What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 144 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 144 of 178

5340-12-041-9783

5340-12-183-1036
Double Angle Bracket

121831036
42024138EE5052-81: RNCC: 3 | RNVC: 2
42024138: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-125-2360

5340-12-366-3989
Zug Ersatzteilsatz

123663989
10.02 70 43: RNCC: 3 | RNVC: 2

20 Apr 2005

5340-12-191-1140
Rigid Caster

121911140
T4-4815-3: RNCC: 3 | RNVC: 2

13 Jan 1982

5340-12-194-2602
Manual Control Handle

121942602
66.3505.225.01-A001: RNCC: 3 | RNVC: 2
66.3505.225.01A001: RNCC: 5 | RNVC: 2
582623: RNCC: 5 | RNVC: 2

18 Oct 1982

5340-12-368-8197
Mending Plate

123688197
1030010-180774.000.0: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-12-350-2208
Mounting Bracket

123502208
V6545-01005-102: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-12-702-1464
Mounting Bracket

127021464
VG95211-ML-127021464: RNCC: 2 | RNVC: 2
30.6110.130: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-5317
Angle Bracket

127025317
VG95211-ML-127025317: RNCC: 2 | RNVC: 2
5.51.7040.0120.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-175-1853
Double Angle Bracket

121751853
03341556: RNCC: 3 | RNVC: 2
3341556EF5091-29: RNCC: 5 | RNVC: 2

30 Aug 1978

5340-12-354-8337
Spacing Threaded Standoff

123548337
5400049-111230.01: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-171-7477
Catch Strike

121717477
490126-30015-02: RNCC: 3 | RNVC: 2
895431: RNCC: 5 | RNVC: 2

10 Nov 1977

5340-12-316-1818
Double Angle Bracket

123161818
7400001-201400.01: RNCC: 2 | RNVC: 2
7400001-201400.01: RNCC: 3 | RNVC: 2
7400001-201400.01: RNCC: 5 | RNVC: 9

29 Dec 1988

5340-12-155-0814
Loop Clamp

121550814
1929-16100: RNCC: 2 | RNVC: 2
1929-16100: RNCC: 3 | RNVC: 2
1929-16100: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-7727
Catch Strike

121987727
009-083.110-001: RNCC: 2 | RNVC: 2
009-083.110-001: RNCC: 3 | RNVC: 2

24 Feb 1984

5340-12-325-6825
Mounting Bracket

123256825
092-262020-000-0: RNCC: 2 | RNVC: 2
092-262020-000-0: RNCC: 3 | RNVC: 2

28 Jun 1991

5340-12-369-5607
Retaining Strap

123695607
NO PRIMARY REF 12-369-5607: RNCC: 3 | RNVC: 2
7083387: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-12-701-7640
Angle Bracket

127017640
VG95211-ML-127017640: RNCC: 2 | RNVC: 2
5.12.7701.8040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-344-4481
Mounting Bracket

123444481
P-296880-063: RNCC: 3 | RNVC: 2
P296880-063: RNCC: 5 | RNVC: 2

28 Oct 1997

5340-12-372-9653
Clamping Catch

123729653
6004-U20-PC: RNCC: 3 | RNVC: 2

12 Sep 2007

5340-12-195-1966
Dust And Moisture Seal Protective Plug

121951966
HK070CK11-111: RNCC: 3 | RNVC: 2
HK070CK11-111: RNCC: 5 | RNVC: 2

25 Jan 1983

5340-12-369-6794
Angle Bracket

123696794
S59902-04-6-229: RNCC: 3 | RNVC: 2

8 Aug 2006

5340-12-185-9351
Mounting Plate

121859351
4900059-751290.004.0: RNCC: 3 | RNVC: 2
1227737: RNCC: 5 | RNVC: 2
4900059-751290-004-0: RNCC: 5 | RNVC: 2
4900059-751290-004-0: RNCC: 5 | RNVC: 9
4900059-751290.004.0: RNCC: 5 | RNVC: 9
751290-004-0: RNCC: 5 | RNVC: 9

11 Nov 1980

5340-12-176-6131
Electronic Equipment Hardware Kit

121766131
5801479-3250: RNCC: 2 | RNVC: 2
5801479-3250: RNCC: 3 | RNVC: 2
5801479-3250: RNCC: 3 | RNVC: 2
5801479-3250: RNCC: 5 | RNVC: 9
5801479-3250: RNCC: 5 | RNVC: 9

11 Dec 1978

5340-12-187-4718
Angle Bracket

121874718
5801557-2411.00: RNCC: 2 | RNVC: 2
5801557-2411.00: RNCC: 3 | RNVC: 2
5801557-2411: RNCC: 5 | RNVC: 2
5801557-2411: RNCC: 5 | RNVC: 9
5801557-2411.00: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-346-7490
Runner

123467490
5802006-201540.00: RNCC: 2 | RNVC: 2
5802006-201540.00: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-355-9496
Double Angle Bracket

123559496
J92220454-401: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-199-6594
Mending Plate

121996594
606.15-08-00-00-007: RNCC: 3 | RNVC: 2

19 May 1984

5340-12-311-2482
Electrical-Mechanical Equipment Post

123112482
VG95148A4XM2,5X20-2.0402.26: RNCC: 2 | RNVC: 2
VG95148A4XM2,5X20-2.0402.26: RNCC: 3 | RNVC: 2
48100-003: RNCC: 3 | RNVC: 2
48 100-003: RNCC: 5 | RNVC: 9

10 Aug 1987

5340-12-316-6889
Metallic Solid Wheel

123166889
202974-4625: RNCC: 3 | RNVC: 2

2 Feb 1989

5340-12-393-3037
Webbing Strap

123933037
8605001322300: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-374-2915
Access Cover

123742915
5324731: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-318-6564
Retaining Strap

123186564
2200198: RNCC: 3 | RNVC: 9

3 Aug 1989

5340-12-135-6739

5340-12-194-8285
Rod End Clevis

121948285
SK17201-040000.008.0: RNCC: 3 | RNVC: 2
SK17201-040000.008.0: RNCC: 5 | RNVC: 9
17201-040000.008.0: RNCC: 5 | RNVC: 9

14 Dec 1982

5340-12-387-3999
Dust And Moisture Seal Protective Plug

123873999
10113-012120.003.0: RNCC: 2 | RNVC: 2
10113-012120.003.0: RNCC: 3 | RNVC: 2

9 Dec 2011

5340-12-311-4466
Electrical-Mechanical Equipment Post

123114466
VG95148B6XM3X15-2.0380.30-NI: RNCC: 2 | RNVC: 2
VG95148B6XM3X15-2.0380.30-NI: RNCC: 3 | RNVC: 2
0802-0120: RNCC: 3 | RNVC: 2

3 Sep 1987

5340-12-362-0756
Mounting Bracket

123620756
706-650081-901-0: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-187-0789
Strap Bolt

121870789
3900054-100000.03: RNCC: 2 | RNVC: 2
1749.5.8.418: RNCC: 3 | RNVC: 2
3900054-100000-03: RNCC: 3 | RNVC: 2
3900054-100000-03: RNCC: 5 | RNVC: 2
1749-5-8-418: RNCC: 5 | RNVC: 2

5 Mar 1981

5340-12-178-9135
Angle Bracket

121789135
5562398/3: RNCC: 3 | RNVC: 2
5562398-3: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-181-0393
Electrical-Mechanical Equipment Post

121810393
1246-12.2: RNCC: 2 | RNVC: 2
1246-12.2: RNCC: 3 | RNVC: 2
1246-12-2: RNCC: 5 | RNVC: 2
1246-12-2: RNCC: 5 | RNVC: 9

19 Oct 1979

5340-12-196-9875
Angle Bracket

121969875
A-230129-055: RNCC: 3 | RNVC: 2
A230129-055: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-195-8103
Mending Plate

121958103
P-145350-074: RNCC: 3 | RNVC: 2
P145350-074: RNCC: 5 | RNVC: 2

19 Apr 1983

5340-12-197-7383
Mending Plate

121977383
A-920265-009: RNCC: 3 | RNVC: 2
A920265-009: RNCC: 5 | RNVC: 2

18 Nov 1983

5340-12-150-6330
Loop Clamp

121506330
DIN3016-1-E1-32X20-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-E1-32X20-W5: RNCC: 3 | RNVC: 2
RSGU0.32/20-W5: RNCC: 3 | RNVC: 2
RSGU32/20-1.4571: RNCC: 5 | RNVC: 2
9400720032: RNCC: 5 | RNVC: 2
RSGU32-20-1-4571: RNCC: 5 | RNVC: 2
RSGU32/20-W5: RNCC: 5 | RNVC: 2
DIN3016-E1-32X20-W5: RNCC: 5 | RNVC: 9
VG95931-E32X20-W5: RNCC: 5 | RNVC: 9
VG95931E32X20W5: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-7924
Access Cover

123217924
P-888598-401: RNCC: 3 | RNVC: 2
P888598-401: RNCC: 5 | RNVC: 2

27 Jun 1990

5340-12-328-9756
Loop Clamp

123289756
DIN3016-D1-100X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-D1-100X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1.100/20: RNCC: 3 | RNVC: 2
RSGU1.100/20-W1: RNCC: 3 | RNVC: 2
DIN3016-D1-100X20W1-2: RNCC: 5 | RNVC: 2
DIN3016-D1-100X20W1-2: RNCC: 5 | RNVC: 2

4 Jul 1992

5340-12-182-0274
Retaining Strap

121820274
DIN3016-1-F1-13X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-13X12-W1-2: RNCC: 3 | RNVC: 2
RSGU2.13/12: RNCC: 3 | RNVC: 2
9420012013: RNCC: 5 | RNVC: 2
RSGU1200.13/12: RNCC: 5 | RNVC: 2
RSGU1200-13-12: RNCC: 5 | RNVC: 2
VG95931-F13X12-W1: RNCC: 5 | RNVC: 9
DIN3016-F1-13X12-W1-2: RNCC: 5 | RNVC: 9
VG95931F13X12W1: RNCC: 5 | RNVC: 9

9 Jan 1980

5340-12-145-2713
Expansion Plug

121452713
1187.12.0.61: RNCC: 3 | RNVC: 2
2345-14000-12-28: RNCC: 5 | RNVC: 2
1187-12-0-61: RNCC: 5 | RNVC: 2
2345-14000-12-28: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-4746
Angle Bracket

123164746
P-050272-006: RNCC: 3 | RNVC: 2
P050272-006: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-700-8517
Loop Clamp

127008517
VG95211-ML-127008517: RNCC: 2 | RNVC: 2
155N1119-228: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-177-6383
Rod End Connector

121776383
S51522-0001: RNCC: 3 | RNVC: 2

12 Feb 1979

5340-12-171-6316
Loop Clamp

121716316
06.67840-0114: RNCC: 3 | RNVC: 2
06-6784-0114: RNCC: 5 | RNVC: 2
06-67840-0114: RNCC: 5 | RNVC: 2
06.67840-0114: RNCC: 5 | RNVC: 2
06678400114: RNCC: 5 | RNVC: 2
MAN194 A13: RNCC: 5 | RNVC: 2
41822366: RNCC: 5 | RNVC: 2
41822366EY8732-23: RNCC: 5 | RNVC: 2
A13MAN194: RNCC: 5 | RNVC: 9

28 Oct 1977

5340-12-702-4289
Mounting Bracket

127024289
VG95211-ML-127024289: RNCC: 2 | RNVC: 2
5.12.8101.2870.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-5802
Spring Loaded Cylinder Fastener

123655802
03090-02308: RNCC: 3 | RNVC: 2
NLM03090-02308: RNCC: 5 | RNVC: 2

18 Jan 2005

5340-12-356-0616
Retaining Strap

123560616
916016038300: RNCC: 3 | RNVC: 2
N16016-CRS 38/15 DBL8451.11: RNCC: 5 | RNVC: 9

17 Jan 2002

5340-12-365-0202
Mounting Plate

123650202
GLD99-00-111000.15: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-159-9357
Leather Strap

121599357
8473921: RNCC: 3 | RNVC: 2
0074097: RNCC: 5 | RNVC: 2
0074-097: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-307-2438
Butt Hinge Leaf

123072438
RP988534/12: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-301-9681
Double Angle Bracket

123019681
8601 3945: RNCC: 3 | RNVC: 2
86013945: RNCC: 5 | RNVC: 2
86013945ED5035-71: RNCC: 5 | RNVC: 2

21 Nov 1984

5340-12-168-1618
Retaining Strap

121681618
WW410671A: RNCC: 3 | RNVC: 2
WW410671A: RNCC: 5 | RNVC: 2
WW 410 671 A: RNCC: 5 | RNVC: 2
WW410671A: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-369-1179
Angle Bracket

123691179
7803221137AA: RNCC: 3 | RNVC: 2
1030010-721240.000.0: RNCC: 5 | RNVC: 2

24 May 2006

5340-12-184-7747
Support Hook

121847747
CF429200A: RNCC: 3 | RNVC: 2
CF 429 200 A: RNCC: 5 | RNVC: 2
CF429200A: RNCC: 5 | RNVC: 2
CF 429 200 A: RNCC: 5 | RNVC: 2

16 Aug 1980

5340-12-193-2642
Retaining Band

121932642
2092650: RNCC: 3 | RNVC: 2
2.435204: RNCC: 5 | RNVC: 2

6 Jul 1982

5340-12-187-9332
Detent Plunger

121879332
1463218010: RNCC: 3 | RNVC: 2
1 463 218 010: RNCC: 5 | RNVC: 2
7701011340: RNCC: 5 | RNVC: 2
1463218010: RNCC: 5 | RNVC: 2
7701011340: RNCC: 5 | RNVC: 2
7701011340: RNCC: 5 | RNVC: 9

19 May 1981

5340-12-349-7721
Mounting Plate

123497721
064 961: RNCC: 3 | RNVC: 2
064961 E: RNCC: 5 | RNVC: 2

6 Jan 2000

5340-12-381-3896
Mounting Bracket

123813896
4221222003: RNCC: 3 | RNVC: 2
4221222003: RNCC: 5 | RNVC: 2
15015840: RNCC: 5 | RNVC: 2

9 Feb 2010

5340-12-316-6742
Mending Plate

123166742
5800777-8200.06: RNCC: 2 | RNVC: 2
5800777-8200.06: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-321-6568
Mounting Plate

123216568
2.72-24050: RNCC: 3 | RNVC: 2
2.72-24050: RNCC: 5 | RNVC: 2

12 Jun 1990

5340-12-386-1169
Lock-Release Lever

123861169
2481-391232.001.0: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-12-340-4801
Retaining Clip

123404801
181793001: RNCC: 2 | RNVC: 2
181793001: RNCC: 3 | RNVC: 2
E 181793001: RNCC: 5 | RNVC: 2

20 Apr 1996

5340-12-302-7862
Mending Plate

123027862
CF 493 163 B: RNCC: 3 | RNVC: 2
CF 493 163 B: RNCC: 5 | RNVC: 2
CF 493 163 A: RNCC: 5 | RNVC: 9
CF 493 163 A: RNCC: 5 | RNVC: 9

30 Jan 1985

5340-12-349-8208
Mounting Bracket

123498208
46 54 2 316 626: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-375-4737
Mounting Bracket

123754737
2300014-069800.00.0: RNCC: 2 | RNVC: 2
2300014-069800.00.0: RNCC: 3 | RNVC: 2

5 Jun 2008

5340-12-187-9821
Resilient Mount

121879821
E1FH 76-02: RNCC: 3 | RNVC: 2
E1FH76-02: RNCC: 5 | RNVC: 2
103441: RNCC: 5 | RNVC: 2
35343-008: RNCC: 5 | RNVC: 2
5L.3688.001.03: RNCC: 5 | RNVC: 2
5L3688-001-03: RNCC: 5 | RNVC: 2

25 May 1981

5340-12-362-2035
Loop Clamp

123622035
HRL-2-A1TM-16-PA: RNCC: 3 | RNVC: 2
909621782: RNCC: 5 | RNVC: 2

23 Jan 2004

5340-12-155-5501
Spring Tension Clip

121555501
160-71737-01: RNCC: 3 | RNVC: 2
160-71737-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-3678
Retaining Strap

123133678
5801445-30310.01.1: RNCC: 2 | RNVC: 2
5801445-30310.01.1: RNCC: 3 | RNVC: 2

25 Mar 1988

5340-12-338-1739
Mounting Bracket

123381739
70906-635: RNCC: 3 | RNVC: 2
KB-70906-635: RNCC: 5 | RNVC: 9

31 May 1995

5340-12-193-6144
Turnbuckle Body

121936144
VG85211-23: RNCC: 2 | RNVC: 2
VG85211-23: RNCC: 3 | RNVC: 2
VG85211-2-3: RNCC: 5 | RNVC: 9

11 Aug 1982

5340-12-374-6841
Mounting Bracket

123746841
SK976-061411.000.0: RNCC: 3 | RNVC: 2
7097342: RNCC: 5 | RNVC: 2
1780197: RNCC: 5 | RNVC: 9

6 Mar 2008

5340-12-158-2306
Quick Release Plunger

121582306
02-1503-00-12-20: RNCC: 3 | RNVC: 2
02-1503-00-00-12-20: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-187-2712
Butt Hinge Leaf

121872712
870/001-046: RNCC: 2 | RNVC: 2

23 Mar 1981

5340-12-702-5358
Mounting Bracket

127025358
VG95211-ML-127025358: RNCC: 2 | RNVC: 2
5.51.7204.0590.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-339-4695
Webbing Strap

123394695
NO PRIMARY REF 12-339-4695: RNCC: 3 | RNVC: 2
79017/026-0900-0100: RNCC: 5 | RNVC: 9
79017/026-900-100: RNCC: 5 | RNVC: 9
DIN60060-2-25X100X800-C3/D2: RNCC: 5 | RNVC: 9

27 Nov 1995

5340-12-320-1024
Mending Plate

123201024
C249-A15-C112: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-197-5857
Mending Plate

121975857
A-230129-047: RNCC: 3 | RNVC: 2
A230129-047: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-196-4338
Casement Fastener

121964338
P-855943-001: RNCC: 3 | RNVC: 2
P855943-001: RNCC: 5 | RNVC: 2

6 Jul 1983

5340-12-321-5393
Kunst Gleitschiene

123215393
115011: RNCC: 3 | RNVC: 2

30 May 1990

5340-12-372-6733
Mending Plate

123726733
10.5783-302: RNCC: 3 | RNVC: 2

9 Aug 2007

5340-12-342-1555
Mounting Bracket

123421555
536D13030: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-353-8172
Access Cover

123538172
424 032 00 33: RNCC: 3 | RNVC: 2

14 May 2001

5340-12-325-0898
Mounting Bracket

123250898
5420U: RNCC: 3 | RNVC: 2

30 Apr 1991

5340-12-320-8474
Angle Bracket

123208474
33 43602A00002: RNCC: 3 | RNVC: 2

22 Feb 1990

5340-12-195-4309
Loop Clamp

121954309
PAN6636A12: RNCC: 3 | RNVC: 2

24 Feb 1983

5340-12-305-4963
Lock-Release Lever

123054963
0001623004: RNCC: 3 | RNVC: 2

14 Nov 1985

5340-12-198-5829
Metal Runner

121985829
4900123-5300.00: RNCC: 2 | RNVC: 2
4900123-5300.00: RNCC: 3 | RNVC: 2
4900123-5300.00: RNCC: 3 | RNVC: 2
4900123-5300.00: RNCC: 3 | RNVC: 2
4900123-5300.00: RNCC: 5 | RNVC: 9
4900123-5300.00: RNCC: 5 | RNVC: 9

14 Feb 1984

5340-12-305-5676
Angle Bracket

123055676
4069125314: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-305-7641
Double Angle Bracket

123057641
106069: RNCC: 3 | RNVC: 2

10 Dec 1985

5340-12-301-5471
Angle Bracket

123015471
2300106-250300.03: RNCC: 2 | RNVC: 2
2300106-250300.03: RNCC: 3 | RNVC: 2
2300106-250300.03: RNCC: 5 | RNVC: 9
2300106-250300.03: RNCC: 5 | RNVC: 9

24 Oct 1984

5340-12-322-8136
Mounting Bracket

123228136
54.0070.625.00: RNCC: 2 | RNVC: 2
54.0070.625.00: RNCC: 3 | RNVC: 2

25 Sep 1990

5340-12-316-7987
Angle Bracket

123167987
105-98380.11: RNCC: 3 | RNVC: 2

14 Feb 1989

5340-12-393-1669
Section Block Clamp

123931669
06.66022-1305: RNCC: 3 | RNVC: 2
06.66022-1305: RNCC: 5 | RNVC: 2

14 Aug 2013

5340-12-393-2743
Mechanic Equipment Hardware Kit

123932743
9258741002: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-12-362-7407
Mounting Bracket

123627407
5200.112.050.000: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-12-369-4290
Detent Plunger

123694290
2433124037: RNCC: 3 | RNVC: 2

3 Jul 2006

5340-12-300-6878
Angle Bracket

123006878
2300005-6005.00: RNCC: 2 | RNVC: 2
9851072: RNCC: 3 | RNVC: 2
2300005-6005.00: RNCC: 5 | RNVC: 9
9851072: RNCC: 5 | RNVC: 9

23 Aug 1984

5340-12-351-7719
Section Block Clamp

123517719
JN0413CCEE62: RNCC: 3 | RNVC: 2

22 Aug 2000

5340-12-391-6281
Dust And Moisture Seal Protective Cover

123916281
11.28044-1147: RNCC: 3 | RNVC: 2
11.28044-1147: RNCC: 5 | RNVC: 2
280.24.008: RNCC: 5 | RNVC: 9

22 Mar 2013

5340-12-145-6719

5340-12-011-0582

5340-12-332-4113
Mending Plate

123324113
0851 7753.015: RNCC: 3 | RNVC: 2
0851 7564.051: RNCC: 5 | RNVC: 2
8517564FA T.51: RNCC: 5 | RNVC: 9
8517753FA T.15: RNCC: 5 | RNVC: 9

9 Aug 1993

5340-12-375-9344
Lock-Release Lever

123759344
2229758: RNCC: 3 | RNVC: 2
02229757-1-B: RNCC: 5 | RNVC: 2

22 Jul 2008

5340-12-304-1076
Pad Eye

123041076
25704-289720.06.0: RNCC: 2 | RNVC: 2
413132.463: RNCC: 3 | RNVC: 2
413132.463: RNCC: 5 | RNVC: 9
413132.4634: RNCC: 5 | RNVC: 9

12 Jun 1985

5340-12-340-6279
Angle Bracket

123406279
SH1.190.811.3: RNCC: 2 | RNVC: 2
SH1.190.811.3: RNCC: 3 | RNVC: 2

14 May 1996

5340-12-389-2075
Mending Plate

123892075
1661-183100.032.0: RNCC: 2 | RNVC: 2
1661-183100.032.0: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-12-325-1542
Swivel Caster

123251542
LKAN125TF-2: RNCC: 3 | RNVC: 9

8 May 1991

5340-12-309-0100
Hand Crank

123090100
0094.0357.1: RNCC: 3 | RNVC: 2

5 Dec 1986

5340-12-193-5888
Mounting Plate

121935888
4606200111: RNCC: 3 | RNVC: 2
S 721 1 64 085 2: RNCC: 3 | RNVC: 9
460 620 01 11: RNCC: 5 | RNVC: 2

9 Aug 1982

5340-12-343-0942
Mounting Bracket

123430942
5098-005: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-191-0788
Rod End Clevis

121910788
4-83089: RNCC: 3 | RNVC: 2

11 Jan 1982

5340-12-332-8472
Nonmetallic Bumper

123328472
5 87 03 013: RNCC: 3 | RNVC: 2
58703013: RNCC: 5 | RNVC: 2

27 Sep 1993

5340-12-147-4055
Loop Clamp

121474055
7C1-14W: RNCC: 3 | RNVC: 2
7C1-14W: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-355-3378
Zugangsklapp Rolle

123553378
V6507-20076-102: RNCC: 2 | RNVC: 2
V6507-20076-102: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-12-701-8549
Loop Clamp

127018549
VG95211-ML-127018549: RNCC: 2 | RNVC: 2
5891A-12: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-306-6072
Butt Hinge Leaf

123066072
28.04.206-031.04: RNCC: 3 | RNVC: 2
284-206-031-040: RNCC: 5 | RNVC: 2

14 Mar 1986

5340-12-313-5682
Lock-Release Lever

123135682
4900059-734102.002.0: RNCC: 3 | RNVC: 2
1228696: RNCC: 5 | RNVC: 2

16 Apr 1988

5340-12-702-4956
Mounting Plate

127024956
VG95211-ML-127024956: RNCC: 2 | RNVC: 2
5.51.5101.1251.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-331-1934
Mounting Bracket

123311934
706-153000-001-0: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-12-310-5933
Access Cover

123105933
23223-061400.00.0: RNCC: 2 | RNVC: 2
23223-061400.00.0: RNCC: 3 | RNVC: 2

4 Jun 1987

5340-12-155-1656
Rod End Clevis

121551656
160-22794-03: RNCC: 3 | RNVC: 2
160-22794-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-6535
Angle Bracket

127016535
VG95211-ML-127016535: RNCC: 2 | RNVC: 2
5.12.7207.1210.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-178-9024
Platte

121789024
5801215-0-051: RNCC: 3 | RNVC: 2
5801215-0.051: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-340-0840
Spacing Threaded Standoff

123400840
2W132D002-2000.10: RNCC: 2 | RNVC: 2
2W132D002-2000.10: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-131-0685
Loop Clamp

121310685
3360160EE0144-39: RNCC: 3 | RNVC: 2
0144-39-07-01: RNCC: 5 | RNVC: 2
909621506: RNCC: 5 | RNVC: 2
0336 0160: RNCC: 5 | RNVC: 2
3360160: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-369-0201
Access Cover

123690201
160-13524-03: RNCC: 3 | RNVC: 2

15 May 2006

5340-12-701-9917
Loop Clamp

127019917
VG95211-ML-127019917: RNCC: 2 | RNVC: 2
155N464-299: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-311-2948
Access Cover

123112948
2500179-196440.000.0: RNCC: 2 | RNVC: 2
2500179-196440.000.0: RNCC: 3 | RNVC: 2

13 Aug 1987

5340-12-310-7460
Handle Grip

123107460
4.0598-01: RNCC: 3 | RNVC: 2
570577577: RNCC: 5 | RNVC: 2
40598-01: RNCC: 5 | RNVC: 2

26 Jun 1987

5340-12-359-9228
Mounting Plate

123599228
2819-191000.006.0: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-12-701-2497
Mounting Bracket

127012497
VG95211-ML-127012497: RNCC: 2 | RNVC: 2
5.12.3610.8020.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-376-1875
Antipilferage Seal

123761875
1-40-22955-650: RNCC: 3 | RNVC: 2

22 Aug 2008

5340-12-384-8854
Retaining Strap

123848854
MMN325-3/2 D9-18-S235JR: RNCC: 3 | RNVC: 2
700325018106: RNCC: 5 | RNVC: 2

7 Apr 2011

5340-12-315-1204
Nonmetallic Bumper

123151204
42191158: RNCC: 3 | RNVC: 2
4219 1158: RNCC: 5 | RNVC: 2
42191158KZ5095-04: RNCC: 5 | RNVC: 2

17 Sep 1988

5340-12-190-6750
Loop Clamp

121906750
DIN3016-2-G1-155X30-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-155X30-W1-2: RNCC: 3 | RNVC: 2
SP155/30SK: RNCC: 3 | RNVC: 2
01212322: RNCC: 5 | RNVC: 2
1212322: RNCC: 5 | RNVC: 2
1212322EE8932-22: RNCC: 5 | RNVC: 2
1810000155: RNCC: 5 | RNVC: 2
VG95931-G155X30-W1: RNCC: 5 | RNVC: 9
DIN3016-G1-155X30-W1-2: RNCC: 5 | RNVC: 9
VG95931 G155X30-W1: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-354-0398
Angle Bracket

123540398
J92224267-001: RNCC: 3 | RNVC: 2

30 May 2001

5340-12-321-8752
Double Angle Bracket

123218752
90-SKS-188: RNCC: 2 | RNVC: 2
90-SKS-188: RNCC: 3 | RNVC: 2
90-SKS-188: RNCC: 5 | RNVC: 9

5 Jul 1990

5340-12-300-9919
Angle Bracket

123009919
P-855017-002: RNCC: 3 | RNVC: 2
P855017-002: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-702-4773
Mounting Bracket

127024773
VG95211-ML-127024773: RNCC: 2 | RNVC: 2
5.51.0605.0310.04: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-700-8961
Rod End Connector

127008961
VG95211-ML-127008961: RNCC: 2 | RNVC: 2
2.11.4207.0660.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-371-5181
Dust And Moisture Seal Protective Cap

123715181
1420050050: RNCC: 3 | RNVC: 2
1 420 050 050: RNCC: 5 | RNVC: 2

12 Apr 2007

5340-12-300-8733
Double Angle Bracket

123008733
1423-320.04(4): RNCC: 3 | RNVC: 2

6 Sep 1984

5340-12-385-3546
Spacing Threaded Standoff

123853546
5.14.171: RNCC: 3 | RNVC: 2

25 May 2011

5340-12-090-4368

5340-12-702-8885
Loop Clamp

127028885
T2-95-25 12CH18N10T CHIM.PAS. G-: RNCC: 3 | RNVC: 1

26 Feb 1996

5340-12-190-0434
Helical Compression Spring Retainer

121900434
F1114199-0001: RNCC: 3 | RNVC: 2
F11.14199-0001: RNCC: 5 | RNVC: 2
F11.14199-0001: RNCC: 5 | RNVC: 2

4 Nov 1981

5340-12-375-1444
Access Cover

123751444
L621M1008102: RNCC: 3 | RNVC: 2

25 Apr 2008

5340-12-023-0954

5340-12-335-5542
Spring Tension Clip

123355542
4604702381: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-12-194-6292
Nonmetallic Bumper

121946292
171823499: RNCC: 3 | RNVC: 2
171 823 499: RNCC: 5 | RNVC: 9

23 Nov 1982

5340-12-347-9403
Double Angle Bracket

123479403
3600021-101300.03: RNCC: 2 | RNVC: 2
0106.10303.080: RNCC: 3 | RNVC: 2
3600021-101300.03: RNCC: 5 | RNVC: 2

16 Mar 1999

5340-12-327-7275
Dust And Moisture Seal Protective Plug

123277275
279.627 256: RNCC: 3 | RNVC: 2
1300839-009003.004: RNCC: 5 | RNVC: 9

24 Feb 1992

5340-12-186-7440
Angle Bracket

121867440
5802206-002000-002: RNCC: 2 | RNVC: 2
535.5649: RNCC: 3 | RNVC: 2
5355649: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-179-6760
Retaining Clip

121796760
171881449-01C: RNCC: 3 | RNVC: 2

18 Jul 1979

5340-12-701-9085
Antipilferage Seal Locking Wire

127019085
VG95211-ML-127019085: RNCC: 2 | RNVC: 2
OST1 11067-71: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-163-0340
Angle Bracket

121630340
27 720-001: RNCC: 3 | RNVC: 2
27720-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-307-8945
Retaining Strap

123078945
R51022: RNCC: 3 | RNVC: 9
2033-357: RNCC: 3 | RNVC: 9
2033E-357-R51022: RNCC: 5 | RNVC: 9

7 Aug 1986

5340-12-360-3021
Mounting Bracket

123603021
1864415803: RNCC: 3 | RNVC: 2
1864415803: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-378-4078
Loop Clamp

123784078
RAPR 4-112: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-12-172-0628
Mending Plate

121720628
1000078-112000.02: RNCC: 2 | RNVC: 2
1000078-112000.02: RNCC: 3 | RNVC: 2
1000078-112000-02: RNCC: 5 | RNVC: 9
1000078-112000.02: RNCC: 5 | RNVC: 9
1000078-112000-02: RNCC: 5 | RNVC: 9
1000078-112000.02: RNCC: 5 | RNVC: 9

19 Dec 1977

5340-12-180-9311
Dust And Moisture Seal Protective Cap

121809311
AFG014750: RNCC: 3 | RNVC: 2
AFG17-01-09-01-13: RNCC: 5 | RNVC: 2

11 Oct 1979

5340-12-386-5655
Section Block Clamp

123865655
2500262-192082.000.0: RNCC: 3 | RNVC: 2

12 Sep 2011

5340-12-305-3221
Bow Handle

123053221
582K1092-000-00.3: RNCC: 3 | RNVC: 2
4358157136: RNCC: 5 | RNVC: 2

22 Oct 1985

5340-12-311-5127
Dust And Moisture Seal Protective Cap

123115127
2410500017: RNCC: 3 | RNVC: 2

11 Sep 1987

5340-12-376-9276
Access Cover

123769276
4256801507: RNCC: 3 | RNVC: 2
7089267: RNCC: 5 | RNVC: 2

24 Nov 2008

5340-12-317-3941
Retaining Strap

123173941
3129950232: RNCC: 3 | RNVC: 2

4 Apr 1989

5340-12-183-7426
Retaining Strap

121837426
769-117000-00-0: RNCC: 3 | RNVC: 2
769-117000-00-0: RNCC: 5 | RNVC: 9

15 May 1980

5340-12-321-6303
Webbing Strap

123216303
23321-189332.04.0: RNCC: 3 | RNVC: 2
1298680: RNCC: 5 | RNVC: 2

8 Jun 1990

5340-12-361-7856
Spacing Threaded Standoff

123617856
22-4804 265-0014: RNCC: 3 | RNVC: 2

18 Nov 2003

5340-12-361-4057
Access Cover

123614057
4240320033: RNCC: 3 | RNVC: 2
51916060098: RNCC: 5 | RNVC: 2
51.91606-0098: RNCC: 5 | RNVC: 2

24 Sep 2003

5340-12-363-4683
Angle Bracket

123634683
J21520060-403: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-12-377-8799
Retaining Strap

123778799
4100036-150800.199: RNCC: 2 | RNVC: 2
4100036-150800.199: RNCC: 3 | RNVC: 2

18 Feb 2009

5340-12-321-1800
Spring Loaded Cylinder Fastener

123211800
2500067-102131.00: RNCC: 2 | RNVC: 2
2500067-102131.00: RNCC: 3 | RNVC: 2

9 Apr 1990

5340-12-310-6891
Resilient Mount

123106891
2300223-220000.01.0: RNCC: 2 | RNVC: 2
80700-2300223-220000.01.0: RNCC: 3 | RNVC: 2
2300223-220000.01.0: RNCC: 3 | RNVC: 2
2300223-220000.01.0: RNCC: 5 | RNVC: 2

22 Jun 1987

5340-12-329-5370
Mending Plate

123295370
DIN3015-Z-AP-4-W1: RNCC: 2 | RNVC: 2
AP-B4: RNCC: 3 | RNVC: 2
SP4D: RNCC: 3 | RNVC: 2
7005099: RNCC: 5 | RNVC: 2
ZS2100215.004: RNCC: 5 | RNVC: 2
AP-B4: RNCC: 5 | RNVC: 2

28 Aug 1992

5340-12-344-8629
Mounting Bracket

123448629
5803514-202110.00: RNCC: 2 | RNVC: 2
55.0205.348.00: RNCC: 3 | RNVC: 2
5803514-202110.00: RNCC: 5 | RNVC: 9

22 Dec 1997

5340-12-390-6330
Angle Bracket

123906330
313043: RNCC: 3 | RNVC: 2
2170-02-13-02/37: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-12-351-3840
Bow Handle

123513840
GN565-26-160-SW: RNCC: 3 | RNVC: 2
GN565-26-160-SW: RNCC: 5 | RNVC: 2

20 Jul 2000

5340-12-154-8485
Loop Clamp

121548485
51.5028.030-00: RNCC: 3 | RNVC: 2
51-5028-030-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-130-8816
Retaining Strap

121308816
DIN72571-1X10-ST: RNCC: 2 | RNVC: 2
DIN72571-1X10-ST: RNCC: 3 | RNVC: 2
1X10DIN72571-ST: RNCC: 5 | RNVC: 2
1X10DIN72571ST: RNCC: 5 | RNVC: 2
1X10DIN72571STR0H: RNCC: 5 | RNVC: 2
0592 10: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-311-5144
Access Cover

123115144
6054880: RNCC: 3 | RNVC: 2
605.4880: RNCC: 5 | RNVC: 2

11 Sep 1987

5340-12-196-6571
Spring Tension Clip

121966571
SH9500E605: RNCC: 3 | RNVC: 2
SH9500E605: RNCC: 5 | RNVC: 9
SH9500E605: RNCC: 5 | RNVC: 9

28 Jul 1983

5340-12-363-3387
Dust And Moisture Seal Protective Plug

123633387
350I29RAL9005: RNCC: 3 | RNVC: 2
GPN350I29SCHWARZ: RNCC: 5 | RNVC: 2

27 May 2004

5340-12-337-7695
Support Hook

123377695
4607920384: RNCC: 3 | RNVC: 2
460 792 03 84: RNCC: 5 | RNVC: 2

10 Apr 1995

5340-12-309-3468
Extension Drawer Slide

123093468
BD9101E249: RNCC: 3 | RNVC: 2
BD9101E249: RNCC: 5 | RNVC: 9

16 Jan 1987

5340-12-372-4744
Angle Bracket

123724744
9424314240: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-12-360-0776
Access Cover

123600776
9418400225: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-12-312-7788
Mounting Bracket

123127788
P-243770-702: RNCC: 3 | RNVC: 2
P243770-702: RNCC: 5 | RNVC: 2

4 Feb 1988

5340-12-701-5234
Mounting Bracket

127015234
VG95211-ML-127015234: RNCC: 2 | RNVC: 2
5.12.6101.0001.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-024-4975

5340-12-164-7206
Strap Bolt

121647206
160-73614-10: RNCC: 3 | RNVC: 2
160-73614-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-194-0078
Resilient Mount

121940078
5118001/11MN60: RNCC: 3 | RNVC: 2
5118001.15: RNCC: 5 | RNVC: 2
5118001.60SH: RNCC: 5 | RNVC: 2
5118001.60SHORE: RNCC: 5 | RNVC: 2

22 Sep 1982

5340-12-163-1187
Angle Bracket

121631187
22 017-001: RNCC: 3 | RNVC: 2
22017-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-185-8755
Electrical-Mechanical Equipment Post

121858755
32 368-001: RNCC: 3 | RNVC: 2
32368-001: RNCC: 5 | RNVC: 2

6 Nov 1980

5340-12-197-4158
Angle Bracket

121974158
64452070: RNCC: 3 | RNVC: 2
4452/070: RNCC: 5 | RNVC: 9
5801357-7300-06: RNCC: 5 | RNVC: 9
5801357-7300.06: RNCC: 5 | RNVC: 9
5801357-7300-06: RNCC: 5 | RNVC: 9
5801357-7300.06: RNCC: 5 | RNVC: 9

20 Oct 1983

5340-12-371-5964
Mending Plate

123715964
183513621: RNCC: 3 | RNVC: 2
E 18 351 3621: RNCC: 5 | RNVC: 2

23 Apr 2007

5340-12-374-3903
Mechanical Stop

123743903
4372910041: RNCC: 3 | RNVC: 2
7096779: RNCC: 5 | RNVC: 2
A 437 291 00 41: RNCC: 5 | RNVC: 9

13 Feb 2008

5340-12-354-1145
Swivel Caster

123541145
9-61NY: RNCC: 3 | RNVC: 2

6 Jun 2001

5340-12-164-0898
Mending Plate

121640898
4-74421: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-193-0400
Escutcheon Plate

121930400
4617250048: RNCC: 3 | RNVC: 2
721 1 67 004 1: RNCC: 5 | RNVC: 9

16 Jun 1982

5340-12-327-4551
Dust And Moisture Seal Protective Plug

123274551
V5-SCHWARZ: RNCC: 3 | RNVC: 2
11 10133: RNCC: 5 | RNVC: 2
0029971486: RNCC: 5 | RNVC: 2

23 Jan 1992

5340-12-376-4305
Protection Bellows

123764305
81082010425: RNCC: 3 | RNVC: 2
81.08201-0425: RNCC: 5 | RNVC: 2

29 Sep 2008

5340-12-377-7015
Access Cover

123777015
4100036-181520.001: RNCC: 2 | RNVC: 2
4100036-181520.001: RNCC: 3 | RNVC: 2

4 Feb 2009

5340-12-171-8195
Sicherungs- Kette

121718195
5340-001: RNCC: 2 | RNVC: 9
530004: RNCC: 5 | RNVC: 9

18 Nov 1977

5340-12-302-8320
Metal Runner

123028320
4900123-2100.01: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-360-8446
Spacing Threaded Standoff

123608446
EEDB3025: RNCC: 3 | RNVC: 2
EEDB3025: RNCC: 5 | RNVC: 9

16 Jul 2003

5340-12-300-3134
Double Angle Bracket

123003134
3098100114: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-300-1309
Hand Crank

123001309
2996.54.23: RNCC: 3 | RNVC: 2

5 Jul 1984

5340-12-391-4685
Access Cover

123914685
I006002TAN686A: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-353-0682
Loop Clamp

123530682
90570850: RNCC: 3 | RNVC: 2

25 Jan 2001

5340-12-367-1925
Butt Hinge

123671925
S252M3178210: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-12-391-4211
Mechanical Stop

123914211
M539M179220000: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-043-4289

5340-12-385-5547
Manual Control Lever

123855547
9246493000: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-12-043-4214

5340-12-042-5249

5340-12-375-1049
Mechanical Stop

123751049
129377: RNCC: 3 | RNVC: 2

22 Apr 2008

5340-12-042-4385

5340-12-094-2100

5340-12-352-2968
Dust And Moisture Seal Protective Cap

123522968
5583188: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-352-2635
Access Cover

123522635
5205989: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-12-318-8721
Mounting Bracket

123188721
81062305131: RNCC: 3 | RNVC: 2
81.06230.5131: RNCC: 5 | RNVC: 2

22 Aug 1989

5340-12-366-9630
Mounting Plate

123669630
944760377: RNCC: 3 | RNVC: 2

24 Jun 2005

5340-12-182-0601
Angle Bracket

121820601
81974860028: RNCC: 3 | RNVC: 2

9 Jan 1980

5340-12-329-3473
Retaining Band

123293473
003000809: RNCC: 3 | RNVC: 2

8 Aug 1992

5340-12-318-8750
Resilient Mount

123188750
2-01-013115-02: RNCC: 3 | RNVC: 9

22 Aug 1989

5340-12-191-2425
Metal Runner

121912425
0993972: RNCC: 3 | RNVC: 2
75D10.11.30-3: RNCC: 5 | RNVC: 2

19 Jan 1982

5340-12-184-3669
Swivel Caster

121843669
11-250: RNCC: 3 | RNVC: 2
2250290: RNCC: 5 | RNVC: 2

22 Jul 1980

5340-12-162-5029
Retaining Strap

121625029
1918-121715-008: RNCC: 2 | RNVC: 2
1918-121715-008: RNCC: 5 | RNVC: 2
1918-121715.008: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-311-3536
Angle Bracket

123113536
G32099-X2250-B2: RNCC: 3 | RNVC: 2
71-60-104-052: RNCC: 5 | RNVC: 2

21 Aug 1987

5340-12-150-3129
Angle Bracket

121503129
C20122A159C6: RNCC: 3 | RNVC: 2
TFS12-98938: RNCC: 5 | RNVC: 2
C20122-A159-C6: RNCC: 5 | RNVC: 2
TBK159T6: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-352-4938
Mounting Bracket

123524938
521910-060232.000.0: RNCC: 2 | RNVC: 2
521910-060232.000.0: RNCC: 3 | RNVC: 2
1272547: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-319-0309
Spring Loaded Cylinder Fastener

123190309
2654-336223.00: RNCC: 2 | RNVC: 2
2654-336223.00: RNCC: 3 | RNVC: 2
2654-336 223.00: RNCC: 5 | RNVC: 9
2654-336 223.00: RNCC: 5 | RNVC: 9
679-08040000: RNCC: 5 | RNVC: 9

31 Aug 1989

5340-12-352-5872
Bow Handle

123525872
050-010116G: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-12-304-1195
Extension Drawer Slide Section

123041195
C79123-Z738-A8: RNCC: 3 | RNVC: 2
71-70-130-003: RNCC: 5 | RNVC: 2

12 Jun 1985

5340-12-353-4239
Spring Tension Clip

123534239
J71620041-001: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-12-308-9032
Electrical-Mechanical Equipment Post

123089032
KM.S01-210100.019: RNCC: 3 | RNVC: 2

27 Nov 1986

5340-12-384-4612
Rod End Clevis

123844612
DIN71752-G16X32FG-A3P: RNCC: 2 | RNVC: 2
160200160032: RNCC: 3 | RNVC: 2
DIN71752-G16X32FG-A3P: RNCC: 5 | RNVC: 2
DIN71752-G16X32FG-A3P: RNCC: 5 | RNVC: 2

24 Feb 2011

5340-12-330-1533
Retaining Strap

123301533
160-73105-43: RNCC: 3 | RNVC: 2
15160-73105-43: RNCC: 5 | RNVC: 2
160-73105-43: RNCC: 5 | RNVC: 9

10 Nov 1992

5340-12-122-6368
Nonmetallic Bumper

121226368
VG95092A4X1X14PUR55: RNCC: 2 | RNVC: 2
82200-A4X1X14X6.PUR55: RNCC: 3 | RNVC: 2
0009871840: RNCC: 3 | RNVC: 2
0009871840: RNCC: 5 | RNVC: 2
A4X1X14X6.55PUR: RNCC: 5 | RNVC: 2
0009879640: RNCC: 5 | RNVC: 2
1119871340: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-8031
Rod End Connector

127018031
VG95211-ML-127018031: RNCC: 2 | RNVC: 2
5.12.8400.6258.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-6824
Access Cover

123586824
2800-000405.000.0: RNCC: 2 | RNVC: 2
2800-000405.000.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-701-5795
Mounting Bracket

127015795
VG95211-ML-127015795: RNCC: 2 | RNVC: 2
5.12.6409.1020.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-305-9890
Loop Clamp

123059890
DIN3016-1-D1-9X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-9X12-W1-2: RNCC: 3 | RNVC: 2
RSGU1.9/12: RNCC: 3 | RNVC: 2
09410012009: RNCC: 5 | RNVC: 2
9410012009: RNCC: 5 | RNVC: 2
RSGU1100.9/12: RNCC: 5 | RNVC: 2
TL7008/09: RNCC: 5 | RNVC: 2
HA03/9891/03: RNCC: 5 | RNVC: 9
DIN3016-D1-9X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-D9X12-W1: RNCC: 5 | RNVC: 9

17 Jan 1986

5340-12-702-5461
Mounting Plate

127025461
VG95211-ML-127025461: RNCC: 2 | RNVC: 2
5.51.7210.2160.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-7112
Angle Bracket

127017112
VG95211-ML-127017112: RNCC: 2 | RNVC: 2
5.12.7601.3020.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-351-3178
Mounting Bracket

123513178
3099-00-043000: RNCC: 3 | RNVC: 2

13 Jul 2000

5340-12-701-6096
Mounting Bracket

127016096
VG95211-ML-127016096: RNCC: 2 | RNVC: 2
5.12.7003.1370.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-4546
Runner

123584546
2500262-192000.001.0: RNCC: 2 | RNVC: 2
2500262-192000.001.0: RNCC: 3 | RNVC: 2

18 Oct 2002

5340-12-702-1705
Mounting Plate

127021705
VG95211-ML-127021705: RNCC: 2 | RNVC: 2
30.7114.860.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-353-4571
Angle Bracket

123534571
521-120300.06.0: RNCC: 2 | RNVC: 2
521-120300.06.0: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-12-159-4281
Loop Clamp

121594281
DIN3016-D2-12-12-12-12X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-D2-12-12-12-12X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.4X12/15: RNCC: 3 | RNVC: 2
4219415012: RNCC: 5 | RNVC: 2
RSGU1100-4X12-15: RNCC: 5 | RNVC: 2
RSGU1100.4X12/15: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-375-0494
Butt Hinge

123750494
21844541-075: RNCC: 3 | RNVC: 2
21844541-075: RNCC: 5 | RNVC: 2

16 Apr 2008

5340-12-170-0362
Spring Tension Clip

121700362
62-6447-100-03: RNCC: 3 | RNVC: 2

21 Jun 1977

5340-12-021-7901

5340-12-390-0430
Loop Clamp

123900430
0009951302: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-391-0007
Dust And Moisture Seal Protective Cap

123910007
S435M20X1014: RNCC: 1 | RNVC: 2
108288200: RNCC: 3 | RNVC: 2

14 Jan 2013

5340-12-302-1762
Electrical-Mechanical Equipment Post

123021762
4493888: RNCC: 3 | RNVC: 2
449.3888: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-174-7845
Access Cover

121747845
03435614: RNCC: 3 | RNVC: 2
3435614ED5089-52: RNCC: 5 | RNVC: 2

3 Aug 1978

5340-12-164-3055
Retaining Strap

121643055
4030700966: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-392-2782
Flush Bolt

123922782
7000142: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-372-6180
Nonmetallic Bumper

123726180
4603171012: RNCC: 3 | RNVC: 2

6 Aug 2007

5340-12-393-9758
Mounting Bracket

123939758
L231M5859101: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-12-357-6930
Spring Loaded Cylinder Fastener

123576930
2212465: RNCC: 3 | RNVC: 2
2212.465: RNCC: 5 | RNVC: 2
EH2212.465: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-010-8566

5340-12-094-0962

5340-12-374-5531
Retaining Strap

123745531
L521M1823205: RNCC: 3 | RNVC: 2

26 Feb 2008

5340-12-356-8843
Nut And Bolt Locking Plate

123568843
09439200: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-12-365-1357
Strap Hinge Leaf

123651357
5099-C0003: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-12-309-7157
Access Cover

123097157
1000104-212300.39: RNCC: 3 | RNVC: 2
1000104-212300.39: RNCC: 5 | RNVC: 9

19 Feb 1987

5340-12-365-6895
Nonmetallic Bumper

123656895
1159870840: RNCC: 3 | RNVC: 2

25 Jan 2005

5340-12-364-5944
Mounting Plate

123645944
0242 6729: RNCC: 3 | RNVC: 2
571210777: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-12-357-3454
Dust And Moisture Seal Protective Plug

123573454
8809970535: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-12-357-8642
Mounting Bracket

123578642
2300042-255211.000: RNCC: 2 | RNVC: 2
2300042-255211.000: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-12-312-7273
Mounting Bracket

123127273
3818201214: RNCC: 3 | RNVC: 2
381 820 12 14: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-308-1600
Sliding Stay

123081600
0336 8583: RNCC: 3 | RNVC: 2
3368583: RNCC: 5 | RNVC: 2
3368583EE0153-44: RNCC: 5 | RNVC: 2

9 Sep 1986

5340-12-316-6740
Mounting Bracket

123166740
5800777-8210: RNCC: 2 | RNVC: 2
5800777-8210: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-302-1372
Nonmetallic Bumper

123021372
4178855: RNCC: 3 | RNVC: 2
S12B.F01.07.00.006: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-362-4756
Nonmetallic Bumper

123624756
SJ5705: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-12-348-5408
Plain Solid Disk

123485408
KMS12500AV-737698501000: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-12-383-1431
Bumper

123831431
26112-05001855: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-12-348-0973
Mounting Plate

123480973
1651-084010.000.0: RNCC: 2 | RNVC: 2
1651-084010.000.0: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-12-140-8704
Lenkradsicherung

121408704
SS52.0800-01-000: RNCC: 3 | RNVC: 2
790503677: RNCC: 5 | RNVC: 2
183419999: RNCC: 5 | RNVC: 2
52-0800-01-00CV: RNCC: 5 | RNVC: 2
9277715003: RNCC: 5 | RNVC: 2
81926110060: RNCC: 5 | RNVC: 2
4044620073: RNCC: 5 | RNVC: 2
81.92611-0060: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-311-2984
Control Rod

123112984
6620-45-11.10: RNCC: 3 | RNVC: 2
5800689-122150: RNCC: 5 | RNVC: 2

13 Aug 1987

5340-12-386-0908
Expansion Shield

123860908
NO PRIMARY REF 12-386-0908: RNCC: 3 | RNVC: 2
050244: RNCC: 5 | RNVC: 2
O50244: RNCC: 5 | RNVC: 2
2500601558: RNCC: 5 | RNVC: 2

8 Aug 2011

5340-12-305-5176
Mending Plate

123055176
2300124-180000.006.0: RNCC: 2 | RNVC: 2
2300124-180000.006.0: RNCC: 3 | RNVC: 2
2300124-180000.006.0: RNCC: 3 | RNVC: 2
2300124-180000.006.0: RNCC: 5 | RNVC: 9

18 Nov 1985

5340-12-703-3434
Retaining Strap

127033434
VG95211-ML-127033434: RNCC: 2 | RNVC: 2
N1119-614: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-148-6277
Strap Fastener Loop

121486277
3200014: RNCC: 3 | RNVC: 2
5800267-113-003: RNCC: 5 | RNVC: 2
5800267-113.003: RNCC: 5 | RNVC: 2
0064-001: RNCC: 5 | RNVC: 2
0064001: RNCC: 5 | RNVC: 2
8404032: RNCC: 5 | RNVC: 2
33060: RNCC: 5 | RNVC: 2
2545-31-91: RNCC: 5 | RNVC: 9
5800267-113.003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-123-2266
Butt Hinge

121232266
5166-36-63-30: RNCC: 3 | RNVC: 2
5166-36-63.30: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-172-8822
Electrical-Mechanical Equipment Post

121728822
VG95148B6XM3X25-ST: RNCC: 2 | RNVC: 2
VG95148B6XM3X25-ST: RNCC: 3 | RNVC: 2
0801-04: RNCC: 3 | RNVC: 2

27 Feb 1978

5340-12-330-0840
Dust And Moisture Seal Protective Cap-Plug

123300840
GPN950/0157: RNCC: 3 | RNVC: 2
GPN950-0157: RNCC: 5 | RNVC: 2
950/0157: RNCC: 5 | RNVC: 2

30 Oct 1992

5340-12-186-6151
Butt Hinge

121866151
631354-2000 MM: RNCC: 3 | RNVC: 2
631354-2000MM: RNCC: 5 | RNVC: 9

21 Jan 1981

5340-12-176-2781
Webbing Strap

121762781
23111-4267.00: RNCC: 2 | RNVC: 2
23111-4267.00: RNCC: 3 | RNVC: 2
983169-257: RNCC: 3 | RNVC: 2
23111-4267.00: RNCC: 3 | RNVC: 9
23111-4267-00: RNCC: 5 | RNVC: 2
23111-4267-00: RNCC: 5 | RNVC: 9
23111-4267-00: RNCC: 5 | RNVC: 9
23111-4267.00: RNCC: 5 | RNVC: 9
000-B2-25X2,5X500-BW-RAL6031: RNCC: 6 | RNVC: 9

23 Nov 1978

5340-12-353-9189
Access Cover

123539189
12154404: RNCC: 3 | RNVC: 2
1215-4404: RNCC: 5 | RNVC: 2

18 May 2001

5340-12-164-8509
Mending Plate

121648509
28 484-001: RNCC: 3 | RNVC: 2
28484-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-361-6711
Retaining Strap

123616711
J28220375-001: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-360-3532
Retaining Strap

123603532
0009550601: RNCC: 3 | RNVC: 2
0009550601: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-388-4398
Access Cover

123884398
1030124-971003.000.0: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-310-4927
Rod End Clevis

123104927
0122 1269: RNCC: 3 | RNVC: 2
01221269: RNCC: 5 | RNVC: 9
6.1270.01.0.808.4: RNCC: 5 | RNVC: 9

27 May 1987

5340-12-320-7045
Angle Bracket

123207045
CF 802 237 A: RNCC: 2 | RNVC: 2
CF 802 237 A: RNCC: 3 | RNVC: 2
CF 802 237 A: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-385-5331
Mounting Bracket

123855331
10187-188922.000.0: RNCC: 2 | RNVC: 2
10187-188922.000.0: RNCC: 3 | RNVC: 2

14 Jun 2011

5340-12-319-7716
Nonmetallic Bumper

123197716
64 035 019A: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-12-342-9321
Pad Eye

123429321
2028R13000L1-2: RNCC: 3 | RNVC: 2
5340AA2046144: RNCC: 5 | RNVC: 9

16 Apr 1997

5340-12-316-5773
Rod End Clevis

123165773
1000192-01 2 31000.02: RNCC: 2 | RNVC: 2
1000192-01 2 31000.02: RNCC: 3 | RNVC: 2
1000192-01 2 31000.02: RNCC: 5 | RNVC: 9
10003-01 2 31200.02: RNCC: 5 | RNVC: 9
10003-01 2 31200.02: RNCC: 5 | RNVC: 9

25 Jan 1989

5340-12-173-8542
Retaining Strap

121738542
P-296652-007: RNCC: 3 | RNVC: 2
P296652-007: RNCC: 5 | RNVC: 2

17 May 1978

5340-12-366-1362
Mounting Bracket

123661362
2500267-191810.015.0: RNCC: 2 | RNVC: 2
2500267-191810.015.0: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-12-313-8434
Butt Hinge

123138434
M129A GROESZE 39/175: RNCC: 3 | RNVC: 2
M120-129 SIZE 39: RNCC: 5 | RNVC: 9

11 May 1988

5340-12-195-2117
Electrical-Mechanical Equipment Post

121952117
4510730: RNCC: 3 | RNVC: 2
451.0730: RNCC: 5 | RNVC: 2
5801443-130900-002: RNCC: 5 | RNVC: 9

26 Jan 1983

5340-12-004-2345

5340-12-004-4236

5340-12-322-9076
Filler Opening Cap

123229076
0730990359: RNCC: 3 | RNVC: 2

5 Oct 1990

5340-12-182-8103
Extension Drawer Slide Section

121828103
GR4010T017: RNCC: 3 | RNVC: 2
GR4010T017: RNCC: 3 | RNVC: 9

27 Feb 1980

5340-12-336-0874
Flush Lock

123360874
E509: RNCC: 3 | RNVC: 2

20 Oct 1994

5340-12-139-5878

5340-12-387-9278
Mounting Bracket

123879278
7093559: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-387-6502
Mounting Bracket

123876502
30210: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-12-361-9861
Casement Fastener

123619861
BVK6: RNCC: 3 | RNVC: 2

12 Dec 2003

5340-12-316-1920
Butt Hinge

123161920
4607600117: RNCC: 3 | RNVC: 2

30 Dec 1988

5340-12-382-2231
Bow Handle

123822231
108082100005: RNCC: 3 | RNVC: 2

25 May 2010

5340-12-043-2036

5340-12-352-3638
Dust And Moisture Seal Protective Cap

123523638
200Z22X18RAL3000: RNCC: 3 | RNVC: 2
200Z22X18ROUGE: RNCC: 5 | RNVC: 2
GPN200Z22X18RAL3000: RNCC: 5 | RNVC: 2
200Z22X18 ROT: RNCC: 5 | RNVC: 9

10 Nov 2000

5340-12-320-4065
Mending Plate

123204065
40 0165 463: RNCC: 3 | RNVC: 2
40 0165 463: RNCC: 5 | RNVC: 9

11 Jan 1990

5340-12-183-1037
Multiple Angle Bracket

121831037
42024596: RNCC: 3 | RNVC: 2
42024596EE5052-81: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-197-0758
Door Button

121970758
4355800083: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-12-316-7416
Resilient Mount

123167416
E1N 3218S03: RNCC: 3 | RNVC: 2
E1N3218S03: RNCC: 5 | RNVC: 2

8 Feb 1989

5340-12-316-4171
Helical Compression Spring Retainer

123164171
6378704: RNCC: 3 | RNVC: 2

17 Jan 1989

5340-12-094-9781

5340-12-145-5349
Klemme

121455349
3220700066: RNCC: 3 | RNVC: 2
3220700066: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-372-5548
Spring Tension Clip

123725548
0007270246: RNCC: 3 | RNVC: 2

27 Jul 2007

5340-12-050-0661

5340-12-315-1908
Angle Bracket

123151908
6203121584: RNCC: 3 | RNVC: 2
620 312 15 84: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-378-3428
Mounting Bracket

123783428
200 010 950 200: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-368-7347
Dust And Moisture Seal Protective Cap

123687347
13.0115.8032: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-12-177-5929

5340-12-388-7985
Butt Hinge

123887985
354.02.021: RNCC: 3 | RNVC: 2

24 Apr 2012

5340-12-372-0869
Dust And Moisture Seal Protective Cap

123720869
2522 2541-530: RNCC: 3 | RNVC: 2
2522 2541-530: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-12-190-8771
Helical Compression Spring Seat

121908771
2410516003: RNCC: 3 | RNVC: 2
8690740067: RNCC: 5 | RNVC: 2

21 Dec 1981

5340-12-303-8982
Handle Grip

123038982
7107701: RNCC: 3 | RNVC: 2

15 May 1985

5340-12-127-5441
Schluessel

121275441
513127200251: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-300-2706
Mending Plate

123002706
A11A121401211: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-194-8907
Bridge Clamp

121948907
58001332733665: RNCC: 3 | RNVC: 2
3273 665: RNCC: 5 | RNVC: 9
5800133273665: RNCC: 5 | RNVC: 9

15 Dec 1982

5340-12-381-5291
Rod End Clevis

123815291
CBD45480P05: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-12-198-1572
Retaining Strap

121981572
RP650566: RNCC: 3 | RNVC: 2

27 Dec 1983

5340-12-357-9076
Mounting Plate

123579076
6809006: RNCC: 3 | RNVC: 2

13 Aug 2002

5340-12-353-7638
Nonmetallic Bumper

123537638
08002560: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-355-4601
Spring Tension Clip

123554601
0009847961: RNCC: 3 | RNVC: 2

19 Nov 2001

5340-12-091-3412

5340-12-385-8463
Loop Clamp

123858463
0009951502: RNCC: 3 | RNVC: 2

13 Jul 2011

5340-12-386-1953
Pawl Fastener

123861953
5030172: RNCC: 3 | RNVC: 2
4017918095369: RNCC: 5 | RNVC: 2

16 Aug 2011

5340-12-379-3468
Shipping And Storage Container Twistlock

123793468
LB1: RNCC: 3 | RNVC: 2

14 Jul 2009

5340-12-348-9074
Rod End Clevis

123489074
245/7346-49-12-00: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-701-8442
Loop Clamp

127018442
VG95211-ML-127018442: RNCC: 2 | RNVC: 2
5149A-32: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-307-9753
Mending Plate

123079753
0A846.92-01-20-00-008: RNCC: 3 | RNVC: 2

15 Aug 1986

5340-12-332-4197
Lock-Release Lever

123324197
480/7397-37-00-00/08: RNCC: 3 | RNVC: 2
480-7397-37-00-00-08: RNCC: 5 | RNVC: 2

10 Aug 1993

5340-12-310-3619
Angle Bracket

123103619
2300042-188106.003: RNCC: 2 | RNVC: 2
2300042-188106.003: RNCC: 3 | RNVC: 2
2300042-188106.003: RNCC: 5 | RNVC: 9

14 May 1987

5340-12-192-6084
Retaining Strap

121926084
5835-212.009: RNCC: 3 | RNVC: 2
5835-212-009: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-314-7809
Spring Tension Clip

123147809
C42107-A435-C336: RNCC: 3 | RNVC: 2

10 Aug 1988

5340-12-153-3708
Retaining Strap

121533708
133E803X01: RNCC: 3 | RNVC: 2
133-803X01: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-174-0279
Antipilferage Seal Locking Wire

121740279
5800590-33: RNCC: 3 | RNVC: 2

31 May 1978

5340-12-326-9355
Clamping Catch

123269355
ZP2-204: RNCC: 3 | RNVC: 2

12 Nov 1991

5340-12-324-4919
Multiple Angle Bracket

123244919
7003336: RNCC: 3 | RNVC: 2
7003-336: RNCC: 5 | RNVC: 2

22 Feb 1991

5340-12-701-8483
Loop Clamp

127018483
VG95211-ML-127018483: RNCC: 2 | RNVC: 2
5160A-16: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-6564
Webbing Strap

121966564
C42123-A16-A9: RNCC: 2 | RNVC: 2
5801789-241: RNCC: 2 | RNVC: 2
5800748-96113: RNCC: 3 | RNVC: 2
5801789-241: RNCC: 3 | RNVC: 9
5801789-241: RNCC: 5 | RNVC: 2
5801789-241: RNCC: 5 | RNVC: 2
C42123-A16-A9: RNCC: 5 | RNVC: 2
000-A2-25X2,0X1000-PE-RAL6031: RNCC: 6 | RNVC: 9

28 Jul 1983

5340-12-351-2382
Nonmetallic Bumper

123512382
820-2112.14: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-12-182-7363
Mounting Bracket

121827363
25780-6000.001: RNCC: 2 | RNVC: 2
25780-6000.001: RNCC: 3 | RNVC: 2
25780-6000-001: RNCC: 5 | RNVC: 2

22 Feb 1980

5340-12-197-2872
Electrical-Mechanical Equipment Post

121972872
490126-22200-02: RNCC: 3 | RNVC: 2

7 Oct 1983

5340-12-172-1616
Extension Drawer Slide

121721616
66-3506-252-05A001: RNCC: 3 | RNVC: 2
497401: RNCC: 5 | RNVC: 2

27 Dec 1977

5340-12-377-3109
Spring Tension Clip

123773109
CTH38U10-30: RNCC: 3 | RNVC: 2
8713190: RNCC: 3 | RNVC: 2
41040495: RNCC: 5 | RNVC: 2

7 Jan 2009

5340-12-305-0595
Dust And Moisture Seal Protective Plug

123050595
0289 3207: RNCC: 3 | RNVC: 2
289 3207 EE 0704-01: RNCC: 5 | RNVC: 2
2893207: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-337-3997
Dust And Moisture Seal Protective Plug

123373997
300F242: RNCC: 3 | RNVC: 2
GPN300F242: RNCC: 5 | RNVC: 2
F242: RNCC: 5 | RNVC: 9
GPN300/F242: RNCC: 5 | RNVC: 9

28 Feb 1995

5340-12-190-7196
Metal Runner

121907196
NO PRIMARY REF 12-190-7196: RNCC: 3 | RNVC: 2
5717 135062: RNCC: 5 | RNVC: 9
5717135062: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-318-1080
Spring Tension Clip

123181080
13106: RNCC: 3 | RNVC: 2
171971843: RNCC: 5 | RNVC: 2
0059880478: RNCC: 5 | RNVC: 2
01-2802: RNCC: 5 | RNVC: 2

13 Jun 1989

5340-12-319-5896
Nonmetallic Bumper

123195896
837-14MMX12MMX3MM.NBR63: RNCC: 3 | RNVC: 2
14MMX12MMX3MM.NBR63: RNCC: 5 | RNVC: 2

16 Oct 1989

5340-12-337-8176
Webbing Strap

123378176
9895076: RNCC: 3 | RNVC: 9
465-151443.000: RNCC: 5 | RNVC: 9
000-C2-25X2,0X1100-PE-RAL6031: RNCC: 6 | RNVC: 9

18 Apr 1995

5340-12-188-8828
Dust And Moisture Seal Protective Cap

121888828
5400014-1200: RNCC: 2 | RNVC: 2
5400014-1200: RNCC: 5 | RNVC: 9

6 Aug 1981

5340-12-190-6865
Electrical-Mechanical Equipment Post

121906865
VG95148B5XM2X29-ST: RNCC: 2 | RNVC: 2
VG95148B5XM2X29-ST: RNCC: 3 | RNVC: 2
035 6122 127484: RNCC: 5 | RNVC: 9
0356122127484: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-344-4260
Mounting Bracket

123444260
P-296885-007: RNCC: 3 | RNVC: 2
P296885-007: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-318-1282
Mounting Bracket

123181282
5600023-200115.001.0: RNCC: 2 | RNVC: 2
5600023-200115.001.0: RNCC: 3 | RNVC: 2
1519376: RNCC: 5 | RNVC: 2
22012.0.04.106.01: RNCC: 5 | RNVC: 9

14 Jun 1989

5340-12-319-3784
Multiple Angle Bracket

123193784
2782-000020.001.0: RNCC: 2 | RNVC: 2
2782-000020.001.0: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-162-0193
Loop Clamp

121620193
G18TAN15802-0: RNCC: 3 | RNVC: 2
G18TAN15802-3-1364-5: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-197-4207
Spring Tension Clip

121974207
65E8.2-U13: RNCC: 3 | RNVC: 2
65E8-2-U13: RNCC: 5 | RNVC: 2

20 Oct 1983

5340-12-311-5466
Rod End Clevis

123115466
P-245261-702: RNCC: 3 | RNVC: 2
P245261-702: RNCC: 5 | RNVC: 2

16 Sep 1987

5340-12-183-2313
Strap Hinge

121832313
1000093-32270.00.0: RNCC: 2 | RNVC: 2
1000093-32270.00.0: RNCC: 3 | RNVC: 2
1000093-32270-00-0: RNCC: 5 | RNVC: 2
1000093-32270-00-0: RNCC: 5 | RNVC: 9
1000093-32270.00.0: RNCC: 5 | RNVC: 9

28 Mar 1980

5340-12-338-9267
Webbing Strap

123389267
151M-5-N/4500: RNCC: 3 | RNVC: 2
151M-5-N/4500MM: RNCC: 3 | RNVC: 2
151M-5-N/4500MM: RNCC: 5 | RNVC: 9

11 Sep 1995

5340-12-174-2922
Retaining Strap

121742922
23223-060000-02-0: RNCC: 2 | RNVC: 2
23223-060000.02.0: RNCC: 5 | RNVC: 2
23223-060000-02-0: RNCC: 5 | RNVC: 2
23223-060000.02.0: RNCC: 5 | RNVC: 9

21 Jun 1978

5340-12-315-5663
Nonmetallic Bumper

123155663
845-4-0744-087.NR65.ST: RNCC: 3 | RNVC: 2
0744-087: RNCC: 5 | RNVC: 2
0744087: RNCC: 5 | RNVC: 2
4-0744-087: RNCC: 5 | RNVC: 2
8406270: RNCC: 5 | RNVC: 2

9 Nov 1988

5340-12-374-1473
Spacing Threaded Standoff

123741473
VG95148-B5,5XM3X100-9SMNPB28K-A2: RNCC: 2 | RNVC: 2
5.03.991: RNCC: 3 | RNVC: 2

23 Jan 2008

5340-12-177-1425
Retaining Strap

121771425
2300002-052000.008: RNCC: 2 | RNVC: 2
2300002-052000.008: RNCC: 3 | RNVC: 2
2300002-052000-008: RNCC: 5 | RNVC: 9
2300002-052000.008: RNCC: 5 | RNVC: 9

17 Jan 1979

5340-12-371-5672
Dust And Moisture Seal Protective Cap

123715672
68322300: RNCC: 3 | RNVC: 2
81.50810-0003: RNCC: 5 | RNVC: 2
81508100003: RNCC: 5 | RNVC: 2

19 Apr 2007

5340-12-177-7238
Angle Bracket

121777238
2300002-061250.012: RNCC: 2 | RNVC: 2
2300002-061250.012: RNCC: 3 | RNVC: 2
2300002-061250-012: RNCC: 5 | RNVC: 9
2300002-061250.012: RNCC: 5 | RNVC: 9

14 Feb 1979

5340-12-324-9816
Resilient Mount

123249816
DIN95363-A20X20-M8X13-NR55ST: RNCC: 2 | RNVC: 2
500022-M8X13.NR55.ST: RNCC: 5 | RNVC: 2
50009135-1: RNCC: 5 | RNVC: 2
VG95363-A20X20-M8X13-NR55ST: RNCC: 5 | RNVC: 9

17 Apr 1991

5340-12-365-5906
Angle Bracket

123655906
J32420064-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-143-0931
Resilient Mount

121430931
25704-280000.02.0: RNCC: 2 | RNVC: 2
DIN95363-E40X25-M10X12-NR45ST: RNCC: 2 | RNVC: 2
515015-M10X12.NR45.ST: RNCC: 5 | RNVC: 2
845-25704-280000.02.0: RNCC: 5 | RNVC: 2
25704-280000-02-0: RNCC: 5 | RNVC: 2
25704-280000-02-0: RNCC: 5 | RNVC: 9
VG95363-E40X25-M10X12-NR45ST: RNCC: 5 | RNVC: 9
25704-280000.02.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-314-6292
Dust And Moisture Seal Protective Cap

123146292
E3763: RNCC: 3 | RNVC: 2

22 Jul 1988

5340-12-180-0427
Resilient Mount

121800427
3122201717: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-357-2637
Mounting Bracket

123572637
2300013-3372.00: RNCC: 2 | RNVC: 2
2300013-3372.00: RNCC: 3 | RNVC: 2

28 May 2002

5340-12-302-8149
Metal Runner

123028149
178.E57.80: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-310-6203
Access Cover

123106203
52.0258.000.02: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-12-351-1819
Mounting Bracket

123511819
2300387-423020.000: RNCC: 2 | RNVC: 2
9906833: RNCC: 3 | RNVC: 2
2300387-423020.000: RNCC: 5 | RNVC: 9
9906833: RNCC: 5 | RNVC: 9

29 Jun 2000

5340-12-378-3485
Retaining Band

123783485
3133800: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-317-3001
Loop Clamp

123173001
3529950201: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-384-3511
Mounting Bracket

123843511
ME8: RNCC: 3 | RNVC: 2

16 Feb 2011

5340-12-310-6215
Loop Clamp

123106215
52.0259.222.00: RNCC: 3 | RNVC: 2

10 Jun 1987

5340-12-131-5613

5340-12-362-0774
Access Cover

123620774
0211 2453: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-362-7370
Double Angle Bracket

123627370
BD5.250.736.210: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-12-314-4295
Butt Hinge Leaf

123144295
027073010: RNCC: 3 | RNVC: 2

6 Jul 1988

5340-12-312-8510
Helical Compression Spring Retainer

123128510
2300013-9402.02: RNCC: 2 | RNVC: 2
2300013-9402.02: RNCC: 3 | RNVC: 2
2300013-9402.02: RNCC: 5 | RNVC: 9

12 Feb 1988

5340-12-362-7408
Access Cover

123627408
5300.111.010.003: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-12-356-6390
Angle Bracket

123566390
160-62042-70: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-386-7270
Swivel Caster

123867270
LRA-VSTH 35K: RNCC: 3 | RNVC: 2
LRA-VSTH 35K: RNCC: 5 | RNVC: 2

27 Sep 2011

5340-12-392-0258
Bow Handle

123920258
0A-12.120.04: RNCC: 3 | RNVC: 2

26 Apr 2013

5340-12-354-3494
Section Block Clamp

123543494
JN0413CEF52: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-12-339-0305
Mounting Bracket

123390305
05.41.104.01: RNCC: 3 | RNVC: 2
0008630814: RNCC: 3 | RNVC: 2

28 Sep 1995

5340-12-363-2060
Access Cover

123632060
0211 2620: RNCC: 3 | RNVC: 2
0211 1394: RNCC: 5 | RNVC: 9

12 May 2004

5340-12-345-8381
Access Door Hinge

123458381
1039U11: RNCC: 3 | RNVC: 2
0745211009: RNCC: 5 | RNVC: 2

4 May 1998

5340-12-340-8446
Nonmetallic Bumper

123408446
183072306: RNCC: 2 | RNVC: 2
183072306: RNCC: 3 | RNVC: 2
D183072306: RNCC: 5 | RNVC: 2

21 Jun 1996

5340-12-383-9810
Buckle

123839810
S20387-00: RNCC: 3 | RNVC: 2
64000048: RNCC: 5 | RNVC: 2

5 Jan 2011

5340-12-329-7607
Runner

123297607
2300248-81000.01: RNCC: 2 | RNVC: 2
2300248-81000.01: RNCC: 3 | RNVC: 2
2300248-81000.01: RNCC: 5 | RNVC: 2

24 Sep 1992

5340-12-146-5871
Handwheel

121465871
23182-4101.03: RNCC: 2 | RNVC: 2
23182-4101-03: RNCC: 5 | RNVC: 2
23182-4101.03: RNCC: 5 | RNVC: 2
23182-4101-03: RNCC: 5 | RNVC: 9
23182-4101.03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-392-6883
Bail Handle

123926883
S252M3174105: RNCC: 3 | RNVC: 2

28 Jun 2013

5340-12-335-3459
Angle Bracket

123353459
6700018-202500.04: RNCC: 2 | RNVC: 2
6700018-202500.04: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-12-147-1545
Door Button

121471545
2768-037: RNCC: 3 | RNVC: 2
2768037: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-178-8235
Spring Tension Clip

121788235
10477-01: RNCC: 3 | RNVC: 2
477150: RNCC: 5 | RNVC: 2

18 May 1979

5340-12-324-6195
Double Angle Bracket

123246195
2385760002: RNCC: 3 | RNVC: 2
2385760002: RNCC: 5 | RNVC: 2

7 Mar 1991

5340-12-702-5993
Loop Clamp

127025993
VG95211-ML-127025993: RNCC: 2 | RNVC: 2
5150A-12: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-146-7061
Retaining Strap

121467061
TW931-2140-116: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-702-6241
Mounting Bracket

127026241
VG95211-ML-127026241: RNCC: 2 | RNVC: 2
75.5505.65: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-333-2476
Mounting Plate

123332476
26-21C1102G003P15: RNCC: 3 | RNVC: 2

15 Nov 1993

5340-12-169-1374
Screw Hook

121691374
250148-350000-10-0: RNCC: 3 | RNVC: 2

18 Apr 1977

5340-12-332-3845
Nonmetallic Bumper

123323845
160-740807-28: RNCC: 3 | RNVC: 2
160-740807-28: RNCC: 5 | RNVC: 9

5 Aug 1993

5340-12-159-5966
Resilient Mount

121595966
DIN95363-C20X25-NR45ST: RNCC: 2 | RNVC: 2
MM20WEICH: RNCC: 5 | RNVC: 2
1.20.25.2.45NR/ST: RNCC: 5 | RNVC: 2
520013-M6.NR45.ST: RNCC: 5 | RNVC: 2
811.020.020.025.06.NR45.ST: RNCC: 5 | RNVC: 2
81120-20X25-M6.NR45.ST: RNCC: 5 | RNVC: 2
57810540012: RNCC: 5 | RNVC: 2
781054WEICH: RNCC: 5 | RNVC: 2
781054-45SHORE: RNCC: 5 | RNVC: 2
VG95363-C20X25-NR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-162-7845
Loop Clamp

121627845
537M20701: RNCC: 3 | RNVC: 2
537M20701/1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-6801
Angle Bracket

127016801
VG95211-ML-127016801: RNCC: 2 | RNVC: 2
5.12.7213.8040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-094-0958

5340-12-366-2904
Dust And Moisture Seal Protective Plug

123662904
350I51: RNCC: 3 | RNVC: 2
GPN350I51: RNCC: 5 | RNVC: 2

6 Apr 2005

5340-12-326-2080
Double Angle Bracket

123262080
3964290640: RNCC: 3 | RNVC: 2
396 429 06 40: RNCC: 5 | RNVC: 2

16 Aug 1991

5340-12-186-3059
Angle Bracket

121863059
81523400261: RNCC: 3 | RNVC: 2

13 Dec 1980

5340-12-339-0516
Nonmetallic Bumper

123390516
4613230085: RNCC: 3 | RNVC: 2
461323008560: RNCC: 5 | RNVC: 9

4 Oct 1995

5340-12-300-3480
Hinge Torsion Bar

123003480
3097230052: RNCC: 3 | RNVC: 2

26 Jul 1984

5340-12-161-0666
Rod End Connector

121610666
160-28674: RNCC: 3 | RNVC: 2
160-28674: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-377-4212
Butt Hinge

123774212
T311M3045103: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-12-357-5284
Flush Lock

123575284
0007206635: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-377-3171
Spacing Threaded Standoff

123773171
5352030162: RNCC: 3 | RNVC: 2
5362030562 TEIL 5352030162: RNCC: 5 | RNVC: 2

8 Jan 2009

5340-12-316-8296
Mounting Bracket

123168296
2300279-5000.55: RNCC: 2 | RNVC: 2
2300279-5000.55: RNCC: 3 | RNVC: 2
2300279-5000.55: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-339-7217
Retaining Strap

123397217
BSAE009: RNCC: 3 | RNVC: 2

4 Jan 1996

5340-12-184-2336
Mounting Bracket

121842336
211827421: RNCC: 3 | RNVC: 2

8 Jul 1980

5340-12-352-7136
Access Cover

123527136
64416356: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-360-1419
Dust And Moisture Seal Protective Plug

123601419
600B650: RNCC: 3 | RNVC: 2
GPN600B650: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-12-359-6876
Mounting Bracket

123596876
9455280440: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-354-4061
Access Cover

123544061
F03145: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-12-175-7599
Resilient Mount

121757599
331923611: RNCC: 3 | RNVC: 2
331923611: RNCC: 3 | RNVC: 2
331923611: RNCC: 5 | RNVC: 2

16 Oct 1978

5340-12-307-9897
Mending Plate

123079897
P204277710601062: RNCC: 3 | RNVC: 2

15 Aug 1986

5340-12-312-8169
Strap Bolt

123128169
1070337: RNCC: 2 | RNVC: 2
1070337: RNCC: 3 | RNVC: 2

10 Feb 1988

5340-12-379-4379
Angle Bracket

123794379
8372034840: RNCC: 3 | RNVC: 2
15010172: RNCC: 5 | RNVC: 2
8372034840: RNCC: 5 | RNVC: 2

22 Jul 2009

5340-12-340-5455
Angle Bracket

123405455
5900980526: RNCC: 3 | RNVC: 2
5900980526: RNCC: 5 | RNVC: 2
5900980526: RNCC: 5 | RNVC: 2
590 098 05 26: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-152-8278
Casement Fastener

121528278
37317-500: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-331-3560
Mounting Bracket

123313560
81437405141: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-12-322-8648
Angle Bracket

123228648
V731.06.166: RNCC: 3 | RNVC: 2

1 Oct 1990

5340-12-198-4073
Lock-Release Lever

121984073
27 0318 102: RNCC: 2 | RNVC: 2
9859408: RNCC: 3 | RNVC: 9
27 0318 102: RNCC: 5 | RNVC: 2
27 0318 102: RNCC: 5 | RNVC: 9
270318102: RNCC: 5 | RNVC: 9

25 Jan 1984

5340-12-322-8367
Access Cover

123228367
1170601: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-12-166-9102
Angle Bracket

121669102
5800875-5153: RNCC: 3 | RNVC: 2

29 Oct 1976

5340-12-183-2853
Platte

121832853
5801441-30140.01: RNCC: 2 | RNVC: 2
5801441-30140.01: RNCC: 3 | RNVC: 2
5801441-30140-01: RNCC: 5 | RNVC: 2
5801441-30140-01: RNCC: 5 | RNVC: 9
5801441-30140.01: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-12-321-6466
Shimmy Damper

123216466
9852880: RNCC: 3 | RNVC: 2
2300194-180100.009: RNCC: 5 | RNVC: 9
2300194-180100.009: RNCC: 5 | RNVC: 9
9852880: RNCC: 5 | RNVC: 9

12 Jun 1990

5340-12-300-9049
Ball Socket Seat

123009049
DIN71805-A16-A2P: RNCC: 2 | RNVC: 2
DIN71805-A16-A2P: RNCC: 3 | RNVC: 2
071805016102: RNCC: 5 | RNVC: 2
A16DIN71805-A2P: RNCC: 5 | RNVC: 2

11 Sep 1984

5340-12-143-9445
Retaining Strap

121439445
BD90MMN346: RNCC: 3 | RNVC: 2
MMN346-BD90: RNCC: 5 | RNVC: 2
700346090200: RNCC: 5 | RNVC: 2
BD90MMN346: RNCC: 5 | RNVC: 2
MMN346-BD90: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-151-7837
Angle Bracket

121517837
BD7001T426: RNCC: 3 | RNVC: 2
BD7001T426: RNCC: 3 | RNVC: 9
1292001-000145-426: RNCC: 5 | RNVC: 9
1292001-000145.426: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-6254
Nonmetallic Bumper

123216254
VG95092A5X2X15X5-NR60: RNCC: 2 | RNVC: 2
VG95092A5X2X15X5-NR60: RNCC: 3 | RNVC: 2
S168.20: RNCC: 5 | RNVC: 2
62749037: RNCC: 5 | RNVC: 2
168/20: RNCC: 5 | RNVC: 9
2749/037: RNCC: 5 | RNVC: 9

8 Jun 1990

5340-12-182-2238
Angle Bracket

121822238
1200037-15-005: RNCC: 3 | RNVC: 2
1200037-15.005: RNCC: 5 | RNVC: 2

21 Jan 1980

5340-12-313-0924
Electrical-Mechanical Equipment Post

123130924
VG95148B5XM3X20-2.0402.30-E2A: RNCC: 2 | RNVC: 2
VG95148B5XM3X20-2.0402.30-E2A: RNCC: 3 | RNVC: 2
ENMET2-20: RNCC: 3 | RNVC: 2
ENMET2-20 MM: RNCC: 5 | RNVC: 2

3 Mar 1988

5340-12-158-1865
Nonmetallic Bumper

121581865
9GP 851 148-01: RNCC: 3 | RNVC: 2
851148-01: RNCC: 5 | RNVC: 2
9GP851148-00: RNCC: 5 | RNVC: 2
9GP851148-01: RNCC: 5 | RNVC: 2
Z706-01: RNCC: 5 | RNVC: 2
9GP 851 148-01: RNCC: 5 | RNVC: 9
Z706-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-300-0061
Mending Plate

123000061
5801998-663210.08: RNCC: 2 | RNVC: 2
5801998-663210.08: RNCC: 3 | RNVC: 2

21 Jun 1984

5340-12-300-9727
Spring Tension Clip

123009727
021129693A: RNCC: 3 | RNVC: 2

14 Sep 1984

5340-12-393-7239
Mounting Bracket

123937239
47301: RNCC: 3 | RNVC: 2

7 Oct 2013

5340-12-301-5781
Helical Compression Spring Retainer

123015781
4162774: RNCC: 3 | RNVC: 2

25 Oct 1984

5340-12-192-5646
Access Cover

121925646
7820211402: RNCC: 3 | RNVC: 2
78202 11402: RNCC: 5 | RNVC: 9

5 May 1982

5340-12-362-0731
Mounting Plate

123620731
117-84449.01: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-338-2873
Lock-Release Lever

123382873
570564077: RNCC: 3 | RNVC: 2
660640: RNCC: 5 | RNVC: 2

14 Jun 1995

5340-12-333-9116
Angle Bracket

123339116
3226110012: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-12-350-2214
Nonmetallic Bumper

123502214
10063-110200.02: RNCC: 3 | RNVC: 2
10063-110200.02: RNCC: 5 | RNVC: 9

29 Feb 2000

5340-12-300-4215
Mending Plate

123004215
AZ8104T043: RNCC: 3 | RNVC: 2
AZ8104T043: RNCC: 5 | RNVC: 9
AZ8104T043: RNCC: 5 | RNVC: 9

1 Aug 1984

5340-12-042-0305

5340-12-143-8413

5340-12-701-9428
Rod End Clevis

127019428
VG95211-ML-127019428: RNCC: 2 | RNVC: 2
5.12.0246.0019.03: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-358-3160
Flush Bolt

123583160
2500262-191720.004.0: RNCC: 2 | RNVC: 2
2500262-191720.004.0: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-12-344-3996
Double Angle Bracket

123443996
P-296883-204: RNCC: 3 | RNVC: 2
P296883-204: RNCC: 5 | RNVC: 2

23 Oct 1997

5340-12-315-1433
Turnbuckle

123151433
2530006: RNCC: 3 | RNVC: 2
3-2530-006: RNCC: 5 | RNVC: 2
23302-154600: RNCC: 5 | RNVC: 9

22 Sep 1988

5340-12-303-5899
Mending Plate

123035899
704-121400-904-0: RNCC: 3 | RNVC: 2

11 Apr 1985

5340-12-187-5067
Nonmetallic Bumper

121875067
5-612-0729: RNCC: 3 | RNVC: 2

10 Apr 1981

Load More Results