What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 29 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 29 of 178

5340-12-393-6694
Mounting Plate

123936694
4100098-723110.008.0: RNCC: 2 | RNVC: 2
4100098-723110.008.0: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-306-0657
Angle Bracket

123060657
5801984-983200.001.0: RNCC: 2 | RNVC: 2
5801984-983200.001.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-354-3152
Double Angle Bracket

123543152
4274267740: RNCC: 3 | RNVC: 2

29 Jun 2001

5340-12-372-8429
Buckle

123728429
03330: RNCC: 3 | RNVC: 2

27 Aug 2007

5340-12-341-4379
Mounting Plate

123414379
0289 9307: RNCC: 3 | RNVC: 2

5 Sep 1996

5340-12-132-8924

5340-12-132-7640

5340-12-195-3759
Shimmy Damper

121953759
65.7112.515.07-A001: RNCC: 3 | RNVC: 2
186341: RNCC: 5 | RNVC: 2

17 Feb 1983

5340-12-363-1141
Mounting Plate

123631141
1873-830000.020.0: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-322-8268
Mounting Bracket

123228268
71.2.238.0003: RNCC: 2 | RNVC: 2
SP18951: RNCC: 3 | RNVC: 2
71.2.238.0003: RNCC: 5 | RNVC: 9

26 Sep 1990

5340-12-363-1492
Loop Clamp

123631492
1216 5921: RNCC: 3 | RNVC: 2
6.321.4.977.015.4: RNCC: 5 | RNVC: 2

6 May 2004

5340-12-194-6536
Mending Plate

121946536
75E9.5.5: RNCC: 3 | RNVC: 2

25 Nov 1982

5340-12-334-7123
Mounting Plate

123347123
401430: RNCC: 3 | RNVC: 2

10 Jun 1994

5340-12-335-5229
Angle Bracket

123355229
0048-215000A01B: RNCC: 2 | RNVC: 2
0048-215000A01B: RNCC: 3 | RNVC: 2

26 Aug 1994

5340-12-128-6524

5340-12-328-9596
Electrical-Mechanical Equipment Post

123289596
53.1717.813.10: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-319-6353
Angle Bracket

123196353
4325000514: RNCC: 3 | RNVC: 2

19 Oct 1989

5340-12-316-1537
Strap Hinge

123161537
3817500051: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-315-1818
Electrical-Mechanical Equipment Post

123151818
1392253-200020.47: RNCC: 3 | RNVC: 2
1392253-200020.47: RNCC: 5 | RNVC: 9
1392253-200020.47: RNCC: 5 | RNVC: 9
1392253-200020.47: RNCC: 5 | RNVC: 9

27 Sep 1988

5340-12-355-9922
Dust And Moisture Seal Protective Plug

123559922
86279: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-12-362-8523
Double Angle Bracket

123628523
51-76811: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-12-310-3510
Lock-Release Lever

123103510
38012-0710: RNCC: 2 | RNVC: 2
38012-0710: RNCC: 3 | RNVC: 2
38012-0710: RNCC: 5 | RNVC: 9

13 May 1987

5340-12-010-8498

5340-12-199-9360
Angle Bracket

121999360
23111-4500.12: RNCC: 2 | RNVC: 2
23111-4500.12: RNCC: 3 | RNVC: 2
23111-4500-12: RNCC: 5 | RNVC: 9
23111-4500-12: RNCC: 5 | RNVC: 9
23111-4500.12: RNCC: 5 | RNVC: 9
23111-4500.12: RNCC: 5 | RNVC: 9

20 Jun 1984

5340-12-351-6316
Lock-Release Lever

123516316
11419102: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-12-317-6227
Nonmetallic Bumper

123176227
4312 712 47410: RNCC: 3 | RNVC: 2
4900 231 711 26800: RNCC: 5 | RNVC: 9

25 Apr 1989

5340-12-359-2996
Access Cover

123592996
000 911 07 30: RNCC: 3 | RNVC: 2

21 Jan 2003

5340-12-348-5986
Mounting Plate

123485986
1682-040000.001.0: RNCC: 2 | RNVC: 2
1682-040000.001.0: RNCC: 3 | RNVC: 2

23 Jul 1999

5340-12-304-5241
Detent Plunger

123045241
0224 7365: RNCC: 3 | RNVC: 2
02247365ED0148-29: RNCC: 5 | RNVC: 2
2247365ED0148-29: RNCC: 5 | RNVC: 2
K0.00224-7365: RNCC: 5 | RNVC: 2
K0002247365: RNCC: 5 | RNVC: 2

26 Jul 1985

5340-12-197-0180
Handwheel

121970180
DIN390-B80-GG: RNCC: 2 | RNVC: 2
B80DIN390-GG: RNCC: 5 | RNVC: 2

12 Sep 1983

5340-12-318-9955
Nonmetallic Bumper

123189955
2654-330114.01: RNCC: 2 | RNVC: 2
2654-330114.01: RNCC: 3 | RNVC: 2
2654-330 114.01: RNCC: 5 | RNVC: 9
679-00060000.01: RNCC: 5 | RNVC: 9
2654-330 114.01: RNCC: 5 | RNVC: 9
679-00060000.01: RNCC: 5 | RNVC: 9
2654-330 114.01: RNCC: 5 | RNVC: 9

30 Aug 1989

5340-12-186-3071
Retaining Strap

121863071
42016305: RNCC: 3 | RNVC: 2
42016305KY5049-04: RNCC: 5 | RNVC: 2
4463590ED5049-04: RNCC: 5 | RNVC: 2
42016304UY5049-04: RNCC: 5 | RNVC: 2
04463590: RNCC: 5 | RNVC: 2
42016304: RNCC: 5 | RNVC: 2

13 Dec 1980

5340-12-194-8877
Webbing Strap

121948877
2500125-131300.00: RNCC: 2 | RNVC: 2
2500125-131300.00: RNCC: 3 | RNVC: 2
2500125-131300-00: RNCC: 5 | RNVC: 2
2500125-131300-00: RNCC: 5 | RNVC: 9
2500125-131300.00: RNCC: 5 | RNVC: 9

15 Dec 1982

5340-12-172-7042
Mending Plate

121727042
1224-209.13: RNCC: 2 | RNVC: 2
532008-0182.000: RNCC: 3 | RNVC: 2
532008-182: RNCC: 5 | RNVC: 9
532008-0182.000: RNCC: 5 | RNVC: 9
1224-209.13: RNCC: 5 | RNVC: 9
532008-182: RNCC: 5 | RNVC: 9
1224-209-13: RNCC: 5 | RNVC: 9

13 Feb 1978

5340-12-335-3451
Mounting Bracket

123353451
6700018-201830.00: RNCC: 2 | RNVC: 2
6700018-201830.00: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-12-358-7878
Manual Control Lever

123587878
0008332025: RNCC: 3 | RNVC: 2
577760M: RNCC: 5 | RNVC: 9

14 Nov 2002

5340-12-345-2428
Helical Compression Spring Seat

123452428
07.0941: RNCC: 3 | RNVC: 2
CAE00507: RNCC: 5 | RNVC: 2

16 Feb 1998

5340-12-373-4121
Loop Clamp

123734121
000764: RNCC: 3 | RNVC: 2

30 Oct 2007

5340-12-371-2348
Nut And Bolt Head Protective Cap

123712348
71008948: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-12-384-6028
Ball Socket Seat

123846028
631803: RNCC: 3 | RNVC: 2

11 Mar 2011

5340-12-315-3057
Mounting Bracket

123153057
6204901640: RNCC: 3 | RNVC: 2
620 490 16 40: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-376-0916
Mounting Bracket

123760916
1534388: RNCC: 3 | RNVC: 2

12 Aug 2008

5340-12-314-4101
Access Cover

123144101
04516774: RNCC: 3 | RNVC: 2
04516774: RNCC: 5 | RNVC: 2

2 Jul 1988

5340-12-384-5984
Lifting Sling Sleeve

123845984
98F27508498.204: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-12-329-2373
Butt Hinge

123292373
3580: RNCC: 3 | RNVC: 2

25 Jul 1992

5340-12-368-2500
Butt Hinge

123682500
240-9201: RNCC: 3 | RNVC: 2

17 Jan 2006

5340-12-042-1176

5340-12-329-9614
Access Cover

123299614
2500229-196000.000.0: RNCC: 2 | RNVC: 2
2500229-196000.000.0: RNCC: 3 | RNVC: 2

16 Oct 1992

5340-12-325-7723
Nonmetallic Bumper

123257723
5801984-200100.005.0: RNCC: 2 | RNVC: 2
5801984-200100.005.0: RNCC: 3 | RNVC: 2
5801984-200100.005.0: RNCC: 5 | RNVC: 2

8 Jul 1991

5340-12-334-4160
Mounting Bracket

123344160
073-483512-000-0: RNCC: 2 | RNVC: 2
073-483512-000-0: RNCC: 3 | RNVC: 2

5 May 1994

5340-12-323-4694
Nonmetallic Bumper

123234694
1203 4570: RNCC: 3 | RNVC: 2
12034570ED0112-90: RNCC: 5 | RNVC: 2
3.0156.01.9.0014: RNCC: 5 | RNVC: 2

28 Nov 1990

5340-12-382-0409
Dust And Moisture Seal Protective Cap

123820409
2522 4441-100: RNCC: 3 | RNVC: 2

30 Apr 2010

5340-12-330-2199
Handle Grip

123302199
706-650010-000-0: RNCC: 2 | RNVC: 2
706-650010-000-0: RNCC: 3 | RNVC: 2

17 Nov 1992

5340-12-701-8048
Mounting Plate

127018048
VG95211-ML-127018048: RNCC: 2 | RNVC: 2
5.12.8606.0901.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-703-3445
Mounting Bracket

127033445
VG95211-ML-127033445: RNCC: 2 | RNVC: 2
S32-6100-1215/5A-0,5: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-199-8162
Mending Plate

121998162
0289 0708: RNCC: 3 | RNVC: 2
2890708: RNCC: 5 | RNVC: 2
2890708ED0693-79: RNCC: 5 | RNVC: 2

2 Jun 1984

5340-12-179-5445
Angle Bracket

121795445
4422682240: RNCC: 3 | RNVC: 2

6 Jul 1979

5340-12-171-3331
Nonmetallic Bumper

121713331
81974630001: RNCC: 3 | RNVC: 2

30 Sep 1977

5340-12-142-8782
Retaining Strap

121428782
8380780841: RNCC: 2 | RNVC: 2
8380780841: RNCC: 5 | RNVC: 2
600464: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-384-2960
Mechanical Stop

123842960
9233283002: RNCC: 3 | RNVC: 2
9233283002: RNCC: 5 | RNVC: 2
23952: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-12-388-9831
Mechanical Stop

123889831
F1.1611-26-19-10.00-14: RNCC: 3 | RNVC: 2

11 May 2012

5340-12-179-8396
Double Angle Bracket

121798396
5801212-1621.001: RNCC: 3 | RNVC: 2
5801212-1621-001: RNCC: 5 | RNVC: 2

3 Aug 1979

5340-12-157-8095
Resilient Mount

121578095
DIN95363-A9X12-M4X8-M4X10-NR55S: RNCC: 4 | RNVC: 1
500005-M4X8-M4X10.NR55.ST: RNCC: 5 | RNVC: 2
TL1T1079: RNCC: 5 | RNVC: 2
811.000.009.012.4X8.4X10.NR55.ST: RNCC: 5 | RNVC: 9
81100-9X12-M4X8-M4X10.NR55.ST: RNCC: 5 | RNVC: 9
VG95363-A9X12-M4X8-M4X10-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-2669
Electrical-Mechanical Equipment Post

121902669
31 051-001: RNCC: 3 | RNVC: 2
31051-001: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-313-9165
Kunst Gleitschiene

123139165
1955721: RNCC: 3 | RNVC: 2
TYPE HS2500-38: RNCC: 5 | RNVC: 9

20 May 1988

5340-12-370-6170
Mounting Plate

123706170
V6520-03012-101: RNCC: 2 | RNVC: 2
V6520-03012-101: RNCC: 3 | RNVC: 2

30 Nov 2006

5340-12-385-3554
Mending Plate

123853554
22709: RNCC: 1 | RNVC: 2
22709: RNCC: 3 | RNVC: 2

25 May 2011

5340-12-362-1400
Arched Cushion

123621400
11194000: RNCC: 3 | RNVC: 2
LFPC103: RNCC: 5 | RNVC: 2
LFPC103: RNCC: 5 | RNVC: 2
364-6542: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-12-094-4814

5340-12-308-7578
Strap Hinge

123087578
80001875: RNCC: 3 | RNVC: 2

13 Nov 1986

5340-12-372-6707
Friction Catch

123726707
104203: RNCC: 3 | RNVC: 2

9 Aug 2007

5340-12-338-7793
Angle Bracket

123387793
2300042-240000.002: RNCC: 2 | RNVC: 2
2300042-240000.002: RNCC: 3 | RNVC: 2
2300042-240000.002: RNCC: 5 | RNVC: 9

24 Aug 1995

5340-12-344-1588
Mounting Plate

123441588
4375440517: RNCC: 3 | RNVC: 2

19 Sep 1997

5340-12-370-3170
Mounting Bracket

123703170
1221 2386: RNCC: 3 | RNVC: 2

25 Oct 2006

5340-12-349-2697
Angle Bracket

123492697
T524M1501251: RNCC: 3 | RNVC: 2

19 Oct 1999

5340-12-175-9377
Pipe Bracket

121759377
5801357-4100.03F: RNCC: 2 | RNVC: 2
5801357-4100.03F: RNCC: 3 | RNVC: 2
5801357-4100-03F: RNCC: 5 | RNVC: 2
5801357-4100-03F: RNCC: 5 | RNVC: 2
5801357-4100-03F: RNCC: 5 | RNVC: 9
5801357-4100.03F: RNCC: 5 | RNVC: 9

30 Oct 1978

5340-12-174-7494
Retaining Strap

121747494
5801113-111-008: RNCC: 3 | RNVC: 2
5801113-111.008: RNCC: 5 | RNVC: 2

27 Jul 1978

5340-12-339-3779
Clamping Catch

123393779
1504L01-1X1AJ: RNCC: 3 | RNVC: 2
1504L01-2X1AJ: RNCC: 5 | RNVC: 2
0745231317: RNCC: 5 | RNVC: 2

16 Nov 1995

5340-12-702-5104
Rod End Connector

127025104
VG95211-ML-127025104: RNCC: 2 | RNVC: 2
5.51.6501.1161.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-186-1455
Electrical-Mechanical Equipment Post

121861455
512206-0350.000: RNCC: 3 | RNVC: 2
512206-0350: RNCC: 5 | RNVC: 2
512206-0350-000: RNCC: 5 | RNVC: 2

2 Dec 1980

5340-12-316-4322
Resilient Mount

123164322
DIN95366-A3-NR45ST: RNCC: 2 | RNVC: 2
786011WEICH: RNCC: 5 | RNVC: 2
100003-NR45.ST: RNCC: 5 | RNVC: 2
60016032-NR45.ST: RNCC: 5 | RNVC: 2
VG95366-A3-NR45ST: RNCC: 5 | RNVC: 9

17 Jan 1989

5340-12-337-4249
Angle Bracket

123374249
MT9.56-250000.002.0: RNCC: 3 | RNVC: 2

2 Mar 1995

5340-12-159-9902
Rigid Caster

121599902
SPEZIAL790292: RNCC: 3 | RNVC: 2
BK-RU-125RO: RNCC: 3 | RNVC: 9
176P-BK-RU-125RO: RNCC: 5 | RNVC: 2
AS439-10R0125: RNCC: 5 | RNVC: 9
T104-439-10R0-125: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-7841
Loop Clamp

123137841
LN9490BK16: RNCC: 2 | RNVC: 2

5 May 1988

5340-12-300-2131
Angle Bracket

123002131
3098950214: RNCC: 3 | RNVC: 2

14 Jul 1984

5340-12-358-0735
Access Cover

123580735
2300042-255152.000: RNCC: 2 | RNVC: 2
2300042-255152.000: RNCC: 3 | RNVC: 2

10 Sep 2002

5340-12-367-5251
Spring Tension Clip

123675251
281971812: RNCC: 3 | RNVC: 2

29 Aug 2005

5340-12-369-1755
Nonmetallic Bumper

123691755
05126402: RNCC: 3 | RNVC: 2

31 May 2006

5340-12-198-5645
Door Button

121985645
3127250079: RNCC: 3 | RNVC: 2

9 Feb 1984

5340-12-314-5086
Recess Handle

123145086
CF 822 708 AT: RNCC: 2 | RNVC: 2
CF 822 708 AT: RNCC: 3 | RNVC: 2
CF 822 708 AT: RNCC: 5 | RNVC: 2

14 Jul 1988

5340-12-363-3615
Mounting Bracket

123633615
0212 6885: RNCC: 3 | RNVC: 2

2 Jun 2004

5340-12-344-6902
Mounting Bracket

123446902
5592036740: RNCC: 3 | RNVC: 2

28 Nov 1997

5340-12-304-5412
Angle Bracket

123045412
4065520740: RNCC: 3 | RNVC: 2

29 Jul 1985

5340-12-312-3735
Mounting Plate

123123735
M511077: RNCC: 3 | RNVC: 9
M511077: RNCC: 5 | RNVC: 2

22 Dec 1987

5340-12-341-6109
Pad Eye

123416109
380159: RNCC: 3 | RNVC: 2
HSML 380159: RNCC: 5 | RNVC: 2

2 Oct 1996

5340-12-389-1664
Lock-Release Lever

123891664
CV-15: RNCC: 3 | RNVC: 2
CV-15: RNCC: 5 | RNVC: 2

31 May 2012

5340-12-181-7852
Angle Bracket

121817852
5800826-167: RNCC: 2 | RNVC: 2
5800826-167: RNCC: 3 | RNVC: 2

17 Dec 1979

5340-12-368-1319
Fuehrungs- Schiene

123681319
5161-334000A03B: RNCC: 2 | RNVC: 2
5161-334000A03B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-358-2540
Mounting Plate

123582540
J0433105D127-001A0-033: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-12-190-7176
Double Angle Bracket

121907176
NO PRIMARY REF 12-190-7176: RNCC: 3 | RNVC: 2
5513 137167: RNCC: 5 | RNVC: 9
5513137167: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-358-6146
Access Cover

123586146
481-200464: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-12-304-4364
Angle Bracket

123044364
537161-3462.000: RNCC: 3 | RNVC: 2
537161-3462.000: RNCC: 5 | RNVC: 9

17 Jul 1985

5340-12-177-7194
Dust And Moisture Seal Protective Cap

121777194
5L.4692.023.46: RNCC: 3 | RNVC: 2
10-4082: RNCC: 5 | RNVC: 2
5L4692-023-46: RNCC: 5 | RNVC: 9

14 Feb 1979

5340-12-391-3349
Angle Bracket

123913349
9999015-180580.010.0: RNCC: 2 | RNVC: 2
9999015-180580.010.0: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-12-386-2446
Mechanical Stop

123862446
4038R-100031.000.0: RNCC: 2 | RNVC: 2
4038R-100031.000.0: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-12-338-7549
Metallic Solid Wheel

123387549
23305-185041.01.0: RNCC: 2 | RNVC: 2
23305-185041.01.0: RNCC: 3 | RNVC: 2
23305-185041.01.0: RNCC: 5 | RNVC: 9

22 Aug 1995

5340-12-359-7203
Elastic Strap

123597203
2500261-187660.000.0: RNCC: 2 | RNVC: 2
2500261-187660.000.0: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-300-9401
Retaining Strap

123009401
599007-001: RNCC: 3 | RNVC: 2
1521-354.06(5): RNCC: 5 | RNVC: 9

13 Sep 1984

5340-12-378-1813
Retaining Strap

123781813
0039889378: RNCC: 3 | RNVC: 2

18 Mar 2009

5340-12-197-5149
Anschlag Scharnier

5340-12-197-3937
Starr Laufrolle

5340-12-348-4514
Manual Control Handle

123484514
7672 802 102: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-12-351-5410
Mounting Bracket

123515410
7802769200: RNCC: 2 | RNVC: 2
7802769200: RNCC: 5 | RNVC: 2
78027 69200: RNCC: 5 | RNVC: 9

2 Aug 2000

5340-12-349-6595
Dust And Moisture Seal Protective Plug

123496595
2120.1259: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-12-169-7544
Spring Tension Clip

121697544
A11A336250005: RNCC: 3 | RNVC: 2

6 Jun 1977

5340-12-349-5338
Nonmetallic Bumper

123495338
T0002: RNCC: 2 | RNVC: 2
T0002: RNCC: 3 | RNVC: 2

29 Nov 1999

5340-12-372-5697
Spring Tension Clip

123725697
EMB3785: RNCC: 3 | RNVC: 2
0006950009: RNCC: 5 | RNVC: 2

30 Jul 2007

5340-12-353-8848
Cremone Bolt

123538848
209430: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-194-1235
Angle Bracket

121941235
A501063: RNCC: 3 | RNVC: 2

5 Oct 1982

5340-12-192-6552
Flare Lock Fastener

121926552
7820211404: RNCC: 3 | RNVC: 2
78202 11404: RNCC: 5 | RNVC: 9

12 May 1982

5340-12-310-2063
Access Cover

123102063
S35558-01-6-157: RNCC: 3 | RNVC: 2

21 Apr 1987

5340-12-317-9583
Electrical-Mechanical Equipment Post

123179583
VG95148C5,5XM3X15-2.0402.30-E2A: RNCC: 2 | RNVC: 2
B 2.0402 M3X15: RNCC: 3 | RNVC: 2
2018616: RNCC: 5 | RNVC: 2

30 May 1989

5340-12-135-6825
Snap Hook

121356825
DIN5299-A60BK: RNCC: 2 | RNVC: 2
DIN5299-A60-ROH: RNCC: 3 | RNVC: 2
YDX-5001 1/2-60 BLANK: RNCC: 3 | RNVC: 9
A60DIN5299BL: RNCC: 5 | RNVC: 2
A60DIN5299BLANK: RNCC: 5 | RNVC: 2
4367: RNCC: 5 | RNVC: 2
5001 1/2-60 BLANK: RNCC: 5 | RNVC: 9
5001-1-2-60: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-166-1543
Nonmetallic Bumper

121661543
VG95211-ML-121661543: RNCC: 2 | RNVC: 2
59006301: RNCC: 3 | RNVC: 2
TO90/108KERN-A-QUALRTEIIKOMPLETT: RNCC: 3 | RNVC: 2
90-108KERNAQUALRTE2K0MPLETT: RNCC: 5 | RNVC: 2
90-108KERNAQUALRTE2K0MPLETT: RNCC: 5 | RNVC: 2
103-210-031: RNCC: 5 | RNVC: 2

10 Aug 1976

5340-12-338-1080
Retaining Strap

123381080
160-75847: RNCC: 3 | RNVC: 2
15160-75847: RNCC: 5 | RNVC: 2
160-75847: RNCC: 5 | RNVC: 9

23 May 1995

5340-12-188-6098
Angle Bracket

121886098
5801758-3110.00: RNCC: 2 | RNVC: 2
5801758-3110.00: RNCC: 3 | RNVC: 2
5801758-3110-00: RNCC: 5 | RNVC: 2
5801758-3110-00: RNCC: 5 | RNVC: 9
5801758-3110.00: RNCC: 5 | RNVC: 9

21 Jul 1981

5340-12-336-7114
Butt Hinge

123367114
999701-121300.02: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-12-375-9592
Manual Control Handle

123759592
110.01.010.028-00: RNCC: 3 | RNVC: 2

24 Jul 2008

5340-12-701-8488
Loop Clamp

127018488
5191A-22: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-377-8065
Mounting Plate

123778065
ZG 1013-1040200: RNCC: 3 | RNVC: 2

12 Feb 2009

5340-12-169-7993
Resilient Mount

121697993
0118098/11MN60: RNCC: 3 | RNVC: 2
WW 410 495: RNCC: 5 | RNVC: 2
WW410495: RNCC: 5 | RNVC: 2
WW410495: RNCC: 5 | RNVC: 2
WW410495: RNCC: 5 | RNVC: 2
0118098.60: RNCC: 5 | RNVC: 2
012006: RNCC: 5 | RNVC: 2
011809815: RNCC: 5 | RNVC: 9

10 Jun 1977

5340-12-180-2150
Angle Bracket

121802150
03440058: RNCC: 3 | RNVC: 2
3440058EE5505-29: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-304-9791
Clamping Catch

123049791
5801557-1011.00: RNCC: 2 | RNVC: 2
5801557-1011.00: RNCC: 3 | RNVC: 2
5801557-1011.00: RNCC: 5 | RNVC: 9

12 Sep 1985

5340-12-307-4340
Door Button

123074340
11171957200: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-12-376-0544
Handwheel

123760544
E0000701: RNCC: 3 | RNVC: 2

7 Aug 2008

5340-12-307-1982
Mending Plate

123071982
RP969317: RNCC: 3 | RNVC: 2

21 May 1986

5340-12-313-2530
Sliding Stay

123132530
200338: RNCC: 3 | RNVC: 2
23K26 0008 00.001: RNCC: 5 | RNVC: 2

16 Mar 1988

5340-12-320-6600
Elastic Strap

123206600
61211243562: RNCC: 3 | RNVC: 2
1243562: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-180-3895
Angle Bracket

121803895
81155010254: RNCC: 3 | RNVC: 2

7 Sep 1979

5340-12-381-4441
Dust And Moisture Seal Protective Plug

123814441
1140817: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-12-312-2499
Angle Bracket

123122499
100000634: RNCC: 2 | RNVC: 2
100000634: RNCC: 3 | RNVC: 2

9 Dec 1987

5340-12-131-3396
Turnbuckle Body

121313396
DIN1479-SPM12-ST: RNCC: 2 | RNVC: 2
SP-DIN1479-M12-ROH: RNCC: 3 | RNVC: 2
SPM12DIN1479: RNCC: 5 | RNVC: 2
5500012S: RNCC: 5 | RNVC: 2
M12DIN1479: RNCC: 5 | RNVC: 2
01115362: RNCC: 5 | RNVC: 9
1115362: RNCC: 5 | RNVC: 9
1115362EY8821-31: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-8321
Metal Runner

123028321
4900123-1900.01: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-344-8723
Mounting Plate

123448723
30-79350-0251: RNCC: 3 | RNVC: 2
P006014033/11403: RNCC: 5 | RNVC: 2

5 Jan 1998

5340-12-701-4520
Loop Clamp

127014520
VG95211-ML-127014520: RNCC: 2 | RNVC: 2
5.12.5314.1000.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-308-8699
Extension Drawer Slide

123088699
4900059-710348.000.0: RNCC: 2 | RNVC: 2
KM.S01-111200.000: RNCC: 3 | RNVC: 2
4900059-710348.000.0: RNCC: 5 | RNVC: 2
4900059-710348.000.0: RNCC: 5 | RNVC: 9

25 Nov 1986

5340-12-366-3953
Loop Clamp

123663953
DIN3016-1-D1-66X25-W1-2-CR: RNCC: 2 | RNVC: 2

20 Apr 2005

5340-12-319-9639
Angle Bracket

123199639
852-181150.00.0: RNCC: 2 | RNVC: 2
852-181150.00.0: RNCC: 3 | RNVC: 2
852-181150.00.0: RNCC: 5 | RNVC: 9

23 Nov 1989

5340-12-339-9720
Handwheel

123399720
SA 14.1-30.0: RNCC: 3 | RNVC: 2

8 Feb 1996

5340-12-309-7921
Access Cover

123097921
6131607: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-323-5764
Flush Lock

123235764
602E609: RNCC: 3 | RNVC: 2
6020403 UND 602B992: RNCC: 5 | RNVC: 2

7 Dec 1990

5340-12-342-5261
Mounting Plate

123425261
4068 312 511: RNCC: 3 | RNVC: 2
4068312511: RNCC: 5 | RNVC: 2

24 Feb 1997

5340-12-374-6214
Handle Ferrule

123746214
L671M5002206: RNCC: 3 | RNVC: 2

29 Feb 2008

5340-12-374-3833
Mechanical Stop

123743833
L521M3041214: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-12-368-1407
Loop Clamp

123681407
T290M2001212: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-12-383-5003
Mounting Bracket

123835003
SK35: RNCC: 3 | RNVC: 2
TBEC0035: RNCC: 5 | RNVC: 2

28 Oct 2010

5340-12-190-9399
Nonmetallic Bumper

121909399
4169870065: RNCC: 3 | RNVC: 2

23 Dec 1981

5340-12-329-7609
Runner

123297609
2300248-81000.07: RNCC: 2 | RNVC: 2
2300248-81000.07: RNCC: 3 | RNVC: 2
2300248-81000.07: RNCC: 5 | RNVC: 2

24 Sep 1992

5340-12-324-0124
Webbing Strap

123240124
1950-2200: RNCC: 2 | RNVC: 2
80.6.04.99-005: RNCC: 3 | RNVC: 2
1950-2200: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-12-701-1466
Mounting Bracket

127011466
VG95211-ML-127011466: RNCC: 2 | RNVC: 2
5.12.0200.0503.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-362-1549
Retaining Clamp Assembly

123621549
330196-0051.010: RNCC: 3 | RNVC: 2
3301960051010: RNCC: 5 | RNVC: 9

16 Jan 2004

5340-12-343-0970
Rod End Connector

123430970
5092-145: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-173-7492
Clamping Catch

121737492
4178473: RNCC: 3 | RNVC: 2
1246-071: RNCC: 5 | RNVC: 2
S12BG01-09-00-000: RNCC: 5 | RNVC: 2

8 May 1978

5340-12-386-5311
Angle Bracket

123865311
1.314-201000.05: RNCC: 2 | RNVC: 2
1.314-201000.05: RNCC: 5 | RNVC: 2

8 Sep 2011

5340-12-356-0285
Recess Handle

123560285
158.75.009: RNCC: 3 | RNVC: 2
158.75.0 BRAUN: RNCC: 5 | RNVC: 2

15 Jan 2002

5340-12-136-2143
Nonmetallic Bumper

121362143
VG95092A10X2,5X20X10-PUR60: RNCC: 2 | RNVC: 2
VG95092A10X2,5X20X10-PUR60: RNCC: 3 | RNVC: 2
70.01361-6037: RNCC: 5 | RNVC: 2
70013616037: RNCC: 5 | RNVC: 2
81960200001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-3310
Mounting Bracket

127013310
VG95211-ML-127013310: RNCC: 2 | RNVC: 2
5.12.5104.0210.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-366-1784
Nonmetallic Bumper

123661784
5183-04-12-00/35: RNCC: 3 | RNVC: 2
310446: RNCC: 5 | RNVC: 2

17 Mar 2005

5340-12-159-3188
Retaining Strap

121593188
R2: RNCC: 3 | RNVC: 2
5L3821.001-40: RNCC: 5 | RNVC: 2
5LV3821.001-40: RNCC: 5 | RNVC: 2
201-20020: RNCC: 5 | RNVC: 2
532002130: RNCC: 5 | RNVC: 9
5L3821-001-40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-357-2638
Loop Clamp

123572638
161 6527 092: RNCC: 3 | RNVC: 2
SPGU6527-92/25SK: RNCC: 5 | RNVC: 2

28 May 2002

5340-12-377-6736
Webbing Strap

123776736
4100036-150390.000: RNCC: 2 | RNVC: 2
4100036-150390.000: RNCC: 3 | RNVC: 2

2 Feb 2009

5340-12-340-1545
Mounting Bracket

123401545
1212 6178: RNCC: 3 | RNVC: 2
30.64-012/1.3: RNCC: 5 | RNVC: 2

7 Mar 1996

5340-12-195-7303
Lock-Release Lever

121957303
2500067-102250.00: RNCC: 2 | RNVC: 2
2500067-102250.00: RNCC: 3 | RNVC: 2
2500067-102250.00: RNCC: 3 | RNVC: 2
2500067-102250-00: RNCC: 5 | RNVC: 2
2500067-102250.00: RNCC: 5 | RNVC: 9

6 Apr 1983

5340-12-301-4322
Mending Plate

123014322
P-856027-003: RNCC: 3 | RNVC: 2
P856027-003: RNCC: 5 | RNVC: 2

13 Oct 1984

5340-12-166-0484
Handle Grip

121660484
100429-16000.09.0: RNCC: 2 | RNVC: 2
100429-16000.09.0: RNCC: 3 | RNVC: 2
100429-16000-09-0: RNCC: 5 | RNVC: 2
100429-16000-09-0: RNCC: 5 | RNVC: 9

29 Jul 1976

5340-12-191-4472
Angle Bracket

121914472
4604921941: RNCC: 3 | RNVC: 2
1754-56: RNCC: 5 | RNVC: 2
721 1 12 085 1: RNCC: 5 | RNVC: 9

3 Feb 1982

5340-12-152-4580
Retaining Strap

121524580
115-02685-3: RNCC: 3 | RNVC: 9
1092105-0300-019: RNCC: 5 | RNVC: 9
3-7822-812: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-9432
Metal Runner

123219432
702-241500-951-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-358-0112
Loop Clamp

123580112
DIN3016-1-E1-6X15-W5-NBR: RNCC: 2 | RNVC: 2
VG95931-E6X15-W5: RNCC: 5 | RNVC: 9
DIN3016-1-E1-6X15-W5: RNCC: 5 | RNVC: 9

2 Sep 2002

5340-12-022-1497

5340-12-380-0316
Dust And Moisture Seal Protective Cap-Plug

123800316
80000669: RNCC: 3 | RNVC: 2

21 Sep 2009

5340-12-386-9416
Mounting Bracket

123869416
X00027677: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-12-361-0508
Mounting Bracket

123610508
S282M4014101: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-12-327-4230
Resilient Mount

123274230
50504201: RNCC: 3 | RNVC: 2
061 187 14: RNCC: 3 | RNVC: 2
D06118714C: RNCC: 5 | RNVC: 2
D06118714: RNCC: 5 | RNVC: 2

21 Jan 1992

5340-12-327-6731
Retaining Strap

123276731
A11A742420122: RNCC: 3 | RNVC: 2

17 Feb 1992

5340-12-336-1721
Lock-Release Lever

123361721
53 690 1006: RNCC: 3 | RNVC: 2
536901006: RNCC: 5 | RNVC: 2

3 Nov 1994

5340-12-346-2227
Clamping Catch

123462227
6081A: RNCC: 3 | RNVC: 2

30 Jun 1998

5340-12-331-5588
Webbing Strap

123315588
1475-9712.10: RNCC: 3 | RNVC: 2
1475-9712.10: RNCC: 5 | RNVC: 2

19 May 1993

5340-12-040-6195

5340-12-377-7939
Genera Guide Rail

123777939
64293232: RNCC: 3 | RNVC: 2

11 Feb 2009

5340-12-321-9978
Mending Plate

123219978
DKAU022: RNCC: 3 | RNVC: 2

16 Jul 1990

5340-12-042-4168

5340-12-339-8296
Dust And Moisture Seal Protective Plug

123398296
B80099976: RNCC: 3 | RNVC: 2
B812230099976: RNCC: 5 | RNVC: 2

23 Jan 1996

5340-12-355-9953
Mounting Bracket

123559953
5400051-148320.00: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-12-364-4810
Snap Hook

123644810
2500304-10200.02: RNCC: 2 | RNVC: 2
185086: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-389-2286
Access Cover

123892286
601243-203600.00: RNCC: 2 | RNVC: 2
601243-203600.00: RNCC: 3 | RNVC: 2

11 Jun 2012

5340-12-314-6526
Access Cover

123146526
512214-0222.000: RNCC: 3 | RNVC: 2
512214-0222: RNCC: 5 | RNVC: 2

27 Jul 1988

5340-12-163-8279
Angle Bracket

121638279
5835-17.006: RNCC: 3 | RNVC: 2
H38-3504-50: RNCC: 5 | RNVC: 2
5835-17-006: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-9150
Electrical-Mechanical Equipment Post

123199150
335907-0359.000: RNCC: 2 | RNVC: 2
335907-0359.000: RNCC: 3 | RNVC: 2
335907-0359.000: RNCC: 5 | RNVC: 9

16 Nov 1989

5340-12-376-0727
Caster Wheel

123760727
130PA/050/015/10: RNCC: 3 | RNVC: 2

11 Aug 2008

5340-12-332-3673
Nonmetallic Bumper

123323673
160-62156-64: RNCC: 3 | RNVC: 2
160-62156.64: RNCC: 5 | RNVC: 2
160-62156-64: RNCC: 5 | RNVC: 2
160-62156.64: RNCC: 5 | RNVC: 9

4 Aug 1993

5340-12-344-3385
Mounting Bracket

123443385
81156400012: RNCC: 3 | RNVC: 2
81.15640-0012: RNCC: 5 | RNVC: 2
KS6927: RNCC: 5 | RNVC: 2

17 Oct 1997

5340-12-300-2702
Mending Plate

123002702
A11A121208211: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-300-2396
Rod End Clevis

123002396
1809027203: RNCC: 3 | RNVC: 2
0002522514: RNCC: 5 | RNVC: 2

18 Jul 1984

5340-12-360-1753
Latch Bar

123601753
9417230069: RNCC: 3 | RNVC: 2

14 Apr 2003

5340-12-341-7659
Webbing Strap

123417659
5000.2539: RNCC: 3 | RNVC: 2

24 Oct 1996

5340-12-359-0454
Dust And Moisture Seal Protective Plug

123590454
0014312787: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-343-8874
Access Cover

123438874
50.40.100: RNCC: 3 | RNVC: 2

11 Aug 1997

5340-12-383-4046
Angle Bracket

123834046
X00031730: RNCC: 3 | RNVC: 2

18 Oct 2010

5340-12-379-9379
Mounting Bracket

123799379
1558015: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-12-348-0390
Handle Grip

123480390
1000118-125: RNCC: 2 | RNVC: 2
1000118-125: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-12-184-9430
Retaining Clip

121849430
CF 429 238 AR: RNCC: 3 | RNVC: 2
CF 429 238 AR: RNCC: 5 | RNVC: 2
CF429238: RNCC: 5 | RNVC: 2
CF429238: RNCC: 5 | RNVC: 2
CF 429 238: RNCC: 5 | RNVC: 2
CF 429 238: RNCC: 5 | RNVC: 2

28 Aug 1980

5340-12-319-7449
Clamping Catch

123197449
5802295-106000: RNCC: 2 | RNVC: 2
7800591120: RNCC: 3 | RNVC: 2
452-306000-000-0: RNCC: 5 | RNVC: 2
78005 91120: RNCC: 5 | RNVC: 9

31 Oct 1989

5340-12-158-7473
Plain Solid Disk

121587473
8371840476: RNCC: 3 | RNVC: 2
4798-667: RNCC: 5 | RNVC: 2
4798667: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-368-4743
Angle Bracket

123684743
J92228338-003: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-12-188-2633
Nonmetallic Bumper

121882633
4312 712 24350: RNCC: 3 | RNVC: 2
431271224350: RNCC: 5 | RNVC: 2
5801685-110000-14: RNCC: 5 | RNVC: 9
5801685-110000.14: RNCC: 5 | RNVC: 9

23 Jun 1981

5340-12-324-9980
Webbing Strap

123249980
79017/026-1000-0400: RNCC: 3 | RNVC: 2
79017/026-1000-400: RNCC: 3 | RNVC: 2
79017/026-1000-0400: RNCC: 5 | RNVC: 9

22 Apr 1991

5340-12-135-6694
Buckle

121356694
DIN5291-30-ST-VERNICKELT: RNCC: 2 | RNVC: 2
30DIN5291STVERNICKELT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-367-6132
Spring Loaded Cylinder Fastener

123676132
2300399-977035.000.0: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-12-302-5520
Double Angle Bracket

123025520
YK03150752: RNCC: 3 | RNVC: 2
03150752: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 15 0752: RNCC: 5 | RNVC: 9

11 Jan 1985

5340-12-129-8484

5340-12-334-7622
Ball Socket Seat

123347622
52.3060.007.00: RNCC: 3 | RNVC: 2

17 Jun 1994

5340-12-380-0014
Manual Control Lever

123800014
120D153621.000.0: RNCC: 2 | RNVC: 2
120D153621.000.0: RNCC: 3 | RNVC: 2

17 Sep 2009

5340-12-301-7908
Spring Tension Clip

123017908
0049882278: RNCC: 3 | RNVC: 2
S721 1 88 007 1: RNCC: 3 | RNVC: 9
S7211880071: RNCC: 5 | RNVC: 9

9 Nov 1984

5340-12-382-5246
Swivel Caster

123825246
0.0.418.10: RNCC: 3 | RNVC: 2

1 Jul 2010

5340-12-190-3220
Loop Clamp

121903220
Q531729045: RNCC: 3 | RNVC: 2
Q531729045: RNCC: 5 | RNVC: 2
Q 5 3172 9045: RNCC: 5 | RNVC: 2
Q 5 3172 9045: RNCC: 5 | RNVC: 2

19 Nov 1981

5340-12-701-4113
Mounting Bracket

127014113
VG95211-ML-127014113: RNCC: 2 | RNVC: 2
5.12.5311.8380.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-8979
Rod End Connector

127008979
VG95211-ML-127008979: RNCC: 2 | RNVC: 2
2.11.5101.8860.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-322-2754
Loop Clamp

123222754
DIN3015-LA-K-2R-12,7-PP-W1: RNCC: 2 | RNVC: 2
SP2127-PP-DP-AS: RNCC: 3 | RNVC: 2
HRL2A12,7PP STMBL: RNCC: 3 | RNVC: 2
RAPR3-2 1/2: RNCC: 3 | RNVC: 2
RAPR3-2 1/2: RNCC: 5 | RNVC: 2
DIN3015-LAK2R-12,7-PP-W1: RNCC: 5 | RNVC: 2

7 Aug 1990

5340-12-358-4944
Loop Clamp

123584944
DIN3016-1-D1-54X25-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-54X25-W1-2: RNCC: 5 | RNVC: 9

22 Oct 2002

5340-12-166-8433
Swivel Caster

121668433
148BLK-STARU-BS180RO: RNCC: 3 | RNVC: 2
101ALKSTARUS180MM: RNCC: 5 | RNVC: 2
225-69-7Z0LL: RNCC: 5 | RNVC: 2

23 Oct 1976

5340-12-349-4796
Angle Bracket

123494796
U60.281000.22-00: RNCC: 3 | RNVC: 2

19 Nov 1999

5340-12-377-3177
Bumper

123773177
312115: RNCC: 3 | RNVC: 2
5387-04-00-02/37: RNCC: 5 | RNVC: 2

8 Jan 2009

5340-12-359-7121
Access Cover

123597121
9736920158: RNCC: 3 | RNVC: 2

4 Mar 2003

5340-12-345-9022
Plug Button

123459022
E27096: RNCC: 3 | RNVC: 2

14 May 1998

5340-12-027-0727

5340-12-196-1201
Spring Tension Clip

121961201
311853309B: RNCC: 3 | RNVC: 2

1 Jun 1983

5340-12-368-8174
Angle Bracket

123688174
1030010-302000.003.0: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-12-369-2482
Mounting Bracket

123692482
5.042-793.0: RNCC: 3 | RNVC: 2

9 Jun 2006

5340-12-188-4375
Dust And Moisture Seal Protective Cap

121884375
90.412.01.087: RNCC: 3 | RNVC: 2
81619420023: RNCC: 5 | RNVC: 2
90-412-01-087: RNCC: 5 | RNVC: 2
90.412.01.08.7: RNCC: 5 | RNVC: 2

9 Jul 1981

5340-12-307-4372
Compression Cup

123074372
5801611-711000.02: RNCC: 2 | RNVC: 2
5801611-711000.02: RNCC: 3 | RNVC: 2
064-711000.02: RNCC: 5 | RNVC: 2

19 Jun 1986

5340-12-339-9464
Rigid Caster

123399464
480-7346-04-00-00-9: RNCC: 3 | RNVC: 2
480/7346-04-00-00/9: RNCC: 5 | RNVC: 2

6 Feb 1996

5340-12-368-9259
Bridge Clamp

123689259
0037167: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-169-1844
Dust And Moisture Seal Protective Cap

121691844
1387201000000: RNCC: 3 | RNVC: 2

20 Apr 1977

5340-12-359-8530
Dust And Moisture Seal Protective Cap-Plug

123598530
08001140: RNCC: 3 | RNVC: 2
101.000.009.040.31: RNCC: 3 | RNVC: 2
100.000.009.040.34: RNCC: 5 | RNVC: 9

14 Mar 2003

5340-12-178-3034
Nonmetallic Bumper

121783034
3853300075: RNCC: 3 | RNVC: 2

12 Apr 1979

5340-12-158-6932

5340-12-198-8991
Strap Hinge

121988991
2608440: RNCC: 3 | RNVC: 2

13 Mar 1984

5340-12-379-8858
Retaining Strap

123798858
390042: RNCC: 3 | RNVC: 2

9 Sep 2009

5340-12-379-3993
Runner

123793993
0102822: RNCC: 3 | RNVC: 2
0102822: RNCC: 5 | RNVC: 2

20 Jul 2009

5340-12-383-3786
Dust And Moisture Seal Protective Cap

123833786
29519A: RNCC: 3 | RNVC: 2
7421179039: RNCC: 5 | RNVC: 2
21179039: RNCC: 5 | RNVC: 2

13 Oct 2010

5340-12-381-6805
Loop Clamp

123816805
RLGU 1.26/12: RNCC: 3 | RNVC: 2

17 Mar 2010

5340-12-171-1348
Plain Solid Disk

121711348
A10-86-901-23-0: RNCC: 3 | RNVC: 2
85-637-0795: RNCC: 6 | RNVC: 9

9 Sep 1977

5340-12-186-7455
Strap Fastener Loop

121867455
5802206-144200: RNCC: 2 | RNVC: 2
535.5055: RNCC: 3 | RNVC: 2
5355055: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-384-5839
Loop Clamp

123845839
BRSGU82/25N16016: RNCC: 3 | RNVC: 2
000000002010: RNCC: 5 | RNVC: 2

10 Mar 2011

5340-12-301-7497
Nonmetallic Bumper

123017497
VIB15093-3B: RNCC: 3 | RNVC: 2
VIB15093-3A: RNCC: 5 | RNVC: 2
VIB15093-3A: RNCC: 5 | RNVC: 2
VIB15093-3B: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-12-328-0094
Filler Opening Cap

123280094
4845413: RNCC: 3 | RNVC: 2

27 Mar 1992

5340-12-325-6636
Protection Bellows

123256636
251711167F: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-12-317-2501
Bow Handle

123172501
GE9100T277: RNCC: 3 | RNVC: 2
GE9100T277: RNCC: 5 | RNVC: 9

21 Mar 1989

5340-12-022-3237

5340-12-322-3121
Hand Crank

123223121
1483.3.10.00: RNCC: 3 | RNVC: 2

10 Aug 1990

5340-12-358-7087
Dust And Moisture Seal Protective Cover

123587087
2800-392800.005.0: RNCC: 2 | RNVC: 2
2800-392800.005.0: RNCC: 3 | RNVC: 2

7 Nov 2002

5340-12-190-8768
Helical Compression Spring Seat

121908768
2410320072: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-331-0730
Nonmetallic Bumper

123310730
4087947: RNCC: 3 | RNVC: 2

18 Mar 1993

5340-12-318-5833
Dust And Moisture Seal Protective Plug

123185833
31002288: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-12-319-0881
Mounting Bracket

123190881
2654-332000.03: RNCC: 2 | RNVC: 2
2654-332000.03: RNCC: 3 | RNVC: 2
679-02000000.03: RNCC: 5 | RNVC: 9
2654-332 000.03: RNCC: 5 | RNVC: 9
679-02000000.03: RNCC: 5 | RNVC: 9

6 Sep 1989

5340-12-376-0257
Bumper

123760257
9GD413658-00: RNCC: 3 | RNVC: 2

4 Aug 2008

5340-12-384-9192
Mounting Bracket

123849192
F1.1289-37-08-00.20-00: RNCC: 3 | RNVC: 2

11 Apr 2011

5340-12-301-7665
Metal Runner

123017665
537177-0216.000: RNCC: 3 | RNVC: 2
53 71 77-0216: RNCC: 5 | RNVC: 9
537177-0216.000: RNCC: 5 | RNVC: 9
53 71 77-0216: RNCC: 5 | RNVC: 9
537177-0216: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-12-190-7417
Sealing Plug Assembly

121907417
E4-2013310: RNCC: 3 | RNVC: 2
E4-2013310: RNCC: 5 | RNVC: 9
E4-2013310: RNCC: 5 | RNVC: 9

10 Dec 1981

5340-12-194-5036
Door Button

121945036
5800686-1118: RNCC: 3 | RNVC: 2

10 Nov 1982

5340-12-367-8457
Angle Bracket

123678457
454-250500.001: RNCC: 3 | RNVC: 2
9892566: RNCC: 5 | RNVC: 2

24 Oct 2005

5340-12-387-5932
Mounting Plate

123875932
V6520-03063-041: RNCC: 3 | RNVC: 2

12 Jan 2012

5340-12-319-2070
Compression Cup

123192070
035 460 001 012: RNCC: 3 | RNVC: 2
0003301185: RNCC: 5 | RNVC: 2

13 Sep 1989

5340-12-352-5708
Sliding Door Hanger

123525708
K310: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-188-3021
Bow Handle

121883021
VG95149A68X18ST-CR: RNCC: 2 | RNVC: 2
C3782211-G: RNCC: 3 | RNVC: 2
C3782211-G: RNCC: 3 | RNVC: 2
C 3782 211 -G: RNCC: 5 | RNVC: 2
C 3782 211 -G: RNCC: 5 | RNVC: 2

29 Jun 1981

5340-12-172-2272
Quick Release Plunger

121722272
774-002-60: RNCC: 3 | RNVC: 2

3 Jan 1978

5340-12-198-1557
Catch Strike

121981557
23302-266600.00: RNCC: 2 | RNVC: 2
2863207: RNCC: 3 | RNVC: 2
23302-266600: RNCC: 5 | RNVC: 9

27 Dec 1983

5340-12-702-0224
Loop Clamp

127020224
VG95211-ML-127020224: RNCC: 2 | RNVC: 2
200N402-220: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-360-1412
Dust And Moisture Seal Protective Cap

123601412
280ER13: RNCC: 3 | RNVC: 2
GPN280ER13: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-12-134-7262

5340-12-159-4451
Butt Hinge

121594451
6010061: RNCC: 3 | RNVC: 2
50362: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-333-0045
Nonmetallic Solid Wheel

123330045
4273010011: RNCC: 3 | RNVC: 2
427 301 00 11: RNCC: 5 | RNVC: 2
A4273010011: RNCC: 5 | RNVC: 2

20 Oct 1993

5340-12-139-7062
Band- Scharnier

5340-12-358-1921
Manual Control Lever

123581921
14.20.18: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-12-092-2980

5340-12-325-1800
Mending Plate

123251800
54.0024.765.02: RNCC: 2 | RNVC: 2
54.0024.765.02: RNCC: 3 | RNVC: 2

14 May 1991

5340-12-041-0751

5340-12-376-3209
Swivel Caster

123763209
BK204517: RNCC: 3 | RNVC: 2

12 Sep 2008

5340-12-092-0915

5340-12-337-6980
Clamping Catch

123376980
8400180500: RNCC: 3 | RNVC: 2
84001 80500: RNCC: 5 | RNVC: 9

29 Mar 1995

5340-12-152-4837
Retaining Strap

121524837
115-02696-4: RNCC: 3 | RNVC: 9
1092105-3701-004: RNCC: 5 | RNVC: 9
1092105-3701-004: RNCC: 5 | RNVC: 9
4-7822-865: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-6841
Resilient Mount

123156841
NS5.67: RNCC: 3 | RNVC: 9
244 4695: RNCC: 5 | RNVC: 2
244 4695 E 5096-57: RNCC: 5 | RNVC: 2
2444695E5096-57: RNCC: 5 | RNVC: 2

19 Nov 1988

5340-12-156-2907
Retaining Strap

121562907
25704-196900.02.0: RNCC: 2 | RNVC: 2
25704-196900.02.0: RNCC: 3 | RNVC: 2
25704-196900-02-0: RNCC: 5 | RNVC: 2
25704-196900-02-0: RNCC: 5 | RNVC: 9
25704-196900.02.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-6804
Nonmetallic Bumper

123156804
81962100410: RNCC: 3 | RNVC: 2
DL22/034-1: RNCC: 5 | RNVC: 2
845-DL22/034-1: RNCC: 5 | RNVC: 2
81.96210.0410: RNCC: 5 | RNVC: 2
HQ8.73/M-BS80: RNCC: 5 | RNVC: 9

19 Nov 1988

5340-12-363-1219
Mounting Bracket

123631219
160-2303: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-388-5245
Mounting Bracket

123885245
5800182240: RNCC: 3 | RNVC: 2

28 Mar 2012

5340-12-336-3200
Vent Plug

123363200
R20542: RNCC: 3 | RNVC: 2
R20542: RNCC: 5 | RNVC: 9

10 Nov 1994

5340-12-382-1320
Magnetic Catch

123821320
2476-51100: RNCC: 3 | RNVC: 2

12 May 2010

5340-12-142-1566
Haube Halter

121421566
HAUBENHALTER NR. 117: RNCC: 3 | RNVC: 2
117: RNCC: 5 | RNVC: 2
117: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-327-7924
Mending Plate

123277924
DK AU 012: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-12-358-6449
Mounting Plate

123586449
2500262-394314.000.0: RNCC: 2 | RNVC: 2
2500262-394314.000.0: RNCC: 3 | RNVC: 2

31 Oct 2002

5340-12-319-6419
Headless Straight Rod

123196419
503269: RNCC: 3 | RNVC: 2
503269: RNCC: 3 | RNVC: 2

20 Oct 1989

5340-12-354-2737
Mechanical Stop

123542737
1658-387300.000.0: RNCC: 2 | RNVC: 2
1658-387300.000.0: RNCC: 3 | RNVC: 2

26 Jun 2001

5340-12-304-7941
Pipe Bracket

123047941
DIN87371-38: RNCC: 2 | RNVC: 2
38DIN87371: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-365-7582
Access Cover

123657582
5161-230000A02B: RNCC: 2 | RNVC: 2
5161-230000A02B: RNCC: 3 | RNVC: 2

1 Feb 2005

5340-12-161-6845
Turnbuckle Body

121616845
100332-16110.02: RNCC: 2 | RNVC: 2
100332-16110.02: RNCC: 5 | RNVC: 2
100332-16110-02: RNCC: 5 | RNVC: 2
100332-16110-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-390-8069
Bow Handle

123908069
OA-12.120.01: RNCC: 3 | RNVC: 2
055410010: RNCC: 5 | RNVC: 2

13 Dec 2012

5340-12-335-3444
Angle Bracket

123353444
6700018-201411.03: RNCC: 2 | RNVC: 2
6700018-201411.03: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-12-194-9927
Angle Bracket

121949927
2500067-101000.01: RNCC: 2 | RNVC: 2
2500067-101000.01: RNCC: 3 | RNVC: 2
2500067-101000-01: RNCC: 5 | RNVC: 9

28 Dec 1982

5340-12-151-4009
Manual Control Handle

121514009
589031: RNCC: 3 | RNVC: 2
3922-0022-589031: RNCC: 5 | RNVC: 2
A22NAN2257: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-194-0855
Handle Grip

121940855
160-626161.07: RNCC: 3 | RNVC: 2
160-626161-07: RNCC: 5 | RNVC: 2
160-626161.07: RNCC: 5 | RNVC: 9

29 Sep 1982

5340-12-702-2005
Mounting Bracket

127022005
VG95211-ML-127022005: RNCC: 2 | RNVC: 2
30.7211.1002: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-332-3921
Protection Bellows

123323921
4603370485: RNCC: 3 | RNVC: 2
3293-53: RNCC: 5 | RNVC: 2
ZR03370485: RNCC: 5 | RNVC: 2

5 Aug 1993

5340-12-330-5975
Angle Bracket

123305975
5300000-00722: RNCC: 3 | RNVC: 2

14 Jan 1993

5340-12-333-6830
Rod End Clevis

123336830
16 326 0802: RNCC: 3 | RNVC: 2
D16 326 0802: RNCC: 5 | RNVC: 2
3482339ED1472-67: RNCC: 5 | RNVC: 2
D1472-67-03.05: RNCC: 5 | RNVC: 2
1472-67-03-05: RNCC: 5 | RNVC: 2

26 Jan 1994

5340-12-356-8181
Angle Bracket

123568181
ED88-0100-01001-121: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-12-320-8288
Access Cover

123208288
51-01313: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-12-393-4287
Mounting Bracket

123934287
J92222362-413: RNCC: 3 | RNVC: 2

16 Sep 2013

5340-12-702-1824
Mounting Bracket

127021824
VG95211-ML-127021824: RNCC: 2 | RNVC: 2
30.7205.80: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-379-4063
Lock-Release Lever

123794063
GN300-63-M8-RT: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-12-320-6905
Nonmetallic Bumper

123206905
9000 9103: RNCC: 3 | RNVC: 2

7 Feb 1990

5340-12-379-1428
Dust And Moisture Seal Protective Cap

123791428
230-369.32: RNCC: 3 | RNVC: 2

26 Jun 2009

5340-12-355-3997
Mounting Bracket

123553997
6012020640: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-390-4034
Dust And Moisture Seal Protective Cover

123904034
2300559-251000.029.0: RNCC: 2 | RNVC: 2
2300559-251000.029.0: RNCC: 3 | RNVC: 2

8 Nov 2012

5340-12-315-6803
Butt Hinge Leaf

123156803
B85 S 100 3: RNCC: 3 | RNVC: 2
B85S1003: RNCC: 5 | RNVC: 2

19 Nov 1988

5340-12-301-0313
Metal Runner

123010313
1423-910.93(1): RNCC: 3 | RNVC: 2

19 Sep 1984

5340-12-368-6894
Dust And Moisture Seal Protective Cap

123686894
704.602.5: RNCC: 3 | RNVC: 2

6 Apr 2006

5340-12-180-2106
Webbing Strap

121802106
5900063-270000.00: RNCC: 2 | RNVC: 2
5900063-270000.00: RNCC: 3 | RNVC: 2
5900063-270000-00: RNCC: 5 | RNVC: 2
5900063-270000.00: RNCC: 5 | RNVC: 9

30 Aug 1979

5340-12-341-1855
Nonmetallic Bumper

123411855
DIN95364-A40X26-M10X27,5-NR60ST: RNCC: 2 | RNVC: 2
909711038: RNCC: 5 | RNVC: 2
530000-40X26-M10X27,5.NR60.ST: RNCC: 5 | RNVC: 2
3018039-11MN60: RNCC: 5 | RNVC: 2
VG95364-A40X26-M10X27,5-NR60ST: RNCC: 5 | RNVC: 9
3018039: RNCC: 5 | RNVC: 9

7 Aug 1996

5340-12-330-4347
Loop Clamp

123304347
DIN3016-1-E2-10-14X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU0.10-14/15-W1: RNCC: 3 | RNVC: 2
DIN3016-E2-10-14X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.10-14/15: RNCC: 5 | RNVC: 2
DIN3016-E2-10-14X15-W1-2: RNCC: 5 | RNVC: 9

15 Dec 1992

5340-12-303-2370
Double Angle Bracket

123032370
RM-WINKELPL/SK: RNCC: 3 | RNVC: 2

8 Mar 1985

5340-12-337-9038
Nonmetallic Bumper

123379038
270218577: RNCC: 3 | RNVC: 2
3201-860.01.00.030-001: RNCC: 5 | RNVC: 2

2 May 1995

5340-12-702-1810
Mounting Bracket

127021810
VG95211-ML-127021810: RNCC: 2 | RNVC: 2
30.7204.250: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-314-6095
Electrical-Mechanical Equipment Post

123146095
512214-2153.000: RNCC: 3 | RNVC: 2
512214-2153: RNCC: 5 | RNVC: 2

22 Jul 1988

5340-12-355-9459
Blank Panel

123559459
J92228387-401: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-353-6861
Multiple Angle Bracket

123536861
J92222234-401: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-702-1642
Mounting Bracket

127021642
VG95211-ML-127021642: RNCC: 2 | RNVC: 2
30.6602.40: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-308-3251
Shelf Bracket

123083251
5800043-1981.00: RNCC: 2 | RNVC: 2
5800043-1981.00: RNCC: 3 | RNVC: 2
5800043-1981.00: RNCC: 5 | RNVC: 9

26 Sep 1986

5340-12-198-1558
Catch Strike

121981558
23302-266500.00: RNCC: 2 | RNVC: 2
2863206: RNCC: 3 | RNVC: 2
23302-266500: RNCC: 5 | RNVC: 9

27 Dec 1983

5340-12-185-4919
Electrical-Mechanical Equipment Post

121854919
CF 407 166: RNCC: 2 | RNVC: 2
CF 407 166: RNCC: 3 | RNVC: 2
CF 407 166: RNCC: 5 | RNVC: 2
CF407166: RNCC: 5 | RNVC: 2
CF407166: RNCC: 5 | RNVC: 2
CF407166: RNCC: 5 | RNVC: 2

11 Oct 1980

5340-12-168-2809
Loop Clamp

121682809
LN9490B11: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-186-2193
Butt Hinge Leaf

121862193
81658010049: RNCC: 3 | RNVC: 2

6 Dec 1980

5340-12-351-4489
Access Cover

123514489
T311M1171101: RNCC: 3 | RNVC: 2

27 Jul 2000

5340-12-342-1589
Mounting Bracket

123421589
533M07041: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-311-9696
Dust And Moisture Seal Protective Cap

123119696
166036: RNCC: 2 | RNVC: 2
166036: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-12-368-1309
Manual Control Handle

123681309
BD5.100.134.276: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-026-7457

5340-12-315-1152
Spring Tension Clip

123151152
2300174-970210.19: RNCC: 2 | RNVC: 2
OWR 000 202: RNCC: 3 | RNVC: 2
2300174-970210.19: RNCC: 5 | RNVC: 2

17 Sep 1988

5340-12-350-5417
Access Cover

123505417
10063-211500: RNCC: 3 | RNVC: 2
10063-211500: RNCC: 5 | RNVC: 9

12 Apr 2000

5340-12-362-4630
Spacing Threaded Standoff

123624630
4.9337.0: RNCC: 3 | RNVC: 2

26 Feb 2004

5340-12-164-2091
Angle Bracket

121642091
100356-401000.01: RNCC: 2 | RNVC: 2
100356-401000.01: RNCC: 5 | RNVC: 2
05768: RNCC: 5 | RNVC: 2
05768: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-3206
Double Angle Bracket

123173206
4900064-412111.003: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-338-7648
Webbing Strap

123387648
540003-2010.00: RNCC: 3 | RNVC: 2
000-D6-25X2,0X1000-BW-RAL6031: RNCC: 6 | RNVC: 9

23 Aug 1995

5340-12-198-4833
Electrical-Mechanical Equipment Post

121984833
5802017-603000.05: RNCC: 2 | RNVC: 2
VG95148D10XM5X50-ST: RNCC: 2 | RNVC: 2
VG95148D10XM5X50-ST: RNCC: 3 | RNVC: 2
5802017-603000.05: RNCC: 3 | RNVC: 2

1 Feb 1984

5340-12-377-5252
Access Cover

123775252
0425 5006: RNCC: 3 | RNVC: 2
0429 6824: RNCC: 5 | RNVC: 9

22 Jan 2009

5340-12-338-7328
Webbing Strap

123387328
2300279-4650.00: RNCC: 2 | RNVC: 2
9873391: RNCC: 3 | RNVC: 2
2300279-4650.00: RNCC: 5 | RNVC: 2
2300279-4650.00: RNCC: 5 | RNVC: 9
9873391: RNCC: 5 | RNVC: 9

22 Aug 1995

5340-12-340-2219
Access Door

123402219
463-630751.004: RNCC: 3 | RNVC: 9
000409-101000.04: RNCC: 5 | RNVC: 9
9898177: RNCC: 5 | RNVC: 9

15 Mar 1996

5340-12-344-2354
Nonmetallic Bumper

123442354
5500780938: RNCC: 3 | RNVC: 2
550 078 09 38: RNCC: 5 | RNVC: 2

6 Oct 1997

5340-12-162-5390
Access Cover

121625390
D3-240-3: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-155-2387
Butt Hinge Leaf

121552387
160-26762-11: RNCC: 3 | RNVC: 2
160-26762-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-189-9025
Lock-Release Lever

121899025
SWN12-0203-05-70: RNCC: 3 | RNVC: 2
SWN12-0203-05-80: RNCC: 3 | RNVC: 2
336-2035NW70: RNCC: 5 | RNVC: 2
336-2035NW80: RNCC: 5 | RNVC: 2
503SWN12-0203-05-80: RNCC: 5 | RNVC: 2
503SWN12-0203-05-80: RNCC: 5 | RNVC: 9

26 Oct 1981

5340-12-374-6906
Mounting Plate

123746906
SK971-171223.003.0: RNCC: 3 | RNVC: 2
7087008: RNCC: 5 | RNVC: 2
1728285: RNCC: 5 | RNVC: 2

7 Mar 2008

5340-12-359-4388
Retaining Strap

123594388
DIN3016-1-F1-35X20-W5-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-342-5260
Angle Bracket

123425260
4068 301 359: RNCC: 3 | RNVC: 2
4068301359: RNCC: 5 | RNVC: 2

24 Feb 1997

5340-12-314-6128
Angle Bracket

123146128
5593181: RNCC: 3 | RNVC: 2

22 Jul 1988

5340-12-130-4707

5340-12-135-6981

5340-12-342-5926
Resilient Mount

123425926
01908221: RNCC: 3 | RNVC: 2
1908221: RNCC: 5 | RNVC: 2

4 Mar 1997

5340-12-323-4794
Webbing Strap

123234794
LE15689: RNCC: 3 | RNVC: 9
LE15689ZURRGURT-TEIL2: RNCC: 5 | RNVC: 9

29 Nov 1990

5340-12-349-8607
Mounting Bracket

123498607
T290M2006101: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-12-183-7758
Sicherheits Schlosz

121837758
181837016: RNCC: 3 | RNVC: 2

20 May 1980

5340-12-199-2301
Pad Eye

121992301
P-896158-401: RNCC: 3 | RNVC: 2
P896158-401: RNCC: 5 | RNVC: 2

5 Apr 1984

5340-12-351-2169
Lock-Release Lever

123512169
3099-00-191000: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-318-1617
Mounting Plate

123181617
R04553-101: RNCC: 3 | RNVC: 2

16 Jun 1989

5340-12-307-5127
Catch Strike

123075127
4616300448: RNCC: 3 | RNVC: 2
8521-74: RNCC: 5 | RNVC: 2

25 Jun 1986

5340-12-323-7751
Flush Lock

123237751
68467: RNCC: 3 | RNVC: 2
68467: RNCC: 3 | RNVC: 9

18 Dec 1990

5340-12-347-8837
Retaining Strap

123478837
5111400241: RNCC: 3 | RNVC: 2
511 140 02 41: RNCC: 5 | RNVC: 2

3 Mar 1999

5340-12-346-1577
Loop Clamp

123461577
3303 SCHWARZ: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-12-360-0966
Mounting Bracket

123600966
9418805514: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-303-9399
Bail Handle

123039399
5810049: RNCC: 3 | RNVC: 2
581 0049: RNCC: 5 | RNVC: 2

23 May 1985

5340-12-371-7211
Helical Compression Spring Seat

123717211
42583: RNCC: 3 | RNVC: 2

8 May 2007

5340-12-305-5187
Nonmetallic Bumper

123055187
81962100329: RNCC: 3 | RNVC: 2
81.96210.0329: RNCC: 5 | RNVC: 2

18 Nov 1985

5340-12-190-9474
Retaining Strap

121909474
4-93421: RNCC: 3 | RNVC: 2

28 Dec 1981

5340-12-164-7744
Compression Cup

121647744
02808363: RNCC: 3 | RNVC: 2
0044-064: RNCC: 5 | RNVC: 2
0044064: RNCC: 5 | RNVC: 2
8403353: RNCC: 5 | RNVC: 2
2808363EE7103-17: RNCC: 5 | RNVC: 2
02808363: RNCC: 5 | RNVC: 9
2808363EE7103-17: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-334-3447
Resilient Mount

123343447
DIN95363-B20X15-M6X7-NR55ST: RNCC: 2 | RNVC: 2
927 994 71 09: RNCC: 5 | RNVC: 2
P009279947109000: RNCC: 5 | RNVC: 2
510016-M6X7.NR55.ST: RNCC: 5 | RNVC: 2
VG95363-B20X15-M6X7-NR55ST: RNCC: 5 | RNVC: 9

28 Apr 1994

5340-12-143-8321
Retaining Strap

121438321
DIN72571-2X4-ST-ZN: RNCC: 2 | RNVC: 2
DIN72571-2X4-ST-ZN: RNCC: 3 | RNVC: 2
DIN72571-2X4-ST: RNCC: 5 | RNVC: 9
DIN72571-2X4-ST: RNCC: 5 | RNVC: 9
030710: RNCC: 5 | RNVC: 9
2X4DIN72571ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-0343
Electrical-Mechanical Equipment Post

121900343
VG95148B5XM3X47-NRST: RNCC: 2 | RNVC: 2
VG95148B5XM3X47-NRST: RNCC: 3 | RNVC: 2
65.7091.360.07-A001: RNCC: 3 | RNVC: 2
65-7091-360-07A001: RNCC: 5 | RNVC: 2

4 Nov 1981

5340-12-375-7593
Block Clamp

123757593
RAN10-215: RNCC: 3 | RNVC: 2

2 Jul 2008

5340-12-348-9266
Mounting Bracket

123489266
245/7383-02-23-00: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-12-365-5848
Multiple Angle Bracket

123655848
J28630089-407: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-363-1907
Mounting Bracket

123631907
GSTR99-00-100000.03: RNCC: 3 | RNVC: 2

12 May 2004

5340-12-154-2178
Nut And Bolt Locking Plate

121542178
100355-110000.08: RNCC: 2 | RNVC: 2
100355-110000-08: RNCC: 3 | RNVC: 2
100355-110000-08: RNCC: 5 | RNVC: 9
100355-110000-08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-2192
Mending Plate

123152192
4900153-31311-00-02: RNCC: 3 | RNVC: 2
4900153-31311-02: RNCC: 5 | RNVC: 9

4 Oct 1988

5340-12-393-8775
Dust And Moisture Seal Protective Plug

123938775
310357: RNCC: 3 | RNVC: 2
5184-02-00-17/35: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-12-162-5503
Loop Clamp

121625503
NA701-27: RNCC: 3 | RNVC: 2
100-9467: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-702-2419
Mounting Plate

127022419
VG95211-ML-127022419: RNCC: 2 | RNVC: 2
30.7702.60.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-315-5072
Handwheel

123155072
1036328: RNCC: 3 | RNVC: 2
23335-040700.00: RNCC: 3 | RNVC: 2
D192070019: RNCC: 3 | RNVC: 2
23335-040700.00: RNCC: 5 | RNVC: 9

29 Oct 1988

5340-12-375-8824
Handwheel

123758824
F1.1289-37-04-01.00-33: RNCC: 3 | RNVC: 2
1103974: RNCC: 5 | RNVC: 2

16 Jul 2008

5340-12-365-5832
Angle Bracket

123655832
J28230106-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-357-5372
Mounting Bracket

123575372
J92228016-003: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-310-3618
Catch Strike

123103618
2300042-188106.002: RNCC: 2 | RNVC: 2
2300042-188106.002: RNCC: 3 | RNVC: 2
2300042-188106.002: RNCC: 5 | RNVC: 9

14 May 1987

5340-12-351-8277
Angle Bracket

123518277
J28230084-001: RNCC: 3 | RNVC: 2

30 Aug 2000

5340-12-327-9685
Access Cover

123279685
5250373: RNCC: 3 | RNVC: 2
525.0373: RNCC: 5 | RNVC: 2

25 Mar 1992

5340-12-329-3880
Retaining Strap

123293880
160-70278-80: RNCC: 3 | RNVC: 2
160-70278-80: RNCC: 5 | RNVC: 9

15 Aug 1992

5340-12-332-6283
Support Hook

123326283
81429020192: RNCC: 3 | RNVC: 2
81.42902.0192: RNCC: 5 | RNVC: 2

31 Aug 1993

5340-12-352-0493
Nonmetallic Bumper

123520493
6019870039: RNCC: 3 | RNVC: 2
601 987 00 39: RNCC: 5 | RNVC: 2

10 Oct 2000

5340-12-393-4536
Retaining Bail

123934536
L219M2847225: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-12-315-0384
Helical Compression Spring Retainer

123150384
15.6711.2005B: RNCC: 3 | RNVC: 2

9 Sep 1988

5340-12-011-4047

5340-12-338-8172
Nonmetallic Bumper

123388172
08 52 516: RNCC: 3 | RNVC: 2
852516: RNCC: 5 | RNVC: 2
90467447: RNCC: 5 | RNVC: 2

28 Aug 1995

5340-12-377-3275
Protection Bellows

123773275
4412670097: RNCC: 3 | RNVC: 2

9 Jan 2009

5340-12-350-5899
Webbing Strap

123505899
4357908596: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-193-6983
Slide Keeper

121936983
16112-210: RNCC: 3 | RNVC: 2

24 Aug 1982

5340-12-307-3748
Angle Bracket

123073748
2875301: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-12-383-3309
Mounting Plate

123833309
7686 040 103: RNCC: 3 | RNVC: 2
5010600592: RNCC: 5 | RNVC: 2

7 Oct 2010

5340-12-316-4815
Butt Hinge Leaf

123164815
00 06 029 400: RNCC: 3 | RNVC: 2
0130 9951: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-316-9660
Access Cover

123169660
3522510004: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-171-4352
Bow Handle

121714352
10061: RNCC: 3 | RNVC: 2
10061C: RNCC: 5 | RNVC: 2

13 Oct 1977

5340-12-319-0960
Mending Plate

123190960
011 050: RNCC: 3 | RNVC: 2
109808: RNCC: 5 | RNVC: 2

6 Sep 1989

5340-12-334-8345
Hand Crank

123348345
BH AA 006: RNCC: 3 | RNVC: 2
BHAA006: RNCC: 5 | RNVC: 2

27 Jun 1994

5340-12-307-2460
Lock-Release Lever

123072460
RP988654: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-392-3262
Mounting Bracket

123923262
4100095-982140.004.0: RNCC: 2 | RNVC: 2
4100095-982140.004.0: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-325-5501
Protection Bellows

123255501
6455280091: RNCC: 3 | RNVC: 2

17 Jun 1991

5340-12-371-4189
Flush Bolt

123714189
409.124 850: RNCC: 3 | RNVC: 2

27 Mar 2007

5340-12-377-4291
Access Cover

123774291
2500171-443100.00: RNCC: 2 | RNVC: 2
2500171-443100.00: RNCC: 3 | RNVC: 2
2500171-443100.00: RNCC: 5 | RNVC: 9

15 Jan 2009

5340-12-319-7627
Rod End Clevis

123197627
297583: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-12-317-6633
Access Cover

123176633
1278 340 079: RNCC: 3 | RNVC: 2
91619728: RNCC: 5 | RNVC: 2
1278340079: RNCC: 5 | RNVC: 9

26 Apr 1989

5340-12-367-5253
Spring Tension Clip

123675253
357611797D: RNCC: 3 | RNVC: 2

29 Aug 2005

5340-12-352-4993
Section Block Clamp

123524993
2201977000: RNCC: 3 | RNVC: 2
220197-7000: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-174-2945
Rigid Caster

121742945
2500035-101200-10: RNCC: 2 | RNVC: 2
2500035-101200-10: RNCC: 5 | RNVC: 2
2500035-101200.10: RNCC: 5 | RNVC: 9

21 Jun 1978

5340-12-184-7777
Mending Plate

121847777
5801505-311113.002: RNCC: 3 | RNVC: 2
5801505-311113-002: RNCC: 5 | RNVC: 2

16 Aug 1980

5340-12-325-7720
Rod End Clevis

123257720
5400026-3800-01: RNCC: 2 | RNVC: 2
5400026-3800-01: RNCC: 3 | RNVC: 2

8 Jul 1991

5340-12-150-8613
Webbing Strap

121508613
390004-140: RNCC: 2 | RNVC: 2
390004-140: RNCC: 3 | RNVC: 2
390004-140: RNCC: 5 | RNVC: 9
390004-140: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-391-9846
Dust And Moisture Seal Protective Cap

123919846
3028320496: RNCC: 3 | RNVC: 2

24 Apr 2013

5340-12-384-6029
Mechanic Equipment Hardware Kit

123846029
518548: RNCC: 3 | RNVC: 2

11 Mar 2011

5340-12-361-4851
Spring Tension Clip

123614851
12019522: RNCC: 3 | RNVC: 2
1202 9522: RNCC: 5 | RNVC: 9

7 Oct 2003

5340-12-328-9603
Angle Bracket

123289603
43709614-601: RNCC: 2 | RNVC: 2
43709614-601: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-308-0686
Detent Plunger

123080686
2601-51.02: RNCC: 3 | RNVC: 2

28 Aug 1986

5340-12-156-2805

5340-12-197-5604
Retaining Strap

121975604
P-295501-003: RNCC: 3 | RNVC: 2
P295501-003: RNCC: 5 | RNVC: 2

2 Nov 1983

5340-12-337-8646
Mounting Bracket

123378646
64414140: RNCC: 3 | RNVC: 2
421.1267-07.3: RNCC: 5 | RNVC: 2
4414/140: RNCC: 5 | RNVC: 9

26 Apr 1995

5340-12-168-2769
Loop Clamp

121682769
DIN3016-2-H1-104X9-W1-2-CR: RNCC: 2 | RNVC: 2
SPGU104/9ZY: RNCC: 3 | RNVC: 2
DIN3016-H1-104X9-W1-2: RNCC: 3 | RNVC: 2
SPGU104-9ZY: RNCC: 5 | RNVC: 2
1219000104: RNCC: 5 | RNVC: 2
VG95931-K104X9-W1: RNCC: 5 | RNVC: 9
DIN3016-H1-104X9-W1-2: RNCC: 5 | RNVC: 9
VG95931K104X9W1: RNCC: 5 | RNVC: 9

4 Mar 1977

5340-12-390-3913
Loop Clamp

123903913
DIN3016-1-D1-32X15-W1-2-NBR: RNCC: 2 | RNVC: 2

7 Nov 2012

5340-12-336-4933
Retaining Strap

123364933
374066: RNCC: 3 | RNVC: 2
374066F1: RNCC: 5 | RNVC: 2
2/1D12/15MMN325: RNCC: 5 | RNVC: 9

18 Nov 1994

5340-12-173-4514
Clamping Catch

121734514
23176-261680.03.0: RNCC: 2 | RNVC: 2
23176-261680.03.0: RNCC: 3 | RNVC: 2
23176-261680-03-0: RNCC: 5 | RNVC: 2
23176-261680.03.0: RNCC: 5 | RNVC: 9
23176-261680.03.0: RNCC: 5 | RNVC: 9
23176-261680-03-0: RNCC: 5 | RNVC: 9

18 Apr 1978

5340-12-180-8885
Electrical-Mechanical Equipment Post

121808885
VG95148B5XM2,5X16-2.0401.20: RNCC: 2 | RNVC: 2
C119-A31-C269: RNCC: 2 | RNVC: 2
C119A31C269: RNCC: 3 | RNVC: 2
VG95148B5XM2,5X16-2.0401.20: RNCC: 3 | RNVC: 2
C119-A31-C269: RNCC: 3 | RNVC: 2
C119-A31-C269: RNCC: 5 | RNVC: 2
C119A31C269: RNCC: 5 | RNVC: 2

11 Oct 1979

5340-12-344-3755
Mounting Plate

123443755
A-296850-006: RNCC: 3 | RNVC: 2
A296850-006: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-701-9534
Pawl Fastener

127019534
VG95211-ML-127019534: RNCC: 2 | RNVC: 2
5.12.6400.0321.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-188-8036
Retaining Strap

121888036
5801479-3060.02: RNCC: 2 | RNVC: 2
5801479-3060.02: RNCC: 3 | RNVC: 2
5801479-3060-02: RNCC: 5 | RNVC: 2
5801479-3060.02: RNCC: 5 | RNVC: 9
5801479-3060-02: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-323-2707
Retaining Bail

123232707
4989024-100: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-12-385-2451
Helical Compression Spring Retainer

123852451
F1.1189-40-40-10.00-09: RNCC: 3 | RNVC: 2

12 May 2011

5340-12-386-8272
Electronic Equipment Hardware Kit

123868272
550253-0000.00: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-12-337-2796
Mounting Bracket

123372796
326-55-0100-09: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-12-158-1304
Case Corner

121581304
31081: RNCC: 3 | RNVC: 2
5800357-800000.37: RNCC: 5 | RNVC: 9
5800357-800000-37: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-0203
Mounting Plate

123650203
GLD99-00-111000.16: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-165-3574
Mending Plate

121653574
307.141-10002.03: RNCC: 3 | RNVC: 2
0307141-10002-03: RNCC: 5 | RNVC: 9

23 Apr 1976

5340-12-361-6490
Loop Clamp

123616490
05624642143: RNCC: 3 | RNVC: 2
51.97445-0065: RNCC: 5 | RNVC: 2
51974450065: RNCC: 5 | RNVC: 2

29 Oct 2003

5340-12-338-8874
Double Angle Bracket

123388874
4900319-303000.01: RNCC: 2 | RNVC: 2
4900319-303000.01: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-12-122-5882
Halter

121225882
4044210046: RNCC: 3 | RNVC: 2
064041103100: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-187-1645
Resilient Mount

121871645
1113500275: RNCC: 3 | RNVC: 2

9 Mar 1981

5340-12-379-8952
Retaining Strap

123798952
06910410: RNCC: 3 | RNVC: 2
CV168986: RNCC: 5 | RNVC: 2
06910410: RNCC: 5 | RNVC: 2

10 Sep 2009

5340-12-310-5301
Bridge Clamp

123105301
78203 51154: RNCC: 2 | RNVC: 2
7820351154: RNCC: 3 | RNVC: 2
78203 51154: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-307-7039
Double Angle Bracket

123077039
RP988672: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-362-4887
Quick Release Plunger

123624887
2205308: RNCC: 3 | RNVC: 2
EH2205.308: RNCC: 5 | RNVC: 9

3 Mar 2004

5340-12-318-1271
Door Holder

123181271
1000173-190340.000.0: RNCC: 2 | RNVC: 2
1000173-190340.000.0: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-12-320-4673
Headless Straight Rod

123204673
8-4088.00: RNCC: 2 | RNVC: 2
8-4088.00: RNCC: 3 | RNVC: 2
8-4088.00: RNCC: 5 | RNVC: 9

17 Jan 1990

5340-12-362-9328
Mounting Bracket

123629328
4617700314: RNCC: 3 | RNVC: 2
S 721 1 75 132 3: RNCC: 5 | RNVC: 9

16 Apr 2004

5340-12-198-5827
Metal Runner

121985827
5802017-701300.00: RNCC: 2 | RNVC: 2
2-09.029: RNCC: 3 | RNVC: 2
5802017-701300.00: RNCC: 3 | RNVC: 2
5802017-701300.00: RNCC: 5 | RNVC: 2
5802017-701300.00: RNCC: 5 | RNVC: 9

14 Feb 1984

5340-12-702-2180
Mounting Bracket

127022180
VG95211-ML-127022180: RNCC: 2 | RNVC: 2
30.7225.130: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-389-1246
Swivel Caster

123891246
LH-GTH 200K-FI: RNCC: 3 | RNVC: 2

29 May 2012

5340-12-308-9855
Electrical-Mechanical Equipment Post

123089855
VG95148C5XM2,5X10-ST: RNCC: 2 | RNVC: 2
VG95148C5XM2,5X10-ST: RNCC: 3 | RNVC: 2
18H160: RNCC: 3 | RNVC: 2

4 Dec 1986

5340-12-341-6971
Mending Plate

123416971
03.161.63.01.0: RNCC: 3 | RNVC: 2

16 Oct 1996

5340-12-194-6532
Metal Runner

121946532
0930555: RNCC: 3 | RNVC: 2
75D9.5.9: RNCC: 5 | RNVC: 2

25 Nov 1982

5340-12-380-2194
Rod End Clevis

123802194
110200100020: RNCC: 3 | RNVC: 2
10200100020: RNCC: 5 | RNVC: 9

7 Oct 2009

5340-12-353-7069
Dust And Moisture Seal Protective Cap

123537069
47365122100: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-197-0432
Rim Lock

121970432
4950020090: RNCC: 3 | RNVC: 2
0007230801: RNCC: 5 | RNVC: 2

13 Sep 1983

5340-12-311-8695
Mending Plate

123118695
2300074-4704.00: RNCC: 2 | RNVC: 2
2300074-4704.00: RNCC: 3 | RNVC: 2
2300074-4704.00: RNCC: 5 | RNVC: 9

26 Oct 1987

5340-12-312-3435
Webbing Strap

123123435
100000831: RNCC: 2 | RNVC: 2
100000831: RNCC: 3 | RNVC: 2

18 Dec 1987

5340-12-023-2712

5340-12-132-9928

5340-12-372-0437
Bow Handle

123720437
7778493: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-12-179-6574
Spring Tension Clip

121796574
5240077: RNCC: 3 | RNVC: 2

13 Jul 1979

5340-12-315-5172
Dust And Moisture Seal Protective Cap

123155172
293297: RNCC: 3 | RNVC: 2
293297C84086: RNCC: 5 | RNVC: 2

29 Oct 1988

5340-12-303-3614
Catch Strike

123033614
714-001300-920-0: RNCC: 3 | RNVC: 2
714-001300-920-0: RNCC: 5 | RNVC: 2
37L15-1A: RNCC: 5 | RNVC: 9

18 Mar 1985

5340-12-348-5978
Double Angle Bracket

123485978
7068-21220-120-2: RNCC: 3 | RNVC: 2

23 Jul 1999

5340-12-386-8762
Flush Lock

123868762
SK871-182336.001.0: RNCC: 3 | RNVC: 2
7079044: RNCC: 5 | RNVC: 2
17068600EGS00: RNCC: 5 | RNVC: 9
7079044: RNCC: 5 | RNVC: 9

11 Oct 2011

5340-12-336-0246
Mounting Bracket

123360246
2782-182001.001.0: RNCC: 2 | RNVC: 2
2782-182001.001.0: RNCC: 3 | RNVC: 2

13 Oct 1994

5340-12-144-9687
Hinge Torsion Bar

121449687
LN9373-4X128: RNCC: 2 | RNVC: 2
4X128LN9373: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-181-7151
Nonmetallic Bumper

121817151
4H050-2606: RNCC: 3 | RNVC: 2

12 Dec 1979

5340-12-166-7320
Snap Hook

121667320
DIN5299-E80ZN: RNCC: 2 | RNVC: 2
DIN5299-E80-ZN: RNCC: 3 | RNVC: 2
226-80X8 VERZINKT: RNCC: 3 | RNVC: 9
DIN5299-E80-VERZINKT: RNCC: 5 | RNVC: 2
E80DIN5299VERZINKT: RNCC: 5 | RNVC: 2
0068041: RNCC: 5 | RNVC: 2

12 Oct 1976

5340-12-156-5532
Retaining Strap

121565532
12003-9: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-177-2866
Halter

121772866
606A914: RNCC: 3 | RNVC: 2

24 Jan 1979

5340-12-182-4236
Butt Hinge Leaf

121824236
B32X3X64HAN16515-3-3214-7: RNCC: 3 | RNVC: 2

1 Feb 1980

5340-12-368-5552
Double Angle Bracket

123685552
5981-181702.000.0: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-12-148-8956
Expansion Plug

121488956
0115 2711: RNCC: 3 | RNVC: 2
6.0215.21.8.0030: RNCC: 3 | RNVC: 9
1218 7576: RNCC: 5 | RNVC: 2
6-206-0-976-001-4: RNCC: 5 | RNVC: 9
6.206.0.976.001.4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-344-4688
Nonmetallic Bumper

123444688
2500255-000006.003.0: RNCC: 2 | RNVC: 2
2500255-000006.003.0: RNCC: 3 | RNVC: 2
2500255-000006.003.0: RNCC: 5 | RNVC: 2

30 Oct 1997

5340-12-174-2921
Retaining Strap

121742921
23223-060000.01.0: RNCC: 2 | RNVC: 2
23223-060000-01-0: RNCC: 5 | RNVC: 2
23223-060000.01.0: RNCC: 5 | RNVC: 2
23223-060000-01-0: RNCC: 5 | RNVC: 9
23223-060000.01.0: RNCC: 5 | RNVC: 9

21 Jun 1978

5340-12-348-1570
Mounting Bracket

123481570
95048-140-023-005: RNCC: 3 | RNVC: 2
95048-140-023-005: RNCC: 5 | RNVC: 9

26 Apr 1999

5340-12-312-9867
Casement Fastener

123129867
52E02-01-1AF: RNCC: 3 | RNVC: 2
1070210: RNCC: 5 | RNVC: 2

24 Feb 1988

Load More Results