What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 21 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 21 of 178

5340-12-701-3126
Mounting Bracket

127013126
VG95211-ML-127013126: RNCC: 2 | RNVC: 2
5.12.5101.7773.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5127
Retaining Strap

127025127
VG95211-ML-127025127: RNCC: 2 | RNVC: 2
5.51.6501.1340.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-3561
Double Angle Bracket

123073561
2300041-180230.02: RNCC: 2 | RNVC: 2
790-52.30.115-02: RNCC: 3 | RNVC: 2
2300041-180230.02: RNCC: 5 | RNVC: 9

9 Jun 1986

5340-12-701-3504
Loop Clamp

127013504
VG95211-ML-127013504: RNCC: 2 | RNVC: 2
5.12.5111.4006.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-383-8857
Clamping Catch

123838857
NO PRIMARY REF 12-383-8857: RNCC: 3 | RNVC: 2
30-521+02-531: RNCC: 5 | RNVC: 2

16 Dec 2010

5340-12-170-9484
Webbing Strap

121709484
5800044-1014.00: RNCC: 2 | RNVC: 2
5800044-1014.00: RNCC: 3 | RNVC: 2
79052-0600: RNCC: 3 | RNVC: 2
5800044-1014.00: RNCC: 3 | RNVC: 2
ZG8108G025: RNCC: 5 | RNVC: 2
5800044-1014-00: RNCC: 5 | RNVC: 9
5800044-1014.00: RNCC: 5 | RNVC: 9
ZG8108G025: RNCC: 5 | RNVC: 9
5800044-1014-00: RNCC: 5 | RNVC: 9
000-D9-20X2,0X600-PE-RAL6031: RNCC: 6 | RNVC: 9

24 Aug 1977

5340-12-125-0754
Nut And Bolt Locking Plate

121250754
23302-101200.43: RNCC: 2 | RNVC: 2
0049025: RNCC: 5 | RNVC: 2
8403743: RNCC: 5 | RNVC: 2
0049-025: RNCC: 5 | RNVC: 2
23302-101200-43: RNCC: 5 | RNVC: 9
23302-101200.43: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5306
Mounting Bracket

127025306
VG95211-ML-127025306: RNCC: 2 | RNVC: 2
5.51.7040.0040.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-304-7984
Support Hook

123047984
15150-08-74-276-00-2: RNCC: 3 | RNVC: 2
15150-08-74-276-00-2: RNCC: 5 | RNVC: 9
15150-08-74-276-00-2: RNCC: 5 | RNVC: 9

26 Aug 1985

5340-12-370-6981
Nonmetallic Bumper

123706981
130301/7323-21-00-11: RNCC: 3 | RNVC: 2
859689: RNCC: 5 | RNVC: 2

11 Dec 2006

5340-12-388-0268
Mechanical Stop

123880268
F1.1697-00-01-11.20-00: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-12-168-1612
Retaining Strap

121681612
WW410615A: RNCC: 3 | RNVC: 2
WW 410 615 A: RNCC: 5 | RNVC: 2
WW410615A: RNCC: 5 | RNVC: 2
WW410615A: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-359-0678
Angle Bracket

123590678
3815282340: RNCC: 3 | RNVC: 2

13 Dec 2002

5340-12-314-3652
Angle Bracket

123143652
28390780041: RNCC: 3 | RNVC: 2

30 Jun 1988

5340-12-389-1729
Strap Fastener Loop

123891729
987921: RNCC: 3 | RNVC: 2

31 May 2012

5340-12-385-0818
Mounting Plate

123850818
867000311: RNCC: 3 | RNVC: 2

28 Apr 2011

5340-12-192-6780
Lock-Release Lever

121926780
4605045040: RNCC: 3 | RNVC: 2
9450700106: RNCC: 5 | RNVC: 2
1312-74: RNCC: 5 | RNVC: 2
721 1 17 035 1: RNCC: 5 | RNVC: 9

17 May 1982

5340-12-325-1550
Catch Strike

123251550
NO PRIMARY REF 12-325-1550: RNCC: 3 | RNVC: 2
TL800-6-1: RNCC: 5 | RNVC: 9

8 May 1991

5340-12-352-3377
Mending Plate

123523377
2500238-041000.005.0: RNCC: 2 | RNVC: 2
2500238-041000.005.0: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-12-312-3986
Expansion Plug

123123986
DIN443-B28-2.0335.10: RNCC: 2 | RNVC: 2
DIN443-B28-2-0335-10: RNCC: 5 | RNVC: 2
DIN443-B28-CUZN36F30: RNCC: 5 | RNVC: 2

28 Dec 1987

5340-12-336-9615
Strap Fastener Loop

123369615
2500243-986000.00: RNCC: 2 | RNVC: 2
2768.03-6000.00: RNCC: 3 | RNVC: 2
2500243-986000.00: RNCC: 5 | RNVC: 2

2 Jan 1995

5340-12-378-0703
Mounting Bracket

123780703
320.001-065: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-358-4251
Access Cover

123584251
4000A-341230.000.0: RNCC: 2 | RNVC: 2
4000A-341230.000.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-348-6801
Retaining Strap

123486801
160-77870-04: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-12-178-7683
Angle Bracket

121787683
C145-A5-C239: RNCC: 2 | RNVC: 2
C145-A5-C239: RNCC: 3 | RNVC: 2
C145A5C239: RNCC: 5 | RNVC: 2
C145A5C239: RNCC: 5 | RNVC: 2
C145-A5-C239: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-161-9585
Angle Bracket

121619585
100332-12200.12: RNCC: 2 | RNVC: 2
100332-12200-12: RNCC: 5 | RNVC: 2
100332-12200.12: RNCC: 5 | RNVC: 2
100332-12200-12: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-1465
Mounting Plate

127021465
VG95211-ML-127021465: RNCC: 2 | RNVC: 2
30.6110.140: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-309-0434
Webbing Strap

123090434
2500171-113000.00: RNCC: 2 | RNVC: 2
2500171-113000.00: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-12-184-3242
Loop Clamp

121843242
TS10: RNCC: 3 | RNVC: 2
0803882: RNCC: 5 | RNVC: 2
250870000008: RNCC: 5 | RNVC: 2
DZ0803882: RNCC: 5 | RNVC: 2
5N.3821.021.08: RNCC: 5 | RNVC: 2
5N3821-021-08: RNCC: 5 | RNVC: 9
TS10: RNCC: 5 | RNVC: 9

17 Jul 1980

5340-12-357-4043
Loop Clamp

123574043
J92228186-001: RNCC: 3 | RNVC: 2
6706378: RNCC: 5 | RNVC: 2

18 Jun 2002

5340-12-356-0619
Angle Bracket

123560619
2510-12000666: RNCC: 2 | RNVC: 2
4617911311: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-12-176-7749
Angle Bracket

121767749
51-6861-560-03: RNCC: 3 | RNVC: 2

18 Dec 1978

5340-12-161-0363
Rod End Connector

121610363
160-24201-01: RNCC: 3 | RNVC: 2
160-24201-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-170-8058
Extension Drawer Slide Section

121708058
5801282-24: RNCC: 3 | RNVC: 2

11 Aug 1977

5340-12-330-2085
Electrical-Mechanical Equipment Post

123302085
588.10-400000-017: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-12-367-6511
Arched Cushion

123676511
J28230215-001: RNCC: 3 | RNVC: 2

20 Sep 2005

5340-12-346-1937
Metal Grille

123461937
VG95211-ML-123461937: RNCC: 2 | RNVC: 2
1121-63165: RNCC: 3 | RNVC: 2

25 Jun 1998

5340-12-164-4026
Retaining Strap

121644026
23290-121110.001: RNCC: 2 | RNVC: 2
23290-121110.001: RNCC: 3 | RNVC: 2
23290-121110-001: RNCC: 5 | RNVC: 9
23290-121110.001: RNCC: 5 | RNVC: 9
23290-121110.001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-151-4817
Rod End Clevis

121514817
23111-5301.14: RNCC: 2 | RNVC: 2
23111-5301.14: RNCC: 3 | RNVC: 2
23111-5301.14: RNCC: 5 | RNVC: 2
23111-5301-14: RNCC: 5 | RNVC: 2
23111-5301.14: RNCC: 5 | RNVC: 9
1119278: RNCC: 5 | RNVC: 9
23111-5301-14: RNCC: 5 | RNVC: 9
23111-5301-14: RNCC: 5 | RNVC: 9
23111-5301.14: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-368-7797
Lock-Release Lever

123687797
GN300-78-M8-20-SW: RNCC: 3 | RNVC: 2

19 Apr 2006

5340-12-198-3457
Angle Bracket

121983457
C4080-A6-C66: RNCC: 3 | RNVC: 2

18 Jan 1984

5340-12-337-2794
Pad Eye

123372794
326-55-0100-18: RNCC: 3 | RNVC: 2

10 Feb 1995

5340-12-321-3097
Mounting Plate

123213097
2500067-102400.13: RNCC: 2 | RNVC: 2
2500067-102400.13: RNCC: 3 | RNVC: 2

3 May 1990

5340-12-193-3680
Pad Eye

121933680
5800151-20.03: RNCC: 2 | RNVC: 2
5800151-20.03: RNCC: 3 | RNVC: 2
5800151-20.03: RNCC: 3 | RNVC: 2
5800151-20.03: RNCC: 5 | RNVC: 2
5800151-20.03: RNCC: 5 | RNVC: 9

14 Jul 1982

5340-12-197-4503
Metal Runner

121974503
30819-321(6U): RNCC: 3 | RNVC: 2
30819-321(6U): RNCC: 5 | RNVC: 2

24 Oct 1983

5340-12-197-2340
Rod End Clevis

121972340
A11A173130501A1: RNCC: 3 | RNVC: 2

3 Oct 1983

5340-12-183-8098
Spring Tension Clip

121838098
111937197: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-312-3852
Plain Solid Disk

123123852
4A90114: RNCC: 3 | RNVC: 2

22 Dec 1987

5340-12-191-0875
Pad Eye

121910875
602A518: RNCC: 3 | RNVC: 2

11 Jan 1982

5340-12-300-6732
Double Angle Bracket

123006732
4354900234: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-327-6011
Mounting Plate

123276011
CF 324 681 A: RNCC: 2 | RNVC: 2
CF 324 681 A: RNCC: 3 | RNVC: 2

6 Feb 1992

5340-12-376-8864
Swivel Caster

123768864
LH-POEV 100K-1-ST: RNCC: 3 | RNVC: 2
LH-POEV 100K-1-ST: RNCC: 5 | RNVC: 2

17 Nov 2008

5340-12-329-6444
Butt Hinge Leaf

123296444
R04836-108: RNCC: 2 | RNVC: 2
R04836-108: RNCC: 3 | RNVC: 2

12 Sep 1992

5340-12-344-0603
Lock Key

123440603
570882108-7E311: RNCC: 3 | RNVC: 2
570882108-7E3: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-342-5841
Butt Hinge Leaf

123425841
65302-12011Y120: RNCC: 3 | RNVC: 2

4 Mar 1997

5340-12-356-2415
Mounting Bracket

123562415
2339-010480A05B: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-347-3494
Angle Bracket

123473494
A21-0528: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-12-371-2968
Mounting Bracket

123712968
8350-0004: RNCC: 2 | RNVC: 2
8350-0004: RNCC: 3 | RNVC: 2

12 Mar 2007

5340-12-334-5997
Spacing Threaded Standoff

123345997
VG95148C5,5X3X8-CUZN: RNCC: 2 | RNVC: 2
5.13.083: RNCC: 3 | RNVC: 2
040.15.0023: RNCC: 5 | RNVC: 2
SP02342: RNCC: 5 | RNVC: 2
00.4.005.0030: RNCC: 5 | RNVC: 9

27 May 1994

5340-12-342-5695
Multiple Angle Bracket

123425695
463-069101.001: RNCC: 3 | RNVC: 9
9893930: RNCC: 5 | RNVC: 9

28 Feb 1997

5340-12-338-8341
Mounting Bracket

123388341
463-223547.000: RNCC: 3 | RNVC: 9
9896415: RNCC: 5 | RNVC: 9

30 Aug 1995

5340-12-338-7372
Webbing Strap

123387372
9897800: RNCC: 3 | RNVC: 9
463-151495.000: RNCC: 5 | RNVC: 9

22 Aug 1995

5340-12-124-1223
Retaining Clip

121241223
DIN71805-S13: RNCC: 2 | RNVC: 2
DIN71805-S13: RNCC: 3 | RNVC: 2
06.36127-4403: RNCC: 5 | RNVC: 2
06361274403: RNCC: 5 | RNVC: 2
071805013400: RNCC: 5 | RNVC: 2
S13DIN71805: RNCC: 5 | RNVC: 2
90003936514: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-338-5291
Lock-Release Lever

123385291
01555: RNCC: 3 | RNVC: 2
MM 2110 T 177: RNCC: 5 | RNVC: 2
01555: RNCC: 5 | RNVC: 9
MM 2110 T 177: RNCC: 5 | RNVC: 9
MM 2110 T 177-3: RNCC: 5 | RNVC: 9

24 Jul 1995

5340-12-394-3261
Mounting Plate

123943261
588.91-736000-008: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-12-375-4630
Mounting Bracket

123754630
58R153-26313: RNCC: 2 | RNVC: 2
58R153-26313: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-12-173-9853
Snap Hook

121739853
DIN5299-E140BK: RNCC: 2 | RNVC: 2
DIN5299-E140-ROH: RNCC: 3 | RNVC: 2
226-140X12 BLANK: RNCC: 3 | RNVC: 9
E140DIN5299BLANK: RNCC: 5 | RNVC: 2

26 May 1978

5340-12-181-7214
Turnbuckle

121817214
WANTENSPANNER-M8-2 GABELN-ZN: RNCC: 3 | RNVC: 2
5700008V: RNCC: 3 | RNVC: 2
8605-M8: RNCC: 5 | RNVC: 2

12 Dec 1979

5340-12-325-7077
Angle Bracket

123257077
1280505-1.032: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-12-317-1668
Angle Bracket

123171668
C249-A11-C85: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-12-362-2716
Mounting Plate

123622716
J92228003-007: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-306-6496
Nonmetallic Bumper

123066496
2730-2175-00: RNCC: 3 | RNVC: 2

18 Mar 1986

5340-12-366-7354
Retaining Strap

123667354
700325035108: RNCC: 3 | RNVC: 2
1/1D11-35MMN325: RNCC: 5 | RNVC: 2

1 Jun 2005

5340-12-325-9914
Webbing Strap

123259914
5801984-985500.000.0: RNCC: 2 | RNVC: 2
5801984-985500.000.0: RNCC: 3 | RNVC: 2
5801984-985500.000.0: RNCC: 5 | RNVC: 2
5801984-985500.000.0: RNCC: 5 | RNVC: 2

29 Jul 1991

5340-12-351-7685
Staub- Und F Kappe

5340-12-314-3546

5340-12-367-5458
Mounting Bracket

123675458
H10723: RNCC: 3 | RNVC: 2

31 Aug 2005

5340-12-194-1461
Access Cover

121941461
KT0337040: RNCC: 3 | RNVC: 2
KT033.7040: RNCC: 5 | RNVC: 2

6 Oct 1982

5340-12-153-6777

5340-12-378-8360
Bow Handle

123788360
43 0073 93 02: RNCC: 3 | RNVC: 2
4300739302: RNCC: 5 | RNVC: 2
CV146168: RNCC: 5 | RNVC: 2
10334378: RNCC: 6 | RNVC: 9

18 May 2009

5340-12-333-0021
Runner

123330021
5900046-1200.10: RNCC: 2 | RNVC: 2
21-1200-10: RNCC: 3 | RNVC: 2
21-1200.10: RNCC: 3 | RNVC: 2
21-1200-10: RNCC: 5 | RNVC: 9
21-1200.10: RNCC: 5 | RNVC: 9

20 Oct 1993

5340-12-339-8593
Angle Bracket

123398593
5800748-11181: RNCC: 3 | RNVC: 2

25 Jan 1996

5340-12-124-0234
Expansion Plug

121240234
DIN470-36-ST-PHR: RNCC: 2 | RNVC: 2
06151010118: RNCC: 5 | RNVC: 2
36DIN470PHR: RNCC: 5 | RNVC: 2
06.15101-0118: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-198-2688
Electrical-Mechanical Equipment Post

121982688
C42080-A6-C92: RNCC: 2 | RNVC: 2
C42080-A6-C92: RNCC: 3 | RNVC: 2

6 Jan 1984

5340-12-349-8389
Mounting Bracket

123498389
FAST-301400.02: RNCC: 2 | RNVC: 2
FAST-301400.02: RNCC: 3 | RNVC: 2

14 Jan 2000

5340-12-164-9192
Double Angle Bracket

121649192
681-29300-02: RNCC: 3 | RNVC: 2
681-29300-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-186-4865
Lock-Release Lever

121864865
015-201-14: RNCC: 3 | RNVC: 2
00560106: RNCC: 5 | RNVC: 2

7 Jan 1981

5340-12-155-5034
Butt Hinge Leaf

121555034
VG95211-ML-121555034: RNCC: 2 | RNVC: 2
160-725033: RNCC: 3 | RNVC: 2
160-725033: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-304-4815
Mending Plate

123044815
5801434-200000.01: RNCC: 2 | RNVC: 2
5801434-200000.01: RNCC: 3 | RNVC: 2
5801434-200000.01: RNCC: 5 | RNVC: 9

23 Jul 1985

5340-12-304-2383
Loop Clamp

123042383
WN 414 25-140-ST: RNCC: 3 | RNVC: 2
WN 414 25-140-ST: RNCC: 5 | RNVC: 9
WN41425-140-ST: RNCC: 5 | RNVC: 9

1 Jul 1985

5340-12-190-5771
Clamping Catch

121905771
5801434-401030.00: RNCC: 3 | RNVC: 2
5801434-401030-00: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-162-8725
Retaining Strap

121628725
25 819-001: RNCC: 3 | RNVC: 2
25819-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-143-6376
Loop Clamp

121436376
RSGU1.8035.30/25: RNCC: 3 | RNVC: 2
RSGU1.8035-30/25: RNCC: 5 | RNVC: 2
0009950107: RNCC: 5 | RNVC: 2
0009950107: RNCC: 5 | RNVC: 2
0009950107: RNCC: 5 | RNVC: 2
4218035030: RNCC: 5 | RNVC: 2
RSGU11-035-030-25: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-311-6627
Mending Plate

123116627
535063-0014: RNCC: 3 | RNVC: 2
535063-0014: RNCC: 5 | RNVC: 9
535063-0014.000: RNCC: 5 | RNVC: 9

1 Oct 1987

5340-12-314-5580
Electrical-Mechanical Equipment Post

123145580
512214-0213.000: RNCC: 3 | RNVC: 2
512214-0213: RNCC: 5 | RNVC: 2

19 Jul 1988

5340-12-342-6198
Spacing Threaded Standoff

123426198
U100-2213-001: RNCC: 2 | RNVC: 2
U100-2213-001: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-328-9605
Mending Plate

123289605
C42080-A26-C68: RNCC: 2 | RNVC: 2
C42080-A26-C68: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-142-9398
Rod End Clevis

121429398
A10-23-383-03-0: RNCC: 3 | RNVC: 2
A10-23-383-03-0: RNCC: 5 | RNVC: 2
A10-23-383-03-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-189-6018
Electrical-Mechanical Equipment Post

121896018
P-895013-001: RNCC: 3 | RNVC: 2
P895013-001: RNCC: 5 | RNVC: 2

7 Oct 1981

5340-12-190-9297
Angle Bracket

121909297
NO PRIMARY REF 12-190-9297: RNCC: 3 | RNVC: 2
7502 120600: RNCC: 5 | RNVC: 9
7502120600: RNCC: 5 | RNVC: 9

23 Dec 1981

5340-12-187-8170
Mounting Bracket

121878170
2300109-970187.000.0: RNCC: 2 | RNVC: 2
2300109-970187.000.0: RNCC: 3 | RNVC: 2
2300109-970187.000.0: RNCC: 3 | RNVC: 2
2300109-970187-000-0: RNCC: 5 | RNVC: 2
2300109-970187-000-0: RNCC: 5 | RNVC: 2
2300109-970187-000-0: RNCC: 5 | RNVC: 9
2300109-970187.000.0: RNCC: 5 | RNVC: 9

13 May 1981

5340-12-702-2132
Retaining Strap

127022132
VG95211-ML-127022132: RNCC: 2 | RNVC: 2
30.7221.50: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-336-4701
Helical Compression Spring Seat

123364701
0212 2789: RNCC: 3 | RNVC: 2
2122789EE0178-17: RNCC: 5 | RNVC: 2
212-2789: RNCC: 5 | RNVC: 9

15 Nov 1994

5340-12-145-9327
Luggage Handle

121459327
72 1657: RNCC: 3 | RNVC: 2
721657: RNCC: 5 | RNVC: 2
1932-932: RNCC: 5 | RNVC: 9
932: RNCC: 5 | RNVC: 9
LURAN52: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-372-2842
Quick Release Plunger

123722842
NLM-03036-12: RNCC: 3 | RNVC: 2

4 Jul 2007

5340-12-702-9336
Retaining Strap

127029336
VG95211-ML-127029336: RNCC: 2 | RNVC: 2
T2-25-15: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-325-3755
Electrical-Mechanical Equipment Post

123253755
C22121-Z65-C2: RNCC: 3 | RNVC: 2

29 May 1991

5340-12-350-9127
Loop Clamp

123509127
J28120153-401: RNCC: 3 | RNVC: 2

5 Jun 2000

5340-12-175-3543
Loop Clamp

121753543
LN9491BK4: RNCC: 2 | RNVC: 2

11 Sep 1978

5340-12-389-9212
Clamping Catch

123899212
2220328713: RNCC: 3 | RNVC: 2

13 Sep 2012

5340-12-354-8348
Mounting Bracket

123548348
5400049-116822.02: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-302-5174
Nonmetallic Bumper

123025174
010168: RNCC: 3 | RNVC: 2
406-475-01-16: RNCC: 5 | RNVC: 2
0009190421: RNCC: 5 | RNVC: 2
2695720: RNCC: 5 | RNVC: 2

9 Jan 1985

5340-12-344-5992
Mounting Plate

123445992
0213 0943: RNCC: 3 | RNVC: 2
2130943EE0155-20: RNCC: 5 | RNVC: 9
4320AA2026762: RNCC: 6 | RNVC: 9

12 Nov 1997

5340-12-353-9739
Sliding Stay

123539739
590619-0450.000: RNCC: 3 | RNVC: 2
590619-0450.000: RNCC: 5 | RNVC: 2
590619-0450.000: RNCC: 5 | RNVC: 9

23 May 2001

5340-12-380-8440
Angle Bracket

123808440
601254-201500.03: RNCC: 2 | RNVC: 2
601254-201500.03: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-166-8967
Angle Bracket

121668967
23290-142200.010: RNCC: 2 | RNVC: 2
23290-142200-010: RNCC: 5 | RNVC: 9

29 Oct 1976

5340-12-153-8092
Mending Plate

121538092
100355-400330.02: RNCC: 2 | RNVC: 2
100355-400330.02: RNCC: 3 | RNVC: 2
100355-400330.02: RNCC: 5 | RNVC: 9
100355-400330-02: RNCC: 5 | RNVC: 9
100355-400330-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-8180
Angle Bracket

123568180
ED88-0100-01001-105: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-12-183-6933
Handle Grip

121836933
1000042-190200.18: RNCC: 3 | RNVC: 2
1000042-190200-18: RNCC: 5 | RNVC: 2

13 May 1980

5340-12-365-1718
Strap Hinge Leaf

123651718
5981-185812.000.0: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-338-8711
Mending Plate

123388711
6700017-640110.01: RNCC: 2 | RNVC: 2
6700017-640110.01: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-12-167-5469
Nonmetallic Bumper

121675469
3555940: RNCC: 3 | RNVC: 2
2853-5739-00: RNCC: 5 | RNVC: 2
3555940: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-303-9665
Dust And Moisture Seal Protective Cap

123039665
47-1156-000510.004.0: RNCC: 2 | RNVC: 2
47-1156-000510.004.0: RNCC: 3 | RNVC: 2

24 May 1985

5340-12-700-6132
Flush Lock

127006132
VG95211-ML-127006132: RNCC: 2 | RNVC: 2
5.12.4901.2600.00: RNCC: 3 | RNVC: 2
0501400644779: RNCC: 5 | RNVC: 2

29 Sep 1992

5340-12-319-9531
Angle Bracket

123199531
LM-2698POS2LIG22: RNCC: 3 | RNVC: 2
LM-2698POS2: RNCC: 5 | RNVC: 9

21 Nov 1989

5340-12-161-9267
Retaining Clip

121619267
51-1278-010-016: RNCC: 3 | RNVC: 2
51-1278-010-16: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-306-0129
Mending Plate

123060129
2500301: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-324-0099
Retaining Strap

123240099
22116 10011: RNCC: 3 | RNVC: 2
90564 75240: RNCC: 5 | RNVC: 2

16 Jan 1991

5340-12-347-1015
Nonmetallic Bumper

123471015
729841691: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-12-349-7881
Mounting Plate

123497881
105-40131.08: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-301-3750
Angle Bracket

123013750
4593038971: RNCC: 3 | RNVC: 2

11 Oct 1984

5340-12-322-4307
Access Cover

123224307
1773671: RNCC: 3 | RNVC: 2
1773671: RNCC: 5 | RNVC: 2

21 Aug 1990

5340-12-353-9386
Angle Bracket

123539386
6600211-201700.02: RNCC: 2 | RNVC: 2
6600211-201700.02: RNCC: 3 | RNVC: 2

21 May 2001

5340-12-344-6028
Retaining Bail

123446028
7100129-7000: RNCC: 2 | RNVC: 2
10129-7000: RNCC: 3 | RNVC: 2

13 Nov 1997

5340-12-379-2377
Bumper

123792377
A21-0570.01: RNCC: 3 | RNVC: 2

7 Jul 2009

5340-12-165-3252
Retaining Strap

121653252
307.161-50130.03: RNCC: 3 | RNVC: 2
0307161-50130-03: RNCC: 5 | RNVC: 9

9 Apr 1976

5340-12-306-8274
Angle Bracket

123068274
2800017-500-01: RNCC: 2 | RNVC: 2
25300272: RNCC: 3 | RNVC: 2

8 Apr 1986

5340-12-702-4832
Mounting Bracket

127024832
VG95211-ML-127024832: RNCC: 2 | RNVC: 2
5.51.0607.0170.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-7593
Angle Bracket

127017593
VG95211-ML-127017593: RNCC: 2 | RNVC: 2
5.12.7701.1006.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-378-6382
Loop Clamp

123786382
DIN3016-1-D1-16X9-W1-2-CR: RNCC: 2 | RNVC: 2
80041194: RNCC: 5 | RNVC: 2

28 Apr 2009

5340-12-197-7005
Mending Plate

121977005
A-920236-001: RNCC: 3 | RNVC: 2
A920236-001: RNCC: 5 | RNVC: 2

15 Nov 1983

5340-12-302-5175
Access Cover

123025175
2500109-198900.00.0: RNCC: 2 | RNVC: 2
2500109-198900.00.0: RNCC: 3 | RNVC: 2
2500109-198900-00-0: RNCC: 5 | RNVC: 2
2500109-198900.00.0: RNCC: 5 | RNVC: 9

9 Jan 1985

5340-12-161-3547
Butt Hinge Leaf

121613547
B25X3X1500HAN16515-3-3214-7: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-702-5560
Mounting Plate

127025560
VG95211-ML-127025560: RNCC: 2 | RNVC: 2
5.51.7230.0050.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-192-8968
Bow Handle

121928968
02-0899-181470-00-0: RNCC: 3 | RNVC: 2

3 Jun 1982

5340-12-178-7893
Double Angle Bracket

121787893
1121-45061.05: RNCC: 3 | RNVC: 2
1121-45061-05: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-172-6392
Clamping Catch

121726392
V18L01-1X1AA: RNCC: 3 | RNVC: 2
V18L01-1XAA: RNCC: 5 | RNVC: 9
18L01-1X1AA: RNCC: 5 | RNVC: 9

31 Jan 1978

5340-12-164-2068
Clamp Bolt Assembly

121642068
8469739: RNCC: 3 | RNVC: 2
8065-831: RNCC: 5 | RNVC: 2
8065831: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-179-7808
Angle Bracket

121797808
3611028006: RNCC: 3 | RNVC: 2
5801507-0130-003: RNCC: 5 | RNVC: 2
36110 28006: RNCC: 5 | RNVC: 9
5801507-0130-003: RNCC: 5 | RNVC: 9

30 Jul 1979

5340-12-196-0480
Ball Socket Seat

121960480
00446-001-000: RNCC: 3 | RNVC: 2
446-01: RNCC: 5 | RNVC: 9

24 May 1983

5340-12-198-0516
Dust And Moisture Seal Protective Plug

121980516
100229-01.14: RNCC: 2 | RNVC: 2
225035: RNCC: 3 | RNVC: 2
100229-01.14: RNCC: 5 | RNVC: 2

14 Dec 1983

5340-12-197-5264
Handwheel

121975264
0018-2990-280AL: RNCC: 3 | RNVC: 2
0018-2990-280AL: RNCC: 5 | RNVC: 9

28 Oct 1983

5340-12-190-4474
Resilient Mount

121904474
2K2-BAM-130G: RNCC: 3 | RNVC: 2
2K2-BAM-130G: RNCC: 5 | RNVC: 9
2K2BAM130G: RNCC: 5 | RNVC: 9

26 Nov 1981

5340-12-319-3384
Angle Bracket

123193384
6900117-113000: RNCC: 2 | RNVC: 2
774-062-72: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-12-365-3900
Mounting Bracket

123653900
2500267-190900.002.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-321-9496
Dust And Moisture Seal Protective Plug

123219496
4136.81: RNCC: 3 | RNVC: 2
523330: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-12-308-1416
Electrical-Mechanical Equipment Post

123081416
2859070281: RNCC: 3 | RNVC: 2

5 Sep 1986

5340-12-154-2736
Angle Bracket

121542736
BD2E379: RNCC: 3 | RNVC: 9
BD0002E379: RNCC: 5 | RNVC: 2
BD0002E379: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-304-3365
Spring Tension Clip

123043365
1 74 824: RNCC: 3 | RNVC: 9

5 Jul 1985

5340-12-307-5642
Loop Clamp

123075642
PAN4263-22: RNCC: 3 | RNVC: 2

3 Jul 1986

5340-12-190-9231
Loop Clamp

121909231
DIN3015-LG-1G-10-PP-W1: RNCC: 2 | RNVC: 2
RANG16-110-M6X30DIN931: RNCC: 3 | RNVC: 2
RANE16-110-GLATT-M6X30DIN931: RNCC: 5 | RNVC: 2
RANG16-110-M6X30DIN931: RNCC: 5 | RNVC: 2
DIN3015LKP1G10PP-DP-M6X30DIN931: RNCC: 5 | RNVC: 2
RANE16-110-GLATT-M6X30DIN931: RNCC: 5 | RNVC: 2
VG95932C1-10-PA-W1-M6X30DIN931: RNCC: 5 | RNVC: 9

23 Dec 1981

5340-12-367-3006
Lock-Release Lever

123673006
207-9204: RNCC: 3 | RNVC: 2

1 Aug 2005

5340-12-353-8619
Handwheel

123538619
DIN950-D3-125X12-GG: RNCC: 2 | RNVC: 2

16 May 2001

5340-12-143-5707
Handwheel

121435707
100109-7100-21: RNCC: 3 | RNVC: 2
100109-7100-21: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-5828
Double Angle Bracket

123655828
J28130115-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-356-1228
Mounting Bracket

123561228
2339-170060A00C: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-187-8096
Wood Runner

121878096
C22300-A55-B102: RNCC: 3 | RNVC: 2
C22300A55B102: RNCC: 5 | RNVC: 2

13 May 1981

5340-12-701-9044
Loop Clamp

127019044
VG95211-ML-127019044: RNCC: 2 | RNVC: 2
N29: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-165-0540
Double Angle Bracket

121650540
566-01-01-12-00-000: RNCC: 3 | RNVC: 2
042992: RNCC: 5 | RNVC: 2
566-01-011200000: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-180-5337
Platte

121805337
532104-0247: RNCC: 3 | RNVC: 2
532104-0247.000: RNCC: 5 | RNVC: 9
532104-0247: RNCC: 5 | RNVC: 9

17 Sep 1979

5340-12-378-1391
Access Cover

123781391
9997001-065200.000.0: RNCC: 3 | RNVC: 2

16 Mar 2009

5340-12-355-1149
Snap Hook

123551149
KAMET226-120X11RUSTFRI: RNCC: 3 | RNVC: 9

9 Oct 2001

5340-12-162-5669
Nonmetallic Bumper

121625669
59004901: RNCC: 3 | RNVC: 2
KE65/55KERN-B-QUALRTK55KOMPLETT: RNCC: 3 | RNVC: 2
RT630531S: RNCC: 5 | RNVC: 2
8082-602: RNCC: 5 | RNVC: 2
8082602: RNCC: 5 | RNVC: 2
8430893: RNCC: 5 | RNVC: 2
KE65-55KERNBQUALRTK55: RNCC: 5 | RNVC: 2
S65/55KERN-B-QUALRTK55KOMPLETT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-184-9320
Retaining Strap

121849320
3800028-22: RNCC: 2 | RNVC: 2
3800028-22: RNCC: 3 | RNVC: 2
HT36/3891/02: RNCC: 5 | RNVC: 9
3800028-22: RNCC: 5 | RNVC: 9
3800028-22: RNCC: 5 | RNVC: 9

28 Aug 1980

5340-12-340-4110
Rod End Connector

123404110
CS063: RNCC: 3 | RNVC: 2
CS063 (IDVCS065-117.895): RNCC: 5 | RNVC: 2

10 Apr 1996

5340-12-391-3723
Rod End Connector

123913723
9999015-073320.001.0: RNCC: 3 | RNVC: 2

8 Mar 2013

5340-12-347-8718
Blank Panel

123478718
409066187: RNCC: 3 | RNVC: 2
409-066 187: RNCC: 5 | RNVC: 2
5L.6097.014.24: RNCC: 5 | RNVC: 2

1 Mar 1999

5340-12-334-6200
Mounting Bracket

123346200
T13156: RNCC: 3 | RNVC: 2
T13156: RNCC: 5 | RNVC: 9

31 May 1994

5340-12-026-0771

5340-12-358-8190
Mounting Bracket

123588190
DRAO004: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-314-0420
Angle Bracket

123140420
4424261440: RNCC: 3 | RNVC: 2
442 426 14 40: RNCC: 5 | RNVC: 2

1 Jun 1988

5340-12-193-8320
Mending Plate

121938320
2300094-180500.02.0: RNCC: 3 | RNVC: 2
2300094-180500.02.0: RNCC: 5 | RNVC: 2
2300094-180500-02-0: RNCC: 5 | RNVC: 9
2300094-180500.02.0: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-12-163-7769
Extension Drawer Slide

121637769
5801101-1291-007: RNCC: 3 | RNVC: 2
5801101-1291.007: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-328-6491
Snap Hook

123286491
DIN5299-D200ZN: RNCC: 2 | RNVC: 2
3014015V: RNCC: 3 | RNVC: 2
245-200X15VERZINKT: RNCC: 3 | RNVC: 9
DIN5299D200VERZINKT: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-12-170-6536
Spring Holder

121706536
1400003-14102-08: RNCC: 3 | RNVC: 2
1400003-14102-08: RNCC: 5 | RNVC: 9
1400003-14102.08: RNCC: 5 | RNVC: 9

25 Jul 1977

5340-12-144-9494
Turnbuckle Body

121449494
LN29601B04-445: RNCC: 2 | RNVC: 2
18X1X445M10X1LN29601: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-390-1924
Mounting Plate

123901924
42-14164-302: RNCC: 3 | RNVC: 2

15 Oct 2012

5340-12-130-7738
Expansion Plug

121307738
DIN443-38-ST-ROH: RNCC: 2 | RNVC: 2
38DIN443: RNCC: 5 | RNVC: 2
38DIN443R0H: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-393-5446
Retaining Strap

123935446
06.66040-0317: RNCC: 3 | RNVC: 2
06.66040-0317: RNCC: 5 | RNVC: 2

24 Sep 2013

5340-12-393-8381
Spacing Threaded Standoff

123938381
SLXNCA6-21-F10-G10-N12: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-12-335-0182
Mending Plate

123350182
289G-00-T3A: RNCC: 3 | RNVC: 2

12 Jul 1994

5340-12-305-7762
Mending Plate

123057762
C62122-A89-C24: RNCC: 3 | RNVC: 2

11 Dec 1985

5340-12-333-7937
Mounting Plate

123337937
C230ZZ13101-000: RNCC: 3 | RNVC: 2

8 Feb 1994

5340-12-315-5294
Angle Bracket

123155294
5803471-201310.09: RNCC: 2 | RNVC: 2
65.7789.421.09-A001: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-12-312-6600
Nonmetallic Bumper

123126600
83103-50NO17120.N: RNCC: 3 | RNVC: 2
50 N0 17 120: RNCC: 5 | RNVC: 2
50NO17120: RNCC: 5 | RNVC: 2
50NO17120N: RNCC: 5 | RNVC: 2

25 Jan 1988

5340-12-355-7434
Mounting Bracket

123557434
P-876375-001: RNCC: 3 | RNVC: 2
P876375-001: RNCC: 5 | RNVC: 2

12 Dec 2001

5340-12-185-0010
Halter

121850010
F01-213220-02-0: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-12-701-3719
Rod End Connector

127013719
VG95211-ML-127013719: RNCC: 2 | RNVC: 2
5.12.5305.0030.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-4801
Mounting Bracket

127014801
VG95211-ML-127014801: RNCC: 2 | RNVC: 2
5.12.5811.1461.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-308-3174
Hinge Torsion Bar

123083174
2300223-183000.04.0: RNCC: 2 | RNVC: 2
2300223-183000.04.0: RNCC: 3 | RNVC: 2

25 Sep 1986

5340-12-701-7150
Rod End Clevis

127017150
VG95211-ML-127017150: RNCC: 2 | RNVC: 2
5.12.7601.4013.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-4240
Access Cover

123584240
2500262-190237.000.0: RNCC: 2 | RNVC: 2
2500262-190237.000.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-335-5355
Dust And Moisture Seal Protective Cap

123355355
6062020022: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-12-196-0654
Loop Clamp

121960654
RAPG8-430: RNCC: 3 | RNVC: 2
RAPG8-430: RNCC: 3 | RNVC: 2
RAPE8-430-GLATT: RNCC: 5 | RNVC: 2
8.216.000.069: RNCC: 5 | RNVC: 2
RAPE8-430-GLATT: RNCC: 5 | RNVC: 2
VG95932A4-30-PP-W1-SPV-OHNE DP: RNCC: 5 | RNVC: 9
VG95932DA-4-30-PP-W1-AS-SPV: RNCC: 5 | RNVC: 9

25 May 1983

5340-12-371-5804
Double Angle Bracket

123715804
2300397-189000.019.0: RNCC: 3 | RNVC: 2
1810189: RNCC: 5 | RNVC: 9

19 Apr 2007

5340-12-365-2283
Butt Hinge Leaf

123652283
2500075-190027.002.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-301-7980
Angle Bracket

123017980
1361013-14140.02: RNCC: 3 | RNVC: 2
1361013-14140-02: RNCC: 5 | RNVC: 2

10 Nov 1984

5340-12-187-1003
Plain Solid Disk

121871003
C42326A23C24: RNCC: 3 | RNVC: 2
5800573-182-008: RNCC: 5 | RNVC: 2
C42326-A23-C24: RNCC: 5 | RNVC: 2
5800573-182.008: RNCC: 5 | RNVC: 2

5 Mar 1981

5340-12-377-8090
Mounting Plate

123778090
4060741-150120.00: RNCC: 3 | RNVC: 2
1129029: RNCC: 5 | RNVC: 2

12 Feb 2009

5340-12-198-1098
Angle Bracket

121981098
5801999-190000.07: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-12-300-2793
Plug Button

123002793
0009973535: RNCC: 3 | RNVC: 2
2568-20: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-364-3915
Rod Retainer Clip

123643915
598101-185600.008.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-366-5289
Mounting Plate

123665289
947138477: RNCC: 3 | RNVC: 2
3201-852.01.01.701-000: RNCC: 5 | RNVC: 2

3 May 2005

5340-12-172-9386
Mending Plate

121729386
2500009-0000.10: RNCC: 2 | RNVC: 2
2500009-0000.10: RNCC: 3 | RNVC: 2
2500009-0000.10: RNCC: 3 | RNVC: 2
2500009-0000.10: RNCC: 5 | RNVC: 9
2500009-0000-10: RNCC: 5 | RNVC: 9
2500009-0000-10: RNCC: 5 | RNVC: 9
2500009-0000-10: RNCC: 5 | RNVC: 9

6 Mar 1978

5340-12-332-0653
Angle Bracket

123320653
702-941100-901-0: RNCC: 2 | RNVC: 2
702-941100-901-0: RNCC: 3 | RNVC: 2

20 Jul 1993

5340-12-369-3363
Detent Plunger

123693363
2300515-187750.004.0: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-12-308-6061
Angle Bracket

123086061
512220-0101: RNCC: 3 | RNVC: 2

28 Oct 1986

5340-12-197-3663
Angle Bracket

121973663
R03899-101: RNCC: 3 | RNVC: 2

17 Oct 1983

5340-12-190-4608
Pipe Bracket

121904608
2800017-171: RNCC: 2 | RNVC: 2
25300204: RNCC: 5 | RNVC: 2
259005: RNCC: 5 | RNVC: 9
2-1.0027-3: RNCC: 5 | RNVC: 9
25300052: RNCC: 5 | RNVC: 9

30 Nov 1981

5340-12-344-6916
Access Cover

123446916
13-SK-LT1-20041: RNCC: 3 | RNVC: 2

1 Dec 1997

5340-12-158-0137
Nut And Bolt Locking Plate

121580137
23305-207000.09.0: RNCC: 2 | RNVC: 2
23305-207000.09.0: RNCC: 3 | RNVC: 2
23305-207000-09-0: RNCC: 5 | RNVC: 2
23305-207000-09-0: RNCC: 5 | RNVC: 9
23305-207000.09.0: RNCC: 5 | RNVC: 9
23305-207000.09.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-167-1932
Turnbuckle

121671932
MS-SP8601-M6: RNCC: 3 | RNVC: 2
1918-722006-002: RNCC: 5 | RNVC: 2
1918-722006.002: RNCC: 5 | RNVC: 9
1918-722006-002: RNCC: 5 | RNVC: 9

1 Dec 1976

5340-12-197-3385
Spring Tension Clip

121973385
00-3944: RNCC: 3 | RNVC: 2
EM3988: RNCC: 5 | RNVC: 2
0059881578: RNCC: 5 | RNVC: 2

13 Oct 1983

5340-12-388-1728
Mounting Plate

123881728
F1.1697-00-01-12.00-01: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-12-300-1461
Kunst Gleitschiene

123001461
C249-A34-C29: RNCC: 3 | RNVC: 2

7 Jul 1984

5340-12-327-1531
Retaining Strap

123271531
SPGU6025.160/30SK: RNCC: 3 | RNVC: 2
1816025160: RNCC: 5 | RNVC: 2
1816025160: RNCC: 5 | RNVC: 2

6 Dec 1991

5340-12-327-0434
Catch Strike

123270434
3531 000 1801: RNCC: 3 | RNVC: 2
35310001801: RNCC: 5 | RNVC: 2
161 00 34 0010: RNCC: 5 | RNVC: 9
16100340010: RNCC: 5 | RNVC: 9

25 Nov 1991

5340-12-026-7607

5340-12-094-4297

5340-12-380-4830
Webbing Strap

123804830
P112010NM: RNCC: 3 | RNVC: 2

3 Nov 2009

5340-12-389-7023
Mounting Bracket

123897023
504.168 C: RNCC: 3 | RNVC: 2

15 Aug 2012

5340-12-320-7038
Mending Plate

123207038
CF 324 781 A: RNCC: 2 | RNVC: 2
CF 324 781 A: RNCC: 3 | RNVC: 2
CF 324 781 A: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-392-3145
Webbing Strap

123923145
4100095-982134.000.0: RNCC: 2 | RNVC: 2
4100095-982134.000.0: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-366-1358
Mounting Bracket

123661358
2500267-193230.001.0: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-12-383-8229
Loop Clamp

123838229
DIN3016-1-D1-18X15-W1-2-EPDM: RNCC: 2 | RNVC: 2
06673001826: RNCC: 3 | RNVC: 2
06.67300-1826: RNCC: 5 | RNVC: 2
06.67300-1826: RNCC: 5 | RNVC: 2
05421815: RNCC: 5 | RNVC: 2
06673001826: RNCC: 5 | RNVC: 2

10 Dec 2010

5340-12-342-7145
Mending Plate

123427145
1202 9259: RNCC: 3 | RNVC: 9
12029259EE0111-27: RNCC: 5 | RNVC: 9
3-601-9-473-010-4: RNCC: 5 | RNVC: 9
3.601.9.473.010.4: RNCC: 5 | RNVC: 9

19 Mar 1997

5340-12-701-6562
Mounting Bracket

127016562
VG95211-ML-127016562: RNCC: 2 | RNVC: 2
5.12.7208.3395.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-365-5854
Mounting Bracket

123655854
J29120106-004: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-319-8239
Mounting Plate

123198239
5802006-201900.01: RNCC: 2 | RNVC: 2
5802006-201900.01: RNCC: 3 | RNVC: 2

8 Nov 1989

5340-12-318-5121
Webbing Strap

123185121
5802086-21020: RNCC: 2 | RNVC: 2
5802086-21020: RNCC: 3 | RNVC: 2

21 Jul 1989

5340-12-324-9835
Access Cover

123249835
330708-0101-000: RNCC: 3 | RNVC: 2
330708-0101-000: RNCC: 5 | RNVC: 9

17 Apr 1991

5340-12-178-0456
Loop Clamp

121780456
042-0030-054-020: RNCC: 3 | RNVC: 2
042 000 005 018: RNCC: 3 | RNVC: 2
042000005018: RNCC: 5 | RNVC: 2
0420030054020: RNCC: 5 | RNVC: 2
50156500: RNCC: 5 | RNVC: 2
3136577R1: RNCC: 5 | RNVC: 2
0003382345: RNCC: 5 | RNVC: 2

16 Mar 1979

5340-12-168-5667
Pad Eye

121685667
1000025-230000-13: RNCC: 3 | RNVC: 2
1000025-230000.13: RNCC: 3 | RNVC: 2
1000025-230000-13: RNCC: 5 | RNVC: 9
1000025-230000.13: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-362-2843
Loop Clamp

123622843
LN9490BK80: RNCC: 2 | RNVC: 2

3 Feb 2004

5340-12-358-7865
Runner

123587865
3826160418: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-316-3764
Webbing Strap

123163764
117755: RNCC: 3 | RNVC: 2
1003.03.02.01.09: RNCC: 5 | RNVC: 2

13 Jan 1989

5340-12-349-9869
Liquid Holding Unit Filler Neck

123499869
148 E 398.00-002: RNCC: 3 | RNVC: 2
148-398.00-002: RNCC: 5 | RNVC: 2
148E398.00-002: RNCC: 5 | RNVC: 2

3 Feb 2000

5340-12-175-0998
Dust And Moisture Seal Protective Plug

121750998
11919: RNCC: 3 | RNVC: 2
0009975186: RNCC: 5 | RNVC: 2
02-1669: RNCC: 5 | RNVC: 2
02-1669-2: RNCC: 5 | RNVC: 2
AK11919: RNCC: 5 | RNVC: 2
0590578: RNCC: 5 | RNVC: 2
000 997 51 86: RNCC: 5 | RNVC: 2
590578: RNCC: 5 | RNVC: 9

23 Aug 1978

5340-12-317-8259
Double Angle Bracket

123178259
23290-041000.015: RNCC: 2 | RNVC: 2
23290-041000.015: RNCC: 3 | RNVC: 2
23290-041000.015: RNCC: 5 | RNVC: 9
9858786: RNCC: 5 | RNVC: 9

17 May 1989

5340-12-186-2871
Dust And Moisture Seal Protective Plug

121862871
513419-0105.000: RNCC: 3 | RNVC: 2
513419-0105: RNCC: 5 | RNVC: 2
513419-0105-000: RNCC: 5 | RNVC: 2

13 Dec 1980

5340-12-302-7206
Webbing Strap

123027206
A 1301-2045MM: RNCC: 3 | RNVC: 2

25 Jan 1985

5340-12-177-6152
Flush Catch Claw

121776152
M14L22-1-1BD(99): RNCC: 3 | RNVC: 2
14L5-1AA: RNCC: 5 | RNVC: 2

9 Feb 1979

5340-12-366-9912
Mounting Plate

123669912
HGS525-230/2018-1: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-330-3333
Clamp Bolt Assembly

123303333
707-145 335-000-0: RNCC: 2 | RNVC: 2
707-145 335-000-0: RNCC: 3 | RNVC: 2
707-145 335 000-0: RNCC: 5 | RNVC: 2

3 Dec 1992

5340-12-313-0367
Double Angle Bracket

123130367
P-086150-004: RNCC: 3 | RNVC: 2
P086150-004: RNCC: 5 | RNVC: 2

1 Mar 1988

5340-12-703-2034
Mounting Bracket

127032034
VG95211-ML-127032034: RNCC: 2 | RNVC: 2
5.12.5105.8060.00: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-194-3529
Double Angle Bracket

121943529
72-006-A3: RNCC: 3 | RNVC: 2
4310D00023023: RNCC: 5 | RNVC: 2

26 Oct 1982

5340-12-384-8587
Handwheel

123848587
F1.1189-00-10-10.00-11: RNCC: 3 | RNVC: 2

5 Apr 2011

5340-12-385-5482
Mounting Bracket

123855482
SK1331-657210.000.0: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-12-328-9152
Bow Handle

123289152
2350-021400.000.0: RNCC: 2 | RNVC: 2
2350-021400.000.0: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-701-4206
Loop Clamp

127014206
VG95211-ML-127014206: RNCC: 2 | RNVC: 2
5.12.5312.1000.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-181-6695
Platte

121816695
81-150: RNCC: 3 | RNVC: 2
96-02101-9: RNCC: 5 | RNVC: 2

10 Dec 1979

5340-12-322-0413
Metal Runner

123220413
702-141400-908-0: RNCC: 3 | RNVC: 2

19 Jul 1990

5340-12-383-2596
Access Cover

123832596
4100036-330100.008.0: RNCC: 2 | RNVC: 2
4100036-330100.008.0: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-12-350-0054
Runner

123500054
2500238-162120.007.0: RNCC: 2 | RNVC: 2
2500238-162120.007.0: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-367-3035
Angle Bracket

123673035
5.044-420.0: RNCC: 3 | RNVC: 2

1 Aug 2005

5340-12-317-6453
Dust And Moisture Seal Protective Plug

123176453
VG81299H20,8-RAL7021: RNCC: 2 | RNVC: 2

25 Apr 1989

5340-12-363-5167
Mechanical Stop

123635167
SK796-012050.000.0: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-310-0420
Mending Plate

123100420
2725669: RNCC: 3 | RNVC: 2
272.5669: RNCC: 5 | RNVC: 2

31 Mar 1987

5340-12-313-1978
Nonmetallic Bumper

123131978
272.353.220: RNCC: 3 | RNVC: 2
272.353 220: RNCC: 5 | RNVC: 9

10 Mar 1988

5340-12-314-0426
Mending Plate

123140426
6214290440: RNCC: 3 | RNVC: 2
621 429 04 40: RNCC: 5 | RNVC: 2

1 Jun 1988

5340-12-167-5471
Resilient Mount

121675471
3575057: RNCC: 3 | RNVC: 2
3575057: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-352-9064
Retaining Band

123529064
4374900542: RNCC: 3 | RNVC: 2
437 490 05 42: RNCC: 5 | RNVC: 2

4 Jan 2001

5340-12-197-7378
Butt Hinge Leaf

121977378
P-296878-004: RNCC: 3 | RNVC: 2
P296878-004: RNCC: 5 | RNVC: 2

18 Nov 1983

5340-12-189-7707
Handwheel

121897707
VG85089-A-175X14-RG: RNCC: 2 | RNVC: 2
VG85089-A-175X14-RG: RNCC: 3 | RNVC: 2
VG85089-A-175X14-RG: RNCC: 3 | RNVC: 2
VG85089-A-175X14-RG: RNCC: 3 | RNVC: 9
A175X14VG85089RG5: RNCC: 5 | RNVC: 9
A175X14VG85089-RG5: RNCC: 5 | RNVC: 9
A175X14VG85089GCUSN5ZNPB: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-322-2751
Loop Clamp

123222751
DIN3015-LG-1R-9,5-PP-W1: RNCC: 2 | RNVC: 2
HRL1A1 9,5PP STMZN: RNCC: 3 | RNVC: 2
RAPR16-1 3/8: RNCC: 3 | RNVC: 2
1095A-PP-DP-AS: RNCC: 3 | RNVC: 2
DIN3015-LG1R-9,5-PP-W1: RNCC: 5 | RNVC: 2
RAPR16-1 3/8: RNCC: 5 | RNVC: 2

7 Aug 1990

5340-12-198-0515
Webbing Strap

121980515
080400601-0404-00: RNCC: 2 | RNVC: 2
080400601-0404-00: RNCC: 3 | RNVC: 2
8.03.03.50.3: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-337-2868
Rod End Clevis

123372868
P-896433-403: RNCC: 3 | RNVC: 2
P896433-403: RNCC: 5 | RNVC: 2

13 Feb 1995

5340-12-177-1327
Double Angle Bracket

121771327
5800826-02-017: RNCC: 3 | RNVC: 2
5800826-02.017: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-346-1391
Rod End Connector

123461391
619-45.00.810-05: RNCC: 3 | RNVC: 2

17 Jun 1998

5340-12-174-4871
Angle Bracket

121744871
7882750: RNCC: 3 | RNVC: 2
7882-750: RNCC: 5 | RNVC: 2
1000025-565520: RNCC: 5 | RNVC: 9

3 Jul 1978

5340-12-192-3451
Spring Tension Clip

121923451
2141159: RNCC: 3 | RNVC: 2
N09856: RNCC: 5 | RNVC: 9
LF9826E15: RNCC: 5 | RNVC: 9
9826,14-15: RNCC: 5 | RNVC: 9
FL9826E14-15: RNCC: 5 | RNVC: 9

15 Apr 1982

5340-12-318-1616
Angle Bracket

123181616
R04596-102: RNCC: 3 | RNVC: 2

16 Jun 1989

5340-12-189-1883
Dust And Moisture Seal Protective Plug

121891883
D16S18: RNCC: 3 | RNVC: 2
37 024-006: RNCC: 5 | RNVC: 2
37024-006: RNCC: 5 | RNVC: 2

9 Sep 1981

5340-12-700-2023
Rod End Clevis

127002023
51-261438064: RNCC: 2 | RNVC: 2
765-78-1574: RNCC: 3 | RNVC: 2

5 Nov 1991

5340-12-330-1933
Nonmetallic Bumper

123301933
DIN95364-A13X10-M5X12-NR55ST: RNCC: 2 | RNVC: 2
530000-13X10-M5X12.NR55.ST: RNCC: 5 | RNVC: 2
91002-900176: RNCC: 5 | RNVC: 2
VG95364-A13X10-M5X12-NR55ST: RNCC: 5 | RNVC: 9

12 Nov 1992

5340-12-390-3241
Helical Compression Spring Seat

123903241
E39477: RNCC: 3 | RNVC: 2

30 Oct 2012

5340-12-359-8283
Mounting Bracket

123598283
300.022.236: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-12-350-0755
Rod End Clevis

123500755
113974: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-12-010-2332

5340-12-094-9473

5340-12-041-0460

5340-12-303-9304
Duebel

5340-12-042-5754

5340-12-386-3670
Section Block Clamp

123863670
55589: RNCC: 3 | RNVC: 2
KB55589-500: RNCC: 5 | RNVC: 2

29 Aug 2011

5340-12-183-0751
Dust And Moisture Seal Protective Cap

121830751
250/20: RNCC: 3 | RNVC: 2
GPN250/20: RNCC: 5 | RNVC: 2
2888031EE0693-78: RNCC: 5 | RNVC: 2
0019888235: RNCC: 5 | RNVC: 2
0288 8031: RNCC: 5 | RNVC: 2
2888031: RNCC: 5 | RNVC: 2
20GPN250: RNCC: 5 | RNVC: 9
250-20: RNCC: 5 | RNVC: 9
250020000: RNCC: 5 | RNVC: 9
GPN250-20: RNCC: 5 | RNVC: 9

18 Mar 1980

5340-12-315-4911
Dust And Moisture Seal Protective Cap

123154911
4900153-11161-00-04: RNCC: 3 | RNVC: 2
4900153-11161-04: RNCC: 5 | RNVC: 9

29 Oct 1988

5340-12-351-6312
Cushioning Pad

123516312
232-096754: RNCC: 3 | RNVC: 2
10024125: RNCC: 5 | RNVC: 2

10 Aug 2000

5340-12-175-1194
Dust And Moisture Seal Protective Plug

121751194
4B40140: RNCC: 3 | RNVC: 2
42483120: RNCC: 5 | RNVC: 2
42483120EY5078-28: RNCC: 5 | RNVC: 2

28 Aug 1978

5340-12-360-8375
Mounting Bracket

123608375
5446S/03-012: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-12-184-2310
Spring Tension Clip

121842310
6MBO08 VERZINKT: RNCC: 3 | RNVC: 2
1008000006-023: RNCC: 3 | RNVC: 2
100800000006/024: RNCC: 3 | RNVC: 2
6MBO08 GELBVERZ.: RNCC: 5 | RNVC: 2
N0126452: RNCC: 5 | RNVC: 2
6ESN08VERZINKT: RNCC: 5 | RNVC: 2
6SXN08VERZINKT: RNCC: 5 | RNVC: 2
SL6VERZINKT: RNCC: 5 | RNVC: 2

8 Jul 1980

5340-12-356-5087
Double Angle Bracket

123565087
J92222366-003: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-188-8073
Rod End Clevis

121888073
DIN71752-G5X10-A3P: RNCC: 2 | RNVC: 2
DIN71752-G5X10-9SMN28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G5X10-9SMNPB28K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G5X10-A3P: RNCC: 3 | RNVC: 2
DIN71752-G5X10-A3P: RNCC: 3 | RNVC: 2
100200050010/024: RNCC: 3 | RNVC: 2
G5X10DIN71752: RNCC: 5 | RNVC: 2
DIN71752-G5X10: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-339-7412
Mounting Bracket

123397412
2300202-000300.000: RNCC: 2 | RNVC: 2
2300202-000300.000: RNCC: 3 | RNVC: 2
2300202-000300.000: RNCC: 5 | RNVC: 9

9 Jan 1996

5340-12-173-1663
Extension Drawer Slide Section

121731663
5801113-111110: RNCC: 3 | RNVC: 2

22 Mar 1978

5340-12-307-9406
Mending Plate

123079406
5801434-511000.06: RNCC: 2 | RNVC: 2
7800541006: RNCC: 3 | RNVC: 2
78005 41006: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-327-4347
Mounting Bracket

123274347
1000173-341503.000.0: RNCC: 2 | RNVC: 2
1000173-341503.000.0: RNCC: 3 | RNVC: 2

22 Jan 1992

5340-12-389-4414
Mounting Plate

123894414
1.313-201010.00: RNCC: 2 | RNVC: 2
1.313-201010.00: RNCC: 5 | RNVC: 2

6 Jul 2012

5340-12-328-6493
Filler Opening Cap

123286493
NO PRIMARY REF 12-328-6493: RNCC: 3 | RNVC: 2
0226516: RNCC: 5 | RNVC: 2
01040.00.006: RNCC: 5 | RNVC: 9
01040-00-000: RNCC: 5 | RNVC: 9
01040-00-006: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-12-168-5709
Angle Bracket

121685709
1000025-810300-03: RNCC: 3 | RNVC: 2
1000025-810300.03: RNCC: 3 | RNVC: 2
1000025-810300-03: RNCC: 5 | RNVC: 9
1000025-810300.03: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-169-6721
Detent Plunger

121696721
263A11: RNCC: 3 | RNVC: 2
BK7017: RNCC: 3 | RNVC: 2
81910200416: RNCC: 5 | RNVC: 2
81.91020-0416: RNCC: 5 | RNVC: 2
263A/XI: RNCC: 5 | RNVC: 9
263A11: RNCC: 5 | RNVC: 9
BK7017: RNCC: 5 | RNVC: 9

3 Jun 1977

5340-12-336-1660
Helical Compression Spring Seat

123361660
0212 2788: RNCC: 3 | RNVC: 2
2122788EE0178-17: RNCC: 5 | RNVC: 2
212-2788: RNCC: 5 | RNVC: 9

3 Nov 1994

5340-12-311-4606
Strap Fastener Loop

123114606
DFVLR40-090-13B: RNCC: 3 | RNVC: 2
DFVLR40-090-13B: RNCC: 3 | RNVC: 2

4 Sep 1987

5340-12-359-4345
Loop Clamp

123594345
DIN3016-1-D1-18X20-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-194-0150
Helical Compression Spring Retainer

121940150
20-5660-013: RNCC: 3 | RNVC: 2

23 Sep 1982

5340-12-195-7880
Butt Hinge

121957880
5800.7167: RNCC: 3 | RNVC: 2
5800-7167: RNCC: 5 | RNVC: 2

18 Apr 1983

5340-12-177-6215
Mounting Bracket

121776215
1121-60601.09: RNCC: 3 | RNVC: 2
1121-60601-09: RNCC: 5 | RNVC: 2

9 Feb 1979

5340-12-700-6579
Pawl Fastener

127006579
VG95211-ML-127006579: RNCC: 2 | RNVC: 2
155.6100.7420: RNCC: 3 | RNVC: 2
0501410170589: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-327-7224
Mounting Plate

123277224
5803578-121010.01: RNCC: 2 | RNVC: 2
5803578-121010.01: RNCC: 3 | RNVC: 2

24 Feb 1992

5340-12-701-9911
Loop Clamp

127019911
VG95211-ML-127019911: RNCC: 2 | RNVC: 2
155N464-253: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-177-5223
Angle Bracket

121775223
009-030.190-002: RNCC: 3 | RNVC: 2
12790-134000-002: RNCC: 5 | RNVC: 2
009-030-190-002: RNCC: 5 | RNVC: 9
12790-134000-002: RNCC: 5 | RNVC: 9
12790-134000.002: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-351-2161
Helical Compression Spring Retainer

123512161
3060-00-3191D0.03: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-159-0401
Loop Clamp

121590401
RSGU1.8021-20/20: RNCC: 3 | RNVC: 2
0009953301: RNCC: 5 | RNVC: 2
4218021020: RNCC: 5 | RNVC: 2
RSGU11-8021-20-20: RNCC: 5 | RNVC: 2
RSGU11-021-020-20: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-185-2779
Support Hook

121852779
1393002-11100.03: RNCC: 2 | RNVC: 2
1393002-11100-03: RNCC: 5 | RNVC: 9

25 Sep 1980

5340-12-337-8904
Retaining Strap

123378904
1161020: RNCC: 3 | RNVC: 2
604-10MM: RNCC: 5 | RNVC: 2
62640015: RNCC: 5 | RNVC: 2
1003100: RNCC: 5 | RNVC: 2
604-10: RNCC: 5 | RNVC: 2
2640/015: RNCC: 5 | RNVC: 9

28 Apr 1995

5340-12-189-2020
Access Cover

121892020
332104-1707.000: RNCC: 3 | RNVC: 2
332104-1707: RNCC: 5 | RNVC: 2
332104-1707.000: RNCC: 5 | RNVC: 9
1200032-210000.007: RNCC: 5 | RNVC: 9

10 Sep 1981

5340-12-314-0356
Metallic Bumper

123140356
510252-3406.000: RNCC: 3 | RNVC: 2

1 Jun 1988

5340-12-326-8189
Double Angle Bracket

123268189
9977005-821: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-12-357-3830
Angle Bracket

123573830
160-75077-03: RNCC: 3 | RNVC: 2

14 Jun 2002

5340-12-301-2716
Helical Compression Spring Seat

123012716
062904-200.22.10.00: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-12-161-6972
Snap Hook

121616972
02925H: RNCC: 3 | RNVC: 2
X00535: RNCC: 5 | RNVC: 2
029 25H: RNCC: 5 | RNVC: 9
02925C: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-379-9491
Mounting Bracket

123799491
1558319: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-135-7287

5340-12-159-0264
Angle Bracket

121590264
8381593840: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-701-3013
Mounting Bracket

127013013
VG95211-ML-127013013: RNCC: 2 | RNVC: 2
5.12.5101.5030.04: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-6757
Mounting Bracket

123596757
2500261-187970.001.0: RNCC: 2 | RNVC: 2
2500261-187970.001.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-344-8967
Mounting Bracket

123448967
5803644-206110.00: RNCC: 2 | RNVC: 2
55.0209.131.00: RNCC: 3 | RNVC: 2
5803644-206110.00: RNCC: 5 | RNVC: 9

8 Jan 1998

5340-12-305-0195
Webbing Strap

123050195
79014/021-1200-420: RNCC: 3 | RNVC: 2
79014/021-1200-0420: RNCC: 5 | RNVC: 2

17 Sep 1985

5340-12-702-4797
Mounting Bracket

127024797
VG95211-ML-127024797: RNCC: 2 | RNVC: 2
5.51.0607.0002.01: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-9693
Loop Clamp

127019693
VG95211-ML-127019693: RNCC: 2 | RNVC: 2
01.7702.5104.3: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-3245
Rod End Connector

127013245
VG95211-ML-127013245: RNCC: 2 | RNVC: 2
5.12.5101.8310.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7289
Mounting Bracket

127017289
VG95211-ML-127017289: RNCC: 2 | RNVC: 2
5.12.7607.0410.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-151-5336
Dust And Moisture Seal Protective Cap

121515336
27-17-00027: RNCC: 3 | RNVC: 2
5M7730-930-03: RNCC: 5 | RNVC: 2
1350T9: RNCC: 5 | RNVC: 9
1350T9: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-347-3249
Spacing Threaded Standoff

123473249
2300147-060000.012.0: RNCC: 2 | RNVC: 2
7960677-100301.000.0: RNCC: 3 | RNVC: 2

26 Nov 1998

5340-12-145-0512
Rod End Clevis

121450512
1212 6194: RNCC: 3 | RNVC: 2
12126194: RNCC: 5 | RNVC: 2
31.6860-45.4: RNCC: 5 | RNVC: 2
31-6860-45-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-381-1349
Snap Hook

123811349
6.375-565.0: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-12-308-2923
Mending Plate

123082923
P-875510-009: RNCC: 3 | RNVC: 2
P875510-009: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-701-9192
Loop Clamp

127019192
T-11-80-15-12CH18N10T CHIM.PAS.-: RNCC: 3 | RNVC: 1

6 Feb 1995

5340-12-343-9654
Nonmetallic Bumper

123439654
136-041.00-050: RNCC: 3 | RNVC: 2
136 E 041.00-50: RNCC: 5 | RNVC: 2

20 Aug 1997

5340-12-334-4321
T Bracket

123344321
6700018-201220.04: RNCC: 2 | RNVC: 2
6700018-201220.04: RNCC: 3 | RNVC: 2

6 May 1994

5340-12-191-6425
Metal Runner

121916425
1.019.500.7: RNCC: 3 | RNVC: 2
1-019-500-7: RNCC: 5 | RNVC: 9

17 Feb 1982

5340-12-310-1585
Friction Catch Stud Receptacle

123101585
562K2325-007-00,4: RNCC: 3 | RNVC: 2
0008111240: RNCC: 5 | RNVC: 2
00081112407101: RNCC: 5 | RNVC: 2

13 Apr 1987

5340-12-359-9371
Nonmetallic Bumper

123599371
2500261-182600.007.0: RNCC: 2 | RNVC: 2
2500261-182600.007.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-182-5183
Retaining Strap

121825183
PAN6483AN: RNCC: 3 | RNVC: 2

8 Feb 1980

5340-12-181-2025
Butt Hinge

121812025
81972012161: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-12-307-6838
Electrical-Mechanical Equipment Post

123076838
107742: RNCC: 3 | RNVC: 2

16 Jul 1986

5340-12-388-9623
Mortise Lock

123889623
235-9402: RNCC: 3 | RNVC: 2

10 May 2012

5340-12-301-7293
Electrical-Mechanical Equipment Post

123017293
43712110-601: RNCC: 2 | RNVC: 2
43712110-601: RNCC: 3 | RNVC: 2
43712110-601: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-324-4442
Cane Bolt

123244442
718040902: RNCC: 3 | RNVC: 2

18 Feb 1991

5340-12-347-6999
Mounting Bracket

123476999
5801215-62: RNCC: 2 | RNVC: 2
5801215-62: RNCC: 3 | RNVC: 2

29 Jan 1999

5340-12-173-6610
Loop Clamp

121736610
3609950201: RNCC: 3 | RNVC: 2

28 Apr 1978

5340-12-313-1920
Angle Bracket

123131920
4312 711 32620: RNCC: 3 | RNVC: 2
4900214-101600: RNCC: 5 | RNVC: 2
4900214-101600: RNCC: 5 | RNVC: 9

10 Mar 1988

5340-12-372-9270
Protection Bellows

123729270
NO PRIMARY REF 12-372-9270: RNCC: 3 | RNVC: 2
7085523: RNCC: 5 | RNVC: 2

7 Sep 2007

5340-12-350-5921
Access Cover

123505921
160-31032-01: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-317-3195
Angle Bracket

123173195
4900064-4121.009: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-353-4559
Multiple Angle Bracket

123534559
S27013/01-4-1-6: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-12-143-4171
Double Angle Bracket

121434171
TWH01-418: RNCC: 3 | RNVC: 2
TWH01-418: RNCC: 5 | RNVC: 2
TWH01-418: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-356-5236
Mounting Bracket

123565236
11.44086-0650: RNCC: 3 | RNVC: 2
11.44000-2610POS175: RNCC: 5 | RNVC: 2

7 Mar 2002

5340-12-350-1100
Loop Clamp

123501100
211-15200: RNCC: 3 | RNVC: 2
20C: RNCC: 5 | RNVC: 2

16 Feb 2000

5340-12-183-7572
Detent Plunger

121837572
12746-008-01: RNCC: 3 | RNVC: 2

20 May 1980

5340-12-386-0930
Expansion Shield

123860930
NO PRIMARY REF 12-386-0930: RNCC: 3 | RNVC: 2
050235: RNCC: 5 | RNVC: 2
O50235: RNCC: 5 | RNVC: 2
2500599995: RNCC: 5 | RNVC: 2

8 Aug 2011

5340-12-338-0146
Runner

123380146
C119-A31-B218: RNCC: 3 | RNVC: 2

11 May 1995

5340-12-332-9449
Mounting Plate

123329449
702-464030-901-0: RNCC: 3 | RNVC: 2

8 Oct 1993

5340-12-332-8440
Helical Compression Spring Seat

123328440
3312-0025-56995: RNCC: 3 | RNVC: 2

27 Sep 1993

5340-12-703-3233
Mounting Bracket

127033233
VG95211-ML-127033233: RNCC: 2 | RNVC: 2
5.12.6501.8380.03: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-199-1485
Bow Handle

121991485
72L18-2-2AB: RNCC: 3 | RNVC: 2
61E22-2A: RNCC: 5 | RNVC: 2

29 Mar 1984

5340-12-354-9040
Webbing Strap

123549040
6.373-544.0: RNCC: 3 | RNVC: 2

4 Sep 2001

5340-12-328-4370
Nonmetallic Bumper

123284370
4617430405: RNCC: 3 | RNVC: 2

19 May 1992

5340-12-702-8835
Dashpot

127028835
50-67800010005: RNCC: 2 | RNVC: 2

17 Jan 1996

5340-12-330-3082
Pawl Fastener

123303082
2653-991900.08: RNCC: 2 | RNVC: 2
2653-991900.08: RNCC: 3 | RNVC: 2
2653-991900.08: RNCC: 5 | RNVC: 2

1 Dec 1992

5340-12-311-2492
Dust And Moisture Seal Protective Cap-Plug

123112492
610U32: RNCC: 3 | RNVC: 2
610003200: RNCC: 5 | RNVC: 9
GPN610,U32: RNCC: 5 | RNVC: 9

10 Aug 1987

5340-12-332-3260
Strap Fastener Loop

123323260
71021: RNCC: 3 | RNVC: 2

29 Jul 1993

5340-12-360-0457
Mounting Bracket

123600457
9416800414: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-364-9561
Mounting Bracket

123649561
4373500042: RNCC: 3 | RNVC: 2
437 350 00 42: RNCC: 5 | RNVC: 2

18 Nov 2004

5340-12-011-5310

5340-12-042-0672

5340-12-145-6926

5340-12-326-1334
Butt Hinge

123261334
307.601-60416.12: RNCC: 3 | RNVC: 2

12 Aug 1991

5340-12-142-7914
Federkraft- Klipp

5340-12-141-5290
Blatt- Feder

5340-12-143-7734
Zylinde Befestiger

5340-12-702-3693
Retaining Bail

127023693
VG95211-ML-127023693: RNCC: 2 | RNVC: 2
5.12.0602.2130.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-354-5644
Multiple Angle Bracket

123545644
4900059-221459.000.0/1: RNCC: 2 | RNVC: 2
4900059-221459.000.0/1: RNCC: 3 | RNVC: 2

3 Aug 2001

5340-12-702-5465
Mounting Bracket

127025465
VG95211-ML-127025465: RNCC: 2 | RNVC: 2
5.51.7211.0060.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-198-7724
Rod End Clevis

121987724
2500138-180300.02: RNCC: 2 | RNVC: 2
2500138-180300.02: RNCC: 3 | RNVC: 2
2500138-180300.02: RNCC: 5 | RNVC: 9

24 Feb 1984

5340-12-178-3193
Retaining Strap

121783193
5800878-511.001: RNCC: 3 | RNVC: 2
5800878-511-001: RNCC: 5 | RNVC: 9

12 Apr 1979

5340-12-319-7389
Nonmetallic Bumper

123197389
160-72698-02: RNCC: 3 | RNVC: 2
15160-72698.02: RNCC: 5 | RNVC: 2
160-72698-02: RNCC: 5 | RNVC: 9

30 Oct 1989

5340-12-308-6083
Shimmy Damper

123086083
073970: RNCC: 3 | RNVC: 2
03 01 0816 15 080: RNCC: 5 | RNVC: 2
03-08-080-103/0300N: RNCC: 5 | RNVC: 2
03-08-080-103-0300: RNCC: 5 | RNVC: 2
03-08-080-103-0300N: RNCC: 5 | RNVC: 2

28 Oct 1986

5340-12-341-5447
Mounting Bracket

123415447
2500255-320000.06.0: RNCC: 2 | RNVC: 2
2500255-320000-06-0: RNCC: 3 | RNVC: 2
2500255-320000.06.0: RNCC: 3 | RNVC: 2

18 Sep 1996

5340-12-390-0617
Loop Clamp

123900617
DIN3016-1-D1-42X20-W5-CR: RNCC: 2 | RNVC: 2

28 Sep 2012

5340-12-358-2035
Butt Hinge Leaf

123582035
2500262-193000.001.0: RNCC: 2 | RNVC: 2
2500262-193000.001.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-167-1455
Spring Tension Clip

121671455
6420-408-017-5: RNCC: 3 | RNVC: 2
583-18: RNCC: 5 | RNVC: 2

25 Nov 1976

5340-12-301-6755
Pipe Bracket

123016755
4173966: RNCC: 3 | RNVC: 2
AS12.E15-17.54: RNCC: 5 | RNVC: 2

1 Nov 1984

5340-12-374-7158
Angle Bracket

123747158
2300499-207000.10.0: RNCC: 2 | RNVC: 2
2300499-207000.10.0: RNCC: 3 | RNVC: 2

11 Mar 2008

5340-12-143-0083
Loop Clamp

121430083
DIN3016-1-B2-10-8X15-W1-2: RNCC: 2 | RNVC: 2
RS0.10-8/15: RNCC: 3 | RNVC: 2
DIN3016-B2-10-8X15-W1-2: RNCC: 3 | RNVC: 2
RS10-8/15: RNCC: 5 | RNVC: 2
4207010010: RNCC: 5 | RNVC: 2
RS10-8-15: RNCC: 5 | RNVC: 2
DIN3016-B2-10-8X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-360-6859
Mounting Plate

123606859
1873-090000.005.0: RNCC: 3 | RNVC: 2

30 Jun 2003

5340-12-353-9324
Section Block Clamp

123539324
J29120246-001: RNCC: 3 | RNVC: 2

21 May 2001

5340-12-180-6017
Dust And Moisture Seal Protective Cap

121806017
250/24: RNCC: 3 | RNVC: 2
GPN250/24: RNCC: 5 | RNVC: 2
GPN250-24: RNCC: 5 | RNVC: 9
250-24: RNCC: 5 | RNVC: 9
24GPN250: RNCC: 5 | RNVC: 9
250024000: RNCC: 5 | RNVC: 9
250-24GPN250: RNCC: 5 | RNVC: 9

21 Sep 1979

5340-12-368-9865
Dust And Moisture Seal Protective Cover

123689865
T18-0005-001: RNCC: 3 | RNVC: 2

10 May 2006

5340-12-370-1769
Manual Control Lever

123701769
486375: RNCC: 3 | RNVC: 2
SG-TPE/RS1: RNCC: 5 | RNVC: 2

27 Sep 2006

5340-12-180-4573
Plain Solid Disk

121804573
C247-A10-C13: RNCC: 2 | RNVC: 2
C247A10C13: RNCC: 3 | RNVC: 2
C247-A10-C13: RNCC: 5 | RNVC: 2
C247-A10-C13: RNCC: 5 | RNVC: 2
C247A10C13: RNCC: 5 | RNVC: 2

12 Sep 1979

5340-12-353-9923
Rod End Clevis

123539923
AFG072343-01: RNCC: 3 | RNVC: 2

28 May 2001

5340-12-368-0731
Mounting Bracket

123680731
ED88-0600-00202-049: RNCC: 2 | RNVC: 2
ED88-0600-00202-049: RNCC: 3 | RNVC: 2

1 Dec 2005

5340-12-362-6796
Mounting Bracket

123626796
215364: RNCC: 3 | RNVC: 2
93112-320.05: RNCC: 5 | RNVC: 2

18 Mar 2004

5340-12-192-9013
Handwheel

121929013
NO PRIMARY REF 12-192-9013: RNCC: 3 | RNVC: 2
63X7VG85085: RNCC: 5 | RNVC: 9
VG85085-63X7: RNCC: 5 | RNVC: 9

3 Jun 1982

5340-12-336-9904
Mending Plate

123369904
4900008-51102.003: RNCC: 3 | RNVC: 2
4900008-51102 003: RNCC: 5 | RNVC: 9
F300 0T 012 9610: RNCC: 6 | RNVC: 9

5 Jan 1995

5340-12-192-3418
Retaining Strap

121923418
VG95933AR-15-W1-BK-11MM BOHRUNG: RNCC: 2 | RNVC: 2
1/1D11-15MMN325: RNCC: 3 | RNVC: 2
MMN325-1-1D11-15: RNCC: 5 | RNVC: 2
1-1D11-15MMN325: RNCC: 5 | RNVC: 2
MMN325-1-1D11-15: RNCC: 5 | RNVC: 2
700325 015110: RNCC: 5 | RNVC: 9

15 Apr 1982

5340-12-372-1896
Dust And Moisture Seal Protective Plug

123721896
S288M3010210: RNCC: 2 | RNVC: 2
S288M3010210: RNCC: 3 | RNVC: 2

26 Jun 2007

5340-12-372-4525
Access Cover

123724525
11250848203: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-12-307-9138
Sealing Plug Assembly

123079138
326011153: RNCC: 3 | RNVC: 2
326 0111 53: RNCC: 5 | RNVC: 2
326011153: RNCC: 5 | RNVC: 9

8 Aug 1986

5340-12-311-5783
Door Handle

123115783
100000107: RNCC: 2 | RNVC: 2
10 0000 107: RNCC: 3 | RNVC: 2
100000107: RNCC: 3 | RNVC: 2

21 Sep 1987

5340-12-338-6697
Spring Tension Clip

123386697
10325701: RNCC: 3 | RNVC: 2

14 Aug 1995

5340-12-319-9087
Access Door

123199087
1229-311: RNCC: 2 | RNVC: 2
533221-8107.000: RNCC: 3 | RNVC: 2
533221-8107.000: RNCC: 5 | RNVC: 9

16 Nov 1989

5340-12-349-1912
Metal Grille

123491912
9005570 072: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-352-2169
Mounting Plate

123522169
J92228321-001: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-337-3463
Snap Hook

123373463
DIN5299-E100-ZN: RNCC: 2 | RNVC: 2
06231904509: RNCC: 3 | RNVC: 2
06.23190-4509: RNCC: 5 | RNVC: 2

17 Feb 1995

5340-12-365-6298
Section Block Clamp

123656298
J29120300-001: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-391-0009
Kugelgel Spannfusz

123910009
GN244-125-M20-136-AG: RNCC: 3 | RNVC: 2

14 Jan 2013

5340-12-151-9535
Loop Clamp

121519535
0-105-10: RNCC: 3 | RNVC: 2
2695125: RNCC: 5 | RNVC: 2
4068115014: RNCC: 5 | RNVC: 2
2695-125: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-353-0869
Mounting Bracket

123530869
529-120802.00.0: RNCC: 3 | RNVC: 2
1111106: RNCC: 5 | RNVC: 2

25 Jan 2001

5340-12-354-3436
Angle Bracket

123543436
J27420228-001: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-12-343-1443
Mounting Bracket

123431443
2654-331000.13: RNCC: 2 | RNVC: 2
2654-331000.13: RNCC: 3 | RNVC: 2
2654-331000.13: RNCC: 5 | RNVC: 9
2654-331 000.13: RNCC: 5 | RNVC: 9
2654-331 000.13: RNCC: 5 | RNVC: 9
2654-331 000.13: RNCC: 5 | RNVC: 9

9 May 1997

5340-12-392-4125
Bumper

123924125
I003862: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-12-377-1592
Mounting Bracket

123771592
41288113: RNCC: 3 | RNVC: 2

15 Dec 2008

5340-12-325-5140
Dashpot

123255140
140944: RNCC: 3 | RNVC: 9

12 Jun 1991

5340-12-359-3576
Rim Lock Set

123593576
51252307617: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-355-1541
Mounting Bracket

123551541
1603295-3300: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-12-313-3200
Nonmetallic Bumper

123133200
297709: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-12-386-4590
Threaded Rod End

123864590
333011-2110.000: RNCC: 3 | RNVC: 2

2 Sep 2011

5340-12-393-4571
Butt Hinge Leaf

123934571
160-72087-01: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-12-393-5200
Angle Bracket

123935200
11.29225-0046: RNCC: 3 | RNVC: 2
11.29225-0046: RNCC: 5 | RNVC: 2

20 Sep 2013

5340-12-311-6189
Rod End Clevis

123116189
P-244707-723: RNCC: 3 | RNVC: 2
P244707-723: RNCC: 5 | RNVC: 2

28 Sep 1987

5340-12-173-4508
Spring Loaded Cylinder Fastener

121734508
BK7001: RNCC: 3 | RNVC: 2
1193-07.00: RNCC: 3 | RNVC: 2
1193-07-00: RNCC: 5 | RNVC: 2
BK7001: RNCC: 5 | RNVC: 9

18 Apr 1978

5340-12-701-7460
Angle Bracket

127017460
VG95211-ML-127017460: RNCC: 2 | RNVC: 2
5.12.7614.8360.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-090-5216

5340-12-357-7054
Angle Bracket

123577054
424407: RNCC: 3 | RNVC: 2
0005220040: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-357-7836
Cushioning Pad

123577836
C2203125: RNCC: 3 | RNVC: 2

23 Jul 2002

5340-12-357-6105
Nonmetallic Bumper

123576105
CBD45331P10: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-176-3582
Bridge Clamp

121763582
23302-182110.12: RNCC: 2 | RNVC: 2
2651314: RNCC: 3 | RNVC: 2
2651-314: RNCC: 5 | RNVC: 2

27 Nov 1978

5340-12-365-5803
Double Angle Bracket

123655803
J24221005-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-343-1513
Shock Mount Pad

123431513
5080-247: RNCC: 3 | RNVC: 2

9 May 1997

5340-12-380-1494
Lock-Release Lever

123801494
GN300.4-92-M10-29-SW: RNCC: 3 | RNVC: 2

1 Oct 2009

5340-12-164-1572
Helical Compression Spring Retainer

121641572
V22.228.536000-10: RNCC: 3 | RNVC: 2
V2-228-536000-10: RNCC: 5 | RNVC: 2
V2.228.536000-10: RNCC: 5 | RNVC: 2
V22-228-536000-10EZ4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-357-7076
Manual Control Handle

123577076
0009182160: RNCC: 3 | RNVC: 2
27409-01: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-196-8073
Access Cover

121968073
001-269.016-002: RNCC: 3 | RNVC: 2
1269-16.2: RNCC: 5 | RNVC: 9

18 Aug 1983

5340-12-701-2159
Mounting Bracket

127012159
VG95211-ML-127012159: RNCC: 2 | RNVC: 2
5.12.0605.0505.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-373-6971
Spring Tension Clip

123736971
5.037-117.0: RNCC: 3 | RNVC: 2
5.037-117: RNCC: 5 | RNVC: 9

28 Nov 2007

5340-12-192-8434
Electrical-Mechanical Equipment Post

121928434
1545630: RNCC: 3 | RNVC: 2
HA104/622-1: RNCC: 5 | RNVC: 2
154.5630: RNCC: 5 | RNVC: 2

27 May 1982

5340-12-332-7828
Webbing Strap

123327828
01155-2-SCHLAUFE-FE650-LE650: RNCC: 3 | RNVC: 2
01155-2-SCHLAUFE-FE650MM-LE650MM: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-1 300-650: RNCC: 3 | RNVC: 2
01155-2 FE=650 LE=650: RNCC: 5 | RNVC: 2
DIN60060-2-25X650X650-C3/SCHLAUF: RNCC: 5 | RNVC: 9

17 Sep 1993

5340-12-162-2325
Halter

121622325
100330-2640.00: RNCC: 2 | RNVC: 2
100330-2640.00: RNCC: 3 | RNVC: 2
100330-2640-00: RNCC: 5 | RNVC: 9
100330-2640.00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-314-6885
Loop Clamp

123146885
DIN3015-LA2R-15 UND LH2R-15PPW1K: RNCC: 2 | RNVC: 2
1XRAPR3-215 UND 1XRAPR18-215: RNCC: 3 | RNVC: 2
1740041: RNCC: 5 | RNVC: 2
1XRAPR3-215 UND 1XRAPR18-215: RNCC: 5 | RNVC: 2

29 Jul 1988

5340-12-321-9398
Catch Strike

123219398
V917L01-1X1AG: RNCC: 3 | RNVC: 2
5L.3741.008.91: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-12-176-6266
Angle Bracket

121766266
5800822-01-006: RNCC: 3 | RNVC: 2
5800822-01.006: RNCC: 5 | RNVC: 2

11 Dec 1978

5340-12-380-2825
Mounting Bracket

123802825
2599-24000: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-12-158-0889
Webbing Strap

121580889
V22.288007.4000-00: RNCC: 3 | RNVC: 2
V22-288007-4000-00ZG: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-365-5791
Mounting Bracket

123655791
J53231713-001: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-314-5182
Access Cover

123145182
S03-162000.26: RNCC: 3 | RNVC: 2

15 Jul 1988

5340-12-349-7067
Mounting Bracket

123497067
S46999-M9-S5: RNCC: 3 | RNVC: 2

27 Dec 1999

5340-12-302-8684
Webbing Strap

123028684
6600117-132000.00: RNCC: 2 | RNVC: 2
6600117-132000.00: RNCC: 5 | RNVC: 9

5 Feb 1985

5340-12-198-8219
Angle Bracket

121988219
5801998-221000.00: RNCC: 2 | RNVC: 2
5801998-221000.00: RNCC: 3 | RNVC: 2

28 Feb 1984

5340-12-374-3472
Loop Clamp

123743472
5325174: RNCC: 3 | RNVC: 2

11 Feb 2008

5340-12-375-5158
Liquid Holding Unit Filler Neck

123755158
00008905004: RNCC: 3 | RNVC: 2

10 Jun 2008

5340-12-043-3020

5340-12-335-6651
Strap Fastener Loop

123356651
812/37MM: RNCC: 3 | RNVC: 2
812/37: RNCC: 5 | RNVC: 2

9 Sep 1994

5340-12-312-4147
Webbing Strap

123124147
5801698-2420.00: RNCC: 2 | RNVC: 2
5801698-2420.00: RNCC: 3 | RNVC: 2
5801698-2420.00: RNCC: 5 | RNVC: 9
000-D3-30X2,0X1500-PE-RAL6031: RNCC: 6 | RNVC: 9

30 Dec 1987

5340-12-318-3921
Shimmy Damper

123183921
084492: RNCC: 3 | RNVC: 2
097-719-1600: RNCC: 5 | RNVC: 2

10 Jul 1989

5340-12-343-1506
Access Door

123431506
5080-205: RNCC: 3 | RNVC: 2

9 May 1997

5340-12-342-6180
Mounting Bracket

123426180
U100-3445-100: RNCC: 2 | RNVC: 2
U100-3445-100: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-338-8010
Mending Plate

123388010
6700017-203800.01: RNCC: 2 | RNVC: 2
6700017-203800.01: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-367-0125
Mounting Bracket

123670125
944154077: RNCC: 3 | RNVC: 2
1300-520.00.03.005-000: RNCC: 5 | RNVC: 2

29 Jun 2005

5340-12-161-8162
Butt Hinge Leaf

121618162
81626900040: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-338-0602
Mounting Bracket

123380602
CF 446 816: RNCC: 3 | RNVC: 2
CF 446 816: RNCC: 3 | RNVC: 2

17 May 1995

5340-12-179-7240
Webbing Strap

121797240
72570104: RNCC: 3 | RNVC: 2
72782835: RNCC: 5 | RNVC: 2

23 Jul 1979

5340-12-333-5146
Spring Tension Clip

123335146
0029886678: RNCC: 3 | RNVC: 2

28 Dec 1993

5340-12-303-5784
Retaining Strap

123035784
52.0261.600.03: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-319-9112
Mounting Bracket

123199112
503780: RNCC: 3 | RNVC: 2

16 Nov 1989

5340-12-130-4123
Nonmetallic Bumper

121304123
VG95092B50X40X30-PUR60: RNCC: 2 | RNVC: 2
VG95092B50X40X30-PUR60: RNCC: 3 | RNVC: 2
11614581: RNCC: 5 | RNVC: 9
614581: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-373-2108
Nonmetallic Bumper

123732108
EE-M0058-12: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-12-315-5998
Retaining Strap

123155998
DIN3016-1-F1-53X25-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-53X25-W5: RNCC: 3 | RNVC: 2
RSGU2.53/25-W5: RNCC: 3 | RNVC: 2
67210350: RNCC: 5 | RNVC: 2
DIN3016-F1-53X25-W5: RNCC: 5 | RNVC: 9
VG95931F53X25W5: RNCC: 5 | RNVC: 9

11 Nov 1988

5340-12-305-7023
Electronic Equipment Hardware Kit

123057023
5802017-600251.00: RNCC: 2 | RNVC: 2
6-01.008: RNCC: 3 | RNVC: 2
5802017-600251.00: RNCC: 3 | RNVC: 2
5802017-600251.00: RNCC: 3 | RNVC: 2
5802017-600251.00: RNCC: 5 | RNVC: 2
5802017-600251.00: RNCC: 5 | RNVC: 9

5 Dec 1985

5340-12-362-0101
Angle Bracket

123620101
70-000-226: RNCC: 3 | RNVC: 2

16 Dec 2003

5340-12-157-4504
Spring Tension Clip

121574504
51-7003-013-00: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-161-5782
Access Cover

121615782
100332-10400.03: RNCC: 2 | RNVC: 2
100332-10400-03: RNCC: 5 | RNVC: 2
100332-10400.03: RNCC: 5 | RNVC: 2
100332-10400-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-1840
Angle Bracket

127021840
VG95211-ML-127021840: RNCC: 2 | RNVC: 2
30.7206.1150: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-166-8527
Spring Tension Clip

121668527
66-3524-100-08A001: RNCC: 3 | RNVC: 2

23 Oct 1976

5340-12-335-8736
Dust And Moisture Seal Protective Cap

123358736
0501 300 953: RNCC: 3 | RNVC: 2
1219-002: RNCC: 5 | RNVC: 2
4166543: RNCC: 5 | RNVC: 2
0501300953: RNCC: 5 | RNVC: 9

27 Sep 1994

5340-12-386-1847
Vent Plug

123861847
EWLS/M25X1,5MG: RNCC: 3 | RNVC: 2

15 Aug 2011

5340-12-182-8913
Spring Tension Clip

121828913
BD4007T230: RNCC: 3 | RNVC: 2
BD4007T230: RNCC: 3 | RNVC: 9

4 Mar 1980

5340-12-129-4963
Loop Clamp

121294963
4049950044: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-390-0465
Electronic Equipment Hardware Kit

123900465
105-880347: RNCC: 3 | RNVC: 2

27 Sep 2012

Load More Results