What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 133 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 133 of 178

5340-12-389-1646
Loop Clamp

123891646
DIN3016-1-D1-21X15-W1-2-NBR: RNCC: 2 | RNVC: 2

31 May 2012

5340-12-702-4750
Lock-Release Lever

127024750
VG95211-ML-127024750: RNCC: 2 | RNVC: 2
5.51.0605.0120.91: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-198-4182
Mending Plate

121984182
H3-771436-1-6: RNCC: 3 | RNVC: 2
H3-771436-1-6: RNCC: 5 | RNVC: 9
H3-771436-1-6: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-327-4224
Retaining Strap

123274224
DIN3016-1-F1-15X12-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-15X12-W5: RNCC: 3 | RNVC: 2
RSGU2.15/12-W5: RNCC: 3 | RNVC: 2
RSGU2.15/12W4: RNCC: 5 | RNVC: 9
DIN3016-F1-15X12-W5: RNCC: 5 | RNVC: 9

21 Jan 1992

5340-12-702-5578
Mounting Plate

127025578
VG95211-ML-127025578: RNCC: 2 | RNVC: 2
5.51.7240.0430.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-343-0179
Manual Control Handle

123430179
5004-046: RNCC: 3 | RNVC: 2

22 Apr 1997

5340-12-361-0332
Angle Bracket

123610332
J28630104-003: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-196-8847
Detent Plunger

121968847
02010-08: RNCC: 3 | RNVC: 2
RBN-DIN6321-16X5: RNCC: 3 | RNVC: 2
0203D101544/1-6: RNCC: 5 | RNVC: 2
201-08: RNCC: 5 | RNVC: 9
NLM201-08: RNCC: 5 | RNVC: 9
NLM2010-08: RNCC: 5 | RNVC: 9

29 Aug 1983

5340-12-322-0903
Angle Bracket

123220903
4000000-01312: RNCC: 3 | RNVC: 2

24 Jul 1990

5340-12-168-2764
Loop Clamp

121682764
DIN3016-G1-115X12-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-115X12-W1-2: RNCC: 3 | RNVC: 2
SP115/12SKZ: RNCC: 3 | RNVC: 2
1310005115: RNCC: 5 | RNVC: 2
SP115-12ZY: RNCC: 5 | RNVC: 2
VG95931-G115X12-W1: RNCC: 5 | RNVC: 9
VG95931G115X12W1: RNCC: 5 | RNVC: 9

4 Mar 1977

5340-12-197-9936
Retaining Band

121979936
A-245460-004: RNCC: 3 | RNVC: 2
A245460-004: RNCC: 5 | RNVC: 2

8 Dec 1983

5340-12-701-3294
Rod End Connector

127013294
VG95211-ML-127013294: RNCC: 2 | RNVC: 2
5.12.5104.0080.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-308-2917
Catch Strike

123082917
P-875517-401: RNCC: 3 | RNVC: 2
P875517-401: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-172-9440
Retaining Strap

121729440
88974010049: RNCC: 3 | RNVC: 2
23230-144600-003-0: RNCC: 5 | RNVC: 9
23230-144600.003.0: RNCC: 5 | RNVC: 9

6 Mar 1978

5340-12-188-9164
Helical Compression Spring Seat

121889164
5801433-060000.02.0: RNCC: 3 | RNVC: 2
5801433-060000-02-0: RNCC: 5 | RNVC: 2
5801433-060000-02-0: RNCC: 5 | RNVC: 9
5801433-060000.02.0: RNCC: 5 | RNVC: 9

10 Aug 1981

5340-12-354-5075
Snap-In Threaded Standoff

123545075
519-120204.01.0: RNCC: 2 | RNVC: 2
519-120204.01.0: RNCC: 3 | RNVC: 2

23 Jul 2001

5340-12-186-6960
Support Hook

121866960
25704-192513.05.0: RNCC: 2 | RNVC: 2
25704-192513.05.0: RNCC: 3 | RNVC: 2
25704-192513-05-0: RNCC: 5 | RNVC: 2
25704-192513.05.0: RNCC: 5 | RNVC: 9
25704-192513-05-0: RNCC: 5 | RNVC: 9

28 Jan 1981

5340-12-172-8282
Butt Hinge Leaf

121728282
2382-023300.03.0: RNCC: 2 | RNVC: 2
4592038221: RNCC: 3 | RNVC: 2
2382-023300.03.0: RNCC: 5 | RNVC: 2
2382-023300.03.0: RNCC: 5 | RNVC: 2
2382-023300-03-0: RNCC: 5 | RNVC: 2
2382-023300-03-0: RNCC: 5 | RNVC: 9
2382-023300.03.0: RNCC: 5 | RNVC: 9

27 Feb 1978

5340-12-371-4471
Dust And Moisture Seal Protective Cap

123714471
86327: RNCC: 3 | RNVC: 2

30 Mar 2007

5340-12-326-9315
Angle Bracket

123269315
073-469000-902-0: RNCC: 2 | RNVC: 2
073-469000-902-0: RNCC: 3 | RNVC: 2

12 Nov 1991

5340-12-353-9299
Mounting Bracket

123539299
16001400: RNCC: 3 | RNVC: 2

18 May 2001

5340-12-314-4298
Mending Plate

123144298
027072558: RNCC: 3 | RNVC: 2

6 Jul 1988

5340-12-193-8728
Angle Bracket

121938728
5545292: RNCC: 3 | RNVC: 2
554.5292: RNCC: 5 | RNVC: 2

8 Sep 1982

5340-12-325-7837
Plug Button

123257837
3575420090: RNCC: 3 | RNVC: 2

9 Jul 1991

5340-12-323-1834
Mending Plate

123231834
42203320: RNCC: 3 | RNVC: 2
42203320EE5048-75: RNCC: 5 | RNVC: 2

30 Oct 1990

5340-12-187-8572
Spring Tension Clip

121878572
1010000003: RNCC: 3 | RNVC: 2
101000000003/002: RNCC: 3 | RNVC: 2
1010000003: RNCC: 3 | RNVC: 2
17142080: RNCC: 5 | RNVC: 2
3ESN10: RNCC: 5 | RNVC: 2
3SXN10: RNCC: 5 | RNVC: 2
FEP-1407-SC/044: RNCC: 5 | RNVC: 2
3MBO10: RNCC: 5 | RNVC: 2
3MBO10 PHOSPH.: RNCC: 5 | RNVC: 2
3MBO10PHOSPHATIERT: RNCC: 5 | RNVC: 2

13 May 1981

5340-12-316-0050
Retaining Strap

123160050
2500179-198700.001.0: RNCC: 2 | RNVC: 2
2500179-198700.001.0: RNCC: 3 | RNVC: 2

14 Dec 1988

5340-12-193-2971
Pipe Bracket

121932971
571-039.1C.00.09.1: RNCC: 3 | RNVC: 2
571.039.15.00.09.1: RNCC: 5 | RNVC: 2
571-039-15-00-09-1: RNCC: 5 | RNVC: 9
571.039.15.00.09.1: RNCC: 5 | RNVC: 9

8 Jul 1982

5340-12-355-7442
Mechanical Stop

123557442
P-876413-005: RNCC: 3 | RNVC: 2
P876413-005: RNCC: 5 | RNVC: 2

12 Dec 2001

5340-12-371-4404
Mending Plate

123714404
2500278-196400.001.0: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-12-312-3130
Retaining Strap

123123130
VG95933ER-18-CUZN37F29: RNCC: 2 | RNVC: 2
1/2D18MMN325-CUZN37F29: RNCC: 3 | RNVC: 2

15 Dec 1987

5340-12-702-4234
Angle Bracket

127024234
VG95211-ML-127024234: RNCC: 2 | RNVC: 2
5.12.7206.1720.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-322-7568
Metallic Bumper

123227568
5200.230.091.000: RNCC: 3 | RNVC: 9
192-3-000143: RNCC: 5 | RNVC: 2
5200.230.091.000.3: RNCC: 5 | RNVC: 9
52002300910003: RNCC: 5 | RNVC: 9

19 Sep 1990

5340-12-358-1597
Angle Bracket

123581597
2300471-209200.02.0: RNCC: 2 | RNVC: 2
2300471-209200.02.0: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-12-349-4046
Mending Plate

123494046
564.F90.352.0: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-12-316-8702
Double Angle Bracket

123168702
22014.0.12.320.00: RNCC: 2 | RNVC: 2
22014.0.12.320.00: RNCC: 3 | RNVC: 2

20 Feb 1989

5340-12-346-7498
Catch Strike

123467498
E2.40.00.08/5: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-325-3488
Electrical-Mechanical Equipment Post

123253488
12728-02: RNCC: 3 | RNVC: 2

28 May 1991

5340-12-183-1116
Loop Clamp

121831116
159-040: RNCC: 3 | RNVC: 2
0037747: RNCC: 5 | RNVC: 9

20 Mar 1980

5340-12-370-2353
Dust And Moisture Seal Protective Cap

123702353
E32285-00: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-12-378-0025
Loop Clamp

123780025
17316492: RNCC: 3 | RNVC: 2
10-M8-17316492EY11-0760: RNCC: 5 | RNVC: 2

4 Mar 2009

5340-12-343-2955
Butt Hinge

123432955
2500166-040000.02: RNCC: 2 | RNVC: 2
2500166-040000.02: RNCC: 3 | RNVC: 2

3 Jun 1997

5340-12-321-0127
Double Angle Bracket

123210127
2500067-101900.01: RNCC: 2 | RNVC: 2
2500067-101900.01: RNCC: 3 | RNVC: 2

16 Mar 1990

5340-12-194-8671
Metal Runner

121948671
C104-A24-C17: RNCC: 2 | RNVC: 2
C104-A24-C17: RNCC: 3 | RNVC: 2
C104-A24-C17: RNCC: 5 | RNVC: 2

14 Dec 1982

5340-12-375-8394
Section Block Clamp

123758394
5849956968: RNCC: 3 | RNVC: 2

10 Jul 2008

5340-12-312-1815
Nonmetallic Bumper

123121815
600511353: RNCC: 3 | RNVC: 2
81.43405.6072: RNCC: 5 | RNVC: 2
81434056072: RNCC: 5 | RNVC: 2

1 Dec 1987

5340-12-149-0918
Mending Plate

121490918
121G10013: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-180-4679
Mounting Bracket

121804679
1087270014: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-357-9166
Dust And Moisture Seal Protective Cover

123579166
2300042-255159.000: RNCC: 2 | RNVC: 2
2300042-255159.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-384-9718
Loop Clamp

123849718
5691420045: RNCC: 3 | RNVC: 2

14 Apr 2011

5340-12-386-6254
Bumper

123866254
303 098 006: RNCC: 3 | RNVC: 2

16 Sep 2011

5340-12-315-9592
Mounting Bracket

123159592
3813020240: RNCC: 3 | RNVC: 2
381 302 02 40: RNCC: 5 | RNVC: 2

9 Dec 1988

5340-12-352-6593
Sliding Door Track

123526593
5400049-725000.02: RNCC: 2 | RNVC: 2
5400049-725000.02: RNCC: 3 | RNVC: 2

5 Dec 2000

5340-12-388-0801
Runner

123880801
200315: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-12-090-7514

5340-12-091-0894

5340-12-153-6796

5340-12-348-0793
Hand Crank

123480793
6674030245: RNCC: 3 | RNVC: 2

9 Apr 1999

5340-12-375-7690
Mechanical Stop

123757690
3001287: RNCC: 3 | RNVC: 2

3 Jul 2008

5340-12-311-9783
Mounting Bracket

123119783
211853619: RNCC: 3 | RNVC: 2
81.96002.0218: RNCC: 5 | RNVC: 2
81960020218: RNCC: 5 | RNVC: 2

5 Nov 1987

5340-12-317-4213
Mounting Plate

123174213
P-145502-066: RNCC: 3 | RNVC: 2
P145502-066: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-303-6862
Manual Control Handle

123036862
GN310-10-80-A: RNCC: 3 | RNVC: 2
06360-110X80: RNCC: 3 | RNVC: 2
A10X80GN310: RNCC: 5 | RNVC: 2
NLM636-110 LAENGE 80: RNCC: 5 | RNVC: 9
NLM636-110X80: RNCC: 5 | RNVC: 9

23 Apr 1985

5340-12-185-9178
Support Hook

121859178
23176-183000-03-0: RNCC: 3 | RNVC: 2
23176-183000.03.0: RNCC: 3 | RNVC: 2
23176-183000-03-0: RNCC: 3 | RNVC: 2
23176-183000-03-0: RNCC: 5 | RNVC: 9
23176-183000.03.0: RNCC: 5 | RNVC: 9

8 Nov 1980

5340-12-701-4743
Loop Clamp

127014743
VG95211-ML-127014743: RNCC: 2 | RNVC: 2
5.12.5805.0112.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-143-0804
Pipe Bracket

121430804
2360-390000.08.0: RNCC: 2 | RNVC: 2
2360-390000-08-0: RNCC: 5 | RNVC: 2
2360-390000.08.0: RNCC: 5 | RNVC: 2
2360-390000.08.0: RNCC: 5 | RNVC: 2
2360-390000-08-0: RNCC: 5 | RNVC: 9
2360-390000.08.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-6006
Loop Clamp

127026006
VG95211-ML-127026006: RNCC: 2 | RNVC: 2
5152A-32: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-345-5888
Mounting Plate

123455888
536514-0201.000: RNCC: 2 | RNVC: 2
536514-0201.000: RNCC: 3 | RNVC: 2
10005778: RNCC: 5 | RNVC: 2

2 Apr 1998

5340-12-382-5250
Handwheel

123825250
VG85080-A-63X7-RG5: RNCC: 2 | RNVC: 2

1 Jul 2010

5340-12-199-4306
Resilient Mount

121994306
DIN95363-E15X20-NR45ST-M5X15: RNCC: 2 | RNVC: 2
1.15.20.3B.45NR/ST-M5X15: RNCC: 5 | RNVC: 2
81170-15X20-M5X15.NR45.ST: RNCC: 5 | RNVC: 2
BC4-40-24N: RNCC: 5 | RNVC: 9
BC4.40/24N: RNCC: 5 | RNVC: 9
VG95363-E15X20-NR45ST-M5X15: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-197-0092
Webbing Strap

121970092
01151-2-SCHLAUFE-FE370MM-LE550MM: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-840-370: RNCC: 3 | RNVC: 2
4900059-211263.000.0: RNCC: 3 | RNVC: 2
4900059-211263-000-0: RNCC: 5 | RNVC: 2
DIN60060-2-25X370X550-C3/SCHLAUF: RNCC: 5 | RNVC: 9

12 Sep 1983

5340-12-158-7128
Retaining Strap

121587128
23305-262190.00.0: RNCC: 2 | RNVC: 2
23305-262190-00-0: RNCC: 5 | RNVC: 2
23305-262190-00-0: RNCC: 5 | RNVC: 9
23305-262190.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-3883
Mounting Plate

127013883
VG95211-ML-127013883: RNCC: 2 | RNVC: 2
5.12.5305.3709.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-5332
Retaining Strap

127015332
VG95211-ML-127015332: RNCC: 2 | RNVC: 2
5.12.6105.1490.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-329-0742
Retaining Strap

123290742
C42080-A26-C139: RNCC: 2 | RNVC: 2
C42080-A26-C139: RNCC: 3 | RNVC: 2

17 Jul 1992

5340-12-181-8572
Lock-Release Lever

121818572
06430-1516X55-RAL6014: RNCC: 3 | RNVC: 2
0151605542: RNCC: 3 | RNVC: 2
01516-55GELB0LIV: RNCC: 5 | RNVC: 2
0151605500-RAL6014: RNCC: 5 | RNVC: 2
01516.55-GELBOLIV: RNCC: 5 | RNVC: 2
NLM643-1516X55GELB0LIV: RNCC: 5 | RNVC: 9
NLM643-1516X55-RAL6014: RNCC: 5 | RNVC: 9
NLM6430-1516X55-BAL6014: RNCC: 5 | RNVC: 9

21 Dec 1979

5340-12-173-8549
Retaining Strap

121738549
P-296652-027: RNCC: 3 | RNVC: 2
P296652-027: RNCC: 5 | RNVC: 2

17 May 1978

5340-12-331-2525
Webbing Strap

123312525
TK2540-001-G: RNCC: 2 | RNVC: 2
M21540/ZU1: RNCC: 3 | RNVC: 2
RSG50/2: RNCC: 5 | RNVC: 2
RSG50/2: RNCC: 5 | RNVC: 2
RSGU50/2(17): RNCC: 5 | RNVC: 2
M21540/ZU1: RNCC: 5 | RNVC: 2
RSGU50/2(17): RNCC: 5 | RNVC: 2

7 Apr 1993

5340-12-342-5659
Nonmetallic Bumper

123425659
4619870039: RNCC: 3 | RNVC: 2
701892: RNCC: 5 | RNVC: 2
8499-34: RNCC: 5 | RNVC: 2
9223395380: RNCC: 5 | RNVC: 2
43-4028-08: RNCC: 5 | RNVC: 2

27 Feb 1997

5340-12-301-2024
Angle Bracket

123012024
A-295144-001: RNCC: 3 | RNVC: 2
A295144-001: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-321-6169
Electrical-Mechanical Equipment Post

123216169
VG95148C5,5XM3X6-2.0380.30-E2A: RNCC: 2 | RNVC: 2
5.13.053: RNCC: 3 | RNVC: 2
VG95148C5,5XM3X6-2.0380.30-E2A: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-306-2919
Mending Plate

123062919
6100128-11100.009: RNCC: 2 | RNVC: 2
4215017903: RNCC: 3 | RNVC: 2

17 Feb 1986

5340-12-158-4306
Butt Hinge

121584306
28.3129.0501: RNCC: 3 | RNVC: 9
C39123-Z14-C19: RNCC: 5 | RNVC: 2
C39123Z14C19: RNCC: 5 | RNVC: 2
28-3129-0501: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-380-8376
Mounting Bracket

123808376
8W131Q003-1000.02: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-363-3187
Loop Clamp

123633187
06673002525: RNCC: 3 | RNVC: 2
DIN3016-D1-25X15-W3-CR: RNCC: 5 | RNVC: 2

26 May 2004

5340-12-123-9026
Nonmetallic Bumper

121239026
81960200025: RNCC: 3 | RNVC: 2
00.03361-6157: RNCC: 5 | RNVC: 2
00033616157: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-9710
Angle Bracket

127019710
VG95211-ML-127019710: RNCC: 2 | RNVC: 2
02.6110.2560: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-164-2957
Dust And Moisture Seal Protective Cap

121642957
490126-22100-10: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-025-1764

5340-12-359-8647
Access Cover

123598647
2500261-183764.000.0: RNCC: 2 | RNVC: 2
2500261-183764.000.0: RNCC: 3 | RNVC: 2

17 Mar 2003

5340-12-385-0708
Loop Clamp

123850708
5691420145: RNCC: 3 | RNVC: 2

27 Apr 2011

5340-12-366-8326
Permanent Magnet

123668326
300770: RNCC: 3 | RNVC: 2
2611502257: RNCC: 5 | RNVC: 2
2611502257: RNCC: 5 | RNVC: 9

14 Jun 2005

5340-12-356-7229
Mounting Bracket

123567229
6028484: RNCC: 3 | RNVC: 2
6015.127.70.11.000: RNCC: 5 | RNVC: 9

27 Mar 2002

5340-12-371-0043
Fuehrungs- Schiene

123710043
867017711: RNCC: 3 | RNVC: 2

25 Jan 2007

5340-12-379-9432
Nut And Bolt Locking Plate

123799432
26.04.01.028: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-12-319-7678
Access Cover

123197678
3082 307 045: RNCC: 3 | RNVC: 2
3082307045: RNCC: 5 | RNVC: 9

2 Nov 1989

5340-12-328-8730
Sealing Plug Assembly

123288730
B80097916: RNCC: 3 | RNVC: 2
B80097916: RNCC: 5 | RNVC: 2

26 Jun 1992

5340-12-338-5408
Handwheel

123385408
SP14980: RNCC: 3 | RNVC: 2
69.4.315.9504: RNCC: 5 | RNVC: 9

25 Jul 1995

5340-12-338-8382
Angle Bracket

123388382
463-630541.015: RNCC: 3 | RNVC: 9
9898211: RNCC: 5 | RNVC: 9

30 Aug 1995

5340-12-338-9726
Dust And Moisture Seal Protective Plug

123389726
300F311: RNCC: 3 | RNVC: 2
GPN300F311: RNCC: 5 | RNVC: 2
909514922: RNCC: 5 | RNVC: 2
300F311: RNCC: 5 | RNVC: 2
F311: RNCC: 5 | RNVC: 2
F311: RNCC: 5 | RNVC: 9
GPN300,F311: RNCC: 5 | RNVC: 9

21 Sep 1995

5340-12-337-8295
Angle Bracket

123378295
9890410: RNCC: 3 | RNVC: 9
465-068311.000: RNCC: 5 | RNVC: 9

19 Apr 1995

5340-12-353-6871
Multiple Angle Bracket

123536871
J92222436-401: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-358-3165
Retaining Bail

123583165
2500261-060000.039.0: RNCC: 2 | RNVC: 2
2500261-060000.039.0: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-12-702-4370
Angle Bracket

127024370
VG95211-ML-127024370: RNCC: 2 | RNVC: 2
5.51.0220.0250.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-191-7986
Resilient Mount

121917986
DIN95368-C2-1-NR60-ST: RNCC: 2 | RNVC: 2
57860260342: RNCC: 5 | RNVC: 2
816.064.786026 S3.NR60.ST: RNCC: 5 | RNVC: 2
KONUS-LAGER-786026S3.NR60.ST: RNCC: 5 | RNVC: 2
786026S3 MITTEL: RNCC: 5 | RNVC: 2
VG95368-C2-1-NR60ST: RNCC: 5 | RNVC: 9
786026S3: RNCC: 5 | RNVC: 9
786026SF MITTEL: RNCC: 5 | RNVC: 9

5 Mar 1982

5340-12-353-1827
Mending Plate

123531827
2500238-042000.012.0: RNCC: 2 | RNVC: 2
2500238-042000.012.0: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-334-7372
Webbing Strap

123347372
XB 713: RNCC: 3 | RNVC: 2
XB713: RNCC: 5 | RNVC: 2
DIN60060-1-32X1500-C3: RNCC: 5 | RNVC: 9

14 Jun 1994

5340-12-322-7105
Metal Runner

123227105
2300124-180060.000.0: RNCC: 2 | RNVC: 2
2300124-180060.000.0: RNCC: 3 | RNVC: 2
2300124-180060.000.0: RNCC: 3 | RNVC: 2

14 Sep 1990

5340-12-174-1924
Friction Catch

121741924
23223-061600.00.0: RNCC: 2 | RNVC: 2
23223-061600.00.0: RNCC: 3 | RNVC: 2
23223-061600-00-0: RNCC: 5 | RNVC: 2
23223-061600.00.0: RNCC: 5 | RNVC: 2
23223-061600.00.0: RNCC: 5 | RNVC: 9
23223-061600-00-0: RNCC: 5 | RNVC: 9

12 Jun 1978

5340-12-345-2579
Helical Compression Spring Seat

123452579
9444800: RNCC: 3 | RNVC: 2
A2FM28/6.1W/201-1-6: RNCC: 5 | RNVC: 2

18 Feb 1998

5340-12-314-8475
Mounting Bracket

123148475
P-146243-009: RNCC: 3 | RNVC: 2
P146243-009: RNCC: 5 | RNVC: 2

17 Aug 1988

5340-12-351-5082
Mounting Bracket

123515082
4615200141: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-043-3241

5340-12-345-4464
Spacing Threaded Standoff

123454464
54.0053.300.05: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-12-190-9295
Metal Runner

121909295
NO PRIMARY REF 12-190-9295: RNCC: 3 | RNVC: 2
5717 137184: RNCC: 5 | RNVC: 9
5717137184: RNCC: 5 | RNVC: 9

23 Dec 1981

5340-12-178-3214
Loop Clamp

121783214
06678400116: RNCC: 3 | RNVC: 2
A25MAN194: RNCC: 5 | RNVC: 2
06.67840-0116: RNCC: 5 | RNVC: 2
06.67840-0116: RNCC: 5 | RNVC: 2

12 Apr 1979

5340-12-381-4967
Mounting Bracket

123814967
WEW-5838-03: RNCC: 3 | RNVC: 2

23 Feb 2010

5340-12-320-0958
Mounting Bracket

123200958
218732-2000: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-338-7717
Hinge Torsion Bar

123387717
9865988: RNCC: 3 | RNVC: 9
462-206065.000: RNCC: 5 | RNVC: 9

24 Aug 1995

5340-12-188-7764
Catch Strike

121887764
5801479-3180.02: RNCC: 2 | RNVC: 2
5801479-3180.02: RNCC: 3 | RNVC: 2
5801479-3180-02: RNCC: 5 | RNVC: 2
5801479-3180-02: RNCC: 5 | RNVC: 9
5801479-3180.02: RNCC: 5 | RNVC: 9

29 Jul 1981

5340-12-180-3150
Retaining Strap

121803150
2300032-430300.03: RNCC: 2 | RNVC: 2
42018109: RNCC: 5 | RNVC: 2
42018109EE5042-36: RNCC: 5 | RNVC: 2
2300032-430300-03: RNCC: 5 | RNVC: 9
2300032-430300-03: RNCC: 5 | RNVC: 9

5 Sep 1979

5340-12-146-8670
Loop Clamp

121468670
10C: RNCC: 3 | RNVC: 2
5800583-096190-123: RNCC: 5 | RNVC: 2
5800583-096190.123: RNCC: 5 | RNVC: 2
25704-350000T179: RNCC: 5 | RNVC: 2
211-15100: RNCC: 5 | RNVC: 2
25704-350000T179: RNCC: 5 | RNVC: 9
202007901: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-9038
Retaining Bail

127019038
VG95211-ML-127019038: RNCC: 2 | RNVC: 2
N1129-16: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-335-4328
Spacing Threaded Standoff

123354328
VG95148B5XM2,5X11,3-NRST: RNCC: 2 | RNVC: 2
VG95148-B5XM2,5X11,3-NRST: RNCC: 3 | RNVC: 2
52.9352.103.27: RNCC: 5 | RNVC: 2

18 Aug 1994

5340-12-365-5858
Double Angle Bracket

123655858
J29120112-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-701-4167
Mounting Bracket

127014167
VG95211-ML-127014167: RNCC: 2 | RNVC: 2
5.12.5311.8450.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-380-0341
Retaining Strap

123800341
242-4924-32-10-00: RNCC: 3 | RNVC: 2

21 Sep 2009

5340-12-312-6987
Metal Runner

123126987
6100108-1770.03: RNCC: 2 | RNVC: 2
6100108-1770.03: RNCC: 3 | RNVC: 2

28 Jan 1988

5340-12-352-3683
Retaining Strap

123523683
BD9-65MMN346: RNCC: 3 | RNVC: 2
MMN346-DB65: RNCC: 5 | RNVC: 2
700346 065200: RNCC: 5 | RNVC: 2
700346065200: RNCC: 5 | RNVC: 2

13 Nov 2000

5340-12-190-4509
Nonmetallic Bumper

121904509
1000042-156000.03: RNCC: 3 | RNVC: 2
7130-20P: RNCC: 5 | RNVC: 2

26 Nov 1981

5340-12-139-9842
Loop Clamp

121399842
DIN3016-2-G1-155X25-W1-2: RNCC: 2 | RNVC: 2
SP155/25SK: RNCC: 3 | RNVC: 2
DIN3016-G1-155X25-W1-2: RNCC: 3 | RNVC: 2
SP155-25X1-5SKN288A: RNCC: 5 | RNVC: 2
SP155-25SK: RNCC: 5 | RNVC: 2
1610000155: RNCC: 5 | RNVC: 2
VG95931-G155X25-W1: RNCC: 5 | RNVC: 9
VG95931G155X25W1: RNCC: 5 | RNVC: 9
DIN3016-G1-155X25-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-2968
Detent Plunger

121902968
47-1156-000120.007.0: RNCC: 2 | RNVC: 2
47-1156-000120.007.0: RNCC: 3 | RNVC: 2
47-1156-000120-007-0: RNCC: 5 | RNVC: 2

17 Nov 1981

5340-12-196-9959
Webbing Strap

121969959
01151-2-FE500GLATT-LE330SCHLAUFE: RNCC: 3 | RNVC: 2
4900055-211257.000.0: RNCC: 3 | RNVC: 2
79057/GLATT/SCHLAUFE-780-500: RNCC: 3 | RNVC: 2
4900059-211257-000-0: RNCC: 5 | RNVC: 2
DIN60060-2-25X500X330-C3/GLAT/SC: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-315-5986
Retaining Strap

123155986
DIN3016-1-F1-24X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-24X15-W5: RNCC: 3 | RNVC: 2
RSGU2.24/15-W5: RNCC: 3 | RNVC: 2
VG95931F24X15W5: RNCC: 5 | RNVC: 9
DIN3016-F1-24X15-W5: RNCC: 5 | RNVC: 9

11 Nov 1988

5340-12-368-5585
Mounting Bracket

123685585
1901-110100.000.0: RNCC: 2 | RNVC: 2
1901-110100.000.0: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-12-374-5372
Retaining Strap

123745372
2300014-208006.00.0: RNCC: 2 | RNVC: 2
2300014-208006.00.0: RNCC: 3 | RNVC: 2

25 Feb 2008

5340-12-309-5672
Loop Clamp

123095672
DIN3016-1-D1-48X20-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.48/20-W1: RNCC: 3 | RNVC: 2
DIN3016-D1-48X20-W1-2: RNCC: 3 | RNVC: 2
09410020048: RNCC: 5 | RNVC: 2
RSGU1100.48/20: RNCC: 5 | RNVC: 2
Q 314 176 048: RNCC: 5 | RNVC: 2
RSGU1.48/20: RNCC: 5 | RNVC: 2
9410020048: RNCC: 5 | RNVC: 2
Q 314 176 048: RNCC: 5 | RNVC: 2
DIN3016-D1-48X20-W1-2: RNCC: 5 | RNVC: 9

4 Feb 1987

5340-12-161-0180
Loop Clamp

121610180
G20TAN15802N: RNCC: 3 | RNVC: 2
G20TAN15802-1-4544-9: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-358-7101
Manual Control Lever

123587101
2500262-000350.000.0: RNCC: 2 | RNVC: 2
2500262-000350.000.0: RNCC: 3 | RNVC: 2

7 Nov 2002

5340-12-345-2966
Double Angle Bracket

123452966
7-162-0323-016-0: RNCC: 3 | RNVC: 2

26 Feb 1998

5340-12-317-7636
Mounting Bracket

123177636
1000192-00 0 00200: RNCC: 2 | RNVC: 2
1000192-00 0 00200: RNCC: 3 | RNVC: 2
1000192-00 0 00200: RNCC: 5 | RNVC: 9

11 May 1989

5340-12-155-8404
Gurt

121558404
23331-262363-00-0: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-313-8790
Electrical-Mechanical Equipment Post

123138790
VG95148B6XM3X6,5-NRST: RNCC: 2 | RNVC: 2
52.2033.030.03: RNCC: 3 | RNVC: 2
VG95148B6XM3X6,5-NRST: RNCC: 3 | RNVC: 2

17 May 1988

5340-12-372-8740
Access Cover

123728740
2300211-203398.000.0: RNCC: 2 | RNVC: 2
2300211-203398.000.0: RNCC: 3 | RNVC: 2

30 Aug 2007

5340-12-317-5277
Expansion Shield

123175277
8/51: RNCC: 3 | RNVC: 9
0 10 100 11: RNCC: 5 | RNVC: 9

14 Apr 1989

5340-12-317-7754
Access Cover

123177754
4/0439/7359/1: RNCC: 3 | RNVC: 2

11 May 1989

5340-12-198-7255
Angle Bracket

121987255
7633 322 221: RNCC: 3 | RNVC: 2
7633322221: RNCC: 5 | RNVC: 2
81473400057: RNCC: 5 | RNVC: 2
7633322221: RNCC: 5 | RNVC: 9

22 Feb 1984

5340-12-304-5415
Angle Bracket

123045415
4064280140: RNCC: 3 | RNVC: 2

29 Jul 1985

5340-12-191-2530
Hasp Staple

121912530
885: RNCC: 3 | RNVC: 2

20 Jan 1982

5340-12-360-0345
Double Angle Bracket

123600345
8012.10.01: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-359-9728
Angle Bracket

123599728
5551870640: RNCC: 3 | RNVC: 2
15010310: RNCC: 5 | RNVC: 2

25 Mar 2003

5340-12-349-3902
Access Cover

123493902
T524M1228161: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-12-185-4333
Turnbuckle Body

121854333
01TL30176: RNCC: 3 | RNVC: 2

7 Oct 1980

5340-12-358-1345
Detent Plunger

123581345
4000A-310410.006.0: RNCC: 2 | RNVC: 2
4000A-310410.006.0: RNCC: 3 | RNVC: 2

18 Sep 2002

5340-12-197-4033
Mending Plate

121974033
2300109-010200.005.0: RNCC: 2 | RNVC: 2
2300109-010200.005.0: RNCC: 3 | RNVC: 2
2300109-010200.005.0: RNCC: 3 | RNVC: 2
2300109-010200.005.0: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-302-0028
Flush Catch Claw

123020028
1300061-160000.08: RNCC: 2 | RNVC: 2
7834343: RNCC: 3 | RNVC: 2
1300061-160000.08: RNCC: 5 | RNVC: 2
3-7834-343: RNCC: 5 | RNVC: 2
7834-343: RNCC: 5 | RNVC: 2
1300061-160000-08: RNCC: 5 | RNVC: 9
1300061-160000.08: RNCC: 5 | RNVC: 9

27 Nov 1984

5340-12-308-8315
Access Cover

123088315
4.066-139.0: RNCC: 3 | RNVC: 2
4.066-139: RNCC: 5 | RNVC: 9

21 Nov 1986

5340-12-387-0395
Clamping Catch

123870395
YN 01690 90 530 0: RNCC: 3 | RNVC: 2
YN01690-90-530-0: RNCC: 5 | RNVC: 2

28 Oct 2011

5340-12-701-3303
Mounting Bracket

127013303
VG95211-ML-127013303: RNCC: 2 | RNVC: 2
5.12.5104.0120.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-167-8606
Bow Handle

121678606
1918-039300-008: RNCC: 3 | RNVC: 2
19-039300-11008: RNCC: 5 | RNVC: 2
1918-039300-008: RNCC: 5 | RNVC: 9

26 Jan 1977

5340-12-142-8513
Loop Clamp

121428513
0009953101: RNCC: 3 | RNVC: 2
RSGU11-022-010-20: RNCC: 5 | RNVC: 2
RSGU1-8022-10-20: RNCC: 5 | RNVC: 2
RSGU1.8022-10/20: RNCC: 5 | RNVC: 2
RSGU11.022.10/20: RNCC: 5 | RNVC: 2
RSGU11.8022.10/20: RNCC: 5 | RNVC: 2
9418022010: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-340-1554
Angle Bracket

123401554
81423900156: RNCC: 3 | RNVC: 2
219511-4000: RNCC: 5 | RNVC: 2
2195114000: RNCC: 5 | RNVC: 2

7 Mar 1996

5340-12-131-5899
Rod End Clevis

121315899
DIN71752-G10X40-22S20K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G10X40-22S20K-A3P: RNCC: 3 | RNVC: 2
DIN71752-G10X40-22S20K-A3P: RNCC: 3 | RNVC: 2
100200100040/023-22S20K: RNCC: 5 | RNVC: 2
071752010002: RNCC: 5 | RNVC: 2
G10X40DIN71752-22S20K: RNCC: 5 | RNVC: 9
G10X40DIN71752-22S20K: RNCC: 5 | RNVC: 9
DIN71752-G10X40-22S20K: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-7220
Access Cover

127027220
40-13706608832: RNCC: 2 | RNVC: 2

7 Dec 1995

5340-12-382-9446
Mounting Bracket

123829446
82418605057: RNCC: 3 | RNVC: 2
82.41860-5057: RNCC: 5 | RNVC: 2
82418605057: RNCC: 5 | RNVC: 2
82.41860-5057: RNCC: 5 | RNVC: 2

26 Aug 2010

5340-12-176-0357
Retaining Band

121760357
0287 3366: RNCC: 3 | RNVC: 2
2873365UA0704-80: RNCC: 5 | RNVC: 2
2873366: RNCC: 5 | RNVC: 2
2873366KZ: RNCC: 5 | RNVC: 2
2873366KZ0704-80: RNCC: 5 | RNVC: 2

6 Nov 1978

5340-12-388-1829
Access Cover

123881829
1030124-206400.004.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-702-0037
Loop Clamp

127020037
VG95211-ML-127020037: RNCC: 2 | RNVC: 2
1667S-50-39N: RNCC: 3 | RNVC: 2
1667S-50-39: RNCC: 5 | RNVC: 2
1667S50-39: RNCC: 5 | RNVC: 2
0500813002569: RNCC: 5 | RNVC: 9

6 Apr 1995

5340-12-163-7582
Turnbuckle Body

121637582
100332-13000.54: RNCC: 2 | RNVC: 2
100332-13000-54: RNCC: 5 | RNVC: 2
100332-13000.54: RNCC: 5 | RNVC: 2
100332-13000-54: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-174-2934
Retaining Strap

121742934
23223-060000.10.0: RNCC: 2 | RNVC: 2
23223-060000-10-0: RNCC: 5 | RNVC: 2
23223-060000.10.0: RNCC: 5 | RNVC: 2
23223-060000-10-0: RNCC: 5 | RNVC: 9

21 Jun 1978

5340-12-702-4665
Lock-Release Lever

127024665
VG95211-ML-127024665: RNCC: 2 | RNVC: 2
5.51.0603.1390.04: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-343-9869
Threaded Rod End

123439869
330205-1353.000: RNCC: 3 | RNVC: 2
330205-1353.000: RNCC: 5 | RNVC: 9

22 Aug 1997

5340-12-188-8040
Pad Eye

121888040
5801479-3023: RNCC: 3 | RNVC: 2
5801479-3023: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-321-0368
Expansion Plug

123210368
DIN443-B30-PHR: RNCC: 2 | RNVC: 2
DIN443-B30-ST-PHR: RNCC: 5 | RNVC: 2
B30 DIN443-PHR: RNCC: 5 | RNVC: 2
DIN443-B30: RNCC: 5 | RNVC: 9

19 Mar 1990

5340-12-325-7566
Webbing Strap

123257566
79017/026-0700-0300: RNCC: 3 | RNVC: 2
79017/026-0700-0300: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-303-1623
Dust And Moisture Seal Protective Cap-Plug

123031623
R1/8: RNCC: 3 | RNVC: 2
C 4098 657 09: RNCC: 5 | RNVC: 2
C 4098 657 09: RNCC: 5 | RNVC: 2

1 Mar 1985

5340-12-198-5015
Double Angle Bracket

121985015
160-744409: RNCC: 3 | RNVC: 2
160-744409: RNCC: 5 | RNVC: 9

2 Feb 1984

5340-12-331-3080
Loop Clamp

123313080
R318: RNCC: 3 | RNVC: 2
51974016039: RNCC: 5 | RNVC: 2
51.97401-6039: RNCC: 5 | RNVC: 2

21 Apr 1993

5340-12-184-7727
Manual Control Handle

121847727
1200032-740000: RNCC: 2 | RNVC: 2
332104-8340.000: RNCC: 3 | RNVC: 2
332104-8340: RNCC: 5 | RNVC: 2
332104-8340.000: RNCC: 5 | RNVC: 9
1200032-740000: RNCC: 5 | RNVC: 9

16 Aug 1980

5340-12-188-6784
Butt Hinge

121886784
A-245875-011: RNCC: 3 | RNVC: 2
A245875-011: RNCC: 5 | RNVC: 2

23 Jul 1981

5340-12-199-1808
Mending Plate

121991808
P-896383-007: RNCC: 3 | RNVC: 2
P896383-007: RNCC: 5 | RNVC: 2

3 Apr 1984

5340-12-316-1773
Loop Clamp

123161773
DIN3016-1-D1-45X25W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-45X25W1-2: RNCC: 3 | RNVC: 2
RSGU1.45/25: RNCC: 3 | RNVC: 2
RSGU1100.45/25: RNCC: 5 | RNVC: 2
DIN3016-D1-45X25W1-2: RNCC: 5 | RNVC: 9
VG95931-D45X25-W1: RNCC: 5 | RNVC: 9

29 Dec 1988

5340-12-364-3934
Spacing Threaded Standoff

123643934
598101-183400.041.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-176-1910
Nonmetallic Bumper

121761910
CF450009: RNCC: 3 | RNVC: 2
CF 450 009: RNCC: 5 | RNVC: 2
CF450009: RNCC: 5 | RNVC: 2
CF 450 009: RNCC: 5 | RNVC: 2
CF450009: RNCC: 5 | RNVC: 2
CF 450 009: RNCC: 5 | RNVC: 2

13 Nov 1978

5340-12-308-4475
Loop Clamp

123084475
2118017: RNCC: 3 | RNVC: 2
5VC4304: RNCC: 3 | RNVC: 2

10 Oct 1986

5340-12-313-8676
Retaining Band

123138676
3228900271: RNCC: 3 | RNVC: 2
322 890 02 71: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-301-4719
Angle Bracket

123014719
4179196: RNCC: 3 | RNVC: 2

18 Oct 1984

5340-12-020-7117

5340-12-329-7628
Mending Plate

123297628
81517100089: RNCC: 3 | RNVC: 2
81.51710.0089: RNCC: 5 | RNVC: 9

24 Sep 1992

5340-12-323-9783
Mending Plate

123239783
M514041: RNCC: 3 | RNVC: 9
M514041: RNCC: 5 | RNVC: 2

14 Jan 1991

5340-12-311-3669
Dust And Moisture Seal Protective Plug

123113669
2534101: RNCC: 3 | RNVC: 2

24 Aug 1987

5340-12-318-7665
Counterbalance Weight

123187665
0223 3642: RNCC: 3 | RNVC: 2
02233642ED0141-05: RNCC: 5 | RNVC: 2

15 Aug 1989

5340-12-316-3359
Extension Handle

123163359
100195-3110.03: RNCC: 3 | RNVC: 2
100195-3110.03: RNCC: 5 | RNVC: 9

10 Jan 1989

5340-12-186-3190
Mounting Bracket

121863190
3553950: RNCC: 3 | RNVC: 2

17 Dec 1980

5340-12-379-5402
Angle Bracket

123795402
S535M1007235: RNCC: 3 | RNVC: 2

5 Aug 2009

5340-12-363-9068
Double Angle Bracket

123639068
J32320335-401: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-360-6869
Clamping Catch

123606869
87-401.10-04.00-35: RNCC: 3 | RNVC: 2

30 Jun 2003

5340-12-363-9057
Angle Bracket

123639057
J21220015-003: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-357-4045
Retaining Strap

123574045
J92228188-001: RNCC: 3 | RNVC: 2
6707780: RNCC: 5 | RNVC: 2

18 Jun 2002

5340-12-196-8321
Rod End Connector

121968321
KB-57716-625: RNCC: 3 | RNVC: 2

23 Aug 1983

5340-12-317-8185
Clamp Bolt Assembly

123178185
V3SD18126-01: RNCC: 3 | RNVC: 2
PAN6620-01: RNCC: 5 | RNVC: 2

17 May 1989

5340-12-325-5970
Filler Opening Cap

123255970
9HD 097 099-00: RNCC: 3 | RNVC: 2
097099-00: RNCC: 5 | RNVC: 2
9HD 097 099-00: RNCC: 5 | RNVC: 9

20 Jun 1991

5340-12-324-0127
Angle Bracket

123240127
23305-264171.01.0: RNCC: 2 | RNVC: 2
23305-264171.01.0: RNCC: 3 | RNVC: 2
23305-264171-01-0: RNCC: 5 | RNVC: 2

16 Jan 1991

5340-12-317-4632
Mending Plate

123174632
P-145546-007: RNCC: 3 | RNVC: 2
P145546-007: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-12-162-9334
Turnbuckle Body

121629334
2360-266100.01.0: RNCC: 2 | RNVC: 2
2360-266100-01-0: RNCC: 5 | RNVC: 2
2360-266100.01.0: RNCC: 5 | RNVC: 2
2360-266100-01-0: RNCC: 5 | RNVC: 2
2360-266100.01.0: RNCC: 5 | RNVC: 2
2360-266100-01-0: RNCC: 5 | RNVC: 9
2360-266100.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-304-6064
Access Cover

123046064
102681: RNCC: 3 | RNVC: 2
2095-24-0-408: RNCC: 5 | RNVC: 2
2095.24.0.408: RNCC: 5 | RNVC: 2

5 Aug 1985

5340-12-367-2246
Buckle

123672246
RED-8140-S: RNCC: 3 | RNVC: 9

21 Jul 2005

5340-12-361-4690
Mounting Plate

123614690
009-221.468-008: RNCC: 2 | RNVC: 2
009-221.468-008: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-316-4754
Mending Plate

123164754
5600023-190370.003.0: RNCC: 2 | RNVC: 2
5600023-190370.003.0: RNCC: 3 | RNVC: 2
1519312: RNCC: 5 | RNVC: 2
22012.0.02.320.03: RNCC: 5 | RNVC: 9
22012.0.02.320.03: RNCC: 5 | RNVC: 9

19 Jan 1989

5340-12-360-8676
Dust And Moisture Seal Protective Cover

123608676
83-8245: RNCC: 3 | RNVC: 2

17 Jul 2003

5340-12-320-7055
Mending Plate

123207055
C249-A29-C62: RNCC: 2 | RNVC: 2
C249-A29-C62: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-132-8917
Retaining Strap

121328917
DIN72573-1X8-ST: RNCC: 2 | RNVC: 2
DIN72573-1X8-ST: RNCC: 3 | RNVC: 2
1X8DIN72573ST: RNCC: 5 | RNVC: 2
1X8DIN72573STR0H: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-340-8852
Helical Compression Spring Seat

123408852
51041030081: RNCC: 3 | RNVC: 2
51.04103-0081: RNCC: 5 | RNVC: 2
51.04103-0081: RNCC: 5 | RNVC: 2

27 Jun 1996

5340-12-338-2633
Mounting Bracket

123382633
454-250731.000: RNCC: 3 | RNVC: 9

13 Jun 1995

5340-12-196-0214
Handle Grip

121960214
4.0598-02: RNCC: 3 | RNVC: 2
570574977: RNCC: 5 | RNVC: 2

17 May 1983

5340-12-301-2413
Rim Lock

123012413
6000101: RNCC: 3 | RNVC: 2
1280-007: RNCC: 5 | RNVC: 2
4178421: RNCC: 5 | RNVC: 2

29 Sep 1984

5340-12-161-0202
Turnbuckle Body

121610202
LN29601B03-170: RNCC: 2 | RNVC: 2
16X1X170M10X1LN29601: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-327-4161
Bow Handle

123274161
30819-017: RNCC: 3 | RNVC: 2

21 Jan 1992

5340-12-313-1642
Mounting Bracket

123131642
2300013-0410.00: RNCC: 2 | RNVC: 2
2300013-0410.00: RNCC: 3 | RNVC: 2
2300013-0410.00: RNCC: 5 | RNVC: 9

9 Mar 1988

5340-12-176-1562
Retaining Band

121761562
PAN5408-080: RNCC: 3 | RNVC: 2

9 Nov 1978

5340-12-351-5855
Angle Bracket

123515855
160-88328-10: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-12-127-4312
Clamping Catch

121274312
81658005002: RNCC: 3 | RNVC: 2
90.17351-6449: RNCC: 5 | RNVC: 2
90173516449: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-152-5471
Door Button

121525471
7101-11-31-02: RNCC: 3 | RNVC: 2
7101-11-31.02: RNCC: 3 | RNVC: 2
161741401: RNCC: 5 | RNVC: 2
7101-11-31-02: RNCC: 5 | RNVC: 9
7101-11-31.02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-6702
Webbing Strap

121906702
5801435-030920.00: RNCC: 2 | RNVC: 2
5801435-030920.00: RNCC: 3 | RNVC: 2
5801435-030920.00: RNCC: 3 | RNVC: 2
5801435-030920.00: RNCC: 5 | RNVC: 9
5801435-030920-00: RNCC: 5 | RNVC: 9
000-C1-25X2,5X400-BW-RAL6031: RNCC: 6 | RNVC: 9

8 Dec 1981

5340-12-702-2496
Mounting Bracket

127022496
VG95211-ML-127022496: RNCC: 2 | RNVC: 2
30.9205.13: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-180-6766
Webbing Strap

121806766
R20233: RNCC: 3 | RNVC: 2
R20233: RNCC: 5 | RNVC: 9

26 Sep 1979

5340-12-190-3342
Loop Clamp

121903342
03417719: RNCC: 3 | RNVC: 2
5146-27-07.01: RNCC: 5 | RNVC: 2
E5146-27-07.01: RNCC: 5 | RNVC: 2
3417719EE5029-27: RNCC: 5 | RNVC: 2
3417719: RNCC: 5 | RNVC: 9

23 Nov 1981

5340-12-041-1014

5340-12-359-2350
Mounting Bracket

123592350
9425422540: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-12-358-7365
Dust And Moisture Seal Protective Cap

123587365
P16501: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-043-7354

5340-12-358-7733
Mounting Plate

123587733
3818600131: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-12-199-4205
Angle Bracket

121994205
2300088-311111.01: RNCC: 2 | RNVC: 2
2300088-311111.01: RNCC: 3 | RNVC: 2
2300088-311111-01: RNCC: 5 | RNVC: 2
2300088-311111-01: RNCC: 5 | RNVC: 9
2300088-311111.01: RNCC: 5 | RNVC: 9
2300088-311111.01: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-701-5709
Mounting Plate

127015709
VG95211-ML-127015709: RNCC: 2 | RNVC: 2
5.12.6149.0230.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-394-4105
Mechanic Equipment Hardware Kit

123944105
Y10222-182098.000.0: RNCC: 2 | RNVC: 2
Y10222-182098.000.0: RNCC: 3 | RNVC: 2

28 Nov 2013

5340-12-366-2188
Mounting Bracket

123662188
J21220040-007: RNCC: 3 | RNVC: 2

23 Mar 2005

5340-12-359-8651
Pad Eye

123598651
2300232-183400.003.0: RNCC: 2 | RNVC: 2
2300232-183400.003.0: RNCC: 3 | RNVC: 2

17 Mar 2003

5340-12-367-5231
Access Cover

123675231
1030070-063710.000.0: RNCC: 3 | RNVC: 2

29 Aug 2005

5340-12-330-0541
Nut And Bolt Locking Plate

123300541
0049174: RNCC: 3 | RNVC: 2
8403786: RNCC: 5 | RNVC: 2
4-0049-174: RNCC: 5 | RNVC: 2

28 Oct 1992

5340-12-358-1566
Access Cover

123581566
2800-232000.002.0: RNCC: 2 | RNVC: 2
2800-232000.002.0: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-12-390-6219
Butt Hinge Leaf

123906219
SK1171-194281.000.0: RNCC: 3 | RNVC: 2
7116889: RNCC: 5 | RNVC: 2

28 Nov 2012

5340-12-338-8713
Mounting Plate

123388713
6700017-640120.01: RNCC: 2 | RNVC: 2
6700017-640120.01: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-12-361-6485
Mounting Bracket

123616485
51271400023: RNCC: 3 | RNVC: 2
51.27140-0023: RNCC: 5 | RNVC: 2

29 Oct 2003

5340-12-193-9557
Electrical-Mechanical Equipment Post

121939557
VG95148B6XM3X33,4-NRST: RNCC: 2 | RNVC: 2
VG95148B6XM3X33,4-NRST: RNCC: 3 | RNVC: 2
67.3521.000.45-A006: RNCC: 3 | RNVC: 2
206891: RNCC: 5 | RNVC: 2
67-3521-000-45A006: RNCC: 5 | RNVC: 9

20 Sep 1982

5340-12-306-0920
Manual Control Handle

123060920
5801984-200290.000.0: RNCC: 2 | RNVC: 2
5801984-200290.000.0: RNCC: 3 | RNVC: 2

27 Jan 1986

5340-12-369-3633
Mending Plate

123693633
M-38-030-09.0/2: RNCC: 3 | RNVC: 2

26 Jun 2006

5340-12-185-0641
Mending Plate

121850641
F01-240000-08-0: RNCC: 3 | RNVC: 2

6 Sep 1980

5340-12-305-1105
Electrical-Mechanical Equipment Post

123051105
4900059-111121.004.0: RNCC: 3 | RNVC: 2
1228076: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-354-3096
Mounting Bracket

123543096
0008370214: RNCC: 3 | RNVC: 2
A0008370214: RNCC: 5 | RNVC: 2
A 000 837 02 14: RNCC: 5 | RNVC: 9

29 Jun 2001

5340-12-308-3487
Bow Handle

123083487
0A846.92-01-00-00-006: RNCC: 3 | RNVC: 2

1 Oct 1986

5340-12-340-9892
Angle Bracket

123409892
20-5110-257: RNCC: 3 | RNVC: 2

12 Jul 1996

5340-12-700-8893
Loop Clamp

127008893
VG95211-ML-127008893: RNCC: 2 | RNVC: 2
2-10-12-8-1 OST1 11124-73: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-389-9149
Spacing Threaded Standoff

123899149
2300571-010000.005.0: RNCC: 2 | RNVC: 2
2300571-010000.005.0: RNCC: 3 | RNVC: 2

12 Sep 2012

5340-12-367-1926
Angle Bracket

123671926
RD99-00-021000.02: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-12-376-3519
Friction Catch

123763519
M1-81: RNCC: 3 | RNVC: 2

17 Sep 2008

5340-12-318-3856
Mounting Bracket

123183856
521910-190227.000.0: RNCC: 2 | RNVC: 2
22013.0.08.250.00: RNCC: 3 | RNVC: 2
521910-190227.000.0: RNCC: 3 | RNVC: 2
1271883: RNCC: 5 | RNVC: 2
22013.0.08.250.00: RNCC: 5 | RNVC: 9

10 Jul 1989

5340-12-362-6750
Access Cover

123626750
2500309-193900.000.0: RNCC: 2 | RNVC: 2
2500309-193900.000.0: RNCC: 3 | RNVC: 2

17 Mar 2004

5340-12-301-0422
Nut And Bolt Retainer

123010422
P-856017-003: RNCC: 3 | RNVC: 2
P856017-003: RNCC: 5 | RNVC: 2

19 Sep 1984

5340-12-700-9682
Angle Bracket

127009682
VG95211-ML-127009682: RNCC: 2 | RNVC: 2
3 OST1 10219-71: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-383-5568
Flush Catch

123835568
8305-0010: RNCC: 3 | RNVC: 2

8 Nov 2010

5340-12-343-0961
Mounting Bracket

123430961
5080-212: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-173-2723
Handwheel

121732723
000975-1611-0004-0000-00: RNCC: 3 | RNVC: 9

3 Apr 1978

5340-12-392-5082
Mounting Bracket

123925082
4100095-986186.006.0: RNCC: 2 | RNVC: 2
4100095-986186.006.0: RNCC: 3 | RNVC: 2

13 Jun 2013

5340-12-193-5962
Pad Eye

121935962
60080-1: RNCC: 3 | RNVC: 2

9 Aug 1982

5340-12-375-8673
Pad Eye

123758673
82439005002: RNCC: 3 | RNVC: 2
82.43900.5002: RNCC: 5 | RNVC: 2

15 Jul 2008

5340-12-309-5847
Angle Bracket

123095847
79500: RNCC: 3 | RNVC: 2

5 Feb 1987

5340-12-192-3143
Butt Hinge

121923143
42203976: RNCC: 3 | RNVC: 2
42203976KZ5511-52: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-366-6121
Access Cover

123666121
0428 0635: RNCC: 3 | RNVC: 2

12 May 2005

5340-12-331-5288
Key Blank

123315288
32.0604.1205: RNCC: 3 | RNVC: 2
0007430006: RNCC: 5 | RNVC: 2
391.012.001.002: RNCC: 5 | RNVC: 2
1001: RNCC: 5 | RNVC: 2

17 May 1993

5340-12-370-3453
Mechanic Equipment Hardware Kit

123703453
93174285: RNCC: 3 | RNVC: 2
1605986: RNCC: 5 | RNVC: 2

27 Oct 2006

5340-12-307-4011
Lock-Release Lever

123074011
43086407900: RNCC: 3 | RNVC: 2

12 Jun 1986

5340-12-354-8141
Door Button

123548141
1000-15: RNCC: 3 | RNVC: 2
704253808: RNCC: 5 | RNVC: 2
704253877: RNCC: 5 | RNVC: 9

28 Aug 2001

5340-12-332-8627
Mounting Bracket

123328627
CF 833 505 AE: RNCC: 2 | RNVC: 2
CF 833 505 AE: RNCC: 3 | RNVC: 2

28 Sep 1993

5340-12-357-3716
Catch Strike

123573716
602 0127: RNCC: 3 | RNVC: 2

13 Jun 2002

5340-12-315-6061
Loop Clamp

123156061
06791021: RNCC: 3 | RNVC: 9

11 Nov 1988

5340-12-343-4469
Electronic Equipment Hardware Kit

123434469
6050349902: RNCC: 3 | RNVC: 2
6050.3499.02: RNCC: 5 | RNVC: 2
6050 3499 02: RNCC: 5 | RNVC: 2
6050.3499.02: RNCC: 5 | RNVC: 2

23 Jun 1997

5340-12-134-8192

5340-12-314-3886
Mending Plate

123143886
024013502: RNCC: 3 | RNVC: 2

1 Jul 1988

5340-12-387-5413
Mounting Plate

123875413
40037110: RNCC: 2 | RNVC: 2
40037110: RNCC: 3 | RNVC: 2
1207627: RNCC: 3 | RNVC: 9
1207627: RNCC: 3 | RNVC: 9

6 Jan 2012

5340-12-388-0250
Mounting Bracket

123880250
5841872840: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-12-042-2492

5340-12-130-1161

5340-12-148-4083
Retaining Strap

121484083
0-12-398B13: RNCC: 3 | RNVC: 2
6090-283: RNCC: 5 | RNVC: 2
6090283: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-348-7518
Mending Plate

123487518
DIN15058-30X8: RNCC: 2 | RNVC: 2

12 Aug 1999

5340-12-307-1601
Access Door Hinge

123071601
33-1875-100000.02.0: RNCC: 3 | RNVC: 9

15 May 1986

5340-12-366-1082
Mounting Plate

123661082
2500278-190067.000.0: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-138-6130
Nonmetallic Bumper

121386130
837-28390780438-0-NBR70: RNCC: 3 | RNVC: 2
114M40007: RNCC: 3 | RNVC: 2
8390780438: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-148-2992
Helical Compression Spring Seat

121482992
1201 7899: RNCC: 3 | RNVC: 2
12017899: RNCC: 5 | RNVC: 2
30.16-032/4.4: RNCC: 5 | RNVC: 2
30.16-032/4.4: RNCC: 5 | RNVC: 9
30-16-032-4-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-1433
Loop Clamp

127011433
VG95211-ML-127011433: RNCC: 2 | RNVC: 2
5.12.0102.3013.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-317-2963
Loop Clamp

123172963
RSGU1.8001.6/15 A: RNCC: 3 | RNVC: 2
0009955501: RNCC: 5 | RNVC: 2
04518001006: RNCC: 5 | RNVC: 2
4518001006: RNCC: 5 | RNVC: 2

28 Mar 1989

5340-12-301-0043
Angle Bracket

123010043
P-296895-407: RNCC: 3 | RNVC: 2
P296895-407: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-701-3254
Rod End Connector

127013254
VG95211-ML-127013254: RNCC: 2 | RNVC: 2
5.12.5101.8620.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-357-6200
Angle Bracket

123576200
P-026618-005: RNCC: 3 | RNVC: 2
P026618-005: RNCC: 5 | RNVC: 2

8 Jul 2002

5340-12-313-1874
Electrical-Mechanical Equipment Post

123131874
P-896083-001: RNCC: 3 | RNVC: 2
P896083-001: RNCC: 5 | RNVC: 2

10 Mar 1988

5340-12-301-1199
Loop Clamp

123011199
P-856295-001: RNCC: 3 | RNVC: 2
P856295-001: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-324-4638
Electrical-Mechanical Equipment Post

123244638
VG95148C7XM4X85-ST: RNCC: 2 | RNVC: 2
VG95148C7XM4X85-ST: RNCC: 3 | RNVC: 2
963/000085-002.9: RNCC: 3 | RNVC: 2
ZDB 485: RNCC: 5 | RNVC: 2

19 Feb 1991

5340-12-354-8118
Access Cover

123548118
8262-0010: RNCC: 2 | RNVC: 2
8262-0010: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-313-0154
Double Angle Bracket

123130154
P-086147-017: RNCC: 3 | RNVC: 2
P086147-017: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-365-3732
Angle Bracket

123653732
2866-065822.000.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-357-4753
Mending Plate

123574753
A-087118-039: RNCC: 3 | RNVC: 2
A087118-039: RNCC: 5 | RNVC: 2

25 Jun 2002

5340-12-195-4437
Butt Hinge Leaf

121954437
P-296877-406: RNCC: 3 | RNVC: 2
P296877-406: RNCC: 5 | RNVC: 2

24 Feb 1983

5340-12-145-8018
Bow Handle

121458018
57-2552-00-24-0: RNCC: 3 | RNVC: 2
572552-00-24-0: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-0558
Angle Bracket

123050558
P-296885-049: RNCC: 3 | RNVC: 2
P296885-049: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-700-8439
Retaining Strap

127008439
VG95211-ML-127008439: RNCC: 2 | RNVC: 2
115N464-5: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-171-5423
Electrical-Mechanical Equipment Post

121715423
805-10-11-02-01: RNCC: 3 | RNVC: 2
0257204: RNCC: 5 | RNVC: 2
257204: RNCC: 5 | RNVC: 9

24 Oct 1977

5340-12-124-1227
Retaining Strap

121241227
DIN72571-1X4-ST-GESCHWAERZT: RNCC: 2 | RNVC: 2
DIN72571-1X4-ST-GESCHWAERZT: RNCC: 3 | RNVC: 2
1X4DIN72571STGESCHWAERZT: RNCC: 5 | RNVC: 2
1X4DIN72571STSWGEBR: RNCC: 5 | RNVC: 2
5730052: RNCC: 5 | RNVC: 2
66374: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-199-5328
Strap Fastener Loop

121995328
2300089-100106.02: RNCC: 2 | RNVC: 2
2300089-100106.02: RNCC: 3 | RNVC: 2
2300089-100106.02: RNCC: 5 | RNVC: 9
9844659: RNCC: 5 | RNVC: 9
2300089-100106-02: RNCC: 5 | RNVC: 9

9 May 1984

5340-12-343-2176
Nonmetallic Bumper

123432176
5801434-512000.02: RNCC: 2 | RNVC: 2
7800542002: RNCC: 3 | RNVC: 2
78005 42002: RNCC: 5 | RNVC: 9

21 May 1997

5340-12-171-4950
Mending Plate

121714950
81974860424: RNCC: 3 | RNVC: 2
81.97486-0424: RNCC: 5 | RNVC: 2
4757020504: RNCC: 5 | RNVC: 2

20 Oct 1977

5340-12-322-4410
Nonmetallic Bumper

123224410
8100397-200-08: RNCC: 2 | RNVC: 2
8100397-200-08: RNCC: 3 | RNVC: 2

22 Aug 1990

5340-12-338-0335
Retaining Strap

123380335
2200708: RNCC: 3 | RNVC: 2
3060/19-20,5MM: RNCC: 5 | RNVC: 2

15 May 1995

5340-12-325-9859
Mending Plate

123259859
2300348-187000.004.0: RNCC: 2 | RNVC: 2
2300348-187000.004.0: RNCC: 3 | RNVC: 2

26 Jul 1991

5340-12-152-2232
Handwheel

121522232
100278-43020.01.0: RNCC: 2 | RNVC: 2
100278-43020.01.0: RNCC: 3 | RNVC: 2
100278-43020-01-0: RNCC: 5 | RNVC: 2
100278-43020-01-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-187-0793
Spring Tension Clip

121870793
3900054-700000.04: RNCC: 2 | RNVC: 2
1742.5.16.873: RNCC: 3 | RNVC: 2
3900054-700000-04: RNCC: 5 | RNVC: 2
1742-5-16-873: RNCC: 5 | RNVC: 2
3900054-700000-04: RNCC: 5 | RNVC: 2
3900054-700000.04: RNCC: 5 | RNVC: 2

5 Mar 1981

5340-12-302-5106
Loop Clamp

123025106
DIN3016-1-D1-37X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-37X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1.37/20: RNCC: 3 | RNVC: 2
9410020037: RNCC: 5 | RNVC: 2
RSGU1100.37/20: RNCC: 5 | RNVC: 2
DIN3016-D1-37X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-D37X20-W1: RNCC: 5 | RNVC: 9

9 Jan 1985

5340-12-324-9615
Electrical-Mechanical Equipment Post

123249615
58R055-12-3: RNCC: 3 | RNVC: 2

16 Apr 1991

5340-12-322-0999
Filler Opening Cap

123220999
NO PRIMARY REF 12-322-0999: RNCC: 3 | RNVC: 2
42023173: RNCC: 5 | RNVC: 2
04080-00-061: RNCC: 5 | RNVC: 9

24 Jul 1990

5340-12-307-2439
Butt Hinge Leaf

123072439
RP988534/14: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-387-2623
Elastic Strap

123872623
CT3-319-02: RNCC: 3 | RNVC: 2

22 Nov 2011

5340-12-330-0834
Dust And Moisture Seal Protective Plug

123300834
600B1120: RNCC: 3 | RNVC: 2
GPN600B1120: RNCC: 5 | RNVC: 2
GPN600/B1120: RNCC: 5 | RNVC: 9
GPN600-B1120: RNCC: 5 | RNVC: 9

30 Oct 1992

5340-12-354-5702
Double Angle Bracket

123545702
J28130056-403: RNCC: 3 | RNVC: 2

6 Aug 2001

5340-12-358-7715
Extension Drawer Slide

123587715
DZ0301-0012: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-12-330-0820
Loop Clamp

123300820
011-321-307: RNCC: 3 | RNVC: 2
011321307: RNCC: 3 | RNVC: 2
011-321-307: RNCC: 5 | RNVC: 2

30 Oct 1992

5340-12-312-4737
Mounting Bracket

123124737
2300013-0421.01: RNCC: 2 | RNVC: 2
2300013-0421.01: RNCC: 3 | RNVC: 2
2300013-0421.01: RNCC: 5 | RNVC: 9

12 Jan 1988

5340-12-345-5091
Hand Crank

123455091
2125-129640A00C: RNCC: 2 | RNVC: 2
2125-129640A00C: RNCC: 3 | RNVC: 1

25 Mar 1998

5340-12-363-1161
Metallic Solid Wheel

123631161
5055-025230.11B: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-195-6011
Nonmetallic Bumper

121956011
1264-2311.235: RNCC: 2 | RNVC: 2
1264-2311-235: RNCC: 3 | RNVC: 2
1264-2311.235: RNCC: 3 | RNVC: 2
531139-0657.000: RNCC: 3 | RNVC: 2
1264-2311.235: RNCC: 5 | RNVC: 9
531139-0657.000: RNCC: 5 | RNVC: 9
1264-2311-235: RNCC: 5 | RNVC: 9

16 Mar 1983

5340-12-190-2639
Strap Fastener Loop

121902639
23114-4179.01: RNCC: 2 | RNVC: 2
23114-4179.01: RNCC: 3 | RNVC: 2
23114-4179-01: RNCC: 5 | RNVC: 9
23114-4179.01: RNCC: 5 | RNVC: 9
23114-4179-01: RNCC: 5 | RNVC: 9
23114-4179.01: RNCC: 5 | RNVC: 9

16 Nov 1981

5340-12-343-0186
Retaining Strap

123430186
005-001: RNCC: 3 | RNVC: 2
F300 0T 017 7903: RNCC: 6 | RNVC: 9

22 Apr 1997

5340-12-383-0115
Manual Control Handle

123830115
10127-183630.000.0: RNCC: 3 | RNVC: 2

2 Sep 2010

5340-12-321-1206
Handwheel

123211206
2.1174: RNCC: 3 | RNVC: 2
0066058: RNCC: 5 | RNVC: 2

29 Mar 1990

5340-12-315-7673
Dust And Moisture Seal Protective Cap

123157673
LN29844B16150: RNCC: 2 | RNVC: 2
LN29844 B 16150: RNCC: 5 | RNVC: 2

26 Nov 1988

5340-12-326-6611
Angle Bracket

123266611
78203 49759: RNCC: 2 | RNVC: 2
7820349759: RNCC: 3 | RNVC: 2
78203 49759: RNCC: 5 | RNVC: 9

18 Oct 1991

5340-12-358-8598
Access Cover

123588598
DVAC003: RNCC: 3 | RNVC: 2

22 Nov 2002

5340-12-300-7354
Flush Lock

123007354
3097500184: RNCC: 3 | RNVC: 2
653: RNCC: 5 | RNVC: 2

25 Aug 1984

5340-12-130-1983

5340-12-357-3759
Antipilferage Seal

123573759
0005420990: RNCC: 3 | RNVC: 2

13 Jun 2002

5340-12-143-7723
Friction Catch

121437723
5002: RNCC: 3 | RNVC: 2
0505-262: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-0459
Webbing Strap

123590459
4357927596: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-311-9698
Ball Socket Seat

123119698
162652: RNCC: 2 | RNVC: 2
162652: RNCC: 3 | RNVC: 2

5 Nov 1987

5340-12-337-9936
Mounting Bracket

123379936
4932401: RNCC: 3 | RNVC: 2
EZ49324: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-010-4299

5340-12-377-2765
Mounting Bracket

123772765
504311479: RNCC: 3 | RNVC: 2

23 Dec 2008

5340-12-372-6050
Catch Strike

123726050
239.40.703: RNCC: 3 | RNVC: 2

2 Aug 2007

5340-12-310-9218
Access Cover

123109218
78203 46410: RNCC: 2 | RNVC: 2
7820346410: RNCC: 3 | RNVC: 2
78203 46410: RNCC: 5 | RNVC: 9

9 Jul 1987

5340-12-370-5176
Mounting Bracket

123705176
7803201120AA: RNCC: 3 | RNVC: 2

16 Nov 2006

5340-12-314-9092
Retaining Strap

123149092
81738003: RNCC: 3 | RNVC: 2
8173800300: RNCC: 5 | RNVC: 2

25 Aug 1988

5340-12-185-0277
Angle Bracket

121850277
CF449254: RNCC: 3 | RNVC: 2
CF 449 254: RNCC: 5 | RNVC: 2
CF 449 254: RNCC: 5 | RNVC: 2
CF449254: RNCC: 5 | RNVC: 2

4 Sep 1980

5340-12-317-8847
Spring Loaded Cylinder Fastener

123178847
10 0014 487: RNCC: 3 | RNVC: 2

23 May 1989

5340-12-357-6205
Dust And Moisture Seal Protective Plug

123576205
2100085: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-196-4339
Casement Fastener

121964339
P-855943-003: RNCC: 3 | RNVC: 2
P855943-003: RNCC: 5 | RNVC: 2

6 Jul 1983

5340-12-349-7592
Thumb Latch

123497592
VG95211-ML-123497592: RNCC: 2 | RNVC: 2
JN0267-1: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-188-8301
Webbing Strap

121888301
2500075-199800.000.0: RNCC: 2 | RNVC: 2
2500075-199800.000.0: RNCC: 3 | RNVC: 2
2500075-199800.000.0: RNCC: 3 | RNVC: 2
2500075-199800-000-0: RNCC: 5 | RNVC: 2
2500075-199800.000.0: RNCC: 5 | RNVC: 9
2500075-199800.000.0: RNCC: 5 | RNVC: 9
2500075-199800-000-0: RNCC: 5 | RNVC: 9

3 Aug 1981

5340-12-701-7968
Angle Bracket

127017968
VG95211-ML-127017968: RNCC: 2 | RNVC: 2
5.12.8102.2550.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-190-3089
Angle Bracket

121903089
5801544-012001.006: RNCC: 3 | RNVC: 2
5801544-012001-006: RNCC: 5 | RNVC: 2
5801544-012001.006: RNCC: 5 | RNVC: 9

19 Nov 1981

5340-12-350-1688
Mounting Plate

123501688
2125-111710.01B: RNCC: 2 | RNVC: 2
2125-111710.01B: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-12-354-8574
Elastic Strap

123548574
8310-0025: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-183-5832
Angle Bracket

121835832
C100ZZ19001-000: RNCC: 3 | RNVC: 2

3 May 1980

5340-12-311-6629
Bow Handle

123116629
C42107-A393-C9: RNCC: 3 | RNVC: 2
C42107A393C9: RNCC: 5 | RNVC: 2

1 Oct 1987

5340-12-196-8327
Bail Handle

121968327
588.70-300005-000: RNCC: 3 | RNVC: 2

23 Aug 1983

5340-12-302-2993
Angle Bracket

123022993
08-033-54: RNCC: 3 | RNVC: 2
0803354: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-12-311-5458
Lock-Release Lever

123115458
00172-002-000: RNCC: 3 | RNVC: 2
LN112-16/90: RNCC: 3 | RNVC: 2
16/90 LN112: RNCC: 5 | RNVC: 2
172-02-00: RNCC: 5 | RNVC: 9

16 Sep 1987

5340-12-198-5483
Resilient Mount

121985483
DIN95363-E15X20-M5X15-NR55ST: RNCC: 2 | RNVC: 2
51500316: RNCC: 5 | RNVC: 2
515003-M5X15-NR55.ST: RNCC: 5 | RNVC: 2
51500316: RNCC: 5 | RNVC: 2
BC4.40.25N: RNCC: 5 | RNVC: 9
BC4-40-25N: RNCC: 5 | RNVC: 9
BC4.40/25N: RNCC: 5 | RNVC: 9
VG95363-E15X20-M5X15-NR55ST: RNCC: 5 | RNVC: 9
VG95363-E15X20-NR55ST-M5X15: RNCC: 5 | RNVC: 9

8 Feb 1984

5340-12-304-5653
Lock-Release Lever

123045653
6200001-007: RNCC: 2 | RNVC: 2
T61220: RNCC: 3 | RNVC: 2
6200001-007: RNCC: 5 | RNVC: 2
6200001-007: RNCC: 5 | RNVC: 2
6200001-007: RNCC: 5 | RNVC: 9

31 Jul 1985

5340-12-191-9332
Nonmetallic Bumper

121919332
C22234-A1000-C104: RNCC: 3 | RNVC: 2
C22099-A688-C833: RNCC: 5 | RNVC: 2
C22099A688C833: RNCC: 5 | RNVC: 2
C22234A1000C104: RNCC: 5 | RNVC: 2

16 Mar 1982

5340-12-307-2434
Kunst Gleitschiene

123072434
140-110000-904-0: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-317-7640
Access Cover

123177640
1000192-06 0 20300: RNCC: 2 | RNVC: 2
1000192-06 0 20300: RNCC: 3 | RNVC: 2
1000192-06 0 20300: RNCC: 5 | RNVC: 9

11 May 1989

5340-12-701-7084
Rod End Clevis

127017084
VG95211-ML-127017084: RNCC: 2 | RNVC: 2
5.12.7601.1653.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-190-0438
Helical Compression Spring Seat

121900438
2410020000: RNCC: 3 | RNVC: 2
BOSCH-EPMS138R2X: RNCC: 5 | RNVC: 2
BOSCH-EPMS138R2X: RNCC: 5 | RNVC: 2
EPMS138R2X: RNCC: 5 | RNVC: 2

4 Nov 1981

5340-12-347-8557
Mounting Bracket

123478557
480-7347-07-11-00: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-12-363-5054
Access Cover

123635054
5900101215: RNCC: 3 | RNVC: 2
5900101215-BZ: RNCC: 5 | RNVC: 2
5900101215-BZ: RNCC: 5 | RNVC: 2

23 Jun 2004

5340-12-185-7319
Dust And Moisture Seal Protective Cap

121857319
84053/2101: RNCC: 3 | RNVC: 2
84053-2101: RNCC: 5 | RNVC: 9

28 Oct 1980

5340-12-701-3087
Rod End Connector

127013087
VG95211-ML-127013087: RNCC: 2 | RNVC: 2
5.12.5101.6650.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-178-5846
Electrical-Mechanical Equipment Post

121785846
VG95148B4XM2,5X17,3-AL: RNCC: 2 | RNVC: 2
VG95148B4XM2,5X17,3-AL: RNCC: 3 | RNVC: 2
944-42-40-01: RNCC: 3 | RNVC: 2

3 May 1979

5340-12-333-5311
Webbing Strap

123335311
01155-2-01422-FE600MM-LE1000MM: RNCC: 3 | RNVC: 2
79057/029-1600-600: RNCC: 5 | RNVC: 2
01155-2-01422-FE600-LE1000: RNCC: 5 | RNVC: 2
01155-2-01422-FE=600-LE=1000: RNCC: 5 | RNVC: 2
DIN60060-2-25X600X1000-C3/SCHLAU: RNCC: 5 | RNVC: 9

3 Jan 1994

5340-12-339-5207
Mounting Bracket

123395207
1515-000220.000.0: RNCC: 3 | RNVC: 2

29 Nov 1995

5340-12-701-5500
Mounting Plate

127015500
VG95211-ML-127015500: RNCC: 2 | RNVC: 2
5.12.6113.0500.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6452
Angle Bracket

127016452
VG95211-ML-127016452: RNCC: 2 | RNVC: 2
5.12.7204.0800.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-371-4693
Angle Bracket

123714693
23302-121400.41: RNCC: 2 | RNVC: 2
23302-121400.41: RNCC: 3 | RNVC: 2
4-1641-381: RNCC: 5 | RNVC: 2
8411630: RNCC: 5 | RNVC: 2

3 Apr 2007

5340-12-364-2995
Multiple Angle Bracket

123642995
5981-183960.001.0: RNCC: 3 | RNVC: 2

8 Sep 2004

5340-12-195-7892
Angle Bracket

121957892
P-230129-225: RNCC: 3 | RNVC: 2
P230129-225: RNCC: 5 | RNVC: 2

18 Apr 1983

5340-12-701-6788
Dust And Moisture Seal Protective Cap

127016788
VG95211-ML-127016788: RNCC: 2 | RNVC: 2
5.12.7212.8020.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-164-3689
Manual Control Handle

121643689
561227: RNCC: 3 | RNVC: 2
561227: RNCC: 5 | RNVC: 2
81.3-13.1408.U45: RNCC: 5 | RNVC: 9
81-3-13-1408U45: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-1878
Access Cover

123131878
P-896401-005: RNCC: 3 | RNVC: 2
P896401-005: RNCC: 5 | RNVC: 2

10 Mar 1988

5340-12-160-1801
Retaining Strap

121601801
DIN72571-1X8-1.4571: RNCC: 2 | RNVC: 2
DIN72571-1X8-1.4571: RNCC: 3 | RNVC: 2
DIN72571-1X8-1.4571: RNCC: 3 | RNVC: 2
1X8DIN72571-1.4436WIRBELSINTERN: RNCC: 5 | RNVC: 2
1X8DIN72571-1.4436WIRBELSINTERN: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-318-8671
Sliding Stay

123188671
140-131000-901-0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-358-1760
Mounting Bracket

123581760
2500261-069060.000.0: RNCC: 2 | RNVC: 2
2500261-069060.000.0: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-12-302-8385
Support Hook

123028385
1000131-3000.01: RNCC: 2 | RNVC: 2
1582798: RNCC: 3 | RNVC: 2
49.010.30000.01D: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-322-4878
Mounting Plate

123224878
8100397-200-16: RNCC: 2 | RNVC: 2
8100397-200-16: RNCC: 3 | RNVC: 2

27 Aug 1990

5340-12-177-6192
Flush Bolt

121776192
105-23503.43: RNCC: 3 | RNVC: 2
105-23503-43: RNCC: 5 | RNVC: 2

9 Feb 1979

5340-12-304-9651
Angle Bracket

123049651
E4-2028980: RNCC: 3 | RNVC: 2
E4-2028980: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-12-165-9511
Nonmetallic Bumper

121659511
23111-3646.00: RNCC: 2 | RNVC: 2
23111-3646.00: RNCC: 3 | RNVC: 2
23111-3646.00: RNCC: 5 | RNVC: 9
23111-3646-00: RNCC: 5 | RNVC: 9

23 Jul 1976

5340-12-365-6365
Angle Bracket

123656365
J92228394-401: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-375-7736
Handle Grip

123757736
DIN98-E20-ST-POLIERT: RNCC: 2 | RNVC: 2

3 Jul 2008

5340-12-330-1332
Access Cover

123301332
C42080-A32-B25: RNCC: 2 | RNVC: 2
C42080-A32-B25: RNCC: 3 | RNVC: 2

6 Nov 1992

5340-12-187-2102
Loop Clamp

121872102
PAN4264-25: RNCC: 3 | RNVC: 2

11 Mar 1981

5340-12-176-3259
Loop Clamp

121763259
PAN4263-70: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-361-2651
Angle Bracket

123612651
51058400074: RNCC: 3 | RNVC: 2
51.05840-0074: RNCC: 5 | RNVC: 2

11 Sep 2003

5340-12-123-3796
Retaining Strap

121233796
81974010016: RNCC: 3 | RNVC: 2
00.00430-3869: RNCC: 5 | RNVC: 2
00004303869: RNCC: 5 | RNVC: 2
R3869: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-182-4733
Angle Bracket

121824733
54-2534-060-07: RNCC: 3 | RNVC: 2

6 Feb 1980

5340-12-321-7624
Door Button

123217624
5802086-25021.02: RNCC: 2 | RNVC: 2
4820399-25021.02: RNCC: 3 | RNVC: 2
5802086-25021.02: RNCC: 5 | RNVC: 2
5802086-25021.02: RNCC: 5 | RNVC: 9

22 Jun 1990

5340-12-174-6846
Resilient Mount

121746846
0118257/11MN60: RNCC: 3 | RNVC: 2
0118257.60: RNCC: 5 | RNVC: 2
0009884010: RNCC: 5 | RNVC: 2
000 988 40 10: RNCC: 5 | RNVC: 2
011825715: RNCC: 5 | RNVC: 9

19 Jul 1978

5340-12-330-3208
Webbing Strap

123303208
8100211-360000-00-01: RNCC: 2 | RNVC: 2
8100211-360000-00-01: RNCC: 3 | RNVC: 2

2 Dec 1992

5340-12-129-5767
Quick Release Plunger

121295767
R18753: RNCC: 3 | RNVC: 2
4061907: RNCC: 3 | RNVC: 2
R23311: RNCC: 5 | RNVC: 2
4061-907: RNCC: 5 | RNVC: 2
R18753: RNCC: 5 | RNVC: 9
42094-056: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-172-2231
Casement Fastener

121722231
395947794: RNCC: 3 | RNVC: 9
395947794: RNCC: 5 | RNVC: 9

3 Jan 1978

5340-12-352-4161
Mounting Bracket

123524161
T251M4002101: RNCC: 3 | RNVC: 2

17 Nov 2000

5340-12-347-2135
Mechanical Stop

123472135
54.1094.197.02: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-12-328-8806
Mending Plate

123288806
54.2892.047.04: RNCC: 3 | RNVC: 2

27 Jun 1992

5340-12-162-9999
Retaining Strap

121629999
BD70MMN346: RNCC: 3 | RNVC: 2
BD70MMN346ST: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-303-2879
Loop Clamp

123032879
B291: RNCC: 3 | RNVC: 2
2254220: RNCC: 3 | RNVC: 2

13 Mar 1985

5340-12-136-3454
Loop Clamp

121363454
269001340016: RNCC: 3 | RNVC: 2
269001340016: RNCC: 5 | RNVC: 2
490999002: RNCC: 5 | RNVC: 2
490999002: RNCC: 5 | RNVC: 9
490999002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-165-7769
Leather Strap

121657769
R16855: RNCC: 3 | RNVC: 2
R16855: RNCC: 5 | RNVC: 9

24 Jun 1976

5340-12-149-1168
Angle Bracket

121491168
521L02038: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-199-2763
Dust And Moisture Seal Protective Cap

121992763
635E02006: RNCC: 3 | RNVC: 2
635E02006F1: RNCC: 5 | RNVC: 2
635E02006F1: RNCC: 5 | RNVC: 2

7 Apr 1984

5340-12-042-5582

5340-12-137-9557

5340-12-371-6902
Door Button

123716902
5981-186212.000.0: RNCC: 2 | RNVC: 2
5981-186212.000.0: RNCC: 3 | RNVC: 2

7 May 2007

5340-12-700-7533
Mending Plate

127007533
VG95211-ML-127007533: RNCC: 2 | RNVC: 2
2-1-440 OST1 10232-71: RNCC: 3 | RNVC: 2
2-1-440 OST 1 10232-71: RNCC: 5 | RNVC: 2
0500805041509: RNCC: 5 | RNVC: 2

18 Nov 1992

5340-12-701-3613
Rod End Connector

127013613
VG95211-ML-127013613: RNCC: 2 | RNVC: 2
5.12.5111.6300.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-306-7577
Handle Grip

123067577
957-115000.02.0: RNCC: 3 | RNVC: 2
957-115000.02.0: RNCC: 5 | RNVC: 9

27 Mar 1986

5340-12-317-4908
Access Cover

123174908
1000192-02 0 31030: RNCC: 2 | RNVC: 2
1000192-02 0 31030: RNCC: 3 | RNVC: 2
1000192-02 0 31030: RNCC: 5 | RNVC: 9

13 Apr 1989

5340-12-333-8717
Rod End Clevis

123338717
404-5-13: RNCC: 3 | RNVC: 2
404-5.13: RNCC: 5 | RNVC: 2

18 Feb 1994

5340-12-349-5090
Mechanical Stop

123495090
576.999.220: RNCC: 3 | RNVC: 2
576-999-220: RNCC: 5 | RNVC: 2

24 Nov 1999

5340-12-328-9296
Mounting Plate

123289296
160-634047-10: RNCC: 3 | RNVC: 2
160-634047-10: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-183-3689
Ring

121833689
56-0049-547-00: RNCC: 3 | RNVC: 2

9 Apr 1980

5340-12-332-4883
Handle Grip

123324883
20808-064: RNCC: 3 | RNVC: 2
20808-064 GRAU: RNCC: 5 | RNVC: 2
352250030541: RNCC: 5 | RNVC: 2

16 Aug 1993

5340-12-321-8957
Metal Runner

123218957
EZ 009-3130-10: RNCC: 3 | RNVC: 2

6 Jul 1990

5340-12-700-8525
Loop Clamp

127008525
VG95211-ML-127008525: RNCC: 2 | RNVC: 2
155N1119-41: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-3170
Retaining Band

123213170
307.921-10016.00: RNCC: 3 | RNVC: 2

4 May 1990

5340-12-377-5116
Retaining Strap

123775116
4000017-188693.011: RNCC: 2 | RNVC: 2
4000017-188693.011: RNCC: 3 | RNVC: 2

21 Jan 2009

5340-12-314-4140
Mending Plate

123144140
4671425: RNCC: 3 | RNVC: 2
467.1425: RNCC: 5 | RNVC: 2
5801443-110000-002: RNCC: 5 | RNVC: 2
5801443-110000-002: RNCC: 5 | RNVC: 9

5 Jul 1988

5340-12-377-8092
Mounting Plate

123778092
4060741-150100.02: RNCC: 3 | RNVC: 2
1128707: RNCC: 5 | RNVC: 2

12 Feb 2009

5340-12-163-9806
Mending Plate

121639806
TK6092-2200-01: RNCC: 3 | RNVC: 2
2500006-2200-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-389-8644
Corner Brace

123898644
6100129-20600.001: RNCC: 2 | RNVC: 2
6000 2163: RNCC: 3 | RNVC: 2
3781173EE3130-99: RNCC: 5 | RNVC: 9
6100129-20600.001: RNCC: 5 | RNVC: 9

6 Sep 2012

5340-12-349-2846
Headless Straight Rod

123492846
J52423625-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-195-7539
Bow Handle

121957539
EUL5340-00022: RNCC: 3 | RNVC: 2

11 Apr 1983

5340-12-319-7276
Bow Handle

123197276
2300285-970101.000.0: RNCC: 2 | RNVC: 2
2300285-970101.000.0: RNCC: 3 | RNVC: 2
1275855: RNCC: 5 | RNVC: 2

30 Oct 1989

5340-12-334-3534
Mending Plate

123343534
CF 833 397 A: RNCC: 2 | RNVC: 2
CF 833 397 A: RNCC: 3 | RNVC: 2

29 Apr 1994

5340-12-388-0087
Mounting Bracket

123880087
2034325: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-345-4393
Mounting Bracket

123454393
54.0053.435.03: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-12-359-0362
Dust And Moisture Seal Protective Cap

123590362
0019885135: RNCC: 3 | RNVC: 2
0061369000: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-12-314-5433
Mending Plate

123145433
4254310098: RNCC: 3 | RNVC: 2
425 431 00 98: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-315-8647
Nonmetallic Bumper

123158647
4604281685: RNCC: 3 | RNVC: 2

3 Dec 1988

5340-12-360-6263
Access Cover

123606263
0009839727: RNCC: 3 | RNVC: 2
0009839727: RNCC: 5 | RNVC: 2

18 Jun 2003

5340-12-363-9938
Retaining Strap

123639938
700325050100: RNCC: 3 | RNVC: 2
1/2D9-50MMN325: RNCC: 5 | RNVC: 2

10 Aug 2004

5340-12-326-6214
Mounting Plate

123266214
160.19.0021: RNCC: 2 | RNVC: 2
160.19.0021: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-12-392-4111
Mounting Bracket

123924111
I005987TAN686A: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-12-366-9718
Mounting Bracket

123669718
BD5.250.863.220: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-387-9126
Angle Bracket

123879126
7093731: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-12-010-8471

5340-12-129-2285
Retaining Strap

121292285
DIN72571-1X7-ST: RNCC: 2 | RNVC: 2
DIN72571-1X7-ST: RNCC: 3 | RNVC: 2
1X7DIN72571ST: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-394-6434
Door Button

123946434
200-0453: RNCC: 3 | RNVC: 2

2 Jan 2014

5340-12-197-7695
Angle Bracket

121977695
A-145401-100: RNCC: 3 | RNVC: 2
A145401-100: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-131-7473

5340-12-359-9338
Lock Bolt

123599338
2500261-183750.004.0: RNCC: 2 | RNVC: 2
2500261-183750.004.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-376-2231
Mending Plate

123762231
5559950059: RNCC: 3 | RNVC: 2
5559950059: RNCC: 5 | RNVC: 2

28 Aug 2008

5340-12-190-9846
Expansion Shield

121909846
NA6X30: RNCC: 3 | RNVC: 2
50547: RNCC: 5 | RNVC: 2
2505471: RNCC: 5 | RNVC: 9

30 Dec 1981

5340-12-173-8443
Access Door

121738443
107802701: RNCC: 3 | RNVC: 2

16 May 1978

5340-12-354-1795
Angle Bracket

123541795
03878700: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-380-0754
Double Angle Bracket

123800754
5360781141: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-12-311-8708
Angle Bracket

123118708
2500179-197500.002.0: RNCC: 2 | RNVC: 2
2500179-197500.002.0: RNCC: 3 | RNVC: 2

26 Oct 1987

5340-12-324-6657
Strap Hinge Leaf

123246657
101-360000-906-0: RNCC: 2 | RNVC: 2
101-360000-906-0: RNCC: 5 | RNVC: 2
113/60: RNCC: 5 | RNVC: 9

13 Mar 1991

5340-12-186-8707
Stuetze

121868707
25704-001000.08.0: RNCC: 2 | RNVC: 2
25704-001000.08.0: RNCC: 3 | RNVC: 2
25704-001000-08-0: RNCC: 5 | RNVC: 2
25704-001000-08-0: RNCC: 5 | RNVC: 9

16 Feb 1981

5340-12-199-1595
Angle Bracket

121991595
23331-060000-20-0: RNCC: 2 | RNVC: 2
23331-060000-20-0: RNCC: 3 | RNVC: 2

30 Mar 1984

5340-12-187-8171
Catch Strike

121878171
2300109-970100.071.0: RNCC: 2 | RNVC: 2
2300109-970100.071.0: RNCC: 3 | RNVC: 2
2300109-970100.071.0: RNCC: 3 | RNVC: 2
2300109-970100-071-0: RNCC: 5 | RNVC: 2
2300109-970100-071-0: RNCC: 5 | RNVC: 2
2300109-970100-071-0: RNCC: 5 | RNVC: 9
2300109-970100.071.0: RNCC: 5 | RNVC: 9

13 May 1981

5340-12-185-9286
Retaining Clip

121859286
25704-289212.01.0: RNCC: 2 | RNVC: 2
25704-289212.01.0: RNCC: 3 | RNVC: 2
25704-289212-01-0: RNCC: 5 | RNVC: 9
25704-289212.01.0: RNCC: 5 | RNVC: 9
84017-03-12-01-0: RNCC: 5 | RNVC: 9
84017-03-12-01-0-2: RNCC: 5 | RNVC: 9
84017-03.12.01.0: RNCC: 5 | RNVC: 9
25704-289212-01-0: RNCC: 5 | RNVC: 9
25704-289212.01.0: RNCC: 5 | RNVC: 9

8 Nov 1980

5340-12-175-2048
Resilient Mount

121752048
155012-M8-NBR.AM-69: RNCC: 3 | RNVC: 2
5800583-094600-030: RNCC: 5 | RNVC: 2
5800583-094600.030: RNCC: 5 | RNVC: 2
835.5220 T SX2: RNCC: 5 | RNVC: 2
5220 T SX2: RNCC: 5 | RNVC: 2
VG95406-H4-8-NBR-NMST: RNCC: 5 | RNVC: 9
5220 T SX2: RNCC: 5 | RNVC: 9
5220 T-SX2: RNCC: 5 | RNVC: 9
5220TSX2: RNCC: 5 | RNVC: 9

30 Aug 1978

5340-12-326-5862
Dust And Moisture Seal Boot

123265862
1300839-009003.003: RNCC: 2 | RNVC: 2
249.613 063: RNCC: 3 | RNVC: 2

10 Oct 1991

5340-12-387-8995
Dust And Moisture Seal Boot

123878995
R900869994: RNCC: 3 | RNVC: 2
19 00 186 FIG.A-3/111: RNCC: 5 | RNVC: 2

7 Feb 2012

5340-12-199-5470
Angle Bracket

121995470
2300002-224430.000: RNCC: 2 | RNVC: 2
2300002-224430.000: RNCC: 3 | RNVC: 2
2300002-224430: RNCC: 5 | RNVC: 2
2300002-224430: RNCC: 5 | RNVC: 9

10 May 1984

5340-12-306-0932
Angle Bracket

123060932
P-295646-401: RNCC: 3 | RNVC: 2
P295646-401: RNCC: 5 | RNVC: 2

27 Jan 1986

5340-12-390-3269
Quick Release Plunger

123903269
GN611-M12-10-L: RNCC: 3 | RNVC: 2

30 Oct 2012

5340-12-305-0188
Angle Bracket

123050188
5801759-020000.002: RNCC: 2 | RNVC: 2
5801759-020000.002: RNCC: 3 | RNVC: 2
5801759-020000.002: RNCC: 5 | RNVC: 9

17 Sep 1985

5340-12-181-5462
Mounting Plate

121815462
AZ9500T113: RNCC: 3 | RNVC: 2
1200072-020120-113: RNCC: 5 | RNVC: 2
1200072-020120-113: RNCC: 5 | RNVC: 9
AZ9500T113: RNCC: 5 | RNVC: 9
1200072-020120-113: RNCC: 5 | RNVC: 9
1200072-020120.113: RNCC: 5 | RNVC: 9

30 Nov 1979

5340-12-336-9175
Loop Clamp

123369175
06678400103: RNCC: 3 | RNVC: 2
06.67840-0103: RNCC: 5 | RNVC: 2
A6MAN194: RNCC: 5 | RNVC: 2
MAN194-A6: RNCC: 5 | RNVC: 2
06.67840-0102: RNCC: 5 | RNVC: 2
A6MAN194: RNCC: 5 | RNVC: 2
MAN194-A6: RNCC: 5 | RNVC: 2

28 Dec 1994

5340-12-198-8111
Rigid Caster

121988111
25-4-1: RNCC: 3 | RNVC: 2

28 Feb 1984

5340-12-372-6723
Butt Hinge

123726723
4233: RNCC: 3 | RNVC: 2
GSV 4233: RNCC: 5 | RNVC: 2

9 Aug 2007

5340-12-381-8815
Multiple Angle Bracket

123818815
000605-203000.01: RNCC: 2 | RNVC: 2
000605-203000.01: RNCC: 3 | RNVC: 2
39122: RNCC: 5 | RNVC: 9

14 Apr 2010

5340-12-348-8930
Webbing Strap

123488930
200.0504.06.0000: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-182-0011
Dust And Moisture Seal Protective Plug

121820011
0287 4605: RNCC: 3 | RNVC: 2
2874605EE0693-60: RNCC: 5 | RNVC: 2
2874605: RNCC: 5 | RNVC: 2

4 Jan 1980

5340-12-342-1187
Webbing Strap

123421187
46177007856109: RNCC: 3 | RNVC: 2
4617700785 6109: RNCC: 5 | RNVC: 2

13 Dec 1996

5340-12-135-6834

5340-12-333-7520
Mending Plate

123337520
15 0004 409: RNCC: 2 | RNVC: 2
15 0004 409: RNCC: 3 | RNVC: 2

1 Feb 1994

5340-12-314-1248
Mending Plate

123141248
3954923241: RNCC: 3 | RNVC: 2
395 492 32 41: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-315-3018
Mounting Bracket

123153018
4222230501: RNCC: 3 | RNVC: 2
422 223 05 01: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-312-7856
Webbing Strap

123127856
4607600032: RNCC: 3 | RNVC: 2

4 Feb 1988

5340-12-323-8248
Webbing Strap

123238248
529036: RNCC: 3 | RNVC: 2
529036: RNCC: 5 | RNVC: 2
529036: RNCC: 5 | RNVC: 9

20 Dec 1990

5340-12-370-2945
Mechanical Stop

123702945
464-630730.000: RNCC: 3 | RNVC: 2
9937865: RNCC: 5 | RNVC: 2

23 Oct 2006

5340-12-377-3212
Mounting Plate

123773212
T11658: RNCC: 3 | RNVC: 2

8 Jan 2009

5340-12-306-7814
Air Inlet-Outlet Frame

123067814
5801611-711410.00: RNCC: 2 | RNVC: 2
5801611-711410.00: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-12-164-5683

5340-12-312-5906
Mending Plate

123125906
615.06-04-01-01-003: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-356-7551
Mounting Bracket

123567551
ED41-1310-00006-112: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-349-2828
Butt Hinge Leaf

123492828
J52423172-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-188-7068
Halter

121887068
3001060099: RNCC: 3 | RNVC: 2
N49-00009: RNCC: 5 | RNVC: 9

27 Jul 1981

5340-12-371-3282
Angle Bracket

123713282
5400053-366720.01: RNCC: 2 | RNVC: 2
5400053-366720.01: RNCC: 3 | RNVC: 2

15 Mar 2007

5340-12-380-9561
Spring Tension Clip

123809561
151-00700: RNCC: 3 | RNVC: 2
41118373 TEIL 41118374: RNCC: 5 | RNVC: 2
41118374: RNCC: 5 | RNVC: 2

16 Dec 2009

5340-12-311-5507
Dust And Moisture Seal Protective Cap

123115507
01212: RNCC: 3 | RNVC: 2
S23-0000.10: RNCC: 5 | RNVC: 2

16 Sep 1987

5340-12-151-4459
Electrical-Mechanical Equipment Post

121514459
23111-3602-11: RNCC: 2 | RNVC: 2
23111-3602-11: RNCC: 5 | RNVC: 2
23111-3602-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-154-8327
Loop Clamp

121548327
51.2081.042-01: RNCC: 3 | RNVC: 2
51-2081-042-01: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-192-2284
Door Button

121922284
6020305/24/25/38: RNCC: 3 | RNVC: 2
602-0319: RNCC: 5 | RNVC: 2
6020349: RNCC: 5 | RNVC: 2
N13915: RNCC: 5 | RNVC: 9

1 Apr 1982

Load More Results