What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 17 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 17 of 178

5340-12-701-7927
Mounting Plate

127017927
VG95211-ML-127017927: RNCC: 2 | RNVC: 2
5.12.7904.8051.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-325-1159
Bow Handle

123251159
VG95149A104,8X48XM4AL-LQ: RNCC: 2 | RNVC: 2
35633075: RNCC: 3 | RNVC: 2
RA-10.104,8.M4.56.LACKIERT: RNCC: 3 | RNVC: 2
66.3578.300.06-A002: RNCC: 5 | RNVC: 2

6 May 1991

5340-12-307-9356
Shimmy Damper

123079356
14-27-400-1/500-500-900 WG-WG: RNCC: 3 | RNVC: 2
14-28-400-1/500-550-950-WG-WG: RNCC: 3 | RNVC: 2
14.27-400-1/50-500-900-WG-WG: RNCC: 5 | RNVC: 2
14-27-400-1/500-500-900-WG-WG: RNCC: 5 | RNVC: 2
4022.7901.2: RNCC: 5 | RNVC: 2
4-7-400-1/50-500-900WG-WG: RNCC: 5 | RNVC: 9
4-7-400-1/50-500-900 WG-WG: RNCC: 5 | RNVC: 9
14-27-400-1/50-500-900WG-WG: RNCC: 5 | RNVC: 9

12 Aug 1986

5340-12-323-8493
Manual Control Handle

123238493
2S51540-0003: RNCC: 3 | RNVC: 2

27 Dec 1990

5340-12-342-5694
Double Angle Bracket

123425694
463-151518.000: RNCC: 3 | RNVC: 9
9897770: RNCC: 5 | RNVC: 9

28 Feb 1997

5340-12-318-8859
Access Cover

123188859
011/040540-086.9: RNCC: 3 | RNVC: 2
011/040540.086.9: RNCC: 5 | RNVC: 9

23 Aug 1989

5340-12-336-7164
Mounting Plate

123367164
2300348-187000.009.0: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-12-326-1837
Dust And Moisture Seal Protective Cap

123261837
8098 040 121: RNCC: 3 | RNVC: 2
(241)A39630-111432: RNCC: 5 | RNVC: 2
0-111432: RNCC: 5 | RNVC: 2
8098 040 121: RNCC: 5 | RNVC: 2
0066330: RNCC: 5 | RNVC: 2
1PA39630-111432: RNCC: 8 | RNVC: 2

15 Aug 1991

5340-12-171-5191
Bow Handle

121715191
81970015044: RNCC: 3 | RNVC: 2
81.97001-5044: RNCC: 5 | RNVC: 2
23230-172292-000-0: RNCC: 5 | RNVC: 9
23230-172292.000.0: RNCC: 5 | RNVC: 9

20 Oct 1977

5340-12-356-5814
Hand Crank

123565814
028013355: RNCC: 3 | RNVC: 2
028013355: RNCC: 5 | RNVC: 9
496-0177-06-05-000: RNCC: 5 | RNVC: 9

13 Mar 2002

5340-12-169-3750
Nonmetallic Bumper

121693750
DIN95364-F50X67-NR70ST: RNCC: 2 | RNVC: 2
1.50.67.4F.70NR/ST: RNCC: 5 | RNVC: 2
811.040.050.067.08X36.NR70.ST: RNCC: 5 | RNVC: 2
81140-50X67-M8X36.NR70.ST: RNCC: 5 | RNVC: 2
741280HART: RNCC: 5 | RNVC: 2
57412800010: RNCC: 5 | RNVC: 2
K.P.50.67.D.70NRST: RNCC: 5 | RNVC: 9
VG95364-F50X67-NR70ST: RNCC: 5 | RNVC: 9
VG95364F50X67NR70ST: RNCC: 5 | RNVC: 9

11 May 1977

5340-12-177-8191
Spring Tension Clip

121778191
1006000010: RNCC: 3 | RNVC: 2
1006000010-002: RNCC: 3 | RNVC: 2
10SXN06: RNCC: 5 | RNVC: 2
100600000010/002: RNCC: 5 | RNVC: 2
10MBO06: RNCC: 5 | RNVC: 2
10MBO06 PHOSPH.: RNCC: 5 | RNVC: 2
10MBO06PHOSPHATIERT: RNCC: 5 | RNVC: 2
1006000010: RNCC: 5 | RNVC: 2
10ESN06: RNCC: 5 | RNVC: 2

28 Feb 1979

5340-12-177-8280
Nonmetallic Bumper

121778280
2300002-204100.001: RNCC: 2 | RNVC: 2
2300002-204100.001: RNCC: 3 | RNVC: 2
2300002-204100.001: RNCC: 5 | RNVC: 9
2300002-204100-001: RNCC: 5 | RNVC: 9

28 Feb 1979

5340-12-339-8076
Access Cover

123398076
6600084-110430: RNCC: 2 | RNVC: 2
6600084-110430: RNCC: 3 | RNVC: 2
6600084-110430: RNCC: 5 | RNVC: 9

19 Jan 1996

5340-12-702-4613
Lock-Release Lever

127024613
VG95211-ML-127024613: RNCC: 2 | RNVC: 2
5.51.0603.1106.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-347-8403
Loop Clamp

123478403
RAP-12-655: RNCC: 3 | RNVC: 2
249134015: RNCC: 5 | RNVC: 2

22 Feb 1999

5340-12-390-2747
Manual Control Handle

123902747
GN125-36-M10-D: RNCC: 3 | RNVC: 2

24 Oct 2012

5340-12-309-3902
Snap Hook

123093902
VE01215-4: RNCC: 3 | RNVC: 2
01215-4: RNCC: 5 | RNVC: 2
71043: RNCC: 5 | RNVC: 2
028250: RNCC: 5 | RNVC: 2
DIN60060-D1-50MM: RNCC: 5 | RNVC: 9

21 Jan 1987

5340-12-185-0512
Dust And Moisture Seal Protective Cap

121850512
111941605A: RNCC: 3 | RNVC: 2
9GH116966-01: RNCC: 5 | RNVC: 2

6 Sep 1980

5340-12-333-3940
Webbing Strap

123333940
3900096-110000.00: RNCC: 2 | RNVC: 2
3900096-110000.00: RNCC: 3 | RNVC: 2
58 369: RNCC: 5 | RNVC: 2

10 Dec 1993

5340-12-176-3302
Dust And Moisture Seal Protective Cap

121763302
30-79501-0052: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-370-7178
Dust And Moisture Seal Protective Cap

123707178
453 8741-385: RNCC: 3 | RNVC: 2

13 Dec 2006

5340-12-387-4690
Lock Bolt

123874690
8.764.07-256300.02: RNCC: 3 | RNVC: 2

21 Dec 2011

5340-12-702-1654
Angle Bracket

127021654
VG95211-ML-127021654: RNCC: 2 | RNVC: 2
30.7100.1120: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-311-2397
Mounting Bracket

123112397
2500179-000000.005.0: RNCC: 2 | RNVC: 2
2500179-000000.005.0: RNCC: 3 | RNVC: 2

7 Aug 1987

5340-12-361-2950
Mounting Bracket

123612950
J28230068-403: RNCC: 3 | RNVC: 2

15 Sep 2003

5340-12-353-8613
Angle Bracket

123538613
J92222222-401: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-393-7166
Mounting Bracket

123937166
11.44143-0174: RNCC: 3 | RNVC: 2
11.44143-0174: RNCC: 5 | RNVC: 2

7 Oct 2013

5340-12-329-6785
Nonmetallic Bumper

123296785
1000223-1000.02.0: RNCC: 2 | RNVC: 2
1000223-1000.02.0: RNCC: 3 | RNVC: 2
1000223-1000.02.0: RNCC: 5 | RNVC: 2

18 Sep 1992

5340-12-144-6956
Rod End Clevis

121446956
160-25545-02: RNCC: 3 | RNVC: 2
160-25545-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-2087
Mending Plate

123152087
NO PRIMARY REF 12-315-2087: RNCC: 3 | RNVC: 2
7105 179867: RNCC: 5 | RNVC: 9

1 Oct 1988

5340-12-319-5394
Loop Clamp

123195394
2XRAPR16-325 UND APD-A3: RNCC: 3 | RNVC: 2
DSP325PP-DP-AS: RNCC: 3 | RNVC: 2
2XRAPR16-325 UND APD-A3: RNCC: 5 | RNVC: 2
205757-4252: RNCC: 5 | RNVC: 2
DSP325PP-DP-AS: RNCC: 5 | RNVC: 2

10 Oct 1989

5340-12-382-3814
Bail Handle

123823814
0328-005-00: RNCC: 3 | RNVC: 2

14 Jun 2010

5340-12-141-3591
Nonmetallic Bumper

121413591
VG95092B50X40NR70: RNCC: 2 | RNVC: 2
18182FZKN7090: RNCC: 3 | RNVC: 2
82200-B50X40.NR70: RNCC: 3 | RNVC: 2
18182TEFSCHWARZ: RNCC: 5 | RNVC: 2
81.96020-0060: RNCC: 5 | RNVC: 2
322600: RNCC: 5 | RNVC: 2
81960200060: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-316-6292
Mounting Bracket

123166292
5801998-417000.00: RNCC: 2 | RNVC: 2
5801998-417000.00: RNCC: 3 | RNVC: 2

30 Jan 1989

5340-12-175-1278
Spring Tension Clip

121751278
NO PRIMARY REF 12-175-1278: RNCC: 3 | RNVC: 2
0039886778: RNCC: 5 | RNVC: 2
UC73-587K2: RNCC: 5 | RNVC: 9

28 Aug 1978

5340-12-702-8893
Butt Hinge

127028893
25-08301114694: RNCC: 2 | RNVC: 2

12 Mar 1996

5340-12-301-4248
Support Hook

123014248
1300391-220000: RNCC: 2 | RNVC: 2
1640372: RNCC: 3 | RNVC: 2
49.005.22000.00E: RNCC: 5 | RNVC: 9

12 Oct 1984

5340-12-379-3941
Spring Tension Clip

123793941
LN29789-18: RNCC: 2 | RNVC: 2

20 Jul 2009

5340-12-356-7052
Door Button

123567052
2125-120050A01B: RNCC: 2 | RNVC: 2
2125-120050A01B: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-134-6333
Resilient Mount

121346333
992956100200: RNCC: 3 | RNVC: 2
2512-02-42: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-350-2000
Dust And Moisture Seal Protective Cap

123502000
2125-013610.17B: RNCC: 2 | RNVC: 2
2125-013610.17B: RNCC: 3 | RNVC: 2

28 Feb 2000

5340-12-149-8391
Hand Carrying Strap Assembly

121498391
54-1250-200-48: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-305-4155
Angle Bracket

123054155
5802161-201600.01: RNCC: 2 | RNVC: 2
5802161-201600.01: RNCC: 3 | RNVC: 2

4 Nov 1985

5340-12-325-8872
Webbing Strap

123258872
79017/026-0435-0210: RNCC: 3 | RNVC: 2
79017/026-0435-0210: RNCC: 5 | RNVC: 9

18 Jul 1991

5340-12-318-3259
Access Cover

123183259
6600015-20101.005: RNCC: 3 | RNVC: 2
6600015-20101.005: RNCC: 5 | RNVC: 9

30 Jun 1989

5340-12-318-8224
Access Cover

123188224
921-2333-001: RNCC: 3 | RNVC: 2
51.91605-0110: RNCC: 5 | RNVC: 2
51916050110: RNCC: 5 | RNVC: 2

18 Aug 1989

5340-12-350-3834
Section Block Clamp

123503834
J29120344-001: RNCC: 3 | RNVC: 2

23 Mar 2000

5340-12-320-8287
Access Cover

123208287
51-01311: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-12-342-5324
Manual Control Lever

123425324
2300421-181540.000: RNCC: 2 | RNVC: 2
9915778: RNCC: 3 | RNVC: 2
2300421-181540.000: RNCC: 5 | RNVC: 2
2300421-181540.000: RNCC: 5 | RNVC: 9
9915778: RNCC: 5 | RNVC: 9

25 Feb 1997

5340-12-334-5421
Mounting Plate

123345421
E4-2037980: RNCC: 3 | RNVC: 2
E4-2037980: RNCC: 5 | RNVC: 9

20 May 1994

5340-12-328-9558
Pipe Hanger

123289558
HSS210/216: RNCC: 3 | RNVC: 2
HSS210/216: RNCC: 5 | RNVC: 2

3 Jul 1992

5340-12-311-9499
Bow Handle

123119499
10502-051: RNCC: 3 | RNVC: 2

3 Nov 1987

5340-12-314-6692
Electrical-Mechanical Equipment Post

123146692
512214-4508.000: RNCC: 3 | RNVC: 2
512214-4508: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-325-3988
Access Cover

123253988
525311008: RNCC: 3 | RNVC: 2
52 531 1008: RNCC: 5 | RNVC: 2

3 Jun 1991

5340-12-363-0529
Multiple Angle Bracket

123630529
948161677: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-027-6798

5340-12-043-3381

5340-12-178-5567
Extension Drawer Slide Section

121785567
272.311.856: RNCC: 3 | RNVC: 2
2500001-351240-012: RNCC: 5 | RNVC: 9
2500001-351240.012: RNCC: 5 | RNVC: 9
272.311 856: RNCC: 5 | RNVC: 9
272.311856: RNCC: 5 | RNVC: 9
V22-629-21-12: RNCC: 5 | RNVC: 9

3 May 1979

5340-12-355-2119
Loop Clamp

123552119
JN0206-40: RNCC: 3 | RNVC: 2

23 Oct 2001

5340-12-159-3091
Nonmetallic Bumper

121593091
100330-2500.26: RNCC: 2 | RNVC: 2
100330-2500.26: RNCC: 3 | RNVC: 2
100330-2500.26: RNCC: 3 | RNVC: 2
100330-2500.26: RNCC: 5 | RNVC: 9
100330-2500-26: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-7649
Mending Plate

123187649
704-126230-903-3: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-12-172-7542
Nonmetallic Bumper

121727542
23290-181227.003: RNCC: 2 | RNVC: 2
23290-181227.003: RNCC: 3 | RNVC: 2
23290-181227-003: RNCC: 5 | RNVC: 2
23290-181227-003: RNCC: 5 | RNVC: 9
23290-181227.003: RNCC: 5 | RNVC: 9

20 Feb 1978

5340-12-182-3246
Access Door Hinge

121823246
2300033-233200: RNCC: 2 | RNVC: 2
2300033-233200: RNCC: 5 | RNVC: 9
FTW302-02-03-14B: RNCC: 5 | RNVC: 9

25 Jan 1980

5340-12-353-9922
Section Block Clamp

123539922
AFG072204-01: RNCC: 3 | RNVC: 2

28 May 2001

5340-12-189-4769
Hand Crank Arm

121894769
24635.45004: RNCC: 3 | RNVC: 2
24635-45004: RNCC: 5 | RNVC: 2

29 Sep 1981

5340-12-700-8582
Threaded End Tensioning Tie Rod

127008582
VG95211-ML-127008582: RNCC: 2 | RNVC: 2
155N1220-22-1,5-1264: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-372-2129
Loop Clamp

123722129
DIN3015-ZA 4 R-28-28-PP-W1: RNCC: 2 | RNVC: 2
RBPR-428: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-12-149-9037
Resilient Mount

121499037
89000301: RNCC: 3 | RNVC: 2
410-101-B-00.00 TEIL 3: RNCC: 3 | RNVC: 2
410-101B0000-3: RNCC: 5 | RNVC: 2
410-101-B-00.00 TEIL 3: RNCC: 5 | RNVC: 2
410-101-B-00.00-3: RNCC: 5 | RNVC: 2
410-101-B-00.00-3: RNCC: 5 | RNVC: 2
410-101B00-00-3: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-164-4374
Spring Tension Clip

121644374
5077 326 011: RNCC: 3 | RNVC: 2
13817400071: RNCC: 5 | RNVC: 2
23176-100040-06-0: RNCC: 5 | RNVC: 9
23176-100040.06.0: RNCC: 5 | RNVC: 9
5077326011: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-388-5628
Angle Bracket

123885628
122W166100.010.0: RNCC: 2 | RNVC: 2
122W166100.010.0: RNCC: 3 | RNVC: 2

30 Mar 2012

5340-12-182-0540
Electrical-Mechanical Equipment Post

121820540
D123007-0-4: RNCC: 3 | RNVC: 2
128303: RNCC: 5 | RNVC: 2

9 Jan 1980

5340-12-168-5778
Angle Bracket

121685778
WW422065A: RNCC: 3 | RNVC: 2
WW422065A: RNCC: 5 | RNVC: 2
WW 422 065 A: RNCC: 5 | RNVC: 2
WW422065A: RNCC: 5 | RNVC: 2

23 Mar 1977

5340-12-340-3054
Resilient Mount

123403054
2300298-972230.002.0: RNCC: 2 | RNVC: 2
2300298-972230.002.0: RNCC: 3 | RNVC: 2

22 Mar 1996

5340-12-365-2625
Rigid Caster

123652625
PK BB 6/250/50K: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-306-0799
Mending Plate

123060799
P-243852-009: RNCC: 3 | RNVC: 2
P243852-009: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-194-7778
Double Angle Bracket

121947778
A-616782-001: RNCC: 3 | RNVC: 2
A616782-001: RNCC: 5 | RNVC: 2

7 Dec 1982

5340-12-194-5043
Resilient Mount

121945043
5800577-12.002: RNCC: 3 | RNVC: 2
5800577-12.2: RNCC: 5 | RNVC: 2
5800577-12-002: RNCC: 5 | RNVC: 2
C42326-A28-C141: RNCC: 5 | RNVC: 2

10 Nov 1982

5340-12-331-2828
Handwheel

123312828
GN6336.1-63-M10-E-NI: RNCC: 3 | RNVC: 2
GN6336.1-NI-63-M10E: RNCC: 5 | RNVC: 2

15 Apr 1993

5340-12-332-4871
Webbing Strap

123324871
01802-2-SCHLAUFE-FE450-LE400: RNCC: 3 | RNVC: 2
79036/SCHLAUFE-850-450: RNCC: 5 | RNVC: 2
01802-2-FE=450-LE=400: RNCC: 5 | RNVC: 2
01802-2-SCHLAUFE-FE450-LE400MM: RNCC: 5 | RNVC: 2
01802-2-FE450-LE400MM: RNCC: 5 | RNVC: 2
01802-2-FE450MM-LE400MM: RNCC: 5 | RNVC: 2
DIN60060-2-25X450X400-C1/SCHLAUF: RNCC: 5 | RNVC: 9

16 Aug 1993

5340-12-148-5713
Catch Strike

121485713
C42165-A89-C2: RNCC: 3 | RNVC: 2
RELGH373T46: RNCC: 5 | RNVC: 2
651381: RNCC: 5 | RNVC: 2
AW7018-460-02: RNCC: 5 | RNVC: 2
C40165A373C46: RNCC: 5 | RNVC: 2
AW.7018.460.02-A001: RNCC: 5 | RNVC: 2
C40165-A373-C46: RNCC: 5 | RNVC: 2
5800587-510.2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-9882
Angle Bracket

121969882
A-230129-215: RNCC: 3 | RNVC: 2
A230129-215: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-334-7931
Ball Socket Seat

123347931
KS 4823 00: RNCC: 3 | RNVC: 2
81.95301-0066: RNCC: 5 | RNVC: 2
81953010066: RNCC: 5 | RNVC: 2

21 Jun 1994

5340-12-321-1789
Spring Loaded Cylinder Fastener

123211789
2500067-101321.00: RNCC: 2 | RNVC: 2
2500067-101321.00: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-12-177-5124
Manual Control Handle

121775124
2300002-181171.000: RNCC: 2 | RNVC: 2
2300002-181171.000: RNCC: 3 | RNVC: 2
9830743: RNCC: 5 | RNVC: 2
2300002-181171: RNCC: 5 | RNVC: 2
2300002-181171: RNCC: 5 | RNVC: 9
2300002-181171: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-381-9085
Dust And Moisture Seal Protective Cap

123819085
800/1/1/16-12UN: RNCC: 3 | RNVC: 2

16 Apr 2010

5340-12-177-2317
Angle Bracket

121772317
5800822-091-003: RNCC: 3 | RNVC: 2
5800822-091.003: RNCC: 5 | RNVC: 2

22 Jan 1979

5340-12-391-0566
Rod End Clevis

123910566
DIN71752-G6X12-1.4541: RNCC: 2 | RNVC: 2

18 Jan 2013

5340-12-195-6960
Catch Strike

121956960
5800043-1031.00: RNCC: 2 | RNVC: 2
5800043-1031.00: RNCC: 3 | RNVC: 2
5800043-1031: RNCC: 5 | RNVC: 2
5800043-1031: RNCC: 5 | RNVC: 9

30 Mar 1983

5340-12-702-3831
Mounting Bracket

127023831
VG95211-ML-127023831: RNCC: 2 | RNVC: 2
5.12.5101.8100.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-311-8349
Catch Strike

123118349
B61.7.1/72: RNCC: 3 | RNVC: 2
B61-7-1-7-2: RNCC: 5 | RNVC: 2

21 Oct 1987

5340-12-314-5633
Threaded Rod End

123145633
TL2009-02: RNCC: 3 | RNVC: 2
91608633: RNCC: 5 | RNVC: 2

19 Jul 1988

5340-12-306-6606
Mending Plate

123066606
704-152000-901-0: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-12-389-4843
Handwheel

123894843
05-21-000-10-01B: RNCC: 3 | RNVC: 2
05-21-000-10-01/B: RNCC: 5 | RNVC: 9

12 Jul 2012

5340-12-306-7296
Nonmetallic Bumper

123067296
39-2047-100000.03.0: RNCC: 2 | RNVC: 2
WW 492 018: RNCC: 2 | RNVC: 2
39-2047-100000.03.0: RNCC: 3 | RNVC: 2
WW 492 018: RNCC: 5 | RNVC: 9

25 Mar 1986

5340-12-701-1860
Mounting Plate

127011860
VG95211-ML-127011860: RNCC: 2 | RNVC: 2
5.12.0420.1012.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-181-2292
Mounting Bracket

121812292
5900046-1340: RNCC: 2 | RNVC: 2
21-1340: RNCC: 3 | RNVC: 2
21-1340: RNCC: 5 | RNVC: 9
5900046-1340: RNCC: 5 | RNVC: 9

5 Nov 1979

5340-12-325-0791
Electrical-Mechanical Equipment Post

123250791
VG95148B5XM2,5X19,2-NRST: RNCC: 2 | RNVC: 2
VG95148B5XM2,5X19,2-NRST: RNCC: 3 | RNVC: 2
66.3578.410.04-A001: RNCC: 3 | RNVC: 2
67.3521.000.44-A053: RNCC: 5 | RNVC: 2

30 Apr 1991

5340-12-362-3086
Plain Solid Disk

123623086
49594-003: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-12-318-3079
Retaining Strap

123183079
287-809-175-010: RNCC: 3 | RNVC: 2
28.07.809-175.01: RNCC: 5 | RNVC: 2

29 Jun 1989

5340-12-151-9002
Webbing Strap

121519002
113-05-01: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-320-9200
Mounting Plate

123209200
H3220-C1X6: RNCC: 3 | RNVC: 2
R2: RNCC: 3 | RNVC: 2
R086: RNCC: 5 | RNVC: 2
H3220-C1X6: RNCC: 5 | RNVC: 2
0116 3550: RNCC: 5 | RNVC: 2
C1X6H3220: RNCC: 5 | RNVC: 2

6 Mar 1990

5340-12-307-6596
Nonmetallic Bumper

123076596
81220-741840.NR60.ST: RNCC: 3 | RNVC: 2
741840: RNCC: 3 | RNVC: 2
741840.NR60.ST: RNCC: 5 | RNVC: 2

14 Jul 1986

5340-12-315-3887
Access Cover

123153887
NO PRIMARY REF 12-315-3887: RNCC: 3 | RNVC: 2
5516 154579: RNCC: 5 | RNVC: 9

19 Oct 1988

5340-12-195-3787
Electronic Equipment Hardware Kit

121953787
5803462-490: RNCC: 2 | RNVC: 2
5803462-490: RNCC: 3 | RNVC: 2
5803462-490: RNCC: 3 | RNVC: 2
5801537-190: RNCC: 5 | RNVC: 9
5801537-190: RNCC: 5 | RNVC: 9
5801537-190: RNCC: 5 | RNVC: 9
5803462-490: RNCC: 5 | RNVC: 9

17 Feb 1983

5340-12-309-1873
Access Cover

123091873
1200616: RNCC: 3 | RNVC: 2
305 204-01: RNCC: 5 | RNVC: 2
0289653652: RNCC: 5 | RNVC: 2
305216-01: RNCC: 5 | RNVC: 2

19 Dec 1986

5340-12-302-8318
Angle Bracket

123028318
4900123-2100.04: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-393-6868
Access Cover

123936868
11.29251-0012: RNCC: 3 | RNVC: 2
11.29251-0012: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-12-306-6363
Bow Handle

123066363
704-144100-905-0: RNCC: 3 | RNVC: 2
704-144100-905-0: RNCC: 5 | RNVC: 9

17 Mar 1986

5340-12-043-2714

5340-12-377-3950
Surface Bolt

123773950
8605001.3.550.16: RNCC: 3 | RNVC: 2
8605001355016: RNCC: 5 | RNVC: 2

14 Jan 2009

5340-12-325-6243
Angle Bracket

123256243
5801984-981110.002.0: RNCC: 2 | RNVC: 2
5801984-981110.002.0: RNCC: 3 | RNVC: 2

24 Jun 1991

5340-12-148-3715
Resilient Mount

121483715
80706501: RNCC: 3 | RNVC: 2
410-314-B-00.01: RNCC: 3 | RNVC: 2
410-314B0001: RNCC: 5 | RNVC: 2
410-314-B-00.01: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-192-8134
Nut And Bolt Locking Plate

121928134
103-220-0015-000: RNCC: 3 | RNVC: 2
1094 401-100.03: RNCC: 5 | RNVC: 2
351-002-622100-003-0: RNCC: 5 | RNVC: 9

26 May 1982

5340-12-372-1961
Mounting Bracket

123721961
2 0000-041: RNCC: 3 | RNVC: 2
2 0000-041: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-12-392-7002
Spring Loaded Cylinder Fastener

123927002
2300501-208420.000.0: RNCC: 3 | RNVC: 2

28 Jun 2013

5340-12-702-4897
Mounting Bracket

127024897
VG95211-ML-127024897: RNCC: 2 | RNVC: 2
5.51.5101.0360.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-358-1347
Detent Plunger

123581347
4055R-310400.066.0: RNCC: 2 | RNVC: 2
4055R-310400.066.0: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-12-370-7356
Mounting Bracket

123707356
153 7055-001: RNCC: 3 | RNVC: 2
153 7055-001: RNCC: 5 | RNVC: 2

14 Dec 2006

5340-12-196-5999
Angle Bracket

121965999
23305-020000.01.0: RNCC: 2 | RNVC: 2
23305-020000.01.0: RNCC: 3 | RNVC: 2
23305-020000-01-0: RNCC: 5 | RNVC: 2
23305-020000-01-0: RNCC: 5 | RNVC: 9

21 Jul 1983

5340-12-386-2010
Access Cover

123862010
2500262-067000.006.0: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-374-8385
Mounting Plate

123748385
SK976-182200.011.0: RNCC: 3 | RNVC: 2
7091197: RNCC: 5 | RNVC: 2
1306307: RNCC: 5 | RNVC: 9

31 Mar 2008

5340-12-196-3026
Electronic Equipment Hardware Kit

121963026
5801999-250000.00: RNCC: 2 | RNVC: 2
5801999-250000.00: RNCC: 3 | RNVC: 2
5801999-250000.00: RNCC: 3 | RNVC: 2
5801999-250000.00: RNCC: 5 | RNVC: 9

27 Jun 1983

5340-12-323-9074
Mounting Plate

123239074
1121-21721.100.125: RNCC: 3 | RNVC: 2
1121-21721-100.125: RNCC: 5 | RNVC: 2

8 Jan 1991

5340-12-700-6550
Pawl Fastener

127006550
VG95211-ML-127006550: RNCC: 2 | RNVC: 2
196.000: RNCC: 3 | RNVC: 2
0501400096389: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-346-2440
Double Angle Bracket

123462440
065-015000.01: RNCC: 3 | RNVC: 2

2 Jul 1998

5340-12-392-6423
Extension Drawer Slide

123926423
20110-095: RNCC: 3 | RNVC: 2

26 Jun 2013

5340-12-168-4895
Helical Compression Spring Retainer

121684895
0026-5724-110: RNCC: 3 | RNVC: 2
0026-5724-110: RNCC: 5 | RNVC: 9

15 Mar 1977

5340-12-350-4460
Section Block Clamp

123504460
J29120358-003: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-330-7861
Extension Drawer Slide Section

123307861
AZ4021G011: RNCC: 3 | RNVC: 2
AZ4021G011: RNCC: 5 | RNVC: 9

9 Feb 1993

5340-12-371-8153
Retaining Bail

123718153
1612386004: RNCC: 3 | RNVC: 2

21 May 2007

5340-12-363-0510
Angle Bracket

123630510
82657400016: RNCC: 3 | RNVC: 2
82.65740.0016: RNCC: 5 | RNVC: 2

29 Apr 2004

5340-12-363-0507
Angle Bracket

123630507
81657400066: RNCC: 3 | RNVC: 2
81.65740.0066: RNCC: 5 | RNVC: 2

29 Apr 2004

5340-12-335-6267
Hand Crank

123356267
003.049.00: RNCC: 3 | RNVC: 2
00304900: RNCC: 5 | RNVC: 2
00304900.113: RNCC: 5 | RNVC: 2

7 Sep 1994

5340-12-198-8352
Retaining Strap

121988352
43711556-601: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-12-351-5234
Dust And Moisture Seal Protective Plug

123515234
700M16 RAL9005: RNCC: 3 | RNVC: 2
GPN700M16 SCHWARZ: RNCC: 5 | RNVC: 2

1 Aug 2000

5340-12-375-1403
Butt Hinge Leaf

123751403
L792M3012207: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-350-2773
Dust And Moisture Seal Boot

123502773
81461320046: RNCC: 3 | RNVC: 2

10 Mar 2000

5340-12-198-4834
Bridge Clamp

121984834
5802017-603000.13: RNCC: 3 | RNVC: 2

1 Feb 1984

5340-12-199-7238
Loop Clamp

121997238
635E02016: RNCC: 3 | RNVC: 2

25 May 1984

5340-12-194-2546
Pipe Covering Protection Saddle

121942546
281253325: RNCC: 3 | RNVC: 2

18 Oct 1982

5340-12-347-0742
Runner

123470742
24467: RNCC: 3 | RNVC: 2
P24467: RNCC: 5 | RNVC: 9

22 Oct 1998

5340-12-314-5176
Extension Handle

123145176
GLZ 4798 014: RNCC: 3 | RNVC: 2

15 Jul 1988

5340-12-350-0121
Dust And Moisture Seal Protective Cap

123500121
43644: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-372-4790
Dust And Moisture Seal Protective Cap

123724790
013264: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-12-392-0351
Retaining Strap

123920351
0019958002: RNCC: 3 | RNVC: 2

26 Apr 2013

5340-12-186-6475
Cremone Bolt

121866475
6000012: RNCC: 3 | RNVC: 2

23 Jan 1981

5340-12-310-9381
Angle Bracket

123109381
2300227-348000.002: RNCC: 2 | RNVC: 2
2300227-348000.002: RNCC: 3 | RNVC: 2
2300227-348000.002: RNCC: 5 | RNVC: 9

10 Jul 1987

5340-12-388-0116
Mounting Bracket

123880116
5841802240: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-380-0175
Loop Clamp

123800175
DIN3016-1-D1-94X25-W1-2-NBR: RNCC: 2 | RNVC: 2

18 Sep 2009

5340-12-303-8735
Metal Runner

123038735
4-141-0003: RNCC: 3 | RNVC: 2

10 May 1985

5340-12-338-7989
Helical Compression Spring Seat

123387989
2300348-183240.004.0: RNCC: 2 | RNVC: 2
2300348-183240.004.0: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-362-3830
Mounting Plate

123623830
2500261-186420.000.0: RNCC: 2 | RNVC: 2
2500261-186420.000.0: RNCC: 3 | RNVC: 2

16 Feb 2004

5340-12-194-7049
Webbing Strap

121947049
82300-5800251-40005AUSF A: RNCC: 3 | RNVC: 2
5800251-40005AUSFA: RNCC: 3 | RNVC: 2
5800251-40005 A: RNCC: 5 | RNVC: 2

30 Nov 1982

5340-12-343-4170
Rod End Clevis

123434170
E11906-9: RNCC: 3 | RNVC: 2
E11906-9: RNCC: 5 | RNVC: 2
F300 0T 023 0369: RNCC: 6 | RNVC: 9

17 Jun 1997

5340-12-318-1259
Detent Plunger

123181259
1000192-01 2 30000.20: RNCC: 2 | RNVC: 2
1000192-01 2 30000.20: RNCC: 3 | RNVC: 2
1000192-01 2 30000.20: RNCC: 5 | RNVC: 9

14 Jun 1989

5340-12-702-5406
Mounting Bracket

127025406
VG95211-ML-127025406: RNCC: 2 | RNVC: 2
5.51.7205.0070.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-198-7576
Shock Mount Pad

121987576
1000042-133100.05: RNCC: 3 | RNVC: 2
1000042-133100-05: RNCC: 5 | RNVC: 2
1000042-133100.05: RNCC: 5 | RNVC: 9

23 Feb 1984

5340-12-178-8482
Catch Strike

121788482
DIN3133-G15X17ZN8: RNCC: 2 | RNVC: 2
DIN3133-G15X17-ZN8: RNCC: 5 | RNVC: 2
K12DIN3134GALZN9: RNCC: 5 | RNVC: 2
AK12DIN3134GALZN9: RNCC: 5 | RNVC: 2
DIN3134K55ZN: RNCC: 5 | RNVC: 2

18 May 1979

5340-12-701-7251
Angle Bracket

127017251
VG95211-ML-127017251: RNCC: 2 | RNVC: 2
5.12.7602.0290.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-365-8412
Butt Hinge

123658412
DIN7956-25X0,7-30-ST-BK-U-360: RNCC: 2 | RNVC: 2

11 Feb 2005

5340-12-314-2331
Loop Clamp

123142331
DIN71555-90,5 LACK BIS 500GRAD C: RNCC: 2 | RNVC: 2
071555090502: RNCC: 3 | RNVC: 2
N 071555 090502: RNCC: 5 | RNVC: 9

17 Jun 1988

5340-12-369-0402
Sliding Block

123690402
2500238-050316.000.0: RNCC: 2 | RNVC: 2
2500238-050316.000.0: RNCC: 3 | RNVC: 2

16 May 2006

5340-12-363-0674
Dust And Moisture Seal Protective Plug

123630674
RA160-05286-01: RNCC: 3 | RNVC: 2
RA160-05286.01: RNCC: 5 | RNVC: 2

30 Apr 2004

5340-12-320-1014
Access Cover

123201014
C145-A11-C32: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-178-9067
Helical Compression Spring Seat

121789067
C106-A44-C71: RNCC: 2 | RNVC: 2
C106A44C71: RNCC: 3 | RNVC: 2
C106-A44-C71: RNCC: 5 | RNVC: 2
C106A44C71: RNCC: 5 | RNVC: 2
C106-A44-C71: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-312-9343
Dust And Moisture Seal Protective Cap-Plug

123129343
42466/0110-02: RNCC: 3 | RNVC: 2
42466011002: RNCC: 5 | RNVC: 2

19 Feb 1988

5340-12-308-1094
Electrical-Mechanical Equipment Post

123081094
VG95148B5,5XM3X19-NRST: RNCC: 2 | RNVC: 2
VG95148B5,5XM3X19-NRST: RNCC: 3 | RNVC: 2
C79451-A3085-C115: RNCC: 3 | RNVC: 2

3 Sep 1986

5340-12-312-5076
Access Cover

123125076
P-086475-005: RNCC: 3 | RNVC: 2
P086475-005: RNCC: 5 | RNVC: 2

13 Jan 1988

5340-12-169-1388
Leather Strap

121691388
NO PRIMARY REF 12-169-1388: RNCC: 3 | RNVC: 2
96502004: RNCC: 5 | RNVC: 9

18 Apr 1977

5340-12-354-4906
Loop Clamp

123544906
9019A1005-01: RNCC: 3 | RNVC: 2

19 Jul 2001

5340-12-199-4208
Pipe Bracket

121994208
2300088-310622.00: RNCC: 2 | RNVC: 2
2300088-310622-00: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-363-6749
Retaining Strap

123636749
J28230204-401: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-12-155-5531
Retaining Strap

121555531
160-71190-03: RNCC: 3 | RNVC: 2
160-71190-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-360-8655
Mounting Plate

123608655
2300007-181011.002.5: RNCC: 3 | RNVC: 2

17 Jul 2003

5340-12-197-7665
Mending Plate

121977665
A-145401-060: RNCC: 3 | RNVC: 2
A145401-060: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-317-4189
Angle Bracket

123174189
P-145502-032: RNCC: 3 | RNVC: 2
P145502-032: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-701-6594
Angle Bracket

127016594
VG95211-ML-127016594: RNCC: 2 | RNVC: 2
5.12.7210.0380.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-350-3311
Double Angle Bracket

123503311
160-77738-01: RNCC: 3 | RNVC: 2

16 Mar 2000

5340-12-388-7680
Angle Bracket

123887680
601243-201300.02: RNCC: 2 | RNVC: 2
601243-201300.02: RNCC: 3 | RNVC: 2

20 Apr 2012

5340-12-334-2306
Lock-Release Lever

123342306
04310-10: RNCC: 3 | RNVC: 2
NLM4310-10: RNCC: 5 | RNVC: 9
431-10: RNCC: 5 | RNVC: 9
NLM431-10: RNCC: 5 | RNVC: 9

18 Apr 1994

5340-12-351-2538
Metallic Bumper

123512538
3060-00-311100.18: RNCC: 3 | RNVC: 2

6 Jul 2000

5340-12-162-7402
Nonmetallic Bumper

121627402
14021-17001-02: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-195-2120
Double Angle Bracket

121952120
4564986: RNCC: 3 | RNVC: 2
456.4986: RNCC: 5 | RNVC: 2
5801443-130100-003: RNCC: 5 | RNVC: 9

26 Jan 1983

5340-12-357-0173
Access Cover

123570173
3011-11-27: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-312-9075
Mounting Bracket

123129075
586-9300-000: RNCC: 3 | RNVC: 2

18 Feb 1988

5340-12-187-9078
Access Cover

121879078
2300109-186225.000.0: RNCC: 2 | RNVC: 2
2300109-186225.000.0: RNCC: 3 | RNVC: 2
2300109-186225.000.0: RNCC: 3 | RNVC: 2
2300109-186225-000-0: RNCC: 5 | RNVC: 2
2300109-186225-000-0: RNCC: 5 | RNVC: 2
2300109-186225-000-0: RNCC: 5 | RNVC: 9
2300109-186225.000.0: RNCC: 5 | RNVC: 9

19 May 1981

5340-12-344-6029
Detent Plunger

123446029
7100129-7100-02: RNCC: 2 | RNVC: 2
10129-7100-02: RNCC: 3 | RNVC: 2

13 Nov 1997

5340-12-180-1519
Line Supporting Strap

121801519
8HL707877-02: RNCC: 3 | RNVC: 9
8HL707877-022: RNCC: 5 | RNVC: 9

22 Aug 1979

5340-12-701-6229
Mounting Plate

127016229
VG95211-ML-127016229: RNCC: 2 | RNVC: 2
5.12.7030.1260.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-307-0876
Nonmetallic Bumper

123070876
12899-10: RNCC: 3 | RNVC: 2

7 May 1986

5340-12-166-9570
Mending Plate

121669570
66-3524-500-04A002: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-12-367-1927
Access Cover

123671927
RD99-00-021000.03: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-12-385-6885
Caster Wheel

123856885
GTHN 160/25H7: RNCC: 3 | RNVC: 2

30 Jun 2011

5340-12-171-1225
Butt Hinge

121711225
81972016020: RNCC: 3 | RNVC: 2
9304: RNCC: 5 | RNVC: 2
81.97201-6020: RNCC: 5 | RNVC: 2

9 Sep 1977

5340-12-312-3000
Resilient Mount

123123000
279.900 635: RNCC: 3 | RNVC: 2
1392253-100018: RNCC: 3 | RNVC: 2
279.900635: RNCC: 5 | RNVC: 9
279.900 635: RNCC: 5 | RNVC: 9
1392253-100018: RNCC: 5 | RNVC: 9
279.900 635: RNCC: 5 | RNVC: 9
1392253-100018: RNCC: 5 | RNVC: 9

11 Dec 1987

5340-12-181-1757
Rod End Clevis

121811757
DIN71752-G6X24-A3C: RNCC: 2 | RNVC: 2
X6X24DIN71752: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-12-349-7672
Mounting Plate

123497672
FAST-202600.01: RNCC: 2 | RNVC: 2
FAST-202600.01: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-12-334-3682
Mounting Bracket

123343682
1675726100: RNCC: 3 | RNVC: 2
16757261: RNCC: 5 | RNVC: 2

2 May 1994

5340-12-372-0651
Mounting Bracket

123720651
2759193: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-12-135-6503

5340-12-389-2012
Helical Compression Spring Seat

123892012
3008: RNCC: 3 | RNVC: 2

5 Jun 2012

5340-12-198-6277
Flush Lock

121986277
253843604: RNCC: 3 | RNVC: 9

14 Feb 1984

5340-12-348-0222
Lock-Release Lever

123480222
7358 011 110: RNCC: 3 | RNVC: 2
7358011110: RNCC: 5 | RNVC: 9

29 Mar 1999

5340-12-159-8050
Nut And Bolt Locking Plate

121598050
1240 301 006: RNCC: 3 | RNVC: 2
1240301006: RNCC: 5 | RNVC: 2
1240301006: RNCC: 5 | RNVC: 9
100CP0477: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-158-5340
Nonmetallic Bumper

121585340
4700053: RNCC: 3 | RNVC: 2
39019: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-375-9290
Angle Bracket

123759290
X58420200001: RNCC: 3 | RNVC: 2

22 Jul 2008

5340-12-393-5491
Bumper

123935491
8426010: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-12-317-8376
Helical Compression Spring Retainer

123178376
3316001: RNCC: 3 | RNVC: 2

18 May 1989

5340-12-183-9661
Vent Plug

121839661
111701309: RNCC: 3 | RNVC: 2

7 Jun 1980

5340-12-342-1922
Angle Bracket

123421922
347-150-037: RNCC: 3 | RNVC: 2

28 Dec 1996

5340-12-359-3604
Mounting Bracket

123593604
SK688-131020.000.0: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-177-9569
Nonmetallic Bumper

121779569
1-2500-100: RNCC: 3 | RNVC: 2
81418400020: RNCC: 5 | RNVC: 2
81.41840-0020: RNCC: 5 | RNVC: 2

9 Mar 1979

5340-12-358-2053
Mounting Bracket

123582053
2500261-068130.004.0: RNCC: 2 | RNVC: 2
2500261-068130.004.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-702-4011
Mounting Bracket

127024011
VG95211-ML-127024011: RNCC: 2 | RNVC: 2
5.12.5811.1220.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-316-7510
Mounting Bracket

123167510
1000192-02 0 40000.07: RNCC: 2 | RNVC: 2
1000192-02 0 40000.07: RNCC: 3 | RNVC: 2
1000192-02 0 40000.07: RNCC: 5 | RNVC: 9

8 Feb 1989

5340-12-300-5075
Metal Runner

123005075
5801998-340000.01: RNCC: 2 | RNVC: 2
5801998-340000.01: RNCC: 3 | RNVC: 2

8 Aug 1984

5340-12-389-2675
Butt Hinge

123892675
9999260-180100.005.0: RNCC: 3 | RNVC: 2

14 Jun 2012

5340-12-386-1039
Block Clamp

123861039
1030105-010230.000.0: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-12-365-2520
Door Hook

123652520
2500278-191841.000.0: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-12-359-4349
Loop Clamp

123594349
DIN3016-1-D1-14X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-176-1305
Mounting Bracket

121761305
CF 418 061 B: RNCC: 3 | RNVC: 2
536056-0233.000: RNCC: 3 | RNVC: 2
CF 418 061 B: RNCC: 5 | RNVC: 2
CF418061A: RNCC: 5 | RNVC: 2
CF 418 061 B: RNCC: 5 | RNVC: 2
CF418061A: RNCC: 5 | RNVC: 2
CF418061B: RNCC: 5 | RNVC: 2
CF418061A: RNCC: 5 | RNVC: 2
CF418061B: RNCC: 5 | RNVC: 2
CF418061B: RNCC: 5 | RNVC: 2

9 Nov 1978

5340-12-171-5800
Mending Plate

121715800
81974860183: RNCC: 3 | RNVC: 2
81.97486-0183: RNCC: 5 | RNVC: 2
23230-012605.001.0: RNCC: 5 | RNVC: 9
23230-012605-001-0: RNCC: 5 | RNVC: 9

26 Oct 1977

5340-12-378-3889
Clamping Catch

123783889
TL-50-201-5: RNCC: 3 | RNVC: 2
TL600-A-1: RNCC: 5 | RNVC: 9

1 Apr 2009

5340-12-700-5064
Flush Lock

127005064
VG95211-ML-127005064: RNCC: 2 | RNVC: 2
5.12.0100.8040.00: RNCC: 3 | RNVC: 2
0501400115789: RNCC: 5 | RNVC: 2

19 Sep 1992

5340-12-324-4043
Metal Runner

123244043
7068-84000-001-2: RNCC: 3 | RNVC: 2

13 Feb 1991

5340-12-335-3872
Access Cover

123353872
347-110-009: RNCC: 2 | RNVC: 2
347-110-009: RNCC: 3 | RNVC: 2

16 Aug 1994

5340-12-307-9609
Loop Clamp

123079609
LM-6445LIG22: RNCC: 3 | RNVC: 2
LM-6445: RNCC: 5 | RNVC: 9

14 Aug 1986

5340-12-185-8583
Rigid Caster

121858583
Z02-12G1-000-Z-M70-00: RNCC: 3 | RNVC: 2
B-STARU125,PL120X80 GLEITLAGER: RNCC: 5 | RNVC: 2
BSTARU125: RNCC: 5 | RNVC: 2

4 Nov 1980

5340-12-701-3636
Mounting Plate

127013636
VG95211-ML-127013636: RNCC: 2 | RNVC: 2
5.12.5301.1002.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-190-3085
Metal Runner

121903085
5801544-0120.003: RNCC: 3 | RNVC: 2
5801544-0120-003: RNCC: 5 | RNVC: 9

19 Nov 1981

5340-12-305-5177
Mending Plate

123055177
2300124-180000.004.0: RNCC: 2 | RNVC: 2
2300124-180000.004.0: RNCC: 3 | RNVC: 2
2300124-180000.004.0: RNCC: 3 | RNVC: 2
2300124-180000.004.0: RNCC: 5 | RNVC: 9

18 Nov 1985

5340-12-186-5074
Mounting Plate

121865074
55-0206-005-07: RNCC: 3 | RNVC: 2

12 Jan 1981

5340-12-362-2730
Angle Bracket

123622730
J21220128-006: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-198-2430
Mending Plate

121982430
66.3851.521.01-A001: RNCC: 3 | RNVC: 2
161780: RNCC: 5 | RNVC: 2

5 Jan 1984

5340-12-360-9328
Rod End Clevis

123609328
12358901: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-391-5983
Eye Hook

123915983
5584093: RNCC: 3 | RNVC: 2
000104: RNCC: 5 | RNVC: 2

21 Mar 2013

5340-12-320-4235
Handle Grip

123204235
130473771: RNCC: 3 | RNVC: 2
3666 0473 771: RNCC: 5 | RNVC: 2

12 Jan 1990

5340-12-364-3407
Dust And Moisture Seal Protective Cover

123643407
4258350009: RNCC: 3 | RNVC: 2

11 Sep 2004

5340-12-308-2758
Pipe Bracket

123082758
2800017-521: RNCC: 2 | RNVC: 2
25300182: RNCC: 3 | RNVC: 2

23 Sep 1986

5340-12-329-3095
Mounting Plate

123293095
160-31220-62: RNCC: 3 | RNVC: 2
160-31220-62: RNCC: 5 | RNVC: 9

4 Aug 1992

5340-12-339-8849
Handle Grip

123398849
4301619912: RNCC: 3 | RNVC: 2

29 Jan 1996

5340-12-333-1587

5340-12-382-1252
Loop Clamp

123821252
360103027H: RNCC: 3 | RNVC: 2

11 May 2010

5340-12-389-0569
Mounting Bracket

123890569
Z=10081: RNCC: 3 | RNVC: 2

23 May 2012

5340-12-307-2458
Mending Plate

123072458
RP988665: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-197-8163
Butt Hinge

121978163
N00A2205003008A: RNCC: 3 | RNVC: 2
N00A2205003008A: RNCC: 5 | RNVC: 9

24 Nov 1983

5340-12-194-7902
Angle Bracket

121947902
VL0882940: RNCC: 3 | RNVC: 2
088.2940: RNCC: 5 | RNVC: 2

8 Dec 1982

5340-12-390-3230
Nut And Bolt Locking Plate

123903230
EN29S1030: RNCC: 3 | RNVC: 2

30 Oct 2012

5340-12-352-2779
Access Cover

123522779
11443201: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-12-196-4449
Pad Eye

121964449
17H923: RNCC: 3 | RNVC: 2
5.69.451VZS: RNCC: 5 | RNVC: 2

7 Jul 1983

5340-12-322-0136
Mounting Plate

123220136
027032509: RNCC: 3 | RNVC: 2

17 Jul 1990

5340-12-373-3262
Helical Compression Spring Seat

123733262
L671M5030206: RNCC: 3 | RNVC: 2

23 Oct 2007

5340-12-301-6378
Angle Bracket

123016378
43712230-601: RNCC: 2 | RNVC: 2
43712230-601: RNCC: 3 | RNVC: 2
43712230-601: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-305-5671
Mending Plate

123055671
4404290940: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-372-0684
Double Angle Bracket

123720684
8406748: RNCC: 3 | RNVC: 2

15 Jun 2007

5340-12-336-2658
Access Cover

123362658
4620 330 006: RNCC: 3 | RNVC: 2
4620330006: RNCC: 5 | RNVC: 9

4 Nov 1994

5340-12-040-1261

5340-12-360-0353
Clamping Catch

123600353
E2.03.00.30/6: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-367-2247
Mechanic Equipment Hardware Kit

123672247
P/N 93010: RNCC: 3 | RNVC: 9

21 Jul 2005

5340-12-347-0250
Track Stop

123470250
CF 359 261 A: RNCC: 2 | RNVC: 2
CF 359 261 A: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-12-322-9355
Metal Runner

123229355
702-133210-901-0: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-12-194-4084
Nonmetallic Bumper

121944084
A-616830-009: RNCC: 3 | RNVC: 2
A616830-009: RNCC: 5 | RNVC: 2

3 Nov 1982

5340-12-701-6315
Pawl Fastener

127016315
VG95211-ML-127016315: RNCC: 2 | RNVC: 2
5.12.7050.8020.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-194-7050
Webbing Strap

121947050
82300-5800251-40005AUSF B: RNCC: 3 | RNVC: 2
5800251-40005AUSFB: RNCC: 3 | RNVC: 2
5800251-40005 B: RNCC: 5 | RNVC: 2

30 Nov 1982

5340-12-190-3221
Nonmetallic Bumper

121903221
DIN95364-A25X14-M6X15-NR45ST: RNCC: 2 | RNVC: 2
Q521070003: RNCC: 5 | RNVC: 2
Q 5 2107 0003: RNCC: 5 | RNVC: 2
Q521070003: RNCC: 5 | RNVC: 2
530000-25X14-M6X15.NR45.ST: RNCC: 5 | RNVC: 2
Q 5 2107 0003: RNCC: 5 | RNVC: 2
VG95364-A25X14-M6X15-NR45ST: RNCC: 5 | RNVC: 9

19 Nov 1981

5340-12-365-2538
Retaining Strap

123652538
2500255-193510.005.0: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-12-356-9637
Metal Grille

123569637
2500194-193700.000.0: RNCC: 2 | RNVC: 2
2500194-193700.000.0: RNCC: 3 | RNVC: 2

19 Apr 2002

5340-12-196-9539
Double Angle Bracket

121969539
A-295091-403: RNCC: 3 | RNVC: 2
A295091-403: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-197-5788
Cremone Bolt

121975788
6000022: RNCC: 3 | RNVC: 2
7-223-0810: RNCC: 5 | RNVC: 2
6000022RECHTS: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-306-7471
Shelf Bracket

123067471
4900189-251000.00: RNCC: 2 | RNVC: 2
4900189-251000.00: RNCC: 3 | RNVC: 2

26 Mar 1986

5340-12-700-6590
Tubular Fairlead

127006590
VG95211-ML-127006590: RNCC: 2 | RNVC: 2
9W4.468.216: RNCC: 3 | RNVC: 2
0503401221099: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-307-7368
Retaining Strap

123077368
FE97-350-00: RNCC: 3 | RNVC: 2

21 Jul 1986

5340-12-308-7229
Access Cover

123087229
5105744: RNCC: 3 | RNVC: 2
5105744: RNCC: 5 | RNVC: 2
1256-10.063: RNCC: 5 | RNVC: 9

11 Nov 1986

5340-12-318-8752
Nonmetallic Bumper

123188752
65.7058.112.00-A001: RNCC: 3 | RNVC: 2
C42 165-A118-B2 SAG: RNCC: 5 | RNVC: 9

22 Aug 1989

5340-12-302-8880
Double Angle Bracket

123028880
VG95211-ML-123028880: RNCC: 2 | RNVC: 2
6685336237-01: RNCC: 3 | RNVC: 2

5 Feb 1985

5340-12-196-3659
Access Cover

121963659
282501-0134.000: RNCC: 3 | RNVC: 2
282501-0134.000: RNCC: 5 | RNVC: 9

30 Jun 1983

5340-12-324-1886
Mounting Bracket

123241886
5801408-2240.006: RNCC: 2 | RNVC: 2
5801408-2240.006: RNCC: 3 | RNVC: 2

25 Jan 1991

5340-12-198-0942
Mending Plate

121980942
5801411-33012.004: RNCC: 3 | RNVC: 2
5801411-33012.004: RNCC: 5 | RNVC: 9

20 Dec 1983

5340-12-353-4662
Mechanic Equipment Hardware Kit

123534662
TA3014G001: RNCC: 3 | RNVC: 2
1730-00446: RNCC: 6 | RNVC: 9

28 Mar 2001

5340-12-173-0812
Electrical-Mechanical Equipment Post

121730812
5800573-1112-073: RNCC: 3 | RNVC: 2
5800573-1112.073: RNCC: 5 | RNVC: 2
C42326-A20-C100: RNCC: 5 | RNVC: 2
C42326A20C100: RNCC: 5 | RNVC: 2

20 Mar 1978

5340-12-702-2383
Retaining Band

127022383
VG95211-ML-127022383: RNCC: 2 | RNVC: 2
30.7702.100.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-348-9103
Lock-Release Lever

123489103
245/9713-01-12-00: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-393-7731
Mechanical Stop

123937731
584.02-010703-011: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-12-329-5864
Access Cover

123295864
656-064: RNCC: 3 | RNVC: 2
656.064: RNCC: 3 | RNVC: 2

4 Sep 1992

5340-12-370-1500
Clamping Catch

123701500
BP-104-80S: RNCC: 3 | RNVC: 2

26 Sep 2006

5340-12-377-8113
Mounting Plate

123778113
4060741-150140.00: RNCC: 3 | RNVC: 2
1129028: RNCC: 5 | RNVC: 2

12 Feb 2009

5340-12-365-6344
Angle Bracket

123656344
J92228079-003: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-328-3724
Bow Handle

123283724
C42080-A32-C29: RNCC: 2 | RNVC: 2
C42080-A32-C29: RNCC: 3 | RNVC: 2
VG95148A100X22X8XM4-AL-LQRAL7032: RNCC: 5 | RNVC: 2

12 May 1992

5340-12-184-2199
Angle Bracket

121842199
5801357-1100.05: RNCC: 2 | RNVC: 2
5801357-1100.05: RNCC: 3 | RNVC: 2
5801357-1100-05: RNCC: 5 | RNVC: 9
5801357-1100-05: RNCC: 5 | RNVC: 9
5801357-1100-05: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-12-300-0769
Turnbuckle

123000769
160-88412: RNCC: 3 | RNVC: 2
15160-88412: RNCC: 5 | RNVC: 2
7M320: RNCC: 5 | RNVC: 2
160-88412: RNCC: 5 | RNVC: 9

29 Jun 1984

5340-12-195-5338
Mending Plate

121955338
C22234-A1000-C52: RNCC: 3 | RNVC: 2
C22234A1000C52: RNCC: 5 | RNVC: 2

9 Mar 1983

5340-12-164-9185
Handle Grip

121649185
681-27340.03: RNCC: 3 | RNVC: 2
681-27340-03: RNCC: 5 | RNVC: 2
681-27340-03: RNCC: 5 | RNVC: 9
681-27340.03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-332-7068
Clamping Catch

123327068
PAT 250/03: RNCC: 3 | RNVC: 2
10.1688: RNCC: 5 | RNVC: 2
2125.003-03: RNCC: 5 | RNVC: 2
60450: RNCC: 5 | RNVC: 2
2125.003-03: RNCC: 5 | RNVC: 2

8 Sep 1993

5340-12-311-2716
Mending Plate

123112716
1304996: RNCC: 3 | RNVC: 2
4300.165.00.00.049: RNCC: 5 | RNVC: 2
4300.165.00/49: RNCC: 5 | RNVC: 2

11 Aug 1987

5340-12-348-4527
Access Cover

123484527
G10-74-110-30-0: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-12-702-5093
Mounting Bracket

127025093
VG95211-ML-127025093: RNCC: 2 | RNVC: 2
5.51.6501.1110.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-384-6670
Mechanical Stop

123846670
F1.1189-30-10-10.20-00: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-12-305-4337
Loop Clamp

123054337
SP8047.61/9ZY: RNCC: 3 | RNVC: 2
9271409802: RNCC: 5 | RNVC: 2
P769271409802: RNCC: 5 | RNVC: 2
1218047061: RNCC: 5 | RNVC: 2
P769271409802000: RNCC: 5 | RNVC: 2
P509271409802000: RNCC: 5 | RNVC: 9

6 Nov 1985

5340-12-162-7912
Retaining Strap

121627912
27 576-001: RNCC: 3 | RNVC: 2
27576-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-166-6814
Mending Plate

121666814
1200009-0700-017: RNCC: 2 | RNVC: 2
3415024029: RNCC: 5 | RNVC: 2
34150 24029: RNCC: 5 | RNVC: 9

7 Oct 1976

5340-12-167-2508
Angle Bracket

121672508
23290-052000-019: RNCC: 2 | RNVC: 2
23290-052000.019: RNCC: 5 | RNVC: 9

7 Dec 1976

5340-12-337-0857
Loop Clamp

123370857
LNG416/16PP: RNCC: 3 | RNVC: 2

18 Jan 1995

5340-12-323-7524
Dust And Moisture Seal Protective Plug

123237524
300F211-SCHWARZ: RNCC: 3 | RNVC: 2
1370407: RNCC: 5 | RNVC: 2
F211-SCHWARZ: RNCC: 5 | RNVC: 2
GPN300,F211-SCHWARZ: RNCC: 5 | RNVC: 2

13 Dec 1990

5340-12-315-7249
Swivel Caster

123157249
LK-STARU-100LR: RNCC: 3 | RNVC: 2
139F/LK-STARU/100LR: RNCC: 5 | RNVC: 2
151J/LK-STARU/100LR: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-199-5448
Gummi- Riemen

121995448
2300088-310663.00: RNCC: 2 | RNVC: 2
2300088-310663.00: RNCC: 3 | RNVC: 2
9844513: RNCC: 5 | RNVC: 9
2300088-310663-00: RNCC: 5 | RNVC: 9
2300088-310663.00: RNCC: 5 | RNVC: 9

10 May 1984

5340-12-344-7161
Mounting Plate

123447161
AFG002480: RNCC: 3 | RNVC: 2

2 Dec 1997

5340-12-130-3164
Retaining Strap

121303164
D4N285B: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-701-8178
Angle Bracket

127018178
VG95211-ML-127018178: RNCC: 2 | RNVC: 2
5.12.9205.0500.17: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-340-7753
T Bracket

123407753
6700021-202200.01: RNCC: 2 | RNVC: 2
6700021-202200.01: RNCC: 3 | RNVC: 2

11 Jun 1996

5340-12-387-6654
Access Cover

123876654
9999260-180000.007.0: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-12-342-4000
Mounting Bracket

123424000
2300395-187002.000.0: RNCC: 3 | RNVC: 2
1591585: RNCC: 5 | RNVC: 2

3 Feb 1997

5340-12-701-1186
Loop Clamp

127011186
VG95211-ML-127011186: RNCC: 2 | RNVC: 2
4728A-20-20: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-177-5249
Nonmetallic Bumper

121775249
2300002-223000.008: RNCC: 2 | RNVC: 2
2300002-223000.008: RNCC: 3 | RNVC: 2
2300002-223000.008: RNCC: 3 | RNVC: 2
2300002-223000.008: RNCC: 3 | RNVC: 2
2300002-223000-008: RNCC: 5 | RNVC: 9
2300002-223000.008: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-303-2663
Shimmy Damper

123032663
053015: RNCC: 3 | RNVC: 2
06-08-110-311-0200N: RNCC: 5 | RNVC: 2
06-08-110-311/0200N: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-300-7990
Angle Bracket

123007990
23114-5006.31: RNCC: 2 | RNVC: 2
23114-5006.31: RNCC: 3 | RNVC: 2
23114-5006.31: RNCC: 5 | RNVC: 9
23114-5006-31: RNCC: 5 | RNVC: 9
23114-5006.31: RNCC: 5 | RNVC: 9
23114-5006-31: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-185-1878
Electrical-Mechanical Equipment Post

121851878
5801505-3111-008: RNCC: 3 | RNVC: 2
5801505-3111.008: RNCC: 5 | RNVC: 2
5801505-3111-008: RNCC: 5 | RNVC: 9

18 Sep 1980

5340-12-346-6438
Nut And Bolt Retainer

123466438
230500: RNCC: 2 | RNVC: 2
230500: RNCC: 3 | RNVC: 2
1647EZ-23500: RNCC: 5 | RNVC: 2

20 Aug 1998

5340-12-337-0488
Resilient Mount

123370488
DIN95363B30X30-M8X13-NR55ST: RNCC: 2 | RNVC: 2
DIN95363-B30X30-M8X13-NR55ST: RNCC: 2 | RNVC: 2
510027-M8X13.NR55.ST: RNCC: 5 | RNVC: 2
88.96210-0057: RNCC: 5 | RNVC: 2
88962100057: RNCC: 5 | RNVC: 2
VG95363-B30X30-M8X13-NR55ST: RNCC: 5 | RNVC: 9
VG95363B30X30-M8X13-NR55ST: RNCC: 5 | RNVC: 9

16 Jan 1995

5340-12-188-4852
Detent Plunger

121884852
03062600: RNCC: 3 | RNVC: 2
03062600-294: RNCC: 5 | RNVC: 9

13 Jul 1981

5340-12-352-9847
Dust And Moisture Seal Protective Cap

123529847
KU003: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-314-6109
Rigid Caster

123146109
2478DIK100P60: RNCC: 3 | RNVC: 2
2478DHK100P60: RNCC: 5 | RNVC: 9

22 Jul 1988

5340-12-378-5943
Mounting Bracket

123785943
9132733000: RNCC: 3 | RNVC: 2

23 Apr 2009

5340-12-189-0431
Nonmetallic Bumper

121890431
158 037: RNCC: 3 | RNVC: 2
158037: RNCC: 5 | RNVC: 2
158 037: RNCC: 5 | RNVC: 9
158037: RNCC: 5 | RNVC: 9

20 Aug 1981

5340-12-316-6288
Mounting Plate

123166288
5802017-705100.01: RNCC: 2 | RNVC: 2
5802017-705100.01: RNCC: 3 | RNVC: 2

30 Jan 1989

5340-12-334-0270
Dust And Moisture Seal Boot

123340270
3390502010: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-12-311-9089
Angle Bracket

123119089
2300074-5524.01: RNCC: 2 | RNVC: 2
2300074-5524.01: RNCC: 5 | RNVC: 2
2300074-5524.01: RNCC: 5 | RNVC: 9

29 Oct 1987

5340-12-317-3442
Spring Loaded Cylinder Fastener

123173442
0758625: RNCC: 3 | RNVC: 2
0758625: RNCC: 5 | RNVC: 9
0785625: RNCC: 5 | RNVC: 9

30 Mar 1989

5340-12-311-8855
Access Cover

123118855
162527: RNCC: 3 | RNVC: 2
162527: RNCC: 5 | RNVC: 9

27 Oct 1987

5340-12-317-0984
Angle Bracket

123170984
136M51712: RNCC: 3 | RNVC: 2

10 Mar 1989

5340-12-043-2934

5340-12-044-4234

5340-12-043-5957

5340-12-198-2428
Angle Bracket

121982428
66.3851.521.05-A001: RNCC: 3 | RNVC: 2
161784: RNCC: 5 | RNVC: 2

5 Jan 1984

5340-12-359-6871
Mounting Bracket

123596871
9454290740: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-365-7091
Headless Straight Rod

123657091
9438150036: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-337-9941
Multiple Angle Bracket

123379941
7147701: RNCC: 3 | RNVC: 2
GZ71477: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-312-6806
Mounting Bracket

123126806
1071636: RNCC: 2 | RNVC: 2
1071636: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-12-364-3976
Mounting Plate

123643976
T621P1002202: RNCC: 3 | RNVC: 2

21 Sep 2004

5340-12-359-7310
Access Cover

123597310
S281M2021208: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-091-3372

5340-12-094-5691

5340-12-339-3090
Access Cover

123393090
0501 310 970: RNCC: 3 | RNVC: 2
2153212500004: RNCC: 5 | RNVC: 2
60168452: RNCC: 5 | RNVC: 2
60168452: RNCC: 5 | RNVC: 2
60168452ED58-6271: RNCC: 5 | RNVC: 2

8 Nov 1995

5340-12-337-8862
Mounting Bracket

123378862
1602-101300.000.0: RNCC: 2 | RNVC: 2
1602-101300.000.0: RNCC: 3 | RNVC: 2

27 Apr 1995

5340-12-392-4760
Webbing Strap

123924760
4100038-150216.000.0: RNCC: 2 | RNVC: 2
4100038-150216.000.0: RNCC: 3 | RNVC: 2

12 Jun 2013

5340-12-342-4919
Retaining Strap

123424919
9893444: RNCC: 3 | RNVC: 9
463-061903.000: RNCC: 5 | RNVC: 9

19 Feb 1997

5340-12-701-4211
Loop Clamp

127014211
VG95211-ML-127014211: RNCC: 2 | RNVC: 2
5.12.5312.1000.17: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-8040
Angle Bracket

127018040
VG95211-ML-127018040: RNCC: 2 | RNVC: 2
5.12.8605.0950.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-4103
Metal Grille

123214103
5-621-0766: RNCC: 3 | RNVC: 2

16 May 1990

5340-12-338-8541
Multiple Angle Bracket

123388541
463-223065.001: RNCC: 3 | RNVC: 9
9898543: RNCC: 5 | RNVC: 9

31 Aug 1995

5340-12-702-5079
Mounting Bracket

127025079
VG95211-ML-127025079: RNCC: 2 | RNVC: 2
5.51.6501.1073.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-192-6696
Nonmetallic Bumper

121926696
15075-1.127: RNCC: 3 | RNVC: 2
15075-1-127: RNCC: 5 | RNVC: 2

12 May 1982

5340-12-367-9645
Angle Bracket

123679645
50 03 03-00-M-02-00-00: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-12-197-6755
Angle Bracket

121976755
P-296873-410: RNCC: 3 | RNVC: 2
P296873-410: RNCC: 5 | RNVC: 2

14 Nov 1983

5340-12-368-7923
Access Cover

123687923
2300397-182044.000.0: RNCC: 3 | RNVC: 2
1591449: RNCC: 5 | RNVC: 9

20 Apr 2006

5340-12-199-7654
Dust And Moisture Seal Protective Cap

121997654
250/70: RNCC: 3 | RNVC: 2
GPN250/70: RNCC: 5 | RNVC: 2
4429870145: RNCC: 5 | RNVC: 2
11.00574.4.2: RNCC: 5 | RNVC: 9
250-70: RNCC: 5 | RNVC: 9
250070000: RNCC: 5 | RNVC: 9
GPN250-70: RNCC: 5 | RNVC: 9

29 May 1984

5340-12-701-6536
Angle Bracket

127016536
VG95211-ML-127016536: RNCC: 2 | RNVC: 2
5.12.7207.1211.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-3909
Loop Clamp

127013909
VG95211-ML-127013909: RNCC: 2 | RNVC: 2
5.12.5311.1000.21: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-374-8535
Access Cover

123748535
SK796-194340.001.0: RNCC: 3 | RNVC: 2
7079179: RNCC: 5 | RNVC: 2
1826533: RNCC: 5 | RNVC: 9

31 Mar 2008

5340-12-324-3473
Webbing Strap

123243473
335947-8211.000: RNCC: 2 | RNVC: 2
335947-8211.000: RNCC: 3 | RNVC: 2
335947-8211.000: RNCC: 5 | RNVC: 9
000-D11-22X2,0X115-PE-RAL6031: RNCC: 6 | RNVC: 9

7 Feb 1991

5340-12-701-5573
Loop Clamp

127015573
VG95211-ML-127015573: RNCC: 2 | RNVC: 2
5.12.6113.8050.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-323-9172
Resilient Mount

123239172
VG95365-C2-CR-AMST: RNCC: 3 | RNVC: 2
E1N 2528-02: RNCC: 3 | RNVC: 2
1957007: RNCC: 5 | RNVC: 2
E1N2528-02: RNCC: 5 | RNVC: 2
VG95365-C2-CR-AMST: RNCC: 5 | RNVC: 9

9 Jan 1991

5340-12-310-9208
Angle Bracket

123109208
C22136-A1000-C834: RNCC: 3 | RNVC: 2

9 Jul 1987

5340-12-362-4774
Mounting Bracket

123624774
33067-002-006: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-12-189-0550
Dust And Moisture Seal Protective Cap

121890550
2579-2000.03: RNCC: 2 | RNVC: 2
114008: RNCC: 3 | RNVC: 2
2579-2000-03: RNCC: 5 | RNVC: 2
2579-2000.03: RNCC: 5 | RNVC: 2
2579-2000.03: RNCC: 5 | RNVC: 2
2579-2000-03: RNCC: 5 | RNVC: 2
2579-2000.03: RNCC: 5 | RNVC: 2
2579-2000-03: RNCC: 5 | RNVC: 9

24 Aug 1981

5340-12-312-5902
Electrical-Mechanical Equipment Post

123125902
615.06-05-00-00-008: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-308-3250
Shelf Bracket

123083250
5800043-1971.00: RNCC: 2 | RNVC: 2
5800043-1971.00: RNCC: 3 | RNVC: 2
5800043-1971.00: RNCC: 5 | RNVC: 9

26 Sep 1986

5340-12-353-5076
Manual Control Handle

123535076
589115: RNCC: 3 | RNVC: 2
1-14NAN2344: RNCC: 5 | RNVC: 2
3922-0014-589115: RNCC: 5 | RNVC: 2

3 Apr 2001

5340-12-701-6948
Angle Bracket

127016948
VG95211-ML-127016948: RNCC: 2 | RNVC: 2
5.12.7222.1006.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-337-2377
Mounting Bracket

123372377
2500255-195210.000.0: RNCC: 2 | RNVC: 2
2500255-195210.000.0: RNCC: 3 | RNVC: 2
2500255-195210-000-0: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-186-9342
Wood Runner

121869342
A87-24590: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-12-162-3538
Clamping Catch

121623538
DIN3134-D95-G18X19BK: RNCC: 2 | RNVC: 2
AK95DIN3134R0H: RNCC: 5 | RNVC: 2
DIN3134-D95-G18X19-BK: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-349-6474
T Bracket

123496474
5803671-201200.03: RNCC: 2 | RNVC: 2
0106.21203.220: RNCC: 3 | RNVC: 2
5803671-201200.03: RNCC: 5 | RNVC: 2
5803671-201200.03: RNCC: 5 | RNVC: 2

14 Dec 1999

5340-12-701-9318
Pawl Fastener

127019318
VG95211-ML-127019318: RNCC: 2 | RNVC: 2
2.12.5101.1731.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-355-8057
Mounting Bracket

123558057
2125-121605A00C: RNCC: 2 | RNVC: 2
2125-121605A00C: RNCC: 3 | RNVC: 2

17 Dec 2001

5340-12-338-1088
Access Door

123381088
160-76190: RNCC: 3 | RNVC: 2
15160-76190: RNCC: 5 | RNVC: 2
160-76190: RNCC: 5 | RNVC: 9

23 May 1995

5340-12-306-3992
Mending Plate

123063992
V22.917.2-11: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-378-3731
Mending Plate

123783731
9997023-206200.015.0: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-314-2168
Angle Bracket

123142168
512214-0419.000: RNCC: 3 | RNVC: 2
512214-0419: RNCC: 5 | RNVC: 2

17 Jun 1988

5340-12-187-5493
Mounting Plate

121875493
1216 0134: RNCC: 3 | RNVC: 2
12160134: RNCC: 5 | RNVC: 9
6.226.0.974.011.4: RNCC: 5 | RNVC: 9
6-226-0-974-011-4: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-702-5351
Angle Bracket

127025351
VG95211-ML-127025351: RNCC: 2 | RNVC: 2
5.51.7204.0420.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-328-4023
Catch Strike

123284023
2653-180000.29: RNCC: 2 | RNVC: 2
2653-180000.29: RNCC: 3 | RNVC: 2

15 May 1992

5340-12-386-3340
Mechanical Stop

123863340
009-221.450-019: RNCC: 2 | RNVC: 2
009-221.450-019: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-191-0578
Webbing Strap

121910578
5801384-3192: RNCC: 2 | RNVC: 2
5801384-3192: RNCC: 3 | RNVC: 2
000-F1-25X2,0X350-PE-RAL6031: RNCC: 6 | RNVC: 9

11 Jan 1982

5340-12-188-9748
Spring Tension Clip

121889748
13731020: RNCC: 3 | RNVC: 2
13 731 020: RNCC: 5 | RNVC: 2
DFM04056750000: RNCC: 5 | RNVC: 2
13731003: RNCC: 5 | RNVC: 9
01267413: RNCC: 5 | RNVC: 9
1267413EE8751-12: RNCC: 5 | RNVC: 9

13 Aug 1981

5340-12-352-9048
Rod End Connector

123529048
JN0255-10GK: RNCC: 3 | RNVC: 2

4 Jan 2001

5340-12-348-0337
Mounting Bracket

123480337
272.362 838: RNCC: 2 | RNVC: 2
272.362.838: RNCC: 3 | RNVC: 2
8708 632-001: RNCC: 3 | RNVC: 2
272.362 838: RNCC: 5 | RNVC: 9

30 Mar 1999

5340-12-356-5230
Angle Bracket

123565230
11.05943-0022: RNCC: 3 | RNVC: 2
11.05900-0080LEG013: RNCC: 5 | RNVC: 2

7 Mar 2002

5340-12-379-0839
Spacing Threaded Standoff

123790839
PAN5170-08-050: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-12-378-0641
Handle Grip

123780641
320.001-240: RNCC: 3 | RNVC: 2

10 Mar 2009

5340-12-303-0932
Dust And Moisture Seal Protective Plug

123030932
6900097-000.03: RNCC: 2 | RNVC: 2
6900097-000-03: RNCC: 5 | RNVC: 9
6900097-000.03: RNCC: 5 | RNVC: 9

25 Feb 1985

5340-12-317-7335
Mounting Bracket

123177335
3640401: RNCC: 3 | RNVC: 2

5 May 1989

5340-12-155-0766
Plain Solid Disk

121550766
1001948: RNCC: 3 | RNVC: 2
S25-02.014-01.4: RNCC: 5 | RNVC: 2
S25-02-014-01-4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-700-6119
Flush Lock

127006119
VG95211-ML-127006119: RNCC: 2 | RNVC: 2
5.12.0100.2600.00: RNCC: 3 | RNVC: 2
0501400103390: RNCC: 5 | RNVC: 2

29 Sep 1992

5340-12-300-3001
Angle Bracket

123003001
250146-271600.01.0: RNCC: 2 | RNVC: 2
250146-271600.01.0: RNCC: 3 | RNVC: 2
250146-271600-01-0: RNCC: 5 | RNVC: 2
250146-271600.01.0: RNCC: 5 | RNVC: 9

21 Jul 1984

5340-12-196-9844
Double Angle Bracket

121969844
4900059-323471.000.0: RNCC: 3 | RNVC: 2
4900059-323471-000-0: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-361-7873
Mounting Bracket

123617873
1960-010400.000.0: RNCC: 3 | RNVC: 2

18 Nov 2003

5340-12-358-0604
Lock-Release Lever

123580604
2500262-190713.000.0: RNCC: 2 | RNVC: 2
2500262-190713.000.0: RNCC: 3 | RNVC: 2

9 Sep 2002

5340-12-337-3072
Access Cover

123373072
701-311140-000-0: RNCC: 2 | RNVC: 2
701-311140-000-0: RNCC: 3 | RNVC: 2
701-311 140-000-0: RNCC: 5 | RNVC: 2

14 Feb 1995

5340-12-362-6410
Mending Plate

123626410
2300269-186300.002.0: RNCC: 2 | RNVC: 2
2300269-186300.002.0: RNCC: 3 | RNVC: 2

13 Mar 2004

5340-12-301-7357
Resilient Mount

123017357
SK400-130080.000.0: RNCC: 3 | RNVC: 2
SK400-130020-000-0: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-365-1481
Mounting Bracket

123651481
2300109-182043.004.0: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-326-1450
Butt Hinge Leaf

123261450
2300348-187000.005.0: RNCC: 2 | RNVC: 2
2300348-187000.005.0: RNCC: 3 | RNVC: 2

12 Aug 1991

5340-12-323-9086
Nonmetallic Bumper

123239086
2300014-189310.03.0: RNCC: 2 | RNVC: 2
2300014-189310.03.0: RNCC: 3 | RNVC: 2

8 Jan 1991

5340-12-158-8907
Clamping Catch

121588907
DIN3134-D70-G15X17BK: RNCC: 2 | RNVC: 2
19-132440-11012: RNCC: 5 | RNVC: 2
1116552: RNCC: 5 | RNVC: 2
AK70DIN3134R0H: RNCC: 5 | RNVC: 2
DIN3134-AK70-ROH: RNCC: 5 | RNVC: 2
DIN3134-AK70ROH: RNCC: 5 | RNVC: 2
DIN3134-D70-G15X17-BK: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-186-1453
Electrical-Mechanical Equipment Post

121861453
512206-3995.000: RNCC: 3 | RNVC: 2
512206-3995: RNCC: 5 | RNVC: 2
512206-3995-000: RNCC: 5 | RNVC: 2

2 Dec 1980

5340-12-123-3168
Hasp Staple

121233168
F5565-10-03-10: RNCC: 3 | RNVC: 2
5565-10-03-10: RNCC: 5 | RNVC: 2
5565-10-03.10: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-191-5130
Door Handle

121915130
6188-02.0251: RNCC: 3 | RNVC: 2
GLZ4750007P17: RNCC: 5 | RNVC: 2

8 Feb 1982

5340-12-177-6638
Rod End Clevis

121776638
105-23503.50: RNCC: 3 | RNVC: 2
105-23503-50: RNCC: 5 | RNVC: 2

12 Feb 1979

5340-12-306-7557
Angle Bracket

123067557
P-243827-751: RNCC: 3 | RNVC: 2
P243827-751: RNCC: 5 | RNVC: 2

27 Mar 1986

5340-12-387-9124
Bumper

123879124
7093965: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-12-371-7878
Angle Bracket

123717878
4120315039: RNCC: 3 | RNVC: 2
7392642: RNCC: 5 | RNVC: 2

16 May 2007

5340-12-346-2063
Mounting Bracket

123462063
2996.67.67: RNCC: 3 | RNVC: 2

29 Jun 1998

5340-12-321-3589
Loop Clamp

123213589
81974450134: RNCC: 3 | RNVC: 2
81.97445.0134: RNCC: 5 | RNVC: 2

9 May 1990

5340-12-121-0205
Loop Clamp

121210205
81974200010: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-375-6854
Spacing Threaded Standoff

123756854
L321M5821209: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-12-368-2502
Lock-Release Lever

123682502
207-9055: RNCC: 3 | RNVC: 2

17 Jan 2006

5340-12-379-9893
Bumper

123799893
80000780: RNCC: 3 | RNVC: 2

17 Sep 2009

5340-12-352-7131
Access Cover

123527131
64416350: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-194-1913
Spring Tension Clip

121941913
5181655: RNCC: 3 | RNVC: 2
518.1655: RNCC: 5 | RNVC: 2

11 Oct 1982

5340-12-199-1143
Retaining Strap

121991143
02.10.057.001.003: RNCC: 3 | RNVC: 2
02.10.057.001.003: RNCC: 5 | RNVC: 9
0210057001003: RNCC: 5 | RNVC: 9

28 Mar 1984

5340-12-198-7893
Bow Handle

121987893
3356985336: RNCC: 3 | RNVC: 2

27 Feb 1984

5340-12-314-1289
Access Door

123141289
AZ1006G172: RNCC: 3 | RNVC: 2
AZ1006G172: RNCC: 5 | RNVC: 9

9 Jun 1988

5340-12-367-5254
Dust And Moisture Seal Protective Plug

123675254
444955647: RNCC: 3 | RNVC: 2

29 Aug 2005

5340-12-352-1000
Mending Plate

123521000
5201468: RNCC: 3 | RNVC: 2

17 Oct 2000

5340-12-370-5514
Nonmetallic Bumper

123705514
6090000014: RNCC: 3 | RNVC: 2

21 Nov 2006

5340-12-340-2624
Access Cover

123402624
806C01507: RNCC: 3 | RNVC: 2
806C01507 E1: RNCC: 5 | RNVC: 2

20 Mar 1996

5340-12-329-0177
Webbing Strap

123290177
4080-906: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-12-372-3322
Mending Plate

123723322
C42393A78C141: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-12-341-8766
Sealing Plug Assembly

123418766
MB 800-040: RNCC: 3 | RNVC: 2
003689-0000: RNCC: 5 | RNVC: 2
0036890000: RNCC: 5 | RNVC: 2

9 Nov 1996

5340-12-338-5550
Lock-Release Lever

123385550
2300002-181044: RNCC: 2 | RNVC: 2

26 Jul 1995

5340-12-306-9109
Access Cover

123069109
0335 6970: RNCC: 3 | RNVC: 2
03356970EE0141-01: RNCC: 5 | RNVC: 2
8 350 820 ITEM 40: RNCC: 5 | RNVC: 2
8 350 820-40: RNCC: 5 | RNVC: 2

16 Apr 1986

5340-12-145-7818
Webbing Strap

121457818
2550-314-1: RNCC: 3 | RNVC: 2
5636 066992: RNCC: 5 | RNVC: 9
5636066992: RNCC: 5 | RNVC: 9
6-0925-0028: RNCC: 5 | RNVC: 9
6-925-28: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-3097
Plain Solid Disk

123063097
421-112060.03.3: RNCC: 3 | RNVC: 2
421-112060-03-3: RNCC: 5 | RNVC: 2

18 Feb 1986

5340-12-376-5801
Angle Bracket

123765801
42-14129-100: RNCC: 3 | RNVC: 2
42-14-129.1: RNCC: 5 | RNVC: 2

20 Oct 2008

5340-12-346-2438
Spacing Threaded Standoff

123462438
1201 9607: RNCC: 3 | RNVC: 2
A26.658-038/2.4: RNCC: 5 | RNVC: 9

2 Jul 1998

5340-12-702-0027
Loop Clamp

127020027
VG95211-ML-127020027: RNCC: 2 | RNVC: 2
1667S50-11,5: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-342-2396
Helical Compression Spring Seat

123422396
11200720127: RNCC: 3 | RNVC: 2
11.20072-0127: RNCC: 5 | RNVC: 2
11200720127: RNCC: 5 | RNVC: 2
200.07.053: RNCC: 5 | RNVC: 2

9 Jan 1997

5340-12-188-2641
Platte

121882641
4312 712 18870: RNCC: 3 | RNVC: 2
431271218870: RNCC: 5 | RNVC: 2
5801685-421300.01: RNCC: 5 | RNVC: 9
5801685-421300-01: RNCC: 5 | RNVC: 9

23 Jun 1981

5340-12-159-7326
Quick Release Plunger

121597326
14021-15005-00: RNCC: 3 | RNVC: 2
893645: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-5719
Retaining Band

127015719
VG95211-ML-127015719: RNCC: 2 | RNVC: 2
5.12.6149.0300.17: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-389-2290
Angle Bracket

123892290
601251-201225.02: RNCC: 2 | RNVC: 2
601251-201225.02: RNCC: 3 | RNVC: 2

11 Jun 2012

5340-12-317-8024
Mending Plate

123178024
P-616815-027: RNCC: 3 | RNVC: 2
P616815-027: RNCC: 5 | RNVC: 2

16 May 1989

5340-12-346-0874
Mounting Bracket

123460874
1202 6065: RNCC: 3 | RNVC: 2
26.658-037/2.2: RNCC: 5 | RNVC: 2
26.658-037/2.2: RNCC: 5 | RNVC: 9

9 Jun 1998

5340-12-197-5840
Mending Plate

121975840
A-230129-145: RNCC: 3 | RNVC: 2
A230129-145: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-142-9690
Retaining Strap

121429690
VG95211-ML-121429690: RNCC: 2 | RNVC: 2
A10-31-270-14-0: RNCC: 3 | RNVC: 2
A10-31-270-14-0: RNCC: 5 | RNVC: 2
A10-31-270-14-0: RNCC: 5 | RNVC: 2
A10-31-270-14-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-7816
Mounting Bracket

127017816
VG95211-ML-127017816: RNCC: 2 | RNVC: 2
5.12.7800.8160.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-381-0283
Webbing Strap

123810283
9999075-971040.000.0: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-12-195-8512
Access Cover

121958512
P-896069-401: RNCC: 3 | RNVC: 2
P896069-401: RNCC: 5 | RNVC: 2

25 Apr 1983

5340-12-191-1600
Resilient Mount

121911600
60165002-C: RNCC: 3 | RNVC: 2
E1N 101-06: RNCC: 3 | RNVC: 2
E1N101-06: RNCC: 5 | RNVC: 2
VG95365-C6-CR-ST: RNCC: 5 | RNVC: 9

14 Jan 1982

5340-12-359-8153
Mounting Plate

123598153
2500261-180000.239.0: RNCC: 2 | RNVC: 2
2500261-180000.239.0: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-12-171-3404
Hasp Staple

121713404
23230-184868.000.0: RNCC: 2 | RNVC: 2
293454: RNCC: 3 | RNVC: 2
81669134015: RNCC: 3 | RNVC: 2
81.66913-4015: RNCC: 5 | RNVC: 2
23230-184868-000-0: RNCC: 5 | RNVC: 9
23230-184868.000.0: RNCC: 5 | RNVC: 9

30 Sep 1977

5340-12-371-2768
Retaining Strap

123712768
SK861-060000.013.0: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-12-383-7762
Dust And Moisture Seal Protective Cap

123837762
NO PRIMARY REF 12-383-7762: RNCC: 3 | RNVC: 2
989606: RNCC: 5 | RNVC: 2

7 Dec 2010

5340-12-354-9622
Mounting Bracket

123549622
8854 100-101: RNCC: 3 | RNVC: 2

11 Sep 2001

5340-12-334-6620
Mounting Bracket

123346620
272.1329.122-01: RNCC: 3 | RNVC: 2
272-1329-122-01: RNCC: 5 | RNVC: 9

7 Jun 1994

5340-12-344-8928
Angle Bracket

123448928
U15.143000.01-00: RNCC: 3 | RNVC: 2

8 Jan 1998

5340-12-305-6557
Mounting Bracket

123056557
0A844.18-00-00-00-005: RNCC: 3 | RNVC: 2
844-18-000000005-0A: RNCC: 5 | RNVC: 9

29 Nov 1985

5340-12-173-0440
Nonmetallic Bumper

121730440
SK1259: RNCC: 3 | RNVC: 2
42482086: RNCC: 5 | RNVC: 2
42482086EY5017-36: RNCC: 5 | RNVC: 2

15 Mar 1978

5340-12-309-0414
Mending Plate

123090414
5803561-000014.00: RNCC: 2 | RNVC: 2
7400085-1214.00: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-12-330-4342
Mounting Bracket

123304342
W-32-213-B: RNCC: 3 | RNVC: 2

15 Dec 1992

5340-12-365-3739
Mounting Bracket

123653739
2300226-196600.000.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-188-2530
Spring Tension Clip

121882530
C16: RNCC: 3 | RNVC: 2
C37476860P: RNCC: 5 | RNVC: 2
C 3747 686 -P: RNCC: 5 | RNVC: 2
C3747686-P: RNCC: 5 | RNVC: 2
C37476860P: RNCC: 5 | RNVC: 2
C 3747 686 -P: RNCC: 5 | RNVC: 2
C3747686-P: RNCC: 5 | RNVC: 2

22 Jun 1981

5340-12-344-2290
Mounting Plate

123442290
463-068311.000: RNCC: 3 | RNVC: 9
9890273: RNCC: 5 | RNVC: 9

2 Oct 1997

5340-12-343-1650
Handle Grip

123431650
E.ST.W85.300-3300-03: RNCC: 3 | RNVC: 2
E.ST.W85.300-3300-03: RNCC: 5 | RNVC: 9

13 May 1997

5340-12-342-6934
Helical Compression Spring Seat

123426934
06-321C .5NPT POS-082: RNCC: 3 | RNVC: 2

18 Mar 1997

5340-12-320-3970
Access Cover

123203970
0223 7847: RNCC: 3 | RNVC: 2
02237847EC0150-01: RNCC: 5 | RNVC: 2
2237847: RNCC: 5 | RNVC: 2
89233138: RNCC: 5 | RNVC: 2

10 Jan 1990

5340-12-326-6099
Flare Lock Fastener

123266099
C 7098 250 Y2: RNCC: 3 | RNVC: 2
21100-662: RNCC: 3 | RNVC: 2
35905-332: RNCC: 3 | RNVC: 2
35 905-332: RNCC: 5 | RNVC: 9

14 Oct 1991

5340-12-198-3330
Retaining Strap

121983330
23114-3700.08: RNCC: 2 | RNVC: 2
23114-3700.08: RNCC: 3 | RNVC: 2
23114-3700.08: RNCC: 5 | RNVC: 9
23114-3700-08: RNCC: 5 | RNVC: 9
23114-3700-08: RNCC: 5 | RNVC: 9
23114-3700.08: RNCC: 5 | RNVC: 9

16 Jan 1984

5340-12-330-4100
Lock-Release Lever

123304100
06430-2083X30: RNCC: 3 | RNVC: 2
0120803003: RNCC: 3 | RNVC: 2
01 208 030 03: RNCC: 3 | RNVC: 2
8511914.074: RNCC: 5 | RNVC: 2
0851 1914.074: RNCC: 5 | RNVC: 2
NLM643-2083X30: RNCC: 5 | RNVC: 9
NLM643-208X30GRAU: RNCC: 5 | RNVC: 9
NLM643.1208X30GRAU: RNCC: 5 | RNVC: 9
NLM6430-2083X30: RNCC: 5 | RNVC: 9

11 Dec 1992

5340-12-172-5415
Mending Plate

121725415
1000078-433200.02: RNCC: 2 | RNVC: 2
1000078-433200.02: RNCC: 3 | RNVC: 2
1000078-433200-02: RNCC: 5 | RNVC: 9
1000078-433200.02: RNCC: 5 | RNVC: 9
1000078-433200-02: RNCC: 5 | RNVC: 9

26 Jan 1978

5340-12-340-4285
Mounting Plate

123404285
V048K2: RNCC: 3 | RNVC: 2
V048K2 (IDVCS065-117.895): RNCC: 5 | RNVC: 2

12 Apr 1996

5340-12-391-8660
Angle Bracket

123918660
5070000-030000.008.0: RNCC: 3 | RNVC: 2

15 Apr 2013

5340-12-163-9033
Rod End Clevis

121639033
HAN17605-1-2: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-340-6708
Mounting Plate

123406708
V0028R: RNCC: 3 | RNVC: 2
V0028R (IDVCS065-117.895): RNCC: 5 | RNVC: 2
PL E 7/1 P-26: RNCC: 5 | RNVC: 2

22 May 1996

5340-12-328-6613
Protection Bellows

123286613
281711183A: RNCC: 3 | RNVC: 2
281711 183A: RNCC: 5 | RNVC: 2

12 Jun 1992

5340-12-359-1946
Mounting Bracket

123591946
9416800914: RNCC: 3 | RNVC: 2

9 Jan 2003

5340-12-332-3951
Access Cover

123323951
681489411: RNCC: 3 | RNVC: 2
681.4894.11: RNCC: 5 | RNVC: 2

6 Aug 1993

5340-12-701-4802
Retaining Bail

127014802
VG95211-ML-127014802: RNCC: 2 | RNVC: 2
5.12.5811.1462.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-4096
Mounting Bracket

127014096
VG95211-ML-127014096: RNCC: 2 | RNVC: 2
5.12.5311.8350.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5667
Angle Bracket

127025667
VG95211-ML-127025667: RNCC: 2 | RNVC: 2
5.51.7614.0516.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-3328
Mounting Bracket

127013328
VG95211-ML-127013328: RNCC: 2 | RNVC: 2
5.12.5105.0660.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-301-6375
Angle Bracket

123016375
43712235-301: RNCC: 2 | RNVC: 2
43712235-301: RNCC: 3 | RNVC: 2
43712235-301: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-171-4407
Compression Cup

121714407
4A90917: RNCC: 3 | RNVC: 2
42483864EY5075-28: RNCC: 5 | RNVC: 2
81.52136-0013: RNCC: 5 | RNVC: 2
81521360013: RNCC: 5 | RNVC: 2
42483864: RNCC: 5 | RNVC: 2

13 Oct 1977

5340-12-159-6765
Nonmetallic Bumper

121596765
GH2-60-87A: RNCC: 3 | RNVC: 9
5000050574: RNCC: 5 | RNVC: 2
5000050574: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-4853
Helical Compression Spring Seat

123124853
2410020013: RNCC: 3 | RNVC: 2
81111310028: RNCC: 5 | RNVC: 2
5000803951: RNCC: 5 | RNVC: 2
5000807753: RNCC: 5 | RNVC: 2
0689043: RNCC: 5 | RNVC: 2
BOSCH-2.410.020.013: RNCC: 5 | RNVC: 2
BOSCH-2.410.020.013: RNCC: 5 | RNVC: 2

12 Jan 1988

5340-12-357-0174
Compression Cup

123570174
DRP5-10-47: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-350-8573
Multiple Angle Bracket

123508573
J28230165-001: RNCC: 3 | RNVC: 2

30 May 2000

5340-12-307-3650
Resilient Mount

123073650
SP751-310: RNCC: 3 | RNVC: 2
3755123: RNCC: 5 | RNVC: 2
3755123EY3145-04: RNCC: 5 | RNVC: 2
6100129-110: RNCC: 5 | RNVC: 2
FT6100129-110: RNCC: 5 | RNVC: 2

10 Jun 1986

5340-12-308-2178
Butt Hinge Leaf

123082178
2300223-064000.06.0: RNCC: 2 | RNVC: 2
2300223-064000.06.0: RNCC: 3 | RNVC: 2

15 Sep 1986

5340-12-388-0262
Section Block Clamp

123880262
MMN325-1/2D9-55-S235JR: RNCC: 3 | RNVC: 2
700325055100: RNCC: 5 | RNVC: 2

16 Feb 2012

5340-12-171-1213
Nonmetallic Bumper

121711213
81961010285: RNCC: 3 | RNVC: 2
81.96101.0285: RNCC: 5 | RNVC: 2
81.96101-0285: RNCC: 5 | RNVC: 2
81.96101.0285: RNCC: 5 | RNVC: 2

9 Sep 1977

5340-12-329-3732
Loop Clamp

123293732
2300354-889900-004: RNCC: 2 | RNVC: 2
70700-400046-99: RNCC: 5 | RNVC: 9

13 Aug 1992

5340-12-170-8858
Helical Compression Spring Retainer

121708858
81685120015: RNCC: 3 | RNVC: 2
7086004: RNCC: 5 | RNVC: 2
81.68512-0015: RNCC: 5 | RNVC: 2
36014047: RNCC: 5 | RNVC: 9

19 Aug 1977

5340-12-365-3330
Elbow Catch

123653330
2500075-195420.000.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-198-9816
Resilient Mount

121989816
B35H-5340-122: RNCC: 2 | RNVC: 2
M6016: RNCC: 3 | RNVC: 2
7-353-0820: RNCC: 5 | RNVC: 2
KLP GTM 6.09: RNCC: 5 | RNVC: 2

20 Mar 1984

5340-12-320-6749
Double Angle Bracket

123206749
P-244512-759: RNCC: 3 | RNVC: 2
P244512-759: RNCC: 5 | RNVC: 2

6 Feb 1990

5340-12-309-5450
Mending Plate

123095450
A-230130-007: RNCC: 3 | RNVC: 2
A230130-007: RNCC: 5 | RNVC: 2

3 Feb 1987

5340-12-332-4932
Handwheel

123324932
VG85082-G-100X12: RNCC: 2 | RNVC: 2
02-01-020-15-01A: RNCC: 5 | RNVC: 2
02-01-020-15-01-A: RNCC: 5 | RNVC: 2
02-01-020-15-01: RNCC: 5 | RNVC: 9

17 Aug 1993

5340-12-172-1610
Retaining Band

121721610
2382-262010.02.0: RNCC: 2 | RNVC: 2
2382-262010-02-0: RNCC: 5 | RNVC: 2
2382-262010.02.0: RNCC: 5 | RNVC: 2
2382-262010-02-0: RNCC: 5 | RNVC: 2
2382-262010.02.0: RNCC: 5 | RNVC: 2
2382-262010-02-0: RNCC: 5 | RNVC: 9
2382-262010.02.0: RNCC: 5 | RNVC: 9

27 Dec 1977

Load More Results