What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 138 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 138 of 178

5340-12-348-6152
Mounting Bracket

123486152
23111-4651.00: RNCC: 2 | RNVC: 2
23111-4651.00: RNCC: 5 | RNVC: 2
23111-4651.00: RNCC: 5 | RNVC: 9

27 Jul 1999

5340-12-301-7491
Mending Plate

123017491
2300107-500000.20: RNCC: 2 | RNVC: 2
2300107-500000.20: RNCC: 3 | RNVC: 2
2300107-500000.20: RNCC: 5 | RNVC: 9
2300107-500000.20: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-12-123-2542
Nut And Bolt Locking Plate

121232542
K17179: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-330-0438
Pad Eye

123300438
0701763: RNCC: 3 | RNVC: 2
8474300: RNCC: 5 | RNVC: 2

27 Oct 1992

5340-12-330-0186
Loop Clamp

123300186
LN9491BK17: RNCC: 2 | RNVC: 2

22 Oct 1992

5340-12-313-3592
Resilient Mount

123133592
DIN95363-BS0X34-NR55ST: RNCC: 2 | RNVC: 2
811.010.050.034.10X26,5.NR55.ST: RNCC: 5 | RNVC: 2
81110-50X34-M10X26,5.NR55.ST: RNCC: 5 | RNVC: 2
781097S2MITTEL: RNCC: 5 | RNVC: 2
VG95363-BS0X34-NR55ST: RNCC: 5 | RNVC: 9

24 Mar 1988

5340-12-174-9666
Retaining Strap

121749666
81974200084: RNCC: 3 | RNVC: 2
81.97420-0084: RNCC: 5 | RNVC: 2
1614147090: RNCC: 5 | RNVC: 2
PR0FILHALBSCHALENN0RAFL: RNCC: 5 | RNVC: 2
PROFILHALBSCH-NORAFLEX: RNCC: 5 | RNVC: 2

15 Aug 1978

5340-12-342-9314
Mounting Bracket

123429314
5084-231: RNCC: 3 | RNVC: 2

16 Apr 1997

5340-12-302-6335
Double Angle Bracket

123026335
1-2650-19-4: RNCC: 2 | RNVC: 2
1-2650-19-4: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-186-8788
Loop Clamp

121868788
375S: RNCC: 3 | RNVC: 2
ZT0375S: RNCC: 5 | RNVC: 2
ZT375S: RNCC: 5 | RNVC: 2
12H4104: RNCC: 5 | RNVC: 2
170-6197: RNCC: 5 | RNVC: 2
85-690-1400: RNCC: 6 | RNVC: 9

16 Feb 1981

5340-12-348-1614
Mounting Bracket

123481614
2300262-970493.000.0: RNCC: 2 | RNVC: 2
2300262-970493.000.0: RNCC: 3 | RNVC: 2
1899688: RNCC: 5 | RNVC: 2

27 Apr 1999

5340-12-365-2420
Strap Hinge Leaf

123652420
2500278-191560.001.0: RNCC: 3 | RNVC: 2

10 Dec 2004

5340-12-357-1571
Handle Grip

123571571
1661-182400.003.0: RNCC: 2 | RNVC: 2
1661-182400.003.0: RNCC: 3 | RNVC: 2

14 May 2002

5340-12-393-3776
Mounting Bracket

123933776
4100094-982231.001.0: RNCC: 2 | RNVC: 2
4100094-982231.001.0: RNCC: 3 | RNVC: 2

12 Sep 2013

5340-12-320-0064
Access Cover

123200064
1464.13.1.403: RNCC: 3 | RNVC: 2

27 Nov 1989

5340-12-316-1191
Mending Plate

123161191
PM-41913-006: RNCC: 3 | RNVC: 2
P-M41913-006: RNCC: 5 | RNVC: 2
PM41913-006: RNCC: 5 | RNVC: 2

23 Dec 1988

5340-12-356-4994
Dust And Moisture Seal Protective Plug

123564994
735G1/2: RNCC: 3 | RNVC: 2
909735151: RNCC: 5 | RNVC: 2
GPN735-G1/2: RNCC: 5 | RNVC: 9

6 Mar 2002

5340-12-196-9038
Shock Mount Pad

121969038
12743-270.001: RNCC: 2 | RNVC: 2
12743-270.001: RNCC: 3 | RNVC: 2
009-017.270-001: RNCC: 5 | RNVC: 2
12743-270.001: RNCC: 5 | RNVC: 9

30 Aug 1983

5340-12-174-3372
Support Hook

121743372
52-0164-000-04: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-12-350-4461
Block Clamp

123504461
J29120358-401: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-701-4788
Mounting Plate

127014788
VG95211-ML-127014788: RNCC: 2 | RNVC: 2
5.12.5811.1390.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-306-4359
Angle Bracket

123064359
V22.917.3-16: RNCC: 3 | RNVC: 2

28 Feb 1986

5340-12-335-8001
Mending Plate

123358001
2782-004310.001.0: RNCC: 2 | RNVC: 2
2782-004310.001.0: RNCC: 3 | RNVC: 2

17 Sep 1994

5340-12-181-7822
Strap Bolt

121817822
6020138: RNCC: 3 | RNVC: 2
U401800861: RNCC: 5 | RNVC: 2
7-223-0818: RNCC: 5 | RNVC: 2
U401800861: RNCC: 5 | RNVC: 2
0372944347: RNCC: 5 | RNVC: 9
372944347: RNCC: 5 | RNVC: 9

17 Dec 1979

5340-12-353-4008
Dust And Moisture Seal Protective Plug

123534008
11 11 1 341 418: RNCC: 3 | RNVC: 2
1 341 418: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-12-702-4212
Angle Bracket

127024212
VG95211-ML-127024212: RNCC: 2 | RNVC: 2
5.12.7080.1450.07: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-301-2032
Angle Bracket

123012032
A-245451-751: RNCC: 3 | RNVC: 2
A245451-751: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-123-3868
Loop Clamp

121233868
51974010060: RNCC: 3 | RNVC: 2
00004309124: RNCC: 5 | RNVC: 2
00.00430-9124: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-189-4046
Electrical-Mechanical Equipment Post

121894046
332104-1632.000: RNCC: 3 | RNVC: 2
332104-1632: RNCC: 5 | RNVC: 2
332104-1632.000: RNCC: 5 | RNVC: 9
1200032-137000.002: RNCC: 5 | RNVC: 9

24 Sep 1981

5340-12-122-5955
Loop Clamp

121225955
030-0030-014-020: RNCC: 3 | RNVC: 2
030 000 001 018: RNCC: 3 | RNVC: 2
0300030014020: RNCC: 5 | RNVC: 2
50154702: RNCC: 5 | RNVC: 2
81953120018: RNCC: 5 | RNVC: 2
0009950544: RNCC: 5 | RNVC: 2
0009957044: RNCC: 5 | RNVC: 2
81953120018: RNCC: 5 | RNVC: 2
0009953644: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-0542
Angle Bracket

123050542
A-231234-002: RNCC: 3 | RNVC: 2
A231234-002: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-328-9354
Access Cover

123289354
2300232-182090.001.0: RNCC: 2 | RNVC: 2
2300232-182090.001.0: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-176-5085
Elastic Strap

121765085
2500001-194110.00.0: RNCC: 2 | RNVC: 2
2500001-194110.00.0: RNCC: 3 | RNVC: 2
200.0505.01.00.00: RNCC: 3 | RNVC: 2
2500001-194110.00.0: RNCC: 5 | RNVC: 2
2500001-194110-00-0: RNCC: 5 | RNVC: 2
2500001-194110.00.0: RNCC: 5 | RNVC: 2
2500001-194110.00.0: RNCC: 5 | RNVC: 2
2500001-194110-00-0: RNCC: 5 | RNVC: 9
2500001-194110.00.0: RNCC: 5 | RNVC: 9
2500001-194110.00.0: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-325-1239
Helical Compression Spring Retainer

123251239
VY3.065-9: RNCC: 3 | RNVC: 2
WUV1-030584-9: RNCC: 5 | RNVC: 9

6 May 1991

5340-12-344-6971
Loop Clamp

123446971
2300311-150000.004.0: RNCC: 2 | RNVC: 2
2300311-150000.004.0: RNCC: 3 | RNVC: 2

1 Dec 1997

5340-12-150-2888
Dust And Moisture Seal Protective Plug

121502888
66244-1300-07: RNCC: 2 | RNVC: 2
1795363: RNCC: 5 | RNVC: 2
1795-363: RNCC: 5 | RNVC: 2
8413746: RNCC: 5 | RNVC: 2
8780556000: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-368-5594
Dust And Moisture Seal Protective Cap

123685594
63101080: RNCC: 3 | RNVC: 2
EZ2180: RNCC: 5 | RNVC: 2

24 Mar 2006

5340-12-354-3632
Manual Control Lever

123543632
0008330825: RNCC: 3 | RNVC: 2
0008330825: RNCC: 5 | RNVC: 2
A 000 833 08 25: RNCC: 5 | RNVC: 9

4 Jul 2001

5340-12-123-2637
Halter

121232637
K16474: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-198-2859
Mending Plate

121982859
66.3527.615.06-A001: RNCC: 3 | RNVC: 2
162900: RNCC: 5 | RNVC: 2

11 Jan 1984

5340-12-361-4339
Retaining Strap

123614339
1504307: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-316-5758
Schlosz Schluessel

123165758
1531: RNCC: 3 | RNVC: 2
GSV1531: RNCC: 5 | RNVC: 9

25 Jan 1989

5340-12-320-7125
Double Angle Bracket

123207125
9000 2311: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-359-7682
Access Cover

123597682
A1Z10304056: RNCC: 3 | RNVC: 2

10 Mar 2003

5340-12-333-3452
Access Door

123333452
81669125150: RNCC: 3 | RNVC: 2
81.66912.5150: RNCC: 5 | RNVC: 2

3 Dec 1993

5340-12-390-1931
Rim Latch

123901931
263-9003: RNCC: 3 | RNVC: 2

15 Oct 2012

5340-12-375-0745
Nonmetallic Solid Wheel

123750745
931321408: RNCC: 3 | RNVC: 2

21 Apr 2008

5340-12-180-4702
Bow Handle

121804702
3817510370: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-197-0183
Access Cover

121970183
01TL30561: RNCC: 3 | RNVC: 2

12 Sep 1983

5340-12-370-4643
Access Cover

123704643
400X10: RNCC: 3 | RNVC: 2

9 Nov 2006

5340-12-167-5487
Retaining Strap

121675487
3554258: RNCC: 3 | RNVC: 2
2852-8238-00: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-331-0432
Catch Strike

123310432
V14L15-1-1W/ZINK: RNCC: 3 | RNVC: 2
V14L15-1-1WZINK: RNCC: 5 | RNVC: 2

16 Mar 1993

5340-12-361-0544
Dust And Moisture Seal Protective Cap

123610544
450910-2820: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-12-356-9658
Angle Bracket

123569658
ED41-1310-00006-109: RNCC: 3 | RNVC: 2

19 Apr 2002

5340-12-199-1674
Angle Bracket

121991674
71100-3410-01-00: RNCC: 3 | RNVC: 2
71100-3410-01-00: RNCC: 5 | RNVC: 2
71100-3410-01-00: RNCC: 5 | RNVC: 9

3 Apr 1984

5340-12-312-3131
Retaining Strap

123123131
VG95933AR-15-CUZN37F29: RNCC: 2 | RNVC: 2
1/1D15MMN325-CUZN37F29: RNCC: 3 | RNVC: 2

15 Dec 1987

5340-12-146-5978
Clamping Catch

121465978
V951L02-1-1AD: RNCC: 3 | RNVC: 2
51L1-1-1AB: RNCC: 5 | RNVC: 2
909681209: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-8049
Butt Hinge

121968049
DIN7954-B30-ST-BK: RNCC: 2 | RNVC: 2
B30DIN7954: RNCC: 5 | RNVC: 2

18 Aug 1983

5340-12-370-5634
Webbing Strap

123705634
6.373-389.0: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-12-318-8746
Mending Plate

123188746
2300264-068520.02.0: RNCC: 2 | RNVC: 2
2300264-068520.02.0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-358-9377
Manual Control Handle

123589377
J04020000-045: RNCC: 3 | RNVC: 2

2 Dec 2002

5340-12-701-6798
Angle Bracket

127016798
VG95211-ML-127016798: RNCC: 2 | RNVC: 2
5.12.7213.8008.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-369-1181
Loop Clamp

123691181
DIN3016-1-D1-22X15-W5-CR: RNCC: 2 | RNVC: 2

24 May 2006

5340-12-317-9579
Electrical-Mechanical Equipment Post

123179579
V95148B5,5XM3X5-2.0402.30-E2A: RNCC: 2 | RNVC: 2
A 2.0402 M3X5: RNCC: 3 | RNVC: 2
2018608: RNCC: 5 | RNVC: 2

30 May 1989

5340-12-344-4740
Mounting Bracket

123444740
P-244229-014: RNCC: 3 | RNVC: 2
P244229-014: RNCC: 5 | RNVC: 2

30 Oct 1997

5340-12-393-6103
Section Block Clamp

123936103
11.43343-0090: RNCC: 3 | RNVC: 2
11.43343-0090: RNCC: 5 | RNVC: 2
433.10.058: RNCC: 5 | RNVC: 2

26 Sep 2013

5340-12-702-4831
Mounting Bracket

127024831
VG95211-ML-127024831: RNCC: 2 | RNVC: 2
5.51.0607.0170.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-361-6699
Clamping Catch

123616699
MLG-00-231240: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-349-3745
Dust And Moisture Seal Protective Plug

123493745
M-504-008-17.1: RNCC: 3 | RNVC: 2

5 Nov 1999

5340-12-327-7331
Resilient Mount

123277331
DIN95363-B100X40-NR40ST: RNCC: 2 | RNVC: 2
510055-M16X42.NR40.ST: RNCC: 5 | RNVC: 2
2533/B-BSTN4090: RNCC: 5 | RNVC: 2
25334/V-BSTN4090: RNCC: 5 | RNVC: 2
FT6100131-041: RNCC: 5 | RNVC: 9
VG95363-B100X40-NR40ST: RNCC: 5 | RNVC: 9

25 Feb 1992

5340-12-702-4301
Rod End Clevis

127024301
VG95211-ML-127024301: RNCC: 2 | RNVC: 2
5.12.8102.6601.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-338-5606
Angle Bracket

123385606
2500253-196740.000.0: RNCC: 2 | RNVC: 2
2500253-196740.000.0: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-12-386-1943
Mechanic Equipment Hardware Kit

123861943
2500262-199820.001.0: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-348-2151
Retaining Strap

123482151
2500253-192320.000.0: RNCC: 2 | RNVC: 2
2500253-192320.000.0: RNCC: 3 | RNVC: 2

7 May 1999

5340-12-356-7524
Double Angle Bracket

123567524
SK658-100300.000.0: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-199-6707
Nonmetallic Bumper

121996707
0334 0653: RNCC: 3 | RNVC: 2
03340653: RNCC: 5 | RNVC: 2
3340653EZ5058-21: RNCC: 5 | RNVC: 2
K15190-1: RNCC: 5 | RNVC: 2
334-0653EZ5058-21: RNCC: 5 | RNVC: 9

19 May 1984

5340-12-172-7348
Nonmetallic Bumper

121727348
1-213-007-3488: RNCC: 3 | RNVC: 9
42481343: RNCC: 5 | RNVC: 2
42481343EY5012-09: RNCC: 5 | RNVC: 2

14 Feb 1978

5340-12-164-8651
Webbing Strap

121648651
23302-182350: RNCC: 2 | RNVC: 2
23302-182350.00: RNCC: 2 | RNVC: 2
8404072: RNCC: 3 | RNVC: 2
0074-082: RNCC: 5 | RNVC: 2
0074082: RNCC: 5 | RNVC: 2
23302-182350: RNCC: 5 | RNVC: 9
000-A3-25X2,0X510-BW-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-162-7605
Loop Clamp

121627605
SCH812-GRAU: RNCC: 3 | RNVC: 2
SCH812GRAU: RNCC: 5 | RNVC: 2
68012: RNCC: 5 | RNVC: 2
2680121: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-174-2307
Access Cover

121742307
7881532: RNCC: 3 | RNVC: 2
7881-532: RNCC: 5 | RNVC: 2
1000025-591000-04: RNCC: 5 | RNVC: 9
1000025-591000.04: RNCC: 5 | RNVC: 9

15 Jun 1978

5340-12-191-9034
Spring Tension Clip

121919034
C106-A46-C45: RNCC: 3 | RNVC: 2
C106A46C45: RNCC: 5 | RNVC: 9

16 Mar 1982

5340-12-340-2482
Strap Fastener Loop

123402482
AFG0367405: RNCC: 3 | RNVC: 2
AFG-06-29-00-00-17: RNCC: 5 | RNVC: 2

19 Mar 1996

5340-12-172-8877
Clamping Catch

121728877
DIN3132-D50-G15X17ZN8: RNCC: 2 | RNVC: 2
A50DIN3132VERZINKT: RNCC: 5 | RNVC: 2
DIN3132-D50-G15X17-ZN8: RNCC: 5 | RNVC: 2
A50DIN3132GALZN9: RNCC: 5 | RNVC: 2

2 Mar 1978

5340-12-381-1470
Clamping Catch

123811470
6.777-043.0: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-12-363-9078
Angle Bracket

123639078
J92228240-001: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-184-7796
Mounting Plate

121847796
5801505-3161.001: RNCC: 3 | RNVC: 2
5801505-3161-001: RNCC: 5 | RNVC: 2

16 Aug 1980

5340-12-322-6492
Dust And Moisture Seal Boot

123226492
3500.020.69.00/042: RNCC: 3 | RNVC: 2
3500.20.69/42: RNCC: 5 | RNVC: 2
1804673: RNCC: 5 | RNVC: 2
1804673: RNCC: 5 | RNVC: 2

10 Sep 1990

5340-12-372-7396
Extension Drawer Slide

123727396
041657: RNCC: 3 | RNVC: 2
FR 602/250: RNCC: 5 | RNVC: 2

16 Aug 2007

5340-12-182-1881
Manual Control Handle

121821881
81658155012: RNCC: 3 | RNVC: 2
23230-182607-000-0: RNCC: 5 | RNVC: 9
23230-182607.000.0: RNCC: 5 | RNVC: 9

18 Jan 1980

5340-12-385-7963
Loop Clamp

123857963
DIN3016-1-B1-12X15-W5: RNCC: 2 | RNVC: 2

8 Jul 2011

5340-12-189-1823
Retaining Strap

121891823
8-1142-52: RNCC: 2 | RNVC: 2
8-1142.52: RNCC: 2 | RNVC: 2
8-1142.52: RNCC: 3 | RNVC: 2
8-1142-52: RNCC: 5 | RNVC: 9
8-1142.52: RNCC: 5 | RNVC: 9

9 Sep 1981

5340-12-152-2168
Strap End Clip

121522168
TL8315-0055-18: RNCC: 2 | RNVC: 2
TL8315-0055: RNCC: 4 | RNVC: 1
18VG4862: RNCC: 5 | RNVC: 9
VG4862-18: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-6071
Butt Hinge Leaf

123066071
28.04.206-031.03: RNCC: 3 | RNVC: 2
284-206-031-030: RNCC: 5 | RNVC: 2

14 Mar 1986

5340-12-303-4279
Pipe Bracket

123034279
160-714607: RNCC: 3 | RNVC: 2
160-714607: RNCC: 5 | RNVC: 9

21 Mar 1985

5340-12-387-9141
Loop Clamp

123879141
7092261: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-12-381-3898
Manual Control Lever

123813898
4221 320 003: RNCC: 3 | RNVC: 2
4221 320 003: RNCC: 5 | RNVC: 2
15017728: RNCC: 5 | RNVC: 2

9 Feb 2010

5340-12-355-3800
Barrel Bolt

123553800
1000-U167: RNCC: 3 | RNVC: 2

8 Nov 2001

5340-12-329-3218
Angle Bracket

123293218
2904 583 M1: RNCC: 3 | RNVC: 2
395928116: RNCC: 5 | RNVC: 2

5 Aug 1992

5340-12-302-6847
Nonmetallic Bumper

123026847
741840MITTEL: RNCC: 3 | RNVC: 2
57418400063: RNCC: 5 | RNVC: 2

22 Jan 1985

5340-12-090-6957

5340-12-025-9699

5340-12-302-2645
Butt Hinge Leaf

123022645
C100ZZ18203-000: RNCC: 3 | RNVC: 2

13 Dec 1984

5340-12-198-0446
Nut And Bolt Locking Plate

121980446
C42080-A6-C120: RNCC: 2 | RNVC: 2
C42080-A6-C120: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-371-1029
Lock Bolt

123711029
8806N BL31-80: RNCC: 3 | RNVC: 2
BKS 8806N BL31-80: RNCC: 5 | RNVC: 2

12 Feb 2007

5340-12-196-4365
Door Button

121964365
588.90-233007-002: RNCC: 3 | RNVC: 2

6 Jul 1983

5340-12-305-0512
Mending Plate

123050512
5801759-200000.004: RNCC: 2 | RNVC: 2
5801759-200000.004: RNCC: 3 | RNVC: 2
5801759-200000.004: RNCC: 5 | RNVC: 9

20 Sep 1985

5340-12-196-6004
Bridge Clamp

121966004
580/435-041000.01: RNCC: 2 | RNVC: 2
5801435-041000-01: RNCC: 5 | RNVC: 9

21 Jul 1983

5340-12-183-7068
Nonmetallic Bumper

121837068
DIN95364-A20X12-M6X8-NR65ST: RNCC: 2 | RNVC: 2
530019-M6X8.NR65.ST: RNCC: 5 | RNVC: 2
1292055-010000.005: RNCC: 5 | RNVC: 2
1292055-010000-005: RNCC: 5 | RNVC: 9
VG95364-A20X12-M6X8-NR65ST: RNCC: 5 | RNVC: 9

13 May 1980

5340-12-146-9072
Plug Button

121469072
251115030019: RNCC: 3 | RNVC: 2
2360-220025.23.0: RNCC: 5 | RNVC: 2
2360-220025.23.0: RNCC: 5 | RNVC: 2
2360-220025-23-0: RNCC: 5 | RNVC: 2
251115030019: RNCC: 5 | RNVC: 2
2360-220025-23-0: RNCC: 5 | RNVC: 2
2360-220025.23.0: RNCC: 5 | RNVC: 2
4232050: RNCC: 5 | RNVC: 2
2360-220025-23-0: RNCC: 5 | RNVC: 9
2360-220025.23.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5549
Mounting Bracket

127025549
VG95211-ML-127025549: RNCC: 2 | RNVC: 2
5.51.7221.0070.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-354-3886
Double Angle Bracket

123543886
J53230660-003: RNCC: 3 | RNVC: 2

6 Jul 2001

5340-12-192-3170
Angle Bracket

121923170
42316977: RNCC: 3 | RNVC: 2
42316977ED5621-01: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-314-9422
Quick Release Plunger

123149422
RBN410.1-KM5: RNCC: 3 | RNVC: 2
1605008: RNCC: 3 | RNVC: 2
KM5HWN205S: RNCC: 3 | RNVC: 2
03000-05: RNCC: 3 | RNVC: 2
GN615-M5-K: RNCC: 3 | RNVC: 2
NLM3000-05: RNCC: 5 | RNVC: 9
NLM300.05: RNCC: 5 | RNVC: 9
NLM300-05: RNCC: 5 | RNVC: 9

31 Aug 1988

5340-12-377-4832
Access Cover

123774832
8605001.3.550.11: RNCC: 3 | RNVC: 2
8605001355011: RNCC: 5 | RNVC: 2

19 Jan 2009

5340-12-196-6715
Electrical-Mechanical Equipment Post

121966715
ESK1977-3: RNCC: 3 | RNVC: 2

1 Aug 1983

5340-12-149-3752
Resilient Mount

121493752
B52X40M10X20NA50WNB612: RNCC: 3 | RNVC: 2
6126213: RNCC: 5 | RNVC: 2
B52X40M10X20NA50: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-346-6059
Nonmetallic Bumper

123466059
3682218: RNCC: 3 | RNVC: 2
368.2218: RNCC: 5 | RNVC: 2

17 Aug 1998

5340-12-195-0399
Angle Bracket

121950399
42-1543-192300.00.0: RNCC: 3 | RNVC: 2
42-1543-192300-00-0: RNCC: 5 | RNVC: 2
42-1543-192300-00-0: RNCC: 5 | RNVC: 9

5 Jan 1983

5340-12-312-7892
Mounting Bracket

123127892
5801984-984500.001.0: RNCC: 2 | RNVC: 2
5801984-984500.001.0: RNCC: 3 | RNVC: 2

5 Feb 1988

5340-12-368-2354
Metal Grille

123682354
3-18-53-90: RNCC: 3 | RNVC: 2

12 Jan 2006

5340-12-305-6865
Retaining Clip

123056865
00.8002-0.00-06: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-12-306-0701
Angle Bracket

123060701
5801984-201020.002.0: RNCC: 2 | RNVC: 2
5801984-201020.002.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-370-9892
Nonmetallic Bumper

123709892
81960200044: RNCC: 3 | RNVC: 2
81.96020-0044: RNCC: 5 | RNVC: 2
81.96020.0044: RNCC: 5 | RNVC: 2

24 Jan 2007

5340-12-328-0804
Support Hook

123280804
G24930-A16-C12: RNCC: 3 | RNVC: 2

3 Apr 1992

5340-12-384-5417
Mounting Bracket

123845417
F1.1189-30-10-10.00-62: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-12-352-7616
Lock-Release Lever

123527616
J52422122-001: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-12-312-3083
Angle Bracket

123123083
5801435-040700.03: RNCC: 3 | RNVC: 2

15 Dec 1987

5340-12-300-6628
Angle Bracket

123006628
1000091-0000.14: RNCC: 2 | RNVC: 2
1000091-0000.14: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-308-8347
Access Cover

123088347
1281-51000.11: RNCC: 2 | RNVC: 2
160271: RNCC: 3 | RNVC: 2
1281-51000.11: RNCC: 5 | RNVC: 2

21 Nov 1986

5340-12-178-5892
Mounting Bracket

121785892
T01-04B: RNCC: 3 | RNVC: 2
T01-04B: RNCC: 5 | RNVC: 9

3 May 1979

5340-12-701-3344
Mounting Bracket

127013344
VG95211-ML-127013344: RNCC: 2 | RNVC: 2
5.12.5105.1580.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-340-6881
Loop Clamp

123406881
DIN3015-L-KP-3-G-20-PA: RNCC: 2 | RNVC: 2
RANG-320: RNCC: 3 | RNVC: 2
320PAH: RNCC: 3 | RNVC: 2
5 660 199 620: RNCC: 5 | RNVC: 2

23 May 1996

5340-12-390-5354
Loop Clamp

123905354
SK1145-977220.002.0: RNCC: 3 | RNVC: 2
7112082: RNCC: 5 | RNVC: 2

21 Nov 2012

5340-12-308-2942
Angle Bracket

123082942
P-875451-002: RNCC: 3 | RNVC: 2
P875451-002: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-305-4429
Angle Bracket

123054429
4900059-323206.200.0: RNCC: 3 | RNVC: 2

7 Nov 1985

5340-12-317-7155
Strap Fastener Loop

123177155
4900059-211830.000.0: RNCC: 3 | RNVC: 2

3 May 1989

5340-12-702-4006
Mounting Bracket

127024006
VG95211-ML-127024006: RNCC: 2 | RNVC: 2
5.12.5313.1910.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-346-6454
Mending Plate

123466454
909624002: RNCC: 3 | RNVC: 2
HRL-0-DP: RNCC: 5 | RNVC: 2

20 Aug 1998

5340-12-337-4416
Dust And Moisture Seal Protective Plug

123374416
13 567: RNCC: 3 | RNVC: 2
0009977586: RNCC: 5 | RNVC: 2
02-3275: RNCC: 5 | RNVC: 2

6 Mar 1995

5340-12-356-6181
Blank Panel

123566181
SNP:SY-F1609E2-P: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-353-1821
Angle Bracket

123531821
2500238-041017.000.0: RNCC: 2 | RNVC: 2
2500238-041017.000.0: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-381-4525
Adapter

123814525
Z=30385: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-12-191-6380
Manual Control Handle

121916380
6937-400.08: RNCC: 3 | RNVC: 2
8653420: RNCC: 3 | RNVC: 9
6937-400-08: RNCC: 5 | RNVC: 2
6937-400.08: RNCC: 5 | RNVC: 9

17 Feb 1982

5340-12-381-1738
Angle Bracket

123811738
1030056-400140.006.0: RNCC: 3 | RNVC: 2

18 Jan 2010

5340-12-321-9417
Metal Runner

123219417
702-141300-954-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-188-1515
Loop Clamp

121881515
DIN3016-1-A2-32-32X15-W1-2: RNCC: 2 | RNVC: 2
RS1.2X32/15: RNCC: 3 | RNVC: 2
DIN3016-1-A2-32-32X15-W1-2: RNCC: 3 | RNVC: 2
DIN3016-A2-32-32X15-W1-2: RNCC: 5 | RNVC: 2
4217215032: RNCC: 5 | RNVC: 2
RS1100-2-32-15: RNCC: 5 | RNVC: 2
RS1100.2X32/15: RNCC: 5 | RNVC: 2
DIN3016-A2-32-32X15-W1-2: RNCC: 5 | RNVC: 2

9 Jun 1981

5340-12-394-6181
Latch Bar

123946181
8.952.08-256300.01: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-12-197-5080
Resilient Mount

121975080
2300172-188320.000.0: RNCC: 1 | RNVC: 2
2300172-188320.000.0: RNCC: 3 | RNVC: 2
2300172-188320.000.0: RNCC: 3 | RNVC: 2
2300172-188320.000.0: RNCC: 5 | RNVC: 9

27 Oct 1983

5340-12-702-4057
Mounting Plate

127024057
VG95211-ML-127024057: RNCC: 2 | RNVC: 2
5.12.6100.3560.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-312-6923
Retaining Strap

123126923
81637310140: RNCC: 3 | RNVC: 2
600857533: RNCC: 3 | RNVC: 2
81.63731.0140: RNCC: 5 | RNVC: 2

27 Jan 1988

5340-12-024-3851

5340-12-302-0824
Dust And Moisture Seal Protective Plug

123020824
3839970286: RNCC: 3 | RNVC: 2

30 Nov 1984

5340-12-387-8338
Clamping Catch

123878338
7093442: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-12-387-3319
Mechanic Equipment Hardware Kit

123873319
10026855-BUND: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-12-387-8460
Retaining Bail

123878460
7092889: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-176-4891
Spring Tension Clip

121764891
1231518EE8928-80: RNCC: 3 | RNVC: 2
0123 1518: RNCC: 5 | RNVC: 2
1231518: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-360-0045
Nonmetallic Bumper

123600045
9414751620: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-371-9710
Mounting Bracket

123719710
S282M4021102: RNCC: 2 | RNVC: 2
S282M4021102: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-12-357-5282
Mounting Bracket

123575282
0006950614: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-319-1685
Webbing Strap

123191685
ZG8127G218: RNCC: 3 | RNVC: 2
ZG8127G218: RNCC: 5 | RNVC: 9

12 Sep 1989

5340-12-360-0018
Mounting Bracket

123600018
9414295269: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-185-4683
Catch Strike

121854683
3553926: RNCC: 3 | RNVC: 2

9 Oct 1980

5340-12-386-5699
Mounting Bracket

123865699
T257M2109106: RNCC: 3 | RNVC: 2

12 Sep 2011

5340-12-364-5003
Double Angle Bracket

123645003
4257521414: RNCC: 3 | RNVC: 2

2 Oct 2004

5340-12-358-0566
Retaining Clip

123580566
0109881878: RNCC: 3 | RNVC: 2

6 Sep 2002

5340-12-307-3553
Nonmetallic Bumper

123073553
DIN95364-D14X6,3-M4X4-NR55ST: RNCC: 2 | RNVC: 2
AWN59-F2-NR55: RNCC: 3 | RNVC: 2
AWN59-F2-NR55: RNCC: 3 | RNVC: 2
AWN59-F2-NR55: RNCC: 5 | RNVC: 9
VG95364-D14X6,3-M4X4-NR55ST: RNCC: 5 | RNVC: 9

9 Jun 1986

5340-12-026-9923

5340-12-170-1307
Mending Plate

121701307
JJ44632: RNCC: 3 | RNVC: 2

29 Jun 1977

5340-12-336-2979
Protection Bellows

123362979
105-62305.41: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-12-385-7136
Mounting Bracket

123857136
5500210040: RNCC: 3 | RNVC: 2

4 Jul 2011

5340-12-187-8936
Casement Fastener

121878936
0007672701: RNCC: 3 | RNVC: 2

18 May 1981

5340-12-302-8313
Metal Runner

123028313
4900123-2700.02: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-325-8008
Metal Runner

123258008
5801984-100000.005.0: RNCC: 2 | RNVC: 2
5801984-100000.005.0: RNCC: 3 | RNVC: 2
5801984-100000.005.0: RNCC: 5 | RNVC: 2
5801984-100000.005.0: RNCC: 5 | RNVC: 9

11 Jul 1991

5340-12-339-7023
Catch Strike

123397023
2500255-199900.021.0: RNCC: 2 | RNVC: 2
2500255-199900.021.0: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-12-339-7022
Nonmetallic Bumper

123397022
2500255-199900.008.0: RNCC: 2 | RNVC: 2
2500255-199900.008.0: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-12-185-2085
Angle Bracket

121852085
F01-211130-04-0: RNCC: 3 | RNVC: 2

20 Sep 1980

5340-12-381-2358
Loop Clamp

123812358
SP-320-PP-IS-M-W10: RNCC: 3 | RNVC: 2

25 Jan 2010

5340-12-701-3420
Rod End Connector

127013420
VG95211-ML-127013420: RNCC: 2 | RNVC: 2
5.12.5111.2220.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-380-0177
Loop Clamp

123800177
DIN3016-1-D2-24-30X20-W1-2-NBR: RNCC: 2 | RNVC: 2

18 Sep 2009

5340-12-310-4424
Lock-Release Lever

123104424
P-405403-405-26H-001-53: RNCC: 3 | RNVC: 2

22 May 1987

5340-12-337-6563
Helical Compression Spring Seat

123376563
8480-8029: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-12-350-1689
Mounting Plate

123501689
2125-111710.02B: RNCC: 2 | RNVC: 2
2125-111710.02B: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-12-195-9224
Angle Bracket

121959224
51125400084: RNCC: 3 | RNVC: 2
51.12540-0084: RNCC: 5 | RNVC: 2
5000282173: RNCC: 5 | RNVC: 2

3 May 1983

5340-12-305-4771
Angle Bracket

123054771
4900059-211430.000.0/3: RNCC: 2 | RNVC: 2
4900059-211430.000.0/3: RNCC: 3 | RNVC: 2

12 Nov 1985

5340-12-701-2484
Mounting Bracket

127012484
VG95211-ML-127012484: RNCC: 2 | RNVC: 2
5.12.3600.8150.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-4247
Mechanical Stop

123584247
4037R-100000.002.0: RNCC: 2 | RNVC: 2
4037R-100000.002.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-388-1191
Loop Clamp

123881191
DIN3016-1-E1-21X15-W5-NBR: RNCC: 2 | RNVC: 2

24 Feb 2012

5340-12-360-2755
Runner

123602755
SK861-850017.001.0: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-12-174-5142
Helical Compression Spring Seat

121745142
3092910091: RNCC: 3 | RNVC: 2
7-355-0822: RNCC: 5 | RNVC: 2

5 Jul 1978

5340-12-158-9426
Electrical-Mechanical Equipment Post

121589426
AM647-32-2: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-701-7922
Mounting Bracket

127017922
VG95211-ML-127017922: RNCC: 2 | RNVC: 2
5.12.7904.0640.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-344-4686
Elastic Strap

123444686
2500255-190019.000.0: RNCC: 2 | RNVC: 2
2500255-190019.000.0: RNCC: 3 | RNVC: 2
2500255-190019.000.0: RNCC: 3 | RNVC: 2
82300-O350X20-SI-STZN-OG: RNCC: 6 | RNVC: 9

30 Oct 1997

5340-12-701-1760
Mounting Bracket

127011760
VG95211-ML-127011760: RNCC: 2 | RNVC: 2
5.12.0246.0170.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-349-2831
Headless Straight Rod

123492831
J52423175-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-362-3068
Double Angle Bracket

123623068
J92228376-001: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-12-350-5561
Mounting Bracket

123505561
2500239-150000.003.0: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-12-337-2958
Angle Bracket

123372958
2898-000000.002.0: RNCC: 2 | RNVC: 2
2898-000000.002.0: RNCC: 3 | RNVC: 2

14 Feb 1995

5340-12-190-2353
Metal Runner

121902353
18450.1M5: RNCC: 3 | RNVC: 2
18450-1M5: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-701-2274
Mounting Plate

127012274
VG95211-ML-127012274: RNCC: 2 | RNVC: 2
5.12.2010.5092.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-301-2490
Mending Plate

123012490
P-243843-403: RNCC: 3 | RNVC: 2
P243843-403: RNCC: 5 | RNVC: 2

29 Sep 1984

5340-12-701-9544
Threaded End Tensioning Tie Rod

127019544
VG95211-ML-127019544: RNCC: 2 | RNVC: 2
5.12.6500.0461.03: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-174-9696
Retaining Strap

121749696
81911012113: RNCC: 3 | RNVC: 2
23230-181955-001-0: RNCC: 5 | RNVC: 9
23230-181955.001.0: RNCC: 5 | RNVC: 9

15 Aug 1978

5340-12-190-2670
Electrical-Mechanical Equipment Post

121902670
VG95148A5XM3X12-3.1355.51-1101: RNCC: 2 | RNVC: 2
33 376-001: RNCC: 3 | RNVC: 2
VG95148A5XM3X12-3.1355.51-1101: RNCC: 3 | RNVC: 2
33376-001: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-358-3150
Mounting Bracket

123583150
2500262-192000.004.0: RNCC: 2 | RNVC: 2
2500262-192000.004.0: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-12-346-4611
Loop Clamp

123464611
DIN71555-75,5-ZNPHR5F: RNCC: 2 | RNVC: 2
06670410119: RNCC: 5 | RNVC: 2

28 Jul 1998

5340-12-198-2831
Nonmetallic Bumper

121982831
8100128-100000.01: RNCC: 2 | RNVC: 2
7835568: RNCC: 3 | RNVC: 2
7835-568: RNCC: 5 | RNVC: 2
8100128-100000.01: RNCC: 5 | RNVC: 2
8100128-100000-01: RNCC: 5 | RNVC: 9
8100128-100000.01: RNCC: 5 | RNVC: 9

10 Jan 1984

5340-12-186-6836
Headless Straight Rod

121866836
C22136-A1000-C173: RNCC: 3 | RNVC: 2
C22136A1000C173: RNCC: 5 | RNVC: 9

26 Jan 1981

5340-12-153-4694
Retaining Clip

121534694
C42117A248C316: RNCC: 3 | RNVC: 2
4669674: RNCC: 5 | RNVC: 2
H38-4727-50: RNCC: 5 | RNVC: 2
C42117-A248-C316: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-199-8445
Angle Bracket

121998445
5802017-603005.01: RNCC: 2 | RNVC: 2
5802017-603005.01: RNCC: 3 | RNVC: 2

6 Jun 1984

5340-12-312-0565
Mounting Bracket

123120565
610721391: RNCC: 3 | RNVC: 2
81.48220.5091: RNCC: 5 | RNVC: 2
81482205091: RNCC: 5 | RNVC: 2

13 Nov 1987

5340-12-172-0640
Tee Hinge

121720640
1000078-700220: RNCC: 2 | RNVC: 2
1000078-700220: RNCC: 5 | RNVC: 2
1000078-700220: RNCC: 5 | RNVC: 9

19 Dec 1977

5340-12-360-1640
Mounting Plate

123601640
2300457-620020.000: RNCC: 2 | RNVC: 2
2300457-620020.000: RNCC: 3 | RNVC: 2

11 Apr 2003

5340-12-368-4134
Retaining Clip

123684134
34293(460): RNCC: 3 | RNVC: 2

7 Mar 2006

5340-12-166-0864
Buckle

121660864
T10725: RNCC: 3 | RNVC: 2
T12920: RNCC: 5 | RNVC: 2
T10725: RNCC: 5 | RNVC: 9
T12920: RNCC: 5 | RNVC: 9

29 Jul 1976

5340-12-305-7639
Access Hole Frame

123057639
106070: RNCC: 3 | RNVC: 2

10 Dec 1985

5340-12-011-0386

5340-12-010-2707

5340-12-042-1174

5340-12-188-7758
Webbing Strap

121887758
5801479-3082: RNCC: 2 | RNVC: 2
5801479-3082: RNCC: 3 | RNVC: 2
5801479-3082: RNCC: 5 | RNVC: 9
000-D5-25X2,0X230-PE-RAL6031: RNCC: 6 | RNVC: 9

29 Jul 1981

5340-12-183-7776
Plain Solid Disk

121837776
5801517-1000-016: RNCC: 3 | RNVC: 2
3402028791: RNCC: 5 | RNVC: 2
5801517-1000-016: RNCC: 5 | RNVC: 9
34020 28791: RNCC: 5 | RNVC: 9

20 May 1980

5340-12-174-4697
Mending Plate

121744697
52-0164-400-02: RNCC: 3 | RNVC: 2

3 Jul 1978

5340-12-379-3323
Access Door Hinge

123793323
MLG-00-232110: RNCC: 3 | RNVC: 2
61403731: RNCC: 5 | RNVC: 2

14 Jul 2009

5340-12-174-6696
Spring Tension Clip

121746696
5800828-1331-005: RNCC: 3 | RNVC: 2
5800828-1331.005: RNCC: 5 | RNVC: 2

19 Jul 1978

5340-12-325-6244
Mounting Bracket

123256244
5801984-981113.000.0: RNCC: 2 | RNVC: 2
5801984-981113.000.0: RNCC: 3 | RNVC: 2

24 Jun 1991

5340-12-348-9174
Block Clamp

123489174
1626-180200.002.0: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-356-1488
Webbing Strap

123561488
4617900479: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-383-3918
Buckle

123833918
K025: RNCC: 3 | RNVC: 2

14 Oct 2010

5340-12-135-7126

5340-12-393-8720
Shimmy Damper

123938720
11.40943-0339: RNCC: 3 | RNVC: 2
11.40943-0339: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-12-336-7113
Butt Hinge

123367113
999701-121300.01: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-12-179-3568
Mounting Bracket

121793568
4704580: RNCC: 3 | RNVC: 2
5801605-211100: RNCC: 5 | RNVC: 9

25 Jun 1979

5340-12-355-9451
Double Angle Bracket

123559451
J27420223-401: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-362-5384
Angle Bracket

123625384
ED41-1388-00001-103: RNCC: 2 | RNVC: 2
ED41-1388-00001-103: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-340-0331
Spacing Threaded Standoff

123400331
DIN3015-L-AS-3-W4: RNCC: 2 | RNVC: 2
AF3-W4: RNCC: 3 | RNVC: 2

16 Feb 1996

5340-12-349-7853
Angle Bracket

123497853
FAST-203000.02: RNCC: 2 | RNVC: 2
FAST-203000.02: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-358-0704
Pawl Fastener

123580704
2500262-191320.000.0: RNCC: 2 | RNVC: 2
2500262-191320.000.0: RNCC: 3 | RNVC: 2

10 Sep 2002

5340-12-319-5384
Butt Hinge Leaf

123195384
RP988534/32: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-12-306-0696
Double Angle Bracket

123060696
5801984-202000.003.0: RNCC: 2 | RNVC: 2
5801984-202000.003.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-363-2875
Loop Clamp

123632875
DIN3015-ZKP-5-R-32-32-PP: RNCC: 2 | RNVC: 2

20 May 2004

5340-12-701-8754
Loop Clamp

127018754
VG95211-ML-127018754: RNCC: 2 | RNVC: 2
7.76.7600.1251.98: RNCC: 3 | RNVC: 2
76-7600-1251: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-336-4047
Lock-Release Lever

123364047
6100146-201000.003.0: RNCC: 2 | RNVC: 2
6100146-201000.003.0: RNCC: 3 | RNVC: 2
6100146-201000.003.0: RNCC: 5 | RNVC: 2

11 Nov 1994

5340-12-701-6027
Retaining Strap

127016027
VG95211-ML-127016027: RNCC: 2 | RNVC: 2
5.12.6601.8030.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-194-2870
Nonmetallic Bumper

121942870
P-296873-031: RNCC: 3 | RNVC: 2
P296873-031: RNCC: 5 | RNVC: 2

20 Oct 1982

5340-12-702-3814
Rod End Connector

127023814
VG95211-ML-127023814: RNCC: 2 | RNVC: 2
5.12.5101.6660.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-9494
Rod End Clevis

127019494
VG95211-ML-127019494: RNCC: 2 | RNVC: 2
5.12.5811.0231.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-187-4620
Angle Bracket

121874620
2300109-060000.027.0: RNCC: 2 | RNVC: 2
2300109-060000.027.0: RNCC: 3 | RNVC: 2
2300109-060000.027.0: RNCC: 3 | RNVC: 2
1223554: RNCC: 5 | RNVC: 2
2300109-060000-027-0: RNCC: 5 | RNVC: 9
2300109-060000.027.0: RNCC: 5 | RNVC: 9
2300109-060000-027-0: RNCC: 5 | RNVC: 9
2300109-060000-027-0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-365-8625
Dust And Moisture Seal Protective Cap-Plug

123658625
M-38-030-11.0/1: RNCC: 3 | RNVC: 2

15 Feb 2005

5340-12-305-7889
Support Hook

123057889
00.8200-4.00-02: RNCC: 3 | RNVC: 2

13 Dec 1985

5340-12-702-4921
Rod End Connector

127024921
VG95211-ML-127024921: RNCC: 2 | RNVC: 2
5.51.5101.0860.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-338-9157
Protection Bellows

123389157
251711115A01C: RNCC: 3 | RNVC: 2

7 Sep 1995

5340-12-371-6423
Dust And Moisture Seal Protective Plug

123716423
2136284: RNCC: 3 | RNVC: 2
7KK301: RNCC: 5 | RNVC: 2

2 May 2007

5340-12-310-5351
Mending Plate

123105351
78203 59212: RNCC: 2 | RNVC: 2
7820359212: RNCC: 3 | RNVC: 2
78203 59212: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-329-9023
Double Angle Bracket

123299023
272.381.123: RNCC: 3 | RNVC: 2
272.381 123: RNCC: 5 | RNVC: 9

10 Oct 1992

5340-12-390-3846
Dust And Moisture Seal Protective Cap

123903846
MB 51.20.1.11.40: RNCC: 3 | RNVC: 2

7 Nov 2012

5340-12-386-5870
Electronic Equipment Hardware Kit

123865870
1.316-205300.00: RNCC: 2 | RNVC: 2
1.316-205300.00: RNCC: 5 | RNVC: 2

13 Sep 2011

5340-12-362-8518
Access Cover

123628518
51-53206: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-12-310-7454
Loop Clamp

123107454
LB212PP: RNCC: 3 | RNVC: 2
025372: RNCC: 5 | RNVC: 2
L8212PP: RNCC: 5 | RNVC: 2

26 Jun 1987

5340-12-336-2840
Helical Compression Spring Seat

123362840
4620 335 055: RNCC: 3 | RNVC: 2
4620335055: RNCC: 5 | RNVC: 2

7 Nov 1994

5340-12-357-8641
Mounting Bracket

123578641
2300042-255361.000: RNCC: 2 | RNVC: 2
2300042-255361.000: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-12-357-3343
Mounting Bracket

123573343
8812370440: RNCC: 2 | RNVC: 2
8812370440: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-12-176-2565
Resilient Mount

121762565
431419809: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-345-8779
Mending Plate

123458779
52.0285.145.02: RNCC: 3 | RNVC: 2

11 May 1998

5340-12-043-2645

5340-12-382-6953
Retaining Strap

123826953
806280593: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-12-324-5401
Loop Clamp

123245401
DIN3016-1-D1-19X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-19X15-W5: RNCC: 3 | RNVC: 2
RSGU1.19/15-W5: RNCC: 3 | RNVC: 2
58R052-151-24: RNCC: 5 | RNVC: 2
DIN3016-1-D1-19X15-W5: RNCC: 5 | RNVC: 9
DIN3016-D1-19X15-W5: RNCC: 5 | RNVC: 9

27 Feb 1991

5340-12-162-7619
Electrical-Mechanical Equipment Post

121627619
26 703-001: RNCC: 3 | RNVC: 2
26703-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-172-3963
Cremone Bolt

121723963
6000052/23/24/136/6020138: RNCC: 3 | RNVC: 2
6000058: RNCC: 5 | RNVC: 2
601262: RNCC: 5 | RNVC: 2
437604: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-12-364-3212
Strap Fastener Loop

123643212
E38465-00: RNCC: 3 | RNVC: 2

9 Sep 2004

5340-12-195-7074
Handle Grip

121957074
2500135-000002.000.0: RNCC: 2 | RNVC: 2
2500135-000002.000.0: RNCC: 3 | RNVC: 2

30 Mar 1983

5340-12-701-7069
Angle Bracket

127017069
VG95211-ML-127017069: RNCC: 2 | RNVC: 2
5.12.7240.3023.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-9666
Access Cover

123589666
J53230180-407: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-374-5683
Cremone Bolt

123745683
1099-03: RNCC: 3 | RNVC: 2

26 Feb 2008

5340-12-701-6985
Mounting Plate

127016985
VG95211-ML-127016985: RNCC: 2 | RNVC: 2
5.12.7227.8008.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-188-5136
Helical Compression Spring Seat

121885136
2300109-186310.001.0: RNCC: 2 | RNVC: 2
2300109-186310.001.0: RNCC: 3 | RNVC: 2
2300109-186310.001.0: RNCC: 3 | RNVC: 2
2300109-186310-001-0: RNCC: 5 | RNVC: 2
2300109-186310-001-0: RNCC: 5 | RNVC: 2
2300109-186310-001-0: RNCC: 5 | RNVC: 9
2300109-186310.001.0: RNCC: 5 | RNVC: 9

15 Jul 1981

5340-12-188-4514
Mounting Plate

121884514
5802206-130300-002: RNCC: 2 | RNVC: 2
535.3130: RNCC: 3 | RNVC: 2
5353130: RNCC: 5 | RNVC: 2

13 Jul 1981

5340-12-308-6263
Access Cover

123086263
6000827: RNCC: 3 | RNVC: 2
6000827: RNCC: 5 | RNVC: 2
1256-10.079: RNCC: 5 | RNVC: 9

30 Oct 1986

5340-12-392-6657
Manual Control Handle

123926657
7803034843AA: RNCC: 3 | RNVC: 2
9999075-410104.020.0: RNCC: 5 | RNVC: 2

27 Jun 2013

5340-12-339-7165
Access Cover

123397165
2500255-199900.000.0: RNCC: 2 | RNVC: 2
2500255-199900.000.0: RNCC: 3 | RNVC: 2
2500255-199900-000-0: RNCC: 5 | RNVC: 2

3 Jan 1996

5340-12-320-5334
Loop Clamp

123205334
DIN3015-LB-K-0R-10-PP-W1: RNCC: 2 | RNVC: 2
HRL0B10PP STMBL: RNCC: 3 | RNVC: 2
RAPR2-010: RNCC: 3 | RNVC: 2
SP110PP-IS: RNCC: 3 | RNVC: 2
SP110PP-IS(US): RNCC: 5 | RNVC: 2
SP110PPIS: RNCC: 5 | RNVC: 2
RAPR2-010: RNCC: 5 | RNVC: 2
DIN3015-LB0R-10PP-W1-K: RNCC: 5 | RNVC: 2

23 Jan 1990

5340-12-177-1570
Retaining Strap

121771570
5801214-2-034: RNCC: 3 | RNVC: 2
5801214-2.034: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-177-0745
Angle Bracket

121770745
5801215-54-002: RNCC: 3 | RNVC: 2
5801215-54.002: RNCC: 5 | RNVC: 2

12 Jan 1979

5340-12-190-2758
Clamping Catch

121902758
7882805: RNCC: 3 | RNVC: 2
7882-805: RNCC: 5 | RNVC: 2
1000025-573300: RNCC: 5 | RNVC: 9

17 Nov 1981

5340-12-701-6477
Mounting Bracket

127016477
VG95211-ML-127016477: RNCC: 2 | RNVC: 2
5.12.7204.4120.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-330-7032
Webbing Strap

123307032
7300038-4000: RNCC: 2 | RNVC: 2
01155-2-SCHLAUFE -FE75-LE1080MM: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-1155-0075: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-1155-75: RNCC: 3 | RNVC: 2
6.373-463.0: RNCC: 5 | RNVC: 2
79057/SCHLAUFE-1155-0075: RNCC: 5 | RNVC: 9
6.373-463: RNCC: 5 | RNVC: 9
DIN60060-2-25X75X1080-C3/SCHLAUF: RNCC: 5 | RNVC: 9

28 Jan 1993

5340-12-303-2748
Access Hole Frame

123032748
P-886681-001: RNCC: 3 | RNVC: 2
P886681-001: RNCC: 5 | RNVC: 2

13 Mar 1985

5340-12-323-9801
Cane Bolt

123239801
P-896935-403: RNCC: 3 | RNVC: 2
P896935-403: RNCC: 5 | RNVC: 2

14 Jan 1991

5340-12-185-9566
Spring Tension Clip

121859566
751290-005-0: RNCC: 3 | RNVC: 2
4900059-751290-005-0: RNCC: 5 | RNVC: 2
1227738: RNCC: 5 | RNVC: 2
4900059-751290.005.0: RNCC: 5 | RNVC: 2
4900059-751290-005-0: RNCC: 5 | RNVC: 9
4900059-751290.005.0: RNCC: 5 | RNVC: 9

13 Nov 1980

5340-12-362-2031
Nonmetallic Bumper

123622031
J92228444-001: RNCC: 3 | RNVC: 2

23 Jan 2004

5340-12-344-4723
Spring Tension Clip

123444723
B-324312: RNCC: 3 | RNVC: 2
324312: RNCC: 5 | RNVC: 2
B-324312: RNCC: 5 | RNVC: 2
324312: RNCC: 5 | RNVC: 2

30 Oct 1997

5340-12-162-7702
Door Button

121627702
001-218.021-002: RNCC: 3 | RNVC: 2
1218-21-2: RNCC: 5 | RNVC: 2
001-218-021-002: RNCC: 5 | RNVC: 9
1218-21-2: RNCC: 5 | RNVC: 9
001-218-021-002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-8420
Mending Plate

123028420
SP05722: RNCC: 3 | RNVC: 2
20-4-598-6001: RNCC: 5 | RNVC: 9
20.4.598.6001: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-196-9021
Angle Bracket

121969021
A-295127-004: RNCC: 3 | RNVC: 2
A295127-004: RNCC: 5 | RNVC: 2

30 Aug 1983

5340-12-316-4491
Double Angle Bracket

123164491
P-050761-005: RNCC: 3 | RNVC: 2
P026782-005: RNCC: 5 | RNVC: 2
P050761-005: RNCC: 5 | RNVC: 2
P-026782-005: RNCC: 5 | RNVC: 2

18 Jan 1989

5340-12-371-5852
Access Cover

123715852
2500284-198900.000.0: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-12-300-9833
Compression Cup

123009833
TFH31,7-51,7-7,5-4TF/529: RNCC: 3 | RNVC: 2
TFH31,7-51,7-7,5: RNCC: 5 | RNVC: 2

14 Sep 1984

5340-12-315-1891
Angle Bracket

123151891
3854760036: RNCC: 3 | RNVC: 2
385 476 00 36: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-354-7439
Escutcheon Plate

123547439
T521M1302223: RNCC: 3 | RNVC: 2

21 Aug 2001

5340-12-321-6114
Mounting Bracket

123216114
124312: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-346-6798
Mounting Plate

123466798
81974880327: RNCC: 3 | RNVC: 2
81.97488.0327: RNCC: 5 | RNVC: 2

25 Aug 1998

5340-12-345-5127
Access Cover

123455127
030129357: RNCC: 3 | RNVC: 2

25 Mar 1998

5340-12-391-6027
Mounting Plate

123916027
S252M3687201: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-12-316-4493
Double Angle Bracket

123164493
P-050761-017: RNCC: 3 | RNVC: 2
P-026782-017: RNCC: 5 | RNVC: 2
P026782-017: RNCC: 5 | RNVC: 2
P050761-017: RNCC: 5 | RNVC: 2

18 Jan 1989

5340-12-324-0352
Double Angle Bracket

123240352
23305-264200.03.0: RNCC: 2 | RNVC: 2
23305-264200.03.0: RNCC: 3 | RNVC: 2
23305-264200-03-0: RNCC: 5 | RNVC: 2

17 Jan 1991

5340-12-701-3069
Angle Bracket

127013069
VG95211-ML-127013069: RNCC: 2 | RNVC: 2
5.12.5101.6351.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-168-2762
Loop Clamp

121682762
DIN3016-2-G1-50X12-W1-2: RNCC: 2 | RNVC: 2
SP50/12SKZ: RNCC: 3 | RNVC: 2
DIN3016-G1-50X12-W1-2: RNCC: 3 | RNVC: 2
1310005050: RNCC: 5 | RNVC: 2
VG95931-G50X12-W1: RNCC: 5 | RNVC: 9
VG95931G50X12W1: RNCC: 5 | RNVC: 9
DIN3016-G1-50X12-W1-2: RNCC: 5 | RNVC: 9
SP50-12ZY: RNCC: 5 | RNVC: 9

4 Mar 1977

5340-12-157-6692
Spring Tension Clip

121576692
2382-261000.04.0: RNCC: 2 | RNVC: 2
2382-261000-04-0: RNCC: 5 | RNVC: 2
2382-261000.04.0: RNCC: 5 | RNVC: 2
2382-261000.04.0: RNCC: 5 | RNVC: 2
2382-261000-04-0: RNCC: 5 | RNVC: 9
2382-261000.04.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-311-8982
Mending Plate

123118982
AZ8114T254: RNCC: 2 | RNVC: 2
AZ8114T254: RNCC: 3 | RNVC: 2
AZ8114T254: RNCC: 5 | RNVC: 9

28 Oct 1987

5340-12-168-2794
Loop Clamp

121682794
LN9491B38: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-313-6188
Resilient Mount

123136188
5800.7447: RNCC: 2 | RNVC: 2
5800.7447: RNCC: 3 | RNVC: 2
409.061 830: RNCC: 5 | RNVC: 2
409061830: RNCC: 5 | RNVC: 2
81110-25X25-M6X20.NR45.ST-SATZ: RNCC: 5 | RNVC: 2
5800.7447: RNCC: 5 | RNVC: 2

20 Apr 1988

5340-12-702-1864
Mounting Bracket

127021864
VG95211-ML-127021864: RNCC: 2 | RNVC: 2
30.7206.97.01: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-308-6794
Access Cover

123086794
1281-10000.05: RNCC: 2 | RNVC: 2
159019: RNCC: 3 | RNVC: 2
1281-10000.05: RNCC: 5 | RNVC: 2

7 Nov 1986

5340-12-304-6263
Bow Handle

123046263
VG95149A130ST-CD: RNCC: 2 | RNVC: 2
326-52-0200-31: RNCC: 3 | RNVC: 2

6 Aug 1985

5340-12-130-6071
Butt Hinge

121306071
DIN7956-32X0,7-30-ST-MS: RNCC: 2 | RNVC: 2
A32DIN7956STVMS: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-8489
Loop Clamp

127018489
5191A-25: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-329-5948
Multiple Angle Bracket

123295948
81155010766: RNCC: 3 | RNVC: 2
81.15501.0766: RNCC: 5 | RNVC: 2
81.15501-0766: RNCC: 5 | RNVC: 9

5 Sep 1992

5340-12-316-5842
Mending Plate

123165842
512214-3051.000: RNCC: 3 | RNVC: 2
512214-3051: RNCC: 5 | RNVC: 2

26 Jan 1989

5340-12-303-1164
Electrical-Mechanical Equipment Post

123031164
VG95148B11XM4X65-AL-CHR: RNCC: 2 | RNVC: 2
VG95148B11XM4X65-AL-CHR: RNCC: 3 | RNVC: 2
AWN10-M4X65-AL/C: RNCC: 5 | RNVC: 2
AWN10-M4X65-AL/C: RNCC: 5 | RNVC: 2
AWN10-M4X65-AL/C: RNCC: 5 | RNVC: 9
M4X65 AWN10-AL CHR: RNCC: 5 | RNVC: 9

26 Feb 1985

5340-12-187-9867
Resilient Mount

121879867
DIN95366-A5-NR65ST: RNCC: 2 | RNVC: 2
58541SM650: RNCC: 5 | RNVC: 2
58541,NR65ST: RNCC: 5 | RNVC: 2
58541BSTN6590: RNCC: 5 | RNVC: 2
93274-05-6: RNCC: 5 | RNVC: 2
58541.NR65.ST: RNCC: 5 | RNVC: 2
VG95366-A5-NR65ST: RNCC: 5 | RNVC: 9
58541SM650: RNCC: 5 | RNVC: 9

25 May 1981

5340-12-701-6023
Retaining Strap

127016023
VG95211-ML-127016023: RNCC: 2 | RNVC: 2
5.12.6601.1060.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-6788
Mounting Bracket

123596788
2500261-183426.000.0: RNCC: 2 | RNVC: 2
2500261-183426.000.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-326-8209
Plain Solid Disk

123268209
164504: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-12-326-8159
Webbing Strap

123268159
4063-983: RNCC: 3 | RNVC: 2

29 Oct 1991

5340-12-343-3565
Mounting Plate

123433565
55.2502.101.94: RNCC: 3 | RNVC: 2

10 Jun 1997

5340-12-379-2507
Mounting Bracket

123792507
0105865: RNCC: 3 | RNVC: 2

8 Jul 2009

5340-12-371-4237
Double Angle Bracket

123714237
409.124 849: RNCC: 3 | RNVC: 2

28 Mar 2007

5340-12-390-3286
Retaining Strap

123903286
2300559-253600.004.0: RNCC: 2 | RNVC: 2
2300559-253600.004.0: RNCC: 3 | RNVC: 2

30 Oct 2012

5340-12-319-5530
Spring Tension Clip

123195530
5801411-69052.007: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-12-312-1365
Access Cover

123121365
2300147-500400.000.0: RNCC: 2 | RNVC: 2
2300147-500400.000.0: RNCC: 3 | RNVC: 2

25 Nov 1987

5340-12-394-6191
Bumper

123946191
1220360303: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-12-366-0569
Spring Tension Clip

123660569
9439940016: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-12-372-5231
Angle Bracket

123725231
350A58.1656.20: RNCC: 3 | RNVC: 2

25 Jul 2007

5340-12-307-2452
Angle Bracket

123072452
RP988816: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-387-6565
Dust And Moisture Seal Protective Plug

123876565
GPN300F183: RNCC: 3 | RNVC: 2
300F183: RNCC: 5 | RNVC: 2

20 Jan 2012

5340-12-358-1562
Runner

123581562
2800-190000.010.0: RNCC: 2 | RNVC: 2
2800-190000.010.0: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-12-332-5314
Loop Clamp

123325314
DIN3016-1-A1-15X9-W1-2: RNCC: 2 | RNVC: 2
RS1.15/9-W1: RNCC: 3 | RNVC: 2
DIN3016-A1-15X9-W1-2: RNCC: 3 | RNVC: 2
RS1.15/9: RNCC: 5 | RNVC: 2
139.505: RNCC: 5 | RNVC: 2
DIN3016-A1-15X9-W1-2: RNCC: 5 | RNVC: 9

18 Aug 1993

5340-12-377-2476
Snap Hook

123772476
5/60-NI: RNCC: 3 | RNVC: 2
0567-NI: RNCC: 5 | RNVC: 2

19 Dec 2008

5340-12-379-0837
Access Cover

123790837
2300499-038100.22.0: RNCC: 2 | RNVC: 2
2300499-038100.22.0: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-12-701-6510
Mounting Bracket

127016510
VG95211-ML-127016510: RNCC: 2 | RNVC: 2
5.12.7206.1690.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2564
Mounting Plate

127012564
VG95211-ML-127012564: RNCC: 2 | RNVC: 2
5.12.4010.0112.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-300-7991
Angle Bracket

123007991
23114-4502.09: RNCC: 2 | RNVC: 2
23114-4502.09: RNCC: 3 | RNVC: 2
23114-4502-09: RNCC: 5 | RNVC: 9
23114-4502.09: RNCC: 5 | RNVC: 9
23114-4502-09: RNCC: 5 | RNVC: 9
23114-4502.09: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-198-3317
Resilient Mount

121983317
5259512: RNCC: 3 | RNVC: 2
52-59512-2: RNCC: 5 | RNVC: 2
52595122: RNCC: 5 | RNVC: 2

16 Jan 1984

5340-12-127-7245
Snap Hook

121277245
1013-08.08: RNCC: 2 | RNVC: 2
1013-08.08: RNCC: 3 | RNVC: 2
200581: RNCC: 5 | RNVC: 2
1013-08-08: RNCC: 5 | RNVC: 2
1013-08-08: RNCC: 5 | RNVC: 9
5340-000567: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-367-5472
Section Block Clamp

123675472
2300399-180000.004.0: RNCC: 3 | RNVC: 2

31 Aug 2005

5340-12-163-3165
Loop Clamp

121633165
DIN3016-1-A1-16X12-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-16X12-W1-2: RNCC: 3 | RNVC: 2
RS1.16/12: RNCC: 3 | RNVC: 2
4110012016: RNCC: 5 | RNVC: 2
RS1100-16-12: RNCC: 5 | RNVC: 2
RS1100.16/12: RNCC: 5 | RNVC: 2
VG95931-A16X12-W1: RNCC: 5 | RNVC: 9
VG95931A16X12W1: RNCC: 5 | RNVC: 9
DIN3016-A1-16X12-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-358-9077
Angle Bracket

123589077
3833020840: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-12-393-2735
Casement Fastener

123932735
0552513: RNCC: 3 | RNVC: 2
00552513: RNCC: 5 | RNVC: 2

4 Sep 2013

5340-12-161-1151
Rod End Clevis

121611151
A10LN29607: RNCC: 2 | RNVC: 2
A10LN29607: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-377-7927
Bumper

123777927
313138: RNCC: 3 | RNVC: 2

11 Feb 2009

5340-12-361-7869
Mounting Plate

123617869
J92228655-001: RNCC: 3 | RNVC: 2

18 Nov 2003

5340-12-344-9488
Butt Hinge Leaf

123449488
P-295666-021: RNCC: 3 | RNVC: 2
P295666-021: RNCC: 5 | RNVC: 2

14 Jan 1998

5340-12-313-7180
Mending Plate

123137180
P-085017-011: RNCC: 3 | RNVC: 2
P085017-011: RNCC: 5 | RNVC: 2

28 Apr 1988

5340-12-185-0336
Butt Hinge Leaf

121850336
F01-240143-00-0: RNCC: 3 | RNVC: 2

4 Sep 1980

5340-12-701-6261
Mounting Bracket

127016261
VG95211-ML-127016261: RNCC: 2 | RNVC: 2
5.12.7040.1271.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5594
Angle Bracket

127025594
VG95211-ML-127025594: RNCC: 2 | RNVC: 2
5.51.7504.1721.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-393-0077
Mounting Plate

123930077
864064009: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-312-1813
Mounting Bracket

123121813
281801935: RNCC: 3 | RNVC: 2
81.41860.0038: RNCC: 5 | RNVC: 2
81418600038: RNCC: 5 | RNVC: 2

1 Dec 1987

5340-12-368-9261
Angle Bracket

123689261
0043197: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-190-3162
Resilient Mount

121903162
311261325: RNCC: 3 | RNVC: 2

19 Nov 1981

5340-12-375-1412
Retaining Strap

123751412
29966260: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-196-7262
Mending Plate

121967262
2360-261140.01.0: RNCC: 2 | RNVC: 2
2360-261140.01.0: RNCC: 3 | RNVC: 2
2360-261140.01.0: RNCC: 5 | RNVC: 2
2360-261140-01-0: RNCC: 5 | RNVC: 9

8 Aug 1983

5340-12-313-5685
Mending Plate

123135685
4900059-734301.007.0: RNCC: 3 | RNVC: 2
1228664: RNCC: 5 | RNVC: 2
4900059-734301-007.0: RNCC: 5 | RNVC: 2

16 Apr 1988

5340-12-305-2214
Access Door Hinge

123052214
VG95211-ML-123052214: RNCC: 2 | RNVC: 2
F01-240110B02-0: RNCC: 3 | RNVC: 2

9 Oct 1985

5340-12-701-8066
Butt Hinge

127018066
VG95211-ML-127018066: RNCC: 2 | RNVC: 2
5.12.8700.8031.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-197-5651
Mending Plate

121975651
4900059-111310.001.0: RNCC: 3 | RNVC: 2
4900059-111310-001-0: RNCC: 5 | RNVC: 2

3 Nov 1983

5340-12-386-2086
Caster Wheel

123862086
2800-196711.003.0: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-174-8101
Resilient Mount

121748101
DIN95363-A50X40-NR45ST: RNCC: 4 | RNVC: 1
81100-50X40-M10X25.NR45.ST: RNCC: 5 | RNVC: 2
57810920012: RNCC: 5 | RNVC: 2
781092WEICH: RNCC: 5 | RNVC: 2
1.50.40.1.45NR/ST: RNCC: 5 | RNVC: 2
1.50.40.1.45NRST: RNCC: 5 | RNVC: 2
811.000.050.040.10X25.NR45.ST: RNCC: 5 | RNVC: 2
VG95363-A50X40-NR45ST: RNCC: 5 | RNVC: 9
VG95363A50X40NR45ST: RNCC: 5 | RNVC: 9

3 Aug 1978

5340-12-387-6914
Spacing Threaded Standoff

123876914
9999044-310000.002.0: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-12-701-6389
Mounting Plate

127016389
VG95211-ML-127016389: RNCC: 2 | RNVC: 2
5.12.7070.1590.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-163-8146
Clamping Catch

121638146
NO PRIMARY REF 12-163-8146: RNCC: 3 | RNVC: 2
12231: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-163-3404
Lock-Release Lever

121633404
0141200003: RNCC: 3 | RNVC: 2
01412.00-30GRAD-GRAU: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-320-3034
Angle Bracket

123203034
0224 0067: RNCC: 3 | RNVC: 2
02240067EE0148-01: RNCC: 5 | RNVC: 2

29 Dec 1989

5340-12-312-2115
Double Angle Bracket

123122115
4900123-911000.25: RNCC: 3 | RNVC: 2
4900123-911000.25: RNCC: 5 | RNVC: 2
4900123-911000.25: RNCC: 5 | RNVC: 9

4 Dec 1987

5340-12-326-4447
Mounting Plate

123264447
3964310042: RNCC: 3 | RNVC: 2

17 Sep 1991

5340-12-360-0052
Manual Control Lever

123600052
9415400084: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-326-4003
Angle Bracket

123264003
01TL30678: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-12-302-4772
Headless Straight Rod

123024772
5015.44: RNCC: 3 | RNVC: 2

4 Jan 1985

5340-12-331-6300
Mounting Plate

123316300
6128225: RNCC: 3 | RNVC: 2

2 Jun 1993

5340-12-302-2056
Electrical-Mechanical Equipment Post

123022056
5121253: RNCC: 3 | RNVC: 2

8 Dec 1984

5340-12-368-5163
Access Cover

123685163
570025335: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-12-316-8279
Butt Hinge Leaf

123168279
2300279-9829.01: RNCC: 2 | RNVC: 2
2300279-9829.01: RNCC: 3 | RNVC: 2
2300279-9829.01: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-150-9784
Expansion Shield

121509784
S6: RNCC: 3 | RNVC: 2
50106: RNCC: 5 | RNVC: 2
2501061: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-176-8299
Resilient Mount

121768299
81962100196: RNCC: 3 | RNVC: 2
81.96210.0196: RNCC: 5 | RNVC: 2

20 Dec 1978

5340-12-375-7110
Loop Clamp

123757110
2024900641: RNCC: 3 | RNVC: 2
2024900641: RNCC: 5 | RNVC: 2

26 Jun 2008

5340-12-701-6867
Mounting Bracket

127016867
VG95211-ML-127016867: RNCC: 2 | RNVC: 2
5.12.7220.2211.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-195-5706
Hand Crank

121955706
VG85087-B-125X11-AM: RNCC: 2 | RNVC: 2
VG85087-B-125X11-AM: RNCC: 3 | RNVC: 2
VG85087-B-125X11-AM: RNCC: 3 | RNVC: 2
VG85087-B-125X11-AM: RNCC: 3 | RNVC: 9
B125X11VG85087-RG5: RNCC: 5 | RNVC: 9

14 Mar 1983

5340-12-702-5428
Mounting Bracket

127025428
VG95211-ML-127025428: RNCC: 2 | RNVC: 2
5.51.7210.0683.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-306-0776
Angle Bracket

123060776
P-244584-063: RNCC: 3 | RNVC: 2
P244584-063: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-377-6031
Mounting Bracket

123776031
2500308-187080.000.0: RNCC: 3 | RNVC: 2

28 Jan 2009

5340-12-311-5482
Angle Bracket

123115482
P-086452-401: RNCC: 3 | RNVC: 2
P086452-401: RNCC: 5 | RNVC: 2

16 Sep 1987

5340-12-165-3566
Nonmetallic Bumper

121653566
9763: RNCC: 3 | RNVC: 2
TBK146T52: RNCC: 5 | RNVC: 2
C20122-Z146-C52: RNCC: 5 | RNVC: 2
C20122Z146C52: RNCC: 5 | RNVC: 2

23 Apr 1976

5340-12-177-4500
Platte

121774500
4213050504: RNCC: 3 | RNVC: 2
4134-273: RNCC: 5 | RNVC: 2
4134273: RNCC: 5 | RNVC: 2
0147709: RNCC: 5 | RNVC: 2
0530870: RNCC: 5 | RNVC: 2
147-0453: RNCC: 5 | RNVC: 9
147709: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-148-8318
Handle Grip

121488318
DAB6DUNKELGRAU: RNCC: 3 | RNVC: 2
6.439-008.0: RNCC: 5 | RNVC: 2
DAB6: RNCC: 5 | RNVC: 2
6-439-008: RNCC: 5 | RNVC: 9
6.439-008: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-1139
Mounting Bracket

127011139
VG95211-ML-127011139: RNCC: 2 | RNVC: 2
4.49.7800.0545.00: RNCC: 3 | RNVC: 2
94-7800-545: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-340-0322
Mending Plate

123400322
DIN3015-L-DP-1-W4: RNCC: 2 | RNVC: 2
DP1A-W4: RNCC: 3 | RNVC: 2

16 Feb 1996

5340-12-187-9865
Hand Crank

121879865
1538-320.03(3): RNCC: 3 | RNVC: 2
1538-320-03-3: RNCC: 5 | RNVC: 2

25 May 1981

5340-12-194-4716
Plug Button

121944716
65.7091.100.02-A001: RNCC: 3 | RNVC: 2
207390: RNCC: 5 | RNVC: 2
65-7091-100-02: RNCC: 5 | RNVC: 2
5801541-100000.002.0: RNCC: 5 | RNVC: 9

8 Nov 1982

5340-12-701-6486
Mounting Plate

127016486
VG95211-ML-127016486: RNCC: 2 | RNVC: 2
5.12.7204.8198.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-379-1697
Loop Clamp

123791697
DIN3016-1-D1-12X15-W5-CR: RNCC: 2 | RNVC: 2

30 Jun 2009

5340-12-157-6534
Buckle

121576534
N16-6-5F: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-173-2190
Nonmetallic Bumper

121732190
DIN95364-C30X13-M8-NR55ST: RNCC: 2 | RNVC: 2
540000-30X13-M8.NR55.ST: RNCC: 5 | RNVC: 2
4164786: RNCC: 5 | RNVC: 2
31660/IH,NR55ST: RNCC: 5 | RNVC: 2
31660/IH-BSTN5590: RNCC: 5 | RNVC: 2
1010293006: RNCC: 5 | RNVC: 2
31660IH: RNCC: 5 | RNVC: 2
VG95364-C30X13-M8-NR55ST: RNCC: 5 | RNVC: 9

29 Mar 1978

5340-12-318-1792
Mounting Bracket

123181792
536K02511: RNCC: 3 | RNVC: 2

19 Jun 1989

5340-12-308-1601
Sliding Stay

123081601
0346 9087: RNCC: 3 | RNVC: 2
3469087: RNCC: 5 | RNVC: 2
3469087EE0141-39: RNCC: 5 | RNVC: 2

9 Sep 1986

5340-12-301-7020
Nonmetallic Bumper

123017020
116 053: RNCC: 3 | RNVC: 2
106501: RNCC: 5 | RNVC: 2
116053: RNCC: 5 | RNVC: 2
5290: RNCC: 5 | RNVC: 2
116053: RNCC: 5 | RNVC: 2
106501: RNCC: 5 | RNVC: 9
5290: RNCC: 5 | RNVC: 9
116 053: RNCC: 5 | RNVC: 9
116053: RNCC: 5 | RNVC: 9
3004: RNCC: 5 | RNVC: 9

3 Nov 1984

5340-12-310-0125
Resilient Mount

123100125
061 285 12: RNCC: 3 | RNVC: 2
D06128512: RNCC: 5 | RNVC: 2

27 Mar 1987

5340-12-149-7199
An Scharnierlappen

5340-12-150-6798
Elek Gewindezapfen

5340-12-150-7258
Spannschlosz

5340-12-026-9927

5340-12-373-0642
Snap Hook

123730642
9674351B: RNCC: 3 | RNVC: 2

21 Sep 2007

5340-12-318-9021
Door Handle

123189021
731.06.108: RNCC: 3 | RNVC: 2
V731.06.108: RNCC: 5 | RNVC: 2

24 Aug 1989

5340-12-359-9699
Mounting Bracket

123599699
9412851440: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-315-0102
Plain Solid Disk

123150102
025105283: RNCC: 3 | RNVC: 9

7 Sep 1988

5340-12-373-1724
Spring Tension Clip

123731724
2019920030: RNCC: 3 | RNVC: 2
201 992 00 30: RNCC: 5 | RNVC: 2
A2019920030: RNCC: 5 | RNVC: 9

5 Oct 2007

5340-12-391-6272
Loop Clamp

123916272
I008097: RNCC: 3 | RNVC: 2

22 Mar 2013

5340-12-386-4284
Mounting Plate

123864284
72300058: RNCC: 3 | RNVC: 2

31 Aug 2011

5340-12-150-2213

5340-12-094-9770

5340-12-041-0858

5340-12-701-6218
Mounting Plate

127016218
VG95211-ML-127016218: RNCC: 2 | RNVC: 2
5.12.7020.1520.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-9482
Rod End Clevis

127019482
VG95211-ML-127019482: RNCC: 2 | RNVC: 2
5.12.5111.5715.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-197-8512
Expansion Plug

121978512
23114-0401.04: RNCC: 2 | RNVC: 2
23114-0401.04: RNCC: 3 | RNVC: 2
23114-0401-04: RNCC: 5 | RNVC: 9
23114-0401.04: RNCC: 5 | RNVC: 9
23114-0401-04: RNCC: 5 | RNVC: 9
23114-0401.04: RNCC: 5 | RNVC: 9

29 Nov 1983

5340-12-357-2761
Mechanical Stop

123572761
1015-0008: RNCC: 3 | RNVC: 2

29 May 2002

5340-12-365-5905
Angle Bracket

123655905
J32420062-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-308-4285
Electrical-Mechanical Equipment Post

123084285
VG95148B13XM6X60-ST: RNCC: 2 | RNVC: 2
VG95148B13XM6X60-ST: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-12-178-7815
Electrical-Mechanical Equipment Post

121787815
12326-01: RNCC: 3 | RNVC: 2
484549: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-340-7763
Angle Bracket

123407763
20-7260-140: RNCC: 3 | RNVC: 2

11 Jun 1996

5340-12-301-7488
Angle Bracket

123017488
2300107-110130.03: RNCC: 2 | RNVC: 2
2300107-110130.03: RNCC: 3 | RNVC: 2
2300107-110130.03: RNCC: 5 | RNVC: 9
2300107-110130.03: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-12-197-3563
Loop Clamp

121973563
DIN3016-D2-10-12X12-W1-2: RNCC: 2 | RNVC: 2
DIN3016-D10-12X12-W1: RNCC: 3 | RNVC: 2
RSGU1.10-12/12: RNCC: 3 | RNVC: 2
4219050010: RNCC: 5 | RNVC: 2
RSGU1100-10-12-12: RNCC: 5 | RNVC: 2
RSGU1100.10-12/12: RNCC: 5 | RNVC: 2
DIN3016-D10-12X12-W1: RNCC: 5 | RNVC: 9

17 Oct 1983

5340-12-316-4731
Case Corner

123164731
P-050763-005: RNCC: 3 | RNVC: 2
P050763-005: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-195-8106
Double Angle Bracket

121958106
P-145202-071: RNCC: 3 | RNVC: 2
P145202-071: RNCC: 5 | RNVC: 2

19 Apr 1983

5340-12-197-5855
Mending Plate

121975855
A-230129-229: RNCC: 3 | RNVC: 2
A230129-229: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-197-7692
Angle Bracket

121977692
A-145401-105: RNCC: 3 | RNVC: 2
A145401-105: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-322-0756
Elastic Strap

123220756
9000 8186: RNCC: 3 | RNVC: 2

20 Jul 1990

5340-12-387-9288
Loop Clamp

123879288
7093766: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-312-7278
Mending Plate

123127278
3818260611: RNCC: 3 | RNVC: 2
381 826 06 11: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-198-6690
Lock-Release Lever

121986690
4072 206 005: RNCC: 3 | RNVC: 2
4072206005: RNCC: 5 | RNVC: 9

17 Feb 1984

5340-12-325-5490
Filler Opening Cap

123255490
0005015615: RNCC: 3 | RNVC: 2

17 Jun 1991

5340-12-307-7049
Loop Clamp

123077049
RP82685: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-339-2059
Swivel Caster

123392059
L-VPP 80G: RNCC: 3 | RNVC: 2
L-VPP80G: RNCC: 5 | RNVC: 2

25 Oct 1995

5340-12-376-2096
Swivel Caster

123762096
3470HUR100P62: RNCC: 3 | RNVC: 2
4031582303650: RNCC: 5 | RNVC: 2

25 Aug 2008

5340-12-365-7554
Cushioning Pad

123657554
CBD45419P15: RNCC: 3 | RNVC: 2

1 Feb 2005

5340-12-360-3516
Spring Tension Clip

123603516
0009502203: RNCC: 3 | RNVC: 2
0009502203: RNCC: 5 | RNVC: 2

13 May 2003

5340-12-358-9207
Double Angle Bracket

123589207
3852952940: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-376-9031
Halter

123769031
22.02385: RNCC: 3 | RNVC: 2
0008300514: RNCC: 5 | RNVC: 2

20 Nov 2008

5340-12-189-0217
Detent Plunger

121890217
158 256: RNCC: 3 | RNVC: 2
158256: RNCC: 5 | RNVC: 2
158 256: RNCC: 5 | RNVC: 9
158256: RNCC: 5 | RNVC: 9

19 Aug 1981

5340-12-346-4634
Loop Clamp

123464634
2534492: RNCC: 3 | RNVC: 2
2534492: RNCC: 5 | RNVC: 2

28 Jul 1998

5340-12-332-4356
Runner

123324356
6017400164: RNCC: 3 | RNVC: 2

10 Aug 1993

5340-12-043-9341

5340-12-702-4193
Angle Bracket

127024193
VG95211-ML-127024193: RNCC: 2 | RNVC: 2
5.12.7070.1190.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-186-6521
Headless Grooved Rod

121866521
C22136-A1000-C172: RNCC: 3 | RNVC: 2
C22136A1000C172: RNCC: 5 | RNVC: 9

23 Jan 1981

5340-12-364-4821
Spacing Threaded Standoff

123644821
VG95148C7XM4X25-2.0380.30-E2A: RNCC: 2 | RNVC: 2

1 Oct 2004

5340-12-185-0013
Angle Bracket

121850013
F01-240000-01-0: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-12-312-7306
Loop Clamp Kit

123127306
ZWRS8003.6-6/12: RNCC: 3 | RNVC: 2
0121 8720: RNCC: 5 | RNVC: 2
01218720KS8932-60: RNCC: 5 | RNVC: 2
1218720: RNCC: 5 | RNVC: 2
4108003000: RNCC: 5 | RNVC: 2
H3260-B6-6X12/12: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-345-9322
Door Button

123459322
5.321-271.0: RNCC: 3 | RNVC: 2
5.321-271: RNCC: 5 | RNVC: 9

19 May 1998

5340-12-144-3909
Clamping Catch

121443909
DIN3133-D130-K30X107ZN8: RNCC: 2 | RNVC: 2
A130DIN3133GALZN8C: RNCC: 5 | RNVC: 2
A130DIN3133GALZN9: RNCC: 5 | RNVC: 2
A130DIN3133VERZINKT: RNCC: 5 | RNVC: 2
DIN3133-A130-ST-FE/ZN8C: RNCC: 5 | RNVC: 2
DIN3133-D130-K30X107-ZN8: RNCC: 5 | RNVC: 2
945344: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-156-6498
Resilient Mount

121566498
DIN95363-A6X7-CR45ST: RNCC: 2 | RNVC: 2
500002-M3X6.CR45.ST: RNCC: 5 | RNVC: 2
16863/A-BSMQ4590: RNCC: 5 | RNVC: 2
16863BSMQ4590: RNCC: 5 | RNVC: 2
16863,CR45ST: RNCC: 5 | RNVC: 2
A7AWN59GU22SW: RNCC: 5 | RNVC: 9
AWN59-A7-CR45: RNCC: 5 | RNVC: 9
VG95363-A6X7-CR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-182-5498
Dust And Moisture Seal Protective Plug

121825498
HK100CK11-111: RNCC: 3 | RNVC: 2
41.4901-0100.0: RNCC: 5 | RNVC: 2
21161-9-509: RNCC: 5 | RNVC: 2
0287 3614: RNCC: 5 | RNVC: 2
2873614: RNCC: 5 | RNVC: 2
2873614EZ8928-63: RNCC: 5 | RNVC: 2
10ATE N14471: RNCC: 5 | RNVC: 2
HK100CK11-111: RNCC: 5 | RNVC: 2

11 Feb 1980

5340-12-702-8594
Mechanical Stop

127028594
53-04045003064: RNCC: 2 | RNVC: 2

5 Jan 1996

5340-12-157-9511
Retaining Strap

121579511
WK4000-8005-07: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-316-7912
Access Cover

123167912
5800822-051.045: RNCC: 3 | RNVC: 2
5800822-051.045: RNCC: 5 | RNVC: 9

14 Feb 1989

5340-12-703-3432
Retaining Strap

127033432
VG95211-ML-127033432: RNCC: 2 | RNVC: 2
N1119-529: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-177-6384
Rod End Connector

121776384
S51522-0003: RNCC: 3 | RNVC: 2

12 Feb 1979

5340-12-004-0068

5340-12-308-5624
Lock-Release Lever

123085624
3.20609.00: RNCC: 3 | RNVC: 9
122129343: RNCC: 5 | RNVC: 2
F300 0T 001 8566: RNCC: 6 | RNVC: 9

23 Oct 1986

5340-12-368-8455
Rim Latch Set

123688455
1030010-180870.000.0: RNCC: 3 | RNVC: 2

27 Apr 2006

5340-12-193-0007
Access Cover

121930007
4616710236: RNCC: 3 | RNVC: 2
4616710236: RNCC: 5 | RNVC: 2
721 1 72 205: RNCC: 5 | RNVC: 9

11 Jun 1982

5340-12-354-8117
Lock Key

123548117
5.041.004.0: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-316-4758
Double Angle Bracket

123164758
22014.0.04.100.01: RNCC: 2 | RNVC: 2
22014.0.04.100.01: RNCC: 3 | RNVC: 2

19 Jan 1989

5340-12-312-7043
Support Hook

123127043
2300223-261020.01.0: RNCC: 2 | RNVC: 2
2300223-261020.01.0: RNCC: 3 | RNVC: 2

28 Jan 1988

5340-12-356-5665
Caster Frame

123565665
0.0.356.33: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-12-359-6797
Access Cover

123596797
2500261-182408.000.0: RNCC: 2 | RNVC: 2
2500261-182408.000.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-331-6715
Loop Clamp

123316715
X12-506-16: RNCC: 3 | RNVC: 2
6175206: RNCC: 5 | RNVC: 2
1132164: RNCC: 5 | RNVC: 2
X12-5-16: RNCC: 5 | RNVC: 2

7 Jun 1993

5340-12-386-1912
Angle Bracket

123861912
2500262-394311.001.0: RNCC: 3 | RNVC: 2

16 Aug 2011

5340-12-366-7450
Rim Lock

123667450
3.30.0500.0: RNCC: 3 | RNVC: 2
0.110.003.001: RNCC: 5 | RNVC: 2

2 Jun 2005

5340-12-305-3268
Retaining Strap

123053268
2300007-261011.000.0: RNCC: 2 | RNVC: 2
2300007-261011.000.0: RNCC: 3 | RNVC: 2

22 Oct 1985

5340-12-378-3899
Access Cover

123783899
2500262-250400.000.0: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-123-0802
Dust And Moisture Seal Protective Plug

121230802
0154-01-07-04: RNCC: 3 | RNVC: 2
3368743EF0154-01: RNCC: 5 | RNVC: 2
0797-002: RNCC: 5 | RNVC: 2
0336 8743: RNCC: 5 | RNVC: 2
0797002: RNCC: 5 | RNVC: 2
8434940: RNCC: 5 | RNVC: 2
3368743: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-042-5552

5340-12-389-4457
Dust And Moisture Seal Protective Cap

123894457
Z=1 900 508 017: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-12-366-5048
Cushioning Pad

123665048
2 0025-873: RNCC: 3 | RNVC: 2
2 0025-873: RNCC: 5 | RNVC: 2

2 May 2005

5340-12-701-3329
Mounting Bracket

127013329
5.12.5105.0660.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-300-6706
Sealing Plug Assembly

123006706
4353200096: RNCC: 3 | RNVC: 2
4353200096: RNCC: 5 | RNVC: 2

22 Aug 1984

5340-12-302-1232
Nonmetallic Bumper

123021232
3875280084: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-12-322-7735
Nonmetallic Solid Wheel

123227735
5200.111.600.000.4: RNCC: 3 | RNVC: 9
52001116000004: RNCC: 5 | RNVC: 9

21 Sep 1990

5340-12-370-0585
Swivel Caster

123700585
3477PVO200P63: RNCC: 3 | RNVC: 2
UT 15069: RNCC: 5 | RNVC: 2

12 Sep 2006

5340-12-311-2377
Retaining Strap

123112377
2300033-430000.13: RNCC: 2 | RNVC: 2
2300033-430000.13: RNCC: 5 | RNVC: 9
2300033-430000.13: RNCC: 5 | RNVC: 9

7 Aug 1987

5340-12-128-6662

5340-12-194-8730
Electrical-Mechanical Equipment Post

121948730
3412028818: RNCC: 3 | RNVC: 2
34120 28818: RNCC: 5 | RNVC: 2

14 Dec 1982

5340-12-317-9049
Protection Bellows

123179049
8920: RNCC: 3 | RNVC: 2

24 May 1989

5340-12-312-1566
Mounting Bracket

123121566
JJ54842: RNCC: 3 | RNVC: 2

27 Nov 1987

5340-12-372-2160
Butt Hinge

123722160
KL 1592.000: RNCC: 3 | RNVC: 2
1383772: RNCC: 5 | RNVC: 2

28 Jun 2007

5340-12-375-4621
Pipe Hanger

123754621
1520588: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-12-357-6469
Ball Socket Seat

123576469
0019910322: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-12-701-6430
Mounting Plate

127016430
VG95211-ML-127016430: RNCC: 2 | RNVC: 2
5.12.7204.0120.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-188-9244
Electrical-Mechanical Equipment Post

121889244
2500075-193640.002.0: RNCC: 2 | RNVC: 2
2500075-193640.002.0: RNCC: 3 | RNVC: 2
2500075-193640-002-0: RNCC: 5 | RNVC: 9
2500075-193640-002-0: RNCC: 5 | RNVC: 9
2500075-193640.002.0: RNCC: 5 | RNVC: 9

10 Aug 1981

5340-12-146-8494
Loop Clamp

121468494
DIN3016-1-E2-7-12X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E2-7-12X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.7-12/15: RNCC: 3 | RNVC: 2
RSGU7-12-15: RNCC: 5 | RNVC: 2
4209101007: RNCC: 5 | RNVC: 2
RSGU7-12/15: RNCC: 5 | RNVC: 2
DIN3016-E2-7-12X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-195-2319
Loop Clamp

121952319
DIN3016-1-A1-104X20-W1-2: RNCC: 2 | RNVC: 2
RS1.104/20: RNCC: 3 | RNVC: 2
DIN3016-A1-104X20-W1-2: RNCC: 3 | RNVC: 2
4110020104: RNCC: 5 | RNVC: 2
RS1100.104/20: RNCC: 5 | RNVC: 2
DIN3016-A1-104X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-A104X20-W1: RNCC: 5 | RNVC: 9

27 Jan 1983

5340-12-702-0215
Loop Clamp

127020215
VG95211-ML-127020215: RNCC: 2 | RNVC: 2
200N16-1-4,1: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6668
Blank Panel

127016668
VG95211-ML-127016668: RNCC: 2 | RNVC: 2
5.12.7210.8110.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-4249
Angle Bracket

127024249
VG95211-ML-127024249: RNCC: 2 | RNVC: 2
5.12.7210.1040.00: RNCC: 3 | RNVC: 2

6 Apr 1995

Load More Results