What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 36 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 36 of 178

5340-12-330-5404
Access Cover

123305404
551.264.24.00: RNCC: 3 | RNVC: 2
551 264 24 00: RNCC: 5 | RNVC: 2
5512642400: RNCC: 5 | RNVC: 2
145704: RNCC: 5 | RNVC: 2

6 Jan 1993

5340-12-323-8070
Door Button

123238070
K6583: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-12-337-9938
Angle Bracket

123379938
7125701: RNCC: 3 | RNVC: 2
EZ71257: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-312-7157
Mounting Bracket

123127157
1068941: RNCC: 2 | RNVC: 2
1068941: RNCC: 3 | RNVC: 2

29 Jan 1988

5340-12-335-0506
Angle Bracket

123350506
0048-204000A02B: RNCC: 2 | RNVC: 2
0048-204000A02B: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-12-328-9130
Bail Handle

123289130
043.638: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-342-1568
Mounting Bracket

123421568
536A08711: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-386-8351
Mounting Bracket

123868351
57253112: RNCC: 3 | RNVC: 2
CV190690: RNCC: 5 | RNVC: 2
57253112: RNCC: 5 | RNVC: 2

6 Oct 2011

5340-12-314-7168
Resilient Mount

123147168
2K22BAM40G1: RNCC: 3 | RNVC: 2
331952996: RNCC: 5 | RNVC: 2
2K22BAM40G1: RNCC: 5 | RNVC: 9

3 Aug 1988

5340-12-332-5487
Nut And Bolt Retainer

123325487
048-2100: RNCC: 3 | RNVC: 2

19 Aug 1993

5340-12-044-1506

5340-12-042-5722

5340-12-129-3876

5340-12-385-5215
Angle Bracket

123855215
4000008872: RNCC: 3 | RNVC: 2

10 Jun 2011

5340-12-340-2355
Retaining Strap

123402355
9224122: RNCC: 3 | RNVC: 2
25 359 1000 01 000: RNCC: 5 | RNVC: 2

16 Mar 1996

5340-12-362-7615
Door Handle

123627615
65613: RNCC: 3 | RNVC: 2

27 Mar 2004

5340-12-326-5640
Mounting Bracket

123265640
4209618402: RNCC: 3 | RNVC: 2

8 Oct 1991

5340-12-197-5150
Hasp Staple

121975150
4703-MMCH: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-12-356-5027
Mounting Bracket

123565027
3011R-302000.22: RNCC: 2 | RNVC: 2
3011R-302000.22: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-12-020-7460

5340-12-146-5917
Nonmetallic Bumper

121465917
4700054: RNCC: 3 | RNVC: 2
39314: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-360-3534
Loop Clamp

123603534
0009550620: RNCC: 3 | RNVC: 2
0009550620: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-326-6012
Retaining Strap

123266012
BSS2X22X25X3: RNCC: 3 | RNVC: 2

11 Oct 1991

5340-12-375-0028
Mounting Plate

123750028
454 6857-801: RNCC: 3 | RNVC: 2
454 6857-801: RNCC: 5 | RNVC: 2

11 Apr 2008

5340-12-352-4621
Compression Cup

123524621
536 480: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-310-9021
Mounting Bracket

123109021
5045001: RNCC: 3 | RNVC: 2

7 Jul 1987

5340-12-386-7440
Manual Control Handle

123867440
04341578: RNCC: 3 | RNVC: 2
04341578: RNCC: 5 | RNVC: 2
CV178629: RNCC: 5 | RNVC: 2

28 Sep 2011

5340-12-310-6189
Dust And Moisture Seal Protective Cap

123106189
570333577: RNCC: 3 | RNVC: 2
86001100032000: RNCC: 5 | RNVC: 2

10 Jun 1987

5340-12-353-9298
Pad Eye

123539298
16001465: RNCC: 3 | RNVC: 2

18 May 2001

5340-12-314-1474
Angle Bracket

123141474
027004904: RNCC: 3 | RNVC: 2

11 Jun 1988

5340-12-329-6434
Cane Bolt

123296434
590860-8450.000: RNCC: 2 | RNVC: 2
590860-8450.000: RNCC: 3 | RNVC: 2

12 Sep 1992

5340-12-360-1184
Threaded Rod End

123601184
8012.43.00: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-364-7788
Catch Strike

123647788
54.0084.172.07: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-157-2625
Loop Clamp

121572625
0951186001: RNCC: 3 | RNVC: 2
0986419000: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-369-0259
Cushioning Pad

123690259
23223-391100.02.0: RNCC: 2 | RNVC: 2
23223-391100.02.0: RNCC: 3 | RNVC: 2

15 May 2006

5340-12-145-6666

5340-12-308-5055
Angle Bracket

123085055
3815013020: RNCC: 3 | RNVC: 2

17 Oct 1986

5340-12-379-9570
Webbing Strap

123799570
121W162200.004.0: RNCC: 2 | RNVC: 2
121W162200.004.0: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-381-2748
Butt Hinge Leaf

123812748
6025181: RNCC: 3 | RNVC: 2

28 Jan 2010

5340-12-367-8350
Mounting Bracket

123678350
5500900741: RNCC: 3 | RNVC: 2

20 Oct 2005

5340-12-324-2766
Clamp Bolt Assembly

123242766
335948-8401.000: RNCC: 2 | RNVC: 2
335948-8401.000: RNCC: 3 | RNVC: 2
335948-8401.000: RNCC: 5 | RNVC: 9

1 Feb 1991

5340-12-300-6623
Elbow Catch

123006623
1000091-3420: RNCC: 2 | RNVC: 2
1000091-3420: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-163-2414
An Scharnierlappen

5340-12-136-4039

5340-12-334-1240
Loop Clamp

123341240
52532303103: RNCC: 3 | RNVC: 9

22 Mar 1994

5340-12-302-1427
Swivel Caster

123021427
501296: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-324-2417
Turnbuckle Body

123242417
199.193: RNCC: 3 | RNVC: 2
199193: RNCC: 5 | RNVC: 2

30 Jan 1991

5340-12-349-0632
Mounting Bracket

123490632
4460 365 064: RNCC: 3 | RNVC: 2
4460365064: RNCC: 5 | RNVC: 2

20 Sep 1999

5340-12-360-4104
Cushioning Pad

123604104
0009644623: RNCC: 3 | RNVC: 2
0009644623: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-333-7523
Mending Plate

123337523
15 0004 453: RNCC: 2 | RNVC: 2
15 0004 453: RNCC: 3 | RNVC: 2
150004453: RNCC: 5 | RNVC: 2

1 Feb 1994

5340-12-340-5788
Bow Handle

123405788
581A535: RNCC: 3 | RNVC: 2

7 May 1996

5340-12-354-2317
Mounting Bracket

123542317
04112400: RNCC: 3 | RNVC: 2

21 Jun 2001

5340-12-342-6174
Nonmetallic Bumper

123426174
601351: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-180-8570
Retaining Strap

121808570
CF420570: RNCC: 3 | RNVC: 2
CF 420 570: RNCC: 5 | RNVC: 2
CF 420 570: RNCC: 5 | RNVC: 2
CF420570: RNCC: 5 | RNVC: 2
CF 420 570: RNCC: 5 | RNVC: 2
CF420570: RNCC: 5 | RNVC: 2

8 Oct 1979

5340-12-151-1305
Retaining Strap

121511305
521D18721: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-384-9043
Manual Control Lever

123849043
F1.1787-30-10-00.50-00: RNCC: 3 | RNVC: 2

8 Apr 2011

5340-12-179-3812
Angle Bracket

121793812
5800828-1344-001: RNCC: 3 | RNVC: 2
5800828-1344.001: RNCC: 5 | RNVC: 2

27 Jun 1979

5340-12-182-3586
Resilient Mount

121823586
VG95446T05H001Z: RNCC: 2 | RNVC: 2
56025011: RNCC: 3 | RNVC: 2
313059: RNCC: 5 | RNVC: 2
C40165-A373-C133: RNCC: 5 | RNVC: 2
37G17-0045-02.001: RNCC: 5 | RNVC: 2

28 Jan 1980

5340-12-701-3416
Rod End Clevis

127013416
VG95211-ML-127013416: RNCC: 2 | RNVC: 2
5.12.5111.1500.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-354-0632
Nut And Bolt Retainer

123540632
PAN3137-12: RNCC: 3 | RNVC: 2

30 May 2001

5340-12-359-4344
Loop Clamp

123594344
DIN3016-1-E1-28X20-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-300-0908
Manual Control Handle

123000908
2536000: RNCC: 3 | RNVC: 2
2536K01: RNCC: 5 | RNVC: 2

30 Jun 1984

5340-12-368-2888
Retaining Strap

123682888
6.376-744.0: RNCC: 3 | RNVC: 2
G3 400 103 2211DT: RNCC: 5 | RNVC: 2

9 Feb 2006

5340-12-394-4477
Mounting Bracket

123944477
10165-183218.000.0: RNCC: 2 | RNVC: 2
10165-183218.000.0: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-12-344-2374
Access Cover

123442374
2500255-531430.000.0: RNCC: 2 | RNVC: 2
2500255-531430.000.0: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-12-004-0172

5340-12-004-3821

5340-12-004-2945

5340-12-161-4557
Retaining Strap

121614557
100332-10000.03: RNCC: 2 | RNVC: 2
100332-10000-03: RNCC: 5 | RNVC: 2
100332-10000.03: RNCC: 5 | RNVC: 2
100332-10000-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-9344
Metal Runner

123229344
702-141100-953-0: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-12-320-3516
Electrical-Mechanical Equipment Post

123203516
VG95148B5,5XM3X25-2.0380.30-E2A: RNCC: 2 | RNVC: 2
ABM 3055 25: RNCC: 3 | RNVC: 2
VG95148B5,5XM3X25-2.0380.30-E2A: RNCC: 3 | RNVC: 2
ABM 3055 25: RNCC: 5 | RNVC: 9

5 Jan 1990

5340-12-389-2464
Support Hook

123892464
9999261-161400.003.0: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-12-701-4720
Mounting Bracket

127014720
VG95211-ML-127014720: RNCC: 2 | RNVC: 2
5.12.5314.8310.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-1185
Loop Clamp

127011185
VG95211-ML-127011185: RNCC: 2 | RNVC: 2
4728A-18-18: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-302-6949
Angle Bracket

123026949
702732-0522.000: RNCC: 3 | RNVC: 2

23 Jan 1985

5340-12-319-3836
Bow Handle

123193836
C249-A13-C10: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-320-1029
Access Cover

123201029
C195-A101-C181: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-364-7671
Nonmetallic Bumper

123647671
27800-1060: RNCC: 3 | RNVC: 2
NLM27800-1060: RNCC: 5 | RNVC: 2

29 Oct 2004

5340-12-390-6171
Angle Bracket

123906171
SK1171-192482.003.0: RNCC: 3 | RNVC: 2
7116871: RNCC: 5 | RNVC: 2

28 Nov 2012

5340-12-340-6523
Mounting Bracket

123406523
8854 101-301: RNCC: 3 | RNVC: 2

18 May 1996

5340-12-359-2855
Angle Bracket

123592855
2500238-080700.003.0: RNCC: 3 | RNVC: 2

20 Jan 2003

5340-12-702-5528
Mounting Plate

127025528
VG95211-ML-127025528: RNCC: 2 | RNVC: 2
5.51.7220.0210.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-344-4049
Buckle

123444049
R51692: RNCC: 3 | RNVC: 2
R51692: RNCC: 5 | RNVC: 2

23 Oct 1997

5340-12-190-9390
Nonmetallic Bumper

121909390
4039875160: RNCC: 3 | RNVC: 2

23 Dec 1981

5340-12-363-8322
Antipilferage Seal Locking Wire

123638322
42.968.0042: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-12-321-7829
Mounting Plate

123217829
54.2322.718.04: RNCC: 2 | RNVC: 2
54.2322.718.04: RNCC: 3 | RNVC: 2

26 Jun 1990

5340-12-337-6450
Angle Bracket

123376450
10 0050 253: RNCC: 3 | RNVC: 2
100050253: RNCC: 5 | RNVC: 2

22 Mar 1995

5340-12-362-7649
Nonmetallic Bumper

123627649
S535M10X3001: RNCC: 3 | RNVC: 2

30 Mar 2004

5340-12-387-5840
Mounting Bracket

123875840
GE9101G529: RNCC: 3 | RNVC: 2

11 Jan 2012

5340-12-365-7093
Bow Handle

123657093
9438150436: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-361-4600
Rod End Clevis

123614600
189149601: RNCC: 2 | RNVC: 2
189149601: RNCC: 3 | RNVC: 2

6 Oct 2003

5340-12-322-2879
Extension Handle

123222879
9000 2098: RNCC: 3 | RNVC: 2

8 Aug 1990

5340-12-342-1123
Mechanic Equipment Hardware Kit

123421123
236 806: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-12-020-4842

5340-12-327-5033
Nonmetallic Bumper

123275033
11256561501: RNCC: 3 | RNVC: 2

28 Jan 1992

5340-12-354-0349
Spring Tension Clip

123540349
525175251: RNCC: 3 | RNVC: 2
52 517 5251: RNCC: 5 | RNVC: 2

29 May 2001

5340-12-326-4004
Angle Bracket

123264004
01TL30676: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-12-376-0552
Swivel Caster

123760552
3470PVR160P63: RNCC: 3 | RNVC: 2
4031582304237: RNCC: 5 | RNVC: 2

7 Aug 2008

5340-12-379-2969
Loop Clamp

123792969
0009957805: RNCC: 3 | RNVC: 2

10 Jul 2009

5340-12-146-7623
Federkraft- Klipp

5340-12-010-8472

5340-12-197-8083

5340-12-147-6822
Buegel- Griff

5340-12-147-6766
Abschlusz- Kappe

5340-12-010-8492

5340-12-148-2005
Retaining Strap

121482005
DIN1592-7BK: RNCC: 2 | RNVC: 2
DIN1592-7: RNCC: 3 | RNVC: 2
DIN1592-7BK: RNCC: 3 | RNVC: 2
DIN1592-78K: RNCC: 5 | RNVC: 2
DIN1592-7: RNCC: 5 | RNVC: 2
DIN1592-7: RNCC: 5 | RNVC: 2
7DIN1592: RNCC: 5 | RNVC: 2
DIN1592-7: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-342-4493
Webbing Strap

123424493
A 1326-2200: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-12-337-1507
Nonmetallic Bumper

123371507
VG95092B25X20X30X6,5X12NR60: RNCC: 2 | RNVC: 2
20/8-142.NR60: RNCC: 3 | RNVC: 2
20/8-142: RNCC: 3 | RNVC: 2
78 482: RNCC: 5 | RNVC: 2

25 Jan 1995

5340-12-368-8765
Metallic Bumper

123688765
2500298-198400.002.0: RNCC: 3 | RNVC: 2

3 May 2006

5340-12-387-4862
Mounting Bracket

123874862
V6520-06871-051: RNCC: 3 | RNVC: 2

29 Dec 2011

5340-12-199-0918
Spring Tension Clip

121990918
2300172-186210.013.0: RNCC: 2 | RNVC: 2
2300172-186210.013.0: RNCC: 3 | RNVC: 2
2300172-186210.013.0: RNCC: 3 | RNVC: 2
2300172-186210.013.0: RNCC: 5 | RNVC: 9

24 Mar 1984

5340-12-349-9030
Mounting Bracket

123499030
2500238-090000.001.0: RNCC: 2 | RNVC: 2
2500238-090000.001.0: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-12-390-3218
Bumper

123903218
9999261-392100.007.0: RNCC: 3 | RNVC: 2

30 Oct 2012

5340-12-374-8931
Multiple Angle Bracket

123748931
SK976-192461.001.0: RNCC: 3 | RNVC: 2
1729565: RNCC: 5 | RNVC: 9

3 Apr 2008

5340-12-340-0314
Snap Hook

123400314
DIN5299-A40-A4: RNCC: 2 | RNVC: 2
DIN5299-A40-1.4571: RNCC: 3 | RNVC: 2
DIN5299-A40-1.4571: RNCC: 5 | RNVC: 2

16 Feb 1996

5340-12-318-0643
Electrical-Mechanical Equipment Post

123180643
S36133-02-6-238: RNCC: 3 | RNVC: 2

8 Jun 1989

5340-12-349-2440
Dust And Moisture Seal Protective Cap

123492440
0009970420: RNCC: 3 | RNVC: 2
A 000 997 04 20: RNCC: 5 | RNVC: 9
000 997 04 20: RNCC: 5 | RNVC: 9

14 Oct 1999

5340-12-175-0163
Handle Grip

121750163
2-38403: RNCC: 3 | RNVC: 2

16 Aug 1978

5340-12-315-5446
Butt Hinge

123155446
5.23.253: RNCC: 3 | RNVC: 2

5 Nov 1988

5340-12-303-3262
Helical Compression Spring Seat

123033262
8376472: RNCC: 3 | RNVC: 2
8 376 472: RNCC: 5 | RNVC: 2
8 348 993 ITEM 55: RNCC: 5 | RNVC: 2
8 376 472: RNCC: 5 | RNVC: 2

14 Mar 1985

5340-12-305-2206
Catch Strike

123052206
3.100.03: RNCC: 3 | RNVC: 2
3206: RNCC: 5 | RNVC: 2

9 Oct 1985

5340-12-386-2766
Mounting Plate

123862766
2500262-531810.001.0: RNCC: 3 | RNVC: 2

22 Aug 2011

5340-12-388-3555
Spacing Threaded Standoff

123883555
3016R-340200.006.0: RNCC: 3 | RNVC: 2

14 Mar 2012

5340-12-198-0508
Bow Handle

121980508
81970010034: RNCC: 3 | RNVC: 2
5000254064: RNCC: 5 | RNVC: 2

14 Dec 1983

5340-12-368-5463
Spring Tension Clip

123685463
137002000005: RNCC: 3 | RNVC: 2

23 Mar 2006

5340-12-179-2442
Mending Plate

121792442
2481601: RNCC: 3 | RNVC: 2

18 Jun 1979

5340-12-314-5442
Angle Bracket

123145442
4244261740: RNCC: 3 | RNVC: 2
424 426 17 40: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-313-1877
Strap Hinge

123131877
6010092: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-12-357-9159
Mending Plate

123579159
2300042-255621.001: RNCC: 2 | RNVC: 2
2300042-255621.001: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-342-5413
Dust And Moisture Seal Protective Plug

123425413
GPN700M14X1: RNCC: 3 | RNVC: 2
700M14X1: RNCC: 5 | RNVC: 2

25 Feb 1997

5340-12-305-3434
Nonmetallic Bumper

123053434
RP969081/1: RNCC: 3 | RNVC: 2

24 Oct 1985

5340-12-091-0927

5340-12-141-7653

5340-12-307-4019
Electrical-Mechanical Equipment Post

123074019
DA8-M4X10: RNCC: 3 | RNVC: 2

12 Jun 1986

5340-12-384-6812
Mounting Bracket

123846812
866410423: RNCC: 3 | RNVC: 2

18 Mar 2011

5340-12-340-5508
Retaining Clip

123405508
4644 306 388: RNCC: 3 | RNVC: 2
4644306388: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-353-4913
Access Cover

123534913
5060100026: RNCC: 3 | RNVC: 2
506 010 00 26: RNCC: 5 | RNVC: 2

30 Mar 2001

5340-12-319-4803
Mounting Bracket

123194803
504672: RNCC: 3 | RNVC: 2
504672: RNCC: 3 | RNVC: 2

5 Oct 1989

5340-12-335-5353
Retaining Strap

123355353
1074920140: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-12-318-1078
Mounting Bracket

123181078
4615401173: RNCC: 3 | RNVC: 2

13 Jun 1989

5340-12-314-0412
Angle Bracket

123140412
6202920140: RNCC: 3 | RNVC: 2
620 292 01 40: RNCC: 5 | RNVC: 2

1 Jun 1988

5340-12-391-3387
Mounting Bracket

123913387
9999015-061170.003.0: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-12-328-2634
Mending Plate

123282634
2300232-208000.001.0: RNCC: 2 | RNVC: 2
2300232-208000.001.0: RNCC: 3 | RNVC: 2

30 Apr 1992

5340-12-308-0973
Electrical-Mechanical Equipment Post

123080973
VG95148C7XM4X19,7-NRST: RNCC: 2 | RNVC: 2
VG95148C7XM4X19,7-NRST: RNCC: 3 | RNVC: 2
KMS013-212000.006.0: RNCC: 3 | RNVC: 2

2 Sep 1986

5340-12-339-6247
Hand Crank

123396247
VG85086-B-150X12-AM: RNCC: 2 | RNVC: 2
9-45146-02-05: RNCC: 5 | RNVC: 2
B150-12VG85086RG5: RNCC: 5 | RNVC: 2
B150X12VG85086-RG5: RNCC: 5 | RNVC: 2

13 Dec 1995

5340-12-320-3030
Dust And Moisture Seal Protective Cap

123203030
1120524005: RNCC: 3 | RNVC: 2
0128 7642: RNCC: 5 | RNVC: 2
01287642EE8896-70: RNCC: 5 | RNVC: 2

29 Dec 1989

5340-12-701-1754
Mounting Bracket

127011754
VG95211-ML-127011754: RNCC: 2 | RNVC: 2
5.12.0246.0130.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-360-8347
Double Angle Bracket

123608347
78350 11123: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-12-357-1597
Mounting Bracket

123571597
8711591240: RNCC: 3 | RNVC: 2

14 May 2002

5340-12-357-0087
Mounting Bracket

123570087
8812370740: RNCC: 2 | RNVC: 2
8812370740: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-350-4378
Section Block Clamp

123504378
JN0413G26: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-309-6577
Metal Runner

123096577
30113-586: RNCC: 3 | RNVC: 2

13 Feb 1987

5340-12-184-4258
Resilient Mount

121844258
DIN95363-A20X15-M6X11-M6X15NR55: RNCC: 4 | RNVC: 1
058-00179: RNCC: 5 | RNVC: 2
05800179: RNCC: 5 | RNVC: 2
500021-M6X11-M6X15.NR55.ST: RNCC: 5 | RNVC: 2
VG95363-A20X15-M6X11-M6X15NR55ST: RNCC: 5 | RNVC: 9

24 Jul 1980

5340-12-701-4305
Loop Clamp

127014305
VG95211-ML-127014305: RNCC: 2 | RNVC: 2
5.12.5312.8010.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-4565
Loop Clamp

127014565
VG95211-ML-127014565: RNCC: 2 | RNVC: 2
5.12.5314.1030.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-303-2908
Double Angle Bracket

123032908
4900189-210000.04: RNCC: 2 | RNVC: 2
2-09.039: RNCC: 3 | RNVC: 2
4900189-210000.04: RNCC: 3 | RNVC: 2
4900189-210000.04: RNCC: 3 | RNVC: 2
4900189-210000.04: RNCC: 5 | RNVC: 2
4900189-210000.04: RNCC: 5 | RNVC: 9

13 Mar 1985

5340-12-346-5634
Mounting Plate

123465634
2300348-186210.014.0: RNCC: 2 | RNVC: 2
2300348-186210.014.0: RNCC: 3 | RNVC: 2
1809386: RNCC: 5 | RNVC: 2

11 Aug 1998

5340-12-321-9885
Resilient Mount

123219885
H95-216-74-90-8MM: RNCC: 3 | RNVC: 2

16 Jul 1990

5340-12-326-8284
Runner

123268284
111A408B02.4: RNCC: 2 | RNVC: 2
111A408B02.4: RNCC: 3 | RNVC: 2
302140-0461.01: RNCC: 5 | RNVC: 2

30 Oct 1991

5340-12-319-3279
Access Cover

123193279
1000192-03 2 42000: RNCC: 2 | RNVC: 2
1000192-03 2 42000: RNCC: 3 | RNVC: 2
1000192-03 2 42000: RNCC: 5 | RNVC: 9
10003-03 2 42000: RNCC: 5 | RNVC: 9
10003-03 2 42000: RNCC: 5 | RNVC: 9

25 Sep 1989

5340-12-178-3626
Pad Eye

121783626
160-25030-104: RNCC: 3 | RNVC: 2
160-25030-104: RNCC: 5 | RNVC: 9

17 Apr 1979

5340-12-158-9666
Dust And Moisture Seal Protective Cap

121589666
250/27: RNCC: 3 | RNVC: 2
250002700: RNCC: 5 | RNVC: 2
250-27: RNCC: 5 | RNVC: 2
250-27GPN250: RNCC: 5 | RNVC: 2
GPN250/27: RNCC: 5 | RNVC: 2
GPN250-27: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-385-6189
Mounting Bracket

123856189
X00020941: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-12-316-9993
Mending Plate

123169993
2300279-9840.09: RNCC: 2 | RNVC: 2
2300279-9840.09: RNCC: 5 | RNVC: 2
9876292: RNCC: 5 | RNVC: 9
2300279-9840.09: RNCC: 5 | RNVC: 9

2 Mar 1989

5340-12-316-4711
Mounting Bracket

123164711
54.0026.262.00: RNCC: 3 | RNVC: 2
54002626200: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-146-0270
Retaining Clip

121460270
6126620: RNCC: 3 | RNVC: 2
6155300: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-026-2937

5340-12-382-1626
Mounting Bracket

123821626
X52320300002: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-351-6139
Webbing Strap

123516139
7802494692: RNCC: 3 | RNVC: 2
78024 94692: RNCC: 5 | RNVC: 9

8 Aug 2000

5340-12-351-1823
Mounting Plate

123511823
2300387-403010.000: RNCC: 2 | RNVC: 2
9907350: RNCC: 3 | RNVC: 2
9907350: RNCC: 5 | RNVC: 9
2300387-403010.000: RNCC: 5 | RNVC: 9

29 Jun 2000

5340-12-315-6846
Helical Compression Spring Retainer

123156846
4139 320 005: RNCC: 3 | RNVC: 2
4139320005: RNCC: 5 | RNVC: 9

19 Nov 1988

5340-12-357-8915
Mounting Bracket

123578915
2300042-255281.006: RNCC: 2 | RNVC: 2
2300042-255281.006: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-12-135-7261

5340-12-190-0457
Handwheel

121900457
29280-50X5: RNCC: 3 | RNVC: 2

4 Nov 1981

5340-12-345-4469
Mounting Bracket

123454469
54.0053.448.14: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-12-332-6975
Loop Clamp

123326975
6911000001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-12-352-0524
Access Cover

123520524
54.0056.010.09: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-12-373-1937
Retaining Strap

123731937
1809950022: RNCC: 3 | RNVC: 2
180 995 00 22: RNCC: 5 | RNVC: 2

9 Oct 2007

5340-12-175-8568
Retaining Strap

121758568
81974010579: RNCC: 3 | RNVC: 2

23 Oct 1978

5340-12-184-0476
Nonmetallic Bumper

121840476
100074: RNCC: 3 | RNVC: 2

19 Jun 1980

5340-12-367-8357
Mounting Plate

123678357
5551750441: RNCC: 3 | RNVC: 2

20 Oct 2005

5340-12-392-6656
Strap Fastener Loop

123926656
08000818: RNCC: 3 | RNVC: 2
08000818: RNCC: 5 | RNVC: 2

27 Jun 2013

5340-12-362-8220
Mounting Plate

123628220
2914640051: RNCC: 3 | RNVC: 2

3 Apr 2004

5340-12-343-6418
Mit Abstandsstueck

5340-12-340-4024
Mounting Bracket

123404024
87-401.10-04.06-00: RNCC: 3 | RNVC: 2

5 Apr 1996

5340-12-361-2130
Multiple Angle Bracket

123612130
J92228231-001: RNCC: 3 | RNVC: 2

4 Sep 2003

5340-12-384-9740
Rod End Clevis

123849740
160-88553-01: RNCC: 3 | RNVC: 2
15160-88553.01: RNCC: 5 | RNVC: 2

14 Apr 2011

5340-12-194-5249
Mending Plate

121945249
20-5180-072: RNCC: 3 | RNVC: 2

12 Nov 1982

5340-12-316-1499
Nonmetallic Bumper

123161499
PV-80-44: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-313-0190
Angle Bracket

123130190
P-086148-413: RNCC: 3 | RNVC: 2
P086148-413: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-339-3017
Access Cover

123393017
2300223-207220.02.0: RNCC: 2 | RNVC: 2
2300223-207220.02.0: RNCC: 3 | RNVC: 2
23 00 223-207 220-02.0: RNCC: 5 | RNVC: 2
A4-248.052-82: RNCC: 5 | RNVC: 2
3000008-207220.02.0: RNCC: 5 | RNVC: 2

7 Nov 1995

5340-12-196-3027
Electronic Equipment Hardware Kit

121963027
5801999-350000.00: RNCC: 2 | RNVC: 2
5801999-350000.00: RNCC: 3 | RNVC: 2
5801999-350000.00: RNCC: 3 | RNVC: 2
2-09.028: RNCC: 3 | RNVC: 2
5801999-350000.00: RNCC: 5 | RNVC: 2
5801999-350000.00: RNCC: 5 | RNVC: 9
5801999-350000.00: RNCC: 5 | RNVC: 9

27 Jun 1983

5340-12-323-5082
Angle Bracket

123235082
1161335: RNCC: 3 | RNVC: 2
4003./24.68/62: RNCC: 5 | RNVC: 2
4003.124.68.00.062: RNCC: 5 | RNVC: 2
1161335: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-170-5222
Loop Clamp

121705222
HNY6V: RNCC: 3 | RNVC: 2
211-65069: RNCC: 5 | RNVC: 2
H-NY 6V: RNCC: 5 | RNVC: 2
12H4310: RNCC: 5 | RNVC: 2
203006101: RNCC: 5 | RNVC: 9

20 Jul 1977

5340-12-346-6274
Access Cover

123466274
7632115.0.E: RNCC: 3 | RNVC: 2

18 Aug 1998

5340-12-335-8611
Nonmetallic Bumper

123358611
104-511000-906-0: RNCC: 2 | RNVC: 2
104-511000-906-0: RNCC: 3 | RNVC: 2

26 Sep 1994

5340-12-359-6030
Mounting Plate

123596030
9429940009: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-384-8309
Mending Plate

123848309
11003585: RNCC: 3 | RNVC: 2
290 07451: RNCC: 5 | RNVC: 2
29007451: RNCC: 5 | RNVC: 2

1 Apr 2011

5340-12-302-2568
Mending Plate

123022568
6214911341: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-025-3146

5340-12-180-1699
Bow Handle

121801699
81420305072: RNCC: 3 | RNVC: 2
81.42030.5072: RNCC: 5 | RNVC: 2
D 6090.410.0: RNCC: 5 | RNVC: 2
23230-221609.000.0: RNCC: 5 | RNVC: 9
23230-221609.000.0: RNCC: 5 | RNVC: 9
23230-221609-000-0: RNCC: 5 | RNVC: 9

27 Aug 1979

5340-12-386-6040
Access Cover

123866040
2500262-736110.001.0: RNCC: 2 | RNVC: 2
2500262-736110.001.0: RNCC: 3 | RNVC: 2

15 Sep 2011

5340-12-362-1491
Bridge Clamp

123621491
00.076.330.9: RNCC: 3 | RNVC: 2

15 Jan 2004

5340-12-390-0825
Angle Bracket

123900825
DF 105 044 A: RNCC: 3 | RNVC: 2
DF 105 044 A: RNCC: 5 | RNVC: 2

2 Oct 2012

5340-12-386-0126
Retaining Clip

123860126
2481-395822.001.0: RNCC: 3 | RNVC: 2

29 Jul 2011

5340-12-314-5707
Mending Plate

123145707
935928777: RNCC: 3 | RNVC: 2

20 Jul 1988

5340-12-131-5584

5340-12-322-9968
Manual Control Handle

123229968
61312300388: RNCC: 3 | RNVC: 9

16 Oct 1990

5340-12-316-6748
Dust And Moisture Seal Protective Cap

123166748
5800777-8620.01: RNCC: 2 | RNVC: 2
5800777-8620.01: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-314-5963
Resilient Mount

123145963
2K22BAM10G1: RNCC: 3 | RNVC: 2
3319.52201: RNCC: 5 | RNVC: 2
2K22BAM10G1: RNCC: 5 | RNVC: 9

21 Jul 1988

5340-12-360-0989
Angle Bracket

123600989
9424293168: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-342-0067
Angle Bracket

123420067
8370701240: RNCC: 2 | RNVC: 2
8370701240: RNCC: 3 | RNVC: 2

29 Nov 1996

5340-12-348-9260
Mounting Bracket

123489260
245/7346-46-27-00: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-12-702-1641
Mounting Bracket

127021641
VG95211-ML-127021641: RNCC: 2 | RNVC: 2
30.6602.30: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-346-6374
Nonmetallic Bumper

123466374
5-612-2453: RNCC: 3 | RNVC: 2

19 Aug 1998

5340-12-346-3403
Mending Plate

123463403
U100-2220-006: RNCC: 3 | RNVC: 2

14 Jul 1998

5340-12-394-1932
Rod End Connector

123941932
109048-00101: RNCC: 3 | RNVC: 2

11 Nov 2013

5340-12-156-6500
Resilient Mount

121566500
DIN95369-A2-4-CR-NMST: RNCC: 2 | RNVC: 2
151003-M10-CR.AM-70: RNCC: 5 | RNVC: 2
C1050G: RNCC: 5 | RNVC: 2
60-101-070 A: RNCC: 5 | RNVC: 2
550-0433: RNCC: 5 | RNVC: 2
C1050AG: RNCC: 5 | RNVC: 2
550-0433: RNCC: 5 | RNVC: 2
VG95369-A2-4-CR-NMST: RNCC: 5 | RNVC: 9
550-0433: RNCC: 5 | RNVC: 9
C1050AG: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-381-7635
Webbing Strap

123817635
5-912-133: RNCC: 3 | RNVC: 2

29 Mar 2010

5340-12-317-6147
Angle Bracket

123176147
P-296819-061: RNCC: 3 | RNVC: 2
P296819-061: RNCC: 5 | RNVC: 2

21 Apr 1989

5340-12-365-3321
Butt Hinge Leaf

123653321
2500267-192400.001.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-702-0301
Loop Clamp

127020301
VG95211-ML-127020301: RNCC: 2 | RNVC: 2
2271A-5: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-325-5498
Handle Grip

123255498
2015400183: RNCC: 3 | RNVC: 2

17 Jun 1991

5340-12-337-7684
Angle Bracket

123377684
460 616 01 12: RNCC: 3 | RNVC: 2
S 721 1 62 055 1: RNCC: 3 | RNVC: 9
4606160112: RNCC: 5 | RNVC: 2

10 Apr 1995

5340-12-169-2034
Handle Grip

121692034
CF409742B: RNCC: 3 | RNVC: 2
CF 409 742 A: RNCC: 5 | RNVC: 2
CF409742B: RNCC: 5 | RNVC: 2
CF 409 742 B: RNCC: 5 | RNVC: 2
CF409742A: RNCC: 5 | RNVC: 2
CF409742A: RNCC: 5 | RNVC: 2
CF409742B: RNCC: 5 | RNVC: 2
CF 409 742 A: RNCC: 5 | RNVC: 2
CF 409 742 B: RNCC: 5 | RNVC: 2
CF409742A: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-349-6208
Helical Compression Spring Seat

123496208
11 34 1 342 971: RNCC: 3 | RNVC: 2

9 Dec 1999

5340-12-344-0751
Access Cover

123440751
536519-8819.000: RNCC: 2 | RNVC: 2
536519-8819.000: RNCC: 3 | RNVC: 2

8 Sep 1997

5340-12-331-3082
Rod End Clevis

123313082
81437400130: RNCC: 3 | RNVC: 2
81.43740.0130: RNCC: 5 | RNVC: 2

21 Apr 1993

5340-12-341-2037
Grooved Clamp Coupling

123412037
GC 201 013 -U: RNCC: 3 | RNVC: 2
GC 301 013 -U: RNCC: 5 | RNVC: 2
GC 301 013-U: RNCC: 5 | RNVC: 2
272.981 711 FZ-1: RNCC: 5 | RNVC: 2
GC 201 013-U: RNCC: 5 | RNVC: 2

8 Aug 1996

5340-12-362-8338
Mounting Bracket

123628338
BD5.100.134.560: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-12-327-4532
Metallic Bumper

123274532
1350.6.5.35.439: RNCC: 3 | RNVC: 2

23 Jan 1992

5340-12-388-7692
Mounting Plate

123887692
601250-202400.01: RNCC: 2 | RNVC: 2
601250-202400.01: RNCC: 3 | RNVC: 2

20 Apr 2012

5340-12-360-7725
Access Cover

123607725
2500305-183590.000.0: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-701-2620
Mounting Bracket

127012620
VG95211-ML-127012620: RNCC: 2 | RNVC: 2
5.12.4207.1030.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7332
Mounting Bracket

127017332
VG95211-ML-127017332: RNCC: 2 | RNVC: 2
5.12.7608.2370.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-192-9090
Access Cover

121929090
32.2.457.0001: RNCC: 3 | RNVC: 2
32-2-457-0001: RNCC: 5 | RNVC: 2

3 Jun 1982

5340-12-304-7965
Angle Bracket

123047965
033-341000-06-0: RNCC: 3 | RNVC: 2
033-341000-06-0: RNCC: 5 | RNVC: 9

26 Aug 1985

5340-12-331-7131
Resilient Mount Adapter

123317131
302140-0131.001.0: RNCC: 3 | RNVC: 2

14 Jun 1993

5340-12-330-4228
Mounting Bracket

123304228
2300262-181000.006.0: RNCC: 2 | RNVC: 2
2300262-181000.006.0: RNCC: 3 | RNVC: 2

11 Dec 1992

5340-12-349-9203
Mounting Bracket

123499203
2500238-080400.001.0: RNCC: 2 | RNVC: 2
2500238-080400.001.0: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-12-159-2815
Electrical-Mechanical Equipment Post

121592815
75-253-0510: RNCC: 3 | RNVC: 2
5253SZ10: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-145-0011
Loop Clamp

121450011
63TAN15801-3-1364-5: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-198-1922
Spring Loaded Cylinder Fastener

121981922
1423521014: RNCC: 3 | RNVC: 2
1423521014: RNCC: 5 | RNVC: 2
VDPM00746: RNCC: 5 | RNVC: 2
01288777EY0147-17: RNCC: 5 | RNVC: 2
0128 8777: RNCC: 5 | RNVC: 2

28 Dec 1983

5340-12-324-5280
Snap Hook

123245280
TK-SG15-4220-032: RNCC: 2 | RNVC: 2
TK-SG 15-4220-032-03: RNCC: 3 | RNVC: 2
204 123: RNCC: 5 | RNVC: 2
610 040: RNCC: 5 | RNVC: 2

26 Feb 1991

5340-12-318-8843
Mounting Bracket

123188843
2654-331800.02: RNCC: 2 | RNVC: 2
2654-331800.02: RNCC: 3 | RNVC: 2
2654-331 800.02: RNCC: 5 | RNVC: 9
679-01000400.02: RNCC: 5 | RNVC: 9
679-01000400.02: RNCC: 5 | RNVC: 9

23 Aug 1989

5340-12-355-7435
Mounting Bracket

123557435
P-876375-002: RNCC: 3 | RNVC: 2
P876375-002: RNCC: 5 | RNVC: 2

12 Dec 2001

5340-12-321-5901
Mounting Bracket

123215901
P-886788-401: RNCC: 3 | RNVC: 2
P886788-401: RNCC: 5 | RNVC: 2

6 Jun 1990

5340-12-701-6326
Mounting Plate

127016326
VG95211-ML-127016326: RNCC: 2 | RNVC: 2
5.12.7060.1110.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-9553
Double Angle Bracket

121969553
A-295061-401: RNCC: 3 | RNVC: 2
A295061-401: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-301-2019
Angle Bracket

123012019
A-295136-003: RNCC: 3 | RNVC: 2
A295136-003: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-359-3428
Detent Plunger

123593428
07144-110: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-357-8144
Double Angle Bracket

123578144
2300042-255262.000: RNCC: 2 | RNVC: 2
9941627: RNCC: 3 | RNVC: 2
2300042-255262.000: RNCC: 5 | RNVC: 2

29 Jul 2002

5340-12-386-5801
Mounting Plate

123865801
T652M1001201: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-328-6736
Resilient Mount

123286736
701199201D: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-385-3527
Bumper

123853527
S259M1034210: RNCC: 3 | RNVC: 2

25 May 2011

5340-12-375-1187
Angle Bracket

123751187
947168477: RNCC: 3 | RNVC: 2

23 Apr 2008

5340-12-371-8752
Multiple Angle Bracket

123718752
7103692: RNCC: 3 | RNVC: 2
7093798: RNCC: 5 | RNVC: 2

24 May 2007

5340-12-380-0087
Snap Hook

123800087
3195-40.A02: RNCC: 3 | RNVC: 2

18 Sep 2009

5340-12-353-9264
Self-Locking Insert

123539264
0009940042: RNCC: 3 | RNVC: 2

18 May 2001

5340-12-050-2952

5340-12-365-0706
Mounting Bracket

123650706
4615452140: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-175-0436
Loop Clamp

121750436
LN9491BM18: RNCC: 2 | RNVC: 2

21 Aug 1978

5340-12-359-7516
Dust And Moisture Seal Protective Plug

123597516
S281M6005211: RNCC: 3 | RNVC: 2

7 Mar 2003

5340-12-337-3904
Plug Button

123373904
04048600: RNCC: 3 | RNVC: 2
04048600.874: RNCC: 5 | RNVC: 2

22 Feb 1995

5340-12-375-6309
Spring Tension Clip

123756309
017808001: RNCC: 3 | RNVC: 2
0019952765: RNCC: 5 | RNVC: 2

19 Jun 2008

5340-12-180-0575
Webbing Strap

121800575
3818600094: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-346-2607
Angle Bracket

123462607
55.2502.109.41: RNCC: 3 | RNVC: 2

3 Jul 1998

5340-12-147-9150
Angle Bracket

121479150
259052: RNCC: 3 | RNVC: 2
3318146KZ0154-46: RNCC: 5 | RNVC: 2
0331 8146: RNCC: 5 | RNVC: 2
259052A3: RNCC: 5 | RNVC: 2
3318146: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-329-9082
Spring Tension Clip

123299082
C22156-A1200-C232: RNCC: 3 | RNVC: 2

10 Oct 1992

5340-12-702-4074
Mounting Bracket

127024074
VG95211-ML-127024074: RNCC: 2 | RNVC: 2
5.12.6102.0014.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-157-8963
Spring Tension Clip

121578963
001-202.100-004: RNCC: 3 | RNVC: 2
001-202-100-004: RNCC: 5 | RNVC: 9
1202-1000-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-4146
Mounting Bracket

121784146
2300109-034300.003.0: RNCC: 2 | RNVC: 2
2300109-034300.003.0: RNCC: 3 | RNVC: 2
2300109-034300-003-0: RNCC: 3 | RNVC: 2
2300109-034300-003-0: RNCC: 5 | RNVC: 2
2300109-034300.003.0: RNCC: 5 | RNVC: 9
2300109-034300-003-0: RNCC: 5 | RNVC: 9

20 Apr 1979

5340-12-346-1758
Mending Plate

123461758
03920000: RNCC: 3 | RNVC: 2

23 Jun 1998

5340-12-091-0902

5340-12-321-9478
Filler Opening Cap

123219478
0004715130: RNCC: 3 | RNVC: 9

11 Jul 1990

5340-12-199-3147
Angle Bracket

121993147
2500082-282910.00.0: RNCC: 2 | RNVC: 2
2500082-282910-00-0: RNCC: 3 | RNVC: 2

11 Apr 1984

5340-12-348-9111
Retaining Band

123489111
245/9713-17-11-00: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-327-1329
Angle Bracket

123271329
M514285: RNCC: 3 | RNVC: 9
M514285: RNCC: 5 | RNVC: 2

5 Dec 1991

5340-12-351-2247
Rim Latch

123512247
2500113-2320.02: RNCC: 2 | RNVC: 2
2500113-2320.02: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-321-8754
Mounting Bracket

123218754
90-SKS-187: RNCC: 2 | RNVC: 2
90-SKS-187: RNCC: 3 | RNVC: 2
90-SKS-187: RNCC: 5 | RNVC: 9

5 Jul 1990

5340-12-324-4528
Mounting Bracket

123244528
VY906564-12: RNCC: 3 | RNVC: 2
VY3.068-12: RNCC: 5 | RNVC: 2

18 Feb 1991

5340-12-381-4498
Angle Bracket

123814498
5240910195: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-12-346-7517
Plug Button

123467517
2039.0113: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-380-1809
Loop Clamp

123801809
6889957301: RNCC: 3 | RNVC: 2

5 Oct 2009

5340-12-381-3167
Dust And Moisture Seal Protective Plug

123813167
09404041: RNCC: 3 | RNVC: 2
Y00013547: RNCC: 5 | RNVC: 2

1 Feb 2010

5340-12-360-0877
Mounting Plate

123600877
T521M0201225: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-311-5343
Swivel Caster

123115343
WW 418 183: RNCC: 3 | RNVC: 9

15 Sep 1987

5340-12-344-2241
Butt Hinge

123442241
10027001: RNCC: 3 | RNVC: 2
10-3-510260-01-0: RNCC: 5 | RNVC: 2
GA 90 964 0553: RNCC: 5 | RNVC: 2

1 Oct 1997

5340-12-347-8715
Blank Panel

123478715
409065874: RNCC: 3 | RNVC: 2
409-065 874: RNCC: 5 | RNVC: 2
5L.6097.014.27: RNCC: 5 | RNVC: 2

1 Mar 1999

5340-12-162-4303
Rod End Connector

121624303
5800359-010330-10: RNCC: 3 | RNVC: 2
5800359-010330-10: RNCC: 5 | RNVC: 9
5800359-010330.10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-387-5866
Spacing Threaded Standoff

123875866
X51620500001: RNCC: 3 | RNVC: 2
XZ51120500001: RNCC: 5 | RNVC: 2

11 Jan 2012

5340-12-189-1907
Dust And Moisture Seal Protective Plug

121891907
600B625: RNCC: 3 | RNVC: 2
80.10.77: RNCC: 3 | RNVC: 2
062 737: RNCC: 5 | RNVC: 2
062737: RNCC: 5 | RNVC: 2
GPN600B625: RNCC: 5 | RNVC: 2
GPN600.B625: RNCC: 5 | RNVC: 9
600062500: RNCC: 5 | RNVC: 9
80 10 77: RNCC: 5 | RNVC: 9
GPN600,B625: RNCC: 5 | RNVC: 9

9 Sep 1981

5340-12-355-1545
Angle Bracket

123551545
1603295-3600: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-12-315-3547
Sealing Plug Assembly

123153547
1463203346: RNCC: 3 | RNVC: 2

14 Oct 1988

5340-12-307-3723
Helical Compression Spring Seat

123073723
03018510: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-12-305-3784
Dust And Moisture Seal Protective Plug

123053784
P-730002-405-32H-001-149K: RNCC: 3 | RNVC: 2

29 Oct 1985

5340-12-195-8104
Mending Plate

121958104
P-145350-076: RNCC: 3 | RNVC: 2
P145350-076: RNCC: 5 | RNVC: 2

19 Apr 1983

5340-12-194-5044
Resilient Mount

121945044
B22-BBM-5: RNCC: 3 | RNVC: 2
21674-001: RNCC: 5 | RNVC: 2
B 22 BBM-5,0: RNCC: 5 | RNVC: 9
B22-BBM-5: RNCC: 5 | RNVC: 9

10 Nov 1982

5340-12-344-3757
Mounting Bracket

123443757
A-296855-001: RNCC: 3 | RNVC: 2
A296855-001: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-315-8577
Access Cover

123158577
151-142100-903-0: RNCC: 3 | RNVC: 2
3787127EE3138-99: RNCC: 5 | RNVC: 2

2 Dec 1988

5340-12-701-7028
Mounting Plate

127017028
VG95211-ML-127017028: RNCC: 2 | RNVC: 2
5.12.7240.1840.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-348-1593
Mounting Bracket

123481593
7003740: RNCC: 3 | RNVC: 2

26 Apr 1999

5340-12-393-8227
Section Block Clamp

123938227
T290M2202282: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-12-390-0521
Mechanic Equipment Hardware Kit

123900521
105-86071: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-370-5170
Double Angle Bracket

123705170
7803203806AA: RNCC: 3 | RNVC: 2

16 Nov 2006

5340-12-308-7415
Bow Handle

123087415
86002570: RNCC: 3 | RNVC: 2

12 Nov 1986

5340-12-349-2554
Mending Plate

123492554
A1Z10275571: RNCC: 2 | RNVC: 2
A1Z10275571: RNCC: 3 | RNVC: 2
20352486: RNCC: 5 | RNVC: 2

18 Oct 1999

5340-12-378-2920
Loop Clamp

123782920
5559130: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-12-138-4530

5340-12-128-6543

5340-12-026-7040

5340-12-392-4018
Mechanical Stop

123924018
25573: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-12-050-2967

5340-12-196-4238
Electrical-Mechanical Equipment Post

121964238
35757-001: RNCC: 3 | RNVC: 2
35 757-001: RNCC: 5 | RNVC: 9

6 Jul 1983

5340-12-128-8292
Halter

121288292
26-14-92-02: RNCC: 3 | RNVC: 2
26-14-92-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-6012
Mounting Bracket

123596012
15871701: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-027-7067

5340-12-391-6817
Double Angle Bracket

123916817
4414311440: RNCC: 3 | RNVC: 2

26 Mar 2013

5340-12-388-7569
Dust And Moisture Seal Protective Cap

123887569
2304371: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-174-1201
Schluessel

121741201
HUF09-015-701-3DA207: RNCC: 3 | RNVC: 2
09-015-701-3DA207: RNCC: 5 | RNVC: 2
0160751: RNCC: 5 | RNVC: 2
160751: RNCC: 5 | RNVC: 9

6 Jun 1978

5340-12-340-0843
Spacing Threaded Standoff

123400843
2W132D002-2000.09: RNCC: 2 | RNVC: 2
2W132D002-2000.09: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-702-2149
Retaining Bail

127022149
VG95211-ML-127022149: RNCC: 2 | RNVC: 2
30.7222.1045: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-340-1901
Access Cover

123401901
463-223011.000: RNCC: 3 | RNVC: 9
9896435: RNCC: 5 | RNVC: 9

13 Mar 1996

5340-12-175-1133
Dust And Moisture Seal Protective Cap

121751133
AFG012585: RNCC: 3 | RNVC: 2
AFG18-01-00-00-20: RNCC: 5 | RNVC: 2

23 Aug 1978

5340-12-328-6433
Mending Plate

123286433
160-24570-61: RNCC: 3 | RNVC: 2
160-24570.61: RNCC: 5 | RNVC: 2
160-24570-61: RNCC: 5 | RNVC: 2
160-24570.61: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-12-371-4836
Spring Tension Clip

123714836
13588: RNCC: 3 | RNVC: 2
81626400092: RNCC: 5 | RNVC: 2
81.62640-0092: RNCC: 5 | RNVC: 2
81.62640.0092: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-12-192-8937
Access Cover

121928937
4618270040: RNCC: 3 | RNVC: 2
721 1 86 069 1: RNCC: 5 | RNVC: 9

3 Jun 1982

5340-12-390-4712
Padlock

123904712
180IB/50: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-12-375-7672
Bumper

123757672
5530780338: RNCC: 3 | RNVC: 2

3 Jul 2008

5340-12-316-2931
Mending Plate

123162931
5184684: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-338-9592
Electronic Equipment Hardware Kit

123389592
8 697 222 691: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-12-346-0208
Mounting Bracket

123460208
23176-262453.00.0: RNCC: 3 | RNVC: 2

29 May 1998

5340-12-174-9901
Handle Grip

121749901
23356-7: RNCC: 3 | RNVC: 2
23356-7: RNCC: 3 | RNVC: 9

15 Aug 1978

5340-12-371-5824
Multiple Angle Bracket

123715824
2300495-970400.007.0: RNCC: 3 | RNVC: 2
1715618: RNCC: 5 | RNVC: 9

20 Apr 2007

5340-12-373-1582
Block Clamp

123731582
RBP8-428: RNCC: 3 | RNVC: 2
RBP8-428: RNCC: 5 | RNVC: 2

4 Oct 2007

5340-12-390-7930
Dust And Moisture Seal Protective Cap

123907930
04-00072: RNCC: 3 | RNVC: 2

12 Dec 2012

5340-12-701-7113
Loop Clamp

127017113
VG95211-ML-127017113: RNCC: 2 | RNVC: 2
5.12.7601.3050.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-4285
Angle Bracket

123614285
51974800741: RNCC: 3 | RNVC: 2
51.97480-0741: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-12-701-9967
Loop Clamp

127019967
VG95211-ML-127019967: RNCC: 2 | RNVC: 2
155N464-707: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-310-4692
Mending Plate

123104692
5801429-1311.014: RNCC: 3 | RNVC: 2

25 May 1987

5340-12-340-6453
Mounting Bracket

123406453
463-069105.000: RNCC: 3 | RNVC: 9
9901341: RNCC: 5 | RNVC: 9

16 May 1996

5340-12-377-8778
Mounting Plate

123778778
9997001-828310.000.0: RNCC: 3 | RNVC: 2

18 Feb 2009

5340-12-390-0842
Angle Bracket

123900842
1994-004340.001.0: RNCC: 2 | RNVC: 2
1994-004340.001.0: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-12-358-0189
Support Hook

123580189
2500262-191310.000.0: RNCC: 2 | RNVC: 2
2500262-191310.000.0: RNCC: 3 | RNVC: 2

3 Sep 2002

5340-12-192-8491
Retaining Band

121928491
8-4242.00: RNCC: 2 | RNVC: 2
8-4242.00: RNCC: 3 | RNVC: 2
8-4242-00: RNCC: 5 | RNVC: 9
8-4242.00: RNCC: 5 | RNVC: 9
8-4242.00: RNCC: 5 | RNVC: 9

27 May 1982

5340-12-324-6328
Webbing Strap

123246328
79057-0300 GB 82517: RNCC: 3 | RNVC: 2
79057-300 GB 82517: RNCC: 3 | RNVC: 2
79057-0300 GB 82517: RNCC: 5 | RNVC: 9
79057-300 GB 82517: RNCC: 5 | RNVC: 9

8 Mar 1991

5340-12-352-9102
Loop Clamp

123529102
1315 301 055: RNCC: 3 | RNVC: 2
81974400213: RNCC: 5 | RNVC: 2

5 Jan 2001

5340-12-389-3083
Loop Clamp

123893083
4369C189M: RNCC: 3 | RNVC: 2
AC750183A: RNCC: 5 | RNVC: 2

20 Jun 2012

5340-12-189-0391
Retaining Strap

121890391
9851712: RNCC: 3 | RNVC: 2
25018100000001: RNCC: 5 | RNVC: 2
F300 0T 001 2973: RNCC: 6 | RNVC: 9

19 Aug 1981

5340-12-020-5583

5340-12-309-2713
Plug Button

123092713
BD9101E608: RNCC: 3 | RNVC: 2
BD9101E608: RNCC: 5 | RNVC: 9

8 Jan 1987

5340-12-358-7931
Buckle

123587931
2500295-40000.20: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-321-7426
Grooved Clamp Coupling Half

123217426
0515401: RNCC: 3 | RNVC: 2

21 Jun 1990

5340-12-316-1542
Access Cover

123161542
3833320033: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-321-6539
Manual Control Lever

123216539
23411242304: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-348-0870
Angle Bracket

123480870
17.000.0151.44: RNCC: 3 | RNVC: 2

13 Apr 1999

5340-12-307-1555
Lock-Release Lever

123071555
4046370180: RNCC: 3 | RNVC: 2

15 May 1986

5340-12-301-2442
Electronic Equipment Hardware Kit

123012442
M88969-P0100: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-363-2913
Mounting Plate

123632913
599.076.006.016: RNCC: 3 | RNVC: 2
81974880646: RNCC: 5 | RNVC: 2

20 May 2004

5340-12-374-2802
Access Cover

123742802
5306257: RNCC: 3 | RNVC: 2

5 Feb 2008

5340-12-323-4742
Nonmetallic Bumper

123234742
81961010382: RNCC: 3 | RNVC: 2
81.96101.0382: RNCC: 5 | RNVC: 2
81961010382: RNCC: 5 | RNVC: 9

29 Nov 1990

5340-12-090-7053

5340-12-391-6288
Mounting Bracket

123916288
1390335: RNCC: 3 | RNVC: 2

22 Mar 2013

5340-12-178-8057
Angle Bracket

121788057
C145-A5-C152: RNCC: 2 | RNVC: 2
C145A5C152: RNCC: 3 | RNVC: 2
C145-A5-C152: RNCC: 5 | RNVC: 2
C145A5C152: RNCC: 5 | RNVC: 2
C145-A5-C152: RNCC: 5 | RNVC: 2

18 May 1979

5340-12-184-8273
Mounting Bracket

121848273
5801357-2600.01D: RNCC: 2 | RNVC: 2
5801357-2600.01D: RNCC: 3 | RNVC: 2
5801357-2600-01D: RNCC: 5 | RNVC: 9
5801357-2600.01D: RNCC: 5 | RNVC: 9
5801357-2600-01D: RNCC: 5 | RNVC: 9
100000121: RNCC: 5 | RNVC: 9
5801357-2600-01D: RNCC: 5 | RNVC: 9

21 Aug 1980

5340-12-313-2585
Mounting Bracket

123132585
9XD098270-00: RNCC: 3 | RNVC: 2
098-270-00: RNCC: 5 | RNVC: 2
9XD-098-270-00: RNCC: 5 | RNVC: 9

16 Mar 1988

5340-12-195-8666
Retaining Strap

121958666
1-89VG85529-1.4571: RNCC: 2 | RNVC: 2

26 Apr 1983

5340-12-326-5801
Electrical-Mechanical Equipment Post

123265801
2300232-182150.001.0: RNCC: 2 | RNVC: 2
1527869: RNCC: 3 | RNVC: 2
2300232-182150.001.0: RNCC: 5 | RNVC: 2

9 Oct 1991

5340-12-162-2273
Resilient Mount

121622273
DIN95363-D20X20-NR60ST: RNCC: 2 | RNVC: 2
1.20.20.1A.60NR/ST: RNCC: 5 | RNVC: 2
A.F.20.19.60NRST: RNCC: 5 | RNVC: 2
81160-20X20-M6X20.NR60.ST: RNCC: 5 | RNVC: 2
909810105: RNCC: 5 | RNVC: 2
E909810105: RNCC: 5 | RNVC: 2
BE4-21-25A: RNCC: 5 | RNVC: 9
VG95363-D20X20-NR60ST: RNCC: 5 | RNVC: 9
VG95363D20X20NR60ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-323-9327
Loop Clamp

123239327
DIN3016-1-D1-80X20-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-80X20-W5: RNCC: 3 | RNVC: 2
RSGU1.80/20-W5: RNCC: 3 | RNVC: 2
DIN3016-D1-80X20-W5: RNCC: 5 | RNVC: 9

9 Jan 1991

5340-12-301-6989
Resilient Mount

123016989
DIN95363-B50X20-NR55ST: RNCC: 2 | RNVC: 2
1.50.20.3.55NR/ST: RNCC: 5 | RNVC: 2
811.010.050.020.10X25.NR55.ST: RNCC: 5 | RNVC: 2
81110-50X20-M10X25.NR55.ST: RNCC: 5 | RNVC: 2
81110-50X20-M10X25.NR55.STZN: RNCC: 5 | RNVC: 2
VG95363-B50X20-NR55ST: RNCC: 5 | RNVC: 9
VG95363-B50X20-NR55STZN: RNCC: 5 | RNVC: 9
VG95363B50X20NR55STZN: RNCC: 5 | RNVC: 9

3 Nov 1984

5340-12-178-8051
Angle Bracket

121788051
C106-A44-C73: RNCC: 2 | RNVC: 2
C106A44C73: RNCC: 3 | RNVC: 2
C106-A44-C73: RNCC: 5 | RNVC: 2
C106A44C73: RNCC: 5 | RNVC: 2
C106-A44-C73: RNCC: 5 | RNVC: 2

18 May 1979

5340-12-177-2692
Loop Clamp

121772692
1216749EF8932-23: RNCC: 3 | RNVC: 2
3204A21: RNCC: 5 | RNVC: 2
0121 6749: RNCC: 5 | RNVC: 2
1216749: RNCC: 5 | RNVC: 9

24 Jan 1979

5340-12-320-1180
Metal Runner

123201180
1789201: RNCC: 3 | RNVC: 2

8 Dec 1989

5340-12-168-2797
Loop Clamp

121682797
LN9491B42: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-188-3420
Nonmetallic Bumper

121883420
81961010474: RNCC: 3 | RNVC: 2
81.96101.0474: RNCC: 5 | RNVC: 2

1 Jul 1981

5340-12-393-4499
Handle Grip

123934499
2-80175290: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-12-347-5796
Hasp Staple

123475796
97.0066.4490: RNCC: 3 | RNVC: 2
999999 01631 4 1076: RNCC: 5 | RNVC: 2

11 Jan 1999

5340-12-328-9765
Casement Fastener

123289765
52.3108.122.00: RNCC: 2 | RNVC: 2
25.3108.122.00: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-326-4316
Access Cover

123264316
1666153: RNCC: 3 | RNVC: 2
1666153: RNCC: 5 | RNVC: 2
903.60225: RNCC: 5 | RNVC: 2
00.903.60225.000: RNCC: 5 | RNVC: 2
065.151.04.00.00: RNCC: 5 | RNVC: 2

16 Sep 1991

5340-12-385-0624
Loop Clamp

123850624
0632 311 299: RNCC: 3 | RNVC: 2

27 Apr 2011

5340-12-360-0979
Dust And Moisture Seal Protective Plug

123600979
9419970786: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-339-0496
Strap Fastener Loop

123390496
4607910230: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-173-8546
Loop Clamp

121738546
PAN4231CD3220: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-380-2212
Mounting Plate

123802212
235850: RNCC: 3 | RNVC: 2
94485-400.03: RNCC: 5 | RNVC: 2

7 Oct 2009

5340-12-349-1734
Dust And Moisture Seal Protective Cap

123491734
366201-03: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-12-373-5507
Mechanical Stop

123735507
2318614000: RNCC: 3 | RNVC: 2
231861 4000: RNCC: 5 | RNVC: 2

14 Nov 2007

5340-12-349-4496
Retaining Bail

123494496
T524M1510201: RNCC: 3 | RNVC: 2

17 Nov 1999

5340-12-317-4159
Helical Compression Spring Retainer

123174159
WW 482 526: RNCC: 2 | RNVC: 2
26153.02: RNCC: 3 | RNVC: 2
WW 482 526: RNCC: 3 | RNVC: 9
WW 482 526: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-179-7750
Webbing Strap

121797750
4258600994: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-193-0076
Catch Strike

121930076
SCHLIESZHAKEN1102 FORM A ZN: RNCC: 3 | RNVC: 2
1102SCHLIESZHAKEN FORM A ZN: RNCC: 5 | RNVC: 2
145173: RNCC: 5 | RNVC: 9

11 Jun 1982

5340-12-315-0633
Mounting Bracket

123150633
9869309: RNCC: 3 | RNVC: 2
5801435-080140-00: RNCC: 5 | RNVC: 2
9869309: RNCC: 5 | RNVC: 9
5801435-080140-00: RNCC: 5 | RNVC: 9

10 Sep 1988

5340-12-309-9187
Angle Bracket

123099187
1361013-51020.01: RNCC: 3 | RNVC: 2
1361013-51020-01: RNCC: 5 | RNVC: 2

18 Mar 1987

5340-12-316-9553
Resilient Mount

123169553
H95-216-137-186-8-9MM BOHRUNGEN: RNCC: 3 | RNVC: 2
DA 38-08 D2: RNCC: 3 | RNVC: 2
0005333254: RNCC: 5 | RNVC: 2
Z1479-08TM2: RNCC: 5 | RNVC: 2
Z1479-08 TM2: RNCC: 5 | RNVC: 2
Z1479-08 TM2: RNCC: 5 | RNVC: 2
Z1479-08 TM2: RNCC: 5 | RNVC: 2

28 Feb 1989

5340-12-306-0938
Spring Tension Clip

123060938
P-525426-407: RNCC: 3 | RNVC: 2
P525426-407: RNCC: 5 | RNVC: 2

27 Jan 1986

5340-12-378-5244
Manual Control Handle

123785244
213624B31: RNCC: 3 | RNVC: 2
2-13624B-31: RNCC: 5 | RNVC: 2

16 Apr 2009

5340-12-157-9445
Compression Cup

121579445
H420-1-88NBR/101: RNCC: 3 | RNVC: 2
H420-1-88NBR101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-324-3744
Electrical-Mechanical Equipment Post

123243744
VG95148C7XM4X15-2.0380.30-E2A: RNCC: 2 | RNVC: 2
VG95148C7XM4X15-2.0380.30-E2A: RNCC: 3 | RNVC: 2
DA7-M4X15: RNCC: 3 | RNVC: 2

8 Feb 1991

5340-12-186-6954
Butt Hinge Leaf

121866954
25704-001131.02.0: RNCC: 2 | RNVC: 2
25704-001131.02.0: RNCC: 3 | RNVC: 2
25704-001131-02-0: RNCC: 5 | RNVC: 2
25704-001131.02.0: RNCC: 5 | RNVC: 9
25704-001131-02-0: RNCC: 5 | RNVC: 9

28 Jan 1981

5340-12-344-4241
Mounting Bracket

123444241
A-616776-004: RNCC: 3 | RNVC: 2
A616776-004: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-343-1990
Access Cover

123431990
1-41-56540-250: RNCC: 3 | RNVC: 2
0-41-03673.4 POS19: RNCC: 5 | RNVC: 2

16 May 1997

5340-12-310-5990
Handle Grip

123105990
35 620: RNCC: 3 | RNVC: 2

4 Jun 1987

5340-12-392-6881
Runner

123926881
7133211: RNCC: 3 | RNVC: 2

28 Jun 2013

5340-12-391-5231
Access Cover

123915231
I006027TAN686A: RNCC: 3 | RNVC: 2

18 Mar 2013

5340-12-161-2419

5340-12-388-6158
Mounting Bracket

123886158
5842001540: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-12-392-2070
Access Cover

123922070
DF 106 175 AR: RNCC: 3 | RNVC: 2
DF 106 175 AR: RNCC: 5 | RNVC: 2

15 May 2013

5340-12-352-9835
Angle Bracket

123529835
CBD45038P02: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-375-1405
Rigid Caster

123751405
129405: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-330-4567
Loop Clamp

123304567
153 500 24: RNCC: 3 | RNVC: 2
15350024: RNCC: 5 | RNVC: 2

16 Dec 1992

5340-12-330-0193
Loop Clamp

123300193
LN9491BK80: RNCC: 2 | RNVC: 2

22 Oct 1992

5340-12-316-5328
Shimmy Damper

123165328
01600403: RNCC: 3 | RNVC: 2
519661: RNCC: 5 | RNVC: 2

24 Jan 1989

5340-12-342-2708
Spring Tension Clip

123422708
600 711 625: RNCC: 3 | RNVC: 2
81.97651.0076: RNCC: 5 | RNVC: 2
81976510076: RNCC: 5 | RNVC: 2

14 Jan 1997

5340-12-702-5474
Mounting Plate

127025474
VG95211-ML-127025474: RNCC: 2 | RNVC: 2
5.51.7211.1040.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-5211
Mounting Bracket

127025211
VG95211-ML-127025211: RNCC: 2 | RNVC: 2
5.51.7004.0100.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-2523
Butt Hinge Leaf

123652523
2500278-191740.002.0: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-12-329-4906
Casement Fastener

123294906
DP-106-AC: RNCC: 3 | RNVC: 2
DP106AC: RNCC: 5 | RNVC: 9

25 Aug 1992

5340-12-366-1091
Flush Bolt

123661091
2500267-190900.000.0: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-313-6982
Angle Bracket

123136982
510252-3083.000: RNCC: 3 | RNVC: 2

27 Apr 1988

5340-12-148-9174
Nonmetallic Bumper

121489174
23176-189325.01.0: RNCC: 2 | RNVC: 2
23176-189325.01.0: RNCC: 3 | RNVC: 2
23176-189325-01-0: RNCC: 5 | RNVC: 2
23176-189325-01-0: RNCC: 5 | RNVC: 9
23176-189325.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-350-3095
Mounting Plate

123503095
2300324-250050.004: RNCC: 2 | RNVC: 2
9937158: RNCC: 3 | RNVC: 2
2300324-250050.004: RNCC: 5 | RNVC: 2
9937158: RNCC: 5 | RNVC: 9
2300324-250050.004: RNCC: 5 | RNVC: 9

15 Mar 2000

5340-12-191-1112
Nonmetallic Bumper

121911112
45 325 47 109: RNCC: 3 | RNVC: 2
02165390: RNCC: 5 | RNVC: 2

13 Jan 1982

5340-12-310-1948
Ball Socket Seat

123101948
0009915222: RNCC: 3 | RNVC: 2

16 Apr 1987

5340-12-375-3064
Dust And Moisture Seal Protective Cap

123753064
0630361104: RNCC: 3 | RNVC: 2

19 May 2008

5340-12-364-4260
Padlock

123644260
77210002-TCS: RNCC: 3 | RNVC: 2

24 Sep 2004

5340-12-384-6025
Door Handle

123846025
633211: RNCC: 3 | RNVC: 2

11 Mar 2011

5340-12-168-5112
Access Cover

121685112
1000025-260644: RNCC: 3 | RNVC: 2
1000025-260644: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-044-4733

5340-12-010-7456

5340-12-044-5644

5340-12-360-4112
Mounting Bracket

123604112
1864411511: RNCC: 3 | RNVC: 2
1864411511: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-181-0467
Mending Plate

121810467
81664400028: RNCC: 3 | RNVC: 2
81.66440.0028: RNCC: 5 | RNVC: 2

19 Oct 1979

5340-12-305-3533
Dust And Moisture Seal Protective Plug

123053533
P005217716801000: RNCC: 3 | RNVC: 2
5217716801: RNCC: 5 | RNVC: 2

25 Oct 1985

5340-12-197-7576
Webbing Strap

121977576
10056BW6000-2000: RNCC: 3 | RNVC: 2

21 Nov 1983

5340-12-354-6024
Block Clamp

123546024
A2901071400000: RNCC: 3 | RNVC: 2
A2901071400000: RNCC: 5 | RNVC: 9

7 Aug 2001

5340-12-347-4768
Loop Clamp

123474768
824767: RNCC: 3 | RNVC: 9

15 Dec 1998

5340-12-137-6028

5340-12-161-0166

5340-12-389-4203
Spring Tension Clip

123894203
HLN9714A: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-12-350-0146
Angle Bracket

123500146
2300232.971300.001.0: RNCC: 3 | RNVC: 2
1528788: RNCC: 5 | RNVC: 2

4 Feb 2000

5340-12-346-1531
Dust And Moisture Seal Protective Cap

123461531
42000: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-12-391-4693
Access Cover

123914693
I007392TAN686A: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-352-2956
Loop Clamp

123522956
5205619: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-171-4599
Mending Plate

121714599
02324: RNCC: 3 | RNVC: 2
02324: RNCC: 5 | RNVC: 9

13 Oct 1977

5340-12-176-9279
Catch Strike

121769279
4217230203: RNCC: 3 | RNVC: 2
4217230203: RNCC: 5 | RNVC: 2

27 Dec 1978

5340-12-328-6751
Nonmetallic Bumper

123286751
701823429: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-393-3514
Flush Lock

123933514
0028903367: RNCC: 3 | RNVC: 2

10 Sep 2013

5340-12-393-4017
Crank Handle

123934017
7360 340 103: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-12-341-4890
Mounting Bracket

123414890
M413039: RNCC: 3 | RNVC: 9
M 413 039: RNCC: 5 | RNVC: 9

10 Sep 1996

5340-12-365-1547
Access Cover

123651547
4616200707: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-050-3736

5340-12-361-6317
Mounting Bracket

123616317
0550672: RNCC: 3 | RNVC: 2

27 Oct 2003

5340-12-358-9784
Mounting Bracket

123589784
2300186-188232.000: RNCC: 2 | RNVC: 2
2300186-188232.000: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-313-0830
Angle Bracket

123130830
P-896090-001: RNCC: 3 | RNVC: 2
P896090-001: RNCC: 5 | RNVC: 2

3 Mar 1988

5340-12-159-9238
Retaining Strap

121599238
21.3129.2001: RNCC: 3 | RNVC: 9
21-3129-2001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-2179
Mounting Bracket

127022179
VG95211-ML-127022179: RNCC: 2 | RNVC: 2
30.7225-160: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-334-5470
Lock-Release Lever

123345470
4900347-200120.00: RNCC: 2 | RNVC: 2
4900347-200120.00: RNCC: 3 | RNVC: 2

24 May 1994

5340-12-311-4873
Dust And Moisture Seal Protective Plug

123114873
900A11 RAL6014: RNCC: 3 | RNVC: 2
GPN900A11-RAL6014: RNCC: 5 | RNVC: 2
GPN900,A11-RAL6014: RNCC: 5 | RNVC: 2

9 Sep 1987

5340-12-186-6956
Access Cover

121866956
25704-192300.02.0: RNCC: 2 | RNVC: 2
25704-192300.02.0: RNCC: 3 | RNVC: 2
25704-192300-02-0: RNCC: 5 | RNVC: 2
25704-192300-02-0: RNCC: 5 | RNVC: 9
25704-192300.02.0: RNCC: 5 | RNVC: 9

28 Jan 1981

5340-12-189-5224
Nonmetallic Bumper

121895224
5801433-020000.18.0: RNCC: 2 | RNVC: 2
9834180: RNCC: 3 | RNVC: 2
5801433-020000-18-0: RNCC: 5 | RNVC: 2
5801433-020000.18.0: RNCC: 5 | RNVC: 2
9834180: RNCC: 5 | RNVC: 9
5801433-020000.18.0: RNCC: 5 | RNVC: 9

5 Oct 1981

5340-12-702-4795
Mounting Bracket

127024795
VG95211-ML-127024795: RNCC: 2 | RNVC: 2
5.51.0607.0001.01: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-378-3196
Nut And Bolt Head Protective Cap

123783196
006130060: RNCC: 3 | RNVC: 2

27 Mar 2009

5340-12-349-8933
Angle Bracket

123498933
T214M1001101: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-371-6168
Mounting Bracket

123716168
0242 5246: RNCC: 3 | RNVC: 2

26 Apr 2007

5340-12-353-4093
Loop Clamp

123534093
EN4113F12WH: RNCC: 2 | RNVC: 2

21 Mar 2001

5340-12-123-2712
Nonmetallic Bumper

121232712
33567160: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-305-7637
Nonmetallic Bumper

123057637
106072: RNCC: 3 | RNVC: 2

10 Dec 1985

5340-12-360-9094
Mounting Bracket

123609094
8900920014: RNCC: 3 | RNVC: 2

23 Jul 2003

5340-12-163-7420
Loop Clamp

121637420
LN9491BM5: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-314-4325
Angle Bracket

123144325
6205001031: RNCC: 3 | RNVC: 2
620 500 10 31: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-389-9381
Swivel Caster

123899381
BH-POEV 200R: RNCC: 3 | RNVC: 2

14 Sep 2012

5340-12-304-1429
Metal Runner

123041429
17462.1M36: RNCC: 3 | RNVC: 2

14 Jun 1985

5340-12-162-2253
Loop Clamp

121622253
2455331EE5034-71: RNCC: 3 | RNVC: 2
02455331: RNCC: 5 | RNVC: 2
02455331: RNCC: 5 | RNVC: 9
2455331EE5034-71: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-192-3803
Angle Bracket

121923803
3828570016: RNCC: 3 | RNVC: 2

20 Apr 1982

5340-12-320-4401
Dust And Moisture Seal Protective Plug

123204401
620U16B: RNCC: 3 | RNVC: 2
620U16B: RNCC: 5 | RNVC: 2
GPN620,U16B: RNCC: 5 | RNVC: 9

15 Jan 1990

5340-12-317-7391
Dust And Moisture Seal Protective Plug

123177391
11081217200: RNCC: 3 | RNVC: 2

5 May 1989

5340-12-339-2820
Mounting Bracket

123392820
K0002420185: RNCC: 3 | RNVC: 2
0242 0185: RNCC: 5 | RNVC: 2

3 Nov 1995

5340-12-388-5081
Dust And Moisture Seal Protective Cap

123885081
866417402: RNCC: 3 | RNVC: 2

28 Mar 2012

5340-12-383-6071
Rod End Connector

123836071
903706: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-12-198-1135
Bridge Clamp

121981135
3463020222: RNCC: 3 | RNVC: 2

21 Dec 1983

5340-12-319-2886
Nonmetallic Solid Wheel

123192886
1700015-300.06: RNCC: 2 | RNVC: 2
500663: RNCC: 3 | RNVC: 2

19 Sep 1989

5340-12-025-3163

5340-12-196-2658
Rod End Clevis

121962658
03469100: RNCC: 3 | RNVC: 2

22 Jun 1983

5340-12-336-5981
Access Cover

123365981
2300223-207220.03.0: RNCC: 2 | RNVC: 2
2300223-207220.03.0: RNCC: 3 | RNVC: 2
2300223-207220-03-0: RNCC: 5 | RNVC: 2
3000008-207220.03.0: RNCC: 5 | RNVC: 2
A3-248.052-65: RNCC: 5 | RNVC: 9

29 Nov 1994

5340-12-321-5894
Mending Plate

123215894
P-886758-415: RNCC: 3 | RNVC: 2
P886758-415: RNCC: 5 | RNVC: 2

6 Jun 1990

5340-12-392-6691
Hand Crank

123926691
06-02-020-15-01: RNCC: 3 | RNVC: 2
H03997: RNCC: 5 | RNVC: 2

27 Jun 2013

5340-12-328-5552
Rim Lock

123285552
2080 101: RNCC: 3 | RNVC: 2
2080-101: RNCC: 5 | RNVC: 2

3 Jun 1992

5340-12-177-1609
Expansion Plug

121771609
DIN443-A13-ST-PHR: RNCC: 2 | RNVC: 2
A13DIN443PHR: RNCC: 5 | RNVC: 2
000443013001: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-700-2977
Lock-Release Lever

127002977
51-262219074: RNCC: 2 | RNVC: 2
765.39.112: RNCC: 3 | RNVC: 2
765-39-112: RNCC: 5 | RNVC: 9

4 Dec 1991

5340-12-178-0449
Expansion Shield

121780449
NO PRIMARY REF 12-178-0449: RNCC: 3 | RNVC: 2
A0009881625: RNCC: 5 | RNVC: 2
0009881625: RNCC: 5 | RNVC: 2
201025000: RNCC: 5 | RNVC: 9

16 Mar 1979

5340-12-187-0478
Electrical-Mechanical Equipment Post

121870478
5801338-0513: RNCC: 3 | RNVC: 2

25 Feb 1981

5340-12-151-4260
Retaining Strap

121514260
23111-2929-04: RNCC: 2 | RNVC: 2
23111-2929-04: RNCC: 5 | RNVC: 2
23111-2929-04: RNCC: 5 | RNVC: 9
1123762: RNCC: 5 | RNVC: 9
23111-2929-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-340-2186
Resilient Mount

123402186
H125-216-110-150-8: RNCC: 3 | RNVC: 2
H125-216-110-150-8: RNCC: 5 | RNVC: 2
550-0473: RNCC: 5 | RNVC: 2
550-0473: RNCC: 5 | RNVC: 2
550-0473: RNCC: 5 | RNVC: 9

15 Mar 1996

5340-12-159-5367
Loop Clamp

121595367
DIN3016-1-E2-12-16X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E2-12-16X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.12-16/15: RNCC: 3 | RNVC: 2
RSGU12-16-15: RNCC: 5 | RNVC: 2
RSGU12-16/15: RNCC: 5 | RNVC: 2
4209101012: RNCC: 5 | RNVC: 2
DIN3016-E2-12-16X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-3595
Support Hook

123213595
FFVUOE-441372: RNCC: 3 | RNVC: 2

9 May 1990

5340-12-166-9948
Butt Hinge Leaf

121669948
23305-311000.54.0: RNCC: 2 | RNVC: 2
D86 707 3001: RNCC: 3 | RNVC: 2
02811410: RNCC: 5 | RNVC: 2
2811410ED7205-31: RNCC: 5 | RNVC: 2
867073001: RNCC: 5 | RNVC: 2
23305-311000-54-0: RNCC: 5 | RNVC: 9
23305-311000.54.0: RNCC: 5 | RNVC: 9
02811410: RNCC: 5 | RNVC: 9
2811410ED7205-31: RNCC: 5 | RNVC: 9

10 Nov 1976

5340-12-352-8121
Angle Bracket

123528121
A-920267-403: RNCC: 3 | RNVC: 2
A920267-403: RNCC: 5 | RNVC: 2

19 Dec 2000

5340-12-338-8019
Mounting Plate

123388019
6700017-203330.00: RNCC: 2 | RNVC: 2
6700017-203330.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-382-0007
Hand Crank

123820007
42-80016-700: RNCC: 3 | RNVC: 2
42-80-016.7: RNCC: 5 | RNVC: 2

27 Apr 2010

5340-12-309-2795
Kunst Gleitschiene

123092795
P-896360-027: RNCC: 3 | RNVC: 2
P896360-027: RNCC: 5 | RNVC: 2

9 Jan 1987

Load More Results