What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 32 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 32 of 178

5340-12-352-3047
Mounting Bracket

123523047
556001: RNCC: 3 | RNVC: 9

7 Nov 2000

5340-12-335-2125
Door Button

123352125
602 0347: RNCC: 3 | RNVC: 2
6020347: RNCC: 5 | RNVC: 2

27 Jul 1994

5340-12-179-4391
Dust And Moisture Seal Protective Plug

121794391
113609163: RNCC: 3 | RNVC: 9

27 Jun 1979

5340-12-090-6503

5340-12-028-5924

5340-12-358-1762
Access Cover

123581762
2500261-060000.013.0: RNCC: 2 | RNVC: 2
2500261-060000.013.0: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-12-190-1809
Gummi- Riemen

121901809
2300013-4539.00: RNCC: 2 | RNVC: 2
2300013-4539.00: RNCC: 3 | RNVC: 2
2300013-4539.00: RNCC: 5 | RNVC: 2
2300013-4539.00: RNCC: 5 | RNVC: 2
2300013-4539.00: RNCC: 5 | RNVC: 2
2300013-4539.00: RNCC: 5 | RNVC: 9
2300013-4539-00: RNCC: 5 | RNVC: 9
82300-M300X20-NR-STZN-SW: RNCC: 6 | RNVC: 9

10 Nov 1981

5340-12-314-9808
Mending Plate

123149808
2.72-19170: RNCC: 3 | RNVC: 2
3/125-220: RNCC: 5 | RNVC: 2
3/125-220: RNCC: 5 | RNVC: 2

3 Sep 1988

5340-12-177-2807
Helical Compression Spring Seat

121772807
2300002-161000.003: RNCC: 2 | RNVC: 2
2300002-161000.003: RNCC: 3 | RNVC: 2
2300002-161000-003: RNCC: 5 | RNVC: 9
2300002-161000.003: RNCC: 5 | RNVC: 9

24 Jan 1979

5340-12-379-1504
Loop Clamp

123791504
JN1070P9-12: RNCC: 3 | RNVC: 2

29 Jun 2009

5340-12-700-8763
Loop Clamp

127008763
VG95211-ML-127008763: RNCC: 2 | RNVC: 2
1667S-50-15,5: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-330-6362
Webbing Strap

123306362
01155-2-SCHLAUFE -FE100-LE1400MM: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-1500-100: RNCC: 3 | RNVC: 2
6.373-465.0: RNCC: 5 | RNVC: 2
7300036-15: RNCC: 5 | RNVC: 9
DIN60060-2-25X100X1400-C3/SCHLAU: RNCC: 5 | RNVC: 9
79057/SCHLAUFE-1500-100: RNCC: 5 | RNVC: 9
6.373-465: RNCC: 5 | RNVC: 9

20 Jan 1993

5340-12-331-5541
Handle Grip

123315541
GN310-12-125-D: RNCC: 3 | RNVC: 2
GN310-12-125D: RNCC: 5 | RNVC: 2

19 May 1993

5340-12-316-6504
Mounting Bracket

123166504
G10-74-028-00-0: RNCC: 3 | RNVC: 2
G10-74-028-00-0: RNCC: 5 | RNVC: 9
G10-74-028-00-0: RNCC: 5 | RNVC: 9

31 Jan 1989

5340-12-359-8691
Mounting Plate

123598691
S58724-01-6-238: RNCC: 3 | RNVC: 2

17 Mar 2003

5340-12-301-2028
Angle Bracket

123012028
A-244829-757: RNCC: 3 | RNVC: 2
A244829-757: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-338-8706
Lock-Release Lever

123388706
2300348-183221.000.0: RNCC: 2 | RNVC: 2
2300348-183221.000.0: RNCC: 3 | RNVC: 2
1591484: RNCC: 5 | RNVC: 2

4 Sep 1995

5340-12-335-8466
Double Angle Bracket

123358466
58R059-414-1: RNCC: 3 | RNVC: 2

22 Sep 1994

5340-12-701-1650
Mounting Bracket

127011650
VG95211-ML-127011650: RNCC: 2 | RNVC: 2
5.12.0237.1000.36: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-5793
Mounting Bracket

127015793
VG95211-ML-127015793: RNCC: 2 | RNVC: 2
5.12.6409.0080.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-308-1435
Nonmetallic Bumper

123081435
59003701: RNCC: 3 | RNVC: 2
EE100/120KERN-B-QUALRTEIIKOMPLET: RNCC: 3 | RNVC: 2
027710: RNCC: 5 | RNVC: 2
EE 100/120 KERN B QUAL RTE 2: RNCC: 5 | RNVC: 2
MGW651012S4: RNCC: 5 | RNVC: 2

5 Sep 1986

5340-12-701-6830
Retaining Strap

127016830
VG95211-ML-127016830: RNCC: 2 | RNVC: 2
5.12.7217.1001.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5191
Mounting Bracket

127025191
VG95211-ML-127025191: RNCC: 2 | RNVC: 2
5.51.7001.0060.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-163-9957
Access Cover

121639957
V22.228.522000-9: RNCC: 3 | RNVC: 2
V2-228-522000-9: RNCC: 5 | RNVC: 2
V2.228.522000-9: RNCC: 5 | RNVC: 2
V22-228-522000-9EZ4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-354-2714
Access Cover

123542714
7636 002 203: RNCC: 3 | RNVC: 2
81.47302-0012: RNCC: 5 | RNVC: 2
81473020012: RNCC: 5 | RNVC: 2
0740910: RNCC: 5 | RNVC: 2
17226176-0: RNCC: 5 | RNVC: 9
5001843939: RNCC: 5 | RNVC: 9

25 Jun 2001

5340-12-701-3885
Loop Clamp

127013885
VG95211-ML-127013885: RNCC: 2 | RNVC: 2
5.12.5305.3712.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-174-2493
Retaining Strap

121742493
23223-060000.07.0: RNCC: 2 | RNVC: 2
23223-060000-07-0: RNCC: 5 | RNVC: 2
23223-060000.07.0: RNCC: 5 | RNVC: 2
23223-060000-07-0: RNCC: 5 | RNVC: 9

19 Jun 1978

5340-12-365-3737
Angle Bracket

123653737
2500267-194700.001.0: RNCC: 2 | RNVC: 2
2500267-194700.001.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-702-5229
Angle Bracket

127025229
VG95211-ML-127025229: RNCC: 2 | RNVC: 2
5.51.7010.0130.25: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-360-9344
Mounting Bracket

123609344
13157201: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-164-7727
Lock-Release Lever

121647727
0251605501: RNCC: 3 | RNVC: 2
4M16X55: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-195-4172
Dust And Moisture Seal Protective Cap

121954172
1530505000: RNCC: 3 | RNVC: 2
0009625014: RNCC: 5 | RNVC: 2

21 Feb 1983

5340-12-372-6160
Loop Clamp

123726160
450 7235-814: RNCC: 3 | RNVC: 2
450 7235-814: RNCC: 5 | RNVC: 2

6 Aug 2007

5340-12-348-8596
Double Angle Bracket

123488596
3660721140: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-12-334-8492
Clamping Catch

123348492
52.3109.825.00: RNCC: 2 | RNVC: 2
52.3109.895.00: RNCC: 3 | RNVC: 2

28 Jun 1994

5340-12-173-8553
Section Block Clamp

121738553
PAN4272-6: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-092-3834

5340-12-305-5631
Angle Bracket

123055631
501693: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-196-9473
Mending Plate

121969473
66.3851.105.04-A001: RNCC: 3 | RNVC: 2
170652: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-318-9995
Angle Bracket

123189995
6100125-7410: RNCC: 2 | RNVC: 2
6100125-7410: RNCC: 3 | RNVC: 2

30 Aug 1989

5340-12-334-9364
Mending Plate

123349364
52.0099.790.06: RNCC: 2 | RNVC: 2
52.0099.790.06: RNCC: 3 | RNVC: 2

5 Jul 1994

5340-12-301-2743
Double Angle Bracket

123012743
2300106-260811.04: RNCC: 2 | RNVC: 2
2300106-260811.04: RNCC: 3 | RNVC: 2
2300106-260811.04: RNCC: 5 | RNVC: 9
2300106-260811.04: RNCC: 5 | RNVC: 9

3 Oct 1984

5340-12-380-2190
Dust And Moisture Seal Protective Cap-Plug

123802190
3133536: RNCC: 3 | RNVC: 2

7 Oct 2009

5340-12-358-8896
Angle Bracket

123588896
4010182540: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-132-8184

5340-12-184-1501

5340-12-159-5963
Spring Tension Clip

121595963
32-5080-045: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-163-1202
Bridge Clamp

121631202
03112200: RNCC: 3 | RNVC: 2
03112200-164: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-323-9875
Butt Hinge Leaf

123239875
22-310-JL-025: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-12-387-6282
Mounting Bracket

123876282
9999261-752100.000.0: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-12-337-4652
Retaining Strap

123374652
0376 4958: RNCC: 2 | RNVC: 2
0376 4958: RNCC: 3 | RNVC: 2
376 4958 EE 3480-44: RNCC: 5 | RNVC: 2
0376.4958UE3480-44: RNCC: 5 | RNVC: 2

8 Mar 1995

5340-12-328-1615
Runner

123281615
2300232-184900.007.0: RNCC: 2 | RNVC: 2
2300232-184900.007.0: RNCC: 3 | RNVC: 2

14 Apr 1992

5340-12-345-1350
Mounting Plate

123451350
VD-41-10-00632-108: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-12-371-8748
Double Angle Bracket

123718748
1506563: RNCC: 3 | RNVC: 2
548-120700.02.0: RNCC: 5 | RNVC: 2
15004539: RNCC: 5 | RNVC: 2

24 May 2007

5340-12-382-0411
Dust And Moisture Seal Protective Cap

123820411
2522 4441-200: RNCC: 3 | RNVC: 2

30 Apr 2010

5340-12-701-9080
Antipilferage Seal Locking Wire

127019080
OST1 10064-71: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2486
Mounting Bracket

127012486
VG95211-ML-127012486: RNCC: 2 | RNVC: 2
5.12.3600.8170.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-190-7171
Metal Runner

121907171
NO PRIMARY REF 12-190-7171: RNCC: 3 | RNVC: 2
5717 137159: RNCC: 5 | RNVC: 9
5717137159: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-317-4905
Mounting Bracket

123174905
1000192-02 0 31000.04: RNCC: 2 | RNVC: 2
1000192-02 0 31000.04: RNCC: 3 | RNVC: 2
1000192-02 0 31000.04: RNCC: 5 | RNVC: 9

13 Apr 1989

5340-12-189-1848
Mounting Bracket

121891848
SP05623: RNCC: 3 | RNVC: 2
20.4.459.6002: RNCC: 5 | RNVC: 9
2044596002: RNCC: 5 | RNVC: 9

9 Sep 1981

5340-12-193-2937
Retaining Strap

121932937
4609955510: RNCC: 3 | RNVC: 2
721 1 99 054 1: RNCC: 5 | RNVC: 9

8 Jul 1982

5340-12-338-6480
Dust And Moisture Seal Protective Plug

123386480
60209301/91: RNCC: 3 | RNVC: 2
60209301/91: RNCC: 5 | RNVC: 2

9 Aug 1995

5340-12-313-6050
Mending Plate

123136050
2300013-6508.03: RNCC: 2 | RNVC: 2
2300013-6508.03: RNCC: 3 | RNVC: 2
2300013-6508.03: RNCC: 5 | RNVC: 9

20 Apr 1988

5340-12-177-6154
Retaining Strap

121776154
2300002-151166.003: RNCC: 2 | RNVC: 2
2300002-151166.003: RNCC: 3 | RNVC: 2
2300002-151166-003: RNCC: 5 | RNVC: 9
2300002-151166.003: RNCC: 5 | RNVC: 9

9 Feb 1979

5340-12-362-0087
Loop Clamp

123620087
DIN3016-1-E1-15X15-W5-NBR: RNCC: 2 | RNVC: 2

16 Dec 2003

5340-12-305-4428
Angle Bracket

123054428
4900059-323206.100.0: RNCC: 3 | RNVC: 2

7 Nov 1985

5340-12-303-2750
Rod End Connector

123032750
P-886658-001: RNCC: 3 | RNVC: 2
P886658-001: RNCC: 5 | RNVC: 2

13 Mar 1985

5340-12-143-0451
Retaining Strap

121430451
2360-060000.05.0: RNCC: 2 | RNVC: 2
2360-060000-05-0: RNCC: 5 | RNVC: 2
2360-060000.05.0: RNCC: 5 | RNVC: 2
2360-060000-05-0: RNCC: 5 | RNVC: 2
2360-060000.05.0: RNCC: 5 | RNVC: 2
2360-060000-05-0: RNCC: 5 | RNVC: 9
2360-060000.05.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-332-8439
Sealing Plug Assembly

123328439
15-03-00: RNCC: 3 | RNVC: 2

27 Sep 1993

5340-12-701-3871
Rod End Connector

127013871
VG95211-ML-127013871: RNCC: 2 | RNVC: 2
5.12.5305.3620.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-328-9607
Mounting Bracket

123289607
C42080-A26-C112: RNCC: 2 | RNVC: 2
C42080-A26-C112: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-161-1713
Rod End Connector

121611713
160-741009-03: RNCC: 3 | RNVC: 2
160-741009-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-310-4691
Retaining Strap

123104691
5800748-11.121: RNCC: 3 | RNVC: 2

25 May 1987

5340-12-318-8582
Rod End Clevis

123188582
704-123000-907-0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-701-6177
Mounting Bracket

127016177
VG95211-ML-127016177: RNCC: 2 | RNVC: 2
5.12.7010.1800.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-125-0317
Ball Socket Seat

121250317
DIN71805-B8: RNCC: 2 | RNVC: 2
DIN71805-B8: RNCC: 3 | RNVC: 2
071805008204: RNCC: 5 | RNVC: 2
071805008207: RNCC: 5 | RNVC: 2
B8DIN71805: RNCC: 5 | RNVC: 2
071805008200: RNCC: 5 | RNVC: 2
7180500101: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-172-7646
Electrical-Mechanical Equipment Post

121727646
805-12-06-02-01: RNCC: 3 | RNVC: 2

20 Feb 1978

5340-12-340-9089
Nonmetallic Bumper

123409089
160-62057-24: RNCC: 3 | RNVC: 2
15160-62057.24: RNCC: 5 | RNVC: 2
160-62057-24: RNCC: 5 | RNVC: 9

2 Jul 1996

5340-12-369-5538
Extension Drawer Slide

123695538
5803912-301100.02: RNCC: 2 | RNVC: 2
5803912-301100.02: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-12-146-4200
Retaining Strap

121464200
116-000-713: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-189-2628
Lock-Release Lever

121892628
A10-24.972.57.0: RNCC: 3 | RNVC: 2
A10-24-972-57-0: RNCC: 5 | RNVC: 2
A10-24-972-57-0: RNCC: 5 | RNVC: 9
85-691-4679: RNCC: 6 | RNVC: 9

15 Sep 1981

5340-12-315-8868
Nonmetallic Bumper

123158868
4604281585: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-12-020-5522

5340-12-365-8615
Dust And Moisture Seal Protective Plug

123658615
350I56: RNCC: 3 | RNVC: 2
GPN350I56: RNCC: 5 | RNVC: 2

14 Feb 2005

5340-12-162-1994
Retaining Strap

121621994
2211628701: RNCC: 3 | RNVC: 2
22116 28701: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-349-9081
Double Angle Bracket

123499081
A1Z10283187: RNCC: 2 | RNVC: 2
A1Z10283187: RNCC: 3 | RNVC: 2
20360768: RNCC: 5 | RNVC: 2

24 Jan 2000

5340-12-197-0754
Door Hook

121970754
4357407016: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-12-300-6752
Mending Plate

123006752
4356167811: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-092-3282

5340-12-314-0983
Spring Tension Clip

123140983
13031: RNCC: 3 | RNVC: 2
15132101: RNCC: 5 | RNVC: 2
15132101: RNCC: 5 | RNVC: 2
15132101: RNCC: 5 | RNVC: 2

7 Jun 1988

5340-12-360-0745
Butt Hinge

123600745
9417200137: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-12-309-4082
Angle Bracket

123094082
WW 203 519: RNCC: 2 | RNVC: 2
WW 203 519: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-388-1228
Access Cover

123881228
5840982343: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-12-392-4128
Dust And Moisture Seal Protective Cap

123924128
I003593: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-12-385-4990
Door Button

123854990
X00E50204720: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-12-043-8961

5340-12-044-1266

5340-12-317-2928
Resilient Mount

123172928
2-22-000032-02: RNCC: 3 | RNVC: 9
0744093: RNCC: 5 | RNVC: 2
0744-093: RNCC: 5 | RNVC: 2
8450103: RNCC: 5 | RNVC: 2

28 Mar 1989

5340-12-171-4579
Support Hook

121714579
306-124-81-113: RNCC: 3 | RNVC: 2
81.67112-5002: RNCC: 5 | RNVC: 2
0595202: RNCC: 5 | RNVC: 2
595202: RNCC: 5 | RNVC: 2
81671125002: RNCC: 5 | RNVC: 2
23231-200716-000-0: RNCC: 5 | RNVC: 9
23231-200716.000.0: RNCC: 5 | RNVC: 9

13 Oct 1977

5340-12-304-4518
Sealing Plug Assembly

123044518
MB600-100: RNCC: 3 | RNVC: 2
ND7654: RNCC: 5 | RNVC: 2

18 Jul 1985

5340-12-177-4130
Retaining Strap

121774130
2300002-224100.005: RNCC: 2 | RNVC: 2
2300002-224100.005: RNCC: 3 | RNVC: 2
2300002-224100-005: RNCC: 5 | RNVC: 9
2300002-224100.005: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-369-5377
Block Clamp

123695377
1101 0 2800: RNCC: 3 | RNVC: 2
1101-0-2800: RNCC: 5 | RNVC: 2

20 Jul 2006

5340-12-318-8425
Nonmetallic Bumper

123188425
2654-331500.01: RNCC: 2 | RNVC: 2
2654-331500.01: RNCC: 3 | RNVC: 2
679-01000100.01: RNCC: 5 | RNVC: 9
2654-331 500.01: RNCC: 5 | RNVC: 9
679-01000100.01: RNCC: 5 | RNVC: 9

22 Aug 1989

5340-12-339-7407
Seal Retaining Plate

123397407
2500255-000000.007.0: RNCC: 2 | RNVC: 2
2500255-000000.007.0: RNCC: 3 | RNVC: 2

9 Jan 1996

5340-12-701-6438
Angle Bracket

127016438
VG95211-ML-127016438: RNCC: 2 | RNVC: 2
5.12.7204.0340.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-9200
Dust And Moisture Seal Protective Cap

127029200
VG95211-ML-127029200: RNCC: 2 | RNVC: 2
5.12.5101.8071.98: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-158-4155
Screw Hook

121584155
9110-1100-05-0: RNCC: 3 | RNVC: 2
711-101-3: RNCC: 5 | RNVC: 9
9110-1100-05-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-381-7885
Support Hook

123817885
1000286-368030.001.0: RNCC: 2 | RNVC: 2
1000286-368030.001.0: RNCC: 3 | RNVC: 2

31 Mar 2010

5340-12-358-5287
Mounting Bracket

123585287
3520921240: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-353-9437
Spring Loaded Cylinder Fastener

123539437
FG1210-V2A: RNCC: 3 | RNVC: 2
FG 1210 , 1.4301: RNCC: 5 | RNVC: 2

21 May 2001

5340-12-320-2638
Elastic Strap

123202638
200.0506: RNCC: 3 | RNVC: 2

22 Dec 1989

5340-12-383-9796
Mounting Bracket

123839796
JS E0040202: RNCC: 3 | RNVC: 2
A430409900156: RNCC: 5 | RNVC: 2

5 Jan 2011

5340-12-043-9465

5340-12-193-8181
Lock-Release Lever

121938181
C22136-A1000-C830: RNCC: 3 | RNVC: 2
C22136A1000C830: RNCC: 5 | RNVC: 2

2 Sep 1982

5340-12-305-4607
Rigid Caster

123054607
305535: RNCC: 3 | RNVC: 2
658 11 701 05 3: RNCC: 5 | RNVC: 2
658-11-701-05-3: RNCC: 5 | RNVC: 2
32103: RNCC: 5 | RNVC: 2
85-692-1455: RNCC: 6 | RNVC: 9

8 Nov 1985

5340-12-317-3183
Mounting Plate

123173183
4900064-4111.024: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-184-9313
Compression Cup

121849313
3800029-20-01: RNCC: 2 | RNVC: 2

28 Aug 1980

5340-12-163-0055
Retaining Strap

121630055
VG95933AR-18-W1-BK: RNCC: 2 | RNVC: 2
1/1D18MMN325: RNCC: 3 | RNVC: 2
1-1D18MMN325: RNCC: 5 | RNVC: 2
MMN325-1-1D9-18: RNCC: 5 | RNVC: 2
700325018100: RNCC: 5 | RNVC: 2
MMN325-1-1D18: RNCC: 5 | RNVC: 2
MMN325-1-1D9-18: RNCC: 5 | RNVC: 2
MMN325-1-1D18: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-308-0345
Electrical-Mechanical Equipment Post

123080345
4021.2705.3: RNCC: 3 | RNVC: 2

22 Aug 1986

5340-12-043-2660

5340-12-170-6795
Expansion Plug

121706795
DIN443-B10-ST-PHR: RNCC: 2 | RNVC: 2
B10DIN443PHR: RNCC: 5 | RNVC: 2
DIN443-B10: RNCC: 5 | RNVC: 9

27 Jul 1977

5340-12-375-7720
Hand Crank

123757720
03-138913/00: RNCC: 3 | RNVC: 2

3 Jul 2008

5340-12-134-6389
Door Handle

121346389
AVG75111: RNCC: 2 | RNVC: 2
147: RNCC: 3 | RNVC: 2
613059: RNCC: 5 | RNVC: 2
G613059: RNCC: 5 | RNVC: 2
AVDA75111: RNCC: 5 | RNVC: 2
2512-36-24: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-324-5222
Electrical-Mechanical Equipment Post

123245222
VG95148C5,5XM3X7-NRST: RNCC: 2 | RNVC: 2
VG95148C5,5XM3X7-NRST: RNCC: 3 | RNVC: 2
DN 04.102: RNCC: 3 | RNVC: 2

26 Feb 1991

5340-12-152-8234
Nonmetallic Bumper

121528234
23307-261350.03.0: RNCC: 2 | RNVC: 2
23307-261350.03.0: RNCC: 3 | RNVC: 2
23307-261350-03-0: RNCC: 5 | RNVC: 2
23307-261350-03-0: RNCC: 5 | RNVC: 9
23307-261350.03.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-0768
Shimmy Damper

123220768
16-4-243-200-A12-B12-160: RNCC: 3 | RNVC: 2

20 Jul 1990

5340-12-317-3205
Mounting Bracket

123173205
4900064-41211.010: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-362-1077
Mounting Bracket

123621077
V6530-08007-081: RNCC: 3 | RNVC: 2
V6530-08007-081: RNCC: 5 | RNVC: 9

9 Jan 2004

5340-12-195-5110
Flush Lock

121955110
NO PRIMARY REF 12-195-5110: RNCC: 3 | RNVC: 2
600.02-00.28: RNCC: 5 | RNVC: 9
M0301: RNCC: 5 | RNVC: 9

7 Mar 1983

5340-12-195-5506
Electrical-Mechanical Equipment Post

121955506
VG95148B5,5XM3X15-1.0711A2P: RNCC: 2 | RNVC: 2
VG95148B5,5XM3X15-1.0711A2P: RNCC: 3 | RNVC: 2
M3X15STVZK: RNCC: 3 | RNVC: 2
808400.7: RNCC: 5 | RNVC: 2
VG95148B5,5XM3X15-1.0711: RNCC: 5 | RNVC: 2

10 Mar 1983

5340-12-391-0509
Dust And Moisture Seal Protective Cap

123910509
PTG-X-900-034: RNCC: 3 | RNVC: 2
PTG-X-900-034: RNCC: 5 | RNVC: 2

18 Jan 2013

5340-12-700-8396
Angle Bracket

127008396
VG95211-ML-127008396: RNCC: 2 | RNVC: 2
1-8 OST1 10221-71: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-393-7984
Pipe Covering Protection Saddle

123937984
1-4031-235-00: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-12-343-8473
Mechanic Equipment Hardware Kit

123438473
2500238-062400.000.0: RNCC: 2 | RNVC: 2
2500238-062400.000.0: RNCC: 3 | RNVC: 2

5 Aug 1997

5340-12-702-4558
Mounting Bracket

127024558
VG95211-ML-127024558: RNCC: 2 | RNVC: 2
5.51.0602.1840.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-392-9881
Angle Bracket

123929881
4000005318: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-12-379-3898
Access Cover

123793898
3131778: RNCC: 3 | RNVC: 2
5001874226: RNCC: 5 | RNVC: 2

20 Jul 2009

5340-12-379-6145
Mortise Lock Set

123796145
520510: RNCC: 3 | RNVC: 2

17 Aug 2009

5340-12-350-0077
Catch Strike

123500077
88626805005: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-313-0525
Handle Grip

123130525
2DE025: RNCC: 3 | RNVC: 2

1 Mar 1988

5340-12-368-2259
Swivel Caster

123682259
L-ALTH 80K: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-12-315-7226
Angle Bracket

123157226
4255412740: RNCC: 3 | RNVC: 2
425 541 27 40: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-316-5391
Nonmetallic Solid Wheel

123165391
2300034-360200.01: RNCC: 2 | RNVC: 2
2300034-360200.01: RNCC: 5 | RNVC: 9
2300034-360200.01: RNCC: 5 | RNVC: 9

24 Jan 1989

5340-12-196-2554
Nonmetallic Bumper

121962554
5206: RNCC: 3 | RNVC: 2
50225600: RNCC: 5 | RNVC: 2

20 Jun 1983

5340-12-366-0009
Retaining Strap

123660009
0004321321: RNCC: 3 | RNVC: 2

25 Feb 2005

5340-12-367-1131
Retaining Band

123671131
13763: RNCC: 3 | RNVC: 2

11 Jul 2005

5340-12-198-3331
Mending Plate

121983331
27 0318 407: RNCC: 2 | RNVC: 2
9837735: RNCC: 3 | RNVC: 9
27 0318 407: RNCC: 5 | RNVC: 2
27 0318 407: RNCC: 5 | RNVC: 9
270318407: RNCC: 5 | RNVC: 9

16 Jan 1984

5340-12-164-4670
Loop Clamp

121644670
LN9491BM22: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-356-7505
Dust And Moisture Seal Protective Cap

123567505
98A49107504001: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-346-1571
Friction Catch Stud

123461571
52.3208.271.03: RNCC: 3 | RNVC: 2
52.3208.271.03LV: RNCC: 5 | RNVC: 2

19 Jun 1998

5340-12-357-0290
Dust And Moisture Seal Protective Plug

123570290
13,3MMN328: RNCC: 3 | RNVC: 2
700328000211: RNCC: 5 | RNVC: 9

25 Apr 2002

5340-12-196-2539
Mending Plate

121962539
03736000: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-184-7222
Resilient Mount

121847222
CF 205 043 DR: RNCC: 3 | RNVC: 2
CF 205 043 DR: RNCC: 5 | RNVC: 2
CF 205 043 DR: RNCC: 5 | RNVC: 2
CF205043CR: RNCC: 5 | RNVC: 2
CF205043DR: RNCC: 5 | RNVC: 2
CF205043CR: RNCC: 5 | RNVC: 2
CF205043DR: RNCC: 5 | RNVC: 2

14 Aug 1980

5340-12-171-9030
Quick Release Plunger

121719030
9617023002: RNCC: 3 | RNVC: 2
81.90441-0111: RNCC: 5 | RNVC: 2
81904410111: RNCC: 5 | RNVC: 2
5000609245: RNCC: 5 | RNVC: 2
5000609245: RNCC: 5 | RNVC: 9

25 Nov 1977

5340-12-334-1268
Double Angle Bracket

123341268
2300122-142120.100.0: RNCC: 2 | RNVC: 2
2300122-142120.100.0: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-12-354-5967
Nonmetallic Bumper

123545967
6.339-099.0: RNCC: 3 | RNVC: 2

7 Aug 2001

5340-12-327-5105
Webbing Strap

123275105
5802291-20650: RNCC: 2 | RNVC: 2
5802291-20650: RNCC: 3 | RNVC: 2
4840541-20650: RNCC: 5 | RNVC: 2

29 Jan 1992

5340-12-348-6266
Access Cover

123486266
7068-44100-006-2: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-12-148-6308
Manual Control Handle

121486308
270311: RNCC: 3 | RNVC: 2
3922-0017-589027: RNCC: 3 | RNVC: 2
A17NAN2257: RNCC: 5 | RNVC: 2
0-60124104: RNCC: 5 | RNVC: 2
0009972737: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-171-3328
Angle Bracket

121713328
81517100559: RNCC: 3 | RNVC: 2
23250-120614-002-0: RNCC: 5 | RNVC: 9
23250-120614.002.0: RNCC: 5 | RNVC: 9

30 Sep 1977

5340-12-385-4943
Manual Control Handle

123854943
2500298-191720.002.0: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-12-301-1241
Angle Bracket

123011241
P-243842-401: RNCC: 3 | RNVC: 2
P243842-401: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-390-0933
Mounting Bracket

123900933
2300559-184412.000.0: RNCC: 2 | RNVC: 2
2300559-184412.000.0: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-12-388-1654
Loop Clamp

123881654
DIN3016-1-D1-14X15-W5-NBR: RNCC: 2 | RNVC: 2

29 Feb 2012

5340-12-354-8638
Access Cover

123548638
1954333: RNCC: 3 | RNVC: 2
1954333-3: RNCC: 5 | RNVC: 9
1954333/3: RNCC: 5 | RNVC: 9

30 Aug 2001

5340-12-316-1196
Mending Plate

123161196
P-M41913-016: RNCC: 3 | RNVC: 2
PM-41913-016: RNCC: 5 | RNVC: 2
PM41913-016: RNCC: 5 | RNVC: 2

23 Dec 1988

5340-12-347-0291
Spacing Threaded Standoff

123470291
54.0067.659.01: RNCC: 3 | RNVC: 2

14 Oct 1998

5340-12-333-6402
Spring Tension Clip

123336402
1H0823717: RNCC: 3 | RNVC: 9

17 Jan 1994

5340-12-302-0831
Dust And Moisture Seal Protective Cap

123020831
3819970025: RNCC: 3 | RNVC: 2

30 Nov 1984

5340-12-318-5841
Nonmetallic Bumper

123185841
4357437741: RNCC: 3 | RNVC: 2
4357437741: RNCC: 3 | RNVC: 9

31 Jul 1989

5340-12-391-1417
Cap Holder

123911417
351211221111: RNCC: 3 | RNVC: 2

20 Feb 2013

5340-12-184-2346
Door Handle

121842346
211843642A: RNCC: 3 | RNVC: 2

8 Jul 1980

5340-12-343-9308
Mending Plate

123439308
3512 120 0154: RNCC: 3 | RNVC: 2
351212001541: RNCC: 5 | RNVC: 2

14 Aug 1997

5340-12-358-4475
Access Cover

123584475
3892611733: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-330-2104
Electrical-Mechanical Equipment Post

123302104
10603401: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-12-308-1397
Electrical-Mechanical Equipment Post

123081397
2859060693: RNCC: 3 | RNVC: 2

5 Sep 1986

5340-12-308-1398
Electrical-Mechanical Equipment Post

123081398
2859060703: RNCC: 3 | RNVC: 2

5 Sep 1986

5340-12-309-1052
Access Cover

123091052
54.0028.573.00: RNCC: 3 | RNVC: 2

15 Dec 1986

5340-12-380-0385
Rim Lock

123800385
80000665: RNCC: 3 | RNVC: 2

22 Sep 2009

5340-12-043-0183

5340-12-302-0823
Dust And Moisture Seal Protective Plug

123020823
3819971186: RNCC: 3 | RNVC: 2

30 Nov 1984

5340-12-364-4444
Mounting Bracket

123644444
2300397-189000.007.0: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-364-4442
Access Door Hinge

123644442
2300397-189000.005.0: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-358-5890
Angle Bracket

123585890
J92228103-003: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-152-2711
Retaining Clip

121522711
C22326-A7-C64: RNCC: 3 | RNVC: 2
C22326A7C64: RNCC: 5 | RNVC: 2
TEMPF11T54: RNCC: 5 | RNVC: 9
TFS70-01781: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-174-6328
Loop Clamp

121746328
V23421A3000: RNCC: 3 | RNVC: 2
5800583-097960-100: RNCC: 5 | RNVC: 2
5800583-097960.100: RNCC: 5 | RNVC: 2
V23421A3003: RNCC: 5 | RNVC: 9

17 Jul 1978

5340-12-316-2234
Pipe Bracket

123162234
1816306108-W5: RNCC: 3 | RNVC: 2
67210720: RNCC: 5 | RNVC: 2
1816306108W5: RNCC: 5 | RNVC: 2

2 Jan 1989

5340-12-352-9443
Latch Bar

123529443
5400049-128300.02: RNCC: 3 | RNVC: 2

11 Jan 2001

5340-12-331-3730
Mending Plate

123313730
200441: RNCC: 3 | RNVC: 2
24K03-0084-00.015: RNCC: 5 | RNVC: 2

29 Apr 1993

5340-12-352-4315
Retaining Bail

123524315
VG95211-ML-123524315: RNCC: 2 | RNVC: 2
P70157102200: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-332-5478
Nonmetallic Bumper

123325478
1361235-16038-02: RNCC: 3 | RNVC: 2
1361235-16038-02: RNCC: 5 | RNVC: 2
1361235-16038-02 HS36 SCHWARZ: RNCC: 5 | RNVC: 2

19 Aug 1993

5340-12-142-5795
Resilient Mount

121425795
500028-M6X10-M6X15.NR40.ST: RNCC: 3 | RNVC: 2
8798990022: RNCC: 3 | RNVC: 9
GP2D1Z: RNCC: 5 | RNVC: 9
VG95363A25X25-M6X10-M6X15-NR40ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-6572
Loop Clamp

127016572
VG95211-ML-127016572: RNCC: 2 | RNVC: 2
5.12.7208.8200.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-313-1689
Mending Plate

123131689
25704-197000.01.0: RNCC: 2 | RNVC: 2
25704-197000.01.0: RNCC: 3 | RNVC: 2

9 Mar 1988

5340-12-319-2698
Access Cover

123192698
1840475-0000.02: RNCC: 3 | RNVC: 2

18 Sep 1989

5340-12-702-6312
Mounting Bracket

127026312
VG95211-ML-127026312: RNCC: 2 | RNVC: 2
84 OST1 12560-76: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-9387
Pawl Fastener

127029387
VG95211-ML-127029387: RNCC: 2 | RNVC: 2
P196.000: RNCC: 3 | RNVC: 2
0500891986899: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-393-8399
Dust And Moisture Seal Protective Cap

123938399
M2917920521600: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-12-180-4697
Retaining Strap

121804697
3818110178: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-310-4200
Clamping Catch

123104200
WN 1900 DB: RNCC: 3 | RNVC: 2
0008400184: RNCC: 5 | RNVC: 2

20 May 1987

5340-12-364-5155
Flush Bolt

123645155
622628: RNCC: 3 | RNVC: 2

6 Oct 2004

5340-12-351-5808
Dust And Moisture Seal Boot

123515808
8591840002: RNCC: 3 | RNVC: 2

4 Aug 2000

5340-12-325-6105
Catch Strike

123256105
211.03.04.012.3: RNCC: 3 | RNVC: 2
211.03.04.012: RNCC: 5 | RNVC: 2
211.03.04.012: RNCC: 5 | RNVC: 2
211.03.04.012.3: RNCC: 5 | RNVC: 2

21 Jun 1991

5340-12-355-4834
Mounting Plate

123554834
9153.101.4: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-171-9211
Mending Plate

121719211
2360-020000.20.0: RNCC: 2 | RNVC: 2
4913235221: RNCC: 3 | RNVC: 2
2360-020000.20.0: RNCC: 5 | RNVC: 2
2360-020000-20-0: RNCC: 5 | RNVC: 2
2360-020000.20.0: RNCC: 5 | RNVC: 2
2360-020000-20-0: RNCC: 5 | RNVC: 9
2360-020000.20.0: RNCC: 5 | RNVC: 9

29 Nov 1977

5340-12-364-1632
Locking Stay

123641632
73735/14: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-12-143-2044
Resilient Mount

121432044
DIN95363-A25X20-CR70ST: RNCC: 2 | RNVC: 2
81100-25X20-M6X20.CR70.ST: RNCC: 5 | RNVC: 2
1.25.20.1.70CR/ST: RNCC: 5 | RNVC: 2
1.25.20.1.70CRST: RNCC: 5 | RNVC: 2
811.000.025.020.06X20.CR70.ST: RNCC: 5 | RNVC: 2
8798990020: RNCC: 5 | RNVC: 9
VG95363-A25X20-CR70ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-185-9285
Nut And Bolt Locking Plate

121859285
5564016/4: RNCC: 3 | RNVC: 2
5564016-4: RNCC: 5 | RNVC: 2

8 Nov 1980

5340-12-377-8421
Section Block Clamp

123778421
J49130003-003: RNCC: 3 | RNVC: 2

16 Feb 2009

5340-12-375-4742
Mounting Plate

123754742
58R153-2631-2: RNCC: 2 | RNVC: 2
58R153-2631-2: RNCC: 3 | RNVC: 2

5 Jun 2008

5340-12-129-5733
Snap Hook

121295733
DIN5299-C120NI: RNCC: 2 | RNVC: 2
DIN5299-C120-VERNICKELT: RNCC: 3 | RNVC: 2
245-120X11 VERNICKELT: RNCC: 3 | RNVC: 9
C120DIN5299GALNI5: RNCC: 5 | RNVC: 2
C120DIN5299VERNICKELT: RNCC: 5 | RNVC: 2
C120DIN5299VERNI: RNCC: 5 | RNVC: 2
245-120X11VERNICKELT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-383-8073
Access Cover

123838073
601241-206500.02: RNCC: 2 | RNVC: 2
601241-206500.02: RNCC: 3 | RNVC: 2

9 Dec 2010

5340-12-174-2928
Retaining Strap

121742928
23223-060000.16.0: RNCC: 2 | RNVC: 2
23223-060000-16-0: RNCC: 5 | RNVC: 2
23223-060000.16.0: RNCC: 5 | RNVC: 2
23223-060000-16-0: RNCC: 5 | RNVC: 9

21 Jun 1978

5340-12-326-8893
Access Cover

123268893
917953-4000: RNCC: 3 | RNVC: 2
917953-4000: RNCC: 5 | RNVC: 2

6 Nov 1991

5340-12-171-8819
Mending Plate

121718819
490126-34360-01: RNCC: 3 | RNVC: 2

23 Nov 1977

5340-12-306-0537
Nonmetallic Bumper

123060537
NO PRIMARY REF 12-306-0537: RNCC: 3 | RNVC: 2
457: RNCC: 5 | RNVC: 9
15-2-6727-14: RNCC: 5 | RNVC: 9

23 Jan 1986

5340-12-344-3740
Mounting Bracket

123443740
A-296771-019: RNCC: 3 | RNVC: 2
A296771-019: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-702-2009
Blank Panel

127022009
VG95211-ML-127022009: RNCC: 2 | RNVC: 2
30.7211.1031.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-313-0172
Double Angle Bracket

123130172
P-086147-138: RNCC: 3 | RNVC: 2
P086147-138: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-357-6528
Mechanical Stop

123576528
9997001-992550.000.0: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-12-321-8929
Loop Clamp

123218929
DIN3015-LA-K-4G-30-PA-W1: RNCC: 2 | RNVC: 2
DIN3015-LA-K-4G-30-PA6-W1: RNCC: 2 | RNVC: 2
HRGL4A30PA STMBL: RNCC: 3 | RNVC: 2
SP430PAH-DP-AS: RNCC: 3 | RNVC: 2
RANG3-430: RNCC: 3 | RNVC: 2
RANG3-430: RNCC: 5 | RNVC: 2
DIN3015-LA4G-30PA-W1-K: RNCC: 5 | RNVC: 2
VG95932A4-30-PA-W1: RNCC: 5 | RNVC: 9

6 Jul 1990

5340-12-337-1166
Angle Bracket

123371166
2300122-187000.005.0: RNCC: 2 | RNVC: 2
2300122-187000.005.0: RNCC: 3 | RNVC: 2
2300122-187000.005.0: RNCC: 5 | RNVC: 2

19 Jan 1995

5340-12-152-2998
Angle Bracket

121522998
5800400-0070.006: RNCC: 3 | RNVC: 2
6P358-70-6: RNCC: 5 | RNVC: 2
5800400-0070-006: RNCC: 5 | RNVC: 2
5800400-0070-006: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-303-8120
Friction Catch Stud

123038120
421-112040.05.3: RNCC: 3 | RNVC: 2

6 May 1985

5340-12-347-5954
Bow Handle

123475954
VS/9-00182: RNCC: 3 | RNVC: 2

12 Jan 1999

5340-12-188-7629
Retaining Strap

121887629
DIN1592-7ZN: RNCC: 2 | RNVC: 2
DIN1592-7ZN: RNCC: 3 | RNVC: 2
DIN1592-7-VERZINKT: RNCC: 3 | RNVC: 2
06.67010-2101: RNCC: 5 | RNVC: 2
06670102101: RNCC: 5 | RNVC: 2
7DIN1592-A4C: RNCC: 5 | RNVC: 2
7DIN1592VERZINKT: RNCC: 5 | RNVC: 2
DIN1592-7-VERZINKT: RNCC: 5 | RNVC: 2
DIN1592-7ZN: RNCC: 5 | RNVC: 2

28 Jul 1981

5340-12-156-8896
Cremone Bolt

121568896
NO PRIMARY REF 12-156-8896: RNCC: 3 | RNVC: 2
1-6899-15-2-6727-5ITEMA: RNCC: 5 | RNVC: 9
15-2-6727-5A: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-700-3415
Access Cover

127003415
20-29-09-4: RNCC: 2 | RNVC: 2
51-170472064: RNCC: 2 | RNVC: 2

28 Jan 1992

5340-12-377-5480
Strap Fastener Loop

123775480
4100008-990135.000: RNCC: 3 | RNVC: 2

23 Jan 2009

5340-12-172-2169
Wasser Behaelter

121722169
3142: RNCC: 3 | RNVC: 2

3 Jan 1978

5340-12-182-6892
Dust And Moisture Seal Protective Cap

121826892
200Z6X16: RNCC: 3 | RNVC: 2
GPN200Z6X16: RNCC: 5 | RNVC: 2
200061600: RNCC: 5 | RNVC: 9
GPN200,Z6X16: RNCC: 5 | RNVC: 9
Z6X16: RNCC: 5 | RNVC: 9
Z6X16GPN200: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-12-385-1496
Bumper

123851496
781043: RNCC: 3 | RNVC: 2

5 May 2011

5340-12-168-6934
Loop Clamp

121686934
LN9490A10: RNCC: 2 | RNVC: 2

28 Mar 1977

5340-12-358-7925
Nonmetallic Bumper

123587925
2500271-71108.04: RNCC: 2 | RNVC: 2
185034: RNCC: 3 | RNVC: 2
0120124: RNCC: 5 | RNVC: 9
2500271-71108.04: RNCC: 5 | RNVC: 9

14 Nov 2002

5340-12-178-6850
Mounting Bracket

121786850
3141400038: RNCC: 3 | RNVC: 2
3141400038: RNCC: 5 | RNVC: 2

9 May 1979

5340-12-347-3509
Nut And Bolt Retainer

123473509
T622M1001212: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-12-367-9663
Retaining Clip

123679663
701612564: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-12-196-2535
Angle Bracket

121962535
03538601: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-321-7482
Angle Bracket

123217482
3638021071: RNCC: 3 | RNVC: 2
36380 21071: RNCC: 5 | RNVC: 9

21 Jun 1990

5340-12-179-3585
Spring Tension Clip

121793585
3818110239: RNCC: 3 | RNVC: 2

25 Jun 1979

5340-12-025-3576

5340-12-092-0891

5340-12-178-9663

5340-12-323-3243
Shimmy Damper

123233243
180/2F-1203007-35: RNCC: 3 | RNVC: 2
1065983: RNCC: 5 | RNVC: 2
180/2F-1203007-35: RNCC: 5 | RNVC: 9

14 Nov 1990

5340-12-192-8961
Spring Tension Clip

121928961
1079882778: RNCC: 3 | RNVC: 2
8321-14: RNCC: 5 | RNVC: 2

3 Jun 1982

5340-12-301-5873
Ball Socket Seat

123015873
9590400501: RNCC: 3 | RNVC: 2
7391-972: RNCC: 5 | RNVC: 2
7391972: RNCC: 5 | RNVC: 2

25 Oct 1984

5340-12-186-0809
Compression Cup

121860809
21-12-200-05: RNCC: 3 | RNVC: 2

27 Nov 1980

5340-12-701-5283
Loop Clamp

127015283
VG95211-ML-127015283: RNCC: 2 | RNVC: 2
5.12.6105.0003.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-164-4431
Angle Bracket

121644431
2360-390000.01.0: RNCC: 2 | RNVC: 2
2360-390000.01.0: RNCC: 3 | RNVC: 2
2360-390000-01-0: RNCC: 5 | RNVC: 2
2360-390000.01.0: RNCC: 5 | RNVC: 2
2360-390000-01-0: RNCC: 5 | RNVC: 9
2360-390000.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-382-2444
Access Cover

123822444
51017050024: RNCC: 3 | RNVC: 2

26 May 2010

5340-12-302-0632
Angle Bracket

123020632
3818300114: RNCC: 3 | RNVC: 2

29 Nov 1984

5340-12-168-2810
Loop Clamp

121682810
LN9490B4: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-311-7387
Mending Plate

123117387
272.338 233: RNCC: 2 | RNVC: 2
272.338 233: RNCC: 5 | RNVC: 2

13 Oct 1987

5340-12-300-2701
Mending Plate

123002701
A11A121203211: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-378-1882
Dust And Moisture Seal Protective Cap-Plug

123781882
81960020404: RNCC: 3 | RNVC: 2
81.96002-0404: RNCC: 5 | RNVC: 2

18 Mar 2009

5340-12-303-8143
Spring Tension Clip

123038143
6100127-0000.13: RNCC: 2 | RNVC: 2
8791312064: RNCC: 3 | RNVC: 9
8791312064: RNCC: 5 | RNVC: 9

6 May 1985

5340-12-316-9021
Butt Hinge

123169021
DIN7955-C60-ST-BK: RNCC: 2 | RNVC: 2

22 Feb 1989

5340-12-164-3539
Dust And Moisture Seal Protective Cap

121643539
490126-22406-00: RNCC: 3 | RNVC: 2
895380: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-159-3080
Door Handle

121593080
100330-2500.18: RNCC: 2 | RNVC: 2
100330-2500.18: RNCC: 3 | RNVC: 2
100330-2500.18: RNCC: 5 | RNVC: 9
100330-2500-18: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-3143
Access Cover

121643143
400012-112000-01: RNCC: 3 | RNVC: 2
12803-112000-01: RNCC: 5 | RNVC: 9
12803-112000.01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-134-3482
Retaining Strap

121343482
NO PRIMARY REF 12-134-3482: RNCC: 3 | RNVC: 2
DIN49045-29-ST-VERBLEIT: RNCC: 5 | RNVC: 9
29DIN49045-ST-VERBLEIT: RNCC: 5 | RNVC: 9
29DIN49045FLUSZSTAHLVERBLEIT: RNCC: 5 | RNVC: 9
29DIN49045STVERBLEIT: RNCC: 5 | RNVC: 9
1025298-VERBLEIT: RNCC: 5 | RNVC: 9
1025298VERBLEIT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-5810
Access Cover

121975810
2562-20.13: RNCC: 3 | RNVC: 2
2562-20-13: RNCC: 5 | RNVC: 9
2562-20.13: RNCC: 5 | RNVC: 9

7 Nov 1983

5340-12-328-9753
Loop Clamp

123289753
DIN3015-LG-2R-15-PA6-W1: RNCC: 2 | RNVC: 2
RANR16-215: RNCC: 3 | RNVC: 2
215PA-DP-AS: RNCC: 3 | RNVC: 2
RANR16-215: RNCC: 5 | RNVC: 2
DIN3015-LG-2R-15-PA-W1: RNCC: 5 | RNVC: 2
VG95932C-15-PA-W1: RNCC: 5 | RNVC: 9

4 Jul 1992

5340-12-354-6121
Access Cover

123546121
5.046-287.0: RNCC: 3 | RNVC: 2

8 Aug 2001

5340-12-195-6573
Loop Clamp

121956573
DIN3016-2-G1-92X12-W5: RNCC: 2 | RNVC: 2
SP92/12SKZ-W5: RNCC: 3 | RNVC: 2
DIN3016-G1-92X12-W5: RNCC: 3 | RNVC: 2
1310705092: RNCC: 5 | RNVC: 2
SP92-12SKZ1-4571: RNCC: 5 | RNVC: 2
SP92/12SKZ-1.4571: RNCC: 5 | RNVC: 2
VG95931-G92X12-1.4571: RNCC: 5 | RNVC: 9
VG95931-G92X12-W5: RNCC: 5 | RNVC: 9
DIN3016-G1-92X12-W5: RNCC: 5 | RNVC: 9

24 Mar 1983

5340-12-180-0304
Nonmetallic Bumper

121800304
2300109-188005.015.0: RNCC: 2 | RNVC: 2
2300109-188005.015.0: RNCC: 3 | RNVC: 2
2300109-188005.015.0: RNCC: 3 | RNVC: 2
2300109-188005.015.0: RNCC: 3 | RNVC: 2
2300109-188005-015-0: RNCC: 5 | RNVC: 2
2300109-188005-015-0: RNCC: 5 | RNVC: 9
2300109-188005.015.0: RNCC: 5 | RNVC: 9

17 Aug 1979

5340-12-316-4768
Bow Handle

123164768
521910-190223.000.0: RNCC: 2 | RNVC: 2
521910-190223.000.0: RNCC: 3 | RNVC: 2
22013.0.08.221.00: RNCC: 3 | RNVC: 2
1271885: RNCC: 5 | RNVC: 2
22013.0.08.221.00: RNCC: 5 | RNVC: 9

19 Jan 1989

5340-12-376-4361
Mounting Bracket

123764361
J92228511-001: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-12-311-4847
Helical Compression Spring Retainer

123114847
2300216-182520.000.0: RNCC: 2 | RNVC: 2
2300216-182520.000.0: RNCC: 3 | RNVC: 2
604-51.75.301-16: RNCC: 3 | RNVC: 2
604-51-75-301-16: RNCC: 5 | RNVC: 2
2300216-182520.000.0: RNCC: 5 | RNVC: 9

9 Sep 1987

5340-12-380-7541
Loop Clamp

123807541
DIN3015-ZG2G-16-16-PP-W2: RNCC: 2 | RNVC: 2
216/16PPH GD AS M W2: RNCC: 3 | RNVC: 2
81974456027: RNCC: 5 | RNVC: 2
21240: RNCC: 5 | RNVC: 2

25 Nov 2009

5340-12-366-1084
Fuehrungs- Schiene

123661084
2500267-190700.006.0: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-199-6906
Mending Plate

121996906
A-296770-034: RNCC: 3 | RNVC: 2
A296770-034: RNCC: 5 | RNVC: 2

23 May 1984

5340-12-198-5979
Resilient Mount

121985979
155016-M8-HD.ST-69: RNCC: 3 | RNVC: 2
5220 HTHDS: RNCC: 3 | RNVC: 2
60-52-20 HD-M8-H: RNCC: 5 | RNVC: 2
VG95406-N4-8-Q-ST: RNCC: 5 | RNVC: 9
5220HTHDS: RNCC: 5 | RNVC: 9

14 Feb 1984

5340-12-179-7598
Mounting Plate

121797598
81.42906.2040: RNCC: 3 | RNVC: 2
81429062040: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-316-2932
Mending Plate

123162932
5184676: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-328-5150
Butt Hinge

123285150
6540000: RNCC: 3 | RNVC: 2
1208130: RNCC: 5 | RNVC: 2

26 May 1992

5340-12-389-9916
Mounting Plate

123899916
C21743Z091954: RNCC: 3 | RNVC: 2

21 Sep 2012

5340-12-333-3574
Angle Bracket

123333574
81429020170: RNCC: 2 | RNVC: 2
81429020170: RNCC: 3 | RNVC: 2
81.42902.0170: RNCC: 5 | RNVC: 2

6 Dec 1993

5340-12-182-8278
Loop Clamp

121828278
LN9491BK28: RNCC: 2 | RNVC: 2

27 Feb 1980

5340-12-179-5104
Mounting Bracket

121795104
4355440938: RNCC: 3 | RNVC: 2

4 Jul 1979

5340-12-338-6695
Retaining Band

123386695
0960901: RNCC: 3 | RNVC: 2

14 Aug 1995

5340-12-365-8849
Friction Catch

123658849
460099: RNCC: 3 | RNVC: 2

16 Feb 2005

5340-12-305-1774
Angle Bracket

123051774
0446 2505: RNCC: 3 | RNVC: 2
4462505EE5091-29: RNCC: 5 | RNVC: 2

3 Oct 1985

5340-12-164-3112
Pipe Bracket

121643112
61-171: RNCC: 3 | RNVC: 2
661171: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-341-8946
Access Cover

123418946
00998510-GE: RNCC: 3 | RNVC: 2
00998510-GELB LACKIERT: RNCC: 5 | RNVC: 2

13 Nov 1996

5340-12-194-1482
Loop Clamp

121941482
TS16: RNCC: 3 | RNVC: 2
DZ0803747: RNCC: 5 | RNVC: 2
5N3821.021-11: RNCC: 5 | RNVC: 2
2508 700 00012: RNCC: 5 | RNVC: 2
5800583-096190.110: RNCC: 5 | RNVC: 2
TS16: RNCC: 5 | RNVC: 9

6 Oct 1982

5340-12-175-3360
Resilient Mount

121753360
431121273: RNCC: 3 | RNVC: 2
845-431121273: RNCC: 5 | RNVC: 2

11 Sep 1978

5340-12-314-5235
Access Cover

123145235
272.1767.21-06: RNCC: 2 | RNVC: 2
272.1767.21-06: RNCC: 3 | RNVC: 2

15 Jul 1988

5340-12-161-0364
Rod End Connector

121610364
160-24201-02: RNCC: 3 | RNVC: 2
160-24201-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-0102
Halter

121780102
AM1168-46ED1: RNCC: 3 | RNVC: 2
0005451084: RNCC: 5 | RNVC: 2

14 Mar 1979

5340-12-392-7842
Rim Lock

123927842
237.76.620: RNCC: 3 | RNVC: 2

10 Jul 2013

5340-12-337-2759
Retaining Strap

123372759
105-89956.11: RNCC: 3 | RNVC: 2

9 Feb 1995

5340-12-369-6591
Lock-Release Lever

123696591
63019: RNCC: 3 | RNVC: 2

7 Aug 2006

5340-12-350-9220
Angle Bracket

123509220
T671M1009208: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-12-306-8221
Catch Strike

123068221
54.0042.346.05: RNCC: 3 | RNVC: 2

7 Apr 1986

5340-12-338-3226
Access Door

123383226
1189201: RNCC: 3 | RNVC: 2
EZ11892: RNCC: 5 | RNVC: 2

23 Jun 1995

5340-12-170-7794
Resilient Mount

121707794
DIN95363-A25X10-NBR45ST-M6X19: RNCC: 2 | RNVC: 2
811.000.025.010.06X19.NBR45.ST: RNCC: 5 | RNVC: 2
81100-25X20X10-M6X19.NBR45.ST: RNCC: 5 | RNVC: 2
25388BSOX4590: RNCC: 5 | RNVC: 2
25388SMX450: RNCC: 5 | RNVC: 2
25388,NBR45ST: RNCC: 5 | RNVC: 2
G88022-D604-T009: RNCC: 5 | RNVC: 2
VG95363-A25X10-NBR45ST-M6X19: RNCC: 5 | RNVC: 9
25388SMX450: RNCC: 5 | RNVC: 9

5 Aug 1977

5340-12-175-7067
Spring Tension Clip

121757067
4567656: RNCC: 3 | RNVC: 2
5300074-140000-002: RNCC: 5 | RNVC: 9
5300074-140000.002: RNCC: 5 | RNVC: 9

11 Oct 1978

5340-12-702-6397
Mounting Bracket

127026397
VG95211-ML-127026397: RNCC: 2 | RNVC: 2
84.7214-1766: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-176-6273
Double Angle Bracket

121766273
5800822-051-041: RNCC: 3 | RNVC: 2
5800822-051.041: RNCC: 5 | RNVC: 2

11 Dec 1978

5340-12-354-8285
Multiple Angle Bracket

123548285
G24927-E4040-Y410: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-329-8017
Spring Tension Clip

123298017
95049-170-002-011: RNCC: 3 | RNVC: 2
95049-170-002-011: RNCC: 5 | RNVC: 9

1 Oct 1992

5340-12-701-9033
Loop Clamp

127019033
VG95211-ML-127019033: RNCC: 2 | RNVC: 2
N1119-589: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-192-5284
Pad Eye

121925284
65.7091.680.01-A001: RNCC: 3 | RNVC: 2
65-7091-680-01A001: RNCC: 5 | RNVC: 2
248553: RNCC: 5 | RNVC: 2

3 May 1982

5340-12-321-3941
Metal Runner

123213941
C26300-A43-C4: RNCC: 3 | RNVC: 2

15 May 1990

5340-12-350-5106
Mending Plate

123505106
160-28234-02: RNCC: 3 | RNVC: 2

6 Apr 2000

5340-12-163-2461
Dust And Moisture Seal Protective Cap

121632461
1918-121715.015: RNCC: 2 | RNVC: 2
1918-121715-015: RNCC: 5 | RNVC: 2
1918-121715-015: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-357-2778
Butt Hinge Leaf

123572778
VF4184-00200-045: RNCC: 3 | RNVC: 2

29 May 2002

5340-12-182-1495
Mounting Bracket

121821495
5800823-0301-301: RNCC: 3 | RNVC: 2
5800823-0301.301: RNCC: 5 | RNVC: 2
5800823-0301-301: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-164-1278
Access Cover

121641278
100356-303000-05: RNCC: 2 | RNVC: 2
100356-303000.05: RNCC: 5 | RNVC: 2
100356-303000-05: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-330-3314
Compression Cup

123303314
H105-1 88NBR101-1.4571: RNCC: 3 | RNVC: 2

3 Dec 1992

5340-12-190-6832
Bow Handle

121906832
NO PRIMARY REF 12-190-6832: RNCC: 3 | RNVC: 2
6019 135144: RNCC: 5 | RNVC: 9
6019135144: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-301-0654
Retaining Strap

123010654
54.0028.114.01: RNCC: 3 | RNVC: 2

20 Sep 1984

5340-12-194-5671
Dust And Moisture Seal Protective Cap

121945671
6540010: RNCC: 3 | RNVC: 2

18 Nov 1982

5340-12-364-3552
Manual Control Handle

123643552
2372.4009: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-12-338-4119
Mending Plate

123384119
6736263: RNCC: 2 | RNVC: 2
6736263: RNCC: 3 | RNVC: 2
6736263: RNCC: 5 | RNVC: 9

5 Jul 1995

5340-12-377-1959
Mounting Plate

123771959
309756: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-367-9251
Dust And Moisture Seal Protective Cap

123679251
210ZL20X20: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-12-320-0200
Manual Control Handle

123200200
20809-295: RNCC: 3 | RNVC: 2

28 Nov 1989

5340-12-319-0764
Mounting Bracket

123190764
107374: RNCC: 3 | RNVC: 2
107374: RNCC: 5 | RNVC: 2
107374: RNCC: 5 | RNVC: 9

5 Sep 1989

5340-12-304-3900

5340-12-348-2789
Flush Bolt

123482789
5300.230.153.000: RNCC: 3 | RNVC: 2

21 May 1999

5340-12-319-6575
Rod End Clevis

123196575
M514005: RNCC: 3 | RNVC: 9
M514005: RNCC: 5 | RNVC: 2

23 Oct 1989

5340-12-365-6898
Dust And Moisture Seal Protective Plug

123656898
6019970386: RNCC: 3 | RNVC: 2

25 Jan 2005

5340-12-173-1390
Mending Plate

121731390
23290-204070: RNCC: 2 | RNVC: 2

22 Mar 1978

5340-12-342-6170
Clamping Catch

123426170
U100-3311-400: RNCC: 2 | RNVC: 2
U100-3311-400: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-198-3014
Webbing Strap

121983014
27 0323 104: RNCC: 2 | RNVC: 2
9859348: RNCC: 3 | RNVC: 2
9859348: RNCC: 5 | RNVC: 9
000-B2-25X2,0X550-PE-RAL6031: RNCC: 6 | RNVC: 9

13 Jan 1984

5340-12-343-9812
Access Cover

123439812
536519-0811.000: RNCC: 2 | RNVC: 2
536519-0811.000: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-12-363-8464
Mounting Bracket

123638464
J28130038-401: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-345-0885
Hand Crank

123450885
6115-10-25-40: RNCC: 3 | RNVC: 2

28 Jan 1998

5340-12-326-5316
Mending Plate

123265316
4900346-010500.06: RNCC: 2 | RNVC: 2
4900346-010500.06: RNCC: 3 | RNVC: 2

1 Oct 1991

5340-12-328-3705
Loop Clamp

123283705
DIN3016-1-A1-12X9-W5: RNCC: 2 | RNVC: 2
DIN3016-A1-12X9-W5: RNCC: 3 | RNVC: 2
RS1.12/9-W5: RNCC: 3 | RNVC: 2
DIN3016-A1-12X9-W5: RNCC: 5 | RNVC: 9

12 May 1992

5340-12-386-4336
Mounting Bracket

123864336
9999261-201100.004.0: RNCC: 3 | RNVC: 2

1 Sep 2011

5340-12-386-1038
Snap-In Threaded Standoff

123861038
1030105-010260.000.0: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-12-322-0085
Double Angle Bracket

123220085
1000192-06 0 30100.23: RNCC: 2 | RNVC: 2
1000192-06 0 30100.23: RNCC: 3 | RNVC: 2
1000192-06 0 30100.23: RNCC: 5 | RNVC: 9

17 Jul 1990

5340-12-318-8124
Angle Bracket

123188124
1700001-0.11A: RNCC: 2 | RNVC: 2
505876: RNCC: 3 | RNVC: 2
1700001-0.11A: RNCC: 5 | RNVC: 9

18 Aug 1989

5340-12-369-4285
Electronic Equipment Hardware Kit

123694285
1669095: RNCC: 3 | RNVC: 2

3 Jul 2006

5340-12-702-1792
Mounting Bracket

127021792
VG95211-ML-127021792: RNCC: 2 | RNVC: 2
30.7204.1021: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-308-7346
Metal Runner

123087346
1281-12000.06: RNCC: 2 | RNVC: 2
159111: RNCC: 3 | RNVC: 2
1281-12000.06: RNCC: 5 | RNVC: 2

12 Nov 1986

5340-12-306-3571
Mending Plate

123063571
A-230609-002: RNCC: 3 | RNVC: 2
A230609-002: RNCC: 5 | RNVC: 2

24 Feb 1986

5340-12-376-7800
Loop Clamp

123767800
FH-16-000: RNCC: 3 | RNVC: 2
0005334943: RNCC: 5 | RNVC: 2
K-2749-0: RNCC: 5 | RNVC: 2

6 Nov 2008

5340-12-134-1049
Retaining Strap

121341049
F5167-29-06-22: RNCC: 3 | RNVC: 2
5167-29-06-22: RNCC: 5 | RNVC: 2
5167-29-06.22: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-325-8003
Nonmetallic Bumper

123258003
5801984-203000.000.0POS11: RNCC: 2 | RNVC: 2
PLATTE50X5X2MM.NR35: RNCC: 3 | RNVC: 2
5801984-203000.000.0P0S11: RNCC: 3 | RNVC: 2

11 Jul 1991

5340-12-352-2142
Angle Bracket

123522142
T531M4521233: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-182-6891
Electrical-Mechanical Equipment Post

121826891
2459301: RNCC: 3 | RNVC: 2

20 Feb 1980

5340-12-352-6458
Helical Compression Spring Seat

123526458
1290 306 408: RNCC: 3 | RNVC: 2
42490444: RNCC: 5 | RNVC: 2
1290306408: RNCC: 5 | RNVC: 2

4 Dec 2000

5340-12-350-5929
Loop Clamp

123505929
54.1038.035.10: RNCC: 2 | RNVC: 2
54.1038.035.10: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-366-0618
Rod End Clevis

123660618
085090: RNCC: 3 | RNVC: 2

4 Mar 2005

5340-12-146-8800
Einfach Abg Halter

5340-12-180-5610
Spring Tension Clip

121805610
01236697: RNCC: 3 | RNVC: 2
1236697EE8928-80: RNCC: 5 | RNVC: 2
N92031G1: RNCC: 5 | RNVC: 2

19 Sep 1979

5340-12-301-4338
Leather Strap

123014338
TK-B35H-5340-119: RNCC: 2 | RNVC: 2
598719: RNCC: 3 | RNVC: 2
1207-918.09(4): RNCC: 3 | RNVC: 9

13 Oct 1984

5340-12-701-2800
Rod End Clevis

127012800
VG95211-ML-127012800: RNCC: 2 | RNVC: 2
5.12.5101.0510.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2435
Mounting Plate

127012435
VG95211-ML-127012435: RNCC: 2 | RNVC: 2
5.12.3300.6000.17: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-316-1139
Lock-Release Lever

123161139
59001-008: RNCC: 3 | RNVC: 2
5800.7387: RNCC: 3 | RNVC: 2
59 001-008: RNCC: 5 | RNVC: 9

23 Dec 1988

5340-12-374-6946
Manual Control Lever

123746946
SK872-166430.001.0: RNCC: 3 | RNVC: 2
7081349: RNCC: 5 | RNVC: 2

7 Mar 2008

5340-12-307-2595
Hasp Staple

123072595
0009882583: RNCC: 3 | RNVC: 2
0009882583: RNCC: 5 | RNVC: 9
621.1/2 17X16: RNCC: 5 | RNVC: 9

27 May 1986

5340-12-320-3896
Access Cover

123203896
G-2650-1-4-A: RNCC: 2 | RNVC: 2
G-2650-1-4-A: RNCC: 3 | RNVC: 2
1-2650-8-4: RNCC: 5 | RNVC: 2
G-2650-1-4: RNCC: 5 | RNVC: 2
G-2650-1-4: RNCC: 5 | RNVC: 2

9 Jan 1990

5340-12-701-3248
Mounting Plate

127013248
VG95211-ML-127013248: RNCC: 2 | RNVC: 2
5.12.5101.8510.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-340-0668
Loop Clamp

123400668
DIN3016-1-E1-63X15W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E1-63X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.63/15-W1: RNCC: 3 | RNVC: 2
RSGU63/15: RNCC: 5 | RNVC: 2
RSGU0.63/15: RNCC: 5 | RNVC: 9
DIN3016-E1-63X15W1-2: RNCC: 5 | RNVC: 9

22 Feb 1996

5340-12-313-0192
Angle Bracket

123130192
P-086148-415: RNCC: 3 | RNVC: 2
P086148-415: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-318-5690
Mending Plate

123185690
A-050250-013: RNCC: 3 | RNVC: 2
A050250-013: RNCC: 5 | RNVC: 2

28 Jul 1989

5340-12-326-5876
Door Button

123265876
200-0524: RNCC: 3 | RNVC: 2
0.24.0544.0: RNCC: 3 | RNVC: 2
1000-229: RNCC: 3 | RNVC: 2

10 Oct 1991

5340-12-333-9171
Mounting Bracket

123339171
406-2-26: RNCC: 3 | RNVC: 2
406-2.26: RNCC: 5 | RNVC: 2

23 Feb 1994

5340-12-129-2847
Padlock

121292847
DIN7465-C40R-MS-ST-VERZINKT: RNCC: 2 | RNVC: 2
C40RDIN7465MSSTVERZINKT: RNCC: 5 | RNVC: 2
007465040301: RNCC: 5 | RNVC: 2
C40RDIN7465-MS-ST-VERZINKT: RNCC: 5 | RNVC: 2
DIN7465-D3-40-ZN-MS-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-3578
Mending Plate

123063578
P-230729-131: RNCC: 3 | RNVC: 2
P230729-131: RNCC: 5 | RNVC: 2

24 Feb 1986

5340-12-166-2112
Resilient Mount

121662112
GE21-03-5-302-B: RNCC: 3 | RNVC: 2
GE21-03-5-302B: RNCC: 5 | RNVC: 2
GE21-03-5-302B: RNCC: 5 | RNVC: 9

12 Aug 1976

5340-12-386-5338
Block Clamp

123865338
4000A-320420.011.0: RNCC: 3 | RNVC: 2

8 Sep 2011

5340-12-351-3197
Mounting Plate

123513197
T311M3242101: RNCC: 3 | RNVC: 2

13 Jul 2000

5340-12-192-9387
Loop Clamp

121929387
038-0030-014-020: RNCC: 3 | RNVC: 2
000-338-35-45: RNCC: 5 | RNVC: 2
000-338-35-45: RNCC: 5 | RNVC: 2
0003382645: RNCC: 5 | RNVC: 2
50156004: RNCC: 5 | RNVC: 2
000 338 35 45: RNCC: 5 | RNVC: 9
038 000 001 018: RNCC: 5 | RNVC: 9
038 000 007 018: RNCC: 5 | RNVC: 9
038-000-007-018: RNCC: 5 | RNVC: 9
038000007018: RNCC: 5 | RNVC: 9

7 Jun 1982

5340-12-167-0475
Loop Clamp

121670475
DIN3016-2-G1-155X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-155X20-W1-2: RNCC: 3 | RNVC: 2
SP155/20SKZ: RNCC: 3 | RNVC: 2
1510000155: RNCC: 5 | RNVC: 2
SP155-20SKZ: RNCC: 5 | RNVC: 2
VG95931-G155X20-W1: RNCC: 5 | RNVC: 9
DIN3016-G1-155X20-W1-2: RNCC: 5 | RNVC: 9
VG95931G155X20W1: RNCC: 5 | RNVC: 9

13 Nov 1976

5340-12-308-9220
Retaining Strap

123089220
0336 3064: RNCC: 3 | RNVC: 2
3363064: RNCC: 5 | RNVC: 2
91501342: RNCC: 5 | RNVC: 2
03363064ED0150-16: RNCC: 5 | RNVC: 2
3363064: RNCC: 5 | RNVC: 2
137541: RNCC: 5 | RNVC: 2

27 Nov 1986

5340-12-357-9118
Section Block Clamp

123579118
J29120259-001: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-350-0882
Mounting Bracket

123500882
2300262-181040.000.0: RNCC: 3 | RNVC: 2
1276025: RNCC: 5 | RNVC: 2

14 Feb 2000

5340-12-183-9048
Loop Clamp

121839048
2254026: RNCC: 3 | RNVC: 2
2050: RNCC: 5 | RNVC: 2
6-472-1211: RNCC: 5 | RNVC: 2
N09712: RNCC: 5 | RNVC: 9

29 May 1980

5340-12-309-7067
Electrical-Mechanical Equipment Post

123097067
VG95148C4XM2X10-2.0380.30-E2A: RNCC: 2 | RNVC: 2
VG95148C4XM2X10-MS-VERNICKELT: RNCC: 2 | RNVC: 2
VG95148C4XM2X10-2.0380.30-E2A: RNCC: 3 | RNVC: 2
VG95148C4XM2X10-MS-VERNICKELT: RNCC: 3 | RNVC: 2
DA 4-M2X10: RNCC: 3 | RNVC: 2

18 Feb 1987

5340-12-700-3007
Access Cover

127003007
51-262385064: RNCC: 2 | RNVC: 2
765.54.160: RNCC: 3 | RNVC: 2
765-54-160: RNCC: 5 | RNVC: 9

4 Dec 1991

5340-12-329-2371
Resilient Mount

123292371
236: RNCC: 3 | RNVC: 2

25 Jul 1992

5340-12-370-7905
Manual Control Lever

123707905
383175531: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-12-043-3472

5340-12-161-1275
Padlock

121611275
116HB/30-30MM: RNCC: 3 | RNVC: 2
85HB/30-24MM: RNCC: 3 | RNVC: 2
116HB30-30MM: RNCC: 5 | RNVC: 2
75HB30: RNCC: 5 | RNVC: 2
85-30HB24: RNCC: 5 | RNVC: 2
75HB30-24MM: RNCC: 5 | RNVC: 2
85HB30-24MM: RNCC: 5 | RNVC: 2
DIN7465-E1-30-BK-MIT HB 24MM: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-337-3782
Dust And Moisture Seal Protective Plug

123373782
300V031: RNCC: 3 | RNVC: 2
81960020361: RNCC: 3 | RNVC: 2
GPN300/V031: RNCC: 5 | RNVC: 2
81.96002-0361: RNCC: 5 | RNVC: 2
GPN300,V031: RNCC: 5 | RNVC: 9
GPN300-V031: RNCC: 5 | RNVC: 9
V031: RNCC: 5 | RNVC: 9

22 Feb 1995

5340-12-347-4555
Handwheel

123474555
DIN390-A63-GG: RNCC: 2 | RNVC: 2
DIN390A63-GG: RNCC: 5 | RNVC: 2

14 Dec 1998

5340-12-177-2691
Loop Clamp

121772691
3372241EF0155-21: RNCC: 3 | RNVC: 2
0155-21-45-14: RNCC: 5 | RNVC: 2
0337 2241: RNCC: 5 | RNVC: 2
3372241: RNCC: 5 | RNVC: 9

24 Jan 1979

5340-12-350-5915
Manual Control Lever

123505915
160-88316-19: RNCC: 3 | RNVC: 2
160-88316-19: RNCC: 5 | RNVC: 9

18 Apr 2000

5340-12-346-2715
Access Cover

123462715
160-30119-12: RNCC: 3 | RNVC: 2
160-30119-12: RNCC: 5 | RNVC: 9

6 Jul 1998

5340-12-358-9597
Padlock Eye

123589597
0049942145: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-330-7162
Dust And Moisture Seal Boot

123307162
5.178-016.0: RNCC: 3 | RNVC: 2
5.178-016: RNCC: 5 | RNVC: 9

29 Jan 1993

5340-12-196-9999
Webbing Strap

121969999
4900059-323465.000.0: RNCC: 2 | RNVC: 2
4900059-323465.000.0: RNCC: 3 | RNVC: 2
4900059-323465.000.0: RNCC: 3 | RNVC: 2
221-00-361-3: RNCC: 3 | RNVC: 2
79018-1300: RNCC: 3 | RNVC: 2
4900059-323465.000.0: RNCC: 3 | RNVC: 2
01026-1-GLATT-FE1300MM: RNCC: 3 | RNVC: 2
4900059-323465-000-0: RNCC: 5 | RNVC: 2
DIN60060-1-50X1300-C5: RNCC: 5 | RNVC: 9
221-00-361-3: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-701-3003
Rod End Connector

127013003
VG95211-ML-127013003: RNCC: 2 | RNVC: 2
5.12.5101.4890.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-185-1938
Retaining Strap

121851938
NO PRIMARY REF 12-185-1938: RNCC: 3 | RNVC: 2
17-2-7091-2: RNCC: 5 | RNVC: 9

18 Sep 1980

5340-12-703-2115
Retaining Strap

127032115
VG95211-ML-127032115: RNCC: 2 | RNVC: 2
5892A-10: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-190-8244
Detent Plunger

121908244
23114-1608.06: RNCC: 2 | RNVC: 2
23114-1608.06: RNCC: 3 | RNVC: 2
23114-1608.06: RNCC: 5 | RNVC: 9
23114-1608-06: RNCC: 5 | RNVC: 9
23114-1608-06: RNCC: 5 | RNVC: 9
23114-1608.06: RNCC: 5 | RNVC: 9

16 Dec 1981

5340-12-184-5197
Access Cover

121845197
5801339-02021-002: RNCC: 3 | RNVC: 2
5801339-02021.002: RNCC: 5 | RNVC: 2

29 Jul 1980

5340-12-168-5702
Dust And Moisture Seal Protective Plug

121685702
1000025-310000-05: RNCC: 3 | RNVC: 2
1000025-310000.05: RNCC: 3 | RNVC: 2
1000025-310000.05: RNCC: 5 | RNVC: 9
1000025-310000-05: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-337-2712
Lock-Release Lever

123372712
52.5001.004.00: RNCC: 3 | RNVC: 2

9 Feb 1995

5340-12-339-7661
Butt Hinge Leaf

123397661
8407371002: RNCC: 3 | RNVC: 2
84073 71002: RNCC: 5 | RNVC: 9

15 Jan 1996

5340-12-002-1335

5340-12-308-9045
Access Cover

123089045
4-68747/E: RNCC: 3 | RNVC: 2

27 Nov 1986

5340-12-198-7582
Catch Strike

121987582
1000042-132110.07: RNCC: 3 | RNVC: 2
1000042-132110-07: RNCC: 5 | RNVC: 2
1000042-132110.07: RNCC: 5 | RNVC: 9

23 Feb 1984

5340-12-195-8100
Mending Plate

121958100
P-145350-073: RNCC: 3 | RNVC: 2
P145350-073: RNCC: 5 | RNVC: 2

19 Apr 1983

5340-12-369-1900
Quick Release Plunger

123691900
GN615.1-M8-BN: RNCC: 3 | RNVC: 2

1 Jun 2006

5340-12-183-6299
Access Cover

121836299
30-79350-0195: RNCC: 3 | RNVC: 2

6 May 1980

5340-12-194-8365
Ball Socket Seat

121948365
009-099.100-005: RNCC: 3 | RNVC: 2

14 Dec 1982

5340-12-195-0341
Angle Bracket

121950341
42-1543-280000.02.0: RNCC: 3 | RNVC: 2
42-1543-280000-02-0: RNCC: 5 | RNVC: 2
42-1543-280000.02.0: RNCC: 5 | RNVC: 9

4 Jan 1983

5340-12-188-0455
Bridge Clamp

121880455
2300109-182300.003.0: RNCC: 2 | RNVC: 2
2300109-182300.003.0: RNCC: 3 | RNVC: 2
2300109-182300.003.0: RNCC: 3 | RNVC: 2
2300109-182300-003-0: RNCC: 5 | RNVC: 2
2300109-182300-003-0: RNCC: 5 | RNVC: 2
2300109-182300-003-0: RNCC: 5 | RNVC: 9
2300109-182300.003.0: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-179-1819
Retaining Strap

121791819
5800748-11.136: RNCC: 3 | RNVC: 2
5800748-11-136: RNCC: 5 | RNVC: 9

15 Jun 1979

5340-12-339-9038
Mounting Plate

123399038
480-1611-12-10-00: RNCC: 3 | RNVC: 2
480/1611-12-10-00: RNCC: 5 | RNVC: 2

31 Jan 1996

5340-12-701-8130
Mounting Bracket

127018130
VG95211-ML-127018130: RNCC: 2 | RNVC: 2
5.12.9201.0542.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-4623
Lock-Release Lever

127024623
VG95211-ML-127024623: RNCC: 2 | RNVC: 2
5.51.0603.1130.91: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-8481
Loop Clamp

127018481
VG95211-ML-127018481: RNCC: 2 | RNVC: 2
5159A-8-1: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-326-9509
Metal Grille

123269509
8200900845: RNCC: 3 | RNVC: 2

13 Nov 1991

5340-12-314-2472
Angle Bracket

123142472
3815010720: RNCC: 3 | RNVC: 2
381 501 07 20: RNCC: 5 | RNVC: 2

21 Jun 1988

5340-12-313-4618
Butt Hinge

123134618
2300013-5861.05: RNCC: 2 | RNVC: 2
2300013-5861.05: RNCC: 3 | RNVC: 2
2300013-5861.05: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-318-4259
Access Cover

123184259
40 0166 562: RNCC: 2 | RNVC: 2
40 0166 562: RNCC: 3 | RNVC: 2
40 0166 562: RNCC: 5 | RNVC: 9

13 Jul 1989

5340-12-340-6977
Double Angle Bracket

123406977
5810 119 59 00: RNCC: 3 | RNVC: 2
58101195900: RNCC: 5 | RNVC: 2

24 May 1996

5340-12-354-8661
Manual Control Lever

123548661
131413: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-339-4506
Mounting Plate

123394506
4220 306 071: RNCC: 3 | RNVC: 2
4220306071: RNCC: 5 | RNVC: 2

24 Nov 1995

5340-12-329-2508
Angle Bracket

123292508
135L54016: RNCC: 3 | RNVC: 2
135L54016D1: RNCC: 5 | RNVC: 2
135L54016D1: RNCC: 5 | RNVC: 2

28 Jul 1992

5340-12-176-2570
Hasp Staple

121762570
183809767: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-319-4497
Electrical-Mechanical Equipment Post

123194497
VG95148B7XM4X35-ST: RNCC: 2 | RNVC: 2
5.04.351: RNCC: 3 | RNVC: 2
VG95148B7XM4X35-ST: RNCC: 3 | RNVC: 2

3 Oct 1989

5340-12-304-9729
T Plate

123049729
5802028-3450: RNCC: 2 | RNVC: 2
7802070410: RNCC: 3 | RNVC: 2
78020 70410: RNCC: 5 | RNVC: 9

12 Sep 1985

5340-12-193-1277
Rod End Clevis

121931277
VG85211-21: RNCC: 2 | RNVC: 2
VG85211-21: RNCC: 3 | RNVC: 2
VG85211-2-1: RNCC: 5 | RNVC: 2

23 Jun 1982

5340-12-171-4798
Nonmetallic Bumper

121714798
81252320021: RNCC: 3 | RNVC: 2
81.25232-0021: RNCC: 5 | RNVC: 2
23230-062000-006-0: RNCC: 5 | RNVC: 9
23230-062000.006.0: RNCC: 5 | RNVC: 9

17 Oct 1977

5340-12-357-4922
Mending Plate

123574922
A-087118-041: RNCC: 3 | RNVC: 2
A087118-041: RNCC: 5 | RNVC: 2

26 Jun 2002

5340-12-196-3948
Electrical-Mechanical Equipment Post

121963948
272.1414.1-09: RNCC: 3 | RNVC: 2

4 Jul 1983

5340-12-169-7378
Catch Strike

121697378
62-6447-340-01: RNCC: 3 | RNVC: 2

3 Jun 1977

5340-12-164-5214
Pipe Bracket

121645214
23290-182000.012: RNCC: 2 | RNVC: 2
23290-182000-012: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-4168
Block Clamp

123564168
RAP-648: RNCC: 3 | RNVC: 2

26 Feb 2002

5340-12-189-8700
Electrical-Mechanical Equipment Post

121898700
35757-001: RNCC: 3 | RNVC: 2

22 Oct 1981

5340-12-365-5868
Double Angle Bracket

123655868
J29120362-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-361-0513
Angle Bracket

123610513
J28630078-403: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-12-316-5196
Metal Runner

123165196
4900278-103400.01: RNCC: 2 | RNVC: 2
4900278-103400.01: RNCC: 3 | RNVC: 2

23 Jan 1989

5340-12-702-7558
Access Cover

127027558
50-06101650055: RNCC: 2 | RNVC: 2

13 Dec 1995

5340-12-339-1374
Protection Bellows

123391374
4359877543: RNCC: 3 | RNVC: 2

16 Oct 1995

5340-12-165-4620
Spring Tension Clip

121654620
160-73552-02: RNCC: 3 | RNVC: 2
160-73552-02: RNCC: 5 | RNVC: 9

18 May 1976

5340-12-701-9197
Loop Clamp

127019197
VG95211-ML-127019197: RNCC: 2 | RNVC: 2
T2-42-15-20-BP GOST 17979-80: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-378-0822
Elastic Strap

123780822
63629026: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-393-7698
Rod End Connector

123937698
26.8454-11-12-03.00-06: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-351-4676
Mounting Plate

123514676
2500238-070410.003.0: RNCC: 2 | RNVC: 2
2500238-070410.003.0: RNCC: 3 | RNVC: 2

29 Jul 2000

5340-12-312-4860
Furniture Glide

123124860
YTR-16267: RNCC: 3 | RNVC: 2
7100051-100-01: RNCC: 5 | RNVC: 9

12 Jan 1988

5340-12-321-7055
Angle Bracket

123217055
702-247200-915-0: RNCC: 3 | RNVC: 2

18 Jun 1990

5340-12-189-2627
Pad Eye

121892627
A10-24.972.18.0: RNCC: 3 | RNVC: 2
A10-24-972-18-0: RNCC: 5 | RNVC: 2
A10-24-972-18-0: RNCC: 5 | RNVC: 9
85-691-4677: RNCC: 6 | RNVC: 9

15 Sep 1981

5340-12-387-7147
Loop Clamp

123877147
DIN3016-1-E1-8X15-W5-NBR: RNCC: 2 | RNVC: 2

26 Jan 2012

5340-12-167-2860
Mending Plate

121672860
66.3508.140.03-A002: RNCC: 3 | RNVC: 2
66-3508-140-03A002: RNCC: 5 | RNVC: 9

8 Dec 1976

5340-12-352-7537
Dust And Moisture Seal Boot

123527537
Z 011-K1 ITEM 1 (200 MM,): RNCC: 3 | RNVC: 2

12 Dec 2000

5340-12-318-0977
Multiple Angle Bracket

123180977
140-114020-000-0: RNCC: 3 | RNVC: 2
57823-765: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-301-2433
Mending Plate

123012433
P-855181-011: RNCC: 3 | RNVC: 2
P855181-011: RNCC: 5 | RNVC: 2

29 Sep 1984

5340-12-338-1097
Mending Plate

123381097
4900332-201100.03: RNCC: 2 | RNVC: 2
4900332-201100.03: RNCC: 3 | RNVC: 2
0106.21003.030: RNCC: 5 | RNVC: 2

23 May 1995

5340-12-345-4708
Mounting Plate

123454708
9954-204-014: RNCC: 3 | RNVC: 2

20 Mar 1998

5340-12-347-1219
Mounting Bracket

123471219
5096235: RNCC: 3 | RNVC: 2
5096235/1: RNCC: 5 | RNVC: 2

29 Oct 1998

5340-12-309-9794
Mending Plate

123099794
2300223-207260.09.0: RNCC: 2 | RNVC: 2
3000008-207260.09.0: RNCC: 3 | RNVC: 2
2300223-207260.09.0: RNCC: 5 | RNVC: 2
A4-248.052-77: RNCC: 5 | RNVC: 9
300000-207260.05.0: RNCC: 5 | RNVC: 9

25 Mar 1987

5340-12-313-6818
Mounting Bracket

123136818
P-896440-405: RNCC: 3 | RNVC: 2
P896440-405: RNCC: 5 | RNVC: 2

26 Apr 1988

5340-12-178-9101
Angle Bracket

121789101
5562514/4: RNCC: 3 | RNVC: 2
5562514-4: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-701-3030
Mounting Bracket

127013030
VG95211-ML-127013030: RNCC: 2 | RNVC: 2
5.12.5101.5410.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-339-6090
Protection Bellows

123396090
P 730-RH-HH-7: RNCC: 3 | RNVC: 2
PN 720-09-POS 22: RNCC: 5 | RNVC: 2

12 Dec 1995

5340-12-152-2150
Nonmetallic Solid Wheel

121522150
100278-33000.01.0: RNCC: 2 | RNVC: 2
100278-33000.01.0: RNCC: 3 | RNVC: 2
100278-33000-01-0: RNCC: 5 | RNVC: 2
100278-33000-01-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-0326
Handwheel

121980326
VG85084-A-100X9-2.1096.01: RNCC: 2 | RNVC: 2
VG85084-A-100X9-2.1096.01: RNCC: 3 | RNVC: 2
VG85084-A-100X9-2.1096.01: RNCC: 3 | RNVC: 2
VG85084-A-100X9-2.1096.01: RNCC: 3 | RNVC: 9
A100X9VG85084-RG5: RNCC: 5 | RNVC: 2
A100X9VG85084RG5: RNCC: 5 | RNVC: 2

13 Dec 1983

5340-12-353-4387
Spacing Threaded Standoff

123534387
DI653/8: RNCC: 3 | RNVC: 2
M3/SW5/08: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-12-317-4194
Mounting Plate

123174194
P-145502-014: RNCC: 3 | RNVC: 2
P145502-014: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-394-4678
Lock Key Set

123944678
9417600006: RNCC: 3 | RNVC: 2
3320224: RNCC: 5 | RNVC: 2
03320224: RNCC: 5 | RNVC: 2

4 Dec 2013

5340-12-386-0534
Retaining Clip

123860534
13 304 019: RNCC: 3 | RNVC: 2
99708412188: RNCC: 5 | RNVC: 2

4 Aug 2011

5340-12-316-4163
Spring Holder

123164163
6378758: RNCC: 3 | RNVC: 2

17 Jan 1989

5340-12-304-6699
Shimmy Damper

123046699
06-10-130-317: RNCC: 3 | RNVC: 2

12 Aug 1985

5340-12-321-2658
Mounting Plate

123212658
119328: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-12-319-9472
Mounting Bracket

123199472
102004012: RNCC: 3 | RNVC: 2

20 Nov 1989

5340-12-358-7736
Retaining Strap

123587736
0009883583: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-12-320-1190
Kunst Gleitschiene

123201190
0956601: RNCC: 3 | RNVC: 2

8 Dec 1989

5340-12-329-3102

5340-12-321-1641
Angle Bracket

123211641
03689610: RNCC: 3 | RNVC: 2

6 Apr 1990

5340-12-319-3810
Mending Plate

123193810
5802006-663000.01: RNCC: 2 | RNVC: 2
5802006-663000.01: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-172-6161
Ball Socket Seat

121726161
021129957: RNCC: 3 | RNVC: 2

31 Jan 1978

5340-12-346-6105
Mounting Plate

123466105
2930.1000: RNCC: 3 | RNVC: 2

17 Aug 1998

5340-12-197-0425
Angle Bracket

121970425
4358637012: RNCC: 3 | RNVC: 2
4358637012: RNCC: 3 | RNVC: 9

13 Sep 1983

5340-12-359-8483
Dust And Moisture Seal Protective Cap-Plug

123598483
610U3RAL3000: RNCC: 3 | RNVC: 2
610U3ROT: RNCC: 5 | RNVC: 9
GPN610-U3RAL30000: RNCC: 5 | RNVC: 9

13 Mar 2003

5340-12-360-0985
Mounting Bracket

123600985
9424270041: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-360-0540
Mounting Bracket

123600540
01490900: RNCC: 3 | RNVC: 2
05722600: RNCC: 5 | RNVC: 2

1 Apr 2003

5340-12-158-5458
Plain Solid Disk

121585458
512201-0052.000: RNCC: 3 | RNVC: 2
512201-0052: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-358-7255
Dust And Moisture Seal Protective Cap

123587255
1574-0011: RNCC: 3 | RNVC: 2
079456350: RNCC: 5 | RNVC: 9

8 Nov 2002

5340-12-317-4909
Metallic Solid Wheel

123174909
1000192-02 0 31000.07: RNCC: 2 | RNVC: 2
1000192-02 0 31000.07: RNCC: 3 | RNVC: 2
1000192-02 0 31000.07: RNCC: 5 | RNVC: 9

13 Apr 1989

5340-12-326-8369
Retaining Clip

123268369
250148-197420.00.0: RNCC: 3 | RNVC: 2

31 Oct 1991

5340-12-373-7249
Catch Strike

123737249
5.037-043.0: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-12-309-9663
Angle Bracket

123099663
2300223-205020.00.0: RNCC: 2 | RNVC: 2
2300223-205020.00.0: RNCC: 3 | RNVC: 2

24 Mar 1987

5340-12-352-0386
Mounting Plate

123520386
2500238-060100.008.0: RNCC: 2 | RNVC: 2
2500238-060100.008.0: RNCC: 3 | RNVC: 2

9 Oct 2000

5340-12-702-5081
Mounting Bracket

127025081
VG95211-ML-127025081: RNCC: 2 | RNVC: 2
5.51.6501.1075.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-366-9110
Lock-Release Lever

123669110
2300399-182100.013.0: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-701-7575
Angle Bracket

127017575
VG95211-ML-127017575: RNCC: 2 | RNVC: 2
5.12.7617.8400.11: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-337-1379
Mounting Bracket

123371379
81418015294: RNCC: 3 | RNVC: 2
81.41801.5294: RNCC: 5 | RNVC: 9

24 Jan 1995

5340-12-329-3105
Helical Compression Spring Seat

123293105
414031: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-12-385-1694
Rod End Clevis

123851694
5769960101: RNCC: 3 | RNVC: 2

6 May 2011

5340-12-180-8791
Access Cover

121808791
WW202552AX: RNCC: 3 | RNVC: 9
WW 202 552 AX: RNCC: 5 | RNVC: 2
WW202552AX: RNCC: 5 | RNVC: 2
WW 202 552 AX: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-386-6139
Spring Loaded Cylinder Fastener

123866139
03089-3206: RNCC: 3 | RNVC: 2

15 Sep 2011

5340-12-339-0210
Webbing Strap

123390210
0008660271: RNCC: 3 | RNVC: 2
10.41.091.01-600MM: RNCC: 5 | RNVC: 2
0008660271: RNCC: 5 | RNVC: 2

27 Sep 1995

5340-12-314-4321
Mounting Bracket

123144321
3875450940: RNCC: 3 | RNVC: 2
387 545 09 40: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-363-7062
Pad Eye

123637062
4607430021: RNCC: 3 | RNVC: 2

16 Jul 2004

5340-12-044-5645

5340-12-021-5922

5340-12-131-5500

5340-12-702-1677
Angle Bracket

127021677
VG95211-ML-127021677: RNCC: 2 | RNVC: 2
30.7100.2260.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-354-5601
Access Cover

123545601
VG95211-ML-123545601: RNCC: 2 | RNVC: 2
54.0054.553.00: RNCC: 3 | RNVC: 2

3 Aug 2001

5340-12-380-6627
Angle Bracket

123806627
81624105149: RNCC: 3 | RNVC: 2
81.62410-5149: RNCC: 5 | RNVC: 2

17 Nov 2009

Load More Results