23 Dec 1981

5340-12-094-6279

5340-12-133-5700

5340-12-339-7026
Access Cover

123397026
2500255-190000.005.0: RNCC: 2 | RNVC: 2
2500255-190000.005.0: RNCC: 3 | RNVC: 2
2500255-190000-005-0: RNCC: 5 | RNVC: 2

22 Dec 1995

5340-12-186-6962
Mounting Bracket

121866962
25704-194200.02.0: RNCC: 2 | RNVC: 2
25704-194200.02.0: RNCC: 3 | RNVC: 2
25704-194200-02-0: RNCC: 5 | RNVC: 2
25704-194200-02-0: RNCC: 5 | RNVC: 9
25704-194200.02.0: RNCC: 5 | RNVC: 9

28 Jan 1981

5340-12-367-9521
Block Clamp

123679521
DIN3015-LA-K3R-21,3-PP-W1: RNCC: 2 | RNVC: 2
RAPR-321,3: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-12-383-9502
Dust And Moisture Seal Boot

123839502
5.178-026.0: RNCC: 3 | RNVC: 2

28 Dec 2010

5340-12-373-8474
Double Angle Bracket

123738474
J21520088-405: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-12-388-9624
Genera Guide Rail

123889624
D0110911-001: RNCC: 3 | RNVC: 2

10 May 2012

5340-12-321-6383
Mounting Bracket

123216383
218750-2000: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-331-6334
Quick Release Plunger

123316334
2207.412: RNCC: 3 | RNVC: 2
2207-212: RNCC: 5 | RNVC: 9
2207.212: RNCC: 5 | RNVC: 9

2 Jun 1993

Load More Results