What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 20 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 20 of 178

5340-12-392-6037
Spring Tension Clip

123926037
M2807001120000: RNCC: 3 | RNVC: 2

21 Jun 2013

5340-12-311-7468
Dust And Moisture Seal Protective Plug

123117468
700M36X2: RNCC: 3 | RNVC: 2
GPN700,AM36X2: RNCC: 5 | RNVC: 2
779008477: RNCC: 5 | RNVC: 2
GPN700,M36X2 F.A.: RNCC: 5 | RNVC: 9
700362000: RNCC: 5 | RNVC: 9
GPN700,M36X2 FORM A: RNCC: 5 | RNVC: 9

14 Oct 1987

5340-12-360-0196
Catch Strike

123600196
999999 01633 4 0040: RNCC: 3 | RNVC: 2
88.8281.5318: RNCC: 5 | RNVC: 2

28 Mar 2003

5340-12-375-7686
Mounting Plate

123757686
529-940100.00.0: RNCC: 2 | RNVC: 2
529-940100.00.0: RNCC: 3 | RNVC: 2
1541226: RNCC: 5 | RNVC: 2

3 Jul 2008

5340-12-346-6596
Mounting Bracket

123466596
2300348-970478.000.0: RNCC: 2 | RNVC: 2
2300348-970478.000.0: RNCC: 3 | RNVC: 2
1590974: RNCC: 5 | RNVC: 2

21 Aug 1998

5340-12-365-7615
Clamping Catch

123657615
E2.46.00.08/6: RNCC: 3 | RNVC: 2

1 Feb 2005

5340-12-170-5259
Loop Clamp

121705259
JJ46375: RNCC: 3 | RNVC: 2

20 Jul 1977

5340-12-178-9099
Loop Clamp

121789099
5561898: RNCC: 3 | RNVC: 2
5561898/4: RNCC: 5 | RNVC: 2
5561898-4: RNCC: 5 | RNVC: 9

25 May 1979

5340-12-193-7239
Webbing Strap

121937239
8-4136-00: RNCC: 2 | RNVC: 2
8-4136.00: RNCC: 2 | RNVC: 2
8-4136-00: RNCC: 3 | RNVC: 2
8-4136-00: RNCC: 5 | RNVC: 9
000-D6-25X2,3X300-BW-RAL6031: RNCC: 6 | RNVC: 9

25 Aug 1982

5340-12-148-9660
Loop Clamp

121489660
DIN3016-1-A2-10-10-10X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A2-10-10-10X15-W1-2: RNCC: 3 | RNVC: 2
RS1.3X10/15: RNCC: 3 | RNVC: 2
4217315010: RNCC: 5 | RNVC: 2
RS1100.3X10/15: RNCC: 5 | RNVC: 2
23176-208000-95-0: RNCC: 5 | RNVC: 2
RS1100-3X10-15: RNCC: 5 | RNVC: 2
DIN3016-A2-10-10-10X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-195-0056
Loop Clamp

121950056
DIN3016-1-B1-6X15-W1-2: RNCC: 2 | RNVC: 2
RS0.6/15: RNCC: 3 | RNVC: 2
DIN3016-B1-6X15-W1-2: RNCC: 3 | RNVC: 2
RS6/15: RNCC: 5 | RNVC: 2
RS6-15: RNCC: 5 | RNVC: 2
4100015006: RNCC: 5 | RNVC: 2
DIN3016-B1-6X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-B6X15-W1: RNCC: 5 | RNVC: 9

29 Dec 1982

5340-12-304-2566
Webbing Strap

123042566
5802079-610: RNCC: 2 | RNVC: 2
5802079-610: RNCC: 3 | RNVC: 2
5802079-610: RNCC: 5 | RNVC: 9
000-E3-25X2,0X500-PE-RAL6031: RNCC: 6 | RNVC: 9

3 Jul 1985

5340-12-176-2778
Webbing Strap

121762778
23111-4214.00: RNCC: 2 | RNVC: 2
23111-4214-00: RNCC: 5 | RNVC: 2
23111-4214-00: RNCC: 5 | RNVC: 9
23111-4214-00: RNCC: 5 | RNVC: 9
000-B2-25X2,5X480-BW-RAL6031: RNCC: 6 | RNVC: 9

23 Nov 1978

5340-12-307-6744
Mending Plate

123076744
537177-0240.000: RNCC: 3 | RNVC: 2
537177-0240: RNCC: 5 | RNVC: 9
537177-0240.000: RNCC: 5 | RNVC: 9

16 Jul 1986

5340-12-344-8261
Mending Plate

123448261
81.90750-0490: RNCC: 3 | RNVC: 2
81907500490: RNCC: 5 | RNVC: 9

15 Dec 1997

5340-12-376-0507
Swivel Caster

123760507
LP/PO/200/KDS: RNCC: 3 | RNVC: 2

6 Aug 2008

5340-12-348-8859
Mounting Bracket

123488859
245/7346-46-13-00: RNCC: 3 | RNVC: 2

31 Aug 1999

5340-12-192-2408
Angle Bracket

121922408
4543999: RNCC: 3 | RNVC: 2
454.3999: RNCC: 5 | RNVC: 2
5801602-010109: RNCC: 5 | RNVC: 9

5 Apr 1982

5340-12-338-1071
Catch Strike

123381071
D13-00-G-1.4301: RNCC: 3 | RNVC: 2
D13-00-G1.4301: RNCC: 5 | RNVC: 2
DIN3133-K13X30BK: RNCC: 5 | RNVC: 2

23 May 1995

5340-12-341-8356
Mending Plate

123418356
DIN3015-L-AP-K-6-W1: RNCC: 2 | RNVC: 2
HRL6AP-M-ST-ZN: RNCC: 3 | RNVC: 2
APK-A6: RNCC: 3 | RNVC: 2
SP 6: RNCC: 3 | RNVC: 2
APK-A6: RNCC: 5 | RNVC: 2

1 Nov 1996

5340-12-320-9994
Support Hook

123209994
2300269-180520.001.0: RNCC: 2 | RNVC: 2
790-14.20.111-25: RNCC: 3 | RNVC: 2

15 Mar 1990

5340-12-312-2006
Escutcheon Plate

123122006
590K0002-015-00.4: RNCC: 3 | RNVC: 2

2 Dec 1987

5340-12-155-0721
Friction Catch

121550721
265358: RNCC: 3 | RNVC: 2
235-0-14: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-152-4563
Retaining Strap

121524563
115-03587-4: RNCC: 3 | RNVC: 9
4-7822-824: RNCC: 5 | RNVC: 9
1092105-0100-019: RNCC: 5 | RNVC: 9
1092105-0100-019: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-336-7572
Loop Clamp

123367572
DIN3016-1-D1-18X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-18X15-W5: RNCC: 3 | RNVC: 2
RSGU1.18/15-W5: RNCC: 3 | RNVC: 2
RSGU1100.18/15-W5: RNCC: 5 | RNVC: 2
RSGU1.18/15-W5: RNCC: 5 | RNVC: 2
DIN3016-D1-18X15-W5: RNCC: 5 | RNVC: 9

20 Dec 1994

5340-12-702-4775
Mounting Bracket

127024775
VG95211-ML-127024775: RNCC: 2 | RNVC: 2
5.51.0605.0310.92: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-321-7340
Mounting Bracket

123217340
5800425-0000.003: RNCC: 3 | RNVC: 2
626 P 15-3: RNCC: 5 | RNVC: 2

20 Jun 1990

5340-12-302-7049
Resilient Mount

123027049
DIN95363-A30X25-NR60ST: RNCC: 2 | RNVC: 2
1.30.25.1.60NR/ST: RNCC: 5 | RNVC: 2
81100-30X25-M8X20.NR60.ST: RNCC: 5 | RNVC: 2
5218163-60SHORE: RNCC: 5 | RNVC: 2
5218163/11MN60: RNCC: 5 | RNVC: 2
811.000.030.025.08X20.NR60.ST: RNCC: 5 | RNVC: 2
5218163.15: RNCC: 5 | RNVC: 2
5218163.60: RNCC: 5 | RNVC: 2
5218163: RNCC: 5 | RNVC: 9
VG95363-A30X25-NR60ST: RNCC: 5 | RNVC: 9

24 Jan 1985

5340-12-361-6234
Loop Clamp

123616234
DIN3016-1-D2-15-15X15-W1-2-NBR: RNCC: 2 | RNVC: 2

27 Oct 2003

5340-12-315-9792
Mounting Bracket

123159792
P-M11185-001: RNCC: 3 | RNVC: 2
PM11185-001: RNCC: 5 | RNVC: 2

10 Dec 1988

5340-12-338-8846
Catch Strike

123388846
S167.22: RNCC: 3 | RNVC: 2
62710216: RNCC: 3 | RNVC: 2
6030089 TEFLON BESCHICHTET: RNCC: 5 | RNVC: 2
167/22 TEFLON BESCHICHTET: RNCC: 5 | RNVC: 9
2710/216: RNCC: 5 | RNVC: 9

5 Sep 1995

5340-12-370-9574
Plain Solid Disk

123709574
160-72188-02: RNCC: 3 | RNVC: 2
160-72188.02: RNCC: 5 | RNVC: 2
15160-72188.02: RNCC: 5 | RNVC: 9

22 Jan 2007

5340-12-356-1924
Butt Hinge Leaf

123561924
ED41-1310-00032-044: RNCC: 2 | RNVC: 2
ED41-1310-00032-044: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-12-330-7152
Spring Tension Clip

123307152
5900108-3000-04: RNCC: 2 | RNVC: 2
35541: RNCC: 3 | RNVC: 2

29 Jan 1993

5340-12-347-2194
Dust And Moisture Seal Protective Cap

123472194
8842 230-101: RNCC: 3 | RNVC: 2
8842230-101: RNCC: 5 | RNVC: 2

12 Nov 1998

5340-12-328-4949
Nonmetallic Bumper

123284949
100418-03100: RNCC: 2 | RNVC: 2
100418-03100: RNCC: 3 | RNVC: 2
100418-03100: RNCC: 5 | RNVC: 9
100418-03100: RNCC: 5 | RNVC: 9

23 May 1992

5340-12-172-0654
Rod End Clevis

121720654
DIN71752-G6X24-35S20K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G6X24-35S20K-A3P: RNCC: 3 | RNVC: 2
DIN71752-G6X24-35S20K-A3P: RNCC: 3 | RNVC: 2
DIN71752-G6X24-35S20K-A2P: RNCC: 5 | RNVC: 2
G6X24DIN71752-35S20KVERZINKT: RNCC: 5 | RNVC: 2
DIN71752-G6X24-35S20K-A2P: RNCC: 5 | RNVC: 2
100200060024/023-35S20K: RNCC: 5 | RNVC: 2
100200060024/024-35S20K: RNCC: 5 | RNVC: 2
DIN71752-G6X24-35S20K-A2P: RNCC: 5 | RNVC: 2

19 Dec 1977

5340-12-190-7200
Angle Bracket

121907200
NO PRIMARY REF 12-190-7200: RNCC: 3 | RNVC: 2
7512 138562: RNCC: 5 | RNVC: 9
7512138562: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-162-7650
Clamping Catch

121627650
91-452-07: RNCC: 3 | RNVC: 2
151.432: RNCC: 3 | RNVC: 2
TL100: RNCC: 5 | RNVC: 9
TL100: RNCC: 5 | RNVC: 9
TL100A: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-700-1916
Double Angle Bracket

127001916
51-260361034: RNCC: 2 | RNVC: 2
765-14-SB129: RNCC: 3 | RNVC: 2

4 Nov 1991

5340-12-301-3817
Mending Plate

123013817
P-855341-001: RNCC: 3 | RNVC: 2
P855341-001: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-12-196-3060
Resilient Mount

121963060
DIN95363-B40X30-M8X19-NR65ST: RNCC: 2 | RNVC: 2
51003129: RNCC: 5 | RNVC: 2
51003129: RNCC: 5 | RNVC: 2
52.1523.750.99: RNCC: 5 | RNVC: 2
510031-M8X19.NR65.ST: RNCC: 5 | RNVC: 2
81110-40X30-M8X19.NR65.ST: RNCC: 5 | RNVC: 2
VG95363-B40X30-M8X19-NR65ST: RNCC: 5 | RNVC: 9

27 Jun 1983

5340-12-314-1663
Loop Clamp

123141663
DIN3016-1-A1-56X20-W1-2: RNCC: 2 | RNVC: 2
RS1.56/20: RNCC: 3 | RNVC: 2
DIN3016-A1-56X20-W1-2: RNCC: 3 | RNVC: 2
4110020056: RNCC: 5 | RNVC: 2
0121 0478: RNCC: 5 | RNVC: 2
H3223-A56X20: RNCC: 5 | RNVC: 2
DIN3016-A1-56X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-A56X20-W1: RNCC: 5 | RNVC: 9

14 Jun 1988

5340-12-313-6313
Sliding Stay

123136313
NO PRIMARY REF 12-313-6313: RNCC: 3 | RNVC: 2
7109 168437: RNCC: 5 | RNVC: 9

21 Apr 1988

5340-12-354-8321
Metal Grille

123548321
8320-0001: RNCC: 2 | RNVC: 2
8320-0001: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-349-8357
Rim Lock

123498357
MZ 1897-614 POS.3: RNCC: 3 | RNVC: 2
MZ1897-614POS.3.1: RNCC: 5 | RNVC: 2

13 Jan 2000

5340-12-701-7185
Angle Bracket

127017185
VG95211-ML-127017185: RNCC: 2 | RNVC: 2
5.12.7601.8282.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-156-5886
Retaining Strap

121565886
BSS15X25X3: RNCC: 3 | RNVC: 2
4730001518: RNCC: 5 | RNVC: 2
1 902 003 605: RNCC: 5 | RNVC: 2
15300000015: RNCC: 5 | RNVC: 2
5300000015: RNCC: 5 | RNVC: 2
XX004-8112: RNCC: 5 | RNVC: 2
01-3-7604-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5404
Mounting Plate

127025404
VG95211-ML-127025404: RNCC: 2 | RNVC: 2
5.51.7204.4101.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-321-8953
Metal Runner

123218953
7068-15100-016-2: RNCC: 3 | RNVC: 2

6 Jul 1990

5340-12-330-9170
Mounting Bracket

123309170
2718-000200.000.0: RNCC: 2 | RNVC: 2
2718-000200.000.0: RNCC: 3 | RNVC: 2

25 Feb 1993

5340-12-702-5121
Mounting Plate

127025121
VG95211-ML-127025121: RNCC: 2 | RNVC: 2
5.51.6501.1253.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-192-3081
Hand Crank

121923081
201002: RNCC: 3 | RNVC: 2
X510/7647305: RNCC: 5 | RNVC: 2
2095-24-8-00: RNCC: 5 | RNVC: 2
2095.24.8.00: RNCC: 5 | RNVC: 2
X510-76473-05: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-701-6789
Dust And Moisture Seal Protective Cap

127016789
VG95211-ML-127016789: RNCC: 2 | RNVC: 2
5.12.7212.8020.93: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-348-6746
Webbing Strap

123486746
1711-070220.000.0: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-344-6783
Mounting Plate

123446783
2300311-060001.002.0: RNCC: 2 | RNVC: 2
2300311-060001.002.0: RNCC: 3 | RNVC: 2
1813347: RNCC: 5 | RNVC: 2

27 Nov 1997

5340-12-317-9612
Angle Bracket

123179612
3641602: RNCC: 3 | RNVC: 2

30 May 1989

5340-12-362-2838
Loop Clamp

123622838
LN9490BK19: RNCC: 2 | RNVC: 2

3 Feb 2004

5340-12-333-3575
Double Angle Bracket

123333575
81429020133: RNCC: 2 | RNVC: 2
81429020133: RNCC: 3 | RNVC: 2
81.42902.0133: RNCC: 5 | RNVC: 2

6 Dec 1993

5340-12-345-4314
Mounting Plate

123454314
54.0053.235.00: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-12-345-3582
Mounting Plate

123453582
54.0053.083.01: RNCC: 3 | RNVC: 2

5 Mar 1998

5340-12-141-5769
Loop Clamp

121415769
KN628-41-5-12L10-85KN81M6X4: RNCC: 3 | RNVC: 2
KN628-41-5-12L10-85KN81M6X4: RNCC: 5 | RNVC: 2
102-20-069-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-385-9752
Access Hole Frame

123859752
2500262-067001.000.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-316-2883
Shimmy Damper

123162883
016 01362/16-2-128-80-A2-B2/150N: RNCC: 3 | RNVC: 2
16-2-128-80-A2-B2-150-VM8823: RNCC: 5 | RNVC: 2

6 Jan 1989

5340-12-189-2038
Loop Clamp

121892038
2140152-GRAU: RNCC: 3 | RNVC: 2
2140152GRAU: RNCC: 5 | RNVC: 2

10 Sep 1981

5340-12-358-1634
Detent Plunger

123581634
4055R-310400.062.0: RNCC: 2 | RNVC: 2
4055R-310400.062.0: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-12-132-0658
Turnbuckle Body

121320658
DIN1479-SPM10-ST-VERZINKT: RNCC: 2 | RNVC: 2
5500010V: RNCC: 3 | RNVC: 2
001479010002: RNCC: 5 | RNVC: 2
05301010: RNCC: 5 | RNVC: 2
01115361: RNCC: 5 | RNVC: 9
1115361EY8821-31: RNCC: 5 | RNVC: 9
M10DIN1479: RNCC: 5 | RNVC: 9
5500010S: RNCC: 5 | RNVC: 9
DIN1479-SPM10-ST: RNCC: 5 | RNVC: 9
001479010000: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-0452
Angle Bracket

121980452
C42080-A6-C57: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-334-9359
Handle Grip

123349359
41457-05: RNCC: 3 | RNVC: 2
4.1457-05: RNCC: 5 | RNVC: 2

5 Jul 1994

5340-12-327-1515
Double Angle Bracket

123271515
23176-186100.24.0: RNCC: 3 | RNVC: 2

6 Dec 1991

5340-12-182-1529
Mounting Bracket

121821529
3622028002: RNCC: 3 | RNVC: 2
5801506-1160-001: RNCC: 5 | RNVC: 2
5801506-1160-001: RNCC: 5 | RNVC: 9
36220 28002: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-386-3237
Mechanical Stop

123863237
009-221.401-019: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-353-9325
Section Block Clamp

123539325
J29120247-001: RNCC: 3 | RNVC: 2

21 May 2001

5340-12-309-4072
Bow Handle

123094072
WG 403 461: RNCC: 2 | RNVC: 2
VG95149A92X30-M5ST-CR: RNCC: 2 | RNVC: 2
WG 403 461: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-393-8369
Spacing Threaded Standoff

123938369
SLXNCA6-16-F10-G10-N12: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-12-161-0853
Turnbuckle Body

121610853
LN29601A03-120: RNCC: 2 | RNVC: 2
16X1X120M8X1LN29601: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-306-1340
Nonmetallic Bumper

123061340
43762-008: RNCC: 3 | RNVC: 2
43 762-008: RNCC: 5 | RNVC: 9

30 Jan 1986

5340-12-313-5836
Webbing Strap

123135836
79017/026-0760-0160: RNCC: 3 | RNVC: 2
79017/026-760-160: RNCC: 5 | RNVC: 2
79017/026-0760-0160: RNCC: 5 | RNVC: 9

19 Apr 1988

5340-12-189-0389
Retaining Strap

121890389
9850010: RNCC: 3 | RNVC: 2
25005100000001: RNCC: 5 | RNVC: 2
F300 0T 001 2971: RNCC: 6 | RNVC: 9

19 Aug 1981

5340-12-334-0205
Handle Grip

123340205
4604270020: RNCC: 3 | RNVC: 2

9 Mar 1994

5340-12-177-1431
Retaining Strap

121771431
2300002-122810.000: RNCC: 2 | RNVC: 2
2300002-122810.000: RNCC: 3 | RNVC: 2
2300002-122810: RNCC: 5 | RNVC: 9

17 Jan 1979

5340-12-322-4409
Nonmetallic Bumper

123224409
8100397-200-07: RNCC: 2 | RNVC: 2
8100397-200-07: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-12-702-1650
Mounting Bracket

127021650
VG95211-ML-127021650: RNCC: 2 | RNVC: 2
30.7060.33.02: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-314-6685
Mending Plate

123146685
512214-0433.000: RNCC: 3 | RNVC: 2
512214-0433: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-302-6323
Bow Handle

123026323
5801101-275.016: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-341-9094
Double Angle Bracket

123419094
03591300-GE: RNCC: 3 | RNVC: 2
03591300-GELB LACKIERT: RNCC: 5 | RNVC: 2

14 Nov 1996

5340-12-149-9286
Webbing Strap

121499286
C42123-A16-A8: RNCC: 2 | RNVC: 2
C42123-A16-A8: RNCC: 3 | RNVC: 2
C42123A16A8: RNCC: 5 | RNVC: 2
000-A2-25X2,0X900-PE-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-196-0219
Access Cover

121960219
009-110.200-006: RNCC: 3 | RNVC: 2

17 May 1983

5340-12-381-9571
Double Angle Bracket

123819571
601256-202600.01: RNCC: 2 | RNVC: 2
601256-202600.01: RNCC: 3 | RNVC: 2

21 Apr 2010

5340-12-342-3204
Filler Opening Cap

123423204
01050-00-005: RNCC: 3 | RNVC: 9

22 Jan 1997

5340-12-328-0790
Swivel Caster

123280790
021566: RNCC: 3 | RNVC: 2
TA003712: RNCC: 5 | RNVC: 2
1470 DXK 075 S70-10X20: RNCC: 5 | RNVC: 2

3 Apr 1992

5340-12-306-2438
Mending Plate

123062438
46931-001: RNCC: 3 | RNVC: 2
46 931-001: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-12-156-8899
Cremone Bolt

121568899
NO PRIMARY REF 12-156-8899: RNCC: 3 | RNVC: 2
1-6899-06-3-7445: RNCC: 5 | RNVC: 9
06-3-7445-1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-355-6460
Loop Clamp

123556460
RSGU0.50/25-1.4571: RNCC: 3 | RNVC: 2

30 Nov 2001

5340-12-194-5352
Turnbuckle

121945352
DIN1480-SPM8-ST HAKEN UND OESE: RNCC: 2 | RNVC: 2
4000008V: RNCC: 3 | RNVC: 2
SP-DIN1480-M8-H/OE-ZN: RNCC: 3 | RNVC: 2
4200078-1026 POS.6: RNCC: 5 | RNVC: 2
6080-10260POS6: RNCC: 5 | RNVC: 2
TG6080-10260POS6: RNCC: 5 | RNVC: 2
SPM8DIN1480MITHAKENUNDOESEVERZ: RNCC: 5 | RNVC: 2
4200078-10260POS6: RNCC: 5 | RNVC: 9
4200078-1026 POS.6: RNCC: 5 | RNVC: 9

15 Nov 1982

5340-12-701-7408
Mounting Bracket

127017408
VG95211-ML-127017408: RNCC: 2 | RNVC: 2
5.12.7611.0102.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-156-2893
Friction Catch

121562893
25704-193113.00.0: RNCC: 2 | RNVC: 2
25704-193113.00.0: RNCC: 3 | RNVC: 2
25704-193113-00-0: RNCC: 5 | RNVC: 2
25704-193113-00-0: RNCC: 5 | RNVC: 9
25704-193113.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-311-9398
Spring Tension Clip

123119398
115799: RNCC: 3 | RNVC: 2
117-112.0002.4: RNCC: 5 | RNVC: 2
TK-BA35-5340-107: RNCC: 5 | RNVC: 2
TK-E59C-5340-016: RNCC: 5 | RNVC: 2

2 Nov 1987

5340-12-168-1533
Retaining Strap

121681533
23176-381000-04-0: RNCC: 2 | RNVC: 2
23176-381000-04-0: RNCC: 5 | RNVC: 2
23176-381000.04.0: RNCC: 5 | RNVC: 9

23 Feb 1977

5340-12-178-9102
Loop Clamp

121789102
5561489/4: RNCC: 3 | RNVC: 2
5561489-4: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-349-4055
Access Cover

123494055
590601-0346.000: RNCC: 3 | RNVC: 2
590601-0346.000: RNCC: 5 | RNVC: 2
590601-0346.000: RNCC: 5 | RNVC: 9

10 Nov 1999

5340-12-186-3148
Dust And Moisture Seal Protective Cap

121863148
HP006-5-00000-74-0-91: RNCC: 3 | RNVC: 2
HP006: RNCC: 5 | RNVC: 2

13 Dec 1980

5340-12-332-8113
Double Angle Bracket

123328113
160-75335: RNCC: 3 | RNVC: 2
160-75335: RNCC: 5 | RNVC: 9

22 Sep 1993

5340-12-010-8609

5340-12-192-3233
Dust And Moisture Seal Protective Cap

121923233
101120: RNCC: 3 | RNVC: 2
7360781: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-199-4143
Angle Bracket

121994143
3094280440: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-325-6423
Access Door

123256423
100013034: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-12-306-0939
Angle Bracket

123060939
P-295647-001: RNCC: 3 | RNVC: 2
P295647-001: RNCC: 5 | RNVC: 2

27 Jan 1986

5340-12-359-0522
Mounting Bracket

123590522
3875420740: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-350-4890
Mounting Plate

123504890
10063-730200.06: RNCC: 3 | RNVC: 2
10063-730200.06: RNCC: 5 | RNVC: 9

5 Apr 2000

5340-12-180-2920
Plain Solid Disk

121802920
0730 362 055: RNCC: 3 | RNVC: 2
0730362055: RNCC: 5 | RNVC: 9

31 Aug 1979

5340-12-348-0273
Angle Bracket

123480273
3736334: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-12-350-8240
Lock-Release Lever

123508240
0611000020: RNCC: 3 | RNVC: 2

25 May 2000

5340-12-381-9352
Access Cover

123819352
03.0027: RNCC: 3 | RNVC: 2
BA03.0027SE: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-12-359-6050
Lock-Release Lever

123596050
9452680013: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-355-4323
Retaining Clip

123554323
1000042-112650.02: RNCC: 3 | RNVC: 2

15 Nov 2001

5340-12-333-2112
Mounting Bracket

123332112
81669225004: RNCC: 2 | RNVC: 2
81669225004: RNCC: 3 | RNVC: 2
81.66922.5004: RNCC: 5 | RNVC: 2

10 Nov 1993

5340-12-192-2061
Headless Grooved Rod

121922061
404-5.17: RNCC: 3 | RNVC: 2
404-5-17: RNCC: 5 | RNVC: 9
85-691-4546: RNCC: 6 | RNVC: 9

30 Mar 1982

5340-12-300-4172
Loop Clamp

123004172
DIN3016-G1-118X20-W1-2: RNCC: 2 | RNVC: 2
SP118/20SKZ: RNCC: 3 | RNVC: 2
DIN3016-G1-118X20-W1-2: RNCC: 3 | RNVC: 2
01510000118: RNCC: 5 | RNVC: 2
SP118-20SKZ: RNCC: 5 | RNVC: 2
VG95931-G118X20-W1: RNCC: 5 | RNVC: 9
VG95931G118X20-W1: RNCC: 5 | RNVC: 9

1 Aug 1984

5340-12-388-1181
Loop Clamp

123881181
DIN3016-1-E1-16X15-W5-NBR: RNCC: 2 | RNVC: 2

24 Feb 2012

5340-12-171-2327
Retaining Strap

121712327
81974010696: RNCC: 3 | RNVC: 2
23250-120607-006-0: RNCC: 5 | RNVC: 9
23250-120607.006.0: RNCC: 5 | RNVC: 9

21 Sep 1977

5340-12-142-9987
Resilient Mount

121429987
837-C 3695 630-3: RNCC: 3 | RNVC: 2
2-09-003602-01: RNCC: 3 | RNVC: 2
C 3695 630 -3: RNCC: 5 | RNVC: 2
C369563003: RNCC: 5 | RNVC: 2
81.96210-0236: RNCC: 5 | RNVC: 2
C 3695 630 -3: RNCC: 5 | RNVC: 2
C369563003: RNCC: 5 | RNVC: 2
81962100236: RNCC: 5 | RNVC: 2
HZ362-60: RNCC: 5 | RNVC: 9
2-09-003602-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-347-4903
Mounting Plate

123474903
999999-01631-4-5042/2: RNCC: 3 | RNVC: 2
999999-01631-4-5042POS2: RNCC: 5 | RNVC: 9

16 Dec 1998

5340-12-368-3110
Mounting Bracket

123683110
213-0102-PA-SCHWARZ: RNCC: 3 | RNVC: 2
63540032: RNCC: 5 | RNVC: 2

15 Feb 2006

5340-12-339-7011
Support Hook

123397011
2500255-190000.014.0: RNCC: 2 | RNVC: 2
2500255-190000.014.0: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-12-329-5709
Mounting Plate

123295709
7068-00000-050-2: RNCC: 3 | RNVC: 2

2 Sep 1992

5340-12-330-1197
Spring Tension Clip

123301197
L.S.100/19: RNCC: 3 | RNVC: 2
L.S.100/19 K: RNCC: 5 | RNVC: 2
L.S.100/19 S: RNCC: 5 | RNVC: 2
LS100/19: RNCC: 5 | RNVC: 2

5 Nov 1992

5340-12-301-7775
Nonmetallic Bumper

123017775
4179135: RNCC: 3 | RNVC: 2
1280-032: RNCC: 5 | RNVC: 2
S12B.K02.09.00.003: RNCC: 5 | RNVC: 2

8 Nov 1984

5340-12-199-0292
Metal Runner

121990292
5801549-21203.003: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-12-702-1645
Blank Panel

127021645
VG95211-ML-127021645: RNCC: 2 | RNVC: 2
30.7010.110: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-306-8977
Bridge Clamp

123068977
5900081-3020: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-12-174-2501
Electrical-Mechanical Equipment Post

121742501
900C5016-000-01: RNCC: 3 | RNVC: 2
F01-175: RNCC: 5 | RNVC: 2

19 Jun 1978

5340-12-316-1989
Lock-Release Lever

123161989
4900286-201121.00: RNCC: 2 | RNVC: 2
4900286-201121.00: RNCC: 3 | RNVC: 2

30 Dec 1988

5340-12-350-1311
Spacing Threaded Standoff

123501311
5.13.089: RNCC: 3 | RNVC: 2

18 Feb 2000

5340-12-319-0472
Rim Latch

123190472
7500.992.3: RNCC: 3 | RNVC: 2
4358609410: RNCC: 5 | RNVC: 2

1 Sep 1989

5340-12-169-2032
Friction Catch Stud

121692032
CF305769C: RNCC: 3 | RNVC: 2
CF305769C: RNCC: 5 | RNVC: 2
CF 305 769 C: RNCC: 5 | RNVC: 2
CF 305 769 C: RNCC: 5 | RNVC: 2
CF305769C: RNCC: 5 | RNVC: 2
CF 305 769 C: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-311-0621
Mending Plate

123110621
0241 7974: RNCC: 3 | RNVC: 2
02417974: RNCC: 5 | RNVC: 2

22 Jul 1987

5340-12-196-2659
Lock-Release Lever

121962659
03468800: RNCC: 3 | RNVC: 2

22 Jun 1983

5340-12-362-3082
Loop Clamp

123623082
LN9490BM60: RNCC: 2 | RNVC: 2

5 Feb 2004

5340-12-339-1700
Nonmetallic Bumper

123391700
10.41.092.00: RNCC: 3 | RNVC: 2
104109200: RNCC: 5 | RNVC: 2
0008660493: RNCC: 5 | RNVC: 2

20 Oct 1995

5340-12-321-7224
Mounting Bracket

123217224
702-147800-000-0: RNCC: 3 | RNVC: 2

19 Jun 1990

5340-12-304-6351
Handwheel

123046351
VG85088-A-150X12-RG: RNCC: 2 | RNVC: 2
VG85088-A-150X12-RG: RNCC: 3 | RNVC: 2
VG85088-A-150X12-RG: RNCC: 3 | RNVC: 2
VG85088-A-150X12-RG: RNCC: 3 | RNVC: 9
A150X12VG85088RG5: RNCC: 5 | RNVC: 9
VG85088-A150X12-RG5: RNCC: 5 | RNVC: 9

7 Aug 1985

5340-12-178-9130
Loop Clamp

121789130
5562482/4: RNCC: 3 | RNVC: 2
5562482-4: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-701-2807
Rod End Connector

127012807
VG95211-ML-127012807: RNCC: 2 | RNVC: 2
5.12.5101.0690.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-164-0389
Resilient Mount

121640389
HFS 1-8: RNCC: 3 | RNVC: 2
HFS1-8: RNCC: 5 | RNVC: 2
VBE424-70: RNCC: 5 | RNVC: 2
3522 500 17853: RNCC: 5 | RNVC: 2
HFS1-8: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5161
Mounting Plate

127025161
VG95211-ML-127025161: RNCC: 2 | RNVC: 2
5.51.6501.1561.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-348-9327
Retaining Band

123489327
245/9713-16-00-05: RNCC: 3 | RNVC: 2

3 Sep 1999

5340-12-315-0934
Double Angle Bracket

123150934
4900153-11340-03: RNCC: 2 | RNVC: 2
4900153-11340-03: RNCC: 3 | RNVC: 2
4900153-11340-03: RNCC: 5 | RNVC: 9

15 Sep 1988

5340-12-177-7228
Dust And Moisture Seal Protective Cap

121777228
2300002-224180.000: RNCC: 2 | RNVC: 2
2300002-224180.000: RNCC: 3 | RNVC: 2
2300002-224180: RNCC: 5 | RNVC: 9
2300002-224180: RNCC: 5 | RNVC: 9

14 Feb 1979

5340-12-177-1583
Retaining Strap

121771583
5801215-79-003: RNCC: 3 | RNVC: 2
5801215-79.003: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-319-2071
Mending Plate

123192071
DIN3015-Z-DP-1-W1: RNCC: 2 | RNVC: 2
GD-1D: RNCC: 3 | RNVC: 2
HRZ1DP STZN: RNCC: 3 | RNVC: 2
DP-B1: RNCC: 3 | RNVC: 2
DIN3015-ZDP1-W1: RNCC: 5 | RNVC: 2
GD1D: RNCC: 5 | RNVC: 2
DPB1X: RNCC: 5 | RNVC: 2
15009137: RNCC: 5 | RNVC: 2
1641507: RNCC: 5 | RNVC: 2
DP-B1: RNCC: 5 | RNVC: 2

13 Sep 1989

5340-12-340-2335
Angle Bracket

123402335
463-223600.017: RNCC: 3 | RNVC: 9
9896459: RNCC: 5 | RNVC: 9

16 Mar 1996

5340-12-358-6028
Ball Socket Seat

123586028
5419910022: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-180-9562
Platte

121809562
4.0843: RNCC: 3 | RNVC: 2
81.62383-0012: RNCC: 5 | RNVC: 2
81623830012: RNCC: 5 | RNVC: 2
4-0181: RNCC: 5 | RNVC: 2

12 Oct 1979

5340-12-308-2946
Double Angle Bracket

123082946
P-875978-003: RNCC: 3 | RNVC: 2
P875978-003: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-167-8599
Butt Hinge Leaf

121678599
6100008-74.02-LINKS: RNCC: 2 | RNVC: 2
9.70.00.0-5.059.89: RNCC: 3 | RNVC: 2
0107 0707: RNCC: 5 | RNVC: 2
6100008-74-02LINKS: RNCC: 5 | RNVC: 2
970000-505989: RNCC: 5 | RNVC: 2
6100008-74.02LINKS: RNCC: 5 | RNVC: 2
61014-72.34LINKS: RNCC: 5 | RNVC: 2
6100008-74.02LINKS: RNCC: 5 | RNVC: 9
61014-72.34LINKS: RNCC: 5 | RNVC: 9
WZ-E-0410-LINKS: RNCC: 5 | RNVC: 9

26 Jan 1977

5340-12-702-4988
Mounting Bracket

127024988
VG95211-ML-127024988: RNCC: 2 | RNVC: 2
5.51.5811.0400.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-374-7439
Access Cover

123747439
999899-120000.003.0: RNCC: 3 | RNVC: 2

13 Mar 2008

5340-12-701-2571
Mounting Bracket

127012571
VG95211-ML-127012571: RNCC: 2 | RNVC: 2
5.12.4203.2105.98: RNCC: 3 | RNVC: 2
0501403268399: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-359-0931
Loop Clamp

123590931
DIN3016-1-D1-24X15-W1-2-NBR: RNCC: 2 | RNVC: 2

17 Dec 2002

5340-12-339-6843
Handle Grip

123396843
5.321-001.0: RNCC: 3 | RNVC: 2
5.321.001.0: RNCC: 5 | RNVC: 2
5.321-001: RNCC: 5 | RNVC: 9
5.321.001: RNCC: 5 | RNVC: 9

20 Dec 1995

5340-12-194-6919
Retaining Strap

121946919
WW306640-R: RNCC: 3 | RNVC: 9
WW 306 640 -R: RNCC: 5 | RNVC: 2
WW3066400R: RNCC: 5 | RNVC: 2
WW3066400R: RNCC: 5 | RNVC: 9
WW 306 640 -R: RNCC: 5 | RNVC: 9

29 Nov 1982

5340-12-388-7986
Mounting Bracket

123887986
H1.1784-47-01-30.00-01: RNCC: 3 | RNVC: 2

24 Apr 2012

5340-12-130-0107
Retaining Strap

121300107
DIN72573-1X7-ST-ZN: RNCC: 2 | RNVC: 2
DIN72573-1X7-ST-ZN: RNCC: 3 | RNVC: 2
1X7DIN72573ST: RNCC: 5 | RNVC: 9
DIN72573-1X7-ST: RNCC: 5 | RNVC: 9
1X7DIN72573STR0H: RNCC: 5 | RNVC: 9
DIN72573-1X7-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-358-2092
Angle Bracket

123582092
64452084: RNCC: 3 | RNVC: 2
32248: RNCC: 5 | RNVC: 9
4452/084: RNCC: 5 | RNVC: 9

26 Sep 2002

5340-12-702-1827
Retaining Strap

127021827
VG95211-ML-127021827: RNCC: 2 | RNVC: 2
30.7206.1020: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-317-7442
Butt Hinge Leaf

123177442
P-231059-414: RNCC: 3 | RNVC: 2
P231059-414: RNCC: 5 | RNVC: 2

8 May 1989

5340-12-131-5617
Turnbuckle

121315617
DIN82004-B4-VERZINKT: RNCC: 2 | RNVC: 2
DIN82004-B4-ZN: RNCC: 3 | RNVC: 2
B4DIN82004VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-178-7682
Angle Bracket

121787682
C106-A44-C74: RNCC: 2 | RNVC: 2
C106-A44-C74: RNCC: 3 | RNVC: 2
C106A44C74: RNCC: 5 | RNVC: 2
C106-A44-C74: RNCC: 5 | RNVC: 2
C106A44C74: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-702-7564
Plug Button

127027564
50-06101540075: RNCC: 2 | RNVC: 2

13 Dec 1995

5340-12-178-7245
Access Cover

121787245
01TC30519: RNCC: 3 | RNVC: 2

14 May 1979

5340-12-183-0758
Loop Clamp

121830758
0287 9391: RNCC: 3 | RNVC: 2
2879391ED0693-70: RNCC: 5 | RNVC: 2
2879391: RNCC: 5 | RNVC: 2

18 Mar 1980

5340-12-354-4076
Metallic Bumper

123544076
3915223: RNCC: 3 | RNVC: 2
305612: RNCC: 5 | RNVC: 2

9 Jul 2001

5340-12-345-4397
Mounting Bracket

123454397
54.0053.448.16: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-12-373-3493
Clamping Catch

123733493
L524M1035101: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-12-329-2352
Synchro Clamp

123292352
R13519: RNCC: 3 | RNVC: 2
R13519: RNCC: 5 | RNVC: 9

25 Jul 1992

5340-12-199-1420
Spring Tension Clip

121991420
81976400156: RNCC: 3 | RNVC: 2

29 Mar 1984

5340-12-025-0275

5340-12-310-5792
Electrical-Mechanical Equipment Post

123105792
80996020059: RNCC: 3 | RNVC: 2
80.99602.0059: RNCC: 5 | RNVC: 2

3 Jun 1987

5340-12-310-0042
Retaining Strap

123100042
177M56006: RNCC: 3 | RNVC: 2

27 Mar 1987

5340-12-354-7554
Loop Clamp

123547554
0543210: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-12-356-1669
Loop Clamp

123561669
RSGU0.8/12-W5: RNCC: 3 | RNVC: 2

29 Jan 2002

5340-12-150-7272
Webbing Strap

121507272
C22155A3B134: RNCC: 3 | RNVC: 2
C22155-A3-B134: RNCC: 5 | RNVC: 2
C42123-A16-A4: RNCC: 5 | RNVC: 2
697454: RNCC: 5 | RNVC: 2
AW7100.230/6: RNCC: 5 | RNVC: 2
14290-0: RNCC: 5 | RNVC: 2
14290.0-0: RNCC: 5 | RNVC: 2
000-A2-25X2,0X500-PE-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-306-0789
Angle Bracket

123060789
P-243720-751: RNCC: 3 | RNVC: 2
P243720-751: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-702-5192
Mounting Bracket

127025192
VG95211-ML-127025192: RNCC: 2 | RNVC: 2
5.51.7001.0060.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-344-4230
Mounting Bracket

123444230
A-616743-027: RNCC: 3 | RNVC: 2
A616743-027: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-320-7914
Mending Plate

123207914
2300232-205000.007.0: RNCC: 2 | RNVC: 2
2300232-205000.007.0: RNCC: 3 | RNVC: 2
2300232-205000.007.02: RNCC: 5 | RNVC: 9

16 Feb 1990

5340-12-187-8166
Mounting Bracket

121878166
2300109-970400.084.0: RNCC: 2 | RNVC: 2
2300109-970400.084.0: RNCC: 3 | RNVC: 2
2300109-970400.084.0: RNCC: 3 | RNVC: 2
2300109-970400-084-0: RNCC: 5 | RNVC: 2
2300109-970400-084-0: RNCC: 5 | RNVC: 2
2300109-970400.084.0: RNCC: 5 | RNVC: 9
2300109-970400-084-0: RNCC: 5 | RNVC: 9

13 May 1981

5340-12-339-7016
Nonmetallic Bumper

123397016
2500255-190501.000.0: RNCC: 2 | RNVC: 2
2500255-190501.000.0: RNCC: 3 | RNVC: 2
2500255-190501.000.0: RNCC: 5 | RNVC: 2

22 Dec 1995

5340-12-321-9118
Permanent Magnet

123219118
77.126-119113-04.4: RNCC: 3 | RNVC: 2
SP03370: RNCC: 5 | RNVC: 2
00.4.510.0009: RNCC: 5 | RNVC: 9

9 Jul 1990

5340-12-300-2116
Loop Clamp

123002116
DIN3016-2-G1-58X15-W1-2: RNCC: 2 | RNVC: 2
SP58/15SKZ: RNCC: 3 | RNVC: 2
DIN3016-G1-58X15-W1-2: RNCC: 3 | RNVC: 2
01410000058: RNCC: 5 | RNVC: 2
900288058100: RNCC: 5 | RNVC: 2
SP58-15X0-8SKZN288A: RNCC: 5 | RNVC: 2
VG95931-G58X15-W1: RNCC: 5 | RNVC: 9
DIN3016-G1-58X15-W1-2: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-701-5616
Loop Clamp

127015616
VG95211-ML-127015616: RNCC: 2 | RNVC: 2
5.12.6114.0990.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-154-6908
Spring Tension Clip

121546908
7-34-7-17-60-00-06: RNCC: 3 | RNVC: 2
109232-176000-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-5813
Spacing Threaded Standoff

123565813
028013329: RNCC: 3 | RNVC: 2
496-0177-06-02-002: RNCC: 5 | RNVC: 2
028013329: RNCC: 5 | RNVC: 9

13 Mar 2002

5340-12-382-8716
Retaining Bail

123828716
2614-21000: RNCC: 3 | RNVC: 2

18 Aug 2010

5340-12-366-1370
Mounting Bracket

123661370
2500267-533131.000.0: RNCC: 2 | RNVC: 2
2500267-533131.000.0: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-12-197-0534
Nonmetallic Solid Wheel

121970534
9126.001.4: RNCC: 3 | RNVC: 2

14 Sep 1983

5340-12-379-8470
Threaded Rod End

123798470
05932133: RNCC: 3 | RNVC: 2
CV168920: RNCC: 5 | RNVC: 2
05932133: RNCC: 5 | RNVC: 2

8 Sep 2009

5340-12-380-0174
Loop Clamp

123800174
DIN3016-2-G1-28X12-W1-2-CR: RNCC: 2 | RNVC: 2

18 Sep 2009

5340-12-196-9531
Double Angle Bracket

121969531
A-295068-401: RNCC: 3 | RNVC: 2
A295068-401: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-183-8517
Spring Tension Clip

121838517
90.703.03.228: RNCC: 3 | RNVC: 2
81.61940-0036: RNCC: 5 | RNVC: 2
81619400036: RNCC: 5 | RNVC: 2
90-703-03-22-8: RNCC: 5 | RNVC: 2

24 May 1980

5340-12-198-2698
Angle Bracket

121982698
A-296710-150: RNCC: 3 | RNVC: 2
A296710-150: RNCC: 5 | RNVC: 2

6 Jan 1984

5340-12-333-8701
Mounting Bracket

123338701
405-5-8: RNCC: 3 | RNVC: 2
405-5.8: RNCC: 5 | RNVC: 2

18 Feb 1994

5340-12-302-4753
Gummi- Riemen

123024753
TK5340-042: RNCC: 2 | RNVC: 2
6020172: RNCC: 3 | RNVC: 2
598717: RNCC: 5 | RNVC: 2
TK-BA35-5340-368: RNCC: 5 | RNVC: 2
90 975 2408: RNCC: 5 | RNVC: 2
909752408: RNCC: 5 | RNVC: 2
BSIB90-975-2408: RNCC: 5 | RNVC: 2
MO 203 9410: RNCC: 5 | RNVC: 9
M 0203 9410: RNCC: 5 | RNVC: 9

4 Jan 1985

5340-12-330-9265
Access Cover

123309265
2107-110100.11B: RNCC: 2 | RNVC: 2
2107-110100.11B: RNCC: 3 | RNVC: 2

26 Feb 1993

5340-12-311-8180
Retaining Clip

123118180
DIN71805-S8-A2P: RNCC: 2 | RNVC: 2
S8DIN71805-A2P: RNCC: 5 | RNVC: 2

20 Oct 1987

5340-12-368-7885
Loop Clamp

123687885
SP6000.35/15SZ"B"W5: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-12-305-2134
Pad Eye

123052134
2300002-067200.001: RNCC: 2 | RNVC: 2
2300002-067200.001: RNCC: 5 | RNVC: 9

8 Oct 1985

5340-12-164-4467
Retaining Strap

121644467
2360-220000.36.0: RNCC: 2 | RNVC: 2
2360-220000-36-0: RNCC: 5 | RNVC: 2
2360-220000.36.0: RNCC: 5 | RNVC: 2
2360-220000.36.0: RNCC: 5 | RNVC: 2
2360-220000-36-0: RNCC: 5 | RNVC: 9
2360-220000.36.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-139-7072
Door Handle

121397072
REM03-001: RNCC: 3 | RNVC: 2
REM03-001: RNCC: 5 | RNVC: 2
REM03-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-366-7301
Mounting Bracket

123667301
J92222366-005: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-12-362-0758
Mounting Bracket

123620758
70-000-255: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-351-0364
Mounting Plate

123510364
4.801-061: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-701-4574
Mounting Bracket

127014574
VG95211-ML-127014574: RNCC: 2 | RNVC: 2
5.12.5314.1160.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-185-1939
Retaining Strap

121851939
NO PRIMARY REF 12-185-1939: RNCC: 3 | RNVC: 2
17-2-7091-3: RNCC: 5 | RNVC: 9

18 Sep 1980

5340-12-315-8367
Mending Plate

123158367
5019R-4000.09: RNCC: 3 | RNVC: 2
120294: RNCC: 5 | RNVC: 2

30 Nov 1988

5340-12-332-5639
Mounting Plate

123325639
1361235-16060-01: RNCC: 3 | RNVC: 2

20 Aug 1993

5340-12-346-4201
Nonmetallic Bumper

123464201
SP020/11: RNCC: 3 | RNVC: 2

24 Jul 1998

5340-12-309-6953
Resilient Mount

123096953
81600-786026S24.NR55.ST: RNCC: 3 | RNVC: 2
786026S23MITTEL: RNCC: 3 | RNVC: 2
749002477: RNCC: 5 | RNVC: 2

17 Feb 1987

5340-12-198-1446
Mending Plate

121981446
5801999-391000.00: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-190-7224
Angle Bracket

121907224
NO PRIMARY REF 12-190-7224: RNCC: 3 | RNVC: 2
7504 137279: RNCC: 5 | RNVC: 9
7504137279: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-346-0143
Access Cover

123460143
051 883: RNCC: 3 | RNVC: 2
051883: RNCC: 5 | RNVC: 2

29 May 1998

5340-12-130-4658

5340-12-321-9722
Extension Drawer Slide

123219722
69000-124: RNCC: 3 | RNVC: 2

13 Jul 1990

5340-12-393-7173
Mounting Plate

123937173
11.44144-0010: RNCC: 3 | RNVC: 2
11.44144-0010: RNCC: 5 | RNVC: 2

7 Oct 2013

5340-12-304-4144
Angle Bracket

123044144
2500093-1200.18: RNCC: 2 | RNVC: 2
2500093-1200.18: RNCC: 3 | RNVC: 2
2500093-1200.18: RNCC: 5 | RNVC: 9

16 Jul 1985

5340-12-365-3228
Catch Strike

123653228
J53230686-001: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-394-3824
Mounting Bracket

123943824
1-8186-001-58: RNCC: 3 | RNVC: 2

27 Nov 2013

5340-12-151-3259
Resilient Mount

121513259
DIN95369-A4-3-CR-NMST: RNCC: 2 | RNVC: 2
352250015763: RNCC: 5 | RNVC: 2
VBE424-57: RNCC: 5 | RNVC: 2
C2060AG: RNCC: 5 | RNVC: 2
550-0436: RNCC: 5 | RNVC: 2
151007-M12-CR.AM-60: RNCC: 5 | RNVC: 2
60-201-060 A: RNCC: 5 | RNVC: 2
550-0436: RNCC: 5 | RNVC: 2
C2060PAG: RNCC: 5 | RNVC: 9
550-0436: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-320-7918
Access Cover

123207918
2300232-206202.000.0: RNCC: 2 | RNVC: 2
2300232-206202.000.0: RNCC: 3 | RNVC: 2
9997023-206202.000.0: RNCC: 5 | RNVC: 2
2300232-206202.000.02: RNCC: 5 | RNVC: 9

16 Feb 1990

5340-12-343-3405
Mounting Bracket

123433405
9997007-060010.000.0: RNCC: 3 | RNVC: 2

10 Jun 1997

5340-12-390-2963
Headless Straight Rod

123902963
9999261-391200.007.0: RNCC: 3 | RNVC: 2

26 Oct 2012

5340-12-357-6511
Mounting Plate

123576511
9997001-205000.002.0: RNCC: 3 | RNVC: 2
9997001-205000-002-0: RNCC: 5 | RNVC: 9

9 Jul 2002

5340-12-337-5462
Loop Clamp

123375462
DIN71555-45,5LACK BIS 600 GRAD C: RNCC: 2 | RNVC: 2
071555045501: RNCC: 5 | RNVC: 2
45,5DIN71555DBL739830: RNCC: 5 | RNVC: 2
DIN71555-45,5 DBL7398.30: RNCC: 5 | RNVC: 2
45,5DIN71555LACK BIS 600 GRAD C: RNCC: 5 | RNVC: 2

10 Mar 1995

5340-12-344-4235
Mounting Bracket

123444235
A-616743-043: RNCC: 3 | RNVC: 2
A616743-043: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-190-2944
Electrical-Mechanical Equipment Post

121902944
VG95148C5XM2,5X10,5-NRST: RNCC: 2 | RNVC: 2
VG95148C5XM2,5X10,5-NRST: RNCC: 3 | RNVC: 2
1200037-165.004: RNCC: 3 | RNVC: 2
1200037-165-004: RNCC: 5 | RNVC: 2
1200037-165.004: RNCC: 5 | RNVC: 9

17 Nov 1981

5340-12-311-7317
Mending Plate

123117317
C40195-A673-C11: RNCC: 3 | RNVC: 2
C40195A673C11: RNCC: 5 | RNVC: 2

12 Oct 1987

5340-12-148-8009
Double Angle Bracket

121488009
23114-2807.11: RNCC: 2 | RNVC: 2
44.142.31.170: RNCC: 3 | RNVC: 2
44-142-31-170: RNCC: 5 | RNVC: 2
23114-2807-11: RNCC: 5 | RNVC: 2
23114-2807-11: RNCC: 5 | RNVC: 9
23114-2807-11: RNCC: 5 | RNVC: 9
23114-2807-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-353-4388
Spacing Threaded Standoff

123534388
DI643/15: RNCC: 3 | RNVC: 2
M3/SW6/15STV: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-12-194-4796
Access Cover

121944796
3008802: RNCC: 3 | RNVC: 2
E3-8802: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-12-191-0906
Detent Plunger

121910906
23111-2138.04: RNCC: 2 | RNVC: 2
23111-2138.04: RNCC: 3 | RNVC: 2
23111-2138-04: RNCC: 5 | RNVC: 9
23111-2138.04: RNCC: 5 | RNVC: 9
23111-2138-04: RNCC: 5 | RNVC: 9

11 Jan 1982

5340-12-348-9114
Access Cover

123489114
680003/7323-21-00-03: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-311-2279
Retaining Strap

123112279
23305-209200.02.0: RNCC: 2 | RNVC: 2
23305-209200.02.0: RNCC: 3 | RNVC: 2
23305-209200.02.0: RNCC: 5 | RNVC: 9

6 Aug 1987

5340-12-701-5720
Retaining Band

127015720
VG95211-ML-127015720: RNCC: 2 | RNVC: 2
5.12.6149.0300.19: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-348-9878
Rod End Connector

123489878
245/7383-02-00-08: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-351-4379
Rod End Clevis

123514379
601999: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-12-373-9948
Nut And Bolt Locking Plate

123739948
L535M3002211: RNCC: 3 | RNVC: 2

8 Jan 2008

5340-12-303-3062
Butt Hinge

123033062
P-875250-007: RNCC: 3 | RNVC: 2
P875250-007: RNCC: 5 | RNVC: 2

13 Mar 1985

5340-12-321-6728
Loop Clamp

123216728
DIN3016-1-D2-8-8X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-8-8X15-W5: RNCC: 3 | RNVC: 2
RSGU1.2X8/15-W5: RNCC: 3 | RNVC: 2
DIN3016-D2-8-8X15-W5: RNCC: 5 | RNVC: 9

15 Jun 1990

5340-12-703-3086
Mounting Bracket

127033086
VG95211-ML-127033086: RNCC: 2 | RNVC: 2
5.12.2210.1712.01: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-128-9601
Retaining Strap

121289601
VG95933AR-8-MS-BK: RNCC: 2 | RNVC: 2
1/1D8MMN325-CUZN37F29: RNCC: 3 | RNVC: 2
1-1D8MMN325MS: RNCC: 5 | RNVC: 2
1/1D8MMN325MS: RNCC: 5 | RNVC: 2
177M13006: RNCC: 5 | RNVC: 2
378102: RNCC: 5 | RNVC: 2
700325008101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-188-1551
Loop Clamp

121881551
DIN3016-1-E1-50X20-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU0.50/20: RNCC: 3 | RNVC: 2
DIN3016-E1-50X20-W1-2: RNCC: 3 | RNVC: 2
RSGU50-20: RNCC: 5 | RNVC: 2
9400020050: RNCC: 5 | RNVC: 2
RSGU50/20: RNCC: 5 | RNVC: 2
VG95931E50X20-W1: RNCC: 5 | RNVC: 9
DIN3016-E1-50X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-E50X20-W1: RNCC: 5 | RNVC: 9

10 Jun 1981

5340-12-305-3886
Mending Plate

123053886
1361013-80001-12: RNCC: 3 | RNVC: 2

30 Oct 1985

5340-12-393-8558
Spring Loaded Cylinder Fastener

123938558
GN612-12-M20X1,5-B-NI: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-12-151-1987
Turnbuckle

121511987
103-100-0006-000: RNCC: 3 | RNVC: 2
1094310-640: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-314-1168
Mending Plate

123141168
512214-3250.000: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-12-141-3481
Retaining Strap

121413481
DIN72571-1X15-ST: RNCC: 2 | RNVC: 2
DIN72571-1X15-ST: RNCC: 3 | RNVC: 2
1175383: RNCC: 5 | RNVC: 2
3381-014: RNCC: 5 | RNVC: 2
1X15DIN72571ST: RNCC: 5 | RNVC: 2
0592 15: RNCC: 5 | RNVC: 2
153-0009: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-332-4909
Rod End Clevis

123324909
DGAH001: RNCC: 3 | RNVC: 2

16 Aug 1993

5340-12-332-8477
Angle Bracket

123328477
160-75737: RNCC: 3 | RNVC: 2
160-75737: RNCC: 5 | RNVC: 9

27 Sep 1993

5340-12-385-4268
Access Cover

123854268
5582030886: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-324-0624
Dust And Moisture Seal Protective Plug

123240624
53 192: RNCC: 3 | RNVC: 2
3093020097: RNCC: 5 | RNVC: 2

18 Jan 1991

5340-12-375-5695
Rod End Clevis

123755695
S259M6072215: RNCC: 3 | RNVC: 2

13 Jun 2008

5340-12-389-8375
Handwheel

123898375
S000D0116-11114431113/08: RNCC: 3 | RNVC: 2

29 Aug 2012

5340-12-315-2821
Mending Plate

123152821
5802121-000000.04: RNCC: 2 | RNVC: 2
65.7789.460.04-A001: RNCC: 3 | RNVC: 2

8 Oct 1988

5340-12-335-3720
Pad Eye

123353720
073-251130-000-0: RNCC: 2 | RNVC: 2
073-251130-000-0: RNCC: 3 | RNVC: 2

15 Aug 1994

5340-12-317-4961
Butt Hinge Leaf

123174961
171-02/64245: RNCC: 2 | RNVC: 2
171-02/64245: RNCC: 3 | RNVC: 2
171-02/64245: RNCC: 5 | RNVC: 9

13 Apr 1989

5340-12-189-7606
Turnbuckle

121897606
0000463101-04-01: RNCC: 3 | RNVC: 2
M260000463101-04-01: RNCC: 5 | RNVC: 2
M260000463101-04-01: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-315-4436
Retaining Strap

123154436
5802007-201900.01: RNCC: 2 | RNVC: 2
65.7789.055.01-A001: RNCC: 3 | RNVC: 2
5802007-201900.01: RNCC: 5 | RNVC: 2

22 Oct 1988

5340-12-302-8397
Hand Crank

123028397
4900238-1200: RNCC: 2 | RNVC: 2
49.011.12000.00D: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-349-2834
Butt Hinge Leaf

123492834
J52423273-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-700-8600
Threaded End Tensioning Tie Rod

127008600
VG95211-ML-127008600: RNCC: 2 | RNVC: 2
155N1220-28-1,5-957: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-134-1274
Nonmetallic Bumper

121341274
E5555-02-17.05: RNCC: 3 | RNVC: 2
03442361: RNCC: 3 | RNVC: 2
E5555-02-17-05: RNCC: 5 | RNVC: 2
5555-02-17-05: RNCC: 5 | RNVC: 2
5555-02-17.05: RNCC: 5 | RNVC: 2
3442361EEE555-02: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-360-2142
Loop Clamp

123602142
6019970390: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-330-0067
Webbing Strap

123300067
4607600132: RNCC: 3 | RNVC: 2

21 Oct 1992

5340-12-700-9485
Dust And Moisture Seal Protective Cap

127009485
VG95211-ML-127009485: RNCC: 2 | RNVC: 2
2443A-4-1KD: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5197
Mounting Plate

127025197
VG95211-ML-127025197: RNCC: 2 | RNVC: 2
5.51.7002.0060.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-383-9477
Clamping Catch

123839477
6.644-406.0: RNCC: 3 | RNVC: 2

28 Dec 2010

5340-12-186-6455
Hook Handle

121866455
0.048.003.0: RNCC: 3 | RNVC: 2
0-048-003-0: RNCC: 5 | RNVC: 2

23 Jan 1981

5340-12-307-1604
Butt Hinge Leaf

123071604
33-1875-100000.03.0: RNCC: 3 | RNVC: 9

15 May 1986

5340-12-198-8089
Bridge Clamp

121988089
23176-262141.01.0: RNCC: 2 | RNVC: 2
23176-262141.01.0: RNCC: 5 | RNVC: 2
23176-262141-01-0: RNCC: 5 | RNVC: 9

28 Feb 1984

5340-12-320-7722
Mounting Bracket

123207722
2300232-205010.000.0: RNCC: 2 | RNVC: 2
2300232-205010.000.0: RNCC: 3 | RNVC: 2
9997023-205010.000.0: RNCC: 5 | RNVC: 2
2300232-205010.000.02: RNCC: 5 | RNVC: 9

15 Feb 1990

5340-12-165-0415
Loop Clamp

121650415
RS1.6-9/12-3.1364T42: RNCC: 3 | RNVC: 2
LRS1.6-9/12-ALU: RNCC: 5 | RNVC: 2
LRS1100-6-9-12AL: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-135-6868
Door Button

121356868
NO PRIMARY REF 12-135-6868: RNCC: 3 | RNVC: 2
DIN-HNABT131-3-2,5MMDX21MMLG-MS: RNCC: 5 | RNVC: 9
MS2-5MMDX21LGDINHNABT131-3: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-8505
Dust And Moisture Seal Protective Cap

121888505
519-120110.06.0: RNCC: 2 | RNVC: 2
6.6204-0111.1: RNCC: 3 | RNVC: 2
5077 301 127: RNCC: 3 | RNVC: 2
519-120110.06.0: RNCC: 5 | RNVC: 2
3-3590-0701-1: RNCC: 5 | RNVC: 2
6.6204-0111.1: RNCC: 5 | RNVC: 2
5077301127: RNCC: 5 | RNVC: 2
1113327: RNCC: 5 | RNVC: 2
15010862: RNCC: 5 | RNVC: 2
3.3590-0701.1: RNCC: 5 | RNVC: 9

4 Aug 1981

5340-12-317-3685
Headless Straight Rod

123173685
00401-037-000: RNCC: 3 | RNVC: 2
401-37: RNCC: 5 | RNVC: 9

3 Apr 1989

5340-12-313-5687
Dust And Moisture Seal Protective Cap

123135687
009-521.730-001: RNCC: 2 | RNVC: 2
5219-730.001: RNCC: 2 | RNVC: 2
009-521.730-001: RNCC: 3 | RNVC: 2
5219-730.001: RNCC: 5 | RNVC: 2
5219-730.001: RNCC: 5 | RNVC: 9

16 Apr 1988

5340-12-366-7662
Mounting Bracket

123667662
970255908: RNCC: 3 | RNVC: 2
3201-810.90.00.003-000: RNCC: 5 | RNVC: 2

6 Jun 2005

5340-12-385-2261
Spring Loaded Cylinder Fastener

123852261
70.1120.798-00: RNCC: 3 | RNVC: 2

11 May 2011

5340-12-385-2534
Helical Compression Spring Retainer

123852534
F1.1189-40-40-10.00-06: RNCC: 3 | RNVC: 2

13 May 2011

5340-12-177-1330
Angle Bracket

121771330
5800826-05-003: RNCC: 3 | RNVC: 2
5800826-05.003: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-302-2959
Mending Plate

123022959
2300164-291080.013: RNCC: 2 | RNVC: 2
2300164-291080.013: RNCC: 3 | RNVC: 2
2300164-291080.013: RNCC: 3 | RNVC: 2
2300164-291080.013: RNCC: 5 | RNVC: 9
2300164-291080-013: RNCC: 5 | RNVC: 9
2300164-291080.013: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-12-389-0629
Dust And Moisture Seal Protective Plug

123890629
81960020187: RNCC: 3 | RNVC: 2
81.96002-0187: RNCC: 5 | RNVC: 2

23 May 2012

5340-12-162-5240
Helical Compression Spring Seat

121625240
100356-217000-01: RNCC: 2 | RNVC: 2
100356-217000-01: RNCC: 5 | RNVC: 2
100356-217000.01: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-301-4225
Headless Straight Rod

123014225
645-14-03: RNCC: 3 | RNVC: 9

12 Oct 1984

5340-12-318-9952
Double Angle Bracket

123189952
2654-336220.02: RNCC: 2 | RNVC: 2
2654-336220.02: RNCC: 3 | RNVC: 2
2654-336 220.02: RNCC: 5 | RNVC: 9
2654-336 220.02: RNCC: 5 | RNVC: 9
679-08020200.02: RNCC: 5 | RNVC: 9
2654-336 220.02: RNCC: 5 | RNVC: 9
679-08020200.02: RNCC: 5 | RNVC: 9

30 Aug 1989

5340-12-378-4873
Mounting Bracket

123784873
2300461-185131.000.0: RNCC: 2 | RNVC: 2
2300461-185131.000.0: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-12-359-6755
Angle Bracket

123596755
2500261-180000.208.0: RNCC: 2 | RNVC: 2
2500261-180000.208.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-131-5598
Turnbuckle

121315598
DIN82004-B0,4-A3P: RNCC: 2 | RNVC: 2
DIN82004-B0,4-TZN600: RNCC: 2 | RNVC: 2
DIN82004-B0,4-TZN600: RNCC: 3 | RNVC: 2
DIN82004-B0,4-A3P: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-191-5695
Handwheel

121915695
VG85088-A-125X11-RG: RNCC: 2 | RNVC: 2
VG85088-A-125X11-RG: RNCC: 3 | RNVC: 2
VG85088-A-125X11-RG: RNCC: 3 | RNVC: 2
VG85088-A-125X11-RG: RNCC: 3 | RNVC: 9
9-45027-01-04: RNCC: 5 | RNVC: 2
A125X11VG85088RG5: RNCC: 5 | RNVC: 2
A125X11VG85088-GCUSN5ZNPB: RNCC: 5 | RNVC: 9
A125X11VG85088-RG5: RNCC: 5 | RNVC: 9
A125X11VG85088GCUSN5ZNPB: RNCC: 5 | RNVC: 9
A125X11VG85088RG5: RNCC: 5 | RNVC: 9

11 Feb 1982

5340-12-147-6197
Electrical-Mechanical Equipment Post

121476197
0199-27-228-04: RNCC: 3 | RNVC: 2
0338 0914: RNCC: 5 | RNVC: 2
3380914EF0199-27: RNCC: 5 | RNVC: 2
3380914: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-349-4056
Angle Bracket

123494056
590601-0344.000: RNCC: 3 | RNVC: 2
590601-0344.000: RNCC: 5 | RNVC: 2
590601-0344.000: RNCC: 5 | RNVC: 9

10 Nov 1999

5340-12-385-7920
Mechanical Stop

123857920
30-002-01-0050102: RNCC: 3 | RNVC: 2
0050102: RNCC: 5 | RNVC: 2

8 Jul 2011

5340-12-328-4635
Webbing Strap

123284635
2300354-949900.005: RNCC: 2 | RNVC: 2
70701-150030-00: RNCC: 5 | RNVC: 2
70701-150030-00: RNCC: 5 | RNVC: 9

21 May 1992

5340-12-335-6123
Nonmetallic Bumper

123356123
SKP 80X30X6450MM: RNCC: 3 | RNVC: 2
SKP 80X30X6450MM: RNCC: 5 | RNVC: 2
4260-500: RNCC: 5 | RNVC: 2
SCHWING-KAMMER-PROFIL 80X30X6450: RNCC: 5 | RNVC: 2
SKP 80X30X6450: RNCC: 5 | RNVC: 2
8495590460: RNCC: 5 | RNVC: 2
ZN4260-500: RNCC: 5 | RNVC: 2

6 Sep 1994

5340-12-312-7170
Electrical-Mechanical Equipment Post

123127170
615.17-01-02-20-023: RNCC: 3 | RNVC: 2

29 Jan 1988

5340-12-353-1719
Mounting Plate

123531719
160-104050-01: RNCC: 3 | RNVC: 2
160-104050.01: RNCC: 5 | RNVC: 2

6 Feb 2001

5340-12-311-2909
Helical Compression Spring Seat

123112909
302S06012: RNCC: 3 | RNVC: 2

13 Aug 1987

5340-12-342-1705
Mounting Plate

123421705
136A48015: RNCC: 3 | RNVC: 2

20 Dec 1996

5340-12-338-1429
Access Cover

123381429
243.2265: RNCC: 3 | RNVC: 2

29 May 1995

5340-12-365-1190
Access Cover

123651190
4602940092: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-155-7456
Resilient Mount

121557456
410-402-B-00.00: RNCC: 3 | RNVC: 2
80708501: RNCC: 3 | RNVC: 2
410-402B00-00: RNCC: 5 | RNVC: 2
410-402-B-00.00: RNCC: 5 | RNVC: 2
800.410-402B00-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-350-4456
Section Block Clamp

123504456
J29120352-003: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-134-1351
Butt Hinge Leaf

121341351
5565-06-29-22: RNCC: 3 | RNVC: 2
5565-06-29.22: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-701-4650
Loop Clamp

127014650
VG95211-ML-127014650: RNCC: 2 | RNVC: 2
5.12.5314.8150.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5380
Mounting Plate

127025380
VG95211-ML-127025380: RNCC: 2 | RNVC: 2
5.51.7204.1270.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-319-6480
Double Angle Bracket

123196480
42071941: RNCC: 3 | RNVC: 2
42071941KZ5049-04: RNCC: 5 | RNVC: 2

20 Oct 1989

5340-12-340-3955
Retaining Strap

123403955
457-151455.006: RNCC: 3 | RNVC: 2
9 873 683: RNCC: 5 | RNVC: 2

4 Apr 1996

5340-12-369-2161
Spacing Threaded Standoff

123692161
D0046487-001: RNCC: 3 | RNVC: 2

6 Jun 2006

5340-12-338-9070
Mounting Plate

123389070
4900319-201300.00: RNCC: 2 | RNVC: 2
4900319-201300.00: RNCC: 3 | RNVC: 2

6 Sep 1995

5340-12-313-3392
Manual Control Handle

123133392
2300194-181140.000: RNCC: 3 | RNVC: 2
2300194-181140.000: RNCC: 5 | RNVC: 9
9843533: RNCC: 5 | RNVC: 9
2300194-181140.000: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-316-6617
Double Angle Bracket

123166617
51125400179: RNCC: 3 | RNVC: 2
51125400179: RNCC: 3 | RNVC: 2
51.12540-0179: RNCC: 5 | RNVC: 2
51.12540-0179: RNCC: 5 | RNVC: 2

31 Jan 1989

5340-12-360-7799
Cane Bolt

123607799
352609: RNCC: 3 | RNVC: 2
10-0076-621: RNCC: 5 | RNVC: 2

9 Jul 2003

5340-12-333-7846
Manual Control Handle

123337846
315743: RNCC: 3 | RNVC: 2
315 743: RNCC: 5 | RNVC: 2
33A17-0053-02H01: RNCC: 5 | RNVC: 2

7 Feb 1994

5340-12-331-0531
Catch Strike

123310531
55.2509.000.14: RNCC: 2 | RNVC: 2
55.2509.000.14: RNCC: 3 | RNVC: 2

17 Mar 1993

5340-12-358-8015
Mounting Bracket

123588015
J28130133-401: RNCC: 3 | RNVC: 2

18 Nov 2002

5340-12-309-8247
Rim Lock

123098247
6000485: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-12-192-5144
Loop Clamp

121925144
23C: RNCC: 3 | RNVC: 2
5800583-096190.129: RNCC: 5 | RNVC: 2
211-15230: RNCC: 5 | RNVC: 2
5800583-096190.129: RNCC: 5 | RNVC: 9
202019901: RNCC: 5 | RNVC: 9

29 Apr 1982

5340-12-380-2961
Webbing Strap

123802961
601241-204220.00: RNCC: 3 | RNVC: 2

16 Oct 2009

5340-12-172-7565
Pipe Bracket

121727565
23290-204143: RNCC: 2 | RNVC: 2
23290-204143: RNCC: 3 | RNVC: 2
23290-204143: RNCC: 5 | RNVC: 2
23290-204143: RNCC: 5 | RNVC: 9
23290-204143: RNCC: 5 | RNVC: 9

20 Feb 1978

5340-12-350-4041
Retaining Strap

123504041
153-904-02: RNCC: 3 | RNVC: 2
153 904 02: RNCC: 5 | RNVC: 2

28 Mar 2000

5340-12-193-4123
Double Angle Bracket

121934123
490126-34278-01: RNCC: 3 | RNVC: 2

19 Jul 1982

5340-12-196-8576
Loop Clamp

121968576
Z2228-02M10003T2: RNCC: 3 | RNVC: 9

25 Aug 1983

5340-12-300-2395
Bridge Clamp

123002395
16445-01: RNCC: 3 | RNVC: 2

18 Jul 1984

5340-12-701-3225
Mounting Plate

127013225
VG95211-ML-127013225: RNCC: 2 | RNVC: 2
5.12.5101.8130.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-8296
Mounting Plate

127018296
5.99.0600.0149.98: RNCC: 3 | RNVC: 2
155.6100-14361: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-310-1445
Angle Bracket

123101445
2500179-194100.019.0: RNCC: 2 | RNVC: 2
2500179-194100.019.0: RNCC: 3 | RNVC: 2

10 Apr 1987

5340-12-192-6354
Loop Clamp

121926354
1404C01: RNCC: 3 | RNVC: 2

11 May 1982

5340-12-323-3719
Electrical-Mechanical Equipment Post

123233719
6010740086: RNCC: 3 | RNVC: 2

20 Nov 1990

5340-12-322-9997
Access Cover

123229997
6731830: RNCC: 2 | RNVC: 2
6731830: RNCC: 3 | RNVC: 2
6731830: RNCC: 5 | RNVC: 9

16 Oct 1990

5340-12-190-4062
Rod End Clevis

121904062
01TC60926T01: RNCC: 3 | RNVC: 2

25 Nov 1981

5340-12-195-3936
Bridge Clamp

121953936
3816520214: RNCC: 3 | RNVC: 2

21 Feb 1983

5340-12-040-1404

5340-12-304-1193

5340-12-199-7542
Support Hook

121997542
1000152-1000.01: RNCC: 2 | RNVC: 2
1640569: RNCC: 3 | RNVC: 2
49.014.10000.01D: RNCC: 5 | RNVC: 9

26 May 1984

5340-12-354-6120
Dust And Moisture Seal Protective Plug

123546120
PL-AK12189PE302GA: RNCC: 3 | RNVC: 2
6.368-203.0: RNCC: 5 | RNVC: 2

8 Aug 2001

5340-12-325-9143
Electrical-Mechanical Equipment Post

123259143
51443-104: RNCC: 3 | RNVC: 2
443-01032-000: RNCC: 5 | RNVC: 2

22 Jul 1991

5340-12-382-1802
Access Cover

123821802
MRL 52 / 2890440-1: RNCC: 3 | RNVC: 2

19 May 2010

5340-12-393-5481
Dust And Moisture Seal Protective Cap

123935481
GPN600B525-RAL3000: RNCC: 3 | RNVC: 2
600 B 525 RGE: RNCC: 5 | RNVC: 1
GPN600B525-RAL3000: RNCC: 5 | RNVC: 2
600B525-RAL3000: RNCC: 5 | RNVC: 2
9610054770: RNCC: 5 | RNVC: 2

24 Sep 2013

5340-12-344-9487
Tee Hinge

123449487
P-295666-403: RNCC: 3 | RNVC: 2
P295666-403: RNCC: 5 | RNVC: 2

14 Jan 1998

5340-12-187-8238
Expansion Plug

121878238
BM-P-897007-001: RNCC: 3 | RNVC: 2
P897007-001: RNCC: 5 | RNVC: 2

13 May 1981

5340-12-199-2300
Catch Strike

121992300
P-896154-001: RNCC: 3 | RNVC: 2
P896154-001: RNCC: 5 | RNVC: 2

5 Apr 1984

5340-12-307-6341
Mending Plate

123076341
A-243796-751: RNCC: 3 | RNVC: 2
A243796-751: RNCC: 5 | RNVC: 2

10 Jul 1986

5340-12-148-3724
Resilient Mount

121483724
80707401: RNCC: 3 | RNVC: 2
410-315-B-00.03: RNCC: 3 | RNVC: 2
410-315-B-00.03: RNCC: 5 | RNVC: 2
410-315B00-03: RNCC: 5 | RNVC: 2
410-315B0003: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-8363
Schlosz Schluessel

123058363
609A069/1020: RNCC: 3 | RNVC: 2
C 3759 103: RNCC: 3 | RNVC: 2
C 3759 103: RNCC: 5 | RNVC: 2

20 Dec 1985

5340-12-311-1678
Angle Bracket

123111678
P-233020-013: RNCC: 3 | RNVC: 2
P233020-013: RNCC: 5 | RNVC: 2

3 Aug 1987

5340-12-365-1492
Mounting Bracket

123651492
2500278-191800.011.0: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-329-4904
Retaining Strap

123294904
DIN1592-15,5X6,6ZN: RNCC: 2 | RNVC: 2
3104006: RNCC: 5 | RNVC: 2
15,5X6,6DIN1592VERZINKT: RNCC: 5 | RNVC: 2

25 Aug 1992

5340-12-155-4262
Retaining Strap

121554262
160-70087-10: RNCC: 3 | RNVC: 2
160-70087-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-7643
Dust And Moisture Seal Protective Cap-Plug

123027643
37 024-011: RNCC: 3 | RNVC: 2
D8S10: RNCC: 5 | RNVC: 2
D8S10: RNCC: 5 | RNVC: 9

29 Jan 1985

5340-12-177-3700
Clamping Catch

121773700
01091-5R: RNCC: 3 | RNVC: 2
5000065238: RNCC: 5 | RNVC: 2
500065238: RNCC: 5 | RNVC: 2
8165802-003: RNCC: 5 | RNVC: 2
5000065238: RNCC: 5 | RNVC: 9
500065238: RNCC: 5 | RNVC: 9

29 Jan 1979

5340-12-347-1735
Mounting Bracket

123471735
2300002-062841.000: RNCC: 2 | RNVC: 2
9916586: RNCC: 3 | RNVC: 2
2300002-062841.000: RNCC: 5 | RNVC: 2
2300002-062841.000: RNCC: 5 | RNVC: 9
9916586: RNCC: 5 | RNVC: 9

6 Nov 1998

5340-12-340-9982
Access Door Hinge

123409982
8600 3322: RNCC: 3 | RNVC: 2
86003322EY5507-00: RNCC: 5 | RNVC: 2
86003322: RNCC: 5 | RNVC: 2

13 Jul 1996

5340-12-315-7944
Access Cover

123157944
51981120081: RNCC: 3 | RNVC: 2
51.98112-0081: RNCC: 5 | RNVC: 2

26 Nov 1988

5340-12-702-1719
Mounting Bracket

127021719
VG95211-ML-127021719: RNCC: 2 | RNVC: 2
30.7143.180: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-390-4590
Turnbuckle Body

123904590
DIN1479-SP-M6-A4-50: RNCC: 2 | RNVC: 2

14 Nov 2012

5340-12-701-8466
Loop Clamp

127018466
VG95211-ML-127018466: RNCC: 2 | RNVC: 2
5156A-12: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-337-0828
Clamping Catch

123370828
81669016003: RNCC: 3 | RNVC: 2
VG95136A34X35A4C-LACKIERTRAL6031: RNCC: 5 | RNVC: 2
81.66901.6003: RNCC: 5 | RNVC: 2

18 Jan 1995

5340-12-383-1742
Access Cover

123831742
SMJ 235-004-101-101-380: RNCC: 3 | RNVC: 2
SMJ235-004-101-101-380: RNCC: 5 | RNVC: 2

22 Sep 2010

5340-12-702-5619
Mounting Bracket

127025619
VG95211-ML-127025619: RNCC: 2 | RNVC: 2
5.51.7601.1560.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-374-6044
Antipilferage Seal

123746044
1137907-00: RNCC: 3 | RNVC: 2

28 Feb 2008

5340-12-196-2657
Lock-Release Lever

121962657
00739900: RNCC: 3 | RNVC: 2

22 Jun 1983

5340-12-310-8947
Loop Clamp

123108947
LN9491A9: RNCC: 2 | RNVC: 2

7 Jul 1987

5340-12-363-4376
Mounting Bracket

123634376
35446250: RNCC: 3 | RNVC: 2

16 Jun 2004

5340-12-366-6522
Mounting Bracket

123666522
946715977: RNCC: 3 | RNVC: 2
3502-102.01.02.001-000: RNCC: 5 | RNVC: 2

19 May 2005

5340-12-346-1527
Loop Clamp

123461527
1202 5982: RNCC: 3 | RNVC: 2
26.656-022/4/01: RNCC: 5 | RNVC: 9

19 Jun 1998

5340-12-304-3406
Angle Bracket

123043406
H4-770198-24/12: RNCC: 3 | RNVC: 2
H4-770198-24/12: RNCC: 5 | RNVC: 9
H4-770198-24/12: RNCC: 5 | RNVC: 9

5 Jul 1985

5340-12-332-6730
Runner

123326730
28789: RNCC: 3 | RNVC: 2

3 Sep 1993

5340-12-135-6531

5340-12-130-1150

5340-12-040-6607

5340-12-351-0390
Angle Bracket

123510390
T672M1035207: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-195-3768
Dust And Moisture Seal Protective Plug

121953768
NO PRIMARY REF 12-195-3768: RNCC: 3 | RNVC: 2
200060: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-12-123-2621
Resilient Mount

121232621
2-01-018712-01: RNCC: 3 | RNVC: 9
33554109: RNCC: 5 | RNVC: 2
0335 0541: RNCC: 5 | RNVC: 2
3350541EE5091-54: RNCC: 5 | RNVC: 2
33554109: RNCC: 5 | RNVC: 2
G18712-01: RNCC: 5 | RNVC: 9
3350541: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-331-2438
Mending Plate

123312438
1201000357: RNCC: 3 | RNVC: 2
467-418/5183-03-00-05: RNCC: 5 | RNVC: 2

7 Apr 1993

5340-12-125-5315
Handwheel

121255315
NO PRIMARY REF 12-125-5315: RNCC: 3 | RNVC: 2
0073: RNCC: 5 | RNVC: 9
901E0406: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-378-3938
Retaining Strap

123783938
RSGU2.16/20-W5: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-373-9672
Ball Socket Seat

123739672
DIN71805-B8-A2C: RNCC: 2 | RNVC: 2

3 Jan 2008

5340-12-185-2900
Rim Lock

121852900
1-021-458: RNCC: 3 | RNVC: 2
C3734110: RNCC: 5 | RNVC: 2
C 3734 110: RNCC: 5 | RNVC: 2
C3734110: RNCC: 5 | RNVC: 2
C 3734 110: RNCC: 5 | RNVC: 2

25 Sep 1980

5340-12-372-0419
Mounting Bracket

123720419
S282M4020102: RNCC: 2 | RNVC: 2
S282M4020102: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-12-317-0004
Rod End Clevis

123170004
2300279-7117.00: RNCC: 2 | RNVC: 2
2300279-7117.00: RNCC: 3 | RNVC: 2
2300279-7117.00: RNCC: 5 | RNVC: 9

2 Mar 1989

5340-12-043-7098

5340-12-199-3336
Butt Hinge

121993336
NO PRIMARY REF 12-199-3336: RNCC: 3 | RNVC: 2
354336: RNCC: 5 | RNVC: 2
720-50MM-R-VERCHROOMT MATT: RNCC: 5 | RNVC: 9
720-50MM-R-VERCHROMT MATT: RNCC: 5 | RNVC: 9

12 Apr 1984

5340-12-306-3376
Resilient Mount

123063376
DIN95363-C125X60-NR70ST: RNCC: 2 | RNVC: 2
1.125.60.2.70NR/ST: RNCC: 5 | RNVC: 2
81120-125X60-M16.NR70.ST: RNCC: 5 | RNVC: 2
811.020.125.060.16.NR70.ST: RNCC: 5 | RNVC: 2
VG95363-C125X60-NR70ST: RNCC: 5 | RNVC: 9

20 Feb 1986

5340-12-344-6968
Access Cover

123446968
2300311-221510.000.0: RNCC: 2 | RNVC: 2
2300311-221510.000.0: RNCC: 3 | RNVC: 2

1 Dec 1997

5340-12-701-1706
Mounting Bracket

127011706
VG95211-ML-127011706: RNCC: 2 | RNVC: 2
5.12.0238.1013.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-355-9544
Dust And Moisture Seal Protective Cap

123559544
SW5,5-1-G7/H4, SCHWARZ: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-359-1706
Mounting Bracket

123591706
2500262-199200.002.0: RNCC: 2 | RNVC: 2
2500262-199200.002.0: RNCC: 3 | RNVC: 2

8 Jan 2003

5340-12-194-1791
Nonmetallic Bumper

121941791
8-2490.06: RNCC: 2 | RNVC: 2
8-2490-06: RNCC: 2 | RNVC: 2
8-2490.06: RNCC: 3 | RNVC: 9
8-2490-06: RNCC: 5 | RNVC: 2
8-2490.06: RNCC: 5 | RNVC: 9
8-2490-06: RNCC: 5 | RNVC: 9
8-2490-06: RNCC: 5 | RNVC: 9
9842465: RNCC: 5 | RNVC: 9

7 Oct 1982

5340-12-315-3909
Angle Bracket

123153909
100314-1000.02: RNCC: 2 | RNVC: 2
100314-1000.02: RNCC: 3 | RNVC: 2

19 Oct 1988

5340-12-198-2690
Lock-Release Lever

121982690
4312 711 26060: RNCC: 3 | RNVC: 2
4900215-211210: RNCC: 5 | RNVC: 9

6 Jan 1984

5340-12-199-4203
Mending Plate

121994203
2300088-713006.00: RNCC: 2 | RNVC: 2
2300088-713006-00: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-330-2255
Resilient Mount

123302255
E1H 43-02 ED: RNCC: 3 | RNVC: 2
E1H43-02ED: RNCC: 5 | RNVC: 2

18 Nov 1992

5340-12-341-7843
Butt Hinge Leaf

123417843
160-74287-07: RNCC: 3 | RNVC: 2
15160-74287.07: RNCC: 5 | RNVC: 2
160-74287-07: RNCC: 5 | RNVC: 9

26 Oct 1996

5340-12-389-0641
Expansion Shield

123890641
NO PRIMARY REF 12-389-0641: RNCC: 3 | RNVC: 2
924181: RNCC: 5 | RNVC: 2
2500600741: RNCC: 5 | RNVC: 2
924181: RNCC: 5 | RNVC: 2

23 May 2012

5340-12-331-5115
Runner

123315115
U100-3231-002: RNCC: 2 | RNVC: 2
U100-3231-002: RNCC: 3 | RNVC: 2

12 May 1993

5340-12-303-8141
Spring Tension Clip

123038141
6100127-0000.02: RNCC: 2 | RNVC: 2
8791290005: RNCC: 3 | RNVC: 9
8791290005: RNCC: 5 | RNVC: 9

6 May 1985

5340-12-136-6635
Rod End Connector

121366635
2526-0107-03: RNCC: 2 | RNVC: 2
2526-0107-03: RNCC: 5 | RNVC: 2
2526-0107-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-145-9187
Retaining Strap

121459187
DIN72573-3X10-ST-VERZINKT: RNCC: 2 | RNVC: 2
DIN72573-3X10-ST-VERZINKT: RNCC: 3 | RNVC: 2
BSL3X10/72573VPE: RNCC: 3 | RNVC: 2
DIN72573-3X10-ST-VERZINKT: RNCC: 3 | RNVC: 2
DIN72573-3X10-ST-GALZN8: RNCC: 5 | RNVC: 2
3X10DIN72573STVERZINKT: RNCC: 5 | RNVC: 2
3X10DIN72573STVZK: RNCC: 5 | RNVC: 2
DIN72573-3X10-ST-GALZN8: RNCC: 5 | RNVC: 2
5128980310: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-176-3265
Loop Clamp

121763265
PAN4263-32: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-309-0413
Double Angle Bracket

123090413
5803561-000012.04: RNCC: 2 | RNVC: 2
7400085-1212.04: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-12-346-3167
Mounting Bracket

123463167
50058400047: RNCC: 3 | RNVC: 2
50.05840-0047: RNCC: 5 | RNVC: 2
50.97480-0567: RNCC: 5 | RNVC: 9

9 Jul 1998

5340-12-172-1052
Spring Tension Clip

121721052
12X24N6633: RNCC: 3 | RNVC: 2
DEF0ESB0LZEN12X24PH0SPHATIERT: RNCC: 3 | RNVC: 2
101100128001/002: RNCC: 3 | RNVC: 2
DEFO-BOLZEN 12X24 PHOSPH.: RNCC: 5 | RNVC: 2
FKB12X24DEFO: RNCC: 5 | RNVC: 2
GGN6633-12X24: RNCC: 5 | RNVC: 2
270210: RNCC: 5 | RNVC: 2

19 Dec 1977

5340-12-313-7256
Angle Bracket

123137256
510252-0114.000: RNCC: 3 | RNVC: 2

29 Apr 1988

5340-12-196-7588
Pad Eye

121967588
P-246052-416: RNCC: 3 | RNVC: 2
P246052-416: RNCC: 5 | RNVC: 2

11 Aug 1983

5340-12-358-4548
Manual Control Lever

123584548
2500262-191620.002.0: RNCC: 2 | RNVC: 2
2500262-191620.002.0: RNCC: 3 | RNVC: 2

18 Oct 2002

5340-12-358-3300
Spring Tension Clip

123583300
2500262-192320.001.0: RNCC: 2 | RNVC: 2
2500262-192320.001.0: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-12-333-8713
Mounting Plate

123338713
405-5-4-2: RNCC: 3 | RNVC: 2
405-5.4.2: RNCC: 5 | RNVC: 2

18 Feb 1994

5340-12-350-5725
Angle Bracket

123505725
6.372-038.0: RNCC: 3 | RNVC: 2
6.372-038: RNCC: 5 | RNVC: 9

17 Apr 2000

5340-12-309-5618
Electrical-Mechanical Equipment Post

123095618
5802255-060000.003: RNCC: 2 | RNVC: 2
5802255-060000.003: RNCC: 5 | RNVC: 9

4 Feb 1987

5340-12-358-8183
Support Hook

123588183
JM0400000H524-002A0: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-332-1478
Mending Plate

123321478
480-7346-02-00-33: RNCC: 3 | RNVC: 2
480/7346-02-00-33: RNCC: 5 | RNVC: 2

22 Jul 1993

5340-12-363-1271
Detent Plunger

123631271
07144-108: RNCC: 3 | RNVC: 2
NLM07144-108: RNCC: 5 | RNVC: 2

6 May 2004

5340-12-353-6860
Multiple Angle Bracket

123536860
J92222233-401: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-136-1171
Butt Hinge

121361171
2512-38.24: RNCC: 2 | RNVC: 2
2512-38.24: RNCC: 3 | RNVC: 2
2512-38-24: RNCC: 5 | RNVC: 9
2512-38.24: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-303-0928
Pad Eye

123030928
37979-02: RNCC: 3 | RNVC: 2

25 Feb 1985

5340-12-187-4717
Angle Bracket

121874717
5801557-2412.00: RNCC: 2 | RNVC: 2
5801557-2412.00: RNCC: 3 | RNVC: 2
5801557-2412: RNCC: 5 | RNVC: 2
5801557-2412: RNCC: 5 | RNVC: 9
5801557-2412.00: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-394-4398
Mounting Bracket

123944398
11.44743-0231: RNCC: 3 | RNVC: 2
11.44743-0231: RNCC: 5 | RNVC: 2

3 Dec 2013

5340-12-319-1575
Butt Hinge Leaf

123191575
2654-332800.00: RNCC: 2 | RNVC: 2
2654-332800.00: RNCC: 3 | RNVC: 2
2654-332 800.00: RNCC: 5 | RNVC: 9
679-02090000: RNCC: 5 | RNVC: 9
679-02090000: RNCC: 5 | RNVC: 9

12 Sep 1989

5340-12-155-2385
Butt Hinge Leaf

121552385
160-26762-09: RNCC: 3 | RNVC: 2
160-26762-09: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-357-5581
Expansion Plug

123575581
DIN443-A16-ST-A3P: RNCC: 2 | RNVC: 2
DIN443-A16-A3P: RNCC: 5 | RNVC: 2

2 Jul 2002

5340-12-164-4620
Nonmetallic Bumper

121644620
23290-121010.002: RNCC: 2 | RNVC: 2
0052050007: RNCC: 3 | RNVC: 2
23290-121010-002: RNCC: 5 | RNVC: 9
23290-121010.002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-700-8529
Loop Clamp

127008529
VG95211-ML-127008529: RNCC: 2 | RNVC: 2
155N1119-499: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-1656
Mounting Bracket

127021656
VG95211-ML-127021656: RNCC: 2 | RNVC: 2
30.7100.1160: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-368-1406
Double Angle Bracket

123681406
J53228667-001: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-12-700-9240
Loop Clamp

127009240
VG95211-ML-127009240: RNCC: 2 | RNVC: 2
200N7-120: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-2091
Hinge Torsion Bar

127002091
51-262283084: RNCC: 2 | RNVC: 2
765-47-630: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-12-357-8501
Manual Control Handle

123578501
L32A300-16: RNCC: 3 | RNVC: 2

1 Aug 2002

5340-12-386-3376
Access Cover

123863376
2-54.60.03-1: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-193-1278
Rod End Clevis

121931278
VG85211-1-6: RNCC: 2 | RNVC: 2
VG85211-1-6: RNCC: 3 | RNVC: 2

23 Jun 1982

5340-12-318-2594
Access Cover

123182594
81066050017: RNCC: 3 | RNVC: 2
81.06605.0017: RNCC: 5 | RNVC: 2

23 Jun 1989

5340-12-365-3319
Mounting Plate

123653319
2500267-195000.001.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-186-5855
Spring Tension Clip

121865855
C22136-A1000-C814: RNCC: 3 | RNVC: 2
C22136A1000C814: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-12-162-5375
Dust And Moisture Seal Protective Plug

121625375
311405381: RNCC: 3 | RNVC: 2
8082-816: RNCC: 5 | RNVC: 2
8082816: RNCC: 5 | RNVC: 2
8430928: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-370-2104
Fuehrungss Gleiter

123702104
NW-02-80: RNCC: 3 | RNVC: 2

4 Oct 2006

5340-12-319-2053
Mounting Bracket

123192053
4900064-41215: RNCC: 3 | RNVC: 2

13 Sep 1989

5340-12-326-3316
Retaining Clip

123263316
2300232-184200.004.0: RNCC: 2 | RNVC: 2
2300232-184200.004.0: RNCC: 3 | RNVC: 2

2 Sep 1991

5340-12-350-1277
Rod End Clevis

123501277
2300348-183220.003.0: RNCC: 2 | RNVC: 2
2300348-183220.003.0: RNCC: 3 | RNVC: 2

17 Feb 2000

5340-12-317-8831
Strap Hinge Leaf

123178831
1000192-01 4 10300: RNCC: 2 | RNVC: 2
1000192-01 4 10300: RNCC: 3 | RNVC: 2
1000192-01 4 10300: RNCC: 5 | RNVC: 9

23 May 1989

5340-12-318-0642
Electrical-Mechanical Equipment Post

123180642
S36133-01-2-238: RNCC: 3 | RNVC: 2

8 Jun 1989

5340-12-703-3036
Mounting Bracket

127033036
VG95211-ML-127033036: RNCC: 2 | RNVC: 2
5.12.0400.1060.00: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-378-7585
Handwheel

123787585
VG85080-1-B125X11-3.3561.01: RNCC: 2 | RNVC: 2

11 May 2009

5340-12-328-0211
Manual Control Handle

123280211
2300232-188120.003.0: RNCC: 2 | RNVC: 2
2300232-188120.003.0: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-12-701-6117
Double Angle Bracket

127016117
VG95211-ML-127016117: RNCC: 2 | RNVC: 2
5.12.7010.1440.06: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-198-5078
Retaining Strap

121985078
86-1559-201300.002.0: RNCC: 3 | RNVC: 2
86-1559-201300.002.0: RNCC: 5 | RNVC: 9

3 Feb 1984

5340-12-359-4372
Loop Clamp

123594372
DIN3016-1-E1-7X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-323-9070
Access Cover

123239070
54.2544.566.00: RNCC: 2 | RNVC: 2
54.2544.566.00: RNCC: 3 | RNVC: 2

8 Jan 1991

5340-12-381-7004
Door Holder

123817004
S221M7021102: RNCC: 3 | RNVC: 2

18 Mar 2010

5340-12-394-0766
Dust And Moisture Seal Protective Cap

123940766
CTP40490P003: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-12-391-2785
Bumper

123912785
U4960: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-12-311-9390
Nonmetallic Solid Wheel

123119390
288144277: RNCC: 3 | RNVC: 2
3332-450.04.01.004-001: RNCC: 5 | RNVC: 2

2 Nov 1987

5340-12-197-5402
Double Angle Bracket

121975402
C22117-A326-C6: RNCC: 3 | RNVC: 2

28 Oct 1983

5340-12-355-4168
Access Cover

123554168
1762-130124.000.0: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-12-393-4964
Mending Plate

123934964
A-0261-006-10: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-177-9002
Angle Bracket

121779002
2300002-187200.001: RNCC: 2 | RNVC: 2
2300002-187200.001: RNCC: 3 | RNVC: 2
2300002-187200-001: RNCC: 5 | RNVC: 9
2300002-187200.001: RNCC: 5 | RNVC: 9

7 Mar 1979

5340-12-359-1708
Mounting Plate

123591708
2500262-002000.000.0: RNCC: 2 | RNVC: 2
2500262-002000.000.0: RNCC: 3 | RNVC: 2

8 Jan 2003

5340-12-184-7237
Mending Plate

121847237
CF 429 254 B: RNCC: 3 | RNVC: 2
CF 429 254 B: RNCC: 5 | RNVC: 2
CF 429 254 A: RNCC: 5 | RNVC: 9
CF429254A: RNCC: 5 | RNVC: 9
CF 429 254 A: RNCC: 5 | RNVC: 9
CF429254A: RNCC: 5 | RNVC: 9

14 Aug 1980

5340-12-343-7840
Double Angle Bracket

123437840
5032870040: RNCC: 3 | RNVC: 2
503 287 00 40: RNCC: 5 | RNVC: 2

28 Jul 1997

5340-12-379-9720
Manual Control Lever

123799720
58290285: RNCC: 3 | RNVC: 2
CV169190: RNCC: 5 | RNVC: 2
58290285: RNCC: 5 | RNVC: 2

16 Sep 2009

5340-12-367-5255
Mounting Bracket

123675255
701611838: RNCC: 3 | RNVC: 2

29 Aug 2005

5340-12-355-6458
Angle Bracket

123556458
01TC60945: RNCC: 3 | RNVC: 2

30 Nov 2001

5340-12-367-4345
Angle Bracket

123674345
5840720340: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-12-041-2368

5340-12-026-6109

5340-12-192-9261
Escutcheon Plate

121929261
TE 2-2744-001: RNCC: 3 | RNVC: 2
3097660225: RNCC: 5 | RNVC: 2
3097660225: RNCC: 5 | RNVC: 2
3097660225: RNCC: 5 | RNVC: 2
30976602259007: RNCC: 5 | RNVC: 2
8722-18: RNCC: 5 | RNVC: 2
9223385580: RNCC: 5 | RNVC: 2

7 Jun 1982

5340-12-701-2404
Angle Bracket

127012404
VG95211-ML-127012404: RNCC: 2 | RNVC: 2
5.12.3000.2003.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-145-6171
Hand Crank

121456171
23176-261740.00.0: RNCC: 2 | RNVC: 2
23176-261740.00.0: RNCC: 3 | RNVC: 2
23176-261740-00-0: RNCC: 5 | RNVC: 9
23176-261740.00.0: RNCC: 5 | RNVC: 9
23176-261740-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-333-8839
Mounting Bracket

123338839
406-1-2-1: RNCC: 3 | RNVC: 2
406-1.2.1: RNCC: 5 | RNVC: 2

21 Feb 1994

5340-12-353-3628
Loop Clamp

123533628
RBN3-325: RNCC: 3 | RNVC: 2
RBN 3-325: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-12-334-2740
Flush Lock

123342740
2416Z-LINKS: RNCC: 3 | RNVC: 2
GSV2416Z-LINKS: RNCC: 5 | RNVC: 2
GSV2416Z/LEFTHAND: RNCC: 5 | RNVC: 2
2416Z 3 POINT LOCK LEFT HAND: RNCC: 5 | RNVC: 2
GSV2416Z/LEFTHAND: RNCC: 5 | RNVC: 2

20 Apr 1994

5340-12-327-9516
Mounting Bracket

123279516
5600023-190120.000.0: RNCC: 2 | RNVC: 2
5600023-190120.000.0: RNCC: 3 | RNVC: 2
1271574: RNCC: 5 | RNVC: 2

21 Mar 1992

5340-12-329-5779
Spring Tension Clip

123295779
111 994: RNCC: 3 | RNVC: 2
114-100.0017.0: RNCC: 5 | RNVC: 2
31841-111994: RNCC: 5 | RNVC: 2
KLEMMFEDER C18X10ZN5401: RNCC: 5 | RNVC: 2
C18X10ZN5401: RNCC: 5 | RNVC: 2

2 Sep 1992

5340-12-350-5560
Mounting Bracket

123505560
2500239-120310.000.0: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-12-320-6903
Dust And Moisture Seal Protective Plug

123206903
7408.0.07.00: RNCC: 3 | RNVC: 2
260Q3030: RNCC: 3 | RNVC: 2
V30X30L,86SCHWARZ: RNCC: 3 | RNVC: 2
6.368-104.0: RNCC: 5 | RNVC: 2
GPN260Q3030: RNCC: 5 | RNVC: 2
329 0007: RNCC: 5 | RNVC: 2
6.368-104: RNCC: 5 | RNVC: 9

7 Feb 1990

5340-12-329-9277
Plug Button

123299277
968.324.01: RNCC: 3 | RNVC: 2
96832401: RNCC: 5 | RNVC: 2
968-324: RNCC: 5 | RNVC: 9

14 Oct 1992

5340-12-187-4693
Angle Bracket

121874693
V22.498.7712-02: RNCC: 3 | RNVC: 2
V22-498-7712-02: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-323-4498
Mounting Bracket

123234498
NO PRIMARY REF 12-323-4498: RNCC: 3 | RNVC: 2
3612540027: RNCC: 5 | RNVC: 9

27 Nov 1990

5340-12-194-8074
Handle Grip

121948074
222921: RNCC: 3 | RNVC: 9
9231/102-320: RNCC: 3 | RNVC: 9
222 507: RNCC: 5 | RNVC: 9
222507: RNCC: 5 | RNVC: 9
9231/001-320: RNCC: 5 | RNVC: 9

8 Dec 1982

5340-12-331-5112
Runner

123315112
U100-3220-004: RNCC: 2 | RNVC: 2
U100-3220-004: RNCC: 3 | RNVC: 2

12 May 1993

5340-12-155-4827
Spring Tension Clip

121554827
160-74494-02: RNCC: 3 | RNVC: 2
160-74494-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-177-2770
Butt Hinge

121772770
81972010157: RNCC: 3 | RNVC: 2
81.97201-0157: RNCC: 5 | RNVC: 2
23230-237605-003-0: RNCC: 5 | RNVC: 9
23230-237605.003.0: RNCC: 5 | RNVC: 9

24 Jan 1979

5340-12-316-0896
Mounting Bracket

123160896
P-M25027-003: RNCC: 3 | RNVC: 2
PM25027-003: RNCC: 5 | RNVC: 2

21 Dec 1988

5340-12-702-9356
Line Supporting Strap

127029356
VG95211-ML-127029356: RNCC: 2 | RNVC: 2
N29-2: RNCC: 3 | RNVC: 2
0500800302159: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-383-7601
Spring Tension Clip

123837601
S80613-00: RNCC: 3 | RNVC: 2

6 Dec 2010

5340-12-171-8113
Retaining Strap

121718113
DIN1596-31ZN: RNCC: 2 | RNVC: 2
DIN1596-31ZN: RNCC: 3 | RNVC: 2
DIN1596-31ZN: RNCC: 3 | RNVC: 2
DIN1596-31ZN: RNCC: 5 | RNVC: 2
DIN1596-31ZN: RNCC: 5 | RNVC: 2
DIN1596-31: RNCC: 5 | RNVC: 9
DIN1596-31BK: RNCC: 5 | RNVC: 9
31DIN1596: RNCC: 5 | RNVC: 9
DIN1596-31: RNCC: 5 | RNVC: 9
DIN1596-31BK: RNCC: 5 | RNVC: 9

18 Nov 1977

5340-12-341-7229
Resilient Mount Adapter

123417229
3-410.0100: RNCC: 3 | RNVC: 2
3-410.0100: RNCC: 5 | RNVC: 2

18 Oct 1996

5340-12-339-0972
Butt Hinge

123390972
4-194-75MM: RNCC: 3 | RNVC: 2

10 Oct 1995

5340-12-327-4360
Mounting Bracket

123274360
076-320040-901-0: RNCC: 2 | RNVC: 2
076-320040-901-0: RNCC: 3 | RNVC: 2

22 Jan 1992

5340-12-309-8886
Loop Clamp

123098886
E32-823140B00F: RNCC: 3 | RNVC: 2

16 Mar 1987

5340-12-382-1726
Angle Bracket

123821726
5232030043: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-319-8667
Shimmy Damper

123198667
094870: RNCC: 3 | RNVC: 2

10 Nov 1989

Load More Results