What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 141 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 141 of 178

5340-12-386-5920
Mounting Bracket

123865920
T251M3009234: RNCC: 3 | RNVC: 2

14 Sep 2011

5340-12-024-9703

5340-12-702-2451
Angle Bracket

127022451
VG95211-ML-127022451: RNCC: 2 | RNVC: 2
30.7800.20: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-327-2003
Handle Grip

123272003
73440-01: RNCC: 3 | RNVC: 2

16 Dec 1991

5340-12-386-9368
Clamping Catch

123869368
591.174 AS: RNCC: 3 | RNVC: 2
591.174-AS: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-12-356-6827
Mechanical Stop

123566827
J04532277-003: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-12-155-4750
Spring Tension Clip

121554750
160-73060-01: RNCC: 3 | RNVC: 2
160-73060-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-6180
Blank Panel

123566180
SNP:SY-F1609E1-P: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-360-8659
Mounting Bracket

123608659
2500306-197800.000.0: RNCC: 3 | RNVC: 2

17 Jul 2003

5340-12-315-6907
Access Cover

123156907
1250 313 190: RNCC: 3 | RNVC: 2
000 264 46 11: RNCC: 5 | RNVC: 2
0002644611: RNCC: 5 | RNVC: 2
1250313190: RNCC: 5 | RNVC: 9

19 Nov 1988

5340-12-703-3210
Mounting Bracket

127033210
VG95211-ML-127033210: RNCC: 2 | RNVC: 2
5.12.6113.8470.00: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-156-5489
Spring Tension Clip

121565489
42161-27600.06: RNCC: 3 | RNVC: 2
42161-27600-06: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-9692
Mounting Bracket

127019692
VG95211-ML-127019692: RNCC: 2 | RNVC: 2
01.7701.7620: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-301-3993
Retaining Strap

123013993
23110-1900.23: RNCC: 2 | RNVC: 2
23110-1900.23: RNCC: 3 | RNVC: 2
23110-1900-23: RNCC: 5 | RNVC: 9
23110-1900.23: RNCC: 5 | RNVC: 9
23110-1900-23: RNCC: 5 | RNVC: 9
23110-1900.23: RNCC: 5 | RNVC: 9

11 Oct 1984

5340-12-177-0749
Mounting Bracket

121770749
5801215-091-003: RNCC: 3 | RNVC: 2
5801215-091.003: RNCC: 5 | RNVC: 2

12 Jan 1979

5340-12-196-5560
Angle Bracket

121965560
2300039-069630.01.0: RNCC: 2 | RNVC: 2
2300039-069630.01.0: RNCC: 3 | RNVC: 2
2300039-069630-01-0: RNCC: 5 | RNVC: 9

18 Jul 1983

5340-12-702-1828
Retaining Strap

127021828
VG95211-ML-127021828: RNCC: 2 | RNVC: 2
30.7206.1030: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-342-9306
Helical Compression Spring Retainer

123429306
5011-190: RNCC: 3 | RNVC: 2

16 Apr 1997

5340-12-197-5897
Retaining Strap

121975897
DIN72573-4X12-ST-ZN: RNCC: 2 | RNVC: 2
DIN72573-4X12-ST-ZN: RNCC: 3 | RNVC: 2
DIN72573-4X12-ST: RNCC: 5 | RNVC: 9
4X12DIN72573-ST: RNCC: 5 | RNVC: 9
4X12DIN72573ST: RNCC: 5 | RNVC: 9
DIN72573-4X12-ST: RNCC: 5 | RNVC: 9

7 Nov 1983

5340-12-348-9865
Mechanical Stop

123489865
245/7346-42-00-04: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-183-2755
Electrical-Mechanical Equipment Post

121832755
536056-0400.000: RNCC: 3 | RNVC: 2
CF417720A: RNCC: 3 | RNVC: 2
CF 417 720 A: RNCC: 5 | RNVC: 2
CF417720A: RNCC: 5 | RNVC: 2
CF 417 720 A: RNCC: 5 | RNVC: 2
CF417720A: RNCC: 5 | RNVC: 2
CF 417 720 A: RNCC: 5 | RNVC: 2
536056-0400.000: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-12-356-1926
Butt Hinge Leaf

123561926
ED41-1310-00032-045: RNCC: 2 | RNVC: 2
ED41-1310-00032-045: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-12-314-3267
Lock-Release Lever

123143267
0130800001: RNCC: 3 | RNVC: 2
06410-3081: RNCC: 3 | RNVC: 2
01 308000 01: RNCC: 5 | RNVC: 2
NLM6410-3081: RNCC: 5 | RNVC: 9
641.1308RAL9005: RNCC: 5 | RNVC: 9
NLM-641.1308SCHWARZ: RNCC: 5 | RNVC: 9
NLM641-3081: RNCC: 5 | RNVC: 9

25 Jun 1988

5340-12-702-7014
Nonmetallic Bumper

127027014
25-08301000494: RNCC: 2 | RNVC: 2

4 Dec 1995

5340-12-163-2941
Retaining Strap

121632941
23290-013003.006: RNCC: 2 | RNVC: 2
23290-013003.006: RNCC: 3 | RNVC: 2
23290-013003-006: RNCC: 5 | RNVC: 9
23290-013003.006: RNCC: 5 | RNVC: 9
23290-013003.006: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-4719
Mounting Bracket

127014719
VG95211-ML-127014719: RNCC: 2 | RNVC: 2
5.12.5314.8310.09: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-173-6299
Friction Catch

121736299
C42145A32B19: RNCC: 3 | RNVC: 2
C42145-A32-B19: RNCC: 5 | RNVC: 2

26 Apr 1978

5340-12-701-5096
Mounting Bracket

127015096
VG95211-ML-127015096: RNCC: 2 | RNVC: 2
5.12.6100.0730.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-360-2694
Mounting Bracket

123602694
J52424538-003: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-12-312-9966
Nut And Bolt Locking Plate

123129966
403164-00: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-12-372-2344
Double Angle Bracket

123722344
4538348-001: RNCC: 3 | RNVC: 2
4538348-001: RNCC: 5 | RNVC: 2

29 Jun 2007

5340-12-333-2184
Nonmetallic Bumper

123332184
3786.7001: RNCC: 3 | RNVC: 2
3.786.7001: RNCC: 5 | RNVC: 2
37867001: RNCC: 5 | RNVC: 2

11 Nov 1993

5340-12-333-9455
Butt Hinge

123339455
3.50.0208.0: RNCC: 3 | RNVC: 2
3.50.208.0: RNCC: 5 | RNVC: 2
3.50.208.0: RNCC: 5 | RNVC: 2

25 Feb 1994

5340-12-334-0120
Double Angle Bracket

123340120
4603530040: RNCC: 3 | RNVC: 2
S 721 1 31 122 1: RNCC: 3 | RNVC: 9

8 Mar 1994

5340-12-325-7636
Loop Clamp

123257636
211.03.18.001.2: RNCC: 3 | RNVC: 2
211.03.18.001: RNCC: 5 | RNVC: 2
211.03.18.001.1: RNCC: 5 | RNVC: 2
211.03.18.001: RNCC: 5 | RNVC: 2
211.03.18.001.1: RNCC: 5 | RNVC: 2
211.03.18.001.2: RNCC: 5 | RNVC: 2

5 Jul 1991

5340-12-313-8226
Cane Bolt

123138226
3.0098: RNCC: 3 | RNVC: 2

10 May 1988

5340-12-196-5581
Loop Clamp

121965581
423 107 350 4: RNCC: 3 | RNVC: 2
4231073504: RNCC: 5 | RNVC: 2
0693000: RNCC: 5 | RNVC: 2
693000: RNCC: 5 | RNVC: 9

18 Jul 1983

5340-12-338-5239
Retaining Clamp Assembly

123385239
25704-270981.00.0: RNCC: 2 | RNVC: 2
25704-270981.00.0: RNCC: 3 | RNVC: 2

24 Jul 1995

5340-12-366-7350
Mounting Bracket

123667350
187404308: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-12-345-2837
Butt Hinge

123452837
1602-208200.000.0: RNCC: 2 | RNVC: 2
1602-208200.000.0: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-12-331-2042
Dust And Moisture Seal Protective Plug

123312042
0637 900 027: RNCC: 3 | RNVC: 2

1 Apr 1993

5340-12-329-5185
Angle Bracket

123295185
4615450140: RNCC: 3 | RNVC: 2
721 2 85 028 1: RNCC: 5 | RNVC: 9

26 Aug 1992

5340-12-701-3785
Mounting Plate

127013785
5.12.5305.0957.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-327-7880
Angle Bracket

123277880
068253283A: RNCC: 3 | RNVC: 2
068 253 283 A: RNCC: 5 | RNVC: 2

5 Mar 1992

5340-12-371-2991
Flush Lock

123712991
3101-0001: RNCC: 2 | RNVC: 2
3101-0001: RNCC: 3 | RNVC: 2

12 Mar 2007

5340-12-154-0272
Butt Hinge Leaf

121540272
52.3046.100.02: RNCC: 3 | RNVC: 2
52-3046-100-02: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-8181
Manual Control Handle

121968181
270101: RNCC: 3 | RNVC: 2
589025: RNCC: 3 | RNVC: 2
5-861-0005: RNCC: 5 | RNVC: 2
3922-0014-589025: RNCC: 5 | RNVC: 2
A14NAN2257: RNCC: 5 | RNVC: 2
A14NAN2257: RNCC: 5 | RNVC: 2
8098345: RNCC: 5 | RNVC: 2
H54422: RNCC: 5 | RNVC: 2
704006114: RNCC: 5 | RNVC: 9
270101: RNCC: 5 | RNVC: 9

22 Aug 1983

5340-12-165-8310
Mending Plate

121658310
2360-189373.02.0: RNCC: 2 | RNVC: 2
2360-189373.02.0: RNCC: 3 | RNVC: 2
2360-189373-02-0: RNCC: 5 | RNVC: 2
2360-189373.02.0: RNCC: 5 | RNVC: 2
2360-189373-02-0: RNCC: 5 | RNVC: 9
2360-189373.02.0: RNCC: 5 | RNVC: 9

2 Jul 1976

5340-12-313-8789
Bow Handle

123138789
VG95149B40X20-M3-AL-FB: RNCC: 2 | RNVC: 2
10501-001: RNCC: 3 | RNVC: 2
5L.3731.001.35: RNCC: 5 | RNVC: 2
VG95149B40X20-M3-A-FB: RNCC: 5 | RNVC: 9

17 May 1988

5340-12-340-2752
Nonmetallic Solid Wheel

123402752
50020662: RNCC: 3 | RNVC: 2
50020662: RNCC: 5 | RNVC: 9

20 Mar 1996

5340-12-316-0073
Mounting Bracket

123160073
54.0046.910.00: RNCC: 3 | RNVC: 2

14 Dec 1988

5340-12-360-8343
Dust And Moisture Seal Protective Plug

123608343
78350 11138: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-12-361-0011
Lock Bolt

123610011
61766: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-129-2541

5340-12-346-6236
Mounting Bracket

123466236
2712.1200: RNCC: 3 | RNVC: 2

18 Aug 1998

5340-12-393-3079
Strapping Seal

123933079
17413: RNCC: 3 | RNVC: 2
517 797: RNCC: 5 | RNVC: 2

5 Sep 2013

5340-12-360-3502
Mounting Plate

123603502
0009185804: RNCC: 3 | RNVC: 2
0009185804: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-198-7634
Rubber Bumper

121987634
253843675: RNCC: 3 | RNVC: 9

23 Feb 1984

5340-12-352-3045
Mounting Bracket

123523045
554701: RNCC: 3 | RNVC: 9

7 Nov 2000

5340-12-010-8478

5340-12-327-5035
Nonmetallic Bumper

123275035
586075079: RNCC: 3 | RNVC: 2

28 Jan 1992

5340-12-349-6246
Loop Clamp

123496246
2025GR: RNCC: 3 | RNVC: 2

9 Dec 1999

5340-12-192-3934
Loop Clamp

121923934
PAN4231GHC5927: RNCC: 3 | RNVC: 2

20 Apr 1982

5340-12-362-8021
Mounting Plate

123628021
10020923: RNCC: 3 | RNVC: 2

2 Apr 2004

5340-12-199-0797
Mending Plate

121990797
3828910241: RNCC: 3 | RNVC: 2

23 Mar 1984

5340-12-392-4158
Mounting Bracket

123924158
I001880TAN686A: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-12-184-2515
Webbing Strap

121842515
265841387: RNCC: 3 | RNVC: 2

10 Jul 1980

5340-12-178-2322
Helical Compression Spring Seat

121782322
3173230167: RNCC: 3 | RNVC: 2

9 Apr 1979

5340-12-157-8897
Cremone Bolt

121578897
VG75121: RNCC: 4 | RNVC: 1
VG75121AOBEN1061UNTEN642: RNCC: 5 | RNVC: 2
AVDA751210BEN1061UNTEN642: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-2945
Rod End Clevis

123162945
5183810: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-198-6878
Loop Clamp

121986878
0059979190: RNCC: 3 | RNVC: 2
8935116504: RNCC: 3 | RNVC: 2
0039977890: RNCC: 5 | RNVC: 9
0039975890: RNCC: 5 | RNVC: 9

17 Feb 1984

5340-12-385-5032
Mounting Bracket

123855032
X00014083: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-12-191-5835
Angle Bracket

121915835
4604280840: RNCC: 3 | RNVC: 2

15 Feb 1982

5340-12-354-3154
Retaining Strap

123543154
1149950320: RNCC: 3 | RNVC: 2
114 995 03 20: RNCC: 5 | RNVC: 2

29 Jun 2001

5340-12-388-6736
Catch Strike

123886736
600649: RNCC: 3 | RNVC: 2
600P0302-100-00.3: RNCC: 5 | RNVC: 2

12 Apr 2012

5340-12-701-6561
Mounting Plate

127016561
VG95211-ML-127016561: RNCC: 2 | RNVC: 2
5.12.7208.3392.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-198-7216
Support Hook

121987216
5801998-410000.03: RNCC: 2 | RNVC: 2
5801998-410000.03: RNCC: 3 | RNVC: 2

22 Feb 1984

5340-12-329-6647
Loop Clamp

123296647
DIN3015-LD-3R-22-PP-W1: RNCC: 2 | RNVC: 2
SM322DP-AS: RNCC: 3 | RNVC: 2
SM322PP-DP-AS: RNCC: 3 | RNVC: 2
RAPR12-322: RNCC: 3 | RNVC: 2
RAPR12-322: RNCC: 5 | RNVC: 2

16 Sep 1992

5340-12-329-6347
Angle Bracket

123296347
7068-15200-025-2: RNCC: 3 | RNVC: 2

11 Sep 1992

5340-12-303-2215
Webbing Strap

123032215
5802017-708203.00: RNCC: 2 | RNVC: 2
221-00-381-3-2-12-021: RNCC: 3 | RNVC: 2
2-12-021: RNCC: 3 | RNVC: 2
5802017-708203.00: RNCC: 3 | RNVC: 2
65.7789.400.12-A003: RNCC: 3 | RNVC: 2
5802017-708203.00: RNCC: 5 | RNVC: 2
2-12-021: RNCC: 5 | RNVC: 9
221-00-381-3-2-12-021: RNCC: 5 | RNVC: 9

7 Mar 1985

5340-12-301-2271
Dust And Moisture Seal Protective Cap

123012271
5.52008.061/0500: RNCC: 3 | RNVC: 2

28 Sep 1984

5340-12-178-1495
Mounting Bracket

121781495
064030: RNCC: 3 | RNVC: 2
07229-00: RNCC: 5 | RNVC: 2
6403: RNCC: 5 | RNVC: 2

22 Mar 1979

5340-12-307-9407
Mending Plate

123079407
5801434-511000.05: RNCC: 2 | RNVC: 2
7800541005: RNCC: 3 | RNVC: 2
78005 41005: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-156-8480
Turnbuckle

121568480
1393002-11200: RNCC: 2 | RNVC: 2
87.04.03.00000.0016: RNCC: 3 | RNVC: 2
1393002-11200: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-335-3199
Catch Strike

123353199
2277-100000A12B: RNCC: 3 | RNVC: 2

9 Aug 1994

5340-12-314-2865
Dust And Moisture Seal Protective Cap

123142865
LP032-5-74: RNCC: 3 | RNVC: 2
K30806-2: RNCC: 5 | RNVC: 2

23 Jun 1988

5340-12-377-6094
Extension Drawer Slide

123776094
DZ3307-0020KT: RNCC: 3 | RNVC: 2
54.1318.100.02: RNCC: 5 | RNVC: 2
DZ 3307-0020KT: RNCC: 5 | RNVC: 2

28 Jan 2009

5340-12-361-8331
Access Cover

123618331
110.01.032.000-00: RNCC: 3 | RNVC: 2

21 Nov 2003

5340-12-324-9976
Webbing Strap

123249976
79017/026-1500-200: RNCC: 3 | RNVC: 2
79017/026-1500-0200: RNCC: 3 | RNVC: 2
79017/026-1500-0200: RNCC: 5 | RNVC: 9

22 Apr 1991

5340-12-122-6383
Nonmetallic Bumper

121226383
VG95092-A3X1,5X14X5-PUR50: RNCC: 2 | RNVC: 2
VG95092-A3X1,5X14X5-PUR50: RNCC: 3 | RNVC: 2
0009873040: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-155-8590
Electrical-Mechanical Equipment Post

121558590
65-7058-121-02: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-199-5586
Butt Hinge

121995586
DIN7954-C30-ST-BK: RNCC: 2 | RNVC: 2
C30DIN7954: RNCC: 5 | RNVC: 2

11 May 1984

5340-12-700-1920
Manual Control Handle

127001920
51-260444024: RNCC: 2 | RNVC: 2
765-17-SB314: RNCC: 3 | RNVC: 2

4 Nov 1991

5340-12-318-7369
Hand Crank

123187369
0223 4039: RNCC: 3 | RNVC: 2
02234039KZ0141-42: RNCC: 5 | RNVC: 2
223.4039: RNCC: 5 | RNVC: 2

11 Aug 1989

5340-12-701-1919
Mounting Bracket

127011919
VG95211-ML-127011919: RNCC: 2 | RNVC: 2
5.12.0430.4440.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-308-2972
Loop Clamp

123082972
2300223-183000.02.0: RNCC: 2 | RNVC: 2
2300223-183000.02.0: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-700-9058
Angle Bracket

127009058
VG95211-ML-127009058: RNCC: 2 | RNVC: 2
2.11.7602.8130.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-4777
Mounting Bracket

127014777
VG95211-ML-127014777: RNCC: 2 | RNVC: 2
5.12.5811.1220.04: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-310-4426
Suction Cup

123104426
P-405403-405-26H-001-55: RNCC: 3 | RNVC: 2

22 May 1987

5340-12-362-2767
Double Angle Bracket

123622767
1873-015020.000.0: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-322-4977
Mounting Bracket

123224977
7-602-0150-000-01POS50: RNCC: 3 | RNVC: 2

27 Aug 1990

5340-12-370-2365
Dust And Moisture Seal Protective Cap-Plug

123702365
SPF 09.5XXX/L/VR/JE/SP NACH N01-: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-12-196-9517
Double Angle Bracket

121969517
P-234130-407: RNCC: 3 | RNVC: 2
P234130-407: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-358-0331
Access Door Hinge

123580331
2500262-191540.000.0: RNCC: 2 | RNVC: 2
2500262-191540.000.0: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-12-340-2044
Dust And Moisture Seal Protective Plug

123402044
105.060.8 GRUEN: RNCC: 3 | RNVC: 2
371 422: RNCC: 5 | RNVC: 2
700 904: RNCC: 5 | RNVC: 2
700.904: RNCC: 5 | RNVC: 2

13 Mar 1996

5340-12-700-8316
Antipilferage Seal Locking Wire

127008316
1,5-12CH18N9T-P-M: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-322-3519
Lock-Release Lever

123223519
2300264-261140.00.0: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-12-338-9648
Access Cover

123389648
8 695 520 735: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-12-358-6026
Mounting Plate

123586026
5412300242: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-358-0085
Rod End Clevis

123580085
TA3005P005: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-197-7303
Access Cover

121977303
4113501: RNCC: 3 | RNVC: 2

18 Nov 1983

5340-12-361-0767
Angle Bracket

123610767
A1Z10294194: RNCC: 2 | RNVC: 2
A1Z10294194: RNCC: 3 | RNVC: 2
10294194: RNCC: 5 | RNVC: 2

19 Aug 2003

5340-12-361-0893
Door Button

123610893
62710248: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-364-1458
Escutcheon Plate

123641458
211888: RNCC: 3 | RNVC: 2

25 Aug 2004

5340-12-369-8775
Manual Control Lever

123698775
61056: RNCC: 3 | RNVC: 2

23 Aug 2006

5340-12-369-2300
Angle Bracket

123692300
03693611: RNCC: 3 | RNVC: 2

7 Jun 2006

5340-12-350-4448
Spacing Threaded Standoff

123504448
12200701: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-312-0562
Angle Bracket

123120562
600711843: RNCC: 3 | RNVC: 2
81.38140.0007: RNCC: 5 | RNVC: 2
81381400007: RNCC: 5 | RNVC: 2

13 Nov 1987

5340-12-309-7773
Access Cover

123097773
5058889: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-391-4662
Mounting Bracket

123914662
I010849: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-025-8945

5340-12-185-0009
Halter

121850009
F01-213210-02-0: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-12-334-4544
Mending Plate

123344544
702-241910-903-0: RNCC: 3 | RNVC: 2

10 May 1994

5340-12-156-6030
Casement Fastener

121566030
0.250112.3/0.25.0543.0: RNCC: 3 | RNVC: 2
2104-4K911: RNCC: 5 | RNVC: 1
1-6899-15-1-6756-35: RNCC: 5 | RNVC: 9
15-1-6756-35: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-349-5860
Access Cover

123495860
U60.281000.10-00: RNCC: 3 | RNVC: 2

7 Dec 1999

5340-12-344-4232
Mounting Bracket

123444232
A-616743-033: RNCC: 3 | RNVC: 2
A616743-033: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-322-9620
Synchro Clamp

123229620
230120: RNCC: 3 | RNVC: 9
1865-010330.00.0: RNCC: 3 | RNVC: 9

11 Oct 1990

5340-12-365-2540
Butt Hinge Leaf

123652540
2500267-000312.000.0: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-12-152-1399
Ball Socket Seat

121521399
12786-100-42-0: RNCC: 2 | RNVC: 2
12786-100-42-0: RNCC: 3 | RNVC: 2
12786-100-42-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-9470
Butt Hinge Leaf

121969470
4900059-751211.000.0: RNCC: 3 | RNVC: 2
4900059-751211-000-0: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-198-0473
Mending Plate

121980473
A-243758-753: RNCC: 3 | RNVC: 2
A243758-753: RNCC: 5 | RNVC: 2

14 Dec 1983

5340-12-196-3527
Angle Bracket

121963527
P-855017-005: RNCC: 3 | RNVC: 2
P855017-005: RNCC: 5 | RNVC: 2

29 Jun 1983

5340-12-310-2813
Mending Plate

123102813
S35444-02-6-157: RNCC: 3 | RNVC: 2

5 May 1987

5340-12-329-5149
Access Cover

123295149
307.900-10043.00: RNCC: 3 | RNVC: 2

26 Aug 1992

5340-12-353-8594
Angle Bracket

123538594
J92220314-001: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-186-5857
Nonmetallic Bumper

121865857
C22156-A1000-C21: RNCC: 3 | RNVC: 2
C22099A47C529: RNCC: 5 | RNVC: 2
C22099-A47-C529: RNCC: 5 | RNVC: 9
C22156A1000C21: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-12-174-5140
Helical Compression Spring Retainer

121745140
1241-3005.001: RNCC: 2 | RNVC: 2
1241-3005.001: RNCC: 3 | RNVC: 2
1241-3005-001: RNCC: 5 | RNVC: 2
1241-3005-001: RNCC: 5 | RNVC: 9

5 Jul 1978

5340-12-321-0848
Mounting Plate

123210848
5802102-201121.01: RNCC: 2 | RNVC: 2
5802102-201121.01: RNCC: 5 | RNVC: 9

26 Mar 1990

5340-12-354-3178
Retaining Bail

123543178
2300387-151313.000: RNCC: 2 | RNVC: 2
2300387-151313.000: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-12-702-1028
Mounting Bracket

127021028
VG95211-ML-127021028: RNCC: 2 | RNVC: 2
30.5313.21: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-323-8789
Mounting Bracket

123238789
E3-2003830: RNCC: 3 | RNVC: 2
E3-2003830: RNCC: 5 | RNVC: 9

3 Jan 1991

5340-12-347-1834
Mounting Bracket

123471834
54.1094.205.00: RNCC: 3 | RNVC: 2

10 Nov 1998

5340-12-380-3402
Flare Lock Fastener

123803402
3099900192: RNCC: 3 | RNVC: 2

21 Oct 2009

5340-12-346-1892
Mounting Bracket

123461892
WRYUG3413: RNCC: 3 | RNVC: 2

24 Jun 1998

5340-12-134-5352

5340-12-183-6336
Mending Plate

121836336
02485670: RNCC: 3 | RNVC: 2
2485670EE5051-56: RNCC: 5 | RNVC: 2

6 May 1980

5340-12-325-4174
Angle Bracket

123254174
211.03.04.011.2: RNCC: 3 | RNVC: 2
211.03.04.011: RNCC: 5 | RNVC: 2
211.03.04.011: RNCC: 5 | RNVC: 2
211.03.04.011.2: RNCC: 5 | RNVC: 2

5 Jun 1991

5340-12-352-4964
Retaining Strap

123524964
521910-820370.000.0: RNCC: 2 | RNVC: 2
521910-820370.000.0: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-12-334-3533
Mounting Plate

123343533
CF 833 398 A: RNCC: 2 | RNVC: 2
CF 833 398 A: RNCC: 3 | RNVC: 2

29 Apr 1994

5340-12-323-8222
Mending Plate

123238222
2903957M1: RNCC: 3 | RNVC: 2
395 910 251: RNCC: 5 | RNVC: 2

20 Dec 1990

5340-12-380-4542
Double Angle Bracket

123804542
X52208200009: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-329-4630
Manual Control Handle

123294630
2963 060 M1: RNCC: 3 | RNVC: 2
309 967 117: RNCC: 5 | RNVC: 2

21 Aug 1992

5340-12-343-9679
Access Cover

123439679
536519-8823.000: RNCC: 2 | RNVC: 2
536519-8823.000: RNCC: 3 | RNVC: 2

20 Aug 1997

5340-12-368-1304
Multiple Angle Bracket

123681304
J29120115-004: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-359-2149
Angle Bracket

123592149
J21520051-401: RNCC: 3 | RNVC: 2

13 Jan 2003

5340-12-381-9672
Mounting Plate

123819672
33067-008-003: RNCC: 3 | RNVC: 2

21 Apr 2010

5340-12-170-2509
Section Block Clamp

121702509
PAN4272-10: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-370-4627
Swivel Caster

123704627
87-401.00-00.00-06: RNCC: 3 | RNVC: 2

9 Nov 2006

5340-12-190-4484
Rigid Caster

121904484
SK-EK-0252.040.03: RNCC: 3 | RNVC: 2
SKEK0252-040-03: RNCC: 5 | RNVC: 2

26 Nov 1981

5340-12-173-5471
Resilient Mount

121735471
208515010025: RNCC: 3 | RNVC: 2
520000-20X26-M6.PETROBEN45.ST: RNCC: 3 | RNVC: 2
208515010025: RNCC: 5 | RNVC: 2

19 Apr 1978

5340-12-356-8453
Angle Bracket

123568453
ED88-0100-01001-133: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-184-7185
Nonmetallic Bumper

121847185
VG95092B40X30PUR60: RNCC: 2 | RNVC: 2
82200-B40X30.PUR60: RNCC: 3 | RNVC: 2
261829577A: RNCC: 3 | RNVC: 2
2601: RNCC: 3 | RNVC: 2
B40X30.60PUR: RNCC: 5 | RNVC: 2
VG95092 B40X30 PUR60: RNCC: 5 | RNVC: 2

14 Aug 1980

5340-12-199-6031
Bail Handle

121996031
1.63.0654.0: RNCC: 3 | RNVC: 2
1.63. 654.0: RNCC: 5 | RNVC: 2
404/70X70-4: RNCC: 5 | RNVC: 2

16 May 1984

5340-12-318-2432
Angle Bracket

123182432
1421389002: RNCC: 3 | RNVC: 2
0000760236: RNCC: 5 | RNVC: 2
1 421 389 002: RNCC: 5 | RNVC: 2

22 Jun 1989

5340-12-175-5788
Bow Handle

121755788
WW 405 890 A: RNCC: 2 | RNVC: 2
WW 405 890 A: RNCC: 3 | RNVC: 9
WW 405 890 A: RNCC: 5 | RNVC: 2
WW405890A: RNCC: 5 | RNVC: 2
WW405890A: RNCC: 5 | RNVC: 9

3 Oct 1978

5340-12-345-3755
Plug Button

123453755
81619620044: RNCC: 3 | RNVC: 2
24046: RNCC: 5 | RNVC: 2

10 Mar 1998

5340-12-172-5262
Strap Hinge

121725262
5054STZC: RNCC: 3 | RNVC: 2

23 Jan 1978

5340-12-191-8960
Resilient Mount

121918960
PAN5175T03: RNCC: 3 | RNVC: 2

16 Mar 1982

5340-12-359-7363
Mounting Bracket

123597363
S282M2028101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-321-1610
Rigid Caster

123211610
TKW RHL025.101: RNCC: 3 | RNVC: 2

6 Apr 1990

5340-12-359-5531
Nonmetallic Bumper

123595531
A1Z10287777: RNCC: 3 | RNVC: 2
10287777: RNCC: 5 | RNVC: 2

17 Feb 2003

5340-12-390-6367
Access Cover

123906367
2300458-940410.000: RNCC: 2 | RNVC: 2
2300458-940410.000: RNCC: 3 | RNVC: 2
9932300: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-12-178-0454
Retaining Strap

121780454
3129951020: RNCC: 3 | RNVC: 2

16 Mar 1979

5340-12-351-2339
Mounting Bracket

123512339
222776-3001: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-349-7263
Mounting Bracket

123497263
46632313607: RNCC: 3 | RNVC: 2
2313607: RNCC: 5 | RNVC: 2
46 63 2 313 607: RNCC: 5 | RNVC: 9

3 Jan 2000

5340-12-385-4349
Double Angle Bracket

123854349
5561752241: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-145-1943

5340-12-373-8253
Bow Handle

123738253
06916-140082: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-12-180-4704
Mounting Bracket

121804704
3875460144: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-135-6521

5340-12-314-5444
Angle Bracket

123145444
4254264240: RNCC: 3 | RNVC: 2
425 426 42 40: RNCC: 5 | RNVC: 2
A4254264240: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-176-9979
Resilient Mount

121769979
331923424: RNCC: 3 | RNVC: 2
331923424: RNCC: 3 | RNVC: 2
23424: RNCC: 5 | RNVC: 2
331923424: RNCC: 5 | RNVC: 2

3 Jan 1979

5340-12-360-9224
Loop Clamp

123609224
62640159: RNCC: 3 | RNVC: 2

24 Jul 2003

5340-12-357-3294
Dust And Moisture Seal Protective Plug

123573294
0005456280: RNCC: 3 | RNVC: 2

7 Jun 2002

5340-12-372-4991
Mortise Lock

123724991
10060035: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-12-337-0302
Access Cover

123370302
52.0277.172.00: RNCC: 3 | RNVC: 2

12 Jan 1995

5340-12-356-5607
Bow Handle

123565607
23113D: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-12-390-7109
Block Clamp

123907109
80.312.01418.703: RNCC: 3 | RNVC: 2
80.312.01418.703: RNCC: 5 | RNVC: 2

5 Dec 2012

5340-12-382-6902
Catch Strike

123826902
7294.063: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-12-363-2919
Mechanic Equipment Hardware Kit

123632919
599.076.006.002: RNCC: 3 | RNVC: 2
81657526005: RNCC: 5 | RNVC: 2

20 May 2004

5340-12-355-4874
Angle Bracket

123554874
4615060140: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-315-3350
Resilient Mount

123153350
615: RNCC: 3 | RNVC: 9

13 Oct 1988

5340-12-360-6420
Mounting Bracket

123606420
000611-271000.00: RNCC: 3 | RNVC: 2

23 Jun 2003

5340-12-186-8877
Webbing Strap

121868877
8794736000: RNCC: 3 | RNVC: 2
8794736000: RNCC: 3 | RNVC: 2
8794736000: RNCC: 5 | RNVC: 9
8794736000: RNCC: 5 | RNVC: 9

16 Feb 1981

5340-12-043-2704

5340-12-184-2317
Pipe Bracket

121842317
211201249A: RNCC: 3 | RNVC: 2

8 Jul 1980

5340-12-357-3592
Strap Hinge

123573592
343.33.910: RNCC: 3 | RNVC: 2

12 Jun 2002

5340-12-156-2804

5340-12-701-6026
Mounting Bracket

127016026
VG95211-ML-127016026: RNCC: 2 | RNVC: 2
5.12.6601.1101.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6787
Dust And Moisture Seal Protective Cap

127016787
VG95211-ML-127016787: RNCC: 2 | RNVC: 2
5.12.7212.8020.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-352-4586
Door Button

123524586
5600023-190284.000.0: RNCC: 2 | RNVC: 2
1272214: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-308-3264
Nonmetallic Bumper

123083264
P-875529-403: RNCC: 3 | RNVC: 2
P875529-403: RNCC: 5 | RNVC: 2

26 Sep 1986

5340-12-164-3644
Retaining Strap

121643644
2360-220085.01.0: RNCC: 2 | RNVC: 2
251133090100: RNCC: 3 | RNVC: 2
2360-220085-01-0: RNCC: 5 | RNVC: 2
2360-220085.01.0: RNCC: 5 | RNVC: 2
251133090100: RNCC: 5 | RNVC: 2
2360-220085.01.0: RNCC: 5 | RNVC: 2
2360-220085-01-0: RNCC: 5 | RNVC: 9
2360-220085.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-9540
Double Angle Bracket

121969540
A-295091-401: RNCC: 3 | RNVC: 2
A295091-401: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-147-2032
Snap Hook

121472032
DIN5299-E140NI: RNCC: 2 | RNVC: 2
DIN5299-E140-NI: RNCC: 3 | RNVC: 2
226-140X12 VERNICKELT: RNCC: 3 | RNVC: 9
E140DIN5299VERNI: RNCC: 5 | RNVC: 2
E140DIN5299VERNICKELT: RNCC: 5 | RNVC: 2
226-140X12VERNICKELT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-4860
Angle Bracket

121994860
C22136-A1000-C338: RNCC: 3 | RNVC: 2
C22136A1000C338: RNCC: 5 | RNVC: 2

1 May 1984

5340-12-701-7662
Retaining Bail

127017662
VG95211-ML-127017662: RNCC: 2 | RNVC: 2
5.12.7702.0500.31: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7921
Mounting Bracket

127017921
VG95211-ML-127017921: RNCC: 2 | RNVC: 2
5.12.7904.0600.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-6779
Mounting Plate

123596779
2500261-180000.065.0: RNCC: 2 | RNVC: 2
2500261-180000.065.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-194-2046
Mending Plate

121942046
66.3851.143.01-A001: RNCC: 3 | RNVC: 2
161399: RNCC: 5 | RNVC: 2
66-3851-143-01A001: RNCC: 5 | RNVC: 9

12 Oct 1982

5340-12-329-0113
Retaining Strap

123290113
81974010838: RNCC: 3 | RNVC: 2
81.97401-0838: RNCC: 5 | RNVC: 2

8 Jul 1992

5340-12-178-5270
Nonmetallic Bumper

121785270
9GP401535-00: RNCC: 3 | RNVC: 2

27 Apr 1979

5340-12-703-3472
Mending Plate

127033472
VG95211-ML-127033472: RNCC: 2 | RNVC: 2
S32-6175-260B/01: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-324-5121
Webbing Strap

123245121
510020-0300.00: RNCC: 2 | RNVC: 2
510020-0300.00: RNCC: 3 | RNVC: 2
510020-0300.00: RNCC: 5 | RNVC: 2
510020-0300.00: RNCC: 5 | RNVC: 9
000-D5-30X1,5X300-BW-RAL6031: RNCC: 6 | RNVC: 9

25 Feb 1991

5340-12-309-7848
Expansion Plug

123097848
DIN443-32-CUZN37F38: RNCC: 2 | RNVC: 2
DIN443-32-MS63: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-308-8653
Mending Plate

123088653
1A846.92-53-00-00-002: RNCC: 3 | RNVC: 2

24 Nov 1986

5340-12-318-1997
Angle Bracket

123181997
C249-A28-C26: RNCC: 3 | RNVC: 2

20 Jun 1989

5340-12-181-1094
Retaining Strap

121811094
90.403.00.222: RNCC: 3 | RNVC: 2
81.92901-0032: RNCC: 5 | RNVC: 2
81929010032: RNCC: 5 | RNVC: 2
3095425: RNCC: 5 | RNVC: 2
0008330181: RNCC: 5 | RNVC: 2
42300424: RNCC: 5 | RNVC: 2
42300424EZ5508-31: RNCC: 5 | RNVC: 2
90-403-00-22-2: RNCC: 5 | RNVC: 2

24 Oct 1979

5340-12-344-4475
Mounting Bracket

123444475
P-296827-009: RNCC: 3 | RNVC: 2
P296827-009: RNCC: 5 | RNVC: 2

28 Oct 1997

5340-12-196-9028
Angle Bracket

121969028
A-295138-403: RNCC: 3 | RNVC: 2
A295138-403: RNCC: 5 | RNVC: 2

30 Aug 1983

5340-12-389-2563
Access Hole Frame

123892563
9999261-185425.000.0: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-12-153-5378
Helical Compression Spring Seat

121535378
100355-111000.03: RNCC: 2 | RNVC: 2
100355-111000.03: RNCC: 3 | RNVC: 2
100355-111000.03: RNCC: 3 | RNVC: 2
100355-111000-03: RNCC: 5 | RNVC: 2
100355-111000-03: RNCC: 5 | RNVC: 9
100355-111000.03: RNCC: 5 | RNVC: 9
100355-111000-03: RNCC: 5 | RNVC: 9
100355-111000.03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-183-6868
Electrical-Mechanical Equipment Post

121836868
VG95148A7XM4X64,5-NRST: RNCC: 2 | RNVC: 2
CF 415 937 B: RNCC: 2 | RNVC: 2
CF 415 937 B: RNCC: 3 | RNVC: 2
VG95148A7XM4X64,5-NRST: RNCC: 3 | RNVC: 2
CF 415 937 B: RNCC: 5 | RNVC: 2
CF415937B: RNCC: 5 | RNVC: 2
CF415937B: RNCC: 5 | RNVC: 2
CF415937B: RNCC: 5 | RNVC: 2
CF415993A: RNCC: 5 | RNVC: 9
CF 415 993 A: RNCC: 5 | RNVC: 9

13 May 1980

5340-12-179-3712
Manual Control Handle

121793712
2300007-189330.00.0: RNCC: 2 | RNVC: 2
2300007-189330.00.0: RNCC: 5 | RNVC: 2
2300007-189330.00.0: RNCC: 5 | RNVC: 2
2300007-189330-00-0: RNCC: 5 | RNVC: 9
2300007-189330.00.0: RNCC: 5 | RNVC: 9

27 Jun 1979

5340-12-701-4573
Loop Clamp

127014573
VG95211-ML-127014573: RNCC: 2 | RNVC: 2
5.12.5314.1100.04: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-193-5232
Hook Handle

121935232
8052/70MM: RNCC: 3 | RNVC: 2
2812/70MM: RNCC: 3 | RNVC: 2
140449: RNCC: 5 | RNVC: 9

29 Jul 1982

5340-12-365-4209
Runner

123654209
2300348-060086.001.0: RNCC: 2 | RNVC: 2
2300348-060086.001.0: RNCC: 3 | RNVC: 2

3 Jan 2005

5340-12-355-5758
Mortise Lock

123555758
0.079.301.9: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-12-308-9670
Rigid Caster

123089670
32PU/125L/4: RNCC: 3 | RNVC: 2
0787485: RNCC: 5 | RNVC: 2
54.0027.718.52: RNCC: 5 | RNVC: 2
0787485: RNCC: 5 | RNVC: 9

2 Dec 1986

5340-12-162-5635
Electrical-Mechanical Equipment Post

121625635
VG95148B5,5XM3X6-ST: RNCC: 2 | RNVC: 2
5.03.061: RNCC: 3 | RNVC: 2
5.03.15: RNCC: 3 | RNVC: 2
VG95148B5,5XM3X6-ST: RNCC: 3 | RNVC: 2
5.03.061 M3X6: RNCC: 5 | RNVC: 2
5-03-15: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-393-2925
Double Angle Bracket

123932925
J92228360-401: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-040-6385

5340-12-189-1841
Angle Bracket

121891841
8331594340: RNCC: 2 | RNVC: 2
8331594340: RNCC: 3 | RNVC: 2

9 Sep 1981

5340-12-386-9415
Mounting Bracket

123869415
X00007293: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-12-322-1170
Lock-Release Lever

123221170
42445/0105: RNCC: 3 | RNVC: 2

25 Jul 1990

5340-12-381-6530
Mounting Bracket

123816530
SK1121-187704.001.0: RNCC: 3 | RNVC: 2

12 Mar 2010

5340-12-363-9990
Lock-Release Lever

123639990
GN300.1-78-M10-25-OR: RNCC: 3 | RNVC: 2

11 Aug 2004

5340-12-701-5099
Loop Clamp

127015099
VG95211-ML-127015099: RNCC: 2 | RNVC: 2
5.12.6100.0776.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-185-0988
Retaining Strap

121850988
DIN1593-15,5ZN: RNCC: 2 | RNVC: 2
DIN1593-15,5-VERZINKT: RNCC: 3 | RNVC: 2
DIN1593-15,5ZN: RNCC: 3 | RNVC: 2
15-5DIN1593STGALZN8C: RNCC: 5 | RNVC: 2
15-5DIN1593VERZINKT: RNCC: 5 | RNVC: 2
DIN1593-15,5-VERZINKT: RNCC: 5 | RNVC: 2
DIN1593-15,5ZN: RNCC: 5 | RNVC: 2

11 Sep 1980

5340-12-177-5316
Loop Clamp

121775316
DIN3016-1-A1-5X12-W5: RNCC: 2 | RNVC: 2
DIN3016-A1-5X12-W5: RNCC: 3 | RNVC: 2
RS1.5/12-W5: RNCC: 3 | RNVC: 2
4110712005: RNCC: 5 | RNVC: 2
RS1100-5-12-1-4571: RNCC: 5 | RNVC: 2
RS1100.5/12-1.4571: RNCC: 5 | RNVC: 2
DIN3016-A1-5X12-W5: RNCC: 5 | RNVC: 9
VG95931A5X12-W5: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-301-2033
Angle Bracket

123012033
A-244846-751: RNCC: 3 | RNVC: 2
A244846-751: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-308-7787
Angle Bracket

123087787
1281-11130.01: RNCC: 2 | RNVC: 2
159061: RNCC: 3 | RNVC: 2
1281-11130.01: RNCC: 5 | RNVC: 2

17 Nov 1986

5340-12-702-8542
Lock-Release Lever

127028542
52-40700630055: RNCC: 2 | RNVC: 2

4 Jan 1996

5340-12-340-9263
Padlock

123409263
85IB/50: RNCC: 3 | RNVC: 9

4 Jul 1996

5340-12-025-3177

5340-12-348-4516
Loop Clamp

123484516
SPGU6159.92/25SZ-B-W1: RNCC: 3 | RNVC: 2
SPGU6000-92/25SZ-B-W1: RNCC: 5 | RNVC: 2

23 Jun 1999

5340-12-196-9549
Mending Plate

121969549
A-295130-403: RNCC: 3 | RNVC: 2
A295130-403: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-312-0044
Hand Crank

123120044
4781.0,25-23-00: RNCC: 3 | RNVC: 2
81.42388.6001: RNCC: 5 | RNVC: 2
81423886001: RNCC: 5 | RNVC: 2

10 Nov 1987

5340-12-148-9287
Webbing Strap

121489287
23176-262365.00.0: RNCC: 2 | RNVC: 2
82300-23176-262365.00.0: RNCC: 3 | RNVC: 2
23176-262365.00.0: RNCC: 3 | RNVC: 2
23176-262365-00-0: RNCC: 5 | RNVC: 2
23305-262182-00-0: RNCC: 5 | RNVC: 2
23176-262365-00-0: RNCC: 5 | RNVC: 9
23176-262365.00.0: RNCC: 5 | RNVC: 9
23305-262182.00.0: RNCC: 5 | RNVC: 9
82300-C300X20-NBR-ST-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-701-6440
Angle Bracket

127016440
VG95211-ML-127016440: RNCC: 2 | RNVC: 2
5.12.7204.0400.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-344-6566
Nonmetallic Bumper

123446566
SO 45/80-I: RNCC: 3 | RNVC: 2
C 93.322.FSO.1K.3: RNCC: 5 | RNVC: 2
81.96020-0326: RNCC: 5 | RNVC: 2
81960200326: RNCC: 5 | RNVC: 2

24 Nov 1997

5340-12-144-2348
Halter

121442348
6030064/65/4730004/5/4700060: RNCC: 3 | RNVC: 2
01236665: RNCC: 5 | RNVC: 2
1236665KZ8935-32: RNCC: 5 | RNVC: 2
N92024L3: RNCC: 5 | RNVC: 2
44151: RNCC: 5 | RNVC: 2
161225501: RNCC: 5 | RNVC: 2
6030063: RNCC: 5 | RNVC: 2
N92024L3: RNCC: 5 | RNVC: 9
01236665: RNCC: 5 | RNVC: 9
1236665KZ8935-32: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-9871
Angle Bracket

121969871
A-230129-223: RNCC: 3 | RNVC: 2
A230129-223: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-338-0007
Mounting Plate

123380007
G32960-W0184-C044: RNCC: 3 | RNVC: 2

10 May 1995

5340-12-307-2817
Line Supporting Strap

123072817
2055-022: RNCC: 3 | RNVC: 9

28 May 1986

5340-12-326-3481
Case Corner

123263481
DIN7469-A56ZN: RNCC: 2 | RNVC: 2
DIN7469-A56-A3P: RNCC: 5 | RNVC: 2

4 Sep 1991

5340-12-374-4344
Loop Clamp

123744344
06678400104: RNCC: 3 | RNVC: 2
MAN194-A8: RNCC: 5 | RNVC: 2
06.67840-0104: RNCC: 5 | RNVC: 2

18 Feb 2008

5340-12-327-3225
Angle Bracket

123273225
C249-A29-C20: RNCC: 2 | RNVC: 2
C249-A29-C20: RNCC: 3 | RNVC: 2

13 Jan 1992

5340-12-358-5864
Double Angle Bracket

123585864
J92228169-003: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-371-4395
Webbing Strap

123714395
71011020: RNCC: 3 | RNVC: 2
25.100: RNCC: 5 | RNVC: 2

29 Mar 2007

5340-12-334-3532
Leather Strap

123343532
CF 344 661 B: RNCC: 2 | RNVC: 2
CF 344 661 B: RNCC: 3 | RNVC: 2
CF 344 661 B: RNCC: 5 | RNVC: 2
CF344661B: RNCC: 5 | RNVC: 2

29 Apr 1994

5340-12-176-9764
Metal Runner

121769764
CF307403A: RNCC: 3 | RNVC: 2
CF 307 403 A: RNCC: 5 | RNVC: 2
CF 307 403 A: RNCC: 5 | RNVC: 2
CF307403A: RNCC: 5 | RNVC: 2
CF307403A: RNCC: 5 | RNVC: 2

3 Jan 1979

5340-12-332-1313
Spring Tension Clip

123321313
1H0853585B: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-359-6099
Mounting Bracket

123596099
2500294-064: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-383-7602
Dust And Moisture Seal Protective Cap Set

123837602
S81015-00: RNCC: 3 | RNVC: 2

6 Dec 2010

5340-12-345-9751
Rigid Caster

123459751
BK-STARU-S140RO: RNCC: 3 | RNVC: 2

26 May 1998

5340-12-315-6114
Resilient Mount

123156114
DIN95363-C30X30-NR40ST: RNCC: 2 | RNVC: 2
31660/C-BSTN4090: RNCC: 5 | RNVC: 2
31660/C-BSTN40: RNCC: 5 | RNVC: 2
520020-M8.NR40.ST: RNCC: 5 | RNVC: 2
81120-30X30-M8.NR40.ST: RNCC: 5 | RNVC: 2
VG95363-C30X30-NR40ST: RNCC: 5 | RNVC: 9

12 Nov 1988

5340-12-377-5226
Runner

123775226
8605059.3.040.02: RNCC: 3 | RNVC: 2

22 Jan 2009

5340-12-194-1149
Electronic Equipment Hardware Kit

121941149
SK870-2: RNCC: 3 | RNVC: 2

4 Oct 1982

5340-12-315-6571
Handle Grip

123156571
23230-172150.016.0: RNCC: 3 | RNVC: 2
02808373: RNCC: 5 | RNVC: 2
MD2808373EE7103-17: RNCC: 5 | RNVC: 2
23230-172150.016.0: RNCC: 5 | RNVC: 9

16 Nov 1988

5340-12-383-8232
Mounting Plate

123838232
2300211-182300.015.0: RNCC: 2 | RNVC: 2
2300211-182300.015.0: RNCC: 3 | RNVC: 2

10 Dec 2010

5340-12-342-5331
Nonmetallic Bumper

123425331
2300421-189510.000: RNCC: 2 | RNVC: 2
9917674: RNCC: 3 | RNVC: 2
2300421-189510.000: RNCC: 3 | RNVC: 2
2300421-189510.000: RNCC: 5 | RNVC: 2
9917674: RNCC: 5 | RNVC: 9
2300421-189510.000: RNCC: 5 | RNVC: 9

25 Feb 1997

5340-12-024-5349

5340-12-198-6451
Rigid Caster

121986451
100372-2113: RNCC: 2 | RNVC: 2
100372-2113: RNCC: 3 | RNVC: 2
100372-2113: RNCC: 5 | RNVC: 9

15 Feb 1984

5340-12-373-8971
Access Cover

123738971
TA3014P014: RNCC: 3 | RNVC: 2

17 Dec 2007

5340-12-090-7713

5340-12-320-5546
Loop Clamp

123205546
856297: RNCC: 3 | RNVC: 9

24 Jan 1990

5340-12-382-6823
Mounting Bracket

123826823
802226471: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-12-349-1896
Metal Grille

123491896
88521 15485: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-359-0705
Rod End Clevis

123590705
380265: RNCC: 3 | RNVC: 2

13 Dec 2002

5340-12-305-5717
Angle Bracket

123055717
99308125R: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-348-0564
Nonmetallic Bumper

123480564
138 865 84: RNCC: 3 | RNVC: 2

6 Apr 1999

5340-12-194-1588
Rod End Clevis

121941588
211721213D: RNCC: 3 | RNVC: 2
81.95490.0060: RNCC: 5 | RNVC: 2
81954900060: RNCC: 5 | RNVC: 2

7 Oct 1982

5340-12-309-7927
Access Door

123097927
4024114: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-095-0126

5340-12-302-0177
Dust And Moisture Seal Protective Cap

123020177
3816882208: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-12-393-7327
Lock-Release Lever

123937327
1103383: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-12-315-6304
Helical Compression Spring Seat

123156304
3000-318200.01: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-12-335-3719
Strap Fastener Loop

123353719
073-450140-901-0: RNCC: 2 | RNVC: 2
073-450140-901-0: RNCC: 3 | RNVC: 2

15 Aug 1994

5340-12-324-3474
Lock-Release Lever

123243474
335948-0892.000: RNCC: 2 | RNVC: 2
335948-0892.000: RNCC: 3 | RNVC: 2
335948-0892.000: RNCC: 5 | RNVC: 9

7 Feb 1991

5340-12-701-6868
Mounting Bracket

127016868
VG95211-ML-127016868: RNCC: 2 | RNVC: 2
5.12.7220.2212.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-308-4765
Loop Clamp

123084765
042-0001-001-020: RNCC: 3 | RNVC: 2
81.95312.0022: RNCC: 5 | RNVC: 2
81953120022: RNCC: 5 | RNVC: 2
0420001001020: RNCC: 5 | RNVC: 2

14 Oct 1986

5340-12-177-5209
Platte

121775209
1216 6224: RNCC: 3 | RNVC: 2
6-324-0-650-002-4: RNCC: 3 | RNVC: 9
12166224: RNCC: 5 | RNVC: 9
6.324.0.650.002.4: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-198-0202
Angle Bracket

121980202
P-230229-291: RNCC: 3 | RNVC: 2
P230229-291: RNCC: 5 | RNVC: 2

12 Dec 1983

5340-12-328-9115
Nonmetallic Bumper

123289115
105-071-998-3: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-310-9918
Mending Plate

123109918
NGE 108-2120: RNCC: 3 | RNVC: 2

16 Jul 1987

5340-12-701-4935
Mounting Plate

127014935
VG95211-ML-127014935: RNCC: 2 | RNVC: 2
5.12.5850.0904.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-328-8778
Lock-Release Lever

123288778
GN6337.3-28-M12-30-N: RNCC: 3 | RNVC: 2

27 Jun 1992

5340-12-386-0150
Retaining Clip

123860150
2500262-193320.001.0: RNCC: 3 | RNVC: 2

29 Jul 2011

5340-12-701-6609
Angle Bracket

127016609
VG95211-ML-127016609: RNCC: 2 | RNVC: 2
5.12.7210.1140.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-346-0051
Double Angle Bracket

123460051
1207 6639: RNCC: 3 | RNVC: 2
12076639EE0112-01: RNCC: 5 | RNVC: 2
3.602.0.637.057.4: RNCC: 5 | RNVC: 9

28 May 1998

5340-12-356-7453
Mounting Bracket

123567453
2125-112620.43B: RNCC: 2 | RNVC: 2
2125-112620.43B: RNCC: 3 | RNVC: 2

2 Apr 2002

5340-12-174-2930
Retaining Strap

121742930
23223-060000.20.0: RNCC: 2 | RNVC: 2
23223-060000-20-0: RNCC: 5 | RNVC: 2
23223-060000.20.0: RNCC: 5 | RNVC: 2
23223-060000-20-0: RNCC: 5 | RNVC: 9
23223-060000.20.0: RNCC: 5 | RNVC: 9

21 Jun 1978

5340-12-310-8349
Lock-Release Lever

123108349
326-51-1401-05: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-12-360-0395
Mounting Plate

123600395
9262924000: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-308-5938
Spring Loaded Cylinder Fastener

123085938
5800.6027: RNCC: 3 | RNVC: 2

28 Oct 1986

5340-12-385-6807
Double Angle Bracket

123856807
5901874740: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-12-303-5786
Angle Bracket

123035786
52.0261.554.00: RNCC: 3 | RNVC: 2

10 Apr 1985

5340-12-166-9769
Bow Handle

121669769
VG95149A120STCR-SCHRAUBE-SCHEIBE: RNCC: 2 | RNVC: 2
370-10-51: RNCC: 3 | RNVC: 2
270.3: RNCC: 3 | RNVC: 2
270-3: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-12-354-1687
T Bracket

123541687
6600211-200900.06: RNCC: 2 | RNVC: 2
6600211-200900.06: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-197-5843
Mending Plate

121975843
A-230129-141: RNCC: 3 | RNVC: 2
A230129-141: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-702-5388
Mounting Bracket

127025388
VG95211-ML-127025388: RNCC: 2 | RNVC: 2
5.51.7204.1550.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-8429
Loop Clamp

127018429
VG95211-ML-127018429: RNCC: 2 | RNVC: 2
5148A-70: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-190-7431
Mending Plate

121907431
NO PRIMARY REF 12-190-7431: RNCC: 3 | RNVC: 2
7103 123288: RNCC: 5 | RNVC: 9
7103123288: RNCC: 5 | RNVC: 9

10 Dec 1981

5340-12-194-9242
Strap Hinge

121949242
VG95552-A80-ST: RNCC: 2 | RNVC: 2
5201: RNCC: 3 | RNVC: 2
VG95552-A80-ST: RNCC: 3 | RNVC: 2
A80VG95552-ST: RNCC: 5 | RNVC: 2
A80VG95552ST: RNCC: 5 | RNVC: 2

20 Dec 1982

5340-12-166-9297
Dust And Moisture Seal Protective Cap

121669297
23290-142050.001: RNCC: 2 | RNVC: 2
23290-142050-001: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-12-320-8073
Casement Fastener

123208073
52E02-03-1AA: RNCC: 3 | RNVC: 2

19 Feb 1990

5340-12-348-0872
Mounting Plate

123480872
V6507-60023-101: RNCC: 2 | RNVC: 2
V6507-60023-101: RNCC: 3 | RNVC: 2

13 Apr 1999

5340-12-333-9914
Mounting Plate

123339914
532820-0228.000: RNCC: 3 | RNVC: 2
532820-0228.000: RNCC: 5 | RNVC: 9

7 Mar 1994

5340-12-352-6314
Permanent Magnet

123526314
8350-0147: RNCC: 2 | RNVC: 2
8350-0147: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-382-2457
Mounting Bracket

123822457
2500171-121400.00: RNCC: 2 | RNVC: 2
2500171-121400.00: RNCC: 3 | RNVC: 2

27 May 2010

5340-12-302-6738
Mending Plate

123026738
20-5220-156: RNCC: 3 | RNVC: 2

22 Jan 1985

5340-12-024-7572

5340-12-371-5650
Snap Hook

123715650
H-020: RNCC: 3 | RNVC: 2

19 Apr 2007

5340-12-331-8056
Extension Drawer Slide

123318056
421.08.556: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-12-359-2911
Mounting Plate

123592911
2819.194100.005.0: RNCC: 3 | RNVC: 2

20 Jan 2003

5340-12-378-3584
Dust And Moisture Seal Protective Cover

123783584
598102-182250.000.0: RNCC: 2 | RNVC: 2
598102-182250.000.0: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-701-7168
Angle Bracket

127017168
VG95211-ML-127017168: RNCC: 2 | RNVC: 2
5.12.7601.8150.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5370
Angle Bracket

127025370
VG95211-ML-127025370: RNCC: 2 | RNVC: 2
5.51.7204.0820.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-320-2201
Webbing Strap

123202201
5802102-201421.00: RNCC: 2 | RNVC: 2
5802102-201421.00: RNCC: 5 | RNVC: 9

19 Dec 1989

5340-12-371-8070
Lock-Release Lever

123718070
GN501-42-B6-SW: RNCC: 3 | RNVC: 2
TS-3783-001-22: RNCC: 5 | RNVC: 2

18 May 2007

5340-12-314-2203
Nonmetallic Bumper

123142203
2300109-990272.000.0: RNCC: 2 | RNVC: 2
2300109-990272.000.0: RNCC: 3 | RNVC: 2

17 Jun 1988

5340-12-309-6376
Loop Clamp

123096376
2745243: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-12-360-3016
Angle Bracket

123603016
1834462400: RNCC: 3 | RNVC: 2
1834462400: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-337-7994
Strap Fastener Loop

123377994
71105: RNCC: 3 | RNVC: 2
71105: RNCC: 5 | RNVC: 9

12 Apr 1995

5340-12-187-5713
Retaining Strap

121875713
5909950468: RNCC: 3 | RNVC: 2

15 Apr 1981

5340-12-317-0693
Mounting Bracket

123170693
4613170040: RNCC: 3 | RNVC: 2

9 Mar 1989

5340-12-386-9502
Mending Plate

123869502
2310142000: RNCC: 3 | RNVC: 2

20 Oct 2011

5340-12-362-8025
Mounting Plate

123628025
10020927: RNCC: 3 | RNVC: 2

2 Apr 2004

5340-12-199-3628
Angle Bracket

121993628
3105040240: RNCC: 3 | RNVC: 2

14 Apr 1984

5340-12-363-7975
Access Cover

123637975
0420 5212: RNCC: 3 | RNVC: 2

24 Jul 2004

5340-12-390-8066
Mounting Plate

123908066
565655007: RNCC: 3 | RNVC: 2

13 Dec 2012

5340-12-392-8852
Mounting Bracket

123928852
L212M4003221: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-12-318-0581
Nonmetallic Bumper

123180581
7261832991: RNCC: 3 | RNVC: 9
4618510097: RNCC: 5 | RNVC: 2

8 Jun 1989

5340-12-320-7637
Resilient Mount

123207637
58500.NR55.ST: RNCC: 3 | RNVC: 2
58500BSTN5590: RNCC: 3 | RNVC: 2
332352316: RNCC: 5 | RNVC: 2
331252316: RNCC: 5 | RNVC: 2

14 Feb 1990

5340-12-042-5242

5340-12-339-0489
Mounting Bracket

123390489
6011591340: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-347-3263
Retaining Strap

123473263
1531316006: RNCC: 3 | RNVC: 9
9354196973: RNCC: 5 | RNVC: 9

26 Nov 1998

5340-12-340-8449
Resilient Mount

123408449
184023101: RNCC: 2 | RNVC: 2
DIN95363-A50X20-M10X28-NBR60ST: RNCC: 2 | RNVC: 2
500040-M10X28.NBR60.ST: RNCC: 5 | RNVC: 2
5218232-NBR60: RNCC: 5 | RNVC: 2
184023102: RNCC: 5 | RNVC: 2
E184023101: RNCC: 5 | RNVC: 2
184023101: RNCC: 5 | RNVC: 2
VG95363-A50X20-M10X28-NBR60ST: RNCC: 5 | RNVC: 9

21 Jun 1996

5340-12-362-6222
Mending Plate

123626222
215653: RNCC: 3 | RNVC: 2
93112-000.03: RNCC: 5 | RNVC: 2

12 Mar 2004

5340-12-151-1979
Manual Control Handle

121511979
DIN99-N125-MS: RNCC: 2 | RNVC: 2
E20XM16DIN99MS: RNCC: 5 | RNVC: 2
N125DIN99MS: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-4722
Verriegelun Buegel

123054722
5800-2002C: RNCC: 3 | RNVC: 2

11 Nov 1985

5340-12-190-2122
Webbing Strap

121902122
502007: RNCC: 3 | RNVC: 2
000-A3-18X2,0X1850-BW-RAL6031: RNCC: 6 | RNVC: 9

12 Nov 1981

5340-12-180-8856
Mounting Plate

121808856
2500035-000000.05: RNCC: 2 | RNVC: 2
2500035-000000.05: RNCC: 3 | RNVC: 2
2500035-000000.05: RNCC: 5 | RNVC: 9
2500035-000000-05: RNCC: 5 | RNVC: 9
2500035-000000-05: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-347-9928
Retaining Clip

123479928
P10-1870: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-12-315-9786
Mending Plate

123159786
P-M24825-002: RNCC: 3 | RNVC: 2
PM24825-002: RNCC: 5 | RNVC: 2

10 Dec 1988

5340-12-191-8600
Butt Hinge

121918600
23031: RNCC: 3 | RNVC: 2
7-9949-23031: RNCC: 5 | RNVC: 2

15 Mar 1982

5340-12-149-0046
Rod End Clevis

121490046
7-29-7-02-10-69-01: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-338-7243
Mounting Bracket

123387243
7068-50000-000-2: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-12-316-7511
Butt Hinge Leaf

123167511
1000192-09 0 00000.01: RNCC: 2 | RNVC: 2
1000192-09 0 00000.01: RNCC: 3 | RNVC: 2
10003-09 0 11000.06: RNCC: 5 | RNVC: 2
1000192-09 0 00000.01: RNCC: 5 | RNVC: 9
10003-09 0 11000.06: RNCC: 5 | RNVC: 9

8 Feb 1989

5340-12-303-5686
Nonmetallic Bumper

123035686
2300007-041430.001.0: RNCC: 2 | RNVC: 2
2300007-041430.001.0: RNCC: 3 | RNVC: 2
2300007-041430.001.0: RNCC: 5 | RNVC: 2
1504272: RNCC: 5 | RNVC: 2
2300007-041430.001.0: RNCC: 5 | RNVC: 9

4 Apr 1985

5340-12-196-4341
Casement Fastener

121964341
P-855943-011: RNCC: 3 | RNVC: 2
P855943-011: RNCC: 5 | RNVC: 2

6 Jul 1983

5340-12-174-1920
Loop Clamp

121741920
DIN3016-1-B1-28X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-B1-28X15-W1-2: RNCC: 3 | RNVC: 2
RS0.28/15: RNCC: 3 | RNVC: 2
RS28-15: RNCC: 5 | RNVC: 2
RS28/15: RNCC: 5 | RNVC: 2
DIN3016-B1-28X15-W1-2: RNCC: 5 | RNVC: 2
4100015028: RNCC: 5 | RNVC: 2
VG95931-B28X15-W1: RNCC: 5 | RNVC: 9
VG95931B28X15W1: RNCC: 5 | RNVC: 9

12 Jun 1978

5340-12-328-9129
Loop Clamp

123289129
DIN3016-1-D1-16X12-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-16X12-W5: RNCC: 3 | RNVC: 2
RSGU1.16/12-W5: RNCC: 3 | RNVC: 2
5M.3821.222.28: RNCC: 5 | RNVC: 2
DIN3016-D1-16X12-W5: RNCC: 5 | RNVC: 9
VG95931-D16X12-W5: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-702-3661
Butt Hinge

127023661
VG95211-ML-127023661: RNCC: 2 | RNVC: 2
5.12.0200.3230.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-348-8990
Strap Hinge

123488990
6.372-017: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-176-8778
Spring Tension Clip

121768778
51-6861-070-05: RNCC: 3 | RNVC: 2

20 Dec 1978

5340-12-331-6283
Retaining Strap

123316283
480/7345-04-11-00/47-49: RNCC: 3 | RNVC: 2
480-7345-04-11-00-47-49: RNCC: 5 | RNVC: 2

2 Jun 1993

5340-12-701-5587
Mounting Plate

127015587
VG95211-ML-127015587: RNCC: 2 | RNVC: 2
5.12.6113.9000.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-188-5081
Split Tubular Clip

121885081
076287: RNCC: 3 | RNVC: 2
E3640-0000-0004: RNCC: 5 | RNVC: 2
3640-0000-0004: RNCC: 5 | RNVC: 2

15 Jul 1981

5340-12-155-3827
Nut And Bolt Locking Plate

121553827
160-63038-08: RNCC: 3 | RNVC: 2
160-63038-08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-184-3353
Mounting Plate

121843353
5801357-1700.20D: RNCC: 2 | RNVC: 2
5801357-1700.20D: RNCC: 3 | RNVC: 2
5801357-1700-20D: RNCC: 5 | RNVC: 9
5801357-1700-20D: RNCC: 5 | RNVC: 9
5801357-1700-20D: RNCC: 5 | RNVC: 9

17 Jul 1980

5340-12-313-8630
Double Angle Bracket

123138630
2602159: RNCC: 3 | RNVC: 2
2602-159: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-363-0538
Angle Bracket

123630538
2300042-992130.005: RNCC: 2 | RNVC: 2
2300042-992130.005: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-190-8758
Helical Compression Spring Seat

121908758
2410320059: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-342-8140
Strap Hinge

123428140
P-295666-033: RNCC: 3 | RNVC: 2
P295666-033: RNCC: 5 | RNVC: 2

7 Apr 1997

5340-12-330-2286
Resilient Mount

123302286
HM6.80/17C.21: RNCC: 3 | RNVC: 9
8450107: RNCC: 5 | RNVC: 2
3-0744-097: RNCC: 5 | RNVC: 2
0744097: RNCC: 5 | RNVC: 2

18 Nov 1992

5340-12-192-8721
Hand Carrying Strap Assembly

121928721
8-4161.00: RNCC: 2 | RNVC: 2
8-4161.00: RNCC: 3 | RNVC: 2
8-4161.00: RNCC: 5 | RNVC: 9
8-4161-00: RNCC: 5 | RNVC: 9
8-4161.00: RNCC: 5 | RNVC: 9

1 Jun 1982

5340-12-301-0241
Double Angle Bracket

123010241
P-855102-001: RNCC: 3 | RNVC: 2
P855102-001: RNCC: 5 | RNVC: 2

19 Sep 1984

5340-12-701-5335
Retaining Strap

127015335
VG95211-ML-127015335: RNCC: 2 | RNVC: 2
5.12.6105.1510.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-327-8104
Mending Plate

123278104
C42080-A34-C18: RNCC: 2 | RNVC: 2
C42080-A34-C18: RNCC: 3 | RNVC: 2

7 Mar 1992

5340-12-165-2716
Electrical-Mechanical Equipment Post

121652716
VG95148A4XM2X11,3-3.3535.20-ALOD: RNCC: 3 | RNVC: 2
566-01-01-04-00-003: RNCC: 3 | RNVC: 2
028779: RNCC: 5 | RNVC: 2
566-01-010400003: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-321-4881
Angle Bracket

123214881
702-183311-902-0: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-390-6280
Mounting Bracket

123906280
313407: RNCC: 3 | RNVC: 2
5387-06-16-00/37: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-12-316-0022
Metal Runner

123160022
C22107-A202-C72: RNCC: 3 | RNVC: 2

14 Dec 1988

5340-12-308-3799
Electrical-Mechanical Equipment Post

123083799
2300223-140000.05.0: RNCC: 2 | RNVC: 2
2300223-140000.05.0: RNCC: 3 | RNVC: 2

3 Oct 1986

5340-12-359-8648
Access Cover

123598648
2500261-183763.000.0: RNCC: 2 | RNVC: 2
2500261-183763.000.0: RNCC: 3 | RNVC: 2

17 Mar 2003

5340-12-359-4352
Loop Clamp

123594352
DIN3016-1-D1-5X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-701-6791
Dust And Moisture Seal Protective Cap

127016791
VG95211-ML-127016791: RNCC: 2 | RNVC: 2
5.12.7212.8020.97: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-189-5270
Detent Plunger

121895270
009-078.120-008: RNCC: 3 | RNVC: 2
009-078-120-008: RNCC: 5 | RNVC: 2
009-078-120-008: RNCC: 5 | RNVC: 9
009-078.120-008: RNCC: 5 | RNVC: 9

5 Oct 1981

5340-12-162-5016
Angle Bracket

121625016
100356-108000.01: RNCC: 2 | RNVC: 2
100356-108000.01: RNCC: 3 | RNVC: 2
100356-108000-01: RNCC: 5 | RNVC: 2
100356-108000.01: RNCC: 5 | RNVC: 2
100356-108000-01: RNCC: 5 | RNVC: 9
100356-108000.01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-352-8039
Manual Control Lever

123528039
KM 1.50.011371: RNCC: 3 | RNVC: 2
150011371: RNCC: 5 | RNVC: 2
0312/033: RNCC: 5 | RNVC: 2

18 Dec 2000

5340-12-363-5117
Manual Control Handle

123635117
24974: RNCC: 3 | RNVC: 2
0009196160: RNCC: 5 | RNVC: 2

23 Jun 2004

5340-12-326-3634
Double Angle Bracket

123263634
3964920741: RNCC: 3 | RNVC: 2
396 492 07 41: RNCC: 5 | RNVC: 2

5 Sep 1991

5340-12-136-3345
Retaining Strap

121363345
514M13012E1: RNCC: 3 | RNVC: 2
8399950910: RNCC: 5 | RNVC: 2
514M13012: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-350-8225
Mounting Plate

123508225
8332033640: RNCC: 3 | RNVC: 2
833 203 36 40: RNCC: 5 | RNVC: 2

25 May 2000

5340-12-316-8269
Door Button

123168269
2300279-9703.03: RNCC: 2 | RNVC: 2
2300279-9703.03: RNCC: 3 | RNVC: 2
2300279-9703.03: RNCC: 5 | RNVC: 9
9871579: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-366-5049
Mounting Plate

123665049
2 0045-273: RNCC: 3 | RNVC: 2
2 0045-273: RNCC: 5 | RNVC: 2

2 May 2005

5340-12-314-6926
Rod End Clevis

123146926
61L14-2-1AA: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-12-162-5664
Nonmetallic Bumper

121625664
NO PRIMARY REF 12-162-5664: RNCC: 3 | RNVC: 2
8062-597: RNCC: 5 | RNVC: 2
8062597: RNCC: 5 | RNVC: 2
8430698: RNCC: 5 | RNVC: 2
6081: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-5308
Mending Plate

121995308
8370702269: RNCC: 3 | RNVC: 2

9 May 1984

5340-12-364-4796
Dust And Moisture Seal Protective Cap

123644796
000140403: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-350-7559
Angle Bracket

123507559
105-735217: RNCC: 3 | RNVC: 2

16 May 2000

5340-12-366-2960
Mounting Bracket

123662960
104191: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-365-9667
Loop Clamp

123659667
3656X015: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-12-361-4922
Mounting Plate

123614922
1504302: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-346-1619
Retaining Strap

123461619
NO27210: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-12-313-8673
Double Angle Bracket

123138673
4255243540: RNCC: 3 | RNVC: 2
425 524 35 40: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-364-4815
Webbing Strap

123644815
7989111: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-371-5820
Retaining Clip

123715820
T881M4033205: RNCC: 2 | RNVC: 2
T881M4033205: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-12-179-5106
Mounting Bracket

121795106
4355400673: RNCC: 3 | RNVC: 2

4 Jul 1979

5340-12-192-3028
Angle Bracket

121923028
4603170136: RNCC: 3 | RNVC: 2

13 Apr 1982

5340-12-391-4803
Mounting Plate

123914803
I001135TAN686A: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-040-1528

5340-12-324-1325
Mending Plate

123241325
2601471: RNCC: 3 | RNVC: 2

23 Jan 1991

5340-12-315-3544
Sealing Plug Assembly

123153544
1463203349: RNCC: 3 | RNVC: 2

14 Oct 1988

5340-12-329-7689
Nonmetallic Bumper

123297689
100.364: RNCC: 2 | RNVC: 2
100.364: RNCC: 3 | RNVC: 2

25 Sep 1992

5340-12-094-9472

5340-12-093-6689

5340-12-092-2981

5340-12-171-7957
Loop Clamp

121717957
4638 305 029: RNCC: 3 | RNVC: 2
4638 305 029: RNCC: 5 | RNVC: 2
4638305029: RNCC: 5 | RNVC: 9

14 Nov 1977

5340-12-094-1812

5340-12-177-5498
Hasp Staple

121775498
0009880383: RNCC: 3 | RNVC: 2

5 Feb 1979

5340-12-309-7926
Access Cover

123097926
4024115: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-320-1667
Butt Hinge Leaf

123201667
503374: RNCC: 3 | RNVC: 2
503374: RNCC: 5 | RNVC: 2

14 Dec 1989

5340-12-331-5088
Access Cover

123315088
681565511: RNCC: 3 | RNVC: 2
681.5655.11: RNCC: 5 | RNVC: 2

12 May 1993

5340-12-173-5189

5340-12-380-6240
Rigid Caster

123806240
BH-POEV160K: RNCC: 3 | RNVC: 2
BH-POEV160K: RNCC: 5 | RNVC: 2

13 Nov 2009

5340-12-322-2332
Mounting Bracket

123222332
272.332 909: RNCC: 2 | RNVC: 2
272.332.909: RNCC: 3 | RNVC: 2
272.332 909: RNCC: 5 | RNVC: 9

3 Aug 1990

5340-12-164-0100
Spring Tension Clip

121640100
2212721020: RNCC: 3 | RNVC: 2
795: RNCC: 3 | RNVC: 2
91650928: RNCC: 5 | RNVC: 2
22127 21020: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-350-2961
Shimmy Damper

123502961
SVC-003-02: RNCC: 3 | RNVC: 2

14 Mar 2000

5340-12-366-7923
Mounting Plate

123667923
2300427-151820.002: RNCC: 2 | RNVC: 2
2300427-151820.002: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-12-385-6635
Mounting Plate

123856635
F1.4211-50-30-00.00-15: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-12-361-4693
Arched Cushion

123614693
009-222.300-069: RNCC: 2 | RNVC: 2
009-222.300-069: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-700-5038
Retaining Strap

127005038
VG95211-ML-127005038: RNCC: 2 | RNVC: 2
5149A-12: RNCC: 3 | RNVC: 2
0500840058859: RNCC: 5 | RNVC: 2

19 Sep 1992

5340-12-329-7976
Electrical-Mechanical Equipment Post

123297976
VG95148C5XM3X8-ST: RNCC: 2 | RNVC: 2
VG95148C5XM3X8-ST: RNCC: 3 | RNVC: 2
DA5-M3X8: RNCC: 3 | RNVC: 2
272.306 111: RNCC: 5 | RNVC: 2

30 Sep 1992

5340-12-365-6593
Angle Bracket

123656593
J52430817-403: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-12-364-7681
Spacing Threaded Standoff

123647681
00418-156-000: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-352-6315
Metal Grille

123526315
8320-0018: RNCC: 2 | RNVC: 2
8320-0018: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-700-2764
Rod End Clevis

127002764
51-270539094: RNCC: 2 | RNVC: 2
700-49-23: RNCC: 3 | RNVC: 2

26 Nov 1991

5340-12-340-1558
Nonmetallic Bumper

123401558
81437060031: RNCC: 3 | RNVC: 2
81.43706-0031: RNCC: 5 | RNVC: 2
1748137005: RNCC: 5 | RNVC: 2

7 Mar 1996

5340-12-300-2182
Retaining Strap

123002182
23114-1900.38: RNCC: 2 | RNVC: 2
23114-1900.38: RNCC: 3 | RNVC: 2
23114-1900-38: RNCC: 5 | RNVC: 9
23114-1900.38: RNCC: 5 | RNVC: 9
23114-1900-38: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-360-8455
Runner

123608455
1014-016-30/L=1200/T=150/X UND-: RNCC: 3 | RNVC: 1
1014-016-30/1200: RNCC: 5 | RNVC: 2

16 Jul 2003

5340-12-342-7405
Mounting Plate

123427405
211 153 2202/7: RNCC: 3 | RNVC: 2
L1Z BD IT-17.6: RNCC: 5 | RNVC: 2

24 Mar 1997

5340-12-177-5162
Flush Bolt

121775162
2300002-181043.002: RNCC: 2 | RNVC: 2
2300002-181043.002: RNCC: 3 | RNVC: 2
2300002-181043-002: RNCC: 5 | RNVC: 9
2300002-181043.002: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-145-0936
Retaining Strap

121450936
1201 8798: RNCC: 3 | RNVC: 2
A26.17-163.4: RNCC: 5 | RNVC: 2
12018798: RNCC: 5 | RNVC: 2
A26-17-163-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-2695
Butt Hinge Leaf

123262695
2300348-187000.001.0: RNCC: 2 | RNVC: 2
2300348-187000.001.0: RNCC: 3 | RNVC: 2

23 Aug 1991

5340-12-153-2062
Padlock

121532062
DIN7465-D2-40-BK-MS-MS: RNCC: 2 | RNVC: 2
NM162: RNCC: 3 | RNVC: 2
1206 1047: RNCC: 5 | RNVC: 2
3-416-0-018-001-4: RNCC: 5 | RNVC: 2
820589089902: RNCC: 5 | RNVC: 2
NM162: RNCC: 5 | RNVC: 9
3-416-0-018-001-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-4687
Resilient Mount

121904687
60165002-B: RNCC: 3 | RNVC: 2
E1N 101-05: RNCC: 3 | RNVC: 2
E1N101-05: RNCC: 5 | RNVC: 2
Y29E1N-101-05: RNCC: 5 | RNVC: 2
480-4922-21-00-00-19: RNCC: 5 | RNVC: 9
480/4922-21-00-00/19: RNCC: 5 | RNVC: 9
Y29E1N-101-05: RNCC: 5 | RNVC: 9
VG95365-C5-CR-ST: RNCC: 5 | RNVC: 9

30 Nov 1981

5340-12-157-9365
Resilient Mount

121579365
DIN95363-A15X8-M4X6-M4X9-NR55ST: RNCC: 2 | RNVC: 2
500012-M4X6-M4X9.NR55.ST: RNCC: 5 | RNVC: 2
1870344: RNCC: 5 | RNVC: 2
NA403-2-2-5: RNCC: 5 | RNVC: 2
VG95363-A15X8-M4X6-M4X9-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-406-4339
Mounting Bracket

5340-12-327-0942
Electrical-Mechanical Equipment Post

123270942
VG95148B5,5XM3X17-ST: RNCC: 2 | RNVC: 2
5.03.171: RNCC: 3 | RNVC: 2
M3-SW5,5X17C66.05.000: RNCC: 5 | RNVC: 2
MS-SW5.5X17C66.05.000: RNCC: 5 | RNVC: 9

29 Nov 1991

5340-12-177-5128
Flush Bolt

121775128
2300002-181170.001: RNCC: 2 | RNVC: 2
2300002-181170.001: RNCC: 3 | RNVC: 2
2300002-181170-001: RNCC: 5 | RNVC: 9
2300002-181170.001: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-351-7006
Headless Straight Rod

123517006
6210.112.000.010: RNCC: 3 | RNVC: 2

16 Aug 2000

5340-12-346-6931
Webbing Strap

123466931
27800: RNCC: 3 | RNVC: 2
EU273.200.001: RNCC: 5 | RNVC: 2
27800-5: RNCC: 5 | RNVC: 2
27800-5: RNCC: 5 | RNVC: 2

27 Aug 1998

5340-12-320-9889
Mounting Bracket

123209889
2300269-183022.000.0: RNCC: 2 | RNVC: 2
790-12.32.000-25: RNCC: 3 | RNVC: 2

14 Mar 1990

5340-12-702-5323
Angle Bracket

127025323
VG95211-ML-127025323: RNCC: 2 | RNVC: 2
5.51.7060.0050.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-166-1881
Rim Lock

121661881
6000206: RNCC: 3 | RNVC: 2
2795.228: RNCC: 5 | RNVC: 2
06000206: RNCC: 5 | RNVC: 2
7-223-0310: RNCC: 5 | RNVC: 2
9000 3133: RNCC: 5 | RNVC: 2
9000 8273: RNCC: 5 | RNVC: 2

12 Aug 1976

5340-12-701-8211
Mending Plate

127018211
VG95211-ML-127018211: RNCC: 2 | RNVC: 2
5.12.9205.0651.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-134-7564
Retaining Strap

121347564
635B05004: RNCC: 3 | RNVC: 2
635B05004/1: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-187-4750
Nut And Bolt Locking Plate

121874750
036-242000-16-3: RNCC: 3 | RNVC: 2
036-242000-16-3: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-306-2203
Spannversch Halter

123062203
1865-010540.05.0: RNCC: 3 | RNVC: 9

7 Feb 1986

5340-12-315-6649
Mending Plate

123156649
510252-3555.000: RNCC: 3 | RNVC: 2
510252-3555: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-374-5523
Mending Plate

123745523
453 6517-001: RNCC: 3 | RNVC: 2
453 6517-001: RNCC: 5 | RNVC: 2

26 Feb 2008

5340-12-195-3082
Handle Grip

121953082
DIN98-D16-ST: RNCC: 2 | RNVC: 2
D16DIN98-ST: RNCC: 5 | RNVC: 2

7 Feb 1983

5340-12-180-8925
Dust And Moisture Seal Protective Cap-Plug

121808925
5800828-13423-006: RNCC: 3 | RNVC: 2
5800828-13423.006: RNCC: 5 | RNVC: 2
5800828-13423.006: RNCC: 5 | RNVC: 9
5800828-13423-006: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-322-2420
Latch Bar

123222420
02A-2448-14-43: RNCC: 3 | RNVC: 2

3 Aug 1990

5340-12-186-8403
Halter

121868403
64452075: RNCC: 3 | RNVC: 2
5801352-7300-06: RNCC: 5 | RNVC: 9
4452/075: RNCC: 5 | RNVC: 9
5801352-7300-06: RNCC: 5 | RNVC: 9

11 Feb 1981

5340-12-311-8430
Access Cover

123118430
2300074-3001.01: RNCC: 2 | RNVC: 2
2300074-3001.01: RNCC: 3 | RNVC: 2
2300074-3001.01: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-367-1151
Manual Control Handle

123671151
4723390: RNCC: 3 | RNVC: 2
G3 40091 7786: RNCC: 5 | RNVC: 2
4723390: RNCC: 5 | RNVC: 2

11 Jul 2005

5340-12-308-4603
Shimmy Damper

123084603
81437016570: RNCC: 3 | RNVC: 2
2502520: RNCC: 5 | RNVC: 2
81.43701.6570: RNCC: 5 | RNVC: 2
0120144020295: RNCC: 5 | RNVC: 9
2502520140295: RNCC: 5 | RNVC: 9

10 Oct 1986

5340-12-388-3675
Dust And Moisture Seal Protective Cap

123883675
866417401: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-12-362-7627
Spacing Threaded Standoff

123627627
10976: RNCC: 3 | RNVC: 2
10976: RNCC: 5 | RNVC: 2

27 Mar 2004

5340-12-308-6593
Helical Compression Spring Seat

123086593
333004-8013.000: RNCC: 2 | RNVC: 2
333004-8013.000: RNCC: 3 | RNVC: 2
1255-13000: RNCC: 5 | RNVC: 2
1255-13000: RNCC: 5 | RNVC: 2
333004-8013.000: RNCC: 5 | RNVC: 9
1255-13000: RNCC: 5 | RNVC: 9

4 Nov 1986

5340-12-317-7103
Mounting Bracket

123177103
2300109-059124.001.0: RNCC: 2 | RNVC: 2
2300109-059124.001.0: RNCC: 3 | RNVC: 2

3 May 1989

5340-12-317-7157
Door Button

123177157
4900059-211829.000.0: RNCC: 3 | RNVC: 2

3 May 1989

5340-12-011-5298

5340-12-702-2336
Mounting Plate

127022336
VG95211-ML-127022336: RNCC: 2 | RNVC: 2
30.7701.90: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-176-3303
Access Cover

121763303
30-79510-0022: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-338-9069
Double Angle Bracket

123389069
4900319-107000.01: RNCC: 2 | RNVC: 2
4900319-107000.01: RNCC: 3 | RNVC: 2

6 Sep 1995

5340-12-198-0445
Mending Plate

121980445
C42080-A6-C107: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-701-9925
Loop Clamp

127019925
VG95211-ML-127019925: RNCC: 2 | RNVC: 2
155N464-417: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-173-2187
Loop Clamp

121732187
6L3821-022-152641: RNCC: 3 | RNVC: 2

29 Mar 1978

5340-12-347-3610
Mechanical Stop

123473610
2125-129710A00C: RNCC: 2 | RNVC: 2
2125-129710A00C: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-12-161-6729
Dust And Moisture Seal Protective Cap

121616729
1213-140-13: RNCC: 3 | RNVC: 2
1213-140-13: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-391-0440
Angle Bracket

123910440
601283-201200.01: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-12-362-9767
Angle Bracket

123629767
TC-1660-02.200.300: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-12-319-4121
Mounting Bracket

123194121
2653-013110.00: RNCC: 2 | RNVC: 2
2653-013110.00: RNCC: 3 | RNVC: 2
740010360: RNCC: 5 | RNVC: 2

29 Sep 1989

5340-12-355-9546
Butt Hinge

123559546
2500274-1000.08: RNCC: 2 | RNVC: 2
2500274-1000.08: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-365-3917
Mounting Bracket

123653917
2500135-730203.003.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-197-7655
Double Angle Bracket

121977655
A-145401-016: RNCC: 3 | RNVC: 2
A145401-016: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-356-9488
Dirt And Liquid Deflector

123569488
N/S5-6/310/4: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-12-365-5902
Angle Bracket

123655902
J32420016-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-194-4101
Metal Runner

121944101
66.3851.105.02-A002: RNCC: 3 | RNVC: 2
161361: RNCC: 5 | RNVC: 2
66-3851-105-02A002: RNCC: 5 | RNVC: 9

3 Nov 1982

5340-12-300-6729
Angle Bracket

123006729
4354262240: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-154-2709

5340-12-367-0411
Flush Bolt

123670411
0000LLTRV3033: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-12-378-1128
Hasp Staple

123781128
0000843704-POS1: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-12-197-3452
Resilient Mount

121973452
251411039: RNCC: 3 | RNVC: 9

13 Oct 1983

5340-12-196-7326
Handle Grip

121967326
840417R1: RNCC: 3 | RNVC: 9

9 Aug 1983

Load More Results