What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 27 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 27 of 178

5340-12-192-1250
Access Cover

121921250
15805-01: RNCC: 3 | RNVC: 2

24 Mar 1982

5340-12-312-0791
Retaining Strap

123120791
DIN1592-23ZN: RNCC: 2 | RNVC: 2
DIN1592-23ZN: RNCC: 3 | RNVC: 2
DIN1592-23ZN: RNCC: 3 | RNVC: 2
DIN1592-23ZN: RNCC: 5 | RNVC: 2
DIN1592-23ZN: RNCC: 5 | RNVC: 2
DIN1592-23: RNCC: 5 | RNVC: 9
DIN1592-23BK: RNCC: 5 | RNVC: 9
23DIN1592: RNCC: 5 | RNVC: 9
DIN1592-23: RNCC: 5 | RNVC: 9
DIN1592-23BK: RNCC: 5 | RNVC: 9

17 Nov 1987

5340-12-331-9016
Leather Strap

123319016
1322/11-RAL6031: RNCC: 3 | RNVC: 2
1322/11: RNCC: 5 | RNVC: 9

5 Jul 1993

5340-12-196-2815
Angle Bracket

121962815
34790-001: RNCC: 3 | RNVC: 2
34 790-001: RNCC: 5 | RNVC: 9

22 Jun 1983

5340-12-190-9563
Dust And Moisture Seal Protective Plug

121909563
V10/132: RNCC: 3 | RNVC: 2

29 Dec 1981

5340-12-193-1614
Compression Cup

121931614
N 120: RNCC: 3 | RNVC: 2
905-00120-00: RNCC: 5 | RNVC: 2
905-00120-00: RNCC: 5 | RNVC: 9
N 120: RNCC: 5 | RNVC: 9

28 Jun 1982

5340-12-350-2512
Angle Bracket

123502512
2125-114130.31B: RNCC: 2 | RNVC: 2
2125-114130.31B: RNCC: 3 | RNVC: 2

8 Mar 2000

5340-12-166-9156
Dust And Moisture Seal Protective Cap

121669156
E22 018 001: RNCC: 3 | RNVC: 2
2360-031000.11.0: RNCC: 5 | RNVC: 2
22 018 001: RNCC: 5 | RNVC: 2
225-011-005-001: RNCC: 5 | RNVC: 2
2360-031000.11.0: RNCC: 5 | RNVC: 2
600457: RNCC: 5 | RNVC: 2
2360-031000-11-0: RNCC: 5 | RNVC: 2
2360-031000.11.0: RNCC: 5 | RNVC: 2
2251151: RNCC: 5 | RNVC: 9
225-011-005-001: RNCC: 5 | RNVC: 9

29 Oct 1976

5340-12-179-0844
Mending Plate

121790844
2300109-050000.011.0: RNCC: 2 | RNVC: 2
2300109-050000.011.0: RNCC: 3 | RNVC: 2
2300109-050000-011-0: RNCC: 5 | RNVC: 9
2300109-050000.011.0: RNCC: 5 | RNVC: 9
2300109-050000-011-0: RNCC: 5 | RNVC: 9

6 Jun 1979

5340-12-340-6532
Mounting Bracket

123406532
5801984-208000.012.0: RNCC: 2 | RNVC: 2
5801984-208000.012.0: RNCC: 3 | RNVC: 2

18 May 1996

5340-12-701-6865
Mounting Bracket

127016865
VG95211-ML-127016865: RNCC: 2 | RNVC: 2
5.12.7220.2090.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-314-5680
Pawl Fastener

123145680
512213-8011.000: RNCC: 3 | RNVC: 2
512213-8011: RNCC: 5 | RNVC: 2

20 Jul 1988

5340-12-343-1444
Mounting Bracket

123431444
2654-331000.12: RNCC: 2 | RNVC: 2
2654-331000.12: RNCC: 3 | RNVC: 2
2654-331 000.12: RNCC: 5 | RNVC: 9
2654-331 000.12: RNCC: 5 | RNVC: 9
2654-331000.12: RNCC: 5 | RNVC: 9
2654-331 000.12: RNCC: 5 | RNVC: 9

9 May 1997

5340-12-146-7434

5340-12-133-3095

5340-12-368-3076
Track Stop

123683076
3527: RNCC: 3 | RNVC: 2
63380030: RNCC: 5 | RNVC: 2

15 Feb 2006

5340-12-351-7720
Section Block Clamp

123517720
JN0413CEE50: RNCC: 3 | RNVC: 2

22 Aug 2000

5340-12-177-4853
Manual Control Handle

121774853
4119880131: RNCC: 3 | RNVC: 2

1 Feb 1979

5340-12-139-4751
Retaining Strap

121394751
1205 5499: RNCC: 3 | RNVC: 2
3.415.0.977.001.4: RNCC: 5 | RNVC: 2
12055499: RNCC: 5 | RNVC: 2
26-23-119-4: RNCC: 5 | RNVC: 9
3-415-0-977-001-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-372-8203
Dust And Moisture Seal Protective Plug

123728203
18-16-90010: RNCC: 3 | RNVC: 2

24 Aug 2007

5340-12-377-5288
Runner

123775288
311702: RNCC: 3 | RNVC: 2
5281-12-10-02/37: RNCC: 5 | RNVC: 2

22 Jan 2009

5340-12-161-7273
Loop Clamp

121617273
DIN3016-1-A2-11-11X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A2-11-11X15-W1-2: RNCC: 3 | RNVC: 2
RS1.2X11/15: RNCC: 3 | RNVC: 2
4217215011: RNCC: 5 | RNVC: 2
RS1100-2X11-15: RNCC: 5 | RNVC: 2
RS1100.2X11/15: RNCC: 5 | RNVC: 2
DIN3016-A2-11-11X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-6597
Retaining Strap

123056597
VG95933ER-8-W1-BK: RNCC: 2 | RNVC: 2
1/2D8MMN325: RNCC: 3 | RNVC: 2
1-2D8MMN325: RNCC: 5 | RNVC: 2

2 Dec 1985

5340-12-703-3035
Mounting Bracket

127033035
VG95211-ML-127033035: RNCC: 2 | RNVC: 2
5.12.0400.1050.00: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-338-6482
Dust And Moisture Seal Protective Plug

123386482
710R3/8: RNCC: 3 | RNVC: 2
710R3-8G: RNCC: 5 | RNVC: 2
710R3/8: RNCC: 5 | RNVC: 2
GPN710R3-8G: RNCC: 5 | RNVC: 2
90-973-5120: RNCC: 5 | RNVC: 2
710R3-8: RNCC: 5 | RNVC: 2
GPN710-R3/8: RNCC: 5 | RNVC: 9

9 Aug 1995

5340-12-340-2542
Manual Control Handle

123402542
384 569-2: RNCC: 3 | RNVC: 2
S1993-0.1: RNCC: 5 | RNVC: 2
S1993-0.2: RNCC: 5 | RNVC: 2
526020: RNCC: 5 | RNVC: 2
526020: RNCC: 5 | RNVC: 2
GANTER ZG.S1933-0.2: RNCC: 5 | RNVC: 9

19 Mar 1996

5340-12-198-1175
Flush Lock

121981175
171837020: RNCC: 3 | RNVC: 9

21 Dec 1983

5340-12-199-1777
Nonmetallic Bumper

121991777
281407091A: RNCC: 3 | RNVC: 2

3 Apr 1984

5340-12-352-4815
Loop Clamp

123524815
R316: RNCC: 3 | RNVC: 2

21 Nov 2000

5340-12-393-3942
Access Cover

123933942
7195740: RNCC: 3 | RNVC: 2

12 Sep 2013

5340-12-146-8781
Doppelt Abg Halter

5340-12-348-9264
Mounting Bracket

123489264
245/7383-02-21-00: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-12-185-3984
Electrical-Mechanical Equipment Post

121853984
555-00-050000010: RNCC: 3 | RNVC: 2

3 Oct 1980

5340-12-131-4044
Ball Socket Seat

121314044
DIN71804-B10: RNCC: 3 | RNVC: 2
B10DIN71804: RNCC: 5 | RNVC: 9
DIN71804-B10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-351-2371
Mounting Bracket

123512371
3099-111000.06: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-12-194-8519
Dust And Moisture Seal Protective Cap

121948519
250/28: RNCC: 3 | RNVC: 2
GPN250/28: RNCC: 5 | RNVC: 2
GPN250-28: RNCC: 5 | RNVC: 9
250028000: RNCC: 5 | RNVC: 9
28GPN250: RNCC: 5 | RNVC: 9

14 Dec 1982

5340-12-158-9891
Butt Hinge

121589891
E5550-13-01-23: RNCC: 3 | RNVC: 2
5550-13-01-23: RNCC: 5 | RNVC: 2
5550-13-01.23: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-177-1332
Double Angle Bracket

121771332
5800826-161-003: RNCC: 3 | RNVC: 2
5800826-161.003: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-146-3895
Mending Plate

121463895
C30324A351C49: RNCC: 3 | RNVC: 2
C30324-A351-C49: RNCC: 5 | RNVC: 2
FGSCHRK351T49: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-191-2515
Bail Handle

121912515
2500058-110200.04: RNCC: 2 | RNVC: 2
2500058-110200.04: RNCC: 3 | RNVC: 2
2500058-110200.04: RNCC: 3 | RNVC: 2
2500058-110200.04: RNCC: 5 | RNVC: 2
2500058-110200-04: RNCC: 5 | RNVC: 9
2500058-110200.04: RNCC: 5 | RNVC: 9
2500058-110200.04: RNCC: 5 | RNVC: 9

20 Jan 1982

5340-12-345-4675
Webbing Strap

123454675
510207-10: RNCC: 3 | RNVC: 2
79034-8000: RNCC: 5 | RNVC: 2
VW/79234-8000: RNCC: 5 | RNVC: 2

20 Mar 1998

5340-12-302-5090
Rod End Clevis

123025090
18112-001-008: RNCC: 3 | RNVC: 2
18112-01-08: RNCC: 5 | RNVC: 9

9 Jan 1985

5340-12-172-0642
Catch Strike

121720642
1000078-700000.14: RNCC: 2 | RNVC: 2
1000078-700000-14: RNCC: 5 | RNVC: 2
1000078-700000-14: RNCC: 5 | RNVC: 9
1000078-700000-14: RNCC: 5 | RNVC: 9

19 Dec 1977

5340-12-307-9416
Mending Plate

123079416
5801434-512200.05: RNCC: 2 | RNVC: 2
7800542205: RNCC: 3 | RNVC: 2
78005 42205: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-192-2571
Double Angle Bracket

121922571
80002095: RNCC: 3 | RNVC: 2
80002095EZ5013-02: RNCC: 5 | RNVC: 2

5 Apr 1982

5340-12-347-7096
Dust And Moisture Seal Protective Plug

123477096
12547: RNCC: 3 | RNVC: 2
0084950001: RNCC: 5 | RNVC: 2
008495-0001: RNCC: 5 | RNVC: 9

1 Feb 1999

5340-12-198-0226
Mending Plate

121980226
P-896336-005: RNCC: 3 | RNVC: 2
P896336-005: RNCC: 5 | RNVC: 2

13 Dec 1983

5340-12-315-1082
Cane Bolt

123151082
1-2758-150-4: RNCC: 3 | RNVC: 2
1-2758-150-4: RNCC: 5 | RNVC: 9
1100 5234: RNCC: 5 | RNVC: 9
1-2758-150-4: RNCC: 5 | RNVC: 9

17 Sep 1988

5340-12-306-5078
Resilient Mount

123065078
1202-4A: RNCC: 3 | RNVC: 2
7039434: RNCC: 5 | RNVC: 2
V1202-4: RNCC: 5 | RNVC: 9

6 Mar 1986

5340-12-386-1856
Mounting Plate

123861856
1.314-201400.01: RNCC: 2 | RNVC: 2
1.314-201400.01: RNCC: 5 | RNVC: 2

15 Aug 2011

5340-12-352-9541
Spacing Threaded Standoff

123529541
VG95211-ML-123529541: RNCC: 2 | RNVC: 2
TA1H0002A: RNCC: 3 | RNVC: 2
CCCTA1H0002A: RNCC: 5 | RNVC: 9

12 Jan 2001

5340-12-155-1658
Spring Tension Clip

121551658
160-22796-16: RNCC: 3 | RNVC: 2
160-22796-16: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-336-7194
Bow Handle

123367194
4900011-0.011: RNCC: 2 | RNVC: 2
4900011-0.011: RNCC: 3 | RNVC: 2
4900011-0-011: RNCC: 5 | RNVC: 2
4900011-0.011: RNCC: 5 | RNVC: 2
4900011-0-011: RNCC: 5 | RNVC: 2
4900011-0-011: RNCC: 5 | RNVC: 9

13 Dec 1994

5340-12-185-1835
Loop Clamp

121851835
CN 400 300: RNCC: 3 | RNVC: 2
Q 314 292 203: RNCC: 3 | RNVC: 2
CN 400 300: RNCC: 3 | RNVC: 2
Q 314 292 203: RNCC: 3 | RNVC: 2
59.56.173.A: RNCC: 5 | RNVC: 2
Q314292203: RNCC: 5 | RNVC: 2
ZN314-292-203: RNCC: 5 | RNVC: 2
ZN314-292-203: RNCC: 5 | RNVC: 2
Q314292203: RNCC: 5 | RNVC: 2

18 Sep 1980

5340-12-177-2311
Electrical-Mechanical Equipment Post

121772311
5800822-0104-001: RNCC: 3 | RNVC: 2
5800822-0104.001: RNCC: 5 | RNVC: 2

22 Jan 1979

5340-12-177-0765
Nonmetallic Bumper

121770765
81418400032: RNCC: 3 | RNVC: 2

12 Jan 1979

5340-12-355-4365
Access Cover

123554365
959606301: RNCC: 3 | RNVC: 2

15 Nov 2001

5340-12-183-0545
Helical Compression Spring Retainer

121830545
0023793: RNCC: 3 | RNVC: 2
23793-40104: RNCC: 5 | RNVC: 2

15 Mar 1980

5340-12-365-3245
Webbing Strap

123653245
54.1067.484.00: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-376-9187
Spring Tension Clip

123769187
129989: RNCC: 3 | RNVC: 2

24 Nov 2008

5340-12-199-6633
Lock-Release Lever

121996633
D49.20170.50676: RNCC: 3 | RNVC: 2
078.0034: RNCC: 5 | RNVC: 2
10490780034: RNCC: 5 | RNVC: 9

19 May 1984

5340-12-354-8996
Dust And Moisture Seal Protective Plug

123548996
0209011780: RNCC: 3 | RNVC: 2
01103502 007: RNCC: 5 | RNVC: 9

4 Sep 2001

5340-12-387-5923
Mechanic Equipment Hardware Kit

123875923
5803674-660130.00: RNCC: 2 | RNVC: 2
7804238730: RNCC: 3 | RNVC: 2

12 Jan 2012

5340-12-365-8296
Retaining Clip

123658296
0003220140: RNCC: 3 | RNVC: 2

10 Feb 2005

5340-12-174-3201
Angle Bracket

121743201
81974850344: RNCC: 3 | RNVC: 2

21 Jun 1978

5340-12-392-2068
Cushioning Pad

123922068
7000133: RNCC: 3 | RNVC: 2

15 May 2013

5340-12-355-8163
Loop Clamp

123558163
EN4113S14WR: RNCC: 2 | RNVC: 2

18 Dec 2001

5340-12-301-7689
Nonmetallic Bumper

123017689
4179157: RNCC: 3 | RNVC: 2
S12B.K05.00.00.009: RNCC: 5 | RNVC: 2

8 Nov 1984

5340-12-350-5597
Nonmetallic Bumper

123505597
10063-212000.20: RNCC: 3 | RNVC: 2
10063-212000.20: RNCC: 5 | RNVC: 9

14 Apr 2000

5340-12-356-9485
Mounting Bracket

123569485
359922: RNCC: 3 | RNVC: 2
01743: RNCC: 5 | RNVC: 2

18 Apr 2002

5340-12-130-1454
Retaining Strap

121301454
1869950220: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-350-7644
Runner

123507644
49.1825.0043: RNCC: 3 | RNVC: 2

17 May 2000

5340-12-385-9143
Mounting Bracket

123859143
867011706: RNCC: 3 | RNVC: 2

20 Jul 2011

5340-12-332-6284
Lock-Release Lever

123326284
81671650041: RNCC: 2 | RNVC: 2
81671650041: RNCC: 3 | RNVC: 2
81.67165.0041: RNCC: 5 | RNVC: 2

31 Aug 1993

5340-12-304-9457
Mending Plate

123049457
4618510411: RNCC: 3 | RNVC: 2

10 Sep 1985

5340-12-042-5601

5340-12-353-0183
Dust And Moisture Seal Protective Cap

123530183
VG95211-ML-123530183: RNCC: 2 | RNVC: 2
CBD45010P01: RNCC: 3 | RNVC: 2

19 Jan 2001

5340-12-122-3300
Nonmetallic Bumper

121223300
VG95092B8X4X18X4X8-PUR60: RNCC: 2 | RNVC: 2
VG95092B8X4X18X4X8-PUR60: RNCC: 3 | RNVC: 2
0009871040: RNCC: 5 | RNVC: 2
GH264: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-304-7942
Mending Plate

123047942
NO PRIMARY REF 12-304-7942: RNCC: 3 | RNVC: 2
7113 155979: RNCC: 5 | RNVC: 9

26 Aug 1985

5340-12-359-7173
Mounting Bracket

123597173
33067-002-003: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-189-7702
Handwheel

121897702
VG85088-A-100X9-RG: RNCC: 2 | RNVC: 2
VG85088-A-100X9-RG: RNCC: 3 | RNVC: 2
VG85088-A-100X9-RG: RNCC: 3 | RNVC: 2
VG85088-A-100X9-RG: RNCC: 3 | RNVC: 9
9-45027-01-03: RNCC: 5 | RNVC: 2
A100-9VG85088RG5: RNCC: 5 | RNVC: 2
A100X9VG85088RG5: RNCC: 5 | RNVC: 2
A100X9VG85088RG5: RNCC: 5 | RNVC: 9
A100X9VG85088-RG5: RNCC: 5 | RNVC: 9
A100X9VG85088GCUSN5ZNPB: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-369-2866
Mounting Bracket

123692866
D0065647-001: RNCC: 3 | RNVC: 2

14 Jun 2006

5340-12-190-1760
Retaining Strap

121901760
536077-0743: RNCC: 3 | RNVC: 2
536077-0743: RNCC: 5 | RNVC: 9
536077-0743.000: RNCC: 5 | RNVC: 9
536077-0743: RNCC: 5 | RNVC: 9
536077-0743.000: RNCC: 5 | RNVC: 9

10 Nov 1981

5340-12-145-5175
Resilient Mount

121455175
DIN95367-B1-NR55-GG: RNCC: 2 | RNVC: 2
70000004500110: RNCC: 5 | RNVC: 2
1022303000: RNCC: 5 | RNVC: 2
33660,NR55ST: RNCC: 5 | RNVC: 2
817100-NR55.ST: RNCC: 5 | RNVC: 2
33660BSTN5590: RNCC: 5 | RNVC: 2
4500110: RNCC: 5 | RNVC: 9
VG95367-B1-NR55GG: RNCC: 5 | RNVC: 9
33660SM550: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-337-7933
Butt Hinge

123377933
1056-U12: RNCC: 3 | RNVC: 2
218-9202: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-12-702-1847
Mounting Plate

127021847
VG95211-ML-127021847: RNCC: 2 | RNVC: 2
30.7206.156: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-358-7958
Mounting Bracket

123587958
J0433105D127-001A0-002: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-702-6899
Mounting Bracket

127026899
VG95211-ML-127026899: RNCC: 2 | RNVC: 2
5.51.7240.0200.00: RNCC: 3 | RNVC: 2

25 Apr 1995

5340-12-383-9607
Clamping Catch

123839607
S80041-00: RNCC: 3 | RNVC: 2

29 Dec 2010

5340-12-123-9007
Resilient Mount

121239007
DIN95363-C100X55-M16X1,5-NR55ST: RNCC: 2 | RNVC: 2
520047-M16X1,5-NR55.ST: RNCC: 5 | RNVC: 2
81962100001: RNCC: 5 | RNVC: 2
5000255222: RNCC: 5 | RNVC: 2
00.03361-6087: RNCC: 5 | RNVC: 9
00033616087: RNCC: 5 | RNVC: 9
VG95363-C100X55-M16X1,5-NR55ST: RNCC: 5 | RNVC: 9
5000255222: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-375-9666
Expansion Shield

123759666
007670: RNCC: 3 | RNVC: 2
4000657076706: RNCC: 5 | RNVC: 2
EXA12/55GVZ: RNCC: 5 | RNVC: 2

25 Jul 2008

5340-12-317-8196
Angle Bracket

123178196
2300223-068520.06.0: RNCC: 2 | RNVC: 2
2300223-068520.06.0: RNCC: 3 | RNVC: 2

17 May 1989

5340-12-350-8243
Blank Panel

123508243
2300324-062244.000.4: RNCC: 2 | RNVC: 2
9918899: RNCC: 3 | RNVC: 2
2300324-062244.000.4: RNCC: 5 | RNVC: 2
2300324-062244.000.4: RNCC: 5 | RNVC: 9
9918899: RNCC: 5 | RNVC: 9

25 May 2000

5340-12-356-9404
Butt Hinge

123569404
027001301: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-12-358-2887
Helical Compression Spring Seat

123582887
5410160128: RNCC: 3 | RNVC: 2

8 Oct 2002

5340-12-392-5806
Mounting Plate

123925806
909624201: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-12-354-8534
Dust And Moisture Seal Protective Cover

123548534
VG95211-ML-123548534: RNCC: 2 | RNVC: 2
P-876428-008: RNCC: 3 | RNVC: 2
P876428-008: RNCC: 5 | RNVC: 2

30 Aug 2001

5340-12-347-4870
Mounting Bracket

123474870
5221.230.221.000: RNCC: 3 | RNVC: 2
5221.230.221.000: RNCC: 5 | RNVC: 2
192-1-005370: RNCC: 5 | RNVC: 2

16 Dec 1998

5340-12-198-9904
Angle Bracket

121989904
5801549-2110.016: RNCC: 3 | RNVC: 2

20 Mar 1984

5340-12-384-1416
Access P Parts Kit

123841416
Y598107-185899.000.0: RNCC: 2 | RNVC: 2
Y598107-185899.000.0: RNCC: 3 | RNVC: 2

26 Jan 2011

5340-12-404-0511

5340-12-177-7190
Webbing Strap

121777190
52-1405-125-08: RNCC: 3 | RNVC: 2

14 Feb 1979

5340-12-303-1675
Extension Drawer Slide

123031675
GC301-1412ALH: RNCC: 3 | RNVC: 2

1 Mar 1985

5340-12-357-8456
Section Block Clamp

123578456
E31621-00: RNCC: 3 | RNVC: 2

1 Aug 2002

5340-12-365-5872
Double Angle Bracket

123655872
J29120383-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-305-0503
Double Angle Bracket

123050503
5801759-320800.002: RNCC: 2 | RNVC: 2
5801759-320800.002: RNCC: 3 | RNVC: 2
5801759-320800.002: RNCC: 5 | RNVC: 9

20 Sep 1985

5340-12-367-3966
Door Handle

123673966
NO PRIMARY REF 12-367-3966: RNCC: 3 | RNVC: 2
7069355: RNCC: 5 | RNVC: 2

15 Aug 2005

5340-12-190-7150
Nonmetallic Bumper

121907150
E4-2015050: RNCC: 3 | RNVC: 2
E4-2015050: RNCC: 5 | RNVC: 9
E4-2015050: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-173-4956
Loop Clamp

121734956
PAN4263-40: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-12-191-5860
Spacing Threaded Standoff

121915860
PAN5170-08-120: RNCC: 3 | RNVC: 2

15 Feb 1982

5340-12-353-4336
Double Angle Bracket

123534336
VG95211-ML-123534336: RNCC: 2 | RNVC: 2
30.7117.85: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-12-165-3153
Dust And Moisture Seal Protective Cap

121653153
30-79501-0049: RNCC: 3 | RNVC: 2

9 Apr 1976

5340-12-124-8692
Hand Crank

121248692
35-20-01: RNCC: 3 | RNVC: 2
FP1336F: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-384-6496
Cover Retainer

123846496
2153215300005: RNCC: 3 | RNVC: 2
S000922: RNCC: 5 | RNVC: 2
5340PL0962761: RNCC: 6 | RNVC: 9

16 Mar 2011

5340-12-316-0320
Retaining Strap

123160320
135L97502: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-12-164-3068
Electrical-Mechanical Equipment Post

121643068
4030780169: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-336-2900
Angle Bracket

123362900
6100146-105000.011.0: RNCC: 2 | RNVC: 2
6100146-105000.011.0: RNCC: 3 | RNVC: 2
6100146-105000.011.0: RNCC: 5 | RNVC: 2

8 Nov 1994

5340-12-701-3341
Loop Clamp

127013341
VG95211-ML-127013341: RNCC: 2 | RNVC: 2
5.12.5105.1370.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-157-1727
Helical Compression Spring Seat

121571727
3410501003: RNCC: 3 | RNVC: 2
98-576-00-0002: RNCC: 5 | RNVC: 2
29-9-000-893-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-187-7395
Retaining Strap

121877395
5561750/4: RNCC: 3 | RNVC: 2
5561750-4: RNCC: 5 | RNVC: 2

4 May 1981

5340-12-359-4384
Loop Clamp

123594384
DIN3016-1-E1-25X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-306-6360
Butt Hinge

123066360
704-142110-902-0: RNCC: 3 | RNVC: 2
704-142110-902-0: RNCC: 5 | RNVC: 9

17 Mar 1986

5340-12-162-5385
Handle Grip

121625385
312: RNCC: 3 | RNVC: 2
8063-021: RNCC: 5 | RNVC: 2
8063021: RNCC: 5 | RNVC: 2
8430699: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-167-2402
Dust And Moisture Seal Protective Cap

121672402
520031: RNCC: 3 | RNVC: 2
61-1-65-22-4: RNCC: 5 | RNVC: 9
71701: RNCC: 5 | RNVC: 9

1 Dec 1976

5340-12-140-8629
Lenkradsicherung

121408629
SS52-0800-01-002: RNCC: 3 | RNVC: 2
9277715000: RNCC: 5 | RNVC: 2
81926110023: RNCC: 5 | RNVC: 2
2888-101: RNCC: 5 | RNVC: 2
2888101: RNCC: 5 | RNVC: 2
5167-86-08-51: RNCC: 5 | RNVC: 2
5167-86-08.51: RNCC: 5 | RNVC: 2
81.92611-0023: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-8751
Access Cover

123218751
23290-151075.000: RNCC: 2 | RNVC: 2
23290-151075.000: RNCC: 3 | RNVC: 2
23290-151075.000: RNCC: 5 | RNVC: 9
9859036: RNCC: 5 | RNVC: 9

5 Jul 1990

5340-12-313-6820
Electrical-Mechanical Equipment Post

123136820
510252-0310.000: RNCC: 3 | RNVC: 2

26 Apr 1988

5340-12-301-4343
Pad Eye

123014343
TK-BA35-5340-387: RNCC: 2 | RNVC: 2
5210263412: RNCC: 3 | RNVC: 2

13 Oct 1984

5340-12-306-0694
Mending Plate

123060694
5801984-200000.002.0: RNCC: 2 | RNVC: 2
5801984-200000.002.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-363-8173
Lock-Release Lever

123638173
J52422522-003: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-12-316-4735
Case Corner

123164735
P-050763-008: RNCC: 3 | RNVC: 2
P050763-008: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-391-7213
Access Cover

123917213
I006037TAN686A: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-12-364-2455
Mounting Plate

123642455
4053530040: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-305-4553
Angle Bracket

123054553
5802017-600270.02: RNCC: 2 | RNVC: 2
5802017-600270.02: RNCC: 3 | RNVC: 2
5802017-600270.02: RNCC: 3 | RNVC: 2

8 Nov 1985

5340-12-380-1738
Mounting Bracket

123801738
S993M2069101: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-12-307-3555
Manual Control Handle

123073555
4745574: RNCC: 3 | RNVC: 2

9 Jun 1986

5340-12-312-8511
Angle Bracket

123128511
2300013-6103.01: RNCC: 2 | RNVC: 2
2300013-6103.01: RNCC: 3 | RNVC: 2
2300013-6103.01: RNCC: 5 | RNVC: 9

12 Feb 1988

5340-12-314-4329
Mounting Bracket

123144329
3875450840: RNCC: 3 | RNVC: 2
387 545 08 40: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-391-8994
Mounting Plate

123918994
M4817091620000: RNCC: 3 | RNVC: 2

17 Apr 2013

5340-12-374-8367
Angle Bracket

123748367
L291M2001205: RNCC: 3 | RNVC: 2

31 Mar 2008

5340-12-372-7356
Mounting Bracket

123727356
11101229300: RNCC: 3 | RNVC: 2

16 Aug 2007

5340-12-372-8174
Swivel Caster

123728174
3477HUR100P62: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-12-338-8654
Dust And Moisture Seal Protective Cap

123388654
913018013103: RNCC: 3 | RNVC: 2
N13018-A13X7,1-PP: RNCC: 5 | RNVC: 2
A13X7,1N13018-PP: RNCC: 5 | RNVC: 9

1 Sep 1995

5340-12-187-6768
Nut And Bolt Locking Plate

121876768
5560512/4: RNCC: 1 | RNVC: 2
5560512/4: RNCC: 3 | RNVC: 2
5560512/4: RNCC: 5 | RNVC: 2
5560512/4B: RNCC: 5 | RNVC: 2
5560512/4C: RNCC: 5 | RNVC: 2
5560512-4: RNCC: 5 | RNVC: 9
5560512/4: RNCC: 5 | RNVC: 9

27 Apr 1981

5340-12-187-5478
Electrical-Mechanical Equipment Post

121875478
1215 9512: RNCC: 3 | RNVC: 2
12159512: RNCC: 5 | RNVC: 9
6-226-0-355-013-4: RNCC: 5 | RNVC: 9
6.226.0.355.013.4: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-141-8202

5340-12-301-5749
Mending Plate

123015749
4179283: RNCC: 3 | RNVC: 2
S12B.F01.20.00.002: RNCC: 5 | RNVC: 2

25 Oct 1984

5340-12-316-8929
Mounting Bracket

123168929
2300279-4649.01: RNCC: 2 | RNVC: 2
9873345: RNCC: 3 | RNVC: 2
2300279-4649.01: RNCC: 5 | RNVC: 2
2300279-4649.01: RNCC: 5 | RNVC: 9
9873345: RNCC: 5 | RNVC: 9

22 Feb 1989

5340-12-023-0361

5340-12-391-9963
Loop Clamp

123919963
4068265914: RNCC: 3 | RNVC: 2

24 Apr 2013

5340-12-171-7600
Mending Plate

121717600
66-3506-400-02A001: RNCC: 3 | RNVC: 2

11 Nov 1977

5340-12-394-6354
Manual Control Handle

123946354
GN302-45-M6-12-SW: RNCC: 3 | RNVC: 2

20 Dec 2013

5340-12-701-9968
Loop Clamp

127019968
VG95211-ML-127019968: RNCC: 2 | RNVC: 2
155N464-713: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-338-8016
Mounting Bracket

123388016
6700017-203310.00: RNCC: 2 | RNVC: 2
6700017-203310.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-194-0392
Bail Handle

121940392
588.70-510200-014: RNCC: 3 | RNVC: 2

27 Sep 1982

5340-12-366-4305
Angle Bracket

123664305
AFG-02B-413C-4011-01: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-12-190-6697
Webbing Strap

121906697
5801435-020130.00: RNCC: 2 | RNVC: 2
5801435-020130.00: RNCC: 3 | RNVC: 2
5801435-020130.00: RNCC: 3 | RNVC: 2
5801435-020130-00: RNCC: 5 | RNVC: 9
5801435-020130.00: RNCC: 5 | RNVC: 9
000-B2-25X2,5X350-BW-RAL6031: RNCC: 6 | RNVC: 9

8 Dec 1981

5340-12-309-7334
Retaining Band

123097334
9259251: RNCC: 3 | RNVC: 2
3202-852.01.01.300-000: RNCC: 5 | RNVC: 2

20 Feb 1987

5340-12-133-3469
Snap Hook

121333469
DIN5287-B60BK: RNCC: 2 | RNVC: 2
DIN5287-B60-ROH: RNCC: 3 | RNVC: 2
4293-60 BLANK: RNCC: 3 | RNVC: 9
B60DIN5287: RNCC: 5 | RNVC: 2
DIN5287-B60: RNCC: 5 | RNVC: 2
4293-60: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-389-1676
Bow Handle

123891676
GN 565.2-20-128-SW: RNCC: 3 | RNVC: 2

31 May 2012

5340-12-135-8312
Snap Hook

121358312
3603005033: RNCC: 3 | RNVC: 2
1651880052: RNCC: 5 | RNVC: 9
18800-50-8: RNCC: 5 | RNVC: 9
3603005033: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-7196
Angle Bracket

127017196
VG95211-ML-127017196: RNCC: 2 | RNVC: 2
5.12.7601.8386.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-320-4455
Loop Clamp

123204455
335907-0311.000: RNCC: 2 | RNVC: 2
335907-0311.000: RNCC: 3 | RNVC: 2
335907-0311.000: RNCC: 5 | RNVC: 9

16 Jan 1990

5340-12-176-3214
Loop Clamp

121763214
PAN4264-18: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-189-2933
Rod End Connector

121892933
5800359-010117-01: RNCC: 3 | RNVC: 2

16 Sep 1981

5340-12-331-9027
Strap Fastener Loop

123319027
880-RAL6031: RNCC: 3 | RNVC: 2
880: RNCC: 5 | RNVC: 9

5 Jul 1993

5340-12-178-0705
Mounting Bracket

121780705
NO PRIMARY REF 12-178-0705: RNCC: 3 | RNVC: 2
5717 140008: RNCC: 5 | RNVC: 9
5717140008: RNCC: 5 | RNVC: 9

16 Mar 1979

5340-12-301-2203
Metal Runner

123012203
5801445-30000.001: RNCC: 2 | RNVC: 2
5801445-30000.001: RNCC: 3 | RNVC: 2
5801445-30000.001: RNCC: 3 | RNVC: 2
5801445-30000.001: RNCC: 5 | RNVC: 9
5801445-30000.001: RNCC: 5 | RNVC: 9

28 Sep 1984

5340-12-340-0845
Spacing Threaded Standoff

123400845
2W132D002-2000.06: RNCC: 2 | RNVC: 2
2W132D002-2000.06: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-300-4885
Angle Bracket

123004885
5801357-5150.01: RNCC: 2 | RNVC: 2
5801357-5150.01: RNCC: 3 | RNVC: 2
5801357-5150.01: RNCC: 5 | RNVC: 9

7 Aug 1984

5340-12-372-9269
Mounting Bracket

123729269
NO PRIMARY REF 12-372-9269: RNCC: 3 | RNVC: 2
7092154: RNCC: 5 | RNVC: 2

7 Sep 2007

5340-12-355-0127
Shimmy Damper

123550127
88437040002: RNCC: 3 | RNVC: 2
88.43704-0002: RNCC: 5 | RNVC: 2

20 Sep 2001

5340-12-406-4587
Prop Rod

5340-12-187-8730
Double Angle Bracket

121878730
2300109-970400.076.0: RNCC: 2 | RNVC: 2
2300109-970400.076.0: RNCC: 3 | RNVC: 2
2300109-970400.076.0: RNCC: 3 | RNVC: 2
2300109-970400-076-0: RNCC: 5 | RNVC: 2
2300109-970400-076-0: RNCC: 5 | RNVC: 2
2300109-970400-076-0: RNCC: 5 | RNVC: 9
2300109-970400.076.0: RNCC: 5 | RNVC: 9

18 May 1981

5340-12-359-9600
Loop Clamp

123599600
00445048: RNCC: 3 | RNVC: 2
HYRAC 223-230ST: RNCC: 5 | RNVC: 2

25 Mar 2003

5340-12-310-9508
Angle Bracket

123109508
4900189-430000.02: RNCC: 2 | RNVC: 2
4900189-430000.02: RNCC: 3 | RNVC: 2

13 Jul 1987

5340-12-349-4296
Dust And Moisture Seal Protective Cap

123494296
GTK-00149: RNCC: 3 | RNVC: 2

15 Nov 1999

5340-12-361-4884
Expansion Plug

123614884
51916060065: RNCC: 3 | RNVC: 2
51.91606-0065: RNCC: 5 | RNVC: 2

8 Oct 2003

5340-12-333-2644
Mounting Bracket

123332644
LB-IV/2-40E01-37: RNCC: 2 | RNVC: 2

16 Nov 1993

5340-12-172-2780
Spring Tension Clip

121722780
2360-261140.03.0: RNCC: 2 | RNVC: 2
2360-261140.03.0: RNCC: 3 | RNVC: 2
2360-261140-03-0: RNCC: 5 | RNVC: 2
2360-261140.03.0: RNCC: 5 | RNVC: 2
2360-261140-03-0: RNCC: 5 | RNVC: 2
2360-261140-03-0: RNCC: 5 | RNVC: 9
2360-261140.03.0: RNCC: 5 | RNVC: 9

10 Jan 1978

5340-12-361-6809
Mounting Bracket

123616809
70.1120.160-00: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-146-8937
Nut And Bolt Locking Plate

121468937
2360-182120.01.0: RNCC: 2 | RNVC: 2
2360-182120-01-0: RNCC: 5 | RNVC: 2
2360-182120.01.0: RNCC: 5 | RNVC: 2
2360-182120.01.0: RNCC: 5 | RNVC: 2
2360-182120-01-0: RNCC: 5 | RNVC: 9
2360-182120.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-346-2436
Loop Clamp

123462436
1201 7972: RNCC: 3 | RNVC: 2
A26.658-041/2.4: RNCC: 5 | RNVC: 9

2 Jul 1998

5340-12-162-5067
Strap Fastener Loop

121625067
5801369-0800-003: RNCC: 2 | RNVC: 2
3413024014: RNCC: 5 | RNVC: 2
34130 24014: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-354-1446
Dust And Moisture Seal Protective Cap

123541446
E32319-00: RNCC: 3 | RNVC: 2

11 Jun 2001

5340-12-373-8777
Rod End Connector

123738777
2300436-970110.002.0: RNCC: 3 | RNVC: 2
1721172: RNCC: 5 | RNVC: 2

14 Dec 2007

5340-12-337-2419
Double Angle Bracket

123372419
2300109-970181.001.0: RNCC: 3 | RNVC: 2
1224110: RNCC: 5 | RNVC: 9

7 Feb 1995

5340-12-311-1741
Swivel Caster

123111741
2477DIK100S70: RNCC: 3 | RNVC: 2
5.031.053.0: RNCC: 5 | RNVC: 2

4 Aug 1987

5340-12-357-9162
Dust And Moisture Seal Protective Cover

123579162
2300042-255160.000: RNCC: 2 | RNVC: 2
2300042-255160.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-360-7061
Nonmetallic Bumper

123607061
0009886811: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-365-6400
Spring Tension Clip

123656400
16596: RNCC: 3 | RNVC: 2
0089888478: RNCC: 5 | RNVC: 2

20 Jan 2005

5340-12-365-0700
Double Angle Bracket

123650700
4616800012: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-199-2307
Retaining Strap

121992307
114M80009: RNCC: 3 | RNVC: 2

5 Apr 1984

5340-12-094-1125

5340-12-387-8250
Pipe Hanger

123878250
X59418400002: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-12-092-3125

5340-12-701-7012
Mounting Plate

127017012
VG95211-ML-127017012: RNCC: 2 | RNVC: 2
5.12.7240.0101.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-192-2906
Resilient Mount

121922906
E1FH 76-01: RNCC: 3 | RNVC: 2
5L.3688.001.02: RNCC: 5 | RNVC: 2
E1FH76-01: RNCC: 5 | RNVC: 2
106114: RNCC: 5 | RNVC: 2

7 Apr 1982

5340-12-701-9480
Rod End Clevis

127019480
VG95211-ML-127019480: RNCC: 2 | RNVC: 2
5.12.5111.0190.00: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-325-8001
Nonmetallic Bumper

123258001
5801984-980900.013.0: RNCC: 2 | RNVC: 2
PLATTE40X40X5MM.NR60: RNCC: 3 | RNVC: 2
5801984-980900.013.0: RNCC: 5 | RNVC: 2

11 Jul 1991

5340-12-349-8197
Dust And Moisture Seal Protective Cap

123498197
32 71 1 459 318: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-389-0571
Manual Control Lever

123890571
Z=10059: RNCC: 3 | RNVC: 2

23 May 2012

5340-12-328-8932
Angle Bracket

123288932
2300232-820660.000.0: RNCC: 2 | RNVC: 2
2300232-820660.000.0: RNCC: 3 | RNVC: 2

30 Jun 1992

5340-12-175-6987
Electrical-Mechanical Equipment Post

121756987
CF 420 511 B: RNCC: 2 | RNVC: 2
CF 420 511 B: RNCC: 3 | RNVC: 2
CF420511B: RNCC: 5 | RNVC: 2
CF420511B: RNCC: 5 | RNVC: 2
CF 420 511 B: RNCC: 5 | RNVC: 2
CF 420 511 B: RNCC: 5 | RNVC: 2
CF420511B: RNCC: 5 | RNVC: 2

11 Oct 1978

5340-12-192-3129
Pad Eye

121923129
42203923: RNCC: 3 | RNVC: 2
42203923KZ5511-27: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-004-0653

5340-12-392-8069
Rim Lock

123928069
237.76.610: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-12-385-5228
Mounting Bracket

123855228
F6788565: RNCC: 3 | RNVC: 2

10 Jun 2011

5340-12-190-5656
Mending Plate

121905656
8474894: RNCC: 3 | RNVC: 2
1644-894: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-183-8263
Detent Plunger

121838263
12746-007-03: RNCC: 3 | RNVC: 2

24 May 1980

5340-12-197-4063
Mending Plate

121974063
5801813-501020: RNCC: 2 | RNVC: 2
5801813-501020: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-310-6475
Angle Bracket

123106475
6250-0080.00.0: RNCC: 2 | RNVC: 2
9801045: RNCC: 3 | RNVC: 2
6250-0080.00.0: RNCC: 5 | RNVC: 9
9801045: RNCC: 5 | RNVC: 9
6250-0080.00.0: RNCC: 5 | RNVC: 9

12 Jun 1987

5340-12-306-9064
Retaining Strap

123069064
23110-0800.03: RNCC: 2 | RNVC: 2
23110-0800.03: RNCC: 3 | RNVC: 2
23110-0800.03: RNCC: 5 | RNVC: 9
23110-0800.03: RNCC: 5 | RNVC: 9

16 Apr 1986

5340-12-364-5709
Clamping Catch

123645709
V917L01-1X1BP: RNCC: 3 | RNVC: 2

9 Oct 2004

5340-12-313-3275
Mending Plate

123133275
512201-2650: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-12-380-9569
Spring Tension Clip

123809569
151-00703: RNCC: 3 | RNVC: 2
41118373 TEIL 41118378: RNCC: 5 | RNVC: 2
41118378: RNCC: 5 | RNVC: 2

16 Dec 2009

5340-12-342-0610
Mounting Bracket

123420610
1890597-10410.00: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-12-337-6799
Access Cover

123376799
E5074-403-20: RNCC: 3 | RNVC: 2

27 Mar 1995

5340-12-334-6445
Mounting Bracket

123346445
4900123-3000.00: RNCC: 2 | RNVC: 2
4900123-3000.00: RNCC: 3 | RNVC: 2

6 Jun 1994

5340-12-312-4526
Retaining Clip

123124526
010-24.21.926-15: RNCC: 3 | RNVC: 2
010-24.21.926-15: RNCC: 3 | RNVC: 2

8 Jan 1988

5340-12-197-9546
Electrical-Mechanical Equipment Post

121979546
VG95148B14XM6X23-NRST: RNCC: 2 | RNVC: 2
VG95148B14XM6X23-NRST: RNCC: 3 | RNVC: 2
CF 482 025: RNCC: 3 | RNVC: 2
CF 482 025: RNCC: 3 | RNVC: 2

5 Dec 1983

5340-12-702-6333
Angle Bracket

127026333
VG95211-ML-127026333: RNCC: 2 | RNVC: 2
84-6110-230: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-360-3008
Dust And Moisture Seal Protective Plug

123603008
0009626505: RNCC: 3 | RNVC: 2
0009626505: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-316-4486
Angle Bracket

123164486
P-050761-015: RNCC: 3 | RNVC: 2
P-026782-015: RNCC: 5 | RNVC: 2
P026782-015: RNCC: 5 | RNVC: 2
P050761-015: RNCC: 5 | RNVC: 2

18 Jan 1989

5340-12-331-7247
Webbing Strap

123317247
01155-1-1500MM NUTZLAENGE: RNCC: 3 | RNVC: 2
79057-1500: RNCC: 3 | RNVC: 2
01155-1-1,5M: RNCC: 5 | RNVC: 2
01155-1 L=1500: RNCC: 5 | RNVC: 2
01155-1-1,5M NUTZLAENGE: RNCC: 5 | RNVC: 2
01155-1-1500: RNCC: 5 | RNVC: 2
01155-1-1500MM: RNCC: 5 | RNVC: 2
DIN60060-1-25X1500-C3: RNCC: 5 | RNVC: 9

15 Jun 1993

5340-12-186-3055
Retaining Clip

121863055
E6/12-5/07: RNCC: 3 | RNVC: 2
06678300211: RNCC: 5 | RNVC: 2
E6-12-5-07: RNCC: 5 | RNVC: 2

13 Dec 1980

5340-12-351-7763
Retaining Strap

123517763
N/W/100-304/4+7: RNCC: 3 | RNVC: 2

22 Aug 2000

5340-12-179-6298
Spring Tension Clip

121796298
SC05103K: RNCC: 3 | RNVC: 2
0005460875: RNCC: 5 | RNVC: 2

13 Jul 1979

5340-12-315-4774
Mounting Bracket

123154774
100314-1410: RNCC: 3 | RNVC: 2
100314-1410: RNCC: 5 | RNVC: 9

27 Oct 1988

5340-12-020-7572

5340-12-307-6630
Loop Clamp

123076630
LN9490BK20: RNCC: 2 | RNVC: 2

14 Jul 1986

5340-12-159-7038
Loop Clamp

121597038
4049950201: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-383-3983
Bumper

123833983
136787-9: RNCC: 3 | RNVC: 2

15 Oct 2010

5340-12-151-8471
Handle Grip

121518471
23111-1805.04: RNCC: 1 | RNVC: 2
852-10.34: RNCC: 3 | RNVC: 2
23111-1805.04: RNCC: 5 | RNVC: 2
23111-1805-04: RNCC: 5 | RNVC: 2
23111-1805-04: RNCC: 5 | RNVC: 9
23111-1805-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-158-3134
Bow Handle

121583134
10501-007: RNCC: 3 | RNVC: 2
0765112: RNCC: 5 | RNVC: 2
5L3731-001-33: RNCC: 5 | RNVC: 2
450900-8994-007: RNCC: 5 | RNVC: 2
10501-007: RNCC: 5 | RNVC: 2
91436216: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-157-8903
Strap Hinge

121578903
25858-5300-01: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-355-5330
Mechanical Stop

123555330
2125-129100A03B: RNCC: 2 | RNVC: 2
2125-129100A03B: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-312-5908
Ball Socket Seat

123125908
615.06-04-01-03-004: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-371-5773
Angle Bracket

123715773
2300397-050000.005.0: RNCC: 3 | RNVC: 2
1812652: RNCC: 5 | RNVC: 9

19 Apr 2007

5340-12-379-9875
Mounting Plate

123799875
58180473: RNCC: 3 | RNVC: 2
58180473: RNCC: 5 | RNVC: 2
CV169135: RNCC: 5 | RNVC: 2

17 Sep 2009

5340-12-149-0926
Mending Plate

121490926
121G10019: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-374-3828
Flush Bolt

123743828
L521M3096101: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-12-349-3897
Access Cover

123493897
T524M1224101: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-12-043-3286

5340-12-184-3585
Pad Eye

121843585
5801357-1800.06: RNCC: 2 | RNVC: 2
5801357-1800.06: RNCC: 3 | RNVC: 2
5801357-1800-06: RNCC: 5 | RNVC: 2
5801357-1800-06: RNCC: 5 | RNVC: 2
5801357-1800-06: RNCC: 5 | RNVC: 9

19 Jul 1980

5340-12-371-2673
Retaining Strap

123712673
SK686-850600.026.0: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-12-168-5687
Nonmetallic Bumper

121685687
1000025-260610.10: RNCC: 2 | RNVC: 2
1000025-260610.10: RNCC: 3 | RNVC: 2
1000025-260610.10: RNCC: 3 | RNVC: 2
1000025-260610-10: RNCC: 5 | RNVC: 2
1000025-260610-10: RNCC: 5 | RNVC: 9
1000025-260610.10: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-318-0979
Butt Hinge

123180979
140-110000-908-0: RNCC: 3 | RNVC: 2

12 Jun 1989

5340-12-197-9022
Bail Handle

121979022
NO.204/100 GZ: RNCC: 3 | RNVC: 2
204/100MM GZ: RNCC: 5 | RNVC: 2
204/100MM: RNCC: 5 | RNVC: 9

1 Dec 1983

5340-12-178-9430
Door Button

121789430
DIN7463-A2-8BK: RNCC: 2 | RNVC: 2
031049: RNCC: 5 | RNVC: 2
A2-8DIN7463R0H: RNCC: 5 | RNVC: 2
A2-8DIN7463ROH: RNCC: 5 | RNVC: 2

28 May 1979

5340-12-331-9292
Webbing Strap

123319292
708-152000-901-0: RNCC: 3 | RNVC: 2
708-152000-901-0: RNCC: 5 | RNVC: 2

7 Jul 1993

5340-12-324-4122
Metal Runner

123244122
900-905420.03.0: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-12-366-4268
Mounting Bracket

123664268
2 0075-579: RNCC: 3 | RNVC: 2
2 0075-579: RNCC: 5 | RNVC: 2

25 Apr 2005

5340-12-302-5999
Mending Plate

123025999
1-2630-2-3: RNCC: 2 | RNVC: 2
1-2630-2-3: RNCC: 3 | RNVC: 2

16 Jan 1985

5340-12-184-9479
Platte

121849479
CF4634470U: RNCC: 3 | RNVC: 2
CF4634470U: RNCC: 5 | RNVC: 2
CF 463 447 -U: RNCC: 5 | RNVC: 2
CF 463 447 -U: RNCC: 5 | RNVC: 2

28 Aug 1980

5340-12-317-0546
Mounting Bracket

123170546
3603230040: RNCC: 3 | RNVC: 2

7 Mar 1989

5340-12-305-6269
Corner Brace

123056269
536D18003: RNCC: 3 | RNVC: 2

28 Nov 1985

5340-12-383-8843
Bumper

123838843
10014538: RNCC: 3 | RNVC: 2

16 Dec 2010

5340-12-316-6910
Mounting Bracket

123166910
51-53225: RNCC: 3 | RNVC: 2

2 Feb 1989

5340-12-090-5189

5340-12-198-8293
Double Angle Bracket

121988293
2300109-060000.003.0: RNCC: 2 | RNVC: 2
2300109-060000.003.0: RNCC: 3 | RNVC: 2
2300109-060000.003.0: RNCC: 3 | RNVC: 2
2300109-060000.003.0: RNCC: 5 | RNVC: 9

1 Mar 1984

5340-12-701-5992
Loop Clamp

127015992
VG95211-ML-127015992: RNCC: 2 | RNVC: 2
5.12.6501.8120.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-385-5522
Mounting Bracket

123855522
SK1331-987220.000.0: RNCC: 3 | RNVC: 2
7124022: RNCC: 5 | RNVC: 2

15 Jun 2011

5340-12-318-8581
Mending Plate

123188581
704-123000-901-0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-196-9977
Webbing Strap

121969977
4900059-212075.000.0: RNCC: 2 | RNVC: 2
01026-2-SCHLAUFE-FE600MM-LE950MM: RNCC: 3 | RNVC: 2
4900059-212075.000.0: RNCC: 3 | RNVC: 2
4900059-212075.000.0: RNCC: 3 | RNVC: 2
79018/SCHLAUFE-1450-600: RNCC: 3 | RNVC: 2
4900059-212075.000.0: RNCC: 3 | RNVC: 2
4900059-212075.000.0: RNCC: 3 | RNVC: 2
4900059-212075-000-0: RNCC: 5 | RNVC: 2
4900059-212075.000.0: RNCC: 5 | RNVC: 9
DIN60060-2-50X600X950-C5/SCHLAUF: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-311-1780
Loop Clamp

123111780
5802284-112000.02: RNCC: 2 | RNVC: 2
4312 712 61810: RNCC: 3 | RNVC: 2

4 Aug 1987

5340-12-702-6113
Loop Clamp

127026113
VG95211-ML-127026113: RNCC: 2 | RNVC: 2
5891A-32: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-190-6219
Bridge Clamp

121906219
1200037-112.020: RNCC: 3 | RNVC: 2
1200037-112-020: RNCC: 5 | RNVC: 9

7 Dec 1981

5340-12-329-1299
Metallic Solid Wheel

123291299
5.18.00531-28: RNCC: 3 | RNVC: 2
5-18-00531-28: RNCC: 5 | RNVC: 9

21 Jul 1992

5340-12-195-7228
Resilient Mount

121957228
1204110009: RNCC: 3 | RNVC: 2
UMA,453/954,OELSCHUTZ,U10: RNCC: 5 | RNVC: 2
U10 OELSCHUTZANSTRICH: RNCC: 5 | RNVC: 9
UMA,INDEX453/954OELSCHUTZ: RNCC: 5 | RNVC: 9
UMA453/954 OELSCHUTZANSTRICH: RNCC: 5 | RNVC: 9
7-637-2000-029: RNCC: 5 | RNVC: 9

5 Apr 1983

5340-12-342-7783
Access Cover

123427783
1203 0526: RNCC: 3 | RNVC: 2
3-601-0-785-003-4: RNCC: 5 | RNVC: 9
12030526EC0111-37: RNCC: 5 | RNVC: 9
3.601.0.785.003.4: RNCC: 5 | RNVC: 9

27 Mar 1997

5340-12-192-3136
Helical Compression Spring Seat

121923136
42316788: RNCC: 3 | RNVC: 2
42316788EE5620-06: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-388-1990
Mounting Bracket

123881990
1030124-060220.001.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-701-6099
Mounting Plate

127016099
VG95211-ML-127016099: RNCC: 2 | RNVC: 2
5.12.7003.8034.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-3171
Lock-Release Lever

121963171
8.316.001.015.02.00: RNCC: 3 | RNVC: 2
316.001.37.500.0969: RNCC: 5 | RNVC: 2
DFDL16-065T9C45: RNCC: 5 | RNVC: 2

27 Jun 1983

5340-12-332-4866
Runner

123324866
4T-985-13-R: RNCC: 3 | RNVC: 2
4T-985-13 SPIEGELBILDLICH: RNCC: 5 | RNVC: 2
4T-985-13 SPIEGELBILDLICH: RNCC: 5 | RNVC: 9
4T-985-13-R: RNCC: 5 | RNVC: 9

16 Aug 1993

5340-12-313-5584
Bow Handle

123135584
VG95149A112X27-M4-8-NRST: RNCC: 2 | RNVC: 2
12670-875: RNCC: 3 | RNVC: 2
KB-12670-875: RNCC: 5 | RNVC: 2

15 Apr 1988

5340-12-195-8105
Mending Plate

121958105
P-145350-078: RNCC: 3 | RNVC: 2
P145350-078: RNCC: 5 | RNVC: 2

19 Apr 1983

5340-12-302-4490
Shimmy Damper

123024490
16-4-368-300-A11-B11-900N: RNCC: 3 | RNVC: 2
16-4-895A11B11-900N: RNCC: 5 | RNVC: 2

29 Dec 1984

5340-12-196-3696
Resilient Mount

121963696
DIN95369-A5-2-M-ST: RNCC: 2 | RNVC: 2
1340403020: RNCC: 5 | RNVC: 2
151009-M16-SI.ST-50: RNCC: 5 | RNVC: 2
60-400-050 SI: RNCC: 5 | RNVC: 2
C4135,SIM16: RNCC: 5 | RNVC: 2
C4135SI: RNCC: 5 | RNVC: 9
VG95369-A5-2-MVQ-ST: RNCC: 5 | RNVC: 9
C4135SIM16: RNCC: 5 | RNVC: 9

30 Jun 1983

5340-12-148-3728
Resilient Mount

121483728
420-204-B-01.08: RNCC: 3 | RNVC: 2
83104501: RNCC: 3 | RNVC: 2
420-204B01-08: RNCC: 5 | RNVC: 2
420-204-B-01.08: RNCC: 5 | RNVC: 2
29E2-02-04-01-08: RNCC: 5 | RNVC: 2
420-204B0108: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-313-5569
Mending Plate

123135569
C104-A24-C87: RNCC: 2 | RNVC: 2
C104-A24-C87: RNCC: 3 | RNVC: 2

15 Apr 1988

5340-12-303-2652
Dust And Moisture Seal Protective Plug

123032652
P-856070-001: RNCC: 3 | RNVC: 2
P856070-001: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-312-7601
Loop Clamp

123127601
DIN3015-LC-K-2R-18-PP-W1: RNCC: 2 | RNVC: 2
HRL2C18PP STMBL: RNCC: 3 | RNVC: 2
RAPR1-218: RNCC: 3 | RNVC: 2
SP218PP-LI: RNCC: 3 | RNVC: 2
1019104: RNCC: 5 | RNVC: 2
RAPR1-218: RNCC: 5 | RNVC: 2
DIN3015-LC2R-18PP-W1-K: RNCC: 5 | RNVC: 2
SP218PPLI: RNCC: 5 | RNVC: 2
SP218PP-LI: RNCC: 5 | RNVC: 2

3 Feb 1988

5340-12-319-6479
Mounting Bracket

123196479
42052487: RNCC: 3 | RNVC: 2
42052487KZ5048-04: RNCC: 5 | RNVC: 2

20 Oct 1989

5340-12-354-8327
Double Angle Bracket

123548327
5400049-111823.02: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-301-2575
Butt Hinge Leaf

123012575
113-0425F: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-198-5451
Mending Plate

121985451
23114-0339.02: RNCC: 2 | RNVC: 2
23114-0339.02: RNCC: 3 | RNVC: 2
23114-0339-02: RNCC: 5 | RNVC: 9
23114-0339.02: RNCC: 5 | RNVC: 9
23114-0339-02: RNCC: 5 | RNVC: 9

8 Feb 1984

5340-12-190-1134
Access Cover

121901134
536078-0071: RNCC: 3 | RNVC: 2
536078-0071.000: RNCC: 5 | RNVC: 9
536078-0071: RNCC: 5 | RNVC: 9
536078-0071.000: RNCC: 5 | RNVC: 9
536078-0071: RNCC: 5 | RNVC: 9

9 Nov 1981

5340-12-165-9581
Door Button

121659581
23290-062000.001: RNCC: 2 | RNVC: 2
23290-062000-001: RNCC: 5 | RNVC: 9

23 Jul 1976

5340-12-166-9392
Resilient Mount

121669392
02491210: RNCC: 3 | RNVC: 2
02491211: RNCC: 5 | RNVC: 2
2491210KZ5015-57: RNCC: 5 | RNVC: 2
2491211UD5015-57: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-12-131-5604
Turnbuckle

121315604
DIN1480-SPM12-OESE/OESE-A3P: RNCC: 2 | RNVC: 2
SP-DIN1480-M12-OE/OE-TZN400: RNCC: 3 | RNVC: 2
4100012V: RNCC: 5 | RNVC: 2
49012OEOEJ: RNCC: 5 | RNVC: 2
SP-DIN1480-M12-OE/OE-A3P: RNCC: 5 | RNVC: 2
DIN1480-SPM12-OESEN TZN400: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-179-5960
Nonmetallic Bumper

121795960
5800826-01-013: RNCC: 3 | RNVC: 2
5800826-01.013: RNCC: 5 | RNVC: 2

11 Jul 1979

5340-12-172-2947
Headless Straight Rod

121722947
2360-014100.00.0: RNCC: 2 | RNVC: 2
1299437: RNCC: 3 | RNVC: 2
2360-014100-00-0: RNCC: 5 | RNVC: 2
2360-014100.00.0: RNCC: 5 | RNVC: 2
2360-014100.00.0: RNCC: 5 | RNVC: 2
2360-014100.00.0: RNCC: 5 | RNVC: 9
2360-014100-00-0: RNCC: 5 | RNVC: 9

10 Jan 1978

5340-12-171-7012
Electrical-Mechanical Equipment Post

121717012
VG95148B7XM4X32-3.1645.51-EQ-E1: RNCC: 2 | RNVC: 2
WN02-006: RNCC: 3 | RNVC: 2
VG95148B7XM4X32-3.1645.51-EQ-E1: RNCC: 3 | RNVC: 2

7 Nov 1977

5340-12-163-5948
Loop Clamp

121635948
DIN3016-1-A2-12-12X12-W1-2: RNCC: 2 | RNVC: 2
RS1.2X12/12: RNCC: 3 | RNVC: 2
DIN3016-A2-12-12X12-W1-2: RNCC: 3 | RNVC: 2
RS1100-2X12-12: RNCC: 5 | RNVC: 2
RS1100.2X12/12: RNCC: 5 | RNVC: 2
4217212012: RNCC: 5 | RNVC: 2
DIN3016-A2-12-12X12-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-5557
Angle Bracket

121975557
P-296837-001: RNCC: 3 | RNVC: 2
P296837-001: RNCC: 5 | RNVC: 2

2 Nov 1983

5340-12-151-3260
Resilient Mount

121513260
DIN95369-A3-1-CR-ST: RNCC: 2 | RNVC: 2
C 3695 818: RNCC: 5 | RNVC: 2
151005-M10-CR.ST-40: RNCC: 5 | RNVC: 2
60-200-040: RNCC: 5 | RNVC: 2
C2020: RNCC: 5 | RNVC: 2
352250016914: RNCC: 5 | RNVC: 2
VBE424-14: RNCC: 5 | RNVC: 2
C 3695 818: RNCC: 5 | RNVC: 2
VG95369-A3-1-CR-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-3958
Access Cover

121643958
2360-391000.01.0: RNCC: 2 | RNVC: 2
2360-391000-01-0: RNCC: 5 | RNVC: 2
2360-391000.01.0: RNCC: 5 | RNVC: 2
2360-391000-01-0: RNCC: 5 | RNVC: 2
2360-391000.01.0: RNCC: 5 | RNVC: 2
2360-391000-01-0: RNCC: 5 | RNVC: 9
2360-391000.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-388-6725
Webbing Strap

123886725
UK025/L=1200MM: RNCC: 3 | RNVC: 2

12 Apr 2012

5340-12-181-2435
Retaining Strap

121812435
2360-120000.38.0: RNCC: 2 | RNVC: 2
2360-120000.38.0: RNCC: 3 | RNVC: 2
2360-120000-38-0: RNCC: 5 | RNVC: 2
2360-120000.38.0: RNCC: 5 | RNVC: 2
2360-120000.38.0: RNCC: 5 | RNVC: 2
2360-120000-38-0: RNCC: 5 | RNVC: 9
2360-120000.38.0: RNCC: 5 | RNVC: 9
2360-120000.38.0: RNCC: 5 | RNVC: 9

5 Nov 1979

5340-12-313-6281
Webbing Strap

123136281
1008481: RNCC: 3 | RNVC: 2
1B7-05.082-01.3: RNCC: 5 | RNVC: 2

21 Apr 1988

5340-12-363-2877
Loop Clamp

123632877
DIN3015-ZKP-3-R-19-22-PP: RNCC: 2 | RNVC: 2

20 May 2004

5340-12-147-9018
Loop Clamp

121479018
RSGU1.8058-004/9: RNCC: 3 | RNVC: 2
3209A1: RNCC: 5 | RNVC: 2
9418058004: RNCC: 5 | RNVC: 2
RSGU11-058-004-9: RNCC: 5 | RNVC: 2
0121 6770: RNCC: 5 | RNVC: 2
1216770EF8932-60: RNCC: 5 | RNVC: 2
ZWRSGU1100-4-4-9: RNCC: 5 | RNVC: 2
1216770: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-382-0642
Retaining Strap

123820642
MMN346AD65D9: RNCC: 3 | RNVC: 2

4 May 2010

5340-12-317-2532
Angle Bracket

123172532
CF 446 892: RNCC: 3 | RNVC: 2
CF 446 892: RNCC: 5 | RNVC: 2

21 Mar 1989

5340-12-326-1267
Nonmetallic Bumper

123261267
5590900122: RNCC: 3 | RNVC: 2

12 Aug 1991

5340-12-314-7190
Angle Bracket

123147190
5802017-600580.05: RNCC: 2 | RNVC: 2
5802017-600580.05: RNCC: 3 | RNVC: 2

3 Aug 1988

5340-12-380-5354
Extension Drawer Slide

123805354
DZ9301-0018: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-12-164-1135
Bail Handle

121641135
5651-65X50: RNCC: 3 | RNVC: 2
GSV5651-65X50: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-172-8947
Retaining Strap

121728947
81974010680: RNCC: 3 | RNVC: 2
02823019: RNCC: 5 | RNVC: 2
2823019EE7103-07: RNCC: 5 | RNVC: 2
23240-070005-001-0: RNCC: 5 | RNVC: 9
23240-070005.001.0: RNCC: 5 | RNVC: 9

2 Mar 1978

5340-12-195-2972
Retaining Band

121952972
SP12/1000X0,6-1.4301: RNCC: 3 | RNVC: 2
SP12X1000X0-6-1-4301: RNCC: 5 | RNVC: 2

7 Feb 1983

5340-12-199-1165
Angle Bracket

121991165
A-296655-419: RNCC: 3 | RNVC: 2
A296655-419: RNCC: 5 | RNVC: 2

28 Mar 1984

5340-12-360-2087
Door Button

123602087
SCZ 1014 S-HN: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-187-7316
Angle Bracket

121877316
2300109-010200.004.0: RNCC: 3 | RNVC: 2
2300109-010200.004.0: RNCC: 3 | RNVC: 2
2300109-010200-004-0: RNCC: 5 | RNVC: 2
2300109-010200-004-0: RNCC: 5 | RNVC: 2
2300109-010200.004.0: RNCC: 5 | RNVC: 9
2300109-010200-004-0: RNCC: 5 | RNVC: 9

4 May 1981

5340-12-702-4720
Mounting Bracket

127024720
VG95211-ML-127024720: RNCC: 2 | RNVC: 2
5.51.0604.0604.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-329-5845
Catch Strike

123295845
95048-105-003-006: RNCC: 3 | RNVC: 2
95048-105-003-006: RNCC: 5 | RNVC: 9

4 Sep 1992

5340-12-193-9844
Dust And Moisture Seal Protective Cap

121939844
F00993842: RNCC: 3 | RNVC: 2
F0.099.3842: RNCC: 5 | RNVC: 2
KD498-80-61PPD: RNCC: 5 | RNVC: 9

21 Sep 1982

5340-12-340-5462
Mounting Bracket

123405462
5902001940: RNCC: 3 | RNVC: 2
5902001940: RNCC: 5 | RNVC: 2
5902001940: RNCC: 5 | RNVC: 2
590 200 19 40: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-360-3250
Mounting Plate

123603250
3513632600: RNCC: 3 | RNVC: 2
3513632600: RNCC: 5 | RNVC: 2

8 May 2003

5340-12-386-0492
Angle Bracket

123860492
T622M1003229: RNCC: 3 | RNVC: 2

3 Aug 2011

5340-12-365-6043
Mounting Bracket

123656043
9436890914: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-315-6894
Angle Bracket

123156894
A0123109400: RNCC: 3 | RNVC: 2

19 Nov 1988

5340-12-360-0014
Mounting Bracket

123600014
9414294640: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-321-7206
Mounting Bracket

123217206
40 0168 007: RNCC: 2 | RNVC: 2
40 0168 007: RNCC: 3 | RNVC: 2
40 0168 007: RNCC: 5 | RNVC: 9

19 Jun 1990

5340-12-300-6684
Angle Bracket

123006684
4422420131: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-389-0676
Expansion Shield

123890676
062020: RNCC: 3 | RNVC: 2
062020: RNCC: 5 | RNVC: 2
07401312: RNCC: 5 | RNVC: 2
2500601083: RNCC: 5 | RNVC: 2

23 May 2012

5340-12-381-2947
Mounting Plate

123812947
424-12-SIB3: RNCC: 3 | RNVC: 2
4250473101162: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-362-2750
Double Angle Bracket

123622750
J27420051-403: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-326-8148
Metallic Bumper

123268148
279.602 432: RNCC: 3 | RNVC: 2
1392152-350001.028: RNCC: 5 | RNVC: 9

28 Oct 1991

5340-12-164-7974
Butt Hinge Leaf

121647974
160-73418-02: RNCC: 3 | RNVC: 2
160-73418-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-161-0384
Rod End Connector

121610384
160-24208-03: RNCC: 3 | RNVC: 2
160-24208-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-355-0869
Metal Grille

123550869
8320-0022: RNCC: 2 | RNVC: 2
8320-0022: RNCC: 3 | RNVC: 2

4 Oct 2001

5340-12-152-4841
Retaining Strap

121524841
115-02695-4: RNCC: 3 | RNVC: 9
1092105-3701-005: RNCC: 5 | RNVC: 9
1092105-3701-005: RNCC: 5 | RNVC: 9
4-7822-868: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-154-6111
Mending Plate

121546111
111G08013: RNCC: 3 | RNVC: 2
111G08013E1: RNCC: 5 | RNVC: 2
111G08013: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-320-0297
Friction Catch

123200297
47.114.11/1: RNCC: 3 | RNVC: 2
C3755143MN: RNCC: 5 | RNVC: 2
CF 832 348 AR: RNCC: 5 | RNVC: 2

29 Nov 1989

5340-12-142-9640
Retaining Clip

121429640
A10-28-770-03-0: RNCC: 3 | RNVC: 2
A10-28-770-03-0: RNCC: 5 | RNVC: 2
A10-28-770-03-0: RNCC: 5 | RNVC: 2
A10-28-770-03-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-172-1696
Bow Handle

121721696
1224-160: RNCC: 3 | RNVC: 2

27 Dec 1977

5340-12-371-0450
Access Cover

123710450
2581-305000: RNCC: 3 | RNVC: 2

30 Jan 2007

5340-12-386-0161
Bow Handle

123860161
2500262-198310.000.0: RNCC: 3 | RNVC: 2

1 Aug 2011

5340-12-173-8544
Retaining Strap

121738544
P-296652-011: RNCC: 3 | RNVC: 2
P296652-011: RNCC: 5 | RNVC: 2

17 May 1978

5340-12-386-1539
Bail Handle

123861539
2500262-196714.000.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-320-6467
Helical Compression Spring Seat

123206467
991-410800.13.0: RNCC: 3 | RNVC: 2
991-410800.13.0: RNCC: 5 | RNVC: 9

5 Feb 1990

5340-12-196-9966
Webbing Strap

121969966
01803-2-SCHLAUFE-FE460MM-LE750MM: RNCC: 3 | RNVC: 2
79016/SCHLAUFE-1210-460: RNCC: 3 | RNVC: 2
4900059-112013.000.0: RNCC: 3 | RNVC: 2
4900059-112013-000-0: RNCC: 5 | RNVC: 2
DIN60060-2-50X460X750-C1/SCHLAUF: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-349-8625
Double Angle Bracket

123498625
58R137-1350-1: RNCC: 2 | RNVC: 2
58R137-1350-1: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-12-385-5401
Bridge Clamp

123855401
10187-002000.001.0: RNCC: 2 | RNVC: 2
10187-002000.001.0: RNCC: 3 | RNVC: 2

14 Jun 2011

5340-12-701-5707
Mounting Plate

127015707
VG95211-ML-127015707: RNCC: 2 | RNVC: 2
5.12.6149.0220.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-313-0140
Double Angle Bracket

123130140
P-086147-009: RNCC: 3 | RNVC: 2
P086147-009: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-341-8755
Access Cover

123418755
2094-191730.000.0: RNCC: 2 | RNVC: 2
2094-191730.000.0: RNCC: 3 | RNVC: 2

9 Nov 1996

5340-12-319-4812
Angle Bracket

123194812
2300007-012600.003.0: RNCC: 2 | RNVC: 2
2300007-012600.003.0: RNCC: 3 | RNVC: 2
2300007-012600.003.0: RNCC: 5 | RNVC: 2

5 Oct 1989

5340-12-197-3589
Handwheel

121973589
E801-00-2-1-G-ALMG3: RNCC: 3 | RNVC: 2

17 Oct 1983

5340-12-308-4837
Bridge Clamp

123084837
2300223-201000.05.0: RNCC: 2 | RNVC: 2
2300223-201000.05.0: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-12-334-8170
Mounting Plate

123348170
C230ZZ2D002-000: RNCC: 3 | RNVC: 2

23 Jun 1994

5340-12-321-2889
Clamping Catch

123212889
FFVUOE-341296: RNCC: 3 | RNVC: 2

27 Apr 1990

5340-12-380-5781
Mending Plate

123805781
TS4011-804: RNCC: 3 | RNVC: 2

10 Nov 2009

5340-12-300-6929
Nonmetallic Bumper

123006929
DIN95364-F35X42-M8X12-NR60ST: RNCC: 2 | RNVC: 2
E1521 AUSF.A: RNCC: 5 | RNVC: 2
81140-35X42-M8X12.NR60.ST: RNCC: 5 | RNVC: 2
03552989: RNCC: 5 | RNVC: 2
VG95364-F35X42-M8X12-NR60ST: RNCC: 5 | RNVC: 9

23 Aug 1984

5340-12-192-5860
Pad Eye

121925860
2800042-0-01: RNCC: 2 | RNVC: 2

6 May 1982

5340-12-179-9917
Retaining Strap

121799917
06670660211: RNCC: 3 | RNVC: 2
2X16-8-QSTE340N-MAN183-B1: RNCC: 5 | RNVC: 2
003137-0000: RNCC: 5 | RNVC: 2
06.67064-0211A: RNCC: 5 | RNVC: 9
06670630211: RNCC: 5 | RNVC: 9
06670640211: RNCC: 5 | RNVC: 9

17 Aug 1979

5340-12-348-0221
Loop Clamp

123480221
0500030014020: RNCC: 3 | RNVC: 2
503 388: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-12-367-1342
Angle Bracket

123671342
5842002940: RNCC: 3 | RNVC: 2

12 Jul 2005

5340-12-336-9749
Loop Clamp

123369749
81974450180: RNCC: 3 | RNVC: 2
81.97445.0180: RNCC: 5 | RNVC: 2
12091946: RNCC: 5 | RNVC: 2

4 Jan 1995

5340-12-327-5032
Nonmetallic Bumper

123275032
11227909300: RNCC: 3 | RNVC: 2

28 Jan 1992

5340-12-326-9919
Mounting Plate

123269919
5802017-710585.01: RNCC: 2 | RNVC: 2
7801765191: RNCC: 3 | RNVC: 2
78017 65191: RNCC: 5 | RNVC: 9

18 Nov 1991

5340-12-387-1341
Snap-In Hinged Standoff

123871341
5582311: RNCC: 2 | RNVC: 2
5582311: RNCC: 3 | RNVC: 2
504357787: RNCC: 5 | RNVC: 2
(241)A4249504357787: RNCC: 5 | RNVC: 2

9 Nov 2011

5340-12-367-6196
Mounting Bracket

123676196
2309244000: RNCC: 3 | RNVC: 2

13 Sep 2005

5340-12-340-5056
Mechanic Equipment Hardware Kit

123405056
1.190.070.7: RNCC: 3 | RNVC: 2

24 Apr 1996

5340-12-335-4278
Access Cover

123354278
8 695 521 373: RNCC: 3 | RNVC: 2

18 Aug 1994

5340-12-350-5598
Manual Control Lever

123505598
10063-212000.02.1: RNCC: 3 | RNVC: 2
10063-212000.02.1: RNCC: 5 | RNVC: 9

14 Apr 2000

5340-12-701-7650
Angle Bracket

127017650
VG95211-ML-127017650: RNCC: 2 | RNVC: 2
5.12.7701.8250.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-9117
Angle Bracket

127019117
R303-5-100: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-338-9724
Dust And Moisture Seal Protective Plug

123389724
700M24X1,5 RAL9005: RNCC: 3 | RNVC: 2
GPN700M24X1,5 SCHWARZ: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-12-377-1002
Cushioning Pad

123771002
1030027-972370.001.0: RNCC: 3 | RNVC: 2
1030027-972370.001.0: RNCC: 5 | RNVC: 2

11 Dec 2008

5340-12-340-3447
Helical Compression Spring Seat

123403447
6.234.0.342.002.4: RNCC: 3 | RNVC: 9
1216 3202: RNCC: 5 | RNVC: 2
12163202EE0120-01: RNCC: 5 | RNVC: 2
1216 3202: RNCC: 5 | RNVC: 9
6-234-0-342-002-4: RNCC: 5 | RNVC: 9

28 Mar 1996

5340-12-393-7320
Mounting Bracket

123937320
11.40943-0340: RNCC: 3 | RNVC: 2
11.40943-0340: RNCC: 5 | RNVC: 2

8 Oct 2013

5340-12-701-5961
Mounting Plate

127015961
VG95211-ML-127015961: RNCC: 2 | RNVC: 2
5.12.6501.1763.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-5330
Manual Control Lever

123425330
2300421-183220.000.4: RNCC: 2 | RNVC: 2
9917031.4: RNCC: 3 | RNVC: 2
2300421-183220.000.4: RNCC: 5 | RNVC: 2
9917031.4: RNCC: 5 | RNVC: 9
2300421-183220.000.4: RNCC: 5 | RNVC: 9

25 Feb 1997

5340-12-315-2550
Angle Bracket

123152550
3873120787: RNCC: 3 | RNVC: 2
387 312 07 87: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-353-4838
Access Cover

123534838
5802017-716300.00: RNCC: 2 | RNVC: 2
5802017-716300.00: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-12-149-7666
Rohr Durchfuehrung

5340-12-310-0943
Kunst Gleitschiene

123100943
272.1800.121-02: RNCC: 2 | RNVC: 2
272.1800.121-02: RNCC: 3 | RNVC: 2

7 Apr 1987

5340-12-317-3244
Mounting Plate

123173244
4900064-4124.005: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-331-0310
Electronic Equipment Hardware Kit

123310310
510025-0000.00: RNCC: 3 | RNVC: 2

15 Mar 1993

5340-12-318-7371
Nut And Bolt Locking Plate

123187371
PAN3409-10: RNCC: 3 | RNVC: 2
PAN3409-10: RNCC: 5 | RNVC: 2

11 Aug 1989

5340-12-185-1976
Angle Bracket

121851976
DIN7463-C10BK: RNCC: 2 | RNVC: 2
C10DIN7463R0H: RNCC: 5 | RNVC: 2

20 Sep 1980

5340-12-378-0876
Rim Lock Set

123780876
320.001-098: RNCC: 3 | RNVC: 2
320.001-098: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-12-365-2221
Extension Drawer Slide Section

123652221
5161-211100A01B: RNCC: 2 | RNVC: 2
5161-211100A01B: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-368-9945
Manual Control Handle

123689945
TK AP 02 01: RNCC: 3 | RNVC: 2
TL8465-0169: RNCC: 4 | RNVC: 1

11 May 2006

5340-12-178-6428
Access Cover

121786428
2000015-120-01: RNCC: 2 | RNVC: 2
2000015-120-01: RNCC: 5 | RNVC: 2
2000015-120-01: RNCC: 5 | RNVC: 9

7 May 1979

5340-12-312-5437
Resilient Mount

123125437
L44-AA-10: RNCC: 3 | RNVC: 2
L44-AA-10: RNCC: 5 | RNVC: 9
L44AA-10: RNCC: 5 | RNVC: 9

15 Jan 1988

5340-12-321-0459
Mounting Bracket

123210459
2300269-200100.000.0: RNCC: 2 | RNVC: 2
790-53.00.000-25: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-12-363-8477
Angle Bracket

123638477
J28230103-001: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-199-5146
Mending Plate

121995146
2300002-064000.001: RNCC: 2 | RNVC: 2
2300002-064000.001: RNCC: 3 | RNVC: 2
2300002-064000.001: RNCC: 5 | RNVC: 9
2300002-064000-001: RNCC: 5 | RNVC: 9

8 May 1984

5340-12-323-9135
Nonmetallic Bumper

123239135
59007101: RNCC: 3 | RNVC: 2
KE180/120KERN A QAL OTIII-COMPL.: RNCC: 3 | RNVC: 2
KE180/120KERN-A-QUALOTIIIKOMPLET: RNCC: 3 | RNVC: 2
81960201001: RNCC: 5 | RNVC: 2
81.96020.1001: RNCC: 5 | RNVC: 2
81960201001: RNCC: 5 | RNVC: 2
MGW650212S4: RNCC: 5 | RNVC: 2
81.96020.1001: RNCC: 5 | RNVC: 2
MGW 65 0212 S4: RNCC: 5 | RNVC: 2

9 Jan 1991

5340-12-320-7065
Metal Grille

123207065
C249-A40-C201: RNCC: 2 | RNVC: 2
C249-A40-C201: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-305-1281
Mending Plate

123051281
P-243842-404: RNCC: 3 | RNVC: 2
P243842-404: RNCC: 5 | RNVC: 2

30 Sep 1985

5340-12-187-7701
Nut And Bolt Locking Plate

121877701
5562772/4: RNCC: 3 | RNVC: 2
5562772-4: RNCC: 5 | RNVC: 2

6 May 1981

5340-12-151-6238
Retaining Strap

121516238
2360-069661.01.0: RNCC: 2 | RNVC: 2
2360-069661-01-0: RNCC: 5 | RNVC: 2
2360-069661.01.0: RNCC: 5 | RNVC: 2
2360-069661.01.0: RNCC: 5 | RNVC: 2
2360-069661-01-0: RNCC: 5 | RNVC: 9
2360-069661.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-4008
Access Door

123174008
1000192-02 0 13200: RNCC: 2 | RNVC: 2
1000192-02 0 13200: RNCC: 3 | RNVC: 2
1000192-02 0 13200: RNCC: 5 | RNVC: 9

5 Apr 1989

5340-12-313-0199
Double Angle Bracket

123130199
P-086149-007: RNCC: 3 | RNVC: 2
P086149-007: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-317-8101
Mounting Plate

123178101
1000192-01 4 40900.01: RNCC: 2 | RNVC: 2
1000192-01 4 40900.01: RNCC: 3 | RNVC: 2
1000192-01 4 40900.01: RNCC: 5 | RNVC: 9

17 May 1989

5340-12-701-2945
Rod End Connector

127012945
VG95211-ML-127012945: RNCC: 2 | RNVC: 2
5.12.5101.4350.00: RNCC: 3 | RNVC: 2
0501403166499: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-199-6902
Double Angle Bracket

121996902
A-296770-047: RNCC: 3 | RNVC: 2
A296770-047: RNCC: 5 | RNVC: 2

23 May 1984

5340-12-196-4343
Mending Plate

121964343
P-855991-001: RNCC: 3 | RNVC: 2
P855991-001: RNCC: 5 | RNVC: 2

6 Jul 1983

5340-12-701-5214
Loop Clamp

127015214
VG95211-ML-127015214: RNCC: 2 | RNVC: 2
5.12.6100.5180.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-376-0836
Loop Clamp

123760836
1506467: RNCC: 3 | RNVC: 2
RSGU 2.8-10/15 W1: RNCC: 3 | RNVC: 2
RSGU 2.8-10/15 W1: RNCC: 5 | RNVC: 2

11 Aug 2008

5340-12-307-8218
Nonmetallic Bumper

123078218
33A47-0026-00.002: RNCC: 3 | RNVC: 2
FS26448: RNCC: 5 | RNVC: 9

30 Jul 1986

5340-12-335-4431
Mending Plate

123354431
347-130-009A: RNCC: 3 | RNVC: 2

18 Aug 1994

5340-12-304-1158
Double Angle Bracket

123041158
P-296805-409: RNCC: 3 | RNVC: 2
P296805-409: RNCC: 5 | RNVC: 2

12 Jun 1985

5340-12-393-8438
Mounting Bracket

123938438
11.48952-0142: RNCC: 3 | RNVC: 2
11.48952-0142: RNCC: 5 | RNVC: 2

16 Oct 2013

5340-12-321-9120
Angle Bracket

123219120
48432-001: RNCC: 3 | RNVC: 2
48 432-001: RNCC: 5 | RNVC: 9

9 Jul 1990

5340-12-196-1301
Handwheel

121961301
NO PRIMARY REF 12-196-1301: RNCC: 3 | RNVC: 2
DIN956-125X14K: RNCC: 5 | RNVC: 9
125X14KDIN956: RNCC: 5 | RNVC: 9

1 Jun 1983

5340-12-310-6778
Expansion Plug

123106778
DIN470-8-ST-PHR: RNCC: 2 | RNVC: 2

15 Jun 1987

5340-12-339-2574
Double Angle Bracket

123392574
11.59656-0002: RNCC: 3 | RNVC: 2
596-076: RNCC: 5 | RNVC: 2
D11.59656-0002: RNCC: 5 | RNVC: 2
596-076: RNCC: 5 | RNVC: 2

31 Oct 1995

5340-12-340-3956
Mounting Bracket

123403956
463-151315.000: RNCC: 3 | RNVC: 2
463-151315.000: RNCC: 5 | RNVC: 9
9897656: RNCC: 5 | RNVC: 9

4 Apr 1996

5340-12-389-5945
Expansion Plug

123895945
DIN443-34-A-ST: RNCC: 2 | RNVC: 2
000000004057: RNCC: 3 | RNVC: 2

26 Jul 2012

5340-12-130-4701
Turnbuckle

121304701
DIN82004-A0,4: RNCC: 2 | RNVC: 2
DIN82004-A0,4-ROH: RNCC: 3 | RNVC: 2
6500012S: RNCC: 5 | RNVC: 2
A0-4DIN82004: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-700-8610
Rod End Clevis

127008610
VG95211-ML-127008610: RNCC: 2 | RNVC: 2
155N1239-7: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-345-9910
Angle Bracket

123459910
1203 4383: RNCC: 3 | RNVC: 2
12034383ED0111-38: RNCC: 5 | RNVC: 2
3.602.0.637.034.4: RNCC: 5 | RNVC: 9

27 May 1998

5340-12-366-9614
Lock-Release Lever

123669614
GN501-100-M12-SW: RNCC: 3 | RNVC: 2
HGS525-230/2029-1: RNCC: 5 | RNVC: 2

23 Jun 2005

5340-12-369-7725
Mounting Bracket

123697725
1865-010431.00.0: RNCC: 3 | RNVC: 2
7073209: RNCC: 5 | RNVC: 2

16 Aug 2006

5340-12-333-8794
Support Hook

123338794
3522230441: RNCC: 3 | RNVC: 2

21 Feb 1994

5340-12-379-0146
Dust And Moisture Seal Protective Plug

123790146
1303325A: RNCC: 3 | RNVC: 2

15 Jun 2009

5340-12-317-1441
Flush Lock

123171441
135359: RNCC: 3 | RNVC: 2

14 Mar 1989

5340-12-359-7240
Mounting Bracket

123597240
6410.230.021.060: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-010-8473

5340-12-313-8660
Angle Bracket

123138660
4254760536: RNCC: 3 | RNVC: 2
425 476 05 36: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-317-3235
Mounting Bracket

123173235
4900064-41226.008: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-340-3337
Mounting Bracket

123403337
HALTERUNG F.30MANSATZMAGAZIN: RNCC: 3 | RNVC: 2

27 Mar 1996

5340-12-325-7993
Nonmetallic Bumper

123257993
5801984-980600.003.0: RNCC: 2 | RNVC: 2
PLATTE55X20X20MM.NR60: RNCC: 3 | RNVC: 2
5801984-980600.003.0: RNCC: 5 | RNVC: 2

11 Jul 1991

5340-12-302-6150
Mending Plate

123026150
YK03230865: RNCC: 3 | RNVC: 2
03230865: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 23 0865: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-328-3166
Mounting Plate

123283166
CF 832 355 B: RNCC: 2 | RNVC: 2
CF 832 355 B: RNCC: 3 | RNVC: 2

7 May 1992

5340-12-336-6895
Loop Clamp

123366895
3000 377: RNCC: 3 | RNVC: 2
3 000 377: RNCC: 5 | RNVC: 2

8 Dec 1994

5340-12-315-3047
Mounting Bracket

123153047
6214900240: RNCC: 3 | RNVC: 2
621 490 02 40: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-700-8532
Loop Clamp

127008532
VG95211-ML-127008532: RNCC: 2 | RNVC: 2
155N1119-561: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-189-4472
Loop Clamp

121894472
F1141486-0001: RNCC: 3 | RNVC: 2
F11.41486-0001: RNCC: 5 | RNVC: 2
F11.41486-0001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-12-371-5427
Retaining Clip

123715427
T881M4033208: RNCC: 2 | RNVC: 2
T881M4033208: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-12-356-8960
Mounting Plate

123568960
1948070K1403: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-12-020-7115

5340-12-392-9823
Angle Bracket

123929823
4000004181: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-12-343-9913
Access Cover

123439913
5466401: RNCC: 3 | RNVC: 2
EZ 54664: RNCC: 5 | RNVC: 2

25 Aug 1997

5340-12-362-3077
Loop Clamp

123623077
LN9490BM11: RNCC: 2 | RNVC: 2

5 Feb 2004

5340-12-362-0071
Rod End Clevis

123620071
117-84445.01: RNCC: 3 | RNVC: 2

16 Dec 2003

5340-12-183-1448
Rod End Clevis

121831448
2326001: RNCC: 3 | RNVC: 2

20 Mar 1980

5340-12-361-8756
Plug Button

123618756
422900108: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-12-305-1106
Metal Runner

123051106
4900059-111121.002.0: RNCC: 3 | RNVC: 2
1228075: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-339-0524
Catch Strike

123390524
100061273: RNCC: 3 | RNVC: 2
4617430203: RNCC: 5 | RNVC: 2

4 Oct 1995

5340-12-313-2534
Angle Bracket

123132534
200281: RNCC: 3 | RNVC: 2
23K26 0008 03.002: RNCC: 5 | RNVC: 2

16 Mar 1988

5340-12-320-7133
Support Hook

123207133
9000 6115: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-310-4508
Dust And Moisture Seal Protective Plug

123104508
300F23: RNCC: 3 | RNVC: 2
279.627 258: RNCC: 5 | RNVC: 2
300002300: RNCC: 5 | RNVC: 2
GPN300,F23: RNCC: 5 | RNVC: 2

22 May 1987

5340-12-164-0182
Loop Clamp

121640182
DIN3016-1-E2-14-25X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E2-14-25X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.14-25/15: RNCC: 3 | RNVC: 2
4209102014: RNCC: 5 | RNVC: 2
RSGU14-25-15: RNCC: 5 | RNVC: 2
RSGU14-25/15: RNCC: 5 | RNVC: 2
DIN3016-E2-14-25X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-5218
Dust And Moisture Seal Protective Cap

121885218
TL-4-388: RNCC: 3 | RNVC: 2
TL4-388: RNCC: 5 | RNVC: 2

15 Jul 1981

5340-12-305-0562
Mending Plate

123050562
P-230330-013: RNCC: 3 | RNVC: 2
P230330-013: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-323-9392
Resilient Mount

123239392
H160-267-95-112-8FM: RNCC: 3 | RNVC: 2
H 160-267-95-112-8FM: RNCC: 5 | RNVC: 2

10 Jan 1991

5340-12-308-6456
Butt Hinge

123086456
A-245875-041: RNCC: 3 | RNVC: 2
A245875-041: RNCC: 5 | RNVC: 2

31 Oct 1986

5340-12-164-1270
Loop Clamp

121641270
DIN3016-1-D2-16-16-16X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-16-16-16X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.3X16/15: RNCC: 3 | RNVC: 2
RSGU1100.3X16/15: RNCC: 5 | RNVC: 2
RSGU1100-3X16-15: RNCC: 5 | RNVC: 2
4219315016: RNCC: 5 | RNVC: 2
DIN3016-D2-16-16-16X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-6710
Dust And Moisture Seal Protective Plug

121966710
E816.00-33-1: RNCC: 3 | RNVC: 2
E816-00-33-1: RNCC: 5 | RNVC: 2

1 Aug 1983

5340-12-701-7157
Angle Bracket

127017157
VG95211-ML-127017157: RNCC: 2 | RNVC: 2
5.12.7601.4180.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-9540
Rod End Clevis

127019540
VG95211-ML-127019540: RNCC: 2 | RNVC: 2
5.12.6401.0090.00: RNCC: 3 | RNVC: 2
0501403287099: RNCC: 5 | RNVC: 2

13 Mar 1995

5340-12-317-4418
Expansion Plug

123174418
DIN442-28-1.4401: RNCC: 2 | RNVC: 2

7 Apr 1989

5340-12-376-4168
Retaining Strap

123764168
DIN72571-1-22-W5: RNCC: 2 | RNVC: 2

25 Sep 2008

5340-12-701-3450
Rod End Connector

127013450
VG95211-ML-127013450: RNCC: 2 | RNVC: 2
5.12.5111.3560.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-354-7701
Loop Clamp

123547701
211-10080: RNCC: 3 | RNVC: 2
6.373-542.0: RNCC: 5 | RNVC: 2

23 Aug 2001

5340-12-303-2632
Mending Plate

123032632
P-886701-001: RNCC: 3 | RNVC: 2
P886701-001: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-307-6611
Angle Bracket

123076611
1218 9390: RNCC: 3 | RNVC: 2
12189390: RNCC: 5 | RNVC: 9
6-226-0-982-051-4: RNCC: 5 | RNVC: 9
6.226.0.982.051.4: RNCC: 5 | RNVC: 9

14 Jul 1986

5340-12-344-0313
Webbing Strap

123440313
79017/026-0800-0300: RNCC: 3 | RNVC: 2
DIN60060-2-25X300X500-C4/D2: RNCC: 5 | RNVC: 9

1 Sep 1997

5340-12-701-3974
Loop Clamp

127013974
VG95211-ML-127013974: RNCC: 2 | RNVC: 2
5.12.5311.2970.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-8523
Loop Clamp

127008523
VG95211-ML-127008523: RNCC: 2 | RNVC: 2
155N1119-376: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-195-8595
Handle Grip

121958595
5.321-020.0: RNCC: 3 | RNVC: 2
5-321-020: RNCC: 5 | RNVC: 9
5.321-020: RNCC: 5 | RNVC: 9

25 Apr 1983

5340-12-362-0080
Loop Clamp

123620080
DIN3016-1-E1-36X15-W1-2-NBR: RNCC: 2 | RNVC: 2

16 Dec 2003

5340-12-312-9797
Webbing Strap

123129797
2500211-405000.00: RNCC: 2 | RNVC: 2
200.3096/5: RNCC: 3 | RNVC: 2
2500211-405000.00: RNCC: 3 | RNVC: 2
000-B2-19X2,0X105-BW-RAL6031: RNCC: 6 | RNVC: 9

24 Feb 1988

5340-12-346-6372
Nonmetallic Bumper

123466372
5-612-2689: RNCC: 3 | RNVC: 2

19 Aug 1998

5340-12-189-8467
Dust And Moisture Seal Protective Cap

121898467
821.0.4: RNCC: 3 | RNVC: 2
821-04M0DD: RNCC: 5 | RNVC: 2

22 Oct 1981

5340-12-330-6893
Electrical-Mechanical Equipment Post

123306893
VG95148B5XM2,5X10-ST: RNCC: 2 | RNVC: 2
5.02.104: RNCC: 3 | RNVC: 2
VG95148B5XM2,5X10-ST: RNCC: 3 | RNVC: 2

28 Jan 1993

5340-12-157-9972
Dust And Moisture Seal Protective Cap

121579972
23305-201030.00.0: RNCC: 2 | RNVC: 2
23305-201030-00-0: RNCC: 5 | RNVC: 2
23305-201030-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-2472
Door Handle

123162472
NO PRIMARY REF 12-316-2472: RNCC: 3 | RNVC: 2
M/6298/0/4: RNCC: 5 | RNVC: 9

4 Jan 1989

5340-12-303-9494
Resilient Mount

123039494
DIN95363-C25X25-NBR55ST: RNCC: 2 | RNVC: 2
811.020.025.025.06.NBR55.ST: RNCC: 5 | RNVC: 2
8798990137: RNCC: 5 | RNVC: 2
81120-25X25-M6.NBR55.STZN: RNCC: 5 | RNVC: 2
81120-25X25-M6.NBR55.ST: RNCC: 5 | RNVC: 2
1.25.25.2.55NBR/ST: RNCC: 5 | RNVC: 2
8798990137: RNCC: 5 | RNVC: 9
VG95363-C25X25-NBR55ST: RNCC: 5 | RNVC: 9
8798990137: RNCC: 5 | RNVC: 9
VG95363-C25X25-NBR55STZN: RNCC: 5 | RNVC: 9

23 May 1985

5340-12-342-3070
Lock-Release Lever

123423070
2300395-187000.009.0: RNCC: 3 | RNVC: 2

21 Jan 1997

5340-12-314-9423
Handle Grip

123149423
GN203-26-M10: RNCC: 3 | RNVC: 2
03150-100MM: RNCC: 5 | RNVC: 2
2510-3769-00: RNCC: 5 | RNVC: 2
2510376900: RNCC: 5 | RNVC: 2
26GN203: RNCC: 5 | RNVC: 2
01409-GR.7-M10: RNCC: 5 | RNVC: 2

31 Aug 1988

5340-12-174-2916
Nonmetallic Bumper

121742916
23223-189329.01.0: RNCC: 3 | RNVC: 2
23223-189329-01-0: RNCC: 3 | RNVC: 2
23223-189329-01-0: RNCC: 5 | RNVC: 9
23223-189329.01.0: RNCC: 5 | RNVC: 9

21 Jun 1978

5340-12-332-2567
Mounting Bracket

123322567
480-7345-07-00-01: RNCC: 3 | RNVC: 2
480/7345-07-00-01: RNCC: 5 | RNVC: 2

27 Jul 1993

5340-12-306-1430
Resilient Mount

123061430
2K1-BAM-10: RNCC: 3 | RNVC: 2
352250042431: RNCC: 5 | RNVC: 2
2K1-BAM-10: RNCC: 5 | RNVC: 9
2K1BAM10: RNCC: 5 | RNVC: 9

30 Jan 1986

5340-12-330-1231
Dust And Moisture Seal Protective Plug

123301231
700M20: RNCC: 3 | RNVC: 2
GPN700M20: RNCC: 5 | RNVC: 2
GPN700-AM20: RNCC: 5 | RNVC: 9
GPN700-M20: RNCC: 5 | RNVC: 9

5 Nov 1992

5340-12-176-2498
Access Cover

121762498
2655-153: RNCC: 3 | RNVC: 2
2655153: RNCC: 5 | RNVC: 2

23 Nov 1978

5340-12-165-2807
Bow Handle

121652807
V22.280.13200-02: RNCC: 3 | RNVC: 2
V22-280-13200-02EZ: RNCC: 5 | RNVC: 2
5800375-13200-02: RNCC: 5 | RNVC: 9
5800375-13200.02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-1477
Mortise Lock Set

121781477
00-395-0000: RNCC: 3 | RNVC: 2
00-395-000-00157A: RNCC: 5 | RNVC: 2
003950000: RNCC: 5 | RNVC: 2
0609852: RNCC: 5 | RNVC: 2
609852: RNCC: 5 | RNVC: 9

22 Mar 1979

5340-12-331-5254
Butt Hinge

123315254
U100-3412-300: RNCC: 2 | RNVC: 2
U100-3412-300: RNCC: 3 | RNVC: 2

17 May 1993

5340-12-701-6369
Mounting Plate

127016369
VG95211-ML-127016369: RNCC: 2 | RNVC: 2
5.12.7070.1140.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-365-5836
Angle Bracket

123655836
J28230120-001: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-168-5688
Mending Plate

121685688
1000025-260630-03: RNCC: 3 | RNVC: 2
1000025-260630.03: RNCC: 3 | RNVC: 2
1000025-260630-03: RNCC: 5 | RNVC: 9
1000025-260630.03: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-134-1352
Butt Hinge Leaf

121341352
5565-06-29-30: RNCC: 3 | RNVC: 2
5565-06-29.30: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-326-5525
Catch Strike

123265525
2016.0864: RNCC: 3 | RNVC: 2
KS/RAT/55: RNCC: 5 | RNVC: 2

7 Oct 1991

5340-12-333-3092
Mending Plate

123333092
NO PRIMARY REF 12-333-3092: RNCC: 3 | RNVC: 2
21-4100-04: RNCC: 5 | RNVC: 9
21-4100.04: RNCC: 5 | RNVC: 9

23 Nov 1993

5340-12-320-6194
Mounting Bracket

123206194
2300245-261020.00.0: RNCC: 2 | RNVC: 2
2300245-261020.00.0: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-12-379-4525
Mounting Bracket

123794525
0891271: RNCC: 3 | RNVC: 2

24 Jul 2009

5340-12-326-2082
Angle Bracket

123262082
3964661440: RNCC: 3 | RNVC: 2
396 466 14 40: RNCC: 5 | RNVC: 2

16 Aug 1991

5340-12-365-9240
Loop Clamp

123659240
2481D160: RNCC: 3 | RNVC: 2

17 Feb 2005

Load More Results