What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 15 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 15 of 178

5340-12-184-8602
Resilient Mount

121848602
DIN95363-E20X20-M5X12-NR80ST: RNCC: 2 | RNVC: 2
515006-M5X12.NR80.ST: RNCC: 5 | RNVC: 2
070496: RNCC: 5 | RNVC: 2
BN 07 04 96: RNCC: 5 | RNVC: 2
VG95363-E20X20-M5X12-NR80ST: RNCC: 5 | RNVC: 9

23 Aug 1980

5340-12-182-1497
Angle Bracket

121821497
5800823-041-003: RNCC: 3 | RNVC: 2
5800823-041.003: RNCC: 5 | RNVC: 2
5800823-041-003: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-313-8399
Resilient Mount

123138399
135/2544-02-10-00: RNCC: 3 | RNVC: 2
845.135/2544-02-10-00.AL: RNCC: 3 | RNVC: 2
135-2544-02-10-00: RNCC: 5 | RNVC: 2

11 May 1988

5340-12-701-3958
Loop Clamp

127013958
VG95211-ML-127013958: RNCC: 2 | RNVC: 2
5.12.5311.2720.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-344-9053
Mounting Bracket

123449053
58R137-13141-2: RNCC: 2 | RNVC: 2
58R137-13141-2: RNCC: 3 | RNVC: 2

9 Jan 1998

5340-12-177-4127
Angle Bracket

121774127
2300002-181051.001: RNCC: 2 | RNVC: 2
2300002-181051.001: RNCC: 3 | RNVC: 2
2300002-181051.001: RNCC: 5 | RNVC: 9
2300002-181051-001: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-303-2744
Access Cover

123032744
P-886701-403: RNCC: 3 | RNVC: 2
P886701-403: RNCC: 5 | RNVC: 2

13 Mar 1985

5340-12-386-1904
Runner

123861904
2500262-194110.000.0: RNCC: 3 | RNVC: 2

15 Aug 2011

5340-12-337-1615
Angle Bracket

123371615
2382-069651.01.0: RNCC: 2 | RNVC: 2
2382-069651.01.0: RNCC: 3 | RNVC: 2
1804375: RNCC: 5 | RNVC: 2

26 Jan 1995

5340-12-700-8933
Mechanical Stop

127008933
VG95211-ML-127008933: RNCC: 2 | RNVC: 2
2.06.7210.8991.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-194-0383
Nonmetallic Bumper

121940383
2300126-100000.001.0: RNCC: 2 | RNVC: 2
837.2300126-100000.001.0: RNCC: 3 | RNVC: 2
307692: RNCC: 3 | RNVC: 2
2300126-100000.001.0: RNCC: 5 | RNVC: 2
2300126-100000.001.0: RNCC: 5 | RNVC: 2
093.04.0073: RNCC: 5 | RNVC: 2
2300126-100000.001.0: RNCC: 5 | RNVC: 9

27 Sep 1982

5340-12-171-1993
Detent Plunger

121711993
306-020-70-121: RNCC: 3 | RNVC: 2
618255: RNCC: 5 | RNVC: 2
81.91020-0427: RNCC: 5 | RNVC: 2
81910200427: RNCC: 5 | RNVC: 2
23251-200651-001-0: RNCC: 5 | RNVC: 9
23251-200651.001.0: RNCC: 5 | RNVC: 9

16 Sep 1977

5340-12-189-6130
Butt Hinge

121896130
5801433-020150.00.0: RNCC: 3 | RNVC: 2
5801433-020150-00-0: RNCC: 5 | RNVC: 2
5801433-020150.00.0: RNCC: 5 | RNVC: 9

8 Oct 1981

5340-12-316-0685
Mounting Bracket

123160685
2500179-198510.000.0: RNCC: 2 | RNVC: 2
2500179-198510.000.0: RNCC: 3 | RNVC: 2

20 Dec 1988

5340-12-393-7632
Webbing Strap

123937632
SK1409-003020.000.0: RNCC: 3 | RNVC: 2
7136371: RNCC: 5 | RNVC: 2

9 Oct 2013

5340-12-701-7156
Angle Bracket

127017156
VG95211-ML-127017156: RNCC: 2 | RNVC: 2
5.12.7601.4180.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-4921
Mounting Bracket

127014921
VG95211-ML-127014921: RNCC: 2 | RNVC: 2
5.12.5850.0120.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-164-9132
Dust And Moisture Seal Protective Cap

121649132
30-79501-0050: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-702-5105
Rod End Clevis

127025105
VG95211-ML-127025105: RNCC: 2 | RNVC: 2
5.51.6501.1162.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-312-7817
Double Angle Bracket

123127817
P-296814-437: RNCC: 3 | RNVC: 2
P296814-437: RNCC: 5 | RNVC: 2

4 Feb 1988

5340-12-374-8848
Angle Bracket

123748848
SK976-182300.013.0: RNCC: 3 | RNVC: 2
1306612: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-12-177-1653
Detent Plunger

121771653
4062640574: RNCC: 3 | RNVC: 2
4062640574: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-322-3529
Lock-Release Lever

123223529
600E658: RNCC: 3 | RNVC: 2
9000 2575: RNCC: 5 | RNVC: 2

14 Aug 1990

5340-12-322-2698
Loop Clamp

123222698
1248100: RNCC: 3 | RNVC: 2
1248100: RNCC: 5 | RNVC: 2

7 Aug 1990

5340-12-365-1557
Dust And Moisture Seal Protective Cap

123651557
SK12S: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-127-5064
Retaining Strap

121275064
3049951520: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-307-2358
Pipe Bracket

123072358
411 624: RNCC: 3 | RNVC: 2
14.1800.003.12: RNCC: 5 | RNVC: 2

23 May 1986

5340-12-345-7954
Access Cover

123457954
TA3014P004: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-12-313-1733
Butt Hinge

123131733
00532674: RNCC: 3 | RNVC: 2
00532674: RNCC: 5 | RNVC: 2

9 Mar 1988

5340-12-145-0913
Retaining Strap

121450913
1201 8592: RNCC: 3 | RNVC: 2
12018592: RNCC: 5 | RNVC: 2
A26.13020/6.4: RNCC: 5 | RNVC: 2
A26-13020-6-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-377-8594
Mounting Plate

123778594
5070000-000020.001.0: RNCC: 3 | RNVC: 2

17 Feb 2009

5340-12-313-3382
Access Cover

123133382
2300194-181540.000: RNCC: 3 | RNVC: 2
9843612: RNCC: 5 | RNVC: 9
2300194-181540.000: RNCC: 5 | RNVC: 9
2300194-181540.000: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-195-4730
Retaining Strap

121954730
23111-2405-83: RNCC: 3 | RNVC: 2
23111-2405-83: RNCC: 5 | RNVC: 9
23111-2405.83: RNCC: 5 | RNVC: 9
23111-2405-83: RNCC: 5 | RNVC: 9
23111-2405.83: RNCC: 5 | RNVC: 9

2 Mar 1983

5340-12-701-3039
Rod End Connector

127013039
VG95211-ML-127013039: RNCC: 2 | RNVC: 2
5.12.5101.6130.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2980
Rod End Connector

127012980
VG95211-ML-127012980: RNCC: 2 | RNVC: 2
5.12.5101.4780.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-318-0993
Retaining Strap

123180993
140-251210-904-0: RNCC: 3 | RNVC: 2
62773-500: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-356-7521
Double Angle Bracket

123567521
SK658-100600.000.0: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-329-3768
Nonmetallic Bumper

123293768
05.113.96.06.0: RNCC: 3 | RNVC: 2
E-05.113.96.06.0: RNCC: 5 | RNVC: 2

14 Aug 1992

5340-12-358-1632
Helical Compression Spring Retainer

123581632
4055R-310417.000.0: RNCC: 2 | RNVC: 2
4055R-310417.000.0: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-12-356-3676
Angle Bracket

123563676
2500262-000000.029.0: RNCC: 2 | RNVC: 2
2500262-000000.029.0: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-702-5308
Angle Bracket

127025308
VG95211-ML-127025308: RNCC: 2 | RNVC: 2
5.51.7040.0040.07: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-347-2137
Double Angle Bracket

123472137
8-4232.02: RNCC: 2 | RNVC: 2
9812210: RNCC: 3 | RNVC: 2
8-4232.02: RNCC: 5 | RNVC: 2
9812210: RNCC: 5 | RNVC: 9
8-4232.02: RNCC: 5 | RNVC: 9

12 Nov 1998

5340-12-302-2567
Retaining Band

123022567
6214900042: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-377-4042
Mounting Bracket

123774042
8605059.1.104.00: RNCC: 3 | RNVC: 2

14 Jan 2009

5340-12-361-4134
Mounting Bracket

123614134
2500262-765010.000.0: RNCC: 2 | RNVC: 2
2500262-765010.000.0: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-12-302-5462
Angle Bracket

123025462
1423-910.50(3): RNCC: 3 | RNVC: 2

11 Jan 1985

5340-12-366-4970
Double Angle Bracket

123664970
2 0072-894: RNCC: 3 | RNVC: 2
2 0072-894: RNCC: 5 | RNVC: 2

29 Apr 2005

5340-12-322-5065
Hook Handle

123225065
076-122900-902-0: RNCC: 2 | RNVC: 2
076-122900-902-0: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-172-7292
Casement Fastener

121727292
2125760: RNCC: 3 | RNVC: 2
2-487914: RNCC: 5 | RNVC: 2
2.487914: RNCC: 5 | RNVC: 2

14 Feb 1978

5340-12-176-1318
Handle Grip

121761318
CF 413 612 AR: RNCC: 2 | RNVC: 2
CF413612AR: RNCC: 3 | RNVC: 2
CF 413 612 AR: RNCC: 5 | RNVC: 2
CF413612AR: RNCC: 5 | RNVC: 2
CF 413 612 AR: RNCC: 5 | RNVC: 2
CF 413 612 AR: RNCC: 5 | RNVC: 2

9 Nov 1978

5340-12-353-7644
Dust And Moisture Seal Protective Plug

123537644
08001071: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-183-1182
Pipe Hanger Extension Bar

121831182
0288 8329: RNCC: 3 | RNVC: 2
2888329EE0693-79: RNCC: 5 | RNVC: 2
2888329: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-194-4145
Access Cover

121944145
66.3505.332.00-A001: RNCC: 3 | RNVC: 2
582714: RNCC: 5 | RNVC: 2

3 Nov 1982

5340-12-340-7080
Angle Bracket

123407080
105-91521.05: RNCC: 3 | RNVC: 2

29 May 1996

5340-12-125-2820

5340-12-346-4967
Mounting Bracket

123464967
2300348-184313.000.0: RNCC: 2 | RNVC: 2
2300348-184313.000.0: RNCC: 3 | RNVC: 2
1570018: RNCC: 5 | RNVC: 2

31 Jul 1998

5340-12-169-2033
Mending Plate

121692033
CF 409 739 B: RNCC: 2 | RNVC: 2
CF 409 739 B: RNCC: 3 | RNVC: 2
CF 409 739 B: RNCC: 5 | RNVC: 2
CF409739A: RNCC: 5 | RNVC: 9
CF 409 739 A: RNCC: 5 | RNVC: 9
CF409739A: RNCC: 5 | RNVC: 9
CF 409 739 A: RNCC: 5 | RNVC: 9
CF409739A: RNCC: 5 | RNVC: 9
CF 409 739 A: RNCC: 5 | RNVC: 9

22 Apr 1977

5340-12-381-7859
Sliding Block

123817859
1.324.FM8: RNCC: 3 | RNVC: 2
1.32.4FM8: RNCC: 5 | RNVC: 2

31 Mar 2010

5340-12-311-7224
Spring Tension Clip

123117224
394.700.011: RNCC: 3 | RNVC: 2
493 A 900.011: RNCC: 3 | RNVC: 2
378.32503: RNCC: 3 | RNVC: 2
394.700.011: RNCC: 5 | RNVC: 2

9 Oct 1987

5340-12-343-0962
Manual Control Lever

123430962
5080-213: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-157-1769
Resilient Mount

121571769
1200011009: RNCC: 3 | RNVC: 2
HERMA,455TG,OELSCHUTZ,H26: RNCC: 5 | RNVC: 2
352250015783: RNCC: 5 | RNVC: 2
VBE424-53: RNCC: 5 | RNVC: 2
H26AUSFTG0ELSCHUTZANSTRICH: RNCC: 5 | RNVC: 9
HERMA455H26TG: RNCC: 5 | RNVC: 9
HERMAHPTG4550ELSCHUTZANSTRICH: RNCC: 5 | RNVC: 9
H26-455AUSFTG0ELSCHUTZANSTRICH: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-363-5034
Cushioning Pad

123635034
J0423728H521-000A0-010: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-325-7818
Mounting Plate

123257818
M-28-009-04.0/06: RNCC: 3 | RNVC: 2

9 Jul 1991

5340-12-304-7962
Helical Compression Spring Seat

123047962
BSK366-22: RNCC: 3 | RNVC: 2

26 Aug 1985

5340-12-700-4218
Dust And Moisture Seal Protective Cap

127004218
51-086352094: RNCC: 2 | RNVC: 2
SB/2SCH5: RNCC: 3 | RNVC: 2

7 May 1992

5340-12-129-5762
Quick Release Plunger

121295762
4061014: RNCC: 3 | RNVC: 2
R18361: RNCC: 3 | RNVC: 2
4061-014: RNCC: 5 | RNVC: 2
42094-051-17: RNCC: 5 | RNVC: 9
R18361: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-384-5725
Manual Control Lever

123845725
F1.1189-30-10-10.25-00: RNCC: 3 | RNVC: 2

9 Mar 2011

5340-12-302-0004
Angle Bracket

123020004
535003-0110: RNCC: 3 | RNVC: 2
535003-0110: RNCC: 5 | RNVC: 9
535003-0110-000: RNCC: 5 | RNVC: 9
120003-1015.10: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-12-341-2001
Protection Bellows

123412001
2300211-208211.015.0: RNCC: 2 | RNVC: 2
2300211-208211.015.0: RNCC: 3 | RNVC: 2
9857533: RNCC: 5 | RNVC: 2
9857533: RNCC: 5 | RNVC: 9

8 Aug 1996

5340-12-300-8841
Mending Plate

123008841
M1423 8414: RNCC: 3 | RNVC: 2
TK-BA35-5340-358: RNCC: 5 | RNVC: 2
1423-849.14(4): RNCC: 5 | RNVC: 9

7 Sep 1984

5340-12-311-3949
Mending Plate

123113949
A-243803-413: RNCC: 3 | RNVC: 2
A243803-413: RNCC: 5 | RNVC: 2

27 Aug 1987

5340-12-311-5484
Angle Bracket

123115484
P-086452-405: RNCC: 3 | RNVC: 2
P086452-405: RNCC: 5 | RNVC: 2

16 Sep 1987

5340-12-328-9135
Loop Clamp

123289135
DIN3015-L-KP-2-G-15-PP: RNCC: 2 | RNVC: 2
RAPG-215: RNCC: 3 | RNVC: 2
215PPH: RNCC: 3 | RNVC: 2
602008177: RNCC: 5 | RNVC: 2
6-476-0547: RNCC: 5 | RNVC: 2
RAPG-215: RNCC: 5 | RNVC: 2
215PPG: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-344-4615
Mounting Bracket

123444615
A-244810-012: RNCC: 3 | RNVC: 2
A244810-012: RNCC: 5 | RNVC: 2

29 Oct 1997

5340-12-352-2733
Retaining Strap

123522733
2500238-060100.007.0: RNCC: 2 | RNVC: 2
2500238-060100.007.0: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-12-188-6659
Pad Eye

121886659
2300109-288210.004.0: RNCC: 2 | RNVC: 2
2300109-288210.004.0: RNCC: 3 | RNVC: 2
2300109-288210.004.0: RNCC: 3 | RNVC: 2
2300109-288210-004-0: RNCC: 5 | RNVC: 2
2300109-288210-004-0: RNCC: 5 | RNVC: 2
2300109-288210-004-0: RNCC: 5 | RNVC: 9
2300109-288210.004.0: RNCC: 5 | RNVC: 9

23 Jul 1981

5340-12-188-0417
Retaining Strap

121880417
DIN3016-1-F2-16-34X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-F2-16-34X15-W1-2: RNCC: 3 | RNVC: 2
RSGU2.16-34/15: RNCC: 3 | RNVC: 2
4229010016: RNCC: 5 | RNVC: 2
RSGU1200-16-34-15: RNCC: 5 | RNVC: 2
RSGU1200.16-34/15: RNCC: 5 | RNVC: 2
DIN3016-F2-16-34X15-W1-2: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-177-5166
Spring Tension Clip

121775166
2300002-151155.002: RNCC: 2 | RNVC: 2
2300002-151155.002: RNCC: 3 | RNVC: 2
2300002-151155-002: RNCC: 5 | RNVC: 9
2300002-151155.002: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-167-0761
Resilient Mount

121670761
2300002-014110.000: RNCC: 2 | RNVC: 2
2300002-014110.000: RNCC: 3 | RNVC: 2
2300002-014110: RNCC: 5 | RNVC: 2
2300002-014110: RNCC: 5 | RNVC: 9
2300002-014110: RNCC: 5 | RNVC: 9
2300002-014110: RNCC: 5 | RNVC: 9

17 Nov 1976

5340-12-301-8857
Mounting Bracket

123018857
2300002-181032.025: RNCC: 2 | RNVC: 2
2300002-181032.025: RNCC: 3 | RNVC: 2
2300002-181032-025: RNCC: 5 | RNVC: 9
2300002-181032.025: RNCC: 5 | RNVC: 9

15 Nov 1984

5340-12-355-7437
Mounting Bracket

123557437
P-876336-401: RNCC: 3 | RNVC: 2
P876336-401: RNCC: 5 | RNVC: 2

12 Dec 2001

5340-12-347-8576
Mounting Bracket

123478576
5803514-215110.00: RNCC: 2 | RNVC: 2
55.0205.633.00: RNCC: 3 | RNVC: 2
5803514-215110.00: RNCC: 5 | RNVC: 9

24 Feb 1999

5340-12-333-5120
Webbing Strap

123335120
6.1981-02: RNCC: 3 | RNVC: 2

28 Dec 1993

5340-12-700-8694
Loop Clamp

127008694
VG95211-ML-127008694: RNCC: 2 | RNVC: 2
155N464-5: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-3360
Mounting Bracket

127013360
VG95211-ML-127013360: RNCC: 2 | RNVC: 2
5.12.5111.0230.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-315-6876
Retaining Strap

123156876
4139 306 284: RNCC: 3 | RNVC: 2
4139306284: RNCC: 3 | RNVC: 2
(241)A39630-120818: RNCC: 5 | RNVC: 2
(241)A396300120818: RNCC: 5 | RNVC: 2
00120818: RNCC: 5 | RNVC: 2
4139 306 284: RNCC: 5 | RNVC: 2
100CP3266: RNCC: 5 | RNVC: 2
4139-306-284: RNCC: 5 | RNVC: 9

19 Nov 1988

5340-12-348-4162
Mounting Bracket

123484162
10 0065 300: RNCC: 3 | RNVC: 2
10-0065-300: RNCC: 5 | RNVC: 2
100065300: RNCC: 5 | RNVC: 9

16 Jun 1999

5340-12-191-8986
Metal Runner

121918986
C324-A19-C113: RNCC: 3 | RNVC: 2
C324A19C113: RNCC: 5 | RNVC: 2

16 Mar 1982

5340-12-042-1768

5340-12-172-7575
Angle Bracket

121727575
23290-223002.002: RNCC: 2 | RNVC: 2
23290-223002-002: RNCC: 5 | RNVC: 2
23290-223002-002: RNCC: 5 | RNVC: 9

20 Feb 1978

5340-12-385-4141
Strap Fastener Loop

123854141
SK976-004010.000.0: RNCC: 3 | RNVC: 2

31 May 2011

5340-12-332-4929
Handwheel

123324929
VG85082-H-80X9: RNCC: 2 | RNVC: 2
02-01-010-15-01-B: RNCC: 5 | RNVC: 2
02-01-010-15-01B: RNCC: 5 | RNVC: 2

17 Aug 1993

5340-12-320-4725
Retaining Strap

123204725
00462-012-000: RNCC: 3 | RNVC: 2
462-12: RNCC: 5 | RNVC: 9

18 Jan 1990

5340-12-197-6748
Mending Plate

121976748
P-296879-404: RNCC: 3 | RNVC: 2
P296879-404: RNCC: 5 | RNVC: 2

14 Nov 1983

5340-12-194-5026
Double Angle Bracket

121945026
A-616782-403: RNCC: 3 | RNVC: 2
A616782-403: RNCC: 5 | RNVC: 2

10 Nov 1982

5340-12-701-2161
Mounting Bracket

127012161
VG95211-ML-127012161: RNCC: 2 | RNVC: 2
5.12.0605.0530.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-198-4141
Angle Bracket

121984141
4900075-2310.00: RNCC: 2 | RNVC: 2
4900075-2310.00: RNCC: 3 | RNVC: 2
556-8202310.00: RNCC: 3 | RNVC: 2
C 7000 114: RNCC: 5 | RNVC: 2
C7000114: RNCC: 5 | RNVC: 2
4900075-2310.00: RNCC: 5 | RNVC: 2
556-8202310-000: RNCC: 5 | RNVC: 2
C 7000 114: RNCC: 5 | RNVC: 2
C7000114: RNCC: 5 | RNVC: 2
4900075-2310-00: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-308-9923
Angle Bracket

123089923
P-245251-766: RNCC: 3 | RNVC: 2
P245251-766: RNCC: 5 | RNVC: 2

4 Dec 1986

5340-12-193-3676
Support Hook

121933676
5800151-12.03: RNCC: 2 | RNVC: 2
5800151-12.03: RNCC: 3 | RNVC: 2
5800151-12.03: RNCC: 3 | RNVC: 2
5800151-12.03: RNCC: 5 | RNVC: 9

14 Jul 1982

5340-12-185-3106
Retaining Strap

121853106
DIN3016-1F1-18X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU2.18/15: RNCC: 3 | RNVC: 2
DIN3016-F1-18X15-W1-2: RNCC: 3 | RNVC: 2
9420015018: RNCC: 5 | RNVC: 2
RSGU1200-18-15: RNCC: 5 | RNVC: 2
RSGU1200.18/15: RNCC: 5 | RNVC: 2
DIN3016-F1-18X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-F18X15-W1: RNCC: 5 | RNVC: 9
VG95931F18X15W1: RNCC: 5 | RNVC: 9

25 Sep 1980

5340-12-339-4107
Retaining Strap

123394107
4931-0002-400000: RNCC: 3 | RNVC: 2

21 Nov 1995

5340-12-308-9499
Loop Clamp

123089499
DIN3015-Z-A-1R-6-10-PP-W1: RNCC: 2 | RNVC: 2
HRZ1A6-10PP-STMBL: RNCC: 3 | RNVC: 2
RBPR1-110/6: RNCC: 3 | RNVC: 2
SP110/06PP-GD-AS: RNCC: 3 | RNVC: 2
RBP1-110/6: RNCC: 5 | RNVC: 2
DIN3015-ZA1R-6-10PP-W1: RNCC: 5 | RNVC: 2
SP110/06PP-GD-AS: RNCC: 5 | RNVC: 2
RBPR1-110/6: RNCC: 5 | RNVC: 2
RBP1-110/6: RNCC: 5 | RNVC: 2
VG95961A1-6-10-PP-W1: RNCC: 5 | RNVC: 9

1 Dec 1986

5340-12-374-8585
Double Angle Bracket

123748585
253 8139-001: RNCC: 3 | RNVC: 2
253 8139-001: RNCC: 5 | RNVC: 2

1 Apr 2008

5340-12-174-4693
Loop Clamp

121744693
DIN3016-1-D2-17-18X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-17-18X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.17-18/15: RNCC: 3 | RNVC: 2
4219101017: RNCC: 5 | RNVC: 2
RSGU1100-17-18-15: RNCC: 5 | RNVC: 2
RSGU1100.17-18/15: RNCC: 5 | RNVC: 2
DIN3016-D2-17-18X15-W1-2: RNCC: 5 | RNVC: 9

3 Jul 1978

5340-12-333-7271
Pipe Hanger

123337271
1816025117: RNCC: 3 | RNVC: 2
SPGU6025.117/30SK: RNCC: 5 | RNVC: 2
SPGU6025.117/30SK-W1: RNCC: 5 | RNVC: 2
01816025117: RNCC: 5 | RNVC: 2

28 Jan 1994

5340-12-314-4570
Angle Bracket

123144570
7883217: RNCC: 3 | RNVC: 2
1000025-573900: RNCC: 5 | RNVC: 2
7883-217: RNCC: 5 | RNVC: 2
1000025-573900: RNCC: 5 | RNVC: 9

8 Jul 1988

5340-12-376-9802
Dust And Moisture Seal Protective Cap

123769802
600-011: RNCC: 3 | RNVC: 2

1 Dec 2008

5340-12-702-9390
Pawl Fastener

127029390
VG95211-ML-127029390: RNCC: 2 | RNVC: 2
AEK-33: RNCC: 3 | RNVC: 2
0500891994899: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-158-7130
Retaining Strap

121587130
23305-262291.00.0: RNCC: 2 | RNVC: 2
23305-262291-00-0: RNCC: 5 | RNVC: 2
23305-262291-00-0: RNCC: 5 | RNVC: 9
23305-262291.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-9642
Dust And Moisture Seal Protective Cap

123189642
250/8: RNCC: 3 | RNVC: 2
GPN250/8: RNCC: 5 | RNVC: 2

28 Aug 1989

5340-12-173-8537
Loop Clamp

121738537
PAN4231CBBD5420: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-353-4565
Access Cover

123534565
49540: RNCC: 3 | RNVC: 2
37.00406: RNCC: 5 | RNVC: 2

27 Mar 2001

5340-12-343-4334
Mounting Bracket

123434334
053115417: RNCC: 3 | RNVC: 2
F300 0T 023 1150: RNCC: 6 | RNVC: 9

19 Jun 1997

5340-12-332-8255
Mounting Bracket

123328255
81669125135: RNCC: 2 | RNVC: 2
81669125135: RNCC: 3 | RNVC: 2
81.66912.5135: RNCC: 5 | RNVC: 2

23 Sep 1993

5340-12-316-1516
Retaining Strap

123161516
3134920641: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-343-1996
Nonmetallic Bumper

123431996
58HW41619: RNCC: 3 | RNVC: 2
5L.6661.202.01: RNCC: 5 | RNVC: 2
5L.6661.202.01: RNCC: 5 | RNVC: 2

16 May 1997

5340-12-376-9100
Retaining Strap

123769100
160.31.0080: RNCC: 3 | RNVC: 2
300.062.307: RNCC: 5 | RNVC: 2

21 Nov 2008

5340-12-357-3344
Mounting Bracket

123573344
8812370240: RNCC: 2 | RNVC: 2
8812370240: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-12-319-2311
Helical Compression Spring Seat

123192311
1420328051: RNCC: 3 | RNVC: 2

14 Sep 1989

5340-12-301-7178

5340-12-024-4971

5340-12-306-4625
Loop Clamp

123064625
DIN3016-1-A1-17X12-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-17X12-W1-2: RNCC: 3 | RNVC: 2
RS1.17/12: RNCC: 3 | RNVC: 2
0745252007: RNCC: 5 | RNVC: 2
4110012017: RNCC: 5 | RNVC: 2
RS1100.17/12: RNCC: 5 | RNVC: 2
6100135-0144: RNCC: 5 | RNVC: 9
DIN3016-A1-17X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-A17X12-W1: RNCC: 5 | RNVC: 9

3 Mar 1986

5340-12-701-6087
Angle Bracket

127016087
VG95211-ML-127016087: RNCC: 2 | RNVC: 2
5.12.7003.1200.09: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-319-4322
Door Button

123194322
2300232-182500.001.0: RNCC: 2 | RNVC: 2
2300232-182500.001.0: RNCC: 3 | RNVC: 2
2300232-182500.001.02: RNCC: 5 | RNVC: 9

2 Oct 1989

5340-12-306-6607
Mending Plate

123066607
704-152000-902-0: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-12-366-4465
Handwheel

123664465
1-4512-004-00-H2-A-100: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-12-194-7044
Pipe Bracket

121947044
P-295451-011: RNCC: 3 | RNVC: 2
P295451-011: RNCC: 5 | RNVC: 2

30 Nov 1982

5340-12-306-3574
Angle Bracket

123063574
A-233332-005: RNCC: 3 | RNVC: 2
A233332-005: RNCC: 5 | RNVC: 2

24 Feb 1986

5340-12-188-1063
Handwheel

121881063
7882792: RNCC: 3 | RNVC: 2
4-7882-792: RNCC: 5 | RNVC: 2
7882-792: RNCC: 5 | RNVC: 2
1000025-541950: RNCC: 5 | RNVC: 9

5 Jun 1981

5340-12-314-0418
Angle Bracket

123140418
3934291440: RNCC: 3 | RNVC: 2
393 429 14 40: RNCC: 5 | RNVC: 2

1 Jun 1988

5340-12-314-0577
Mounting Plate

123140577
8474565: RNCC: 3 | RNVC: 2
1121716: RNCC: 5 | RNVC: 2

2 Jun 1988

5340-12-322-8357
Access Cover

123228357
302140-0370.01: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-12-317-8647
Rigid Caster

123178647
1715620: RNCC: 3 | RNVC: 2
T5213-250.180: RNCC: 5 | RNVC: 2

19 May 1989

5340-12-155-5581
Retaining Strap

121555581
160-71254-03: RNCC: 3 | RNVC: 2
160-71254-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-6838
Electrical-Mechanical Equipment Post

121906838
NO PRIMARY REF 12-190-6838: RNCC: 3 | RNVC: 2
7801137066: RNCC: 5 | RNVC: 9
7801 137066: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-364-8693
Loop Clamp

123648693
SM216PP-IS: RNCC: 3 | RNVC: 2
1110001521: RNCC: 5 | RNVC: 2

10 Nov 2004

5340-12-181-6090
Clamping Catch

121816090
V951L04-1X4AA: RNCC: 3 | RNVC: 2
V51L4-1X1AA: RNCC: 5 | RNVC: 2
85-620: RNCC: 5 | RNVC: 2

10 Dec 1979

5340-12-308-0808
Retaining Strap

123080808
E4-2037880: RNCC: 2 | RNVC: 2
E4-2037880: RNCC: 3 | RNVC: 2
E4-2037880: RNCC: 5 | RNVC: 9

29 Aug 1986

5340-12-190-6839
Spring Tension Clip

121906839
NO PRIMARY REF 12-190-6839: RNCC: 3 | RNVC: 2
7562 124212: RNCC: 5 | RNVC: 9
7562124212: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-314-1167
Angle Bracket

123141167
512214-3240.000: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-12-348-9471
Mounting Plate

123489471
245/7346-41-14-00: RNCC: 3 | RNVC: 2

6 Sep 1999

5340-12-329-8706
Resilient Mount

123298706
DIN95363-A30X30-M8X23-NR55ST: RNCC: 2 | RNVC: 2
500033-M8X23.NR55.ST: RNCC: 5 | RNVC: 2
A30X30-M8X23-60SH: RNCC: 5 | RNVC: 2
VG95363-A30X30-M8X23-NR55ST: RNCC: 5 | RNVC: 9

8 Oct 1992

5340-12-149-7501
Spring Tension Clip

121497501
330108-1010.000: RNCC: 3 | RNVC: 2
1240-11000.010: RNCC: 5 | RNVC: 2
1240-11000-010: RNCC: 5 | RNVC: 9
330108-1010.000: RNCC: 5 | RNVC: 9
1240-11000-010: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-320-8093
Casement Fastener

123208093
409061795: RNCC: 3 | RNVC: 2
59001-002: RNCC: 3 | RNVC: 2
5800.6035: RNCC: 3 | RNVC: 2
G003910: RNCC: 5 | RNVC: 2
409.061795: RNCC: 5 | RNVC: 2
59 001-002: RNCC: 5 | RNVC: 9

19 Feb 1990

5340-12-185-3988
Electrical-Mechanical Equipment Post

121853988
4559649: RNCC: 3 | RNVC: 2
5801715-020000-007: RNCC: 5 | RNVC: 9
5801715-020000.007: RNCC: 5 | RNVC: 9

3 Oct 1980

5340-12-341-8361
Nonmetallic Bumper

123418361
9847308: RNCC: 3 | RNVC: 9
393-206070.008: RNCC: 5 | RNVC: 2
393-206070.008: RNCC: 5 | RNVC: 9

1 Nov 1996

5340-12-354-8353
Metal Grille

123548353
8320-0015: RNCC: 2 | RNVC: 2
8320-0015: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-306-6840
Bow Handle

123066840
VG95149A76-M3ST-CR: RNCC: 2 | RNVC: 2
20H246: RNCC: 3 | RNVC: 2

20 Mar 1986

5340-12-363-6693
Angle Bracket

123636693
J92228002-401: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-12-701-6341
Angle Bracket

127016341
VG95211-ML-127016341: RNCC: 2 | RNVC: 2
5.12.7060.1400.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-186-1323
Bail Handle

121861323
DIN3136-120X85BK: RNCC: 2 | RNVC: 2
328-120: RNCC: 3 | RNVC: 2
3603: RNCC: 3 | RNVC: 2
DIN3136-120X85-BK: RNCC: 3 | RNVC: 2
A120X85DIN3136R0H: RNCC: 5 | RNVC: 2

2 Dec 1980

5340-12-406-4541
Mounting Bracket

5340-12-328-9121
Plug Button

123289121
P-208/1: RNCC: 3 | RNVC: 2
39169: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-701-8261
Loop Clamp

127018261
VG95211-ML-127018261: RNCC: 2 | RNVC: 2
5.84.7601.1302.98: RNCC: 3 | RNVC: 2
84.7601-1302: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-316-7509
Spring Holder

123167509
1000192-02 0 40000.06: RNCC: 2 | RNVC: 2
1000192-02 0 40000.06: RNCC: 3 | RNVC: 2
1000192-02 0 40000.06: RNCC: 5 | RNVC: 9
10003-02 0 00600: RNCC: 5 | RNVC: 9

8 Feb 1989

5340-12-146-9128
Nut And Bolt Locking Plate

121469128
25704-190500.13.0: RNCC: 2 | RNVC: 2
25704-190500.13.0: RNCC: 3 | RNVC: 2
25704-190500.13.0: RNCC: 3 | RNVC: 2
25704-190500-13-0: RNCC: 5 | RNVC: 2
25704-190500.13.0: RNCC: 5 | RNVC: 9
25704-190500.13.0: RNCC: 5 | RNVC: 9
25704-190500-13-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-333-4456
Resilient Mount

123334456
DIN95363-25X30-M6X18,5-NR45ST: RNCC: 2 | RNVC: 2
0002370611: RNCC: 5 | RNVC: 2
0002370611: RNCC: 5 | RNVC: 2
510023-M6X18,5.NR45.ST: RNCC: 5 | RNVC: 2
21239/B-BSTN4590: RNCC: 5 | RNVC: 2
0002370611: RNCC: 5 | RNVC: 2
000-237-0611: RNCC: 5 | RNVC: 9
VG95363-25X30-M6X18,5-NR45ST: RNCC: 5 | RNVC: 9

16 Dec 1993

5340-12-327-5573
Rod End Connector

123275573
DIN82006-A40-M100X6X130: RNCC: 2 | RNVC: 2
DIN82006-A40-M100X6X130: RNCC: 3 | RNVC: 2
A40-M100X6X130DIN82006: RNCC: 5 | RNVC: 2
R-1-26092/3: RNCC: 5 | RNVC: 2
R-1.26092-3: RNCC: 5 | RNVC: 2

3 Feb 1992

5340-12-199-5547
Nonmetallic Bumper

121995547
2500057-500000.04: RNCC: 2 | RNVC: 2
2500057-500000.04: RNCC: 3 | RNVC: 2
2500057-500000.04: RNCC: 3 | RNVC: 2
2500057-500000.04: RNCC: 3 | RNVC: 2
PLATTE 210X75X3 MIT LOCH-CR75: RNCC: 5 | RNVC: 2
2500057-500000-04: RNCC: 5 | RNVC: 9

11 May 1984

5340-12-303-5826
Angle Bracket

123035826
P-295439-061: RNCC: 3 | RNVC: 2
P295439-061: RNCC: 5 | RNVC: 2

10 Apr 1985

5340-12-384-3631
Butt Hinge Leaf

123843631
SK1239-174000.005.0: RNCC: 3 | RNVC: 2

17 Feb 2011

5340-12-171-3329
Angle Bracket

121713329
81517100558: RNCC: 3 | RNVC: 2
23250-120614-001-0: RNCC: 5 | RNVC: 9
23250-120614.001.0: RNCC: 5 | RNVC: 9

30 Sep 1977

5340-12-305-2610
Resilient Mount

123052610
DIN95363-B40X30-M10X28-NR60ST: RNCC: 2 | RNVC: 2
5218071/11MN60: RNCC: 5 | RNVC: 2
510031-M10X28.NR60.ST: RNCC: 5 | RNVC: 2
7269042: RNCC: 5 | RNVC: 2
5218071.60: RNCC: 5 | RNVC: 2
VG95363-B40X30-M10X27,5-NR60ST: RNCC: 5 | RNVC: 9
521807115: RNCC: 5 | RNVC: 9

15 Oct 1985

5340-12-321-1302
Dust And Moisture Seal Protective Cap

123211302
2103-KK-60.00: RNCC: 3 | RNVC: 2
50267000: RNCC: 5 | RNVC: 2
2103-32-60.00: RNCC: 5 | RNVC: 9
2103-32-60-00: RNCC: 5 | RNVC: 9

30 Mar 1990

5340-12-174-7852
Expansion Plug

121747852
DIN443-42-ST-PHR: RNCC: 2 | RNVC: 2
42DIN443-PHR: RNCC: 5 | RNVC: 2
42DIN443PHR: RNCC: 5 | RNVC: 2
0630361046: RNCC: 5 | RNVC: 2
Y106 051 02: RNCC: 5 | RNVC: 2
0630 361 046: RNCC: 5 | RNVC: 2
100CP1054: RNCC: 5 | RNVC: 2
0630361046: RNCC: 5 | RNVC: 9
1122154EY8826-60: RNCC: 5 | RNVC: 9

3 Aug 1978

5340-12-307-9752
Angle Bracket

123079752
0A846.92-01-20-00-004: RNCC: 3 | RNVC: 2

15 Aug 1986

5340-12-365-5903
Angle Bracket

123655903
J32420060-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-337-7875
Butt Hinge Leaf

123377875
5801357-1890.01: RNCC: 2 | RNVC: 2
5801357-1890.01: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-12-177-2696
Butt Hinge Leaf

121772696
5801111-217-004: RNCC: 3 | RNVC: 2
5801111-217.004: RNCC: 5 | RNVC: 2

24 Jan 1979

5340-12-356-1236
Mounting Bracket

123561236
2339-220340A00C: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-183-2858
Bow Handle

121832858
5801441-31123: RNCC: 3 | RNVC: 2
5801441-31123: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-12-361-4753
Nonmetallic Bumper

123614753
N1547: RNCC: 3 | RNVC: 2
N 1547: RNCC: 5 | RNVC: 2

7 Oct 2003

5340-12-377-3944
Surface Bolt

123773944
8605001.3.550.18: RNCC: 3 | RNVC: 2
8605001355018: RNCC: 5 | RNVC: 2

14 Jan 2009

5340-12-307-0257
Retaining Strap

123070257
8-6320.03: RNCC: 2 | RNVC: 2
8-6320.03: RNCC: 3 | RNVC: 2
8-6320.03: RNCC: 5 | RNVC: 9

29 Apr 1986

5340-12-171-9181
Dust And Moisture Seal Protective Cap

121719181
G1530085-1: RNCC: 3 | RNVC: 2

29 Nov 1977

5340-12-341-8647
Mounting Bracket

123418647
2300348-970166.001.0: RNCC: 2 | RNVC: 2
2300348-970166.001.0: RNCC: 3 | RNVC: 2
1808440: RNCC: 5 | RNVC: 2

7 Nov 1996

5340-12-300-3138
Angle Bracket

123003138
4045830358: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-316-4955
Electronic Equipment Hardware Kit

123164955
ZT 940: RNCC: 3 | RNVC: 2

20 Jan 1989

5340-12-300-8422
Retaining Strap

123008422
3169950010: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-303-9817
Flush Lock

123039817
873898081A: RNCC: 3 | RNVC: 9

28 May 1985

5340-12-304-3979
Nonmetallic Bumper

123043979
AZ8104T040: RNCC: 3 | RNVC: 2
AZ8104T040: RNCC: 5 | RNVC: 9
AZ8104T040: RNCC: 5 | RNVC: 9

12 Jul 1985

5340-12-385-4283
Access Cover

123854283
5582341233: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-363-0506
Angle Bracket

123630506
81657400067: RNCC: 3 | RNVC: 2
81.65740.0067: RNCC: 5 | RNVC: 2

29 Apr 2004

5340-12-196-2248
Resilient Mount

121962248
81962100089: RNCC: 3 | RNVC: 2

14 Jun 1983

5340-12-323-8914
Extension Drawer Slide

123238914
5.043.064.9: RNCC: 3 | RNVC: 2
6814971: RNCC: 5 | RNVC: 2

8 Jan 1991

5340-12-167-5450
Nonmetallic Bumper

121675450
3557379: RNCC: 3 | RNVC: 2
3177-3927-00: RNCC: 5 | RNVC: 2
3557379: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-701-9195
Loop Clamp

127019195
T11-38-15-20 GOST 17679-80: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-050-2946

5340-12-331-3623
Double Angle Bracket

123313623
200426: RNCC: 3 | RNVC: 2
24K03-0084-00.008: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-12-152-2995
Double Angle Bracket

121522995
5800400-0070-002: RNCC: 3 | RNVC: 2
6P358-70-2: RNCC: 5 | RNVC: 2
5800400-0070-002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-5731
Mounting Bracket

123175731
4900064-41233.003: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-12-332-6765
Nonmetallic Bumper

123326765
DIN95364-D25X20-M6X18-NR55ST: RNCC: 2 | RNVC: 2
551000-25X20-M6X18.NR55.ST: RNCC: 5 | RNVC: 2
00098398720: RNCC: 5 | RNVC: 9
VG95364-D25X20-M6X18-NR55ST: RNCC: 5 | RNVC: 9

3 Sep 1993

5340-12-183-9732
Mounting Plate

121839732
C381-A27-C227: RNCC: 2 | RNVC: 2
C381A27C227: RNCC: 3 | RNVC: 2
C381-A27-C227: RNCC: 5 | RNVC: 2
C381A27C227: RNCC: 5 | RNVC: 2
C381-A27-C227: RNCC: 5 | RNVC: 2

7 Jun 1980

5340-12-302-6740
Mending Plate

123026740
5801101-2121.005: RNCC: 3 | RNVC: 2
5801101-2121.005: RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-333-5702
Mounting Plate

123335702
G32960-W0183-C120: RNCC: 3 | RNVC: 2

6 Jan 1994

5340-12-386-2850
Manual Control Lever

123862850
009-222.315-013: RNCC: 3 | RNVC: 2

22 Aug 2011

5340-12-194-3777
Dust And Moisture Seal Protective Cap

121943777
01TC60356T01: RNCC: 3 | RNVC: 2

27 Oct 1982

5340-12-374-2518
Mounting Plate

123742518
L521M3042329: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-393-7182
Manual Control Handle

123937182
9199484: RNCC: 3 | RNVC: 2

7 Oct 2013

5340-12-701-3962
Mounting Bracket

127013962
VG95211-ML-127013962: RNCC: 2 | RNVC: 2
5.12.5311.2740.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-388-3691
Loop Clamp

123883691
DIN3016-1-E2-31-25X20-W1-2-CR: RNCC: 2 | RNVC: 2

15 Mar 2012

5340-12-376-0311
Dust And Moisture Seal Protective Plug

123760311
JN0309-1: RNCC: 3 | RNVC: 2
M2875RC60-04-2G: RNCC: 3 | RNVC: 2

5 Aug 2008

5340-12-368-1320
Mounting Plate

123681320
5161-340100A01B: RNCC: 2 | RNVC: 2
5161-340100A01B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-333-6192
Resilient Mount

123336192
7101-75-84.10: RNCC: 3 | RNVC: 2
16 100 0013: RNCC: 3 | RNVC: 2
D7101-75-84.10: RNCC: 5 | RNVC: 2
7101-75-83-08: RNCC: 5 | RNVC: 9

13 Jan 1994

5340-12-188-8436
Loop Clamp

121888436
55100330: RNCC: 3 | RNVC: 2
R33: RNCC: 3 | RNVC: 2
55100330: RNCC: 5 | RNVC: 2
R33: RNCC: 5 | RNVC: 2
AS60304: RNCC: 5 | RNVC: 2
152.10.061: RNCC: 5 | RNVC: 2
152.10.061: RNCC: 5 | RNVC: 2
15210061: RNCC: 5 | RNVC: 2
2529 2182-061: RNCC: 5 | RNVC: 2
152 10 061: RNCC: 5 | RNVC: 2

3 Aug 1981

5340-12-183-5489
Electrical-Mechanical Equipment Post

121835489
10539-01: RNCC: 3 | RNVC: 2
484072: RNCC: 5 | RNVC: 2

26 Apr 1980

5340-12-312-7402
Lock-Release Lever

123127402
0220803003: RNCC: 3 | RNVC: 2
FM19-72: RNCC: 5 | RNVC: 2
02208.30 GRAU: RNCC: 5 | RNVC: 2

1 Feb 1988

5340-12-702-2146
Mounting Bracket

127022146
VG95211-ML-127022146: RNCC: 2 | RNVC: 2
30.7222.1031: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-377-1793
Loop Clamp

123771793
RSGU1.30/20-W3: RNCC: 3 | RNVC: 2
41231092: RNCC: 5 | RNVC: 2
41231071 TEIL 41231092: RNCC: 5 | RNVC: 2

16 Dec 2008

5340-12-328-9086
Metallic Solid Wheel

123289086
2653-185110.04: RNCC: 2 | RNVC: 2
2653-185110.04: RNCC: 3 | RNVC: 2
2653-185110.04: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-327-9756
Friction Catch

123279756
390004-13099: RNCC: 2 | RNVC: 2
390004-13099: RNCC: 3 | RNVC: 2

25 Mar 1992

5340-12-336-6379
Spacing Threaded Standoff

123366379
D15681: RNCC: 3 | RNVC: 2
VG95148C7XM4X63-CUZN: RNCC: 5 | RNVC: 2
D15681: RNCC: 5 | RNVC: 9

5 Dec 1994

5340-12-319-7074
Mounting Plate

123197074
1229-319.11: RNCC: 2 | RNVC: 2
533221-0051.000: RNCC: 3 | RNVC: 2
533221-0051.000: RNCC: 5 | RNVC: 9

27 Oct 1989

5340-12-330-8550
Padlock

123308550
DIN7465-E2-40-BK: RNCC: 2 | RNVC: 2

16 Feb 1993

5340-12-179-2884
Spring Tension Clip

121792884
5801113-11132: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-320-1021
Angle Bracket

123201021
C249-A15-C62: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-324-4005
Shimmy Damper

123244005
135262-04040: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-12-389-2571
Retaining Strap

123892571
CL-10+: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-12-331-7186
Pad Eye

123317186
480/7345-14-00-00/12,13: RNCC: 3 | RNVC: 2
480-7345-14-00-00-12-13: RNCC: 5 | RNVC: 2
480/7345-14-00-00/12 U. 13: RNCC: 5 | RNVC: 2
480-7345-14-00-00-12,13: RNCC: 5 | RNVC: 2
480/7345-14-00-00/12-13: RNCC: 5 | RNVC: 2

15 Jun 1993

5340-12-338-0744
Turnbuckle

123380744
S-17045-1A-19: RNCC: 3 | RNVC: 2
S-17045-1A/19: RNCC: 3 | RNVC: 2
910 000 8323: RNCC: 5 | RNVC: 2
910.000.8323: RNCC: 5 | RNVC: 2
S17045-1A/19: RNCC: 5 | RNVC: 2
S-16105-18: RNCC: 5 | RNVC: 2

18 May 1995

5340-12-141-2157
Lock-Release Lever

121412157
730043-30.08: RNCC: 2 | RNVC: 2
730043-30-08: RNCC: 5 | RNVC: 9
730043-30-08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-358-0099
Turnbuckle

123580099
862908903: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-701-8041
Angle Bracket

127018041
VG95211-ML-127018041: RNCC: 2 | RNVC: 2
5.12.8605.0950.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-4393
Handle Grip

123614393
598101-186320.002.0: RNCC: 3 | RNVC: 2

30 Sep 2003

5340-12-701-4521
Loop Clamp

127014521
VG95211-ML-127014521: RNCC: 2 | RNVC: 2
5.12.5314.1000.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-371-2684
Mounting Bracket

123712684
6.393-656.0: RNCC: 3 | RNVC: 2
6.393-656: RNCC: 5 | RNVC: 2

8 Mar 2007

5340-12-383-8104
Angle Bracket

123838104
540008-4016-A: RNCC: 2 | RNVC: 2
540008-4016-A: RNCC: 3 | RNVC: 2
4016: RNCC: 5 | RNVC: 2

9 Dec 2010

5340-12-195-8773
Case Corner

121958773
1246-451.2: RNCC: 3 | RNVC: 2
1246-451-2: RNCC: 5 | RNVC: 2
128705: RNCC: 5 | RNVC: 2
1246-451.2: RNCC: 5 | RNVC: 9

26 Apr 1983

5340-12-353-4101
Runner

123534101
374461: RNCC: 3 | RNVC: 2
70-5100-294: RNCC: 5 | RNVC: 2

21 Mar 2001

5340-12-305-3532
Dust And Moisture Seal Protective Plug

123053532
P009279938423006: RNCC: 3 | RNVC: 2
9279938423: RNCC: 5 | RNVC: 2

25 Oct 1985

5340-12-365-9943
Mounting Bracket

123659943
9305532440: RNCC: 3 | RNVC: 2

24 Feb 2005

5340-12-311-8888
Spring Tension Clip

123118888
NO PRIMARY REF 12-311-8888: RNCC: 3 | RNVC: 2
0130 7655: RNCC: 5 | RNVC: 2
01307655EY8776-22: RNCC: 5 | RNVC: 2
2001329005: RNCC: 5 | RNVC: 2

27 Oct 1987

5340-12-314-7697
Loop Clamp

123147697
LVT1731.02-081634: RNCC: 2 | RNVC: 2
LVT1731.02-081634: RNCC: 3 | RNVC: 2
081634: RNCC: 5 | RNVC: 2
KABELSCHELLE 2,92 LV T1731.02: RNCC: 5 | RNVC: 2
LVT31.02-081634: RNCC: 5 | RNVC: 2

9 Aug 1988

5340-12-356-6962
Metallic Bumper

123566962
027510305: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-312-9837
Nonmetallic Bumper

123129837
VG95092B10X5X25NR60-SCHWARZ: RNCC: 2 | RNVC: 2
82200-B10X5X25.NR60-SCHWARZ: RNCC: 3 | RNVC: 2
SCHRAUBPUFFER25X10-SCHWARZ: RNCC: 3 | RNVC: 2
B10X5X25.60NR-SCHWARZ: RNCC: 5 | RNVC: 2
25X10-NKSW: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-12-171-1480
Angle Bracket

121711480
66-3506-110-02A001: RNCC: 3 | RNVC: 2
66-3506-110-02: RNCC: 5 | RNVC: 2

12 Sep 1977

5340-12-338-8028
Mounting Plate

123388028
6700017-203220.00: RNCC: 2 | RNVC: 2
6700017-203220.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-302-8311
Metal Runner

123028311
4900123-1500.01: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-366-4303
Mounting Plate

123664303
AFG-02B-413C-5025-01: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-12-316-7927
Nonmetallic Bumper

123167927
709100-0005.000: RNCC: 3 | RNVC: 2

14 Feb 1989

5340-12-171-8633
Dust And Moisture Seal Protective Cap

121718633
0026-2024-030: RNCC: 3 | RNVC: 2
22ITEM19: RNCC: 5 | RNVC: 2
0026-2024-030: RNCC: 5 | RNVC: 9
22ITEM19: RNCC: 5 | RNVC: 9

22 Nov 1977

5340-12-321-8462
Mounting Bracket

123218462
C117-A44-C18: RNCC: 2 | RNVC: 2
C117-A44-C18: RNCC: 3 | RNVC: 2

3 Jul 1990

5340-12-169-7975
Mending Plate

121697975
1400003-10000-19: RNCC: 3 | RNVC: 2
1400003-10000-19: RNCC: 5 | RNVC: 9
1400003-10000.19: RNCC: 5 | RNVC: 9

10 Jun 1977

5340-12-314-1103
Spring Tension Clip

123141103
6100127-0000.24: RNCC: 2 | RNVC: 2
SPB 14102: RNCC: 3 | RNVC: 2
8791290008: RNCC: 5 | RNVC: 9

8 Jun 1988

5340-12-309-6961
Loop Clamp

123096961
NO PRIMARY REF 12-309-6961: RNCC: 3 | RNVC: 2
774210877: RNCC: 5 | RNVC: 2
US38: RNCC: 5 | RNVC: 9

17 Feb 1987

5340-12-352-2740
Retaining Bail

123522740
160-88310-01: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-12-307-2764
Loop Clamp

123072764
B16/12/16BX78TAN15836: RNCC: 3 | RNVC: 2
B16/12/16BX78TAN15836: RNCC: 3 | RNVC: 2
B16-12-16BX78TAN15836: RNCC: 5 | RNVC: 2
B16-12-16BX78TAN15836: RNCC: 5 | RNVC: 2

28 May 1986

5340-12-309-0018
Resilient Mount

123090018
VG95365-C6-CR-AMST: RNCC: 3 | RNVC: 2
E1N 2527-02: RNCC: 3 | RNVC: 2
E1N2527-02: RNCC: 5 | RNVC: 2
VG95365-C6-CR-AMST: RNCC: 5 | RNVC: 9

5 Dec 1986

5340-12-172-7364
Helical Compression Spring Retainer

121727364
1224-233.12: RNCC: 2 | RNVC: 2
532008-81: RNCC: 3 | RNVC: 2
532008-0081.000: RNCC: 3 | RNVC: 2
532008-0081.000: RNCC: 5 | RNVC: 2
532008-81: RNCC: 5 | RNVC: 2
1224-233.12: RNCC: 5 | RNVC: 9
1224-233-12: RNCC: 5 | RNVC: 9

14 Feb 1978

5340-12-337-6552
Double Angle Bracket

123376552
E5074-403-64: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-12-702-6331
Expansion Plug

127026331
VG95211-ML-127026331: RNCC: 2 | RNVC: 2
84-6100-888: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-155-2478
Butt Hinge Leaf

121552478
160-26948-22: RNCC: 3 | RNVC: 2
160-26948-22: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-2437
Access Cover

123162437
C22107-A202-B46: RNCC: 3 | RNVC: 2

4 Jan 1989

5340-12-701-8775
Lock-Release Lever

127018775
VG95211-ML-127018775: RNCC: 2 | RNVC: 2
76-0209-300: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-192-6486
Resilient Mount

121926486
4609870340: RNCC: 3 | RNVC: 2
721 1 17 019 2: RNCC: 5 | RNVC: 9

12 May 1982

5340-12-387-4367
Mechanic Equipment Hardware Kit

123874367
0280553-9: RNCC: 3 | RNVC: 2

15 Dec 2011

5340-12-310-8916
Resilient Mount

123108916
RU54016-7: RNCC: 3 | RNVC: 2
RU51874: RNCC: 5 | RNVC: 9

7 Jul 1987

5340-12-323-1305
Retaining Strap

123231305
3.602.0.977.042.7: RNCC: 3 | RNVC: 9
1202 7901: RNCC: 5 | RNVC: 2
1202 7903 EE 0111-21: RNCC: 5 | RNVC: 2
1202 7901: RNCC: 5 | RNVC: 9
3.602.0.977.042.7: RNCC: 5 | RNVC: 9

25 Oct 1990

5340-12-327-0825
Clamping Catch

123270825
2300232-971230.000.0: RNCC: 2 | RNVC: 2
2300232-971230.000.0: RNCC: 3 | RNVC: 2

28 Nov 1991

5340-12-177-9493
Mounting Bracket

121779493
PAN5506-6: RNCC: 3 | RNVC: 2

9 Mar 1979

5340-12-335-7789
Butt Hinge

123357789
2782-360800.004.0: RNCC: 2 | RNVC: 2
2782-360800.004.0: RNCC: 3 | RNVC: 2

15 Sep 1994

5340-12-359-9386
Metallic Bumper

123599386
2500261-820000.002.0: RNCC: 2 | RNVC: 2
2500261-820000.002.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-307-6571
Hand Crank

123076571
W-001.13: RNCC: 3 | RNVC: 2

14 Jul 1986

5340-12-325-6263
Mounting Plate

123256263
5801984-982500.007.0: RNCC: 2 | RNVC: 2
5801984-982500.007.0: RNCC: 3 | RNVC: 2
5801984-982500.007.0: RNCC: 5 | RNVC: 2

24 Jun 1991

5340-12-325-6179
Nonmetallic Bumper

123256179
1 237 553: RNCC: 3 | RNVC: 2
1 237 553.3: RNCC: 5 | RNVC: 2
16111237553: RNCC: 5 | RNVC: 2

21 Jun 1991

5340-12-305-7619
Nonmetallic Bumper

123057619
112086: RNCC: 3 | RNVC: 2

10 Dec 1985

5340-12-316-1123
Loop Clamp

123161123
1827020027: RNCC: 3 | RNVC: 2
1827 020 027: RNCC: 5 | RNVC: 2

23 Dec 1988

5340-12-358-9596
Padlock Eye

123589596
0049942045: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-198-2431
Angle Bracket

121982431
66.3851.521.03-A001: RNCC: 3 | RNVC: 2
161782: RNCC: 5 | RNVC: 2

5 Jan 1984

5340-12-360-0001
Pad Eye

123600001
9413150059: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-027-7798

5340-12-187-3335
Bail Handle

121873335
2-161/70X70 MM UND 8 MM LOCH: RNCC: 3 | RNVC: 2
2-161/70X70MMMITLOCH: RNCC: 5 | RNVC: 2

30 Mar 1981

5340-12-319-4693
Angle Bracket

123194693
P-296820-421: RNCC: 3 | RNVC: 2
P296820-421: RNCC: 5 | RNVC: 2

4 Oct 1989

5340-12-187-7070
Loop Clamp

121877070
5561778/4: RNCC: 3 | RNVC: 2
5561778-4: RNCC: 5 | RNVC: 2

29 Apr 1981

5340-12-375-7585
Block Clamp

123757585
DIN3015-L-KP-3-25-PP: RNCC: 2 | RNVC: 2
RAP325X: RNCC: 3 | RNVC: 2

2 Jul 2008

5340-12-318-5086
Recess Handle

123185086
35.57.9: RNCC: 3 | RNVC: 2
3.234.2003: RNCC: 3 | RNVC: 2
35579: RNCC: 5 | RNVC: 2
ZB0046-003: RNCC: 5 | RNVC: 2
ZB0046-003: RNCC: 5 | RNVC: 2
ZB0046-003: RNCC: 5 | RNVC: 2

21 Jul 1989

5340-12-701-7053
Angle Bracket

127017053
VG95211-ML-127017053: RNCC: 2 | RNVC: 2
5.12.7240.2520.09: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-143-0059
Loop Clamp

121430059
DIN3016-1-D2-20-20X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-20-20X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.2X20/15: RNCC: 3 | RNVC: 2
RSGU1100.2X20/15: RNCC: 5 | RNVC: 2
4219215020: RNCC: 5 | RNVC: 2
RSGU1100-2X20-15: RNCC: 5 | RNVC: 2
DIN3016-D2-20-20X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-389-4345
Flush Catch Claw

123894345
6010-12-KA: RNCC: 3 | RNVC: 2

5 Jul 2012

5340-12-318-7968
Rod End Clevis

123187968
704-126315-901-0: RNCC: 3 | RNVC: 2

17 Aug 1989

5340-12-347-0504
Angle Bracket

123470504
2300002-041176.000: RNCC: 2 | RNVC: 2
9900547: RNCC: 3 | RNVC: 2
2300002-041176.000: RNCC: 5 | RNVC: 2
2300002-041176.000: RNCC: 5 | RNVC: 9
9900547: RNCC: 5 | RNVC: 9

16 Oct 1998

5340-12-340-7774
Dust And Moisture Seal Protective Plug

123407774
2-LP-004-6-00000-73-0-KU: RNCC: 3 | RNVC: 2
26010020150: RNCC: 5 | RNVC: 2
2-LV-004-6-00000-73-0-KU: RNCC: 5 | RNVC: 9
LP-004-6-74-KU: RNCC: 5 | RNVC: 9

11 Jun 1996

5340-12-158-7273
Electrical-Mechanical Equipment Post

121587273
904-09-00-02: RNCC: 3 | RNVC: 2
9040900-02: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-197-0139
Electrical-Mechanical Equipment Post

121970139
4900059-755114.000.0: RNCC: 3 | RNVC: 2
4900059-755114-000-0: RNCC: 5 | RNVC: 2

12 Sep 1983

5340-12-701-7666
Retaining Strap

127017666
VG95211-ML-127017666: RNCC: 2 | RNVC: 2
5.12.7702.0500.35: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-146-7986
Expansion Plug

121467986
DIN442-80-ST-PHR: RNCC: 2 | RNVC: 2
80DIN442PHR: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-315-3538
Sealing Plug Assembly

123153538
1463203422: RNCC: 3 | RNVC: 2
1463203422: RNCC: 5 | RNVC: 2
1463203355: RNCC: 5 | RNVC: 9

14 Oct 1988

5340-12-300-4581
Retaining Band

123004581
5801548-01104.001: RNCC: 2 | RNVC: 2
5801548-01104.001: RNCC: 3 | RNVC: 2

3 Aug 1984

5340-12-162-5373
Nut And Bolt Locking Plate

121625373
8437045: RNCC: 3 | RNVC: 2
8061-850: RNCC: 5 | RNVC: 2
8061850: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-311-7980
Metal Runner

123117980
4900278-103400.00: RNCC: 2 | RNVC: 2
4900278-103400.00: RNCC: 3 | RNVC: 2

19 Oct 1987

5340-12-328-9054
Nut And Bolt Locking Plate

123289054
SK2504-20: RNCC: 3 | RNVC: 2
2490560: RNCC: 5 | RNVC: 2
SK2504-20: RNCC: 5 | RNVC: 2
5000821605: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-351-3785
Access Hole Frame

123513785
A3 098-103: RNCC: 3 | RNVC: 2
209519: RNCC: 5 | RNVC: 2

19 Jul 2000

5340-12-178-2292
Mending Plate

121782292
C324-A16-C99: RNCC: 2 | RNVC: 2
C324A16C99: RNCC: 3 | RNVC: 2
C324-A16-C99: RNCC: 5 | RNVC: 2
C324A16C99: RNCC: 5 | RNVC: 2
C324-A16-C99: RNCC: 5 | RNVC: 2

9 Apr 1979

5340-12-319-8880
Access Cover

123198880
3082 309 014: RNCC: 3 | RNVC: 2
3082309014: RNCC: 5 | RNVC: 9

14 Nov 1989

5340-12-158-7384
Retaining Strap

121587384
23307-261500-03-0: RNCC: 2 | RNVC: 2
23307-261500-03-0: RNCC: 5 | RNVC: 2
23307-261500.03.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-165-0451
Clamping Catch

121650451
DIN3133-D105-K25X83BK: RNCC: 2 | RNVC: 2
A105DIN3133: RNCC: 5 | RNVC: 2
A105DIN3133R0H: RNCC: 5 | RNVC: 2
DIN3133-D105-K25X83-BK: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-198-1000
Expansion Plug

121981000
3269971020: RNCC: 3 | RNVC: 2
3269971020: RNCC: 3 | RNVC: 2
51916060037: RNCC: 5 | RNVC: 2

20 Dec 1983

5340-12-308-9747
Spring Tension Clip

123089747
R04455-101: RNCC: 3 | RNVC: 2

3 Dec 1986

5340-12-361-4357
Mounting Bracket

123614357
BCTP99-00-131000.03: RNCC: 3 | RNVC: 2

30 Sep 2003

5340-12-341-1957
Angle Bracket

123411957
09.069.67.303: RNCC: 3 | RNVC: 2
230000-065100.002: RNCC: 5 | RNVC: 2

11 Dec 2002

5340-12-392-6708
Access Cover

123926708
EFT-0079-006: RNCC: 3 | RNVC: 2
EFT-0079/006: RNCC: 5 | RNVC: 2

27 Jun 2013

5340-12-328-4798
Loop Clamp

123284798
PL-KK53163PA6GA: RNCC: 3 | RNVC: 2
0009956044: RNCC: 5 | RNVC: 2
02-2806: RNCC: 5 | RNVC: 2
53163: RNCC: 5 | RNVC: 2

22 May 1992

5340-12-325-9205
Bail Handle

123259205
009-030.811-000: RNCC: 3 | RNVC: 2
12790-811000: RNCC: 5 | RNVC: 2
12790-811000: RNCC: 5 | RNVC: 9

23 Jul 1991

5340-12-350-0688
Mechanical Stop

123500688
463-069110.008: RNCC: 3 | RNVC: 9

10 Feb 2000

5340-12-311-2715
Mending Plate

123112715
1216886: RNCC: 3 | RNVC: 2
4300.165.00/23: RNCC: 5 | RNVC: 2
4300.165.00.00.023: RNCC: 5 | RNVC: 2

11 Aug 1987

5340-12-171-6317
Expansion Plug

121716317
81637310070: RNCC: 3 | RNVC: 2
81.63731-0070: RNCC: 5 | RNVC: 2
6-348: RNCC: 5 | RNVC: 9

28 Oct 1977

5340-12-319-9215
Nonmetallic Bumper

123199215
22003-14: RNCC: 3 | RNVC: 2
22003-14: RNCC: 5 | RNVC: 9

16 Nov 1989

5340-12-314-7540
Mounting Bracket

123147540
55 0398 51: RNCC: 2 | RNVC: 2
55 0398 51: RNCC: 3 | RNVC: 2
42161-21 100.03: RNCC: 5 | RNVC: 9

6 Aug 1988

5340-12-377-0578
Angle Bracket

123770578
2300232-030060.000.0: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-12-325-7415
Butt Hinge

123257415
E-4782-01-231: RNCC: 3 | RNVC: 2
E-4997-01-469: RNCC: 3 | RNVC: 2
E4782-01-231: RNCC: 5 | RNVC: 2

4 Jul 1991

5340-12-702-5497
Mounting Bracket

127025497
VG95211-ML-127025497: RNCC: 2 | RNVC: 2
5.51.7213.0008.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-322-3418
Mending Plate

123223418
2.72-16856: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-306-6377
Hinge Torsion Bar

123066377
A-230736-021: RNCC: 3 | RNVC: 2
A230736-021: RNCC: 5 | RNVC: 2

17 Mar 1986

5340-12-128-3497
Resilient Mount

121283497
10-0580-080-00: RNCC: 3 | RNVC: 2
10-0580-08-00-0: RNCC: 5 | RNVC: 2
100580-08-00-0: RNCC: 5 | RNVC: 2
ZL39338: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-0190
Angle Bracket

123050190
5801759-040000.003: RNCC: 2 | RNVC: 2
5801759-040000.003: RNCC: 3 | RNVC: 2
5801759-040000.003: RNCC: 5 | RNVC: 9

17 Sep 1985

5340-12-152-5220
Turnbuckle

121525220
148-113.U01: RNCC: 3 | RNVC: 2
148E113U1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-370-0533
Extension Drawer Slide

123700533
DTMS28F-1000/01: RNCC: 3 | RNVC: 2
DTMS28F-1000: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-12-358-9573
Strap Hinge

123589573
62720082: RNCC: 3 | RNVC: 2
2720/082: RNCC: 5 | RNVC: 9

3 Dec 2002

5340-12-187-1308
Electrical-Mechanical Equipment Post

121871308
0337 5618: RNCC: 3 | RNVC: 2
91570262: RNCC: 5 | RNVC: 2
3375618EF0171-56: RNCC: 5 | RNVC: 2
F0171-56-402-06: RNCC: 5 | RNVC: 2
3375618: RNCC: 5 | RNVC: 9

6 Mar 1981

5340-12-322-1003
Angle Bracket

123221003
42021217: RNCC: 3 | RNVC: 2
42021217EE5091-29: RNCC: 5 | RNVC: 2

24 Jul 1990

5340-12-393-8462
Mounting Bracket

123938462
11.29234-0182: RNCC: 3 | RNVC: 2
11.29234-0182: RNCC: 5 | RNVC: 2

16 Oct 2013

5340-12-177-0743
Angle Bracket

121770743
5801214-1011-009: RNCC: 3 | RNVC: 2
5801214-1011.009: RNCC: 5 | RNVC: 2

12 Jan 1979

5340-12-171-9356
Handle Grip

121719356
1000089-16100.02: RNCC: 2 | RNVC: 2
1000089-16100.02: RNCC: 3 | RNVC: 2
1000089-16100-02: RNCC: 3 | RNVC: 2
1000089-16100-02: RNCC: 5 | RNVC: 9
1000089-16100.02: RNCC: 5 | RNVC: 9

5 Dec 1977

5340-12-325-7991
Nonmetallic Bumper

123257991
5801984-984100.002.0: RNCC: 2 | RNVC: 2
PLATTE60X6X1850MM.NR60: RNCC: 3 | RNVC: 2
5801984-984100.002.0: RNCC: 5 | RNVC: 2

11 Jul 1991

5340-12-161-2279
Expansion Shield

121612279
TY8P2: RNCC: 3 | RNVC: 2
241-11829: RNCC: 5 | RNVC: 2
072070102: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-4217
Mounting Plate

123174217
P-145502-015: RNCC: 3 | RNVC: 2
P145502-015: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-307-0410
Double Angle Bracket

123070410
P-246091-041: RNCC: 3 | RNVC: 2
P246091-041: RNCC: 5 | RNVC: 2

30 Apr 1986

5340-12-341-1382
Multiple Angle Bracket

123411382
P-616815-435: RNCC: 3 | RNVC: 2
P616815-435: RNCC: 5 | RNVC: 2

31 Jul 1996

5340-12-347-5864
Clamping Catch

123475864
6020220: RNCC: 3 | RNVC: 2
6.375-112.0: RNCC: 5 | RNVC: 2
7.26.044: RNCC: 5 | RNVC: 9

11 Jan 1999

5340-12-324-6499
Mending Plate

123246499
01.48319-00000.27.4: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-12-330-7477
Handle Grip

123307477
281801334A: RNCC: 3 | RNVC: 2
281801334 A: RNCC: 5 | RNVC: 2

3 Feb 1993

5340-12-356-5220
Runner

123565220
8.1512-9.6: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-319-9312
Dust And Moisture Seal Protective Cap

123199312
127.020.8: RNCC: 3 | RNVC: 2
1900508001: RNCC: 5 | RNVC: 2

17 Nov 1989

5340-12-392-6571
Bridge Clamp

123926571
6420940125: RNCC: 3 | RNVC: 2
6420940125: RNCC: 5 | RNVC: 2

26 Jun 2013

5340-12-321-7230
Loop Clamp

123217230
2.72-28252: RNCC: 3 | RNVC: 2

19 Jun 1990

5340-12-300-9356
Angle Bracket

123009356
1310-840.14(5): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-300-8563
Angle Bracket

123008563
1301-252.19(5): RNCC: 3 | RNVC: 2

5 Sep 1984

5340-12-186-6477
Sash Pole

121866477
4-108771: RNCC: 3 | RNVC: 2

23 Jan 1981

5340-12-335-5532
Retaining Strap

123355532
1232950640: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-12-182-6906
Webbing Strap

121826906
1400046-500: RNCC: 2 | RNVC: 2
1400046-500: RNCC: 2 | RNVC: 2
1400046-500: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-12-020-5628

5340-12-302-0820
Dust And Moisture Seal Protective Plug

123020820
72/0595: RNCC: 3 | RNVC: 2
3852510083: RNCC: 5 | RNVC: 2
72/0595 101/4: RNCC: 5 | RNVC: 2

30 Nov 1984

5340-12-187-4625
Bow Handle

121874625
2300109-063110.001.0: RNCC: 2 | RNVC: 2
2300109-063110.001.0: RNCC: 3 | RNVC: 2
2300109-063110.001.0: RNCC: 3 | RNVC: 2
2300109-063110-001-0: RNCC: 5 | RNVC: 9
2300109-063110-001-0: RNCC: 5 | RNVC: 9
2300109-063110-001-0: RNCC: 5 | RNVC: 9
2300109-063110.001.0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-143-7716
Rubber Bumper

121437716
NO PRIMARY REF 12-143-7716: RNCC: 3 | RNVC: 2
Z252: RNCC: 5 | RNVC: 9
126-3-6-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-6945
Mounting Plate

127016945
VG95211-ML-127016945: RNCC: 2 | RNVC: 2
5.12.7222.1000.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-197-8915
Angle Bracket

121978915
A-296710-145: RNCC: 3 | RNVC: 2
A296710-145: RNCC: 5 | RNVC: 2

30 Nov 1983

5340-12-701-6296
Angle Bracket

127016296
VG95211-ML-127016296: RNCC: 2 | RNVC: 2
5.12.7050.0040.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-197-8918
Angle Bracket

121978918
P-296881-407: RNCC: 3 | RNVC: 2
P296881-407: RNCC: 5 | RNVC: 2

30 Nov 1983

5340-12-374-9614
Lock-Release Lever

123749614
2 0000-018: RNCC: 3 | RNVC: 2
2 0000-018: RNCC: 5 | RNVC: 2

9 Apr 2008

5340-12-026-9703

5340-12-379-8515
Multiple Angle Bracket

123798515
SK1121-187702.001.0: RNCC: 3 | RNVC: 2
1312741: RNCC: 5 | RNVC: 2

8 Sep 2009

5340-12-330-3364
Clamping Catch

123303364
M-18-061: RNCC: 3 | RNVC: 2

3 Dec 1992

5340-12-393-6450
Manual Control Lever

123936450
3046588: RNCC: 3 | RNVC: 2
03046588: RNCC: 5 | RNVC: 2

30 Sep 2013

5340-12-363-4480
Mounting Bracket

123634480
9997010-014152.04: RNCC: 3 | RNVC: 2

17 Jun 2004

5340-12-184-9129
Metal Runner

121849129
490006-4032: RNCC: 2 | RNVC: 2

28 Aug 1980

5340-12-374-4473
Rod End Clevis

123744473
DIN71752-G14X56-C15E-ZNPHR5F: RNCC: 2 | RNVC: 2
06360640164: RNCC: 3 | RNVC: 2
06.36064-0164: RNCC: 5 | RNVC: 2

18 Feb 2008

5340-12-179-7507
Loop Clamp

121797507
538036-0030.000: RNCC: 3 | RNVC: 2
1264-3202-211: RNCC: 3 | RNVC: 2
538036-0030: RNCC: 5 | RNVC: 9
538036-0030.000: RNCC: 5 | RNVC: 9

25 Jul 1979

5340-12-313-0810
Turnbuckle Body

123130810
7.33.7-05.00.09-01: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-12-359-4368
Loop Clamp

123594368
DIN3016-1-E1-30X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-340-6910
Nonmetallic Bumper

123406910
704-180120-912-0: RNCC: 3 | RNVC: 2

23 May 1996

5340-12-701-1610
Mounting Bracket

127011610
VG95211-ML-127011610: RNCC: 2 | RNVC: 2
5.12.0235.1086.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-323-5736
Mounting Bracket

123235736
160-82091-04: RNCC: 3 | RNVC: 2
160-82091.04: RNCC: 5 | RNVC: 2
160-82091-04: RNCC: 5 | RNVC: 2
160-82091.04: RNCC: 5 | RNVC: 9

7 Dec 1990

5340-12-394-8644

5340-12-416-6342

5340-12-701-6189
Angle Bracket

127016189
VG95211-ML-127016189: RNCC: 2 | RNVC: 2
5.12.7011.0122.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7176
Angle Bracket

127017176
VG95211-ML-127017176: RNCC: 2 | RNVC: 2
5.12.7601.8173.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2910
Threaded End Tensioning Tie Rod

127012910
VG95211-ML-127012910: RNCC: 2 | RNVC: 2
5.12.5101.2660.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-164-8930
Loop Clamp

121648930
F15TAN15802-1-4544-9: RNCC: 3 | RNVC: 2
F15TAN15802N: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-351-2043
Plain Solid Disk

123512043
3060-00-3191D0.02: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-12-335-3879
Runner

123353879
347-150-035A: RNCC: 2 | RNVC: 2
347-150-035A: RNCC: 3 | RNVC: 2

16 Aug 1994

5340-12-702-2421
Mounting Plate

127022421
VG95211-ML-127022421: RNCC: 2 | RNVC: 2
30.7702.70.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-199-5575
Mending Plate

121995575
2300002-122870.000: RNCC: 2 | RNVC: 2
2300002-122870.000: RNCC: 3 | RNVC: 2
2300002-122870: RNCC: 5 | RNVC: 9

11 May 1984

5340-12-358-0542
Metallic Solid Wheel

123580542
866416602: RNCC: 3 | RNVC: 2

6 Sep 2002

5340-12-702-6132
Dust And Moisture Seal Protective Cap

127026132
VG95211-ML-127026132: RNCC: 2 | RNVC: 2
6 OST1 10471-72: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-366-7646
Mounting Plate

123667646
2300421-204838.002: RNCC: 2 | RNVC: 2
2300421-204838.002: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-12-309-0020
Resilient Mount

123090020
VG95365-C4-CR-AMST: RNCC: 3 | RNVC: 2
E1N 2529-02: RNCC: 3 | RNVC: 2
E1N2529-02: RNCC: 5 | RNVC: 2
1956981: RNCC: 5 | RNVC: 2
VG95365-C4-CR-AMST: RNCC: 5 | RNVC: 9

5 Dec 1986

5340-12-362-0097
Mounting Bracket

123620097
50-000-273: RNCC: 3 | RNVC: 2

16 Dec 2003

5340-12-309-3001
Electrical-Mechanical Equipment Post

123093001
0A846.92-10-20-00-001: RNCC: 3 | RNVC: 2

13 Jan 1987

5340-12-381-6386
Clamping Catch

123816386
DIN3134-D55SW: RNCC: 2 | RNVC: 2

11 Mar 2010

5340-12-344-1899
Angle Bracket

123441899
454-250716.001: RNCC: 3 | RNVC: 2
9892788: RNCC: 5 | RNVC: 9
454-250716.001: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-12-309-1584
Mending Plate

123091584
P-297125-085: RNCC: 3 | RNVC: 2
P297125-085: RNCC: 5 | RNVC: 2

18 Dec 1986

5340-12-359-7207
Access Cover

123597207
2500261-180322.000.0: RNCC: 2 | RNVC: 2
2500261-180322.000.0: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-325-6159
Resilient Mount

123256159
GN5.53-50SHORE A: RNCC: 3 | RNVC: 9
0009884211: RNCC: 5 | RNVC: 2

21 Jun 1991

5340-12-325-3700
Nonmetallic Bumper

123253700
2300061-053000.022: RNCC: 2 | RNVC: 2
2300061-053000.022: RNCC: 3 | RNVC: 2
2300061-053000.022: RNCC: 5 | RNVC: 9
9845611: RNCC: 5 | RNVC: 9
2300061-053000.022: RNCC: 5 | RNVC: 9

29 May 1991

5340-12-393-7641
Access Cover

123937641
11.44051-0043: RNCC: 3 | RNVC: 2
11.44051-0043: RNCC: 5 | RNVC: 2

9 Oct 2013

5340-12-196-8415
Nonmetallic Solid Wheel

121968415
00465-004-000: RNCC: 3 | RNVC: 2
465-04: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-12-195-2363
Electronic Equipment Hardware Kit

121952363
IR300029-5000: RNCC: 3 | RNVC: 9
300029-5000: RNCC: 5 | RNVC: 9

27 Jan 1983

5340-12-171-4355
Spring Tension Clip

121714355
10057: RNCC: 3 | RNVC: 2
10057D: RNCC: 5 | RNVC: 2

13 Oct 1977

5340-12-303-2631
Angle Bracket

123032631
P-886751-001: RNCC: 3 | RNVC: 2
P886751-001: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-312-6229
Retaining Strap

123126229
DIN3016-1-F1-60X25-W5-CR: RNCC: 2 | RNVC: 2
9420725060: RNCC: 3 | RNVC: 2
DIN3016-F1-60X25-W5: RNCC: 3 | RNVC: 2
RSGU2.60/25-W5: RNCC: 5 | RNVC: 2
09420725060: RNCC: 5 | RNVC: 2
DIN3016-F1-60X25-W5: RNCC: 5 | RNVC: 9
DIN3016-1-F1-60X25-W5: RNCC: 5 | RNVC: 9
VG95931-F60X25-W5: RNCC: 5 | RNVC: 9

22 Jan 1988

5340-12-366-9115
Lock-Release Lever

123669115
2300399-183510.000.0: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-192-6122
Mending Plate

121926122
632-761161.03.0: RNCC: 3 | RNVC: 2
632-761161-03-0: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-305-5180
Mending Plate

123055180
2300124-180000.001.0: RNCC: 2 | RNVC: 2
2300124-180000.001.0: RNCC: 3 | RNVC: 2
2300124-180000.001.0: RNCC: 3 | RNVC: 2
2300124-180000.001.0: RNCC: 5 | RNVC: 9

18 Nov 1985

5340-12-189-5554
Retaining Strap

121895554
8-5020.01: RNCC: 2 | RNVC: 2
8-5020-01: RNCC: 2 | RNVC: 2
8-5020.01: RNCC: 3 | RNVC: 2
8-5020-01: RNCC: 5 | RNVC: 9
8-5020.01: RNCC: 5 | RNVC: 9
8-5020.01: RNCC: 5 | RNVC: 9

5 Oct 1981

5340-12-151-6285
Spring Tension Clip

121516285
2360-150022.05.0: RNCC: 2 | RNVC: 2
5077 304 239: RNCC: 3 | RNVC: 2
3-3331-1800-1: RNCC: 5 | RNVC: 2
3333118001: RNCC: 5 | RNVC: 2
2360-150022-05-0: RNCC: 5 | RNVC: 2
2360-150022.05.0: RNCC: 5 | RNVC: 2
5077304239: RNCC: 5 | RNVC: 2
2360-150022-05-0: RNCC: 5 | RNVC: 2
2360-150022.05.0: RNCC: 5 | RNVC: 2
3.3331-1800.1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-5833
Mounting Bracket

127015833
VG95211-ML-127015833: RNCC: 2 | RNVC: 2
5.12.6409.1520.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-330-6313
Clamping Catch

123306313
V951L03-1-2AF: RNCC: 3 | RNVC: 2
51L3-1-2AF: RNCC: 5 | RNVC: 2
51L3-1X2AC: RNCC: 5 | RNVC: 2
51L3-1-2AC: RNCC: 5 | RNVC: 2

19 Jan 1993

5340-12-338-6882
Clamping Catch

123386882
V951L03-1X5BP: RNCC: 3 | RNVC: 2
V951L03-1-5BP: RNCC: 5 | RNVC: 2

16 Aug 1995

5340-12-301-5162
Metal Runner

123015162
1000163-371019.000.0: RNCC: 2 | RNVC: 2
1000163-371019.000.0: RNCC: 3 | RNVC: 2

20 Oct 1984

5340-12-312-4350
Retaining Clip

123124350
432A526.000: RNCC: 3 | RNVC: 2
432 A 526.000: RNCC: 3 | RNVC: 2
234.326.000: RNCC: 3 | RNVC: 2
378.23058: RNCC: 5 | RNVC: 2

6 Jan 1988

5340-12-332-8258
Mounting Bracket

123328258
81669225003: RNCC: 2 | RNVC: 2
81669225003: RNCC: 3 | RNVC: 2
81.66922.5003: RNCC: 5 | RNVC: 2

23 Sep 1993

5340-12-340-3397
Resilient Mount

123403397
SP1B05: RNCC: 3 | RNVC: 2
SP 1 B 05 SPEC.: RNCC: 5 | RNVC: 2

27 Mar 1996

5340-12-301-8327
Electrical-Mechanical Equipment Post

123018327
1000163-371040.006.0: RNCC: 2 | RNVC: 2
1000163-371040.006.0: RNCC: 3 | RNVC: 2

13 Nov 1984

5340-12-369-5922
Webbing Strap

123695922
1030099-180070.000.0: RNCC: 2 | RNVC: 2
1030099-180070.000.0: RNCC: 3 | RNVC: 2

27 Jul 2006

5340-12-185-4402
Angle Bracket

121854402
CF 415 941 A: RNCC: 2 | RNVC: 2
CF 415 941 A: RNCC: 3 | RNVC: 2
CF 415 941 A: RNCC: 5 | RNVC: 2
CF415941A: RNCC: 5 | RNVC: 2
CF415941A: RNCC: 5 | RNVC: 2
CF415941A: RNCC: 5 | RNVC: 2

7 Oct 1980

5340-12-320-0918
Antipilferage Seal

123200918
3 020 030 039: RNCC: 3 | RNVC: 2
3020030039: RNCC: 5 | RNVC: 2

6 Dec 1989

5340-12-358-7911
Metal Grille

123587911
S.3015.299: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-314-5236
Access Cover

123145236
272.1768.21-12: RNCC: 2 | RNVC: 2
272.1768.21-12: RNCC: 3 | RNVC: 2

15 Jul 1988

5340-12-353-9387
Angle Bracket

123539387
6600211-201700.01: RNCC: 2 | RNVC: 2
6600211-201700.01: RNCC: 3 | RNVC: 2

21 May 2001

5340-12-314-5914
Angle Bracket

123145914
512214-0202.000: RNCC: 3 | RNVC: 2
512214-0202: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-12-385-3474
Dust And Moisture Seal Boot

123853474
9GD735641-00: RNCC: 3 | RNVC: 2
35427055: RNCC: 5 | RNVC: 2
IMT00370: RNCC: 5 | RNVC: 2
9GD735641-00: RNCC: 5 | RNVC: 2

25 May 2011

5340-12-304-5181
Bridge Clamp

123045181
47 187-001: RNCC: 2 | RNVC: 2
47187-001: RNCC: 3 | RNVC: 2
47 187-001: RNCC: 5 | RNVC: 9

26 Jul 1985

5340-12-318-8108
Double Angle Bracket

123188108
6100125-4000.002: RNCC: 2 | RNVC: 2
4110010168: RNCC: 3 | RNVC: 2

18 Aug 1989

5340-12-149-7734
Webbing Strap

121497734
5800603-0952.000: RNCC: 2 | RNVC: 2
ST5800603-0952.000: RNCC: 5 | RNVC: 2
7409590018: RNCC: 5 | RNVC: 2
5800603-0952-000: RNCC: 5 | RNVC: 9
ST5800603-0952-000: RNCC: 5 | RNVC: 9
74095 90018: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-6435
Mending Plate

123286435
160-24570-63: RNCC: 3 | RNVC: 2
160-24570.63: RNCC: 5 | RNVC: 2
160-24570-63: RNCC: 5 | RNVC: 2
160-24570.63: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-12-391-4237
Protection Bellows

123914237
06544-01: RNCC: 3 | RNVC: 2
81964200552: RNCC: 5 | RNVC: 2
81.96420-0552: RNCC: 5 | RNVC: 9

12 Mar 2013

5340-12-183-9885
Angle Bracket

121839885
42023737: RNCC: 3 | RNVC: 2
42023737EZ5004-26: RNCC: 5 | RNVC: 9

10 Jun 1980

5340-12-702-5360
Angle Bracket

127025360
VG95211-ML-127025360: RNCC: 2 | RNVC: 2
5.51.7204.0601.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-172-2533
Mending Plate

121722533
2360-261140.04.0: RNCC: 2 | RNVC: 2
2360-261140.04.0: RNCC: 3 | RNVC: 2
2360-261140-04-0: RNCC: 5 | RNVC: 2
2360-261140.04.0: RNCC: 5 | RNVC: 2
2360-261140-04-0: RNCC: 5 | RNVC: 9
2360-261140.04.0: RNCC: 5 | RNVC: 9

4 Jan 1978

5340-12-306-0933
Angle Bracket

123060933
P-295646-405: RNCC: 3 | RNVC: 2
P295646-405: RNCC: 5 | RNVC: 2

27 Jan 1986

5340-12-301-2623
Mending Plate

123012623
39-1993-000000.11.0: RNCC: 2 | RNVC: 2
39-1993-000000.11.0: RNCC: 3 | RNVC: 2
WW 453 811: RNCC: 3 | RNVC: 9
WW 453 811: RNCC: 5 | RNVC: 2

29 Sep 1984

5340-12-359-9366
Mounting Plate

123599366
2500261-182002.001.0: RNCC: 2 | RNVC: 2
2500261-182002.001.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-181-2482
Dust And Moisture Seal Protective Plug

121812482
2127-02-00.00: RNCC: 3 | RNVC: 2
VERSCHL. ST. MIT LASCHE M16X1,5: RNCC: 3 | RNVC: 2
VERSCHL. ST. MITLASCHE M16X1,5: RNCC: 5 | RNVC: 2
2127-02-00-00: RNCC: 5 | RNVC: 2

7 Nov 1979

5340-12-349-5199
Snap-In Plain Standoff

123495199
RD-00-120000.01: RNCC: 3 | RNVC: 2

25 Nov 1999

5340-12-188-4991
Electrical-Mechanical Equipment Post

121884991
9000S0548-00-04: RNCC: 3 | RNVC: 2

14 Jul 1981

5340-12-300-2614
Handwheel

123002614
5801411-41254: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-199-7544
Bridge Clamp

121997544
1300391-000000.07: RNCC: 2 | RNVC: 2
49.005.00000.07E: RNCC: 3 | RNVC: 2

26 May 1984

5340-12-344-1636
Clamping Catch

123441636
2000-RB-NS-NR: RNCC: 3 | RNVC: 2

22 Sep 1997

5340-12-391-0000
Mounting Bracket

123910000
9999261-264030.000.0: RNCC: 3 | RNVC: 2

14 Jan 2013

5340-12-177-4135
Angle Bracket

121774135
2300002-223000.007: RNCC: 2 | RNVC: 2
2300002-223000.007: RNCC: 3 | RNVC: 2
2300002-223000-007: RNCC: 5 | RNVC: 9
2300002-223000.007: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-188-8028
Loop Clamp

121888028
5800261-800.03: RNCC: 3 | RNVC: 2
5800261-800-03: RNCC: 5 | RNVC: 2
5800261-800.03: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-355-7870
Mounting Bracket

123557870
2125-121600B07B: RNCC: 2 | RNVC: 2
2125-121600B07B: RNCC: 3 | RNVC: 2

14 Dec 2001

5340-12-320-2863
Retaining Strap

123202863
11 2500 460: RNCC: 3 | RNVC: 2
42209227: RNCC: 5 | RNVC: 2
42209227EZ5550-29: RNCC: 5 | RNVC: 2

28 Dec 1989

5340-12-338-8230
Mounting Bracket

123388230
393-206000.013: RNCC: 3 | RNVC: 9
9847358: RNCC: 5 | RNVC: 9

29 Aug 1995

5340-12-309-1815
Case Corner

123091815
P-244558-755: RNCC: 3 | RNVC: 2
P244558-755: RNCC: 5 | RNVC: 2

19 Dec 1986

5340-12-178-3359
Nonmetallic Bumper

121783359
2300074-4179.01: RNCC: 2 | RNVC: 2
822-2300074-4179.01-NBR55: RNCC: 3 | RNVC: 2
2300074-4179.01: RNCC: 3 | RNVC: 2
82200-2300074-4179.01: RNCC: 5 | RNVC: 2
2300074-4179.01: RNCC: 5 | RNVC: 2
2300074-4179-01: RNCC: 5 | RNVC: 9
2300074-4179.01: RNCC: 5 | RNVC: 9
2300074-4179-01: RNCC: 5 | RNVC: 9

12 Apr 1979

5340-12-321-8930
Loop Clamp

123218930
DIN3015-LA-K-2G-18-PA6-W1: RNCC: 2 | RNVC: 2
HRGL2A18PA STMBL: RNCC: 3 | RNVC: 2
RANG3-218: RNCC: 3 | RNVC: 2
SP218PAH-DP-AS: RNCC: 3 | RNVC: 2
RANG3-218: RNCC: 5 | RNVC: 2
DIN3015-LA-K-2G-18-PA-W1: RNCC: 5 | RNVC: 2
DIN3015-LA2G-18PA-W1-K: RNCC: 5 | RNVC: 2
VG95932A2-18-PA-W1: RNCC: 5 | RNVC: 9

6 Jul 1990

5340-12-166-0373
Loop Clamp

121660373
DIN3016-1-D1-21X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-21X12-W1-2: RNCC: 3 | RNVC: 2
RSGU1.21/12: RNCC: 3 | RNVC: 2
DZ0925233: RNCC: 5 | RNVC: 2
9410012021: RNCC: 5 | RNVC: 2
RSGU1100-21-12: RNCC: 5 | RNVC: 2
RSGU1100.21/12: RNCC: 5 | RNVC: 2
DIN3016-D1-21X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-D21X12-W1: RNCC: 5 | RNVC: 9
VG95931D21X12W1: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-12-319-6468
Double Angle Bracket

123196468
P-296885-056: RNCC: 3 | RNVC: 2
P296885-056: RNCC: 5 | RNVC: 2

20 Oct 1989

5340-12-307-5839
Angle Bracket

123075839
P-244539-751: RNCC: 3 | RNVC: 2
P244539-751: RNCC: 5 | RNVC: 2

4 Jul 1986

5340-12-315-6195
Resilient Mount

123156195
12145105EB0211-47: RNCC: 2 | RNVC: 2
ZE860129/2BL.1.1: RNCC: 3 | RNVC: 2
64090010: RNCC: 5 | RNVC: 2
1214 5105: RNCC: 5 | RNVC: 2
1214 5105EB: RNCC: 5 | RNVC: 9
12145105EB0211-47: RNCC: 5 | RNVC: 9

12 Nov 1988

5340-12-356-4580
Webbing Strap

123564580
SR-220-109/2,5M+2XSP252: RNCC: 3 | RNVC: 2

1 Mar 2002

5340-12-333-4114
Spring Holder

123334114
136-768286-002-A: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-197-7684
Angle Bracket

121977684
A-145401-097: RNCC: 3 | RNVC: 2
A145401-097: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-301-2030
Angle Bracket

123012030
A-244829-761: RNCC: 3 | RNVC: 2
A244829-761: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-168-2831
Loop Clamp

121682831
DIN3016-1-A1-35X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-35X20-W1-2: RNCC: 3 | RNVC: 2
RS1.35/20: RNCC: 3 | RNVC: 2
4110020035: RNCC: 5 | RNVC: 2
RS1100-35-20: RNCC: 5 | RNVC: 2
RS1100.35/20: RNCC: 5 | RNVC: 2
DIN3016-A1-35X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-A35X20-W1: RNCC: 5 | RNVC: 9
VG95931A35X20W1: RNCC: 5 | RNVC: 9

4 Mar 1977

5340-12-316-4752
Angle Bracket

123164752
P-050301-005: RNCC: 3 | RNVC: 2
P050301-005: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-318-3263
Bow Handle

123183263
VG95149A120X24X8AL-FB: RNCC: 2 | RNVC: 2
6600015-7.007: RNCC: 3 | RNVC: 2
6600015-7.007: RNCC: 5 | RNVC: 9

30 Jun 1989

5340-12-328-3093
Access Cover

123283093
2287128937: RNCC: 3 | RNVC: 2
22871 28937: RNCC: 5 | RNVC: 9
22871-28937: RNCC: 5 | RNVC: 9
LMT-0600.003.6: RNCC: 5 | RNVC: 9

6 May 1992

5340-12-190-8753
Helical Compression Spring Seat

121908753
2410320054: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-185-4412
Double Angle Bracket

121854412
CF 407 136: RNCC: 2 | RNVC: 2
CF 407 136: RNCC: 3 | RNVC: 2
CF407136: RNCC: 5 | RNVC: 2
CF407136: RNCC: 5 | RNVC: 2
CF 407 136: RNCC: 5 | RNVC: 2
CF407136: RNCC: 5 | RNVC: 2

7 Oct 1980

5340-12-011-4553

5340-12-043-1929

5340-12-143-0896
Gummi- Riemen

121430896
25704-192820.00.0: RNCC: 2 | RNVC: 2
25704-192820.00.0: RNCC: 3 | RNVC: 2
25704-192820.00.0: RNCC: 5 | RNVC: 2
5340H 092: RNCC: 5 | RNVC: 2
CF 453 211 B: RNCC: 5 | RNVC: 2
CF453211B: RNCC: 5 | RNVC: 2
25704-192820-00-0: RNCC: 5 | RNVC: 2
CF453211B: RNCC: 5 | RNVC: 2
25704-192820.00.0: RNCC: 5 | RNVC: 2
CF 453 211 B: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-377-2782
Mounting Bracket

123772782
41269685: RNCC: 3 | RNVC: 2

23 Dec 2008

5340-12-193-3879
Nonmetallic Bumper

121933879
VKF 32X13,5X63 MM: RNCC: 3 | RNVC: 2
VKF32X13-5X63: RNCC: 5 | RNVC: 2
BBZ0065: RNCC: 5 | RNVC: 2

15 Jul 1982

5340-12-308-5778
Mending Plate

123085778
2800017-200-03: RNCC: 2 | RNVC: 2
25300147: RNCC: 3 | RNVC: 2

27 Oct 1986

5340-12-322-4886
Caster Frame

123224886
8100397-410: RNCC: 2 | RNVC: 2
8100397-410: RNCC: 3 | RNVC: 2

27 Aug 1990

5340-12-302-8507
Nonmetallic Solid Wheel

123028507
4-115181: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-174-0925
Door Handle

121740925
11.009.900-3: RNCC: 3 | RNVC: 2
81.62641.0006: RNCC: 5 | RNVC: 2
81.62641.0044: RNCC: 5 | RNVC: 2
81626410006: RNCC: 5 | RNVC: 2
81626410044: RNCC: 5 | RNVC: 2
11.009.400-3: RNCC: 5 | RNVC: 2
5000253177: RNCC: 5 | RNVC: 2
5000253177: RNCC: 5 | RNVC: 2

6 Jun 1978

5340-12-386-3199
Access Cover

123863199
2500262-560100.002.0: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-312-8598
Helical Compression Spring Retainer

123128598
2500075-321866.00.0: RNCC: 2 | RNVC: 2
2500075-321866.00.0: RNCC: 3 | RNVC: 2

12 Feb 1988

5340-12-302-7910
Plain Solid Disk

123027910
178.E65.80A-8: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-392-6665
Leather Strap

123926665
C 6120 101 A: RNCC: 3 | RNVC: 2
C 6120 101 A: RNCC: 5 | RNVC: 2
130.030: RNCC: 5 | RNVC: 9

27 Jun 2013

5340-12-197-4008
Mending Plate

121974008
6100.010.3: RNCC: 3 | RNVC: 2

19 Oct 1983

5340-12-306-3202
Mending Plate

123063202
8100219-1000-06: RNCC: 2 | RNVC: 2
8100591-1450: RNCC: 3 | RNVC: 2
4446 1151 00: RNCC: 3 | RNVC: 2
8100219-1000-06: RNCC: 5 | RNVC: 9

19 Feb 1986

5340-12-700-1420
Dust And Moisture Seal Protective Cap

127001420
160.022.001.000: RNCC: 3 | RNVC: 2
1464454392671263: RNCC: 5 | RNVC: 2
65-15132704663: RNCC: 5 | RNVC: 2
GUMMISCHUTZKAPPE RT150: RNCC: 5 | RNVC: 2

26 Sep 1991

5340-12-162-5013
Mending Plate

121625013
100356-200000.37: RNCC: 2 | RNVC: 2
100356-200000.37: RNCC: 3 | RNVC: 2
100356-200000-37: RNCC: 5 | RNVC: 2
100356-200000-37: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-362-5679
Loop Clamp

123625679
DIN3567-A34: RNCC: 2 | RNVC: 2

6 Mar 2004

5340-12-145-2772
Hinged Hasp

121452772
23179-825-00: RNCC: 2 | RNVC: 2
23179-825-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-164-0924
Mending Plate

121640924
100356-200000.46: RNCC: 2 | RNVC: 2
100356-200000.46: RNCC: 3 | RNVC: 2
100356-200000.46: RNCC: 5 | RNVC: 2
100356-200000-46: RNCC: 5 | RNVC: 2
100356-200000.46: RNCC: 5 | RNVC: 9
100356-200000-46: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-340-0887
Loop Clamp

123400887
V6530-00003-052: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-315-7938
Loop Clamp

123157938
51974010017: RNCC: 3 | RNVC: 2
51.97401-0017: RNCC: 5 | RNVC: 2

26 Nov 1988

5340-12-145-6086
Resilient Mount

121456086
23176-207131.02.0: RNCC: 2 | RNVC: 2
23176-207131.02.0: RNCC: 3 | RNVC: 2
23176-207131-02-0: RNCC: 5 | RNVC: 2
23176-207131.02.0: RNCC: 5 | RNVC: 2
23176-207131-02-0: RNCC: 5 | RNVC: 9
23176-207131.02.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-310-2753
Mending Plate

123102753
E2-2012151: RNCC: 2 | RNVC: 2
E2-2012151: RNCC: 3 | RNVC: 2
E2-2012151: RNCC: 5 | RNVC: 9

4 May 1987

5340-12-353-8612
Double Angle Bracket

123538612
J92222220-401: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-183-2788
Metal Runner

121832788
844-30-110000005-0B: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-12-317-3189
Angle Bracket

123173189
4900064-4127.002: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-369-8764
Sch Ersatzteilsatz

123698764
111112: RNCC: 3 | RNVC: 2
5355300AAMMCH00: RNCC: 5 | RNVC: 2
GSV3553A-BRASS SATIN CHROMED: RNCC: 5 | RNVC: 2

23 Aug 2006

5340-12-175-6403
Webbing Strap

121756403
23111-4126.00: RNCC: 2 | RNVC: 2
983 237-257: RNCC: 3 | RNVC: 2
23111-4126.00: RNCC: 3 | RNVC: 2
23111-4126.00: RNCC: 3 | RNVC: 9
23111-4126-00: RNCC: 5 | RNVC: 2
23111-4126.00: RNCC: 5 | RNVC: 9
23111-4126-00: RNCC: 5 | RNVC: 9
23111-4126-00: RNCC: 5 | RNVC: 9
000-C1-25X2,5X410-BW-RAL6031: RNCC: 6 | RNVC: 9

10 Oct 1978

5340-12-371-4761
Multiple Angle Bracket

123714761
23302-182300.11: RNCC: 2 | RNVC: 2
23302-182300.11: RNCC: 3 | RNVC: 2
2609280: RNCC: 5 | RNVC: 2
4-2609-280: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-12-315-9011
Mounting Bracket

123159011
2300014-030010.01.0: RNCC: 2 | RNVC: 2
2300014-030010.01.0: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-12-143-8089
Turnbuckle Body

121438089
DIN1479-SPM6-ST: RNCC: 2 | RNVC: 2
SP-DIN1479-M6-ROH: RNCC: 3 | RNVC: 2
5500006S: RNCC: 5 | RNVC: 2
M6DIN1479: RNCC: 5 | RNVC: 2
SPM6DIN1479: RNCC: 5 | RNVC: 2
93340420: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-354-7684
Mounting Bracket

123547684
FM-E4-3009350: RNCC: 3 | RNVC: 2

23 Aug 2001

5340-12-158-9665
Dust And Moisture Seal Protective Cap

121589665
250/32: RNCC: 3 | RNVC: 2
GPN250/32: RNCC: 5 | RNVC: 2
250-32: RNCC: 5 | RNVC: 9
250-32GPN250: RNCC: 5 | RNVC: 9
GPN250-32: RNCC: 5 | RNVC: 9
250003200: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-3895
Retaining Bail

127023895
VG95211-ML-127023895: RNCC: 2 | RNVC: 2
5.12.5111.4010.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-379-4263
Elastic Strap

123794263
2300500-200019.000.0: RNCC: 2 | RNVC: 2
2300500-200019.000.0: RNCC: 3 | RNVC: 2

22 Jul 2009

5340-12-382-9711
Spring Loaded Cylinder Fastener

123829711
598101-183670.000.0: RNCC: 3 | RNVC: 2

30 Aug 2010

5340-12-315-6112
Resilient Mount

123156112
H125-216-110-150-8-FF: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-12-341-9083
Mounting Plate

123419083
2300232-205000.018.0: RNCC: 2 | RNVC: 2
2300232-205000.018.0: RNCC: 3 | RNVC: 2

14 Nov 1996

5340-12-701-4817
Retaining Band

127014817
VG95211-ML-127014817: RNCC: 2 | RNVC: 2
5.12.5811.2060.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-172-0662
Electrical-Mechanical Equipment Post

121720662
VG95148B7XM3X50-3.1645.51-EQ-E1: RNCC: 2 | RNVC: 2
WN02-007: RNCC: 3 | RNVC: 2
VG95148B7XM3X50-3.1645.51-EQ-E1: RNCC: 3 | RNVC: 2

19 Dec 1977

5340-12-701-1893
Angle Bracket

127011893
VG95211-ML-127011893: RNCC: 2 | RNVC: 2
5.12.0430.4062.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-325-0500
Mounting Plate

123250500
702-781160-000-0: RNCC: 3 | RNVC: 2

26 Apr 1991

5340-12-394-6406
Spacing Threaded Standoff

123946406
1576074: RNCC: 3 | RNVC: 2
592-200210.38.0: RNCC: 5 | RNVC: 2

2 Jan 2014

5340-12-702-9377
Dust And Moisture Seal Protective Cap

127029377
VG95211-ML-127029377: RNCC: 2 | RNVC: 2
5660A-M20X1-1: RNCC: 3 | RNVC: 2
0500840347829: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-193-2535
Pad Eye

121932535
1531600: RNCC: 3 | RNVC: 2
G-1531600: RNCC: 5 | RNVC: 2

5 Jul 1982

5340-12-344-3759
Angle Bracket

123443759
A-296860-014: RNCC: 3 | RNVC: 2
A296860-014: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-348-2642
Angle Bracket

123482642
A-085047-003: RNCC: 3 | RNVC: 2
A085047-003: RNCC: 5 | RNVC: 2

19 May 1999

5340-12-196-9023
Angle Bracket

121969023
A-295150-001: RNCC: 3 | RNVC: 2
A295150-001: RNCC: 5 | RNVC: 2

30 Aug 1983

Load More Results