What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 151 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 151 of 178

5340-12-156-2911
Spring Tension Clip

121562911
25704-196800.02.0: RNCC: 2 | RNVC: 2
25704-196800.02.0: RNCC: 3 | RNVC: 2
25704-196800-02-0: RNCC: 5 | RNVC: 2
25704-196800.02.0: RNCC: 5 | RNVC: 9
25704-196800-02-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-4553
Helical Compression Spring Seat

123264553
3963250015: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-12-316-5463
Mending Plate

123165463
A35389-2-S1: RNCC: 3 | RNVC: 2

24 Jan 1989

5340-12-345-6552
Mounting Plate

123456552
1216 1575: RNCC: 3 | RNVC: 2
6.232.0.650.095.4: RNCC: 5 | RNVC: 9

8 Apr 1998

5340-12-302-4917
Angle Bracket

123024917
1423-310.08(3): RNCC: 3 | RNVC: 2

8 Jan 1985

5340-12-195-6967
Rigid Caster

121956967
5800043-3000-06: RNCC: 3 | RNVC: 2
5800043-3000.06: RNCC: 5 | RNVC: 2
5800043-3000-06: RNCC: 5 | RNVC: 9
5800043-3000.06: RNCC: 5 | RNVC: 9

30 Mar 1983

5340-12-350-1914
Permanent Magnet

123501914
62710045: RNCC: 3 | RNVC: 2

25 Feb 2000

5340-12-334-2161
Friction Catch Stud

123342161
6030080: RNCC: 3 | RNVC: 2

13 Apr 1994

5340-12-357-5285
Manual Control Handle

123575285
0007580302: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-186-6550
Retaining Clip

121866550
C22326-A1000-C10: RNCC: 3 | RNVC: 2
C22326A1000C10: RNCC: 5 | RNVC: 9
C22099-A705-C236: RNCC: 5 | RNVC: 9
C22099A705C236: RNCC: 5 | RNVC: 9

23 Jan 1981

5340-12-369-8410
Access Cover

123698410
SK872-182710.000.0: RNCC: 3 | RNVC: 2
7081478: RNCC: 5 | RNVC: 2

21 Aug 2006

5340-12-330-1035
Angle Bracket

123301035
706-650040-902-0: RNCC: 2 | RNVC: 2
706-650040-902-0: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-12-328-6441
Casement Fastener

123286441
4619100061: RNCC: 3 | RNVC: 2
EXP 111 475: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-12-043-2643

5340-12-352-0208
Mounting Bracket

123520208
221000500201: RNCC: 3 | RNVC: 2
221000500201: RNCC: 5 | RNVC: 2
22 10005002 00: RNCC: 5 | RNVC: 9

4 Oct 2000

5340-12-314-7535
Spring Loaded Cylinder Fastener

123147535
1841122: RNCC: 3 | RNVC: 2
75E10.149.041: RNCC: 5 | RNVC: 2
75 E 10.149.041: RNCC: 5 | RNVC: 9

6 Aug 1988

5340-12-306-3340
Catch Strike

123063340
4607430203: RNCC: 3 | RNVC: 2
721 1 66 109 1: RNCC: 5 | RNVC: 9
460 743 02 03: RNCC: 5 | RNVC: 9

19 Feb 1986

5340-12-329-8168
Loop Clamp

123298168
3-803-0007: RNCC: 3 | RNVC: 2

2 Oct 1992

5340-12-187-8095
Wood Runner

121878095
C22300-A55-B101: RNCC: 3 | RNVC: 2
C22300A55B101: RNCC: 5 | RNVC: 2

13 May 1981

5340-12-301-5724
Spring Tension Clip

123015724
2500109-193400.00.0: RNCC: 3 | RNVC: 2
2500109-193400-00-0: RNCC: 5 | RNVC: 2
2500109-193400.00.0: RNCC: 5 | RNVC: 9
2500109-193400-00-0: RNCC: 5 | RNVC: 9

25 Oct 1984

5340-12-182-9826
Loop Clamp

121829826
LM4902LIG22: RNCC: 3 | RNVC: 2
LM4902: RNCC: 5 | RNVC: 9
LM-4902: RNCC: 5 | RNVC: 9

11 Mar 1980

5340-12-173-2263
Electrical-Mechanical Equipment Post

121732263
773-282-92: RNCC: 3 | RNVC: 2
3133-06-00: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-12-338-6909
Webbing Strap

123386909
2300013-3214.00: RNCC: 2 | RNVC: 2
7900621-00121.00: RNCC: 3 | RNVC: 2
9910873: RNCC: 5 | RNVC: 2
9910873: RNCC: 5 | RNVC: 9

16 Aug 1995

5340-12-389-8622
Mounting Bracket

123898622
1315408: RNCC: 3 | RNVC: 2

6 Sep 2012

5340-12-393-7752
Block Clamp

123937752
ECS6088G1C24: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-12-393-3403
Mounting Bracket

123933403
4434261940: RNCC: 3 | RNVC: 2

10 Sep 2013

5340-12-354-8307
Mounting Plate

123548307
5400049-621030.05: RNCC: 2 | RNVC: 2
5400049-621030.05: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-343-5673
Pipe Hanger

123435673
005-006: RNCC: 3 | RNVC: 2
F300 0T 022 5341: RNCC: 6 | RNVC: 9

3 Jul 1997

5340-12-383-4988
Mounting Bracket

123834988
14804: RNCC: 3 | RNVC: 2

28 Oct 2010

5340-12-366-0115
Mounting Bracket

123660115
9414299369: RNCC: 3 | RNVC: 2

28 Feb 2005

5340-12-376-4297
Dust And Moisture Seal Protective Cap-Plug

123764297
460190507: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-12-133-4046

5340-12-388-6721
Webbing Strap

123886721
UK025/L=800MM: RNCC: 3 | RNVC: 2

12 Apr 2012

5340-12-308-0819
Door Button

123080819
S1309P0S3-4LIG22: RNCC: 3 | RNVC: 2
S1309P0S3-4: RNCC: 5 | RNVC: 9

29 Aug 1986

5340-12-360-4785
Manual Control Handle

123604785
82003085: RNCC: 3 | RNVC: 2
82003085: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-352-2144
Angle Bracket

123522144
T537M1002201: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-315-5293
Butt Hinge Leaf

123155293
5803471-201310.04: RNCC: 2 | RNVC: 2
65.7789.421.04-A001: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-12-353-2573
Helical Compression Spring Retainer

123532573
VG95211-ML-123532573: RNCC: 2 | RNVC: 2
1AK0041T01: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-12-199-1565
Electrical-Mechanical Equipment Post

121991565
NO PRIMARY REF 12-199-1565: RNCC: 3 | RNVC: 2
80-1134-0002: RNCC: 5 | RNVC: 9

30 Mar 1984

5340-12-361-1464
Angle Bracket

123611464
J32320218-403: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-12-316-1659
Loop Clamp

123161659
06.67840-0112: RNCC: 3 | RNVC: 2
06.67840.0112: RNCC: 5 | RNVC: 2
06678400112: RNCC: 5 | RNVC: 2
A18MAN194: RNCC: 5 | RNVC: 2

28 Dec 1988

5340-12-348-0986
Mending Plate

123480986
OM76-7111-01-00.00.03: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-12-354-3987
Double Angle Bracket

123543987
J36120041-403: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-12-306-8272
Angle Bracket

123068272
2800017-200-06: RNCC: 2 | RNVC: 2
25300267: RNCC: 5 | RNVC: 2

8 Apr 1986

5340-12-324-6844
Mounting Plate

123246844
15779-01: RNCC: 3 | RNVC: 2

15 Mar 1991

5340-12-349-5862
Access Cover

123495862
U60.281000.21-00: RNCC: 3 | RNVC: 2

7 Dec 1999

5340-12-701-6418
Angle Bracket

127016418
VG95211-ML-127016418: RNCC: 2 | RNVC: 2
5.12.7203.1004.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-390-1188
Mounting Bracket

123901188
2300559-185400.001.0: RNCC: 2 | RNVC: 2
2300559-185400.001.0: RNCC: 3 | RNVC: 2

8 Oct 2012

5340-12-311-3649
Mending Plate

123113649
P-230229-307: RNCC: 3 | RNVC: 2
P230229-307: RNCC: 5 | RNVC: 2

24 Aug 1987

5340-12-344-3762
Mounting Bracket

123443762
A-566920-025: RNCC: 3 | RNVC: 2
A566920-025: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-196-9483
Angle Bracket

121969483
4900059-342015.000.0: RNCC: 3 | RNVC: 2
4900059-342015-000-0: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-701-6339
Mounting Plate

127016339
VG95211-ML-127016339: RNCC: 2 | RNVC: 2
5.12.7060.1240.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-312-5406
Angle Bracket

123125406
P-086485-402: RNCC: 3 | RNVC: 2
P086485-402: RNCC: 5 | RNVC: 2

15 Jan 1988

5340-12-340-1693
Spacing Threaded Standoff

123401693
87-401.30-02.00-17: RNCC: 3 | RNVC: 2
87-401.30-02.00-17/4: RNCC: 5 | RNVC: 2

9 Mar 1996

5340-12-305-2790
Dust And Moisture Seal Protective Plug

123052790
6.412-732.0: RNCC: 3 | RNVC: 2
6.412-732: RNCC: 5 | RNVC: 9
6-412-732: RNCC: 5 | RNVC: 9

16 Oct 1985

5340-12-123-4020
Spring Tension Clip

121234020
E6/10-5/06: RNCC: 3 | RNVC: 2
06-67830-0209: RNCC: 5 | RNVC: 2
06.67830-0209: RNCC: 5 | RNVC: 2
0667830-0209: RNCC: 5 | RNVC: 2
06678300209: RNCC: 5 | RNVC: 2
E6-10: RNCC: 5 | RNVC: 2
E6-10-5-06: RNCC: 5 | RNVC: 2
81.97430-0001: RNCC: 5 | RNVC: 2
81974300001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-340-1198
Mending Plate

123401198
726 22481 AAAA: RNCC: 3 | RNVC: 2
726 22481 AAAA-HDQA: RNCC: 5 | RNVC: 2
72622481AAAA: RNCC: 5 | RNVC: 2

1 Mar 1996

5340-12-359-6762
Double Angle Bracket

123596762
2500261-180000.212.0: RNCC: 2 | RNVC: 2
2500261-180000.212.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-304-1105
Rod End Clevis

123041105
4B23866/1: RNCC: 3 | RNVC: 2
4B23866-1: RNCC: 5 | RNVC: 2

12 Jun 1985

5340-12-198-1978
Plain Solid Disk

121981978
5255758: RNCC: 3 | RNVC: 2
52-55758-4: RNCC: 5 | RNVC: 2

29 Dec 1983

5340-12-391-4976
Nut And Bolt Locking Plate

123914976
3074-00-319100.100.0: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-349-9088
Angle Bracket

123499088
58R137-1348-9: RNCC: 2 | RNVC: 2
58R137-1348-9: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-12-702-9303
Angle Bracket

127029303
VG95211-ML-127029303: RNCC: 2 | RNVC: 2
5.93.7221.1202.98: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-173-7025
Access Cover

121737025
23176-207000.04.0: RNCC: 2 | RNVC: 2
23176-207000.04.0: RNCC: 3 | RNVC: 2
23176-207000.04.0: RNCC: 5 | RNVC: 2
23176-207000-04-0: RNCC: 5 | RNVC: 2
23176-207000-04-0: RNCC: 5 | RNVC: 9
23176-207000.04.0: RNCC: 5 | RNVC: 9

3 May 1978

5340-12-337-0827
Nonmetallic Bumper

123370827
DIN95364-A50X17-M10X28-NR75ST: RNCC: 2 | RNVC: 2
DIN95364A50X17-NR75ST: RNCC: 2 | RNVC: 2
25332/D-BSTN7590: RNCC: 5 | RNVC: 2
530054-M10X28.NR75.ST: RNCC: 5 | RNVC: 2
88.96210.0055: RNCC: 5 | RNVC: 2
88962100055: RNCC: 5 | RNVC: 2
VG95364-A50X17-M10X28-NR75ST: RNCC: 5 | RNVC: 9
VG95364A50X17-M10X28-NR75ST: RNCC: 5 | RNVC: 9
25-332-D-75SHORE: RNCC: 5 | RNVC: 9

18 Jan 1995

5340-12-199-6620
Electrical-Mechanical Equipment Post

121996620
VG95148C6XM3X10-NRST: RNCC: 2 | RNVC: 2
VG95148C6XM3X10-NRST: RNCC: 3 | RNVC: 2
351271301661: RNCC: 3 | RNVC: 2

19 May 1984

5340-12-141-8705
Butt Hinge

121418705
6010000: RNCC: 3 | RNVC: 2
23193-8400-16: RNCC: 5 | RNVC: 2
527-49-01-916: RNCC: 5 | RNVC: 2
44505: RNCC: 5 | RNVC: 2
23193-8400-16: RNCC: 5 | RNVC: 9
2332-408-302: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-177-2111
Loop Clamp

121772111
3604300143: RNCC: 3 | RNVC: 2

19 Jan 1979

5340-12-352-2266
Double Angle Bracket

123522266
5062032240: RNCC: 3 | RNVC: 2
506 203 22 40: RNCC: 5 | RNVC: 2

26 Oct 2000

5340-12-388-0772
Mounting Bracket

123880772
5801871640: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-12-178-7439

5340-12-181-1070
Bow Handle

121811070
81970015037: RNCC: 3 | RNVC: 2

24 Oct 1979

5340-12-392-6074
Bow Handle

123926074
GN565-20-100-SW: RNCC: 3 | RNVC: 2

21 Jun 2013

5340-12-387-4688
Spacing Threaded Standoff

123874688
5803674-205000.02: RNCC: 2 | RNVC: 2
78042 33502: RNCC: 5 | RNVC: 2

21 Dec 2011

5340-12-359-0649
Casement Fastener

123590649
1000-1B-140-50MM: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-332-7321
Lock-Release Lever

123327321
00009198810: RNCC: 3 | RNVC: 9
KW10.300-6013: RNCC: 5 | RNVC: 9

13 Sep 1993

5340-12-323-5480
Filler Opening Cap

123235480
NO PRIMARY REF 12-323-5480: RNCC: 3 | RNVC: 2
2648982: RNCC: 5 | RNVC: 2
21100-00-011: RNCC: 5 | RNVC: 9
B100A MIT KETTE: RNCC: 5 | RNVC: 9

6 Dec 1990

5340-12-327-7656
Access Cover

123277656
38012-0700.0199: RNCC: 2 | RNVC: 2
38012-0700.0199: RNCC: 3 | RNVC: 2

26 Feb 1992

5340-12-316-5389
Retaining Strap

123165389
2300033-331000-04: RNCC: 2 | RNVC: 2
2300033-331000-04: RNCC: 5 | RNVC: 9
2300033-331000-04: RNCC: 5 | RNVC: 9

24 Jan 1989

5340-12-332-5868
Access Cover

123325868
532117-2086.000: RNCC: 2 | RNVC: 2
532117-2086.000: RNCC: 3 | RNVC: 2
532117-2086.000: RNCC: 5 | RNVC: 9

25 Aug 1993

5340-12-349-9507
Loop Clamp

123499507
01172789: RNCC: 3 | RNVC: 2
4730-65-1000884: RNCC: 5 | RNVC: 9

27 Jan 2000

5340-12-333-3242
Flush Lock

123333242
1000-U150: RNCC: 3 | RNVC: 2
200-9302: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-12-371-2734
Retaining Strap

123712734
SK686-850600.025.0: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-12-197-7680
Angle Bracket

121977680
A-145401-035: RNCC: 3 | RNVC: 2
A145401-035: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-356-7527
Angle Bracket

123567527
523-061102.00.0: RNCC: 2 | RNVC: 2
523-061102.00.0: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-145-5799
Manual Control Handle

121455799
3922-0014-589122: RNCC: 3 | RNVC: 2
14NAN2059: RNCC: 5 | RNVC: 2
23176-208000.87.0: RNCC: 5 | RNVC: 2
23176-208000-87-0: RNCC: 5 | RNVC: 2
23176-208000-87-0: RNCC: 5 | RNVC: 9
23176-208000.87.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-0152
Webbing Strap

121970152
79016/SCHLAUFE-1070-340: RNCC: 3 | RNVC: 2
4900059-342023.000.0: RNCC: 3 | RNVC: 2
4900059-342023-000-0: RNCC: 5 | RNVC: 2

12 Sep 1983

5340-12-341-3394
Angle Bracket

123413394
52.3109.801.08: RNCC: 2 | RNVC: 2
52.3109.801.08: RNCC: 3 | RNVC: 2

27 Aug 1996

5340-12-344-4028
Double Angle Bracket

123444028
2300436-240011.000.0: RNCC: 3 | RNVC: 2

23 Oct 1997

5340-12-130-3089
Butt Hinge

121303089
9056475021: RNCC: 3 | RNVC: 2
2585-552-1: RNCC: 5 | RNVC: 2
90564 75021: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-366-8810
Swivel Caster

123668810
L-RD 280K: RNCC: 3 | RNVC: 2

18 Jun 2005

5340-12-350-4038
Retaining Strap

123504038
SL-3305: RNCC: 3 | RNVC: 2
SL 3305: RNCC: 5 | RNVC: 2

28 Mar 2000

5340-12-197-1262
Plain Solid Disk

121971262
81910010263: RNCC: 3 | RNVC: 2
81.91001-0263: RNCC: 5 | RNVC: 2

21 Sep 1983

5340-12-362-9362
Lock-Release Lever

123629362
215370: RNCC: 3 | RNVC: 2
93112-321: RNCC: 5 | RNVC: 9

17 Apr 2004

5340-12-702-6002
Loop Clamp

127026002
VG95211-ML-127026002: RNCC: 2 | RNVC: 2
5152A-25: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-351-0377
Mounting Bracket

123510377
3099-041000.07: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-318-3257
Mending Plate

123183257
6600015-201.001: RNCC: 3 | RNVC: 2
6600015-201.001: RNCC: 5 | RNVC: 9

30 Jun 1989

5340-12-169-2526
Resilient Mount

121692526
681-11850: RNCC: 3 | RNVC: 2
681-11850: RNCC: 5 | RNVC: 9

27 Apr 1977

5340-12-346-5490
Nonmetallic Bumper

123465490
DIN95364-C30X29-NR70ST: RNCC: 2 | RNVC: 2
DIN95364-C30X29-NR70ST: RNCC: 3 | RNVC: 2
VG95364-C30X29-NR70ST: RNCC: 5 | RNVC: 9

7 Aug 1998

5340-12-196-8417
Retaining Strap

121968417
FH30-351: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-12-312-5690
Helical Compression Spring Seat

123125690
4603225276: RNCC: 3 | RNVC: 2
5037-16: RNCC: 5 | RNVC: 2
ZR03225276: RNCC: 5 | RNVC: 2

19 Jan 1988

5340-12-321-9396
Manual Control Handle

123219396
582672: RNCC: 3 | RNVC: 2
3022-0009-582672: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-12-393-5040
Recess Handle

123935040
3233.2003: RNCC: 3 | RNVC: 2
3233-2003: RNCC: 5 | RNVC: 2

19 Sep 2013

5340-12-300-5228
Sealing Plug Assembly

123005228
E3-2005280: RNCC: 3 | RNVC: 2
E3-2005280: RNCC: 5 | RNVC: 9
E3-2005280: RNCC: 5 | RNVC: 9

9 Aug 1984

5340-12-316-6962
Resilient Mount

123166962
DIN95363-B50X20-M10X28-NR65ST: RNCC: 2 | RNVC: 2
81110-50X20-M10X28.NR65.ST: RNCC: 5 | RNVC: 2
25332/V-BSTN6590: RNCC: 5 | RNVC: 2
VG95363-B50X20-M10X28-NR65ST: RNCC: 5 | RNVC: 9

2 Feb 1989

5340-12-302-6667
Access Cover

123026667
41.36.42.00.23-2: RNCC: 3 | RNVC: 2
41-36-42-00-23-2: RNCC: 5 | RNVC: 2

22 Jan 1985

5340-12-185-6662
Loop Clamp

121856662
DIN3016-2-G1-88X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-88X20-W1-2: RNCC: 3 | RNVC: 2
DIN3016-G1-88X20-W1-2: RNCC: 5 | RNVC: 2
SP88/20SKZ: RNCC: 5 | RNVC: 2
SP88/20SKZ-W1: RNCC: 5 | RNVC: 2
84151-0200-01: RNCC: 5 | RNVC: 9
84151/0200-01: RNCC: 5 | RNVC: 9
SP88/20SKZ-PHOSPHATIERT: RNCC: 5 | RNVC: 9
VG95931-G88X20-W1: RNCC: 5 | RNVC: 9

23 Oct 1980

5340-12-701-6563
Mounting Bracket

127016563
VG95211-ML-127016563: RNCC: 2 | RNVC: 2
5.12.7208.8001.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-394-0181
Angle Bracket

123940181
7188345: RNCC: 3 | RNVC: 2

30 Oct 2013

5340-12-342-2640
Helical Compression Spring Seat

123422640
412570 201 25 03 90: RNCC: 3 | RNVC: 2

13 Jan 1997

5340-12-359-8475
Dust And Moisture Seal Protective Plug

123598475
350I46RAL3000: RNCC: 3 | RNVC: 2
350I46ROT: RNCC: 5 | RNVC: 2
GPN350-I46RAL3000: RNCC: 5 | RNVC: 2

13 Mar 2003

5340-12-364-6368
Angle Bracket

123646368
2654-350722.00: RNCC: 2 | RNVC: 2
2654-350722.00: RNCC: 3 | RNVC: 2

16 Oct 2004

5340-12-380-7747
Spacing Threaded Standoff

123807747
5802017-762300.00: RNCC: 2 | RNVC: 2
5802017-762300.00: RNCC: 3 | RNVC: 2

27 Nov 2009

5340-12-381-4863
Dust And Moisture Seal Protective Cap

123814863
L321M10X1001: RNCC: 3 | RNVC: 2

22 Feb 2010

5340-12-375-2114
Dust And Moisture Seal Protective Cap

123752114
1801350: RNCC: 3 | RNVC: 2

5 May 2008

5340-12-322-1983
Webbing Strap

123221983
E29302: RNCC: 3 | RNVC: 2

1 Aug 1990

5340-12-135-6519

5340-12-025-8692

5340-12-700-8766
Loop Clamp

127008766
VG95211-ML-127008766: RNCC: 2 | RNVC: 2
1667S-50-25: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-161-5739
Access Cover

121615739
100332-10000.02: RNCC: 2 | RNVC: 2
100332-10000-02: RNCC: 5 | RNVC: 2
100332-10000.02: RNCC: 5 | RNVC: 2
100332-10000-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-300-7359
Angle Bracket

123007359
5801997-110000.01: RNCC: 2 | RNVC: 2
5801997-110000.01: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-354-8354
Access Cover

123548354
8262-0018: RNCC: 2 | RNVC: 2
8262-0018: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-328-2436
Helical Compression Spring Retainer

123282436
4900259-109000-07-02: RNCC: 2 | RNVC: 2
536.50-12.07: RNCC: 3 | RNVC: 2
VS5026E164: RNCC: 5 | RNVC: 2
VS5026E164: RNCC: 5 | RNVC: 9

28 Apr 1992

5340-12-321-8464
Metal Runner

123218464
C117-A44-C71: RNCC: 2 | RNVC: 2
C117-A44-C71: RNCC: 3 | RNVC: 2

3 Jul 1990

5340-12-322-3138
Spring Tension Clip

123223138
170-053-050: RNCC: 3 | RNVC: 2

10 Aug 1990

5340-12-159-9826
Plain Solid Disk

121599826
234.130.008: RNCC: 3 | RNVC: 2
431.04943: RNCC: 5 | RNVC: 2
234-130-008: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-386-5731
Dust And Moisture Seal Protective Cap

123865731
S81514-00: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-306-0705
Angle Bracket

123060705
5801984-201040.002.0: RNCC: 2 | RNVC: 2
5801984-201040.002.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-148-3721
Resilient Mount

121483721
410-314-B-00.08: RNCC: 3 | RNVC: 2
80707101: RNCC: 3 | RNVC: 2
410-314B0008: RNCC: 5 | RNVC: 2
410-314-B-00.08: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-313-0368
Mending Plate

123130368
P-086151-001: RNCC: 3 | RNVC: 2
P086151-001: RNCC: 5 | RNVC: 2

1 Mar 1988

5340-12-191-5129
Resilient Mount

121915129
DIN95363-D75X40-NR65ST: RNCC: 2 | RNVC: 2
58238,NR65ST: RNCC: 5 | RNVC: 2
1.75.40.1A.65NR/ST: RNCC: 5 | RNVC: 2
81160-75X40-M12X37.NR65.ST: RNCC: 5 | RNVC: 2
58238BSTN6590: RNCC: 5 | RNVC: 2
58238SM650: RNCC: 5 | RNVC: 2
1011615000: RNCC: 5 | RNVC: 2
58238SM650: RNCC: 5 | RNVC: 9
VG95363-D75X40-NR65ST: RNCC: 5 | RNVC: 9
58238SM650: RNCC: 5 | RNVC: 9

8 Feb 1982

5340-12-344-4729
Mounting Bracket

123444729
A-244831-091: RNCC: 3 | RNVC: 2
A244831-091: RNCC: 5 | RNVC: 2

30 Oct 1997

5340-12-301-9872
Angle Bracket

123019872
A-243799-027: RNCC: 3 | RNVC: 2
A243799-027: RNCC: 5 | RNVC: 2

24 Nov 1984

5340-12-359-8639
Access Cover

123598639
2500261-183765.000.0: RNCC: 2 | RNVC: 2
2500261-183765.000.0: RNCC: 3 | RNVC: 2

17 Mar 2003

5340-12-365-2285
Nonmetallic Bumper

123652285
2500075-199610.000.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-309-8111
Butt Hinge Leaf

123098111
P-243813-017: RNCC: 3 | RNVC: 2
P243813-017: RNCC: 5 | RNVC: 2

5 Mar 1987

5340-12-700-8982
Rod End Connector

127008982
VG95211-ML-127008982: RNCC: 2 | RNVC: 2
2.11.5101.8890.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-173-7906
Nut And Bolt Locking Plate

121737906
PAN3408-08: RNCC: 3 | RNVC: 2

16 May 1978

5340-12-318-8566
Nonmetallic Bumper

123188566
VG95092B18X10X30X4,5X12NR70GRAU: RNCC: 2 | RNVC: 2
VG95092B18X10X30X4,5X12.NR70GRAU: RNCC: 3 | RNVC: 2
2001006: RNCC: 3 | RNVC: 2
118205: RNCC: 5 | RNVC: 2
123571: RNCC: 5 | RNVC: 2
4-176799: RNCC: 5 | RNVC: 2

22 Aug 1989

5340-12-701-6620
Blank Panel

127016620
VG95211-ML-127016620: RNCC: 2 | RNVC: 2
5.12.7210.1310.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-181-7762
Manual Control Handle

121817762
23356-9: RNCC: 3 | RNVC: 2
23356-9: RNCC: 3 | RNVC: 9

14 Dec 1979

5340-12-382-1007
Loop Clamp

123821007
EFP15004-3: RNCC: 3 | RNVC: 2

7 May 2010

5340-12-327-2721
Mounting Plate

123272721
1350.6,5.01.410: RNCC: 3 | RNVC: 2
1350.6.5.01.410: RNCC: 5 | RNVC: 2

3 Jan 1992

5340-12-174-1159
Helical Compression Spring Seat

121741159
8950712004: RNCC: 3 | RNVC: 2
1406687: RNCC: 5 | RNVC: 2
1695677: RNCC: 5 | RNVC: 2
42484052: RNCC: 5 | RNVC: 2
42484052EY5054-28: RNCC: 5 | RNVC: 2
0609372: RNCC: 5 | RNVC: 2
609372: RNCC: 5 | RNVC: 9

6 Jun 1978

5340-12-144-5577
Friction Catch

121445577
236: RNCC: 3 | RNVC: 2
3923: RNCC: 3 | RNVC: 2
480-035: RNCC: 5 | RNVC: 2
236: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-198-2861
Catch Strike

121982861
66.3527.610.03-A001: RNCC: 3 | RNVC: 2
769997: RNCC: 5 | RNVC: 2

11 Jan 1984

5340-12-315-6215
Access Cover

123156215
5803471-201820.01: RNCC: 2 | RNVC: 2
65.7789.453.01-A001: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-12-186-4649
Resilient Mount

121864649
JQ7-61-14C: RNCC: 3 | RNVC: 9
02518050: RNCC: 5 | RNVC: 2
2518050EZ5045-42: RNCC: 5 | RNVC: 2

5 Jan 1981

5340-12-314-4196
Mending Plate

123144196
C79451-A3085-B207: RNCC: 3 | RNVC: 2

6 Jul 1988

5340-12-340-0844
Spacing Threaded Standoff

123400844
2W132D002-2000.08: RNCC: 2 | RNVC: 2
2W132D002-2000.08: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-195-8011
Sealing Plug Assembly

121958011
MB700-040: RNCC: 3 | RNVC: 2
6913300010: RNCC: 5 | RNVC: 2

19 Apr 1983

5340-12-379-8941
Threaded Rod End

123798941
05932137: RNCC: 3 | RNVC: 2
CV168924: RNCC: 5 | RNVC: 2
05932137: RNCC: 5 | RNVC: 2

10 Sep 2009

5340-12-377-1979
Dust And Moisture Seal Protective Cap-Plug Set

123771979
300646: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-12-352-7479
Webbing Strap

123527479
6.373-650.0: RNCC: 3 | RNVC: 2
6.373-650: RNCC: 5 | RNVC: 2

12 Dec 2000

5340-12-348-0675
Angle Bracket

123480675
58R059-8441-2: RNCC: 2 | RNVC: 2
58R059-8441-2: RNCC: 3 | RNVC: 2

8 Apr 1999

5340-12-196-4759
Double Angle Bracket

121964759
C22156-A1000-B815: RNCC: 3 | RNVC: 2
C22156A1000B815: RNCC: 5 | RNVC: 2

11 Jul 1983

5340-12-195-8874
Retaining Strap

121958874
5801515-0020.001: RNCC: 3 | RNVC: 2
3620528705: RNCC: 5 | RNVC: 2
5801515-0020-001: RNCC: 5 | RNVC: 2
5801515-0020.001: RNCC: 5 | RNVC: 9
36205 28705: RNCC: 5 | RNVC: 9

27 Apr 1983

5340-12-334-4545
Mending Plate

123344545
702-241920-901-0: RNCC: 3 | RNVC: 2

10 May 1994

5340-12-702-5828
Mounting Bracket

127025828
VG95211-ML-127025828: RNCC: 2 | RNVC: 2
5.51.9204.0001.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-353-5084
Access Cover

123535084
2500238-060107.000.0: RNCC: 2 | RNVC: 2
2500238-060107.000.0: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-12-388-4400
Helical Compression Spring Seat

123884400
999899-000000.806.0: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-312-4809
Spring Tension Clip

123124809
2300216-180060.002.0: RNCC: 2 | RNVC: 2
2300216-180060.002.0: RNCC: 3 | RNVC: 2
604-68.13.121-19: RNCC: 3 | RNVC: 2

12 Jan 1988

5340-12-703-3079
Mending Plate

127033079
VG95211-ML-127033079: RNCC: 2 | RNVC: 2
5.12.2210.1608.02: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-324-2857
Electrical-Mechanical Equipment Post

123242857
VG95148C5,5XM3X15-2.0380.30-E2A: RNCC: 2 | RNVC: 2
5.13.153: RNCC: 3 | RNVC: 2
VG95148C5,5XM3X15-2.0380.30-E2A: RNCC: 3 | RNVC: 2
18H2030: RNCC: 3 | RNVC: 2

4 Feb 1991

5340-12-306-0504
Handle Grip

123060504
1865-010600.02.0: RNCC: 3 | RNVC: 9

23 Jan 1986

5340-12-168-0989
Butt Hinge

121680989
DIN7956-25X0,7-30-ST-MS: RNCC: 2 | RNVC: 2
A25DIN7956STVMS: RNCC: 5 | RNVC: 2

14 Feb 1977

5340-12-313-8234
Mounting Bracket

123138234
5803471-201360.00: RNCC: 2 | RNVC: 2
65.7789.435.00-A001: RNCC: 3 | RNVC: 2
5803471-201360.00: RNCC: 3 | RNVC: 2
5803471-201360.00: RNCC: 5 | RNVC: 2
65.7789.435.00: RNCC: 5 | RNVC: 2

10 May 1988

5340-12-313-6889
Mending Plate

123136889
4156-159: RNCC: 3 | RNVC: 2
177-0653: RNCC: 5 | RNVC: 2
177-0653: RNCC: 5 | RNVC: 9
4156-159: RNCC: 5 | RNVC: 9

26 Apr 1988

5340-12-382-8323
Mounting Plate

123828323
10113-012140.002.0: RNCC: 2 | RNVC: 2
10113-012140.002.0: RNCC: 3 | RNVC: 2

13 Aug 2010

5340-12-374-6743
Manual Control Handle

123746743
SK872-166430.003.0: RNCC: 3 | RNVC: 2
7081354: RNCC: 5 | RNVC: 2
1724571: RNCC: 5 | RNVC: 9

6 Mar 2008

5340-12-343-6901
Resilient Mount

123436901
DSM-250M: RNCC: 3 | RNVC: 2
DSM-250: RNCC: 5 | RNVC: 9

15 Jul 1997

5340-12-123-3132
Nonmetallic Bumper

121233132
F5550-19-10-08: RNCC: 3 | RNVC: 2
5550-19-10-08: RNCC: 5 | RNVC: 2
5550-19-10.08: RNCC: 5 | RNVC: 2
5550-19-10-08: RNCC: 5 | RNVC: 9
5550-19-10.08: RNCC: 5 | RNVC: 9
F5550-19-10-08: RNCC: 5 | RNVC: 9
F5550-19-10.08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-194-7450
Loop Clamp

121947450
N90045501: RNCC: 3 | RNVC: 2
N90045501: RNCC: 5 | RNVC: 2
5X8VW680-10: RNCC: 5 | RNVC: 2

3 Dec 1982

5340-12-304-5411
Retaining Strap

123045411
3379950132: RNCC: 3 | RNVC: 2

29 Jul 1985

5340-12-336-7088
Extension Drawer Slide

123367088
II-M18364: RNCC: 3 | RNVC: 2
2M18364: RNCC: 5 | RNVC: 2

12 Dec 1994

5340-12-166-2996
Retaining Strap

121662996
208460170010: RNCC: 3 | RNVC: 2
208460170010: RNCC: 5 | RNVC: 2
208460170010: RNCC: 5 | RNVC: 2

23 Jul 1976

5340-12-364-4797
Dust And Moisture Seal Protective Cap

123644797
000140400: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-378-1299
Mounting Bracket

123781299
41229118: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-12-364-1427
Nonmetallic Bumper

123641427
T621P1002283: RNCC: 3 | RNVC: 2

25 Aug 2004

5340-12-322-2221
Angle Bracket

123222221
1304 334 024: RNCC: 3 | RNVC: 2

2 Aug 1990

5340-12-180-6265
Mounting Bracket

121806265
02574713: RNCC: 3 | RNVC: 2
2574713ED5505-29: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-174-7859
Angle Bracket

121747859
02513587: RNCC: 3 | RNVC: 2
2513587EE5088-55: RNCC: 5 | RNVC: 2

3 Aug 1978

5340-12-324-6567
Electronic Equipment Hardware Kit

123246567
564.09.06.001: RNCC: 3 | RNVC: 2

12 Mar 1991

5340-12-306-7517
Plain Solid Disk

123067517
28.06.206-300.04: RNCC: 3 | RNVC: 2
286-206-300-040: RNCC: 5 | RNVC: 2

27 Mar 1986

5340-12-172-8958
Electrical-Mechanical Equipment Post

121728958
2995060047: RNCC: 3 | RNVC: 2
995-06-06-02-01: RNCC: 5 | RNVC: 2

2 Mar 1978

5340-12-357-7972
Nonmetallic Solid Wheel

123577972
J04130381-001: RNCC: 3 | RNVC: 2
1003780: RNCC: 5 | RNVC: 2

25 Jul 2002

5340-12-183-5566
Double Angle Bracket

121835566
844.25-21-00-00-004: RNCC: 3 | RNVC: 2
844-25-210000004: RNCC: 5 | RNVC: 9

29 Apr 1980

5340-12-350-5099
Metal Grille

123505099
FAST-301400.04: RNCC: 2 | RNVC: 2
FAST-301400.04: RNCC: 3 | RNVC: 2

6 Apr 2000

5340-12-372-7827
Mounting Plate

123727827
2300061-051934.000: RNCC: 2 | RNVC: 2
2300061-051934.000: RNCC: 3 | RNVC: 2

21 Aug 2007

5340-12-190-6825
Pad Eye

121906825
NO PRIMARY REF 12-190-6825: RNCC: 3 | RNVC: 2
5633 137149: RNCC: 5 | RNVC: 9
5633137149: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-337-8296
Mounting Bracket

123378296
9890420: RNCC: 3 | RNVC: 9
465-068351.000: RNCC: 5 | RNVC: 9

19 Apr 1995

5340-12-348-9623
Steel Beam Flange Clip

123489623
34362-1: RNCC: 3 | RNVC: 2

7 Sep 1999

5340-12-342-6192
Loop Clamp

123426192
0001-200000-902-0: RNCC: 2 | RNVC: 2
0001-200000-902-0: RNCC: 3 | RNVC: 2
0001-200000-902-0: RNCC: 5 | RNVC: 9

7 Mar 1997

5340-12-303-6208
Nonmetallic Bumper

123036208
704-125120-902-3: RNCC: 3 | RNVC: 2

15 Apr 1985

5340-12-149-3834
Dust And Moisture Seal Protective Plug

121493834
2360-132000.05.0: RNCC: 2 | RNVC: 2
2360-132000-05-0: RNCC: 5 | RNVC: 2
2360-132000-05-0: RNCC: 5 | RNVC: 2
2360-132000.05.0: RNCC: 5 | RNVC: 2
2360-132000.05.0: RNCC: 5 | RNVC: 2
2360-132000-05-0: RNCC: 5 | RNVC: 9
2360-132000.05.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-339-7101
Mounting Plate

123397101
2500255-000400.021.0: RNCC: 2 | RNVC: 2
2500255-000400.021.0: RNCC: 3 | RNVC: 2

29 Dec 1995

5340-12-306-4019
Mending Plate

123064019
V22.917.31-8: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-354-8766
Loop Clamp

123548766
37/0: RNCC: 3 | RNVC: 2

31 Aug 2001

5340-12-151-1191
Helical Compression Spring Seat

121511191
196C10002: RNCC: 3 | RNVC: 2
8200530025-45: RNCC: 5 | RNVC: 2
8200530025/45: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-158-4928
Loop Clamp

121584928
1205 8035: RNCC: 3 | RNVC: 2
12058035: RNCC: 5 | RNVC: 2
3.415.9.977.011.4: RNCC: 5 | RNVC: 2
3-415-9-977-011-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-195-3279
Lock-Release Lever

121953279
009-078.157-000: RNCC: 3 | RNVC: 2
0210601501OSO: RNCC: 3 | RNVC: 2
009-078.157-000: RNCC: 5 | RNVC: 2
009-078.157: RNCC: 5 | RNVC: 2
02106.15-1.4305-RAL9005: RNCC: 5 | RNVC: 2
02106.1508: RNCC: 5 | RNVC: 2
0210601501-1.4305: RNCC: 5 | RNVC: 2

7 Feb 1983

5340-12-144-2326
Spring Tension Clip

121442326
161092301: RNCC: 3 | RNVC: 2
7101-75-81-13: RNCC: 5 | RNVC: 2
7101-75-81.13: RNCC: 5 | RNVC: 2
7101-75-81-13: RNCC: 5 | RNVC: 9
7101-75-81.13: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-156-4181
Retaining Clip

121564181
DIN71805-S8: RNCC: 2 | RNVC: 2
DIN71805-S8: RNCC: 3 | RNVC: 2
DIN71805-S8-ST: RNCC: 5 | RNVC: 2
S8DIN71805: RNCC: 5 | RNVC: 2
S8DIN71805ST: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-173-4042
Butt Hinge Leaf

121734042
1121-60226.02: RNCC: 3 | RNVC: 2
1121-60226-02: RNCC: 5 | RNVC: 2

13 Apr 1978

5340-12-148-8273
Compression Cup

121488273
V5-1248-85NBR/151: RNCC: 3 | RNVC: 2
6-365-024: RNCC: 5 | RNVC: 2
V5-1248-23PA151: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-307-3068
Spring Tension Clip

123073068
F01-211160A05-0: RNCC: 3 | RNVC: 2

3 Jun 1986

5340-12-342-4314
Resilient Mount

123424314
CF-A-030-E-S-50: RNCC: 3 | RNVC: 2
GROESZE30: RNCC: 5 | RNVC: 9

7 Feb 1997

5340-12-388-0266
Loop Clamp

123880266
F1.1697-00-01-19.00-05: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-12-702-1714
Mounting Plate

127021714
VG95211-ML-127021714: RNCC: 2 | RNVC: 2
30.7117.90: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6499
Angle Bracket

127016499
VG95211-ML-127016499: RNCC: 2 | RNVC: 2
5.12.7205.1090.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-332-8760
Access Door

123328760
706-157000-000-0: RNCC: 3 | RNVC: 2

29 Sep 1993

5340-12-189-7709
Handwheel

121897709
VG85089-A-250X22-RG: RNCC: 2 | RNVC: 2
VG85089-A-250X22-RG: RNCC: 3 | RNVC: 2
VG85089-A-250X22-RG: RNCC: 3 | RNVC: 2
VG85089-A-250X22-RG: RNCC: 3 | RNVC: 9
A250X22VG85089-RG5: RNCC: 5 | RNVC: 9
A250X22VG85089GCUSN5ZNPB: RNCC: 5 | RNVC: 9
A250X22VG85089RG5: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-171-2553
Support Hook

121712553
81667200003: RNCC: 3 | RNVC: 2
23230-182800.002.0: RNCC: 5 | RNVC: 2
23230-182800-002-0: RNCC: 5 | RNVC: 9
23230-182800.002.0: RNCC: 5 | RNVC: 9

21 Sep 1977

5340-12-301-4712
Spring Tension Clip

123014712
2500109-193400.01.0: RNCC: 3 | RNVC: 2
2500109-193400-01-0: RNCC: 5 | RNVC: 2
2500109-193400-01-0: RNCC: 5 | RNVC: 9
2500109-193400.01.0: RNCC: 5 | RNVC: 9

18 Oct 1984

5340-12-314-1061
Mounting Bracket

123141061
E-4782-01-45: RNCC: 3 | RNVC: 2
E4782-01-45: RNCC: 5 | RNVC: 2

8 Jun 1988

5340-12-197-0918
Angle Bracket

121970918
1000154-000.04: RNCC: 2 | RNVC: 2
512.00-00.04: RNCC: 3 | RNVC: 2
1000154-0.04: RNCC: 5 | RNVC: 9

19 Sep 1983

5340-12-162-0247
Nut And Bolt Locking Plate

121620247
4072 304 023: RNCC: 3 | RNVC: 2
4072304023: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-8683
Mounting Bracket

123138683
3525440538: RNCC: 3 | RNVC: 2
469066: RNCC: 5 | RNVC: 2
352 544 05 38: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-362-9825
Multiple Angle Bracket

123629825
4608600914: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-12-314-0847
Mending Plate

123140847
43712653-601: RNCC: 2 | RNVC: 2
43712653-601: RNCC: 3 | RNVC: 2

4 Jun 1988

5340-12-164-8289

5340-12-343-7220
Mounting Bracket

123437220
3660921240: RNCC: 3 | RNVC: 2
WRYUG2038: RNCC: 5 | RNVC: 9

17 Jul 1997

5340-12-321-6263
Access Cover

123216263
026899: RNCC: 3 | RNVC: 2

8 Jun 1990

5340-12-360-2131
Mounting Bracket

123602131
0855 1199.091: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-372-4539
Casement Fastener

123724539
11301412300: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-12-358-1158
Retaining Band

123581158
81974450199: RNCC: 3 | RNVC: 2
81.97445.0199: RNCC: 5 | RNVC: 2

16 Sep 2002

5340-12-350-0656
Angle Bracket

123500656
T263M1023101: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-12-026-7966

5340-12-371-5405
Loop Clamp

123715405
0002209-808: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-12-191-4716
Flush Catch Claw

121914716
114015: RNCC: 3 | RNVC: 2

4 Feb 1982

5340-12-041-0749

5340-12-384-7089
Padlock

123847089
I002533: RNCC: 3 | RNVC: 2

22 Mar 2011

5340-12-372-3928
Mending Plate

123723928
S252M3113210: RNCC: 2 | RNVC: 2
S252M3113210: RNCC: 3 | RNVC: 2

12 Jul 2007

5340-12-369-4797
Spring Tension Clip

123694797
90217705: RNCC: 3 | RNVC: 2
0807801: RNCC: 5 | RNVC: 2

10 Jul 2006

5340-12-303-5813
Mending Plate

123035813
81974850610: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-145-8200
Butt Hinge Leaf

121458200
1192: RNCC: 3 | RNVC: 9
1192: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-702-5764
Mounting Bracket

127025764
VG95211-ML-127025764: RNCC: 2 | RNVC: 2
5.51.7801.0040.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-321-7047
Metal Runner

123217047
702-183020-905-0: RNCC: 3 | RNVC: 2

18 Jun 1990

5340-12-701-6959
Angle Bracket

127016959
VG95211-ML-127016959: RNCC: 2 | RNVC: 2
5.12.7222.8002.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-355-7309
Mounting Bracket

123557309
P-876386-411: RNCC: 3 | RNVC: 2
P876386-411: RNCC: 5 | RNVC: 2

11 Dec 2001

5340-12-358-0395
Runner

123580395
S68904-01-6-157: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-12-337-6554
Angle Bracket

123376554
E5074-403-5: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-12-702-5277
Mounting Plate

127025277
VG95211-ML-127025277: RNCC: 2 | RNVC: 2
5.51.7010.0670.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-318-7740
Spring Tension Clip

123187740
6100125-0163: RNCC: 2 | RNVC: 2
850/3: RNCC: 3 | RNVC: 2
0745252334: RNCC: 5 | RNVC: 2

16 Aug 1989

5340-12-318-6855
Angle Bracket

123186855
704-127200-904-0: RNCC: 3 | RNVC: 2

8 Aug 1989

5340-12-337-0742
Mending Plate

123370742
03.232.35.02.0: RNCC: 3 | RNVC: 2
6408742: RNCC: 5 | RNVC: 2
E-03.232.35.02.0: RNCC: 5 | RNVC: 9

17 Jan 1995

5340-12-389-6728
Loop Clamp

123896728
DIN3016-1-E1-23X15-W1-2-CR: RNCC: 2 | RNVC: 2

9 Aug 2012

5340-12-702-4766
Mounting Plate

127024766
VG95211-ML-127024766: RNCC: 2 | RNVC: 2
5.51.0605.0180.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-368-2910
Retaining Strap

123682910
6.376-745.0: RNCC: 3 | RNVC: 2
G3 400 103 2212DT: RNCC: 5 | RNVC: 2

10 Feb 2006

5340-12-190-1433
Retaining Strap

121901433
CF455227A: RNCC: 3 | RNVC: 2
CF 455 227 A: RNCC: 5 | RNVC: 2
CF455227A: RNCC: 5 | RNVC: 2
CF 455 227 A: RNCC: 5 | RNVC: 2

10 Nov 1981

5340-12-324-9276
Sealing Plug Assembly

123249276
763.001.5: RNCC: 3 | RNVC: 2
251.1.1.1.4.12: RNCC: 5 | RNVC: 2

10 Apr 1991

5340-12-372-2846
Mounting Plate

123722846
S931I80A1211: RNCC: 3 | RNVC: 2

4 Jul 2007

5340-12-379-8904
Mending Plate

123798904
120D152300.009.0: RNCC: 3 | RNVC: 2

10 Sep 2009

5340-12-379-9714
Elastic Strap

123799714
CF 453 473 U: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-12-379-1691
Rim Lock

123791691
1.40.0501.0: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-12-180-7177
Escutcheon Plate

121807177
583A003: RNCC: 3 | RNVC: 2
3147680095: RNCC: 5 | RNVC: 2
583K0005-2: RNCC: 5 | RNVC: 2

28 Sep 1979

5340-12-391-0133
Spacing Threaded Standoff

123910133
107W163370.002.0: RNCC: 2 | RNVC: 2
107W163370.002.0: RNCC: 3 | RNVC: 2

15 Jan 2013

5340-12-186-6428
Expansion Plug

121866428
CF4156390R: RNCC: 3 | RNVC: 2
CF 415 639 -R: RNCC: 5 | RNVC: 2
CF4156390R: RNCC: 5 | RNVC: 2
CF4156390R: RNCC: 5 | RNVC: 2
CF 415 639 -R: RNCC: 5 | RNVC: 2

23 Jan 1981

5340-12-310-4372
Shelf Bracket

123104372
5801758-0720.00: RNCC: 2 | RNVC: 2
5801758-0720.00: RNCC: 3 | RNVC: 2

22 May 1987

5340-12-700-1974
Dust And Moisture Seal Protective Cap

127001974
51-260445094: RNCC: 2 | RNVC: 2
765-17-28: RNCC: 3 | RNVC: 2

5 Nov 1991

5340-12-357-7565
Turnbuckle Body

123577565
DIN1479-SP-M8-A2P: RNCC: 2 | RNVC: 2

19 Jul 2002

5340-12-362-2736
Double Angle Bracket

123622736
J21520088-403: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-306-6070
Butt Hinge Leaf

123066070
28.04.206-031.02: RNCC: 3 | RNVC: 2
284-206-031-020: RNCC: 5 | RNVC: 2

14 Mar 1986

5340-12-702-1619
Mounting Bracket

127021619
VG95211-ML-127021619: RNCC: 2 | RNVC: 2
30.6461.30: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-171-7676
Expansion Shield

121717676
RAWL-ANKERSCHALEG M12: RNCC: 3 | RNVC: 2
388: RNCC: 5 | RNVC: 2
GM12: RNCC: 5 | RNVC: 9

11 Nov 1977

5340-12-304-5206
Retaining Strap

123045206
5801445-30310.01: RNCC: 2 | RNVC: 2
5801445-30310.01: RNCC: 3 | RNVC: 2
5801445-30310.01: RNCC: 5 | RNVC: 9

26 Jul 1985

5340-12-196-6541
Angle Bracket

121966541
5801445-30095: RNCC: 2 | RNVC: 2
5801445-30095: RNCC: 3 | RNVC: 2

27 Jul 1983

5340-12-131-5385
Door Button

121315385
DIN7463-A1-6BK: RNCC: 2 | RNVC: 2
6020131: RNCC: 3 | RNVC: 2
A1-6DIN7463R0H: RNCC: 5 | RNVC: 2
A6DIN7463R0H: RNCC: 5 | RNVC: 2
50201: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-393-0911
Access Cover

123930911
V6555X03025-083: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-12-393-7734
Lock-Release Lever

123937734
03-200.00-02.08-00: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-12-326-3357
Flush Door Ring

123263357
2702087500: RNCC: 3 | RNVC: 2
27020-87500: RNCC: 5 | RNVC: 9

2 Sep 1991

5340-12-375-8819
Mechanical Stop

123758819
21.7381-01-11-00.00-22: RNCC: 3 | RNVC: 2

16 Jul 2008

5340-12-195-1745
Detent Plunger

121951745
009-082.200-002: RNCC: 2 | RNVC: 2
4900137-350000.002: RNCC: 2 | RNVC: 2
009-082.200-002: RNCC: 3 | RNVC: 2
4900137-350000-002: RNCC: 5 | RNVC: 9
4900137-350000.002: RNCC: 5 | RNVC: 9

20 Jan 1983

5340-12-306-1427
Hand Carrying Strap Assembly

123061427
T12949: RNCC: 3 | RNVC: 2
T12949: RNCC: 5 | RNVC: 9

30 Jan 1986

5340-12-198-5393
Retaining Strap

121985393
160-744442-31: RNCC: 3 | RNVC: 2
160-744442-31: RNCC: 5 | RNVC: 9

7 Feb 1984

5340-12-355-4836
Angle Bracket

123554836
3561.022.2: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-168-1609
Retaining Strap

121681609
WW410774A: RNCC: 3 | RNVC: 2
WW 410 774 A: RNCC: 5 | RNVC: 2
WW410774A: RNCC: 5 | RNVC: 2
WW410774A: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-349-7963
Handle Grip

123497963
61 31 2 315 222: RNCC: 3 | RNVC: 2

10 Jan 2000

5340-12-368-9412
Rim Latch Set

123689412
1030010-180850.000.0: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-368-6267
Extension Drawer Slide

123686267
425.34.967: RNCC: 3 | RNVC: 2
0.425.34.967: RNCC: 5 | RNVC: 2

30 Mar 2006

5340-12-381-4513
Dust And Moisture Seal Protective Cap-Plug

123814513
Z=30445: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-12-333-5939
Mounting Plate

123335939
5 855 286: RNCC: 3 | RNVC: 2
81.67165.2156: RNCC: 5 | RNVC: 2
81671652156: RNCC: 5 | RNVC: 2

11 Jan 1994

5340-12-383-2777
Manual Control Handle

123832777
GN 212.5-24-M8-E: RNCC: 3 | RNVC: 2
OC0021: RNCC: 5 | RNVC: 2

30 Sep 2010

5340-12-302-9268
Mending Plate

123029268
44-31682: RNCC: 3 | RNVC: 2
272548: RNCC: 5 | RNVC: 2

8 Feb 1985

5340-12-378-2886
Spacing Threaded Standoff

123782886
J04823262-027: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-12-700-9228
Loop Clamp

127009228
VG95211-ML-127009228: RNCC: 2 | RNVC: 2
200N-75: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-181-4655
Dust And Moisture Seal Protective Plug

121814655
H8: RNCC: 3 | RNVC: 2

26 Nov 1979

5340-12-366-7757
Dust And Moisture Seal Protective Cap

123667757
CBD32505P04: RNCC: 3 | RNVC: 2

7 Jun 2005

5340-12-195-0169
Mending Plate

121950169
4671431: RNCC: 3 | RNVC: 2
467.1431: RNCC: 5 | RNVC: 2

30 Dec 1982

5340-12-381-6496
Access Cover

123816496
200910: RNCC: 3 | RNVC: 2
89532804: RNCC: 5 | RNVC: 2

12 Mar 2010

5340-12-326-7106
Helical Compression Spring Retainer

123267106
2420521002: RNCC: 3 | RNVC: 2
2420521002: RNCC: 5 | RNVC: 2

22 Oct 1991

5340-12-353-4839
Access Cover

123534839
5802017-716500.00: RNCC: 2 | RNVC: 2
5802017-716500.00: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-12-376-7889
Nut And Bolt Retainer

123767889
5610980073: RNCC: 3 | RNVC: 2
5610980073: RNCC: 5 | RNVC: 2

6 Nov 2008

5340-12-337-0813
Mounting Bracket

123370813
81415065041: RNCC: 3 | RNVC: 2
81.41506.5041: RNCC: 5 | RNVC: 2

18 Jan 1995

5340-12-304-3423
Mending Plate

123043423
6220-70: RNCC: 3 | RNVC: 2

8 Jul 1985

5340-12-378-0008
Dust And Moisture Seal Protective Plug

123780008
504240104: RNCC: 3 | RNVC: 2

4 Mar 2009

5340-12-372-1897
Nonmetallic Bumper

123721897
L524M1019213: RNCC: 3 | RNVC: 2

26 Jun 2007

5340-12-349-2718
Double Angle Bracket

123492718
1001-056-000-51: RNCC: 3 | RNVC: 2
7823150236: RNCC: 5 | RNVC: 2

19 Oct 1999

5340-12-306-0940
Lock-Release Lever

123060940
06430-1061X60: RNCC: 3 | RNVC: 2
NLM643-1061X60: RNCC: 5 | RNVC: 9
NLM6430-1061X60: RNCC: 5 | RNVC: 9

27 Jan 1986

5340-12-329-0340
Loop Clamp

123290340
DIN3015-LG-3R-25-PA6-W1: RNCC: 2 | RNVC: 2
RANR16-325: RNCC: 3 | RNVC: 2
325PA-DP-AS: RNCC: 3 | RNVC: 2
RANR16-325: RNCC: 5 | RNVC: 2
DIN3015-LG-3R-25-PA-W1: RNCC: 5 | RNVC: 2
VG95932C3-25-PA-W1: RNCC: 5 | RNVC: 9

11 Jul 1992

5340-12-155-5803
Spring Tension Clip

121555803
160-73489-06: RNCC: 3 | RNVC: 2
160-73489-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-342-6115
Runner

123426115
6 223 002 211: RNCC: 3 | RNVC: 2

6 Mar 1997

5340-12-042-1626

5340-12-349-2698
Angle Bracket

123492698
T524M1509201: RNCC: 3 | RNVC: 2

19 Oct 1999

5340-12-327-9273
Hand Crank

123279273
G24930-A6-C6: RNCC: 3 | RNVC: 2

20 Mar 1992

5340-12-184-0782
Bow Handle

121840782
62-6750-440-00: RNCC: 3 | RNVC: 2

24 Jun 1980

5340-12-368-2332
Expansion Plug

123682332
DIN443-A32-A3L: RNCC: 2 | RNVC: 2

12 Jan 2006

5340-12-311-9458
Helical Compression Spring Seat

123119458
F11.11372-0003: RNCC: 3 | RNVC: 2

2 Nov 1987

5340-12-173-1501
Plain Solid Disk

121731501
116-100-0423-001: RNCC: 3 | RNVC: 2

22 Mar 1978

5340-12-301-7658
Nonmetallic Bumper

123017658
4179140: RNCC: 3 | RNVC: 2
1280-037: RNCC: 5 | RNVC: 2
S12B.K02.09.00.008: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-342-8300
Retaining Strap

123428300
VG95211-ML-123428300: RNCC: 2 | RNVC: 2
000000-0073.642: RNCC: 3 | RNVC: 2
000000-0073.642: RNCC: 5 | RNVC: 2
000000-0073.642: RNCC: 5 | RNVC: 9

8 Apr 1997

5340-12-343-1750
Mounting Bracket

123431750
5502-524: RNCC: 3 | RNVC: 2

13 May 1997

5340-12-357-4048
Access Cover

123574048
J92228412-001: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-12-314-6713
Electrical-Mechanical Equipment Post

123146713
512214-3761.000: RNCC: 3 | RNVC: 2
512214-3761: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-148-6245
Door Handle

121486245
VG75111-C52: RNCC: 2 | RNVC: 2
C52VDA75111: RNCC: 5 | RNVC: 2
C52VG75111: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-327-0952
Padlock

123270952
85MB/30MK: RNCC: 3 | RNVC: 2

29 Nov 1991

5340-12-378-0587
Mounting Bracket

123780587
320.001-057: RNCC: 3 | RNVC: 2

10 Mar 2009

5340-12-199-5332
Webbing Strap

121995332
5801435-010630.00: RNCC: 2 | RNVC: 2
5801435-010630-00: RNCC: 5 | RNVC: 2
5801435-010630.00: RNCC: 5 | RNVC: 2
5801435-010630.00: RNCC: 5 | RNVC: 9

9 May 1984

5340-12-144-1824
Retaining Strap

121441824
162673902: RNCC: 3 | RNVC: 2
E7101-51-01-41: RNCC: 5 | RNVC: 2
E7101-51-01.41: RNCC: 5 | RNVC: 2
7101-51-01-41: RNCC: 5 | RNVC: 2
7101-51-01.41: RNCC: 5 | RNVC: 2
7101-51-01-41: RNCC: 5 | RNVC: 9
7101-51-01.41: RNCC: 5 | RNVC: 9
E7101-51-01-41: RNCC: 5 | RNVC: 9
E7101-51-01.41: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-332-8860
Expansion Plug

123328860
DIN443-B40-ST-PHR: RNCC: 2 | RNVC: 2
0115 1199: RNCC: 5 | RNVC: 2
01151199ES8928-60: RNCC: 5 | RNVC: 2
DIN443-B40-MNPHR10F: RNCC: 5 | RNVC: 2
B40DIN443PHR: RNCC: 5 | RNVC: 9

30 Sep 1993

5340-12-701-9979
Loop Clamp

127019979
VG95211-ML-127019979: RNCC: 2 | RNVC: 2
155N464-97: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-317-2885
Butt Hinge Leaf

123172885
4312 712 47400: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-320-0940
Nut And Bolt Locking Plate

123200940
53271090000: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-12-370-0668
Retaining Strap

123700668
9381 4452: RNCC: 3 | RNVC: 2

14 Sep 2006

5340-12-320-1689
Headless Straight Rod

123201689
1083001: RNCC: 3 | RNVC: 2

14 Dec 1989

5340-12-197-5868
Mending Plate

121975868
A-145335-405: RNCC: 3 | RNVC: 2
A145335-405: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-303-2439
Double Angle Bracket

123032439
P-886673-001: RNCC: 3 | RNVC: 2
P886673-001: RNCC: 5 | RNVC: 2

8 Mar 1985

5340-12-136-7704
Retaining Strap

121367704
4042330341: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-339-0890
Door Holder

123390890
40 0165 998: RNCC: 2 | RNVC: 2
40 0165 998: RNCC: 3 | RNVC: 2
40 0165 998: RNCC: 5 | RNVC: 9

10 Oct 1995

5340-12-329-3217
Recess Handle

123293217
1567159: RNCC: 3 | RNVC: 2

5 Aug 1992

5340-12-701-1547
Mounting Plate

127011547
VG95211-ML-127011547: RNCC: 2 | RNVC: 2
5.12.0220.1740.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-1683
Mounting Bracket

127021683
VG95211-ML-127021683: RNCC: 2 | RNVC: 2
30.7100.3250: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-183-9884
Angle Bracket

121839884
42023736: RNCC: 3 | RNVC: 2
42023736EZ5004-26: RNCC: 5 | RNVC: 9

10 Jun 1980

5340-12-359-1572
Multiple Angle Bracket

123591572
J92228197-401: RNCC: 3 | RNVC: 2

6 Jan 2003

5340-12-702-1690
Mounting Bracket

127021690
VG95211-ML-127021690: RNCC: 2 | RNVC: 2
30.7103.70: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-8508
Snap Hook

127028508
52-04066121027: RNCC: 2 | RNVC: 2

3 Jan 1996

5340-12-356-7258
Mounting Bracket

123567258
160-24077-16: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-12-322-4375
Retaining Strap

123224375
4-162618: RNCC: 3 | RNVC: 2
139110: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-12-346-2556
Seal Retaining Plate

123462556
81907130154: RNCC: 3 | RNVC: 2
1312 332 028: RNCC: 3 | RNVC: 2
571809808: RNCC: 3 | RNVC: 2
1312332028: RNCC: 5 | RNVC: 2
1PA39630-113044: RNCC: 5 | RNVC: 2
(241)A39630-113044: RNCC: 5 | RNVC: 2
0-113044: RNCC: 8 | RNVC: 2

3 Jul 1998

5340-12-701-6345
Angle Bracket

127016345
5.12.7060.1450.42: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-344-0190
Plug Button

123440190
4.1306: RNCC: 3 | RNVC: 2
7307339: RNCC: 5 | RNVC: 2

29 Aug 1997

5340-12-701-6393
Mounting Plate

127016393
5.12.7070.8010.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-352-4960
Angle Bracket

123524960
521910-820340.000.0: RNCC: 2 | RNVC: 2
521910-820340.000.0: RNCC: 3 | RNVC: 2
1272566: RNCC: 5 | RNVC: 2
22013.0.11.056.00: RNCC: 5 | RNVC: 9

22 Nov 2000

5340-12-392-1551
Multiple Angle Bracket

123921551
DW 205 411 A: RNCC: 3 | RNVC: 2
DW 205 411 A: RNCC: 5 | RNVC: 2

8 May 2013

5340-12-321-2720
Mending Plate

123212720
150-3.4.500: RNCC: 3 | RNVC: 2

26 Apr 1990

5340-12-394-2110
Mounting Plate

123942110
1079258-2: RNCC: 3 | RNVC: 2

12 Nov 2013

5340-12-349-7958
Dust And Moisture Seal Boot

123497958
34 31 2 314 092: RNCC: 3 | RNVC: 2

10 Jan 2000

5340-12-143-0077
Loop Clamp

121430077
DIN3016-1-E2-24-28X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU0.24-28/15: RNCC: 3 | RNVC: 2
DIN3016-E2-24-28X15-W1-2: RNCC: 3 | RNVC: 2
4209105024: RNCC: 5 | RNVC: 2
RSGU24-28-15: RNCC: 5 | RNVC: 2
RSGU24-28/15: RNCC: 5 | RNVC: 2
DIN3016-E2-24-28X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-6761
Retaining Strap

121786761
VG95933DR-28-W1-BK: RNCC: 2 | RNVC: 2
2/1G28MMN325: RNCC: 3 | RNVC: 2
2-1G28MMN325: RNCC: 5 | RNVC: 2

9 May 1979

5340-12-334-5626
Loop Clamp

123345626
DIN3016-2-G1-44X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-44X15-W1-2: RNCC: 3 | RNVC: 2
SP44/15SKZ-W1: RNCC: 3 | RNVC: 2
102062044153: RNCC: 5 | RNVC: 2
10.2062.04.41.53: RNCC: 5 | RNVC: 2
102062044153: RNCC: 5 | RNVC: 2
10.2062.04.41.53: RNCC: 5 | RNVC: 2
SP44/15SKZ: RNCC: 5 | RNVC: 2
DIN3016-G1-44X15W1-2: RNCC: 5 | RNVC: 9

25 May 1994

5340-12-173-8455
Nonmetallic Bumper

121738455
1200028-1300.009: RNCC: 2 | RNVC: 2
PLATTE 30X20X1,5.PUR96: RNCC: 3 | RNVC: 2
330101-3009.000: RNCC: 3 | RNVC: 2
330101-3009: RNCC: 5 | RNVC: 2
1200028-1300.009: RNCC: 5 | RNVC: 2
330101-3009.000: RNCC: 5 | RNVC: 9
1200028-1300-009: RNCC: 5 | RNVC: 9

16 May 1978

5340-12-305-2594
Angle Bracket

123052594
4900059-121408.000.0/2: RNCC: 3 | RNVC: 2
4900059-121408.002.0: RNCC: 5 | RNVC: 2

15 Oct 1985

5340-12-701-3789
Mounting Plate

127013789
VG95211-ML-127013789: RNCC: 2 | RNVC: 2
5.12.5305.1030.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-387-5629
Bow Handle

123875629
GN565.1-26-196-BL: RNCC: 3 | RNVC: 2
11-551-26 196: RNCC: 5 | RNVC: 2

10 Jan 2012

5340-12-303-3616
Retaining Strap

123033616
708-121120-001-0: RNCC: 3 | RNVC: 2

18 Mar 1985

5340-12-330-2285
Resilient Mount

123302285
HL6.80/17C.21: RNCC: 3 | RNVC: 9
0744096: RNCC: 5 | RNVC: 2
3-0744-096: RNCC: 5 | RNVC: 2
8450106: RNCC: 5 | RNVC: 2

18 Nov 1992

5340-12-702-5773
Mounting Bracket

127025773
VG95211-ML-127025773: RNCC: 2 | RNVC: 2
5.51.7802.0070.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-3655
Bail Handle

123073655
1098-S2: RNCC: 3 | RNVC: 2
610129-161: RNCC: 5 | RNVC: 2
FT6100129-161: RNCC: 5 | RNVC: 2
3757746: RNCC: 5 | RNVC: 2
3757746EY3131-80: RNCC: 5 | RNVC: 2

10 Jun 1986

5340-12-311-3758
Angle Bracket

123113758
2300227-188331.000: RNCC: 2 | RNVC: 2
2300227-188331.000: RNCC: 3 | RNVC: 2
2300227-188331.000: RNCC: 5 | RNVC: 9

25 Aug 1987

5340-12-376-9024
Vent Plug

123769024
EE-M0033-14: RNCC: 3 | RNVC: 2

20 Nov 2008

5340-12-342-2555
Dust And Moisture Seal Protective Cap

123422555
AFG0339120: RNCC: 3 | RNVC: 2
AFG17-01-09-01-49: RNCC: 5 | RNVC: 2

13 Jan 1997

5340-12-130-6502
Retaining Strap

121306502
DIN72573-3X15-ST-VERZINKT: RNCC: 2 | RNVC: 2
DIN72573-3X15-ST-VERZINKT: RNCC: 3 | RNVC: 2
DIN72573-3X15-ST-VERZINKT: RNCC: 3 | RNVC: 2
DIN72573-3X15-ST-GALZN8: RNCC: 5 | RNVC: 2
3X15DIN72573STVERZINKT: RNCC: 5 | RNVC: 2
3X15DIN72573STVZK: RNCC: 5 | RNVC: 2
DIN72573-3X15-ST-GALZN8: RNCC: 5 | RNVC: 2
5128980315: RNCC: 5 | RNVC: 2
BSL3X15/72573VPE: RNCC: 5 | RNVC: 2
945545: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-367-1101
Mounting Bracket

123671101
950154277: RNCC: 3 | RNVC: 2
3201-860.02.00.055-000: RNCC: 5 | RNVC: 2

11 Jul 2005

5340-12-192-0164
Nonmetallic Bumper

121920164
5900025-0000.012: RNCC: 3 | RNVC: 2
5900025-0000.012: RNCC: 5 | RNVC: 9

22 Mar 1982

5340-12-172-8823
Electrical-Mechanical Equipment Post

121728823
VG95148B6XM3X15-ST: RNCC: 2 | RNVC: 2
VG95148B6XM3X15-ST: RNCC: 3 | RNVC: 2
0801-0200: RNCC: 3 | RNVC: 2
0801-02: RNCC: 5 | RNVC: 9

27 Feb 1978

5340-12-317-1980
Dust And Moisture Seal Protective Plug

123171980
3226840023: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-346-2550
Access Cover

123462550
0969179: RNCC: 3 | RNVC: 2
0969179: RNCC: 5 | RNVC: 2

3 Jul 1998

5340-12-145-8201
Butt Hinge

121458201
1193: RNCC: 3 | RNVC: 9
1193: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-315-9987
Angle Bracket

123159987
4602851040: RNCC: 3 | RNVC: 2

14 Dec 1988

5340-12-344-6426

5340-12-190-8748
Helical Compression Spring Seat

121908748
2410500008: RNCC: 3 | RNVC: 2
8690740059: RNCC: 5 | RNVC: 2

21 Dec 1981

5340-12-319-6282
Rod End Clevis

123196282
5801411-69053.002: RNCC: 3 | RNVC: 2

19 Oct 1989

5340-12-192-1523
Webbing Strap

121921523
2898266: RNCC: 3 | RNVC: 2
289.8266: RNCC: 5 | RNVC: 2

29 Mar 1982

5340-12-179-6293
Retaining Band

121796293
4354700040: RNCC: 3 | RNVC: 2
4354700040: RNCC: 5 | RNVC: 2

13 Jul 1979

5340-12-199-5325
Support Hook

121995325
2300089-100100.02: RNCC: 2 | RNVC: 2
2300089-100100.02: RNCC: 3 | RNVC: 2
2300089-100100-02: RNCC: 5 | RNVC: 9
2300089-100100.02: RNCC: 5 | RNVC: 9
9844687: RNCC: 5 | RNVC: 9

9 May 1984

5340-12-166-9096
Retaining Strap

121669096
5800748-11.141: RNCC: 3 | RNVC: 2
5800748-11-141: RNCC: 5 | RNVC: 9

29 Oct 1976

5340-12-162-9254
Grooved Clamp Coupling

121629254
1899-1900: RNCC: 3 | RNVC: 2
1918-121600-027: RNCC: 5 | RNVC: 2
1918-121600-027: RNCC: 5 | RNVC: 9
1918-121600.027: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-384-9285
Loop Clamp

123849285
RSG1.12/15-W3: RNCC: 3 | RNVC: 2
41231071 TEIL 41231078: RNCC: 5 | RNVC: 2
41231078: RNCC: 5 | RNVC: 2

11 Apr 2011

5340-12-334-3520
Spacing Threaded Standoff

123343520
VG95148B6XM3X23-ST: RNCC: 2 | RNVC: 2
VG95148-B6XM3X23-ST: RNCC: 3 | RNVC: 2
DI38: RNCC: 3 | RNVC: 9
DI38: RNCC: 5 | RNVC: 2

29 Apr 1994

5340-12-345-4011
Grooved Clamp Coupling Ferrule

123454011
VG95211-ML-123454011: RNCC: 2 | RNVC: 2
AE102-20FG: RNCC: 3 | RNVC: 2

10 Mar 1998

5340-12-358-3175
Mounting Plate

123583175
58R059-84611-13: RNCC: 2 | RNVC: 2
58R059-84611-13: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-12-310-0149
Nonmetallic Bumper

123100149
VG95092B32X23X7NBR65: RNCC: 2 | RNVC: 2
073446: RNCC: 3 | RNVC: 2
82200-B32X23X30X7X12.NBR65: RNCC: 3 | RNVC: 2
B32X23X30X7NBR65: RNCC: 5 | RNVC: 2

30 Mar 1987

5340-12-165-7171
Leather Strap

121657171
54-2510-110-03: RNCC: 3 | RNVC: 2

22 Jun 1976

5340-12-198-1432
Electrical-Mechanical Equipment Post

121981432
5801999-260000.01: RNCC: 2 | RNVC: 2
5801999-260000.01: RNCC: 3 | RNVC: 2
VG95148D14XM8X600-ST: RNCC: 5 | RNVC: 9

22 Dec 1983

5340-12-184-2365
Expansion Shield

121842365
4548426: RNCC: 3 | RNVC: 2
5801603-300000-005: RNCC: 5 | RNVC: 9
5801603-300000.005: RNCC: 5 | RNVC: 9

8 Jul 1980

5340-12-347-0267
Access Cover

123470267
5094972/3: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-12-370-7387
Mounting Bracket

123707387
2 0000-524: RNCC: 3 | RNVC: 2

14 Dec 2006

5340-12-158-4156
Leather Strap

121584156
1213-320-9: RNCC: 3 | RNVC: 2
1213-320-9: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-337-2003
Key Blank

123372003
984 L: RNCC: 3 | RNVC: 2
984L: RNCC: 5 | RNVC: 2

1 Feb 1995

5340-12-175-8015
Electrical-Mechanical Equipment Post

121758015
CF 418 951 A: RNCC: 2 | RNVC: 2
CF 418 951 A: RNCC: 3 | RNVC: 2
CF 418 951 A: RNCC: 5 | RNVC: 2
CF418951A: RNCC: 5 | RNVC: 2
CF418951A: RNCC: 5 | RNVC: 2
CF 418 951 A: RNCC: 5 | RNVC: 2
CF418951A: RNCC: 5 | RNVC: 2

18 Oct 1978

5340-12-341-6972
Mounting Plate

123416972
03.165.56.01.0: RNCC: 3 | RNVC: 2

16 Oct 1996

5340-12-305-5173
Spring Loaded Cylinder Fastener

123055173
8.011.291.000E: RNCC: 3 | RNVC: 2
8.011.291.000: RNCC: 5 | RNVC: 2

18 Nov 1985

5340-12-359-0721
Loop Clamp

123590721
0121 6736: RNCC: 3 | RNVC: 2
280.14.0323: RNCC: 5 | RNVC: 2

13 Dec 2002

5340-12-361-9882
Dust And Moisture Seal Protective Cap

123619882
63 6040 832 066: RNCC: 3 | RNVC: 2

12 Dec 2003

5340-12-365-6355
Double Angle Bracket

123656355
J92228317-403: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-341-0783
Manual Control Handle

123410783
68757-001: RNCC: 3 | RNVC: 2
015-3990-010: RNCC: 5 | RNVC: 2

25 Jul 1996

5340-12-343-8949
Casement Fastener

123438949
1000-U134/U136-1000-223: RNCC: 3 | RNVC: 2
3410.67221: RNCC: 5 | RNVC: 2
341067221: RNCC: 5 | RNVC: 2

12 Aug 1997

5340-12-199-5327
Butt Hinge

121995327
2300089-100104.10: RNCC: 2 | RNVC: 2
2300089-100104.10: RNCC: 3 | RNVC: 2
2300089-100104.10: RNCC: 5 | RNVC: 9
9844762: RNCC: 5 | RNVC: 9
2300089-100104-10: RNCC: 5 | RNVC: 9

9 May 1984

5340-12-184-9994
Angle Bracket

121849994
5801505-3112-001: RNCC: 3 | RNVC: 2
5801505-3112.001: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-12-192-2445
Electronic Equipment Hardware Kit

121922445
15 221 001: RNCC: 3 | RNVC: 2
15-221-001: RNCC: 5 | RNVC: 9
15-221-001-1141: RNCC: 5 | RNVC: 9

5 Apr 1982

5340-12-172-2341
Swivel Caster

121722341
3304-130-045-429: RNCC: 3 | RNVC: 2
02-804-50: RNCC: 5 | RNVC: 9
3304-130-045-429: RNCC: 5 | RNVC: 9
K8119: RNCC: 5 | RNVC: 9

3 Jan 1978

5340-12-141-8620
Nut And Bolt Locking Plate

121418620
NO PRIMARY REF 12-141-8620: RNCC: 3 | RNVC: 2
375-59-218-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-309-1423
Lock-Release Lever

123091423
5801339-0201.015: RNCC: 2 | RNVC: 2
5801339-0201.015: RNCC: 3 | RNVC: 2

17 Dec 1986

5340-12-702-2312
Blank Panel

127022312
VG95211-ML-127022312: RNCC: 2 | RNVC: 2
30.7701.131: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-392-7523
Snap Hook

123927523
09-001-001: RNCC: 3 | RNVC: 2

4 Jul 2013

5340-12-320-4721
Mending Plate

123204721
33019-004-015: RNCC: 3 | RNVC: 2
33019-04-15: RNCC: 5 | RNVC: 9

18 Jan 1990

5340-12-338-2578
Lock Key

123382578
161837219: RNCC: 3 | RNVC: 2
161 837 219: RNCC: 5 | RNVC: 2

12 Jun 1995

5340-12-169-1397
Expansion Plug

121691397
1387301400000: RNCC: 3 | RNVC: 2
3354110033: RNCC: 5 | RNVC: 2

18 Apr 1977

5340-12-345-9911
Angle Bracket

123459911
1203 4384: RNCC: 3 | RNVC: 2
12034384EE0111-90: RNCC: 5 | RNVC: 2
3.602.0.637.036.4: RNCC: 5 | RNVC: 9

27 May 1998

5340-12-701-1132
Mounting Plate

127011132
VG95211-ML-127011132: RNCC: 2 | RNVC: 2
4.15.9105.7111.98: RNCC: 3 | RNVC: 2
SKZ-9105-7111: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-365-0290
Loop Clamp

123650290
DIN3016-1-D1-23X15-W5-CR: RNCC: 2 | RNVC: 2

24 Nov 2004

5340-12-384-6890
Manual Control Handle

123846890
10187-001140.003.0: RNCC: 2 | RNVC: 2
10187-001140.003.0: RNCC: 3 | RNVC: 2

18 Mar 2011

5340-12-390-0608
Access Cover

123900608
4.006-351.0: RNCC: 3 | RNVC: 2

28 Sep 2012

5340-12-320-1022
Access Cover

123201022
C249-A15-C148: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-702-5812
Angle Bracket

127025812
VG95211-ML-127025812: RNCC: 2 | RNVC: 2
5.51.8605.0100.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-172-4794
Plain Solid Disk

121724794
601528: RNCC: 3 | RNVC: 2
4230-03-06-14-01: RNCC: 5 | RNVC: 2
4230-03-06-14-01: RNCC: 5 | RNVC: 9

23 Jan 1978

5340-12-702-1166
Angle Bracket

127021166
VG95211-ML-127021166: RNCC: 2 | RNVC: 2
30.5314.210: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-393-7547
Mounting Bracket

123937547
074886-0000-000: RNCC: 3 | RNVC: 2
4890-0112-03: RNCC: 5 | RNVC: 2
074886-0000-000: RNCC: 5 | RNVC: 2

9 Oct 2013

5340-12-366-7917
Catch Strike

123667917
504-183200.004: RNCC: 2 | RNVC: 2
504-183200.004: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-12-334-3937
Retaining Strap

123343937
272.933.218: RNCC: 3 | RNVC: 2
272.933218: RNCC: 5 | RNVC: 9
272.1329.21-04: RNCC: 5 | RNVC: 9
272.933 218: RNCC: 5 | RNVC: 9

3 May 1994

5340-12-702-0050
Loop Clamp

127020050
VG95211-ML-127020050: RNCC: 2 | RNVC: 2
1729S-52-15-T: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-163-9752
Electrical-Mechanical Equipment Post

121639752
VG95148C8XM4X55,5-ST: RNCC: 2 | RNVC: 2
HS5043-8-23: RNCC: 3 | RNVC: 2
VG95148C8XM4X55,5-ST: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-392-0001
Loop Clamp

123920001
DIN3016-1-D1-23X20-W5-CR: RNCC: 2 | RNVC: 2

24 Apr 2013

5340-12-189-3197
Dust And Moisture Seal Protective Plug

121893197
11.04525: RNCC: 3 | RNVC: 2
110452500: RNCC: 5 | RNVC: 2
11-04525-4-3: RNCC: 5 | RNVC: 2
11.04525 4.3: RNCC: 5 | RNVC: 2

17 Sep 1981

5340-12-189-0216
Lock-Release Lever

121890216
272.1329.123: RNCC: 3 | RNVC: 2
272-1329-123: RNCC: 5 | RNVC: 2
272.1329.123-00: RNCC: 5 | RNVC: 2
272-1329-123: RNCC: 5 | RNVC: 9
272.1329.123: RNCC: 5 | RNVC: 9
272.1329.123-00: RNCC: 5 | RNVC: 9

19 Aug 1981

5340-12-317-4622
Mending Plate

123174622
3787102EE3131-99: RNCC: 3 | RNVC: 2
151-132000-901-0: RNCC: 5 | RNVC: 2
151-132000-901-0: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-12-197-5808
Bridge Clamp

121975808
2562-13.1: RNCC: 3 | RNVC: 2
2562-13-1: RNCC: 5 | RNVC: 9
2562-13.1: RNCC: 5 | RNVC: 9

7 Nov 1983

5340-12-153-2860
Ball Socket Seat

121532860
040-0030-054-003: RNCC: 3 | RNVC: 2
0400030054003: RNCC: 5 | RNVC: 2
50061500: RNCC: 5 | RNVC: 2
09488222151: RNCC: 5 | RNVC: 2
09488222151: RNCC: 5 | RNVC: 9
9488222151: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-320-8299
Mending Plate

123208299
2300232-206260.002.0: RNCC: 2 | RNVC: 2
2300232-206260.002.0: RNCC: 3 | RNVC: 2
9997023-206260.002.0: RNCC: 5 | RNVC: 2
2300232-206260.002.02: RNCC: 5 | RNVC: 9

21 Feb 1990

5340-12-162-5982
Spring Tension Clip

121625982
F7-20-1-5-1: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-190-4193
Electrical-Mechanical Equipment Post

121904193
P-896150-017: RNCC: 3 | RNVC: 2
P896150-017: RNCC: 5 | RNVC: 2

25 Nov 1981

5340-12-320-5338
Loop Clamp

123205338
DIN3015-LA-K-3R-25-PA-W1: RNCC: 2 | RNVC: 2
DIN3015-LA-K-3R-25-PA6-W1: RNCC: 2 | RNVC: 2
SP325PA-DP-AS: RNCC: 3 | RNVC: 2
HRL3A25PA STMBL: RNCC: 3 | RNVC: 2
RANR3-325: RNCC: 3 | RNVC: 2
DIN3015-LA3R-25PA-W1-K: RNCC: 5 | RNVC: 2
RANR3-325: RNCC: 5 | RNVC: 2

23 Jan 1990

5340-12-161-1173
Loop Clamp

121611173
G14TAN15802-0: RNCC: 3 | RNVC: 2
G14TAN15802-3-1364-5: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-374-6992
Access Cover

123746992
SK976-061410.002.0: RNCC: 3 | RNVC: 2
7097341: RNCC: 5 | RNVC: 2
1726712: RNCC: 5 | RNVC: 9

7 Mar 2008

5340-12-308-9921
Angle Bracket

123089921
P-245251-764: RNCC: 3 | RNVC: 2
P245251-764: RNCC: 5 | RNVC: 2

4 Dec 1986

5340-12-371-4832
Angle Bracket

123714832
23302-188000.130: RNCC: 2 | RNVC: 2
23302-188000.130: RNCC: 3 | RNVC: 2
3017352: RNCC: 5 | RNVC: 2
4-3017-352: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-12-156-9273
Double Angle Bracket

121569273
23176-120000.18.0: RNCC: 2 | RNVC: 2
23176-120000-18-0: RNCC: 5 | RNVC: 2
23176-120000-18-0: RNCC: 5 | RNVC: 2
23176-120000.18.0: RNCC: 5 | RNVC: 2
23176-120000-18-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-6847
Mounting Plate

123186847
704-121123-903-0: RNCC: 3 | RNVC: 2

8 Aug 1989

5340-12-326-8183
Double Angle Bracket

123268183
30-92101-5091: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-12-307-5327
Pad Eye

123075327
309589006205: RNCC: 3 | RNVC: 2

27 Jun 1986

5340-12-367-4220
Mounting Plate

123674220
4339049: RNCC: 3 | RNVC: 2

16 Aug 2005

5340-12-348-6772
Multiple Angle Bracket

123486772
2300387-700860.004: RNCC: 2 | RNVC: 2
9911495: RNCC: 3 | RNVC: 2
2300387-700860.004: RNCC: 5 | RNVC: 9
9911495: RNCC: 5 | RNVC: 9

4 Aug 1999

5340-12-162-9495
Webbing Strap

121629495
T08545: RNCC: 3 | RNVC: 2
T08545: RNCC: 5 | RNVC: 9
T12905: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-324-7660
Butt Hinge

123247660
2500171-421000.03: RNCC: 2 | RNVC: 2
2500171-421000.03: RNCC: 3 | RNVC: 2

22 Mar 1991

5340-12-310-2888
Support Hook

123102888
1068889: RNCC: 2 | RNVC: 2
1068889: RNCC: 3 | RNVC: 2

5 May 1987

5340-12-315-3591
Angle Bracket

123153591
250222-3000.06: RNCC: 2 | RNVC: 2

15 Oct 1988

5340-12-365-1487
Helical Compression Spring Seat

123651487
1837-191300.004.0: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-381-1254
Spring Tension Clip

123811254
6.373-606.0: RNCC: 3 | RNVC: 2

13 Jan 2010

5340-12-135-6762
Butt Hinge

121356762
DIN7954-A80-ST-BK: RNCC: 2 | RNVC: 2
A80DIN7954: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-189-0855
Access Cover

121890855
009-078.941-003: RNCC: 3 | RNVC: 2
009-078-941-003: RNCC: 5 | RNVC: 2
009-078-941-003: RNCC: 5 | RNVC: 9
009-078.941-003: RNCC: 5 | RNVC: 9

26 Aug 1981

5340-12-328-9623
Clamping Catch

123289623
5800600-0147.000: RNCC: 2 | RNVC: 2
5800600-0147.000: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-184-8341
Angle Bracket

121848341
5801505-31182-001: RNCC: 3 | RNVC: 2
5801505-31182.001: RNCC: 5 | RNVC: 2

21 Aug 1980

5340-12-173-1562
Double Angle Bracket

121731562
SK1372: RNCC: 3 | RNVC: 2
42482083: RNCC: 5 | RNVC: 2
42482083EY5017-36: RNCC: 5 | RNVC: 2

22 Mar 1978

5340-12-329-1557
Retaining Strap

123291557
2300232-820000.006.0: RNCC: 2 | RNVC: 2
2300232-820000.006.0: RNCC: 3 | RNVC: 2

22 Jul 1992

5340-12-358-6970
Access Cover

123586970
2481-391820.006.0: RNCC: 2 | RNVC: 2
2481-391820.006.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-319-5035
Mending Plate

123195035
4900059-751960.002.0: RNCC: 2 | RNVC: 2
4900059-751960.002.0: RNCC: 3 | RNVC: 2
1509572: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-319-5556
Mounting Bracket

123195556
4900059-751797.001.0: RNCC: 3 | RNVC: 2
1227995: RNCC: 5 | RNVC: 2

11 Oct 1989

5340-12-368-9893
Multiple Angle Bracket

123689893
7803221197AA: RNCC: 3 | RNVC: 2
1030010-721140.000.0: RNCC: 5 | RNVC: 2

10 May 2006

5340-12-301-1958
Mending Plate

123011958
1423-911.26(4): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-181-5709
Lock-Release Lever

121815709
0231000001: RNCC: 3 | RNVC: 2
02310-00SCHWARZ: RNCC: 5 | RNVC: 2
02310.00-SCHWARZ: RNCC: 5 | RNVC: 2

3 Dec 1979

5340-12-361-4646
Retaining Clip

123614646
15031: RNCC: 3 | RNVC: 2
81614400016: RNCC: 3 | RNVC: 2
81.61440-0016: RNCC: 5 | RNVC: 2

6 Oct 2003

5340-12-156-8217
Electrical-Mechanical Equipment Post

121568217
VG95148B5,5XM3X25-AL: RNCC: 2 | RNVC: 2
VG95148B5,5XM3X25-AL: RNCC: 3 | RNVC: 2
MB0332277: RNCC: 3 | RNVC: 2
ZXD11021-25: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-372-5459
Stativteil

123725459
84150/6055-40: RNCC: 3 | RNVC: 2

26 Jul 2007

5340-12-131-3559
Access Cover

121313559
28.8228.0111: RNCC: 3 | RNVC: 9
28-8228-0111: RNCC: 5 | RNVC: 9
E28-8228-111: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-152-8960
Helical Compression Spring Seat

121528960
199036-455318.10: RNCC: 2 | RNVC: 2
199036-455318-10: RNCC: 5 | RNVC: 9
199036-455318.10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-161-3015
Nonmetallic Bumper

121613015
160-82079-02: RNCC: 3 | RNVC: 2
160-82079-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-7837
Shimmy Damper

123067837
8-19-200-1/150-300-500 WG-A: RNCC: 3 | RNVC: 2
8-19-200-1/150-300-500-WG-A: RNCC: 3 | RNVC: 2
19-200-1/150-300-500WG-A: RNCC: 5 | RNVC: 2
026168: RNCC: 5 | RNVC: 2
8-19-200-1/150N-300-500WG-A: RNCC: 5 | RNVC: 2
8-9-200-1/15-300-500 WG-A: RNCC: 5 | RNVC: 9

2 Apr 1986

5340-12-178-7127
Angle Bracket

121787127
2300109-050000.019.0: RNCC: 2 | RNVC: 2
2300109-050000-019-0: RNCC: 5 | RNVC: 2
2300109-050000.019.0: RNCC: 5 | RNVC: 2
2300109-050000-019-0: RNCC: 5 | RNVC: 9

14 May 1979

5340-12-700-6586
Retaining Strap

127006586
VG95211-ML-127006586: RNCC: 2 | RNVC: 2
088859430: RNCC: 3 | RNVC: 2
0502540082469: RNCC: 5 | RNVC: 2
88859430: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-339-8799
Support Hook

123398799
480-7397-23-11-00: RNCC: 3 | RNVC: 2
480/7397-23-11-00: RNCC: 5 | RNVC: 2

29 Jan 1996

5340-12-302-6298
Double Angle Bracket

123026298
5801101-21.019: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-194-3857
Double Angle Bracket

121943857
66.3851.180.04-A001: RNCC: 3 | RNVC: 2
170688: RNCC: 5 | RNVC: 2
66-3851-180-04A001: RNCC: 5 | RNVC: 2

28 Oct 1982

5340-12-195-5066
Handwheel

121955066
DIN390-B63-GTW: RNCC: 2 | RNVC: 2
B63DIN390-GTW: RNCC: 5 | RNVC: 2

7 Mar 1983

5340-12-162-7471
Loop Clamp

121627471
TS18: RNCC: 3 | RNVC: 2
0803753: RNCC: 5 | RNVC: 2
5800583-096190-111: RNCC: 5 | RNVC: 2
5800583-096190.111: RNCC: 5 | RNVC: 2
DZ0803753: RNCC: 5 | RNVC: 2
5N3821-021-12: RNCC: 5 | RNVC: 2
250870000013: RNCC: 5 | RNVC: 2
TS18: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-6905
Dust And Moisture Seal Protective Cap

121986905
529202-0000.000: RNCC: 3 | RNVC: 2
529202: RNCC: 5 | RNVC: 2

17 Feb 1984

5340-12-325-5842
Handle Grip

123255842
6208910073: RNCC: 3 | RNVC: 2

19 Jun 1991

5340-12-344-0626
Resilient Mount

123440626
1241 1792: RNCC: 3 | RNVC: 2
12411792ED0920-47: RNCC: 5 | RNVC: 2

4 Sep 1997

5340-12-315-5290
Mending Plate

123155290
5803471-201200.01: RNCC: 2 | RNVC: 2
65.7789.415.01-A001: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-12-131-5623
Turnbuckle

121315623
DIN82004-C1-VERZINKT: RNCC: 2 | RNVC: 2
DIN82004-C1-ZN: RNCC: 3 | RNVC: 2
6510018V: RNCC: 5 | RNVC: 2
C1DIN82004VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-384-9861
Webbing Strap

123849861
4100036-330318.000.0: RNCC: 2 | RNVC: 2
4100036-330318.000.0: RNCC: 3 | RNVC: 2

15 Apr 2011

5340-12-349-6467
Mounting Plate

123496467
U60.281000.18-00: RNCC: 3 | RNVC: 2

14 Dec 1999

5340-12-305-0511
Mending Plate

123050511
5801759-200000.003: RNCC: 2 | RNVC: 2
5801759-200000.003: RNCC: 3 | RNVC: 2
5801759-200000.003: RNCC: 5 | RNVC: 9

20 Sep 1985

5340-12-164-1292
Webbing Strap

121641292
100356-255020: RNCC: 2 | RNVC: 2
100356-255020: RNCC: 5 | RNVC: 2
100356-255020: RNCC: 5 | RNVC: 2
100356-255020: RNCC: 5 | RNVC: 9
82300-V110X20-NR-STZN-SW: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-312-4735
Access Cover

123124735
2300013-0100.01: RNCC: 2 | RNVC: 2
2300013-0100.01: RNCC: 3 | RNVC: 2
2300013-0100.01: RNCC: 5 | RNVC: 9

12 Jan 1988

5340-12-148-3203
Hand Crank

121483203
VG85087-A-125X11-GT: RNCC: 2 | RNVC: 2
VG85087-A-125X11-GT: RNCC: 3 | RNVC: 2
VG85087-A-125X11-GT: RNCC: 3 | RNVC: 2
VG85087-A-125X11-GT: RNCC: 3 | RNVC: 9
A125X11VG85087GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-6760
Access Door

123126760
42529/1021: RNCC: 3 | RNVC: 2

26 Jan 1988

5340-12-361-4933
Loop Clamp

123614933
1504298: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-171-0590
Retaining Clip

121710590
1000042-117000.12: RNCC: 3 | RNVC: 2
1000042-117000-12: RNCC: 5 | RNVC: 2

5 Sep 1977

5340-12-320-4402
Dust And Moisture Seal Protective Plug

123204402
620U2B: RNCC: 3 | RNVC: 2
9560163190: RNCC: 5 | RNVC: 2
650-977-302-0: RNCC: 5 | RNVC: 2
GPN620,U2B: RNCC: 5 | RNVC: 9

15 Jan 1990

5340-12-391-2530
Door Closer

123912530
101792: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-12-335-8194
Mending Plate

123358194
0852 2290: RNCC: 3 | RNVC: 2
8522290: RNCC: 5 | RNVC: 2
8522290FE9570-99: RNCC: 5 | RNVC: 2

19 Sep 1994

5340-12-350-7557
Double Angle Bracket

123507557
105-80052.65: RNCC: 3 | RNVC: 2

16 May 2000

5340-12-307-5119
Detent Plunger

123075119
4603210059: RNCC: 3 | RNVC: 2

25 Jun 1986

5340-12-362-8522
Access Cover

123628522
51-76809: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-12-357-9060
Casement Fastener

123579060
SZ2463.000: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-346-7534
Retaining Clip

123467534
8514.1025: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-149-1175
Mending Plate

121491175
521L02024: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-378-9963
Mechanic Equipment Hardware Kit

123789963
9888319302: RNCC: 3 | RNVC: 2
9888319302: RNCC: 5 | RNVC: 2
CV146169: RNCC: 5 | RNVC: 2

10 Jun 2009

5340-12-344-0415
Support Hook

123440415
2996.72.39: RNCC: 3 | RNVC: 2
2996.7239: RNCC: 5 | RNVC: 2

3 Sep 1997

5340-12-358-7178
Cushioning Pad

123587178
280.14.0249: RNCC: 3 | RNVC: 2

7 Nov 2002

Load More Results