What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 26 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 26 of 178

5340-12-333-4119
Access Door

123334119
136-768426-00: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-701-3027
Mounting Bracket

127013027
VG95211-ML-127013027: RNCC: 2 | RNVC: 2
5.12.5101.5180.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-2121
Multiple Angle Bracket

123612121
J28630076-405: RNCC: 3 | RNVC: 2

4 Sep 2003

5340-12-199-6439
Double Angle Bracket

121996439
2300002-041000.009: RNCC: 2 | RNVC: 2
2300002-041000.009: RNCC: 3 | RNVC: 2
2300002-041000-009: RNCC: 5 | RNVC: 9
2300002-041000.009: RNCC: 5 | RNVC: 9

18 May 1984

5340-12-313-3385
Manual Control Handle

123133385
2300194-181240.000: RNCC: 3 | RNVC: 2
2300194-181240.000: RNCC: 5 | RNVC: 9
9845142: RNCC: 5 | RNVC: 9
2300194-181240.000: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-151-5015
Strap Fastener Loop

121515015
DIN5293-28-ZN: RNCC: 2 | RNVC: 2
DIN5293-28-ZN: RNCC: 3 | RNVC: 2
554.7995: RNCC: 5 | RNVC: 2
005293028003: RNCC: 5 | RNVC: 2
28DIN5293VERZINKT: RNCC: 5 | RNVC: 2
5547995: RNCC: 5 | RNVC: 2
28DIN5293-ZN: RNCC: 5 | RNVC: 2
DIN5293-28ZN: RNCC: 5 | RNVC: 2
381025: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-342-7401
Mounting Plate

123427401
212 153 0101/7: RNCC: 3 | RNVC: 2
L1Z BD IT-1.31: RNCC: 5 | RNVC: 2
LIZ BD IT-1.31: RNCC: 5 | RNVC: 9

24 Mar 1997

5340-12-376-6771
Loop Clamp

123766771
RSGU1.10/15-W5-SILIKON: RNCC: 3 | RNVC: 2
09418195010: RNCC: 5 | RNVC: 2

28 Oct 2008

5340-12-198-3313
Resilient Mount

121983313
5259511: RNCC: 3 | RNVC: 2
52-59511-1: RNCC: 5 | RNVC: 2
52595111: RNCC: 5 | RNVC: 2

16 Jan 1984

5340-12-335-8460
Resilient Mount

123358460
5215-HDS-HT: RNCC: 3 | RNVC: 2
155016.HD.60SH: RNCC: 5 | RNVC: 2
60-52-15-H-M8-HD: RNCC: 5 | RNVC: 2
VG95406-N4-4Q-H-ST: RNCC: 5 | RNVC: 9
VG95406N4-4Q-H-ST: RNCC: 5 | RNVC: 9
5215-HDS-HT: RNCC: 5 | RNVC: 9

22 Sep 1994

5340-12-381-4062
Spring Tension Clip

123814062
047659: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-12-376-5205
Mounting Bracket

123765205
109311: RNCC: 3 | RNVC: 2

13 Oct 2008

5340-12-199-3314
Nonmetallic Bumper

121993314
3103300177: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-12-386-4436
Loop Clamp

123864436
DIN71555-104,5-A4C: RNCC: 2 | RNVC: 2
06670420127: RNCC: 3 | RNVC: 2
06.67042-0127: RNCC: 5 | RNVC: 2

1 Sep 2011

5340-12-306-4356
Retaining Strap

123064356
V22.917.1-29: RNCC: 3 | RNVC: 2

28 Feb 1986

5340-12-191-1074
Bow Handle

121911074
61L2-1-2AA: RNCC: 3 | RNVC: 2
5L.3741.003.90: RNCC: 5 | RNVC: 2
5L3741-003-90: RNCC: 5 | RNVC: 2

13 Jan 1982

5340-12-155-6912
Bow Handle

121556912
VG95149A64ST-CR: RNCC: 2 | RNVC: 2
ZB726-2: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-124-1195
Loop Clamp

121241195
DIN71555-65,5-PHOSPHATIERT: RNCC: 2 | RNVC: 2
65,5/71555PH: RNCC: 3 | RNVC: 2
DIN71555-65,5-PHOSPHATIERT: RNCC: 3 | RNVC: 2
DIN71555-65-5PHOSPHATIERT: RNCC: 5 | RNVC: 2
01120890: RNCC: 5 | RNVC: 2
65-5DIN71555PH0SPHATIERT: RNCC: 5 | RNVC: 2
DIN71555-65-5PH0SPHATIERT: RNCC: 5 | RNVC: 2
DIN71555-65-5PHOSPHATIERT: RNCC: 5 | RNVC: 2
93616860: RNCC: 5 | RNVC: 2
5500200065: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-394-0516
Dust And Moisture Seal Protective Cover

123940516
304234: RNCC: 3 | RNVC: 2
5281-06-00-03/29: RNCC: 5 | RNVC: 2

31 Oct 2013

5340-12-314-5926
Access Door

123145926
512214-2155.010: RNCC: 3 | RNVC: 2
512214-2155: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-12-186-7449
Mending Plate

121867449
5802206-000000.009: RNCC: 2 | RNVC: 2
535.1814: RNCC: 3 | RNVC: 2
5351814: RNCC: 5 | RNVC: 2
5802206-000000-009: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-345-0714
Retaining Strap

123450714
5008000755001: RNCC: 3 | RNVC: 2
81669120191: RNCC: 5 | RNVC: 2
1SK2070-16: RNCC: 5 | RNVC: 2

27 Jan 1998

5340-12-372-0428
Mounting Bracket

123720428
S282M4020103: RNCC: 2 | RNVC: 2
S282M4020103: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-12-314-1889
Dust And Moisture Seal Protective Cap

123141889
191711463LN8: RNCC: 3 | RNVC: 9

15 Jun 1988

5340-12-184-1886
Turnbuckle

121841886
7780297: RNCC: 3 | RNVC: 2

3 Jul 1980

5340-12-166-4505
Butt Hinge Leaf

121664505
LN9172KG: RNCC: 2 | RNVC: 2
LN9172G: RNCC: 5 | RNVC: 9

9 Sep 1976

5340-12-355-4873
Double Angle Bracket

123554873
4615010035: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-168-7472
Strap Hinge

121687472
909640509: RNCC: 3 | RNVC: 2

30 Mar 1977

5340-12-304-7491
Butt Hinge

123047491
4900123-634110.00: RNCC: 3 | RNVC: 2

19 Aug 1985

5340-12-179-5099
Double Angle Bracket

121795099
4355420340: RNCC: 3 | RNVC: 2

4 Jul 1979

5340-12-353-4617
Dust And Moisture Seal Protective Cap

123534617
D67328: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-12-344-3171
Mending Plate

123443171
111G10013: RNCC: 3 | RNVC: 2
111 G10 013 E: RNCC: 5 | RNVC: 2

15 Oct 1997

5340-12-359-3449
Lever Bracket

123593449
867001902: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-370-1394
Mounting Bracket

123701394
865347103: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-12-370-8501
Mounting Bracket

123708501
863804301: RNCC: 3 | RNVC: 2

10 Jan 2007

5340-12-391-9582
Angle Bracket

123919582
4100095-982140.005.0: RNCC: 2 | RNVC: 2
4100095-982140.005.0: RNCC: 3 | RNVC: 2

22 Apr 2013

5340-12-306-0919
Nonmetallic Bumper

123060919
5801984-980800.001.0: RNCC: 2 | RNVC: 2
5801984-980800.001.0: RNCC: 3 | RNVC: 2

27 Jan 1986

5340-12-303-1619
Dust And Moisture Seal Protective Cap-Plug

123031619
T8: RNCC: 3 | RNVC: 2
C 4098 657 20: RNCC: 5 | RNVC: 2
C 4098 657 20: RNCC: 5 | RNVC: 2

1 Mar 1985

5340-12-343-8105
Section Block Clamp

123438105
1421315012: RNCC: 3 | RNVC: 2
1 421 315 012: RNCC: 5 | RNVC: 2

30 Jul 1997

5340-12-004-2097

5340-12-004-2130

5340-12-354-5355
Friction Catch Stud

123545355
631795: RNCC: 3 | RNVC: 2
000 743 00 16: RNCC: 5 | RNVC: 9

24 Jul 2001

5340-12-327-1934
Runner

123271934
VC3784000: RNCC: 3 | RNVC: 2
VC3784: RNCC: 5 | RNVC: 2

13 Dec 1991

5340-12-374-2619
Aircraft Latch Hook

123742619
L521M1057206: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-325-8049
Mounting Bracket

123258049
3962680240: RNCC: 3 | RNVC: 2

11 Jul 1991

5340-12-362-6756
Loop Clamp

123626756
6684921440: RNCC: 3 | RNVC: 2

17 Mar 2004

5340-12-197-0718
Dust And Moisture Seal Protective Cap-Plug

121970718
610U39: RNCC: 3 | RNVC: 2
GPN610U39JNE: RNCC: 5 | RNVC: 2
9560131630: RNCC: 5 | RNVC: 2
GPN610U39: RNCC: 5 | RNVC: 2
610003900: RNCC: 5 | RNVC: 9
GPN610,U39: RNCC: 5 | RNVC: 9
U39: RNCC: 5 | RNVC: 9

15 Sep 1983

5340-12-351-3924
Butt Hinge Leaf

123513924
232198: RNCC: 3 | RNVC: 2
232 198: RNCC: 5 | RNVC: 2

21 Jul 2000

5340-12-348-0373
Mounting Plate

123480373
982 302 44: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-12-122-0470

5340-12-026-6932

5340-12-011-5981

5340-12-357-5019
Angle Bracket

123575019
J28130017-001: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-12-362-6064
Access Cover

123626064
TC-1660-03.200.161: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-12-384-2290
Helical Compression Spring Seat

123842290
F1.1189-30-10-10.00-06: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-12-340-9275
Nonmetallic Bumper

123409275
160-62057-26: RNCC: 3 | RNVC: 2
15160-62057.26: RNCC: 5 | RNVC: 2
160-62057-26: RNCC: 5 | RNVC: 9

4 Jul 1996

5340-12-309-8114
Double Angle Bracket

123098114
A-244820-755: RNCC: 3 | RNVC: 2
A244820-755: RNCC: 5 | RNVC: 2

5 Mar 1987

5340-12-359-2277
Double Angle Bracket

123592277
J27420039-403: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-12-343-1675
Loop Clamp

123431675
588.20-000001-000: RNCC: 3 | RNVC: 2

13 May 1997

5340-12-131-4671
Snap Hook

121314671
NO PRIMARY REF 12-131-4671: RNCC: 3 | RNVC: 2
1651880053: RNCC: 5 | RNVC: 9
18800-60-13: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-389-1686
Mounting Bracket

123891686
5636-0027: RNCC: 3 | RNVC: 2

31 May 2012

5340-12-197-8183
Dust And Moisture Seal Protective Plug

121978183
5801439-32: RNCC: 3 | RNVC: 2
5801439-32: RNCC: 5 | RNVC: 9

24 Nov 1983

5340-12-702-8593
Handle Grip

127028593
53-04045003304: RNCC: 2 | RNVC: 2

5 Jan 1996

5340-12-183-5827
Spring Tension Clip

121835827
C100ZZ10020-000: RNCC: 3 | RNVC: 2

3 May 1980

5340-12-306-4148
Nonmetallic Bumper

123064148
8100243-2000-01: RNCC: 2 | RNVC: 2
4731 2107 00: RNCC: 3 | RNVC: 2
8100243-2000-01: RNCC: 5 | RNVC: 9

28 Feb 1986

5340-12-701-7913
Angle Bracket

127017913
VG95211-ML-127017913: RNCC: 2 | RNVC: 2
5.12.7904.0324.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-326-8349
Rod End Clevis

123268349
1865-010510.16.0: RNCC: 3 | RNVC: 9

31 Oct 1991

5340-12-174-2929
Retaining Strap

121742929
23223-060000.17.0: RNCC: 2 | RNVC: 2
23223-060000-17-0: RNCC: 5 | RNVC: 2
23223-060000.17.0: RNCC: 5 | RNVC: 2
23223-060000.17.0: RNCC: 5 | RNVC: 9
23223-060000-17-0: RNCC: 5 | RNVC: 9

21 Jun 1978

5340-12-305-2625
Angle Bracket

123052625
A-231233-002: RNCC: 3 | RNVC: 2
A231233-002: RNCC: 5 | RNVC: 2

15 Oct 1985

5340-12-366-6518
Mounting Bracket

123666518
946589177: RNCC: 3 | RNVC: 2
3502-100.01.00.006-000: RNCC: 5 | RNVC: 2

19 May 2005

5340-12-144-9493
Turnbuckle Body

121449493
LN29601A04-310: RNCC: 2 | RNVC: 2
18X1X310M8X1LN29601: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-197-8916
Butt Hinge Leaf

121978916
P-233332-017: RNCC: 3 | RNVC: 2
P233332-017: RNCC: 5 | RNVC: 2

30 Nov 1983

5340-12-338-8376
Mounting Bracket

123388376
463-223600.005: RNCC: 3 | RNVC: 9
9896275: RNCC: 5 | RNVC: 9

30 Aug 1995

5340-12-326-7796
Resilient Mount

123267796
DIN95363-B40X30-M8X10-NR55ST: RNCC: 2 | RNVC: 2
MM 2000 T 004: RNCC: 2 | RNVC: 2
01946: RNCC: 3 | RNVC: 2
510031-M8X10.NR55.ST: RNCC: 5 | RNVC: 2
MM 2000 T 004-4: RNCC: 5 | RNVC: 9
VG95363-B40X30-M8X10-NR55ST: RNCC: 5 | RNVC: 9
MM 2000 T 004: RNCC: 5 | RNVC: 9
01946: RNCC: 5 | RNVC: 9

24 Oct 1991

5340-12-177-4071
Mounting Bracket

121774071
2300002-041000.007: RNCC: 2 | RNVC: 2
2300002-041000.007: RNCC: 3 | RNVC: 2
2300002-041000-007: RNCC: 5 | RNVC: 9
2300002-041000.007: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-350-3632
Access Cover

123503632
105-21502.25: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-12-379-2220
Mechanical Stop

123792220
1233736: RNCC: 3 | RNVC: 2

6 Jul 2009

5340-12-349-1905
Metal Grille

123491905
88521 15476: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-317-9046
Double Angle Bracket

123179046
1121-70510.05: RNCC: 3 | RNVC: 2

24 May 1989

5340-12-359-6582
Nonmetallic Bumper

123596582
9473250044: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-12-026-8332

5340-12-162-1833
An Scharnierlappen

5340-12-162-1835
An Scharnierlappen

5340-12-166-1662
Haken- Griff

5340-12-135-7285
Spannschlosz

5340-12-121-0085
Band- Scharnier

5340-12-122-0369
Griffstueck

5340-12-122-7014
Spannschloszkoerper

5340-12-166-1668
Verbindungs Platte

5340-12-360-1544
Mounting Bracket

123601544
9425403373: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-352-9837
Angle Bracket

123529837
54106754116: RNCC: 3 | RNVC: 2
54.1067.541.16: RNCC: 5 | RNVC: 2

16 Jan 2001

5340-12-358-0840
Mechanical Stop

123580840
2500262-000000.022.0: RNCC: 2 | RNVC: 2
2500262-000000.022.0: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-12-312-5423
Lock-Release Lever

123125423
2300194-181200.005: RNCC: 2 | RNVC: 2
2300194-181200.005: RNCC: 3 | RNVC: 2
9843541: RNCC: 5 | RNVC: 9
2300194-181200.005: RNCC: 5 | RNVC: 9
2300194-181200.005: RNCC: 5 | RNVC: 9

15 Jan 1988

5340-12-329-3876
Loop Clamp

123293876
DIN3016-1-D1-10X20-W5-CR: RNCC: 2 | RNVC: 2
RSGU1.10/20-W5: RNCC: 3 | RNVC: 2
DIN3016-D1-10X20-W5: RNCC: 3 | RNVC: 2
RSGU1.10/20W5: RNCC: 5 | RNVC: 2
50008667-4: RNCC: 5 | RNVC: 9
DIN3016-D1-10X20-W5: RNCC: 5 | RNVC: 9
DIN3016-D1-10X20-W3-1: RNCC: 5 | RNVC: 9

15 Aug 1992

5340-12-183-9345
Spring Loaded Cylinder Fastener

121839345
5800166-25: RNCC: 2 | RNVC: 2
5800166-25: RNCC: 5 | RNVC: 2

3 Jun 1980

5340-12-314-5913
Access Cover

123145913
512214-0209.000: RNCC: 3 | RNVC: 2
512214-0209: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-12-348-8928
Webbing Strap

123488928
200.0504.04.0000: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-371-7640
Electronic Equipment Hardware Kit

123717640
2G212AA001-6000: RNCC: 3 | RNVC: 2

14 May 2007

5340-12-310-2662
Retaining Strap

123102662
1201060: RNCC: 3 | RNVC: 2

30 Apr 1987

5340-12-313-2528
Dust And Moisture Seal Protective Cap

123132528
200370: RNCC: 3 | RNVC: 2
23K26 0008 01.001: RNCC: 5 | RNVC: 2

16 Mar 1988

5340-12-175-6267
Detent Plunger

121756267
CU402098B: RNCC: 3 | RNVC: 2
CU 402 098 B: RNCC: 5 | RNVC: 2
CU402098B: RNCC: 5 | RNVC: 2
CU402098B: RNCC: 5 | RNVC: 2
CU 402 098 B: RNCC: 5 | RNVC: 2
CU 402 098 B: RNCC: 5 | RNVC: 2

10 Oct 1978

5340-12-359-7218
Angle Bracket

123597218
2500261-820110.000.0: RNCC: 2 | RNVC: 2
2500261-820110.000.0: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-320-2113
Lock-Release Lever

123202113
1422003067: RNCC: 3 | RNVC: 2
0130 4740: RNCC: 5 | RNVC: 2
01304740EY0147-17: RNCC: 5 | RNVC: 2
4073800: RNCC: 5 | RNVC: 2

19 Dec 1989

5340-12-304-5652
Lock-Release Lever

123045652
6200001-008: RNCC: 2 | RNVC: 2
T61221: RNCC: 3 | RNVC: 2
6200001-008: RNCC: 5 | RNVC: 2
6200001-008: RNCC: 5 | RNVC: 2
6200001-008: RNCC: 5 | RNVC: 9

31 Jul 1985

5340-12-380-0347
Angle Bracket

123800347
242-2128-04-00-70: RNCC: 3 | RNVC: 2

21 Sep 2009

5340-12-348-1590
Double Angle Bracket

123481590
23302-034000.01: RNCC: 2 | RNVC: 2
2118760: RNCC: 3 | RNVC: 2

26 Apr 1999

5340-12-305-1224
Rod End Connector

123051224
5801759-141000.001: RNCC: 2 | RNVC: 2
5801759-141000.001: RNCC: 3 | RNVC: 2
5801759-141000.001: RNCC: 5 | RNVC: 9

27 Sep 1985

5340-12-323-8781
Electrical-Mechanical Equipment Post

123238781
40372-008: RNCC: 3 | RNVC: 2
40372-008: RNCC: 5 | RNVC: 9

3 Jan 1991

5340-12-320-2204
Double Angle Bracket

123202204
NO PRIMARY REF 12-320-2204: RNCC: 3 | RNVC: 2
5802106-206000.01: RNCC: 5 | RNVC: 9
5802106-206000.01: RNCC: 5 | RNVC: 9

19 Dec 1989

5340-12-123-4003
Retaining Strap

121234003
81974010075: RNCC: 3 | RNVC: 2
81974010035: RNCC: 5 | RNVC: 2
81.97401-0035: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-358-9374
Helical Compression Spring Retainer

123589374
E3-2029030: RNCC: 3 | RNVC: 2

2 Dec 2002

5340-12-145-1942
Webbing Strap

121451942
5800231-57080: RNCC: 2 | RNVC: 2
5800231-57080: RNCC: 3 | RNVC: 2
5800231-57080: RNCC: 5 | RNVC: 9
5800231-57080: RNCC: 5 | RNVC: 9
000-A1-20X2,0X410-PE-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-187-7071
Retaining Strap

121877071
5562077/4: RNCC: 3 | RNVC: 2
5562077-4: RNCC: 5 | RNVC: 2

29 Apr 1981

5340-12-354-3047
Access Cover

123543047
2500284-231020.001.0: RNCC: 3 | RNVC: 2

29 Jun 2001

5340-12-392-4873
Mounting Bracket

123924873
2500310-060000.006.0: RNCC: 2 | RNVC: 2
2500310-060000.006.0: RNCC: 3 | RNVC: 2

12 Jun 2013

5340-12-701-7951
Angle Bracket

127017951
VG95211-ML-127017951: RNCC: 2 | RNVC: 2
5.12.8102.2300.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7023
Angle Bracket

127017023
VG95211-ML-127017023: RNCC: 2 | RNVC: 2
5.12.7240.1172.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-387-9218
Plug Button

123879218
SFK-804-0300-001-9790: RNCC: 3 | RNVC: 2
188117: RNCC: 5 | RNVC: 2
19 00 186 FIG.1-7/8: RNCC: 5 | RNVC: 9

9 Feb 2012

5340-12-341-1509
Angle Bracket

123411509
P-297201-459: RNCC: 3 | RNVC: 2
P297201-459: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-12-313-8900
Resilient Mount

123138900
60165003-C-M20: RNCC: 3 | RNVC: 2
E1N 3340-03: RNCC: 3 | RNVC: 2
00.4.632.0075: RNCC: 5 | RNVC: 2
E1N3340-03: RNCC: 5 | RNVC: 2
VG95365-D9-NR-AMST: RNCC: 5 | RNVC: 9

18 May 1988

5340-12-342-4492
Webbing Strap

123424492
A 1326-5000: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-12-319-6422
Headless Straight Rod

123196422
504332: RNCC: 3 | RNVC: 2

20 Oct 1989

5340-12-315-6059
Loop Clamp

123156059
06791020: RNCC: 3 | RNVC: 9

11 Nov 1988

5340-12-338-8870
Angle Bracket

123388870
4900319-100100.00: RNCC: 2 | RNVC: 2
4900319-100100.00: RNCC: 3 | RNVC: 2
4900319-100100.00: RNCC: 5 | RNVC: 2

5 Sep 1995

5340-12-370-0407
Dust And Moisture Seal Protective Cap

123700407
E32345-00: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-12-313-6816
Plug Button

123136816
024035: RNCC: 3 | RNVC: 2

26 Apr 1988

5340-12-335-0251
Permanent Magnet

123350251
16148: RNCC: 3 | RNVC: 2

12 Jul 1994

5340-12-198-1008
Bow Handle

121981008
582B802: RNCC: 3 | RNVC: 2
3098150836: RNCC: 5 | RNVC: 2
582K0436: RNCC: 5 | RNVC: 2

20 Dec 1983

5340-12-192-9534
Spring Tension Clip

121929534
81976402000: RNCC: 3 | RNVC: 2
81.97640.2000: RNCC: 5 | RNVC: 2

7 Jun 1982

5340-12-352-7887
Strap Fastener Loop

123527887
02.2011.01: RNCC: 3 | RNVC: 2

16 Dec 2000

5340-12-353-7078
Manual Control Handle

123537078
49005021900: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-393-0441
Mechanic Equipment Hardware Kit

123930441
41298956: RNCC: 3 | RNVC: 2

1 Aug 2013

5340-12-135-7266

5340-12-125-5108

5340-12-330-1628
Access Cover

123301628
2 0111 7391: RNCC: 3 | RNVC: 2
2.0111.7391: RNCC: 5 | RNVC: 2

10 Nov 1992

5340-12-144-8732
Butt Hinge Leaf

121448732
B25X3X128HAN16515W3355-7: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-302-5521
Mending Plate

123025521
YK03220177: RNCC: 3 | RNVC: 2
03220177: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 22 0177: RNCC: 5 | RNVC: 9

11 Jan 1985

5340-12-384-9759
Spacing Threaded Standoff

123849759
5.35.410: RNCC: 3 | RNVC: 2

14 Apr 2011

5340-12-318-2844
Beam Gripping Clamp

123182844
04-941.1: RNCC: 3 | RNVC: 2

27 Jun 1989

5340-12-312-9037
Mounting Bracket

123129037
5801984-980610.000.0: RNCC: 2 | RNVC: 2
5801984-980610.000.0: RNCC: 3 | RNVC: 2

18 Feb 1988

5340-12-394-2099
Cover Retainer

123942099
1-25: RNCC: 3 | RNVC: 2
1-25: RNCC: 5 | RNVC: 2

11 Nov 2013

5340-12-026-6942

5340-12-319-4793
Mending Plate

123194793
503646: RNCC: 3 | RNVC: 2
503646: RNCC: 5 | RNVC: 9

5 Oct 1989

5340-12-313-0697
Retaining Strap

123130697
T2305027: RNCC: 3 | RNVC: 2

2 Mar 1988

5340-12-317-2233

5340-12-130-4751
Expansion Plug

121304751
DIN470-28-ST-PHR: RNCC: 2 | RNVC: 2
28DIN470PHR: RNCC: 5 | RNVC: 2
28DIN470PHRE: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-155-6960
Headless Straight Rod

121556960
NO PRIMARY REF 12-155-6960: RNCC: 3 | RNVC: 2
V22-1T4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-390-6344
Section Block Clamp

123906344
316934: RNCC: 3 | RNVC: 2
2170-07-15-02/39: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-12-171-0687
Case Corner

121710687
2837201-10040-02: RNCC: 3 | RNVC: 2

5 Sep 1977

5340-12-368-1338
Angle Bracket

123681338
5161-360000B02B: RNCC: 2 | RNVC: 2
5161-360000B02B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-702-1417
Mounting Bracket

127021417
VG95211-ML-127021417: RNCC: 2 | RNVC: 2
30.6100.90: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-166-0527
Mending Plate

121660527
8372360040: RNCC: 3 | RNVC: 2
4798487: RNCC: 5 | RNVC: 2
4798-487: RNCC: 5 | RNVC: 2

29 Jul 1976

5340-12-155-9131
Loop Clamp

121559131
100298-110.01: RNCC: 2 | RNVC: 2
100298-110-01: RNCC: 3 | RNVC: 2
100298-110-01: RNCC: 5 | RNVC: 2
100298-110.01: RNCC: 5 | RNVC: 9
100298-110-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-383-3371
Bow Handle

123833371
2000328: RNCC: 3 | RNVC: 2
SK778M6-236000.006.0: RNCC: 5 | RNVC: 2
4617510070: RNCC: 5 | RNVC: 2

7 Oct 2010

5340-12-312-8398
Loop Clamp

123128398
DIN3015-LC-K-3R-20-PP-W1: RNCC: 2 | RNVC: 2
HRL3C20PP STMBL: RNCC: 3 | RNVC: 2
RAPR1-320: RNCC: 3 | RNVC: 2
SP320PP-LI: RNCC: 3 | RNVC: 2
DIN3015-LC3R-20PP-W1-K: RNCC: 5 | RNVC: 2
SP320PP-LI: RNCC: 5 | RNVC: 2
SP320PPLI: RNCC: 5 | RNVC: 2
1041099: RNCC: 5 | RNVC: 2
RAPR1-320: RNCC: 5 | RNVC: 2

10 Feb 1988

5340-12-182-0214
Clamp Bolt Assembly

121820214
V3SD 18101-3: RNCC: 3 | RNVC: 2
SD-V18101-3: RNCC: 5 | RNVC: 2
SDV18101-3: RNCC: 5 | RNVC: 2
V3SD18101-3: RNCC: 5 | RNVC: 2

7 Jan 1980

5340-12-168-5686
Resilient Mount

121685686
DIN95363-C15X15-NR60ST: RNCC: 2 | RNVC: 2
1.15.15.2.60NR/ST: RNCC: 5 | RNVC: 2
1.15.15.2.60NRST: RNCC: 5 | RNVC: 2
811.020.015.015.04.NR60.ST: RNCC: 5 | RNVC: 2
81120-15X15-M4.NR60.ST: RNCC: 5 | RNVC: 2
5218060.60: RNCC: 5 | RNVC: 2
5218060/11MN60: RNCC: 5 | RNVC: 2
VG95363-C15X15-NR60ST: RNCC: 5 | RNVC: 9
VG95363C15X15NR60ST: RNCC: 5 | RNVC: 9
521806015: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-320-6888
Angle Bracket

123206888
P-230234-019: RNCC: 3 | RNVC: 2
P230234-019: RNCC: 5 | RNVC: 2

7 Feb 1990

5340-12-332-7821
Expansion Plug

123327821
DIN443-B20X5-1.4301: RNCC: 2 | RNVC: 2
DIN443 B20X5-CRN1189: RNCC: 5 | RNVC: 9

17 Sep 1993

5340-12-392-0768
Dust And Moisture Seal Protective Cap-Plug

123920768
SPF14.7427/BR: RNCC: 3 | RNVC: 2

2 May 2013

5340-12-340-5483
Loop Clamp

123405483
DIN3015-S-KP-3-R-40-PA6: RNCC: 2 | RNVC: 2
RCNR-340: RNCC: 3 | RNVC: 2
5040PA: RNCC: 3 | RNVC: 2
5040-PA: RNCC: 5 | RNVC: 2
DIN3015-S-KP-3-R-40-PA: RNCC: 5 | RNVC: 2
90 962 3105: RNCC: 5 | RNVC: 2
909623105: RNCC: 5 | RNVC: 2
5040PA: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-384-3826
Butt Hinge Leaf

123843826
SK1239-174000.002.0: RNCC: 3 | RNVC: 2

18 Feb 2011

5340-12-702-4195
Mounting Bracket

127024195
VG95211-ML-127024195: RNCC: 2 | RNVC: 2
5.12.7070.1220.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-340-8893
Access Cover

123408893
2500253-199000.000.0: RNCC: 2 | RNVC: 2
2500253-199000.000.0: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-12-316-9684
Dust And Moisture Seal Protective Cap

123169684
3WP4E17: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-322-8089
Plain Solid Disk

123228089
8470 032 147: RNCC: 3 | RNVC: 2
8470032147: RNCC: 5 | RNVC: 2
8470032147: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-159-4452

5340-12-185-9957
Nonmetallic Bumper

121859957
03569000: RNCC: 3 | RNVC: 2
03569000-504: RNCC: 5 | RNVC: 9

15 Nov 1980

5340-12-173-0358
Spring Tension Clip

121730358
370-797: RNCC: 3 | RNVC: 2
370.797: RNCC: 3 | RNVC: 2
1008-2454-0001: RNCC: 5 | RNVC: 2
2500073-1507: RNCC: 5 | RNVC: 2
2500073-1507: RNCC: 5 | RNVC: 9

15 Mar 1978

5340-12-337-9858
Access Cover

123379858
230-102.62: RNCC: 3 | RNVC: 2
PK-HH-143A: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-178-9206
Helical Compression Spring Seat

121789206
0243-595: RNCC: 3 | RNVC: 2
1044189: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-311-2145
Retaining Band

123112145
5800573-1194: RNCC: 3 | RNVC: 2

5 Aug 1987

5340-12-318-1214
Snap Hook

123181214
100332-014422: RNCC: 3 | RNVC: 2
100332-54112-00: RNCC: 5 | RNVC: 2
100332-014422: RNCC: 5 | RNVC: 9

13 Jun 1989

5340-12-364-3874
Lock-Release Lever

123643874
06461-2082X60: RNCC: 3 | RNVC: 2
NLM06461-2082X60: RNCC: 5 | RNVC: 2

18 Sep 2004

5340-12-389-2397
Angle Bracket

123892397
136-040.01-037: RNCC: 3 | RNVC: 2

12 Jun 2012

5340-12-701-9942
Loop Clamp

127019942
VG95211-ML-127019942: RNCC: 2 | RNVC: 2
155N464-55: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-3703
Rod End Connector

127013703
VG95211-ML-127013703: RNCC: 2 | RNVC: 2
5.12.5303.0720.00: RNCC: 3 | RNVC: 2
0501400004399: RNCC: 5 | RNVC: 2
0501403080299: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-170-2504
Section Block Clamp

121702504
PAN4274-10: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-313-4459
Ball Socket Seat

123134459
2000 2220 011: RNCC: 3 | RNVC: 2

31 Mar 1988

5340-12-388-4485
Angle Bracket

123884485
122W162810.021.0: RNCC: 2 | RNVC: 2
122W162810.021.0: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-387-0285
Bumper

123870285
XP52799100424: RNCC: 3 | RNVC: 2

27 Oct 2011

5340-12-189-1846
Mounting Plate

121891846
8331596740: RNCC: 3 | RNVC: 2

9 Sep 1981

5340-12-317-3574
Access Cover

123173574
0241 4395: RNCC: 3 | RNVC: 2
4083740: RNCC: 5 | RNVC: 2

31 Mar 1989

5340-12-180-9762
Strap Hinge

121809762
4-114490: RNCC: 3 | RNVC: 2

15 Oct 1979

5340-12-366-3323
Mounting Plate

123663323
P-085065-763: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-12-327-3829
Nonmetallic Bumper

123273829
23176-261000.08.0: RNCC: 2 | RNVC: 2
98603601: RNCC: 3 | RNVC: 2
23176-261000.08.0: RNCC: 3 | RNVC: 2
23176-261000.08.0: RNCC: 5 | RNVC: 2
98603601: RNCC: 5 | RNVC: 2

16 Jan 1992

5340-12-337-1164
Mending Plate

123371164
2300122-990000.001.0: RNCC: 2 | RNVC: 2
2300122-990000.001.0: RNCC: 3 | RNVC: 2
2300122-990000.001.0: RNCC: 5 | RNVC: 2

19 Jan 1995

5340-12-348-2524
Mounting Bracket

123482524
1682-180050.000.0: RNCC: 2 | RNVC: 2
1682-180050.000.0: RNCC: 3 | RNVC: 2

17 May 1999

5340-12-337-9039
Nonmetallic Bumper

123379039
570526977: RNCC: 3 | RNVC: 2
11.005.05.011.4: RNCC: 5 | RNVC: 2

2 May 1995

5340-12-166-6080
Helical Compression Spring Retainer

121666080
WW406970D: RNCC: 3 | RNVC: 9
WW 406 970 D: RNCC: 5 | RNVC: 2
WW406970D: RNCC: 5 | RNVC: 2
WW 406 970 D: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-358-8608
Mounting Plate

123588608
2481-392000.011.0: RNCC: 2 | RNVC: 2
2481-392000.011.0: RNCC: 3 | RNVC: 2

22 Nov 2002

5340-12-386-6088
Webbing Strap

123866088
RANCHER: RNCC: 3 | RNVC: 2

15 Sep 2011

5340-12-375-9619
Expansion Shield

123759619
050357: RNCC: 3 | RNVC: 2
4006209503577: RNCC: 5 | RNVC: 2
N8X100Z: RNCC: 5 | RNVC: 2

24 Jul 2008

5340-12-185-8691
Pipe Bracket

121858691
3576423: RNCC: 3 | RNVC: 2
3576423: RNCC: 5 | RNVC: 2

6 Nov 1980

5340-12-180-5045
Dust And Moisture Seal Protective Plug

121805045
3819970386: RNCC: 3 | RNVC: 2
7005-73: RNCC: 5 | RNVC: 2
9151568080: RNCC: 5 | RNVC: 2

14 Sep 1979

5340-12-322-1001
Mounting Bracket

123221001
42024949: RNCC: 3 | RNVC: 2
42024949ED5052-81: RNCC: 5 | RNVC: 2

24 Jul 1990

5340-12-344-2225
Protection Bellows

123442225
D37LHQ400: RNCC: 3 | RNVC: 2

1 Oct 1997

5340-12-347-8818
Door Button

123478818
1000-50: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-12-339-1056
Hand Crank

123391056
239 751-05001: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-12-393-4555
Dust And Moisture Seal Protective Cap-Plug

123934555
160-72085-06: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-12-303-7860
Friction Catch

123037860
80001895: RNCC: 3 | RNVC: 2
80001895EZ5511-29: RNCC: 5 | RNVC: 2

26 Apr 1985

5340-12-360-6861
Spring Tension Clip

123606861
1873-090000.007.0: RNCC: 3 | RNVC: 2

30 Jun 2003

5340-12-143-0872
Handwheel

121430872
25704-191400.02.0: RNCC: 2 | RNVC: 2
25704-191400.02.0: RNCC: 3 | RNVC: 2
25704-191400-02-0: RNCC: 5 | RNVC: 2
25704-191400-02-0: RNCC: 5 | RNVC: 9
25704-191400.02.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-9778
Angle Bracket

123229778
702-146150-000-0: RNCC: 3 | RNVC: 2

15 Oct 1990

5340-12-700-8586
Threaded End Tensioning Tie Rod

127008586
VG95211-ML-127008586: RNCC: 2 | RNVC: 2
155N1220-22-2-638: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-4246
Mechanical Stop

123584246
4000A-310000.012.0: RNCC: 2 | RNVC: 2
4000A-310000.012.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-338-8054
Split Tubular Clip

123388054
9894588: RNCC: 3 | RNVC: 9
463-190111.000: RNCC: 5 | RNVC: 9

25 Aug 1995

5340-12-370-1407
Mounting Plate

123701407
865340380: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-12-168-7661
Detent Plunger

121687661
09.030.51.173: RNCC: 3 | RNVC: 2
09-030-51-173: RNCC: 5 | RNVC: 2

6 Apr 1977

5340-12-177-4634
Manual Control Handle

121774634
2300002-181362.000: RNCC: 2 | RNVC: 2
2300002-181362.000: RNCC: 3 | RNVC: 2
2300002-181362: RNCC: 5 | RNVC: 9

1 Feb 1979

5340-12-338-7487
Webbing Strap

123387487
9897966: RNCC: 3 | RNVC: 9
495-4127.00: RNCC: 5 | RNVC: 9

22 Aug 1995

5340-12-346-0055
Manual Control Lever

123460055
2.0172: RNCC: 3 | RNVC: 2

28 May 1998

5340-12-346-1419
Butt Hinge

123461419
9892170: RNCC: 3 | RNVC: 9
463-630400.005: RNCC: 5 | RNVC: 9

18 Jun 1998

5340-12-359-6392
Mounting Bracket

123596392
4376200014: RNCC: 3 | RNVC: 2

24 Feb 2003

5340-12-371-5683
Butt Hinge Leaf

123715683
SK861-182053.001.0: RNCC: 3 | RNVC: 2
1705607: RNCC: 5 | RNVC: 9

19 Apr 2007

5340-12-192-1345
Expansion Shield

121921345
PA4M6X13,5: RNCC: 3 | RNVC: 2
FV2023548/1: RNCC: 5 | RNVC: 2
2594842: RNCC: 5 | RNVC: 2
59484: RNCC: 5 | RNVC: 2
PA4M6/13,5: RNCC: 5 | RNVC: 2
PA4M6X13-5: RNCC: 5 | RNVC: 2
2594841: RNCC: 5 | RNVC: 9

24 Mar 1982

5340-12-328-0433
Webbing Strap

123280433
5802161-201360.00: RNCC: 2 | RNVC: 2
5802161-201360.00: RNCC: 3 | RNVC: 2
000-C2-20X2,0X345-PE-RAL6031: RNCC: 6 | RNVC: 9

1 Apr 1992

5340-12-198-1131
Mending Plate

121981131
5801411-33112.002: RNCC: 3 | RNVC: 2
5801411-33112.002: RNCC: 5 | RNVC: 9

21 Dec 1983

5340-12-406-7864

5340-12-378-1820
Turnbuckle Body

123781820
233505402: RNCC: 3 | RNVC: 2

18 Mar 2009

5340-12-146-8693

5340-12-183-2524
Angle Bracket

121832524
51974800330: RNCC: 3 | RNVC: 2
5000498386: RNCC: 5 | RNVC: 2
5000498386: RNCC: 5 | RNVC: 9

28 Mar 1980

5340-12-308-2898
Mending Plate

123082898
5802017-707300.05: RNCC: 2 | RNVC: 2
5802017-707300.05: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-180-5886
Angle Bracket

121805886
81974800855: RNCC: 3 | RNVC: 2

19 Sep 1979

5340-12-179-1807
Retaining Strap

121791807
6172493: RNCC: 3 | RNVC: 2

15 Jun 1979

5340-12-157-2838
Electrical-Mechanical Equipment Post

121572838
773-204-33: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-347-6031
Mounting Bracket

123476031
8854 131-111: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-309-5940
Flush Lock

123095940
NO PRIMARY REF 12-309-5940: RNCC: 3 | RNVC: 2
101: RNCC: 5 | RNVC: 9

6 Feb 1987

5340-12-134-0303
Abstandsstueck

121340303
57-095: RNCC: 3 | RNVC: 2
090944010000: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-122-3559
Nonmetallic Bumper

121223559
837-3042420165: RNCC: 3 | RNVC: 2
3042420165: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-332-1343
Spring Tension Clip

123321343
1H0868246A: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-181-2913
Retaining Strap

121812913
0287 5788: RNCC: 3 | RNVC: 2
2875788: RNCC: 5 | RNVC: 2
2875788KZ0704-79: RNCC: 5 | RNVC: 2

12 Nov 1979

5340-12-337-9326
Mounting Bracket

123379326
4618800714: RNCC: 3 | RNVC: 2
461 880 07 14: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-183-7759
Double Angle Bracket

121837759
181871543A: RNCC: 3 | RNVC: 2

20 May 1980

5340-12-380-0358
Section Block Clamp

123800358
389415: RNCC: 3 | RNVC: 2

21 Sep 2009

5340-12-331-8448
Angle Bracket

123318448
160-740716: RNCC: 3 | RNVC: 2
160-740716: RNCC: 5 | RNVC: 9

28 Jun 1993

5340-12-344-3615
Helical Compression Spring Seat

123443615
3 410 501 603: RNCC: 3 | RNVC: 2
3410501603: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-354-3915
Schlingen- Klemme

5340-12-354-3916
Schlingen- Klemme

5340-12-310-6524
Angle Bracket

123106524
P-243860-005: RNCC: 3 | RNVC: 2
P243860-005: RNCC: 5 | RNVC: 2

12 Jun 1987

5340-12-306-7559
Angle Bracket

123067559
P-243973-752: RNCC: 3 | RNVC: 2
P243973-752: RNCC: 5 | RNVC: 2

27 Mar 1986

5340-12-377-9316
Loop Clamp

123779316
DIN3016-1-D1-20X25-W3-EPDM: RNCC: 2 | RNVC: 2
41036613: RNCC: 5 | RNVC: 2

26 Feb 2009

5340-12-192-9246
Bow Handle

121929246
582K0903-000-00.1: RNCC: 3 | RNVC: 2
4606800070: RNCC: 5 | RNVC: 2
46068000709007: RNCC: 5 | RNVC: 2
721 1 87 020 2: RNCC: 5 | RNVC: 9

7 Jun 1982

5340-12-306-0739
Double Angle Bracket

123060739
5801984-200634.002.0: RNCC: 2 | RNVC: 2
5801984-200634.002.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-368-9777
Angle Bracket

123689777
2500238-041000.015.0: RNCC: 2 | RNVC: 2
2500238-041000.015.0: RNCC: 3 | RNVC: 2

10 May 2006

5340-12-188-0456
Mortise Bolt

121880456
2300109-183220.005.0: RNCC: 2 | RNVC: 2
2300109-183220.005.0: RNCC: 3 | RNVC: 2
2300109-183220.005.0: RNCC: 3 | RNVC: 2
2300109-183220-005-0: RNCC: 5 | RNVC: 2
2300109-183220-005-0: RNCC: 5 | RNVC: 2
2300109-183220-005-0: RNCC: 5 | RNVC: 9
2300109-183220.005.0: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-322-0501
Elastic Strap

123220501
7300035-3100: RNCC: 2 | RNVC: 2
4.452-004.0: RNCC: 3 | RNVC: 2
TL7320-0061 LFD.NR.11: RNCC: 5 | RNVC: 9
4.452-004: RNCC: 5 | RNVC: 9

19 Jul 1990

5340-12-151-1958
Snap Hook

121511958
VG85266D180: RNCC: 2 | RNVC: 2
VG85266-D180-ROH: RNCC: 3 | RNVC: 2
B180NM587-B18: RNCC: 3 | RNVC: 2
Y245-180X18-1.3952.9 VG85266D180: RNCC: 3 | RNVC: 9
DIN5299-D180BK-1.3952.9: RNCC: 5 | RNVC: 2
D180DIN5299-1.3952.9: RNCC: 5 | RNVC: 2
B180VG85266: RNCC: 5 | RNVC: 9
245-180X18-1.3952.9 VG85266D180: RNCC: 5 | RNVC: 9
B180NM587-B18: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-187-7320
Double Angle Bracket

121877320
2300109-970486.001.0: RNCC: 3 | RNVC: 2
2300109-970486.001.0: RNCC: 3 | RNVC: 2
2300109-970486-001-0: RNCC: 5 | RNVC: 2
2300109-970486-001-0: RNCC: 5 | RNVC: 2
2300109-970486-001-0: RNCC: 5 | RNVC: 9
2300109-970486.001.0: RNCC: 5 | RNVC: 9

4 May 1981

5340-12-300-0702
Lock-Release Lever

123000702
5045644: RNCC: 3 | RNVC: 2
50.4.5644: RNCC: 5 | RNVC: 2
50-4-5644: RNCC: 5 | RNVC: 2

29 Jun 1984

5340-12-332-9353
Loop Clamp

123329353
1207 6824: RNCC: 3 | RNVC: 2
12076824EE0112-90: RNCC: 5 | RNVC: 2
3.604.0.977.001.4: RNCC: 5 | RNVC: 9
1207 6824: RNCC: 5 | RNVC: 9
12076824: RNCC: 5 | RNVC: 9

7 Oct 1993

5340-12-300-2602
Lock-Release Lever

123002602
5801111-12.001: RNCC: 3 | RNVC: 2
5801111-12-001: RNCC: 5 | RNVC: 2

19 Jul 1984

5340-12-348-8611
Mounting Plate

123488611
245/7383-02-00-32: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-12-155-4998
Spring Tension Clip

121554998
160-72753-02: RNCC: 3 | RNVC: 2
160-72753-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-9082
Double Angle Bracket

121909082
2300147-220000.035.0: RNCC: 2 | RNVC: 2
2300147-220000.035.0: RNCC: 3 | RNVC: 2
2300147-220000-035-0: RNCC: 5 | RNVC: 9
2300147-220000.035.0: RNCC: 5 | RNVC: 9

22 Dec 1981

5340-12-702-6106
Threaded End Tensioning Tie Rod

127026106
VG95211-ML-127026106: RNCC: 2 | RNVC: 2
5849A-25CH1,5-385: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-4243
Angle Bracket

127024243
VG95211-ML-127024243: RNCC: 2 | RNVC: 2
5.12.7207.1212.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-190-6826
Electrical-Mechanical Equipment Post

121906826
NO PRIMARY REF 12-190-6826: RNCC: 3 | RNVC: 2
7801 132878: RNCC: 5 | RNVC: 9
7801132878: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-362-8571
Mounting Plate

123628571
70367-001: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-12-342-0512
Dust And Moisture Seal Protective Plug

123420512
1052-0123: RNCC: 3 | RNVC: 2
078353150: RNCC: 5 | RNVC: 2

4 Dec 1996

5340-12-357-3908
Mending Plate

123573908
J32320341-001: RNCC: 3 | RNVC: 2

17 Jun 2002

5340-12-352-6637
Loop Clamp

123526637
038 460 012 018: RNCC: 3 | RNVC: 2
81.95312-6013: RNCC: 5 | RNVC: 2
81953126013: RNCC: 5 | RNVC: 2

5 Dec 2000

5340-12-149-4609
Loop Clamp

121494609
1216 8440: RNCC: 3 | RNVC: 2
12168440: RNCC: 5 | RNVC: 9
6-420-0-977-022-5: RNCC: 5 | RNVC: 9
6.420.0.977.022.5: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-4174
Angle Bracket

121984174
4020781041: RNCC: 3 | RNVC: 2
4020781041: RNCC: 5 | RNVC: 2

26 Jan 1984

5340-12-344-7206
Dust And Moisture Seal Protective Plug

123447206
5551840065: RNCC: 3 | RNVC: 2

2 Dec 1997

5340-12-333-4544
Sealing Plug Assembly

123334544
0418 2791: RNCC: 3 | RNVC: 2
04182791ED0148-05: RNCC: 5 | RNVC: 2
280.14.0108: RNCC: 5 | RNVC: 2

17 Dec 1993

5340-12-340-2218
Dust And Moisture Seal Protective Plug

123402218
463-630720.001: RNCC: 3 | RNVC: 9
9892418: RNCC: 5 | RNVC: 9

15 Mar 1996

5340-12-359-1869
Mounting Plate

123591869
4656 301 018: RNCC: 3 | RNVC: 2
330817A1: RNCC: 5 | RNVC: 2

8 Jan 2003

5340-12-362-8349
Mounting Plate

123628349
9261272100: RNCC: 3 | RNVC: 2
926127 2100: RNCC: 5 | RNVC: 2

6 Apr 2004

5340-12-176-4968
Loop Clamp

121764968
1209950044: RNCC: 3 | RNVC: 2

30 Nov 1978

5340-12-300-9841
Luggage Handle

123009841
582A260: RNCC: 3 | RNVC: 2
4067660070: RNCC: 5 | RNVC: 2
582 K 0028: RNCC: 5 | RNVC: 2
582K0028: RNCC: 5 | RNVC: 2

14 Sep 1984

5340-12-404-6894

5340-12-349-5902
Mounting Bracket

123495902
2940.1313: RNCC: 3 | RNVC: 2

7 Dec 1999

5340-12-357-9001
Mounting Bracket

123579001
12224001: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-374-2772
Loop Clamp

123742772
5307723: RNCC: 3 | RNVC: 2

5 Feb 2008

5340-12-300-3143
Leather Strap

123003143
3097900296: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-387-8259
Loop Clamp

123878259
7092777: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-12-193-5840
Nonmetallic Bumper

121935840
16102-5300.08: RNCC: 3 | RNVC: 2
16102-5300.08: RNCC: 5 | RNVC: 9

5 Aug 1982

5340-12-381-9885
Spring Tension Clip

123819885
53.00.47: RNCC: 3 | RNVC: 2

26 Apr 2010

5340-12-181-2866
Vent Plug

121812866
03613600: RNCC: 3 | RNVC: 2
03613600: RNCC: 5 | RNVC: 2
03613600-164: RNCC: 5 | RNVC: 9

9 Nov 1979

5340-12-319-1949
Flare Lock Fastener

123191949
PL-SNI13450PE504S: RNCC: 3 | RNVC: 2
PL-SNI13450PE502S: RNCC: 5 | RNVC: 9

12 Sep 1989

5340-12-325-7584
Schlosz Schluessel

123257584
SCHLUESSEL 4010LI-BD1022: RNCC: 3 | RNVC: 2
BD1022: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-368-0730
Double Angle Bracket

123680730
ED88-0600-00202-043: RNCC: 3 | RNVC: 2

1 Dec 2005

5340-12-339-8298
Mounting Bracket

123398298
2654-330282.00: RNCC: 2 | RNVC: 2
2654-330282.00: RNCC: 3 | RNVC: 2
2654-330 282.00: RNCC: 5 | RNVC: 9
2654-330 282.00: RNCC: 5 | RNVC: 9
2654-330 282.00: RNCC: 5 | RNVC: 9

23 Jan 1996

5340-12-043-5952

5340-12-358-9089
Angle Bracket

123589089
3095421340: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-12-324-9022
Mounting Bracket

123249022
52.2002.003.00: RNCC: 3 | RNVC: 2

8 Apr 1991

5340-12-181-8501
Angle Bracket

121818501
CF 432 045 B: RNCC: 2 | RNVC: 2
CF 432 045 B: RNCC: 3 | RNVC: 2
CF432045B: RNCC: 5 | RNVC: 2
CF 432 045 B: RNCC: 5 | RNVC: 2
CF432045B: RNCC: 5 | RNVC: 2
CF 432 045 B: RNCC: 5 | RNVC: 2
CF432045B: RNCC: 5 | RNVC: 2

21 Dec 1979

5340-12-373-9405
Angle Bracket

123739405
SP06487: RNCC: 2 | RNVC: 2
SP06487: RNCC: 3 | RNVC: 2
50.2.426.0004: RNCC: 5 | RNVC: 2

20 Dec 2007

5340-12-306-0741
Mending Plate

123060741
5801984-980400.002.0: RNCC: 2 | RNVC: 2
5801984-980400.002.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-394-2411
Access Cover

123942411
131Q176500.000.0: RNCC: 2 | RNVC: 2
131Q176500.000.0: RNCC: 3 | RNVC: 2
131Q176500.000.0: RNCC: 5 | RNVC: 2

13 Nov 2013

5340-12-316-6502
Pad Eye

123166502
027-101010-12-0M1: RNCC: 3 | RNVC: 2
027-101010-12-0M1: RNCC: 5 | RNVC: 9

31 Jan 1989

5340-12-321-3096
Mounting Plate

123213096
2500067-102440.01: RNCC: 2 | RNVC: 2
2500067-102440.01: RNCC: 3 | RNVC: 2

3 May 1990

5340-12-350-2186
Spacing Threaded Standoff

123502186
2W132R005-0000.19: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-12-375-7345
Double Angle Bracket

123757345
2300223-240040.00.0: RNCC: 2 | RNVC: 2
2300223-240040.00.0: RNCC: 3 | RNVC: 2

30 Jun 2008

5340-12-304-5535
Angle Bracket

123045535
2989121064: RNCC: 3 | RNVC: 2
2 989 121 064: RNCC: 5 | RNVC: 2

30 Jul 1985

5340-12-354-7681
Spacing Threaded Standoff

123547681
5.04.159: RNCC: 3 | RNVC: 2

23 Aug 2001

5340-12-330-0958
Dust And Moisture Seal Protective Plug

123300958
4337200801: RNCC: 3 | RNVC: 2
4 337 2008 01: RNCC: 5 | RNVC: 2

3 Nov 1992

5340-12-700-9185
Mounting Plate

127009185
2.55.6100.1702.98: RNCC: 3 | RNVC: 2
155.6100-1702: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-326-3793
Mending Plate

123263793
4-182400: RNCC: 3 | RNVC: 2
499261: RNCC: 5 | RNVC: 2

9 Sep 1991

5340-12-190-9966
Bow Handle

121909966
0.053.163.0: RNCC: 3 | RNVC: 2
0-053-163-0: RNCC: 5 | RNVC: 2
0.053.163.0: RNCC: 5 | RNVC: 2

5 Jan 1982

5340-12-168-5468
Helical Compression Spring Retainer

121685468
WW306007G: RNCC: 3 | RNVC: 9
WW306007G: RNCC: 5 | RNVC: 2
WW306007G: RNCC: 5 | RNVC: 2
WW 306 007 G: RNCC: 5 | RNVC: 2
WW 306 007 G: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-371-5893
Retaining Clip

123715893
T881M4033210: RNCC: 2 | RNVC: 2
T881M4033210: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-12-166-0873
Access Cover

121660873
02530: RNCC: 3 | RNVC: 2
02530: RNCC: 5 | RNVC: 9

29 Jul 1976

5340-12-362-2776
Spacing Threaded Standoff

123622776
03.084.66.31.0: RNCC: 3 | RNVC: 2
3KK876: RNCC: 5 | RNVC: 2

2 Feb 2004

5340-12-319-3319
Handwheel

123193319
1700013-30550.00: RNCC: 2 | RNVC: 2
297293: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-12-325-7158
Mending Plate

123257158
701-521630-000-0: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-12-310-3506
Loop Clamp

123103506
38012-0120.03: RNCC: 2 | RNVC: 2
38012-0120.03: RNCC: 3 | RNVC: 2
38012-0120.03: RNCC: 5 | RNVC: 9

13 May 1987

5340-12-311-1415
Strap End Clip

123111415
NO PRIMARY REF 12-311-1415: RNCC: 3 | RNVC: 2
466-50MM: RNCC: 5 | RNVC: 9

30 Jul 1987

5340-12-330-3236
Casement Fastener

123303236
6285MN: RNCC: 3 | RNVC: 2
6285-RECHTS: RNCC: 5 | RNVC: 2
6285-RECHTS-MS: RNCC: 5 | RNVC: 2
6285MS: RNCC: 5 | RNVC: 2

2 Dec 1992

5340-12-329-5486
Webbing Strap

123295486
01808-2-01253-FE300MM-LE1200MM: RNCC: 3 | RNVC: 2
01808-2-01253-L1700MM: RNCC: 5 | RNVC: 2
DIN60060-2-50X300X1200-C1/HAKEN: RNCC: 5 | RNVC: 9
79056/078-1500-300: RNCC: 5 | RNVC: 9

28 Aug 1992

5340-12-385-9753
Access Hole Frame

123859753
2500262-198110.000.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-310-0459
Dust And Moisture Seal Protective Cap

123100459
M12NR.612SCHWARZ: RNCC: 3 | RNVC: 2
1000/1073: RNCC: 3 | RNVC: 2
M12-612: RNCC: 5 | RNVC: 2
100107300: RNCC: 5 | RNVC: 2
GPN1000-1073: RNCC: 5 | RNVC: 2
521202: RNCC: 5 | RNVC: 2
M12NR.610SCHWARZ: RNCC: 5 | RNVC: 9

1 Apr 1987

5340-12-303-2634
Lock-Release Lever

123032634
P-886685-401: RNCC: 3 | RNVC: 2
P886685-401: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-355-3420
Swivel Caster

123553420
31F/125/3LN: RNCC: 3 | RNVC: 2
0580.1853: RNCC: 5 | RNVC: 2

6 Nov 2001

5340-12-192-0085
Nonmetallic Solid Wheel

121920085
4200078-10420.01: RNCC: 2 | RNVC: 2
TG6080-10420.01: RNCC: 3 | RNVC: 2
6080-10420.01: RNCC: 5 | RNVC: 2

22 Mar 1982

5340-12-336-1370
Mounting Bracket

123361370
C-112467: RNCC: 3 | RNVC: 2
C-112 467: RNCC: 5 | RNVC: 2
C112467: RNCC: 5 | RNVC: 2

27 Oct 1994

5340-12-702-2275
Mounting Bracket

127022275
VG95211-ML-127022275: RNCC: 2 | RNVC: 2
30.7614.150: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-301-7666
Metal Runner

123017666
537177-0214.000: RNCC: 3 | RNVC: 2
537177-0214: RNCC: 5 | RNVC: 9
537177-0214.000: RNCC: 5 | RNVC: 9
53 71 77-0214: RNCC: 5 | RNVC: 9
53 71 77-0214: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-12-313-0153
Double Angle Bracket

123130153
P-086147-137: RNCC: 3 | RNVC: 2
P086147-137: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-303-2639
Helical Compression Spring Seat

123032639
P-886670-001: RNCC: 3 | RNVC: 2
P886670-001: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-164-3060
Nonmetallic Bumper

121643060
4039870314: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-183-1679
Loop Clamp

121831679
NX11: RNCC: 3 | RNVC: 2
01243028: RNCC: 5 | RNVC: 2
1243028EZ8976-73: RNCC: 5 | RNVC: 2
16-20N92117V1: RNCC: 5 | RNVC: 2
221-10110: RNCC: 5 | RNVC: 2
502110130: RNCC: 5 | RNVC: 9

25 Mar 1980

5340-12-336-5987
Mounting Bracket

123365987
VG95211-ML-123365987: RNCC: 2 | RNVC: 2
10553602: RNCC: 3 | RNVC: 2

29 Nov 1994

5340-12-361-6378
Angle Bracket

123616378
P-145335-018: RNCC: 3 | RNVC: 2
P145335-018: RNCC: 5 | RNVC: 2
P-145335-018: RNCC: 5 | RNVC: 2

28 Oct 2003

5340-12-387-4666
Protection Bellows

123874666
1008243-22900-002-F: RNCC: 3 | RNVC: 2

21 Dec 2011

5340-12-352-2953
Loop Clamp

123522953
5097606: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-377-3270
Protection Bellows

123773270
4416831208: RNCC: 3 | RNVC: 2

9 Jan 2009

5340-12-010-8514

5340-12-360-9951
Mounting Bracket

123609951
0853 9350.030: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-150-7312

5340-12-352-7546
Angle Bracket

123527546
562 187 18 40: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-12-330-0822
Nonmetallic Bumper

123300822
3660780186: RNCC: 3 | RNVC: 2

30 Oct 1992

5340-12-353-2156
Eye Hook

123532156
16001505: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-356-1490
Webbing Strap

123561490
4617901679: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-123-3588
Retaining Strap

121233588
81974010030: RNCC: 3 | RNVC: 2
00.00430-5927: RNCC: 5 | RNVC: 2
00004305927: RNCC: 5 | RNVC: 2
R5927: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-350-1275
Loop Clamp

123501275
211-15280: RNCC: 3 | RNVC: 2
28C: RNCC: 5 | RNVC: 2

17 Feb 2000

5340-12-701-9863
Angle Bracket

127019863
VG95211-ML-127019863: RNCC: 2 | RNVC: 2
155.9200.16: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-320-4325
Mending Plate

123204325
54.2731.062.10: RNCC: 2 | RNVC: 2
54.2731.062.10: RNCC: 3 | RNVC: 2

15 Jan 1990

5340-12-386-3262
Manual Control Lever

123863262
009-221.352-000: RNCC: 2 | RNVC: 2
009-221.352-000: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-370-0119
Spacing Threaded Standoff

123700119
5803915-201500.05: RNCC: 2 | RNVC: 2
5803915-201500.05: RNCC: 3 | RNVC: 2

5 Sep 2006

5340-12-198-0967
Angle Bracket

121980967
1200096-113100049: RNCC: 2 | RNVC: 2

20 Dec 1983

5340-12-311-6247
Sealing Plug Assembly

123116247
M547202: RNCC: 3 | RNVC: 9
M547202: RNCC: 5 | RNVC: 2

29 Sep 1987

5340-12-382-1744
Mounting Bracket

123821744
5232000540: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-198-5021
Double Angle Bracket

121985021
160-744907: RNCC: 3 | RNVC: 2
160-744907: RNCC: 5 | RNVC: 9

2 Feb 1984

5340-12-338-1435
Angle Bracket

123381435
402 542 51 40: RNCC: 3 | RNVC: 2
4025425140: RNCC: 5 | RNVC: 2

30 May 1995

5340-12-387-8628
Spring Loaded Cylinder Fastener

123878628
7092817: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-382-2228
Buckle

123822228
P112506NM: RNCC: 3 | RNVC: 2

25 May 2010

5340-12-180-8433
Retaining Strap

121808433
03341028: RNCC: 3 | RNVC: 2
3341028EF5049-75: RNCC: 5 | RNVC: 2

8 Oct 1979

5340-12-359-7264
Strap Hinge Leaf

123597264
A2127760700000: RNCC: 3 | RNVC: 2
A2127760700000: RNCC: 5 | RNVC: 2

5 Mar 2003

5340-12-355-4254
Webbing Strap

123554254
4617901879: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-12-360-3251
Mounting Bracket

123603251
3514308200: RNCC: 3 | RNVC: 2
3514308200: RNCC: 5 | RNVC: 2

8 May 2003

5340-12-368-6973

5340-12-136-3328
Retaining Strap

121363328
114A61713E1: RNCC: 3 | RNVC: 2
8390100140: RNCC: 5 | RNVC: 2
114A61713: RNCC: 5 | RNVC: 2
28390100140E0: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-362-6903
Access Cover

123626903
S533M7006211: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-367-1600
Dust And Moisture Seal Protective Cap

123671600
1086136: RNCC: 3 | RNVC: 2

14 Jul 2005

5340-12-326-6159
Helical Compression Spring Retainer

123266159
7470 040 176: RNCC: 3 | RNVC: 2
7470040176: RNCC: 5 | RNVC: 9

15 Oct 1991

5340-12-351-5127
Mending Plate

123515127
4619100113: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-388-6151
Mounting Bracket

123886151
5842030342: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-12-360-1540
Mounting Bracket

123601540
9425244140: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-310-9887
Electrical-Mechanical Equipment Post

123109887
03458000: RNCC: 3 | RNVC: 2

15 Jul 1987

5340-12-092-0457

5340-12-011-0517

5340-12-129-4265
Loop Clamp

121294265
1291310001: RNCC: 3 | RNVC: 2
40310758209: RNCC: 5 | RNVC: 2
40410758209: RNCC: 5 | RNVC: 2
ZBE104-30Z: RNCC: 5 | RNVC: 2
0005470375: RNCC: 5 | RNVC: 2
002-50-007-90: RNCC: 5 | RNVC: 9
1291310001: RNCC: 5 | RNVC: 9
ZBE104-30Z: RNCC: 5 | RNVC: 9
30353339200000: RNCC: 5 | RNVC: 9
9002660300009: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-375-1654
Bumper

123751654
SK012628: RNCC: 3 | RNVC: 2
81.96210-0619: RNCC: 5 | RNVC: 2
81962100619: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-12-314-9394
Retaining Strap

123149394
C39166-A34-C2: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-12-302-7707
Mending Plate

123027707
707281-0011.000: RNCC: 3 | RNVC: 2

29 Jan 1985

5340-12-356-1747
Mounting Bracket

123561747
ED41-0900-00215-126: RNCC: 2 | RNVC: 2
ED41-0900-00215-126: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-143-4870
Nonmetallic Bumper

121434870
3369648EE0154-21: RNCC: 3 | RNVC: 2
0154-21-30-05: RNCC: 5 | RNVC: 2
0336 9648: RNCC: 5 | RNVC: 2
902573301: RNCC: 5 | RNVC: 2
3369648: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-142-8522
Loop Clamp

121428522
RSM10-15/15: RNCC: 3 | RNVC: 2
0009950105: RNCC: 5 | RNVC: 2
RSM10-15-15: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-348-3607
Angle Bracket

123483607
519-120800.10.0: RNCC: 2 | RNVC: 2
519-120800.10.0: RNCC: 3 | RNVC: 2

9 Jun 1999

5340-12-164-6386
Retaining Clip

121646386
681-11750-02: RNCC: 3 | RNVC: 2
681-11750-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-4353
Plug Button

121974353
29424.0-7: RNCC: 3 | RNVC: 2
29424.0: RNCC: 5 | RNVC: 2
17.9999.5091: RNCC: 5 | RNVC: 9

24 Oct 1983

5340-12-357-6075
Mounting Bracket

123576075
P-876036-403: RNCC: 3 | RNVC: 2
P876036-403: RNCC: 5 | RNVC: 2

5 Jul 2002

5340-12-166-2253
Resilient Mount

121662253
5318003/11MN55: RNCC: 3 | RNVC: 2
U-LAGER 25.NR55.ST: RNCC: 3 | RNVC: 2
U-LAGER 25 NR55.ST: RNCC: 5 | RNVC: 2
5318003.55: RNCC: 5 | RNVC: 2
531800314: RNCC: 5 | RNVC: 9
5318-00314: RNCC: 5 | RNVC: 9

12 Aug 1976

5340-12-302-6344
Angle Bracket

123026344
1-2630-14-4: RNCC: 2 | RNVC: 2
1-2630-14-4: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-315-5997
Retaining Strap

123155997
DIN3016-1-F1-132X25-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-132X25-W5: RNCC: 3 | RNVC: 2
RSGU2.132/25-W5: RNCC: 3 | RNVC: 2
67210460: RNCC: 5 | RNVC: 2
DIN3016-F1-132X25-W5: RNCC: 5 | RNVC: 9
VG95931F132X25W5: RNCC: 5 | RNVC: 9

11 Nov 1988

5340-12-344-8596
Mounting Bracket

123448596
2300002-065021.000: RNCC: 2 | RNVC: 2
2300002-065021.000: RNCC: 5 | RNVC: 2
2300002-065021.000: RNCC: 5 | RNVC: 9
9856488: RNCC: 5 | RNVC: 9

19 Dec 1997

5340-12-344-4259
Mounting Bracket

123444259
P-296885-005: RNCC: 3 | RNVC: 2
P296885-005: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-386-5653
Section Block Clamp

123865653
2500262-192080.001.0: RNCC: 3 | RNVC: 2

12 Sep 2011

5340-12-131-5611
Turnbuckle

121315611
DIN82004-B0,6-VERZINKT: RNCC: 2 | RNVC: 2
DIN82004-B0,6-ZN: RNCC: 3 | RNVC: 2
B0-6DIN82004VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-043-2200

5340-12-349-7834
Retaining Strap

123497834
T290M2202270: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-352-2138
Double Angle Bracket

123522138
T531M0612201: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-382-6876
Turnbuckle

123826876
301212020: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-12-347-4289
Helical Compression Spring Seat

123474289
312508: RNCC: 3 | RNVC: 9

9 Dec 1998

5340-12-339-4353
Spring Tension Clip

123394353
474916: RNCC: 3 | RNVC: 9
474916: RNCC: 5 | RNVC: 9

22 Nov 1995

5340-12-300-9839
Angle Bracket

123009839
81437050170: RNCC: 3 | RNVC: 2
81.43705.0170: RNCC: 5 | RNVC: 2

14 Sep 1984

5340-12-362-8713
Multiple Angle Bracket

123628713
S533M5003232: RNCC: 3 | RNVC: 2

8 Apr 2004

5340-12-199-1988
Mending Plate

121991988
23111-7152.01: RNCC: 2 | RNVC: 2
23111-7152.01: RNCC: 3 | RNVC: 2
23111-7152.01: RNCC: 5 | RNVC: 9
23111-7152.01: RNCC: 5 | RNVC: 9

3 Apr 1984

5340-12-133-2970

5340-12-314-3907
Mending Plate

123143907
3604293140: RNCC: 3 | RNVC: 2
360 429 31 40: RNCC: 5 | RNVC: 2

1 Jul 1988

5340-12-342-1574
Mounting Bracket

123421574
536A16004: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-183-5565
Flush Catch Claw

121835565
844-28-210000002-0A: RNCC: 3 | RNVC: 2

29 Apr 1980

5340-12-324-8430
Bow Handle

123248430
549-10030L: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-12-331-5596
Mounting Bracket

123315596
07.0586: RNCC: 3 | RNVC: 2
07-586: RNCC: 5 | RNVC: 9

19 May 1993

5340-12-173-9996
Mending Plate

121739996
8444850: RNCC: 3 | RNVC: 2
0182-148: RNCC: 5 | RNVC: 2
0182148: RNCC: 5 | RNVC: 2

29 May 1978

5340-12-177-3436
Dust And Moisture Seal Protective Cap-Plug

121773436
025-0510-000: RNCC: 3 | RNVC: 2

29 Jan 1979

5340-12-153-6321
Turnbuckle Body

121536321
100355-416200.04: RNCC: 2 | RNVC: 2
100355-416200.04: RNCC: 3 | RNVC: 2
100355-416200-04: RNCC: 5 | RNVC: 9
100355-416200-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-0339
Angle Bracket

123080339
0092.0493.1: RNCC: 3 | RNVC: 2
9204931: RNCC: 5 | RNVC: 2

22 Aug 1986

5340-12-343-9397
Mounting Plate

123439397
CF 214 855 B: RNCC: 2 | RNVC: 2
CF 214 855 B: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-12-302-6789
Rigid Caster

123026789
YK03300132: RNCC: 3 | RNVC: 2
03300132: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 30 0132: RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-393-0208
Angle Bracket

123930208
1030105-259070.001.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-300-2043
Mending Plate

123002043
CF 339 314 B: RNCC: 3 | RNVC: 2
CF 339 314 B: RNCC: 5 | RNVC: 2

14 Jul 1984

5340-12-319-6542
Mending Plate

123196542
6200.061.3: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-12-352-4975
Mounting Bracket

123524975
521910-970170.002.0: RNCC: 2 | RNVC: 2
521910-970170.002.0: RNCC: 3 | RNVC: 2
1520480: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-315-6633
Mending Plate

123156633
512214-4505.000: RNCC: 3 | RNVC: 2
512214-4505: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-196-5522
Pad Eye

121965522
C22136-A1000-C139: RNCC: 3 | RNVC: 2
C22136A1000C139: RNCC: 5 | RNVC: 2

18 Jul 1983

5340-12-309-7847
Expansion Plug

123097847
DIN443-22-CUZN37F38: RNCC: 2 | RNVC: 2
DIN443-22-MS63: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-166-3587
Dust And Moisture Seal Protective Plug

121663587
13826004: RNCC: 3 | RNVC: 2
44945: RNCC: 5 | RNVC: 2
138463: RNCC: 5 | RNVC: 2
0126 7426: RNCC: 5 | RNVC: 2
1267426EE8751-12: RNCC: 5 | RNVC: 2
8751-12-03-175: RNCC: 5 | RNVC: 2
000.964.45.53: RNCC: 5 | RNVC: 2
SL458/135: RNCC: 5 | RNVC: 2
2714510-06704: RNCC: 5 | RNVC: 2
1267426: RNCC: 5 | RNVC: 9

31 Aug 1976

5340-12-333-5316
Webbing Strap

123335316
01802-2-01422-FE1500MM-LE900MM: RNCC: 3 | RNVC: 2
01802-2-01422-FE=1500-LE=900: RNCC: 5 | RNVC: 2
01802-2-01422-FE1500-LE900: RNCC: 5 | RNVC: 2
79036/029-2400-1500: RNCC: 5 | RNVC: 2
DIN60060-2-25X1500X900-C1/SCHNAL: RNCC: 5 | RNVC: 9

3 Jan 1994

5340-12-379-5093
Dust And Moisture Seal Protective Cap

123795093
V6525-02061-042: RNCC: 3 | RNVC: 2

31 Jul 2009

5340-12-308-6635
Dust And Moisture Seal Protective Cap

123086635
3257901: RNCC: 3 | RNVC: 2

4 Nov 1986

5340-12-379-4260
Dust And Moisture Seal Protective Cap

123794260
22RK130VA: RNCC: 3 | RNVC: 2

22 Jul 2009

5340-12-388-1979
Access Cover

123881979
5841421524: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-320-8753
Retaining Strap

123208753
8935110104: RNCC: 3 | RNVC: 9

28 Feb 1990

5340-12-358-8926
Double Angle Bracket

123588926
3835461143: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-349-8149
Dust And Moisture Seal Protective Plug

123498149
81910200771: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-354-5396
Spring Tension Clip

123545396
35432344: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-12-388-7139
Threaded Hinged Standoff

123887139
203.15.013: RNCC: 3 | RNVC: 2
203.15.013: RNCC: 5 | RNVC: 2

17 Apr 2012

5340-12-382-6346
Filler Opening Cap

123826346
0000 350 0502: RNCC: 3 | RNVC: 2
10335548: RNCC: 6 | RNVC: 9

19 Jul 2010

5340-12-192-1524
Webbing Strap

121921524
2804651: RNCC: 3 | RNVC: 2
280.4651: RNCC: 5 | RNVC: 2

29 Mar 1982

5340-12-360-3536
Loop Clamp

123603536
0009550910: RNCC: 3 | RNVC: 2
0009550910: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-354-1878
Mending Plate

123541878
03462900: RNCC: 3 | RNVC: 2

18 Jun 2001

5340-12-359-8281
Mounting Bracket

123598281
300.022.234: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-12-322-6933
Access Cover

123226933
81301100070: RNCC: 3 | RNVC: 2
81.30110.0070: RNCC: 5 | RNVC: 2

12 Sep 1990

5340-12-374-2974
Section Block Clamp

123742974
5324562: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-132-7364
Retaining Strap

121327364
577B05004: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-360-2036
Mounting Bracket

123602036
300.034.200: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-359-5851
Manual Control Lever

123595851
9452600437: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-12-355-4997
Angle Bracket

123554997
5552113: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-179-3594
Dust And Moisture Seal Protective Plug

121793594
GA12060H: RNCC: 3 | RNVC: 2
0009880635: RNCC: 5 | RNVC: 2
0009880635: RNCC: 5 | RNVC: 2

25 Jun 1979

5340-12-390-7233
Mending Plate

123907233
SK1171-171520.004.0: RNCC: 3 | RNVC: 2
7115794: RNCC: 5 | RNVC: 2

6 Dec 2012

5340-12-701-6853
Mounting Plate

127016853
VG95211-ML-127016853: RNCC: 2 | RNVC: 2
5.12.7220.2030.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-3878
Mounting Plate

127023878
VG95211-ML-127023878: RNCC: 2 | RNVC: 2
5.12.5111.1430.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-309-0021
Resilient Mount

123090021
H63-146-90-102-8-FF: RNCC: 3 | RNVC: 2

5 Dec 1986

5340-12-358-8128
Eye Hook

123588128
DIN7541-19: RNCC: 2 | RNVC: 2

18 Nov 2002

5340-12-322-5091
Nonmetallic Bumper

123225091
2079-111700.03B: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-367-9622
Nonmetallic Bumper

123679622
NO PRIMARY REF 12-367-9622: RNCC: 3 | RNVC: 2
7069548: RNCC: 5 | RNVC: 2

10 Nov 2005

5340-12-195-1990
Retaining Strap

121951990
23111-5012.02: RNCC: 3 | RNVC: 2
23111-5012-02: RNCC: 5 | RNVC: 9
23111-5012.02: RNCC: 5 | RNVC: 9
23111-5012-02: RNCC: 5 | RNVC: 9
23111-5012.02: RNCC: 5 | RNVC: 9

25 Jan 1983

5340-12-315-4086
Mounting Bracket

123154086
4900153-30100-00-15: RNCC: 3 | RNVC: 2
4900153-30100-15: RNCC: 5 | RNVC: 9

20 Oct 1988

5340-12-325-0511
Resilient Mount

123250511
E1E 31S 38 AL: RNCC: 3 | RNVC: 2
35343-027: RNCC: 3 | RNVC: 2
E1E31S38AL: RNCC: 5 | RNVC: 2
35 343-027: RNCC: 5 | RNVC: 9

26 Apr 1991

5340-12-702-2024
Angle Bracket

127022024
VG95211-ML-127022024: RNCC: 2 | RNVC: 2
30.7211.1120: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-183-9703
Turnbuckle Body

121839703
DIN1480-SPM16X140-ST: RNCC: 2 | RNVC: 2
SPMU-DIN1480-M16X140-ROH: RNCC: 3 | RNVC: 2
SPM16X140DIN1480: RNCC: 5 | RNVC: 2

7 Jun 1980

5340-12-180-5707
Angle Bracket

121805707
C381-A28-C72: RNCC: 2 | RNVC: 2
C381A28C72: RNCC: 3 | RNVC: 2
C381-A28-C72: RNCC: 5 | RNVC: 2
C381A28C72: RNCC: 5 | RNVC: 2
C381-A28-C72: RNCC: 5 | RNVC: 2

19 Sep 1979

5340-12-339-7092
Mending Plate

123397092
2500255-199900.006.0: RNCC: 2 | RNVC: 2
2500255-199900.006.0: RNCC: 3 | RNVC: 2

29 Dec 1995

5340-12-325-6826
Electronic Equipment Hardware Kit

123256826
451-365000-000-0: RNCC: 3 | RNVC: 2

28 Jun 1991

5340-12-194-8457
Nonmetallic Bumper

121948457
23176-262550.01.0: RNCC: 2 | RNVC: 2
23176-262550.01.0: RNCC: 3 | RNVC: 2
837.23176-262550.01.0.PUR50: RNCC: 3 | RNVC: 2
23176-262550-01-0: RNCC: 5 | RNVC: 9
23176-262550.01.0: RNCC: 5 | RNVC: 9
23176-262550-01-0: RNCC: 5 | RNVC: 9

14 Dec 1982

5340-12-324-4797
Extension Drawer Slide

123244797
GC301-1439-X: RNCC: 3 | RNVC: 2
GC301-1439: RNCC: 5 | RNVC: 2

21 Feb 1991

5340-12-199-4046
Rod End Clevis

121994046
P-856315-401: RNCC: 3 | RNVC: 2
P856315-401: RNCC: 5 | RNVC: 2

19 Apr 1984

5340-12-336-7126
Lock-Release Lever

123367126
06380-1101X80: RNCC: 3 | RNVC: 2
RBN944-G25XM10X80: RNCC: 3 | RNVC: 2
GN212.3-24-M10-80-E: RNCC: 3 | RNVC: 2
NLM638-1101X80: RNCC: 5 | RNVC: 9
NLM6380-1101X80: RNCC: 5 | RNVC: 9

13 Dec 1994

5340-12-362-1582
Mounting Plate

123621582
2300471-209000.01.0: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-12-168-1934
Angle Bracket

121681934
23176-221420.00.0: RNCC: 2 | RNVC: 2
23176-221420-00-0: RNCC: 3 | RNVC: 2
23176-221420.00.0: RNCC: 3 | RNVC: 2
23176-221420.00.0: RNCC: 5 | RNVC: 9
23176-221420.00.0: RNCC: 5 | RNVC: 9
23176-221420-00-0: RNCC: 5 | RNVC: 9

25 Feb 1977

5340-12-159-3748
Retaining Clip

121593748
030760: RNCC: 3 | RNVC: 2
780-1-94-01-00-0-0-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-6753
Mending Plate

121976753
P-296873-041: RNCC: 3 | RNVC: 2
P296873-041: RNCC: 5 | RNVC: 2

14 Nov 1983

5340-12-349-1900
Metal Grille

123491900
88521 15480: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-191-8496
Angle Bracket

121918496
02532549: RNCC: 3 | RNVC: 2
2532549ED5091-29: RNCC: 5 | RNVC: 2

15 Mar 1982

5340-12-126-6267
Retaining Strap

121266267
2215101: RNCC: 3 | RNVC: 2
4030: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-198-5845
Mending Plate

121985845
4900189-630071.00: RNCC: 3 | RNVC: 2

14 Feb 1984

5340-12-348-6527
Mounting Plate

123486527
301679: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-12-322-7017
Dust And Moisture Seal Protective Cap

123227017
4B81331: RNCC: 3 | RNVC: 2
1699312: RNCC: 5 | RNVC: 2
1699312: RNCC: 5 | RNVC: 2

13 Sep 1990

5340-12-177-1346
Angle Bracket

121771346
5800822-05120-008: RNCC: 3 | RNVC: 2
5800822-05120.008: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-360-9658
Mounting Plate

123609658
357-301-019B: RNCC: 3 | RNVC: 2

1 Aug 2003

5340-12-171-9129
Loop Clamp

121719129
SCH1623-TRANSPARENT: RNCC: 3 | RNVC: 2
5VC4722: RNCC: 5 | RNVC: 2
60023: RNCC: 5 | RNVC: 2
SCH1623: RNCC: 5 | RNVC: 2
SCH1623GR: RNCC: 5 | RNVC: 2
2600231: RNCC: 5 | RNVC: 9
1623: RNCC: 5 | RNVC: 9

25 Nov 1977

5340-12-323-5088
Retaining Strap

123235088
1134070: RNCC: 3 | RNVC: 2
4003.019.50.00.141: RNCC: 5 | RNVC: 2
4003.19.50/141: RNCC: 5 | RNVC: 2
1134070: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-337-2268
Mounting Plate

123372268
VG95211-ML-123372268: RNCC: 2 | RNVC: 2
5801-209-51: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-8016
Retaining Strap

123588016
J28230201-401: RNCC: 3 | RNVC: 2

18 Nov 2002

5340-12-133-4872

5340-12-025-3164

5340-12-360-2106
Mounting Bracket

123602106
81626300054: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-376-9143
Multiple Angle Bracket

123769143
504143982: RNCC: 3 | RNVC: 2

21 Nov 2008

5340-12-324-9771
Nonmetallic Bumper

123249771
129712: RNCC: 3 | RNVC: 2

17 Apr 1991

5340-12-188-8046
Dust And Moisture Seal Protective Plug

121888046
TL-4-209: RNCC: 3 | RNVC: 2
TL-4-209: RNCC: 5 | RNVC: 2
5062681: RNCC: 5 | RNVC: 2
V04614: RNCC: 5 | RNVC: 2
V4614: RNCC: 5 | RNVC: 2
5062681-4: RNCC: 5 | RNVC: 2
5062681/4: RNCC: 5 | RNVC: 2
250168-9400.07: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-317-4211
Mending Plate

123174211
P-145502-064: RNCC: 3 | RNVC: 2
P145502-064: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-340-0049
Mounting Plate

123400049
1361235-12282-01: RNCC: 3 | RNVC: 2

13 Feb 1996

5340-12-328-5428
Catch Strike

123285428
2653-185100.01: RNCC: 2 | RNVC: 2
2653-185100.01: RNCC: 3 | RNVC: 2

2 Jun 1992

5340-12-365-1605
Mechanical Stop

123651605
536077-8412.000: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-358-7991
Manual Control Lever

123587991
000321: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-197-0220
Dust And Moisture Seal Protective Plug

121970220
7408.0: RNCC: 3 | RNVC: 2
684.0.3.03: RNCC: 5 | RNVC: 2
N2757: RNCC: 5 | RNVC: 2

12 Sep 1983

5340-12-343-9814
Access Cover

123439814
536519-8816.000: RNCC: 2 | RNVC: 2
536519-8816.000: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-12-347-2290
Angle Bracket

123472290
536D13730: RNCC: 3 | RNVC: 2

16 Nov 1998

5340-12-161-9752

5340-12-024-8620

5340-12-185-8692
Loop Clamp

121858692
3556199: RNCC: 3 | RNVC: 2
3556199: RNCC: 5 | RNVC: 2

6 Nov 1980

5340-12-325-1243
Flare Lock Fastener

123251243
12475PA66S: RNCC: 3 | RNVC: 2
12475: RNCC: 5 | RNVC: 2
PL ZK12475PA66S: RNCC: 5 | RNVC: 2

6 May 1991

5340-12-308-4871
Lock-Release Lever

123084871
2440303: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-12-176-9466
Mending Plate

121769466
4433 303 007: RNCC: 3 | RNVC: 2
4433303007: RNCC: 5 | RNVC: 2
4433303007: RNCC: 5 | RNVC: 9

27 Dec 1978

5340-12-316-2900
Helical Compression Spring Retainer

123162900
6381482: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-188-7931
Resilient Mount

121887931
102641: RNCC: 3 | RNVC: 2

29 Jul 1981

5340-12-145-3942

5340-12-128-6531

5340-12-362-3083
Loop Clamp

123623083
LN9490BM7: RNCC: 2 | RNVC: 2

5 Feb 2004

5340-12-372-1488
Manual Control Handle

123721488
S533I30A1102: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-12-362-0066
Dust And Moisture Seal Protective Plug

123620066
0425 0608: RNCC: 3 | RNVC: 2

16 Dec 2003

5340-12-393-7756
Block Clamp

123937756
ECS6088G1C12: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-12-302-2626
Mending Plate

123022626
163773102: RNCC: 3 | RNVC: 2
42408177: RNCC: 3 | RNVC: 2
42408177EZ7101-71: RNCC: 5 | RNVC: 2

12 Dec 1984

5340-12-388-7717
Angle Bracket

123887717
601253-201400.02: RNCC: 2 | RNVC: 2
601253-201400.02: RNCC: 3 | RNVC: 2

20 Apr 2012

5340-12-146-7060
Retaining Strap

121467060
TW931-2140-115: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-356-1756
Angle Bracket

123561756
ED41-0800-00210-109: RNCC: 2 | RNVC: 2
ED41-0800-00210-109: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-367-6161
Mounting Bracket

123676161
4100001-251340.000: RNCC: 3 | RNVC: 2

13 Sep 2005

Load More Results