What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 137 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 137 of 178

5340-12-320-5703
Loop Clamp

123205703
42075779: RNCC: 3 | RNVC: 2

26 Jan 1990

5340-12-351-5963
Mounting Plate

123515963
228373 3001: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-12-314-6686
Angle Bracket

123146686
512214-0411.000: RNCC: 3 | RNVC: 2
512214-0411: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-389-2585
Butt Hinge Leaf

123892585
9999260-185222.000.0: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-12-157-1172
Dust And Moisture Seal Protective Plug

121571172
700/9/16"-18UNF: RNCC: 3 | RNVC: 2
GPN700,9/16IN-18UNF FORM A: RNCC: 5 | RNVC: 2
20503: RNCC: 5 | RNVC: 2
9-16IN18UNFAGPN700: RNCC: 5 | RNVC: 9
A9-16IN18UNFGPN700: RNCC: 5 | RNVC: 9
AGPN700-9-16IN18UNF: RNCC: 5 | RNVC: 9
700049800: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-1378
Lock-Release Lever

121961378
1241-3017.001: RNCC: 2 | RNVC: 2
1241-3017.001: RNCC: 3 | RNVC: 2
1241-3017-001: RNCC: 5 | RNVC: 2
150457: RNCC: 5 | RNVC: 9

1 Jun 1983

5340-12-181-0496
Plain Solid Disk

121810496
1-212-000-0026: RNCC: 3 | RNVC: 9
0504295: RNCC: 5 | RNVC: 2
504295: RNCC: 5 | RNVC: 9

19 Oct 1979

5340-12-327-3581
Rod End Connector

123273581
85053-10.20.10.0: RNCC: 3 | RNVC: 2
85053-10.20.10.0: RNCC: 5 | RNVC: 9

15 Jan 1992

5340-12-316-5939
Pad Eye

123165939
1000192-01 2 00200.01: RNCC: 2 | RNVC: 2
1000192-01 2 00200.01: RNCC: 3 | RNVC: 2
10003-01 2 00200.01: RNCC: 5 | RNVC: 2
1000192-01 2 00200.01: RNCC: 5 | RNVC: 9
10003-01 2 00200.01: RNCC: 5 | RNVC: 9

26 Jan 1989

5340-12-326-6003
Dust And Moisture Seal Protective Plug

123266003
700/3/8"-24UNF: RNCC: 3 | RNVC: 2
700/3/8IN-24UNF: RNCC: 5 | RNVC: 9
GPN700,3/8"-24UNF: RNCC: 5 | RNVC: 9
GPN700,3/8INCH-24UNF: RNCC: 5 | RNVC: 9
GPN700-A3/8-24UNF: RNCC: 5 | RNVC: 9
GPN700/3/8"-24UNF: RNCC: 5 | RNVC: 9
GPN700/3/8IN-24UNF: RNCC: 5 | RNVC: 9

11 Oct 1991

5340-12-327-0876
Door Button

123270876
DIN83104-1-A4-70: RNCC: 2 | RNVC: 2

28 Nov 1991

5340-12-338-5605
Angle Bracket

123385605
2500253-196730.000.0: RNCC: 2 | RNVC: 2
2500253-196730.000.0: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-12-369-8046
Manual Control Handle

123698046
1530-020600.001.0: RNCC: 3 | RNVC: 2
7073100: RNCC: 5 | RNVC: 2

17 Aug 2006

5340-12-393-5577
Angle Bracket

123935577
4100098-721310.001.0: RNCC: 2 | RNVC: 2
4100098-721310.001.0: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-12-327-5147
Dust And Moisture Seal Protective Plug

123275147
1900508208: RNCC: 3 | RNVC: 2
1 900 508 208: RNCC: 5 | RNVC: 2

29 Jan 1992

5340-12-186-5275
Angle Bracket

121865275
4031590140: RNCC: 3 | RNVC: 2

14 Jan 1981

5340-12-324-7263
Double Angle Bracket

123247263
2500171-412000.03: RNCC: 2 | RNVC: 2
2500171-412000.03: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-12-393-6673
Mounting Bracket

123936673
4100098-722030.003.0: RNCC: 2 | RNVC: 2
4100098-722030.003.0: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-304-1243
Angle Bracket

123041243
5802161-642131.00: RNCC: 2 | RNVC: 2
5802161-642131.00: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-12-349-8203
Dust And Moisture Seal Protective Plug

123498203
51 16 2 313 670: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-301-5782
Retaining Strap

123015782
DIN72571-1X5-ST MIT 8,5MM LOCH: RNCC: 2 | RNVC: 2
DIN72571-1X5-ST MIT 8,5MM LOCH: RNCC: 3 | RNVC: 2
4179470: RNCC: 3 | RNVC: 2
DIN72571-1X5-ST: RNCC: 5 | RNVC: 1
S12B.A39.00.00.003: RNCC: 5 | RNVC: 2

25 Oct 1984

5340-12-701-6719
Angle Bracket

127016719
VG95211-ML-127016719: RNCC: 2 | RNVC: 2
5.12.7211.1210.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-5354
Angle Bracket

127015354
VG95211-ML-127015354: RNCC: 2 | RNVC: 2
5.12.6105.2061.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-310-9157
Resilient Mount

123109157
82600-4602851003: RNCC: 3 | RNVC: 2
TM5.68: RNCC: 3 | RNVC: 9
4602851003: RNCC: 5 | RNVC: 2
7202222522: RNCC: 5 | RNVC: 9

8 Jul 1987

5340-12-323-0456
Access Cover

123230456
1865-010200.04.0: RNCC: 3 | RNVC: 9
1865-010200.04.0: RNCC: 3 | RNVC: 9

18 Oct 1990

5340-12-303-2426
Mending Plate

123032426
P-886758-411: RNCC: 3 | RNVC: 2
P886758-411: RNCC: 5 | RNVC: 2

8 Mar 1985

5340-12-701-3019
Mounting Bracket

127013019
VG95211-ML-127013019: RNCC: 2 | RNVC: 2
5.12.5101.5120.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-9118
Angle Bracket

127019118
R303-6-160: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-166-9947
Butt Hinge Leaf

121669947
23305-312000.54.0: RNCC: 2 | RNVC: 2
D86 707 3002: RNCC: 3 | RNVC: 2
02811414: RNCC: 5 | RNVC: 2
2811414ED7205-31: RNCC: 5 | RNVC: 2
867073002: RNCC: 5 | RNVC: 2
23305-312000-54-0: RNCC: 5 | RNVC: 9
23305-312000.54.0: RNCC: 5 | RNVC: 9
2811414ED7205-31: RNCC: 5 | RNVC: 9
02811414: RNCC: 5 | RNVC: 9

10 Nov 1976

5340-12-197-7093
Loop Clamp

121977093
6-472-0610: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-12-359-9333
Mounting Bracket

123599333
2500261-187070.003.0: RNCC: 2 | RNVC: 2
2500261-187070.003.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-314-4327
Mounting Bracket

123144327
3805464643: RNCC: 3 | RNVC: 2
380 546 46 43: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-352-6413
Elastic Strap

123526413
12910: RNCC: 3 | RNVC: 2

4 Dec 2000

5340-12-195-1248
Resilient Mount

121951248
DIN95363-E10X15-NR55ST: RNCC: 2 | RNVC: 2
1.10.15.3B.55NR/ST: RNCC: 5 | RNVC: 2
81170-10X15-M4X10.NR55.ST: RNCC: 5 | RNVC: 2
81170-10X15-M4X10.NR55.STZN: RNCC: 5 | RNVC: 2
5LV6671.003-20: RNCC: 5 | RNVC: 2
N1051/10/280: RNCC: 5 | RNVC: 2
BB3.40-25N: RNCC: 5 | RNVC: 9
VG95363-E10X15-NR55ST: RNCC: 5 | RNVC: 9
VG95363-E10X15-NR55STZN: RNCC: 5 | RNVC: 9

13 Jan 1983

5340-12-181-7903
Butt Hinge

121817903
WW 311 070 CR: RNCC: 2 | RNVC: 2
WW 311 070 CR: RNCC: 3 | RNVC: 2
WW 311 070 CR: RNCC: 5 | RNVC: 2
WW311070CR: RNCC: 5 | RNVC: 2
WW 311 070 CR: RNCC: 5 | RNVC: 2
WW311070CR: RNCC: 5 | RNVC: 2
WW311070CR: RNCC: 5 | RNVC: 2

17 Dec 1979

5340-12-333-8433
Dust And Moisture Seal Boot

123338433
1150940091: RNCC: 3 | RNVC: 2
115 094 00 91: RNCC: 5 | RNVC: 2
115 094 0091: RNCC: 5 | RNVC: 9

16 Feb 1994

5340-12-333-8337
Access Door

123338337
53.1622.538.00: RNCC: 3 | RNVC: 2

16 Feb 1994

5340-12-353-8456
Mounting Bracket

123538456
A 25110: RNCC: 3 | RNVC: 2

15 May 2001

5340-12-376-9022
Dust And Moisture Seal Protective Cap

123769022
800G3/8: RNCC: 3 | RNVC: 2
300.064.248: RNCC: 5 | RNVC: 2

20 Nov 2008

5340-12-328-2899
Mounting Bracket

123282899
2300232-971005.000.0: RNCC: 2 | RNVC: 2
2300232-971005.000.0: RNCC: 3 | RNVC: 2

5 May 1992

5340-12-302-6148
Headless Straight Rod

123026148
YK03210838: RNCC: 3 | RNVC: 2
03210838: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 21 0838: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-307-3651
Resilient Mount

123073651
60130001-B: RNCC: 3 | RNVC: 2
E1N 2296-21: RNCC: 3 | RNVC: 2
6100129-176: RNCC: 5 | RNVC: 2
FT6100129-176: RNCC: 5 | RNVC: 2
3755121EY3145-04: RNCC: 5 | RNVC: 2
3755121: RNCC: 5 | RNVC: 2
VG95365-B4-NR-ST: RNCC: 5 | RNVC: 9

10 Jun 1986

5340-12-350-5956
Mending Plate

123505956
A-085033-011: RNCC: 3 | RNVC: 2
A085033-011: RNCC: 5 | RNVC: 2

18 Apr 2000

5340-12-132-7605
Loop Clamp

121327605
6.0402.05.0.0506: RNCC: 3 | RNVC: 9
0996 2622: RNCC: 5 | RNVC: 2
6-0402-05-0-0506: RNCC: 5 | RNVC: 9
C5X6N1148: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-141-9374
Resilient Mount

121419374
DIN95368-A1-1-NR45-ST: RNCC: 2 | RNVC: 2
786021WEICH: RNCC: 5 | RNVC: 2
K45WEICH: RNCC: 5 | RNVC: 2
KONUS-LAGER-786021.NR45.ST: RNCC: 5 | RNVC: 2
57860210040: RNCC: 5 | RNVC: 2
786021WEICH: RNCC: 5 | RNVC: 2
VG95368-A1-1-NR45ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-309-1942
Mending Plate

123091942
5800044-1030.02: RNCC: 2 | RNVC: 2
5800044-1030.02: RNCC: 3 | RNVC: 2

22 Dec 1986

5340-12-183-3488
Spring Loaded Cylinder Fastener

121833488
5801441-31160: RNCC: 3 | RNVC: 2
5801441-31160: RNCC: 5 | RNVC: 9

9 Apr 1980

5340-12-137-1049
Butt Hinge

121371049
DIN7954-B40-MS-BK: RNCC: 2 | RNVC: 2
B40DIN7954MS: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-377-9129
Bumper

123779129
375.7870: RNCC: 3 | RNVC: 2
SJ5008, GRAU: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-12-090-7434

5340-12-300-7349
Door Closer

123007349
3097201216: RNCC: 3 | RNVC: 2
9668: RNCC: 5 | RNVC: 2

25 Aug 1984

5340-12-346-4596
Spring Tension Clip

123464596
912003005000: RNCC: 3 | RNVC: 2

28 Jul 1998

5340-12-327-4245
Plug Button

123274245
4615250038: RNCC: 3 | RNVC: 2

21 Jan 1992

5340-12-306-4450
Retaining Strap

123064450
S1301P0S1LIG22: RNCC: 3 | RNVC: 2
S1301P0S1: RNCC: 5 | RNVC: 9

28 Feb 1986

5340-12-321-2343
Mounting Bracket

123212343
05-891: RNCC: 3 | RNVC: 2
05-891: RNCC: 5 | RNVC: 2

20 Apr 1990

5340-12-316-8298
Angle Bracket

123168298
2300279-5000.50: RNCC: 2 | RNVC: 2
2300279-5000.50: RNCC: 3 | RNVC: 2
2300279-5000.50: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-348-1616
Mounting Bracket

123481616
2300262-970400.051.0: RNCC: 2 | RNVC: 2
2300262-970400.051.0: RNCC: 3 | RNVC: 2
1811986: RNCC: 5 | RNVC: 2

27 Apr 1999

5340-12-388-0111
Butt Hinge Leaf

123880111
10124-207010.002.0: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-353-7928
Escutcheon Plate

123537928
92.37.9: RNCC: 3 | RNVC: 2
RM 5: RNCC: 5 | RNVC: 2

10 May 2001

5340-12-344-2375
Access Cover

123442375
2500255-531411.000.0: RNCC: 2 | RNVC: 2
2500255-531411.000.0: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-12-365-3910
Mounting Bracket

123653910
2500267-331111.000.0: RNCC: 2 | RNVC: 2
2500267-331111.000.0: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-324-7127
Nonmetallic Bumper

123247127
40 0166 907: RNCC: 2 | RNVC: 2
40 0166 907: RNCC: 3 | RNVC: 2
40 0166 907: RNCC: 5 | RNVC: 9

19 Mar 1991

5340-12-320-8008
Clamp Bolt Assembly

123208008
8 600 175: RNCC: 3 | RNVC: 2
8 600 175: RNCC: 5 | RNVC: 9
8600175: RNCC: 5 | RNVC: 9

16 Feb 1990

5340-12-300-8416
Catch Strike

123008416
3819190175: RNCC: 3 | RNVC: 2
A 381 919 01 75: RNCC: 5 | RNVC: 9

4 Sep 1984

5340-12-180-9084
Escutcheon Plate

121809084
81626420014: RNCC: 3 | RNVC: 2

11 Oct 1979

5340-12-389-6364
Expansion Shield

123896364
745230: RNCC: 3 | RNVC: 2

3 Aug 2012

5340-12-382-2151
Loop Clamp

123822151
JN0230C28: RNCC: 3 | RNVC: 2

21 May 2010

5340-12-373-6111
Angle Bracket

123736111
8812000040: RNCC: 3 | RNVC: 2

21 Nov 2007

5340-12-168-5704
Pad Eye

121685704
1000025-310000-03: RNCC: 3 | RNVC: 2
1000025-310000.03: RNCC: 3 | RNVC: 2
1000025-310000-03: RNCC: 5 | RNVC: 9
1000025-310000.03: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-701-4516
Mounting Bracket

127014516
VG95211-ML-127014516: RNCC: 2 | RNVC: 2
5.12.5314.0730.08: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-312-6807
Mending Plate

123126807
AS418-33-3: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-12-186-5862
Spring Tension Clip

121865862
C22234-A1000-C148: RNCC: 3 | RNVC: 2
C22234A1000C148: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-12-324-0100
Angle Bracket

123240100
9056475083: RNCC: 3 | RNVC: 2
2666-743-1: RNCC: 5 | RNVC: 2
90564 75083: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-12-186-5581
Access Cover

121865581
3-552422-1: RNCC: 3 | RNVC: 2

14 Jan 1981

5340-12-378-0620
Mechanical Stop

123780620
X 020.087 Z0112: RNCC: 3 | RNVC: 2

10 Mar 2009

5340-12-385-9775
Manual Control Lever

123859775
2500262-323021.000.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-305-0548
Angle Bracket

123050548
A-230329-025: RNCC: 3 | RNVC: 2
A230329-025: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-382-7298
Access Cover

123827298
2058-1061-010: RNCC: 3 | RNVC: 2

2 Aug 2010

5340-12-361-6700
Retaining Bail

123616700
MLG-00-232500: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-317-3218
Mounting Bracket

123173218
4900064-4122.006: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-701-6974
Mounting Bracket

127016974
VG95211-ML-127016974: RNCC: 2 | RNVC: 2
5.12.7225.0040.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-375-6400
Angle Bracket

123756400
5802295-131000: RNCC: 2 | RNVC: 2
5802295-131000: RNCC: 3 | RNVC: 2

19 Jun 2008

5340-12-341-6243
Dust And Moisture Seal Protective Cap

123416243
5.321-406.0: RNCC: 3 | RNVC: 2
5.321-406: RNCC: 5 | RNVC: 9

3 Oct 1996

5340-12-701-4210
Loop Clamp

127014210
VG95211-ML-127014210: RNCC: 2 | RNVC: 2
5.12.5312.1000.13: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6227
Angle Bracket

127016227
VG95211-ML-127016227: RNCC: 2 | RNVC: 2
5.12.7030.1100.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-181-4240
Mounting Bracket

121814240
81517100626: RNCC: 3 | RNVC: 2
81.51710.0626: RNCC: 5 | RNVC: 2
23246-120601-001-0: RNCC: 5 | RNVC: 9
23246-120601.001.0: RNCC: 5 | RNVC: 9

22 Nov 1979

5340-12-302-8953
Butt Hinge Leaf

123028953
P-231968-406: RNCC: 3 | RNVC: 2
P231968-406: RNCC: 5 | RNVC: 2

6 Feb 1985

5340-12-301-2020
Double Angle Bracket

123012020
A-295140-001: RNCC: 3 | RNVC: 2
A295140-001: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-304-4085
Shimmy Damper

123044085
16-2-271-200-A8-B8-400N: RNCC: 3 | RNVC: 2
01600071: RNCC: 5 | RNVC: 2
162271200A81B8400N: RNCC: 5 | RNVC: 2

12 Jul 1985

5340-12-151-7846
Double Angle Bracket

121517846
BD7001G176: RNCC: 3 | RNVC: 2
BD7001G176: RNCC: 3 | RNVC: 9
1292001-000176: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-9812
Pipe Bracket

123029812
2300147-262920.000.0: RNCC: 2 | RNVC: 2
2300147-262920.000.0: RNCC: 3 | RNVC: 2
2300147-262920-000-0: RNCC: 5 | RNVC: 9
2300147-262920.000.0: RNCC: 5 | RNVC: 9

15 Feb 1985

5340-12-359-0679
Double Angle Bracket

123590679
3815283740: RNCC: 3 | RNVC: 2

13 Dec 2002

5340-12-370-4988
Electronic Equipment Hardware Kit

123704988
7803200300AA: RNCC: 3 | RNVC: 2

14 Nov 2006

5340-12-373-6903
Angle Bracket

123736903
5361530840: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-12-346-4582
Loop Clamp

123464582
916016010211: RNCC: 3 | RNVC: 2

28 Jul 1998

5340-12-701-1141
Angle Bracket

127011141
VG95211-ML-127011141: RNCC: 2 | RNVC: 2
4.59.9100.3005.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-9869
Angle Bracket

121969869
A-230129-125: RNCC: 3 | RNVC: 2
A230129-125: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-383-6548
Hydraulic Ram Support

123836548
812.173.7: RNCC: 3 | RNVC: 2

19 Nov 2010

5340-12-377-4819
Mounting Bracket

123774819
8605001.3.550.03: RNCC: 3 | RNVC: 2
8605001355003: RNCC: 5 | RNVC: 2

19 Jan 2009

5340-12-324-3281
Butt Hinge

123243281
4303010028: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-12-372-2098
Manual Control Handle

123722098
8474.1305: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-12-022-9439

5340-12-090-7157

5340-12-090-4199

5340-12-347-4840
Mounting Bracket

123474840
240982: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-12-360-3256
Mounting Bracket

123603256
3514407712: RNCC: 3 | RNVC: 2
3514407712: RNCC: 5 | RNVC: 2

8 May 2003

5340-12-378-0847
Angle Bracket

123780847
5555068: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-319-5769
Butt Hinge Leaf

123195769
4900059-751790.023.0: RNCC: 3 | RNVC: 2
1227980: RNCC: 5 | RNVC: 2

13 Oct 1989

5340-12-347-7965
Dirt And Liquid Deflector

123477965
301 819: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-12-385-4162
Access Cover

123854162
Z=130010X33: RNCC: 3 | RNVC: 2

31 May 2011

5340-12-358-6816
Spacing Threaded Standoff

123586816
2500262-394320.002.0: RNCC: 2 | RNVC: 2
2500262-394320.002.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-329-1256
Handwheel

123291256
2653-330220.00: RNCC: 2 | RNVC: 2
2653-330220.00: RNCC: 3 | RNVC: 2

21 Jul 1992

5340-12-348-0982
Mounting Plate

123480982
58R059-613-3: RNCC: 2 | RNVC: 2
58R059-613-3: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-12-366-9343
Section Block Clamp

123669343
JN0413CCJ52: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-12-094-0944

5340-12-314-9511
Dust And Moisture Seal Protective Cap

123149511
800/1/4"-28UNF: RNCC: 3 | RNVC: 2
GPN800,1/4IN-28UNF FORM A: RNCC: 5 | RNVC: 2
20933: RNCC: 5 | RNVC: 2

31 Aug 1988

5340-12-313-0206
Double Angle Bracket

123130206
P-086149-019: RNCC: 3 | RNVC: 2
P086149-019: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-149-8628
Spring Tension Clip

121498628
2360-020010.12.0: RNCC: 2 | RNVC: 2
2520452111: RNCC: 3 | RNVC: 2
2360-020010-12-0: RNCC: 5 | RNVC: 2
2360-020010.12.0: RNCC: 5 | RNVC: 2
2360-020010.12.0: RNCC: 5 | RNVC: 2
2360-020010.12.0: RNCC: 5 | RNVC: 9
2360-020010-12-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-168-1427
Friction Catch

121681427
6030059/60/4730002/3/4700059: RNCC: 3 | RNVC: 2
44171: RNCC: 5 | RNVC: 2
6030058: RNCC: 5 | RNVC: 2
972720001: RNCC: 5 | RNVC: 2
972720001: RNCC: 5 | RNVC: 9
972720001: RNCC: 5 | RNVC: 9

18 Feb 1977

5340-12-332-4504
Mounting Plate

123324504
5-450-232: RNCC: 3 | RNVC: 2
450 232: RNCC: 5 | RNVC: 9
5-450 232: RNCC: 5 | RNVC: 9
5-450232: RNCC: 5 | RNVC: 9

11 Aug 1993

5340-12-183-6952
Manual Control Handle

121836952
GN310-14-125-A: RNCC: 3 | RNVC: 2
A14X125GN310: RNCC: 5 | RNVC: 2

13 May 1980

5340-12-157-7285
Retaining Strap

121577285
7828-008: RNCC: 3 | RNVC: 9
1092106-3900009: RNCC: 5 | RNVC: 9
7828008: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-368-6258
Webbing Strap

123686258
212B3006M000000-00: RNCC: 3 | RNVC: 2

30 Mar 2006

5340-12-195-5181
Retaining Strap

121955181
23111-5012.18: RNCC: 2 | RNVC: 2
23111-5012.18: RNCC: 3 | RNVC: 2
23111-5012.18: RNCC: 5 | RNVC: 2
23111-5012-18: RNCC: 5 | RNVC: 9
23111-5012.18: RNCC: 5 | RNVC: 9
23111-5012-18: RNCC: 5 | RNVC: 9
23111-5012.18: RNCC: 5 | RNVC: 9
23111-5012.18: RNCC: 5 | RNVC: 9

8 Mar 1983

5340-12-158-1149
Mending Plate

121581149
431271200410: RNCC: 3 | RNVC: 2
5800357-200000-16: RNCC: 5 | RNVC: 9
5800357-200000.16: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-332-9948
Leather Strap

123329948
6099-960: RNCC: 3 | RNVC: 2
6099-840: RNCC: 5 | RNVC: 2
6099-960: RNCC: 5 | RNVC: 2
6099E-840: RNCC: 5 | RNVC: 2

19 Oct 1993

5340-12-318-5867
Access Cover

123185867
2653-090130.00: RNCC: 2 | RNVC: 2
2653-090130.00: RNCC: 3 | RNVC: 2
2653-090130.00: RNCC: 5 | RNVC: 9

31 Jul 1989

5340-12-318-3842
Manual Control Handle

123183842
512214-8405.000: RNCC: 3 | RNVC: 2
512214-8405: RNCC: 5 | RNVC: 2

10 Jul 1989

5340-12-302-5345
Headless Grooved Rod

123025345
5400026-1000-03: RNCC: 2 | RNVC: 2
5400026-1000-03: RNCC: 3 | RNVC: 2
5400026-1000-03: RNCC: 5 | RNVC: 9

10 Jan 1985

5340-12-377-5189
Runner

123775189
8605059.3.040.01: RNCC: 3 | RNVC: 2

21 Jan 2009

5340-12-198-2325
Retaining Strap

121982325
VG95933DR-8-W1-BK: RNCC: 2 | RNVC: 2
2/1G8-8MMN325: RNCC: 3 | RNVC: 2
2-1G8MMN325: RNCC: 5 | RNVC: 2
2/1G8MMN325: RNCC: 5 | RNVC: 2

4 Jan 1984

5340-12-700-9084
Retaining Bail

127009084
VG95211-ML-127009084: RNCC: 2 | RNVC: 2
2.12.7004.0164.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-163-0035
Retaining Strap

121630035
VG95933GR-15-W1-BK: RNCC: 2 | RNVC: 2
2/2D15MMN325: RNCC: 3 | RNVC: 2
MMN325-2-2D15: RNCC: 5 | RNVC: 2
MMN325-2-2D9-15: RNCC: 5 | RNVC: 2
MMN325-2-2D15: RNCC: 5 | RNVC: 2
MMN325-2-2D9-15: RNCC: 5 | RNVC: 2
2-2D15MMN325: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-189-6191
Electrical-Mechanical Equipment Post

121896191
2500075-191000.008.0: RNCC: 2 | RNVC: 2
2500075-191000.008.0: RNCC: 3 | RNVC: 2
2500075-191000-008-0: RNCC: 5 | RNVC: 9
2500075-191000-008-0: RNCC: 5 | RNVC: 9

8 Oct 1981

5340-12-386-3294
Mounting Plate

123863294
2481-393300.015.0: RNCC: 2 | RNVC: 2
2481-393300.015.0: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-190-6691
Access Cover

121906691
ZG8106G023: RNCC: 3 | RNVC: 2
5340121906691: RNCC: 5 | RNVC: 2
ZG 8106 G 023: RNCC: 5 | RNVC: 9
ZG8106G023: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-322-7374
Nonmetallic Bumper

123227374
4604750284: RNCC: 3 | RNVC: 2
721 1 49 094 1: RNCC: 5 | RNVC: 9

18 Sep 1990

5340-12-319-5045
Access Cover

123195045
4900059-751312.005.0: RNCC: 3 | RNVC: 2
1228951: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-314-5225
Support Hook

123145225
CF 324 656 A: RNCC: 2 | RNVC: 2
CF 324 656 A: RNCC: 3 | RNVC: 2
CF 324 656 A: RNCC: 5 | RNVC: 2

15 Jul 1988

5340-12-302-7859
Mending Plate

123027859
CF 491 383 A: RNCC: 3 | RNVC: 2
CF 491 383 A: RNCC: 5 | RNVC: 2
CF 491 383: RNCC: 5 | RNVC: 9
CF 491 383: RNCC: 5 | RNVC: 9

30 Jan 1985

5340-12-352-1347
Mounting Bracket

123521347
2300223-262510.00.0: RNCC: 2 | RNVC: 2
2300223-262510.00.0: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-12-363-1140
Mounting Bracket

123631140
598101-621000.002.0: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-199-4094
Retaining Strap

121994094
52.9794.000.10: RNCC: 3 | RNVC: 2
52.9794.000.10: RNCC: 5 | RNVC: 9

19 Apr 1984

5340-12-387-0293
Mounting Plate

123870293
5802017-719710.00: RNCC: 2 | RNVC: 2
5802017-719710.00: RNCC: 3 | RNVC: 2

27 Oct 2011

5340-12-319-4657
Spring Tension Clip

123194657
2782-365100.002.0: RNCC: 2 | RNVC: 2
2782-365100.002.0: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-313-3692

5340-12-196-9148
Escutcheon Plate

121969148
81626420021: RNCC: 3 | RNVC: 2
81.62642.0021: RNCC: 5 | RNVC: 2

30 Aug 1983

5340-12-362-5327
Mounting Bracket

123625327
4632800286: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-363-1117
Dust And Moisture Seal Protective Plug

123631117
30020293: RNCC: 3 | RNVC: 9

5 May 2004

5340-12-153-1857
Nonmetallic Bumper

121531857
P009279933201000: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-378-6815
Handwheel

123786815
000213: RNCC: 3 | RNVC: 2
4045: RNCC: 5 | RNVC: 2
4045: RNCC: 5 | RNVC: 2

30 Apr 2009

5340-12-380-5463
Butt Hinge Leaf

123805463
7142921: RNCC: 3 | RNVC: 2

6 Nov 2009

5340-12-197-3386
Angle Bracket

121973386
4257500314: RNCC: 3 | RNVC: 2

13 Oct 1983

5340-12-392-8920
Mounting Plate

123928920
2321343000: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-12-315-7407
Resilient Mount

123157407
6202400318: RNCC: 3 | RNVC: 2
620 240 03 18: RNCC: 5 | RNVC: 2

24 Nov 1988

5340-12-340-2444
Mounting Bracket

123402444
463-630735.000: RNCC: 3 | RNVC: 9
9892461: RNCC: 5 | RNVC: 9

19 Mar 1996

5340-12-197-8186
Mending Plate

121978186
2501501: RNCC: 3 | RNVC: 2

24 Nov 1983

5340-12-391-4561
Angle Bracket

123914561
1103686: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-342-0493
Mounting Plate

123420493
87-401.10-00.00-52: RNCC: 3 | RNVC: 2

4 Dec 1996

5340-12-339-6157
Resilient Mount

123396157
102001.NR70.ST: RNCC: 3 | RNVC: 2
786113 HART: RNCC: 3 | RNVC: 2
786113-HART: RNCC: 5 | RNVC: 2

12 Dec 1995

5340-12-360-7662
Mounting Bracket

123607662
D0065980-001: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-300-5360
Mending Plate

123005360
8100073-130.02: RNCC: 2 | RNVC: 2
8100073-130.02: RNCC: 5 | RNVC: 9
61.174.132-13: RNCC: 5 | RNVC: 9

11 Aug 1984

5340-12-700-8542
Loop Clamp

127008542
VG95211-ML-127008542: RNCC: 2 | RNVC: 2
155N1119-616: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6627
Blank Panel

127016627
VG95211-ML-127016627: RNCC: 2 | RNVC: 2
5.12.7210.1351.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-392-6113
Dust And Moisture Seal Protective Cover

123926113
82660005001: RNCC: 3 | RNVC: 2
82.66000-5001: RNCC: 5 | RNVC: 2

21 Jun 2013

5340-12-354-7263
Metallic Bumper

123547263
03.375.49.39.0: RNCC: 3 | RNVC: 2

20 Aug 2001

5340-12-377-2656
Mounting Bracket

123772656
8605001.3.541.03: RNCC: 3 | RNVC: 2
8605001354103: RNCC: 5 | RNVC: 2

22 Dec 2008

5340-12-393-0157
Retaining Strap

123930157
1030105-206300.005.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-335-7798
Butt Hinge Leaf

123357798
2782-360150.005.0: RNCC: 2 | RNVC: 2
2782-360150.005.0: RNCC: 3 | RNVC: 2

15 Sep 1994

5340-12-340-0705
Mounting Bracket

123400705
1216 1416: RNCC: 3 | RNVC: 2
6.232.0.634.006.4: RNCC: 5 | RNVC: 9

23 Feb 1996

5340-12-360-6053
Mounting Bracket

123606053
EFP17009-2: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-12-330-3940
Extension Drawer Slide

123303940
5.043.036.9: RNCC: 3 | RNVC: 2
3106785: RNCC: 5 | RNVC: 2

10 Dec 1992

5340-12-027-7076

5340-12-168-5219
Retaining Strap

121685219
WW410661A: RNCC: 3 | RNVC: 2
WW410661A: RNCC: 5 | RNVC: 2
WW 410 661 A: RNCC: 5 | RNVC: 2
WW410661A: RNCC: 5 | RNVC: 2

18 Mar 1977

5340-12-366-5627
Mounting Bracket

123665627
2 0073-242: RNCC: 3 | RNVC: 2
2 0073-242: RNCC: 5 | RNVC: 2

10 May 2005

5340-12-168-1266
Dust And Moisture Seal Protective Plug

121681266
LN29843M16X1-5: RNCC: 2 | RNVC: 2

18 Feb 1977

5340-12-322-8373
Mounting Plate

123228373
2360-181001.68.0: RNCC: 2 | RNVC: 2
2360-181001.68.0: RNCC: 3 | RNVC: 2
2360-181001.68.0: RNCC: 5 | RNVC: 2

26 Sep 1990

5340-12-321-3173
Nonmetallic Bumper

123213173
6156 001: RNCC: 3 | RNVC: 2
421.582-27.4: RNCC: 5 | RNVC: 2
61561001: RNCC: 5 | RNVC: 2
1561/001: RNCC: 5 | RNVC: 9

4 May 1990

5340-12-313-1896
Rod End Clevis

123131896
P-896407-403: RNCC: 3 | RNVC: 2
P896407-403: RNCC: 5 | RNVC: 2

10 Mar 1988

5340-12-320-7066
Mounting Bracket

123207066
C249-A34-C25: RNCC: 2 | RNVC: 2
C249-A34-C25: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-339-4120
Butt Hinge

123394120
6910.81/45-3-80: RNCC: 3 | RNVC: 2
69.10.81/45-3-80: RNCC: 5 | RNVC: 2

21 Nov 1995

5340-12-354-7698
Flush Lock

123547698
1000-U237/1000-16: RNCC: 3 | RNVC: 2
6.375-103.0: RNCC: 5 | RNVC: 2

23 Aug 2001

5340-12-342-8779
Dust And Moisture Seal Protective Cap

123428779
913018017100: RNCC: 3 | RNVC: 2
A17X9,5N13018: RNCC: 5 | RNVC: 2
N13018-A17X9,5: RNCC: 5 | RNVC: 2

10 Apr 1997

5340-12-349-9438
Mounting Plate

123499438
2500238-110100.003.0: RNCC: 2 | RNVC: 2
2500238-110100.003.0: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-12-320-2192
Electrical-Mechanical Equipment Post

123202192
5802102-201110.05: RNCC: 2 | RNVC: 2
VG95148B19XM8X72,5-ST: RNCC: 2 | RNVC: 2
VG95148B19XM8X72,5-ST: RNCC: 3 | RNVC: 2
5802102-201110.05: RNCC: 5 | RNVC: 9

19 Dec 1989

5340-12-318-0989
Access Cover

123180989
140-133300-001-0: RNCC: 3 | RNVC: 2
57868-625: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-176-2385
Loop Clamp

121762385
PAN4231CHG5927: RNCC: 3 | RNVC: 2

15 Nov 1978

5340-12-370-5070
Electronic Equipment Hardware Kit

123705070
7803203900AA: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-12-358-6224
Section Block Clamp

123586224
3833250231: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-12-701-6803
Angle Bracket

127016803
VG95211-ML-127016803: RNCC: 2 | RNVC: 2
5.12.7213.8060.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-139-3355
Platte

121393355
C20302-A10-C17: RNCC: 3 | RNVC: 2
C20302A10C17: RNCC: 5 | RNVC: 2
TFS70-06046: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-165-0432
Dust And Moisture Seal Protective Cap

121650432
10996678: RNCC: 3 | RNVC: 2
6420-408-029-1: RNCC: 5 | RNVC: 2
E650.002.100.044: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-315-6003
Angle Bracket

123156003
23305-221001.00.0: RNCC: 2 | RNVC: 2
23305-221001.00.0: RNCC: 3 | RNVC: 2

11 Nov 1988

5340-12-168-2768
Loop Clamp

121682768
DIN3016-2-H1-128X9-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-H1-128X9-W1-2: RNCC: 3 | RNVC: 2
SPGU128/9ZY: RNCC: 3 | RNVC: 2
1219000128: RNCC: 5 | RNVC: 2
SPGU128-9ZY: RNCC: 5 | RNVC: 2
DIN3016-H1-128X9-W1-2: RNCC: 5 | RNVC: 9
VG95931-K128X9-W1: RNCC: 5 | RNVC: 9
VG95931K128X9W1: RNCC: 5 | RNVC: 9

4 Mar 1977

5340-12-335-4008
Electronic Equipment Hardware Kit

123354008
8 698 826 301: RNCC: 3 | RNVC: 2

17 Aug 1994

5340-12-389-3732
Retaining Bail

123893732
10222-181720.001.0: RNCC: 2 | RNVC: 2
10222-181720.001.0: RNCC: 3 | RNVC: 2

27 Jun 2012

5340-12-334-4476
Retaining Clip

123344476
8 691 221 108: RNCC: 3 | RNVC: 2
22728 26003: RNCC: 5 | RNVC: 9

10 May 1994

5340-12-321-0539
Plain Solid Disk

123210539
1480500076: RNCC: 3 | RNVC: 2
1 480 500 076: RNCC: 5 | RNVC: 2

21 Mar 1990

5340-12-193-4460
Flare Lock Fastener

121934460
BD8104T019: RNCC: 3 | RNVC: 2
BD 8104 T 019: RNCC: 5 | RNVC: 9
BD8104T019: RNCC: 5 | RNVC: 9
BD8104T019: RNCC: 5 | RNVC: 9

21 Jul 1982

5340-12-312-1367
Angle Bracket

123121367
2300147-400120.000.0: RNCC: 2 | RNVC: 2
2300147-400120.000.0: RNCC: 3 | RNVC: 2

25 Nov 1987

5340-12-703-1085
Pawl Fastener

127031085
VG95211-ML-127031085: RNCC: 2 | RNVC: 2
6.543.115: RNCC: 3 | RNVC: 2
0500801602479: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-197-9946
T Plate

121979946
P-244601-751: RNCC: 3 | RNVC: 2
P244601-751: RNCC: 5 | RNVC: 2

8 Dec 1983

5340-12-167-1033
Loop Clamp

121671033
DIN3016-2-G1-41X15-W5: RNCC: 2 | RNVC: 2
DIN3016-G1-41X15-W5: RNCC: 3 | RNVC: 2
SP41/15SKZ-W5: RNCC: 3 | RNVC: 2
1410700041: RNCC: 5 | RNVC: 2
SP41-15SKZ1-4571: RNCC: 5 | RNVC: 2
SP41/15SKZ-1.4571: RNCC: 5 | RNVC: 2
DIN3016-G1-41X15-W5: RNCC: 5 | RNVC: 9
VG95931-G41X15-W5: RNCC: 5 | RNVC: 9
VG95931G41X15W5: RNCC: 5 | RNVC: 9

23 Nov 1976

5340-12-308-3478
Retaining Strap

123083478
1203 7216: RNCC: 3 | RNVC: 2
12037216EZ0112-90: RNCC: 5 | RNVC: 2
3.0402.01.9.0004: RNCC: 5 | RNVC: 2
1203 7216: RNCC: 5 | RNVC: 9
12037216: RNCC: 5 | RNVC: 9
3.0402.01.9.0004: RNCC: 5 | RNVC: 9
3.0402.01.9.0004: RNCC: 5 | RNVC: 9

1 Oct 1986

5340-12-361-4758
Nonmetallic Bumper

123614758
N 3427: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-094-1045

5340-12-383-7932
Angle Bracket

123837932
601241-206500.03: RNCC: 2 | RNVC: 2
601241-206500.03: RNCC: 3 | RNVC: 2

8 Dec 2010

5340-12-332-9888
Access Cover

123329888
5900046-2400.07: RNCC: 2 | RNVC: 2

19 Oct 1993

5340-12-386-3471
Manual Control Lever

123863471
67-22-032-15-01: RNCC: 3 | RNVC: 2
H05758: RNCC: 5 | RNVC: 2

25 Aug 2011

5340-12-349-7955
Dust And Moisture Seal Protective Cap

123497955
61 21 2 306 488: RNCC: 3 | RNVC: 2

10 Jan 2000

5340-12-309-3095
Staub- Und F Kappe

5340-12-316-4206
Angle Bracket

123164206
51-53180: RNCC: 3 | RNVC: 2

17 Jan 1989

5340-12-701-6973
Mounting Bracket

127016973
VG95211-ML-127016973: RNCC: 2 | RNVC: 2
5.12.7225.0020.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-161-3150
Rigid Caster

121613150
439A 17K125E ZPK: RNCC: 3 | RNVC: 2
439-15-K/125: RNCC: 5 | RNVC: 9
439-15K125: RNCC: 5 | RNVC: 9
439A15K125EZPK: RNCC: 5 | RNVC: 9
DIN8458A3-125X60B1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-7220
Mounting Bracket

123597220
2500261-820140.000.0: RNCC: 2 | RNVC: 2
2500261-820140.000.0: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-702-3703
Mounting Bracket

127023703
VG95211-ML-127023703: RNCC: 2 | RNVC: 2
5.12.1780.1230.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-360-0912
Mounting Bracket

123600912
2500261-180310.003.0: RNCC: 2 | RNVC: 2
2500261-180310.003.0: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-323-9675
Angle Bracket

123239675
1121-21798.100.01: RNCC: 3 | RNVC: 2
1121-21798-100.01: RNCC: 5 | RNVC: 2

11 Jan 1991

5340-12-362-6229
Turnbuckle

123626229
05720-0250: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-390-3278
Retaining Strap

123903278
2300559-060000.026.0: RNCC: 2 | RNVC: 2
2300559-060000.026.0: RNCC: 3 | RNVC: 2

30 Oct 2012

5340-12-332-7877
Rod End Clevis

123327877
DIN71752-G20X40-A3P: RNCC: 2 | RNVC: 2
100200200040-A3P: RNCC: 3 | RNVC: 2
DIN71752-G20X40-A3P: RNCC: 3 | RNVC: 2
TGL 0-71752-20X40-A3P: RNCC: 5 | RNVC: 2
20X40TGL0-71752-VERZINKT: RNCC: 5 | RNVC: 2
DIN71752-G20X40-9SMNPB28K-A3P: RNCC: 5 | RNVC: 2

20 Sep 1993

5340-12-360-7701
Loop Clamp

123607701
DIN3016-D1-28X25-W1-2-CR: RNCC: 2 | RNVC: 2
BRSGU28/25N16016: RNCC: 3 | RNVC: 2
916016018203: RNCC: 5 | RNVC: 2
916016018203: RNCC: 5 | RNVC: 2

8 Jul 2003

5340-12-300-7971
Retaining Strap

123007971
23114-3700.13: RNCC: 2 | RNVC: 2
23114-3700.13: RNCC: 3 | RNVC: 2
23114-3700.13: RNCC: 5 | RNVC: 9
23114-3700-13: RNCC: 5 | RNVC: 9
23114-3700.13: RNCC: 5 | RNVC: 9
23114-3700-13: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-320-5769
Filler Opening Cap

123205769
5 201 003 005: RNCC: 3 | RNVC: 2
K 5 201 003 005: RNCC: 5 | RNVC: 2
16100860105: RNCC: 5 | RNVC: 9

26 Jan 1990

5340-12-310-6946
Loop Clamp

123106946
53,5DIN71555LACK BIS 600 GRAD C: RNCC: 2 | RNVC: 2
53,5DIN71555DBL739830: RNCC: 3 | RNVC: 2
071555053503: RNCC: 5 | RNVC: 2

22 Jun 1987

5340-12-193-8722
Double Angle Bracket

121938722
5548804: RNCC: 3 | RNVC: 2
554.8804: RNCC: 5 | RNVC: 2

8 Sep 1982

5340-12-146-6604
Retaining Strap

121466604
A7WN7855: RNCC: 3 | RNVC: 2
A7WN7855: RNCC: 3 | RNVC: 2
A7WN7855: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-151-1300
Mending Plate

121511300
521D18023: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-358-7964
Block Clamp

123587964
1213 7577: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-320-0960
Double Angle Bracket

123200960
217333-3000: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-305-2981
Metal Runner

123052981
30113-582: RNCC: 3 | RNVC: 2

18 Oct 1985

5340-12-026-7272

5340-12-302-7855
Angle Bracket

123027855
CF 493 362 A: RNCC: 2 | RNVC: 2
CF 493 362 A: RNCC: 3 | RNVC: 2
CF 493 362 A: RNCC: 3 | RNVC: 2
CF 493 362: RNCC: 5 | RNVC: 9
CF 493 362: RNCC: 5 | RNVC: 9

30 Jan 1985

5340-12-336-9799
Leather Strap

123369799
1000173-420210.000.0: RNCC: 2 | RNVC: 2
1000173-420210.000.0: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-12-199-7537
Compression Cup

121997537
0650135000: RNCC: 3 | RNVC: 2
S000650135000000: RNCC: 5 | RNVC: 2

26 May 1984

5340-12-311-1129
Access Cover

123111129
2300074-5891.02: RNCC: 2 | RNVC: 2
2300074-5891.02: RNCC: 3 | RNVC: 2
2300074-5891.02: RNCC: 5 | RNVC: 9

28 Jul 1987

5340-12-195-4332
Nut And Bolt Locking Plate

121954332
98115044: RNCC: 3 | RNVC: 2
98115044: RNCC: 5 | RNVC: 9

24 Feb 1983

5340-12-391-4425
Mounting Plate

123914425
I005759: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-371-7889
Angle Bracket

123717889
7735437: RNCC: 3 | RNVC: 2

16 May 2007

5340-12-190-4860
Detent Plunger

121904860
0612232: RNCC: 3 | RNVC: 2

1 Dec 1981

5340-12-340-2143
Handle Grip

123402143
HR149254019: RNCC: 3 | RNVC: 2
571405277: RNCC: 5 | RNVC: 2

14 Mar 1996

5340-12-025-5869

5340-12-701-3075
Mounting Plate

127013075
VG95211-ML-127013075: RNCC: 2 | RNVC: 2
5.12.5101.6480.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-381-0385
Locking Stay

123810385
5.099-036.0: RNCC: 3 | RNVC: 2

4 Jan 2010

5340-12-197-6744
Mending Plate

121976744
P-296874-461: RNCC: 3 | RNVC: 2
P296874-461: RNCC: 5 | RNVC: 2

14 Nov 1983

5340-12-330-8548
Pawl Fastener

123308548
591 M 082: RNCC: 3 | RNVC: 2
602 P 0323-000-00.3: RNCC: 5 | RNVC: 2

16 Feb 1993

5340-12-149-3842
Spring Tension Clip

121493842
25704-190700.07.0: RNCC: 2 | RNVC: 2
25704-190700.07.0: RNCC: 3 | RNVC: 2
1179-18.00: RNCC: 5 | RNVC: 2
25704-190700-07-0: RNCC: 5 | RNVC: 2
25704-190700-07-0: RNCC: 5 | RNVC: 9
25704-190700.07.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-7213
Helical Compression Spring Retainer

123597213
2500261-184000.017.0: RNCC: 2 | RNVC: 2
2500261-184000.017.0: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-313-0155
Double Angle Bracket

123130155
P-086147-087: RNCC: 3 | RNVC: 2
P086147-087: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-701-3572
Rod End Connector

127013572
VG95211-ML-127013572: RNCC: 2 | RNVC: 2
5.12.5111.5320.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-301-2069
Angle Bracket

123012069
A-295074-001: RNCC: 3 | RNVC: 2
A295074-001: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-384-8944
Retaining Strap

123848944
MMN325-1/2 G8-42-S235JR: RNCC: 3 | RNVC: 2
700325042200: RNCC: 5 | RNVC: 2

7 Apr 2011

5340-12-135-4603
Antipilferage Seal Locking Wire

121354603
DIN1367-0,3X0,3-STZN AUF SPULEN: RNCC: 2 | RNVC: 2
0-9X0-3DIN1367GALZN3AUFPAPPSPULE: RNCC: 5 | RNVC: 2
0,3-0,3DIN1367-STZN AUF SPULEN: RNCC: 5 | RNVC: 2
0-3-0-3DIN1367STZNAUFSPULEN: RNCC: 5 | RNVC: 2
DIN1367-0,3X0,3STZN AUF SPULEN: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-9446
Rod End Clevis

127019446
VG95211-ML-127019446: RNCC: 2 | RNVC: 2
5.12.0605.0502.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-391-4991
Loop Clamp

123914991
DIN3015-LH-2R-16-PP-W5: RNCC: 2 | RNVC: 2

14 Mar 2013

5340-12-183-9334
Dust And Moisture Seal Protective Cap

121839334
2433928720: RNCC: 3 | RNVC: 2
DPXA60: RNCC: 5 | RNVC: 2
5801506-7069-007: RNCC: 5 | RNVC: 2
5801506-7069-007: RNCC: 5 | RNVC: 9
24339 28720: RNCC: 5 | RNVC: 9

3 Jun 1980

5340-12-179-7804
Mending Plate

121797804
3518028008: RNCC: 3 | RNVC: 2
5801507-0130-002: RNCC: 5 | RNVC: 2
5801507-0130-002: RNCC: 5 | RNVC: 9
35180 28008: RNCC: 5 | RNVC: 9

30 Jul 1979

5340-12-199-3108
Angle Bracket

121993108
A-243764-753: RNCC: 3 | RNVC: 2
A243764-753: RNCC: 5 | RNVC: 2

11 Apr 1984

5340-12-368-2514
Flush Lock

123682514
1.13.0500.1: RNCC: 3 | RNVC: 2

17 Jan 2006

5340-12-154-0881
Plain Solid Disk

121540881
H01179: RNCC: 3 | RNVC: 2
09-01-016-05-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-354-9477
Rod End Clevis

123549477
P-876058-003: RNCC: 3 | RNVC: 2
P876058-003: RNCC: 5 | RNVC: 2

10 Sep 2001

5340-12-302-2614
Dust And Moisture Seal Protective Cap

123022614
80002406: RNCC: 3 | RNVC: 2
80002406EES081-13: RNCC: 5 | RNVC: 2

12 Dec 1984

5340-12-306-0702
Mending Plate

123060702
5801984-201000.004.0: RNCC: 2 | RNVC: 2
5801984-201000.004.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-701-6900
Mounting Plate

127016900
VG95211-ML-127016900: RNCC: 2 | RNVC: 2
5.12.7220.2420.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-374-1844
Corrosion Preventive Anode

123741844
9-Z: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-12-166-1078
Loop Clamp

121661078
4-76520: RNCC: 3 | RNVC: 2

31 Jul 1976

5340-12-368-8454
Rim Latch Set

123688454
1030010-180810.000.0: RNCC: 3 | RNVC: 2

27 Apr 2006

5340-12-325-6123
Nut And Bolt Locking Plate

123256123
1410149001: RNCC: 3 | RNVC: 2
1 410 149 001: RNCC: 5 | RNVC: 2
1 410 149 001: RNCC: 5 | RNVC: 2
0009940512: RNCC: 5 | RNVC: 2

21 Jun 1991

5340-12-340-5101
Angle Bracket

123405101
181201701: RNCC: 3 | RNVC: 2
C 18 120 1701: RNCC: 5 | RNVC: 2

24 Apr 1996

5340-12-198-9563
Mending Plate

121989563
CF CKA 002 B: RNCC: 3 | RNVC: 2
CF CKA 002 B: RNCC: 5 | RNVC: 2
CF CKA 002 B: RNCC: 5 | RNVC: 2
CF CKA 002 B: RNCC: 5 | RNVC: 2
CFCKA002B: RNCC: 5 | RNVC: 2

15 Mar 1984

5340-12-392-3342
Angle Bracket

123923342
4100095-982150.005.0: RNCC: 2 | RNVC: 2
4100095-982150.005.0: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-319-0470
Rim Latch

123190470
6500.996.3: RNCC: 3 | RNVC: 2
4358609510: RNCC: 5 | RNVC: 2

1 Sep 1989

5340-12-388-1750
Lock-Release Lever

123881750
1690-492100.005.0: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-12-305-3593
Spring Tension Clip

123053593
CF 494 168 -R: RNCC: 3 | RNVC: 2
CF 494 168 -R: RNCC: 5 | RNVC: 2

25 Oct 1985

5340-12-181-0191
Mounting Bracket

121810191
1-1740-3-4: RNCC: 3 | RNVC: 2
096377: RNCC: 5 | RNVC: 2

17 Oct 1979

5340-12-135-6529

5340-12-135-2654

5340-12-361-7601
Mounting Bracket

123617601
T291M1077102: RNCC: 3 | RNVC: 2

14 Nov 2003

5340-12-370-2898
Dust And Moisture Seal Protective Cap

123702898
Z0033: RNCC: 3 | RNVC: 2

20 Oct 2006

5340-12-372-4869
Flush Lock

123724869
10060045: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-12-379-7331
Retaining Strap

123797331
1545543: RNCC: 3 | RNVC: 2

27 Aug 2009

5340-12-044-0639

5340-12-377-2027
Mending Plate

123772027
41269078: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-12-360-0971
Mounting Plate

123600971
9418810606: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-341-6511
Helical Compression Spring Seat

123416511
03628600: RNCC: 3 | RNVC: 2
03628600.524: RNCC: 5 | RNVC: 2

10 Oct 1996

5340-12-193-3278
Spring Tension Clip

121933278
81626410005: RNCC: 3 | RNVC: 2
81.62641.0005: RNCC: 5 | RNVC: 2

12 Jul 1982

5340-12-195-8449
Resilient Mount

121958449
331231887.NR75.ST: RNCC: 3 | RNVC: 2
331231887: RNCC: 3 | RNVC: 2

25 Apr 1983

5340-12-192-9263
Manual Control Handle

121929263
1267680036: RNCC: 3 | RNVC: 2
12676800367007: RNCC: 5 | RNVC: 2
12676800369051: RNCC: 5 | RNVC: 2

7 Jun 1982

5340-12-301-4814
Mending Plate

123014814
1300062-230000: RNCC: 2 | RNVC: 2
7834680: RNCC: 3 | RNVC: 2
4-7834-680: RNCC: 5 | RNVC: 2
7834-680: RNCC: 5 | RNVC: 2

19 Oct 1984

5340-12-190-6801
Lock-Release Lever

121906801
E4-2017080: RNCC: 3 | RNVC: 2
E4-2017080: RNCC: 5 | RNVC: 9
E4-2017080: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-190-7216
Mounting Bracket

121907216
NO PRIMARY REF 12-190-7216: RNCC: 3 | RNVC: 2
7631 133167: RNCC: 5 | RNVC: 9
7631133167: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-339-5558
Clamping Catch

123395558
602K0152-000-00.3: RNCC: 3 | RNVC: 2
602K0152: RNCC: 5 | RNVC: 2
0905275: RNCC: 5 | RNVC: 2
0905275: RNCC: 5 | RNVC: 9

5 Dec 1995

5340-12-174-6930
Angle Bracket

121746930
23223-261000-01-0: RNCC: 3 | RNVC: 2
23223-261000.01.0: RNCC: 3 | RNVC: 2
23223-261000-01-0: RNCC: 5 | RNVC: 9
23223-261000.01.0: RNCC: 5 | RNVC: 9

25 Jul 1978

5340-12-349-3872
Dust And Moisture Seal Protective Cover

123493872
VG95211-ML-123493872: RNCC: 2 | RNVC: 2
590619-8105.000: RNCC: 3 | RNVC: 2
590619-8105.000: RNCC: 5 | RNVC: 2
590619-8105.000: RNCC: 5 | RNVC: 9

9 Nov 1999

5340-12-337-9513
Webbing Strap

123379513
E36-2-200: RNCC: 3 | RNVC: 2
E 36-2-200: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-190-7175
Angle Bracket

121907175
NO PRIMARY REF 12-190-7175: RNCC: 3 | RNVC: 2
7501 137153: RNCC: 5 | RNVC: 9
7501137153: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-196-6289
Retaining Clip

121966289
232-ID682030-00: RNCC: 3 | RNVC: 2
C22121-Z1000-C59: RNCC: 5 | RNVC: 2
C22121Z1000C59: RNCC: 5 | RNVC: 2

25 Jul 1983

5340-12-166-9582
Mending Plate

121669582
66.3523.130.06-A001: RNCC: 3 | RNVC: 2
66-3523-130-06A001: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-12-300-3647
Plug Button

123003647
PL-AK52889PE181S: RNCC: 3 | RNVC: 2
0009977386: RNCC: 5 | RNVC: 2
PLAK52889: RNCC: 5 | RNVC: 2

27 Jul 1984

5340-12-701-5996
Mounting Bracket

127015996
VG95211-ML-127015996: RNCC: 2 | RNVC: 2
5.12.6501.8140.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-186-6761
Clamping Catch

121866761
2300211-184070.001.0: RNCC: 2 | RNVC: 2
V18L01-1-1AA: RNCC: 3 | RNVC: 2
2300211-184070.001.0: RNCC: 5 | RNVC: 2
814921: RNCC: 5 | RNVC: 2
K12369-49: RNCC: 5 | RNVC: 2

26 Jan 1981

5340-12-365-2539
Access Cover

123652539
2500255-193512.005.0: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-12-341-6396
Access Cover

123416396
7-637-1402: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-12-319-6737
Double Angle Bracket

123196737
2300264-262600.01.0: RNCC: 2 | RNVC: 2
2300264-262600.01.0: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-12-350-5592
Mechanical Stop

123505592
10063-211000.10.1: RNCC: 3 | RNVC: 2
10063-211000.10.1: RNCC: 5 | RNVC: 9

14 Apr 2000

5340-12-385-9530
Access Cover

123859530
2481-395868.000.0: RNCC: 3 | RNVC: 2

25 Jul 2011

5340-12-199-0917
Dust And Moisture Seal Protective Plug

121990917
700M36X1,5: RNCC: 3 | RNVC: 2
GPN700M36X1,5: RNCC: 5 | RNVC: 2
700M36X1,5: RNCC: 5 | RNVC: 2
700M36X1,5: RNCC: 5 | RNVC: 2
700361500: RNCC: 5 | RNVC: 9
GPN700,M36X1,5 FORM A: RNCC: 5 | RNVC: 9
GPN700,M36X1,5F.A.: RNCC: 5 | RNVC: 9
GPN700AM36X1,5: RNCC: 5 | RNVC: 9
700M36X1,5: RNCC: 5 | RNVC: 9

24 Mar 1984

5340-12-374-7363
Quick Release Plunger

123747363
GN614-6-NI: RNCC: 3 | RNVC: 2

12 Mar 2008

5340-12-702-3832
Rod End Connector

127023832
VG95211-ML-127023832: RNCC: 2 | RNVC: 2
5.12.5101.8310.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-333-7269
Pipe Hanger

123337269
1816025200: RNCC: 3 | RNVC: 2
01816025200: RNCC: 5 | RNVC: 2
SPGU6025-200-30SK: RNCC: 5 | RNVC: 2
SPGU6025.200/30SK: RNCC: 5 | RNVC: 2
SPGU6025.200/30SK-W1: RNCC: 5 | RNVC: 2

28 Jan 1994

5340-12-335-2274
Access Cover

123352274
704-122520-000-0: RNCC: 3 | RNVC: 2

28 Jul 1994

5340-12-132-9080
Retaining Strap

121329080
VG95933AR-15-W1-BK: RNCC: 2 | RNVC: 2
1/1D15MMN325: RNCC: 3 | RNVC: 2
MMN325-1-1D15: RNCC: 5 | RNVC: 2
MMN325-1-1D9-15: RNCC: 5 | RNVC: 2
MMN325-1-1D15: RNCC: 5 | RNVC: 2
MMN325-1-1D9-15: RNCC: 5 | RNVC: 2
1-1D15MMN325: RNCC: 5 | RNVC: 2
700325015100: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-186-5073
Resilient Mount

121865073
DIN95363-A25X20-M6X4,5M6X18NR55: RNCC: 2 | RNVC: 2
500027-M6X4,5-M6X18.NR55.ST: RNCC: 5 | RNVC: 2
55-0206-001-01: RNCC: 5 | RNVC: 2
VG95363-A25X20-M6X4,5M6X18NR55ST: RNCC: 5 | RNVC: 9

12 Jan 1981

5340-12-164-6636
Mending Plate

121646636
2360-182260.00.0: RNCC: 2 | RNVC: 2
2360-182260.00.0: RNCC: 3 | RNVC: 2
2360-182260.00.0: RNCC: 5 | RNVC: 2
2360-182260-00-0: RNCC: 5 | RNVC: 2
2360-182260-00-0: RNCC: 5 | RNVC: 2
2360-182260-00-0: RNCC: 5 | RNVC: 9
2360-182260.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-3353
Dust And Moisture Seal Protective Cap

121993353
2000580160: RNCC: 3 | RNVC: 2
0130 6477: RNCC: 5 | RNVC: 2
01306477EY8776-22: RNCC: 5 | RNVC: 2
23310163046: RNCC: 5 | RNVC: 2
2 000 580 127: RNCC: 5 | RNVC: 2
81.26221.0008: RNCC: 5 | RNVC: 2
81262210008: RNCC: 5 | RNVC: 2
2000580127: RNCC: 5 | RNVC: 9

12 Apr 1984

5340-12-168-4688
Bridge Clamp

121684688
5800043-1000.23: RNCC: 2 | RNVC: 2
5800043-1000.23: RNCC: 3 | RNVC: 2
C 7000 141: RNCC: 5 | RNVC: 2
5800043-1000-23: RNCC: 5 | RNVC: 2
4319561: RNCC: 5 | RNVC: 2
0006880013: RNCC: 5 | RNVC: 2
C 7000 141: RNCC: 5 | RNVC: 2
5800043-1000-23: RNCC: 5 | RNVC: 9
5800043-1000.23: RNCC: 5 | RNVC: 9
5800043-1000-23: RNCC: 5 | RNVC: 9

15 Mar 1977

5340-12-325-7493
Mending Plate

123257493
10 0016 749: RNCC: 3 | RNVC: 2
100016749: RNCC: 5 | RNVC: 2
01.48319-00000.28.4: RNCC: 5 | RNVC: 2

4 Jul 1991

5340-12-318-1925
Mounting Bracket

123181925
1000192-05 0 17210: RNCC: 2 | RNVC: 2
1000192-05 0 17210: RNCC: 3 | RNVC: 2
1000192-05 0 17210: RNCC: 5 | RNVC: 9

20 Jun 1989

5340-12-352-9113
Door Handle

123529113
SK796-182232.000.0: RNCC: 3 | RNVC: 2
1580126: RNCC: 5 | RNVC: 2

5 Jan 2001

5340-12-198-0984
Friction Catch

121980984
9112.999.4: RNCC: 3 | RNVC: 2

20 Dec 1983

5340-12-180-7107
Platte

121807107
1246-5.4: RNCC: 2 | RNVC: 2
1246-5.4: RNCC: 3 | RNVC: 2
1246-5-4: RNCC: 5 | RNVC: 2
1246-5-4: RNCC: 5 | RNVC: 9
1246-5.4: RNCC: 5 | RNVC: 9

28 Sep 1979

5340-12-158-8357
Nonmetallic Bumper

121588357
C40165A373B77: RNCC: 3 | RNVC: 2
C40165-A373-B77: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-361-7898
Loop Clamp

123617898
RSGU1.55/15-W1: RNCC: 3 | RNVC: 2

18 Nov 2003

5340-12-700-8866
Loop Clamp

127008866
VG95211-ML-127008866: RNCC: 2 | RNVC: 2
2 OST1 10494-72: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-134-7118
Loop Clamp

121347118
RS1.2X15/20: RNCC: 3 | RNVC: 2
RS1100-2X15-20GALCD12MT: RNCC: 5 | RNVC: 2
RS1100-2X15-20KADMIERT: RNCC: 5 | RNVC: 2
RS1100.2X15/20KADMIERT: RNCC: 5 | RNVC: 2
4217220015: RNCC: 5 | RNVC: 2
4217220015KADMIERT: RNCC: 5 | RNVC: 2
RS1.2X15/20KADMIERT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-367-1143
Verriegelun Buegel

123671143
SK3121-52: RNCC: 3 | RNVC: 2
7785208: RNCC: 5 | RNVC: 2

11 Jul 2005

5340-12-180-5734
Angle Bracket

121805734
C320-A62-C56: RNCC: 2 | RNVC: 2
C320A62C56: RNCC: 3 | RNVC: 2
C320-A62-C56: RNCC: 5 | RNVC: 2
C320A62C56: RNCC: 5 | RNVC: 2
C320-A62-C56: RNCC: 5 | RNVC: 2

19 Sep 1979

5340-12-343-1315
Manual Control Lever

123431315
4100 6558: RNCC: 3 | RNVC: 2
41006558EZ50-3443: RNCC: 5 | RNVC: 2
41006558: RNCC: 5 | RNVC: 2

6 May 1997

5340-12-375-8472
Manual Control Handle

123758472
DIN99-L63-1.4305: RNCC: 2 | RNVC: 2

11 Jul 2008

5340-12-353-7571
Nonmetallic Bumper

123537571
FORM 21055B AN 55SH: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-364-2624
Angle Bracket

123642624
4375412540: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-359-7329
Mounting Bracket

123597329
S281M3019101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-354-1782
Angle Bracket

123541782
03886900: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-339-1388
Headless Straight Rod

123391388
07.41.200.01: RNCC: 3 | RNVC: 2
0009330020: RNCC: 5 | RNVC: 2

16 Oct 1995

5340-12-196-7772
Sliding Door Hanger

121967772
251843336A: RNCC: 3 | RNVC: 2

15 Aug 1983

5340-12-378-4794
Door Handle

123784794
490903: RNCC: 3 | RNVC: 2
490903: RNCC: 5 | RNVC: 2

9 Apr 2009

5340-12-187-5456
Dust And Moisture Seal Protective Plug

121875456
600B505: RNCC: 3 | RNVC: 2
GPN600B505: RNCC: 5 | RNVC: 2
506012: RNCC: 5 | RNVC: 2
600050500: RNCC: 5 | RNVC: 9
B505: RNCC: 5 | RNVC: 9
B505GPN600: RNCC: 5 | RNVC: 9
GPN600,B505: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-379-3680
Mounting Bracket

123793680
0088181: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-12-313-8656
Angle Bracket

123138656
4114320740: RNCC: 3 | RNVC: 2
411 432 07 40: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-360-9333
Mounting Bracket

123609333
12849901: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-316-4709
Mounting Bracket

123164709
54.0026.251.00: RNCC: 3 | RNVC: 2
54002625100: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-138-6062

5340-12-023-1991

5340-12-701-7969
Butt Hinge

127017969
VG95211-ML-127017969: RNCC: 2 | RNVC: 2
5.12.8102.2560.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-309-5231
Angle Bracket

123095231
0241 5910: RNCC: 3 | RNVC: 2
02415910EE0147-01: RNCC: 5 | RNVC: 2
02415910: RNCC: 5 | RNVC: 2

30 Jan 1987

5340-12-165-9023
Butt Hinge Leaf

121659023
23111-9478.00: RNCC: 2 | RNVC: 2
23111-9478.00: RNCC: 3 | RNVC: 2
23111-9478-00: RNCC: 5 | RNVC: 2
23111-9478.00: RNCC: 5 | RNVC: 2
23111-9478-00: RNCC: 5 | RNVC: 9
23111-9478.00: RNCC: 5 | RNVC: 9
23111-9478-00: RNCC: 5 | RNVC: 9
23111-9478.00: RNCC: 5 | RNVC: 9

15 Jul 1976

5340-12-702-2420
Mounting Plate

127022420
VG95211-ML-127022420: RNCC: 2 | RNVC: 2
30.7702.70: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-189-9407
Loop Clamp

121899407
67.3821.003.00A001: RNCC: 3 | RNVC: 2
67.3821.003.00-A001: RNCC: 5 | RNVC: 2
67-3821-003-00A001: RNCC: 5 | RNVC: 2
67.3821.003: RNCC: 5 | RNVC: 2
707601: RNCC: 5 | RNVC: 2
C42334-A284-B3: RNCC: 5 | RNVC: 2
C42334A284B3: RNCC: 5 | RNVC: 2

28 Oct 1981

5340-12-322-5088
Mounting Bracket

123225088
2079-111000.05B: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-373-5735
Dust And Moisture Seal Protective Plug

123735735
KB146S: RNCC: 3 | RNVC: 2
KB146SCHWARZ: RNCC: 5 | RNVC: 2
KB146-SCHWARZ: RNCC: 5 | RNVC: 2

16 Nov 2007

5340-12-171-3401
Nonmetallic Bumper

121713401
81960200170: RNCC: 3 | RNVC: 2

30 Sep 1977

5340-12-359-7987
Rod End Clevis

123597987
81954900063: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-325-6573
Dust And Moisture Seal Protective Plug

123256573
700R1/2": RNCC: 3 | RNVC: 2
1022572P00: RNCC: 5 | RNVC: 2
700G1-2": RNCC: 5 | RNVC: 9
GPN700,R1-2IN: RNCC: 5 | RNVC: 9
GPN700,R1/2": RNCC: 5 | RNVC: 9

26 Jun 1991

5340-12-179-6340
Electrical-Mechanical Equipment Post

121796340
C247-A10-C86: RNCC: 2 | RNVC: 2
C247-A10-C86: RNCC: 3 | RNVC: 2
C247-A10-C86: RNCC: 5 | RNVC: 2
C247A10C86: RNCC: 5 | RNVC: 2
C247A10C86: RNCC: 5 | RNVC: 2

13 Jul 1979

5340-12-196-6582
Detent Plunger

121966582
AFG010036: RNCC: 3 | RNVC: 2
AFG-06-59-00-00-03: RNCC: 5 | RNVC: 2

28 Jul 1983

5340-12-701-2180
Mounting Plate

127012180
VG95211-ML-127012180: RNCC: 2 | RNVC: 2
5.12.0605.0592.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-315-2831
Dust And Moisture Seal Protective Cap

123152831
1900508010: RNCC: 3 | RNVC: 2
1-900-508-010: RNCC: 5 | RNVC: 2

8 Oct 1988

5340-12-317-2371
Mounting Bracket

123172371
5-450-011: RNCC: 3 | RNVC: 2
450 011: RNCC: 5 | RNVC: 9

20 Mar 1989

5340-12-326-6258
Access Hole Frame

123266258
065-028140-00: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-12-701-5133
Angle Bracket

127015133
VG95211-ML-127015133: RNCC: 2 | RNVC: 2
5.12.6100.1003.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-353-9191
Angle Bracket

123539191
2500284-191500.000.0: RNCC: 3 | RNVC: 2

18 May 2001

5340-12-179-4726
Dust And Moisture Seal Protective Plug

121794726
2382-060000.01.0: RNCC: 2 | RNVC: 2
2382-060000.01.0: RNCC: 3 | RNVC: 2
837-2382-060000.01.0-5.5502.5: RNCC: 5 | RNVC: 2
2382-060000.01.0: RNCC: 5 | RNVC: 2
2382-060000-01-0: RNCC: 5 | RNVC: 9
2382-060000.01.0: RNCC: 5 | RNVC: 9

29 Jun 1979

5340-12-323-7534
Retaining Clip

123237534
2500075-068140.000.0: RNCC: 3 | RNVC: 2

13 Dec 1990

5340-12-305-0507
Angle Bracket

123050507
5801759-162000.000: RNCC: 2 | RNVC: 2
5801759-162000.000: RNCC: 3 | RNVC: 2

20 Sep 1985

5340-12-199-3883
Extension Drawer Slide Section

121993883
5801549-21203.005: RNCC: 3 | RNVC: 2
5801549-21203.005: RNCC: 5 | RNVC: 9

19 Apr 1984

5340-12-318-0987
Access Cover

123180987
140-132300-001-0: RNCC: 3 | RNVC: 2
057870-625: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-701-3725
Mounting Plate

127013725
VG95211-ML-127013725: RNCC: 2 | RNVC: 2
5.12.5305.0203.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-337-5543
Loop Clamp

123375543
DIN3016-1-A1-41X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-41X15-W1-2: RNCC: 3 | RNVC: 2
RS1.41/25-W1: RNCC: 3 | RNVC: 2
916016041202: RNCC: 5 | RNVC: 2
N16016-BRS 41/15: RNCC: 5 | RNVC: 2
RS1.41/15: RNCC: 5 | RNVC: 2
RS1100.41/15: RNCC: 5 | RNVC: 2
DIN3016-A1-41X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-A41X15-W1: RNCC: 5 | RNVC: 9

13 Mar 1995

5340-12-164-3645
Retaining Strap

121643645
2360-220024.00.0: RNCC: 2 | RNVC: 2
2360-220024-00-0: RNCC: 5 | RNVC: 2
2360-220024.00.0: RNCC: 5 | RNVC: 2
2360-220024.00.0: RNCC: 5 | RNVC: 2
2360-220024-00-0: RNCC: 5 | RNVC: 9
2360-220024.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-1169
Retaining Strap

127021169
VG95211-ML-127021169: RNCC: 2 | RNVC: 2
30.5314.40: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-153-4397
Loop Clamp

121534397
54-2222-112-00: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-310-8438
Nonmetallic Bumper

123108438
5801339-02017.003: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-12-336-4048
Loop Clamp

123364048
DIN3016-1-D1-29X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-29X12-W1-2: RNCC: 3 | RNVC: 2
RSGU1.29/12-W1: RNCC: 3 | RNVC: 2
RSGU1100.29/12: RNCC: 5 | RNVC: 2
RSGU 1100.29/12: RNCC: 5 | RNVC: 2
RSGU1.29/12: RNCC: 5 | RNVC: 2
Q 314 176 029: RNCC: 5 | RNVC: 2
Q 314 176 029: RNCC: 5 | RNVC: 2
DIN3016-D1-29X12-W1-2: RNCC: 5 | RNVC: 9

11 Nov 1994

5340-12-300-9867
Mending Plate

123009867
5801923-3120.00: RNCC: 2 | RNVC: 2
7802075335: RNCC: 3 | RNVC: 2
78020 75335: RNCC: 5 | RNVC: 9

15 Sep 1984

5340-12-197-7473
Mending Plate

121977473
4095201: RNCC: 3 | RNVC: 2

21 Nov 1983

5340-12-358-7372
Mounting Bracket

123587372
2481-500530.007.0: RNCC: 2 | RNVC: 2
2481-500530.007.0: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-197-5237
Loop Clamp

121975237
Q 5 3192 9001: RNCC: 3 | RNVC: 2
Q531929001: RNCC: 5 | RNVC: 2
Q 5 3192 9001: RNCC: 5 | RNVC: 2
Q531929001: RNCC: 5 | RNVC: 2

28 Oct 1983

5340-12-359-7966
Mounting Bracket

123597966
2500261-820000.018.0: RNCC: 2 | RNVC: 2
2500261-820000.018.0: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-348-2756
Access Cover

123482756
8909990060: RNCC: 3 | RNVC: 2

20 May 1999

5340-12-010-9045

5340-12-342-6123
Mounting Plate

123426123
4205611538: RNCC: 3 | RNVC: 2
4205011538: RNCC: 5 | RNVC: 2

6 Mar 1997

5340-12-337-1167
Key Blank

123371167
4617660106: RNCC: 3 | RNVC: 2

19 Jan 1995

5340-12-393-5994
Mounting Bracket

123935994
10116191: RNCC: 3 | RNVC: 2

26 Sep 2013

5340-12-346-5333
Access Cover

123465333
GR4016E006: RNCC: 3 | RNVC: 9

6 Aug 1998

5340-12-322-8565
Lock-Release Lever

123228565
330706-4002.000: RNCC: 3 | RNVC: 2
330706-4002.000: RNCC: 5 | RNVC: 9

28 Sep 1990

5340-12-326-6225
Clamping Catch

123266225
2300232-976180.001.0: RNCC: 2 | RNVC: 2
1528702: RNCC: 3 | RNVC: 2
2300232-976180.001.0: RNCC: 5 | RNVC: 2
2300232-976180.001.0: RNCC: 5 | RNVC: 2

16 Oct 1991

5340-12-179-7599
Mending Plate

121797599
81974862955: RNCC: 3 | RNVC: 2
81.97486.2955: RNCC: 5 | RNVC: 2

30 Jul 1979

5340-12-185-4399
Metal Runner

121854399
CF307382A: RNCC: 3 | RNVC: 2
CF307382A: RNCC: 5 | RNVC: 2
CF 307 382 A: RNCC: 5 | RNVC: 2
CF 307 382 A: RNCC: 5 | RNVC: 2
CF307382A: RNCC: 5 | RNVC: 2

7 Oct 1980

5340-12-360-2850
Dust And Moisture Seal Protective Plug

123602850
5-063-507.0: RNCC: 3 | RNVC: 2

5 May 2003

5340-12-189-9139
Resilient Mount

121899139
81.43271.0029: RNCC: 3 | RNVC: 2
81432710029: RNCC: 5 | RNVC: 2
5000023394: RNCC: 5 | RNVC: 2
5000281271: RNCC: 5 | RNVC: 2
5000023394: RNCC: 5 | RNVC: 9
5000281271: RNCC: 5 | RNVC: 9

26 Oct 1981

5340-12-151-1301
Mending Plate

121511301
521D18022: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-302-6545
Rim Lock

123026545
6000414: RNCC: 3 | RNVC: 2

21 Jan 1985

5340-12-181-9376
Door Button

121819376
313: RNCC: 3 | RNVC: 2
0007500150: RNCC: 5 | RNVC: 2

28 Dec 1979

5340-12-326-2073
Angle Bracket

123262073
3965462243: RNCC: 3 | RNVC: 2
396 546 22 43: RNCC: 5 | RNVC: 2

16 Aug 1991

5340-12-301-6070
Angle Bracket

123016070
2300107-310100.11: RNCC: 2 | RNVC: 2
2300107-310100.11: RNCC: 3 | RNVC: 2
2300107-310100.11: RNCC: 5 | RNVC: 9
2300107-310100.11: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-179-8093
Retaining Strap

121798093
81974010750: RNCC: 3 | RNVC: 2

1 Aug 1979

5340-12-315-5897
Resilient Mount

123155897
1086410: RNCC: 3 | RNVC: 2
086410: RNCC: 5 | RNVC: 9

10 Nov 1988

5340-12-315-6751
Resilient Mount

123156751
117-15856: RNCC: 3 | RNVC: 2

18 Nov 1988

5340-12-315-1876
Resilient Mount

123151876
6172400518: RNCC: 3 | RNVC: 2
617 240 05 18: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-164-5693

5340-12-198-0434
Angle Bracket

121980434
4023R-512000.01: RNCC: 2 | RNVC: 2
7883134: RNCC: 3 | RNVC: 2
4023R-512000.01: RNCC: 5 | RNVC: 9

14 Dec 1983

5340-12-353-5398
Mounting Bracket

123535398
2995.23.40: RNCC: 3 | RNVC: 2

5 Apr 2001

5340-12-372-0648
Spacing Threaded Standoff

123720648
8404038: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-12-381-9143
Angle Bracket

123819143
000605-203700.01: RNCC: 2 | RNVC: 2
000605-203700.01: RNCC: 3 | RNVC: 2
43659: RNCC: 5 | RNVC: 2

16 Apr 2010

5340-12-091-4484

5340-12-373-6700
Dust And Moisture Seal Boot

123736700
001451: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-12-330-7035
Mending Plate

123307035
0853 1210.010: RNCC: 3 | RNVC: 2
8531210.010: RNCC: 5 | RNVC: 2

28 Jan 1993

5340-12-360-1279
Cushioning Pad

123601279
9418850534: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-357-1598
Spacing Threaded Standoff

123571598
8711590871: RNCC: 3 | RNVC: 2

14 May 2002

5340-12-390-1228
Mounting Bracket

123901228
2300559-184426.000.0: RNCC: 2 | RNVC: 2
2300559-184426.000.0: RNCC: 3 | RNVC: 2

8 Oct 2012

5340-12-188-5083
Electrical-Mechanical Equipment Post

121885083
4312 712 20440: RNCC: 3 | RNVC: 2
431271220440: RNCC: 5 | RNVC: 2
5801685-122000-02: RNCC: 5 | RNVC: 9
5801685-122000.02: RNCC: 5 | RNVC: 9

15 Jul 1981

5340-12-378-1221
Roller Holder

123781221
5400051-322522.00: RNCC: 2 | RNVC: 2
5400051-322522.00: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-12-701-7667
Angle Bracket

127017667
VG95211-ML-127017667: RNCC: 2 | RNVC: 2
5.12.7702.0500.36: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-198-8192
Angle Bracket

121988192
33 286-001: RNCC: 3 | RNVC: 2
33286-001: RNCC: 5 | RNVC: 2
33286-001: RNCC: 5 | RNVC: 2

28 Feb 1984

5340-12-701-1404
Angle Bracket

127011404
VG95211-ML-127011404: RNCC: 2 | RNVC: 2
5.12.0100.6900.14: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-381-9802
Manual Control Lever

123819802
1204109: RNCC: 3 | RNVC: 2
F1.2188-02-20-08.00-00: RNCC: 5 | RNVC: 2

23 Apr 2010

5340-12-319-0999
Angle Bracket

123190999
F01-240000-66-0: RNCC: 3 | RNVC: 2
F01-240000-66-0 F01: RNCC: 5 | RNVC: 2

8 Sep 1989

5340-12-323-5150
Furniture Cup

123235150
793.21: RNCC: 3 | RNVC: 2
793-21: RNCC: 5 | RNVC: 2
91558692: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-321-4584
Angle Bracket

123214584
P-88673-406: RNCC: 3 | RNVC: 2
P886763-406: RNCC: 5 | RNVC: 2

22 May 1990

5340-12-359-8653
Manual Control Lever

123598653
2500261-186650.000.0: RNCC: 2 | RNVC: 2
2500261-186650.000.0: RNCC: 3 | RNVC: 2

17 Mar 2003

5340-12-701-3262
Rod End Connector

127013262
VG95211-ML-127013262: RNCC: 2 | RNVC: 2
5.12.5102.0031.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-323-1262
Pipe Bracket

123231262
140-116000-000-0: RNCC: 3 | RNVC: 2

25 Oct 1990

5340-12-320-8562
Dust And Moisture Seal Protective Cap

123208562
2300269-180814.000.0: RNCC: 2 | RNVC: 2
790-17.20.000-25: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-12-320-8116
Dust And Moisture Seal Protective Plug

123208116
700/5/8"-18UNF: RNCC: 3 | RNVC: 2
700/5/8JN-18UNF: RNCC: 5 | RNVC: 9
GPN700-5/8-18UNF: RNCC: 5 | RNVC: 9
GPN700/5/8JN-18UNF: RNCC: 5 | RNVC: 9

19 Feb 1990

5340-12-335-8473
Resilient Mount

123358473
GS-3-22/35 DF K 01: RNCC: 3 | RNVC: 2
0002370526: RNCC: 5 | RNVC: 2

22 Sep 1994

5340-12-195-7894
Angle Bracket

121957894
P-230129-233: RNCC: 3 | RNVC: 2
P230129-233: RNCC: 5 | RNVC: 2

18 Apr 1983

5340-12-306-5386
Lock-Release Lever

123065386
42356-002: RNCC: 3 | RNVC: 2
42 356-002: RNCC: 5 | RNVC: 9

7 Mar 1986

5340-12-180-9073
Handle Grip

121809073
4-0224: RNCC: 3 | RNVC: 2
81.62340-0058: RNCC: 5 | RNVC: 2
81623400058: RNCC: 5 | RNVC: 2
40224: RNCC: 5 | RNVC: 2

11 Oct 1979

5340-12-173-9995
Double Angle Bracket

121739995
8452864: RNCC: 3 | RNVC: 2
1009-800: RNCC: 5 | RNVC: 2
1009800: RNCC: 5 | RNVC: 2

29 May 1978

5340-12-174-2605
Angle Bracket

121742605
7882318: RNCC: 3 | RNVC: 2
7882-318: RNCC: 5 | RNVC: 2
1000025-531000-04: RNCC: 5 | RNVC: 9
1000025-531000.04: RNCC: 5 | RNVC: 9

19 Jun 1978

5340-12-125-1187
Rod End Clevis

121251187
8408856: RNCC: 3 | RNVC: 2
1412-031: RNCC: 5 | RNVC: 2
1412031: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-186-6534
Retaining Clip

121866534
C22156-A1000-C17: RNCC: 3 | RNVC: 2
C22156A1000C17: RNCC: 5 | RNVC: 9

23 Jan 1981

5340-12-194-7687
Hand Crank

121947687
VG85086-A-150X12-AM: RNCC: 2 | RNVC: 2
VG85086-A-150X12-AM: RNCC: 3 | RNVC: 2
VG85086-A-150X12-AM: RNCC: 3 | RNVC: 2
VG85086-A-150X12-AM: RNCC: 3 | RNVC: 9
A150X12VG85086-G-CUSN5ZNPB: RNCC: 5 | RNVC: 9
A150X12VG85086-RG5: RNCC: 5 | RNVC: 9
A150X12VG85086RG5: RNCC: 5 | RNVC: 9

6 Dec 1982

5340-12-306-6610
Angle Bracket

123066610
704-152300-903-0: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-12-308-0172
Retaining Strap

123080172
DIN72572-12-ST-ZN: RNCC: 2 | RNVC: 2
DIN72572-12-ST-ZN: RNCC: 3 | RNVC: 2
12DIN72572-ST: RNCC: 5 | RNVC: 2
12DIN72572ST: RNCC: 5 | RNVC: 2
DIN72572-12-ST: RNCC: 5 | RNVC: 9
DIN72572-12-ST: RNCC: 5 | RNVC: 9

20 Aug 1986

5340-12-370-7567
Mounting Plate

123707567
492-190113.001: RNCC: 3 | RNVC: 2

18 Dec 2006

5340-12-303-2624
Angle Bracket

123032624
P-886763-004: RNCC: 3 | RNVC: 2
P886763-004: RNCC: 5 | RNVC: 2

11 Mar 1985

5340-12-333-8844
Angle Bracket

123338844
405-1-15: RNCC: 3 | RNVC: 2
405-1.15: RNCC: 5 | RNVC: 2

21 Feb 1994

5340-12-701-4529
Loop Clamp

127014529
VG95211-ML-127014529: RNCC: 2 | RNVC: 2
5.12.5314.1000.30: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-173-0317
Mending Plate

121730317
2360-261422.00.0: RNCC: 2 | RNVC: 2
2360-261422.00.0: RNCC: 3 | RNVC: 2
2360-261422-00-0: RNCC: 5 | RNVC: 2
2360-261422.00.0: RNCC: 5 | RNVC: 2
2360-261422-00-0: RNCC: 5 | RNVC: 9
2360-261422.00.0: RNCC: 5 | RNVC: 9

15 Mar 1978

5340-12-338-8023
Mending Plate

123388023
6700017-204800.03: RNCC: 2 | RNVC: 2
6700017-204800.03: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-701-2533
Angle Bracket

127012533
VG95211-ML-127012533: RNCC: 2 | RNVC: 2
5.12.4002.0223.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-320-5337
Loop Clamp

123205337
DIN3015-LA-K-3R-22-PP-W1: RNCC: 2 | RNVC: 2
RAPR3-322: RNCC: 3 | RNVC: 2
HRL3A22PP STMBLL: RNCC: 3 | RNVC: 2
SP322PP-DP-AS: RNCC: 3 | RNVC: 2
DIN3015-LA3R-22PP-W1-K: RNCC: 5 | RNVC: 2
RAPR3-322: RNCC: 5 | RNVC: 2
1502775: RNCC: 5 | RNVC: 2
330322: RNCC: 5 | RNVC: 2

23 Jan 1990

5340-12-701-1924
Strap Hinge

127011924
VG95211-ML-127011924: RNCC: 2 | RNVC: 2
5.12.0430.9100.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-352-5898
Dust And Moisture Seal Protective Cap

123525898
GN806-24-A: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-12-198-7444
Loop Clamp

121987444
4507-0.24W: RNCC: 3 | RNVC: 2

22 Feb 1984

5340-12-197-6754
Angle Bracket

121976754
P-296873-409: RNCC: 3 | RNVC: 2
P296873-409: RNCC: 5 | RNVC: 2

14 Nov 1983

5340-12-701-6044
Mounting Bracket

127016044
VG95211-ML-127016044: RNCC: 2 | RNVC: 2
5.12.6602.1050.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-5608
Mounting Bracket

123215608
P-888521-408: RNCC: 3 | RNVC: 2
P888521-408: RNCC: 5 | RNVC: 2

1 Jun 1990

5340-12-145-6187
Webbing Strap

121456187
23176-262150.00.0: RNCC: 2 | RNVC: 2
82300-23176-262150.00.0: RNCC: 3 | RNVC: 2
23176-262150.00.0: RNCC: 3 | RNVC: 2
23176-262150-00-0: RNCC: 5 | RNVC: 2
23176-262150-00-0: RNCC: 5 | RNVC: 9
23176-262150.00.0: RNCC: 5 | RNVC: 9
82300-C55X20-NBR-ST-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-350-8577
Angle Bracket

123508577
J92228308-001: RNCC: 3 | RNVC: 2

30 May 2000

5340-12-365-1310
Mounting Bracket

123651310
009-078.149-002: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-12-198-0295
Loop Clamp

121980295
H14P: RNCC: 3 | RNVC: 2
5800583-096190.074: RNCC: 5 | RNVC: 2
C47195-Z13-C32: RNCC: 5 | RNVC: 2
211-60149: RNCC: 5 | RNVC: 2
5800583-096190.074: RNCC: 5 | RNVC: 9
203014102: RNCC: 5 | RNVC: 9

13 Dec 1983

5340-12-333-2237
Multiple Angle Bracket

123332237
U100-3442-002: RNCC: 2 | RNVC: 2
U100-3442-002: RNCC: 3 | RNVC: 2

11 Nov 1993

5340-12-346-5820
Access Cover

123465820
5052-0901009: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-12-307-3730
Angle Bracket

123073730
C20326-A70-C536: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-12-171-5053
Resilient Mount

121715053
DIN95363-D10X10-NR65ST: RNCC: 2 | RNVC: 2
1.10.10.1A.65NR/ST: RNCC: 5 | RNVC: 2
505001-M4X10.NR65.ST: RNCC: 5 | RNVC: 2
BB2.20-65SHORE: RNCC: 5 | RNVC: 9
VG95363-D10X10-M4X10-NR65ST: RNCC: 5 | RNVC: 9
VG95363-D10X10-NR65ST: RNCC: 5 | RNVC: 9

20 Oct 1977

5340-12-317-7445
Angle Bracket

123177445
P-230234-017: RNCC: 3 | RNVC: 2
P230234-017: RNCC: 5 | RNVC: 2

8 May 1989

5340-12-197-7002
Retaining Strap

121977002
A-296811-003: RNCC: 3 | RNVC: 2
A296811-003: RNCC: 5 | RNVC: 2

15 Nov 1983

5340-12-152-2059
Retaining Strap

121522059
10300012: RNCC: 3 | RNVC: 2
100278-26000-09-0: RNCC: 5 | RNVC: 2
8.743.300.018: RNCC: 5 | RNVC: 2
2490177: RNCC: 5 | RNVC: 2
N5-70-4-2: RNCC: 5 | RNVC: 2
N5.70-4-2: RNCC: 5 | RNVC: 2
N5.70-4-2-ST: RNCC: 5 | RNVC: 2
909620101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-3941
Angle Bracket

121963941
A-920220-001: RNCC: 3 | RNVC: 2
A920220-001: RNCC: 5 | RNVC: 2

4 Jul 1983

5340-12-344-3995
Mounting Bracket

123443995
P-296883-199: RNCC: 3 | RNVC: 2
P296883-199: RNCC: 5 | RNVC: 2

23 Oct 1997

5340-12-330-1880
Nonmetallic Bumper

123301880
009-078.100-000W44-3: RNCC: 3 | RNVC: 2

12 Nov 1992

5340-12-392-6524
Loop Clamp

123926524
DIN3016-1-D1-16X20-W5-NBR: RNCC: 2 | RNVC: 2

26 Jun 2013

5340-12-703-2102
Mounting Bracket

127032102
VG95211-ML-127032102: RNCC: 2 | RNVC: 2
5.12.7701.2960.00: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-311-2500
Angle Bracket

123112500
P-244512-756: RNCC: 3 | RNVC: 2
P244512-756: RNCC: 5 | RNVC: 2

10 Aug 1987

5340-12-159-3796
Retaining Clip

121593796
030765: RNCC: 3 | RNVC: 2
780-1-94-01-00-0-0-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-191-6035
Escutcheon Plate

121916035
8-2802-10: RNCC: 2 | RNVC: 2
8-2802.10: RNCC: 2 | RNVC: 2
8-2802.10: RNCC: 3 | RNVC: 2
8-2802-10: RNCC: 5 | RNVC: 9
8-2802.10: RNCC: 5 | RNVC: 9

15 Feb 1982

5340-12-164-7743
Dust And Moisture Seal Protective Plug

121647743
11-01866-4-4: RNCC: 3 | RNVC: 2
110186600: RNCC: 5 | RNVC: 2
2608-310: RNCC: 5 | RNVC: 2
2608310: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-338-9270
Webbing Strap

123389270
708-232200-000-0: RNCC: 2 | RNVC: 2
708-232200-000-0: RNCC: 3 | RNVC: 2
708 232200-000-0: RNCC: 5 | RNVC: 2

11 Sep 1995

5340-12-319-7683
Nonmetallic Bumper

123197683
7633 040 145: RNCC: 3 | RNVC: 2
7633040145: RNCC: 5 | RNVC: 2
7633 040 145: RNCC: 5 | RNVC: 9

2 Nov 1989

5340-12-362-7657
Nonmetallic Bumper

123627657
S880M00X1007: RNCC: 3 | RNVC: 2

30 Mar 2004

5340-12-360-6978
Strap Hinge

123606978
T991M5006134: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-164-2472
Dust And Moisture Seal Protective Cap

121642472
344011213: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-357-1498
Swivel Caster

123571498
0002540017: RNCC: 3 | RNVC: 2

13 May 2002

5340-12-354-8042
Loop Clamp

123548042
MBT20S: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-385-4033
Access Cover

123854033
5550140333: RNCC: 3 | RNVC: 2

31 May 2011

5340-12-368-6893
Spring Tension Clip

123686893
4618110046: RNCC: 3 | RNVC: 2
461 811 00 46: RNCC: 5 | RNVC: 2

6 Apr 2006

5340-12-379-7528
Loop Holder

123797528
8111110075: RNCC: 3 | RNVC: 2

31 Aug 2009

5340-12-305-5515
Mending Plate

123055515
54.0042.128.00: RNCC: 3 | RNVC: 2

21 Nov 1985

5340-12-344-4196
Mending Plate

123444196
111G08014: RNCC: 3 | RNVC: 2
111 G08 014: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-323-9647
Angle Bracket

123239647
2300074-991200.09: RNCC: 2 | RNVC: 2
2300074-991200.09: RNCC: 5 | RNVC: 2
2300074-991200.09: RNCC: 5 | RNVC: 9

11 Jan 1991

5340-12-343-8901
Access Cover

123438901
160-25541-37: RNCC: 3 | RNVC: 2
160-25541-37: RNCC: 5 | RNVC: 9

11 Aug 1997

5340-12-328-4632
Webbing Strap

123284632
2300354-949900.002: RNCC: 2 | RNVC: 2
70701-140059-99: RNCC: 5 | RNVC: 2
70701-140059-99: RNCC: 5 | RNVC: 9

21 May 1992

5340-12-358-0338
Mending Plate

123580338
2800-194440.002.0: RNCC: 2 | RNVC: 2
2800-194440.002.0: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-12-392-0036
Loop Clamp

123920036
DIN3016-1-D1-27X20-W5-CR: RNCC: 2 | RNVC: 2

25 Apr 2013

5340-12-317-7670
Double Angle Bracket

123177670
P-297201-481: RNCC: 3 | RNVC: 2
P297201-481: RNCC: 5 | RNVC: 2

11 May 1989

5340-12-332-7465
Loop Clamp

123327465
211.03.18.002: RNCC: 3 | RNVC: 2
211-03-18-002-2: RNCC: 5 | RNVC: 2
211-03-18-002-2: RNCC: 5 | RNVC: 2
211.03.18.002: RNCC: 5 | RNVC: 2

14 Sep 1993

5340-12-194-3844
Bridge Clamp

121943844
A-616839-001: RNCC: 3 | RNVC: 2
A616839-001: RNCC: 5 | RNVC: 2

28 Oct 1982

5340-12-329-8689
Butt Hinge Leaf

123298689
VG95211-ML-123298689: RNCC: 2 | RNVC: 2
65207-09001Y109: RNCC: 3 | RNVC: 2
65207-09001Y109: RNCC: 5 | RNVC: 2

8 Oct 1992

5340-12-169-2138
Friction Catch

121692138
NO PRIMARY REF 12-169-2138: RNCC: 3 | RNVC: 2
KUGELSCHNAPPSCHL0SZMS2 1-2: RNCC: 5 | RNVC: 9

22 Apr 1977

5340-12-338-0611
Door Handle

123380611
01.30225-01087.00.4: RNCC: 3 | RNVC: 2
01.30225-01080.12.4: RNCC: 5 | RNVC: 2

17 May 1995

5340-12-700-9224
Loop Clamp

127009224
VG95211-ML-127009224: RNCC: 2 | RNVC: 2
200N-140: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-137-5149
Expansion Shield

121375149
N9/35: RNCC: 3 | RNVC: 2
011: RNCC: 5 | RNVC: 2
N9-35: RNCC: 5 | RNVC: 2
N9X35: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-186-1801
Retaining Strap

121861801
512206-0011-000: RNCC: 3 | RNVC: 2
512206-0011.000: RNCC: 3 | RNVC: 2
512206-0011: RNCC: 5 | RNVC: 2

5 Dec 1980

5340-12-168-5679
Nut And Bolt Locking Plate

121685679
1000025-260000-23: RNCC: 3 | RNVC: 2
1000025-260000.23: RNCC: 3 | RNVC: 2
1000025-260000.23: RNCC: 5 | RNVC: 9
1000025-260000-23: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-316-6382
Mounting Plate

123166382
51125400183: RNCC: 3 | RNVC: 2
51125400183: RNCC: 3 | RNVC: 2
51.12540-0183: RNCC: 5 | RNVC: 2
51.12540-0183: RNCC: 5 | RNVC: 2

30 Jan 1989

5340-12-040-6534

5340-12-365-6044
Mounting Bracket

123656044
9436891514: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-348-9830
Spacing Threaded Standoff

123489830
526525-99: RNCC: 3 | RNVC: 2

9 Sep 1999

Load More Results