What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 31 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 31 of 178

5340-12-351-5770
Casement Fastener

123515770
2300387-660355.000: RNCC: 2 | RNVC: 2
2300387-660355.000: RNCC: 3 | RNVC: 2
2300387-660355.000: RNCC: 5 | RNVC: 9

4 Aug 2000

5340-12-151-1938

5340-12-334-6452
Runner

123346452
15 0004 454: RNCC: 3 | RNVC: 2

6 Jun 1994

5340-12-352-9328
Mounting Bracket

123529328
4374266540: RNCC: 3 | RNVC: 2

9 Jan 2001

5340-12-389-9219
Spacing Threaded Standoff

123899219
8451157007: RNCC: 3 | RNVC: 2

13 Sep 2012

5340-12-181-7291
Electronic Equipment Hardware Kit

121817291
213G90G: RNCC: 3 | RNVC: 2

12 Dec 1979

5340-12-182-1300
Sicherheits Schlosz

121821300
3051 102: RNCC: 3 | RNVC: 2
3051102: RNCC: 5 | RNVC: 2
3051102: RNCC: 5 | RNVC: 2
3051102: RNCC: 5 | RNVC: 9
BKS3051102: RNCC: 5 | RNVC: 9

14 Jan 1980

5340-12-372-7879
Dust And Moisture Seal Protective Cap

123727879
13547694924: RNCC: 3 | RNVC: 2

21 Aug 2007

5340-12-369-8041
Access Cover

123698041
J92220431-001: RNCC: 3 | RNVC: 2

17 Aug 2006

5340-12-702-5487
Mounting Bracket

127025487
VG95211-ML-127025487: RNCC: 2 | RNVC: 2
5.51.7211.1481.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-348-9119
Double Angle Bracket

123489119
B3814-201-5: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-164-8535
Loop Clamp

121648535
RAPG8-216: RNCC: 3 | RNVC: 2
RAPG8-216: RNCC: 3 | RNVC: 2
RAPE8-216-GLATT: RNCC: 5 | RNVC: 2
0047805: RNCC: 5 | RNVC: 2
8433955: RNCC: 5 | RNVC: 2
RAPE8-216-GLATT: RNCC: 5 | RNVC: 2
8.216.000.064: RNCC: 5 | RNVC: 2
VG95932A2-16-PP-W1-SPV-OHNE DP: RNCC: 5 | RNVC: 9
VG95932DA-2-16-PP-W1-AS-SPV: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-180-2167
Haube Halter

121802167
2300014-189320.00.0: RNCC: 2 | RNVC: 2
2300014-189320.00.0: RNCC: 3 | RNVC: 2
2300014-189320-00-0: RNCC: 5 | RNVC: 2
2300014-189320-00-0: RNCC: 5 | RNVC: 2
2300014-189320.00.0: RNCC: 5 | RNVC: 9

30 Aug 1979

5340-12-362-1815
Door Button

123621815
409037040: RNCC: 3 | RNVC: 2

20 Jan 2004

5340-12-335-3022
Angle Bracket

123353022
0048-200000A09B: RNCC: 2 | RNVC: 2
0048-200000A09B: RNCC: 3 | RNVC: 2

8 Aug 1994

5340-12-188-6479
Double Angle Bracket

121886479
5801441-40000.003: RNCC: 3 | RNVC: 2
5801441-40000-003: RNCC: 5 | RNVC: 9
5801441-40000-003: RNCC: 5 | RNVC: 9
5801441-40000.003: RNCC: 5 | RNVC: 9

22 Jul 1981

5340-12-315-0541
Mounting Bracket

123150541
8100146-3600: RNCC: 2 | RNVC: 2
16205-146-3600: RNCC: 3 | RNVC: 2
8100146-3600: RNCC: 5 | RNVC: 2
8100146-3600: RNCC: 5 | RNVC: 9

10 Sep 1988

5340-12-162-7617
Angle Bracket

121627617
21 603-001: RNCC: 3 | RNVC: 2
21603-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-130-8815
Retaining Strap

121308815
DIN72572-22-ST-ZN: RNCC: 2 | RNVC: 2
DIN72572-22-ST-ZN: RNCC: 3 | RNVC: 2
DIN72572-22-ST: RNCC: 5 | RNVC: 9
22DIN72572ST: RNCC: 5 | RNVC: 9
DIN72572-22-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-150-7265
Turnbuckle

121507265
8X40X1-5X1016TAN16737: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-139-2369
Spring Loaded Cylinder Fastener

121392369
29-8233-0003: RNCC: 3 | RNVC: 9
29.8233.0003: RNCC: 3 | RNVC: 9

30 May 1969

5340-12-319-8428
Double Angle Bracket

123198428
218.03.43.011: RNCC: 3 | RNVC: 2
218-03-43-011: RNCC: 5 | RNVC: 2

9 Nov 1989

5340-12-703-3521
Dust And Moisture Seal Protective Cap

127033521
VG95211-ML-127033521: RNCC: 2 | RNVC: 2
ZK-27: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-316-7506
Angle Bracket

123167506
1000192-02 0 40000.03: RNCC: 2 | RNVC: 2
1000192-02 0 40000.03: RNCC: 3 | RNVC: 2
1000192-02040000.03: RNCC: 5 | RNVC: 9
1000192-02 0 40000.03: RNCC: 5 | RNVC: 9
1000192-02040000.03: RNCC: 5 | RNVC: 9
1000192-02040000.03: RNCC: 5 | RNVC: 9

8 Feb 1989

5340-12-701-8423
Loop Clamp

127018423
VG95211-ML-127018423: RNCC: 2 | RNVC: 2
5148A-50: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-335-6749
Access Cover

123356749
58R059-819: RNCC: 2 | RNVC: 2
58R059-819: RNCC: 3 | RNVC: 2

12 Sep 1994

5340-12-388-2247
Spacing Threaded Standoff

123882247
000 595 200-214: RNCC: 3 | RNVC: 2
000 595 200-214: RNCC: 5 | RNVC: 2

5 Mar 2012

5340-12-163-3842
Retaining Strap

121633842
3421300000: RNCC: 3 | RNVC: 2
EPBE2FL1X: RNCC: 5 | RNVC: 2
0003020750: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-391-4665
Mounting Bracket

123914665
I010844: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-354-0130
Dust And Moisture Seal Protective Plug

123540130
350I18: RNCC: 3 | RNVC: 2
GPN350I18: RNCC: 5 | RNVC: 2

28 May 2001

5340-12-338-9634
Butt Hinge

123389634
10.02 20 01 5: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-12-335-3455
Headless Straight Rod

123353455
6700018-202200.01: RNCC: 2 | RNVC: 2
6700018-202200.01: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-12-702-8511
Support Hook

127028511
52-04066102897: RNCC: 2 | RNVC: 2

3 Jan 1996

5340-12-312-2999
Mending Plate

123122999
P-146245-406: RNCC: 3 | RNVC: 2
P146245-406: RNCC: 5 | RNVC: 2

11 Dec 1987

5340-12-168-6442
Loop Clamp

121686442
DIN3016-2-H1-50X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-H1-50X12-W1-2: RNCC: 3 | RNVC: 2
SPGU50/12SKZ: RNCC: 3 | RNVC: 2
1319005050: RNCC: 5 | RNVC: 2
SPGU50-12ZY: RNCC: 5 | RNVC: 2
DIN3016-H1-50X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-K50X12-W1: RNCC: 5 | RNVC: 9
VG95931K50X12W1: RNCC: 5 | RNVC: 9

25 Mar 1977

5340-12-148-2800
Loop Clamp

121482800
DIN3016-1-B1-67X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-B1-67X20-W1-2: RNCC: 3 | RNVC: 2
RS0.67/20: RNCC: 3 | RNVC: 2
RS67-20: RNCC: 5 | RNVC: 2
RS67/20: RNCC: 5 | RNVC: 2
4100020067: RNCC: 5 | RNVC: 2
VG95931-B67X20-W1: RNCC: 5 | RNVC: 9
VG95931B67X20W1: RNCC: 5 | RNVC: 9
DIN3016-B1-67X20-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-387-4000
Mechanic Equipment Hardware Kit

123874000
5803674-215000.00: RNCC: 2 | RNVC: 2

9 Dec 2011

5340-12-388-9457
Mending Plate

123889457
81974870524: RNCC: 3 | RNVC: 2
81.97487-0524: RNCC: 5 | RNVC: 2

9 May 2012

5340-12-168-5015
Window Regulator Handle

121685015
81753406001: RNCC: 3 | RNVC: 2
WN1156: RNCC: 5 | RNVC: 2
WN1156-050: RNCC: 5 | RNVC: 2
81.75340-6001: RNCC: 5 | RNVC: 2
101256801: RNCC: 5 | RNVC: 2

15 Mar 1977

5340-12-360-2693
Loop Clamp

123602693
230.6005: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-12-391-6904
Loop Clamp

123916904
81 241.691: RNCC: 3 | RNVC: 2
0009952614: RNCC: 5 | RNVC: 2

27 Mar 2013

5340-12-346-4767
Spacing Threaded Standoff

123464767
5.12.113: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-12-370-5347
Multiple Angle Bracket

123705347
54.1094.676.01: RNCC: 3 | RNVC: 2

17 Nov 2006

5340-12-314-1236
Loop Clamp

123141236
6204921240: RNCC: 3 | RNVC: 2
620 492 12 40: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-128-6257

5340-12-362-8640
Nonmetallic Bumper

123628640
16001647: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-12-197-2225
Mending Plate

121972225
075-104032-400: RNCC: 3 | RNVC: 2

3 Oct 1983

5340-12-344-3172
Mending Plate

123443172
111G10011: RNCC: 3 | RNVC: 2
111 G10 011 E1: RNCC: 5 | RNVC: 2

15 Oct 1997

5340-12-386-3485
Access Cover

123863485
04152787: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-12-374-2904
Loop Clamp

123742904
5543196: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-375-5858
Mechanic Equipment Hardware Kit

123755858
1290106406: RNCC: 3 | RNVC: 2

16 Jun 2008

5340-12-334-3680
Multiple Angle Bracket

123343680
1676676400: RNCC: 3 | RNVC: 2
16766764: RNCC: 5 | RNVC: 2

2 May 1994

5340-12-384-2905
Spacing Threaded Standoff

123842905
9259244000: RNCC: 3 | RNVC: 2
9259244000: RNCC: 5 | RNVC: 2
23896: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-12-369-0032
Electrical-Mechanical Equipment Post

123690032
05.16.309: RNCC: 3 | RNVC: 2
7804982513: RNCC: 5 | RNVC: 2

11 May 2006

5340-12-334-5994
Angle Bracket

123345994
15 0004 459: RNCC: 2 | RNVC: 2
15 0004 459: RNCC: 3 | RNVC: 2

27 May 1994

5340-12-004-3605

5340-12-375-4522
Butt Hinge

123754522
87562: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-12-132-9625
Retaining Strap

121329625
4049950119: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-358-0653
Nut And Bolt Locking Plate

123580653
2300042-255600.006: RNCC: 2 | RNVC: 2
2300042-255600.006: RNCC: 3 | RNVC: 2

9 Sep 2002

5340-12-358-9346
Spacing Threaded Standoff

123589346
300.009.984: RNCC: 2 | RNVC: 2
300.009.984: RNCC: 3 | RNVC: 2

29 Nov 2002

5340-12-363-2909
Rim Latch

123632909
599.076.007.019: RNCC: 3 | RNVC: 2
81971500040: RNCC: 5 | RNVC: 2

20 May 2004

5340-12-314-1246
Mounting Bracket

123141246
6205410416: RNCC: 3 | RNVC: 2
620 541 04 16: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-390-0393
Loop Clamp

123900393
312212: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-309-2600
Mending Plate

123092600
KM.S01-211200.002: RNCC: 3 | RNVC: 2

7 Jan 1987

5340-12-319-8422
Webbing Strap

123198422
4900288-230200.00: RNCC: 2 | RNVC: 2
4312 711 28240: RNCC: 3 | RNVC: 2

9 Nov 1989

5340-12-199-7421
Angle Bracket

121997421
5801998-180000.01: RNCC: 2 | RNVC: 2
5801998-180000.01: RNCC: 3 | RNVC: 2
5801998-180000.01: RNCC: 5 | RNVC: 9

26 May 1984

5340-12-302-1893
Flush Lock

123021893
0860 02436: RNCC: 3 | RNVC: 2
86002436: RNCC: 5 | RNVC: 2
86002436KZ5511-04: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-340-0891
Loop Clamp

123400891
V6530-00003-048: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-177-8298
Mounting Bracket

121778298
5801605-100000-004: RNCC: 2 | RNVC: 2
4704315: RNCC: 3 | RNVC: 2
5801605-100000.004: RNCC: 5 | RNVC: 9
5801605-100000-004: RNCC: 5 | RNVC: 9

28 Feb 1979

5340-12-702-8549
Mounting Bracket

127028549
53-04045004294: RNCC: 2 | RNVC: 2

4 Jan 1996

5340-12-190-5896
Metal Runner

121905896
NO PRIMARY REF 12-190-5896: RNCC: 3 | RNVC: 2
7531 137205: RNCC: 5 | RNVC: 9
7531137205: RNCC: 5 | RNVC: 9

7 Dec 1981

5340-12-155-6957
Turnbuckle

121556957
403246-246: RNCC: 3 | RNVC: 2
G5-20-603-0A: RNCC: 5 | RNVC: 2
M309T4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-5798
Pipe Bracket

123015798
4173947: RNCC: 3 | RNVC: 2
1246-048: RNCC: 5 | RNVC: 2

25 Oct 1984

5340-12-302-6514
Webbing Strap

123026514
DAN80-2: RNCC: 3 | RNVC: 2

21 Jan 1985

5340-12-338-6723
Turnbuckle

123386723
S-17045-3/31: RNCC: 3 | RNVC: 2

14 Aug 1995

5340-12-319-5495
Support Hook

123195495
2782-360000.001.0: RNCC: 2 | RNVC: 2
2782-360000.001.0: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-12-386-1082
Frame Se Connector

123861082
2481-396510.000.0: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-12-358-3172
Angle Bracket

123583172
58R059-8461-3: RNCC: 2 | RNVC: 2
58R059-8461-3: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-12-338-1584
Mounting Bracket

123381584
14998-860: RNCC: 3 | RNVC: 2

30 May 1995

5340-12-374-9947
Mounting Plate

123749947
2 0000-552: RNCC: 3 | RNVC: 2
2 0000-552: RNCC: 5 | RNVC: 2

10 Apr 2008

5340-12-164-5676

5340-12-149-7930
Buckle

121497930
TL8465-0069-530007: RNCC: 2 | RNVC: 2
8465-0069-530007: RNCC: 5 | RNVC: 2
530007: RNCC: 5 | RNVC: 9
8465-069-530007: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-5845
Mending Plate

123165845
510252-0582.000: RNCC: 3 | RNVC: 2
510252-0582: RNCC: 5 | RNVC: 2

26 Jan 1989

5340-12-194-0120
Retaining Clip

121940120
23111-9406.07: RNCC: 3 | RNVC: 2
23111-9406-07: RNCC: 5 | RNVC: 9
23111-9406.07: RNCC: 5 | RNVC: 9
23111-9406.07: RNCC: 5 | RNVC: 9
23111-9406-07: RNCC: 5 | RNVC: 9

23 Sep 1982

5340-12-702-0041
Loop Clamp

127020041
VG95211-ML-127020041: RNCC: 2 | RNVC: 2
1667S50-63: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-142-5380
Recess Handle

121425380
6100129-147: RNCC: 2 | RNVC: 2
1071091: RNCC: 5 | RNVC: 2
1071091EY8935-38: RNCC: 5 | RNVC: 2
61014-50-40: RNCC: 5 | RNVC: 2
950000-502894: RNCC: 5 | RNVC: 2
61014-50-40: RNCC: 5 | RNVC: 2
FT6100129-147: RNCC: 5 | RNVC: 2
AR6399PT5T07: RNCC: 5 | RNVC: 9
6100008-50-31: RNCC: 5 | RNVC: 9
61014-50-40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-385-6879
Rod End Clevis

123856879
F1.4211-50-30-00.00-51: RNCC: 3 | RNVC: 2

30 Jun 2011

5340-12-311-5759
Lock-Release Lever

123115759
53.1847.052-01: RNCC: 3 | RNVC: 2

21 Sep 1987

5340-12-188-6106
Electrical-Mechanical Equipment Post

121886106
VG95148B7XM4X20-ST: RNCC: 2 | RNVC: 2
5.04.201AUSFA: RNCC: 3 | RNVC: 2
VG95148B7XM4X20-ST: RNCC: 3 | RNVC: 2
5-04-201AUSFA: RNCC: 5 | RNVC: 2
5.04.201: RNCC: 5 | RNVC: 2

21 Jul 1981

5340-12-700-2997
Detent Plunger

127002997
51-200703004: RNCC: 2 | RNVC: 2
2A28/2-4: RNCC: 3 | RNVC: 2
2A28-2-4: RNCC: 5 | RNVC: 9

4 Dec 1991

5340-12-378-5320
Dust And Moisture Seal Protective Cap-Plug

123785320
D0124760-001: RNCC: 3 | RNVC: 2

17 Apr 2009

5340-12-313-0858
Support Hook

123130858
P-896155-001: RNCC: 3 | RNVC: 2
P896155-001: RNCC: 5 | RNVC: 2

3 Mar 1988

5340-12-339-2209
Angle Bracket

123392209
279.614 340: RNCC: 3 | RNVC: 2
279.614 340: RNCC: 5 | RNVC: 2

26 Oct 1995

5340-12-333-7572
Casement Fastener

123337572
15 0004 723: RNCC: 2 | RNVC: 2
15 0004 723: RNCC: 3 | RNVC: 2
150004723: RNCC: 5 | RNVC: 2

2 Feb 1994

5340-12-372-5572
Helical Compression Spring Retainer

123725572
716E02025: RNCC: 3 | RNVC: 2
716E02025E2: RNCC: 5 | RNVC: 9

27 Jul 2007

5340-12-010-3707

5340-12-191-7317
Resilient Mount

121917317
0118 708/102-13MN55: RNCC: 3 | RNVC: 2
0118 708/102: RNCC: 5 | RNVC: 2
0118-708-102-13MN55: RNCC: 5 | RNVC: 2
4603525014: RNCC: 5 | RNVC: 2
5261-04: RNCC: 5 | RNVC: 2
721 1 34 006 2: RNCC: 5 | RNVC: 9
121917317: RNCC: 6 | RNVC: 9

1 Mar 1982

5340-12-124-0232
Expansion Plug

121240232
DIN470-16-ST-PHR: RNCC: 2 | RNVC: 2
16DIN470PHR: RNCC: 5 | RNVC: 2
16DIN470PHRE: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-700-8767
Loop Clamp

127008767
1667S-50-32: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-0235
Loop Clamp

127020235
VG95211-ML-127020235: RNCC: 2 | RNVC: 2
200N7-280: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-165-5129
Door Handle

121655129
593B012: RNCC: 3 | RNVC: 2
7101-11-14-09: RNCC: 5 | RNVC: 2
7101-11-14.09: RNCC: 5 | RNVC: 2
161435304: RNCC: 5 | RNVC: 2
7101-11-14-09: RNCC: 5 | RNVC: 9
7101-11-14.09: RNCC: 5 | RNVC: 9

25 May 1976

5340-12-336-7300
Double Angle Bracket

123367300
4900017-01.003: RNCC: 3 | RNVC: 2
4900017-01-003: RNCC: 5 | RNVC: 9

14 Dec 1994

5340-12-144-4088
Loop Clamp

121444088
2208228971: RNCC: 3 | RNVC: 2
7101-50-03-10: RNCC: 5 | RNVC: 2
7101-50-03.10: RNCC: 5 | RNVC: 2
E7101-50-03-10: RNCC: 5 | RNVC: 2
169620601: RNCC: 5 | RNVC: 2
E7101-50-03.10: RNCC: 5 | RNVC: 2
7101-50-03-10: RNCC: 5 | RNVC: 9
7101-50-03.10: RNCC: 5 | RNVC: 9
E7101-50-03-10: RNCC: 5 | RNVC: 9
E7101-50-03.10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-2927
Pad Eye

123082927
P-875153-001: RNCC: 3 | RNVC: 2
P875153-001: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-300-4509
Plug Button

123004509
E3-2005311: RNCC: 3 | RNVC: 2
E3-2005311: RNCC: 5 | RNVC: 9
E3-2005311: RNCC: 5 | RNVC: 9

2 Aug 1984

5340-12-377-7982
Lock-Release Lever

123777982
GN300.1-92-M12-25-SW: RNCC: 3 | RNVC: 2
ISTEC 4862-50: RNCC: 5 | RNVC: 2
GN300.1-92-M12-25-SW: RNCC: 5 | RNVC: 2
4862-50: RNCC: 5 | RNVC: 2
ORC-29-313: RNCC: 5 | RNVC: 2

11 Feb 2009

5340-12-701-2174
Mounting Bracket

127012174
VG95211-ML-127012174: RNCC: 2 | RNVC: 2
5.12.0605.0581.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-311-2535
Mending Plate

123112535
60682: RNCC: 3 | RNVC: 2
KB-60682-625: RNCC: 5 | RNVC: 9
60682-625: RNCC: 5 | RNVC: 9

11 Aug 1987

5340-12-364-5720
Snap Hook

123645720
DIN5299-A40NI: RNCC: 2 | RNVC: 2

12 Oct 2004

5340-12-351-4018
Nonmetallic Bumper

123514018
10063-214000.02: RNCC: 3 | RNVC: 2
10063-214000.02: RNCC: 5 | RNVC: 9

24 Jul 2000

5340-12-315-8857
Resilient Mount

123158857
DIN95363-D30X30-MVQ55ST: RNCC: 2 | RNVC: 2
81160-30X30-M8X20.MVQ55.ST: RNCC: 5 | RNVC: 2
4609880211: RNCC: 5 | RNVC: 2
VG95363-D30X30-MVQ55ST: RNCC: 5 | RNVC: 9

6 Dec 1988

5340-12-315-6106
Resilient Mount

123156106
H63-146-64-80-8-FF: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-12-358-1555
Snap-In Plain Standoff

123581555
2800-190200.014.0: RNCC: 2 | RNVC: 2
2800-190200.014.0: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-12-328-9745
Friction Catch Stud

123289745
2350-010203.000.0: RNCC: 2 | RNVC: 2
2350-010203.000.0: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-347-7246
Mounting Bracket

123477246
2300405-250709.000: RNCC: 2 | RNVC: 2
9914245: RNCC: 3 | RNVC: 2
2300405-250709.000: RNCC: 5 | RNVC: 2
9914245: RNCC: 5 | RNVC: 9
2300405-250709.000: RNCC: 5 | RNVC: 9

2 Feb 1999

5340-12-382-3512
Loop Clamp

123823512
053911627: RNCC: 3 | RNVC: 2

9 Jun 2010

5340-12-023-0395

5340-12-389-7021
Electronic Equipment Hardware Kit

123897021
01144412: RNCC: 3 | RNVC: 2

15 Aug 2012

5340-12-389-8553
Flush Lock

123898553
0326748: RNCC: 3 | RNVC: 2

31 Aug 2012

5340-12-358-2489
Angle Bracket

123582489
9455460582: RNCC: 3 | RNVC: 2
4428350012: RNCC: 5 | RNVC: 9

1 Oct 2002

5340-12-122-4116
Plain Solid Disk

121224116
3153570952: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-393-7622
Support Hook

123937622
RSM138C: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-315-6293
Catch Strike

123156293
3000-318110.10: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-12-090-1891

5340-12-151-4850
Friction Catch Stud

121514850
23111-9470.05: RNCC: 2 | RNVC: 2
23111-9470-05: RNCC: 5 | RNVC: 2
23111-9470.05: RNCC: 5 | RNVC: 2
23111-9470-05: RNCC: 5 | RNVC: 9
23111-9470-05: RNCC: 5 | RNVC: 9
23111-9470-05: RNCC: 5 | RNVC: 9
23111-9470.05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-348-9123
Rod End Clevis

123489123
245/7346-58-12-00: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-371-2882
Butt Hinge

123712882
3204-0002: RNCC: 2 | RNVC: 2
3204-0002: RNCC: 3 | RNVC: 2

9 Mar 2007

5340-12-169-3717
Spring Tension Clip

121693717
PAN3094-05: RNCC: 3 | RNVC: 2
PAN3094: RNCC: 5 | RNVC: 2

11 May 1977

5340-12-155-4511
Support Hook

121554511
VG95211-ML-121554511: RNCC: 2 | RNVC: 2
160-75553: RNCC: 3 | RNVC: 2
160-74378-68: RNCC: 5 | RNVC: 2
160-75553: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-187-1532
Detent Plunger

121871532
431271222790: RNCC: 3 | RNVC: 2
43127122279: RNCC: 5 | RNVC: 2
5801796-121000-02: RNCC: 5 | RNVC: 9
5801796-121000.02: RNCC: 5 | RNVC: 9

9 Mar 1981

5340-12-142-7720
Retaining Strap

121427720
110-030.05-016: RNCC: 3 | RNVC: 2
110E30-05-16: RNCC: 5 | RNVC: 9
110E3005-16: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-6884
Mounting Plate

127016884
VG95211-ML-127016884: RNCC: 2 | RNVC: 2
5.12.7220.2306.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-386-1790
Runner

123861790
2500262-194010.000.0: RNCC: 3 | RNVC: 2

15 Aug 2011

5340-12-390-5528
Angle Bracket

123905528
SK1179-977190.001.0: RNCC: 3 | RNVC: 2
7121715: RNCC: 5 | RNVC: 2

23 Nov 2012

5340-12-375-7380
Mounting Plate

123757380
2300245-150000.01.0: RNCC: 2 | RNVC: 2
2300245-150000.01.0: RNCC: 3 | RNVC: 2

1 Jul 2008

5340-12-703-2036
Mounting Bracket

127032036
VG95211-ML-127032036: RNCC: 2 | RNVC: 2
5.12.5111.5334.98: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-702-3930
Rod End Connector

127023930
VG95211-ML-127023930: RNCC: 2 | RNVC: 2
5.12.5302.1518.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-340-8639
Mounting Plate

123408639
906911-3000: RNCC: 3 | RNVC: 2
9069113000: RNCC: 5 | RNVC: 2

25 Jun 1996

5340-12-380-8378
Mounting Bracket

123808378
2W112AD010-2100: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-338-8869
Angle Bracket

123388869
4900319-104200.01: RNCC: 2 | RNVC: 2
4900319-104200.01: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-12-188-8074
Rod End Clevis

121888074
DIN71752-G5X20-9SMN28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G5X20-9SMNPB28K-A3C: RNCC: 2 | RNVC: 2
DIN71752-G5X20-A3P: RNCC: 2 | RNVC: 2
DIN71752-G5X20-A3P: RNCC: 3 | RNVC: 2
DIN71752-G5X20-A3P: RNCC: 3 | RNVC: 2
100200050020/024: RNCC: 3 | RNVC: 2
G5X20DIN71752: RNCC: 5 | RNVC: 2
DIN71752-G5X20: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-317-3237
Access Cover

123173237
4900064-41231.001: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-184-3882
Mounting Bracket

121843882
5801357-1850-01F: RNCC: 2 | RNVC: 2
5801357-1850-01F: RNCC: 5 | RNVC: 2
5801357-1850-01F: RNCC: 5 | RNVC: 2

22 Jul 1980

5340-12-198-9899
Bow Handle

121989899
C42300-A67-B47: RNCC: 3 | RNVC: 2

20 Mar 1984

5340-12-307-8471
Quick Release Plunger

123078471
510252-8306.000: RNCC: 3 | RNVC: 2
51 02 52-8306: RNCC: 5 | RNVC: 2
510252-8306: RNCC: 5 | RNVC: 2

1 Aug 1986

5340-12-338-7273
Lock-Release Lever

123387273
6700017-202920.00: RNCC: 2 | RNVC: 2
6700017-202920.00: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-12-142-4360
Spring Tension Clip

121424360
11327: RNCC: 3 | RNVC: 2
784616: RNCC: 5 | RNVC: 2
1519-8000-0101: RNCC: 5 | RNVC: 2
176-958: RNCC: 5 | RNVC: 2
269012060089: RNCC: 5 | RNVC: 2
269012060089: RNCC: 5 | RNVC: 2
01-359: RNCC: 5 | RNVC: 2
11327SCHWARZ: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-367-0014
Extension Drawer Slide Section

123670014
42-0015: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-12-369-4442
Mechanic Equipment Hardware Kit

123694442
A70-0006: RNCC: 3 | RNVC: 2

5 Jul 2006

5340-12-327-8998
Mending Plate

123278998
C42080-A35-C13: RNCC: 2 | RNVC: 2
C42080-A35-C13: RNCC: 3 | RNVC: 2

18 Mar 1992

5340-12-188-7630
Expansion Shield

121887630
06.24249.0007: RNCC: 3 | RNVC: 2
201-GDO444-00: RNCC: 5 | RNVC: 2
06242490007: RNCC: 5 | RNVC: 2

28 Jul 1981

5340-12-701-9940
Loop Clamp

127019940
VG95211-ML-127019940: RNCC: 2 | RNVC: 2
155N464-532: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-332-7341
Hinge Torsion Bar

123327341
00098390940: RNCC: 3 | RNVC: 9
9839094: RNCC: 5 | RNVC: 9
328-182300.012: RNCC: 5 | RNVC: 9

13 Sep 1993

5340-12-388-2387
Clamping Catch

123882387
GN843-150-AS: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-12-197-6416
Headless Straight Rod

121976416
4092201: RNCC: 3 | RNVC: 2

10 Nov 1983

5340-12-317-1434
Access Door

123171434
400176279: RNCC: 2 | RNVC: 2
400176279: RNCC: 3 | RNVC: 2

14 Mar 1989

5340-12-197-0751
Door Hook

121970751
4357407116: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-12-024-8114

5340-12-316-1557
Dust And Moisture Seal Protective Plug

123161557
4609975035: RNCC: 3 | RNVC: 2
721 1 66 156 1: RNCC: 5 | RNVC: 9

24 Dec 1988

5340-12-349-7964
Dust And Moisture Seal Protective Cap

123497964
31 42 2 330 541: RNCC: 3 | RNVC: 2

10 Jan 2000

5340-12-379-9990
Door Button

123799990
120D153620.002.0: RNCC: 3 | RNVC: 2

17 Sep 2009

5340-12-363-6531
Mounting Bracket

123636531
2300147-501400.001.0: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-12-378-2963
Mounting Bracket

123782963
2300232-826820.000.0: RNCC: 2 | RNVC: 2
2300232-826820.000.0: RNCC: 3 | RNVC: 2
1270868: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-12-347-4894
T Bracket

123474894
88.8281.5204: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-12-353-3631
Loop Clamp

123533631
RANR2-3 3/4: RNCC: 3 | RNVC: 2

15 Mar 2001

5340-12-372-4530
Mounting Bracket

123724530
11251217700: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-12-194-4670
Pipe Bracket

121944670
A-616776-401: RNCC: 3 | RNVC: 2
A616776-401: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-12-174-0451
Bridge Clamp

121740451
8403459: RNCC: 3 | RNVC: 2
0047-669: RNCC: 5 | RNVC: 2
0047669: RNCC: 5 | RNVC: 2

6 Jun 1978

5340-12-381-1388
Bumper

123811388
6.339-057.0: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-12-371-5572
Retaining Bail

123715572
SK861-182025.001.0: RNCC: 3 | RNVC: 2
1705481: RNCC: 5 | RNVC: 9

18 Apr 2007

5340-12-325-6260
Angle Bracket

123256260
5801984-981110.004.0: RNCC: 2 | RNVC: 2
5801984-981110.004.0: RNCC: 3 | RNVC: 2

24 Jun 1991

5340-12-185-2290
Manual Control Handle

121852290
525241056: RNCC: 3 | RNVC: 2
5801416-359: RNCC: 5 | RNVC: 9

23 Sep 1980

5340-12-158-1309
Case Corner

121581309
31146: RNCC: 3 | RNVC: 2
5800357-801000-15: RNCC: 5 | RNVC: 9
5800357-801000.15: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-7044
Multiple Angle Bracket

123127044
4200081-151300.001: RNCC: 3 | RNVC: 2
4200081-151300.001: RNCC: 5 | RNVC: 9
9844883: RNCC: 5 | RNVC: 9
4200081-151300.001: RNCC: 5 | RNVC: 9

28 Jan 1988

5340-12-701-6526
Retaining Strap

127016526
VG95211-ML-127016526: RNCC: 2 | RNVC: 2
5.12.7207.1001.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-2397
Helical Compression Spring Seat

123422397
11200720128: RNCC: 3 | RNVC: 2
11.20072-0128: RNCC: 5 | RNVC: 2
11200720128: RNCC: 5 | RNVC: 2
200.07.051: RNCC: 5 | RNVC: 2

9 Jan 1997

5340-12-343-6687
Angle Bracket

123436687
2300002-122660.001: RNCC: 2 | RNVC: 2
9914011: RNCC: 3 | RNVC: 2
2300002-122660.001: RNCC: 5 | RNVC: 2
2300002-122660.001: RNCC: 5 | RNVC: 9
9914011: RNCC: 5 | RNVC: 9

14 Jul 1997

5340-12-379-3627
Angle Bracket

123793627
0069308: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-12-360-1183
Threaded Rod End

123601183
8012.42.00: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-307-6875
Electrical-Mechanical Equipment Post

123076875
RP988619: RNCC: 3 | RNVC: 2

16 Jul 1986

5340-12-355-9268
Mounting Plate

123559268
1002000-3000: RNCC: 2 | RNVC: 2
1002000-3000: RNCC: 3 | RNVC: 2

7 Jan 2002

5340-12-305-5756
Double Angle Bracket

123055756
113748: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-306-7021
Rod End Clevis

123067021
79791: RNCC: 3 | RNVC: 2
024264: RNCC: 5 | RNVC: 2

21 Mar 1986

5340-12-173-8521
Retaining Strap

121738521
PAN4231EEEE7022: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-378-4122
Retaining Strap

123784122
05690204096: RNCC: 3 | RNVC: 2
41270052: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-12-320-1525
Webbing Strap

123201525
80 NO 20 117: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-12-390-0480
Electronic Equipment Hardware Kit

123900480
105-911517: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-309-7948
Mending Plate

123097948
1000104-212400.25: RNCC: 2 | RNVC: 2
1000104-212400.25: RNCC: 3 | RNVC: 2
1000104-212400.25: RNCC: 5 | RNVC: 9

3 Mar 1987

5340-12-378-6816
Handwheel

123786816
000215: RNCC: 3 | RNVC: 2
4046: RNCC: 5 | RNVC: 2
4046: RNCC: 5 | RNVC: 2

30 Apr 2009

5340-12-378-4256
Snap Hook

123784256
P20625: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-351-9370
Mounting Plate

123519370
CBD45301P02: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-12-367-7376
Mounting Bracket

123677376
630745289: RNCC: 3 | RNVC: 2

5 Oct 2005

5340-12-374-2768
Thumb Latch

123742768
153 6150-622: RNCC: 3 | RNVC: 2
153 6150-622: RNCC: 5 | RNVC: 2

5 Feb 2008

5340-12-366-0746
Dust And Moisture Seal Protective Plug

123660746
CBD45062P07: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-12-367-1137
Flush Lock

123671137
50459: RNCC: 3 | RNVC: 2

11 Jul 2005

5340-12-322-7378
Dust And Moisture Seal Protective Cap

123227378
A8200: RNCC: 3 | RNVC: 2
0014310287: RNCC: 5 | RNVC: 2

18 Sep 1990

5340-12-319-7399
Retaining Strap

123197399
631349770014: RNCC: 3 | RNVC: 9

30 Oct 1989

5340-12-385-1343
Runner

123851343
S005824TAN686A: RNCC: 3 | RNVC: 2

4 May 2011

5340-12-328-6302
Dust And Moisture Seal Protective Plug

123286302
491022: RNCC: 3 | RNVC: 2
0318581: RNCC: 5 | RNVC: 2
0019880335: RNCC: 5 | RNVC: 2
0318581: RNCC: 5 | RNVC: 2

10 Jun 1992

5340-12-364-5722
Support Hook

123645722
T251M3001206: RNCC: 2 | RNVC: 2
T251M3001206: RNCC: 3 | RNVC: 2

12 Oct 2004

5340-12-304-1245
Double Angle Bracket

123041245
5802161-642123.00: RNCC: 2 | RNVC: 2
5802161-642123.00: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-12-141-4470
Hand- Kurbel

5340-12-180-6768
Webbing Strap

121806768
R20230: RNCC: 3 | RNVC: 2
R20230: RNCC: 5 | RNVC: 9

26 Sep 1979

5340-12-346-9322
Angle Bracket

123469322
100000776: RNCC: 2 | RNVC: 2
100000776: RNCC: 3 | RNVC: 2

29 Sep 1998

5340-12-300-8486
Pipe Bracket

123008486
4255060340: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-359-8304
Dust And Moisture Seal Protective Cap

123598304
300.005.118: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-366-0659
Double Angle Bracket

123660659
76007: RNCC: 3 | RNVC: 2

4 Mar 2005

5340-12-316-9992
Mounting Bracket

123169992
2300279-9800.19: RNCC: 2 | RNVC: 2
2300279-9800.19: RNCC: 3 | RNVC: 2
2300279-9800.19: RNCC: 5 | RNVC: 9
9871742: RNCC: 5 | RNVC: 9

2 Mar 1989

5340-12-300-5449

5340-12-024-9649

5340-12-319-2685
Dust And Moisture Seal Protective Plug Set

123192685
9151840168: RNCC: 3 | RNVC: 2
610-U29/U19/U18/U8: RNCC: 5 | RNVC: 2
467-400/5184-02-13-00: RNCC: 5 | RNVC: 2

18 Sep 1989

5340-12-356-2623
Access Cover

123562623
2125-121423A04B: RNCC: 2 | RNVC: 2
2125-121423A04B: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-12-187-8196
Dust And Moisture Seal Protective Plug

121878196
TL-5-209: RNCC: 3 | RNVC: 2
898 011 380 4: RNCC: 5 | RNVC: 2
A5WN18: RNCC: 5 | RNVC: 2
898 010 470 4: RNCC: 5 | RNVC: 2

13 May 1981

5340-12-195-0055
Loop Clamp

121950055
DIN3016-1-D2-20-20-20X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-A20-20-20X15-W1-ZN2: RNCC: 3 | RNVC: 2
RSGU1.3X20/15: RNCC: 3 | RNVC: 2
4219315020: RNCC: 5 | RNVC: 2
RSGU1100.3X20/15: RNCC: 5 | RNVC: 2
RSGU1100-3X20-15: RNCC: 5 | RNVC: 2
DIN3016-A20-20-20X15-W1-ZN2: RNCC: 5 | RNVC: 9
DIN3016-D2-20-20-20X15-W1-2: RNCC: 5 | RNVC: 9

29 Dec 1982

5340-12-701-5923
Mounting Plate

127015923
VG95211-ML-127015923: RNCC: 2 | RNVC: 2
5.12.6501.0913.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-309-8148
Bail Handle

123098148
2-161/90X90 MM MIT 8MM STIFT: RNCC: 3 | RNVC: 2
216371: RNCC: 5 | RNVC: 2

6 Mar 1987

5340-12-317-9607
Electrical-Mechanical Equipment Post

123179607
VG95148B5,5XM3X8,5-ST: RNCC: 2 | RNVC: 2
VG95148B5,5XM3X8,5-ST: RNCC: 3 | RNVC: 2
18 H 272: RNCC: 5 | RNVC: 2
18H272: RNCC: 5 | RNVC: 2

30 May 1989

5340-12-332-5564
Protection Bellows

123325564
V6-227 SIMRIT-CR: RNCC: 3 | RNVC: 2
V6-227: RNCC: 5 | RNVC: 2
2299.340: RNCC: 5 | RNVC: 2
91477887: RNCC: 5 | RNVC: 9

19 Aug 1993

5340-12-365-6301
Mounting Bracket

123656301
J21220032-401: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-167-3435
Resilient Mount

121673435
DIN95363-E15X20-M5X20-NR55ST: RNCC: 4 | RNVC: 1
515003-M5X20.NR55.ST: RNCC: 5 | RNVC: 2
5L6671-003-23: RNCC: 5 | RNVC: 2
BC4-43-25N: RNCC: 5 | RNVC: 9
VG95363-E15X20-M5X20-NR55ST: RNCC: 5 | RNVC: 9

14 Dec 1976

5340-12-312-3163
Detent Plunger

123123163
42466/0220-04: RNCC: 3 | RNVC: 2
42466022004: RNCC: 5 | RNVC: 2

15 Dec 1987

5340-12-176-1307
Angle Bracket

121761307
CF418058C: RNCC: 3 | RNVC: 2
536056-0229.000: RNCC: 3 | RNVC: 2
CF 418 058 C: RNCC: 5 | RNVC: 2
CF418058C: RNCC: 5 | RNVC: 2
CF 418 058 C: RNCC: 5 | RNVC: 2
CF 418 058 C: RNCC: 5 | RNVC: 2
CF418058C: RNCC: 5 | RNVC: 2
536056-0229.000: RNCC: 5 | RNVC: 9

9 Nov 1978

5340-12-702-5135
Rod End Connector

127025135
VG95211-ML-127025135: RNCC: 2 | RNVC: 2
5.51.6501.1380.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-385-2528
Dust And Moisture Seal Protective Cover

123852528
F1.1781-40-01-80.00-00: RNCC: 3 | RNVC: 2

13 May 2011

5340-12-135-1442
Webbing Strap

121351442
1063244: RNCC: 3 | RNVC: 2
07006-RAL6014-1100,0 MM LANG: RNCC: 3 | RNVC: 9
7006-RAL6014-1100,0 MM LANG: RNCC: 5 | RNVC: 9
VG61350-4-1100,0 MM LANG: RNCC: 5 | RNVC: 9
VG61350-4-6014-1100,0 MM LANG: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-1558
Mending Plate

123151558
DIN3015-L-AP-K-1-W1-ZN: RNCC: 2 | RNVC: 2
SP1A-ZN: RNCC: 3 | RNVC: 2
HRL1AP STMZN: RNCC: 3 | RNVC: 2
APK-A1-ZN: RNCC: 3 | RNVC: 2
DIN3015-LAP1-W1-ZN-K: RNCC: 5 | RNVC: 2
SP1A-ZN: RNCC: 5 | RNVC: 2
62640248: RNCC: 5 | RNVC: 2
APK-A1: RNCC: 5 | RNVC: 2
VG95932SP1-W1: RNCC: 5 | RNVC: 9

23 Sep 1988

5340-12-335-2576
Spacing Threaded Standoff

123352576
VG95148C5,5XM3X10-CUZN: RNCC: 2 | RNVC: 2
VG95148-C5,5XM3X10-CUZN: RNCC: 3 | RNVC: 2
18H2024: RNCC: 3 | RNVC: 2

1 Aug 1994

5340-12-166-6583
Resilient Mount

121666583
DIN95363-A9X12-M4X10-NR55ST: RNCC: 2 | RNVC: 2
500005-M4X10.NR55.ST: RNCC: 5 | RNVC: 2
81100-9X12-M4X10.NR55.ST: RNCC: 5 | RNVC: 2
C39123-F7-C1: RNCC: 5 | RNVC: 2
C39123F7C1: RNCC: 5 | RNVC: 2
AA2.21/25A: RNCC: 5 | RNVC: 9
VG95363-A9X12-M4X10-NR55ST: RNCC: 5 | RNVC: 9
AA2-21-25A: RNCC: 5 | RNVC: 9

30 Sep 1976

5340-12-701-7386
Mounting Bracket

127017386
VG95211-ML-127017386: RNCC: 2 | RNVC: 2
5.12.7611.0010.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-315-2610
Angle Bracket

123152610
5-514-0511: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-12-352-2743
Nut And Bolt Locking Plate

123522743
VG95211-ML-123522743: RNCC: 2 | RNVC: 2
160-88395-04: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-12-344-3741
Mounting Plate

123443741
A-296771-021: RNCC: 3 | RNVC: 2
A296771-021: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-342-8156
Retaining Strap

123428156
DIN1593-31ZN: RNCC: 2 | RNVC: 2
31DIN1593: RNCC: 5 | RNVC: 9
DIN1593-31: RNCC: 5 | RNVC: 9

7 Apr 1997

5340-12-301-2039
Double Angle Bracket

123012039
A-245476-753: RNCC: 3 | RNVC: 2
A245476-753: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-331-6844
Retaining Strap

123316844
DIN72573-2X4-ST-ZN: RNCC: 2 | RNVC: 2
DIN72573-2X4-ST: RNCC: 5 | RNVC: 2
DIN72573-2X4-ST-GALZN8: RNCC: 5 | RNVC: 2
DIN72573-2X4-ST-VERZINKT: RNCC: 5 | RNVC: 2

7 Jun 1993

5340-12-354-7521
Mounting Bracket

123547521
5.001-057.0: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-12-301-8887
Mending Plate

123018887
20-5220-099: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-178-9074
Electrical-Mechanical Equipment Post

121789074
C121-A44-C39: RNCC: 2 | RNVC: 2
VG95148B6XM3X15-NRST: RNCC: 2 | RNVC: 2
VG95148B6XM3X15-NRST: RNCC: 3 | RNVC: 2
C121-A44-C39: RNCC: 3 | RNVC: 2
C121A44C39: RNCC: 3 | RNVC: 2
C121-A44-C39: RNCC: 5 | RNVC: 2
C121A44C39: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-322-2302
Rod End Clevis

123222302
105-89956.13: RNCC: 3 | RNVC: 2
105-89956-13: RNCC: 5 | RNVC: 2

2 Aug 1990

5340-12-326-6026
Access Door

123266026
6100131-110900: RNCC: 2 | RNVC: 2

11 Oct 1991

5340-12-327-0114
Mounting Bracket

123270114
3818262114: RNCC: 3 | RNVC: 2

19 Nov 1991

5340-12-332-8003
Manual Control Handle

123328003
DIN99-L125-VERZINKT: RNCC: 2 | RNVC: 2
DIN99-L125-ZN: RNCC: 5 | RNVC: 2
L125DIN99-VERZINKT: RNCC: 5 | RNVC: 2

21 Sep 1993

5340-12-308-3688
Rod End Clevis

123083688
DIN71752-G6X12A2PMITES-BOLZENA2P: RNCC: 2 | RNVC: 2
DIN71752-G6X12A2PMITES-BOLZENA2P: RNCC: 3 | RNVC: 2
DIN71752-G6X12A2PMITES-BOLZENA2P: RNCC: 3 | RNVC: 2
AFKB100200068001/023: RNCC: 5 | RNVC: 2
272.323 678: RNCC: 5 | RNVC: 2
DIN71752-G6X12 MIT ES-BOLZEN: RNCC: 5 | RNVC: 2

2 Oct 1986

5340-12-168-5633
Double Angle Bracket

121685633
23176-186000.01.0: RNCC: 2 | RNVC: 2
23176-186000.01.0: RNCC: 3 | RNVC: 2
23176-186000.01.0: RNCC: 5 | RNVC: 2
23176-186000-01-0: RNCC: 5 | RNVC: 2
23176-186000-01-0: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-374-1792
Nonmetallic Bumper

123741792
467-327-5281-03-18-00: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-12-174-6581
Rim Lock

121746581
NO PRIMARY REF 12-174-6581: RNCC: 3 | RNVC: 2
760-20MM: RNCC: 5 | RNVC: 9

17 Jul 1978

5340-12-702-7095
Retaining Strap

127027095
25-08301008234: RNCC: 2 | RNVC: 2

5 Dec 1995

5340-12-318-7921
Strap Fastener Loop

123187921
5803667-15000: RNCC: 2 | RNVC: 2
7802004150: RNCC: 3 | RNVC: 2
5803667-15000: RNCC: 5 | RNVC: 2
78020 04150: RNCC: 5 | RNVC: 9

17 Aug 1989

5340-12-320-8440
Resilient Mount

123208440
2653-014230.00: RNCC: 1 | RNVC: 2
2653-014230.00: RNCC: 3 | RNVC: 2
2653-014230.00: RNCC: 3 | RNVC: 2
4515241398: RNCC: 3 | RNVC: 2
58040001: RNCC: 5 | RNVC: 9
2653-014230.00: RNCC: 5 | RNVC: 9

22 Feb 1990

5340-12-319-2052
Double Angle Bracket

123192052
4900064-41214: RNCC: 3 | RNVC: 2

13 Sep 1989

5340-12-318-8878
Angle Bracket

123188878
6100125-3000.003: RNCC: 2 | RNVC: 2
4110011839: RNCC: 3 | RNVC: 2

23 Aug 1989

5340-12-702-6470
Resilient Mount

127026470
VG95211-ML-127026470: RNCC: 2 | RNVC: 2
AP-3-9,00-P GOST 11679.1-76: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-367-8184
Hand Crank

123678184
909145003: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-12-176-9589
Mounting Bracket

121769589
3006MMR2020003: RNCC: 3 | RNVC: 2

3 Jan 1979

5340-12-343-5674
Retaining Strap

123435674
50041001080: RNCC: 3 | RNVC: 2
F300 0T 022 5773: RNCC: 6 | RNVC: 9

3 Jul 1997

5340-12-325-6558
Mounting Bracket

123256558
3002680040: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-12-365-6040
Mounting Bracket

123656040
9305533340: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-374-9781
Access Cover

123749781
279.666 634: RNCC: 2 | RNVC: 2
279.666 634: RNCC: 3 | RNVC: 2

10 Apr 2008

5340-12-180-3110
Webbing Strap

121803110
T10722: RNCC: 3 | RNVC: 2
T10722: RNCC: 5 | RNVC: 9

5 Sep 1979

5340-12-364-1554
Flush Lock

123641554
32 10 43 03: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-12-181-2915
Retaining Strap

121812915
0287 4637: RNCC: 3 | RNVC: 2
2874637: RNCC: 5 | RNVC: 2
2874637KZ0704-77: RNCC: 5 | RNVC: 2

12 Nov 1979

5340-12-366-8320
Lock-Release Lever

123668320
4610001004: RNCC: 3 | RNVC: 2
4610001004: RNCC: 3 | RNVC: 9

14 Jun 2005

5340-12-365-0215
Double Angle Bracket

123650215
5160-545000A03B: RNCC: 2 | RNVC: 2
5160-545000A03B: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-379-2515
Mounting Bracket

123792515
0105867: RNCC: 3 | RNVC: 2

8 Jul 2009

5340-12-322-1163
Dust And Moisture Seal Protective Cap-Plug Set

123221163
9000 8109: RNCC: 3 | RNVC: 2

25 Jul 1990

5340-12-193-0699
Slide Keeper

121930699
VE01457: RNCC: 3 | RNVC: 2
01342: RNCC: 5 | RNVC: 2
01457: RNCC: 5 | RNVC: 2

21 Jun 1982

5340-12-321-8811
Angle Bracket

123218811
4353310240: RNCC: 3 | RNVC: 2

5 Jul 1990

5340-12-341-8164
Helical Compression Spring Seat

123418164
047 406: RNCC: 3 | RNVC: 2
047406: RNCC: 5 | RNVC: 2
1-626-10-4: RNCC: 5 | RNVC: 2
47 406: RNCC: 5 | RNVC: 2
47406: RNCC: 5 | RNVC: 2

31 Oct 1996

5340-12-358-4431
Spacing Threaded Standoff

123584431
62582008: RNCC: 3 | RNVC: 2
191.700-012.4: RNCC: 5 | RNVC: 9

17 Oct 2002

5340-12-328-5339
Loop Clamp

123285339
2300039-267006.00.0: RNCC: 3 | RNVC: 2
2300039-267006-00-0: RNCC: 5 | RNVC: 9
2300039-267006.00.0: RNCC: 5 | RNVC: 9

28 May 1992

5340-12-318-0659
Nonmetallic Bumper

123180659
704-125190-000-0: RNCC: 3 | RNVC: 2

8 Jun 1989

5340-12-181-9994
Mounting Bracket

121819994
5801602-010100.002: RNCC: 2 | RNVC: 2
4544308: RNCC: 3 | RNVC: 2
5801602-010100-002: RNCC: 5 | RNVC: 9
5801602-010100.002: RNCC: 5 | RNVC: 9

4 Jan 1980

5340-12-324-8439
Retaining Strap

123248439
1018604: RNCC: 3 | RNVC: 2
NR.605/60: RNCC: 5 | RNVC: 2
736/60: RNCC: 5 | RNVC: 2

26 Mar 1991

5340-12-161-0622
Retaining Strap

121610622
160-25553-02: RNCC: 3 | RNVC: 2
160-25553-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-334-9093
Protection Bellows

123349093
0010949482: RNCC: 3 | RNVC: 2
V6-75: RNCC: 3 | RNVC: 2
V6-75-CR: RNCC: 5 | RNVC: 2
001 094 94 82: RNCC: 5 | RNVC: 2

1 Jul 1994

5340-12-311-5460
Nonmetallic Bumper

123115460
33019-003-001: RNCC: 3 | RNVC: 2
33019-03-01: RNCC: 5 | RNVC: 9

16 Sep 1987

5340-12-190-3150
Retaining Strap

121903150
1200037-115.003: RNCC: 3 | RNVC: 2
1200037-115-003: RNCC: 5 | RNVC: 2

19 Nov 1981

5340-12-366-6520
Angle Bracket

123666520
942472477: RNCC: 3 | RNVC: 2
0001-915.00.79.001-000: RNCC: 5 | RNVC: 2

19 May 2005

5340-12-184-9567
Butt Hinge

121849567
5801352-1711.00: RNCC: 2 | RNVC: 2
5801352-1711.00: RNCC: 3 | RNVC: 2
5801352-1711-00: RNCC: 5 | RNVC: 9
5801352-1711-00: RNCC: 5 | RNVC: 9
5801352-1711-00: RNCC: 5 | RNVC: 9

28 Aug 1980

5340-12-195-7353
Hand Crank

121957353
556-854100-090: RNCC: 3 | RNVC: 2

6 Apr 1983

5340-12-171-7225
Access Cover

121717225
490126-22000-01: RNCC: 3 | RNVC: 2

7 Nov 1977

5340-12-311-3050
Ball Socket Seat

123113050
DIN71804-B13-A3P: RNCC: 3 | RNVC: 2
DIN71804-B13-A3P: RNCC: 5 | RNVC: 9

14 Aug 1987

5340-12-702-5433
Blank Panel

127025433
VG95211-ML-127025433: RNCC: 2 | RNVC: 2
5.51.7210.0731.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-357-6238
Retaining Bail

123576238
0018106614: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-382-1153
Buckle

123821153
P112506: RNCC: 3 | RNVC: 2

10 May 2010

5340-12-332-6973
Loop Clamp

123326973
0910000001: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-12-321-6546
Access Cover

123216546
7672 040 305: RNCC: 3 | RNVC: 2
7672040305: RNCC: 5 | RNVC: 2
7672040305: RNCC: 5 | RNVC: 9

12 Jun 1990

5340-12-316-1505
Resilient Mount

123161505
1770279100: RNCC: 3 | RNVC: 2
0008910301: RNCC: 5 | RNVC: 2

24 Dec 1988

5340-12-094-0912

5340-12-327-6776
Electrical-Mechanical Equipment Post

123276776
CF 802 062 A: RNCC: 2 | RNVC: 2
CF 802 062 A: RNCC: 3 | RNVC: 2

18 Feb 1992

5340-12-306-0747
Access Cover

123060747
5801984-982100.002.0: RNCC: 2 | RNVC: 2
5801984-982100.002.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-353-7568
Spacing Threaded Standoff

123537568
5.05.151: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-306-4370
Webbing Strap

123064370
5801984-980620.000.0: RNCC: 2 | RNVC: 2
5801984-980620.000.0: RNCC: 3 | RNVC: 2

28 Feb 1986

5340-12-354-4732
Mounting Bracket

123544732
2300246-261780.05.0: RNCC: 2 | RNVC: 2
2300246-261780.05.0: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-12-376-4273
Bumper

123764273
6743250344: RNCC: 3 | RNVC: 2
A 674 325 03 44: RNCC: 5 | RNVC: 2

29 Sep 2008

5340-12-365-3916
Mounting Bracket

123653916
2500135-730213.000.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-328-3046
Mounting Plate

123283046
CF 344 310 A: RNCC: 2 | RNVC: 2
CF 344 310 A: RNCC: 3 | RNVC: 2

6 May 1992

5340-12-301-6150
Friction Catch

123016150
590B201: RNCC: 3 | RNVC: 2
3528370084: RNCC: 5 | RNVC: 2
590K0024-6: RNCC: 5 | RNVC: 2

26 Oct 1984

5340-12-166-1079
Loop Clamp

121661079
4-76521: RNCC: 3 | RNVC: 2

31 Jul 1976

5340-12-358-9313
Retaining Bail

123589313
2481-391700.003.0: RNCC: 2 | RNVC: 2
2481-391700.003.0: RNCC: 3 | RNVC: 2

29 Nov 2002

5340-12-702-9214
Angle Bracket

127029214
VG95211-ML-127029214: RNCC: 2 | RNVC: 2
5.12.6602.1411.05: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-197-7663
Mending Plate

121977663
A-145203-062: RNCC: 3 | RNVC: 2
A145203-062: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-358-1637
Runner

123581637
4055R-310425.000.0: RNCC: 2 | RNVC: 2
4055R-310425.000.0: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-12-378-6585
Sealing Plug Assembly

123786585
B11-0092-002: RNCC: 3 | RNVC: 2

29 Apr 2009

5340-12-339-8638
Angle Bracket

123398638
87-401.60-01.00-40: RNCC: 3 | RNVC: 2

25 Jan 1996

5340-12-327-1477
Double Angle Bracket

123271477
160-70075-26: RNCC: 3 | RNVC: 2
160-70075-26: RNCC: 5 | RNVC: 9

6 Dec 1991

5340-12-316-8871
Angle Bracket

123168871
01800-0000-01-05: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-12-380-2727
Bow Handle

123802727
102034: RNCC: 3 | RNVC: 2
3951-65: RNCC: 5 | RNVC: 2
53951000AALGE00: RNCC: 5 | RNVC: 2

14 Oct 2009

5340-12-334-9206
Metallic Bumper

123349206
4900347-200500.06: RNCC: 2 | RNVC: 2
4900347-200500.06: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-12-317-1669
Access Cover

123171669
C249-A11-C135: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-12-179-7653
Turnbuckle Body

121797653
DIN1479-SPM24-ST-B3C: RNCC: 2 | RNVC: 2
SP-DIN1479-M24-B3C: RNCC: 3 | RNVC: 2
SPM24DIN1479B3C: RNCC: 5 | RNVC: 1
SPM24DIN1479B3C: RNCC: 5 | RNVC: 2

30 Jul 1979

5340-12-356-6220
Mending Plate

123566220
2125-125120.19B: RNCC: 2 | RNVC: 2
2125-125120.19B: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-313-1275
Mending Plate

123131275
999701-121300.09: RNCC: 3 | RNVC: 2

5 Mar 1988

5340-12-702-9911
Dust And Moisture Seal Protective Cap

127029911
VG95211-ML-127029911: RNCC: 2 | RNVC: 2
KM-9220-31: RNCC: 3 | RNVC: 2
0500862645599: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-320-5567
Protection Bellows

123205567
374050: RNCC: 3 | RNVC: 9

24 Jan 1990

5340-12-359-0517
Manual Control Lever

123590517
0008370344: RNCC: 3 | RNVC: 2
92.263.41.405: RNCC: 5 | RNVC: 2

12 Dec 2002

5340-12-321-8342
Access Cover

123218342
409061770: RNCC: 3 | RNVC: 2
5806.2031: RNCC: 3 | RNVC: 2
409.061 770: RNCC: 5 | RNVC: 2
409.061 770RAL6031-F9: RNCC: 5 | RNVC: 9

2 Jul 1990

5340-12-372-7538
Loop Clamp

123727538
2237529972: RNCC: 3 | RNVC: 2
22 375 29 972: RNCC: 5 | RNVC: 2

17 Aug 2007

5340-12-371-9853
Section Block Clamp

123719853
01TC35592: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-12-351-3421
Strap Hinge

123513421
19002029: RNCC: 3 | RNVC: 2

17 Jul 2000

5340-12-351-0218
Access Cover

123510218
1677582: RNCC: 3 | RNVC: 2

15 Jun 2000

5340-12-347-4433
Retaining Clip

123474433
136511: RNCC: 3 | RNVC: 9

11 Dec 1998

5340-12-043-4156

5340-12-161-1439

5340-12-315-2000

5340-12-369-6606
Mounting Bracket

123696606
64012: RNCC: 3 | RNVC: 2

7 Aug 2006

5340-12-346-6420
Dust And Moisture Seal Protective Cap

123466420
53.1624.549.00: RNCC: 3 | RNVC: 2

20 Aug 1998

5340-12-331-4829
Loop Clamp

123314829
1518778118: RNCC: 3 | RNVC: 2
40029100: RNCC: 5 | RNVC: 2

10 May 1993

5340-12-334-2925
Rim Lock

123342925
2371 2112 00: RNCC: 3 | RNVC: 2
2371211200: RNCC: 5 | RNVC: 2

22 Apr 1994

5340-12-390-5526
Strap Fastener Loop

123905526
VE01414: RNCC: 3 | RNVC: 2
7121743: RNCC: 5 | RNVC: 2

23 Nov 2012

5340-12-373-7252
Angle Bracket

123737252
SK1121-187700.001.0: RNCC: 3 | RNVC: 2
1312721: RNCC: 5 | RNVC: 2

3 Dec 2007

5340-12-701-1857
Mounting Plate

127011857
VG95211-ML-127011857: RNCC: 2 | RNVC: 2
5.12.0420.1007.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-3117
Rod End Connector

127013117
VG95211-ML-127013117: RNCC: 2 | RNVC: 2
5.12.5101.6940.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-317-3573
Angle Bracket

123173573
991R18-2AF: RNCC: 3 | RNVC: 2
4073870: RNCC: 5 | RNVC: 2
0214 9200: RNCC: 5 | RNVC: 2
1418751: RNCC: 5 | RNVC: 2
V91E18-3: RNCC: 5 | RNVC: 9
4792440: RNCC: 5 | RNVC: 9

31 Mar 1989

5340-12-151-5032
Friction Catch

121515032
23111-4189.00: RNCC: 2 | RNVC: 2
23111-4189-00: RNCC: 5 | RNVC: 2
23111-4189.00: RNCC: 5 | RNVC: 2
23111-4189.00: RNCC: 5 | RNVC: 2
23111-4189-00: RNCC: 5 | RNVC: 9
23111-4189.00: RNCC: 5 | RNVC: 9
23111-4189-00: RNCC: 5 | RNVC: 9
23111-4189.00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-4461
Nonmetallic Bumper

123124461
VG95093-5X28X5-NBR65: RNCC: 2 | RNVC: 2
VG95093-5X28X5.NBR65.ST: RNCC: 3 | RNVC: 2
3098960097: RNCC: 5 | RNVC: 2

8 Jan 1988

5340-12-328-6436
Mending Plate

123286436
160-24570-64: RNCC: 3 | RNVC: 2
160-24570.64: RNCC: 5 | RNVC: 2
160-24570-64: RNCC: 5 | RNVC: 2
160-24570.64: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-12-375-0290
Mounting Bracket

123750290
279.665 135: RNCC: 2 | RNVC: 2
279.665 135: RNCC: 3 | RNVC: 2

15 Apr 2008

5340-12-301-9430
Nonmetallic Bumper

123019430
20-4220-091: RNCC: 3 | RNVC: 2

20 Nov 1984

5340-12-311-5760
Lock-Release Lever

123115760
53.1847.052-02: RNCC: 3 | RNVC: 2

21 Sep 1987

5340-12-340-1556
Nonmetallic Bumper

123401556
81437060030: RNCC: 3 | RNVC: 2
1748137004: RNCC: 5 | RNVC: 2
81.43706-0030: RNCC: 5 | RNVC: 2

7 Mar 1996

5340-12-190-2754
Butt Hinge Leaf

121902754
12729-15200.001: RNCC: 2 | RNVC: 2
150829: RNCC: 3 | RNVC: 2
12729-15200-001: RNCC: 5 | RNVC: 2
12729-15200.001: RNCC: 5 | RNVC: 2
12729-15200.001: RNCC: 5 | RNVC: 9

17 Nov 1981

5340-12-341-8315
Dust And Moisture Seal Protective Plug

123418315
11.44788-0035: RNCC: 3 | RNVC: 2
11.44788-0035: RNCC: 5 | RNVC: 2
447.06.003: RNCC: 5 | RNVC: 2
F11.44788-0035: RNCC: 5 | RNVC: 2

31 Oct 1996

5340-12-384-0947
Mechanical Stop

123840947
5981-180000.011.0: RNCC: 2 | RNVC: 2
5981-180000.011.0: RNCC: 3 | RNVC: 2

20 Jan 2011

5340-12-321-2519
Helical Compression Spring Seat

123212519
23290-041120.010: RNCC: 2 | RNVC: 2
23290-041120.010: RNCC: 3 | RNVC: 2
23290-041120.010: RNCC: 5 | RNVC: 9
9852257: RNCC: 5 | RNVC: 9

24 Apr 1990

5340-12-360-9404
Mounting Bracket

123609404
2300232-060000.003.0: RNCC: 2 | RNVC: 2
2300232-060000.003.0: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-330-7034
Webbing Strap

123307034
01155-2-SCHLAUFE -FE60-LE1030MM: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-1090-0060: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-1090-60: RNCC: 3 | RNVC: 2
6.373-464.0: RNCC: 5 | RNVC: 2
6.373-464: RNCC: 5 | RNVC: 9
DIN60060-2-25X60X1030-C3/SCHLAUF: RNCC: 5 | RNVC: 9
79057/SCHLAUFE-1090-0060: RNCC: 5 | RNVC: 9

28 Jan 1993

5340-12-348-4809
Mounting Bracket

123484809
2300103-262033.00.0: RNCC: 3 | RNVC: 2
2300103-262033-00-0: RNCC: 5 | RNVC: 9

29 Jun 1999

5340-12-353-1967
Dust And Moisture Seal Protective Plug

123531967
01.05138: RNCC: 3 | RNVC: 2
7346-3-01-05138: RNCC: 5 | RNVC: 2

8 Feb 2001

5340-12-195-6574
Loop Clamp

121956574
DIN3016-2-G1-81X15-W5: RNCC: 2 | RNVC: 2
DIN3016-G1-81X15-W5: RNCC: 3 | RNVC: 2
SP81/15SKZ-W5: RNCC: 3 | RNVC: 2
1410700081: RNCC: 5 | RNVC: 2
SP81-15SKZ1-4571: RNCC: 5 | RNVC: 2
SP81/15SKZ-1.4571: RNCC: 5 | RNVC: 2
DIN3016-G1-81X15-W5: RNCC: 5 | RNVC: 9
VG95931-G81X15-1.4571: RNCC: 5 | RNVC: 9
VG95931-G81X15-W5: RNCC: 5 | RNVC: 9

24 Mar 1983

5340-12-369-5093
Manual Control Lever

123695093
1505057: RNCC: 3 | RNVC: 2
15004372: RNCC: 5 | RNVC: 2
548-140400.05.0: RNCC: 5 | RNVC: 2

13 Jul 2006

5340-12-197-6396
Resilient Mount

121976396
8798990025: RNCC: 3 | RNVC: 9
8798990025: RNCC: 5 | RNVC: 2
7-679-0221: RNCC: 5 | RNVC: 2

10 Nov 1983

5340-12-354-8322
Mechanical Stop

123548322
5400049-111827.01: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-050-2966

5340-12-384-6892
Runner

123846892
S002982: RNCC: 3 | RNVC: 2

18 Mar 2011

5340-12-316-9752
Mounting Plate

123169752
1821350013: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-130-6496
Nut And Bolt Retainer

121306496
3049940020: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-374-7227
Dust And Moisture Seal Protective Cap-Plug

123747227
119108: RNCC: 3 | RNVC: 2
7055136: RNCC: 5 | RNVC: 2

11 Mar 2008

5340-12-183-5532
Rod End Clevis

121835532
020072001: RNCC: 3 | RNVC: 2
02 707 5301: RNCC: 5 | RNVC: 2

26 Apr 1980

5340-12-305-5758
Mending Plate

123055758
113737: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-389-8468
Protection Bellows

123898468
1656658: RNCC: 3 | RNVC: 2
1656658: RNCC: 5 | RNVC: 2
81674050038: RNCC: 5 | RNVC: 2

30 Aug 2012

5340-12-388-0325
Access Cover

123880325
5840910103: RNCC: 3 | RNVC: 2

17 Feb 2012

5340-12-319-4536
Catch Strike

123194536
0368602: RNCC: 3 | RNVC: 2

3 Oct 1989

5340-12-010-7466

5340-12-159-6179
Retaining Clip

121596179
011540: RNCC: 3 | RNVC: 2
279-41620: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-375-3939
Catch Strike

123753939
2 0094-247: RNCC: 3 | RNVC: 2
2 0094-247: RNCC: 5 | RNVC: 2

28 May 2008

5340-12-356-3684
Mounting Bracket

123563684
2300231-350000.001.0: RNCC: 2 | RNVC: 2
2300231-350000.001.0: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-329-8716
Expansion Shield

123298716
4-127-0032: RNCC: 3 | RNVC: 2

8 Oct 1992

5340-12-330-9255
Angle Bracket

123309255
480-7347-12-21-00: RNCC: 3 | RNVC: 2
480/7347-12-21-00: RNCC: 5 | RNVC: 2

26 Feb 1993

5340-12-379-5314
Clamping Catch

123795314
GN852-1400-T2: RNCC: 3 | RNVC: 2

4 Aug 2009

5340-12-148-2282
Spring Tension Clip

121482282
25 888-001: RNCC: 3 | RNVC: 2
25888-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-311-2457
Flush Lock

123112457
1000-U155-U3-13-990: RNCC: 3 | RNVC: 2
02966010/02611030/02005480: RNCC: 3 | RNVC: 2
200-9003-9104-0428-0002: RNCC: 3 | RNVC: 2
1000-U155-U3-13: RNCC: 5 | RNVC: 2

7 Aug 1987

5340-12-311-0982
Angle Bracket

123110982
5801609-1890.01: RNCC: 2 | RNVC: 2
5801609-1890.01: RNCC: 3 | RNVC: 2
5801609-1890.01: RNCC: 5 | RNVC: 9

27 Jul 1987

5340-12-367-5882
Dust And Moisture Seal Protective Cap-Plug

123675882
A28-0003: RNCC: 3 | RNVC: 2

7 Sep 2005

5340-12-702-0311
Dust And Moisture Seal Protective Cap

127020311
VG95211-ML-127020311: RNCC: 2 | RNVC: 2
23 OST1 10481-72: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-339-0365
Spring Tension Clip

123390365
01-3241: RNCC: 3 | RNVC: 2
13500: RNCC: 5 | RNVC: 2
0059883778: RNCC: 5 | RNVC: 2

29 Sep 1995

5340-12-341-1847
Nonmetallic Bumper

123411847
160-30119-14: RNCC: 3 | RNVC: 2
15160-30119.14: RNCC: 5 | RNVC: 2
160-30119-14: RNCC: 5 | RNVC: 9

6 Aug 1996

5340-12-188-8034
Mending Plate

121888034
5801216-1200.02: RNCC: 3 | RNVC: 2
5801216-1200-02: RNCC: 5 | RNVC: 2
5801216-1200-02: RNCC: 5 | RNVC: 9
5801216-1200.02: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-306-9797
Bow Handle

123069797
5400026-5300: RNCC: 2 | RNVC: 2
5400026-5300: RNCC: 5 | RNVC: 2

23 Apr 1986

5340-12-702-4398
Butt Hinge

127024398
VG95211-ML-127024398: RNCC: 2 | RNVC: 2
5.51.0236.0220.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-3288
Mounting Bracket

127013288
VG95211-ML-127013288: RNCC: 2 | RNVC: 2
5.12.5104.0030.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-354-6127
Mounting Plate

123546127
5.001-420.0: RNCC: 3 | RNVC: 2

8 Aug 2001

5340-12-190-7195
Extension Drawer Slide Section

121907195
NO PRIMARY REF 12-190-7195: RNCC: 3 | RNVC: 2
6935132727: RNCC: 5 | RNVC: 9
6935 132727: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-701-5633
Mounting Bracket

127015633
VG95211-ML-127015633: RNCC: 2 | RNVC: 2
5.12.6114.3190.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-158-7092
Loop Clamp

121587092
DIN3016-1-E2-10-16X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU0.10-16/15: RNCC: 3 | RNVC: 2
DIN3016-E2-10-16X15-W1-2: RNCC: 3 | RNVC: 2
RSGU10-16-15: RNCC: 5 | RNVC: 2
4209105010: RNCC: 5 | RNVC: 2
RSGU10-16/15: RNCC: 5 | RNVC: 2
DIN3016-E2-10-16X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-5991
Access Cover

123025991
1-2650-14-2: RNCC: 2 | RNVC: 2
1-2650-14-2: RNCC: 3 | RNVC: 2
1-2650-14-2,L=2290: RNCC: 5 | RNVC: 9
1-2650-14-2,L=2290: RNCC: 5 | RNVC: 9

16 Jan 1985

5340-12-151-5445
Retaining Strap

121515445
SN78550-B18-ST-A3G-F: RNCC: 3 | RNVC: 2
1044273-VERZINKT: RNCC: 3 | RNVC: 2
1044273VERNICKELT: RNCC: 3 | RNVC: 2
B18SHN78550: RNCC: 5 | RNVC: 2
H78550-B180-S3: RNCC: 5 | RNVC: 2
1044273VERZINKT: RNCC: 5 | RNVC: 2
H78850B180: RNCC: 5 | RNVC: 2
WN7855B18VERNICKELT: RNCC: 5 | RNVC: 2
B18SN78550: RNCC: 5 | RNVC: 2
H78550-B180: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-702-9242
Angle Bracket

127029242
VG95211-ML-127029242: RNCC: 2 | RNVC: 2
5.12.7221.8160.00: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-186-2910
Dust And Moisture Seal Protective Plug

121862910
512206-4902.000: RNCC: 3 | RNVC: 2
512206-4902: RNCC: 5 | RNVC: 2
512206-4902-000: RNCC: 5 | RNVC: 2

13 Dec 1980

5340-12-347-8843
Access Cover

123478843
1121038019: RNCC: 3 | RNVC: 9

3 Mar 1999

5340-12-170-1971
Clamping Catch

121701971
81658026028: RNCC: 3 | RNVC: 2
5000282698: RNCC: 5 | RNVC: 2
5000282698: RNCC: 5 | RNVC: 9

29 Jun 1977

5340-12-178-0398
Handwheel

121780398
3004CMV2013005: RNCC: 3 | RNVC: 2

16 Mar 1979

5340-12-357-8341
Shimmy Damper

123578341
6013010050: RNCC: 3 | RNVC: 2

30 Jul 2002

5340-12-020-5332

5340-12-169-4129
Retaining Strap

121694129
1481322034: RNCC: 3 | RNVC: 2
SVBE45G5X: RNCC: 5 | RNVC: 2

11 May 1977

5340-12-386-5837
Mounting Bracket

123865837
T251M3004205: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-345-4669
Angle Bracket

123454669
54.0053.617.00: RNCC: 3 | RNVC: 2

20 Mar 1998

5340-12-375-5278
Mechanical Stop

123755278
5050610336: RNCC: 3 | RNVC: 2
5050610336: RNCC: 5 | RNVC: 2

11 Jun 2008

5340-12-139-5993

5340-12-390-3918
Loop Clamp

123903918
DIN3016-1-C2-50-50X25-W1-2: RNCC: 2 | RNVC: 2

7 Nov 2012

5340-12-701-4338
Loop Clamp

127014338
VG95211-ML-127014338: RNCC: 2 | RNVC: 2
5.12.5313.0940.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-161-3263
Swivel Caster

121613263
4400.0010.10: RNCC: 3 | RNVC: 2
39-200-3: RNCC: 5 | RNVC: 2
39/200/3: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-369-8237
Access Cover

123698237
SK872-194140.000.0: RNCC: 3 | RNVC: 2
7081588: RNCC: 5 | RNVC: 2

18 Aug 2006

5340-12-149-7732
Nonmetallic Bumper

121497732
5800603-0130.007: RNCC: 2 | RNVC: 2
2243024702: RNCC: 3 | RNVC: 2
2P280-25-7: RNCC: 5 | RNVC: 2
5800603-0130-007: RNCC: 5 | RNVC: 9
22430 24702: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5581
Angle Bracket

127025581
VG95211-ML-127025581: RNCC: 2 | RNVC: 2
5.51.7240.0500.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-9912
Dust And Moisture Seal Protective Cap

127029912
VG95211-ML-127029912: RNCC: 2 | RNVC: 2
8.634.865: RNCC: 3 | RNVC: 2
0500862743499: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-152-4840
Retaining Strap

121524840
115-03215-4: RNCC: 3 | RNVC: 9
4-7822-869: RNCC: 5 | RNVC: 9
1092105-3701-001: RNCC: 5 | RNVC: 9
1092105-3701-001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-330-8978
Mounting Bracket

123308978
2718-000300.000.0: RNCC: 2 | RNVC: 2
2718-000300.000.0: RNCC: 3 | RNVC: 2

23 Feb 1993

5340-12-158-0036
Nut And Bolt Locking Plate

121580036
23305-200000-10-0: RNCC: 2 | RNVC: 2
23305-200000-10-0: RNCC: 5 | RNVC: 2
23305-200000.10.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-381-0066
Manual Control Lever

123810066
5.099-310.0: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-12-309-6618
Access Cover

123096618
272.318 129: RNCC: 2 | RNVC: 2
272.318.129: RNCC: 3 | RNVC: 2
272.318 129: RNCC: 5 | RNVC: 9

13 Feb 1987

5340-12-363-0521
Angle Bracket

123630521
947240677: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-355-4600
Angle Bracket

123554600
0008570112: RNCC: 3 | RNVC: 2

19 Nov 2001

5340-12-131-2740

5340-12-153-5397
Butt Hinge Leaf

121535397
100355-111220.01: RNCC: 2 | RNVC: 2
100355-111220-01: RNCC: 3 | RNVC: 2
100355-111220-01: RNCC: 5 | RNVC: 9
100355-111220-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-7848
Nonmetallic Bumper

123017848
DIN95364-A20X10-M6X20-NR45ST: RNCC: 2 | RNVC: 2
81130-20X10-M6X20.NR45.ST: RNCC: 5 | RNVC: 2
VG95364-A20X10-M6X20-NR45ST: RNCC: 5 | RNVC: 9
AE2.78/24N: RNCC: 5 | RNVC: 9

9 Nov 1984

5340-12-196-4510
Retaining Clip

121964510
450900-7032: RNCC: 3 | RNVC: 2
450900-7032-000: RNCC: 5 | RNVC: 2

7 Jul 1983

5340-12-354-1797
Mounting Plate

123541797
03854901: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-134-1906
Plain Solid Disk

121341906
7963 032 104: RNCC: 3 | RNVC: 2
8751-71-10-16: RNCC: 5 | RNVC: 2
8751-71-10.16: RNCC: 5 | RNVC: 2
7963032104: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-307-2437
Metal Runner

123072437
RP988630: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-365-1716
Manual Control Lever

123651716
5981-181720.001.0: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-318-9610
Dust And Moisture Seal Protective Plug

123189610
14591487: RNCC: 3 | RNVC: 2
45919: RNCC: 5 | RNVC: 2
14591487EY1108-53: RNCC: 5 | RNVC: 2

28 Aug 1989

5340-12-332-7249
Bow Handle

123327249
537237-0070.000: RNCC: 3 | RNVC: 2
537237-0070.000: RNCC: 5 | RNVC: 9

10 Sep 1993

5340-12-315-3611
Butt Hinge

123153611
DIN7956-32X0,8-30-ST-BK-U: RNCC: 2 | RNVC: 2
8.012.003.000: RNCC: 5 | RNVC: 2
C32X0,8DIN7956-ST: RNCC: 5 | RNVC: 2

15 Oct 1988

5340-12-148-9186
Loop Clamp

121489186
DIN3016-1-D2-7-16X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-7-16X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.7-16/15: RNCC: 3 | RNVC: 2
RSGU1100.7-16/15: RNCC: 5 | RNVC: 2
23176-060000-45-0: RNCC: 5 | RNVC: 2
4219101007: RNCC: 5 | RNVC: 2
RSGU1100-7-16-15: RNCC: 5 | RNVC: 2
DIN3016-D2-7-16X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-7591
Retaining Strap

123087591
KM.S01-110000.003.0: RNCC: 3 | RNVC: 2
KM.S01-110000.003: RNCC: 5 | RNVC: 2

14 Nov 1986

5340-12-174-0003
Angle Bracket

121740003
8439862: RNCC: 3 | RNVC: 2
0018-549: RNCC: 5 | RNVC: 2
0018549: RNCC: 5 | RNVC: 2

29 May 1978

5340-12-371-6074
Angle Bracket

123716074
160-77765-08: RNCC: 3 | RNVC: 2
160-77765.08: RNCC: 5 | RNVC: 2
15160-77765.08: RNCC: 5 | RNVC: 9

25 Apr 2007

5340-12-351-2468
Loop Clamp

123512468
SPGU6025.165/30SKW1: RNCC: 3 | RNVC: 2
1816025165: RNCC: 5 | RNVC: 2

5 Jul 2000

5340-12-148-8589
Electrical-Mechanical Equipment Post

121488589
03456022: RNCC: 3 | RNVC: 2
6103-17-01.28: RNCC: 5 | RNVC: 2
3456019EF6103-17: RNCC: 5 | RNVC: 2
3456022EF6103-17: RNCC: 5 | RNVC: 2
6103-17-01-28: RNCC: 5 | RNVC: 2
6103-17-01.25: RNCC: 5 | RNVC: 2
03456019: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-024-3167

5340-12-311-8431
Access Cover

123118431
2300074-3003.01: RNCC: 2 | RNVC: 2
2300074-3003.01: RNCC: 3 | RNVC: 2
2300074-3003.01: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-369-4023
Runner

123694023
3035894: RNCC: 3 | RNVC: 2
3035.894: RNCC: 5 | RNVC: 2

29 Jun 2006

5340-12-349-6470
Angle Bracket

123496470
U60.281000.20-00: RNCC: 3 | RNVC: 2

14 Dec 1999

5340-12-318-0910
Mounting Plate

123180910
4312 712 35750: RNCC: 3 | RNVC: 2
4900245-214 110.02: RNCC: 5 | RNVC: 9

12 Jun 1989

5340-12-702-0302
Loop Clamp

127020302
VG95211-ML-127020302: RNCC: 2 | RNVC: 2
2277A-25KD: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-330-3752
Mounting Plate

123303752
2300262-181000.005.0: RNCC: 2 | RNVC: 2
2300262-181000.005.0: RNCC: 3 | RNVC: 2

8 Dec 1992

5340-12-163-9527
Expansion Plug

121639527
080-0048-014-005: RNCC: 3 | RNVC: 2
0800048014005: RNCC: 5 | RNVC: 2
0948274010: RNCC: 5 | RNVC: 2
52375706: RNCC: 5 | RNVC: 2
0948274010: RNCC: 5 | RNVC: 9
948274010: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-173-0381
Loop Clamp

121730381
DIN3016-1-E1-36X9-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E1-36X9-W1-2: RNCC: 3 | RNVC: 2
RSGU0.36/9: RNCC: 3 | RNVC: 2
RSGU36-9: RNCC: 5 | RNVC: 2
RSGU36/9: RNCC: 5 | RNVC: 2
9400009036: RNCC: 5 | RNVC: 2
VG95931E36X9W1: RNCC: 5 | RNVC: 9
DIN3016-E1-36X9-W1-2: RNCC: 5 | RNVC: 9
VG95931-E36X9-W1: RNCC: 5 | RNVC: 9

15 Mar 1978

5340-12-701-6439
Angle Bracket

127016439
VG95211-ML-127016439: RNCC: 2 | RNVC: 2
5.12.7204.0360.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-315-9692
Magnetic Catch

123159692
NO PRIMARY REF 12-315-9692: RNCC: 3 | RNVC: 2
6020013: RNCC: 5 | RNVC: 2

9 Dec 1988

5340-12-193-7841
Pad Eye

121937841
2242135ED0150-01: RNCC: 3 | RNVC: 2
Q40227-83: RNCC: 5 | RNVC: 2
2242135: RNCC: 5 | RNVC: 2
0224 2135: RNCC: 5 | RNVC: 9
2242135: RNCC: 5 | RNVC: 9

30 Aug 1982

5340-12-328-6844
Angle Bracket

123286844
2300042-188350.004: RNCC: 2 | RNVC: 2
9873331: RNCC: 3 | RNVC: 9
2300042-188350.004: RNCC: 5 | RNVC: 2
2300042-188350.004: RNCC: 5 | RNVC: 9

13 Jun 1992

5340-12-357-7103
Manual Control Handle

123577103
0019193160: RNCC: 3 | RNVC: 2
928462-20: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-350-7344
Section Block Clamp

123507344
J29120390-003: RNCC: 3 | RNVC: 2

12 May 2000

5340-12-367-0031
Mounting Bracket

123670031
EX-0019: RNCC: 3 | RNVC: 2

28 Jun 2005

5340-12-350-6051
Dust And Moisture Seal Protective Cap

123506051
160-88354-11: RNCC: 3 | RNVC: 2
160-88354-11: RNCC: 5 | RNVC: 9

19 Apr 2000

5340-12-356-5972
Access Cover

123565972
2125-122611A01B: RNCC: 2 | RNVC: 2
2125-122611A01B: RNCC: 3 | RNVC: 2

14 Mar 2002

5340-12-349-1043
Mounting Plate

123491043
T284M3001101: RNCC: 3 | RNVC: 2
H284M1002105: RNCC: 5 | RNVC: 9

23 Sep 1999

5340-12-364-9493
Elastic Strap

123649493
200.0505.03.00.00: RNCC: 3 | RNVC: 2

18 Nov 2004

5340-12-361-0843
Double Angle Bracket

123610843
J29120223-401: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-185-3231
Mending Plate

121853231
8454866: RNCC: 3 | RNVC: 2
1105-157: RNCC: 5 | RNVC: 2
1105157: RNCC: 5 | RNVC: 2

30 Sep 1980

5340-12-312-6815
Mending Plate

123126815
4200077-141-02: RNCC: 2 | RNVC: 2

27 Jan 1988

5340-12-352-6646
Access Cover

123526646
2201743000: RNCC: 3 | RNVC: 2
220174-3000: RNCC: 5 | RNVC: 2

5 Dec 2000

5340-12-331-3228
Angle Bracket

123313228
704-122032-903-0: RNCC: 3 | RNVC: 2

22 Apr 1993

5340-12-368-2815
Retaining Strap

123682815
DIN3016-1-F1-63X25-W1-2-CR: RNCC: 2 | RNVC: 2
RSG2.63/25: RNCC: 3 | RNVC: 2
VG95931-F63X25-W1: RNCC: 5 | RNVC: 9
VG95931F63X25W1: RNCC: 5 | RNVC: 9

8 Feb 2006

5340-12-702-5690
Mounting Bracket

127025690
VG95211-ML-127025690: RNCC: 2 | RNVC: 2
5.51.7701.1003.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-339-5206
Mounting Bracket

123395206
1515-000211.000.0: RNCC: 3 | RNVC: 2

29 Nov 1995

5340-12-199-5118
Resilient Mount

121995118
DIN95363-C30X25-NR60ST: RNCC: 2 | RNVC: 2
1.30.25.2.60NR/ST: RNCC: 5 | RNVC: 2
811.020.030.025.08.NR60.ST: RNCC: 5 | RNVC: 2
81120-30X25-M8.NR60.ST: RNCC: 5 | RNVC: 2
25356 I FORM C: RNCC: 5 | RNVC: 2
5218165-11MN60: RNCC: 5 | RNVC: 2
5218165.15: RNCC: 5 | RNVC: 2
93-003-5133: RNCC: 5 | RNVC: 2
5218165 60SHORE: RNCC: 5 | RNVC: 2
VG95363-C30X25-NR60ST: RNCC: 5 | RNVC: 9

8 May 1984

5340-12-314-6888
Headless Straight Rod

123146888
941714: RNCC: 3 | RNVC: 2
0941714: RNCC: 5 | RNVC: 2
941714: RNCC: 5 | RNVC: 2

29 Jul 1988

5340-12-310-5317
Mending Plate

123105317
53.0428.155.03: RNCC: 3 | RNVC: 2

29 May 1987

5340-12-163-3785
Angle Bracket

121633785
4031871640: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-302-7873
Catch Strike

123027873
CF 482 325 B: RNCC: 3 | RNVC: 2
CF 482 325 B: RNCC: 5 | RNVC: 2
CF 482 325 C: RNCC: 5 | RNVC: 2

30 Jan 1985

5340-12-314-3905
Pipe Bracket

123143905
4230700566: RNCC: 3 | RNVC: 2
423 070 05 66: RNCC: 5 | RNVC: 2

1 Jul 1988

5340-12-041-2310

5340-12-090-1760

5340-12-347-0049
Mounting Plate

123470049
T671M6007207: RNCC: 3 | RNVC: 2

12 Oct 1998

5340-12-325-7554
Retaining Clip

123257554
40 0166 005: RNCC: 2 | RNVC: 2
40 0166 005: RNCC: 3 | RNVC: 2
40 0166 005: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-188-9969
Double Angle Bracket

121889969
9458985: RNCC: 3 | RNVC: 2
095050002102: RNCC: 5 | RNVC: 2
F300 0T 001 2911: RNCC: 6 | RNVC: 9

17 Aug 1981

5340-12-308-2476
Shimmy Damper

123082476
12192 016 918: RNCC: 3 | RNVC: 2
12192016918: RNCC: 5 | RNVC: 2
7700002849: RNCC: 5 | RNVC: 2

18 Sep 1986

5340-12-329-5883
Angle Bracket

123295883
158801: RNCC: 3 | RNVC: 2

4 Sep 1992

5340-12-187-4659
Double Angle Bracket

121874659
5802206-027100-012: RNCC: 2 | RNVC: 2
533.4574: RNCC: 3 | RNVC: 2
5334574: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-316-6618
Double Angle Bracket

123166618
51191010025: RNCC: 3 | RNVC: 2
51191010025: RNCC: 3 | RNVC: 2
51.19101-0025: RNCC: 5 | RNVC: 2
51.19101-0025: RNCC: 5 | RNVC: 2

31 Jan 1989

5340-12-181-2541
Dust And Moisture Seal Protective Cap

121812541
1361016-17018-00: RNCC: 3 | RNVC: 2

7 Nov 1979

5340-12-160-1944
Padlock

121601944
DIN7465-D1-50-LQ-OHNE LOCHBLENDE: RNCC: 2 | RNVC: 2
DIN7465-A50-ST-OHNE LOCHBLENDE: RNCC: 5 | RNVC: 2
007465050102: RNCC: 5 | RNVC: 2
A50DIN7465-ST-OHNE LOCHBLENDE: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-357-2783
Multiple Angle Bracket

123572783
81155010860: RNCC: 3 | RNVC: 2
81.15501.0860: RNCC: 5 | RNVC: 2

29 May 2002

5340-12-391-9464
Spring Loaded Cylinder Fastener

123919464
L.02203: RNCC: 3 | RNVC: 2

22 Apr 2013

5340-12-385-5465
Bumper

123855465
0005336354: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-12-341-0450
Mending Plate

123410450
251595150013: RNCC: 3 | RNVC: 2
251595150013: RNCC: 5 | RNVC: 2
25 1595 15 00 13: RNCC: 5 | RNVC: 9

20 Jul 1996

5340-12-011-6222

5340-12-011-6312

5340-12-352-7726
Helical Compression Spring Seat

123527726
2410122016: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-12-316-2471
Mending Plate

123162471
NO PRIMARY REF 12-316-2471: RNCC: 3 | RNVC: 2
M/006855/00/4: RNCC: 5 | RNVC: 9

4 Jan 1989

5340-12-185-2244
Manual Control Handle

121852244
106-111-012: RNCC: 3 | RNVC: 2

23 Sep 1980

5340-12-360-3790
Double Angle Bracket

123603790
V6555-01019-103: RNCC: 3 | RNVC: 2

15 May 2003

5340-12-148-6243
Cremone Bolt

121486243
VG75121-A-480MM OBEN 693MM UNTEN: RNCC: 2 | RNVC: 2
4430BEN480UNTEN693: RNCC: 3 | RNVC: 2
4450BEN480UNTEN693: RNCC: 3 | RNVC: 2
AVDA751210BEN480UNTEN693: RNCC: 5 | RNVC: 2
AVDA75121-OBEN480MM-UNTEN693MM: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-322-2716
Retaining Strap

123222716
DIN72571-1X24-ST-ZN: RNCC: 2 | RNVC: 2
DIN72571-1X24-ST-ZN: RNCC: 3 | RNVC: 2
1X24DIN72571: RNCC: 3 | RNVC: 2
01121269: RNCC: 5 | RNVC: 2

7 Aug 1990

5340-12-315-6643
Access Cover

123156643
512214-3709.000: RNCC: 3 | RNVC: 2
512214-3709: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-300-0668
Multiple Angle Bracket

123000668
TL5340-0015: RNCC: 2 | RNVC: 2
23111-4500.11: RNCC: 3 | RNVC: 2
1091580: RNCC: 5 | RNVC: 9
23111-4500-11: RNCC: 5 | RNVC: 9
23111-4500.11: RNCC: 5 | RNVC: 9
23111-4500.11: RNCC: 5 | RNVC: 9
23111-4500.11: RNCC: 5 | RNVC: 9
23111-4500-11: RNCC: 5 | RNVC: 9

29 Jun 1984

5340-12-393-8546
Butt Hinge

123938546
DIN7954-A100-ST-BK: RNCC: 2 | RNVC: 2

16 Oct 2013

5340-12-319-2943
Helical Compression Spring Retainer

123192943
2654-336223.02: RNCC: 2 | RNVC: 2
2654-336223.02: RNCC: 3 | RNVC: 2
679-08020203.02: RNCC: 5 | RNVC: 9
2654-336 223.02: RNCC: 5 | RNVC: 9
679-08020203.02: RNCC: 5 | RNVC: 9

20 Sep 1989

5340-12-357-5764
Dust And Moisture Seal Protective Plug

123575764
0009873944: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-12-367-5246
Helical Compression Spring Seat

123675246
10020: RNCC: 3 | RNVC: 2

29 Aug 2005

5340-12-368-4620
Abdeckung

123684620
5551880285: RNCC: 3 | RNVC: 2

14 Mar 2006

5340-12-179-5212
Turnbuckle Body

121795212
2481301: RNCC: 3 | RNVC: 2

4 Jul 1979

5340-12-375-4298
Access Cover

123754298
T14476: RNCC: 3 | RNVC: 2

2 Jun 2008

5340-12-178-6513
Retaining Strap

121786513
3520182140: RNCC: 3 | RNVC: 2
3520182140: RNCC: 5 | RNVC: 2

7 May 1979

5340-12-353-8012
Mending Plate

123538012
19005325: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-180-6965
Headless Straight Rod

121806965
02605936: RNCC: 3 | RNVC: 2
2605936EZ5505-29: RNCC: 5 | RNVC: 2

28 Sep 1979

5340-12-182-1557
Loop Clamp

121821557
2309173: RNCC: 3 | RNVC: 2
117351: RNCC: 5 | RNVC: 2

16 Jan 1980

Load More Results