What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 28 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 28 of 178

5340-12-365-7614
Catch Strike

123657614
E2.46.00.08/5: RNCC: 3 | RNVC: 2

1 Feb 2005

5340-12-376-7272
Pipe Hanger

123767272
111M13713/1: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-12-094-9336

5340-12-177-0306

5340-12-378-8848
Double Angle Bracket

123788848
90.5204.1303: RNCC: 3 | RNVC: 2
90.5204.1303: RNCC: 5 | RNVC: 2

26 May 2009

5340-12-340-2611
Access Cover

123402611
177A47026: RNCC: 3 | RNVC: 2
177A47026 D1: RNCC: 5 | RNVC: 2

20 Mar 1996

5340-12-328-9635
Pipe Hanger

123289635
2050000045: RNCC: 3 | RNVC: 2
0730990352: RNCC: 5 | RNVC: 2

3 Jul 1992

5340-12-359-4398
Loop Clamp

123594398
0049978290: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-12-175-1283
Nonmetallic Bumper

121751283
3818110496: RNCC: 3 | RNVC: 2

28 Aug 1978

5340-12-317-1807
Mounting Bracket

123171807
4603150194: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-179-6965
Angle Bracket

121796965
4354261940: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-12-022-0666

5340-12-094-6298

5340-12-093-6630

5340-12-390-4244
Block Clamp

123904244
ECS6088G1C03A: RNCC: 3 | RNVC: 2

12 Nov 2012

5340-12-316-2279
Rod End Connector

123162279
4602801786: RNCC: 3 | RNVC: 2
7201220702: RNCC: 3 | RNVC: 9

3 Jan 1989

5340-12-322-8610
Vent Plug

123228610
232891: RNCC: 3 | RNVC: 2
217270: RNCC: 5 | RNVC: 9

28 Sep 1990

5340-12-385-2365
Access Door Hinge

123852365
F1.1781-40-01-30.00-00: RNCC: 3 | RNVC: 2

12 May 2011

5340-12-701-6519
Mounting Bracket

127016519
VG95211-ML-127016519: RNCC: 2 | RNVC: 2
5.12.7206.1750.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-308-4268
Angle Bracket

123084268
P-243877-751: RNCC: 3 | RNVC: 2
P243877-751: RNCC: 5 | RNVC: 2

9 Oct 1986

5340-12-379-2501
Rod End Clevis

123792501
2300500-149050.07.0: RNCC: 2 | RNVC: 2
2300500-149050.07.0: RNCC: 3 | RNVC: 2

8 Jul 2009

5340-12-341-8837
Access Door

123418837
FT2731000: RNCC: 3 | RNVC: 2
FT 2731: RNCC: 5 | RNVC: 2
88-5002: RNCC: 5 | RNVC: 2

12 Nov 1996

5340-12-386-4841
Mounting Plate

123864841
009-221.279-010: RNCC: 3 | RNVC: 2

5 Sep 2011

5340-12-191-2516
Strap Bolt

121912516
2500058-110200.01: RNCC: 2 | RNVC: 2
2500058-110200.01: RNCC: 3 | RNVC: 2
2500058-110200.01: RNCC: 3 | RNVC: 2
2500058-110200.01: RNCC: 5 | RNVC: 2
2500058-110200.01: RNCC: 5 | RNVC: 9
2500058-110200.01: RNCC: 5 | RNVC: 9

20 Jan 1982

5340-12-336-7115
Butt Hinge

123367115
999701-221300.01: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-12-358-5888
Angle Bracket

123585888
J92228088-001: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-328-6318
Webbing Strap

123286318
2653-971072.00: RNCC: 2 | RNVC: 2
2653-971072.00: RNCC: 3 | RNVC: 2
000-C2-25X2,5X460-PE-RAL6031: RNCC: 6 | RNVC: 9

11 Jun 1992

5340-12-324-5402
Loop Clamp

123245402
DIN3016-1-D2-13-11X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-13-11X15-W5: RNCC: 3 | RNVC: 2
RSGU1.13-11/15-W5: RNCC: 3 | RNVC: 2
DIN3016-D2-13-11X15-W5: RNCC: 5 | RNVC: 9

27 Feb 1991

5340-12-301-2057
Angle Bracket

123012057
A-295039-401: RNCC: 3 | RNVC: 2
A295039-401: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-316-6616
Double Angle Bracket

123166616
51125400178: RNCC: 3 | RNVC: 2
51125400178: RNCC: 3 | RNVC: 2
51.12540-0178: RNCC: 5 | RNVC: 2
51.12540-0178: RNCC: 5 | RNVC: 2

31 Jan 1989

5340-12-391-3488
Permanent Magnet

123913488
SK996-970220.000.0: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-12-161-0013
Electrical-Mechanical Equipment Post

121610013
23176-149095.01.0: RNCC: 2 | RNVC: 2
23176-149095-01-0: RNCC: 5 | RNVC: 2
23176-149095-01-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-161-1184
Loop Clamp

121611184
G13TAN15802-0: RNCC: 3 | RNVC: 2
G13TAN15802-3-1364-5: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-334-5119
Vent Plug

123345119
GN552-42-R3/4-A-1: RNCC: 3 | RNVC: 2
GN552A1-R3/4: RNCC: 5 | RNVC: 2

18 May 1994

5340-12-194-8453
Butt Hinge Leaf

121948453
SK17201-180123.000.0: RNCC: 3 | RNVC: 2
SK17201-180123.000.0: RNCC: 5 | RNVC: 9

14 Dec 1982

5340-12-393-3687
Loop Clamp

123933687
2300500-208005.00.0: RNCC: 2 | RNVC: 2
2300500-208005.00.0: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-12-358-0540
Mounting Bracket

123580540
D0101192-001: RNCC: 3 | RNVC: 2

6 Sep 2002

5340-12-354-5170
Mechanical Stop

123545170
E31244 -00: RNCC: 3 | RNVC: 2

24 Jul 2001

5340-12-377-4473
Loop Clamp

123774473
BRSGU38/25N16016: RNCC: 3 | RNVC: 2

16 Jan 2009

5340-12-309-0424
Angle Bracket

123090424
5801759-114020.00: RNCC: 2 | RNVC: 2
7400085-0520.00: RNCC: 3 | RNVC: 2
065-043031.00: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-12-190-6848
Door Button

121906848
NO PRIMARY REF 12-190-6848: RNCC: 3 | RNVC: 2
28/60662.00: RNCC: 5 | RNVC: 9
5511860662: RNCC: 5 | RNVC: 9
28-60662-00: RNCC: 5 | RNVC: 9
5511 860662: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-394-1071
Angle Bracket

123941071
J53222078-002: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-12-355-2417
Runner

123552417
5400049-128330.00: RNCC: 2 | RNVC: 2
5400049-128330.00: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-12-165-3305
Mending Plate

121653305
9XB099031-00: RNCC: 3 | RNVC: 2
099031-00: RNCC: 5 | RNVC: 2

9 Apr 1976

5340-12-328-4713
Electrical-Mechanical Equipment Post

123284713
C42080-A34-C68: RNCC: 2 | RNVC: 2
C42080-A34-C68: RNCC: 3 | RNVC: 2

22 May 1992

5340-12-322-5565
Bow Handle

123225565
VG95149A100X90-M4-NRST-PASSIVIER: RNCC: 2 | RNVC: 2
VA10.100X100XM4.31.PASSIVIERT: RNCC: 3 | RNVC: 2
MEM3-1030P4: RNCC: 5 | RNVC: 2

31 Aug 1990

5340-12-369-5611
Handwheel

123695611
NO PRIMARY REF 12-369-5611: RNCC: 3 | RNVC: 2
7076551: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-12-700-8545
Loop Clamp

127008545
VG95211-ML-127008545: RNCC: 2 | RNVC: 2
155N1119-624: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-338-8032
Mounting Bracket

123388032
6700017-202800.01: RNCC: 2 | RNVC: 2
6700017-202800.01: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-327-6571
Resilient Mount

123276571
E1H 42-11 EC: RNCC: 3 | RNVC: 2
E1H42-11EC: RNCC: 5 | RNVC: 2

14 Feb 1992

5340-12-198-7057
Webbing Strap

121987057
2500138-110000.01: RNCC: 2 | RNVC: 2
2500138-110000.01: RNCC: 5 | RNVC: 9

20 Feb 1984

5340-12-178-8307
Support Hook

121788307
01TC31855: RNCC: 3 | RNVC: 2

18 May 1979

5340-12-179-4171
Resilient Mount

121794171
211199231C: RNCC: 3 | RNVC: 9

27 Jun 1979

5340-12-134-6747

5340-12-315-0348
Mending Plate

123150348
30817-886: RNCC: 3 | RNVC: 2

9 Sep 1988

5340-12-386-1538
Loop Clamp

123861538
02169032: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-315-8274
Access Cover

123158274
54.0026.038.00: RNCC: 3 | RNVC: 2
54002603800: RNCC: 5 | RNVC: 2

30 Nov 1988

5340-12-326-8154
Webbing Strap

123268154
4062-951: RNCC: 3 | RNVC: 2

29 Oct 1991

5340-12-164-1040

5340-12-388-7563
Dust And Moisture Seal Protective Plug

123887563
660.701450: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-393-4977
Mounting Bracket

123934977
4494118: RNCC: 3 | RNVC: 2
400.0125.00322: RNCC: 5 | RNVC: 2
4494118: RNCC: 5 | RNVC: 2

19 Sep 2013

5340-12-094-9642

5340-12-384-8035
Lock-Release Lever

123848035
F1.1189-30-10-10.00-32: RNCC: 3 | RNVC: 2

30 Mar 2011

5340-12-171-6535
Retaining Clip

121716535
CF419024A: RNCC: 3 | RNVC: 2
CF 419 024: RNCC: 5 | RNVC: 2
CF 419 024 A: RNCC: 5 | RNVC: 2
CF419024: RNCC: 5 | RNVC: 2
CF419024A: RNCC: 5 | RNVC: 2
CF 419 024: RNCC: 5 | RNVC: 2
CF 419 024 A: RNCC: 5 | RNVC: 2
CF419024A: RNCC: 5 | RNVC: 2
CF 419 024: RNCC: 5 | RNVC: 2
CF 419 024 A: RNCC: 5 | RNVC: 2

3 Nov 1977

5340-12-361-3333
Angle Bracket

123613333
51081400037: RNCC: 3 | RNVC: 2
51.08140-0037: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-360-0967
Mounting Bracket

123600967
9418805614: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-366-4963
Angle Bracket

123664963
2 0070-918: RNCC: 3 | RNVC: 2
2 0070-918: RNCC: 5 | RNVC: 2

29 Apr 2005

5340-12-316-6914
Mounting Plate

123166914
51-51714: RNCC: 3 | RNVC: 2

2 Feb 1989

5340-12-354-1786
Access Cover

123541786
03934801: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-365-4563
Ball Socket Seat

123654563
1601085-2220.02A: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-12-378-4277
Strap Fastener Loop

123784277
P20599: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-333-2113
Mounting Bracket

123332113
81669225007: RNCC: 2 | RNVC: 2
81669225007: RNCC: 3 | RNVC: 2
81.66922.5007: RNCC: 3 | RNVC: 2

10 Nov 1993

5340-12-383-8683
Bow Handle

123838683
GR B 3 SA: RNCC: 3 | RNVC: 2
237055: RNCC: 5 | RNVC: 2

15 Dec 2010

5340-12-359-7333
Mounting Bracket

123597333
S281M3035101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-317-6983
Rod End Clevis

123176983
3228800076: RNCC: 3 | RNVC: 2

2 May 1989

5340-12-337-3656
Webbing Strap

123373656
88968025001: RNCC: 3 | RNVC: 2
88.96802.5001: RNCC: 5 | RNVC: 2

21 Feb 1995

5340-12-360-1304
Mounting Bracket

123601304
9424601635: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-178-7969
Plain Solid Disk

121787969
0332051040: RNCC: 3 | RNVC: 2

16 May 1979

5340-12-360-1306
Mounting Bracket

123601306
9424602035: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-702-5063
Rod End Connector

127025063
VG95211-ML-127025063: RNCC: 2 | RNVC: 2
5.51.6501.0862.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-187-6898
Electrical-Mechanical Equipment Post

121876898
B647-53-1: RNCC: 3 | RNVC: 2

29 Apr 1981

5340-12-330-3988
Pad Eye

123303988
2300109-181411.002.0: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-12-358-2812
Door Button

123582812
2500262-192900.007.0: RNCC: 2 | RNVC: 2
2500262-192900.007.0: RNCC: 3 | RNVC: 2

8 Oct 2002

5340-12-193-1616
Dust And Moisture Seal Protective Cap

121931616
E 2613: RNCC: 3 | RNVC: 2
904-02613-00: RNCC: 5 | RNVC: 2
E 2613: RNCC: 5 | RNVC: 9
904-02613-00: RNCC: 5 | RNVC: 9

28 Jun 1982

5340-12-316-8703
Mounting Bracket

123168703
5600023-060410.000.0: RNCC: 2 | RNVC: 2
5600023-060410.000.0: RNCC: 3 | RNVC: 2
1271912: RNCC: 5 | RNVC: 2
22009.0.12.110.00: RNCC: 5 | RNVC: 9
22009.0.12.110.00: RNCC: 5 | RNVC: 9

20 Feb 1989

5340-12-322-4083
Nonmetallic Bumper

123224083
702-244110-907-0: RNCC: 3 | RNVC: 2

20 Aug 1990

5340-12-371-4579
Mounting Bracket

123714579
1855-010600.001.0: RNCC: 3 | RNVC: 2

2 Apr 2007

5340-12-701-8557
Loop Clamp

127018557
VG95211-ML-127018557: RNCC: 2 | RNVC: 2
5891A-8: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-315-2595
Retaining Strap

123152595
4-135-0018: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-12-141-3301
Strap Hinge

121413301
2509-107.376: RNCC: 2 | RNVC: 2
2509-107.376: RNCC: 3 | RNVC: 2
0503.005.00.3: RNCC: 3 | RNVC: 2
0503.005.00.3: RNCC: 5 | RNVC: 2
4649-50MM: RNCC: 5 | RNVC: 2
2509-107-200: RNCC: 5 | RNVC: 9
2509-107.376: RNCC: 5 | RNVC: 9
2509-107.376: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-361-6454
Retaining Strap

123616454
X206A02-61: RNCC: 3 | RNVC: 2
X206A02-61: RNCC: 3 | RNVC: 9

29 Oct 2003

5340-12-321-7309
Angle Bracket

123217309
L0266-521: RNCC: 2 | RNVC: 2

20 Jun 1990

5340-12-347-6032
Mounting Bracket

123476032
8854 131-121: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-304-7987
Double Angle Bracket

123047987
15150-08-74-275-00-0: RNCC: 3 | RNVC: 2
15150-08-74-275-00-0: RNCC: 5 | RNVC: 9
15150-08-74-275-00-0: RNCC: 5 | RNVC: 9

26 Aug 1985

5340-12-301-7515
Butt Hinge Leaf

123017515
23111-6104.03: RNCC: 2 | RNVC: 2
23111-6104.03: RNCC: 3 | RNVC: 2
23111-6104-03: RNCC: 5 | RNVC: 9
23111-6104.03: RNCC: 5 | RNVC: 9
23111-6104.03: RNCC: 5 | RNVC: 9
23111-6104-03: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-12-198-8442
Angle Bracket

121988442
1686-454000.02: RNCC: 3 | RNVC: 2
1686-454000-02: RNCC: 5 | RNVC: 2
1686-454000.02: RNCC: 5 | RNVC: 9

3 Mar 1984

5340-12-351-0474
Nonmetallic Solid Wheel

123510474
2500113-2460.06: RNCC: 2 | RNVC: 2
2500113-2460.06: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-387-0287
Access Cover

123870287
492-190140.000: RNCC: 2 | RNVC: 2
492-190140.000: RNCC: 3 | RNVC: 2

27 Oct 2011

5340-12-357-8018
Block Clamp

123578018
E31631-00: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-12-333-2131
Friction Catch Stud

123332131
0019881242: RNCC: 3 | RNVC: 2
211 408 000: RNCC: 5 | RNVC: 9
201 576 000: RNCC: 5 | RNVC: 9

10 Nov 1993

5340-12-309-0295
Extension Drawer Slide

123090295
VS7048T023: RNCC: 3 | RNVC: 2
VS7048T023: RNCC: 5 | RNVC: 9

9 Dec 1986

5340-12-333-3449
Rod End Connector

123333449
81427400004: RNCC: 3 | RNVC: 2
81.42740.0004: RNCC: 5 | RNVC: 2

3 Dec 1993

5340-12-385-4232
Angle Bracket

123854232
5562033540: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-199-2629
Nonmetallic Bumper

121992629
03605325: RNCC: 3 | RNVC: 2
H.B 913SV 1056 1975 03 60 5325: RNCC: 5 | RNVC: 9

6 Apr 1984

5340-12-358-7843
Mechanical Stop

123587843
2481-391910.005.0: RNCC: 2 | RNVC: 2
2481-391910.005.0: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-352-5689
Spacing Threaded Standoff

123525689
5.07.053: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-354-8289
Leather Strap

123548289
2300458-415100.000: RNCC: 2 | RNVC: 2
9944233: RNCC: 3 | RNVC: 2
2300458-415100.000: RNCC: 5 | RNVC: 9

29 Aug 2001

5340-12-382-5900
Bow Handle

123825900
1831835: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-12-314-5604
Resilient Mount

123145604
G4-ZF01HDVG: RNCC: 3 | RNVC: 2
2-002008: RNCC: 5 | RNVC: 2

19 Jul 1988

5340-12-021-5917

5340-12-179-3707
Mounting Bracket

121793707
CF 305 892: RNCC: 3 | RNVC: 2
CF 305 892: RNCC: 5 | RNVC: 2
CF 305 892: RNCC: 5 | RNVC: 2
CF305892: RNCC: 5 | RNVC: 9
CF305892: RNCC: 5 | RNVC: 9
CF305892: RNCC: 5 | RNVC: 9

27 Jun 1979

5340-12-701-5685
Mounting Bracket

127015685
VG95211-ML-127015685: RNCC: 2 | RNVC: 2
5.12.6149.0020.14: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-150-6405
Loop Clamp

121506405
DIN3016-2-G1-166X15-W1-2: RNCC: 2 | RNVC: 2
SP166/15SKZ: RNCC: 3 | RNVC: 2
DIN3016-G1-166X15-W1-2: RNCC: 3 | RNVC: 2
1410000166: RNCC: 5 | RNVC: 2
SP166-15SKZ: RNCC: 5 | RNVC: 2
VG95931-G166X15-W1: RNCC: 5 | RNVC: 9
VG95931G166X15W1: RNCC: 5 | RNVC: 9
DIN3016-G1-166X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-2000
Mounting Bracket

127012000
VG95211-ML-127012000: RNCC: 2 | RNVC: 2
5.12.0603.0261.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-9464
Angle Bracket

121969464
4900059-121110.004.0: RNCC: 3 | RNVC: 2
4900059-121110-004-0: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-346-7482
Door Button

123467482
E3-27-1: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-349-2668
Liquid Holding Unit Filler Neck

123492668
4.013-025.0: RNCC: 3 | RNVC: 2
4.013-025: RNCC: 5 | RNVC: 2

19 Oct 1999

5340-12-370-3781
Mechanical Stop

123703781
V6520-03012-102: RNCC: 2 | RNVC: 2
V6520-03012-102: RNCC: 3 | RNVC: 2

31 Oct 2006

5340-12-368-0729
Mounting Bracket

123680729
ED88-0600-00202-041: RNCC: 2 | RNVC: 2
ED88-0600-00202-041: RNCC: 3 | RNVC: 2

1 Dec 2005

5340-12-155-6923
Angle Bracket

121556923
1950-11: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-367-3963
Escutcheon Plate

123673963
NO PRIMARY REF 12-367-3963: RNCC: 3 | RNVC: 2
7069412: RNCC: 5 | RNVC: 2

15 Aug 2005

5340-12-175-1840
Angle Bracket

121751840
04458484: RNCC: 3 | RNVC: 2
4458484EE5074-29: RNCC: 5 | RNVC: 2

30 Aug 1978

5340-12-374-4839
Mounting Plate

123744839
453 6302-001: RNCC: 3 | RNVC: 2
453 6302-001: RNCC: 5 | RNVC: 2

21 Feb 2008

5340-12-311-6591
Resilient Mount

123116591
3118004/11MN65: RNCC: 3 | RNVC: 2
FLACHLAGER-3118004.NR65.ST: RNCC: 3 | RNVC: 2
3118004SHORE65: RNCC: 5 | RNVC: 2

1 Oct 1987

5340-12-306-5527
Butt Hinge

123065527
20817-110: RNCC: 3 | RNVC: 2

10 Mar 1986

5340-12-171-7478
Nonmetallic Bumper

121717478
490126-30013-01: RNCC: 3 | RNVC: 2
895421: RNCC: 5 | RNVC: 2

10 Nov 1977

5340-12-167-7019
Electrical-Mechanical Equipment Post

121677019
1040-12-00-014-05: RNCC: 3 | RNVC: 2
81.27506-0001: RNCC: 5 | RNVC: 2
81275060001: RNCC: 5 | RNVC: 2
0005421947: RNCC: 5 | RNVC: 2
0005420646: RNCC: 5 | RNVC: 2
1040-12-00-014-05: RNCC: 5 | RNVC: 9

17 Jan 1977

5340-12-364-4431
Spacing Threaded Standoff

123644431
5161-420000A03B: RNCC: 2 | RNVC: 2
5161-420000A03B: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-701-9706
Angle Bracket

127019706
VG95211-ML-127019706: RNCC: 2 | RNVC: 2
01.9202.220: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-321-6139
Angle Bracket

123216139
702-244600-901-0: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-344-4738
Angle Bracket

123444738
P-244202-001: RNCC: 3 | RNVC: 2
P244202-001: RNCC: 5 | RNVC: 2

30 Oct 1997

5340-12-358-2816
Sliding Door Track

123582816
2500261-065400.000.0: RNCC: 2 | RNVC: 2
2500261-065400.000.0: RNCC: 3 | RNVC: 2

8 Oct 2002

5340-12-371-9587
Mounting Bracket

123719587
SLT50-0-5300: RNCC: 3 | RNVC: 2
3212148: RNCC: 5 | RNVC: 2

4 Jun 2007

5340-12-148-3198
Hand Crank

121483198
VG85086-A-100X9-GT: RNCC: 2 | RNVC: 2
VG85086-A-100X9-GT: RNCC: 3 | RNVC: 2
VG85086-A-100X9-GT: RNCC: 3 | RNVC: 2
VG85086-A-100X9-GT: RNCC: 3 | RNVC: 9
604077: RNCC: 5 | RNVC: 2
61820030: RNCC: 5 | RNVC: 2
A100X9VG85086GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-361-6352
Mounting Plate

123616352
704-121422-911-0: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-12-322-8672
Angle Bracket

123228672
704-145220-902-0: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-12-365-2257
Spacing Threaded Standoff

123652257
2866-065821.007.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-300-3113
Butt Hinge

123003113
3097401237: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-043-2340

5340-12-198-8313
Catch Strike

121988313
3526600059: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-12-320-9088
Mounting Bracket

123209088
0223 3495: RNCC: 3 | RNVC: 2
02233495KZ0150-15: RNCC: 5 | RNVC: 2

5 Mar 1990

5340-12-175-1005
Nonmetallic Bumper

121751005
3817660197: RNCC: 3 | RNVC: 2

23 Aug 1978

5340-12-319-4609
Bridge Clamp

123194609
504245: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-375-8272
Swivel Caster

123758272
LE-VE 200R: RNCC: 3 | RNVC: 2

9 Jul 2008

5340-12-393-2430
Mending Plate

123932430
4100098-722030.004.0: RNCC: 2 | RNVC: 2
4100098-722030.004.0: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-12-320-7047
Angle Bracket

123207047
CF 445 774 B: RNCC: 2 | RNVC: 2
CF 445 774 B: RNCC: 3 | RNVC: 2
CF 445 774 B: RNCC: 5 | RNVC: 2

8 Feb 1990

5340-12-383-4127
Block Clamp

123834127
1542308: RNCC: 3 | RNVC: 2
582-961100.00.0: RNCC: 5 | RNVC: 2

18 Oct 2010

5340-12-309-6970
Access Cover

123096970
2500179-350220.000.0: RNCC: 2 | RNVC: 2
2500179-350220.000.0: RNCC: 3 | RNVC: 2

17 Feb 1987

5340-12-388-5131
Angle Bracket

123885131
2000002-991020.003.0: RNCC: 3 | RNVC: 2

28 Mar 2012

5340-12-194-3694
Loop Clamp

121943694
4605065041: RNCC: 3 | RNVC: 2
721 1 88 066 1: RNCC: 5 | RNVC: 9

27 Oct 1982

5340-12-301-1961
Angle Bracket

123011961
1423-911.08(4): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-314-8578
Spring Tension Clip

123148578
2360-261120.01.0: RNCC: 2 | RNVC: 2
2360-261120.01.0: RNCC: 3 | RNVC: 2
2360-261120.01.0: RNCC: 5 | RNVC: 2

19 Aug 1988

5340-12-192-8954
Double Angle Bracket

121928954
4608810214: RNCC: 3 | RNVC: 2
721 1 69 015 1: RNCC: 5 | RNVC: 9

3 Jun 1982

5340-12-351-9106
Loop Clamp

123519106
34 32 2 314 637: RNCC: 3 | RNVC: 2

14 Sep 2000

5340-12-359-7562
Webbing Strap

123597562
01155-2 FE=0,42M/LE=0,3M: RNCC: 3 | RNVC: 2

7 Mar 2003

5340-12-302-5522
Mending Plate

123025522
YK03220471: RNCC: 3 | RNVC: 2
03220471: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 22 0471: RNCC: 5 | RNVC: 9

11 Jan 1985

5340-12-166-6515
Helical Compression Spring Seat

121666515
WW 415 314 E: RNCC: 2 | RNVC: 2
WW 415 314 E: RNCC: 3 | RNVC: 9
WW 415 314 D: RNCC: 5 | RNVC: 2
WW 415 314 E: RNCC: 5 | RNVC: 2
WW415314D: RNCC: 5 | RNVC: 2
WW 415 314 D: RNCC: 5 | RNVC: 9
WW415314D: RNCC: 5 | RNVC: 9

30 Sep 1976

5340-12-197-0540
Strap Hinge

121970540
5482.995.3: RNCC: 3 | RNVC: 2

14 Sep 1983

5340-12-393-3788
Mounting Bracket

123933788
4100094-981216.000.0: RNCC: 2 | RNVC: 2
4100094-981216.000.0: RNCC: 3 | RNVC: 2

12 Sep 2013

5340-12-394-3734
Mounting Bracket

123943734
10165-183220.000.0: RNCC: 2 | RNVC: 2
10165-183220.000.0: RNCC: 3 | RNVC: 2

26 Nov 2013

5340-12-356-3689
Dust And Moisture Seal Protective Cap

123563689
108349: RNCC: 3 | RNVC: 2
1350.6,5.162.534: RNCC: 5 | RNVC: 2
54.0084.980.55: RNCC: 5 | RNVC: 9

19 Feb 2002

5340-12-336-3091
Loop Clamp

123363091
ZS1100256.004: RNCC: 3 | RNVC: 2
0086187: RNCC: 5 | RNVC: 2
0086187: RNCC: 5 | RNVC: 2

9 Nov 1994

5340-12-327-2930
Angle Bracket

123272930
4618800137: RNCC: 3 | RNVC: 2

7 Jan 1992

5340-12-383-2710
Mending Plate

123832710
388397: RNCC: 3 | RNVC: 2

30 Sep 2010

5340-12-325-0805
Spring Loaded Cylinder Fastener

123250805
8600100 A: RNCC: 3 | RNVC: 2
8600100 A: RNCC: 5 | RNVC: 9

30 Apr 1991

5340-12-320-9794
Metal Runner

123209794
702-712000-924-0: RNCC: 3 | RNVC: 2

13 Mar 1990

5340-12-135-6814

5340-12-193-3117
Nonmetallic Bumper

121933117
1164661282: RNCC: 3 | RNVC: 2

12 Jul 1982

5340-12-303-9299
Flush Lock

123039299
191827505: RNCC: 3 | RNVC: 9

21 May 1985

5340-12-151-8867
Spring Tension Clip

121518867
0009840461: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-356-1877
Webbing Strap

123561877
80303630: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-348-9811
Access Cover

123489811
C1000226: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-357-4626
Retaining Strap

123574626
N10310001: RNCC: 3 | RNVC: 9

24 Jun 2002

5340-12-337-7074
Cushioning Pad

123377074
55762S0101: RNCC: 3 | RNVC: 2

30 Mar 1995

5340-12-193-6640
Handle Grip

121936640
297.307: RNCC: 3 | RNVC: 2

18 Aug 1982

5340-12-381-6706
Access Cover

123816706
311104003H: RNCC: 3 | RNVC: 2

16 Mar 2010

5340-12-342-2093
Loop Clamp

123422093
8211 000: RNCC: 3 | RNVC: 2
8211.000: RNCC: 5 | RNVC: 2
RP 13: RNCC: 5 | RNVC: 2

7 Jan 1997

5340-12-312-7270
Door Holder

123127270
0007200416: RNCC: 3 | RNVC: 2
000 720 04 16: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-349-3871
Access Cover

123493871
592601-9018.000: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-12-192-0909
Electrical-Mechanical Equipment Post

121920909
SW4080T028: RNCC: 3 | RNVC: 2
SW4080T028: RNCC: 5 | RNVC: 9

23 Mar 1982

5340-12-702-4462
Metal Grille

127024462
VG95211-ML-127024462: RNCC: 2 | RNVC: 2
5.51.0240.0170.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-371-3270
Flush Lock

123713270
8806-N-BL31-31: RNCC: 3 | RNVC: 2

15 Mar 2007

5340-12-384-1399
Detent Plunger

123841399
598102-189820.002.0: RNCC: 3 | RNVC: 2

26 Jan 2011

5340-12-352-1308
Mending Plate

123521308
DIN3015-Z-AP-3-W1: RNCC: 2 | RNVC: 2
SP3D: RNCC: 3 | RNVC: 2

18 Oct 2000

5340-12-337-7267
Mounting Plate

123377267
2300231-223000.001.0: RNCC: 2 | RNVC: 2
2300231-223000.001.0: RNCC: 3 | RNVC: 2

4 Apr 1995

5340-12-330-9174
Access Cover

123309174
2718-000400.000.0: RNCC: 2 | RNVC: 2
2718-000400.000.0: RNCC: 3 | RNVC: 2

25 Feb 1993

5340-12-336-9748
Loop Clamp

123369748
81974200026: RNCC: 3 | RNVC: 2
81.97420-0026: RNCC: 5 | RNVC: 2
DIN71555-80,5-A4C: RNCC: 5 | RNVC: 2

4 Jan 1995

5340-12-308-0975
Electrical-Mechanical Equipment Post

123080975
VG95148C7XM4X35,7-NRST: RNCC: 2 | RNVC: 2
VG95148C7XM4X35,7-NRST: RNCC: 3 | RNVC: 2
KMS013-212000.005.0: RNCC: 3 | RNVC: 2

2 Sep 1986

5340-12-187-7394
Retaining Strap

121877394
5561752/4: RNCC: 3 | RNVC: 2
5561752-4: RNCC: 5 | RNVC: 2

4 May 1981

5340-12-305-3786
Dust And Moisture Seal Protective Plug

123053786
P-730002-405-32H-001-157M: RNCC: 3 | RNVC: 2

29 Oct 1985

5340-12-321-3309
Mounting Plate

123213309
A 4.054-00.33NW80.01.00/1POS9: RNCC: 3 | RNVC: 9

4 May 1990

5340-12-340-0889
Loop Clamp

123400889
V6530-00003-050: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-324-7667
Catch Strike

123247667
DIN3133-K15X45ZN5: RNCC: 2 | RNVC: 2
541GZ-15X45: RNCC: 3 | RNVC: 2

22 Mar 1991

5340-12-167-3329
Rod End Connector

121673329
DIN82006-C0,6-M16: RNCC: 2 | RNVC: 2
LANGAUGE-DIN82006-C0.6-ROH: RNCC: 3 | RNVC: 2
C06M16DIN82006: RNCC: 5 | RNVC: 2
C0,6-M16DIN82004: RNCC: 5 | RNVC: 2

14 Dec 1976

5340-12-326-0365
Loop Clamp

123260365
DIN3016-1-E1-20X25-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E1-20X25-W1-2: RNCC: 3 | RNVC: 2
RSGU0.20/25-W1: RNCC: 3 | RNVC: 2
RSGU0.20/25: RNCC: 5 | RNVC: 2
DIN3016-E1-20X25W1-2: RNCC: 5 | RNVC: 9
DIN3016-E1-20X25-W1-2: RNCC: 5 | RNVC: 9
DIN3016-E1-20X25W1-2: RNCC: 5 | RNVC: 9

1 Aug 1991

5340-12-321-4888
Mending Plate

123214888
702-237940-905-0: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-340-1173
Handle Grip

123401173
GN598.5-KU-26: RNCC: 3 | RNVC: 2
GN598.5-KU-26NRST: RNCC: 5 | RNVC: 9

28 Feb 1996

5340-12-337-1398
Spacing Threaded Standoff

123371398
VG95148B5XM2,5X33,5-NRST: RNCC: 2 | RNVC: 2
VG95148-B5XM2,5X33,5-NRST: RNCC: 3 | RNVC: 2
52.0271.390.04: RNCC: 3 | RNVC: 2

24 Jan 1995

5340-12-356-9823
Mounting Bracket

123569823
2300223-180140.00.0: RNCC: 2 | RNVC: 2
2300223-180140.00.0: RNCC: 3 | RNVC: 2
2300223-180140-00-0: RNCC: 5 | RNVC: 9

23 Apr 2002

5340-12-300-2645
Angle Bracket

123002645
23176-262140.03.0: RNCC: 2 | RNVC: 2
23176-262140.03.0: RNCC: 5 | RNVC: 2
23176-262140-03-0: RNCC: 5 | RNVC: 9

19 Jul 1984

5340-12-186-9987
Webbing Strap

121869987
5801796-141000.02: RNCC: 2 | RNVC: 2
431271224650: RNCC: 3 | RNVC: 2
43127122465: RNCC: 5 | RNVC: 2
5801796-141000.02: RNCC: 5 | RNVC: 9
5801796-141000-02: RNCC: 5 | RNVC: 9

25 Feb 1981

5340-12-327-8239
Mending Plate

123278239
C42080-A34-C50: RNCC: 2 | RNVC: 2
C42080-A34-C50: RNCC: 3 | RNVC: 2

10 Mar 1992

5340-12-702-2190
Angle Bracket

127022190
VG95211-ML-127022190: RNCC: 2 | RNVC: 2
30.7225.59: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-186-7454
Retaining Strap

121867454
5802206-126000-002: RNCC: 2 | RNVC: 2
535.2891: RNCC: 3 | RNVC: 2
5352891: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-328-9199
Nonmetallic Bumper

123289199
1120-61701.55: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-333-3664
Runner

123333664
42633: RNCC: 3 | RNVC: 2

7 Dec 1993

5340-12-179-1096
Sicherheits Schlosz

121791096
19400000090: RNCC: 3 | RNVC: 2
4067205135: RNCC: 5 | RNVC: 2
4067205135: RNCC: 5 | RNVC: 2

6 Jun 1979

5340-12-177-5924

5340-12-025-5870

5340-12-302-6330
Angle Bracket

123026330
1-2651-8-3: RNCC: 2 | RNVC: 2
1-2651-8-3: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-333-4897
Nonmetallic Bumper

123334897
897 030 171 4: RNCC: 3 | RNVC: 2
000 353 02 50: RNCC: 5 | RNVC: 2
0003530250: RNCC: 5 | RNVC: 2
00299701093: RNCC: 5 | RNVC: 2

22 Dec 1993

5340-12-393-0226
Mounting Bracket

123930226
1030124-260010.000.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-325-0685
Angle Bracket

123250685
702-753010-906-0: RNCC: 3 | RNVC: 2

29 Apr 1991

5340-12-380-2821
Mechanic Equipment Hardware Kit

123802821
3-0670.9970.00 C: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-12-320-7120
Mounting Bracket

123207120
9000 2535: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-383-1218
Mounting Bracket

123831218
312762: RNCC: 3 | RNVC: 2

15 Sep 2010

5340-12-345-5845
Angle Bracket

123455845
54.0053.698.00: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-393-1958
Helical Compression Spring Seat

123931958
07.0815: RNCC: 3 | RNVC: 2

16 Aug 2013

5340-12-323-0342
Mounting Bracket

123230342
32.4600.2222: RNCC: 3 | RNVC: 2
1627996: RNCC: 5 | RNVC: 2
48.4652.01.24: RNCC: 5 | RNVC: 2

18 Oct 1990

5340-12-324-1323
Mending Plate

123241323
8476468: RNCC: 3 | RNVC: 2
0018633: RNCC: 5 | RNVC: 2

23 Jan 1991

5340-12-373-6107
Angle Bracket

123736107
8802371840: RNCC: 3 | RNVC: 2

21 Nov 2007

5340-12-367-9405
Fuehrungs- Schiene

123679405
81326410019: RNCC: 3 | RNVC: 2

8 Nov 2005

5340-12-174-0365
Dust And Moisture Seal Protective Cap

121740365
E24287: RNCC: 3 | RNVC: 2

31 May 1978

5340-12-134-8167

5340-12-094-4303

5340-12-352-6618
Angle Bracket

123526618
1215 7658: RNCC: 3 | RNVC: 2

5 Dec 2000

5340-12-329-8427
Mounting Plate

123298427
151-140000-908-0: RNCC: 3 | RNVC: 2

6 Oct 1992

5340-12-390-0903
Retaining Band

123900903
2300559-185302.000.0: RNCC: 2 | RNVC: 2
2300559-185302.000.0: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-12-352-5063
Lock-Release Lever

123525063
GN300-45-M6-25-SW: RNCC: 3 | RNVC: 2

23 Nov 2000

5340-12-306-3491
Dust And Moisture Seal Protective Cap

123063491
VG95211-ML-123063491: RNCC: 2 | RNVC: 2
C200ZZ18511-000: RNCC: 3 | RNVC: 2

20 Feb 1986

5340-12-377-9611
Mounting Bracket

123779611
320.001-001: RNCC: 3 | RNVC: 2

2 Mar 2009

5340-12-382-7110
Bow Handle

123827110
GN565-26-112-SW: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-12-311-9856
Nonmetallic Bumper

123119856
4750245-050.02: RNCC: 3 | RNVC: 2

6 Nov 1987

5340-12-366-5076
Loop Clamp

123665076
76000006: RNCC: 3 | RNVC: 2
2166 4130-120: RNCC: 5 | RNVC: 2

2 May 2005

5340-12-320-5996
Strap Hinge Leaf

123205996
100330-0514.00: RNCC: 2 | RNVC: 2
1096991: RNCC: 3 | RNVC: 2
100330-0514.00: RNCC: 5 | RNVC: 9
1096991: RNCC: 5 | RNVC: 9

30 Jan 1990

5340-12-301-7359
Mending Plate

123017359
SK400-130031.000.0: RNCC: 3 | RNVC: 2
SK400-130031-000-0: RNCC: 5 | RNVC: 2
MMD 7359: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-305-8366
Schlosz Schluessel

123058366
609A069/1023: RNCC: 3 | RNVC: 2
C 3759 106: RNCC: 3 | RNVC: 2
C 3759 106: RNCC: 5 | RNVC: 2

20 Dec 1985

5340-12-196-9975
Webbing Strap

121969975
4900059-212071.000.0: RNCC: 2 | RNVC: 2
01803-2-SCHLAUFE-FE610-LE1250MM: RNCC: 3 | RNVC: 2
4900059-212071.000.0: RNCC: 3 | RNVC: 2
4900059-212071.000.0: RNCC: 3 | RNVC: 2
4900059-212071.000.0: RNCC: 3 | RNVC: 2
4900059-212071.000.0: RNCC: 3 | RNVC: 2
79016/SCHLAUFE-1860-610: RNCC: 3 | RNVC: 2
4900059-212071-000-0: RNCC: 5 | RNVC: 2
DIN60060-2-50X610X1250-C1/SCHLAU: RNCC: 5 | RNVC: 9
4900059-212071.000.0: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-342-0119
Spring Tension Clip

123420119
07.4110-001.1/00: RNCC: 3 | RNVC: 2
07-4110-0011: RNCC: 5 | RNVC: 2
07/4110-001.1: RNCC: 5 | RNVC: 2

29 Nov 1996

5340-12-305-8364
Schlosz Schluessel

123058364
609A069/1021: RNCC: 3 | RNVC: 2
C 3759 104: RNCC: 3 | RNVC: 2
C 3759 104: RNCC: 5 | RNVC: 2

20 Dec 1985

5340-12-318-8690
Cane Bolt

123188690
702-713100-001-0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-152-7806
Retaining Band

121527806
VG75073-B60: RNCC: 2 | RNVC: 2
VG75073-B60: RNCC: 3 | RNVC: 2
B60VG75073: RNCC: 5 | RNVC: 2
999852060200: RNCC: 5 | RNVC: 2
3781150: RNCC: 5 | RNVC: 2
B60VDA75073: RNCC: 5 | RNVC: 9
B60VG75073: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-314-2048
Mounting Bracket

123142048
272.1765.21-06: RNCC: 2 | RNVC: 2
272.1765.21-06: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-12-394-1485
Access Cover

123941485
11.07051-0108: RNCC: 3 | RNVC: 2
11.07051-0108: RNCC: 5 | RNVC: 2

7 Nov 2013

5340-12-137-5156
Expansion Shield

121375156
N6/35: RNCC: 3 | RNVC: 2
005: RNCC: 5 | RNVC: 2
N6-35: RNCC: 5 | RNVC: 2
N5X35: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-344-8983
Webbing Strap

123448983
4617780276/6108: RNCC: 3 | RNVC: 2
4617780276/6108: RNCC: 5 | RNVC: 2
4617780276/6108: RNCC: 5 | RNVC: 2

8 Jan 1998

5340-12-363-5216
Padlock

123635216
160/40C: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-340-5468
Mounting Bracket

123405468
5905500040: RNCC: 3 | RNVC: 2
5905500040: RNCC: 5 | RNVC: 2
5905500040: RNCC: 5 | RNVC: 2
590 550 00 40: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-190-3078
Helical Compression Spring Seat

121903078
FP01.133: RNCC: 3 | RNVC: 2
FP01133: RNCC: 5 | RNVC: 2

19 Nov 1981

5340-12-302-0952
Double Angle Bracket

123020952
068130142A: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-12-392-3598
Latch Bar

123923598
7000149: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-387-5691
Mounting Plate

123875691
BD9102T934: RNCC: 3 | RNVC: 2

10 Jan 2012

5340-12-353-8739
Manual Control Lever

123538739
4505896U02: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-363-3648
Dust And Moisture Seal Protective Cover

123633648
6121590085: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-12-168-1603
Retaining Strap

121681603
WW410257A: RNCC: 3 | RNVC: 2
WW410257A: RNCC: 5 | RNVC: 2
WW 410 257 A: RNCC: 5 | RNVC: 2
WW410257A: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-379-0707
Loop Clamp

123790707
DIN3016-1-E2-15-48X25-W1-2-NBR: RNCC: 2 | RNVC: 2

19 Jun 2009

5340-12-386-2586
Access Cover

123862586
2500261-063650.000.0: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-12-701-8127
Pawl Fastener

127018127
VG95211-ML-127018127: RNCC: 2 | RNVC: 2
5.12.9201.0520.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-345-9290
Dust And Moisture Seal Protective Cap

123459290
81964100552: RNCC: 3 | RNVC: 2
81.96410-0552: RNCC: 5 | RNVC: 2

18 May 1998

5340-12-366-9123
Mounting Bracket

123669123
7997027-202130.000.0: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-308-2941
Angle Bracket

123082941
P-875451-001: RNCC: 3 | RNVC: 2
P875451-001: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-387-8238
Mounting Bracket

123878238
SZF-705-JK-001: RNCC: 2 | RNVC: 2
SZF-705-JK-001: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-12-381-0842
Pad Eye

123810842
6623150461: RNCC: 3 | RNVC: 2

8 Jan 2010

5340-12-340-9894
Angle Bracket

123409894
20-5120-626: RNCC: 3 | RNVC: 2

12 Jul 1996

5340-12-345-8820
Latch Bar

123458820
372891: RNCC: 3 | RNVC: 2

11 May 1998

5340-12-322-3937
Nonmetallic Bumper

123223937
54.3050.000.15: RNCC: 2 | RNVC: 2
54.3050.000.15: RNCC: 3 | RNVC: 2

17 Aug 1990

5340-12-348-6372
Retaining Strap

123486372
105-80052.71: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-12-144-8671
An Scharnierlappen

5340-12-146-4971
Leder- Riemen

5340-12-199-8444
Double Angle Bracket

121998444
5801998-640013.01: RNCC: 2 | RNVC: 2
5801998-640013.01: RNCC: 3 | RNVC: 2

6 Jun 1984

5340-12-198-4218
Shimmy Damper

121984218
N00A0900510100A: RNCC: 3 | RNVC: 2
N00A0900510100A: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-329-4801
Nonmetallic Bumper

123294801
A-616776-013: RNCC: 3 | RNVC: 2
A616776-013: RNCC: 5 | RNVC: 2

22 Aug 1992

5340-12-359-9122
Clamping Catch

123599122
2500298-192940.000.0: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-12-326-4344
Loop Clamp

123264344
DIN3015-Z-KP-2-G-15-15-PA6: RNCC: 2 | RNVC: 2
HRGZ2KP15-15PA: RNCC: 3 | RNVC: 2
RBNG-215/15: RNCC: 3 | RNVC: 2
215/15PAH: RNCC: 3 | RNVC: 2
RBNG-215/15: RNCC: 5 | RNVC: 2
DIN3015-Z-KP-2-G-15-15-PA: RNCC: 5 | RNVC: 2
DIN3015-ZKP2G-15-15PA: RNCC: 5 | RNVC: 2
1665083: RNCC: 5 | RNVC: 2
HRZ2KP15-15PA-GLATT: RNCC: 5 | RNVC: 2
1665083: RNCC: 5 | RNVC: 2

16 Sep 1991

5340-12-324-6320
Webbing Strap

123246320
79017/026-0800-0160: RNCC: 3 | RNVC: 2
79017/026-800-160: RNCC: 3 | RNVC: 2
79017/026-0800-0160: RNCC: 5 | RNVC: 9
79017/026-800-160: RNCC: 5 | RNVC: 9

8 Mar 1991

5340-12-141-7188
Utility Resilient Mount

121417188
K1118-40: RNCC: 3 | RNVC: 9
0152-22-200-01: RNCC: 5 | RNVC: 2
0336 6412: RNCC: 5 | RNVC: 2
3366412EF0152-22: RNCC: 5 | RNVC: 2
3366412: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-140-6805
Dust And Moisture Seal Protective Cap

121406805
R20835: RNCC: 3 | RNVC: 2
4060066: RNCC: 3 | RNVC: 2
42094-05157: RNCC: 5 | RNVC: 2
4060-066: RNCC: 5 | RNVC: 2
R20835: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-307-9245
Resilient Mount

123079245
DIN95363-A30X25-NR45ST-M8X23: RNCC: 2 | RNVC: 2
1.30.25.1.45NR/ST-M8X23: RNCC: 5 | RNVC: 2
811.000.030.025.08X23.NR45.ST: RNCC: 5 | RNVC: 2
81100-30X25-M8X23.NR45.ST: RNCC: 5 | RNVC: 2
4001.1301.3: RNCC: 5 | RNVC: 2
5218163.12: RNCC: 5 | RNVC: 2
5218163/11MN45: RNCC: 5 | RNVC: 2
VG95363-A30X25-M8X23-NR45ST: RNCC: 5 | RNVC: 9
VG95363-A30X25-NR45ST-M8X23: RNCC: 5 | RNVC: 9
VG95363-A30X25X23-NR45-ST: RNCC: 5 | RNVC: 9

11 Aug 1986

5340-12-311-6190
Rod End Clevis

123116190
P-244707-724: RNCC: 3 | RNVC: 2
P244707-724: RNCC: 5 | RNVC: 2

28 Sep 1987

5340-12-174-0285
Loop Clamp

121740285
23223-150000-03-0: RNCC: 3 | RNVC: 2
23223-150000.03.0: RNCC: 3 | RNVC: 2
23223-150000-03-0: RNCC: 5 | RNVC: 9
23223-150000.03.0: RNCC: 5 | RNVC: 9

31 May 1978

5340-12-146-9107
Nut And Bolt Locking Plate

121469107
25704-190000.17.0: RNCC: 2 | RNVC: 2
25704-190000.17.0: RNCC: 3 | RNVC: 2
25704-190000-17-0: RNCC: 5 | RNVC: 2
25704-190000-17-0: RNCC: 5 | RNVC: 9
25704-190000.17.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-141-3890
Ball Socket Seat

121413890
DIN71805-A13: RNCC: 2 | RNVC: 2
DIN71805-A13: RNCC: 3 | RNVC: 2
071805013100: RNCC: 5 | RNVC: 2
A13DIN71805: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-3505
Rod End Clevis

121963505
P-855232-401: RNCC: 3 | RNVC: 2
P855232-401: RNCC: 5 | RNVC: 2

29 Jun 1983

5340-12-308-9391
Case Corner

123089391
P-244714-756: RNCC: 3 | RNVC: 2
P244714-756: RNCC: 5 | RNVC: 2

28 Nov 1986

5340-12-348-7039
Mounting Plate

123487039
704-110200-926-0: RNCC: 3 | RNVC: 2

9 Aug 1999

5340-12-349-4202
Pad Eye

123494202
VG95211-ML-123494202: RNCC: 2 | RNVC: 2
T521M0501101: RNCC: 3 | RNVC: 2

12 Nov 1999

5340-12-365-5863
Angle Bracket

123655863
J29120132-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-387-0136
Loop Clamp

123870136
05551937: RNCC: 3 | RNVC: 2
CV190421: RNCC: 5 | RNVC: 2
05551937: RNCC: 5 | RNVC: 2

26 Oct 2011

5340-12-349-6598
Barrel Bolt

123496598
2940.1303: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-12-348-0206
Spacing Threaded Standoff

123480206
54.0058.157.03: RNCC: 2 | RNVC: 2
54.0058.157.03: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-12-182-3548
Dust And Moisture Seal Protective Cap

121823548
128699: RNCC: 3 | RNVC: 2
128699: RNCC: 5 | RNVC: 2
128699NM: RNCC: 5 | RNVC: 9
128699NM: RNCC: 5 | RNVC: 9

28 Jan 1980

5340-12-325-7191
Nut And Bolt Retainer

123257191
3223530073: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-12-336-1650
Flush Lock

123361650
C26123-Z7-C6: RNCC: 3 | RNVC: 2

3 Nov 1994

5340-12-378-3936
Tee Hinge

123783936
3.50.0208.0(841): RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-142-8531
Loop Clamp

121428531
0009952244: RNCC: 3 | RNVC: 2
ZWSPGU12-15/12SKZ: RNCC: 5 | RNVC: 2
1337901012: RNCC: 5 | RNVC: 2
ZWSPGU12-15/12ZY: RNCC: 5 | RNVC: 2
103114: RNCC: 5 | RNVC: 2
ZWSPGU12-15-12ZY: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-323-7424
Webbing Strap

123237424
160-84044: RNCC: 3 | RNVC: 2
15160-84044: RNCC: 5 | RNVC: 2
160-84044: RNCC: 5 | RNVC: 9

12 Dec 1990

5340-12-701-5366
Angle Bracket

127015366
VG95211-ML-127015366: RNCC: 2 | RNVC: 2
5.12.6105.3420.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-356-6184
Blank Panel

123566184
SNP:SY-F1609E3-P: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-302-6493
Extension Drawer Slide

123026493
GM201-1589: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-339-8533
Mounting Bracket

123398533
5.042-402.0: RNCC: 3 | RNVC: 2
5.042-402: RNCC: 5 | RNVC: 9

24 Jan 1996

5340-12-301-8694
Dust And Moisture Seal Protective Plug

123018694
702732-0307.000: RNCC: 3 | RNVC: 2

14 Nov 1984

5340-12-391-5193
Nut And Bolt Head Protective Cap

123915193
000000007052: RNCC: 3 | RNVC: 2
N13018-B18X22,2-PE-LD: RNCC: 5 | RNVC: 2
000000007052: RNCC: 5 | RNVC: 2

15 Mar 2013

5340-12-387-8473
Protection Bellows

123878473
7094070: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-385-7235
Spacing Threaded Standoff

123857235
X00026634: RNCC: 3 | RNVC: 2
X00026654 TEIL X00026634: RNCC: 5 | RNVC: 2

4 Jul 2011

5340-12-300-6725
Rod End Clevis

123006725
4356157120: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-372-1268
Double Angle Bracket

123721268
105-62590.05: RNCC: 3 | RNVC: 2

20 Jun 2007

5340-12-382-3804
Bow Handle

123823804
0323187: RNCC: 3 | RNVC: 2

14 Jun 2010

5340-12-123-6829

5340-12-315-7238
Double Angle Bracket

123157238
4257511935: RNCC: 3 | RNVC: 2
425 751 19 35: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-194-4487
Metal Runner

121944487
5800256-68010: RNCC: 3 | RNVC: 2
5800256-68010: RNCC: 5 | RNVC: 9

4 Nov 1982

5340-12-334-0373
Dust And Moisture Seal Protective Cap

123340373
01TC34484: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-12-339-2650
Angle Bracket

123392650
SW8001T008: RNCC: 3 | RNVC: 2
SW8001T008: RNCC: 5 | RNVC: 9

31 Oct 1995

5340-12-343-7881
Mounting Bracket

123437881
WRYUG2115: RNCC: 3 | RNVC: 2
8404239: RNCC: 3 | RNVC: 2

28 Jul 1997

5340-12-184-5734
Spring Tension Clip

121845734
195244: RNCC: 3 | RNVC: 2
211955433A: RNCC: 5 | RNVC: 2

2 Aug 1980

5340-12-366-0365
Mounting Bracket

123660365
9436110414: RNCC: 3 | RNVC: 2

2 Mar 2005

5340-12-345-2629
Dust And Moisture Seal Protective Cover

123452629
4993011: RNCC: 3 | RNVC: 2

18 Feb 1998

5340-12-190-6847
Bow Handle

121906847
NO PRIMARY REF 12-190-6847: RNCC: 3 | RNVC: 2
25/24850.01: RNCC: 5 | RNVC: 9
6019919913: RNCC: 5 | RNVC: 9
25-24850-01: RNCC: 5 | RNVC: 9
6019 919913: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-315-6919
Helical Compression Spring Retainer

123156919
2500-319200.14: RNCC: 3 | RNVC: 2
5-555-10-2170-00: RNCC: 5 | RNVC: 2
5-555-10-2170-00: RNCC: 5 | RNVC: 2

19 Nov 1988

5340-12-359-7894
Mounting Plate

123597894
2500261-183400.002.0: RNCC: 2 | RNVC: 2
2500261-183400.002.0: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-309-1828
Angle Bracket

123091828
P-243996-756: RNCC: 3 | RNVC: 2
P243996-756: RNCC: 5 | RNVC: 2

19 Dec 1986

5340-12-701-4837
Loop Clamp

127014837
VG95211-ML-127014837: RNCC: 2 | RNVC: 2
5.12.5811.8090.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-348-7037
Mounting Plate

123487037
704-000001-936-0: RNCC: 3 | RNVC: 2

9 Aug 1999

5340-12-300-6478
Casement Fastener

123006478
2500075-197200.000.0: RNCC: 2 | RNVC: 2
2500075-197200.000.0: RNCC: 3 | RNVC: 2

21 Aug 1984

5340-12-339-0138
Webbing Strap

123390138
NO PRIMARY REF 12-339-0138: RNCC: 3 | RNVC: 2
01155-2-01422-1,05M: RNCC: 5 | RNVC: 9
01155-2-01422-FE300MM-LE750MM: RNCC: 5 | RNVC: 9
79057/029-1050-300: RNCC: 5 | RNVC: 9
DIN60060-25X300X750-C3/SCHLAUFE: RNCC: 5 | RNVC: 9
01155-2-01422-FE300-LE750: RNCC: 5 | RNVC: 9

26 Sep 1995

5340-12-312-5977
Mounting Bracket

123125977
987-111100.02.0: RNCC: 3 | RNVC: 2
987-111100.02.0: RNCC: 5 | RNVC: 9

20 Jan 1988

5340-12-391-2382
Access Cover

123912382
11.40051-0018: RNCC: 3 | RNVC: 2
400.01.011: RNCC: 5 | RNVC: 2
11400510018: RNCC: 5 | RNVC: 2

27 Feb 2013

5340-12-310-2990
Mending Plate

123102990
5801758-0800.02: RNCC: 2 | RNVC: 2
5801758-0800.02: RNCC: 3 | RNVC: 2

7 May 1987

5340-12-167-5468
Retaining Strap

121675468
3555938: RNCC: 3 | RNVC: 2
3555938: RNCC: 5 | RNVC: 2
2853-5738-00: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-163-8031
Dust And Moisture Seal Protective Cap-Plug

121638031
TL4-109: RNCC: 3 | RNVC: 2
454-0009: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-393-2610
Dust And Moisture Seal Protective Cap

123932610
250/4: RNCC: 3 | RNVC: 2
B003475: RNCC: 5 | RNVC: 2
GPN250/4JAUNE: RNCC: 5 | RNVC: 2

22 Aug 2013

5340-12-191-4257
Loop Clamp

121914257
DIN3016-1-D2-16-16X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.2X16/15: RNCC: 3 | RNVC: 2
DIN3016-D2-16-16X15-W1-2: RNCC: 3 | RNVC: 2
4219215016: RNCC: 5 | RNVC: 2
RSGU1100.2X16/15: RNCC: 5 | RNVC: 2
41822489: RNCC: 5 | RNVC: 2
DIN3016-D2-16-16X15-W1-2: RNCC: 5 | RNVC: 9

2 Feb 1982

5340-12-362-0067
Loop Clamp

123620067
DIN3016-1-D1-12X20-W1-MVQ: RNCC: 2 | RNVC: 2
0117 5860: RNCC: 3 | RNVC: 2
H3223-C12X20-ST/MVQ: RNCC: 5 | RNVC: 2

16 Dec 2003

5340-12-199-1167
Angle Bracket

121991167
P-296655-045: RNCC: 3 | RNVC: 2
P296655-045: RNCC: 5 | RNVC: 2

28 Mar 1984

5340-12-158-7106
Double Angle Bracket

121587106
23305-183000.03.0: RNCC: 2 | RNVC: 2
23305-183000.03.0: RNCC: 3 | RNVC: 2
23305-183000-03-0: RNCC: 5 | RNVC: 2
23305-183000.03.0: RNCC: 5 | RNVC: 9
23305-183000-03-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-8432
Mending Plate

123058432
33A48-0258-02012: RNCC: 3 | RNVC: 2

23 Dec 1985

5340-12-312-8918
Electrical-Mechanical Equipment Post

123128918
6100108-1770.02: RNCC: 2 | RNVC: 2
6100108-1770.02: RNCC: 3 | RNVC: 2
VG95148A12XM5X44-AL-RAL6019: RNCC: 5 | RNVC: 2
VG95148A12XM5X44-AL-RAL6019: RNCC: 5 | RNVC: 2

17 Feb 1988

5340-12-379-5928
Butt Hinge Leaf

123795928
ED41-2688-00101-045: RNCC: 3 | RNVC: 2

12 Aug 2009

5340-12-338-6274
Section Block Clamp

123386274
VG95211-ML-123386274: RNCC: 2 | RNVC: 2
VG1373-1009-102: RNCC: 3 | RNVC: 2

4 Aug 1995

5340-12-322-2965
Angle Bracket

123222965
5801789-28.003: RNCC: 2 | RNVC: 2
5801789-28.003: RNCC: 3 | RNVC: 2

9 Aug 1990

5340-12-176-6128
Clamping Catch

121766128
5801479-3100: RNCC: 2 | RNVC: 2
5801479-3100: RNCC: 3 | RNVC: 2
5801479-3100: RNCC: 3 | RNVC: 2
5801479-3100: RNCC: 5 | RNVC: 9
5801479-3100: RNCC: 5 | RNVC: 9

11 Dec 1978

5340-12-379-2360
Shimmy Damper

123792360
RU54012: RNCC: 3 | RNVC: 2

7 Jul 2009

5340-12-192-5056
Handle Grip

121925056
AMMN401: RNCC: 3 | RNVC: 2
MMN401-A: RNCC: 5 | RNVC: 2
A MMN 401: RNCC: 5 | RNVC: 2
MMN401-A: RNCC: 5 | RNVC: 2

29 Apr 1982

5340-12-044-0815

5340-12-316-9751
Mounting Plate

123169751
1821350012: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-386-4368
Butt Hinge

123864368
MU12682: RNCC: 3 | RNVC: 2

1 Sep 2011

5340-12-387-8629
Loop Clamp

123878629
0201723: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-360-2065
Loop Clamp

123602065
112APP-DP: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-123-4366
Retaining Strap

121234366
81974010074: RNCC: 3 | RNVC: 2
R5928: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-330-4230
Butt Hinge

123304230
9000 2381: RNCC: 3 | RNVC: 2

11 Dec 1992

5340-12-317-8758
Counterbalance Weight

123178758
3124111894: RNCC: 3 | RNVC: 2

22 May 1989

5340-12-365-1758
Angle Bracket

123651758
200 310 125: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-176-4912
Butt Hinge Leaf

121764912
WW 306 054 BR: RNCC: 2 | RNVC: 2
WW 306 054 BR: RNCC: 3 | RNVC: 9
WW 306 054 AR: RNCC: 5 | RNVC: 2
WW 306 054 BR: RNCC: 5 | RNVC: 2
WW306054AR: RNCC: 5 | RNVC: 2
WW306054AR: RNCC: 5 | RNVC: 9
WW 306 054 AR: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-180-1100
Double Angle Bracket

121801100
3826370014: RNCC: 3 | RNVC: 2

20 Aug 1979

5340-12-358-8182
Dust And Moisture Seal Protective Plug

123588182
646390208067: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-023-2311

5340-12-128-1085

5340-12-043-9173

5340-12-324-6658
Mounting Plate

123246658
5533701: RNCC: 3 | RNVC: 2
55337-01: RNCC: 5 | RNVC: 2

13 Mar 1991

5340-12-334-4724
Nonmetallic Bumper

123344724
6600185-202200.04: RNCC: 2 | RNVC: 2
6600185-202200.04: RNCC: 3 | RNVC: 2
6600185-202200.04: RNCC: 3 | RNVC: 2

13 May 1994

5340-12-342-5410
Dust And Moisture Seal Protective Cap

123425410
GPN800/1/2"-20UNF: RNCC: 3 | RNVC: 2
GPN 800 1/2" 20UNF: RNCC: 5 | RNVC: 2
800/1/2"-20UNF: RNCC: 5 | RNVC: 2

25 Feb 1997

5340-12-314-2786
Resilient Mount

123142786
22002-15: RNCC: 3 | RNVC: 2
22002-15: RNCC: 5 | RNVC: 9

23 Jun 1988

5340-12-322-5063
Support Hook

123225063
076-127110-909-0: RNCC: 2 | RNVC: 2
076-127110-909-0: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-184-9974
Manual Control Handle

121849974
CF4668620U: RNCC: 3 | RNVC: 2
CF 466 862 -U: RNCC: 5 | RNVC: 2
CF4668620U: RNCC: 5 | RNVC: 2
CF 466 862 -U: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-12-325-0799
Mounting Plate

123250799
702-731171-903-0: RNCC: 3 | RNVC: 2

30 Apr 1991

5340-12-366-8781
Angle Bracket

123668781
A-085033-408: RNCC: 3 | RNVC: 2

18 Jun 2005

5340-12-358-0892
Mounting Bracket

123580892
8.13.00: RNCC: 3 | RNVC: 2
8-13-00: RNCC: 5 | RNVC: 2

11 Sep 2002

5340-12-702-5476
Mounting Plate

127025476
VG95211-ML-127025476: RNCC: 2 | RNVC: 2
5.51.7211.1040.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-300-1218
Loop Clamp

123001218
700341-8008.000: RNCC: 3 | RNVC: 2
700341-8008: RNCC: 5 | RNVC: 9

5 Jul 1984

5340-12-122-2870
Nonmetallic Bumper

121222870
1365270085: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-343-1471
Mounting Plate

123431471
2944420935: RNCC: 3 | RNVC: 2

9 May 1997

5340-12-365-1150
Angle Bracket

123651150
1020781141: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-374-2493
Mechanical Stop

123742493
L521M1059219: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-185-5170
Metal Runner

121855170
5012SN: RNCC: 3 | RNVC: 2

11 Oct 1980

5340-12-308-7328
Helical Compression Spring Seat

123087328
03043402: RNCC: 3 | RNVC: 2
03043402.194: RNCC: 5 | RNVC: 9
19.07.14BB: RNCC: 5 | RNVC: 9

11 Nov 1986

5340-12-348-4602
Metal Grille

123484602
100055595: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-12-338-4116
Access Door

123384116
6521317: RNCC: 2 | RNVC: 2
6521317: RNCC: 3 | RNVC: 2
6521317: RNCC: 5 | RNVC: 2

5 Jul 1995

5340-12-197-7470
Mending Plate

121977470
3229401: RNCC: 3 | RNVC: 2

21 Nov 1983

5340-12-315-9468
Gummi- Riemen

123159468
490105: RNCC: 3 | RNVC: 2

9 Dec 1988

5340-12-193-4535
Dust And Moisture Seal Protective Cap

121934535
01TC33462: RNCC: 3 | RNVC: 2

22 Jul 1982

5340-12-303-1756
Electrical-Mechanical Equipment Post

123031756
1280505-41.002: RNCC: 3 | RNVC: 2

1 Mar 1985

5340-12-040-1304

5340-12-300-0065
Mending Plate

123000065
5801998-663210.03: RNCC: 2 | RNVC: 2
5801998-663210.03: RNCC: 3 | RNVC: 2

21 Jun 1984

5340-12-040-8205

5340-12-197-7689
Angle Bracket

121977689
A-145401-012: RNCC: 3 | RNVC: 2
A145401-012: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-347-4387
Padlock

123474387
65/40-KA401: RNCC: 3 | RNVC: 2

10 Dec 1998

5340-12-186-0352
Dust And Moisture Seal Protective Cap

121860352
23176-261032.01.0: RNCC: 2 | RNVC: 2
23176-261032-01-0: RNCC: 3 | RNVC: 2
23176-261032-01-0: RNCC: 5 | RNVC: 9
23176-261032.01.0: RNCC: 5 | RNVC: 9

25 Nov 1980

5340-12-325-8954
Metallic Bumper

123258954
6000.021.72.01.008: RNCC: 3 | RNVC: 2
2061405: RNCC: 5 | RNVC: 2
2061405: RNCC: 5 | RNVC: 2
6000.021.72.01/008: RNCC: 5 | RNVC: 2

19 Jul 1991

5340-12-354-1414
Access Cover

123541414
C42300-A154-B7-1-6: RNCC: 3 | RNVC: 2

11 Jun 2001

5340-12-700-8627
Angle Bracket

127008627
VG95211-ML-127008627: RNCC: 2 | RNVC: 2
155N1377-1: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-357-6922
Hand Crank

123576922
058203: RNCC: 3 | RNVC: 2
NLM06480-208X10: RNCC: 5 | RNVC: 2
NLM648-208X10: RNCC: 5 | RNVC: 2
06480-208X10: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-131-5615
Turnbuckle

121315615
DIN82004-B2,5-VERZINKT: RNCC: 2 | RNVC: 2
DIN82004-B2,5-ZN: RNCC: 3 | RNVC: 2
B2-5DIN82004VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-329-4612
Mending Plate

123294612
A-616776-015: RNCC: 3 | RNVC: 2
A616776-015: RNCC: 5 | RNVC: 2

21 Aug 1992

5340-12-156-2896
Friction Catch Stud

121562896
25704-193600.05.0: RNCC: 2 | RNVC: 2
25704-193600.05.0: RNCC: 3 | RNVC: 2
25704-193600-05-0: RNCC: 5 | RNVC: 2
25704-193600-05-0: RNCC: 5 | RNVC: 9
25704-193600.05.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-703-3430
Retaining Strap

127033430
VG95211-ML-127033430: RNCC: 2 | RNVC: 2
N1119-327: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-701-9910
Loop Clamp

127019910
VG95211-ML-127019910: RNCC: 2 | RNVC: 2
155N464-2: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6503
Angle Bracket

127016503
VG95211-ML-127016503: RNCC: 2 | RNVC: 2
5.12.7205.8050.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-386-1911
Access Cover

123861911
2800-193280.007.0: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-702-5502
Mounting Bracket

127025502
VG95211-ML-127025502: RNCC: 2 | RNVC: 2
5.51.7215.0006.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-301-4280
Strap Bolt

123014280
4178351: RNCC: 3 | RNVC: 2
1202-115: RNCC: 5 | RNVC: 2

13 Oct 1984

5340-12-363-6223
Loop Clamp

123636223
DIN3015-LD-1R-12-PA-W5: RNCC: 2 | RNVC: 2

9 Jul 2004

5340-12-335-2333
Mending Plate

123352333
4900349-202100.02: RNCC: 2 | RNVC: 2
4900349-202100.02: RNCC: 3 | RNVC: 2

29 Jul 1994

5340-12-188-4079
Dust And Moisture Seal Protective Plug

121884079
V18/352: RNCC: 3 | RNVC: 2
250-18: RNCC: 5 | RNVC: 2

7 Jul 1981

5340-12-306-3656
Angle Bracket

123063656
47620-001: RNCC: 3 | RNVC: 2
47 620-001: RNCC: 5 | RNVC: 9

24 Feb 1986

5340-12-162-8828
Electrical-Mechanical Equipment Post

121628828
21 547-001: RNCC: 3 | RNVC: 2
21547-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-177-5275
Electrical-Mechanical Equipment Post

121775275
5801352-5323.00: RNCC: 2 | RNVC: 2
5801352-5323.00: RNCC: 3 | RNVC: 2
5801352-5323-00: RNCC: 5 | RNVC: 2
5801352-5323-00: RNCC: 5 | RNVC: 2
5801352-5323.00: RNCC: 5 | RNVC: 9
5801352-5323-00: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-318-9254
Strap Bolt

123189254
2654-336120.01: RNCC: 2 | RNVC: 2
2654-336120.01: RNCC: 3 | RNVC: 2
679-08010200.01: RNCC: 5 | RNVC: 9
2654-336 120.01: RNCC: 5 | RNVC: 9
679-08010200.01: RNCC: 5 | RNVC: 9

25 Aug 1989

5340-12-318-9850
Double Angle Bracket

123189850
51191030096: RNCC: 3 | RNVC: 2
51.19103-0096: RNCC: 5 | RNVC: 2

29 Aug 1989

5340-12-131-5903
Turnbuckle Body

121315903
DIN1480-SPM8-ST: RNCC: 2 | RNVC: 2
SPMU-DIN1480-M8-ROH: RNCC: 3 | RNVC: 2
3300008S: RNCC: 5 | RNVC: 2
SPM8DIN1480: RNCC: 5 | RNVC: 2
BM8X110DIN1480: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-330-6351
Hand Crank

123306351
DIN469-D160X19-GT: RNCC: 2 | RNVC: 2
D160X19DIN469-GT: RNCC: 5 | RNVC: 2

20 Jan 1993

5340-12-300-7981
Double Angle Bracket

123007981
23114-4160.07: RNCC: 2 | RNVC: 2
23114-4160.07: RNCC: 3 | RNVC: 2
23114-4160-07: RNCC: 5 | RNVC: 9
23114-4160-07: RNCC: 5 | RNVC: 9
23114-4160.07: RNCC: 5 | RNVC: 9
23114-4160.07: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-179-8475
Resilient Mount

121798475
E1E 41S 77 FB: RNCC: 3 | RNVC: 2
2242028706: RNCC: 5 | RNVC: 2
E1E41S77FB: RNCC: 5 | RNVC: 2
5801598-0000-006: RNCC: 5 | RNVC: 2
VE41HDS77FB: RNCC: 5 | RNVC: 2
5801598-0000-006: RNCC: 5 | RNVC: 9
22420 28706: RNCC: 5 | RNVC: 9

3 Aug 1979

5340-12-369-2180
Spacing Threaded Standoff

123692180
D0046492-001: RNCC: 3 | RNVC: 2

6 Jun 2006

5340-12-346-7502
Access Cover

123467502
2300211-203400.000.0: RNCC: 2 | RNVC: 2
2300211-203400.000.0: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-193-3261
Rod End Connector

121933261
6008R-2300.02.0: RNCC: 3 | RNVC: 2

12 Jul 1982

5340-12-701-6489
Loop Clamp

127016489
VG95211-ML-127016489: RNCC: 2 | RNVC: 2
5.12.7204.8220.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-301-6353
Mending Plate

123016353
43712202-301: RNCC: 2 | RNVC: 2
43712202-301: RNCC: 3 | RNVC: 2
43712202-301: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-343-0934
Rod End Connector

123430934
HZ07-114: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-323-5730
Handle Grip

123235730
64417002: RNCC: 3 | RNVC: 2
421.1161-04.3: RNCC: 5 | RNVC: 2
4417/002: RNCC: 5 | RNVC: 9

7 Dec 1990

5340-12-702-4937
Mounting Bracket

127024937
VG95211-ML-127024937: RNCC: 2 | RNVC: 2
5.51.5101.1090.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-383-4860
Retaining Strap

123834860
MMN325-1/1G8-28-S235JR: RNCC: 3 | RNVC: 2
700325028200: RNCC: 5 | RNVC: 2

27 Oct 2010

5340-12-355-5340
Handwheel

123555340
2125-129540A03B: RNCC: 2 | RNVC: 2
2125-129540A03B: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-374-2668
Access Cover

123742668
3132201: RNCC: 3 | RNVC: 2

1 Feb 2008

5340-12-374-2496
Threaded Rod End

123742496
L521M3834207: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-198-5007
Metal Runner

121985007
5802017-603000.02: RNCC: 3 | RNVC: 2

2 Feb 1984

5340-12-375-3012
Retaining Strap

123753012
2317032: RNCC: 3 | RNVC: 2
231 70 32: RNCC: 5 | RNVC: 2

19 May 2008

5340-12-359-0647
Casement Fastener

123590647
628 004: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-352-2826
Access Cover

123522826
6278301: RNCC: 3 | RNVC: 2

3 Nov 2000

5340-12-356-8392
Verbindungsstueck

5340-12-301-8658
Metal Runner

123018658
01119: RNCC: 3 | RNVC: 2

14 Nov 1984

5340-12-376-4077
Angle Bracket

123764077
L023M0535 205: RNCC: 3 | RNVC: 2

25 Sep 2008

5340-12-002-1340

5340-12-343-0794
Mounting Bracket

123430794
CF 842 590 A: RNCC: 2 | RNVC: 2
CF 842 590 A: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-389-7300
Loop Clamp

123897300
012658001: RNCC: 3 | RNVC: 2
0079886378: RNCC: 5 | RNVC: 2

17 Aug 2012

5340-12-192-6548
Flare Lock Fastener

121926548
7820211630: RNCC: 3 | RNVC: 2
78202 11630: RNCC: 5 | RNVC: 9

12 May 1982

5340-12-344-0363
Mending Plate

123440363
88974800425: RNCC: 3 | RNVC: 2
88.97480.0425: RNCC: 5 | RNVC: 2

2 Sep 1997

5340-12-360-4219
Mechanic Equipment Hardware Kit

123604219
E132876: RNCC: 3 | RNVC: 2

20 May 2003

5340-12-394-3195
Loop Clamp

123943195
LN9490A6: RNCC: 2 | RNVC: 2

20 Nov 2013

5340-12-307-7042
Mending Plate

123077042
RP980917: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-328-2478
Helical Compression Spring Retainer

123282478
003103: RNCC: 3 | RNVC: 2
003103: RNCC: 5 | RNVC: 9

28 Apr 1992

5340-12-010-0877

5340-12-004-3906

5340-12-002-1337

5340-12-392-0055
Rod End Connector

123920055
SK688-192600.001.0: RNCC: 3 | RNVC: 2

25 Apr 2013

5340-12-329-7684
Mending Plate

123297684
23302-181124.05: RNCC: 2 | RNVC: 2
2106134: RNCC: 3 | RNVC: 2

25 Sep 1992

5340-12-314-5921
Angle Bracket

123145921
512214-0216.000: RNCC: 3 | RNVC: 2
512214-0216: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-12-326-8436
Webbing Strap

123268436
073-469510-000-0: RNCC: 2 | RNVC: 2
79036/026-6800-0900-RAL6031: RNCC: 3 | RNVC: 2
79036/026-6800-900-RAL6031: RNCC: 3 | RNVC: 2
073-469510-000-0: RNCC: 5 | RNVC: 2
79036/026-6800-900-RAL6031: RNCC: 5 | RNVC: 9

4 Nov 1991

5340-12-196-5531
Lock-Release Lever

121965531
C22234-A1000-C54: RNCC: 3 | RNVC: 2
C22234A1000C54: RNCC: 5 | RNVC: 2

18 Jul 1983

5340-12-701-8067
Butt Hinge

127018067
VG95211-ML-127018067: RNCC: 2 | RNVC: 2
5.12.8700.8031.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-313-5570
Metal Runner

123135570
C104-A24-C27: RNCC: 2 | RNVC: 2
C104-A24-C27: RNCC: 3 | RNVC: 2

15 Apr 1988

5340-12-183-9896
Leather Strap

121839896
02638225: RNCC: 3 | RNVC: 2
2638225KZ5505-46: RNCC: 5 | RNVC: 2

10 Jun 1980

5340-12-345-5848
Access Cover

123455848
62.7000.116.00-A001: RNCC: 2 | RNVC: 2
62.7000.116.00-A001: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-329-3106
Helical Compression Spring Seat

123293106
412637: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-12-375-4691
Loop Clamp

123754691
1520597: RNCC: 3 | RNVC: 2

5 Jun 2008

5340-12-359-3372
Loop Clamp

123593372
13901720201: RNCC: 3 | RNVC: 2

24 Jan 2003

5340-12-320-5572
Synchro Clamp

123205572
374043: RNCC: 3 | RNVC: 9

24 Jan 1990

5340-12-300-2693
Mending Plate

123002693
A11A121110431: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-338-3849
Mounting Bracket

123383849
338975: RNCC: 3 | RNVC: 2

29 Jun 1995

5340-12-369-4036
Runner

123694036
3025574: RNCC: 3 | RNVC: 2
3025.574: RNCC: 5 | RNVC: 2

29 Jun 2006

5340-12-379-9074
Dust And Moisture Seal Protective Cap

123799074
06510356: RNCC: 3 | RNVC: 2
CV168970: RNCC: 5 | RNVC: 2
06510356: RNCC: 5 | RNVC: 2

10 Sep 2009

5340-12-317-9068
Lever Bracket

123179068
1000042-193612.03: RNCC: 3 | RNVC: 2

24 May 1989

5340-12-370-5044
Extension Drawer Slide Section

123705044
65-029-21: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-12-360-1394
Spring Tension Clip

123601394
1006000012-023: RNCC: 3 | RNVC: 2
12SXN06: RNCC: 5 | RNVC: 2

9 Apr 2003

5340-12-346-6190
Mending Plate

123466190
5052-180301001: RNCC: 3 | RNVC: 2
5052-18 03 01 001: RNCC: 5 | RNVC: 2

17 Aug 1998

5340-12-170-2339
Bow Handle

121702339
VG95149A100ST-CR: RNCC: 2 | RNVC: 2
370-10-50: RNCC: 3 | RNVC: 2
TYPE370-10-50: RNCC: 5 | RNVC: 2
V22-288016-1200-04EZ4: RNCC: 5 | RNVC: 2
V22.288016.1200-04: RNCC: 5 | RNVC: 2

5 Jul 1977

5340-12-198-4131
Access Cover

121984131
29450-001: RNCC: 3 | RNVC: 2
29 450-001: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-185-3235
Mending Plate

121853235
8454867: RNCC: 3 | RNVC: 2
1105-158: RNCC: 5 | RNVC: 2
1105158: RNCC: 5 | RNVC: 2

30 Sep 1980

5340-12-185-3481
Angle Bracket

121853481
30-92101-0144: RNCC: 3 | RNVC: 2

30 Sep 1980

5340-12-334-4874
Multiple Angle Bracket

123344874
6600185-203500.02: RNCC: 2 | RNVC: 2
6600185-203500.02: RNCC: 3 | RNVC: 2

16 May 1994

5340-12-314-0547
Dust And Moisture Seal Protective Cap

123140547
980/0100: RNCC: 3 | RNVC: 2
9800100: RNCC: 5 | RNVC: 2
GPN980/9800100: RNCC: 5 | RNVC: 2

2 Jun 1988

5340-12-177-5115
Manual Control Handle

121775115
2300002-181191.000: RNCC: 2 | RNVC: 2
2300002-181191.000: RNCC: 3 | RNVC: 2
2300002-181191: RNCC: 5 | RNVC: 9
2300002-181191: RNCC: 5 | RNVC: 9
9830748: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-340-5214
Protection Bellows

123405214
V6-800: RNCC: 3 | RNVC: 2
909730551: RNCC: 5 | RNVC: 2

25 Apr 1996

5340-12-340-5778
Angle Bracket

123405778
008999: RNCC: 3 | RNVC: 2
909756101: RNCC: 5 | RNVC: 2
AFG-07-214-09-00-35: RNCC: 5 | RNVC: 9

7 May 1996

5340-12-181-5764
Retaining Strap

121815764
5800748-833.004: RNCC: 3 | RNVC: 2
5800748-833-004: RNCC: 5 | RNVC: 9
5800748-833-004: RNCC: 5 | RNVC: 9

3 Dec 1979

5340-12-378-0652
Mounting Bracket

123780652
397.021-210: RNCC: 3 | RNVC: 2

10 Mar 2009

5340-12-335-6144
Mounting Bracket

123356144
1190820: RNCC: 3 | RNVC: 2

6 Sep 1994

5340-12-353-3942
Spring Loaded Cylinder Fastener

123533942
CBD45072P06: RNCC: 3 | RNVC: 2

20 Mar 2001

5340-12-344-6678
Runner

123446678
78027 63001: RNCC: 2 | RNVC: 2
7802763001: RNCC: 3 | RNVC: 2
78027 63001: RNCC: 5 | RNVC: 9

26 Nov 1997

5340-12-388-7433
Mounting Actuator Plate

123887433
2300559-040200.000.0: RNCC: 2 | RNVC: 2
2300559-040200.000.0: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-12-363-0457
Mounting Bracket

123630457
S281M3010101: RNCC: 2 | RNVC: 2
S281M3010101: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-343-1972
Nonmetallic Bumper

123431972
1222-061: RNCC: 3 | RNVC: 2
F300 0T 017 8263: RNCC: 6 | RNVC: 9

15 May 1997

5340-12-174-8195
Angle Bracket

121748195
03435005: RNCC: 3 | RNVC: 2
3435005EE5027-27: RNCC: 5 | RNVC: 2
5177-27-05-03: RNCC: 5 | RNVC: 2
5177-27-05.03: RNCC: 5 | RNVC: 2
E5177-27-05-03: RNCC: 5 | RNVC: 2

7 Aug 1978

5340-12-393-8305
Mounting Bracket

123938305
11.07343-0116: RNCC: 3 | RNVC: 2
11.07343-0116: RNCC: 5 | RNVC: 2

15 Oct 2013

5340-12-148-7962
Resilient Mount

121487962
23114-1127.04: RNCC: 2 | RNVC: 2
0118277/11MN60: RNCC: 3 | RNVC: 2
845-23114-1127.04: RNCC: 3 | RNVC: 2
0118277.60: RNCC: 5 | RNVC: 2
23114-1127-04: RNCC: 5 | RNVC: 2
23114-1127-04: RNCC: 5 | RNVC: 9
23114-1127-04: RNCC: 5 | RNVC: 9
011827715: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-195-9059
Retaining Strap

121959059
DIN1597-19ZN: RNCC: 2 | RNVC: 2
DIN1597-19ZN: RNCC: 3 | RNVC: 2
DIN1597-19ZN: RNCC: 3 | RNVC: 2
DIN1597-19ZN: RNCC: 5 | RNVC: 2
DIN1597-19ZN: RNCC: 5 | RNVC: 2
DIN1597-19: RNCC: 5 | RNVC: 9
DIN1597-19BK: RNCC: 5 | RNVC: 9
DIN1597-19BK: RNCC: 5 | RNVC: 9
19DIN1597: RNCC: 5 | RNVC: 9
5410000019: RNCC: 5 | RNVC: 9

3 May 1983

5340-12-356-6080
Mounting Plate

123566080
160-27054-20: RNCC: 3 | RNVC: 2

15 Mar 2002

5340-12-353-7943
Swivel Caster

123537943
LH-SETH 250K-ST: RNCC: 3 | RNVC: 2
LH-SETH250K-ST: RNCC: 5 | RNVC: 2

10 May 2001

5340-12-179-1778
Mounting Bracket

121791778
5801113-1113-001: RNCC: 3 | RNVC: 2
5801113-1113.001: RNCC: 5 | RNVC: 2

15 Jun 1979

5340-12-155-5294
Butt Hinge Leaf

121555294
160-73176-02: RNCC: 3 | RNVC: 2
160-73176-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-386-4600
Caster Wheel

123864600
009-222.210-012: RNCC: 3 | RNVC: 2

2 Sep 2011

5340-12-701-2514
Mounting Bracket

127012514
VG95211-ML-127012514: RNCC: 2 | RNVC: 2
5.12.3700.3540.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-5724
Angle Bracket

127015724
VG95211-ML-127015724: RNCC: 2 | RNVC: 2
5.12.6149.0300.27: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-371-5604
Mounting Plate

123715604
2300397-187000.003.0: RNCC: 3 | RNVC: 2
1809549: RNCC: 5 | RNVC: 9

18 Apr 2007

5340-12-365-5814
Angle Bracket

123655814
J28130008-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-326-5732
Spring Tension Clip

123265732
100418-0803.05: RNCC: 2 | RNVC: 2
100418-0803.05: RNCC: 3 | RNVC: 2
100418-0803.05: RNCC: 5 | RNVC: 9

8 Oct 1991

5340-12-321-9668
Nonmetallic Bumper

123219668
279.615.744: RNCC: 3 | RNVC: 2
279.615 744: RNCC: 5 | RNVC: 2
1392253-121000.006: RNCC: 5 | RNVC: 9
279.615.744: RNCC: 5 | RNVC: 9

12 Jul 1990

5340-12-351-8769
Manual Control Lever

123518769
905.215.4: RNCC: 3 | RNVC: 2

6 Sep 2000

Load More Results