What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 25 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 25 of 178

5340-12-310-5689
Clamping Catch

123105689
2220320003: RNCC: 3 | RNVC: 2
22203 20003: RNCC: 5 | RNVC: 9

3 Jun 1987

5340-12-319-2679
Helical Compression Spring Retainer

123192679
409166: RNCC: 3 | RNVC: 2
409166: RNCC: 5 | RNVC: 2
409166: RNCC: 5 | RNVC: 9

18 Sep 1989

5340-12-335-9768
Dust And Moisture Seal Protective Plug

123359768
16171500: RNCC: 3 | RNVC: 2
16171500: RNCC: 5 | RNVC: 9

7 Oct 1994

5340-12-133-7796

5340-12-327-3487
Plug Button

123273487
4.2592: RNCC: 3 | RNVC: 2
81623960011: RNCC: 5 | RNVC: 2
0066909: RNCC: 5 | RNVC: 2
FBU2894: RNCC: 5 | RNVC: 2
81.62396-0011: RNCC: 5 | RNVC: 2

14 Jan 1992

5340-12-701-6869
Mounting Bracket

127016869
VG95211-ML-127016869: RNCC: 2 | RNVC: 2
5.12.7220.2213.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-313-1923
Friction Catch

123131923
AS418-39-2: RNCC: 3 | RNVC: 2

10 Mar 1988

5340-12-306-3983
Retaining Strap

123063983
V22.917.1-25: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-173-9851
Rod End Clevis

121739851
DIN71752-G12X24FG-9SMN28K-PHOSPH: RNCC: 2 | RNVC: 2
DIN71752-G12X24FG-9SMNPB28K-PHOS: RNCC: 2 | RNVC: 2
DIN71752-G12X24FG-PHOSPHATIERT: RNCC: 2 | RNVC: 2
DIN71752-G12X24FG-PHOSPHATIERT: RNCC: 3 | RNVC: 2
140200120024/002: RNCC: 3 | RNVC: 2
DIN71752-G12X24FG-PHOSPHATIERT: RNCC: 3 | RNVC: 2
071752012001: RNCC: 5 | RNVC: 2
DIN71752-G12X24FG-9S20K-PHOSPHAT: RNCC: 5 | RNVC: 2
G12X24FGDIN71752PH0SPHATIERT: RNCC: 5 | RNVC: 2

26 May 1978

5340-12-193-7728
Sealing Plug Assembly

121937728
020630-500000.01: RNCC: 2 | RNVC: 2
TC 057: RNCC: 3 | RNVC: 2
020630-500000.01: RNCC: 3 | RNVC: 2
020630-500000.01: RNCC: 3 | RNVC: 2
900 220: RNCC: 5 | RNVC: 2
020208-500000.01: RNCC: 5 | RNVC: 9
020208-500000.01: RNCC: 5 | RNVC: 9
020208-500000.01: RNCC: 5 | RNVC: 9
08-01-38-0: RNCC: 5 | RNVC: 9

30 Aug 1982

5340-12-190-7190
Mounting Bracket

121907190
NO PRIMARY REF 12-190-7190: RNCC: 3 | RNVC: 2
7542 135149: RNCC: 5 | RNVC: 9
7542135149: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-158-7592
Dust And Moisture Seal Protective Cap-Plug

121587592
900A8,5: RNCC: 3 | RNVC: 2
GPN900A8-5: RNCC: 5 | RNVC: 2
900A8,5: RNCC: 5 | RNVC: 2
GPN900A8,5: RNCC: 5 | RNVC: 2
GPN900A8-5: RNCC: 5 | RNVC: 2
GRN900-A8-5: RNCC: 5 | RNVC: 2
900008500: RNCC: 5 | RNVC: 9
A8-5: RNCC: 5 | RNVC: 9
A8-5GPN900: RNCC: 5 | RNVC: 9
GPN900,A8,5: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-181-1644
Spring Tension Clip

121811644
NO PRIMARY REF 12-181-1644: RNCC: 3 | RNVC: 2
KN03-132: RNCC: 5 | RNVC: 9

29 Oct 1979

5340-12-365-0195
Mechanic Equipment Hardware Kit

123650195
V12S1T2U-300: RNCC: 3 | RNVC: 2
AFG071869-01: RNCC: 5 | RNVC: 2

24 Nov 2004

5340-12-197-4422
Lock-Release Lever

121974422
DNDL25-725T7: RNCC: 3 | RNVC: 2

24 Oct 1983

5340-12-344-4727
Mounting Bracket

123444727
A-244831-071: RNCC: 3 | RNVC: 2
A244831-071: RNCC: 5 | RNVC: 2

30 Oct 1997

5340-12-339-0932
Mounting Bracket

123390932
4900319-207100.00: RNCC: 2 | RNVC: 2
4900319-207100.00: RNCC: 3 | RNVC: 2

10 Oct 1995

5340-12-383-5111
Mechanical Stop

123835111
1179871: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-12-334-2307
Webbing Strap

123342307
79017/077-1200-0500: RNCC: 3 | RNVC: 2
79017/077-1200-500: RNCC: 5 | RNVC: 2
DIN60060-2-25X500X700-C4/D2: RNCC: 5 | RNVC: 9

18 Apr 1994

5340-12-164-8941
Loop Clamp

121648941
F32TAN15802-1-4544-9: RNCC: 3 | RNVC: 2
F32TAN15802N: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-142-4361
Spring Tension Clip

121424361
KLS12GU-18: RNCC: 3 | RNVC: 2
5809012018: RNCC: 5 | RNVC: 2
15200100: RNCC: 5 | RNVC: 2
15200100: RNCC: 5 | RNVC: 2
269012060091: RNCC: 5 | RNVC: 9
KLSGU18-9: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-358-1348
Lock-Release Lever

123581348
4000A-341200.004.0: RNCC: 2 | RNVC: 2
4000A-341200.004.0: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-12-317-8019
Mounting Bracket

123178019
P-616815-431: RNCC: 3 | RNVC: 2
P616815-431: RNCC: 5 | RNVC: 2

16 May 1989

5340-12-187-5633
Loop Clamp

121875633
P-565579-003: RNCC: 3 | RNVC: 2
P565579-003: RNCC: 5 | RNVC: 2

15 Apr 1981

5340-12-024-2066

5340-12-197-8835
Rod End Clevis

121978835
1809027103: RNCC: 3 | RNVC: 2
0002521314: RNCC: 5 | RNVC: 2

30 Nov 1983

5340-12-700-2874
Dust And Moisture Seal Boot

127002874
IW6.434.018: RNCC: 2 | RNVC: 2

28 Nov 1991

5340-12-379-9751
Flush Bolt

123799751
58290286: RNCC: 3 | RNVC: 2
CV169191: RNCC: 5 | RNVC: 2
58290286: RNCC: 5 | RNVC: 2

16 Sep 2009

5340-12-326-1389
Angle Bracket

123261389
0414 7313: RNCC: 3 | RNVC: 2
4147313ED0148-43: RNCC: 5 | RNVC: 2

12 Aug 1991

5340-12-315-8865
Double Angle Bracket

123158865
4606830174: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-12-366-4806
Access Cover

123664806
2 0072-607: RNCC: 3 | RNVC: 2
2 0072-607: RNCC: 5 | RNVC: 2

28 Apr 2005

5340-12-383-0628
Detent Plunger

123830628
2497913: RNCC: 3 | RNVC: 2

9 Sep 2010

5340-12-337-1079
Lock-Release Lever

123371079
1000006-800.00: RNCC: 2 | RNVC: 2

19 Jan 1995

5340-12-383-3593
Dust And Moisture Seal Protective Cap-Plug

123833593
1407511: RNCC: 3 | RNVC: 2
35.445.003: RNCC: 5 | RNVC: 2

11 Oct 2010

5340-12-363-0237
Webbing Strap

123630237
79057-12000: RNCC: 3 | RNVC: 2

27 Apr 2004

5340-12-702-2159
Mounting Plate

127022159
VG95211-ML-127022159: RNCC: 2 | RNVC: 2
30.7222.190: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-355-9941
Access Cover

123559941
5400051-432013.00: RNCC: 2 | RNVC: 2
5400051-432013.00: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-12-309-8090
Dust And Moisture Seal Protective Plug

123098090
300F311 SCHWARZ: RNCC: 3 | RNVC: 2
40,7N15042PP-SW: RNCC: 5 | RNVC: 2
GPN300,F311,SCHWARZ: RNCC: 5 | RNVC: 2
50355300: RNCC: 5 | RNVC: 2
915042040001: RNCC: 5 | RNVC: 2
300040780: RNCC: 5 | RNVC: 2

5 Mar 1987

5340-12-174-2615
Webbing Strap

121742615
7881143: RNCC: 3 | RNVC: 2
7881-143: RNCC: 5 | RNVC: 2
1000025-591300: RNCC: 5 | RNVC: 9
000-G1-25X2,0X540X69-BW-RAL6031: RNCC: 6 | RNVC: 9

19 Jun 1978

5340-12-196-0017
Retaining Strap

121960017
C22136-A1000-C468: RNCC: 3 | RNVC: 2
C22136A1000C468: RNCC: 5 | RNVC: 2

13 May 1983

5340-12-701-2963
Mounting Plate

127012963
VG95211-ML-127012963: RNCC: 2 | RNVC: 2
5.12.5101.4601.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-6348
Mounting Plate

123616348
704-121413-911-0: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-12-199-2767
Retaining Strap

121992767
114M40003: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-12-044-3496

5340-12-301-1285
Double Angle Bracket

123011285
A-243799-051: RNCC: 3 | RNVC: 2
A243799-051: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-358-1565
Runner

123581565
2800-190000.013.0: RNCC: 2 | RNVC: 2
2800-190000.013.0: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-12-314-5942
Mounting Bracket

123145942
512214-3800.000: RNCC: 3 | RNVC: 2
512214-3800: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-12-701-7740
Loop Clamp

127017740
VG95211-ML-127017740: RNCC: 2 | RNVC: 2
5.12.7702.8180.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-389-9127
Angle Bracket

123899127
598107-180000.001.0: RNCC: 2 | RNVC: 2
598107-180000.001.0: RNCC: 3 | RNVC: 2

12 Sep 2012

5340-12-309-5446
Mending Plate

123095446
A-295063-003: RNCC: 3 | RNVC: 2
A295063-003: RNCC: 5 | RNVC: 2

3 Feb 1987

5340-12-330-2447
Access Cover

123302447
151-265100-000-0: RNCC: 3 | RNVC: 2
3794386KD3132-00: RNCC: 5 | RNVC: 2

20 Nov 1992

5340-12-701-8053
Rod End Clevis

127018053
VG95211-ML-127018053: RNCC: 2 | RNVC: 2
5.12.8700.1423.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-393-0884
Angle Bracket

123930884
SK1349-977340.009.0: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-12-153-6865
Spring Tension Clip

121536865
01236773: RNCC: 3 | RNVC: 2
N92034S: RNCC: 5 | RNVC: 2
N92034S: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-183-8451
Dust And Moisture Seal Protective Cap

121838451
181945287: RNCC: 3 | RNVC: 2

24 May 1980

5340-12-326-6877
Rod End Clevis

123266877
105-45530: RNCC: 3 | RNVC: 2

21 Oct 1991

5340-12-174-9286
Access Cover

121749286
0008210038: RNCC: 3 | RNVC: 2
0008210038: RNCC: 5 | RNVC: 2

9 Aug 1978

5340-12-162-1993
Retaining Strap

121621993
2211228701: RNCC: 3 | RNVC: 2
22112 28701: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-011-5599

5340-12-197-5302
Resilient Mount

121975302
4212400035: RNCC: 3 | RNVC: 2

28 Oct 1983

5340-12-091-0885

5340-12-301-8443
Expansion Shield

123018443
NO PRIMARY REF 12-301-8443: RNCC: 3 | RNVC: 2
0039887678: RNCC: 5 | RNVC: 2
78837: RNCC: 5 | RNVC: 9

13 Nov 1984

5340-12-308-2368
Double Angle Bracket

123082368
5800043-2510.01: RNCC: 2 | RNVC: 2
5800043-2510.01: RNCC: 3 | RNVC: 2
5800043-2510.01: RNCC: 5 | RNVC: 9

18 Sep 1986

5340-12-316-1816
Angle Bracket

123161816
7400001-201260.01: RNCC: 3 | RNVC: 2
7400001-201260.01: RNCC: 5 | RNVC: 9

29 Dec 1988

5340-12-348-9604
Mounting Bracket

123489604
245/7383-03-00-02: RNCC: 3 | RNVC: 2

7 Sep 1999

5340-12-381-0392
Angle Bracket

123810392
9999075-254100.001.0: RNCC: 3 | RNVC: 2

4 Jan 2010

5340-12-194-5747
Dust And Moisture Seal Protective Cap

121945747
96.003.000: RNCC: 3 | RNVC: 2
12-84332-001: RNCC: 5 | RNVC: 2

18 Nov 1982

5340-12-349-2742
Loop Clamp

123492742
RAPR12-110: RNCC: 3 | RNVC: 2

19 Oct 1999

5340-12-326-1244
Barrel Bolt

123261244
1.99.888.0: RNCC: 3 | RNVC: 2
1.99.888.0-GAH 11-260/KZ47: RNCC: 5 | RNVC: 2
1.99.888.0-GAH 128777: RNCC: 5 | RNVC: 2
129399: RNCC: 5 | RNVC: 2
4-178246: RNCC: 5 | RNVC: 2
1.99.0888.0: RNCC: 5 | RNVC: 2

12 Aug 1991

5340-12-322-6489
Helical Compression Spring Retainer

123226489
4002.021.02.00/034: RNCC: 3 | RNVC: 2
4002.21.02/34: RNCC: 5 | RNVC: 2
0813445: RNCC: 5 | RNVC: 2
0813445: RNCC: 5 | RNVC: 2
813445: RNCC: 5 | RNVC: 2

10 Sep 1990

5340-12-198-5620
Double Angle Bracket

121985620
23114-2405-81: RNCC: 2 | RNVC: 2
23114-2405.81: RNCC: 3 | RNVC: 2
23114-2405-81: RNCC: 5 | RNVC: 9
23114-2405.81: RNCC: 5 | RNVC: 9
23114-2405-81: RNCC: 5 | RNVC: 9
23114-2405.81: RNCC: 5 | RNVC: 9

9 Feb 1984

5340-12-198-7618
Caster Frame

121987618
T01.04-U06: RNCC: 3 | RNVC: 2
T01-04U06: RNCC: 5 | RNVC: 2
T01-04U06: RNCC: 5 | RNVC: 9
T01.04-U06: RNCC: 5 | RNVC: 9

23 Feb 1984

5340-12-173-8550
Retaining Strap

121738550
P-296652-031: RNCC: 3 | RNVC: 2
P296652-031: RNCC: 5 | RNVC: 2

17 May 1978

5340-12-313-0170
Double Angle Bracket

123130170
P-086147-078: RNCC: 3 | RNVC: 2
P086147-078: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-323-5079
Loop Clamp

123235079
DIN3015-Z-A-4G-Z8-28-PA6-W1: RNCC: 2 | RNVC: 2
HRGZ4A28-28PA STMBL: RNCC: 3 | RNVC: 2
RBNG1-428/28: RNCC: 3 | RNVC: 2
SP428/28PAH-GD-AS: RNCC: 3 | RNVC: 2
1381228: RNCC: 5 | RNVC: 2
RBNG1-428/28: RNCC: 5 | RNVC: 2
DIN3015-Z-A-4G-Z8-28-PA-W1: RNCC: 5 | RNVC: 2
DIN3015-ZA4G-28-28PA-W1: RNCC: 5 | RNVC: 2
1381228: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-164-8539
Nonmetallic Bumper

121648539
23303-160000.16: RNCC: 2 | RNVC: 2
4.771.246.000: RNCC: 3 | RNVC: 2
4-771-246-000: RNCC: 5 | RNVC: 2
4-771-246-000E: RNCC: 5 | RNVC: 2
4-19-0188428: RNCC: 5 | RNVC: 2
23303-160000.16: RNCC: 5 | RNVC: 9
23303-160000-16: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-4485
Mounting Plate

123164485
P-050761-023: RNCC: 3 | RNVC: 2
P050761-023: RNCC: 5 | RNVC: 2

18 Jan 1989

5340-12-166-8934
Retaining Strap

121668934
2227339: RNCC: 3 | RNVC: 2
2005-25: RNCC: 5 | RNVC: 2
2227-33-9: RNCC: 5 | RNVC: 2
504308: RNCC: 5 | RNVC: 2
2227-33-9: RNCC: 5 | RNVC: 2

27 Oct 1976

5340-12-301-9056
Angle Bracket

123019056
2300002-181040.010: RNCC: 2 | RNVC: 2
2300002-181040.010: RNCC: 3 | RNVC: 2
2300002-181040.010: RNCC: 5 | RNVC: 9
2300002-181040-010: RNCC: 5 | RNVC: 9
2300002-181040.010: RNCC: 5 | RNVC: 9

16 Nov 1984

5340-12-364-4310
Mounting Bracket

123644310
54.1107.503.11: RNCC: 3 | RNVC: 2

24 Sep 2004

5340-12-361-4925
Mounting Bracket

123614925
1504295: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-305-1258
Dust And Moisture Seal Protective Cap

123051258
01TC34603: RNCC: 3 | RNVC: 2

30 Sep 1985

5340-12-378-3557
Double Angle Bracket

123783557
41011106: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-306-0137
Double Angle Bracket

123060137
2659901: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-197-3464
Resilient Mount

121973464
1202-5A: RNCC: 3 | RNVC: 2

13 Oct 1983

5340-12-177-4889
Nonmetallic Bumper

121774889
R21471: RNCC: 3 | RNVC: 2
R21471: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-338-9511
Swivel Caster

123389511
L-PO 75 G: RNCC: 3 | RNVC: 2
L-PO75G: RNCC: 5 | RNVC: 2

18 Sep 1995

5340-12-313-5874
Bow Handle

123135874
277.4: RNCC: 3 | RNVC: 2
272.962 100: RNCC: 5 | RNVC: 2

19 Apr 1988

5340-12-301-1981
Pipe Bracket

123011981
1423-910.83(5): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-148-4707
Loop Clamp

121484707
G20TAN15802-0: RNCC: 3 | RNVC: 2
G20TAN15802-3-1364-5: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-175-9111
Retaining Strap

121759111
2300109-282200.002.0: RNCC: 2 | RNVC: 2
2300109-282200.002.0: RNCC: 3 | RNVC: 2
2300109-282200-002-0: RNCC: 5 | RNVC: 2
2300109-282200-002-0: RNCC: 5 | RNVC: 9
2300109-282200.002.0: RNCC: 5 | RNVC: 9

25 Oct 1978

5340-12-344-4276
Mounting Bracket

123444276
P-297201-477: RNCC: 3 | RNVC: 2
P297201-477: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-192-7025
Retaining Strap

121927025
LN29836 B2-25: RNCC: 2 | RNVC: 2
LN29836-2-25: RNCC: 5 | RNVC: 2
LN29836B2-25: RNCC: 5 | RNVC: 2

17 May 1982

5340-12-363-9080
Angle Bracket

123639080
J92228241-401: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-392-0086
Runner

123920086
109048-15304: RNCC: 3 | RNVC: 2

25 Apr 2013

5340-12-348-8597
Angle Bracket

123488597
3660921340: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-12-373-3913
Swivel Caster

123733913
LH-POTH 75G: RNCC: 3 | RNVC: 2

29 Oct 2007

5340-12-306-6494
Plain Solid Disk

123066494
211812-4000: RNCC: 3 | RNVC: 2
0825501: RNCC: 5 | RNVC: 2
825501: RNCC: 5 | RNVC: 9

18 Mar 1986

5340-12-353-8879
Mounting Plate

123538879
209847: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-390-4708
Padlock

123904708
190/60: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-12-154-6093
Angle Bracket

121546093
8200784941: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-195-2168
Doppelt Abg Halter

5340-12-393-6441
Section Block Clamp

123936441
06.66011-1110: RNCC: 3 | RNVC: 2
06.66011-1110: RNCC: 5 | RNVC: 2

30 Sep 2013

5340-12-373-1688
Metallic Bumper

123731688
1123270084: RNCC: 3 | RNVC: 2
112 327 00 84: RNCC: 5 | RNVC: 2

5 Oct 2007

5340-12-337-4197
Lock-Release Lever

123374197
01242901: RNCC: 3 | RNVC: 2
01242900: RNCC: 5 | RNVC: 2
01242901.873: RNCC: 5 | RNVC: 2

1 Mar 1995

5340-12-389-4455
Access Cover

123894455
5840500418: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-12-166-6298
Hand Crank

121666298
194920713: RNCC: 3 | RNVC: 9
194920713: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-393-4008
Mounting Plate

123934008
115043: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-12-320-9446
Resilient Mount

123209446
055161009000: RNCC: 3 | RNVC: 2
055100009000: RNCC: 5 | RNVC: 2

8 Mar 1990

5340-12-388-0197
Access Cover

123880197
5841401721: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-351-4490
Access Cover

123514490
T311M1173101: RNCC: 3 | RNVC: 2

27 Jul 2000

5340-12-316-6479
Electrical-Mechanical Equipment Post

123166479
5185269: RNCC: 3 | RNVC: 2

31 Jan 1989

5340-12-372-5125
Dust And Moisture Seal Protective Cover

123725125
10021055: RNCC: 3 | RNVC: 2

24 Jul 2007

5340-12-372-9929
Dust And Moisture Seal Protective Plug

123729929
FORM NR. 1003: RNCC: 3 | RNVC: 2

14 Sep 2007

5340-12-331-6330
Mounting Bracket

123316330
81974010816: RNCC: 3 | RNVC: 2
81.97401-0816: RNCC: 5 | RNVC: 2

2 Jun 1993

5340-12-332-4185
Mounting Bracket

123324185
480-7345-08-00-22: RNCC: 3 | RNVC: 2
480/7345-08-00-22: RNCC: 5 | RNVC: 2

10 Aug 1993

5340-12-330-3177
Door Handle

123303177
08-4-002: RNCC: 3 | RNVC: 2
08-4-002: RNCC: 5 | RNVC: 2
08-4-002: RNCC: 5 | RNVC: 2
08-4-002: RNCC: 5 | RNVC: 9

2 Dec 1992

5340-12-175-7009
Webbing Strap

121757009
CF4533110U: RNCC: 3 | RNVC: 2
CF 453 311 -U: RNCC: 5 | RNVC: 2
CF4533110U: RNCC: 5 | RNVC: 2
CF 453 311 -U: RNCC: 5 | RNVC: 2
CF4533110U: RNCC: 5 | RNVC: 2
CF 453 311 -U: RNCC: 5 | RNVC: 2
000-A3-25X2,0X600-PE-RAL6031: RNCC: 6 | RNVC: 9

11 Oct 1978

5340-12-135-6751
Butt Hinge

121356751
DIN7954-A40-ST-BK: RNCC: 2 | RNVC: 2
A40DIN7954: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-409-8357

5340-12-411-2223

5340-12-156-3283
Retaining Band

121563283
7101-54-100-63: RNCC: 3 | RNVC: 2
162574303: RNCC: 5 | RNVC: 2
7101-54-100-63: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-393-6463
Mechanic Equipment Hardware Kit

123936463
21120-158: RNCC: 3 | RNVC: 2

30 Sep 2013

5340-12-186-3838
Clamping Catch

121863838
V18L01-1Y1AA: RNCC: 3 | RNVC: 2
L12369-50: RNCC: 5 | RNVC: 2

23 Dec 1980

5340-12-353-5748
Block Clamp

123535748
J29120345-401: RNCC: 3 | RNVC: 2

11 Apr 2001

5340-12-338-8226
Mounting Bracket

123388226
463-224572.000: RNCC: 3 | RNVC: 9
9898583: RNCC: 5 | RNVC: 9

29 Aug 1995

5340-12-361-7026
Loop Clamp

123617026
DIN3015-L-KP-1-R-12-PA: RNCC: 2 | RNVC: 2
0870488: RNCC: 3 | RNVC: 2
112APA: RNCC: 3 | RNVC: 2

5 Nov 2003

5340-12-348-5154
Nonmetallic Bumper

123485154
511016-0000.00: RNCC: 2 | RNVC: 2
511016-0000.00: RNCC: 3 | RNVC: 2

8 Jul 1999

5340-12-320-4853
Butt Hinge Leaf

123204853
2300042-188120.001: RNCC: 2 | RNVC: 2
9873201: RNCC: 3 | RNVC: 2
2300042-188120.001: RNCC: 5 | RNVC: 9
9873201: RNCC: 5 | RNVC: 9

18 Jan 1990

5340-12-359-7805
Angle Bracket

123597805
2500113-2481: RNCC: 2 | RNVC: 2
2500113-2481: RNCC: 3 | RNVC: 2

10 Mar 2003

5340-12-312-5439
Angle Bracket

123125439
4200081-151152.001: RNCC: 3 | RNVC: 2
4200081-151152.001: RNCC: 5 | RNVC: 9
4200081-151152.001: RNCC: 5 | RNVC: 9
9843763: RNCC: 5 | RNVC: 9

15 Jan 1988

5340-12-392-4173
Dust And Moisture Seal Protective Cap

123924173
L111982: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-12-340-2642
Nonmetallic Bumper

123402642
9525813: RNCC: 2 | RNVC: 2
9525813: RNCC: 3 | RNVC: 2

20 Mar 1996

5340-12-331-0340
Mounting Bracket

123310340
2300109-181041.000.0: RNCC: 3 | RNVC: 2
1287050: RNCC: 5 | RNVC: 2

15 Mar 1993

5340-12-330-3749
Butt Hinge Leaf

123303749
2300109-181411.010.0: RNCC: 3 | RNVC: 2

8 Dec 1992

5340-12-701-2503
Mounting Bracket

127012503
VG95211-ML-127012503: RNCC: 2 | RNVC: 2
5.12.3620.8520.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-343-9651
Pad Eye

123439651
136-040.01-025: RNCC: 3 | RNVC: 2
136 E 040.01-25: RNCC: 5 | RNVC: 2

20 Aug 1997

5340-12-365-1890
Mounting Plate

123651890
2300109-033100.006.0: RNCC: 3 | RNVC: 2

7 Dec 2004

5340-12-024-9701

5340-12-004-3732

5340-12-164-5691

5340-12-358-2549
Manual Control Lever

123582549
14.70.26: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-12-366-8247
Dust And Moisture Seal Protective Cap

123668247
CBD45069G01: RNCC: 3 | RNVC: 2

14 Jun 2005

5340-12-320-7343
Mending Plate

123207343
54.0062.990.01: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-12-180-4440
Dust And Moisture Seal Protective Cap

121804440
200Z8X10RAL1016: RNCC: 3 | RNVC: 2
GPN200Z8X10RAL1016: RNCC: 5 | RNVC: 2
200081010: RNCC: 5 | RNVC: 9
200Z8X10 GELB: RNCC: 5 | RNVC: 9
GPN200,Z8X10,GELB: RNCC: 5 | RNVC: 9

12 Sep 1979

5340-12-331-9866
Compression Cup

123319866
QT DF63.16AGU 01: RNCC: 3 | RNVC: 2
QTDF63.16AGU01: RNCC: 5 | RNVC: 2

13 Jul 1993

5340-12-093-6629

5340-12-191-1353
Metal Runner

121911353
CF 455 306: RNCC: 3 | RNVC: 2
CF 455 306: RNCC: 5 | RNVC: 2
CF455306: RNCC: 5 | RNVC: 2
CF455306: RNCC: 5 | RNVC: 2

14 Jan 1982

5340-12-191-3448
Clamp Bolt Assembly

121913448
496.6421: RNCC: 3 | RNVC: 2
4966421: RNCC: 5 | RNVC: 2

26 Jan 1982

5340-12-371-3111
Mending Plate

123713111
409124847: RNCC: 3 | RNVC: 2

13 Mar 2007

5340-12-150-3186
Einfach Abg Halter

5340-12-150-6851
Verbindungsstueck

5340-12-162-5836
Resilient Mount

121625836
81962100123: RNCC: 3 | RNVC: 2
845-81.96210.0123: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-354-8576
Elastic Strap

123548576
8310-0027: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-316-8286
Retaining Strap

123168286
4200077-140-01: RNCC: 2 | RNVC: 2

16 Feb 1989

5340-12-168-5536
Pad Eye

121685536
C22107A137C305: RNCC: 3 | RNVC: 2
C22107-A137-C305: RNCC: 5 | RNVC: 2

22 Mar 1977

5340-12-382-6343
Access Cover

123826343
V6550-03031-043: RNCC: 3 | RNVC: 2

19 Jul 2010

5340-12-393-6855
Block Clamp

123936855
06.67690-0407: RNCC: 3 | RNVC: 2
06.67690-0407: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-12-351-3617
Access Cover

123513617
72.012-113.030: RNCC: 3 | RNVC: 2

18 Jul 2000

5340-12-356-5090
Access Cover

123565090
J94330065-001: RNCC: 3 | RNVC: 2
7780224: RNCC: 5 | RNVC: 2

7 Mar 2002

5340-12-356-5085
Mounting Bracket

123565085
J92222229-003: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-322-9803
Access Cover

123229803
198 7122 00: RNCC: 3 | RNVC: 2
198712200: RNCC: 5 | RNVC: 2
PH80-25: RNCC: 5 | RNVC: 2

15 Oct 1990

5340-12-374-4355
Multiple Angle Bracket

123744355
5840-CS-6167: RNCC: 3 | RNVC: 2

18 Feb 2008

5340-12-371-5887
Spring Loaded Cylinder Fastener

123715887
GN612-10-M20X1.5-AK-NI: RNCC: 3 | RNVC: 2
10017542: RNCC: 5 | RNVC: 2

20 Apr 2007

5340-12-372-9830
Shimmy Damper

123729830
370003-05: RNCC: 3 | RNVC: 2

13 Sep 2007

5340-12-352-4241
Mounting Bracket

123524241
5600023-190117.000.0: RNCC: 2 | RNVC: 2
5600023-190117.000.0: RNCC: 3 | RNVC: 2
1596674: RNCC: 5 | RNVC: 2

17 Nov 2000

5340-12-194-9583
Retaining Strap

121949583
42-1543-192300.01.0: RNCC: 3 | RNVC: 2
42-1543-192300-01-0: RNCC: 5 | RNVC: 2
42-1543-192300-01-0: RNCC: 5 | RNVC: 9

22 Dec 1982

5340-12-347-0982
Angle Bracket

123470982
2.72-32606: RNCC: 3 | RNVC: 2

26 Oct 1998

5340-12-197-8274
Dust And Moisture Seal Protective Cap

121978274
4 025 090 532: RNCC: 3 | RNVC: 2

25 Nov 1983

5340-12-316-3763
Webbing Strap

123163763
113489: RNCC: 3 | RNVC: 2
400-848.1072.4: RNCC: 5 | RNVC: 2

13 Jan 1989

5340-12-301-0997
Metal Runner

123010997
54.0028.574.01: RNCC: 3 | RNVC: 2

21 Sep 1984

5340-12-356-6176
Retaining Clip

123566176
04003554: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-339-1798
Access Cover

123391798
246.0357: RNCC: 3 | RNVC: 2

23 Oct 1995

5340-12-361-5708
Extension Drawer Slide

123615708
1.350.413.9: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-12-199-4005
Rigid Caster

121994005
320.891.04-960.3: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-343-1042
Mounting Bracket

123431042
5092-184: RNCC: 3 | RNVC: 2

29 Apr 1997

5340-12-328-9197
Rim Lock

123289197
6000186: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-197-2321
Electrical-Mechanical Equipment Post

121972321
3269970215: RNCC: 3 | RNVC: 2

3 Oct 1983

5340-12-352-1419
Nut And Bolt Locking Plate

123521419
8809940432: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-12-179-7142
Turnbuckle

121797142
439311001: RNCC: 3 | RNVC: 2

23 Jul 1979

5340-12-377-1832
Loop Clamp

123771832
17315292: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-367-9259
Mounting Bracket

123679259
2300447-251560.000: RNCC: 2 | RNVC: 2
2300447-251560.000: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-12-155-8979

5340-12-091-8673

5340-12-186-4983
Bow Handle

121864983
GE9101G168: RNCC: 3 | RNVC: 2
GE9101G168: RNCC: 3 | RNVC: 9

9 Jan 1981

5340-12-334-0062
Mounting Bracket

123340062
15 0004 702: RNCC: 2 | RNVC: 2
15 0004 702: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-12-358-9233
Mounting Plate

123589233
3804310440: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-196-9868
Angle Bracket

121969868
A-230129-011: RNCC: 3 | RNVC: 2
A230129-011: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-359-9452
Metallic Bumper

123599452
057204: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-12-358-6831
Angle Bracket

123586831
2481-390106.000.0: RNCC: 2 | RNVC: 2
2481-390106.000.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-349-8060
Access Cover

123498060
32 72 2 310 752: RNCC: 3 | RNVC: 2

11 Jan 2000

5340-12-348-9841
Dust And Moisture Seal Protective Plug

123489841
4062650147: RNCC: 3 | RNVC: 2
A 406 265 01 47: RNCC: 5 | RNVC: 9

9 Sep 1999

5340-12-374-8162
Extension Drawer Slide

123748162
54.2731.000.41LV: RNCC: 3 | RNVC: 2

27 Mar 2008

5340-12-197-2787
Dust And Moisture Seal Protective Cap

121972787
66.3851.180.02-A001: RNCC: 3 | RNVC: 2
170686: RNCC: 5 | RNVC: 2

7 Oct 1983

5340-12-198-1575
Mending Plate

121981575
RP981777: RNCC: 3 | RNVC: 2

27 Dec 1983

5340-12-359-1514
Mounting Bracket

123591514
ZG5200G412: RNCC: 3 | RNVC: 2
ZG5200G412: RNCC: 5 | RNVC: 9
ZG5200G412ST: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-301-8412
Nonmetallic Bumper

123018412
VG95092A4X4,5X20X10NR70: RNCC: 2 | RNVC: 2
82200-A4X4,5X20X10.NR70: RNCC: 3 | RNVC: 2
1152910186: RNCC: 5 | RNVC: 2
A4X4,5X20X10NR70: RNCC: 5 | RNVC: 2

13 Nov 1984

5340-12-334-3661
Retaining Strap

123343661
7873183: RNCC: 3 | RNVC: 2
78 73 183: RNCC: 5 | RNVC: 2

2 May 1994

5340-12-169-7538
Retaining Strap

121697538
LN29836B32: RNCC: 2 | RNVC: 2

6 Jun 1977

5340-12-381-2754
Butt Hinge Leaf

123812754
6025231: RNCC: 3 | RNVC: 2

28 Jan 2010

5340-12-359-0470
Mounting Plate

123590470
3818690011: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-374-8792
Angle Bracket

123748792
254 0099-801: RNCC: 3 | RNVC: 2
254 0099-801: RNCC: 5 | RNVC: 2

2 Apr 2008

5340-12-358-7665
Section Block Clamp

123587665
9412681288: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-330-3362
Snap Hook

123303362
903611-11: RNCC: 3 | RNVC: 2

3 Dec 1992

5340-12-329-0815
Resilient Mount

123290815
81326160002: RNCC: 3 | RNVC: 2
81.32616-0002: RNCC: 5 | RNVC: 2

17 Jul 1992

5340-12-190-3088
Metal Runner

121903088
5801544-012001.003: RNCC: 3 | RNVC: 2
5801544-012001-003: RNCC: 5 | RNVC: 2
5801544-012001.003: RNCC: 5 | RNVC: 9

19 Nov 1981

5340-12-196-7477
Retaining Strap

121967477
26217-001: RNCC: 3 | RNVC: 2
974: RNCC: 5 | RNVC: 9

10 Aug 1983

5340-12-386-6143
Self-Locking Insert

123866143
109422: RNCC: 3 | RNVC: 2
T1/109422: RNCC: 5 | RNVC: 2

15 Sep 2011

5340-12-339-3028
Resilient Mount

123393028
M100B: RNCC: 3 | RNVC: 2
M100B: RNCC: 3 | RNVC: 2
M100: RNCC: 5 | RNVC: 2
S05-05-0100: RNCC: 5 | RNVC: 2

7 Nov 1995

5340-12-356-6211
Mounting Plate

123566211
33036-003-001: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-349-0959
Butt Hinge Leaf

123490959
J52822831-001: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-12-190-4825
Electrical-Mechanical Equipment Post

121904825
C121-A44-C183: RNCC: 2 | RNVC: 2
VG95148C6XM3X12-NRST: RNCC: 2 | RNVC: 2
VG95148C6XM3X12-NRST: RNCC: 3 | RNVC: 2
CF 455 683: RNCC: 3 | RNVC: 2
CF 455 683: RNCC: 3 | RNVC: 2
CF455683: RNCC: 5 | RNVC: 2
CF455683: RNCC: 5 | RNVC: 2
C121-A44-C183: RNCC: 5 | RNVC: 2

1 Dec 1981

5340-12-364-6579
Mounting Bracket

123646579
2653-180060.000.0: RNCC: 2 | RNVC: 2
2653-180060.000.0: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-701-5141
Mounting Plate

127015141
VG95211-ML-127015141: RNCC: 2 | RNVC: 2
5.12.6100.1090.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-381-1246
Loop Clamp

123811246
DIN3016-1-D1-20X20-W1-EPDM: RNCC: 2 | RNVC: 2
1218 9987: RNCC: 3 | RNVC: 2
12189987: RNCC: 5 | RNVC: 2
CV169538: RNCC: 5 | RNVC: 2
05720348: RNCC: 5 | RNVC: 2
12189987: RNCC: 5 | RNVC: 9

13 Jan 2010

5340-12-358-6027
Mending Plate

123586027
5412340143: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-373-1674
Access Cover

123731674
9060110032: RNCC: 3 | RNVC: 2
906 011 00 32: RNCC: 5 | RNVC: 2
A9060110032: RNCC: 5 | RNVC: 9

5 Oct 2007

5340-12-341-1244
Access Cover

123411244
2782-260200.001.0: RNCC: 3 | RNVC: 2

31 Jul 1996

5340-12-365-3906
Mounting Bracket

123653906
2500194-230821.000.0: RNCC: 2 | RNVC: 2
2500194-230821.000.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-701-2059
Mounting Bracket

127012059
VG95211-ML-127012059: RNCC: 2 | RNVC: 2
5.12.0604.0490.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-9349
Mounting Plate

123599349
2500261-183400.028.0: RNCC: 2 | RNVC: 2
2500261-183400.028.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-332-9452
Loop Clamp

123329452
DIN3016-1-D1-29X12-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-29X12-W5: RNCC: 3 | RNVC: 2
RSGU1.29/12-W5: RNCC: 3 | RNVC: 2
Q 314 176 129: RNCC: 5 | RNVC: 2
RSGU1100.29/12-W5: RNCC: 5 | RNVC: 2
Q 314 176 129: RNCC: 5 | RNVC: 2
DIN3016-D1-29X12-W5: RNCC: 5 | RNVC: 9

8 Oct 1993

5340-12-403-7200

5340-12-413-3515

5340-12-138-0270
Loop Clamp

121380270
2208428121: RNCC: 3 | RNVC: 2
0150-22-25-02: RNCC: 5 | RNVC: 2
0336 3527: RNCC: 5 | RNVC: 2
3363527EZ0150-22: RNCC: 5 | RNVC: 2
0746-124: RNCC: 5 | RNVC: 2
8450205: RNCC: 5 | RNVC: 2
RE83-5-02: RNCC: 5 | RNVC: 2
3363527: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-381-5342
Mounting Bracket

123815342
SK976-977411.000.0: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-12-381-3541
Loop Clamp

123813541
DIN3016-1-D1-18X20-W5-NBR: RNCC: 2 | RNVC: 2

4 Feb 2010

5340-12-341-6824
Webbing Strap

123416824
4900059-212107.000.0: RNCC: 2 | RNVC: 2
4900059-212107.000.0: RNCC: 3 | RNVC: 2
DIN60060-2-44,5X1200X1350-C4/SCH: RNCC: 5 | RNVC: 9

15 Oct 1996

5340-12-324-0310
Nonmetallic Bumper

123240310
3512 712 64771: RNCC: 3 | RNVC: 2
3512 712 6477.1: RNCC: 5 | RNVC: 2
3512 712 6477: RNCC: 5 | RNVC: 2
PLATTE 50X24X2-NR42 NATURFARBEN: RNCC: 5 | RNVC: 2

17 Jan 1991

5340-12-700-9227
Loop Clamp

127009227
VG95211-ML-127009227: RNCC: 2 | RNVC: 2
200N-7-96: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-307-2674
Nonmetallic Bumper

123072674
DIN95364-E50X35-NR40ST: RNCC: 2 | RNVC: 2
55400801: RNCC: 3 | RNVC: 2
1.50.35.5E.40NR/ST: RNCC: 5 | RNVC: 2
554 008 01: RNCC: 5 | RNVC: 2
81155-50X35-M10.NR40.ST: RNCC: 5 | RNVC: 2
3865221/4: RNCC: 5 | RNVC: 2
38652BSTN4090: RNCC: 5 | RNVC: 2
VG95364-E50X35-NR40ST: RNCC: 5 | RNVC: 9

28 May 1986

5340-12-701-3086
Rod End Connector

127013086
VG95211-ML-127013086: RNCC: 2 | RNVC: 2
5.12.5101.6650.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-010-0873

5340-12-044-2154

5340-12-308-9743
Mending Plate

123089743
2859060370: RNCC: 3 | RNVC: 2

3 Dec 1986

5340-12-320-2198
Angle Bracket

123202198
NO PRIMARY REF 12-320-2198: RNCC: 3 | RNVC: 2
5802102-201400.05: RNCC: 5 | RNVC: 9
5802102-201400.05: RNCC: 5 | RNVC: 9

19 Dec 1989

5340-12-320-3266
Electrical-Mechanical Equipment Post

123203266
VG95148C5,5XM3X14-NRST: RNCC: 2 | RNVC: 2
SN61550-CM3X14-A2-70: RNCC: 3 | RNVC: 2
VG95148C5,5XM3X14-NRST: RNCC: 3 | RNVC: 2
H61550-C3140-R865: RNCC: 5 | RNVC: 2
C42315-A100-C308: RNCC: 5 | RNVC: 9

3 Jan 1990

5340-12-379-3778
Protection Bellows

123793778
138888-0046: RNCC: 3 | RNVC: 2
0000920296: RNCC: 5 | RNVC: 2
15008800: RNCC: 5 | RNVC: 2
0000920296: RNCC: 5 | RNVC: 2

17 Jul 2009

5340-12-349-2903
Angle Bracket

123492903
81974870519: RNCC: 3 | RNVC: 2
81.97487-0519: RNCC: 5 | RNVC: 2
81.97487.0519: RNCC: 5 | RNVC: 9

20 Oct 1999

5340-12-701-8304
Mounting Bracket

127018304
VG95211-ML-127018304: RNCC: 2 | RNVC: 2
5.99.0800.0440.00: RNCC: 3 | RNVC: 2
0501410054499: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-701-9487
Rod End Clevis

127019487
VG95211-ML-127019487: RNCC: 2 | RNVC: 2
5.12.5305.1420.03: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-318-7437
Mounting Bracket

123187437
605.73-01-02-00-009: RNCC: 3 | RNVC: 2
092099: RNCC: 5 | RNVC: 2

14 Aug 1989

5340-12-352-5867
Bow Handle

123525867
050-010117C: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-12-190-0241
Compression Cup

121900241
T35-7 35X21X8/2,5-88NBR/101: RNCC: 3 | RNVC: 2
T35-7: RNCC: 5 | RNVC: 2
T35-7-88NBR101: RNCC: 5 | RNVC: 2
5000053752: RNCC: 5 | RNVC: 2
75501410: RNCC: 5 | RNVC: 2
5000053752: RNCC: 5 | RNVC: 9

3 Nov 1981

5340-12-311-3083
Mending Plate

123113083
P-244239-017: RNCC: 3 | RNVC: 2
P244239-017: RNCC: 5 | RNVC: 2

14 Aug 1987

5340-12-301-5158
Bow Handle

123015158
1000163-371010.001.0: RNCC: 2 | RNVC: 2
1000163-371010.001.0: RNCC: 3 | RNVC: 2

20 Oct 1984

5340-12-319-4768
Angle Bracket

123194768
105-45401.12: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-345-0186
Flush Lock

123450186
3896WC-LINKS: RNCC: 3 | RNVC: 2

21 Jan 1998

5340-12-393-4999
Angle Bracket

123934999
4055013120: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-173-0987
Abstandsstueck

121730987
650926: RNCC: 3 | RNVC: 2
306-58-80-187-188: RNCC: 5 | RNVC: 2
81.27540-5001: RNCC: 5 | RNVC: 2
81275405001: RNCC: 5 | RNVC: 2
23251-067051-000-0: RNCC: 5 | RNVC: 9
23251-067051.000.0: RNCC: 5 | RNVC: 9

20 Mar 1978

5340-12-152-8368
Resilient Mount

121528368
535K08756/1: RNCC: 3 | RNVC: 2
845-535K08756: RNCC: 5 | RNVC: 2
535K08756: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-198-3315
Resilient Mount

121983315
5259549: RNCC: 3 | RNVC: 2
52-59549-1: RNCC: 5 | RNVC: 2
52595491: RNCC: 5 | RNVC: 2

16 Jan 1984

5340-12-317-8092
Dust And Moisture Seal Protective Cap

123178092
1-HP-050-5-00000-50-1-00-Z04: RNCC: 3 | RNVC: 2
HP-050-5-00000-50-1-00-Z04: RNCC: 5 | RNVC: 2

17 May 1989

5340-12-148-9654
Loop Clamp

121489654
DIN3016-1-A1-48X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-48X20-W1-2: RNCC: 3 | RNVC: 2
RS1.48/20: RNCC: 3 | RNVC: 2
4110020048: RNCC: 5 | RNVC: 2
RS1100-48-20: RNCC: 5 | RNVC: 2
RS1100.48/20: RNCC: 5 | RNVC: 2
23176-208000-85-0: RNCC: 5 | RNVC: 2
DIN3016-A1-48X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-A48X20-W1: RNCC: 5 | RNVC: 9
VG95931A48X20W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-371-3807
Double Angle Bracket

123713807
5.042-367.0: RNCC: 3 | RNVC: 2
5.042-367: RNCC: 5 | RNVC: 9

22 Mar 2007

5340-12-367-2181
Retaining Strap

123672181
AS211-140000.005.0: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-12-336-7429
Clamping Catch

123367429
6020024/6020027: RNCC: 3 | RNVC: 2
1-612204-001: RNCC: 5 | RNVC: 2
32032579: RNCC: 5 | RNVC: 2
1-612204-001: RNCC: 5 | RNVC: 2
1.612204-001: RNCC: 5 | RNVC: 2

16 Dec 1994

5340-12-380-3773
Mending Plate

123803773
5220980073: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-12-331-7062
Runner

123317062
121262: RNCC: 3 | RNVC: 2

9 Jun 1993

5340-12-360-0009
Mounting Bracket

123600009
9414292640: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-301-8941
Mending Plate

123018941
2989120496: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-357-5763
Dust And Moisture Seal Protective Plug

123575763
0009873444: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-12-044-0588

5340-12-357-5620
Retaining Band

123575620
49100021100: RNCC: 3 | RNVC: 2

2 Jul 2002

5340-12-357-8281
Angle Bracket

123578281
2300042-255201.001: RNCC: 2 | RNVC: 2
9940433: RNCC: 3 | RNVC: 2
2300042-255201.001: RNCC: 5 | RNVC: 2

30 Jul 2002

5340-12-129-9499
Einbau- Schlosz

5340-12-132-9137
Kugelzapfen Sitz

5340-12-329-2556
Angle Bracket

123292556
M546268: RNCC: 3 | RNVC: 9

29 Jul 1992

5340-12-122-8660
Dust And Moisture Seal Protective Cap

121228660
211405533: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-167-5816
Dust And Moisture Seal Protective Plug

121675816
211609163: RNCC: 3 | RNVC: 9

3 Jan 1977

5340-12-131-5496

5340-12-196-1199
Friction Catch

121961199
111827503G: RNCC: 3 | RNVC: 2

1 Jun 1983

5340-12-331-6332
Quick Release Plunger

123316332
2212.408: RNCC: 3 | RNVC: 2
2212-408: RNCC: 5 | RNVC: 2

2 Jun 1993

5340-12-350-1229
Rod End Connector

123501229
2125-111630.03B: RNCC: 2 | RNVC: 2
2125-111630.03B: RNCC: 3 | RNVC: 2

17 Feb 2000

5340-12-701-9957
Loop Clamp

127019957
VG95211-ML-127019957: RNCC: 2 | RNVC: 2
155N464-654: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-383-7745
Angle Bracket

123837745
601241-203900.01: RNCC: 2 | RNVC: 2
601241-203900.01: RNCC: 3 | RNVC: 2

7 Dec 2010

5340-12-328-9728
Rod End Clevis

123289728
204-076-268-5001: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-317-7669
Angle Bracket

123177669
P-297201-489: RNCC: 3 | RNVC: 2
P297201-489: RNCC: 5 | RNVC: 2

11 May 1989

5340-12-175-1119
Retaining Strap

121751119
R191: RNCC: 3 | RNVC: 2
H3220-F4X6 UNTERTEIL: RNCC: 3 | RNVC: 2
R0235: RNCC: 5 | RNVC: 2
H3220-F4X6 UNTERTEIL: RNCC: 5 | RNVC: 2
51.97401-0106: RNCC: 5 | RNVC: 2
51.97401-0380: RNCC: 5 | RNVC: 2
51974010106: RNCC: 5 | RNVC: 2
51974010380: RNCC: 5 | RNVC: 2
5000588505: RNCC: 5 | RNVC: 2
5000588505: RNCC: 5 | RNVC: 9

23 Aug 1978

5340-12-199-3770
Butt Hinge

121993770
160-24398-07: RNCC: 3 | RNVC: 2
160-24398-07: RNCC: 5 | RNVC: 2
160-24398.07: RNCC: 5 | RNVC: 2
160-24398.07: RNCC: 5 | RNVC: 9

19 Apr 1984

5340-12-701-3529
Mounting Bracket

127013529
VG95211-ML-127013529: RNCC: 2 | RNVC: 2
5.12.5111.4540.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-155-0914
Helical Compression Spring Seat

121550914
SN8-3-34-4: RNCC: 3 | RNVC: 2
SN8-3-34-4: RNCC: 5 | RNVC: 2
21C3807: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-388-8653
Dust And Moisture Seal Protective Plug

123888653
2315-1022: RNCC: 3 | RNVC: 2

2 May 2012

5340-12-333-8851
Mounting Plate

123338851
405-8-1: RNCC: 3 | RNVC: 2
405-8.1: RNCC: 5 | RNVC: 2

21 Feb 1994

5340-12-360-4217
Access Cover

123604217
E132524: RNCC: 3 | RNVC: 2

20 May 2003

5340-12-393-7240
Lock-Release Lever

123937240
G29302: RNCC: 3 | RNVC: 2

7 Oct 2013

5340-12-359-6097
Mounting Bracket

123596097
2500294-062: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-156-8475
Nonmetallic Bumper

121568475
1393001-10000.24: RNCC: 2 | RNVC: 2
1393001-10000-24: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-357-1451
Access Cover

123571451
2500261-090000.018.0: RNCC: 2 | RNVC: 2
2500261-090000.018.0: RNCC: 3 | RNVC: 2

13 May 2002

5340-12-370-5027
Access Cover

123705027
ED41-2016-00034-101: RNCC: 2 | RNVC: 2
ED41-2016-00034-101: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-12-373-1586
Block Clamp

123731586
RBP8-542: RNCC: 3 | RNVC: 2
RBP8-542: RNCC: 5 | RNVC: 2
8415-04526: RNCC: 6 | RNVC: 9

4 Oct 2007

5340-12-338-8026
Mounting Plate

123388026
6700017-203240.00: RNCC: 2 | RNVC: 2
6700017-203240.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-130-2531
Snap Hook

121302531
2901500H: RNCC: 3 | RNVC: 2
30-1 BLANK: RNCC: 3 | RNVC: 9
30-1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-360-1434
Recess Handle

123601434
1.63.0679.0: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-701-4957
Mounting Bracket

127014957
5.12.5850.1760.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-386-2511
Manual Control Lever

123862511
2481-391920.001.0: RNCC: 2 | RNVC: 2
2481-391920.001.0: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-12-002-1334

5340-12-004-3635

5340-12-176-8588
Retaining Strap

121768588
18211230587: RNCC: 3 | RNVC: 9

20 Dec 1978

5340-12-135-6746

5340-12-358-9625
Double Angle Bracket

123589625
2300042-188326.000: RNCC: 2 | RNVC: 2
2300042-188326.000: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-188-9258
Access Cover

121889258
2500075-197420.007.0: RNCC: 2 | RNVC: 2
2500075-197420.007.0: RNCC: 3 | RNVC: 2
2500075-197420-007-0: RNCC: 5 | RNVC: 9
2500075-197420-007-0: RNCC: 5 | RNVC: 9
2500075-197420.007.0: RNCC: 5 | RNVC: 9

10 Aug 1981

5340-12-386-5797
Mounting Plate

123865797
2500262-196000.001.0: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-326-4409
Loop Clamp

123264409
DIN3015-L-KP-3-R-21,3-PA6: RNCC: 2 | RNVC: 2
HRL3KP21,3PA: RNCC: 3 | RNVC: 2
RANR-3 R1/2": RNCC: 3 | RNVC: 2
321,3PA: RNCC: 3 | RNVC: 2
321-3PA: RNCC: 5 | RNVC: 2
RANR-3 R1/2": RNCC: 5 | RNVC: 2
DIN3015-L-KP-3-R-21,3-PA: RNCC: 5 | RNVC: 2
DIN3015-LKP3R-21,3PA: RNCC: 5 | RNVC: 2
321,3PA: RNCC: 5 | RNVC: 2

16 Sep 1991

5340-12-197-0917
Angle Bracket

121970917
1000154-000.02: RNCC: 2 | RNVC: 2
512.00-00.02: RNCC: 3 | RNVC: 2
1000154-0.02: RNCC: 5 | RNVC: 9

19 Sep 1983

5340-12-320-9892
Butt Hinge

123209892
2300269-185000.001.0: RNCC: 2 | RNVC: 2
790-10.20.111-25: RNCC: 3 | RNVC: 2

14 Mar 1990

5340-12-385-2215
Section Block Clamp

123852215
5849953068: RNCC: 3 | RNVC: 2

11 May 2011

5340-12-171-9901
Expansion Plug

121719901
PAN4315A06: RNCC: 3 | RNVC: 2

8 Dec 1977

5340-12-365-8618
Loop Clamp

123658618
LN9491BK65: RNCC: 2 | RNVC: 2

15 Feb 2005

5340-12-314-6736
Dust And Moisture Seal Protective Plug

123146736
0295 0747: RNCC: 3 | RNVC: 2
2950747: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-145-2724
Spannschlosz

5340-12-145-9178
Verbindungs Platte

5340-12-145-9211
Verbindungs Platte

5340-12-141-5294
Blatt- Feder

5340-12-141-9396
Daempfungs Adapter

5340-12-315-1899
Nonmetallic Bumper

123151899
6212850003: RNCC: 3 | RNVC: 2
621 285 00 03: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-356-2103
Nut And Bolt Locking Plate

123562103
5569940225: RNCC: 3 | RNVC: 2

1 Feb 2002

5340-12-040-5134

5340-12-372-8270
Elbow Catch

123728270
X053170.01: RNCC: 3 | RNVC: 2

24 Aug 2007

5340-12-313-4802
Spring Tension Clip

123134802
801-639.07.000.01: RNCC: 3 | RNVC: 2

7 Apr 1988

5340-12-317-0530
Rod End Clevis

123170530
3523230118: RNCC: 3 | RNVC: 2

7 Mar 1989

5340-12-343-0798
Lock-Release Lever

123430798
CF 842 254 BE: RNCC: 2 | RNVC: 2
CF 842 254 BE: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-158-7408
Expansion Plug

121587408
DIN443-30-ST-PHR: RNCC: 2 | RNVC: 2
0630 361 029: RNCC: 5 | RNVC: 2
30DIN443PHR: RNCC: 5 | RNVC: 2
0630361029: RNCC: 5 | RNVC: 2
0630361029: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-340-1326
Catch Strike

123401326
81976400175: RNCC: 3 | RNVC: 2
222623-4000: RNCC: 5 | RNVC: 2
2226234000: RNCC: 5 | RNVC: 2

2 Mar 1996

5340-12-702-8247
Nonmetallic Bumper

127028247
52-04007300797: RNCC: 2 | RNVC: 2

22 Dec 1995

5340-12-185-1982
Retaining Band

121851982
106-200-012: RNCC: 3 | RNVC: 2

20 Sep 1980

5340-12-702-8512
Support Hook

127028512
52-04066102977: RNCC: 2 | RNVC: 2

3 Jan 1996

5340-12-371-2890
Butt Hinge

123712890
3204-0001: RNCC: 2 | RNVC: 2
3204-0001: RNCC: 3 | RNVC: 2

9 Mar 2007

5340-12-356-7228
Double Angle Bracket

123567228
6028480: RNCC: 3 | RNVC: 2
6015.127.70.09.000: RNCC: 5 | RNVC: 9

27 Mar 2002

5340-12-370-1422
Spring Holder

123701422
862907701: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-12-169-6950
Dust And Moisture Seal Protective Plug

121696950
500B68: RNCC: 3 | RNVC: 2
GPN500B68: RNCC: 5 | RNVC: 2
500006800: RNCC: 5 | RNVC: 9
B68: RNCC: 5 | RNVC: 9
B68GPN500: RNCC: 5 | RNVC: 9
GPN500,B68: RNCC: 5 | RNVC: 9

3 Jun 1977

5340-12-315-3541
Sealing Plug Assembly

123153541
1463203419: RNCC: 3 | RNVC: 2
1463203419: RNCC: 5 | RNVC: 2
1463203352: RNCC: 5 | RNVC: 9

14 Oct 1988

5340-12-314-4571
Access Cover

123144571
3082 306 039: RNCC: 3 | RNVC: 2
3082306039: RNCC: 5 | RNVC: 2

8 Jul 1988

5340-12-335-5318
Retaining Strap

123355318
6179950120: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-12-381-1845
Access Cover

123811845
04114257: RNCC: 3 | RNVC: 2
04114257: RNCC: 5 | RNVC: 2
CV169549: RNCC: 5 | RNVC: 2
05729227: RNCC: 5 | RNVC: 2

19 Jan 2010

5340-12-303-2623
Angle Bracket

123032623
P-886763-003: RNCC: 3 | RNVC: 2
P886763-003: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-166-0508
Resilient Mount

121660508
DIN95363-E20X25-M6X8-NR55ST: RNCC: 2 | RNVC: 2
515007-M6X8.NR55.ST: RNCC: 5 | RNVC: 2
BE5-44-25N: RNCC: 5 | RNVC: 9
BE5.44-25N: RNCC: 5 | RNVC: 9
VG95363-E20X25-M6X8-NR55ST: RNCC: 5 | RNVC: 9

29 Jul 1976

5340-12-411-0599

5340-12-409-1694

5340-12-197-7388
Double Angle Bracket

121977388
A-920265-405: RNCC: 3 | RNVC: 2
A920265-405: RNCC: 5 | RNVC: 2

18 Nov 1983

5340-12-186-0833
Electrical-Mechanical Equipment Post

121860833
1246-461.3: RNCC: 2 | RNVC: 2
VG95148A5XM3X20-3.1645.51-EQE1SW: RNCC: 3 | RNVC: 2
1246-461.3: RNCC: 3 | RNVC: 2
1246-461-3: RNCC: 5 | RNVC: 2

27 Nov 1980

5340-12-326-0765
Plug Button

123260765
5801984-200262.008.0: RNCC: 2 | RNVC: 2
5801984-200262.008.0: RNCC: 3 | RNVC: 2
5801984-200262.008.0: RNCC: 5 | RNVC: 2

6 Aug 1991

5340-12-307-7172
Mending Plate

123077172
2500179-195400.000.0: RNCC: 2 | RNVC: 2
2500179-195400.000.0: RNCC: 3 | RNVC: 2

18 Jul 1986

5340-12-316-4011
Mounting Bracket

123164011
5801998-419000.00: RNCC: 2 | RNVC: 2
5801998-419000.00: RNCC: 3 | RNVC: 2
5801998-419000.00: RNCC: 5 | RNVC: 9

16 Jan 1989

5340-12-376-8071
Butt Hinge

123768071
401-0112-23-04-000: RNCC: 3 | RNVC: 2

10 Nov 2008

5340-12-331-2851
Bail Handle

123312851
DIN3136-135X105ZN8: RNCC: 2 | RNVC: 2
DIN3136-135X105-ZN8: RNCC: 3 | RNVC: 2
A135X105DIN3136GALZN9: RNCC: 5 | RNVC: 2
DIN3136-135X105-ZN8: RNCC: 5 | RNVC: 2
DIN3136A135X105: RNCC: 5 | RNVC: 2

16 Apr 1993

5340-12-302-0252
Double Angle Bracket

123020252
P-855977-407: RNCC: 3 | RNVC: 2
P855977-407: RNCC: 5 | RNVC: 2

28 Nov 1984

5340-12-187-2765
Angle Bracket

121872765
2300109-030000.008.0: RNCC: 2 | RNVC: 2
2300109-030000.008.0: RNCC: 3 | RNVC: 2
2300109-030000-008-0: RNCC: 5 | RNVC: 9
2300109-030000.008.0: RNCC: 5 | RNVC: 9
2300109-030000-008-0: RNCC: 5 | RNVC: 9

26 Mar 1981

5340-12-135-6866
Door Button

121356866
NO PRIMARY REF 12-135-6866: RNCC: 3 | RNVC: 2
DIN-HNABT131-3-3,2MMDX30MMLG-MS: RNCC: 5 | RNVC: 9
MS3-2MMDX30LGDINHNABT131-3: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-5988
Retaining Strap

123155988
DIN3016-1-F1-32X20-W5-CR: RNCC: 2 | RNVC: 2
RSGU2.32/20-W5: RNCC: 3 | RNVC: 2
DIN3016-F1-32X20-W5: RNCC: 3 | RNVC: 2
DIN3016-F1-32X20-W5: RNCC: 5 | RNVC: 9
VG95931F32X20W5: RNCC: 5 | RNVC: 9

11 Nov 1988

5340-12-701-5710
Mounting Plate

127015710
VG95211-ML-127015710: RNCC: 2 | RNVC: 2
5.12.6149.0230.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-364-8536
Angle Bracket

123648536
5600023-190280.001.0: RNCC: 2 | RNVC: 2
5600023-190280.001.0: RNCC: 3 | RNVC: 2

9 Nov 2004

5340-12-700-9132
Mounting Bracket

127009132
VG95211-ML-127009132: RNCC: 2 | RNVC: 2
2.20.6409.0080.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-314-3141
Mounting Bracket

123143141
39-1994-000000.00.0: RNCC: 3 | RNVC: 2
CF 802 201-X: RNCC: 3 | RNVC: 2
CF 802 201-X: RNCC: 5 | RNVC: 2
CF 802 201-X: RNCC: 5 | RNVC: 2

24 Jun 1988

5340-12-365-3721
Angle Bracket

123653721
2300425-060000.059.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-702-3834
Rod End Connector

127023834
VG95211-ML-127023834: RNCC: 2 | RNVC: 2
5.12.5101.8890: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-703-3228
Mounting Bracket

127033228
VG95211-ML-127033228: RNCC: 2 | RNVC: 2
5.12.6500.8060.00: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-702-4553
Mounting Bracket

127024553
VG95211-ML-127024553: RNCC: 2 | RNVC: 2
5.51.0602.1790.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-319-5357
Rod End Clevis

123195357
5801411-690572.001: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-12-337-1885
Angle Bracket

123371885
615.06-04-01-03-003: RNCC: 3 | RNVC: 2

31 Jan 1995

5340-12-192-3168
Snap Hook

121923168
DIN5299-A80ZN: RNCC: 2 | RNVC: 2
A80DIN5299VERZINKT: RNCC: 5 | RNVC: 2
5001 1/2-80 VERZINKT: RNCC: 5 | RNVC: 9
DX-5001 1/2-80 VERZINKT: RNCC: 5 | RNVC: 9
YDX-5001 1/2-80 VERZINKT: RNCC: 5 | RNVC: 9

13 Apr 1982

5340-12-385-1651
Access Cover

123851651
5500140133: RNCC: 3 | RNVC: 2

6 May 2011

5340-12-302-7904
Support Hook

123027904
178.E76.80A-20: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-354-8627
Lock Key

123548627
284073235: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-163-7409
Loop Clamp

121637409
LN9491BM14: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-177-0718
Loop Clamp

121770718
PAN4231CCN6137: RNCC: 3 | RNVC: 2

12 Jan 1979

5340-12-700-8530
Loop Clamp

127008530
VG95211-ML-127008530: RNCC: 2 | RNVC: 2
155N1119-505-51: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-362-7275
Rod End Connector

123627275
2500261-993230.003.0: RNCC: 2 | RNVC: 2
2500261-993230.003.0: RNCC: 3 | RNVC: 2

24 Mar 2004

5340-12-376-9165
Spring Tension Clip

123769165
130001: RNCC: 3 | RNVC: 2
400-820.1012.4: RNCC: 5 | RNVC: 2

21 Nov 2008

5340-12-331-8210
Butt Hinge

123318210
P-244264-413: RNCC: 3 | RNVC: 2
P244264-413: RNCC: 5 | RNVC: 2
P-244264-413: RNCC: 5 | RNVC: 2

24 Jun 1993

5340-12-311-5170
Access Cover

123115170
302360-008200.000.0: RNCC: 2 | RNVC: 2
302360-008200.000.0: RNCC: 5 | RNVC: 9

11 Sep 1987

5340-12-702-5531
Mounting Plate

127025531
VG95211-ML-127025531: RNCC: 2 | RNVC: 2
5.51.7220.0250.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-703-2085
Mounting Bracket

127032085
VG95211-ML-127032085: RNCC: 2 | RNVC: 2
5.12.6114.3230.07: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-317-9605
Butt Hinge Leaf

123179605
704-125227-000-0: RNCC: 3 | RNVC: 2

30 May 1989

5340-12-303-0267
Retaining Strap

123030267
2500135-194500.003.0: RNCC: 2 | RNVC: 2
2500135-194500.003.0: RNCC: 3 | RNVC: 2

21 Feb 1985

5340-12-151-2265
Ball Socket Seat

121512265
1344-01-03-03-13: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-195-9743
Angle Bracket

121959743
160-24253-02: RNCC: 3 | RNVC: 2
160-24253-02: RNCC: 5 | RNVC: 9

10 May 1983

5340-12-199-3774
Spring Tension Clip

121993774
160-25079-42: RNCC: 3 | RNVC: 2
160-25079.42: RNCC: 5 | RNVC: 2
160-25079-42: RNCC: 5 | RNVC: 2
160-25079.42: RNCC: 5 | RNVC: 9

19 Apr 1984

5340-12-304-4119
Mending Plate

123044119
5012890045: RNCC: 3 | RNVC: 2

15 Jul 1985

5340-12-042-1179

5340-12-021-7903

5340-12-392-2760
Section Block Clamp

123922760
DW B02 127 A: RNCC: 3 | RNVC: 2
DW B02 127 A: RNCC: 5 | RNVC: 2

23 May 2013

5340-12-338-7880
Mounting Bracket

123387880
2300298-972000.003.0: RNCC: 3 | RNVC: 2

24 Aug 1995

5340-12-307-6863
Electrical-Mechanical Equipment Post

123076863
RP650593: RNCC: 3 | RNVC: 2

16 Jul 1986

5340-12-312-5496
Plain Solid Disk

123125496
7202770074: RNCC: 3 | RNVC: 2

18 Jan 1988

5340-12-196-6981
Folding Stay

121966981
301LINKS: RNCC: 3 | RNVC: 2

3 Aug 1983

5340-12-356-1945
Snap-In Plain Standoff

123561945
2339-240200A00C: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-12-162-8914

5340-12-390-3222
Dust And Moisture Seal Protective Cap

123903222
4253211: RNCC: 3 | RNVC: 2
4253211: RNCC: 5 | RNVC: 2

30 Oct 2012

5340-12-304-0043
Dust And Moisture Seal Protective Plug

123040043
057217-635: RNCC: 3 | RNVC: 2

30 May 1985

5340-12-309-3094
Dust And Moisture Seal Protective Cap

123093094
060379: RNCC: 3 | RNVC: 2
06.71819.0118: RNCC: 5 | RNVC: 2
06718190118: RNCC: 5 | RNVC: 2

13 Jan 1987

5340-12-347-8164
Manual Control Lever

123478164
2300405-181550.000: RNCC: 2 | RNVC: 2
9921640: RNCC: 3 | RNVC: 2
2300405-181550.000: RNCC: 5 | RNVC: 2
2300405-181550.000: RNCC: 5 | RNVC: 9
9921640: RNCC: 5 | RNVC: 9

17 Feb 1999

5340-12-333-2354
Loop Clamp

123332354
SPGU6011.113/30SK: RNCC: 3 | RNVC: 2
181 6011 113: RNCC: 5 | RNVC: 2
SPGU 6011.113/30SK: RNCC: 5 | RNVC: 2
1531316001: RNCC: 5 | RNVC: 2

12 Nov 1993

5340-12-151-5042
Lock-Release Lever

121515042
23111-6022.00: RNCC: 2 | RNVC: 2
23111-6022-00: RNCC: 5 | RNVC: 2
23111-6022-00: RNCC: 5 | RNVC: 9
23111-6022-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-148-7693
Loop Clamp

121487693
2101310000: RNCC: 3 | RNVC: 2
40310758309: RNCC: 5 | RNVC: 2
ZBE104-29Z: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-162-5883
Resilient Mount

121625883
30-79702-0017: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-332-4821
Mounting Bracket

123324821
2653-185740.00: RNCC: 2 | RNVC: 2
2653-185740.00: RNCC: 3 | RNVC: 2

16 Aug 1993

5340-12-388-1732
Shimmy Damper

123881732
F1.1697-00-01-11.00-04: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-12-366-4646
Loop Clamp

123664646
2166 4127-124: RNCC: 3 | RNVC: 2
2166 4127-124: RNCC: 5 | RNVC: 2

27 Apr 2005

5340-12-187-4584
Angle Bracket

121874584
2300109-060000.011.0: RNCC: 2 | RNVC: 2
2300109-060000.011.0: RNCC: 3 | RNVC: 2
2300109-060000.011.0: RNCC: 3 | RNVC: 2
2300109-060000.011.0: RNCC: 5 | RNVC: 9
2300109-060000-011-0: RNCC: 5 | RNVC: 9
2300109-060000-011-0: RNCC: 5 | RNVC: 9
2300109-060000-011-0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-325-2511
Spring Loaded Cylinder Fastener

123252511
5802233-010406.000: RNCC: 2 | RNVC: 2
7800011450: RNCC: 3 | RNVC: 2
5802233-010406.000: RNCC: 5 | RNVC: 9
78000 11450: RNCC: 5 | RNVC: 9

22 May 1991

5340-12-181-5300
Platte

121815300
5800748-1150: RNCC: 3 | RNVC: 2

29 Nov 1979

5340-12-373-2432
Dust And Moisture Seal Protective Plug

123732432
SRL19X1,0-2,0: RNCC: 3 | RNVC: 2
SRL19X1,0-2,0 SCHWARZ: RNCC: 5 | RNVC: 2
D0111135-001: RNCC: 5 | RNVC: 2

12 Oct 2007

5340-12-329-8139
Quick Release Plunger

123298139
GN616-M4-S: RNCC: 3 | RNVC: 2
AM4HWN206I: RNCC: 3 | RNVC: 2
03040-04: RNCC: 3 | RNVC: 2
RBN410.2-M4: RNCC: 3 | RNVC: 2
1604001: RNCC: 3 | RNVC: 2
NLM304-04: RNCC: 5 | RNVC: 9
NLM3040-04: RNCC: 5 | RNVC: 9

2 Oct 1992

5340-12-378-5489
Permanent Magnet

123785489
81971070009: RNCC: 3 | RNVC: 2
81.97107-0009: RNCC: 5 | RNVC: 2
Y04/74045/00: RNCC: 5 | RNVC: 2

21 Apr 2009

5340-12-173-4568
Loop Clamp

121734568
PAN4195-50: RNCC: 3 | RNVC: 2

18 Apr 1978

5340-12-369-4449
Mechanic Equipment Hardware Kit

123694449
A70-0007: RNCC: 3 | RNVC: 2

5 Jul 2006

5340-12-377-2369
Access Cover

123772369
0425 1600: RNCC: 3 | RNVC: 2

18 Dec 2008

5340-12-386-0563
Rod End Connector

123860563
869101301: RNCC: 3 | RNVC: 2

4 Aug 2011

5340-12-391-8662
Mounting Bracket

123918662
5070000-830000.001.0: RNCC: 3 | RNVC: 2

15 Apr 2013

5340-12-392-4868
Access Cover

123924868
027501001: RNCC: 3 | RNVC: 2

12 Jun 2013

5340-12-370-6103
T Bracket

123706103
868024302: RNCC: 2 | RNVC: 2
868024302: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-12-356-8860
Headless Straight Rod

123568860
4035292: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-12-340-9251
Dust And Moisture Seal Protective Cap

123409251
868 949: RNCC: 3 | RNVC: 2
868949: RNCC: 5 | RNVC: 2

4 Jul 1996

5340-12-345-4884
Access Cover

123454884
4139 301 199: RNCC: 3 | RNVC: 2
4139301199: RNCC: 5 | RNVC: 9

24 Mar 1998

5340-12-177-6561
Retaining Band

121776561
4426700018: RNCC: 3 | RNVC: 2

12 Feb 1979

5340-12-178-1121
Retaining Strap

121781121
4021590840: RNCC: 3 | RNVC: 2

22 Mar 1979

5340-12-344-1891
Mounting Bracket

123441891
454-250700.018: RNCC: 3 | RNVC: 2
454-250700.018: RNCC: 5 | RNVC: 9
9892695: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-12-309-7099
Handle Grip

123097099
GN319.2-32-M8: RNCC: 3 | RNVC: 2

18 Feb 1987

5340-12-303-9870
Loop Clamp

123039870
DIN3016-1-D2-5-12X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-5-12X12-W1-2: RNCC: 3 | RNVC: 2
RSGU1.5-12/12: RNCC: 3 | RNVC: 2
4218075000: RNCC: 5 | RNVC: 2
RSGU1100.5-12/12: RNCC: 5 | RNVC: 2
DIN3016-D2-5-12X12-W1-2: RNCC: 5 | RNVC: 9

29 May 1985

5340-12-700-3004
Rod End Clevis

127003004
51-261104064: RNCC: 2 | RNVC: 2
765.52.55: RNCC: 3 | RNVC: 2
765-52-55: RNCC: 5 | RNVC: 9

4 Dec 1991

5340-12-383-7749
Dust And Moisture Seal Protective Cap

123837749
S81016-00: RNCC: 3 | RNVC: 2

7 Dec 2010

5340-12-147-1576
Retaining Clip

121471576
2650528: RNCC: 3 | RNVC: 2
2650-528: RNCC: 5 | RNVC: 2
3130005: RNCC: 5 | RNVC: 2
53070: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-323-8483
Electrical-Mechanical Equipment Post

123238483
C22107-A300-C36: RNCC: 3 | RNVC: 2

27 Dec 1990

5340-12-344-5902
Butt Hinge Leaf

123445902
J5282007-001: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-12-314-5920
Angle Bracket

123145920
512214-2404.000: RNCC: 3 | RNVC: 2
512214-2404: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-12-164-3050
Retaining Strap

121643050
23290-031012.003: RNCC: 2 | RNVC: 2
23290-031012.003: RNCC: 3 | RNVC: 2
23290-031012.003: RNCC: 5 | RNVC: 9
HT09/3891/03: RNCC: 5 | RNVC: 9
23290-031012.003: RNCC: 5 | RNVC: 9
23290-031012-003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-392-6118
Bow Handle

123926118
10501-028: RNCC: 3 | RNVC: 2

21 Jun 2013

5340-12-177-5136
Manual Control Handle

121775136
2300002-185230.000: RNCC: 2 | RNVC: 2
2300002-185230.000: RNCC: 3 | RNVC: 2
2300002-185230: RNCC: 5 | RNVC: 2
2300002-185230: RNCC: 5 | RNVC: 9
2300002-185230: RNCC: 5 | RNVC: 9
2300002-185230: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-148-9296
Nonmetallic Bumper

121489296
23176-262121.01.0: RNCC: 2 | RNVC: 2
23176-262121-01-0: RNCC: 5 | RNVC: 2
23176-262121-01-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-1112
Electrical-Mechanical Equipment Post

123051112
4900059-111126.004.0: RNCC: 3 | RNVC: 2
1228232: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-165-8594
Double Angle Bracket

121658594
25704-190000.46.0: RNCC: 2 | RNVC: 2
25704-190000.46.0: RNCC: 3 | RNVC: 2
25704-190000-46-0: RNCC: 5 | RNVC: 2
25704-190000-46-0: RNCC: 5 | RNVC: 9
25704-190000.46.0: RNCC: 5 | RNVC: 9

3 Jul 1976

5340-12-344-4465
Mending Plate

123444465
P-296814-047: RNCC: 3 | RNVC: 2
P296814-047: RNCC: 5 | RNVC: 2

28 Oct 1997

5340-12-199-9033
Webbing Strap

121999033
79026/053-0300: RNCC: 3 | RNVC: 2
220-00-0052-4: RNCC: 5 | RNVC: 2
79026/053-300: RNCC: 5 | RNVC: 2

15 Jun 1984

5340-12-393-6414
Access Cover

123936414
11.07051-0099: RNCC: 3 | RNVC: 2
11.07051-0099: RNCC: 5 | RNVC: 2

30 Sep 2013

5340-12-331-6879
Mounting Bracket

123316879
480-7397-26-10-00: RNCC: 3 | RNVC: 2
480/7397-26-10-00: RNCC: 5 | RNVC: 2

8 Jun 1993

5340-12-393-8332
Section Block Clamp

123938332
T290M2202288: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-12-378-7497
Hand Crank

123787497
208935: RNCC: 3 | RNVC: 2

8 May 2009

5340-12-360-4123
Mounting Bracket

123604123
3514363508: RNCC: 3 | RNVC: 2
3514363508: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-380-9457
Bail Handle

123809457
2500262-259700.000.0: RNCC: 2 | RNVC: 2
2500262-259700.000.0: RNCC: 3 | RNVC: 2

15 Dec 2009

5340-12-163-9482
Dust And Moisture Seal Protective Cap

121639482
688015741: RNCC: 3 | RNVC: 2
15741: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-8574
T Bracket

123058574
23111-6170.01: RNCC: 2 | RNVC: 2
100.302.00.01: RNCC: 3 | RNVC: 2

27 Dec 1985

5340-12-388-7019
Lock-Release Lever

123887019
GN99.2.13.M8-M: RNCC: 3 | RNVC: 2

16 Apr 2012

5340-12-358-9745
Access Cover

123589745
2500273-324500.00.0: RNCC: 2 | RNVC: 2
2500273-324500.00.0: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-320-7037
Mounting Bracket

123207037
CF 339 405 A: RNCC: 2 | RNVC: 2
CF 339 405 A: RNCC: 3 | RNVC: 2
CF 339 405 A: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-388-1838
Section Block Clamp

123881838
1030105-206300.003.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-123-3129
Webbing Strap

121233129
B5565-18-13-40: RNCC: 3 | RNVC: 2
5565-18-13.40: RNCC: 5 | RNVC: 2
5565-18-13-40: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-360-3507
Manual Control Handle

123603507
0009310801: RNCC: 3 | RNVC: 2
0009310801: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-360-3014
Mounting Bracket

123603014
1804462524: RNCC: 3 | RNVC: 2
1804462524: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-368-7816
Loop Clamp

123687816
5664856339: RNCC: 3 | RNVC: 2
02 018 00 902: RNCC: 5 | RNVC: 2

19 Apr 2006

5340-12-197-0526
Retaining Strap

121970526
6100.011.4: RNCC: 3 | RNVC: 2

14 Sep 1983

5340-12-010-8640

5340-12-370-7355
Mending Plate

123707355
453 8712-801: RNCC: 3 | RNVC: 2

14 Dec 2006

5340-12-302-5457
Pad Eye

123025457
3230008: RNCC: 3 | RNVC: 2
124962: RNCC: 5 | RNVC: 2

11 Jan 1985

5340-12-319-9585
Flare Lock Fastener

123199585
105840: RNCC: 3 | RNVC: 2

21 Nov 1989

5340-12-374-4825
Rod End Clevis

123744825
L521M1817205: RNCC: 3 | RNVC: 2

21 Feb 2008

5340-12-340-7523
Nonmetallic Bumper

123407523
6700021-202110.00: RNCC: 2 | RNVC: 2
6700021-202110.00: RNCC: 3 | RNVC: 2

5 Jun 1996

5340-12-188-4250
Swivel Caster

121884250
1475DHK050P30: RNCC: 3 | RNVC: 2
71-08-001-005: RNCC: 5 | RNVC: 2
C72123-Z753-R3: RNCC: 5 | RNVC: 2
C72123Z357R3: RNCC: 5 | RNVC: 2

8 Jul 1981

5340-12-194-4498
Bow Handle

121944498
62.6637.150.03-A001: RNCC: 3 | RNVC: 2
55563: RNCC: 5 | RNVC: 2
62-6637-150-03A001: RNCC: 5 | RNVC: 9

4 Nov 1982

5340-12-354-3988
Double Angle Bracket

123543988
J36120044-003: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-12-196-9029
Angle Bracket

121969029
A-295127-003: RNCC: 3 | RNVC: 2
A295127-003: RNCC: 5 | RNVC: 2

30 Aug 1983

5340-12-381-0342
Mounting Bracket

123810342
9999075-971000.200.0: RNCC: 3 | RNVC: 2

30 Dec 2009

5340-12-353-3580
Dust And Moisture Seal Protective Plug

123533580
600B605: RNCC: 3 | RNVC: 2
GPN600B605: RNCC: 5 | RNVC: 2
9109A0004-01: RNCC: 5 | RNVC: 2

14 Mar 2001

5340-12-191-8555
Nonmetallic Bumper

121918555
DIN95364-A50X20-M12X25-NR55ST: RNCC: 2 | RNVC: 2
V3-50A4456: RNCC: 5 | RNVC: 2
V3/0-55 SHORE A: RNCC: 5 | RNVC: 2
V3-50A4456: RNCC: 5 | RNVC: 2
C 3695 673 EC: RNCC: 5 | RNVC: 2
C 3695 673 EC: RNCC: 5 | RNVC: 2
C3695673EC: RNCC: 5 | RNVC: 2
530000-50X20-M12X25.NR55.ST: RNCC: 5 | RNVC: 2
C3695673EC: RNCC: 5 | RNVC: 9
VG95364-A50X20-M12X25-NR55ST: RNCC: 5 | RNVC: 9

15 Mar 1982

5340-12-156-9253
Butt Hinge

121569253
DIN7956-40X1,25-30-ST-BK-U-175: RNCC: 2 | RNVC: 2
13 05/40-175MM: RNCC: 3 | RNVC: 2
1305C40MMX175MMLANG: RNCC: 3 | RNVC: 2
C40X1,25X175DIN7956-ST: RNCC: 5 | RNVC: 2
C40X1-25X175DIN7956ST: RNCC: 5 | RNVC: 2
13 05/40: RNCC: 5 | RNVC: 2
04-2-9256-13: RNCC: 5 | RNVC: 9
DIN7956-40X1,25-30-ST-BK-U: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-3580
Angle Bracket

123063580
A-296856-401: RNCC: 3 | RNVC: 2
A296856-401: RNCC: 5 | RNVC: 2

24 Feb 1986

5340-12-182-6899
Retaining Strap

121826899
DIN3016-1-C1-17X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-C1-17X15-W1-2: RNCC: 3 | RNVC: 2
RS2.17/15: RNCC: 3 | RNVC: 2
4120015017: RNCC: 5 | RNVC: 2
RS1200-17-15: RNCC: 5 | RNVC: 2
RS1200.17/15: RNCC: 5 | RNVC: 2
VG95931-C17X15-W1: RNCC: 5 | RNVC: 2
DIN3016-C1-17X15-W1-2: RNCC: 5 | RNVC: 9
VG95931C17X15W1: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-12-320-7451
Access Cover

123207451
P-865102-403: RNCC: 3 | RNVC: 2
P865102-403: RNCC: 5 | RNVC: 2

12 Feb 1990

5340-12-198-0201
Angle Bracket

121980201
A-296712-141: RNCC: 3 | RNVC: 2
A296712-141: RNCC: 5 | RNVC: 2

12 Dec 1983

5340-12-161-9949
Loop Clamp

121619949
DIN3016-1-A1-40X12-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-40X12-W1-2: RNCC: 3 | RNVC: 2
RS1.40/12: RNCC: 3 | RNVC: 2
4110012040: RNCC: 5 | RNVC: 2
RS1100.40/12: RNCC: 5 | RNVC: 2
RS1100-40-12: RNCC: 5 | RNVC: 2
DIN3016-A1-40X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-A40X12-W1: RNCC: 5 | RNVC: 9
VG95931A40X12W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-351-7011
Access Cover

123517011
6301.150.000.071: RNCC: 3 | RNVC: 2

16 Aug 2000

5340-12-325-7494
Angle Bracket

123257494
2300002-122700.001: RNCC: 2 | RNVC: 2
2300002-122700.001: RNCC: 3 | RNVC: 2
2300002-122700.001: RNCC: 5 | RNVC: 9
9832622: RNCC: 5 | RNVC: 9
2300002-122700.001: RNCC: 5 | RNVC: 9

4 Jul 1991

5340-12-348-8936
Blank Panel

123488936
V6590-01001-043: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-372-7859
Dust And Moisture Seal Protective Cap

123727859
5352-211250A00C: RNCC: 3 | RNVC: 2

21 Aug 2007

5340-12-356-7045
Rod End Clevis

123567045
33036-003-019: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-366-7612
Helical Compression Spring Seat

123667612
2300421-161000.003: RNCC: 2 | RNVC: 2
2300421-161000.003: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-12-324-4384
Mounting Bracket

123244384
1890597-10610.00: RNCC: 3 | RNVC: 2

15 Feb 1991

5340-12-313-0549
Bridge Clamp

123130549
401839-00: RNCC: 3 | RNVC: 2
9XB401839-00: RNCC: 5 | RNVC: 2

1 Mar 1988

5340-12-340-6278
Mounting Bracket

123406278
VG95211-ML-123406278: RNCC: 2 | RNVC: 2
ED88-0274-00001-043: RNCC: 3 | RNVC: 2

14 May 1996

5340-12-366-7351
Mounting Bracket

123667351
187406803: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-12-011-5039

5340-12-345-9907
Angle Bracket

123459907
1204 6614: RNCC: 3 | RNVC: 2
12046614KZ0112-16: RNCC: 5 | RNVC: 2
3.603.0.637.005.5: RNCC: 5 | RNVC: 9

27 May 1998

5340-12-309-4074
Angle Bracket

123094074
WW 419 750 B: RNCC: 2 | RNVC: 2
WW 419 750 B: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-364-1545
Dirt And Liquid Deflector

123641545
375132: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-12-302-7039
Expansion Plug

123027039
178.E2.80B-142: RNCC: 3 | RNVC: 2

24 Jan 1985

5340-12-317-2476
Mounting Bracket

123172476
53749-001: RNCC: 3 | RNVC: 2
53 749-001: RNCC: 5 | RNVC: 9

21 Mar 1989

5340-12-313-5697
Metal Runner

123135697
6100108-1720.01: RNCC: 2 | RNVC: 2
6100108-1720.01: RNCC: 3 | RNVC: 2

16 Apr 1988

5340-12-314-1036
Mounting Bracket

123141036
A10-37-371-00-0: RNCC: 3 | RNVC: 2
A10-37-371-00-0: RNCC: 5 | RNVC: 9
85-693-6938: RNCC: 6 | RNVC: 9

7 Jun 1988

5340-12-701-5101
Loop Clamp

127015101
VG95211-ML-127015101: RNCC: 2 | RNVC: 2
5.12.6100.0794.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-302-8393
Mending Plate

123028393
1000128-0000.03: RNCC: 2 | RNVC: 2
49.008.00000.03E: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-186-8807
Bail Handle

121868807
DIN3136-100X80BK: RNCC: 2 | RNVC: 2
DIN3136-100X80-BK: RNCC: 3 | RNVC: 2
A100X80DIN3136: RNCC: 5 | RNVC: 2

16 Feb 1981

5340-12-142-5075
Loop Clamp

121425075
DIN71555-70,5-PHOSPHATIERT: RNCC: 2 | RNVC: 2
DIN71555-70,5-PHOSPHATIERT: RNCC: 3 | RNVC: 2
70,5/71555PH: RNCC: 3 | RNVC: 2
70-5DIN71555PHRE: RNCC: 5 | RNVC: 2
5500200070: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-177-2795
Mending Plate

121772795
2300002-033210.000: RNCC: 2 | RNVC: 2
2300002-033210.000: RNCC: 3 | RNVC: 2
2300002-033210: RNCC: 5 | RNVC: 9
2300002-033210: RNCC: 5 | RNVC: 9

24 Jan 1979

5340-12-365-4908
Handwheel

123654908
DIN950-V315X19-GG-A: RNCC: 2 | RNVC: 2
DIN950-GG-315-V19-A: RNCC: 5 | RNVC: 2

10 Jan 2005

5340-12-338-7268
Access Cover

123387268
6700017-201700.01: RNCC: 2 | RNVC: 2
6700017-201700.01: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-12-190-3353
Retaining Clip

121903353
0224782: RNCC: 3 | RNVC: 2
65F1.17-5: RNCC: 5 | RNVC: 2
65F1-17-5: RNCC: 5 | RNVC: 9

23 Nov 1981

Load More Results