What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 152 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 152 of 178

5340-12-359-0514
Manual Control Lever

123590514
0008354043: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-368-1775
Nonmetallic Bumper

123681775
9705040112: RNCC: 3 | RNVC: 2

29 Dec 2005

5340-12-337-9859
Access Cover

123379859
230-111.26: RNCC: 3 | RNVC: 2
PK-HH-158: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-308-3879
Nonmetallic Bumper

123083879
86012953: RNCC: 3 | RNVC: 2
86012953ED5058-04: RNCC: 5 | RNVC: 2

3 Oct 1986

5340-12-158-1588
Compression Cup

121581588
BFA415-400-80-53NBR/252: RNCC: 3 | RNVC: 2
BFA415-400-80-53NBR252: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-189-4471
Helical Compression Spring Seat

121894471
F1141472-0005: RNCC: 3 | RNVC: 2
F11.41472-0005: RNCC: 5 | RNVC: 2
F11.41472-0005: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-12-378-0704
Mounting Bracket

123780704
320.001-071: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-311-5080
Headless Straight Rod

123115080
619-53.73.111-05: RNCC: 3 | RNVC: 2

11 Sep 1987

5340-12-702-6350
Angle Bracket

127026350
VG95211-ML-127026350: RNCC: 2 | RNVC: 2
84-7601-160: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-315-2820
Mending Plate

123152820
5802121-000000.01: RNCC: 2 | RNVC: 2
65.7789.460.01-A001: RNCC: 3 | RNVC: 2

8 Oct 1988

5340-12-343-2045
Metallic Solid Wheel

123432045
5502-543: RNCC: 3 | RNVC: 2

16 May 1997

5340-12-199-0298
Mending Plate

121990298
C42165-A151-C129: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-12-328-4861
Electrical-Mechanical Equipment Post

123284861
C42080-A32-C30: RNCC: 2 | RNVC: 2
C42080-A32-C30: RNCC: 3 | RNVC: 2

23 May 1992

5340-12-350-8203
Mechanical Stop

123508203
NO PRIMARY REF 12-350-8203: RNCC: 3 | RNVC: 2
765-64-SB206: RNCC: 5 | RNVC: 9

25 May 2000

5340-12-323-9375
Resilient Mount

123239375
914-4A: RNCC: 3 | RNVC: 2
7039428: RNCC: 5 | RNVC: 2

10 Jan 1991

5340-12-701-9962
Loop Clamp

127019962
VG95211-ML-127019962: RNCC: 2 | RNVC: 2
155N464-681: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-333-8969
Ball Socket Seat

123338969
3142620076: RNCC: 3 | RNVC: 2
314-262-0076: RNCC: 5 | RNVC: 2

22 Feb 1994

5340-12-317-0186
Access Cover

123170186
610.10-10-04-00-000: RNCC: 2 | RNVC: 2
610.10-10-04-00-000: RNCC: 3 | RNVC: 2

3 Mar 1989

5340-12-321-3024
Mounting Bracket

123213024
2300034-130700: RNCC: 2 | RNVC: 2

2 May 1990

5340-12-361-3698
Mounting Plate

123613698
51974800894: RNCC: 3 | RNVC: 2
51.97480-0894: RNCC: 5 | RNVC: 2

19 Sep 2003

5340-12-183-6656
Electrical-Mechanical Equipment Post

121836656
5801517-1000-024: RNCC: 3 | RNVC: 2
3412028799: RNCC: 5 | RNVC: 2
5801517-1000-024: RNCC: 5 | RNVC: 9
34120 28799: RNCC: 5 | RNVC: 9

8 May 1980

5340-12-337-7744
Nonmetallic Bumper

123377744
200533: RNCC: 3 | RNVC: 2
24K03-0090-00038: RNCC: 5 | RNVC: 2
24K03-0090-00038: RNCC: 5 | RNVC: 2

10 Apr 1995

5340-12-347-2288
Dust And Moisture Seal Protective Cap

123472288
330196-0085.000: RNCC: 3 | RNVC: 2
330196-0085.000: RNCC: 5 | RNVC: 9

16 Nov 1998

5340-12-344-8066
Spacing Threaded Standoff

123448066
V22-498-7711-01: RNCC: 3 | RNVC: 2

10 Dec 1997

5340-12-300-9865
Mending Plate

123009865
5801884-3010: RNCC: 2 | RNVC: 2
7802065500: RNCC: 3 | RNVC: 2
78020 65500: RNCC: 5 | RNVC: 9

15 Sep 1984

5340-12-333-2016
Lock-Release Lever

123332016
00098389570: RNCC: 3 | RNVC: 9
328-182703.000: RNCC: 5 | RNVC: 9
9838957: RNCC: 5 | RNVC: 9

9 Nov 1993

5340-12-311-7675
Catch Strike

123117675
A29-357: RNCC: 3 | RNVC: 2
7409524: RNCC: 5 | RNVC: 2

15 Oct 1987

5340-12-191-8491
Dust And Moisture Seal Protective Cap

121918491
3B50778: RNCC: 3 | RNVC: 2
42485724: RNCC: 5 | RNVC: 2
42485724EY5078-28: RNCC: 5 | RNVC: 2

15 Mar 1982

5340-12-365-3894
Access Cover

123653894
2500267-190061.000.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-350-3308
Mounting Bracket

123503308
VG95211-ML-123503308: RNCC: 2 | RNVC: 2
160-714620: RNCC: 3 | RNVC: 2

16 Mar 2000

5340-12-196-7237
Loop Clamp

121967237
NMC-CL141N-3: RNCC: 3 | RNVC: 9
MMCCL141N3: RNCC: 5 | RNVC: 9

8 Aug 1983

5340-12-168-5477
Helical Compression Spring Retainer

121685477
WW405969A: RNCC: 3 | RNVC: 9
WW405969A: RNCC: 5 | RNVC: 2
WW 405 969 A: RNCC: 5 | RNVC: 2
WW405969A: RNCC: 5 | RNVC: 2
WW 405 969 A: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-387-4326
Manual Control Handle

123874326
1030229-171000.009.0: RNCC: 3 | RNVC: 2

15 Dec 2011

5340-12-177-2128
Detent Plunger

121772128
3223530049: RNCC: 3 | RNVC: 2

19 Jan 1979

5340-12-127-5078
Federkraft- Klipp

5340-12-127-5471
Band- Scharnier

5340-12-134-0479
Augplatte

5340-12-305-4126
Federkraft- Klipp

5340-12-130-4704
Spannschlosz

5340-12-343-2872
Angle Bracket

123432872
0415 4923: RNCC: 3 | RNVC: 2
04154923EC0150-51: RNCC: 5 | RNVC: 2
04154923: RNCC: 5 | RNVC: 2

28 May 1997

5340-12-123-3655
Retaining Clip

121233655
81976400015: RNCC: 3 | RNVC: 2
00.00480-0488: RNCC: 5 | RNVC: 2
00004800488: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-355-3419
Rigid Caster

123553419
32/125/3LN: RNCC: 3 | RNVC: 2
0580.1950: RNCC: 5 | RNVC: 2

6 Nov 2001

5340-12-358-8861
Loop Clamp

123588861
RSGU1.33/20: RNCC: 3 | RNVC: 2
4730700141: RNCC: 5 | RNVC: 2

26 Nov 2002

5340-12-341-9287
Mounting Plate

123419287
313021: RNCC: 3 | RNVC: 2
37G17-0047-00.002: RNCC: 5 | RNVC: 2
C40165-A373-C46: RNCC: 5 | RNVC: 9

16 Nov 1996

5340-12-177-6157
Double Angle Bracket

121776157
2300002-151180.004: RNCC: 2 | RNVC: 2
2300002-151180.004: RNCC: 3 | RNVC: 2
2300002-151180-004: RNCC: 5 | RNVC: 9
2300002-151180.004: RNCC: 5 | RNVC: 9

9 Feb 1979

5340-12-352-6308
Flush Bolt

123526308
3101-0002: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-352-6324
Webbing Strap

123526324
8310-0011: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-346-9503
Nonmetallic Bumper

123469503
2500213-15.03.07: RNCC: 2 | RNVC: 2
2500213-15.03.07: RNCC: 3 | RNVC: 2

1 Oct 1998

5340-12-193-9628
Turnbuckle

121939628
20-7460-002: RNCC: 3 | RNVC: 2

20 Sep 1982

5340-12-368-1329
Mounting Plate

123681329
5161-380100A01B: RNCC: 2 | RNVC: 2
5161-380100A01B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-702-0505
Angle Bracket

127020505
VG95211-ML-127020505: RNCC: 2 | RNVC: 2
2746A-12CHIM.PAS.: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-124-0779
Turnbuckle Body

121240779
DIN1480-M10: RNCC: 2 | RNVC: 2
SPMU-DIN1480-M10-ROH: RNCC: 3 | RNVC: 2
3300010S: RNCC: 5 | RNVC: 2
01115382: RNCC: 5 | RNVC: 2
01115383: RNCC: 5 | RNVC: 2
1115382EY8821-31: RNCC: 5 | RNVC: 2
BM10X125DIN1480: RNCC: 5 | RNVC: 2
SPM10DIN1480: RNCC: 5 | RNVC: 2
DIN1480-SPM10-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-357-4038
Double Angle Bracket

123574038
J27420219-401: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-12-356-7049
Retaining Strap

123567049
33036-003-052: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-342-1948
Angle Bracket

123421948
347-150-023A: RNCC: 3 | RNVC: 2

30 Dec 1996

5340-12-702-2054
Mounting Bracket

127022054
VG95211-ML-127022054: RNCC: 2 | RNVC: 2
30.7211.330: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-302-8305
Angle Bracket

123028305
4900123-1000.04: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-390-5507
Dust And Moisture Seal Boot

123905507
A77-0527: RNCC: 3 | RNVC: 2

23 Nov 2012

5340-12-309-6957
Pipe Bracket

123096957
SPGU6025.167/30SK: RNCC: 3 | RNVC: 2
774208477: RNCC: 5 | RNVC: 2
1816025167: RNCC: 5 | RNVC: 2

17 Feb 1987

5340-12-353-2155
Eye Hook

123532155
16001504: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-322-8132
Lock-Release Lever

123228132
4602601: RNCC: 3 | RNVC: 2

25 Sep 1990

5340-12-320-0668
Electrical-Mechanical Equipment Post

123200668
3512 712 54300: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-12-305-7621
Access Cover

123057621
106005: RNCC: 3 | RNVC: 2

10 Dec 1985

5340-12-311-8846
Dust And Moisture Seal Protective Cap

123118846
162437: RNCC: 2 | RNVC: 2
162437: RNCC: 3 | RNVC: 2
162437: RNCC: 5 | RNVC: 9

27 Oct 1987

5340-12-365-5944
Mounting Bracket

123655944
T251M4001201: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-198-0501
Electrical-Mechanical Equipment Post

121980501
43711398-601: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-384-1249
Pipe Hanger

123841249
12.40.63: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-12-136-7147

5340-12-027-9021

5340-12-025-5460

5340-12-393-3049
Bumper

123933049
26106-01500855: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-336-1621
Loop Clamp

123361621
DIN3016-1-A1-21X15-W5: RNCC: 2 | RNVC: 2
RS1.21/15-W5: RNCC: 3 | RNVC: 2
DIN3016-A1-21X15-W5: RNCC: 3 | RNVC: 2
RS1.21/15-1.4571: RNCC: 5 | RNVC: 2
RS1.21/15W5: RNCC: 5 | RNVC: 2
0745252009: RNCC: 5 | RNVC: 2
DIN3016-A1-21X15-W5: RNCC: 5 | RNVC: 9

2 Nov 1994

5340-12-384-9046
Hand Crank

123849046
F1.1787-30-10-00.95-00: RNCC: 3 | RNVC: 2

8 Apr 2011

5340-12-167-5480
Catch Strike

121675480
3554254: RNCC: 3 | RNVC: 2
3554254: RNCC: 5 | RNVC: 2
2852-8234-00: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-178-3115
Dust And Moisture Seal Protective Cap

121783115
097121-414Y: RNCC: 3 | RNVC: 2
97121-414Y: RNCC: 5 | RNVC: 2
97121-414Y: RNCC: 5 | RNVC: 9
97121-414Y: RNCC: 5 | RNVC: 9
097121-414Y: RNCC: 5 | RNVC: 9

12 Apr 1979

5340-12-354-9623
Mounting Bracket

123549623
8854 100-151: RNCC: 3 | RNVC: 2

11 Sep 2001

5340-12-354-0862
Dust And Moisture Seal Protective Plug

123540862
PE-DST-12F: RNCC: 3 | RNVC: 2

1 Jun 2001

5340-12-175-8294
Handle Grip

121758294
12709-5000.001: RNCC: 2 | RNVC: 2
333008-0591.000: RNCC: 3 | RNVC: 2
12709-5000-001: RNCC: 5 | RNVC: 2
12709-5000.001: RNCC: 5 | RNVC: 2
333008-0591.000: RNCC: 5 | RNVC: 9
12709-5000-001: RNCC: 5 | RNVC: 9

23 Oct 1978

5340-12-304-7091
Nonmetallic Solid Wheel

123047091
20-6510-115: RNCC: 3 | RNVC: 2

14 Aug 1985

5340-12-701-7952
Angle Bracket

127017952
VG95211-ML-127017952: RNCC: 2 | RNVC: 2
5.12.8102.2300.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-179-9608
Loop Clamp

121799608
DIN71555-58,5-PHOSPHATIERT: RNCC: 2 | RNVC: 2
DIN71555-58,5-PHOSPHATIERT: RNCC: 3 | RNVC: 2
58,5/71555PH: RNCC: 3 | RNVC: 2
DIN71555-58-5PH0SPHATIERT: RNCC: 5 | RNVC: 2
5500200058: RNCC: 5 | RNVC: 2
58-5DIN71555PH0SPHATIERT: RNCC: 5 | RNVC: 2
071555058500: RNCC: 5 | RNVC: 2
071555058500: RNCC: 5 | RNVC: 2

10 Aug 1979

5340-12-342-5326
Access Door

123425326
2300421-181930.000.4: RNCC: 2 | RNVC: 2
9915620.4: RNCC: 3 | RNVC: 9
2300421-181930.000.4: RNCC: 5 | RNVC: 2
2300421-181930.000.4: RNCC: 5 | RNVC: 9

25 Feb 1997

5340-12-385-4330
Dust And Moisture Seal Protective Plug

123854330
840915: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-336-7081
Pawl Fastener

123367081
M30755: RNCC: 3 | RNVC: 2
M30755: RNCC: 5 | RNVC: 9

12 Dec 1994

5340-12-345-4466
Mounting Bracket

123454466
54.0053.448.12: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-12-310-4327
Butt Hinge Leaf

123104327
4252601662: RNCC: 3 | RNVC: 2
4252601662: RNCC: 5 | RNVC: 2

21 May 1987

5340-12-371-6895
Clamping Catch

123716895
P70129300001: RNCC: 3 | RNVC: 2

7 May 2007

5340-12-319-5454
Mounting Bracket

123195454
01061700: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-12-391-5986
Mounting Bracket

123915986
S252M3176107: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-12-354-3180
Mortise Lock

123543180
523.000.012: RNCC: 3 | RNVC: 2
523.000.012: RNCC: 5 | RNVC: 2

2 Jul 2001

5340-12-382-0896
Expansion Plug

123820896
4079975020: RNCC: 3 | RNVC: 2

6 May 2010

5340-12-307-3653
Nonmetallic Bumper

123073653
3757540: RNCC: 3 | RNVC: 2
3757540: RNCC: 3 | RNVC: 2
3757540: RNCC: 5 | RNVC: 2

10 Jun 1986

5340-12-026-1761

5340-12-040-0864

5340-12-305-1132
Mending Plate

123051132
4900059-211470.001.0: RNCC: 3 | RNVC: 2
1219672: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-354-6705
Double Angle Bracket

123546705
5.034-468.0: RNCC: 3 | RNVC: 2

14 Aug 2001

5340-12-375-1660
Filler Opening Cap

123751660
82122100014: RNCC: 3 | RNVC: 2
82.12210-0014: RNCC: 5 | RNVC: 2
82.12210.0014: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-12-198-4042
Butt Hinge

121984042
5800045-1620.01: RNCC: 3 | RNVC: 2

25 Jan 1984

5340-12-362-7655
Nonmetallic Bumper

123627655
S880M00X1005: RNCC: 3 | RNVC: 2

30 Mar 2004

5340-12-343-8629
Mounting Bracket

123438629
M29152: RNCC: 3 | RNVC: 2
M29152: RNCC: 5 | RNVC: 9

6 Aug 1997

5340-12-193-2670
Detent Plunger

121932670
3740047171: RNCC: 3 | RNVC: 2
8690940260: RNCC: 5 | RNVC: 2

6 Jul 1982

5340-12-347-7079
Mounting Bracket

123477079
300.009.381: RNCC: 2 | RNVC: 2
300.009.381: RNCC: 3 | RNVC: 2
300.009 381: RNCC: 5 | RNVC: 2

1 Feb 1999

5340-12-303-1757
Angle Bracket

123031757
1280505-41.001: RNCC: 3 | RNVC: 2

1 Mar 1985

5340-12-300-2252
Mending Plate

123002252
7110401: RNCC: 3 | RNVC: 2

14 Jul 1984

5340-12-339-1259
Mounting Bracket

123391259
3644660640: RNCC: 3 | RNVC: 2

12 Oct 1995

5340-12-194-1035
Dust And Moisture Seal Protective Cap

121941035
072129719A: RNCC: 3 | RNVC: 2

4 Oct 1982

5340-12-330-8962
Lock-Release Lever

123308962
480-7346-02-11-02: RNCC: 3 | RNVC: 2
480/7346-02-11-02: RNCC: 5 | RNVC: 2

23 Feb 1993

5340-12-179-2920
Halter

121792920
001-218.016-017: RNCC: 3 | RNVC: 2
1218-16-17: RNCC: 5 | RNVC: 2
001-218-016-017: RNCC: 5 | RNVC: 9
1218-16-17: RNCC: 5 | RNVC: 9
1218-16.17: RNCC: 5 | RNVC: 9

20 Jun 1979

5340-12-337-0212
Snap Hook

123370212
1600001-1160: RNCC: 2 | RNVC: 2
675-1160: RNCC: 3 | RNVC: 2
1600001-1160: RNCC: 5 | RNVC: 2

11 Jan 1995

5340-12-165-6506
Nonmetallic Bumper

121656506
03457755: RNCC: 3 | RNVC: 2
3457755EF6203-15: RNCC: 5 | RNVC: 2
6203-15-01-06: RNCC: 5 | RNVC: 2
6203-15-01.06: RNCC: 5 | RNVC: 2
F6203-15-01-06: RNCC: 5 | RNVC: 2

11 Jun 1976

5340-12-349-0147
Access Cover

123490147
245/7346-49-00-08: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-12-367-0441
Mounting Bracket

123670441
PIKTVF30/30: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-12-169-1964
Clamping Catch

121691964
53-1184-062-00: RNCC: 3 | RNVC: 2

22 Apr 1977

5340-12-345-2855
Runner

123452855
615.313-4: RNCC: 3 | RNVC: 2
615-313-4: RNCC: 5 | RNVC: 2
6600149-2.10: RNCC: 5 | RNVC: 2

25 Feb 1998

5340-12-378-3682
Clamping Catch

123783682
0000335769: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-701-8498
Loop Clamp

127018498
VG95211-ML-127018498: RNCC: 2 | RNVC: 2
5191A-50: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-8521
Loop Clamp

127008521
VG95211-ML-127008521: RNCC: 2 | RNVC: 2
155N1119-368: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-349-7493
Mounting Bracket

123497493
106120: RNCC: 3 | RNVC: 2
WEW35/2: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-12-306-6868
Swivel Caster

123066868
157L/RU/L125G: RNCC: 3 | RNVC: 2
151J/RU/L125G: RNCC: 5 | RNVC: 2
151K/RU/L125G: RNCC: 5 | RNVC: 2

20 Mar 1986

5340-12-159-6770
Loop Clamp

121596770
DIN71555-53,5ZN: RNCC: 2 | RNVC: 2
DIN71555-53,5ZN: RNCC: 3 | RNVC: 2
DIN71555-53,5ZN: RNCC: 3 | RNVC: 2
DIN71555-53,5ZN: RNCC: 5 | RNVC: 2
DIN71555-53,5ZN: RNCC: 5 | RNVC: 2
53-5DIN71555R0H: RNCC: 5 | RNVC: 9
DIN71555-53,5: RNCC: 5 | RNVC: 9
53-5DIN71555: RNCC: 5 | RNVC: 9
DIN71555-53-5: RNCC: 5 | RNVC: 9
53,5/71555BL: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-366-3328
Mounting Plate

123663328
P-085065-756: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-12-374-9724
Mechanic Equipment Hardware Kit

123749724
279.662 523: RNCC: 3 | RNVC: 2

10 Apr 2008

5340-12-323-2466
Mounting Bracket

123232466
6030980439: RNCC: 3 | RNVC: 2

7 Nov 1990

5340-12-353-1908
Runner

123531908
AFG0705020: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-12-011-5392

5340-12-356-2629
Mounting Bracket

123562629
2125-125000.22B: RNCC: 2 | RNVC: 2
2125-125000.22B: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-12-300-3441
Butt Hinge

123003441
6100128-0000.003: RNCC: 2 | RNVC: 2
4303610014: RNCC: 3 | RNVC: 2

26 Jul 1984

5340-12-328-4714
Electrical-Mechanical Equipment Post

123284714
C42080-A34-C17: RNCC: 2 | RNVC: 2
C42080-A34-C17: RNCC: 3 | RNVC: 2

22 May 1992

5340-12-356-0880
Mounting Bracket

123560880
J92228832-001: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-368-1321
Mounting Plate

123681321
5161-340200A01B: RNCC: 2 | RNVC: 2
5161-340200A01B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-319-6562
Rod End Clevis

123196562
412475: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-12-331-8446
Mounting Bracket

123318446
160-27131: RNCC: 3 | RNVC: 2
160-27131: RNCC: 5 | RNVC: 9

28 Jun 1993

5340-12-316-6651
Dust And Moisture Seal Protective Cap-Plug

123166651
1900508002: RNCC: 3 | RNVC: 2
0130 6934: RNCC: 5 | RNVC: 2
1900508002: RNCC: 5 | RNVC: 2

31 Jan 1989

5340-12-122-6327
Retaining Strap

121226327
1391303000: RNCC: 3 | RNVC: 2
WSBE38Z1X: RNCC: 5 | RNVC: 2
0009950010: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-178-3031
Dust And Moisture Seal Protective Cap

121783031
3213340225: RNCC: 3 | RNVC: 2

12 Apr 1979

5340-12-181-7959
Clamping Catch

121817959
PAN5114: RNCC: 3 | RNVC: 2

17 Dec 1979

5340-12-351-8279
Multiple Angle Bracket

123518279
J28630042-401: RNCC: 3 | RNVC: 2

30 Aug 2000

5340-12-174-3371
Electrical-Mechanical Equipment Post

121743371
52-0164-000-01: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-12-188-3504
Resilient Mount

121883504
H64-BAM-10: RNCC: 3 | RNVC: 2
H64-BAM-10: RNCC: 5 | RNVC: 9
H64BAM10: RNCC: 5 | RNVC: 9

2 Jul 1981

5340-12-311-9459
Plain Solid Disk

123119459
F11.11341-0001: RNCC: 3 | RNVC: 2

2 Nov 1987

5340-12-347-3521
Double Angle Bracket

123473521
2300387-151305.000: RNCC: 2 | RNVC: 2
2300387-151305.000: RNCC: 3 | RNVC: 2
2300387-151305.000: RNCC: 5 | RNVC: 9
9903980: RNCC: 5 | RNVC: 9

1 Dec 1998

5340-12-309-0019
Resilient Mount

123090019
E1T 2569-03: RNCC: 3 | RNVC: 2
E1T 2569-03: RNCC: 3 | RNVC: 2
E1T2569-03: RNCC: 5 | RNVC: 2

5 Dec 1986

5340-12-339-8594
Angle Bracket

123398594
5800748-11251: RNCC: 3 | RNVC: 2

25 Jan 1996

5340-12-323-0934
Support Hook

123230934
B-228618: RNCC: 3 | RNVC: 2

23 Oct 1990

5340-12-316-4765
Bow Handle

123164765
5600023-190255.000.0: RNCC: 2 | RNVC: 2
5600023-190255.000.0: RNCC: 3 | RNVC: 2
22014.0.08.750.00: RNCC: 5 | RNVC: 2
1271855: RNCC: 5 | RNVC: 2
22014.0.08.750.00: RNCC: 5 | RNVC: 9

19 Jan 1989

5340-12-171-5180
Loop Clamp

121715180
DIN3016-1-B1-90X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-B1-90X20-W1-2: RNCC: 3 | RNVC: 2
RS0.90/20: RNCC: 3 | RNVC: 2
4100020090: RNCC: 5 | RNVC: 2
RS90-20: RNCC: 5 | RNVC: 2
RS90/20: RNCC: 5 | RNVC: 2
DIN3016-B1-90X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-B90X20-W1: RNCC: 5 | RNVC: 9
VG95931B90X20W1: RNCC: 5 | RNVC: 9

20 Oct 1977

5340-12-195-4159
Rim Lock

121954159
1034-U1: RNCC: 3 | RNVC: 2
229-9101: RNCC: 3 | RNVC: 2
16 01 28: RNCC: 5 | RNVC: 2
7.27.093.00: RNCC: 5 | RNVC: 9

21 Feb 1983

5340-12-700-3036
Double Angle Bracket

127003036
51-262242004: RNCC: 2 | RNVC: 2
765.41.133: RNCC: 3 | RNVC: 2
765-41-133: RNCC: 5 | RNVC: 9

6 Dec 1991

5340-12-316-5752
Escutcheon Plate

123165752
6645-AL: RNCC: 3 | RNVC: 2
GSV6645-AL: RNCC: 5 | RNVC: 9

25 Jan 1989

5340-12-354-0144
Verriegelun Buegel

123540144
AFG072209-01: RNCC: 3 | RNVC: 2

29 May 2001

5340-12-301-1654
Angle Bracket

123011654
A-243849-001: RNCC: 3 | RNVC: 2
A243849-001: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-192-9247
Butt Hinge

121929247
4608800228: RNCC: 3 | RNVC: 2
721 1 69 040 0: RNCC: 5 | RNVC: 9

7 Jun 1982

5340-12-197-3469
Mending Plate

121973469
4-014-11/24000.03: RNCC: 3 | RNVC: 2
4-014-11/24000.03: RNCC: 5 | RNVC: 9

13 Oct 1983

5340-12-179-2742
Bow Handle

121792742
CF311 471-X: RNCC: 2 | RNVC: 2
CF 311 471 -X: RNCC: 3 | RNVC: 2
CF 311 471 -X: RNCC: 5 | RNVC: 2
CF 311 471 -X: RNCC: 5 | RNVC: 2
CF3114710X: RNCC: 5 | RNVC: 9
CF3114710X: RNCC: 5 | RNVC: 9
CF3114710X: RNCC: 5 | RNVC: 9

20 Jun 1979

5340-12-193-7589
Angle Bracket

121937589
4163130142: RNCC: 3 | RNVC: 2

26 Aug 1982

5340-12-187-9954
Loop Clamp

121879954
03165500: RNCC: 3 | RNVC: 2
91788880: RNCC: 5 | RNVC: 2
03165500: RNCC: 5 | RNVC: 2
03165500.135: RNCC: 5 | RNVC: 9
132411: RNCC: 5 | RNVC: 9

25 May 1981

5340-12-321-9115
Angle Bracket

123219115
GLZ9300273R1: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-12-375-7416
Quick Release Plunger

123757416
2204.008: RNCC: 3 | RNVC: 2
EH2204.008: RNCC: 5 | RNVC: 2

1 Jul 2008

5340-12-368-5551
Vent Plug

123685551
250210506: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-12-368-6383
Flush Lock

123686383
101827: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-12-042-0481

5340-12-360-6267
Mounting Plate

123606267
D0101736: RNCC: 3 | RNVC: 2
22875 28114: RNCC: 5 | RNVC: 2

18 Jun 2003

5340-12-180-2146
Catch Strike

121802146
01236700: RNCC: 3 | RNVC: 2
1236700KZ8935-38: RNCC: 5 | RNVC: 2
N92032B3: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-353-1909
Hand Crank

123531909
BHAA011: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-12-307-3449
Gummi- Riemen

123073449
1505 325: RNCC: 3 | RNVC: 2

6 Jun 1986

5340-12-324-0613
Dust And Moisture Seal Protective Cap

123240613
4270700055: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-12-350-3407
Mounting Bracket

123503407
VG95211-ML-123503407: RNCC: 2 | RNVC: 2
160-88320-09: RNCC: 3 | RNVC: 2
160-88320-09: RNCC: 5 | RNVC: 9

17 Mar 2000

5340-12-181-4078
Access Cover

121814078
2H050-0806-02: RNCC: 3 | RNVC: 2

22 Nov 1979

5340-12-180-5727
Angle Bracket

121805727
C320-A62-C88: RNCC: 2 | RNVC: 2
C320A62C88: RNCC: 3 | RNVC: 2
C320-A62-C88: RNCC: 5 | RNVC: 2
C320-A62-C88: RNCC: 5 | RNVC: 2
C320A62C88: RNCC: 5 | RNVC: 2

19 Sep 1979

5340-12-150-3343
Angle Bracket

121503343
C20170-A82-C82: RNCC: 3 | RNVC: 2
C20170A82C82: RNCC: 5 | RNVC: 2
TFS72-33082: RNCC: 5 | RNVC: 9
TGRPL82T82: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-355-7141
Metallic Solid Wheel

123557141
2125-121040A02B: RNCC: 2 | RNVC: 2
2125-121040A02B: RNCC: 3 | RNVC: 2

10 Dec 2001

5340-12-179-8210
Nut And Bolt Locking Plate

121798210
103-250-0042-000: RNCC: 3 | RNVC: 2
351-002-623120-010-0: RNCC: 5 | RNVC: 2

3 Aug 1979

5340-12-702-4229
Angle Bracket

127024229
VG95211-ML-127024229: RNCC: 2 | RNVC: 2
5.12.7206.1693.02: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-174-3864
Nonmetallic Bumper

121743864
23223-066500.00.0: RNCC: 2 | RNVC: 2
23223-066500.00.0: RNCC: 3 | RNVC: 2
23223-066500-00-0: RNCC: 5 | RNVC: 2
23223-066500.00.0: RNCC: 5 | RNVC: 2
23223-066500-00-0: RNCC: 5 | RNVC: 9
23223-066500.00.0: RNCC: 5 | RNVC: 9

29 Jun 1978

5340-12-304-5676
Dust And Moisture Seal Protective Plug

123045676
2095.24.0.855: RNCC: 3 | RNVC: 2
6.622.21.231: RNCC: 5 | RNVC: 2
31511013: RNCC: 5 | RNVC: 2
101179: RNCC: 5 | RNVC: 2
2095240855: RNCC: 5 | RNVC: 2

31 Jul 1985

5340-12-365-3333
Mechanical Stop

123653333
2500267-331100.010.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-302-5693
Kunst Gleitschiene

123025693
92.203.85.257: RNCC: 3 | RNVC: 2
92.203.85.25.7: RNCC: 5 | RNVC: 2
0008350080: RNCC: 5 | RNVC: 2

14 Jan 1985

5340-12-301-6633
Retaining Band

123016633
2300022-262190.00.0: RNCC: 2 | RNVC: 2
2300022-262190.00.0: RNCC: 3 | RNVC: 2
2300022-262190.00.0: RNCC: 5 | RNVC: 9

30 Oct 1984

5340-12-158-3109
Resilient Mount

121583109
DIN95363-F25X30-M6-NR55ST: RNCC: 2 | RNVC: 2
81180-25X30-M6.NR55.ST: RNCC: 5 | RNVC: 2
5L6671-001-34: RNCC: 5 | RNVC: 2
BG6-00: RNCC: 5 | RNVC: 9
N1100-42-260: RNCC: 5 | RNVC: 9
VG95363-F25X30-M6-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-195-5877
Tubular Fairlead

121955877
1264-3259.210: RNCC: 2 | RNVC: 2
1264-3259-210: RNCC: 3 | RNVC: 2
531139-0841.000: RNCC: 3 | RNVC: 2
1264-3259-210: RNCC: 5 | RNVC: 9
1264-3259.210: RNCC: 5 | RNVC: 9
531139-0841.000: RNCC: 5 | RNVC: 9

15 Mar 1983

5340-12-304-9650
Dust And Moisture Seal Protective Cap

123049650
E4-2029020: RNCC: 3 | RNVC: 2
E4-2029020: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-12-317-2810
Loop Clamp

123172810
LVT1731.02-081633: RNCC: 3 | RNVC: 2

23 Mar 1989

5340-12-319-4491
Mending Plate

123194491
54.0069.002.00: RNCC: 3 | RNVC: 2
34-088807-01: RNCC: 5 | RNVC: 2

3 Oct 1989

5340-12-177-6161
Retaining Strap

121776161
2300002-151510.002: RNCC: 2 | RNVC: 2
2300002-151510.002: RNCC: 3 | RNVC: 2
2300002-151510-002: RNCC: 5 | RNVC: 9
2300002-151510.002: RNCC: 5 | RNVC: 9

9 Feb 1979

5340-12-179-7606
Manual Control Handle

121797606
81970010275: RNCC: 3 | RNVC: 2
81.97001-0258: RNCC: 5 | RNVC: 2
81970010258: RNCC: 5 | RNVC: 2

30 Jul 1979

5340-12-180-9019
Screw Hook

121809019
111146: RNCC: 3 | RNVC: 2
ART15-50X4,4MM VERZINKT: RNCC: 5 | RNVC: 2
ART15-50X4-5MMVERZINKT: RNCC: 5 | RNVC: 2
150005044: RNCC: 5 | RNVC: 2

11 Oct 1979

5340-12-164-4689
Bow Handle

121644689
C42107A205C42: RNCC: 3 | RNVC: 2
5801218-11-002: RNCC: 5 | RNVC: 2
5801218-11.002: RNCC: 5 | RNVC: 2
C42107-A205-C42: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-361-4287
Angle Bracket

123614287
81974860890: RNCC: 3 | RNVC: 2
81.97486-0890: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-12-342-8563
Mounting Bracket

123428563
5010-089: RNCC: 3 | RNVC: 2

9 Apr 1997

5340-12-189-3185
Hand Crank Arm

121893185
33889.48503: RNCC: 3 | RNVC: 2

17 Sep 1981

5340-12-393-7817
Dust And Moisture Seal Boot

123937817
M4917235520600: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-12-338-3437
Mending Plate

123383437
1189101: RNCC: 3 | RNVC: 2
EZ11891: RNCC: 5 | RNVC: 2

26 Jun 1995

5340-12-328-9477
Protection Bellows

123289477
030 460 001 012: RNCC: 3 | RNVC: 2
0003300885: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-12-198-1910
Helical Compression Spring Retainer

121981910
1420328003: RNCC: 3 | RNVC: 2
1420328003: RNCC: 5 | RNVC: 2
VDPM00701: RNCC: 5 | RNVC: 2

28 Dec 1983

5340-12-178-6923
Retaining Strap

121786923
9XB400404-00: RNCC: 3 | RNVC: 2
400404-00: RNCC: 5 | RNVC: 2

9 May 1979

5340-12-333-2724
Mounting Plate

123332724
161712015: RNCC: 3 | RNVC: 2
16-171-2015: RNCC: 5 | RNVC: 9

18 Nov 1993

5340-12-304-8248
Resilient Mount

123048248
E1N 2527-01: RNCC: 3 | RNVC: 2
VG95365-C5-CR-AMST: RNCC: 3 | RNVC: 2
02382484: RNCC: 5 | RNVC: 2
E1N2527-01: RNCC: 5 | RNVC: 2
VG95365-C5-CR-AMST: RNCC: 5 | RNVC: 9
02382484: RNCC: 5 | RNVC: 9

28 Aug 1985

5340-12-321-7250
Access Cover

123217250
341-454-03-05: RNCC: 3 | RNVC: 2
141660: RNCC: 5 | RNVC: 2

19 Jun 1990

5340-12-199-3149
Manual Control Handle

121993149
589113: RNCC: 3 | RNVC: 2
12NAN2344: RNCC: 5 | RNVC: 2
3922-0012-589113: RNCC: 5 | RNVC: 2
0009973037: RNCC: 5 | RNVC: 2

11 Apr 1984

5340-12-170-0222
Dust And Moisture Seal Protective Cap-Plug

121700222
TL4-088: RNCC: 3 | RNVC: 2

21 Jun 1977

5340-12-310-2972
Nonmetallic Bumper

123102972
100332-019410.02: RNCC: 2 | RNVC: 2
100332-019410.02: RNCC: 3 | RNVC: 2

6 May 1987

5340-12-702-1653
Mounting Plate

127021653
VG95211-ML-127021653: RNCC: 2 | RNVC: 2
30.7060.37: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-336-6166
Webbing Strap

123366166
2500244-987220.00: RNCC: 2 | RNVC: 2
2768.06-7220.00: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-12-700-1933
Access Cover

127001933
51-260993074: RNCC: 2 | RNVC: 2
765-50-SB474: RNCC: 3 | RNVC: 2

4 Nov 1991

5340-12-325-0268
Loop Clamp

123250268
758632: RNCC: 3 | RNVC: 2
50008991-1: RNCC: 5 | RNVC: 2

23 Apr 1991

5340-12-321-3838
Angle Bracket

123213838
58R061-0-8: RNCC: 2 | RNVC: 2
58R061-0-8: RNCC: 3 | RNVC: 2

11 May 1990

5340-12-316-4006
Mending Plate

123164006
5801671-0000.09: RNCC: 2 | RNVC: 2
5801671-0000.09: RNCC: 3 | RNVC: 2
5801671-0000.09: RNCC: 5 | RNVC: 9

16 Jan 1989

5340-12-358-8239
Swivel Caster

123588239
LPA-POA 75G-FI: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-171-1879
Spring Tension Clip

121711879
A0253: RNCC: 3 | RNVC: 2
81.51540-0002: RNCC: 5 | RNVC: 2
81515400002: RNCC: 5 | RNVC: 2

16 Sep 1977

5340-12-340-6534
Mounting Bracket

123406534
5801984-208000.003.0: RNCC: 2 | RNVC: 2
5801984-208000.003.0: RNCC: 3 | RNVC: 2

18 May 1996

5340-12-369-4375
Handle Grip

123694375
2602026900: RNCC: 3 | RNVC: 2

4 Jul 2006

5340-12-322-3582
Support Hook

123223582
100013095: RNCC: 3 | RNVC: 2

15 Aug 1990

5340-12-371-3676
Mounting Plate

123713676
5562375435: RNCC: 3 | RNVC: 2

21 Mar 2007

5340-12-318-9026
Dust And Moisture Seal Protective Cap

123189026
129057: RNCC: 3 | RNVC: 2
129057: RNCC: 5 | RNVC: 2
129057: RNCC: 5 | RNVC: 9

24 Aug 1989

5340-12-315-0354
Webbing Strap

123150354
79057-450 UMFANGSLAENGE: RNCC: 3 | RNVC: 2
6.373-399.0: RNCC: 3 | RNVC: 2
01151-1-450MM UMFANGSLAENGE: RNCC: 3 | RNVC: 2
01151-1-225MM NUTZLAENGE: RNCC: 5 | RNVC: 2
01151-1-225MM: RNCC: 5 | RNVC: 2
79057-225: RNCC: 5 | RNVC: 2
79057-225 NUTZLAENGE: RNCC: 5 | RNVC: 2
6.373-399: RNCC: 5 | RNVC: 9
DIN60060-1-25X450-C3: RNCC: 5 | RNVC: 9

9 Sep 1988

5340-12-357-4927
Multiple Eye Pad

123574927
A-087118-063: RNCC: 3 | RNVC: 2
A087118-063: RNCC: 5 | RNVC: 2

26 Jun 2002

5340-12-364-4443
Access Door Hinge

123644443
2300397-189000.006.0: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-197-0217
Lock-Release Lever

121970217
BA42-5340-065: RNCC: 2 | RNVC: 2
6330.001.4: RNCC: 3 | RNVC: 2
113D309: RNCC: 5 | RNVC: 9
113E249: RNCC: 5 | RNVC: 9

12 Sep 1983

5340-12-304-9556
Nonmetallic Bumper

123049556
1-213-001-3334: RNCC: 3 | RNVC: 9
0004630465: RNCC: 5 | RNVC: 2
3840-24: RNCC: 5 | RNVC: 2

10 Sep 1985

5340-12-189-4192
Webbing Strap

121894192
151 M-R/400MM UND 550MM: RNCC: 3 | RNVC: 2
20-7320-030: RNCC: 3 | RNVC: 2
20-7320-030: RNCC: 5 | RNVC: 2
151 M-R/400MM UND 550MM: RNCC: 5 | RNVC: 9
20-7320-030: RNCC: 5 | RNVC: 9

24 Sep 1981

5340-12-362-6916
Access Cover

123626916
1A807.41-01-01-00-001: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-368-5550
Double Angle Bracket

123685550
5981-181701.000.0: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-12-365-3719
Mounting Bracket

123653719
2300425-060000.004.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-306-6613
Mending Plate

123066613
704-152330-000-8: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-12-347-4901
Mounting Plate

123474901
YN161-6141-1: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-12-368-8600
Casement Fastener

123688600
FT621110-055: RNCC: 2 | RNVC: 2
6.100.189.00: RNCC: 3 | RNVC: 2
FT621110-055: RNCC: 5 | RNVC: 2

2 May 2006

5340-12-701-2532
Mounting Plate

127012532
VG95211-ML-127012532: RNCC: 2 | RNVC: 2
5.12.4002.0222.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-388-1319
Spring Loaded Cylinder Fastener

123881319
10091-192632.000.0: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-12-393-3669
Mending Plate

123933669
4100098-982710.009.0: RNCC: 2 | RNVC: 2
4100098-982710.009.0: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-12-358-6979
Mounting Bracket

123586979
2481-391000.001.0: RNCC: 2 | RNVC: 2
2481-391000.001.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-362-0720
Mounting Bracket

123620720
1030020-180029.000.0: RNCC: 2 | RNVC: 2
1030020-180029.000.0: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-349-1777
Access Door Hinge

123491777
680003/7323-05-00-14: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-12-702-1695
Mounting Bracket

127021695
VG95211-ML-127021695: RNCC: 2 | RNVC: 2
30.7107.93: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-380-6347
Bumper

123806347
X00043052: RNCC: 3 | RNVC: 2
X00041351 ITEM 30: RNCC: 5 | RNVC: 2
X00043068 ITEM 30: RNCC: 5 | RNVC: 2

16 Nov 2009

5340-12-394-1574
Bumper

123941574
55202401: RNCC: 3 | RNVC: 2

7 Nov 2013

5340-12-346-8751
Rod End Clevis

123468751
240MM 32MM PN11: RNCC: 3 | RNVC: 2
240MM 32MM PN14: RNCC: 5 | RNVC: 9

22 Sep 1998

5340-12-159-7265
Compression Cup

121597265
H12-15-80NBR/709: RNCC: 3 | RNVC: 2
H12-15-30PA709: RNCC: 5 | RNVC: 2
H12-15-80NBR709: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-337-7741
Nonmetallic Bumper

123377741
200532: RNCC: 3 | RNVC: 2
24K03-0090-00028: RNCC: 5 | RNVC: 2
24K03-0090-00028: RNCC: 5 | RNVC: 2

10 Apr 1995

5340-12-302-8312
Metal Runner

123028312
4900123-1500.03: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-311-1100
Dust And Moisture Seal Protective Cap

123111100
BS649420-7: RNCC: 3 | RNVC: 2

28 Jul 1987

5340-12-380-9755
Mechanic Equipment Hardware Kit

123809755
82147004-3: RNCC: 3 | RNVC: 2

17 Dec 2009

5340-12-360-4770
Mounting Bracket

123604770
82003017: RNCC: 3 | RNVC: 2
82003017: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-362-7285
Nonmetallic Bumper

123627285
20.137-310: RNCC: 3 | RNVC: 9

24 Mar 2004

5340-12-144-9455
Loop Clamp

121449455
13TAN15801-3-1364-5: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-321-4581
Angle Bracket

123214581
P-886763-403: RNCC: 3 | RNVC: 2
P886763-403: RNCC: 5 | RNVC: 2

22 May 1990

5340-12-348-1442
Strap Hinge

123481442
6.372-032.0: RNCC: 3 | RNVC: 2
6.372-032: RNCC: 5 | RNVC: 9

21 Apr 1999

5340-12-198-5500
Electrical-Mechanical Equipment Post

121985500
CF432578: RNCC: 3 | RNVC: 2
CF 432 578: RNCC: 5 | RNVC: 2
CF432578: RNCC: 5 | RNVC: 2
CF 432 578: RNCC: 5 | RNVC: 2
CF432578: RNCC: 5 | RNVC: 2
CF 432 578: RNCC: 5 | RNVC: 2

8 Feb 1984

5340-12-305-8399
Ring

123058399
VG95211-ML-123058399: RNCC: 2 | RNVC: 2
0295 0749: RNCC: 3 | RNVC: 2
2950749: RNCC: 5 | RNVC: 2
950749EZ0609-98: RNCC: 5 | RNVC: 9

20 Dec 1985

5340-12-332-0098
Resilient Mount

123320098
DIN95363-A30X30-M8X15-CR70ST: RNCC: 2 | RNVC: 2
4000.004: RNCC: 5 | RNVC: 2
500033-M8X15.CR70.ST: RNCC: 5 | RNVC: 2
919380: RNCC: 5 | RNVC: 2
FT NL 4000.004: RNCC: 5 | RNVC: 2
VG95363-A30X30-M8X15-CR70ST: RNCC: 5 | RNVC: 9

15 Jul 1993

5340-12-179-5489
Angle Bracket

121795489
C381-A27-C51: RNCC: 2 | RNVC: 2
C381A27C51: RNCC: 3 | RNVC: 2
C381-A27-C51: RNCC: 5 | RNVC: 2
C381A27C51: RNCC: 5 | RNVC: 2
C381-A27-C51: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-323-9411
Access Cover

123239411
060.20.0016: RNCC: 3 | RNVC: 2

10 Jan 1991

5340-12-123-3233
Catch Strike

121233233
DIN3133-G15X17BK: RNCC: 2 | RNVC: 2
6020125: RNCC: 3 | RNVC: 2
AK15DIN31340HNESPANNVERSCHLUSZ: RNCC: 5 | RNVC: 2
DIN3133-G15X17-BK: RNCC: 5 | RNVC: 2
54-0039-604-01: RNCC: 5 | RNVC: 2
25704-192500T17: RNCC: 5 | RNVC: 2
AK15DIN3134R0H: RNCC: 5 | RNVC: 2
51174: RNCC: 5 | RNVC: 2
3704939: RNCC: 5 | RNVC: 2
25704-192500T17: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-180-3642
Dust And Moisture Seal Protective Cap

121803642
1G0150: RNCC: 3 | RNVC: 2
0008990218: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-12-391-5057
Loop Clamp

123915057
I000312: RNCC: 3 | RNVC: 2

15 Mar 2013

5340-12-366-0168
Mounting Bracket

123660168
3624A011: RNCC: 3 | RNVC: 2

28 Feb 2005

5340-12-332-7186
Pipe Bracket

123327186
113215: RNCC: 3 | RNVC: 2

10 Sep 1993

5340-12-322-1158
Access Door

123221158
9000 8197: RNCC: 3 | RNVC: 2

25 Jul 1990

5340-12-363-6527
Antipilferage Seal

123636527
42.968.0041: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-12-360-0126
Mounting Plate

123600126
24-520-JK-005: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-158-7533
Mending Plate

121587533
8380780341: RNCC: 2 | RNVC: 2
8380780341: RNCC: 3 | RNVC: 2
4799-021: RNCC: 5 | RNVC: 2
4799021: RNCC: 5 | RNVC: 2
600330: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-700-8531
Loop Clamp

127008531
VG95211-ML-127008531: RNCC: 2 | RNVC: 2
155N1119-550: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-340-0896
Loop Clamp

123400896
V6530-00003-043: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-702-9373
Dust And Moisture Seal Protective Cap

127029373
VG95211-ML-127029373: RNCC: 2 | RNVC: 2
N1163-24X1,5: RNCC: 3 | RNVC: 2
0500801014490: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-171-0634
Access Cover

121710634
81272100004: RNCC: 3 | RNVC: 2
81.27210.0004: RNCC: 5 | RNVC: 2
23250-032601-003-0: RNCC: 5 | RNVC: 9

5 Sep 1977

5340-12-350-7705
Rigid Caster

123507705
BE-VPP 125R-SG-FA: RNCC: 3 | RNVC: 2
BE-VPP125R-SG-FA: RNCC: 5 | RNVC: 2
580.1950: RNCC: 5 | RNVC: 2

18 May 2000

5340-12-179-2885
Spring Tension Clip

121792885
5801113-11131: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-365-5805
Multiple Angle Bracket

123655805
J27420053-405: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-365-6299
Section Block Clamp

123656299
J29120301-001: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-345-3750
Loop Clamp

123453750
21295A: RNCC: 3 | RNVC: 2
81.61941-0203: RNCC: 5 | RNVC: 2
81619410203: RNCC: 5 | RNVC: 2
212 95A: RNCC: 5 | RNVC: 2

10 Mar 1998

5340-12-394-0188
Mounting Plate

123940188
82411051215: RNCC: 3 | RNVC: 2
82.41105-1215: RNCC: 5 | RNVC: 2

30 Oct 2013

5340-12-306-7175
Mending Plate

123067175
5802027-3010.02: RNCC: 2 | RNVC: 2
7802037312: RNCC: 3 | RNVC: 2
78020 37312: RNCC: 5 | RNVC: 9

21 Mar 1986

5340-12-701-4215
Mounting Bracket

127014215
VG95211-ML-127014215: RNCC: 2 | RNVC: 2
5.12.5312.1042.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-8778
Loop Clamp

127008778
VG95211-ML-127008778: RNCC: 2 | RNVC: 2
1673S-52-21-2: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-343-5413
Webbing Strap

123435413
DAN80-1-150: RNCC: 3 | RNVC: 2

2 Jul 1997

5340-12-392-5049
Rod End Clevis

123925049
DIN71752-G6X12: RNCC: 2 | RNVC: 2
DIN71752-6-12-M6: RNCC: 3 | RNVC: 2
50052646: RNCC: 5 | RNVC: 2

13 Jun 2013

5340-12-701-7632
Retaining Band

127017632
VG95211-ML-127017632: RNCC: 2 | RNVC: 2
5.12.7701.2740.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-7092
Retaining Strap

121877092
VG95933BR-10-W1-BK: RNCC: 2 | RNVC: 2
1/1G10MMN325: RNCC: 3 | RNVC: 2
MMN325-1-1G8-10: RNCC: 5 | RNVC: 2
700325 010200: RNCC: 5 | RNVC: 2
700325010200: RNCC: 5 | RNVC: 2
MMN325-1-1G8-10: RNCC: 5 | RNVC: 2
1-1G10MMN325: RNCC: 5 | RNVC: 9

29 Apr 1981

5340-12-305-1135
Mending Plate

123051135
4900059-323310.005.0: RNCC: 3 | RNVC: 2

27 Sep 1985

5340-12-300-0242
Mending Plate

123000242
C249-A34-C30: RNCC: 3 | RNVC: 2

27 Jun 1984

5340-12-702-5495
Mounting Bracket

127025495
VG95211-ML-127025495: RNCC: 2 | RNVC: 2
5.51.7213.0002.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-348-8732
Angle Bracket

123488732
245/7383-02-00-07: RNCC: 3 | RNVC: 2

30 Aug 1999

5340-12-389-0726
Expansion Shield

123890726
NO PRIMARY REF 12-389-0726: RNCC: 3 | RNVC: 2
567047: RNCC: 5 | RNVC: 2
567047: RNCC: 5 | RNVC: 2

24 May 2012

5340-12-307-5790
Mending Plate

123075790
537161-2235.000: RNCC: 3 | RNVC: 2
537161-2235.000: RNCC: 5 | RNVC: 9
537161-2235: RNCC: 5 | RNVC: 9
537161-2235: RNCC: 5 | RNVC: 9

4 Jul 1986

5340-12-305-9519
Plain Solid Disk

123059519
4/0439/7433/2: RNCC: 2 | RNVC: 2
4/0439/7433/2: RNCC: 3 | RNVC: 2

14 Jan 1986

5340-12-365-1488
Mounting Plate

123651488
1837-191300.011.0: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-196-6815
Catch Strike

121966815
3.31.0228.0: RNCC: 3 | RNVC: 2
3.31.228.0: RNCC: 5 | RNVC: 2

1 Aug 1983

5340-12-349-8043
Flush Lock

123498043
51 25 2 313 472: RNCC: 3 | RNVC: 2

11 Jan 2000

5340-12-368-9892
Multiple Angle Bracket

123689892
7803221205: RNCC: 3 | RNVC: 2
1030010-721180.000.0: RNCC: 5 | RNVC: 2

10 May 2006

5340-12-306-5904
Extension Drawer Slide

123065904
4760.0M86A: RNCC: 3 | RNVC: 2
4760,0M 86 A: RNCC: 5 | RNVC: 2

12 Mar 1986

5340-12-168-5475
Rod End Clevis

121685475
WW 414 219 A: RNCC: 2 | RNVC: 2
WW 414 219 A: RNCC: 3 | RNVC: 9
WW414219A: RNCC: 5 | RNVC: 2
WW 414 219 A: RNCC: 5 | RNVC: 2
WW414219A: RNCC: 5 | RNVC: 2
WW414219A: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-337-9404
Mending Plate

123379404
G-S-105182: RNCC: 3 | RNVC: 2

4 May 1995

5340-12-353-0147
Angle Bracket

123530147
T324M2001207: RNCC: 3 | RNVC: 2

18 Jan 2001

5340-12-379-5090
Mounting Plate

123795090
0088182: RNCC: 3 | RNVC: 2

31 Jul 2009

5340-12-044-2156

5340-12-316-7255
Angle Bracket

123167255
42207608: RNCC: 3 | RNVC: 2

7 Feb 1989

5340-12-352-2957
Loop Clamp

123522957
5304338: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-348-0893
Loop Clamp

123480893
272.494.931: RNCC: 3 | RNVC: 2
272.494931: RNCC: 5 | RNVC: 9

13 Apr 1999

5340-12-351-9853
Mounting Bracket

123519853
5619102: RNCC: 3 | RNVC: 2

25 Sep 2000

5340-12-361-7693
Dust And Moisture Seal Protective Cap

123617693
PAN3863T10: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-12-344-4050
Retaining Band

123444050
R50661: RNCC: 3 | RNVC: 2
R50661: RNCC: 5 | RNVC: 2

23 Oct 1997

5340-12-393-7766
Block Clamp

123937766
ECS6088G1C14: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-12-308-1400
Handle Grip

123081400
4019020066: RNCC: 3 | RNVC: 2

5 Sep 1986

5340-12-308-6746
Access Cover

123086746
5800046-9391.00: RNCC: 2 | RNVC: 2
5800046-9391.00: RNCC: 3 | RNVC: 2
5800046-9391.00: RNCC: 5 | RNVC: 9
5800046-9391.00: RNCC: 5 | RNVC: 9

6 Nov 1986

5340-12-391-4796
Manual Control Handle

123914796
I010856: RNCC: 3 | RNVC: 2
4052063108564: RNCC: 5 | RNVC: 2

14 Mar 2013

5340-12-333-8834
Mounting Bracket

123338834
404-5-8: RNCC: 3 | RNVC: 2
404-5.8: RNCC: 5 | RNVC: 2

21 Feb 1994

5340-12-328-0108
Webbing Strap

123280108
40408-707: RNCC: 2 | RNVC: 2
40408-707: RNCC: 3 | RNVC: 2
40408-708: RNCC: 5 | RNVC: 2
40408-708: RNCC: 5 | RNVC: 2
ZG M-LAL-117000-40408: RNCC: 5 | RNVC: 2
40408-707: RNCC: 5 | RNVC: 9
40408-708: RNCC: 5 | RNVC: 9
ZG M-LAL-117000-40408: RNCC: 5 | RNVC: 9

28 Mar 1992

5340-12-130-6073
Butt Hinge

121306073
DIN7956-60X1,25-30-ST-BK-U: RNCC: 2 | RNVC: 2
C60X1-25DIN7956ST: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-172-9992
Resilient Mount

121729992
845-735278BL.2.NR70.ST: RNCC: 3 | RNVC: 2
735278BL2: RNCC: 3 | RNVC: 2
735278BL2HART: RNCC: 3 | RNVC: 2
57352780047: RNCC: 5 | RNVC: 2
0009888810: RNCC: 5 | RNVC: 2
000 988 88 10: RNCC: 5 | RNVC: 2

13 Mar 1978

5340-12-701-6863
Mounting Plate

127016863
VG95211-ML-127016863: RNCC: 2 | RNVC: 2
5.12.7220.2062.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5042
Mounting Bracket

127025042
VG95211-ML-127025042: RNCC: 2 | RNVC: 2
5.51.6500.0320.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-6771
Sliding Stay

123076771
1218 9364: RNCC: 3 | RNVC: 2
12189364: RNCC: 5 | RNVC: 9
6-226-0-650-038-4: RNCC: 5 | RNVC: 9
6.226.0.650.038.4: RNCC: 5 | RNVC: 9

16 Jul 1986

5340-12-183-6244
Ring

121836244
4-04-010-502-01-0-00000Z01: RNCC: 3 | RNVC: 2
32147-11: RNCC: 5 | RNVC: 2

6 May 1980

5340-12-355-1127
Mounting Bracket

123551127
1116572: RNCC: 3 | RNVC: 2
529-760200.10.0: RNCC: 5 | RNVC: 2

9 Oct 2001

5340-12-344-2377
Access Cover

123442377
2500255-531450.000.0: RNCC: 2 | RNVC: 2
2500255-531450.000.0: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-12-353-7876
Compression Cup

123537876
VIHSF220-5: RNCC: 3 | RNVC: 2
VIHSF220-5 801/4: RNCC: 5 | RNVC: 2

10 May 2001

5340-12-356-0762
Mounting Bracket

123560762
1661-000000.025.0: RNCC: 2 | RNVC: 2
1661-000000.025.0: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-12-702-4166
Angle Bracket

127024166
VG95211-ML-127024166: RNCC: 2 | RNVC: 2
5.12.7001.1210.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-330-4346
Loop Clamp

123304346
DIN3016-1-D2-13-28X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-13-28X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.13-28/15-W1: RNCC: 3 | RNVC: 2
RSGU1.13-28/15: RNCC: 5 | RNVC: 2
DIN3016-D2-13-28X15-W1-2: RNCC: 5 | RNVC: 9

15 Dec 1992

5340-12-303-8679
Bow Handle

123038679
M523120-1: RNCC: 3 | RNVC: 9
M523120-1: RNCC: 5 | RNVC: 2

9 May 1985

5340-12-340-0087
Mounting Bracket

123400087
6.4241-6: RNCC: 3 | RNVC: 2

13 Feb 1996

5340-12-318-8255
Flush Lock

123188255
2038-1: RNCC: 3 | RNVC: 2

18 Aug 1989

5340-12-357-1024
Loop Clamp

123571024
EN4114V05WH1: RNCC: 2 | RNVC: 2

7 May 2002

5340-12-353-3949
Dust And Moisture Seal Protective Cap

123533949
366 132 03 85: RNCC: 3 | RNVC: 2
3661320385: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-12-169-9653
Angle Bracket

121699653
118092201: RNCC: 3 | RNVC: 2
D118092201: RNCC: 5 | RNVC: 9

15 Jun 1977

5340-12-328-3698
Butt Hinge Leaf

123283698
2106-211000A14B: RNCC: 2 | RNVC: 2
2106-211000A14B: RNCC: 3 | RNVC: 2
2106-211000.14B: RNCC: 5 | RNVC: 2
2106-211000A14B: RNCC: 5 | RNVC: 2
2106-211000.14B: RNCC: 5 | RNVC: 9

12 May 1992

5340-12-193-6999
Strap Fastener Loop

121936999
3200013: RNCC: 3 | RNVC: 2
S109.51: RNCC: 5 | RNVC: 2
81437: RNCC: 5 | RNVC: 2
4359887083: RNCC: 5 | RNVC: 2
4050: RNCC: 5 | RNVC: 9
109/51: RNCC: 5 | RNVC: 9

24 Aug 1982

5340-12-372-4864
Angle Bracket

123724864
160-73308-03: RNCC: 3 | RNVC: 2
15160-73308.03: RNCC: 5 | RNVC: 2

20 Jul 2007

5340-12-335-1909
Mounting Bracket

123351909
5803674-208300.00: RNCC: 2 | RNVC: 2
7804234230: RNCC: 3 | RNVC: 2
5803674-208300.00: RNCC: 5 | RNVC: 2
78042 34230: RNCC: 5 | RNVC: 9

26 Jul 1994

5340-12-185-1977
Door Button

121851977
DIN7463-A2-10ZN: RNCC: 2 | RNVC: 2
A2-10DIN7463GALZN8: RNCC: 5 | RNVC: 2

20 Sep 1980

5340-12-319-1582
Mounting Bracket

123191582
2654-332640.01: RNCC: 2 | RNVC: 2
2654-332640.01: RNCC: 3 | RNVC: 2
679-02050400.01: RNCC: 5 | RNVC: 9
2654-332 640.01: RNCC: 5 | RNVC: 9
679-02050400.01: RNCC: 5 | RNVC: 9

12 Sep 1989

5340-12-347-8820
Mounting Bracket

123478820
95048-130-018-000: RNCC: 3 | RNVC: 2
95048-130-018-000: RNCC: 5 | RNVC: 9

3 Mar 1999

5340-12-362-8352
Mounting Bracket

123628352
9238623003: RNCC: 3 | RNVC: 2
923862 3003: RNCC: 5 | RNVC: 2

6 Apr 2004

5340-12-305-1226
Webbing Strap

123051226
C122-A11-C17: RNCC: 3 | RNVC: 2
000-E6-25X2,5X700-PE-RAL6031: RNCC: 6 | RNVC: 9

27 Sep 1985

5340-12-313-3733
Dust And Moisture Seal Protective Plug

123133733
300V19: RNCC: 3 | RNVC: 2
1302 100 9100/84: RNCC: 5 | RNVC: 2
00029980102: RNCC: 5 | RNVC: 2
GPN300,V19: RNCC: 5 | RNVC: 9
301001900: RNCC: 5 | RNVC: 9

26 Mar 1988

5340-12-343-6410
Mounting Plate

123436410
5803676-201800.00: RNCC: 2 | RNVC: 2
5803676-201800.00: RNCC: 3 | RNVC: 2

10 Jul 1997

5340-12-305-4997
Nut And Bolt Locking Plate

123054997
6100125-0000.025: RNCC: 2 | RNVC: 2
0490220008: RNCC: 3 | RNVC: 2

14 Nov 1985

5340-12-152-5402
Rod End Clevis

121525402
7101-41-100-109: RNCC: 3 | RNVC: 2
909792705: RNCC: 5 | RNVC: 2
7101-41-100-109: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-372-4039
Sliding Door Track

123724039
5400053-972500.06: RNCC: 2 | RNVC: 2
5400053-972500.06: RNCC: 3 | RNVC: 2

13 Jul 2007

5340-12-310-3121
Retaining Strap

123103121
DSCM001: RNCC: 3 | RNVC: 2
DS CM 001: RNCC: 5 | RNVC: 2

8 May 1987

5340-12-155-5514
Pipe Bracket

121555514
160-70244-02: RNCC: 3 | RNVC: 2
160-70244-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-4734
Mending Plate

123024734
556-526000.060: RNCC: 3 | RNVC: 2
556-526000-060: RNCC: 5 | RNVC: 2

4 Jan 1985

5340-12-350-4687
Extension Drawer Slide Section

123504687
GC0307-0483: RNCC: 3 | RNVC: 2
7144897: RNCC: 5 | RNVC: 2

4 Apr 2000

5340-12-317-2829
Access Door

123172829
2150921: RNCC: 3 | RNVC: 2
2150-921: RNCC: 5 | RNVC: 2

23 Mar 1989

5340-12-189-5938
Compression Cup

121895938
54.2246.030.04: RNCC: 3 | RNVC: 2
54-2246-030-04: RNCC: 5 | RNVC: 2

7 Oct 1981

5340-12-002-1339

5340-12-010-0823

5340-12-311-2491
Angle Bracket

123112491
2500179-196450.000.0: RNCC: 2 | RNVC: 2
2500179-196450.000.0: RNCC: 3 | RNVC: 2

10 Aug 1987

5340-12-150-3730
Webbing Strap

121503730
23307-262125.00.0: RNCC: 2 | RNVC: 2
82300-23307-262125.00.0: RNCC: 3 | RNVC: 2
23307-262125-00-0: RNCC: 3 | RNVC: 2
23307-262125-00-0: RNCC: 5 | RNVC: 9
23307-262125.00.0: RNCC: 5 | RNVC: 9
82300-C560X30-NBR-ST-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-316-2956
Nonmetallic Bumper

123162956
6371729: RNCC: 3 | RNVC: 2
837-6371729: RNCC: 5 | RNVC: 2

9 Jan 1989

5340-12-144-8649
Butt Hinge Leaf

121448649
A25X3X656HAN16515W3355-7SWEL0X: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-186-3255
Mounting Bracket

121863255
CF 463 122 -X: RNCC: 3 | RNVC: 2
CF 463 122 -X: RNCC: 5 | RNVC: 2
CF4631220X: RNCC: 5 | RNVC: 9
CF4631220X: RNCC: 5 | RNVC: 9

17 Dec 1980

5340-12-391-7216
Mounting Plate

123917216
I007074TAN686A: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-12-328-4024
Casement Fastener

123284024
2653-189480.00: RNCC: 2 | RNVC: 2
2653-189480.00: RNCC: 3 | RNVC: 2

15 May 1992

5340-12-176-2777
Webbing Strap

121762777
23290-181295: RNCC: 2 | RNVC: 2
23290-181295: RNCC: 3 | RNVC: 2
23290-181295: RNCC: 5 | RNVC: 2
23290-181295: RNCC: 5 | RNVC: 9
23290-181295: RNCC: 5 | RNVC: 9

23 Nov 1978

5340-12-702-0904
Angle Bracket

127020904
VG95211-ML-127020904: RNCC: 2 | RNVC: 2
30.5311.180: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-171-6359
Escutcheon Plate

121716359
81626420022: RNCC: 3 | RNVC: 2
23230-172447-006-0: RNCC: 5 | RNVC: 2
1203683: RNCC: 5 | RNVC: 2
81.62642-0022: RNCC: 5 | RNVC: 2
81-62642-0022: RNCC: 5 | RNVC: 2
23230-172447.006.0: RNCC: 5 | RNVC: 9

28 Oct 1977

5340-12-301-1194
Double Angle Bracket

123011194
P-855153-401: RNCC: 3 | RNVC: 2
P855153-401: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-338-7318
Expansion Shield

123387318
60825: RNCC: 3 | RNVC: 2
EAM6A4: RNCC: 5 | RNVC: 2

21 Aug 1995

5340-12-026-4150

5340-12-342-1561
Double Angle Bracket

123421561
536D14030: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-360-4124
Mounting Bracket

123604124
3514376205: RNCC: 3 | RNVC: 2
3514376205: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-328-6171
Manual Control Handle

123286171
4985064-110: RNCC: 2 | RNVC: 2
4985064-110: RNCC: 3 | RNVC: 2

10 Jun 1992

5340-12-358-2269
Mounting Bracket

123582269
5400051-372132.00: RNCC: 2 | RNVC: 2
5400051-372132.00: RNCC: 3 | RNVC: 2

30 Sep 2002

5340-12-178-1274
Spring Tension Clip

121781274
KLS18GU-18GU: RNCC: 3 | RNVC: 2
12151697: RNCC: 5 | RNVC: 2
KLS18GU18GU: RNCC: 5 | RNVC: 2
5809918018: RNCC: 5 | RNVC: 2
KLS 18GU-18GU: RNCC: 5 | RNVC: 2
6.0402.09.4.1818: RNCC: 5 | RNVC: 9
85-691-8538: RNCC: 6 | RNVC: 9

22 Mar 1979

5340-12-126-0306
Buckle

121260306
26VG4858: RNCC: 2 | RNVC: 2
23193-6410-32: RNCC: 5 | RNVC: 2
23193-6410-32: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-5935
Angle Bracket

123655935
J53230214-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-309-5616
Angle Bracket

123095616
5802255-050000.008: RNCC: 2 | RNVC: 2
5802255-050000.008: RNCC: 5 | RNVC: 9

4 Feb 1987

5340-12-172-8666
Handrail Bracket

121728666
2617: RNCC: 3 | RNVC: 2

27 Feb 1978

5340-12-183-8114
Dust And Moisture Seal Protective Cap

121838114
311837347: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-354-3157
Mounting Bracket

123543157
4375800025: RNCC: 3 | RNVC: 2

29 Jun 2001

5340-12-361-1340
Loop Clamp

123611340
160.15.0274: RNCC: 3 | RNVC: 2

27 Aug 2003

5340-12-701-9945
Loop Clamp

127019945
VG95211-ML-127019945: RNCC: 2 | RNVC: 2
155N464-574: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-383-2600
Retaining Strap

123832600
6475-0212: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-12-195-7188
Sealing Plug Assembly

121957188
00320-001-000: RNCC: 3 | RNVC: 2
320-01: RNCC: 5 | RNVC: 9

31 Mar 1983

5340-12-316-5198
Angle Bracket

123165198
4900278-103100.01: RNCC: 2 | RNVC: 2
4900278-103100.01: RNCC: 3 | RNVC: 2

23 Jan 1989

5340-12-356-6407
Retaining Band

123566407
N/S10-6/406/7: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-389-9818
Loop Clamp

123899818
DIN3016-1-D1-28X20-W3-EPDM: RNCC: 2 | RNVC: 2
RSGU1.28/20-W3: RNCC: 3 | RNVC: 2

20 Sep 2012

5340-12-346-1540
Dust And Moisture Seal Protective Cap

123461540
VG95211-ML-123461540: RNCC: 2 | RNVC: 2
743166: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-12-323-1943
Mending Plate

123231943
136-040.13-006: RNCC: 3 | RNVC: 2

31 Oct 1990

5340-12-192-9267
Pad Eye

121929267
02-0899-181940.00.0: RNCC: 3 | RNVC: 2
02-0899-181940-00-0: RNCC: 5 | RNVC: 2

7 Jun 1982

5340-12-324-0652
Mounting Plate

123240652
C22107-A300-C116: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-12-388-8659
Synchro Clamp

123888659
2315-0013: RNCC: 3 | RNVC: 2

2 May 2012

5340-12-365-5800
Lock-Release Lever

123655800
330205-1204-000: RNCC: 3 | RNVC: 2
332051204000: RNCC: 5 | RNVC: 2

18 Jan 2005

5340-12-394-6182
Latch Bar

123946182
8.952.08-256300.02: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-12-152-2058
Bow Handle

121522058
100278-26010.00.0: RNCC: 2 | RNVC: 2
100278-26010.00.0: RNCC: 3 | RNVC: 2
100278-26010-00-0: RNCC: 5 | RNVC: 2
100278-26010-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-3980
Mending Plate

123063980
V22.917.1-28: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-199-5096
Resilient Mount

121995096
BB2.81-NR55.ST: RNCC: 3 | RNVC: 2
BB2.81/25N: RNCC: 3 | RNVC: 9
BB2.81: RNCC: 5 | RNVC: 9
BB2-81: RNCC: 5 | RNVC: 9

8 May 1984

5340-12-354-8219
Webbing Strap

123548219
2500273-970812.000.0: RNCC: 2 | RNVC: 2
2500273-970812.000.0: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-324-0349
Access Cover

123240349
20091-300: RNCC: 2 | RNVC: 2
8.01.24: RNCC: 3 | RNVC: 2
00801240: RNCC: 5 | RNVC: 2
20091-300: RNCC: 5 | RNVC: 9

17 Jan 1991

5340-12-169-3061
Helical Compression Spring Seat

121693061
CF409751A: RNCC: 3 | RNVC: 2
CF 409 751 A: RNCC: 5 | RNVC: 2
CF409751A: RNCC: 5 | RNVC: 2
CF409751A: RNCC: 5 | RNVC: 2
CF 409 751 A: RNCC: 5 | RNVC: 2
CF 409 751 A: RNCC: 5 | RNVC: 2

4 May 1977

5340-12-390-7580
Headless Straight Rod

123907580
107W163100.001.0: RNCC: 2 | RNVC: 2
107W163100.001.0: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-12-306-8078
Dust And Moisture Seal Protective Cap

123068078
2500179-270580.001.0: RNCC: 2 | RNVC: 2
2500179-270580.001.0: RNCC: 3 | RNVC: 2
2500179-270580.001.0: RNCC: 5 | RNVC: 2

4 Apr 1986

5340-12-388-1114
Mounting Bracket

123881114
866404310: RNCC: 3 | RNVC: 2

24 Feb 2012

5340-12-357-8145
Mounting Bracket

123578145
2300042-255261.000: RNCC: 2 | RNVC: 2
9940478: RNCC: 3 | RNVC: 2
2300042-255261.000: RNCC: 5 | RNVC: 2

29 Jul 2002

5340-12-323-7633
Nonmetallic Bumper

123237633
119227: RNCC: 3 | RNVC: 2

14 Dec 1990

5340-12-357-9160
Dust And Moisture Seal Protective Cover

123579160
2300042-255815.000: RNCC: 2 | RNVC: 2
2300042-255815.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-145-5861
Resilient Mount

121455861
23114-5000.01: RNCC: 2 | RNVC: 2
81100-30X15-M8X9-M8X20.NR60.ST: RNCC: 3 | RNVC: 2
23114-5000.01: RNCC: 5 | RNVC: 2
23114-5000-01: RNCC: 5 | RNVC: 9
23114-5000-01: RNCC: 5 | RNVC: 9
23114-5000.01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-378-8530
Mechanical Stop

123788530
106-5283-02-11-02: RNCC: 3 | RNVC: 2

19 May 2009

5340-12-164-4069
Rod End Clevis

121644069
160-26950-20: RNCC: 3 | RNVC: 2
160-26950-20: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-325-5099
Resilient Mount

123255099
SPWG86486: RNCC: 3 | RNVC: 2
KM/31102: RNCC: 5 | RNVC: 2
KM131102: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-12-131-1174
Retaining Strap

121311174
DIN72571-1X20-ST-ZN: RNCC: 2 | RNVC: 2
DIN72571-1X20-ST-VERZINKT: RNCC: 3 | RNVC: 2
1X20DIN72571STVERZINKT: RNCC: 5 | RNVC: 2
DIN72571-1X20-ST-VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-128-9093
Retaining Strap

121289093
1216 8427: RNCC: 3 | RNVC: 2
6-420-0-977-005-4: RNCC: 5 | RNVC: 9
12168427: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-703-3068
Mending Plate

127033068
VG95211-ML-127033068: RNCC: 2 | RNVC: 2
5.12.2210.1603.01: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-311-3545
Angle Bracket

123113545
P-243996-753: RNCC: 3 | RNVC: 2
P243996-753: RNCC: 5 | RNVC: 2

21 Aug 1987

5340-12-164-4372
Retaining Strap

121644372
2360-100000.31.0: RNCC: 2 | RNVC: 2
2360-100000.31.0: RNCC: 3 | RNVC: 2
2360-100000.31.0: RNCC: 5 | RNVC: 2
2360-100000-31-0: RNCC: 5 | RNVC: 2
2360-100000-31-0: RNCC: 5 | RNVC: 2
2360-100000-31-0: RNCC: 5 | RNVC: 9
2360-100000.31.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-170-5228
Loop Clamp

121705228
HNY16V: RNCC: 3 | RNVC: 2
211-65169: RNCC: 5 | RNVC: 2
19-132300-11091: RNCC: 5 | RNVC: 2
203016101: RNCC: 5 | RNVC: 9

20 Jul 1977

5340-12-365-8415
Swivel Caster

123658415
164840: RNCC: 3 | RNVC: 2
PG LAK 74/300/75K-RFST: RNCC: 5 | RNVC: 2

11 Feb 2005

5340-12-355-4870
Angle Bracket

123554870
4615040039: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-354-1598
Caster Wheel

123541598
1715623: RNCC: 3 | RNVC: 2
1715623: RNCC: 5 | RNVC: 2
1715623: RNCC: 5 | RNVC: 2

12 Jun 2001

5340-12-358-7970
Helical Compression Spring Seat

123587970
14.70.21: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-363-7588
Spacing Threaded Standoff

123637588
1713-180000.000.0: RNCC: 2 | RNVC: 2
1713-180000.000.0: RNCC: 3 | RNVC: 2

22 Jul 2004

5340-12-308-8147
Angle Bracket

123088147
8391752244: RNCC: 3 | RNVC: 2

18 Nov 1986

5340-12-317-2519
Access Cover

123172519
CF 107 089 C: RNCC: 3 | RNVC: 2
CF 107 089 C: RNCC: 5 | RNVC: 2

21 Mar 1989

5340-12-307-8340
Mounting Bracket

123078340
2300061-291251.000: RNCC: 2 | RNVC: 2
2300061-291251: RNCC: 5 | RNVC: 9

31 Jul 1986

5340-12-194-6501
Metal Runner

121946501
66.3851.105.01-A001: RNCC: 3 | RNVC: 2
161359: RNCC: 5 | RNVC: 2
66-3851-105-01A001: RNCC: 5 | RNVC: 9

25 Nov 1982

5340-12-314-0964
Mounting Bracket

123140964
2602176: RNCC: 3 | RNVC: 2
2602-176: RNCC: 5 | RNVC: 2

7 Jun 1988

5340-12-183-2051
Dust And Moisture Seal Protective Cap

121832051
PAN6433-1MA24: RNCC: 3 | RNVC: 2
COA-071: RNCC: 5 | RNVC: 2

25 Mar 1980

5340-12-701-8559
Loop Clamp

127018559
VG95211-ML-127018559: RNCC: 2 | RNVC: 2
5893A-18: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-004-2058

5340-12-146-9306
Nut And Bolt Locking Plate

121469306
25704-270105.07.0: RNCC: 2 | RNVC: 2
25704-270105.07.0: RNCC: 3 | RNVC: 2
25704-270105-07-0: RNCC: 5 | RNVC: 2
25704-270105.07.0: RNCC: 5 | RNVC: 2
25704-270105-07-0: RNCC: 5 | RNVC: 2
25704-270105-07-0: RNCC: 5 | RNVC: 9
25704-270105.07.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-394-3172
Retaining Clip

123943172
5.034-347.0: RNCC: 3 | RNVC: 2

20 Nov 2013

5340-12-384-0952
Rim Lock

123840952
5981-183000.025.0: RNCC: 2 | RNVC: 2
5981-183000.025.0: RNCC: 3 | RNVC: 2

20 Jan 2011

5340-12-701-5265
Mounting Plate

127015265
VG95211-ML-127015265: RNCC: 2 | RNVC: 2
5.12.6102.0310.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-3945
Mounting Bracket

127013945
VG95211-ML-127013945: RNCC: 2 | RNVC: 2
5.12.5311.2220.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-703-3095
Mending Plate

127033095
VG95211-ML-127033095: RNCC: 2 | RNVC: 2
5.12.4002.0515.98: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-353-1820
Mounting Bracket

123531820
2500238-041016.000.0: RNCC: 2 | RNVC: 2
2500238-041016.000.0: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-304-3351
Manual Control Handle

123043351
1 66 259: RNCC: 3 | RNVC: 9

5 Jul 1985

5340-12-310-2923
Nonmetallic Bumper

123102923
2500179-280200.009.0: RNCC: 2 | RNVC: 2
2500179-280200.009.0: RNCC: 3 | RNVC: 2

6 May 1987

5340-12-317-0443
Spring Tension Clip

123170443
75060017: RNCC: 3 | RNVC: 2
8.033.000.007: RNCC: 5 | RNVC: 2

7 Mar 1989

5340-12-307-0877
Nonmetallic Bumper

123070877
12916-4: RNCC: 3 | RNVC: 2

7 May 1986

5340-12-366-1102
Mounting Plate

123661102
2500075-580412.001.0: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-700-6653
Retaining Clip

127006653
5.12.4901.3404.98: RNCC: 3 | RNVC: 2
0501400695859: RNCC: 5 | RNVC: 2

6 Oct 1992

5340-12-309-8185
Dust And Moisture Seal Protective Cap

123098185
320-997001-04: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-12-334-1343
Door Handle

123341343
591041877: RNCC: 3 | RNVC: 2
NR.10-171: RNCC: 5 | RNVC: 2
WSS-HANDGRIFF: RNCC: 5 | RNVC: 2
10-171: RNCC: 5 | RNVC: 9

23 Mar 1994

5340-12-372-4150
Access Cover

123724150
8275-0014: RNCC: 2 | RNVC: 2
8275-0014: RNCC: 3 | RNVC: 2

16 Jul 2007

5340-12-337-6183
Mounting Bracket

123376183
6700018-203210.00: RNCC: 2 | RNVC: 2
6700018-203210.00: RNCC: 3 | RNVC: 2

20 Mar 1995

5340-12-163-9501
Retaining Strap

121639501
V22.228.524000-15: RNCC: 3 | RNVC: 2
V2.228.524000-15: RNCC: 5 | RNVC: 2
V2-228-524000-15: RNCC: 5 | RNVC: 2
V22-228-524000-15EZ4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-381-1373
Webbing Strap

123811373
6.373-400.0: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-12-701-7656
Angle Bracket

127017656
VG95211-ML-127017656: RNCC: 2 | RNVC: 2
5.12.7701.8320.06: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-378-2266
Loop Clamp

123782266
DIN3016-1-D2-8-15X12-W1-2-CR: RNCC: 2 | RNVC: 2
80040964: RNCC: 5 | RNVC: 2

20 Mar 2009

5340-12-186-9094
Strap Hinge

121869094
3900054-820000.01: RNCC: 2 | RNVC: 2
3900054-820000-01: RNCC: 5 | RNVC: 2
3900054-820000-01: RNCC: 5 | RNVC: 2

18 Feb 1981

5340-12-347-2223
Mounting Bracket

123472223
2300421-041130.000: RNCC: 2 | RNVC: 2
9908378: RNCC: 3 | RNVC: 2
2300421-041130.000: RNCC: 5 | RNVC: 2
2300421-041130.000: RNCC: 5 | RNVC: 9
9908378: RNCC: 5 | RNVC: 9

13 Nov 1998

5340-12-305-3990
Angle Bracket

123053990
4900189-111200.00: RNCC: 2 | RNVC: 2
4900189-111200.00: RNCC: 3 | RNVC: 2
4900189-111200.00: RNCC: 5 | RNVC: 2

31 Oct 1985

5340-12-187-2817
Angle Bracket

121872817
5801698-1000.09: RNCC: 2 | RNVC: 2
5801698-1000.09: RNCC: 3 | RNVC: 2
5801698-1000-09: RNCC: 5 | RNVC: 2

26 Mar 1981

5340-12-181-4836
Nut And Bolt Locking Plate

121814836
2300033-301000.03: RNCC: 2 | RNVC: 2
2300033-301000.03: RNCC: 3 | RNVC: 2
2300033-301000.03: RNCC: 5 | RNVC: 9
2300033-301000-03: RNCC: 5 | RNVC: 9
2300033-301000.03: RNCC: 5 | RNVC: 9
2300033-301000-03: RNCC: 5 | RNVC: 9

26 Nov 1979

5340-12-189-9854
Electrical-Mechanical Equipment Post

121899854
272.1021.21-09: RNCC: 3 | RNVC: 2
272-1021-21-09: RNCC: 5 | RNVC: 2
43707944-601: RNCC: 5 | RNVC: 2
272-1021-21-09: RNCC: 5 | RNVC: 9
272.1021.21-09: RNCC: 5 | RNVC: 9

2 Nov 1981

5340-12-167-8598
Catch Strike

121678598
950000-150095: RNCC: 3 | RNVC: 2
0114 0770: RNCC: 5 | RNVC: 2

26 Jan 1977

5340-12-311-2714
Mending Plate

123112714
1217105: RNCC: 3 | RNVC: 2
4300.165.00/83: RNCC: 5 | RNVC: 2
4300.165.00.00.083: RNCC: 5 | RNVC: 2

11 Aug 1987

5340-12-702-9368
Dust And Moisture Seal Protective Cap

127029368
VG95211-ML-127029368: RNCC: 2 | RNVC: 2
N1163-20X1: RNCC: 3 | RNVC: 2
0500800946990: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-371-6147
Caster Wheel

123716147
SPO150/25K: RNCC: 3 | RNVC: 2

26 Apr 2007

5340-12-164-5741
Spring Loaded Cylinder Fastener

121645741
730024-28: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-360-0182
Dust And Moisture Seal Protective Cap

123600182
290/032: RNCC: 3 | RNVC: 2
GPN290/032: RNCC: 5 | RNVC: 2

28 Mar 2003

5340-12-305-8461
Retaining Strap

123058461
127-01/72643: RNCC: 3 | RNVC: 2
127-01/72643: RNCC: 5 | RNVC: 9

23 Dec 1985

5340-12-358-3304
Spring Tension Clip

123583304
2500262-192030.001.0: RNCC: 2 | RNVC: 2
2500262-192030.001.0: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-12-374-6832
Mounting Plate

123746832
SK971-171211.006.0: RNCC: 3 | RNVC: 2
7086993: RNCC: 5 | RNVC: 2
1728282: RNCC: 5 | RNVC: 9

6 Mar 2008

5340-12-702-4582
Mounting Bracket

127024582
VG95211-ML-127024582: RNCC: 2 | RNVC: 2
5.51.0603.0015.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-327-9729
Bail Handle

123279729
M-MAV-005957-40015-402: RNCC: 3 | RNVC: 2

25 Mar 1992

5340-12-362-3070
Loop Clamp

123623070
LN9490BK13: RNCC: 2 | RNVC: 2

5 Feb 2004

5340-12-187-6695
Turnbuckle Body

121876695
D-WZ978: RNCC: 3 | RNVC: 2
DWZ978: RNCC: 5 | RNVC: 2

27 Apr 1981

5340-12-374-2562
Access Cover

123742562
L521M1034102: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-196-0016
Retaining Clip

121960016
C22136-A1000-C465: RNCC: 3 | RNVC: 2
C22136A1000C465: RNCC: 5 | RNVC: 2

13 May 1983

5340-12-185-2524
Rod End Clevis

121852524
8474656: RNCC: 3 | RNVC: 2
1412-233: RNCC: 5 | RNVC: 2
1412233: RNCC: 5 | RNVC: 2

25 Sep 1980

5340-12-702-5865
Manual Control Handle

127025865
VG95211-ML-127025865: RNCC: 2 | RNVC: 2
5.51.9205.0192.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-158-9446
Spring Tension Clip

121589446
2572-190000.11.0: RNCC: 3 | RNVC: 2
2572-190000-11-0: RNCC: 5 | RNVC: 2
2572-190000-11-0: RNCC: 5 | RNVC: 9
2572-190000.11.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-7397
Compression Cup

123197397
T100-35: RNCC: 3 | RNVC: 2
12152253: RNCC: 5 | RNVC: 2
6-0495-15-1-0001: RNCC: 5 | RNVC: 9

30 Oct 1989

5340-12-196-8493
Nonmetallic Bumper

121968493
588.70-100006-003: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-12-338-2282
Resilient Mount

123382282
59393-760: RNCC: 3 | RNVC: 2
KB-59393-760: RNCC: 5 | RNVC: 2

7 Jun 1995

5340-12-371-3109
Clamping Catch

123713109
8390-0017: RNCC: 2 | RNVC: 2
8390-0017: RNCC: 3 | RNVC: 2

13 Mar 2007

5340-12-325-7567
Webbing Strap

123257567
79017/026-0600-0050: RNCC: 3 | RNVC: 2
79017/026-0600-0050: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-375-1289
Expansion Shield

123751289
0903 818 060: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-044-2351

5340-12-315-6292
Friction Catch Stud

123156292
2500-319110.09: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-12-171-0663
Access Cover

121710663
1255 306 227: RNCC: 3 | RNVC: 2
1255306227: RNCC: 5 | RNVC: 2
1255306227: RNCC: 5 | RNVC: 9
1255306227: RNCC: 6 | RNVC: 9

5 Sep 1977

5340-12-316-4956
Electronic Equipment Hardware Kit

123164956
ZT 960: RNCC: 3 | RNVC: 2

20 Jan 1989

5340-12-358-0580
Loop Clamp

123580580
D0101818-001: RNCC: 3 | RNVC: 2

9 Sep 2002

5340-12-318-9114
Access Cover

123189114
4000000-02412: RNCC: 3 | RNVC: 2

24 Aug 1989

5340-12-304-7203
Rod End Clevis

123047203
2300126-141110.000.0: RNCC: 2 | RNVC: 2
2300126-141110.000.0: RNCC: 3 | RNVC: 2
2300126-141110.000.0: RNCC: 5 | RNVC: 2
2300126-141110.000.0: RNCC: 5 | RNVC: 9

15 Aug 1985

5340-12-318-2752
Double Angle Bracket

123182752
6600015-204.007: RNCC: 3 | RNVC: 2
6600015-204.007: RNCC: 5 | RNVC: 9

26 Jun 1989

5340-12-353-9537
Mounting Bracket

123539537
591212-0217.000: RNCC: 3 | RNVC: 2
591212-0217-000: RNCC: 5 | RNVC: 2
591212-0217.000: RNCC: 5 | RNVC: 2
591212-0217.000: RNCC: 5 | RNVC: 9

22 May 2001

5340-12-358-7813
Section Block Clamp

123587813
J29120083-001: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-165-7301
Helical Compression Spring Seat

121657301
2410120002: RNCC: 3 | RNVC: 2
2 410 120 002: RNCC: 5 | RNVC: 2
1215 6518: RNCC: 5 | RNVC: 2
12156518: RNCC: 5 | RNVC: 2
000N05384: RNCC: 5 | RNVC: 2
6-0690-72-5-2050: RNCC: 5 | RNVC: 9
6.0690.72.5.2050: RNCC: 5 | RNVC: 9

22 Jun 1976

5340-12-316-4477
Mounting Plate

123164477
P-026782-025: RNCC: 3 | RNVC: 2
P026782-025: RNCC: 5 | RNVC: 2

18 Jan 1989

5340-12-701-3704
Rod End Connector

127013704
VG95211-ML-127013704: RNCC: 2 | RNVC: 2
5.12.5303.0720.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-9027
Angle Bracket

121969027
A-295138-401: RNCC: 3 | RNVC: 2
A295138-401: RNCC: 5 | RNVC: 2

30 Aug 1983

5340-12-301-1949
Double Angle Bracket

123011949
1423-121.05(4): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-328-9580
Strap Bolt

123289580
2300232-971520.001.0: RNCC: 2 | RNVC: 2
2300232-971520.001.0: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-389-0950
Mending Plate

123890950
1187197: RNCC: 3 | RNVC: 2
H1.1784-47-01-00.00-09: RNCC: 5 | RNVC: 2

25 May 2012

5340-12-383-5349
Bow Handle

123835349
RS-20.250.62: RNCC: 3 | RNVC: 2

4 Nov 2010

5340-12-196-0232
Handwheel

121960232
E801.00-2/225: RNCC: 3 | RNVC: 2

17 May 1983

5340-12-352-5976
Rod End Connector

123525976
2500266-194500.001.0: RNCC: 2 | RNVC: 2
2500266-194500.001.0: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-12-186-0825
Retaining Strap

121860825
23176-391140-00-0: RNCC: 2 | RNVC: 2
23176-391140-00-0: RNCC: 5 | RNVC: 2
23176-391140.00.0: RNCC: 5 | RNVC: 9

27 Nov 1980

5340-12-336-9905
Multiple Angle Bracket

123369905
4900011-5.001: RNCC: 3 | RNVC: 2
4900011-5-001: RNCC: 5 | RNVC: 9
F300 0T 012 9625: RNCC: 6 | RNVC: 9

5 Jan 1995

5340-12-307-0769
Angle Bracket

123070769
151-160000-000-0: RNCC: 3 | RNVC: 2

6 May 1986

5340-12-165-3186
Clamping Catch

121653186
DIN3134-E95BK: RNCC: 2 | RNVC: 2
CK95DIN3134R0H: RNCC: 5 | RNVC: 9
DIN3134-E95-BK: RNCC: 5 | RNVC: 9

9 Apr 1976

5340-12-305-0307
Shimmy Damper

123050307
050075: RNCC: 3 | RNVC: 2
0009800464: RNCC: 5 | RNVC: 2
03-08-200-162/0200: RNCC: 5 | RNVC: 2
0308200162/0200: RNCC: 5 | RNVC: 2

19 Sep 1985

5340-12-316-7604
Butt Hinge

123167604
4500-020430: RNCC: 3 | RNVC: 2
4500-02 0399: RNCC: 5 | RNVC: 2

9 Feb 1989

5340-12-333-6583
Access Cover

123336583
8492000300: RNCC: 3 | RNVC: 2

19 Jan 1994

5340-12-359-4966
Nonmetallic Bumper

123594966
6410.114.160.003: RNCC: 3 | RNVC: 2

11 Feb 2003

5340-12-184-3115
Butt Hinge

121843115
3409-32X0-8NIR0: RNCC: 3 | RNVC: 2

15 Jul 1980

5340-12-321-5421
Filler Opening Cap

123215421
060.20.0005: RNCC: 2 | RNVC: 2
060.20.0005: RNCC: 5 | RNVC: 2
01080-00-010: RNCC: 5 | RNVC: 9

30 May 1990

Load More Results