What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 150 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 150 of 178

5340-12-170-6988
Door Handle

121706988
81626410001: RNCC: 3 | RNVC: 2
5000253172: RNCC: 5 | RNVC: 2
5000253172: RNCC: 5 | RNVC: 9

28 Jul 1977

5340-12-169-1692
Detent Plunger

121691692
CF446631: RNCC: 3 | RNVC: 2
CF 446 631: RNCC: 5 | RNVC: 2
CF446631: RNCC: 5 | RNVC: 2
CF 446 631: RNCC: 5 | RNVC: 2
CF446631: RNCC: 5 | RNVC: 2
CF 446 631: RNCC: 5 | RNVC: 2

20 Apr 1977

5340-12-043-2663

5340-12-197-7700
Angle Bracket

121977700
A-145401-071: RNCC: 3 | RNVC: 2
A145401-071: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-183-1345
Spring Tension Clip

121831345
2360-262220.02.0: RNCC: 2 | RNVC: 2
2360-262220.02.0: RNCC: 3 | RNVC: 2
2360-262220.02.0: RNCC: 5 | RNVC: 2
2360-262220-02-0: RNCC: 5 | RNVC: 2
2360-262220.02.0: RNCC: 5 | RNVC: 2
2360-262220-02-0: RNCC: 5 | RNVC: 9
2360-262220.02.0: RNCC: 5 | RNVC: 9
2360-262220.02.0: RNCC: 5 | RNVC: 9

20 Mar 1980

5340-12-338-0741
Plain Solid Disk

123380741
S-17045-1A-11: RNCC: 3 | RNVC: 2
S-16105-34: RNCC: 5 | RNVC: 2
S-17045-1APOS 11: RNCC: 5 | RNVC: 2
S17045-1A/11: RNCC: 5 | RNVC: 2

18 May 1995

5340-12-358-1635
Helical Compression Spring Retainer

123581635
4055R-310400.070.0: RNCC: 2 | RNVC: 2
4055R-310400.070.0: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-12-701-6372
Mounting Plate

127016372
VG95211-ML-127016372: RNCC: 2 | RNVC: 2
5.12.7070.1240.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-145-6182
Webbing Strap

121456182
23176-262134.00.0: RNCC: 2 | RNVC: 2
82300-23176-262134.00.0: RNCC: 3 | RNVC: 2
23176-262134-00-0: RNCC: 5 | RNVC: 2
23176-262134-00-0: RNCC: 5 | RNVC: 9
23176-262134.00.0: RNCC: 5 | RNVC: 9
82300-D300X20-NBR-ST-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-185-9344
Mounting Bracket

121859344
4900059-212069.000.0: RNCC: 3 | RNVC: 2
1285123: RNCC: 5 | RNVC: 2
4900059-212069-000-0: RNCC: 5 | RNVC: 2
4900059-212069.000.0: RNCC: 5 | RNVC: 9
212069-000-0: RNCC: 5 | RNVC: 9
4900059-212069-000-0: RNCC: 5 | RNVC: 9

11 Nov 1980

5340-12-330-7155
Spring Tension Clip

123307155
25035: RNCC: 3 | RNVC: 2
6.437-145.0: RNCC: 5 | RNVC: 2
6.437-145: RNCC: 5 | RNVC: 9

29 Jan 1993

5340-12-323-9986
Angle Bracket

123239986
702-192001-000-0: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-12-199-3857
Handwheel

121993857
25704-191336.00.0: RNCC: 2 | RNVC: 2
25704-191336.00.0: RNCC: 3 | RNVC: 2
25704-191336-00-0: RNCC: 5 | RNVC: 2
25704-191336-00-0: RNCC: 5 | RNVC: 9

19 Apr 1984

5340-12-124-0819
Snap Hook

121240819
DIN5299-A30ZN: RNCC: 2 | RNVC: 2
DIN5299-A30-ZN: RNCC: 3 | RNVC: 2
R5001 1/2-30 VERZINKT: RNCC: 3 | RNVC: 9
A30DIN5299VERZINKT: RNCC: 5 | RNVC: 2
A30DIN5299VZK: RNCC: 5 | RNVC: 2
5001 1/2-30 VERZINKT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-185-3587
Dust And Moisture Seal Protective Plug

121853587
1-1222-10-4: RNCC: 3 | RNVC: 2
086371: RNCC: 5 | RNVC: 2

30 Sep 1980

5340-12-193-9580
Handwheel

121939580
GN520.3-200-K20-D: RNCC: 3 | RNVC: 2
D3-200X20GN520.3: RNCC: 5 | RNVC: 2
D3-200X20GN520-3: RNCC: 5 | RNVC: 2
D3-200X20GN520.3: RNCC: 5 | RNVC: 2

20 Sep 1982

5340-12-311-5488
Angle Bracket

123115488
P-086471-417: RNCC: 3 | RNVC: 2
P086471-417: RNCC: 5 | RNVC: 2

16 Sep 1987

5340-12-352-4322
Hand Crank

123524322
S11013/25T-8-2-4.38: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-331-2955
Dust And Moisture Seal Protective Cap

123312955
1000118-2.5: RNCC: 2 | RNVC: 2
1000118-2.5: RNCC: 3 | RNVC: 2
1000118-2-5: RNCC: 5 | RNVC: 2

19 Apr 1993

5340-12-390-5258
Retaining Strap

123905258
82437406020: RNCC: 3 | RNVC: 2
82.43740-6020: RNCC: 5 | RNVC: 2

20 Nov 2012

5340-12-358-1179
Access Hole Frame

123581179
5801357-1800.28: RNCC: 2 | RNVC: 2
5801357-1800.28: RNCC: 3 | RNVC: 2

16 Sep 2002

5340-12-372-1665
Manual Control Lever

123721665
166140-0000: RNCC: 3 | RNVC: 2

22 Jun 2007

5340-12-199-6628
Angle Bracket

121996628
238658-0364: RNCC: 3 | RNVC: 2
238658-0364: RNCC: 5 | RNVC: 9

19 May 1984

5340-12-326-6114
Webbing Strap

123266114
TL8305-0281-116-20X2X145MM-6031: RNCC: 2 | RNVC: 2
TL8305-0281-116-RAL 6031: RNCC: 3 | RNVC: 2
TL8305-0282-116-RAL 6031: RNCC: 5 | RNVC: 2
TL8305-0282-116-20X2X145MM-6031: RNCC: 5 | RNVC: 2

15 Oct 1991

5340-12-197-9541
Webbing Strap

121979541
2500035-105000.07: RNCC: 2 | RNVC: 2
2500035-105000.07: RNCC: 3 | RNVC: 2
2500035-105000.07: RNCC: 5 | RNVC: 9
000-E4-25X2,5X530-PE-RAL6031: RNCC: 6 | RNVC: 9

5 Dec 1983

5340-12-314-4547
Turnbuckle Body

123144547
1040-12-00-003-05: RNCC: 3 | RNVC: 2
1040-12-00-003-05: RNCC: 5 | RNVC: 9

8 Jul 1988

5340-12-185-8043
Retaining Strap

121858043
278-971: RNCC: 3 | RNVC: 2
553161777: RNCC: 5 | RNVC: 2
1011-2400-5001: RNCC: 5 | RNVC: 2
785535: RNCC: 5 | RNVC: 2

1 Nov 1980

5340-12-358-3151
Mending Plate

123583151
2500262-192300.001.0: RNCC: 2 | RNVC: 2
2500262-192300.001.0: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-12-312-7816
Double Angle Bracket

123127816
P-296814-431: RNCC: 3 | RNVC: 2
P296814-431: RNCC: 5 | RNVC: 2

4 Feb 1988

5340-12-702-5381
Angle Bracket

127025381
VG95211-ML-127025381: RNCC: 2 | RNVC: 2
5.51.7204.1270.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-349-7437
Angle Bracket

123497437
T290M2202271: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-349-2699
Angle Bracket

123492699
T524M1513216: RNCC: 3 | RNVC: 2

19 Oct 1999

5340-12-341-6517
Nonmetallic Bumper

123416517
03506300: RNCC: 3 | RNVC: 2
03506300.274: RNCC: 5 | RNVC: 2

10 Oct 1996

5340-12-182-3230
Retaining Strap

121823230
602010107600: RNCC: 3 | RNVC: 2

25 Jan 1980

5340-12-348-6708
Spring Loaded Cylinder Fastener

123486708
1720501: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-314-4098
Helical Compression Spring Retainer

123144098
00448074: RNCC: 3 | RNVC: 2
00448074: RNCC: 5 | RNVC: 2

2 Jul 1988

5340-12-348-6624
Mounting Bracket

123486624
4647201: RNCC: 2 | RNVC: 2
4647201: RNCC: 3 | RNVC: 2

2 Aug 1999

5340-12-301-5765
Angle Bracket

123015765
4199092: RNCC: 3 | RNVC: 2
S12B.E01.04.00.007: RNCC: 5 | RNVC: 2

25 Oct 1984

5340-12-377-0280
Buckle

123770280
10026851: RNCC: 3 | RNVC: 2

8 Dec 2008

5340-12-369-4040
Bow Handle

123694040
80101170: RNCC: 3 | RNVC: 2

29 Jun 2006

5340-12-368-8689
Halter

123688689
2045-252350B00C: RNCC: 3 | RNVC: 2

3 May 2006

5340-12-331-9307
Mending Plate

123319307
2300264-202000.04.0: RNCC: 3 | RNVC: 2

7 Jul 1993

5340-12-179-8212
Helical Compression Spring Seat

121798212
103-250-0091-000: RNCC: 3 | RNVC: 2
351-002-623153-000-0: RNCC: 5 | RNVC: 9

3 Aug 1979

5340-12-381-1257
Clamping Catch

123811257
6.375-176.0: RNCC: 3 | RNVC: 2

13 Jan 2010

5340-12-387-3925
Manual Control Handle

123873925
GN563.1-40-M6-20: RNCC: 3 | RNVC: 2

8 Dec 2011

5340-12-701-3270
Threaded End Tensioning Tie Rod

127013270
VG95211-ML-127013270: RNCC: 2 | RNVC: 2
5.12.5102.0080.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-303-5302
Resilient Mount

123035302
DIN95363-D25X22-M6X6-M6X9-NR55S: RNCC: 2 | RNVC: 2
C40165A373C39: RNCC: 5 | RNVC: 2
505000-25X22-M6X6-M6X9.NR55.ST: RNCC: 5 | RNVC: 2
VG95363-D25X22-M6X6-M6X9-NR55ST: RNCC: 5 | RNVC: 9

2 Apr 1985

5340-12-197-5166
Mending Plate

121975166
531909-0041: RNCC: 3 | RNVC: 2
531909-0041: RNCC: 5 | RNVC: 9
531909-0041.000: RNCC: 5 | RNVC: 9

27 Oct 1983

5340-12-340-2759
Resilient Mount

123402759
DIN95363-A30X20-NR70ST: RNCC: 2 | RNVC: 2
500031-M8X20.NR70.ST: RNCC: 5 | RNVC: 2
81100-30X20-M8X20.NR70.ST: RNCC: 5 | RNVC: 2
781071 70 SHOREA: RNCC: 5 | RNVC: 2
781071HART: RNCC: 5 | RNVC: 2
512 858: RNCC: 5 | RNVC: 2
512858: RNCC: 5 | RNVC: 2
512858: RNCC: 5 | RNVC: 2
VG95363-A30X20-NR70ST: RNCC: 5 | RNVC: 9

20 Mar 1996

5340-12-346-4848
Loop Clamp

123464848
SPGU6011-124/30 SK: RNCC: 3 | RNVC: 2
181 6011 124: RNCC: 5 | RNVC: 2

30 Jul 1998

5340-12-384-2168
Mounting Plate

123842168
112156301: RNCC: 3 | RNVC: 2
112156301: RNCC: 5 | RNVC: 2
82.28100-0001: RNCC: 5 | RNVC: 2
82281000001: RNCC: 5 | RNVC: 2

3 Feb 2011

5340-12-314-0316
Handle Grip

123140316
294.1: RNCC: 3 | RNVC: 2

31 May 1988

5340-12-313-6813
Access Cover

123136813
5.035.213.0: RNCC: 3 | RNVC: 2

26 Apr 1988

5340-12-366-4961
Mounting Bracket

123664961
2 0066-830: RNCC: 3 | RNVC: 2
2 0066-830: RNCC: 5 | RNVC: 2

29 Apr 2005

5340-12-300-8722
Spring Loaded Cylinder Fastener

123008722
1423-948.33(4): RNCC: 3 | RNVC: 2

6 Sep 1984

5340-12-319-8337
Rod End Connector

123198337
E 12954-4: RNCC: 3 | RNVC: 2
12954-4: RNCC: 5 | RNVC: 2

9 Nov 1989

5340-12-300-2040
Angle Bracket

123002040
CF 445 733 -E: RNCC: 3 | RNVC: 2
CF 445 733 -E: RNCC: 5 | RNVC: 2

14 Jul 1984

5340-12-349-8335
Lock Key

123498335
51 25 2 313 298: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-12-333-8710
Quick Release Plunger

123338710
405-3: RNCC: 3 | RNVC: 2

18 Feb 1994

5340-12-347-5798
Hasp Staple

123475798
8882815338: RNCC: 3 | RNVC: 2
88.8281.5338: RNCC: 5 | RNVC: 2

11 Jan 1999

5340-12-342-6175
Casement Fastener

123426175
U100-3414-002: RNCC: 2 | RNVC: 2
U100-3414-002: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-307-5125
Mending Plate

123075125
4606370014: RNCC: 3 | RNVC: 2
8522-81: RNCC: 5 | RNVC: 2

25 Jun 1986

5340-12-147-6193
Turnbuckle Body

121476193
0199-27-191-08: RNCC: 3 | RNVC: 2
3380844EE0199-27: RNCC: 5 | RNVC: 2
0338 0844: RNCC: 5 | RNVC: 2
3380844: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-303-2212
Double Angle Bracket

123032212
4900189-152000.00: RNCC: 2 | RNVC: 2
4900189-152000.00: RNCC: 3 | RNVC: 2
4900189-152000.00: RNCC: 3 | RNVC: 2
4900189-152000.00: RNCC: 3 | RNVC: 2
4900189-152000.00: RNCC: 5 | RNVC: 9

7 Mar 1985

5340-12-187-3570
Electrical-Mechanical Equipment Post

121873570
VG95148B5,5XM3X36-AL: RNCC: 2 | RNVC: 2
VG95148B5,5XM3X36-AL: RNCC: 3 | RNVC: 2
475.8148: RNCC: 3 | RNVC: 2
4758148: RNCC: 5 | RNVC: 9

2 Apr 1981

5340-12-701-9635
Mending Plate

127019635
VG95211-ML-127019635: RNCC: 2 | RNVC: 2
01.0252.3624: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-308-5995
Extension Drawer Slide Section

123085995
C249-A40-B11: RNCC: 2 | RNVC: 2
C249-A40-B11: RNCC: 3 | RNVC: 2

28 Oct 1986

5340-12-381-9320
Clamping Catch

123819320
5371-151321D00K: RNCC: 3 | RNVC: 2

19 Apr 2010

5340-12-371-7013
Handle Grip

123717013
MEL300-D1-005: RNCC: 3 | RNVC: 2

7 May 2007

5340-12-358-9380
Spring Tension Clip

123589380
J04020000-075: RNCC: 3 | RNVC: 2

2 Dec 2002

5340-12-393-0874
Pipe Hanger

123930874
160-72086-01: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-12-340-1920
Access Cover

123401920
C79451-A3182-C32: RNCC: 3 | RNVC: 2

13 Mar 1996

5340-12-191-1120
Retaining Strap

121911120
42013188: RNCC: 3 | RNVC: 2
42013188EE5052-81: RNCC: 5 | RNVC: 2

13 Jan 1982

5340-12-199-7230
Angle Bracket

121997230
5010010806: RNCC: 3 | RNVC: 2

25 May 1984

5340-12-364-8263
Angle Bracket

123648263
S932M1021215: RNCC: 3 | RNVC: 2

5 Nov 2004

5340-12-357-8154
Angle Bracket

123578154
2300042-255503.002: RNCC: 2 | RNVC: 2
9940410: RNCC: 3 | RNVC: 2
2300042-255503.002: RNCC: 5 | RNVC: 2

29 Jul 2002

5340-12-348-2505
Access Door Hinge

123482505
287.41.951: RNCC: 3 | RNVC: 2

17 May 1999

5340-12-315-2526
Dust And Moisture Seal Protective Plug

123152526
381997286: RNCC: 3 | RNVC: 2
381 997 28 86: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-043-3393

5340-12-343-3989
Webbing Strap

123433989
2300002-151000.115: RNCC: 2 | RNVC: 2
2300002-151000.115: RNCC: 3 | RNVC: 2
2300002-151000.115: RNCC: 5 | RNVC: 2
2300002-151000.115: RNCC: 5 | RNVC: 9

16 Jun 1997

5340-12-188-9461
Dust And Moisture Seal Protective Cap

121889461
2500075-194240.001.0: RNCC: 2 | RNVC: 2
2500075-194240.001.0: RNCC: 3 | RNVC: 2
2500075-194240.001.0: RNCC: 3 | RNVC: 2
2500075-194240-001-0: RNCC: 5 | RNVC: 2
2500075-194240-001-0: RNCC: 5 | RNVC: 9
2500075-194240.001.0: RNCC: 5 | RNVC: 9

11 Aug 1981

5340-12-156-4682
Retaining Strap

121564682
DIN72571-1X8-ST: RNCC: 2 | RNVC: 2
DIN72571-1X8-ST: RNCC: 3 | RNVC: 2
1425912: RNCC: 5 | RNVC: 2
3381-003: RNCC: 5 | RNVC: 2
1X8DIN72571ST: RNCC: 5 | RNVC: 2
1X8DIN72571STR0H: RNCC: 5 | RNVC: 2
0592 8: RNCC: 5 | RNVC: 2
153-1835: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-9530
Angle Bracket

121969530
A-295067-401: RNCC: 3 | RNVC: 2
A295067-401: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-381-8201
Loop Clamp

123818201
RSGU-1.25/20-W5: RNCC: 3 | RNVC: 2

7 Apr 2010

5340-12-392-4842
Pipe Hanger

123924842
2500310-250020.000.0: RNCC: 2 | RNVC: 2
2500310-250020.000.0: RNCC: 3 | RNVC: 2

12 Jun 2013

5340-12-406-4545
Angle Bracket

5340-12-186-9311
Halter

121869311
431271222670: RNCC: 3 | RNVC: 2
43127122267: RNCC: 5 | RNVC: 2
5801796-120000.11: RNCC: 5 | RNVC: 9
5801796-120000-11: RNCC: 5 | RNVC: 9

20 Feb 1981

5340-12-322-9798
Lock-Release Lever

123229798
198 7107 00: RNCC: 3 | RNVC: 2
PH80-9: RNCC: 5 | RNVC: 2
198710700: RNCC: 5 | RNVC: 2

15 Oct 1990

5340-12-702-1674
Mounting Bracket

127021674
VG95211-ML-127021674: RNCC: 2 | RNVC: 2
30.7100.2231: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-322-5758
Bow Handle

123225758
VG95149A150X30-M4-NRST-PASSIVIER: RNCC: 2 | RNVC: 2
VA10.150X40XM4.31.PASSIVIERT: RNCC: 3 | RNVC: 2
MEM3-1030P3: RNCC: 5 | RNVC: 2

3 Sep 1990

5340-12-384-4031
Roller Holder

123844031
F1.1189-30-10-10.00-42: RNCC: 3 | RNVC: 2

22 Feb 2011

5340-12-179-2897
Angle Bracket

121792897
5800828-14732: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-701-9681
Retaining Strap

127019681
VG95211-ML-127019681: RNCC: 2 | RNVC: 2
01.7220.6430: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-371-6586
Spacing Threaded Standoff

123716586
2321234000: RNCC: 3 | RNVC: 2

3 May 2007

5340-12-317-5361
Lock-Release Lever

123175361
4/0925/7018/1: RNCC: 3 | RNVC: 2

17 Apr 1989

5340-12-371-3677
Helical Compression Spring Seat

123713677
R900113136: RNCC: 3 | RNVC: 2
113136: RNCC: 5 | RNVC: 2

21 Mar 2007

5340-12-152-0483
Resilient Mount

121520483
8382231212: RNCC: 2 | RNVC: 2
8382231212: RNCC: 3 | RNVC: 2
8382231212: RNCC: 3 | RNVC: 2
8382231212: RNCC: 3 | RNVC: 2
600203: RNCC: 5 | RNVC: 2
8382231212: RNCC: 5 | RNVC: 2
121520483: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-145-3877

5340-12-327-7647
Access Cover

123277647
9862411: RNCC: 3 | RNVC: 9

26 Feb 1992

5340-12-126-6268
Retaining Strap

121266268
2210045: RNCC: 3 | RNVC: 2
3028: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-313-7461
Access Cover

123137461
409061772: RNCC: 3 | RNVC: 2
409.061 772: RNCC: 5 | RNVC: 2
5808.2007: RNCC: 5 | RNVC: 2

30 Apr 1988

5340-12-384-4115
Bow Handle

123844115
S533M9020101: RNCC: 3 | RNVC: 2

22 Feb 2011

5340-12-387-5914
Tie Down Adapter

123875914
5803746-203380.00: RNCC: 2 | RNVC: 2
7802903380: RNCC: 3 | RNVC: 2

12 Jan 2012

5340-12-165-0433
Nonmetallic Bumper

121650433
7998295: RNCC: 3 | RNVC: 2
6013-400-020-6: RNCC: 5 | RNVC: 2
E650.002.100.036: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-390-2158
Loop Clamp

123902158
DIN3016-1-D1-23X15-W1-2-NBR: RNCC: 2 | RNVC: 2

17 Oct 2012

5340-12-345-6750
Manual Control Handle

123456750
06460-4121X60: RNCC: 3 | RNVC: 2
NLM6460-4121X60: RNCC: 5 | RNVC: 9

14 Apr 1998

5340-12-701-6359
Mounting Plate

127016359
VG95211-ML-127016359: RNCC: 2 | RNVC: 2
5.12.7070.1110.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-192-8964
Angle Bracket

121928964
4617200023: RNCC: 3 | RNVC: 2
721 1 67 018 2: RNCC: 5 | RNVC: 9

3 Jun 1982

5340-12-186-2692
Double Angle Bracket

121862692
2500034-352300-04-0: RNCC: 3 | RNVC: 2
2500034-352300-04-0: RNCC: 5 | RNVC: 9
2500034-352300.04.0: RNCC: 5 | RNVC: 9

11 Dec 1980

5340-12-358-3163
Retaining Bail

123583163
2500261-068220.000.0: RNCC: 2 | RNVC: 2
2500261-068220.000.0: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-12-701-5821
Retaining Strap

127015821
VG95211-ML-127015821: RNCC: 2 | RNVC: 2
5.12.6409.1500.61: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-331-9747
Webbing Strap

123319747
01802-2-SCHLAUFE-FE500-LE1000: RNCC: 3 | RNVC: 2
01802-2-FE500MM-LE1000MM: RNCC: 5 | RNVC: 2
79036/SCHLAUFE-1500-500: RNCC: 5 | RNVC: 2
01802-2-FE500-LE1000: RNCC: 5 | RNVC: 2
01802-2-FE=500-LE=1000: RNCC: 5 | RNVC: 2
01802-2-SCHLAUFE-FE500-LE1000MM: RNCC: 5 | RNVC: 2
DIN60060-2-25X500X1000-C1/SCHLAU: RNCC: 5 | RNVC: 9

12 Jul 1993

5340-12-186-5072
Resilient Mount

121865072
DIN95363-A15X30-M4X4,5M4X10NR55: RNCC: 2 | RNVC: 2
500018-M4X4,5-M4X10.NR55.ST: RNCC: 5 | RNVC: 2
55-0206-001-03: RNCC: 5 | RNVC: 2
VG95363-A15X30-M4X4,5M4X10NR55ST: RNCC: 5 | RNVC: 9

12 Jan 1981

5340-12-196-9032
Angle Bracket

121969032
A-295085-403: RNCC: 3 | RNVC: 2
A295085-403: RNCC: 5 | RNVC: 2

30 Aug 1983

5340-12-197-4091
Electrical-Mechanical Equipment Post

121974091
V22.918.340000-01: RNCC: 3 | RNVC: 2
V22-918-340000-01: RNCC: 5 | RNVC: 2

19 Oct 1983

5340-12-702-4219
Angle Bracket

127024219
VG95211-ML-127024219: RNCC: 2 | RNVC: 2
5.12.7205.1007.92: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-329-7928
Handle Grip

123297928
147 997: RNCC: 3 | RNVC: 2
117-090.0014.4: RNCC: 5 | RNVC: 2

29 Sep 1992

5340-12-308-0974
Electrical-Mechanical Equipment Post

123080974
KMS013-212000.004.0: RNCC: 3 | RNVC: 2

2 Sep 1986

5340-12-702-4224
Mounting Plate

127024224
VG95211-ML-127024224: RNCC: 2 | RNVC: 2
5.12.7205.8011.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6400
Angle Bracket

127016400
VG95211-ML-127016400: RNCC: 2 | RNVC: 2
5.12.7080.1400.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-197-8191
Mending Plate

121978191
1218 7969: RNCC: 3 | RNVC: 2
12187969: RNCC: 5 | RNVC: 9
6-226-0-637-064-5: RNCC: 5 | RNVC: 9
6.226.0.637.064.5: RNCC: 5 | RNVC: 9

24 Nov 1983

5340-12-378-1680
Dust And Moisture Seal Protective Plug

123781680
GPN700/11/16-12UN: RNCC: 3 | RNVC: 2
700/11/16-12UN: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-12-193-9453
Loop Clamp

121939453
3609951001: RNCC: 3 | RNVC: 2

16 Sep 1982

5340-12-376-7772
Stand Base

123767772
522H22701/1: RNCC: 3 | RNVC: 2

6 Nov 2008

5340-12-182-9761
Angle Bracket

121829761
7800121314: RNCC: 3 | RNVC: 2
5801525-13100-04: RNCC: 5 | RNVC: 9
5801525-13100.04: RNCC: 5 | RNVC: 9
78001 21314: RNCC: 5 | RNVC: 9

11 Mar 1980

5340-12-333-6765
Double Angle Bracket

123336765
45485-25: RNCC: 3 | RNVC: 2
BW208351: RNCC: 5 | RNVC: 2
2083513: RNCC: 5 | RNVC: 2
BW208351: RNCC: 5 | RNVC: 2
FS45485-25: RNCC: 5 | RNVC: 2

21 Jan 1994

5340-12-339-7262
Dust And Moisture Seal Protective Cap

123397262
SIZ890-FLF1-9P58-KAPPE: RNCC: 3 | RNVC: 2
SIZ 890-FLF1-9P58-KAPPE: RNCC: 5 | RNVC: 2

4 Jan 1996

5340-12-349-1735
Access Cover

123491735
320315-02: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-12-025-8072

5340-12-365-5880
Angle Bracket

123655880
J32320052-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-701-8871
Retaining Band

127018871
VG95211-ML-127018871: RNCC: 2 | RNVC: 2
9G6.482.026: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-167-0335
Helical Compression Spring Seat

121670335
13306003: RNCC: 3 | RNVC: 2
1267324EE8751-12: RNCC: 5 | RNVC: 2
0126 7324: RNCC: 5 | RNVC: 2
8751-12-03-11: RNCC: 5 | RNVC: 2
1267324: RNCC: 5 | RNVC: 9

11 Nov 1976

5340-12-369-5393
Spacing Threaded Standoff

123695393
AM315/5,5: RNCC: 3 | RNVC: 2
14.998.034: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-12-193-3389
Double Angle Bracket

121933389
4404327: RNCC: 3 | RNVC: 2
4.456715: RNCC: 5 | RNVC: 2

13 Jul 1982

5340-12-360-1021
Support Hook

123601021
1868-251000.001.0: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-322-2951
Webbing Strap

123222951
5802298-212200.00: RNCC: 2 | RNVC: 2
5802298-212200.00: RNCC: 3 | RNVC: 2
000-A2-25X2,0X1300-PE-RAL6031: RNCC: 6 | RNVC: 9

9 Aug 1990

5340-12-392-0770
Dust And Moisture Seal Protective Cap-Plug

123920770
SPF09.1422/BR: RNCC: 3 | RNVC: 2

2 May 2013

5340-12-194-1070
Permanent Magnet

121941070
12728-1130: RNCC: 2 | RNVC: 2
12728-1130: RNCC: 3 | RNVC: 2
12728-1130: RNCC: 5 | RNVC: 9

4 Oct 1982

5340-12-385-2464
Bow Handle

123852464
F1.1189-40-10-10.30-00: RNCC: 3 | RNVC: 2

12 May 2011

5340-12-702-0226
Loop Clamp

127020226
VG95211-ML-127020226: RNCC: 2 | RNVC: 2
200N402-70: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-394-4397
Mounting Bracket

123944397
F1.4353-50-05-00.00-01: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-12-148-6247
Door Handle

121486247
VG75111-C70: RNCC: 2 | RNVC: 2
C70VDA75111: RNCC: 5 | RNVC: 2
C70VG75111: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-194-3846
Nut And Bolt Locking Plate

121943846
37979-01: RNCC: 3 | RNVC: 2

28 Oct 1982

5340-12-335-3602
Mending Plate

123353602
6700018-201800.05: RNCC: 2 | RNVC: 2
6700018-201800.05: RNCC: 3 | RNVC: 2

12 Aug 1994

5340-12-392-4160
Pipe Hanger

123924160
I007232: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-12-343-5670
Retaining Strap

123435670
50031001080: RNCC: 3 | RNVC: 2
F300 0T 022 4071: RNCC: 6 | RNVC: 9

3 Jul 1997

5340-12-338-0272
Metallic Bumper

123380272
9192366: RNCC: 3 | RNVC: 2
308 6040 02 000: RNCC: 5 | RNVC: 2

12 May 1995

5340-12-315-6168
Lock-Release Lever

123156168
4900153-30610-00-15: RNCC: 3 | RNVC: 2
4900153-30610.15: RNCC: 5 | RNVC: 9
4900153-30610.15: RNCC: 5 | RNVC: 9

12 Nov 1988

5340-12-330-8900
Mending Plate

123308900
105-071-550-5: RNCC: 3 | RNVC: 2

19 Feb 1993

5340-12-701-7925
Mounting Plate

127017925
VG95211-ML-127017925: RNCC: 2 | RNVC: 2
5.12.7904.8041.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-333-8828
Double Angle Bracket

123338828
404-5-25: RNCC: 3 | RNVC: 2
404-5.25: RNCC: 5 | RNVC: 2

21 Feb 1994

5340-12-303-5831
Pipe Bracket

123035831
P-616783-011: RNCC: 3 | RNVC: 2
P616783-011: RNCC: 5 | RNVC: 2

10 Apr 1985

5340-12-354-7404
Dust And Moisture Seal Protective Cover

123547404
315070 018: RNCC: 3 | RNVC: 2
6.368-048.0: RNCC: 5 | RNVC: 2

21 Aug 2001

5340-12-025-1519

5340-12-178-6123
Door Button

121786123
CF316043AU: RNCC: 3 | RNVC: 2
CF 316 043 -U: RNCC: 5 | RNVC: 2
CF 316 043 AU: RNCC: 5 | RNVC: 2
CF 316 043 AU: RNCC: 5 | RNVC: 2
CF3160430U: RNCC: 5 | RNVC: 2
CF316043AU: RNCC: 5 | RNVC: 2
CF 316 043 -U: RNCC: 5 | RNVC: 2
CF3160430U: RNCC: 5 | RNVC: 2

3 May 1979

5340-12-350-1101
Loop Clamp

123501101
211-15160: RNCC: 3 | RNVC: 2
16C: RNCC: 5 | RNVC: 2

16 Feb 2000

5340-12-393-7679
Access Cover

123937679
11.31011-0033: RNCC: 3 | RNVC: 2
11.31011-0033: RNCC: 5 | RNVC: 2

9 Oct 2013

5340-12-317-7759
Mounting Plate

123177759
3/0421/7506/2: RNCC: 3 | RNVC: 2

11 May 1989

5340-12-308-8352
Double Angle Bracket

123088352
1281-51000.14: RNCC: 2 | RNVC: 2
160274: RNCC: 3 | RNVC: 2
1281-51000.14: RNCC: 5 | RNVC: 2

21 Nov 1986

5340-12-368-9905
Angle Bracket

123689905
7803221106AA: RNCC: 3 | RNVC: 2
1030010-721000.006.0: RNCC: 5 | RNVC: 2

10 May 2006

5340-12-181-1532
Dust And Moisture Seal Protective Plug

121811532
60199.3: RNCC: 3 | RNVC: 2
435589016310: RNCC: 5 | RNVC: 2
60199-3: RNCC: 5 | RNVC: 9

29 Oct 1979

5340-12-180-6878
Spring Window Bolt

121806878
3817250279: RNCC: 3 | RNVC: 2

26 Sep 1979

5340-12-374-5740
Tee Hinge

123745740
453 6129-801: RNCC: 3 | RNVC: 2
453 6129-801: RNCC: 5 | RNVC: 2

27 Feb 2008

5340-12-348-8698
Mounting Bracket

123488698
4256202614: RNCC: 3 | RNVC: 2

30 Aug 1999

5340-12-091-0482

5340-12-182-5775
Expansion Shield

121825775
12672PA122S: RNCC: 3 | RNVC: 2
3550015: RNCC: 3 | RNVC: 2

12 Feb 1980

5340-12-367-0136
Hook Handle

123670136
5340LLTRT1483: RNCC: 3 | RNVC: 2

29 Jun 2005

5340-12-307-4319
Retaining Strap

123074319
1090-8295T: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-12-367-8456
Angle Bracket

123678456
2300421-251400.008: RNCC: 2 | RNVC: 2
2300421-251400.008: RNCC: 3 | RNVC: 2

24 Oct 2005

5340-12-321-9408
Metal Runner

123219408
702-141600-952-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-310-8350
Double Angle Bracket

123108350
326-51-1401-03: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-12-329-3774
Electrical-Mechanical Equipment Post

123293774
VG95148B5XM2,5X17-NRST: RNCC: 2 | RNVC: 2
C22107-A219-C78: RNCC: 3 | RNVC: 2
35632833: RNCC: 3 | RNVC: 2

14 Aug 1992

5340-12-701-1124
Mounting Plate

127011124
VG95211-ML-127011124: RNCC: 2 | RNVC: 2
4.15.9101.7804.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-348-4507
Helical Compression Spring Retainer

123484507
519-120106.02.0: RNCC: 2 | RNVC: 2
519-120106.02.0: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-12-311-0807
Handle Grip

123110807
1361046-17006-01: RNCC: 3 | RNVC: 2

23 Jul 1987

5340-12-303-8063
Support Hook

123038063
6600117-621200.00: RNCC: 2 | RNVC: 2
6600117-621200.00: RNCC: 5 | RNVC: 9

6 May 1985

5340-12-331-3117
Retaining Strap

123313117
704-180131-951-0: RNCC: 3 | RNVC: 2

21 Apr 1993

5340-12-342-5665
Mounting Bracket

123425665
2094-424010.000.0: RNCC: 2 | RNVC: 2
2094-424010.000.0: RNCC: 3 | RNVC: 2

27 Feb 1997

5340-12-303-9180
Angle Bracket

123039180
CF 449 936 B: RNCC: 3 | RNVC: 2
CF 449 936 B: RNCC: 5 | RNVC: 2

21 May 1985

5340-12-191-0680
Permanent Magnet

121910680
8065-4: RNCC: 3 | RNVC: 2
380500741: RNCC: 5 | RNVC: 2

11 Jan 1982

5340-12-338-1228
Mounting Plate

123381228
230-273.03: RNCC: 3 | RNVC: 2
PK-HH-37B: RNCC: 5 | RNVC: 9

26 May 1995

5340-12-393-1596
Access Cover

123931596
11.07051-0104: RNCC: 3 | RNVC: 2
11.07051-0104: RNCC: 5 | RNVC: 2

14 Aug 2013

5340-12-300-4736
Electrical-Mechanical Equipment Post

123004736
VG95148B5XM3X15-NRST: RNCC: 2 | RNVC: 2
VG95148B5XM3X15-NRST: RNCC: 3 | RNVC: 2
67.3521.000.40-A001: RNCC: 3 | RNVC: 2
205874: RNCC: 5 | RNVC: 2

4 Aug 1984

5340-12-323-5073
Pad Eye

123235073
1270177: RNCC: 3 | RNVC: 2
4300.65.00/22: RNCC: 5 | RNVC: 2
4300.065.00.00.022: RNCC: 5 | RNVC: 2
1270177: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-702-1850
Mounting Plate

127021850
VG95211-ML-127021850: RNCC: 2 | RNVC: 2
30.7206.20: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-315-5298
Access Cover

123155298
5803471-201312.01: RNCC: 2 | RNVC: 2
65.7789.423.01-A001: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-12-197-7450
Metal Runner

121977450
6600118-139200.00: RNCC: 3 | RNVC: 2
6600118-139200.00: RNCC: 5 | RNVC: 9

21 Nov 1983

5340-12-388-3934
Mounting Bracket

123883934
1.46.204.4039.2: RNCC: 3 | RNVC: 2

16 Mar 2012

5340-12-392-2123
Mechanical Stop

123922123
DW 306 582 C: RNCC: 3 | RNVC: 2
DW 306 582 C: RNCC: 5 | RNVC: 2

16 May 2013

5340-12-308-2136
Angle Bracket

123082136
3.418.9.982.004.4: RNCC: 3 | RNVC: 2
3.418.9.982.004.4: RNCC: 5 | RNVC: 9

15 Sep 1986

5340-12-363-5100
Door Holder

123635100
71153: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-379-8796
Angle Bracket

123798796
17110203: RNCC: 3 | RNVC: 2
CV169027: RNCC: 5 | RNVC: 2
17110203: RNCC: 5 | RNVC: 2

9 Sep 2009

5340-12-349-8611
Angle Bracket

123498611
T291M1078101: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-12-150-9690

5340-12-368-5853
Dust And Moisture Seal Protective Cap

123685853
63101060: RNCC: 3 | RNVC: 2
EZ2181: RNCC: 5 | RNVC: 2

28 Mar 2006

5340-12-371-8188
Dust And Moisture Seal Protective Cap

123718188
1610508023: RNCC: 3 | RNVC: 2

21 May 2007

5340-12-352-2373
Mounting Bracket

123522373
2300387-640215.000: RNCC: 2 | RNVC: 2
9909504: RNCC: 3 | RNVC: 2
2300387-640215.000: RNCC: 5 | RNVC: 9
9909504: RNCC: 5 | RNVC: 9

27 Oct 2000

5340-12-392-1540
Loop Clamp

123921540
81804.691: RNCC: 3 | RNVC: 2
0019953265: RNCC: 5 | RNVC: 2

8 May 2013

5340-12-345-0143
Dashpot

123450143
150-400N-588605: RNCC: 3 | RNVC: 2
2002162001: RNCC: 5 | RNVC: 2

21 Jan 1998

5340-12-702-8546
Handle Grip

127028546
52-04045003304: RNCC: 2 | RNVC: 2

4 Jan 1996

5340-12-316-5787
Swivel Caster

123165787
L-V202R: RNCC: 3 | RNVC: 2
1240-500-200: RNCC: 3 | RNVC: 2
L-V202R: RNCC: 5 | RNVC: 2
1240-500-200: RNCC: 5 | RNVC: 2
1240-500-200: RNCC: 5 | RNVC: 9

25 Jan 1989

5340-12-378-6811
Swivel Caster

123786811
LK-POEV125K-3-FI: RNCC: 3 | RNVC: 2
LK-POEV125K-3-FL: RNCC: 5 | RNVC: 2

30 Apr 2009

5340-12-701-7993
Mounting Bracket

127017993
VG95211-ML-127017993: RNCC: 2 | RNVC: 2
5.12.8102.6008.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-379-4138
Access Cover

123794138
SK976-979410.001.0: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-12-197-7673
Angle Bracket

121977673
A-145401-104: RNCC: 3 | RNVC: 2
A145401-104: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-328-9148
Handle Grip

123289148
2300232-208300.008.0: RNCC: 2 | RNVC: 2
2300232-208300.008.0: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-198-9221
Butt Hinge

121989221
CF 311 522 R: RNCC: 3 | RNVC: 2
CF 311 522 R: RNCC: 5 | RNVC: 2
CF3115220R: RNCC: 5 | RNVC: 2
CF3115220R: RNCC: 5 | RNVC: 2
CF311522-R: RNCC: 5 | RNVC: 2

13 Mar 1984

5340-12-169-7999
Dust And Moisture Seal Protective Cap

121697999
LP-006-5-74: RNCC: 3 | RNVC: 2
LP006-5-74: RNCC: 5 | RNVC: 2
0740051114: RNCC: 5 | RNVC: 2
K30802-2: RNCC: 5 | RNVC: 2
LP-006-5-73-KU: RNCC: 5 | RNVC: 9

10 Jun 1977

5340-12-199-8290
Dust And Moisture Seal Protective Cap

121998290
536116-8011.000: RNCC: 2 | RNVC: 2
536116-8011.000: RNCC: 3 | RNVC: 2
536116-8011: RNCC: 5 | RNVC: 9
536166-8011: RNCC: 5 | RNVC: 9
536116-8011: RNCC: 5 | RNVC: 9
536116-8011.000: RNCC: 5 | RNVC: 9
536116-8011: RNCC: 5 | RNVC: 9
536116-8011.000: RNCC: 5 | RNVC: 9

2 Jun 1984

5340-12-373-5571
Bow Handle

123735571
1020165: RNCC: 3 | RNVC: 2
81.97001-6088: RNCC: 5 | RNVC: 2
81970016088: RNCC: 5 | RNVC: 2

14 Nov 2007

5340-12-374-6599
Mechanical Stop

123746599
SK872-162100.010.0: RNCC: 3 | RNVC: 2
7081338: RNCC: 5 | RNVC: 2
1719881: RNCC: 5 | RNVC: 9

5 Mar 2008

5340-12-315-5296
Butt Hinge Leaf

123155296
5803471-201210.02: RNCC: 2 | RNVC: 2
65.7789.421.02-A001: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-12-386-5054
Support Hook

123865054
120D185130.006.0: RNCC: 2 | RNVC: 2
120D185130.006.0: RNCC: 3 | RNVC: 2
1903433: RNCC: 5 | RNVC: 2

7 Sep 2011

5340-12-195-9741
Angle Bracket

121959741
160-24253-01: RNCC: 3 | RNVC: 2
160-24253-01: RNCC: 5 | RNVC: 9

10 May 1983

5340-12-393-2923
Angle Bracket

123932923
J92228394-403: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-363-3156
Clamping Catch

123633156
GSTR99-00-200000.03: RNCC: 3 | RNVC: 2

26 May 2004

5340-12-371-3304
Loop Clamp

123713304
2 0001-119: RNCC: 3 | RNVC: 2
2 0001-119: RNCC: 5 | RNVC: 2

15 Mar 2007

5340-12-308-4783
Pawl Fastener

123084783
51026: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-12-309-7917
Access Cover

123097917
6131601: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-122-0593

5340-12-187-5337
Resilient Mount

121875337
1205141010: RNCC: 3 | RNVC: 2
15770: RNCC: 5 | RNVC: 2
WILMA,553/957,W38: RNCC: 5 | RNVC: 2
W38: RNCC: 5 | RNVC: 9
WILMA,INDEX553/957: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-320-4998
Mounting Bracket

123204998
2654-330224.00: RNCC: 2 | RNVC: 2
2654-330224.00: RNCC: 3 | RNVC: 2
679-00030400: RNCC: 5 | RNVC: 9
679-00030400: RNCC: 5 | RNVC: 9
2654-330 224.00: RNCC: 5 | RNVC: 9

22 Jan 1990

5340-12-165-8746
Extension Drawer Slide

121658746
14-018-012: RNCC: 3 | RNVC: 2
22/57131.01: RNCC: 5 | RNVC: 9
998 6935 905241: RNCC: 5 | RNVC: 9
9986935905241: RNCC: 5 | RNVC: 9
22-57131-01: RNCC: 5 | RNVC: 9

8 Jul 1976

5340-12-199-5449
Metal Runner

121995449
2300088-411129.00: RNCC: 2 | RNVC: 2
2300088-411129.00: RNCC: 3 | RNVC: 2
2300088-411129.00: RNCC: 5 | RNVC: 9
9846693: RNCC: 5 | RNVC: 9
2300088-411129-00: RNCC: 5 | RNVC: 9

10 May 1984

5340-12-181-2003
Catch Strike

121812003
44-26949: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-12-363-6224
Loop Clamp

123636224
DIN3015-ZD2R-16-18-PA-W5: RNCC: 2 | RNVC: 2

9 Jul 2004

5340-12-198-7978
Mending Plate

121987978
5801998-294000.00: RNCC: 2 | RNVC: 2
5801998-294000.00: RNCC: 3 | RNVC: 2

27 Feb 1984

5340-12-702-6954
Friction Catch Stud Receptacle

127026954
25-08301003644: RNCC: 3 | RNVC: 2

29 Nov 1995

5340-12-334-7119
Butt Hinge

123347119
1056-U14: RNCC: 3 | RNVC: 2
218-9203: RNCC: 3 | RNVC: 2

10 Jun 1994

5340-12-337-7701
Nonmetallic Bumper

123377701
4609875040: RNCC: 3 | RNVC: 2
721 1 79 046 1: RNCC: 3 | RNVC: 9
S 721 1 79 046 1: RNCC: 5 | RNVC: 9

10 Apr 1995

5340-12-700-8624
Mounting Plate

127008624
VG95211-ML-127008624: RNCC: 2 | RNVC: 2
155N1358-076: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-384-5229
Mounting Bracket

123845229
F1.1189-30-10-10.00-63: RNCC: 3 | RNVC: 2

2 Mar 2011

5340-12-319-3385
Angle Bracket

123193385
6900117-114000: RNCC: 2 | RNVC: 2
774-062-73: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-12-344-3756
Double Angle Bracket

123443756
A-296850-007: RNCC: 3 | RNVC: 2
A296850-007: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-320-7584
Mounting Bracket

123207584
2300232-202130.000.0: RNCC: 2 | RNVC: 2
2300232-202130.000.0: RNCC: 3 | RNVC: 2
9997023-202130.000.0: RNCC: 5 | RNVC: 2
2300232-202130.000.02: RNCC: 5 | RNVC: 9

14 Feb 1990

5340-12-158-6142
Nonmetallic Bumper

121586142
DIN95364-E80X60-CR65ST: RNCC: 2 | RNVC: 2
1.80.60.5E.65CR/ST: RNCC: 5 | RNVC: 2
554014-M12.CR65.ST: RNCC: 5 | RNVC: 2
38653BSMQ6590: RNCC: 5 | RNVC: 2
38653SMQ650: RNCC: 5 | RNVC: 2
38653,CR65ST: RNCC: 5 | RNVC: 2
VG95364-E80X60-CR65ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-323-8919
Bow Handle

123238919
VG95149A100AL-FB: RNCC: 2 | RNVC: 2
RA-10.100.1.1: RNCC: 3 | RNVC: 2
RA-10.100.01.1: RNCC: 5 | RNVC: 2
3008060113: RNCC: 5 | RNVC: 2

8 Jan 1991

5340-12-701-6467
Angle Bracket

127016467
VG95211-ML-127016467: RNCC: 2 | RNVC: 2
5.12.7204.0970.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-1832
Mounting Bracket

127021832
VG95211-ML-127021832: RNCC: 2 | RNVC: 2
30.7206.1070: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-392-7409
Manual Control Handle

123927409
06320-306: RNCC: 3 | RNVC: 2

3 Jul 2013

5340-12-386-7373
Clamping Catch

123867373
11892: RNCC: 3 | RNVC: 2

27 Sep 2011

5340-12-346-9485
Synchro Clamp

123469485
361371: RNCC: 3 | RNVC: 2
361371: RNCC: 5 | RNVC: 2

1 Oct 1998

5340-12-327-9683
Mounting Plate

123279683
2653-330110.05: RNCC: 2 | RNVC: 2
2653-330110.05: RNCC: 3 | RNVC: 2

25 Mar 1992

5340-12-361-5642
Mounting Bracket

123615642
230.5028: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-12-379-2161
Veh Mounting Rail

123792161
10042095: RNCC: 3 | RNVC: 2

3 Jul 2009

5340-12-300-2335

5340-12-134-3481

5340-12-358-1059
Mounting Bracket

123581059
8.22.63: RNCC: 3 | RNVC: 2
8-22-63: RNCC: 5 | RNVC: 2

13 Sep 2002

5340-12-347-8869
Runner

123478869
5.043.134.9: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-12-392-7217
Rod Retainer Clip-Clevis

123927217
1-903668: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-12-361-4754
Dust And Moisture Seal Protective Cap

123614754
N 3526: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-312-1578
Helical Compression Spring Seat

123121578
1480526030: RNCC: 3 | RNVC: 2
1 480 526 030: RNCC: 5 | RNVC: 2
1480526030: RNCC: 5 | RNVC: 2
1480526030: RNCC: 5 | RNVC: 9

27 Nov 1987

5340-12-317-2208
Mounting Bracket

123172208
2300223-262221.00.0: RNCC: 2 | RNVC: 2
2300223-262221.00.0: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-12-365-2286
Access Cover

123652286
1837-231030.000.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-349-9902
Mechanical Stop

123499902
2500238-162500.001.0: RNCC: 2 | RNVC: 2
2500238-162500.001.0: RNCC: 3 | RNVC: 2

3 Feb 2000

5340-12-385-4320
Mounting Plate

123854320
2-10.007-570-001: RNCC: 3 | RNVC: 2
316-04-00-01-013: RNCC: 5 | RNVC: 2

1 Jun 2011

5340-12-147-2535
Webbing Strap

121472535
C42123-A16-A1: RNCC: 2 | RNVC: 2
C42123-A16-A1: RNCC: 3 | RNVC: 2
AW7100.230/4: RNCC: 3 | RNVC: 2
697487: RNCC: 5 | RNVC: 2
AW7100-230-4: RNCC: 5 | RNVC: 2
000-A2-25X2,0X200-PE-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-331-5433
Resilient Mount

123315433
630-0624-045: RNCC: 3 | RNVC: 2
SRM630-0624-045: RNCC: 3 | RNVC: 2
630-0624-045: RNCC: 5 | RNVC: 2
SRM:630-0624-045: RNCC: 5 | RNVC: 2

18 May 1993

5340-12-187-7099
Retaining Strap

121877099
VG95933ER-18-W1-BK: RNCC: 2 | RNVC: 2
1/2D9-18MMN325: RNCC: 3 | RNVC: 2
1/2D18MMN325: RNCC: 5 | RNVC: 2
700325018102: RNCC: 5 | RNVC: 2
1-2D18MMN325: RNCC: 5 | RNVC: 9

29 Apr 1981

5340-12-304-7899
Manual Control Handle

123047899
8.316.001.012.04.00: RNCC: 3 | RNVC: 2
8.216.000.132: RNCC: 5 | RNVC: 2
VHVX250-313-1P0S6: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-190-1185
Butt Hinge Leaf

121901185
2500075-730300.008.0: RNCC: 2 | RNVC: 2
2500075-730300.008.0: RNCC: 3 | RNVC: 2
2500075-730300-008-0: RNCC: 5 | RNVC: 9
2500075-730300.008.0: RNCC: 5 | RNVC: 9
2500075-730300-008-0: RNCC: 5 | RNVC: 9

9 Nov 1981

5340-12-389-4410
Clamping Catch

123894410
6004-U26-KA: RNCC: 3 | RNVC: 2

6 Jul 2012

5340-12-190-0352
Webbing Strap

121900352
5801445-30000.003: RNCC: 2 | RNVC: 2
5801445-30000.003: RNCC: 3 | RNVC: 2
5801445-30000.003: RNCC: 5 | RNVC: 9
000-E4-20X1,2X1450-PE-RAL6031: RNCC: 6 | RNVC: 9

4 Nov 1981

5340-12-386-0609
Rod End Connector

123860609
70-571: RNCC: 3 | RNVC: 2

4 Aug 2011

5340-12-383-7805
Angle Bracket

123837805
601241-202400.01: RNCC: 2 | RNVC: 2
601241-202400.01: RNCC: 3 | RNVC: 2

7 Dec 2010

5340-12-183-7419
Spring Tension Clip

121837419
26 863-001: RNCC: 3 | RNVC: 2
26863-001: RNCC: 5 | RNVC: 2

15 May 1980

5340-12-198-5314
Webbing Strap

121985314
5801997-150000.00: RNCC: 2 | RNVC: 2
5801997-150000.00: RNCC: 3 | RNVC: 2

7 Feb 1984

5340-12-333-5704
Mending Plate

123335704
G32960-W0183-C122: RNCC: 3 | RNVC: 2

6 Jan 1994

5340-12-184-9861
Mounting Bracket

121849861
F01-240000.05.0: RNCC: 3 | RNVC: 2
F01-240000-05-0: RNCC: 5 | RNVC: 9

30 Aug 1980

5340-12-303-2061
Angle Bracket

123032061
4900123-620031.01: RNCC: 2 | RNVC: 2
4900123-620031.01: RNCC: 3 | RNVC: 2
4900123-620031.01: RNCC: 5 | RNVC: 9

6 Mar 1985

5340-12-364-4491
Double Angle Bracket

123644491
54.1105.183.00: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-306-8222
Catch Strike

123068222
54.0042.346.06: RNCC: 3 | RNVC: 2

7 Apr 1986

5340-12-371-2952
Pad Eye

123712952
8350-0052: RNCC: 2 | RNVC: 2
8350-0052: RNCC: 3 | RNVC: 2

9 Mar 2007

5340-12-340-4287
Mounting Plate

123404287
V048R1: RNCC: 3 | RNVC: 2
PL E 7/1 P-32: RNCC: 5 | RNVC: 2
V048R1 (IDVCS065-117.895): RNCC: 5 | RNVC: 2

12 Apr 1996

5340-12-343-1870
Shimmy Damper

123431870
E.ST.W85.300-3100-05: RNCC: 3 | RNVC: 2
E.ST.W85.300-3100-05: RNCC: 5 | RNVC: 9

15 May 1997

5340-12-345-3102
Access Door Hinge

123453102
9892249: RNCC: 3 | RNVC: 9
463-206050.003: RNCC: 5 | RNVC: 9

2 Mar 1998

5340-12-344-2355
Helical Compression Spring Seat

123442355
6761249951: RNCC: 3 | RNVC: 2
0001810088: RNCC: 5 | RNVC: 2
0001810088: RNCC: 5 | RNVC: 2
000 181 00 88: RNCC: 5 | RNVC: 2
0001810088: RNCC: 5 | RNVC: 2

6 Oct 1997

5340-12-330-4140
Access Door

123304140
23305-189410.00.0: RNCC: 2 | RNVC: 2
23305-189410.00.0: RNCC: 3 | RNVC: 2
23305-189410-00-0: RNCC: 5 | RNVC: 9
23305-189410.00.0: RNCC: 5 | RNVC: 9

11 Dec 1992

5340-12-093-7465

5340-12-354-1686
Multiple Angle Bracket

123541686
6600211-200110.00: RNCC: 2 | RNVC: 2
6600211-200110.00: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-326-5867
Mending Plate

123265867
30-99070-0066: RNCC: 3 | RNVC: 2

10 Oct 1991

5340-12-393-3553
Lock-Release Lever

123933553
598101-188400.001.0: RNCC: 2 | RNVC: 2
598101-188400.001.0: RNCC: 3 | RNVC: 2

10 Sep 2013

5340-12-199-4134
Nonmetallic Bumper

121994134
1748-020-001: RNCC: 3 | RNVC: 2
0003231585: RNCC: 5 | RNVC: 2

19 Apr 1984

5340-12-394-5387
Veh Mounting Rail

123945387
4052063132026: RNCC: 3 | RNVC: 2
I012673: RNCC: 5 | RNVC: 2

11 Dec 2013

5340-12-700-8919
Loop Clamp

127008919
2-6-8-3-1 CHIM.PAS. OST1 11125--: RNCC: 3 | RNVC: 1

6 Feb 1995

5340-12-388-2753
Mounting Plate

123882753
F1.1697-00-01-13.00-10: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-12-166-8939

5340-12-361-6753
Magnetic Catch

123616753
246.26.711: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-381-5533
Rigid Caster

123815533
681/N.47: RNCC: 3 | RNVC: 2
681/N47-WHITE: RNCC: 5 | RNVC: 2

3 Mar 2010

5340-12-701-5649
Mounting Bracket

127015649
VG95211-ML-127015649: RNCC: 2 | RNVC: 2
5.12.6114.3220.19: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-143-9667
Clamping Catch

121439667
450-4-05-2: RNCC: 3 | RNVC: 2
05-01-11: RNCC: 5 | RNVC: 2
450-4-05-2: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-0408
Catch Strike

121960408
5801995-190320.01.0: RNCC: 2 | RNVC: 2
5801995-190320.01.0: RNCC: 5 | RNVC: 2
5801995-190320.01.0: RNCC: 5 | RNVC: 9

24 May 1983

5340-12-702-5553
Angle Bracket

127025553
VG95211-ML-127025553: RNCC: 2 | RNVC: 2
5.51.7226.0000.13: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-149-3838
Retaining Clip

121493838
2360-262310.07.0: RNCC: 3 | RNVC: 2
2360-262310.07.0: RNCC: 5 | RNVC: 2
2360-262310-07-0: RNCC: 5 | RNVC: 2
2360-262310.07.0: RNCC: 5 | RNVC: 2
2360-262310.07.0: RNCC: 5 | RNVC: 9
2360-262310-07-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-162-5391
Handle Grip

121625391
T1-30-2: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-194-0382
Nonmetallic Bumper

121940382
308751: RNCC: 3 | RNVC: 2
2300126-102000.000.0: RNCC: 5 | RNVC: 2
2300126-102000.000.0: RNCC: 5 | RNVC: 2
093.04.0072: RNCC: 5 | RNVC: 2
2300126-102000.000.0: RNCC: 5 | RNVC: 9

27 Sep 1982

5340-12-367-6687
Bail Handle

123676687
SK861-850022.000.0: RNCC: 3 | RNVC: 2

21 Sep 2005

5340-12-181-7314
Retaining Strap

121817314
2300033-540200.03: RNCC: 2 | RNVC: 2
2300033-540200.03: RNCC: 5 | RNVC: 9
2300033-540200.03: RNCC: 5 | RNVC: 9
FTW302-05-07-03-24: RNCC: 5 | RNVC: 9
2300033-540200-03: RNCC: 5 | RNVC: 9

12 Dec 1979

5340-12-700-4993
Flush Catch

127004993
VG95211-ML-127004993: RNCC: 2 | RNVC: 2
1900AB/14: RNCC: 3 | RNVC: 2
0500810087069: RNCC: 5 | RNVC: 2

19 Sep 1992

5340-12-163-9489
Retaining Strap

121639489
V22.228.520000-11: RNCC: 3 | RNVC: 2
V2-228-520000-11: RNCC: 5 | RNVC: 2
V2.228.520000-11: RNCC: 5 | RNVC: 2
V22-228-520000-11EZ4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-383-6879
Rigid Caster

123836879
ZK.A0111-0500: RNCC: 3 | RNVC: 2

25 Nov 2010

5340-12-189-1652
Luggage Handle

121891652
9090/190CSW+2765OZ-NSN10-0: RNCC: 3 | RNVC: 2
372.53442: RNCC: 5 | RNVC: 2
9090/190C601(15X0,3F1)+2765OZNSN: RNCC: 5 | RNVC: 2
ZB4BSCHWARZ: RNCC: 5 | RNVC: 9
35-46-9ZB4BSCHWARZ: RNCC: 5 | RNVC: 9
35.46.9: RNCC: 5 | RNVC: 9
9090+2765: RNCC: 5 | RNVC: 9

7 Sep 1981

5340-12-317-3194
Mending Plate

123173194
4900064-4121.013: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-386-2235
Mechanical Stop

123862235
2481-392830.001.0: RNCC: 3 | RNVC: 2

17 Aug 2011

5340-12-193-2027
Plug Button

121932027
3390522009: RNCC: 3 | RNVC: 2
0008240849: RNCC: 5 | RNVC: 2
721 2 85 255 1: RNCC: 5 | RNVC: 9

30 Jun 1982

5340-12-348-0281
Nonmetallic Bumper

123480281
81962100511: RNCC: 3 | RNVC: 2
B 77 127 31: RNCC: 3 | RNVC: 9
81.96210.0511: RNCC: 5 | RNVC: 2

29 Mar 1999

5340-12-322-3277
Butt Hinge Leaf

123223277
1742.5.8.414: RNCC: 3 | RNVC: 2
103778: RNCC: 5 | RNVC: 2

10 Aug 1990

5340-12-389-4405
Mounting Plate

123894405
1.316-205200.00: RNCC: 2 | RNVC: 2
1.316-205200.00: RNCC: 5 | RNVC: 2

6 Jul 2012

5340-12-701-8225
Mounting Bracket

127018225
5.14.7701.2960.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-307-7030
Mending Plate

123077030
RP981719/2: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-197-7592
Catch Strike

121977592
107829: RNCC: 3 | RNVC: 2

22 Nov 1983

5340-12-346-4798
Nonmetallic Bumper

123464798
81960200058: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-12-304-9731
Mending Plate

123049731
5802028-3550: RNCC: 2 | RNVC: 2
7802070440: RNCC: 3 | RNVC: 2
78020 70440: RNCC: 5 | RNVC: 9

12 Sep 1985

5340-12-325-8004
Nonmetallic Bumper

123258004
5801984-100030.000.0POS14: RNCC: 2 | RNVC: 2
FLACHGUMMI10X1X2625MM.NR35: RNCC: 3 | RNVC: 2
5801984-100030.000.0P0S14: RNCC: 5 | RNVC: 2

11 Jul 1991

5340-12-182-3578
Metal Runner

121823578
C104-A24-C15: RNCC: 2 | RNVC: 2
C104-A24-C15: RNCC: 3 | RNVC: 2
C104A24C15: RNCC: 5 | RNVC: 2
C104-A24-C15: RNCC: 5 | RNVC: 2
C104A24C15: RNCC: 5 | RNVC: 2

28 Jan 1980

5340-12-305-0194
Angle Bracket

123050194
5801759-060000.003: RNCC: 2 | RNVC: 2
5801759-060000.003: RNCC: 3 | RNVC: 2
5801759-060000.003: RNCC: 5 | RNVC: 9

17 Sep 1985

5340-12-318-0621
Clamping Catch

123180621
V46L14-3AA: RNCC: 3 | RNVC: 2
351282500630: RNCC: 5 | RNVC: 2

8 Jun 1989

5340-12-373-0212
Dust And Moisture Seal Boot

123730212
84150/6249-17: RNCC: 3 | RNVC: 2

18 Sep 2007

5340-12-360-9396
Angle Bracket

123609396
PIK VWI 60/60: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-309-6576
Kunst Gleitschiene

123096576
60817-026: RNCC: 3 | RNVC: 2

13 Feb 1987

5340-12-306-9097
Rod End Clevis

123069097
DIN71752-G8X16LH-A3P: RNCC: 2 | RNVC: 2
DIN71752-G8X16LH-A3P: RNCC: 3 | RNVC: 2
110200080016/024: RNCC: 3 | RNVC: 2
DIN71752-G8X16LH-A3P: RNCC: 3 | RNVC: 2
G8X16LINKSDIN71752: RNCC: 5 | RNVC: 2
DIN71752-G8X16LINKS: RNCC: 5 | RNVC: 9

16 Apr 1986

5340-12-379-6664
Access Cover

123796664
1000042-00-821000.17: RNCC: 2 | RNVC: 2
1000042-00-821000.17: RNCC: 3 | RNVC: 2

20 Aug 2009

5340-12-359-1573
Multiple Angle Bracket

123591573
J92228200-403: RNCC: 3 | RNVC: 2

6 Jan 2003

5340-12-182-6958
Dust And Moisture Seal Protective Plug

121826958
0631 405 007: RNCC: 3 | RNVC: 2
HK080CK11-111: RNCC: 3 | RNVC: 2
2873613: RNCC: 5 | RNVC: 2
2873613EZ8928-63: RNCC: 5 | RNVC: 2
41490100800: RNCC: 5 | RNVC: 2
8ATE N 144 71: RNCC: 5 | RNVC: 2
0287 3613: RNCC: 5 | RNVC: 2
41.4901-0080.0: RNCC: 5 | RNVC: 9
8ATE N14471: RNCC: 5 | RNVC: 9

22 Feb 1980

5340-12-391-6956
Expansion Plug

123916956
5840 333 128: RNCC: 3 | RNVC: 2
5001846862: RNCC: 5 | RNVC: 2

27 Mar 2013

5340-12-393-5050
Mounting Plate

123935050
4373112455: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-368-9689
Retaining Strap

123689689
1018205: RNCC: 3 | RNVC: 2

9 May 2006

5340-12-702-3730
Loop Clamp

127023730
VG95211-ML-127023730: RNCC: 2 | RNVC: 2
5.12.5101.0202.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-311-5977
Angle Bracket

123115977
A-243799-021: RNCC: 3 | RNVC: 2
A243799-021: RNCC: 5 | RNVC: 2

23 Sep 1987

5340-12-321-4882
Angle Bracket

123214882
702-184000-906-0: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-184-8582
Mounting Bracket

121848582
F01-212310.06.1: RNCC: 3 | RNVC: 2
F01-212310-06-1: RNCC: 5 | RNVC: 9

23 Aug 1980

5340-12-323-9989
Multiple Angle Bracket

123239989
702-237321-901-0: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-12-701-6637
Mounting Bracket

127016637
VG95211-ML-127016637: RNCC: 2 | RNVC: 2
5.12.7210.1790.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-368-7898
Access Cover

123687898
2300495-182004.000.0: RNCC: 3 | RNVC: 2
1775651: RNCC: 5 | RNVC: 9

20 Apr 2006

5340-12-337-3060
Mending Plate

123373060
702-133100-903-0: RNCC: 2 | RNVC: 2
702-133100-903-0: RNCC: 3 | RNVC: 2

14 Feb 1995

5340-12-343-0890
Resilient Mount

123430890
0816 9873: RNCC: 3 | RNVC: 2
08169873: RNCC: 5 | RNVC: 2
8169873EZ50-5831: RNCC: 5 | RNVC: 2

28 Apr 1997

5340-12-185-0337
Butt Hinge Leaf

121850337
F01-240144-00-0: RNCC: 3 | RNVC: 2

4 Sep 1980

5340-12-159-7261
Compression Cup

121597261
H175-1-88NBR/101: RNCC: 3 | RNVC: 2
H175-1-14PA101: RNCC: 5 | RNVC: 2
H175-1-88NBR101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-318-0940
Mending Plate

123180940
1000192-01 2 30000.06: RNCC: 2 | RNVC: 2
1000192-01 2 30000.06: RNCC: 3 | RNVC: 2
10003-01 2 30000.24: RNCC: 5 | RNVC: 9
1000192-01230000.06: RNCC: 5 | RNVC: 9
1000192-01 2 30000.06: RNCC: 5 | RNVC: 9
1000192-01230000.06: RNCC: 5 | RNVC: 9
1000192-01230000.06: RNCC: 5 | RNVC: 9

12 Jun 1989

5340-12-323-9607
Retaining Strap

123239607
A3-2127/2128-01-0: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-12-701-9749
Rod End Connector

127019749
VG95211-ML-127019749: RNCC: 2 | RNVC: 2
1-2-590 OST1 10232-71: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-195-7127
Nonmetallic Bumper

121957127
104819: RNCC: 3 | RNVC: 2

31 Mar 1983

5340-12-390-4059
Retaining Strap

123904059
2300559-060000.025.0: RNCC: 2 | RNVC: 2
2300559-060000.025.0: RNCC: 3 | RNVC: 2

8 Nov 2012

5340-12-369-7465
Rod End Clevis

123697465
GN751-6-12-M6-B: RNCC: 3 | RNVC: 2
7081547: RNCC: 5 | RNVC: 2

15 Aug 2006

5340-12-701-4622
Loop Clamp

127014622
VG95211-ML-127014622: RNCC: 2 | RNVC: 2
5.12.5314.8070.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-0048
Rigid Caster

121870048
3900054-200000.12: RNCC: 2 | RNVC: 2
1750.5.5.421: RNCC: 3 | RNVC: 2
3900054-200000-12: RNCC: 3 | RNVC: 2
3900054-200000-12: RNCC: 5 | RNVC: 2
1750-5-5-421: RNCC: 5 | RNVC: 2

25 Feb 1981

5340-12-326-2291
Cremone Bolt

123262291
0.33.0111.3: RNCC: 3 | RNVC: 2
0.33.111.3: RNCC: 5 | RNVC: 2
FT6100131-173: RNCC: 5 | RNVC: 9

20 Aug 1991

5340-12-301-4319
Angle Bracket

123014319
P-855207-003: RNCC: 3 | RNVC: 2
P855207-003: RNCC: 5 | RNVC: 2

13 Oct 1984

5340-12-176-7252
Detent Plunger

121767252
WW 419 173 B: RNCC: 2 | RNVC: 2
WW 419 173 B: RNCC: 3 | RNVC: 9
WW419173A: RNCC: 3 | RNVC: 9
WW 419 173 A: RNCC: 5 | RNVC: 2
WW 419 173 B: RNCC: 5 | RNVC: 2
WW419173A: RNCC: 5 | RNVC: 2
WW 419 173 A: RNCC: 5 | RNVC: 9

15 Dec 1978

5340-12-386-3445
Bumper

123863445
2481-393360.000.0: RNCC: 2 | RNVC: 2
2481-393360.000.0: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-12-386-6120
Angle Bracket

123866120
1.314-201300.00: RNCC: 2 | RNVC: 2
1.314-201300.00: RNCC: 5 | RNVC: 2

15 Sep 2011

5340-12-179-3701
Platte

121793701
CF305955A: RNCC: 3 | RNVC: 2
CF 305 955 A: RNCC: 5 | RNVC: 2
CF305955A: RNCC: 5 | RNVC: 2
CF 305 955 A: RNCC: 5 | RNVC: 2
CF305955A: RNCC: 5 | RNVC: 2
CF 305 955 A: RNCC: 5 | RNVC: 2

27 Jun 1979

5340-12-164-0825
Mending Plate

121640825
100356-208050-02: RNCC: 2 | RNVC: 2
100356-208050-02: RNCC: 5 | RNVC: 2
100356-208050.02: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-355-9503
Mending Plate

123559503
J92220536-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-316-2767
Luggage Handle

123162767
9090/190CSW+6202OZ-FMN41: RNCC: 3 | RNVC: 2
9090/190CSW601+6202OZ-FMN41: RNCC: 5 | RNVC: 2
91613974: RNCC: 5 | RNVC: 2
9516-190MMNOIR601: RNCC: 5 | RNVC: 9

5 Jan 1989

5340-12-311-6511
Clamping Catch

123116511
DIN3132-D50-K15X45STZN8: RNCC: 2 | RNVC: 2

1 Oct 1987

5340-12-155-4979
Rod End Clevis

121554979
VG95211-ML-121554979: RNCC: 2 | RNVC: 2
160-71017-02: RNCC: 3 | RNVC: 2
160-71017-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-8586
Swivel Caster

123138586
LK-RU-200LRO-DS: RNCC: 3 | RNVC: 2
165M LK-RU-200LRO-DS: RNCC: 5 | RNVC: 2

12 May 1988

5340-12-198-8107
Pad Eye

121988107
25704-193200.01.0: RNCC: 2 | RNVC: 2
25704-193200.01.0: RNCC: 3 | RNVC: 2
25704-193200-01-0: RNCC: 5 | RNVC: 2
25704-193200.01.0: RNCC: 5 | RNVC: 9

28 Feb 1984

5340-12-306-3096
Casement Fastener

123063096
421-112060.00.8: RNCC: 3 | RNVC: 2
421-112060-00-8: RNCC: 5 | RNVC: 2

18 Feb 1986

5340-12-196-2382
Hinge Torsion Bar

121962382
65302: RNCC: 3 | RNVC: 2
81.62691.2005: RNCC: 5 | RNVC: 2
81626912005: RNCC: 5 | RNVC: 2

15 Jun 1983

5340-12-309-4580
Friction Catch Stud

123094580
6030064: RNCC: 3 | RNVC: 2
01245668: RNCC: 5 | RNVC: 2
161226301: RNCC: 5 | RNVC: 2

27 Jan 1987

5340-12-327-9967
Retaining Strap

123279967
4618261114: RNCC: 3 | RNVC: 2

27 Mar 1992

5340-12-321-4884
Nonmetallic Bumper

123214884
702-238320-906-0: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-341-0283
Access Cover

123410283
2500262-191300.000.0: RNCC: 2 | RNVC: 2
2500262-191300.000.0: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-12-148-3734
Resilient Mount

121483734
82601601: RNCC: 3 | RNVC: 2
420-205-B-04.02: RNCC: 3 | RNVC: 2
420-205-B-04.02: RNCC: 5 | RNVC: 2
29E02-05-04-02: RNCC: 5 | RNVC: 2
420-205B04-02: RNCC: 5 | RNVC: 2
420-205B0402: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-326-4819
Hasp Staple

123264819
1490-4610.47: RNCC: 3 | RNVC: 2
3200005-5,2 MM BOHRUNGEN: RNCC: 3 | RNVC: 2
8920-5,2 MM BOHRUNGEN: RNCC: 3 | RNVC: 2
1490-4610.47: RNCC: 5 | RNVC: 2
8920-5,2 MM BOHRUNGEN GEWOELBT: RNCC: 5 | RNVC: 2

23 Sep 1991

5340-12-700-8592
Threaded End Tensioning Tie Rod

127008592
VG95211-ML-127008592: RNCC: 2 | RNVC: 2
155N1220-25-1,5-683: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-195-0065
Retaining Clip

121950065
4915294-00-5: RNCC: 3 | RNVC: 2
491.52.94-00/5: RNCC: 5 | RNVC: 2
5529400: RNCC: 5 | RNVC: 2
SV-0059-72: RNCC: 5 | RNVC: 2
T054915294-00-5: RNCC: 5 | RNVC: 2
T054915294-00-5: RNCC: 5 | RNVC: 9

29 Dec 1982

5340-12-701-3240
Mounting Bracket

127013240
VG95211-ML-127013240: RNCC: 2 | RNVC: 2
5.12.5101.8230.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-344-4004
Mounting Bracket

123444004
2500075-068110.000.0: RNCC: 3 | RNVC: 2
2500075-068110-000-0: RNCC: 5 | RNVC: 9

23 Oct 1997

5340-12-188-9609
Friction Catch Stud Receptacle

121889609
5801433-070200.04.0: RNCC: 3 | RNVC: 2
5801433-070200-04-0: RNCC: 5 | RNVC: 2
5801433-070200-04-0: RNCC: 5 | RNVC: 9
5801433-070200.04.0: RNCC: 5 | RNVC: 9

12 Aug 1981

5340-12-358-4237
Access Cover

123584237
2500262-190226.000.0: RNCC: 2 | RNVC: 2
2500262-190226.000.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-173-7079
Dust And Moisture Seal Protective Cap

121737079
1420500005: RNCC: 3 | RNVC: 2
1 420 500 005: RNCC: 5 | RNVC: 2
1420500005: RNCC: 5 | RNVC: 2
0855405900: RNCC: 5 | RNVC: 2
0229400: RNCC: 5 | RNVC: 2
23310149042: RNCC: 5 | RNVC: 2
229400: RNCC: 5 | RNVC: 9

3 May 1978

5340-12-195-2145
Manual Control Handle

121952145
910-191-202: RNCC: 3 | RNVC: 9

26 Jan 1983

5340-12-188-6717
Electrical-Mechanical Equipment Post

121886717
2944530526: RNCC: 3 | RNVC: 2
944.53.09-01: RNCC: 5 | RNVC: 2
944-53-09-01: RNCC: 5 | RNVC: 9

23 Jul 1981

5340-12-386-4581
Rod End Connector

123864581
009-222.475-000: RNCC: 3 | RNVC: 2

2 Sep 2011

5340-12-186-0613
Plain Solid Disk

121860613
374-601: RNCC: 3 | RNVC: 2
0008350281: RNCC: 5 | RNVC: 2
1069-8010-0407: RNCC: 5 | RNVC: 2
374.601: RNCC: 5 | RNVC: 2
E1069-8010-0407: RNCC: 5 | RNVC: 2

27 Nov 1980

5340-12-347-3595
Padlock

123473595
85/40 KA: RNCC: 3 | RNVC: 2
85.40 KA: RNCC: 5 | RNVC: 9

1 Dec 1998

5340-12-355-5297
Mounting Plate

123555297
2125-025250.02B: RNCC: 2 | RNVC: 2
2125-025250.02B: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-193-0030
Butt Hinge

121930030
1434-4942-04: RNCC: 3 | RNVC: 2
1434-4942-04: RNCC: 5 | RNVC: 2
1434-4942.04: RNCC: 5 | RNVC: 2

11 Jun 1982

5340-12-701-6550
Mounting Bracket

127016550
VG95211-ML-127016550: RNCC: 2 | RNVC: 2
5.12.7208.0610.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-325-8963
Webbing Strap

123258963
714-004000-910-0: RNCC: 3 | RNVC: 2

19 Jul 1991

5340-12-383-9441
Access Cover

123839441
6.777-334.0: RNCC: 3 | RNVC: 2

27 Dec 2010

5340-12-701-3363
Loop Clamp

127013363
VG95211-ML-127013363: RNCC: 2 | RNVC: 2
5.12.5111.0304.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-360-5102
Double Angle Bracket

123605102
2500294-050-03: RNCC: 3 | RNVC: 2
2500 294-050-03: RNCC: 5 | RNVC: 2

28 May 2003

5340-12-303-0268
Rod End Connector

123030268
2500135-194500.001.0: RNCC: 2 | RNVC: 2
2500135-194500.001.0: RNCC: 3 | RNVC: 2

21 Feb 1985

5340-12-321-4463
Mounting Bracket

123214463
2300269-222300.000.0: RNCC: 2 | RNVC: 2
2300269-222300.000.0: RNCC: 3 | RNVC: 2
790-52.13.000-25: RNCC: 5 | RNVC: 2

21 May 1990

5340-12-196-3058
Hand Crank

121963058
351-002-621163-000-0: RNCC: 3 | RNVC: 2
351-002-621163-000-0: RNCC: 5 | RNVC: 2
351-002-621163-000-0: RNCC: 5 | RNVC: 9

27 Jun 1983

5340-12-181-7417
Dust And Moisture Seal Protective Plug

121817417
HK120CK11-111: RNCC: 3 | RNVC: 2
0287 3615: RNCC: 5 | RNVC: 2
2873615: RNCC: 5 | RNVC: 2
2873615EZ8928-63: RNCC: 5 | RNVC: 2
12ATE N14471: RNCC: 5 | RNVC: 2
41.4901-0120.0: RNCC: 5 | RNVC: 2
21161-9-513: RNCC: 5 | RNVC: 2

14 Dec 1979

5340-12-341-0281
Access Door

123410281
2500262-191000.000.0: RNCC: 2 | RNVC: 2
2500262-191000.000.0: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-12-360-6773
Mounting Plate

123606773
9997036-990100.011.0: RNCC: 3 | RNVC: 2

27 Jun 2003

5340-12-701-1703
Mounting Bracket

127011703
VG95211-ML-127011703: RNCC: 2 | RNVC: 2
5.12.0238.1002.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-322-8900
Protection Bellows

123228900
0134.038.00.00/482: RNCC: 3 | RNVC: 2
0455849: RNCC: 5 | RNVC: 2
134.38.00/482: RNCC: 5 | RNVC: 2

4 Oct 1990

5340-12-376-9337
Rigid Caster

123769337
PO250/25K: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-12-363-3303
Loop Clamp

123633303
DIN3016-1-D1-40X20-W5-NBR: RNCC: 2 | RNVC: 2

27 May 2004

5340-12-305-1152
Mending Plate

123051152
4900059-122000.002.0: RNCC: 3 | RNVC: 2
1223781: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-183-1624
Platte

121831624
1X56 136 515-48: RNCC: 3 | RNVC: 2
81.66850-0033: RNCC: 5 | RNVC: 2
81668500033: RNCC: 5 | RNVC: 2
1X56136515-48: RNCC: 5 | RNVC: 9

25 Mar 1980

5340-12-306-6695
Dust And Moisture Seal Protective Cap

123066695
67 478: RNCC: 3 | RNVC: 9

19 Mar 1986

5340-12-362-3071
Loop Clamp

123623071
LN9490BK18: RNCC: 2 | RNVC: 2

5 Feb 2004

5340-12-359-7399
Mounting Plate

123597399
272.496.832: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-350-8139
Angle Bracket

123508139
105-961065: RNCC: 3 | RNVC: 2

24 May 2000

5340-12-350-5936
Spacing Threaded Standoff

123505936
54.1038.130.09: RNCC: 2 | RNVC: 2
54.1038.130.09: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-300-4591
Sealing Plug Assembly

123004591
05641: RNCC: 3 | RNVC: 2
05641: RNCC: 5 | RNVC: 9
05641: RNCC: 5 | RNVC: 9

3 Aug 1984

5340-12-316-6476
Rod End Clevis

123166476
6381436: RNCC: 3 | RNVC: 2

31 Jan 1989

5340-12-394-5368
Mounting Bracket

123945368
4052063128807: RNCC: 3 | RNVC: 2
I012339: RNCC: 5 | RNVC: 2

11 Dec 2013

5340-12-179-5164
Clamping Catch

121795164
1823UNDC18: RNCC: 3 | RNVC: 2

4 Jul 1979

5340-12-361-5044
Arched Cushion

123615044
1195166: RNCC: 3 | RNVC: 2

9 Oct 2003

5340-12-090-7481

5340-12-326-6055
Headless Straight Rod

123266055
8007443: RNCC: 3 | RNVC: 2

11 Oct 1991

5340-12-190-9704
Dust And Moisture Seal Protective Cap

121909704
1217 307 063: RNCC: 3 | RNVC: 2
01278670: RNCC: 5 | RNVC: 2
1217307063: RNCC: 5 | RNVC: 2
0215907: RNCC: 5 | RNVC: 2
1217307063: RNCC: 5 | RNVC: 9
215907: RNCC: 5 | RNVC: 9

29 Dec 1981

5340-12-339-6962
Handle Grip

123396962
200 8086: RNCC: 3 | RNVC: 2
0009193360: RNCC: 5 | RNVC: 2

21 Dec 1995

5340-12-163-3832
Expansion Plug

121633832
03195000: RNCC: 3 | RNVC: 2
03195000-244: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-304-8234
Lock-Release Lever

123048234
2300126-181304.000.0: RNCC: 2 | RNVC: 2
2300126-181304.000.0: RNCC: 3 | RNVC: 2
2300126-181304.000.0: RNCC: 5 | RNVC: 2
2300126-181304.000.0: RNCC: 5 | RNVC: 9

28 Aug 1985

5340-12-196-9994
Webbing Strap

121969994
4900059-342048.000.0: RNCC: 2 | RNVC: 2
01803-2-SCHLAUFE-FE500MM-LE800MM: RNCC: 3 | RNVC: 2
4900059-342048.000.0: RNCC: 3 | RNVC: 2
221-00-358-3: RNCC: 3 | RNVC: 2
79016/SCHLAUFE-1300-500: RNCC: 3 | RNVC: 2
4900059-342048.000.0: RNCC: 3 | RNVC: 2
4900059-342048.000.0: RNCC: 3 | RNVC: 2
4900059-342048-000-0: RNCC: 5 | RNVC: 2
221-00-358-3: RNCC: 5 | RNVC: 9
DIN60060-2-50X500X800-C1/SCHLAUF: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-192-3212
Clip Retainer Plate

121923212
5-615-0133: RNCC: 3 | RNVC: 2

13 Apr 1982

5340-12-701-8254
Mounting Plate

127018254
VG95211-ML-127018254: RNCC: 2 | RNVC: 2
5.84.6102.4130.00: RNCC: 3 | RNVC: 2
84-6102-4130: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-359-4366
Loop Clamp

123594366
DIN3016-1-E1-24X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-701-7132
Loop Clamp

127017132
VG95211-ML-127017132: RNCC: 2 | RNVC: 2
5.12.7601.3270.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6453
Loop Clamp

127016453
VG95211-ML-127016453: RNCC: 2 | RNVC: 2
5.12.7204.0800.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-146-7164
Retaining Strap

121467164
VG95933AR-28-W1-BK-11MM BOHRUNG: RNCC: 2 | RNVC: 2
1/1D11-28MMN325: RNCC: 3 | RNVC: 2
135M19025: RNCC: 5 | RNVC: 2
135M19025/1: RNCC: 5 | RNVC: 2
700325028105: RNCC: 5 | RNVC: 2
135M19025: RNCC: 5 | RNVC: 2
5509950668: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-175-2456
Retaining Strap

121752456
6.6208-0134.1: RNCC: 3 | RNVC: 2
6-6208-0134-1: RNCC: 5 | RNVC: 2

4 Sep 1978

5340-12-320-6465
Angle Bracket

123206465
957-210001.08.0: RNCC: 3 | RNVC: 2

5 Feb 1990

5340-12-319-9640
Access Cover

123199640
852-277000.01.0: RNCC: 2 | RNVC: 2
852-277000.01.0: RNCC: 3 | RNVC: 2
852-277000.01.0: RNCC: 5 | RNVC: 9

23 Nov 1989

5340-12-390-4020
Lock-Release Lever

123904020
2300559-186035.000.0: RNCC: 2 | RNVC: 2
2300559-186035.000.0: RNCC: 3 | RNVC: 2

8 Nov 2012

5340-12-326-6878
Resilient Mount

123266878
DIN95369-A5-4-CR-ST: RNCC: 2 | RNVC: 2
1340401040: RNCC: 3 | RNVC: 2
C4300: RNCC: 5 | RNVC: 2
0716111030: RNCC: 5 | RNVC: 2
151009-M16-CR.ST-70: RNCC: 5 | RNVC: 2
151009.CR70: RNCC: 5 | RNVC: 2
60400070: RNCC: 5 | RNVC: 2
VG95369-A5-4-CR-ST: RNCC: 5 | RNVC: 9
VG95369A5-4-CR-ST: RNCC: 5 | RNVC: 9
C4300: RNCC: 5 | RNVC: 9

22 Oct 1991

5340-12-188-6785
Butt Hinge

121886785
A-245875-013: RNCC: 3 | RNVC: 2
A245875-013: RNCC: 5 | RNVC: 2

23 Jul 1981

5340-12-364-8272
Dust And Moisture Seal Protective Plug

123648272
207022: RNCC: 3 | RNVC: 2

5 Nov 2004

5340-12-351-4170
Track Stop

123514170
10063-231000.03: RNCC: 3 | RNVC: 2
10063-231000.03: RNCC: 5 | RNVC: 9

25 Jul 2000

5340-12-043-3059

5340-12-358-7658
Mounting Bracket

123587658
9412605462: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-317-2990
Nonmetallic Bumper

123172990
VG95092B14X5X22X9X10NR65: RNCC: 2 | RNVC: 2
3229870840: RNCC: 3 | RNVC: 2
VG95092B14X5X22X9X10NR65: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-317-9069
Lever Bracket

123179069
1000042-193610.07: RNCC: 3 | RNVC: 2

24 May 1989

5340-12-319-1463
Retaining Strap

123191463
3900061-8000.05: RNCC: 2 | RNVC: 2

11 Sep 1989

5340-12-326-6606
Mounting Plate

123266606
7820349954: RNCC: 3 | RNVC: 2
78203 49954: RNCC: 5 | RNVC: 9

18 Oct 1991

5340-12-369-4029
Runner

123694029
3035876: RNCC: 3 | RNVC: 2
3035.876: RNCC: 5 | RNVC: 2

29 Jun 2006

5340-12-360-3793
Mounting Plate

123603793
54.1094.705.01: RNCC: 3 | RNVC: 2

15 May 2003

5340-12-348-0884
Webbing Strap

123480884
52.3106.000.04: RNCC: 3 | RNVC: 2

13 Apr 1999

5340-12-320-8811
Access Cover

123208811
335907-8039.000: RNCC: 2 | RNVC: 2
335907-8039.000: RNCC: 3 | RNVC: 2
335907-8039.000: RNCC: 3 | RNVC: 2
335907-8039.000: RNCC: 5 | RNVC: 9

1 Mar 1990

5340-12-349-9511
Retaining Strap

123499511
6646863: RNCC: 3 | RNVC: 2
W700943 S300: RNCC: 5 | RNVC: 2

28 Jan 2000

5340-12-198-5026
Retaining Strap

121985026
160-744969: RNCC: 3 | RNVC: 2
160-744969: RNCC: 5 | RNVC: 9

2 Feb 1984

5340-12-356-4559
Manual Control Lever

123564559
990850: RNCC: 3 | RNVC: 2

1 Mar 2002

5340-12-162-4532
Casement Fastener

121624532
00326662.00: RNCC: 3 | RNVC: 2
KT032-6662: RNCC: 3 | RNVC: 2
0032.6662.00: RNCC: 5 | RNVC: 2
KAF20313: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-319-8419
Elastic Strap

123198419
4900288-271820.00: RNCC: 2 | RNVC: 2
4312 711 32040: RNCC: 3 | RNVC: 2

9 Nov 1989

5340-12-319-6481
Mounting Bracket

123196481
42052439: RNCC: 3 | RNVC: 2
42052439KD5049-04: RNCC: 5 | RNVC: 2

20 Oct 1989

5340-12-179-1302
Plain Solid Disk

121791302
2300061-151217.002: RNCC: 2 | RNVC: 2
2300061-151217.002: RNCC: 3 | RNVC: 2
2300061-151217-002: RNCC: 5 | RNVC: 9
2300061-151217.002: RNCC: 5 | RNVC: 9

8 Jun 1979

5340-12-389-5358
Mending Plate

123895358
J04530642-001: RNCC: 3 | RNVC: 2

18 Jul 2012

5340-12-702-4975
Mounting Plate

127024975
VG95211-ML-127024975: RNCC: 2 | RNVC: 2
5.51.5811.0201.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-359-4359
Loop Clamp

123594359
DIN3016-1-D1-36X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-322-2569
Helical Compression Spring Retainer

123222569
1607-13: RNCC: 3 | RNVC: 2

6 Aug 1990

5340-12-386-7392
Access Cover

123867392
AFG077163-01: RNCC: 3 | RNVC: 2

27 Sep 2011

5340-12-355-2178
Swivel Caster

123552178
L-P 263R: RNCC: 3 | RNVC: 2
SM 362: RNCC: 5 | RNVC: 2

23 Oct 2001

5340-12-319-5030
Mending Plate

123195030
4900059-748110.004.0: RNCC: 3 | RNVC: 2
1227109: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-179-7759
Webbing Strap

121797759
4258600494: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-179-6250
Support Hook

121796250
811823485A: RNCC: 3 | RNVC: 2
431823485C: RNCC: 5 | RNVC: 2

13 Jul 1979

5340-12-300-6656
Mending Plate

123006656
3816400311: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-344-1806
Door Closer Dog

123441806
1H0837237D: RNCC: 3 | RNVC: 9

23 Sep 1997

5340-12-358-9701
Mounting Bracket

123589701
3816202868: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-319-6579
Access Cover

123196579
5394101: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-12-340-7555
Strap Fastener Loop

123407555
3553 B: RNCC: 3 | RNVC: 2
GSV 3553 B: RNCC: 5 | RNVC: 2
3553B: RNCC: 5 | RNVC: 2

5 Jun 1996

5340-12-194-5603
Schlauc Aufhaenger

121945603
23176-262123.00.0: RNCC: 2 | RNVC: 2
23176-262123.00.0: RNCC: 3 | RNVC: 2
23176-262123.00.0: RNCC: 5 | RNVC: 9

15 Nov 1982

5340-12-145-1345
Webbing Strap

121451345
C7101-15-12-30: RNCC: 3 | RNVC: 2
161202303: RNCC: 5 | RNVC: 2
C7101-15-12-30: RNCC: 5 | RNVC: 9
7101-15-12-30: RNCC: 5 | RNVC: 9
7101-15-12-30: RNCC: 5 | RNVC: 9
7101-15-12.30: RNCC: 5 | RNVC: 9
7101-15-12.30: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-342-0746
Angle Bracket

123420746
2300388-188230.001: RNCC: 2 | RNVC: 2
2300388-188230.001: RNCC: 5 | RNVC: 2
2300388-188230.001: RNCC: 5 | RNVC: 9
9909731: RNCC: 5 | RNVC: 9

6 Dec 1996

5340-12-177-9922
Electrical-Mechanical Equipment Post

121779922
VG95148A6XM2,5X9-AL: RNCC: 2 | RNVC: 2
VG95148A6XM2,5X9-AL: RNCC: 3 | RNVC: 2
4704115: RNCC: 3 | RNVC: 2
5801605-100000-007: RNCC: 5 | RNVC: 9
5801605-100000.007: RNCC: 5 | RNVC: 9

13 Mar 1979

5340-12-307-5911
Electrical-Mechanical Equipment Post

123075911
5801392-1011.015: RNCC: 3 | RNVC: 2
5801392-1011-015: RNCC: 5 | RNVC: 2

4 Jul 1986

5340-12-197-2401
Retaining Strap

121972401
111537: RNCC: 3 | RNVC: 2
PG29-37MMN500: RNCC: 5 | RNVC: 2

4 Oct 1983

5340-12-359-9017
Retaining Strap

123599017
J28230191-401: RNCC: 3 | RNVC: 2

19 Mar 2003

5340-12-195-3967
Flush Lock

121953967
235.91.728: RNCC: 3 | RNVC: 2
235-91-728: RNCC: 5 | RNVC: 2

21 Feb 1983

5340-12-319-2063
Mounting Bracket

123192063
4900064-412811: RNCC: 3 | RNVC: 2

13 Sep 1989

5340-12-199-5458
Nonmetallic Bumper

121995458
2500057-500000.06: RNCC: 2 | RNVC: 2
2500057-500000.06: RNCC: 3 | RNVC: 2
2500057-500000.06: RNCC: 3 | RNVC: 2
2500057-500000.06: RNCC: 3 | RNVC: 2
PLATTE 370X45X3 MIT ABSCHNITT-CR: RNCC: 5 | RNVC: 2
2500057-500000-06: RNCC: 5 | RNVC: 9

10 May 1984

5340-12-383-5158
Retaining Strap

123835158
SMJ 234-001-125-310: RNCC: 3 | RNVC: 2
SMJ234-001-125-310: RNCC: 5 | RNVC: 2

2 Nov 2010

5340-12-390-7863
Dust And Moisture Seal Protective Cover

123907863
F1.4553-30-01-20.00-05: RNCC: 3 | RNVC: 2

12 Dec 2012

5340-12-165-3306
Nonmetallic Bumper

121653306
9GP099036-01: RNCC: 3 | RNVC: 2
099036-01: RNCC: 5 | RNVC: 2

9 Apr 1976

5340-12-369-2591
Angle Bracket

123692591
D0065928-002: RNCC: 3 | RNVC: 2

12 Jun 2006

5340-12-176-2794
Webbing Strap

121762794
23290-151090: RNCC: 2 | RNVC: 2
23290-151090: RNCC: 3 | RNVC: 2
23290-151090: RNCC: 5 | RNVC: 2
23290-151090: RNCC: 5 | RNVC: 9
23290-151090: RNCC: 5 | RNVC: 9
000-H1-25X2,5X400X50-BW-RAL6031: RNCC: 6 | RNVC: 9

23 Nov 1978

5340-12-155-7452
Resilient Mount

121557452
80707801: RNCC: 3 | RNVC: 2
320-511-B-00.00: RNCC: 3 | RNVC: 2
320-511-B-00.00: RNCC: 5 | RNVC: 2
845.320-511B00-00: RNCC: 5 | RNVC: 2
320-511B00-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-330-7933
Nonmetallic Bumper

123307933
467-421/5342-02-18-00: RNCC: 3 | RNVC: 2
9153420095: RNCC: 3 | RNVC: 2
467-421/5342-02-18-00: RNCC: 5 | RNVC: 2

10 Feb 1993

5340-12-306-0787
Angle Bracket

123060787
P-244548-755: RNCC: 3 | RNVC: 2
P244548-755: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-701-1551
Mounting Bracket

127011551
VG95211-ML-127011551: RNCC: 2 | RNVC: 2
5.12.0220.1803.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-389-2074
Mortise Lock

123892074
110232: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-12-134-2829

5340-12-305-2146
Schiebe Aufhaenger

5340-12-183-8321
Mounting Bracket

121838321
00584-10201-00-007: RNCC: 3 | RNVC: 2

24 May 1980

5340-12-304-5213
Double Angle Bracket

123045213
5801648-15220.02: RNCC: 2 | RNVC: 2
5801648-15220.02: RNCC: 3 | RNVC: 2
5801648-15220.02: RNCC: 5 | RNVC: 9

26 Jul 1985

5340-12-324-6321
Webbing Strap

123246321
79017/026-0650-0350: RNCC: 3 | RNVC: 2
79017/026-650-330: RNCC: 3 | RNVC: 2
79017/026-0650-0350: RNCC: 5 | RNVC: 9
79017/026-650-330: RNCC: 5 | RNVC: 9

8 Mar 1991

5340-12-197-0778
Loop Clamp

121970778
DIN71555-42,3-PHOSPHATIERT: RNCC: 2 | RNVC: 2
DIN71555-42,3-PHOSPHATIERT: RNCC: 3 | RNVC: 2
42,3/71555PH: RNCC: 3 | RNVC: 2
071555042300: RNCC: 5 | RNVC: 2
5500200042: RNCC: 5 | RNVC: 2

15 Sep 1983

5340-12-351-4011
Headless Straight Rod

123514011
10063-730000.05: RNCC: 3 | RNVC: 2
10063-730000.05: RNCC: 5 | RNVC: 9

24 Jul 2000

5340-12-351-0391
Double Angle Bracket

123510391
T672M1035208: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-372-0580
Mounting Bracket

123720580
15004035: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-12-366-9739
Mounting Bracket

123669739
2300421-330027.000: RNCC: 2 | RNVC: 2
2300421-330027.000: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-313-0524
Catch Strike

123130524
100000564: RNCC: 2 | RNVC: 2
10 0000 564: RNCC: 3 | RNVC: 2
100000564: RNCC: 3 | RNVC: 2

1 Mar 1988

5340-12-300-2340

5340-12-181-4649
Platte

121814649
CF446259: RNCC: 3 | RNVC: 2
CF 446 259: RNCC: 5 | RNVC: 2
CF446259: RNCC: 5 | RNVC: 2
CF 446 259: RNCC: 5 | RNVC: 2
CF446259: RNCC: 5 | RNVC: 2
CF 446 259: RNCC: 5 | RNVC: 2

26 Nov 1979

5340-12-379-5143
Angle Bracket

123795143
0004707: RNCC: 3 | RNVC: 2

3 Aug 2009

5340-12-301-2720
Helical Compression Spring Seat

123012720
401342-443.20.02.01: RNCC: 3 | RNVC: 2

2 Oct 1984

5340-12-305-5622
Retaining Strap

123055622
336153: RNCC: 3 | RNVC: 2

22 Nov 1985

Load More Results