What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 30 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 30 of 178

5340-12-700-8674
Loop Clamp

127008674
VG95211-ML-127008674: RNCC: 2 | RNVC: 2
155N464-18: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-302-9660
Leather Strap

123029660
6545-20100: RNCC: 2 | RNVC: 2
6545-20100: RNCC: 5 | RNVC: 9

12 Feb 1985

5340-12-359-1685
Extension Drawer Slide

123591685
20230-782: RNCC: 3 | RNVC: 2

8 Jan 2003

5340-12-166-3801
Loop Clamp

121663801
LN9491A25: RNCC: 2 | RNVC: 2

3 Sep 1976

5340-12-323-2470
Retaining Strap

123232470
6031870044: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-12-319-3611
Mending Plate

123193611
6393597: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-12-342-5729
Access Cover

123425729
4110611682: RNCC: 3 | RNVC: 2
4110011682: RNCC: 5 | RNVC: 2

28 Feb 1997

5340-12-010-0056

5340-12-004-4006

5340-12-191-4481
Pad Eye

121914481
4602840198: RNCC: 3 | RNVC: 2
2407-25: RNCC: 5 | RNVC: 2
720 1 24 106 1: RNCC: 5 | RNVC: 9

3 Feb 1982

5340-12-332-4116
Mending Plate

123324116
0851 7564.107: RNCC: 3 | RNVC: 2
8517564FA T.107: RNCC: 5 | RNVC: 9

9 Aug 1993

5340-12-390-6749
Access Door Hinge

123906749
107W189630.000.0: RNCC: 2 | RNVC: 2
107W189630.000.0: RNCC: 3 | RNVC: 2

3 Dec 2012

5340-12-309-9365
Nonmetallic Solid Wheel

123099365
E32-821080A01B: RNCC: 3 | RNVC: 2

20 Mar 1987

5340-12-317-4067
Turnbuckle Body

123174067
DIN1478-SPM10-ST-A3P: RNCC: 2 | RNVC: 2
5000010V: RNCC: 3 | RNVC: 2
DIN1478-SPM10-ST-A3P: RNCC: 3 | RNVC: 2

5 Apr 1989

5340-12-350-3841
Block Clamp

123503841
J29120348-401: RNCC: 3 | RNVC: 2

23 Mar 2000

5340-12-312-3062
Catch Strike

123123062
C40123-A18-C8: RNCC: 3 | RNVC: 2

15 Dec 1987

5340-12-183-7579
Plain Solid Disk

121837579
R900152145: RNCC: 3 | RNVC: 2
1694-676: RNCC: 5 | RNVC: 2
8411362: RNCC: 5 | RNVC: 2
27020694152145: RNCC: 5 | RNVC: 2
152145: RNCC: 5 | RNVC: 9

20 May 1980

5340-12-338-8002
Mounting Plate

123388002
6700017-630420.01: RNCC: 2 | RNVC: 2
6700017-630420.01: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-302-0436
Sealing Plug Assembly

123020436
RD76X450POLYAMID: RNCC: 3 | RNVC: 2

29 Nov 1984

5340-12-196-2127
Plug Button

121962127
8950717804: RNCC: 3 | RNVC: 2
0691003: RNCC: 5 | RNVC: 2
691003: RNCC: 5 | RNVC: 9

13 Jun 1983

5340-12-359-5833
Mounting Plate

123595833
9428901746: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-12-384-2767
Dust And Moisture Seal Protective Plug

123842767
51960020080: RNCC: 3 | RNVC: 2
51.96002-0080: RNCC: 5 | RNVC: 2

9 Feb 2011

5340-12-334-4878
Mending Plate

123344878
6600185-203900.01: RNCC: 2 | RNVC: 2
6600185-203900.01: RNCC: 3 | RNVC: 2

16 May 1994

5340-12-702-5394
Angle Bracket

127025394
VG95211-ML-127025394: RNCC: 2 | RNVC: 2
5.51.7204.1700.07: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-349-5188
Mounting Bracket

123495188
3000.110-500: RNCC: 3 | RNVC: 2
1080-0025.3000 110-500: RNCC: 5 | RNVC: 9

24 Nov 1999

5340-12-345-9797
Manual Control Lever

123459797
C41105-A85-B10: RNCC: 3 | RNVC: 2

26 May 1998

5340-12-311-0754
Retaining Strap

123110754
5802284-121200.02: RNCC: 2 | RNVC: 2
4312 712 61840: RNCC: 3 | RNVC: 2

23 Jul 1987

5340-12-325-8878
Webbing Strap

123258878
79017/026-0900-0670: RNCC: 3 | RNVC: 2
79017/026-0900-0670: RNCC: 5 | RNVC: 9

18 Jul 1991

5340-12-702-4543
Retaining Bail

127024543
VG95211-ML-127024543: RNCC: 2 | RNVC: 2
5.51.0602.1712.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-166-1980
Resilient Mount

121661980
DIN95363-A15X8-M4X5,5-M4X9-NR40: RNCC: 2 | RNVC: 2
500012-M4X5,5-M4X9.NR4O.ST: RNCC: 5 | RNVC: 2
41420-10-5: RNCC: 5 | RNVC: 2
VG95363-A15X8-M4X5,5-M4X9-NR4OST: RNCC: 5 | RNVC: 9

12 Aug 1976

5340-12-329-5823
Webbing Strap

123295823
01802-1-1000MM: RNCC: 3 | RNVC: 2
01802-1-1000: RNCC: 5 | RNVC: 2
01802-1-L1000MM: RNCC: 5 | RNVC: 2
79036-1000: RNCC: 5 | RNVC: 2
DIN60060-1-10X2500-C1: RNCC: 5 | RNVC: 9
DIN60060-1-25X1000-C2: RNCC: 5 | RNVC: 9

3 Sep 1992

5340-12-338-5688
Angle Bracket

123385688
2500253-196700.001.0: RNCC: 2 | RNVC: 2
2500253-196700.001.0: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-12-195-8514
Mending Plate

121958514
A-243796-013: RNCC: 3 | RNVC: 2
A243796-013: RNCC: 5 | RNVC: 2

25 Apr 1983

5340-12-179-7034
Spring Tension Clip

121797034
90.703.00.668: RNCC: 3 | RNVC: 2
81.97640-0120: RNCC: 5 | RNVC: 2
81976400120: RNCC: 5 | RNVC: 2
0765067: RNCC: 5 | RNVC: 2
3095-399: RNCC: 5 | RNVC: 2
90-703-00-66-8: RNCC: 5 | RNVC: 2
90.703.00.66.8: RNCC: 5 | RNVC: 2
3095399: RNCC: 5 | RNVC: 2
0008350434: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-12-185-2236
Manual Control Handle

121852236
100278-35080.02.0: RNCC: 2 | RNVC: 2
100278-35080.02.0: RNCC: 3 | RNVC: 2
100278-35080-02-0: RNCC: 5 | RNVC: 2
100278-35080-02-0: RNCC: 5 | RNVC: 9

23 Sep 1980

5340-12-159-5273
Loop Clamp

121595273
DIN3016-1-E1-41X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E1-41X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.41/15: RNCC: 3 | RNVC: 2
RSGU41-15: RNCC: 5 | RNVC: 2
RSGU41/15: RNCC: 5 | RNVC: 2
9400015041: RNCC: 5 | RNVC: 2
VG95931-E41X15-W1: RNCC: 5 | RNVC: 9
VG95931E41X15W1: RNCC: 5 | RNVC: 9
DIN3016-E1-41X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-361-6708
Swivel Caster

123616708
B-RD-125P: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-177-5509
Dust And Moisture Seal Protective Cap

121775509
344011889: RNCC: 3 | RNVC: 2

5 Feb 1979

5340-12-377-0076
Strap Hinge

123770076
8301-0002: RNCC: 2 | RNVC: 2
8301-0002: RNCC: 3 | RNVC: 2

3 Dec 2008

5340-12-192-1669
Retaining Strap

121921669
50.213: RNCC: 3 | RNVC: 2
50-213: RNCC: 5 | RNVC: 2

29 Mar 1982

5340-12-156-8779
Electrical-Mechanical Equipment Post

121568779
144773102: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-346-3221
Nonmetallic Bumper

123463221
20292A/A: RNCC: 3 | RNVC: 2

10 Jul 1998

5340-12-346-2447
Rod End Clevis

123462447
1201 8672: RNCC: 3 | RNVC: 2

2 Jul 1998

5340-12-379-4810
Nut And Bolt Head Protective Cap

123794810
913018019100: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-12-307-8764
Rod End Clevis

123078764
TLF428-1: RNCC: 3 | RNVC: 2

6 Aug 1986

5340-12-130-0606
Rod End Connector

121300606
2032167: RNCC: 3 | RNVC: 2
AG6: RNCC: 3 | RNVC: 2
3463060: RNCC: 3 | RNVC: 2
203 216 7: RNCC: 3 | RNVC: 9
03046: RNCC: 5 | RNVC: 2
58221-3: RNCC: 5 | RNVC: 9
0G6: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-336-7494
Clamping Catch

123367494
E2.00.00.30/6: RNCC: 3 | RNVC: 2
E2.00.00.30/6: RNCC: 5 | RNVC: 2

19 Dec 1994

5340-12-356-7231
Mounting Bracket

123567231
6017805: RNCC: 3 | RNVC: 2
6015.170.70.01.003: RNCC: 5 | RNVC: 9

27 Mar 2002

5340-12-383-4097
Handwheel

123834097
H5-180-2: RNCC: 3 | RNVC: 2

18 Oct 2010

5340-12-168-6192
Compression Cup

121686192
T50-29-88NBR/101: RNCC: 3 | RNVC: 2
T50-29-88NBR101: RNCC: 5 | RNVC: 2
7-335-0106TEIL57: RNCC: 5 | RNVC: 2

23 Mar 1977

5340-12-388-8582
Mounting Bracket

123888582
5981-180000.057.0: RNCC: 2 | RNVC: 2
5981-180000.057.0: RNCC: 3 | RNVC: 2

2 May 2012

5340-12-342-1299
Retaining Strap

123421299
6690007-111700.006.0: RNCC: 2 | RNVC: 2
400000-9646: RNCC: 3 | RNVC: 2

17 Dec 1996

5340-12-176-9023
Nonmetallic Bumper

121769023
2300002-143300.001: RNCC: 2 | RNVC: 2
2300002-143300.001: RNCC: 3 | RNVC: 2
2300002-143300.001: RNCC: 3 | RNVC: 2
2300002-143300-001: RNCC: 5 | RNVC: 9
2300002-143300.001: RNCC: 5 | RNVC: 9
2300002-143300-001: RNCC: 5 | RNVC: 9

27 Dec 1978

5340-12-198-9150
Angle Bracket

121989150
5077 327 043: RNCC: 3 | RNVC: 2
5077327043: RNCC: 5 | RNVC: 2
5077 228 004: RNCC: 5 | RNVC: 2
5077228004: RNCC: 5 | RNVC: 2
3.7099-4601.1: RNCC: 5 | RNVC: 9
3.7099-4601.2: RNCC: 5 | RNVC: 9
3709946011: RNCC: 5 | RNVC: 9

13 Mar 1984

5340-12-199-5574
Double Angle Bracket

121995574
2300002-065213.000: RNCC: 2 | RNVC: 2
2300002-065213.000: RNCC: 3 | RNVC: 2
2300002-065213: RNCC: 5 | RNVC: 9

11 May 1984

5340-12-347-4878
Angle Bracket

123474878
2300387-640300.001: RNCC: 2 | RNVC: 2
9909515: RNCC: 3 | RNVC: 2
2300387-640300.001: RNCC: 5 | RNVC: 2
2300387-640300.001: RNCC: 5 | RNVC: 9
9909515: RNCC: 5 | RNVC: 9

16 Dec 1998

5340-12-379-4051
Spring Tension Clip

123794051
1430240219: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-375-5103
Mounting Plate

123755103
L311M1032101: RNCC: 3 | RNVC: 2

10 Jun 2008

5340-12-382-6509
Handwheel

123826509
HANDVDHA06SX: RNCC: 3 | RNVC: 2

21 Jul 2010

5340-12-702-5245
Mounting Bracket

127025245
VG95211-ML-127025245: RNCC: 2 | RNVC: 2
5.51.7010.0200.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-152-8166
Retaining Clip

121528166
2360-120024.11.0: RNCC: 2 | RNVC: 2
2460400071: RNCC: 3 | RNVC: 2
2360-120024-11-0: RNCC: 5 | RNVC: 2
02462: RNCC: 5 | RNVC: 2
2360-120024.11.0: RNCC: 5 | RNVC: 2
2360-120024-11-0: RNCC: 5 | RNVC: 2
2360-120024.11.0: RNCC: 5 | RNVC: 2
2360-120024-11-0: RNCC: 5 | RNVC: 9
2360-120024.11.0: RNCC: 5 | RNVC: 9
02462: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-390-3898
Loop Clamp

123903898
DIN3016-1-A1-38X20-W1-2: RNCC: 2 | RNVC: 2

7 Nov 2012

5340-12-166-3825
Retaining Strap

121663825
940.50.023: RNCC: 3 | RNVC: 2
940-50-002: RNCC: 5 | RNVC: 9
FK110-11B: RNCC: 5 | RNVC: 9

3 Sep 1976

5340-12-174-6552
Resilient Mount

121746552
E1E 41S 55 FB: RNCC: 3 | RNVC: 2
E1E41S55FB: RNCC: 5 | RNVC: 2

17 Jul 1978

5340-12-317-4800
Mounting Bracket

123174800
251813289: RNCC: 3 | RNVC: 2
251813289: RNCC: 5 | RNVC: 2
251813289: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-12-388-4186
Electronic Equipment Hardware Kit

123884186
160X10209X: RNCC: 3 | RNVC: 2
16V1IM7A: RNCC: 5 | RNVC: 2

21 Mar 2012

5340-12-186-5864
Spring Tension Clip

121865864
C22326-A1000-C21: RNCC: 3 | RNVC: 2
C22326A1000C21: RNCC: 5 | RNVC: 9
C22099-A705-C260: RNCC: 5 | RNVC: 9
C22099A705C260: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-12-162-7483
Helical Compression Spring Retainer

121627483
100032-01505-03: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-365-0770
Stake Pocket

123650770
GLD99-00-111100.01: RNCC: 3 | RNVC: 2

26 Nov 2004

5340-12-323-2117
Mounting Bracket

123232117
15 0004 018: RNCC: 3 | RNVC: 2

2 Nov 1990

5340-12-198-5446
Retaining Strap

121985446
23114-3700.11: RNCC: 2 | RNVC: 2
23114-3700.11: RNCC: 3 | RNVC: 2
23114-3700-11: RNCC: 5 | RNVC: 9
23114-3700.11: RNCC: 5 | RNVC: 9
23114-3700-11: RNCC: 5 | RNVC: 9

8 Feb 1984

5340-12-359-7989
Spring Tension Clip

123597989
81955400022: RNCC: 3 | RNVC: 2
203070: RNCC: 3 | RNVC: 2
1008000006/013: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-363-5666
Mounting Plate

123635666
BRR22179: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-12-702-9092
Dust And Moisture Seal Protective Cap

127029092
VG95211-ML-127029092: RNCC: 2 | RNVC: 2
14 OST1 10010-79: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-170-2308
Loop Clamp

121702308
DIN3016-1-B1-18X20-W1-2: RNCC: 2 | RNVC: 2
RS0.18/20: RNCC: 3 | RNVC: 2
DIN3016-B1-18X20-W1-2: RNCC: 3 | RNVC: 2
RS18-20: RNCC: 5 | RNVC: 2
RS18/20: RNCC: 5 | RNVC: 2
4100020018: RNCC: 5 | RNVC: 2
DIN3016-B1-18X20-W1-2: RNCC: 5 | RNVC: 9
VG95931B18X20W1: RNCC: 5 | RNVC: 9
VG95931-B18X20-W1: RNCC: 5 | RNVC: 9

5 Jul 1977

5340-12-187-5469
Loop Clamp

121875469
DIN3016-2-G1-168X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-168X15-W1-2: RNCC: 3 | RNVC: 2
SP168/15SKZ: RNCC: 3 | RNVC: 2
1410000168: RNCC: 5 | RNVC: 2
DIN3016-G1-168X15-W1-2: RNCC: 5 | RNVC: 9
SP168-15SKZ: RNCC: 5 | RNVC: 9
VG95931-G168X15-W1: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-323-7358
Handwheel

123237358
DIN950-A4-225X20-AL: RNCC: 2 | RNVC: 2
DIN950-AL-225-B20-A: RNCC: 3 | RNVC: 2
272.341 752: RNCC: 5 | RNVC: 2

12 Dec 1990

5340-12-197-3683
Lock-Release Lever

121973683
2500135-192400.005.0: RNCC: 2 | RNVC: 2
2500135-192400.005.0: RNCC: 3 | RNVC: 2
2500135-192400.005.0: RNCC: 3 | RNVC: 2
2500135-192400.005.0: RNCC: 5 | RNVC: 9
1503533: RNCC: 5 | RNVC: 9
2500135-192400.001.0: RNCC: 5 | RNVC: 9

17 Oct 1983

5340-12-303-2641
Rod End Clevis

123032641
P-886655-001: RNCC: 3 | RNVC: 2
P886655-001: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-701-6835
Angle Bracket

127016835
VG95211-ML-127016835: RNCC: 2 | RNVC: 2
5.12.7217.1030.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-3646
Butt Hinge

127023646
VG95211-ML-127023646: RNCC: 2 | RNVC: 2
5.12.0200.1740.92: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-391-0387
Webbing Strap

123910387
176637-L=400: RNCC: 3 | RNVC: 2
7081710: RNCC: 5 | RNVC: 2

17 Jan 2013

5340-12-348-9305
Swivel Caster

123489305
L-POEV 160K-FI: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-12-702-1553
Rod End Connector

127021553
VG95211-ML-127021553: RNCC: 2 | RNVC: 2
30.6113.104: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-345-5096
Lock-Release Lever

123455096
2125-126010.00C: RNCC: 2 | RNVC: 2
2125-126010.00C: RNCC: 3 | RNVC: 2

25 Mar 1998

5340-12-175-8954
Retaining Strap

121758954
5801352-5223.00: RNCC: 2 | RNVC: 2
5801352-5223.00: RNCC: 3 | RNVC: 2
5801352-5223-00: RNCC: 5 | RNVC: 2
5801352-5223-00: RNCC: 5 | RNVC: 2
5801352-5223-00: RNCC: 5 | RNVC: 9

25 Oct 1978

5340-12-353-6880
Angle Bracket

123536880
J92224245-401: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-364-5164
Helical Compression Spring Seat

123645164
553-161400.000: RNCC: 2 | RNVC: 2
553-161400.000: RNCC: 3 | RNVC: 2

6 Oct 2004

5340-12-192-8487
Catch Strike

121928487
8-4725.00: RNCC: 2 | RNVC: 2
8-4725.00: RNCC: 3 | RNVC: 2
8-4725.00: RNCC: 5 | RNVC: 9
8-4725-00: RNCC: 5 | RNVC: 9
8-4725.00: RNCC: 5 | RNVC: 9

27 May 1982

5340-12-359-6765
Mounting Bracket

123596765
2500261-180000.226.0: RNCC: 2 | RNVC: 2
2500261-180000.226.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-182-7869
Nonmetallic Bumper

121827869
P-243875-011: RNCC: 3 | RNVC: 2
P243875-011: RNCC: 5 | RNVC: 2

27 Feb 1980

5340-12-320-4234
Dust And Moisture Seal Protective Plug

123204234
5957.0501 503: RNCC: 3 | RNVC: 2
5957 0501 503: RNCC: 5 | RNVC: 2
290200: RNCC: 5 | RNVC: 9

12 Jan 1990

5340-12-310-2136
Mending Plate

123102136
5080765: RNCC: 3 | RNVC: 2

22 Apr 1987

5340-12-347-8841
Helical Compression Spring Seat

123478841
5800530125: RNCC: 3 | RNVC: 2
580 053 01 25: RNCC: 5 | RNVC: 2

3 Mar 1999

5340-12-182-2229
Mending Plate

121822229
CF 465 954: RNCC: 2 | RNVC: 2
CF 465 954: RNCC: 3 | RNVC: 2
CF 465 954: RNCC: 5 | RNVC: 2
CF465954: RNCC: 5 | RNVC: 2
CF465954: RNCC: 5 | RNVC: 2
CF 465 954: RNCC: 5 | RNVC: 2
CF465954: RNCC: 5 | RNVC: 2

21 Jan 1980

5340-12-197-5310
Ball Socket Seat

121975310
1153000086: RNCC: 3 | RNVC: 2

28 Oct 1983

5340-12-312-9072
Double Angle Bracket

123129072
1070027: RNCC: 3 | RNVC: 2

18 Feb 1988

5340-12-391-0346
Mounting Plate

123910346
622.041.4: RNCC: 3 | RNVC: 2

16 Jan 2013

5340-12-326-5408
Helical Compression Spring Seat

123265408
1668871: RNCC: 3 | RNVC: 2
1668871: RNCC: 5 | RNVC: 2

2 Oct 1991

5340-12-385-4221
Double Angle Bracket

123854221
5500901341: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-387-4620
Loop Clamp

123874620
110026: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-12-349-5013
Butt Hinge

123495013
T524M1501224: RNCC: 3 | RNVC: 2

23 Nov 1999

5340-12-300-3122
Angle Bracket

123003122
3098820342: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-194-2183
Angle Bracket

121942183
81.62740.0055: RNCC: 3 | RNVC: 2

12 Oct 1982

5340-12-381-9338
Double Angle Bracket

123819338
000605-204550.01: RNCC: 2 | RNVC: 2
000605-204550.01: RNCC: 3 | RNVC: 2
39231: RNCC: 5 | RNVC: 2

19 Apr 2010

5340-12-322-1870
Metal Runner

123221870
40 0176 514: RNCC: 2 | RNVC: 2
40 0176 514: RNCC: 3 | RNVC: 2
40 0176 514: RNCC: 5 | RNVC: 9

31 Jul 1990

5340-12-380-7563
Butt Hinge

123807563
000614 050 Z: RNCC: 3 | RNVC: 2
4003984050326: RNCC: 5 | RNVC: 2

25 Nov 2009

5340-12-302-4099
Spring Tension Clip

123024099
1015.4.007025.4: RNCC: 3 | RNVC: 2
0408840: RNCC: 5 | RNVC: 2
1015.4007025.4: RNCC: 5 | RNVC: 2

28 Dec 1984

5340-12-320-0883
Loop Clamp

123200883
6115901: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-12-347-9936
Plain Solid Disk

123479936
016185: RNCC: 3 | RNVC: 2
016185: RNCC: 5 | RNVC: 9

23 Mar 1999

5340-12-372-6987
Belt-Strap Keeper

123726987
D4075828: RNCC: 3 | RNVC: 2

14 Aug 2007

5340-12-385-2309
Butt Hinge Leaf

123852309
1091559: RNCC: 3 | RNVC: 2

11 May 2011

5340-12-384-2092
Loop Clamp

123842092
4851500031: RNCC: 3 | RNVC: 2
81974300054: RNCC: 5 | RNVC: 2

2 Feb 2011

5340-12-381-7450
Snap Hook

123817450
290 00941: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-12-375-6725
Mounting Bracket

123756725
L258M2114101: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-12-378-5949
Mounting Bracket

123785949
2334213000: RNCC: 3 | RNVC: 2

23 Apr 2009

5340-12-310-5339
Nonmetallic Bumper

123105339
78203 46513: RNCC: 2 | RNVC: 2
7820346513: RNCC: 3 | RNVC: 2
78203 46513: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-358-9212
Angle Bracket

123589212
3854131042: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-321-6962
Nonmetallic Bumper

123216962
1530221022: RNCC: 3 | RNVC: 2
ASC1347070: RNCC: 5 | RNVC: 9

15 Jun 1990

5340-12-152-2647

5340-12-094-9134

5340-12-165-3078

5340-12-388-3929
Sliding Block

123883929
1.32.EM8: RNCC: 3 | RNVC: 2

16 Mar 2012

5340-12-196-9086
Mending Plate

121969086
0118B101578/1-2: RNCC: 3 | RNVC: 2

30 Aug 1983

5340-12-390-2894
Mounting Bracket

123902894
120D256017.000.0: RNCC: 2 | RNVC: 2
120D256017.000.0: RNCC: 3 | RNVC: 2

26 Oct 2012

5340-12-386-5057
Access Cover

123865057
120D185121.000.0: RNCC: 2 | RNVC: 2
120D185121.000.0: RNCC: 3 | RNVC: 2
1797854: RNCC: 5 | RNVC: 2

7 Sep 2011

5340-12-361-7617
Angle Bracket

123617617
96.2.950.0003: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-12-359-7216
Mounting Bracket

123597216
SP12394: RNCC: 3 | RNVC: 2
69.3.323.9502: RNCC: 5 | RNVC: 9

5 Mar 2003

5340-12-165-7859
Staub- Und F Kappe

5340-12-702-2082
Blank Panel

127022082
VG95211-ML-127022082: RNCC: 2 | RNVC: 2
30.7211.630.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-310-3336
Access Cover

123103336
0651301: RNCC: 3 | RNVC: 2
5340-12-178-1518: RNCC: 6 | RNVC: 9

11 May 1987

5340-12-193-9842
Electrical-Mechanical Equipment Post

121939842
VG95148B5XM2,5X6-AL: RNCC: 2 | RNVC: 2
VG95148B5XM2,5X6-AL: RNCC: 3 | RNVC: 2
MB0882191: RNCC: 3 | RNVC: 2
MB 088.2191: RNCC: 5 | RNVC: 2

21 Sep 1982

5340-12-702-5259
Mounting Plate

127025259
VG95211-ML-127025259: RNCC: 2 | RNVC: 2
5.51.7010.0330.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-340-4102
Angle Bracket

123404102
6700019-201400.03: RNCC: 2 | RNVC: 2
6700019-201400.03: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-12-308-3237
Angle Bracket

123083237
5802017-460000.00: RNCC: 2 | RNVC: 2
5802017-460000.00: RNCC: 3 | RNVC: 2
5802017-460000.00: RNCC: 3 | RNVC: 2

25 Sep 1986

5340-12-302-0026
Butt Hinge Leaf

123020026
1300061-150000.08: RNCC: 2 | RNVC: 2
7834346: RNCC: 3 | RNVC: 2
1300061-150000.08: RNCC: 5 | RNVC: 2
3-7834-346: RNCC: 5 | RNVC: 2
7834-346: RNCC: 5 | RNVC: 2
1300061-150000-08: RNCC: 5 | RNVC: 9
1300061-150000.08: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-12-359-1567
Angle Bracket

123591567
J21520159-401: RNCC: 3 | RNVC: 2

6 Jan 2003

5340-12-342-6114
Runner

123426114
6 223 002 210: RNCC: 3 | RNVC: 2

6 Mar 1997

5340-12-340-4194
Angle Bracket

123404194
187425401: RNCC: 3 | RNVC: 2
E 18 742 5401: RNCC: 5 | RNVC: 2

11 Apr 1996

5340-12-190-2581
Helical Compression Spring Seat

121902581
2420222010: RNCC: 3 | RNVC: 2
2 420 222 010: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-358-4337
Mounting Plate

123584337
58R059-84611-9: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-342-4495
Webbing Strap

123424495
S 1434: RNCC: 3 | RNVC: 2
C 1048: RNCC: 5 | RNVC: 9

13 Feb 1997

5340-12-352-4967
Mounting Bracket

123524967
521910-970121.000.0: RNCC: 2 | RNVC: 2
521910-970121.000.0: RNCC: 3 | RNVC: 2
1271403: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-375-6843
Rod End Clevis

123756843
L533M1215101: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-12-190-7207
Metal Runner

121907207
NO PRIMARY REF 12-190-7207: RNCC: 3 | RNVC: 2
6905 067824: RNCC: 5 | RNVC: 9
6905067824: RNCC: 5 | RNVC: 9
5-684-1151: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-306-5763
Retaining Strap

123065763
V22.917.1-30: RNCC: 3 | RNVC: 2

12 Mar 1986

5340-12-319-9684
Mounting Bracket

123199684
A-145301-009: RNCC: 3 | RNVC: 2
A145301-009: RNCC: 5 | RNVC: 2

23 Nov 1989

5340-12-384-8939
Retaining Strap

123848939
MMN325-1/1 D11-10-S235JR: RNCC: 3 | RNVC: 2
700325010110: RNCC: 5 | RNVC: 2

7 Apr 2011

5340-12-343-4357
Lock-Release Lever

123434357
0001-220600-000-0: RNCC: 2 | RNVC: 2
0001-220600-000-0: RNCC: 3 | RNVC: 2
0001-220600-000-0: RNCC: 5 | RNVC: 9

20 Jun 1997

5340-12-328-2635
Mending Plate

123282635
2300232-208300.007.0: RNCC: 2 | RNVC: 2
2300232-208300.007.0: RNCC: 3 | RNVC: 2

30 Apr 1992

5340-12-306-0771
Pipe Bracket

123060771
12493: RNCC: 3 | RNVC: 2
0029888378: RNCC: 5 | RNVC: 2
02-2149: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-177-6178
Angle Bracket

121776178
1218 9341: RNCC: 3 | RNVC: 2
12189341: RNCC: 5 | RNVC: 9
6-226-0-982-018-4: RNCC: 5 | RNVC: 9

9 Feb 1979

5340-12-162-4700
Resilient Mount

121624700
DIN95363-A9X12-NR45ST-M4X12: RNCC: 2 | RNVC: 2
500005-M4X12.NR45.ST: RNCC: 5 | RNVC: 2
25317/A-BSTN4590: RNCC: 5 | RNVC: 2
25317BSTN4590: RNCC: 5 | RNVC: 2
25317SM450: RNCC: 5 | RNVC: 2
25317,NR45ST: RNCC: 5 | RNVC: 2
0G0155032: RNCC: 5 | RNVC: 2
VG95363-A9X12-M4X12-NR45ST: RNCC: 5 | RNVC: 9
VG95363-A9X12-NR45ST-M4X12: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-3825
Angle Bracket

123013825
P-856084-401: RNCC: 3 | RNVC: 2
P856084-401: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-12-324-8103
Extension Drawer Slide

123248103
GM301-610-X-LI2354: RNCC: 3 | RNVC: 2
GM301-610-LI2354: RNCC: 5 | RNVC: 2

26 Mar 1991

5340-12-342-6766
Expansion Plug

123426766
DIN443-B60-2.0335.10: RNCC: 2 | RNVC: 2
DIN443-B60-CUZNF30: RNCC: 5 | RNVC: 2
DIN443-B60-MS: RNCC: 5 | RNVC: 2

13 Mar 1997

5340-12-192-0373
Retaining Clip

121920373
L22234-A1048-C19: RNCC: 3 | RNVC: 2
1048.4.001023.4: RNCC: 3 | RNVC: 2
0563137: RNCC: 5 | RNVC: 2
1048.4001023.4: RNCC: 5 | RNVC: 2
L22234A1048C19: RNCC: 5 | RNVC: 9

22 Mar 1982

5340-12-171-1208
Catch Strike

121711208
81915010023: RNCC: 3 | RNVC: 2
23230-172302.001.0: RNCC: 5 | RNVC: 9
23230-172302-001-0: RNCC: 5 | RNVC: 9

9 Sep 1977

5340-12-043-2661

5340-12-393-7724
Expansion Shield

123937724
078644: RNCC: 3 | RNVC: 2
FDN 6/5: RNCC: 5 | RNVC: 2

10 Oct 2013

5340-12-388-0050
Loop Clamp

123880050
7094198: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-364-4261
Mounting Bracket

123644261
5801984-981400.008.0: RNCC: 2 | RNVC: 2
5801984-981400.008.0: RNCC: 3 | RNVC: 2

24 Sep 2004

5340-12-320-2296
Manual Control Handle

123202296
1084101: RNCC: 3 | RNVC: 2

20 Dec 1989

5340-12-382-8073
Butt Hinge

123828073
1571908: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-12-390-8060
Mounting Plate

123908060
565655036: RNCC: 3 | RNVC: 2

13 Dec 2012

5340-12-320-0197
Manual Control Handle

123200197
20808-003: RNCC: 3 | RNVC: 2

28 Nov 1989

5340-12-194-7052
Spring Loaded Cylinder Fastener

121947052
4900046-10004.00: RNCC: 3 | RNVC: 2
4900046-10004-00: RNCC: 5 | RNVC: 2

30 Nov 1982

5340-12-345-3887
Mending Plate

123453887
81974802946: RNCC: 3 | RNVC: 2
81.97480-2946: RNCC: 5 | RNVC: 2

10 Mar 1998

5340-12-198-0619
Padlock

121980619
DIN7465-E1-40-BK-MIT HB 63,5MM: RNCC: 2 | RNVC: 2
85HB/40-63 MM: RNCC: 3 | RNVC: 2
85HB40-63: RNCC: 5 | RNVC: 2

15 Dec 1983

5340-12-313-0603
Mending Plate

123130603
48-1507-400000.03.0: RNCC: 3 | RNVC: 2
48-1507-400000.03.0: RNCC: 5 | RNVC: 9

1 Mar 1988

5340-12-701-6433
Angle Bracket

127016433
VG95211-ML-127016433: RNCC: 2 | RNVC: 2
5.12.7204.0201.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-183-9665
Vent Plug

121839665
111801177: RNCC: 3 | RNVC: 2

7 Jun 1980

5340-12-315-3539
Sealing Plug Assembly

123153539
1463203354: RNCC: 3 | RNVC: 2

14 Oct 1988

5340-12-011-5762

5340-12-023-3274

5340-12-022-3384

5340-12-300-8451
Pad Eye

123008451
4355510443: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-359-7237
Mechanical Stop

123597237
6410.114.000.062: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-301-9948
Angle Bracket

123019948
3816420109: RNCC: 3 | RNVC: 2

24 Nov 1984

5340-12-365-8714
Mounting Bracket

123658714
5411440340: RNCC: 3 | RNVC: 2

15 Feb 2005

5340-12-327-3546
Mending Plate

123273546
272.308 580: RNCC: 2 | RNVC: 2
272.308.580: RNCC: 3 | RNVC: 2
272.308 580: RNCC: 5 | RNVC: 9

15 Jan 1992

5340-12-309-7887
Flush Catch Claw

123097887
8100073-130.03: RNCC: 2 | RNVC: 2
8100073-130-03: RNCC: 5 | RNVC: 9
8100073-130.03: RNCC: 5 | RNVC: 9
8100073-130-03: RNCC: 5 | RNVC: 9
61.174.133-12: RNCC: 5 | RNVC: 9

27 Feb 1987

5340-12-346-1530
Dust And Moisture Seal Protective Cap

123461530
1146580: RNCC: 3 | RNVC: 2
W4297-36: RNCC: 5 | RNVC: 2

19 Jun 1998

5340-12-336-9906
Mounting Plate

123369906
4900016-501.018: RNCC: 3 | RNVC: 2
4900016-501-018: RNCC: 5 | RNVC: 9
F300 0T 012 9640: RNCC: 6 | RNVC: 9

5 Jan 1995

5340-12-311-9644
Nonmetallic Bumper

123119644
VG95092A4X1,5X11NR60: RNCC: 2 | RNVC: 2
82200-A4X1,5X11X6.NR60: RNCC: 3 | RNVC: 2
86002373: RNCC: 3 | RNVC: 2
A4X1,5X11X6.60NR: RNCC: 5 | RNVC: 2
82200-86002373ED5511-34.NR60: RNCC: 5 | RNVC: 2
86002373ED5511-34: RNCC: 5 | RNVC: 2

5 Nov 1987

5340-12-347-0506
Mounting Bracket

123470506
2300002-204019.000: RNCC: 2 | RNVC: 2
2300002-204019.000: RNCC: 3 | RNVC: 2
2300002-204019.000: RNCC: 3 | RNVC: 2

16 Oct 1998

5340-12-365-5847
Multiple Angle Bracket

123655847
J28630088-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-321-6454
Mounting Plate

123216454
4545704: RNCC: 3 | RNVC: 2
5801604-020000-002: RNCC: 5 | RNVC: 9

12 Jun 1990

5340-12-190-2369
Folding Stay

121902369
5801445-30201: RNCC: 2 | RNVC: 2
5801445-30201: RNCC: 3 | RNVC: 2
5801445-30201: RNCC: 5 | RNVC: 9

16 Nov 1981

5340-12-700-8553
Loop Clamp

127008553
VG95211-ML-127008553: RNCC: 2 | RNVC: 2
155N1119-655: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-378-4054
Angle Bracket

123784054
1686-356000-03: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-12-303-8390
Plug Button

123038390
326-52-0200-21: RNCC: 3 | RNVC: 2

7 May 1985

5340-12-311-9918
Angle Bracket

123119918
CF 332 329 A: RNCC: 2 | RNVC: 2
CF 332 329 A: RNCC: 3 | RNVC: 2
CF 332 329 A: RNCC: 5 | RNVC: 2

9 Nov 1987

5340-12-090-7557

5340-12-317-3564
Access Cover

123173564
0242 1351: RNCC: 3 | RNVC: 2
4078860: RNCC: 5 | RNVC: 2
4785753: RNCC: 5 | RNVC: 2

31 Mar 1989

5340-12-187-7798
Dust And Moisture Seal Protective Cap

121877798
TL-52: RNCC: 3 | RNVC: 2
V04406: RNCC: 5 | RNVC: 2
E1284.1 ITEM 2: RNCC: 5 | RNVC: 2
E1284.1/2: RNCC: 5 | RNVC: 2
V 4406: RNCC: 5 | RNVC: 2
V04406: RNCC: 5 | RNVC: 2
V4406: RNCC: 5 | RNVC: 9

6 May 1981

5340-12-386-1508
Manual Control Lever

123861508
2500262-193601.000.0: RNCC: 2 | RNVC: 2
2500262-193601.000.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-303-5828
Angle Bracket

123035828
P-616777-003: RNCC: 3 | RNVC: 2
P616777-003: RNCC: 5 | RNVC: 2

10 Apr 1985

5340-12-198-5090
Resilient Mount

121985090
2300109-060070.000.0: RNCC: 1 | RNVC: 2
845.2300109-060070.000.0: RNCC: 3 | RNVC: 2
2300109-060070.000.0: RNCC: 3 | RNVC: 2
2300109-060070.000.0: RNCC: 3 | RNVC: 2
2300109-060070.000.0: RNCC: 5 | RNVC: 9

3 Feb 1984

5340-12-195-6588
Loop Clamp

121956588
DIN3016-1-A1-10X12-W5: RNCC: 2 | RNVC: 2
DIN3016-A1-10X12-W5: RNCC: 3 | RNVC: 2
RS1.10/12-W5: RNCC: 3 | RNVC: 2
4110712010: RNCC: 5 | RNVC: 2
RS1.10/12-1.4571: RNCC: 5 | RNVC: 2
RS1100-10-12-1-4571: RNCC: 5 | RNVC: 2
VG95931-A10X12-1.4571: RNCC: 5 | RNVC: 9
VG95931-A10X12-W5: RNCC: 5 | RNVC: 9
DIN3016-A1-10X12-W5: RNCC: 5 | RNVC: 9

24 Mar 1983

5340-12-344-4616
Mounting Bracket

123444616
A-245427-015: RNCC: 3 | RNVC: 2
A245427-015: RNCC: 5 | RNVC: 2

29 Oct 1997

5340-12-318-0705
Resilient Mount

123180705
5418 110 BLATT101: RNCC: 3 | RNVC: 2
81.43271.0028: RNCC: 5 | RNVC: 2
5418 110/101.3: RNCC: 5 | RNVC: 2
81432710028: RNCC: 5 | RNVC: 2

8 Jun 1989

5340-12-334-7120
Snap Hook

123347120
50-S-5/8 VERZINKT: RNCC: 3 | RNVC: 9
466.315.9: RNCC: 5 | RNVC: 2
50-5/8 VERZINKT: RNCC: 5 | RNVC: 9
225-5/8 VERZINKT: RNCC: 5 | RNVC: 9

10 Jun 1994

5340-12-172-9411
Pad Eye

121729411
81411402123: RNCC: 3 | RNVC: 2
23245-150602-008-0: RNCC: 5 | RNVC: 9
23245-150602.008.0: RNCC: 5 | RNVC: 9

6 Mar 1978

5340-12-184-7743
Dust And Moisture Seal Protective Cap

121847743
5420 3 053-00: RNCC: 3 | RNVC: 2
54203053-00: RNCC: 5 | RNVC: 2
5420 3 053-00: RNCC: 5 | RNVC: 9
54203053-00: RNCC: 5 | RNVC: 9

16 Aug 1980

5340-12-335-0501
Angle Bracket

123350501
0048-201000A02B: RNCC: 2 | RNVC: 2
0048-201000A02B: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-12-372-6865
Nonmetallic Solid Wheel

123726865
BPA-POA 50G: RNCC: 3 | RNVC: 2

13 Aug 2007

5340-12-192-7844
Electrical-Mechanical Equipment Post

121927844
0871585: RNCC: 3 | RNVC: 2
087.1585: RNCC: 5 | RNVC: 2

24 May 1982

5340-12-347-2112
Spacing Threaded Standoff

123472112
54.1094.180.07: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-12-348-7914
Dust And Moisture Seal Protective Plug

123487914
874 012 44: RNCC: 3 | RNVC: 2

19 Aug 1999

5340-12-310-2068
Double Angle Bracket

123102068
S35873-02-6-229: RNCC: 3 | RNVC: 2

21 Apr 1987

5340-12-173-9614
Retaining Clip

121739614
4620 306 241: RNCC: 3 | RNVC: 2
500566777: RNCC: 5 | RNVC: 2
2112970: RNCC: 5 | RNVC: 2
1410101: RNCC: 5 | RNVC: 2
7391-348: RNCC: 5 | RNVC: 2
7391348: RNCC: 5 | RNVC: 2
4620306241: RNCC: 5 | RNVC: 2
8780297: RNCC: 5 | RNVC: 2
780297: RNCC: 5 | RNVC: 2
4620306241: RNCC: 5 | RNVC: 2

26 May 1978

5340-12-196-5933
Spring Tension Clip

121965933
C22234-A1000-C25: RNCC: 3 | RNVC: 2
C22234A1000C25: RNCC: 5 | RNVC: 2

20 Jul 1983

5340-12-321-9404
Mounting Plate

123219404
23290-013013.002: RNCC: 2 | RNVC: 2
23290-013013.002: RNCC: 3 | RNVC: 2
23290-013013.002: RNCC: 5 | RNVC: 2
23290-013013.002: RNCC: 5 | RNVC: 9

11 Jul 1990

5340-12-313-3480
Compression Cup

123133480
H24-11-88NBR/101: RNCC: 3 | RNVC: 2
125 024: RNCC: 5 | RNVC: 2
125024: RNCC: 5 | RNVC: 2
H24-11-24X38X12-88NBR/101: RNCC: 5 | RNVC: 2

23 Mar 1988

5340-12-382-9420
Loop Clamp

123829420
81974200002: RNCC: 3 | RNVC: 2
81.97420-0002: RNCC: 5 | RNVC: 2
81.97420-0002: RNCC: 5 | RNVC: 2
81974200002: RNCC: 5 | RNVC: 2

26 Aug 2010

5340-12-179-1284
Retaining Strap

121791284
5801215-57-002: RNCC: 3 | RNVC: 2
5801215-57.002: RNCC: 5 | RNVC: 2

8 Jun 1979

5340-12-392-3259
Pipe Hanger

123923259
87705008: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-318-7784
Bow Handle

123187784
DL48: RNCC: 3 | RNVC: 2

16 Aug 1989

5340-12-332-7488
Nonmetallic Bumper

123327488
734 0792: RNCC: 3 | RNVC: 2
7340792: RNCC: 5 | RNVC: 2

14 Sep 1993

5340-12-377-9131
Loop Clamp

123779131
17317092: RNCC: 3 | RNVC: 2

25 Feb 2009

5340-12-366-4108
Webbing Strap

123664108
01-300 02507: RNCC: 3 | RNVC: 2

21 Apr 2005

5340-12-133-1440

5340-12-311-5491
Plain Solid Disk

123115491
2410251001: RNCC: 3 | RNVC: 2
OD20584: RNCC: 5 | RNVC: 2
2410551001: RNCC: 5 | RNVC: 2

16 Sep 1987

5340-12-310-8710
Support Hook

123108710
382977: RNCC: 3 | RNVC: 2

3 Jul 1987

5340-12-320-7131
Catch Strike

123207131
9000 4025: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-192-1519
Mounting Bracket

121921519
4380430: RNCC: 3 | RNVC: 2
438.0430: RNCC: 5 | RNVC: 2

29 Mar 1982

5340-12-360-0028
Mounting Bracket

123600028
9414303257: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-173-6629
Spring Tension Clip

121736629
R26725: RNCC: 3 | RNVC: 2
R26725: RNCC: 5 | RNVC: 9

28 Apr 1978

5340-12-343-5477
Leather Strap

123435477
99.9999.99.01: RNCC: 3 | RNVC: 2

2 Jul 1997

5340-12-360-3533
Loop Clamp

123603533
0009550605: RNCC: 3 | RNVC: 2
0009550605: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-040-6204

5340-12-044-4687

5340-12-361-0795
Mounting Bracket

123610795
0854 2991: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-12-357-3849
Access Cover

123573849
2300042-255164.000: RNCC: 2 | RNVC: 2
2300042-255164.000: RNCC: 3 | RNVC: 2

14 Jun 2002

5340-12-195-4181
Sliding Stay

121954181
5800.7232: RNCC: 3 | RNVC: 2
58007232: RNCC: 5 | RNVC: 2
409063665: RNCC: 5 | RNVC: 2

23 Feb 1983

5340-12-317-4472
Mending Plate

123174472
07284: RNCC: 3 | RNVC: 2
07284: RNCC: 5 | RNVC: 9

10 Apr 1989

5340-12-386-0470
Double Angle Bracket

123860470
531SK4844: RNCC: 3 | RNVC: 2

3 Aug 2011

5340-12-311-9693
Access Cover

123119693
165064: RNCC: 2 | RNVC: 2
165064: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-12-312-4850
Helical Compression Spring Seat

123124850
1420324004: RNCC: 3 | RNVC: 2

12 Jan 1988

5340-12-330-9968
Ball Socket Seat

123309968
10 10 07: RNCC: 3 | RNVC: 2
10 10 07: RNCC: 5 | RNVC: 9

9 Mar 1993

5340-12-383-1448
Access Cover

123831448
40008978: RNCC: 3 | RNVC: 2
83079597: RNCC: 5 | RNVC: 2

17 Sep 2010

5340-12-374-1003
Dust And Moisture Seal Protective Plug

123741003
12H3668: RNCC: 3 | RNVC: 2

17 Jan 2008

5340-12-304-0735
Angle Bracket

123040735
6600084-670000: RNCC: 2 | RNVC: 2
56491051: RNCC: 3 | RNVC: 2
6600084-670000: RNCC: 5 | RNVC: 2

10 Jun 1985

5340-12-317-2887
Clamp Bolt Assembly

123172887
4312 711 26810: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-322-6860
Rigid Caster

123226860
10036301: RNCC: 2 | RNVC: 2
10036301: RNCC: 3 | RNVC: 2

12 Sep 1990

5340-12-321-6520
Electrical-Mechanical Equipment Post

123216520
285098: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-322-1865
Loop Clamp

123221865
54.2247.343.07: RNCC: 2 | RNVC: 2
54.2247.343.07: RNCC: 3 | RNVC: 2

31 Jul 1990

5340-12-183-6334
Mending Plate

121836334
42010487: RNCC: 3 | RNVC: 2
42010487ED5042-72: RNCC: 5 | RNVC: 2

6 May 1980

5340-12-323-6064
Hand Crank

123236064
01TC35312: RNCC: 3 | RNVC: 2

11 Dec 1990

5340-12-344-9123
Loop Clamp

123449123
214.99A: RNCC: 3 | RNVC: 2
5036458: RNCC: 5 | RNVC: 2

12 Jan 1998

5340-12-043-4221

5340-12-042-0553

5340-12-337-9664
Mounting Bracket

123379664
603 154 01 45: RNCC: 3 | RNVC: 2
6031540145: RNCC: 5 | RNVC: 2

8 May 1995

5340-12-361-1975
Manual Control Handle

123611975
CBD32539P03: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-12-341-9995
Dust And Moisture Seal Boot

123419995
0020944382: RNCC: 3 | RNVC: 2

28 Nov 1996

5340-12-352-7137
Access Cover

123527137
64416358: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-364-7792
Spacing Threaded Standoff

123647792
54.0084.667.04: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-340-7923
Double Angle Bracket

123407923
4900371-602000.01: RNCC: 2 | RNVC: 2
4900371-602000.01: RNCC: 3 | RNVC: 2

13 Jun 1996

5340-12-302-1574
Nonmetallic Bumper

123021574
3933250044: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-301-5865
Mending Plate

123015865
183805994A: RNCC: 3 | RNVC: 2

25 Oct 1984

5340-12-164-5136
Dust And Moisture Seal Protective Cap-Plug

121645136
TL4-133: RNCC: 3 | RNVC: 2
203418: RNCC: 3 | RNVC: 2
0401-2610-203418: RNCC: 5 | RNVC: 2
18NAN2034: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-186-1448
Electrical-Mechanical Equipment Post

121861448
512205-0025.000: RNCC: 3 | RNVC: 2
512205-0025-000: RNCC: 5 | RNVC: 2

2 Dec 1980

5340-12-164-8044
Retaining Band

121648044
8409271: RNCC: 3 | RNVC: 2
1604-136: RNCC: 5 | RNVC: 2
1604136: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-389-8609
Lock-Release Lever

123898609
GN604-63-M8-40-SG: RNCC: 3 | RNVC: 2
7113027: RNCC: 5 | RNVC: 2

5 Sep 2012

5340-12-167-8570
Electrical-Mechanical Equipment Post

121678570
E5-1061-24000-01: RNCC: 3 | RNVC: 2

26 Jan 1977

5340-12-308-7436
Angle Bracket

123087436
1281-12100.15: RNCC: 2 | RNVC: 2
159140: RNCC: 3 | RNVC: 2
1281-12100.15: RNCC: 5 | RNVC: 2

13 Nov 1986

5340-12-359-7221
Blank Panel

123597221
2500261-820000.013.0: RNCC: 2 | RNVC: 2
2500261-820000.013.0: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-389-4416
Electronic Equipment Hardware Kit

123894416
1.315-200010.00: RNCC: 2 | RNVC: 2
1.315-200010.00: RNCC: 5 | RNVC: 2

6 Jul 2012

5340-12-179-5482
Platte

121795482
C326-A17-C11: RNCC: 2 | RNVC: 2
C326A17C11: RNCC: 3 | RNVC: 2
C326-A17-C11: RNCC: 5 | RNVC: 2
C326A17C11: RNCC: 5 | RNVC: 2
C326-A17-C11: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-154-8312
Spring Tension Clip

121548312
51.0392.001-04: RNCC: 3 | RNVC: 2
51-0392-001-04: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-318-4588
Counterbalance Weight

123184588
1201 8098: RNCC: 3 | RNVC: 2
A26.04-59A.3: RNCC: 5 | RNVC: 2

18 Jul 1989

5340-12-386-2351
Access Cover

123862351
2500262-191140.001.0: RNCC: 2 | RNVC: 2
2500262-191140.001.0: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-12-318-0972
Mounting Bracket

123180972
140-112020-001-0: RNCC: 3 | RNVC: 2
57852-760: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-313-9510
Mending Plate

123139510
2300223-207180.01.0: RNCC: 2 | RNVC: 2
2300223-207180.01.0: RNCC: 3 | RNVC: 2
D175510220: RNCC: 5 | RNVC: 2

26 May 1988

5340-12-164-3565
Mending Plate

121643565
2360-010000.08.0: RNCC: 2 | RNVC: 2
2360-010000.08.0: RNCC: 3 | RNVC: 2
2360-010000-08-0: RNCC: 5 | RNVC: 9
2360-010000.08.0: RNCC: 5 | RNVC: 9
2360-010000.08.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-7484
Shimmy Damper

123217484
16-4-368-325-A15-B15-1000: RNCC: 3 | RNVC: 2
16-4-034-1000N-A15-B15: RNCC: 5 | RNVC: 2
522412: RNCC: 5 | RNVC: 2

21 Jun 1990

5340-12-331-5845
Loop Clamp

123315845
DIN3016-1-A1-8X12-BZ: RNCC: 2 | RNVC: 2
DIN3016-A1-8X12-BZ: RNCC: 3 | RNVC: 2
RS1.8/12-BZ: RNCC: 3 | RNVC: 2
DIN3016-A1-8X12-BRONZE: RNCC: 5 | RNVC: 9
DIN3016-A1-8X12-BZ: RNCC: 5 | RNVC: 9

25 May 1993

5340-12-176-9509
Dust And Moisture Seal Protective Cap

121769509
84053/1300-03: RNCC: 3 | RNVC: 2
84053-1300-03: RNCC: 5 | RNVC: 9

3 Jan 1979

5340-12-702-0033
Loop Clamp

127020033
VG95211-ML-127020033: RNCC: 2 | RNVC: 2
1667S50-29: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-172-9082
Detent Plunger

121729082
14021-15005-01: RNCC: 3 | RNVC: 2
893646: RNCC: 5 | RNVC: 2
14021-15005-01: RNCC: 5 | RNVC: 9

2 Mar 1978

5340-12-193-4538
Spring Loaded Cylinder Fastener

121934538
1198-14.00: RNCC: 3 | RNVC: 2
1198-14-00: RNCC: 5 | RNVC: 2

22 Jul 1982

5340-12-196-6005
Spring Tension Clip

121966005
5801435-040900.00: RNCC: 2 | RNVC: 2
5801435-040900-00: RNCC: 5 | RNVC: 9

21 Jul 1983

5340-12-302-6664
Rod End Connector

123026664
41.36.42.00.23-5: RNCC: 3 | RNVC: 2
41-36-42-00-23-5: RNCC: 5 | RNVC: 2

22 Jan 1985

5340-12-168-2818
Nonmetallic Bumper

121682818
59005901: RNCC: 3 | RNVC: 2
KE110/80KERN-D-QUALRTEIIKOMPLETT: RNCC: 3 | RNVC: 2
02463214: RNCC: 5 | RNVC: 2
2463214ED5046-04: RNCC: 5 | RNVC: 2
710415SK4: RNCC: 5 | RNVC: 2
KE110-80KERNDQUALRTE2K0MPLETT: RNCC: 5 | RNVC: 2
MGW710415SK4: RNCC: 5 | RNVC: 2
RT670349S4: RNCC: 5 | RNVC: 2
KE110-80KERNDQUALRTE2KOMPLETT: RNCC: 5 | RNVC: 2

4 Mar 1977

5340-12-321-9433
Metal Runner

123219433
702-241600-952-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-148-9547
Plain Solid Disk

121489547
594-517021: RNCC: 3 | RNVC: 2
23176-207900-04-0: RNCC: 5 | RNVC: 2
23176-207900-04-0: RNCC: 5 | RNVC: 9
23176-207900.04.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-340-3739
Retaining Strap

123403739
1206 3788: RNCC: 3 | RNVC: 2
12063788EE0116-90: RNCC: 5 | RNVC: 2
30.62-085/6.4: RNCC: 5 | RNVC: 2

30 Mar 1996

5340-12-353-0298
Access Cover

123530298
1215 4404: RNCC: 3 | RNVC: 2

22 Jan 2001

5340-12-197-6549
Angle Bracket

121976549
00001912270: RNCC: 3 | RNVC: 2
81.66912.0026: RNCC: 5 | RNVC: 2
81669120026: RNCC: 5 | RNVC: 2

10 Nov 1983

5340-12-179-5100
Mounting Bracket

121795100
4355410025: RNCC: 3 | RNVC: 2

4 Jul 1979

5340-12-381-6812
Strap Hinge

123816812
504124042: RNCC: 3 | RNVC: 2

17 Mar 2010

5340-12-300-9083
Lock-Release Lever

123009083
0006311955: RNCC: 3 | RNVC: 2
0006311955: RNCC: 5 | RNVC: 1

11 Sep 1984

5340-12-320-3007
Mending Plate

123203007
0240 4462: RNCC: 3 | RNVC: 2
02404462EE0148-22: RNCC: 5 | RNVC: 2

29 Dec 1989

5340-12-317-2017
Strapping

123172017
104: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-371-3983
Mounting Bracket

123713983
2304921: RNCC: 3 | RNVC: 2

26 Mar 2007

5340-12-366-5070
Cushioning Pad

123665070
2 0080-624: RNCC: 3 | RNVC: 2
2 0080-624: RNCC: 5 | RNVC: 2

2 May 2005

5340-12-383-8876
Spacing Threaded Standoff

123838876
5.05.604: RNCC: 3 | RNVC: 2

16 Dec 2010

5340-12-337-7268
Mounting Bracket

123377268
2300231-263400.000.0: RNCC: 2 | RNVC: 2
2300231-263400.000.0: RNCC: 3 | RNVC: 2

4 Apr 1995

5340-12-348-6691
Access Cover

123486691
SP20546: RNCC: 3 | RNVC: 2
72.4.447.0001: RNCC: 5 | RNVC: 9

3 Aug 1999

5340-12-381-4518
Angle Bracket

123814518
Z=30368: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-12-349-8206
Nonmetallic Bumper

123498206
46 71 1 242 109: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-385-4076
Instrument Mounting Clamp

123854076
00001-078A: RNCC: 3 | RNVC: 2

31 May 2011

5340-12-308-5130
Retaining Strap

123085130
VG95933HR-5X18-W1-BK: RNCC: 2 | RNVC: 2
5/2G18MMN325: RNCC: 3 | RNVC: 2
700325018206: RNCC: 3 | RNVC: 2
5-2G18MMN325: RNCC: 5 | RNVC: 9

17 Oct 1986

5340-12-702-6025
Loop Clamp

127026025
VG95211-ML-127026025: RNCC: 2 | RNVC: 2
5160A-22-1: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-344-5658
Resilient Mount

123445658
V 318: RNCC: 3 | RNVC: 2
V318: RNCC: 5 | RNVC: 2
101026-01 REFERENCE 64: RNCC: 5 | RNVC: 2
101026-01/64: RNCC: 5 | RNVC: 2
101026-04 REFERENCE 64: RNCC: 5 | RNVC: 2
101026-04/64: RNCC: 5 | RNVC: 2

7 Nov 1997

5340-12-149-4452
Retaining Clip

121494452
DIN71805-S19: RNCC: 2 | RNVC: 2
DIN71805-S19: RNCC: 3 | RNVC: 2
0034731: RNCC: 5 | RNVC: 2
4156-058: RNCC: 5 | RNVC: 2
S19DIN71805: RNCC: 5 | RNVC: 2
177-0401: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-0710
Double Angle Bracket

123010710
P-233226-437: RNCC: 3 | RNVC: 2
P233226-437: RNCC: 5 | RNVC: 2

20 Sep 1984

5340-12-159-3079
Door Handle

121593079
100330-2500.17: RNCC: 2 | RNVC: 2
100330-2500.17: RNCC: 3 | RNVC: 2
100330-2500.17: RNCC: 5 | RNVC: 9
100330-2500-17: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-141-5549
Nonmetallic Bumper

121415549
81150-50,8X38-1/2 IN.NR55.ST: RNCC: 3 | RNVC: 2
38555BSTN5590: RNCC: 3 | RNVC: 2
38555FI65: RNCC: 5 | RNVC: 2
38555FJ65: RNCC: 5 | RNVC: 2
38555SM550: RNCC: 5 | RNVC: 2
38555,NR55ST: RNCC: 5 | RNVC: 2
50020661: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-9453
Rod End Clevis

127019453
VG95211-ML-127019453: RNCC: 2 | RNVC: 2
5.12.3000.2001.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-365-5826
Angle Bracket

123655826
J28130113-405: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-702-6014
Loop Clamp

127026014
VG95211-ML-127026014: RNCC: 2 | RNVC: 2
5158A-14: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-390-6105
Mounting Bracket

123906105
1K4300.28255: RNCC: 3 | RNVC: 2
7118314: RNCC: 5 | RNVC: 2

28 Nov 2012

5340-12-335-8676
Loop Clamp

123358676
4900317-610000.00: RNCC: 2 | RNVC: 2
4900317-610000.00: RNCC: 5 | RNVC: 2

27 Sep 1994

5340-12-304-5673
Double Angle Bracket

123045673
0241 5687: RNCC: 3 | RNVC: 2
02415687EZ0147-39: RNCC: 5 | RNVC: 2

31 Jul 1985

5340-12-128-6845

5340-12-042-4869

5340-12-340-2608
Expansion Plug

123402608
7780 035 120: RNCC: 3 | RNVC: 2
(241)A39630-114893: RNCC: 5 | RNVC: 2
8196559: RNCC: 5 | RNVC: 2

20 Mar 1996

5340-12-178-7095
Nut And Bolt Locking Plate

121787095
8709940332: RNCC: 2 | RNVC: 2
8709940332: RNCC: 3 | RNVC: 2

14 May 1979

5340-12-340-1130
Mounting Bracket

123401130
1206 3800: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-12-305-7638
Nonmetallic Bumper

123057638
106060: RNCC: 3 | RNVC: 2

10 Dec 1985

5340-12-367-6998
Retaining Strap

123676998
758733: RNCC: 3 | RNVC: 2
50388100: RNCC: 5 | RNVC: 2

27 Sep 2005

5340-12-367-9886
Retaining Band

123679886
DF412175A: RNCC: 3 | RNVC: 2

15 Nov 2005

5340-12-319-6824
Butt Hinge

123196824
5525101: RNCC: 3 | RNVC: 2

25 Oct 1989

5340-12-348-5974
Mounting Bracket

123485974
NN31224P01: RNCC: 3 | RNVC: 2

23 Jul 1999

5340-12-372-5547
Spring Tension Clip

123725547
0007270146: RNCC: 3 | RNVC: 2

27 Jul 2007

5340-12-011-4906

5340-12-702-6414
Threaded End Tensioning Tie Rod

127026414
VG95211-ML-127026414: RNCC: 2 | RNVC: 2
8CH10 AMG2MPR OST1 30038-71: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-187-3569
Electrical-Mechanical Equipment Post

121873569
VG95148B5,5XM3X51-AL: RNCC: 2 | RNVC: 2
475.8048: RNCC: 3 | RNVC: 2
VG95148B5,5XM3X51-AL: RNCC: 3 | RNVC: 2
4758048: RNCC: 5 | RNVC: 9

2 Apr 1981

5340-12-158-0798
Handwheel

121580798
510111041: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-322-8183
Loop Clamp

123228183
LN416PA: RNCC: 3 | RNVC: 2

25 Sep 1990

5340-12-364-5153
Nonmetallic Bumper

123645153
5160-311120A02B: RNCC: 2 | RNVC: 2
5160-311120A02B: RNCC: 3 | RNVC: 2

6 Oct 2004

5340-12-701-4927
Mounting Plate

127014927
VG95211-ML-127014927: RNCC: 2 | RNVC: 2
5.12.5850.0306.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-162-6544
Flush Lock

121626544
81626806018: RNCC: 3 | RNVC: 2
21-031-300-3: RNCC: 5 | RNVC: 2
81.62680-6018: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-324-5880
Mounting Plate

123245880
160-78071-03: RNCC: 3 | RNVC: 2
160-78071-03: RNCC: 5 | RNVC: 9

4 Mar 1991

5340-12-383-9882
Angle Bracket

123839882
V6546-01100-174: RNCC: 3 | RNVC: 2

6 Jan 2011

5340-12-334-3572
Angle Bracket

123343572
105-80411.03: RNCC: 3 | RNVC: 2
105-80411-03: RNCC: 5 | RNVC: 2

29 Apr 1994

5340-12-311-0758
Nonmetallic Bumper

123110758
5802284-121000.05: RNCC: 2 | RNVC: 2
82200-5802284-121000.05: RNCC: 3 | RNVC: 2
4312 712 64310: RNCC: 3 | RNVC: 2

23 Jul 1987

5340-12-318-8489
Manual Control Handle

123188489
1700013-30930.00: RNCC: 2 | RNVC: 2
297137: RNCC: 3 | RNVC: 2
1700013-30930.00: RNCC: 5 | RNVC: 9

22 Aug 1989

5340-12-338-6669
Webbing Strap

123386669
424-G406-0002: RNCC: 3 | RNVC: 2

14 Aug 1995

5340-12-393-6734
Combin Roller Unit

123936734
21322-1243120: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-190-3263
Detent Plunger

121903263
100053-103.03: RNCC: 3 | RNVC: 2
100053-103-03: RNCC: 5 | RNVC: 2

23 Nov 1981

5340-12-184-3597
Mounting Bracket

121843597
5801357-1900-01F: RNCC: 2 | RNVC: 2
5801357-1900-01F: RNCC: 5 | RNVC: 2
5801357-1900-01F: RNCC: 5 | RNVC: 2

19 Jul 1980

5340-12-182-1855
Bow Handle

121821855
C280-A13-C19: RNCC: 2 | RNVC: 2
C280-A13-C19: RNCC: 3 | RNVC: 2
C280-A13-C19: RNCC: 5 | RNVC: 2
C280A13C19: RNCC: 5 | RNVC: 9
C280A13C19: RNCC: 5 | RNVC: 9

18 Jan 1980

5340-12-126-3969
Webbing Strap

121263969
390003-30.21: RNCC: 2 | RNVC: 2
390003/30-21: RNCC: 3 | RNVC: 2
390003-30.21: RNCC: 5 | RNVC: 2
700730033: RNCC: 5 | RNVC: 9
700730033: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-187-5561
Webbing Strap

121875561
5801435-010500.00: RNCC: 3 | RNVC: 2
5801435-010500-00: RNCC: 5 | RNVC: 9
000-A3-25X2,5X700-BW-RAL6031: RNCC: 6 | RNVC: 9

15 Apr 1981

5340-12-143-4871
Mending Plate

121434871
F0154-21-30-06: RNCC: 3 | RNVC: 2
0336 9649: RNCC: 5 | RNVC: 2
0154-21-30-06: RNCC: 5 | RNVC: 2
3369649EF0154-21: RNCC: 5 | RNVC: 2
3369649: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-179-1942
Halter

121791942
3817520021: RNCC: 3 | RNVC: 2

15 Jun 1979

5340-12-328-4913
Runner

123284913
4617220749: RNCC: 3 | RNVC: 2

23 May 1992

5340-12-360-7144
Mounting Bracket

123607144
701 805 191A: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-358-1743
Quick Release Plunger

123581743
GN616-M16-SN: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-12-701-6078
Angle Bracket

127016078
VG95211-ML-127016078: RNCC: 2 | RNVC: 2
5.12.7003.1160.04: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7249
Angle Bracket

127017249
VG95211-ML-127017249: RNCC: 2 | RNVC: 2
5.12.7602.0290.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-341-0524
Flush Bolt

123410524
SK475-183000.011.0: RNCC: 3 | RNVC: 2
1805743: RNCC: 5 | RNVC: 2

23 Jul 1996

5340-12-392-7543
Mounting Bracket

123927543
1865-010431.01.0: RNCC: 3 | RNVC: 2
7073211: RNCC: 5 | RNVC: 2

4 Jul 2013

5340-12-701-5432
Mounting Bracket

127015432
VG95211-ML-127015432: RNCC: 2 | RNVC: 2
5.12.6110.1410.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-382-6159
Spring Holder

123826159
28599: RNCC: 3 | RNVC: 2
600-45.4.191-086: RNCC: 5 | RNVC: 2

16 Jul 2010

5340-12-364-6575
Belt-Strap Keeper

123646575
2653-183700.011.0: RNCC: 2 | RNVC: 2
2653-183700.011.0: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-701-6633
Angle Bracket

127016633
VG95211-ML-127016633: RNCC: 2 | RNVC: 2
5.12.7210.1470.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-4633
Retaining Strap

121874633
2300109-063111.005.0: RNCC: 2 | RNVC: 2
2300109-063111.005.0: RNCC: 3 | RNVC: 2
2300109-063111.005.0: RNCC: 3 | RNVC: 2
2300109-063111-005-0: RNCC: 5 | RNVC: 9
2300109-063111.005.0: RNCC: 5 | RNVC: 9
2300109-063111-005-0: RNCC: 5 | RNVC: 9
2300109-063111-005-0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-308-0977
Electrical-Mechanical Equipment Post

123080977
KMS013-213011.011.0: RNCC: 3 | RNVC: 2

2 Sep 1986

5340-12-339-1460
Mounting Plate

123391460
4083310440: RNCC: 3 | RNVC: 2

17 Oct 1995

5340-12-318-5723
Mending Plate

123185723
4585101: RNCC: 3 | RNVC: 2

28 Jul 1989

5340-12-370-4336
Angle Bracket

123704336
7803200292AA: RNCC: 3 | RNVC: 2

7 Nov 2006

5340-12-700-8701
Loop Clamp

127008701
VG95211-ML-127008701: RNCC: 2 | RNVC: 2
155N464-79: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-171-0844
Butt Hinge

121710844
9321: RNCC: 3 | RNVC: 2
81.97201-0141: RNCC: 5 | RNVC: 2
81972010141: RNCC: 5 | RNVC: 2

7 Sep 1977

5340-12-361-5535
Mounting Plate

123615535
8854 108-191: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-12-356-7069
Block Clamp

123567069
64453036: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-312-0022
Retaining Clip

123120022
4522538901: RNCC: 3 | RNVC: 2
(7001)5340123120022: RNCC: 5 | RNVC: 2

10 Nov 1987

5340-12-312-3124
Mounting Bracket

123123124
2243524019: RNCC: 3 | RNVC: 2
22435 24019: RNCC: 5 | RNVC: 9

15 Dec 1987

5340-12-359-7112
Mounting Bracket

123597112
9483250131: RNCC: 3 | RNVC: 2

4 Mar 2003

5340-12-319-9310
Compression Cup

123199310
15.1111.1012: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-12-366-4448
Angle Bracket

123664448
2 0071-238: RNCC: 3 | RNVC: 2
2 0071-238: RNCC: 5 | RNVC: 2

26 Apr 2005

5340-12-394-2008
Bumper

123942008
2-80145331: RNCC: 3 | RNVC: 2

11 Nov 2013

5340-12-179-6008
Dust And Moisture Seal Protective Cap

121796008
402.060: RNCC: 3 | RNVC: 2
0009871145: RNCC: 5 | RNVC: 2

11 Jul 1979

5340-12-351-8076
Nonmetallic Bumper

123518076
10063-231300.02: RNCC: 3 | RNVC: 2
10063-231300.02: RNCC: 5 | RNVC: 9

28 Aug 2000

5340-12-180-2138
Loop Clamp

121802138
03436113: RNCC: 3 | RNVC: 2
3436113EE5034-71: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-351-9100
Block Clamp

123519100
JN0093GG46: RNCC: 3 | RNVC: 2

14 Sep 2000

5340-12-305-8365
Schlosz Schluessel

123058365
609A069/1022: RNCC: 3 | RNVC: 2
C 3759 105: RNCC: 3 | RNVC: 2
C 3759 105: RNCC: 5 | RNVC: 2

20 Dec 1985

5340-12-357-9193
Dust And Moisture Seal Protective Cover

123579193
2300388-250320.000: RNCC: 2 | RNVC: 2
2300388-250300.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-355-3382
Mounting Plate

123553382
V6507-20075-105: RNCC: 2 | RNVC: 2
V6507-20075-105: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-12-314-1169
Mending Plate

123141169
510252-3551.000: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-12-356-6329
Mounting Bracket

123566329
J92222237-403: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-122-2860
Resilient Mount

121222860
3045000012: RNCC: 3 | RNVC: 2
845-3045000012: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-190-3780
Loop Clamp

121903780
PAN4231BBCCD6620: RNCC: 3 | RNVC: 2

24 Nov 1981

5340-12-378-8654
Helical Compression Spring Retainer

123788654
XP53518300016: RNCC: 3 | RNVC: 2

20 May 2009

5340-12-182-6859
Dust And Moisture Seal Protective Plug

121826859
500B78: RNCC: 3 | RNVC: 2
GPN500B78: RNCC: 5 | RNVC: 2
020-042-1-37: RNCC: 5 | RNVC: 2
500007800: RNCC: 5 | RNVC: 9
B78: RNCC: 5 | RNVC: 9
B78GPN500: RNCC: 5 | RNVC: 9
GPN500,B78: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-12-185-0702
Angle Bracket

121850702
556-865210-030: RNCC: 3 | RNVC: 2

6 Sep 1980

5340-12-362-2725
Nonmetallic Bumper

123622725
J92228445-001: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-340-6535
Mounting Bracket

123406535
5801984-208000.004.0: RNCC: 2 | RNVC: 2
5801984-208000.004.0: RNCC: 3 | RNVC: 2

18 May 1996

5340-12-701-8450
Loop Clamp

127018450
VG95211-ML-127018450: RNCC: 2 | RNVC: 2
5149A-55: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-5921
Resilient Mount

123425921
38965/1-211-04: RNCC: 3 | RNVC: 2
38965/1-211-04.NBR55.ST: RNCC: 3 | RNVC: 2
9400000038965/1-2: RNCC: 5 | RNVC: 2
SCHWINGUNGSDAMPFER38965/1-4.14.2: RNCC: 5 | RNVC: 2
SCHWINGUNGSDAMPFER38965/1-2.12.2: RNCC: 5 | RNVC: 9

4 Mar 1997

5340-12-194-4609
Pipe Bracket

121944609
53001-02.10.00.0: RNCC: 3 | RNVC: 2
53001-02.10.00.0: RNCC: 5 | RNVC: 9

4 Nov 1982

5340-12-376-8186
Spring Loaded Cylinder Fastener

123768186
GN 612-8-M16X1.5-AK-NI: RNCC: 3 | RNVC: 2
GN.34317: RNCC: 5 | RNVC: 2

10 Nov 2008

5340-12-193-8413
Lock-Release Lever

121938413
C22136-A1000-C850: RNCC: 3 | RNVC: 2
C22136A1000C850: RNCC: 5 | RNVC: 2

6 Sep 1982

5340-12-181-1973
Loop Clamp

121811973
DIN3016-1-D1-42X20-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.42/20: RNCC: 3 | RNVC: 2
DIN3016-D1-42X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1100-42-20: RNCC: 5 | RNVC: 2
RSGU1100.42/20: RNCC: 5 | RNVC: 2
9410020042: RNCC: 5 | RNVC: 2
VG95931-D42X20-W1: RNCC: 5 | RNVC: 9
DIN3016-D1-42X20-W1-2: RNCC: 5 | RNVC: 9
VG95931D42X20W1: RNCC: 5 | RNVC: 9

31 Oct 1979

5340-12-305-9808
Manual Control Handle

123059808
1865-010250.02.0: RNCC: 3 | RNVC: 9

16 Jan 1986

5340-12-365-5833
Angle Bracket

123655833
J28230108-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-354-9186
Mounting Bracket

123549186
P-876116-005: RNCC: 3 | RNVC: 2

5 Sep 2001

5340-12-359-2854
Mending Plate

123592854
2500238-080700.001.0: RNCC: 3 | RNVC: 2

20 Jan 2003

5340-12-315-1179
Electrical-Mechanical Equipment Post

123151179
VG95148B8XM5X65-NRST: RNCC: 2 | RNVC: 2
C249-A33-C42: RNCC: 2 | RNVC: 2
C249-A33-C42: RNCC: 3 | RNVC: 2
VG95148B8XM5X65-NRST: RNCC: 3 | RNVC: 2

17 Sep 1988

5340-12-193-3670
Electrical-Mechanical Equipment Post

121933670
VG95148B8XM5X15-ST: RNCC: 2 | RNVC: 2
601-085: RNCC: 3 | RNVC: 2
VG95148B8XM5X15-ST: RNCC: 3 | RNVC: 2

14 Jul 1982

5340-12-367-2217
Mortise Lock

123672217
15315/30: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-12-024-6538

5340-12-196-1963
Loop Clamp

121961963
5801999-660001.00: RNCC: 3 | RNVC: 2
5801999-660001.00: RNCC: 5 | RNVC: 9

13 Jun 1983

5340-12-125-2205

5340-12-362-9327
Mounting Bracket

123629327
4617700214: RNCC: 3 | RNVC: 2
S 721 1 75 133 2: RNCC: 5 | RNVC: 9

16 Apr 2004

5340-12-197-5269
Loop Clamp

121975269
23110-3700.31: RNCC: 2 | RNVC: 2
23110-3700.31: RNCC: 3 | RNVC: 2
23110-3700-31: RNCC: 5 | RNVC: 9
23110-3700.31: RNCC: 5 | RNVC: 9
23110-3700-31: RNCC: 5 | RNVC: 9
23110-3700.31: RNCC: 5 | RNVC: 9

28 Oct 1983

5340-12-353-7080
Handle Grip

123537080
49255001325: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-171-4834
Spring Tension Clip

121714834
5005339236: RNCC: 3 | RNVC: 2

17 Oct 1977

5340-12-195-0248
Dust And Moisture Seal Protective Cap

121950248
0851 3245: RNCC: 3 | RNVC: 2
8513245: RNCC: 5 | RNVC: 2
8513245FE913405S: RNCC: 5 | RNVC: 2

3 Jan 1983

5340-12-382-6899
Plug Button

123826899
5300.221.082.000: RNCC: 3 | RNVC: 2
10332881: RNCC: 6 | RNVC: 9

26 Jul 2010

5340-12-360-4100
Dust And Moisture Seal Protective Cap

123604100
0009643718: RNCC: 3 | RNVC: 2
0009643718: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-348-1586
Angle Bracket

123481586
7003742: RNCC: 3 | RNVC: 2

26 Apr 1999

5340-12-186-9257
Access Cover

121869257
5255300042: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-12-372-7531
Shimmy Damper

123727531
6736823208: RNCC: 3 | RNVC: 2

17 Aug 2007

5340-12-348-7104
Mounting Bracket

123487104
2300387-640200.001: RNCC: 2 | RNVC: 2
9909051: RNCC: 3 | RNVC: 2
2300387-640200.001: RNCC: 5 | RNVC: 2
9909501: RNCC: 5 | RNVC: 2
2300387-640200.001: RNCC: 5 | RNVC: 9
9909501: RNCC: 5 | RNVC: 9

10 Aug 1999

5340-12-022-0802

5340-12-168-5708
Mending Plate

121685708
1000025-810300.06: RNCC: 3 | RNVC: 2
1000025-810300-06: RNCC: 3 | RNVC: 2
1000025-810300-06: RNCC: 5 | RNVC: 9
1000025-810300.06: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-171-3330
Retaining Band

121713330
81974606036: RNCC: 3 | RNVC: 2
81974600015: RNCC: 5 | RNVC: 2

30 Sep 1977

5340-12-370-5083
Access Cover

123705083
7803201130AA: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-12-380-7614
Lock-Release Lever

123807614
534414: RNCC: 3 | RNVC: 2

26 Nov 2009

5340-12-362-1372
Dust And Moisture Seal Protective Cap

123621372
JN0521-05B: RNCC: 3 | RNVC: 2

14 Jan 2004

5340-12-313-0171
Double Angle Bracket

123130171
P-086147-070: RNCC: 3 | RNVC: 2
P086147-070: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-700-8512
Loop Clamp

127008512
VG95211-ML-127008512: RNCC: 2 | RNVC: 2
155N1119-177: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-177-4047
Butt Hinge

121774047
9765: RNCC: 3 | RNVC: 2
81.97201-2171: RNCC: 5 | RNVC: 2
81972012171: RNCC: 5 | RNVC: 2

31 Jan 1979

5340-12-157-2844
Angle Bracket

121572844
773-204-06: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-701-6383
Angle Bracket

127016383
VG95211-ML-127016383: RNCC: 2 | RNVC: 2
5.12.7070.1510.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-043-9893

5340-12-310-6689
Lock-Release Lever

123106689
09658: RNCC: 3 | RNVC: 2

12 Jun 1987

5340-12-391-4838
Loop Clamp

123914838
I006466: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-310-4635
Angle Bracket

123104635
1000104-602200.04: RNCC: 3 | RNVC: 2
1000104-602200.04: RNCC: 5 | RNVC: 9

25 May 1987

5340-12-349-1919
Webbing Strap

123491919
83335019: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-355-3342
Double Angle Bracket

123553342
1000042-113320.12: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-12-301-2735
Angle Bracket

123012735
2300106-260300.12: RNCC: 2 | RNVC: 2
2300106-260300.12: RNCC: 5 | RNVC: 9
2300106-260300.12: RNCC: 5 | RNVC: 9

3 Oct 1984

5340-12-382-6197
Mending Plate

123826197
82420220010: RNCC: 3 | RNVC: 2
82.42022.0010: RNCC: 5 | RNVC: 2

16 Jul 2010

5340-12-070-1173

5340-12-050-3833

5340-12-360-5797
Padlock

123605797
DIN7465-D3-50-ZN-MS-ST: RNCC: 2 | RNVC: 2
466 ZM/SKW/50 MM: RNCC: 3 | RNVC: 2

11 Jun 2003

5340-12-350-6054
Mounting Plate

123506054
2125-111400.05B: RNCC: 2 | RNVC: 2
2125-111400.05B: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-12-164-6480
Dust And Moisture Seal Protective Plug

121646480
681-22220-03: RNCC: 3 | RNVC: 2
681-22220-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-393-5198
Angle Bracket

123935198
11.29225-0049: RNCC: 3 | RNVC: 2
11.29225-0049: RNCC: 5 | RNVC: 2

20 Sep 2013

5340-12-337-0300
Access Cover

123370300
52.0271.171.00: RNCC: 3 | RNVC: 2

12 Jan 1995

5340-12-319-9652
Dust And Moisture Seal Protective Cap

123199652
0240 4531: RNCC: 3 | RNVC: 2
02404531EE0147-51: RNCC: 5 | RNVC: 2

23 Nov 1989

5340-12-122-0346

5340-12-186-5016
Nonmetallic Bumper

121865016
344012251: RNCC: 3 | RNVC: 2

9 Jan 1981

5340-12-362-3427
Bow Handle

123623427
704261608: RNCC: 3 | RNVC: 2

10 Feb 2004

5340-12-183-1462
Rod End Clevis

121831462
2454501: RNCC: 3 | RNVC: 2

20 Mar 1980

5340-12-365-4506
Multiple Angle Bracket

123654506
04090300: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-12-319-7188
Resilient Mount

123197188
B7507711: RNCC: 3 | RNVC: 9
02532404: RNCC: 5 | RNVC: 2
02532404ED5049-04: RNCC: 5 | RNVC: 2

27 Oct 1989

5340-12-179-7234
Clamping Catch

121797234
5941650: RNCC: 3 | RNVC: 2

23 Jul 1979

5340-12-190-9394
Nonmetallic Bumper

121909394
4069875060: RNCC: 3 | RNVC: 2

23 Dec 1981

5340-12-183-6333
Angle Bracket

121836333
04473665: RNCC: 3 | RNVC: 2
4473665EE5023-72: RNCC: 5 | RNVC: 2

6 May 1980

5340-12-020-7139

5340-12-313-4258
Nonmetallic Bumper

123134258
2001000128: RNCC: 3 | RNVC: 2
134/2175-12-00-43: RNCC: 5 | RNVC: 2
3100/2175-12-00-43: RNCC: 5 | RNVC: 9

30 Mar 1988

5340-12-355-3383
Bow Handle

123553383
V6507-20075-081: RNCC: 2 | RNVC: 2
V6507-20075-081: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-12-186-6734
Door Button

121866734
6020203: RNCC: 3 | RNVC: 2
909685001: RNCC: 5 | RNVC: 2
7300035-1000-01: RNCC: 5 | RNVC: 2

26 Jan 1981

5340-12-365-0963
Bow Handle

123650963
AG-28.R160.14: RNCC: 3 | RNVC: 2
407795: RNCC: 5 | RNVC: 2

27 Nov 2004

5340-12-371-7661
Nonmetallic Bumper

123717661
9153420051: RNCC: 3 | RNVC: 2
467-435/5342-02-20-00: RNCC: 5 | RNVC: 2

14 May 2007

5340-12-176-2490
Butt Hinge Leaf

121762490
23302-182110.08: RNCC: 2 | RNVC: 2
2608329: RNCC: 3 | RNVC: 2
2608-329: RNCC: 5 | RNVC: 2

23 Nov 1978

5340-12-375-8930
Handwheel

123758930
F1.4211-50-30-00.00-30: RNCC: 3 | RNVC: 2
H38154: RNCC: 5 | RNVC: 2

17 Jul 2008

5340-12-172-8876
Webbing Strap

121728876
23110-4110.00: RNCC: 2 | RNVC: 2
23110-4110.00: RNCC: 3 | RNVC: 2
96510001: RNCC: 3 | RNVC: 2
965 100 01: RNCC: 5 | RNVC: 2
82300-23110-4110.00: RNCC: 5 | RNVC: 2
23110-4110.00: RNCC: 5 | RNVC: 9
23110-4110-00: RNCC: 5 | RNVC: 9
23110-4110-00: RNCC: 5 | RNVC: 9
82300-M260X20-NR-STZN-SW: RNCC: 6 | RNVC: 9

2 Mar 1978

5340-12-342-2647
Helical Compression Spring Seat

123422647
065031 231 22 01 00: RNCC: 3 | RNVC: 2

13 Jan 1997

5340-12-179-5090
Angle Bracket

121795090
3523010040: RNCC: 3 | RNVC: 2

4 Jul 1979

5340-12-348-0372
Mounting Bracket

123480372
982 260 44: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-12-179-5081
Mounting Bracket

121795081
CF 432 678 A: RNCC: 3 | RNVC: 2
CF 432 678 A: RNCC: 5 | RNVC: 2
CF 432 678 A: RNCC: 5 | RNVC: 2
CF432678A: RNCC: 5 | RNVC: 9
CF432678A: RNCC: 5 | RNVC: 9
CF432678A: RNCC: 5 | RNVC: 9

4 Jul 1979

5340-12-312-3480
Angle Bracket

123123480
65.7105.710.03-A002: RNCC: 3 | RNVC: 2

18 Dec 1987

5340-12-322-9993
Mounting Bracket

123229993
6731283: RNCC: 3 | RNVC: 2
6726433: RNCC: 5 | RNVC: 2
6726433: RNCC: 5 | RNVC: 9
6731283: RNCC: 5 | RNVC: 9

16 Oct 1990

5340-12-322-8276
Lock-Release Lever

123228276
6735146: RNCC: 2 | RNVC: 2
6735146: RNCC: 3 | RNVC: 2
6735146: RNCC: 5 | RNVC: 9

26 Sep 1990

5340-12-167-3398

5340-12-304-3477
Clamping Catch

123043477
NO PRIMARY REF 12-304-3477: RNCC: 3 | RNVC: 2
5790 168869: RNCC: 5 | RNVC: 9
5790168869: RNCC: 5 | RNVC: 9

10 Jul 1985

5340-12-164-9012
Nonmetallic Bumper

121649012
909820810: RNCC: 3 | RNVC: 2
E7101-85-100.14: RNCC: 3 | RNVC: 2
E7101-85-100-14: RNCC: 5 | RNVC: 2
E7101-85-100.14: RNCC: 5 | RNVC: 2
E7101-85-100-14: RNCC: 5 | RNVC: 9
E7101-85-100.14: RNCC: 5 | RNVC: 9
E909820810: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-700-3038
Dust And Moisture Seal Protective Plug

127003038
51-200902054: RNCC: 2 | RNVC: 2
2A28/12: RNCC: 3 | RNVC: 2
2A28-12: RNCC: 5 | RNVC: 9

6 Dec 1991

5340-12-322-2871
Resilient Mount

123222871
17/1691: RNCC: 3 | RNVC: 2
523112: RNCC: 5 | RNVC: 2
17-1691: RNCC: 5 | RNVC: 2
17/1691: RNCC: 5 | RNVC: 2

8 Aug 1990

5340-12-183-2081
Bail Handle

121832081
56-0049-501-02: RNCC: 3 | RNVC: 2

25 Mar 1980

5340-12-321-8470
Mending Plate

123218470
C249-A32-C33: RNCC: 2 | RNVC: 2
C249-A32-C33: RNCC: 3 | RNVC: 2

3 Jul 1990

5340-12-317-5147
Nonmetallic Bumper

123175147
98400068: RNCC: 3 | RNVC: 2
21712-012: RNCC: 5 | RNVC: 2
21712012: RNCC: 5 | RNVC: 2

14 Apr 1989

5340-12-366-1865
Block Clamp

123661865
LNGF 212/12 PA: RNCC: 3 | RNVC: 2
5010571732: RNCC: 5 | RNVC: 2

17 Mar 2005

5340-12-304-4360
Metal Runner

123044360
537161-3014.000: RNCC: 3 | RNVC: 2
537161-3014.000: RNCC: 5 | RNVC: 9

17 Jul 1985

5340-12-190-2563
Steel Beam Flange Clip

121902563
C22334-A1000-C137: RNCC: 3 | RNVC: 2
C22334A1000C137: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-176-3866
Clamp Bolt Assembly

121763866
5900062-0172: RNCC: 3 | RNVC: 2
5900062-0172: RNCC: 5 | RNVC: 9

27 Nov 1978

5340-12-165-3575
Mending Plate

121653575
307.141-10001.02: RNCC: 3 | RNVC: 2
0307141-10001-02: RNCC: 5 | RNVC: 9

23 Apr 1976

5340-12-320-6867
Snap Hook

123206867
1811/25-A3P: RNCC: 3 | RNVC: 2

7 Feb 1990

5340-12-360-1399
Mounting Bracket

123601399
GM765133: RNCC: 3 | RNVC: 9

10 Apr 2003

5340-12-382-2234
Mounting Plate

123822234
108082110001: RNCC: 3 | RNVC: 2

25 May 2010

5340-12-320-2301
Lock-Release Lever

123202301
1360.12.06.427: RNCC: 3 | RNVC: 2

20 Dec 1989

5340-12-382-4616
Multiple Angle Bracket

123824616
250385: RNCC: 3 | RNVC: 2

25 Jun 2010

5340-12-178-0044
Support Hook

121780044
861204: RNCC: 3 | RNVC: 2
3210002: RNCC: 5 | RNVC: 9

14 Mar 1979

5340-12-175-1103
An Scharnierlappen

5340-12-010-8491

5340-12-199-5336
Webbing Strap

121995336
5801435-507000.00: RNCC: 2 | RNVC: 2
5801435-507000-00: RNCC: 5 | RNVC: 2
5801435-507000.00: RNCC: 5 | RNVC: 2
5801435-507000.00: RNCC: 5 | RNVC: 9
9835275: RNCC: 5 | RNVC: 9
000-G1-25X2,0X550X125-PE-RAL6031: RNCC: 6 | RNVC: 9

9 May 1984

5340-12-177-3174
Helical Compression Spring Seat

121773174
S24-300-04: RNCC: 3 | RNVC: 2

29 Jan 1979

5340-12-349-7849
Angle Bracket

123497849
FAST-201300.01: RNCC: 2 | RNVC: 2
FAST-201300.01: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-166-1573
Spring Tension Clip

121661573
TWH01-447: RNCC: 3 | RNVC: 2
TWH01-447: RNCC: 5 | RNVC: 2

10 Aug 1976

5340-12-300-4592
Sealing Plug Assembly

123004592
E4-2013360: RNCC: 3 | RNVC: 2
E4-2013360: RNCC: 5 | RNVC: 9
E4-2013360: RNCC: 5 | RNVC: 9

3 Aug 1984

5340-12-307-1411
Electrical-Mechanical Equipment Post

123071411
TD2040/07: RNCC: 3 | RNVC: 2

14 May 1986

5340-12-198-9410
Hinge Torsion Bar

121989410
27 0318 070: RNCC: 2 | RNVC: 2
9859897: RNCC: 3 | RNVC: 9
27 0318 070: RNCC: 5 | RNVC: 2
27 0318 070: RNCC: 5 | RNVC: 9

14 Mar 1984

5340-12-011-4732

5340-12-358-7887
Mounting Bracket

123587887
461 310 1409: RNCC: 3 | RNVC: 2

14 Nov 2002

Load More Results