What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 34 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 34 of 178

5340-12-166-3827
Angle Bracket

121663827
251133320300: RNCC: 3 | RNVC: 2
251133320300: RNCC: 5 | RNVC: 2

3 Sep 1976

5340-12-349-7652
Dust And Moisture Seal Protective Cover

123497652
U60.231300.00-00: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-12-365-8617
Dust And Moisture Seal Protective Cap

123658617
255/25: RNCC: 3 | RNVC: 2

15 Feb 2005

5340-12-376-7498
Loop Clamp

123767498
GN150-32-B16: RNCC: 3 | RNVC: 2

4 Nov 2008

5340-12-189-1912
Dust And Moisture Seal Protective Cap-Plug

121891912
025-0500-000: RNCC: 3 | RNVC: 2

9 Sep 1981

5340-12-164-4046
Loop Clamp

121644046
DIN3016-G1-138X20-W1-2: RNCC: 2 | RNVC: 2
SP138/20SKZ: RNCC: 3 | RNVC: 2
DIN3016-G1-138X20-W1-2: RNCC: 3 | RNVC: 2
1510000138: RNCC: 5 | RNVC: 2
SP138-20SK: RNCC: 5 | RNVC: 2
VG95931-G138X20-W1: RNCC: 5 | RNVC: 9
VG95931G138X20W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-192-5116
Rod End Clevis

121925116
P-895955-001: RNCC: 3 | RNVC: 2
P895955-001: RNCC: 5 | RNVC: 2

29 Apr 1982

5340-12-300-0465
Helical Compression Spring Seat

123000465
5055623: RNCC: 3 | RNVC: 2
50-5-5623: RNCC: 5 | RNVC: 2
50.5.5623: RNCC: 5 | RNVC: 2

27 Jun 1984

5340-12-354-9475
Mounting Bracket

123549475
P-876045-013: RNCC: 3 | RNVC: 2
P876045-013: RNCC: 5 | RNVC: 2

10 Sep 2001

5340-12-319-0446
Casement Fastener

123190446
4122000047: RNCC: 3 | RNVC: 2

1 Sep 1989

5340-12-325-6554
Angle Bracket

123256554
3145460643: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-12-310-4521
Handwheel

123104521
81970050038: RNCC: 3 | RNVC: 2
81.97005.0038: RNCC: 5 | RNVC: 2

22 May 1987

5340-12-368-1776
Section Block Clamp

123681776
JN0413CGCJ72: RNCC: 3 | RNVC: 2

29 Dec 2005

5340-12-339-0264
Angle Bracket

123390264
1120-95423: RNCC: 2 | RNVC: 2
1120-95423: RNCC: 3 | RNVC: 2

28 Sep 1995

5340-12-353-7064
Mounting Bracket

123537064
47067915401: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-343-1928
Spring Tension Clip

123431928
1304680023: RNCC: 3 | RNVC: 2
81.25116-0022: RNCC: 5 | RNVC: 2
81251160022: RNCC: 5 | RNVC: 2
9319 1489: RNCC: 5 | RNVC: 2
93191489: RNCC: 5 | RNVC: 2

15 May 1997

5340-12-326-4644
Access Cover

123264644
2300061-053140.000: RNCC: 2 | RNVC: 2
9840435: RNCC: 3 | RNVC: 2
2300061-053140.000: RNCC: 5 | RNVC: 9
9840435: RNCC: 5 | RNVC: 9

19 Sep 1991

5340-12-325-2510
Spring Loaded Cylinder Fastener

123252510
5802233-040304.000: RNCC: 2 | RNVC: 2
7800014450: RNCC: 3 | RNVC: 2
5802233-040304.000: RNCC: 5 | RNVC: 9
78000 14450: RNCC: 5 | RNVC: 9

22 May 1991

5340-12-366-9738
Angle Bracket

123669738
504-151610.001: RNCC: 2 | RNVC: 2
504-151610.001: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-175-1442
Webbing Strap

121751442
14021-20006-00: RNCC: 3 | RNVC: 2
893561: RNCC: 5 | RNVC: 2

28 Aug 1978

5340-12-302-2912
Mending Plate

123022912
P-856030-001: RNCC: 3 | RNVC: 2
P856030-001: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-12-703-3089
Angle Bracket

127033089
VG95211-ML-127033089: RNCC: 2 | RNVC: 2
5.12.2210.1714.02: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-316-1835
Nonmetallic Bumper

123161835
0B610.50-00-00-00-019: RNCC: 2 | RNVC: 2
837-30X20X2-SI40-5.5447: RNCC: 3 | RNVC: 2
0B610.50-00-00-00-019: RNCC: 3 | RNVC: 2
149173: RNCC: 5 | RNVC: 2
0A610.50-00-00-00-019: RNCC: 5 | RNVC: 9

29 Dec 1988

5340-12-306-3985
Metal Runner

123063985
V22.917.1-15: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-320-8860
Retaining Strap

123208860
P-295514-021: RNCC: 3 | RNVC: 2
P295514-021: RNCC: 5 | RNVC: 2

1 Mar 1990

5340-12-327-6568
Angle Bracket

123276568
009-039.436-004: RNCC: 3 | RNVC: 2
009-039-436-004: RNCC: 5 | RNVC: 2
12791-430000-004: RNCC: 5 | RNVC: 9
12791-430000.004: RNCC: 5 | RNVC: 9

14 Feb 1992

5340-12-358-0255
Flush Lock

123580255
1H1837015M: RNCC: 3 | RNVC: 2
1H1 837 015M: RNCC: 5 | RNVC: 9

3 Sep 2002

5340-12-325-2484
Mounting Bracket

123252484
4603150494: RNCC: 3 | RNVC: 2

22 May 1991

5340-12-095-0127

5340-12-315-4058
Webbing Strap

123154058
TYPEIII: RNCC: 3 | RNVC: 2

19 Oct 1988

5340-12-181-0200
Spring Tension Clip

121810200
81668402001: RNCC: 3 | RNVC: 2

17 Oct 1979

5340-12-306-3061
Mending Plate

123063061
2996.64.34: RNCC: 3 | RNVC: 2

18 Feb 1986

5340-12-318-9945
Butt Hinge Leaf

123189945
7600000015: RNCC: 3 | RNVC: 2
76.0000.0015: RNCC: 5 | RNVC: 2
K3161.884: RNCC: 5 | RNVC: 2

30 Aug 1989

5340-12-351-7351
Loop Clamp

123517351
0009955244: RNCC: 3 | RNVC: 2

16 Aug 2000

5340-12-320-9198
Angle Bracket

123209198
0223 2033: RNCC: 3 | RNVC: 2
02232033EC0150-43: RNCC: 5 | RNVC: 2

6 Mar 1990

5340-12-382-2230
Loop Clamp

123822230
JN0230B28: RNCC: 3 | RNVC: 2

25 May 2010

5340-12-043-2710

5340-12-376-8737
Manual Control Handle

123768737
0008300236: RNCC: 3 | RNVC: 2

14 Nov 2008

5340-12-371-3745
Helical Compression Spring Seat

123713745
R900108249: RNCC: 3 | RNVC: 2
108249: RNCC: 5 | RNVC: 2

21 Mar 2007

5340-12-351-8125
Section Block Clamp

123518125
J32320326-001: RNCC: 3 | RNVC: 2

29 Aug 2000

5340-12-320-7453
Access Cover

123207453
T01-5100A002D: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-12-321-9449
Detent Plunger

123219449
0337 1843: RNCC: 3 | RNVC: 2
0155-11-05-08: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-12-150-8611
Screw Hook

121508611
390004-120: RNCC: 2 | RNVC: 2
390004-120: RNCC: 3 | RNVC: 2
390004-120: RNCC: 5 | RNVC: 9
390004-120: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-388-5287
Retaining Strap

123885287
AD9-89MMN346-ST-VERZINKT: RNCC: 3 | RNVC: 2
700346089100: RNCC: 5 | RNVC: 2

29 Mar 2012

5340-12-168-6731
Loop Clamp

121686731
30C: RNCC: 3 | RNVC: 2
211-15300: RNCC: 5 | RNVC: 2
202025901: RNCC: 5 | RNVC: 9

28 Mar 1977

5340-12-379-3887
Dirt And Liquid Deflector

123793887
22RH130: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-043-2557

5340-12-383-5100
Mounting Bracket

123835100
538044: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-12-323-8295
Handwheel

123238295
68624: RNCC: 3 | RNVC: 2
68624: RNCC: 3 | RNVC: 9

21 Dec 1990

5340-12-382-4041
Webbing Strap

123824041
1410920033: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-12-316-5974
Helical Compression Spring Seat

123165974
6380497: RNCC: 3 | RNVC: 2

27 Jan 1989

5340-12-151-1389
Retaining Strap

121511389
121G10028: RNCC: 3 | RNVC: 2
121G10028E1: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-123-2574
Nut And Bolt Locking Plate

121232574
33025395: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-353-1561
Mounting Bracket

123531561
5062030444: RNCC: 3 | RNVC: 2
506 203 04 44: RNCC: 5 | RNVC: 2

5 Feb 2001

5340-12-357-7057
Strap Fastener Loop

123577057
331984: RNCC: 3 | RNVC: 2
0006220099: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-162-2003
Case Corner

121622003
3635228715: RNCC: 3 | RNVC: 2
36352 28715: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-344-0403
Lock-Release Lever

123440403
2996.72.61: RNCC: 3 | RNVC: 2
2996.7261: RNCC: 5 | RNVC: 2

3 Sep 1997

5340-12-329-8698
Headless Straight Rod

123298698
M547048: RNCC: 3 | RNVC: 9

8 Oct 1992

5340-12-166-1939
Nonmetallic Bumper

121661939
4049870439: RNCC: 3 | RNVC: 2

12 Aug 1976

5340-12-384-7090
Manual Control Lever

123847090
917349: RNCC: 3 | RNVC: 2

22 Mar 2011

5340-12-041-9774

5340-12-198-2794
Plain Solid Disk

121982794
5801433-030000.04.0: RNCC: 2 | RNVC: 2
5801433-030000.04.0: RNCC: 3 | RNVC: 2
5801433-030000-04-0: RNCC: 5 | RNVC: 2

10 Jan 1984

5340-12-199-6905
Mending Plate

121996905
A-296770-033: RNCC: 3 | RNVC: 2
A296770-033: RNCC: 5 | RNVC: 2

23 May 1984

5340-12-316-4747
Mounting Bracket

123164747
P-050272-003: RNCC: 3 | RNVC: 2
P050272-003: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-323-8669
Loop Clamp

123238669
DIN3016-1-D1-4X9-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-4X9-W5: RNCC: 3 | RNVC: 2
RSGU1.4/9-W5: RNCC: 3 | RNVC: 2
WS 9002-4003: RNCC: 5 | RNVC: 2
STD1267-4003: RNCC: 5 | RNVC: 2
DIN3016-D1-4X9-W5: RNCC: 5 | RNVC: 9
RSGU1-4/9-5: RNCC: 5 | RNVC: 9
VG95931-D4X9-W5: RNCC: 5 | RNVC: 9

2 Jan 1991

5340-12-337-8946
Mounting Bracket

123378946
1602-101500.000.0: RNCC: 2 | RNVC: 2
1602-101500.000.0: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-12-341-6759
Mounting Plate

123416759
4900059-222030.001.0: RNCC: 2 | RNVC: 2
4900059-222030.001.0: RNCC: 3 | RNVC: 2

12 Oct 1996

5340-12-195-1449
Support Hook

121951449
5L6097.001-04: RNCC: 3 | RNVC: 2
201924-1: RNCC: 5 | RNVC: 2

17 Jan 1983

5340-12-353-8455
Mounting Bracket

123538455
A 25090: RNCC: 3 | RNVC: 2

15 May 2001

5340-12-379-5212
Multiple Angle Bracket

123795212
120D011400.010.0: RNCC: 2 | RNVC: 2
120D011400.010.0: RNCC: 3 | RNVC: 2
1319650: RNCC: 5 | RNVC: 2

3 Aug 2009

5340-12-197-8371
Nonmetallic Bumper

121978371
11043 0 002: RNCC: 3 | RNVC: 2
110430002: RNCC: 5 | RNVC: 2
0007430097: RNCC: 5 | RNVC: 2
0007660105: RNCC: 5 | RNVC: 9
11043.0.002: RNCC: 5 | RNVC: 9

28 Nov 1983

5340-12-358-2005
Nonmetallic Bumper

123582005
BK 206686: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-12-367-9250
Dust And Moisture Seal Protective Cap

123679250
210ZL18X20: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-12-359-7316
Mending Plate

123597316
S281M2034101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-027-3266

5340-12-324-1030
Angle Bracket

123241030
54.2551.400.02: RNCC: 3 | RNVC: 2

22 Jan 1991

5340-12-094-6990

5340-12-301-7906
Dust And Moisture Seal Protective Plug

123017906
1139870044: RNCC: 3 | RNVC: 2

9 Nov 1984

5340-12-379-9566
Plain Solid Disk

123799566
80000801: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-026-6933

5340-12-195-5392
Resilient Mount

121955392
070199231: RNCC: 3 | RNVC: 9

9 Mar 1983

5340-12-149-4911
Mortise Lock Set

121494911
3381Z: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-301-2408
Mending Plate

123012408
4179255: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-701-4782
Mounting Bracket

127014782
VG95211-ML-127014782: RNCC: 2 | RNVC: 2
5.12.5811.1230.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-189-7684
Handwheel

121897684
VG85084-B-63X7-2.1096.01: RNCC: 2 | RNVC: 2
VG85084-B-63X7-2.1096.01: RNCC: 3 | RNVC: 2
VG85084-B-63X7-2.1096.01: RNCC: 3 | RNVC: 2
VG85084-B-63X7-2.1096.01: RNCC: 3 | RNVC: 9
B63X7VG85084-RG5: RNCC: 5 | RNVC: 2
B63X7VG85084GCUSN5ZNPB: RNCC: 5 | RNVC: 2
B63X7VG85084RG5: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-12-196-9030
Angle Bracket

121969030
A-296657-405: RNCC: 3 | RNVC: 2
A296657-405: RNCC: 5 | RNVC: 2

30 Aug 1983

5340-12-393-7779
Swivel Caster

123937779
LO-ALTH250K: RNCC: 3 | RNVC: 2
266130: RNCC: 5 | RNVC: 2
4047526266134: RNCC: 5 | RNVC: 2

10 Oct 2013

5340-12-310-3688
Catch Strike

123103688
5801758-0700.05: RNCC: 2 | RNVC: 2
5801758-0700.05: RNCC: 3 | RNVC: 2

15 May 1987

5340-12-301-8444
Nonmetallic Bumper

123018444
VG95092A4X2,2X10X4NR40: RNCC: 2 | RNVC: 2
1159870240: RNCC: 3 | RNVC: 2
82200-A4X2,2X10X4.NR40: RNCC: 3 | RNVC: 2
A4X2,2X10X4.40NR: RNCC: 5 | RNVC: 2

13 Nov 1984

5340-12-182-2522
Access Cover

121822522
2300033-312000-05: RNCC: 2 | RNVC: 2
2300033-312000-05: RNCC: 5 | RNVC: 9

21 Jan 1980

5340-12-376-8820
Bumper

123768820
EE-M0064-32: RNCC: 3 | RNVC: 2

14 Nov 2008

5340-12-350-3304
Mounting Bracket

123503304
160-31032-11: RNCC: 3 | RNVC: 2
160-31032-011: RNCC: 5 | RNVC: 2

16 Mar 2000

5340-12-347-6041
Mounting Bracket

123476041
8854 132-121: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-393-6842
Angle Bracket

123936842
11.29225-0044: RNCC: 3 | RNVC: 2
11.29225-0044: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-12-370-9252
Mounting Bracket

123709252
7010708-100000.05: RNCC: 2 | RNVC: 2
7010708-100000.05: RNCC: 3 | RNVC: 2

17 Jan 2007

5340-12-152-5198
Resilient Mount

121525198
27924.NR75.ST: RNCC: 3 | RNVC: 2
27924BSKZ7490: RNCC: 3 | RNVC: 2
27924FJ35: RNCC: 5 | RNVC: 2
731002-M16.NR75.ST: RNCC: 5 | RNVC: 2
27924FI35: RNCC: 5 | RNVC: 2
27924FJ35: RNCC: 5 | RNVC: 2
27924SM750: RNCC: 5 | RNVC: 2
27924,NR75ST: RNCC: 5 | RNVC: 2
VG95365-A4-NR75ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-7188
Double Angle Bracket

121907188
NO PRIMARY REF 12-190-7188: RNCC: 3 | RNVC: 2
7532137780: RNCC: 5 | RNVC: 9
7532 137780: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-178-8477
Webbing Strap

121788477
23111-4644.00: RNCC: 2 | RNVC: 2
23111-4644.00: RNCC: 3 | RNVC: 2
23111-4644.00: RNCC: 5 | RNVC: 2
23111-4644-00: RNCC: 5 | RNVC: 9
23111-4644.00: RNCC: 5 | RNVC: 9
23111-4644-00: RNCC: 5 | RNVC: 9
23111-4644.00: RNCC: 5 | RNVC: 9
000-G1-25X2,0X550X150-PE-RAL6031: RNCC: 6 | RNVC: 9

18 May 1979

5340-12-320-6075
Angle Bracket

123206075
C119-A2-C94: RNCC: 3 | RNVC: 2

30 Jan 1990

5340-12-175-8046
Clamping Catch

121758046
V951L02-1-5BP: RNCC: 3 | RNVC: 2
5L3741-008-01: RNCC: 5 | RNVC: 2
51L1-1-5BF: RNCC: 5 | RNVC: 2
51L1-1-5BF4-2: RNCC: 5 | RNVC: 2
4312 712 0972: RNCC: 5 | RNVC: 2
5800377-210000.14: RNCC: 5 | RNVC: 9

18 Oct 1978

5340-12-390-5406
Angle Bracket

123905406
SK1018-061000.015.0: RNCC: 3 | RNVC: 2
7112791: RNCC: 5 | RNVC: 2

21 Nov 2012

5340-12-344-3538
T Bracket

123443538
A-243707-015: RNCC: 3 | RNVC: 2
A243707-015: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-701-2023
Mounting Bracket

127012023
VG95211-ML-127012023: RNCC: 2 | RNVC: 2
5.12.0603.8910.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-307-6140
Resilient Mount

123076140
DIN95363-A20X25-NR55ST: RNCC: 2 | RNVC: 2
811.000.020.025.06X20.NR55.ST: RNCC: 5 | RNVC: 2
81100-20X25-M6X20.NR55.ST: RNCC: 5 | RNVC: 2
1.20.25.1.55NR/ST: RNCC: 5 | RNVC: 2
31658: RNCC: 5 | RNVC: 2
31658/A-BSTN5590: RNCC: 5 | RNVC: 2
31658BSTN5590: RNCC: 5 | RNVC: 2
31658SM550: RNCC: 5 | RNVC: 2
VG95363-A20X25-NR55ST: RNCC: 5 | RNVC: 9

9 Jul 1986

5340-12-344-4737
Angle Bracket

123444737
P-243952-007: RNCC: 3 | RNVC: 2
P243952-007: RNCC: 5 | RNVC: 2

30 Oct 1997

5340-12-198-5975
Angle Bracket

121985975
2300039-069640.00.0: RNCC: 2 | RNVC: 2
2300039-069640.00.0: RNCC: 3 | RNVC: 2
2300039-069640-00-0: RNCC: 5 | RNVC: 9

14 Feb 1984

5340-12-199-3318
Resilient Mount

121993318
3103201475: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-12-333-3580
Angle Bracket

123333580
8142902.0151: RNCC: 2 | RNVC: 2
81429020151: RNCC: 3 | RNVC: 2
81.42902.0151: RNCC: 5 | RNVC: 2

6 Dec 1993

5340-12-390-0537
Blank Panel

123900537
DU 407 045 AE: RNCC: 3 | RNVC: 2
DU 407 045 AE: RNCC: 5 | RNVC: 2

27 Sep 2012

5340-12-329-5942
Nonmetallic Solid Wheel

123295942
204830-4032: RNCC: 3 | RNVC: 2

5 Sep 1992

5340-12-095-0427

5340-12-179-7722
Butt Hinge

121797722
4259805057: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-340-5563
Loop Clamp

123405563
182606401: RNCC: 3 | RNVC: 2
D182606401: RNCC: 5 | RNVC: 2

1 May 1996

5340-12-327-5002
Access Cover

123275002
4616911008: RNCC: 3 | RNVC: 2

28 Jan 1992

5340-12-321-4950
Mounting Bracket

123214950
1239401: RNCC: 3 | RNVC: 2
GZ12394: RNCC: 5 | RNVC: 2

23 May 1990

5340-12-377-3725
Angle Bracket

123773725
D4075727: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-179-6249
Mending Plate

121796249
183501593: RNCC: 3 | RNVC: 2

13 Jul 1979

5340-12-159-1962
Dust And Moisture Seal Protective Plug

121591962
344011216: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-336-9080
Angle Bracket

123369080
2300074-5561.02: RNCC: 2 | RNVC: 2
2300074-5561.02: RNCC: 3 | RNVC: 2
9866131: RNCC: 5 | RNVC: 9
2300074-5561.02: RNCC: 5 | RNVC: 9

23 Dec 1994

5340-12-332-6065
Protection Bellows

123326065
7823: RNCC: 3 | RNVC: 2
3522 500 44666: RNCC: 5 | RNVC: 2
352250044666: RNCC: 5 | RNVC: 2

27 Aug 1993

5340-12-322-0164
Dust And Moisture Seal Protective Cap

123220164
8052 040 210: RNCC: 3 | RNVC: 2
8052040210: RNCC: 5 | RNVC: 2
5000804996: RNCC: 5 | RNVC: 2
8052040210: RNCC: 5 | RNVC: 9

17 Jul 1990

5340-12-378-3571
Butt Hinge

123783571
41259035: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-385-0540
Mounting Plate

123850540
864064007: RNCC: 3 | RNVC: 2

26 Apr 2011

5340-12-178-8041
Loop Clamp

121788041
3609952001: RNCC: 3 | RNVC: 2

18 May 1979

5340-12-179-7369
Webbing Strap

121797369
T12958: RNCC: 3 | RNVC: 2
T12958: RNCC: 5 | RNVC: 9

25 Jul 1979

5340-12-348-9674
Mounting Plate

123489674
228098 4000: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-12-323-1833
Loop Clamp

123231833
036-0130-014-020: RNCC: 3 | RNVC: 2
036 460 014 018: RNCC: 3 | RNVC: 2
42489481: RNCC: 5 | RNVC: 2
036 400 009 018: RNCC: 5 | RNVC: 2
036400009018: RNCC: 5 | RNVC: 2

30 Oct 1990

5340-12-389-1530
Expansion Shield

123891530
062470: RNCC: 3 | RNVC: 2
062470: RNCC: 5 | RNVC: 2
2500601086: RNCC: 5 | RNVC: 2
07401345: RNCC: 5 | RNVC: 9

30 May 2012

5340-12-331-2664
Bow Handle

123312664
KF0155855: RNCC: 3 | RNVC: 2
KF015.5855: RNCC: 5 | RNVC: 2
ZBB12454: RNCC: 5 | RNVC: 2

14 Apr 1993

5340-12-383-7609
Dust And Moisture Seal Protective Cap

123837609
F62W7503: RNCC: 3 | RNVC: 2

6 Dec 2010

5340-12-366-2300
Headless Straight Rod

123662300
TLE 271: RNCC: 3 | RNVC: 2

24 Mar 2005

5340-12-162-3821
Spring Tension Clip

121623821
4-69039: RNCC: 3 | RNVC: 2
268671: RNCC: 5 | RNVC: 2
4-69039: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-7640

5340-12-186-6643
Access Cover

121866643
2300109-059130.001.0: RNCC: 2 | RNVC: 2
2300109-059130.001.0: RNCC: 3 | RNVC: 2
2300109-059130-001-0: RNCC: 5 | RNVC: 9
2300109-059130.001.0: RNCC: 5 | RNVC: 9
2300109-059130-001-0: RNCC: 5 | RNVC: 9

26 Jan 1981

5340-12-388-8689
Pipe Hanger

123888689
1003243: RNCC: 3 | RNVC: 2
SK903-043360.000.0: RNCC: 5 | RNVC: 2
4618301114: RNCC: 5 | RNVC: 2

2 May 2012

5340-12-304-7683
Butt Hinge Leaf

123047683
2300126-180001.000.0: RNCC: 2 | RNVC: 2
2300126-180001.000.0: RNCC: 3 | RNVC: 2
2300126-180001.000.0: RNCC: 5 | RNVC: 2
2300126-180001.000.0: RNCC: 5 | RNVC: 9

20 Aug 1985

5340-12-195-0733
Nonmetallic Bumper

121950733
23307-261600.02.0: RNCC: 2 | RNVC: 2
23307-261600.02.0: RNCC: 3 | RNVC: 2
23307-261600-02-0: RNCC: 5 | RNVC: 9

10 Jan 1983

5340-12-184-7580
Electrical-Mechanical Equipment Post

121847580
5801439-1-006: RNCC: 3 | RNVC: 2
5801439-1.006: RNCC: 5 | RNVC: 2

14 Aug 1980

5340-12-335-0504
Nonmetallic Bumper

123350504
451-365000-901-0: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-12-197-5423
Hinge Torsion Bar

121975423
8832297: RNCC: 3 | RNVC: 2
1.748.009: RNCC: 5 | RNVC: 9
1-748-009: RNCC: 5 | RNVC: 9

31 Oct 1983

5340-12-171-1616
Webbing Strap

121711616
23230-172216.000.0: RNCC: 2 | RNVC: 2
81968024016: RNCC: 3 | RNVC: 2
983 044-257: RNCC: 5 | RNVC: 2
02820485: RNCC: 5 | RNVC: 2
2820485UD7103-17: RNCC: 5 | RNVC: 2
23230-172216-000-0: RNCC: 5 | RNVC: 9
23230-172216.000.0: RNCC: 5 | RNVC: 9

12 Sep 1977

5340-12-321-6352
Mounting Bracket

123216352
2300232-069133.000.0: RNCC: 2 | RNVC: 2
2300232-069133.000.0: RNCC: 3 | RNVC: 2
2300232-060014.000.02: RNCC: 5 | RNVC: 9
2300232-060014.000.02: RNCC: 5 | RNVC: 9

11 Jun 1990

5340-12-390-8737
Webbing Strap

123908737
176637-L=500: RNCC: 3 | RNVC: 2
7108851: RNCC: 5 | RNVC: 2

21 Dec 2012

5340-12-363-1692
Mounting Bracket

123631692
136152-6: RNCC: 3 | RNVC: 2

7 May 2004

5340-12-382-4095
Nonmetallic Solid Wheel

123824095
PO151/15G: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-12-381-2944
Mounting Plate

123812944
424-04-K5: RNCC: 3 | RNVC: 2
4250473100318: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-306-6068
Sliding Stay

123066068
28.04.206-010.93: RNCC: 3 | RNVC: 2
284-206-010-930: RNCC: 5 | RNVC: 2

14 Mar 1986

5340-12-331-9023
Case Corner

123319023
DIN7469-A36ZN: RNCC: 2 | RNVC: 2
240 036 Z: RNCC: 3 | RNVC: 2
A36DIN7469VERZINKT: RNCC: 5 | RNVC: 2

5 Jul 1993

5340-12-362-1563
Mounting Plate

123621563
18017-010-001: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-12-361-7678
Mounting Bracket

123617678
2500266-197300.000.0: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-12-162-4802
Rod End Clevis

121624802
100356-101020-10: RNCC: 2 | RNVC: 2
100356-101020-10: RNCC: 5 | RNVC: 2
100356-101020.10: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-178-9427
Dust And Moisture Seal Protective Plug

121789427
258-356: RNCC: 3 | RNVC: 2
63169033: RNCC: 5 | RNVC: 2
3169/033: RNCC: 5 | RNVC: 9

28 May 1979

5340-12-362-6199
Webbing Strap

123626199
79017/026-5000-1000: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-378-4437
Angle Bracket

123784437
42108276: RNCC: 3 | RNVC: 2

7 Apr 2009

5340-12-377-2780
Mounting Bracket

123772780
500398473: RNCC: 3 | RNVC: 2

23 Dec 2008

5340-12-388-9512
Webbing Strap

123889512
1410000206: RNCC: 3 | RNVC: 2

9 May 2012

5340-12-070-1879

5340-12-318-2270
Dust And Moisture Seal Protective Cap

123182270
26F2032: RNCC: 3 | RNVC: 2

22 Jun 1989

5340-12-354-1941
Manual Control Lever

123541941
904031902: RNCC: 3 | RNVC: 2

19 Jun 2001

5340-12-387-1081
Mounting Plate

123871081
500190: RNCC: 3 | RNVC: 2
3002: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-12-091-0918

5340-12-378-2106
Mounting Bracket

123782106
41029996: RNCC: 3 | RNVC: 2

19 Mar 2009

5340-12-141-3305
Coat And Hat Hook

121413305
6210017: RNCC: 3 | RNVC: 2
115.8549: RNCC: 5 | RNVC: 2
1158549: RNCC: 5 | RNVC: 2
47583: RNCC: 5 | RNVC: 2
909665024: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-346-7521
Access Cover

123467521
2760.1050: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-354-4776
Manual Control Handle

123544776
10216: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-12-362-2841
Loop Clamp

123622841
LN9490BK55: RNCC: 2 | RNVC: 2

3 Feb 2004

5340-12-369-5137
Flansch

123695137
5062030839: RNCC: 3 | RNVC: 2
506 203 0839: RNCC: 5 | RNVC: 2
1000115KT: RNCC: 5 | RNVC: 9

14 Jul 2006

5340-12-345-7539
Mounting Bracket

123457539
TA3005P002: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-12-389-0598
Expansion Shield

123890598
073560: RNCC: 3 | RNVC: 2

23 May 2012

5340-12-168-0130
Nut And Bolt Locking Plate

121680130
PAN3409A3: RNCC: 3 | RNVC: 2

9 Feb 1977

5340-12-159-6048
Dust And Moisture Seal Protective Cap

121596048
14021-14006-01: RNCC: 3 | RNVC: 2
893692: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-390-4695
Mechanical Stop

123904695
F1.4553-30-01-60.00-00: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-12-348-7242
Mounting Plate

123487242
504-151190.001: RNCC: 2 | RNVC: 2
9926553: RNCC: 3 | RNVC: 2
504-151190.001: RNCC: 5 | RNVC: 2
504-151190.001: RNCC: 5 | RNVC: 9
9926553: RNCC: 5 | RNVC: 9

10 Aug 1999

5340-12-333-4533
Access Cover

123334533
051599: RNCC: 3 | RNVC: 2

17 Dec 1993

5340-12-315-8867
Dust And Moisture Seal Protective Plug

123158867
6019970986: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-12-308-6831
Lock-Release Lever

123086831
249-44790: RNCC: 3 | RNVC: 2

7 Nov 1986

5340-12-338-4179
Access Door

123384179
5802017-713620.01: RNCC: 2 | RNVC: 2
5802017-713620.01: RNCC: 3 | RNVC: 2

6 Jul 1995

5340-12-027-5312

5340-12-361-0521
Mounting Bracket

123610521
332166: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-12-330-6111
Butt Hinge

123306111
984.000.0003: RNCC: 3 | RNVC: 2
984 000 0003: RNCC: 5 | RNVC: 2
608401: RNCC: 5 | RNVC: 9

18 Jan 1993

5340-12-323-2560
Nut And Bolt Locking Plate

123232560
T13159: RNCC: 3 | RNVC: 2
T13159: RNCC: 5 | RNVC: 9

7 Nov 1990

5340-12-174-4832
Angle Bracket

121744832
7882549: RNCC: 3 | RNVC: 2
7882-549: RNCC: 5 | RNVC: 2
1000025-571000-01: RNCC: 5 | RNVC: 9
1000025-571000.01: RNCC: 5 | RNVC: 9

3 Jul 1978

5340-12-311-3918
Clamping Catch

123113918
DIN3132-D90-K18X46ZN8: RNCC: 2 | RNVC: 2
DIN3132-A90-A3P: RNCC: 5 | RNVC: 2

27 Aug 1987

5340-12-135-6728

5340-12-313-3258
Helical Compression Spring Seat

123133258
617 4415 001: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-12-375-1540
Spring Tension Clip

123751540
L281M2015801: RNCC: 3 | RNVC: 2

28 Apr 2008

5340-12-043-3604

5340-12-302-8686
Webbing Strap

123028686
6600117-270000.00: RNCC: 2 | RNVC: 2
6600117-270000.00: RNCC: 5 | RNVC: 9

5 Feb 1985

5340-12-342-6841
Mounting Bracket

123426841
23-120-JN-82: RNCC: 3 | RNVC: 2

14 Mar 1997

5340-12-327-4182
Access Cover

123274182
C230ZZ30008-000: RNCC: 3 | RNVC: 2

21 Jan 1992

5340-12-316-5195
Angle Bracket

123165195
4900278-103600.00: RNCC: 2 | RNVC: 2
4900278-103600.00: RNCC: 3 | RNVC: 2

23 Jan 1989

5340-12-356-1767
Access Cover

123561767
U60.281000.03-00: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-384-5421
Caster Wheel

123845421
F1.1189-30-10-10.00-37: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-12-315-8785
Nonmetallic Bumper

123158785
5019R-1230: RNCC: 3 | RNVC: 2

3 Dec 1988

5340-12-339-7036
Nonmetallic Bumper

123397036
2500255-000400.006.0: RNCC: 2 | RNVC: 2
2500255-000400.006.0: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-12-188-8042
Loop Clamp

121888042
DIN3016-1-D1-85X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-85X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1.85/20: RNCC: 3 | RNVC: 2
9410720085: RNCC: 5 | RNVC: 2
RSGU1100-85-20: RNCC: 5 | RNVC: 2
RSGU1100.85/20: RNCC: 5 | RNVC: 2
DIN3016-D1-85X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-D85X20-W1: RNCC: 5 | RNVC: 9
VG95931D85X20W1: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-197-5545
Angle Bracket

121975545
P-296801-431: RNCC: 3 | RNVC: 2
P296801-431: RNCC: 5 | RNVC: 2

2 Nov 1983

5340-12-158-4721
Retaining Clip

121584721
54076-0.02: RNCC: 2 | RNVC: 2
R3207.17-2: RNCC: 3 | RNVC: 2
R3207-17-2: RNCC: 5 | RNVC: 2
54076-0-02: RNCC: 5 | RNVC: 9
54076-0.02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-173-7910
Loop Clamp

121737910
P-296652-401: RNCC: 3 | RNVC: 2
P296652-401: RNCC: 5 | RNVC: 2

16 May 1978

5340-12-352-2735
Retaining Strap

123522735
2500238-060100.001.0: RNCC: 2 | RNVC: 2
2500238-060100.001.0: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-12-302-2206
Flush Catch Claw

123022206
T04.2/205B: RNCC: 2 | RNVC: 2
T04.2/205B: RNCC: 5 | RNVC: 9

11 Dec 1984

5340-12-321-9211
Lock-Release Lever

123219211
P-886685-405: RNCC: 3 | RNVC: 2
P886685-405: RNCC: 5 | RNVC: 2

10 Jul 1990

5340-12-702-5253
Mounting Bracket

127025253
VG95211-ML-127025253: RNCC: 2 | RNVC: 2
5.51.7010.0290.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-387-3916
Bail Handle

123873916
GN 798.7-22: RNCC: 3 | RNVC: 2

8 Dec 2011

5340-12-318-1631
Mounting Bracket

123181631
54.0026.187.00: RNCC: 3 | RNVC: 2

16 Jun 1989

5340-12-370-4498
Access Cover

123704498
S533M6034214: RNCC: 2 | RNVC: 2
S533M6034214: RNCC: 3 | RNVC: 2

8 Nov 2006

5340-12-197-1026
Double Angle Bracket

121971026
1000151-249000: RNCC: 2 | RNVC: 2
1000151-249000: RNCC: 3 | RNVC: 2

20 Sep 1983

5340-12-383-7042
Protection Bellows

123837042
1690-5489: RNCC: 3 | RNVC: 2

26 Nov 2010

5340-12-358-9530
Dust And Moisture Seal Protective Cap-Plug

123589530
915042040000: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-316-1903
Mounting Bracket

123161903
4604900143: RNCC: 3 | RNVC: 2

30 Dec 1988

5340-12-332-2578
Plain Solid Disk

123322578
2410030024: RNCC: 3 | RNVC: 2

27 Jul 1993

5340-12-345-6396
Mounting Bracket

123456396
TA3024G001: RNCC: 3 | RNVC: 2

7 Apr 1998

5340-12-315-1878
Angle Bracket

123151878
3854760836: RNCC: 3 | RNVC: 2
385 476 08 36: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-359-7796
Hand Crank

123597796
202614: RNCC: 3 | RNVC: 2

10 Mar 2003

5340-12-315-3770
Manual Control Handle

123153770
1012122: RNCC: 3 | RNVC: 2
012122: RNCC: 5 | RNVC: 9

18 Oct 1988

5340-12-353-6877
Multiple Angle Bracket

123536877
J92222558-401: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-383-1432
Corrosion Preventive Anode

123831432
F1.2511-10-15-00.00-00: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-12-184-7562
Friction Catch

121847562
5800583-570000-210: RNCC: 3 | RNVC: 2
5800583-570000.210: RNCC: 5 | RNVC: 2

14 Aug 1980

5340-12-363-4670
Mending Plate

123634670
0223 3462: RNCC: 3 | RNVC: 2

17 Jun 2004

5340-12-185-8641
Rod End Clevis

121858641
A11A174130302: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-12-304-0758
Retaining Strap

123040758
81974010408: RNCC: 3 | RNVC: 2

10 Jun 1985

5340-12-094-6274

5340-12-192-6110
Lock-Release Lever

121926110
632-738000.07.0: RNCC: 3 | RNVC: 2
632-738000-07-0: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-179-5488
Mounting Plate

121795488
C381-A27-C90: RNCC: 2 | RNVC: 2
C381A27C90: RNCC: 3 | RNVC: 2
C381-A27-C90: RNCC: 5 | RNVC: 2
381-A27-C90: RNCC: 5 | RNVC: 2
C381A27C90: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-149-8378
Resilient Mount

121498378
DIN95363-E40X30-M10X20-NR45ST: RNCC: 4 | RNVC: 1
515000-40X30-M10X20.NR45.ST: RNCC: 5 | RNVC: 2
5L6671-001-09: RNCC: 5 | RNVC: 2
5LV6671-001-09: RNCC: 5 | RNVC: 2
BK6-40-24N: RNCC: 5 | RNVC: 9
BK6-40-280: RNCC: 5 | RNVC: 9
N1170-27-280: RNCC: 5 | RNVC: 9
VG95363-E40X30-M10X20-NR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-6355
Angle Bracket

123016355
43712099-601: RNCC: 2 | RNVC: 2
43712099-601: RNCC: 3 | RNVC: 2
43712099-601: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-301-6371
Double Angle Bracket

123016371
43712277-601: RNCC: 2 | RNVC: 2
43712277-601: RNCC: 3 | RNVC: 2
43712277-601: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-360-0878
Butt Hinge Leaf

123600878
T531M5501208: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-386-0912
Expansion Shield

123860912
NO PRIMARY REF 12-386-0912: RNCC: 3 | RNVC: 2
O50243: RNCC: 5 | RNVC: 2
2500601557: RNCC: 5 | RNVC: 2
050243: RNCC: 5 | RNVC: 2

8 Aug 2011

5340-12-144-9613
Mending Plate

121449613
SPANNZUNGELN9293-32: RNCC: 2 | RNVC: 2
SPANNZUNGE32LN9293: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-8462
Retaining Strap

123058462
127-01/72673: RNCC: 3 | RNVC: 2
127-01/72673: RNCC: 5 | RNVC: 9

23 Dec 1985

5340-12-307-4489
Manual Control Handle

123074489
022582: RNCC: 3 | RNVC: 2
00638174: RNCC: 5 | RNVC: 2
85-692-5624: RNCC: 6 | RNVC: 9

19 Jun 1986

5340-12-701-5238
Retaining Strap

127015238
VG95211-ML-127015238: RNCC: 2 | RNVC: 2
5.12.6101.0030.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-1681
Mounting Bracket

127011681
VG95211-ML-127011681: RNCC: 2 | RNVC: 2
5.12.0237.1640.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-159-8660
Antipilferage Seal Locking Wire

121598660
DIN1367-0,3-0,3-STZN: RNCC: 2 | RNVC: 2
0,3-0,3DIN1367-STZN: RNCC: 5 | RNVC: 2
0-9X0-3DIN1367VERZINKT: RNCC: 5 | RNVC: 2
DIN1367-0,9X0,3-A2P: RNCC: 5 | RNVC: 2
DIN1367-0,9X0,3-VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-352-7221
Mounting Bracket

123527221
1240 0056: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-024-7465

5340-12-303-8702
Leather Strap

123038702
CF 478 173: RNCC: 3 | RNVC: 2
CF 478 173: RNCC: 5 | RNVC: 2

10 May 1985

5340-12-011-4398

5340-12-020-4841

5340-12-355-6440
Multiple Angle Bracket

123556440
4616890914: RNCC: 3 | RNVC: 2

30 Nov 2001

5340-12-373-8579
Casement Fastener

123738579
9BEZ005493P2: RNCC: 3 | RNVC: 2

13 Dec 2007

5340-12-010-7458

5340-12-133-4040

5340-12-157-1799
Resilient Mount

121571799
1201001009: RNCC: 3 | RNVC: 2
HERMA II,910TG,OELSCHUTZ,H24: RNCC: 5 | RNVC: 2
352250015782: RNCC: 5 | RNVC: 2
VBE424-49: RNCC: 5 | RNVC: 2
H24AUSFTG0ELSCHUTZANSTRICH: RNCC: 5 | RNVC: 9
HERMA II,INDEX910TGOELSCHUTZ: RNCC: 5 | RNVC: 9
HERMAHHTG910B40ELSCHUTZANSTRICH: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-6999
Mending Plate

123216999
C249-A29-B20: RNCC: 2 | RNVC: 2
C249-A29-B20: RNCC: 3 | RNVC: 2

18 Jun 1990

5340-12-199-4199
Flush Catch Claw

121994199
2300088-311107.00: RNCC: 2 | RNVC: 2
2300088-311107-00: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-348-9477
Mounting Bracket

123489477
245/7397-01-10-00: RNCC: 3 | RNVC: 2

6 Sep 1999

5340-12-328-5353
Angle Bracket

123285353
2300354-949911: RNCC: 2 | RNVC: 2
07655-940020-00: RNCC: 5 | RNVC: 9

28 May 1992

5340-12-321-4258
Double Angle Bracket

123214258
5802295-100000.03: RNCC: 2 | RNVC: 2
FZ78005 91003: RNCC: 3 | RNVC: 2

17 May 1990

5340-12-364-8872
Angle Bracket

123648872
5160-311110A01B: RNCC: 2 | RNVC: 2
5160-311110A01B: RNCC: 3 | RNVC: 2

12 Nov 2004

5340-12-121-0620
Dust And Moisture Seal Protective Cap

121210620
0009976881: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-331-7142
Lock-Release Lever

123317142
6372017: RNCC: 3 | RNVC: 2

14 Jun 1993

5340-12-383-3257
Bumper

123833257
027099333: RNCC: 1 | RNVC: 2
027099333: RNCC: 3 | RNVC: 2

7 Oct 2010

5340-12-130-1977

5340-12-345-9755
Retaining Bail

123459755
52.0271.915.02: RNCC: 3 | RNVC: 2

26 May 1998

5340-12-350-1482
Butt Hinge Leaf

123501482
LN9172KF375: RNCC: 2 | RNVC: 2

21 Feb 2000

5340-12-316-6744
Mounting Bracket

123166744
5800777-8230.02: RNCC: 2 | RNVC: 2
5800777-8230.02: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-041-0746

5340-12-149-0946
Pipe Hanger Extension Bar

121490946
121F10002: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-392-0757
Dust And Moisture Seal Protective Plug

123920757
915042009002: RNCC: 3 | RNVC: 2

2 May 2013

5340-12-185-6139
Nonmetallic Bumper

121856139
2300109-034100.008.0: RNCC: 2 | RNVC: 2
2300109-034100.008.0: RNCC: 3 | RNVC: 2
2300109-034100.008.0: RNCC: 3 | RNVC: 2
2300109-034100-008-0: RNCC: 5 | RNVC: 2
2300109-034100-008-0: RNCC: 5 | RNVC: 9
2300109-034100.008.0: RNCC: 5 | RNVC: 9
2300109-034100-008-0: RNCC: 5 | RNVC: 9

18 Oct 1980

5340-12-362-9039
Butt Hinge

123629039
072938: RNCC: 3 | RNVC: 2

14 Apr 2004

5340-12-363-7045
Mounting Plate

123637045
T621P5002123: RNCC: 3 | RNVC: 2

16 Jul 2004

5340-12-172-7531
Loop Clamp

121727531
DIN3016-1-D2-8-8X20-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.2X8/20: RNCC: 3 | RNVC: 2
DIN3016-D2-8-8X20-W1-2: RNCC: 3 | RNVC: 2
4219220008: RNCC: 5 | RNVC: 2
RSGU1100-2X8-20: RNCC: 5 | RNVC: 2
RSGU1100.2X8/20: RNCC: 5 | RNVC: 2
DIN3016-D2-8-8X20-W1-2: RNCC: 5 | RNVC: 9

20 Feb 1978

5340-12-092-2659

5340-12-344-4733
Mounting Bracket

123444733
P-230729-018: RNCC: 3 | RNVC: 2
P230729-018: RNCC: 5 | RNVC: 2

30 Oct 1997

5340-12-155-7459
Resilient Mount

121557459
80708301: RNCC: 3 | RNVC: 2
420-105-B-00.00: RNCC: 3 | RNVC: 2
420-105B00-00: RNCC: 5 | RNVC: 2
420-105-B-00.00: RNCC: 5 | RNVC: 2
845.420-105B00-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-5377
Mounting Plate

127015377
VG95211-ML-127015377: RNCC: 2 | RNVC: 2
5.12.6107.0100.21: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-9428
Metal Runner

123219428
702-241500-957-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-701-7526
Mounting Plate

127017526
VG95211-ML-127017526: RNCC: 2 | RNVC: 2
5.12.7615.8510.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-346-8750
Handwheel

123468750
240MM 25MM PN19: RNCC: 3 | RNVC: 2

22 Sep 1998

5340-12-350-2278
Manual Control Lever

123502278
6737230046: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-12-370-8506
Mounting Bracket

123708506
862904310: RNCC: 2 | RNVC: 2
862904310: RNCC: 3 | RNVC: 2

10 Jan 2007

5340-12-371-8031
Retaining Strap

123718031
0659050410: RNCC: 3 | RNVC: 2

16 May 2007

5340-12-340-4377
Mounting Bracket

123404377
463-611101.076: RNCC: 3 | RNVC: 9
9870807: RNCC: 5 | RNVC: 9

13 Apr 1996

5340-12-163-3783
Mending Plate

121633783
4030182240: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-168-2846
Angle Bracket

121682846
4020960340: RNCC: 3 | RNVC: 2

4 Mar 1977

5340-12-190-6792
Quick Release Plunger

121906792
2.9802-0239.1: RNCC: 3 | RNVC: 2
2-9802-0239-1: RNCC: 5 | RNVC: 2

8 Dec 1981

5340-12-193-9541
Loop Clamp

121939541
4-91509/505: RNCC: 3 | RNVC: 2
4-91509/505-00000-39: RNCC: 5 | RNVC: 2
CL-32456/33: RNCC: 5 | RNVC: 2

20 Sep 1982

5340-12-300-9426
Angle Bracket

123009426
01TC34669: RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-193-9456
Angle Bracket

121939456
4212950040: RNCC: 3 | RNVC: 2

16 Sep 1982

5340-12-309-7775
Access Cover

123097775
5058880: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-379-9380
Mounting Bracket

123799380
1558028: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-12-134-8189

5340-12-324-5292
Hinge Torsion Bar

123245292
9114965: RNCC: 3 | RNVC: 2

27 Feb 1991

5340-12-371-9726
Multiple Angle Bracket

123719726
S283M3007101: RNCC: 2 | RNVC: 2
S283M3007101: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-12-379-4100
Mounting Plate

123794100
4405220729: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-12-011-5237

5340-12-348-6263
Flush Lock

123486263
7068-44400-000-2: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-12-701-5287
Mounting Bracket

127015287
VG95211-ML-127015287: RNCC: 2 | RNVC: 2
5.12.6105.0010.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-315-8830
Spring Holder

123158830
111-00-8832-0573/01-28: RNCC: 2 | RNVC: 2
1000232-01-02-03: RNCC: 3 | RNVC: 2
111-00-8832-0573/01-28: RNCC: 5 | RNVC: 9
1000230-01-02-03: RNCC: 5 | RNVC: 9

3 Dec 1988

5340-12-152-6507
Compression Cup

121526507
199036-217410.11: RNCC: 2 | RNVC: 2
2262000024: RNCC: 3 | RNVC: 2
34K/01-12/2174-01-00-11: RNCC: 5 | RNVC: 2
199036-217410-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-189-9129
Angle Bracket

121899129
35 758-001: RNCC: 3 | RNVC: 2
35 758 001: RNCC: 5 | RNVC: 2
35758-001: RNCC: 5 | RNVC: 9

26 Oct 1981

5340-12-327-7308
Angle Bracket

123277308
2653-122000.03: RNCC: 2 | RNVC: 2
2653-122000.03: RNCC: 3 | RNVC: 2
2653-122000.03: RNCC: 5 | RNVC: 9
2304-120230.03: RNCC: 5 | RNVC: 9

25 Feb 1992

5340-12-320-8783
Hand Crank

123208783
2654-338300.00: RNCC: 2 | RNVC: 2
2654-338300.00: RNCC: 3 | RNVC: 2
2654-338 300.00: RNCC: 5 | RNVC: 9
679-10030000: RNCC: 5 | RNVC: 9
679-10030000: RNCC: 5 | RNVC: 9

1 Mar 1990

5340-12-393-2919
Angle Bracket

123932919
J92228359-402: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-337-1519
Helical Compression Spring Seat

123371519
11.11372-0025: RNCC: 3 | RNVC: 2
11.11372-0025: RNCC: 5 | RNVC: 2
11113720025: RNCC: 5 | RNVC: 2
F11.11372-0025: RNCC: 5 | RNVC: 2

25 Jan 1995

5340-12-165-8357
Retaining Strap

121658357
2500001-197500.00.0: RNCC: 2 | RNVC: 2
2500001-197500-00-0: RNCC: 5 | RNVC: 2
2500001-197500-00-0: RNCC: 5 | RNVC: 9

2 Jul 1976

5340-12-360-1216
Door Button

123601216
1000-223: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-345-7768
Hand Crank

123457768
2125-129542A00C: RNCC: 2 | RNVC: 2
2125-129542A00C: RNCC: 3 | RNVC: 2

23 Apr 1998

5340-12-193-3921
Double Angle Bracket

121933921
5801421-01142: RNCC: 3 | RNVC: 2

19 Jul 1982

5340-12-196-3224
Nonmetallic Bumper

121963224
3418426EE5022-71: RNCC: 3 | RNVC: 2
341-8426EE5022-71: RNCC: 5 | RNVC: 2
3418426: RNCC: 5 | RNVC: 2
5146-71-05-04: RNCC: 5 | RNVC: 2
5146-71-05.04: RNCC: 5 | RNVC: 2
E5146-71-05.04: RNCC: 5 | RNVC: 2

27 Jun 1983

5340-12-193-3447
Retaining Clip

121933447
844-30-113101000-1A: RNCC: 3 | RNVC: 2
1A844.30-11-31-01-000: RNCC: 5 | RNVC: 2
844.30-11-31-01-000-1A: RNCC: 5 | RNVC: 2

13 Jul 1982

5340-12-142-8981
Retaining Strap

121428981
8403390: RNCC: 3 | RNVC: 2
0047-169: RNCC: 5 | RNVC: 2
0047169: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-302-9813
Angle Bracket

123029813
2300147-262910.000.0: RNCC: 2 | RNVC: 2
2300147-262910.000.0: RNCC: 3 | RNVC: 2
2300147-262910-000-0: RNCC: 5 | RNVC: 9
2300147-262910.000.0: RNCC: 5 | RNVC: 9

15 Feb 1985

5340-12-177-4361
Retaining Strap

121774361
8HS400107-00: RNCC: 3 | RNVC: 2

31 Jan 1979

5340-12-379-9304
Mounting Bracket

123799304
SGT250-DRW 6544340-ITEM 13: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-12-393-8521
Helical Compression Spring Seat

123938521
1-34-25951-250: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-12-305-0582
Angle Bracket

123050582
A-296712-139: RNCC: 3 | RNVC: 2
A296712-139: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-196-9608
Antipilferage Seal

121969608
YK3.0589.01.8.0001: RNCC: 3 | RNVC: 2
1204 2344: RNCC: 3 | RNVC: 2
12042344: RNCC: 5 | RNVC: 2
3.0589.01.8.0001: RNCC: 5 | RNVC: 2
26.12-191: RNCC: 5 | RNVC: 9
3.0589.01.8.0001: RNCC: 5 | RNVC: 9

5 Sep 1983

5340-12-378-5022
Spring Tension Clip

123785022
774-136-90: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-12-313-4479
Resilient Mount

123134479
5718215/11MN55: RNCC: 3 | RNVC: 2
5718215-55SHORE A: RNCC: 5 | RNVC: 2

31 Mar 1988

5340-12-198-0582
Compression Cup

121980582
537171-8322.000: RNCC: 3 | RNVC: 2
53 71 71-8322: RNCC: 5 | RNVC: 9
53 71 71-8322: RNCC: 5 | RNVC: 9
537171-8322.000: RNCC: 5 | RNVC: 9
537171-8322: RNCC: 5 | RNVC: 9

15 Dec 1983

5340-12-196-2536
Access Cover

121962536
03469700: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-354-8628
Door Handle

123548628
2844073233: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-336-9172
Dust And Moisture Seal Protective Plug

123369172
81960200235: RNCC: 3 | RNVC: 2
81.96002.0235: RNCC: 5 | RNVC: 2
2064: RNCC: 5 | RNVC: 2
FT 470 81 323 030 63: RNCC: 5 | RNVC: 2

28 Dec 1994

5340-12-365-3233
Mounting Bracket

123653233
S991M5074101: RNCC: 2 | RNVC: 2
S991M5074101: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-386-1382
Rod End Clevis

123861382
4000724: RNCC: 3 | RNVC: 2
461750414: RNCC: 5 | RNVC: 2

10 Aug 2011

5340-12-329-5624
Angle Bracket

123295624
0968101: RNCC: 3 | RNVC: 2

1 Sep 1992

5340-12-040-1299

5340-12-332-0659
Bow Handle

123320659
7238079: RNCC: 3 | RNVC: 2
723.8079: RNCC: 5 | RNVC: 2

20 Jul 1993

5340-12-094-1136

5340-12-345-3712
Access Cover

123453712
54.0053.172.00: RNCC: 3 | RNVC: 2

10 Mar 1998

5340-12-315-1408
Dust And Moisture Seal Protective Cap

123151408
01TC34924: RNCC: 3 | RNVC: 2

22 Sep 1988

5340-12-010-2331

5340-12-377-1984
Flush Lock

123771984
23.0110.010.03 INDEX 00: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-12-370-7329
Retaining Clip

123707329
1JO127250: RNCC: 3 | RNVC: 2

14 Dec 2006

5340-12-394-6176
Access Cover

123946176
T531M3414102: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-12-335-9932
Spring Tension Clip

123359932
KK11945ZIBIC: RNCC: 3 | RNVC: 2
11945: RNCC: 5 | RNVC: 2

10 Oct 1994

5340-12-347-6392
Mounting Bracket

123476392
938491.30: RNCC: 3 | RNVC: 2

20 Jan 1999

5340-12-133-2949

5340-12-155-1151
Butt Hinge Leaf

121551151
160-24775-25: RNCC: 3 | RNVC: 2
160-24775-25: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-9069
Retaining Strap

123069069
23114-190000.15: RNCC: 2 | RNVC: 2
23114-190000.15: RNCC: 3 | RNVC: 2
23114-190000.15: RNCC: 5 | RNVC: 9

16 Apr 1986

5340-12-322-6460
Angle Bracket

123226460
42205253: RNCC: 3 | RNVC: 2
42205253EZ5003-09: RNCC: 5 | RNVC: 2

10 Sep 1990

5340-12-303-1377
Loop Clamp

123031377
KMP GTR 17.50-1: RNCC: 3 | RNVC: 2

28 Feb 1985

5340-12-312-2211
Mending Plate

123122211
1000093-32600.05.0: RNCC: 2 | RNVC: 2
1000093-32600.05.0: RNCC: 3 | RNVC: 2

4 Dec 1987

5340-12-381-0391
Angle Bracket

123810391
1030020-252000.032.0: RNCC: 2 | RNVC: 2
1030020-252000.032.0: RNCC: 3 | RNVC: 2

4 Jan 2010

5340-12-171-7693
Angle Bracket

121717693
81974860290: RNCC: 3 | RNVC: 2

11 Nov 1977

5340-12-197-2065
Mending Plate

121972065
4256200011: RNCC: 3 | RNVC: 2

29 Sep 1983

5340-12-308-5517
Loop Clamp

123085517
2705801: RNCC: 3 | RNVC: 2

22 Oct 1986

5340-12-022-9441

5340-12-340-5193
Lock-Release Lever

123405193
5900740027: RNCC: 3 | RNVC: 2
5900740027: RNCC: 5 | RNVC: 2
5900740027: RNCC: 5 | RNVC: 2

25 Apr 1996

5340-12-319-1310
Door Button

123191310
731.43.234: RNCC: 3 | RNVC: 2
V731.43.234: RNCC: 5 | RNVC: 2

11 Sep 1989

5340-12-319-1050
Nonmetallic Bumper

123191050
CF 446 808: RNCC: 3 | RNVC: 2
CF 446 808: RNCC: 5 | RNVC: 2

8 Sep 1989

5340-12-320-4134
Shimmy Damper

123204134
010 871 TA: RNCC: 3 | RNVC: 2

12 Jan 1990

5340-12-316-7319
Pipe Bracket

123167319
51-53210: RNCC: 3 | RNVC: 2

8 Feb 1989

5340-12-391-7085
Angle Bracket

123917085
6338120414: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-12-302-9756
Sealing Plug Assembly

123029756
0289 3520: RNCC: 3 | RNVC: 2
2893520: RNCC: 5 | RNVC: 2

13 Feb 1985

5340-12-306-6283
Strap Fastener Loop

123066283
6030038: RNCC: 3 | RNVC: 2

17 Mar 1986

5340-12-318-4685
Mounting Bracket

123184685
81083405152: RNCC: 3 | RNVC: 2
81.08340.5152: RNCC: 5 | RNVC: 2

18 Jul 1989

5340-12-319-7516
Electrical-Mechanical Equipment Post

123197516
6516903: RNCC: 3 | RNVC: 2
6510903: RNCC: 5 | RNVC: 2

31 Oct 1989

5340-12-177-0885
Butt Hinge Leaf

121770885
183885995: RNCC: 3 | RNVC: 2

15 Jan 1979

5340-12-198-7248
Clamping Catch

121987248
27 0322 033: RNCC: 2 | RNVC: 2
9837701: RNCC: 3 | RNVC: 2
27 0322 033: RNCC: 5 | RNVC: 9
9837701: RNCC: 5 | RNVC: 9
270322033: RNCC: 5 | RNVC: 9

22 Feb 1984

5340-12-335-3107
Double Angle Bracket

123353107
0048-222000A05B: RNCC: 2 | RNVC: 2
0048-222000A05B: RNCC: 3 | RNVC: 2

9 Aug 1994

5340-12-388-8604
Dust And Moisture Seal Protective Plug

123888604
2315-3027: RNCC: 3 | RNVC: 2

2 May 2012

5340-12-307-6157
Lock-Release Lever

123076157
TL4210-0113-730: RNCC: 2 | RNVC: 2
6.132-0053-00-3: RNCC: 3 | RNVC: 2
6.132-0053-00-3: RNCC: 3 | RNVC: 2
6.132-0053-00-3: RNCC: 3 | RNVC: 2
6-132-0053-00-3: RNCC: 5 | RNVC: 2
6-132-0053-00-3: RNCC: 5 | RNVC: 9

9 Jul 1986

5340-12-187-6286
Dust And Moisture Seal Protective Plug

121876286
4-062-2/12500: RNCC: 3 | RNVC: 2
4-062-2-12500: RNCC: 5 | RNVC: 9
4-062-2/12500: RNCC: 5 | RNVC: 9

21 Apr 1981

5340-12-329-5940
Angle Bracket

123295940
158102: RNCC: 2 | RNVC: 2
158102: RNCC: 3 | RNVC: 2

5 Sep 1992

5340-12-323-9066
Mounting Bracket

123239066
40 0176 515: RNCC: 2 | RNVC: 2
40 0176 515: RNCC: 3 | RNVC: 2
40 0176 515: RNCC: 5 | RNVC: 9

8 Jan 1991

5340-12-378-5931
Mounting Bracket

123785931
9258741008: RNCC: 3 | RNVC: 2

23 Apr 2009

5340-12-378-0001
Dust And Moisture Seal Protective Cover

123780001
504236525: RNCC: 3 | RNVC: 2

4 Mar 2009

5340-12-021-7909

5340-12-374-2941
Loop Clamp

123742941
5323678: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-176-8615
Dust And Moisture Seal Protective Plug

121768615
11321250267: RNCC: 3 | RNVC: 9

20 Dec 1978

5340-12-345-1882
Spring Tension Clip

123451882
81976400257: RNCC: 3 | RNVC: 2

10 Feb 1998

5340-12-346-6471
Webbing Strap

123466471
2300279-4699.00: RNCC: 2 | RNVC: 2
2300279-4699.00: RNCC: 3 | RNVC: 2
9869817: RNCC: 5 | RNVC: 2
9869817: RNCC: 5 | RNVC: 9
2300279-4699.00: RNCC: 5 | RNVC: 9

20 Aug 1998

5340-12-199-1399
Angle Bracket

121991399
5801435-050100-02: RNCC: 3 | RNVC: 2

29 Mar 1984

5340-12-326-6271
Retaining Strap

123266271
153-500-03: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-12-376-6357
Loop Clamp

123766357
RSGU1.28/15-W5-SILIKON: RNCC: 3 | RNVC: 2

23 Oct 2008

5340-12-386-0124
Loop Clamp

123860124
5351400077: RNCC: 3 | RNVC: 2

29 Jul 2011

5340-12-177-7966
Flush Bolt

121777966
2300002-181044.002: RNCC: 2 | RNVC: 2
2300002-181044.002: RNCC: 3 | RNVC: 2
2300002-181044-002: RNCC: 5 | RNVC: 9
2300002-181044.002: RNCC: 5 | RNVC: 9

21 Feb 1979

5340-12-177-9534
Mounting Bracket

121779534
2300002-204064.000: RNCC: 2 | RNVC: 2
2300002-204064.000: RNCC: 3 | RNVC: 2
2300002-204064: RNCC: 5 | RNVC: 9
2300002-204064: RNCC: 5 | RNVC: 9

9 Mar 1979

5340-12-347-6038
Mounting Bracket

123476038
8854 131-201: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-196-4522
Bridge Clamp

121964522
C22117-A163-C8: RNCC: 3 | RNVC: 2
C22117A163C8: RNCC: 5 | RNVC: 2

7 Jul 1983

5340-12-188-8829
Dust And Moisture Seal Protective Cap

121888829
5400014-1000.01: RNCC: 2 | RNVC: 2
5400014-1000-01: RNCC: 5 | RNVC: 9
5400014-1000.01: RNCC: 5 | RNVC: 9

6 Aug 1981

5340-12-701-9677
Angle Bracket

127019677
VG95211-ML-127019677: RNCC: 2 | RNVC: 2
01.7208.5310: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-134-5220
Escutcheon Plate

121345220
5565-06-06-08: RNCC: 3 | RNVC: 2
3444702: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-340-7821
Access Cover

123407821
5801984-200340.000.0: RNCC: 2 | RNVC: 2
5801984-200340.000.0: RNCC: 3 | RNVC: 2
5801984-200340.000.0: RNCC: 3 | RNVC: 2
5801984-200340.000.0: RNCC: 5 | RNVC: 2
7800752635: RNCC: 5 | RNVC: 2
5801984-200340.000.0: RNCC: 5 | RNVC: 2
78007 52635: RNCC: 5 | RNVC: 9

12 Jun 1996

5340-12-128-8832
Compression Cup

121288832
T30-37 30X18X5/1,5-88NBR/101: RNCC: 3 | RNVC: 2
T30-37: RNCC: 5 | RNVC: 2
T30-37-88NBR101: RNCC: 5 | RNVC: 2
6-0495-15-0-3001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-6924
Mounting Plate

127016924
VG95211-ML-127016924: RNCC: 2 | RNVC: 2
5.12.7220.2680.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-4245
Mounting Bracket

127024245
VG95211-ML-127024245: RNCC: 2 | RNVC: 2
5.12.7208.8005.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-3320
Retaining Strap

123653320
2500267-195010.000.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-335-9145
Swivel Caster

123359145
2470DIK100P60: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-12-346-2713
Anschlagecke

123462713
10.0000.093: RNCC: 2 | RNVC: 2
10.0000.093: RNCC: 3 | RNVC: 2

6 Jul 1998

5340-12-345-7951
Access Cover

123457951
TA3014P001: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-12-384-6947
Loop Clamp

123846947
10027885: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-12-369-2244
Mounting Bracket

123692244
AF00348: RNCC: 3 | RNVC: 2

7 Jun 2006

5340-12-331-8975
Lock-Release Lever

123318975
10832501: RNCC: 3 | RNVC: 2
EZ108325: RNCC: 5 | RNVC: 2

2 Jul 1993

5340-12-343-4311
Webbing Strap

123434311
46079005966141: RNCC: 3 | RNVC: 2

19 Jun 1997

5340-12-357-8143
Angle Bracket

123578143
2300042-255260.004: RNCC: 2 | RNVC: 2
9941631: RNCC: 3 | RNVC: 2
2300042-255260.004: RNCC: 5 | RNVC: 2

29 Jul 2002

5340-12-025-8896

5340-12-380-5063
Elastic Strap

123805063
P20615NM: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-12-022-6240

5340-12-172-1706
Rim Lock

121721706
3299AZLAD: RNCC: 3 | RNVC: 2

27 Dec 1977

5340-12-341-6514
Helical Compression Spring Seat

123416514
03645100: RNCC: 3 | RNVC: 2
03645100.504: RNCC: 5 | RNVC: 2

10 Oct 1996

5340-12-345-9026
Mechanical Stop

123459026
E24501: RNCC: 3 | RNVC: 2

14 May 1998

5340-12-301-7538
Spring Tension Clip

123017538
JJ54475: RNCC: 3 | RNVC: 2

7 Nov 1984

5340-12-342-7475
Webbing Strap

123427475
779032577: RNCC: 3 | RNVC: 2
3201-792.02.01.105-000: RNCC: 5 | RNVC: 2
000-F5-25X2,0X2900-PE-RAL6031: RNCC: 6 | RNVC: 9

24 Mar 1997

5340-12-702-5889
Mounting Bracket

127025889
VG95211-ML-127025889: RNCC: 2 | RNVC: 2
5.51.9205.0400.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-198-1150
Handwheel

121981150
VG85089-A-200X17-GT: RNCC: 2 | RNVC: 2
VG85089-A-200X17-GT: RNCC: 3 | RNVC: 2
VG85089-A-200X17-GT: RNCC: 3 | RNVC: 2
VG85089-A-200X17-GT: RNCC: 3 | RNVC: 9
A200X17VG85089GTW40: RNCC: 5 | RNVC: 9

21 Dec 1983

5340-12-361-7874
Mounting Bracket

123617874
1960-010500.000.0: RNCC: 3 | RNVC: 2

18 Nov 2003

5340-12-380-0163
Mounting Plate

123800163
598101-183409.000.0: RNCC: 2 | RNVC: 2
598101-183409.000.0: RNCC: 3 | RNVC: 2

18 Sep 2009

5340-12-312-6988
Metal Runner

123126988
6100108-1760.02: RNCC: 2 | RNVC: 2
6100108-1760.02: RNCC: 3 | RNVC: 2

28 Jan 1988

5340-12-356-5088
Mounting Bracket

123565088
J92222552-005: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-702-2155
Mounting Plate

127022155
VG95211-ML-127022155: RNCC: 2 | RNVC: 2
30.7222.122: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-163-4805
Resilient Mount

121634805
6780-4 M5 C: RNCC: 3 | RNVC: 2
352250014677: RNCC: 5 | RNVC: 2
6780-4 M5 C: RNCC: 5 | RNVC: 9
6780-4M5C: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-351-2297
Nonmetallic Bumper

123512297
2812-022200.012.0: RNCC: 2 | RNVC: 2
2812-022200.012.0: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-330-3324
Hinge Torsion Bar

123303324
222-5-003: RNCC: 3 | RNVC: 2
222-5-003: RNCC: 3 | RNVC: 2
222-5-003: RNCC: 5 | RNVC: 2
222-5-003: RNCC: 5 | RNVC: 2
222-5-003: RNCC: 5 | RNVC: 9

3 Dec 1992

5340-12-314-9127
Lock-Release Lever

123149127
06410-2083: RNCC: 3 | RNVC: 2
0120800003: RNCC: 3 | RNVC: 2
01208.00 GRAU: RNCC: 5 | RNVC: 2
NLM641-2083: RNCC: 5 | RNVC: 9
NLM6410-2083: RNCC: 5 | RNVC: 9

26 Aug 1988

5340-12-319-7448
Clamping Catch

123197448
5802295-105000: RNCC: 2 | RNVC: 2
7800591100: RNCC: 3 | RNVC: 2
452-305000-000-0: RNCC: 5 | RNVC: 2
78005 91100: RNCC: 5 | RNVC: 9

31 Oct 1989

5340-12-382-8243
Loop Clamp

123828243
DIN3016-1-D1-45X20-W1-2-EPDM: RNCC: 2 | RNVC: 2
RSGU1.45/20-W1: RNCC: 3 | RNVC: 2
09410020045: RNCC: 5 | RNVC: 2

12 Aug 2010

5340-12-189-7687
Handwheel

121897687
B125X11VG85084RG5: RNCC: 2 | RNVC: 2
VG85084-B-125X11-2.1096.01: RNCC: 2 | RNVC: 2
VG85084-B-125X11-2.1096.01: RNCC: 3 | RNVC: 2
VG85084-B-125X11-2.1096.01: RNCC: 3 | RNVC: 2
VG85084-B-125X11-2.1096.01: RNCC: 3 | RNVC: 9
B125X11VG85084-RG5: RNCC: 5 | RNVC: 2
B125X11VG85084GCUSN5ZNPB: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-12-132-5609
Resilient Mount

121325609
DIN95363-A25X10-M6X16-NR60ST: RNCC: 2 | RNVC: 2
GG26MITTEL: RNCC: 5 | RNVC: 2
1.25.10.1.60NR/ST-M6X16: RNCC: 5 | RNVC: 2
500025-M6X16.NR60.ST: RNCC: 5 | RNVC: 2
811.000.025.010.06X16.NR60.ST: RNCC: 5 | RNVC: 2
81100-25X10-M6X16.NR60.ST: RNCC: 5 | RNVC: 2
57810610015: RNCC: 5 | RNVC: 2
781061MITTEL: RNCC: 5 | RNVC: 2
VG95363-A25X10-M6X16-NR60ST: RNCC: 5 | RNVC: 9
VG95363-A25X10-NR60ST-M6X16: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-6814
Access Cover

123566814
3D4-VV128-00-1: RNCC: 3 | RNVC: 2

22 Mar 2002

5340-12-338-6917
Webbing Strap

123386917
463-151493.000: RNCC: 3 | RNVC: 2
463-151493.000: RNCC: 5 | RNVC: 9
9897798: RNCC: 5 | RNVC: 9

16 Aug 1995

5340-12-174-2932
Loop Clamp

121742932
DIN3016-1-E2-10-15X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E2-10-15X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.10-15/15: RNCC: 3 | RNVC: 2
4209102010: RNCC: 5 | RNVC: 2
RSGU10-15-15: RNCC: 5 | RNVC: 2
RSGU10-15/15: RNCC: 5 | RNVC: 2
DIN3016-E2-10-15X15-W1-2: RNCC: 5 | RNVC: 9

21 Jun 1978

5340-12-378-4428
Loop Clamp

123784428
DIN3016-1-D1-67X25-W1-2-NBR: RNCC: 2 | RNVC: 2

7 Apr 2009

5340-12-341-2295
Dust And Moisture Seal Protective Plug

123412295
300350201220: RNCC: 3 | RNVC: 2
300350201220-4: RNCC: 5 | RNVC: 2
0009880828: RNCC: 5 | RNVC: 2

10 Aug 1996

5340-12-191-8411
Retaining Band

121918411
1204 7822: RNCC: 3 | RNVC: 2
3.602.0.977.016.5: RNCC: 5 | RNVC: 9
3.602.0.977.016.5: RNCC: 5 | RNVC: 9
1204 7822: RNCC: 5 | RNVC: 9
12047822: RNCC: 5 | RNVC: 9
3-602-0-977-016-5: RNCC: 5 | RNVC: 9

9 Mar 1982

5340-12-186-7453
Metal Runner

121867453
5802206-126000-001: RNCC: 2 | RNVC: 2
535.2885: RNCC: 3 | RNVC: 2
5352885: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-316-2053
Door Handle

123162053
0.32.0208.0: RNCC: 3 | RNVC: 2
235-9505: RNCC: 3 | RNVC: 2
5800163: RNCC: 3 | RNVC: 2
1005-U2: RNCC: 3 | RNVC: 2
125696: RNCC: 5 | RNVC: 2
04079974: RNCC: 5 | RNVC: 2
04079974: RNCC: 5 | RNVC: 2
4-176800: RNCC: 5 | RNVC: 2

30 Dec 1988

5340-12-368-4644
Access Cover

123684644
J53230181-409: RNCC: 3 | RNVC: 2

14 Mar 2006

5340-12-189-4329
Lock-Release Lever

121894329
5801433-082000.02.0: RNCC: 3 | RNVC: 2
5801433-082000-02-0: RNCC: 5 | RNVC: 2
5801433-082000-02-0: RNCC: 5 | RNVC: 9
5801433-082000.02.0: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-12-386-1764
Access Cover

123861764
2500262-064300.011.0: RNCC: 3 | RNVC: 2

15 Aug 2011

5340-12-350-1701
T Bracket

123501701
V6550-06001-143: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-12-173-1008
Dust And Moisture Seal Protective Plug

121731008
021129757: RNCC: 3 | RNVC: 2

20 Mar 1978

5340-12-391-7090
Mounting Plate

123917090
I006072: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-12-348-6725
Expansion Plug

123486725
0630 361 085: RNCC: 3 | RNVC: 2
0630361085: RNCC: 5 | RNVC: 9

3 Aug 1999

5340-12-094-9262
Platte

120949262
A4FLAT: RNCC: 3 | RNVC: 2
A4FLATKADMIERT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-381-3412
Spring Tension Clip

123813412
02135: RNCC: 3 | RNVC: 2

3 Feb 2010

5340-12-326-2604
Access Cover

123262604
100013075: RNCC: 3 | RNVC: 2

23 Aug 1991

5340-12-151-1401
Retaining Strap

121511401
121R04741: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-315-2886
Retaining Strap

123152886
13 911: RNCC: 3 | RNVC: 2
0004760436: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-305-6268
Mending Plate

123056268
136L54023: RNCC: 3 | RNVC: 2
136L54023E1: RNCC: 5 | RNVC: 2
136L54023E1: RNCC: 5 | RNVC: 2

28 Nov 1985

5340-12-355-6253
Access Cover

123556253
17.108.3209.02: RNCC: 2 | RNVC: 2
17.108.3209.02: RNCC: 3 | RNVC: 2

29 Nov 2001

5340-12-386-3937
Mounting Bracket

123863937
070785: RNCC: 3 | RNVC: 2

30 Aug 2011

5340-12-366-1640
Manual Control Handle

123661640
0009192360: RNCC: 3 | RNVC: 2

16 Mar 2005

5340-12-382-2536
Access Cover

123822536
S433M1151211: RNCC: 3 | RNVC: 2

27 May 2010

5340-12-344-3480
Mending Plate

123443480
81429400217: RNCC: 3 | RNVC: 2
81.42940.0217: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-318-9942
Detent Plunger

123189942
130286: RNCC: 3 | RNVC: 2
130286: RNCC: 5 | RNVC: 2
130286: RNCC: 5 | RNVC: 9

30 Aug 1989

5340-12-331-4740
Resilient Mount

123314740
6706820123: RNCC: 3 | RNVC: 9

7 May 1993

5340-12-344-5891
Expansion Plug

123445891
52.3098.003.01: RNCC: 3 | RNVC: 2
52.3098.003.01: RNCC: 5 | RNVC: 9

12 Nov 1997

5340-12-334-7824
Mounting Bracket

123347824
52.0099.030.03: RNCC: 2 | RNVC: 2
52.0099.030.03: RNCC: 3 | RNVC: 2

21 Jun 1994

5340-12-311-8438
Mending Plate

123118438
2300074-5890.01: RNCC: 2 | RNVC: 2
2300074-5890.01: RNCC: 3 | RNVC: 2
2300074-5890.01: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-126-6734
Karabiner- Haken

5340-12-199-4037
Verbindungs Platte

5340-12-127-1797
Druck- Manschette

5340-12-123-3834
Klemme

5340-12-334-4819
Resilient Mount

123344819
S-19413: RNCC: 3 | RNVC: 2

16 May 1994

5340-12-384-3668
Spacing Threaded Standoff

123843668
121Q172000.001.0: RNCC: 2 | RNVC: 2
121Q172000.001.0: RNCC: 3 | RNVC: 2

17 Feb 2011

5340-12-300-8557
Angle Bracket

123008557
1423-850.14(4): RNCC: 3 | RNVC: 2

5 Sep 1984

5340-12-338-4430
Clamping Catch

123384430
5801984-981140.000.0: RNCC: 2 | RNVC: 2
5801984-981140.000.0: RNCC: 3 | RNVC: 2
5801984-981140.000.0: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-12-305-1138
Angle Bracket

123051138
4900059-982114.001.0: RNCC: 3 | RNVC: 2

27 Sep 1985

5340-12-319-5032
Mounting Bracket

123195032
4900059-751910.008.0: RNCC: 3 | RNVC: 2
1503754: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-358-6829
Angle Bracket

123586829
2481-390103.000.0: RNCC: 2 | RNVC: 2
2481-390103.000.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-328-4140
Caster Frame

123284140
227634-3: RNCC: 3 | RNVC: 2
2900.7131: RNCC: 5 | RNVC: 9

15 May 1992

5340-12-701-7841
Mounting Plate

127017841
5.12.7802.1010.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-380-4833
Webbing Strap

123804833
P20547NM: RNCC: 3 | RNVC: 2

3 Nov 2009

5340-12-317-2157
Lock-Release Lever

123172157
0965.05-1015: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-12-317-2976
Loop Clamp

123172976
3219950935: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-360-9340
Mounting Bracket

123609340
12856302: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-151-9493

5340-12-326-8337
Dust And Moisture Seal Protective Cap

123268337
P-896435-037: RNCC: 3 | RNVC: 2
P896435-037: RNCC: 5 | RNVC: 2

31 Oct 1991

5340-12-177-9537
Angle Bracket

121779537
105-62591.02: RNCC: 3 | RNVC: 2
105-62591-02: RNCC: 5 | RNVC: 2

9 Mar 1979

5340-12-320-9944
Retaining Strap

123209944
0116 8142: RNCC: 3 | RNVC: 2
H3202-B8-FE/ZN12CC: RNCC: 5 | RNVC: 2
1X6H3201: RNCC: 5 | RNVC: 9
116-8142: RNCC: 5 | RNVC: 9

14 Mar 1990

5340-12-319-1581
Friction Catch Stud

123191581
2654-332640.02: RNCC: 2 | RNVC: 2
2654-332640.02: RNCC: 3 | RNVC: 2
679-02050400.02: RNCC: 5 | RNVC: 9
2654-332 640.02: RNCC: 5 | RNVC: 9
679-02050400.02: RNCC: 5 | RNVC: 9

12 Sep 1989

5340-12-179-2711
Webbing Strap

121792711
183871469: RNCC: 3 | RNVC: 2
983 107-467: RNCC: 5 | RNVC: 2
183871469: RNCC: 5 | RNVC: 2
183871469: RNCC: 5 | RNVC: 9
183871469: RNCC: 5 | RNVC: 9

20 Jun 1979

5340-12-387-4859
Dust And Moisture Seal Protective Plug

123874859
9418810162: RNCC: 3 | RNVC: 2

29 Dec 2011

5340-12-177-2122
Spring Tension Clip

121772122
3815040031: RNCC: 3 | RNVC: 2

19 Jan 1979

5340-12-171-5253
Access Cover

121715253
141312504: RNCC: 3 | RNVC: 2
D141312504: RNCC: 5 | RNVC: 2

20 Oct 1977

5340-12-390-6337
Loop Clamp

123906337
304642: RNCC: 3 | RNVC: 2
5346-01-00-10/29: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-12-348-2646
Handle Grip

123482646
47249-03: RNCC: 3 | RNVC: 2

19 May 1999

5340-12-196-8550
Dust And Moisture Seal Protective Cap

121968550
025-8636-004: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-12-356-6222
Mending Plate

123566222
2125-125120.17B: RNCC: 2 | RNVC: 2
2125-125120.17B: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-198-0454
Bow Handle

121980454
VG95149A60X18AL-LQ-RAL7032: RNCC: 2 | RNVC: 2
C42080-A6-C74: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-319-5655
Electrical-Mechanical Equipment Post

123195655
5802298-306000.02: RNCC: 2 | RNVC: 2
5802298-306000.02: RNCC: 3 | RNVC: 2

13 Oct 1989

5340-12-302-8322
Extension Drawer Slide

123028322
4900123-1940.02: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-317-3188
Mounting Bracket

123173188
4900064-4111.033: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-360-8921
Handle Grip

123608921
P70162403000: RNCC: 2 | RNVC: 2
P70162403000: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-027-9104

5340-12-313-5409
Helical Compression Spring Seat

123135409
056115181B: RNCC: 3 | RNVC: 2

14 Apr 1988

5340-12-341-1764
Access Door

123411764
052856: RNCC: 3 | RNVC: 2

6 Aug 1996

5340-12-375-7702
Mounting Bracket

123757702
4004423: RNCC: 3 | RNVC: 2
4004423: RNCC: 5 | RNVC: 2

3 Jul 2008

5340-12-349-4947
Retaining Strap

123494947
A11A272450101A1: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-12-388-8825
Dust And Moisture Seal Protective Cover

123888825
5840140215: RNCC: 3 | RNVC: 2

3 May 2012

5340-12-026-1885

5340-12-024-8529

5340-12-187-6663
Retaining Strap

121876663
6.226.0.977.008.4: RNCC: 3 | RNVC: 2
6-226-0-977-008-4: RNCC: 5 | RNVC: 9
6.226.0.977.008.4: RNCC: 5 | RNVC: 9

24 Apr 1981

5340-12-174-7143
Angle Bracket

121747143
65-7058-750-04: RNCC: 3 | RNVC: 2
H38-1051-50: RNCC: 5 | RNVC: 2

25 Jul 1978

5340-12-198-4261
Plain Solid Disk

121984261
4464 302 059: RNCC: 3 | RNVC: 2
7002676: RNCC: 5 | RNVC: 2
7002676: RNCC: 5 | RNVC: 2
1220-563: RNCC: 5 | RNVC: 2
4167572: RNCC: 5 | RNVC: 2
4464302059: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-365-6293
Manual Control Lever

123656293
211111/002: RNCC: 3 | RNVC: 2

19 Jan 2005

5340-12-355-3393
Access Cover

123553393
22-320-JK-048: RNCC: 3 | RNVC: 2
1603295-9600: RNCC: 5 | RNVC: 2

6 Nov 2001

5340-12-187-5681
Electrical-Mechanical Equipment Post

121875681
110-030.01-010: RNCC: 3 | RNVC: 2
110E3001-10: RNCC: 5 | RNVC: 9

15 Apr 1981

5340-12-136-4798
Retaining Strap

121364798
SU02-201: RNCC: 3 | RNVC: 2
SU02-201: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-321-8463
Metal Runner

123218463
C117-A44-C55: RNCC: 2 | RNVC: 2
C117-A44-C55: RNCC: 3 | RNVC: 2

3 Jul 1990

5340-12-358-9627
Mounting Plate

123589627
2300373-188620.000: RNCC: 2 | RNVC: 2
2300373-188620.000: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-179-3805
Angle Bracket

121793805
5801113-111119-002: RNCC: 3 | RNVC: 2
5801113-111119.002: RNCC: 5 | RNVC: 2

27 Jun 1979

5340-12-339-8809
Lock-Release Lever

123398809
2654-331553.00: RNCC: 2 | RNVC: 2
2654-331553.00: RNCC: 3 | RNVC: 2
K6101-1500.00: RNCC: 5 | RNVC: 2
2654-331 553.00: RNCC: 5 | RNVC: 9
2654-331 553.00: RNCC: 5 | RNVC: 9
K6101-1500.00: RNCC: 5 | RNVC: 9
2654-331 553.00: RNCC: 5 | RNVC: 9

29 Jan 1996

5340-12-325-3650
Loop Clamp

123253650
DIN3016-D1-18X15-W1-2 MVQ1-70: RNCC: 2 | RNVC: 2
DIN3016-D1-18X15-W1-2 MVQ1-70: RNCC: 3 | RNVC: 2
RSGU1.8146.18/15: RNCC: 3 | RNVC: 2
0117 5586: RNCC: 5 | RNVC: 2
01175586ES8932-23: RNCC: 5 | RNVC: 2
H3223-C18X15-ST/DEUTZ MVQ1-70: RNCC: 5 | RNVC: 2
4784349: RNCC: 5 | RNVC: 2
9418146018: RNCC: 5 | RNVC: 2

29 May 1991

Load More Results