What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 143 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 143 of 178

5340-12-025-9808

5340-12-313-5916
Loop Clamp

123135916
DIN3016-1-D1-15X12-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-15X12-W5: RNCC: 3 | RNVC: 2
RSGU1.15/12-W5: RNCC: 3 | RNVC: 2
26002250570: RNCC: 5 | RNVC: 2
09410712015: RNCC: 5 | RNVC: 2
9410712015: RNCC: 5 | RNVC: 2
RSGU1.15/12-W5: RNCC: 5 | RNVC: 2
Q314176115: RNCC: 5 | RNVC: 2
DIN3016-D1-15X12-W5: RNCC: 5 | RNVC: 9
VG95931-D15X12-W5: RNCC: 5 | RNVC: 9

19 Apr 1988

5340-12-170-3778
Angle Bracket

121703778
81974860196: RNCC: 3 | RNVC: 2
81.97486.0196: RNCC: 5 | RNVC: 2
23250-144617-001-0: RNCC: 5 | RNVC: 9

8 Jul 1977

5340-12-313-0829
Access Cover

123130829
P-896078-001: RNCC: 3 | RNVC: 2
P896078-001: RNCC: 5 | RNVC: 2

3 Mar 1988

5340-12-195-4436
Butt Hinge Leaf

121954436
P-296877-405: RNCC: 3 | RNVC: 2
P296877-405: RNCC: 5 | RNVC: 2

24 Feb 1983

5340-12-329-5278
Loop Clamp

123295278
DIN3016-1-D2-14-14X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-14-14X15-W5: RNCC: 3 | RNVC: 2
RSGU1.2X14/15-W5: RNCC: 3 | RNVC: 2
58R052-151-29: RNCC: 5 | RNVC: 2
DIN3016-D2-14-14X15-W5: RNCC: 5 | RNVC: 9
DIN3016-1-D2-14-14X15-W5: RNCC: 5 | RNVC: 9

27 Aug 1992

5340-12-313-3672
Mounting Bracket

123133672
2300002-181132.000: RNCC: 2 | RNVC: 2
2300002-181132.000: RNCC: 3 | RNVC: 2
2300002-181132.000: RNCC: 5 | RNVC: 2
9830730: RNCC: 5 | RNVC: 9
2300002-181132.000: RNCC: 5 | RNVC: 9
2300002-181132: RNCC: 5 | RNVC: 9
2300002-181132.000: RNCC: 5 | RNVC: 9

25 Mar 1988

5340-12-177-0686
Platte

121770686
2300002-122450.003: RNCC: 2 | RNVC: 2
2300002-122450.003: RNCC: 3 | RNVC: 2
2300002-122450-003: RNCC: 5 | RNVC: 9
2300002-122450.003: RNCC: 5 | RNVC: 9

12 Jan 1979

5340-12-356-7230
Angle Bracket

123567230
6028493: RNCC: 3 | RNVC: 2
6015.127.70.01/029: RNCC: 5 | RNVC: 9

27 Mar 2002

5340-12-332-7642
Mounting Bracket

123327642
537236-0299.000: RNCC: 3 | RNVC: 2
537236-0299.000: RNCC: 5 | RNVC: 9

15 Sep 1993

5340-12-339-7840
Mounting Bracket

123397840
87-401.70-01.00-83: RNCC: 3 | RNVC: 2
87-401.70-01.00-83/3: RNCC: 5 | RNVC: 2

17 Jan 1996

5340-12-703-1087
Pawl Fastener

127031087
VG95211-ML-127031087: RNCC: 2 | RNVC: 2
155N1108-6: RNCC: 3 | RNVC: 2
0500802725649: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-349-9523
Nonmetallic Bumper

123499523
2500238-160210.002.0: RNCC: 2 | RNVC: 2
2500238-160210.002.0: RNCC: 3 | RNVC: 2

28 Jan 2000

5340-12-368-4830
Angle Bracket

123684830
160-714027: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-12-308-9217
Access Cover

123089217
7315 503 153: RNCC: 3 | RNVC: 2
0002650085: RNCC: 5 | RNVC: 2
7315503153: RNCC: 5 | RNVC: 2

27 Nov 1986

5340-12-339-3939
Access Cover

123393939
231.06.06.201: RNCC: 3 | RNVC: 2

20 Nov 1995

5340-12-314-8413
Mounting Bracket

123148413
6250-2071.00.0: RNCC: 2 | RNVC: 2
6250-2071.00.0: RNCC: 3 | RNVC: 2
6250-2071.00.0: RNCC: 5 | RNVC: 9

17 Aug 1988

5340-12-175-3073
Resilient Mount

121753073
V 254-10: RNCC: 3 | RNVC: 2
V254-10: RNCC: 5 | RNVC: 2

6 Sep 1978

5340-12-189-1835
Angle Bracket

121891835
8-3395.00: RNCC: 2 | RNVC: 2
8-3395.00: RNCC: 3 | RNVC: 2
8-3395-00: RNCC: 5 | RNVC: 9
8-3395-00: RNCC: 5 | RNVC: 9
8-3395.00: RNCC: 5 | RNVC: 9

9 Sep 1981

5340-12-702-4476
Mounting Bracket

127024476
VG95211-ML-127024476: RNCC: 2 | RNVC: 2
5.51.0602.0000.11: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-315-7181
Access Cover

123157181
23305-205000.14.0: RNCC: 2 | RNVC: 2
23305-205000.14.0: RNCC: 3 | RNVC: 2

23 Nov 1988

5340-12-331-2408
Bow Handle

123312408
2500253-195000.000.0: RNCC: 2 | RNVC: 2
2500253-195000.000.0: RNCC: 3 | RNVC: 2

6 Apr 1993

5340-12-345-6056
Access Cover

123456056
2500253-190150.006.0: RNCC: 2 | RNVC: 2
2500253-190150.006.0: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-184-6279
Handle Grip

121846279
851-10-2KSZ: RNCC: 3 | RNVC: 2
1301-251.07(5): RNCC: 5 | RNVC: 2

7 Aug 1980

5340-12-341-5972
Bow Handle

123415972
R2-08.120.4: RNCC: 3 | RNVC: 2
2G-2197A-01: RNCC: 5 | RNVC: 2

27 Sep 1996

5340-12-703-1849
Retaining Band

127031849
VG95211-ML-127031849: RNCC: 2 | RNVC: 2
2-300 OST1 10233-71: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-354-9624
Mounting Bracket

123549624
8854 100-221: RNCC: 3 | RNVC: 2

11 Sep 2001

5340-12-188-1300
Spring Tension Clip

121881300
PAN3089-22: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-12-365-5820
Double Angle Bracket

123655820
J28130070-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-379-9756
Mounting Bracket

123799756
2599-23000: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-12-365-8841
Dust And Moisture Seal Protective Plug

123658841
537237-4401.000: RNCC: 3 | RNVC: 2

16 Feb 2005

5340-12-162-4470
Access Cover

121624470
100356-301000-48: RNCC: 2 | RNVC: 2
100356-301000-48: RNCC: 5 | RNVC: 2
100356-301000.48: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-330-9822
Access Door

123309822
2107-110100.15B: RNCC: 2 | RNVC: 2
2107-110100.15B: RNCC: 3 | RNVC: 2

5 Mar 1993

5340-12-346-6691
Expansion Plug

123466691
CDA63-400-47: RNCC: 3 | RNVC: 2

24 Aug 1998

5340-12-326-4246
Metallic Bumper

123264246
30-96205-0002: RNCC: 3 | RNVC: 2
05100-50261: RNCC: 5 | RNVC: 2
V1 791-A02: RNCC: 5 | RNVC: 2
VI 791-A02: RNCC: 5 | RNVC: 2

13 Sep 1991

5340-12-334-8234
Sliding Stay

123348234
600857149: RNCC: 3 | RNVC: 2
81.61413-0014: RNCC: 5 | RNVC: 2
81614130014: RNCC: 5 | RNVC: 2

23 Jun 1994

5340-12-701-7331
Mounting Plate

127017331
VG95211-ML-127017331: RNCC: 2 | RNVC: 2
5.12.7608.2171.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-316-0191
Electrical-Mechanical Equipment Post

123160191
C22121-A143-C1: RNCC: 3 | RNVC: 2

15 Dec 1988

5340-12-324-4016
Retaining Strap

123244016
4860-10: RNCC: 3 | RNVC: 2

13 Feb 1991

5340-12-155-6445
Retaining Strap

121556445
160-77880-01: RNCC: 3 | RNVC: 2
160-77880-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-368-7655
Bow Handle

123687655
81970015082: RNCC: 3 | RNVC: 2
81.97001-5082: RNCC: 5 | RNVC: 2

13 Apr 2006

5340-12-350-4458
Block Clamp

123504458
J29120352-401: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-311-0608
Folding Stay

123110608
5802284-121131: RNCC: 2 | RNVC: 2
4312 711 35260: RNCC: 3 | RNVC: 2
4312 711 3526E: RNCC: 5 | RNVC: 2

22 Jul 1987

5340-12-123-4594
Loop Clamp

121234594
51974010022: RNCC: 3 | RNVC: 2
00.00430-9726: RNCC: 5 | RNVC: 2
00004309726: RNCC: 5 | RNVC: 2
R9726: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-317-3441
Mounting Bracket

123173441
4200077-110: RNCC: 2 | RNVC: 2

30 Mar 1989

5340-12-177-8932
Mounting Bracket

121778932
2300002-065119.001: RNCC: 2 | RNVC: 2
2300002-065119.001: RNCC: 3 | RNVC: 2
2300002-065119-001: RNCC: 5 | RNVC: 9
2300002-065119.001: RNCC: 5 | RNVC: 9

7 Mar 1979

5340-12-338-7272
Butt Hinge Leaf

123387272
6700017-202910.00: RNCC: 2 | RNVC: 2
6700017-202910.00: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-12-358-7092
Swivel Caster

123587092
2719-514200.007.0: RNCC: 2 | RNVC: 2
2719-514200.007.0: RNCC: 3 | RNVC: 2

7 Nov 2002

5340-12-366-3321
Mounting Plate

123663321
P-085065-751: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-12-349-8828
Support Hook

123498828
VG95211-ML-123498828: RNCC: 2 | RNVC: 2
V6520-10001-101: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-356-2368
Mounting Bracket

123562368
ED41-0900-00215-128: RNCC: 2 | RNVC: 2
ED41-0900-00215-128: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-365-6351
Angle Bracket

123656351
J92228295-001: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-335-5394
Mending Plate

123355394
347-153-027: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-12-155-2384
Butt Hinge Leaf

121552384
160-26762-08: RNCC: 3 | RNVC: 2
160-26762-08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-331-9805
Angle Bracket

123319805
160-74328-08: RNCC: 3 | RNVC: 2
160-74328-08: RNCC: 5 | RNVC: 9

13 Jul 1993

5340-12-359-4395
Loop Clamp

123594395
DIN3016-1-D1-8X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-321-1517
Mending Plate

123211517
2782-191060.001.0: RNCC: 2 | RNVC: 2
2782-191060.001.0: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-12-702-5234
Mounting Bracket

127025234
VG95211-ML-127025234: RNCC: 2 | RNVC: 2
5.51.7010.0150.07: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-2497
Retaining Strap

127022497
VG95211-ML-127022497: RNCC: 2 | RNVC: 2
30.9205.14: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-1266
Angle Bracket

127021266
VG95211-ML-127021266: RNCC: 2 | RNVC: 2
30.5811.80: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-195-3952
Butt Hinge Leaf

121953952
2500067-101433.00: RNCC: 2 | RNVC: 2
2500067-101433.00: RNCC: 3 | RNVC: 2

21 Feb 1983

5340-12-091-4488

5340-12-384-5947
Loop Clamp

123845947
1685700143: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-12-388-6002
Mounting Plate

123886002
122W161100.001.0: RNCC: 2 | RNVC: 2
122W161100.001.0: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-12-387-3557
Mounting Plate

123873557
5241530540: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-12-350-0075
Flush Lock

123500075
81626806114: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-147-9148
Bridge Clamp

121479148
258563J: RNCC: 3 | RNVC: 2
0331 7930: RNCC: 3 | RNVC: 2
3317930EC0152-46: RNCC: 5 | RNVC: 2
3317930: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-357-3350
Loop Clamp

123573350
5583024: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-12-356-4679
Angle Bracket

123564679
7802499822: RNCC: 3 | RNVC: 2
78024 99822: RNCC: 5 | RNVC: 9

4 Mar 2002

5340-12-357-1735
Mechanical Stop

123571735
8812370147: RNCC: 2 | RNVC: 2
8812370147: RNCC: 3 | RNVC: 2

15 May 2002

5340-12-315-8276
Mounting Bracket

123158276
54.0026.040.11: RNCC: 3 | RNVC: 2
54002604011: RNCC: 5 | RNVC: 2

30 Nov 1988

5340-12-362-6287
Mounting Bracket

123626287
1216 2534: RNCC: 3 | RNVC: 2
12162534: RNCC: 5 | RNVC: 2

12 Mar 2004

5340-12-302-1422
Nonmetallic Bumper

123021422
323946: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-364-5234
Fuehrungs- Schiene

123645234
54.1105.195.00: RNCC: 3 | RNVC: 2

6 Oct 2004

5340-12-189-9264
Bow Handle

121899264
633 500: RNCC: 3 | RNVC: 2
633500: RNCC: 5 | RNVC: 2

27 Oct 1981

5340-12-349-8816
Butt Hinge

123498816
1054201: RNCC: 3 | RNVC: 2
16CZ-50X50-LINKS: RNCC: 5 | RNVC: 2

20 Jan 2000

5340-12-126-0302

5340-12-303-4483
Mending Plate

123034483
2452917: RNCC: 3 | RNVC: 2
2174111: RNCC: 5 | RNVC: 2

22 Mar 1985

5340-12-126-0308

5340-12-128-0039

5340-12-148-4697

5340-12-348-9171
Extension Drawer Slide

123489171
17119: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-365-1252
Webbing Strap

123651252
4618980477: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-393-2199
Wearo Insert Piece

123932199
04361I: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-12-320-5988
Strap Hinge Leaf

123205988
100330-2500.11: RNCC: 2 | RNVC: 2
1064849: RNCC: 3 | RNVC: 2
100330-2500.11: RNCC: 5 | RNVC: 9
1064849: RNCC: 5 | RNVC: 9

30 Jan 1990

5340-12-198-1825
Electrical-Mechanical Equipment Post

121981825
VG95148B5,5XM3X47-AL-1101: RNCC: 2 | RNVC: 2
5801411-33111.002: RNCC: 3 | RNVC: 2
VG95148B5,5XM3X47-AL-1101: RNCC: 3 | RNVC: 2
5801411-33111.002: RNCC: 5 | RNVC: 9

28 Dec 1983

5340-12-393-5202
Retaining Strap

123935202
06.66040-0107: RNCC: 3 | RNVC: 2
06.66040-0107: RNCC: 5 | RNVC: 2

20 Sep 2013

5340-12-361-5317
Sealing Plug Assembly

123615317
TL4240-0064-44: RNCC: 2 | RNVC: 2
R55189: RNCC: 3 | RNVC: 2
DGY2034010: RNCC: 3 | RNVC: 2
4200-278-7100: RNCC: 5 | RNVC: 9

14 Oct 2003

5340-12-198-7214
Spring Tension Clip

121987214
5801998-410000.11: RNCC: 2 | RNVC: 2
5801998-410000.11: RNCC: 3 | RNVC: 2

22 Feb 1984

5340-12-174-2498
Electrical-Mechanical Equipment Post

121742498
900B5016-000-01: RNCC: 3 | RNVC: 2
F01-174: RNCC: 5 | RNVC: 2

19 Jun 1978

5340-12-344-9110
Kunst Gleitschiene

123449110
U15.151000.01-00: RNCC: 3 | RNVC: 2

12 Jan 1998

5340-12-368-7891
Handle Grip

123687891
1095-07: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-12-702-7219
Retaining Strap

127027219
40-13706616672: RNCC: 2 | RNVC: 2

7 Dec 1995

5340-12-701-1184
Loop Clamp

127011184
VG95211-ML-127011184: RNCC: 2 | RNVC: 2
4728A-16-20: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-315-4548
Metal Runner

123154548
510252-0001.000: RNCC: 3 | RNVC: 2
510252-0001: RNCC: 5 | RNVC: 2

26 Oct 1988

5340-12-339-7905
Nonmetallic Bumper

123397905
2654-331550.00: RNCC: 2 | RNVC: 2
2654-331550.00: RNCC: 3 | RNVC: 2
K6101-1000.00: RNCC: 3 | RNVC: 2
2654-331 550.00: RNCC: 5 | RNVC: 9
2654-331 550.00: RNCC: 5 | RNVC: 9
K6101-1000.00: RNCC: 5 | RNVC: 9
2654-331 550.00: RNCC: 5 | RNVC: 9

18 Jan 1996

5340-12-326-5315
Mounting Bracket

123265315
4900346-010600.00: RNCC: 2 | RNVC: 2
4900346-010600.00: RNCC: 3 | RNVC: 2

1 Oct 1991

5340-12-146-6288
Retaining Strap

121466288
23114-0800.11: RNCC: 2 | RNVC: 2
23114-0800-11: RNCC: 3 | RNVC: 2
23114-0800-11: RNCC: 5 | RNVC: 9
23114-0800-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-134-1048
Retaining Strap

121341048
F5167-29-06-21: RNCC: 3 | RNVC: 2
5167-29-06-21: RNCC: 5 | RNVC: 2
5167-29-06.21: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-184-9562
Retaining Strap

121849562
2300031-820000.11: RNCC: 2 | RNVC: 2
2300031-820000-11: RNCC: 5 | RNVC: 9

28 Aug 1980

5340-12-332-0740
Loop Clamp

123320740
LM-100/44: RNCC: 3 | RNVC: 2
2125.001-44: RNCC: 5 | RNVC: 2
2125.001-44: RNCC: 5 | RNVC: 2

20 Jul 1993

5340-12-300-2847
Retaining Strap

123002847
23114-2405.85: RNCC: 2 | RNVC: 2
23114-2405.85: RNCC: 3 | RNVC: 2
23114-2405-85: RNCC: 5 | RNVC: 9
23114-2405.85: RNCC: 5 | RNVC: 9
23114-2405-85: RNCC: 5 | RNVC: 9

20 Jul 1984

5340-12-387-3896
Loop Clamp

123873896
0005334743: RNCC: 3 | RNVC: 2
0005334843: RNCC: 5 | RNVC: 2
K4/922-0162-001: RNCC: 5 | RNVC: 2

8 Dec 2011

5340-12-370-1396
Mounting Plate

123701396
865344322: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-12-315-4041
Dust And Moisture Seal Protective Plug

123154041
1460516001: RNCC: 3 | RNVC: 2
1460516001: RNCC: 3 | RNVC: 2
1 460 516 001: RNCC: 5 | RNVC: 2
1460516001: RNCC: 5 | RNVC: 2
1460591001: RNCC: 5 | RNVC: 9

19 Oct 1988

5340-12-161-9433
Spring Tension Clip

121619433
1213-110-21: RNCC: 3 | RNVC: 2
1213-110-21: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-343-0185
Mounting Bracket

123430185
5084-244: RNCC: 3 | RNVC: 2

22 Apr 1997

5340-12-390-7999
Multiple Angle Bracket

123907999
601215-202200.02: RNCC: 3 | RNVC: 2

12 Dec 2012

5340-12-321-1021
Mounting Bracket

123211021
5803576-201800.01: RNCC: 2 | RNVC: 2
5803576-201800.01: RNCC: 3 | RNVC: 2
5803576-201800.01: RNCC: 5 | RNVC: 9

27 Mar 1990

5340-12-344-8899
Resilient Mount

123448899
B100X60-M16X42-60SH-EPDM: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-12-365-5875
Double Angle Bracket

123655875
J32320042-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-350-3835
Section Block Clamp

123503835
J29120344-003: RNCC: 3 | RNVC: 2

23 Mar 2000

5340-12-171-7698
Nonmetallic Bumper

121717698
490127-32001-10: RNCC: 3 | RNVC: 2
898119: RNCC: 5 | RNVC: 2

11 Nov 1977

5340-12-342-8706
Resilient Mount

123428706
5017-198: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-12-199-6711
Angle Bracket

121996711
03436551: RNCC: 3 | RNVC: 2
0343 6551: RNCC: 5 | RNVC: 2
3436551EZ5071-01: RNCC: 5 | RNVC: 2
D5179-01-49.11: RNCC: 5 | RNVC: 2

19 May 1984

5340-12-408-7189

5340-12-397-6132

5340-12-311-2200
Spring Tension Clip

123112200
52067-001: RNCC: 3 | RNVC: 2
52 067-001: RNCC: 5 | RNVC: 9

6 Aug 1987

5340-12-352-4197
Bow Handle

123524197
GN528-PA-132-SW: RNCC: 3 | RNVC: 2

17 Nov 2000

5340-12-702-3796
Rod End Connector

127023796
VG95211-ML-127023796: RNCC: 2 | RNVC: 2
5.12.5101.4930.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-8476
Loop Clamp

127018476
VG95211-ML-127018476: RNCC: 2 | RNVC: 2
5159A-10-1: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-171-0836
Butt Hinge

121710836
81.97201.6011: RNCC: 3 | RNVC: 2
1218 142 0: RNCC: 3 | RNVC: 2
9239: RNCC: 5 | RNVC: 2
81.97201.6019: RNCC: 5 | RNVC: 2
81972016011: RNCC: 5 | RNVC: 2
81.97201-6019: RNCC: 5 | RNVC: 9
81.97201-6011: RNCC: 5 | RNVC: 9
81972016019: RNCC: 5 | RNVC: 9

7 Sep 1977

5340-12-174-2229
Mending Plate

121742229
23223-063510-01-0: RNCC: 2 | RNVC: 2
23223-063510-01-0: RNCC: 5 | RNVC: 2
23223-063510.01.0: RNCC: 5 | RNVC: 2
23223-063510.01.0: RNCC: 5 | RNVC: 9

15 Jun 1978

5340-12-194-5500
Manual Control Handle

121945500
GN310-10-100-A: RNCC: 3 | RNVC: 2
A10X100GN310: RNCC: 5 | RNVC: 2
A10X100GN310: RNCC: 5 | RNVC: 2

15 Nov 1982

5340-12-701-3919
Loop Clamp

127013919
VG95211-ML-127013919: RNCC: 2 | RNVC: 2
5.12.5311.1000.42: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-327-8806
Double Angle Bracket

123278806
105-072-013-3: RNCC: 3 | RNVC: 2

17 Mar 1992

5340-12-385-9459
Manual Control Lever

123859459
2481-395921.001.0: RNCC: 3 | RNVC: 2

25 Jul 2011

5340-12-386-0282
Retaining Clip

123860282
P-568: RNCC: 3 | RNVC: 2
0059889678: RNCC: 5 | RNVC: 2
0059889678: RNCC: 5 | RNVC: 2

2 Aug 2011

5340-12-379-3320
Webbing Strap

123793320
2300495-970145.000.0: RNCC: 3 | RNVC: 2

14 Jul 2009

5340-12-391-4292
Access Cover

123914292
I010003TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-011-5761

5340-12-311-0983
Access Cover

123110983
5801357-2110.01: RNCC: 2 | RNVC: 2
5801357-2110.01: RNCC: 3 | RNVC: 2
5801357-2110.01: RNCC: 5 | RNVC: 9

27 Jul 1987

5340-12-320-0294
Bridge Clamp

123200294
0240 4776: RNCC: 3 | RNVC: 2
2404776: RNCC: 5 | RNVC: 2
2404776EE0144-20: RNCC: 5 | RNVC: 2

29 Nov 1989

5340-12-702-0040
Loop Clamp

127020040
VG95211-ML-127020040: RNCC: 2 | RNVC: 2
1667S50-55: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-304-4145
Angle Bracket

123044145
2500093-1200.19: RNCC: 2 | RNVC: 2
2500093-1200.19: RNCC: 3 | RNVC: 2
2500093-1200.19: RNCC: 5 | RNVC: 9

16 Jul 1985

5340-12-318-7655
Mending Plate

123187655
704-126300-906-0: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-12-344-5900
Butt Hinge Leaf

123445900
J5282006-003: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-12-384-9288
Detent Plunger

123849288
210724: RNCC: 3 | RNVC: 2
93585-100.38: RNCC: 5 | RNVC: 2
10341898: RNCC: 6 | RNVC: 9

11 Apr 2011

5340-12-356-4121
Door Button

123564121
J04020000-061: RNCC: 3 | RNVC: 2

26 Feb 2002

5340-12-358-0302
Double Angle Bracket

123580302
J28230179-006: RNCC: 3 | RNVC: 2
008692345: RNCC: 5 | RNVC: 2

4 Sep 2002

5340-12-358-9514
Webbing Strap

123589514
1-420.6000/31: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-340-2896
Elastic Strap

123402896
2300298-972072.000.0: RNCC: 2 | RNVC: 2
82300-2300298-972072.000.0: RNCC: 3 | RNVC: 2
2300298-972072.000.0: RNCC: 3 | RNVC: 2
82300-C380X30-NBR-ST-SW: RNCC: 6 | RNVC: 9

21 Mar 1996

5340-12-317-8260
Mending Plate

123178260
23290-041000.013: RNCC: 2 | RNVC: 2
23290-041000.013: RNCC: 3 | RNVC: 2
23290-041000.013: RNCC: 5 | RNVC: 9
9858789: RNCC: 5 | RNVC: 9

17 May 1989

5340-12-185-5166
Tee Hinge

121855166
HRS4480-20: RNCC: 3 | RNVC: 2
HRS4480-20: RNCC: 5 | RNVC: 9

11 Oct 1980

5340-12-319-5280
Bridge Clamp

123195280
504292: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-12-374-2663
Manual Control Lever

123742663
L521M1059216: RNCC: 3 | RNVC: 2

1 Feb 2008

5340-12-340-4781
Elastic Strap

123404781
P20560: RNCC: 3 | RNVC: 2

20 Apr 1996

5340-12-343-8054
Retaining Strap

123438054
DSBC035: RNCC: 3 | RNVC: 2

30 Jul 1997

5340-12-135-6516

5340-12-322-8131
Mounting Plate

123228131
4666901: RNCC: 3 | RNVC: 2

25 Sep 1990

5340-12-301-1410
Flush Lock

123011410
251843604: RNCC: 3 | RNVC: 9

22 Sep 1984

5340-12-359-8311
Verriegelun Buegel

123598311
2500262-190000.022.0: RNCC: 2 | RNVC: 2
2500262-190000.022.0: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-123-2824
Spring Tension Clip

121232824
01236768: RNCC: 3 | RNVC: 2
03348692: RNCC: 5 | RNVC: 2
33074132: RNCC: 5 | RNVC: 2
3348692EE5052-81: RNCC: 5 | RNVC: 2
N92034N: RNCC: 5 | RNVC: 2
168092103: RNCC: 5 | RNVC: 2
1236768EE8928-80: RNCC: 5 | RNVC: 9
N92034N: RNCC: 5 | RNVC: 9
01236768: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-7667
Angle Bracket

123027667
272.1430.11-09: RNCC: 3 | RNVC: 2

29 Jan 1985

5340-12-161-0409
Spring Tension Clip

121610409
160-24576-114: RNCC: 3 | RNVC: 2
160-24576-114: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-348-9095
Mechanical Stop

123489095
245/7383-02-00-36: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-323-7410
Clamping Catch

123237410
DIN3133-D105-K25X83ZN8: RNCC: 2 | RNVC: 2
77D-GZ-ZN8: RNCC: 3 | RNVC: 2
77D: RNCC: 5 | RNVC: 2

12 Dec 1990

5340-12-302-0023
Mending Plate

123020023
1300061-120200.03: RNCC: 2 | RNVC: 2
7834832: RNCC: 3 | RNVC: 2
1300061-120200.03: RNCC: 5 | RNVC: 2
4-7834-832: RNCC: 5 | RNVC: 2
7834-832: RNCC: 5 | RNVC: 2
1300061-120200-03: RNCC: 5 | RNVC: 9
1300061-120200.03: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-12-158-7162
Mending Plate

121587162
23305-180000.02.0: RNCC: 2 | RNVC: 2
23305-180000.02.0: RNCC: 3 | RNVC: 2
23305-180000-02-0: RNCC: 5 | RNVC: 2
23305-180000-02-0: RNCC: 5 | RNVC: 9
23305-180000.02.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-149-8377
Resilient Mount

121498377
DIN95363-C10X15-M3-NR45ST: RNCC: 2 | RNVC: 2
5LV6679-088-81: RNCC: 5 | RNVC: 2
520004-M3-NR45.ST: RNCC: 5 | RNVC: 2
10-0200-88-81-9: RNCC: 5 | RNVC: 2
5L6679-088-81: RNCC: 5 | RNVC: 2
AB3-02-24N: RNCC: 5 | RNVC: 9
AB3-02-280: RNCC: 5 | RNVC: 9
W622: RNCC: 5 | RNVC: 9
VG95363-C10X15-M3-NR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-1801
Nonmetallic Bumper

123171801
59007401: RNCC: 3 | RNVC: 2
GF46/79 QUALITAET4085: RNCC: 3 | RNVC: 2
4603170512: RNCC: 5 | RNVC: 2
85.105.FGF.1B.3: RNCC: 5 | RNVC: 2

16 Mar 1989

5340-12-317-4197
Angle Bracket

123174197
P-145502-021: RNCC: 3 | RNVC: 2
P145502-021: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-315-3590
Mounting Bracket

123153590
1000173-190310.000.0: RNCC: 2 | RNVC: 2
1000173-190310.000.0: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-12-300-9178
Angle Bracket

123009178
1423-320.08(4): RNCC: 3 | RNVC: 2

12 Sep 1984

5340-12-330-3921
Mounting Plate

123303921
6600153-982200.001.0: RNCC: 2 | RNVC: 2
6600153-982200.001.0: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-12-317-6801
Retaining Strap

123176801
1000173-380000.004.0: RNCC: 2 | RNVC: 2
1000173-380000.004.0: RNCC: 3 | RNVC: 2

28 Apr 1989

5340-12-388-3853
Roller Holder

123883853
122W168500.000.0: RNCC: 2 | RNVC: 2
122W168500.000.0: RNCC: 3 | RNVC: 2

16 Mar 2012

5340-12-333-4147
Lock-Release Lever

123334147
136-781234-A: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-168-2376
Mending Plate

121682376
WW410260A: RNCC: 3 | RNVC: 2
WW410260A: RNCC: 5 | RNVC: 2
WW 410 260 A: RNCC: 5 | RNVC: 2
WW410260A: RNCC: 5 | RNVC: 2

28 Feb 1977

5340-12-194-6009
Sealing Plug Assembly

121946009
0019973286: RNCC: 3 | RNVC: 2
721 1 99 066 1: RNCC: 5 | RNVC: 9

23 Nov 1982

5340-12-356-5648
Dust And Moisture Seal Protective Cap

123565648
SZ08-6-SW001A1: RNCC: 3 | RNVC: 2
SZ08-6-SW001: RNCC: 5 | RNVC: 2

12 Mar 2002

5340-12-700-9139
Rod End Clevis

127009139
VG95211-ML-127009139: RNCC: 2 | RNVC: 2
2.24.5101.0220.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-146-8942
Mending Plate

121468942
2360-182120.10.0: RNCC: 2 | RNVC: 2
2360-182120.10.0: RNCC: 3 | RNVC: 2
2360-182120-10-0: RNCC: 5 | RNVC: 2
2360-182120.10.0: RNCC: 5 | RNVC: 2
2360-182120-10-0: RNCC: 5 | RNVC: 9
2360-182120.10.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-6767
Angle Bracket

123596767
2500261-187010.002.0: RNCC: 2 | RNVC: 2
2500261-187010.002.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-702-0199
Angle Bracket

127020199
VG95211-ML-127020199: RNCC: 2 | RNVC: 2
200N106-1: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-9475
Angle Bracket

123079475
8-9895.03: RNCC: 2 | RNVC: 2
8-9895.03: RNCC: 3 | RNVC: 2
8-9895.03: RNCC: 5 | RNVC: 9
9855413: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-197-9411
Electrical-Mechanical Equipment Post

121979411
E4782-02-2: RNCC: 3 | RNVC: 2

2 Dec 1983

5340-12-361-3686
Loop Clamp

123613686
DIN3016-1-D1-5X15-W1-2-EPDM: RNCC: 2 | RNVC: 2
06.67300-0526: RNCC: 5 | RNVC: 2
06673000526: RNCC: 5 | RNVC: 2

19 Sep 2003

5340-12-356-9384
Mounting Plate

123569384
4139162: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-12-377-4293
Retaining Clip

123774293
10018547: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-12-393-0082
Double Angle Bracket

123930082
868234304: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-148-3720
Resilient Mount

121483720
80707001: RNCC: 3 | RNVC: 2
410-314-B-00.07: RNCC: 3 | RNVC: 2
410-314-B-00.07: RNCC: 5 | RNVC: 2
410-314B0007: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-344-2353
Access Cover

123442353
5561420156: RNCC: 3 | RNVC: 2
556 142 01 56: RNCC: 5 | RNVC: 2

6 Oct 1997

5340-12-359-3461
Lock-Release Lever

123593461
866401904: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-385-0537
Mounting Plate

123850537
864064006: RNCC: 3 | RNVC: 2

26 Apr 2011

5340-12-328-9146
Nonmetallic Bumper

123289146
2350-011610.002.0: RNCC: 2 | RNVC: 2
2350-011610-002.0: RNCC: 3 | RNVC: 2
2350-011610.002.0: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-398-2469

5340-12-188-2521
Retaining Strap

121882521
2300028-6000.001: RNCC: 2 | RNVC: 2
2300028-6000-001: RNCC: 5 | RNVC: 2
2300028-6000.001: RNCC: 5 | RNVC: 2
2300028-6000-001: RNCC: 5 | RNVC: 9

22 Jun 1981

5340-12-309-2992
Electrical-Mechanical Equipment Post

123092992
0B846.91-10-22-00-007: RNCC: 3 | RNVC: 2
0A846.91-10-22-00-007: RNCC: 5 | RNVC: 9

13 Jan 1987

5340-12-199-7404
Webbing Strap

121997404
2500138-190200.09: RNCC: 2 | RNVC: 2
2500138-190200.09: RNCC: 5 | RNVC: 9

26 May 1984

5340-12-163-0628
Resilient Mount

121630628
DIN95363-B25X15-M6X10-NBR45ST: RNCC: 2 | RNVC: 2
5902230065: RNCC: 5 | RNVC: 2
5902230065: RNCC: 5 | RNVC: 2
510020-M6X10.NBR45.ST: RNCC: 5 | RNVC: 2
5902230065: RNCC: 5 | RNVC: 2
VG95363-B25X15-M6X10-NBR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-165-1711
Compression Cup

121651711
H12-16-90NBR/108: RNCC: 3 | RNVC: 2
H12-16-90NBR108: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-198-0585
Loop Clamp

121980585
537171-3057.000: RNCC: 3 | RNVC: 2
53 71 71-3057: RNCC: 5 | RNVC: 9
53 71 71-3057: RNCC: 5 | RNVC: 9
537171-3057: RNCC: 5 | RNVC: 9
537171-3057.000: RNCC: 5 | RNVC: 9

15 Dec 1983

5340-12-145-5863
Resilient Mount

121455863
DIN95363-B50X40-M10X20-NR60ST: RNCC: 2 | RNVC: 2
23114-5000.08: RNCC: 2 | RNVC: 2
23114-5000-08: RNCC: 5 | RNVC: 2
81110-50X40-M10X20.NR60.ST: RNCC: 5 | RNVC: 2
23114-5000-08: RNCC: 5 | RNVC: 9
23114-5000-08: RNCC: 5 | RNVC: 9
23114-5000-08: RNCC: 5 | RNVC: 9
VG95363-B50X40-M10X20-NR60ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-336-6064
Mounting Bracket

123366064
1000232-01-02-02-00-003: RNCC: 2 | RNVC: 2
1000232-01-02-02-00-003: RNCC: 5 | RNVC: 2

30 Nov 1994

5340-12-124-0814
Buckle

121240814
DIN5291-16-ST-VERZINKT: RNCC: 2 | RNVC: 2
16DIN5291STVERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-393-0834
Rigid Caster

123930834
BO-ALST160K: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-12-197-2197
Dust And Moisture Seal Protective Cap-Plug

121972197
610U14RAL3000: RNCC: 3 | RNVC: 2
610001400 FEUERROT WIE RAL3000: RNCC: 5 | RNVC: 9
610001420: RNCC: 5 | RNVC: 9
610U14 ROT: RNCC: 5 | RNVC: 9
610U14ROT: RNCC: 5 | RNVC: 9
GPN610,U14,ROT: RNCC: 5 | RNVC: 9
GPN610,U14-RAL3000: RNCC: 5 | RNVC: 9
GPN610-U14RAL3000: RNCC: 5 | RNVC: 9
GPN610U14RGE: RNCC: 5 | RNVC: 9

3 Oct 1983

5340-12-351-7621
Dust And Moisture Seal Protective Plug

123517621
EN3789-08: RNCC: 2 | RNVC: 2

21 Aug 2000

5340-12-174-6741
Mending Plate

121746741
65-7058-617-01: RNCC: 3 | RNVC: 2

19 Jul 1978

5340-12-309-9985
Dust And Moisture Seal Protective Cap

123099985
A13X12,1-N13018-MS: RNCC: 3 | RNVC: 2
913018013101: RNCC: 5 | RNVC: 2

26 Mar 1987

5340-12-303-3064
Angle Bracket

123033064
P-875292-403: RNCC: 3 | RNVC: 2
P875292-403: RNCC: 5 | RNVC: 2

13 Mar 1985

5340-12-189-4564
Resilient Mount Plate

121894564
E1D 2253-01: RNCC: 3 | RNVC: 2
E1D2253-01: RNCC: 5 | RNVC: 2
2242051017: RNCC: 5 | RNVC: 2
22420 51017: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-12-355-0337
Mending Plate

123550337
P-876017-005: RNCC: 3 | RNVC: 2
P876017-005: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-12-197-7697
Mending Plate

121977697
A-145401-050: RNCC: 3 | RNVC: 2
A145401-050: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-313-0205
Double Angle Bracket

123130205
P-086149-015: RNCC: 3 | RNVC: 2
P086149-015: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-331-9606
Webbing Strap

123319606
01802-1-2500MM: RNCC: 3 | RNVC: 2
01802-1-L=2500: RNCC: 5 | RNVC: 2
01802-1-2500: RNCC: 5 | RNVC: 2
79036-2500: RNCC: 5 | RNVC: 2
DIN60060-1-25X2500-C1: RNCC: 5 | RNVC: 9

9 Jul 1993

5340-12-333-5313
Webbing Strap

123335313
01155-2-SCHLAUFE-FE100MM-LE450MM: RNCC: 3 | RNVC: 2
01155-2-FE=100-LE=450: RNCC: 5 | RNVC: 2
01155-2-SCHLAUFE-FE100-LE450: RNCC: 5 | RNVC: 2
79057/SCHLAUFE-550-100: RNCC: 5 | RNVC: 2
DIN60060-2-25X100X450-C3/SCHLAUF: RNCC: 5 | RNVC: 9

3 Jan 1994

5340-12-329-6180
Quick Release Plunger

123296180
GN616-M16-S: RNCC: 3 | RNVC: 2
03040-16: RNCC: 3 | RNVC: 2
AM16HWN206I: RNCC: 3 | RNVC: 2
1616001: RNCC: 3 | RNVC: 2
RBN410.2-M16: RNCC: 3 | RNVC: 2
NLM304-16: RNCC: 5 | RNVC: 9
NLM3040-16: RNCC: 5 | RNVC: 9

9 Sep 1992

5340-12-196-0477
Verbindungsstueck

121960477
65.082: RNCC: 3 | RNVC: 2
3/3-720: RNCC: 5 | RNVC: 2
65082: RNCC: 5 | RNVC: 2
65.066: RNCC: 5 | RNVC: 9
65.090: RNCC: 5 | RNVC: 9
65066: RNCC: 5 | RNVC: 9
65090: RNCC: 5 | RNVC: 9

24 May 1983

5340-12-188-8689
Dust And Moisture Seal Protective Plug

121888689
0637 510 336: RNCC: 3 | RNVC: 2
41-4911-2300-0: RNCC: 5 | RNVC: 9
12,5ATE N 144 90: RNCC: 5 | RNVC: 9
41491123000: RNCC: 5 | RNVC: 9
41.4911-2300.0: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-12-306-0811
Mending Plate

123060811
P-243852-018: RNCC: 3 | RNVC: 2
P243852-018: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-313-0198
Double Angle Bracket

123130198
P-086149-005: RNCC: 3 | RNVC: 2
P086149-005: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-365-2748
Access Cover

123652748
101296: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-393-7395
Mounting Actuator Plate

123937395
G36492: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-12-027-6878

5340-12-391-6635
Turnbuckle

123916635
M5537090315600: RNCC: 3 | RNVC: 2

26 Mar 2013

5340-12-344-1922
Angle Bracket

123441922
2300387-250700.003: RNCC: 2 | RNVC: 2
2300387-250700.003: RNCC: 3 | RNVC: 2
9910004: RNCC: 5 | RNVC: 9
2300387-250700.003: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-12-393-5723
Angle Bracket

123935723
4374290740: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-361-4325
Mounting Plate

123614325
30564: RNCC: 3 | RNVC: 2
30564: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-12-366-1612
Flush Lock

123661612
101908: RNCC: 3 | RNVC: 2

16 Mar 2005

5340-12-180-6315
Spring Tension Clip

121806315
4258140132: RNCC: 3 | RNVC: 2

24 Sep 1979

5340-12-175-6007
Ball Socket Seat

121756007
183407379: RNCC: 3 | RNVC: 2

4 Oct 1978

5340-12-335-2129
Mending Plate

123352129
0048-200000A21B: RNCC: 2 | RNVC: 2
0048-200000A21B: RNCC: 3 | RNVC: 2

27 Jul 1994

5340-12-316-2010
Mounting Bracket

123162010
3875211740: RNCC: 3 | RNVC: 2
387 521 17 40: RNCC: 5 | RNVC: 2

30 Dec 1988

5340-12-365-9316
Flush Lock

123659316
622622: RNCC: 3 | RNVC: 2

18 Feb 2005

5340-12-197-2491
Folding Stay

121972491
6030225: RNCC: 3 | RNVC: 2

4 Oct 1983

5340-12-349-0598
Mounting Bracket

123490598
2300387-700850.003: RNCC: 2 | RNVC: 2
9911485: RNCC: 3 | RNVC: 2
2300387-700850.003: RNCC: 5 | RNVC: 9
9911485: RNCC: 5 | RNVC: 9

20 Sep 1999

5340-12-092-0894

5340-12-318-1719
Split Tubular Clip

123181719
8038 034 110: RNCC: 3 | RNVC: 2
81461360008: RNCC: 5 | RNVC: 2
8038034110: RNCC: 5 | RNVC: 2
8038034110: RNCC: 5 | RNVC: 2
8038034110: RNCC: 5 | RNVC: 9

16 Jun 1989

5340-12-307-3533

5340-12-356-2447
Hand Crank

123562447
JSU05: RNCC: 3 | RNVC: 2
JSU05: RNCC: 5 | RNVC: 2
AL50015735: RNCC: 5 | RNVC: 2

5 Feb 2002

5340-12-180-4685
Webbing Strap

121804685
4357928796: RNCC: 3 | RNVC: 2
4357927196: RNCC: 5 | RNVC: 9

12 Sep 1979

5340-12-195-2416
Retaining Strap

121952416
BSS2X12X25X3: RNCC: 3 | RNVC: 2
15320000012: RNCC: 5 | RNVC: 2
5320000012: RNCC: 5 | RNVC: 2

27 Jan 1983

5340-12-381-4443
Dust And Moisture Seal Protective Plug

123814443
113743: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-12-180-6642
Access Cover

121806642
0287 6856: RNCC: 3 | RNVC: 2
2876856: RNCC: 5 | RNVC: 2
2876856EC0704-78: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-343-0793
Angle Bracket

123430793
CF 833 751 A: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-365-4416
Mounting Bracket

123654416
5161-211130A01B: RNCC: 2 | RNVC: 2
5161-211130A01B: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-12-337-8496
Webbing Strap

123378496
62118: RNCC: 3 | RNVC: 2
M 45635: RNCC: 5 | RNVC: 2
MA 0101 T 002-4: RNCC: 5 | RNVC: 2
162118: RNCC: 5 | RNVC: 9

24 Apr 1995

5340-12-161-2667
Magnetic Catch

121612667
6020012: RNCC: 3 | RNVC: 2
7-221-1310: RNCC: 5 | RNVC: 2
GHE6020012: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-328-6175
Multiple Angle Bracket

123286175
5801438-55466.003: RNCC: 3 | RNVC: 2

10 Jun 1992

5340-12-194-1109
Retaining Strap

121941109
2500136-9005.00: RNCC: 3 | RNVC: 2
309371: RNCC: 5 | RNVC: 2
2500136-9005.00: RNCC: 5 | RNVC: 2
2500136-9005.00: RNCC: 5 | RNVC: 9

4 Oct 1982

5340-12-325-4168
Access Cover

123254168
2300061-053190.000: RNCC: 2 | RNVC: 2
2300061-053190.000: RNCC: 3 | RNVC: 2
9840448: RNCC: 3 | RNVC: 2
2300061-053190.000: RNCC: 5 | RNVC: 9
9840448: RNCC: 5 | RNVC: 9
2300061-053190: RNCC: 5 | RNVC: 9
2300061-053190.000: RNCC: 5 | RNVC: 9

5 Jun 1991

5340-12-393-8281
Mounting Bracket

123938281
11.07343-0169: RNCC: 3 | RNVC: 2
11.07343-0169: RNCC: 5 | RNVC: 2

15 Oct 2013

5340-12-302-4736
Angle Bracket

123024736
556-404204.000: RNCC: 3 | RNVC: 2
556-404204-000: RNCC: 5 | RNVC: 2

4 Jan 1985

5340-12-701-8778
Angle Bracket

127018778
VG95211-ML-127018778: RNCC: 2 | RNVC: 2
76-5505-613: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-146-6346
Resilient Mount

121466346
DIN95363-B50X40-M10X18,5-NR60ST: RNCC: 2 | RNVC: 2
51003823: RNCC: 5 | RNVC: 2
57810970115: RNCC: 5 | RNVC: 2
81110-50X40-M10X18,5.NR60.ST: RNCC: 5 | RNVC: 2
781097S1MITTEL: RNCC: 5 | RNVC: 2
VG95363-B50X40-NR60ST-M10X18,5: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-311-8711
Double Angle Bracket

123118711
2500179-197400.001.0: RNCC: 2 | RNVC: 2
2500179-197400.001.0: RNCC: 3 | RNVC: 2

26 Oct 1987

5340-12-196-5060
Nonmetallic Bumper

121965060
P-921173-001: RNCC: 3 | RNVC: 2
P921173-001: RNCC: 5 | RNVC: 2

13 Jul 1983

5340-12-323-5729
Handle Grip

123235729
64417016: RNCC: 3 | RNVC: 2
421.1174-01.3: RNCC: 5 | RNVC: 2
4417/016-0: RNCC: 5 | RNVC: 9

7 Dec 1990

5340-12-188-0462
Loop Clamp

121880462
DIN3016-1-E2-28-28X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E2-28-28X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.2X28/15: RNCC: 3 | RNVC: 2
RSGU2X28-15: RNCC: 5 | RNVC: 2
4209215028: RNCC: 5 | RNVC: 2
RSGU2X28/15: RNCC: 5 | RNVC: 2
DIN3016-E2-28-28X15-W1-2: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-150-4761
Retaining Strap

121504761
1202 2126: RNCC: 3 | RNVC: 2
12022126: RNCC: 5 | RNVC: 2
26.13-207.4: RNCC: 5 | RNVC: 2
26-13-207-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-370-1081
Spring Loaded Cylinder Fastener

123701081
GN 608.1-8-18: RNCC: 3 | RNVC: 2
BM050045: RNCC: 5 | RNVC: 2

21 Sep 2006

5340-12-324-3743
Electrical-Mechanical Equipment Post

123243743
VG95148C5XM3X20-2.0380.30-E2A: RNCC: 2 | RNVC: 2
DA5-M3X20: RNCC: 3 | RNVC: 2
VG95148C5XM3X20-2.0380.30-E2A: RNCC: 3 | RNVC: 2

8 Feb 1991

5340-12-312-0911
Angle Bracket

123120911
P-295489-009: RNCC: 3 | RNVC: 2
P295489-009: RNCC: 5 | RNVC: 2

19 Nov 1987

5340-12-700-8927
Loop Clamp

127008927
2-8-10-6-1 CHIM.PAS. OST1 11125-: RNCC: 3 | RNVC: 1

6 Feb 1995

5340-12-340-7808
Mounting Bracket

123407808
VS8221G014: RNCC: 3 | RNVC: 2
VS 8221 G 104: RNCC: 5 | RNVC: 9
VS8221G014: RNCC: 5 | RNVC: 9

12 Jun 1996

5340-12-359-4935
Support Hook

123594935
2500262-970641.000.0: RNCC: 2 | RNVC: 2
2500262-970641.000.0: RNCC: 3 | RNVC: 2

11 Feb 2003

5340-12-318-3853
Mounting Bracket

123183853
22014.0.08.710.00: RNCC: 2 | RNVC: 2
22014.0.08.710.00: RNCC: 3 | RNVC: 2

10 Jul 1989

5340-12-324-4123
Metallic Bumper

123244123
900-905430.02.0: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-12-193-5902
Loop Clamp

121935902
4609955410: RNCC: 3 | RNVC: 2
721 1 85 745 2: RNCC: 5 | RNVC: 9

9 Aug 1982

5340-12-356-7673
Dust And Moisture Seal Protective Plug

123567673
6419970286: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-305-3603
Escutcheon Plate

123053603
3097660425: RNCC: 3 | RNVC: 2

25 Oct 1985

5340-12-307-8885
Mending Plate

123078885
2996.62.65: RNCC: 3 | RNVC: 2

7 Aug 1986

5340-12-327-3765
Clamping Catch

123273765
2500171-480000.01: RNCC: 2 | RNVC: 2
2500171-480000.01: RNCC: 3 | RNVC: 2

16 Jan 1992

5340-12-360-4114
Mounting Bracket

123604114
3511150823: RNCC: 3 | RNVC: 2
3511150823: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-172-8847
Mending Plate

121728847
2382-023000.19.0: RNCC: 2 | RNVC: 2
4592035201: RNCC: 3 | RNVC: 2
2382-023000-19-0: RNCC: 5 | RNVC: 2
2382-023000.19.0: RNCC: 5 | RNVC: 2
2382-023000.19.0: RNCC: 5 | RNVC: 2
2382-023000.19.0: RNCC: 5 | RNVC: 2
2382-023000-19-0: RNCC: 5 | RNVC: 9
2382-023000.19.0: RNCC: 5 | RNVC: 9

2 Mar 1978

5340-12-306-3573
Angle Bracket

123063573
A-230609-023: RNCC: 3 | RNVC: 2
A230609-023: RNCC: 5 | RNVC: 2

24 Feb 1986

5340-12-317-3273
Loop Clamp

123173273
DIN3016-G1-125X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-125X15-W1-2: RNCC: 3 | RNVC: 2
SP125/15SZ-W1: RNCC: 3 | RNVC: 2
DIN3016-G1-125X15W1-2: RNCC: 5 | RNVC: 2
51.97445.0028: RNCC: 5 | RNVC: 2
51974450028: RNCC: 5 | RNVC: 2
DIN3016-G1-125X15W1-2: RNCC: 5 | RNVC: 2
01410000125: RNCC: 5 | RNVC: 2
1410000125: RNCC: 5 | RNVC: 2
SP125/15SZ: RNCC: 5 | RNVC: 2

29 Mar 1989

5340-12-359-9560
Access Cover

123599560
2819-191010.000.0: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-12-152-8612
Retaining Strap

121528612
DIN72571-1X5-ST: RNCC: 2 | RNVC: 2
DIN72571-1X5-ST: RNCC: 3 | RNVC: 2
0592 5: RNCC: 5 | RNVC: 2
1X5DIN72571-ST: RNCC: 5 | RNVC: 2
1X5DIN72571ST: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-702-0048
Loop Clamp

127020048
VG95211-ML-127020048: RNCC: 2 | RNVC: 2
1729S-50-38-T: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-300-3629
Hand Crank

123003629
5077 222 012: RNCC: 3 | RNVC: 2
2-9802-0300-2: RNCC: 5 | RNVC: 2
5077222012: RNCC: 5 | RNVC: 2
2.9802-0300.2: RNCC: 5 | RNVC: 9

27 Jul 1984

5340-12-320-4951
Loop Clamp

123204951
DIN3015-LH-6R-50,8-PP-W1: RNCC: 2 | RNVC: 2
HRL6D50,8PP STMBL: RNCC: 3 | RNVC: 2
RAPR18-6 2IN: RNCC: 3 | RNVC: 2
650,8PP-SIG-AF: RNCC: 3 | RNVC: 2
RAPR18-6 2IN: RNCC: 5 | RNVC: 2
DIN3015-LH6R-50,8PP-W1: RNCC: 5 | RNVC: 2

19 Jan 1990

5340-12-194-1845
Bow Handle

121941845
3603-01: RNCC: 3 | RNVC: 2
ZB 4: RNCC: 5 | RNVC: 2
6L.3731.003.00-741857: RNCC: 5 | RNVC: 2
6L3731-003-741857: RNCC: 5 | RNVC: 9

11 Oct 1982

5340-12-180-5611
Dust And Moisture Seal Protective Plug

121805611
584K0010-2: RNCC: 3 | RNVC: 2
03439684: RNCC: 5 | RNVC: 2
3439684EE5505-04: RNCC: 5 | RNVC: 2

19 Sep 1979

5340-12-367-4771
Loop Clamp

123674771
071555104501: RNCC: 3 | RNVC: 2
DIN71555-104,5-DBL7398.20: RNCC: 5 | RNVC: 2

24 Aug 2005

5340-12-191-8021
Angle Bracket

121918021
4604924441: RNCC: 3 | RNVC: 2
1754-53: RNCC: 5 | RNVC: 2
721 1 12 197 1: RNCC: 5 | RNVC: 9

8 Mar 1982

5340-12-177-4987
Butt Hinge Leaf

121774987
2500001-288132.002: RNCC: 2 | RNVC: 2
V22-631-122-2: RNCC: 3 | RNVC: 2
2500001-288132.002: RNCC: 5 | RNVC: 2
2500001-288132-002: RNCC: 5 | RNVC: 9
2500001-288132.002: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-304-0674
Clamping Catch

123040674
8126-141: RNCC: 2 | RNVC: 2
8126-141: RNCC: 5 | RNVC: 9

7 Jun 1985

5340-12-131-5631
Turnbuckle

121315631
DIN82004-A2-VERZINKT: RNCC: 2 | RNVC: 2
DIN82004-A2-ZN: RNCC: 3 | RNVC: 2
6500024V: RNCC: 5 | RNVC: 2
A2DIN82004VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-382-6105
Loop Clamp

123826105
HYRAC 106-114: RNCC: 3 | RNVC: 2
331/38636: RNCC: 5 | RNVC: 2

16 Jul 2010

5340-12-338-2698
Clamping Catch

123382698
1429L02-1X1BP: RNCC: 3 | RNVC: 2
1056757T00: RNCC: 5 | RNVC: 2
1429L02-1T1BP: RNCC: 5 | RNVC: 9

13 Jun 1995

5340-12-364-2499
Expansion Plug

123642499
3669970020: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-411-4758

5340-12-356-0885
Mounting Bracket

123560885
J92228892-003: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-185-9356
Padlock Eye

121859356
734101-000-0: RNCC: 3 | RNVC: 2
1284781: RNCC: 5 | RNVC: 2
4900059-734101-000-0: RNCC: 5 | RNVC: 2
4900059-734101.000.0: RNCC: 5 | RNVC: 2
4900059-734101-000-0: RNCC: 5 | RNVC: 9
4900059-734101.000.0: RNCC: 5 | RNVC: 9

11 Nov 1980

5340-12-382-8127
Quick Release Plunger

123828127
GN 615-M12-KSN: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-12-174-4660
Mending Plate

121744660
23223-060000-30-0: RNCC: 2 | RNVC: 2
23223-060000-30-0: RNCC: 5 | RNVC: 2
23223-060000.30.0: RNCC: 5 | RNVC: 2
23223-060000.30.0: RNCC: 5 | RNVC: 9

3 Jul 1978

5340-12-703-1086
Pawl Fastener

127031086
VG95211-ML-127031086: RNCC: 2 | RNVC: 2
155N991-3: RNCC: 3 | RNVC: 2
0500802718799: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-382-0412
Mounting Plate

123820412
33067-008-002: RNCC: 3 | RNVC: 2

30 Apr 2010

5340-12-313-5566
Angle Bracket

123135566
C249-A31-C17: RNCC: 3 | RNVC: 2

15 Apr 1988

5340-12-322-4888
Casement Fastener

123224888
8100397-330: RNCC: 2 | RNVC: 2
8100397-330: RNCC: 3 | RNVC: 2

27 Aug 1990

5340-12-301-4516
Case Corner

123014516
5801435-080330.00: RNCC: 3 | RNVC: 2
5801435-080330-00: RNCC: 5 | RNVC: 2
5801435-080330.00: RNCC: 5 | RNVC: 9

16 Oct 1984

5340-12-362-3076
Loop Clamp

123623076
LN9490BK7: RNCC: 2 | RNVC: 2

5 Feb 2004

5340-12-379-2976
Bumper

123792976
0072857: RNCC: 3 | RNVC: 2

10 Jul 2009

5340-12-379-2954
Manual Control Lever

123792954
20181864: RNCC: 3 | RNVC: 2

10 Jul 2009

5340-12-365-7092
Bow Handle

123657092
9438150236: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-392-9841
Mounting Bracket

123929841
4000004650: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-12-199-1775
Resilient Mount

121991775
281407077: RNCC: 3 | RNVC: 2

3 Apr 1984

5340-12-302-7882
Leather Strap

123027882
CF 324 326: RNCC: 3 | RNVC: 2
CF 324 326: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-315-8871
Retaining Strap

123158871
1079950320: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-12-192-3141
Handle Grip

121923141
E3469: RNCC: 3 | RNVC: 2
42481454: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-342-1413
Lock-Release Lever

123421413
536M08751: RNCC: 3 | RNVC: 2
536M08751D1: RNCC: 5 | RNVC: 2

18 Dec 1996

5340-12-353-6688
Angle Bracket

123536688
000000-1001.329: RNCC: 3 | RNVC: 2
000000-1001.329: RNCC: 5 | RNVC: 2
000000-1001.329: RNCC: 5 | RNVC: 9

25 Apr 2001

5340-12-158-6852

5340-12-178-2452
Halter

121782452
K18761: RNCC: 3 | RNVC: 2
021129397: RNCC: 5 | RNVC: 2

9 Apr 1979

5340-12-179-6787
Retaining Clip

121796787
4252540294: RNCC: 3 | RNVC: 2

18 Jul 1979

5340-12-164-5573
Buckle

121645573
0454A: RNCC: 3 | RNVC: 2
0454A VERZINKT: RNCC: 5 | RNVC: 9
0454ASTVERCADMET: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-392-4727
Access Cover

123924727
522001900: RNCC: 3 | RNVC: 2

12 Jun 2013

5340-12-382-8724
Manual Control Handle

123828724
41287901309: RNCC: 3 | RNVC: 2

18 Aug 2010

5340-12-311-3505
Double Angle Bracket

123113505
272.338 109: RNCC: 2 | RNVC: 2
272.338.109: RNCC: 3 | RNVC: 2
272.338 109: RNCC: 5 | RNVC: 9

21 Aug 1987

5340-12-135-6768

5340-12-143-2963
Webbing Strap

121432963
RELGH394T82: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-090-7108

5340-12-303-5716
Double Angle Bracket

123035716
5802017-600253.00: RNCC: 2 | RNVC: 2
5802017-600253.00: RNCC: 3 | RNVC: 2

9 Apr 1985

5340-12-355-5470
Mounting Plate

123555470
8470003121: RNCC: 3 | RNVC: 2
06440P004087: RNCC: 5 | RNVC: 2

22 Nov 2001

5340-12-166-6372

5340-12-183-0525
Angle Bracket

121830525
42013600: RNCC: 3 | RNVC: 2
42013600ED5059-80: RNCC: 5 | RNVC: 2

15 Mar 1980

5340-12-300-7442

5340-12-306-6551
Resilient Mount

123066551
E1E 2881S02: RNCC: 3 | RNVC: 2
E1E2881S02: RNCC: 5 | RNVC: 2

19 Mar 1986

5340-12-327-0377
Double Angle Bracket

123270377
58733-625: RNCC: 3 | RNVC: 2

25 Nov 1991

5340-12-365-3251
Double Angle Bracket

123653251
5161-211110A01B: RNCC: 2 | RNVC: 2
5161-211110A01B: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-184-8285
Angle Bracket

121848285
5801505-322-003: RNCC: 3 | RNVC: 2
5801505-322.003: RNCC: 5 | RNVC: 2

21 Aug 1980

5340-12-702-2237
Loop Clamp

127022237
VG95211-ML-127022237: RNCC: 2 | RNVC: 2
30.7601.520: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-388-0032
Webbing Strap

123880032
5803688-101370.00: RNCC: 2 | RNVC: 2
0106.13700.160: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-378-5372
Bow Handle

123785372
1095-10: RNCC: 3 | RNVC: 2

20 Apr 2009

5340-12-363-2325
Cushioning Pad

123632325
GSTR99-00-440000.01: RNCC: 3 | RNVC: 2

14 May 2004

5340-12-342-1388
Pipe Hanger

123421388
1816011100-W4: RNCC: 3 | RNVC: 2
SPGU6011.100/30SK-W4: RNCC: 5 | RNVC: 2
909621783: RNCC: 5 | RNVC: 2

18 Dec 1996

5340-12-197-4235
Access Door

121974235
20817-188: RNCC: 3 | RNVC: 2
20817-188: RNCC: 5 | RNVC: 2

20 Oct 1983

5340-12-386-1075
Frame Se Connector

123861075
2481-395521.000.0: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-12-175-9821
Spring Loaded Cylinder Fastener

121759821
1193-10.00: RNCC: 3 | RNVC: 2
BK7002: RNCC: 3 | RNVC: 2
1193-10-00: RNCC: 5 | RNVC: 2
BK7002: RNCC: 5 | RNVC: 9

2 Nov 1978

5340-12-381-3324
Bumper

123813324
89000601: RNCC: 3 | RNVC: 2
106/3133-01-10-01: RNCC: 5 | RNVC: 2

3 Feb 2010

5340-12-303-0473
Metal Runner

123030473
2W111A008-1210.04: RNCC: 3 | RNVC: 2

22 Feb 1985

5340-12-124-4595
Leather Strap

121244595
NO PRIMARY REF 12-124-4595: RNCC: 3 | RNVC: 2
DIN6408-A16X100-GEBRAEUNT,GENAE.: RNCC: 5 | RNVC: 9
A16X100DIN6408ANGEBRAEUNTGENAEHT: RNCC: 5 | RNVC: 9
DIN6408-A16X100-ANGEBRAEUNT,GENA: RNCC: 5 | RNVC: 9
DIN6408-A16X100-GEBRAEUNT,GENAE.: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-0626
Double Angle Bracket

121980626
80002093: RNCC: 3 | RNVC: 2
80002093EZ5013-02: RNCC: 5 | RNVC: 2

15 Dec 1983

5340-12-310-6618
Manual Control Handle

123106618
09020009902: RNCC: 3 | RNVC: 2
0902-000-9902: RNCC: 5 | RNVC: 2
09020009902: RNCC: 5 | RNVC: 2
160-1058: RNCC: 5 | RNVC: 2

12 Jun 1987

5340-12-190-3343
Loop Clamp

121903343
03421125: RNCC: 3 | RNVC: 2
3421125EF5034-71: RNCC: 5 | RNVC: 2
5155-71-24.01: RNCC: 5 | RNVC: 2
E5155-71-24.01: RNCC: 5 | RNVC: 2
3421125: RNCC: 5 | RNVC: 9

23 Nov 1981

5340-12-159-1300
Loop Clamp

121591300
Q314-230-055: RNCC: 3 | RNVC: 2
Q314-230-055: RNCC: 5 | RNVC: 2
Q314230055: RNCC: 5 | RNVC: 2
Q 314 230 055: RNCC: 5 | RNVC: 2
Q314230055: RNCC: 5 | RNVC: 2
N 3142 300 55: RNCC: 5 | RNVC: 2
ZN314-230-055: RNCC: 5 | RNVC: 2
N314-230-055: RNCC: 5 | RNVC: 2
Q 314 230 055: RNCC: 5 | RNVC: 2
Q314230055: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-344-3747
Double Angle Bracket

123443747
A-296771-053: RNCC: 3 | RNVC: 2
A296771-053: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-164-3625
Bow Handle

121643625
2360-184180.00.0: RNCC: 2 | RNVC: 2
2360-184180-00-0: RNCC: 5 | RNVC: 2
2360-184180.00.0: RNCC: 5 | RNVC: 2
2360-184180-00-0: RNCC: 5 | RNVC: 2
2360-184180.00.0: RNCC: 5 | RNVC: 2
2360-184180-00-0: RNCC: 5 | RNVC: 9
2360-184180.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-8259
Loop Clamp

127018259
VG95211-ML-127018259: RNCC: 2 | RNVC: 2
5.84.7601.1300.00: RNCC: 3 | RNVC: 2
84.7601-1300: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-333-8706
Mounting Bracket

123338706
406-1-3: RNCC: 3 | RNVC: 2
406-1.3: RNCC: 5 | RNVC: 2

18 Feb 1994

5340-12-371-9379
Mit Klemmverbinder

123719379
GN286-B20-B20-S-131-SW: RNCC: 3 | RNVC: 2

31 May 2007

5340-12-313-6643
Block Clamp

123136643
P-896398-015: RNCC: 3 | RNVC: 2
P896398-015: RNCC: 5 | RNVC: 2

23 Apr 1988

5340-12-307-5974
Double Angle Bracket

123075974
P-243875-755: RNCC: 3 | RNVC: 2
P243875-755: RNCC: 5 | RNVC: 2

7 Jul 1986

5340-12-154-2640
Compression Cup

121542640
H330-1-88NBR/101: RNCC: 3 | RNVC: 2
H330-1-14PA101: RNCC: 5 | RNVC: 2
H330-1-88NBR101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-184-9625
Access Cover

121849625
F01-240150-02-0: RNCC: 3 | RNVC: 2

28 Aug 1980

5340-12-702-1720
Angle Bracket

127021720
VG95211-ML-127021720: RNCC: 2 | RNVC: 2
30.7143.65: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-149-0144
Hand Crank

121490144
7-29-7-01-05-00-01: RNCC: 3 | RNVC: 2
109210-2154-000: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-164-3639
Double Angle Bracket

121643639
2360-026000.14.0: RNCC: 2 | RNVC: 2
2360-026000.14.0: RNCC: 3 | RNVC: 2
2360-026000-14-0: RNCC: 5 | RNVC: 2
2360-026000.14.0: RNCC: 5 | RNVC: 2
2360-026000-14-0: RNCC: 5 | RNVC: 2
2360-026000-14-0: RNCC: 5 | RNVC: 9
2360-026000.14.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-324-7080
Mounting Plate

123247080
52820-W8.05: RNCC: 3 | RNVC: 2

19 Mar 1991

5340-12-352-8821
Access Cover

123528821
5000 000 096: RNCC: 3 | RNVC: 2

2 Jan 2001

5340-12-308-7217
Loop Clamp

123087217
1281-14400.19: RNCC: 2 | RNVC: 2
159282: RNCC: 3 | RNVC: 2
1281-14400.19: RNCC: 5 | RNVC: 2

11 Nov 1986

5340-12-377-8167
Dust And Moisture Seal Boot

123778167
PRSH3543108: RNCC: 3 | RNVC: 2

12 Feb 2009

5340-12-306-8585
Butt Hinge

123068585
KL1591000: RNCC: 3 | RNVC: 2
KL 1591: RNCC: 5 | RNVC: 2

10 Apr 1986

5340-12-307-4865
Mounting Bracket

123074865
5577167: RNCC: 3 | RNVC: 2

23 Jun 1986

5340-12-342-6118
Mounting Bracket

123426118
4205659007: RNCC: 3 | RNVC: 2
4205019007: RNCC: 5 | RNVC: 2

6 Mar 1997

5340-12-027-3990

5340-12-361-7626
Mounting Bracket

123617626
1960-010100.000.0: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-12-701-7958
Mounting Plate

127017958
VG95211-ML-127017958: RNCC: 2 | RNVC: 2
5.12.8102.2502.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-347-5644
Access Cover

123475644
1682-032000.004.0: RNCC: 2 | RNVC: 2
1682-032000.004.0: RNCC: 3 | RNVC: 2

7 Jan 1999

5340-12-185-2470
Mounting Plate

121852470
NO PRIMARY REF 12-185-2470: RNCC: 3 | RNVC: 2
06-4-7528: RNCC: 5 | RNVC: 9
1-6899-06-4-7528: RNCC: 5 | RNVC: 9

23 Sep 1980

5340-12-167-0945
Plain Solid Disk

121670945
00.950.21: RNCC: 3 | RNVC: 2
00-950-21: RNCC: 5 | RNVC: 2

23 Nov 1976

5340-12-342-5644
Double Angle Bracket

123425644
463-151517.001: RNCC: 3 | RNVC: 9
9897767: RNCC: 5 | RNVC: 9

27 Feb 1997

5340-12-338-8377
Mounting Bracket

123388377
463-223600.009: RNCC: 3 | RNVC: 9
9896379: RNCC: 5 | RNVC: 9

30 Aug 1995

5340-12-177-5127
Nonmetallic Bumper

121775127
DIN95364-C30X18-NR55ST: RNCC: 2 | RNVC: 2
81150-30X18-M8.NR55.ST: RNCC: 5 | RNVC: 2
1.30.18.5.55NR/ST: RNCC: 5 | RNVC: 2
25356/E-BSTN5590: RNCC: 5 | RNVC: 2
25356ESM550: RNCC: 5 | RNVC: 2
25356/E,NR55ST: RNCC: 5 | RNVC: 2
VG95364-C30X18-NR55ST: RNCC: 5 | RNVC: 9
25356/E-SM550: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-343-1652
Resilient Mount

123431652
0118048/11MN60: RNCC: 3 | RNVC: 2
0118048-11MN60: RNCC: 5 | RNVC: 2
003 059-0000: RNCC: 5 | RNVC: 2
0030590000: RNCC: 5 | RNVC: 2

13 May 1997

5340-12-378-4205
Access Cover

123784205
1650-512000-11: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-197-9575
Spring Holder

121979575
2702042800: RNCC: 3 | RNVC: 2
LG 240428: RNCC: 5 | RNVC: 2
27020 42800: RNCC: 5 | RNVC: 9

5 Dec 1983

5340-12-043-8705

5340-12-040-8300

5340-12-197-4505
Metal Runner

121974505
30817-074: RNCC: 3 | RNVC: 2
30817-074: RNCC: 5 | RNVC: 2

24 Oct 1983

5340-12-351-7671
Loop Clamp

123517671
IKLN86-28-1.0038: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-310-2989
Angle Bracket

123102989
5801758-0800.01: RNCC: 2 | RNVC: 2
5801758-0800.01: RNCC: 3 | RNVC: 2

7 May 1987

5340-12-366-1095
Catch Strike

123661095
2500267-191500.006.0: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-350-6050
Support Hook

123506050
160-88354-03: RNCC: 3 | RNVC: 2
160-88354-03: RNCC: 5 | RNVC: 9

19 Apr 2000

5340-12-373-2998
Multiple Angle Bracket

123732998
1166261114: RNCC: 3 | RNVC: 2
116 626 11 14: RNCC: 5 | RNVC: 2
A1166261114: RNCC: 5 | RNVC: 9

18 Oct 2007

5340-12-361-4505
Loop Clamp

123614505
1217 4027: RNCC: 3 | RNVC: 2

1 Oct 2003

5340-12-310-9188
Mounting Bracket

123109188
4027327: RNCC: 3 | RNVC: 2

9 Jul 1987

5340-12-349-1120
Access Cover

123491120
4275400252: RNCC: 3 | RNVC: 2

27 Sep 1999

5340-12-300-3500
Bridge Clamp

123003500
3817250118: RNCC: 3 | RNVC: 2

26 Jul 1984

5340-12-050-0036

5340-12-372-9954
Spring Loaded Cylinder Fastener

123729954
SGS 1014 VZ: RNCC: 3 | RNVC: 2

14 Sep 2007

5340-12-362-9776
Webbing Strap

123629776
2300042-992544.000: RNCC: 2 | RNVC: 2
2300042-992544.000: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-12-315-8872
Mounting Bracket

123158872
6172360340: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-12-040-6596

5340-12-316-7114
Angle Bracket

123167114
4634200086: RNCC: 3 | RNVC: 2
4814-55: RNCC: 5 | RNVC: 2
ZR34200086: RNCC: 5 | RNVC: 2

7 Feb 1989

5340-12-304-9166

5340-12-300-3446
Loop Clamp

123003446
6100128-7000.002: RNCC: 2 | RNVC: 2
4209017912: RNCC: 3 | RNVC: 2

26 Jul 1984

5340-12-361-7735
Spring Loaded Cylinder Fastener

123617735
2212.610: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-12-090-1011

5340-12-144-8643
An Scharnierlappen

5340-12-125-0812
Massiv Scheibe

5340-12-152-7801
Spannschlosz

5340-12-165-8889
Verbindungs Platte

5340-12-353-7067
Loop Clamp

123537067
47326003150: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-143-8021
Schraubendruc Sitz

5340-12-303-9917
Double Angle Bracket

123039917
8450050001: RNCC: 3 | RNVC: 2
84500 50001: RNCC: 5 | RNVC: 9

29 May 1985

5340-12-300-4515
Mending Plate

123004515
AZ8104T025: RNCC: 3 | RNVC: 2
AZ8104T025: RNCC: 5 | RNVC: 9
AZ8104T025: RNCC: 5 | RNVC: 9

2 Aug 1984

5340-12-090-7864

5340-12-143-1272
Anschlag Scharnier

5340-12-143-7712
Federkraft- Klipp

5340-12-323-7918
Loop Clamp

123237918
0289 0059: RNCC: 3 | RNVC: 2

19 Dec 1990

5340-12-184-8882
Bow Handle

121848882
CF327184: RNCC: 3 | RNVC: 2
CF 327 184: RNCC: 5 | RNVC: 2
CF327184: RNCC: 5 | RNVC: 2
CF 327 184: RNCC: 5 | RNVC: 2

26 Aug 1980

5340-12-362-7653
Mounting Plate

123627653
S535M1069217: RNCC: 3 | RNVC: 2

30 Mar 2004

5340-12-191-1665
Spann- Verschlusz

5340-12-131-6675
Leder- Riemen

5340-12-151-5834
Federkraft- Klipp

5340-12-181-9774
Loop Clamp

121819774
NO PRIMARY REF 12-181-9774: RNCC: 3 | RNVC: 2
066241: RNCC: 5 | RNVC: 9
466241: RNCC: 5 | RNVC: 9

4 Jan 1980

5340-12-168-5641
Angle Bracket

121685641
C22107A137C115: RNCC: 3 | RNVC: 2
C22107-A137-C115: RNCC: 5 | RNVC: 2

23 Mar 1977

5340-12-315-5299
Double Angle Bracket

123155299
5803471-201310.01: RNCC: 2 | RNVC: 2
65.7789.421.01-A001: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-12-327-4942
Access Cover

123274942
272.1770.21-02: RNCC: 2 | RNVC: 2
272.1770.21-02: RNCC: 3 | RNVC: 2

28 Jan 1992

5340-12-329-8742
Tee Hinge

123298742
160-82172: RNCC: 3 | RNVC: 2
15160-82172: RNCC: 5 | RNVC: 2
160-82172: RNCC: 5 | RNVC: 9

8 Oct 1992

5340-12-383-8847
Dust And Moisture Seal Protective Cap

123838847
NO PRIMARY REF 12-383-8847: RNCC: 3 | RNVC: 2
93193233: RNCC: 5 | RNVC: 2
42491842: RNCC: 5 | RNVC: 9

16 Dec 2010

5340-12-371-6014
Strap Fastener Loop

123716014
S20048-00: RNCC: 3 | RNVC: 2
S20048-00: RNCC: 5 | RNVC: 2

23 Apr 2007

5340-12-381-2960
Mounting Plate

123812960
424-04-K2-1: RNCC: 3 | RNVC: 2
4250473100349: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-353-9998
Padlock

123539998
DIN7465-E1-35-BK: RNCC: 2 | RNVC: 2
116-35 MM: RNCC: 3 | RNVC: 2
85/35 MM: RNCC: 3 | RNVC: 2

28 May 2001

5340-12-301-1694
Plain Solid Disk

123011694
P-230226-013: RNCC: 3 | RNVC: 2
P230226-013: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-198-5835
Loop Clamp

121985835
P-927702-001: RNCC: 3 | RNVC: 2
P927702-001: RNCC: 5 | RNVC: 2

14 Feb 1984

5340-12-354-8622
Access Cover

123548622
811000201/013,014,018: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-163-9998
Access Cover

121639998
V22.228.540100-7: RNCC: 3 | RNVC: 2
V2-228-540100-7: RNCC: 5 | RNVC: 2
V2.228.540100-7: RNCC: 5 | RNVC: 2
V22-228-540100-7EZ4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-176-8764
Resilient Mount

121768764
DIN95369-A3-5-CR-ST: RNCC: 2 | RNVC: 2
60-200-070: RNCC: 5 | RNVC: 2
151005-M10-CR.ST-70: RNCC: 5 | RNVC: 2
C2090: RNCC: 5 | RNVC: 2
VG95369-A3-5-CR-ST: RNCC: 5 | RNVC: 9
C2090: RNCC: 5 | RNVC: 9
C2090 M10: RNCC: 5 | RNVC: 9

20 Dec 1978

5340-12-010-6303

5340-12-164-1133
Butt Hinge

121641133
145-65X40: RNCC: 3 | RNVC: 2
GSV145-65X40: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-329-9848
Retaining Strap

123299848
23111-9620.10: RNCC: 2 | RNVC: 2
4634280740: RNCC: 5 | RNVC: 2
23111-9620.10: RNCC: 5 | RNVC: 2
23111-9620.10: RNCC: 5 | RNVC: 9

17 Oct 1992

5340-12-197-7976
Clamping Catch

121977976
7800190900: RNCC: 3 | RNVC: 2
5801807-9000: RNCC: 5 | RNVC: 2
5801807-9000: RNCC: 5 | RNVC: 9

23 Nov 1983

5340-12-168-0735
Retaining Clip

121680735
CF305828B: RNCC: 3 | RNVC: 2
CF 305 828 B: RNCC: 5 | RNVC: 2
CF305828A: RNCC: 5 | RNVC: 2
CF 305 828 A: RNCC: 5 | RNVC: 2
CF 305 828 B: RNCC: 5 | RNVC: 2
CF305828A: RNCC: 5 | RNVC: 2
CF305828B: RNCC: 5 | RNVC: 2
CF 305 828 A: RNCC: 5 | RNVC: 2
CF305828B: RNCC: 5 | RNVC: 2
CF 305 828 A: RNCC: 5 | RNVC: 2

14 Feb 1977

5340-12-393-5584
Mounting Bracket

123935584
4100098-722010.004.0: RNCC: 2 | RNVC: 2
4100098-722010.004.0: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-12-359-4377
Loop Clamp

123594377
DIN3016-1-D1-54X25-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-355-5777
Mounting Bracket

123555777
VR50R3-1-1AF: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-12-375-6027
Dust And Moisture Seal Protective Plug

123756027
0009976320: RNCC: 3 | RNVC: 2

17 Jun 2008

5340-12-360-3529
Spring Tension Clip

123603529
0009550302: RNCC: 3 | RNVC: 2
0009550302: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-179-7761
Webbing Strap

121797761
4258600794: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-375-6790
Bumper

123756790
4633230485: RNCC: 3 | RNVC: 2
4633230485: RNCC: 5 | RNVC: 2
A4633230485: RNCC: 5 | RNVC: 9

24 Jun 2008

5340-12-308-9877
Electrical-Mechanical Equipment Post

123089877
2859060617: RNCC: 3 | RNVC: 2

4 Dec 1986

5340-12-178-1422
Griffstueck

5340-12-170-6510
Mending Plate

121706510
09.030.26.903: RNCC: 3 | RNVC: 2
09-030-26-903: RNCC: 5 | RNVC: 2

25 Jul 1977

5340-12-386-4580
Rod End Connector

123864580
009-221.290-037: RNCC: 3 | RNVC: 2

2 Sep 2011

5340-12-164-5412
Angle Bracket

121645412
25704-190400.08.0: RNCC: 2 | RNVC: 2
25704-190400.08.0: RNCC: 3 | RNVC: 2
25704-190400.08.0: RNCC: 3 | RNVC: 2
25704-190400-08-0: RNCC: 5 | RNVC: 2
25704-190400-08-0: RNCC: 5 | RNVC: 9
25704-190400.08.0: RNCC: 5 | RNVC: 9
25704-190400.08.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-177-3683
Electrical-Mechanical Equipment Post

121773683
VG95148A4XM2X13,5NRST-PASSIVIERT: RNCC: 3 | RNVC: 2
51-6861-322-01: RNCC: 3 | RNVC: 2

29 Jan 1979

5340-12-154-2636
Compression Cup

121542636
H65-2-88NBR/101: RNCC: 3 | RNVC: 2
H65-2-14PA101: RNCC: 5 | RNVC: 2
H65-2-88NBR101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-348-4524
Access Cover

123484524
M10-74-107-60-0M1: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-12-157-1463
Spring Tension Clip

121571463
C42334A100B16: RNCC: 3 | RNVC: 2
C42334-A100-B16: RNCC: 5 | RNVC: 2
C42334A100B16: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-346-6232
Retaining Band

123466232
19697A: RNCC: 3 | RNVC: 2
196-97A: RNCC: 5 | RNVC: 2
196-97A: RNCC: 5 | RNVC: 2

18 Aug 1998

5340-12-154-8460
Loop Clamp

121548460
51.2404.706-07: RNCC: 3 | RNVC: 2
51-2404-706-07: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-333-2643
Mounting Bracket

123332643
LB-IV/2-40E01-36: RNCC: 2 | RNVC: 2

16 Nov 1993

5340-12-377-7924
Cushioning Pad

123777924
313181: RNCC: 3 | RNVC: 2
5342-05-00-05/37: RNCC: 5 | RNVC: 2

11 Feb 2009

5340-12-193-6054
Retaining Band

121936054
RBS8063.231/15: RNCC: 3 | RNVC: 9
561 8063 231: RNCC: 5 | RNVC: 9
5618063231: RNCC: 5 | RNVC: 9
HB5618063231: RNCC: 5 | RNVC: 9

10 Aug 1982

5340-12-332-3463
Mounting Bracket

123323463
1.220.844.7: RNCC: 3 | RNVC: 2
6556429: RNCC: 5 | RNVC: 2
1.220.844.7: RNCC: 5 | RNVC: 2

2 Aug 1993

5340-12-161-1740
Loop Clamp

121611740
BA502: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-149-0894
Retaining Strap

121490894
121G08014: RNCC: 3 | RNVC: 2
28209952625: RNCC: 5 | RNVC: 9
8209952625: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-368-1411
Access Cover

123681411
T524M3006102: RNCC: 2 | RNVC: 2
T524M3006102: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-12-322-2663
Electrical-Mechanical Equipment Post

123222663
54.2247.124.06: RNCC: 3 | RNVC: 2

7 Aug 1990

5340-12-092-2985

5340-12-126-5115

5340-12-159-3750
Retaining Strap

121593750
030789: RNCC: 3 | RNVC: 2
780-1-94-01-00-0-0-34: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-0151
Double Angle Bracket

123130151
P-086147-077: RNCC: 3 | RNVC: 2
P086147-077: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-701-9208
Loop Clamp

127019208
VG95211-ML-127019208: RNCC: 2 | RNVC: 2
TK5-65-D16 AT-AN GOST 17679-72: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-195-7891
Angle Bracket

121957891
P-230129-227: RNCC: 3 | RNVC: 2
P230129-227: RNCC: 5 | RNVC: 2

18 Apr 1983

5340-12-159-7563
Dust And Moisture Seal Protective Plug

121597563
1918-111646: RNCC: 2 | RNVC: 2
1918-111646: RNCC: 3 | RNVC: 2
1918-111646: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-2377
Mounting Bracket

123172377
5-450-120: RNCC: 3 | RNVC: 2
450 120: RNCC: 5 | RNVC: 9

20 Mar 1989

5340-12-155-7455
Resilient Mount

121557455
80708001: RNCC: 3 | RNVC: 2
410-104-B-00.00: RNCC: 3 | RNVC: 2
845.410-104B00-00: RNCC: 5 | RNVC: 2
410-104-B-00.00: RNCC: 5 | RNVC: 2
410-104B00-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-390-7914
Webbing Strap

123907914
6.667-221.0: RNCC: 3 | RNVC: 2

12 Dec 2012

5340-12-702-5454
Angle Bracket

127025454
VG95211-ML-127025454: RNCC: 2 | RNVC: 2
5.51.7210.1290.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-316-7505
Rod End Clevis

123167505
1000192-02 0 31000.13: RNCC: 2 | RNVC: 2
1000192-02 0 31000.13: RNCC: 3 | RNVC: 2
10003-002 0 31000.13: RNCC: 5 | RNVC: 2
1000192-02 0 31000.13: RNCC: 5 | RNVC: 9
10003-002 0 31000.13: RNCC: 5 | RNVC: 9

8 Feb 1989

5340-12-359-4392
Loop Clamp

123594392
DIN3016-1-E1-14X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-365-3049
Mounting Plate

123653049
327309-02: RNCC: 3 | RNVC: 2

17 Dec 2004

5340-12-194-3842
Mending Plate

121943842
A-616777-005: RNCC: 3 | RNVC: 2
A616777-005: RNCC: 5 | RNVC: 2

28 Oct 1982

5340-12-308-7788
Butt Hinge Leaf

123087788
1281-11130.02: RNCC: 2 | RNVC: 2
159062: RNCC: 3 | RNVC: 2
1281-11130.02: RNCC: 5 | RNVC: 2

17 Nov 1986

5340-12-373-5276
Retaining Strap

123735276
254 0252-001: RNCC: 3 | RNVC: 2
254 0252-001: RNCC: 5 | RNVC: 2

13 Nov 2007

5340-12-300-2035
Mending Plate

123002035
CF 324 779 A: RNCC: 3 | RNVC: 2
CF 324 779 A: RNCC: 5 | RNVC: 2

14 Jul 1984

5340-12-372-6143
Angle Bracket

123726143
2 0000-254: RNCC: 3 | RNVC: 2
2 0000-254: RNCC: 5 | RNVC: 2

3 Aug 2007

5340-12-311-0191
Metal Runner

123110191
061.118.2: RNCC: 3 | RNVC: 2
61118.2: RNCC: 5 | RNVC: 2

17 Jul 1987

5340-12-175-6977
Nonmetallic Bumper

121756977
CF432324C: RNCC: 3 | RNVC: 2
CF432324C: RNCC: 5 | RNVC: 2
CF 432 324 C: RNCC: 5 | RNVC: 2
CF 432 324 C: RNCC: 5 | RNVC: 2
CF 432 324 C: RNCC: 5 | RNVC: 2
CF432324C: RNCC: 5 | RNVC: 2

11 Oct 1978

5340-12-309-3281
Furniture Glide

123093281
KU F 22AF: RNCC: 3 | RNVC: 2
5432168: RNCC: 5 | RNVC: 2

15 Jan 1987

5340-12-394-3171
Luggage Handle

123943171
W.110.3393: RNCC: 3 | RNVC: 2

20 Nov 2013

5340-12-042-4166

5340-12-313-0847
Turnbuckle

123130847
P-896357-411: RNCC: 3 | RNVC: 2
P896357-411: RNCC: 5 | RNVC: 2

3 Mar 1988

5340-12-393-2740
Dust And Moisture Seal Protective Cap

123932740
GPN610U1-RAL3000: RNCC: 3 | RNVC: 2
610U1-RAL3000: RNCC: 5 | RNVC: 2
9789400010: RNCC: 5 | RNVC: 2
610U1 ROUGE: RNCC: 5 | RNVC: 2
610U1RAL3000: RNCC: 5 | RNVC: 2

4 Sep 2013

5340-12-390-9489
Mounting Bracket

123909489
5981-184061.000.0: RNCC: 2 | RNVC: 2
5981-184061.000.0: RNCC: 3 | RNVC: 2

9 Jan 2013

5340-12-359-3602
Mounting Bracket

123593602
SK688-131010.000.0: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-176-2788
Webbing Strap

121762788
23290-151076: RNCC: 2 | RNVC: 2
23290-151076: RNCC: 3 | RNVC: 2
23290-151076: RNCC: 5 | RNVC: 2
23290-151076: RNCC: 5 | RNVC: 9
23290-151076: RNCC: 5 | RNVC: 9
000-C1-25X2,5X1000-BW-RAL6031: RNCC: 6 | RNVC: 9

23 Nov 1978

5340-12-309-4462
Loop Clamp

123094462
DIN3015-L-KP-3-G-20-PP: RNCC: 2 | RNVC: 2
HRGL3KP20PP: RNCC: 3 | RNVC: 2
RAPG-320: RNCC: 3 | RNVC: 2
320PPH: RNCC: 3 | RNVC: 2
602008477: RNCC: 5 | RNVC: 2
RAPG-320: RNCC: 5 | RNVC: 2
DIN3015-LKP3G-20PP: RNCC: 5 | RNVC: 2
320PPH: RNCC: 5 | RNVC: 2
HR3LKL20.0/1-GLATT: RNCC: 5 | RNVC: 2

26 Jan 1987

5340-12-358-1570
Mechanical Stop

123581570
4038R-100030.000.0: RNCC: 2 | RNVC: 2
4038R-100030.000.0: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-12-702-5774
Mounting Bracket

127025774
VG95211-ML-127025774: RNCC: 2 | RNVC: 2
5.51.7802.0080.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-163-9765
Mending Plate

121639765
23305-143600-03-0: RNCC: 2 | RNVC: 2
23305-143600-03-0: RNCC: 5 | RNVC: 2
23305-143600.03.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-375-0432
Retaining Band

123750432
20000-737: RNCC: 3 | RNVC: 2
20000-737: RNCC: 5 | RNVC: 2

16 Apr 2008

5340-12-336-2588
Nut And Bolt Locking Plate

123362588
0730 749 109: RNCC: 3 | RNVC: 2
0730749109: RNCC: 5 | RNVC: 2

4 Nov 1994

5340-12-380-4719
Dust And Moisture Seal Protective Cap

123804719
GPN200Z7X16: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-191-5030
Plain Solid Disk

121915030
2000020001: RNCC: 3 | RNVC: 2
0001511276: RNCC: 5 | RNVC: 2
0001511276: RNCC: 5 | RNVC: 2
0001511276: RNCC: 5 | RNVC: 2

8 Feb 1982

5340-12-375-5257
Handle Grip

123755257
T14932: RNCC: 3 | RNVC: 2

11 Jun 2008

5340-12-335-6712
Double Angle Bracket

123356712
4110012663: RNCC: 3 | RNVC: 2

9 Sep 1994

5340-12-368-4628
Mounting Plate

123684628
5551840840: RNCC: 3 | RNVC: 2

14 Mar 2006

5340-12-308-8190
Manual Control Handle

123088190
5800980526: RNCC: 3 | RNVC: 2
580 098 05 26: RNCC: 5 | RNVC: 2

18 Nov 1986

5340-12-320-2114
Angle Bracket

123202114
0242 0276: RNCC: 3 | RNVC: 2
4079380: RNCC: 5 | RNVC: 2
02420276ED0148-17: RNCC: 5 | RNVC: 2

19 Dec 1989

5340-12-189-0349
Access Hole Frame

121890349
BD8101T034: RNCC: 3 | RNVC: 2
BD8101T034: RNCC: 5 | RNVC: 9
BD8101T034: RNCC: 5 | RNVC: 9

19 Aug 1981

5340-12-351-5048
Angle Bracket

123515048
4616930712: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-379-3920
Mounting Plate

123793920
371753: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-193-4901
Electrical-Mechanical Equipment Post

121934901
251102602001: RNCC: 3 | RNVC: 2

27 Jul 1982

Load More Results