What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 16 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 16 of 178

5340-12-313-6648
Handle Grip

123136648
P-896449-005: RNCC: 3 | RNVC: 2
P896449-005: RNCC: 5 | RNVC: 2

23 Apr 1988

5340-12-174-0283
Dust And Moisture Seal Protective Cap

121740283
340800: RNCC: 3 | RNVC: 2
7-503-0453: RNCC: 5 | RNVC: 2
7012-0010-340800: RNCC: 5 | RNVC: 2
2839-9101: RNCC: 5 | RNVC: 2
U433A: RNCC: 5 | RNVC: 2
219352-2: RNCC: 5 | RNVC: 2

31 May 1978

5340-12-393-6523
Mounting Bracket

123936523
4100098-722030.002.0: RNCC: 2 | RNVC: 2
4100098-722030.002.0: RNCC: 3 | RNVC: 2

30 Sep 2013

5340-12-360-0054
Mounting Bracket

123600054
9415400451: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-320-2490
Mounting Bracket

123202490
505517: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-12-151-3114
Flush Catch

121513114
VG95528-3ST: RNCC: 2 | RNVC: 2
2815: RNCC: 3 | RNVC: 2
VG95528-3ST: RNCC: 3 | RNVC: 2
5800358-210000.16: RNCC: 5 | RNVC: 2
ST5800358-210000-16: RNCC: 5 | RNVC: 2
3VG95528: RNCC: 5 | RNVC: 2
5800358-210000.16: RNCC: 5 | RNVC: 9
ST5800358-210000-16: RNCC: 5 | RNVC: 9
5800358-210000.16: RNCC: 5 | RNVC: 9
ST5800358-210000-16: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-7144
Resilient Mount

123197144
830-0118169.NR60.ST: RNCC: 3 | RNVC: 2
0118169-11MN60: RNCC: 3 | RNVC: 2

27 Oct 1989

5340-12-153-9559
Dust And Moisture Seal Protective Cap

121539559
250175-1400.02: RNCC: 2 | RNVC: 2
1942113/4: RNCC: 3 | RNVC: 2
1942113-4: RNCC: 5 | RNVC: 2
250175-1400-02: RNCC: 5 | RNVC: 2
250175-1400.02: RNCC: 5 | RNVC: 2
250175-1400-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-370-9935
Dust And Moisture Seal Protective Cap

123709935
81461130116: RNCC: 3 | RNVC: 2
81.46113-0116: RNCC: 5 | RNVC: 2

24 Jan 2007

5340-12-701-5302
Mounting Bracket

127015302
VG95211-ML-127015302: RNCC: 2 | RNVC: 2
5.12.6105.0520.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-8164
Mounting Bracket

121878164
2300109-970400.083.0: RNCC: 2 | RNVC: 2
2300109-970400.083.0: RNCC: 3 | RNVC: 2
2300109-970400.083.0: RNCC: 3 | RNVC: 2
2300109-970400-083-0: RNCC: 5 | RNVC: 2
2300109-970400-083-0: RNCC: 5 | RNVC: 2
2300109-970400-083-0: RNCC: 5 | RNVC: 9
2300109-970400.083.0: RNCC: 5 | RNVC: 9

13 May 1981

5340-12-165-7437
Handwheel

121657437
5500-314-007-0: RNCC: 3 | RNVC: 2
5500-314-007-0: RNCC: 5 | RNVC: 2

24 Jun 1976

5340-12-385-6228
Mounting Bracket

123856228
3052.309.558: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-12-380-7741
Mounting Bracket

123807741
601243-622011.00: RNCC: 3 | RNVC: 2

27 Nov 2009

5340-12-318-2607
Spring Tension Clip

123182607
VSN1475A: RNCC: 3 | RNVC: 2
0029888178: RNCC: 5 | RNVC: 2

23 Jun 1989

5340-12-386-5798
Butt Hinge Leaf

123865798
T531M5500104: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-377-5755
Spring Tension Clip

123775755
7L6868243: RNCC: 3 | RNVC: 2

27 Jan 2009

5340-12-379-5774
Access Cover

123795774
7837013000: RNCC: 3 | RNVC: 2

11 Aug 2009

5340-12-323-9072
Access Cover

123239072
5812.2027: RNCC: 3 | RNVC: 2

8 Jan 1991

5340-12-331-9911
Mending Plate

123319911
160-74963-882: RNCC: 3 | RNVC: 2
160-74963-882: RNCC: 5 | RNVC: 9

15 Jul 1993

5340-12-338-4002
Double Angle Bracket

123384002
4618350012: RNCC: 3 | RNVC: 2

4 Jul 1995

5340-12-305-8220
Butt Hinge Leaf

123058220
LN9172BF: RNCC: 2 | RNVC: 2

18 Dec 1985

5340-12-359-8302
Hand Crank

123598302
300.004.925: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-360-2777
Dust And Moisture Seal Protective Cap

123602777
867807449B41: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-12-164-1052

5340-12-384-3576
Handle Grip

123843576
5.321-646.0: RNCC: 3 | RNVC: 2
5.321-646.0: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-12-356-7583
Dust And Moisture Seal Protective Cap

123567583
33.0002.200-4: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-386-1437
Manual Control Lever

123861437
2481-395920.001.0: RNCC: 2 | RNVC: 2
2481-395920.001.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-358-9311
Mounting Plate

123589311
2481-391113.002.0: RNCC: 2 | RNVC: 2
2481-391113.002.0: RNCC: 3 | RNVC: 2

29 Nov 2002

5340-12-333-9454
Rim Lock

123339454
3.30.0130.0: RNCC: 3 | RNVC: 2
3.30.130.0: RNCC: 5 | RNVC: 2
330 1300: RNCC: 5 | RNVC: 2
3.30.130.0: RNCC: 5 | RNVC: 2

25 Feb 1994

5340-12-178-9225
Nonmetallic Bumper

121789225
8730780238: RNCC: 2 | RNVC: 2
8730780238: RNCC: 3 | RNVC: 2

25 May 1979

5340-12-334-5472
Butt Hinge Leaf

123345472
073-292210-000-0: RNCC: 2 | RNVC: 2
073-292210-000-0: RNCC: 3 | RNVC: 2
073 292 210-000-0: RNCC: 5 | RNVC: 2

24 May 1994

5340-12-376-8790
Mending Plate

123768790
112548: RNCC: 3 | RNVC: 2
08.1627-203.09.06.0: RNCC: 5 | RNVC: 2

14 Nov 2008

5340-12-702-4397
Strap Hinge

127024397
VG95211-ML-127024397: RNCC: 2 | RNVC: 2
5.51.0236.0213.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-338-4596
Clamping Catch

123384596
560 8550 019: RNCC: 3 | RNVC: 2
560.8550.019: RNCC: 5 | RNVC: 2
NB-D/19-1.4371: RNCC: 5 | RNVC: 2

13 Jul 1995

5340-12-701-4572
Loop Clamp

127014572
VG95211-ML-127014572: RNCC: 2 | RNVC: 2
5.12.5314.1100.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-368-1341
Mounting Plate

123681341
5161-360100B00C: RNCC: 2 | RNVC: 2
5161-360100B00C: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-701-6240
Mounting Plate

127016240
VG95211-ML-127016240: RNCC: 2 | RNVC: 2
5.12.7030.1530.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-374-8975
Access Cover

123748975
SK976-182900.001.0: RNCC: 3 | RNVC: 2
1301542: RNCC: 5 | RNVC: 2

4 Apr 2008

5340-12-701-6397
Mounting Bracket

127016397
VG95211-ML-127016397: RNCC: 2 | RNVC: 2
5.12.7080.1370.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-004-2348

5340-12-004-0138

5340-12-004-3642

5340-12-322-3207
Rim Lock

123223207
6000517: RNCC: 3 | RNVC: 2
09-00078-111: RNCC: 5 | RNVC: 2
600 0517: RNCC: 5 | RNVC: 2

10 Aug 1990

5340-12-302-6346
Electrical-Mechanical Equipment Post

123026346
VG95148B7XM4X60-ST-B2C: RNCC: 2 | RNVC: 2
VG95148B7XM4X60-ST-B2C: RNCC: 3 | RNVC: 2
M4/M4X60WN0425031-ST-B2G: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-359-0432
Crank Handle

123590432
GN539-26-M10: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-351-2440
Angle Bracket

123512440
23290-184400.003: RNCC: 2 | RNVC: 2
9872317: RNCC: 3 | RNVC: 2
9872317: RNCC: 5 | RNVC: 9
23290-184400.003: RNCC: 5 | RNVC: 9

5 Jul 2000

5340-12-144-4323
Flush Catch

121444323
6020016: RNCC: 3 | RNVC: 2
7101-11-23-10: RNCC: 5 | RNVC: 2
7101-11-23.10: RNCC: 5 | RNVC: 2
48032: RNCC: 5 | RNVC: 2
H5000-064-142: RNCC: 5 | RNVC: 2
161433902: RNCC: 5 | RNVC: 2
7101-11-23-10: RNCC: 5 | RNVC: 9
7101-11-23.10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-162-1980
Strap Fastener Loop

121621980
5801369-0800-006: RNCC: 2 | RNVC: 2
2221024001: RNCC: 5 | RNVC: 2
22210 24001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-1341
Nonmetallic Bumper

123061341
43762-004: RNCC: 3 | RNVC: 2
43 762-004: RNCC: 5 | RNVC: 9

30 Jan 1986

5340-12-164-3029
Spring Tension Clip

121643029
23290-033010.002: RNCC: 2 | RNVC: 2
23290-033010.002: RNCC: 3 | RNVC: 2
23290-033010.002: RNCC: 5 | RNVC: 9
23290-033010-002: RNCC: 5 | RNVC: 9
23290-033010.002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-156-0396
Helical Compression Spring Seat

121560396
167495102: RNCC: 3 | RNVC: 2
7101-72-50-11: RNCC: 5 | RNVC: 2
7101-72-50.11: RNCC: 5 | RNVC: 2
7101-72-50-11: RNCC: 5 | RNVC: 9
7101-72-50.11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-2147
Rod End Connector

127012147
VG95211-ML-127012147: RNCC: 2 | RNVC: 2
5.12.0605.0340.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-8569
Threaded End Tensioning Tie Rod

127008569
VG95211-ML-127008569: RNCC: 2 | RNVC: 2
155N1218-20-1,5-370: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-319-6467
Double Angle Bracket

123196467
P-296885-424: RNCC: 3 | RNVC: 2
P296885-424: RNCC: 5 | RNVC: 2

20 Oct 1989

5340-12-306-0792
Mending Plate

123060792
P-244572-751: RNCC: 3 | RNVC: 2
P244572-751: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-321-2508
Mounting Bracket

123212508
2300158-031: RNCC: 3 | RNVC: 2
2300158-031: RNCC: 5 | RNVC: 9

24 Apr 1990

5340-12-361-6386
Nonmetallic Bumper

123616386
81962105028: RNCC: 3 | RNVC: 2
81.96210-5028: RNCC: 5 | RNVC: 2

28 Oct 2003

5340-12-391-0427
Friction Catch Stud Receptacle

123910427
DIN6310-60: RNCC: 2 | RNVC: 2

17 Jan 2013

5340-12-320-4225
Spring Tension Clip

123204225
KLS20-20: RNCC: 3 | RNVC: 2
02536987EZ5016-75: RNCC: 5 | RNVC: 2
02536987: RNCC: 5 | RNVC: 2

12 Jan 1990

5340-12-304-2171
Angle Bracket

123042171
1300392-100000.004: RNCC: 2 | RNVC: 2
279.990237: RNCC: 3 | RNVC: 2
279.990237: RNCC: 5 | RNVC: 9
279.990237: RNCC: 5 | RNVC: 9

26 Jun 1985

5340-12-329-6646
Loop Clamp

123296646
DIN3015-LD-0R-12-PP-W1: RNCC: 2 | RNVC: 2
SM112PP-DP-AS: RNCC: 3 | RNVC: 2
RAPR12-012: RNCC: 3 | RNVC: 2
SM112DP-AS: RNCC: 3 | RNVC: 2
RAPR12-012: RNCC: 5 | RNVC: 2

16 Sep 1992

5340-12-338-0610
Door Handle

123380610
01.30225-01088.00.3: RNCC: 3 | RNVC: 2
01.30225-01080.13.3: RNCC: 5 | RNVC: 2

17 May 1995

5340-12-306-2451
Mending Plate

123062451
47718-001: RNCC: 3 | RNVC: 2
47 718-001: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-12-307-7466
Retaining Strap

123077466
R51021: RNCC: 3 | RNVC: 9
2033-358: RNCC: 3 | RNVC: 9
2033E-358-R51021: RNCC: 5 | RNVC: 9

22 Jul 1986

5340-12-324-4001
Resilient Mount

123244001
25697-04040: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-12-388-7714
Double Angle Bracket

123887714
601243-201240.01: RNCC: 2 | RNVC: 2
601243-201240.01: RNCC: 3 | RNVC: 2

20 Apr 2012

5340-12-301-1975
Nonmetallic Bumper

123011975
VG75073-GUMMIPLATTE: RNCC: 2 | RNVC: 2
98602401: RNCC: 3 | RNVC: 2
VG75073-GUMMIPLATTE: RNCC: 3 | RNVC: 2
6020366: RNCC: 3 | RNVC: 2
704226277: RNCC: 5 | RNVC: 2
602A004: RNCC: 5 | RNVC: 2
TK-BA35-5340-426: RNCC: 5 | RNVC: 9

27 Sep 1984

5340-12-363-9070
Angle Bracket

123639070
J92226428-005: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-318-5795
Spring Tension Clip

123185795
281807405: RNCC: 3 | RNVC: 2
81.91320.0057: RNCC: 5 | RNVC: 2
81913200057: RNCC: 5 | RNVC: 2

28 Jul 1989

5340-12-182-1079
Spring Loaded Cylinder Fastener

121821079
600770: RNCC: 3 | RNVC: 2

14 Jan 1980

5340-12-317-4198
Angle Bracket

123174198
P-145502-022: RNCC: 3 | RNVC: 2
P145502-022: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-307-2459
Mending Plate

123072459
RP988663: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-146-8489
Loop Clamp

121468489
DIN3016-1-D2-10-10X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-10-10X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.2X10/15: RNCC: 3 | RNVC: 2
4219215010: RNCC: 5 | RNVC: 2
RSGU1100-2X10-15: RNCC: 5 | RNVC: 2
RSGU1100.2X10/15: RNCC: 5 | RNVC: 2
DIN3016-D2-10-10X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-7251
Manual Control Handle

123657251
5802017-708740.02: RNCC: 2 | RNVC: 2
5802017-708740.02: RNCC: 3 | RNVC: 2

27 Jan 2005

5340-12-313-0883
Mounting Bracket

123130883
CH11624: RNCC: 3 | RNVC: 2
4284-120.03: RNCC: 5 | RNVC: 2
CH11624: RNCC: 5 | RNVC: 9
4284-120.03: RNCC: 5 | RNVC: 9

3 Mar 1988

5340-12-332-7390
Plug Button

123327390
0620163: RNCC: 3 | RNVC: 2
0620 163: RNCC: 5 | RNVC: 2
0620.163: RNCC: 5 | RNVC: 2
0620163: RNCC: 5 | RNVC: 9

14 Sep 1993

5340-12-350-5919
Support Hook

123505919
160-88355-08: RNCC: 3 | RNVC: 2
160-88355-08: RNCC: 5 | RNVC: 9

18 Apr 2000

5340-12-377-3733
Mechanical Stop

123773733
314152: RNCC: 3 | RNVC: 2
5283-05-10-01/37: RNCC: 5 | RNVC: 2

13 Jan 2009

5340-12-333-0545
Loop Clamp

123330545
U100-3611-001: RNCC: 2 | RNVC: 2
U100-3611-001: RNCC: 3 | RNVC: 2

25 Oct 1993

5340-12-383-9632
Webbing Strap

123839632
2300002-151000.103: RNCC: 2 | RNVC: 2
2300002-151000.103: RNCC: 3 | RNVC: 2
2300002-151000.103: RNCC: 5 | RNVC: 9

29 Dec 2010

5340-12-347-6020
Mounting Bracket

123476020
8854 130-101: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-167-6103
Clamping Catch

121676103
PAN5109-17: RNCC: 3 | RNVC: 2

5 Jan 1977

5340-12-317-6093
Mounting Bracket

123176093
1000192-00 0 01710: RNCC: 2 | RNVC: 2
1000192-00 0 01710: RNCC: 3 | RNVC: 2
1000192-00 0 01710: RNCC: 5 | RNVC: 9
10003-00 0 01 10: RNCC: 5 | RNVC: 9
10003-00 0 01 10: RNCC: 5 | RNVC: 9

21 Apr 1989

5340-12-382-4854
Snap Hook

123824854
DIN5299-E-60-A2: RNCC: 2 | RNVC: 2

28 Jun 2010

5340-12-318-1289
Mounting Bracket

123181289
5600023-190195.000.0: RNCC: 2 | RNVC: 2
22013.0.03.341.00: RNCC: 3 | RNVC: 2
5600023-190195.000.0: RNCC: 3 | RNVC: 2
1271684: RNCC: 5 | RNVC: 2
22013.0.03.341.00: RNCC: 5 | RNVC: 9

14 Jun 1989

5340-12-364-3922
Nut And Bolt Retainer

123643922
5981-186340.001.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-356-5152
Flange Protector

123565152
35618-01: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-313-0166
Mending Plate

123130166
P-086147-019: RNCC: 3 | RNVC: 2
P086147-019: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-354-1545
Rim Latch

123541545
J52422522-001: RNCC: 3 | RNVC: 2

12 Jun 2001

5340-12-198-1095
Metal Runner

121981095
5801999-171100.00: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-12-386-4650
Permanent Magnet

123864650
009-098.122-003: RNCC: 3 | RNVC: 2

2 Sep 2011

5340-12-327-8332
Ball Socket Seat

123278332
350-401-002: RNCC: 3 | RNVC: 2

11 Mar 1992

5340-12-171-6315
Loop Clamp

121716315
06.67840-0115: RNCC: 3 | RNVC: 2
06.67840-0115: RNCC: 5 | RNVC: 2
MAN194 A20: RNCC: 5 | RNVC: 2
06678400115: RNCC: 5 | RNVC: 2
A20MAN194: RNCC: 5 | RNVC: 9

28 Oct 1977

5340-12-321-9380
Multiple Angle Bracket

123219380
C249-A32-B56: RNCC: 2 | RNVC: 2
C249-A32-B56: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-310-1093
Electrical-Mechanical Equipment Post

123101093
1300252-111.02: RNCC: 2 | RNVC: 2
774-015-23: RNCC: 3 | RNVC: 2

7 Apr 1987

5340-12-330-9264
Access Cover

123309264
2718-000600.000.0: RNCC: 2 | RNVC: 2
2718-000600.000.0: RNCC: 3 | RNVC: 2

26 Feb 1993

5340-12-196-9024
Angle Bracket

121969024
A-295088-401: RNCC: 3 | RNVC: 2
A295088-401: RNCC: 5 | RNVC: 2

30 Aug 1983

5340-12-308-8786
Nonmetallic Bumper

123088786
DIN95364-A20X12-NR60ST-M6X10: RNCC: 2 | RNVC: 2
81130-20X12-M6X10.NR60.ST: RNCC: 5 | RNVC: 2
3018055-60SHORE: RNCC: 5 | RNVC: 2
1.20.12.4.60NR/ST: RNCC: 5 | RNVC: 2
811.030.020.012.06X10.NR60.ST: RNCC: 5 | RNVC: 2
3018055/11MN60: RNCC: 5 | RNVC: 2
25008501: RNCC: 5 | RNVC: 2
VG95364-A20X12-M6X10-NR60ST: RNCC: 5 | RNVC: 9
VG95364-A20X12-NR60ST-M6X10: RNCC: 5 | RNVC: 9

25 Nov 1986

5340-12-186-2343
Electrical-Mechanical Equipment Post

121862343
150 830: RNCC: 3 | RNVC: 2
150830: RNCC: 5 | RNVC: 2
3-121-KHD: RNCC: 5 | RNVC: 2

6 Dec 1980

5340-12-344-2328
Mounting Plate

123442328
2.72-10303: RNCC: 3 | RNVC: 2
2-72-10303: RNCC: 5 | RNVC: 2

2 Oct 1997

5340-12-161-0063
Nut And Bolt Locking Plate

121610063
100355-165000.25: RNCC: 2 | RNVC: 2
100355-165000.25: RNCC: 3 | RNVC: 2
100355-165000-25: RNCC: 5 | RNVC: 2
100355-165000-25: RNCC: 5 | RNVC: 9
100355-165000-25: RNCC: 5 | RNVC: 9
100355-165000.25: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-7434
Mending Plate

123087434
1281-12100.10: RNCC: 2 | RNVC: 2
159135: RNCC: 3 | RNVC: 2
1281-12100.10: RNCC: 5 | RNVC: 2

13 Nov 1986

5340-12-352-6316
Webbing Strap

123526316
8310-0003: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-134-6390
Door Handle

121346390
C51VG75111: RNCC: 2 | RNVC: 2
9G: RNCC: 3 | RNVC: 2
C51VDA75111: RNCC: 5 | RNVC: 2
2512-36-25: RNCC: 5 | RNVC: 2
2512-36-25: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-362-6942
Mechanical Stop

123626942
5055-025105A00C: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-176-6636
Catch Strike

121766636
51-6861-615-05: RNCC: 3 | RNVC: 2

11 Dec 1978

5340-12-326-4643
Access Cover

123264643
2300061-053180: RNCC: 2 | RNVC: 2
9840418: RNCC: 3 | RNVC: 9
2300061-053180: RNCC: 5 | RNVC: 9

19 Sep 1991

5340-12-327-5106
Webbing Strap

123275106
5802291-20651: RNCC: 2 | RNVC: 2
5802291-20651: RNCC: 3 | RNVC: 2
4840541-20651: RNCC: 5 | RNVC: 2
000-A2-25X2,0X740-PE-RAL6031: RNCC: 6 | RNVC: 9

29 Jan 1992

5340-12-314-0986
Flush Catch Claw

123140986
80100074: RNCC: 3 | RNVC: 2
80100 074: RNCC: 5 | RNVC: 2
80100-074: RNCC: 5 | RNVC: 2
331123005: RNCC: 5 | RNVC: 2

7 Jun 1988

5340-12-358-5897
Angle Bracket

123585897
J92228259-003: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-326-8455
Mending Plate

123268455
6600133-111103.03: RNCC: 2 | RNVC: 2
6600133-111103.03: RNCC: 3 | RNVC: 2

4 Nov 1991

5340-12-334-2750
Dashpot

123342750
142344: RNCC: 3 | RNVC: 2
03-08-250-111KLDL: RNCC: 5 | RNVC: 2

20 Apr 1994

5340-12-389-0578
Mounting Plate

123890578
1187195: RNCC: 3 | RNVC: 2
H1.1784-47-01-00.00-07: RNCC: 5 | RNVC: 2

23 May 2012

5340-12-198-7583
Escutcheon Plate

121987583
1000042-132110.15: RNCC: 3 | RNVC: 2
1000042-132110-15: RNCC: 5 | RNVC: 2
1000042-132110.15: RNCC: 5 | RNVC: 9

23 Feb 1984

5340-12-353-3927
Mounting Bracket

123533927
VG95211-ML-123533927: RNCC: 2 | RNVC: 2
GA67075: RNCC: 3 | RNVC: 2

19 Mar 2001

5340-12-700-6583
Buckle

127006583
VG95211-ML-127006583: RNCC: 2 | RNVC: 2
726703500: RNCC: 3 | RNVC: 2
0502540058469: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-188-6894
Electrical-Mechanical Equipment Post

121886894
VG95148B5,5XM3X20-ST: RNCC: 2 | RNVC: 2
C74451-A1574-C5: RNCC: 3 | RNVC: 2
VG95148B5,5XM3X20-ST: RNCC: 3 | RNVC: 2
5.03.201: RNCC: 3 | RNVC: 2
ENMET16-20: RNCC: 3 | RNVC: 2
5-03-201: RNCC: 5 | RNVC: 2
18H282: RNCC: 5 | RNVC: 2

23 Jul 1981

5340-12-701-2471
Mounting Bracket

127012471
VG95211-ML-127012471: RNCC: 2 | RNVC: 2
5.12.3600.1030.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-354-3891
Double Angle Bracket

123543891
J53230660-013: RNCC: 3 | RNVC: 2

6 Jul 2001

5340-12-366-4891
Rod End Clevis

123664891
941316977: RNCC: 3 | RNVC: 2
1139-430.09.00.046-001: RNCC: 5 | RNVC: 2

28 Apr 2005

5340-12-182-6287
Webbing Strap

121826287
5802017-708910.00: RNCC: 2 | RNVC: 2
5802017-708910.00: RNCC: 3 | RNVC: 2
C 7000 113: RNCC: 5 | RNVC: 2
C7000113: RNCC: 5 | RNVC: 2
C7000113: RNCC: 5 | RNVC: 2
C 7000 113: RNCC: 5 | RNVC: 2
5800043-3810.00: RNCC: 5 | RNVC: 9
5802017-708910.00: RNCC: 5 | RNVC: 9
5800043-3810.00: RNCC: 5 | RNVC: 9
5800043-3810: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-12-302-1589
Electrical-Mechanical Equipment Post

123021589
VG95148B5,5XM2X15-2.0402.30GALNI: RNCC: 3 | RNVC: 2
8.8701.00-04-10-AUSF.1: RNCC: 3 | RNVC: 2
8.8701.00-04-10-AUSF1: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-149-4652
Retaining Strap

121494652
1216 8437: RNCC: 3 | RNVC: 2
12168437: RNCC: 5 | RNVC: 9
6-420-0-977-019-4: RNCC: 5 | RNVC: 9
6.420.0.977.019.4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-176-4527
Butt Hinge Leaf

121764527
00009052016: RNCC: 3 | RNVC: 2
81.97201-6033: RNCC: 5 | RNVC: 2
81972016033: RNCC: 5 | RNVC: 2

29 Nov 1978

5340-12-198-1429
Angle Bracket

121981429
5800043-1200.02: RNCC: 2 | RNVC: 2
5800043-1200.02: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-164-1261
Eye Hook

121641261
160-24943-03: RNCC: 3 | RNVC: 2
160-24943-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-192-9967
Pad Eye

121929967
7100036-000.06: RNCC: 2 | RNVC: 2
7100036-000.06: RNCC: 3 | RNVC: 2
7100036-000.06: RNCC: 3 | RNVC: 2
7100036-000.06: RNCC: 3 | RNVC: 2
7100036-000.06: RNCC: 5 | RNVC: 9

9 Jun 1982

5340-12-196-8496
Access Cover

121968496
588.70-100011-001: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-12-317-3688
Headless Straight Rod

123173688
00401-038-000: RNCC: 3 | RNVC: 2
401-38: RNCC: 5 | RNVC: 9

3 Apr 1989

5340-12-344-4997
Dust And Moisture Seal Protective Plug

123444997
88960020072: RNCC: 3 | RNVC: 2
88.96002-0072: RNCC: 5 | RNVC: 2
10 168: RNCC: 5 | RNVC: 9
KB168: RNCC: 5 | RNVC: 9

4 Nov 1997

5340-12-345-5050
Access Cover

123455050
9892144: RNCC: 3 | RNVC: 9
463-630317.000: RNCC: 5 | RNVC: 9

25 Mar 1998

5340-12-146-8692
Loop Clamp

121468692
12C: RNCC: 3 | RNVC: 2
5800583-096190.124: RNCC: 5 | RNVC: 2
25704-350000T181: RNCC: 5 | RNVC: 2
12CFBN18102N2501: RNCC: 5 | RNVC: 2
211-15120: RNCC: 5 | RNVC: 2
25704-350000T181: RNCC: 5 | RNVC: 9
202009901: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-363-8475
Mounting Bracket

123638475
J28230100-403: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-366-2358
Mounting Bracket

123662358
5803924-300100.00: RNCC: 2 | RNVC: 2
7802982310: RNCC: 3 | RNVC: 2
5803924-300100.00: RNCC: 5 | RNVC: 2

24 Mar 2005

5340-12-318-0018
Angle Bracket

123180018
81513010029: RNCC: 3 | RNVC: 2
81.51301.0029: RNCC: 5 | RNVC: 2

2 Jun 1989

5340-12-388-7606
Dust And Moisture Seal Protective Cap

123887606
223157: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-193-8730
Mending Plate

121938730
5548227: RNCC: 3 | RNVC: 2
554.8227: RNCC: 5 | RNVC: 2

8 Sep 1982

5340-12-173-3550
Rod End Clevis

121733550
01TL30161: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-12-198-4684
Butt Hinge

121984684
LN9172KGG: RNCC: 2 | RNVC: 2
LN9172GGK: RNCC: 5 | RNVC: 9

31 Jan 1984

5340-12-384-6920
Rigid Caster

123846920
71305290: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-12-179-7605
Angle Bracket

121797605
81429402091: RNCC: 3 | RNVC: 2
81.42940.2091: RNCC: 5 | RNVC: 2

30 Jul 1979

5340-12-380-4702
Angle Bracket

123804702
X00032706: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-376-9033
Kappe

123769033
45610 KAPPE RECHTS: RNCC: 3 | RNVC: 2

20 Nov 2008

5340-12-318-3264
Access Cover

123183264
6600015-78.002: RNCC: 3 | RNVC: 2
6600015-78.002: RNCC: 5 | RNVC: 9

30 Jun 1989

5340-12-149-0925
Retaining Strap

121490925
121G10018E1: RNCC: 3 | RNVC: 2
121G10018: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-322-0246
Mounting Bracket

123220246
0224 5953: RNCC: 3 | RNVC: 2
2245953ED0150-56: RNCC: 5 | RNVC: 2
89233153: RNCC: 5 | RNVC: 2

18 Jul 1990

5340-12-313-4630
Electrical-Mechanical Equipment Post

123134630
2300279-9800.40: RNCC: 2 | RNVC: 2
2300279-9800.40: RNCC: 3 | RNVC: 2
2300279-9800.40: RNCC: 5 | RNVC: 9
9871390: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-327-3761
Double Angle Bracket

123273761
8402008002: RNCC: 3 | RNVC: 2
84020 08002 Z45A: RNCC: 5 | RNVC: 2
84020 08002: RNCC: 5 | RNVC: 9

16 Jan 1992

5340-12-366-9503
Lock-Release Lever

123669503
4257500293: RNCC: 3 | RNVC: 2
4257500293: RNCC: 5 | RNVC: 2

23 Jun 2005

5340-12-387-9301
Dust And Moisture Seal Protective Plug

123879301
7093875: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-338-8646
Access Cover

123388646
AZ8104G025: RNCC: 2 | RNVC: 2
AZ8104G025: RNCC: 3 | RNVC: 2
5340123388646: RNCC: 5 | RNVC: 2
AZ8104G025: RNCC: 5 | RNVC: 9
AZ8104G025ST: RNCC: 5 | RNVC: 9

1 Sep 1995

5340-12-302-1359
Webbing Strap

123021359
5802017-708204.00: RNCC: 2 | RNVC: 2
5802017-708204.00: RNCC: 3 | RNVC: 2
5802017-708204.00: RNCC: 3 | RNVC: 2
5802017-708204.00: RNCC: 5 | RNVC: 9
5802017-708204.00: RNCC: 5 | RNVC: 9

6 Dec 1984

5340-12-373-4818
Pipe Hanger

123734818
44-58878: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-12-134-8194

5340-12-040-1144

5340-12-156-3556

5340-12-701-7859
Mounting Bracket

127017859
VG95211-ML-127017859: RNCC: 2 | RNVC: 2
5.12.7803.8010.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-155-3629
Rod End Clevis

121553629
160-41615-02: RNCC: 3 | RNVC: 2
160-41615-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-1496
Spannversch Halter

123651496
2500255-190026.001.0: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-333-4575
Protection Bellows

123334575
V6-407: RNCC: 3 | RNVC: 2
V6-407: RNCC: 5 | RNVC: 2
V6-407: RNCC: 5 | RNVC: 2

17 Dec 1993

5340-12-359-4375
Loop Clamp

123594375
DIN3016-1-D2-10-10X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-330-3923
Pipe Hanger

123303923
NO PRIMARY REF 12-330-3923: RNCC: 3 | RNVC: 2
73570300: RNCC: 5 | RNVC: 2
VG84788-100: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-12-374-5371
Retaining Strap

123745371
2300014-208007.00.0: RNCC: 2 | RNVC: 2
2300014-208007.00.0: RNCC: 3 | RNVC: 2

25 Feb 2008

5340-12-359-8147
Mechanical Stop

123598147
2500261-186000.007.0: RNCC: 2 | RNVC: 2
2500261-186000.007.0: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-12-328-9319
Protection Bellows

123289319
03.3303.9200.1: RNCC: 3 | RNVC: 2
3.3303.9200.1: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-12-379-2968
Casement Fastener

123792968
4500-2-ST: RNCC: 3 | RNVC: 2

10 Jul 2009

5340-12-330-4729
Webbing Strap

123304729
0853 0230.070: RNCC: 3 | RNVC: 2
8530230.070: RNCC: 5 | RNVC: 2
NYLONBAND18MMBR,1,5DICK,250LG: RNCC: 5 | RNVC: 2

18 Dec 1992

5340-12-198-5498
Mending Plate

121985498
CF 328 631 -X: RNCC: 3 | RNVC: 2
CF32863 10X: RNCC: 5 | RNVC: 2
CF 328 631 -X: RNCC: 5 | RNVC: 2
CF 328 631 -X: RNCC: 5 | RNVC: 2
CF3286310X: RNCC: 5 | RNVC: 2
CF32863 10X: RNCC: 5 | RNVC: 2

8 Feb 1984

5340-12-168-2379
Mending Plate

121682379
WW410673A: RNCC: 3 | RNVC: 2
WW410673A: RNCC: 5 | RNVC: 2
WW 410 673 A: RNCC: 5 | RNVC: 2
WW410673A: RNCC: 5 | RNVC: 2

28 Feb 1977

5340-12-702-4203
Retaining Bail

127024203
VG95211-ML-127024203: RNCC: 2 | RNVC: 2
5.12.7070.1490.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-175-8003
Butt Hinge Leaf

121758003
CF311593A: RNCC: 3 | RNVC: 2
536056-0550.000: RNCC: 3 | RNVC: 2
CF 311 593 A: RNCC: 5 | RNVC: 2
CF311593A: RNCC: 5 | RNVC: 2
CF 311 593 A: RNCC: 5 | RNVC: 2
CF 311 593 A: RNCC: 5 | RNVC: 2
CF311593A: RNCC: 5 | RNVC: 2
536056-0550.000: RNCC: 5 | RNVC: 9

18 Oct 1978

5340-12-144-2673
Schraubbuchse

121442673
30-108P7-75: RNCC: 3 | RNVC: 2
30-108-7-75: RNCC: 5 | RNVC: 2
511086775: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-178-0135
Multiple Angle Bracket

121780135
NO PRIMARY REF 12-178-0135: RNCC: 3 | RNVC: 2
81619410065: RNCC: 5 | RNVC: 2
81.61941.0065: RNCC: 5 | RNVC: 2
23230-227600-020-0: RNCC: 5 | RNVC: 9
23230-227600.020.0: RNCC: 5 | RNVC: 9

14 Mar 1979

5340-12-197-7001
Double Angle Bracket

121977001
A-296833-405: RNCC: 3 | RNVC: 2
A296833-405: RNCC: 5 | RNVC: 2

15 Nov 1983

5340-12-357-0562
Multiple Angle Bracket

123570562
2500261-030110.000.0: RNCC: 2 | RNVC: 2
2500261-030110.000.0: RNCC: 3 | RNVC: 2

29 Apr 2002

5340-12-317-3234
Angle Bracket

123173234
4900064-41226.002: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-182-5725
Electrical-Mechanical Equipment Post

121825725
C145-A5-C122: RNCC: 2 | RNVC: 2
C145A5C122: RNCC: 3 | RNVC: 2
C145-A5-C122: RNCC: 5 | RNVC: 2
C145-A5-C122: RNCC: 5 | RNVC: 2
C145A5C122: RNCC: 5 | RNVC: 2

12 Feb 1980

5340-12-321-5784
Mending Plate

123215784
5803463-300-00: RNCC: 2 | RNVC: 2
FE97-300-00: RNCC: 3 | RNVC: 2
5803463-300-00: RNCC: 5 | RNVC: 2

5 Jun 1990

5340-12-159-3217
Electrical-Mechanical Equipment Post

121593217
VG95148C5,5XM3X12-NRST: RNCC: 2 | RNVC: 2
H61550-C3120-R865: RNCC: 3 | RNVC: 2
VG95148C5,5XM3X12-NRST: RNCC: 3 | RNVC: 2
2137-116207: RNCC: 5 | RNVC: 2
2137E116207-00: RNCC: 5 | RNVC: 2
SN61550-CM3X12-A2-70: RNCC: 5 | RNVC: 2
1392253-050295-003: RNCC: 5 | RNVC: 9
1392253-050295.003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-324-8514
Lock-Release Lever

123248514
06460-3103X20: RNCC: 3 | RNVC: 2
0231002003: RNCC: 3 | RNVC: 2
150.620: RNCC: 5 | RNVC: 2
NLM646-3103X20: RNCC: 5 | RNVC: 9
NLM6460-3103X20: RNCC: 5 | RNVC: 9

27 Mar 1991

5340-12-310-3977
Mending Plate

123103977
2300033-850100.02: RNCC: 2 | RNVC: 2
2300033-850100.02: RNCC: 5 | RNVC: 9
2300033-850100-02: RNCC: 5 | RNVC: 9

19 May 1987

5340-12-188-7754
Webbing Strap

121887754
5801479-3252: RNCC: 2 | RNVC: 2
5801479-3252: RNCC: 3 | RNVC: 2
5801479-3252: RNCC: 3 | RNVC: 2
5801479-3252: RNCC: 5 | RNVC: 9
5801479-3252: RNCC: 5 | RNVC: 9
000-F5-25X2,0X650-PE-RAL6031: RNCC: 6 | RNVC: 9

29 Jul 1981

5340-12-184-8335
Angle Bracket

121848335
5801505-3118-002: RNCC: 3 | RNVC: 2
5801505-3118.002: RNCC: 5 | RNVC: 2

21 Aug 1980

5340-12-702-4989
Mounting Bracket

127024989
VG95211-ML-127024989: RNCC: 2 | RNVC: 2
5.51.5811.0410.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-389-5103
Loop Clamp

123895103
DIN3016-1-D1-6X12-W4-EPDM: RNCC: 2 | RNVC: 2
06673000610: RNCC: 5 | RNVC: 2
06.67300-0610: RNCC: 5 | RNVC: 2

16 Jul 2012

5340-12-702-4563
Mounting Bracket

127024563
VG95211-ML-127024563: RNCC: 2 | RNVC: 2
5.51.0603.0001.01: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-387-6659
Catch Strike

123876659
9999075-400180.002.0: RNCC: 3 | RNVC: 2

23 Jan 2012

5340-12-177-0672
Mounting Bracket

121770672
5800823-55-004: RNCC: 3 | RNVC: 2
5800823-55.004: RNCC: 5 | RNVC: 2

12 Jan 1979

5340-12-378-2784
Loop Clamp

123782784
DIN3016-1-D1-9X15-W1-2-NBR: RNCC: 2 | RNVC: 2

25 Mar 2009

5340-12-320-9933
Catch Strike

123209933
P-888541-001: RNCC: 3 | RNVC: 2
P888541-001: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-12-358-9615
Angle Bracket

123589615
2300186-188230.001: RNCC: 2 | RNVC: 2
2300186-188230.001: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-155-5720
Ring

121555720
VG95211-ML-121555720: RNCC: 2 | RNVC: 2
160-71612-06: RNCC: 3 | RNVC: 2
160-71612-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-159-7873
Webbing Strap

121597873
5801216-0600: RNCC: 2 | RNVC: 2
5801216-0600: RNCC: 3 | RNVC: 2
5801216-0600: RNCC: 5 | RNVC: 2
5801216-0600: RNCC: 5 | RNVC: 9
5801216-0600: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-9800
Handle Grip

123229800
198 7117 00: RNCC: 3 | RNVC: 2
PH80-19: RNCC: 5 | RNVC: 2
198711700: RNCC: 5 | RNVC: 2

15 Oct 1990

5340-12-354-8212
Retaining Strap

123548212
J28230187-401: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-349-7495
Angle Bracket

123497495
FAST-202090.02: RNCC: 2 | RNVC: 2
FAST-202090.02: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-314-0545
Loop Clamp

123140545
GM90204-48: RNCC: 3 | RNVC: 2

2 Jun 1988

5340-12-304-0665
Dust And Moisture Seal Protective Cap

123040665
2224524703: RNCC: 3 | RNVC: 2
22245 24703: RNCC: 5 | RNVC: 2
5801369-0095.002: RNCC: 5 | RNVC: 2
5801369-0095.002: RNCC: 5 | RNVC: 9

7 Jun 1985

5340-12-314-6687
Angle Bracket

123146687
512214-0412.000: RNCC: 3 | RNVC: 2
512214-0412: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-314-2833
Mounting Bracket

123142833
43 656-001: RNCC: 2 | RNVC: 2
43656-001: RNCC: 3 | RNVC: 2
43 656-001: RNCC: 5 | RNVC: 9

23 Jun 1988

5340-12-321-0681
Nonmetallic Bumper

123210681
12791-420000.001: RNCC: 2 | RNVC: 2
009-039.420-001: RNCC: 3 | RNVC: 2
009-039-420-001: RNCC: 5 | RNVC: 2
12791-420000.001: RNCC: 5 | RNVC: 9

22 Mar 1990

5340-12-179-5470
Angle Bracket

121795470
C280-A9-C122: RNCC: 2 | RNVC: 2
C280A9C122: RNCC: 3 | RNVC: 2
C280A9C122: RNCC: 5 | RNVC: 2
C280-A9-C122: RNCC: 5 | RNVC: 2
C280-A9-C122: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-162-5671
Double Angle Bracket

121625671
8469838: RNCC: 3 | RNVC: 2
8082290: RNCC: 5 | RNVC: 2
8082-290: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-355-5336
Nonmetallic Bumper

123555336
2125-129511A03B: RNCC: 2 | RNVC: 2
2125-129511A03B: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-155-4763
Nonmetallic Bumper

121554763
160-73105-08: RNCC: 3 | RNVC: 2
160-73105-08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-168-0088
Retaining Strap

121680088
61114-042000.05.0: RNCC: 2 | RNVC: 2
61114-042000.05.0: RNCC: 3 | RNVC: 2
61114-042000-05-0: RNCC: 5 | RNVC: 2
61114-042000-05-0: RNCC: 5 | RNVC: 9
61114-042000.05.0: RNCC: 5 | RNVC: 9

9 Feb 1977

5340-12-300-7916
Webbing Strap

123007916
5802287-3010.00: RNCC: 2 | RNVC: 2
7802028310: RNCC: 3 | RNVC: 2
78020 28310: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-316-8046
Shimmy Damper

123168046
16-4-01360: RNCC: 3 | RNVC: 2
16-4-353-300-X-X-140VM10456: RNCC: 5 | RNVC: 2

14 Feb 1989

5340-12-166-5134
Angle Bracket

121665134
2300007-189380.01.0: RNCC: 2 | RNVC: 2
2300007-189380.01.0: RNCC: 3 | RNVC: 2
2300007-189380.01.0: RNCC: 5 | RNVC: 2
2300007-189380-01-0: RNCC: 5 | RNVC: 9
2300007-189380.01.0: RNCC: 5 | RNVC: 9

16 Sep 1976

5340-12-165-7706
Resilient Mount

121657706
DIN95363-A18X8,5-M6X16-NR55ST: RNCC: 2 | RNVC: 2
57810400015: RNCC: 5 | RNVC: 2
781040-60SHORE: RNCC: 5 | RNVC: 2
781040MITTEL: RNCC: 5 | RNVC: 2
500019-M6X16.NR55.ST: RNCC: 5 | RNVC: 2
VG95363-A18X8,5-M6X16-NR55ST: RNCC: 5 | RNVC: 9

24 Jun 1976

5340-12-301-2063
Angle Bracket

123012063
A-295049-401: RNCC: 3 | RNVC: 2
A295049-401: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-139-7224
Nonmetallic Bumper

121397224
DIN95364-A40X15-M10X25-NR55ST: RNCC: 2 | RNVC: 2
V5/40 55 SHORE A: RNCC: 5 | RNVC: 2
V5-40: RNCC: 5 | RNVC: 2
V5-40: RNCC: 5 | RNVC: 2
530047-M10X25.NR55.ST: RNCC: 5 | RNVC: 2
V5-40: RNCC: 5 | RNVC: 2
VG95364-A40X15-M10X25-NR55ST: RNCC: 5 | RNVC: 9
V5-40A4450: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-0210
Resilient Mount

121970210
1204000001: RNCC: 3 | RNVC: 2
UMA233/921SONDERAUSFUEHRUNG-M16: RNCC: 5 | RNVC: 2
UMA,233/921,SONDERAUSF-M16,U20SO: RNCC: 5 | RNVC: 2
0021-3200-750: RNCC: 5 | RNVC: 2
UMA233/921SONDERAUSF-M16, U20SO: RNCC: 5 | RNVC: 9
0021-3200-750: RNCC: 5 | RNVC: 9
U20SO: RNCC: 5 | RNVC: 9
U 20 SO: RNCC: 5 | RNVC: 9

12 Sep 1983

5340-12-183-5816
Access Cover

121835816
CF 205 360 -X: RNCC: 2 | RNVC: 2
CF 205 360 AX: RNCC: 2 | RNVC: 2
CF 205 360 AX: RNCC: 3 | RNVC: 2
CF 205 360 -X: RNCC: 5 | RNVC: 2
CF 205 360 AX: RNCC: 5 | RNVC: 2
CF2053600X: RNCC: 5 | RNVC: 2
CF 205 360 -X: RNCC: 5 | RNVC: 2
CF2053600X: RNCC: 5 | RNVC: 2
CF2053600X: RNCC: 5 | RNVC: 2
CF 205 360 AX: RNCC: 5 | RNVC: 2

3 May 1980

5340-12-371-3443
Mounting Bracket

123713443
2 0000-172: RNCC: 3 | RNVC: 2
2 0000-172: RNCC: 5 | RNVC: 2

19 Mar 2007

5340-12-358-2030
Metallic Bumper

123582030
2500262-000200.002.0: RNCC: 2 | RNVC: 2
2500262-000200.002.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-701-6873
Mounting Plate

127016873
VG95211-ML-127016873: RNCC: 2 | RNVC: 2
5.12.7220.2220.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-2866
Detent Plunger

121872866
M10-67-112-30-1: RNCC: 3 | RNVC: 2
M10-67-112-30-1: RNCC: 5 | RNVC: 9

26 Mar 1981

5340-12-195-8772
Angle Bracket

121958772
1246-44.3.1: RNCC: 2 | RNVC: 2
1246-44.3.1: RNCC: 3 | RNVC: 2
1246-44-3-1: RNCC: 5 | RNVC: 2
128692: RNCC: 5 | RNVC: 2
1246-44.3.1: RNCC: 5 | RNVC: 9

26 Apr 1983

5340-12-303-5946
Electrical-Mechanical Equipment Post

123035946
VG95148C5XM3X6-ST: RNCC: 2 | RNVC: 2
VG95148C5XM3X6-ST: RNCC: 3 | RNVC: 2
402.01-3039.4: RNCC: 3 | RNVC: 2

11 Apr 1985

5340-12-703-3126
Rod End Connector

127033126
VG95211-ML-127033126: RNCC: 2 | RNVC: 2
5.12.4901.3641.98: RNCC: 3 | RNVC: 2

3 Apr 2000

5340-12-198-1443
Angle Bracket

121981443
5801999-390000.02: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-313-0882
Mounting Bracket

123130882
CH11623: RNCC: 3 | RNVC: 2
4284-120.02: RNCC: 5 | RNVC: 2
CH11623: RNCC: 5 | RNVC: 9
4284-120.02: RNCC: 5 | RNVC: 9

3 Mar 1988

5340-12-379-2683
Manual Control Lever

123792683
9999164-970220.000: RNCC: 3 | RNVC: 2

9 Jul 2009

5340-12-357-6204
Spacing Threaded Standoff

123576204
588.91-130000-005: RNCC: 2 | RNVC: 2
588.91-130000-005: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-315-0233
Mending Plate

123150233
E4782-01-68: RNCC: 3 | RNVC: 2

8 Sep 1988

5340-12-161-9615
Angle Bracket

121619615
100332-014030.03: RNCC: 2 | RNVC: 2
100332-014030.03: RNCC: 3 | RNVC: 2
100332-50300-03: RNCC: 5 | RNVC: 2
100332-50300-03: RNCC: 5 | RNVC: 2
100332-50300.03: RNCC: 5 | RNVC: 2
100332-50300-03: RNCC: 5 | RNVC: 9
100332-50300.03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-135-6989
Butt Hinge

121356989
DIN7954-C30-MS-BK: RNCC: 2 | RNVC: 2
C30DIN7954MS: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-350-2189
Extension Drawer Slide

123502189
DZ0301-0018LE: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-12-340-9959
Metal Grille

123409959
1120-63121: RNCC: 2 | RNVC: 2
1120-63121: RNCC: 3 | RNVC: 2

13 Jul 1996

5340-12-355-0377
Access Hole Frame

123550377
5400049-622310.00: RNCC: 2 | RNVC: 2
5400049-622310.00: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-12-367-0430
Mounting Bracket

123670430
PIKVI60VA: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-12-333-4482
Befestigun Schelle

5340-12-327-5575
Electrical-Mechanical Equipment Post

123275575
60245217: RNCC: 3 | RNVC: 2

3 Feb 1992

5340-12-172-6669
Electrical-Mechanical Equipment Post

121726669
1224-303.18: RNCC: 2 | RNVC: 2
532008-0367.000: RNCC: 3 | RNVC: 2
532008-367: RNCC: 3 | RNVC: 2
532008-0367.000: RNCC: 5 | RNVC: 2
532008-367: RNCC: 5 | RNVC: 2
1224-303-18: RNCC: 5 | RNVC: 9
1224-303.18: RNCC: 5 | RNVC: 9

8 Feb 1978

5340-12-365-6296
Angle Bracket

123656296
J92228432-401: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-310-3440
Mounting Bracket

123103440
6100132-410000.00: RNCC: 2 | RNVC: 2
6100132-410000.00: RNCC: 3 | RNVC: 2

13 May 1987

5340-12-376-5509
Loop Clamp

123765509
JN0212-110: RNCC: 3 | RNVC: 2
NH1009810-10: RNCC: 5 | RNVC: 2

15 Oct 2008

5340-12-365-3161
Nut And Bolt Head Protective Cap

123653161
375014-03: RNCC: 3 | RNVC: 2

18 Dec 2004

5340-12-188-7741
Webbing Strap

121887741
5801479-3152: RNCC: 2 | RNVC: 2
5801479-3152: RNCC: 3 | RNVC: 2
5801479-3152: RNCC: 3 | RNVC: 2
5801479-3152: RNCC: 5 | RNVC: 9
5801479-3152: RNCC: 5 | RNVC: 9
000-D5-25X2,0X90-PE-RAL6031: RNCC: 6 | RNVC: 9

29 Jul 1981

5340-12-388-8297
Mounting Bracket

123888297
1386-0003: RNCC: 3 | RNVC: 2

26 Apr 2012

5340-12-383-2831
Mechanic Equipment Hardware Kit

123832831
NYX-DT-0824-10: RNCC: 3 | RNVC: 2

1 Oct 2010

5340-12-314-3111
Nut And Bolt Locking Plate

123143111
320308-050-101: RNCC: 3 | RNVC: 2
110 0133: RNCC: 5 | RNVC: 2
320308-05: RNCC: 5 | RNVC: 2
110 0113: RNCC: 5 | RNVC: 2
1100113: RNCC: 5 | RNVC: 2

24 Jun 1988

5340-12-380-2783
Bow Handle

123802783
110329: RNCC: 3 | RNVC: 2
57808000ANIRO00: RNCC: 5 | RNVC: 2
7808-104X96-ESTR: RNCC: 5 | RNVC: 2

14 Oct 2009

5340-12-185-2050
Bow Handle

121852050
58-701-00: RNCC: 3 | RNVC: 2
C 3782 230 BB: RNCC: 5 | RNVC: 2
C3782230BB: RNCC: 5 | RNVC: 2
C 3782 230 BB: RNCC: 5 | RNVC: 2
C3782230BB: RNCC: 5 | RNVC: 2

20 Sep 1980

5340-12-354-7689
Extension Drawer Slide

123547689
P-876180-002: RNCC: 3 | RNVC: 2
P876180-002: RNCC: 5 | RNVC: 2

23 Aug 2001

5340-12-701-7057
Mounting Plate

127017057
VG95211-ML-127017057: RNCC: 2 | RNVC: 2
5.12.7240.2580.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-149-9030
Resilient Mount

121499030
DIN95369-A1-3-CR-ST: RNCC: 2 | RNVC: 2
CUPM0UNTC1015: RNCC: 5 | RNVC: 2
151001-M6-CR.ST-50: RNCC: 5 | RNVC: 2
15100102: RNCC: 5 | RNVC: 2
60-100-050: RNCC: 5 | RNVC: 2
C1015: RNCC: 5 | RNVC: 2
VG95369-A1-3-CR-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5206
Angle Bracket

127025206
VG95211-ML-127025206: RNCC: 2 | RNVC: 2
5.51.7004.0070.08: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-346-9939
Helical Compression Spring Seat

123469939
324555335-WE7020/12/GA-Q27: RNCC: 3 | RNVC: 2
WE7020/12/GA-Q27: RNCC: 5 | RNVC: 2
WE7020/12/GA-Q27: RNCC: 5 | RNVC: 2

8 Oct 1998

5340-12-185-1448
Angle Bracket

121851448
81423900011: RNCC: 3 | RNVC: 2
205160-4000: RNCC: 5 | RNVC: 2
2-05160-4000: RNCC: 5 | RNVC: 2

16 Sep 1980

5340-12-304-8558
Manual Control Handle

123048558
8.316.001.011.08.00: RNCC: 3 | RNVC: 2
BHB315-325-1P0S7: RNCC: 5 | RNVC: 2
2490883: RNCC: 5 | RNVC: 2

28 Aug 1985

5340-12-382-0910
Access Cover

123820910
64415685: RNCC: 3 | RNVC: 2

6 May 2010

5340-12-319-4603
Mending Plate

123194603
503029: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-387-4601
Handle Grip

123874601
917356: RNCC: 3 | RNVC: 2

20 Dec 2011

5340-12-375-8452
Dust And Moisture Seal Protective Cap

123758452
4636910233: RNCC: 3 | RNVC: 2

10 Jul 2008

5340-12-310-9875
Mounting Bracket

123109875
3520980439: RNCC: 3 | RNVC: 2
00009724530: RNCC: 5 | RNVC: 9

15 Jul 1987

5340-12-315-7462
Mending Plate

123157462
23111-2858.04: RNCC: 2 | RNVC: 2
23111-2858.04: RNCC: 3 | RNVC: 2
1123586: RNCC: 5 | RNVC: 2
23111-2858.04: RNCC: 5 | RNVC: 9
23111-2858.04: RNCC: 5 | RNVC: 9
1123586: RNCC: 5 | RNVC: 9

25 Nov 1988

5340-12-315-4734
Nonmetallic Bumper

123154734
289543: RNCC: 3 | RNVC: 2
289543E84088: RNCC: 5 | RNVC: 2

26 Oct 1988

5340-12-334-4166
Shock Mount Pad

123344166
RU51917: RNCC: 3 | RNVC: 2
E665-18: RNCC: 5 | RNVC: 2
000 51 387: RNCC: 5 | RNVC: 2

5 May 1994

5340-12-381-2749
Door Handle

123812749
5602194: RNCC: 3 | RNVC: 2

28 Jan 2010

5340-12-382-6952
Retaining Strap

123826952
806280583: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-12-322-5988
Helical Compression Spring Seat

123225988
4613152594: RNCC: 3 | RNVC: 2
1416670: RNCC: 5 | RNVC: 2
1416670: RNCC: 5 | RNVC: 2

5 Sep 1990

5340-12-191-0502
Leather Strap

121910502
CF 339 323 AU: RNCC: 3 | RNVC: 2
CF 339 323 AU: RNCC: 5 | RNVC: 2

7 Jan 1982

5340-12-156-5449
Nonmetallic Bumper

121565449
42161-16000-02: RNCC: 3 | RNVC: 2
42161-16000-02: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-359-5980
Section Block Clamp

123595980
1016-0006: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-186-6467
Resilient Mount

121866467
0008-4533-000: RNCC: 3 | RNVC: 2
0008-4533-000: RNCC: 5 | RNVC: 9

23 Jan 1981

5340-12-352-4301
Spring Tension Clip

123524301
2500238-070411.003.0: RNCC: 2 | RNVC: 2
2500238-070411.003.0: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-702-6029
Loop Clamp

127026029
VG95211-ML-127026029: RNCC: 2 | RNVC: 2
5191A-42: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-373-5932
Loop Clamp

123735932
DIN3015-LD-4R-28-PA-W1: RNCC: 2 | RNVC: 2

20 Nov 2007

5340-12-329-1263
Extension Drawer Slide

123291263
5800583-094710.202: RNCC: 2 | RNVC: 2
GC447-1014LH: RNCC: 3 | RNVC: 2

21 Jul 1992

5340-12-333-4234
Webbing Strap

123334234
702-244800-952-0: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-391-3389
Angle Bracket

123913389
9999015-180601.002.0: RNCC: 2 | RNVC: 2
9999015-180601.002.0: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-12-701-5352
Angle Bracket

127015352
VG95211-ML-127015352: RNCC: 2 | RNVC: 2
5.12.6105.2040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-125-2554
Loop Clamp

121252554
DIN3016-1-D1-3X9-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-3X9-W1-2: RNCC: 3 | RNVC: 2
RSGU1.3/9: RNCC: 3 | RNVC: 2
RSGU1100.3/9: RNCC: 5 | RNVC: 2
95-75622: RNCC: 5 | RNVC: 2
9410009003: RNCC: 5 | RNVC: 2
RSGU1100-3-9: RNCC: 5 | RNVC: 2
VG95931-D3X9-W1: RNCC: 5 | RNVC: 9
VG95931D3X9W1: RNCC: 5 | RNVC: 9
DIN3016-D1-3X9-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-4031
Handwheel

121974031
VG85084-A-175X14-2.1096.01: RNCC: 2 | RNVC: 2
VG85084-A-175X14-2.1096.01: RNCC: 3 | RNVC: 2
VG85084-A-175X14-2.1096.01: RNCC: 3 | RNVC: 2
VG85084-A-175X14-2.1096.01: RNCC: 3 | RNVC: 9
A175X14VG85084-G-CUSN5ZNPB: RNCC: 5 | RNVC: 2
A175X14VG85084-RG5: RNCC: 5 | RNVC: 2
A175X14VG85084RG5: RNCC: 5 | RNVC: 2

19 Oct 1983

5340-12-128-9610
Retaining Strap

121289610
VG95933CR-8-MS-BK: RNCC: 2 | RNVC: 2
2/1D8MMN325MS: RNCC: 3 | RNVC: 2
378135: RNCC: 5 | RNVC: 2
2-1D8MMN325MS: RNCC: 5 | RNVC: 2
378134: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-378-6376
Loop Clamp

123786376
DIN3016-1-D1-40X12-W1-2-CR: RNCC: 2 | RNVC: 2
80041417: RNCC: 5 | RNVC: 2

28 Apr 2009

5340-12-373-1579
Block Clamp

123731579
RBP8-533.7: RNCC: 3 | RNVC: 2
RBP8-533.7: RNCC: 5 | RNVC: 2

4 Oct 2007

5340-12-701-2154
Mounting Plate

127012154
VG95211-ML-127012154: RNCC: 2 | RNVC: 2
5.12.0605.0410.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-192-8746
Angle Bracket

121928746
F01-212330.07.0: RNCC: 3 | RNVC: 2
F01-212330-07-0: RNCC: 5 | RNVC: 2

1 Jun 1982

5340-12-330-0542
Retaining Band

123300542
1603129: RNCC: 3 | RNVC: 2
4-1603-129: RNCC: 5 | RNVC: 2
8457645: RNCC: 5 | RNVC: 2

28 Oct 1992

5340-12-701-7295
Loop Clamp

127017295
VG95211-ML-127017295: RNCC: 2 | RNVC: 2
5.12.7607.1020.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-184-9854
Mounting Bracket

121849854
F01-240117.01.0: RNCC: 3 | RNVC: 2
F01-240117-01-0: RNCC: 5 | RNVC: 9

30 Aug 1980

5340-12-197-7940
Nonmetallic Bumper

121977940
845-25081B/AN.NR55.ST: RNCC: 3 | RNVC: 2
25081B/AN-BSTN5590: RNCC: 3 | RNVC: 2
ANSCHLAGSCHIENE D 130X35 NR55.ST: RNCC: 5 | RNVC: 2

23 Nov 1983

5340-12-378-2394
Mechanical Stop

123782394
027015201: RNCC: 3 | RNVC: 2

23 Mar 2009

5340-12-366-1097
Manual Control Handle

123661097
2500278-191520.005.0: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-701-4222
Loop Clamp

127014222
VG95211-ML-127014222: RNCC: 2 | RNVC: 2
5.12.5312.1570.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-155-2290
Bridge Clamp

121552290
160-26893-03: RNCC: 3 | RNVC: 2
160-26893-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-9411
Metal Runner

123219411
702-141600-951-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-333-9173
Mounting Bracket

123339173
405-6-24: RNCC: 3 | RNVC: 2
405-6.24: RNCC: 5 | RNVC: 2

23 Feb 1994

5340-12-190-2225
Retaining Strap

121902225
DIN1596-9ZN: RNCC: 2 | RNVC: 2
DIN1596-9ZN: RNCC: 3 | RNVC: 2
DIN1596-9ZN: RNCC: 3 | RNVC: 2
DIN1596-9ZN: RNCC: 5 | RNVC: 2
DIN1596-9ZN: RNCC: 5 | RNVC: 2
DIN1596-9BK: RNCC: 5 | RNVC: 9
DIN1596-9BK: RNCC: 5 | RNVC: 9
5400000009: RNCC: 5 | RNVC: 9
DIN1596-9: RNCC: 5 | RNVC: 9
DIN1596-9: RNCC: 5 | RNVC: 9

12 Nov 1981

5340-12-328-9880
Mending Plate

123289880
KM.S01-120171.007: RNCC: 3 | RNVC: 2

7 Jul 1992

5340-12-340-8737
Dashpot

123408737
6030064/6030065/4700060: RNCC: 3 | RNVC: 2
2795.308: RNCC: 5 | RNVC: 2

25 Jun 1996

5340-12-390-7909
Webbing Strap

123907909
6.667-222.0: RNCC: 3 | RNVC: 2

12 Dec 2012

5340-12-701-7070
Mounting Plate

127017070
VG95211-ML-127017070: RNCC: 2 | RNVC: 2
5.12.7240.3040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-318-6712
Casement Fastener

123186712
307-0321-00-00: RNCC: 3 | RNVC: 2

8 Aug 1989

5340-12-316-7658
Loop Clamp

123167658
2500136-9008.00: RNCC: 2 | RNVC: 2
331968: RNCC: 3 | RNVC: 2
125.600.276: RNCC: 3 | RNVC: 2

9 Feb 1989

5340-12-385-6620
Angle Bracket

123856620
F1.1692-50-20-00.00-26: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-12-349-8666
Mounting Bracket

123498666
VG95211-ML-123498666: RNCC: 2 | RNVC: 2
T212M3002102: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-12-171-8749
Spacing Threaded Standoff

121718749
PAN5170-08-090: RNCC: 3 | RNVC: 2

23 Nov 1977

5340-12-339-0102
Electronic Equipment Hardware Kit

123390102
5L.7793.001-10: RNCC: 3 | RNVC: 2

26 Sep 1995

5340-12-187-0991
Dust And Moisture Seal Protective Cap

121870991
C42326A20C118: RNCC: 3 | RNVC: 2
5800573-1112-090: RNCC: 5 | RNVC: 2
5800573-1112.090: RNCC: 5 | RNVC: 2
C42326-A20-C118: RNCC: 5 | RNVC: 2

5 Mar 1981

5340-12-310-3038
Nonmetallic Bumper

123103038
82300-HQ8.73: RNCC: 3 | RNVC: 2
81.96210.0398: RNCC: 3 | RNVC: 2
81962100398: RNCC: 5 | RNVC: 2

7 May 1987

5340-12-384-4299
Mounting Plate

123844299
1092219: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-12-361-2056
Support Hook

123612056
580.0237: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-12-303-8973
Angle Bracket

123038973
3757401: RNCC: 3 | RNVC: 2

15 May 1985

5340-12-360-6108
Spring Tension Clip

123606108
UK12675: RNCC: 3 | RNVC: 2
0009314009: RNCC: 5 | RNVC: 2
0009314009: RNCC: 5 | RNVC: 2

16 Jun 2003

5340-12-313-0615
Retaining Strap

123130615
2300147-340100.001.0: RNCC: 2 | RNVC: 2
2300147-340100.001.0: RNCC: 3 | RNVC: 2

1 Mar 1988

5340-12-302-6166
Rod End Clevis

123026166
YK03310821: RNCC: 3 | RNVC: 2
03310821: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 31 0821: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-316-9651
Angle Bracket

123169651
3220180440: RNCC: 3 | RNVC: 2

28 Feb 1989

5340-12-387-0125
Bumper

123870125
1044660: RNCC: 3 | RNVC: 2

26 Oct 2011

5340-12-701-2927
Rod End Connector

127012927
VG95211-ML-127012927: RNCC: 2 | RNVC: 2
5.12.5101.2951.93: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-309-7019
Mending Plate

123097019
KMS013-212000.003.0: RNCC: 3 | RNVC: 2

18 Feb 1987

5340-12-386-0296
Butt Hinge

123860296
1002779: RNCC: 3 | RNVC: 2
SK913-110030.000.0: RNCC: 5 | RNVC: 2
4617500521: RNCC: 5 | RNVC: 2

2 Aug 2011

5340-12-332-8506
Nonmetallic Bumper

123328506
59006801: RNCC: 3 | RNVC: 2
EE120/92KERN-B-QUALRTEIIKOMPLETT: RNCC: 3 | RNVC: 2
EE120/92-KERN"B": RNCC: 5 | RNVC: 2
MGW720808 S3: RNCC: 5 | RNVC: 2
MGW720808S3: RNCC: 5 | RNVC: 2

27 Sep 1993

5340-12-157-6833
Door Button

121576833
5148-260: RNCC: 3 | RNVC: 2
5148-260: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-5596
Angle Bracket

127015596
VG95211-ML-127015596: RNCC: 2 | RNVC: 2
5.12.6114.0002.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-301-3983
Access Cover

123013983
5801998-663210-01: RNCC: 2 | RNVC: 2
5801998-663210-01: RNCC: 3 | RNVC: 2
5801998-663210.01: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-12-702-1891
Mounting Bracket

127021891
VG95211-ML-127021891: RNCC: 2 | RNVC: 2
30.7208.520: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-171-2537
Resilient Mount

121712537
81962100269: RNCC: 3 | RNVC: 2
845-81.96210-0269.NR60.ST: RNCC: 5 | RNVC: 2
57860610046: RNCC: 5 | RNVC: 2
786061: RNCC: 5 | RNVC: 2
81.96210-0269: RNCC: 5 | RNVC: 2

21 Sep 1977

5340-12-344-9910
Webbing Strap

123449910
58R137-13194: RNCC: 2 | RNVC: 2
58R137-13194: RNCC: 3 | RNVC: 2

20 Jan 1998

5340-12-380-3479
Access Cover

123803479
T2-3M: RNCC: 3 | RNVC: 2

21 Oct 2009

5340-12-145-6189
Webbing Strap

121456189
23176-262163.00.0: RNCC: 2 | RNVC: 2
82300-23176-262163.00.0: RNCC: 3 | RNVC: 2
23176-262163.00.0: RNCC: 5 | RNVC: 2
23176-262163-00-0: RNCC: 5 | RNVC: 2
23176-262163-00-0: RNCC: 5 | RNVC: 9
23176-262163.00.0: RNCC: 5 | RNVC: 9
82300-C380X20-NBR-ST-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-319-5662
Mounting Plate

123195662
V22.611.13-03: RNCC: 3 | RNVC: 2

13 Oct 1989

5340-12-300-7966
Mending Plate

123007966
23114-3517.01: RNCC: 2 | RNVC: 2
23114-3517.01: RNCC: 3 | RNVC: 2
23114-3517-01: RNCC: 5 | RNVC: 9
23114-3517.01: RNCC: 5 | RNVC: 9
23114-3517-01: RNCC: 5 | RNVC: 9
23114-3517.01: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-187-7318
Loop Clamp

121877318
2300109-010221.000.0: RNCC: 2 | RNVC: 2
RSGU8041.000/15: RNCC: 3 | RNVC: 2
2300109-010221-000-0: RNCC: 5 | RNVC: 2
2300109-010221.000.0: RNCC: 5 | RNVC: 2
4218041000: RNCC: 5 | RNVC: 2
2300109-010221-000-0: RNCC: 5 | RNVC: 2
2300109-010221.000.0: RNCC: 5 | RNVC: 2
2300109-010221-000-0: RNCC: 5 | RNVC: 9
2300109-010221.000.0: RNCC: 5 | RNVC: 9

4 May 1981

5340-12-321-5616
Dust And Moisture Seal Protective Plug

123215616
P-888530-003: RNCC: 3 | RNVC: 2
P888530-003: RNCC: 5 | RNVC: 2

1 Jun 1990

5340-12-302-6822
Helical Compression Spring Retainer

123026822
11.009.802-4: RNCC: 3 | RNVC: 2
11-009-802-4: RNCC: 5 | RNVC: 2
11-009-204-4: RNCC: 5 | RNVC: 9
11.009.204-4: RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-326-7238
Mounting Plate

123267238
704-122100-925-0: RNCC: 3 | RNVC: 2

23 Oct 1991

5340-12-314-5743
Plain Solid Disk

123145743
320501-030-101: RNCC: 3 | RNVC: 2
110 0245: RNCC: 5 | RNVC: 2
1100245: RNCC: 5 | RNVC: 2
1100245: RNCC: 5 | RNVC: 2
320501-03: RNCC: 5 | RNVC: 2

20 Jul 1988

5340-12-379-4519
Access Cover

123794519
5079 306 002: RNCC: 3 | RNVC: 2

24 Jul 2009

5340-12-319-6791
Angle Bracket

123196791
5610780285: RNCC: 3 | RNVC: 2

25 Oct 1989

5340-12-175-8040
Dust And Moisture Seal Protective Cap

121758040
42191: RNCC: 3 | RNVC: 2
15073: RNCC: 5 | RNVC: 2

18 Oct 1978

5340-12-374-8170
Spacing Threaded Standoff

123748170
05.06.704: RNCC: 3 | RNVC: 2

27 Mar 2008

5340-12-316-9828
Dust And Moisture Seal Protective Cap

123169828
20785: RNCC: 3 | RNVC: 2
M33A: RNCC: 5 | RNVC: 2

1 Mar 1989

5340-12-374-8444
Spring Tension Clip

123748444
35711955: RNCC: 3 | RNVC: 2

31 Mar 2008

5340-12-371-3981
Mounting Bracket

123713981
2304918: RNCC: 3 | RNVC: 2

26 Mar 2007

5340-12-026-8789

5340-12-166-0981

5340-12-369-5271
Dust And Moisture Seal Protective Plug

123695271
1052-0127: RNCC: 3 | RNVC: 2

18 Jul 2006

5340-12-166-7944
Compression Cup

121667944
53-1160-901-10: RNCC: 3 | RNVC: 2

21 Oct 1976

5340-12-163-5066
Angle Bracket

121635066
23290-041000.003: RNCC: 2 | RNVC: 2
23290-041000-003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-170-4301
Access Cover

121704301
1400003-14090-00: RNCC: 3 | RNVC: 2
1400003-14090-00: RNCC: 5 | RNVC: 9
1400003-14090.00: RNCC: 5 | RNVC: 9

14 Jul 1977

5340-12-182-2532
Access Door

121822532
2300033-304100.04: RNCC: 2 | RNVC: 2
2300033-304100-04: RNCC: 5 | RNVC: 9
FTW302-03-05-01-04: RNCC: 5 | RNVC: 9
2300033-304100-04: RNCC: 5 | RNVC: 9
2300033-304100.04: RNCC: 5 | RNVC: 9
2300033-304100.04: RNCC: 5 | RNVC: 9

21 Jan 1980

5340-12-127-2677
Pipe Bracket

121272677
51974015005: RNCC: 3 | RNVC: 2
00.00430-3875: RNCC: 5 | RNVC: 2
00004303875: RNCC: 5 | RNVC: 2
R3875: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-166-7733
Dust And Moisture Seal Protective Cap

121667733
5800899-1100.003: RNCC: 2 | RNVC: 2
0705.365-295: RNCC: 3 | RNVC: 2
5800899-1100-003: RNCC: 5 | RNVC: 9

21 Oct 1976

5340-12-307-2770
Mending Plate

123072770
640-02-17: RNCC: 3 | RNVC: 2

28 May 1986

5340-12-702-2489
Mounting Plate

127022489
VG95211-ML-127022489: RNCC: 2 | RNVC: 2
30.8700.02: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-324-7938
Mounting Bracket

123247938
10572-02: RNCC: 3 | RNVC: 2

22 Mar 1991

5340-12-315-6107
Resilient Mount

123156107
H63-146-90-102-8: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-12-384-5724
Mounting Plate

123845724
F1.1781-30-01-10.00-00: RNCC: 3 | RNVC: 2

9 Mar 2011

5340-12-701-5443
Retaining Strap

127015443
VG95211-ML-127015443: RNCC: 2 | RNVC: 2
5.12.6110.8130.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-347-9494
Mending Plate

123479494
2500238-150800.000.0: RNCC: 2 | RNVC: 2
2500238-150800.000.0: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-12-384-1162
Webbing Strap

123841162
4100072-150258.000.0: RNCC: 2 | RNVC: 2
4100072-150258.000.0: RNCC: 3 | RNVC: 2

24 Jan 2011

5340-12-353-1453
Padlock

123531453
6748-00: RNCC: 3 | RNVC: 2
6748-00: RNCC: 5 | RNVC: 9

1 Feb 2001

5340-12-331-9015
Leather Strap

123319015
1300/11-RAL6031: RNCC: 3 | RNVC: 2
1300/11: RNCC: 5 | RNVC: 9

5 Jul 1993

5340-12-701-4543
Loop Clamp

127014543
VG95211-ML-127014543: RNCC: 2 | RNVC: 2
5.12.5314.1000.75: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-306-0698
Mending Plate

123060698
5801984-202000.002.0: RNCC: 2 | RNVC: 2
5801984-202000.002.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-377-6029
Handle Grip

123776029
2500308-187990.004.0: RNCC: 3 | RNVC: 2

28 Jan 2009

5340-12-310-8959
Snap Hook

123108959
2470 I 100X10: RNCC: 3 | RNVC: 9
2470-I 100X10: RNCC: 5 | RNVC: 9

7 Jul 1987

5340-12-321-4663
Angle Bracket

123214663
7068-12710-002-2: RNCC: 3 | RNVC: 2

22 May 1990

5340-12-305-2969
Door Button

123052969
4900059-982120.000.0/4: RNCC: 3 | RNVC: 2
4900059-982120.004.0: RNCC: 5 | RNVC: 2

18 Oct 1985

5340-12-305-1280
Mending Plate

123051280
P-243842-403: RNCC: 3 | RNVC: 2
P243842-403: RNCC: 5 | RNVC: 2

30 Sep 1985

5340-12-701-6303
Mounting Plate

127016303
VG95211-ML-127016303: RNCC: 2 | RNVC: 2
5.12.7050.0060.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-346-4852
Access Cover

123464852
2300348-183222.000.0: RNCC: 2 | RNVC: 2
1591434: RNCC: 3 | RNVC: 2
2300348-183222.000.0: RNCC: 5 | RNVC: 2

30 Jul 1998

5340-12-183-6591
Detent Plunger

121836591
4-04-010-509-39: RNCC: 3 | RNVC: 2
32147-5-2: RNCC: 5 | RNVC: 2

8 May 1980

5340-12-701-6978
Angle Bracket

127016978
VG95211-ML-127016978: RNCC: 2 | RNVC: 2
5.12.7226.1020.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6193
Rod End Clevis

127016193
VG95211-ML-127016193: RNCC: 2 | RNVC: 2
5.12.7011.0203.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-198-0707
Furniture Glide

121980707
10601-001: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-12-193-2246
Compression Cup

121932246
086.00-02-00-00-058: RNCC: 3 | RNVC: 2

1 Jul 1982

5340-12-378-3980
Mounting Bracket

123783980
895-047-783: RNCC: 3 | RNVC: 2
891039630: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-12-302-1353
Clamping Catch

123021353
556-8204080.00: RNCC: 3 | RNVC: 2
4900075-4080.00: RNCC: 5 | RNVC: 9
4900075-4080-00: RNCC: 5 | RNVC: 9

6 Dec 1984

5340-12-330-2508
Access Door

123302508
910100801: RNCC: 3 | RNVC: 2
9101.008-00: RNCC: 5 | RNVC: 2
9101.008-01: RNCC: 5 | RNVC: 2
910100800: RNCC: 5 | RNVC: 2

21 Nov 1992

5340-12-172-7290
Nonmetallic Bumper

121727290
1091490: RNCC: 3 | RNVC: 2
475320: RNCC: 5 | RNVC: 2
0334 9671: RNCC: 5 | RNVC: 2
3349671EE5098-13: RNCC: 5 | RNVC: 2
475320: RNCC: 5 | RNVC: 2
475320: RNCC: 5 | RNVC: 2
3349671: RNCC: 5 | RNVC: 9

14 Feb 1978

5340-12-330-8801
Metallic Bumper

123308801
480-7347-10-37-00: RNCC: 3 | RNVC: 2
480/7347-10-37-00: RNCC: 5 | RNVC: 2

18 Feb 1993

5340-12-314-5308
Electrical-Mechanical Equipment Post

123145308
512214-0229.000: RNCC: 3 | RNVC: 2
512214-0229: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-190-5009
Nonmetallic Bumper

121905009
C22136-A1000-C181: RNCC: 3 | RNVC: 2
C22136A1000C181: RNCC: 5 | RNVC: 9

1 Dec 1981

5340-12-369-4654
Mounting Bracket

123694654
ANDK5-10: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-12-328-6843
Support Hook

123286843
AFG-07-214-14-00-02: RNCC: 3 | RNVC: 2
07-214-14-00-02: RNCC: 5 | RNVC: 2

13 Jun 1992

5340-12-701-7542
Dust And Moisture Seal Protective Cap

127017542
VG95211-ML-127017542: RNCC: 2 | RNVC: 2
5.12.7616.0610.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7109
Angle Bracket

127017109
VG95211-ML-127017109: RNCC: 2 | RNVC: 2
5.12.7601.3001.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-366-1093
Flush Bolt

123661093
2500267-190920.000.0: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-337-0356
Mounting Bracket

123370356
2300125-183100.007.0: RNCC: 2 | RNVC: 2
2300125-183100.007.0: RNCC: 3 | RNVC: 2

12 Jan 1995

5340-12-317-9070
Access Cover

123179070
1000042-193610.12M01: RNCC: 3 | RNVC: 2
1000042-193610.12: RNCC: 5 | RNVC: 9

24 May 1989

5340-12-190-7159
Sealing Plug Assembly

121907159
E4-2015280: RNCC: 3 | RNVC: 2
E4-2015280: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-339-7843
Spring Loaded Cylinder Fastener

123397843
87-401.60-01.02-00: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-12-324-5115
Resilient Mount

123245115
112771: RNCC: 3 | RNVC: 2
510000-112771: RNCC: 3 | RNVC: 2

25 Feb 1991

5340-12-340-7139
Turnbuckle

123407139
4200112-4838.07.02: RNCC: 2 | RNVC: 2
4200112-4838.07.02: RNCC: 3 | RNVC: 2
4838.07.02: RNCC: 5 | RNVC: 2

30 May 1996

5340-12-323-2281
Door Button

123232281
1000-U153: RNCC: 3 | RNVC: 2
200-9119: RNCC: 3 | RNVC: 2
13 9000 338: RNCC: 5 | RNVC: 2

5 Nov 1990

5340-12-315-2608
Mending Plate

123152608
5-512-2909: RNCC: 3 | RNVC: 2

6 Oct 1988

5340-12-370-5705
Lock-Release Lever

123705705
V6520-03011-105: RNCC: 2 | RNVC: 2
V6520-03011-105: RNCC: 3 | RNVC: 2

23 Nov 2006

5340-12-359-8340
Dust And Moisture Seal Protective Plug

123598340
GN346-30-M16: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-197-1232
Metal Runner

121971232
12743-410.004: RNCC: 2 | RNVC: 2
12743-410.004: RNCC: 3 | RNVC: 2
009-017.410-004: RNCC: 5 | RNVC: 2
12743-410.004: RNCC: 5 | RNVC: 9

21 Sep 1983

5340-12-197-4073
Clamping Catch

121974073
5801807-1800: RNCC: 2 | RNVC: 2
5801807-1800: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-307-6735
Angle Bracket

123076735
537176-8227.000: RNCC: 3 | RNVC: 2
537176-8227: RNCC: 5 | RNVC: 9
537176-8227.000: RNCC: 5 | RNVC: 9

16 Jul 1986

5340-12-370-4900
Access Cover

123704900
1762-050200.000.0: RNCC: 3 | RNVC: 2

14 Nov 2006

5340-12-360-0406
Mounting Plate

123600406
03240-16X20: RNCC: 3 | RNVC: 2
NLM03240-16X20: RNCC: 5 | RNVC: 2

1 Apr 2003

5340-12-383-4266
Clamping Catch

123834266
BP108-501: RNCC: 3 | RNVC: 2
1MTA-030302-00A: RNCC: 5 | RNVC: 2

19 Oct 2010

5340-12-181-3406
Retaining Band

121813406
2300033-430300.18: RNCC: 2 | RNVC: 2
257.095: RNCC: 3 | RNVC: 2
1007-1600-0002: RNCC: 5 | RNVC: 2
257-095: RNCC: 5 | RNVC: 2
0008350091: RNCC: 5 | RNVC: 2
2300033-430300.18: RNCC: 5 | RNVC: 9
2300033-430300.18: RNCC: 5 | RNVC: 9

14 Nov 1979

5340-12-701-1715
Angle Bracket

127011715
VG95211-ML-127011715: RNCC: 2 | RNVC: 2
5.12.0246.0000.65: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6483
Angle Bracket

127016483
VG95211-ML-127016483: RNCC: 2 | RNVC: 2
5.12.7204.8194.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-5834
Mounting Bracket

123595834
9428902446: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-12-090-5253

5340-12-354-8663
Mechanical Stop

123548663
133440: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-349-8811
Bow Handle

123498811
320.131446: RNCC: 3 | RNVC: 2
13.1446: RNCC: 5 | RNVC: 9

20 Jan 2000

5340-12-388-1980
Pipe Hanger

123881980
5871420242: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-195-0400
Angle Bracket

121950400
42-1543-192310.00.0: RNCC: 3 | RNVC: 2
42-1543-192310-00-0: RNCC: 5 | RNVC: 2
42-1543-192310-00-0: RNCC: 5 | RNVC: 9

5 Jan 1983

5340-12-169-9712
Access Cover

121699712
BZ3-36: RNCC: 3 | RNVC: 2

15 Jun 1977

5340-12-334-4051
Mending Plate

123344051
702-241500-971-0: RNCC: 3 | RNVC: 2

4 May 1994

5340-12-701-2552
Mounting Bracket

127012552
VG95211-ML-127012552: RNCC: 2 | RNVC: 2
5.12.4003.0022.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-5036
Retaining Strap

127005036
VG95211-ML-127005036: RNCC: 2 | RNVC: 2
5150A-6: RNCC: 3 | RNVC: 2
0500840055519: RNCC: 5 | RNVC: 2

19 Sep 1992

5340-12-172-2516
Flush Catch Claw

121722516
VG95136A40X29-TEIL 2: RNCC: 2 | RNVC: 2
VG95136B2-35X20-TEIL 2: RNCC: 2 | RNVC: 2
VG95136A40X29-TEIL 2: RNCC: 3 | RNVC: 2
602K0210-2: RNCC: 3 | RNVC: 2
VG95136A40X29-TEIL 2: RNCC: 5 | RNVC: 9

4 Jan 1978

5340-12-306-3417
Nut And Bolt Locking Plate

123063417
1865-080000.01.0: RNCC: 3 | RNVC: 9

20 Feb 1986

5340-12-701-2830
Rod End Connector

127012830
VG95211-ML-127012830: RNCC: 2 | RNVC: 2
5.12.5101.0840.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-4700
Rod End Clevis

123614700
2500262-196100.004.0: RNCC: 2 | RNVC: 2
2500262-196100.004.0: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-187-2815
Angle Bracket

121872815
5800043-1000.06: RNCC: 2 | RNVC: 2
2-03.003: RNCC: 3 | RNVC: 2
5800043-1000.06: RNCC: 3 | RNVC: 2
5800043-1000.06: RNCC: 3 | RNVC: 2
5800043-1000.06: RNCC: 5 | RNVC: 2
5800043-1000.06: RNCC: 5 | RNVC: 2
5800043-1000-06: RNCC: 5 | RNVC: 2
5800043-1000.06: RNCC: 5 | RNVC: 9
5800043-1000.06: RNCC: 5 | RNVC: 9
5800043-1000-06: RNCC: 5 | RNVC: 9

26 Mar 1981

5340-12-149-7728
Nonmetallic Bumper

121497728
5800603-0130.008: RNCC: 2 | RNVC: 2
2243024703: RNCC: 3 | RNVC: 2
2P280-25-8: RNCC: 5 | RNVC: 2
5800603-0130-008: RNCC: 5 | RNVC: 9
22430 24703: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-309-0422
Double Angle Bracket

123090422
5803561-000000.02: RNCC: 2 | RNVC: 2
7400085-1200.02: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-12-318-9044
Mounting Bracket

123189044
5803475-000100.00: RNCC: 2 | RNVC: 2
5803475-000100.00: RNCC: 3 | RNVC: 2

24 Aug 1989

5340-12-329-0212
Webbing Strap

123290212
2950-600.00: RNCC: 3 | RNVC: 2
000-A3-20X2,0X410-BW-RAL6031: RNCC: 6 | RNVC: 9

9 Jul 1992

5340-12-321-9810
Metallic Bumper

123219810
16187-01: RNCC: 3 | RNVC: 2

16 Jul 1990

5340-12-372-0722
Access Cover

123720722
480-4122-03-00-01: RNCC: 3 | RNVC: 2
480/4122-03-00-01: RNCC: 5 | RNVC: 2

15 Jun 2007

5340-12-158-1311
Butt Hinge

121581311
33-869-45: RNCC: 3 | RNVC: 2
5800357-801000-11: RNCC: 5 | RNVC: 9
5800357-801000.11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-307-3344
Retaining Band

123073344
2300041-180160.00: RNCC: 2 | RNVC: 2
790-51.60.000-02: RNCC: 3 | RNVC: 2
2300041-180160.00: RNCC: 5 | RNVC: 9

5 Jun 1986

5340-12-319-0810
Dust And Moisture Seal Protective Plug

123190810
04362124: RNCC: 3 | RNVC: 2

5 Sep 1989

5340-12-392-8028
Mounting Plate

123928028
4609890372: RNCC: 3 | RNVC: 2
4609890372: RNCC: 5 | RNVC: 2

11 Jul 2013

5340-12-133-1452

5340-12-310-3624
Festhalte- Klipp

5340-12-043-8896

5340-12-172-3794
Mending Plate

121723794
805-10-57-04-01: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-12-701-5572
Mounting Bracket

127015572
VG95211-ML-127015572: RNCC: 2 | RNVC: 2
5.12.6113.8040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-174-1158
Helical Compression Spring Seat

121741158
8950700914: RNCC: 3 | RNVC: 2
148-1470: RNCC: 5 | RNVC: 2
148-1470: RNCC: 5 | RNVC: 2
0178608: RNCC: 5 | RNVC: 2
148-1470: RNCC: 5 | RNVC: 9
178608: RNCC: 5 | RNVC: 9

6 Jun 1978

5340-12-314-7612
Resilient Mount

123147612
DIN95363-B20X25-NR65ST: RNCC: 2 | RNVC: 2
1.20.25.3.65NR/ST: RNCC: 5 | RNVC: 2
811.010.020.025.06X20.NR65.ST: RNCC: 5 | RNVC: 2
31658/B-BSTN6590: RNCC: 5 | RNVC: 2
31658/V-BSTN6590: RNCC: 5 | RNVC: 2
VG95363-B20X25-NR65ST: RNCC: 5 | RNVC: 9

6 Aug 1988

5340-12-700-1896
Nonmetallic Bumper

127001896
740-33-SB111: RNCC: 2 | RNVC: 2

31 Oct 1991

5340-12-337-3432
Nonmetallic Bumper

123373432
3101-46-01.03: RNCC: 3 | RNVC: 2
D 3101-46-01.03: RNCC: 5 | RNVC: 2

16 Feb 1995

5340-12-172-2522
Flush Catch Claw

121722522
VG95136B1-50X30-TEIL 2: RNCC: 2 | RNVC: 2
VG95136B1-50X30-TEIL 2: RNCC: 3 | RNVC: 2
602K0152-002-00.4: RNCC: 3 | RNVC: 2
602K0152-2: RNCC: 5 | RNVC: 2
VG95136B1-50X30-TEIL 2: RNCC: 5 | RNVC: 9

4 Jan 1978

5340-12-386-5717
Access Cover

123865717
4000A-310626.000.0: RNCC: 3 | RNVC: 2

12 Sep 2011

5340-12-353-1828
Double Angle Bracket

123531828
2500238-042000.007.0: RNCC: 2 | RNVC: 2
2500238-042000.007.0: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-383-9475
Loop Clamp

123839475
6.373-359.0: RNCC: 3 | RNVC: 2

28 Dec 2010

5340-12-362-0798
Bail Handle

123620798
M-18-094: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-304-0743
Plain Solid Disk

123040743
245033-001: RNCC: 3 | RNVC: 2
C74451-Z1069-U9: RNCC: 5 | RNVC: 2

10 Jun 1985

5340-12-177-5129
Flush Bolt

121775129
2300002-182200.001: RNCC: 2 | RNVC: 2
2300002-182200.001: RNCC: 3 | RNVC: 2
2300002-182200-001: RNCC: 5 | RNVC: 9
2300002-182200.001: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-178-1261
Nonmetallic Bumper

121781261
2579-1400: RNCC: 2 | RNVC: 2
2579-1400: RNCC: 3 | RNVC: 2
114009: RNCC: 3 | RNVC: 2
2579-1400: RNCC: 5 | RNVC: 2
2579-1400: RNCC: 5 | RNVC: 2
2579-1400: RNCC: 5 | RNVC: 2

22 Mar 1979

5340-12-313-3386
Manual Control Handle

123133386
2300194-181220.000: RNCC: 3 | RNVC: 2
2300194-181220.000: RNCC: 5 | RNVC: 9
9843571: RNCC: 5 | RNVC: 9
2300194-181220.000: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-309-6208
Extension Drawer Slide

123096208
GM501-1282 MIT 2354LH: RNCC: 3 | RNVC: 2
558-7275: RNCC: 5 | RNVC: 2
GM501-1282 MIT 2354LH: RNCC: 5 | RNVC: 2
558-7275: RNCC: 5 | RNVC: 2
GM501-1282 MIT 2354LH: RNCC: 5 | RNVC: 2
558-7275: RNCC: 5 | RNVC: 9
GM501-1282 MIT 2354LH: RNCC: 5 | RNVC: 9
558-7275: RNCC: 5 | RNVC: 9
GM501-1282 MIT 2354LH: RNCC: 5 | RNVC: 9

10 Feb 1987

5340-12-371-9344
Mechanical Stop

123719344
52742: RNCC: 3 | RNVC: 2
4311-01.13.00: RNCC: 5 | RNVC: 2

31 May 2007

5340-12-335-0491
Extension Drawer Slide

123350491
4900399-460011.01: RNCC: 2 | RNVC: 2
4900399-460011.01: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-12-362-6936
Angle Bracket

123626936
5242-025420A01B: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-356-3258
Double Angle Bracket

123563258
2125-121000A71B: RNCC: 2 | RNVC: 2
2125-121000A71B: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-12-354-2243
Door Button

123542243
2653-051600.00: RNCC: 2 | RNVC: 2
2653-051600.00: RNCC: 3 | RNVC: 2

21 Jun 2001

5340-12-363-1162
Roller Holder

123631162
5055-025230.10B: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-358-1356
Access Hole Frame

123581356
2500261-060000.006.0: RNCC: 2 | RNVC: 2
2500261-060000.006.0: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-12-335-3603
Mounting Bracket

123353603
6700018-201820.00: RNCC: 2 | RNVC: 2
6700018-201820.00: RNCC: 3 | RNVC: 2

12 Aug 1994

5340-12-382-5098
Support Hook

123825098
E11.01219-0007: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-12-328-7002
Pipe Hanger

123287002
2653-030446.00: RNCC: 2 | RNVC: 2
2653-030446.00: RNCC: 3 | RNVC: 2

17 Jun 1992

5340-12-177-7187
Webbing Strap

121777187
52-1405-143-03: RNCC: 3 | RNVC: 2

14 Feb 1979

5340-12-132-0961
Spring Tension Clip

121320961
8HS 071 415-00: RNCC: 3 | RNVC: 2
50-266-226VERZINKT: RNCC: 3 | RNVC: 2
071415-00: RNCC: 5 | RNVC: 2
76-84: RNCC: 5 | RNVC: 2
18225AVERZINKT: RNCC: 5 | RNVC: 2
8HS071415-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-5284
Retaining Strap

121645284
5800828-1471-006: RNCC: 3 | RNVC: 2
C20145-A70-C71: RNCC: 5 | RNVC: 2
C20145A70C71: RNCC: 5 | RNVC: 2
5800828-1471.006: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-186-7442
Loop Clamp

121867442
5802206-030060: RNCC: 2 | RNVC: 2
535.1372: RNCC: 3 | RNVC: 2
5351372: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-327-4536
Multiple Angle Bracket

123274536
81.61440.4003: RNCC: 3 | RNVC: 2

23 Jan 1992

5340-12-191-2065
Lock-Release Lever

121912065
0993921: RNCC: 3 | RNVC: 2
75E10.11.35: RNCC: 5 | RNVC: 2

18 Jan 1982

5340-12-337-8492
Access Hole Frame

123378492
10 0067 535: RNCC: 3 | RNVC: 2
100067535: RNCC: 5 | RNVC: 2

24 Apr 1995

5340-12-327-2420
Lock-Release Lever

123272420
4043000204: RNCC: 3 | RNVC: 2

19 Dec 1991

5340-12-363-2915
Mounting Plate

123632915
599.076.006.005: RNCC: 3 | RNVC: 2
81657520011: RNCC: 5 | RNVC: 2

20 May 2004

5340-12-301-7907
Flare Lock Fastener

123017907
NO PRIMARY REF 12-301-7907: RNCC: 3 | RNVC: 2
0009903392: RNCC: 5 | RNVC: 2
200091000: RNCC: 5 | RNVC: 9

9 Nov 1984

5340-12-334-0323
Bow Handle

123340323
0396.5176.00: RNCC: 3 | RNVC: 2
0396.5176.00: RNCC: 5 | RNVC: 2
ZZG-95: RNCC: 5 | RNVC: 2

11 Mar 1994

5340-12-321-8961
Loop Clamp

123218961
DIN3015-Z-G-1R-8-8-PA6-W1: RNCC: 2 | RNVC: 2
HRZ1A1 8-8PASTZN: RNCC: 3 | RNVC: 2
RBNR-108/8 UND DP-B1: RNCC: 3 | RNVC: 2
108/08PA-GD-AS: RNCC: 3 | RNVC: 2
108/08PA-GD: RNCC: 5 | RNVC: 2
RBNR-108/8 UND DP-B1: RNCC: 5 | RNVC: 2
DIN3015-Z-G-1R-8-8-PA-W1: RNCC: 5 | RNVC: 2
DIN3015-ZG1R-8-8PA: RNCC: 5 | RNVC: 2

6 Jul 1990

5340-12-389-0716
Expansion Shield

123890716
NO PRIMARY REF 12-389-0716: RNCC: 3 | RNVC: 2
924206: RNCC: 5 | RNVC: 2
07402026: RNCC: 5 | RNVC: 2
924206: RNCC: 5 | RNVC: 2
2500600743: RNCC: 5 | RNVC: 2

24 May 2012

5340-12-196-6577
Clamping Catch

121966577
602-MM: RNCC: 3 | RNVC: 2
602MM: RNCC: 5 | RNVC: 2
602MM: RNCC: 5 | RNVC: 2

28 Jul 1983

5340-12-135-6799
Snap Hook

121356799
DIN5299-C160ZN: RNCC: 2 | RNVC: 2
DIN5299-C160-ZN: RNCC: 3 | RNVC: 2
245-160X13 VERZINKT: RNCC: 3 | RNVC: 9
C160DIN5299GALZN6GL: RNCC: 5 | RNVC: 2
C160DIN5299VERZINKT: RNCC: 5 | RNVC: 2
C160DIN5299VZK: RNCC: 5 | RNVC: 2
245-160X13VERZINKT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-355-9507
Mending Plate

123559507
J92220705-003: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-176-9810
Loop Clamp

121769810
PAN4263-100: RNCC: 3 | RNVC: 2

3 Jan 1979

5340-12-197-8069
Angle Bracket

121978069
6.226.0.982.032.4: RNCC: 3 | RNVC: 2
6-226-0-982-032-4: RNCC: 5 | RNVC: 9
6.226.0.982.032.4: RNCC: 5 | RNVC: 9

23 Nov 1983

5340-12-196-9552
Double Angle Bracket

121969552
A-295131-403: RNCC: 3 | RNVC: 2
A295131-403: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-305-2791
Swivel Caster

123052791
6.435-026.0: RNCC: 3 | RNVC: 2
6-435-026: RNCC: 5 | RNVC: 9
6.435-026: RNCC: 5 | RNVC: 9
F300 0T 001 4241: RNCC: 6 | RNVC: 9

16 Oct 1985

5340-12-355-7302
Headless Straight Rod

123557302
P-876407-001: RNCC: 3 | RNVC: 2
P876407-001: RNCC: 5 | RNVC: 2

11 Dec 2001

5340-12-134-6398
Cremone Bolt

121346398
VG75121-OBEN490,0 UNTEN 703,0 MM: RNCC: 2 | RNVC: 2
2512-37-30: RNCC: 5 | RNVC: 9
AVDA751210BEN490UNTEN703: RNCC: 5 | RNVC: 9
VG751210BEN490UNTEN703: RNCC: 5 | RNVC: 9
4430BEN490UNTEN703: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-7626
Spring Tension Clip

121987626
2500082-198400.02.0: RNCC: 3 | RNVC: 2
2500082-198400-02-0: RNCC: 5 | RNVC: 2
2500082-198400-02-0: RNCC: 5 | RNVC: 9
2500082-198400.02.0: RNCC: 5 | RNVC: 9

23 Feb 1984

5340-12-315-1176
Angle Bracket

123151176
C249-A33-C21: RNCC: 2 | RNVC: 2
C249-A33-C21: RNCC: 3 | RNVC: 2

17 Sep 1988

5340-12-161-8889
Nonmetallic Bumper

121618889
2360-012416.01.0: RNCC: 2 | RNVC: 2
2360-012416-01-0: RNCC: 5 | RNVC: 2
2360-012416.01.0: RNCC: 5 | RNVC: 2
2360-012416.01.0: RNCC: 5 | RNVC: 2
2360-012416-01-0: RNCC: 5 | RNVC: 9
2360-012416.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-152-8296
Dust And Moisture Seal Protective Cap

121528296
97004-010: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-359-6772
Angle Bracket

123596772
2500261-180000.217.0: RNCC: 2 | RNVC: 2
2500261-180000.217.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-167-0476
Loop Clamp

121670476
DIN3016-2-G1-61X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-61X15-W1-2: RNCC: 3 | RNVC: 2
SP61/15SKZ: RNCC: 3 | RNVC: 2
DIN3016-G1-61X15-W1-2: RNCC: 5 | RNVC: 2
1410000061: RNCC: 5 | RNVC: 2
SP61-15SKZ: RNCC: 5 | RNVC: 2
VG95931-G61X15-W1: RNCC: 5 | RNVC: 9
VG95931G61X15W1: RNCC: 5 | RNVC: 9

13 Nov 1976

5340-12-302-0944
Webbing Strap

123020944
79017/026/077-0370-0100: RNCC: 3 | RNVC: 2
79017/026/077-370-100: RNCC: 5 | RNVC: 2
220-00-0053-3: RNCC: 5 | RNVC: 2

1 Dec 1984

5340-12-313-0184
Double Angle Bracket

123130184
P-086148-004: RNCC: 3 | RNVC: 2
P086148-004: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-309-7009
Nonmetallic Bumper

123097009
DIN95364-A75X52-NR65ST-M12X37: RNCC: 2 | RNVC: 2
81130-75X52-M12X37.NR65.ST: RNCC: 5 | RNVC: 2
25336/D-BSTN6590: RNCC: 5 | RNVC: 2
1.75.52.4.65NR/ST-M12X37: RNCC: 5 | RNVC: 2
25336-D-65SHORE: RNCC: 5 | RNVC: 2
811.030.075.052.12X37.NR65.ST: RNCC: 5 | RNVC: 2
25336/D-SM650: RNCC: 5 | RNVC: 2
25336/D-SM650: RNCC: 5 | RNVC: 2
VG95364-A75X52-NR65ST-M12X37: RNCC: 5 | RNVC: 9
VG95364-A75X52-M12X37-NR65ST: RNCC: 5 | RNVC: 9

18 Feb 1987

5340-12-319-3344
Access Cover

123193344
2300232-182410.000.0: RNCC: 2 | RNVC: 2
2300232-182410.000.0: RNCC: 3 | RNVC: 2
2300232-182410.000.02: RNCC: 5 | RNVC: 9

25 Sep 1989

5340-12-350-3306
Angle Bracket

123503306
VG95211-ML-123503306: RNCC: 2 | RNVC: 2
160-714619-01: RNCC: 3 | RNVC: 2

16 Mar 2000

5340-12-386-2642
Access Cover

123862642
2500261-183750.000.0: RNCC: 2 | RNVC: 2
2500261-183750.000.0: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-12-318-5700
Bow Handle

123185700
3.268.1303: RNCC: 3 | RNVC: 2
614-007: RNCC: 5 | RNVC: 2

28 Jul 1989

5340-12-307-5836
Mending Plate

123075836
2500179-000000.006.0: RNCC: 2 | RNVC: 2
2500179-000000.006.0: RNCC: 3 | RNVC: 2

4 Jul 1986

5340-12-701-3752
Mounting Plate

127013752
VG95211-ML-127013752: RNCC: 2 | RNVC: 2
5.12.5305.0333.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-4223
Angle Bracket

127024223
VG95211-ML-127024223: RNCC: 2 | RNVC: 2
5.12.7205.1080.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-703-0711
Pawl Fastener

127030711
VG95211-ML-127030711: RNCC: 2 | RNVC: 2
2AW.7820.280-9: RNCC: 3 | RNVC: 2
0500810071299: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-318-4431
Loop Clamp

123184431
DIN71555-32,2ZN: RNCC: 2 | RNVC: 2
DIN71555-32,2ZN: RNCC: 3 | RNVC: 2
DIN71555-32,2ZN: RNCC: 5 | RNVC: 2
DIN71555-32,2ZN: RNCC: 5 | RNVC: 2
DIN71555-32,2-VERZINKT: RNCC: 5 | RNVC: 2
DIN71555-32,2-VERZINKT: RNCC: 5 | RNVC: 2
6-475-0102: RNCC: 5 | RNVC: 2
DIN71555-32,2ZN: RNCC: 5 | RNVC: 2

14 Jul 1989

5340-12-183-7669
Retaining Strap

121837669
2211028706: RNCC: 3 | RNVC: 2
5801506-7482-000: RNCC: 5 | RNVC: 2
5801506-7482-000: RNCC: 5 | RNVC: 9
22110 28706: RNCC: 5 | RNVC: 9

20 May 1980

5340-12-330-7052
Mounting Bracket

123307052
1865-010910.00.0: RNCC: 3 | RNVC: 9
1865-010910.00.0: RNCC: 3 | RNVC: 9

28 Jan 1993

5340-12-166-8019
Friction Catch Stud Receptacle

121668019
603D034: RNCC: 3 | RNVC: 2
3439718: RNCC: 5 | RNVC: 2
03439718: RNCC: 5 | RNVC: 2
603K0089-1: RNCC: 5 | RNVC: 2
3439718EZ5505-04: RNCC: 5 | RNVC: 2

21 Oct 1976

Load More Results