What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 139 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 139 of 178

5340-12-322-9621
Access Cover

123229621
230091: RNCC: 3 | RNVC: 9
1865-010300.01.0: RNCC: 3 | RNVC: 9

11 Oct 1990

5340-12-313-1948
Retaining Strap

123131948
615.06-12-00-00-017: RNCC: 3 | RNVC: 2
111066: RNCC: 5 | RNVC: 2

10 Mar 1988

5340-12-320-8550
Mounting Bracket

123208550
2654-330260.01: RNCC: 2 | RNVC: 2
2654-330260.01: RNCC: 3 | RNVC: 2
2654-330 260.01: RNCC: 5 | RNVC: 9
679-00150000.01: RNCC: 5 | RNVC: 9
679-00150000.01: RNCC: 5 | RNVC: 9

28 Feb 1990

5340-12-302-1902
Mending Plate

123021902
1753762: RNCC: 3 | RNVC: 2
75E5.3.65-172: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-183-4735
Electrical-Mechanical Equipment Post

121834735
VG95148B4XM2X8,5-2.0402.30-E2A: RNCC: 2 | RNVC: 2
VG95148B4XM2X8,5-2.0402.30-E2A: RNCC: 3 | RNVC: 2
43709412-601: RNCC: 3 | RNVC: 2

22 Apr 1980

5340-12-332-5624
Bow Handle

123325624
GN528-PA-179-SW: RNCC: 3 | RNVC: 2

20 Aug 1993

5340-12-315-5291
Mending Plate

123155291
5803471-201200.04: RNCC: 2 | RNVC: 2
65.7789.415.04-A001: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-12-310-6787
Angle Bracket

123106787
2300013-1207.00: RNCC: 2 | RNVC: 2
2300013-1207.00: RNCC: 3 | RNVC: 2
2300013-1207.00: RNCC: 5 | RNVC: 9

19 Jun 1987

5340-12-120-8053
Retaining Strap

121208053
DIN72571-1X8-ST-GESCHWAERZT: RNCC: 2 | RNVC: 2
DIN72571-1X8-ST-GESCHWAERZT: RNCC: 3 | RNVC: 2
1X8DIN72571STGESCHWAERZT: RNCC: 5 | RNVC: 2
5730056: RNCC: 5 | RNVC: 2
66378: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-195-3618
Nonmetallic Bumper

121953618
15-142: RNCC: 3 | RNVC: 2
3512 110 14006: RNCC: 5 | RNVC: 2

15 Feb 1983

5340-12-333-6035
Access Cover

123336035
C76-613120.01: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-12-195-8069
Double Angle Bracket

121958069
160-26701-02: RNCC: 3 | RNVC: 2
160-26701-02: RNCC: 5 | RNVC: 9

19 Apr 1983

5340-12-309-1194
Retaining Strap

123091194
5802206-156000: RNCC: 2 | RNVC: 2
5358602: RNCC: 3 | RNVC: 2

16 Dec 1986

5340-12-182-1498
Dust And Moisture Seal Protective Cap

121821498
5801215-02131: RNCC: 3 | RNVC: 2
5801215-02131: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-374-1510
Nonmetallic Bumper

123741510
6.339-084.0: RNCC: 2 | RNVC: 2
6.339-084.0: RNCC: 3 | RNVC: 2

23 Jan 2008

5340-12-126-4056
Helical Compression Spring Seat

121264056
65051953300: RNCC: 3 | RNVC: 2
73-53-1: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-316-2479
Door Handle

123162479
NO PRIMARY REF 12-316-2479: RNCC: 3 | RNVC: 2
M/6299/0/4: RNCC: 5 | RNVC: 9

4 Jan 1989

5340-12-156-3282
Retaining Band

121563282
7101-54-100-62: RNCC: 3 | RNVC: 2
162574302: RNCC: 5 | RNVC: 2
7101-54-100-62: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-0919
Angle Bracket

121970919
1000154-000.03: RNCC: 2 | RNVC: 2
512.00-00.03: RNCC: 3 | RNVC: 2
1000154-0.03: RNCC: 5 | RNVC: 9

19 Sep 1983

5340-12-702-0043
Loop Clamp

127020043
VG95211-ML-127020043: RNCC: 2 | RNVC: 2
1667S50-9,5: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-318-8654
Nonmetallic Bumper

123188654
DIN95364-D26X18-NR60ST-M6X22: RNCC: 2 | RNVC: 2
811.035.026.018.6X22.NR60.ST: RNCC: 5 | RNVC: 2
3018131-60SHORE: RNCC: 5 | RNVC: 2
3018131/11MN60: RNCC: 5 | RNVC: 2
42204144: RNCC: 5 | RNVC: 2
42204144EE5511-29: RNCC: 5 | RNVC: 2
VG95364-D26X18-NR60ST-M6X22: RNCC: 5 | RNVC: 9

22 Aug 1989

5340-12-317-8427
Mounting Bracket

123178427
1000192-01 4 40000.01: RNCC: 2 | RNVC: 2
1000192-01 4 40000.01: RNCC: 3 | RNVC: 2
1000192-01 4 40000.01: RNCC: 5 | RNVC: 9

19 May 1989

5340-12-701-5684
Mounting Bracket

127015684
VG95211-ML-127015684: RNCC: 2 | RNVC: 2
5.12.6149.0020.13: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-7899
Helical Compression Spring Retainer

123427899
93-57-1-08-0322: RNCC: 3 | RNVC: 2

1 Apr 1997

5340-12-304-8544
Loop Clamp

123048544
3735338KZ3138-01: RNCC: 3 | RNVC: 2
8C32560.0-001 TEIL4: RNCC: 5 | RNVC: 2

28 Aug 1985

5340-12-357-6526
Access Cover

123576526
9997001-992000.021.0: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-12-311-0560
Angle Bracket

123110560
2500179-194520.000.0: RNCC: 2 | RNVC: 2
2500179-194520.000.0: RNCC: 3 | RNVC: 2

22 Jul 1987

5340-12-383-7801
Angle Bracket

123837801
540008-4068-A: RNCC: 2 | RNVC: 2
540008-4068-A: RNCC: 3 | RNVC: 2

7 Dec 2010

5340-12-190-6113
Electrical-Mechanical Equipment Post

121906113
VG95148B5XM2X12,5-ST: RNCC: 2 | RNVC: 2
VG95148B5XM2X12,5-ST: RNCC: 3 | RNVC: 2
0356122135899: RNCC: 5 | RNVC: 9
035 6122 135899: RNCC: 5 | RNVC: 9

7 Dec 1981

5340-12-161-4100
Retaining Strap

121614100
BSS28,5X25X3: RNCC: 3 | RNVC: 2
BSS28,5X25X3-ST37-2GALZN8C: RNCC: 5 | RNVC: 2
05300000028: RNCC: 5 | RNVC: 2
5300000028: RNCC: 5 | RNVC: 2
5300000028GALZN8C: RNCC: 5 | RNVC: 2
5307000028: RNCC: 5 | RNVC: 2
BSS28,5X25X3 VERP.: RNCC: 5 | RNVC: 2
BSS28-5X25X3: RNCC: 5 | RNVC: 2
BSS28-5X25X3ST37-2GALZN8C: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-309-8109
Double Angle Bracket

123098109
A-244823-015: RNCC: 3 | RNVC: 2
A244823-015: RNCC: 5 | RNVC: 2

5 Mar 1987

5340-12-300-9877
Resilient Mount

123009877
DIN95369-A3-7-M12-M-ST: RNCC: 2 | RNVC: 2
151005-M12-HD.ST-90: RNCC: 5 | RNVC: 2
60-200-090 HD-M12: RNCC: 5 | RNVC: 2
C2150 HDS M12: RNCC: 5 | RNVC: 2
VG95369-A3-7-M12-MVQ-H-ST: RNCC: 5 | RNVC: 9
C2150HDSM12: RNCC: 5 | RNVC: 9

15 Sep 1984

5340-12-325-6574
Dust And Moisture Seal Protective Cap

123256574
800R1/2": RNCC: 3 | RNVC: 2
GPN800,R1-2IN: RNCC: 5 | RNVC: 2
GPN800,R1/2": RNCC: 5 | RNVC: 2
1022576T00: RNCC: 5 | RNVC: 2
800G1-2": RNCC: 5 | RNVC: 2

26 Jun 1991

5340-12-333-3541
Mounting Plate

123333541
702-438000-904-0: RNCC: 3 | RNVC: 2

6 Dec 1993

5340-12-321-9419
Metal Runner

123219419
702-141300-951-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-701-6858
Angle Bracket

127016858
VG95211-ML-127016858: RNCC: 2 | RNVC: 2
5.12.7220.2043.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-338-2062
Mounting Plate

123382062
706-133340-000-0: RNCC: 3 | RNVC: 2

6 Jun 1995

5340-12-165-0453
Bail Handle

121650453
VG95534A95-ST: RNCC: 2 | RNVC: 2
3401: RNCC: 3 | RNVC: 2
VG95534A95-ST: RNCC: 3 | RNVC: 2
A95VG95534ST: RNCC: 5 | RNVC: 2
A95VG95534ST: RNCC: 5 | RNVC: 2
101659: RNCC: 5 | RNVC: 2
5-290-31.2: RNCC: 5 | RNVC: 9
6019 043794: RNCC: 5 | RNVC: 9
997 6019 043794: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-2056
Angle Bracket

123012056
A-295038-403: RNCC: 3 | RNVC: 2
A295038-403: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-304-6524
Swivel Caster

123046524
LH-SETH250P-ST: RNCC: 3 | RNVC: 2
LH-SE-TH250P-V-STOP-TOP: RNCC: 5 | RNVC: 2
LHSETH250PVST0PT0P: RNCC: 5 | RNVC: 2
M4ZS711D2053: RNCC: 5 | RNVC: 2

8 Aug 1985

5340-12-337-4608
Mounting Bracket

123374608
2500255-320500.00.0: RNCC: 3 | RNVC: 2
2500255-320500-00-0: RNCC: 5 | RNVC: 9

7 Mar 1995

5340-12-178-9096
Helical Compression Spring Seat

121789096
5561332/4: RNCC: 3 | RNVC: 2
5561332-4: RNCC: 5 | RNVC: 2
5561332-4A: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-188-6791
Butt Hinge

121886791
A-245875-007: RNCC: 3 | RNVC: 2
A245875-007: RNCC: 5 | RNVC: 2

23 Jul 1981

5340-12-310-1799
Retaining Strap

123101799
KLEMMSCHELLE15: RNCC: 3 | RNVC: 2
6.373-058.0: RNCC: 5 | RNVC: 2
6.373-058: RNCC: 5 | RNVC: 9

15 Apr 1987

5340-12-194-7165
Pipe Bracket

121947165
571-039-15-00-09-0: RNCC: 3 | RNVC: 2
L07571-039-15-00-09-0: RNCC: 5 | RNVC: 2
L07571-039-15-00-09-0: RNCC: 5 | RNVC: 9

30 Nov 1982

5340-12-378-3642
Mounting Bracket

123783642
41028801: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-12-339-4504
Mounting Plate

123394504
4220 306 069: RNCC: 3 | RNVC: 2
4220306069: RNCC: 5 | RNVC: 2

24 Nov 1995

5340-12-393-3679
Casement Fastener

123933679
0322393: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-12-185-3300
Door Handle

121853300
72L2-2-1AB: RNCC: 3 | RNVC: 2
V72L26-1-1AA: RNCC: 5 | RNVC: 2

30 Sep 1980

5340-12-198-2918
Angle Bracket

121982918
C42080-A6-F3: RNCC: 3 | RNVC: 2

11 Jan 1984

5340-12-378-0699
Mounting Bracket

123780699
320.001-072: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-324-9617
Electrical-Mechanical Equipment Post

123249617
58R055-12-1: RNCC: 3 | RNVC: 2

16 Apr 1991

5340-12-331-2477
Angle Bracket

123312477
2300232-068300.002.0: RNCC: 2 | RNVC: 2
2300232-068300.002.0: RNCC: 3 | RNVC: 2

7 Apr 1993

5340-12-338-2619
Spring Tension Clip

123382619
NR.850/8-GZ: RNCC: 3 | RNVC: 2
NR.291 GR.8: RNCC: 3 | RNVC: 9
850/8: RNCC: 5 | RNVC: 2
1855/6: RNCC: 5 | RNVC: 2
L.S.101/20: RNCC: 5 | RNVC: 2
LS101/20: RNCC: 5 | RNVC: 2
NR.1855/6: RNCC: 5 | RNVC: 2
291/8: RNCC: 5 | RNVC: 9
WE-ES-KO 291-8: RNCC: 5 | RNVC: 9

13 Jun 1995

5340-12-185-0019
Angle Bracket

121850019
F01-240130-05-0: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-12-184-1258
Swivel Caster

121841258
101ULKSTARUSK0100-40KUG: RNCC: 3 | RNVC: 2
101ULKSTARASK0: RNCC: 5 | RNVC: 9

26 Jun 1980

5340-12-307-0495
Electrical-Mechanical Equipment Post

123070495
12524: RNCC: 3 | RNVC: 2

2 May 1986

5340-12-311-1201
Strap Fastener Loop

123111201
AGS50710: RNCC: 3 | RNVC: 2

28 Jul 1987

5340-12-327-4691
Nonmetallic Bumper

123274691
702-143215-902-0: RNCC: 2 | RNVC: 2
702-143215-902-0: RNCC: 3 | RNVC: 2

27 Jan 1992

5340-12-393-8523
Headless Straight Rod

123938523
131W180045.000.0: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-12-341-0773
Retaining Bail

123410773
578008.4.010.4: RNCC: 3 | RNVC: 9
578008.4.010.4: RNCC: 5 | RNVC: 9

25 Jul 1996

5340-12-180-6774
Webbing Strap

121806774
RM08524: RNCC: 3 | RNVC: 2
RM08524: RNCC: 5 | RNVC: 9

26 Sep 1979

5340-12-360-0766
Mounting Bracket

123600766
9418200514: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-12-365-9958
Mounting Bracket

123659958
9425424140: RNCC: 3 | RNVC: 2

24 Feb 2005

5340-12-358-9445
Multiple Angle Bracket

123589445
8370131362: RNCC: 3 | RNVC: 2
83701 31362: RNCC: 5 | RNVC: 9

2 Dec 2002

5340-12-316-6912
Mounting Bracket

123166912
51-53223: RNCC: 3 | RNVC: 2

2 Feb 1989

5340-12-389-6743
Loop Clamp

123896743
DIN3016-1-D1-16X15-W3-EPDM: RNCC: 2 | RNVC: 2
RSGU1.16/15-W3: RNCC: 3 | RNVC: 2

9 Aug 2012

5340-12-332-9351
Butt Hinge

123329351
DIN7955-C25-ST-ZN: RNCC: 2 | RNVC: 2
703 025 Z: RNCC: 3 | RNVC: 2
703025Z: RNCC: 5 | RNVC: 2
C25DIN7955-ST-VERZINKT: RNCC: 5 | RNVC: 2

7 Oct 1993

5340-12-135-6055
Support Hook

121356055
03056: RNCC: 3 | RNVC: 2
2031961: RNCC: 5 | RNVC: 2
TL5130-0096: RNCC: 5 | RNVC: 2
203 196 1: RNCC: 5 | RNVC: 9
0S6: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-325-0801
Mending Plate

123250801
702-753010-905-0: RNCC: 3 | RNVC: 2

30 Apr 1991

5340-12-347-3291
Webbing Strap

123473291
2300421-181440.000: RNCC: 2 | RNVC: 2
9915765: RNCC: 3 | RNVC: 2
2300421-181440.000: RNCC: 5 | RNVC: 2
2300421-181440.000: RNCC: 5 | RNVC: 9
9915765: RNCC: 5 | RNVC: 9

27 Nov 1998

5340-12-163-9921
Resilient Mount

121639921
331206461: RNCC: 3 | RNVC: 2
331206461: RNCC: 3 | RNVC: 2
06461: RNCC: 5 | RNVC: 2
331206461: RNCC: 5 | RNVC: 2
VG95365-A2-NR65ST-M10DURCHGEHEND: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-189-0864
Retaining Strap

121890864
195014: RNCC: 3 | RNVC: 2
E3660-0000-0004: RNCC: 5 | RNVC: 2

26 Aug 1981

5340-12-123-3115
Butt Hinge

121233115
5565-13-65.04: RNCC: 3 | RNVC: 2
5565-13-65-04: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-393-8324
Electronic Equipment Hardware Kit

123938324
11.48943-0678: RNCC: 3 | RNVC: 2
11.48943-0678: RNCC: 5 | RNVC: 2

15 Oct 2013

5340-12-198-3861
Clamping Catch

121983861
459.925: RNCC: 3 | RNVC: 2
1016-1600-0202: RNCC: 5 | RNVC: 2

24 Jan 1984

5340-12-163-9591
Nonmetallic Bumper

121639591
VG95092A5X2,5X18X7,5PVC-WEICH: RNCC: 2 | RNVC: 2
837-36.26.9.PVC: RNCC: 3 | RNVC: 2
36-26-9: RNCC: 5 | RNVC: 2
ZB9: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-334-3681
Mounting Plate

123343681
1680300200: RNCC: 3 | RNVC: 2

2 May 1994

5340-12-309-1735
Angle Bracket

123091735
4025010172: RNCC: 3 | RNVC: 2

19 Dec 1986

5340-12-300-5194
Loop Clamp

123005194
0188S: RNCC: 3 | RNVC: 2
188S: RNCC: 5 | RNVC: 2
ZT0188S: RNCC: 5 | RNVC: 2
ZT188S: RNCC: 5 | RNVC: 2
5L.3821.004.42: RNCC: 5 | RNVC: 2
5L.3821.004.42: RNCC: 5 | RNVC: 2

9 Aug 1984

5340-12-339-1389
Mounting Bracket

123391389
10.41.083.00: RNCC: 3 | RNVC: 2
0008631314: RNCC: 3 | RNVC: 2
104100300: RNCC: 5 | RNVC: 9

16 Oct 1995

5340-12-335-6625
Ball Socket Seat

123356625
60925: RNCC: 3 | RNVC: 2
60925: RNCC: 5 | RNVC: 9

8 Sep 1994

5340-12-389-9870
Mounting Plate

123899870
700425000111: RNCC: 3 | RNVC: 2

20 Sep 2012

5340-12-196-3733
Handwheel

121963733
1092: RNCC: 3 | RNVC: 2

30 Jun 1983

5340-12-363-1349
Mechanical Stop

123631349
2546: RNCC: 3 | RNVC: 2

6 May 2004

5340-12-134-3139

5340-12-192-2154
Swivel Caster

121922154
NO PRIMARY REF 12-192-2154: RNCC: 3 | RNVC: 2
353: RNCC: 5 | RNVC: 9
LM-4875: RNCC: 5 | RNVC: 9

31 Mar 1982

5340-12-304-7939
Pipe Bracket

123047939
DIN87371-26: RNCC: 2 | RNVC: 2
26DIN87371: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-303-3806
Access Cover

123033806
44-21983: RNCC: 3 | RNVC: 2

19 Mar 1985

5340-12-148-3732
Resilient Mount

121483732
83203101: RNCC: 3 | RNVC: 2
420-204-B-06.04: RNCC: 3 | RNVC: 2
420-204-B-06.04: RNCC: 5 | RNVC: 2
29E2-02-04-06-04: RNCC: 5 | RNVC: 2
420-204B06-04: RNCC: 5 | RNVC: 2
420-204B0604: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-390-8938
Angle Bracket

123908938
5804038-202800.01: RNCC: 2 | RNVC: 2
5804038-202800.01: RNCC: 5 | RNVC: 2

4 Jan 2013

5340-12-188-0453
Mortise Bolt

121880453
2300109-182100.002.0: RNCC: 2 | RNVC: 2
2300109-182100.002.0: RNCC: 3 | RNVC: 2
2300109-182100.002.0: RNCC: 3 | RNVC: 2
2300109-182100.002.0: RNCC: 3 | RNVC: 2
2300109-182100-002-0: RNCC: 5 | RNVC: 2
2300109-182100-002-0: RNCC: 5 | RNVC: 2
2300109-182100-002-0: RNCC: 5 | RNVC: 9
2300109-182100.002.0: RNCC: 5 | RNVC: 9
2300109-182100.002.0: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-304-7863
Mending Plate

123047863
0224 4384: RNCC: 3 | RNVC: 2
02244384EE0148-29: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-314-0419
Angle Bracket

123140419
3934291340: RNCC: 3 | RNVC: 2
393 429 13 40: RNCC: 5 | RNVC: 2

1 Jun 1988

5340-12-302-2209
Electrical-Mechanical Equipment Post

123022209
P-856032-401: RNCC: 3 | RNVC: 2
P856032-401: RNCC: 5 | RNVC: 2

11 Dec 1984

5340-12-702-5080
Mounting Bracket

127025080
VG95211-ML-127025080: RNCC: 2 | RNVC: 2
5.51.6501.1074.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-393-9345
Quick Release Plunger

123939345
122613: RNCC: 3 | RNVC: 2
GN615.1-M6-BSN: RNCC: 5 | RNVC: 2

23 Oct 2013

5340-12-151-6290
Spring Tension Clip

121516290
25704-190000.24.0: RNCC: 2 | RNVC: 2
25704-190000.24.0: RNCC: 3 | RNVC: 2
25704-190000-24-0: RNCC: 5 | RNVC: 2
25704-190000-24-0: RNCC: 5 | RNVC: 9
25704-190000.24.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-0976
Angle Bracket

123180976
140-110100-001-0: RNCC: 3 | RNVC: 2
066931-760: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-334-7825
Mounting Plate

123347825
52.0099.100.03: RNCC: 2 | RNVC: 2
52.0099.100.03: RNCC: 3 | RNVC: 2

21 Jun 1994

5340-12-138-5655

5340-12-324-9439
Nonmetallic Bumper

123249439
42445/6200-04: RNCC: 3 | RNVC: 2

12 Apr 1991

5340-12-148-1955
Retaining Strap

121481955
81974010415: RNCC: 3 | RNVC: 2
25-000-39: RNCC: 5 | RNVC: 2
81.97401-0415: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-365-5892
Double Angle Bracket

123655892
J32320130-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-173-3557
Dust And Moisture Seal Protective Cap-Plug

121733557
SP33010: RNCC: 3 | RNVC: 2
AQ330-10: RNCC: 5 | RNVC: 2

10 Apr 1978

5340-12-343-1175
Flush Lock

123431175
401-009: RNCC: 3 | RNVC: 2

2 May 1997

5340-12-352-6320
Webbing Strap

123526320
8310-0007: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-345-1190
Rigid Caster

123451190
B 210: RNCC: 3 | RNVC: 2

2 Feb 1998

5340-12-332-4117
Mounting Plate

123324117
0851 7753.095: RNCC: 3 | RNVC: 2
0851 7564.112: RNCC: 5 | RNVC: 2
8517753FA T.95: RNCC: 5 | RNVC: 9
8517564FA T.112: RNCC: 5 | RNVC: 9

9 Aug 1993

5340-12-349-7793
Access Cover

123497793
5.030-834: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-12-169-2037
Retaining Strap

121692037
WW311095A: RNCC: 3 | RNVC: 2
WW311095A: RNCC: 5 | RNVC: 2
WW 311 095 A: RNCC: 5 | RNVC: 2
WW311095A: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-388-2069
Angle Bracket

123882069
1030105-206200.009.0: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-12-314-8997
Rod End Connector

123148997
6112313: RNCC: 3 | RNVC: 2
6112313: RNCC: 5 | RNVC: 2

24 Aug 1988

5340-12-196-5474
Headless Straight Rod

121965474
43709454-601: RNCC: 3 | RNVC: 2

18 Jul 1983

5340-12-197-3472
Angle Bracket

121973472
4-014-11/21100.04: RNCC: 3 | RNVC: 2
4-014-11/21100.04: RNCC: 5 | RNVC: 9

13 Oct 1983

5340-12-334-6438
Spring Tension Clip

123346438
65.7787.481.01-A001: RNCC: 3 | RNVC: 2

6 Jun 1994

5340-12-176-3629
Nonmetallic Bumper

121763629
183201643: RNCC: 3 | RNVC: 2

27 Nov 1978

5340-12-360-4936
Manual Control Lever

123604936
462-630175.000: RNCC: 3 | RNVC: 2
000373-140000.00: RNCC: 5 | RNVC: 2
0937932: RNCC: 5 | RNVC: 2

26 May 2003

5340-12-362-2735
Angle Bracket

123622735
J21520074-403: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-198-7728
Catch Strike

121987728
009-083.130-004: RNCC: 2 | RNVC: 2
009-083.130-004: RNCC: 3 | RNVC: 2

24 Feb 1984

5340-12-337-6762
Mounting Bracket

123376762
393-250515.000: RNCC: 3 | RNVC: 2
393-250515.000: RNCC: 5 | RNVC: 9
9846263: RNCC: 5 | RNVC: 9

27 Mar 1995

5340-12-360-8959
Spacing Threaded Standoff

123608959
PAN5171-10-090: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-319-9901
Door Holder

123199901
05006-00: RNCC: 3 | RNVC: 2
0007300016: RNCC: 5 | RNVC: 2

24 Nov 1989

5340-12-129-2845
Padlock

121292845
DIN7465-C70R-MS-ST-6031F9: RNCC: 2 | RNVC: 2
C70RDIN7465-MS-ST-VERZINKT: RNCC: 5 | RNVC: 2
C70RDIN7465MSSTVERZINKT: RNCC: 5 | RNVC: 2
DIN7465-C70R-MS-ST-6014: RNCC: 5 | RNVC: 2
DIN7465-D3-70-LQ6014-MS-ST: RNCC: 5 | RNVC: 9
DIN7465-D3-70-LQ6031F9-MS-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-357-2793
Pad Eye

123572793
H82.006961: RNCC: 3 | RNVC: 2
8166/VSP-FARON: RNCC: 5 | RNVC: 2
82.0069.61: RNCC: 5 | RNVC: 9

29 May 2002

5340-12-327-4162
Bow Handle

123274162
30819-022: RNCC: 3 | RNVC: 2

21 Jan 1992

5340-12-308-8698
Retaining Strap

123088698
KM.S01-111100.001: RNCC: 3 | RNVC: 2

25 Nov 1986

5340-12-368-1339
Angle Bracket

123681339
5161-360000B05B: RNCC: 2 | RNVC: 2
5161-360000B05B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-356-3256
Mounting Bracket

123563256
2125-121070A02B: RNCC: 2 | RNVC: 2
2125-121070A02B: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-12-326-7836
Nonmetallic Bumper

123267836
4080-010: RNCC: 3 | RNVC: 2

24 Oct 1991

5340-12-343-1296
Metallic Bumper

123431296
2654-331910.01: RNCC: 2 | RNVC: 2
2654-331910.01: RNCC: 3 | RNVC: 2
2654-331 910.01: RNCC: 5 | RNVC: 9
2654-331910.01: RNCC: 5 | RNVC: 9
2654-331 910.01: RNCC: 5 | RNVC: 9
2654-331 910.01: RNCC: 5 | RNVC: 9

6 May 1997

5340-12-145-7181
Retaining Strap

121457181
RSGU2.10/15-3.1364T42: RNCC: 3 | RNVC: 2
RSGU1200-10-15AL: RNCC: 5 | RNVC: 2
RSGU1200.10/15-3.1364T42: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-185-9555
Webbing Strap

121859555
4900059-212070.000.0: RNCC: 2 | RNVC: 2
01803-2-SCHLAUFE-FE880-LE1130MM: RNCC: 3 | RNVC: 2
79016/SCHLAUFE-2010-880: RNCC: 3 | RNVC: 2
212070-000-0: RNCC: 3 | RNVC: 2
4900059-212070.000.0: RNCC: 5 | RNVC: 2
1287107: RNCC: 5 | RNVC: 2
4900059-212070-000-0: RNCC: 5 | RNVC: 2
4900059-212070-000-0: RNCC: 5 | RNVC: 9
4900059-212070.000.0: RNCC: 5 | RNVC: 9
DIN60060-2-50X880X1130-C1/SCHLAU: RNCC: 5 | RNVC: 9

13 Nov 1980

5340-12-158-4940
Loop Clamp

121584940
1201 9563: RNCC: 3 | RNVC: 2
12019563: RNCC: 5 | RNVC: 2
A26.617-240/2.4: RNCC: 5 | RNVC: 2
A26-617-240-2-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-4697
Butt Hinge

121994697
A-245875-027: RNCC: 3 | RNVC: 2
A245875-027: RNCC: 5 | RNVC: 2

27 Apr 1984

5340-12-312-5198
Access Hole Frame

123125198
065-043320.01: RNCC: 3 | RNVC: 2

14 Jan 1988

5340-12-158-5898
Pad Eye

121585898
2360-261100.09.0: RNCC: 2 | RNVC: 2
2360-261100.09.0: RNCC: 3 | RNVC: 2
2360-261100-09-0: RNCC: 5 | RNVC: 2
2360-261100.09.0: RNCC: 5 | RNVC: 2
2360-261100-09-0: RNCC: 5 | RNVC: 9
2360-261100.09.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-2467
Hand Crank

123162467
GN510-140-B12: RNCC: 3 | RNVC: 2

4 Jan 1989

5340-12-317-6944
Bow Handle

123176944
2500121-610000.08: RNCC: 2 | RNVC: 2
15.7105.387.05-A001: RNCC: 3 | RNVC: 2
277.2-LACKIERT RAL6031F9: RNCC: 3 | RNVC: 2
15.7105.387.05: RNCC: 5 | RNVC: 2
2500121-610000.08: RNCC: 5 | RNVC: 9

2 May 1989

5340-12-142-8532
Loop Clamp

121428532
ZWSPGU8635.6-15/12SKZ: RNCC: 3 | RNVC: 2
0009952344: RNCC: 5 | RNVC: 2
1338635000: RNCC: 5 | RNVC: 2
ZWSPGU8635-6-15-12ZY: RNCC: 5 | RNVC: 2
ZWSPGU6-15-12ZY: RNCC: 5 | RNVC: 2
ZWSPGU8635-6-15/12ZY: RNCC: 5 | RNVC: 2
ZWSPGU8635.6-15/12ZY: RNCC: 5 | RNVC: 2
103113: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-199-1166
Loop Clamp

121991166
P-295597-403: RNCC: 3 | RNVC: 2
P295597-403: RNCC: 5 | RNVC: 2

28 Mar 1984

5340-12-335-9806
Double Angle Bracket

123359806
5.004-228.0: RNCC: 3 | RNVC: 2
5.004-228: RNCC: 5 | RNVC: 9

7 Oct 1994

5340-12-183-6330
Retaining Strap

121836330
2300034-180211-02: RNCC: 2 | RNVC: 2
42018258: RNCC: 5 | RNVC: 2
42018258EE5007-59: RNCC: 5 | RNVC: 2
2300034-180211.02: RNCC: 5 | RNVC: 9
2300034-180211-02: RNCC: 5 | RNVC: 9

6 May 1980

5340-12-379-8602
Recess Handle

123798602
05932134: RNCC: 3 | RNVC: 2
05932134: RNCC: 5 | RNVC: 2
CV168921: RNCC: 5 | RNVC: 2

8 Sep 2009

5340-12-369-0789
Dust And Moisture Seal Protective Plug

123690789
7803221303AA: RNCC: 3 | RNVC: 2

19 May 2006

5340-12-377-8503
Loop Clamp

123778503
2162102: RNCC: 2 | RNVC: 2
2162102: RNCC: 3 | RNVC: 2

16 Feb 2009

5340-12-300-1899
Nonmetallic Bumper

123001899
4113250044: RNCC: 3 | RNVC: 2

12 Jul 1984

5340-12-348-6272
Lock-Release Lever

123486272
11800301: RNCC: 3 | RNVC: 2

28 Jul 1999

5340-12-301-6088
Double Angle Bracket

123016088
2300107-300000.52: RNCC: 2 | RNVC: 2
2300107-300000.52: RNCC: 3 | RNVC: 2
2300107-300000.52: RNCC: 5 | RNVC: 9
2300107-300000.52: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-301-7487
Butt Hinge

123017487
2300107-310100.18: RNCC: 2 | RNVC: 2
2300107-310100.18: RNCC: 3 | RNVC: 2
2300107-310100.18: RNCC: 5 | RNVC: 9
2300107-310100.18: RNCC: 5 | RNVC: 9
A60X1,5X610DIN7956-MS: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-12-316-2913
Rod End Clevis

123162913
6380598: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-333-3537
Multiple Angle Bracket

123333537
702-438700-901-0: RNCC: 3 | RNVC: 2

6 Dec 1993

5340-12-701-8440
Loop Clamp

127018440
VG95211-ML-127018440: RNCC: 2 | RNVC: 2
5149A-3: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-146-6711
Loop Clamp

121466711
DIN3016-G1-126X20-W1-2: RNCC: 2 | RNVC: 2
SP136/20SKZ: RNCC: 3 | RNVC: 2
DIN3016-G1-126X20-W1-2: RNCC: 3 | RNVC: 2
SP136-20X1SKN288A: RNCC: 5 | RNVC: 2
1510000136: RNCC: 5 | RNVC: 2
SP136-20SK: RNCC: 5 | RNVC: 2
VG95931-G136X20-W1: RNCC: 5 | RNVC: 9
VG95931G136X20W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-4270
Angle Bracket

123084270
P-243877-755: RNCC: 3 | RNVC: 2
P243877-755: RNCC: 5 | RNVC: 2

9 Oct 1986

5340-12-327-9001
Mounting Plate

123279001
C42080-A34-C9: RNCC: 2 | RNVC: 2
C42080-A34-C9: RNCC: 3 | RNVC: 2

18 Mar 1992

5340-12-366-4159
Dust And Moisture Seal Protective Plug

123664159
2522 4506-193: RNCC: 3 | RNVC: 2
2522 4506-193: RNCC: 5 | RNVC: 2

22 Apr 2005

5340-12-323-5754
Mounting Bracket

123235754
160-82081-02: RNCC: 3 | RNVC: 2
160-82081-02: RNCC: 5 | RNVC: 9

7 Dec 1990

5340-12-356-5091
Access Cover

123565091
J94330066-401: RNCC: 3 | RNVC: 2
7998701: RNCC: 5 | RNVC: 2

7 Mar 2002

5340-12-165-8592
Nonmetallic Bumper

121658592
25704-001160.00.0: RNCC: 2 | RNVC: 2
25704-001160.00.0: RNCC: 3 | RNVC: 2
25704-001160.00.0: RNCC: 3 | RNVC: 2
25704-001160-00-0: RNCC: 5 | RNVC: 2
25704-001160-00-0: RNCC: 5 | RNVC: 9
25704-001160.00.0: RNCC: 5 | RNVC: 9
25704-001160-00-0: RNCC: 5 | RNVC: 9
25704-001160.00.0: RNCC: 5 | RNVC: 9

3 Jul 1976

5340-12-380-3776
Angle Bracket

123803776
5220780741: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-12-374-7517
Dust And Moisture Seal Protective Cap

123747517
CBD45046P01: RNCC: 3 | RNVC: 2

14 Mar 2008

5340-12-163-9476
Nonmetallic Bumper

121639476
330822097: RNCC: 3 | RNVC: 2
330822097: RNCC: 3 | RNVC: 2
22097: RNCC: 5 | RNVC: 2
330822097: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-164-0837
Retaining Strap

121640837
100356-200000.38: RNCC: 2 | RNVC: 2
100356-200000.38: RNCC: 3 | RNVC: 2
100356-200000.38: RNCC: 3 | RNVC: 2
100356-200000-38: RNCC: 5 | RNVC: 2
100356-200000-38: RNCC: 5 | RNVC: 9
100356-200000.38: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-2506
Multiple Angle Bracket

123562506
6600218-3502: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-328-9696
Nut And Bolt Locking Plate

123289696
2653-120130.02: RNCC: 2 | RNVC: 2
2653-120130.02: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-702-1183
Angle Bracket

127021183
VG95211-ML-127021183: RNCC: 2 | RNVC: 2
30.5811.10: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-186-3372
Manual Control Handle

121863372
274-02-01-02-34: RNCC: 3 | RNVC: 2
274-02-01-02-34: RNCC: 5 | RNVC: 9

17 Dec 1980

5340-12-352-4966
Mounting Bracket

123524966
521910-970111.000.0: RNCC: 2 | RNVC: 2
521910-970111.000.0: RNCC: 3 | RNVC: 2
1271401: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-386-1445
Extension Drawer Slide

123861445
2500261-850310.001.0: RNCC: 2 | RNVC: 2
2500261-850310.001.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-344-4024
Retaining Strap

123444024
2300436-240000.002.0: RNCC: 3 | RNVC: 2

23 Oct 1997

5340-12-349-6607
Ball Socket Seat

123496607
1068000008: RNCC: 3 | RNVC: 2
63 12 2 306 490: RNCC: 5 | RNVC: 2
8SXN68R: RNCC: 5 | RNVC: 2

15 Dec 1999

5340-12-385-9754
Access Hole Frame

123859754
2500262-390211.000.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-370-5168
Spacing Threaded Standoff

123705168
5.13.701: RNCC: 3 | RNVC: 2

16 Nov 2006

5340-12-342-9215
Double Angle Bracket

123429215
CF 842 565 A: RNCC: 2 | RNVC: 2
CF 842 565 A: RNCC: 3 | RNVC: 2

16 Apr 1997

5340-12-329-0577
Casement Fastener

123290577
1.350.132.9: RNCC: 3 | RNVC: 2

15 Jul 1992

5340-12-355-4358
Corner Brace

123554358
5496.001.3: RNCC: 3 | RNVC: 2

15 Nov 2001

5340-12-387-8339
Mounting Bracket

123878339
7084466: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-12-380-4756
Mounting Bracket

123804756
4256830514: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-309-6894
Rubber Bumper

123096894
46531451867: RNCC: 3 | RNVC: 9

16 Feb 1987

5340-12-375-7688
Mounting Plate

123757688
535-940100.00.0: RNCC: 2 | RNVC: 2
535-940100.00.0: RNCC: 3 | RNVC: 2
1541227: RNCC: 5 | RNVC: 2

3 Jul 2008

5340-12-196-6933
Detent Plunger

121966933
3.31.0329.0: RNCC: 3 | RNVC: 2
3.31.329.0: RNCC: 5 | RNVC: 2

2 Aug 1983

5340-12-322-0086
Mending Plate

123220086
2782-363000.004.0: RNCC: 2 | RNVC: 2
2782-363000.004.0: RNCC: 3 | RNVC: 2

17 Jul 1990

5340-12-321-5162
Bow Handle

123215162
2782-363010.000.0: RNCC: 2 | RNVC: 2
2782-363010.000.0: RNCC: 3 | RNVC: 2

28 May 1990

5340-12-334-0121
Mending Plate

123340121
4604280040: RNCC: 3 | RNVC: 2
S 721 1 31 117 1: RNCC: 3 | RNVC: 9
7013-95: RNCC: 5 | RNVC: 2
ZR04280040: RNCC: 5 | RNVC: 2

8 Mar 1994

5340-12-198-0985
Friction Catch

121980985
9114.994.4: RNCC: 3 | RNVC: 2
9114.998.4: RNCC: 5 | RNVC: 9

20 Dec 1983

5340-12-191-4195
Bow Handle

121914195
264.1: RNCC: 3 | RNVC: 2
264-1: RNCC: 5 | RNVC: 2

2 Feb 1982

5340-12-197-0744
Lock-Release Lever

121970744
6132.991.4: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-12-195-8939
Extension Drawer Slide

121958939
5.043.053.9: RNCC: 3 | RNVC: 2

28 Apr 1983

5340-12-321-8265
Metal Runner

123218265
9000 8167: RNCC: 3 | RNVC: 2

29 Jun 1990

5340-12-174-0424
An Schloszgarnitur

5340-12-382-1825
Access Cover

123821825
MRL 52 / 2890437-1: RNCC: 3 | RNVC: 2

19 May 2010

5340-12-701-1770
Angle Bracket

127011770
VG95211-ML-127011770: RNCC: 2 | RNVC: 2
5.12.0246.0260.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-703-2073
Mounting Bracket

127032073
VG95211-ML-127032073: RNCC: 2 | RNVC: 2
5.12.5850.8270.03: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-343-4389
Butt Hinge Leaf

123434389
B25X3X448HAN16515-3-3214-7: RNCC: 3 | RNVC: 2
B25X3X448HAN16515-3.3214.7: RNCC: 5 | RNVC: 2
B25X3X448HAN16515-W3355.7: RNCC: 5 | RNVC: 2

20 Jun 1997

5340-12-701-4339
Loop Clamp

127014339
VG95211-ML-127014339: RNCC: 2 | RNVC: 2
5.12.5313.1000.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-3335
Angle Bracket

123613335
51081400043: RNCC: 3 | RNVC: 2
51.08140-0043: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-363-1920
Nonmetallic Bumper

123631920
J0423752H525-001A0-004: RNCC: 3 | RNVC: 2

12 May 2004

5340-12-368-4662
Mounting Bracket

123684662
J21220149-005: RNCC: 3 | RNVC: 2

14 Mar 2006

5340-12-352-2166
Angle Bracket

123522166
J32120008-001: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-310-9703
Dust And Moisture Seal Protective Plug

123109703
025-8636-046: RNCC: 3 | RNVC: 2

14 Jul 1987

5340-12-356-3275
Retaining Strap

123563275
2125-113100.32B: RNCC: 2 | RNVC: 2
2125-113100.32B: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-12-328-9081
Nonmetallic Bumper

123289081
2653-060000.12: RNCC: 2 | RNVC: 2
2653-060000.12: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-317-3696
Mounting Bracket

123173696
00166-027-010: RNCC: 3 | RNVC: 2
166-27-10: RNCC: 5 | RNVC: 9

3 Apr 1989

5340-12-179-8375
Electrical-Mechanical Equipment Post

121798375
2029128004: RNCC: 3 | RNVC: 2
5801507-0210-004: RNCC: 5 | RNVC: 2
5801507-0210-004: RNCC: 5 | RNVC: 9
20291 28004: RNCC: 5 | RNVC: 9

3 Aug 1979

5340-12-311-7183
Electrical-Mechanical Equipment Post

123117183
VG95148B13XM6X40-ST: RNCC: 2 | RNVC: 2
VG95148B13XM6X40-ST: RNCC: 3 | RNVC: 2

9 Oct 1987

5340-12-365-1472
Mounting Bracket

123651472
536077-0630.000: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-152-4950
Mending Plate

121524950
6690006-250-07: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-383-5340
Access Cover

123835340
8262-0056: RNCC: 3 | RNVC: 2

4 Nov 2010

5340-12-354-5152
Section Block Clamp

123545152
J29120345-001: RNCC: 3 | RNVC: 2

24 Jul 2001

5340-12-360-7677
Double Angle Bracket

123607677
5803885-300100.00: RNCC: 2 | RNVC: 2
7802957310: RNCC: 3 | RNVC: 2
5803885-300100.00: RNCC: 5 | RNVC: 2

8 Jul 2003

5340-12-333-8417
Lock-Release Lever

123338417
4601.00200.330: RNCC: 3 | RNVC: 2
4601-00200-330: RNCC: 5 | RNVC: 2

16 Feb 1994

5340-12-365-5823
Double Angle Bracket

123655823
J28130077-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-319-8091
Mounting Bracket

123198091
335907-1103.000: RNCC: 2 | RNVC: 2
335907-1103.000: RNCC: 3 | RNVC: 2
335907-1103.000: RNCC: 5 | RNVC: 9

7 Nov 1989

5340-12-154-9202
Retaining Strap

121549202
8403412: RNCC: 3 | RNVC: 2
0047-311: RNCC: 5 | RNVC: 2
0047311: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-179-7701
Loop Clamp

121797701
DIN3016-2-G1-207X25X1,25-W1-2: RNCC: 2 | RNVC: 2
SP207/25X1,25SK-W1: RNCC: 3 | RNVC: 2
DIN3016-G1-207X25X1,25-W1-2: RNCC: 3 | RNVC: 2
SP207-25X1-25SK: RNCC: 5 | RNVC: 2
900288207100: RNCC: 5 | RNVC: 2
SP207-25X1-25SKN288A: RNCC: 5 | RNVC: 2
VG95931-G207X25X1,25-W1: RNCC: 5 | RNVC: 9
SP207/25X1,25SK: RNCC: 5 | RNVC: 9
VG95931G207X25W1: RNCC: 5 | RNVC: 9
DIN3016-G1-207X25X1,25-W1-2: RNCC: 5 | RNVC: 9

30 Jul 1979

5340-12-193-6655
Resilient Mount

121936655
DIN95363-D20X15-NR55ST: RNCC: 2 | RNVC: 2
81160-20X15-M6X20.NR55.ST: RNCC: 5 | RNVC: 2
AK58302: RNCC: 5 | RNVC: 2
1.20.15.1A.55NR/ST: RNCC: 5 | RNVC: 2
VG95363-D20X15-NR55ST: RNCC: 5 | RNVC: 9

18 Aug 1982

5340-12-197-7671
Angle Bracket

121977671
A-145401-068: RNCC: 3 | RNVC: 2
A145401-068: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-332-9885
Catch Strike

123329885
5900046-1270.04: RNCC: 2 | RNVC: 2
21-1270-04: RNCC: 3 | RNVC: 2
21-1270.04: RNCC: 3 | RNVC: 2
21-1270-04: RNCC: 5 | RNVC: 9
21-1270.04: RNCC: 5 | RNVC: 9

19 Oct 1993

5340-12-378-2969
Spring Tension Clip

123782969
81626300040: RNCC: 3 | RNVC: 2
81.62630-0040: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-12-177-7907
Mending Plate

121777907
5801314-1150.000: RNCC: 2 | RNVC: 2
5801314-1150.000: RNCC: 3 | RNVC: 2
5801314-1150.000: RNCC: 3 | RNVC: 2
3870524002: RNCC: 5 | RNVC: 2
5801314-1150.000: RNCC: 5 | RNVC: 2
5801314-1150.000: RNCC: 5 | RNVC: 9
5801314-1150.000: RNCC: 5 | RNVC: 9
38705 24002: RNCC: 5 | RNVC: 9
5801314-1150-000: RNCC: 5 | RNVC: 9

21 Feb 1979

5340-12-172-6118
Electrical-Mechanical Equipment Post

121726118
VG95148A5XM3X11-AL-EQ-E1-SW: RNCC: 2 | RNVC: 2
210-03-02-014: RNCC: 3 | RNVC: 2
VG95148A5XM3X11-AL-EQ-E1-SW: RNCC: 3 | RNVC: 2

31 Jan 1978

5340-12-337-9416
Handle Grip

123379416
C195-A101-B104: RNCC: 3 | RNVC: 2
C195A101B104: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-149-7711
Clamping Catch

121497711
5800600-0961.000: RNCC: 2 | RNVC: 2
7409590011: RNCC: 5 | RNVC: 2
ST5800600-0961.000: RNCC: 5 | RNVC: 9
5800600-0961-000: RNCC: 5 | RNVC: 9
ST5800600-0961-000: RNCC: 5 | RNVC: 9
74095 90011: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-1505
Resilient Mount

121961505
HB44-BBM-10: RNCC: 3 | RNVC: 2
HB44-BBM-10: RNCC: 5 | RNVC: 9
HB44BBM10: RNCC: 5 | RNVC: 9

7 Jun 1983

5340-12-378-3006
Metal Grille

123783006
8320-0072: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-12-353-8224
Loop Clamp

123538224
JN0205-120: RNCC: 3 | RNVC: 2

14 May 2001

5340-12-196-9983
Webbing Strap

121969983
4900059-222034.000.0: RNCC: 2 | RNVC: 2
01803-2-SCHLAUFE-FE370MM-LE570MM: RNCC: 3 | RNVC: 2
4900059-222034.000.0: RNCC: 3 | RNVC: 2
221-00-355-3: RNCC: 3 | RNVC: 2
79016/SCHLAUFE-940-370: RNCC: 3 | RNVC: 2
4900059-222034.000.0: RNCC: 3 | RNVC: 2
4900059-222034.000.0: RNCC: 3 | RNVC: 2
4900059-222034-000-0: RNCC: 5 | RNVC: 2
221-00-355-3: RNCC: 5 | RNVC: 9
DIN60060-2-50X370X570-C1/SCHLAUF: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-335-1055
Handle Grip

123351055
2500255-194600.000.0: RNCC: 2 | RNVC: 2
2500255-194600.000.0: RNCC: 3 | RNVC: 2
2500255-194600-000-0: RNCC: 5 | RNVC: 2

25 Jul 1994

5340-12-171-7013
Dust And Moisture Seal Protective Cap

121717013
250/26,9: RNCC: 3 | RNVC: 2
GPN250/26,9: RNCC: 5 | RNVC: 2
GPN250-26-9: RNCC: 5 | RNVC: 9
250-26-9: RNCC: 5 | RNVC: 9
250026900: RNCC: 5 | RNVC: 9
26-9GPN250: RNCC: 5 | RNVC: 9

7 Nov 1977

5340-12-146-4284
Expansion Plug

121464284
116-001-182: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-309-2204
Loop Clamp

123092204
DIN3016-2-G1-97X20-W1-2: RNCC: 2 | RNVC: 2
SP97/20SKZ: RNCC: 3 | RNVC: 2
DIN3016-G1-97X20-W1-2: RNCC: 3 | RNVC: 2
12151758: RNCC: 5 | RNVC: 2
1510000097: RNCC: 5 | RNVC: 2
DIN3016-G1-97X20-W1-2: RNCC: 5 | RNVC: 9
01510000097: RNCC: 5 | RNVC: 9
6.0402.20.3.0097: RNCC: 5 | RNVC: 9
VG95931-G97X20-W1: RNCC: 5 | RNVC: 9

23 Dec 1986

5340-12-167-0801
Manual Control Handle

121670801
560949: RNCC: 3 | RNVC: 2
3473-0032-560949: RNCC: 5 | RNVC: 2
560949: RNCC: 5 | RNVC: 2
81.3-32.1781.45: RNCC: 5 | RNVC: 2
81-3-32-1781-45: RNCC: 5 | RNVC: 9

17 Nov 1976

5340-12-389-4435
Clamping Catch

123894435
6004-U37-KA: RNCC: 3 | RNVC: 2

6 Jul 2012

5340-12-170-9483
Webbing Strap

121709483
5800044-1013.00: RNCC: 2 | RNVC: 2
5800044-1013.00: RNCC: 3 | RNVC: 2
5800044-1013.00: RNCC: 3 | RNVC: 2
5800044-1013.00: RNCC: 5 | RNVC: 2
5800044-1013-00: RNCC: 5 | RNVC: 2
5800044-1013.00: RNCC: 5 | RNVC: 9
5800044-1013-00: RNCC: 5 | RNVC: 9
000-D9-20X2,0X450-PE-RAL6031: RNCC: 6 | RNVC: 9

24 Aug 1977

5340-12-322-4302
Access Cover

123224302
64414780: RNCC: 3 | RNVC: 2
421.936-4: RNCC: 5 | RNVC: 2
4414/780: RNCC: 5 | RNVC: 9

21 Aug 1990

5340-12-392-3616
Bumper

123923616
I011097: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-131-5579
Turnbuckle

121315579
DIN82004-C4-VERZINKT: RNCC: 2 | RNVC: 2
DIN82004-C4-ZN: RNCC: 3 | RNVC: 2
6510033V: RNCC: 5 | RNVC: 2
C4DIN82004VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-197-5268
Loop Clamp

121975268
23110-3700.29: RNCC: 2 | RNVC: 2
23110-3700.29: RNCC: 3 | RNVC: 2
23110-3700-29: RNCC: 5 | RNVC: 9
23110-3700.29: RNCC: 5 | RNVC: 9
23110-3700.29: RNCC: 5 | RNVC: 9
23110-3700-29: RNCC: 5 | RNVC: 9

28 Oct 1983

5340-12-308-2955
Spring Tension Clip

123082955
00584-10100-10-000: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-309-7817
Access Door

123097817
2300121-981111.000.0: RNCC: 2 | RNVC: 2
2300121-981111.000.0: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-380-3501
Electronic Equipment Hardware Kit

123803501
FIXIERUNG RACK TYP 2: RNCC: 3 | RNVC: 2

21 Oct 2009

5340-12-333-5914
Retaining Strap

123335914
4210347A03: RNCC: 3 | RNVC: 2

11 Jan 1994

5340-12-184-7736
Mounting Plate

121847736
211260833: RNCC: 3 | RNVC: 2

16 Aug 1980

5340-12-342-4126
Dust And Moisture Seal Protective Cap

123424126
4918 V: RNCC: 3 | RNVC: 2
4918V(4): RNCC: 5 | RNVC: 2

5 Feb 1997

5340-12-307-0875
Nonmetallic Bumper

123070875
12899-9: RNCC: 3 | RNVC: 2

7 May 1986

5340-12-703-2110
Loop Clamp

127032110
VG95211-ML-127032110: RNCC: 2 | RNVC: 2
5160A-8-2: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-197-9330
Loop Clamp

121979330
DIN3016-1-A1-14X15-W1-2: RNCC: 2 | RNVC: 2
RS1.14/15: RNCC: 3 | RNVC: 2
DIN3016-A1-14X15-W1-2: RNCC: 3 | RNVC: 2
04110015014: RNCC: 5 | RNVC: 2
RS1100.14/15: RNCC: 5 | RNVC: 2
8791312008: RNCC: 5 | RNVC: 9
DIN3016-A1-14X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-A14X15-W1: RNCC: 5 | RNVC: 9

2 Dec 1983

5340-12-311-2232
Loop Clamp

123112232
DIN3015-LB-K-2R-16-PA6-W1: RNCC: 2 | RNVC: 2
HRL2B16PA STMBL: RNCC: 3 | RNVC: 2
RANE2-216: RNCC: 3 | RNVC: 2
SP216PA-IS: RNCC: 3 | RNVC: 2
RANE2-216: RNCC: 5 | RNVC: 2
DIN3015-LB2R-16PA-W1-K: RNCC: 5 | RNVC: 2
DIN3015-LB-K-2R-16-PA-W1: RNCC: 5 | RNVC: 2
SP216PA-IS: RNCC: 5 | RNVC: 2

6 Aug 1987

5340-12-701-4162
Mounting Bracket

127014162
VG95211-ML-127014162: RNCC: 2 | RNVC: 2
5.12.5311.8440.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-317-4243
Mounting Bracket

123174243
P-145502-055: RNCC: 3 | RNVC: 2
P145502-055: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-312-5079
Double Angle Bracket

123125079
P-085017-017: RNCC: 3 | RNVC: 2
P085017-017: RNCC: 5 | RNVC: 2

13 Jan 1988

5340-12-195-8935
Flush Lock

121958935
322-15: RNCC: 3 | RNVC: 2

28 Apr 1983

5340-12-301-1298
Nut And Bolt Locking Plate

123011298
P-230129-213: RNCC: 3 | RNVC: 2
P230129-213: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-320-4000
Angle Bracket

123204000
P-296827-007: RNCC: 3 | RNVC: 2
P296827-007: RNCC: 5 | RNVC: 2

11 Jan 1990

5340-12-300-4894
Metal Runner

123004894
272.1566.1-02: RNCC: 3 | RNVC: 2
272.1566.1-02: RNCC: 5 | RNVC: 9

7 Aug 1984

5340-12-310-1761
Butt Hinge

123101761
4-162022: RNCC: 3 | RNVC: 2
631374: RNCC: 3 | RNVC: 2
329078: RNCC: 5 | RNVC: 2

14 Apr 1987

5340-12-186-9615
Electrical-Mechanical Equipment Post

121869615
5802206-150000-002: RNCC: 2 | RNVC: 2
535.7093: RNCC: 3 | RNVC: 2
5357093: RNCC: 5 | RNVC: 2

23 Feb 1981

5340-12-174-7654
Dust And Moisture Seal Protective Cap-Plug

121747654
610U1: RNCC: 3 | RNVC: 2
GPN610U1: RNCC: 5 | RNVC: 2
9789400010: RNCC: 5 | RNVC: 2
610000100: RNCC: 5 | RNVC: 9
GPN610,U1: RNCC: 5 | RNVC: 9
U1: RNCC: 5 | RNVC: 9
U1GPN610: RNCC: 5 | RNVC: 9

1 Aug 1978

5340-12-361-5703
Webbing Strap

123615703
1508160: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-12-323-8700
Mounting Bracket

123238700
144703603: RNCC: 3 | RNVC: 2

2 Jan 1991

5340-12-373-5730
Dust And Moisture Seal Protective Plug

123735730
735084040000: RNCC: 3 | RNVC: 2
40MTN5084: RNCC: 5 | RNVC: 2

16 Nov 2007

5340-12-353-1904
Support Hook

123531904
AFG0702107: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-12-302-6825
Detent Plunger

123026825
11.009.203-4: RNCC: 3 | RNVC: 2
11-009-203-4: RNCC: 5 | RNVC: 2

22 Jan 1985

5340-12-188-5276
Retaining Strap

121885276
DIN1597-36-1.4301: RNCC: 2 | RNVC: 2
DIN1597-36-1.4301: RNCC: 3 | RNVC: 2
DIN1597-36-1.4301: RNCC: 3 | RNVC: 2
36DIN1597A2: RNCC: 5 | RNVC: 2
DIN1597-36-1.4301: RNCC: 5 | RNVC: 2

15 Jul 1981

5340-12-366-3963
Zugangsklapp Rolle

123663963
4000001-196416.034: RNCC: 3 | RNVC: 2

20 Apr 2005

5340-12-344-0102
Nonmetallic Bumper

123440102
DIN95364-C50X45-M10-NR40ST: RNCC: 2 | RNVC: 2
DIN95364-C50X45-NR40ST: RNCC: 2 | RNVC: 2
540046-M10.NR40.ST: RNCC: 5 | RNVC: 2
N4909: RNCC: 5 | RNVC: 2

28 Aug 1997

5340-12-330-9474
Mounting Plate

123309474
702-752000-951-0: RNCC: 3 | RNVC: 2

2 Mar 1993

5340-12-362-0799
Mounting Bracket

123620799
2500261-970131.001.0: RNCC: 2 | RNVC: 2
2500261-970131.001.0: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-356-4589
Nonmetallic Bumper

123564589
0.0.416.33: RNCC: 3 | RNVC: 2

1 Mar 2002

5340-12-304-0681
Dashpot

123040681
421-115010.00.8: RNCC: 3 | RNVC: 2
421-115010-00-8: RNCC: 5 | RNVC: 2

7 Jun 1985

5340-12-146-9028
Spring Tension Clip

121469028
2360-189340.01.0: RNCC: 2 | RNVC: 2
2360-189340.01.0: RNCC: 3 | RNVC: 2
2360-189340-01-0: RNCC: 5 | RNVC: 2
2360-189340-01-0: RNCC: 5 | RNVC: 9
2360-189340.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-9337
Bow Handle

123599337
2500261-180230.000.0: RNCC: 2 | RNVC: 2
2500261-180230.000.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-318-0984
Double Angle Bracket

123180984
140-132420-000-0: RNCC: 3 | RNVC: 2
66751-625: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-321-2513
Mounting Bracket

123212513
2300269-973711.000.0: RNCC: 2 | RNVC: 2
2300269-973711.000.0: RNCC: 3 | RNVC: 2
790-45.15.920-25: RNCC: 5 | RNVC: 2

24 Apr 1990

5340-12-702-5296
Mounting Bracket

127025296
VG95211-ML-127025296: RNCC: 2 | RNVC: 2
5.51.7020.0320.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6187
Loop Clamp

127016187
VG95211-ML-127016187: RNCC: 2 | RNVC: 2
5.12.7011.0121.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-0409
Dust And Moisture Seal Protective Cap

121960409
5801995-190310.04.0: RNCC: 2 | RNVC: 2
5801995-190310.04.0: RNCC: 5 | RNVC: 2
5801995-190310.04.0: RNCC: 5 | RNVC: 9

24 May 1983

5340-12-370-7570
Access Cover

123707570
492-190400.001: RNCC: 3 | RNVC: 2

18 Dec 2006

5340-12-332-4816
Mounting Bracket

123324816
1361235-12100-02: RNCC: 3 | RNVC: 2

16 Aug 1993

5340-12-351-6783
Angle Bracket

123516783
606-10250.03: RNCC: 3 | RNVC: 2
606-10250.03: RNCC: 5 | RNVC: 9

15 Aug 2000

5340-12-194-5353
Turnbuckle

121945353
4200078-10300: RNCC: 2 | RNVC: 2
87.12.00000.0036.0: RNCC: 3 | RNVC: 2
TG6080-10300: RNCC: 3 | RNVC: 2
4200078-10300: RNCC: 5 | RNVC: 2
4200078-10300: RNCC: 5 | RNVC: 2
6080-10300: RNCC: 5 | RNVC: 2
4200078-10300: RNCC: 5 | RNVC: 9
4200078-10300: RNCC: 5 | RNVC: 9

15 Nov 1982

5340-12-373-7332
Spring Loaded Cylinder Fastener

123737332
5.503-006.0: RNCC: 3 | RNVC: 2
5.503-006: RNCC: 5 | RNVC: 9

3 Dec 2007

5340-12-361-0341
Angle Bracket

123610341
J92220311-003: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-386-7518
Block Clamp

123867518
5801394631: RNCC: 3 | RNVC: 2
CV192366A: RNCC: 5 | RNVC: 2
5801394631: RNCC: 5 | RNVC: 2

28 Sep 2011

5340-12-307-3453
Butt Hinge

123073453
4745597: RNCC: 3 | RNVC: 2

6 Jun 1986

5340-12-344-9875
Manual Control Handle

123449875
7647 015: RNCC: 3 | RNVC: 2
7647015: RNCC: 5 | RNVC: 9

20 Jan 1998

5340-12-328-9458
Access Door

123289458
4106613588: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-388-3779
Spring Tension Clip

123883779
000000006963: RNCC: 3 | RNVC: 2
000000006963: RNCC: 5 | RNVC: 2

15 Mar 2012

5340-12-317-2346
Mounting Bracket

123172346
3523230340: RNCC: 3 | RNVC: 2

20 Mar 1989

5340-12-187-5717
Retaining Strap

121875717
5809952668: RNCC: 3 | RNVC: 2

15 Apr 1981

5340-12-300-3136
Double Angle Bracket

123003136
3098171563: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-327-5210
Dust And Moisture Seal Protective Plug

123275210
11227917300: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-12-354-8192
Retaining Bail

123548192
T80090620: RNCC: 3 | RNVC: 2
(241)A4249T80090620: RNCC: 8 | RNVC: 2
T80090620: RNCC: 8 | RNVC: 2

28 Aug 2001

5340-12-194-0257
Flush Lock

121940257
251829231: RNCC: 3 | RNVC: 2

23 Sep 1982

5340-12-366-6070
Spring Tension Clip

123666070
4618901232: RNCC: 3 | RNVC: 2

12 May 2005

5340-12-347-5533
Retaining Strap

123475533
55.2530.101.16: RNCC: 3 | RNVC: 2

6 Jan 1999

5340-12-362-1397
Retaining Band

123621397
11194149: RNCC: 3 | RNVC: 2
MBT14H: RNCC: 5 | RNVC: 2
255-2676: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-12-349-8609
Angle Bracket

123498609
T290M2075101: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-12-303-6058
Access Cover

123036058
52.0256.000.02: RNCC: 3 | RNVC: 2

12 Apr 1985

5340-12-339-0703
Sliding Stay

123390703
604 205: RNCC: 3 | RNVC: 2

6 Oct 1995

5340-12-325-4055
Resilient Mount

123254055
5115N3-HDS: RNCC: 3 | RNVC: 2
5115 N3 HDS: RNCC: 3 | RNVC: 2
5115 N3 HDS: RNCC: 5 | RNVC: 9

4 Jun 1991

5340-12-312-7268
Double Angle Bracket

123127268
141373: RNCC: 3 | RNVC: 2
0008100106: RNCC: 3 | RNVC: 2
000 810 01 06: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-323-4688
Plain Solid Disk

123234688
8400919: RNCC: 3 | RNVC: 2

28 Nov 1990

5340-12-334-3910
Mounting Plate

123343910
1680300400: RNCC: 3 | RNVC: 2
16803004: RNCC: 5 | RNVC: 2

3 May 1994

5340-12-393-5060
Block Clamp

123935060
160-72094: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-164-5694

5340-12-337-4606
Clamping Catch

123374606
EM1397-01: RNCC: 3 | RNVC: 2
1032319P00: RNCC: 5 | RNVC: 2

7 Mar 1995

5340-12-302-6737
Mending Plate

123026737
20-5220-154: RNCC: 3 | RNVC: 2

22 Jan 1985

5340-12-149-3861
Retaining Band

121493861
25704-192060.00.0: RNCC: 2 | RNVC: 2
25704-192060.00.0: RNCC: 3 | RNVC: 2
25704-192060-00-0: RNCC: 5 | RNVC: 2
25704-192060-00-0: RNCC: 5 | RNVC: 9
25704-192060.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-0261
Sealing Plug Assembly

121880261
P-896663-405: RNCC: 3 | RNVC: 2
P896663-405: RNCC: 5 | RNVC: 2
MAGERD 8013: RNCC: 5 | RNVC: 9

27 May 1981

5340-12-314-3657
Rim Lock

123143657
N61.7.10/11: RNCC: 3 | RNVC: 2
KL/RL/08: RNCC: 5 | RNVC: 2
B61.7.10/11: RNCC: 5 | RNVC: 2

30 Jun 1988

5340-12-701-7020
Mounting Plate

127017020
VG95211-ML-127017020: RNCC: 2 | RNVC: 2
5.12.7240.1120.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-174-7772
Retaining Strap

121747772
1201 9585: RNCC: 3 | RNVC: 2
12019585: RNCC: 5 | RNVC: 2
A26.656-022/5.4: RNCC: 5 | RNVC: 2
A-26-656-022-5-4: RNCC: 5 | RNVC: 9
A26-656-022-5-4: RNCC: 5 | RNVC: 9

1 Aug 1978

5340-12-306-0800
Mending Plate

123060800
P-243852-011: RNCC: 3 | RNVC: 2
P243852-011: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-199-2283
Rod End Connector

121992283
P-896256-001: RNCC: 3 | RNVC: 2
P896256-001: RNCC: 5 | RNVC: 2

5 Apr 1984

5340-12-183-4877
Angle Bracket

121834877
1000093-30000.01.0: RNCC: 2 | RNVC: 2
1000093-30000-01-0: RNCC: 3 | RNVC: 2
1000093-30000.01.0: RNCC: 3 | RNVC: 2
1000093-30000-01-0: RNCC: 5 | RNVC: 9
1000093-30000.01.0: RNCC: 5 | RNVC: 9

22 Apr 1980

5340-12-306-8594
Double Angle Bracket

123068594
5.042-141.0: RNCC: 3 | RNVC: 2
5.042-141: RNCC: 5 | RNVC: 9
5-042-141: RNCC: 5 | RNVC: 9

10 Apr 1986

5340-12-199-4699
Butt Hinge

121994699
A-245875-033: RNCC: 3 | RNVC: 2
A245875-033: RNCC: 5 | RNVC: 2

27 Apr 1984

5340-12-168-2760
Loop Clamp

121682760
DIN3016-2-G1-81X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-81X15-W1-2: RNCC: 3 | RNVC: 2
SP81/15SKZ: RNCC: 3 | RNVC: 2
1410000081: RNCC: 5 | RNVC: 2
SP81-15SKZ: RNCC: 5 | RNVC: 2
VG95931G81X15W1: RNCC: 5 | RNVC: 9
DIN3016-G1-81X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-G81X15-W1: RNCC: 5 | RNVC: 9

4 Mar 1977

5340-12-166-0046
Loop Clamp

121660046
DIN3016-1-D1-37X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-37X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.37/15: RNCC: 3 | RNVC: 2
9410015037: RNCC: 5 | RNVC: 2
RSGU1100-37-15: RNCC: 5 | RNVC: 2
RSGU1100.37/15: RNCC: 5 | RNVC: 2
DIN3016-D1-37X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-D37X15-W1: RNCC: 5 | RNVC: 9
VG95931D37X15W1: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-12-702-5694
Angle Bracket

127025694
VG95211-ML-127025694: RNCC: 2 | RNVC: 2
5.51.7701.1060.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-375-0405
Mounting Plate

123750405
SK930-193200.001.0: RNCC: 3 | RNVC: 2
7081528: RNCC: 5 | RNVC: 2

16 Apr 2008

5340-12-358-0109
Loop Clamp

123580109
DIN3016-1-D1-6X15-W5-NBR: RNCC: 2 | RNVC: 2
VG95931-D6X15-W5: RNCC: 5 | RNVC: 9
DIN3016-1-D1-6X15-W5: RNCC: 5 | RNVC: 9

2 Sep 2002

5340-12-190-0872
Spring Loaded Cylinder Fastener

121900872
CF 486 928 AU: RNCC: 3 | RNVC: 2
CF 486 928 -U: RNCC: 5 | RNVC: 2
CF 486 928 -U: RNCC: 5 | RNVC: 2
CF 486 928 AU: RNCC: 5 | RNVC: 2
CF4869280U: RNCC: 5 | RNVC: 2
CF4869280U: RNCC: 5 | RNVC: 2
CF486928AU: RNCC: 5 | RNVC: 2
CF486928AU: RNCC: 5 | RNVC: 2

9 Nov 1981

5340-12-348-6696
Dust And Moisture Seal Protective Cap

123486696
7068-21250-000-2: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-336-2844
Mounting Bracket

123362844
4620 335 087: RNCC: 3 | RNVC: 2
4620335087: RNCC: 5 | RNVC: 9

7 Nov 1994

5340-12-385-4508
Mounting Bracket

123854508
5501872640: RNCC: 3 | RNVC: 2

6 Jun 2011

5340-12-366-9794
Mounting Bracket

123669794
7785139: RNCC: 3 | RNVC: 2
0418 7366: RNCC: 5 | RNVC: 2

27 Jun 2005

5340-12-359-2969
Loop Clamp

123592969
428AL: RNCC: 3 | RNVC: 2
62640186: RNCC: 5 | RNVC: 2

21 Jan 2003

5340-12-328-9391
Angle Bracket

123289391
43714359-601: RNCC: 2 | RNVC: 2
43714359-601: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-302-0945
Mending Plate

123020945
055103390A: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-12-369-4389
Antipilferage Seal

123694389
1460508303: RNCC: 3 | RNVC: 2

4 Jul 2006

5340-12-345-4463
Mounting Bracket

123454463
54.0053.438.06: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-12-318-3875
Access Cover

123183875
14021-12151-00: RNCC: 3 | RNVC: 2
896792: RNCC: 5 | RNVC: 2

10 Jul 1989

5340-12-381-0306
Mounting Bracket

123810306
82974802007: RNCC: 3 | RNVC: 2
82998011427: RNCC: 5 | RNVC: 2
82.97480-2007: RNCC: 5 | RNVC: 2

29 Dec 2009

5340-12-177-1349
Angle Bracket

121771349
5800822-06-008: RNCC: 3 | RNVC: 2
5800822-06.008: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-185-2000
Detent Plunger

121852000
38031-250: RNCC: 2 | RNVC: 2
38031-250: RNCC: 5 | RNVC: 9

20 Sep 1980

5340-12-198-0457
Bow Handle

121980457
VG95149A100X18AL-LQ-RAL7032: RNCC: 2 | RNVC: 2
5800583-094200.029: RNCC: 3 | RNVC: 2
5800583-094200.29: RNCC: 5 | RNVC: 9
5800583-094200.29: RNCC: 5 | RNVC: 9
5800583-094200.029: RNCC: 5 | RNVC: 9

14 Dec 1983

5340-12-300-2845
Mending Plate

123002845
23114-2450.00: RNCC: 2 | RNVC: 2
23114-2450.00: RNCC: 3 | RNVC: 2
23114-2450-00: RNCC: 5 | RNVC: 9
23114-2450.00: RNCC: 5 | RNVC: 9
23114-2450-00: RNCC: 5 | RNVC: 9

20 Jul 1984

5340-12-193-5510
Plain Solid Disk

121935510
7001.013-209: RNCC: 3 | RNVC: 2
7001-013-209: RNCC: 5 | RNVC: 2
12705-11200.04: RNCC: 5 | RNVC: 9

3 Aug 1982

5340-12-194-9926
Strap Fastener Loop

121949926
2500067-101700.00: RNCC: 2 | RNVC: 2
2500067-101700.00: RNCC: 3 | RNVC: 2
2500067-101700-00: RNCC: 5 | RNVC: 9

28 Dec 1982

5340-12-305-2133
Mending Plate

123052133
2500121-610000.06: RNCC: 2 | RNVC: 2
65.7105.387.03-A001: RNCC: 3 | RNVC: 2
302175: RNCC: 5 | RNVC: 2
15.7105.387.03: RNCC: 5 | RNVC: 9
15.7105.387.03-A001: RNCC: 5 | RNVC: 9

8 Oct 1985

5340-12-383-9644
Extension Handle

123839644
S80025-00: RNCC: 3 | RNVC: 2

30 Dec 2010

5340-12-363-6228
Loop Clamp

123636228
DIN3015-ZD1R-10-12-PA-W5: RNCC: 2 | RNVC: 2

9 Jul 2004

5340-12-371-4831
Mounting Plate

123714831
23302-186700.01: RNCC: 2 | RNVC: 2
23302-186700.01: RNCC: 3 | RNVC: 2
4-2888-150: RNCC: 5 | RNVC: 2
2888150: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-12-185-1992
Retaining Strap

121851992
81436150001: RNCC: 3 | RNVC: 2
23246-160605-001-0: RNCC: 5 | RNVC: 9
23246-160605.001.0: RNCC: 5 | RNVC: 9

20 Sep 1980

5340-12-316-0796
Rod End Clevis

123160796
2500179-198720.000.0: RNCC: 2 | RNVC: 2
2500179-198720.000.0: RNCC: 3 | RNVC: 2

21 Dec 1988

5340-12-349-5400
Verriegelun Buegel

123495400
3300-10000.05: RNCC: 3 | RNVC: 2
3200-10102.00: RNCC: 5 | RNVC: 2

30 Nov 1999

5340-12-350-3836
Section Block Clamp

123503836
J29120344-005: RNCC: 3 | RNVC: 2

23 Mar 2000

5340-12-122-7495
Retaining Strap

121227495
NO PRIMARY REF 12-122-7495: RNCC: 3 | RNVC: 2
0009771300: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-7756
Mounting Bracket

123177756
4/0462/7044/2: RNCC: 3 | RNVC: 2

11 May 1989

5340-12-184-8313
Spring Tension Clip

121848313
5801505-3121-001: RNCC: 3 | RNVC: 2
5801505-3121.001: RNCC: 5 | RNVC: 2

21 Aug 1980

5340-12-365-9418
Mounting Bracket

123659418
9304299940: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-12-166-6039
Helical Compression Spring Retainer

121666039
WW402879C: RNCC: 3 | RNVC: 9
WW 402 879 C: RNCC: 5 | RNVC: 2
WW402879C: RNCC: 5 | RNVC: 2
WW 402 879 C: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-310-3319
Access Hole Frame

123103319
FAAB001: RNCC: 3 | RNVC: 2
FA AB 001: RNCC: 5 | RNVC: 2

11 May 1987

5340-12-348-2722
Dust And Moisture Seal Protective Cap

123482722
100.470: RNCC: 3 | RNVC: 2

20 May 1999

5340-12-190-9383
Retaining Strap

121909383
12414: RNCC: 3 | RNVC: 2
0009950168: RNCC: 5 | RNVC: 2

23 Dec 1981

5340-12-164-0234
Shock Mount Pad

121640234
12706-2100: RNCC: 2 | RNVC: 2
332109-9210.000: RNCC: 3 | RNVC: 2
12706-2100: RNCC: 5 | RNVC: 2
332109-9210.000: RNCC: 5 | RNVC: 9
12706-2100: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-6290
Access Cover

123156290
3000-318110.04: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-12-172-0943
Butt Hinge

121720943
145-90X70MM: RNCC: 3 | RNVC: 2

19 Dec 1977

5340-12-301-8854
Butt Hinge Leaf

123018854
2300107-310230: RNCC: 2 | RNVC: 2
2300107-310230: RNCC: 3 | RNVC: 2
2300107-310230: RNCC: 5 | RNVC: 9
2300107-310230: RNCC: 5 | RNVC: 9

15 Nov 1984

5340-12-321-2493
Retaining Strap

123212493
536H09754: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-12-390-7972
Liquid Holding Unit Filler Neck

123907972
4.567-027.0: RNCC: 3 | RNVC: 2

12 Dec 2012

5340-12-327-3501
Mounting Bracket

123273501
11226644500: RNCC: 3 | RNVC: 2
1122 664 4500: RNCC: 5 | RNVC: 2

14 Jan 1992

5340-12-344-5543
Angle Bracket

123445543
2396-601130.00: RNCC: 3 | RNVC: 2

6 Nov 1997

5340-12-303-4780
Rod End Connector

123034780
3141500472: RNCC: 3 | RNVC: 2

26 Mar 1985

5340-12-353-5525
Furniture Glide

123535525
2710057: RNCC: 3 | RNVC: 2

6 Apr 2001

5340-12-094-4813

5340-12-091-7027

5340-12-348-6703
Nonmetallic Bumper

123486703
1537801: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-327-1327
Mending Plate

123271327
M514283: RNCC: 3 | RNVC: 9
M514283: RNCC: 5 | RNVC: 2

5 Dec 1991

5340-12-317-3231
Double Angle Bracket

123173231
4900064-41224.001: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-316-1336
Webbing Strap

123161336
25784-50: RNCC: 2 | RNVC: 2
000-D4-20X2,5X1280-PE-RAL6031: RNCC: 6 | RNVC: 9

24 Dec 1988

5340-12-352-6133
Webbing Strap

123526133
8310-0001: RNCC: 3 | RNVC: 2

30 Nov 2000

5340-12-368-8357
Line Supporting Strap

123688357
D0105375-001: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-12-356-7257
Mounting Bracket

123567257
160-24077-17: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-12-190-2146
Spring Loaded Cylinder Fastener

121902146
5801445-30020: RNCC: 2 | RNVC: 2
5801445-30020: RNCC: 3 | RNVC: 2
5801445-30020: RNCC: 5 | RNVC: 9

12 Nov 1981

5340-12-363-8483
Double Angle Bracket

123638483
J29120366-401: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-165-5708
Nut And Bolt Locking Plate

121655708
PAN3408-05: RNCC: 3 | RNVC: 2

1 Jun 1976

5340-12-360-6854
Spacing Threaded Standoff

123606854
D0065953-001: RNCC: 3 | RNVC: 2

30 Jun 2003

5340-12-177-2314
Electrical-Mechanical Equipment Post

121772314
5800822-052-002: RNCC: 3 | RNVC: 2
5800822-052.002: RNCC: 5 | RNVC: 2

22 Jan 1979

5340-12-315-0735
Metal Runner

123150735
21-1200.04: RNCC: 3 | RNVC: 2
5900046-1200.04: RNCC: 3 | RNVC: 2
21-1200.04: RNCC: 5 | RNVC: 9
5900046-1200.04: RNCC: 5 | RNVC: 9
5900046-1200.04: RNCC: 5 | RNVC: 9

14 Sep 1988

5340-12-350-7706
Swivel Caster

123507706
LE-VPP 125R-SG-FA-FI: RNCC: 3 | RNVC: 2
LE-VPP125R-SG-FA-FI: RNCC: 5 | RNVC: 2
580.1853: RNCC: 5 | RNVC: 2

18 May 2000

5340-12-171-1201
Flush Lock

121711201
81626806059: RNCC: 3 | RNVC: 2
19360010407: RNCC: 5 | RNVC: 2
1203398: RNCC: 5 | RNVC: 2
81.62680-6059: RNCC: 5 | RNVC: 2
81-62680-6059: RNCC: 5 | RNVC: 2

9 Sep 1977

5340-12-300-6490
Mending Plate

123006490
1000091-1000.09: RNCC: 2 | RNVC: 2
1000091-1000.09: RNCC: 3 | RNVC: 2

21 Aug 1984

5340-12-344-6651
Access Cover

123446651
68105-001: RNCC: 3 | RNVC: 2

25 Nov 1997

5340-12-355-3434
Manual Control Lever

123553434
V6507-75006-121: RNCC: 2 | RNVC: 2
V6507-75006-121: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-12-703-3320
Loop Clamp

127033320
VG95211-ML-127033320: RNCC: 2 | RNVC: 2
5159A-30-1: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-700-8762
Loop Clamp

127008762
VG95211-ML-127008762: RNCC: 2 | RNVC: 2
1667S-50-13,6: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-184-3586
Door Button

121843586
5801357-1800.09: RNCC: 2 | RNVC: 2
5801357-1800.09: RNCC: 3 | RNVC: 2
5801357-1800-09: RNCC: 5 | RNVC: 2
5801357-1800-09: RNCC: 5 | RNVC: 2
5801357-1800-09: RNCC: 5 | RNVC: 9

19 Jul 1980

5340-12-301-6270
Access Cover

123016270
2500109-198800.00.0: RNCC: 3 | RNVC: 2
2500109-198800.00.0: RNCC: 5 | RNVC: 9

27 Oct 1984

5340-12-155-0696
Butt Hinge

121550696
253118: RNCC: 3 | RNVC: 2
235-0-06: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-7956
Mounting Plate

127017956
VG95211-ML-127017956: RNCC: 2 | RNVC: 2
5.12.8102.2501.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-373-6932
Pad Eye

123736932
2782-195100.001.0: RNCC: 2 | RNVC: 2
2782-195100.001.0: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-12-359-9382
Dust And Moisture Seal Boot

123599382
2500261-182400.020.0: RNCC: 2 | RNVC: 2
2500261-182400.020.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-357-5339
Nonmetallic Bumper

123575339
2500266-190000.001.0: RNCC: 2 | RNVC: 2
2500266-190000.001.0: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-185-2240
Control Rod

121852240
1000093-32233.01.0: RNCC: 2 | RNVC: 2
1000093-32233.01.0: RNCC: 3 | RNVC: 2
1000093-32233-01-0: RNCC: 5 | RNVC: 2
1000093-32233-01-0: RNCC: 5 | RNVC: 9
1000093-32233.01.0: RNCC: 5 | RNVC: 9

23 Sep 1980

5340-12-301-2657
Nonmetallic Bumper

123012657
1423-849.21(5): RNCC: 3 | RNVC: 2
700 393 1Y3: RNCC: 5 | RNVC: 2

2 Oct 1984

5340-12-328-2198
Dust And Moisture Seal Protective Plug

123282198
2-MD-006-6-00000-74-0-KU: RNCC: 3 | RNVC: 2
MD-006-6-74-KU: RNCC: 5 | RNVC: 2

23 Apr 1992

5340-12-701-8305
Dust And Moisture Seal Protective Cap

127018305
VG95211-ML-127018305: RNCC: 2 | RNVC: 2
5.99.2900.0001.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-4199
Mounting Bracket

127024199
VG95211-ML-127024199: RNCC: 2 | RNVC: 2
5.12.7070.1220.13: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-5330
Mounting Bracket

127025330
VG95211-ML-127025330: RNCC: 2 | RNVC: 2
5.51.7070.0290.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-162-1975
Retaining Clip

121621975
5801369-0700.012: RNCC: 2 | RNVC: 2
2240324003: RNCC: 5 | RNVC: 2
5801369-0700-012: RNCC: 5 | RNVC: 9
22403 24003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-144-9527
Turnbuckle Body

121449527
LN29601C06-285: RNCC: 2 | RNVC: 2
20X1-5X285M12X1-5LN29601: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-172-1549
Headless Straight Rod

121721549
1000078-311000.02: RNCC: 2 | RNVC: 2
1000078-311000-02: RNCC: 5 | RNVC: 2
1000078-311000.02: RNCC: 5 | RNVC: 2
1000078-311000-02: RNCC: 5 | RNVC: 9
1000078-311000.02: RNCC: 5 | RNVC: 9
1000078-311000.02: RNCC: 5 | RNVC: 9
1000078-311000-02: RNCC: 5 | RNVC: 9

27 Dec 1977

5340-12-196-4354
Bridge Clamp

121964354
66.3851.435.02-A002: RNCC: 3 | RNVC: 2
196659: RNCC: 5 | RNVC: 2

6 Jul 1983

5340-12-317-9446
Mounting Plate

123179446
1078202: RNCC: 3 | RNVC: 2

29 May 1989

5340-12-332-6835
Runner

123326835
40150: RNCC: 3 | RNVC: 2

6 Sep 1993

5340-12-361-7335
Multiple Angle Bracket

123617335
7802493507: RNCC: 3 | RNVC: 2

10 Nov 2003

5340-12-377-4335
Mending Plate

123774335
310494: RNCC: 3 | RNVC: 2
5183-06-10-03/35: RNCC: 5 | RNVC: 2

15 Jan 2009

5340-12-349-6099
Mounting Plate

123496099
2150.1251: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-366-2963
Manual Control Lever

123662963
105057: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-391-2775
Screw Hook

123912775
10080181: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-12-394-6443
Mounting Plate

123946443
S880M9202221: RNCC: 3 | RNVC: 2

2 Jan 2014

5340-12-365-4903
Manual Control Handle

123654903
1000-U337: RNCC: 3 | RNVC: 2

10 Jan 2005

5340-12-361-7338
Strap Hinge

123617338
4303610041: RNCC: 3 | RNVC: 2

10 Nov 2003

5340-12-317-9071
Manual Control Handle

123179071
1000042-194923: RNCC: 3 | RNVC: 2
1000042-194923: RNCC: 5 | RNVC: 9

24 May 1989

5340-12-367-4649
Loop Clamp

123674649
EN4114F05WR1: RNCC: 2 | RNVC: 2

24 Aug 2005

5340-12-043-2718

5340-12-309-1195
Retaining Strap

123091195
5802206-157000: RNCC: 2 | RNVC: 2
5358590: RNCC: 3 | RNVC: 2

16 Dec 1986

5340-12-156-2764
Nonmetallic Bumper

121562764
139217-30000-06: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-308-7214
Electrical-Mechanical Equipment Post

123087214
1281-12000.02: RNCC: 2 | RNVC: 2
159107: RNCC: 3 | RNVC: 2
1281-12000.02: RNCC: 5 | RNVC: 2

11 Nov 1986

5340-12-191-5526
Loop Clamp

121915526
DIN3016-1-A2-14-14X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A2-14-14X20-W1-2: RNCC: 3 | RNVC: 2
RS1.2X14/20: RNCC: 3 | RNVC: 2
12151738: RNCC: 5 | RNVC: 2
4219220014: RNCC: 5 | RNVC: 2
RSGU1100.2X14/20: RNCC: 5 | RNVC: 2
DIN3016-A2-14-14X20-W1-2: RNCC: 5 | RNVC: 9
6.0402.10.9.1420: RNCC: 5 | RNVC: 9

10 Feb 1982

5340-12-137-1054
Butt Hinge

121371054
DIN7954-B80-MS-BK: RNCC: 2 | RNVC: 2
B80DIN7954MS: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-5985
Loop Clamp

127015985
VG95211-ML-127015985: RNCC: 2 | RNVC: 2
5.12.6501.8054.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-343-4992
Mounting Bracket

123434992
5092-353: RNCC: 3 | RNVC: 2
F300 0T 022 5026: RNCC: 6 | RNVC: 9

26 Jun 1997

5340-12-362-2724
Nonmetallic Bumper

123622724
J92228443-003: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-375-9285
Rod End Connector

123759285
H1.2124-02-20-00.00-35: RNCC: 3 | RNVC: 2
1103348: RNCC: 5 | RNVC: 2

22 Jul 2008

5340-12-356-0499
Nonmetallic Bumper

123560499
2339-090010A11B: RNCC: 3 | RNVC: 2

16 Jan 2002

5340-12-330-0838
Dust And Moisture Seal Protective Plug

123300838
655/100-R: RNCC: 3 | RNVC: 2
GPN655/100-R: RNCC: 5 | RNVC: 2
GPN655-100-R: RNCC: 5 | RNVC: 9

30 Oct 1992

5340-12-328-0038
Spring Loaded Cylinder Fastener

123280038
1398.10.23.00: RNCC: 3 | RNVC: 2

27 Mar 1992

5340-12-356-7235
Runner

123567235
2374038: RNCC: 3 | RNVC: 2
6005.014.20.02.006: RNCC: 5 | RNVC: 9

27 Mar 2002

5340-12-328-8728
Sealing Plug Assembly

123288728
B80094214: RNCC: 3 | RNVC: 2
B888080094214: RNCC: 5 | RNVC: 2
B888080094214: RNCC: 5 | RNVC: 2

26 Jun 1992

5340-12-378-3494
Mounting Bracket

123783494
82615405023: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-168-2848
Angle Bracket

121682848
4030960240: RNCC: 3 | RNVC: 2

4 Mar 1977

5340-12-177-3383
Nonmetallic Bumper

121773383
4934280081: RNCC: 3 | RNVC: 2

29 Jan 1979

5340-12-328-8732
Sealing Plug Assembly

123288732
B80140574: RNCC: 3 | RNVC: 2
B888200140574: RNCC: 5 | RNVC: 2
B888200140574: RNCC: 5 | RNVC: 2

26 Jun 1992

5340-12-386-5901
Bumper

123865901
TYP B20X15 M6X15: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-187-1941
Retaining Strap

121871941
2300109-030000.007.0: RNCC: 2 | RNVC: 2
2300109-030000.007.0: RNCC: 3 | RNVC: 2
2300109-030000-007-0: RNCC: 5 | RNVC: 2
2300109-030000-007-0: RNCC: 5 | RNVC: 2
2300109-030000-007-0: RNCC: 5 | RNVC: 9

11 Mar 1981

5340-12-326-4237
Resilient Mount

123264237
DIN95363-B50X30-M10X28-NR40ST: RNCC: 2 | RNVC: 2
510036-M10X28.NR40.ST: RNCC: 5 | RNVC: 2
25333/B-BSTN40909M10X28: RNCC: 5 | RNVC: 2
132273-04040: RNCC: 5 | RNVC: 2
VG95363-B50X30-M10X28-NR40ST: RNCC: 5 | RNVC: 9

12 Sep 1991

5340-12-319-5721
Angle Bracket

123195721
5802295-107000: RNCC: 2 | RNVC: 2
7800591140: RNCC: 3 | RNVC: 2
5802295-107000: RNCC: 5 | RNVC: 2
452-307000-000-0: RNCC: 5 | RNVC: 2
78005 91140: RNCC: 5 | RNVC: 9

13 Oct 1989

5340-12-383-4626
Bail Handle

123834626
M-18-094.1: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-12-703-3258
Angle Bracket

127033258
VG95211-ML-127033258: RNCC: 2 | RNVC: 2
5.12.7904.8050.15: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-317-6825
Mounting Plate

123176825
P-296819-005: RNCC: 3 | RNVC: 2
P296819-005: RNCC: 5 | RNVC: 2

28 Apr 1989

5340-12-319-5107
Mounting Bracket

123195107
2300007-020000.022.0: RNCC: 2 | RNVC: 2
2300007-020000.022.0: RNCC: 3 | RNVC: 2
2300007-020000.022.0: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-338-1403
Loop Clamp

123381403
DIN3015-L-KP-3-G-23-PP: RNCC: 2 | RNVC: 2
HRGL3KP23PP: RNCC: 3 | RNVC: 2
RAPG-323: RNCC: 3 | RNVC: 2
323PPH: RNCC: 3 | RNVC: 2
323PPH: RNCC: 5 | RNVC: 2
602008677: RNCC: 5 | RNVC: 2
RAPG-323: RNCC: 5 | RNVC: 2

29 May 1995

5340-12-340-2025
Dust And Moisture Seal Protective Cap

123402025
913018010200: RNCC: 3 | RNVC: 2
913018 010200: RNCC: 5 | RNVC: 2
B10X10,3N13018: RNCC: 5 | RNVC: 2
N13018-B10X10,3: RNCC: 5 | RNVC: 2

13 Mar 1996

5340-12-143-4248
Nonmetallic Bumper

121434248
845-V4/15-NR55.ST: RNCC: 3 | RNVC: 2
V4-15: RNCC: 3 | RNVC: 2
TWH1066: RNCC: 5 | RNVC: 2
TWH1066: RNCC: 5 | RNVC: 2
TWH1066: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-392-4374
Mounting Bracket

123924374
81157405047: RNCC: 3 | RNVC: 2
81.15740-5047: RNCC: 5 | RNVC: 2

7 Jun 2013

5340-12-318-6370
Access Cover

123186370
0213 7494: RNCC: 3 | RNVC: 2
2137494EE0141-01: RNCC: 5 | RNVC: 2
02137494: RNCC: 5 | RNVC: 2
02137494EE0141-01: RNCC: 5 | RNVC: 2

2 Aug 1989

5340-12-193-4337
Hand Carrying Strap Assembly

121934337
5400027-5000: RNCC: 2 | RNVC: 2
813.05: RNCC: 3 | RNVC: 2
54082-5000: RNCC: 5 | RNVC: 9

21 Jul 1982

5340-12-336-6164
Webbing Strap

123366164
2500243-982300.00: RNCC: 2 | RNVC: 2
2768.03-2300.00: RNCC: 3 | RNVC: 2
2500243-982300.00: RNCC: 5 | RNVC: 2

1 Dec 1994

5340-12-702-6001
Loop Clamp

127026001
VG95211-ML-127026001: RNCC: 2 | RNVC: 2
5152A-22: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-146-8828
Loop Clamp

121468828
22C: RNCC: 3 | RNVC: 2
211-15220: RNCC: 5 | RNVC: 2
002755-0000: RNCC: 5 | RNVC: 2
(241)A39630-119539: RNCC: 5 | RNVC: 2
1PA39630-119539: RNCC: 5 | RNVC: 2
25704-350000T187: RNCC: 5 | RNVC: 2
25704-350000T187: RNCC: 5 | RNVC: 9
202018901: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-182-8377
Nonmetallic Bumper

121828377
DIN95364-D50X18-M10X13-NR55ST: RNCC: 2 | RNVC: 2
551004-M10X13.NR55.ST: RNCC: 5 | RNVC: 2
390402: RNCC: 5 | RNVC: 2
1400049-1200-01: RNCC: 5 | RNVC: 9
VG95364-D50X18-M10X13-NR55ST: RNCC: 5 | RNVC: 9

27 Feb 1980

5340-12-702-4136
Rod End Connector

127024136
VG95211-ML-127024136: RNCC: 2 | RNVC: 2
5.12.6500.0280.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-349-7126
Angle Bracket

123497126
FAST-621001.00: RNCC: 2 | RNVC: 2
FAST-621001.00: RNCC: 3 | RNVC: 2

28 Dec 1999

5340-12-352-2737
Access Cover

123522737
2500238-060105.000.0: RNCC: 2 | RNVC: 2
2500238-060105.000.0: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-12-321-8467
Metal Runner

123218467
C104-A24-C26: RNCC: 2 | RNVC: 2
C104-A24-C26: RNCC: 3 | RNVC: 2

3 Jul 1990

5340-12-390-4755
Headless Straight Rod

123904755
F1.4553-30-01-55.00-00: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-12-187-2103
Loop Clamp

121872103
PAN4264-40: RNCC: 3 | RNVC: 2

11 Mar 1981

5340-12-159-7712
Dust And Moisture Seal Protective Cap

121597712
14021-13010-15: RNCC: 3 | RNVC: 2
893850: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-331-9897
Nonmetallic Bumper

123319897
302140-0270.02: RNCC: 2 | RNVC: 2
VG95092A7,5X1,5X19,5X5,5NR65: RNCC: 2 | RNVC: 2
302140-0270.02: RNCC: 3 | RNVC: 2
302140-0270.02: RNCC: 5 | RNVC: 2

15 Jul 1993

5340-12-190-3346
Resilient Mount

121903346
03472642: RNCC: 3 | RNVC: 2
E5165-56-01.43: RNCC: 5 | RNVC: 2
3472642EE5051-56: RNCC: 5 | RNVC: 2
5165-56-01.43: RNCC: 5 | RNVC: 2
OQ5.26: RNCC: 5 | RNVC: 9
3472642: RNCC: 5 | RNVC: 9

23 Nov 1981

5340-12-152-1367
Ball Socket Seat

121521367
1243-110-10: RNCC: 3 | RNVC: 2
1243-110-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-349-0884
Retaining Clip

123490884
WRYUG2418: RNCC: 3 | RNVC: 2
ST46408: RNCC: 5 | RNVC: 9

22 Sep 1999

5340-12-332-8416
Spring Tension Clip

123328416
16130: RNCC: 3 | RNVC: 2

24 Sep 1993

5340-12-389-9333
Bridge Clamp

123899333
105-852537: RNCC: 3 | RNVC: 2

14 Sep 2012

5340-12-183-1100
Double Angle Bracket

121831100
42013613: RNCC: 3 | RNVC: 2
42013613KZ5059-80: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-351-8949
Mounting Bracket

123518949
2393-572000C00C: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-12-389-9214
Stand Base

123899214
8451157006: RNCC: 3 | RNVC: 2

13 Sep 2012

5340-12-316-6891
Metallic Solid Wheel

123166891
202974-4603: RNCC: 3 | RNVC: 2

2 Feb 1989

5340-12-386-8136
Dust And Moisture Seal Protective Plug

123868136
1190632: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-12-143-0096

5340-12-305-5502
Bridge Clamp

123055502
5802017-600271.00: RNCC: 2 | RNVC: 2
5802017-600271.00: RNCC: 3 | RNVC: 2

21 Nov 1985

5340-12-302-1368
Nonmetallic Bumper

123021368
4178854: RNCC: 3 | RNVC: 2
S12B.F01.07.00.005: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-183-1676
Nonmetallic Bumper

121831676
02615889: RNCC: 3 | RNVC: 2
2615889EE5505-76: RNCC: 5 | RNVC: 2

25 Mar 1980

5340-12-375-1442
Screw Hook

123751442
L851M2822210: RNCC: 3 | RNVC: 2

25 Apr 2008

5340-12-351-3202
Mounting Plate

123513202
54.1038.035.13: RNCC: 2 | RNVC: 2
54.1038.035.13: RNCC: 3 | RNVC: 2

13 Jul 2000

5340-12-326-1379
Mounting Plate

123261379
272.362.823: RNCC: 3 | RNVC: 2
272.362 823: RNCC: 5 | RNVC: 9

12 Aug 1991

5340-12-372-1458
Headless Straight Rod

123721458
S322I30A1206: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-12-382-1735
Angle Bracket

123821735
5592033240: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-338-8540
Angle Bracket

123388540
463-151710.002: RNCC: 3 | RNVC: 9
9895480: RNCC: 5 | RNVC: 9

31 Aug 1995

5340-12-124-1207
Rod End Clevis

121241207
DIN71752-G10X20-22S20K-A3P: RNCC: 2 | RNVC: 2
100200100020/014: RNCC: 3 | RNVC: 2
DIN71752-G10X20-22S20K-A3P: RNCC: 5 | RNVC: 2
100200100020/024-22S20K: RNCC: 5 | RNVC: 2
DIN71752-G10X20-22S20K-A3P: RNCC: 5 | RNVC: 2
DIN71752-G10X20-22S20K: RNCC: 5 | RNVC: 9
G10X20DIN71752-22S20K: RNCC: 5 | RNVC: 9
G10X20DIN71752-22S20K: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-378-6168
Turnbuckle Body

123786168
DIN1479-SP-M20-ST-A3P: RNCC: 2 | RNVC: 2

27 Apr 2009

5340-12-324-9834
Access Cover

123249834
330708-0100-000: RNCC: 3 | RNVC: 2
330708-0100-000: RNCC: 5 | RNVC: 9

17 Apr 1991

5340-12-307-9409
Double Angle Bracket

123079409
5801434-512300.01: RNCC: 2 | RNVC: 2
7800542301: RNCC: 3 | RNVC: 2
78005 42301: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-309-9018
Angle Bracket

123099018
0A844.32-01-17-31-002: RNCC: 3 | RNVC: 2

17 Mar 1987

5340-12-389-8652
Mounting Plate

123898652
6100129-20600.002: RNCC: 2 | RNVC: 2
6000 2164: RNCC: 3 | RNVC: 2
6100129-20600.002: RNCC: 5 | RNVC: 9
3781161ED3130-99: RNCC: 5 | RNVC: 9

6 Sep 2012

5340-12-702-4657
Mounting Bracket

127024657
VG95211-ML-127024657: RNCC: 2 | RNVC: 2
5.51.0603.1350.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-328-9699
Quick Release Plunger

123289699
GN616-M12-SN: RNCC: 3 | RNVC: 2
RBN410.2-N M12: RNCC: 3 | RNVC: 2
1612001-NIROSTA: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-326-8370
Retaining Clip

123268370
250148-198200.02.0: RNCC: 3 | RNVC: 2

31 Oct 1991

5340-12-701-3353
Rod End Connector

127013353
VG95211-ML-127013353: RNCC: 2 | RNVC: 2
5.12.5111.0040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-306-8971
Bridge Clamp

123068971
5900001-5220: RNCC: 3 | RNVC: 2
37315-000-4: RNCC: 5 | RNVC: 2

16 Apr 1986

5340-12-163-2731
Resilient Mount

121632731
0002370412: RNCC: 3 | RNVC: 2
5718154/11MN45: RNCC: 3 | RNVC: 2
0002370412: RNCC: 5 | RNVC: 2
0002370412: RNCC: 5 | RNVC: 2
0002370412: RNCC: 5 | RNVC: 2
5718 154/101.3: RNCC: 5 | RNVC: 2
5718154-11MN45: RNCC: 5 | RNVC: 2
571815411MN45: RNCC: 5 | RNVC: 2

30 May 1969

Load More Results