What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 148 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 148 of 178

5340-12-335-0827
Elbow Catch

123350827
7951: RNCC: 3 | RNVC: 2
BW203317: RNCC: 5 | RNVC: 2

21 Jul 1994

5340-12-387-9732
Filler Opening Cap

123879732
0162314: RNCC: 3 | RNVC: 2
CV136035: RNCC: 5 | RNVC: 2
0162314: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-12-349-1898
Metal Grille

123491898
88521 15482: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-324-1322
Mending Plate

123241322
8401494: RNCC: 3 | RNVC: 2
0018577: RNCC: 5 | RNVC: 2

23 Jan 1991

5340-12-151-4955
Butt Hinge

121514955
DIN31211N5: RNCC: 2 | RNVC: 2
N5DIN31211: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-364-6587
Multiple Angle Bracket

123646587
54.1105.201.00: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-378-4765
Mending Plate

123784765
3085 310 011: RNCC: 3 | RNVC: 2
3085 310 011: RNCC: 5 | RNVC: 2

8 Apr 2009

5340-12-353-8152
Multiple Eye Pad

123538152
16001472: RNCC: 3 | RNVC: 2

11 May 2001

5340-12-373-6542
Retaining Strap

123736542
X00012632: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-12-313-0412
Rim Lock Set

123130412
05608682: RNCC: 3 | RNVC: 9

1 Mar 1988

5340-12-360-4782
Cushioning Pad

123604782
10260406: RNCC: 3 | RNVC: 2
10260406: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-365-8705
Spring Tension Clip

123658705
0008050025: RNCC: 3 | RNVC: 2

15 Feb 2005

5340-12-366-0613
Angle Bracket

123660613
NN31477P01: RNCC: 3 | RNVC: 2

4 Mar 2005

5340-12-334-8571
Hasp Staple

123348571
889: RNCC: 3 | RNVC: 2
0745110152: RNCC: 5 | RNVC: 2

28 Jun 1994

5340-12-198-8874
Spring Tension Clip

121988874
8379930025: RNCC: 3 | RNVC: 2

9 Mar 1984

5340-12-373-2099
Nonmetallic Bumper

123732099
EE-M0073-12: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-12-339-7699
Lock-Release Lever

123397699
SK2506-22: RNCC: 3 | RNVC: 2
2490550: RNCC: 5 | RNVC: 2
5000821594: RNCC: 5 | RNVC: 2
SK2506-22: RNCC: 5 | RNVC: 2

15 Jan 1996

5340-12-370-0510
Retaining Strap

123700510
GM90203-16: RNCC: 3 | RNVC: 2

11 Sep 2006

5340-12-166-9371
Dust And Moisture Seal Protective Cap

121669371
30-79350-5095: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-12-309-2599
Spring Tension Clip

123092599
KM.S01-211110.003: RNCC: 3 | RNVC: 2

7 Jan 1987

5340-12-353-8606
Double Angle Bracket

123538606
J92220344-001: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-356-6252
Mounting Plate

123566252
028013124: RNCC: 3 | RNVC: 2
496-0177-01-00-004: RNCC: 5 | RNVC: 2
028013124: RNCC: 5 | RNVC: 9

18 Mar 2002

5340-12-176-3211
Loop Clamp

121763211
PAN4264-14: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-134-5219
Escutcheon Plate

121345219
5565-06-06-07: RNCC: 3 | RNVC: 2
3444701: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-308-2926
Pad Eye

123082926
P-875164-003: RNCC: 3 | RNVC: 2
P875164-003: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-311-9985
Retaining Strap

123119985
F11-43344-0001: RNCC: 3 | RNVC: 2

9 Nov 1987

5340-12-190-0133
Lock-Release Lever

121900133
2300013-9710.00: RNCC: 2 | RNVC: 2
2300013-9710.00: RNCC: 3 | RNVC: 2
2300013-9710.00: RNCC: 5 | RNVC: 9
2300013-9710-00: RNCC: 5 | RNVC: 9
2300013-9710.00: RNCC: 5 | RNVC: 9

3 Nov 1981

5340-12-342-3998
Mounting Bracket

123423998
2300348-183022.000.0: RNCC: 3 | RNVC: 2
1570009: RNCC: 5 | RNVC: 2

3 Feb 1997

5340-12-145-5121
Nut And Bolt Locking Plate

121455121
1187009700000: RNCC: 3 | RNVC: 2
D187000-30-1: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-7690
Loop Clamp

127017690
VG95211-ML-127017690: RNCC: 2 | RNVC: 2
5.12.7702.8005.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-357-6186
Access Cover

123576186
3000008-207220.07.0: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-359-9329
Lock Bolt

123599329
2500261-187980.005.0: RNCC: 2 | RNVC: 2
2500261-187980.005.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-701-6946
Mending Plate

127016946
VG95211-ML-127016946: RNCC: 2 | RNVC: 2
5.12.7222.1000.04: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-303-2629
Angle Bracket

123032629
P-886749-001: RNCC: 3 | RNVC: 2
P886749-001: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-197-7004
Mending Plate

121977004
P-295631-007: RNCC: 3 | RNVC: 2
P295631-007: RNCC: 5 | RNVC: 2

15 Nov 1983

5340-12-166-0446
Loop Clamp

121660446
100429-31010.14.0: RNCC: 2 | RNVC: 2
100429-31010.14.0: RNCC: 3 | RNVC: 2
100429-31010-14-0: RNCC: 5 | RNVC: 2
100429-31010-14-0: RNCC: 5 | RNVC: 9

29 Jul 1976

5340-12-381-1789
Spring Tension Clip

123811789
6.647-527.0: RNCC: 3 | RNVC: 2

18 Jan 2010

5340-12-356-6408
Dust And Moisture Seal Boot

123566408
N/S10-6/310/7: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-197-1043
Tubular Fairlead

121971043
5801903-0000.04: RNCC: 2 | RNVC: 2
5801903-0000.04: RNCC: 3 | RNVC: 2

20 Sep 1983

5340-12-197-3329
Handwheel

121973329
NO PRIMARY REF 12-197-3329: RNCC: 3 | RNVC: 2
200X22KDIN956: RNCC: 5 | RNVC: 9
DIN956-200X22K: RNCC: 5 | RNVC: 9

13 Oct 1983

5340-12-196-8329
Spring Tension Clip

121968329
588.70-510100-005: RNCC: 3 | RNVC: 2

23 Aug 1983

5340-12-176-9816
Retaining Strap

121769816
PAN4286-1-63: RNCC: 3 | RNVC: 2

3 Jan 1979

5340-12-350-4377
Section Block Clamp

123504377
JN0413E22: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-359-0157
Mounting Bracket

123590157
1120-80156.06: RNCC: 3 | RNVC: 2

10 Dec 2002

5340-12-178-3676
Webbing Strap

121783676
T10721: RNCC: 3 | RNVC: 2
T10721: RNCC: 5 | RNVC: 9

17 Apr 1979

5340-12-317-1667
Angle Bracket

123171667
C249-A11-C56: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-12-373-9642
Latch Bar

123739642
2800-20200: RNCC: 3 | RNVC: 2

3 Jan 2008

5340-12-356-5974
Mounting Bracket

123565974
2125-126010.03B: RNCC: 2 | RNVC: 2
2125-126010.03B: RNCC: 3 | RNVC: 2

14 Mar 2002

5340-12-335-3454
Handle Grip

123353454
6700018-202200.02: RNCC: 2 | RNVC: 2
6700018-202200.02: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-12-194-6588
Pad Eye

121946588
DIN15313-A14-ST37: RNCC: 2 | RNVC: 2
A14DIN15313ST37: RNCC: 5 | RNVC: 2

25 Nov 1982

5340-12-321-2653
Electrical-Mechanical Equipment Post

123212653
5801846-12.002: RNCC: 2 | RNVC: 2
5801846-12.002: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-12-326-7786
Nonmetallic Bumper

123267786
PLATTE 20X20X1 MM.NR70: RNCC: 3 | RNVC: 2
NR70-20X20X1MM: RNCC: 3 | RNVC: 2

24 Oct 1991

5340-12-703-3263
Butt Hinge

127033263
VG95211-ML-127033263: RNCC: 2 | RNVC: 2
5.12.8402.0066.98: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-172-1604
Catch Strike

121721604
2360-189410.04.0: RNCC: 2 | RNVC: 2
2360-189410-04-0: RNCC: 5 | RNVC: 2
2360-189410.04.0: RNCC: 5 | RNVC: 2
2360-189410.04.0: RNCC: 5 | RNVC: 2
2360-189410.04.0: RNCC: 5 | RNVC: 9
2360-189410-04-0: RNCC: 5 | RNVC: 9

27 Dec 1977

5340-12-365-5797
Angle Bracket

123655797
J28230230-001: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-310-8565
Double Angle Bracket

123108565
61114-041000.01.0: RNCC: 2 | RNVC: 2
61114-041000-01-0: RNCC: 5 | RNVC: 9

2 Jul 1987

5340-12-301-4145
Retaining Band

123014145
R23592: RNCC: 3 | RNVC: 2
R23592: RNCC: 5 | RNVC: 9

11 Oct 1984

5340-12-302-9244
Clamp Bolt Assembly

123029244
C42080-A26-B50: RNCC: 2 | RNVC: 2
C42080-A26-B50: RNCC: 3 | RNVC: 2

8 Feb 1985

5340-12-701-9024
Loop Clamp

127019024
VG95211-ML-127019024: RNCC: 2 | RNVC: 2
N1119-227: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-191-7420
Angle Bracket

121917420
65.7725.010.01: RNCC: 3 | RNVC: 2
65-7725-010-01: RNCC: 5 | RNVC: 2

1 Mar 1982

5340-12-700-5627
Filler Opening Cap

127005627
VG95211-ML-127005627: RNCC: 2 | RNVC: 2
APS-6602-2733: RNCC: 3 | RNVC: 2
0503300098589: RNCC: 5 | RNVC: 2

24 Sep 1992

5340-12-380-6129
Swivel Caster

123806129
LH-POEV160K-FI: RNCC: 3 | RNVC: 2

12 Nov 2009

5340-12-322-3282
Access Cover

123223282
SE2662-2B: RNCC: 3 | RNVC: 2
91700985: RNCC: 5 | RNVC: 2

10 Aug 1990

5340-12-316-8262
Angle Bracket

123168262
2300279-190110.011: RNCC: 1 | RNVC: 2
9872447: RNCC: 3 | RNVC: 2
2300279-190110.011: RNCC: 3 | RNVC: 2
2300279-190110.011: RNCC: 5 | RNVC: 9
9872447: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-322-9802
Dust And Moisture Seal Protective Cap

123229802
198 7121 00: RNCC: 3 | RNVC: 2
PH80B-23: RNCC: 5 | RNVC: 2
198712100: RNCC: 5 | RNVC: 2

15 Oct 1990

5340-12-371-2930
Filler Opening Cap

123712930
00154-026-000: RNCC: 3 | RNVC: 2

9 Mar 2007

5340-12-354-8306
Mechanical Stop

123548306
5400051-352030.01: RNCC: 2 | RNVC: 2
5400051-352030.01: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-702-1994
Mounting Bracket

127021994
VG95211-ML-127021994: RNCC: 2 | RNVC: 2
30.7210.470: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-0295
Angle Bracket

127020295
VG95211-ML-127020295: RNCC: 2 | RNVC: 2
22.7800.20: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-0631
Angle Bracket

127020631
VG95211-ML-127020631: RNCC: 2 | RNVC: 2
30.0600.0101.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-190-5966
Retaining Strap

121905966
JJ53608: RNCC: 3 | RNVC: 2

7 Dec 1981

5340-12-702-0636
Mounting Bracket

127020636
VG95211-ML-127020636: RNCC: 2 | RNVC: 2
30.0602.2110: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-143-8132
Retaining Strap

121438132
DIN72573-1X12-ST-VERZINKT: RNCC: 2 | RNVC: 2
DIN72573-1X12-ST-VERZINKT: RNCC: 3 | RNVC: 2
DIN72573-1X12-ST-VERZINKT: RNCC: 3 | RNVC: 2
DIN72573-1X12-ST-GALZN8: RNCC: 5 | RNVC: 2
1X12DIN72573STVERZINKT: RNCC: 5 | RNVC: 2
1X12DIN72573STVZK: RNCC: 5 | RNVC: 2
DIN72573-1X12-ST-GALZN8: RNCC: 5 | RNVC: 2
5128980112: RNCC: 5 | RNVC: 2
BSL1X12/72573VPE: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-190-4481
Rigid Caster

121904481
SK-EK-0252.040.02: RNCC: 3 | RNVC: 2
SKEK0252-040-02: RNCC: 5 | RNVC: 2

26 Nov 1981

5340-12-371-7016
Webbing Strap

123717016
MEL300-D1-018: RNCC: 3 | RNVC: 2

7 May 2007

5340-12-381-8777
Rigid Caster

123818777
V282/25R: RNCC: 3 | RNVC: 2
41236: RNCC: 5 | RNVC: 2
191630926: RNCC: 5 | RNVC: 2

13 Apr 2010

5340-12-334-0370
Dust And Moisture Seal Protective Cap

123340370
01TC34489: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-12-369-4348
Mounting Bracket

123694348
5832300840: RNCC: 3 | RNVC: 2

4 Jul 2006

5340-12-362-7345
Mounting Plate

123627345
S533M5003230: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-12-353-9534
Spring Loaded Cylinder Fastener

123539534
591012-8050.000: RNCC: 3 | RNVC: 2
591012-8050.000: RNCC: 5 | RNVC: 2
591012-8050.000: RNCC: 5 | RNVC: 9

22 May 2001

5340-12-166-1984
Furniture Leg Tip

121661984
0435285: RNCC: 3 | RNVC: 2
043.5285: RNCC: 5 | RNVC: 2
KBJ90401: RNCC: 5 | RNVC: 2
KZ0435285: RNCC: 5 | RNVC: 2

12 Aug 1976

5340-12-349-7436
Retaining Strap

123497436
T290M2202258: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-304-7171
Resilient Mount

123047171
DIN95363-B25X20-M6X9-NR55ST-GAL: RNCC: 2 | RNVC: 2
C40165-A373-C32: RNCC: 5 | RNVC: 2
C40165A373C32: RNCC: 5 | RNVC: 2
RELGH373,T32: RNCC: 5 | RNVC: 2
510021-M6X9.NR55.ST-VERNICKELT: RNCC: 5 | RNVC: 2
VG95363-B25X20-M6X9-NR55ST-GALNI: RNCC: 5 | RNVC: 9

14 Aug 1985

5340-12-158-1303
Case Corner

121581303
31082: RNCC: 3 | RNVC: 2
5800357-800000-38: RNCC: 5 | RNVC: 9
5800357-800000.38: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-189-4633
Manual Control Handle

121894633
06410-4123-RAL6031-F9: RNCC: 3 | RNVC: 2
6L.3783.003.A001-RAL6031-F9: RNCC: 5 | RNVC: 2
641-412: RNCC: 5 | RNVC: 9
NLM641-1412-RAL6014: RNCC: 5 | RNVC: 9
NLM641-1412-RAL6031-F9: RNCC: 5 | RNVC: 9
NLM6410-1412-RAL6031-F9: RNCC: 5 | RNVC: 9
6L.3783.003.00-182143: RNCC: 5 | RNVC: 9
NLM641-412RAL6014: RNCC: 5 | RNVC: 9
6L.3783.003.A001: RNCC: 5 | RNVC: 9
6L3783-003-182143: RNCC: 5 | RNVC: 9

29 Sep 1981

5340-12-148-2547
Webbing Strap

121482547
C39103-Z1-C5: RNCC: 3 | RNVC: 2
C39103Z1C5: RNCC: 5 | RNVC: 2
5340-0002-350MM: RNCC: 5 | RNVC: 9
5340-002-350MM: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-174-4057
Access Cover

121744057
7881953: RNCC: 3 | RNVC: 2
7881-953: RNCC: 5 | RNVC: 2
1000025-551100-01: RNCC: 5 | RNVC: 9
1000025-551100.01: RNCC: 5 | RNVC: 9

29 Jun 1978

5340-12-329-8745
Tee Hinge

123298745
160-82182: RNCC: 3 | RNVC: 2
15160-82182: RNCC: 5 | RNVC: 2
160-82182: RNCC: 5 | RNVC: 9

8 Oct 1992

5340-12-701-7661
Angle Bracket

127017661
VG95211-ML-127017661: RNCC: 2 | RNVC: 2
5.12.7702.0500.29: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-352-2750
Access Cover

123522750
2500238-060106.000.0: RNCC: 2 | RNVC: 2
2500238-060106.000.0: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-12-192-6154
Clamp Bolt Assembly

121926154
020630-522000: RNCC: 2 | RNVC: 2
020630-522000: RNCC: 3 | RNVC: 2
020208-521100: RNCC: 5 | RNVC: 9
020208-521100: RNCC: 5 | RNVC: 9
07-26-17-0: RNCC: 5 | RNVC: 9

10 May 1982

5340-12-192-6162
Handle Grip

121926162
42904-512000.06: RNCC: 2 | RNVC: 2
42904-512000.06: RNCC: 3 | RNVC: 2
08-01-95-0: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-359-6794
Access Cover

123596794
2500261-182401.000.0: RNCC: 2 | RNVC: 2
2500261-182401.000.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-188-7848
Butt Hinge Leaf

121887848
2500075-191030.002.0: RNCC: 2 | RNVC: 2
2500075-191030.002.0: RNCC: 3 | RNVC: 2
2500075-191030-002-0: RNCC: 5 | RNVC: 9
2500075-191030-002-0: RNCC: 5 | RNVC: 9
2500075-191030.002.0: RNCC: 5 | RNVC: 9

29 Jul 1981

5340-12-323-4783
Casement Fastener

123234783
1208 0943: RNCC: 3 | RNVC: 2
12080943KZ0111-90: RNCC: 5 | RNVC: 2
3.602.9.649.003.6: RNCC: 5 | RNVC: 2

29 Nov 1990

5340-12-198-8548
Catch Strike

121988548
VG95136B2-38X28-TEIL 1: RNCC: 2 | RNVC: 2
VG95136B2-38X28-TEIL 1: RNCC: 3 | RNVC: 2
602K0208-001-00.4: RNCC: 3 | RNVC: 2
602K0208-1: RNCC: 5 | RNVC: 2
VG95136B2-38X28-TEIL 1: RNCC: 5 | RNVC: 9

3 Mar 1984

5340-12-374-8670
Access Cover

123748670
SK976-172940.000.0: RNCC: 3 | RNVC: 2
1781417: RNCC: 5 | RNVC: 9

1 Apr 2008

5340-12-346-9329
Mending Plate

123469329
HRL-2-DP: RNCC: 3 | RNVC: 2
909624003: RNCC: 5 | RNVC: 2

29 Sep 1998

5340-12-354-0401
Double Angle Bracket

123540401
J92224343-003: RNCC: 3 | RNVC: 2

30 May 2001

5340-12-301-8860
Angle Bracket

123018860
20-4240-035: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-314-5165
Spring Holder

123145165
738E08330: RNCC: 3 | RNVC: 2

15 Jul 1988

5340-12-394-6446
Mounting Plate

123946446
S880M9202220: RNCC: 3 | RNVC: 2

2 Jan 2014

5340-12-393-1352
Retaining Strap

123931352
9826C10: RNCC: 3 | RNVC: 2
9826: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-12-326-1382
Mounting Plate

123261382
272.359.136: RNCC: 3 | RNVC: 2
272.359 136: RNCC: 5 | RNVC: 9

12 Aug 1991

5340-12-326-1336
Butt Hinge Leaf

123261336
307.601-60100.06: RNCC: 3 | RNVC: 2

12 Aug 1991

5340-12-362-1714
Mounting Plate

123621714
00M0230000032011: RNCC: 3 | RNVC: 2

20 Jan 2004

5340-12-176-3200
Mending Plate

121763200
CF419328: RNCC: 3 | RNVC: 2
CF 419 328: RNCC: 5 | RNVC: 2
CF419328: RNCC: 5 | RNVC: 2
CF419328: RNCC: 5 | RNVC: 2
CF 419 328: RNCC: 5 | RNVC: 2

23 Nov 1978

5340-12-311-9092
Mending Plate

123119092
2300074-5521.01: RNCC: 2 | RNVC: 2
2300074-5521.01: RNCC: 3 | RNVC: 2
2300074-5521.01: RNCC: 5 | RNVC: 9

29 Oct 1987

5340-12-313-9134
Mounting Bracket

123139134
4621-0002.04: RNCC: 3 | RNVC: 2
208769: RNCC: 5 | RNVC: 2

19 May 1988

5340-12-308-1914
Case Corner

123081914
33A47-0026-02.007: RNCC: 3 | RNVC: 2
L9,5X6,5X175SN2953-KS: RNCC: 5 | RNVC: 9

12 Sep 1986

5340-12-365-5852
Double Angle Bracket

123655852
J29120104-402: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-700-8677
Loop Clamp

127008677
VG95211-ML-127008677: RNCC: 2 | RNVC: 2
155N464-22: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-372-6717
Butt Hinge

123726717
HDWN68418-50-MS-VCR: RNCC: 3 | RNVC: 2

9 Aug 2007

5340-12-313-4477
Resilient Mount

123134477
RD215HD-MN55: RNCC: 3 | RNVC: 2

31 Mar 1988

5340-12-196-5928
Spring Tension Clip

121965928
C22451-A1000-C19: RNCC: 3 | RNVC: 2
C22451A1000C19: RNCC: 5 | RNVC: 2

20 Jul 1983

5340-12-326-0161
Access Cover

123260161
325.13.600.03: RNCC: 3 | RNVC: 2
91703893: RNCC: 5 | RNVC: 2
325-13-100-24: RNCC: 5 | RNVC: 9
325.13.100.24: RNCC: 5 | RNVC: 9

30 Jul 1991

5340-12-345-2258
Loop Clamp

123452258
0562 0301 112: RNCC: 3 | RNVC: 2
51-97440-0083: RNCC: 5 | RNVC: 2
51974400083: RNCC: 5 | RNVC: 2
5000609753: RNCC: 5 | RNVC: 2
F300 0T 003 2592: RNCC: 6 | RNVC: 9

12 Feb 1998

5340-12-302-1748
Dust And Moisture Seal Protective Cap

123021748
SP-006-5-74: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-094-4136

5340-12-335-8316
Spacing Threaded Standoff

123358316
8513548.008: RNCC: 3 | RNVC: 2
0851 3548.008: RNCC: 3 | RNVC: 2
851 3548 FB T8: RNCC: 5 | RNVC: 2

20 Sep 1994

5340-12-318-8009
Spring Tension Clip

123188009
114544: RNCC: 3 | RNVC: 2

17 Aug 1989

5340-12-178-3006
Magnetic Catch

121783006
C324-A16-C140: RNCC: 2 | RNVC: 2
C324A16C140: RNCC: 3 | RNVC: 2
C324-A16-C140: RNCC: 5 | RNVC: 2
C324A16C140: RNCC: 5 | RNVC: 2
C324-A16-C140: RNCC: 5 | RNVC: 2

12 Apr 1979

5340-12-361-3334
Angle Bracket

123613334
51081400042: RNCC: 3 | RNVC: 2
51.08140-0042: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-199-3286
Nonmetallic Bumper

121993286
3102420066: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-12-375-5536
Angle Bracket

123755536
L521M3122101: RNCC: 3 | RNVC: 2

12 Jun 2008

5340-12-350-4340
Section Block Clamp

123504340
JN0413CCCCC66: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-333-2152

5340-12-179-1287
Mounting Bracket

121791287
5801111-1111-007: RNCC: 3 | RNVC: 2
5801111-1111.007: RNCC: 5 | RNVC: 2

8 Jun 1979

5340-12-185-3230
Double Angle Bracket

121853230
8454865: RNCC: 3 | RNVC: 2
1105155: RNCC: 5 | RNVC: 2
1105-155: RNCC: 5 | RNVC: 2

30 Sep 1980

5340-12-329-5712
Mounting Plate

123295712
5801338-014.004: RNCC: 3 | RNVC: 2

2 Sep 1992

5340-12-325-5936
Nonmetallic Bumper

123255936
330706-4004.000: RNCC: 3 | RNVC: 2
330706-4004-000: RNCC: 5 | RNVC: 2
330706-4004.000: RNCC: 5 | RNVC: 9

20 Jun 1991

5340-12-183-3192
Mending Plate

121833192
23111-3843.01: RNCC: 2 | RNVC: 2
23111-3843.01: RNCC: 3 | RNVC: 2
1119484: RNCC: 5 | RNVC: 9
23111-3843-01: RNCC: 5 | RNVC: 9
23111-3843.01: RNCC: 5 | RNVC: 9
23111-3843-01: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-12-384-1463
Loop Clamp

123841463
DIN3016-1-A2-22-22X15-W1-2: RNCC: 2 | RNVC: 2

26 Jan 2011

5340-12-182-8058
Loop Clamp

121828058
DIN3016-1-D2-12-16X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-12-16X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.12-16/15: RNCC: 3 | RNVC: 2
4219103012: RNCC: 5 | RNVC: 2
RSGU1100-12-16-15: RNCC: 5 | RNVC: 2
RSGU1100.12-16/15: RNCC: 5 | RNVC: 2
DIN3016-D2-12-16X15-W1-2: RNCC: 5 | RNVC: 9

27 Feb 1980

5340-12-344-4237
Angle Bracket

123444237
A-616743-047: RNCC: 3 | RNVC: 2
A616743-047: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-314-6097
Electrical-Mechanical Equipment Post

123146097
512214-0333.000: RNCC: 3 | RNVC: 2
512214-0333: RNCC: 5 | RNVC: 2

22 Jul 1988

5340-12-169-9387
Mending Plate

121699387
1400003-10000-24: RNCC: 3 | RNVC: 2
1400003-10000-24: RNCC: 5 | RNVC: 9
1400003-10000.24: RNCC: 5 | RNVC: 9

15 Jun 1977

5340-12-176-1883
Loop Clamp

121761883
29 821-001: RNCC: 3 | RNVC: 2
29821-001: RNCC: 5 | RNVC: 2

13 Nov 1978

5340-12-330-9251
Angle Bracket

123309251
480-7345-06-00-00-13: RNCC: 3 | RNVC: 2
480/7345-06-00-00/13: RNCC: 5 | RNVC: 2

26 Feb 1993

5340-12-342-5698
Spacing Threaded Standoff

123425698
35629257: RNCC: 3 | RNVC: 2
62.7000.410.03-A001: RNCC: 3 | RNVC: 2
62.7000.410.03: RNCC: 5 | RNVC: 2
830 517: RNCC: 5 | RNVC: 2

28 Feb 1997

5340-12-186-8397
Dust And Moisture Seal Protective Plug

121868397
015-236-10: RNCC: 3 | RNVC: 2
514132748-10: RNCC: 5 | RNVC: 2
3800015-40-10: RNCC: 5 | RNVC: 9

11 Feb 1981

5340-12-172-3988
Handle Grip

121723988
1361035-13510-00: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-12-389-2673
Quick Release Plunger

123892673
03092-2308: RNCC: 3 | RNVC: 2

14 Jun 2012

5340-12-169-5197
Angle Bracket

121695197
3604280243: RNCC: 3 | RNVC: 2
A3604280243: RNCC: 5 | RNVC: 2

24 May 1977

5340-12-308-3472
Retaining Strap

123083472
30.1843-12.4: RNCC: 3 | RNVC: 2
12030876RY0112-90: RNCC: 5 | RNVC: 2
1203 0876: RNCC: 5 | RNVC: 2
3.418.0.977.003.4: RNCC: 5 | RNVC: 9
30.1843-12.4: RNCC: 5 | RNVC: 9

1 Oct 1986

5340-12-304-4814
Angle Bracket

123044814
5801434-500000.01: RNCC: 2 | RNVC: 2
5801434-500000.01: RNCC: 3 | RNVC: 2
5801434-500000.01: RNCC: 5 | RNVC: 9

23 Jul 1985

5340-12-313-6186
Resilient Mount

123136186
DIN95363-B25X25-NR65ST: RNCC: 4 | RNVC: 1
5800.7298: RNCC: 5 | RNVC: 2
409061836: RNCC: 5 | RNVC: 2
811.000.025.025.06X20.NR65.ST: RNCC: 5 | RNVC: 2
81100-25X25-M6X20.NR65.ST: RNCC: 5 | RNVC: 2
VG95363-B25X25-NR65ST: RNCC: 5 | RNVC: 9

20 Apr 1988

5340-12-164-4666
Clamping Catch

121644666
22.1077.051.00: RNCC: 3 | RNVC: 2
22.1077.051.00: RNCC: 5 | RNVC: 2
22-1077-051-00GZ: RNCC: 5 | RNVC: 2
5801313-051: RNCC: 5 | RNVC: 9
22-1077-051-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-183-2038
Mounting Bracket

121832038
C22121-A69-C1: RNCC: 3 | RNVC: 2
C22121A69C1: RNCC: 5 | RNVC: 2

25 Mar 1980

5340-12-701-5785
Mounting Bracket

127015785
VG95211-ML-127015785: RNCC: 2 | RNVC: 2
5.12.6405.0330.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-314-8476
Mounting Bracket

123148476
P-146243-010: RNCC: 3 | RNVC: 2
P146243-010: RNCC: 5 | RNVC: 2

17 Aug 1988

5340-12-701-8461
Loop Clamp

127018461
VG95211-ML-127018461: RNCC: 2 | RNVC: 2
5152A-8: RNCC: 3 | RNVC: 2
0500840291159: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-190-4707
Lock-Release Lever

121904707
03112000: RNCC: 3 | RNVC: 2
03112: RNCC: 5 | RNVC: 2
03112.00: RNCC: 5 | RNVC: 2

30 Nov 1981

5340-12-329-0210
Webbing Strap

123290210
2950-510.00: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-12-091-3530

5340-12-374-7371
Manual Control Handle

123747371
GN500-80-M8-GR: RNCC: 3 | RNVC: 2

12 Mar 2008

5340-12-353-9921
Rod End Clevis

123539921
AFG072344-01: RNCC: 3 | RNVC: 2

28 May 2001

5340-12-352-2974
Mounting Plate

123522974
VG95211-ML-123522974: RNCC: 2 | RNVC: 2
160-88411-02: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-150-8459
Loop Clamp

121508459
8379951201: RNCC: 3 | RNVC: 2
4799-031: RNCC: 5 | RNVC: 2
4799031: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-3779
Spring Tension Clip

121963779
1901321202: RNCC: 3 | RNVC: 2
0298 5062: RNCC: 5 | RNVC: 2
02985062EY8976-22: RNCC: 5 | RNVC: 2
2985062: RNCC: 5 | RNVC: 2

30 Jun 1983

5340-12-122-8876

5340-12-389-5575
Flush Lock

123895575
105-23334: RNCC: 3 | RNVC: 2

19 Jul 2012

5340-12-198-5014
Double Angle Bracket

121985014
160-744408: RNCC: 3 | RNVC: 2
160-744408: RNCC: 5 | RNVC: 9

2 Feb 1984

5340-12-362-1583
Mounting Bracket

123621583
2300471-209120.00.0: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-12-343-5520
Manual Control Lever

123435520
5092-277: RNCC: 3 | RNVC: 2
F300 0T 022 4982: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-12-387-7126
Bumper

123877126
S533M50X1009: RNCC: 1 | RNVC: 2
1206-0080-00: RNCC: 3 | RNVC: 2

26 Jan 2012

5340-12-357-7962
Handle Grip

123577962
1659-182500.000.0: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-12-338-9589
Electronic Equipment Hardware Kit

123389589
8 695 120 741: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-12-388-5593
Swivel Caster

123885593
LE-PTH 160K-FI: RNCC: 3 | RNVC: 2
LE-PTH 160K-FI: RNCC: 5 | RNVC: 2

30 Mar 2012

5340-12-368-4773
Access Cover

123684773
51081010425: RNCC: 3 | RNVC: 2
51.08101-0425: RNCC: 5 | RNVC: 2

15 Mar 2006

5340-12-024-7315

5340-12-094-0957

5340-12-348-0796
Nonmetallic Bumper

123480796
4613520165: RNCC: 3 | RNVC: 2

9 Apr 1999

5340-12-199-8762
Quick Release Plunger

121998762
614.6276: RNCC: 3 | RNVC: 2
6146276: RNCC: 5 | RNVC: 2

9 Jun 1984

5340-12-177-5497
Nonmetallic Bumper

121775497
0009876540: RNCC: 3 | RNVC: 2

5 Feb 1979

5340-12-094-5190

5340-12-158-7471
Plain Solid Disk

121587471
8371840276: RNCC: 3 | RNVC: 2
4798-665: RNCC: 5 | RNVC: 2
4798665: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-188-3508
Resilient Mount

121883508
H64-BAM-40: RNCC: 3 | RNVC: 2
H64-BAM-40: RNCC: 5 | RNVC: 9
H64BAM40: RNCC: 5 | RNVC: 9

2 Jul 1981

5340-12-164-2994
Dust And Moisture Seal Protective Plug

121642994
2360-130000.31.0: RNCC: 2 | RNVC: 2
2360-130000.31.0: RNCC: 3 | RNVC: 2
2360-130000.31.0: RNCC: 5 | RNVC: 2
2360-130000-31-0: RNCC: 5 | RNVC: 9
2360-130000.31.0: RNCC: 5 | RNVC: 9
2360-130000-31-0: RNCC: 5 | RNVC: 9
2360-130000-31-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-300-8214
Pad Eye

123008214
2-32730-11: RNCC: 3 | RNVC: 2

1 Sep 1984

5340-12-189-4085
Bow Handle

121894085
72L18-2-1AB: RNCC: 3 | RNVC: 2
61E22-1A: RNCC: 5 | RNVC: 2
5L.3741.009.04: RNCC: 5 | RNVC: 2

24 Sep 1981

5340-12-325-0499
Mounting Plate

123250499
702-731190-000-0: RNCC: 3 | RNVC: 2

26 Apr 1991

5340-12-378-5619
Mending Plate

123785619
2300461-187713.003.0: RNCC: 2 | RNVC: 2
2300461-187713.003.0: RNCC: 3 | RNVC: 2

22 Apr 2009

5340-12-702-5350
Mounting Bracket

127025350
VG95211-ML-127025350: RNCC: 2 | RNVC: 2
5.51.7204.0410.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-163-9430
Hand Crank

121639430
VG85087-A-63X7-GT: RNCC: 2 | RNVC: 2
VG85087-A-63X7-GT: RNCC: 3 | RNVC: 2
VG85087-A-63X7-GT: RNCC: 3 | RNVC: 2
VG85087-A-63X7-GT: RNCC: 3 | RNVC: 9
A63X7VG85087GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-4416
Pad Eye

123164416
7.01.13: RNCC: 3 | RNVC: 2
0701130: RNCC: 5 | RNVC: 2
22-04.77: RNCC: 5 | RNVC: 2

18 Jan 1989

5340-12-702-5481
Mounting Plate

127025481
VG95211-ML-127025481: RNCC: 2 | RNVC: 2
5.51.7211.1130.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-194-9387
Double Angle Bracket

121949387
66.3851.210.01-A001: RNCC: 3 | RNVC: 2
161544: RNCC: 5 | RNVC: 2
66-3851-210-01A001: RNCC: 5 | RNVC: 9

21 Dec 1982

5340-12-174-0248
Angle Bracket

121740248
8439894: RNCC: 3 | RNVC: 2
0018-958: RNCC: 5 | RNVC: 2
0018958: RNCC: 5 | RNVC: 2

31 May 1978

5340-12-388-2325
Mounting Plate

123882325
F1.1697-00-01-12.00-11: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-12-181-3619
Electrical-Mechanical Equipment Post

121813619
VG95148C6XM3X52-ST-B3C: RNCC: 2 | RNVC: 2
VG95148C6XM3X52-ST-B3C: RNCC: 3 | RNVC: 2
SH9500E545: RNCC: 3 | RNVC: 2
1200072-013515.545: RNCC: 5 | RNVC: 9
SH9500E545: RNCC: 5 | RNVC: 9
SH9500E545: RNCC: 5 | RNVC: 9
1200072-013515-545: RNCC: 5 | RNVC: 9

19 Nov 1979

5340-12-323-4766
Flush Lock

123234766
2416-LINKS: RNCC: 3 | RNVC: 2
2416LH: RNCC: 5 | RNVC: 2

29 Nov 1990

5340-12-194-6355
Double Angle Bracket

121946355
66.3851.103.04-A001: RNCC: 3 | RNVC: 2
164050: RNCC: 5 | RNVC: 2
66-3851-103-04A001: RNCC: 5 | RNVC: 9

23 Nov 1982

5340-12-319-9122
Electrical-Mechanical Equipment Post

123199122
2653-073381.02: RNCC: 2 | RNVC: 2
2653-073381.02: RNCC: 3 | RNVC: 2

16 Nov 1989

5340-12-186-3257
Nonmetallic Bumper

121863257
1400045-1000.03: RNCC: 2 | RNVC: 2
1400045-1000.03: RNCC: 3 | RNVC: 2
MI6097-1000-03: RNCC: 3 | RNVC: 2
1400045-1000-03: RNCC: 5 | RNVC: 9
1400045-1000.03: RNCC: 5 | RNVC: 9

17 Dec 1980

5340-12-146-6222
Nonmetallic Bumper

121466222
23110-4139.04: RNCC: 2 | RNVC: 2
23110-4139.04: RNCC: 3 | RNVC: 2
23110-4139-04: RNCC: 5 | RNVC: 2
23110-4139-04: RNCC: 5 | RNVC: 9
23110-4139-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-390-6427
Section Block Clamp

123906427
316936: RNCC: 3 | RNVC: 2
2170-07-15-04/39: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-12-305-7761
Mending Plate

123057761
C62122-A89-C47: RNCC: 3 | RNVC: 2

11 Dec 1985

5340-12-172-7561
Loop Clamp

121727561
23290-181551: RNCC: 2 | RNVC: 2
23290-181551: RNCC: 5 | RNVC: 2

20 Feb 1978

5340-12-356-8178
Angle Bracket

123568178
ED88-0100-01001-101: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-12-307-3652
Clamping Catch

123073652
6100129-20200: RNCC: 2 | RNVC: 2
3781151: RNCC: 3 | RNVC: 2
3781151KE8935-37: RNCC: 5 | RNVC: 2

10 Jun 1986

5340-12-315-1201
Resilient Mount Adapter

123151201
02466230: RNCC: 3 | RNVC: 2
246 6230: RNCC: 5 | RNVC: 2
2466231UE5095-04: RNCC: 5 | RNVC: 2

17 Sep 1988

5340-12-198-6773
Elbow Catch

121986773
00-7331-0495/01: RNCC: 2 | RNVC: 2

17 Feb 1984

5340-12-182-1609
Retaining Strap

121821609
2300033-430000-11: RNCC: 2 | RNVC: 2
2300033-430000-11: RNCC: 5 | RNVC: 9
2300033-430000.11: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-353-7173
Multiple Angle Bracket

123537173
J92222289-001: RNCC: 3 | RNVC: 2

2 May 2001

5340-12-365-1603
Spacing Threaded Standoff

123651603
536514-0301.000: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-193-6355
Retaining Strap

121936355
DIN3016-1-F1-30X25-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-30X25-W1-2: RNCC: 3 | RNVC: 2
RSGU2.30/25: RNCC: 3 | RNVC: 2
9420025030: RNCC: 5 | RNVC: 2
RSGU1200.30/25: RNCC: 5 | RNVC: 2
DIN3016-F1-30X25-W1-2: RNCC: 5 | RNVC: 9
942 0025 030: RNCC: 5 | RNVC: 9
VG95931-F30X25-W1: RNCC: 5 | RNVC: 9
VG95931F30X25W1: RNCC: 5 | RNVC: 9

13 Aug 1982

5340-12-197-7379
Butt Hinge Leaf

121977379
P-296877-407: RNCC: 3 | RNVC: 2
P296877-407: RNCC: 5 | RNVC: 2

18 Nov 1983

5340-12-348-9097
Mounting Bracket

123489097
245/7383-02-44-00: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-321-3004
Mounting Plate

123213004
00166-018-002: RNCC: 3 | RNVC: 2
LV6/25: RNCC: 5 | RNVC: 2
166-18-02: RNCC: 5 | RNVC: 9

30 Apr 1990

5340-12-379-7958
Corner Brace

123797958
2452-60700: RNCC: 3 | RNVC: 2

2 Sep 2009

5340-12-020-7461

5340-12-362-1564
Access Cover

123621564
063 654: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-12-329-4620
Helical Compression Spring Seat

123294620
43273: RNCC: 3 | RNVC: 2
1-1378-6-4: RNCC: 5 | RNVC: 2
1043273: RNCC: 5 | RNVC: 2
043273: RNCC: 5 | RNVC: 9

21 Aug 1992

5340-12-024-8287

5340-12-387-4332
Installations Guard

123874332
S533M0064800: RNCC: 3 | RNVC: 2

15 Dec 2011

5340-12-313-3366
Angle Bracket

123133366
5801699-8121.00: RNCC: 2 | RNVC: 2
5801699-8121.00: RNCC: 3 | RNVC: 2
5801699-8121.00: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-313-3589
Doorstop

123133589
2406-MS: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-12-315-6007
Loop Clamp

123156007
0289 5221: RNCC: 3 | RNVC: 2
2895221: RNCC: 5 | RNVC: 2
2895221KZ0704-79: RNCC: 5 | RNVC: 2

11 Nov 1988

5340-12-348-9265
Mounting Bracket

123489265
245/7383-02-22-00: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-12-196-1196
Webbing Strap

121961196
GEWA502: RNCC: 3 | RNVC: 2
408-90.08.391-21: RNCC: 5 | RNVC: 2
408-90.08.391-21: RNCC: 5 | RNVC: 2
408-90.08.391-21E: RNCC: 5 | RNVC: 2
000-E6-50X2,5X2000-PE-RAL6031: RNCC: 6 | RNVC: 9

1 Jun 1983

5340-12-309-4476
Double Angle Bracket

123094476
1700014-13000.00: RNCC: 2 | RNVC: 2
501216: RNCC: 3 | RNVC: 2

26 Jan 1987

5340-12-346-1529
Handwheel

123461529
DIN950-125X14-AL-A3: RNCC: 2 | RNVC: 2

19 Jun 1998

5340-12-150-7297
Dust And Moisture Seal Protective Plug

121507297
59316-000-4: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-388-1996
Section Block Clamp

123881996
1030124-060220.003.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-197-5356
Rod End Clevis

121975356
V22.918.150000-03: RNCC: 3 | RNVC: 2
V22-918-150000-03: RNCC: 5 | RNVC: 2

28 Oct 1983

5340-12-178-2294
Friction Catch

121782294
C324-A16-B39: RNCC: 2 | RNVC: 2
C324A16B39: RNCC: 3 | RNVC: 2
C324-A16-B39: RNCC: 5 | RNVC: 2
C324A16B39: RNCC: 5 | RNVC: 2
C324-A16-B39: RNCC: 5 | RNVC: 2

9 Apr 1979

5340-12-340-6544
Seal Retaining Plate

123406544
5801984-200300.008.0: RNCC: 2 | RNVC: 2
5801984-200300.008.0: RNCC: 3 | RNVC: 2

18 May 1996

5340-12-348-9609
Caster Wheel

123489609
245/9713-02-15-00: RNCC: 3 | RNVC: 2

7 Sep 1999

5340-12-702-4278
Mounting Plate

127024278
VG95211-ML-127024278: RNCC: 2 | RNVC: 2
5.12.7702.0572.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-7573
Angle Bracket

127017573
VG95211-ML-127017573: RNCC: 2 | RNVC: 2
5.12.7617.8400.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-343-9761
Spacing Threaded Standoff

123439761
C41107-A467-C315: RNCC: 3 | RNVC: 2
35627048: RNCC: 3 | RNVC: 2
VG95148C5,5XM3X11,5-NRST: RNCC: 5 | RNVC: 2
C41107A467C315: RNCC: 5 | RNVC: 2

21 Aug 1997

5340-12-341-7654
Angle Bracket

123417654
160-75651-241: RNCC: 3 | RNVC: 2
160-75651241: RNCC: 5 | RNVC: 2
160-75651-241: RNCC: 5 | RNVC: 9

24 Oct 1996

5340-12-199-5147
Mending Plate

121995147
2300002-064000.002: RNCC: 2 | RNVC: 2
2300002-064000.002: RNCC: 3 | RNVC: 2
2300002-064000-002: RNCC: 5 | RNVC: 9
2300002-064000.002: RNCC: 5 | RNVC: 9

8 May 1984

5340-12-701-7686
Loop Clamp

127017686
VG95211-ML-127017686: RNCC: 2 | RNVC: 2
5.12.7702.8001.13: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-360-3419
Loop Clamp

123603419
DIN3016-1-E1-50X20-W1-2-NBR: RNCC: 2 | RNVC: 2

13 May 2003

5340-12-376-7112
Loop Clamp

123767112
RSGU1.20/20-W5-SILIKON: RNCC: 3 | RNVC: 2
09418328020: RNCC: 5 | RNVC: 2

30 Oct 2008

5340-12-339-6910
Webbing Strap

123396910
2500255-199720.000.0: RNCC: 2 | RNVC: 2
2500255-199720.000.0: RNCC: 3 | RNVC: 2

21 Dec 1995

5340-12-306-0682
Mending Plate

123060682
5801984-200800.005.0: RNCC: 2 | RNVC: 2
5801984-200800.005.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-354-5959
Blank Panel

123545959
VG95211-ML-123545959: RNCC: 2 | RNVC: 2
G10-67-212-10-0: RNCC: 3 | RNVC: 2

7 Aug 2001

5340-12-353-1535
Buckle

123531535
XX5199/25.200: RNCC: 3 | RNVC: 2

2 Feb 2001

5340-12-378-3350
Flush Bolt

123783350
2300232-828000.004.0: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-340-2897
Retaining Strap

123402897
2300298-972000.004.0: RNCC: 2 | RNVC: 2
2300298-972000.004.0: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-12-301-1951
Case Corner

123011951
1423-911.33(3): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-339-8542
Mounting Bracket

123398542
1.8526-3: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-12-369-9036
Spring Loaded Cylinder Fastener

123699036
4.042-877.0: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-12-377-3647
Mending Plate

123773647
4100037-981190.001: RNCC: 2 | RNVC: 2
4100037-981190.001: RNCC: 3 | RNVC: 2
4100037-981190.001: RNCC: 5 | RNVC: 9

13 Jan 2009

5340-12-186-9170
Spring Tension Clip

121869170
1713: RNCC: 3 | RNVC: 9

18 Feb 1981

5340-12-168-5584
Webbing Strap

121685584
T10723: RNCC: 3 | RNVC: 2
T10723: RNCC: 5 | RNVC: 9

22 Mar 1977

5340-12-311-8448
Angle Bracket

123118448
2300074-4156.01: RNCC: 2 | RNVC: 2
2300074-4156.01: RNCC: 3 | RNVC: 2
2300074-4156.01: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-328-1669
Access Cover

123281669
4616800407: RNCC: 3 | RNVC: 2

14 Apr 1992

5340-12-311-4232
Bow Handle

123114232
52.1819.021.04: RNCC: 3 | RNVC: 2
52.1819.021.04: RNCC: 5 | RNVC: 9

1 Sep 1987

5340-12-375-5833
Mounting Plate

123755833
L246M2028207: RNCC: 3 | RNVC: 2

16 Jun 2008

5340-12-394-0772
Dust And Moisture Seal Protective Cap

123940772
CTP40490P009: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-12-153-4117
Loop Clamp

121534117
5L3829-040-35: RNCC: 3 | RNVC: 2
1671310018: RNCC: 5 | RNVC: 2
5LV3829-040-35: RNCC: 5 | RNVC: 2
10-0200-40-35-9: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-703-3237
Mounting Bracket

127033237
VG95211-ML-127033237: RNCC: 2 | RNVC: 2
5.12.7020.1620.03: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-326-6094
Webbing Strap

123266094
79017/026-0780-0170: RNCC: 3 | RNVC: 2
79017/026-0780-0170: RNCC: 5 | RNVC: 9

14 Oct 1991

5340-12-357-2595
Angle Bracket

123572595
ED41-0600-00200-101: RNCC: 3 | RNVC: 2

27 May 2002

5340-12-375-7815
Manual Control Handle

123757815
4100036-181350.000.4: RNCC: 2 | RNVC: 2
4100036-181350.000.4: RNCC: 3 | RNVC: 2
4100036-181350.000.0: RNCC: 5 | RNVC: 2

3 Jul 2008

5340-12-181-7189
Butt Hinge

121817189
39-1051: RNCC: 3 | RNVC: 2

12 Dec 1979

5340-12-342-0118
Nonmetallic Bumper

123420118
07.2047-001.1/01: RNCC: 3 | RNVC: 2
07/2047-001.1: RNCC: 5 | RNVC: 2
07-2047-0011: RNCC: 5 | RNVC: 2

29 Nov 1996

5340-12-161-4569
Retaining Strap

121614569
100332-17000.08: RNCC: 2 | RNVC: 2
100332-17000.08: RNCC: 5 | RNVC: 2
100332-17000-08: RNCC: 5 | RNVC: 2
100332-17000-08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-5496
Webbing Strap

123195496
2782-360110.001.0: RNCC: 2 | RNVC: 2
2782-360110.001.0: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-12-345-7102
Manual Control Lever

123457102
2300211-991440.000.0: RNCC: 2 | RNVC: 2
2300211-991440.000.0: RNCC: 3 | RNVC: 2

17 Apr 1998

5340-12-343-6101
Key Blank

123436101
1 FP1X: RNCC: 3 | RNVC: 2

8 Jul 1997

5340-12-159-9779
Strap Fastener Loop

121599779
42130-10.06: RNCC: 2 | RNVC: 2
42117-20-05: RNCC: 5 | RNVC: 9
03138/31MM: RNCC: 5 | RNVC: 9
42117-20-05: RNCC: 5 | RNVC: 9
42130-10.06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-168-5670
Pad Eye

121685670
1000025-230000-10: RNCC: 3 | RNVC: 2
1000025-230000.10: RNCC: 3 | RNVC: 2
1000025-230000-10: RNCC: 5 | RNVC: 9
1000025-230000.10: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-157-8944
Spring Tension Clip

121578944
001-202.100-024: RNCC: 3 | RNVC: 2
1202-1000-24: RNCC: 5 | RNVC: 2
1202-1000-24: RNCC: 5 | RNVC: 9
001-202-100-024: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-327-1158
Dust And Moisture Seal Boot

123271158
1-6L-12: RNCC: 3 | RNVC: 2
025-12-12: RNCC: 5 | RNVC: 2

3 Dec 1991

5340-12-369-7745
Mechanic Equipment Hardware Kit

123697745
SK872-199100.000.0: RNCC: 3 | RNVC: 2
7083574: RNCC: 5 | RNVC: 2

16 Aug 2006

5340-12-187-5485
Loop Clamp

121875485
1215 9639: RNCC: 3 | RNVC: 2
12159639: RNCC: 5 | RNVC: 9
6-226-0-623-016-5: RNCC: 5 | RNVC: 9
6.226.0.623.016.5: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-194-1849
Metal Runner

121941849
62.6710.065.02-A001: RNCC: 3 | RNVC: 2
142607: RNCC: 5 | RNVC: 2
62-6710-065-02A001: RNCC: 5 | RNVC: 9

11 Oct 1982

5340-12-386-8746
Door Holder

123868746
SK1059-182005.000.0: RNCC: 3 | RNVC: 2
7115702: RNCC: 5 | RNVC: 2
17893440EGS00: RNCC: 5 | RNVC: 9

11 Oct 2011

5340-12-389-2581
Access Cover

123892581
2002307: RNCC: 3 | RNVC: 2
SK903-001200.004.0: RNCC: 5 | RNVC: 2
4616910036: RNCC: 5 | RNVC: 2

13 Jun 2012

5340-12-359-4378
Loop Clamp

123594378
DIN3016-1-E1-45X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-702-5389
Mounting Bracket

127025389
VG95211-ML-127025389: RNCC: 2 | RNVC: 2
5.51.7204.1560.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-378-3743
Mounting Plate

123783743
9997001-205700.001.0: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-196-4578
Electrical-Mechanical Equipment Post

121964578
VG95148B7XM4X15-ST: RNCC: 2 | RNVC: 2
43712681-601: RNCC: 3 | RNVC: 2
ENMET7-15: RNCC: 3 | RNVC: 2
VG95148B7XM4X15-ST: RNCC: 3 | RNVC: 2
18H312: RNCC: 3 | RNVC: 2
18 H 312: RNCC: 5 | RNVC: 2
ENMET7-15 MM: RNCC: 5 | RNVC: 2

11 Jul 1983

5340-12-339-2575
Corner Brace

123392575
11.59637-0024: RNCC: 3 | RNVC: 2
D11.59637-0024: RNCC: 5 | RNVC: 2
596-189: RNCC: 5 | RNVC: 2
596-189: RNCC: 5 | RNVC: 2

31 Oct 1995

5340-12-308-6430
Nonmetallic Bumper

123086430
DIN95364-D125X78-NR60ST-M16X46: RNCC: 2 | RNVC: 2
1.125.78.4D.60NR/ST-M16X46: RNCC: 5 | RNVC: 2
811.035.125.078.16X46.NR60.ST: RNCC: 5 | RNVC: 2
81135-125X78-M16X46.NR60.ST: RNCC: 5 | RNVC: 2
3018158-11MN60: RNCC: 5 | RNVC: 2
3018158-60SHORE: RNCC: 5 | RNVC: 2
3018158/11MN60: RNCC: 5 | RNVC: 2
VG95364-D125X78-M16X46-NR60ST: RNCC: 5 | RNVC: 9
VG95364-D125X78-NR60ST-M16X46: RNCC: 5 | RNVC: 9

31 Oct 1986

5340-12-303-3608
Angle Bracket

123033608
701-111406-905-0: RNCC: 3 | RNVC: 2

18 Mar 1985

5340-12-700-5039
Retaining Strap

127005039
VG95211-ML-127005039: RNCC: 2 | RNVC: 2
5148A-4: RNCC: 3 | RNVC: 2
0500840059990: RNCC: 5 | RNVC: 2

19 Sep 1992

5340-12-186-6537
Retaining Clip

121866537
C22165-A1000-C28: RNCC: 3 | RNVC: 2
C22165A1000C28: RNCC: 5 | RNVC: 9

23 Jan 1981

5340-12-330-9335
Mending Plate

123309335
480-7347-10-00-19: RNCC: 3 | RNVC: 2
480/7347-10-00-19: RNCC: 5 | RNVC: 2

1 Mar 1993

5340-12-196-8555
Dust And Moisture Seal Protective Cap

121968555
025-8636-028: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-12-374-7874
Friction Catch

123747874
10118-183240.000.0: RNCC: 2 | RNVC: 2
10118-183240.000.0: RNCC: 3 | RNVC: 2

20 Mar 2008

5340-12-389-2117
Positioning Thrust Stop

123892117
122W161681.000.0: RNCC: 2 | RNVC: 2
122W161681.000.0: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-12-354-4420
Mechanical Stop

123544420
000N18031/1: RNCC: 3 | RNVC: 2

12 Jul 2001

5340-12-365-1189
Loop Clamp

123651189
53 490.500: RNCC: 3 | RNVC: 2
0009955844: RNCC: 5 | RNVC: 2

30 Nov 2004

5340-12-199-2311
Mending Plate

121992311
752C08122: RNCC: 3 | RNVC: 2
752C08122E1: RNCC: 5 | RNVC: 2
752C08122E1: RNCC: 5 | RNVC: 2

5 Apr 1984

5340-12-320-5568
Synchro Clamp

123205568
374032: RNCC: 3 | RNVC: 9

24 Jan 1990

5340-12-392-4356
Bumper

123924356
40882: RNCC: 3 | RNVC: 2
7062125: RNCC: 5 | RNVC: 2

7 Jun 2013

5340-12-346-1421
Access Cover

123461421
059 466: RNCC: 3 | RNVC: 2
059466: RNCC: 5 | RNVC: 2

18 Jun 1998

5340-12-324-1031
Bow Handle

123241031
54.2544.060.02: RNCC: 3 | RNVC: 2

22 Jan 1991

5340-12-190-5984
Electrical-Mechanical Equipment Post

121905984
02449730: RNCC: 3 | RNVC: 2
2449730: RNCC: 5 | RNVC: 2
2449730EE5054-55: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-191-2140
Sealing Plug Assembly

121912140
4359877044: RNCC: 3 | RNVC: 2
4359877044: RNCC: 5 | RNVC: 2
A4359877044: RNCC: 5 | RNVC: 2

19 Jan 1982

5340-12-365-1176
Spring Tension Clip

123651176
0089889178: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-377-1594
Mounting Bracket

123771594
41282657: RNCC: 3 | RNVC: 2

15 Dec 2008

5340-12-305-4784
Angle Bracket

123054784
54.0042.236.00: RNCC: 3 | RNVC: 2

12 Nov 1985

5340-12-322-8083
Plain Solid Disk

123228083
8470 032 141: RNCC: 3 | RNVC: 2
8470032141: RNCC: 5 | RNVC: 2
8470032141: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-197-8188
Butt Hinge Leaf

121978188
3384801: RNCC: 3 | RNVC: 2

24 Nov 1983

5340-12-312-0146
Angle Bracket

123120146
81974870164: RNCC: 3 | RNVC: 2
81.97487.0164: RNCC: 5 | RNVC: 2

10 Nov 1987

5340-12-044-4241

5340-12-129-3877

5340-12-330-7153
Protection Bellows

123307153
01580: RNCC: 3 | RNVC: 9
6.437-102.0: RNCC: 5 | RNVC: 2
6.437-102: RNCC: 5 | RNVC: 9

29 Jan 1993

5340-12-700-8572
Threaded End Tensioning Tie Rod

127008572
VG95211-ML-127008572: RNCC: 2 | RNVC: 2
155N1220-20-1,5-603: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-371-4809
Handle Grip

123714809
23302-172000.11: RNCC: 2 | RNVC: 2
23302-172000.11: RNCC: 3 | RNVC: 2
2227120: RNCC: 5 | RNVC: 2
4-2227-120: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-12-187-5840
Mending Plate

121875840
6.226.0.650.037.4: RNCC: 3 | RNVC: 9
6-226-0-650-037-4: RNCC: 5 | RNVC: 9

15 Apr 1981

5340-12-323-8117
Electrical-Mechanical Equipment Post

123238117
VG95148-C7XM3X25-NRST: RNCC: 2 | RNVC: 2
VG95148-C7XM3X25-NRST: RNCC: 3 | RNVC: 2
54.2546.040.02: RNCC: 5 | RNVC: 2

20 Dec 1990

5340-12-312-9839
Nonmetallic Bumper

123129839
VG95092B14X7X22X4X12NR60-SCHWARZ: RNCC: 2 | RNVC: 2
ART.-NR.42A,SCHWARZ: RNCC: 3 | RNVC: 2
C42298-Z1-C15: RNCC: 5 | RNVC: 2
B14X7X22X4X12.60NR-SCHWARZ: RNCC: 5 | RNVC: 2
42A,SCHWARZ: RNCC: 5 | RNVC: 2
82200-B14X7X22X4X12.NR60-SCHWARZ: RNCC: 5 | RNVC: 2
00009098406000: RNCC: 5 | RNVC: 2
9330301290009: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-12-145-4527
Nonmetallic Bumper

121454527
VG95092B26X20X30X7NR75: RNCC: 2 | RNVC: 2
82200-B26X20X30X7.NR75: RNCC: 3 | RNVC: 2
ZB630: RNCC: 3 | RNVC: 2
B26X20X30X7.75NR: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-1300
Nonmetallic Bumper

121961300
20-7230-044: RNCC: 3 | RNVC: 2

1 Jun 1983

5340-12-010-9963

5340-12-319-6485
Flare Lock Fastener

123196485
409.070.517: RNCC: 2 | RNVC: 2
409.070.517: RNCC: 3 | RNVC: 2
409070517: RNCC: 5 | RNVC: 2
5L.6097.011.66: RNCC: 5 | RNVC: 2
5L.6097.011.66: RNCC: 5 | RNVC: 2

20 Oct 1989

5340-12-196-9985
Webbing Strap

121969985
4900059-321214.000.0: RNCC: 2 | RNVC: 2
01151-2-SCHLAUFE-FE550MM-LE660MM: RNCC: 3 | RNVC: 2
4900059-321214.000.0: RNCC: 3 | RNVC: 2
4900059-321214.000.0: RNCC: 3 | RNVC: 2
221-00-357-3: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-1130-550: RNCC: 3 | RNVC: 2
4900059-321214.000.0: RNCC: 3 | RNVC: 2
4900059-321214-000-0: RNCC: 5 | RNVC: 2
DIN60060-2-25X550X660-C3/SCHLAUF: RNCC: 5 | RNVC: 9
221-00-357-3: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-165-9046
Catch Strike

121659046
2572-198130-00-0: RNCC: 2 | RNVC: 2
2572-198130-00-0: RNCC: 5 | RNVC: 2
2572-198130.00.0: RNCC: 5 | RNVC: 9

15 Jul 1976

5340-12-162-9331
Electrical-Mechanical Equipment Post

121629331
2300007-063200.08.0: RNCC: 2 | RNVC: 2
2300007-063200.08.0: RNCC: 5 | RNVC: 2
2300007-063200.08.0: RNCC: 5 | RNVC: 9
2300007-063200-08-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-339-7249
Spacing Threaded Standoff

123397249
VG95148C8XM5X136,5-ST: RNCC: 2 | RNVC: 2
211 153 0113/7: RNCC: 3 | RNVC: 2
VG95148-C8XM5X136,5-ST: RNCC: 5 | RNVC: 2

4 Jan 1996

5340-12-380-7278
Loop Clamp

123807278
215/15PPH GD-AS M W2: RNCC: 3 | RNVC: 2
21241: RNCC: 5 | RNVC: 2
81.97445-6028: RNCC: 5 | RNVC: 2

24 Nov 2009

5340-12-322-1159
Manual Control Lever

123221159
9000 8231: RNCC: 3 | RNVC: 2

25 Jul 1990

5340-12-356-3706
Strap Hinge

123563706
2339-010512A00C: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-300-9866
Angle Bracket

123009866
5801881-000600.00: RNCC: 2 | RNVC: 2
7802067010: RNCC: 3 | RNVC: 2
78020 67010: RNCC: 5 | RNVC: 9

15 Sep 1984

5340-12-164-9133
Dust And Moisture Seal Protective Cap

121649133
30-79501-0029: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-198-5019
Dust And Moisture Seal Protective Cap

121985019
160-744860-01: RNCC: 3 | RNVC: 2
160-744860-01: RNCC: 5 | RNVC: 9

2 Feb 1984

5340-12-303-8720
Nonmetallic Bumper

123038720
NO PRIMARY REF 12-303-8720: RNCC: 3 | RNVC: 2
6731 155139: RNCC: 5 | RNVC: 9

10 May 1985

5340-12-179-1722
Platte

121791722
5800822-01-004: RNCC: 3 | RNVC: 2
5800822-01.004: RNCC: 5 | RNVC: 2

15 Jun 1979

5340-12-179-3699
Dust And Moisture Seal Protective Cap

121793699
5800826-302: RNCC: 3 | RNVC: 2

27 Jun 1979

5340-12-164-3027
Retaining Strap

121643027
220 017 635: RNCC: 3 | RNVC: 2
23290-033004-001: RNCC: 5 | RNVC: 9
23290-033004.001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-194-0759
Nonmetallic Bumper

121940759
588.70-510100-007: RNCC: 3 | RNVC: 2

29 Sep 1982

5340-12-124-1200
Rod End Clevis

121241200
DIN71752-G8X32-9SMNPB28K-A2P: RNCC: 2 | RNVC: 2
DIN71752-G8X32-10S20K-A2P: RNCC: 2 | RNVC: 2
DIN71752-G8X32-9SMN28K-A2P: RNCC: 2 | RNVC: 2
DIN71752-G8X32-10S20K-A2P: RNCC: 3 | RNVC: 2
DIN71752-G8X32-10S20K-A2P: RNCC: 3 | RNVC: 2
86445: RNCC: 5 | RNVC: 2
06360610108: RNCC: 5 | RNVC: 2
100200080032/023-10S20K: RNCC: 5 | RNVC: 2
G8X32DIN71752-10S20K: RNCC: 5 | RNVC: 2
DIN71752-G8X32-10S20K: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-178-1092
Access Cover

121781092
2300002-062830.002: RNCC: 2 | RNVC: 2
2300002-062830.002: RNCC: 3 | RNVC: 2
2300002-062830.002: RNCC: 5 | RNVC: 9
2300002-062830-002: RNCC: 5 | RNVC: 9

22 Mar 1979

5340-12-358-2539
Mounting Plate

123582539
J0433105D127-001A0-012: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-12-308-1857
Mending Plate

123081857
81974802086: RNCC: 3 | RNVC: 2

11 Sep 1986

5340-12-010-8494

5340-12-347-0025
Manual Control Handle

123470025
1400988-3000.06: RNCC: 3 | RNVC: 2

12 Oct 1998

5340-12-339-1397
Dust And Moisture Seal Boot

123391397
2012950383: RNCC: 3 | RNVC: 2

16 Oct 1995

5340-12-349-8935
Angle Bracket

123498935
T214M1003101: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-196-0593
Bow Handle

121960593
81611300008: RNCC: 3 | RNVC: 2

24 May 1983

5340-12-346-6473
Webbing Strap

123466473
2300013-4518.00: RNCC: 2 | RNVC: 2
2300013-4518.00: RNCC: 3 | RNVC: 2
9859052: RNCC: 5 | RNVC: 2
2300013-4518.00: RNCC: 5 | RNVC: 9
9859052: RNCC: 5 | RNVC: 9

20 Aug 1998

5340-12-328-7178
Support Hook

123287178
9566: RNCC: 3 | RNVC: 2
9564: RNCC: 5 | RNVC: 2
9564: RNCC: 5 | RNVC: 9

17 Jun 1992

5340-12-323-1540
Spring Tension Clip

123231540
51.0285.001.04: RNCC: 3 | RNVC: 2

29 Oct 1990

5340-12-345-4900
Manual Control Handle

123454900
5800142: RNCC: 3 | RNVC: 2

24 Mar 1998

5340-12-198-7290
Electronic Equipment Hardware Kit

121987290
5801998-640010.00: RNCC: 2 | RNVC: 2
5801998-640010.00: RNCC: 3 | RNVC: 2
5801998-640010.00: RNCC: 3 | RNVC: 2
5801998-640010.00: RNCC: 5 | RNVC: 9
5801998-640010.00: RNCC: 5 | RNVC: 9

22 Feb 1984

5340-12-312-7276
Mounting Bracket

123127276
3819300114: RNCC: 3 | RNVC: 2
381 930 01 14: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-390-7004
Mounting Bracket

123907004
1200886: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-12-316-5872
Lock-Release Lever

123165872
7400001-201220.00: RNCC: 2 | RNVC: 2
7400001-201220.00: RNCC: 3 | RNVC: 2

26 Jan 1989

5340-12-325-7350
Manual Control Lever

123257350
702-738120-000-0: RNCC: 3 | RNVC: 2

4 Jul 1991

5340-12-192-3088
Butt Hinge Leaf

121923088
1434-5320-00: RNCC: 3 | RNVC: 2
100006-520010.000: RNCC: 5 | RNVC: 2
1434-5320-00: RNCC: 5 | RNVC: 2
1434-5320.00: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-166-5770
Bail Handle

121665770
1200009-0756-009: RNCC: 2 | RNVC: 2
2215124005: RNCC: 5 | RNVC: 2
22151 24005: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-702-1843
Mounting Bracket

127021843
VG95211-ML-127021843: RNCC: 2 | RNVC: 2
30.7206.1210: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-360-2093
Webbing Strap

123602093
KT1-0287/98: RNCC: 3 | RNVC: 2
KT1-0287/98: RNCC: 5 | RNVC: 9

17 Apr 2003

5340-12-177-9010
Pipe Hanger

121779010
PAN4280-40: RNCC: 3 | RNVC: 2

7 Mar 1979

5340-12-702-2467
Mounting Bracket

127022467
VG95211-ML-127022467: RNCC: 2 | RNVC: 2
30.7803.27: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-341-2111
Runner

123412111
2500262-194000.000.0: RNCC: 2 | RNVC: 2
2500262-194000.000.0: RNCC: 3 | RNVC: 2

9 Aug 1996

5340-12-701-4787
Mounting Bracket

127014787
VG95211-ML-127014787: RNCC: 2 | RNVC: 2
5.12.5811.1390.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-193-8498
Access Cover

121938498
30-79510-0030: RNCC: 3 | RNVC: 2

7 Sep 1982

5340-12-321-4102
Metal Grille

123214102
5-621-0765: RNCC: 3 | RNVC: 2

16 May 1990

5340-12-301-1280
Angle Bracket

123011280
A-243799-011: RNCC: 3 | RNVC: 2
A243799-011: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-339-7109
Mounting Bracket

123397109
2500255-190012.000.0: RNCC: 2 | RNVC: 2
2500255-190012.000.0: RNCC: 3 | RNVC: 2
2500255.190012.000.0: RNCC: 5 | RNVC: 9
2500255-190012-000-0: RNCC: 5 | RNVC: 9

29 Dec 1995

5340-12-156-9029
Compression Cup

121569029
H325-1-88NBR/101: RNCC: 3 | RNVC: 2
H325-1-88NBR101: RNCC: 5 | RNVC: 2
H325-1-14PA101: RNCC: 5 | RNVC: 2
H325-1-14PA101: RNCC: 5 | RNVC: 2
H325-1-14PA101: RNCC: 5 | RNVC: 9
H325-1-14PA101: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5386
Mounting Bracket

127025386
VG95211-ML-127025386: RNCC: 2 | RNVC: 2
5.51.7204.1420.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-4634
Loop Clamp

127014634
VG95211-ML-127014634: RNCC: 2 | RNVC: 2
5.12.5314.8110.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2200
Rod End Connector

127012200
VG95211-ML-127012200: RNCC: 2 | RNVC: 2
5.12.0605.8550.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6137
Mounting Bracket

127016137
VG95211-ML-127016137: RNCC: 2 | RNVC: 2
5.12.7010.1530.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-340-7745
Lock-Release Lever

123407745
5801984-200220.007.0: RNCC: 2 | RNVC: 2
5801984-200220.007.0: RNCC: 3 | RNVC: 2

11 Jun 1996

5340-12-703-3012
Mounting Bracket

127033012
VG95211-ML-127033012: RNCC: 2 | RNVC: 2
4.76.0605.3370.00: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-12-148-3716
Resilient Mount

121483716
80706601: RNCC: 3 | RNVC: 2
410-314-B-00.02: RNCC: 3 | RNVC: 2
410-314-B-00.02: RNCC: 5 | RNVC: 2
410-314B0002: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-387-6990
Loop Clamp

123876990
I-SGB-36: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-12-332-5250
Mounting Bracket

123325250
2300232-063780.000.0: RNCC: 2 | RNVC: 2
2300232-063780.000.0: RNCC: 3 | RNVC: 2

18 Aug 1993

5340-12-305-0556
Angle Bracket

123050556
A-296712-165: RNCC: 3 | RNVC: 2
A296712-165: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-306-0704
Mending Plate

123060704
5801984-201000.003.0: RNCC: 2 | RNVC: 2
5801984-201000.003.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-701-6541
Loop Clamp

127016541
VG95211-ML-127016541: RNCC: 2 | RNVC: 2
5.12.7207.8050.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-319-3539
Angle Bracket

123193539
272.1372.13-11: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-12-180-2155
Angle Bracket

121802155
02588723: RNCC: 3 | RNVC: 2
2588723EE5565-18: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-177-2818
Loop Clamp

121772818
1-1-4080: RNCC: 3 | RNVC: 2

24 Jan 1979

5340-12-365-3943
Track Stop

123653943
5161-211112A02B: RNCC: 2 | RNVC: 2
5161-211112A02B: RNCC: 3 | RNVC: 2

28 Dec 2004

5340-12-321-2205
Dust And Moisture Seal Protective Cap

123212205
1125500003: RNCC: 3 | RNVC: 2
0117 2724: RNCC: 3 | RNVC: 2
01172724ED8976-12: RNCC: 5 | RNVC: 2

19 Apr 1990

5340-12-151-0537
Buegel- Griff

5340-12-150-6978
Federkraft- Klipp

5340-12-322-3534
Retaining Strap

123223534
9000 4457: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-12-305-6629
Dust And Moisture Seal Protective Plug

123056629
GL30 SCHWARZ: RNCC: 3 | RNVC: 2
GL30 86: RNCC: 5 | RNVC: 2
GL30 86SW: RNCC: 5 | RNVC: 2
000000-0151.271: RNCC: 5 | RNVC: 2
151.271: RNCC: 5 | RNVC: 2

3 Dec 1985

5340-12-361-9976
Lock Spindle

123619976
1000-U166: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-12-303-5934
Sealing Plug Assembly

123035934
052115627: RNCC: 3 | RNVC: 2

11 Apr 1985

5340-12-380-2816
Extension Drawer Slide

123802816
60005370.02: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-12-181-1081
Mounting Bracket

121811081
81669705005: RNCC: 3 | RNVC: 2
81.66970.5005: RNCC: 5 | RNVC: 2

24 Oct 1979

5340-12-701-4967
Retaining Strap

127014967
VG95211-ML-127014967: RNCC: 2 | RNVC: 2
5.12.5850.1800.11: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-357-2245
Loop Clamp

123572245
DIN3016-1-E1-42X20-W1-2-NBR: RNCC: 2 | RNVC: 2
RSGU0.42/20: RNCC: 3 | RNVC: 2
DIN3016-1-E1-42X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-E42X20-W1: RNCC: 5 | RNVC: 9

23 May 2002

5340-12-176-0830
Angle Bracket

121760830
81411402216: RNCC: 3 | RNVC: 2
23246-150600.019.0: RNCC: 5 | RNVC: 9
23246-150600-019-0: RNCC: 5 | RNVC: 9

8 Nov 1978

5340-12-162-1394
Clamping Catch

121621394
6020279: RNCC: 3 | RNVC: 2
6.373-054.0: RNCC: 5 | RNVC: 2
7-221-1410: RNCC: 5 | RNVC: 2
6.373-054: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-165-7921
Retaining Strap

121657921
DIN1596-43ZN: RNCC: 2 | RNVC: 2
DIN1596-43-VERZINKT: RNCC: 3 | RNVC: 2
43DIN1596VZKGELB: RNCC: 3 | RNVC: 2
DIN1596-43-VERZINKT: RNCC: 3 | RNVC: 2
DIN1596-43ZN: RNCC: 3 | RNVC: 2
43DIN1596VERZINKT: RNCC: 5 | RNVC: 2
DIN1596-43-VERZINKT: RNCC: 5 | RNVC: 2
5407000043: RNCC: 5 | RNVC: 2
DIN1596-43ZN: RNCC: 5 | RNVC: 2

26 Jun 1976

5340-12-190-9360
Resilient Mount

121909360
V403: RNCC: 3 | RNVC: 2
SP403-234: RNCC: 5 | RNVC: 2
SP 403-234: RNCC: 5 | RNVC: 9

23 Dec 1981

5340-12-163-7761
Dust And Moisture Seal Protective Cap

121637761
5835-1717: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-165-3261
Angle Bracket

121653261
307.161-50130.08: RNCC: 3 | RNVC: 2
0307161-50130-08: RNCC: 5 | RNVC: 9

9 Apr 1976

5340-12-363-5104
Door Handle Unit

123635104
1125-U191-A: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-192-1623
Retaining Strap

121921623
SW4080T029: RNCC: 3 | RNVC: 2
SW4080T029: RNCC: 5 | RNVC: 9

29 Mar 1982

5340-12-300-0282
Dust And Moisture Seal Protective Cap

123000282
4167101: RNCC: 3 | RNVC: 2

27 Jun 1984

5340-12-042-5793

5340-12-340-7473
Mounting Bracket

123407473
6937-930.01: RNCC: 3 | RNVC: 2

4 Jun 1996

5340-12-370-1551
Clamping Catch

123701551
4077313: RNCC: 3 | RNVC: 2

26 Sep 2006

5340-12-301-6084
Angle Bracket

123016084
2300107-370000.07: RNCC: 2 | RNVC: 2
2300107-370000.07: RNCC: 3 | RNVC: 2
2300107-370000.07: RNCC: 5 | RNVC: 9
2300107-370000.07: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-365-1207
Handle Grip

123651207
4634270220: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-360-2845
Access Cover

123602845
4110611617: RNCC: 3 | RNVC: 2

5 May 2003

5340-12-319-4278
Door Button

123194278
200-9043-9125: RNCC: 3 | RNVC: 2
1000-U134/1000-U138/1000-228: RNCC: 3 | RNVC: 2
02660030/02421070/02405270: RNCC: 3 | RNVC: 2
702825-112045: RNCC: 5 | RNVC: 2

2 Oct 1989

5340-12-192-8752
Loop Clamp

121928752
06.67840-0111: RNCC: 3 | RNVC: 2
06.67840-0111: RNCC: 5 | RNVC: 2
06678400111: RNCC: 5 | RNVC: 2
A16MAN194: RNCC: 5 | RNVC: 2

1 Jun 1982

5340-12-382-4050
Cushioning Pad

123824050
2000330: RNCC: 3 | RNVC: 2
4617570296: RNCC: 5 | RNVC: 2
SK778M6-236000.009.0: RNCC: 5 | RNVC: 2

16 Jun 2010

5340-12-389-2639
Nonmetallic Solid Wheel

123892639
POA 65/10G: RNCC: 3 | RNVC: 2

14 Jun 2012

5340-12-187-4661
Angle Bracket

121874661
5801669-7370.02: RNCC: 3 | RNVC: 2
5801669-7370-02: RNCC: 5 | RNVC: 9
5801669-7370-02: RNCC: 5 | RNVC: 9
5801669-7370.02: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-302-1505
Hasp Staple

123021505
883: RNCC: 3 | RNVC: 2
183871227B: RNCC: 3 | RNVC: 2
183871227B: RNCC: 3 | RNVC: 2
9000 3110: RNCC: 5 | RNVC: 2
983 135-917: RNCC: 5 | RNVC: 2
883-VERZINKT: RNCC: 5 | RNVC: 2
183871227B: RNCC: 5 | RNVC: 9

6 Dec 1984

5340-12-165-1710
Compression Cup

121651710
H240-1-90NBR/108: RNCC: 3 | RNVC: 2
H240-1-90NBR108: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-318-6850
Angle Bracket

123186850
704-121401-902-3: RNCC: 3 | RNVC: 2

8 Aug 1989

5340-12-181-1661
Spring Tension Clip

121811661
11430PH0: RNCC: 3 | RNVC: 2
81.97401-0578: RNCC: 5 | RNVC: 2
81974010578: RNCC: 5 | RNVC: 2

29 Oct 1979

5340-12-363-0225
Helical Compression Spring Retainer

123630225
742-0015: RNCC: 3 | RNVC: 2

27 Apr 2004

5340-12-178-9020
Mounting Bracket

121789020
CF 311 110: RNCC: 3 | RNVC: 2
CF 311 110: RNCC: 5 | RNVC: 2
CF311110: RNCC: 5 | RNVC: 2
CF 311 110: RNCC: 5 | RNVC: 2
CF311110: RNCC: 5 | RNVC: 2
CF311110: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-330-2430
Access Cover

123302430
8511914.085: RNCC: 3 | RNVC: 2
0851 1914.085: RNCC: 5 | RNVC: 2

20 Nov 1992

5340-12-363-4973
Access Cover

123634973
2500278-192000.000.0: RNCC: 3 | RNVC: 2

22 Jun 2004

5340-12-169-6976
Double Angle Bracket

121696976
4984210369: RNCC: 3 | RNVC: 2
81502150013: RNCC: 5 | RNVC: 2
81.50215-0013: RNCC: 5 | RNVC: 9

3 Jun 1977

5340-12-365-1651
Mounting Plate

123651651
2500075-065115-001.0: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-183-9330
Manual Control Handle

121839330
333004-0383.000: RNCC: 2 | RNVC: 2
333004-0383.000: RNCC: 3 | RNVC: 2
1255-31800.003: RNCC: 5 | RNVC: 2
1255-29.3: RNCC: 5 | RNVC: 2
1255-31800.003: RNCC: 5 | RNVC: 2
1255-29-3: RNCC: 5 | RNVC: 9
1255-31800-003: RNCC: 5 | RNVC: 9
333004-0383.000: RNCC: 5 | RNVC: 9
1255-31800-003: RNCC: 5 | RNVC: 9
1255-31800.003: RNCC: 5 | RNVC: 9

3 Jun 1980

5340-12-165-9916
Angle Bracket

121659916
2500001-194200.01.0: RNCC: 2 | RNVC: 2
2500001-194200.01.0: RNCC: 3 | RNVC: 2
2500001-194200.01.0: RNCC: 5 | RNVC: 9
2500001-194200-01-0: RNCC: 5 | RNVC: 9
2500001-194200-01-0: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-12-352-6109
Door Handle

123526109
8120-0020: RNCC: 2 | RNVC: 2
8120-0020: RNCC: 3 | RNVC: 2

30 Nov 2000

5340-12-186-4586
Loop Clamp

121864586
0287 9535: RNCC: 3 | RNVC: 2
2879534UE0704-79: RNCC: 5 | RNVC: 2
2879535: RNCC: 5 | RNVC: 2
2879535KZ0704-79: RNCC: 5 | RNVC: 2

5 Jan 1981

5340-12-350-4174
Butt Hinge

123504174
J52424020-401: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-12-145-3373
Retaining Strap

121453373
X11-11J20: RNCC: 3 | RNVC: 2
10300218: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-185-2925
Angle Bracket

121852925
5801357-1300.26: RNCC: 2 | RNVC: 2
5801357-1300.26: RNCC: 3 | RNVC: 2
5801357-1300-26: RNCC: 5 | RNVC: 9
5801357-1300-26: RNCC: 5 | RNVC: 9
5801357-1300-26: RNCC: 5 | RNVC: 9

25 Sep 1980

5340-12-186-7745
Electrical-Mechanical Equipment Post

121867745
5802206-149000-004: RNCC: 2 | RNVC: 2
535.5478: RNCC: 3 | RNVC: 2
5355478: RNCC: 5 | RNVC: 2

4 Feb 1981

5340-12-174-9523
Spring Tension Clip

121749523
50247: RNCC: 3 | RNVC: 2
C 6706 707: RNCC: 5 | RNVC: 2
C 6706 707: RNCC: 5 | RNVC: 2
50 247: RNCC: 5 | RNVC: 2
2500127-130000-03: RNCC: 5 | RNVC: 9

9 Aug 1978

5340-12-305-1333
Metal Runner

123051333
4900059-111220.001.0: RNCC: 3 | RNVC: 2
1223787: RNCC: 5 | RNVC: 2

1 Oct 1985

5340-12-188-6795
Detent Plunger

121886795
31828-01: RNCC: 3 | RNVC: 2
31828-01: RNCC: 5 | RNVC: 2

23 Jul 1981

5340-12-182-3851
Mending Plate

121823851
1700001-300-03: RNCC: 2 | RNVC: 2
1700001-300-03: RNCC: 5 | RNVC: 9

28 Jan 1980

5340-12-159-8633
Expansion Plug

121598633
100332-16000.61: RNCC: 2 | RNVC: 2
100332-16000-61: RNCC: 5 | RNVC: 2
100332-16000.61: RNCC: 5 | RNVC: 2
100332-16000-61: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-343-7409
Retaining Band

123437409
0347 1986: RNCC: 3 | RNVC: 2
03471986: RNCC: 5 | RNVC: 2
3471986ED5044-72: RNCC: 5 | RNVC: 2
5148-72-09.01: RNCC: 5 | RNVC: 2
D5148-72-09.01: RNCC: 5 | RNVC: 2

21 Jul 1997

5340-12-191-2141
Double Angle Bracket

121912141
4354290040: RNCC: 3 | RNVC: 2
A4354290040: RNCC: 5 | RNVC: 2

19 Jan 1982

5340-12-190-7338
Mending Plate

121907338
CF 327 174: RNCC: 3 | RNVC: 2
CF 327 174: RNCC: 5 | RNVC: 2
CF327174: RNCC: 5 | RNVC: 2
CF327174: RNCC: 5 | RNVC: 2

10 Dec 1981

5340-12-382-9174
Rigid Caster

123829174
BX-VPP 150G-SG: RNCC: 3 | RNVC: 2

24 Aug 2010

5340-12-185-3225
Mending Plate

121853225
8439832: RNCC: 3 | RNVC: 2
0018-349: RNCC: 5 | RNVC: 2
0018349: RNCC: 5 | RNVC: 2

30 Sep 1980

5340-12-311-0252
Nonmetallic Bumper

123110252
E40P01-0440.03: RNCC: 2 | RNVC: 2
837.E40P01-0440.03.NBR45: RNCC: 3 | RNVC: 2

17 Jul 1987

5340-12-370-6622
Rod End Clevis

123706622
GA52547-1000: RNCC: 3 | RNVC: 2

6 Dec 2006

5340-12-177-3684
Angle Bracket

121773684
51-6861-400-06: RNCC: 3 | RNVC: 2

29 Jan 1979

5340-12-370-8398
Access Cover

123708398
3121-0006: RNCC: 2 | RNVC: 2
3121-0006: RNCC: 3 | RNVC: 2

9 Jan 2007

5340-12-042-2491

5340-12-186-4981
Angle Bracket

121864981
015-474: RNCC: 3 | RNVC: 2
514132767: RNCC: 5 | RNVC: 2

9 Jan 1981

5340-12-392-0044
Mounting Plate

123920044
I007008TAN686A: RNCC: 3 | RNVC: 2

25 Apr 2013

5340-12-311-5109
Mounting Bracket

123115109
4584301: RNCC: 3 | RNVC: 2

11 Sep 1987

5340-12-375-0448
Angle Bracket

123750448
181733119: RNCC: 3 | RNVC: 2

16 Apr 2008

5340-12-163-0050
Retaining Strap

121630050
A89MMN346: RNCC: 3 | RNVC: 2
A89MMN346ST: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-371-3533
Mounting Plate

123713533
1220 0063: RNCC: 3 | RNVC: 2
12200063: RNCC: 5 | RNVC: 9

20 Mar 2007

5340-12-316-2963
Mending Plate

123162963
6392575: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-191-5766
Double Angle Bracket

121915766
81.51710.5198: RNCC: 3 | RNVC: 2
81517105198: RNCC: 5 | RNVC: 2

11 Feb 1982

5340-12-162-3624
Butt Hinge

121623624
2216028701: RNCC: 3 | RNVC: 2
22160 28701: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-366-7002
Extension Handle

123667002
5175742: RNCC: 3 | RNVC: 2

25 May 2005

5340-12-185-4682
Angle Bracket

121854682
3558062: RNCC: 3 | RNVC: 2

9 Oct 1980

5340-12-382-4155
Dust And Moisture Seal Protective Cover

123824155
6000900055: RNCC: 3 | RNVC: 2

17 Jun 2010

5340-12-391-8947
Key Blank

123918947
0007607806: RNCC: 3 | RNVC: 2

17 Apr 2013

5340-12-162-3575

5340-12-044-4242

5340-12-363-2740
Mechanical Stop

123632740
5981-284000.001.0: RNCC: 3 | RNVC: 2

19 May 2004

5340-12-153-1991
Resilient Mount

121531991
DIN95363-A20X15-NR45ST: RNCC: 2 | RNVC: 2
500021-M6X20.NR45.ST: RNCC: 5 | RNVC: 2
P009279947101000: RNCC: 5 | RNVC: 2
20-15-100-45SH0RE: RNCC: 5 | RNVC: 2
20-15-4: RNCC: 5 | RNVC: 2
VG95363-A20X15-NR45ST: RNCC: 5 | RNVC: 9
VG95363A20X15NR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-344-4614
Mounting Bracket

123444614
A-244810-011: RNCC: 3 | RNVC: 2
A244810-011: RNCC: 5 | RNVC: 2

29 Oct 1997

5340-12-131-5894
Loop Clamp

121315894
DIN71555-40,3-PHOSPHATIERT: RNCC: 2 | RNVC: 2
DIN71555-40,3-PHOSPHATIERT: RNCC: 3 | RNVC: 2
40,3/71555PH: RNCC: 3 | RNVC: 2
DIN71555-40-3PH0SPHATIERT: RNCC: 5 | RNVC: 2
071555040300: RNCC: 5 | RNVC: 2
40-3DIN71555PHRE: RNCC: 5 | RNVC: 2
40-3DIN71555PH0SPHATIERT: RNCC: 5 | RNVC: 2
5500200040: RNCC: 5 | RNVC: 2
DIN71555-40-3PH0SPHATIERT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-3325
Nut And Bolt Locking Plate

121963325
P-855938-403: RNCC: 3 | RNVC: 2
P855938-403: RNCC: 5 | RNVC: 2

28 Jun 1983

5340-12-344-3758
Mounting Bracket

123443758
A-296860-008: RNCC: 3 | RNVC: 2
A-296860-008: RNCC: 5 | RNVC: 9
A296860-008: RNCC: 5 | RNVC: 9

21 Oct 1997

5340-12-197-5856
Mending Plate

121975856
A-230129-025: RNCC: 3 | RNVC: 2
A230129-025: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-313-0366
Double Angle Bracket

123130366
P-086150-003: RNCC: 3 | RNVC: 2
P086150-003: RNCC: 5 | RNVC: 2

1 Mar 1988

5340-12-701-6059
Mounting Bracket

127016059
VG95211-ML-127016059: RNCC: 2 | RNVC: 2
5.12.7002.1130.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-350-7187
Mending Plate

123507187
58R121-27-2: RNCC: 3 | RNVC: 2
20320030: RNCC: 5 | RNVC: 2

10 May 2000

5340-12-144-9491
Turnbuckle Body

121449491
LN29601B04-290: RNCC: 2 | RNVC: 2
18X1X290M10X1LN29601: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-314-1101
Double Angle Bracket

123141101
6100127-0000.15: RNCC: 2 | RNVC: 2
8791321175: RNCC: 3 | RNVC: 9

8 Jun 1988

5340-12-183-0535
Angle Bracket

121830535
03433540: RNCC: 3 | RNVC: 2
3433540EE5091-29: RNCC: 5 | RNVC: 2

15 Mar 1980

5340-12-356-6265
Manual Control Handle

123566265
W85-300-3200-02: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-198-0811
Nonmetallic Bumper

121980811
5550-1214: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-12-359-6389
Mounting Bracket

123596389
07352: RNCC: 3 | RNVC: 2
KOPPELSTUK PULSATIE DAMPER 1": RNCC: 5 | RNVC: 9

24 Feb 2003

5340-12-195-8065
Double Angle Bracket

121958065
160-26694-02: RNCC: 3 | RNVC: 2
160-26694-02: RNCC: 5 | RNVC: 9

19 Apr 1983

5340-12-312-1104
Loop Clamp

123121104
9XB 096 126-00: RNCC: 3 | RNVC: 2
096126-00: RNCC: 5 | RNVC: 2
096126-00: RNCC: 5 | RNVC: 2
096 126-00: RNCC: 5 | RNVC: 9
9XB 096 126-00: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-12-177-5158
Mounting Bracket

121775158
2300002-184810.000: RNCC: 2 | RNVC: 2
2300002-184810.000: RNCC: 3 | RNVC: 2
2300002-184810: RNCC: 5 | RNVC: 2
2300002-184810: RNCC: 5 | RNVC: 9
2300002-184810: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-165-3573
Mending Plate

121653573
307.141-10002.02: RNCC: 3 | RNVC: 2
0307141-10002-02: RNCC: 5 | RNVC: 9

23 Apr 1976

5340-12-348-9268
Mounting Bracket

123489268
245/7383-02-25-00: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-12-372-6063
Dust And Moisture Seal Protective Plug

123726063
2522 4524-104: RNCC: 3 | RNVC: 2
2522 4524-104: RNCC: 5 | RNVC: 2

2 Aug 2007

5340-12-308-0650
Spring Tension Clip

123080650
100418-30013-03: RNCC: 2 | RNVC: 2
100418-30013-03: RNCC: 3 | RNVC: 2
811000-2003: RNCC: 3 | RNVC: 2
100332-90520.03: RNCC: 5 | RNVC: 2
100418-90520.03: RNCC: 5 | RNVC: 2
113578: RNCC: 5 | RNVC: 2

27 Aug 1986

5340-12-185-4875
Expansion Plug

121854875
DIN470-36-ST-BL: RNCC: 2 | RNVC: 2
N0116041: RNCC: 3 | RNVC: 2
36DIN470: RNCC: 5 | RNVC: 2
36DIN470STBL: RNCC: 5 | RNVC: 2

11 Oct 1980

5340-12-356-8184
Angle Bracket

123568184
ED88-0100-01001-141: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-12-156-0472
Butt Hinge Leaf

121560472
161792201: RNCC: 3 | RNVC: 2
7101-11-42-01: RNCC: 5 | RNVC: 2
7101-11-42.01: RNCC: 5 | RNVC: 2
7101-11-42-01: RNCC: 5 | RNVC: 9
7101-11-42.01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-349-6126
Access Cover

123496126
DVAC001: RNCC: 3 | RNVC: 2
KMP 6.30-2: RNCC: 5 | RNVC: 2

8 Dec 1999

5340-12-136-4110

5340-12-304-4826
Angle Bracket

123044826
2300106-260200.14: RNCC: 2 | RNVC: 2
2300106-260200.14: RNCC: 3 | RNVC: 2
2300106-260200.14: RNCC: 5 | RNVC: 9
2300106-260200.14: RNCC: 5 | RNVC: 9

23 Jul 1985

5340-12-194-4715
Nonmetallic Bumper

121944715
61.9928.505.61-A001: RNCC: 3 | RNVC: 2
206157: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-12-311-8445
Metal Runner

123118445
5801313-905.02: RNCC: 2 | RNVC: 2
5801313-905.02: RNCC: 3 | RNVC: 2

22 Oct 1987

5340-12-194-2886
Angle Bracket

121942886
5547972: RNCC: 3 | RNVC: 2
554.7972: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-12-199-2309
Retaining Strap

121992309
114M80007: RNCC: 3 | RNVC: 2

5 Apr 1984

5340-12-041-0824

5340-12-350-9253
Webbing Strap

123509253
07.0120.49: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-12-145-8220
Butt Hinge

121458220
1290: RNCC: 3 | RNVC: 9
1290: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-330-3690
Sealing Plug Assembly

123303690
95049-150-020-001: RNCC: 3 | RNVC: 2
95049-150-020-001: RNCC: 5 | RNVC: 9

8 Dec 1992

5340-12-162-7433
Extension Drawer Slide

121627433
1008080: RNCC: 3 | RNVC: 2
75C10-11-25-11: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-304-8022
Dust And Moisture Seal Protective Cap

123048022
F1113-57VC/458: RNCC: 3 | RNVC: 2
F1113-57VC458: RNCC: 5 | RNVC: 2
4069875545: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-148-2533
Resilient Mount

121482533
5L6671-001-99: RNCC: 3 | RNVC: 2
5LV6671-001-99: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-172-6189
Detent Plunger

121726189
1224-206.14: RNCC: 2 | RNVC: 2
532008-0463.000: RNCC: 3 | RNVC: 2
532008-463: RNCC: 3 | RNVC: 2
532008-0463.000: RNCC: 5 | RNVC: 2
532008-463: RNCC: 5 | RNVC: 2
1224-206-14: RNCC: 5 | RNVC: 9
1224-206.14: RNCC: 5 | RNVC: 9

31 Jan 1978

5340-12-313-2416
Mending Plate

123132416
P-146244-406: RNCC: 3 | RNVC: 2
P146244-406: RNCC: 5 | RNVC: 2

12 Mar 1988

5340-12-340-1394
Multiple Angle Bracket

123401394
P-295669-407: RNCC: 3 | RNVC: 2
P295669-407: RNCC: 5 | RNVC: 2

5 Mar 1996

5340-12-701-8058
Mounting Bracket

127018058
VG95211-ML-127018058: RNCC: 2 | RNVC: 2
5.12.8700.2580.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-3766
Retaining Strap

127023766
VG95211-ML-127023766: RNCC: 2 | RNVC: 2
5.12.5101.4805.05: RNCC: 3 | RNVC: 2

6 Apr 1995

Load More Results