What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 142 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 142 of 178

5340-12-355-7428
Double Angle Bracket

123557428
4619320114: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-12-367-9701
Nut And Bolt Locking Plate

123679701
HWA63410110: RNCC: 3 | RNVC: 2

13 Nov 2005

5340-12-347-2447
Retaining Strap

123472447
54.1094.281.00: RNCC: 3 | RNVC: 2

17 Nov 1998

5340-12-163-9768
Dust And Moisture Seal Protective Plug

121639768
300V24: RNCC: 3 | RNVC: 2
GPN300V24: RNCC: 5 | RNVC: 2
300V24: RNCC: 5 | RNVC: 2
GPN300V24: RNCC: 5 | RNVC: 2
301002400: RNCC: 5 | RNVC: 9
GPN300,V24: RNCC: 5 | RNVC: 9
V24: RNCC: 5 | RNVC: 9
V24GPN300: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-338-4913
Angle Bracket

123384913
9895144: RNCC: 3 | RNVC: 9
465-151430.002: RNCC: 5 | RNVC: 2

18 Jul 1995

5340-12-335-0158
Manual Control Lever

123350158
C2002-052-035: RNCC: 3 | RNVC: 2

12 Jul 1994

5340-12-149-7729
Webbing Strap

121497729
5800603-0953.000: RNCC: 2 | RNVC: 2
7409590019: RNCC: 5 | RNVC: 2
5800603-0953-000: RNCC: 5 | RNVC: 9
ST5800603-0953.000: RNCC: 5 | RNVC: 9
5800603-0953-000: RNCC: 5 | RNVC: 9
ST5800603-0953-000: RNCC: 5 | RNVC: 9
74095 90019: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-5709
Ball Socket Seat

121995709
160-88473-01: RNCC: 3 | RNVC: 2
160-88473.01: RNCC: 5 | RNVC: 2
160-88473-01: RNCC: 5 | RNVC: 2
160-88473.01: RNCC: 5 | RNVC: 9

15 May 1984

5340-12-358-1101
Butt Hinge Leaf

123581101
2800-193110.007.0: RNCC: 2 | RNVC: 2
2800-193110.007.0: RNCC: 3 | RNVC: 2

16 Sep 2002

5340-12-196-9847
Angle Bracket

121969847
4900059-323469.000.0: RNCC: 3 | RNVC: 2
4900059-323469-000-0: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-701-1603
Mounting Bracket

127011603
VG95211-ML-127011603: RNCC: 2 | RNVC: 2
5.12.0235.1005.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-375-8923
Handwheel

123758923
1-4512-004-01-RG-A-63X7: RNCC: 3 | RNVC: 2

17 Jul 2008

5340-12-198-9149
Angle Bracket

121989149
5077 327 045: RNCC: 3 | RNVC: 2
3709955021: RNCC: 5 | RNVC: 2
5077327045: RNCC: 5 | RNVC: 2
3.7099-5502.1: RNCC: 5 | RNVC: 9

13 Mar 1984

5340-12-341-9073
Angle Bracket

123419073
160-75129-05: RNCC: 3 | RNVC: 2
160-75129.05: RNCC: 5 | RNVC: 2
160-75129-05: RNCC: 5 | RNVC: 2
160-75129.05: RNCC: 5 | RNVC: 9

14 Nov 1996

5340-12-316-1900
Quick Release Plunger

123161900
04454-B-5: RNCC: 3 | RNVC: 2
24104420: RNCC: 5 | RNVC: 2
04454: RNCC: 5 | RNVC: 9

29 Dec 1988

5340-12-324-0202
Metal Runner

123240202
754-431900-932-0: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-12-338-4437
Access Door

123384437
7-637-1402-000-01: RNCC: 3 | RNVC: 9

11 Jul 1995

5340-12-702-5708
Mounting Bracket

127025708
VG95211-ML-127025708: RNCC: 2 | RNVC: 2
5.51.7701.2413.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-158-8143
Angle Bracket

121588143
0240 7368: RNCC: 3 | RNVC: 2
571292777: RNCC: 5 | RNVC: 2
4797289: RNCC: 5 | RNVC: 2
K0002407368: RNCC: 5 | RNVC: 2
2407368: RNCC: 5 | RNVC: 9
2407368KZ0147-39: RNCC: 5 | RNVC: 9
2409560UE0147-39: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-360-8911
Bow Handle

123608911
GN528.1-117-M8-SW: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-353-0635
Mounting Bracket

123530635
519-140200.14.0: RNCC: 2 | RNVC: 2
519-140200.14.0: RNCC: 3 | RNVC: 2
1103619: RNCC: 5 | RNVC: 2

24 Jan 2001

5340-12-701-6596
Angle Bracket

127016596
VG95211-ML-127016596: RNCC: 2 | RNVC: 2
5.12.7210.1002.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-383-9670
Access Cover

123839670
1315012: RNCC: 3 | RNVC: 2

30 Dec 2010

5340-12-322-2038
Mounting Bracket

123222038
40 0176 439: RNCC: 2 | RNVC: 2
40 0176 439: RNCC: 3 | RNVC: 2
40 0176 439: RNCC: 5 | RNVC: 9

1 Aug 1990

5340-12-370-3133
Manual Control Lever

123703133
1221 2388: RNCC: 3 | RNVC: 2
12212388: RNCC: 5 | RNVC: 2

25 Oct 2006

5340-12-358-8286
Mounting Bracket

123588286
6251.112.082.000: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-381-3882
Swivel Caster

123813882
3480DQR260P65: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-12-305-5638
Double Angle Bracket

123055638
384591: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-308-7617
Electrical-Mechanical Equipment Post

123087617
1281-14400.18: RNCC: 2 | RNVC: 2
159281: RNCC: 3 | RNVC: 2
1281-14400.18: RNCC: 5 | RNVC: 2

14 Nov 1986

5340-12-374-5190
Pad Eye

123745190
L521M1091101: RNCC: 3 | RNVC: 2

21 Feb 2008

5340-12-385-6787
Mounting Bracket

123856787
63538990: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-12-307-7048
Angle Bracket

123077048
RP988610: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-386-7495
Mounting Bracket

123867495
T251M3009229: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-12-341-2009
Nonmetallic Bumper

123412009
251371150604: RNCC: 3 | RNVC: 2
251371150604: RNCC: 5 | RNVC: 2
25 1371 15 06 04: RNCC: 5 | RNVC: 9

8 Aug 1996

5340-12-333-3903
Access Cover

123333903
9108510246: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-12-367-0408
Access Cover

123670408
0000LLTRS5947: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-12-393-6613
Friction Catch

123936613
2312499: RNCC: 3 | RNVC: 2
02312499: RNCC: 5 | RNVC: 2

1 Oct 2013

5340-12-135-7259

5340-12-010-8643

5340-12-360-0748
Butt Hinge Leaf

123600748
9417500251: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-12-300-8806
Dust And Moisture Seal Protective Plug

123008806
62504.002.490: RNCC: 3 | RNVC: 2
V10/131: RNCC: 5 | RNVC: 2

6 Sep 1984

5340-12-372-7121
Buckle

123727121
0013111: RNCC: 3 | RNVC: 2

14 Aug 2007

5340-12-323-5790
Retaining Strap

123235790
54.3050.000.13: RNCC: 2 | RNVC: 2
DIN72573-3X10-ALMGSI1F21-LACK-F9: RNCC: 2 | RNVC: 2
54.3050.000.13: RNCC: 3 | RNVC: 2

10 Dec 1990

5340-12-189-1905
Dust And Moisture Seal Protective Plug

121891905
300F40: RNCC: 3 | RNVC: 2
GPN300F40: RNCC: 5 | RNVC: 2
GPN300F40: RNCC: 5 | RNVC: 2
V30374-68: RNCC: 5 | RNVC: 2
GPN300F40: RNCC: 5 | RNVC: 2
300004000: RNCC: 5 | RNVC: 9
F40GPN300: RNCC: 5 | RNVC: 9
GPN300,F40: RNCC: 5 | RNVC: 9

9 Sep 1981

5340-12-182-9716
Handle Grip

121829716
5801697-01310.00: RNCC: 3 | RNVC: 2
5801697-01310-00: RNCC: 5 | RNVC: 2
5801697-01310.00: RNCC: 5 | RNVC: 9

11 Mar 1980

5340-12-358-6826
Angle Bracket

123586826
2481-391820.007.0: RNCC: 2 | RNVC: 2
2481-391820.007.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-306-7308
Lock-Release Lever

123067308
28.06.206-011: RNCC: 3 | RNVC: 2
286-206-011-000: RNCC: 5 | RNVC: 2

25 Mar 1986

5340-12-359-7168
Handwheel

123597168
GN950.1-GG-125-K14-D: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-320-8569
Mounting Bracket

123208569
2300232-205510.000.0: RNCC: 2 | RNVC: 2
2300232-205510.000.0: RNCC: 3 | RNVC: 2
9997023-205510.000.0: RNCC: 5 | RNVC: 2
2300232-205510.000.02: RNCC: 5 | RNVC: 9

28 Feb 1990

5340-12-184-3350
Mounting Bracket

121843350
100000118: RNCC: 2 | RNVC: 2
100000118: RNCC: 3 | RNVC: 2
5801357-1700.37F: RNCC: 5 | RNVC: 2
5801357-1700-37F: RNCC: 5 | RNVC: 9
5801357-1700-37F: RNCC: 5 | RNVC: 9
5801357-1700.37F: RNCC: 5 | RNVC: 9
5801357-1700-37F: RNCC: 5 | RNVC: 9

17 Jul 1980

5340-12-304-1250
Metal Runner

123041250
5802161-642100.02: RNCC: 2 | RNVC: 2
5802161-642100.02: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-12-319-4490
Mounting Bracket

123194490
2653-182600.00: RNCC: 2 | RNVC: 2
2653-182600.00: RNCC: 3 | RNVC: 2
2653-182600.00: RNCC: 5 | RNVC: 2

3 Oct 1989

5340-12-354-0378
Latch Bar

123540378
DBT442-12: RNCC: 3 | RNVC: 2

29 May 2001

5340-12-302-5190
Butt Hinge

123025190
DIN81402-AL50-MS-P: RNCC: 2 | RNVC: 2

9 Jan 1985

5340-12-313-2414
Mending Plate

123132414
P-146243-405: RNCC: 3 | RNVC: 2
P146243-405: RNCC: 5 | RNVC: 2

12 Mar 1988

5340-12-311-2926
Electrical-Mechanical Equipment Post

123112926
VG95148B6XM3X31,2-NRST: RNCC: 2 | RNVC: 2
VG95148B6XM3X31,2-NRST: RNCC: 3 | RNVC: 2
035 6122 167721: RNCC: 5 | RNVC: 9

13 Aug 1987

5340-12-314-9276
Caster Frame

123149276
932593377: RNCC: 3 | RNVC: 2
1540-220.00.02.001-000: RNCC: 5 | RNVC: 2

27 Aug 1988

5340-12-358-0731
Access Cover

123580731
2300042-255298.000: RNCC: 2 | RNVC: 2
2300042-255298.000: RNCC: 3 | RNVC: 2

10 Sep 2002

5340-12-356-6831
Retaining Clip

123566831
A2827051720000: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-12-339-7653
Helical Compression Spring Seat

123397653
81434315021: RNCC: 3 | RNVC: 2
81.43431.5021: RNCC: 5 | RNVC: 2

15 Jan 1996

5340-12-318-2399
Dust And Moisture Seal Protective Plug

123182399
C196-A10-C19: RNCC: 3 | RNVC: 2

22 Jun 1989

5340-12-702-8883
Mounting Plate

127028883
25-08301118804: RNCC: 2 | RNVC: 2

8 Feb 1996

5340-12-357-2573
Nonmetallic Bumper

123572573
0003234385: RNCC: 3 | RNVC: 2

27 May 2002

5340-12-355-1147
Mounting Bracket

123551147
11584501: RNCC: 3 | RNVC: 2

9 Oct 2001

5340-12-367-0120
Mounting Bracket

123670120
142512N920027: RNCC: 3 | RNVC: 2

29 Jun 2005

5340-12-377-4885
Mending Plate

123774885
133149: RNCC: 3 | RNVC: 2

20 Jan 2009

5340-12-188-6617
Butt Hinge Leaf

121886617
A5.00004.2674: RNCC: 3 | RNVC: 2
50.00.042.674: RNCC: 5 | RNVC: 2
A5000042674: RNCC: 5 | RNVC: 2
50.00.042.674: RNCC: 5 | RNVC: 9

22 Jul 1981

5340-12-347-1370
Mounting Bracket

123471370
54.1094.267.00: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-12-363-0460
Mounting Bracket

123630460
S282M4021101: RNCC: 2 | RNVC: 2
S282M4021101: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-357-6906
Webbing Strap

123576906
T406M3003101: RNCC: 3 | RNVC: 2

15 Jul 2002

5340-12-304-4825
Double Angle Bracket

123044825
2300106-260200.08: RNCC: 2 | RNVC: 2
2300106-260200.08: RNCC: 3 | RNVC: 2
2300106-260200.08: RNCC: 5 | RNVC: 9
2300106-260200.08: RNCC: 5 | RNVC: 9

23 Jul 1985

5340-12-387-9662
Locking Shackle

123879662
0626-242A: RNCC: 3 | RNVC: 2

13 Feb 2012

5340-12-366-2408
Dust And Moisture Seal Boot

123662408
V041N: RNCC: 3 | RNVC: 2

24 Mar 2005

5340-12-343-3762
Resilient Mount

123433762
4220 204 021: RNCC: 3 | RNVC: 2
4220204021: RNCC: 5 | RNVC: 2

12 Jun 1997

5340-12-366-0694
Mounting Bracket

123660694
9438600414: RNCC: 3 | RNVC: 2

4 Mar 2005

5340-12-348-6774
Mounting Bracket

123486774
2300387-700850.010: RNCC: 2 | RNVC: 2
9911474: RNCC: 3 | RNVC: 2
2300387-700850.010: RNCC: 5 | RNVC: 9
9911474: RNCC: 5 | RNVC: 9

4 Aug 1999

5340-12-349-7824
Retaining Strap

123497824
T290M2202260: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-358-6861
Dust And Moisture Seal Protective Plug

123586861
6419970886: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-392-2756
Rim Latch

123922756
DW 410 614 AE: RNCC: 3 | RNVC: 2
DW 410 614 AE: RNCC: 5 | RNVC: 2

23 May 2013

5340-12-095-0124

5340-12-304-5151
Strap Fastener Loop

123045151
01671: RNCC: 3 | RNVC: 2

26 Jul 1985

5340-12-176-4045
Retaining Strap

121764045
LN29836B25: RNCC: 2 | RNVC: 2

27 Nov 1978

5340-12-340-6476
Dust And Moisture Seal Protective Cap

123406476
SKV 1403: RNCC: 3 | RNVC: 2
SKV1403: RNCC: 5 | RNVC: 2

16 May 1996

5340-12-387-5847
Mounting Bracket

123875847
GE5012G063: RNCC: 3 | RNVC: 2

11 Jan 2012

5340-12-168-1144
Vent Plug

121681144
WW 410 005 ER: RNCC: 2 | RNVC: 2
WW 410 005 ER: RNCC: 3 | RNVC: 2
WW 410 005 ER: RNCC: 5 | RNVC: 2
WW 410 005 ER: RNCC: 5 | RNVC: 2
WW410005DR: RNCC: 5 | RNVC: 9
WW410005CR: RNCC: 5 | RNVC: 9
WW410005DR: RNCC: 5 | RNVC: 9
WW410005CR: RNCC: 5 | RNVC: 9
WW410005DR: RNCC: 5 | RNVC: 9
WW 410 005 CR: RNCC: 5 | RNVC: 9

18 Feb 1977

5340-12-328-9518
Clamping Catch

123289518
2653-971013.00: RNCC: 2 | RNVC: 2
2653-971013.00: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-304-0248
Nonmetallic Bumper

123040248
1173100400: RNCC: 3 | RNVC: 2

31 May 1985

5340-12-701-6041
Mounting Bracket

127016041
VG95211-ML-127016041: RNCC: 2 | RNVC: 2
5.12.6602.0050.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-191-0636
Electrical-Mechanical Equipment Post

121910636
65.7091.130.25A001: RNCC: 3 | RNVC: 2
65.7091.130.25-A001: RNCC: 5 | RNVC: 2
167589: RNCC: 5 | RNVC: 2
65-7091-130-25A001: RNCC: 5 | RNVC: 2

11 Jan 1982

5340-12-163-0557
Nonmetallic Bumper

121630557
14021-17014-00: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-347-5763
Metal Grille

123475763
1900626-00700.00: RNCC: 2 | RNVC: 2
1900626-00700.00: RNCC: 3 | RNVC: 2

11 Jan 1999

5340-12-392-4917
Swivel Caster

123924917
LER-TPA 200K-FI: RNCC: 3 | RNVC: 2

13 Jun 2013

5340-12-702-1688
Mounting Plate

127021688
VG95211-ML-127021688: RNCC: 2 | RNVC: 2
30.7101.70: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-143-6651
Expansion Plug

121436651
DIN443-45-ST-PHR: RNCC: 2 | RNVC: 2
45DIN443PHR: RNCC: 5 | RNVC: 2
DIN443-45PHR: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-189-8385
Angle Bracket

121898385
1400057-100000.01: RNCC: 3 | RNVC: 2
1400057-100000.01: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-702-3943
Rod End Connector

127023943
VG95211-ML-127023943: RNCC: 2 | RNVC: 2
5.12.5303.8003.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-324-3286
Quick Release Plunger

123243286
RBN410.2-M8-NIROSTA: RNCC: 3 | RNVC: 2
GN616-M8-SN: RNCC: 3 | RNVC: 2
03055-08: RNCC: 3 | RNVC: 2
NLM3040-08-NIROSTA: RNCC: 5 | RNVC: 9
0745252308: RNCC: 5 | RNVC: 9
304-08-NIROSTA: RNCC: 5 | RNVC: 9
NLM304-08-NIROSTA: RNCC: 5 | RNVC: 9

6 Feb 1991

5340-12-141-7601
Loop Clamp

121417601
DIN3016-G1-136X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-136X15-W1-2: RNCC: 3 | RNVC: 2
SP136/15SKZ: RNCC: 3 | RNVC: 2
1410000136: RNCC: 5 | RNVC: 2
SP136-15SK: RNCC: 5 | RNVC: 2
SP136-15SKZ: RNCC: 5 | RNVC: 2
375-29-016-00: RNCC: 5 | RNVC: 9
VG95931-G136X15-W1: RNCC: 5 | RNVC: 9
VG95931G136X15W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-130-9235
Webbing Strap

121309235
VG95543-B: RNCC: 2 | RNVC: 2
VG95543-AUSF. B: RNCC: 3 | RNVC: 9
BVG95543: RNCC: 5 | RNVC: 2
3909: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-149-8680
Butt Hinge

121498680
25704-190470.01.0: RNCC: 2 | RNVC: 2
25704-190470.01.0: RNCC: 3 | RNVC: 2
25704-190470-01-0: RNCC: 5 | RNVC: 2
25704-190470-01-0: RNCC: 5 | RNVC: 9
25704-190470.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-0454
Mending Plate

121880454
2300109-182100.001.0: RNCC: 2 | RNVC: 2
2300109-182100.001.0: RNCC: 3 | RNVC: 2
2300109-182100.001.0: RNCC: 3 | RNVC: 2
2300109-182100-001-0: RNCC: 5 | RNVC: 2
2300109-182100-001-0: RNCC: 5 | RNVC: 2
2300109-182100-001-0: RNCC: 5 | RNVC: 9
2300109-182100.001.0: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-326-5622
Plug Button

123265622
C30363-A282-C201: RNCC: 3 | RNVC: 2

8 Oct 1991

5340-12-338-3713
Mechanic Equipment Hardware Kit

123383713
VG95211-ML-123383713: RNCC: 2 | RNVC: 2
1AL0086T01: RNCC: 3 | RNVC: 2
1AL0086: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-12-197-7920
Angle Bracket

121977920
A-145203-091: RNCC: 3 | RNVC: 2
A145203-091: RNCC: 5 | RNVC: 2

23 Nov 1983

5340-12-331-8055
Mounting Bracket

123318055
708-144100-000-0: RNCC: 2 | RNVC: 2
708-144100-000-0: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-12-167-2858
Mending Plate

121672858
66.3508.140.03-A001: RNCC: 3 | RNVC: 2
66-3508-140-03A001: RNCC: 5 | RNVC: 9

8 Dec 1976

5340-12-134-0109
Resilient Mount

121340109
27860.NR65.ST: RNCC: 3 | RNVC: 2
27860BSTN6590: RNCC: 3 | RNVC: 2
C22123-Z14-C1: RNCC: 5 | RNVC: 2
C22123Z14C1: RNCC: 5 | RNVC: 2
TFS72-30008: RNCC: 5 | RNVC: 2
27860FJ50: RNCC: 5 | RNVC: 2
27860SM650: RNCC: 5 | RNVC: 2
27860,NR65ST: RNCC: 5 | RNVC: 2
VG95365-A1-NR65ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-342-5658
Nonmetallic Bumper

123425658
4613170012: RNCC: 3 | RNVC: 2
ZR13170012: RNCC: 5 | RNVC: 2
7005-61: RNCC: 5 | RNVC: 2
A 461 317 00 12: RNCC: 5 | RNVC: 9

27 Feb 1997

5340-12-368-6660
Mounting Plate

123686660
2300519-140201.000.0: RNCC: 2 | RNVC: 2
2300519-140201.000.0: RNCC: 3 | RNVC: 2

5 Apr 2006

5340-12-120-8055
Retaining Strap

121208055
DIN72571-1X12-ST-GESCHWAERZT: RNCC: 2 | RNVC: 2
DIN72571-1X12-ST-GESCHWAERZT: RNCC: 3 | RNVC: 2
3381009: RNCC: 5 | RNVC: 2
3381-009: RNCC: 5 | RNVC: 2
DIN72571-1X12-ST-DBL8400: RNCC: 5 | RNVC: 2
1X12DIN72571-ST-GESCHWAERZT: RNCC: 5 | RNVC: 2
072571001012: RNCC: 5 | RNVC: 2
1X12DIN72571 ST DBL8400: RNCC: 5 | RNVC: 2
1X12DIN72571STGESCHWAERZT: RNCC: 5 | RNVC: 2
153-1050: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-7385
Mending Plate

121977385
A-920265-401: RNCC: 3 | RNVC: 2
A920265-401: RNCC: 5 | RNVC: 2

18 Nov 1983

5340-12-701-8052
Rod End Clevis

127018052
VG95211-ML-127018052: RNCC: 2 | RNVC: 2
5.12.8700.1411.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-311-6513
Resilient Mount

123116513
DIN95363-C20X25-NBR55ST: RNCC: 2 | RNVC: 2
81120-20X25-M6.NBR55.ST: RNCC: 5 | RNVC: 2
31658-I-SMX550: RNCC: 5 | RNVC: 2
31658/I/SMX550: RNCC: 5 | RNVC: 2
1.20.25.2.55NBR/ST: RNCC: 5 | RNVC: 2
31658/C-BSOX5590: RNCC: 5 | RNVC: 2
811.020.020.025.06.NBR55.ST: RNCC: 5 | RNVC: 2
31658/I-BSOX5590: RNCC: 5 | RNVC: 2
VG95363-C20X25-NBR55ST: RNCC: 5 | RNVC: 9

1 Oct 1987

5340-12-702-0643
Mounting Bracket

127020643
VG95211-ML-127020643: RNCC: 2 | RNVC: 2
30.0602.766: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-174-3699
Butt Hinge

121743699
VG95552-AE2-80-ST: RNCC: 2 | RNVC: 2
5201-2X5208: RNCC: 3 | RNVC: 2
5201-2X5209: RNCC: 3 | RNVC: 2
VG95552-AE2-80-ST: RNCC: 3 | RNVC: 2
AE2-80VG95552ST: RNCC: 5 | RNVC: 2

26 Jun 1978

5340-12-199-9277
Nonmetallic Bumper

121999277
408-00.08.672-23: RNCC: 3 | RNVC: 2
408-00-08-672-23: RNCC: 5 | RNVC: 9

19 Jun 1984

5340-12-384-9743
Rod End Clevis

123849743
160-88562-01: RNCC: 3 | RNVC: 2
15160-88562.01: RNCC: 5 | RNVC: 2

14 Apr 2011

5340-12-329-0558
Dust And Moisture Seal Protective Plug

123290558
2127-01-03.00: RNCC: 3 | RNVC: 2
2127-01-03.00: RNCC: 3 | RNVC: 2

14 Jul 1992

5340-12-300-1936
Manual Control Handle

123001936
6100128-1500: RNCC: 2 | RNVC: 2
4301619911: RNCC: 3 | RNVC: 2

14 Jul 1984

5340-12-324-6318
Webbing Strap

123246318
79017/026-0650-0120: RNCC: 3 | RNVC: 2
79017/026-650-120: RNCC: 3 | RNVC: 2
79017/026-0650-0120: RNCC: 5 | RNVC: 9
79017/026-650-120: RNCC: 5 | RNVC: 9

8 Mar 1991

5340-12-146-7210
Nonmetallic Bumper

121467210
VG95092B15X9X30X8NR65: RNCC: 2 | RNVC: 2
82200-B15X9X30X8.NR65: RNCC: 3 | RNVC: 2
53256BSTN6590: RNCC: 3 | RNVC: 2
53256,NR65ST: RNCC: 5 | RNVC: 2
VG95092-B15X9X30X8-NR65: RNCC: 5 | RNVC: 2
53256FJ50: RNCC: 5 | RNVC: 2
53256SM650: RNCC: 5 | RNVC: 2
53256FI50: RNCC: 5 | RNVC: 2
VG95092-B15X9X30X8-NR65: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-327-3454
Buckle

123273454
2055-968: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-12-357-2686
Access Cover

123572686
8811400922: RNCC: 2 | RNVC: 2
8811400922: RNCC: 3 | RNVC: 2

28 May 2002

5340-12-331-8193
Butt Hinge Leaf

123318193
7068-21100-009-2: RNCC: 3 | RNVC: 2

24 Jun 1993

5340-12-189-0074
Helical Compression Spring Seat

121890074
81976800019: RNCC: 3 | RNVC: 2
81.97680.0019: RNCC: 5 | RNVC: 2

18 Aug 1981

5340-12-350-3761
Spacing Threaded Standoff

123503761
18H2038: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-12-382-1315
Angle Bracket

123821315
10186-180010.005.0: RNCC: 2 | RNVC: 2
10186-180010.005.0: RNCC: 3 | RNVC: 2

12 May 2010

5340-12-163-5656
Loop Clamp

121635656
LN9490BM40: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-375-2279
Access Cover

123752279
L311M1060221: RNCC: 3 | RNVC: 2

6 May 2008

5340-12-341-4055
Rigid Caster

123414055
3478PVR125P62: RNCC: 3 | RNVC: 2
026176: RNCC: 5 | RNVC: 2

31 Aug 1996

5340-12-354-1880
Mechanic Equipment Hardware Kit

123541880
01493900: RNCC: 3 | RNVC: 2

18 Jun 2001

5340-12-389-1415
Expansion Shield

123891415
050253: RNCC: 3 | RNVC: 2
07402709: RNCC: 5 | RNVC: 2
050253: RNCC: 5 | RNVC: 2
2500602730: RNCC: 5 | RNVC: 2

30 May 2012

5340-12-388-1978
Mounting Plate

123881978
5840980055: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-374-7218
Section Block Clamp

123747218
0008352091: RNCC: 3 | RNVC: 2

11 Mar 2008

5340-12-376-4282
Self-Locking Insert

123764282
000020500: RNCC: 3 | RNVC: 2
205-M10: RNCC: 5 | RNVC: 2

29 Sep 2008

5340-12-307-5791
Mending Plate

123075791
537161-2236.000: RNCC: 3 | RNVC: 2
537161-2236: RNCC: 5 | RNVC: 9
537161-2236.000: RNCC: 5 | RNVC: 9
537161-2236: RNCC: 5 | RNVC: 9

4 Jul 1986

5340-12-301-1286
Double Angle Bracket

123011286
A-243799-039: RNCC: 3 | RNVC: 2
A243799-039: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-312-6979
Dust And Moisture Seal Protective Cap

123126979
3825: RNCC: 3 | RNVC: 2
174-870-0141: RNCC: 5 | RNVC: 2

28 Jan 1988

5340-12-198-2674
Door Button

121982674
23302-183736: RNCC: 2 | RNVC: 2
23302-183736.00: RNCC: 2 | RNVC: 2
2659161: RNCC: 3 | RNVC: 2
4-2659-161: RNCC: 5 | RNVC: 2

6 Jan 1984

5340-12-192-8492
Webbing Strap

121928492
8-4183.00: RNCC: 2 | RNVC: 2
8-4183.00: RNCC: 3 | RNVC: 2
8-4183-00: RNCC: 5 | RNVC: 9
8-4183.00: RNCC: 5 | RNVC: 9
8-4183.00: RNCC: 5 | RNVC: 9
000-A4-25X2,0X850-PE-RAL6031: RNCC: 6 | RNVC: 9

27 May 1982

5340-12-373-9295
Loop Clamp

123739295
JN0529-40: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-12-321-5617
Mounting Plate

123215617
P-886701-407: RNCC: 3 | RNVC: 2
P886701-407: RNCC: 5 | RNVC: 2

1 Jun 1990

5340-12-335-4329
Spacing Threaded Standoff

123354329
VG95148B7XM3X30-NRST: RNCC: 2 | RNVC: 2
VG95148-B7XM3X30-NRST: RNCC: 3 | RNVC: 2
52.9352.102.08: RNCC: 5 | RNVC: 2

18 Aug 1994

5340-12-164-3631
Angle Bracket

121643631
2360-186600.03.0: RNCC: 2 | RNVC: 2
2360-186600.03.0: RNCC: 3 | RNVC: 2
2360-186600-03-0: RNCC: 5 | RNVC: 2
2360-186600.03.0: RNCC: 5 | RNVC: 2
2360-186600-03-0: RNCC: 5 | RNVC: 9
2360-186600.03.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-2451
Loop Clamp

121992451
DIN3016-1-D2-16-16X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D16-16X20-W1-2: RNCC: 3 | RNVC: 2
4219220016: RNCC: 3 | RNVC: 2
RSGU1100-2X16-20: RNCC: 5 | RNVC: 2
RSGU1100.2X16/20: RNCC: 5 | RNVC: 2
0101764: RNCC: 5 | RNVC: 2
DIN3016-D16-16X20-W1-2: RNCC: 5 | RNVC: 9
RSGU1.2X16/20: RNCC: 5 | RNVC: 9
DIN3016-D2-16-16X20-W1-2: RNCC: 5 | RNVC: 9
101764: RNCC: 5 | RNVC: 9

5 Apr 1984

5340-12-144-3291
Retaining Strap

121443291
VG95933DR-10-W1-BK: RNCC: 2 | RNVC: 2
2/1G10MMN325: RNCC: 3 | RNVC: 2
MMN325-2-1G10: RNCC: 5 | RNVC: 2
MMN325-2-1G8-10: RNCC: 5 | RNVC: 2
MMN325-2-1G10: RNCC: 5 | RNVC: 2
MMN325-2-1G8-10: RNCC: 5 | RNVC: 2
2-1G10MMN325: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-353-1069
Mounting Bracket

123531069
529-120808.00.0: RNCC: 3 | RNVC: 2
1111111: RNCC: 5 | RNVC: 2

26 Jan 2001

5340-12-196-9020
Angle Bracket

121969020
A-295125-003: RNCC: 3 | RNVC: 2
A295125-003: RNCC: 5 | RNVC: 2

30 Aug 1983

5340-12-701-4537
Loop Clamp

127014537
VG95211-ML-127014537: RNCC: 2 | RNVC: 2
5.12.5314.1000.59: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5638
Mounting Bracket

127025638
VG95211-ML-127025638: RNCC: 2 | RNVC: 2
5.51.7612.0051.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-174-0919
Retaining Band

121740919
81974605160: RNCC: 3 | RNVC: 2

6 Jun 1978

5340-12-329-7485
Runner

123297485
2300248-80420.05: RNCC: 2 | RNVC: 2
2300248-80420.05: RNCC: 3 | RNVC: 2
2300248-80420.05: RNCC: 5 | RNVC: 2

23 Sep 1992

5340-12-183-2030
Dust And Moisture Seal Protective Cap

121832030
200Z16X20: RNCC: 3 | RNVC: 2
GPN200Z16X20: RNCC: 5 | RNVC: 2
Z16X20GPN200: RNCC: 5 | RNVC: 9
200162000: RNCC: 5 | RNVC: 9
GPN200,Z16X20: RNCC: 5 | RNVC: 9
Z16X20: RNCC: 5 | RNVC: 9

25 Mar 1980

5340-12-173-9834
Flush Lock

121739834
27281: RNCC: 3 | RNVC: 2

26 May 1978

5340-12-348-4338
Plug Button

123484338
29108.200-4: RNCC: 3 | RNVC: 2
29 108.200-4: RNCC: 5 | RNVC: 2

19 Jun 1999

5340-12-358-6969
Mounting Bracket

123586969
2481-395000.001.0: RNCC: 2 | RNVC: 2
2481-395000.001.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-342-5959
Access Door

123425959
2300232-820000.001.0: RNCC: 2 | RNVC: 2

5 Mar 1997

5340-12-701-8082
Mounting Bracket

127018082
5.12.8800.0101.93: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-168-9932
Retaining Strap

121689932
103772701: RNCC: 3 | RNVC: 2
E103772701: RNCC: 5 | RNVC: 9

13 Apr 1977

5340-12-374-2470
Sliding Door Track

123742470
L521M3055101: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-331-5786
Door Handle

123315786
193839206: RNCC: 3 | RNVC: 9

24 May 1993

5340-12-378-3570
Loop Clamp

123783570
41033181: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-339-1453
Double Angle Bracket

123391453
3660724640: RNCC: 3 | RNVC: 2

17 Oct 1995

5340-12-340-3299
Mounting Bracket

123403299
6707430121: RNCC: 3 | RNVC: 2
670 743 01 21: RNCC: 5 | RNVC: 2

26 Mar 1996

5340-12-357-5231
Loop Clamp

123575231
EN4114F40WH1: RNCC: 2 | RNVC: 2

28 Jun 2002

5340-12-177-2518
Angle Bracket

121772518
5801215-171-008: RNCC: 3 | RNVC: 2
5801215-171.008: RNCC: 5 | RNVC: 2

22 Jan 1979

5340-12-352-7165
Mounting Bracket

123527165
5400051-322303.01: RNCC: 2 | RNVC: 2
5400051-322303.01: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-177-2747
Detent Plunger

121772747
5800822-051-011: RNCC: 3 | RNVC: 2
5800822-051.011: RNCC: 5 | RNVC: 2

24 Jan 1979

5340-12-121-0626
Nonmetallic Bumper

121210626
VG95092A3X1X14X8NR50: RNCC: 2 | RNVC: 2
82200-A3X1X14X8.NR50: RNCC: 3 | RNVC: 2
A3X1X14X8.50NR: RNCC: 5 | RNVC: 2
GH702: RNCC: 5 | RNVC: 2
0009879240: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-184-2527
Angle Bracket

121842527
5801352-1300.18: RNCC: 2 | RNVC: 2
5801352-1300.18: RNCC: 3 | RNVC: 2
5801352-1300-18: RNCC: 5 | RNVC: 2
5801352-1300-18: RNCC: 5 | RNVC: 9
5801352-1300-18: RNCC: 5 | RNVC: 9

10 Jul 1980

5340-12-173-8092
Mending Plate

121738092
4531228: RNCC: 3 | RNVC: 2
5801569-400000-004: RNCC: 5 | RNVC: 9
5801569-400000.004: RNCC: 5 | RNVC: 9

16 May 1978

5340-12-362-6208
Plain Solid Disk

123626208
12.7382-01-01-00.00-24: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-183-8699
Butt Hinge Leaf

121838699
5801225-12300: RNCC: 2 | RNVC: 2
5801225-12300: RNCC: 3 | RNVC: 2
5801225-12300: RNCC: 3 | RNVC: 2
5801225-12300: RNCC: 5 | RNVC: 9
5801225-12300: RNCC: 5 | RNVC: 9

29 May 1980

5340-12-340-0327
Spacing Threaded Standoff

123400327
DIN3015-L-AS-1-W4: RNCC: 2 | RNVC: 2
AF-1A-W4: RNCC: 3 | RNVC: 2

16 Feb 1996

5340-12-188-0256
Sealing Plug Assembly

121880256
P-896661-403: RNCC: 3 | RNVC: 2
P896661-403: RNCC: 5 | RNVC: 2

27 May 1981

5340-12-197-0156
Webbing Strap

121970156
79057-1600: RNCC: 3 | RNVC: 2
4900059-111247.000.0: RNCC: 3 | RNVC: 2
01151-1-GLATT-FE1600MM: RNCC: 3 | RNVC: 2
4900059-111247-000-0: RNCC: 5 | RNVC: 2
DIN60060-1-25X1600-C3: RNCC: 5 | RNVC: 9

12 Sep 1983

5340-12-313-0145
Mending Plate

123130145
P-086147-135: RNCC: 3 | RNVC: 2
P086147-135: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-302-2208
Clamping Catch

123022208
P-855352-401: RNCC: 3 | RNVC: 2
P855352-401: RNCC: 5 | RNVC: 2

11 Dec 1984

5340-12-302-6823
Door Handle

123026823
11.009.801-3: RNCC: 3 | RNVC: 2
11-009-801-3: RNCC: 5 | RNVC: 2
11-009-201-3: RNCC: 5 | RNVC: 9
11.009.201-3: RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-189-5453
Lock-Release Lever

121895453
P-895176-001: RNCC: 3 | RNVC: 2
P895176-001: RNCC: 5 | RNVC: 2

5 Oct 1981

5340-12-701-6340
Mounting Plate

127016340
VG95211-ML-127016340: RNCC: 2 | RNVC: 2
5.12.7060.1340.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-2586
Rigid Caster

121872586
S-10146-1: RNCC: 3 | RNVC: 2
10146-01: RNCC: 5 | RNVC: 2

23 Mar 1981

5340-12-188-7117
Access Cover

121887117
32 717-001: RNCC: 3 | RNVC: 2
32717-001: RNCC: 5 | RNVC: 2

27 Jul 1981

5340-12-310-2534
Friction Catch Stud

123102534
V22.917.1-23: RNCC: 3 | RNVC: 2

28 Apr 1987

5340-12-195-6581
Loop Clamp

121956581
DIN3016-2-G1-30X12-W5: RNCC: 2 | RNVC: 2
SP30/12SKZ-W5: RNCC: 3 | RNVC: 2
DIN3016-G1-30X12-W5: RNCC: 3 | RNVC: 2
SP30/12ZY-W5: RNCC: 5 | RNVC: 2
SP30/12ZY-1.4571: RNCC: 5 | RNVC: 2
1310705030: RNCC: 5 | RNVC: 2
SP30-12ZY1-4571: RNCC: 5 | RNVC: 2
VG95931-G30X12-1.4571: RNCC: 5 | RNVC: 9
DIN3016-G1-30X12-W5: RNCC: 5 | RNVC: 9
VG95931-G30X12-W5: RNCC: 5 | RNVC: 9

24 Mar 1983

5340-12-166-5135
Angle Bracket

121665135
2360-069640.01.0: RNCC: 2 | RNVC: 2
2360-069640.01.0: RNCC: 3 | RNVC: 2
2360-069640.01.0: RNCC: 5 | RNVC: 2
2360-069640-01-0: RNCC: 5 | RNVC: 9
2360-069640.01.0: RNCC: 5 | RNVC: 9

16 Sep 1976

5340-12-325-3972
Clamping Catch

123253972
69D4-1A: RNCC: 3 | RNVC: 2

3 Jun 1991

5340-12-384-8811
Retaining Strap

123848811
MMN325-1/2 D9-12-S235JR: RNCC: 3 | RNVC: 2
700325012102: RNCC: 5 | RNVC: 2

6 Apr 2011

5340-12-317-7671
Angle Bracket

123177671
P-297201-485: RNCC: 3 | RNVC: 2
P297201-485: RNCC: 5 | RNVC: 2

11 May 1989

5340-12-139-7034
Butt Hinge Leaf

121397034
REM0101-202: RNCC: 3 | RNVC: 2
REM0101-202: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-330-1630
Mounting Bracket

123301630
537172-2211.000: RNCC: 2 | RNVC: 2
537172-2211.000: RNCC: 3 | RNVC: 2
537172-2211.000: RNCC: 5 | RNVC: 9

10 Nov 1992

5340-12-322-3344
Mounting Bracket

123223344
4603150394: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-702-5408
Angle Bracket

127025408
VG95211-ML-127025408: RNCC: 2 | RNVC: 2
5.51.7208.1710: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-7265
Angle Bracket

127017265
VG95211-ML-127017265: RNCC: 2 | RNVC: 2
5.12.7602.8000.23: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-197-8193
Mending Plate

121978193
1218 7973: RNCC: 3 | RNVC: 2
12187973: RNCC: 5 | RNVC: 9
6-226-0-788-002-4: RNCC: 5 | RNVC: 9
6.226.0.788.002.4: RNCC: 5 | RNVC: 9

24 Nov 1983

5340-12-313-0845
Mending Plate

123130845
P-896357-073: RNCC: 3 | RNVC: 2
P896357-073: RNCC: 5 | RNVC: 2

3 Mar 1988

5340-12-336-9860
Angle Bracket

123369860
81415010323: RNCC: 3 | RNVC: 2
81.41501.0323: RNCC: 5 | RNVC: 2

5 Jan 1995

5340-12-305-0576
Angle Bracket

123050576
A-296712-131: RNCC: 3 | RNVC: 2
A296712-131: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-703-2035
Mounting Bracket

127032035
VG95211-ML-127032035: RNCC: 2 | RNVC: 2
5.12.5105.8060.03: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-362-7371
Mounting Bracket

123627371
BD5.250.736.230: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-12-300-2700
Mending Plate

123002700
A11A121202211: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-044-0572

5340-12-194-2217
Webbing Strap

121942217
23182-7215: RNCC: 2 | RNVC: 2
23182-7215: RNCC: 3 | RNVC: 2
23182-7215: RNCC: 5 | RNVC: 9

12 Oct 1982

5340-12-348-4618
Angle Bracket

123484618
17948750: RNCC: 2 | RNVC: 2
17948750: RNCC: 3 | RNVC: 2
1794-8750: RNCC: 5 | RNVC: 2

24 Jun 1999

5340-12-305-0694
Retaining Strap

123050694
DIN1592-26ZN: RNCC: 2 | RNVC: 2
DIN1592-26ZN: RNCC: 3 | RNVC: 2
DIN1592-26ZN: RNCC: 3 | RNVC: 2
DIN1592-26-ST: RNCC: 5 | RNVC: 2
DIN1592-26ZN: RNCC: 5 | RNVC: 2
DIN1592-26ZN: RNCC: 5 | RNVC: 2
DIN1592-26: RNCC: 5 | RNVC: 9
DIN1592-26: RNCC: 5 | RNVC: 9
DIN1592-26BK: RNCC: 5 | RNVC: 9
26DIN1592: RNCC: 5 | RNVC: 9

24 Sep 1985

5340-12-196-4333
Casement Fastener

121964333
P-855943-005: RNCC: 3 | RNVC: 2
P855943-005: RNCC: 5 | RNVC: 2

6 Jul 1983

5340-12-306-0784
Angle Bracket

123060784
P-244548-752: RNCC: 3 | RNVC: 2
P244548-752: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-342-3279
Dust And Moisture Seal Protective Cap

123423279
582505: RNCC: 3 | RNVC: 2
440441: RNCC: 5 | RNVC: 2
582 505: RNCC: 5 | RNVC: 2

23 Jan 1997

5340-12-361-2135
Fuehrungs- Schiene

123612135
58R104-84: RNCC: 3 | RNVC: 2

4 Sep 2003

5340-12-315-6761
Mounting Bracket

123156761
20446616: RNCC: 3 | RNVC: 2
1.421055: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-352-9056
Handwheel

123529056
E0000252: RNCC: 3 | RNVC: 2
NW50PN16-334N-H-RG-13A: RNCC: 5 | RNVC: 2

4 Jan 2001

5340-12-349-7025
Mounting Plate

123497025
2500238-090700.011.0: RNCC: 2 | RNVC: 2
2500238-090700.011.0: RNCC: 3 | RNVC: 2

27 Dec 1999

5340-12-027-4884

5340-12-094-1563

5340-12-144-4260

5340-12-149-1291
Nonmetallic Bumper

121491291
183: RNCC: 3 | RNVC: 2
183: RNCC: 5 | RNVC: 2
183: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-377-4229
Leather Strap

123774229
4100036-151103.000: RNCC: 2 | RNVC: 2
4100036-151103.000: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-12-330-4345
Spring Loaded Cylinder Fastener

123304345
4900274-113600.00: RNCC: 2 | RNVC: 2
4900274-113600.00: RNCC: 3 | RNVC: 2

15 Dec 1992

5340-12-164-8653
Webbing Strap

121648653
23302-182360: RNCC: 2 | RNVC: 2
23302-182360.00: RNCC: 2 | RNVC: 2
8404075: RNCC: 3 | RNVC: 2
0074087: RNCC: 5 | RNVC: 2
0074-087: RNCC: 5 | RNVC: 2
23302-182360: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-0702
Nonmetallic Bumper

123130702
5803576-201800.00: RNCC: 2 | RNVC: 2
5803576-201800.00: RNCC: 3 | RNVC: 2
5803576-201800.00: RNCC: 5 | RNVC: 9

2 Mar 1988

5340-12-323-4963
Filler Opening Cap

123234963
81.12210.0038: RNCC: 3 | RNVC: 2
FN105-86: RNCC: 5 | RNVC: 2
81122100038: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-702-5987
Loop Clamp

127025987
VG95211-ML-127025987: RNCC: 2 | RNVC: 2
5148A-5: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-387-6259
Mounting Bracket

123876259
9999261-752000.005.0: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-12-702-5392
Angle Bracket

127025392
VG95211-ML-127025392: RNCC: 2 | RNVC: 2
5.51.7204.1641.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-383-9536
Dust And Moisture Seal Protective Cap

123839536
6.395-229.0: RNCC: 3 | RNVC: 2

28 Dec 2010

5340-12-330-1932
Nonmetallic Bumper

123301932
DIN95364-A70X50-M10X25-NR55ST: RNCC: 2 | RNVC: 2
530000-70X50-M10X25.NR55.ST: RNCC: 5 | RNVC: 2
91002-900130: RNCC: 5 | RNVC: 2
VG95364-A70X50-M10X25-NR55ST: RNCC: 5 | RNVC: 9

12 Nov 1992

5340-12-381-5001
Manual Control Lever

123815001
WEW-5838-05: RNCC: 3 | RNVC: 2

24 Feb 2010

5340-12-341-8314
Handle Grip

123418314
11.07370-0016: RNCC: 3 | RNVC: 2
11.07370-0016: RNCC: 5 | RNVC: 2
11.07370-0016: RNCC: 5 | RNVC: 2
F11.07370-0016: RNCC: 5 | RNVC: 2
11.07370-0016: RNCC: 5 | RNVC: 2

31 Oct 1996

5340-12-313-3286
Angle Bracket

123133286
1900037-70-07: RNCC: 2 | RNVC: 2
352853: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-12-152-8896
Loop Clamp

121528896
23114-5717.00: RNCC: 2 | RNVC: 2
23114-5717-00: RNCC: 3 | RNVC: 2
1123371: RNCC: 5 | RNVC: 9
23114-5717-00: RNCC: 5 | RNVC: 9
23114-5717-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-3968
Retaining Strap

121643968
23290-033001.002: RNCC: 2 | RNVC: 2
23290-033001.002: RNCC: 3 | RNVC: 2
4592038361: RNCC: 3 | RNVC: 2
HT09/3891/04: RNCC: 5 | RNVC: 9
23290-033001-002: RNCC: 5 | RNVC: 9
23290-033001.002: RNCC: 5 | RNVC: 9
23290-033001.002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-349-5887
Friction Catch Stud Receptacle

123495887
5803671-201200.02: RNCC: 2 | RNVC: 2
5803671-201200.02: RNCC: 3 | RNVC: 2

7 Dec 1999

5340-12-354-2784
Retaining Strap

123542784
4068 313 249: RNCC: 3 | RNVC: 2

26 Jun 2001

5340-12-190-2383
Detent Plunger

121902383
SB03.02: RNCC: 3 | RNVC: 2
SB03.02: RNCC: 5 | RNVC: 2
SB0302: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-340-9856
Spring Tension Clip

123409856
52.0271.636.01: RNCC: 3 | RNVC: 2

12 Jul 1996

5340-12-305-0720
Nonmetallic Bumper

123050720
4063010041: RNCC: 3 | RNVC: 2

24 Sep 1985

5340-12-336-2532
Resilient Mount

123362532
G3 100-08 S2: RNCC: 3 | RNVC: 2
H95-216-90-120-8-FF: RNCC: 3 | RNVC: 2
Z 13 3018: RNCC: 5 | RNVC: 2
9 00 00 335: RNCC: 5 | RNVC: 2
Z 13-3018 CM2: RNCC: 5 | RNVC: 2
Z 13-3018 CM2: RNCC: 5 | RNVC: 2

4 Nov 1994

5340-12-384-6714
Mechanical Stop

123846714
10187-001140.005.0: RNCC: 2 | RNVC: 2
10187-001140.005.0: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-12-701-6540
Angle Bracket

127016540
VG95211-ML-127016540: RNCC: 2 | RNVC: 2
5.12.7207.8004.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5565
Angle Bracket

127025565
VG95211-ML-127025565: RNCC: 2 | RNVC: 2
5.51.7230.0230.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-195-4951
Loop Clamp

121954951
DIN3016-1-A1-55X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-55X15-W1-2: RNCC: 3 | RNVC: 2
RS1.55/15: RNCC: 3 | RNVC: 2
15210046: RNCC: 5 | RNVC: 2
15210046: RNCC: 5 | RNVC: 2
4110015055: RNCC: 5 | RNVC: 2
RS1100.55/15: RNCC: 5 | RNVC: 2
DIN3016-A1-55X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-A55X15-W1: RNCC: 5 | RNVC: 9

3 Mar 1983

5340-12-339-9522
Nonmetallic Solid Wheel

123399522
8.1512-07.03: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-12-318-0974
Angle Bracket

123180974
140-110000-906-0: RNCC: 3 | RNVC: 2

12 Jun 1989

5340-12-313-0138
Double Angle Bracket

123130138
P-086147-016: RNCC: 3 | RNVC: 2
P086147-016: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-160-1802
Retaining Strap

121601802
DIN72571-1X10-1.4571: RNCC: 2 | RNVC: 2
DIN72571-1X10-1.4571: RNCC: 3 | RNVC: 2
DIN72571-1X10-1.4571: RNCC: 3 | RNVC: 2
1X10DIN72571-1.4436WIRBELSINTERN: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-192-8623
Catch Strike

121928623
603K0607-000-00.3: RNCC: 3 | RNVC: 2
4607430303: RNCC: 5 | RNVC: 2
8724-35: RNCC: 5 | RNVC: 2
ZR07430303: RNCC: 5 | RNVC: 2
603K0607-000-00.3: RNCC: 5 | RNVC: 2
8724-35: RNCC: 5 | RNVC: 9
721 1 66 418 1: RNCC: 5 | RNVC: 9

1 Jun 1982

5340-12-356-5006
Door Button

123565006
200-0430: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-12-365-5834
Angle Bracket

123655834
J28230110-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-300-3162
Dust And Moisture Seal Protective Cap

123003162
YK3374908: RNCC: 3 | RNVC: 2
0171-17-020.004: RNCC: 5 | RNVC: 9
0337 4908: RNCC: 5 | RNVC: 9
3374908EE0171-17: RNCC: 5 | RNVC: 9
0171-17-20-04: RNCC: 5 | RNVC: 9

24 Jul 1984

5340-12-365-5789
Mounting Bracket

123655789
J26130000-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-393-8437
Mounting Bracket

123938437
11.48952-0138: RNCC: 3 | RNVC: 2
11.48952-0138: RNCC: 5 | RNVC: 2

16 Oct 2013

5340-12-190-6851
Lock-Release Lever

121906851
NO PRIMARY REF 12-190-6851: RNCC: 3 | RNVC: 2
6019919903: RNCC: 5 | RNVC: 9
6019 919903: RNCC: 5 | RNVC: 9
25-21004-01: RNCC: 5 | RNVC: 9
25/21004.01: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-194-1975
Hinge Torsion Bar

121941975
490127-32020.04: RNCC: 3 | RNVC: 2
490127-32020-04: RNCC: 5 | RNVC: 2

11 Oct 1982

5340-12-164-4414
Mending Plate

121644414
2360-189300.05.0: RNCC: 2 | RNVC: 2
2360-189300.05.0: RNCC: 3 | RNVC: 2
2360-189300-05-0: RNCC: 5 | RNVC: 2
2360-189300.05.0: RNCC: 5 | RNVC: 2
2360-189300.05.0: RNCC: 5 | RNVC: 9
2360-189300-05-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-042-5787

5340-12-351-5081
Mounting Bracket

123515081
4615200041: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-331-7063
Runner

123317063
121273: RNCC: 3 | RNVC: 2

9 Jun 1993

5340-12-300-6723
Rod End Clevis

123006723
6202600162: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-378-3878
Electronic Equipment Hardware Kit

123783878
5400049-763109.00: RNCC: 2 | RNVC: 2
5400049-763109.00: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-372-6087
Snap-In Plain Standoff

123726087
229.03.626: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-12-197-0536
Dust And Moisture Seal Protective Plug

121970536
7449.0: RNCC: 3 | RNVC: 2

14 Sep 1983

5340-12-319-7498
Lock-Release Lever

123197498
4900059-760316.000.0: RNCC: 3 | RNVC: 2
1282928: RNCC: 5 | RNVC: 2

31 Oct 1989

5340-12-341-4561
Spacing Threaded Standoff

123414561
M391218: RNCC: 3 | RNVC: 9

6 Sep 1996

5340-12-353-7065
Mounting Bracket

123537065
47067915402: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-197-3676
Plug Button

121973676
01TC34229: RNCC: 3 | RNVC: 2

17 Oct 1983

5340-12-341-4179
Electronic Equipment Hardware Kit

123414179
ZU0237 75 0010: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-12-310-3852
Angle Bracket

123103852
2300227-300000.018: RNCC: 2 | RNVC: 2
2300227-300000.018: RNCC: 3 | RNVC: 2

18 May 1987

5340-12-179-7360
Double Angle Bracket

121797360
4256471614: RNCC: 3 | RNVC: 2

25 Jul 1979

5340-12-199-1623
Double Angle Bracket

121991623
6006 300 235: RNCC: 3 | RNVC: 2
6006300235: RNCC: 5 | RNVC: 9

30 Mar 1984

5340-12-313-4405
Mending Plate

123134405
2300279-9800.51: RNCC: 2 | RNVC: 2
2300279-9800.51: RNCC: 3 | RNVC: 2
9876297: RNCC: 5 | RNVC: 9
2300279-9800.51: RNCC: 5 | RNVC: 9

31 Mar 1988

5340-12-702-5467
Mounting Plate

127025467
VG95211-ML-127025467: RNCC: 2 | RNVC: 2
5.51.7211.0080.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-358-3301
Mounting Bracket

123583301
2500262-192700.001.0: RNCC: 2 | RNVC: 2
2500262-192700.001.0: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-12-394-3700
Mounting Bracket

123943700
10165-183200.008.0: RNCC: 2 | RNVC: 2
10165-183200.008.0: RNCC: 3 | RNVC: 2

26 Nov 2013

5340-12-180-6692
Door Button

121806692
CF 446 456 A: RNCC: 2 | RNVC: 2
CF 446 456 A: RNCC: 3 | RNVC: 2
CF 446 456 A: RNCC: 5 | RNVC: 2
CF446456A: RNCC: 5 | RNVC: 2
CF 446 456 A: RNCC: 5 | RNVC: 2
CF446456A: RNCC: 5 | RNVC: 2
CF446456A: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-310-0597
Suction Cup

123100597
326-51-1402-00: RNCC: 3 | RNVC: 2

2 Apr 1987

5340-12-335-3447
Catch Strike

123353447
6700018-201700.05: RNCC: 2 | RNVC: 2
6700018-201700.05: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-12-318-3256
Angle Bracket

123183256
6600015-201.004: RNCC: 3 | RNVC: 2
6600015-201.004: RNCC: 5 | RNVC: 9

30 Jun 1989

5340-12-338-1586
Angle Bracket

123381586
70927-760: RNCC: 3 | RNVC: 2
KB-70927-760: RNCC: 5 | RNVC: 9

30 May 1995

5340-12-147-2024
Retaining Strap

121472024
BSS20X25X3: RNCC: 3 | RNVC: 2
5300000020: RNCC: 5 | RNVC: 2
15300000020: RNCC: 5 | RNVC: 2
01-3-7603-2: RNCC: 5 | RNVC: 9
6-0402-10-5-2025: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-125-0947
Resilient Mount

121250947
NS4.15/26A21-AUSF.C: RNCC: 3 | RNVC: 9
0745-016: RNCC: 5 | RNVC: 2
0745016: RNCC: 5 | RNVC: 2
8406275: RNCC: 5 | RNVC: 2
3263-139E4-240: RNCC: 5 | RNVC: 9
NS4-14-26AAUSFC: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-195-8667
Retaining Strap

121958667
1-108VG85529-1.4571: RNCC: 2 | RNVC: 2

26 Apr 1983

5340-12-370-5676
Nonmetallic Bumper

123705676
9152830124: RNCC: 3 | RNVC: 2
307718: RNCC: 5 | RNVC: 2
467-403/5283-02-15-00: RNCC: 5 | RNVC: 2

22 Nov 2006

5340-12-307-1056
Resilient Mount

123071056
0118039-11MN40: RNCC: 3 | RNVC: 2
0118039-40: RNCC: 5 | RNVC: 2
0118039-40SHORE A: RNCC: 5 | RNVC: 2
0118039.11: RNCC: 5 | RNVC: 2
518114: RNCC: 5 | RNVC: 2

9 May 1986

5340-12-350-1990
Access Cover

123501990
2125-113110.21B: RNCC: 2 | RNVC: 2
2125-113110.21B: RNCC: 3 | RNVC: 2

28 Feb 2000

5340-12-145-6178
Webbing Strap

121456178
23176-262125.00.0: RNCC: 2 | RNVC: 2
82300-23176-262125.00.0: RNCC: 3 | RNVC: 2
23176-262125-00-0: RNCC: 5 | RNVC: 2
23176-262125-00-0: RNCC: 5 | RNVC: 9
23176-262125.00.0: RNCC: 5 | RNVC: 9
82300-B185X30-NBR-ST-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-183-8018
Catch Strike

121838018
NO PRIMARY REF 12-183-8018: RNCC: 3 | RNVC: 2
12746-135-05: RNCC: 5 | RNVC: 9
12746-135.05: RNCC: 5 | RNVC: 9

23 May 1980

5340-12-302-1050
Mending Plate

123021050
20-7210-113: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-12-368-2333
Rod End Clevis

123682333
DIN71752-G6X24-A2L: RNCC: 2 | RNVC: 2

12 Jan 2006

5340-12-701-8474
Loop Clamp

127018474
VG95211-ML-127018474: RNCC: 2 | RNVC: 2
5158A-26: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-363-8122
Access Cover

123638122
1030-00.04.120: RNCC: 3 | RNVC: 2

27 Jul 2004

5340-12-145-9180
Retaining Strap

121459180
DIN72573-2X10-ST-VERZINKT: RNCC: 2 | RNVC: 2
DIN72573-2X10-ST-VERZINKT: RNCC: 3 | RNVC: 2
BSL2X10/72573VPE: RNCC: 3 | RNVC: 2
DIN72573-2X10-ST-VERZINKT: RNCC: 3 | RNVC: 2
2X10DIN72573STVERZINKT: RNCC: 5 | RNVC: 2
DIN72573-2X10-ST-GALZN8: RNCC: 5 | RNVC: 2
DIN72573-2X10-ST-GALZN8: RNCC: 5 | RNVC: 2
2X10DIN72573STVZK: RNCC: 5 | RNVC: 2
5128980210: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-338-8050
Lock-Release Lever

123388050
9892497: RNCC: 3 | RNVC: 9
463-630713.000: RNCC: 5 | RNVC: 9

25 Aug 1995

5340-12-345-0623
Access Cover

123450623
5551880039: RNCC: 3 | RNVC: 2
555 188 00 39: RNCC: 5 | RNVC: 9

27 Jan 1998

5340-12-346-7800
Mounting Bracket

123467800
462-630421.000: RNCC: 3 | RNVC: 9
000373-421000.00: RNCC: 5 | RNVC: 2
462-630421.000: RNCC: 5 | RNVC: 2
9900106: RNCC: 5 | RNVC: 9

10 Sep 1998

5340-12-356-7225
Mounting Plate

123567225
6017881: RNCC: 3 | RNVC: 2
6015.124.70.04.019: RNCC: 5 | RNVC: 9

27 Mar 2002

5340-12-357-8432
Support Hook

123578432
862913401: RNCC: 2 | RNVC: 2
862913401: RNCC: 3 | RNVC: 2

1 Aug 2002

5340-12-394-1534
Manual Control Handle

123941534
869141901: RNCC: 2 | RNVC: 2
869141901: RNCC: 3 | RNVC: 2

7 Nov 2013

5340-12-198-4171
Angle Bracket

121984171
4021860940: RNCC: 3 | RNVC: 2

26 Jan 1984

5340-12-192-7645
Dust And Moisture Seal Protective Cap

121927645
01TC33832: RNCC: 3 | RNVC: 2

19 May 1982

5340-12-349-8122
Angle Bracket

123498122
0044-602100B13B: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-395-4345

5340-12-406-7759

5340-12-350-8933
Mounting Plate

123508933
10063-601000.04: RNCC: 3 | RNVC: 2
10063-601000.04: RNCC: 5 | RNVC: 9

31 May 2000

5340-12-358-8788
Mounting Bracket

123588788
80996050179: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-390-0310
Loop Clamp

123900310
309700: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-309-1054
Access Cover

123091054
54.0026.271.00: RNCC: 3 | RNVC: 2

15 Dec 1986

5340-12-196-6866
Extension Drawer Slide Section

121966866
52.2031.551.00: RNCC: 3 | RNVC: 2

2 Aug 1983

5340-12-375-6466
Cushioning Pad

123756466
9000920A: RNCC: 3 | RNVC: 2

20 Jun 2008

5340-12-307-6339
Butt Hinge Leaf

123076339
A-243833-751: RNCC: 3 | RNVC: 2
A243833-751: RNCC: 5 | RNVC: 2

10 Jul 1986

5340-12-011-4392

5340-12-136-5305

5340-12-318-2026
Access Cover

123182026
213G-80-G1: RNCC: 3 | RNVC: 2

20 Jun 1989

5340-12-335-4423
Mending Plate

123354423
073-450700-901-0: RNCC: 2 | RNVC: 2
073-450700-901-0: RNCC: 3 | RNVC: 2

18 Aug 1994

5340-12-359-9390
Bow Handle

123599390
2500261-850220.000.0: RNCC: 2 | RNVC: 2
2500261-850220.000.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-306-3988
Mending Plate

123063988
V22.917.17-3: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-343-4566
Mounting Plate

123434566
078-230000-901-0: RNCC: 2 | RNVC: 2
078-230000-901-0: RNCC: 3 | RNVC: 2

24 Jun 1997

5340-12-374-5339
Door Stop Chain

123745339
2 0000-574: RNCC: 3 | RNVC: 2
2 0000-574: RNCC: 5 | RNVC: 2

22 Feb 2008

5340-12-340-1259
Loop Clamp

123401259
1202 7898: RNCC: 3 | RNVC: 2
3.602.0.977.041.7: RNCC: 5 | RNVC: 9

1 Mar 1996

5340-12-346-8239
Swivel Caster

123468239
5.031.064.9: RNCC: 3 | RNVC: 2

16 Sep 1998

5340-12-316-2213
Elastic Cord Assembly

123162213
400-822.0000.4: RNCC: 3 | RNVC: 2
101744: RNCC: 5 | RNVC: 2

2 Jan 1989

5340-12-338-5317
Angle Bracket

123385317
2300007-263000.004.0: RNCC: 2 | RNVC: 2
2300007-263000.004.0: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-12-326-4985
Mounting Bracket

123264985
2300232-976100.005.0: RNCC: 2 | RNVC: 2
2300232-976100.005.0: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-12-040-0190

5340-12-384-8274
Mending Plate

123848274
H1.1289-27-14-00.00-04: RNCC: 3 | RNVC: 2

1 Apr 2011

5340-12-305-2852
Door Button

123052852
DIN7463-A1-8ZN: RNCC: 2 | RNVC: 2
007463008001: RNCC: 3 | RNVC: 2

17 Oct 1985

5340-12-166-9391
Resilient Mount

121669391
02493167: RNCC: 3 | RNVC: 2
02491028: RNCC: 5 | RNVC: 2
2491028UD5015-57: RNCC: 5 | RNVC: 2
2493167KZ5015-57: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-12-301-8896
Nonmetallic Solid Wheel

123018896
20-5010-025: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-145-2364
Compression Cup

121452364
T45-11 45X20X10/3-88NBR/101: RNCC: 3 | RNVC: 2
20-007-04: RNCC: 5 | RNVC: 2
T45-11: RNCC: 5 | RNVC: 2
T45-11: RNCC: 5 | RNVC: 2
T45-11-88NBR101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-301-0044
Angle Bracket

123010044
P-296895-013: RNCC: 3 | RNVC: 2
P296895-013: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-197-7691
Angle Bracket

121977691
A-145401-080: RNCC: 3 | RNVC: 2
A145401-080: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-178-5944
Nonmetallic Bumper

121785944
1-213-007-3487: RNCC: 3 | RNVC: 9
0112041: RNCC: 5 | RNVC: 2
112041: RNCC: 5 | RNVC: 9

3 May 1979

5340-12-392-5980
Angle Bracket

123925980
5550920640: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-12-187-5179
Double Angle Bracket

121875179
520.3497: RNCC: 3 | RNVC: 2
5203497: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-369-5059
Mending Plate

123695059
F6126: RNCC: 3 | RNVC: 2

13 Jul 2006

5340-12-333-3068
Rigid Caster

123333068
201496: RNCC: 3 | RNVC: 2
201496: RNCC: 5 | RNVC: 2

23 Nov 1993

5340-12-354-8194
Dust And Moisture Seal Boot

123548194
0000941291: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-094-6309

5340-12-313-0413
An Schloszgarnitur

5340-12-010-4209

5340-12-358-6380
Helical Compression Spring Seat

123586380
201595609: RNCC: 3 | RNVC: 2

31 Oct 2002

5340-12-024-8852

5340-12-041-0644

5340-12-390-7235
Flush Catch

123907235
71185: RNCC: 3 | RNVC: 2
7113056: RNCC: 5 | RNVC: 2

6 Dec 2012

5340-12-199-2746
Retaining Strap

121992746
113301165: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-12-359-9601
Bow Handle

123599601
12670: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-393-7449
Strap Fastener Loop

123937449
3001324: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-12-343-9221
Access Cover

123439221
DA AG 003: RNCC: 3 | RNVC: 2

13 Aug 1997

5340-12-344-5869
Angle Bracket

123445869
78027 61050: RNCC: 2 | RNVC: 2
7802761050: RNCC: 3 | RNVC: 2
78027 61050: RNCC: 5 | RNVC: 9

12 Nov 1997

5340-12-332-5595
Lock-Release Lever

123325595
2300279-9741.01: RNCC: 2 | RNVC: 2
2300279-9741.01: RNCC: 3 | RNVC: 2
2300279-9741.01: RNCC: 5 | RNVC: 9

19 Aug 1993

5340-12-322-9986
Dust And Moisture Seal Protective Cap

123229986
0009888735: RNCC: 3 | RNVC: 9

16 Oct 1990

5340-12-316-8926
Bail Handle

123168926
2300279-9745.02: RNCC: 2 | RNVC: 2
2300279-9745.02: RNCC: 3 | RNVC: 2
9876312: RNCC: 5 | RNVC: 9
2300279-9745.02: RNCC: 5 | RNVC: 9

22 Feb 1989

5340-12-197-3876
Door Holder

121973876
3097400016: RNCC: 3 | RNVC: 2

18 Oct 1983

5340-12-190-0444
Retaining Strap

121900444
5D20493: RNCC: 3 | RNVC: 2
5D20493: RNCC: 5 | RNVC: 2
5D20493: RNCC: 5 | RNVC: 2

4 Nov 1981

5340-12-302-6888
Detent Plunger

123026888
1064890: RNCC: 3 | RNVC: 2
064890: RNCC: 5 | RNVC: 9

23 Jan 1985

5340-12-188-3863
Leather Strap

121883863
81968015033: RNCC: 3 | RNVC: 2
81.96801.5033: RNCC: 5 | RNVC: 2

6 Jul 1981

5340-12-391-0482
Mortise Lock

123910482
089019: RNCC: 3 | RNVC: 2

18 Jan 2013

5340-12-357-8909
Angle Bracket

123578909
2300042-255290.002: RNCC: 2 | RNVC: 2
2300042-255290.002: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-12-320-9199
Access Cover

123209199
2000520057: RNCC: 3 | RNVC: 2
0298 5130: RNCC: 5 | RNVC: 2

6 Mar 1990

5340-12-193-8732
Mending Plate

121938732
5548240: RNCC: 3 | RNVC: 2
554.8240: RNCC: 5 | RNVC: 2

8 Sep 1982

5340-12-360-0987
Mounting Bracket

123600987
9424290568: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-389-3251
Retaining Strap

123893251
04099100.1003: RNCC: 3 | RNVC: 2

21 Jun 2012

5340-12-360-1303
Mounting Bracket

123601303
9424601235: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-385-6974
Webbing Strap

123856974
4100036-330323.000.0: RNCC: 2 | RNVC: 2
4100036-330323.000.0: RNCC: 3 | RNVC: 2

30 Jun 2011

5340-12-313-6985
Mounting Bracket

123136985
6100109-2300.02: RNCC: 2 | RNVC: 2
6100109-2300.02: RNCC: 3 | RNVC: 2
6100109-2300.02: RNCC: 5 | RNVC: 2

27 Apr 1988

5340-12-340-0624
Door Holder

123400624
0.83.0012.0: RNCC: 3 | RNVC: 2
0.83.012.0: RNCC: 5 | RNVC: 2

22 Feb 1996

5340-12-322-2212
Headless Straight Rod

123222212
287.10.13.5: RNCC: 3 | RNVC: 9
28710135: RNCC: 5 | RNVC: 9

2 Aug 1990

5340-12-337-7690
Plug Button

123377690
4606830022: RNCC: 3 | RNVC: 2
721 1 81 023 1: RNCC: 3 | RNVC: 9
S 721 1 81 023 1: RNCC: 5 | RNVC: 9

10 Apr 1995

5340-12-357-5925
Mounting Bracket

123575925
2500261-991413.000.0: RNCC: 2 | RNVC: 2
2500261-991413.000.0: RNCC: 3 | RNVC: 2

4 Jul 2002

5340-12-381-9748
Angle Bracket

123819748
10186-180010.003.0: RNCC: 2 | RNVC: 2
10186-180010.003.0: RNCC: 3 | RNVC: 2

22 Apr 2010

5340-12-364-4351
Mounting Bracket

123644351
2300262-970174.000.0: RNCC: 2 | RNVC: 2
2300262-970174.000.0: RNCC: 3 | RNVC: 2
1899687: RNCC: 5 | RNVC: 2

25 Sep 2004

5340-12-186-0420
Expansion Shield

121860420
7-25: RNCC: 3 | RNVC: 9
00110007: RNCC: 5 | RNVC: 9

25 Nov 1980

5340-12-145-2806
Snap Hook

121452806
05054-85/130MMNI: RNCC: 3 | RNVC: 2
2345-14843-05: RNCC: 5 | RNVC: 2
2345-14843-05: RNCC: 5 | RNVC: 9
5054-140: RNCC: 5 | RNVC: 9
5054-90/140 VERNICKELT: RNCC: 5 | RNVC: 9
R5054-90/140 VERNICKELT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-333-6493
Spacing Threaded Standoff

123336493
VG95148C5XM2,5X8-NRST: RNCC: 2 | RNVC: 2
C41107-A465-C35: RNCC: 3 | RNVC: 2

18 Jan 1994

5340-12-336-9962
Retaining Band

123369962
81974605247: RNCC: 3 | RNVC: 2
81.97460-5247: RNCC: 5 | RNVC: 2

9 Jan 1995

5340-12-362-2721
Loop Clamp

123622721
J92228271-401: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-350-3843
Section Block Clamp

123503843
J29120356-003: RNCC: 3 | RNVC: 2

23 Mar 2000

5340-12-352-2201
Pad Eye

123522201
VG95211-ML-123522201: RNCC: 2 | RNVC: 2
160-88434: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-302-3601
Access Cover

123023601
0289 4807: RNCC: 3 | RNVC: 2
2894807: RNCC: 5 | RNVC: 2
2894807KZ0704-01: RNCC: 5 | RNVC: 2

19 Dec 1984

5340-12-370-1763
Retaining Strap

123701763
9XB136202-005: RNCC: 3 | RNVC: 2
0734508: RNCC: 5 | RNVC: 2

27 Sep 2006

5340-12-348-8858
Mounting Bracket

123488858
245/7346-46-12-00: RNCC: 3 | RNVC: 2

31 Aug 1999

5340-12-179-8464
Angle Bracket

121798464
5800828-135121-025: RNCC: 3 | RNVC: 2
5800828-135121.025: RNCC: 5 | RNVC: 2
5800828-135121-025: RNCC: 5 | RNVC: 9
5800828-135121.025: RNCC: 5 | RNVC: 9

3 Aug 1979

5340-12-178-1904
Clamping Catch

121781904
709191-0000.000: RNCC: 3 | RNVC: 2
709189: RNCC: 5 | RNVC: 2
709189-0000.000: RNCC: 5 | RNVC: 2
709191: RNCC: 5 | RNVC: 2
1200054-05111: RNCC: 5 | RNVC: 9

26 Mar 1979

5340-12-344-4277
Angle Bracket

123444277
P-297350-007: RNCC: 3 | RNVC: 2
P297350-007: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-301-1306
Angle Bracket

123011306
P-295641-005: RNCC: 3 | RNVC: 2
P295641-005: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-701-3077
Rod End Connector

127013077
VG95211-ML-127013077: RNCC: 2 | RNVC: 2
5.12.5101.6490.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-301-1649
Double Angle Bracket

123011649
A-243825-017: RNCC: 3 | RNVC: 2
A243825-017: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-191-9038
Spring Tension Clip

121919038
C106-A46-C48: RNCC: 3 | RNVC: 2
C106A46C48: RNCC: 5 | RNVC: 9

16 Mar 1982

5340-12-382-7104
Bow Handle

123827104
GN565-20-112-SW: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-12-353-6876
Multiple Angle Bracket

123536876
J92222555-401: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-375-8856
Access Cover

123758856
F1.1697-00-03-10.00-30: RNCC: 3 | RNVC: 2
H45208: RNCC: 5 | RNVC: 2

16 Jul 2008

5340-12-175-7456
Nonmetallic Bumper

121757456
VG95092B7,5X3,5X20X4X10NR60-SW: RNCC: 2 | RNVC: 2
44A,SCHWARZ: RNCC: 3 | RNVC: 2
ART.-NR.44A,SCHWARZ: RNCC: 3 | RNVC: 2
82200-B7,5X3,5X20X4X10.NR60-SW: RNCC: 3 | RNVC: 2
1819807063: RNCC: 5 | RNVC: 2
44ASCHWARZ: RNCC: 5 | RNVC: 2
44A: RNCC: 5 | RNVC: 9

16 Oct 1978

5340-12-179-0709
Manual Control Handle

121790709
2300061-183200.001: RNCC: 2 | RNVC: 2
2300061-183200.001: RNCC: 3 | RNVC: 2
2300061-183200-001: RNCC: 5 | RNVC: 9
2300061-183200.001: RNCC: 5 | RNVC: 9

6 Jun 1979

5340-12-702-4624
Lock-Release Lever

127024624
VG95211-ML-127024624: RNCC: 2 | RNVC: 2
5.51.0603.1130.92: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-341-7479
Threaded Rod End

123417479
2500255-320200.02.0: RNCC: 2 | RNVC: 2
2500255-320200.02.0: RNCC: 3 | RNVC: 2

23 Oct 1996

5340-12-318-6995
Lock-Release Lever

123186995
6132.988.4: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-12-338-5529
Angle Bracket

123385529
4900059-760300.005.0: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-12-340-1976
Loop Clamp

123401976
2300232-992060.000.0: RNCC: 2 | RNVC: 2
2300232-992060.000.0: RNCC: 3 | RNVC: 2

13 Mar 1996

5340-12-357-3821
Mounting Plate

123573821
925954 3007: RNCC: 3 | RNVC: 2

14 Jun 2002

5340-12-359-0360
Expansion Plug

123590360
0009975720: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-12-359-1875
Mechanical Stop

123591875
4656 306 078: RNCC: 3 | RNVC: 2
331020A1: RNCC: 5 | RNVC: 2

8 Jan 2003

5340-12-378-5937
Mounting Bracket

123785937
9272824000: RNCC: 3 | RNVC: 2

23 Apr 2009

5340-12-356-7852
Block Clamp

5340-12-181-0464
Friction Catch

121810464
81971166019: RNCC: 3 | RNVC: 2

19 Oct 1979

5340-12-193-3984
Dust And Moisture Seal Protective Cap

121933984
01TC34235: RNCC: 3 | RNVC: 2

19 Jul 1982

5340-12-702-1622
Retaining Strap

127021622
VG95211-ML-127021622: RNCC: 2 | RNVC: 2
30.6601.20: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-331-2439
Mending Plate

123312439
1201000358: RNCC: 3 | RNVC: 2
467-418/5183-03-00-06: RNCC: 5 | RNVC: 2

7 Apr 1993

5340-12-042-4697

5340-12-165-4506
Nonmetallic Bumper

121654506
112-120: RNCC: 3 | RNVC: 2

8 May 1976

5340-12-090-6500

5340-12-362-2765
Loop Clamp

123622765
1206 8473: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-134-7115

5340-12-701-9679
Mounting Bracket

127019679
VG95211-ML-127019679: RNCC: 2 | RNVC: 2
01.7211.5345: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-313-8004
Angle Bracket

123138004
5801441-30901.001: RNCC: 2 | RNVC: 2
5801441-30901.001: RNCC: 3 | RNVC: 2
5801441-30901.001: RNCC: 5 | RNVC: 9

6 May 1988

5340-12-136-3601
Hand Crank

121363601
1008296: RNCC: 3 | RNVC: 2
B9-38.004-01.3: RNCC: 5 | RNVC: 2
1929-17040: RNCC: 5 | RNVC: 9
89-38.004-01.3: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-7333
Mounting Bracket

127017333
VG95211-ML-127017333: RNCC: 2 | RNVC: 2
5.12.7608.2370.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-318-5699
Mending Plate

123185699
52.2851.100.19: RNCC: 3 | RNVC: 2
52-2851-100-19: RNCC: 5 | RNVC: 2

28 Jul 1989

5340-12-358-7382
Runner

123587382
2481-391700.002.0: RNCC: 2 | RNVC: 2
2481-391700.002.0: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-377-4104
Runner

123774104
8605059.1.100.02: RNCC: 3 | RNVC: 2

14 Jan 2009

5340-12-365-3725
Mounting Bracket

123653725
2300109-970485.001.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-332-4111
Mounting Plate

123324111
0851 7753.033: RNCC: 3 | RNVC: 2
0851 7564.027: RNCC: 5 | RNVC: 2
8517753FA T.33: RNCC: 5 | RNVC: 9
8517564FA T.27: RNCC: 5 | RNVC: 9

9 Aug 1993

5340-12-300-8191
Double Angle Bracket

123008191
1423-910.56(4): RNCC: 3 | RNVC: 2

1 Sep 1984

5340-12-358-6459
Angle Bracket

123586459
2800-394240.004.0: RNCC: 2 | RNVC: 2
2800-394240.004.0: RNCC: 3 | RNVC: 2

31 Oct 2002

5340-12-021-8769

5340-12-355-4500
Angle Bracket

123554500
5311.002.4: RNCC: 3 | RNVC: 2

16 Nov 2001

5340-12-391-3494
Permanent Magnet

123913494
SK996-970210.000.0: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-12-303-9492
Resilient Mount

123039492
6100127-0000.03: RNCC: 2 | RNVC: 2
8798990138: RNCC: 3 | RNVC: 2
8798990138: RNCC: 5 | RNVC: 9
8798990138: RNCC: 5 | RNVC: 9

23 May 1985

5340-12-310-8946
Loop Clamp

123108946
LN9491A6: RNCC: 2 | RNVC: 2

7 Jul 1987

5340-12-356-1751
Angle Bracket

123561751
ED41-0900-00215-122: RNCC: 2 | RNVC: 2
ED41-0900-00215-122: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-154-1980
Nut And Bolt Locking Plate

121541980
100355-513000.09: RNCC: 2 | RNVC: 2
100355-513000.09: RNCC: 3 | RNVC: 2
100355-513000-09: RNCC: 5 | RNVC: 2
100355-513000-09: RNCC: 5 | RNVC: 9
100355-513000-09: RNCC: 5 | RNVC: 9
100355-513000.09: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-343-4371
Mending Plate

123434371
200443: RNCC: 3 | RNVC: 2
200443 24K03-0084-00.017: RNCC: 5 | RNVC: 2

20 Jun 1997

5340-12-172-7041
Mending Plate

121727041
1224-209.12: RNCC: 2 | RNVC: 2
532008-0181.000: RNCC: 3 | RNVC: 2
532008-181: RNCC: 5 | RNVC: 9
1224-209.12: RNCC: 5 | RNVC: 9
532008-181: RNCC: 5 | RNVC: 9
532008-0181.000: RNCC: 5 | RNVC: 9
1224-209-12: RNCC: 5 | RNVC: 9

13 Feb 1978

5340-12-337-1542
Access Cover

123371542
0B615.62-00-00-10-000: RNCC: 3 | RNVC: 2

26 Jan 1995

5340-12-370-4957
Lock-Release Lever

123704957
GN501-80-M10-SW: RNCC: 3 | RNVC: 2
GN501-80-V8-SW: RNCC: 5 | RNVC: 2
TS-3783-001-25: RNCC: 5 | RNVC: 2

14 Nov 2006

5340-12-197-3973
Mending Plate

121973973
NO PRIMARY REF 12-197-3973: RNCC: 3 | RNVC: 2
25X6DIN82242: RNCC: 5 | RNVC: 9
DIN82242-25X6: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-374-2625
Sliding Door Hanger

123742625
L521M3842101: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-381-6880
Dust And Moisture Seal Protective Cap

123816880
310326006H: RNCC: 3 | RNVC: 2

18 Mar 2010

5340-12-356-7482
Angle Bracket

123567482
T622M1301205: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-337-8112
Angle Bracket

123378112
460 889 14 14: RNCC: 3 | RNVC: 2
4608891414: RNCC: 5 | RNVC: 2

18 Apr 1995

5340-12-317-2831
Dust And Moisture Seal Protective Cap

123172831
16 235 013: RNCC: 3 | RNVC: 2
8466828: RNCC: 3 | RNVC: 2
1793605: RNCC: 5 | RNVC: 2

23 Mar 1989

5340-12-383-6469
Antipilferage Seal

123836469
2420580009: RNCC: 3 | RNVC: 2

18 Nov 2010

5340-12-390-6851
Headless Straight Rod

123906851
81668070050: RNCC: 3 | RNVC: 2
81.66807-0050: RNCC: 5 | RNVC: 2

4 Dec 2012

5340-12-330-3628
Lock-Release Lever

123303628
GN300-108-M12-SW: RNCC: 3 | RNVC: 2
5041200001: RNCC: 3 | RNVC: 2
RBN942-E30XM12SCHWARZ: RNCC: 3 | RNVC: 2
0141200001: RNCC: 3 | RNVC: 2
06450-4121: RNCC: 3 | RNVC: 2
025275: RNCC: 5 | RNVC: 2
NLM645.412SCHWARZ: RNCC: 5 | RNVC: 9
NLM6450-412SCHWARZ: RNCC: 5 | RNVC: 9
NLM-641.1512-SCHWARZ: RNCC: 5 | RNVC: 9

5 Dec 1992

5340-12-346-6474
Webbing Strap

123466474
2300088-104152.00: RNCC: 2 | RNVC: 2
2300088-104152.00: RNCC: 3 | RNVC: 2
9844632: RNCC: 5 | RNVC: 2
2300088-104152.00: RNCC: 5 | RNVC: 9
9844632: RNCC: 5 | RNVC: 9

20 Aug 1998

5340-12-190-5745
Nonmetallic Bumper

121905745
5800145-112.07: RNCC: 2 | RNVC: 2
5800145-112.07: RNCC: 3 | RNVC: 2

7 Dec 1981

5340-12-332-5479
Spacing Threaded Standoff

123325479
1361235-16060-02: RNCC: 3 | RNVC: 2

19 Aug 1993

5340-12-180-6819
Retaining Strap

121806819
5800748-11.128: RNCC: 3 | RNVC: 2
5800748-11-128: RNCC: 5 | RNVC: 9

26 Sep 1979

5340-12-321-0099
Clamping Catch

123210099
NO PRIMARY REF 12-321-0099: RNCC: 3 | RNVC: 2
AW7100.072: RNCC: 5 | RNVC: 9

16 Mar 1990

5340-12-380-5090
Loop Clamp

123805090
588.20-001001-00: RNCC: 3 | RNVC: 2
00609766: RNCC: 5 | RNVC: 2

4 Nov 2009

5340-12-386-0344
Mounting Plate

123860344
2004833: RNCC: 3 | RNVC: 2
SK913-110000.004.0: RNCC: 5 | RNVC: 2
4617540011: RNCC: 5 | RNVC: 2

2 Aug 2011

5340-12-170-9889
Handwheel

121709889
H070-4-6300: RNCC: 3 | RNVC: 2
81.97001-0249: RNCC: 5 | RNVC: 2
81970010249: RNCC: 5 | RNVC: 2

29 Aug 1977

5340-12-302-8915
Webbing Strap

123028915
TK-BA23-5340-013: RNCC: 2 | RNVC: 2
A 1301-410MM: RNCC: 3 | RNVC: 2
Z 1512 TEIL4: RNCC: 5 | RNVC: 2

6 Feb 1985

5340-12-309-1300
Extension Drawer Slide

123091300
5012RN9-3/4IN: RNCC: 3 | RNVC: 2

17 Dec 1986

5340-12-328-9252
Nonmetallic Bumper

123289252
8403.8200.01: RNCC: 3 | RNVC: 2
8403-8200-01: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-359-4346
Loop Clamp

123594346
DIN3016-1-D1-18X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-393-5708
Mechanical Stop

123935708
4100098-722020.003.0: RNCC: 2 | RNVC: 2
4100098-722020.003.0: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-371-0968
Nut And Bolt Locking Plate

123710968
2 0000-613: RNCC: 3 | RNVC: 2
2 0000-613: RNCC: 5 | RNVC: 2

8 Feb 2007

5340-12-350-8575
Angle Bracket

123508575
J92228169-001: RNCC: 3 | RNVC: 2

30 May 2000

5340-12-091-4889

5340-12-326-4974
Kunst Gleitschiene

123264974
5801984-981110.010.0: RNCC: 2 | RNVC: 2
5801984-981110.010.0: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-12-190-4228
Pad Eye

121904228
1421034031: RNCC: 3 | RNVC: 2
1 421 034 031: RNCC: 5 | RNVC: 2

25 Nov 1981

5340-12-701-5278
Mounting Bracket

127015278
5.12.6102.376.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-388-3547
Multiple Angle Bracket

123883547
1556385: RNCC: 3 | RNVC: 2

14 Mar 2012

5340-12-301-1256
Electronic Equipment Hardware Kit

123011256
5802017-600252.00: RNCC: 2 | RNVC: 2
5802017-600252.00: RNCC: 3 | RNVC: 2
5802017-600252.00: RNCC: 3 | RNVC: 2

22 Sep 1984

5340-12-367-9697
Mounting Bracket

123679697
31482-6.640: RNCC: 3 | RNVC: 2

13 Nov 2005

5340-12-192-6106
Double Angle Bracket

121926106
632-773000.03.0: RNCC: 3 | RNVC: 2
632-773000-03-0: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-164-4219
Hand Carrying Strap Assembly

121644219
NO PRIMARY REF 12-164-4219: RNCC: 3 | RNVC: 2
40062190101: RNCC: 5 | RNVC: 2
62-190101: RNCC: 5 | RNVC: 2
4 0062 190 101: RNCC: 5 | RNVC: 2
359/72465/2: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-358-7961
Mounting Bracket

123587961
J0433105D127-001A0-056: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-314-4803
Mounting Bracket

123144803
S01-101013: RNCC: 3 | RNVC: 2

12 Jul 1988

5340-12-122-4522
Spring Tension Clip

121224522
3045460175: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-318-5830
Spring Tension Clip

123185830
10SXN59: RNCC: 3 | RNVC: 2
10SXN59: RNCC: 5 | RNVC: 2
9559000010: RNCC: 5 | RNVC: 2
01000182: RNCC: 5 | RNVC: 2
18621: RNCC: 5 | RNVC: 2

31 Jul 1989

5340-12-302-2602
Nonmetallic Bumper

123022602
1748 201 000: RNCC: 3 | RNVC: 2
0008910501: RNCC: 5 | RNVC: 2
1748201000: RNCC: 5 | RNVC: 2

12 Dec 1984

5340-12-386-3333
Mechanical Stop

123863333
50.000.166: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-393-4757
Dust And Moisture Seal Protective Cap

123934757
GPN200Z12X16-RAL3000: RNCC: 3 | RNVC: 2
200-Z12X16: RNCC: 5 | RNVC: 1
200Z12X16-RAL3000: RNCC: 5 | RNVC: 2
9610054610: RNCC: 5 | RNVC: 2
GPN200Z12X16-RAL3000: RNCC: 5 | RNVC: 2

18 Sep 2013

5340-12-316-6214
Mending Plate

123166214
000251-000000.01: RNCC: 3 | RNVC: 2
000253-000000.01: RNCC: 5 | RNVC: 2
000251-000000.01: RNCC: 5 | RNVC: 9

27 Jan 1989

5340-12-361-3346
Mounting Bracket

123613346
51173105142: RNCC: 3 | RNVC: 2
51.17310-5142: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-329-7958
Lock-Release Lever

123297958
GN6337.3-25-M10-50-N: RNCC: 3 | RNVC: 2

30 Sep 1992

5340-12-185-0333
Butt Hinge Leaf

121850333
F01-240140-18-0: RNCC: 3 | RNVC: 2

4 Sep 1980

5340-12-177-6636
Nonmetallic Bumper

121776636
105-23509.15: RNCC: 3 | RNVC: 2
105-23509-15: RNCC: 5 | RNVC: 2

12 Feb 1979

5340-12-367-2151
Dust And Moisture Seal Protective Cover

123672151
JN1123ER3: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-12-349-8064
Manual Control Lever

123498064
32 72 1 240 792: RNCC: 3 | RNVC: 2

11 Jan 2000

5340-12-194-1033
Resilient Mount

121941033
281199201B: RNCC: 3 | RNVC: 2

4 Oct 1982

5340-12-372-5174
Dust And Moisture Seal Protective Cover

123725174
10021061: RNCC: 3 | RNVC: 2

24 Jul 2007

5340-12-370-6339
Swivel Caster

123706339
32VTIP100P06: RNCC: 3 | RNVC: 2
3662ITP100P62: RNCC: 5 | RNVC: 9

4 Dec 2006

5340-12-374-4383
Bumper

123744383
9999880211: RNCC: 3 | RNVC: 2
999 988 02 11: RNCC: 5 | RNVC: 2

18 Feb 2008

5340-12-010-2957

5340-12-090-1088

5340-12-128-0156

5340-12-375-1344
Angle Bracket

123751344
L792M3028206: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-372-6986
Nonmetallic Bumper

123726986
D4075093: RNCC: 3 | RNVC: 2

14 Aug 2007

5340-12-364-2628
Double Angle Bracket

123642628
4256870412: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-323-7406
Expansion Shield

123237406
53264: RNCC: 3 | RNVC: 2
FU8X50: RNCC: 3 | RNVC: 2

12 Dec 1990

5340-12-377-7165
Hand Crank

123777165
2397001-MG: RNCC: 3 | RNVC: 2

5 Feb 2009

5340-12-325-0793
Access Cover

123250793
35632204: RNCC: 3 | RNVC: 2
66.3518.240.01-A001: RNCC: 3 | RNVC: 2

30 Apr 1991

5340-12-337-7751
Mounting Plate

123377751
201236: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-12-306-0139
Double Angle Bracket

123060139
2661901: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-361-4340
Retaining Strap

123614340
1504308: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-171-2391
Webbing Strap

121712391
CF 311 671: RNCC: 2 | RNVC: 2
CF 311 671: RNCC: 3 | RNVC: 2
CF 311 671: RNCC: 5 | RNVC: 2
CF311671: RNCC: 5 | RNVC: 2
CF311671: RNCC: 5 | RNVC: 2
CF311671: RNCC: 5 | RNVC: 2
CF 311 671: RNCC: 5 | RNVC: 2

21 Sep 1977

5340-12-313-1074
Electrical-Mechanical Equipment Post

123131074
4023R-712100.03: RNCC: 2 | RNVC: 2
4023R-712100.03: RNCC: 3 | RNVC: 2

4 Mar 1988

5340-12-381-9258
Webbing Strap

123819258
000692-216300.00: RNCC: 2 | RNVC: 2

19 Apr 2010

5340-12-346-0132
Spring Tension Clip

123460132
020 111 070: RNCC: 3 | RNVC: 2

29 May 1998

Load More Results