What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 14 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 14 of 178

5340-12-177-4714
Loop Clamp

121774714
DIN3016-2-G1-32X9-W1-2: RNCC: 2 | RNVC: 2
SP32/9ZY: RNCC: 3 | RNVC: 2
DIN3016-G1-32X9-W1-2: RNCC: 3 | RNVC: 2
1210000032: RNCC: 5 | RNVC: 2
SP32-9ZY: RNCC: 5 | RNVC: 2
VG95931G32X9W1: RNCC: 5 | RNVC: 9
DIN3016-G1-32X9-W1-2: RNCC: 5 | RNVC: 9
VG95931-G32X9-W1: RNCC: 5 | RNVC: 9

1 Feb 1979

5340-12-325-0601
Loop Clamp

123250601
SI82/40SKZ-M6-2TLG.-W1-2: RNCC: 3 | RNVC: 2
7701018307: RNCC: 5 | RNVC: 2
1215 1653: RNCC: 5 | RNVC: 2
6-0401-51-6-0821: RNCC: 5 | RNVC: 2

26 Apr 1991

5340-12-374-8368
Dust And Moisture Seal Protective Cap

123748368
SK796-191400.001.0: RNCC: 3 | RNVC: 2
7078978: RNCC: 5 | RNVC: 2
1826577: RNCC: 5 | RNVC: 9

31 Mar 2008

5340-12-321-8956
Metal Runner

123218956
7068-15300-018-2: RNCC: 3 | RNVC: 2

6 Jul 1990

5340-12-701-6506
Angle Bracket

127016506
VG95211-ML-127016506: RNCC: 2 | RNVC: 2
5.12.7206.1650.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-145-8207
Butt Hinge Leaf

121458207
1199: RNCC: 3 | RNVC: 9
1199: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-354-9020
Leakproof Seal Plug

123549020
0299 2202: RNCC: 3 | RNVC: 2

4 Sep 2001

5340-12-154-6089
Retaining Strap

121546089
8209950215: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-179-3003
Nonmetallic Bumper

121793003
3816880063: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-367-5453
Mounting Bracket

123675453
H10586: RNCC: 3 | RNVC: 2

31 Aug 2005

5340-12-183-5416
Electrical-Mechanical Equipment Post

121835416
VG95148B6XM4X55-NRST: RNCC: 2 | RNVC: 2
CF 431 019: RNCC: 2 | RNVC: 2
CF 431 019: RNCC: 3 | RNVC: 2
VG95148B6XM4X55-NRST: RNCC: 3 | RNVC: 2
CF431019: RNCC: 5 | RNVC: 2
CF431019: RNCC: 5 | RNVC: 2
CF 431 019: RNCC: 5 | RNVC: 2
CF431019: RNCC: 5 | RNVC: 2

26 Apr 1980

5340-12-326-6888
Access Cover

123266888
279.615 700: RNCC: 3 | RNVC: 2
279.615700: RNCC: 5 | RNVC: 2
1300839-010593: RNCC: 5 | RNVC: 9

22 Oct 1991

5340-12-375-8860
Rod End Clevis

123758860
F1.1697-00-03-10.00-18: RNCC: 3 | RNVC: 2
H45203: RNCC: 5 | RNVC: 2

16 Jul 2008

5340-12-377-4465
Loop Clamp

123774465
17316192: RNCC: 3 | RNVC: 2

16 Jan 2009

5340-12-353-3967
Mechanical Stop

123533967
17948740: RNCC: 3 | RNVC: 2

20 Mar 2001

5340-12-199-1137
Mending Plate

121991137
65.7019.220.21-A001: RNCC: 3 | RNVC: 2
183664: RNCC: 5 | RNVC: 2

28 Mar 1984

5340-12-040-1360

5340-12-043-4219

5340-12-136-8249

5340-12-184-5188
Spring Tension Clip

121845188
5800820-149-004: RNCC: 3 | RNVC: 2
5800820-149.004: RNCC: 5 | RNVC: 2

29 Jul 1980

5340-12-344-4793
Mounting Plate

123444793
2500255-332100.09.0: RNCC: 2 | RNVC: 2
2500255-332100.09.0: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-12-347-5074
Door Closer

123475074
TS83-3-5: RNCC: 3 | RNVC: 2

21 Dec 1998

5340-12-316-2933
Angle Bracket

123162933
5184685: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-315-6851
Access Cover

123156851
4139 306 041: RNCC: 3 | RNVC: 2
4139306041: RNCC: 5 | RNVC: 9

19 Nov 1988

5340-12-320-7891
Mounting Bracket

123207891
G-104876: RNCC: 3 | RNVC: 2
G104876: RNCC: 5 | RNVC: 2

16 Feb 1990

5340-12-356-5190
Mounting Bracket

123565190
P-075599-401: RNCC: 3 | RNVC: 2
P07599-401: RNCC: 5 | RNVC: 2

7 Mar 2002

5340-12-175-8047
Catch Strike

121758047
51L7-5BF: RNCC: 3 | RNVC: 2
51L7-5BF4-2: RNCC: 5 | RNVC: 2
1077657: RNCC: 5 | RNVC: 2

18 Oct 1978

5340-12-319-4320
Casement Fastener

123194320
2300232-140132.001.0: RNCC: 2 | RNVC: 2
2300232-140132.001.0: RNCC: 3 | RNVC: 2
2300232-140132.001.02: RNCC: 5 | RNVC: 9

2 Oct 1989

5340-12-354-6674
Multiple Angle Bracket

123546674
P-876166-023: RNCC: 3 | RNVC: 2
P876166-023: RNCC: 5 | RNVC: 2

14 Aug 2001

5340-12-309-3837
Rim Lock Set

123093837
A10-24.972.00.0: RNCC: 3 | RNVC: 2
A10-24-972-00-0: RNCC: 5 | RNVC: 2
A10-24-972-00-0: RNCC: 5 | RNVC: 9

21 Jan 1987

5340-12-182-1543
Mounting Bracket

121821543
580156-4700.003: RNCC: 2 | RNVC: 2
3602028703: RNCC: 3 | RNVC: 2
5801506-4700-003: RNCC: 5 | RNVC: 2
5801506-4700-003: RNCC: 5 | RNVC: 9
36020 28703: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-350-4452
Clamping Catch

123504452
12747302: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-175-7962
Buckle

121757962
81968070001: RNCC: 3 | RNVC: 2
52S507: RNCC: 5 | RNVC: 2

18 Oct 1978

5340-12-384-9884
Lock Key Set

123849884
I005739: RNCC: 3 | RNVC: 2

15 Apr 2011

5340-12-390-0528
Swivel Caster

123900528
40742: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-370-2941
Rod End Clevis

123702941
0000296728: RNCC: 3 | RNVC: 2

23 Oct 2006

5340-12-332-9702
Ball Socket Seat

123329702
52.3109.500.02: RNCC: 2 | RNVC: 2
52.3109.500.02: RNCC: 3 | RNVC: 2

14 Oct 1993

5340-12-371-1654
Nonmetallic Bumper

123711654
4618840092: RNCC: 3 | RNVC: 2

22 Feb 2007

5340-12-359-9626
Turnbuckle

123599626
CBD32565P04: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-379-4686
Clamping Catch

123794686
504.250D: RNCC: 3 | RNVC: 2

27 Jul 2009

5340-12-370-4824
Mounting Bracket

123704824
54.1094.672.00: RNCC: 3 | RNVC: 2

13 Nov 2006

5340-12-378-3974
Dust And Moisture Seal Protective Plug

123783974
98425447: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-12-185-5521
Snap Hook

121855521
DIN5299-C120BK: RNCC: 2 | RNVC: 2
DIN5299-C120-ROH: RNCC: 3 | RNVC: 2
245-120X11 BLANK: RNCC: 3 | RNVC: 9
C120DIN5299BLANK: RNCC: 5 | RNVC: 2
DIN5299C120: RNCC: 5 | RNVC: 2
DIN5299C120BK: RNCC: 5 | RNVC: 2
0524 120 11: RNCC: 5 | RNVC: 2
245 120X11 BLANK: RNCC: 5 | RNVC: 9

14 Oct 1980

5340-12-341-2884
Resilient Mount

123412884
0118288-11MN60: RNCC: 3 | RNVC: 2
007776-0000: RNCC: 5 | RNVC: 2
81.42365-0043: RNCC: 5 | RNVC: 2
0118 288: RNCC: 5 | RNVC: 2
81423650043: RNCC: 5 | RNVC: 2

20 Aug 1996

5340-12-186-2062
Resilient Mount

121862062
66000901: RNCC: 3 | RNVC: 2
742272S1MITTEL: RNCC: 3 | RNVC: 2
82300-742272S1.NR60.ST: RNCC: 5 | RNVC: 2
742272S1BL2: RNCC: 5 | RNVC: 2
66000901.NR60.ST: RNCC: 5 | RNVC: 2

6 Dec 1980

5340-12-177-2351
Retaining Band

121772351
2300002-122443.000: RNCC: 2 | RNVC: 2
2300002-122443.000: RNCC: 3 | RNVC: 2
2300002-122443: RNCC: 5 | RNVC: 9

22 Jan 1979

5340-12-339-5382
Mounting Bracket

123395382
5-5610-054669: RNCC: 3 | RNVC: 2
1-3500-7019/31 IT2.13: RNCC: 5 | RNVC: 2

4 Dec 1995

5340-12-340-2303
Mounting Bracket

123402303
463-223550.001: RNCC: 3 | RNVC: 9
9896267: RNCC: 5 | RNVC: 9

16 Mar 1996

5340-12-312-5445
Support Hook

123125445
2300088-104102.01: RNCC: 2 | RNVC: 2
2300088-104102.01: RNCC: 3 | RNVC: 2
2300088-104102.01: RNCC: 5 | RNVC: 9
9844679: RNCC: 5 | RNVC: 9
2300088-104102.01: RNCC: 5 | RNVC: 9

15 Jan 1988

5340-12-386-7276
Clamping Catch

123867276
6002-U15-JQ: RNCC: 3 | RNVC: 2

27 Sep 2011

5340-12-393-7169
Mounting Bracket

123937169
11.44143-0028: RNCC: 3 | RNVC: 2
11.44143-0028: RNCC: 5 | RNVC: 2

7 Oct 2013

5340-12-369-2136
Retaining Clip

123692136
D0105534-001: RNCC: 3 | RNVC: 2

6 Jun 2006

5340-12-701-8447
Loop Clamp

127018447
VG95211-ML-127018447: RNCC: 2 | RNVC: 2
5149A-42: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-366-6637
Loop Clamp

123666637
DIN3567-A89: RNCC: 2 | RNVC: 2

20 May 2005

5340-12-309-8518
Access Cover

123098518
320-997004: RNCC: 3 | RNVC: 2

11 Mar 1987

5340-12-390-8560
Dust And Moisture Seal Protective Plug

123908560
SW4031T205: RNCC: 3 | RNVC: 2

20 Dec 2012

5340-12-328-3713
Retaining Strap

123283713
AFG0596608: RNCC: 3 | RNVC: 2

12 May 1992

5340-12-375-5832
Mounting Plate

123755832
L246M2028204: RNCC: 3 | RNVC: 2

16 Jun 2008

5340-12-387-8664
Loop Clamp

123878664
7092775: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-380-6779
Loop Clamp

123806779
2024900841: RNCC: 3 | RNVC: 2

18 Nov 2009

5340-12-371-2113
Mechanic Equipment Hardware Kit

123712113
920649-97213500000: RNCC: 3 | RNVC: 2

28 Feb 2007

5340-12-337-4637
Expansion Shield

123374637
246-3009-0010: RNCC: 3 | RNVC: 2
0009904892: RNCC: 5 | RNVC: 2

8 Mar 1995

5340-12-171-4450
Dust And Moisture Seal Protective Plug

121714450
1480522007: RNCC: 3 | RNVC: 2
570591877: RNCC: 5 | RNVC: 2
81.96410-0296: RNCC: 5 | RNVC: 2
81964100296: RNCC: 5 | RNVC: 2
1480522007: RNCC: 5 | RNVC: 2
1480522007: RNCC: 5 | RNVC: 9

13 Oct 1977

5340-12-300-2607
Mending Plate

123002607
5801411-4125.006: RNCC: 3 | RNVC: 2
5801411-4125-006: RNCC: 5 | RNVC: 2

19 Jul 1984

5340-12-300-2179
Retaining Strap

123002179
23114-1900.49: RNCC: 2 | RNVC: 2
23114-1900.49: RNCC: 3 | RNVC: 2
23114-1900-49: RNCC: 5 | RNVC: 9
23114-1900-49: RNCC: 5 | RNVC: 9
23114-1900.49: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-700-6251
Dust And Moisture Seal Boot

127006251
VG95211-ML-127006251: RNCC: 2 | RNVC: 2
5.12.0300.0060.00: RNCC: 3 | RNVC: 2
0501400056539: RNCC: 5 | RNVC: 2

30 Sep 1992

5340-12-318-0973
Mounting Bracket

123180973
140-112010-001-0: RNCC: 3 | RNVC: 2
57845-760: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-197-3605
Extension Drawer Slide Section

121973605
86-1559-201100.001.0: RNCC: 3 | RNVC: 2
86-1559-201100.001.0: RNCC: 5 | RNVC: 9

17 Oct 1983

5340-12-358-3537
Double Angle Bracket

123583537
85083400006: RNCC: 3 | RNVC: 2
85.08340.0006: RNCC: 5 | RNVC: 2

14 Oct 2002

5340-12-323-4080
Dust And Moisture Seal Protective Cap

123234080
6010170125: RNCC: 3 | RNVC: 2

23 Nov 1990

5340-12-302-2598
Angle Bracket

123022598
6204295240: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-391-4659
Access Cover

123914659
I006183TAN686A: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-701-1779
Angle Bracket

127011779
VG95211-ML-127011779: RNCC: 2 | RNVC: 2
5.12.0246.0371.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-5812
Retaining Strap

127015812
VG95211-ML-127015812: RNCC: 2 | RNVC: 2
5.12.6409.1500.32: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-5353
Angle Bracket

127015353
VG95211-ML-127015353: RNCC: 2 | RNVC: 2
5.12.6105.2050.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-382-6024
Elastic Strap

123826024
J KURZ-RG1-1000: RNCC: 3 | RNVC: 2

15 Jul 2010

5340-12-701-7246
Angle Bracket

127017246
VG95211-ML-127017246: RNCC: 2 | RNVC: 2
5.12.7602.0280.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-026-5567

5340-12-004-2214

5340-12-004-3771

5340-12-172-1180
Butt Hinge Leaf

121721180
2360-261350.01.0: RNCC: 2 | RNVC: 2
2360-261350.01.0: RNCC: 3 | RNVC: 2
2360-261350-01-0: RNCC: 5 | RNVC: 2
2360-261350-01-0: RNCC: 5 | RNVC: 9
2360-261350.01.0: RNCC: 5 | RNVC: 9

22 Dec 1977

5340-12-308-5515
Angle Bracket

123085515
6.226.0.650.034.5: RNCC: 3 | RNVC: 2
6-226-0-650-034-5: RNCC: 5 | RNVC: 9
6.226.0.650.034.5: RNCC: 5 | RNVC: 9

22 Oct 1986

5340-12-338-2309
Spacing Threaded Standoff

123382309
VG95148B5,5XM3X13,5-ST: RNCC: 2 | RNVC: 2
5.03.134: RNCC: 3 | RNVC: 2
VG95148-B5,5XM3X13,5-ST: RNCC: 3 | RNVC: 2
5.03.131: RNCC: 3 | RNVC: 2

8 Jun 1995

5340-12-381-0285
Mounting Bracket

123810285
9999075-161124.005.0: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-12-198-7217
Support Hook

121987217
5801998-410000.01: RNCC: 2 | RNVC: 2
5801998-410000.01: RNCC: 3 | RNVC: 2

22 Feb 1984

5340-12-310-3084
Angle Bracket

123103084
5802017-000100.05: RNCC: 2 | RNVC: 2
5802017-000100.05: RNCC: 3 | RNVC: 2

8 May 1987

5340-12-343-1893
Loop Clamp

123431893
588.50-100017-001: RNCC: 3 | RNVC: 2

15 May 1997

5340-12-315-9091
Electrical-Mechanical Equipment Post

123159091
5800330-441.01: RNCC: 2 | RNVC: 2
7840466-0200.01: RNCC: 3 | RNVC: 2
17925510: RNCC: 5 | RNVC: 2
5800330-441.01: RNCC: 5 | RNVC: 2
5800330-441.01: RNCC: 5 | RNVC: 9

7 Dec 1988

5340-12-184-1969
Nonmetallic Bumper

121841969
10613-01: RNCC: 3 | RNVC: 2
465720: RNCC: 5 | RNVC: 2

3 Jul 1980

5340-12-300-5829
Kunst Gleitschiene

123005829
C42107-A425-C54: RNCC: 3 | RNVC: 2

17 Aug 1984

5340-12-159-3068
Retaining Strap

121593068
100330-3600-07: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-391-2398
Bow Handle

123912398
5204.111.442.001: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-12-322-0422
Manual Control Lever

123220422
4003.124.68/81: RNCC: 3 | RNVC: 2
1161368: RNCC: 5 | RNVC: 2
1161368: RNCC: 5 | RNVC: 2

19 Jul 1990

5340-12-365-3972
Handwheel

123653972
A202612: RNCC: 3 | RNVC: 2

28 Dec 2004

5340-12-366-6069
Dust And Moisture Seal Protective Plug

123666069
4618992208: RNCC: 3 | RNVC: 2

12 May 2005

5340-12-347-1738
Angle Bracket

123471738
5803571-310500.01: RNCC: 2 | RNVC: 2
5803571-310500.01: RNCC: 5 | RNVC: 2
5803571-310500.01: RNCC: 5 | RNVC: 2

6 Nov 1998

5340-12-700-8524
Loop Clamp

127008524
VG95211-ML-127008524: RNCC: 2 | RNVC: 2
155N1119-387: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-339-8299
Mounting Bracket

123398299
2654-330280.01: RNCC: 2 | RNVC: 2
2654-330280.01: RNCC: 3 | RNVC: 2
2654-330 280.01: RNCC: 5 | RNVC: 9
2654-330 280.01: RNCC: 5 | RNVC: 9
K6084-1000.01: RNCC: 5 | RNVC: 9

23 Jan 1996

5340-12-167-5483
Spring Tension Clip

121675483
3554255: RNCC: 3 | RNVC: 2
2852-8235-00: RNCC: 5 | RNVC: 2
3554255: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-701-9961
Loop Clamp

127019961
VG95211-ML-127019961: RNCC: 2 | RNVC: 2
155N464-674: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-323-8150
Mounting Bracket

123238150
100-00082-12.01: RNCC: 2 | RNVC: 2
100-00082-12.01: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-12-175-6404
Webbing Strap

121756404
23111-4120.00: RNCC: 2 | RNVC: 2
983215-257: RNCC: 3 | RNVC: 2
23111-4120.00: RNCC: 3 | RNVC: 9
23111-4120.00: RNCC: 5 | RNVC: 2
23111-4120.00: RNCC: 5 | RNVC: 9
23111-4120-00: RNCC: 5 | RNVC: 9
23111-4120-00: RNCC: 5 | RNVC: 9
000-A3-25X2,5X100-BW-RAL6031: RNCC: 6 | RNVC: 9

10 Oct 1978

5340-12-358-6190
Mounting Bracket

123586190
2500262-390200.001.0: RNCC: 2 | RNVC: 2
2500262-390200.001.0: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-12-355-4353
Manual Control Lever

123554353
7253.001.4: RNCC: 3 | RNVC: 2

15 Nov 2001

5340-12-325-7650
Mounting Bracket

123257650
2056460: RNCC: 3 | RNVC: 2
0020564600: RNCC: 5 | RNVC: 2
3.448215: RNCC: 5 | RNVC: 2

5 Jul 1991

5340-12-349-4513
Helical Compression Spring Retainer

123494513
535.60.65.1: RNCC: 3 | RNVC: 9
535.60.651: RNCC: 5 | RNVC: 9

17 Nov 1999

5340-12-336-6314
Retaining Strap

123366314
E20895: RNCC: 3 | RNVC: 2
E 20 895: RNCC: 5 | RNVC: 2

2 Dec 1994

5340-12-187-3338
Butt Hinge

121873338
4-109802: RNCC: 3 | RNVC: 2

30 Mar 1981

5340-12-385-9784
Manual Control Lever

123859784
2500262-330131.000.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-319-6543
Mending Plate

123196543
6100.041.9: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-12-136-2369
Nonmetallic Bumper

121362369
837-81.96020.0042-PUR60: RNCC: 3 | RNVC: 2
81960200042: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-172-8149
Rod End Clevis

121728149
PAN4552-1L: RNCC: 3 | RNVC: 2

22 Feb 1978

5340-12-143-2042
Spring Tension Clip

121432042
8791250001: RNCC: 3 | RNVC: 9
BF2D10X: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-311-9775
Mounting Bracket

123119775
51191070027: RNCC: 3 | RNVC: 2
51191070027: RNCC: 5 | RNVC: 2
51.19107.0027: RNCC: 5 | RNVC: 2

5 Nov 1987

5340-12-321-3832
Mounting Bracket

123213832
NO PRIMARY REF 12-321-3832: RNCC: 3 | RNVC: 2
5029-006.03.10: RNCC: 5 | RNVC: 9

11 May 1990

5340-12-701-4513
Retaining Band

127014513
VG95211-ML-127014513: RNCC: 2 | RNVC: 2
5.12.5314.0730.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-354-8575
Elastic Strap

123548575
8310-0026: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-040-1273

5340-12-313-6318
Retaining Strap

123136318
NO PRIMARY REF 12-313-6318: RNCC: 3 | RNVC: 2
5512 168765: RNCC: 5 | RNVC: 9

21 Apr 1988

5340-12-311-5075
Turnbuckle Body

123115075
23303-140000.42: RNCC: 2 | RNVC: 2
619-22.00.154-02: RNCC: 3 | RNVC: 2

11 Sep 1987

5340-12-338-8857
Mounting Plate

123388857
6700017-206711.00: RNCC: 2 | RNVC: 2
6700017-206711.00: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-12-363-1102
Mounting Bracket

123631102
160-27205-01: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-163-3525
Retaining Strap

121633525
MV86052TS484V: RNCC: 3 | RNVC: 2
0029971190: RNCC: 5 | RNVC: 2
0029971190: RNCC: 5 | RNVC: 2
0029971190: RNCC: 5 | RNVC: 2
MV86052TS484V: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-149-0921
Mending Plate

121490921
121G10015: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-027-8921

5340-12-317-4534
Door Hook

123174534
229G-175MM MS: RNCC: 3 | RNVC: 2

10 Apr 1989

5340-12-366-1692
Multiple Angle Bracket

123661692
2300002-204093.001: RNCC: 2 | RNVC: 2
2300002-204093.001: RNCC: 3 | RNVC: 2

16 Mar 2005

5340-12-176-7750
Angle Bracket

121767750
51-6861-560-04: RNCC: 3 | RNVC: 2

18 Dec 1978

5340-12-309-8868
Angle Bracket

123098868
6600118-651000.01: RNCC: 2 | RNVC: 2
6600118-651000.01: RNCC: 3 | RNVC: 2

16 Mar 1987

5340-12-304-0888
Swivel Caster

123040888
LZ-PP 100 R: RNCC: 3 | RNVC: 2
LZ-PY 100 R: RNCC: 5 | RNVC: 9

10 Jun 1985

5340-12-192-8489
Butt Hinge

121928489
8-4017.02: RNCC: 2 | RNVC: 2
8-4017.02: RNCC: 3 | RNVC: 2
8-4017-02: RNCC: 5 | RNVC: 9
8-4017.02: RNCC: 5 | RNVC: 9
8-4017.02: RNCC: 5 | RNVC: 9

27 May 1982

5340-12-380-2822
Mechanic Equipment Hardware Kit

123802822
3-0670.9973.00 B: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-12-317-7552
Handle Grip

123177552
4/0019/7006/6: RNCC: 3 | RNVC: 2

9 May 1989

5340-12-389-0568
Door Closer

123890568
TS83EN3-6: RNCC: 3 | RNVC: 2

23 May 2012

5340-12-341-0042
Angle Bracket

123410042
1421332026: RNCC: 3 | RNVC: 2
1 421 332 026: RNCC: 5 | RNVC: 2
1 421 332 026: RNCC: 5 | RNVC: 2

16 Jul 1996

5340-12-198-0970
Angle Bracket

121980970
1200096-122140001: RNCC: 2 | RNVC: 2

20 Dec 1983

5340-12-393-1338
Block Clamp

123931338
ECS6088G1C05B: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-12-182-1287
Door Handle

121821287
81626410066: RNCC: 3 | RNVC: 2

14 Jan 1980

5340-12-190-2559
Expansion Shield

121902559
C20165-A175-C304: RNCC: 3 | RNVC: 2
C20165A175C304: RNCC: 5 | RNVC: 2
TGH175T304: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-196-4516
Bridge Clamp

121964516
C22117-A163-C3: RNCC: 3 | RNVC: 2
C22117A163C3: RNCC: 5 | RNVC: 2

7 Jul 1983

5340-12-195-7622
Butt Hinge

121957622
2500067-102412.00: RNCC: 2 | RNVC: 2
2500067-102412.00: RNCC: 3 | RNVC: 2
2500067-102412-00: RNCC: 5 | RNVC: 2

13 Apr 1983

5340-12-301-4705
Plug Button

123014705
2500109-190000.28.0: RNCC: 2 | RNVC: 2
2500109-190000.28.0: RNCC: 3 | RNVC: 2
2500109-190000-28-0: RNCC: 5 | RNVC: 2
2500109-190000-28-0: RNCC: 5 | RNVC: 9
2500109-190000.28.0: RNCC: 5 | RNVC: 9

18 Oct 1984

5340-12-152-1946
Butt Hinge

121521946
100278-15030.00.0: RNCC: 2 | RNVC: 2
100278-15030-00-0: RNCC: 3 | RNVC: 2
100278-15030.00.0: RNCC: 3 | RNVC: 2
100278-15030-00-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-010-8469

5340-12-180-5881
Butt Hinge Leaf

121805881
81613605004: RNCC: 3 | RNVC: 2

19 Sep 1979

5340-12-362-7344
Multiple Angle Bracket

123627344
S533M1021211: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-12-199-5454
Nonmetallic Bumper

121995454
2500057-500000.12: RNCC: 2 | RNVC: 2
2500057-500000.12: RNCC: 3 | RNVC: 2
2500057-500000.12: RNCC: 3 | RNVC: 2
2500057-500000.12: RNCC: 3 | RNVC: 2
PLATTE 545X100X3-CR75: RNCC: 5 | RNVC: 2
2500057-500000-12: RNCC: 5 | RNVC: 9

10 May 1984

5340-12-173-4563
Retaining Strap

121734563
LN29836-B2-20: RNCC: 2 | RNVC: 2
LN29836-2-20: RNCC: 5 | RNVC: 2

18 Apr 1978

5340-12-329-2673
Mending Plate

123292673
11.30043-0001: RNCC: 3 | RNVC: 2
11.30043-0001: RNCC: 5 | RNVC: 2
11.30043-0001: RNCC: 5 | RNVC: 2
11-30043-0001: RNCC: 5 | RNVC: 9

29 Jul 1992

5340-12-186-9876
Mending Plate

121869876
CH18439: RNCC: 3 | RNVC: 2
CH18439: RNCC: 5 | RNVC: 9
42182-11200-11: RNCC: 5 | RNVC: 9

25 Feb 1981

5340-12-185-6547
Resilient Mount

121856547
DIN95363-D30X40-M8X20-NR70ST: RNCC: 2 | RNVC: 2
505000-30X40-M8X20.NR70.ST: RNCC: 5 | RNVC: 2
BI8-20MBS70-00: RNCC: 5 | RNVC: 9
BI8-20-27N: RNCC: 5 | RNVC: 9
VG95363-D30X40-M8X20-NR70ST: RNCC: 5 | RNVC: 9

23 Oct 1980

5340-12-330-9333
Mounting Plate

123309333
480-7346-02-11-04: RNCC: 3 | RNVC: 2
480/7346-02-11-04: RNCC: 5 | RNVC: 2

1 Mar 1993

5340-12-367-2508
Dust And Moisture Seal Protective Cap

123672508
J2913002H521S01-001: RNCC: 3 | RNVC: 2

26 Jul 2005

5340-12-700-9249
Loop Clamp

127009249
VG95211-ML-127009249: RNCC: 2 | RNVC: 2
200N7-80: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-6107
Angle Bracket

123216107
537152-1507.000: RNCC: 3 | RNVC: 2
537152-1507.000: RNCC: 5 | RNVC: 9

7 Jun 1990

5340-12-365-5874
Double Angle Bracket

123655874
J32320040-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-303-0492
Access Cover

123030492
43210-001: RNCC: 3 | RNVC: 2
43 210-001: RNCC: 5 | RNVC: 9

22 Feb 1985

5340-12-360-0082
Mounting Bracket

123600082
9415429240: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-024-9848

5340-12-024-9646

5340-12-385-7974
Angle Bracket

123857974
2500262-531830.002.0: RNCC: 3 | RNVC: 2

8 Jul 2011

5340-12-315-1306
Butt Hinge

123151306
9.80.1.006: RNCC: 3 | RNVC: 2
461.030.000: RNCC: 5 | RNVC: 2
371.34724: RNCC: 5 | RNVC: 2

20 Sep 1988

5340-12-301-7810
Angle Bracket

123017810
4-68884: RNCC: 3 | RNVC: 2
268835: RNCC: 5 | RNVC: 2

9 Nov 1984

5340-12-394-3355
Mechanical Stop

123943355
1010286-3: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-12-328-2900
Mounting Bracket

123282900
2300232-971004.000.0: RNCC: 2 | RNVC: 2
2300232-971004.000.0: RNCC: 3 | RNVC: 2

5 May 1992

5340-12-185-4556
Angle Bracket

121854556
CF 328 707 -X: RNCC: 3 | RNVC: 2
CF3287070X: RNCC: 5 | RNVC: 2
CF3287070X: RNCC: 5 | RNVC: 2
CF 328 707 -X: RNCC: 5 | RNVC: 2

7 Oct 1980

5340-12-393-7690
Runner

123937690
G41780: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-180-7196
Platte

121807196
3819390121: RNCC: 3 | RNVC: 2

28 Sep 1979

5340-12-196-3037
Angle Bracket

121963037
03650900: RNCC: 3 | RNVC: 2

27 Jun 1983

5340-12-359-4324
Access Cover

123594324
868201001: RNCC: 2 | RNVC: 2
868201001: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-12-181-0483
Spring Tension Clip

121810483
00-1774: RNCC: 3 | RNVC: 2
0039885778: RNCC: 5 | RNVC: 2

19 Oct 1979

5340-12-330-3985
Dust And Moisture Seal Protective Plug

123303985
260Q40404: RNCC: 3 | RNVC: 2
7440/4: RNCC: 5 | RNVC: 2
GPN260Q40404: RNCC: 5 | RNVC: 2
5003074101: RNCC: 5 | RNVC: 2
Q40404: RNCC: 5 | RNVC: 9
GPN260,Q40404: RNCC: 5 | RNVC: 9

10 Dec 1992

5340-12-342-6949
Lock-Release Lever

123426949
3-601-0-640-002-4: RNCC: 2 | RNVC: 2
1202 8035: RNCC: 3 | RNVC: 2
3.601.0.640.002.4: RNCC: 3 | RNVC: 9
12028035EE0111-27: RNCC: 5 | RNVC: 2

18 Mar 1997

5340-12-357-1765
Mechanical Stop

123571765
245/7383-02-00-37: RNCC: 3 | RNVC: 2

15 May 2002

5340-12-187-4614
Retaining Strap

121874614
2300109-060000.018.0: RNCC: 2 | RNVC: 2
2300109-060000.018.0: RNCC: 3 | RNVC: 2
2300109-060000.018.0: RNCC: 3 | RNVC: 2
2300109-060000.018.0: RNCC: 5 | RNVC: 9
2300109-060000-018-0: RNCC: 5 | RNVC: 9
2300109-060000-018-0: RNCC: 5 | RNVC: 9
2300109-060000-018-0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-160-0876
Clamping Catch

121600876
DIN3134-D70BK-U: RNCC: 2 | RNVC: 2
DIN3134-D70-BK-U: RNCC: 5 | RNVC: 2
8791389006: RNCC: 5 | RNVC: 9
B70DIN3134R0H: RNCC: 5 | RNVC: 9
BK70DIN3134-ROH: RNCC: 5 | RNVC: 9
DIN3134-BK70-ROH: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-163-6763
Retaining Strap

121636763
23290-091000.002: RNCC: 2 | RNVC: 2
23290-091000.002: RNCC: 3 | RNVC: 2
23290-091000.002: RNCC: 3 | RNVC: 2
23290-091000.002: RNCC: 5 | RNVC: 9
23290-091000-002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-340-7358
Permanent Magnet

123407358
8848 458-002: RNCC: 3 | RNVC: 2

1 Jun 1996

5340-12-355-1045
Butt Hinge

123551045
1054-U6: RNCC: 3 | RNVC: 2
160.14.0004: RNCC: 5 | RNVC: 2

9 Oct 2001

5340-12-135-7268

5340-12-179-6387
Nonmetallic Bumper

121796387
1113230044: RNCC: 3 | RNVC: 2

13 Jul 1979

5340-12-179-6656
Leather Strap

121796656
2500075-324000.03.0: RNCC: 2 | RNVC: 2
2500075-324000.03.0: RNCC: 3 | RNVC: 2
2500075-324000-03-0: RNCC: 5 | RNVC: 9
2500075-324000-03-0: RNCC: 5 | RNVC: 9
2500075-324000.03.0: RNCC: 5 | RNVC: 9

16 Jul 1979

5340-12-196-9546
Mending Plate

121969546
A-295092-403: RNCC: 3 | RNVC: 2
A295092-403: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-166-5136
Angle Bracket

121665136
2360-069630.01.0: RNCC: 2 | RNVC: 2
2360-069630.01.0: RNCC: 3 | RNVC: 2
2360-069630.01.0: RNCC: 3 | RNVC: 2
2360-069630.01.0: RNCC: 5 | RNVC: 2
2360-069630-01-0: RNCC: 5 | RNVC: 9
2360-069630.01.0: RNCC: 5 | RNVC: 9
2360-069630.01.0: RNCC: 5 | RNVC: 9

16 Sep 1976

5340-12-320-4616
Mending Plate

123204616
408-00-08-631-20E: RNCC: 2 | RNVC: 2
408-00.08.631-20E: RNCC: 3 | RNVC: 2
408-00-08-631-20E: RNCC: 5 | RNVC: 9

17 Jan 1990

5340-12-366-6061
Nonmetallic Bumper

123666061
GF40/63 QUALITAET1/2150: RNCC: 3 | RNVC: 2
4633170112: RNCC: 5 | RNVC: 2

12 May 2005

5340-12-301-9723
Nonmetallic Bumper

123019723
46 726-001: RNCC: 3 | RNVC: 2
46726-001: RNCC: 5 | RNVC: 2

23 Nov 1984

5340-12-317-2541
Plain Solid Disk

123172541
H984-9,5X1-ST: RNCC: 3 | RNVC: 2
0116 7012: RNCC: 5 | RNVC: 2
116-7012: RNCC: 5 | RNVC: 9

21 Mar 1989

5340-12-703-2062
Mounting Bracket

127032062
VG95211-ML-127032062: RNCC: 2 | RNVC: 2
5.12.5313.2970.03: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-340-4286
Mounting Plate

123404286
V048K2S: RNCC: 3 | RNVC: 2
PL E 7/1 P-31: RNCC: 5 | RNVC: 2
V048K2S (IDVCS065-117.895): RNCC: 5 | RNVC: 2

12 Apr 1996

5340-12-390-6665
Section Block Clamp

123906665
316937: RNCC: 3 | RNVC: 2
2170-07-15-05/39: RNCC: 5 | RNVC: 2

3 Dec 2012

5340-12-188-3871
Webbing Strap

121883871
1400045-3300: RNCC: 2 | RNVC: 2
1400045-3300: RNCC: 3 | RNVC: 2
MI6097-3300: RNCC: 3 | RNVC: 2
1400045-3300: RNCC: 5 | RNVC: 9
1400045-3300: RNCC: 5 | RNVC: 9
000-D6-25X2,0X500-BW-RAL6031: RNCC: 6 | RNVC: 9

6 Jul 1981

5340-12-347-1717
Angle Bracket

123471717
105-072-287-9: RNCC: 3 | RNVC: 2

6 Nov 1998

5340-12-183-3696
Bridge Clamp

121833696
4780315-10000-001: RNCC: 3 | RNVC: 2
5801802-10000-001: RNCC: 5 | RNVC: 2
5801802-10000-001: RNCC: 5 | RNVC: 9
5801802-10000.001: RNCC: 5 | RNVC: 9

9 Apr 1980

5340-12-185-1873
Mounting Plate

121851873
100000117: RNCC: 2 | RNVC: 2
100000117: RNCC: 3 | RNVC: 2
5801357-1700-44F: RNCC: 5 | RNVC: 9
5801357-1700.44F: RNCC: 5 | RNVC: 9
5801357-1700.44F: RNCC: 5 | RNVC: 9
5801357-1700-44F: RNCC: 5 | RNVC: 9
5801357-1700.44F: RNCC: 5 | RNVC: 9
5801357-1700-44F: RNCC: 5 | RNVC: 9

18 Sep 1980

5340-12-301-7498
Resilient Mount

123017498
1000163-372030.003.0: RNCC: 3 | RNVC: 2
1000163-372030.003.0: RNCC: 5 | RNVC: 2
1000163-372030.003.0: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-12-184-6759
Butt Hinge Leaf

121846759
CF429215A: RNCC: 3 | RNVC: 2
CF429215A: RNCC: 5 | RNVC: 2
CF 429 215 A: RNCC: 5 | RNVC: 2
CF 429 215 A: RNCC: 5 | RNVC: 2

12 Aug 1980

5340-12-339-8545
Mounting Plate

123398545
1.8535-7: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-12-385-5342
Mechanical Stop

123855342
10186-180020.007.0: RNCC: 2 | RNVC: 2
10186-180020.007.0: RNCC: 3 | RNVC: 2

14 Jun 2011

5340-12-371-4181
Loop Clamp

123714181
161.100.600: RNCC: 3 | RNVC: 2
161 100 600: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-12-371-7021
Helical Compression Spring Seat

123717021
43982: RNCC: 3 | RNVC: 2

7 May 2007

5340-12-316-1366
Mounting Bracket

123161366
133437: RNCC: 3 | RNVC: 2
1003.02.04.00.00: RNCC: 5 | RNVC: 2
832 002 9Y4: RNCC: 5 | RNVC: 2

24 Dec 1988

5340-12-393-0716
Hinge Torsion Bar

123930716
M57T50481: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-12-127-8034

5340-12-142-7637
Strap Hinge

121427637
SEPA52X45MM: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-178-0538
Manual Control Handle

121780538
3227600061: RNCC: 3 | RNVC: 2
A3227600061: RNCC: 5 | RNVC: 2

16 Mar 1979

5340-12-122-4516
Klemme

121224516
3045460044: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-385-1342
Metallic Solid Wheel

123851342
I001106TAN686A: RNCC: 3 | RNVC: 2

4 May 2011

5340-12-333-4121
Manual Control Lever

123334121
136-768432-0: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-365-1499
Mounting Bracket

123651499
2500278-199700.000.0: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-327-3226
Angle Bracket

123273226
C117-A44-C29: RNCC: 2 | RNVC: 2
C117-A44-C29: RNCC: 3 | RNVC: 2

13 Jan 1992

5340-12-185-4791
Helical Compression Spring Seat

121854791
V22-464-010126-10EZ: RNCC: 3 | RNVC: 2
5800359-010126.10: RNCC: 5 | RNVC: 9
5800359-010126-10: RNCC: 5 | RNVC: 9
5800359-010126-10E: RNCC: 5 | RNVC: 9

9 Oct 1980

5340-12-195-5180
Retaining Strap

121955180
VG96928T08Z2: RNCC: 2 | RNVC: 2
26.02.52: RNCC: 3 | RNVC: 2
26-02-52: RNCC: 5 | RNVC: 2

8 Mar 1983

5340-12-317-0285
Strap Hinge Leaf

123170285
5802196-20143: RNCC: 2 | RNVC: 2
4810388-20143: RNCC: 3 | RNVC: 2
5802196-20143: RNCC: 5 | RNVC: 2

6 Mar 1989

5340-12-381-2956
Mounting Plate

123812956
424-04-IBU3: RNCC: 3 | RNVC: 2
4250473100509: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-131-2768
Access Cover

121312768
28.8228.0112: RNCC: 3 | RNVC: 9
28-8228-0112: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-2494
Pipe Bracket

123062494
71-097: RNCC: 3 | RNVC: 2
0008351214: RNCC: 5 | RNVC: 2

11 Feb 1986

5340-12-186-8015
Nonmetallic Bumper

121868015
007-6520: RNCC: 3 | RNVC: 2
20H192: RNCC: 5 | RNVC: 2
632: RNCC: 5 | RNVC: 9
20H192: RNCC: 5 | RNVC: 9

6 Feb 1981

5340-12-317-6149
Double Angle Bracket

123176149
P-296819-065: RNCC: 3 | RNVC: 2
P296819-065: RNCC: 5 | RNVC: 2

21 Apr 1989

5340-12-333-4000
Sealing Plug Assembly

123334000
4409970035: RNCC: 3 | RNVC: 2
440-997-0035: RNCC: 5 | RNVC: 9
4409970035: RNCC: 5 | RNVC: 9

10 Dec 1993

5340-12-363-9869
Angle Bracket

123639869
T531M3004118: RNCC: 3 | RNVC: 2

10 Aug 2004

5340-12-338-8324
Angle Bracket

123388324
463-069102.005: RNCC: 3 | RNVC: 9
9901337: RNCC: 5 | RNVC: 9

30 Aug 1995

5340-12-326-4505
Electrical-Mechanical Equipment Post

123264505
1300839-0100001.001: RNCC: 2 | RNVC: 2
279.614793: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-12-355-5799
Access Cover

123555799
2125-025250.18B: RNCC: 2 | RNVC: 2
2125-025250.18B: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-12-320-8551
Mounting Bracket

123208551
2654-330271.00: RNCC: 2 | RNVC: 2
2654-330271.00: RNCC: 3 | RNVC: 2
2654-330 271.00: RNCC: 5 | RNVC: 9
679-00160100: RNCC: 5 | RNVC: 9
679-00160100: RNCC: 5 | RNVC: 9

28 Feb 1990

5340-12-702-2164
Angle Bracket

127022164
VG95211-ML-127022164: RNCC: 2 | RNVC: 2
30.7222.570: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-340-1560
Nonmetallic Bumper

123401560
81437060014: RNCC: 3 | RNVC: 2
1748203100: RNCC: 5 | RNVC: 2
81.43706-0014: RNCC: 5 | RNVC: 2

7 Mar 1996

5340-12-179-5646
Mounting Bracket

121795646
81123400009: RNCC: 3 | RNVC: 2
81.12340.0009: RNCC: 5 | RNVC: 9

6 Jul 1979

5340-12-328-6272
Access Cover

123286272
1350.10.17.448: RNCC: 3 | RNVC: 2

10 Jun 1992

5340-12-348-5976
Mounting Plate

123485976
NN31351G01: RNCC: 3 | RNVC: 2

23 Jul 1999

5340-12-312-9263
Electrical-Mechanical Equipment Post

123129263
AS400-28-4: RNCC: 3 | RNVC: 2

19 Feb 1988

5340-12-304-9926
Mending Plate

123049926
95-75609-3: RNCC: 3 | RNVC: 2

13 Sep 1985

5340-12-327-7826
Snap Hook

123277826
226S-120X11-VERZINKT: RNCC: 3 | RNVC: 9
226S-120X11: RNCC: 5 | RNVC: 9

4 Mar 1992

5340-12-303-2375
Electrical-Mechanical Equipment Post

123032375
K6226: RNCC: 3 | RNVC: 2
KLPKS72.00-4: RNCC: 5 | RNVC: 2

8 Mar 1985

5340-12-311-0960
Spring Tension Clip

123110960
C22327-Z25-C3: RNCC: 3 | RNVC: 2
C22327Z25C3: RNCC: 5 | RNVC: 2

24 Jul 1987

5340-12-151-4782
Turnbuckle

121514782
23111-0811.00: RNCC: 2 | RNVC: 2
23111-0811.00: RNCC: 3 | RNVC: 2
23111-0811-00: RNCC: 5 | RNVC: 2
23111-0811-00: RNCC: 5 | RNVC: 9
23111-0811.00: RNCC: 5 | RNVC: 9
23111-0811-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-177-4694
Expansion Plug

121774694
4039971420: RNCC: 3 | RNVC: 2
51916060055: RNCC: 5 | RNVC: 2
51.91606-0055: RNCC: 5 | RNVC: 2
51916060055: RNCC: 5 | RNVC: 2
51.91606-0055: RNCC: 5 | RNVC: 2
51.91606-0055: RNCC: 5 | RNVC: 2
51916060055: RNCC: 5 | RNVC: 2

1 Feb 1979

5340-12-340-8640
Angle Bracket

123408640
907731-4000: RNCC: 3 | RNVC: 2
00119407: RNCC: 5 | RNVC: 2
9077314000: RNCC: 5 | RNVC: 2
(241)A39630-119407: RNCC: 5 | RNVC: 2
(241)A396300119407: RNCC: 5 | RNVC: 2

25 Jun 1996

5340-12-345-4880
Nonmetallic Bumper

123454880
2300002-204340.002: RNCC: 2 | RNVC: 2
2300002-204340.002: RNCC: 3 | RNVC: 2
2300002-204340.002: RNCC: 3 | RNVC: 2

24 Mar 1998

5340-12-177-0685
Platte

121770685
2300002-080000.004: RNCC: 2 | RNVC: 2
2300002-080000.004: RNCC: 3 | RNVC: 2
2300002-080000.004: RNCC: 3 | RNVC: 2
2300002-080000-004: RNCC: 5 | RNVC: 9
2300002-080000.004: RNCC: 5 | RNVC: 9

12 Jan 1979

5340-12-349-4044
Access Cover

123494044
SK682-180100.009.0: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-12-156-9024
Compression Cup

121569024
H360-1-88NBR/101: RNCC: 3 | RNVC: 2
H360-1-88NBR101: RNCC: 3 | RNVC: 2
H360-1-14PA101: RNCC: 5 | RNVC: 2
H360-1-14PA101: RNCC: 5 | RNVC: 2
H360-1-14PA101: RNCC: 5 | RNVC: 9
H360-1-14PA101: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-3631
Manual Control Handle

123053631
100332-13161: RNCC: 2 | RNVC: 2
100332-13161: RNCC: 3 | RNVC: 2

25 Apr 1992

5340-12-378-0789
Mounting Bracket

123780789
1404004-300.01: RNCC: 2 | RNVC: 2
1404004-300.01: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-333-4301
Loop Clamp

123334301
DIN3016-1-D2-9-16X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-9-16X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.9-16/15-W1: RNCC: 3 | RNVC: 2
RSGU1100-9-16/15: RNCC: 5 | RNVC: 2
RSGU1.9-16/15: RNCC: 5 | RNVC: 2
DIN3016-D2-9-16X15-W1-2: RNCC: 5 | RNVC: 9
00009157220: RNCC: 5 | RNVC: 9
0915722: RNCC: 5 | RNVC: 9

15 Dec 1993

5340-12-302-9572
Double Angle Bracket

123029572
44-26816: RNCC: 3 | RNVC: 2

12 Feb 1985

5340-12-393-9648
Electromagnetic Lock

123939648
019030.20: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-12-040-6686

5340-12-388-6155
Section Block Clamp

123886155
5809953168: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-12-388-6742
Dust And Moisture Seal Protective Cover

123886742
2314-1021: RNCC: 3 | RNVC: 2

12 Apr 2012

5340-12-335-9617
Mounting Bracket

123359617
6700018-201233.00: RNCC: 2 | RNVC: 2
6700018-201233.00: RNCC: 3 | RNVC: 2

6 Oct 1994

5340-12-316-8382
Mounting Bracket

123168382
5802007-201110.00: RNCC: 2 | RNVC: 2
65.7789.011.00-A001: RNCC: 3 | RNVC: 2

16 Feb 1989

5340-12-348-5185
Manual Control Lever

123485185
81623830095: RNCC: 3 | RNVC: 2
81.62383-0095: RNCC: 5 | RNVC: 2

8 Jul 1999

5340-12-385-2372
Block Clamp

123852372
F1.1787-30-20-00.00-02: RNCC: 3 | RNVC: 2

12 May 2011

5340-12-377-0965
Cushioning Pad

123770965
1030027-972070.002.0: RNCC: 3 | RNVC: 2
1030027-972070.002.0: RNCC: 5 | RNVC: 2

11 Dec 2008

5340-12-314-7404
Mounting Bracket

123147404
23305-312000.86.0: RNCC: 3 | RNVC: 2
23305-312000.86.0: RNCC: 5 | RNVC: 9

4 Aug 1988

5340-12-301-0633
Nonmetallic Bumper

123010633
1423-282.03(4): RNCC: 3 | RNVC: 2

20 Sep 1984

5340-12-359-4399
Vent Plug

123594399
9.02.005.216: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-12-366-1101
Escutcheon Plate

123661101
2500075-560550.001.0: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-343-0792
Angle Bracket

123430792
CF 833 752 A: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-384-8150
Rod End Clevis

123848150
82626800047: RNCC: 3 | RNVC: 2
7108879: RNCC: 5 | RNVC: 2
82.62680-0047: RNCC: 5 | RNVC: 2

31 Mar 2011

5340-12-322-4877
Mounting Plate

123224877
8100397-200-06: RNCC: 2 | RNVC: 2
8100397-200-06: RNCC: 3 | RNVC: 2

27 Aug 1990

5340-12-377-6083
Runner

123776083
315570: RNCC: 3 | RNVC: 2
5283-06-00-04/37: RNCC: 5 | RNVC: 2

28 Jan 2009

5340-12-317-3684
Headless Straight Rod

123173684
00401-035-000: RNCC: 3 | RNVC: 2
401-35: RNCC: 5 | RNVC: 9

3 Apr 1989

5340-12-383-5562
Spring Tension Clip

123835562
LS101/12: RNCC: 3 | RNVC: 2

8 Nov 2010

5340-12-360-9395
Mending Plate

123609395
PIK TVF60/60: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-352-2861
Access Cover

123522861
224-0003-215: RNCC: 3 | RNVC: 9

6 Nov 2000

5340-12-137-5159
Buckle

121375159
DIN5291-20-MS-BLANK: RNCC: 2 | RNVC: 2
20DIN5291MSR0H: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-314-5072
Snap Hook

123145072
245 IS-120X11: RNCC: 3 | RNVC: 9
336921843: RNCC: 5 | RNVC: 2

14 Jul 1988

5340-12-144-6851
Spring Tension Clip

121446851
160-24346-07: RNCC: 3 | RNVC: 2
160-24346-07: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-375-4921
Spring Tension Clip

123754921
026-0450-000: RNCC: 3 | RNVC: 2
0005450773: RNCC: 5 | RNVC: 2

9 Jun 2008

5340-12-176-2795
Webbing Strap

121762795
23290-151083: RNCC: 2 | RNVC: 2
23290-151083: RNCC: 3 | RNVC: 2
23290-151083: RNCC: 5 | RNVC: 2
23290-151083: RNCC: 5 | RNVC: 9
23290-151083: RNCC: 5 | RNVC: 9
000-F3-25X2,5X200-BW-RAL6031: RNCC: 6 | RNVC: 9

23 Nov 1978

5340-12-309-8188
Dust And Moisture Seal Protective Cap

123098188
320-997001-06: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-12-365-3225
Lever Bracket

123653225
AFG072984-01: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-326-9224
Access Cover

123269224
264-1342: RNCC: 3 | RNVC: 2

11 Nov 1991

5340-12-300-3496
Spring Tension Clip

123003496
13575: RNCC: 3 | RNVC: 2
0049883278: RNCC: 5 | RNVC: 2
01-3311: RNCC: 5 | RNVC: 2

26 Jul 1984

5340-12-353-6515
Mounting Plate

123536515
PJ22510/97-015-01-06: RNCC: 3 | RNVC: 2

23 Apr 2001

5340-12-333-8711
Headless Straight Rod

123338711
405-5-17: RNCC: 3 | RNVC: 2
405-5.17: RNCC: 5 | RNVC: 2

18 Feb 1994

5340-12-199-8600
Turnbuckle

121998600
SK165-990073.000.0: RNCC: 3 | RNVC: 2
SK165-990073.000.0: RNCC: 5 | RNVC: 2

8 Jun 1984

5340-12-700-8608
Threaded End Tensioning Tie Rod

127008608
VG95211-ML-127008608: RNCC: 2 | RNVC: 2
155N1221-28-1,5-721: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-6182
Retaining Strap

121876182
635D13040: RNCC: 3 | RNVC: 2
635D13040-1: RNCC: 5 | RNVC: 2

21 Apr 1981

5340-12-703-3139
Retaining Strap

127033139
VG95211-ML-127033139: RNCC: 2 | RNVC: 2
5.12.5312.1290.00: RNCC: 3 | RNVC: 2

3 Apr 2000

5340-12-179-0765
Retaining Strap

121790765
5562631/4: RNCC: 3 | RNVC: 2
5562631-4: RNCC: 5 | RNVC: 2

6 Jun 1979

5340-12-316-1840
Butt Hinge Leaf

123161840
5802261-530000.000: RNCC: 2 | RNVC: 2
5802261-530000.000: RNCC: 3 | RNVC: 2
5802261-530000.000: RNCC: 5 | RNVC: 2
5802261-530000.000: RNCC: 5 | RNVC: 2

29 Dec 1988

5340-12-123-1448
Nut And Bolt Locking Plate

121231448
5165-03-49-01: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-317-4967
Shimmy Damper

123174967
6498040: RNCC: 3 | RNVC: 2
6498-040: RNCC: 5 | RNVC: 2

13 Apr 1989

5340-12-333-8670
Resilient Mount

123338670
3358900101: RNCC: 3 | RNVC: 2
505000-80X44-M12X1,5X25.NR55.ST: RNCC: 5 | RNVC: 2
VG95363-D80X44-M12X1,5X25-NR55ST: RNCC: 5 | RNVC: 9

18 Feb 1994

5340-12-190-4708
Lock-Release Lever

121904708
GN212.1-40-M16-E: RNCC: 3 | RNVC: 2
06370-4161: RNCC: 3 | RNVC: 2
RBN944-E40XM16: RNCC: 3 | RNVC: 2
0541600020: RNCC: 3 | RNVC: 2
E36XM16GN212.1: RNCC: 5 | RNVC: 2
GN212.1-40XM16-E: RNCC: 5 | RNVC: 2
05416.00: RNCC: 5 | RNVC: 2
637-416: RNCC: 5 | RNVC: 9
NLM637-4161: RNCC: 5 | RNVC: 9
NLM6370-4161: RNCC: 5 | RNVC: 9

30 Nov 1981

5340-12-317-0284
Strap Hinge Leaf

123170284
5802196-20144: RNCC: 2 | RNVC: 2
4810388-20144: RNCC: 3 | RNVC: 2
5802196-20144: RNCC: 5 | RNVC: 2

6 Mar 1989

5340-12-342-6181
Mounting Bracket

123426181
U100-3442-100: RNCC: 2 | RNVC: 2
U100-3442-100: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-352-6319
Webbing Strap

123526319
8310-0006: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-320-4620
Angle Bracket

123204620
5802162-201100.09: RNCC: 2 | RNVC: 2
5802162-201100.09: RNCC: 5 | RNVC: 9

17 Jan 1990

5340-12-169-5782
Spring Tension Clip

121695782
LN29789-12: RNCC: 2 | RNVC: 2

27 May 1977

5340-12-151-4337
Buckle

121514337
TY6C1: RNCC: 3 | RNVC: 2
23111-99-0620: RNCC: 5 | RNVC: 2
23111-99-0620: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-2275
Mending Plate

123592275
J92220534-003: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-12-312-2519
Extension Drawer Slide

123122519
1839950: RNCC: 3 | RNVC: 2
75D5.030.001-04: RNCC: 5 | RNVC: 2

9 Dec 1987

5340-12-701-9647
Loop Clamp

127019647
VG95211-ML-127019647: RNCC: 2 | RNVC: 2
01.0254.5120: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-311-6240
Angle Bracket

123116240
64453106: RNCC: 3 | RNVC: 2
5801658-7360.02: RNCC: 5 | RNVC: 9
5801658-7360.02: RNCC: 5 | RNVC: 9

29 Sep 1987

5340-12-358-2402
Mounting Bracket

123582402
J92222536-405: RNCC: 3 | RNVC: 2

1 Oct 2002

5340-12-319-5041
Angle Bracket

123195041
4900059-760300.002.0: RNCC: 3 | RNVC: 2
1503826: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-197-5997
Extension Drawer Slide

121975997
C79123-Z742-A1: RNCC: 3 | RNVC: 2

7 Nov 1983

5340-12-318-7629
Resilient Mount

123187629
DIN95363-C50X45-CR60ST: RNCC: 2 | RNVC: 2
81120-50X45-M10.CR60.ST: RNCC: 5 | RNVC: 2
0716110153: RNCC: 5 | RNVC: 2
VG95363-C50X45-CR60ST: RNCC: 5 | RNVC: 9

15 Aug 1989

5340-12-333-8485
Runner

123338485
532104-4041.000: RNCC: 2 | RNVC: 2
532104-4041.000: RNCC: 3 | RNVC: 2
532104-4041.000: RNCC: 5 | RNVC: 9

17 Feb 1994

5340-12-306-8812
Mending Plate

123068812
C150ZZ60001-000: RNCC: 3 | RNVC: 2

14 Apr 1986

5340-12-382-1365
Angle Bracket

123821365
82155010231: RNCC: 3 | RNVC: 2
82.15501.0231: RNCC: 5 | RNVC: 2
82.15501-0231: RNCC: 5 | RNVC: 2

12 May 2010

5340-12-306-2381
Angle Bracket

123062381
401320-01: RNCC: 3 | RNVC: 2

11 Feb 1986

5340-12-151-8973
Spring Tension Clip

121518973
139-01-12: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-305-8105
Plain Solid Disk

123058105
100375-019100.14A: RNCC: 2 | RNVC: 2

17 Dec 1985

5340-12-356-0437
Retaining Strap

123560437
1015-0007: RNCC: 3 | RNVC: 2

16 Jan 2002

5340-12-182-1583
Quick Release Plunger

121821583
4540319: RNCC: 3 | RNVC: 2
5801602-010106: RNCC: 5 | RNVC: 2
5801602-010106: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-327-6680
Electrical-Mechanical Equipment Post

123276680
C230ZZ30001-000: RNCC: 3 | RNVC: 2

17 Feb 1992

5340-12-310-9927
Mending Plate

123109927
NGE 108-2500.001: RNCC: 3 | RNVC: 2

16 Jul 1987

5340-12-199-7192
Double Angle Bracket

121997192
43712521-301: RNCC: 2 | RNVC: 2
43712521-301: RNCC: 3 | RNVC: 2

25 May 1984

5340-12-702-1851
Angle Bracket

127021851
VG95211-ML-127021851: RNCC: 2 | RNVC: 2
30.7206.200: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-182-2523
Butt Hinge

121822523
2300033-230000-08: RNCC: 2 | RNVC: 2
2300033-230000-08: RNCC: 5 | RNVC: 9
2300033-230000.08: RNCC: 5 | RNVC: 9

21 Jan 1980

5340-12-190-7212
Strap Bolt

121907212
NO PRIMARY REF 12-190-7212: RNCC: 3 | RNVC: 2
25/86087.07: RNCC: 5 | RNVC: 9
7101 908657: RNCC: 5 | RNVC: 9
7101908657: RNCC: 5 | RNVC: 9
25-86087-07: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-334-2309
Extension Drawer Slide

123342309
GC 301-1790: RNCC: 3 | RNVC: 2
GC301-1790: RNCC: 5 | RNVC: 2

18 Apr 1994

5340-12-187-4624
Angle Bracket

121874624
2300109-063136.000.0: RNCC: 2 | RNVC: 2
2300109-063136.000.0: RNCC: 3 | RNVC: 2
2300109-063136.000.0: RNCC: 3 | RNVC: 2
2300109-063136-000-0: RNCC: 5 | RNVC: 9
2300109-063136.000.0: RNCC: 5 | RNVC: 9
2300109-063136-000-0: RNCC: 5 | RNVC: 9
2300109-063136-000-0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-311-3551
Angle Bracket

123113551
VD-41-91-00110-043: RNCC: 3 | RNVC: 2
VD-41-91-00110-043: RNCC: 5 | RNVC: 2
VD-41-91-00110-043: RNCC: 5 | RNVC: 9

21 Aug 1987

5340-12-361-2561
Access Cover

123612561
51916050130: RNCC: 3 | RNVC: 2
51.91605-0130: RNCC: 5 | RNVC: 2

10 Sep 2003

5340-12-322-8501
Mounting Plate

123228501
5802255-040000.005: RNCC: 2 | RNVC: 2
5802255-040000.005: RNCC: 5 | RNVC: 9

28 Sep 1990

5340-12-168-0064
Compression Cup

121680064
T50-23 50X25X12/3-83FKM/575: RNCC: 3 | RNVC: 2
T50-23-83FKM575: RNCC: 5 | RNVC: 2

7 Feb 1977

5340-12-374-4022
Access Cover

123744022
2500298-000220.000.0: RNCC: 3 | RNVC: 2

14 Feb 2008

5340-12-330-2525
Dust And Moisture Seal Protective Cap

123302525
0853 1209.007: RNCC: 3 | RNVC: 2
853 1209 FC T.7: RNCC: 5 | RNVC: 2
8531209.007: RNCC: 5 | RNVC: 2
853 1209 FC9696-60: RNCC: 5 | RNVC: 2

21 Nov 1992

5340-12-322-9780
Mounting Bracket

123229780
702-145510-901-0: RNCC: 3 | RNVC: 2

15 Oct 1990

5340-12-701-6036
Retaining Strap

127016036
VG95211-ML-127016036: RNCC: 2 | RNVC: 2
5.12.6601.8151.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6172
Mounting Bracket

127016172
VG95211-ML-127016172: RNCC: 2 | RNVC: 2
5.12.7010.1660.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-171-1887
Rod End Clevis

121711887
81954900026: RNCC: 3 | RNVC: 2
81.95490-0026: RNCC: 5 | RNVC: 2
81.95490.0026: RNCC: 5 | RNVC: 2

16 Sep 1977

5340-12-360-0969
Mounting Plate

123600969
9418810211: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-358-4434
Bow Handle

123584434
63270028: RNCC: 3 | RNVC: 2
01207-20: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-314-0862
Mending Plate

123140862
272.301 839: RNCC: 2 | RNVC: 2
272.301.839: RNCC: 3 | RNVC: 2
272.301 839: RNCC: 5 | RNVC: 9

4 Jun 1988

5340-12-375-1635
Mounting Plate

123751635
L281M2006101: RNCC: 3 | RNVC: 2

28 Apr 2008

5340-12-348-5618
Mounting Bracket

123485618
78027 44825: RNCC: 2 | RNVC: 2
7802744825: RNCC: 3 | RNVC: 2
78027 44825: RNCC: 5 | RNVC: 9

19 Jul 1999

5340-12-357-7058
Clamping Catch

123577058
323559: RNCC: 3 | RNVC: 2
0006300390: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-333-8436
Nonmetallic Bumper

123338436
1153261668: RNCC: 3 | RNVC: 2
115 326 16 68: RNCC: 5 | RNVC: 2

16 Feb 1994

5340-12-326-5329
Mending Plate

123265329
4110012180: RNCC: 3 | RNVC: 2

1 Oct 1991

5340-12-342-8795
Access Cover

123428795
517.064: RNCC: 3 | RNVC: 2
517.064: RNCC: 5 | RNVC: 9
TMD365645-3EPG500.02/22517.064: RNCC: 5 | RNVC: 9

11 Apr 1997

5340-12-164-9545
Manual Control Handle

121649545
BHB500-304-0602: RNCC: 3 | RNVC: 2
8.216.000.138: RNCC: 5 | RNVC: 2
8.16.001.002.02.00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-199-1870
Coat And Hat Hook

121991870
DIN81407-A-AL-P: RNCC: 2 | RNVC: 2
ADIN81407ALP0L: RNCC: 5 | RNVC: 2
ADIN81407-AL-POL: RNCC: 5 | RNVC: 2

3 Apr 1984

5340-12-347-4902
Mending Plate

123474902
999999-01631-4-0063/3: RNCC: 3 | RNVC: 2
999999-01631-4-0063POS3: RNCC: 5 | RNVC: 9

16 Dec 1998

5340-12-359-7424
Access Cover

123597424
2500261-180000.021.0: RNCC: 2 | RNVC: 2
2500261-180000.021.0: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-190-7501
Manual Control Handle

121907501
23305-264163.00.0: RNCC: 2 | RNVC: 2
23305-264163.00.0: RNCC: 3 | RNVC: 2
23305-264163.00.0: RNCC: 3 | RNVC: 2
23305-264163-00-0: RNCC: 5 | RNVC: 9

10 Dec 1981

5340-12-143-0091
Loop Clamp

121430091
DIN3016-1-A1-8X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-8X15-W1-2: RNCC: 3 | RNVC: 2
RS1.8/15: RNCC: 3 | RNVC: 2
4110015008: RNCC: 5 | RNVC: 2
RS1100-8-15: RNCC: 5 | RNVC: 2
RS1100.8/15: RNCC: 5 | RNVC: 2
DIN3016-A1-8X15-W1-2: RNCC: 5 | RNVC: 9
VG 95931 A 8X15 W1: RNCC: 5 | RNVC: 9
VG95931-A8X15-W1: RNCC: 5 | RNVC: 9
VG95931A8X15W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-314-5383
Dust And Moisture Seal Protective Plug

123145383
1152771974: RNCC: 3 | RNVC: 2
4536226-984: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-348-8723
Nonmetallic Solid Wheel

123488723
245/7346-58-00-04: RNCC: 3 | RNVC: 2

30 Aug 1999

5340-12-164-3985
Loop Clamp

121643985
SVS96/25ZY: RNCC: 3 | RNVC: 2
5650025096: RNCC: 5 | RNVC: 2
SVS96-25ZY: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-365-6361
Angle Bracket

123656361
J92228362-001: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-317-5074
Access Cover

123175074
250148-351400.02.0: RNCC: 3 | RNVC: 2

13 Apr 1989

5340-12-370-2293
Double Angle Bracket

123702293
35645: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-12-320-7048
Angle Bracket

123207048
CF 445 775 B: RNCC: 2 | RNVC: 2
CF 445 775 B: RNCC: 3 | RNVC: 2
CF 445 775 B: RNCC: 5 | RNVC: 2

8 Feb 1990

5340-12-175-5792
Nonmetallic Bumper

121755792
WW 402 912: RNCC: 2 | RNVC: 2
WW 402 912 C: RNCC: 3 | RNVC: 9
WW402912C: RNCC: 5 | RNVC: 2
WW 402 912 C: RNCC: 5 | RNVC: 2
WW402912C: RNCC: 5 | RNVC: 9

3 Oct 1978

5340-12-358-8142
Mounting Bracket

123588142
4.042-870.0: RNCC: 3 | RNVC: 2

18 Nov 2002

5340-12-380-7290
Loop Clamp

123807290
112APPH DP AS M W2: RNCC: 3 | RNVC: 2
21239: RNCC: 5 | RNVC: 2
81974456026: RNCC: 5 | RNVC: 2

24 Nov 2009

5340-12-300-4740
Permanent Magnet

123004740
8567-4: RNCC: 3 | RNVC: 2

4 Aug 1984

5340-12-386-4170
Mounting Bracket

123864170
5272031340: RNCC: 3 | RNVC: 2

31 Aug 2011

5340-12-701-8499
Loop Clamp

127018499
VG95211-ML-127018499: RNCC: 2 | RNVC: 2
5191A-60: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-360-1547
Mounting Bracket

123601547
9428300214: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-340-2919
Runner

123402919
MM 2210 G 006-3: RNCC: 3 | RNVC: 2
MM 2210 G 006-3: RNCC: 5 | RNVC: 9
MM 2210 T 011-4: RNCC: 5 | RNVC: 9

22 Mar 1996

5340-12-162-8470
Dust And Moisture Seal Protective Plug

5340-12-179-6962
Loop Clamp

121796962
6034280284: RNCC: 3 | RNVC: 2
366 078 03 86: RNCC: 5 | RNVC: 2
3660780386: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-12-198-4764
Angle Bracket

121984764
3092950240: RNCC: 3 | RNVC: 2

1 Feb 1984

5340-12-378-3944
Retaining Clip

123783944
071805016402: RNCC: 3 | RNVC: 2
CV155981: RNCC: 5 | RNVC: 2
N 071805 016402: RNCC: 5 | RNVC: 2
N071805016402: RNCC: 5 | RNVC: 9

1 Apr 2009

5340-12-352-3584
Bow Handle

123523584
8-3712.00: RNCC: 2 | RNVC: 2
8-3712.00: RNCC: 3 | RNVC: 2
9906281: RNCC: 5 | RNVC: 2
9906281: RNCC: 5 | RNVC: 9
8-3712.00: RNCC: 5 | RNVC: 9

10 Nov 2000

5340-12-360-7663
Bail Handle

123607663
D0065989-001: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-320-9995
Mending Plate

123209995
2300269-180000.006.0: RNCC: 2 | RNVC: 2
790-10.00.116-25: RNCC: 3 | RNVC: 2

15 Mar 1990

5340-12-157-1676
Turnbuckle Body

121571676
DIN1478-SPM14-ST: RNCC: 2 | RNVC: 2
SPMU-DIN1478-M14-ROH: RNCC: 3 | RNVC: 2
23816: RNCC: 3 | RNVC: 2
5000014S: RNCC: 5 | RNVC: 2
AM14DIN1478: RNCC: 5 | RNVC: 2
SPM14DIN1478: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-5611
Lock-Release Lever

127015611
VG95211-ML-127015611: RNCC: 2 | RNVC: 2
5.12.6114.0390.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-319-0789
Loop Clamp

123190789
2300109-050000.022.0: RNCC: 2 | RNVC: 2
1226556: RNCC: 3 | RNVC: 2
2300109-050000.022.0: RNCC: 5 | RNVC: 2

5 Sep 1989

5340-12-367-1112
Mounting Bracket

123671112
970319508: RNCC: 3 | RNVC: 2
3202-632.90.02.002-000: RNCC: 5 | RNVC: 2

11 Jul 2005

5340-12-340-8838
Resilient Mount

123408838
DIN95366-A5-NR55ST: RNCC: 2 | RNVC: 2
58541BSTN5590: RNCC: 5 | RNVC: 2
58541,NR55ST: RNCC: 5 | RNVC: 2
54.48-2-PART25: RNCC: 5 | RNVC: 2
58541.NR55.ST: RNCC: 5 | RNVC: 2
VG95366-A5-NR55ST: RNCC: 5 | RNVC: 9

27 Jun 1996

5340-12-388-7829
Padlock

123887829
70/45: RNCC: 3 | RNVC: 2

23 Apr 2012

5340-12-374-2487
Mounting Plate

123742487
L521M1068101: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-387-8474
Mounting Bracket

123878474
7093753: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-199-2738
Coat And Hat Hook

121992738
YN171-178-2: RNCC: 2 | RNVC: 2
105904: RNCC: 3 | RNVC: 2
YN171-178-2: RNCC: 5 | RNVC: 2
4244A: RNCC: 5 | RNVC: 9

7 Apr 1984

5340-12-386-2256
Access Cover

123862256
2500261-068130.003.0: RNCC: 2 | RNVC: 2
2500261-068130.003.0: RNCC: 3 | RNVC: 2

17 Aug 2011

5340-12-328-9555
Electrical-Mechanical Equipment Post

123289555
VG95148C5,5XM3X17-NRST: RNCC: 2 | RNVC: 2
VG95148C5,5XM3X17-NRST: RNCC: 3 | RNVC: 2
5.13.174-1.4104: RNCC: 3 | RNVC: 2
5.13.174SA1.4104: RNCC: 5 | RNVC: 2

3 Jul 1992

5340-12-324-9261
Retaining Strap

123249261
DIN3016-1-F1-23X20W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-23X20W1-2: RNCC: 3 | RNVC: 2
RSGU2.23/20-W1-2: RNCC: 3 | RNVC: 2
RSGU2.23/20: RNCC: 5 | RNVC: 2
DIN3016-F1-23X20W1-2: RNCC: 5 | RNVC: 9

10 Apr 1991

5340-12-701-9444
Rod End Clevis

127019444
VG95211-ML-127019444: RNCC: 2 | RNVC: 2
5.12.0605.0373.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-378-1449
Cushioning Pad

123781449
2300223-061520.06.0: RNCC: 3 | RNVC: 2

16 Mar 2009

5340-12-701-7153
Metal Grille

127017153
VG95211-ML-127017153: RNCC: 2 | RNVC: 2
5.12.7601.4050.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-157-0924
Compression Cup

121570924
T60-26 60X35X12/3,5-88NBR/101: RNCC: 3 | RNVC: 2
T60-26: RNCC: 5 | RNVC: 2
T60-26-88NBR101: RNCC: 5 | RNVC: 2
N1764: RNCC: 5 | RNVC: 2
15182-20: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-8028
Butt Hinge

127018028
VG95211-ML-127018028: RNCC: 2 | RNVC: 2
5.12.8102.8561.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-317-9431
Dust And Moisture Seal Protective Cap

123179431
GPN800/3/4"-16UNF: RNCC: 3 | RNVC: 2
GPN800,3/4IN-16UNF: RNCC: 5 | RNVC: 2
800/3/4"-16UNF: RNCC: 5 | RNVC: 2

29 May 1989

5340-12-185-1664
Mending Plate

121851664
43543-0: RNCC: 3 | RNVC: 2
43543: RNCC: 5 | RNVC: 9

16 Sep 1980

5340-12-303-6301
Dust And Moisture Seal Protective Cap

123036301
5400014-1300: RNCC: 2 | RNVC: 2
5400014-1300: RNCC: 5 | RNVC: 9

15 Apr 1985

5340-12-701-2624
Rod End Connector

127012624
VG95211-ML-127012624: RNCC: 2 | RNVC: 2
5.12.4207.1050.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-172-9437
Nonmetallic Bumper

121729437
81960200217: RNCC: 3 | RNVC: 2
FT469/81.010/122/63SH: RNCC: 3 | RNVC: 2
FT469/81.010/122-FLDN6390: RNCC: 3 | RNVC: 2
81.96020-0217: RNCC: 5 | RNVC: 2
MOTORLAGER GR.1.2-63SHORE: RNCC: 5 | RNVC: 2
02486599: RNCC: 5 | RNVC: 2
FT469-81-010-122-63SH: RNCC: 5 | RNVC: 2
2486599EZ8771-79: RNCC: 5 | RNVC: 2

6 Mar 1978

5340-12-351-3382
Loop Clamp

123513382
VG95211-ML-123513382: RNCC: 2 | RNVC: 2
EFP16225-1: RNCC: 3 | RNVC: 2

17 Jul 2000

5340-12-185-9342
Angle Bracket

121859342
4900059-212007.000.0: RNCC: 3 | RNVC: 2
1291453: RNCC: 5 | RNVC: 2
4900059-212007-000-0: RNCC: 5 | RNVC: 2
212007-000-0: RNCC: 5 | RNVC: 9
4900059-212007-000-0: RNCC: 5 | RNVC: 9
4900059-212007.000.0: RNCC: 5 | RNVC: 9

11 Nov 1980

5340-12-390-4636
Lock-Release Lever

123904636
2300559-188323.000.0: RNCC: 2 | RNVC: 2
2300559-188323.000.0: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-12-149-5414
Compression Cup

121495414
H25-26-88NBR/101: RNCC: 3 | RNVC: 2
H25-26: RNCC: 5 | RNVC: 2
H25-26-88NBR101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-322-6672
Butt Hinge

123226672
MEM4-5022G1: RNCC: 3 | RNVC: 2

11 Sep 1990

5340-12-152-5400
Rod End Connector

121525400
E7101-41-100-98: RNCC: 3 | RNVC: 2
164762601: RNCC: 5 | RNVC: 2
7101-41-100.98: RNCC: 5 | RNVC: 9
E7101-41-100-98: RNCC: 5 | RNVC: 9
7101-41-100.98: RNCC: 5 | RNVC: 9
7101-41-100-98: RNCC: 5 | RNVC: 9
7101-41-100-98: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-123-9341
Escutcheon Plate

121239341
5565-06-06-11: RNCC: 3 | RNVC: 2
N92013G1: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-173-0970
Nonmetallic Bumper

121730970
DIN95364-D145X45-M20X50-NR55ST: RNCC: 2 | RNVC: 2
551000-145X45-M20X50.NR55.ST: RNCC: 5 | RNVC: 2
2073870: RNCC: 5 | RNVC: 2
465111: RNCC: 5 | RNVC: 2
465111: RNCC: 5 | RNVC: 2
VG95364-D145X45-M20X50-NR55ST: RNCC: 5 | RNVC: 9

20 Mar 1978

5340-12-194-9491
Resilient Mount

121949491
DIN95363-F15X20-M5-NR55ST: RNCC: 2 | RNVC: 2
525001-MS.NR55.ST: RNCC: 5 | RNVC: 2
81180-15X20-M5.NR55.ST: RNCC: 5 | RNVC: 2
VG95363-F15X20-M5-NR55ST: RNCC: 5 | RNVC: 9
BC4-00: RNCC: 5 | RNVC: 9
BC4.00/25N: RNCC: 5 | RNVC: 9

21 Dec 1982

5340-12-182-8980
Platte

121828980
2500045-1020.05: RNCC: 2 | RNVC: 2
2500045-1020.05: RNCC: 3 | RNVC: 2
2500045-1020-05: RNCC: 5 | RNVC: 2
2500045-1020-05: RNCC: 5 | RNVC: 9
2500045-1020-05: RNCC: 5 | RNVC: 9
2500045-1020.05: RNCC: 5 | RNVC: 9

4 Mar 1980

5340-12-386-3255
Dust And Moisture Seal Protective Cap Set

123863255
800566: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-372-3556
Spring Tension Clip

123723556
03.9305-1031.0/02: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-12-177-7224
Platte

121777224
2300002-205110.009: RNCC: 2 | RNVC: 2
2300002-205110.009: RNCC: 3 | RNVC: 2
2300002-205110.009: RNCC: 3 | RNVC: 2
2300002-205110.009: RNCC: 5 | RNVC: 9
2300002-205110-009: RNCC: 5 | RNVC: 9

14 Feb 1979

5340-12-164-3976
Loop Clamp

121643976
DIN3016-1-A1-30X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-30X15-W1-2: RNCC: 3 | RNVC: 2
RS1.30/15: RNCC: 3 | RNVC: 2
RS1100-30-15: RNCC: 5 | RNVC: 2
RS1100.30/15: RNCC: 5 | RNVC: 2
4110015030: RNCC: 5 | RNVC: 2
VG95931A30X15W1: RNCC: 5 | RNVC: 9
VG95931-A30X15-W1: RNCC: 5 | RNVC: 9
DIN3016-A1-30X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-7905
Electrical-Mechanical Equipment Post

123287905
590601-3767.000: RNCC: 3 | RNVC: 2

24 Jun 1992

5340-12-338-8225
Multiple Angle Bracket

123388225
463-062410.001: RNCC: 3 | RNVC: 9

29 Aug 1995

5340-12-325-4216
Rod End Clevis

123254216
0026-2101-000: RNCC: 3 | RNVC: 2
WSN26-0092-00-44X34-1.4404: RNCC: 5 | RNVC: 2
0026-2101-000: RNCC: 5 | RNVC: 9
WSN26-0092-00-44X34-1.4404: RNCC: 5 | RNVC: 9

5 Jun 1991

5340-12-168-2770
Loop Clamp

121682770
DIN3016-2-H1-102X9-W1-2-CR: RNCC: 2 | RNVC: 2
SPGU102/9ZY: RNCC: 3 | RNVC: 2
DIN3016-H1-102X9-W1-2: RNCC: 3 | RNVC: 2
1219000102: RNCC: 5 | RNVC: 2
SPGU102-9ZY: RNCC: 5 | RNVC: 2
VG95931-K102X9-W1: RNCC: 5 | RNVC: 9
VG95931K102X9W1: RNCC: 5 | RNVC: 9
DIN3016-H1-102X9-W1-2: RNCC: 5 | RNVC: 9

4 Mar 1977

5340-12-177-2799
Angle Bracket

121772799
2300002-122400.010: RNCC: 2 | RNVC: 2
2300002-122400.010: RNCC: 3 | RNVC: 2
2300002-122400-010: RNCC: 5 | RNVC: 9
2300002-122400.010: RNCC: 5 | RNVC: 9

24 Jan 1979

5340-12-338-8542
Mounting Plate

123388542
463-223065.002: RNCC: 3 | RNVC: 9
9898544: RNCC: 5 | RNVC: 9

31 Aug 1995

5340-12-185-9349
Mounting Bracket

121859349
4900059-751290.002.0: RNCC: 3 | RNVC: 2
1227619: RNCC: 5 | RNVC: 2
4900059-751290-002-0: RNCC: 5 | RNVC: 2
751290-002-0: RNCC: 5 | RNVC: 9
4900059-751290.002.0: RNCC: 5 | RNVC: 9
4900059-751290-002-0: RNCC: 5 | RNVC: 9

11 Nov 1980

5340-12-329-6661
Loop Clamp

123296661
DIN3015-L-KP-2-R-18-AL: RNCC: 2 | RNVC: 2
RAAR-218: RNCC: 3 | RNVC: 2
218AL: RNCC: 3 | RNVC: 2
RAAR-218: RNCC: 5 | RNVC: 2

16 Sep 1992

5340-12-185-1978
Clamping Catch

121851978
V951L03-1-5AF: RNCC: 3 | RNVC: 2
V951L03-1X5AF: RNCC: 5 | RNVC: 2
51L3-1-5AA: RNCC: 5 | RNVC: 2
51L53-1-5AA: RNCC: 5 | RNVC: 2
C 3753 142 AA: RNCC: 5 | RNVC: 2
C3753142AA: RNCC: 5 | RNVC: 2
0844792: RNCC: 5 | RNVC: 2
C 3753 142 AA: RNCC: 5 | RNVC: 2
C3753142AA: RNCC: 5 | RNVC: 2

20 Sep 1980

5340-12-360-8061
Access Cover

123608061
502378: RNCC: 3 | RNVC: 2
19-1000-080: RNCC: 5 | RNVC: 2

14 Jul 2003

5340-12-331-7136
Plain Solid Disk

123317136
4-127673: RNCC: 3 | RNVC: 2
206 914: RNCC: 5 | RNVC: 2

14 Jun 1993

5340-12-185-5091
Metal Runner

121855091
C104-A24-C9: RNCC: 3 | RNVC: 2
C104A24C9: RNCC: 5 | RNVC: 2

11 Oct 1980

5340-12-153-5255
Nut And Bolt Locking Plate

121535255
100355-212000.10: RNCC: 2 | RNVC: 2
100355-212000-10: RNCC: 3 | RNVC: 2
100355-212000-10: RNCC: 5 | RNVC: 9
100355-212000-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-314-1037
Mounting Bracket

123141037
A10-37-372-00-0: RNCC: 3 | RNVC: 2
A10-37-372-00-0: RNCC: 5 | RNVC: 9
85-693-6940: RNCC: 6 | RNVC: 9

7 Jun 1988

5340-12-340-4103
Runner

123404103
489-310003-901-0: RNCC: 2 | RNVC: 2
489-310003-901-0: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-12-316-5699
Access Cover

123165699
4139 306 001: RNCC: 3 | RNVC: 2
(241)A39630-120747: RNCC: 5 | RNVC: 2
(241)A396300120747: RNCC: 5 | RNVC: 2
00120747: RNCC: 5 | RNVC: 2
4139-306-001: RNCC: 5 | RNVC: 2
4139306001: RNCC: 5 | RNVC: 2
4139 306 001: RNCC: 5 | RNVC: 2
100CP3278: RNCC: 5 | RNVC: 2

25 Jan 1989

5340-12-348-8707
Mounting Bracket

123488707
245/7346-64-10-00: RNCC: 3 | RNVC: 2

30 Aug 1999

5340-12-181-7958
Mounting Bracket

121817958
NO PRIMARY REF 12-181-7958: RNCC: 3 | RNVC: 2
021166: RNCC: 5 | RNVC: 9

17 Dec 1979

5340-12-181-2640
Dust And Moisture Seal Protective Plug

121812640
0000100019: RNCC: 3 | RNVC: 2

7 Nov 1979

5340-12-180-0428
Resilient Mount

121800428
3122401017: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-196-0193
Headless Straight Rod

121960193
23303-150510.01: RNCC: 2 | RNVC: 2
619-55.10.111-02: RNCC: 3 | RNVC: 2
619-55-10-111-02: RNCC: 5 | RNVC: 2
23303-150510-01: RNCC: 5 | RNVC: 9
23303-150510.01: RNCC: 5 | RNVC: 9

17 May 1983

5340-12-322-6116
Lock-Release Lever

123226116
4002.021.02.00/035: RNCC: 3 | RNVC: 2
0813456: RNCC: 5 | RNVC: 2
4002.21.02/35: RNCC: 5 | RNVC: 2
0813456: RNCC: 5 | RNVC: 2
813456: RNCC: 5 | RNVC: 2

6 Sep 1990

5340-12-177-9757
Retaining Band

121779757
23114-3224.02: RNCC: 2 | RNVC: 2
23114-3224.02: RNCC: 3 | RNVC: 2
23114-3224-02: RNCC: 5 | RNVC: 2
23114-3224-02: RNCC: 5 | RNVC: 9
23114-3224-02: RNCC: 5 | RNVC: 9
23114-3224.02: RNCC: 5 | RNVC: 9

13 Mar 1979

5340-12-314-5916
Access Cover

123145916
512214-0247.000: RNCC: 3 | RNVC: 2
512214-0247: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-12-324-0614
Resilient Mount

123240614
DIN95363-D30X30-NR55ST: RNCC: 2 | RNVC: 2
505014-M8X20-NR55.ST: RNCC: 5 | RNVC: 2
4609880411: RNCC: 5 | RNVC: 2
VG95363-D30X30-NR55ST: RNCC: 5 | RNVC: 9
BI6.23.25N: RNCC: 5 | RNVC: 9

18 Jan 1991

5340-12-310-9660
Metal Runner

123109660
272.315 240: RNCC: 2 | RNVC: 2
272.315.240: RNCC: 3 | RNVC: 2
272.315 240: RNCC: 5 | RNVC: 9

14 Jul 1987

5340-12-353-4246
Mounting Bracket

123534246
3100-600: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-12-199-5309
Angle Bracket

121995309
8371502073: RNCC: 3 | RNVC: 2

9 May 1984

5340-12-373-9918
Mounting Plate

123739918
L231M4809101: RNCC: 3 | RNVC: 2

8 Jan 2008

5340-12-304-4822
Angle Bracket

123044822
2300034-290000.33: RNCC: 2 | RNVC: 2
2300034-290000.33: RNCC: 3 | RNVC: 2
2300034-290000.33: RNCC: 5 | RNVC: 9
2300034-290000.33: RNCC: 5 | RNVC: 9

23 Jul 1985

5340-12-356-7155
Compression Cup

123567155
075121289: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-353-1803
Retaining Strap

123531803
L157114: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-352-8822
Access Cover

123528822
5000 000 097: RNCC: 3 | RNVC: 2

2 Jan 2001

5340-12-322-2541
Mounting Plate

123222541
10 0014 471: RNCC: 2 | RNVC: 2
10 0014 471: RNCC: 3 | RNVC: 2
04.54150-16302.00.4: RNCC: 5 | RNVC: 2

6 Aug 1990

5340-12-369-1511
Multiple Angle Bracket

123691511
7803061160: RNCC: 2 | RNVC: 2
7803061160: RNCC: 3 | RNVC: 2

30 May 2006

5340-12-701-2621
Mounting Bracket

127012621
VG95211-ML-127012621: RNCC: 2 | RNVC: 2
5.12.4207.1030.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-3697
Mounting Plate

127023697
VG95211-ML-127023697: RNCC: 2 | RNVC: 2
5.12.0603.0712.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-4718
Mounting Bracket

127014718
VG95211-ML-127014718: RNCC: 2 | RNVC: 2
5.12.5314.8310.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-7473
Casement Fastener

123427473
704259577-EK333: RNCC: 3 | RNVC: 2

24 Mar 1997

5340-12-164-9855
Dust And Moisture Seal Protective Cap

121649855
2402-29-10.40: RNCC: 3 | RNVC: 2
34-010-27: RNCC: 5 | RNVC: 2
2402-29-10.20: RNCC: 5 | RNVC: 2
E 2402-29-10.20: RNCC: 5 | RNVC: 9
2412-29-10.00: RNCC: 5 | RNVC: 9
E 2402-29-10.40: RNCC: 5 | RNVC: 9
E 2412-29-10.00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-0158
Double Angle Bracket

123130158
P-086147-013: RNCC: 3 | RNVC: 2
P086147-013: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-700-6582
Dust And Moisture Seal Protective Cap

127006582
VG95211-ML-127006582: RNCC: 2 | RNVC: 2
94-4003-98: RNCC: 3 | RNVC: 2
0501420925949: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-184-1268
Expansion Shield

121841268
354-0130-200: RNCC: 3 | RNVC: 2
181813199: RNCC: 5 | RNVC: 2
254FD0209-00: RNCC: 5 | RNVC: 9

26 Jun 1980

5340-12-340-6573
Spring Holder

123406573
CS 0 RH: RNCC: 3 | RNVC: 2
CS0RH (IDVCS065-117.895): RNCC: 5 | RNVC: 2
PL E 7/2 P-27: RNCC: 5 | RNVC: 2

21 May 1996

5340-12-303-4234
Spring Tension Clip

123034234
12105-PHO: RNCC: 3 | RNVC: 2
0049886578: RNCC: 5 | RNVC: 2
01-1716-PHO: RNCC: 5 | RNVC: 2
721 2 85 329 1: RNCC: 5 | RNVC: 9

21 Mar 1985

5340-12-192-2227
Snap Hook

121922227
DIN5299-C70BK: RNCC: 2 | RNVC: 2
DIN5299-C70-ROH: RNCC: 3 | RNVC: 2
245-70X7 BLANK: RNCC: 3 | RNVC: 9
4521: RNCC: 5 | RNVC: 2

1 Apr 1982

5340-12-352-9055
Handwheel

123529055
E0000251: RNCC: 3 | RNVC: 2
NW32PN16-334N-H-RG-13A: RNCC: 5 | RNVC: 2

4 Jan 2001

5340-12-340-4109
Mechanical Stop

123404109
CS032-3: RNCC: 3 | RNVC: 2
CS032-3 (IDVCS065-117.895): RNCC: 5 | RNVC: 2

10 Apr 1996

5340-12-312-4085
Nonmetallic Bumper

123124085
2300216-100000.001.0: RNCC: 2 | RNVC: 2
2300216-100000.001.0: RNCC: 3 | RNVC: 2
2300216-100000.001.0: RNCC: 3 | RNVC: 2
837.2300216-100000.001.0: RNCC: 3 | RNVC: 2
418-11.49.511-07: RNCC: 5 | RNVC: 2
2300216-100000.001.0: RNCC: 5 | RNVC: 9

29 Dec 1987

5340-12-168-9880
Expansion Plug

121689880
DIN443-B25-ST-ROH: RNCC: 2 | RNVC: 2
933537R1: RNCC: 5 | RNVC: 2
B25DIN443R0H: RNCC: 5 | RNVC: 2
01152710: RNCC: 5 | RNVC: 2
6-0215-21-8-0025: RNCC: 5 | RNVC: 9
6.0215.21.8.0025: RNCC: 5 | RNVC: 9

13 Apr 1977

5340-12-180-6341
Mending Plate

121806341
C106-A39-C30: RNCC: 2 | RNVC: 2
C106A39C30: RNCC: 3 | RNVC: 2
C106A39C30: RNCC: 5 | RNVC: 2
C106-A39-C30: RNCC: 5 | RNVC: 2
C106-A39-C30: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-365-3327
Elbow Catch

123653327
2500075-195430.000.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-310-4579
Resilient Mount

123104579
60130001-F: RNCC: 3 | RNVC: 2
E1N 2296 S03: RNCC: 3 | RNVC: 2
E1N2296S03: RNCC: 5 | RNVC: 2
VG95365-B3-NR-ST: RNCC: 5 | RNVC: 9

22 May 1987

5340-12-354-8983
Loop Clamp

123548983
DIN3016-1-B1-6X12-W1: RNCC: 2 | RNVC: 2
DIN3016-B1-6X12-W1: RNCC: 5 | RNVC: 9

4 Sep 2001

5340-12-176-3591
Angle Bracket

121763591
2661-121: RNCC: 3 | RNVC: 2
2661121: RNCC: 5 | RNVC: 2

27 Nov 1978

5340-12-314-5939
Angle Bracket

123145939
512214-0331.000: RNCC: 3 | RNVC: 2
512214-0331: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-12-188-2635
Mounting Plate

121882635
4312 712 20020: RNCC: 3 | RNVC: 2
431271220020: RNCC: 5 | RNVC: 2
5801685-111300.01: RNCC: 5 | RNVC: 9
5801685-111300-01: RNCC: 5 | RNVC: 9

23 Jun 1981

5340-12-702-5823
Mounting Bracket

127025823
VG95211-ML-127025823: RNCC: 2 | RNVC: 2
5.51.9202.0010.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-362-7282
Webbing Strap

123627282
79017/026-1200-0200: RNCC: 3 | RNVC: 2

24 Mar 2004

5340-12-180-8848
Angle Bracket

121808848
2500035-127000-00: RNCC: 2 | RNVC: 2
2500035-127000-00: RNCC: 5 | RNVC: 2
2500035-127000.00: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-702-4923
Rod End Connector

127024923
VG95211-ML-127024923: RNCC: 2 | RNVC: 2
5.51.5101.0870.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-326-3315
Lock-Release Lever

123263315
2300232-184203.000.0: RNCC: 2 | RNVC: 2
2300232-184203.000.0: RNCC: 3 | RNVC: 2

2 Sep 1991

5340-12-702-5390
Mounting Bracket

127025390
VG95211-ML-127025390: RNCC: 2 | RNVC: 2
5.51.7204.1570.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-3247
Rod End Connector

127013247
VG95211-ML-127013247: RNCC: 2 | RNVC: 2
5.12.5101.8310.93: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-364-2501
Expansion Plug

123642501
DIN470-12-ST-A3P: RNCC: 2 | RNVC: 2
000470012001: RNCC: 5 | RNVC: 2

3 Sep 2004

5340-12-365-0773
Mechanical Stop

123650773
GLD99-00-112000.34: RNCC: 3 | RNVC: 2

26 Nov 2004

5340-12-381-0397
Access Cover

123810397
9HB407007-10: RNCC: 3 | RNVC: 2
407007-10: RNCC: 5 | RNVC: 2

4 Jan 2010

5340-12-162-5281
Flush Lock

121625281
HS5034-8-15-7-1: RNCC: 3 | RNVC: 2
1179571: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-392-6397
Dust And Moisture Seal Protective Plug Set

123926397
0964764026: RNCC: 3 | RNVC: 2

26 Jun 2013

5340-12-188-9459
Detent Plunger

121889459
2500075-193000.001.0: RNCC: 2 | RNVC: 2
2500075-193000.001.0: RNCC: 3 | RNVC: 2
2500075-193000-001-0: RNCC: 5 | RNVC: 9
2500075-193000-001-0: RNCC: 5 | RNVC: 9
2500075-193000.001.0: RNCC: 5 | RNVC: 9

11 Aug 1981

5340-12-317-2252
T Plate

123172252
23223-038210.00.0: RNCC: 2 | RNVC: 2
23223-038210.00.0: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-12-364-4781
Leather Strap

123644781
T251M3001223: RNCC: 2 | RNVC: 2
T251M3001223: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-355-5468
Mounting Plate

123555468
8470403121: RNCC: 3 | RNVC: 2
06440P004065: RNCC: 5 | RNVC: 2

22 Nov 2001

5340-12-390-0484
Mounting Bracket

123900484
DF 410 080 A: RNCC: 3 | RNVC: 2
DF 410 080 A: RNCC: 5 | RNVC: 2

27 Sep 2012

5340-12-323-4082
Angle Bracket

123234082
6010700740: RNCC: 3 | RNVC: 2

23 Nov 1990

5340-12-369-0736
Angle Bracket

123690736
7803221109AA: RNCC: 3 | RNVC: 2
1030010-721000.009.0: RNCC: 5 | RNVC: 2

18 May 2006

5340-12-192-3309
Sealing Plug Assembly

121923309
4609970386: RNCC: 3 | RNVC: 2
721 1 52 017 1: RNCC: 5 | RNVC: 9

15 Apr 1982

5340-12-170-1251
Schluessel

121701251
4673134: RNCC: 3 | RNVC: 2

27 Jun 1977

5340-12-304-3334
Door Closer Dog

123043334
1 34 618: RNCC: 3 | RNVC: 9

5 Jul 1985

5340-12-189-4062
Loop Clamp

121894062
LN9491BK50: RNCC: 2 | RNVC: 2

24 Sep 1981

5340-12-359-1517
Mounting Bracket

123591517
ZG5200G432: RNCC: 3 | RNVC: 2
ZG5200G432: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-320-0941
Spring Tension Clip

123200941
3899930007: RNCC: 3 | RNVC: 2

6 Dec 1989

5340-12-701-9532
Rod End Clevis

127019532
VG95211-ML-127019532: RNCC: 2 | RNVC: 2
5.12.6400.0102.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-392-6518
Electronic Equipment Hardware Kit

123926518
Y10187-003100.000.0: RNCC: 3 | RNVC: 2

26 Jun 2013

5340-12-133-2819

5340-12-011-7133

5340-12-346-8339
Mounting Bracket

123468339
205-040-202-5003: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-12-342-9647
Angle Bracket

123429647
VG95211-ML-123429647: RNCC: 2 | RNVC: 2
590601-0333.000: RNCC: 3 | RNVC: 2
590601-0333.000: RNCC: 5 | RNVC: 2
590601-0333.000: RNCC: 5 | RNVC: 9

17 Apr 1997

Load More Results