What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 147 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 147 of 178

5340-12-131-5497

5340-12-135-6807

5340-12-391-8987
Webbing Strap

123918987
190 520: RNCC: 3 | RNVC: 2

17 Apr 2013

5340-12-365-7767
Manual Control Lever

123657767
AS212-140000.002.0: RNCC: 3 | RNVC: 2

2 Feb 2005

5340-12-701-5421
Mounting Plate

127015421
VG95211-ML-127015421: RNCC: 2 | RNVC: 2
5.12.6110.0940.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-381-0393
Spring Tension Clip

123810393
5.099-301.0: RNCC: 3 | RNVC: 2

4 Jan 2010

5340-12-702-5327
Mounting Bracket

127025327
VG95211-ML-127025327: RNCC: 2 | RNVC: 2
5.51.7060.0210.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-374-1948
Mounting Bracket

123741948
1517714: RNCC: 3 | RNVC: 2
548-140102.00.0: RNCC: 5 | RNVC: 2
15014976: RNCC: 5 | RNVC: 2

29 Jan 2008

5340-12-198-7624
Dust And Moisture Seal Protective Plug

121987624
2572-191340.01.0: RNCC: 2 | RNVC: 2
2572-191340-01-0: RNCC: 3 | RNVC: 2
2572-191340-01-0: RNCC: 5 | RNVC: 9

23 Feb 1984

5340-12-701-6514
Angle Bracket

127016514
VG95211-ML-127016514: RNCC: 2 | RNVC: 2
5.12.7206.1694.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-148-9178
Loop Clamp

121489178
DIN3016-1-E2-9-11X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU0.9-11/15: RNCC: 3 | RNVC: 2
DIN3016-E2-9-11X15-W1-2: RNCC: 3 | RNVC: 2
4209101009: RNCC: 5 | RNVC: 2
RSGU9-11/15: RNCC: 5 | RNVC: 2
23176-060000-90-0: RNCC: 5 | RNVC: 2
RSGU9-11-15: RNCC: 5 | RNVC: 2
DIN3016-E2-9-11X15-W1-2: RNCC: 5 | RNVC: 9
23176-060000-90-0: RNCC: 5 | RNVC: 9
23176-060000.90.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-2368
Mounting Bracket

123172368
5-440-130: RNCC: 3 | RNVC: 2
440 130: RNCC: 5 | RNVC: 9

20 Mar 1989

5340-12-315-5987
Retaining Strap

123155987
DIN3016-1-F1-28X20-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-28X20-W5: RNCC: 3 | RNVC: 2
RSGU2.28/20-W5: RNCC: 3 | RNVC: 2
DIN3016-F1-28X20-W5: RNCC: 5 | RNVC: 9
VG95931F28X20W5: RNCC: 5 | RNVC: 9

11 Nov 1988

5340-12-364-3921
Angle Bracket

123643921
1873-184010.001.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-317-3246
Mounting Bracket

123173246
4900064-4124.017: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-176-2774
Webbing Strap

121762774
23111-4217.00: RNCC: 2 | RNVC: 2
983 239-257: RNCC: 3 | RNVC: 2
23111-4217.00: RNCC: 3 | RNVC: 2
23111-4217.00: RNCC: 3 | RNVC: 9
23111-4217-00: RNCC: 5 | RNVC: 2
23111-4217-00: RNCC: 5 | RNVC: 9
23111-4217-00: RNCC: 5 | RNVC: 9
23111-4217.00: RNCC: 5 | RNVC: 9
000-B2-25X2,5X250-BW-RAL6031: RNCC: 6 | RNVC: 9

23 Nov 1978

5340-12-337-8966
Access Door

123378966
100050662: RNCC: 3 | RNVC: 2
10 0050 662: RNCC: 5 | RNVC: 2

2 May 1995

5340-12-338-2629
Webbing Strap

123382629
5803741-500440.00: RNCC: 2 | RNVC: 2
5803741-500440.00: RNCC: 3 | RNVC: 2
DIN60060-1-25X580-D2: RNCC: 5 | RNVC: 9

13 Jun 1995

5340-12-363-5047
Dust And Moisture Seal Protective Cap

123635047
1-20-006-5-00000-B3-0-00-Z01: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-163-0031
Retaining Strap

121630031
VG95933ER-42-W1-BK: RNCC: 2 | RNVC: 2
1/2D42MMN325: RNCC: 3 | RNVC: 2
MMN325-1-2D9-42: RNCC: 5 | RNVC: 2
1-2D42MMN325: RNCC: 5 | RNVC: 2
MMN325-1-2D42: RNCC: 5 | RNVC: 2
MMN325-1-2D9-42: RNCC: 5 | RNVC: 2
MMN325-1-2D42: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-382-2530
Mounting Bracket

123822530
S434M1083102: RNCC: 3 | RNVC: 2

27 May 2010

5340-12-313-3160
Rod End Clevis

123133160
16206009: RNCC: 3 | RNVC: 2
ED623-003: RNCC: 5 | RNVC: 2

19 Mar 1988

5340-12-154-2368
Clamping Catch

121542368
5800375-40000.11: RNCC: 2 | RNVC: 2
6020208: RNCC: 3 | RNVC: 2
V22.280.40000-11: RNCC: 5 | RNVC: 2
V22-280-40000-11FZ: RNCC: 5 | RNVC: 2
5800375-40000-11: RNCC: 5 | RNVC: 9
5800375-40000.11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-8443
Door Button

121988443
1686-399100.01: RNCC: 3 | RNVC: 2
1686-399100-01: RNCC: 5 | RNVC: 2
1686-399100.01: RNCC: 5 | RNVC: 9

3 Mar 1984

5340-12-371-1498
Dust And Moisture Seal Protective Cap

123711498
200Z16X8: RNCC: 3 | RNVC: 2
81960020513: RNCC: 5 | RNVC: 2
GPN200Z16X8: RNCC: 5 | RNVC: 2
81.96002-0513: RNCC: 5 | RNVC: 2
81.96002.0513: RNCC: 5 | RNVC: 2
GPN200,Z16X8: RNCC: 5 | RNVC: 9
Z16X8: RNCC: 5 | RNVC: 9
Z16X8GPN200: RNCC: 5 | RNVC: 9

21 Feb 2007

5340-12-356-1856
Plain Solid Disk

123561856
1242670676: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-301-3872
Plain Solid Disk

123013872
212711: RNCC: 3 | RNVC: 2
212711: RNCC: 5 | RNVC: 2
212711: RNCC: 5 | RNVC: 9

11 Oct 1984

5340-12-345-9042
Sliding Stay

123459042
2300061-291200.011: RNCC: 2 | RNVC: 2
2300061-291200.011: RNCC: 3 | RNVC: 2
2300061-291200.011: RNCC: 5 | RNVC: 9
9908161: RNCC: 5 | RNVC: 9

14 May 1998

5340-12-352-4375
Rim Lock

123524375
51269: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-353-0296
Access Cover

123530296
0115 2712: RNCC: 3 | RNVC: 2

22 Jan 2001

5340-12-357-3456
Section Block Clamp

123573456
8809951468: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-12-386-8320
Mechanic Equipment Hardware Kit

123868320
05570614: RNCC: 3 | RNVC: 2
CV190481: RNCC: 5 | RNVC: 2
05570614: RNCC: 5 | RNVC: 2

6 Oct 2011

5340-12-322-1206
Mounting Bracket

123221206
4131390: RNCC: 3 | RNVC: 2
S12B.K02.54.00.000: RNCC: 5 | RNVC: 2

25 Jul 1990

5340-12-360-8936
Loop Holder

123608936
2730 5248 00: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-172-7508

5340-12-329-6181
Electrical-Mechanical Equipment Post

123296181
VG95148B8XM4X50-PA: RNCC: 2 | RNVC: 2
VG95148B8XM4X50-PA: RNCC: 3 | RNVC: 2
0827-5000: RNCC: 3 | RNVC: 2

9 Sep 1992

5340-12-334-0770
Helical Compression Spring Retainer

123340770
617615/01: RNCC: 3 | RNVC: 2
617615: RNCC: 5 | RNVC: 9

17 Mar 1994

5340-12-147-2153
Webbing Strap

121472153
2376-9700.00: RNCC: 2 | RNVC: 2
2376-9700.00: RNCC: 3 | RNVC: 2
2376-9700-00: RNCC: 3 | RNVC: 2
2376-9700-00: RNCC: 5 | RNVC: 9
2376-9700.00: RNCC: 5 | RNVC: 9
000-A3-25X3,0X900-BW-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-701-4217
Mounting Bracket

127014217
VG95211-ML-127014217: RNCC: 2 | RNVC: 2
5.12.5312.1101.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5522
Loop Clamp

127025522
VG95211-ML-127025522: RNCC: 2 | RNVC: 2
5.51.7220.0203.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-321-4889
Mending Plate

123214889
702-237940-906-0: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-702-5468
Mounting Bracket

127025468
VG95211-ML-127025468: RNCC: 2 | RNVC: 2
5.51.7211.0090.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-148-7865
Mending Plate

121487865
1246-1.2: RNCC: 2 | RNVC: 2
1246-1.2: RNCC: 3 | RNVC: 2
1246-1-2: RNCC: 5 | RNVC: 2
1246-1-2: RNCC: 5 | RNVC: 2
1246-1-2: RNCC: 5 | RNVC: 9
1246-1.2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-4579
Detent Plunger

123174579
1000192-09 0 15000.01: RNCC: 2 | RNVC: 2
1000192-09 0 15000.01: RNCC: 3 | RNVC: 2
1000192-09 0 15000.01: RNCC: 5 | RNVC: 9

11 Apr 1989

5340-12-187-3042
Dust And Moisture Seal Protective Cap

121873042
5801114-2.009: RNCC: 3 | RNVC: 2
5801114-2-009: RNCC: 5 | RNVC: 2

26 Mar 1981

5340-12-317-3693
Mounting Bracket

123173693
00467-001-000: RNCC: 3 | RNVC: 2
467-01: RNCC: 5 | RNVC: 9

3 Apr 1989

5340-12-192-6079
Nonmetallic Bumper

121926079
5835-211.003: RNCC: 3 | RNVC: 2
5835-211-003: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-313-3282
Bow Handle

123133282
1900037-70-02: RNCC: 2 | RNVC: 2
352846: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-12-303-5577
Mending Plate

123035577
3-70VG85027: RNCC: 2 | RNVC: 2
HALTERING 3-70VG85027: RNCC: 5 | RNVC: 2

4 Apr 1985

5340-12-349-9899
Support Hook

123499899
2500238-162120.004.0: RNCC: 2 | RNVC: 2
2500238-162120.004.0: RNCC: 3 | RNVC: 2

3 Feb 2000

5340-12-178-2117
Angle Bracket

121782117
12729-13000.014: RNCC: 2 | RNVC: 2
12729-13000.014: RNCC: 3 | RNVC: 2
12729-13000-014: RNCC: 5 | RNVC: 2
12729-13000-014: RNCC: 5 | RNVC: 9

26 Mar 1979

5340-12-176-4887
Halter

121764887
0414 0077: RNCC: 3 | RNVC: 2
4140077KZ0148-21: RNCC: 5 | RNVC: 2
4140078UE0148-21: RNCC: 5 | RNVC: 2
4140077: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-198-0443
Mending Plate

121980443
C42080-A6-C109: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-365-1300
Retaining Strap

123651300
536519-0322.000: RNCC: 2 | RNVC: 2
536519-0322.000: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-12-377-8447
Butt Hinge

123778447
4100007-150710.002: RNCC: 3 | RNVC: 2

16 Feb 2009

5340-12-353-9884
Loop Clamp

123539884
3902038981: RNCC: 3 | RNVC: 2
39-020-38-981: RNCC: 5 | RNVC: 2

23 May 2001

5340-12-198-2921
Mending Plate

121982921
C42080-A6-C115: RNCC: 3 | RNVC: 2

11 Jan 1984

5340-12-329-0733
Loop Clamp

123290733
DIN3015-LB-K-2R-16-PP-W1: RNCC: 2 | RNVC: 2
SP216PP-IS: RNCC: 3 | RNVC: 2
RAPR2-216: RNCC: 3 | RNVC: 2
RAPR2-216: RNCC: 5 | RNVC: 2
SP216PPIS: RNCC: 5 | RNVC: 2

17 Jul 1992

5340-12-329-4803
Nonmetallic Bumper

123294803
A-616777-009: RNCC: 3 | RNVC: 2
A616777-009: RNCC: 5 | RNVC: 2

22 Aug 1992

5340-12-146-5017
Snap Hook

121465017
DIN5299-A80BK: RNCC: 2 | RNVC: 2
DIN5299-A80-ROH: RNCC: 3 | RNVC: 2
YDX-5001 1/2-80 BLANK: RNCC: 3 | RNVC: 9
A80DIN5299BLANK: RNCC: 5 | RNVC: 2
4369: RNCC: 5 | RNVC: 2
5001 1/2-80 BLANK: RNCC: 5 | RNVC: 9
5001-1-2-80: RNCC: 5 | RNVC: 9
DX-5001 1/2-80 BLANK: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-156-2823
Spring Tension Clip

121562823
25704-190470.02.0: RNCC: 2 | RNVC: 2
25704-190470.02.0: RNCC: 3 | RNVC: 2
25704-190470-02-0: RNCC: 5 | RNVC: 2
25704-190470-02-0: RNCC: 5 | RNVC: 9
25704-190470.02.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-4563
Casement Fastener

123054563
1000-U7/U1/23/24/991: RNCC: 3 | RNVC: 2
0.29.6200.0/0.26.1103.0: RNCC: 3 | RNVC: 2
200-9005-9102-0901-1001-0002: RNCC: 3 | RNVC: 2

8 Nov 1985

5340-12-191-1702
Sealing Plug Assembly

121911702
5562650/4: RNCC: 3 | RNVC: 2
5562650/4A: RNCC: 5 | RNVC: 2
5562650-4: RNCC: 5 | RNVC: 9

18 Jan 1982

5340-12-190-2826
Spring Tension Clip

121902826
T054915295-00-2: RNCC: 3 | RNVC: 2
491.52.95-00/2: RNCC: 5 | RNVC: 2
4915295-00-2: RNCC: 5 | RNVC: 2
5529500: RNCC: 5 | RNVC: 2
SV-0059-48: RNCC: 5 | RNVC: 2
T054915295-00-2: RNCC: 5 | RNVC: 9

17 Nov 1981

5340-12-329-0953
Elastic Strap

123290953
2350-040200.000.0: RNCC: 2 | RNVC: 2
2350-040200.000.0: RNCC: 3 | RNVC: 2

18 Jul 1992

5340-12-193-8321
Mending Plate

121938321
2300094-180600.02.0: RNCC: 3 | RNVC: 2
2300094-180600.02.0: RNCC: 5 | RNVC: 2
2300094-180600-02-0: RNCC: 5 | RNVC: 9
2300094-180600.02.0: RNCC: 5 | RNVC: 9

6 Sep 1982

5340-12-312-8934
Loop Clamp

123128934
DIN3016-2-G1-80X9-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-80X9-W1-2: RNCC: 3 | RNVC: 2
SP80/9ZY: RNCC: 3 | RNVC: 2
01210000080: RNCC: 5 | RNVC: 2
1210000080: RNCC: 5 | RNVC: 2
DIN3016-G1-80X9-W1-2: RNCC: 5 | RNVC: 9
VG95931-G80X9-W1: RNCC: 5 | RNVC: 9

17 Feb 1988

5340-12-179-1796
Mounting Bracket

121791796
5801113-5-002: RNCC: 3 | RNVC: 2
5801113-5.002: RNCC: 5 | RNVC: 2

15 Jun 1979

5340-12-358-7371
Mounting Bracket

123587371
2800-392000.017.0: RNCC: 2 | RNVC: 2
2800-392000.017.0: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-314-8572
Spring Tension Clip

123148572
2360-261112.03.0: RNCC: 2 | RNVC: 2
2360-261112.03.0: RNCC: 3 | RNVC: 2
2360-261112.03.0: RNCC: 5 | RNVC: 2

19 Aug 1988

5340-12-092-2476

5340-12-360-2946
Mounting Bracket

123602946
2422305058: RNCC: 3 | RNVC: 2
5001850232: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-385-4151
Access Cover

123854151
5550180711: RNCC: 3 | RNVC: 2

31 May 2011

5340-12-198-5499
Mending Plate

121985499
CF 328 632 -X: RNCC: 3 | RNVC: 2
CF3286320X: RNCC: 5 | RNVC: 2
CF 328 632 -X: RNCC: 5 | RNVC: 2
CF3286320X: RNCC: 5 | RNVC: 2
CF 328 632 -X: RNCC: 5 | RNVC: 2
CF3286320X: RNCC: 5 | RNVC: 2

8 Feb 1984

5340-12-334-8312
Runner

123348312
WRSOM0413: RNCC: 3 | RNVC: 2

24 Jun 1994

5340-12-318-2439
Mounting Bracket

123182439
3218300114: RNCC: 3 | RNVC: 2

22 Jun 1989

5340-12-369-5743
Spacing Threaded Standoff

123695743
AM408: RNCC: 3 | RNVC: 2

26 Jul 2006

5340-12-043-7138

5340-12-340-5194
Lock-Release Lever

123405194
5900740127: RNCC: 3 | RNVC: 2
5900740127: RNCC: 5 | RNVC: 2
5900740127: RNCC: 5 | RNVC: 2

25 Apr 1996

5340-12-196-6048
Butt Hinge Leaf

121966048
81626902001: RNCC: 3 | RNVC: 2
0007.35.16164: RNCC: 5 | RNVC: 2
81.62690.2001: RNCC: 5 | RNVC: 2

21 Jul 1983

5340-12-130-0396

5340-12-331-6270
Spacing Threaded Standoff

123316270
105-45235: RNCC: 3 | RNVC: 2

1 Jun 1993

5340-12-314-2038
Mending Plate

123142038
272.317 756: RNCC: 2 | RNVC: 2
272.317.756: RNCC: 3 | RNVC: 2
272.317 756: RNCC: 5 | RNVC: 9

16 Jun 1988

5340-12-371-1780
Retaining Bail

123711780
2277-310000B04B: RNCC: 3 | RNVC: 2

23 Feb 2007

5340-12-339-1373
Protection Bellows

123391373
4359877443: RNCC: 3 | RNVC: 2

16 Oct 1995

5340-12-303-5785
Retaining Strap

123035785
52.0261.550.01: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-315-0209
Dust And Moisture Seal Protective Cap

123150209
66.3513.200.04-A001: RNCC: 3 | RNVC: 2
374449: RNCC: 5 | RNVC: 2

8 Sep 1988

5340-12-388-3890
Dust And Moisture Seal Protective Cover

123883890
000-234: RNCC: 3 | RNVC: 2

16 Mar 2012

5340-12-168-1607
Retaining Strap

121681607
WW410718: RNCC: 3 | RNVC: 2
WW410718: RNCC: 5 | RNVC: 2
WW 410 718: RNCC: 5 | RNVC: 2
WW410718: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-311-5146
Access Cover

123115146
5846468: RNCC: 3 | RNVC: 2
584.6468: RNCC: 5 | RNVC: 2

11 Sep 1987

5340-12-334-7477
Angle Bracket

123347477
4014 003 051: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-12-157-2723

5340-12-337-2257
Double Angle Bracket

123372257
1243078: RNCC: 3 | RNVC: 2
243 078: RNCC: 5 | RNVC: 2
243078: RNCC: 5 | RNVC: 9
243 078: RNCC: 5 | RNVC: 9
1-2961-10-4: RNCC: 5 | RNVC: 9

3 Feb 1995

5340-12-360-8673
Dust And Moisture Seal Protective Cover

123608673
83-8231: RNCC: 3 | RNVC: 2

17 Jul 2003

5340-12-156-0438
Butt Hinge Leaf

121560438
167550501: RNCC: 3 | RNVC: 2
7101-73-02-11: RNCC: 5 | RNVC: 2
7101-73-02.11: RNCC: 5 | RNVC: 2
7101-73-02-11: RNCC: 5 | RNVC: 9
7101-73-02.11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-172-2526
Flush Catch Claw

121722526
VG95136B2-35X20-TEIL 3: RNCC: 2 | RNVC: 2
VG95136B2-35X20-TEIL 3: RNCC: 3 | RNVC: 2
602K0210-3: RNCC: 3 | RNVC: 2
VG95136B2-35X20-TEIL 3: RNCC: 5 | RNVC: 9

4 Jan 1978

5340-12-182-9713
Clamp Bolt Assembly

121829713
5801697-24200.00: RNCC: 3 | RNVC: 2
5801697-24200-00: RNCC: 5 | RNVC: 2
5801697-24200.00: RNCC: 5 | RNVC: 9

11 Mar 1980

5340-12-384-9724
Rod End Clevis

123849724
160-88563-01: RNCC: 3 | RNVC: 2
15160-88563.01: RNCC: 5 | RNVC: 2

14 Apr 2011

5340-12-153-5602
Rod End Clevis

121535602
100355-168000.03: RNCC: 2 | RNVC: 2
100355-168000.03: RNCC: 3 | RNVC: 2
100355-168000-03: RNCC: 5 | RNVC: 2
100355-168000-03: RNCC: 5 | RNVC: 9
100355-168000-03: RNCC: 5 | RNVC: 9
100355-168000.03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-4276
Hand Crank

123194276
1000192-00 0 00300: RNCC: 2 | RNVC: 2
1000192-00 0 00300: RNCC: 3 | RNVC: 2
1000192-00 0 00300: RNCC: 5 | RNVC: 9

2 Oct 1989

5340-12-172-7569
Retaining Strap

121727569
23290-204160.002: RNCC: 2 | RNVC: 2
23290-204160-002: RNCC: 5 | RNVC: 2
23290-204160-002: RNCC: 5 | RNVC: 9

20 Feb 1978

5340-12-702-4214
Angle Bracket

127024214
VG95211-ML-127024214: RNCC: 2 | RNVC: 2
5.12.7203.0040.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-185-4053
Butt Hinge Leaf

121854053
C324A19B31: RNCC: 3 | RNVC: 2
C324-A19-B31: RNCC: 5 | RNVC: 2

3 Oct 1980

5340-12-364-3914
Mounting Bracket

123643914
5981-182200.012.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-384-6753
Spring Loaded Cylinder Fastener

123846753
GN514-6-AK: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-12-341-2109
Runner

123412109
2500262-194300.000.0: RNCC: 2 | RNVC: 2
2500262-194300.000.0: RNCC: 3 | RNVC: 2

9 Aug 1996

5340-12-371-4563
Angle Bracket

123714563
23302-142000.61: RNCC: 2 | RNVC: 2
23302-142000.61: RNCC: 3 | RNVC: 2
4-0018-562: RNCC: 5 | RNVC: 2
8406774: RNCC: 5 | RNVC: 2

2 Apr 2007

5340-12-701-3090
Mounting Bracket

127013090
VG95211-ML-127013090: RNCC: 2 | RNVC: 2
5.12.5101.6710.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6295
Angle Bracket

127016295
VG95211-ML-127016295: RNCC: 2 | RNVC: 2
5.12.7050.0040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-344-6963
Detent Plunger

123446963
44-0201-2029: RNCC: 3 | RNVC: 2
Z=44-0201-2029: RNCC: 5 | RNVC: 9
44.0201.2029: RNCC: 5 | RNVC: 9

1 Dec 1997

5340-12-323-2228
Door Handle

123232228
100016735: RNCC: 3 | RNVC: 2
01.48319-00000.11.4: RNCC: 5 | RNVC: 2

2 Nov 1990

5340-12-362-2747
Double Angle Bracket

123622747
J27420038-403: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-387-1497
Mounting Bracket

123871497
5242030038: RNCC: 3 | RNVC: 2

10 Nov 2011

5340-12-319-3851
Nonmetallic Bumper

123193851
5801411-6909.007: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-164-8549
Loop Clamp

121648549
RAPG8-325: RNCC: 3 | RNVC: 2
RAPG8-325: RNCC: 3 | RNVC: 2
RAPE8-325-GLATT: RNCC: 5 | RNVC: 2
RAPE8-325-GLATT: RNCC: 5 | RNVC: 2
VG95932DA-3-25-PP-W1-AS-SPV: RNCC: 5 | RNVC: 9
VG95932A3-25-PP-W1-SPV-OHNE DP: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-7477
Handwheel

123127477
5500-314-017-0: RNCC: 3 | RNVC: 2
5500-314-017-0-520: RNCC: 5 | RNVC: 2

2 Feb 1988

5340-12-347-8278
Dust And Moisture Seal Protective Cover

123478278
T18-0003-001: RNCC: 3 | RNVC: 2

18 Feb 1999

5340-12-149-1120
Resilient Mount

121491120
71100301: RNCC: 3 | RNVC: 2
521K02703: RNCC: 3 | RNVC: 2
521K02703C1.MS: RNCC: 5 | RNVC: 2
845-521K02703: RNCC: 5 | RNVC: 2
28202232512: RNCC: 5 | RNVC: 2
8202232512: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-183-9947
Mending Plate

121839947
333004-3211.000: RNCC: 2 | RNVC: 2
333004-3211.000: RNCC: 3 | RNVC: 2
1255-32100.001: RNCC: 5 | RNVC: 2
1255-32100-001: RNCC: 5 | RNVC: 9
1255-32100.001: RNCC: 5 | RNVC: 9
333004-3211.000: RNCC: 5 | RNVC: 9
1255-32100-001: RNCC: 5 | RNVC: 9
1255-32100.001: RNCC: 5 | RNVC: 9

10 Jun 1980

5340-12-314-7807
Nonmetallic Bumper

123147807
C42107-A435-B18: RNCC: 3 | RNVC: 2
35630182: RNCC: 3 | RNVC: 2

10 Aug 1988

5340-12-343-5057
Mounting Plate

123435057
4900347-202610.01: RNCC: 2 | RNVC: 2
4900347-202610.01: RNCC: 3 | RNVC: 2

30 Jun 1997

5340-12-321-8749
Angle Bracket

123218749
23290-041000.016: RNCC: 2 | RNVC: 2
9858787: RNCC: 3 | RNVC: 2
23290-041000.016: RNCC: 5 | RNVC: 2
23290-041000.016: RNCC: 5 | RNVC: 9
9858787: RNCC: 5 | RNVC: 9

5 Jul 1990

5340-12-310-1586
Pipe Bracket

123101586
80000641: RNCC: 3 | RNVC: 2
80000641EZ5002-51: RNCC: 5 | RNVC: 2
8000 0641: RNCC: 5 | RNVC: 2

13 Apr 1987

5340-12-185-6682
Double Angle Bracket

121856682
42036299: RNCC: 3 | RNVC: 2
42036299ED5091-29: RNCC: 5 | RNVC: 2

23 Oct 1980

5340-12-340-5182
Access Cover

123405182
11.01288-0005: RNCC: 3 | RNVC: 2
11.01288-0005: RNCC: 5 | RNVC: 2
11.01288-0005: RNCC: 5 | RNVC: 2

25 Apr 1996

5340-12-335-3873
Runner

123353873
347-110-013: RNCC: 2 | RNVC: 2
347-110-013: RNCC: 3 | RNVC: 2

16 Aug 1994

5340-12-339-8595
Angle Bracket

123398595
5800748-11211: RNCC: 3 | RNVC: 2

25 Jan 1996

5340-12-138-4471
Friction Catch Stud Receptacle

121384471
AWENTW2610A33: RNCC: 3 | RNVC: 2
AWENTW2610A33: RNCC: 5 | RNVC: 2
AWENTW2610A33: RNCC: 5 | RNVC: 2
AWENTW2610A33: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-359-3208
Handle Grip

123593208
32727650283: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-12-345-4455
Mounting Bracket

123454455
54.0053.239.00: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-12-375-8358
Loop Clamp

123758358
9002439A: RNCC: 3 | RNVC: 2

9 Jul 2008

5340-12-378-4126
Retaining Strap

123784126
41015460: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-12-320-7981
Mounting Plate

123207981
0216 3210: RNCC: 3 | RNVC: 2
1284-149: RNCC: 5 | RNVC: 2
2163210EC0150-46: RNCC: 5 | RNVC: 2

16 Feb 1990

5340-12-178-8308
Electrical-Mechanical Equipment Post

121788308
01TC33115: RNCC: 3 | RNVC: 2

18 May 1979

5340-12-165-7283
Helical Compression Spring Seat

121657283
306S51003: RNCC: 3 | RNVC: 2

22 Jun 1976

5340-12-193-4654
Retaining Strap

121934654
0005469644: RNCC: 3 | RNVC: 2

22 Jul 1982

5340-12-380-3408
Manual Control Lever

123803408
4257520728: RNCC: 3 | RNVC: 2

21 Oct 2009

5340-12-373-8577
Extension Drawer Slide

123738577
9BEZ005810P1: RNCC: 3 | RNVC: 2

13 Dec 2007

5340-12-359-7334
Mounting Bracket

123597334
S281M3037101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-384-8014
Leveling Screw Set

123848014
4801-0022: RNCC: 3 | RNVC: 2

30 Mar 2011

5340-12-344-4483
Mounting Bracket

123444483
P-296880-066: RNCC: 3 | RNVC: 2
P296880-066: RNCC: 5 | RNVC: 2

28 Oct 1997

5340-12-371-8770
Multiple Angle Bracket

123718770
1505661: RNCC: 3 | RNVC: 2
548-060221.00.0: RNCC: 5 | RNVC: 2
15009726: RNCC: 5 | RNVC: 2

24 May 2007

5340-12-195-0792
Angle Bracket

121950792
C72165-A421-C150: RNCC: 3 | RNVC: 2
C72165A421C150: RNCC: 5 | RNVC: 2

11 Jan 1983

5340-12-313-1904
Dust And Moisture Seal Protective Cap

123131904
WFGS10A: RNCC: 3 | RNVC: 2
WFG-S10A: RNCC: 5 | RNVC: 2

10 Mar 1988

5340-12-300-1935
Nonmetallic Bumper

123001935
6100128-1100.002: RNCC: 2 | RNVC: 2
837-6100128-1100.002: RNCC: 3 | RNVC: 2
0740051094: RNCC: 3 | RNVC: 2

14 Jul 1984

5340-12-330-9462
Mending Plate

123309462
2718-000000.020.0: RNCC: 2 | RNVC: 2
2718-000000.020.0: RNCC: 3 | RNVC: 2

2 Mar 1993

5340-12-334-9210
Retaining Strap

123349210
SM 26/38: RNCC: 3 | RNVC: 2
2259389: RNCC: 3 | RNVC: 2
2036/38: RNCC: 5 | RNVC: 2
5L.4994.004.40: RNCC: 5 | RNVC: 2

4 Jul 1994

5340-12-185-6175
Dust And Moisture Seal Protective Cap

121856175
646390620067: RNCC: 3 | RNVC: 2
3246-043: RNCC: 5 | RNVC: 2
3246043: RNCC: 5 | RNVC: 2

21 Oct 1980

5340-12-324-9789
Swivel Caster

123249789
340B33G125BZGD-M12: RNCC: 3 | RNVC: 2
340B33G125BZGDM12: RNCC: 5 | RNVC: 2

17 Apr 1991

5340-12-701-2146
Mounting Plate

127012146
VG95211-ML-127012146: RNCC: 2 | RNVC: 2
5.12.0605.0320.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-159-1558
Door Button

121591558
REM0103-252: RNCC: 3 | RNVC: 2
REM0103-252: RNCC: 5 | RNVC: 2
REM0103-252: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-332-4184
Mounting Bracket

123324184
480-7345-08-00-21: RNCC: 3 | RNVC: 2
480/7345-08-00-21: RNCC: 5 | RNVC: 2

10 Aug 1993

5340-12-170-6794
Expansion Plug

121706794
DIN443-26-ST-PHR: RNCC: 2 | RNVC: 2
26DIN443PHR: RNCC: 5 | RNVC: 2

27 Jul 1977

5340-12-329-9081
Spring Tension Clip

123299081
UK 14244 PHOIMP: RNCC: 3 | RNVC: 2
C22121-Z1200-C7: RNCC: 5 | RNVC: 9

10 Oct 1992

5340-12-166-5630
Retaining Band

121665630
8409268: RNCC: 3 | RNVC: 2
1603-323: RNCC: 5 | RNVC: 2
1603323: RNCC: 5 | RNVC: 2

24 Sep 1976

5340-12-371-2983
Mounting Bracket

123712983
8350-0309: RNCC: 2 | RNVC: 2
8350-0309: RNCC: 3 | RNVC: 2

12 Mar 2007

5340-12-322-5090
Angle Bracket

123225090
2079-111000.08B: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-343-5000
Mending Plate

123435000
5080-249: RNCC: 3 | RNVC: 2
F300 0T 022 4825: RNCC: 6 | RNVC: 9

26 Jun 1997

5340-12-313-6953
Elastic Cord Assembly

123136953
VF4184-00600-045: RNCC: 3 | RNVC: 2
VF4184-00600-045: RNCC: 5 | RNVC: 2

27 Apr 1988

5340-12-157-1858
Resilient Mount

121571858
4L84-00-025: RNCC: 3 | RNVC: 2
4L84-00-025: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-9328
Access Door Hinge

123599328
2500261-187980.002.0: RNCC: 2 | RNVC: 2
2500261-187980.002.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-701-4863
Mounting Plate

127014863
VG95211-ML-127014863: RNCC: 2 | RNVC: 2
5.12.5811.8130.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-300-8560
Ball Socket Seat

123008560
DIN71805-B16: RNCC: 2 | RNVC: 2
TK-BA35-5340-379: RNCC: 2 | RNVC: 2
DIN71805-B16: RNCC: 3 | RNVC: 2
M 0262 5320: RNCC: 5 | RNVC: 2
MO 262 5320: RNCC: 5 | RNVC: 2
B16DIN71805ST: RNCC: 5 | RNVC: 2

5 Sep 1984

5340-12-358-2037
Bow Handle

123582037
2500262-191500.002.0: RNCC: 2 | RNVC: 2
2500262-191500.002.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-185-2505
Mending Plate

121852505
1000093-35061.03.0: RNCC: 2 | RNVC: 2
1000093-35061.03.0: RNCC: 3 | RNVC: 2
1000093-35061-03-0: RNCC: 5 | RNVC: 2
1000093-35061-03-0: RNCC: 5 | RNVC: 9
1000093-35061.03.0: RNCC: 5 | RNVC: 9

25 Sep 1980

5340-12-179-5474
Angle Bracket

121795474
C381-A26-C59: RNCC: 2 | RNVC: 2
C381A26C59: RNCC: 3 | RNVC: 2
C381-A26-C59: RNCC: 5 | RNVC: 2
C381A26C59: RNCC: 5 | RNVC: 2
C381-A26-C59: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-171-1600
Detent Plunger

121711600
81910200408: RNCC: 3 | RNVC: 2
23230-052604-001-0: RNCC: 5 | RNVC: 9
23230-052604.001.0: RNCC: 5 | RNVC: 9

12 Sep 1977

5340-12-125-1353
Retaining Strap

121251353
8403378: RNCC: 3 | RNVC: 2
0047-022: RNCC: 5 | RNVC: 2
0047022: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-310-4859
Mending Plate

123104859
2300227-345000.001: RNCC: 2 | RNVC: 2
2300227-345000.001: RNCC: 3 | RNVC: 2
2300227-345000.001: RNCC: 5 | RNVC: 9

26 May 1987

5340-12-043-2724

5340-12-335-7924
Extension Drawer Slide

123357924
5.043.574.9: RNCC: 3 | RNVC: 2
5.043.574.9: RNCC: 5 | RNVC: 2

15 Sep 1994

5340-12-319-5024
Mending Plate

123195024
4900059-751400.001.0: RNCC: 3 | RNVC: 2
1227758: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-361-2999
Dust And Moisture Seal Protective Cap

123612999
803M24X1,5: RNCC: 3 | RNVC: 2
GPN803M24X1,5: RNCC: 5 | RNVC: 2
05479: RNCC: 5 | RNVC: 2

15 Sep 2003

5340-12-362-3836
Access Cover

123623836
2500261-993130.003.0: RNCC: 2 | RNVC: 2
2500261-993130.003.0: RNCC: 3 | RNVC: 2

16 Feb 2004

5340-12-192-9805
Double Angle Bracket

121929805
4617901330: RNCC: 3 | RNVC: 2
726 1 75 177 2: RNCC: 5 | RNVC: 9

9 Jun 1982

5340-12-172-6623
Dust And Moisture Seal Protective Cap-Plug

121726623
610U13: RNCC: 3 | RNVC: 2
GPN610U13: RNCC: 5 | RNVC: 2
47304: RNCC: 5 | RNVC: 2
9560111690: RNCC: 5 | RNVC: 2
GPN610U13: RNCC: 5 | RNVC: 2
610001300: RNCC: 5 | RNVC: 9
GPN610,U13: RNCC: 5 | RNVC: 9
U13: RNCC: 5 | RNVC: 9
U13GPN610: RNCC: 5 | RNVC: 9

8 Feb 1978

5340-12-177-9910
Dust And Moisture Seal Protective Cap-Plug

121779910
WFGM18A: RNCC: 3 | RNVC: 2

13 Mar 1979

5340-12-379-9109
Block Clamp

123799109
58080103: RNCC: 3 | RNVC: 2
CV169108: RNCC: 5 | RNVC: 2
58080103: RNCC: 5 | RNVC: 2

11 Sep 2009

5340-12-379-8672
Dust And Moisture Seal Protective Plug

123798672
D0730GPN 300 V112: RNCC: 3 | RNVC: 2
82960020057: RNCC: 5 | RNVC: 2

8 Sep 2009

5340-12-181-1397
Pad Eye

121811397
51192020046: RNCC: 3 | RNVC: 2
51.19202.0046: RNCC: 5 | RNVC: 2

29 Oct 1979

5340-12-343-0885
Helical Compression Spring Seat

123430885
4100 6003: RNCC: 3 | RNVC: 2
41006003: RNCC: 5 | RNVC: 2
41006003ED50-4237: RNCC: 5 | RNVC: 2

28 Apr 1997

5340-12-347-5002
Folding Stay

123475002
344464626: RNCC: 3 | RNVC: 2

18 Dec 1998

5340-12-198-8070
Shock Mount Pad

121988070
3147660297: RNCC: 3 | RNVC: 2

28 Feb 1984

5340-12-345-5863
Mounting Plate

123455863
TA3104P002: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-302-1846
Dust And Moisture Seal Protective Cap

123021846
4229870245: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-357-1508
Retaining Clip

123571508
090.33: RNCC: 3 | RNVC: 2

13 May 2002

5340-12-373-1377
Track Stop

123731377
102101: RNCC: 3 | RNVC: 2

2 Oct 2007

5340-12-326-9517
Retaining Clip

123269517
164503: RNCC: 3 | RNVC: 2

13 Nov 1991

5340-12-043-2680

5340-12-385-3618
Manual Control Lever

123853618
5550611319: RNCC: 3 | RNVC: 2

26 May 2011

5340-12-043-5934

5340-12-313-2958
Access Cover

123132958
250148-360010.00.0: RNCC: 3 | RNVC: 2

18 Mar 1988

5340-12-701-6312
Mounting Bracket

127016312
VG95211-ML-127016312: RNCC: 2 | RNVC: 2
5.12.7050.0080.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-320-6078
Access Door

123206078
140-131000-001-0: RNCC: 3 | RNVC: 2
066761-760: RNCC: 5 | RNVC: 2

30 Jan 1990

5340-12-701-2855
Mounting Bracket

127012855
VG95211-ML-127012855: RNCC: 2 | RNVC: 2
5.12.5101.1260.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-311-2951
Access Cover

123112951
987-111000.02.0: RNCC: 3 | RNVC: 2
987-111000.02.0: RNCC: 5 | RNVC: 9

13 Aug 1987

5340-12-701-7861
Mounting Bracket

127017861
VG95211-ML-127017861: RNCC: 2 | RNVC: 2
5.12.7803.8020.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-305-2086
Metal Runner

123052086
8135904980: RNCC: 3 | RNVC: 2
95-75609-4: RNCC: 5 | RNVC: 2

8 Oct 1985

5340-12-321-4281
Strap Hinge Leaf

123214281
7068-58100-014-2: RNCC: 3 | RNVC: 2

17 May 1990

5340-12-701-9442
Rod End Clevis

127019442
VG95211-ML-127019442: RNCC: 2 | RNVC: 2
5.12.0605.0370.00: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-152-2999
Retaining Strap

121522999
5800400-0070-007: RNCC: 3 | RNVC: 2
6P358-70-7: RNCC: 5 | RNVC: 2
5800400-0070-007: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-309-5452
Mending Plate

123095452
A-230130-013: RNCC: 3 | RNVC: 2
A230130-013: RNCC: 5 | RNVC: 2

3 Feb 1987

5340-12-166-1542
Nonmetallic Bumper

121661542
59006201: RNCC: 3 | RNVC: 2
ME235/135KERN-B-QUALRTEIIKOMPLET: RNCC: 3 | RNVC: 2
103-210-028: RNCC: 5 | RNVC: 2
ME235-135KERNBQUALRTE2K0MPLETT: RNCC: 5 | RNVC: 2
ME235-135KERNBQUALRTE2K0MPLETT: RNCC: 5 | RNVC: 2

10 Aug 1976

5340-12-701-6870
Multiple Angle Bracket

127016870
VG95211-ML-127016870: RNCC: 2 | RNVC: 2
5.12.7220.2214.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-198-2678
Angle Bracket

121982678
23302-185100: RNCC: 2 | RNVC: 2
23302-185100.00: RNCC: 2 | RNVC: 2
2609283: RNCC: 3 | RNVC: 2
3-2609-283: RNCC: 5 | RNVC: 2

6 Jan 1984

5340-12-354-4426
Mechanical Stop

123544426
3NG2392273: RNCC: 3 | RNVC: 2
HH/3NG2392273-E: RNCC: 5 | RNVC: 2

12 Jul 2001

5340-12-131-0635
Angle Bracket

121310635
E0144-16-10-03: RNCC: 3 | RNVC: 2
0144-16-10-03: RNCC: 5 | RNVC: 2
0335 9137: RNCC: 5 | RNVC: 2
3359137: RNCC: 5 | RNVC: 9
3359137EE0144-16: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-369-4971
Angle Bracket

123694971
5232000840: RNCC: 3 | RNVC: 2
15010278: RNCC: 5 | RNVC: 2

12 Jul 2006

5340-12-321-4707
Access Cover

123214707
2713901: RNCC: 3 | RNVC: 2

22 May 1990

5340-12-316-4205
Angle Bracket

123164205
51-52225: RNCC: 3 | RNVC: 2

17 Jan 1989

5340-12-350-7375
Mounting Plate

123507375
10063-212000.07: RNCC: 3 | RNVC: 2
10063-212000.07: RNCC: 5 | RNVC: 9

12 May 2000

5340-12-092-3154

5340-12-392-2777
Cushioning Pad

123922777
3005153: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-309-1941
Mending Plate

123091941
5800044-1030.03: RNCC: 2 | RNVC: 2
5800044-1030.03: RNCC: 3 | RNVC: 2

22 Dec 1986

5340-12-335-3108
Mounting Bracket

123353108
0048-222000A02B: RNCC: 2 | RNVC: 2
0048-222000A02B: RNCC: 3 | RNVC: 2

9 Aug 1994

5340-12-376-2338
Mounting Bracket

123762338
4615206741: RNCC: 3 | RNVC: 2

29 Aug 2008

5340-12-338-4272
Bail Handle

123384272
610-100: RNCC: 3 | RNVC: 2
0745010312: RNCC: 5 | RNVC: 2
610-100: RNCC: 5 | RNVC: 2

7 Jul 1995

5340-12-366-5752
Dust And Moisture Seal Protective Cap

123665752
250/83: RNCC: 3 | RNVC: 2
GPN250/83: RNCC: 5 | RNVC: 2

10 May 2005

5340-12-333-8536
Helical Compression Spring Seat

123338536
2060-0000-01: RNCC: 3 | RNVC: 2
40356: RNCC: 5 | RNVC: 2

17 Feb 1994

5340-12-386-5732
Dust And Moisture Seal Protective Cap

123865732
S81515-00: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-156-9275
Double Angle Bracket

121569275
23176-120000-19-0: RNCC: 2 | RNVC: 2
23176-120000-19-0: RNCC: 5 | RNVC: 2
23176-120000.19.0: RNCC: 5 | RNVC: 2
23176-120000-19-0: RNCC: 5 | RNVC: 2
23176-120000.19.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-3569
Mending Plate

123063569
A-230609-017: RNCC: 3 | RNVC: 2
A230609-017: RNCC: 5 | RNVC: 2

24 Feb 1986

5340-12-343-7128
Retaining Strap

123437128
DIN3016-F1-90X20-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU2.90/20-W1: RNCC: 3 | RNVC: 2
DIN3016-F1-90X20-W1-2: RNCC: 5 | RNVC: 2
RSGU1200.90/20: RNCC: 5 | RNVC: 2
RSGU2.90/20: RNCC: 5 | RNVC: 2

17 Jul 1997

5340-12-323-9219
Retaining Strap

123239219
2142090: RNCC: 3 | RNVC: 2
61753920: RNCC: 3 | RNVC: 2
SILVYN SSH9: RNCC: 5 | RNVC: 2
SSH9: RNCC: 5 | RNVC: 2

9 Jan 1991

5340-12-188-9618
Retaining Strap

121889618
T50517: RNCC: 3 | RNVC: 2
T50517: RNCC: 5 | RNVC: 9

12 Aug 1981

5340-12-361-5591
Access Cover

123615591
1506798: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-12-364-8873
Bow Handle

123648873
3544.6243.00: RNCC: 3 | RNVC: 2

12 Nov 2004

5340-12-365-3909
Mounting Bracket

123653909
2500267-331100.002.0: RNCC: 2 | RNVC: 2
2500267-331100.002.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-317-7760
Access Cover

123177760
4/0439/7360/2: RNCC: 3 | RNVC: 2

11 May 1989

5340-12-322-2538
Rigid Caster

123222538
40 0165 582: RNCC: 2 | RNVC: 2
40 0165 582: RNCC: 3 | RNVC: 2
04.54150-10010.00.3: RNCC: 5 | RNVC: 9
40 0165 582: RNCC: 5 | RNVC: 9

6 Aug 1990

5340-12-371-4431
Dust And Moisture Seal Protective Cap

123714431
SKM ZUBS 4 FS: RNCC: 3 | RNVC: 2
006403153: RNCC: 5 | RNVC: 2

30 Mar 2007

5340-12-332-9863
Access Cover

123329863
M552154-1: RNCC: 3 | RNVC: 9

19 Oct 1993

5340-12-300-8555
Angle Bracket

123008555
1423-910.78(5): RNCC: 3 | RNVC: 2

5 Sep 1984

5340-12-304-1823
Webbing Strap

123041823
01151-1-SCHLAUFE-FE1250MM: RNCC: 3 | RNVC: 2
C122-A11-B8: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-1250: RNCC: 5 | RNVC: 2
C122A11B8: RNCC: 5 | RNVC: 2
DIN60060-1-25X1250-C3/SCHLAUFE: RNCC: 5 | RNVC: 9

21 Jun 1985

5340-12-187-6090
Loop Clamp

121876090
5562808/4: RNCC: 3 | RNVC: 2
5562808/4A: RNCC: 5 | RNVC: 2
5562808-4: RNCC: 5 | RNVC: 9

21 Apr 1981

5340-12-309-3558
Loop Clamp

123093558
DIN3016-1-E1-8X12-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU0.8/12: RNCC: 3 | RNVC: 2
DIN3016-E1-8X12-W1-2: RNCC: 3 | RNVC: 2
09400012008: RNCC: 5 | RNVC: 2
9400012008: RNCC: 5 | RNVC: 2
RSGU8/12: RNCC: 5 | RNVC: 2
DIN3016-E1-8X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-E8X12-W1: RNCC: 5 | RNVC: 9

19 Jan 1987

5340-12-196-1232
Resilient Mount

121961232
DIN95363-E50X50-NR55ST: RNCC: 2 | RNVC: 2
1.50.50.3B.55NR/ST: RNCC: 5 | RNVC: 2
81170-50X50-M10X25.NR55.ST: RNCC: 5 | RNVC: 2
57811580015: RNCC: 5 | RNVC: 2
781158MITTEL: RNCC: 5 | RNVC: 2
503137: RNCC: 5 | RNVC: 2
VG95363-E50X50-NR55ST: RNCC: 5 | RNVC: 9

1 Jun 1983

5340-12-383-3649
Flush Catch Claw

123833649
38012-1110.04/M: RNCC: 2 | RNVC: 2
38012-1110.04/M: RNCC: 5 | RNVC: 2

12 Oct 2010

5340-12-354-5397
Angle Bracket

123545397
A-050760-003: RNCC: 3 | RNVC: 2
A050760-003: RNCC: 5 | RNVC: 2

25 Jul 2001

5340-12-357-5442
Webbing Strap

123575442
SR-220-109/1,5M+2XSP252: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-701-4527
Loop Clamp

127014527
VG95211-ML-127014527: RNCC: 2 | RNVC: 2
5.12.5314.1000.22: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-167-1004
Loop Clamp

121671004
DIN3016-1-B1-45X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-B1-45X20-W1-2: RNCC: 3 | RNVC: 2
RS0.45/20: RNCC: 3 | RNVC: 2
4100020045: RNCC: 5 | RNVC: 2
RS45-20: RNCC: 5 | RNVC: 2
RS45/20: RNCC: 5 | RNVC: 2
DIN3016-B1-45X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-B45X20-W1: RNCC: 5 | RNVC: 9
VG95931B45X20W1: RNCC: 5 | RNVC: 9

23 Nov 1976

5340-12-314-5816
Shimmy Damper

123145816
16-4 163/125/A16-B16/700: RNCC: 3 | RNVC: 2
377651: RNCC: 3 | RNVC: 2
274068: RNCC: 5 | RNVC: 2

20 Jul 1988

5340-12-331-5117
Runner

123315117
U100-3231-003: RNCC: 2 | RNVC: 2
U100-3231-003: RNCC: 3 | RNVC: 2

12 May 1993

5340-12-301-9683
Butt Hinge Leaf

123019683
4-109346: RNCC: 3 | RNVC: 2
216101: RNCC: 5 | RNVC: 2

21 Nov 1984

5340-12-162-7969
Double Angle Bracket

121627969
1918-121155-009: RNCC: 2 | RNVC: 2
1918-121155-009: RNCC: 5 | RNVC: 2
1918-121155.009: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-168-5461
Dust And Moisture Seal Protective Cap

121685461
1120524000: RNCC: 3 | RNVC: 2
1 120 524 000: RNCC: 5 | RNVC: 2
81254310061: RNCC: 5 | RNVC: 2
0001540685: RNCC: 5 | RNVC: 2
81.25431-0061: RNCC: 5 | RNVC: 2
0001540685: RNCC: 5 | RNVC: 2
1120524000: RNCC: 5 | RNVC: 2
VDPM00579: RNCC: 5 | RNVC: 2
1120524000: RNCC: 5 | RNVC: 2

18 Mar 1977

5340-12-303-2429
Mending Plate

123032429
P-886764-003: RNCC: 3 | RNVC: 2
P886764-003: RNCC: 5 | RNVC: 2

8 Mar 1985

5340-12-191-0753
Spring Tension Clip

121910753
1281/15071.04: RNCC: 2 | RNVC: 2
087-03/60374: RNCC: 3 | RNVC: 2
1281/15071.04: RNCC: 5 | RNVC: 9
087-03/60374: RNCC: 5 | RNVC: 9

11 Jan 1982

5340-12-327-2818
Dust And Moisture Seal Protective Cap

123272818
5803702-108300.01: RNCC: 2 | RNVC: 2
7802180256: RNCC: 3 | RNVC: 2
78021 80256: RNCC: 5 | RNVC: 9

7 Jan 1992

5340-12-306-9004
Mending Plate

123069004
E4-2009010: RNCC: 3 | RNVC: 2
E4-2009010: RNCC: 5 | RNVC: 9

16 Apr 1986

5340-12-187-2090
Resilient Mount

121872090
K24978-00-944: RNCC: 3 | RNVC: 2
K24978-00-944: RNCC: 5 | RNVC: 9

11 Mar 1981

5340-12-332-8473
Webbing Strap

123328473
79017/026-2000-300: RNCC: 3 | RNVC: 2
79017/026-2000-0300: RNCC: 3 | RNVC: 2
79017/026-2000-0300: RNCC: 5 | RNVC: 9
DIN60060-2-25X300X1700-C4/D2: RNCC: 5 | RNVC: 9

27 Sep 1993

5340-12-364-2978
Retaining Bail

123642978
2500267-068140.000.0: RNCC: 3 | RNVC: 2

8 Sep 2004

5340-12-161-3129
Turnbuckle Body

121613129
DIN1480-SP5/8IN-ST: RNCC: 2 | RNVC: 2
SPMU-DIN1480-5/8IN-ROH: RNCC: 3 | RNVC: 2
B5-8INDIN1480: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-8502
Loop Clamp

127018502
VG95211-ML-127018502: RNCC: 2 | RNVC: 2
5192A-43: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-387-4535
Permanent Magnet

123874535
SENSORPLAETTCHEN M8: RNCC: 3 | RNVC: 2

19 Dec 2011

5340-12-141-6033
Buckle

121416033
3220066: RNCC: 3 | RNVC: 2
151.630: RNCC: 5 | RNVC: 2
0.034.370.001: RNCC: 5 | RNVC: 2
56161: RNCC: 5 | RNVC: 2
02457: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-136-3436
Dust And Moisture Seal Protective Plug

121363436
269001100043: RNCC: 3 | RNVC: 2
269001100043: RNCC: 5 | RNVC: 2
N0200041: RNCC: 5 | RNVC: 2
N200041: RNCC: 5 | RNVC: 2
N020004.1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-349-8047
Handle Grip

123498047
46 71 2 310 401: RNCC: 3 | RNVC: 2

11 Jan 2000

5340-12-388-1315
Butt Hinge Leaf

123881315
10124-207010.001.0: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-12-197-0525
Rigid Caster

121970525
9126.003.4: RNCC: 3 | RNVC: 2

14 Sep 1983

5340-12-320-7467
Loop Clamp

123207467
3550.991.3: RNCC: 3 | RNVC: 2
D179.081.4: RNCC: 5 | RNVC: 9

13 Feb 1990

5340-12-317-6523
Retaining Strap

123176523
R99083D: RNCC: 3 | RNVC: 2
069130521A: RNCC: 5 | RNVC: 2

26 Apr 1989

5340-12-354-0232
Spacing Threaded Standoff

123540232
506 072 08 24: RNCC: 3 | RNVC: 2

29 May 2001

5340-12-353-4834
Access Cover

123534834
5802017-715500.00: RNCC: 2 | RNVC: 2
5802017-715500.00: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-12-318-3926
Nonmetallic Bumper

123183926
52.1405.100.11: RNCC: 3 | RNVC: 2

10 Jul 1989

5340-12-354-3269
Access Cover

123543269
741178: RNCC: 3 | RNVC: 2
06460P002006: RNCC: 5 | RNVC: 2

2 Jul 2001

5340-12-181-6255
Angle Bracket

121816255
CF 453 472: RNCC: 2 | RNVC: 2
CF 453 472: RNCC: 3 | RNVC: 2
CF453472: RNCC: 5 | RNVC: 2
CF 453 472: RNCC: 5 | RNVC: 2
CF453472: RNCC: 5 | RNVC: 2
CF 453 472: RNCC: 5 | RNVC: 2
CF453472: RNCC: 5 | RNVC: 2

10 Dec 1979

5340-12-374-4379
Padlock

123744379
165/40: RNCC: 3 | RNVC: 2

18 Feb 2008

5340-12-361-2953
Handle Grip

123612953
CBD45087G01: RNCC: 3 | RNVC: 2

15 Sep 2003

5340-12-361-4795
Access Cover

123614795
98839: RNCC: 3 | RNVC: 2
37.00648: RNCC: 5 | RNVC: 2

7 Oct 2003

5340-12-359-8232
Mounting Bracket

123598232
291827164A: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-12-361-9452
Butt Hinge

123619452
218-9110: RNCC: 3 | RNVC: 2

8 Dec 2003

5340-12-325-5488
Protection Bellows

123255488
6522680197: RNCC: 3 | RNVC: 2

17 Jun 1991

5340-12-322-0329
Mending Plate

123220329
2513.000.09: RNCC: 3 | RNVC: 2
101553: RNCC: 5 | RNVC: 2

19 Jul 1990

5340-12-307-7143
Angle Bracket

123077143
8450036515: RNCC: 3 | RNVC: 2
84500 36515: RNCC: 5 | RNVC: 9

18 Jul 1986

5340-12-332-7993
Mounting Plate

123327993
160-75334: RNCC: 3 | RNVC: 2
160-75334: RNCC: 5 | RNVC: 9

21 Sep 1993

5340-12-354-4425
Mounting Plate

123544425
5NG2392185: RNCC: 3 | RNVC: 2

12 Jul 2001

5340-12-344-7162
Mounting Plate

123447162
AFG002479: RNCC: 3 | RNVC: 2

2 Dec 1997

5340-12-177-0163
Rod End Connector

121770163
51981030016: RNCC: 3 | RNVC: 2
5000273359: RNCC: 5 | RNVC: 2
5000273359: RNCC: 5 | RNVC: 9

3 Jan 1979

5340-12-186-3423
Strap Hinge

121863423
5054MMCH: RNCC: 3 | RNVC: 2

17 Dec 1980

5340-12-360-2095
Loop Clamp

123602095
2140101: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-352-7132
Access Cover

123527132
64416351: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-315-6289
Retaining Strap

123156289
2500-319100.22: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-12-365-5865
Angle Bracket

123655865
J29120140-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-328-9090
Handle Grip

123289090
2653-189320.00: RNCC: 2 | RNVC: 2
2653-189320.00: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-308-2894
Webbing Strap

123082894
5802017-703600.01: RNCC: 2 | RNVC: 2
5802017-703600.01: RNCC: 3 | RNVC: 2
000-E4-20X2,0X800-PE-RAL6031: RNCC: 6 | RNVC: 9

24 Sep 1986

5340-12-393-3392
Section Block Clamp

123933392
1030124-620000.005.0: RNCC: 3 | RNVC: 2

10 Sep 2013

5340-12-322-6552
Handle Grip

123226552
3.0073.2.391: RNCC: 3 | RNVC: 2
TYP 391: RNCC: 5 | RNVC: 2

10 Sep 1990

5340-12-375-3833
Mounting Bracket

123753833
2 0077-251: RNCC: 3 | RNVC: 2
2 0077-251: RNCC: 5 | RNVC: 2

27 May 2008

5340-12-197-3355
Double Angle Bracket

121973355
86-1559-201100.003.0: RNCC: 3 | RNVC: 2
86-1559-201100.003.0: RNCC: 5 | RNVC: 9

13 Oct 1983

5340-12-342-7625
Multiple Angle Bracket

123427625
1207 0943: RNCC: 3 | RNVC: 2
12070944UE0111-90: RNCC: 5 | RNVC: 9
3-601-9-600-006-5: RNCC: 5 | RNVC: 9
3.601.9.600.006.5: RNCC: 5 | RNVC: 9

26 Mar 1997

5340-12-185-1875
Halter

121851875
5801357-2011.00: RNCC: 2 | RNVC: 2
5801357-2011.00: RNCC: 3 | RNVC: 2
5801357-2011-00: RNCC: 5 | RNVC: 2
5801357-2011-00: RNCC: 5 | RNVC: 9
5801357-2011-00: RNCC: 5 | RNVC: 9

18 Sep 1980

5340-12-312-4796
Electrical-Mechanical Equipment Post

123124796
VG95148C8XM5X35-2.0380.30: RNCC: 2 | RNVC: 2
VG95148C8XM5X35-2.0380.30: RNCC: 3 | RNVC: 2
M5X35X8X10X10MS: RNCC: 3 | RNVC: 2

12 Jan 1988

5340-12-369-8305
Mending Plate

123698305
SK872-199000.004.0: RNCC: 3 | RNVC: 2
7081439: RNCC: 5 | RNVC: 2

21 Aug 2006

5340-12-364-6644
Hinge Torsion Bar

123646644
2500262-190700.001.0: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-311-8658
Loop Clamp

123118658
TC-354: RNCC: 3 | RNVC: 2
TC354: RNCC: 5 | RNVC: 2

26 Oct 1987

5340-12-164-1033
Loop Clamp

121641033
DIN3016-1-D2-12-12X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-12-12X12-W1-2: RNCC: 3 | RNVC: 2
RSGU1.2X12/12-W1: RNCC: 3 | RNVC: 2
4219212012: RNCC: 5 | RNVC: 2
RSGU1.2X12/12: RNCC: 5 | RNVC: 2
RSGU1100-2X12-12: RNCC: 5 | RNVC: 2
RSGU1100.2X12/12: RNCC: 5 | RNVC: 2
DIN3016-D2-12-12X12-W1-2: RNCC: 5 | RNVC: 9
DIN3016-D2-12-12X12W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5637
Mounting Bracket

127025637
VG95211-ML-127025637: RNCC: 2 | RNVC: 2
5.51.7612.0050.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-7118
Angle Bracket

127017118
VG95211-ML-127017118: RNCC: 2 | RNVC: 2
5.12.7601.3110.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-393-2927
Angle Bracket

123932927
J92228337-401: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-349-3906
Dust And Moisture Seal Protective Cap-Plug

123493906
325G-11-T2: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-12-365-3903
Mounting Bracket

123653903
2500278-190000.048.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-308-9387
Case Corner

123089387
P-244714-752: RNCC: 3 | RNVC: 2
P244714-752: RNCC: 5 | RNVC: 2

28 Nov 1986

5340-12-701-8126
Mounting Plate

127018126
VG95211-ML-127018126: RNCC: 2 | RNVC: 2
5.12.9201.0512.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-2029
Access Cover

123582029
2500262-000200.003.0: RNCC: 2 | RNVC: 2
2500262-000200.003.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-330-2364
Multiple Angle Bracket

123302364
117-070-1006-4: RNCC: 3 | RNVC: 2
140589: RNCC: 5 | RNVC: 2

18 Nov 1992

5340-12-387-3898
Mounting Bracket

123873898
D2056201-BUND: RNCC: 3 | RNVC: 2

8 Dec 2011

5340-12-393-7172
Mounting Bracket

123937172
11.44143-0089: RNCC: 3 | RNVC: 2
11.44143-0089: RNCC: 5 | RNVC: 2

7 Oct 2013

5340-12-317-3228
Butt Hinge Leaf

123173228
4900064-41224.003: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-383-9261
Mounting Plate

123839261
601241-201410.01: RNCC: 2 | RNVC: 2
601241-201410.01: RNCC: 3 | RNVC: 2

22 Dec 2010

5340-12-701-2496
Mounting Bracket

127012496
VG95211-ML-127012496: RNCC: 2 | RNVC: 2
5.12.3610.8020.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-350-8444
Mounting Bracket

123508444
105-94122.05: RNCC: 3 | RNVC: 2

29 May 2000

5340-12-188-9437
Electrical-Mechanical Equipment Post

121889437
900B5016-000-02: RNCC: 3 | RNVC: 2

11 Aug 1981

5340-12-387-1399
Access Cover

123871399
Z=G2 06483A: RNCC: 3 | RNVC: 2

9 Nov 2011

5340-12-301-5170
Metal Runner

123015170
1000163-371040.004.0: RNCC: 2 | RNVC: 2
1000163-371040.004.0: RNCC: 3 | RNVC: 2

20 Oct 1984

5340-12-164-0983
Nonmetallic Bumper

121640983
37X8X0-5: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-308-9031
Electrical-Mechanical Equipment Post

123089031
VG95148A6XM4X184,3-1,4021: RNCC: 2 | RNVC: 2
KM.S01-210100.018: RNCC: 3 | RNVC: 2
VG95148A6XM4X184,3-1,4021: RNCC: 3 | RNVC: 2

27 Nov 1986

5340-12-702-5413
Angle Bracket

127025413
VG95211-ML-127025413: RNCC: 2 | RNVC: 2
5.51.7210.0009.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-5563
Mounting Plate

127025563
VG95211-ML-127025563: RNCC: 2 | RNVC: 2
5.51.7230.0210.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-339-0930
Mounting Bracket

123390930
4900319-202310.00: RNCC: 2 | RNVC: 2
4900319-202310.00: RNCC: 3 | RNVC: 2

10 Oct 1995

5340-12-323-8640
Electronic Equipment Hardware Kit

123238640
M382232: RNCC: 3 | RNVC: 9
M382232: RNCC: 5 | RNVC: 2

2 Jan 1991

5340-12-356-1909
Double Angle Bracket

123561909
T341M1001210: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-369-4466
Door Holder

123694466
851206: RNCC: 3 | RNVC: 2

5 Jul 2006

5340-12-333-0025
Retaining Strap

123330025
5VC4843: RNCC: 3 | RNVC: 2
1003232: RNCC: 3 | RNVC: 2
604-23MM: RNCC: 5 | RNVC: 2

20 Oct 1993

5340-12-131-0634
Loop Clamp

121310634
0335 9135: RNCC: 3 | RNVC: 2
0144-16-10-01: RNCC: 5 | RNVC: 2
3359135EE0144-16: RNCC: 5 | RNVC: 2
K0.00335-9135: RNCC: 5 | RNVC: 2
K0003359135: RNCC: 5 | RNVC: 2
4795388: RNCC: 5 | RNVC: 2
3359135: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-354-8349
Mechanical Stop

123548349
5400049-116820.03: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-330-2573
Protection Bellows

123302573
V6-739-42CR764: RNCC: 3 | RNVC: 2

21 Nov 1992

5340-12-356-3810
Runner

123563810
2125-121421A02B: RNCC: 2 | RNVC: 2
2125-121421A02B: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-12-318-8201
Mending Plate

123188201
42341806: RNCC: 3 | RNVC: 2
42341806EE55-2244: RNCC: 5 | RNVC: 2

18 Aug 1989

5340-12-344-1074
Double Angle Bracket

123441074
2300421-330010.008: RNCC: 2 | RNVC: 2
9919659: RNCC: 3 | RNVC: 2
2300421-330010.008: RNCC: 5 | RNVC: 2
2300421-330010.008: RNCC: 5 | RNVC: 9
9919659: RNCC: 5 | RNVC: 9

12 Sep 1997

5340-12-356-7433
Angle Bracket

123567433
T622M1003212: RNCC: 3 | RNVC: 2
1027246: RNCC: 5 | RNVC: 9

2 Apr 2002

5340-12-131-5586

5340-12-354-1201
Access Cover

123541201
00988110: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-12-147-4480
Retaining Strap

121474480
112EX3: RNCC: 3 | RNVC: 2
112EX3: RNCC: 3 | RNVC: 2
112EX3: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-183-7213
Electrical-Mechanical Equipment Post

121837213
CF 404 988 B: RNCC: 2 | RNVC: 2
CF 404 988 B: RNCC: 3 | RNVC: 2
CF 404 988 B: RNCC: 5 | RNVC: 2
CF404988B: RNCC: 5 | RNVC: 2
CF 404 988 B: RNCC: 5 | RNVC: 2
CF404988B: RNCC: 5 | RNVC: 2
CF404988B: RNCC: 5 | RNVC: 2

15 May 1980

5340-12-701-6068
Mounting Plate

127016068
VG95211-ML-127016068: RNCC: 2 | RNVC: 2
5.12.7003.0090.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-188-9456
Detent Plunger

121889456
2500075-191040.003.0: RNCC: 2 | RNVC: 2
2500075-191040.003.0: RNCC: 3 | RNVC: 2
2500075-191040-003-0: RNCC: 5 | RNVC: 9
2500075-191040.003.0: RNCC: 5 | RNVC: 9
2500075-191040-003-0: RNCC: 5 | RNVC: 9

11 Aug 1981

5340-12-319-6742
Access Cover

123196742
SK527-990110.006.0: RNCC: 2 | RNVC: 2
SK527-990110.006.0: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-12-328-9754
Loop Clamp

123289754
DIN3016-1-D2-40-40X20-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.2X40/20-W1: RNCC: 3 | RNVC: 2
RSGU1.2X40/20: RNCC: 5 | RNVC: 2
DIN3016-D2-40-40X20-W1-2: RNCC: 5 | RNVC: 9

4 Jul 1992

5340-12-123-2815
Loop Clamp

121232815
KN628-80-16: RNCC: 3 | RNVC: 2
E5112-75-05-02: RNCC: 5 | RNVC: 2
03411638: RNCC: 5 | RNVC: 2
3411638EE5049-75: RNCC: 5 | RNVC: 2
5112-75-05-02: RNCC: 5 | RNVC: 2
5112-75-05.02: RNCC: 5 | RNVC: 2
5112-75-05-02: RNCC: 5 | RNVC: 9
5112-75-05.02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-320-3085
Webbing Strap

123203085
5802106-201323.00: RNCC: 2 | RNVC: 2
5802106-201323.00: RNCC: 5 | RNVC: 9

29 Dec 1989

5340-12-305-1328
Metal Runner

123051328
4900059-111130.004.0: RNCC: 3 | RNVC: 2
1228083: RNCC: 5 | RNVC: 2

1 Oct 1985

5340-12-195-8775
Pad Eye

121958775
1237-411.001: RNCC: 2 | RNVC: 2
1237-411.001: RNCC: 3 | RNVC: 2
150488: RNCC: 5 | RNVC: 2
1237-411-001: RNCC: 5 | RNVC: 2
1237-411.001: RNCC: 5 | RNVC: 9

26 Apr 1983

5340-12-315-7899
Mending Plate

123157899
P-087196-003: RNCC: 3 | RNVC: 2
P087196-003: RNCC: 5 | RNVC: 2

26 Nov 1988

5340-12-171-1994
Detent Plunger

121711994
0036422: RNCC: 3 | RNVC: 2
036422: RNCC: 5 | RNVC: 2
306-020-70-120: RNCC: 5 | RNVC: 2
81.67120-0002: RNCC: 5 | RNVC: 2
81671200002: RNCC: 5 | RNVC: 2
23251-200651.002.0: RNCC: 5 | RNVC: 9
23251-200651-002-0: RNCC: 5 | RNVC: 9

16 Sep 1977

5340-12-171-8461
Webbing Strap

121718461
NO PRIMARY REF 12-171-8461: RNCC: 3 | RNVC: 2
23230-062185.000.0: RNCC: 5 | RNVC: 2
983 045-257: RNCC: 5 | RNVC: 2
81.96802-4026: RNCC: 5 | RNVC: 2
81968024026: RNCC: 5 | RNVC: 2
23230-062185-000-0: RNCC: 5 | RNVC: 9
23230-062185.000.0: RNCC: 5 | RNVC: 9
23230-062185.000.0: RNCC: 5 | RNVC: 9
000-D6-20X1,5X160-PE-RAL6031: RNCC: 6 | RNVC: 9

22 Nov 1977

5340-12-702-5297
Mounting Bracket

127025297
VG95211-ML-127025297: RNCC: 2 | RNVC: 2
5.51.7020.0320.07: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-360-6866
Dust And Moisture Seal Protective Cap

123606866
1873-101000.010.0: RNCC: 3 | RNVC: 2

30 Jun 2003

5340-12-199-9295
Loop Clamp

121999295
NO PRIMARY REF 12-199-9295: RNCC: 3 | RNVC: 2
RAPE10-218-GLATT: RNCC: 5 | RNVC: 2
HR2LB1-18.0/1-GLATT UND TM6: RNCC: 5 | RNVC: 2
RAPE10-218-GLATT: RNCC: 5 | RNVC: 2
H-SM218PP-IS: RNCC: 5 | RNVC: 2
HRGL2B1TM18PP ST BL: RNCC: 5 | RNVC: 9
RAPG10-218: RNCC: 5 | RNVC: 9
RAPG10-218: RNCC: 5 | RNVC: 9
SM218PPH-IS: RNCC: 5 | RNVC: 9
DIN3515-LF2G-18PPW1-IS SCHRAUBE: RNCC: 5 | RNVC: 9

19 Jun 1984

5340-12-311-2545
Nut And Bolt Locking Plate

123112545
14888-655: RNCC: 3 | RNVC: 2
5920050112: RNCC: 5 | RNVC: 2
KB-14888-655: RNCC: 5 | RNVC: 2

11 Aug 1987

5340-12-340-7749
Access Cover

123407749
5801984-200330.000.0: RNCC: 2 | RNVC: 2
5801984-200330.000.0: RNCC: 3 | RNVC: 2
5801984-200330.000.0: RNCC: 3 | RNVC: 2
5801984-200330.000.0: RNCC: 5 | RNVC: 2
7800752630: RNCC: 5 | RNVC: 2
5801984-200330.000.0: RNCC: 5 | RNVC: 2
78007 52630: RNCC: 5 | RNVC: 9

11 Jun 1996

5340-12-701-4461
Mounting Bracket

127014461
VG95211-ML-127014461: RNCC: 2 | RNVC: 2
5.12.5313.8190.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-162-5879
Resilient Mount

121625879
DIN95363-F20X20-NR55ST: RNCC: 2 | RNVC: 2
1.20.20.2C.55NR/ST: RNCC: 5 | RNVC: 2
81180-20X20-M6.NR55.ST: RNCC: 5 | RNVC: 2
BE4-01: RNCC: 5 | RNVC: 9
VG95363-F20X20-NR55ST: RNCC: 5 | RNVC: 9
VG95363F20X20NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5382
Angle Bracket

127025382
VG95211-ML-127025382: RNCC: 2 | RNVC: 2
5.51.7204.1280.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-357-2085
Mechanical Stop

123572085
331315: RNCC: 3 | RNVC: 2

22 May 2002

5340-12-183-1260
Buckle

121831260
R23290: RNCC: 3 | RNVC: 2
R23290: RNCC: 5 | RNVC: 9

20 Mar 1980

5340-12-337-4486
Mounting Bracket

123374486
9842157: RNCC: 3 | RNVC: 9
374-186611.000: RNCC: 5 | RNVC: 9

6 Mar 1995

5340-12-322-7630
Manual Control Handle

123227630
8100397-2500: RNCC: 2 | RNVC: 2
8100397-2500: RNCC: 3 | RNVC: 2

19 Sep 1990

5340-12-190-6793
Access Cover

121906793
E4-2000991: RNCC: 3 | RNVC: 2
E4-2000991: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-161-3565
Loop Clamp

121613565
RSIM58-5/9: RNCC: 3 | RNVC: 2
4417001058: RNCC: 5 | RNVC: 2
RSIM58-5-9: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-176-3230
Electrical-Mechanical Equipment Post

121763230
CF 417 640 A: RNCC: 2 | RNVC: 2
VG95148A5XM3X12,2-NRST: RNCC: 2 | RNVC: 2
VG95148A5XM3X12,2-NRST: RNCC: 3 | RNVC: 2
536056-0566.000: RNCC: 3 | RNVC: 2
CF 417 640 A: RNCC: 3 | RNVC: 2
CF 417 640 A: RNCC: 5 | RNVC: 2
CF417640A: RNCC: 5 | RNVC: 2
CF 417 640 A: RNCC: 5 | RNVC: 2
CF417640A: RNCC: 5 | RNVC: 2
CF417640A: RNCC: 5 | RNVC: 2

23 Nov 1978

5340-12-157-0916
Resilient Mount

121570916
DIN95363-B70X45-NR55ST: RNCC: 2 | RNVC: 2
510046-M10X30.NR55.ST: RNCC: 5 | RNVC: 2
20290/B-BSTN5590: RNCC: 5 | RNVC: 2
20290/V-BSTN5590: RNCC: 5 | RNVC: 2
20290VFI65: RNCC: 5 | RNVC: 2
20290VFJ65: RNCC: 5 | RNVC: 2
20290VSM550: RNCC: 5 | RNVC: 2
20290/V,NR55ST: RNCC: 5 | RNVC: 2
VG95363B70X45NR55ST: RNCC: 5 | RNVC: 9
VG95363-B70X45-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-134-1607
Loop Clamp

121341607
E5757-31-01-07: RNCC: 3 | RNVC: 2
5757-31-01-07: RNCC: 5 | RNVC: 2
5757-31-01.07: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-146-3883
Butt Hinge Leaf

121463883
C30324A350C17: RNCC: 3 | RNVC: 2
C30324-A350-C17: RNCC: 5 | RNVC: 2
FGSCHRK350T17: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-325-2509
Nonmetallic Bumper

123252509
2300061-053000.018: RNCC: 2 | RNVC: 2
2300061-053000.018: RNCC: 3 | RNVC: 2
2300061-053000.018: RNCC: 5 | RNVC: 2
2300061-053000.018: RNCC: 5 | RNVC: 9
2300061-053000.018: RNCC: 5 | RNVC: 9

22 May 1991

5340-12-331-4698
Mounting Plate

123314698
279.997 234: RNCC: 3 | RNVC: 2
1300839-070064: RNCC: 5 | RNVC: 9
279.997 234: RNCC: 5 | RNVC: 9

7 May 1993

5340-12-190-8291
Loop Clamp

121908291
SPGU6025.191/30SK: RNCC: 3 | RNVC: 2
1816025191: RNCC: 5 | RNVC: 2

17 Dec 1981

5340-12-313-3208
Nonmetallic Bumper

123133208
615.42-03-00-00-002: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-12-314-8238
Resilient Mount

123148238
DIN95363-A10X8-NR65ST: RNCC: 2 | RNVC: 2
1.10.8.1.65NR/ST: RNCC: 5 | RNVC: 2
500006-M4X10-NR65.ST: RNCC: 5 | RNVC: 2
AWN59-A8-NR65: RNCC: 5 | RNVC: 2
AWN59-A8-NR65: RNCC: 5 | RNVC: 2
811.000.010.008.04X9.NR65.ST: RNCC: 5 | RNVC: 2
AWN59-A8-NR65: RNCC: 5 | RNVC: 9
VG95363-A10X8-NR65ST: RNCC: 5 | RNVC: 9

13 Aug 1988

5340-12-370-8970
Mounting Bracket

123708970
82974860016: RNCC: 3 | RNVC: 2
82.97486-0016: RNCC: 5 | RNVC: 2
82.97486.0016: RNCC: 5 | RNVC: 2

15 Jan 2007

5340-12-172-8824
Electrical-Mechanical Equipment Post

121728824
VG95148B6XM3X30-ST: RNCC: 2 | RNVC: 2
VG95148B6XM3X30-ST: RNCC: 3 | RNVC: 2
0801-0500: RNCC: 3 | RNVC: 2
0801-05: RNCC: 5 | RNVC: 2
3512 712 34120: RNCC: 5 | RNVC: 2

27 Feb 1978

5340-12-702-3719
Mounting Bracket

127023719
VG95211-ML-127023719: RNCC: 2 | RNVC: 2
5.12.4805.2051.02: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-373-2184
Turnbuckle

123732184
365/7383-03-15-00: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-12-323-1137
Quick Release Plunger

123231137
GN615-M3-KN: RNCC: 3 | RNVC: 2
KNM3HWN205S: RNCC: 3 | RNVC: 2
03010-03: RNCC: 3 | RNVC: 2
RBN410.1-KN M3: RNCC: 3 | RNVC: 2
1603009: RNCC: 3 | RNVC: 2
509476: RNCC: 3 | RNVC: 2
HWN205-KN M3: RNCC: 5 | RNVC: 2
509476: RNCC: 5 | RNVC: 2
NLM301-03: RNCC: 5 | RNVC: 9
NLM3010-03: RNCC: 5 | RNVC: 9

24 Oct 1990

5340-12-338-9674
Butt Hinge

123389674
2300348-186132.000.0: RNCC: 2 | RNVC: 2
2300348-186132.000.0: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-12-181-2193
Angle Bracket

121812193
5802008-000000.003: RNCC: 2 | RNVC: 2
9322002-79: RNCC: 5 | RNVC: 2

31 Oct 1979

5340-12-302-1421
Webbing Strap

123021421
01811-Z.018-00.3-0001-00: RNCC: 3 | RNVC: 2
Z.018-00.3-0001-00: RNCC: 5 | RNVC: 2
018-00.3-0001-00: RNCC: 5 | RNVC: 2
500697: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-330-4037
Mounting Bracket

123304037
957-812000.00.0: RNCC: 3 | RNVC: 2

11 Dec 1992

5340-12-373-4693
Ball Socket Seat

123734693
1393001-30100-02: RNCC: 2 | RNVC: 2
1393001-30100.02: RNCC: 5 | RNVC: 2

6 Nov 2007

5340-12-393-0105
Manual Control Lever

123930105
1030105-202020.001.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-334-7016
Mounting Bracket

123347016
1A608.11-26-01-00-004: RNCC: 3 | RNVC: 2

10 Jun 1994

5340-12-703-0928
Angle Bracket

127030928
VG95211-ML-127030928: RNCC: 2 | RNVC: 2
2187A-56: RNCC: 3 | RNVC: 2
0500821769890: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-393-6870
Access Cover

123936870
11.29251-0011: RNCC: 3 | RNVC: 2
11.29251-0011: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-12-370-1495
Clamping Catch

123701495
BP-104-80D: RNCC: 3 | RNVC: 2

26 Sep 2006

5340-12-365-6307
Mounting Plate

123656307
J92228013-001: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-178-5847
Electrical-Mechanical Equipment Post

121785847
VG95148A2,6XM1,6X12,6-AL: RNCC: 2 | RNVC: 2
VG95148A2,6XM1,6X12,6-AL: RNCC: 3 | RNVC: 2
944-42-40-02: RNCC: 3 | RNVC: 2

3 May 1979

5340-12-309-8361
Access Cover

123098361
737-141141.00.0: RNCC: 3 | RNVC: 2
737-141141-00-0: RNCC: 5 | RNVC: 9
737-141141.00.0: RNCC: 5 | RNVC: 9

9 Mar 1987

5340-12-701-6006
Loop Clamp

127016006
VG95211-ML-127016006: RNCC: 2 | RNVC: 2
5.12.6601.0020.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-198-7774
Gummi- Riemen

121987774
2500082-194140.00.0: RNCC: 2 | RNVC: 2
2500082-194140.00.0: RNCC: 3 | RNVC: 2
2500082-194140-00-0: RNCC: 5 | RNVC: 2
2500082-194140.00.0: RNCC: 5 | RNVC: 2
98403401: RNCC: 5 | RNVC: 2
2500082-194140.00.0: RNCC: 5 | RNVC: 9
2500082-194140-00-0: RNCC: 5 | RNVC: 9
82300-S265X20-NR-STZN-SW: RNCC: 6 | RNVC: 9

24 Feb 1984

5340-12-357-5345
Mounting Bracket

123575345
2500266-198810.000.0: RNCC: 2 | RNVC: 2
2500266-198810.000.0: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-309-5076
Mending Plate

123095076
2300223-221420.00.0: RNCC: 2 | RNVC: 2
2300223-221420.00.0: RNCC: 3 | RNVC: 2

29 Jan 1987

5340-12-701-3026
Mounting Bracket

127013026
VG95211-ML-127013026: RNCC: 2 | RNVC: 2
5.12.5101.5180.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-168-2432
Rod End Connector

121682432
E4-6000230: RNCC: 3 | RNVC: 2
E4-6000230: RNCC: 5 | RNVC: 9

28 Feb 1977

5340-12-345-5089
Hand Crank

123455089
2125-129650A00C: RNCC: 2 | RNVC: 2
2125-129650A00C: RNCC: 3 | RNVC: 2

25 Mar 1998

5340-12-176-1911
Spring Tension Clip

121761911
CF 418 830 A: RNCC: 2 | RNVC: 2
CF 418 830 A: RNCC: 3 | RNVC: 2
CF 418 830 A: RNCC: 5 | RNVC: 2
CF418830A: RNCC: 5 | RNVC: 2
CF 418 830 A: RNCC: 5 | RNVC: 2
CF418830A: RNCC: 5 | RNVC: 2
CF418830A: RNCC: 5 | RNVC: 2

13 Nov 1978

5340-12-320-0763
Nonmetallic Bumper

123200763
E0967: RNCC: 3 | RNVC: 2
50271: RNCC: 5 | RNVC: 2

5 Dec 1989

5340-12-378-0614
Manual Control Lever

123780614
X 020.087 Z1001: RNCC: 3 | RNVC: 2

10 Mar 2009

5340-12-362-2784
Mending Plate

123622784
0328314030: RNCC: 3 | RNVC: 2
3KK906: RNCC: 5 | RNVC: 2
03.283.14.03.0: RNCC: 5 | RNVC: 2

2 Feb 2004

5340-12-371-4828
Angle Bracket

123714828
1508157: RNCC: 3 | RNVC: 2
548-820300.19.0: RNCC: 5 | RNVC: 2
15004852: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-12-196-2548
Angle Bracket

121962548
03585601: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-192-9806
Retaining Strap

121929806
4617910131: RNCC: 3 | RNVC: 2
726 1 75 185 1: RNCC: 5 | RNVC: 9

9 Jun 1982

5340-12-340-7369
Access Cover

123407369
2500226-271177.001.0: RNCC: 2 | RNVC: 2
2500226-271177.001.0: RNCC: 3 | RNVC: 2

1 Jun 1996

5340-12-366-3325
Mounting Plate

123663325
P-085065-754: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-12-388-7343
Runner

123887343
122W187600.004.0: RNCC: 2 | RNVC: 2
122W187600.004.0: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-12-348-3063
Retaining Bail

123483063
2435703010: RNCC: 3 | RNVC: 2
2.435.703.010: RNCC: 5 | RNVC: 2

27 May 1999

5340-12-308-0663
Hasp Staple

123080663
4402212: RNCC: 3 | RNVC: 2
4.457505: RNCC: 5 | RNVC: 2

28 Aug 1986

5340-12-701-7910
Mounting Bracket

127017910
5.12.7805.8010.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-197-9118
Double Angle Bracket

121979118
CF 325 700 B: RNCC: 2 | RNVC: 2
CF 325 700 B: RNCC: 3 | RNVC: 2
CF 325 700 A: RNCC: 5 | RNVC: 2
CF 325 700 B: RNCC: 5 | RNVC: 2
CF 325 700 A: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-380-2725
Dust And Moisture Seal Protective Cap

123802725
3390580032: RNCC: 3 | RNVC: 2

14 Oct 2009

5340-12-339-0214
Casement Fastener

123390214
35.41.012.00: RNCC: 3 | RNVC: 2
0008631014: RNCC: 5 | RNVC: 2

27 Sep 1995

5340-12-302-6768
Pipe Bracket

123026768
SP6318.125/20SKZ: RNCC: 3 | RNVC: 2
1516318125: RNCC: 5 | RNVC: 2

22 Jan 1985

5340-12-344-5913
Butt Hinge Leaf

123445913
J5282039-401: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-12-361-4289
Mounting Plate

123614289
2500262-190000.051.0: RNCC: 2 | RNVC: 2
2500262-190000.051.0: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-700-9231
Loop Clamp

127009231
VG95211-ML-127009231: RNCC: 2 | RNVC: 2
200N118-3: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-195-1335
Turnbuckle

121951335
2300128-121180.000.0: RNCC: 2 | RNVC: 2
2300128-121180.000.0: RNCC: 3 | RNVC: 2
2300128-121180.000.0: RNCC: 3 | RNVC: 2
98.002-16.00.4: RNCC: 3 | RNVC: 2
2300128-121180.000.0: RNCC: 5 | RNVC: 2
2300128-121180.000.0: RNCC: 5 | RNVC: 9

17 Jan 1983

5340-12-318-3852
Mounting Bracket

123183852
5600023-190232.000.0: RNCC: 2 | RNVC: 2
5600023-190232.000.0: RNCC: 3 | RNVC: 2
1271839: RNCC: 5 | RNVC: 2
22012.0.08.420.00: RNCC: 5 | RNVC: 9
22012.0.08.420.00: RNCC: 5 | RNVC: 9

10 Jul 1989

5340-12-700-6120
Flush Lock

127006120
VG95211-ML-127006120: RNCC: 2 | RNVC: 2
5.12.0100.2610.00: RNCC: 3 | RNVC: 2
0501400104449: RNCC: 5 | RNVC: 2

29 Sep 1992

5340-12-306-4447
Mending Plate

123064447
993-110512.102.0: RNCC: 3 | RNVC: 2
993-110512.102.0: RNCC: 5 | RNVC: 9

28 Feb 1986

5340-12-179-8245
Mending Plate

121798245
81907500501: RNCC: 3 | RNVC: 2

3 Aug 1979

5340-12-302-8323
Angle Bracket

123028323
4900123-1941.00: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-177-3682
Electrical-Mechanical Equipment Post

121773682
51-6861-240-05: RNCC: 3 | RNVC: 2

29 Jan 1979

5340-12-196-4794
Pad Eye

121964794
12729-12100.004: RNCC: 2 | RNVC: 2
12729-12100.004: RNCC: 3 | RNVC: 2
12729-12100-004: RNCC: 5 | RNVC: 2

11 Jul 1983

5340-12-325-0493
Electrical-Mechanical Equipment Post

123250493
C22107-A219-C11: RNCC: 3 | RNVC: 2
35628967: RNCC: 3 | RNVC: 2

26 Apr 1991

5340-12-300-5231
Helical Compression Spring Seat

123005231
E4-2013410: RNCC: 3 | RNVC: 2
E4-2013410: RNCC: 5 | RNVC: 9
E4-2013410: RNCC: 5 | RNVC: 9

9 Aug 1984

5340-12-151-5917
Webbing Strap

121515917
S772-25-00-600MMLGLIG22: RNCC: 3 | RNVC: 2
S772-25-00-600MMLG: RNCC: 5 | RNVC: 9
000-A1-25X2,0X600-PE-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-186-1464
Electrical-Mechanical Equipment Post

121861464
512206-4194.000: RNCC: 3 | RNVC: 2
512206-4194: RNCC: 5 | RNVC: 2
512206-4194-000: RNCC: 5 | RNVC: 2

2 Dec 1980

5340-12-324-9135
Engine Accessory Bracket

123249135
14.08.900-3: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-12-380-4812
Retaining Strap

123804812
1175122: RNCC: 3 | RNVC: 2

3 Nov 2009

5340-12-123-8451
Dust And Moisture Seal Protective Cap

121238451
111415835A: RNCC: 3 | RNVC: 2
111415835: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-316-8300
Mounting Bracket

123168300
2300279-5085.00: RNCC: 2 | RNVC: 2
2300279-5085.00: RNCC: 3 | RNVC: 2
2300279-5085.00: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-177-6188
Sicherheits Schlosz

121776188
5532: RNCC: 3 | RNVC: 2
SL42HV: RNCC: 5 | RNVC: 9

9 Feb 1979

5340-12-343-8594
Loop Clamp

123438594
0000 9620 009: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-12-348-6268
Lock-Release Lever

123486268
1924201: RNCC: 2 | RNVC: 2
1924201: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-12-043-3285

5340-12-339-4442
Spacing Threaded Standoff

123394442
2300264-202100.09.0: RNCC: 3 | RNVC: 2
2300 264-202.100.09.0: RNCC: 5 | RNVC: 9

23 Nov 1995

5340-12-323-2766
Resilient Mount

123232766
525-42208545-NR 60.STZN: RNCC: 3 | RNVC: 2
42208545: RNCC: 3 | RNVC: 2
BQ6.00-80X66X30-M14X1,5-NR60STZN: RNCC: 3 | RNVC: 9
42208545ED50-4245: RNCC: 5 | RNVC: 2

9 Nov 1990

5340-12-371-5738
Access Cover

123715738
SK861-061400.004.0: RNCC: 3 | RNVC: 2
1704456: RNCC: 5 | RNVC: 9

19 Apr 2007

5340-12-177-1358
Double Angle Bracket

121771358
5800822-071-016: RNCC: 3 | RNVC: 2
5800822-071.016: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-384-6215
Swivel Caster

123846215
6.435-116.0: RNCC: 3 | RNVC: 2

14 Mar 2011

5340-12-318-8826
Helical Compression Spring Seat

123188826
11.11072-0011: RNCC: 3 | RNVC: 2
11110720011: RNCC: 5 | RNVC: 2
F11.11072-0011: RNCC: 5 | RNVC: 2

22 Aug 1989

5340-12-701-8251
Mounting Plate

127018251
VG95211-ML-127018251: RNCC: 2 | RNVC: 2
5.84.6102.4120.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-309-4098
Stake Driving Cap

123094098
3042022: RNCC: 3 | RNVC: 2
TYP 1820/1 INCH: RNCC: 5 | RNVC: 2
LM-2819POS2: RNCC: 5 | RNVC: 9

22 Jan 1987

5340-12-365-1497
Mounting Bracket

123651497
2500278-197600.000.0: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-194-4215
Flush Lock

121944215
24.05.59: RNCC: 3 | RNVC: 2
310-015-1: RNCC: 5 | RNVC: 2

3 Nov 1982

5340-12-321-5609
Mounting Bracket

123215609
P-888521-407: RNCC: 3 | RNVC: 2
P888521-407: RNCC: 5 | RNVC: 2

1 Jun 1990

5340-12-307-7678
Bridge Clamp

123077678
512214-0341.000: RNCC: 3 | RNVC: 2
512214-0341: RNCC: 5 | RNVC: 2
51 22 14-0341: RNCC: 5 | RNVC: 2

24 Jul 1986

5340-12-320-7447
Access Cover

123207447
T01-5111A000D: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-12-182-0881
Loop Clamp

121820881
2211428801: RNCC: 3 | RNVC: 2
5801506-7024-002: RNCC: 5 | RNVC: 2
5801506-7024-002: RNCC: 5 | RNVC: 9
22114 28801: RNCC: 5 | RNVC: 9

14 Jan 1980

5340-12-385-6636
Mounting Plate

123856636
F1.4211-50-30-00.00-24: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-12-331-6884
Mounting Bracket

123316884
480-7397-26-17-00: RNCC: 3 | RNVC: 2
480/7397-26-17-00: RNCC: 5 | RNVC: 2

8 Jun 1993

5340-12-183-8490
Strap Fastener Loop

121838490
6900012-400-01: RNCC: 2 | RNVC: 2
6900012-400-01: RNCC: 5 | RNVC: 2

24 May 1980

5340-12-330-3610
Filler Opening Cap

123303610
5 4210 0120: RNCC: 3 | RNVC: 2
5.4210.0120: RNCC: 5 | RNVC: 2

5 Dec 1992

5340-12-359-9510
Mounting Bracket

123599510
2500261-850310.002.0: RNCC: 2 | RNVC: 2
2500261-850310.002.0: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-12-170-2501
Retaining Strap

121702501
PAN4231EE3822: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-145-6720

5340-12-316-2994
Rod End Clevis

123162994
6383432: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-377-2779
Mounting Bracket

123772779
41269353: RNCC: 3 | RNVC: 2

23 Dec 2008

5340-12-359-0472
Manual Control Lever

123590472
3817500290: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-199-4819
Access Cover

121994819
7801850005: RNCC: 3 | RNVC: 2
78018 50005: RNCC: 5 | RNVC: 9

1 May 1984

5340-12-353-1562
Mounting Bracket

123531562
5062230101: RNCC: 3 | RNVC: 2
506 223 01 01: RNCC: 5 | RNVC: 2

5 Feb 2001

5340-12-304-0463
Rim Lock

123040463
251829211A: RNCC: 3 | RNVC: 9

3 Jun 1985

5340-12-199-6256
Bridge Clamp

121996256
43707497-602: RNCC: 2 | RNVC: 2
43707497-602: RNCC: 3 | RNVC: 2

17 May 1984

5340-12-196-2126
Dust And Moisture Seal Protective Cap

121962126
8950718004: RNCC: 3 | RNVC: 2
0691012: RNCC: 5 | RNVC: 2
691012: RNCC: 5 | RNVC: 9

13 Jun 1983

5340-12-199-5305
Double Angle Bracket

121995305
8370160897: RNCC: 3 | RNVC: 2

9 May 1984

5340-12-309-4008
Door Button

123094008
2196131: RNCC: 3 | RNVC: 2

21 Jan 1987

5340-12-339-7685
Manual Control Lever

123397685
12676800369007: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-12-042-5152

5340-12-042-5572

5340-12-317-3242
Mending Plate

123173242
4900064-4124.019: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-198-4034
Access Cover

121984034
4000000-02212: RNCC: 3 | RNVC: 2

25 Jan 1984

5340-12-199-5339
Nonmetallic Bumper

121995339
2500057-507000.02: RNCC: 2 | RNVC: 2
2500057-507000.02: RNCC: 3 | RNVC: 2
2500057-507000.02: RNCC: 3 | RNVC: 2
2500057-507000.02: RNCC: 3 | RNVC: 2
2500057-507000.02: RNCC: 3 | RNVC: 2
PLATTE 142X100X3-CR75: RNCC: 5 | RNVC: 2
2500057-507000.02: RNCC: 5 | RNVC: 9
2500057-507000-02: RNCC: 5 | RNVC: 9

9 May 1984

5340-12-168-5553
Retaining Strap

121685553
53-1197-025-02: RNCC: 3 | RNVC: 2

22 Mar 1977

5340-12-376-0435
Mechanic Equipment Hardware Kit

123760435
81619416019: RNCC: 3 | RNVC: 2
81.61941-6019: RNCC: 5 | RNVC: 2
81.61941.6019: RNCC: 5 | RNVC: 2

6 Aug 2008

5340-12-326-6101
Dust And Moisture Seal Protective Plug

123266101
TL-2-209: RNCC: 3 | RNVC: 2
20059: RNCC: 5 | RNVC: 2
TL-2-209: RNCC: 5 | RNVC: 2
DOLN548-11: RNCC: 5 | RNVC: 2

14 Oct 1991

5340-12-189-2178
Dust And Moisture Seal Protective Cap

121892178
332104-0175.000: RNCC: 3 | RNVC: 9
332104-0175: RNCC: 5 | RNVC: 2
332104-0175.000: RNCC: 5 | RNVC: 9
1200032-200000.005: RNCC: 5 | RNVC: 9

14 Sep 1981

5340-12-128-8698
Rod End Clevis

121288698
31-3013-70-01: RNCC: 3 | RNVC: 2
31-3013-70-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-159-9067
Bow Handle

121599067
VG95149A90X25AL-FB: RNCC: 2 | RNVC: 2
C39281A1C159: RNCC: 3 | RNVC: 2
C39281-A1-C159: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-355-3669
Webbing Strap

123553669
1587218: RNCC: 3 | RNVC: 2
4.032.01-9002: RNCC: 5 | RNVC: 2
1587218: RNCC: 5 | RNVC: 2
4.032.01.9002: RNCC: 5 | RNVC: 2

7 Nov 2001

5340-12-315-2335
Loop Clamp

123152335
DIN3016-G1-101X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-101X20-W1-2: RNCC: 3 | RNVC: 2
SP101/20SZ-W1: RNCC: 3 | RNVC: 2
DIN3016-G1-101X20W1-2: RNCC: 5 | RNVC: 2
51.97445-0019: RNCC: 5 | RNVC: 2
DIN3016-G1-101X20W1-2: RNCC: 5 | RNVC: 2
01510000101: RNCC: 5 | RNVC: 2
1510000101: RNCC: 5 | RNVC: 2
SP101/20SZ: RNCC: 5 | RNVC: 2

5 Oct 1988

5340-12-092-0893

5340-12-351-7047
Helical Compression Spring Seat

123517047
5240530125: RNCC: 3 | RNVC: 2

16 Aug 2000

5340-12-190-4482
Rigid Caster

121904482
SK-EK-0252.050.02: RNCC: 3 | RNVC: 2
SKEK0252-050-02: RNCC: 5 | RNVC: 2

26 Nov 1981

5340-12-300-3642
Catch Strike

123003642
V96H01-1-1AJ: RNCC: 3 | RNVC: 2
96H01-1-1AI: RNCC: 5 | RNVC: 2
V96H01-1-1AI: RNCC: 5 | RNVC: 2
0745231218: RNCC: 5 | RNVC: 2
1516H01-1AC: RNCC: 5 | RNVC: 9

27 Jul 1984

5340-12-347-5773
Extension Drawer Slide

123475773
GC301-356: RNCC: 3 | RNVC: 2

11 Jan 1999

5340-12-377-4370
Retaining Strap

123774370
X599067-742185: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-12-154-1763
Retaining Clip

121541763
65-7058-750-07: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-383-7751
Angle Bracket

123837751
601241-203500.01: RNCC: 2 | RNVC: 2
601241-203500.01: RNCC: 3 | RNVC: 2

7 Dec 2010

5340-12-378-2555
Padlock

123782555
65/50: RNCC: 3 | RNVC: 2
4003318023446: RNCC: 5 | RNVC: 2
ABUS 65/50: RNCC: 5 | RNVC: 9

24 Mar 2009

5340-12-382-6697
Casement Fastener

123826697
3070-0701-00-20: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-12-301-7662
Metal Runner

123017662
537182-0213.000: RNCC: 3 | RNVC: 2
53 71 82-0213: RNCC: 5 | RNVC: 9
53 71 82-0213: RNCC: 5 | RNVC: 9
537182-0213: RNCC: 5 | RNVC: 9
537182-0213.000: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-12-700-8558
Loop Clamp

127008558
VG95211-ML-127008558: RNCC: 2 | RNVC: 2
155N1119-664: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-327-4200
Bow Handle

123274200
C44165-A41-C11: RNCC: 3 | RNVC: 2

21 Jan 1992

5340-12-174-3499
Nut And Bolt Locking Plate

121743499
7880061: RNCC: 3 | RNVC: 2
7880-061: RNCC: 5 | RNVC: 2
1000025-551120-06: RNCC: 5 | RNVC: 9
1000025-551120.06: RNCC: 5 | RNVC: 9

26 Jun 1978

5340-12-193-3085
Screw Hook

121933085
4618950179: RNCC: 3 | RNVC: 2
721 2 85 137 1: RNCC: 5 | RNVC: 9

12 Jul 1982

5340-12-191-5153
Nonmetallic Bumper

121915153
C22234-A1000-C17: RNCC: 3 | RNVC: 2
C22099-A688-C624: RNCC: 5 | RNVC: 2
C22099A688C624: RNCC: 5 | RNVC: 2
C22234A1000C17: RNCC: 5 | RNVC: 2

8 Feb 1982

5340-12-336-4726
Butt Hinge

123364726
01 2370 00 01: RNCC: 3 | RNVC: 2
0123700001: RNCC: 5 | RNVC: 2

15 Nov 1994

5340-12-346-6781
Mounting Bracket

123466781
3682182: RNCC: 3 | RNVC: 2
368.2182: RNCC: 5 | RNVC: 2

25 Aug 1998

5340-12-387-8641
Loop Clamp

123878641
7093530: RNCC: 3 | RNVC: 2

3 Feb 2012

Load More Results