What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 33 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 33 of 178

5340-12-331-2370
Access Cover

123312370
VG95211-ML-123312370: RNCC: 2 | RNVC: 2
2904670598: RNCC: 3 | RNVC: 2

6 Apr 1993

5340-12-332-4433
Double Angle Bracket

123324433
480-7397-08-00-01: RNCC: 3 | RNVC: 2
480/7397-08-00-01: RNCC: 5 | RNVC: 2

11 Aug 1993

5340-12-321-8469
Mending Plate

123218469
C104-A24-C56: RNCC: 2 | RNVC: 2
C104-A24-C56: RNCC: 3 | RNVC: 2

3 Jul 1990

5340-12-173-1389
Mending Plate

121731389
23290-204069: RNCC: 2 | RNVC: 2
23290-204069: RNCC: 3 | RNVC: 2
23290-204069: RNCC: 5 | RNVC: 9
23290-204069: RNCC: 5 | RNVC: 9

22 Mar 1978

5340-12-196-8136
Mending Plate

121968136
009-030.115-008: RNCC: 3 | RNVC: 2
009-030-115-008: RNCC: 5 | RNVC: 2
12790-112000-008: RNCC: 5 | RNVC: 9
12790-112000.008: RNCC: 5 | RNVC: 9

18 Aug 1983

5340-12-302-1777
Swivel Caster

123021777
20-7390-120: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-181-6055
Rod End Clevis

121816055
8457306: RNCC: 3 | RNVC: 2
1412-174: RNCC: 5 | RNVC: 2
1412174: RNCC: 5 | RNVC: 2

10 Dec 1979

5340-12-190-8608
Lock-Release Lever

121908608
C22136-A1000-C73: RNCC: 3 | RNVC: 2
C22136A1000C73: RNCC: 5 | RNVC: 9

27 Feb 1985

5340-12-701-4567
Mounting Bracket

127014567
VG95211-ML-127014567: RNCC: 2 | RNVC: 2
5.12.5314.1030.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-383-5832
Bumper

123835832
SMJ 234-001-101-118: RNCC: 3 | RNVC: 2
SMJ234-001-101-118: RNCC: 5 | RNVC: 2

10 Nov 2010

5340-12-358-3305
Mounting Bracket

123583305
2500262-192400.001.0: RNCC: 2 | RNVC: 2
2500262-192400.001.0: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-12-315-8578
Angle Bracket

123158578
151-280000-904-0: RNCC: 3 | RNVC: 2
3787233EE3132-99: RNCC: 5 | RNVC: 2

2 Dec 1988

5340-12-390-4113
Mounting Bracket

123904113
2300559-067320.002.0: RNCC: 2 | RNVC: 2
2300559-067320.002.0: RNCC: 3 | RNVC: 2

9 Nov 2012

5340-12-340-1392
Double Angle Bracket

123401392
87-401.70-06.01-04: RNCC: 3 | RNVC: 2
87-401.70-06.01-04/4: RNCC: 5 | RNVC: 2

5 Mar 1996

5340-12-313-3504
Swivel Caster

123133504
L-VPP100G-FA-RA: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-12-701-1742
Mounting Bracket

127011742
VG95211-ML-127011742: RNCC: 2 | RNVC: 2
5.12.0246.0031.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-320-0756
Double Angle Bracket

123200756
6123901: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-12-131-5597

5340-12-337-8968
Catch Strike

123378968
100067273: RNCC: 3 | RNVC: 2
10 0067 273: RNCC: 5 | RNVC: 2

2 May 1995

5340-12-193-8629
Bail Handle

121938629
DIN3136-100X80SW: RNCC: 2 | RNVC: 2
DIN3136-100X80-SW: RNCC: 3 | RNVC: 2
A100X80DIN3136SCHWARZ LACKIERT: RNCC: 5 | RNVC: 2
DIN3136-100X80 SL: RNCC: 5 | RNVC: 2
DIN3136-100X80SL: RNCC: 5 | RNVC: 2
A100X80DIN3136SCHWARSLAC: RNCC: 5 | RNVC: 9

7 Sep 1982

5340-12-166-6245
Access Cover

121666245
1250 303 037: RNCC: 3 | RNVC: 2
1274281EY8751-53: RNCC: 5 | RNVC: 2
8751-53-80-37: RNCC: 5 | RNVC: 2
81.32106-0029: RNCC: 5 | RNVC: 2
81321060029: RNCC: 5 | RNVC: 2
0127 4281: RNCC: 5 | RNVC: 2
1274281: RNCC: 5 | RNVC: 9
1250303037: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-303-4991
Loop Clamp

123034991
5C: RNCC: 3 | RNVC: 2
211-15050: RNCC: 5 | RNVC: 2
25704-350000.00.0T175: RNCC: 5 | RNVC: 2
25704-350000.00.0T175: RNCC: 5 | RNVC: 2
25704-350000T175: RNCC: 5 | RNVC: 2
202002901: RNCC: 5 | RNVC: 9
25704-350000.00.0T175: RNCC: 5 | RNVC: 9
25704-350000T175: RNCC: 5 | RNVC: 9

27 Mar 1985

5340-12-177-0670
Platte

121770670
5800822-1201-009: RNCC: 3 | RNVC: 2
5800822-1201.009: RNCC: 5 | RNVC: 2

12 Jan 1979

5340-12-180-3411
Dust And Moisture Seal Protective Cap

121803411
3818110318: RNCC: 3 | RNVC: 2

5 Sep 1979

5340-12-309-6729
Nut And Bolt Locking Plate

123096729
5119940130: RNCC: 3 | RNVC: 2
5119940130: RNCC: 5 | RNVC: 2
5119940130: RNCC: 5 | RNVC: 2

16 Feb 1987

5340-12-305-8103
Extension Drawer Slide

123058103
BD9101E615: RNCC: 3 | RNVC: 2
BD9101E615: RNCC: 5 | RNVC: 9

17 Dec 1985

5340-12-132-1553
Turnbuckle Body

121321553
DIN1479-SPM8-ST: RNCC: 2 | RNVC: 2
SP-DIN1479-M8-ROH: RNCC: 3 | RNVC: 2
5500008S: RNCC: 5 | RNVC: 2
DIN1479-SPM8: RNCC: 5 | RNVC: 2
M8DIN1479: RNCC: 5 | RNVC: 2
SPM8DIN1479: RNCC: 5 | RNVC: 2
001479008003: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-177-9538
Angle Bracket

121779538
1121-62715.06: RNCC: 3 | RNVC: 2
1121-62715-06: RNCC: 5 | RNVC: 2

9 Mar 1979

5340-12-172-0634
Turnbuckle Body

121720634
1000078-001200.01: RNCC: 2 | RNVC: 2
1000078-001200-01: RNCC: 5 | RNVC: 2
1000078-001200-01: RNCC: 5 | RNVC: 9
1000078-001200-01: RNCC: 5 | RNVC: 9

19 Dec 1977

5340-12-171-7604
Mending Plate

121717604
66-3506-610-01A001: RNCC: 3 | RNVC: 2

11 Nov 1977

5340-12-132-1464
Turnbuckle Body

121321464
DIN1479-SPM16-ST: RNCC: 2 | RNVC: 2
SP-DIN1479-M16-ROH: RNCC: 3 | RNVC: 2
M16DIN1479: RNCC: 5 | RNVC: 2
SPM16DIN1479: RNCC: 5 | RNVC: 2
0022: RNCC: 5 | RNVC: 2
5500016S: RNCC: 5 | RNVC: 2
6-252-0051: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-303-1367
Resilient Mount

123031367
H95-216-89-108-8 FF: RNCC: 3 | RNVC: 2
351-002-123400-000-0: RNCC: 5 | RNVC: 2
351-002-123400-000-0: RNCC: 5 | RNVC: 2
H95-216-89-108-8(C2-82 GRAD): RNCC: 5 | RNVC: 9
351-002-123400-000-0: RNCC: 5 | RNVC: 9

27 Feb 1985

5340-12-321-8965
Loop Clamp

123218965
DIN3016-1-D1-6X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-6X15-W5: RNCC: 3 | RNVC: 2
RSGU1.6/15-W5: RNCC: 3 | RNVC: 2
DIN3016-D1-6X15-W5: RNCC: 5 | RNVC: 9

6 Jul 1990

5340-12-702-4994
Mounting Bracket

127024994
VG95211-ML-127024994: RNCC: 2 | RNVC: 2
5.51.5811.0520.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-358-6966
Dust And Moisture Seal Protective Cover

123586966
2481-100108.000.0: RNCC: 2 | RNVC: 2
2481-100108.000.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-377-8591
Loop Clamp

123778591
DIN3016-1-A1-27X15-W5: RNCC: 2 | RNVC: 2

17 Feb 2009

5340-12-179-1737
Mounting Bracket

121791737
2300061-291240-002: RNCC: 2 | RNVC: 2
2300061-291240.002: RNCC: 5 | RNVC: 9

15 Jun 1979

5340-12-319-5294
Mounting Bracket

123195294
2653-073100.07: RNCC: 2 | RNVC: 2
2653-073100.07: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-12-382-2822
Webbing Strap

123822822
2500171-221200.00: RNCC: 2 | RNVC: 2
2500171-221200.00: RNCC: 3 | RNVC: 2
2500171-221200.00: RNCC: 5 | RNVC: 9

1 Jun 2010

5340-12-358-0119
Spacing Threaded Standoff

123580119
WN180-AM5X20-ST: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-331-5369
Support Hook

123315369
160-73062-03: RNCC: 3 | RNVC: 2
15160-73062-03: RNCC: 5 | RNVC: 2
160-73062-03: RNCC: 5 | RNVC: 9

17 May 1993

5340-12-309-9117
Lock-Release Lever

123099117
320-992110.13: RNCC: 3 | RNVC: 2
320-992110-13: RNCC: 5 | RNVC: 2

18 Mar 1987

5340-12-375-0332
Roller Holder

123750332
23303-150141.00: RNCC: 2 | RNVC: 2
619-65.10.130-02C: RNCC: 3 | RNVC: 2

15 Apr 2008

5340-12-315-1494
Protection Bellows

123151494
B447 407 285: RNCC: 3 | RNVC: 2

22 Sep 1988

5340-12-361-1339
Mounting Bracket

123611339
160.08.0027: RNCC: 3 | RNVC: 2

27 Aug 2003

5340-12-325-2542
Double Angle Bracket

123252542
3954921741: RNCC: 3 | RNVC: 2

22 May 1991

5340-12-360-6983
Clamping Catch

123606983
P70162101001: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-388-8274
Dust And Moisture Seal Protective Plug

123888274
2000A1645K01: RNCC: 3 | RNVC: 2

26 Apr 2012

5340-12-386-5795
Pad Eye

123865795
T521M0501104: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-131-5589

5340-12-387-4247
Electronic Equipment Hardware Kit

123874247
5005313082: RNCC: 3 | RNVC: 2

14 Dec 2011

5340-12-300-3499
Escutcheon Plate

123003499
3096750097: RNCC: 3 | RNVC: 2

26 Jul 1984

5340-12-319-0329
Butt Hinge Leaf

123190329
2002.10.10.000: RNCC: 3 | RNVC: 9

31 Aug 1989

5340-12-325-0554
Metal Runner

123250554
78008 21124: RNCC: 2 | RNVC: 2
7800821124: RNCC: 3 | RNVC: 2
78008 21124: RNCC: 5 | RNVC: 9

26 Apr 1991

5340-12-040-2057

5340-12-314-1395
Nonmetallic Bumper

123141395
3512 715 03782: RNCC: 3 | RNVC: 2
35127150378: RNCC: 5 | RNVC: 2

11 Jun 1988

5340-12-314-2266
Handle Grip

123142266
3B58097: RNCC: 3 | RNVC: 2
000 997 30 77: RNCC: 5 | RNVC: 2
0009973077: RNCC: 5 | RNVC: 2

17 Jun 1988

5340-12-301-3283
Mending Plate

123013283
2300106-260330.04: RNCC: 2 | RNVC: 2
2300106-260330.04: RNCC: 3 | RNVC: 2
2300106-260330.04: RNCC: 5 | RNVC: 9
2300106-260330.04: RNCC: 5 | RNVC: 9

6 Oct 1984

5340-12-365-5294
Access Cover

123655294
225400.0117.000: RNCC: 3 | RNVC: 2
3620331: RNCC: 5 | RNVC: 2

12 Jan 2005

5340-12-314-2972
Mounting Bracket

123142972
4231440040: RNCC: 3 | RNVC: 2
423 144 00 40: RNCC: 5 | RNVC: 2

23 Jun 1988

5340-12-340-0089
Lock-Release Lever

123400089
6.4240-104: RNCC: 3 | RNVC: 2
213421460: RNCC: 5 | RNVC: 2

13 Feb 1996

5340-12-703-1092
Pawl Fastener

127031092
VG95211-ML-127031092: RNCC: 2 | RNVC: 2
155N1013-6: RNCC: 3 | RNVC: 2
0500802761009: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-374-8912
Butt Hinge Leaf

123748912
SK971-182200.002.0: RNCC: 3 | RNVC: 2
1728153: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-12-701-2665
Mounting Plate

127012665
VG95211-ML-127012665: RNCC: 2 | RNVC: 2
5.12.4805.0005.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-390-3877
Loop Clamp

123903877
DIN3016-1-D1-6X12-W5-NBR: RNCC: 2 | RNVC: 2

7 Nov 2012

5340-12-349-6078
Strap Hinge Leaf

123496078
T524M1513225: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-320-7372
Shimmy Damper

123207372
9000 1264: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-12-370-9164
Nonmetallic Bumper

123709164
129711: RNCC: 3 | RNVC: 2

16 Jan 2007

5340-12-360-0401
Angle Bracket

123600401
9265143000: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-381-9257
Spring Loaded Cylinder Fastener

123819257
000605-215100.01: RNCC: 2 | RNVC: 2
43666: RNCC: 3 | RNVC: 2

19 Apr 2010

5340-12-362-9781
Manual Control Lever

123629781
2300042-992612.001: RNCC: 2 | RNVC: 2
2300042-992612.001: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-12-359-7565
Dust And Moisture Seal Protective Plug

123597565
GPN700-M12-RAL6014: RNCC: 3 | RNVC: 2

7 Mar 2003

5340-12-358-9752
Dust And Moisture Seal Protective Cap

123589752
191513269: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-365-3232
Mounting Bracket

123653232
S991M5059210: RNCC: 2 | RNVC: 2
S991M5059210: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-361-6440
Mounting Bracket

123616440
230.1013: RNCC: 3 | RNVC: 2

29 Oct 2003

5340-12-366-4833
Catch Strike

123664833
336 400 190: RNCC: 3 | RNVC: 2
2167 2129-325: RNCC: 5 | RNVC: 2

28 Apr 2005

5340-12-368-1659
Manual Control Lever

123681659
160-41308: RNCC: 3 | RNVC: 2

23 Dec 2005

5340-12-358-7888
Mounting Bracket

123587888
461 310 1609: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-128-0863

5340-12-169-6722
Butt Hinge

121696722
81972010139: RNCC: 3 | RNVC: 9
81.97201-0155: RNCC: 5 | RNVC: 2
81972010155: RNCC: 5 | RNVC: 2
9362: RNCC: 5 | RNVC: 2
81.97201-0139: RNCC: 5 | RNVC: 2

3 Jun 1977

5340-12-368-1318
Fuehrungs- Schiene

123681318
5161-334000A02B: RNCC: 2 | RNVC: 2
5161-334000A02B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-186-6539
Retaining Clip

121866539
C22165-A1000-C858: RNCC: 3 | RNVC: 2
C22165A1000C858: RNCC: 5 | RNVC: 9

23 Jan 1981

5340-12-701-7685
Loop Clamp

127017685
VG95211-ML-127017685: RNCC: 2 | RNVC: 2
5.12.7702.8001.11: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-163-9469
Turnbuckle

121639469
23290-041190.000: RNCC: 2 | RNVC: 2
23290-041190.000: RNCC: 3 | RNVC: 2
23290-041190.000: RNCC: 3 | RNVC: 2
23290-041190: RNCC: 5 | RNVC: 9
23290-041190: RNCC: 5 | RNVC: 9
23290-041190: RNCC: 5 | RNVC: 9
23290-041190: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-324-9975
Webbing Strap

123249975
79017/026-0700-0200: RNCC: 3 | RNVC: 2
79017/026-700-200: RNCC: 3 | RNVC: 2
79017/026-0700-0200: RNCC: 5 | RNVC: 9

22 Apr 1991

5340-12-337-9517
Mounting Bracket

123379517
3674-0101-0001: RNCC: 3 | RNVC: 2
238597: RNCC: 5 | RNVC: 2
E3674-0101-0001: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-179-2327
Platte

121792327
5800828-1342-015: RNCC: 3 | RNVC: 2
5800828-1342.015: RNCC: 5 | RNVC: 2

18 Jun 1979

5340-12-327-1328
Angle Bracket

123271328
M514284: RNCC: 3 | RNVC: 9
M514284: RNCC: 5 | RNVC: 2

5 Dec 1991

5340-12-326-0608
Loop Clamp

123260608
0289 6009: RNCC: 3 | RNVC: 2
02896009KZ0608-79: RNCC: 5 | RNVC: 2

5 Aug 1991

5340-12-308-4786
Pipe Bracket

123084786
160-714608: RNCC: 3 | RNVC: 2
160-714608: RNCC: 5 | RNVC: 9

15 Oct 1986

5340-12-327-8091
Metal Grille

123278091
01TC60123G01: RNCC: 3 | RNVC: 2
01TC60118G01: RNCC: 5 | RNVC: 2

7 Mar 1992

5340-12-319-6572
Rod End Clevis

123196572
M465245: RNCC: 3 | RNVC: 9
M465245: RNCC: 5 | RNVC: 2

23 Oct 1989

5340-12-316-1040
Retaining Strap

123161040
6213230340: RNCC: 3 | RNVC: 2
621 323 03 40: RNCC: 5 | RNVC: 2

22 Dec 1988

5340-12-348-2703
Turnbuckle

123482703
5220.220.040.000: RNCC: 3 | RNVC: 2

20 May 1999

5340-12-300-1362
Retaining Strap

123001362
2500135-067110.001.0: RNCC: 2 | RNVC: 2
2500135-067110.001.0: RNCC: 3 | RNVC: 2
2500135-067110.001.0: RNCC: 5 | RNVC: 9

6 Jul 1984

5340-12-317-4634
Mounting Bracket

123174634
P-145552-001: RNCC: 3 | RNVC: 2
P145552-001: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-12-314-2527
Loop Clamp

123142527
DIN3015-S-A-4-E-38-PP-W1: RNCC: 2 | RNVC: 2
HRES4S38PP STMBL: RNCC: 3 | RNVC: 2
RCEG1-438: RNCC: 3 | RNVC: 2
SPAL6038PPR-DPAL-AS: RNCC: 3 | RNVC: 2
RCEG1-438: RNCC: 5 | RNVC: 2
DIN3015-SA4E-38PP-W1: RNCC: 5 | RNVC: 2
HRE4SS38PP: RNCC: 5 | RNVC: 2
HRES4S38PP ST BL: RNCC: 5 | RNVC: 2
SPAL6038PPR-DPAL-AS: RNCC: 5 | RNVC: 2

21 Jun 1988

5340-12-356-0686
Mounting Bracket

123560686
P-876414-001: RNCC: 3 | RNVC: 2
P876414-001: RNCC: 5 | RNVC: 2

18 Jan 2002

5340-12-338-8853
Mounting Bracket

123388853
2500075-196010.000.0: RNCC: 2 | RNVC: 2
2500075-196010.000.0: RNCC: 3 | RNVC: 2
2500075-196010-000-0: RNCC: 5 | RNVC: 9

5 Sep 1995

5340-12-342-3808
Access Door

123423808
20225-121: RNCC: 3 | RNVC: 2
1ACAB-208264-0-0: RNCC: 5 | RNVC: 2

30 Jan 1997

5340-12-170-8870
Resilient Mount

121708870
DIN95363-A20X15-NR55ST: RNCC: 2 | RNVC: 2
781050MITTEL: RNCC: 5 | RNVC: 2
AE3.37-55SH: RNCC: 5 | RNVC: 2
C 3695 507 1: RNCC: 5 | RNVC: 2
81962100136: RNCC: 5 | RNVC: 2
81.96210-0136: RNCC: 5 | RNVC: 2
C 3695 507 1: RNCC: 5 | RNVC: 2
500021-M6X20.NR55.ST: RNCC: 5 | RNVC: 2
57810500015: RNCC: 5 | RNVC: 2
VG95363-A20X15-NR55ST: RNCC: 5 | RNVC: 9

19 Aug 1977

5340-12-349-9089
Mounting Plate

123499089
58R137-1348-10: RNCC: 2 | RNVC: 2
58R137-1348-10: RNCC: 3 | RNVC: 2
20313864: RNCC: 5 | RNVC: 2

24 Jan 2000

5340-12-394-0079
Access Cover

123940079
310531: RNCC: 3 | RNVC: 2
5183-02-15-02/35: RNCC: 5 | RNVC: 2

29 Oct 2013

5340-12-168-5676
Mending Plate

121685676
1000025-290000-03: RNCC: 3 | RNVC: 2
1000025-290000.03: RNCC: 3 | RNVC: 2
1000025-290000-03: RNCC: 5 | RNVC: 9
1000025-290000.03: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-378-4224
Access Cover

123784224
1650-512100-02: RNCC: 3 | RNVC: 2
1650-512100.02: RNCC: 5 | RNVC: 2

3 Apr 2009

5340-12-328-9511
Resilient Mount

123289511
DIN95363-B30X20-NR40ST: RNCC: 2 | RNVC: 2
510025-M8X20.NR40.ST: RNCC: 5 | RNVC: 2
VG95363B30X20NR40STZN: RNCC: 5 | RNVC: 9
VG95363-B30X20-NR40ST: RNCC: 5 | RNVC: 9

3 Jul 1992

5340-12-321-9400
Catch Strike

123219400
58L7-1AA: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-167-3518
Plain Solid Disk

121673518
40.452.03: RNCC: 3 | RNVC: 2
40-452-03: RNCC: 5 | RNVC: 2

16 Dec 1976

5340-12-387-5924
Retaining Bail

123875924
5803745-200000.01: RNCC: 2 | RNVC: 2
7802902101: RNCC: 3 | RNVC: 2

12 Jan 2012

5340-12-364-2059
Double Angle Bracket

123642059
4256202214: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-379-4052
Manual Control Lever

123794052
1546265: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-365-3224
Mounting Bracket

123653224
AFG0538464: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-348-3147
Nonmetallic Bumper

123483147
6250.112.130.004: RNCC: 3 | RNVC: 2

28 May 1999

5340-12-197-8063
Angle Bracket

121978063
3348101: RNCC: 3 | RNVC: 2

23 Nov 1983

5340-12-388-5621
Bow Handle

123885621
BZA42316: RNCC: 3 | RNVC: 2

30 Mar 2012

5340-12-387-6582
Pad Eye

123876582
T521M0501102: RNCC: 3 | RNVC: 2

20 Jan 2012

5340-12-300-1900
Loop Clamp

123001900
1869950101: RNCC: 3 | RNVC: 2

12 Jul 1984

5340-12-314-6720
Angle Bracket

123146720
512214-3505.000: RNCC: 3 | RNVC: 2
512214-3505: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-357-1647
Dust And Moisture Seal Protective Cap

123571647
250/108: RNCC: 3 | RNVC: 2
GPN250/108: RNCC: 5 | RNVC: 2

14 May 2002

5340-12-352-8584
Angle Bracket

123528584
520-120800.12.0: RNCC: 2 | RNVC: 2
520-120800.12.0: RNCC: 3 | RNVC: 2

21 Dec 2000

5340-12-301-5195
Rod End Clevis

123015195
LN29606-B6: RNCC: 2 | RNVC: 2
B6LN29606: RNCC: 5 | RNVC: 2
LN29606B6: RNCC: 5 | RNVC: 2

20 Oct 1984

5340-12-311-0557
Retaining Strap

123110557
43716268-601: RNCC: 2 | RNVC: 2
43716268-601: RNCC: 3 | RNVC: 2

22 Jul 1987

5340-12-358-9693
Angle Bracket

123589693
6564660040: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-319-9605
Dust And Moisture Seal Protective Plug

123199605
620U26B: RNCC: 3 | RNVC: 2
620U26B: RNCC: 5 | RNVC: 2
GPN620,U26B: RNCC: 5 | RNVC: 9

21 Nov 1989

5340-12-353-3978
Block Clamp

123533978
JN0093CCC42: RNCC: 3 | RNVC: 2

20 Mar 2001

5340-12-340-6931
Mounting Bracket

123406931
8452310550: RNCC: 3 | RNVC: 2
84523 10550: RNCC: 5 | RNVC: 9

24 May 1996

5340-12-357-2682
Dust And Moisture Seal Protective Plug

123572682
63 6591 310 056: RNCC: 3 | RNVC: 2
0019887935: RNCC: 5 | RNVC: 2

28 May 2002

5340-12-354-0131
Dust And Moisture Seal Protective Cap

123540131
200Z20X14RAL3000: RNCC: 3 | RNVC: 2
200Z20X14ROUGE: RNCC: 5 | RNVC: 2
GPN200Z20X14ROUGE: RNCC: 5 | RNVC: 2
200Z20X14 ROT: RNCC: 5 | RNVC: 9

28 May 2001

5340-12-354-9066
Mounting Plate

123549066
5400049-621120.00: RNCC: 2 | RNVC: 2
5400049-621120.00: RNCC: 3 | RNVC: 2

4 Sep 2001

5340-12-195-0465
Leaf Spring

121950465
150 412: RNCC: 3 | RNVC: 9
150412: RNCC: 3 | RNVC: 9

6 Jan 1983

5340-12-361-4326
Mounting Plate

123614326
1504304: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-357-1021
Loop Clamp

123571021
EN4114F18NH1: RNCC: 2 | RNVC: 2

7 May 2002

5340-12-346-1719
Double Angle Bracket

123461719
10 0000 702: RNCC: 2 | RNVC: 2
10 0000 702: RNCC: 3 | RNVC: 2
10.0000.702: RNCC: 5 | RNVC: 2

22 Jun 1998

5340-12-311-7673
Mending Plate

123117673
9023805: RNCC: 3 | RNVC: 2
46002100007000: RNCC: 5 | RNVC: 2

15 Oct 1987

5340-12-350-8232
Mounting Bracket

123508232
8712300127: RNCC: 3 | RNVC: 2
871 230 01 27: RNCC: 5 | RNVC: 2

25 May 2000

5340-12-177-1610
Angle Bracket

121771610
3521800440: RNCC: 3 | RNVC: 2

17 Jan 1979

5340-12-328-4369
Dust And Moisture Seal Protective Plug

123284369
1159970286: RNCC: 3 | RNVC: 2

19 May 1992

5340-12-173-7964
Resilient Mount

121737964
183199381A: RNCC: 3 | RNVC: 2
183199381A: RNCC: 5 | RNVC: 2

16 May 1978

5340-12-198-8866
Mending Plate

121988866
8372036240: RNCC: 3 | RNVC: 2

9 Mar 1984

5340-12-171-7398
Cremone Bolt

121717398
2281K5: RNCC: 3 | RNVC: 2

10 Nov 1977

5340-12-306-0136
Angle Bracket

123060136
2610601: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-324-3219
Helical Compression Spring Seat

123243219
1480551012: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-12-359-7675
Mounting Plate

123597675
272.495.040: RNCC: 3 | RNVC: 2

10 Mar 2003

5340-12-330-0191
Loop Clamp

123300191
LN9491BK60: RNCC: 2 | RNVC: 2

22 Oct 1992

5340-12-351-4168
Track Stop

123514168
10063-230200: RNCC: 3 | RNVC: 2
10063-230200: RNCC: 5 | RNVC: 9

25 Jul 2000

5340-12-337-9933
Mending Plate

123379933
4667101: RNCC: 3 | RNVC: 2
EZ46671: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-392-4954
Protection Bellows

123924954
M49172355206: RNCC: 3 | RNVC: 2

13 Jun 2013

5340-12-331-9416
Plug Button

123319416
553 7692: RNCC: 3 | RNVC: 2
5537692: RNCC: 5 | RNVC: 2

7 Jul 1993

5340-12-351-5064
Double Angle Bracket

123515064
4616800214: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-303-6421
Double Angle Bracket

123036421
5802017-707800.00: RNCC: 2 | RNVC: 2
5802017-707800.00: RNCC: 3 | RNVC: 2

17 Apr 1985

5340-12-193-4456
Dust And Moisture Seal Protective Cap

121934456
4062640457: RNCC: 3 | RNVC: 2

21 Jul 1982

5340-12-347-9916
Track Stop

123479916
982 120 44: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-12-185-1167
Dust And Moisture Seal Protective Cap

121851167
SP889: RNCC: 3 | RNVC: 2
0001580785: RNCC: 5 | RNVC: 2

11 Sep 1980

5340-12-357-8279
Butt Hinge

123578279
2300042-255815.007: RNCC: 2 | RNVC: 2
9947835: RNCC: 3 | RNVC: 2
2300042-255815.007: RNCC: 5 | RNVC: 2

30 Jul 2002

5340-12-381-6162
Spring Tension Clip

123816162
252069010202: RNCC: 3 | RNVC: 2

10 Mar 2010

5340-12-322-2697
Loop Clamp

123222697
1248101: RNCC: 3 | RNVC: 2
1248101: RNCC: 5 | RNVC: 2

7 Aug 1990

5340-12-309-4058
Access Cover

123094058
WW 414 729: RNCC: 2 | RNVC: 2
WW 414 729: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-350-4558
Section Block Clamp

123504558
JN0413EJ44: RNCC: 3 | RNVC: 2

3 Apr 2000

5340-12-349-7434
Retaining Strap

123497434
T290M2202256: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-369-1739
Retaining Strap

123691739
9014760136: RNCC: 3 | RNVC: 2
2D0201707B: RNCC: 5 | RNVC: 2

31 May 2006

5340-12-321-7123
Metallic Solid Wheel

123217123
328331: RNCC: 3 | RNVC: 2

18 Jun 1990

5340-12-302-1991
Lock-Release Lever

123021991
27 0318 097: RNCC: 2 | RNVC: 2
9859491: RNCC: 3 | RNVC: 9

8 Dec 1984

5340-12-378-8362
Block Clamp

123788362
98794993: RNCC: 3 | RNVC: 2
98794993: RNCC: 5 | RNVC: 2
CV146165: RNCC: 5 | RNVC: 2

18 May 2009

5340-12-315-8904
Handle Grip

123158904
027019: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-12-320-0536
Webbing Strap

123200536
02588728: RNCC: 3 | RNVC: 2

1 Dec 1989

5340-12-189-0574
Dust And Moisture Seal Protective Plug

121890574
158 395: RNCC: 3 | RNVC: 2
158395: RNCC: 5 | RNVC: 2
158 395: RNCC: 5 | RNVC: 9
158395: RNCC: 5 | RNVC: 9

24 Aug 1981

5340-12-355-4018
Mounting Bracket

123554018
4615405473: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-090-6260

5340-12-044-3087

5340-12-040-1773

5340-12-360-7140
Dust And Moisture Seal Protective Cap

123607140
1H6 955 435A: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-703-3491
Mounting Bracket

127033491
VG95211-ML-127033491: RNCC: 2 | RNVC: 2
S32-6175-47A: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-148-2280
Spring Tension Clip

121482280
25 886-001: RNCC: 3 | RNVC: 2
25886-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-366-0736
Access Cover

123660736
367222-01: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-12-173-4059
Spring Loaded Cylinder Fastener

121734059
TK-E59C-5340-028: RNCC: 2 | RNVC: 2
651124: RNCC: 3 | RNVC: 2
100-020-0002: RNCC: 5 | RNVC: 2
TK-BA35-5340-049: RNCC: 5 | RNVC: 2

13 Apr 1978

5340-12-340-1900
Lock-Release Lever

123401900
463-069109.000: RNCC: 3 | RNVC: 9
9901355: RNCC: 5 | RNVC: 9

13 Mar 1996

5340-12-155-2540
Butt Hinge Leaf

121552540
VG95211-ML-121552540: RNCC: 2 | RNVC: 2
160-25541-30: RNCC: 3 | RNVC: 2
160-25541-30: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-375-1373
Clamping Catch

123751373
VG95136B2-38X28-RAL6031-F9: RNCC: 2 | RNVC: 2

24 Apr 2008

5340-12-144-4328
Resilient Mount

121444328
473: RNCC: 3 | RNVC: 2
SCHEIBENFEDER-741473.NR60.ST: RNCC: 3 | RNVC: 2
741473: RNCC: 3 | RNVC: 2
57414730042: RNCC: 5 | RNVC: 2
741473MITTEL: RNCC: 5 | RNVC: 2
169812901: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-304-1773
Loop Clamp

123041773
WN 414 25-100-ST: RNCC: 3 | RNVC: 2
WN 414 25-100-ST: RNCC: 5 | RNVC: 9
WN41425-100-ST: RNCC: 5 | RNVC: 9

20 Jun 1985

5340-12-161-1886
Spring Tension Clip

121611886
160-74248-06: RNCC: 3 | RNVC: 2
160-74248-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-300-8535
Dust And Moisture Seal Protective Plug

123008535
550/006: RNCC: 3 | RNVC: 2
GPN550/006: RNCC: 5 | RNVC: 2
550006: RNCC: 5 | RNVC: 9
GPN550-006: RNCC: 5 | RNVC: 9
11.02227: RNCC: 5 | RNVC: 9
550000600: RNCC: 5 | RNVC: 9

5 Sep 1984

5340-12-306-5173
Retaining Clip

123065173
1865-131100.05.0: RNCC: 3 | RNVC: 9

6 Mar 1986

5340-12-130-1099
Strap Fastener Loop

121301099
DIN6406-D20-ST-VERZINKT: RNCC: 2 | RNVC: 2
3220052: RNCC: 3 | RNVC: 2
0062-010: RNCC: 5 | RNVC: 2
0062010: RNCC: 5 | RNVC: 2
8442574: RNCC: 5 | RNVC: 2
D20DIN6406STVERZINKT: RNCC: 5 | RNVC: 2
51081: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-010-8482

5340-12-010-8480

5340-12-300-2255
Electrical-Mechanical Equipment Post

123002255
7060601: RNCC: 3 | RNVC: 2

14 Jul 1984

5340-12-388-4475
Section Block Clamp

123884475
5849955968: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-388-4466
Mounting Bracket

123884466
5842032940: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-319-4180
Shimmy Damper

123194180
083704: RNCC: 3 | RNVC: 2

29 Sep 1989

5340-12-319-2313
Helical Compression Spring Seat

123192313
1420328053: RNCC: 3 | RNVC: 2

14 Sep 1989

5340-12-022-8534

5340-12-345-2236
Mending Plate

123452236
81974870679: RNCC: 3 | RNVC: 2
81.97487.0679: RNCC: 5 | RNVC: 2

12 Feb 1998

5340-12-385-2266
Section Block Clamp

123852266
5849953168: RNCC: 3 | RNVC: 2

11 May 2011

5340-12-357-5220
Mounting Plate

123575220
T311M3242102: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-327-3425
Leather Strap

123273425
23302-182118.01: RNCC: 2 | RNVC: 2
0074076: RNCC: 3 | RNVC: 2
8404070: RNCC: 5 | RNVC: 2

14 Jan 1992

5340-12-172-7907
Door Button

121727907
50400: RNCC: 3 | RNVC: 2
24939-50400: RNCC: 5 | RNVC: 2

20 Feb 1978

5340-12-338-0269
Casement Fastener

123380269
6600155-132200.00: RNCC: 2 | RNVC: 2
6600155-132200.00: RNCC: 3 | RNVC: 2
6600155-132200.00: RNCC: 5 | RNVC: 2
6600155-132200.00: RNCC: 5 | RNVC: 9
9826138: RNCC: 5 | RNVC: 9

12 May 1995

5340-12-326-4243
Metallic Bumper

123264243
5802161-920400.05: RNCC: 2 | RNVC: 2
7800462405: RNCC: 3 | RNVC: 2
78004 62405: RNCC: 5 | RNVC: 9

13 Sep 1991

5340-12-171-1566
Mending Plate

121711566
306-095-82-009: RNCC: 3 | RNVC: 2
0038593: RNCC: 5 | RNVC: 2
038593: RNCC: 5 | RNVC: 2
81.67195-0005: RNCC: 5 | RNVC: 2
81671950005: RNCC: 5 | RNVC: 2
23251-200648.009.0: RNCC: 5 | RNVC: 9

12 Sep 1977

5340-12-338-2930
Loop Clamp

123382930
151 8778 167: RNCC: 3 | RNVC: 2
SP8778.167/20SZ: RNCC: 5 | RNVC: 2
SP8778.167/20SZ-W1: RNCC: 5 | RNVC: 2
40037200: RNCC: 5 | RNVC: 2
40037200.984: RNCC: 5 | RNVC: 2
DIN3016-G1-167X20-W1-2: RNCC: 5 | RNVC: 2

16 Jun 1995

5340-12-196-8752
Angle Bracket

121968752
A-231173-001: RNCC: 3 | RNVC: 2
A231173-001: RNCC: 5 | RNVC: 2

29 Aug 1983

5340-12-372-5378
Elastic Strap

123725378
84150/5897-05: RNCC: 3 | RNVC: 2

26 Jul 2007

5340-12-180-5334
Platte

121805334
532400-0859: RNCC: 3 | RNVC: 2
532400-0859: RNCC: 5 | RNVC: 9
532400-0859.000: RNCC: 5 | RNVC: 9

17 Sep 1979

5340-12-314-5924
Angle Bracket

123145924
512214-2160.000: RNCC: 3 | RNVC: 2
512214-2160: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-12-361-9796
Casement Fastener

123619796
E3-34-25: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-12-338-0336
Retaining Strap

123380336
2200783: RNCC: 3 | RNVC: 2
3060/25-28,5MM: RNCC: 5 | RNVC: 2

15 May 1995

5340-12-330-9039
Compression Cup

123309039
480-4922-11-00-36: RNCC: 3 | RNVC: 2
480/4922-11-00-36: RNCC: 5 | RNVC: 2

24 Feb 1993

5340-12-321-9235
Headless Straight Rod

123219235
5802298-209000.00: RNCC: 2 | RNVC: 2
5802298-209000.00: RNCC: 3 | RNVC: 2

10 Jul 1990

5340-12-318-5858
Double Angle Bracket

123185858
2653-017260.00: RNCC: 2 | RNVC: 2
2653-017260.00: RNCC: 3 | RNVC: 2
2653-017260.00: RNCC: 5 | RNVC: 2

31 Jul 1989

5340-12-314-5898
Nonmetallic Bumper

123145898
DIN95364-A50X12-NR60-M10X28: RNCC: 2 | RNVC: 2
3018026-11MN60: RNCC: 5 | RNVC: 2
811.030.050.012.10X28.NR60.ST: RNCC: 5 | RNVC: 2
VG95364-A50X12-NR60-M10X28: RNCC: 5 | RNVC: 9

21 Jul 1988

5340-12-306-2424
Metal Runner

123062424
46794-001: RNCC: 3 | RNVC: 2
46 794-001: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-12-359-5513
Retaining Strap

123595513
ARS-M8-46W1: RNCC: 3 | RNVC: 2
ARS-M8-46-1518925-046: RNCC: 5 | RNVC: 2

17 Feb 2003

5340-12-146-4963
Webbing Strap

121464963
23114-4180.09: RNCC: 2 | RNVC: 2
23114-4180.09: RNCC: 3 | RNVC: 2
23114-4180-09: RNCC: 5 | RNVC: 2
23114-4180-09: RNCC: 5 | RNVC: 9
23114-4180-09: RNCC: 5 | RNVC: 9
23114-4180.09: RNCC: 5 | RNVC: 9
23114-4180-09: RNCC: 5 | RNVC: 9
23114-4180.09: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-2290
Dust And Moisture Seal Protective Cap

123592290
10-427406-259: RNCC: 3 | RNVC: 2
10-427406-259: RNCC: 5 | RNVC: 9
10-427 406-259: RNCC: 5 | RNVC: 9

14 Jan 2003

5340-12-388-5421
Helical Compression Spring Seat

123885421
5080610818: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-12-302-1844
Nonmetallic Bumper

123021844
4220780186: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-307-7057
Electrical-Mechanical Equipment Post

123077057
RP981839: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-339-0178
Double Angle Bracket

123390178
78206 22990: RNCC: 2 | RNVC: 2
7820622990: RNCC: 3 | RNVC: 2
78206 22990: RNCC: 5 | RNVC: 9

27 Sep 1995

5340-12-360-8404
Mounting Plate

123608404
ZG8248G028: RNCC: 3 | RNVC: 2
ZG8248G028: RNCC: 5 | RNVC: 9

16 Jul 2003

5340-12-389-2250
Loop Clamp

123892250
00251728: RNCC: 3 | RNVC: 2
00251728: RNCC: 5 | RNVC: 2

11 Jun 2012

5340-12-050-6382

5340-12-189-0392
Retaining Strap

121890392
9853200: RNCC: 3 | RNVC: 2
25028100000000: RNCC: 5 | RNVC: 2
F300 0T 001 2974: RNCC: 6 | RNVC: 9

19 Aug 1981

5340-12-189-5232
Loop Clamp

121895232
PAN4231EDE5222: RNCC: 3 | RNVC: 2

5 Oct 1981

5340-12-179-7594
Angle Bracket

121797594
81974860123: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-392-9845
Angle Bracket

123929845
4000007961: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-12-392-7406
Dust And Moisture Seal Protective Plug

123927406
700M10X1RAL3000: RNCC: 3 | RNVC: 2
9561490100: RNCC: 5 | RNVC: 2
700M10X1RAL3000: RNCC: 5 | RNVC: 2
GPN700M10X1-RAL3000: RNCC: 5 | RNVC: 9

3 Jul 2013

5340-12-372-4112
Snap Hook

123724112
245-80X8-V2A: RNCC: 3 | RNVC: 2
245-80X8-V2A: RNCC: 3 | RNVC: 2
025403114: RNCC: 5 | RNVC: 9

16 Jul 2007

5340-12-372-7277
Access Cover

123727277
11223510901: RNCC: 3 | RNVC: 2

15 Aug 2007

5340-12-304-0249
Nonmetallic Bumper

123040249
1173100200: RNCC: 3 | RNVC: 2

31 May 1985

5340-12-198-5634
Resilient Mount

121985634
01TL30656: RNCC: 3 | RNVC: 2

9 Feb 1984

5340-12-313-8682
Mounting Bracket

123138682
6155203541: RNCC: 3 | RNVC: 2
615 520 35 41: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-369-6602
Handwheel

123696602
64005: RNCC: 3 | RNVC: 2

7 Aug 2006

5340-12-153-0318
Loop Clamp

121530318
TLF210: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-380-5211
Angle Bracket

123805211
8831530040: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-12-313-4622
Metal Runner

123134622
2300013-6502.02: RNCC: 2 | RNVC: 2
2300013-6502.02: RNCC: 3 | RNVC: 2
2300013-6502.02: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-377-3570
Mending Plate

123773570
41269043: RNCC: 3 | RNVC: 2

12 Jan 2009

5340-12-350-9431
Loop Clamp

123509431
DIN3015-LF-3G-20-PP-W1: RNCC: 2 | RNVC: 2
SM320A-PPH-LI: RNCC: 3 | RNVC: 2
RAPG9-320: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-12-385-2923
Mechanical Stop

123852923
F1.1189-40-40-10.00-13: RNCC: 3 | RNVC: 2

18 May 2011

5340-12-702-5336
Angle Bracket

127025336
VG95211-ML-127025336: RNCC: 2 | RNVC: 2
5.51.7070.0300.11: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-196-8710
Pad Eye

121968710
160-88481: RNCC: 3 | RNVC: 2
15160-88481: RNCC: 5 | RNVC: 2
160-88481: RNCC: 5 | RNVC: 9

29 Aug 1983

5340-12-701-5948
Loop Clamp

127015948
VG95211-ML-127015948: RNCC: 2 | RNVC: 2
5.12.6501.1360.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-703-3072
Mending Plate

127033072
VG95211-ML-127033072: RNCC: 2 | RNVC: 2
5.12.2210.1605.01: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-364-3909
Spacing Threaded Standoff

123643909
2300306-181700.002.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-313-0180
Double Angle Bracket

123130180
P-086148-043: RNCC: 3 | RNVC: 2
P086148-043: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-702-5238
Mounting Bracket

127025238
VG95211-ML-127025238: RNCC: 2 | RNVC: 2
5.51.7010.0151.01: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-5966

5340-12-368-1648
Mounting Bracket

123681648
S252M1040101: RNCC: 3 | RNVC: 2

23 Dec 2005

5340-12-318-6414
Mending Plate

123186414
2300137-260650.004: RNCC: 2 | RNVC: 2
9850460: RNCC: 3 | RNVC: 2
2300137-260650.004: RNCC: 5 | RNVC: 9
9850460: RNCC: 5 | RNVC: 9

2 Aug 1989

5340-12-189-4221
Leather Strap

121894221
CF 316 191: RNCC: 3 | RNVC: 2
CF 316 191: RNCC: 5 | RNVC: 2
CF316191: RNCC: 5 | RNVC: 2
CF316191: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-12-355-4559
Access Cover

123554559
0306592: RNCC: 3 | RNVC: 2

16 Nov 2001

5340-12-191-8964
Resilient Mount

121918964
PAN5173C01: RNCC: 3 | RNVC: 2

16 Mar 1982

5340-12-042-0480

5340-12-164-7661
Butt Hinge

121647661
2608322: RNCC: 3 | RNVC: 2
2608-322: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-190-7226
Mounting Bracket

121907226
NO PRIMARY REF 12-190-7226: RNCC: 3 | RNVC: 2
7631 137289: RNCC: 5 | RNVC: 9
7631137289: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-311-3552
Angle Bracket

123113552
VD-41-91-00110-044: RNCC: 3 | RNVC: 2
VD-41-91-00110-044: RNCC: 5 | RNVC: 2
VD-41-91-00110-044: RNCC: 5 | RNVC: 9

21 Aug 1987

5340-12-391-7180
Helical Compression Spring Retainer

123917180
2500-00-319150.09: RNCC: 3 | RNVC: 2
61773395: RNCC: 5 | RNVC: 9

28 Mar 2013

5340-12-322-3437
Angle Bracket

123223437
118-03842H: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-347-3518
Lock-Release Lever

123473518
2300421-183200.026: RNCC: 2 | RNVC: 2
9917014: RNCC: 3 | RNVC: 2
2300421-183200.026: RNCC: 5 | RNVC: 2
2300421-183200.026: RNCC: 5 | RNVC: 9
9917014: RNCC: 5 | RNVC: 9

1 Dec 1998

5340-12-323-8492
Lock-Release Lever

123238492
01 106000 01: RNCC: 3 | RNVC: 2
06410-1061: RNCC: 3 | RNVC: 2
NLM6410-1061: RNCC: 5 | RNVC: 9
641-1061: RNCC: 5 | RNVC: 9

27 Dec 1990

5340-12-155-7448
Resilient Mount

121557448
89000201: RNCC: 3 | RNVC: 2
320-361-B-00.00: RNCC: 3 | RNVC: 2
834.320-361B00-00: RNCC: 5 | RNVC: 2
320-361B00-00: RNCC: 5 | RNVC: 2
320-361-B-00.00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-376-4339
Runner

123764339
J92226429-003: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-12-349-1889
Metal Grille

123491889
8852116086: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-365-4461
Mounting Bracket

123654461
947167777: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-12-374-7143
Mounting Bracket

123747143
7074146: RNCC: 3 | RNVC: 2

11 Mar 2008

5340-12-321-0191
Dust And Moisture Seal Protective Cap

123210191
PAN3863H06: RNCC: 3 | RNVC: 2

16 Mar 1990

5340-12-011-4046

5340-12-319-2075
Retaining Band

123192075
1502: RNCC: 3 | RNVC: 2
077-04-1150: RNCC: 5 | RNVC: 2

13 Sep 1989

5340-12-328-3567
Mounting Plate

123283567
SK2405-22: RNCC: 3 | RNVC: 2
2490537: RNCC: 3 | RNVC: 2
5000821582: RNCC: 5 | RNVC: 2
SK2405-22: RNCC: 5 | RNVC: 2

9 May 1992

5340-12-163-9922
Resilient Mount

121639922
331222351: RNCC: 3 | RNVC: 2
331222351: RNCC: 3 | RNVC: 2
22351: RNCC: 5 | RNVC: 2
331222351: RNCC: 5 | RNVC: 2
VG95365-A2-NR75ST-M10DURCHGEHEND: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-5930
Retaining Strap

123195930
F11.43386-0038: RNCC: 3 | RNVC: 2

16 Oct 1989

5340-12-347-6025
Mounting Bracket

123476025
8854 130-151: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-311-5967
Angle Bracket

123115967
P-245284-752: RNCC: 3 | RNVC: 2
P245284-752: RNCC: 5 | RNVC: 2

23 Sep 1987

5340-12-146-8504
Loop Clamp

121468504
DIN3016-1-A2-12-12X25-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A2-12-12X25-W1-2: RNCC: 3 | RNVC: 2
RS1.2X12/25: RNCC: 3 | RNVC: 2
4217225012: RNCC: 5 | RNVC: 2
0632 311 161: RNCC: 5 | RNVC: 2
RS1100-2X12-25: RNCC: 5 | RNVC: 2
RS1100.2X12/25: RNCC: 5 | RNVC: 2
DIN3016-A2-12-12X25-W1-2: RNCC: 5 | RNVC: 9
0632311161: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-151-3112
Butt Hinge

121513112
5800358-200000-02: RNCC: 3 | RNVC: 2
5800358-200000-02: RNCC: 5 | RNVC: 9
5800358-200000-02: RNCC: 5 | RNVC: 9
5800358-200000.02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-8831
Spring Holder

123158831
111-00-8832-0573/01-00-026: RNCC: 2 | RNVC: 2
1000232-01-02-00-00-017: RNCC: 3 | RNVC: 2
111-00-8832-0573/01-00-026: RNCC: 5 | RNVC: 9

3 Dec 1988

5340-12-381-0124
Retaining Band

123810124
41271922: RNCC: 3 | RNVC: 2
41271922: RNCC: 5 | RNVC: 2
CV170550: RNCC: 5 | RNVC: 2

22 Dec 2009

5340-12-381-0883
Manual Control Handle

123810883
0009192860: RNCC: 3 | RNVC: 2

11 Jan 2010

5340-12-186-2924
Retaining Strap

121862924
CF455428: RNCC: 3 | RNVC: 2
CF 455 428: RNCC: 5 | RNVC: 2
CF455428: RNCC: 5 | RNVC: 2
CF 455 428: RNCC: 5 | RNVC: 2

13 Dec 1980

5340-12-173-3446
Dust And Moisture Seal Protective Cap

121733446
F0546: RNCC: 3 | RNVC: 2
4252670497: RNCC: 5 | RNVC: 2

10 Apr 1978

5340-12-199-2841
Electrical-Mechanical Equipment Post

121992841
42005373: RNCC: 3 | RNVC: 2
42005373EZ5053-64: RNCC: 5 | RNVC: 2

7 Apr 1984

5340-12-349-8846
Angle Bracket

123498846
54.1038.036.00: RNCC: 2 | RNVC: 2
54.1038.036.00: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-321-9180
Access Hole Frame

123219180
FAAB007: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-12-314-1230
Access Cover

123141230
6736880035: RNCC: 3 | RNVC: 2
673 688 00 35: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-313-5875
Hook Handle

123135875
20809-294: RNCC: 3 | RNVC: 2

19 Apr 1988

5340-12-320-4237
Mounting Bracket

123204237
3664 0341 005: RNCC: 3 | RNVC: 2

12 Jan 1990

5340-12-193-3986
Dust And Moisture Seal Protective Cap

121933986
01TC34237: RNCC: 3 | RNVC: 2

19 Jul 1982

5340-12-363-0526
Mounting Bracket

123630526
925907077: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-364-1075
Mounting Plate

123641075
4375516240: RNCC: 3 | RNVC: 2

20 Aug 2004

5340-12-384-9722
Spacing Threaded Standoff

123849722
69046: RNCC: 3 | RNVC: 2

14 Apr 2011

5340-12-348-8602
Angle Bracket

123488602
4374260446: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-12-391-4759
Access Cover

123914759
I001661: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-094-1094

5340-12-319-6856
Mounting Plate

123196856
5801411-4145.005: RNCC: 3 | RNVC: 2

25 Oct 1989

5340-12-164-9230
Nonmetallic Bumper

121649230
3420026000: RNCC: 3 | RNVC: 2
PNF1/501X: RNCC: 5 | RNVC: 2
PHF1-501X: RNCC: 5 | RNVC: 2
0003000509: RNCC: 5 | RNVC: 2
3000509: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-189-4836
Nonmetallic Bumper

121894836
65.7112.730.00-A001: RNCC: 3 | RNVC: 2
186227: RNCC: 5 | RNVC: 2
65-7112-730-00A001: RNCC: 5 | RNVC: 2

30 Sep 1981

5340-12-357-6320
Spring Tension Clip

123576320
032121142: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-357-8644
Multiple Angle Bracket

123578644
2300042-255282.000: RNCC: 2 | RNVC: 2
2300042-255282.000: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-12-176-4070
Retaining Strap

121764070
LN29836B16: RNCC: 2 | RNVC: 2

27 Nov 1978

5340-12-177-0884
Nonmetallic Bumper

121770884
183885377: RNCC: 3 | RNVC: 2

15 Jan 1979

5340-12-020-7085

5340-12-341-8369
Helical Compression Spring Seat

123418369
1000173-343100.004.0: RNCC: 2 | RNVC: 2
1000173-343100.004.0: RNCC: 3 | RNVC: 2

1 Nov 1996

5340-12-374-2616
Access Cover

123742616
L521M1034103: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-335-3558
Angle Bracket

123353558
G10-74-117-30-0: RNCC: 3 | RNVC: 2
G10-74-117-30-0: RNCC: 5 | RNVC: 9

12 Aug 1994

5340-12-315-2611
Double Angle Bracket

123152611
5-516-0536: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-12-199-3543
Compression Cup

121993543
T120-1-88NBR/101: RNCC: 3 | RNVC: 2

14 Apr 1984

5340-12-338-9271
Webbing Strap

123389271
708-232300-000-0: RNCC: 2 | RNVC: 2
708-232300-000-0: RNCC: 3 | RNVC: 2
708 232300-000-0: RNCC: 5 | RNVC: 2

11 Sep 1995

5340-12-154-5736
Spring Tension Clip

121545736
C42117-A248-C217: RNCC: 3 | RNVC: 2
5800828-145-004: RNCC: 5 | RNVC: 2
5800828-145.004: RNCC: 5 | RNVC: 2
H38-4771-50: RNCC: 5 | RNVC: 2
C42117A248C217: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-2945
Double Angle Bracket

123262945
3964750003: RNCC: 3 | RNVC: 2
396 475 00 03: RNCC: 5 | RNVC: 2

27 Aug 1991

5340-12-180-6879
Spring Window Bolt

121806879
3817250379: RNCC: 3 | RNVC: 2

26 Sep 1979

5340-12-363-5134
Flush Lock

123635134
954258: RNCC: 3 | RNVC: 2
954258: RNCC: 5 | RNVC: 2

23 Jun 2004

5340-12-360-9078
Door Button

123609078
62710188: RNCC: 3 | RNVC: 2

23 Jul 2003

5340-12-352-4163
Mounting Bracket

123524163
T251M4013101: RNCC: 3 | RNVC: 2

17 Nov 2000

5340-12-391-7092
Mounting Bracket

123917092
I006100: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-12-333-5104
Access Cover

123335104
388532: RNCC: 3 | RNVC: 2

28 Dec 1993

5340-12-307-6335
Butt Hinge Leaf

123076335
A-243833-401: RNCC: 3 | RNVC: 2
A243833-401: RNCC: 5 | RNVC: 2

10 Jul 1986

5340-12-170-2437
Spring Tension Clip

121702437
PAN3089-13: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-185-1173
Double Angle Bracket

121851173
F01-213130.03.0: RNCC: 3 | RNVC: 2
F01-213130-03-0: RNCC: 5 | RNVC: 2

11 Sep 1980

5340-12-317-7674
Angle Bracket

123177674
P-297201-483: RNCC: 3 | RNVC: 2
P297201-483: RNCC: 5 | RNVC: 2

11 May 1989

5340-12-150-6407
Loop Clamp

121506407
DIN3016-2-G1-41X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-41X15-W1-2: RNCC: 3 | RNVC: 2
SP41/15SKZ: RNCC: 3 | RNVC: 2
SP41-15SKZ: RNCC: 5 | RNVC: 2
1410000041: RNCC: 5 | RNVC: 2
VG95931-G41X15-W1: RNCC: 5 | RNVC: 9
VG95931G41X15W1: RNCC: 5 | RNVC: 9
DIN3016-G1-41X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-309-9193
Dust And Moisture Seal Protective Cap

123099193
1361016-17020.01: RNCC: 3 | RNVC: 2
1361016-17020-01: RNCC: 5 | RNVC: 2

18 Mar 1987

5340-12-184-4115
Resilient Mount

121844115
E1FH 77: RNCC: 3 | RNVC: 2
56-1005-010-04LV: RNCC: 5 | RNVC: 2
E1FH 77-01: RNCC: 5 | RNVC: 2
E1FH77: RNCC: 5 | RNVC: 2
E1FH77-01: RNCC: 5 | RNVC: 2

24 Jul 1980

5340-12-301-7664
Metal Runner

123017664
537181-0215.000: RNCC: 3 | RNVC: 2
53 71 81-0215: RNCC: 5 | RNVC: 9
53 71 81-0215: RNCC: 5 | RNVC: 9
537181-0215: RNCC: 5 | RNVC: 9
537181-0215.000: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-12-150-4540

5340-12-374-7029
Retaining Strap

123747029
705410332: RNCC: 3 | RNVC: 2

10 Mar 2008

5340-12-140-4070

5340-12-348-8089
Angle Bracket

123488089
3874296740: RNCC: 3 | RNVC: 2

23 Aug 1999

5340-12-375-2476
Bumper

123752476
9152830462: RNCC: 3 | RNVC: 2

7 May 2008

5340-12-132-3018

5340-12-323-8294
Mending Plate

123238294
0287 7604: RNCC: 3 | RNVC: 2

21 Dec 1990

5340-12-359-7120
Manual Control Lever

123597120
9704310439: RNCC: 3 | RNVC: 2

4 Mar 2003

5340-12-156-6029
Bail Handle

121566029
7762-3: RNCC: 3 | RNVC: 1
1-6899-15-4-6728: RNCC: 5 | RNVC: 9
15-2-6727-1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-358-1639
Access Cover

123581639
4037R-310400.022.0: RNCC: 2 | RNVC: 2
4037R-310400.022.0: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-12-196-2770
Angle Bracket

121962770
P-297137-001: RNCC: 3 | RNVC: 2
P297137-001: RNCC: 5 | RNVC: 2

22 Jun 1983

5340-12-702-4160
Mounting Bracket

127024160
VG95211-ML-127024160: RNCC: 2 | RNVC: 2
5.12.6602.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-350-2115
Mounting Bracket

123502115
5.042-254: RNCC: 3 | RNVC: 2
5-042-254: RNCC: 5 | RNVC: 9

29 Feb 2000

5340-12-392-5937
Mounting Plate

123925937
M2557426622400: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-12-174-0364
Dust And Moisture Seal Protective Cap

121740364
E24269: RNCC: 3 | RNVC: 2

31 May 1978

5340-12-359-8307
Bridge Clamp

123598307
2800-392850.002.0: RNCC: 2 | RNVC: 2
2800-392850.002.0: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-369-4028
Runner

123694028
3042041: RNCC: 3 | RNVC: 2
3042.041: RNCC: 5 | RNVC: 2

29 Jun 2006

5340-12-317-5821
Angle Bracket

123175821
42036092: RNCC: 3 | RNVC: 2
42036092ED5021-68: RNCC: 5 | RNVC: 2

19 Apr 1989

5340-12-328-9330
Access Cover

123289330
021.451752: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-091-4478

5340-12-330-2988
Electrical-Mechanical Equipment Post

123302988
0853 1200.024: RNCC: 3 | RNVC: 2
8531200.024: RNCC: 5 | RNVC: 2

28 Nov 1992

5340-12-094-5230

5340-12-323-4202
Snap Hook

123234202
3120909 V: RNCC: 3 | RNVC: 2
245S90X9VERZINKT: RNCC: 3 | RNVC: 2
245 S-90X9 VERZINKT: RNCC: 3 | RNVC: 9
245S90X9MM: RNCC: 5 | RNVC: 2
245S-90X9VERZINKT: RNCC: 5 | RNVC: 9

23 Nov 1990

5340-12-188-6788
Butt Hinge

121886788
A-245875-003: RNCC: 3 | RNVC: 2
A245875-003: RNCC: 5 | RNVC: 2

23 Jul 1981

5340-12-129-2846
Padlock

121292846
DIN7465-A40-MS-ST-VERZINKT: RNCC: 2 | RNVC: 2
A40DIN7465MSSTVERZINKT: RNCC: 5 | RNVC: 2
CH1915.1/01.60: RNCC: 5 | RNVC: 2
1203 9458: RNCC: 5 | RNVC: 2
A40DIN7465-MS-ST-VERZINKT: RNCC: 5 | RNVC: 2
DIN7465-D1-40-ZN-MS-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-354-8173
Electronic Equipment Hardware Kit

123548173
R05334-801: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-363-9932
Retaining Strap

123639932
700325012104: RNCC: 3 | RNVC: 2
2/1D9-12MMN325: RNCC: 5 | RNVC: 2

10 Aug 2004

5340-12-319-3346
Mending Plate

123193346
2300232-180000.001.0: RNCC: 2 | RNVC: 2
2300232-180000.001.0: RNCC: 3 | RNVC: 2
2300232-180000.001.02: RNCC: 5 | RNVC: 9
2300232-180000.001.02: RNCC: 5 | RNVC: 9

25 Sep 1989

5340-12-390-6948
Electronic Equipment Hardware Kit

123906948
ET8405G029: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-12-359-3959
Quick Release Plunger

123593959
MBBN966AM6: RNCC: 3 | RNVC: 2

31 Jan 2003

5340-12-198-4377
Ball Socket Seat

121984377
3522930012: RNCC: 3 | RNVC: 2

27 Jan 1984

5340-12-315-9405
Angle Bracket

123159405
28200786041: RNCC: 3 | RNVC: 2
28200786041: RNCC: 5 | RNVC: 2

9 Dec 1988

5340-12-327-7858
Loop Clamp

123277858
6310220: RNCC: 3 | RNVC: 2
631.0220.00: RNCC: 5 | RNVC: 2

5 Mar 1992

5340-12-372-2081
Mounting Plate

123722081
S931I80A1205: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-12-164-0364

5340-12-020-7080

5340-12-324-0739
Loop Clamp

123240739
23223-261012.00.0: RNCC: 2 | RNVC: 2
23223-261012.00.0: RNCC: 3 | RNVC: 2
23223-261012.00.0: RNCC: 3 | RNVC: 2
23223-261012.000: RNCC: 5 | RNVC: 9

18 Jan 1991

5340-12-323-9290
Nonmetallic Bumper

123239290
2.72-31833 ARTIKEL NR.1429: RNCC: 3 | RNVC: 2
2.72-31833 ITEM 1429: RNCC: 5 | RNVC: 2
1429: RNCC: 5 | RNVC: 2

9 Jan 1991

5340-12-701-2585
Mounting Bracket

127012585
VG95211-ML-127012585: RNCC: 2 | RNVC: 2
5.12.4203.8010.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-334-5980
Support Hook

123345980
0002-100822A02B: RNCC: 2 | RNVC: 2
04.3110.02: RNCC: 3 | RNVC: 2
0002-100822A02B: RNCC: 5 | RNVC: 2
936/1-RAL6031-F9: RNCC: 5 | RNVC: 2

27 May 1994

5340-12-131-5606
Turnbuckle

121315606
DIN1480-SPM22-OESEN-TZN600: RNCC: 2 | RNVC: 2
SP-DIN1480-M22-OE/OE-TZN600: RNCC: 3 | RNVC: 2
4100022V: RNCC: 5 | RNVC: 2
DIN1480-SPM22-OESE-OESE-TZN600: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-163-9917
Resilient Mount

121639917
SCHIENE-38478A/I-NR55.ST: RNCC: 3 | RNVC: 2
1022203000: RNCC: 3 | RNVC: 2
38478A/I-NR55ST: RNCC: 5 | RNVC: 2
00715: RNCC: 5 | RNVC: 2
331200715: RNCC: 5 | RNVC: 2
38478A/ISM550: RNCC: 5 | RNVC: 9
38478A1SM550: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-169-2092
Resilient Mount

121692092
DIN95363-A50X30-M10X20-NR60ST: RNCC: 2 | RNVC: 2
0602-006: RNCC: 5 | RNVC: 2
500042-M10X20.NR60.ST: RNCC: 5 | RNVC: 2
62528AUSF1-60SHOREA: RNCC: 5 | RNVC: 2
0602006: RNCC: 5 | RNVC: 2
8405872: RNCC: 5 | RNVC: 2
AM3.21-26A: RNCC: 5 | RNVC: 9
K1192-1: RNCC: 5 | RNVC: 9
AM3-21-26A: RNCC: 5 | RNVC: 9
VG95363-A50X30-M10X20-NR60ST: RNCC: 5 | RNVC: 9

22 Apr 1977

5340-12-189-1824
Angle Bracket

121891824
8-1142.15: RNCC: 2 | RNVC: 2
8-1142-15: RNCC: 2 | RNVC: 2
8-1142.15: RNCC: 3 | RNVC: 2
8-1142-15: RNCC: 5 | RNVC: 9
8-1142.15: RNCC: 5 | RNVC: 9

9 Sep 1981

5340-12-300-7986
T Plate

123007986
23114-4173.00: RNCC: 2 | RNVC: 2
23114-4173.00: RNCC: 3 | RNVC: 2
23114-4173.00: RNCC: 5 | RNVC: 9
23114-4173-00: RNCC: 5 | RNVC: 9
23114-4173.00: RNCC: 5 | RNVC: 9
23114-4173-00: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-365-8423
Access Cover

123658423
M-38-030-10.0/1: RNCC: 3 | RNVC: 2

11 Feb 2005

5340-12-154-3402
Webbing Strap

121543402
VG95211-ML-121543402: RNCC: 2 | RNVC: 2
160-72077: RNCC: 3 | RNVC: 2
160-72077: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-332-5257
Handle Grip

123325257
DIN98-E32-FS-VERZINKT: RNCC: 2 | RNVC: 2
DIN98-E32-FS-A3P: RNCC: 5 | RNVC: 2
E32DIN98-FS-VERZINKT: RNCC: 5 | RNVC: 9

18 Aug 1993

5340-12-179-6367
Electrical-Mechanical Equipment Post

121796367
5800748-47.007: RNCC: 3 | RNVC: 2
5800748-47-007: RNCC: 5 | RNVC: 9

13 Jul 1979

5340-12-320-4730
Manual Control Lever

123204730
15135-001-010: RNCC: 3 | RNVC: 2
15135-01-10: RNCC: 5 | RNVC: 9

18 Jan 1990

5340-12-352-9881
Flush Lock

123529881
M02121: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-308-9428
Loop Clamp

123089428
B16BX31TAN15836: RNCC: 3 | RNVC: 2
B16BX31TAN15836: RNCC: 3 | RNVC: 2

28 Nov 1986

5340-12-378-9842
Manual Control Handle

123789842
98 8663 93: RNCC: 3 | RNVC: 2
98866393: RNCC: 5 | RNVC: 2
CV146167: RNCC: 5 | RNVC: 2

9 Jun 2009

5340-12-310-0150
Butt Hinge

123100150
261733: RNCC: 3 | RNVC: 2

30 Mar 1987

5340-12-360-7083
Mounting Bracket

123607083
000611-215000.00: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-380-1147
Mounting Bracket

123801147
S533M7006222: RNCC: 3 | RNVC: 2

29 Sep 2009

5340-12-190-3791
Loop Clamp

121903791
PAN4231CBBC5218: RNCC: 3 | RNVC: 2

24 Nov 1981

5340-12-365-8536
Mechanical Stop

123658536
05178500: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-12-337-7035
Strap Fastener Loop

123377035
1238600514: RNCC: 3 | RNVC: 2
123 860 05 14: RNCC: 5 | RNVC: 2
123 860 05 14: RNCC: 5 | RNVC: 2

30 Mar 1995

5340-12-175-2138
Bow Handle

121752138
81970010215: RNCC: 3 | RNVC: 2

30 Aug 1978

5340-12-370-8758
Mending Plate

123708758
187420315: RNCC: 3 | RNVC: 2

11 Jan 2007

5340-12-187-8569
Spring Tension Clip

121878569
201465010004: RNCC: 3 | RNVC: 2
201465010004: RNCC: 5 | RNVC: 2

13 May 1981

5340-12-389-6664
Mechanic Equipment Hardware Kit

123896664
5801525-4800.00: RNCC: 2 | RNVC: 2
5801525-4800.00: RNCC: 3 | RNVC: 2

8 Aug 2012

5340-12-339-0931
Mounting Bracket

123390931
4900319-301100.00: RNCC: 2 | RNVC: 2
4900319-301100.00: RNCC: 3 | RNVC: 2

10 Oct 1995

5340-12-306-1879
Metal Runner

123061879
36876-001: RNCC: 3 | RNVC: 2
36 876-001: RNCC: 5 | RNVC: 9

4 Feb 1986

5340-12-368-7346
Mechanical Stop

123687346
313636: RNCC: 3 | RNVC: 2
0854-03-10-00/37: RNCC: 5 | RNVC: 2

11 Apr 2006

5340-12-360-1867
Mounting Plate

123601867
2300458-982092.000: RNCC: 2 | RNVC: 2
2300458-982092.000: RNCC: 3 | RNVC: 2

15 Apr 2003

5340-12-387-9143
Retaining Bail

123879143
7092888: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-12-368-9326
Angle Bracket

123689326
1477270: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-337-2198
Butt Hinge

123372198
NO PRIMARY REF 12-337-2198: RNCC: 3 | RNVC: 2
23-300.100.02: RNCC: 5 | RNVC: 9

3 Feb 1995

5340-12-391-6325
Bow Handle

123916325
R2-08.088.01: RNCC: 3 | RNVC: 2

22 Mar 2013

5340-12-371-8079
Mounting Plate

123718079
8350-0258: RNCC: 2 | RNVC: 2
8350-0258: RNCC: 3 | RNVC: 2

18 May 2007

5340-12-304-4141
Angle Bracket

123044141
2500093-1300.27: RNCC: 2 | RNVC: 2
2500093-1300.27: RNCC: 3 | RNVC: 2
2500093-1300.27: RNCC: 5 | RNVC: 9

16 Jul 1985

5340-12-186-8062
Dust And Moisture Seal Protective Cap

121868062
BN672000: RNCC: 3 | RNVC: 2
5800583-500006.101: RNCC: 5 | RNVC: 2
67000-00: RNCC: 5 | RNVC: 2
BN151713: RNCC: 5 | RNVC: 2

6 Feb 1981

5340-12-302-2960
Angle Bracket

123022960
2300164-291091.002: RNCC: 2 | RNVC: 2
2300164-291091.002: RNCC: 3 | RNVC: 2
2300164-291091.002: RNCC: 3 | RNVC: 2
2300164-291091.002: RNCC: 5 | RNVC: 9
2300164-291091-002: RNCC: 5 | RNVC: 9
2300164-291091.002: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-12-177-1577
Angle Bracket

121771577
5801214-1011-005: RNCC: 3 | RNVC: 2
5801214-1011.005: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-342-8301
Retaining Strap

123428301
VG95211-ML-123428301: RNCC: 2 | RNVC: 2
000000-0075.849: RNCC: 3 | RNVC: 2
000000-0075.849: RNCC: 5 | RNVC: 2
000000-0075.849: RNCC: 5 | RNVC: 9

8 Apr 1997

5340-12-315-3170
Handle Grip

123153170
409059040: RNCC: 3 | RNVC: 2
409-059-040: RNCC: 5 | RNVC: 2
409.059.040: RNCC: 5 | RNVC: 9

12 Oct 1988

5340-12-341-5733
Mending Plate

123415733
347-150-013: RNCC: 3 | RNVC: 2

24 Sep 1996

5340-12-190-4824
Electrical-Mechanical Equipment Post

121904824
CF 455 664 A: RNCC: 3 | RNVC: 2
CF 455 664 A: RNCC: 5 | RNVC: 2
CF455664A: RNCC: 5 | RNVC: 2
CF455664A: RNCC: 5 | RNVC: 2

1 Dec 1981

5340-12-314-8574
Spring Tension Clip

123148574
2360-261114.02.0: RNCC: 2 | RNVC: 2
2360-261114.02.0: RNCC: 3 | RNVC: 2
2360-261114.02.0: RNCC: 5 | RNVC: 2

19 Aug 1988

5340-12-314-8575
Spring Tension Clip

123148575
2360-261116.02.0: RNCC: 2 | RNVC: 2
2360-261116.02.0: RNCC: 3 | RNVC: 2
2360-261116.02.0: RNCC: 5 | RNVC: 2

19 Aug 1988

5340-12-333-1059
Mounting Bracket

123331059
6600153-982170.000.0: RNCC: 2 | RNVC: 2
6600153-982170.000.0: RNCC: 3 | RNVC: 2

29 Oct 1993

5340-12-167-8035
Screw Hook

121678035
CF 409 463 A: RNCC: 2 | RNVC: 2
CF 409 463 A: RNCC: 3 | RNVC: 2
CF 409 463 A: RNCC: 5 | RNVC: 2
CF409463A: RNCC: 5 | RNVC: 2
CF 409 463 A: RNCC: 5 | RNVC: 2
CF409463A: RNCC: 5 | RNVC: 2
CF409463A: RNCC: 5 | RNVC: 2

24 Jan 1977

5340-12-392-2809
Butt Hinge Leaf

123922809
DF 300 597 A: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-375-3875
Dust And Moisture Seal Protective Plug

123753875
TDP-375SW: RNCC: 3 | RNVC: 2
351091SW: RNCC: 5 | RNVC: 2

28 May 2008

5340-12-094-6271

5340-12-349-4508
Loop Holder

123494508
9857125076: RNCC: 3 | RNVC: 2
98571 25076: RNCC: 5 | RNVC: 9

17 Nov 1999

5340-12-388-4471
Section Block Clamp

123884471
5849956068: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-387-4208
Nut And Bolt Head Protective Cap

123874208
Z1590: RNCC: 3 | RNVC: 2

14 Dec 2011

5340-12-394-1199
Mounting Bracket

123941199
L5537005320600: RNCC: 3 | RNVC: 2

6 Nov 2013

5340-12-159-2930
Angle Bracket

121592930
117571806: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-303-6759
Angle Bracket

123036759
3637021004: RNCC: 3 | RNVC: 2
36370 21004: RNCC: 5 | RNVC: 9

22 Apr 1985

5340-12-301-3815
Double Angle Bracket

123013815
P-855120-006: RNCC: 3 | RNVC: 2
P855120-006: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-12-166-8979
Retaining Strap

121668979
23290-203000.002: RNCC: 2 | RNVC: 2
23290-203000.002: RNCC: 3 | RNVC: 2
23290-203000-002: RNCC: 5 | RNVC: 9
23290-203000.002: RNCC: 5 | RNVC: 9

29 Oct 1976

5340-12-196-9880
Angle Bracket

121969880
A-230129-169: RNCC: 3 | RNVC: 2
A230129-169: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-326-4400
Loop Clamp

123264400
DIN3016-D1-30X20-W1-2 MVQ1-70: RNCC: 2 | RNVC: 2
DIN3016-D1-30X20-W1-2 MVQ1-70: RNCC: 3 | RNVC: 2
RSGU1.30/20-W1-MVQ-1-70: RNCC: 3 | RNVC: 2
0117 6343: RNCC: 5 | RNVC: 2
H3223-C30X20-ST/DEUTZ MVQ1-70: RNCC: 5 | RNVC: 2
DIN3016-D1-30X20W1-2-MVQ-1-70: RNCC: 5 | RNVC: 2

16 Sep 1991

5340-12-323-9701
Lock-Release Lever

123239701
2300002-187230.000: RNCC: 2 | RNVC: 2
2300002-187230.000: RNCC: 3 | RNVC: 2
2300002-187230.000: RNCC: 5 | RNVC: 9
2300002-187230.000: RNCC: 5 | RNVC: 9

11 Jan 1991

5340-12-340-0212
Loop Clamp

123400212
DIN3016-2-G1-14X20W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-14X20-W1-2: RNCC: 3 | RNVC: 2
SP14/20SKZ-W1: RNCC: 3 | RNVC: 2
DIN3016-G1-14X20W1-1: RNCC: 5 | RNVC: 2
SP14/20SKZ: RNCC: 5 | RNVC: 2
DIN3016-G1-14X20W1-2: RNCC: 5 | RNVC: 9

14 Feb 1996

5340-12-339-6460
Loop Clamp

123396460
DIN3016-2-G1-240X9-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-240X9-W1-2: RNCC: 3 | RNVC: 2
SP240/9 SKZ-W1: RNCC: 3 | RNVC: 2
SP240/9SZ: RNCC: 5 | RNVC: 2
SP240/9SKZ: RNCC: 5 | RNVC: 2
DIN3016-G1-240X9-W1-2: RNCC: 5 | RNVC: 9

18 Dec 1995

5340-12-315-1833
Loop Clamp

123151833
DIN3015-LA-K-1R-12-PP-W1: RNCC: 2 | RNVC: 2
SP112A-PP-DP-AS: RNCC: 3 | RNVC: 2
RAPR3-112: RNCC: 3 | RNVC: 2
HRL1A12PP STMBL: RNCC: 3 | RNVC: 2
RAPR3-112: RNCC: 5 | RNVC: 2
DIN3015-LA1R-12PP-W1-K: RNCC: 5 | RNVC: 2
RAPE3-112: RNCC: 5 | RNVC: 2
SP112APP-DP-AS: RNCC: 5 | RNVC: 2
SP112A-PP-DP-AS: RNCC: 5 | RNVC: 2
330135: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-167-3023
Hand Crank

121673023
4096.0,75.1/1.00: RNCC: 3 | RNVC: 2
4096-0-75-1-00RECHTS: RNCC: 5 | RNVC: 2

14 Dec 1976

5340-12-197-5839
Mending Plate

121975839
A-230129-139: RNCC: 3 | RNVC: 2
A230129-139: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-192-3795
Resilient Mount

121923795
442.01.2-4.1461: RNCC: 3 | RNVC: 2
442-2-4-1461TYPE01: RNCC: 5 | RNVC: 2
42487879: RNCC: 5 | RNVC: 2
42487879EY0147-20: RNCC: 5 | RNVC: 2

20 Apr 1982

5340-12-300-8442
Mending Plate

123008442
3521420912: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-315-1880
Angle Bracket

123151880
3878913531: RNCC: 3 | RNVC: 2
387 891 35 31: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-317-4370
Flush Catch Claw

123174370
80100088: RNCC: 3 | RNVC: 2

7 Apr 1989

5340-12-366-2237
Helical Compression Spring Seat

123662237
5841870118: RNCC: 3 | RNVC: 2

23 Mar 2005

5340-12-339-0490
Mounting Plate

123390490
6011591540: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-352-4166
Angle Bracket

123524166
T257M1013801: RNCC: 3 | RNVC: 2

17 Nov 2000

5340-12-359-2711
Pad Eye

123592711
2500296-600.00: RNCC: 2 | RNVC: 2
7985296: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-12-387-3546
Dust And Moisture Seal Protective Plug

123873546
4857460-4S: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-12-348-0376
Angle Bracket

123480376
435 524 33 40: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-12-187-6727
Quick Release Plunger

121876727
542.9475: RNCC: 3 | RNVC: 2
5429475: RNCC: 5 | RNVC: 9
5801703-080000: RNCC: 5 | RNVC: 9

27 Apr 1981

5340-12-366-6516
Mounting Bracket

123666516
946592377: RNCC: 3 | RNVC: 2
3502-100.01.00.007-000: RNCC: 5 | RNVC: 2

19 May 2005

5340-12-352-7884
Spring Window Bolt

123527884
498101029: RNCC: 3 | RNVC: 2
49810-1029: RNCC: 5 | RNVC: 2

16 Dec 2000

5340-12-193-8184
Angle Bracket

121938184
C22136-A1000-C858: RNCC: 3 | RNVC: 2
C22136A1000C858: RNCC: 5 | RNVC: 2

2 Sep 1982

5340-12-181-9948
Loop Clamp

121819948
DIN3016-1-D2-12-12-12X20-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.3X12/20: RNCC: 3 | RNVC: 2
DIN3016-D2-12-12-12X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1100-3X12-20: RNCC: 5 | RNVC: 2
RSGU1100.3X12/20: RNCC: 5 | RNVC: 2
4219320012: RNCC: 5 | RNVC: 2
DIN3016-D2-12-12-12X20-W1-2: RNCC: 5 | RNVC: 9

4 Jan 1980

5340-12-187-1422
Electrical-Mechanical Equipment Post

121871422
4-014-11-26000-03: RNCC: 3 | RNVC: 2
4-014-11-26000-03: RNCC: 5 | RNVC: 9

6 Mar 1981

5340-12-143-6505
Clamping Catch

121436505
C20123-A5-A53: RNCC: 3 | RNVC: 2
C20123-F5-A53: RNCC: 5 | RNVC: 2
T.BSCHL.5BC: RNCC: 5 | RNVC: 2
C20123A5A53: RNCC: 5 | RNVC: 2
C20123F5A53: RNCC: 5 | RNVC: 2
TBSCHL5BC: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-173-7914
Loop Clamp

121737914
P-296652-407: RNCC: 3 | RNVC: 2
P296652-407: RNCC: 5 | RNVC: 2

16 May 1978

5340-12-308-2910
Butt Hinge

123082910
P-875232-401: RNCC: 3 | RNVC: 2
P875232-401: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-702-5361
Angle Bracket

127025361
VG95211-ML-127025361: RNCC: 2 | RNVC: 2
5.51.7204.0641.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-377-6239
Angle Bracket

123776239
2300264-202000.01.0: RNCC: 3 | RNVC: 2

29 Jan 2009

5340-12-702-4026
Mounting Bracket

127024026
VG95211-ML-127024026: RNCC: 2 | RNVC: 2
5.12.5850.0901.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-165-3733
Rod End Clevis

121653733
105-071-325-1: RNCC: 3 | RNVC: 2

23 Apr 1976

5340-12-315-5797
Mending Plate

123155797
512214-0318.000: RNCC: 3 | RNVC: 2
512214-0318: RNCC: 5 | RNVC: 2

10 Nov 1988

5340-12-388-3811
Butt Hinge

123883811
212-9047: RNCC: 3 | RNVC: 2
37000-63: RNCC: 5 | RNVC: 2

15 Mar 2012

5340-12-392-0772
Dust And Moisture Seal Protective Cap-Plug

123920772
SPF14.1427/BR: RNCC: 3 | RNVC: 2

2 May 2013

5340-12-388-9521
Access Cover

123889521
3504-0001: RNCC: 3 | RNVC: 2

9 May 2012

5340-12-332-7320
Quick Release Plunger

123327320
00009198780: RNCC: 3 | RNVC: 9
KW10.300-6012: RNCC: 5 | RNVC: 9

13 Sep 1993

5340-12-352-2605
Mounting Plate

123522605
6700017-207100.03: RNCC: 2 | RNVC: 2
6700017-207100.03: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-12-148-8160
Lock-Release Lever

121488160
23114-6041-03: RNCC: 2 | RNVC: 2
23114-6041-03: RNCC: 3 | RNVC: 2
23114-6041-03: RNCC: 5 | RNVC: 9
23114-6041-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-179-7378
Plain Solid Disk

121797378
5800828-134242-002: RNCC: 3 | RNVC: 2
5800828-134242.002: RNCC: 5 | RNVC: 2

25 Jul 1979

5340-12-330-8885
Metallic Bumper

123308885
480-7345-13-00-33: RNCC: 3 | RNVC: 2
480/7345-13-00-33: RNCC: 5 | RNVC: 2

19 Feb 1993

5340-12-306-6616
Angle Bracket

123066616
704-152500-902-0: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-12-307-4772
Snap Hook

123074772
DIN5297-C80X16GT-ZN: RNCC: 2 | RNVC: 2
DIN5297-C80X16GT-VERZINKT: RNCC: 3 | RNVC: 2
112-5/8 TEMPERGUSZ VERZINKT: RNCC: 3 | RNVC: 9

23 Jun 1986

5340-12-310-4751
Loop Clamp

123104751
023807: RNCC: 3 | RNVC: 2

25 May 1987

5340-12-367-9212
Retaining Bail

123679212
0025315760: RNCC: 3 | RNVC: 2

4 Nov 2005

5340-12-350-3099
Mounting Bracket

123503099
2300324-250715.000: RNCC: 2 | RNVC: 2
9937151: RNCC: 3 | RNVC: 2
2300324-250715.000: RNCC: 5 | RNVC: 2
2300324-250715.000: RNCC: 5 | RNVC: 9
9937151: RNCC: 5 | RNVC: 9

15 Mar 2000

5340-12-315-9073
Mounting Bracket

123159073
54.0026.172.00: RNCC: 3 | RNVC: 2
54002617200: RNCC: 5 | RNVC: 2

7 Dec 1988

5340-12-345-4378
Mounting Bracket

123454378
54.0053.245.00: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-12-301-6358
Mending Plate

123016358
43712104-601: RNCC: 2 | RNVC: 2
43712104-601: RNCC: 3 | RNVC: 2
43712104-601: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-195-4091
Catch Strike

121954091
SCHLIESZKASTEN FUER 1169: RNCC: 3 | RNVC: 2
SCHLIESKASTE FUER 1169: RNCC: 5 | RNVC: 2

21 Feb 1983

5340-12-379-9877
Mounting Plate

123799877
58050713: RNCC: 3 | RNVC: 2
58050713: RNCC: 5 | RNVC: 2
CV169088: RNCC: 5 | RNVC: 2

17 Sep 2009

5340-12-316-9662
Angle Bracket

123169662
3522932536: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-173-7500
Loop Clamp

121737500
TL212: RNCC: 3 | RNVC: 2

8 May 1978

5340-12-348-0319
Mounting Bracket

123480319
026905251: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-12-357-3462
Door Button

123573462
5581439: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-12-359-5497
Retaining Clip

123595497
2028350142: RNCC: 3 | RNVC: 2

17 Feb 2003

5340-12-336-2842
Access Cover

123362842
4620 335 083: RNCC: 3 | RNVC: 2
4620335083: RNCC: 5 | RNVC: 9

7 Nov 1994

5340-12-193-5628
Spring Tension Clip

121935628
2300174-970230: RNCC: 2 | RNVC: 2
2300174-970230: RNCC: 3 | RNVC: 2
2300174-970230: RNCC: 5 | RNVC: 9

3 Aug 1982

5340-12-302-6132
Lock-Release Lever

123026132
6094904970: RNCC: 3 | RNVC: 2
6094904970: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-359-3207
Handle Grip

123593207
32727658870: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-12-134-4516

5340-12-347-9217
Befestigun Schelle

5340-12-175-1102
An Scharnierlappen

5340-12-375-7190
Retaining Clip

123757190
056626: RNCC: 3 | RNVC: 2

27 Jun 2008

5340-12-142-0358
Gurt

121420358
SN122X: RNCC: 3 | RNVC: 2
SN122X: RNCC: 5 | RNVC: 2
21C3696: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-350-3096
Mounting Plate

123503096
2300324-250050.003: RNCC: 2 | RNVC: 2
9937157: RNCC: 3 | RNVC: 2
2300324-250050.003: RNCC: 5 | RNVC: 2
2300324-250050.003: RNCC: 5 | RNVC: 9
9937157: RNCC: 5 | RNVC: 9

15 Mar 2000

5340-12-363-8830
Antipilferage Seal

123638830
450 7759-801: RNCC: 3 | RNVC: 2
450 7759-801: RNCC: 5 | RNVC: 2

31 Jul 2004

5340-12-162-2001
Friction Catch Stud

121622001
3414028715: RNCC: 3 | RNVC: 2
34140 28715: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-044-1930

5340-12-190-7756
Helical Compression Spring Seat

121907756
32-CFAG: RNCC: 3 | RNVC: 2
CFAG32: RNCC: 5 | RNVC: 2

14 Dec 1981

5340-12-390-3249
Mechanic Equipment Hardware Kit

123903249
8451111420AA: RNCC: 3 | RNVC: 2

30 Oct 2012

5340-12-180-8628
Rod End Connector

121808628
3521500572: RNCC: 3 | RNVC: 2

8 Oct 1979

5340-12-337-0908
Spacing Threaded Standoff

123370908
1000089-90210.01: RNCC: 2 | RNVC: 2
1000089-90210.01: RNCC: 3 | RNVC: 2

18 Jan 1995

5340-12-309-9638
Mending Plate

123099638
1000104-212300.43: RNCC: 3 | RNVC: 2
1000104-212300.43: RNCC: 5 | RNVC: 9

24 Mar 1987

5340-12-342-1552
Angle Bracket

123421552
5610700040: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-191-0155
Electrical-Mechanical Equipment Post

121910155
CF 455 773: RNCC: 3 | RNVC: 2
CF 455 773: RNCC: 5 | RNVC: 2
CF455773: RNCC: 5 | RNVC: 2
CF455773: RNCC: 5 | RNVC: 9

6 Jan 1982

5340-12-332-8256
Mounting Bracket

123328256
81669125151: RNCC: 2 | RNVC: 2
81669125151: RNCC: 3 | RNVC: 2
81.66912.5151: RNCC: 5 | RNVC: 2

23 Sep 1993

5340-12-353-0570
Double Angle Bracket

123530570
54.0084.696.04: RNCC: 3 | RNVC: 2

24 Jan 2001

5340-12-366-9502
Door Handle

123669502
2016.1450: RNCC: 3 | RNVC: 2
2016.1450: RNCC: 5 | RNVC: 2

23 Jun 2005

5340-12-343-1178
Retaining Clip

123431178
5502-546: RNCC: 3 | RNVC: 2

2 May 1997

5340-12-347-8806
Access Cover

123478806
1052-0116: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-12-370-5702
Mechanical Stop

123705702
V6520-03011-103: RNCC: 2 | RNVC: 2
V6520-03011-103: RNCC: 3 | RNVC: 2

23 Nov 2006

5340-12-302-9342
Double Angle Bracket

123029342
42203791: RNCC: 3 | RNVC: 2
42203791KZ5511-27: RNCC: 5 | RNVC: 2

8 Feb 1985

Load More Results