What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 37 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 37 of 178

5340-12-340-8638
Mounting Plate

123408638
912140-4000: RNCC: 3 | RNVC: 2
(241)A39630-119403: RNCC: 5 | RNVC: 2
(241)A396300119403: RNCC: 5 | RNVC: 2
00119403: RNCC: 5 | RNVC: 2
81423900150: RNCC: 5 | RNVC: 2
9121404000: RNCC: 5 | RNVC: 2
0-119403: RNCC: 8 | RNVC: 2

25 Jun 1996

5340-12-306-1070
Nonmetallic Bumper

123061070
P-525426-015: RNCC: 3 | RNVC: 2
P525426-015: RNCC: 5 | RNVC: 2

28 Jan 1986

5340-12-379-8501
Multiple Angle Bracket

123798501
SK1121-187701.001.0: RNCC: 3 | RNVC: 2

8 Sep 2009

5340-12-348-3109
Nonmetallic Bumper

123483109
83786144: RNCC: 3 | RNVC: 2

27 May 1999

5340-12-338-4178
Double Angle Bracket

123384178
5802017-713620.02: RNCC: 2 | RNVC: 2
5802017-713620.02: RNCC: 3 | RNVC: 2

6 Jul 1995

5340-12-340-1118
Permanent Magnet

123401118
6731086: RNCC: 3 | RNVC: 2
673 10 86: RNCC: 5 | RNVC: 2

28 Feb 1996

5340-12-377-1667
Retaining Band

123771667
41271918: RNCC: 3 | RNVC: 2
41271918: RNCC: 5 | RNVC: 2

15 Dec 2008

5340-12-126-5208
Compression Cup

121265208
1608A2417: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-041-1319

5340-12-158-6145
Resilient Mount

121586145
48686.NR55.ST: RNCC: 3 | RNVC: 2
48686FLCN5590: RNCC: 3 | RNVC: 2
48686,FLCN5590: RNCC: 5 | RNVC: 2
48686SM550: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-168-2783
Loop Clamp

121682783
LN9491B4: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-300-7259
Access Cover

123007259
5502340033: RNCC: 3 | RNVC: 2
5502340033: RNCC: 5 | RNVC: 2
5502340033: RNCC: 5 | RNVC: 2

25 Aug 1984

5340-12-190-4049
Rod End Clevis

121904049
01TC60642G01: RNCC: 3 | RNVC: 2

25 Nov 1981

5340-12-384-7502
Dust And Moisture Seal Protective Cover

123847502
WTG100317: RNCC: 3 | RNVC: 2

25 Mar 2011

5340-12-043-9890

5340-12-042-5771

5340-12-394-0380
Section Block Clamp

123940380
06.66012-1155: RNCC: 3 | RNVC: 2
06.66012-1155: RNCC: 5 | RNVC: 2

31 Oct 2013

5340-12-021-7911

5340-12-340-5459
Mounting Bracket

123405459
5900901941: RNCC: 3 | RNVC: 2
590 090 19 41: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-311-2818
Resilient Mount

123112818
46712303068: RNCC: 3 | RNVC: 9

12 Aug 1987

5340-12-314-8495
Mounting Bracket

123148495
1345870: RNCC: 3 | RNVC: 2

17 Aug 1988

5340-12-314-1616
Angle Bracket

123141616
6214200086: RNCC: 3 | RNVC: 2
621 420 00 86: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-12-344-6422

5340-12-320-1178
Manual Control Lever

123201178
6116001: RNCC: 3 | RNVC: 2

8 Dec 1989

5340-12-319-5627
Angle Bracket

123195627
731.42.202: RNCC: 3 | RNVC: 2
V731.42.202: RNCC: 5 | RNVC: 2

13 Oct 1989

5340-12-351-5934
Mechanical Stop

123515934
7802497004: RNCC: 3 | RNVC: 2
78024 97004: RNCC: 5 | RNVC: 9

7 Aug 2000

5340-12-313-2532
Handrail Bracket

123132532
200498: RNCC: 3 | RNVC: 2
23K26 0008 00.H01: RNCC: 5 | RNVC: 2

16 Mar 1988

5340-12-360-8918
Mounting Bracket

123608918
P70162400001: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-373-3990
Lock-Release Lever

123733990
02.635.00.0000: RNCC: 3 | RNVC: 2

29 Oct 2007

5340-12-312-1332
Nonmetallic Bumper

123121332
81.96210.0306: RNCC: 3 | RNVC: 2
600899425: RNCC: 3 | RNVC: 2
81962100306: RNCC: 5 | RNVC: 2

25 Nov 1987

5340-12-175-9084
Manual Control Handle

121759084
DIN99-L80: RNCC: 2 | RNVC: 2
C13X10DIN99: RNCC: 5 | RNVC: 2
L80DIN99: RNCC: 5 | RNVC: 2

25 Oct 1978

5340-12-360-8934
Bail Handle

123608934
15725502: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-301-5472
Angle Bracket

123015472
2300106-250300.02: RNCC: 2 | RNVC: 2
2300106-250300.02: RNCC: 3 | RNVC: 2
2300106-250300.02: RNCC: 5 | RNVC: 9
2300106-250300.02: RNCC: 5 | RNVC: 9

24 Oct 1984

5340-12-327-0571
Mending Plate

123270571
2500171-464000.01: RNCC: 2 | RNVC: 2
2500171-464000.01: RNCC: 3 | RNVC: 2
2500171-464000.01: RNCC: 5 | RNVC: 9

26 Nov 1991

5340-12-349-4966
Retaining Clip

123494966
105: RNCC: 3 | RNVC: 2

23 Nov 1999

5340-12-311-8980
Dust And Moisture Seal Protective Cap

123118980
166034: RNCC: 2 | RNVC: 2
166034: RNCC: 3 | RNVC: 2

28 Oct 1987

5340-12-183-7739
Sicherheits Schlosz

121837739
411823509: RNCC: 3 | RNVC: 2

20 May 1980

5340-12-392-2876
Ball Stud Holder

123922876
7000118: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-122-6355
Hasp Staple

121226355
4047780032: RNCC: 3 | RNVC: 2
624041072900: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-380-4814
Dust And Moisture Seal Protective Plug

123804814
P131500: RNCC: 3 | RNVC: 2

3 Nov 2009

5340-12-326-3987
Mending Plate

123263987
272.346 195: RNCC: 2 | RNVC: 2
272.346.195: RNCC: 3 | RNVC: 2
272.346 195: RNCC: 5 | RNVC: 9

11 Sep 1991

5340-12-170-2498
Retaining Strap

121702498
PAN4231DEE5222: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-301-9950
Catch Strike

123019950
3816200167: RNCC: 3 | RNVC: 2

24 Nov 1984

5340-12-154-6110
Retaining Strap

121546110
111G08009: RNCC: 3 | RNVC: 2
111G08009E1: RNCC: 5 | RNVC: 2
111G08009: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-307-4225
Catch Strike

123074225
2996.65.55: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-12-182-7376
Mounting Bracket

121827376
2459101: RNCC: 3 | RNVC: 2

22 Feb 1980

5340-12-334-8776
Nut And Bolt Locking Plate

123348776
5840980173: RNCC: 3 | RNVC: 2
584 098 01 73: RNCC: 5 | RNVC: 2

30 Jun 1994

5340-12-321-6547
Access Cover

123216547
7673 002 110: RNCC: 3 | RNVC: 2
7673 002 110: RNCC: 5 | RNVC: 2
100CP2863: RNCC: 5 | RNVC: 2
0004666505: RNCC: 5 | RNVC: 2
7673002110: RNCC: 5 | RNVC: 2
7673002110: RNCC: 5 | RNVC: 9

12 Jun 1990

5340-12-041-0045

5340-12-130-1978

5340-12-324-8016
Expansion Shield

123248016
2500171-450000.02: RNCC: 2 | RNVC: 2
2500171-450000.02: RNCC: 3 | RNVC: 2

25 Mar 1991

5340-12-358-0905
Manual Control Lever

123580905
1948059K14: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-12-306-4855
Sliding Stay

123064855
593A954: RNCC: 3 | RNVC: 2
140-2225: RNCC: 5 | RNVC: 2
2AF025: RNCC: 5 | RNVC: 2
140-2225: RNCC: 5 | RNVC: 9

4 Mar 1986

5340-12-347-0999
Mending Plate

123470999
2300421-330013.003: RNCC: 2 | RNVC: 2
9919693: RNCC: 3 | RNVC: 2
2300421-330013.003: RNCC: 5 | RNVC: 2
9919693: RNCC: 5 | RNVC: 9
2300421-330013.003: RNCC: 5 | RNVC: 9

27 Oct 1998

5340-12-329-7487
Runner

123297487
2300248-80420.01: RNCC: 2 | RNVC: 2
2300248-80420.01: RNCC: 3 | RNVC: 2
2300248-80420.01: RNCC: 5 | RNVC: 2

23 Sep 1992

5340-12-322-5730
Angle Bracket

123225730
42010663: RNCC: 3 | RNVC: 2

3 Sep 1990

5340-12-371-7245
Manual Control Lever

123717245
2145706: RNCC: 3 | RNVC: 2
7KK210: RNCC: 5 | RNVC: 2

9 May 2007

5340-12-360-4769
Manual Control Lever

123604769
82003009: RNCC: 3 | RNVC: 2
82003009: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-340-2443
Mounting Bracket

123402443
463-630730.000: RNCC: 3 | RNVC: 9
9892454: RNCC: 5 | RNVC: 9

19 Mar 1996

5340-12-352-2634
Access Cover

123522634
5205058: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-12-328-9651
Access Cover

123289651
245827023D: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-323-9488
Friction Catch

123239488
40 0165 755: RNCC: 2 | RNVC: 2
40 0165 755: RNCC: 3 | RNVC: 2
40 0165 755: RNCC: 5 | RNVC: 9

10 Jan 1991

5340-12-334-5643
Angle Bracket

123345643
105-20471: RNCC: 3 | RNVC: 2

25 May 1994

5340-12-366-9842
Mounting Bracket

123669842
T341M1037205: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-326-6030
Retaining Strap

123266030
2300013-7130.00: RNCC: 2 | RNVC: 2
2300013.7130.00: RNCC: 3 | RNVC: 2
2300013.7130.00: RNCC: 5 | RNVC: 9

11 Oct 1991

5340-12-194-0385
Rod End Clevis

121940385
2300127-123010.000.0: RNCC: 2 | RNVC: 2
323985: RNCC: 3 | RNVC: 2
2300127-123010.000.0: RNCC: 5 | RNVC: 2
2300127-123010.000.0: RNCC: 5 | RNVC: 2
2300127-123010.000.0: RNCC: 5 | RNVC: 9

27 Sep 1982

5340-12-177-5414
Loop Clamp

121775414
DIN3016-1-D2-22-32X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-22-32X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1.22-32/20: RNCC: 3 | RNVC: 2
RSGU1100-22-32-20: RNCC: 5 | RNVC: 2
RSGU1100.22-32/20: RNCC: 5 | RNVC: 2
0009951305: RNCC: 5 | RNVC: 2
4219115022: RNCC: 5 | RNVC: 2
DIN3016-D2-22-32X20-W1-2: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-183-2545
Electrical-Mechanical Equipment Post

121832545
VG95148A10XM3X39,5-NRST: RNCC: 2 | RNVC: 2
VG95148A10XM3X39,5-NRST: RNCC: 3 | RNVC: 2
56-0049-200-09: RNCC: 3 | RNVC: 2

28 Mar 1980

5340-12-192-9271
Lock-Release Lever

121929271
02-0899-181960.00.0: RNCC: 3 | RNVC: 2
02-0899-181960-00-0: RNCC: 5 | RNVC: 2

7 Jun 1982

5340-12-339-0096
Hinge Torsion Bar

123390096
8.1512-11: RNCC: 3 | RNVC: 2

26 Sep 1995

5340-12-394-4401
Helical Compression Spring Seat

123944401
07-24-032-18-03: RNCC: 3 | RNVC: 2
H05713: RNCC: 5 | RNVC: 2

3 Dec 2013

5340-12-130-4657

5340-12-130-1143

5340-12-341-4136
Elastic Strap

123414136
P04509: RNCC: 3 | RNVC: 2
P 04 509: RNCC: 5 | RNVC: 2

3 Sep 1996

5340-12-339-7218
Handle Grip

123397218
N 0611-VERZINKT: RNCC: 3 | RNVC: 2
DGAC013: RNCC: 5 | RNVC: 2

4 Jan 1996

5340-12-309-4054
Mending Plate

123094054
WW 426 501 A: RNCC: 2 | RNVC: 2
WW 426 501 A: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-360-1420
Dust And Moisture Seal Protective Plug

123601420
735M16X1,5: RNCC: 3 | RNVC: 2
GPN735M16X1,5: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-12-168-1614
Retaining Strap

121681614
WW410667A: RNCC: 3 | RNVC: 2
WW410667A: RNCC: 5 | RNVC: 2
WW 410 667 A: RNCC: 5 | RNVC: 2
WW410667A: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-188-7169
Mending Plate

121887169
81637310109: RNCC: 3 | RNVC: 2
430-5: RNCC: 5 | RNVC: 9

27 Jul 1981

5340-12-316-9131
Access Cover

123169131
SP21651: RNCC: 3 | RNVC: 2
96.4.718.0005: RNCC: 5 | RNVC: 9

22 Feb 1989

5340-12-318-3473
Rim Latch

123183473
9115.005.4: RNCC: 3 | RNVC: 2

6 Jul 1989

5340-12-183-9054
Loop Clamp

121839054
2107031: RNCC: 3 | RNVC: 9

29 May 1980

5340-12-180-6336
Mending Plate

121806336
C381-A28-C85: RNCC: 2 | RNVC: 2
C381A28C85: RNCC: 3 | RNVC: 2
C381A28C85: RNCC: 5 | RNVC: 2
C381-A28-C85: RNCC: 5 | RNVC: 2
C381-A28-C85: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-131-1173
Retaining Strap

121311173
DIN72571-1X18-ST-GESCHWAERZT: RNCC: 2 | RNVC: 2
DIN72571-1X18-ST-GESCHWAERZT: RNCC: 3 | RNVC: 2
1X18DIN72571-ST-GESCHWAERZT: RNCC: 5 | RNVC: 2
1X18DIN72571STGESCHWAERZT: RNCC: 5 | RNVC: 2
1X18DIN72571STSWGEBR: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-394-3814
Bumper

123943814
GN352-20-10-M6-S-40: RNCC: 3 | RNVC: 2

27 Nov 2013

5340-12-372-7902
Loop Clamp

123727902
DIN3016-1-D2-12-12X20-W1-2-NBR: RNCC: 2 | RNVC: 2

21 Aug 2007

5340-12-703-2099
Angle Bracket

127032099
VG95211-ML-127032099: RNCC: 2 | RNVC: 2
5.12.6185.0170.00: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-365-1719
Access Cover

123651719
5981-184920.000.0: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-300-8525
Angle Bracket

123008525
1300062-100000.06: RNCC: 2 | RNVC: 2
7834672: RNCC: 3 | RNVC: 2
7834-672: RNCC: 5 | RNVC: 2

5 Sep 1984

5340-12-342-6189
Mounting Bracket

123426189
0001-163010-000-0: RNCC: 3 | RNVC: 2
0001-163010-000-0: RNCC: 5 | RNVC: 9

7 Mar 1997

5340-12-179-1283
Retaining Strap

121791283
5801215-57-001: RNCC: 3 | RNVC: 2
5801215-57.001: RNCC: 5 | RNVC: 2

8 Jun 1979

5340-12-702-1366
Mounting Bracket

127021366
VG95211-ML-127021366: RNCC: 2 | RNVC: 2
30.5850.6: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-199-1807
Lock-Release Lever

121991807
P-896383-011: RNCC: 3 | RNVC: 2
P896383-011: RNCC: 5 | RNVC: 2

3 Apr 1984

5340-12-701-4550
Loop Clamp

127014550
VG95211-ML-127014550: RNCC: 2 | RNVC: 2
5.12.5314.1000.97: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-191-8024
Sealing Plug Assembly

121918024
VA5-43-315: RNCC: 3 | RNVC: 2
0005420490: RNCC: 5 | RNVC: 2
721 1 20 022 0: RNCC: 5 | RNVC: 9
VA5-43-315: RNCC: 5 | RNVC: 9

8 Mar 1982

5340-12-321-4877
Mending Plate

123214877
702-183130-908-0: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-349-9568
Retaining Strap

123499568
2500238-070210.001.0: RNCC: 2 | RNVC: 2
2500238-070210.001.0: RNCC: 3 | RNVC: 2

31 Jan 2000

5340-12-328-9554
Electrical-Mechanical Equipment Post

123289554
VG95148B5,5XM3X15-2.0380.30-E2A: RNCC: 2 | RNVC: 2
5.03.153: RNCC: 3 | RNVC: 2
VG95148B5,5XM3X15-2.0380.30-E2A: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-333-3540
Access Cover

123333540
702-438000-909-0: RNCC: 3 | RNVC: 2

6 Dec 1993

5340-12-316-6489
Butt Hinge

123166489
016/010000-086.0: RNCC: 3 | RNVC: 2

31 Jan 1989

5340-12-354-8995
Loop Clamp

123548995
DIN3016-2-G1-66X20-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-G1-66X20-W5: RNCC: 5 | RNVC: 9
VG95931-G66X20-W5: RNCC: 5 | RNVC: 9

4 Sep 2001

5340-12-313-3437
Helical Compression Spring Seat

123133437
126-45012-0027B POS.33: RNCC: 3 | RNVC: 2
L26-45012-0027-2 POS.33: RNCC: 5 | RNVC: 2
126-45012-0027BPOS33: RNCC: 5 | RNVC: 2

23 Mar 1988

5340-12-141-6466
Loop Clamp

121416466
RSIM60-16/9: RNCC: 3 | RNVC: 2
4417001060: RNCC: 5 | RNVC: 2
0009950336: RNCC: 5 | RNVC: 2
RSIM60-16-9: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-354-8266
Mending Plate

123548266
P-876146-403: RNCC: 3 | RNVC: 2
P876146-403: RNCC: 5 | RNVC: 2

29 Aug 2001

5340-12-360-3775
Loop Clamp

123603775
RAN2-428: RNCC: 3 | RNVC: 2

15 May 2003

5340-12-326-4292
Loop Clamp

123264292
DIN3016-1-D2-8-8-8X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-8-8-8X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.3X8/15: RNCC: 3 | RNVC: 2
RSGU1.3X8/15-W1: RNCC: 5 | RNVC: 2
0558907: RNCC: 5 | RNVC: 2
DIN3016-D2-8-8-8X15-W1-2: RNCC: 5 | RNVC: 9

13 Sep 1991

5340-12-359-7995
Retaining Bail

123597995
81122014148: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-136-0607

5340-12-188-0130
Wood Runner

121880130
2612001: RNCC: 3 | RNVC: 2

27 May 1981

5340-12-377-3727
Expansion Shield

123773727
0009888425: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-391-4757
Retaining Strap

123914757
I010128: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-358-7934
Dust And Moisture Seal Protective Cap-Plug

123587934
6302147: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-360-9077
Angle Bracket

123609077
64414184: RNCC: 3 | RNVC: 2

23 Jul 2003

5340-12-391-6879
Dust And Moisture Seal Protective Cap-Plug

123916879
380.561226: RNCC: 3 | RNVC: 2

27 Mar 2013

5340-12-011-5788

5340-12-011-4963

5340-12-339-1566
Nonmetallic Bumper

123391566
17 111 150 984: RNCC: 2 | RNVC: 2
17 111 150 984: RNCC: 3 | RNVC: 2
17 111 150 984: RNCC: 5 | RNVC: 2
17 111 150 984: RNCC: 5 | RNVC: 2

19 Oct 1995

5340-12-352-0834
Kunst Gleitschiene

123520834
2995.06.81: RNCC: 2 | RNVC: 2
2995.06.81: RNCC: 3 | RNVC: 2

16 Oct 2000

5340-12-356-1484
Angle Bracket

123561484
4617150412: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-384-6027
Rim Latch

123846027
631801: RNCC: 3 | RNVC: 2

11 Mar 2011

5340-12-371-3670
Helical Compression Spring Seat

123713670
R900108248: RNCC: 3 | RNVC: 2
108248: RNCC: 5 | RNVC: 2

21 Mar 2007

5340-12-128-3843

5340-12-328-2477
Nut And Bolt Locking Plate

123282477
002618: RNCC: 3 | RNVC: 2
002618: RNCC: 5 | RNVC: 9

28 Apr 1992

5340-12-326-6146
Dust And Moisture Seal Boot

123266146
6010940391: RNCC: 3 | RNVC: 2

15 Oct 1991

5340-12-368-4624
Metal Grille

123684624
5590180265: RNCC: 3 | RNVC: 2

14 Mar 2006

5340-12-376-4605
Extension Drawer Slide

123764605
9BEU10279-ASK: RNCC: 3 | RNVC: 2

1 Oct 2008

5340-12-163-5663
Loop Clamp

121635663
LN9490B6: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-356-7553
Retaining Strap

123567553
028014719: RNCC: 3 | RNVC: 2
028014719: RNCC: 5 | RNVC: 9

3 Apr 2002

5340-12-336-2848
Access Cover

123362848
4620 337 033: RNCC: 3 | RNVC: 2
4620337033: RNCC: 5 | RNVC: 9

7 Nov 1994

5340-12-331-8610
Access Cover

123318610
10143201: RNCC: 3 | RNVC: 2
EZ101432: RNCC: 5 | RNVC: 2

29 Jun 1993

5340-12-333-7107
Lock-Release Lever

123337107
15 0004 387: RNCC: 2 | RNVC: 2
15 0004 387: RNCC: 3 | RNVC: 2
150004387: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-12-387-9284
Loop Clamp

123879284
7093732: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-325-3677
Nonmetallic Bumper

123253677
019965: RNCC: 3 | RNVC: 2

29 May 1991

5340-12-375-2676
Access Cover

123752676
04902312: RNCC: 3 | RNVC: 2
7420795655: RNCC: 5 | RNVC: 2

13 May 2008

5340-12-328-9784
Sealing Plug Assembly

123289784
035103379: RNCC: 3 | RNVC: 2
035103379: RNCC: 5 | RNVC: 2

4 Jul 1992

5340-12-309-5865
Mending Plate

123095865
5126626: RNCC: 3 | RNVC: 2

5 Feb 1987

5340-12-166-3583
Dust And Moisture Seal Protective Cap

121663583
0123 7035: RNCC: 3 | RNVC: 2
1237035EE8943-17: RNCC: 5 | RNVC: 2
N92063L2: RNCC: 5 | RNVC: 2
1237035: RNCC: 5 | RNVC: 2
1237035: RNCC: 5 | RNVC: 2
1237035: RNCC: 5 | RNVC: 9

31 Aug 1976

5340-12-340-2646
Access Cover

123402646
9522655: RNCC: 2 | RNVC: 2
9522655: RNCC: 3 | RNVC: 2

20 Mar 1996

5340-12-176-1938
Loop Clamp

121761938
PAN4231M3434: RNCC: 3 | RNVC: 2

13 Nov 1978

5340-12-335-2711
Turnbuckle

123352711
54324: RNCC: 3 | RNVC: 2
M21771/ZU1: RNCC: 5 | RNVC: 2

2 Aug 1994

5340-12-318-5724
Mending Plate

123185724
4585001: RNCC: 3 | RNVC: 2

28 Jul 1989

5340-12-306-8624
Mending Plate

123068624
CF 807 711 AE: RNCC: 3 | RNVC: 2
CF 807 711 AE: RNCC: 5 | RNVC: 2

10 Apr 1986

5340-12-306-5697
Angle Bracket

123065697
3874926041: RNCC: 3 | RNVC: 2

11 Mar 1986

5340-12-351-4632
Angle Bracket

123514632
10063-621010: RNCC: 3 | RNVC: 2
10063-621010: RNCC: 5 | RNVC: 9

29 Jul 2000

5340-12-377-4670
Shimmy Damper

123774670
XP53238100018: RNCC: 3 | RNVC: 2

19 Jan 2009

5340-12-317-2005
Angle Bracket

123172005
81394400025: RNCC: 3 | RNVC: 2
81.39440.0025: RNCC: 5 | RNVC: 2

16 Mar 1989

5340-12-181-2461
Rigid Caster

121812461
1410300092: RNCC: 3 | RNVC: 2

5 Nov 1979

5340-12-312-4347
Swivel Caster

123124347
367H32C150BZGD: RNCC: 3 | RNVC: 2

6 Jan 1988

5340-12-353-5399
Mounting Bracket

123535399
2995.23.39: RNCC: 3 | RNVC: 2

5 Apr 2001

5340-12-360-2992
Loop Clamp

123602992
0009550849: RNCC: 3 | RNVC: 2
0009550849: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-353-5455
Section Block Clamp

123535455
JN0413FJ46: RNCC: 3 | RNVC: 2

5 Apr 2001

5340-12-091-2524

5340-12-197-0635
Rubber Bumper

121970635
251501191: RNCC: 3 | RNVC: 9

14 Sep 1983

5340-12-176-2401
Detent Plunger

121762401
CF418019AU: RNCC: 3 | RNVC: 2
536056-8218.000: RNCC: 3 | RNVC: 2
CF 418 019 AU: RNCC: 5 | RNVC: 2
CF418019AU: RNCC: 5 | RNVC: 2
CF 418 019 AU: RNCC: 5 | RNVC: 2
CF 418 019 AU: RNCC: 5 | RNVC: 2
CF418019AU: RNCC: 5 | RNVC: 2
536056-8218.000: RNCC: 5 | RNVC: 9

15 Nov 1978

5340-12-174-6647
Dust And Moisture Seal Protective Cap

121746647
41179: RNCC: 3 | RNVC: 2

19 Jul 1978

5340-12-316-2952
Rod End Clevis

123162952
5186304: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-163-7400
Loop Clamp

121637400
LN9491BM8: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-198-6679
Lock-Release Lever

121986679
27 0318 203: RNCC: 2 | RNVC: 2
9859902: RNCC: 3 | RNVC: 9
27 0318 203: RNCC: 5 | RNVC: 2
270318203: RNCC: 5 | RNVC: 9
27 0318 203: RNCC: 5 | RNVC: 9

17 Feb 1984

5340-12-198-3470
Catch Strike

121983470
3226880087: RNCC: 3 | RNVC: 2

18 Jan 1984

5340-12-348-9109
Dust And Moisture Seal Protective Plug

123489109
245/9713-04-00-02: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-173-1674
Mending Plate

121731674
5800828-1331-004: RNCC: 3 | RNVC: 2
5800828-1331.004: RNCC: 5 | RNVC: 2
5800828-1331-004: RNCC: 5 | RNVC: 9

22 Mar 1978

5340-12-338-2350
Turnbuckle

123382350
7101995: RNCC: 3 | RNVC: 2
M21807/P-1 LFD.NR.1: RNCC: 5 | RNVC: 2

8 Jun 1995

5340-12-345-9059
Mounting Bracket

123459059
KB-68517-655: RNCC: 3 | RNVC: 2
68517-655: RNCC: 5 | RNVC: 2

14 May 1998

5340-12-321-7049
Metal Runner

123217049
702-141400-903-0: RNCC: 3 | RNVC: 2

18 Jun 1990

5340-12-314-7690
Dust And Moisture Seal Protective Cap

123147690
NO PRIMARY REF 12-314-7690: RNCC: 3 | RNVC: 2
2600051: RNCC: 5 | RNVC: 9

9 Aug 1988

5340-12-303-9318
Plug Button

123039318
200422: RNCC: 3 | RNVC: 2
24K03-0084-00.005: RNCC: 5 | RNVC: 2

21 May 1985

5340-12-365-1500
Mounting Plate

123651500
2500075-199600-001-0: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-381-0720
Turnbuckle

123810720
5700010V: RNCC: 3 | RNVC: 2

7 Jan 2010

5340-12-385-4637
Mounting Bracket

123854637
5500780741: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-12-380-5167
Flush Lock

123805167
2470050: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-12-313-9028
Loop Clamp

123139028
0121 6747: RNCC: 3 | RNVC: 2
01216747EF8932-23: RNCC: 5 | RNVC: 2

18 May 1988

5340-12-365-1531
Spring Tension Clip

123651531
4639940848: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-333-8336
Access Door

123338336
53.1622.537.00: RNCC: 3 | RNVC: 2

16 Feb 1994

5340-12-382-6019
Elastic Strap

123826019
J KURZ-ZG1-0500: RNCC: 3 | RNVC: 2

15 Jul 2010

5340-12-187-7485
Bow Handle

121877485
3.61.120.0: RNCC: 3 | RNVC: 2
3-61-120-0: RNCC: 5 | RNVC: 2

4 May 1981

5340-12-186-0398
Hebel

121860398
23176-148300.00.0: RNCC: 2 | RNVC: 2
23176-148300-00-0: RNCC: 5 | RNVC: 2
23176-148300-00-0: RNCC: 5 | RNVC: 9

25 Nov 1980

5340-12-167-3488
Handle Grip

121673488
100332-17100.04: RNCC: 2 | RNVC: 2
100332-17100-04: RNCC: 5 | RNVC: 2
100332-17100.04: RNCC: 5 | RNVC: 2
100332-17100-04: RNCC: 5 | RNVC: 9

16 Dec 1976

5340-12-314-1059
Angle Bracket

123141059
E-4782-01-21: RNCC: 3 | RNVC: 2
E4782-01-21: RNCC: 5 | RNVC: 2

8 Jun 1988

5340-12-145-7957
Retaining Strap

121457957
1212 5315: RNCC: 3 | RNVC: 2
30.3230-08.4: RNCC: 3 | RNVC: 9
12125315: RNCC: 5 | RNVC: 2
30.3230-08.4: RNCC: 5 | RNVC: 2
30-3230-08-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-7057
Metal Runner

123217057
702-244100-901-0: RNCC: 3 | RNVC: 2

18 Jun 1990

5340-12-195-2320
Loop Clamp

121952320
DIN3016-1-A1-54X15-W1-2: RNCC: 2 | RNVC: 2
RS1.54/15: RNCC: 3 | RNVC: 2
DIN3016-A1-54X15-W1-2: RNCC: 3 | RNVC: 2
RS1100.54/15: RNCC: 5 | RNVC: 2
4110015054: RNCC: 5 | RNVC: 2
VG95931-A54X15-W1: RNCC: 5 | RNVC: 9
DIN3016-A1-54X15-W1-2: RNCC: 5 | RNVC: 9

27 Jan 1983

5340-12-344-4229
Mounting Bracket

123444229
A-616743-023: RNCC: 3 | RNVC: 2
A616743-023: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-310-1375
Resilient Mount

123101375
50X30-M10X33-10MMBOHRUNG.CR53.ST: RNCC: 3 | RNVC: 2
6.339-013: RNCC: 5 | RNVC: 2
811.010.6.339-013.CR53.ST: RNCC: 5 | RNVC: 2
81110-6.339-013.CR53.ST: RNCC: 5 | RNVC: 2
6.339-013.0: RNCC: 5 | RNVC: 2
6.339-013: RNCC: 5 | RNVC: 9

10 Apr 1987

5340-12-701-5187
Mounting Plate

127015187
VG95211-ML-127015187: RNCC: 2 | RNVC: 2
5.12.6100.3560.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6684
Mounting Bracket

127016684
VG95211-ML-127016684: RNCC: 2 | RNVC: 2
5.12.7211.0360.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-178-1224
Dust And Moisture Seal Protective Cap

121781224
30-79501-0057: RNCC: 3 | RNVC: 2

22 Mar 1979

5340-12-309-9368
Mending Plate

123099368
E32-821000A21B: RNCC: 3 | RNVC: 2

20 Mar 1987

5340-12-136-8237
Expansion Plug

121368237
DIN470-32-ST-BL: RNCC: 2 | RNVC: 2
000470032000: RNCC: 5 | RNVC: 2
32DIN470: RNCC: 5 | RNVC: 2
32DIN470R0H: RNCC: 5 | RNVC: 2
991580002: RNCC: 5 | RNVC: 9
991580002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-360-3495
Angle Bracket

123603495
3515841008: RNCC: 3 | RNVC: 2
3515841008: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-324-6436
Webbing Strap

123246436
54.0024.405.00: RNCC: 2 | RNVC: 2
54.0024.405.00: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-12-325-2079
Protection Bellows

123252079
6735280091: RNCC: 3 | RNVC: 2

16 May 1991

5340-12-352-0520
Spacing Threaded Standoff

123520520
54.0056.005.06: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-12-310-8911
Mounting Bracket

123108911
03584801: RNCC: 3 | RNVC: 2

7 Jul 1987

5340-12-315-0207
Mounting Bracket

123150207
66.3514.000.05-A001: RNCC: 3 | RNVC: 2
304985: RNCC: 5 | RNVC: 2

8 Sep 1988

5340-12-320-6595
Retaining Strap

123206595
46712302080: RNCC: 3 | RNVC: 2
2302080: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-312-7926
Access Cover

123127926
1070160: RNCC: 2 | RNVC: 2
1070160: RNCC: 3 | RNVC: 2

5 Feb 1988

5340-12-353-8850
Recess Handle

123538850
209417: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-365-8670
Angle Bracket

123658670
05183100: RNCC: 3 | RNVC: 2

15 Feb 2005

5340-12-131-5488

5340-12-025-0826

5340-12-305-5993
Retaining Strap

123055993
4409950232: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-360-3513
Turnbuckle

123603513
0009362616: RNCC: 3 | RNVC: 2
0009362616: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-372-5141
Door Holder

123725141
S167.95: RNCC: 3 | RNVC: 2
10014013: RNCC: 5 | RNVC: 2

24 Jul 2007

5340-12-308-7104
Dust And Moisture Seal Protective Cap

123087104
105726: RNCC: 3 | RNVC: 2

10 Nov 1986

5340-12-174-0433
Dust And Moisture Seal Protective Cap

121740433
204067: RNCC: 3 | RNVC: 2
50022437: RNCC: 5 | RNVC: 2
50022437: RNCC: 5 | RNVC: 9

31 May 1978

5340-12-163-7397
Loop Clamp

121637397
LN9491B16: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-311-4465
Pad Eye

123114465
JJ46489: RNCC: 3 | RNVC: 2

3 Sep 1987

5340-12-344-0500
Metallic Solid Wheel

123440500
2996.73.45: RNCC: 3 | RNVC: 2
2996.7345: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-093-6628

5340-12-195-2003
Dust And Moisture Seal Protective Cap

121952003
CU 403 513 B: RNCC: 2 | RNVC: 2
CU 403 513 B: RNCC: 3 | RNVC: 2
CU 403 513 B: RNCC: 5 | RNVC: 2
CU403513B: RNCC: 5 | RNVC: 2
CU403513B: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-12-178-8999
Mounting Bracket

121788999
CF 437 710 A: RNCC: 3 | RNVC: 2
CF 437 710 A: RNCC: 5 | RNVC: 2
CF437710A: RNCC: 5 | RNVC: 2
CF 437 710 A: RNCC: 5 | RNVC: 2
CF437710A: RNCC: 5 | RNVC: 2
CF437710A: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-367-4661
Mounting Bracket

123674661
BD5.250.766.230: RNCC: 3 | RNVC: 2

24 Aug 2005

5340-12-333-1238
Spacing Threaded Standoff

123331238
809319.5: RNCC: 3 | RNVC: 2
809319.5: RNCC: 5 | RNVC: 2

2 Nov 1993

5340-12-321-1492
Mounting Bracket

123211492
4990006: RNCC: 3 | RNVC: 2

3 Apr 1990

5340-12-348-0566
Helical Compression Spring Seat

123480566
138 766 84: RNCC: 3 | RNVC: 2

6 Apr 1999

5340-12-179-2447
Mounting Plate

121792447
2483101: RNCC: 2 | RNVC: 2
2483101: RNCC: 5 | RNVC: 2

18 Jun 1979

5340-12-375-4518
Mounting Bracket

123754518
1520789: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-12-185-2034
Spring Window Bolt

121852034
CF 407 635 AX: RNCC: 3 | RNVC: 2
CF4076350X: RNCC: 5 | RNVC: 2
CF 407 635 AX: RNCC: 5 | RNVC: 2
CF407635AX: RNCC: 5 | RNVC: 2
CF4076350X: RNCC: 5 | RNVC: 2
CF407635AX: RNCC: 5 | RNVC: 2

20 Sep 1980

5340-12-371-5418
Retaining Clip

123715418
T881M4032214: RNCC: 2 | RNVC: 2
T881M4032214: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-12-020-7361

5340-12-157-1837

5340-12-027-9824

5340-12-301-2384
Lock-Release Lever

123012384
4179195: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-180-5615
Cremone Bolt

121805615
01242018: RNCC: 3 | RNVC: 2
1242018EZ8935-37: RNCC: 5 | RNVC: 2
N92315V: RNCC: 5 | RNVC: 2
01242018: RNCC: 5 | RNVC: 2

19 Sep 1979

5340-12-317-0501
Helical Compression Spring Seat

123170501
3124231089: RNCC: 3 | RNVC: 2

7 Mar 1989

5340-12-385-2716
Dust And Moisture Seal Protective Cap-Plug

123852716
34774386: RNCC: 3 | RNVC: 2
34774386: RNCC: 5 | RNVC: 2

16 May 2011

5340-12-189-1654
Spring Tension Clip

121891654
8416: RNCC: 3 | RNVC: 2

7 Sep 1981

5340-12-181-1990
Bow Handle

121811990
5810020: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-12-374-4127
Loop Clamp

123744127
5581896: RNCC: 2 | RNVC: 2
5581896: RNCC: 3 | RNVC: 2

14 Feb 2008

5340-12-311-8820
Quick Release Plunger

123118820
2300074-5533.00: RNCC: 2 | RNVC: 2
2300074-5533.00: RNCC: 3 | RNVC: 2
2300074-5533.00: RNCC: 5 | RNVC: 9

27 Oct 1987

5340-12-319-3316
Handle Grip

123193316
020127: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-12-365-1543
Spring Tension Clip

123651543
81 637.691: RNCC: 3 | RNVC: 2
0089972490: RNCC: 5 | RNVC: 2

2 Dec 2004

5340-12-164-5426
Helical Compression Spring Seat

121645426
23290-182000.015: RNCC: 2 | RNVC: 2
23290-182000.015: RNCC: 3 | RNVC: 2
23290-182000-015: RNCC: 5 | RNVC: 9
23290-182000.015: RNCC: 5 | RNVC: 9
23290-182000.015: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-342-6177
Casement Fastener

123426177
U100-3414-003: RNCC: 2 | RNVC: 2
U100-3414-003: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-333-5529
Angle Bracket

123335529
G32960-W0183-C259: RNCC: 3 | RNVC: 2

5 Jan 1994

5340-12-330-1629
Lock-Release Lever

123301629
537172-2712.000: RNCC: 2 | RNVC: 2
537172-2712.000: RNCC: 3 | RNVC: 2
537172-2712: RNCC: 5 | RNVC: 9
537172-2712.000: RNCC: 5 | RNVC: 9

10 Nov 1992

5340-12-349-6478
Angle Bracket

123496478
5803671-201250.00: RNCC: 2 | RNVC: 2
0106.21250.220: RNCC: 3 | RNVC: 2
5803671-201250.00: RNCC: 5 | RNVC: 2
5803671-201250.00: RNCC: 5 | RNVC: 2

14 Dec 1999

5340-12-154-3098
Mending Plate

121543098
BD2-783: RNCC: 3 | RNVC: 9
BD0002T783: RNCC: 5 | RNVC: 2
BD0002T783: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-8358
Mounting Bracket

123158358
5019R-2400.02: RNCC: 3 | RNVC: 2
120261: RNCC: 5 | RNVC: 2

30 Nov 1988

5340-12-328-5354
Double Angle Bracket

123285354
2300354-949912: RNCC: 2 | RNVC: 2
07655-940030-00: RNCC: 5 | RNVC: 9

28 May 1992

5340-12-363-4406
Pawl Fastener

123634406
058-003-0003: RNCC: 3 | RNVC: 2

16 Jun 2004

5340-12-361-6543
Mechanic Equipment Hardware Kit

123616543
5086-008550A00C: RNCC: 3 | RNVC: 2

30 Oct 2003

5340-12-301-1933
Loop Clamp

123011933
TYP-LSAS20: RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-351-6311
Manual Control Lever

123516311
232-096725: RNCC: 3 | RNVC: 2
10024093: RNCC: 5 | RNVC: 2

10 Aug 2000

5340-12-163-5080
Loop Clamp

121635080
3141550228: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-176-0997
Dust And Moisture Seal Protective Cap

121760997
1480555001: RNCC: 3 | RNVC: 2
1 480 555 001: RNCC: 5 | RNVC: 2
81964100067: RNCC: 5 | RNVC: 2
SVNK2U2X: RNCC: 5 | RNVC: 2

8 Nov 1978

5340-12-197-5238
Angle Bracket

121975238
CF 494 112 X: RNCC: 3 | RNVC: 2
CF 494 112 X: RNCC: 5 | RNVC: 2

28 Oct 1983

5340-12-390-6764
Lock-Release Lever

123906764
107W189610.008.0: RNCC: 2 | RNVC: 2
107W189610.008.0: RNCC: 3 | RNVC: 2

3 Dec 2012

5340-12-300-9372
Retaining Strap

123009372
1211-340.07(5): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-197-9108
Angle Bracket

121979108
CF 325 709 B: RNCC: 3 | RNVC: 2
CF 325 709 B: RNCC: 5 | RNVC: 2
CF 325 709: RNCC: 5 | RNVC: 9
CF 325 709 A: RNCC: 5 | RNVC: 9
CF 325 709: RNCC: 5 | RNVC: 9
CF 325 709 A: RNCC: 5 | RNVC: 9

1 Dec 1983

5340-12-193-2031
Angle Bracket

121932031
4608351414: RNCC: 3 | RNVC: 2
721 1 88 253 1: RNCC: 5 | RNVC: 9

30 Jun 1982

5340-12-322-2007
Mending Plate

123222007
2782-363000.003.0: RNCC: 2 | RNVC: 2
2782-363000.003.0: RNCC: 3 | RNVC: 2

1 Aug 1990

5340-12-305-6170
Door Handle

123056170
580A909: RNCC: 3 | RNVC: 2
CF 429 382 -R: RNCC: 5 | RNVC: 2
CF 429 382 -R: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-12-331-0533
Nonmetallic Bumper

123310533
55.2509.010.02: RNCC: 2 | RNVC: 2
55.2509.010.02: RNCC: 3 | RNVC: 2

17 Mar 1993

5340-12-314-2832
Retaining Strap

123142832
43 688-001: RNCC: 2 | RNVC: 2
43688-001: RNCC: 3 | RNVC: 2
43 688-001: RNCC: 5 | RNVC: 9

23 Jun 1988

5340-12-700-9031
Loop Clamp

127009031
VG95211-ML-127009031: RNCC: 2 | RNVC: 2
2.11.6117.0182.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-305-1125
Mending Plate

123051125
4900059-111300.001.0: RNCC: 3 | RNVC: 2
1225856: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-338-8667
Mounting Plate

123388667
23305-185040.02.0: RNCC: 2 | RNVC: 2
23305-185040.02.0: RNCC: 3 | RNVC: 2

1 Sep 1995

5340-12-185-2353
Magnetic Catch

121852353
49782-00: RNCC: 3 | RNVC: 2
C 3734 120 4N: RNCC: 5 | RNVC: 2
C37341204N: RNCC: 5 | RNVC: 2
C 3734 120 4N: RNCC: 5 | RNVC: 2
C37341204N: RNCC: 5 | RNVC: 2

23 Sep 1980

5340-12-379-1677
Lock Bolt

123791677
2500262-191640.006.0: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-12-701-3788
Mounting Plate

127013788
VG95211-ML-127013788: RNCC: 2 | RNVC: 2
5.12.5305.1030.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-349-6067
Mending Plate

123496067
2500238-150900.002.0: RNCC: 2 | RNVC: 2
2500238-150900.002.0: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-701-7917
Mounting Bracket

127017917
VG95211-ML-127017917: RNCC: 2 | RNVC: 2
5.12.7904.0461.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-320-9946
Mounting Bracket

123209946
0223 7668: RNCC: 3 | RNVC: 2
02237668EB0150-44: RNCC: 5 | RNVC: 2
0223 7668: RNCC: 5 | RNVC: 2
2237668: RNCC: 5 | RNVC: 2
223-7668: RNCC: 5 | RNVC: 9

14 Mar 1990

5340-12-184-1861
Dust And Moisture Seal Protective Plug

121841861
11-04152SCHWARZ: RNCC: 3 | RNVC: 2
110415200: RNCC: 5 | RNVC: 2
04463481: RNCC: 5 | RNVC: 2
4463481EE5074-02: RNCC: 5 | RNVC: 2
11-04152: RNCC: 5 | RNVC: 2

3 Jul 1980

5340-12-315-3374
Loop Clamp

123153374
046 400 005 018: RNCC: 3 | RNVC: 2
046-0130-054-020: RNCC: 3 | RNVC: 2
0003402313: RNCC: 5 | RNVC: 2
0460130054020: RNCC: 5 | RNVC: 2

13 Oct 1988

5340-12-346-4022
Access Cover

123464022
13 230 057: RNCC: 3 | RNVC: 2

21 Jul 1998

5340-12-183-6614
Mending Plate

121836614
CF 415 936 BX: RNCC: 2 | RNVC: 2
CF 415 936 BX: RNCC: 3 | RNVC: 2
CF 415 936 BX: RNCC: 5 | RNVC: 2
CF 415 936 BX: RNCC: 5 | RNVC: 2
CF 415 936 AX: RNCC: 5 | RNVC: 9
CF415936AX: RNCC: 5 | RNVC: 9
CF415936AX: RNCC: 5 | RNVC: 9
CF 415 936 AX: RNCC: 5 | RNVC: 9
CF415936AX: RNCC: 5 | RNVC: 9

8 May 1980

5340-12-350-5097
Runner

123505097
2W132R005-9000.01: RNCC: 3 | RNVC: 2

6 Apr 2000

5340-12-342-3281
Dust And Moisture Seal Protective Cap

123423281
582542: RNCC: 3 | RNVC: 2
454105: RNCC: 5 | RNVC: 2
582 542: RNCC: 5 | RNVC: 2
582.542: RNCC: 5 | RNVC: 2

23 Jan 1997

5340-12-176-2381
Section Block Clamp

121762381
PAN4274-6: RNCC: 3 | RNVC: 2

15 Nov 1978

5340-12-375-4928
Retaining Strap

123754928
700325022203: RNCC: 3 | RNVC: 2
2/1G8-22MMN325: RNCC: 5 | RNVC: 2

9 Jun 2008

5340-12-192-4173
Flush Lock

121924173
1497 LS: RNCC: 3 | RNVC: 2
1497: RNCC: 5 | RNVC: 2
0622003: RNCC: 5 | RNVC: 2
622003: RNCC: 5 | RNVC: 9

21 Apr 1982

5340-12-149-1092
Angle Bracket

121491092
121L19004: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-350-5917
Tee Hinge

123505917
160-88342: RNCC: 3 | RNVC: 2
160-88342: RNCC: 5 | RNVC: 9

18 Apr 2000

5340-12-386-6831
Mounting Plate

123866831
0420 9979: RNCC: 3 | RNVC: 2

22 Sep 2011

5340-12-380-3783
Mounting Bracket

123803783
4257501514: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-12-309-4085
Mending Plate

123094085
4900059-751920.005.0: RNCC: 2 | RNVC: 2
4900059-751920.005.0: RNCC: 3 | RNVC: 2

22 Jan 1987

5340-12-182-7706
Nonmetallic Bumper

121827706
3433250044: RNCC: 3 | RNVC: 2

25 Feb 1980

5340-12-132-3051

5340-12-322-8091
Plain Solid Disk

123228091
8470 032 149: RNCC: 3 | RNVC: 2
8470032149: RNCC: 5 | RNVC: 2
8470032149: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-302-2638
Mending Plate

123022638
4618500111: RNCC: 3 | RNVC: 2

13 Dec 1984

5340-12-163-5612
Loop Clamp

121635612
LN9490B25: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-387-0279
Casement Fastener

123870279
3111-0019: RNCC: 3 | RNVC: 2
1SCH/3111/0019: RNCC: 5 | RNVC: 2

27 Oct 2011

5340-12-179-1364
Nonmetallic Bumper

121791364
1121-71123.02: RNCC: 3 | RNVC: 2
1121-71123-02: RNCC: 5 | RNVC: 2

8 Jun 1979

5340-12-310-4371
Access Hole Frame

123104371
5801758-0710.00: RNCC: 2 | RNVC: 2
5801758-0710.00: RNCC: 3 | RNVC: 2

22 May 1987

5340-12-199-1669
Butt Hinge

121991669
71100-2310-00-07: RNCC: 3 | RNVC: 2
71100-2310-00-07: RNCC: 5 | RNVC: 2
71100-2310-00-07: RNCC: 5 | RNVC: 9

3 Apr 1984

5340-12-702-2201
Mounting Bracket

127022201
VG95211-ML-127022201: RNCC: 2 | RNVC: 2
30.7601.10: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-367-8533
Snap Hook

123678533
HMS 0639: RNCC: 3 | RNVC: 2

25 Oct 2005

5340-12-350-4374
Section Block Clamp

123504374
JN0413ECF52: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-151-5106
Federkraft- Klipp

5340-12-369-6039
Access Cover

123696039
412 01 751: RNCC: 3 | RNVC: 2

31 Jul 2006

5340-12-178-9124
Loop Clamp

121789124
5561769/4: RNCC: 3 | RNVC: 2
5561769-4: RNCC: 5 | RNVC: 2
5561769-4A: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-169-2234
Loop Clamp

121692234
NO PRIMARY REF 12-169-2234: RNCC: 3 | RNVC: 2
C15153: RNCC: 5 | RNVC: 9
B44 053-A35: RNCC: 5 | RNVC: 9
B44053-A35: RNCC: 5 | RNVC: 9
B44053A35: RNCC: 5 | RNVC: 9

27 Apr 1977

5340-12-134-1653
Mending Plate

121341653
7468 040 104: RNCC: 3 | RNVC: 2
1190-897: RNCC: 5 | RNVC: 2
153-8576: RNCC: 5 | RNVC: 2
8751-13-89.04: RNCC: 5 | RNVC: 2
8751-13-89-04: RNCC: 5 | RNVC: 2
1538576: RNCC: 5 | RNVC: 2
153-8576: RNCC: 5 | RNVC: 9
7468040104: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-147-0549
Resilient Mount

121470549
DIN95363-C100X75-M12-NR55ST: RNCC: 2 | RNVC: 2
520049-M12-NR55.ST: RNCC: 5 | RNVC: 2
TS3484: RNCC: 5 | RNVC: 2
VG95363-C100X75-M12-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-183-9830
Platte

121839830
7882814: RNCC: 3 | RNVC: 2
7882-814: RNCC: 5 | RNVC: 2
1000025-565100-02: RNCC: 5 | RNVC: 9
1000025-565100.02: RNCC: 5 | RNVC: 9

7 Jun 1980

5340-12-320-6500
Loop Clamp

123206500
DIN3015-LA-K-4R-30-PP-W1: RNCC: 2 | RNVC: 2
HRL4A30PP STMBL: RNCC: 3 | RNVC: 2
RAPR3-430: RNCC: 3 | RNVC: 2
SP430PP-DP-AS: RNCC: 3 | RNVC: 2
RAPR3-430: RNCC: 5 | RNVC: 2
DIN3015-LA4R-30PP-W1-K: RNCC: 5 | RNVC: 2
330394: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-189-7694
Hand Crank

121897694
VG85086-A-225X19-AM: RNCC: 2 | RNVC: 2
VG85086-A-225X19-AM: RNCC: 3 | RNVC: 2
VG85086-A-225X19-AM: RNCC: 3 | RNVC: 2
VG85086-A-225X19-AM: RNCC: 3 | RNVC: 9
A225X19VG85086-RG5: RNCC: 5 | RNVC: 9
A225X19VG85086RG5: RNCC: 5 | RNVC: 9
A225X19VG85086GCUSN5ZNPB: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-305-0555
Angle Bracket

123050555
A-296712-163: RNCC: 3 | RNVC: 2
A296712-163: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-363-9900
Loop Clamp

123639900
01176171: RNCC: 3 | RNVC: 2

10 Aug 2004

5340-12-385-9642
Access Cover

123859642
11280211101: RNCC: 3 | RNVC: 2

26 Jul 2011

5340-12-358-7870
Webbing Strap

123587870
4065800086: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-309-4064
Retaining Strap

123094064
WW 418 144: RNCC: 2 | RNVC: 2
WW 418 144: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-351-8957
Access Cover

123518957
54.1038.035.33: RNCC: 2 | RNVC: 2
54.1038.035.33: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-12-316-4713
Mounting Bracket

123164713
54.0026.889.00: RNCC: 3 | RNVC: 2
54002688900: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-316-1064
Nonmetallic Bumper

123161064
3134920082: RNCC: 3 | RNVC: 2
3134920082: RNCC: 5 | RNVC: 2

22 Dec 1988

5340-12-010-8644

5340-12-024-9846

5340-12-191-1116
Loop Clamp

121911116
02573878: RNCC: 3 | RNVC: 2
2573878ED5067-71: RNCC: 5 | RNVC: 2

13 Jan 1982

5340-12-331-5584
Folding Stay

123315584
1490-4668.00: RNCC: 3 | RNVC: 2

19 May 1993

5340-12-196-6047
Mending Plate

121966047
81412520017: RNCC: 3 | RNVC: 2
81.4125.0017: RNCC: 5 | RNVC: 2
0458.34.00504: RNCC: 5 | RNVC: 2

21 Jul 1983

5340-12-154-6086
Loop Clamp

121546086
28209950801E0: RNCC: 3 | RNVC: 2
8209950801: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-351-5000
Retaining Strap

123515000
4602950340: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-330-7210
Manual Control Handle

123307210
11315301: RNCC: 3 | RNVC: 2
EZ113153: RNCC: 5 | RNVC: 2

1 Feb 1993

5340-12-044-5621

5340-12-312-3848
Helical Compression Spring Seat

123123848
42043155: RNCC: 3 | RNVC: 2

22 Dec 1987

5340-12-340-9981
Webbing Strap

123409981
8412073: RNCC: 3 | RNVC: 2
84 12 073: RNCC: 5 | RNVC: 2

13 Jul 1996

5340-12-302-0181
Resilient Mount

123020181
741029MITTEL: RNCC: 3 | RNVC: 2
57410290005: RNCC: 5 | RNVC: 2

27 Nov 1984

5340-12-388-0082
Dust And Moisture Seal Protective Cap

123880082
43952: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-388-0264
Multiple Angle Bracket

123880264
5821750041: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-12-326-4380
Mounting Bracket

123264380
3965000532: RNCC: 3 | RNVC: 2

16 Sep 1991

5340-12-359-1332
Nonmetallic Bumper

123591332
1308: RNCC: 3 | RNVC: 2

19 Dec 2002

5340-12-377-4337
Rubber Bumper Strip

123774337
10089277: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-12-339-7652
Helical Compression Spring Seat

123397652
81434315017: RNCC: 3 | RNVC: 2
81.43431.5017: RNCC: 5 | RNVC: 2

15 Jan 1996

5340-12-382-4583
Mechanical Stop

123824583
34.12.0001: RNCC: 3 | RNVC: 2

24 Jun 2010

5340-12-309-2658
Swivel Caster

123092658
2477DYK 100 P30: RNCC: 3 | RNVC: 2
2477DYK100P30: RNCC: 5 | RNVC: 2

7 Jan 1987

5340-12-351-4016
Nonmetallic Bumper

123514016
10063-232000.01: RNCC: 3 | RNVC: 2
10063-232000.01: RNCC: 5 | RNVC: 9

24 Jul 2000

5340-12-324-8521
Lock-Release Lever

123248521
VM565/I-3: RNCC: 3 | RNVC: 2
ZV031098-3: RNCC: 5 | RNVC: 2

27 Mar 1991

5340-12-195-2651
Nonmetallic Bumper

121952651
4-0203: RNCC: 3 | RNVC: 2
4.0203: RNCC: 5 | RNVC: 2

31 Jan 1983

5340-12-301-6071
Angle Bracket

123016071
2300107-310100.10: RNCC: 2 | RNVC: 2
2300107-310100.10: RNCC: 3 | RNVC: 2
2300107-310100.10: RNCC: 5 | RNVC: 9
2300107-310100.10: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-158-6782

5340-12-359-7935
Mending Plate

123597935
2500261-260000.005.0: RNCC: 2 | RNVC: 2
2500261-260000.005.0: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-192-9399
Spring Loaded Cylinder Fastener

121929399
3512 118 1279 1: RNCC: 3 | RNVC: 2
3512 118 1279: RNCC: 5 | RNVC: 2
351211812791: RNCC: 5 | RNVC: 2

7 Jun 1982

5340-12-372-3896
Retaining Strap

123723896
5509953168: RNCC: 3 | RNVC: 2

12 Jul 2007

5340-12-313-1928
Access Cover

123131928
1068936: RNCC: 2 | RNVC: 2
1068936: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-12-360-3019
Mounting Bracket

123603019
1864411500: RNCC: 3 | RNVC: 2
1864411500: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-372-1523
Dust And Moisture Seal Protective Cap

123721523
AE75560J: RNCC: 3 | RNVC: 2
S281M20X1009: RNCC: 5 | RNVC: 2

21 Jun 2007

5340-12-366-5781
Mounting Bracket

123665781
BD5.250.736.220: RNCC: 3 | RNVC: 2

11 May 2005

5340-12-376-2272
Flush Lock

123762272
10065006: RNCC: 3 | RNVC: 2

28 Aug 2008

5340-12-340-7505
Hand Crank

123407505
2095.24.18.00: RNCC: 3 | RNVC: 2
201538: RNCC: 5 | RNVC: 2
2095.25.18.00: RNCC: 5 | RNVC: 9

5 Jun 1996

5340-12-353-2151
Access Cover

123532151
209673: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-354-5523
Retaining Bail

123545523
00646061: RNCC: 3 | RNVC: 2
06420P029008: RNCC: 5 | RNVC: 2

26 Jul 2001

5340-12-392-2196
Mounting Bracket

123922196
T251M3004206: RNCC: 3 | RNVC: 2

16 May 2013

5340-12-380-2703
Bumper

123802703
S535M10X5001: RNCC: 3 | RNVC: 2

13 Oct 2009

5340-12-350-5933
Door Button

123505933
54.1038.130.24: RNCC: 2 | RNVC: 2
54.1038.130.24: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-135-7267

5340-12-323-8280
Mounting Plate

123238280
0289 1746: RNCC: 3 | RNVC: 2

21 Dec 1990

5340-12-357-8147
Mounting Bracket

123578147
2300042-255312.001: RNCC: 2 | RNVC: 2
9940339: RNCC: 3 | RNVC: 2
2300042-255312.001: RNCC: 5 | RNVC: 2

29 Jul 2002

5340-12-361-7334
Angle Bracket

123617334
7802493506: RNCC: 3 | RNVC: 2

10 Nov 2003

5340-12-360-3528
Retaining Strap

123603528
0009550104: RNCC: 3 | RNVC: 2
0009550104: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-323-4006
Electrical-Mechanical Equipment Post

123234006
01TC35285: RNCC: 3 | RNVC: 2

22 Nov 1990

5340-12-044-3493

5340-12-340-2049
Expansion Plug

123402049
DIN443-A32-ST-PHR: RNCC: 2 | RNVC: 2
000443032000: RNCC: 5 | RNVC: 2
A32DIN443-PHR: RNCC: 5 | RNVC: 2

13 Mar 1996

5340-12-330-8884
Rod End Clevis

123308884
480-7345-13-00-22: RNCC: 3 | RNVC: 2
480/7345-13-00-22: RNCC: 5 | RNVC: 2

19 Feb 1993

5340-12-158-0301
Loop Clamp

121580301
DIN3016-1-B2-10-18X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-B2-10-18X15-W1-2: RNCC: 3 | RNVC: 2
RS0.10-18/15: RNCC: 3 | RNVC: 2
2360-394000-09-0: RNCC: 5 | RNVC: 2
2360-394000.09.0: RNCC: 5 | RNVC: 2
4207008010: RNCC: 5 | RNVC: 2
RS10-18-15: RNCC: 5 | RNVC: 2
RS10-18/15: RNCC: 5 | RNVC: 2
2360-394000.09.0: RNCC: 5 | RNVC: 2
2360-394000.09.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-137-2874
Butt Hinge

121372874
DIN7954-A30-ST-BK: RNCC: 2 | RNVC: 2
A30DIN7954: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-9708
Metal Grille

127019708
VG95211-ML-127019708: RNCC: 2 | RNVC: 2
0148-L80 GOST 3584-73: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-382-3856
Clamping Catch

123823856
V951L03-1X1AGV: RNCC: 3 | RNVC: 2

14 Jun 2010

5340-12-380-0558
Mechanical Stop

123800558
649-111-0031: RNCC: 3 | RNVC: 2
371746: RNCC: 5 | RNVC: 2

23 Sep 2009

5340-12-304-5170
Pawl Fastener

123045170
V965L1-2L1AG: RNCC: 3 | RNVC: 2
65L1-2L1AB: RNCC: 5 | RNVC: 2

26 Jul 1985

5340-12-382-9189
Swivel Caster

123829189
LX-VPP 150G-SG-FI: RNCC: 3 | RNVC: 2

24 Aug 2010

5340-12-192-5511
Hinge Torsion Bar

121925511
LN9373-5X790: RNCC: 2 | RNVC: 2

4 May 1982

5340-12-190-2367
Retaining Strap

121902367
65.7096.200.09-A001: RNCC: 3 | RNVC: 2
253795: RNCC: 5 | RNVC: 2
65-7096-200-09A001: RNCC: 5 | RNVC: 2
65.7096.200.09A001: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-349-1762
Spring Tension Clip

123491762
181433001: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-12-356-5100
Dust And Moisture Seal Protective Cap

123565100
224711A: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-028-4080

5340-12-362-3850
Plug Button

123623850
3016890073: RNCC: 3 | RNVC: 2

16 Feb 2004

5340-12-355-9568
Mounting Plate

123559568
4618200411: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-347-9507
Angle Bracket

123479507
54.0058.202.00: RNCC: 2 | RNVC: 2
54.0058.202.00: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-12-302-5401
Leather Strap

123025401
CF 339 331 A: RNCC: 3 | RNVC: 2
CF 339 331 A: RNCC: 3 | RNVC: 2

11 Jan 1985

5340-12-327-6775
Electrical-Mechanical Equipment Post

123276775
CF 802 069 A: RNCC: 2 | RNVC: 2
CF 802 069 A: RNCC: 3 | RNVC: 2

18 Feb 1992

5340-12-198-3525
Angle Bracket

121983525
1878212: RNCC: 3 | RNVC: 2
75E10.34.136-3: RNCC: 5 | RNVC: 2

18 Jan 1984

5340-12-352-6758
Track Stop

123526758
1421659: RNCC: 3 | RNVC: 2
E/MK1: RNCC: 5 | RNVC: 2
14 21 65 9: RNCC: 5 | RNVC: 9

6 Dec 2000

5340-12-346-6773
Mounting Bracket

123466773
2300348-970451.000.0: RNCC: 2 | RNVC: 2
2300348-970451.000.0: RNCC: 3 | RNVC: 2
1570028: RNCC: 5 | RNVC: 2

25 Aug 1998

5340-12-382-6699
Snap Hook

123826699
4586: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-12-188-8685
Angle Bracket

121888685
SP05900: RNCC: 3 | RNVC: 2
20-4-971-6002: RNCC: 5 | RNVC: 9
20.4.971.6002: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-12-702-5824
Mounting Bracket

127025824
VG95211-ML-127025824: RNCC: 2 | RNVC: 2
5.51.9202.0011.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-318-2374
Metal Runner

123182374
6100126-3000.30: RNCC: 2 | RNVC: 2
8791322118: RNCC: 3 | RNVC: 9

22 Jun 1989

5340-12-168-0795
Retaining Strap

121680795
3H050-3402: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-12-197-7978
Double Angle Bracket

121977978
7800190215: RNCC: 3 | RNVC: 2
5801807-2003: RNCC: 5 | RNVC: 2
5801807-2003: RNCC: 5 | RNVC: 9

23 Nov 1983

5340-12-171-7550
Dust And Moisture Seal Protective Cap

121717550
8977519604: RNCC: 3 | RNVC: 2
0162827: RNCC: 5 | RNVC: 2
81.52315-0023: RNCC: 5 | RNVC: 2
81523150023: RNCC: 5 | RNVC: 2
162827: RNCC: 5 | RNVC: 9

11 Nov 1977

5340-12-186-5856
Double Angle Bracket

121865856
C22136-A1000-C854: RNCC: 3 | RNVC: 2
C22136A1000C854: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-12-358-0895
Snap-In Plain Standoff

123580895
8.14.05: RNCC: 3 | RNVC: 2
8-14-05: RNCC: 5 | RNVC: 2

11 Sep 2002

5340-12-318-7922
Mounting Bracket

123187922
5803667-16000: RNCC: 2 | RNVC: 2
7802004160: RNCC: 3 | RNVC: 2
5803667-16000: RNCC: 5 | RNVC: 2
78020 04160: RNCC: 5 | RNVC: 9

17 Aug 1989

5340-12-314-1060
Mounting Bracket

123141060
E-4782-01-44: RNCC: 3 | RNVC: 2
E4782-01-44: RNCC: 5 | RNVC: 2

8 Jun 1988

5340-12-300-2838
Retaining Strap

123002838
H78550-A120-S3: RNCC: 3 | RNVC: 2
1043226-VERZINKT: RNCC: 3 | RNVC: 2
1043226VERZINKT: RNCC: 5 | RNVC: 2
12WN7855/A-VERZINKT: RNCC: 5 | RNVC: 2
A12SN78550-STVZK: RNCC: 5 | RNVC: 2
SN78550-A12-ST-A3G-F: RNCC: 5 | RNVC: 2

20 Jul 1984

5340-12-333-2646
Mounting Bracket

123332646
LB-IV/2-40E01-39: RNCC: 2 | RNVC: 2

16 Nov 1993

5340-12-318-2379
Loop Clamp

123182379
DIN3015-Z-A-1R-10-10-PA6-W1: RNCC: 2 | RNVC: 2
HRZ1A10-10PA STMBL: RNCC: 3 | RNVC: 2
RBNR1-110: RNCC: 3 | RNVC: 2
SP110/10PA-GD-AS: RNCC: 3 | RNVC: 2
HR1ZA10-10.0/2: RNCC: 5 | RNVC: 2
RBNR1-110: RNCC: 5 | RNVC: 2
DIN3015-Z-A-1R-10-10-PA-W1: RNCC: 5 | RNVC: 2
DIN3015-ZA1R-10-10PA-W1: RNCC: 5 | RNVC: 2
SP110/10PA-GD-AS: RNCC: 5 | RNVC: 2

22 Jun 1989

5340-12-300-8527
Mending Plate

123008527
1300062-184000: RNCC: 2 | RNVC: 2
7834594: RNCC: 3 | RNVC: 2
7834-594: RNCC: 5 | RNVC: 2

5 Sep 1984

5340-12-190-7221
Loop Clamp

121907221
B44030J0040: RNCC: 3 | RNVC: 2
B44030-J40: RNCC: 5 | RNVC: 2
22/71180.00: RNCC: 5 | RNVC: 9
011 6074 571180: RNCC: 5 | RNVC: 9
0116074571180: RNCC: 5 | RNVC: 9
22-71180-00: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-192-5769
Resilient Mount

121925769
1341109000: RNCC: 3 | RNVC: 2
95-75733: RNCC: 5 | RNVC: 2
N15007: RNCC: 5 | RNVC: 2
331933469: RNCC: 5 | RNVC: 2
B462K2BAM90G1: RNCC: 5 | RNVC: 2
2K2-BAM-90-G1: RNCC: 5 | RNVC: 2
2K2BAM90G1: RNCC: 5 | RNVC: 9
2K2BAM90G1: RNCC: 5 | RNVC: 9
B462K2BAM90G1: RNCC: 5 | RNVC: 9
2K2-BAM-90-G1: RNCC: 5 | RNVC: 9

5 May 1982

5340-12-340-1985
Mounting Bracket

123401985
81423590012: RNCC: 3 | RNVC: 2
219515-4000: RNCC: 5 | RNVC: 2
2195154000: RNCC: 5 | RNVC: 2

13 Mar 1996

5340-12-379-0492
Butt Hinge

123790492
218-9109: RNCC: 3 | RNVC: 2

18 Jun 2009

5340-12-197-7833
Webbing Strap

121977833
5801998-651000.04: RNCC: 2 | RNVC: 2
5801998-651000.04: RNCC: 3 | RNVC: 2
5801998-651000.04: RNCC: 5 | RNVC: 9

23 Nov 1983

5340-12-354-4471
Dust And Moisture Seal Boot

123544471
4258320099: RNCC: 3 | RNVC: 2

12 Jul 2001

5340-12-327-4855
Access Cover

123274855
4606930330: RNCC: 3 | RNVC: 2

27 Jan 1992

5340-12-369-4318
Retaining Bail

123694318
1609201242: RNCC: 3 | RNVC: 2

4 Jul 2006

5340-12-334-2871
Double Angle Bracket

123342871
M457267: RNCC: 3 | RNVC: 9

22 Apr 1994

5340-12-135-6978

5340-12-302-6879
Angle Bracket

123026879
1128970: RNCC: 3 | RNVC: 2
128970: RNCC: 5 | RNVC: 9

23 Jan 1985

5340-12-190-9535
Ball Socket Seat

121909535
6160520035: RNCC: 3 | RNVC: 2

29 Dec 1981

5340-12-362-7648
Mounting Bracket

123627648
S533M7006212: RNCC: 3 | RNVC: 2

30 Mar 2004

5340-12-332-9984
Mounting Bracket

123329984
66.3567.330.01-A001: RNCC: 3 | RNVC: 2

20 Oct 1993

5340-12-330-2054
Protection Bellows

123302054
272.377.602: RNCC: 3 | RNVC: 2
272.377 602: RNCC: 5 | RNVC: 9

14 Nov 1992

5340-12-198-8753
Clamping Catch

121988753
1000042-133120: RNCC: 3 | RNVC: 2
1000042-133120: RNCC: 5 | RNVC: 9

8 Mar 1984

5340-12-311-1205
Mending Plate

123111205
AFG0190789: RNCC: 3 | RNVC: 2

28 Jul 1987

5340-12-159-8314
Clamping Catch

121598314
37319-504: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-179-2721
Angle Bracket

121792721
183801799: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-149-1186
Angle Bracket

121491186
521H20001: RNCC: 3 | RNVC: 2
8201530740: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-320-3914
Nonmetallic Bumper

123203914
171711279: RNCC: 3 | RNVC: 2

9 Jan 1990

5340-12-349-1906
Metal Grille

123491906
88521 15475: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-354-1936
Loop Clamp

123541936
PAN4231DDD4820: RNCC: 3 | RNVC: 2

19 Jun 2001

5340-12-353-7998
Dust And Moisture Seal Protective Plug

123537998
47067082100: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-367-4221
Mounting Bracket

123674221
943375175: RNCC: 3 | RNVC: 2

16 Aug 2005

5340-12-309-4083
Mending Plate

123094083
WW 426 315: RNCC: 2 | RNVC: 2
WW 426 315: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-172-8917
Retaining Strap

121728917
1009109: RNCC: 3 | RNVC: 2
4115468: RNCC: 5 | RNVC: 2
1015-12MM: RNCC: 5 | RNVC: 2

2 Mar 1978

5340-12-168-2778
Loop Clamp

121682778
LN9491B18: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-353-4055
Loop Clamp

123534055
EN4113F10WH: RNCC: 2 | RNVC: 2

21 Mar 2001

5340-12-325-6424
Access Door

123256424
100013721: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-12-372-1532
Manual Control Handle

123721532
S533I30A1111: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-12-301-6362
Pad Eye

123016362
43712126-601: RNCC: 2 | RNVC: 2
43712126-601: RNCC: 3 | RNVC: 2
43712126-601: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-309-7941
Access Cover

123097941
5057960: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-390-0507
Section Block Clamp

123900507
311684: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-178-2184
Mounting Bracket

121782184
T12966: RNCC: 3 | RNVC: 2
T12966: RNCC: 5 | RNVC: 9

9 Apr 1979

5340-12-339-4493
Mounting Plate

123394493
4068 301 274: RNCC: 3 | RNVC: 2
4068301274: RNCC: 5 | RNVC: 2

24 Nov 1995

5340-12-307-1564
Catch Strike

123071564
4068870021: RNCC: 3 | RNVC: 2

15 May 1986

5340-12-332-6021
Plug Button

123326021
6675450046: RNCC: 3 | RNVC: 2

26 Aug 1993

5340-12-315-8864
Nonmetallic Bumper

123158864
1244760284: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-12-372-0042
Pad Eye

123720042
2660461: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-12-380-5352
Angle Bracket

123805352
8800150040: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-12-360-0352
Handle Grip

123600352
BD5.250.100.400: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-382-6108
Nut And Bolt Head Protective Cap

123826108
0590010: RNCC: 3 | RNVC: 2

16 Jul 2010

5340-12-387-4112
Lock-Release Lever

123874112
ZG7282G009: RNCC: 3 | RNVC: 2

12 Dec 2011

5340-12-382-1855
Loop Clamp

123821855
42092219: RNCC: 3 | RNVC: 2

19 May 2010

5340-12-358-6292
Mounting Plate

123586292
ST153257: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-12-349-1365
Mending Plate

123491365
1304 306 090: RNCC: 3 | RNVC: 2
1304306090: RNCC: 5 | RNVC: 2

29 Sep 1999

5340-12-394-2135
Strap Hinge

123942135
776541: RNCC: 3 | RNVC: 2

12 Nov 2013

5340-12-349-1903
Metal Grille

123491903
88521 15478: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-391-8291
Access Cover

123918291
I006472TAN686A: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-12-394-4110
Mounting Bracket

123944110
10187-188205.002.0: RNCC: 2 | RNVC: 2
10187-188205.002.0: RNCC: 3 | RNVC: 2

28 Nov 2013

5340-12-334-9750
Access Cover

123349750
70297: RNCC: 3 | RNVC: 2

7 Jul 1994

5340-12-332-3925
Mending Plate

123323925
DKAU014: RNCC: 3 | RNVC: 2

5 Aug 1993

5340-12-042-0748

5340-12-130-4349

5340-12-044-1830

5340-12-363-0533
Mounting Plate

123630533
2300365-250410.000: RNCC: 2 | RNVC: 2
2300365-250410.000: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-366-8988
Loop Clamp

123668988
00251732: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-146-7910
Spannband

5340-12-141-0816
Butt Hinge

121410816
DIN7954-D40-MS-BK: RNCC: 2 | RNVC: 2
D40DIN7954MS: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-308-6796
Access Cover

123086796
1281-11400.01: RNCC: 2 | RNVC: 2
159094: RNCC: 3 | RNVC: 2
1281-11400.01: RNCC: 5 | RNVC: 2

7 Nov 1986

5340-12-357-1629
Mounting Bracket

123571629
5803854-1600.00: RNCC: 2 | RNVC: 2
7802842160: RNCC: 3 | RNVC: 2
78028 42160: RNCC: 5 | RNVC: 9

14 May 2002

5340-12-383-6285
Angle Bracket

123836285
601257-201500.01: RNCC: 2 | RNVC: 2
601257-201500.01: RNCC: 3 | RNVC: 2

16 Nov 2010

5340-12-182-3583
Webbing Strap

121823583
2500066-130000: RNCC: 2 | RNVC: 2
2500066-130000: RNCC: 5 | RNVC: 9
000-D7-25X2,5X300-PE-RAL6031: RNCC: 6 | RNVC: 9

28 Jan 1980

5340-12-360-7902
Access Cover

123607902
502373: RNCC: 3 | RNVC: 2
19-1000-076: RNCC: 5 | RNVC: 2

10 Jul 2003

5340-12-363-9079
Angle Bracket

123639079
J92228240-002: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-176-2475
Access Cover

121762475
8465664: RNCC: 3 | RNVC: 2
1778-366: RNCC: 5 | RNVC: 2
1778366: RNCC: 5 | RNVC: 2

23 Nov 1978

5340-12-194-5251
Mending Plate

121945251
20-5180-074: RNCC: 3 | RNVC: 2

12 Nov 1982

5340-12-194-7908
Electrical-Mechanical Equipment Post

121947908
66.3869.410-06-A001: RNCC: 3 | RNVC: 2
66-3869-410-06A001: RNCC: 5 | RNVC: 2
748637: RNCC: 5 | RNVC: 2

8 Dec 1982

5340-12-194-5255
Lock-Release Lever

121945255
20-5120-187: RNCC: 3 | RNVC: 2

12 Nov 1982

5340-12-145-0188
Retaining Clip

121450188
9S6-1AATAN16445: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-303-3659
Shock Mount Pad

123033659
588.70-100006-001: RNCC: 3 | RNVC: 2

18 Mar 1985

5340-12-320-1188
Kunst Gleitschiene

123201188
0957201: RNCC: 3 | RNVC: 2

8 Dec 1989

5340-12-394-3875
Webbing Strap

123943875
19046/500X25: RNCC: 3 | RNVC: 2
83131139: RNCC: 5 | RNVC: 2

27 Nov 2013

5340-12-378-3620
Retaining Clip

123783620
17874880: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-199-3418
Nonmetallic Bumper

121993418
5801763-030000.004: RNCC: 2 | RNVC: 2
5801763-030000.004: RNCC: 3 | RNVC: 2
5801763-030000.004: RNCC: 5 | RNVC: 9

13 Apr 1984

5340-12-702-8514
Helical Compression Spring Seat

127028514
52-04007270567: RNCC: 2 | RNVC: 2

3 Jan 1996

5340-12-359-8476
Dust And Moisture Seal Protective Cap-Plug

123598476
600B336RAL3000: RNCC: 3 | RNVC: 2
GPN600B336RAL3000: RNCC: 5 | RNVC: 2
600B336ROT: RNCC: 5 | RNVC: 9
GPN600-B336RAL3000: RNCC: 5 | RNVC: 9

13 Mar 2003

5340-12-196-6980
Spring Loaded Cylinder Fastener

121966980
H4-584947: RNCC: 3 | RNVC: 2
H4-584947: RNCC: 5 | RNVC: 9
H4-584947: RNCC: 5 | RNVC: 9

3 Aug 1983

5340-12-701-1943
Mounting Bracket

127011943
VG95211-ML-127011943: RNCC: 2 | RNVC: 2
5.12.0602.0530.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7523
Angle Bracket

127017523
VG95211-ML-127017523: RNCC: 2 | RNVC: 2
5.12.7615.8400.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-194-7125
Angle Bracket

121947125
C-000061-423: RNCC: 3 | RNVC: 2
C000061-423: RNCC: 5 | RNVC: 9

30 Nov 1982

5340-12-183-0756
Resilient Mount

121830756
6300-3: RNCC: 3 | RNVC: 2
0287 1624: RNCC: 5 | RNVC: 2
2871624: RNCC: 5 | RNVC: 2
2871624ED8971-79: RNCC: 5 | RNVC: 2
6300-3: RNCC: 5 | RNVC: 9

18 Mar 1980

5340-12-356-5237
Mounting Bracket

123565237
11.44086-0378: RNCC: 3 | RNVC: 2
11.44000-2610POS176: RNCC: 5 | RNVC: 2

7 Mar 2002

5340-12-312-5597
Angle Bracket

123125597
4200081-184101.001: RNCC: 2 | RNVC: 2
9844959: RNCC: 3 | RNVC: 2
9844959: RNCC: 5 | RNVC: 9
4200081-184101.001: RNCC: 5 | RNVC: 9
4200081-184101.001: RNCC: 5 | RNVC: 9

18 Jan 1988

5340-12-153-3716
Resilient Mount

121533716
DIN95363-B30X40-M8X16-NR70ST: RNCC: 2 | RNVC: 2
510028-M8X16.NR70.ST: RNCC: 5 | RNVC: 2
132-131.00-023: RNCC: 5 | RNVC: 2
132-131-23: RNCC: 5 | RNVC: 9
132E131-23: RNCC: 5 | RNVC: 9
VG95363-B30X40-M8X16-NR70ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-169-6014
Spring Tension Clip

121696014
4142648: RNCC: 3 | RNVC: 2
4142-648: RNCC: 5 | RNVC: 2
154-0344: RNCC: 5 | RNVC: 2
154-0344: RNCC: 5 | RNVC: 9
E154-0344: RNCC: 5 | RNVC: 9

27 May 1977

5340-12-325-4142
Spacing Threaded Standoff

123254142
PAN5171-08-080: RNCC: 3 | RNVC: 2
PAN5171-08080: RNCC: 5 | RNVC: 2

5 Jun 1991

5340-12-150-3122
Retaining Strap

121503122
C20122-A134-C20: RNCC: 3 | RNVC: 2
C20122A134C20: RNCC: 5 | RNVC: 2
TBK134T20: RNCC: 5 | RNVC: 9
TFS12-00035: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-166-0544
Mending Plate

121660544
8370780224: RNCC: 3 | RNVC: 2
4799-033: RNCC: 5 | RNVC: 2
4799033: RNCC: 5 | RNVC: 2

29 Jul 1976

5340-12-306-8556
Electrical-Mechanical Equipment Post

123068556
VG95148B5XM2,5X23,8-AL: RNCC: 2 | RNVC: 2
VG95148B5XM2,5X23,8-AL: RNCC: 3 | RNVC: 2
6210428: RNCC: 3 | RNVC: 2

10 Apr 1986

5340-12-152-3814
Bail Handle

121523814
C20123-A10-A3: RNCC: 3 | RNVC: 2
C20123-F10-A3: RNCC: 5 | RNVC: 2
TBSCHL10C: RNCC: 5 | RNVC: 2
C20123A10A3: RNCC: 5 | RNVC: 2
C20123F10A3: RNCC: 5 | RNVC: 2
T.BSCHL.10C: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-309-1816
Case Corner

123091816
P-244558-756: RNCC: 3 | RNVC: 2
P244558-756: RNCC: 5 | RNVC: 2

19 Dec 1986

5340-12-190-9430
Detent Plunger

121909430
2423121018: RNCC: 3 | RNVC: 2

28 Dec 1981

5340-12-300-2135
Retaining Strap

123002135
1369950137: RNCC: 3 | RNVC: 2

14 Jul 1984

5340-12-322-2377
Mounting Bracket

123222377
10 0021 190: RNCC: 2 | RNVC: 2
10 0021 190: RNCC: 3 | RNVC: 2

3 Aug 1990

5340-12-393-6421
Mounting Bracket

123936421
11.28044-1232: RNCC: 3 | RNVC: 2
11.28044-1232: RNCC: 5 | RNVC: 2

30 Sep 2013

5340-12-321-8260
Protection Bellows

123218260
9000 8205: RNCC: 3 | RNVC: 2

29 Jun 1990

5340-12-392-7938
Angle Bracket

123927938
424AB053: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-12-340-5467
Angle Bracket

123405467
5901751341: RNCC: 3 | RNVC: 2
5901751341: RNCC: 5 | RNVC: 2
5901751341: RNCC: 5 | RNVC: 2
590 175 13 41: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-313-8657
Angle Bracket

123138657
4354262340: RNCC: 3 | RNVC: 2
435 426 23 40: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-321-8559
Double Angle Bracket

123218559
9000 2350: RNCC: 3 | RNVC: 2

3 Jul 1990

5340-12-376-9087
Dust And Moisture Seal Protective Cap

123769087
060.20.0185: RNCC: 3 | RNVC: 2
300.064.250: RNCC: 5 | RNVC: 2

21 Nov 2008

5340-12-340-5453
Double Angle Bracket

123405453
5901423740: RNCC: 3 | RNVC: 2
5901423740: RNCC: 5 | RNVC: 2
5901423740: RNCC: 5 | RNVC: 2
590 142 37 40: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-197-2220
Angle Bracket

121972220
075-103022-432: RNCC: 3 | RNVC: 2

3 Oct 1983

5340-12-300-8434
Shimmy Damper

123008434
0009888910: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-189-4223
Mending Plate

121894223
CF 328 457: RNCC: 3 | RNVC: 2
CF328457: RNCC: 5 | RNVC: 2
CF328457: RNCC: 5 | RNVC: 2
CF 328 457: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-12-345-9365
Mortise Lock Set

123459365
234.64.208: RNCC: 3 | RNVC: 2

19 May 1998

5340-12-181-5450
Plain Solid Disk

121815450
CF 453 560: RNCC: 2 | RNVC: 2
CF 453 560: RNCC: 3 | RNVC: 2
CF 453 560: RNCC: 5 | RNVC: 2
CF453560: RNCC: 5 | RNVC: 2
CF 453 560: RNCC: 5 | RNVC: 2
CF453560: RNCC: 5 | RNVC: 2
CF453560: RNCC: 5 | RNVC: 2

30 Nov 1979

5340-12-392-8717
Mounting Bracket

123928717
L135M2901211: RNCC: 3 | RNVC: 2

18 Jul 2013

Load More Results