What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 146 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 146 of 178

5340-12-300-7987
Angle Bracket

123007987
23114-5023.00: RNCC: 2 | RNVC: 2
SP11605: RNCC: 3 | RNVC: 2
23114-5023.00: RNCC: 3 | RNVC: 2
MZ4482: RNCC: 5 | RNVC: 9
23114-5023-00: RNCC: 5 | RNVC: 9
23114-5023.00: RNCC: 5 | RNVC: 9
23114-5023-00: RNCC: 5 | RNVC: 9
23114-5023.00: RNCC: 5 | RNVC: 9
69.2.323.9502: RNCC: 5 | RNVC: 9
MZ4482: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-319-3360
Loop Clamp

123193360
DIN3015-Z-A-2-R-16-16-PP-W1: RNCC: 2 | RNVC: 2
HRZ2A16-16PP STMBL: RNCC: 3 | RNVC: 2
RBPR1-216/16: RNCC: 3 | RNVC: 2
SP216/16PP-GD-AS: RNCC: 3 | RNVC: 2
0452835: RNCC: 5 | RNVC: 2
0745252000: RNCC: 5 | RNVC: 2
RBPR1-216/16: RNCC: 5 | RNVC: 2
DIN3015-ZA2R-16-16PP-W1: RNCC: 5 | RNVC: 2
SP216/16PP-GD-AS: RNCC: 5 | RNVC: 2
0452835: RNCC: 5 | RNVC: 2

25 Sep 1989

5340-12-197-7390
Angle Bracket

121977390
A-920265-005: RNCC: 3 | RNVC: 2
A920265-005: RNCC: 5 | RNVC: 2

18 Nov 1983

5340-12-149-9111
Resilient Mount

121499111
410-102-B-00.00: RNCC: 3 | RNVC: 2
410-102B0000: RNCC: 3 | RNVC: 2
845-410-102B00-00: RNCC: 5 | RNVC: 2
410-102-B-00.00: RNCC: 5 | RNVC: 2
410-102B00-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-323-5380
Mounting Bracket

123235380
870914700: RNCC: 3 | RNVC: 2
53.0217.10: RNCC: 5 | RNVC: 2

5 Dec 1990

5340-12-325-6561
Mounting Plate

123256561
3014200286: RNCC: 3 | RNVC: 2

26 Jun 1991

5340-12-356-1476
Retaining Strap

123561476
6020700195: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-370-6291
Angle Bracket

123706291
4068 210 006: RNCC: 3 | RNVC: 2

4 Dec 2006

5340-12-303-9804
Flush Lock

123039804
321837016: RNCC: 3 | RNVC: 9

28 May 1985

5340-12-353-9947
Loop Clamp

123539947
EN4114F32WH1: RNCC: 2 | RNVC: 2

28 May 2001

5340-12-354-1116
Mechanical Stop

123541116
000000-1002.741: RNCC: 3 | RNVC: 2
000000-1002.741: RNCC: 5 | RNVC: 2
000000-1002.741: RNCC: 5 | RNVC: 9

6 Jun 2001

5340-12-301-1964
Double Angle Bracket

123011964
1423-911.06(3): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-196-7564
Angle Bracket

121967564
999112: RNCC: 2 | RNVC: 2

11 Aug 1983

5340-12-700-1976
Nut And Bolt Locking Plate

127001976
51-260568094: RNCC: 2 | RNVC: 2
765-31-16: RNCC: 3 | RNVC: 2

5 Nov 1991

5340-12-378-7009
Access Cover

123787009
4100036-181942.000: RNCC: 2 | RNVC: 2
4100036-181942.000: RNCC: 3 | RNVC: 2

5 May 2009

5340-12-197-5138
Mending Plate

121975138
V22.918.370000-02: RNCC: 3 | RNVC: 2
V22-918-370000-02: RNCC: 5 | RNVC: 2

27 Oct 1983

5340-12-326-9108
Headless Straight Rod

123269108
279.823 054: RNCC: 3 | RNVC: 2
1392152-350000.008: RNCC: 5 | RNVC: 9
279.823 054: RNCC: 5 | RNVC: 9

7 Nov 1991

5340-12-175-6402
Webbing Strap

121756402
23111-4196.00: RNCC: 2 | RNVC: 2
2300012-4141.00: RNCC: 2 | RNVC: 2
23111-4196-00: RNCC: 3 | RNVC: 2
23111-4196.00: RNCC: 3 | RNVC: 2
23111-4196-00: RNCC: 5 | RNVC: 9
23111-4196-00: RNCC: 5 | RNVC: 9
23111-4196.00: RNCC: 5 | RNVC: 9
2300012-4141.00: RNCC: 5 | RNVC: 9
000-A3-25X2,5X350-BW-RAL6031: RNCC: 6 | RNVC: 9

10 Oct 1978

5340-12-354-0145
Verriegelun Buegel

123540145
AFG072210-01: RNCC: 3 | RNVC: 2

29 May 2001

5340-12-349-2841
Headless Straight Rod

123492841
J52423525-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-358-7876
Spring Tension Clip

123587876
0059887678: RNCC: 3 | RNVC: 2
53066: RNCC: 5 | RNVC: 2

14 Nov 2002

5340-12-348-8605
Angle Bracket

123488605
3464296040: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-12-311-8446
Angle Bracket

123118446
2300074-5522.00: RNCC: 2 | RNVC: 2
2300074-5522.00: RNCC: 3 | RNVC: 2
2300074-5522.00: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-358-7963
Mounting Bracket

123587963
1213 7571: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-366-3104
Angle Bracket

123663104
4483592: RNCC: 3 | RNVC: 2

7 Apr 2005

5340-12-389-1411
Expansion Shield

123891411
050255: RNCC: 3 | RNVC: 2
07402720: RNCC: 5 | RNVC: 2
050255: RNCC: 5 | RNVC: 2
2500600594: RNCC: 5 | RNVC: 2

30 May 2012

5340-12-324-6498
Mending Plate

123246498
100016751: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-12-361-5068
Lock-Release Lever

123615068
1000-17: RNCC: 3 | RNVC: 2

9 Oct 2003

5340-12-180-2604
Bow Handle

121802604
4118870027: RNCC: 3 | RNVC: 2

30 Aug 1979

5340-12-367-7612
Mounting Plate

123677612
5592370835: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-12-360-9337
Mounting Bracket

123609337
12850502: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-361-6762
Loop Clamp

123616762
054306635: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-339-5415
Angle Bracket

123395415
5901751641: RNCC: 3 | RNVC: 2
5901751641: RNCC: 5 | RNVC: 2
5901751641: RNCC: 5 | RNVC: 2

4 Dec 1995

5340-12-361-6808
Doorstop

123616808
PS4583000: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-393-6100
Helical Compression Spring Seat

123936100
T60214R070174: RNCC: 3 | RNVC: 2

26 Sep 2013

5340-12-161-6251
Clamping Catch

121616251
A1102E: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-377-8261
Spacing Threaded Standoff

123778261
5558958: RNCC: 3 | RNVC: 2

13 Feb 2009

5340-12-320-4409
Hand Crank

123204409
205 749 04: RNCC: 3 | RNVC: 2
328557: RNCC: 5 | RNVC: 2
205.749.04.00.00: RNCC: 5 | RNVC: 2
205.749.04.00: RNCC: 5 | RNVC: 2

15 Jan 1990

5340-12-349-8856
Mounting Bracket

123498856
54.2731.054.02: RNCC: 2 | RNVC: 2
54.2731.054.02: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-338-8053
Rod End Clevis

123388053
9870817: RNCC: 3 | RNVC: 9
463-611103.036: RNCC: 5 | RNVC: 9

25 Aug 1995

5340-12-318-2127
Metallic Solid Wheel

123182127
512214-8455.000: RNCC: 3 | RNVC: 2

21 Jun 1989

5340-12-341-9932
Spring Tension Clip

123419932
191857971: RNCC: 3 | RNVC: 9

27 Nov 1996

5340-12-317-3568
Mounting Plate

123173568
0414 3935: RNCC: 3 | RNVC: 2
4079300: RNCC: 5 | RNVC: 2
571269677: RNCC: 5 | RNVC: 2

31 Mar 1989

5340-12-363-1342
Access Cover

123631342
41201890: RNCC: 3 | RNVC: 2

6 May 2004

5340-12-372-5003
Mortise Lock Set

123725003
10020980: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-12-158-6937

5340-12-342-4780
Mounting Bracket

123424780
11221822100: RNCC: 3 | RNVC: 2
1122 182 2100: RNCC: 5 | RNVC: 2

17 Feb 1997

5340-12-377-5138
Handwheel

123775138
D4075834: RNCC: 3 | RNVC: 2

21 Jan 2009

5340-12-356-3695
Mounting Bracket

123563695
2339-060030A00C: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-337-6590
Bow Handle

123376590
633501: RNCC: 3 | RNVC: 2
K-633 501: RNCC: 5 | RNVC: 2
MSK 1398: RNCC: 5 | RNVC: 2
GTO NR. 633 501: RNCC: 5 | RNVC: 9

22 Mar 1995

5340-12-305-5504
Metal Runner

123055504
5801758-2900.05: RNCC: 2 | RNVC: 2
5801758-2900.05: RNCC: 3 | RNVC: 2
5801758-2900.05: RNCC: 5 | RNVC: 9

21 Nov 1985

5340-12-157-8677
Dust And Moisture Seal Protective Cap-Plug

121578677
VG95211-ML-121578677: RNCC: 2 | RNVC: 2
610U25: RNCC: 3 | RNVC: 2
025H200: RNCC: 3 | RNVC: 2
GPN610U25: RNCC: 5 | RNVC: 2
9560111180: RNCC: 5 | RNVC: 2
GPN610U25: RNCC: 5 | RNVC: 2
610002500: RNCC: 5 | RNVC: 9
GPN610,U25: RNCC: 5 | RNVC: 9
U25: RNCC: 5 | RNVC: 9
U25GPN610: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-332-1487
Mounting Plate

123321487
480-4124-05-00-15: RNCC: 3 | RNVC: 2
480/4124-05-00-15: RNCC: 5 | RNVC: 2

22 Jul 1993

5340-12-306-6584
Retaining Strap

123066584
23110-1900.17: RNCC: 2 | RNVC: 2
23110-1900-17: RNCC: 3 | RNVC: 2
23110-1900-17: RNCC: 5 | RNVC: 9
23110-1900-17: RNCC: 5 | RNVC: 9

19 Mar 1986

5340-12-325-4140
Dust And Moisture Seal Protective Cap

123254140
TL4-288: RNCC: 3 | RNVC: 2

5 Jun 1991

5340-12-700-3206
Nut And Bolt Locking Plate

127003206
51-262358074: RNCC: 2 | RNVC: 2
765-54-105SL: RNCC: 3 | RNVC: 2

12 Dec 1991

5340-12-336-5043
Double Angle Bracket

123365043
1361235-16038-00: RNCC: 3 | RNVC: 2

21 Nov 1994

5340-12-311-9331
Helical Compression Spring Seat

123119331
5D10070: RNCC: 3 | RNVC: 2
X11.11288-2003: RNCC: 5 | RNVC: 2

29 Oct 1987

5340-12-363-8665
Antipilferage Seal Locking Wire

123638665
1342 2232-123: RNCC: 3 | RNVC: 2
1342 2232-123: RNCC: 5 | RNVC: 2

30 Jul 2004

5340-12-319-2054
Mounting Plate

123192054
4900064-412114: RNCC: 3 | RNVC: 2

13 Sep 1989

5340-12-151-4821
Handle Grip

121514821
DIN39-E25-ST: RNCC: 2 | RNVC: 2
E25DIN39ST: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-386-8751
Nonmetallic Bumper

123868751
URLL-16: RNCC: 3 | RNVC: 2
7115666: RNCC: 5 | RNVC: 2
17393300EGS00: RNCC: 5 | RNVC: 9

11 Oct 2011

5340-12-175-5790
Strap End Clip

121755790
NO PRIMARY REF 12-175-5790: RNCC: 3 | RNVC: 2
02440-16: RNCC: 5 | RNVC: 9

3 Oct 1978

5340-12-174-2678
Mending Plate

121742678
7881632: RNCC: 3 | RNVC: 2
7881-632: RNCC: 5 | RNVC: 2
1000025-551200-02: RNCC: 5 | RNVC: 9
1000025-551200.02: RNCC: 5 | RNVC: 9

19 Jun 1978

5340-12-182-0961
Angle Bracket

121820961
622010119600: RNCC: 3 | RNVC: 2
62-2010-1196-00: RNCC: 5 | RNVC: 2

14 Jan 1980

5340-12-319-6906
Access Cover

123196906
731-C43-949: RNCC: 3 | RNVC: 2
731.43.148: RNCC: 3 | RNVC: 2
V731.43.148: RNCC: 5 | RNVC: 2

26 Oct 1989

5340-12-316-8282
Friction Catch

123168282
2300279-4690.00: RNCC: 2 | RNVC: 2
2300279-4690.00: RNCC: 3 | RNVC: 2
2300279-4690.00: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-330-0192
Loop Clamp

123300192
LN9491BK7: RNCC: 2 | RNVC: 2

22 Oct 1992

5340-12-356-5780
Access Cover

123565780
114306611: RNCC: 3 | RNVC: 2

13 Mar 2002

5340-12-320-0732
Compression Cup

123200732
54.0026.126.15: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-12-320-7132
Mounting Bracket

123207132
9000 2141: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-372-4100
Expansion Shield

123724100
60818: RNCC: 3 | RNVC: 2
EAM20: RNCC: 5 | RNVC: 2

16 Jul 2007

5340-12-349-6115
Plug Button

123496115
32 32 9 056 354: RNCC: 3 | RNVC: 2
32329056354: RNCC: 5 | RNVC: 2

8 Dec 1999

5340-12-327-0643
Mounting Plate

123270643
5803702-609100.00: RNCC: 2 | RNVC: 2
7802180735: RNCC: 3 | RNVC: 2
78021 80735: RNCC: 5 | RNVC: 9

27 Nov 1991

5340-12-322-3340
Loop Clamp

123223340
1124900341: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-316-7988
Access Cover

123167988
105-98380.12: RNCC: 3 | RNVC: 2

14 Feb 1989

5340-12-379-9873
Handle Grip

123799873
120D153550.000.0: RNCC: 2 | RNVC: 2
120D153550.000.0: RNCC: 3 | RNVC: 2

17 Sep 2009

5340-12-341-6521
Loop Clamp

123416521
03824200: RNCC: 3 | RNVC: 2
03824200.534: RNCC: 5 | RNVC: 2

10 Oct 1996

5340-12-373-3667
Dust And Moisture Seal Protective Cover

123733667
921769: RNCC: 3 | RNVC: 2

25 Oct 2007

5340-12-308-2900
Angle Bracket

123082900
5802017-472000.00: RNCC: 2 | RNVC: 2
5802017-472000.00: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-327-0642
Angle Bracket

123270642
5803702-106400.00: RNCC: 2 | RNVC: 2
7802180230: RNCC: 3 | RNVC: 2
78021 80230: RNCC: 5 | RNVC: 9

27 Nov 1991

5340-12-339-2279
Filler Opening Cap

123392279
2154851: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-12-313-3336
Mounting Bracket

123133336
5803616-3400: RNCC: 2 | RNVC: 2
7802060340: RNCC: 3 | RNVC: 2
78020 60340: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-374-6473
Double Angle Bracket

123746473
453 7016-001: RNCC: 3 | RNVC: 2
453 7016-001: RNCC: 5 | RNVC: 2

4 Mar 2008

5340-12-172-9410
Mending Plate

121729410
81411402120: RNCC: 3 | RNVC: 2
23245-150602.006.0: RNCC: 5 | RNVC: 9
23245-150602-006-0: RNCC: 5 | RNVC: 9

6 Mar 1978

5340-12-199-3791
Electrical-Mechanical Equipment Post

121993791
VG95148B6XM3X10-ST: RNCC: 2 | RNVC: 2
VG95148B6XM3X10-ST: RNCC: 3 | RNVC: 2
601-042: RNCC: 3 | RNVC: 2
0801-0100: RNCC: 3 | RNVC: 2
TD2040/05: RNCC: 5 | RNVC: 2

19 Apr 1984

5340-12-357-6191
Webbing Strap

123576191
23290-151039.001: RNCC: 2 | RNVC: 2
23290-151039.001: RNCC: 3 | RNVC: 2
23290-151039.001: RNCC: 5 | RNVC: 9

8 Jul 2002

5340-12-317-1658
Mounting Bracket

123171658
C320-A75-C9: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-12-304-5537
Electrical-Mechanical Equipment Post

123045537
2989120740: RNCC: 3 | RNVC: 2
VG95148C5XM2,5X20-ALMGSI1F28ALOD: RNCC: 3 | RNVC: 2

30 Jul 1985

5340-12-347-1002
Access Cover

123471002
8900011: RNCC: 3 | RNVC: 2
1.407.081: RNCC: 5 | RNVC: 2

27 Oct 1998

5340-12-386-6188
Mechanical Stop

123866188
2500262-324010.000.0: RNCC: 2 | RNVC: 2
2500262-324010.000.0: RNCC: 3 | RNVC: 2

16 Sep 2011

5340-12-346-1526
Access Cover

123461526
1000173-380050.001.0: RNCC: 2 | RNVC: 2
1000173-380050.001.0: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-12-361-7728
Mounting Bracket

123617728
2653-971520.000.0: RNCC: 2 | RNVC: 2
2653-971520.000.0: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-12-334-4195
Lock-Release Lever

123344195
1796735300: RNCC: 3 | RNVC: 2
17967353: RNCC: 5 | RNVC: 2

5 May 1994

5340-12-318-2593
Access Cover

123182593
81026010031: RNCC: 3 | RNVC: 2
81.02601.0031: RNCC: 5 | RNVC: 2

23 Jun 1989

5340-12-183-9041
Retaining Strap

121839041
2215209: RNCC: 3 | RNVC: 9
4032: RNCC: 5 | RNVC: 2

29 May 1980

5340-12-186-4969
Angle Bracket

121864969
8731592540: RNCC: 2 | RNVC: 2
8731592540: RNCC: 3 | RNVC: 2

9 Jan 1981

5340-12-301-9939
Mending Plate

123019939
3464320073: RNCC: 3 | RNVC: 2

24 Nov 1984

5340-12-357-0292
Nonmetallic Bumper

123570292
2300013-3398.03: RNCC: 2 | RNVC: 2
2300013-3398.03: RNCC: 3 | RNVC: 2

25 Apr 2002

5340-12-393-7733
Blank Panel

123937733
S252M3115210: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-12-386-3270
Rod End Connector

123863270
009-221.290-020: RNCC: 2 | RNVC: 2
009-221.290-020: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-353-7181
Angle Bracket

123537181
J92224239-001: RNCC: 3 | RNVC: 2

2 May 2001

5340-12-325-3284
Webbing Strap

123253284
60064-001: RNCC: 3 | RNVC: 2
60 064-001: RNCC: 5 | RNVC: 9

27 May 1991

5340-12-183-0435
Mounting Bracket

121830435
LM4901LIG22: RNCC: 3 | RNVC: 2
LM-4901: RNCC: 5 | RNVC: 9
LM4901: RNCC: 5 | RNVC: 9

13 Mar 1980

5340-12-361-7064
Butt Hinge

123617064
1056-U10: RNCC: 3 | RNVC: 2
704201208: RNCC: 5 | RNVC: 2

5 Nov 2003

5340-12-335-2516
Retaining Strap

123352516
2300002-185500.004: RNCC: 2 | RNVC: 2
9863308: RNCC: 3 | RNVC: 2
2300002-185500.004: RNCC: 5 | RNVC: 2
2300002-185500.004: RNCC: 5 | RNVC: 9
9863308: RNCC: 5 | RNVC: 9

1 Aug 1994

5340-12-302-7626
Manual Control Handle

123027626
3.602.9.365.004.5: RNCC: 3 | RNVC: 2
3-602-9-365-004-5: RNCC: 5 | RNVC: 9
3.602.9.365.004.5: RNCC: 5 | RNVC: 9

29 Jan 1985

5340-12-304-9627
Butt Hinge Leaf

123049627
P-296879-401: RNCC: 3 | RNVC: 2
P296879-401: RNCC: 5 | RNVC: 2

11 Sep 1985

5340-12-342-6960
Casement Fastener

123426960
U100-3113-201: RNCC: 3 | RNVC: 2
U100-3113-201/K: RNCC: 5 | RNVC: 2

18 Mar 1997

5340-12-338-6740
Mending Plate

123386740
DIN3015-L-DP-6-W1: RNCC: 2 | RNVC: 2
HRL6DP-ST-ZN: RNCC: 3 | RNVC: 2
DP-A6: RNCC: 3 | RNVC: 2
DP6: RNCC: 3 | RNVC: 2
DP-A6: RNCC: 5 | RNVC: 2

14 Aug 1995

5340-12-304-4788
Angle Bracket

123044788
23313-063110.000: RNCC: 2 | RNVC: 2
9851389: RNCC: 3 | RNVC: 2
9851389: RNCC: 5 | RNVC: 9
23313-063110.000: RNCC: 5 | RNVC: 9

23 Jul 1985

5340-12-701-3873
Mounting Plate

127013873
VG95211-ML-127013873: RNCC: 2 | RNVC: 2
5.12.5305.3641.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-303-9316
Mending Plate

123039316
200413: RNCC: 3 | RNVC: 2
24K03-0084-01-002: RNCC: 5 | RNVC: 2
200413: RNCC: 5 | RNVC: 2

21 May 1985

5340-12-389-1286
Access Hole Frame

123891286
9999261-185415.000.0: RNCC: 3 | RNVC: 2

30 May 2012

5340-12-308-4838
Mending Plate

123084838
2300223-201000.01.0: RNCC: 2 | RNVC: 2
2300223-201000.01.0: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-12-702-4233
Angle Bracket

127024233
VG95211-ML-127024233: RNCC: 2 | RNVC: 2
5.12.7206.1710.92: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-390-1380
Webbing Strap

123901380
2300559-189074.000.0: RNCC: 2 | RNVC: 2
2300559-189074.000.0: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-12-188-9159
Extension Drawer Slide Section

121889159
5801433-020000.03.0: RNCC: 3 | RNVC: 2
5801433-020000-03-0: RNCC: 5 | RNVC: 2
5801433-020000-03-0: RNCC: 5 | RNVC: 9
5801433-020000.03.0: RNCC: 5 | RNVC: 9

10 Aug 1981

5340-12-702-4022
Mounting Bracket

127024022
VG95211-ML-127024022: RNCC: 2 | RNVC: 2
5.12.5811.1930.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-197-0205
Resilient Mount

121970205
1204030001: RNCC: 3 | RNVC: 2
UMA,442/931,SONDERAUSF-M20,U28SO: RNCC: 5 | RNVC: 2
0021-3201-750: RNCC: 5 | RNVC: 2
U 28 SO: RNCC: 5 | RNVC: 9
U28SO: RNCC: 5 | RNVC: 9
UMA442/931SONDERAUSF-M20, U28SO: RNCC: 5 | RNVC: 9
UMA442/931SONDERAUSFUEHRUNG-M20: RNCC: 5 | RNVC: 9
0021-3201-750: RNCC: 5 | RNVC: 9

12 Sep 1983

5340-12-169-2082
Nonmetallic Bumper

121692082
98111201: RNCC: 3 | RNVC: 2
1928300156: RNCC: 5 | RNVC: 2
1928300156: RNCC: 5 | RNVC: 2
1928300156: RNCC: 5 | RNVC: 9

22 Apr 1977

5340-12-354-8326
Mounting Bracket

123548326
5400049-111829.00: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-179-1770
Loop Clamp

5340-12-315-9092
Access Cover

123159092
5803471-201820.00: RNCC: 2 | RNVC: 2
65.7789.453.00-A001: RNCC: 3 | RNVC: 2
5803471-201820.00: RNCC: 5 | RNVC: 2

7 Dec 1988

5340-12-309-1737
Mending Plate

123091737
2989051220: RNCC: 3 | RNVC: 2

19 Dec 1986

5340-12-195-5393
Resilient Mount

121955393
070199231A: RNCC: 3 | RNVC: 9

9 Mar 1983

5340-12-170-1308
Rod End Clevis

121701308
JJ45701: RNCC: 3 | RNVC: 2

29 Jun 1977

5340-12-194-2109
Butt Hinge

121942109
5548285: RNCC: 3 | RNVC: 2
554.8285: RNCC: 5 | RNVC: 2

12 Oct 1982

5340-12-318-5575
Angle Bracket

123185575
2300121-985000.001.0: RNCC: 2 | RNVC: 2
2300121-985000.001.0: RNCC: 3 | RNVC: 2

26 Jul 1989

5340-12-309-3119
Access Cover

123093119
4413041: RNCC: 3 | RNVC: 2
4.457221: RNCC: 5 | RNVC: 2

13 Jan 1987

5340-12-345-6245
Mounting Bracket

123456245
2300211-991410.000.0: RNCC: 2 | RNVC: 2
2300211-991410.000.0: RNCC: 3 | RNVC: 2

6 Apr 1998

5340-12-302-6795
Rigid Caster

123026795
YK03300991: RNCC: 3 | RNVC: 2
03300991: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 30 0991: RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-333-8937
Double Angle Bracket

123338937
53504: RNCC: 3 | RNVC: 2

22 Feb 1994

5340-12-183-5224
Electrical-Mechanical Equipment Post

121835224
C200ZZ30001-000: RNCC: 3 | RNVC: 2

24 Apr 1980

5340-12-305-0209
Expansion Plug

123050209
0116 6655: RNCC: 3 | RNVC: 2
01166655EF8928-59: RNCC: 5 | RNVC: 2

18 Sep 1985

5340-12-347-4883
Angle Bracket

123474883
9896129: RNCC: 3 | RNVC: 2
468-250500.001: RNCC: 5 | RNVC: 2
468-250500.001: RNCC: 5 | RNVC: 9
9896129: RNCC: 5 | RNVC: 9

16 Dec 1998

5340-12-195-4097
Bow Handle

121954097
5194-230MM: RNCC: 3 | RNVC: 2
5194 230: RNCC: 5 | RNVC: 2

21 Feb 1983

5340-12-379-3901
Access Cover

123793901
3131775: RNCC: 3 | RNVC: 2
5001874220: RNCC: 5 | RNVC: 2

20 Jul 2009

5340-12-322-2657
Mending Plate

123222657
400130241: RNCC: 2 | RNVC: 2
400130241: RNCC: 3 | RNVC: 2

7 Aug 1990

5340-12-326-0822
Access Cover

123260822
272.359.565: RNCC: 3 | RNVC: 2
272.359 565: RNCC: 5 | RNVC: 9

6 Aug 1991

5340-12-388-8275
Mortise Lock Set

123888275
115017: RNCC: 3 | RNVC: 2

26 Apr 2012

5340-12-382-1958
Rod End Clevis

123821958
195867: RNCC: 3 | RNVC: 2
A231009900011: RNCC: 5 | RNVC: 2

20 May 2010

5340-12-325-2543
Dust And Moisture Seal Protective Plug

123252543
331G-50-T1: RNCC: 3 | RNVC: 2

22 May 1991

5340-12-362-7341
Dust And Moisture Seal Protective Cap

123627341
250/51RAL3000: RNCC: 3 | RNVC: 2

24 Mar 2004

5340-12-337-7037
Door Button

123377037
DIN7463-A2-10 ROH: RNCC: 2 | RNVC: 2
A2-10DIN7463BK: RNCC: 5 | RNVC: 2
A2-10DIN7463ROH: RNCC: 5 | RNVC: 2
007463010004: RNCC: 5 | RNVC: 2
DIN7463-A2-10 BK: RNCC: 5 | RNVC: 2

30 Mar 1995

5340-12-322-9797
Helical Compression Spring Retainer

123229797
198 7101 00: RNCC: 3 | RNVC: 2
198710100: RNCC: 5 | RNVC: 2
PH80A-2A: RNCC: 5 | RNVC: 2

15 Oct 1990

5340-12-308-7716
Resilient Mount

123087716
81210-30X30-M8X9.NNT55: RNCC: 3 | RNVC: 2
0336 8224: RNCC: 3 | RNVC: 2
03368224: RNCC: 5 | RNVC: 2
03368224EC0153-21: RNCC: 5 | RNVC: 2

14 Nov 1986

5340-12-167-3799
Retaining Strap

121673799
1400003-11000-14: RNCC: 3 | RNVC: 2
1400003-11000-14: RNCC: 5 | RNVC: 9
1400003-11000.14: RNCC: 5 | RNVC: 9

16 Dec 1976

5340-12-316-0019
Mending Plate

123160019
C22107-A202-C103: RNCC: 3 | RNVC: 2

14 Dec 1988

5340-12-173-7052
Plug Button

121737052
L2-0905: RNCC: 3 | RNVC: 9

3 May 1978

5340-12-168-9239
Electrical-Mechanical Equipment Post

121689239
53-1184-006-05: RNCC: 3 | RNVC: 2

13 Apr 1977

5340-12-702-1640
Mounting Plate

127021640
VG95211-ML-127021640: RNCC: 2 | RNVC: 2
30.6602.20: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-167-5612
Clamping Catch

121675612
PAN5109-23: RNCC: 3 | RNVC: 2

3 Jan 1977

5340-12-146-2358
Loop Clamp

121462358
23114-5007.02: RNCC: 2 | RNVC: 2
23114-5007-02: RNCC: 3 | RNVC: 2
23114-5007-02: RNCC: 5 | RNVC: 9
23114-5007-02: RNCC: 5 | RNVC: 9
23114-5007-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-171-8826
Mending Plate

121718826
490127-32035-02: RNCC: 3 | RNVC: 2

23 Nov 1977

5340-12-338-8030
Mounting Bracket

123388030
6700017-203230.00: RNCC: 2 | RNVC: 2
6700017-203230.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-313-6271
Access Cover

123136271
510252-0580.000: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-12-199-5097
Double Angle Bracket

121995097
23111-3513.00: RNCC: 2 | RNVC: 2
23111-3513.00: RNCC: 5 | RNVC: 2
23111-3513-00: RNCC: 5 | RNVC: 9
23111-3513.00: RNCC: 5 | RNVC: 9
23111-3513-00: RNCC: 5 | RNVC: 9
23111-3513.00: RNCC: 5 | RNVC: 9

8 May 1984

5340-12-363-4478
Detent Plunger

123634478
9997010-014151.03: RNCC: 3 | RNVC: 2

17 Jun 2004

5340-12-329-6552
Nonmetallic Bumper

123296552
05323: RNCC: 3 | RNVC: 2
05323: RNCC: 5 | RNVC: 2

15 Sep 1992

5340-12-043-3291

5340-12-323-9069
Mending Plate

123239069
54.2544.550.02: RNCC: 2 | RNVC: 2
54.2544.550.02: RNCC: 3 | RNVC: 2

8 Jan 1991

5340-12-317-0528
Loop Clamp

123170528
3523020020: RNCC: 3 | RNVC: 2

7 Mar 1989

5340-12-370-3174
Compression Cup

123703174
126 1640: RNCC: 3 | RNVC: 2

25 Oct 2006

5340-12-393-3419
Rod End Clevis

123933419
8414756: RNCC: 3 | RNVC: 2

10 Sep 2013

5340-12-392-6605
Metal Runner

123926605
3557-40200: RNCC: 3 | RNVC: 2

26 Jun 2013

5340-12-347-5886
Mounting Bracket

123475886
2995.23.62: RNCC: 3 | RNVC: 2

12 Jan 1999

5340-12-358-7655
Mounting Bracket

123587655
9412601062: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-136-0650
Door Button

121360650
113837639A: RNCC: 3 | RNVC: 2
113837639: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-381-9906
Runner

123819906
000605-204520.01: RNCC: 2 | RNVC: 2
000605-204520.01: RNCC: 3 | RNVC: 2
39220: RNCC: 5 | RNVC: 2

26 Apr 2010

5340-12-178-6770
Retaining Strap

121786770
8701550037: RNCC: 3 | RNVC: 2

9 May 1979

5340-12-382-7015
Butt Hinge

123827015
1811460: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-12-180-7416
Door Button

121807416
313L: RNCC: 3 | RNVC: 2
0007673701: RNCC: 5 | RNVC: 2

1 Oct 1979

5340-12-182-0693
Angle Bracket

121820693
81974860487: RNCC: 3 | RNVC: 2

14 Jan 1980

5340-12-316-9082
Lock-Release Lever

123169082
571081300: RNCC: 3 | RNVC: 9

22 Feb 1989

5340-12-345-4379
Mounting Bracket

123454379
VG95211-ML-123454379: RNCC: 2 | RNVC: 2
54.0053.173.00: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-12-362-1373
Spacing Threaded Standoff

123621373
L50C27-40-3: RNCC: 3 | RNVC: 2

14 Jan 2004

5340-12-306-1124
Rigid Caster

123061124
K10-12R1-000-Z-M50-00: RNCC: 3 | RNVC: 2
310 122 916 000: RNCC: 5 | RNVC: 2

28 Jan 1986

5340-12-369-2878
Bow Handle

123692878
20860-257: RNCC: 3 | RNVC: 2
469-1206: RNCC: 5 | RNVC: 2

14 Jun 2006

5340-12-701-4816
Mounting Plate

127014816
VG95211-ML-127014816: RNCC: 2 | RNVC: 2
5.12.5811.2060.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-9351
Rod End Clevis

123599351
2500261-183480.004.0: RNCC: 2 | RNVC: 2
2500261-183480.004.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-197-6749
Mending Plate

121976749
P-296873-039: RNCC: 3 | RNVC: 2
P296873-039: RNCC: 5 | RNVC: 2

14 Nov 1983

5340-12-359-6754
Mounting Bracket

123596754
2500261-187980.001.0: RNCC: 2 | RNVC: 2
2500261-187980.001.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-321-6213
Clamping Catch

123216213
USM36-14: RNCC: 3 | RNVC: 2
6L.3741.018.00-337272: RNCC: 5 | RNVC: 2

7 Jun 1990

5340-12-355-0970
Flush Lock

123550970
3101-0004: RNCC: 3 | RNVC: 2

5 Oct 2001

5340-12-149-9505
Eye Hook

121499505
160-88437-05: RNCC: 3 | RNVC: 2
160-88437-05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-390-8900
Mounting Plate

123908900
5804015-203000.01: RNCC: 2 | RNVC: 2
5804015-203000.01: RNCC: 5 | RNVC: 2

4 Jan 2013

5340-12-199-1139
Mending Plate

121991139
AW7048.660.20-A001: RNCC: 3 | RNVC: 2
746670: RNCC: 5 | RNVC: 2

28 Mar 1984

5340-12-344-8633
Double Angle Bracket

123448633
5803514-207110.00: RNCC: 2 | RNVC: 2
55.0205.611.00: RNCC: 3 | RNVC: 2
5803514-207110.00: RNCC: 5 | RNVC: 9

22 Dec 1997

5340-12-196-6701
Resilient Mount

121966701
DIN95366-A1-NR55ST: RNCC: 2 | RNVC: 2
58540.NR55.ST: RNCC: 5 | RNVC: 2
58540BSTN5590: RNCC: 5 | RNVC: 2
58540SM550: RNCC: 5 | RNVC: 2
58540,NR55ST: RNCC: 5 | RNVC: 2
FORM58540: RNCC: 5 | RNVC: 2
VG95366-A1-NR55ST: RNCC: 5 | RNVC: 9
58540SM550: RNCC: 5 | RNVC: 9

1 Aug 1983

5340-12-153-7652
Nut And Bolt Locking Plate

121537652
TL5340-0018: RNCC: 2 | RNVC: 2
42-15-07-00-00: RNCC: 3 | RNVC: 2
42223-400-07: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-7108
Extension Drawer Slide

123197108
69000-123: RNCC: 3 | RNVC: 2

27 Oct 1989

5340-12-155-4780
Nut And Bolt Locking Plate

121554780
160-73011-27: RNCC: 3 | RNVC: 2
160-73011-27: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-349-2839
Butt Hinge Leaf

123492839
J52423523-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-331-6883
Mounting Bracket

123316883
480-7397-26-16-00: RNCC: 3 | RNVC: 2
480/7397-26-16-00: RNCC: 5 | RNVC: 2

8 Jun 1993

5340-12-382-7276
Mending Plate

123827276
110.04.022.011-00: RNCC: 3 | RNVC: 2

30 Jul 2010

5340-12-310-4606
Expansion Shield

123104606
7666: RNCC: 3 | RNVC: 2
EXPRESS-ANKER 10/15: RNCC: 3 | RNVC: 2
0117 4616: RNCC: 3 | RNVC: 2
HW20549-M10X90: RNCC: 3 | RNVC: 2
01174616ES8920-64: RNCC: 5 | RNVC: 2

22 May 1987

5340-12-391-9228
Retaining Strap

123919228
I011149: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-12-351-5092
Nonmetallic Bumper

123515092
0009878440: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-179-7235
Electrical-Mechanical Equipment Post

121797235
5946660: RNCC: 3 | RNVC: 2

23 Jul 1979

5340-12-318-0027
Retaining Strap

123180027
81437180013: RNCC: 3 | RNVC: 2
81.43718.0013: RNCC: 5 | RNVC: 2

2 Jun 1989

5340-12-322-2873
Mounting Plate

123222873
45.6830: RNCC: 3 | RNVC: 2
522511: RNCC: 3 | RNVC: 2

8 Aug 1990

5340-12-042-5772

5340-12-188-6793
Butt Hinge

121886793
A-245875-009: RNCC: 3 | RNVC: 2
A245875-009: RNCC: 5 | RNVC: 2

23 Jul 1981

5340-12-166-6550
Resilient Mount

121666550
845-4-0602-037.NR70.ST: RNCC: 3 | RNVC: 2
0602037: RNCC: 3 | RNVC: 2
0602-037: RNCC: 5 | RNVC: 2
8405883: RNCC: 5 | RNVC: 2

30 Sep 1976

5340-12-701-5290
Retaining Strap

127015290
VG95211-ML-127015290: RNCC: 2 | RNVC: 2
5.12.6105.0110.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-166-1033
Access Cover

121661033
100429-50000-17-0: RNCC: 2 | RNVC: 2
100429-50000-17-0: RNCC: 5 | RNVC: 2

31 Jul 1976

5340-12-317-9326
Angle Bracket

123179326
4/0930/7102/2: RNCC: 3 | RNVC: 2
4/0930/7102/0: RNCC: 5 | RNVC: 2

26 May 1989

5340-12-194-2216
Access Door

121942216
23182-7212: RNCC: 3 | RNVC: 2
23182-7212: RNCC: 5 | RNVC: 9

12 Oct 1982

5340-12-310-3083
Extension Drawer Slide

123103083
1201.15933: RNCC: 3 | RNVC: 2

8 May 1987

5340-12-333-5756
Resilient Mount

123335756
1145860022: RNCC: 3 | RNVC: 2
114 586 00 22: RNCC: 5 | RNVC: 2

6 Jan 1994

5340-12-383-8973
Dust And Moisture Seal Protective Cap

123838973
MNZ90711B: RNCC: 3 | RNVC: 2

17 Dec 2010

5340-12-342-5730
Magnetic Catch

123425730
246.92.000: RNCC: 3 | RNVC: 2
24692000: RNCC: 5 | RNVC: 2
0620080401: RNCC: 5 | RNVC: 2

28 Feb 1997

5340-12-365-5818
Double Angle Bracket

123655818
J28130053-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-194-1069
Permanent Magnet

121941069
12728-1110: RNCC: 2 | RNVC: 2
12728-1110: RNCC: 3 | RNVC: 2
12728-1110: RNCC: 5 | RNVC: 9

4 Oct 1982

5340-12-311-2387
Angle Bracket

123112387
23114-0454: RNCC: 2 | RNVC: 2
23114-0454: RNCC: 5 | RNVC: 2
23114-0454: RNCC: 5 | RNVC: 9

7 Aug 1987

5340-12-305-0221
Mending Plate

123050221
442-0023: RNCC: 3 | RNVC: 2

18 Sep 1985

5340-12-354-9547
Loop Clamp

123549547
2300002-091000.001: RNCC: 3 | RNVC: 2

10 Sep 2001

5340-12-165-6859
Double Angle Bracket

121656859
233-641: RNCC: 3 | RNVC: 2
233.641: RNCC: 5 | RNVC: 2
1002-1500-0104: RNCC: 5 | RNVC: 2
0008350122: RNCC: 5 | RNVC: 2

22 Jun 1976

5340-12-354-1337
Mending Plate

123541337
J94535027-401: RNCC: 3 | RNVC: 2

8 Jun 2001

5340-12-300-3836
Sealing Plug Assembly

123003836
E3-2005150: RNCC: 3 | RNVC: 2
E3-2005150: RNCC: 5 | RNVC: 9
E3-2005150: RNCC: 5 | RNVC: 9

28 Jul 1984

5340-12-193-0700
Slide Keeper

121930700
01341-NIRO: RNCC: 3 | RNVC: 2
01341NIRO: RNCC: 5 | RNVC: 2
71097-NIRO: RNCC: 5 | RNVC: 2

21 Jun 1982

5340-12-342-3498
Loop Clamp

123423498
SK165-186210.009.0: RNCC: 3 | RNVC: 2
1807301: RNCC: 5 | RNVC: 2

27 Jan 1997

5340-12-702-4664
Lock-Release Lever

127024664
VG95211-ML-127024664: RNCC: 2 | RNVC: 2
5.51.0603.1390.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6504
Angle Bracket

127016504
VG95211-ML-127016504: RNCC: 2 | RNVC: 2
5.12.7205.8050.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-161-1798
Loop Clamp

121611798
G12TAN15802-0A: RNCC: 3 | RNVC: 2
G12ATAN15802-3-1364-5: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-345-5884
Mounting Bracket

123455884
2500255-200000.004.0: RNCC: 2 | RNVC: 2
2500255-200000.004.0: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-366-7624
Mounting Bracket

123667624
580-122935.000: RNCC: 2 | RNVC: 2
580-122935.000: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-12-390-7854
Corrosion Preventive Anode

123907854
1-4031-199-00: RNCC: 3 | RNVC: 2

12 Dec 2012

5340-12-195-8026
Strap Bolt

121958026
2500067-103100.01: RNCC: 2 | RNVC: 2
2500067-103100.01: RNCC: 3 | RNVC: 2
2500067-103100-01: RNCC: 5 | RNVC: 2
2500067-103100-01: RNCC: 5 | RNVC: 9

19 Apr 1983

5340-12-135-2008
Webbing Strap

121352008
5800166-12: RNCC: 2 | RNVC: 2
5800166-12: RNCC: 5 | RNVC: 9
000-A1-20X2,0X650-PE-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-155-1181
Spring Tension Clip

121551181
160-24764-05: RNCC: 3 | RNVC: 2
160-24764-05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-3611
Mounting Bracket

123563611
E4-2040411: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-172-8872
Door Handle

121728872
1054-06-008: RNCC: 3 | RNVC: 2

2 Mar 1978

5340-12-321-0847
Mounting Plate

123210847
5802102-201112.00: RNCC: 2 | RNVC: 2
5802102-201112.00: RNCC: 5 | RNVC: 9

26 Mar 1990

5340-12-702-6375
Angle Bracket

127026375
VG95211-ML-127026375: RNCC: 2 | RNVC: 2
84.5312-4010: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-352-8291
Latch Bar

123528291
5400049-128300.03: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-12-343-1511
Access Door

123431511
5080-245: RNCC: 3 | RNVC: 2

9 May 1997

5340-12-339-4108
Retaining Strap

123394108
4931-0002-300000: RNCC: 3 | RNVC: 2

21 Nov 1995

5340-12-326-6270
Retaining Strap

123266270
153-500-04: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-12-321-1220
Strap Hinge Leaf

123211220
9000 2095: RNCC: 3 | RNVC: 2

29 Mar 1990

5340-12-380-8363
Spacing Threaded Standoff

123808363
0005332841: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-310-2119
Nonmetallic Bumper

123102119
1068891: RNCC: 2 | RNVC: 2
1068891: RNCC: 3 | RNVC: 2

21 Apr 1987

5340-12-027-8728

5340-12-349-3678
Eye Hook

123493678
103355: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-12-337-7689
Multiple Angle Bracket

123377689
460 689 14 14: RNCC: 3 | RNVC: 2
4606891414: RNCC: 5 | RNVC: 2

10 Apr 1995

5340-12-347-9737
Mending Plate

123479737
1087265: RNCC: 3 | RNVC: 2

18 Mar 1999

5340-12-131-5603

5340-12-393-8518
Access Cover

123938518
1103349: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-12-164-8131
Butt Hinge

121648131
160-73419: RNCC: 3 | RNVC: 2
160-73419: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-343-6113
Mounting Plate

123436113
4900390-4100-001: RNCC: 2 | RNVC: 2

8 Jul 1997

5340-12-306-9090
Rod End Clevis

123069090
3900061-6300.00: RNCC: 2 | RNVC: 2
500785: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-12-315-5304
Access Cover

123155304
5803471-201340.01: RNCC: 2 | RNVC: 2
65.7789.430.01-A001: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-12-327-3482
Nonmetallic Bumper

123273482
DIN95364-A100X40-NR55ST: RNCC: 2 | RNVC: 2
530068-M16X45.NR55.ST: RNCC: 5 | RNVC: 2
781113: RNCC: 5 | RNVC: 2
781113MITTEL: RNCC: 5 | RNVC: 2
0843261: RNCC: 5 | RNVC: 2
VG95364-A100X40-NR55ST: RNCC: 5 | RNVC: 9

14 Jan 1992

5340-12-150-1919
Loop Clamp

121501919
0116 6480: RNCC: 3 | RNVC: 2
1166480EF8932-60: RNCC: 5 | RNVC: 2
H3260-A10-10X9/16: RNCC: 5 | RNVC: 2
ZWSP10X9H735: RNCC: 5 | RNVC: 2
1230000010: RNCC: 5 | RNVC: 2
ZWSP10-10-9ZY: RNCC: 5 | RNVC: 2
ZWSP10-10/9ZY: RNCC: 5 | RNVC: 2
1166480: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-336-1140
Retaining Bail

123361140
C26111-B19-C99: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-12-159-0326
Angle Bracket

121590326
8381594140: RNCC: 3 | RNVC: 2
600460: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-311-3601
Spring Tension Clip

123113601
N900956.01: RNCC: 3 | RNVC: 2
7CC 500PHOSPHATIERT: RNCC: 3 | RNVC: 2
N900956.01: RNCC: 5 | RNVC: 2

21 Aug 1987

5340-12-378-4422
Positioning Thrust Stop

123784422
65000339: RNCC: 3 | RNVC: 2

7 Apr 2009

5340-12-352-6770
Mounting Bracket

123526770
5400049-721080.00: RNCC: 2 | RNVC: 2
5400049-721080.00: RNCC: 3 | RNVC: 2

6 Dec 2000

5340-12-333-3395
Access Cover

123333395
40 0131 286: RNCC: 3 | RNVC: 2
400131286: RNCC: 5 | RNVC: 2
40 0131 286: RNCC: 5 | RNVC: 9

25 Nov 1993

5340-12-366-0169
Mounting Bracket

123660169
36136123: RNCC: 3 | RNVC: 2

28 Feb 2005

5340-12-136-3208
Plain Solid Disk

121363208
114F35005: RNCC: 3 | RNVC: 2
8391810152: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-334-3365
Mounting Bracket

123343365
4900123-1020.01: RNCC: 2 | RNVC: 2
4900123-1020.01: RNCC: 3 | RNVC: 2

28 Apr 1994

5340-12-316-6622
Retaining Strap

123166622
51974010484: RNCC: 3 | RNVC: 2
51974010484: RNCC: 3 | RNVC: 2
51.97401-0484: RNCC: 5 | RNVC: 2
51.97401-0484: RNCC: 5 | RNVC: 2

31 Jan 1989

5340-12-188-6299
Handwheel

121886299
63X7VG85080RG5: RNCC: 2 | RNVC: 2
63X7-4-1132GCUSN5ZNPB: RNCC: 3 | RNVC: 9
63X7VG85080GCUSN5ZNPB: RNCC: 5 | RNVC: 2

21 Jul 1981

5340-12-177-2310
Electrical-Mechanical Equipment Post

121772310
VG95148B10XM5X22.9-AL: RNCC: 2 | RNVC: 2
VG95148B10XM5X22.9-AL: RNCC: 3 | RNVC: 2
5800822-01-017: RNCC: 3 | RNVC: 2
5800822-01.017: RNCC: 5 | RNVC: 2

22 Jan 1979

5340-12-348-9273
Spacing Threaded Standoff

123489273
245/7346-49-00-35: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-12-140-1549
Spring Tension Clip

121401549
87547: RNCC: 3 | RNVC: 2
5604BB130-41: RNCC: 5 | RNVC: 2
5800364-10210-05: RNCC: 5 | RNVC: 9
5800364-10210.05: RNCC: 5 | RNVC: 9
5604BB130-41: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-6317
Webbing Strap

123286317
2653-971071.00: RNCC: 2 | RNVC: 2
2653-971071.00: RNCC: 3 | RNVC: 2
000-B2-25X2,5X340-PE-RAL6031: RNCC: 6 | RNVC: 9

11 Jun 1992

5340-12-312-5913
Electrical-Mechanical Equipment Post

123125913
615.06-04-00-00-013: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-700-2759
Mending Plate

127002759
51-270442014: RNCC: 2 | RNVC: 2
765-65-SB281: RNCC: 3 | RNVC: 2

26 Nov 1991

5340-12-700-6266
Flush Lock

127006266
VG95211-ML-127006266: RNCC: 2 | RNVC: 2
5.12.4805.0410.92: RNCC: 3 | RNVC: 2
0501400531109: RNCC: 5 | RNVC: 2

30 Sep 1992

5340-12-368-4740
Multiple Angle Bracket

123684740
J29120244-405: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-12-318-9140
Metal Runner

123189140
47.4.821.0043: RNCC: 3 | RNVC: 2

24 Aug 1989

5340-12-197-9374
Metal Runner

121979374
CF 339 001 C: RNCC: 2 | RNVC: 2
CF 339 001 C: RNCC: 3 | RNVC: 2
CF 339 001 A: RNCC: 5 | RNVC: 2
CF 339 001 B: RNCC: 5 | RNVC: 2
CF 339 001 C: RNCC: 5 | RNVC: 2
CF 339 001 B: RNCC: 5 | RNVC: 2
CF 339 001 A: RNCC: 5 | RNVC: 2

2 Dec 1983

5340-12-356-6179
Access Cover

123566179
0400 1482: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-360-0983
Mounting Bracket

123600983
9424201786: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-349-3870
Access Cover

123493870
592601-9009.000: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-12-301-2401
Mending Plate

123012401
4179204: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-374-6135
Locking Stay

123746135
4.055-035.0: RNCC: 3 | RNVC: 2

29 Feb 2008

5340-12-319-7879
Lock-Release Lever

123197879
2653-073381.04: RNCC: 2 | RNVC: 2
2653-073381.04: RNCC: 3 | RNVC: 2

6 Nov 1989

5340-12-700-9056
Mounting Bracket

127009056
VG95211-ML-127009056: RNCC: 2 | RNVC: 2
2.11.7602.0011.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-307-0411
Double Angle Bracket

123070411
P-246091-042: RNCC: 3 | RNVC: 2
P246091-042: RNCC: 5 | RNVC: 2

30 Apr 1986

5340-12-356-1239
Lock-Release Lever

123561239
2339-010480A00C: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-701-7346
Retaining Strap

127017346
VG95211-ML-127017346: RNCC: 2 | RNVC: 2
5.12.7608.8003.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-341-2863
Metallic Bumper

123412863
2500262-198800.000.0: RNCC: 2 | RNVC: 2
2500262-198800.000.0: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-12-702-3804
Mounting Plate

127023804
VG95211-ML-127023804: RNCC: 2 | RNVC: 2
5.12.5101.6154.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-5207
Mounting Bracket

127025207
VG95211-ML-127025207: RNCC: 2 | RNVC: 2
5.51.7004.0080: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-193-9531
Resilient Mount

121939531
VR 2094-2-145: RNCC: 3 | RNVC: 9
0019876040: RNCC: 5 | RNVC: 2
721 1 69 016 2: RNCC: 5 | RNVC: 9
121939531: RNCC: 6 | RNVC: 9

20 Sep 1982

5340-12-365-3497
Double Angle Bracket

123653497
2300109-063113.000.0: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-12-300-5294
Strap End Clip

123005294
NO PRIMARY REF 12-300-5294: RNCC: 3 | RNVC: 2
VG4862-26: RNCC: 5 | RNVC: 9
26VG4862: RNCC: 5 | RNVC: 9

10 Aug 1984

5340-12-350-9491
Manual Control Lever

123509491
TYP64-AZ/P2-150-300/015: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-12-314-8297
Angle Bracket

123148297
53.1717.812.00: RNCC: 3 | RNVC: 2

13 Aug 1988

5340-12-360-3020
Mounting Bracket

123603020
1864411502: RNCC: 3 | RNVC: 2
1864411502: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-324-5656
Handwheel

123245656
40 0168 220: RNCC: 2 | RNVC: 2
40 0168 220: RNCC: 3 | RNVC: 2
40 0168 220: RNCC: 5 | RNVC: 9

28 Feb 1991

5340-12-322-3337
Retaining Strap

123223337
6160780085: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-303-9473
Butt Hinge

123039473
3228800328: RNCC: 3 | RNVC: 2

23 May 1985

5340-12-361-4932
Mounting Bracket

123614932
1504293: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-324-4724
Mending Plate

123244724
52.2030.100.01: RNCC: 2 | RNVC: 2
52.2030.100.01: RNCC: 3 | RNVC: 2

20 Feb 1991

5340-12-342-1167
Access Cover

123421167
57.090.5003: RNCC: 3 | RNVC: 2
570905003: RNCC: 5 | RNVC: 2

13 Dec 1996

5340-12-379-9490
Mounting Bracket

123799490
1558322: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-385-5071
Angle Bracket

123855071
5841503073: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-12-355-4248
Mounting Plate

123554248
4635456340: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-12-323-1667
Angle Bracket

123231667
2012710140: RNCC: 3 | RNVC: 2

30 Oct 1990

5340-12-327-3263
Dust And Moisture Seal Boot

123273263
3818240049: RNCC: 3 | RNVC: 2

13 Jan 1992

5340-12-180-2124
Mounting Plate

121802124
03425367: RNCC: 3 | RNVC: 2
3425367EF5006-59: RNCC: 5 | RNVC: 2

30 Aug 1979

5340-12-319-4817
Electrical-Mechanical Equipment Post

123194817
1025737T14: RNCC: 3 | RNVC: 2

5 Oct 1989

5340-12-317-8384
Dust And Moisture Seal Protective Plug

123178384
3927501: RNCC: 3 | RNVC: 2

18 May 1989

5340-12-309-3070
Angle Bracket

123093070
8390780084: RNCC: 3 | RNVC: 2

13 Jan 1987

5340-12-324-7549
Mounting Plate

123247549
6600133-221130.04: RNCC: 2 | RNVC: 2
6600133-221130.04: RNCC: 3 | RNVC: 2

21 Mar 1991

5340-12-151-0714
Mending Plate

121510714
5800359-020191-01: RNCC: 3 | RNVC: 2
5800359-020191-01: RNCC: 5 | RNVC: 9
5800359-020191.01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-361-7732
Mounting Bracket

123617732
2653-971531.000.0: RNCC: 2 | RNVC: 2
2653-971531.000.0: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-12-180-3578
Webbing Strap

121803578
02605521: RNCC: 3 | RNVC: 2
2605521KZ5505-46: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-12-360-1536
Angle Bracket

123601536
9425061640: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-392-3984
Mounting Bracket

123923984
353078.0000: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-12-134-5136

5340-12-373-1293
Dust And Moisture Seal Protective Plug

123731293
93192920: RNCC: 3 | RNVC: 2

1 Oct 2007

5340-12-384-9041
Mounting Bracket

123849041
F1.1189-30-30-20.60-00: RNCC: 3 | RNVC: 2

8 Apr 2011

5340-12-384-5830
Loop Clamp

123845830
BRSGU97/25N16016: RNCC: 3 | RNVC: 2
000000002011: RNCC: 5 | RNVC: 2

10 Mar 2011

5340-12-170-0355
Door Handle

121700355
4152534: RNCC: 3 | RNVC: 2
166-2269: RNCC: 5 | RNVC: 2
2638-231: RNCC: 5 | RNVC: 2
4152-534: RNCC: 5 | RNVC: 2
166-2269: RNCC: 5 | RNVC: 9
E166-2269: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-12-337-1755
Loop Clamp

123371755
11.49065-0412: RNCC: 3 | RNVC: 2
11.49065-0412: RNCC: 5 | RNVC: 2
11490650412: RNCC: 5 | RNVC: 2
200.052: RNCC: 5 | RNVC: 2
F11.49065-0412: RNCC: 5 | RNVC: 2

27 Jan 1995

5340-12-186-1461
Electrical-Mechanical Equipment Post

121861461
512206-3829.000: RNCC: 3 | RNVC: 2
512206-3829: RNCC: 5 | RNVC: 2
512206-3829-000: RNCC: 5 | RNVC: 2

2 Dec 1980

5340-12-353-9383
Angle Bracket

123539383
6600211-622420.00: RNCC: 2 | RNVC: 2
6600211-622420.00: RNCC: 3 | RNVC: 2

21 May 2001

5340-12-196-4430
Butt Hinge

121964430
25.5012.075-00: RNCC: 3 | RNVC: 2

7 Jul 1983

5340-12-196-4590
Lock-Release Lever

121964590
0110401003: RNCC: 3 | RNVC: 2
150.549: RNCC: 5 | RNVC: 2
01104.10-RAL7000: RNCC: 5 | RNVC: 2
000000-0150.549: RNCC: 5 | RNVC: 2

11 Jul 1983

5340-12-177-8514
Retaining Strap

121778514
700503-0551.000: RNCC: 3 | RNVC: 2
700503-0551: RNCC: 5 | RNVC: 2
1200054-00001-46: RNCC: 5 | RNVC: 9
1200054-00001.46: RNCC: 5 | RNVC: 9

5 Mar 1979

5340-12-370-2350
Dust And Moisture Seal Protective Cap-Plug

123702350
E32341-00: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-12-352-2603
Metal Grille

123522603
6700017-205420.01: RNCC: 2 | RNVC: 2
6700017-205420.01: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-12-328-9484
Escutcheon Plate

123289484
42311828: RNCC: 3 | RNVC: 2
42311828EZ55-0724: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-12-366-2359
Mounting Plate

123662359
5803924-300850.01: RNCC: 2 | RNVC: 2
7802982386: RNCC: 3 | RNVC: 2
5803924-300850.01: RNCC: 5 | RNVC: 2

24 Mar 2005

5340-12-701-6387
Mounting Plate

127016387
VG95211-ML-127016387: RNCC: 2 | RNVC: 2
5.12.7070.1570.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-188-3270
Butt Hinge

121883270
DIN7956-32X0,8-30-MS-NRST-BK-702: RNCC: 2 | RNVC: 2
32X0-8X702: RNCC: 3 | RNVC: 2
32X0-8X702: RNCC: 5 | RNVC: 2
A32DIN7956MS-ST-702: RNCC: 5 | RNVC: 2
DIN7956-32X0,8-30-MS-ST-BK-702: RNCC: 5 | RNVC: 2
DIN7956-32X0,8-MS-ST-BK-702: RNCC: 5 | RNVC: 2

30 Jun 1981

5340-12-316-7373
Handle Grip

123167373
KL154: RNCC: 3 | RNVC: 2

8 Feb 1989

5340-12-197-2066
Angle Bracket

121972066
4355420440: RNCC: 3 | RNVC: 2

29 Sep 1983

5340-12-331-5393
Metal Grille

123315393
1120-63122: RNCC: 2 | RNVC: 2
1120-63122: RNCC: 3 | RNVC: 2

17 May 1993

5340-12-320-0061
Loop Clamp

123200061
7C27-14BA: RNCC: 3 | RNVC: 2

27 Nov 1989

5340-12-322-2326
Access Cover

123222326
C117-A44-B7: RNCC: 2 | RNVC: 2
C117-A44-B7: RNCC: 3 | RNVC: 2

3 Aug 1990

5340-12-348-6614
Rigid Caster

123486614
BK-STARU-S200RO: RNCC: 3 | RNVC: 2

2 Aug 1999

5340-12-371-3080
Mounting Bracket

123713080
8390-0014: RNCC: 2 | RNVC: 2
8390-0014: RNCC: 3 | RNVC: 2

13 Mar 2007

5340-12-358-2400
Mounting Bracket

123582400
J92224246-403: RNCC: 3 | RNVC: 2

1 Oct 2002

5340-12-313-0889
Mounting Bracket

123130889
2500212-17.00: RNCC: 2 | RNVC: 2
2500212-17.00: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-12-324-2782
Nonmetallic Bumper

123242782
191253147A: RNCC: 3 | RNVC: 9

1 Feb 1991

5340-12-323-4416
Nonmetallic Bumper

123234416
251411041B: RNCC: 3 | RNVC: 2

26 Nov 1990

5340-12-346-7514
Nonmetallic Bumper

123467514
2039.0325: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-133-4042

5340-12-188-5133
Rod End Clevis

121885133
2300109-186212.001.0: RNCC: 3 | RNVC: 2
2300109-186212.001.0: RNCC: 3 | RNVC: 2
2300109-186212-001-0: RNCC: 5 | RNVC: 2
2300109-186212-001-0: RNCC: 5 | RNVC: 2
2300109-186212-001-0: RNCC: 5 | RNVC: 9
2300109-186212.001.0: RNCC: 5 | RNVC: 9

15 Jul 1981

5340-12-166-9326
Catch Strike

121669326
1918-741001-022: RNCC: 2 | RNVC: 2
1918-741001-022: RNCC: 5 | RNVC: 2
1918-741001.022: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-12-358-1100
Butt Hinge Leaf

123581100
2800-193110.006.0: RNCC: 2 | RNVC: 2
2800-193110.006.0: RNCC: 3 | RNVC: 2

16 Sep 2002

5340-12-178-8119
Mounting Bracket

121788119
5561534/4: RNCC: 3 | RNVC: 2
5561534-4: RNCC: 5 | RNVC: 2

18 May 1979

5340-12-316-9180
Resilient Mount

123169180
155015-6,6-CR.ST-40: RNCC: 3 | RNVC: 2
5205H: RNCC: 3 | RNVC: 2
5205 H: RNCC: 5 | RNVC: 2
60-52-05-H: RNCC: 5 | RNVC: 2
VG95406-M4-3-CR-ST: RNCC: 5 | RNVC: 9
5205 H: RNCC: 5 | RNVC: 9
5205H: RNCC: 5 | RNVC: 9

23 Feb 1989

5340-12-345-9913
Angle Bracket

123459913
1206 8540: RNCC: 3 | RNVC: 2
12068540ED0111-90: RNCC: 5 | RNVC: 2
3.602.9.637.078.4: RNCC: 5 | RNVC: 9

27 May 1998

5340-12-366-1089
Flush Bolt

123661089
2500267-197310.000.0: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-701-4415
Mounting Bracket

127014415
VG95211-ML-127014415: RNCC: 2 | RNVC: 2
5.12.5313.8110.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-354-4112
Nonmetallic Bumper

123544112
J53230643-001: RNCC: 3 | RNVC: 2

10 Jul 2001

5340-12-359-7214
Loop Clamp

123597214
NO PRIMARY REF 12-359-7214: RNCC: 3 | RNVC: 2
1414538040: RNCC: 5 | RNVC: 2

5 Mar 2003

5340-12-312-6989
Access Cover

123126989
6100108-1920.00: RNCC: 2 | RNVC: 2
2W112A010-0000.02: RNCC: 3 | RNVC: 2

28 Jan 1988

5340-12-317-3468
Angle Bracket

123173468
4900064-4123.002: RNCC: 3 | RNVC: 2

30 Mar 1989

5340-12-365-6347
Mounting Plate

123656347
J92228211-001: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-179-3049
Resilient Mount

121793049
DIN95363-A50X30-M10X15-NR70ST: RNCC: 2 | RNVC: 2
500042-M10X15.NR70.ST: RNCC: 5 | RNVC: 2
81962100144: RNCC: 5 | RNVC: 2
VG95363-A50X30-M10X15-NR70ST: RNCC: 5 | RNVC: 9

20 Jun 1979

5340-12-327-4643
Spring Tension Clip

123274643
15-31-05: RNCC: 3 | RNVC: 2
5004-059: RNCC: 5 | RNVC: 2
5080-292: RNCC: 5 | RNVC: 2
K30369-98: RNCC: 5 | RNVC: 2
K303698: RNCC: 5 | RNVC: 2
P30369-98K: RNCC: 5 | RNVC: 2
W3: RNCC: 5 | RNVC: 9
H10017 TYP 3W: RNCC: 5 | RNVC: 9
F300 0T 022 4095: RNCC: 6 | RNVC: 9
F300 0T 022 4836: RNCC: 6 | RNVC: 9

23 Jan 1992

5340-12-702-6453
Loop Clamp

127026453
VG95211-ML-127026453: RNCC: 2 | RNVC: 2
987S50-65-15KD: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-323-0216
Mounting Bracket

123230216
70.1101.505-13: RNCC: 2 | RNVC: 2
70.1101.505-13: RNCC: 3 | RNVC: 2
70.1101.505-13: RNCC: 5 | RNVC: 2

17 Oct 1990

5340-12-326-7783
Nonmetallic Bumper

123267783
PLATTE 200X10X1 MM.NR70: RNCC: 3 | RNVC: 2
NR70-200X10X1MM: RNCC: 3 | RNVC: 2

24 Oct 1991

5340-12-394-0253
Nut And Bolt Locking Plate

123940253
310349: RNCC: 3 | RNVC: 2
5184-02-00-09#35: RNCC: 5 | RNVC: 2

30 Oct 2013

5340-12-172-4746
Plain Solid Disk

121724746
N13-00013: RNCC: 3 | RNVC: 2

23 Jan 1978

5340-12-302-5041
Headless Straight Rod

123025041
STAHLWELLE 20H7X300: RNCC: 3 | RNVC: 2
ARBRE20X300: RNCC: 5 | RNVC: 2

9 Jan 1985

5340-12-331-0751
Loop Clamp

123310751
DIN3016-1-A1-7X9-W5: RNCC: 2 | RNVC: 2
DIN3016-A1-7X9-W5: RNCC: 3 | RNVC: 2
RS1.7/9-W5: RNCC: 3 | RNVC: 2
5L.3821.005.12: RNCC: 5 | RNVC: 2
DIN3016-A1-7X9-W5: RNCC: 5 | RNVC: 9

19 Mar 1993

5340-12-320-5680
Instrument Mounting Clamp

123205680
PAN4258C38: RNCC: 3 | RNVC: 2

26 Jan 1990

5340-12-375-7692
Mounting Bracket

123757692
4004479: RNCC: 3 | RNVC: 2
4004479: RNCC: 5 | RNVC: 2

3 Jul 2008

5340-12-175-5784
Double Angle Bracket

121755784
WW 415 732 A: RNCC: 2 | RNVC: 2
WW 415 732 A: RNCC: 3 | RNVC: 9
WW415732A: RNCC: 5 | RNVC: 2
WW 415 732 A: RNCC: 5 | RNVC: 2
WW415732A: RNCC: 5 | RNVC: 9

3 Oct 1978

5340-12-345-5971
Mounting Bracket

123455971
2094-424011.000.0: RNCC: 2 | RNVC: 2
2094-424011.000.0: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-384-2345
Dust And Moisture Seal Protective Cap

123842345
WM 22585: RNCC: 3 | RNVC: 2

4 Feb 2011

5340-12-041-2538

5340-12-320-2202
Mending Plate

123202202
NO PRIMARY REF 12-320-2202: RNCC: 3 | RNVC: 2
5802102-201420.02: RNCC: 5 | RNVC: 9
5802102-201420.02: RNCC: 5 | RNVC: 9

19 Dec 1989

5340-12-123-1403
Nut And Bolt Locking Plate

121231403
5165-01-31-02: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-702-2192
Mounting Bracket

127022192
VG95211-ML-127022192: RNCC: 2 | RNVC: 2
30.7225.75: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-303-8619
Angle Bracket

123038619
4219110212: RNCC: 3 | RNVC: 2

9 May 1985

5340-12-317-2190
Angle Bracket

123172190
CF 454 391 A: RNCC: 2 | RNVC: 2
CF 454 391 A: RNCC: 3 | RNVC: 2
CF 454 391 A: RNCC: 5 | RNVC: 2

17 Mar 1989

5340-12-348-7152
Loop Clamp

123487152
1.12/15 W5: RNCC: 3 | RNVC: 2

10 Aug 1999

5340-12-358-7380
Runner

123587380
2481-391840.003.0: RNCC: 2 | RNVC: 2
2481-391840.003.0: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-390-0304
Angle Bracket

123900304
313623: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-353-0948
Mounting Plate

123530948
AFG0702090: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-12-391-4071
Rod End Clevis

123914071
M5537092020400: RNCC: 3 | RNVC: 2

11 Mar 2013

5340-12-362-3680
Multiple Angle Bracket

123623680
JN0148-03C04: RNCC: 3 | RNVC: 2

12 Feb 2004

5340-12-362-3106
Mounting Bracket

123623106
70670-002: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-12-317-3245
Mounting Bracket

123173245
4900064-4124.018: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-365-5807
Double Angle Bracket

123655807
J27420057-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-300-2168
Angle Bracket

123002168
23114-2806.71: RNCC: 2 | RNVC: 2
23114-2806.71: RNCC: 3 | RNVC: 2
23114-2806-71: RNCC: 5 | RNVC: 9
23114-2806.71: RNCC: 5 | RNVC: 9
23114-2806-71: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-702-1671
Mounting Bracket

127021671
VG95211-ML-127021671: RNCC: 2 | RNVC: 2
30.7100.2143: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-386-4318
Loop Clamp

123864318
DIN3016-1-A2-8-8X15-W1-2: RNCC: 2 | RNVC: 2

1 Sep 2011

5340-12-702-9221
Threaded End Tensioning Tie Rod

127029221
VG95211-ML-127029221: RNCC: 2 | RNVC: 2
5.12.6602.8041.98: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-393-2407
Bow Handle

123932407
GN528-PA-117-8,5-SW: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-12-332-4115
Angle Bracket

123324115
0851 7753.097: RNCC: 3 | RNVC: 2
0851 7564.108: RNCC: 5 | RNVC: 2
8517564FA T.108: RNCC: 5 | RNVC: 9
8517753FA T.97: RNCC: 5 | RNVC: 9

9 Aug 1993

5340-12-390-2654
Mounting Bracket

123902654
2300545-251010.002.0: RNCC: 2 | RNVC: 2
2300545-251010.002.0: RNCC: 3 | RNVC: 2

23 Oct 2012

5340-12-333-3538
Retaining Strap

123333538
7055.3.01: RNCC: 3 | RNVC: 2

6 Dec 1993

5340-12-346-1479
Dust And Moisture Seal Protective Plug

123461479
420.2.7: RNCC: 3 | RNVC: 2

18 Jun 1998

5340-12-701-2669
Mounting Bracket

127012669
VG95211-ML-127012669: RNCC: 2 | RNVC: 2
5.12.4805.0063.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-2125
Angle Bracket

123612125
J92220321-003: RNCC: 3 | RNVC: 2

4 Sep 2003

5340-12-321-1781
Spring Loaded Cylinder Fastener

123211781
2500067-101120.00: RNCC: 2 | RNVC: 2
2500067-101120.00: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-12-702-1709
Mounting Plate

127021709
VG95211-ML-127021709: RNCC: 2 | RNVC: 2
30.7117.112: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-368-8566
Spring Loaded Cylinder Fastener

123688566
33082-005-020: RNCC: 3 | RNVC: 2

2 May 2006

5340-12-366-5385
Dust And Moisture Seal Boot

123665385
GSC-15-82562-00: RNCC: 3 | RNVC: 2

4 May 2005

5340-12-316-5199
Angle Bracket

123165199
4900278-103130.00: RNCC: 2 | RNVC: 2
4900278-103130.00: RNCC: 3 | RNVC: 2

23 Jan 1989

5340-12-365-5817
Double Angle Bracket

123655817
J28130049-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-329-0112
Protection Bellows

123290112
81.96420-0324: RNCC: 3 | RNVC: 2
81964200324: RNCC: 5 | RNVC: 2

8 Jul 1992

5340-12-328-9271
Loop Clamp

123289271
2300354-889900-002: RNCC: 2 | RNVC: 2
70700-400026-99: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-359-8473
Dust And Moisture Seal Protective Cap

123598473
250/12RAL3000: RNCC: 3 | RNVC: 2
250/12ROT: RNCC: 5 | RNVC: 2
GPN250-12RAL3000: RNCC: 5 | RNVC: 2

13 Mar 2003

5340-12-199-1411
Gummi- Riemen

121991411
NO PRIMARY REF 12-199-1411: RNCC: 3 | RNVC: 2
01-09-76-48-500-211-000-06: RNCC: 5 | RNVC: 9
01-09-76-48.500-211.000.06: RNCC: 5 | RNVC: 9

29 Mar 1984

5340-12-342-1955
Mounting Plate

123421955
81974852851: RNCC: 3 | RNVC: 2
81.97485-2851: RNCC: 5 | RNVC: 2
81.97485.2851: RNCC: 5 | RNVC: 2

30 Dec 1996

5340-12-335-3878
Runner

123353878
347-150-030: RNCC: 2 | RNVC: 2
347-150-030: RNCC: 3 | RNVC: 2

16 Aug 1994

5340-12-178-8037
Retaining Strap

121788037
5801113-111-009: RNCC: 3 | RNVC: 2
5801113-111.009: RNCC: 5 | RNVC: 2

18 May 1979

5340-12-333-3902
Access Cover

123333902
9108510238: RNCC: 3 | RNVC: 2
467-421/0851-16-00-00: RNCC: 5 | RNVC: 2

10 Dec 1993

5340-12-179-1412
Nonmetallic Bumper

121791412
837-0009871642.PUR90: RNCC: 3 | RNVC: 2
600375: RNCC: 3 | RNVC: 2
0009871642: RNCC: 5 | RNVC: 2

8 Jun 1979

5340-12-197-8027
Nonmetallic Bumper

121978027
81874800191: RNCC: 3 | RNVC: 2
81-97480-0191: RNCC: 5 | RNVC: 2
81.97480.0191: RNCC: 5 | RNVC: 2

23 Nov 1983

5340-12-702-5341
Mounting Plate

127025341
VG95211-ML-127025341: RNCC: 2 | RNVC: 2
5.51.7204.0151.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-386-1446
Bumper

123861446
2500262-198100.003.0: RNCC: 2 | RNVC: 2
2500262-198100.003.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-344-3736
Mounting Bracket

123443736
A-296771-007: RNCC: 3 | RNVC: 2
A296771-007: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-329-6346
Angle Bracket

123296346
1361235-16020-00: RNCC: 3 | RNVC: 2

11 Sep 1992

5340-12-352-0645
Bow Handle

123520645
050-01468D: RNCC: 3 | RNVC: 2

12 Oct 2000

5340-12-316-3769
Mounting Bracket

123163769
068130174: RNCC: 3 | RNVC: 2

13 Jan 1989

5340-12-381-7639
Mounting Bracket

123817639
43.02.82: RNCC: 3 | RNVC: 2

29 Mar 2010

5340-12-388-5412
Expansion Shield

123885412
50558: RNCC: 3 | RNVC: 2
SLM24: RNCC: 5 | RNVC: 2

29 Mar 2012

5340-12-379-6713
Loop Clamp

123796713
DIN3016-1-D1-48X25-W1-2-CR: RNCC: 2 | RNVC: 2

20 Aug 2009

5340-12-363-3631
Dust And Moisture Seal Protective Cap

123633631
028-700040-02-0: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-12-314-1006
Mending Plate

123141006
4252620140: RNCC: 3 | RNVC: 2
425 262 01 40: RNCC: 5 | RNVC: 2
A4252620140: RNCC: 5 | RNVC: 2

7 Jun 1988

5340-12-308-1886
Dust And Moisture Seal Protective Plug

123081886
700/3/4"-16UNF: RNCC: 3 | RNVC: 2
700319200: RNCC: 5 | RNVC: 9
GPN700,3/4IN-16UNF F.A.: RNCC: 5 | RNVC: 9
GPN700,3/4IN-16UNF FORM A: RNCC: 5 | RNVC: 9

11 Sep 1986

5340-12-306-0809
Mending Plate

123060809
P-243852-014: RNCC: 3 | RNVC: 2
P243852-014: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-702-9379
Dust And Moisture Seal Protective Cap

127029379
VG95211-ML-127029379: RNCC: 2 | RNVC: 2
5660A-M36-1,5-1: RNCC: 3 | RNVC: 2
0500840349090: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-335-9764
Double Angle Bracket

123359764
ESW 100.16 NACH ESW ST 500.00.4: RNCC: 3 | RNVC: 2
ESW100-16: RNCC: 5 | RNVC: 9

7 Oct 1994

5340-12-145-1938
Gurtgewebe- Riemen

5340-12-145-9642
Gurtgewebe- Riemen

5340-12-122-0198
Spann- Verschlusz

5340-12-122-3155
Anschlag Scharnier

5340-12-334-8599
Multiple Angle Bracket

123348599
160-61272: RNCC: 3 | RNVC: 2
160-61272: RNCC: 5 | RNVC: 9

28 Jun 1994

5340-12-304-4829
Angle Bracket

123044829
2300106-260300.08: RNCC: 2 | RNVC: 2
2300106-260300.08: RNCC: 3 | RNVC: 2
2300106-260300.08: RNCC: 5 | RNVC: 9
2300106-260300.08: RNCC: 5 | RNVC: 9

23 Jul 1985

5340-12-192-2607
Butt Hinge Leaf

121922607
4067230551: RNCC: 3 | RNVC: 2

5 Apr 1982

5340-12-356-7488
Rod End Clevis

123567488
T622M1401052: RNCC: 3 | RNVC: 2
1040639: RNCC: 5 | RNVC: 2

3 Apr 2002

5340-12-334-7113
Mounting Plate

123347113
4605250039: RNCC: 3 | RNVC: 2
7013-98: RNCC: 5 | RNVC: 2
460 525 00 39: RNCC: 5 | RNVC: 2
ZR05250039: RNCC: 5 | RNVC: 2
721 1 131 258: RNCC: 5 | RNVC: 9

10 Jun 1994

5340-12-702-1356
Mounting Bracket

127021356
VG95211-ML-127021356: RNCC: 2 | RNVC: 2
30.5850.130.01: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-300-4884
Case Corner

123004884
5801357-5140.02F: RNCC: 2 | RNVC: 2
5801357-5140.02F: RNCC: 3 | RNVC: 2
5801357-5140.02F: RNCC: 5 | RNVC: 9

7 Aug 1984

5340-12-322-4413
Nonmetallic Bumper

123224413
8100397-200-10: RNCC: 2 | RNVC: 2
8100397-200-10: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-12-358-4336
Mending Plate

123584336
58R059-84611-10: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-181-7322
Detent Plunger

121817322
02-701: RNCC: 3 | RNVC: 2
H25-1Z15: RNCC: 5 | RNVC: 2

12 Dec 1979

5340-12-312-5910
Electrical-Mechanical Equipment Post

123125910
615.06-04-00-00-016: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-390-0662
Angle Bracket

123900662
9999261-391200.015.0: RNCC: 3 | RNVC: 2

28 Sep 2012

5340-12-308-2928
Pad Eye

123082928
P-875154-001: RNCC: 3 | RNVC: 2
P875154-001: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-339-3930
Angle Bracket

123393930
2819-352650.003.0: RNCC: 2 | RNVC: 2
2819-352650.003.0: RNCC: 3 | RNVC: 2

20 Nov 1995

5340-12-197-0218
Dust And Moisture Seal Protective Plug

121970218
7446.0: RNCC: 3 | RNVC: 2
86204: RNCC: 5 | RNVC: 2

12 Sep 1983

5340-12-193-3120
Pad Eye

121933120
4608330214: RNCC: 3 | RNVC: 2
721 2 88 120 1: RNCC: 5 | RNVC: 9

12 Jul 1982

5340-12-321-3790
Loop Clamp

123213790
1212 6628: RNCC: 3 | RNVC: 2
31.1776-03.4: RNCC: 5 | RNVC: 2

11 May 1990

5340-12-701-5566
Mounting Bracket

127015566
VG95211-ML-127015566: RNCC: 2 | RNVC: 2
5.12.6113.1820.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-356-5154
Dust And Moisture Seal Protective Cap

123565154
SW13-1-G8/H0, SCHWARZ: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-360-8938
Bail Handle

123608938
3486.1001: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-347-3506
Mounting Bracket

123473506
4965.06.05: RNCC: 2 | RNVC: 2
4965.06.05: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-12-302-5170
Ball Socket Seat

123025170
4039910222: RNCC: 3 | RNVC: 2

9 Jan 1985

5340-12-354-8305
Multiple Angle Bracket

123548305
5400049-621042.00: RNCC: 2 | RNVC: 2
5400049-621042.00: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-380-5085
Handwheel

123805085
M132: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-12-319-7243
Dust And Moisture Seal Protective Cap

123197243
9710020414: RNCC: 3 | RNVC: 2

27 Oct 1989

5340-12-155-2538
Butt Hinge Leaf

121552538
160-25541-28: RNCC: 3 | RNVC: 2
160-25541-28: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-307-5092
Clamping Catch

123075092
6020295: RNCC: 3 | RNVC: 2
AEGN451010: RNCC: 5 | RNVC: 2
N451010: RNCC: 5 | RNVC: 2

25 Jun 1986

5340-12-366-6268
Rod End Clevis

123666268
BD5.100.134.531: RNCC: 3 | RNVC: 2

17 May 2005

5340-12-381-5558
Swivel Caster

123815558
LEXR-POEV125KD-SG-FI: RNCC: 3 | RNVC: 2

3 Mar 2010

5340-12-318-4789
Mounting Bracket

123184789
1000192-05 0 00300: RNCC: 2 | RNVC: 2
1000192-05 0 00300: RNCC: 3 | RNVC: 2
1000192-05 0 00300: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-12-340-7819
Angle Bracket

123407819
5801984-100100.000.0: RNCC: 2 | RNVC: 2
5801984-100100.000.0: RNCC: 3 | RNVC: 2

12 Jun 1996

5340-12-306-6618
Mending Plate

123066618
704-152530-000-8: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-12-702-5018
Rod End Connector

127025018
VG95211-ML-127025018: RNCC: 2 | RNVC: 2
5.51.6110.0041.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-390-4519
Mounting Bracket

123904519
2300559-185200.005.0: RNCC: 2 | RNVC: 2
2300559-185200.005.0: RNCC: 3 | RNVC: 2

14 Nov 2012

5340-12-192-2281
Loop Clamp

121922281
LB106PP: RNCC: 3 | RNVC: 2
N13923: RNCC: 5 | RNVC: 2
LB6PP: RNCC: 5 | RNVC: 2
0900236: RNCC: 5 | RNVC: 2
LB106PP: RNCC: 5 | RNVC: 2
0900236: RNCC: 5 | RNVC: 2
N13923: RNCC: 5 | RNVC: 9
LB1 6PP: RNCC: 5 | RNVC: 9
PPN-LB6: RNCC: 5 | RNVC: 9

1 Apr 1982

5340-12-702-6893
Pawl Fastener

127026893
VG95211-ML-127026893: RNCC: 2 | RNVC: 2
5.51.6501.1851.98: RNCC: 3 | RNVC: 2

25 Apr 1995

5340-12-319-3621
Dust And Moisture Seal Protective Plug

123193621
PL-AK11599PE302: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-12-142-9381
Spring Tension Clip

121429381
A10-23-328-05-0: RNCC: 3 | RNVC: 2
A10-23-328-05-0: RNCC: 5 | RNVC: 2
A10-23-328-05-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-370-8226
Loop Clamp

123708226
06154095131: RNCC: 3 | RNVC: 2
06.67419-0006: RNCC: 5 | RNVC: 2
06.67419.0006: RNCC: 5 | RNVC: 2
06674190006: RNCC: 5 | RNVC: 2
0 615 4095 131: RNCC: 5 | RNVC: 2

8 Jan 2007

5340-12-176-4061
Retaining Strap

121764061
PAN4286-63: RNCC: 3 | RNVC: 2

27 Nov 1978

5340-12-390-8568
Mounting Plate

123908568
93-91-06931: RNCC: 3 | RNVC: 2
80088619: RNCC: 5 | RNVC: 2

20 Dec 2012

5340-12-340-6042
Escutcheon Plate

123406042
154 787-00000: RNCC: 3 | RNVC: 2

10 May 1996

5340-12-369-2608
Dust And Moisture Seal Protective Cap

123692608
D0066004-002: RNCC: 3 | RNVC: 2
D0066004-001: RNCC: 5 | RNVC: 2

12 Jun 2006

5340-12-325-8850
Webbing Strap

123258850
79014/042-2500-0500: RNCC: 3 | RNVC: 2
79014/042-2500-0500: RNCC: 5 | RNVC: 9

18 Jul 1991

5340-12-151-0648
Electronic Equipment Hardware Kit

121510648
5800359-090010: RNCC: 3 | RNVC: 2
ST5800359-090010: RNCC: 5 | RNVC: 2
5800359-090010: RNCC: 5 | RNVC: 9
ST5800359-090010: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-337-0613
Mounting Plate

123370613
F11.02124-0003: RNCC: 3 | RNVC: 2
11.02124-0003: RNCC: 5 | RNVC: 2

17 Jan 1995

5340-12-363-1151
Mending Plate

123631151
5242-021070A05B: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-323-5075
Mending Plate

123235075
1161722: RNCC: 3 | RNVC: 2
4003.065.68.00.011: RNCC: 5 | RNVC: 2
1161722: RNCC: 5 | RNVC: 2
4003.65.68/11: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-199-4753
Webbing Strap

121994753
2500138-190.200: RNCC: 2 | RNVC: 2
2500138-190.200: RNCC: 3 | RNVC: 2
2500138-190200: RNCC: 5 | RNVC: 9

28 Apr 1984

5340-12-313-0156
Double Angle Bracket

123130156
P-086147-018: RNCC: 3 | RNVC: 2
P086147-018: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-187-5163
Retaining Strap

121875163
2300109-060000.020.0: RNCC: 2 | RNVC: 2
2300109-060000.020.0: RNCC: 3 | RNVC: 2
2300109-060000.020.0: RNCC: 3 | RNVC: 2
2300109-060000-020-0: RNCC: 5 | RNVC: 9
2300109-060000.020.0: RNCC: 5 | RNVC: 9
2300109-060000-020-0: RNCC: 5 | RNVC: 9
2300109-060000-020-0: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-303-9356
Double Angle Bracket

123039356
A-296811-004: RNCC: 3 | RNVC: 2
A296811-004: RNCC: 5 | RNVC: 2

22 May 1985

5340-12-135-6806
Butt Hinge

121356806
DIN7956-40X0,8-30-MS-ST-BK: RNCC: 2 | RNVC: 2
A40DIN7956MS: RNCC: 5 | RNVC: 2
DIN7956-40X0,8-30-MS-BK: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-330-7508
Hand Crank

123307508
BH AA 012: RNCC: 3 | RNVC: 2

3 Feb 1993

5340-12-385-5529
Mounting Bracket

123855529
5240900241: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-12-346-1695
Angle Bracket

123461695
4209618088: RNCC: 3 | RNVC: 2

22 Jun 1998

5340-12-385-3522
Mounting Bracket

123853522
5841502973: RNCC: 3 | RNVC: 2

25 May 2011

5340-12-337-9645
Access Door

123379645
4932201: RNCC: 3 | RNVC: 2
EZ49322: RNCC: 5 | RNVC: 2

5 May 1995

5340-12-348-0955
Retaining Band

123480955
6738600052: RNCC: 3 | RNVC: 2

13 Apr 1999

5340-12-190-7382
Retaining Band

121907382
02467087: RNCC: 3 | RNVC: 2
2467087: RNCC: 5 | RNVC: 2
2467087ED5042-72: RNCC: 5 | RNVC: 2

10 Dec 1981

5340-12-025-8279

5340-12-042-5713

Load More Results