What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 18 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 18 of 178

5340-12-702-5407
Loop Clamp

127025407
VG95211-ML-127025407: RNCC: 2 | RNVC: 2
5.51.7208.0103.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-304-7536
Rod End Clevis

123047536
P-896150-001: RNCC: 3 | RNVC: 2
P896150-001: RNCC: 5 | RNVC: 2

19 Aug 1985

5340-12-359-3600
Mounting Bracket

123593600
SK688-131030.000.0: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-701-4552
Loop Clamp

127014552
VG95211-ML-127014552: RNCC: 2 | RNVC: 2
5.12.5314.1001.99: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7398
Loop Clamp

127017398
VG95211-ML-127017398: RNCC: 2 | RNVC: 2
5.12.7611.0033.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-8013
Dust And Moisture Seal Protective Cap

123428013
5014-050: RNCC: 3 | RNVC: 2

2 Apr 1997

5340-12-360-4128
Mounting Bracket

123604128
3516160516: RNCC: 3 | RNVC: 2
3516160516: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-324-3800
Manual Control Lever

123243800
2375346: RNCC: 3 | RNVC: 2
3505.127.01.01.010: RNCC: 5 | RNVC: 2
2375346: RNCC: 5 | RNVC: 2
FBU6211: RNCC: 5 | RNVC: 2

11 Feb 1991

5340-12-383-5952
Retaining Strap

123835952
865306403: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-12-356-1237
Manual Control Handle

123561237
2339-240320A00C: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-392-6606
Metal Runner

123926606
3557-40100: RNCC: 3 | RNVC: 2

26 Jun 2013

5340-12-136-3557
Retaining Strap

121363557
269011050068: RNCC: 3 | RNVC: 2
269011050068: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-8852
Retaining Band

121968852
0110A100261/1-11: RNCC: 3 | RNVC: 2

29 Aug 1983

5340-12-365-7110
Multiple Angle Bracket

123657110
9438840015: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-302-9219
Nonmetallic Bumper

123029219
70578: RNCC: 3 | RNVC: 2

8 Feb 1985

5340-12-356-0050
Spring Tension Clip

123560050
0004280673: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-12-358-5992
Door Button

123585992
62710230: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-382-6905
Mounting Plate

123826905
43668: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-12-393-0218
Snap Hook

123930218
2210010125AA: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-324-0772
Permanent Magnet

123240772
H32: RNCC: 3 | RNVC: 2
SZ9337.32: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-12-356-6955
Hinge Torsion Bar

123566955
027518901: RNCC: 3 | RNVC: 2
027518901: RNCC: 5 | RNVC: 2
027518901: RNCC: 5 | RNVC: 9

26 Mar 2002

5340-12-307-9467
Buckle

123079467
8-4242.03: RNCC: 2 | RNVC: 2
8-4242.03: RNCC: 3 | RNVC: 2
8-4242.03: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-369-4443
Mending Plate

123694443
862910303: RNCC: 3 | RNVC: 2

5 Jul 2006

5340-12-371-3156
Loop Clamp

123713156
945313: RNCC: 3 | RNVC: 2

14 Mar 2007

5340-12-376-2015
Retaining Clip

123762015
6901505: RNCC: 3 | RNVC: 2

25 Aug 2008

5340-12-344-7501
Mounting Plate

123447501
5560160189: RNCC: 3 | RNVC: 2
556 016 01 89: RNCC: 5 | RNVC: 2

4 Dec 1997

5340-12-345-7960
Access Cover

123457960
272.496.386: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-12-357-7996
Manual Control Lever

123577996
864005004: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-12-358-0098
Turnbuckle

123580098
862908901: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-314-5387
Access Cover

123145387
1152773703: RNCC: 3 | RNVC: 2
4536226-779: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-317-7645
Mounting Bracket

123177645
1000192-06 0 60000.02: RNCC: 2 | RNVC: 2
1000192-06 0 60000.02: RNCC: 3 | RNVC: 2
1000192-06 0 60000.02: RNCC: 5 | RNVC: 9
1000192-06060000.02: RNCC: 5 | RNVC: 9

11 May 1989

5340-12-177-4078
Mounting Bracket

121774078
4139 348 018: RNCC: 3 | RNVC: 2
4139348018: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-315-8508
Dust And Moisture Seal Protective Plug

123158508
1463203429: RNCC: 3 | RNVC: 2
1463203429: RNCC: 5 | RNVC: 2
1463203404: RNCC: 5 | RNVC: 9

1 Dec 1988

5340-12-316-9126
Mending Plate

123169126
062232: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-12-336-5448
Retaining Strap

123365448
758652: RNCC: 3 | RNVC: 2
77.0230: RNCC: 5 | RNVC: 2
0745254018: RNCC: 5 | RNVC: 2
50008991-2: RNCC: 5 | RNVC: 2

24 Nov 1994

5340-12-409-3065

5340-12-346-5816
Strap Hinge

123465816
5052-180302002: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-12-354-8325
Mounting Bracket

123548325
5400049-111826.00: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-366-0849
Padlock

123660849
65/40: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-12-311-3553
Angle Bracket

123113553
VD-41-91-00110-045: RNCC: 3 | RNVC: 2
VD-41-91-00110-045: RNCC: 5 | RNVC: 2
VD-41-91-00110-045: RNCC: 5 | RNVC: 9

21 Aug 1987

5340-12-354-8344
Rigid Caster

123548344
5400049-116812.03: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-701-9916
Loop Clamp

127019916
VG95211-ML-127019916: RNCC: 2 | RNVC: 2
155N464-282: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-177-1615
Nonmetallic Bumper

121771615
3814920082: RNCC: 3 | RNVC: 2
1711-46: RNCC: 5 | RNVC: 2
9636253680: RNCC: 5 | RNVC: 2
MGW741026SK4: RNCC: 5 | RNVC: 9

17 Jan 1979

5340-12-387-6245
Mounting Bracket

123876245
9999261-752000.006.0: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-12-701-7107
Mounting Bracket

127017107
VG95211-ML-127017107: RNCC: 2 | RNVC: 2
5.12.7601.2473.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-305-2574
Mending Plate

123052574
4900059-211424.000.0/3: RNCC: 3 | RNVC: 2
4900059-211424.003.0: RNCC: 5 | RNVC: 2

15 Oct 1985

5340-12-153-3691
Resilient Mount

121533691
DIN95363-C50X50-NR45AMST: RNCC: 2 | RNVC: 2
520030-M10.NR45.AMST: RNCC: 5 | RNVC: 2
520030.NR45.AMST: RNCC: 5 | RNVC: 2
781095WEICHAMAGNETISCH: RNCC: 5 | RNVC: 2
VG95363-C50X50-NR45AMST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-125-2264
Loop Clamp

121252264
DIN3016-1-D1-15X9-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-15X9-W1-2: RNCC: 3 | RNVC: 2
RSGU1.15/9: RNCC: 3 | RNVC: 2
9410009015: RNCC: 5 | RNVC: 2
RSGU1100-15-9: RNCC: 5 | RNVC: 2
RSGU1100.15/9: RNCC: 5 | RNVC: 2
DIN3016-D1-15X9-W1-2: RNCC: 5 | RNVC: 9
VG95931-D15X9-W1: RNCC: 5 | RNVC: 9
VG95931D15X9W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-383-5795
Nonmetallic Solid Wheel

123835795
100814: RNCC: 3 | RNVC: 2
KS250/58/5G: RNCC: 5 | RNVC: 2
FS0000850: RNCC: 6 | RNVC: 9

10 Nov 2010

5340-12-346-9940
Access Cover

123469940
324555335-WE7020/2/GA-B50A: RNCC: 3 | RNVC: 2
WE7020/2/GA-B50A: RNCC: 5 | RNVC: 2
WE7020/2/GA-B50A: RNCC: 5 | RNVC: 2

8 Oct 1998

5340-12-142-8521
Loop Clamp

121428521
0009952444: RNCC: 2 | RNVC: 2
0009952444: RNCC: 3 | RNVC: 2
4608677046: RNCC: 5 | RNVC: 2
RSGU677-046-20: RNCC: 5 | RNVC: 2
RSGU8677-46/20: RNCC: 5 | RNVC: 2
RSGU8677.46/20: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-181-7780
Nonmetallic Bumper

121817780
VG95092B15X5PUR90: RNCC: 2 | RNVC: 2
82200-B15X5.PUR90: RNCC: 3 | RNVC: 2
4.59B: RNCC: 3 | RNVC: 2
007-5578P0LYURETHAN90SH0REA: RNCC: 3 | RNVC: 2
B15X5.90PUR: RNCC: 5 | RNVC: 2
4-59B: RNCC: 5 | RNVC: 2
4-59B: RNCC: 5 | RNVC: 9

14 Dec 1979

5340-12-307-5175
Spring Tension Clip

123075175
TL4210-0113-810: RNCC: 2 | RNVC: 2
4242-0.03: RNCC: 3 | RNVC: 2
4242-0.03: RNCC: 3 | RNVC: 2
4242-0.03: RNCC: 5 | RNVC: 2
4242-0-03: RNCC: 5 | RNVC: 9

26 Jun 1986

5340-12-371-4659
Angle Bracket

123714659
23302-142000.13: RNCC: 2 | RNVC: 2
23302-142000.13: RNCC: 3 | RNVC: 2
3-1121-582: RNCC: 5 | RNVC: 2
8406762: RNCC: 5 | RNVC: 2

3 Apr 2007

5340-12-334-4185
Mounting Bracket

123344185
702-241500-979-0: RNCC: 3 | RNVC: 2

5 May 1994

5340-12-374-4923
Butt Hinge

123744923
1056-U17-PH: RNCC: 3 | RNVC: 2

21 Feb 2008

5340-12-300-1509
Electrical-Mechanical Equipment Post

123001509
NO PRIMARY REF 12-300-1509: RNCC: 3 | RNVC: 2
7801 161880: RNCC: 5 | RNVC: 9

7 Jul 1984

5340-12-144-8736
Butt Hinge Leaf

121448736
B25X3X672HAN16515W3355-7SWEL0X: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-334-6655
Retaining Strap

123346655
1202 9898: RNCC: 3 | RNVC: 2
12029898EE0111-90: RNCC: 5 | RNVC: 2
3.601.0.977.009.4: RNCC: 5 | RNVC: 9

8 Jun 1994

5340-12-365-1495
Mounting Bracket

123651495
2500267-000310.009.0: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-321-9424
Metal Runner

123219424
702-241400-952-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-702-1165
Mounting Plate

127021165
VG95211-ML-127021165: RNCC: 2 | RNVC: 2
30.5314.21: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-131-7480
Turnbuckle

121317480
DIN82004-C2-MS-SPMU AUGEN-STZN: RNCC: 2 | RNVC: 2
DIN82004-C2-ZN-MIT MS-SPMU: RNCC: 3 | RNVC: 2
DIN-HNALG4-C2-ZN-MIT MS-SPMU: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-306-7184
Threaded Rod End

123067184
250222-0140.02: RNCC: 2 | RNVC: 2
250222-0140.02: RNCC: 3 | RNVC: 2

24 Mar 1986

5340-12-319-7477
Electrical-Mechanical Equipment Post

123197477
VG95148B6XM3X8-NRST: RNCC: 2 | RNVC: 2
VG95148B6XM3X8-NRST: RNCC: 3 | RNVC: 2
C121-A44-C35: RNCC: 5 | RNVC: 2

31 Oct 1989

5340-12-384-2322
Mounting Bracket

123842322
SK976-977240.001.0: RNCC: 3 | RNVC: 2

4 Feb 2011

5340-12-701-6282
Mounting Bracket

127016282
VG95211-ML-127016282: RNCC: 2 | RNVC: 2
5.12.7050.0010.13: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-390-4442
Angle Bracket

123904442
SK1018-001200.003.0: RNCC: 3 | RNVC: 2
7099398: RNCC: 5 | RNVC: 2

13 Nov 2012

5340-12-145-7447
Loop Clamp

121457447
A10-75-568-00-0: RNCC: 3 | RNVC: 2
A10-75-568-00-0: RNCC: 5 | RNVC: 2
A10-75-568-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-181-6661
Loop Clamp

121816661
87-355: RNCC: 3 | RNVC: 2
90-14443-7: RNCC: 5 | RNVC: 2

10 Dec 1979

5340-12-339-0512
Mounting Bracket

123390512
543K0033-003-01.2: RNCC: 3 | RNVC: 2
0008682614: RNCC: 5 | RNVC: 2

4 Oct 1995

5340-12-173-1500
Plain Solid Disk

121731500
116-100-0451-001: RNCC: 3 | RNVC: 2

22 Mar 1978

5340-12-181-7313
Retaining Strap

121817313
2300033-540200.02: RNCC: 2 | RNVC: 2
2300033-540200.02: RNCC: 5 | RNVC: 9
FTW302-05-07-03-25: RNCC: 5 | RNVC: 9
2300033-540200-02: RNCC: 5 | RNVC: 9
2300033-540200.02: RNCC: 5 | RNVC: 9

12 Dec 1979

5340-12-384-0786
Access Cover

123840786
598104-000020.000.0: RNCC: 2 | RNVC: 2
598104-000020.000.0: RNCC: 3 | RNVC: 2

19 Jan 2011

5340-12-371-4668
Angle Bracket

123714668
23302-062000.09: RNCC: 2 | RNVC: 2
23302-062000.09: RNCC: 3 | RNVC: 2
3-1778-424: RNCC: 5 | RNVC: 2
8520338: RNCC: 5 | RNVC: 2

3 Apr 2007

5340-12-360-3969
Cushioning Pad

123603969
LN9108-5.5601.1-1X30X70: RNCC: 2 | RNVC: 2

16 May 2003

5340-12-354-8268
Manual Control Handle

123548268
1000276-02 0 31710: RNCC: 2 | RNVC: 2
1000276-02 0 31710: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-702-4256
Loop Clamp

127024256
VG95211-ML-127024256: RNCC: 2 | RNVC: 2
5.12.7222.8004.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-355-2414
Mounting Bracket

123552414
2300231-030700.002.0: RNCC: 2 | RNVC: 2
2300231-030700.002.0: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-12-151-0536
Door Handle

121510536
5800002: RNCC: 3 | RNVC: 2
1918-915510-027: RNCC: 5 | RNVC: 2
30429: RNCC: 5 | RNVC: 2
13KA6: RNCC: 5 | RNVC: 2
580 0002: RNCC: 5 | RNVC: 2
BOF 20933: RNCC: 5 | RNVC: 2
580 0002: RNCC: 5 | RNVC: 2
STC2434: RNCC: 5 | RNVC: 2
1918-915510-027: RNCC: 5 | RNVC: 9
1918-915510.027: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-314-7541
Hand Crank

123147541
42161-28000.01: RNCC: 3 | RNVC: 2

6 Aug 1988

5340-12-391-5234
Extension Drawer Slide

123915234
69000-276: RNCC: 3 | RNVC: 2

18 Mar 2013

5340-12-701-4528
Mounting Plate

127014528
VG95211-ML-127014528: RNCC: 2 | RNVC: 2
5.12.5314.1000.24: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-5017
Ball Socket Seat

121875017
023-130000-06-0: RNCC: 3 | RNVC: 2

10 Apr 1981

5340-12-181-1066
Pawl Fastener

121811066
81626806061: RNCC: 3 | RNVC: 2
21-029-600-3: RNCC: 5 | RNVC: 2

24 Oct 1979

5340-12-702-4149
Manual Control Handle

127024149
VG95211-ML-127024149: RNCC: 2 | RNVC: 2
5.12.6501.1560.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-326-5214
Angle Bracket

123265214
2300232-184900.004.0: RNCC: 2 | RNVC: 2
2300232-184900.004.0: RNCC: 3 | RNVC: 2

30 Sep 1991

5340-12-701-4416
Mounting Bracket

127014416
VG95211-ML-127014416: RNCC: 2 | RNVC: 2
5.12.5313.8110.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-190-8199
Nonmetallic Bumper

121908199
1059683009: RNCC: 3 | RNVC: 2
21055BANSM550: RNCC: 5 | RNVC: 2
S9/0405 POS. 6: RNCC: 5 | RNVC: 2

16 Dec 1981

5340-12-353-5560
Flush Lock

123535560
1109-U8-N: RNCC: 3 | RNVC: 2
CAE00526: RNCC: 5 | RNVC: 2

6 Apr 2001

5340-12-702-2053
Mounting Bracket

127022053
VG95211-ML-127022053: RNCC: 2 | RNVC: 2
30.7211.320: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-326-7234
Retaining Strap

123267234
2300194-181200.008: RNCC: 2 | RNVC: 2
2300194-181200.008: RNCC: 3 | RNVC: 2
2300194-181200.008: RNCC: 3 | RNVC: 2
2300194-181200.008: RNCC: 5 | RNVC: 9

23 Oct 1991

5340-12-186-1523
Butt Hinge Leaf

121861523
F01-212310-05-0: RNCC: 3 | RNVC: 2

2 Dec 1980

5340-12-321-0957
Spring Loaded Cylinder Fastener

123210957
2300269-222400.000.0: RNCC: 2 | RNVC: 2
790-52.14.000-25: RNCC: 3 | RNVC: 2

27 Mar 1990

5340-12-381-1788
Loop Clamp

123811788
535/30 PPH-SI-AF M W3: RNCC: 3 | RNVC: 2
21248: RNCC: 5 | RNVC: 2
81675106002: RNCC: 5 | RNVC: 2

18 Jan 2010

5340-12-358-3295
Mounting Plate

123583295
2500262-190000.039.0: RNCC: 2 | RNVC: 2
2500262-190000.039.0: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-12-353-3962
Mechanical Stop

123533962
521-030201.02.0: RNCC: 2 | RNVC: 2
521-030201.02.0: RNCC: 3 | RNVC: 2

20 Mar 2001

5340-12-701-6435
Angle Bracket

127016435
VG95211-ML-127016435: RNCC: 2 | RNVC: 2
5.12.7204.0210.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-3888
Mounting Plate

127013888
VG95211-ML-127013888: RNCC: 2 | RNVC: 2
5.12.5305.3752.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-3674
Rod End Connector

127013674
VG95211-ML-127013674: RNCC: 2 | RNVC: 2
5.12.5302.1580.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-381-0312
Loop Clamp

123810312
DIN3016-D1-25X20-W1-2-EPDM: RNCC: 2 | RNVC: 2
06673002536: RNCC: 5 | RNVC: 2

29 Dec 2009

5340-12-189-5233
Loop Clamp

121895233
PAN4231BBDD5620: RNCC: 3 | RNVC: 2

5 Oct 1981

5340-12-321-0235
Retaining Strap

123210235
32711452461: RNCC: 3 | RNVC: 2

16 Mar 1990

5340-12-332-4869
Strap Fastener Loop

123324869
VE 01422: RNCC: 3 | RNVC: 2
01422: RNCC: 5 | RNVC: 2
VE01422: RNCC: 5 | RNVC: 2

16 Aug 1993

5340-12-311-4217
Mending Plate

123114217
272.315.941: RNCC: 3 | RNVC: 2
272.315 941: RNCC: 5 | RNVC: 9

1 Sep 1987

5340-12-342-1558
Angle Bracket

123421558
536D18714: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-123-8325
Resilient Mount

121238325
111301265: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-366-0376
Mounting Bracket

123660376
9436800056: RNCC: 3 | RNVC: 2

2 Mar 2005

5340-12-379-1598
Self-Locking Insert

123791598
000020100: RNCC: 3 | RNVC: 2

29 Jun 2009

5340-12-349-7725
Plain Solid Disk

123497725
105-22301.18: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-12-393-5820
Manual Control Lever

123935820
3045456: RNCC: 3 | RNVC: 2
03045456: RNCC: 5 | RNVC: 2

25 Sep 2013

5340-12-338-4670
Manual Control Lever

123384670
2300211-064500.000.0: RNCC: 2 | RNVC: 2
2300211-064500.000.0: RNCC: 3 | RNVC: 2

14 Jul 1995

5340-12-191-7311
Nonmetallic Bumper

121917311
4603230185: RNCC: 3 | RNVC: 2
5094-39: RNCC: 5 | RNVC: 2
721 1 54 042 1: RNCC: 5 | RNVC: 9

1 Mar 1982

5340-12-139-7166
Resilient Mount

121397166
TWH01-370: RNCC: 3 | RNVC: 2
TWH01-370: RNCC: 5 | RNVC: 2
TWH01-370: RNCC: 5 | RNVC: 2
845-TWH-01-370-NR45.ST: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-338-6742
Access Door

123386742
810311-10: RNCC: 2 | RNVC: 2
810311-10: RNCC: 5 | RNVC: 9
810311-10: RNCC: 5 | RNVC: 9

14 Aug 1995

5340-12-346-6816
Mounting Bracket

123466816
5052-180302003: RNCC: 3 | RNVC: 2
5052-18 03 02 003: RNCC: 5 | RNVC: 2

25 Aug 1998

5340-12-701-7291
Angle Bracket

127017291
VG95211-ML-127017291: RNCC: 2 | RNVC: 2
5.12.7607.0450.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7197
Angle Bracket

127017197
VG95211-ML-127017197: RNCC: 2 | RNVC: 2
5.12.7601.8387.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-3517
Rod End Connector

127013517
VG95211-ML-127013517: RNCC: 2 | RNVC: 2
5.12.5111.4390.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-144-9869
Retaining Clip

121449869
LN9184-050: RNCC: 2 | RNVC: 2
50LN9184: RNCC: 5 | RNVC: 2
LN9184-50: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-343-2931
Mounting Bracket

123432931
9997006-241070.000.0: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-12-386-2024
Access Cover

123862024
2500262-191130.001.0: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-322-6983
Butt Hinge Leaf

123226983
NO PRIMARY REF 12-322-6983: RNCC: 3 | RNVC: 2
50.188-72/84-091: RNCC: 5 | RNVC: 9
50188-72/84-091: RNCC: 5 | RNVC: 9

13 Sep 1990

5340-12-150-2322
Retaining Strap

121502322
DIN72571-2X10-MS: RNCC: 2 | RNVC: 2
DIN72571-2X10-MS: RNCC: 3 | RNVC: 2
2X10DIN72571MS: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-172-8615
Angle Bracket

121728615
42011947: RNCC: 3 | RNVC: 2
42011947EE5042-36: RNCC: 5 | RNVC: 2

27 Feb 1978

5340-12-181-2868
Clamping Catch

121812868
2500035-320000.00: RNCC: 3 | RNVC: 2
2500035-320000-00: RNCC: 5 | RNVC: 2
2500035-320000-00: RNCC: 5 | RNVC: 9
2500035-320000.00: RNCC: 5 | RNVC: 9
2500035-320000.00: RNCC: 5 | RNVC: 9

9 Nov 1979

5340-12-348-0185
Spacing Threaded Standoff

123480185
V42254-A142-V1: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-12-308-9618
Nonmetallic Bumper

123089618
1281-64360.07: RNCC: 2 | RNVC: 2
160157: RNCC: 3 | RNVC: 2
1281-64360.07: RNCC: 5 | RNVC: 2

2 Dec 1986

5340-12-320-1036
Sliding Stay

123201036
C249-A15-C190: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-364-9837
Dust And Moisture Seal Protective Cap

123649837
AFG073215-01: RNCC: 3 | RNVC: 2

20 Nov 2004

5340-12-319-2312
Helical Compression Spring Seat

123192312
1420328052: RNCC: 3 | RNVC: 2

14 Sep 1989

5340-12-349-3441
Webbing Strap

123493441
A1Z10283990: RNCC: 2 | RNVC: 2
A1Z10283990: RNCC: 3 | RNVC: 2

29 Oct 1999

5340-12-184-8836
Double Angle Bracket

121848836
5498951: RNCC: 3 | RNVC: 2
549.8951: RNCC: 5 | RNVC: 2

26 Aug 1980

5340-12-317-3115
Helical Compression Spring Retainer

123173115
WW 482 525: RNCC: 2 | RNVC: 2
26153.01: RNCC: 3 | RNVC: 2
WW 482 525: RNCC: 3 | RNVC: 9
WW 482 525: RNCC: 5 | RNVC: 2

29 Mar 1989

5340-12-365-3242
Mounting Bracket

123653242
5160-543202A00C: RNCC: 2 | RNVC: 2
5160-543202A00C: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-391-5702
Section Block Clamp

123915702
I000773: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-12-169-2024
Rod End Clevis

121692024
WW410827: RNCC: 3 | RNVC: 2
WW410827: RNCC: 5 | RNVC: 2
WW 410 827: RNCC: 5 | RNVC: 2
WW410827: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-335-2986
Nonmetallic Bumper

123352986
2420026006: RNCC: 3 | RNVC: 2
2420026003: RNCC: 5 | RNVC: 2
2420026006: RNCC: 5 | RNVC: 2

5 Aug 1994

5340-12-391-5976
Helical Compression Spring Seat

123915976
7172273: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-12-365-3293
Hand Crank

123653293
114230: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-391-6772
Tie Down Adapter

123916772
9018600314: RNCC: 3 | RNVC: 2

26 Mar 2013

5340-12-135-6740

5340-12-094-2413

5340-12-359-9696
Mounting Bracket

123599696
9412850340: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-356-0497
Mounting Bracket

123560497
2339-630052A00C: RNCC: 3 | RNVC: 2

16 Jan 2002

5340-12-331-7808
Manual Control Lever

123317808
2422002073: RNCC: 3 | RNVC: 2

21 Jun 1993

5340-12-378-4293
Lock Bolt

123784293
65000342: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-359-4351
Loop Clamp

123594351
DIN3016-1-D1-7X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-146-6220
Webbing Strap

121466220
23110-4102.01: RNCC: 2 | RNVC: 2
23110-4102-01: RNCC: 5 | RNVC: 2
23110-4102-01: RNCC: 5 | RNVC: 9
23110-4102-01: RNCC: 5 | RNVC: 9
000-A3-25X2,5X750-BW-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-315-5608
Nonmetallic Bumper

123155608
200.754: RNCC: 2 | RNVC: 2
200.754: RNCC: 3 | RNVC: 2
98104501: RNCC: 5 | RNVC: 2
WW 492 077: RNCC: 5 | RNVC: 9

9 Nov 1988

5340-12-306-1960
Retaining Strap

123061960
1120-80459: RNCC: 3 | RNVC: 2

4 Feb 1986

5340-12-369-1794
Mounting Bracket

123691794
TA3004P010: RNCC: 3 | RNVC: 2

31 May 2006

5340-12-043-8742

5340-12-321-5987
Electrical-Mechanical Equipment Post

123215987
VG95148B7XM4X30-AL-CHROMATIERT: RNCC: 2 | RNVC: 2
VG95148B7XM4X30-AL-CHROMATIERT: RNCC: 3 | RNVC: 2
774-046-26: RNCC: 3 | RNVC: 2

6 Jun 1990

5340-12-314-4857
Mending Plate

123144857
272.1765.2911-02: RNCC: 2 | RNVC: 2
272.1765.2911-02: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-12-141-3312
Strap End Clip

121413312
3230012: RNCC: 3 | RNVC: 2
99925001100: RNCC: 5 | RNVC: 2
11VG4862: RNCC: 5 | RNVC: 2
999925011000: RNCC: 5 | RNVC: 2
999250011000: RNCC: 5 | RNVC: 2
06438390030: RNCC: 5 | RNVC: 2
56178: RNCC: 5 | RNVC: 2
2509FKUE603-053: RNCC: 5 | RNVC: 9
11VG4862: RNCC: 5 | RNVC: 9
VG4862-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-7223
Angle Bracket

121907223
NO PRIMARY REF 12-190-7223: RNCC: 3 | RNVC: 2
25-78195-00: RNCC: 5 | RNVC: 9
25/78195.00: RNCC: 5 | RNVC: 9
7506 578195: RNCC: 5 | RNVC: 9
7506578195: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-317-3196
Angle Bracket

123173196
4900064-4121.017: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-189-1832
Mounting Bracket

121891832
23111-3385.00: RNCC: 2 | RNVC: 2
23111-3385.00: RNCC: 3 | RNVC: 2
1119488: RNCC: 5 | RNVC: 9
23111-3385.00: RNCC: 5 | RNVC: 9
23111-3385-00: RNCC: 5 | RNVC: 9

9 Sep 1981

5340-12-312-4844
Electrical-Mechanical Equipment Post

123124844
42491/0111-04: RNCC: 3 | RNVC: 2

12 Jan 1988

5340-12-317-4761
Pipe Bracket

123174761
39 040 38 971: RNCC: 3 | RNVC: 2
02102531EZ0150-22: RNCC: 5 | RNVC: 2
0210 2531: RNCC: 5 | RNVC: 2
91501347: RNCC: 5 | RNVC: 2
210-2531: RNCC: 5 | RNVC: 9

11 Apr 1989

5340-12-198-6906
Dust And Moisture Seal Protective Cap

121986906
529201-0000.000: RNCC: 3 | RNVC: 2
529201: RNCC: 5 | RNVC: 2

17 Feb 1984

5340-12-196-4518
Bridge Clamp

121964518
C22117-A163-C5: RNCC: 3 | RNVC: 2
C22117A163C5: RNCC: 5 | RNVC: 2

7 Jul 1983

5340-12-183-3477
Platte

121833477
844-30-010000009-0A: RNCC: 3 | RNVC: 2

9 Apr 1980

5340-12-316-3853
Rod End Clevis

123163853
326-52-0700-02: RNCC: 3 | RNVC: 2

13 Jan 1989

5340-12-198-1761
Mending Plate

121981761
5801999-131000.01: RNCC: 2 | RNVC: 2
5801999-131000.01: RNCC: 3 | RNVC: 2

27 Dec 1983

5340-12-158-9671
Electrical-Mechanical Equipment Post

121589671
934-01-00-06: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-300-8919
Handle Grip

123008919
0851-228-00: RNCC: 3 | RNVC: 2
1360712: RNCC: 5 | RNVC: 2
1360712: RNCC: 5 | RNVC: 2

11 Sep 1984

5340-12-377-6794
Webbing Strap

123776794
4100036-150297.000: RNCC: 2 | RNVC: 2
4100036-150297.000: RNCC: 3 | RNVC: 2

3 Feb 2009

5340-12-335-3240
Expansion Plug

123353240
DIN443-A25-ST-A3P: RNCC: 2 | RNVC: 2
A25DIN443-ST-ZN: RNCC: 5 | RNVC: 2
A25DIN443-VERZINKT: RNCC: 5 | RNVC: 2
DIN443-A25-A3P: RNCC: 5 | RNVC: 2

10 Aug 1994

5340-12-381-5519
Mechanical Stop

123815519
8902440201: RNCC: 3 | RNVC: 2

3 Mar 2010

5340-12-166-9090
Retaining Strap

121669090
5800748-11.134: RNCC: 3 | RNVC: 2
5800748-11-134: RNCC: 5 | RNVC: 9

29 Oct 1976

5340-12-313-0202
Angle Bracket

123130202
P-086149-013: RNCC: 3 | RNVC: 2
P086149-013: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-161-7272
Loop Clamp

121617272
DIN3016-1-A1-11X15-W1-2: RNCC: 2 | RNVC: 2
RS1.11/15: RNCC: 3 | RNVC: 2
DIN3016-A1-11X15-W1-2: RNCC: 3 | RNVC: 2
4110015011: RNCC: 5 | RNVC: 2
RS1100-11-15: RNCC: 5 | RNVC: 2
RS1100.11/15: RNCC: 5 | RNVC: 2
VG95931A11X15W1: RNCC: 5 | RNVC: 9
VG95931-A11X15-W1: RNCC: 5 | RNVC: 9
DIN3016-A1-11X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-351-6537
Blank Panel

123516537
5.042-372: RNCC: 3 | RNVC: 2

14 Aug 2000

5340-12-366-5063
Mounting Bracket

123665063
2 0072-055: RNCC: 3 | RNVC: 2
2 0072-055: RNCC: 5 | RNVC: 2

2 May 2005

5340-12-366-1367
Mounting Bracket

123661367
2500267-195800.001.0: RNCC: 2 | RNVC: 2
2500267-195800.001.0: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-12-181-0498
Plain Solid Disk

121810498
1-212-048-0087: RNCC: 3 | RNVC: 9
0504293: RNCC: 5 | RNVC: 2
504293: RNCC: 5 | RNVC: 9

19 Oct 1979

5340-12-172-7345
Nonmetallic Bumper

121727345
1-213-064-3613: RNCC: 3 | RNVC: 9
2980331EY5002-09: RNCC: 5 | RNVC: 2
02980331: RNCC: 5 | RNVC: 2

14 Feb 1978

5340-12-700-8784
Loop Clamp

127008784
VG95211-ML-127008784: RNCC: 2 | RNVC: 2
1729S-52-11-T: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-305-1128
Mending Plate

123051128
4900059-111213.004.0: RNCC: 3 | RNVC: 2
1228832: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-406-4538
Access Cover

5340-12-334-0746
Casement Fastener

123340746
ME24091-125130000: RNCC: 2 | RNVC: 2
ME24091-125130000: RNCC: 5 | RNVC: 9

17 Mar 1994

5340-12-349-5609
Loop Clamp

123495609
JN0206-20: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-12-188-4440
Dust And Moisture Seal Protective Plug

121884440
300F28: RNCC: 3 | RNVC: 2
GPN300F28: RNCC: 5 | RNVC: 2
GPN300F28: RNCC: 5 | RNVC: 2
GPN300F28: RNCC: 5 | RNVC: 2
A373-15: RNCC: 5 | RNVC: 2
110002842: RNCC: 5 | RNVC: 2
300002800: RNCC: 5 | RNVC: 9
F28: RNCC: 5 | RNVC: 9
GPN300,F28: RNCC: 5 | RNVC: 9
F28GPN300: RNCC: 5 | RNVC: 9

9 Jul 1981

5340-12-150-0126
Resilient Mount

121500126
W4-959F: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-198-7213
Nut And Bolt Locking Plate

121987213
5801998-410000.13: RNCC: 2 | RNVC: 2
5801998-410000.13: RNCC: 3 | RNVC: 2

22 Feb 1984

5340-12-186-0357
Dust And Moisture Seal Protective Cap

121860357
097121-236: RNCC: 3 | RNVC: 2
06 837 8036: RNCC: 5 | RNVC: 2
068378036: RNCC: 5 | RNVC: 2
097121-236: RNCC: 5 | RNVC: 9
97121-236: RNCC: 5 | RNVC: 9

25 Nov 1980

5340-12-361-4762
Snap-In Plain Standoff

123614762
15024-001-017: RNCC: 3 | RNVC: 2
15024-01-17: RNCC: 5 | RNVC: 9

7 Oct 2003

5340-12-344-3763
Mounting Bracket

123443763
A-566920-029: RNCC: 3 | RNVC: 2
A566920-029: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-197-7939
Webbing Strap

121977939
2500058-130160.00: RNCC: 2 | RNVC: 2
2500058-130160.00: RNCC: 3 | RNVC: 2
2500058-130160.00: RNCC: 5 | RNVC: 2
2500058-130160.00: RNCC: 5 | RNVC: 9
000-D7-25X2,5X500-PE-RAL6031: RNCC: 6 | RNVC: 9

23 Nov 1983

5340-12-197-7664
Mending Plate

121977664
A-145401-059: RNCC: 3 | RNVC: 2
A145401-059: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-320-3995
Mounting Bracket

123203995
P-296828-009: RNCC: 3 | RNVC: 2
P296828-009: RNCC: 5 | RNVC: 2

11 Jan 1990

5340-12-190-4855
Dust And Moisture Seal Protective Cap

121904855
LP-019-5-74: RNCC: 3 | RNVC: 2
K30805-2: RNCC: 5 | RNVC: 2
LP019-5-74: RNCC: 5 | RNVC: 2

1 Dec 1981

5340-12-164-8256
Nonmetallic Bumper

121648256
VG95092A11X1X22X7,5-PUR60: RNCC: 2 | RNVC: 2
837-4-8614-013.PUR60: RNCC: 3 | RNVC: 2
36.28.9: RNCC: 5 | RNVC: 2
ZB11.36.28.9: RNCC: 5 | RNVC: 2
8432400: RNCC: 5 | RNVC: 2
8614-013: RNCC: 5 | RNVC: 2
8614013: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-330-2207
Hand Crank

123302207
4900255-221000-00-01: RNCC: 2 | RNVC: 2
4900255-221000-00-01: RNCC: 3 | RNVC: 2
49.032.21000.00: RNCC: 5 | RNVC: 9

17 Nov 1992

5340-12-333-6029
Hinged Hasp

123336029
NR.100/100: RNCC: 3 | RNVC: 2
100/100: RNCC: 5 | RNVC: 2
UEBERFALLE 100/100: RNCC: 5 | RNVC: 2
296420: RNCC: 6 | RNVC: 9
296420(100): RNCC: 6 | RNVC: 9

12 Jan 1994

5340-12-312-1913
Lock-Release Lever

123121913
2001000-5: RNCC: 2 | RNVC: 2
2001000-5: RNCC: 3 | RNVC: 2
5120802090: RNCC: 3 | RNVC: 2
2001001-5: RNCC: 5 | RNVC: 9
2001001-5: RNCC: 5 | RNVC: 9
400425: RNCC: 5 | RNVC: 9
TK-E59C-4210-010-250: RNCC: 5 | RNVC: 9
2 001 001-5: RNCC: 5 | RNVC: 9
1920802001: RNCC: 5 | RNVC: 9
TK-BA35-4210-526-250: RNCC: 5 | RNVC: 9

2 Dec 1987

5340-12-374-6828
Mounting Plate

123746828
SK976-061290.002.0: RNCC: 3 | RNVC: 2
1728042: RNCC: 5 | RNVC: 9

6 Mar 2008

5340-12-382-7591
Double Angle Bracket

123827591
KB-69236-655: RNCC: 3 | RNVC: 2

5 Aug 2010

5340-12-303-0821
Mending Plate

123030821
C22165-A150-C58: RNCC: 3 | RNVC: 2
C22165A150C58: RNCC: 5 | RNVC: 2

22 Feb 1985

5340-12-189-7689
Handwheel

121897689
VG85084-B-250X222.1096.01: RNCC: 2 | RNVC: 2
VG85084-B-250X222.1096.01: RNCC: 3 | RNVC: 2
VG85084-B-250X222.1096.01: RNCC: 3 | RNVC: 2
VG85084-B-250X222.1096.01: RNCC: 3 | RNVC: 9
B250X22VG85084-RG5: RNCC: 5 | RNVC: 2
B250X22VG85084GCUSN5ZNPB: RNCC: 5 | RNVC: 2
B250X22VG85084RG5: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-12-128-9095
Retaining Strap

121289095
1216 8429: RNCC: 3 | RNVC: 2
6-420-0-977-007-4: RNCC: 5 | RNVC: 9
6.420.0.977.007.4: RNCC: 5 | RNVC: 9
12168429: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-331-7137
Dust And Moisture Seal Boot

123317137
44-35585: RNCC: 3 | RNVC: 2
430 363: RNCC: 5 | RNVC: 2

14 Jun 1993

5340-12-339-6930
Spacing Threaded Standoff

123396930
VG95148C6XM3X17-NRST: RNCC: 2 | RNVC: 2
67.3511.000.37-A012: RNCC: 3 | RNVC: 2
297 238: RNCC: 5 | RNVC: 2

21 Dec 1995

5340-12-178-1535
Access Cover

121781535
2451701: RNCC: 3 | RNVC: 2
5340-12-310-3337: RNCC: 6 | RNVC: 9

22 Mar 1979

5340-12-309-3801
Mounting Bracket

123093801
5300000-00282: RNCC: 3 | RNVC: 2

20 Jan 1987

5340-12-348-0137
Dust And Moisture Seal Protective Plug

123480137
300V11: RNCC: 3 | RNVC: 2
300V11: RNCC: 5 | RNVC: 2
E30374-30: RNCC: 5 | RNVC: 2
GPN300V11: RNCC: 5 | RNVC: 2

26 Mar 1999

5340-12-306-8816
Mending Plate

123068816
C150ZZ50001-000: RNCC: 3 | RNVC: 2

14 Apr 1986

5340-12-136-0516
Helical Compression Spring Seat

121360516
251609289: RNCC: 3 | RNVC: 2
113609289: RNCC: 5 | RNVC: 2
B250-00-5: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-354-8912
Roller Holder

123548912
5400049-118621.00: RNCC: 3 | RNVC: 2

3 Sep 2001

5340-12-347-6682
Corner Brace

123476682
919648-4001: RNCC: 3 | RNVC: 2

26 Jan 1999

5340-12-363-9074
Angle Bracket

123639074
J92226809-401: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-190-5666
Dust And Moisture Seal Protective Plug

121905666
406-475-01-08: RNCC: 3 | RNVC: 2
0203535: RNCC: 5 | RNVC: 2
2695-383: RNCC: 5 | RNVC: 2
2695383: RNCC: 5 | RNVC: 2
011026: RNCC: 5 | RNVC: 2
406-475-01-08: RNCC: 5 | RNVC: 9

7 Dec 1981

5340-12-187-2979
Dust And Moisture Seal Protective Plug

121872979
009-030.115-011: RNCC: 3 | RNVC: 2
12790-112000.011: RNCC: 5 | RNVC: 2
12790-112000-011: RNCC: 5 | RNVC: 9
009-030-115-011: RNCC: 5 | RNVC: 9

26 Mar 1981

5340-12-312-3027
Angle Bracket

123123027
S4-9802750: RNCC: 2 | RNVC: 2
S4-9802750: RNCC: 3 | RNVC: 2
S4-9802750: RNCC: 5 | RNVC: 9

14 Dec 1987

5340-12-322-0100
Mounting Plate

123220100
23290-171025.000: RNCC: 2 | RNVC: 2
9868972: RNCC: 3 | RNVC: 2
23290-171025.000: RNCC: 5 | RNVC: 9
9868972: RNCC: 5 | RNVC: 9

17 Jul 1990

5340-12-329-5555
Access Cover

123295555
1012893: RNCC: 3 | RNVC: 2
1B7-05.044-02: RNCC: 5 | RNVC: 2
1B7-05-044-01-3: RNCC: 5 | RNVC: 9

29 Aug 1992

5340-12-311-9405
Angle Bracket

123119405
P-295489-409: RNCC: 3 | RNVC: 2
P295489-409: RNCC: 5 | RNVC: 2

2 Nov 1987

5340-12-374-7390
Mounting Bracket

123747390
SK976-061430.000.0: RNCC: 3 | RNVC: 2
7097344: RNCC: 5 | RNVC: 2
1780204: RNCC: 5 | RNVC: 2

12 Mar 2008

5340-12-300-4816
Webbing Strap

123004816
221-00-352-4: RNCC: 3 | RNVC: 2
54 032: RNCC: 5 | RNVC: 2
2500149-300.00: RNCC: 5 | RNVC: 9
2500149-300.00: RNCC: 5 | RNVC: 9
2500149-300.00: RNCC: 5 | RNVC: 9
2500149-300.00: RNCC: 5 | RNVC: 9
2500149-300.00: RNCC: 5 | RNVC: 9
221-00-352-4: RNCC: 5 | RNVC: 9
2500149-300.00: RNCC: 5 | RNVC: 9
2500149-300.00: RNCC: 5 | RNVC: 9

4 Aug 1984

5340-12-701-7824
Retaining Band

127017824
VG95211-ML-127017824: RNCC: 2 | RNVC: 2
5.12.7800.8180.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-307-8808
Butt Hinge

123078808
DIN81402-AR50-MS-P: RNCC: 2 | RNVC: 2

6 Aug 1986

5340-12-199-7017
Metal Runner

121997017
5801998-260000.00: RNCC: 2 | RNVC: 2
2-09.013: RNCC: 3 | RNVC: 2
5801998-260000.00: RNCC: 3 | RNVC: 2
5801998-260000.00: RNCC: 3 | RNVC: 2
5801998-260000.00: RNCC: 5 | RNVC: 2
5801998-260000.00: RNCC: 5 | RNVC: 9

24 May 1984

5340-12-701-1608
Mounting Bracket

127011608
VG95211-ML-127011608: RNCC: 2 | RNVC: 2
5.12.0235.1085.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-339-7132
Mending Plate

123397132
9142725: RNCC: 3 | RNVC: 2
9142725: RNCC: 5 | RNVC: 2
210870008002: RNCC: 5 | RNVC: 9

2 Jan 1996

5340-12-198-0502
Access Cover

121980502
43711465-601: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-170-9930
Dust And Moisture Seal Protective Cap

121709930
5024306100: RNCC: 3 | RNVC: 2
5024 306 100: RNCC: 3 | RNVC: 2
5024306100: RNCC: 5 | RNVC: 2
5024306100: RNCC: 5 | RNVC: 2
5024306100: RNCC: 5 | RNVC: 9

29 Aug 1977

5340-12-323-2125
Dust And Moisture Seal Protective Cap

123232125
000 964 37 27: RNCC: 3 | RNVC: 2
1631414: RNCC: 5 | RNVC: 2

2 Nov 1990

5340-12-348-9269
Mounting Bracket

123489269
245/7383-02-26-00: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-12-359-6776
Mounting Plate

123596776
2500261-180000.063.0: RNCC: 2 | RNVC: 2
2500261-180000.063.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-199-0303
Mending Plate

121990303
5801549-2110.004: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-12-302-3566
Electrical-Mechanical Equipment Post

123023566
VG95148B8XM4X25-ST: RNCC: 2 | RNVC: 2
VG95148B8XM4X25-ST: RNCC: 3 | RNVC: 2
0801-1300: RNCC: 3 | RNVC: 2

19 Dec 1984

5340-12-361-6238
Loop Clamp

123616238
DIN3016-1-D1-5X9-W1-2-NBR: RNCC: 2 | RNVC: 2

27 Oct 2003

5340-12-702-9198
Rod End Connector

127029198
VG95211-ML-127029198: RNCC: 2 | RNVC: 2
5.12.5101.8020.91: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-162-4743
Nonmetallic Bumper

121624743
5800359-010100.04: RNCC: 3 | RNVC: 2
5800359-010100-04: RNCC: 5 | RNVC: 2
5800359-010100-04: RNCC: 5 | RNVC: 9
5800359-010100.04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-337-9861
Access Cover

123379861
230-111.66: RNCC: 3 | RNVC: 2
PK-HH-101A: RNCC: 5 | RNVC: 9

9 May 1995

5340-12-188-1414
Mounting Bracket

121881414
61E4101.1001: RNCC: 3 | RNVC: 2
0012-750: RNCC: 5 | RNVC: 2
61E4101.1001: RNCC: 5 | RNVC: 2
0012-750: RNCC: 5 | RNVC: 2

9 Jun 1981

5340-12-183-7472
Hand Crank

121837472
709004: RNCC: 3 | RNVC: 9

15 May 1980

5340-12-191-1300
Angle Bracket

121911300
251156240000: RNCC: 3 | RNVC: 2
6153008: RNCC: 5 | RNVC: 2
521755: RNCC: 5 | RNVC: 2
251156240000: RNCC: 5 | RNVC: 2

13 Jan 1982

5340-12-197-3729
Retaining Band

121973729
531906-8001: RNCC: 3 | RNVC: 2
531909-9003: RNCC: 3 | RNVC: 2
531906-8001: RNCC: 5 | RNVC: 2
531906-8001.000: RNCC: 5 | RNVC: 2
531909-9003: RNCC: 5 | RNVC: 2

17 Oct 1983

5340-12-305-0577
Angle Bracket

123050577
A-296712-008: RNCC: 3 | RNVC: 2
A296712-008: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-356-2408
Mounting Bracket

123562408
2339-070080A00C: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-350-2116
Mounting Bracket

123502116
5.042-253: RNCC: 3 | RNVC: 2
5-042-253: RNCC: 5 | RNVC: 9

29 Feb 2000

5340-12-302-0245
Double Angle Bracket

123020245
P-855977-404: RNCC: 3 | RNVC: 2
P855977-404: RNCC: 5 | RNVC: 2

28 Nov 1984

5340-12-384-1467
Mounting Bracket

123841467
2500267-000313.001.0: RNCC: 2 | RNVC: 2
2500267-000313.001.0: RNCC: 3 | RNVC: 2

26 Jan 2011

5340-12-322-8679
Retaining Strap

123228679
704-110191-000-0: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-12-189-2625
Lock-Release Lever

121892625
A10-24.972.02.0: RNCC: 3 | RNVC: 2
A10-24-972-02-0: RNCC: 5 | RNVC: 2
A10-24-972-02-0: RNCC: 5 | RNVC: 9
85-691-4675: RNCC: 6 | RNVC: 9

15 Sep 1981

5340-12-337-7266
Mounting Bracket

123377266
2300231-223010.000.0: RNCC: 2 | RNVC: 2
2300231-223010.000.0: RNCC: 3 | RNVC: 2

4 Apr 1995

5340-12-365-1650
Mounting Bracket

123651650
2500267-000007.000.0: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-344-4268
Mounting Bracket

123444268
P-297101-001: RNCC: 3 | RNVC: 2
P297101-001: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-358-4265
Detent Plunger

123584265
4000A-340270.005.0: RNCC: 2 | RNVC: 2
4000A-340270.005.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-327-1641
Access Cover

123271641
85053-20.10.03.0: RNCC: 3 | RNVC: 2
85053-20.10.03.0: RNCC: 5 | RNVC: 9

10 Dec 1991

5340-12-702-5405
Mounting Bracket

127025405
VG95211-ML-127025405: RNCC: 2 | RNVC: 2
5.51.7204.4110.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-187-7672
Nonmetallic Bumper

121877672
BM-P-897009-001: RNCC: 3 | RNVC: 2
P897009-001: RNCC: 5 | RNVC: 2

6 May 1981

5340-12-193-3204
Metal Runner

121933204
5400027-2130: RNCC: 2 | RNVC: 2
813.02.01.03: RNCC: 3 | RNVC: 2
5400027-2130: RNCC: 3 | RNVC: 2
54083-214: RNCC: 5 | RNVC: 9
5400027-2130: RNCC: 5 | RNVC: 9

12 Jul 1982

5340-12-701-4538
Loop Clamp

127014538
VG95211-ML-127014538: RNCC: 2 | RNVC: 2
5.12.5314.1000.63: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-360-0139
Lock-Release Lever

123600139
GN 300.1-63-M8-SW: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-356-5227
Door Closer

123565227
DL1.L-X20.9/11W: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-333-8784
Nut And Bolt Locking Plate

123338784
1159940632: RNCC: 3 | RNVC: 2
115-994-0632: RNCC: 5 | RNVC: 2

21 Feb 1994

5340-12-195-4766
Nonmetallic Bumper

121954766
C22136-A1000-B359: RNCC: 3 | RNVC: 2
C22136A1000B359: RNCC: 5 | RNVC: 2

2 Mar 1983

5340-12-182-6468
Plain Solid Disk

121826468
5801215-021-010: RNCC: 3 | RNVC: 2
5801215-021.010: RNCC: 5 | RNVC: 2
5801215-021-010: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-12-351-6210
Mounting Bracket

123516210
J28230072-401: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-12-352-5059
Lock-Release Lever

123525059
06441-110X40: RNCC: 3 | RNVC: 2
NLM06441-110X40: RNCC: 5 | RNVC: 2

23 Nov 2000

5340-12-353-0164
Quick Release Plunger

123530164
03021-08: RNCC: 3 | RNVC: 2
NLM03021-08: RNCC: 5 | RNVC: 2
NLM3021-08: RNCC: 5 | RNVC: 9

19 Jan 2001

5340-12-155-1150
Butt Hinge Leaf

121551150
160-24775-24: RNCC: 3 | RNVC: 2
160-24775-24: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-184-1974
Nonmetallic Bumper

121841974
10629-01: RNCC: 3 | RNVC: 2
465775: RNCC: 5 | RNVC: 2

3 Jul 1980

5340-12-180-2718
Butt Hinge

121802718
39-1042: RNCC: 3 | RNVC: 2

31 Aug 1979

5340-12-341-8602
Mending Plate

123418602
463-061980.002: RNCC: 3 | RNVC: 9
9893279: RNCC: 5 | RNVC: 9

7 Nov 1996

5340-12-191-0786
Dust And Moisture Seal Protective Plug

121910786
44-20730: RNCC: 3 | RNVC: 2

11 Jan 1982

5340-12-340-0336
Loop Clamp

123400336
DIN3015-L-KP-5-R-32-PP: RNCC: 2 | RNVC: 2
532PP: RNCC: 3 | RNVC: 2

16 Feb 1996

5340-12-177-4635
Mending Plate

121774635
2300002-181130.001: RNCC: 2 | RNVC: 2
2300002-181130.001: RNCC: 3 | RNVC: 2
2300002-181130.001: RNCC: 3 | RNVC: 2
2300002-181130-001: RNCC: 5 | RNVC: 9
2300002-181130.001: RNCC: 5 | RNVC: 9

1 Feb 1979

5340-12-164-4050
Loop Clamp

121644050
DIN3016-1-E1-12X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E1-12X20-W1-2: RNCC: 3 | RNVC: 2
RSGU0.12/20: RNCC: 3 | RNVC: 2
9400020012: RNCC: 5 | RNVC: 2
RSGU12-20: RNCC: 5 | RNVC: 2
RSGU12/20: RNCC: 5 | RNVC: 2
DIN3016-E1-12X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-E12X20-W1: RNCC: 5 | RNVC: 9
VG95931E12X20W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-192-1163
Loop Clamp

121921163
DIN3016-1-D1-75X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-75X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1.75/20: RNCC: 3 | RNVC: 2
9410020075: RNCC: 5 | RNVC: 2
RSGU1100-75-20: RNCC: 5 | RNVC: 2
RSGU1100.75/20: RNCC: 5 | RNVC: 2
DIN3016-D1-75X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-D75X20-W1: RNCC: 5 | RNVC: 9
VG95931D75X20-W1: RNCC: 5 | RNVC: 9

24 Mar 1982

5340-12-181-4692
Resilient Mount

121814692
2K2-BAM-25-E: RNCC: 3 | RNVC: 2
2K2-BAM-25-E: RNCC: 5 | RNVC: 9
2K2BAM25E: RNCC: 5 | RNVC: 9

26 Nov 1979

5340-12-342-6582
Mounting Bracket

123426582
463-223548.000: RNCC: 3 | RNVC: 9
9896427: RNCC: 5 | RNVC: 9

12 Mar 1997

5340-12-330-8255
Spring Loaded Cylinder Fastener

123308255
GN617-5-A: RNCC: 3 | RNVC: 2
03090-1105: RNCC: 3 | RNVC: 2
GN617-M10-A: RNCC: 5 | RNVC: 2
GN617-M10/A: RNCC: 5 | RNVC: 2
NLM03090-1105: RNCC: 5 | RNVC: 2
309-105: RNCC: 5 | RNVC: 9
ASC1483675: RNCC: 5 | RNVC: 9

12 Feb 1993

5340-12-354-4139
Sliding Door Track

123544139
VG95211-ML-123544139: RNCC: 2 | RNVC: 2
E20937: RNCC: 3 | RNVC: 2

10 Jul 2001

5340-12-194-5038
Webbing Strap

121945038
5800686-11261: RNCC: 3 | RNVC: 2
000-C1-25X2,0X750-PE-RAL6031: RNCC: 6 | RNVC: 9

10 Nov 1982

5340-12-350-3305
Mounting Bracket

123503305
VG95211-ML-123503305: RNCC: 2 | RNVC: 2
160-76198: RNCC: 3 | RNVC: 2

16 Mar 2000

5340-12-374-1487
Retaining Strap

123741487
2167 4201-001: RNCC: 3 | RNVC: 2
2167 4201-001: RNCC: 5 | RNVC: 2

23 Jan 2008

5340-12-180-6340
Mending Plate

121806340
C106-A39-C29: RNCC: 2 | RNVC: 2
C106A39C29: RNCC: 3 | RNVC: 2
C106-A39-C29: RNCC: 5 | RNVC: 2
C106A39C29: RNCC: 5 | RNVC: 2
C106-A39-C29: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-303-3356
Sliding Stay

123033356
7300004-1000-01: RNCC: 2 | RNVC: 2
7300004-1000-01: RNCC: 3 | RNVC: 2
7300004-1000-01: RNCC: 5 | RNVC: 9

15 Mar 1985

5340-12-328-9186
Metallic Bumper

123289186
4900257-311400-00-00: RNCC: 2 | RNVC: 2
VS5027G050: RNCC: 3 | RNVC: 2
VS5027G050: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-301-5152
Elastic Cord Assembly

123015152
1513-918.128-150MM: RNCC: 3 | RNVC: 2

20 Oct 1984

5340-12-186-9315
Strap Fastener Loop

121869315
431271222680: RNCC: 3 | RNVC: 2
43127122268: RNCC: 5 | RNVC: 2
5801796-120000-09: RNCC: 5 | RNVC: 9
5801796-120000.09: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-12-359-9449
Dust And Moisture Seal Protective Cap

123599449
MD-006-5-74-KU: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-12-378-5275
Mounting Bracket

123785275
2300461-000110.001.0: RNCC: 2 | RNVC: 2
2300461-000110.001.0: RNCC: 3 | RNVC: 2

17 Apr 2009

5340-12-304-8541
Clamping Catch

123048541
2300126-181411.000.0: RNCC: 2 | RNVC: 2
2300126-181411.000.0: RNCC: 3 | RNVC: 2
2300126-181411.000.0: RNCC: 5 | RNVC: 2
2300126-181411.000.0: RNCC: 5 | RNVC: 9

28 Aug 1985

5340-12-325-3275
Expansion Shield

123253275
MS12/41: RNCC: 3 | RNVC: 2
MS12-41: RNCC: 5 | RNVC: 2

27 May 1991

5340-12-379-2160
Spring Tension Clip

123792160
XI30-6L: RNCC: 3 | RNVC: 2

3 Jul 2009

5340-12-122-0288
Turnbuckle

121220288
27-103-01H02: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-388-0115
Spring Tension Clip

123880115
X130-10L: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-346-6472
Webbing Strap

123466472
2300002-151531.000: RNCC: 2 | RNVC: 2
2300002-151531.000: RNCC: 3 | RNVC: 2
9869830: RNCC: 5 | RNVC: 9
2300002-151531.000: RNCC: 5 | RNVC: 9
9869830: RNCC: 5 | RNVC: 9

20 Aug 1998

5340-12-320-3025
Electrical-Mechanical Equipment Post

123203025
0241 0280: RNCC: 3 | RNVC: 2
02410280EE0147-44: RNCC: 5 | RNVC: 2
4071340: RNCC: 5 | RNVC: 2

29 Dec 1989

5340-12-385-3518
Mending Plate

123853518
F1.4211-50-40-00.00-10: RNCC: 3 | RNVC: 2
1084154: RNCC: 5 | RNVC: 2

25 May 2011

5340-12-359-6619
Loop Clamp

123596619
916016025200: RNCC: 3 | RNVC: 2
N16016-BRSGU25/20: RNCC: 5 | RNVC: 2

25 Feb 2003

5340-12-389-1654
Webbing Strap

123891654
5768-200320A01K: RNCC: 3 | RNVC: 2

31 May 2012

5340-12-309-5624
Mending Plate

123095624
5802261-200000.001: RNCC: 2 | RNVC: 2
5802261-200000.001: RNCC: 5 | RNVC: 9

4 Feb 1987

5340-12-341-9092
Angle Bracket

123419092
03579300-GE: RNCC: 3 | RNVC: 2
03579300-GELB LACKIERT: RNCC: 5 | RNVC: 2

14 Nov 1996

5340-12-702-7321
Angle Bracket

127027321
40-13706652032: RNCC: 2 | RNVC: 2

8 Dec 1995

5340-12-356-4169
Block Clamp

123564169
RAP-655: RNCC: 3 | RNVC: 2

26 Feb 2002

5340-12-196-9967
Webbing Strap

121969967
01803-2-SCHLAUFE-FE780MM-LE600MM: RNCC: 3 | RNVC: 2
79016/SCHLAUFE-1380-780: RNCC: 3 | RNVC: 2
4900059-322010.000.0: RNCC: 3 | RNVC: 2
4900059-322010-000-0: RNCC: 5 | RNVC: 2
DIN60060-2-50X780X600-C1/SCHLAUF: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-319-9410
Mounting Plate

123199410
2300232-202000.003.0: RNCC: 2 | RNVC: 2
2300232-202000.003.0: RNCC: 3 | RNVC: 2
9997001-202100.003.0: RNCC: 5 | RNVC: 2
2300232-202000.003.02: RNCC: 5 | RNVC: 9

20 Nov 1989

5340-12-320-7452
Access Cover

123207452
P-865111-403: RNCC: 3 | RNVC: 2
P865111-403: RNCC: 5 | RNVC: 2

12 Feb 1990

5340-12-338-4686
Access Door

123384686
2170-3378-000: RNCC: 3 | RNVC: 2
2170-3378-000: RNCC: 5 | RNVC: 9

14 Jul 1995

5340-12-132-9079
Retaining Strap

121329079
VG95933AR-10-W1-BK: RNCC: 2 | RNVC: 2
1/1D10MMN325: RNCC: 3 | RNVC: 2
MMN325-1-1D10: RNCC: 5 | RNVC: 2
MMN325-1-1D10: RNCC: 5 | RNVC: 2
MMN325-1-1D9-10: RNCC: 5 | RNVC: 2
1-1D10MMN325: RNCC: 5 | RNVC: 2
MMN325-1-1D9-10: RNCC: 5 | RNVC: 2
700325010100: RNCC: 5 | RNVC: 2
15010215: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-354-8645
Manual Control Handle

123548645
GN300.1-63-M8-40-SW: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-302-6333
Angle Bracket

123026333
1-2656-14-4: RNCC: 2 | RNVC: 2
1-2656-14-4: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-150-9786
Expansion Shield

121509786
S10: RNCC: 3 | RNVC: 2
6-241-0225: RNCC: 5 | RNVC: 2
SN4241-0225: RNCC: 5 | RNVC: 2
215325: RNCC: 5 | RNVC: 2
50110: RNCC: 5 | RNVC: 2
S10: RNCC: 5 | RNVC: 2
TP3: RNCC: 5 | RNVC: 2
2501101: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-394-1343
Access Cover

123941343
11.07051-0106: RNCC: 3 | RNVC: 2
11.07051-0106: RNCC: 5 | RNVC: 2

6 Nov 2013

5340-12-316-9183
Loop Clamp

123169183
DIN3016-1-D1-80X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-80X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.80/15-W1: RNCC: 3 | RNVC: 2
RSGU1.80/15: RNCC: 5 | RNVC: 2
DIN3016-D1-80X15W1-2: RNCC: 5 | RNVC: 2
DIN3016-D1-80X15W1-2: RNCC: 5 | RNVC: 9
VG 95931 D 80X15W1: RNCC: 5 | RNVC: 9
DIN3016-D1-80X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-D80X15-W1: RNCC: 5 | RNVC: 9

23 Feb 1989

5340-12-336-5296
Access Cover

123365296
6100146-103061.000.0: RNCC: 2 | RNVC: 2
6100146-103061.000.0: RNCC: 3 | RNVC: 2
6100146-103061.000.0: RNCC: 5 | RNVC: 2

23 Nov 1994

5340-12-335-2593
Loop Clamp

123352593
0132 0468: RNCC: 3 | RNVC: 2
1320468EY8932-50: RNCC: 5 | RNVC: 2
89233095: RNCC: 5 | RNVC: 2
H3250-A52-M8: RNCC: 5 | RNVC: 2

1 Aug 1994

5340-12-174-0600
Nonmetallic Bumper

121740600
TS264/501/1230-FLCN5590: RNCC: 3 | RNVC: 2
0003210006: RNCC: 5 | RNVC: 2
TS264-501-1230: RNCC: 5 | RNVC: 2
TS264/501/1230: RNCC: 5 | RNVC: 9

6 Jun 1978

5340-12-700-8785
Loop Clamp

127008785
VG95211-ML-127008785: RNCC: 2 | RNVC: 2
1729S-52-13: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-130-0612
Stift

121300612
6X378X30-30N331: RNCC: 3 | RNVC: 2
N331X6X378X30-30: RNCC: 3 | RNVC: 2
N3316X378X30-30: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-317-3230
Access Cover

123173230
4900064-41224.010: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-343-0886
Turnbuckle Body

123430886
0816 9984: RNCC: 3 | RNVC: 2
08169984: RNCC: 5 | RNVC: 2
8169984ED50-3443: RNCC: 5 | RNVC: 2

28 Apr 1997

5340-12-343-2983
Webbing Strap

123432983
NO PRIMARY REF 12-343-2983: RNCC: 3 | RNVC: 2
TK-KG35-4320-047: RNCC: 5 | RNVC: 2
TK-KG35-4320-047: RNCC: 5 | RNVC: 2

3 Jun 1997

5340-12-312-2523
Extension Drawer Slide

123122523
1840053: RNCC: 3 | RNVC: 2
75D5.030.001-02: RNCC: 5 | RNVC: 2

9 Dec 1987

5340-12-317-3224
Mending Plate

123173224
4900064-41222.010: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-331-2171
Clamping Catch

123312171
7421-51: RNCC: 3 | RNVC: 2
7421-51-00: RNCC: 5 | RNVC: 2

2 Apr 1993

5340-12-141-7452
Casement Fastener

121417452
VG95446T05D001A: RNCC: 2 | RNVC: 2
317561: RNCC: 3 | RNVC: 2
37G17-0036: RNCC: 5 | RNVC: 2
137950: RNCC: 5 | RNVC: 2
C42123-A18-D3: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-5894
Retaining Strap

121885894
32312-01: RNCC: 3 | RNVC: 2
32312-01: RNCC: 5 | RNVC: 2

20 Jul 1981

5340-12-187-1006
Dust And Moisture Seal Protective Cap

121871006
5800748-23118-001: RNCC: 3 | RNVC: 2
5800748-23118.001: RNCC: 5 | RNVC: 2

5 Mar 1981

5340-12-357-8910
Mounting Bracket

123578910
2300042-255290.003: RNCC: 2 | RNVC: 2
2300042-255290.003: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-12-199-3302
Mending Plate

121993302
3184924841: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-12-199-4693
Loop Clamp

121994693
LB0923660: RNCC: 3 | RNVC: 2
LB092.3660: RNCC: 5 | RNVC: 2

27 Apr 1984

5340-12-135-6515

5340-12-092-3841

5340-12-024-9063

5340-12-326-8972
Headless Straight Rod

123268972
P231995-023-IA: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-12-701-7414
Mounting Bracket

127017414
VG95211-ML-127017414: RNCC: 2 | RNVC: 2
5.12.7613.0260.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-335-6093
Mending Plate

123356093
704-163100-905-0: RNCC: 3 | RNVC: 2

6 Sep 1994

5340-12-330-5753
Angle Bracket

123305753
702-342200-901-0: RNCC: 2 | RNVC: 2
702-342200-901-0: RNCC: 3 | RNVC: 2

12 Jan 1993

5340-12-390-1241
Mounting Bracket

123901241
2300559-185300.009.0: RNCC: 2 | RNVC: 2
2300559-185300.009.0: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-12-358-0346
Support Hook

123580346
2800-195102.000.0: RNCC: 2 | RNVC: 2
2800-195102.000.0: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-12-183-2550
Wood Runner

121832550
56-0049-304-01: RNCC: 3 | RNVC: 2

28 Mar 1980

5340-12-343-4829
Dust And Moisture Seal Protective Cap

123434829
4025090051: RNCC: 3 | RNVC: 2
MS90376-10R: RNCC: 5 | RNVC: 2

26 Jun 1997

5340-12-350-4897
Mounting Plate

123504897
10063-000000.02: RNCC: 3 | RNVC: 2
10063-000000.02: RNCC: 5 | RNVC: 9

5 Apr 2000

5340-12-352-6654
Access Cover

123526654
251729060006: RNCC: 3 | RNVC: 2
251729060006: RNCC: 5 | RNVC: 2
FEP-1407-SC/037: RNCC: 5 | RNVC: 2

5 Dec 2000

5340-12-312-9965
Angle Bracket

123129965
401806-00: RNCC: 3 | RNVC: 2
9XD401806-00: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-12-701-7959
Mounting Plate

127017959
VG95211-ML-127017959: RNCC: 2 | RNVC: 2
5.12.8102.2510.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-351-7486
Angle Bracket

123517486
2500266-192500.001.0: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-12-368-2613
Dust And Moisture Seal Protective Cover

123682613
81626420036: RNCC: 3 | RNVC: 2
81.62642-0036: RNCC: 5 | RNVC: 2

18 Jan 2006

5340-12-131-5499

5340-12-143-0092
Loop Clamp

121430092
DIN3016-1-B1-14X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-B1-14X15-W1-2: RNCC: 3 | RNVC: 2
RS0.14/15: RNCC: 3 | RNVC: 2
4100015014: RNCC: 5 | RNVC: 2
RS14-15: RNCC: 5 | RNVC: 2
RS14/15: RNCC: 5 | RNVC: 2
DIN3016-B1-14X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-B14X15-W1: RNCC: 5 | RNVC: 9
VG95931B14X15W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-378-3896
Loop Clamp

123783896
DIN3016-1-D1-12X20-W5-CR: RNCC: 2 | RNVC: 2

1 Apr 2009

5340-12-340-7176
Loop Clamp

123407176
DIN3016-LB-K-4R-426,9-PP-W1: RNCC: 2 | RNVC: 2
RAPR2-426,9: RNCC: 3 | RNVC: 2
SP426,9PP-IS: RNCC: 3 | RNVC: 2
RAPR2-426,9: RNCC: 5 | RNVC: 2
DIN3016-L-B-K-4-R-26,9-PP-W1: RNCC: 5 | RNVC: 2

30 May 1996

5340-12-170-9073
Plug Button

121709073
5650084-1: RNCC: 3 | RNVC: 2
30044005: RNCC: 5 | RNVC: 2
81.68560-0010: RNCC: 5 | RNVC: 2
81685600010: RNCC: 5 | RNVC: 2

22 Aug 1977

5340-12-335-8000
Mending Plate

123358000
2782-004310.002.0: RNCC: 2 | RNVC: 2
2782-004310.002.0: RNCC: 3 | RNVC: 2

17 Sep 1994

5340-12-324-6037
Angle Bracket

123246037
737-151370.02.0: RNCC: 3 | RNVC: 2

6 Mar 1991

5340-12-326-3317
Lock-Release Lever

123263317
2300232-184202.000.0: RNCC: 2 | RNVC: 2
2300232-184202.000.0: RNCC: 3 | RNVC: 2

2 Sep 1991

5340-12-341-1505
Double Angle Bracket

123411505
P-297201-091: RNCC: 3 | RNVC: 2
P297201-091: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-12-301-4308
Angle Bracket

123014308
P-855377-405: RNCC: 3 | RNVC: 2
P855377-405: RNCC: 5 | RNVC: 2

13 Oct 1984

5340-12-348-0432
Double Angle Bracket

123480432
18R059-84611-2: RNCC: 3 | RNVC: 2
58R059-84611-2: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-12-365-3314
Access Cover

123653314
2500278-191910.000.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-345-3758
Access Cover

123453758
2300002-181911.001: RNCC: 2 | RNVC: 2
2300002-181911.001: RNCC: 3 | RNVC: 2

10 Mar 1998

5340-12-338-8337
Angle Bracket

123388337
463-223010.003: RNCC: 3 | RNVC: 9
9896436: RNCC: 5 | RNVC: 9

30 Aug 1995

5340-12-328-3895
Dust And Moisture Seal Protective Cap

123283895
210 340: RNCC: 3 | RNVC: 2
1-3018-13-4: RNCC: 5 | RNVC: 2

13 May 1992

5340-12-329-5152
Webbing Strap

123295152
4900209-202300.02: RNCC: 2 | RNVC: 2
0106.33002.000: RNCC: 3 | RNVC: 2

26 Aug 1992

5340-12-309-5613
Angle Bracket

123095613
5800267-159.1: RNCC: 2 | RNVC: 2
C22155-A3-C134: RNCC: 3 | RNVC: 2
5800267-159.1: RNCC: 5 | RNVC: 2
C22155-A3- C134: RNCC: 5 | RNVC: 9

4 Feb 1987

5340-12-307-0444
Plug Button

123070444
43-1119-285000.03.0: RNCC: 3 | RNVC: 2

30 Apr 1986

5340-12-178-8481
Strap Fastener Loop

121788481
23111-4617.02: RNCC: 2 | RNVC: 2
23111-4617.02: RNCC: 3 | RNVC: 2
23111-4617-02: RNCC: 5 | RNVC: 9
23111-4617-02: RNCC: 5 | RNVC: 9
23111-4617.02: RNCC: 5 | RNVC: 9

18 May 1979

5340-12-167-5491
Mending Plate

121675491
3554946: RNCC: 3 | RNVC: 2
3554946: RNCC: 5 | RNVC: 2
2853-3300-00: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-324-9765
Nonmetallic Bumper

123249765
P-990551-405-99U-008-19: RNCC: 3 | RNVC: 2

17 Apr 1991

5340-12-393-6208
Mending Plate

123936208
A-0261-001-08: RNCC: 3 | RNVC: 2

27 Sep 2013

5340-12-191-4023
Retaining Strap

121914023
C247-A10-B23: RNCC: 2 | RNVC: 2
C247-A10-B23: RNCC: 3 | RNVC: 2
C247-A10-B23: RNCC: 5 | RNVC: 2
C247A10B23: RNCC: 5 | RNVC: 2
C247A10B23: RNCC: 5 | RNVC: 2

1 Feb 1982

5340-12-305-3785
Dust And Moisture Seal Protective Plug

123053785
P-730002-405-32H-001-157E: RNCC: 3 | RNVC: 2

29 Oct 1985

5340-12-156-5166
Mending Plate

121565166
2360-061330.02.0: RNCC: 2 | RNVC: 2
2360-061330.02.0: RNCC: 3 | RNVC: 2
2360-061330-02-0: RNCC: 5 | RNVC: 2
2360-061330-02-0: RNCC: 5 | RNVC: 2
2360-061330.02.0: RNCC: 5 | RNVC: 2
2360-061330-02-0: RNCC: 5 | RNVC: 9
2360-061330.02.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-8745
Access Cover

123188745
2300264-066000.01.0: RNCC: 2 | RNVC: 2
2300264-066000.01.0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-319-5304
Access Cover

123195304
2300232-185113.000.0: RNCC: 2 | RNVC: 2
2300232-185113.000.0: RNCC: 3 | RNVC: 2
2300232-185113.000.02: RNCC: 5 | RNVC: 9

10 Oct 1989

5340-12-136-3772
Expansion Plug

121363772
DIN470-12-ST-BL: RNCC: 2 | RNVC: 2
12DIN470: RNCC: 5 | RNVC: 2
12DIN470R0H: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-193-6818
Strap Bolt

121936818
23176-261800.02.0: RNCC: 2 | RNVC: 2
23176-261800.02.0: RNCC: 3 | RNVC: 2
23176-261800.02.0: RNCC: 3 | RNVC: 2
23176-261800-02-0: RNCC: 5 | RNVC: 9
23176-261800.02.0: RNCC: 5 | RNVC: 9

19 Aug 1982

5340-12-329-7577
Runner

123297577
M-APT-000000-40674-008: RNCC: 3 | RNVC: 2
M-APT-000000-40674: RNCC: 5 | RNVC: 2
M-APT-000000-40674-008: RNCC: 5 | RNVC: 9
M-APT-000000-40674: RNCC: 5 | RNVC: 9

24 Sep 1992

5340-12-393-2799
Rod End Clevis

123932799
100243050832/000: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-12-308-3173
Manual Control Handle

123083173
2300223-183010.00.0: RNCC: 2 | RNVC: 2
2300223-183010.00.0: RNCC: 3 | RNVC: 2

25 Sep 1986

5340-12-184-1896
Pipe Bracket

121841896
255-1252-000: RNCC: 3 | RNVC: 2
113905451A: RNCC: 5 | RNVC: 2

3 Jul 1980

5340-12-318-6845
Angle Bracket

123186845
704-172214-901-0: RNCC: 3 | RNVC: 2

8 Aug 1989

5340-12-123-3175
Leather Strap

121233175
E5565-10-07: RNCC: 3 | RNVC: 2
0344 5043: RNCC: 3 | RNVC: 2
5565-10-07.10: RNCC: 5 | RNVC: 2
E5565-10-07-10: RNCC: 5 | RNVC: 2
5565-10-007.010: RNCC: 5 | RNVC: 2
5565-10-07-10: RNCC: 5 | RNVC: 2
3445043: RNCC: 5 | RNVC: 2
3445043KZ5565-10: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-168-5649
Pad Eye

121685649
1000025-100000.09: RNCC: 2 | RNVC: 2
1000025-100000.09: RNCC: 3 | RNVC: 2
113642: RNCC: 5 | RNVC: 2
1000025-100000.09: RNCC: 5 | RNVC: 9
1000025-100000-09: RNCC: 5 | RNVC: 9
1000025-100000-09: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-313-1274
Mounting Bracket

123131274
999712-121000.28: RNCC: 3 | RNVC: 2

5 Mar 1988

5340-12-359-7512
Mounting Bracket

123597512
J29120462-403: RNCC: 3 | RNVC: 2

7 Mar 2003

5340-12-176-4880
Helical Compression Spring Seat

121764880
0214 4876: RNCC: 3 | RNVC: 2
2144876EE0148-08: RNCC: 5 | RNVC: 2
2144876: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-300-2318
Nonmetallic Bumper

123002318
23114-2410.02: RNCC: 2 | RNVC: 2
23114-2410.02: RNCC: 3 | RNVC: 2
837-23114-2410.02.NBR60: RNCC: 3 | RNVC: 2
23114-2410.02: RNCC: 5 | RNVC: 2
23114-2410-02: RNCC: 5 | RNVC: 9
23114-2410.02: RNCC: 5 | RNVC: 9
23114-2410-02: RNCC: 5 | RNVC: 9

17 Jul 1984

5340-12-188-1082
Snap Hook

121881082
DIN5299-E60CD: RNCC: 2 | RNVC: 2
DIN5299-E60-CD: RNCC: 3 | RNVC: 2
3210019: RNCC: 3 | RNVC: 2
Y226-60X6 VERCADMET: RNCC: 3 | RNVC: 9
C123-Z16-C28: RNCC: 5 | RNVC: 2
DIN5299E60CD: RNCC: 5 | RNVC: 2
C123-Z16-C28: RNCC: 5 | RNVC: 2
226-60X6 VERCADMET: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-12-321-3520
Plain Solid Disk

123213520
00480-292-000: RNCC: 3 | RNVC: 2
480-292: RNCC: 5 | RNVC: 9

9 May 1990

5340-12-342-4490
Webbing Strap

123424490
A 1326-7000: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-12-324-8132
Mounting Plate

123248132
702-444400-951-0: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-12-383-2704
Handle Grip

123832704
N09FT-12Z01-V01: RNCC: 3 | RNVC: 2

30 Sep 2010

5340-12-317-3240
Strap Hinge

123173240
4900064-4124.004: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-387-5610
Handle Grip

123875610
GN598-KU-31-M12: RNCC: 3 | RNVC: 2
11-065-31 M12: RNCC: 5 | RNVC: 2

10 Jan 2012

5340-12-393-7629
Mounting Bracket

123937629
11.44143-0027: RNCC: 3 | RNVC: 2
11.44143-0027: RNCC: 5 | RNVC: 2

9 Oct 2013

5340-12-321-7008
Electrical-Mechanical Equipment Post

123217008
1022-U2: RNCC: 3 | RNVC: 2
0.29.1370.0: RNCC: 3 | RNVC: 2
220-9102: RNCC: 3 | RNVC: 2

18 Jun 1990

5340-12-388-3920
Spacing Threaded Standoff

123883920
58R065-261-3: RNCC: 2 | RNVC: 2
58R065-261-3: RNCC: 3 | RNVC: 2
40024669: RNCC: 5 | RNVC: 2

16 Mar 2012

5340-12-302-9404
Handle Grip

123029404
4-181240: RNCC: 3 | RNVC: 2
284868: RNCC: 5 | RNVC: 2
AR-LIN22.1.2: RNCC: 5 | RNVC: 9

11 Feb 1985

5340-12-379-3271
Access Cover

123793271
2500298-191720.000.0: RNCC: 3 | RNVC: 2

14 Jul 2009

5340-12-386-1288
Access Cover

123861288
2500262-064300.000.0: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-12-320-4458
T Bracket

123204458
335946-0504.000: RNCC: 2 | RNVC: 2
335946-0504.000: RNCC: 3 | RNVC: 2
335946-0504.000: RNCC: 5 | RNVC: 9

16 Jan 1990

5340-12-390-1427
Mounting Bracket

123901427
2300559-186200.010.0: RNCC: 2 | RNVC: 2
2300559-186200.010.0: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-12-351-2241
Friction Catch

123512241
2500113-2411: RNCC: 2 | RNVC: 2
2500113-2411: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-196-5663
Webbing Strap

121965663
5801536-1154: RNCC: 2 | RNVC: 2
5801536-1154: RNCC: 3 | RNVC: 2
5801536-1154: RNCC: 3 | RNVC: 2
5801536-1154: RNCC: 5 | RNVC: 9
5801536-1154: RNCC: 5 | RNVC: 9
000-A2-20X2,0X1200-PE-RAL6031: RNCC: 6 | RNVC: 9

18 Jul 1983

5340-12-356-5811
Mending Plate

123565811
028013122: RNCC: 3 | RNVC: 2
496-0177-01-00-001: RNCC: 5 | RNVC: 2
028013122: RNCC: 5 | RNVC: 9

13 Mar 2002

5340-12-321-3831
Double Angle Bracket

123213831
G32960-V0081-B17: RNCC: 3 | RNVC: 2

11 May 1990

5340-12-321-3779
Rim Latch

123213779
VG95211-ML-123213779: RNCC: 2 | RNVC: 2
510252-0503.010: RNCC: 3 | RNVC: 2

11 May 1990

5340-12-336-9967
Angle Bracket

123369967
81974870398: RNCC: 3 | RNVC: 2
81.97487-0398: RNCC: 5 | RNVC: 2

9 Jan 1995

5340-12-354-8311
Mounting Bracket

123548311
5400049-521073.00: RNCC: 2 | RNVC: 2
5400049-521073.00: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-388-7648
Angle Bracket

123887648
601243-201300.01: RNCC: 2 | RNVC: 2
601243-201300.01: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-369-8405
Access Cover

123698405
SK872-192300.000.0: RNCC: 3 | RNVC: 2
7081485: RNCC: 5 | RNVC: 2

21 Aug 2006

5340-12-360-7723
Access Cover

123607723
2500305-183580.000.0: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-183-2314
Strap Hinge

121832314
1000093-32260.00.0: RNCC: 2 | RNVC: 2
1000093-32260.00.0: RNCC: 3 | RNVC: 2
1000093-32260-00-0: RNCC: 5 | RNVC: 2
1000093-32260-00-0: RNCC: 5 | RNVC: 9
1000093-32260.00.0: RNCC: 5 | RNVC: 9

28 Mar 1980

5340-12-178-9093
Mending Plate

121789093
5561214/4: RNCC: 3 | RNVC: 2
5561214-4: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-354-6114
Dust And Moisture Seal Protective Plug

123546114
260Q4545: RNCC: 3 | RNVC: 2
6.368-160.0: RNCC: 5 | RNVC: 2
GPN260Q4545: RNCC: 5 | RNVC: 2
260Q4545: RNCC: 5 | RNVC: 2
GPN260Q4545: RNCC: 5 | RNVC: 2
26045450000: RNCC: 5 | RNVC: 9

8 Aug 2001

5340-12-305-7123
Angle Bracket

123057123
4900059-342000.019.0: RNCC: 2 | RNVC: 2
4900059-342000.019.0: RNCC: 3 | RNVC: 2
1226837: RNCC: 5 | RNVC: 2

6 Dec 1985

5340-12-371-2185
Manual Control Handle

123712185
GN563-67-M8: RNCC: 3 | RNVC: 2
6.321-168.0: RNCC: 5 | RNVC: 2

1 Mar 2007

5340-12-195-2113
Electrical-Mechanical Equipment Post

121952113
VG95148B5XM3X10,5-AL: RNCC: 2 | RNVC: 2
VG95148B5XM3X10,5-AL: RNCC: 3 | RNVC: 2
4696047: RNCC: 3 | RNVC: 2
469.6047: RNCC: 5 | RNVC: 2
5801443-110000-007: RNCC: 5 | RNVC: 9

26 Jan 1983

5340-12-134-9274
Handwheel

121349274
1202 4433: RNCC: 3 | RNVC: 2
12024433: RNCC: 5 | RNVC: 2
26.42-113.3: RNCC: 5 | RNVC: 2
26-42-113-3: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-9451
Mending Plate

121969451
4900059-211239.003.0: RNCC: 3 | RNVC: 2
4900059-211239-003-0: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-196-5761
Spring Tension Clip

121965761
C22136-A1000-C399: RNCC: 3 | RNVC: 2
C22136A1000C399: RNCC: 5 | RNVC: 2

19 Jul 1983

5340-12-152-2976
Loop Clamp

121522976
5800400-0060-003: RNCC: 3 | RNVC: 2
6P358-60-3: RNCC: 5 | RNVC: 2
5800400-0060-003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-700-2842
Turnbuckle Body

127002842
512624280044: RNCC: 2 | RNVC: 2
765.58.159K: RNCC: 3 | RNVC: 2
765-58-159: RNCC: 5 | RNVC: 9

27 Nov 1991

5340-12-322-8592
Loop Clamp

123228592
C22195-Z1-C1: RNCC: 3 | RNVC: 2

28 Sep 1990

5340-12-159-0682
Loop Clamp

121590682
10-95-05-01: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-197-0709
Dust And Moisture Seal Protective Cap

121970709
7820346283: RNCC: 2 | RNVC: 2
7820346283: RNCC: 3 | RNVC: 2
78203 46283: RNCC: 5 | RNVC: 9

15 Sep 1983

5340-12-369-0128
Angle Bracket

123690128
7803062075: RNCC: 2 | RNVC: 2
7803062075: RNCC: 3 | RNVC: 2

12 May 2006

5340-12-378-5019
Bumper

123785019
4000008127: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-12-378-3017
Dust And Moisture Seal Protective Plug

123783017
17883687: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-12-363-3317
Extension Drawer Slide

123633317
423.20.552: RNCC: 3 | RNVC: 2
81668020079: RNCC: 5 | RNVC: 2

27 May 2004

5340-12-349-8471
Multiple Angle Bracket

123498471
0044-602100A11B: RNCC: 3 | RNVC: 2

17 Jan 2000

5340-12-356-1452
Loop Clamp

123561452
0004900741: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-024-8031

5340-12-344-2245

5340-12-040-4269

5340-12-190-2145
Catch Strike

121902145
5801445-30010.09: RNCC: 2 | RNVC: 2
5801445-30010.09: RNCC: 3 | RNVC: 2
5801445-30010.09: RNCC: 5 | RNVC: 9

12 Nov 1981

5340-12-321-1783
Spring Loaded Cylinder Fastener

123211783
2500067-101140.00: RNCC: 2 | RNVC: 2
2500067-101140.00: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-12-702-3798
Rod End Connector

127023798
VG95211-ML-127023798: RNCC: 2 | RNVC: 2
5.12.5101.5000.97: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-351-1626
Mending Plate

123511626
2812-022200.008.0: RNCC: 2 | RNVC: 2
2812-022200.008.0: RNCC: 3 | RNVC: 2

27 Jun 2000

5340-12-381-0063
Dust And Moisture Seal Protective Plug

123810063
5.132-019.0: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-12-352-4242
Mounting Bracket

123524242
5600023-190118.000.0: RNCC: 2 | RNVC: 2
5600023-190118.000.0: RNCC: 3 | RNVC: 2
1596675: RNCC: 5 | RNVC: 2

17 Nov 2000

5340-12-185-7188
Mounting Bracket

121857188
23176-262120.03.0: RNCC: 2 | RNVC: 2
23176-262120.03.0: RNCC: 5 | RNVC: 2
23176-262120-03-0: RNCC: 5 | RNVC: 9
23176-262120.03.0: RNCC: 5 | RNVC: 9
23176-262120-03-0: RNCC: 5 | RNVC: 9
23176-262120-03-0: RNCC: 5 | RNVC: 9

25 Oct 1980

5340-12-184-8877
Metal Runner

121848877
CF205504AU: RNCC: 3 | RNVC: 2
CF 205 504 AU: RNCC: 5 | RNVC: 2
CF205504AU: RNCC: 5 | RNVC: 2
CF 205 504 AU: RNCC: 5 | RNVC: 2

26 Aug 1980

5340-12-315-4739
Spring Tension Clip

123154739
3112: RNCC: 3 | RNVC: 2
5000415662: RNCC: 5 | RNVC: 2

26 Oct 1988

5340-12-136-3539
Retaining Strap

121363539
269011050076: RNCC: 3 | RNVC: 2
269011050076: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-043-2698

5340-12-145-6184
Webbing Strap

121456184
23176-262139.00.0: RNCC: 2 | RNVC: 2
82300-23176-262139.00.0: RNCC: 3 | RNVC: 2
23176-262139-00-0: RNCC: 5 | RNVC: 2
23176-262139-00-0: RNCC: 5 | RNVC: 9
23176-262139.00.0: RNCC: 5 | RNVC: 9
82300-A150X20-NBR-ST-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-306-1339
Plain Solid Disk

123061339
47957-001: RNCC: 3 | RNVC: 2
47 957-001: RNCC: 5 | RNVC: 9

30 Jan 1986

5340-12-177-4137
Angle Bracket

121774137
2300002-241000.003: RNCC: 2 | RNVC: 2
2300002-241000.003: RNCC: 3 | RNVC: 2
2300002-241000.003: RNCC: 3 | RNVC: 2
2300002-241000.003: RNCC: 5 | RNVC: 9
2300002-241000-003: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-300-2170
Retaining Strap

123002170
23114-2806.37: RNCC: 2 | RNVC: 2
23114-2806.37: RNCC: 3 | RNVC: 2
23114-2806-37: RNCC: 5 | RNVC: 9
23114-2806-37: RNCC: 5 | RNVC: 9
23114-2806.37: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-318-7234
Mounting Bracket

123187234
2016.0610: RNCC: 3 | RNVC: 2
2016.0610: RNCC: 3 | RNVC: 2
2016 0610: RNCC: 5 | RNVC: 2
19343481402-L0009: RNCC: 5 | RNVC: 2
KS/RAT/45: RNCC: 5 | RNVC: 2

9 Aug 1989

5340-12-336-5487
Spring Tension Clip

123365487
01 52 000. 8U5-2: RNCC: 3 | RNVC: 2
B-296 949: RNCC: 5 | RNVC: 2
B296949: RNCC: 5 | RNVC: 2
B-296949: RNCC: 5 | RNVC: 2
01 52 000. 8U5-2: RNCC: 5 | RNVC: 9
46953: RNCC: 5 | RNVC: 9

25 Nov 1994

5340-12-147-4650
Nonmetallic Bumper

121474650
DIN95364-G80X80X30-CR65ST: RNCC: 2 | RNVC: 2
25443BSMQ6590: RNCC: 5 | RNVC: 2
25443SMQ650: RNCC: 5 | RNVC: 2
551013-M12X35.CR65.ST: RNCC: 5 | RNVC: 2
25443-80SMQ50: RNCC: 5 | RNVC: 2
93274-05-7: RNCC: 5 | RNVC: 2
25443-SMQ650: RNCC: 5 | RNVC: 2
25443,CR65ST: RNCC: 5 | RNVC: 2
VG95364-G80X30-CR65ST: RNCC: 5 | RNVC: 9
VG95364-G80X80X30-CR65ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-327-5801
Handle Grip

123275801
4.1875-02: RNCC: 3 | RNVC: 2
4.1875: RNCC: 5 | RNVC: 2
81.97001-0340: RNCC: 5 | RNVC: 2
81970010340: RNCC: 5 | RNVC: 2

4 Feb 1992

5340-12-352-5604
Retaining Bail

123525604
521910-190520.009.0: RNCC: 2 | RNVC: 2
521910-190520.009.0: RNCC: 3 | RNVC: 2

27 Nov 2000

5340-12-308-3710
Electrical-Mechanical Equipment Post

123083710
VG95148B6XM2,5X17,5-ST: RNCC: 2 | RNVC: 2
VG95148B6XM2,5X17,5-ST: RNCC: 3 | RNVC: 2
701-731 000.03.0: RNCC: 3 | RNVC: 2
701-731 000.03.0: RNCC: 5 | RNVC: 9

3 Oct 1986

5340-12-188-0418
Loop Clamp

121880418
DIN3016-1-E1-40X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU0.40/15: RNCC: 3 | RNVC: 2
DIN3016-E1-40X15-W1-2: RNCC: 3 | RNVC: 2
9400015040: RNCC: 5 | RNVC: 2
RSGU40-15: RNCC: 5 | RNVC: 2
RSGU40/15: RNCC: 5 | RNVC: 2
DIN3016-E1-40X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-E40X15-W1: RNCC: 5 | RNVC: 9
VG95931E40X15-W1: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-701-2838
Mounting Bracket

127012838
VG95211-ML-127012838: RNCC: 2 | RNVC: 2
5.12.5101.0930.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-3504
Dust And Moisture Seal Protective Cap

121963504
P-855242-001: RNCC: 3 | RNVC: 2
P855242-001: RNCC: 5 | RNVC: 2

29 Jun 1983

5340-12-344-4724
Mechanical Stop

123444724
A-233235-027: RNCC: 3 | RNVC: 2
A233235-027: RNCC: 5 | RNVC: 2

30 Oct 1997

5340-12-178-9243
Nonmetallic Bumper

121789243
2300109-034310.001.0: RNCC: 2 | RNVC: 2
2300109-034310.001.0: RNCC: 3 | RNVC: 2
2300109-034310-001-0: RNCC: 5 | RNVC: 2
2300109-034310.001.0: RNCC: 5 | RNVC: 2
2300109-034310-001-0: RNCC: 5 | RNVC: 2
2300109-034310-001-0: RNCC: 5 | RNVC: 9
2300109-034310.001.0: RNCC: 5 | RNVC: 9

25 May 1979

5340-12-329-0483
Support Hook

123290483
1080500: RNCC: 3 | RNVC: 2
283525: RNCC: 5 | RNVC: 2
1-4037-8-4: RNCC: 5 | RNVC: 2
080500: RNCC: 5 | RNVC: 9

14 Jul 1992

5340-12-348-9869
Runner

123489869
245/7346-46-00-92: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-319-7824
Mounting Bracket

123197824
2654-335300.00: RNCC: 2 | RNVC: 2
2654-335300.00: RNCC: 3 | RNVC: 2
2654-335 300.00: RNCC: 5 | RNVC: 9
679-06040000: RNCC: 5 | RNVC: 9
679-06040000: RNCC: 5 | RNVC: 9

6 Nov 1989

5340-12-325-4214
Plain Solid Disk

123254214
51034-5X3: RNCC: 3 | RNVC: 2
VA-PVC 5X3: RNCC: 5 | RNVC: 2

5 Jun 1991

5340-12-191-8931
Bow Handle

121918931
C42300-A67-B50: RNCC: 3 | RNVC: 2
C42300A67B50: RNCC: 5 | RNVC: 2

16 Mar 1982

5340-12-700-1931
Access Cover

127001931
51-261000054: RNCC: 2 | RNVC: 2
765-50-SB684: RNCC: 3 | RNVC: 2

4 Nov 1991

5340-12-189-7690
Hand Crank

121897690
VG85086-A-63X7-AM: RNCC: 2 | RNVC: 2
VG85086-A-63X7-AM: RNCC: 3 | RNVC: 2
VG85086-A-63X7-AM: RNCC: 3 | RNVC: 2
VG85086-A-63X7-AM: RNCC: 3 | RNVC: 9
A63X7VG85086GCUSN5ZNPB: RNCC: 5 | RNVC: 9
A63X7VG85086-RG5: RNCC: 5 | RNVC: 9
A63X7VG85086GCUSN5ZNPB: RNCC: 5 | RNVC: 9
A63X7VG85086RG5: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-300-3641
Clamping Catch

123003641
V96L01-1-1AJ: RNCC: 3 | RNVC: 2
96L01-1-1AI: RNCC: 5 | RNVC: 2
0745231217: RNCC: 5 | RNVC: 2
V96L01-1-1AI: RNCC: 5 | RNVC: 2
1516L01-1-1AC: RNCC: 5 | RNVC: 9

27 Jul 1984

5340-12-198-0638
Mending Plate

121980638
1900044-135: RNCC: 2 | RNVC: 2
010602-0710.02: RNCC: 3 | RNVC: 2
8.07.27.09.0: RNCC: 5 | RNVC: 2

15 Dec 1983

5340-12-174-9675
Escutcheon Plate

121749675
494-612-00-00: RNCC: 3 | RNVC: 2
81623860054: RNCC: 3 | RNVC: 2
81.62386-0027: RNCC: 5 | RNVC: 2
81623860027: RNCC: 5 | RNVC: 2
4609840037: RNCC: 5 | RNVC: 2
460 984 00 37: RNCC: 5 | RNVC: 2
460 984 00 37: RNCC: 5 | RNVC: 2
494-612-00-00: RNCC: 5 | RNVC: 9
721 1 74 1531: RNCC: 5 | RNVC: 9
S721 1 74 1531: RNCC: 5 | RNVC: 9

15 Aug 1978

5340-12-190-0437
Helical Compression Spring Seat

121900437
11.20009-9074: RNCC: 3 | RNVC: 2
1410500035: RNCC: 3 | RNVC: 2
BOSCH-1.410.500.035: RNCC: 5 | RNVC: 2
EPMS135P1X313: RNCC: 5 | RNVC: 2
RAR3412: RNCC: 5 | RNVC: 2
DLT611359: RNCC: 5 | RNVC: 2
BOSCH-1.410.500.035: RNCC: 5 | RNVC: 2
0242005: RNCC: 5 | RNVC: 2
23310148020: RNCC: 5 | RNVC: 2
242005: RNCC: 5 | RNVC: 9

4 Nov 1981

5340-12-343-0891
Resilient Mount

123430891
0818 9379: RNCC: 3 | RNVC: 2
08189379: RNCC: 5 | RNVC: 2
8189379EZ50-5740: RNCC: 5 | RNVC: 2

28 Apr 1997

5340-12-388-6352
Nonmetallic Solid Wheel

123886352
01-291534-001: RNCC: 3 | RNVC: 2

5 Apr 2012

5340-12-354-4857
Dust And Moisture Seal Protective Cover

123544857
918322-17: RNCC: 3 | RNVC: 2

18 Jul 2001

5340-12-302-5241
Gummi- Riemen

123025241
1-2728-9-3: RNCC: 2 | RNVC: 2
1-2728-9-3: RNCC: 3 | RNVC: 2
82300-1-2728-9-3: RNCC: 5 | RNVC: 2
1-2728-9-3: RNCC: 5 | RNVC: 9

10 Jan 1985

5340-12-378-3021
Access Cover

123783021
9997023-202100.002.0: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-12-702-4004
Mounting Bracket

127024004
VG95211-ML-127024004: RNCC: 2 | RNVC: 2
5.12.5313.1330.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-373-7246
Mounting Plate

123737246
5.001-026.0: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-12-361-4566
Manual Control Handle

123614566
2500262-190540.005.0: RNCC: 2 | RNVC: 2
2500262-190540.005.0: RNCC: 3 | RNVC: 2

6 Oct 2003

5340-12-162-6701
Door Handle

121626701
16-016-501-3: RNCC: 3 | RNVC: 2
81.62641-0033: RNCC: 5 | RNVC: 2
81626410033: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-166-4955
Dust And Moisture Seal Protective Plug

121664955
0996 2056: RNCC: 3 | RNVC: 2
6.0280.03.7.0401: RNCC: 3 | RNVC: 9
6-0280-03-7-0401: RNCC: 5 | RNVC: 9

15 Sep 1976

5340-12-352-9086
Nut And Bolt Locking Plate

123529086
9997023-205000.002.0: RNCC: 3 | RNVC: 2

4 Jan 2001

5340-12-331-6313
Mounting Bracket

123316313
702-132400-905-0: RNCC: 3 | RNVC: 2

2 Jun 1993

5340-12-181-2818
Mending Plate

121812818
1361044-12000-08: RNCC: 3 | RNVC: 2

9 Nov 1979

5340-12-362-2743
Double Angle Bracket

123622743
J21520155-401: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-342-9923
Resilient Mount

123429923
5084-245: RNCC: 3 | RNVC: 2

21 Apr 1997

5340-12-198-9405
Rigid Caster

121989405
588.90-211720-000: RNCC: 3 | RNVC: 2

14 Mar 1984

5340-12-383-1984
Metal Grille

123831984
5371-152300D00C: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-12-164-5757
Butt Hinge Leaf

121645757
730024-30.11: RNCC: 2 | RNVC: 2
730024-30-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-336-5944
Retaining Band

123365944
260-01/64606: RNCC: 3 | RNVC: 2
260-01/64606: RNCC: 5 | RNVC: 9

29 Nov 1994

5340-12-331-2740
Mounting Bracket

123312740
U100-1702-001: RNCC: 2 | RNVC: 2
U100-1702-001: RNCC: 3 | RNVC: 2
U100-1702-001: RNCC: 5 | RNVC: 2

15 Apr 1993

5340-12-163-0941
Loop Clamp

121630941
11.43386-0069: RNCC: 3 | RNVC: 2
11-43386-0069: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-327-8101
Mounting Plate

123278101
C42080-A34-C36: RNCC: 2 | RNVC: 2
C42080-A34-C36: RNCC: 3 | RNVC: 2

7 Mar 1992

5340-12-384-2328
Mounting Bracket

123842328
SK1331-977232.000.0: RNCC: 3 | RNVC: 2

4 Feb 2011

5340-12-332-4373
Mounting Bracket

123324373
5-441-740: RNCC: 3 | RNVC: 2
441 740: RNCC: 5 | RNVC: 9
5-441 740: RNCC: 5 | RNVC: 9
5-441740: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-12-307-6576
Mending Plate

123076576
537161-4273.000: RNCC: 3 | RNVC: 2
537161-4273: RNCC: 5 | RNVC: 9
537161-4273.000: RNCC: 5 | RNVC: 9

14 Jul 1986

5340-12-320-5068
Shimmy Damper

123205068
094943: RNCC: 3 | RNVC: 2
0223065F00: RNCC: 5 | RNVC: 2
094943-0308250: RNCC: 5 | RNVC: 9

22 Jan 1990

5340-12-330-8798
Nonmetallic Bumper

123308798
480-7347-10-00-12: RNCC: 3 | RNVC: 2
480/7347-10-00-12: RNCC: 5 | RNVC: 2

18 Feb 1993

5340-12-163-9382
Catch Strike

121639382
NO PRIMARY REF 12-163-9382: RNCC: 3 | RNVC: 2
7101 123854: RNCC: 5 | RNVC: 9
7101123854: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-4474
Mending Plate

123174474
E4-2052701: RNCC: 2 | RNVC: 2
E4-2052701: RNCC: 3 | RNVC: 2
E4-2052701: RNCC: 5 | RNVC: 9

10 Apr 1989

Load More Results