What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 24 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 24 of 178

5340-12-170-1559
Retaining Strap

121701559
81974010697: RNCC: 3 | RNVC: 2
2X22-6M7-750-60: RNCC: 5 | RNVC: 2
81.97401.0697: RNCC: 5 | RNVC: 2
23250-144616-001-0: RNCC: 5 | RNVC: 9

29 Jun 1977

5340-12-182-9949
Rod End Connector

121829949
23223-395000-07-0: RNCC: 2 | RNVC: 2
23223-395000-07-0: RNCC: 5 | RNVC: 2
23223-395000.07.0: RNCC: 5 | RNVC: 2
23223-395000.07.0: RNCC: 5 | RNVC: 9

13 Mar 1980

5340-12-702-4281
Mounting Bracket

127024281
VG95211-ML-127024281: RNCC: 2 | RNVC: 2
5.12.7801.1001.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-383-8223
Loop Clamp

123838223
DIN3016-1-D1-28X15-W5-EPDM: RNCC: 2 | RNVC: 2
06673002829: RNCC: 3 | RNVC: 2
06.67300-2829: RNCC: 5 | RNVC: 2
06673002829: RNCC: 5 | RNVC: 2
06.67300-2829: RNCC: 5 | RNVC: 2

10 Dec 2010

5340-12-702-0028
Loop Clamp

127020028
VG95211-ML-127020028: RNCC: 2 | RNVC: 2
1667S50-13,5: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-306-7212
Compression Cup

123067212
H45-5-88NBR/101: RNCC: 3 | RNVC: 2

24 Mar 1986

5340-12-324-8470
Electrical-Mechanical Equipment Post

123248470
VG95148C5XM2X10,2-NRST: RNCC: 2 | RNVC: 2
8450029185: RNCC: 3 | RNVC: 2
84500 29185: RNCC: 5 | RNVC: 9

27 Mar 1991

5340-12-308-2943
Angle Bracket

123082943
P-875452-001: RNCC: 3 | RNVC: 2
P875452-001: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-144-5696
Retaining Strap

121445696
1205 4801: RNCC: 3 | RNVC: 2
12054801: RNCC: 5 | RNVC: 2
30.3214-01.4: RNCC: 5 | RNVC: 2
30-3214-01-4: RNCC: 5 | RNVC: 9
30.3214-01.4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-7175
Angle Bracket

127017175
VG95211-ML-127017175: RNCC: 2 | RNVC: 2
5.12.7601.8172.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-333-5528
Spring Tension Clip

123335528
G32960-W0183-C254: RNCC: 3 | RNVC: 2

5 Jan 1994

5340-12-317-4627
Mending Plate

123174627
3787321EE3481-02: RNCC: 3 | RNVC: 2
151-420000-903-0: RNCC: 5 | RNVC: 2
151-420000-903-0: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-12-373-0319
Loop Clamp

123730319
RAPR-538: RNCC: 3 | RNVC: 2

19 Sep 2007

5340-12-169-2149
Nonmetallic Bumper

121692149
C20365A16C188: RNCC: 3 | RNVC: 2
C20365-A16-C188: RNCC: 5 | RNVC: 2
TFS44-98974: RNCC: 5 | RNVC: 2
TTPK16T188: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-192-0224
Spring Holder

121920224
31-0127-1100.02: RNCC: 2 | RNVC: 2
31-0127-1100.02: RNCC: 3 | RNVC: 2
A10044: RNCC: 5 | RNVC: 2
31-0127-1100-02: RNCC: 5 | RNVC: 2
31-0127-1100-02: RNCC: 5 | RNVC: 9

22 Mar 1982

5340-12-198-1433
Mending Plate

121981433
5801999-210000.04: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-356-2696
Mounting Bracket

123562696
11.05700-0294POS024: RNCC: 3 | RNVC: 2
D11.41943-0023: RNCC: 5 | RNVC: 2

6 Feb 2002

5340-12-382-9163
Extension Drawer Slide

123829163
DZ5321-0110: RNCC: 3 | RNVC: 2

24 Aug 2010

5340-12-701-9955
Loop Clamp

127019955
VG95211-ML-127019955: RNCC: 2 | RNVC: 2
155N464-636: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-381-2936
Mending Plate

123812936
424-12-SK1: RNCC: 3 | RNVC: 2
4250473101087: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-393-8727
Mounting Bracket

123938727
11.44043-0209: RNCC: 3 | RNVC: 2
11.44043-0209: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-12-305-5824
Mounting Bracket

123055824
5802017-707400.01: RNCC: 2 | RNVC: 2
5802017-707400.01: RNCC: 3 | RNVC: 2

25 Nov 1985

5340-12-702-4786
Mounting Bracket

127024786
VG95211-ML-127024786: RNCC: 2 | RNVC: 2
5.51.0605.0520.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-4972
Retaining Strap

127024972
VG95211-ML-127024972: RNCC: 2 | RNVC: 2
5.51.5105.0040.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-332-8645
Webbing Strap

123328645
702-145320-000-0: RNCC: 3 | RNVC: 2

28 Sep 1993

5340-12-383-9617
Bail Handle

123839617
S80043-00: RNCC: 3 | RNVC: 2

29 Dec 2010

5340-12-136-3911
Loop Clamp

121363911
DIN71555-35,2-PHOSPHATIERT: RNCC: 2 | RNVC: 2
35,2/71555PH: RNCC: 3 | RNVC: 2
DIN71555-35,2-PHOSPHATIERT: RNCC: 3 | RNVC: 2
DIN71555-35-2PHOSPHATIERT: RNCC: 5 | RNVC: 2
35-2DIN71555PHRE: RNCC: 5 | RNVC: 2
DIN71555-35-2PH0SPHATIERT: RNCC: 5 | RNVC: 2
DIN71555-35-2PHOSPHATIERT: RNCC: 5 | RNVC: 2
35-2DIN71555PH0SPHATIERT: RNCC: 5 | RNVC: 2
5500200035: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-702-1697
Mounting Bracket

127021697
VG95211-ML-127021697: RNCC: 2 | RNVC: 2
30.7109.111: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-358-7910
Angle Bracket

123587910
S.3015.231: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-180-3152
Support Hook

121803152
02589897: RNCC: 3 | RNVC: 2
2589897EZ5505-46: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-044-4390

5340-12-383-3376
Tripod Component

123833376
388391: RNCC: 3 | RNVC: 2

7 Oct 2010

5340-12-182-3051
Platte

121823051
5499241: RNCC: 3 | RNVC: 2

25 Jan 1980

5340-12-177-1699
Resilient Mount

121771699
6010: RNCC: 3 | RNVC: 9

17 Jan 1979

5340-12-189-1718
Helical Compression Spring Seat

121891718
4138302023: RNCC: 2 | RNVC: 2
4138 302 023: RNCC: 3 | RNVC: 2
4138302023: RNCC: 5 | RNVC: 2
4138302023: RNCC: 5 | RNVC: 9
4138302023: RNCC: 5 | RNVC: 9

8 Sep 1981

5340-12-180-0975
Butt Hinge

121800975
LN9172KHH: RNCC: 2 | RNVC: 2
LN9172HH: RNCC: 5 | RNVC: 2

20 Aug 1979

5340-12-190-1270

5340-12-020-5153

5340-12-306-2487
Dust And Moisture Seal Protective Cap

123062487
R3857: RNCC: 3 | RNVC: 2
0004213587: RNCC: 5 | RNVC: 2

11 Feb 1986

5340-12-311-8443
Metal Runner

123118443
5801313-905.03: RNCC: 2 | RNVC: 2
5801313-905.03: RNCC: 3 | RNVC: 2

22 Oct 1987

5340-12-300-8052
Hand Crank

123008052
0803502003: RNCC: 3 | RNVC: 2
4354030045: RNCC: 5 | RNVC: 2
4354030145: RNCC: 5 | RNVC: 2

31 Aug 1984

5340-12-303-8461
Rod End Clevis

123038461
266667: RNCC: 3 | RNVC: 2

7 May 1985

5340-12-384-0202
Mending Plate

123840202
DIN3015-Z DP-2-W3: RNCC: 2 | RNVC: 2
GD2DW3: RNCC: 3 | RNVC: 2
92357-42083: RNCC: 5 | RNVC: 2
DIN3015-Z-DP-1-W3: RNCC: 5 | RNVC: 9
5340PL0968947: RNCC: 6 | RNVC: 9

12 Jan 2011

5340-12-351-2295
Lock-Release Lever

123512295
2812-022420.000.0: RNCC: 2 | RNVC: 2
2812-022420.000.0: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-341-3399
Loop Clamp

123413399
DIN3015-L-KP-2-R-12-PP: RNCC: 2 | RNVC: 2
RAPR-212: RNCC: 3 | RNVC: 2
212PP: RNCC: 3 | RNVC: 2
RAPR-212: RNCC: 5 | RNVC: 2

27 Aug 1996

5340-12-326-5647
Handle Grip

123265647
2300232-189092.000.0: RNCC: 2 | RNVC: 2
1594118: RNCC: 3 | RNVC: 2
2300232-189092.000.0: RNCC: 5 | RNVC: 2

8 Oct 1991

5340-12-701-1901
Mounting Bracket

127011901
VG95211-ML-127011901: RNCC: 2 | RNVC: 2
5.12.0430.4160.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-4200
Mounting Plate

127024200
VG95211-ML-127024200: RNCC: 2 | RNVC: 2
5.12.7070.1300.09: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-173-4569
Retaining Strap

121734569
LN29836B2-50: RNCC: 2 | RNVC: 2
LN29836-2-50: RNCC: 5 | RNVC: 2
LN29836-B2-50: RNCC: 5 | RNVC: 2

18 Apr 1978

5340-12-701-2131
Mounting Plate

127012131
VG95211-ML-127012131: RNCC: 2 | RNVC: 2
5.12.0605.0213.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-344-4271
Angle Bracket

123444271
P-297201-011: RNCC: 3 | RNVC: 2
P297201-011: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-320-1530
Dust And Moisture Seal Protective Cap-Plug

123201530
TL-2-226: RNCC: 3 | RNVC: 2
20076: RNCC: 3 | RNVC: 2
TL-2-226: RNCC: 5 | RNVC: 2

13 Dec 1989

5340-12-332-0652
Angle Bracket

123320652
702-941100-902-0: RNCC: 2 | RNVC: 2
702-941100-902-0: RNCC: 3 | RNVC: 2

20 Jul 1993

5340-12-191-2505
Strap Bolt

121912505
2500058-130210.05: RNCC: 2 | RNVC: 2
2500058-130210.05: RNCC: 3 | RNVC: 2
2500058-130210.05: RNCC: 3 | RNVC: 2
2500058-130210.05: RNCC: 5 | RNVC: 2
2500058-130210.05: RNCC: 5 | RNVC: 9
2500058-130210.05: RNCC: 5 | RNVC: 9

20 Jan 1982

5340-12-358-0400
Mending Plate

123580400
S33816-01-6-251: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-12-177-7693
Angle Bracket

121777693
6-226-0-982-024-4: RNCC: 3 | RNVC: 9

19 Feb 1979

5340-12-368-6923
Loop Clamp

123686923
DIN3016-1-D1-13X15-W1-2-EPDM: RNCC: 3 | RNVC: 2

6 Apr 2006

5340-12-359-4350
Loop Clamp

123594350
DIN3016-1-D1-4X12-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-377-7176
Spring Loaded Cylinder Fastener

123777176
GN 617.1-6-AK: RNCC: 3 | RNVC: 2

5 Feb 2009

5340-12-368-9282
Angle Bracket

123689282
0080154: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-347-8816
Nonmetallic Bumper

123478816
54.1094.240.07: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-12-374-9060
Retaining Strap

123749060
353 6862-801: RNCC: 3 | RNVC: 2
353 6862-801: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-12-300-7855
Handwheel

123007855
0021-3113-640: RNCC: 3 | RNVC: 2
0021-3113-640: RNCC: 5 | RNVC: 9

30 Aug 1984

5340-12-300-6740
Angle Bracket

123006740
4354922741: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-356-3807
Loop Clamp

123563807
167.060.008: RNCC: 3 | RNVC: 2
167 060 008: RNCC: 5 | RNVC: 2

20 Feb 2002

5340-12-358-8902
Double Angle Bracket

123588902
3521801140: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-180-2142
Angle Bracket

121802142
42035522: RNCC: 3 | RNVC: 2
42035522EE5035-71: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-194-1110
Loop Clamp

121941110
2500136-9006.00: RNCC: 2 | RNVC: 2
2500136-9006.00: RNCC: 3 | RNVC: 2
2500136-9006.00: RNCC: 5 | RNVC: 2
2500136-9006.00: RNCC: 5 | RNVC: 9

4 Oct 1982

5340-12-140-6143

5340-12-375-1549
Angle Bracket

123751549
SZ 696 432: RNCC: 3 | RNVC: 2

28 Apr 2008

5340-12-355-5763
Webbing Strap

123555763
17.108.3717.03: RNCC: 2 | RNVC: 2
17.108.3717.03: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-12-357-8999
Handle Grip

123578999
12015802: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-372-4168
Rigid Caster

123724168
596132: RNCC: 3 | RNVC: 2

16 Jul 2007

5340-12-130-8629

5340-12-306-0781
Access Cover

123060781
P-243931-009: RNCC: 3 | RNVC: 2
P243931-009: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-317-8447
Angle Bracket

123178447
P-296883-313: RNCC: 3 | RNVC: 2
P296883-313: RNCC: 5 | RNVC: 2

19 May 1989

5340-12-323-5078
Loop Clamp

123235078
DIN3015-LB-K-0R-12-PP-W1: RNCC: 2 | RNVC: 2
HRL0B12PP STMBL: RNCC: 3 | RNVC: 2
SP112PP-IS: RNCC: 3 | RNVC: 2
RAPR2-012: RNCC: 3 | RNVC: 2
SP112PP-IS: RNCC: 5 | RNVC: 2
SP112PPIS: RNCC: 5 | RNVC: 2
0815130: RNCC: 5 | RNVC: 2
0815130: RNCC: 5 | RNVC: 2
RAPR2-012: RNCC: 5 | RNVC: 2
DIN3015-LB0R-12PP-W1-K: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-320-0906
Angle Bracket

123200906
2300264-066500.00.0: RNCC: 2 | RNVC: 2
2300264-066500.00.0: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-12-332-9890
Escutcheon Plate

123329890
5900046-2400.05: RNCC: 2 | RNVC: 2
5900046-2400-05: RNCC: 5 | RNVC: 2

19 Oct 1993

5340-12-171-4799
Support Hook

121714799
23230-062144.003.0: RNCC: 2 | RNVC: 2
81418600035: RNCC: 5 | RNVC: 2
81.41860-0035: RNCC: 5 | RNVC: 2
23230-062144-003-0: RNCC: 5 | RNVC: 9
23230-062144.003.0: RNCC: 5 | RNVC: 9

17 Oct 1977

5340-12-314-0832
Mending Plate

123140832
026-740206.300.0: RNCC: 3 | RNVC: 2
026-740206.300.0: RNCC: 5 | RNVC: 9
6900077-026-740206.300.0: RNCC: 5 | RNVC: 9
6900077-026-740206.300.0: RNCC: 5 | RNVC: 9

4 Jun 1988

5340-12-703-3109
Rod End Connector

127033109
VG95211-ML-127033109: RNCC: 2 | RNVC: 2
5.12.4806.5101.00: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-306-5648
Angle Bracket

123065648
A-296710-155: RNCC: 3 | RNVC: 2
A296710-155: RNCC: 5 | RNVC: 2

11 Mar 1986

5340-12-355-5442
Mechanical Stop

123555442
3011R-207000.02: RNCC: 3 | RNVC: 2
3011R207000.02: RNCC: 5 | RNVC: 9

22 Nov 2001

5340-12-359-8477
Dust And Moisture Seal Protective Cap-Plug

123598477
600B555RAL3000: RNCC: 3 | RNVC: 2
GPN600B555RAL3000: RNCC: 5 | RNVC: 2
600B555ROT: RNCC: 5 | RNVC: 9
GPN600-B555RAL3000: RNCC: 5 | RNVC: 9

13 Mar 2003

5340-12-316-7318
Friction Catch Stud Receptacle

123167318
51-00493: RNCC: 3 | RNVC: 2

8 Feb 1989

5340-12-188-3373
Extension Drawer Slide

121883373
409042857: RNCC: 3 | RNVC: 2
38 702-033: RNCC: 5 | RNVC: 2
38702-033: RNCC: 5 | RNVC: 2
409-042857: RNCC: 5 | RNVC: 2

1 Jul 1981

5340-12-701-9541
Rod End Clevis

127019541
VG95211-ML-127019541: RNCC: 2 | RNVC: 2
5.12.6401.0090.03: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-701-3391
Mounting Bracket

127013391
VG95211-ML-127013391: RNCC: 2 | RNVC: 2
5.12.5111.1040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-9960
Webbing Strap

121969960
01151-1-GLATT-FE1900MM: RNCC: 3 | RNVC: 2
79057-1900: RNCC: 3 | RNVC: 2
4900059-112033.000.0: RNCC: 3 | RNVC: 2
4900059-112033-000-0: RNCC: 5 | RNVC: 2
DIN60060-1-25X1900-C3: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-303-8871
Lock-Release Lever

123038871
06430-4102X80: RNCC: 3 | RNVC: 2
0141008002: RNCC: 3 | RNVC: 2
NLM643.1410X80 ORANGE: RNCC: 5 | RNVC: 9
NLM643-4102X80: RNCC: 5 | RNVC: 9
NLM6430-4102X80: RNCC: 5 | RNVC: 9

14 May 1985

5340-12-328-9888
Loop Clamp

123289888
DIN3015-LD-2R-18-PA6-W1: RNCC: 2 | RNVC: 2
SM218PA-DP-AS: RNCC: 3 | RNVC: 2
RANR12-218: RNCC: 3 | RNVC: 2
RANR12-218: RNCC: 5 | RNVC: 2
DIN3015-LD-2R-18-PA-W1: RNCC: 5 | RNVC: 2
VG95932B2-18-PA-W1: RNCC: 5 | RNVC: 9

7 Jul 1992

5340-12-387-9697
Angle Bracket

123879697
5803688-100000.03: RNCC: 2 | RNVC: 2
5803688-100000.03: RNCC: 3 | RNVC: 2

13 Feb 2012

5340-12-386-3482
Spring Loaded Cylinder Fastener

123863482
E1-5999-0400: RNCC: 3 | RNVC: 2
8421/02206: RNCC: 5 | RNVC: 2

25 Aug 2011

5340-12-380-9562
Spring Tension Clip

123809562
151-00701: RNCC: 3 | RNVC: 2
41118373 TEIL 41118375: RNCC: 5 | RNVC: 2
41118375: RNCC: 5 | RNVC: 2

16 Dec 2009

5340-12-354-8767
Mechanical Stop

123548767
5400049-117810.03: RNCC: 3 | RNVC: 2

31 Aug 2001

5340-12-124-3267
Expansion Plug

121243267
DIN443-10-ST-PHR: RNCC: 2 | RNVC: 2
10DIN443PHR: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-375-8555
Helical Compression Spring Seat

123758555
AFG075742-01: RNCC: 2 | RNVC: 2
AFG075742-01: RNCC: 3 | RNVC: 2

14 Jul 2008

5340-12-702-9383
Dust And Moisture Seal Protective Cap

127029383
VG95211-ML-127029383: RNCC: 2 | RNVC: 2
062.09.1030: RNCC: 3 | RNVC: 2
0501030074299: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-364-2502
Turnbuckle Body

123642502
DIN1479-SP-M12-ST-A2P: RNCC: 2 | RNVC: 2
001479012001: RNCC: 5 | RNVC: 2

3 Sep 2004

5340-12-365-3042
Access Cover

123653042
305206-01: RNCC: 3 | RNVC: 2

17 Dec 2004

5340-12-701-5237
Retaining Strap

127015237
VG95211-ML-127015237: RNCC: 2 | RNVC: 2
5.12.6101.0020.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-181-7418
Dust And Moisture Seal Protective Plug

121817418
HK125CK11-111: RNCC: 3 | RNVC: 2
0287 7168: RNCC: 5 | RNVC: 2
2877168: RNCC: 5 | RNVC: 2
2877168EZ8928-63: RNCC: 5 | RNVC: 2
12,5ATE N14471: RNCC: 5 | RNVC: 2
41.4901-0125.0: RNCC: 5 | RNVC: 2

14 Dec 1979

5340-12-361-8780
Dust And Moisture Seal Protective Plug

123618780
779021408: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-12-392-7832
Spring Tension Clip

123927832
QA18491: RNCC: 3 | RNVC: 2

10 Jul 2013

5340-12-384-2755
Manual Control Lever

123842755
30571: RNCC: 3 | RNVC: 2

9 Feb 2011

5340-12-094-2411

5340-12-044-4702

5340-12-094-2047

5340-12-702-5687
Mounting Bracket

127025687
VG95211-ML-127025687: RNCC: 2 | RNVC: 2
5.51.7701.0510.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-3383
Mounting Bracket

127013383
VG95211-ML-127013383: RNCC: 2 | RNVC: 2
5.12.5111.0980.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-306-7309
Lock-Release Lever

123067309
28.06.206-021: RNCC: 3 | RNVC: 2
286-206-021-000: RNCC: 5 | RNVC: 2

25 Mar 1986

5340-12-394-3744
Mechanic Equipment Hardware Kit

123943744
Y2300608-182098.000.0: RNCC: 2 | RNVC: 2
Y2300608-182098.000.0: RNCC: 3 | RNVC: 2

26 Nov 2013

5340-12-160-2164
Retaining Band

121602164
1918-121520-008: RNCC: 3 | RNVC: 2
1918-121520-008: RNCC: 5 | RNVC: 9
1918-121520.008: RNCC: 5 | RNVC: 9

6 Apr 1976

5340-12-195-0473
Webbing Strap

121950473
100332-58210.00: RNCC: 2 | RNVC: 2
100332-58210.00: RNCC: 3 | RNVC: 2
100332-58210-00: RNCC: 5 | RNVC: 2
111945: RNCC: 5 | RNVC: 9

6 Jan 1983

5340-12-142-7657
Resilient Mount

121427657
DIN95361-70X50-CR45ST: RNCC: 2 | RNVC: 2
TS464/601/1360-BSMQ4590: RNCC: 5 | RNVC: 2
800026-10MM-CR45.ST: RNCC: 5 | RNVC: 2
TS464-601-1360: RNCC: 5 | RNVC: 2
TS464/601/1360: RNCC: 5 | RNVC: 9
VG95361-70X50X10-CR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-3938
Swivel Caster

121973938
441I17K125EZPK: RNCC: 3 | RNVC: 2
441-14-RO/125: RNCC: 5 | RNVC: 2
441-14-RO-125: RNCC: 5 | RNVC: 2
441-14RO125: RNCC: 5 | RNVC: 2
441A14R125EZPK: RNCC: 5 | RNVC: 2

19 Oct 1983

5340-12-701-4088
Loop Clamp

127014088
VG95211-ML-127014088: RNCC: 2 | RNVC: 2
5.12.5311.8320.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-372-3558
Spring Tension Clip

123723558
03.9305-1030.0/02: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-12-171-9189
Webbing Strap

121719189
81968025010: RNCC: 3 | RNVC: 2
2806852UD7103-17: RNCC: 5 | RNVC: 2
23230-175033.000.0: RNCC: 5 | RNVC: 2
983 042-257: RNCC: 5 | RNVC: 2
02806852: RNCC: 5 | RNVC: 2
23230-175033-000-0: RNCC: 5 | RNVC: 9
23230-175033.000.0: RNCC: 5 | RNVC: 9

29 Nov 1977

5340-12-702-4738
Rod End Connector

127024738
VG95211-ML-127024738: RNCC: 2 | RNVC: 2
5.51.0605.0040.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-314-6108
Swivel Caster

123146108
2470DHK100P60: RNCC: 3 | RNVC: 2

22 Jul 1988

5340-12-361-4912
Nonmetallic Bumper

123614912
1448160: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-360-0061
Mounting Bracket

123600061
9415403473: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-309-6366
Catch Strike

123096366
23114-4310.09: RNCC: 2 | RNVC: 2
23114-4310.09: RNCC: 3 | RNVC: 2
23114-4310.09: RNCC: 5 | RNVC: 9

11 Feb 1987

5340-12-381-0287
Mounting Bracket

123810287
9999075-161124.006.0: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-12-355-5801
Double Angle Bracket

123555801
2125-025260.04B: RNCC: 2 | RNVC: 2
2125-025260.04B: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-12-322-4605
Angle Bracket

123224605
2300013-7132.00: RNCC: 2 | RNVC: 2
2300013-7132.00: RNCC: 3 | RNVC: 2
2300013-7132.00: RNCC: 5 | RNVC: 9

23 Aug 1990

5340-12-174-0927
Nonmetallic Bumper

121740927
81626410004: RNCC: 3 | RNVC: 2

6 Jun 1978

5340-12-332-8257
Retaining Strap

123328257
81669225009: RNCC: 2 | RNVC: 2
81669225009: RNCC: 3 | RNVC: 2
81.66922.5009: RNCC: 5 | RNVC: 2

23 Sep 1993

5340-12-375-1352
Angle Bracket

123751352
L792M3013208: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-701-4560
Loop Clamp

127014560
VG95211-ML-127014560: RNCC: 2 | RNVC: 2
5.12.5314.1008.99: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-303-2500
Nut And Bolt Locking Plate

123032500
8345743-05: RNCC: 3 | RNVC: 2
8 345 743-05: RNCC: 5 | RNVC: 2
8 345 743-05: RNCC: 5 | RNVC: 2
8 345 743 ITEM 05: RNCC: 5 | RNVC: 2

8 Mar 1985

5340-12-152-4560
Retaining Strap

121524560
115-02712-4: RNCC: 3 | RNVC: 9
1092105-0100.020: RNCC: 5 | RNVC: 9
1092105-0100-020: RNCC: 5 | RNVC: 9
1092105-0100-020: RNCC: 5 | RNVC: 9
4-7822-706: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-7945
Lock-Release Lever

123187945
GN212.3-33-M12-E: RNCC: 3 | RNVC: 2
RBN944-G32XM12X80BRUENIERT: RNCC: 3 | RNVC: 2
0631208020: RNCC: 3 | RNVC: 2

17 Aug 1989

5340-12-166-3892
Ball Socket Seat

121663892
2360-134000.06.0: RNCC: 2 | RNVC: 2
2360-134000.06.0: RNCC: 3 | RNVC: 2
35E1340-06-000: RNCC: 5 | RNVC: 2
2360-134000-06-0: RNCC: 5 | RNVC: 2
2360-134000.06.0: RNCC: 5 | RNVC: 2
2360-134000-06-0: RNCC: 5 | RNVC: 9
2360-134000.06.0: RNCC: 5 | RNVC: 9

3 Sep 1976

5340-12-374-7496
Loop Clamp

123747496
DIN3016-D2-5-7X15-W1-2: RNCC: 2 | RNVC: 2

13 Mar 2008

5340-12-174-2923
Retaining Strap

121742923
23223-060000-04-0: RNCC: 2 | RNVC: 2
23223-060000-04-0: RNCC: 5 | RNVC: 2
23223-060000.04.0: RNCC: 5 | RNVC: 2
23223-060000.04.0: RNCC: 5 | RNVC: 9

21 Jun 1978

5340-12-330-9464
Angle Bracket

123309464
2718-000050.000.0: RNCC: 2 | RNVC: 2
2718-000050.000.0: RNCC: 3 | RNVC: 2

2 Mar 1993

5340-12-188-8686
Bridge Clamp

121888686
SP05286: RNCC: 3 | RNVC: 2
20-4-012-6001: RNCC: 5 | RNVC: 9
20.4.012.6001: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-12-162-8472
Dust And Moisture Seal Protective Plug

121628472
5659-4: RNCC: 3 | RNVC: 2
1918-121700-058: RNCC: 5 | RNVC: 2
5659-4: RNCC: 5 | RNVC: 9
1918-121700-058: RNCC: 5 | RNVC: 9
1918-121700.058: RNCC: 5 | RNVC: 9
5659-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-162-4107
Loop Clamp

121624107
81974206002: RNCC: 3 | RNVC: 2
81.97420-6002: RNCC: 5 | RNVC: 2
02808637: RNCC: 5 | RNVC: 2
02808638: RNCC: 5 | RNVC: 2
2808637UD7103-04: RNCC: 5 | RNVC: 2
2808638KZ7103-04: RNCC: 5 | RNVC: 2
23230-040015-000-0: RNCC: 5 | RNVC: 9
23230-040015.000.0: RNCC: 5 | RNVC: 9
02808637: RNCC: 5 | RNVC: 9
02808638: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-334-2735
Resilient Mount

123342735
DIN95369-A1-1-M-ST: RNCC: 2 | RNVC: 2
1340102010: RNCC: 3 | RNVC: 2
151001-M6-HD.ST-40: RNCC: 5 | RNVC: 2
60-100-040-HD: RNCC: 5 | RNVC: 2
G0015318: RNCC: 5 | RNVC: 2
C1010 HDS: RNCC: 5 | RNVC: 9
VG95369-A1-1-MVQ-H-ST: RNCC: 5 | RNVC: 9
C1010 HDS: RNCC: 5 | RNVC: 9
C1010HDS: RNCC: 5 | RNVC: 9
C1010HDS-M6: RNCC: 5 | RNVC: 9

20 Apr 1994

5340-12-187-4611
Retaining Strap

121874611
2300109-060000.016.0: RNCC: 2 | RNVC: 2
2300109-060000.016.0: RNCC: 3 | RNVC: 2
2300109-060000.016.0: RNCC: 3 | RNVC: 2
2300109-060000.016.0: RNCC: 5 | RNVC: 9
2300109-060000-016-0: RNCC: 5 | RNVC: 9
2300109-060000-016-0: RNCC: 5 | RNVC: 9
2300109-060000-016-0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-329-9612
Access Cover

123299612
2500229-190000.007.0: RNCC: 2 | RNVC: 2
2500229-190000.007.0: RNCC: 3 | RNVC: 2

16 Oct 1992

5340-12-354-5080
Access Cover

123545080
4.038-365.0: RNCC: 3 | RNVC: 2

23 Jul 2001

5340-12-182-2739
Bow Handle

121822739
VG95149A107X20ST-ZN-LQ-RAL1013: RNCC: 2 | RNVC: 2
1200037-2-001: RNCC: 3 | RNVC: 2
1200037-2.001: RNCC: 5 | RNVC: 2
1200037-2-001: RNCC: 5 | RNVC: 9

23 Jan 1980

5340-12-314-1034
Angle Bracket

123141034
A10-31-906-01-1: RNCC: 3 | RNVC: 2
85-693-6905: RNCC: 6 | RNVC: 9

7 Jun 1988

5340-12-358-0703
Butt Hinge

123580703
2500262-191120.000.0: RNCC: 2 | RNVC: 2
2500262-191120.000.0: RNCC: 3 | RNVC: 2

10 Sep 2002

5340-12-701-5915
Mounting Plate

127015915
VG95211-ML-127015915: RNCC: 2 | RNVC: 2
5.12.6501.0850.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-349-7660
Helical Compression Spring Retainer

123497660
2500238-050314.002.0: RNCC: 2 | RNVC: 2
2500238-050314.002.0: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-12-191-2521
Angle Bracket

121912521
2500058-130100.17: RNCC: 2 | RNVC: 2
2500058-130100.17: RNCC: 3 | RNVC: 2
2500058-130100.17: RNCC: 3 | RNVC: 2
2500058-130100.17: RNCC: 5 | RNVC: 2
2500058-130100.17: RNCC: 5 | RNVC: 9
2500058-130100.17: RNCC: 5 | RNVC: 9

20 Jan 1982

5340-12-324-3782
Mounting Bracket

123243782
160-25533-57: RNCC: 3 | RNVC: 2
160-25533.57: RNCC: 5 | RNVC: 2
160-25533.57: RNCC: 5 | RNVC: 9

8 Feb 1991

5340-12-338-3854
Access Door

123383854
2500179-350221.000.0: RNCC: 2 | RNVC: 2
2500179-350221.000.0: RNCC: 3 | RNVC: 2

30 Jun 1995

5340-12-388-1904
Section Block Clamp

123881904
1030124-827000.002.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-351-4986
Loop Clamp

123514986
6021540045: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-351-5097
Clamping Catch

123515097
0008901889: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-381-1055
Spring Tension Clip

123811055
0008350991: RNCC: 3 | RNVC: 2

12 Jan 2010

5340-12-091-4888

5340-12-353-7170
Dust And Moisture Seal Protective Plug

123537170
T433M1001210: RNCC: 3 | RNVC: 2

2 May 2001

5340-12-315-2065
Protection Bellows

123152065
MULI2: RNCC: 3 | RNVC: 2
212000FB: RNCC: 5 | RNVC: 2

30 Sep 1988

5340-12-387-6604
Loop Clamp

123876604
0117 6228: RNCC: 3 | RNVC: 2

20 Jan 2012

5340-12-122-2154

5340-12-338-1465
Dust And Moisture Seal Protective Cap

123381465
030 035 01: RNCC: 3 | RNVC: 2

30 May 1995

5340-12-352-7122
Access Cover

123527122
64416338: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-094-2126

5340-12-350-1918
Mechanical Stop

123501918
066-40: RNCC: 3 | RNVC: 2

25 Feb 2000

5340-12-170-4302
Access Cover

121704302
1400003-14130-03: RNCC: 3 | RNVC: 2
1400003-14130-03: RNCC: 5 | RNVC: 9
1400003-14130.03: RNCC: 5 | RNVC: 9

14 Jul 1977

5340-12-340-1984
Mounting Bracket

123401984
81423590013: RNCC: 3 | RNVC: 2
219516-4000: RNCC: 5 | RNVC: 2
2195164000: RNCC: 5 | RNVC: 2

13 Mar 1996

5340-12-170-0200
Access Cover

121700200
7358 040 169: RNCC: 3 | RNVC: 2
88916050001: RNCC: 5 | RNVC: 2
88.91605-0001: RNCC: 5 | RNVC: 9
7358040169: RNCC: 5 | RNVC: 9
7358040169: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-12-372-4822
Webbing Strap

123724822
D4075832: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-12-179-5399
Butt Hinge Leaf

121795399
183823305C: RNCC: 3 | RNVC: 2
B183823305A: RNCC: 5 | RNVC: 2
B183823305C: RNCC: 5 | RNVC: 2
183823305A: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-161-9882
Spring Tension Clip

121619882
49 0163 78: RNCC: 3 | RNVC: 2
49016378: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-9668
Loop Clamp

123659668
36568143: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-12-314-0850
Mending Plate

123140850
43712656-601: RNCC: 2 | RNVC: 2
43712656-601: RNCC: 3 | RNVC: 2

4 Jun 1988

5340-12-346-9474
Dust And Moisture Seal Protective Cap

123469474
6807549: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-12-320-4547
Retaining Strap

123204547
6000006: RNCC: 3 | RNVC: 2
731.06.047: RNCC: 5 | RNVC: 2
V731.06.047: RNCC: 5 | RNVC: 2

17 Jan 1990

5340-12-127-1277
Retaining Strap

121271277
4049950332: RNCC: 3 | RNVC: 2
222010112100: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-311-2081
Shimmy Damper

123112081
27 0318 287: RNCC: 2 | RNVC: 2
9850237: RNCC: 3 | RNVC: 9

5 Aug 1987

5340-12-360-6677
Mechanical Stop

123606677
1864460957: RNCC: 3 | RNVC: 2
1864460957: RNCC: 5 | RNVC: 2

25 Jun 2003

5340-12-363-5095
Retaining Strap

123635095
4374920440: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-350-2212
Nonmetallic Bumper

123502212
10063-110100.03: RNCC: 3 | RNVC: 2
10063-110100.03: RNCC: 5 | RNVC: 9

29 Feb 2000

5340-12-145-3870

5340-12-158-1317
Case Corner

121581317
105-071-106-1: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-390-3817
Webbing Strap

123903817
4100036-330324.000.0: RNCC: 2 | RNVC: 2
4100036-330324.000.0: RNCC: 3 | RNVC: 2

7 Nov 2012

5340-12-188-4083
Dust And Moisture Seal Protective Cap

121884083
250/54: RNCC: 3 | RNVC: 2
GPN250/54: RNCC: 5 | RNVC: 2
272-30296-1: RNCC: 5 | RNVC: 2
272.767533: RNCC: 5 | RNVC: 2
273.767533: RNCC: 5 | RNVC: 2
GPN250-54: RNCC: 5 | RNVC: 2
54GPN250: RNCC: 5 | RNVC: 9
250054000: RNCC: 5 | RNVC: 9

7 Jul 1981

5340-12-319-8981
Mending Plate

123198981
852-100001.03.0: RNCC: 2 | RNVC: 2
852-100001.03.0: RNCC: 3 | RNVC: 2
852-100001.03.0: RNCC: 5 | RNVC: 9

15 Nov 1989

5340-12-359-8274
Butt Hinge

123598274
0260.005.00.0: RNCC: 3 | RNVC: 2
05939137: RNCC: 5 | RNVC: 2

12 Mar 2003

5340-12-392-3252
Clamp Bracket

123923252
4100095-982215.000.0: RNCC: 2 | RNVC: 2
4100095-982215.000.0: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-389-1739
Loop Clamp

123891739
B.AKA1.3331.12: RNCC: 2 | RNVC: 2
B.AKA1.3331.12: RNCC: 3 | RNVC: 2

31 May 2012

5340-12-368-5182
Extension Drawer Slide

123685182
423.46.741: RNCC: 3 | RNVC: 2
423.46.441: RNCC: 5 | RNVC: 9

21 Mar 2006

5340-12-701-7881
Retaining Band

127017881
5.12.7805.1090.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-179-5900
Angle Bracket

121795900
4355220840: RNCC: 3 | RNVC: 2

11 Jul 1979

5340-12-351-5937
Butt Hinge

123515937
7802495100: RNCC: 3 | RNVC: 2
78024 95100: RNCC: 5 | RNVC: 9

7 Aug 2000

5340-12-163-5660
Loop Clamp

121635660
LN9490BM8: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-377-6889
Webbing Strap

123776889
4100039-981166.000: RNCC: 2 | RNVC: 2
4100039-981166.000: RNCC: 3 | RNVC: 2

3 Feb 2009

5340-12-315-3024
Angle Bracket

123153024
3874665040: RNCC: 3 | RNVC: 2
387 466 50 40: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-337-6437
Angle Bracket

123376437
10 0050 660: RNCC: 3 | RNVC: 2
100050660: RNCC: 5 | RNVC: 2

22 Mar 1995

5340-12-194-6403
Angle Bracket

121946403
5552597: RNCC: 3 | RNVC: 2
555.2597: RNCC: 5 | RNVC: 2

23 Nov 1982

5340-12-162-2201
An Scharnierlappen

5340-12-162-1836
An Scharnierlappen

5340-12-301-3742
Retaining Strap

123013742
2500001-270590.02.0: RNCC: 2 | RNVC: 2
2500001-270590.02.0: RNCC: 3 | RNVC: 2
2500001-270590.02.0: RNCC: 5 | RNVC: 9

10 Oct 1984

5340-12-379-8593
Rod End Clevis

123798593
DIN71752-G10X20: RNCC: 2 | RNVC: 2
100200100020: RNCC: 3 | RNVC: 2
0021370000: RNCC: 5 | RNVC: 2

8 Sep 2009

5340-12-355-4005
Retaining Strap

123554005
4619950310: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-317-6508
Helical Compression Spring Retainer

123176508
1000025-210000.34: RNCC: 3 | RNVC: 2

26 Apr 1989

5340-12-358-6539
Retaining Strap

123586539
6254920540: RNCC: 3 | RNVC: 2

31 Oct 2002

5340-12-389-0682
Loop Clamp

123890682
DIN3016-1-E1-75X25-W1-2-NBR: RNCC: 2 | RNVC: 2

23 May 2012

5340-12-303-5905
Catch Strike

123035905
704-125160-901-3: RNCC: 3 | RNVC: 2

11 Apr 1985

5340-12-321-8952
Metal Runner

123218952
7068-15100-012-2: RNCC: 3 | RNVC: 2

6 Jul 1990

5340-12-386-1470
Access Cover

123861470
2500261-183780.000.0: RNCC: 2 | RNVC: 2
2500261-183780.000.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-300-2608
Angle Bracket

123002608
5801411-41253: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-197-3566
Wood Runner

121973566
20-4120-030: RNCC: 3 | RNVC: 2

17 Oct 1983

5340-12-701-2504
Mounting Bracket

127012504
VG95211-ML-127012504: RNCC: 2 | RNVC: 2
5.12.3630.8020.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-194-5243
Lock-Release Lever

121945243
20-5140-248: RNCC: 3 | RNVC: 2

12 Nov 1982

5340-12-300-5770
Webbing Strap

123005770
79017/026-0600-0100: RNCC: 3 | RNVC: 2
79017/026-600-100: RNCC: 5 | RNVC: 2
220-00-075-3: RNCC: 5 | RNVC: 2

16 Aug 1984

5340-12-317-7587
Angle Bracket

123177587
P-296883-305: RNCC: 3 | RNVC: 2
P296883-305: RNCC: 5 | RNVC: 2

10 May 1989

5340-12-701-3764
Mounting Bracket

127013764
VG95211-ML-127013764: RNCC: 2 | RNVC: 2
5.12.5305.0385.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-365-1771
Mending Plate

123651771
1000192-00 0 00010.01: RNCC: 2 | RNVC: 2
1000192-00 0 00010.01: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-701-2729
Mounting Bracket

127012729
VG95211-ML-127012729: RNCC: 2 | RNVC: 2
5.12.4806.1570.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-703-2112
Retaining Strap

127032112
VG95211-ML-127032112: RNCC: 2 | RNVC: 2
5184A-53: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-305-0737
Metal Runner

123050737
409026595: RNCC: 3 | RNVC: 2
V2-VZ82 409.026 595: RNCC: 5 | RNVC: 2
409.026 595: RNCC: 5 | RNVC: 2
V2-VZ 82: RNCC: 5 | RNVC: 9

24 Sep 1985

5340-12-338-1742
Mending Plate

123381742
70926-760: RNCC: 3 | RNVC: 2
KB-70926-760: RNCC: 5 | RNVC: 9

31 May 1995

5340-12-320-8278
Access Cover

123208278
2654-330711.01: RNCC: 2 | RNVC: 2
2654-330711.01: RNCC: 3 | RNVC: 2
679-85010101.01: RNCC: 5 | RNVC: 9
679-85010101.01: RNCC: 5 | RNVC: 9
2654-330 711.01: RNCC: 5 | RNVC: 9

21 Feb 1990

5340-12-327-0645
Double Angle Bracket

123270645
5803702-108100.00: RNCC: 2 | RNVC: 2
7802180245: RNCC: 3 | RNVC: 2
78021 80245: RNCC: 5 | RNVC: 9

27 Nov 1991

5340-12-309-3000
Angle Bracket

123093000
0A846.91-10-21-02-004: RNCC: 3 | RNVC: 2

13 Jan 1987

5340-12-195-5420
Resilient Mount

121955420
251411041: RNCC: 3 | RNVC: 9

9 Mar 1983

5340-12-148-1263

5340-12-387-9757
Buckle

123879757
0626-338: RNCC: 3 | RNVC: 2

13 Feb 2012

5340-12-198-7663
Mending Plate

121987663
GE8143T644: RNCC: 3 | RNVC: 2
GE8143T644: RNCC: 5 | RNVC: 9

23 Feb 1984

5340-12-373-1685
Nonmetallic Bumper

123731685
2013280888: RNCC: 3 | RNVC: 2
201 328 08 88: RNCC: 5 | RNVC: 2

5 Oct 2007

5340-12-305-5639
Double Angle Bracket

123055639
379243: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-326-8157
Retaining Band

123268157
4080-902: RNCC: 3 | RNVC: 2

29 Oct 1991

5340-12-326-7995
Mending Plate

123267995
1512-9300.07: RNCC: 3 | RNVC: 2
1512-9300.07: RNCC: 5 | RNVC: 2

25 Oct 1991

5340-12-347-2121
Access Cover

123472121
54.1094.174.00: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-12-316-3994
Mounting Bracket

123163994
5186824: RNCC: 3 | RNVC: 2

16 Jan 1989

5340-12-310-3870
Angle Bracket

123103870
2300227-301000.001: RNCC: 2 | RNVC: 2
2300227-301000.001: RNCC: 3 | RNVC: 2

18 May 1987

5340-12-309-4079
Access Cover

123094079
WW 432 203: RNCC: 2 | RNVC: 2
WW 432 203: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-025-7960

5340-12-385-5141
Angle Bracket

123855141
5550780241: RNCC: 3 | RNVC: 2

10 Jun 2011

5340-12-124-4553
Loop Clamp

121244553
DIN71555-45,5-PHOSPHATIERT: RNCC: 2 | RNVC: 2
45,5/71555PH: RNCC: 3 | RNVC: 2
DIN71555-45,5-PHOSPHATIERT: RNCC: 3 | RNVC: 2
5500200045: RNCC: 5 | RNVC: 2
DIN71555-45-5PHOSPHATIERT: RNCC: 5 | RNVC: 2
DIN71555-45-5PH0SPHATIERT: RNCC: 5 | RNVC: 2
45-5DIN71555PHRE: RNCC: 5 | RNVC: 2
DIN71555-45-5PHOSPHATIERT: RNCC: 5 | RNVC: 2
45-5DIN71555PH0SPHATIERT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-185-2466
Mounting Bracket

121852466
NO PRIMARY REF 12-185-2466: RNCC: 3 | RNVC: 2
1-6899-06-3-6959-3: RNCC: 5 | RNVC: 9
06-3-6959-3: RNCC: 5 | RNVC: 9

23 Sep 1980

5340-12-358-1641
Retaining Strap

123581641
4055R-310400.071.0: RNCC: 2 | RNVC: 2
4055R-310400.071.0: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-12-389-0236
Runner

123890236
BANDEN10048-1,5X20X300SSTAHLEN1-: RNCC: 2 | RNVC: 2
NK1,5X20X300-1.4571-N.DIN-EN100-: RNCC: 3 | RNVC: 2

16 May 2012

5340-12-362-8027
Mounting Bracket

123628027
10020918: RNCC: 3 | RNVC: 2

2 Apr 2004

5340-12-326-5641
Mounting Plate

123265641
4209618080: RNCC: 3 | RNVC: 2

8 Oct 1991

5340-12-024-1297

5340-12-183-1028
Mending Plate

121831028
02537949: RNCC: 3 | RNVC: 2
2537949EE5048-75: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-315-7904
Electrical-Mechanical Equipment Post

123157904
7148001: RNCC: 3 | RNVC: 2

26 Nov 1988

5340-12-171-5249
Angle Bracket

121715249
22000607: RNCC: 3 | RNVC: 2

20 Oct 1977

5340-12-341-6349
Permanent Magnet

123416349
1158: RNCC: 3 | RNVC: 2
MAGNEET VIII: RNCC: 5 | RNVC: 2

8 Oct 1996

5340-12-319-9607
Dust And Moisture Seal Protective Plug

123199607
620U9B: RNCC: 3 | RNVC: 2
620U9B: RNCC: 5 | RNVC: 2
GPN620,U9B: RNCC: 5 | RNVC: 9

21 Nov 1989

5340-12-358-7659
Mounting Bracket

123587659
9412605562: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-150-7237

5340-12-177-2803
Nonmetallic Bumper

121772803
2300002-122400.008: RNCC: 2 | RNVC: 2
2300002-122400.008: RNCC: 3 | RNVC: 2
2300002-122400.008: RNCC: 5 | RNVC: 2
2300002-122400-008: RNCC: 5 | RNVC: 9
2300002-122400.008: RNCC: 5 | RNVC: 9

24 Jan 1979

5340-12-186-8003
Strap Bolt

121868003
2300109-031122.000.0: RNCC: 2 | RNVC: 2
2300109-031122.000.0: RNCC: 3 | RNVC: 2
2300109-031122.000.0: RNCC: 3 | RNVC: 2
2300109-031122.000.0: RNCC: 5 | RNVC: 9
2300109-031122-000-0: RNCC: 5 | RNVC: 9
2300109-031122-000-0: RNCC: 5 | RNVC: 9
2300109-031122-000-0: RNCC: 5 | RNVC: 9

6 Feb 1981

5340-12-177-7225
Mounting Plate

121777225
2300002-205110.007: RNCC: 2 | RNVC: 2
2300002-205110.007: RNCC: 3 | RNVC: 2
2300002-205110-007: RNCC: 5 | RNVC: 9
2300002-205110.007: RNCC: 5 | RNVC: 9

14 Feb 1979

5340-12-338-8544
Angle Bracket

123388544
463-223600.003: RNCC: 3 | RNVC: 9
9896276: RNCC: 5 | RNVC: 9

31 Aug 1995

5340-12-340-7752
Mounting Bracket

123407752
5801984-982820.000.0: RNCC: 2 | RNVC: 2
5801984-982820.000.0: RNCC: 3 | RNVC: 2

11 Jun 1996

5340-12-365-0199
Loop Clamp

123650199
EN4114F30WH1: RNCC: 2 | RNVC: 2

24 Nov 2004

5340-12-358-9619
Mounting Bracket

123589619
2300074-4146.06: RNCC: 2 | RNVC: 2
2300074-4146.06: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-356-2453
Hand Crank

123562453
3011R-302900: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-353-9490
Mounting Bracket

123539490
16001460: RNCC: 3 | RNVC: 2

21 May 2001

5340-12-319-1673
Electrical-Mechanical Equipment Post

123191673
54.0023.300.57: RNCC: 2 | RNVC: 2
54.0023.300.57: RNCC: 3 | RNVC: 2
VG95148B5XM2,5X40-NRST: RNCC: 5 | RNVC: 2

12 Sep 1989

5340-12-136-2233
Nonmetallic Bumper

121362233
81961012007: RNCC: 3 | RNVC: 2
81.96101-2007: RNCC: 5 | RNVC: 2
00.37051-6181: RNCC: 5 | RNVC: 9
00370516181: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-9097
Nonmetallic Bumper

123089097
1281-64610.07: RNCC: 2 | RNVC: 2
160186: RNCC: 3 | RNVC: 2
1281-64610.07: RNCC: 5 | RNVC: 2

27 Nov 1986

5340-12-345-9748
Access Cover

123459748
1651-104000.009.0: RNCC: 2 | RNVC: 2
1651-104000.009.0: RNCC: 3 | RNVC: 2

26 May 1998

5340-12-146-1930
Nonmetallic Bumper

121461930
23114-0401.11: RNCC: 2 | RNVC: 2
82200-23114-0401.11: RNCC: 3 | RNVC: 2
23114-0401-11: RNCC: 5 | RNVC: 2
23114-0401.11: RNCC: 5 | RNVC: 2
23114-0401-11: RNCC: 5 | RNVC: 9
23114-0401-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-0520
Manual Control Handle

121640520
589061: RNCC: 3 | RNVC: 2
1918-123148-003: RNCC: 5 | RNVC: 2
C 4150 284 LC: RNCC: 5 | RNVC: 2
3922-0009-589061: RNCC: 5 | RNVC: 2
A-9NAN2298: RNCC: 5 | RNVC: 9
1918-123148-003: RNCC: 5 | RNVC: 9
1918-123148.003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-333-2614
Rod End Clevis

123332614
26-21C1102G003P16: RNCC: 3 | RNVC: 2
26-21C1102G003-P16: RNCC: 5 | RNVC: 2

16 Nov 1993

5340-12-163-3214
Loop Clamp

121633214
SP8778.135/25SK: RNCC: 3 | RNVC: 2
1618778135: RNCC: 5 | RNVC: 2
SP778-135-25SK: RNCC: 5 | RNVC: 2
SP778.135/25SK: RNCC: 5 | RNVC: 2
40029400: RNCC: 5 | RNVC: 2
40029400-989: RNCC: 5 | RNVC: 9
40029400.989: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-1795
Angle Bracket

123211795
2500067-102400.11: RNCC: 2 | RNVC: 2
2500067-102400.11: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-12-348-9476
Mounting Bracket

123489476
245/7383-03-10-00: RNCC: 3 | RNVC: 2

6 Sep 1999

5340-12-199-5333
Webbing Strap

121995333
5801435-030930.00: RNCC: 2 | RNVC: 2
5801435-030930.00: RNCC: 3 | RNVC: 2
5801435-030930-00: RNCC: 5 | RNVC: 2
000-B2-25X2,5X400-BW-RAL6031: RNCC: 6 | RNVC: 9

9 May 1984

5340-12-172-6139
Catch Strike

121726139
601420: RNCC: 3 | RNVC: 2
4230-03-05-03-00: RNCC: 5 | RNVC: 9

31 Jan 1978

5340-12-318-2158
Electrical-Mechanical Equipment Post

123182158
54167-001: RNCC: 3 | RNVC: 2
54 167-001: RNCC: 5 | RNVC: 9

21 Jun 1989

5340-12-184-7563
Friction Catch

121847563
5800583-570000-212: RNCC: 3 | RNVC: 2
5800583-570000.212: RNCC: 5 | RNVC: 2

14 Aug 1980

5340-12-131-3784
Rod End Clevis

121313784
DIN71752-H10X20-CUZN39PB2F44: RNCC: 2 | RNVC: 2
DIN71752-H10X20-CUZN39PB2F44: RNCC: 3 | RNVC: 2
H10X20DIN71752-CUZN39PB2F44: RNCC: 3 | RNVC: 2
H10X20DIN71752-CUZN39PB2F44: RNCC: 5 | RNVC: 2
H10X20DIN71752-MS: RNCC: 5 | RNVC: 2
DIN71752-H10X20-CUZN39PB2F44: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-320-8085
Mounting Plate

123208085
2300232-206222.000.0: RNCC: 2 | RNVC: 2
2300232-206222.000.0: RNCC: 3 | RNVC: 2
9997023-206222.000.0: RNCC: 5 | RNVC: 2
2300232-206222.000.02: RNCC: 5 | RNVC: 9

19 Feb 1990

5340-12-328-7217
Lock-Release Lever

123287217
2350-010201.000.0: RNCC: 2 | RNVC: 2
2350-010201.000.0: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-12-195-1780
Resilient Mount

121951780
DIN95363-E30X25-NR55ST: RNCC: 2 | RNVC: 2
1.30.25.3B.55NR/ST: RNCC: 5 | RNVC: 2
81170-30X25-M8X20.NR55.ST: RNCC: 5 | RNVC: 2
BI5-40-25N: RNCC: 5 | RNVC: 9
BI5.40-25N: RNCC: 5 | RNVC: 9
VG95363-E30X25-NR55ST: RNCC: 5 | RNVC: 9

20 Jan 1983

5340-12-190-2871
Helical Compression Spring Seat

121902871
2500075-065174.002.0: RNCC: 2 | RNVC: 2
2500075-065174.002.0: RNCC: 3 | RNVC: 2
2500075-065174.002.0: RNCC: 5 | RNVC: 9
2500075-065174-002-0: RNCC: 5 | RNVC: 9

17 Nov 1981

5340-12-164-5750
Folding Stay

121645750
730024-62.6: RNCC: 2 | RNVC: 2
730024-62-6: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-1874
Mending Plate

123281874
P-086537-005: RNCC: 3 | RNVC: 2
P086537-005: RNCC: 5 | RNVC: 2

16 Apr 1992

5340-12-393-8299
Mounting Bracket

123938299
11.07343-0114: RNCC: 3 | RNVC: 2
11.07343-0114: RNCC: 5 | RNVC: 2

15 Oct 2013

5340-12-161-6847
Turnbuckle Body

121616847
100332-16000.44: RNCC: 2 | RNVC: 2
100332-16000.44: RNCC: 5 | RNVC: 2
100332-16000-44: RNCC: 5 | RNVC: 2
100332-16000-44: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-339-5863
Nonmetallic Bumper

123395863
81962100408: RNCC: 3 | RNVC: 2
SK-06673: RNCC: 5 | RNVC: 2
SK06673: RNCC: 5 | RNVC: 2
81.96210.0408: RNCC: 5 | RNVC: 2
81.96210.0408: RNCC: 5 | RNVC: 2

8 Dec 1995

5340-12-306-3653
Angle Bracket

123063653
47213-001: RNCC: 3 | RNVC: 2
47 213-001: RNCC: 5 | RNVC: 9

24 Feb 1986

5340-12-363-9067
Double Angle Bracket

123639067
J29120384-403: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-314-1176
Manual Control Handle

123141176
TS77-0018: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-12-174-2614
Angle Bracket

121742614
7882057: RNCC: 3 | RNVC: 2
7882-057: RNCC: 5 | RNVC: 2
1000025-591000-03: RNCC: 5 | RNVC: 9
1000025-591000.03: RNCC: 5 | RNVC: 9

19 Jun 1978

5340-12-167-3311
Nonmetallic Bumper

121673311
1400003-15001-03: RNCC: 3 | RNVC: 2
1400003-15001.03: RNCC: 5 | RNVC: 9
1400003-15001-03: RNCC: 5 | RNVC: 9

14 Dec 1976

5340-12-330-4128
Butt Hinge

123304128
3102-100MM-MN: RNCC: 3 | RNVC: 2
3102-100MM-MS: RNCC: 5 | RNVC: 2
3102-100-MS: RNCC: 5 | RNVC: 2
3102: RNCC: 5 | RNVC: 9

11 Dec 1992

5340-12-303-0316
Nonmetallic Bumper

123030316
6600117-150000.00: RNCC: 2 | RNVC: 2
6600117-150000.00: RNCC: 5 | RNVC: 9

21 Feb 1985

5340-12-331-6886
Mounting Bracket

123316886
480-7397-26-21-00: RNCC: 3 | RNVC: 2
480/7397-26-21-00: RNCC: 5 | RNVC: 2

8 Jun 1993

5340-12-300-6742
Angle Bracket

123006742
4354923341: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-300-7351
Catch Strike

123007351
3097430103: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-155-4767
Spring Tension Clip

121554767
160-73317: RNCC: 3 | RNVC: 2
160-73317: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-193-9264
Electrical-Mechanical Equipment Post

121939264
5545692: RNCC: 3 | RNVC: 2

14 Sep 1982

5340-12-300-4502
Angle Bracket

123004502
AM647-63-10: RNCC: 3 | RNVC: 2

2 Aug 1984

5340-12-378-1276
Angle Bracket

123781276
5400053-372510.01: RNCC: 2 | RNVC: 2
5400053-372510.01: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-12-178-1677
Spacing Threaded Standoff

121781677
VG95211-ML-121781677: RNCC: 2 | RNVC: 2
773-274-47: RNCC: 3 | RNVC: 2

23 Mar 1979

5340-12-343-8274
Manual Control Handle

123438274
3.1055-01: RNCC: 3 | RNVC: 2
1425322: RNCC: 5 | RNVC: 2

4 Aug 1997

5340-12-375-8519
Access Cover

123758519
2500075-191740.000.0: RNCC: 3 | RNVC: 2

11 Jul 2008

5340-12-337-3954
Access Door

123373954
463-630440.000: RNCC: 3 | RNVC: 2
463-630440.000: RNCC: 3 | RNVC: 9
9892221: RNCC: 5 | RNVC: 2
9892221: RNCC: 5 | RNVC: 9

24 Feb 1995

5340-12-394-5390
Fix Pressure Piece

123945390
4052063128777: RNCC: 3 | RNVC: 2
I012336: RNCC: 5 | RNVC: 2

11 Dec 2013

5340-12-302-1331
Kunst Gleitschiene

123021331
FS16L: RNCC: 3 | RNVC: 2

4 Dec 1984

5340-12-381-0881
Manual Control Handle

123810881
0009184960: RNCC: 3 | RNVC: 2

11 Jan 2010

5340-12-348-0339
Mounting Bracket

123480339
272.411 285: RNCC: 2 | RNVC: 2
272.411.285: RNCC: 3 | RNVC: 2
272.411 285: RNCC: 5 | RNVC: 9

30 Mar 1999

5340-12-347-9508
Angle Bracket

123479508
54.0058.510.02: RNCC: 2 | RNVC: 2
54.0058.510.02: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-12-198-7247
Clamping Catch

121987247
27 0322 031: RNCC: 2 | RNVC: 2
9837772: RNCC: 3 | RNVC: 2
27 0322 031: RNCC: 5 | RNVC: 9
9837772: RNCC: 5 | RNVC: 9
270322031: RNCC: 5 | RNVC: 9

22 Feb 1984

5340-12-306-5129
Rod End Connector

123065129
1865-020123.00.0: RNCC: 3 | RNVC: 9

6 Mar 1986

5340-12-370-6682
Rod End Connector

123706682
A65453-1000: RNCC: 3 | RNVC: 2

6 Dec 2006

5340-12-310-8463
Nonmetallic Bumper

123108463
1094451-0400.18: RNCC: 2 | RNVC: 2
1094451-0400.18.0: RNCC: 3 | RNVC: 2
1094451-0400.18: RNCC: 5 | RNVC: 2

2 Jul 1987

5340-12-331-6288
Mounting Bracket

123316288
480-9713-03-00-00-1-3: RNCC: 3 | RNVC: 2
480/9713-03-00-00/1-3: RNCC: 5 | RNVC: 2

2 Jun 1993

5340-12-313-6860
Resilient Mount

123136860
H95-216-137-186-8-FF: RNCC: 3 | RNVC: 2
DA 38-08 S2: RNCC: 3 | RNVC: 2
Z1479-08 CM2: RNCC: 5 | RNVC: 2
Z1479-08CM2: RNCC: 5 | RNVC: 2
057900016: RNCC: 5 | RNVC: 2
Z1479-08 CM2: RNCC: 5 | RNVC: 2
Z1479-08 CM2: RNCC: 5 | RNVC: 2
Z1479-08 CM2: RNCC: 5 | RNVC: 2

26 Apr 1988

5340-12-700-2995
Access Cover

127002995
51-200694064: RNCC: 2 | RNVC: 2
2A28/SB2-3: RNCC: 3 | RNVC: 2
2A28-SB2-3: RNCC: 5 | RNVC: 9

4 Dec 1991

5340-12-022-0098

5340-12-382-2232
Access Cover

123822232
108081280002: RNCC: 3 | RNVC: 2

25 May 2010

5340-12-331-2829
Resilient Mount

123312829
DIN95363-A20X15-M6X15-CR40ST: RNCC: 2 | RNVC: 2
10000220160: RNCC: 3 | RNVC: 2
500021-M6X15.CR40.ST: RNCC: 5 | RNVC: 2
VG95363-A20X15-M6X15-CR40ST: RNCC: 5 | RNVC: 9
16903-SMQ400: RNCC: 5 | RNVC: 9
16903-SMQ400: RNCC: 5 | RNVC: 9

15 Apr 1993

5340-12-327-5108
Webbing Strap

123275108
5802291-20800: RNCC: 2 | RNVC: 2
5802291-20800: RNCC: 3 | RNVC: 2
4840451-20800: RNCC: 5 | RNVC: 2

29 Jan 1992

5340-12-315-7941
Angle Bracket

123157941
51974800417: RNCC: 3 | RNVC: 2
51.97480-0417: RNCC: 5 | RNVC: 2

26 Nov 1988

5340-12-347-2244
Helical Compression Spring Seat

123472244
2460500001: RNCC: 3 | RNVC: 2
(7001)5340123472244: RNCC: 5 | RNVC: 2
42530477: RNCC: 5 | RNVC: 2

13 Nov 1998

5340-12-393-3002
Mounting Bracket

123933002
500220: RNCC: 3 | RNVC: 2
3006: RNCC: 5 | RNVC: 2

5 Sep 2013

5340-12-393-2747
Dust And Moisture Seal Protective Cap-Plug

123932747
300F24RAL3000: RNCC: 3 | RNVC: 2
9560136740: RNCC: 5 | RNVC: 2

4 Sep 2013

5340-12-358-6986
Mounting Plate

123586986
2481-390170.000.0: RNCC: 2 | RNVC: 2
2481-390170.000.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-382-8461
Bumper

123828461
205100423: RNCC: 3 | RNVC: 2

16 Aug 2010

5340-12-347-3250
Angle Bracket

123473250
6.232.0.982.003.4: RNCC: 3 | RNVC: 9
1216 2572: RNCC: 5 | RNVC: 2

26 Nov 1998

5340-12-192-3107
Nonmetallic Bumper

121923107
SW4080T033: RNCC: 3 | RNVC: 2
SW4080T033: RNCC: 5 | RNVC: 9

13 Apr 1982

5340-12-329-2116
Mounting Bracket

123292116
016032: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-12-354-9138
Mounting Bracket

123549138
1954364/2: RNCC: 3 | RNVC: 2
1954364-2: RNCC: 5 | RNVC: 2
1954364: RNCC: 5 | RNVC: 9

4 Sep 2001

5340-12-305-0559
Angle Bracket

123050559
A-245845-048: RNCC: 3 | RNVC: 2
A245845-048: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-195-5688
Handwheel

121955688
VG85088-B-175X14-RG: RNCC: 2 | RNVC: 2
VG85088-B-175X14-RG: RNCC: 3 | RNVC: 2
VG85088-B-175X14-RG: RNCC: 3 | RNVC: 2
VG85088-B-175X14-RG: RNCC: 3 | RNVC: 9
B175X14VG85088-RG5: RNCC: 5 | RNVC: 9

14 Mar 1983

5340-12-318-4825
Angle Bracket

123184825
4900368-620021.00: RNCC: 2 | RNVC: 2
4900368-620021.00: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-12-382-7195
Butt Hinge

123827195
1811759: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-12-370-6120
Hand Crank

123706120
131885: RNCC: 3 | RNVC: 2
131885: RNCC: 5 | RNVC: 2

29 Nov 2006

5340-12-194-3894
Door Handle

121943894
281827555: RNCC: 3 | RNVC: 2

28 Oct 1982

5340-12-010-8506

5340-12-317-3213
Mending Plate

123173213
4900064-4122.013: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-130-8316
Handwheel

121308316
DIN390-B100X14-GG: RNCC: 2 | RNVC: 2
B100X14DIN390GG: RNCC: 5 | RNVC: 2
100X14DIN390GG18: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-368-2989
Mounting Plate

123682989
B47460-001: RNCC: 3 | RNVC: 2
B47460001: RNCC: 5 | RNVC: 2

13 Feb 2006

5340-12-187-4746
T Bracket

121874746
033-321000.67.0: RNCC: 3 | RNVC: 2
033-321000.67.0: RNCC: 5 | RNVC: 9
033-321000-67-0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-325-2573
Metal Runner

123252573
58R055-11-3: RNCC: 3 | RNVC: 2

23 May 1991

5340-12-362-8576
Mounting Bracket

123628576
70746-001: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-12-146-9153
Rod End Clevis

121469153
25704-190700.02.0: RNCC: 2 | RNVC: 2
25704-190700.02.0: RNCC: 3 | RNVC: 2
25704-190700-02-0: RNCC: 5 | RNVC: 2
1179-13.00: RNCC: 5 | RNVC: 2
25704-190700-02-0: RNCC: 5 | RNVC: 9
25704-190700.02.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-175-9112
Angle Bracket

121759112
2300109-820000.001.0: RNCC: 2 | RNVC: 2
2300109-820000.001.0: RNCC: 3 | RNVC: 2
2300109-820000.001.0: RNCC: 5 | RNVC: 2
2300109-820000-001-0: RNCC: 5 | RNVC: 9
2300109-820000-001-0: RNCC: 5 | RNVC: 9
2300109-820000.001.0: RNCC: 5 | RNVC: 9

25 Oct 1978

5340-12-353-2119
Angle Bracket

123532119
2500238-042410.007.0: RNCC: 2 | RNVC: 2
2500238-042410.007.0: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-702-9215
Retaining Strap

127029215
VG95211-ML-127029215: RNCC: 2 | RNVC: 2
5.12.6602.1412.98: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-702-4174
Mounting Plate

127024174
VG95211-ML-127024174: RNCC: 2 | RNVC: 2
5.12.7050.0060.11: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-5354
Mounting Bracket

127025354
VG95211-ML-127025354: RNCC: 2 | RNVC: 2
5.51.7204.0450.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-187-7510
Helical Compression Spring Seat

121877510
1215 9671: RNCC: 3 | RNVC: 2
12159671: RNCC: 5 | RNVC: 9
6.226.0.637.062.5: RNCC: 5 | RNVC: 9
6-226-0-637-062-5: RNCC: 5 | RNVC: 9

4 May 1981

5340-12-319-4321
Catch Strike

123194321
2300232-140100.002.0: RNCC: 2 | RNVC: 2
2300232-140100.002.0: RNCC: 3 | RNVC: 2
2300232-140100.002.02: RNCC: 5 | RNVC: 9

2 Oct 1989

5340-12-312-7425
Dust And Moisture Seal Protective Plug

123127425
301130-0783.10: RNCC: 3 | RNVC: 2

2 Feb 1988

5340-12-322-9326
Nonmetallic Bumper

123229326
704-180110-908-0: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-12-308-2976
Pad Eye

123082976
2300223-200000.05.0: RNCC: 2 | RNVC: 2
2300223-200000.05.0: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-163-3197
Expansion Plug

121633197
4039970420: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-325-5931
Helical Compression Spring Seat

123255931
2410120012: RNCC: 3 | RNVC: 2
8690741820: RNCC: 5 | RNVC: 2

20 Jun 1991

5340-12-340-2445
Mounting Plate

123402445
463-630730.001: RNCC: 3 | RNVC: 9
9892455: RNCC: 5 | RNVC: 9

19 Mar 1996

5340-12-334-4883
Runner

123344883
104-141000-904-0: RNCC: 2 | RNVC: 2
104-141000-904-0: RNCC: 3 | RNVC: 2

16 May 1994

5340-12-349-2843
Butt Hinge Leaf

123492843
J52423622-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-187-1054
Retaining Strap

121871054
53-1195-010-10: RNCC: 3 | RNVC: 2

5 Mar 1981

5340-12-191-3960
Expansion Plug

121913960
DIN443-18-2.0321.26: RNCC: 2 | RNVC: 2
DIN443-18-CUZN37F38: RNCC: 5 | RNVC: 2
01152708: RNCC: 5 | RNVC: 2
18DIN443CUZN37F38: RNCC: 5 | RNVC: 2
6.0215.21.5.1018: RNCC: 5 | RNVC: 9

1 Feb 1982

5340-12-172-2775
Clamping Catch

121722775
VG95136B2-38X28: RNCC: 2 | RNVC: 2
VG95136-B2-38X28: RNCC: 3 | RNVC: 2
VG95136B2-38X28: RNCC: 3 | RNVC: 2
500.077: RNCC: 3 | RNVC: 2
602K0208-000-00.3: RNCC: 3 | RNVC: 2
2360-261480.02.0: RNCC: 5 | RNVC: 2
2360-261480.02.0: RNCC: 5 | RNVC: 2
2360-261480-02-0: RNCC: 5 | RNVC: 2
2360-261480.02.0: RNCC: 5 | RNVC: 2
2360-261480-02-0: RNCC: 5 | RNVC: 9

10 Jan 1978

5340-12-165-7878
Retaining Strap

121657878
2500001-191800.01.0: RNCC: 2 | RNVC: 2
2500001-191800.01.0: RNCC: 3 | RNVC: 2
2500001-191800-01-0: RNCC: 5 | RNVC: 2
2500001-191800-01-0: RNCC: 5 | RNVC: 9
2500001-191800.01.0: RNCC: 5 | RNVC: 9

26 Jun 1976

5340-12-379-5185
Angle Bracket

123795185
102D066140.000.0: RNCC: 2 | RNVC: 2
102D066140.000.0: RNCC: 3 | RNVC: 2

3 Aug 2009

5340-12-303-5956
Dust And Moisture Seal Protective Plug

123035956
63375.5: RNCC: 3 | RNVC: 2

11 Apr 1985

5340-12-347-2986
Access Cover

123472986
B-301927: RNCC: 3 | RNVC: 2
301 927: RNCC: 5 | RNVC: 2

24 Nov 1998

5340-12-356-6081
Dust And Moisture Seal Protective Cap-Plug

123566081
FF08-0-SW001: RNCC: 3 | RNVC: 2

15 Mar 2002

5340-12-181-1267
Dust And Moisture Seal Protective Cap

121811267
312.695.1: RNCC: 3 | RNVC: 2
435589016309: RNCC: 3 | RNVC: 2
60198-5: RNCC: 5 | RNVC: 9
60198.5: RNCC: 5 | RNVC: 9

29 Oct 1979

5340-12-332-8383
Handle Grip

123328383
201.229.00.0: RNCC: 3 | RNVC: 2

24 Sep 1993

5340-12-186-0422
Expansion Shield

121860422
7-50: RNCC: 3 | RNVC: 9
00110009: RNCC: 5 | RNVC: 9

25 Nov 1980

5340-12-385-9771
Manual Control Lever

123859771
2481-514230.002.0: RNCC: 2 | RNVC: 2
2481-514230.002.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-167-3502
Handle Grip

121673502
11-5-4-30: RNCC: 3 | RNVC: 2

16 Dec 1976

5340-12-182-8279
Snap Hook

121828279
DIN5299-A35NI: RNCC: 2 | RNVC: 2
DIN5299-A35-VERNICKELT: RNCC: 3 | RNVC: 2
R5001 1/2-35 VERZINKT: RNCC: 3 | RNVC: 9
DIN5299A35NI: RNCC: 5 | RNVC: 2
A35DIN5299VERNICKELT: RNCC: 5 | RNVC: 2
5001 1/2-35 VERZINKT: RNCC: 5 | RNVC: 9

27 Feb 1980

5340-12-174-4692
Loop Clamp

121744692
DIN3016-1-A2-10-15X15-W1-2: RNCC: 2 | RNVC: 2
RS1.10-15/15: RNCC: 3 | RNVC: 2
DIN3016-A2-10-15X15-W1-2: RNCC: 3 | RNVC: 2
4217012010: RNCC: 5 | RNVC: 2
RS1100-10-15-15: RNCC: 5 | RNVC: 2
RS1100.10-15/15: RNCC: 5 | RNVC: 2
DIN3016-A2-10-15X15-W1-2: RNCC: 5 | RNVC: 9

3 Jul 1978

5340-12-316-4806
Mounting Plate

123164806
P-087043-007: RNCC: 3 | RNVC: 2
P087043-007: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-328-4711
Electrical-Mechanical Equipment Post

123284711
C42080-A32-C18: RNCC: 2 | RNVC: 2
C42080-A32-C18: RNCC: 3 | RNVC: 2

22 May 1992

5340-12-316-1834
Nonmetallic Bumper

123161834
0A610.50-00-00-00-012: RNCC: 2 | RNVC: 2
837-10X2-CR37-5.5440: RNCC: 3 | RNVC: 2
0A610.50-00-00-00-012: RNCC: 3 | RNVC: 2
149174: RNCC: 5 | RNVC: 2

29 Dec 1988

5340-12-302-6886
Dust And Moisture Seal Protective Plug

123026886
1042692: RNCC: 3 | RNVC: 2
1-902-8A-4: RNCC: 5 | RNVC: 2
042692: RNCC: 5 | RNVC: 9

23 Jan 1985

5340-12-312-7863
Ball Socket Seat

123127863
DIN71805-A10-A3P: RNCC: 2 | RNVC: 2
505236: RNCC: 3 | RNVC: 2
010-0050-924-617: RNCC: 5 | RNVC: 2
7910020453: RNCC: 5 | RNVC: 2

4 Feb 1988

5340-12-324-4154
Eye Hook

123244154
160.30.0003: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-12-177-2744
Detent Plunger

121772744
5800822-051-012: RNCC: 3 | RNVC: 2
5800822-051.012: RNCC: 5 | RNVC: 2

24 Jan 1979

5340-12-179-0543
Electrical-Mechanical Equipment Post

121790543
10450-04: RNCC: 3 | RNVC: 2
477112-004: RNCC: 5 | RNVC: 2

1 Jun 1979

5340-12-158-1148
Spring Tension Clip

121581148
431271200420: RNCC: 3 | RNVC: 2
5800357-200000-17: RNCC: 5 | RNVC: 9
5800357-200000.17: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-094-0967

5340-12-375-5118
Spring Tension Clip

123755118
L246M2025206: RNCC: 3 | RNVC: 2

10 Jun 2008

5340-12-355-1143
Manual Control Lever

123551143
130713: RNCC: 3 | RNVC: 2

9 Oct 2001

5340-12-358-8599
Mending Plate

123588599
DSAN003: RNCC: 3 | RNVC: 2

22 Nov 2002

5340-12-358-0737
Angle Bracket

123580737
2300042-255165.000: RNCC: 2 | RNVC: 2
2300042-255165.000: RNCC: 3 | RNVC: 2

10 Sep 2002

5340-12-025-9440

5340-12-361-7749
Manual Control Handle

123617749
0007580402: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-12-194-2219
Webbing Strap

121942219
23182-7210: RNCC: 2 | RNVC: 2
23182-7210: RNCC: 3 | RNVC: 2
23182-7210: RNCC: 5 | RNVC: 9

12 Oct 1982

5340-12-375-2283
Access Cover

123752283
L851M1855811: RNCC: 3 | RNVC: 2

6 May 2008

5340-12-150-0615

5340-12-177-2114
Retaining Strap

121772114
1539950220: RNCC: 3 | RNVC: 2

19 Jan 1979

5340-12-135-9847

5340-12-343-8039
Clamping Catch

123438039
0000100085: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-12-026-9447

5340-12-384-6641
Mounting Plate

123846641
I001209: RNCC: 3 | RNVC: 2
4052063012090: RNCC: 5 | RNVC: 2

17 Mar 2011

5340-12-356-0075
Mounting Bracket

123560075
0.0.425.05: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-12-341-8366
Lock-Release Lever

123418366
1000173-190350.001.0: RNCC: 2 | RNVC: 2
1000173-190350.001.0: RNCC: 3 | RNVC: 2

1 Nov 1996

5340-12-392-3628
Spring Loaded Cylinder Fastener

123923628
GN612-8-M12X1,5-B: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-168-1617
Retaining Strap

121681617
WW410665A: RNCC: 3 | RNVC: 2
WW410665A: RNCC: 5 | RNVC: 2
WW 410 665 A: RNCC: 5 | RNVC: 2
WW410665A: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-343-3403
Angle Bracket

123433403
23176-390000.05.0: RNCC: 2 | RNVC: 2
23176-390000.05.0: RNCC: 3 | RNVC: 2

10 Jun 1997

5340-12-188-4652
Spring Tension Clip

121884652
023-140000-12-0: RNCC: 3 | RNVC: 2

13 Jul 1981

5340-12-354-8530
Dust And Moisture Seal Protective Cover

123548530
VG95211-ML-123548530: RNCC: 2 | RNVC: 2
P-876428-001: RNCC: 3 | RNVC: 2
P876428-001: RNCC: 5 | RNVC: 2

30 Aug 2001

5340-12-189-7682
Handwheel

121897682
VG85082-A-160X14: RNCC: 2 | RNVC: 2
VG85082-A-160X14: RNCC: 3 | RNVC: 2
VG85082-A-160X14: RNCC: 3 | RNVC: 2
VG85082-A-160X14: RNCC: 3 | RNVC: 9
A160X14VG85082GCUSN5ZNPB: RNCC: 5 | RNVC: 2
A160X14VG85082: RNCC: 5 | RNVC: 2
A160X14VG85082-RG5: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-12-700-8779
Loop Clamp

127008779
VG95211-ML-127008779: RNCC: 2 | RNVC: 2
1676S-52-37-1: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-349-4007
Mounting Plate

123494007
4653 314 022: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-12-382-1742
Mounting Bracket

123821742
X00030391: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-335-5343
Mounting Bracket

123355343
6020900241: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-12-363-2904
Fuehrungs- Schiene

123632904
599.076.007.021: RNCC: 3 | RNVC: 2
81668022153: RNCC: 5 | RNVC: 2

20 May 2004

5340-12-198-5076
Nonmetallic Bumper

121985076
86-1559-201000.009.0: RNCC: 3 | RNVC: 2
86-1559-201000.009.0: RNCC: 5 | RNVC: 9

3 Feb 1984

5340-12-180-9394
Angle Bracket

121809394
2500035-132000-00: RNCC: 2 | RNVC: 2
2500035-132000-00: RNCC: 5 | RNVC: 2
2500035-132000.00: RNCC: 5 | RNVC: 9

12 Oct 1979

5340-12-189-0582
Electronic Equipment Hardware Kit

121890582
409042548: RNCC: 3 | RNVC: 2
409.042 548: RNCC: 5 | RNVC: 2
38 702-039: RNCC: 5 | RNVC: 2
38702-039: RNCC: 5 | RNVC: 2
409-042548: RNCC: 5 | RNVC: 9

24 Aug 1981

5340-12-175-6592
Loop Clamp

121756592
099-922-006-6: RNCC: 3 | RNVC: 2

10 Oct 1978

5340-12-313-6289
Nonmetallic Bumper

123136289
LN9108-D28XH5-5.5440.7: RNCC: 2 | RNVC: 2
98103701: RNCC: 3 | RNVC: 2
LN9108-D28XH5-5.5440.7: RNCC: 3 | RNVC: 2
98103701: RNCC: 5 | RNVC: 2
82200-LN9108-D28X5H-5.5440.7: RNCC: 5 | RNVC: 9

21 Apr 1988

5340-12-313-3284
Pad Eye

123133284
1900037-70-04: RNCC: 2 | RNVC: 2
352848: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-12-327-2817
Webbing Strap

123272817
5803702-110200.00: RNCC: 2 | RNVC: 2
7802180290: RNCC: 3 | RNVC: 2
78021 80290: RNCC: 5 | RNVC: 9

7 Jan 1992

5340-12-359-2151
Angle Bracket

123592151
J21520059-401: RNCC: 3 | RNVC: 2

13 Jan 2003

5340-12-349-1755
Loop Clamp

123491755
H20.14D-14V: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-12-702-7935
Clamping Catch

127027935
25-08301123734: RNCC: 2 | RNVC: 2

20 Dec 1995

5340-12-312-5442
Retaining Clip

123125442
4200081-151120.001: RNCC: 3 | RNVC: 2
4200081-151120.001: RNCC: 5 | RNVC: 9
9843783: RNCC: 5 | RNVC: 9
4200081-151120.001: RNCC: 5 | RNVC: 9

15 Jan 1988

5340-12-344-0499
Mounting Bracket

123440499
2996.06.90: RNCC: 3 | RNVC: 2
2996.0690: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-191-8022
Loop Clamp

121918022
1124921140: RNCC: 3 | RNVC: 2

8 Mar 1982

5340-12-319-7305
Nonmetallic Bumper

123197305
201970: RNCC: 3 | RNVC: 2
403499: RNCC: 5 | RNVC: 2

30 Oct 1989

5340-12-332-3923
Mending Plate

123323923
DKAU020: RNCC: 3 | RNVC: 2

5 Aug 1993

5340-12-315-0553
Mending Plate

123150553
4900153-11155-00-03: RNCC: 3 | RNVC: 2
4900153-11155-03: RNCC: 5 | RNVC: 9

10 Sep 1988

5340-12-301-3824
Angle Bracket

123013824
P-855271-401: RNCC: 3 | RNVC: 2
P855271-401: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-12-174-7657
Swivel Caster

121747657
441T28R200LZPK: RNCC: 3 | RNVC: 2
441-28R0200-20NT0BL0CK: RNCC: 5 | RNVC: 2
441-28-RO/200/20-N/TOBLOCK: RNCC: 5 | RNVC: 2
DIN8458B3-200X60A1T0BL0CK: RNCC: 5 | RNVC: 9

1 Aug 1978

5340-12-305-0566
Mending Plate

123050566
P-230330-019: RNCC: 3 | RNVC: 2
P230330-019: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-340-6709
Mounting Plate

123406709
V0044: RNCC: 3 | RNVC: 2
V0044 (IDVCS065-117.895): RNCC: 5 | RNVC: 2
PL E 7/1 P-27: RNCC: 5 | RNVC: 2

22 May 1996

5340-12-195-9531
Loop Clamp

121959531
M264121: RNCC: 3 | RNVC: 9
M264121: RNCC: 5 | RNVC: 2

5 May 1983

5340-12-377-1241
Mechanical Stop

123771241
300.062.226: RNCC: 3 | RNVC: 2

12 Dec 2008

5340-12-180-8843
Hasp Staple

121808843
320.131378: RNCC: 3 | RNVC: 2
13-1378: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-337-0301
Access Cover

123370301
52.0271.170.00: RNCC: 3 | RNVC: 2

12 Jan 1995

5340-12-356-7481
Angle Bracket

123567481
T622M1203101: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-134-7116

5340-12-194-5381
Expansion Shield

121945381
111867199: RNCC: 3 | RNVC: 2
81.90685.0104: RNCC: 5 | RNVC: 2
81906850104: RNCC: 5 | RNVC: 2

15 Nov 1982

5340-12-382-9713
Mounting Bracket

123829713
JS E0040200: RNCC: 3 | RNVC: 2
62800337: RNCC: 5 | RNVC: 2
IMT01028: RNCC: 5 | RNVC: 2

30 Aug 2010

5340-12-382-9835
Shelf Bracket

123829835
9414709042: RNCC: 3 | RNVC: 2

31 Aug 2010

5340-12-355-7429
Angle Bracket

123557429
4618604314: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-12-128-9654
Nut And Bolt Locking Plate

121289654
635G04002: RNCC: 3 | RNVC: 2
391134: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-351-6138
Webbing Strap

123516138
7802494696: RNCC: 3 | RNVC: 2
78024 94696: RNCC: 5 | RNVC: 9

8 Aug 2000

5340-12-184-8342
Double Angle Bracket

121848342
5801505-312-006: RNCC: 3 | RNVC: 2
5801505-312.006: RNCC: 5 | RNVC: 2

21 Aug 1980

5340-12-362-7086
Loop Clamp

123627086
8.7284.0: RNCC: 3 | RNVC: 2
FR017591-00: RNCC: 5 | RNVC: 2

20 Mar 2004

5340-12-362-2037
Angle Bracket

123622037
1873-015000.002.0: RNCC: 3 | RNVC: 2

23 Jan 2004

5340-12-317-4626
Angle Bracket

123174626
3787319EE3481-03: RNCC: 3 | RNVC: 2
151-420000-901-0: RNCC: 5 | RNVC: 2
151-420000-901-0: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-12-175-8393
Dust And Moisture Seal Protective Plug

121758393
81960020142: RNCC: 3 | RNVC: 2
23230-171005-001-0: RNCC: 5 | RNVC: 9
23230-171005.001.0: RNCC: 5 | RNVC: 9

23 Oct 1978

5340-12-361-4628
Mounting Bracket

123614628
70628: RNCC: 3 | RNVC: 2
70628-620: RNCC: 5 | RNVC: 9

6 Oct 2003

5340-12-702-5810
Mounting Bracket

127025810
VG95211-ML-127025810: RNCC: 2 | RNVC: 2
5.51.8605.0051.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-311-4848
Helical Compression Spring Retainer

123114848
2300216-182510.000.0: RNCC: 2 | RNVC: 2
2300216-182510.000.0: RNCC: 3 | RNVC: 2
604-51.75.201-16: RNCC: 3 | RNVC: 2
604-51-75-201-16: RNCC: 5 | RNVC: 2
2300216-182510.000.0: RNCC: 5 | RNVC: 9

9 Sep 1987

5340-12-337-8718
Mounting Bracket

123378718
1602-101200.000.0: RNCC: 2 | RNVC: 2
1602-101200.000.0: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-12-010-0096

5340-12-352-8769
Bow Handle

123528769
1900 000 126: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-12-092-0895

5340-12-318-6689
Electrical-Mechanical Equipment Post

123186689
2300223-063000.10.0: RNCC: 2 | RNVC: 2
2300223-063000.10.0: RNCC: 3 | RNVC: 2
2300223-063000.10.0: RNCC: 5 | RNVC: 2

4 Aug 1989

5340-12-188-2742
Support Hook

121882742
M10-67.790.07.0: RNCC: 3 | RNVC: 2
M10-67-790-07-0: RNCC: 5 | RNVC: 2
M10-67-790-07-0: RNCC: 5 | RNVC: 9

23 Jun 1981

5340-12-344-3732
Angle Bracket

123443732
A-296710-005: RNCC: 3 | RNVC: 2
A296710-005: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-188-0438
Retaining Strap

121880438
81974200120: RNCC: 3 | RNVC: 2
23251-181601-001-0: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-702-5236
Mounting Bracket

127025236
VG95211-ML-127025236: RNCC: 2 | RNVC: 2
5.51.7010.0150.09: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-182-7614
Retaining Clip

121827614
81908100051: RNCC: 3 | RNVC: 2
N026-0231: RNCC: 5 | RNVC: 2
N026-0231-8: RNCC: 5 | RNVC: 2
81.90810-0051: RNCC: 5 | RNVC: 2
796564: RNCC: 5 | RNVC: 2

25 Feb 1980

5340-12-337-7058
Access Cover

123377058
2300231-180265.001.0: RNCC: 2 | RNVC: 2
2300231-180265.001.0: RNCC: 3 | RNVC: 2

30 Mar 1995

5340-12-180-6686
Loop Clamp

121806686
2300014-208005.00.0: RNCC: 2 | RNVC: 2
2300014-208005.00.0: RNCC: 3 | RNVC: 2
2300014-208005-00-0: RNCC: 5 | RNVC: 2
2300014-208005-00-0: RNCC: 5 | RNVC: 9
2300014-208005.00.0: RNCC: 5 | RNVC: 9

26 Sep 1979

5340-12-368-5509
Mounting Plate

123685509
2300519-184000.002.0: RNCC: 2 | RNVC: 2
2300519-184000.002.0: RNCC: 3 | RNVC: 2

23 Mar 2006

5340-12-307-0765
Mending Plate

123070765
P-230330-043: RNCC: 3 | RNVC: 2
P230330-043: RNCC: 5 | RNVC: 2

6 May 1986

5340-12-301-5082
Mending Plate

123015082
1300062-240000: RNCC: 2 | RNVC: 2
7834675: RNCC: 3 | RNVC: 2
4-7834-675: RNCC: 5 | RNVC: 2
7834-675: RNCC: 5 | RNVC: 2

20 Oct 1984

5340-12-325-1551
Clamping Catch

123251551
TL-20-102-52: RNCC: 3 | RNVC: 2
TL803B-1: RNCC: 5 | RNVC: 9
TL803B1: RNCC: 5 | RNVC: 9

8 May 1991

5340-12-344-4281
Angle Bracket

123444281
P-967410-010: RNCC: 3 | RNVC: 2
P967410-010: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-311-2720
Mending Plate

123112720
1304974: RNCC: 3 | RNVC: 2
4300.165.00.00.027: RNCC: 5 | RNVC: 2
4300.165.00/27: RNCC: 5 | RNVC: 2

11 Aug 1987

5340-12-373-1631
Retaining Strap

123731631
1249950620: RNCC: 3 | RNVC: 2
124 995 06 20: RNCC: 5 | RNVC: 2

5 Oct 2007

5340-12-359-7337
Mounting Bracket

123597337
S281M3040101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-318-5852
Mending Plate

123185852
4358577911: RNCC: 3 | RNVC: 2
4358577911: RNCC: 3 | RNVC: 9
A4358577911: RNCC: 5 | RNVC: 9

31 Jul 1989

5340-12-347-3609
Loop Clamp

123473609
058400004018: RNCC: 3 | RNVC: 2
521154708: RNCC: 5 | RNVC: 2
0003384445: RNCC: 5 | RNVC: 2

1 Dec 1998

5340-12-090-7328

5340-12-305-0581
Angle Bracket

123050581
A-296712-138: RNCC: 3 | RNVC: 2
A296712-138: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-369-8409
Manual Control Handle

123698409
SK872-193520.000.0: RNCC: 3 | RNVC: 2
7081546: RNCC: 5 | RNVC: 2

21 Aug 2006

5340-12-344-3545
Mounting Bracket

123443545
A-296712-155: RNCC: 3 | RNVC: 2
A296712-155: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-389-4842
Handwheel

123894842
85082.AL.100.12H: RNCC: 3 | RNVC: 2
02-01-020-15-01 FORM B: RNCC: 5 | RNVC: 9

12 Jul 2012

5340-12-353-8312
Loop Clamp

123538312
DIN3016-1-B1-50X9-W1-2: RNCC: 2 | RNVC: 2
DIN3016-B1-50X8-W1-2: RNCC: 3 | RNVC: 2
RSO.50/9: RNCC: 3 | RNVC: 2
DIN3016-B1-50X9-W1-2: RNCC: 5 | RNVC: 9

14 May 2001

5340-12-377-3302
Nut And Bolt Head Protective Cap

123773302
SW32-1-G37: RNCC: 3 | RNVC: 2

9 Jan 2009

5340-12-702-0213
Retaining Strap

127020213
VG95211-ML-127020213: RNCC: 2 | RNVC: 2
200N127-3: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-343-7219
Mounting Bracket

123437219
23302-182310.00: RNCC: 2 | RNVC: 2
WRYUG2036: RNCC: 3 | RNVC: 2
1-2888-157: RNCC: 3 | RNVC: 2
2888157: RNCC: 5 | RNVC: 2
2888157: RNCC: 5 | RNVC: 2
1-2888-157: RNCC: 5 | RNVC: 2

17 Jul 1997

5340-12-175-2444
Dust And Moisture Seal Protective Plug

121752444
6.4218-0013.1: RNCC: 3 | RNVC: 2
6-4218-0013-1: RNCC: 5 | RNVC: 2

4 Sep 1978

5340-12-351-8959
Access Cover

123518959
5L.6097.013.37: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-12-392-9875
Mending Plate

123929875
9270953002: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-12-347-2109
Retaining Strap

123472109
54.1094.290.00: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-12-179-6967
Angle Bracket

121796967
4254760436: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-12-319-3451
Shimmy Damper

123193451
082430: RNCC: 3 | RNVC: 2
91621186: RNCC: 5 | RNVC: 2

25 Sep 1989

5340-12-193-8725
Double Angle Bracket

121938725
5544109: RNCC: 3 | RNVC: 2
554.4109: RNCC: 5 | RNVC: 2

8 Sep 1982

5340-12-347-8239
Dust And Moisture Seal Protective Cap

123478239
005099 0000: RNCC: 3 | RNVC: 2

18 Feb 1999

5340-12-367-0140
Angle Bracket

123670140
5961LL2005346: RNCC: 3 | RNVC: 2

29 Jun 2005

5340-12-183-1058
Access Cover

121831058
42013419: RNCC: 3 | RNVC: 2
42013419EE5052-81: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-176-1943
Loop Clamp

121761943
PAN4231CDDC5820: RNCC: 3 | RNVC: 2

13 Nov 1978

5340-12-025-8911

5340-12-316-2890
Helical Compression Spring Seat

123162890
6375444: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-149-0900
Mending Plate

121490900
121G08021: RNCC: 3 | RNVC: 2
28200981839: RNCC: 5 | RNVC: 2
8200981839: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-4353
Bridge Clamp

121964353
66.3851.435.04-A001: RNCC: 3 | RNVC: 2
196661: RNCC: 5 | RNVC: 2

6 Jul 1983

5340-12-125-5005

5340-12-305-4305
Compression Cup

123054305
TFH39,8-60-7,5-4TF/529: RNCC: 3 | RNVC: 2
TFH39,8-60-7,5: RNCC: 5 | RNVC: 2
TFH39,8X60X7,5-4TF/529: RNCC: 5 | RNVC: 2

5 Nov 1985

5340-12-327-7383
Mounting Plate

123277383
5600023-200250.002.0: RNCC: 2 | RNVC: 2
5600023-200250.002.0: RNCC: 3 | RNVC: 2
1519644: RNCC: 5 | RNVC: 2

25 Feb 1992

Load More Results