What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 131 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 131 of 178

5340-12-193-3997
Retaining Strap

121933997
P-295514-017: RNCC: 3 | RNVC: 2
P295514-017: RNCC: 5 | RNVC: 2

19 Jul 1982

5340-12-310-3096
Nonmetallic Bumper

123103096
VG95092A10X2,5X18NR50: RNCC: 2 | RNVC: 2
82200-A10X2,5X18.NR50: RNCC: 3 | RNVC: 2
4.0230: RNCC: 3 | RNVC: 2
A10X2,5X18.50NR: RNCC: 5 | RNVC: 2
VG95092A10X2,5NR50: RNCC: 5 | RNVC: 2

8 May 1987

5340-12-317-6798
Loop Clamp

123176798
1000173-382192.001.0: RNCC: 2 | RNVC: 2
85023-00.92.01.0: RNCC: 3 | RNVC: 2
85023-00.92.01.0: RNCC: 5 | RNVC: 9

28 Apr 1989

5340-12-702-1263
Mounting Bracket

127021263
VG95211-ML-127021263: RNCC: 2 | RNVC: 2
30.5811.60: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-319-7902
Butt Hinge

123197902
6100125-11200.001: RNCC: 2 | RNVC: 2
4303010019: RNCC: 3 | RNVC: 2

6 Nov 1989

5340-12-325-6128
Dust And Moisture Seal Protective Cap

123256128
TKA-25-17: RNCC: 3 | RNVC: 2
0019880635: RNCC: 5 | RNVC: 2

21 Jun 1991

5340-12-331-7849
Angle Bracket

123317849
5803674-205000.03: RNCC: 2 | RNVC: 2
7804233503: RNCC: 3 | RNVC: 2
78042 33503: RNCC: 5 | RNVC: 9

22 Jun 1993

5340-12-344-1923
Double Angle Bracket

123441923
454-250700.010: RNCC: 3 | RNVC: 2
454-250700.010: RNCC: 5 | RNVC: 9
9892673: RNCC: 5 | RNVC: 9

24 Sep 1997

5340-12-389-7827
Nut And Bolt Locking Plate

123897827
82062300069: RNCC: 3 | RNVC: 2
82.06230-0069: RNCC: 5 | RNVC: 2

23 Aug 2012

5340-12-177-8119
Rod End Clevis

121778119
6900073-3000-01: RNCC: 3 | RNVC: 2
4693-0342: RNCC: 5 | RNVC: 2
206923: RNCC: 5 | RNVC: 2
6900073-3000-01: RNCC: 5 | RNVC: 9

23 Feb 1979

5340-12-329-8251
Plug Button

123298251
2911271721: RNCC: 3 | RNVC: 2
91729482: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-319-9628
Access Cover

123199628
752C05504: RNCC: 3 | RNVC: 2

23 Nov 1989

5340-12-307-2511
Quick Release Plunger

123072511
4900238-5810: RNCC: 2 | RNVC: 2

27 May 1986

5340-12-335-2285
Swivel Caster

123352285
741270501: RNCC: 3 | RNVC: 2

28 Jul 1994

5340-12-348-2765
Catch Strike

123482765
3272D: RNCC: 3 | RNVC: 2

20 May 1999

5340-12-183-2035
Nonmetallic Bumper

121832035
2837301: RNCC: 3 | RNVC: 2

25 Mar 1980

5340-12-347-8813
Exit Bolt

123478813
2995.23.69: RNCC: 2 | RNVC: 2
2995.23.69: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-12-394-6209
Bridge Clamp

123946209
0879624199: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-12-300-3119
Butt Hinge

123003119
3097401137: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-393-9543
Casement Fastener

123939543
407-9102: RNCC: 3 | RNVC: 2

24 Oct 2013

5340-12-321-0336
Access Cover

123210336
47.39.134: RNCC: 3 | RNVC: 2
03877900.643: RNCC: 5 | RNVC: 2
03877900 643: RNCC: 5 | RNVC: 2
03877900: RNCC: 5 | RNVC: 2
522.2430: RNCC: 5 | RNVC: 2

19 Mar 1990

5340-12-184-5270

5340-12-335-6761
Catch Strike

123356761
073-251250-000-0: RNCC: 2 | RNVC: 2
073-251250-000-0: RNCC: 3 | RNVC: 2

12 Sep 1994

5340-12-141-2840
Retaining Strap

121412840
DIN72571-1X4-ST-PHOSPHATIERT: RNCC: 2 | RNVC: 2
DIN72571-1X4-ST-PHOSPHATIERT: RNCC: 3 | RNVC: 2
0BE8-1X: RNCC: 3 | RNVC: 2
1X4DIN72571STPH0SPHATIERT: RNCC: 5 | RNVC: 2
1X4DIN72571STPHRE: RNCC: 5 | RNVC: 2
PN10-5: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-326-5800
Manual Control Handle

123265800
2300232-180011.000.0: RNCC: 2 | RNVC: 2
1599809: RNCC: 3 | RNVC: 2
2300232-180011.000.0: RNCC: 5 | RNVC: 2

9 Oct 1991

5340-12-342-5327
Access Door

123425327
2300421-181970.000.4: RNCC: 2 | RNVC: 2
9915643.4: RNCC: 3 | RNVC: 9
2300421-181970.000.4: RNCC: 5 | RNVC: 2
2300421-181970.000.4: RNCC: 5 | RNVC: 9

25 Feb 1997

5340-12-381-1296
Loop Clamp

123811296
6.373-334.0: RNCC: 3 | RNVC: 2

13 Jan 2010

5340-12-309-1832
Access Cover

123091832
S4-2400920: RNCC: 2 | RNVC: 2
S4-2400920: RNCC: 3 | RNVC: 2
S4-2400920: RNCC: 5 | RNVC: 9
Z3-2400920: RNCC: 5 | RNVC: 9

19 Dec 1986

5340-12-353-9538
Mounting Bracket

123539538
591212-0218.000: RNCC: 3 | RNVC: 2
591212-0218.000: RNCC: 5 | RNVC: 2
591212-0218.000: RNCC: 5 | RNVC: 9

22 May 2001

5340-12-159-8614
Expansion Shield

121598614
B28/100: RNCC: 3 | RNVC: 2
5800876-463-011: RNCC: 5 | RNVC: 2
5800876-463.011: RNCC: 5 | RNVC: 2
B28-100: RNCC: 5 | RNVC: 9
5800876-463-011: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-170-8756
Support Hook

121708756
169104001: RNCC: 3 | RNVC: 2
7101-75-107-10: RNCC: 5 | RNVC: 2
D7101-75-107-10: RNCC: 5 | RNVC: 2
D7101-75-107.10: RNCC: 5 | RNVC: 2
7101-75-107.10: RNCC: 5 | RNVC: 2
D7101-75-107-10: RNCC: 5 | RNVC: 9
D7101-75-107.10: RNCC: 5 | RNVC: 9
D169104001: RNCC: 5 | RNVC: 9
7101-75-107-10: RNCC: 5 | RNVC: 9
7101-75-107.10: RNCC: 5 | RNVC: 9

19 Aug 1977

5340-12-342-8157
Retaining Strap

123428157
DIN1593-26ZN: RNCC: 2 | RNVC: 2
DIN1593-26: RNCC: 5 | RNVC: 2
26DIN1593: RNCC: 5 | RNVC: 9

7 Apr 1997

5340-12-324-7551
Mounting Plate

123247551
6600133-411020.02: RNCC: 2 | RNVC: 2
6600133-411020.02: RNCC: 3 | RNVC: 2

21 Mar 1991

5340-12-353-8228
Access Cover

123538228
11 12 1 341 873: RNCC: 3 | RNVC: 2

14 May 2001

5340-12-377-3940
Permanent Magnet

123773940
0005434085: RNCC: 3 | RNVC: 2

14 Jan 2009

5340-12-379-6957
Mounting Plate

123796957
T521M0201217: RNCC: 3 | RNVC: 2

24 Aug 2009

5340-12-303-9909
Electrical-Mechanical Equipment Post

123039909
8450020109: RNCC: 3 | RNVC: 2
84500 20109: RNCC: 5 | RNVC: 9

29 May 1985

5340-12-308-6415
Access Cover

123086415
249-47705: RNCC: 3 | RNVC: 2

31 Oct 1986

5340-12-334-0123
Mounting Bracket

123340123
4604750140: RNCC: 3 | RNVC: 2
7013-97: RNCC: 5 | RNVC: 2
ZR04750140: RNCC: 5 | RNVC: 2

8 Mar 1994

5340-12-380-2322
Double Angle Bracket

123802322
4100036-204830.101: RNCC: 2 | RNVC: 2
4100036-204830.101: RNCC: 3 | RNVC: 2

8 Oct 2009

5340-12-349-1733
Dust And Moisture Seal Protective Cap

123491733
375014-01: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-12-198-7215
Support Hook

121987215
5801998-410000.10: RNCC: 2 | RNVC: 2
5801998-410000.10: RNCC: 3 | RNVC: 2

22 Feb 1984

5340-12-328-2492
Electrical-Mechanical Equipment Post

123282492
VG95148B6XM3X8-ST: RNCC: 2 | RNVC: 2
VG95148B6XM3X8-ST: RNCC: 3 | RNVC: 2
0801-0700: RNCC: 3 | RNVC: 2

29 Apr 1992

5340-12-173-6370
Loop Clamp

121736370
23114-2405.19: RNCC: 2 | RNVC: 2
23114-2405-19: RNCC: 3 | RNVC: 2
23114-2405-19: RNCC: 5 | RNVC: 9
23114-2405-19: RNCC: 5 | RNVC: 9

26 Apr 1978

5340-12-702-2158
Mounting Plate

127022158
VG95211-ML-127022158: RNCC: 2 | RNVC: 2
30.7222.174: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-354-3890
Double Angle Bracket

123543890
J53230660-011: RNCC: 3 | RNVC: 2

6 Jul 2001

5340-12-700-8967
Rod End Connector

127008967
VG95211-ML-127008967: RNCC: 2 | RNVC: 2
2.11.5101.8000.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-322-5788
Retaining Strap

123225788
153 300 24: RNCC: 3 | RNVC: 2
153-300-24: RNCC: 5 | RNVC: 2
153-300-02: RNCC: 5 | RNVC: 9

3 Sep 1990

5340-12-354-8347
Mounting Bracket

123548347
5400049-116822.01: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-191-3521
Pad Eye

121913521
1200079-220000.003: RNCC: 2 | RNVC: 2
009-088.220-003: RNCC: 3 | RNVC: 2
1200079-220000.003: RNCC: 5 | RNVC: 9

26 Jan 1982

5340-12-173-0650
Split Tubular Clip

121730650
4X6-1400-00: RNCC: 3 | RNVC: 2

15 Mar 1978

5340-12-329-0583
Spring Tension Clip

123290583
DIN20043-KA3-20: RNCC: 2 | RNVC: 2
150104: RNCC: 3 | RNVC: 2

15 Jul 1992

5340-12-194-6122
Headless Straight Rod

121946122
20-5160-031: RNCC: 3 | RNVC: 2

23 Nov 1982

5340-12-356-8182
Angle Bracket

123568182
ED88-0100-01001-123: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-12-361-0771
Rod End Clevis

123610771
352661: RNCC: 3 | RNVC: 2
10-0076-673: RNCC: 5 | RNVC: 2

19 Aug 2003

5340-12-300-6399
Bridge Clamp

123006399
5801997-320000.01: RNCC: 2 | RNVC: 2
5801997-320000.01: RNCC: 3 | RNVC: 2

18 Aug 1984

5340-12-387-1661
Turnbuckle

123871661
ED90-2568-00503-233: RNCC: 3 | RNVC: 2

11 Nov 2011

5340-12-363-8491
Friction Catch Housing

123638491
J53226156-003: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-178-7822
Electrical-Mechanical Equipment Post

121787822
10450-01: RNCC: 3 | RNVC: 2
477112-001: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-327-9613
Resilient Mount

123279613
DIN95363-A30X30-CR55ST: RNCC: 2 | RNVC: 2
500033-M8X20.CR55.ST: RNCC: 5 | RNVC: 2
31660/A-BSMQ5590: RNCC: 5 | RNVC: 2
1087040: RNCC: 5 | RNVC: 2
1087040: RNCC: 5 | RNVC: 9
VG95363-A30X30-CR55ST: RNCC: 5 | RNVC: 9

24 Mar 1992

5340-12-197-6743
Mending Plate

121976743
P-296874-057: RNCC: 3 | RNVC: 2
P296874-057: RNCC: 5 | RNVC: 2

14 Nov 1983

5340-12-304-5503
Door Button

123045503
NO PRIMARY REF 12-304-5503: RNCC: 3 | RNVC: 2
6901 157192: RNCC: 5 | RNVC: 9

30 Jul 1985

5340-12-302-9360
Plain Solid Disk

123029360
23182-0140.28: RNCC: 2 | RNVC: 2
23182-0140.28: RNCC: 3 | RNVC: 2

8 Feb 1985

5340-12-199-8148
Angle Bracket

121998148
869-150000-00-0: RNCC: 3 | RNVC: 2
869-150000-00-0: RNCC: 5 | RNVC: 9

2 Jun 1984

5340-12-701-6455
Angle Bracket

127016455
VG95211-ML-127016455: RNCC: 2 | RNVC: 2
5.12.7204.0870.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-194-3742
Loop Clamp

121943742
DIN3016-1-E2-20-20-20X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU0.3X20/15: RNCC: 3 | RNVC: 2
DIN3016-E2-20-20-20X15-W1-2: RNCC: 3 | RNVC: 2
4209315020: RNCC: 5 | RNVC: 2
RSGU3X20-15: RNCC: 5 | RNVC: 2
RSGU3X20/15: RNCC: 5 | RNVC: 2
DIN3016-E2-20-20-20X15-W1-2: RNCC: 5 | RNVC: 9

27 Oct 1982

5340-12-328-9556
Retaining Clip

123289556
105-072-045-1: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-701-2711
Mounting Bracket

127012711
VG95211-ML-127012711: RNCC: 2 | RNVC: 2
5.12.4805.8004.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-306-3098
Mending Plate

123063098
421-112060.06.3: RNCC: 3 | RNVC: 2
421-112060-06-3: RNCC: 5 | RNVC: 2

18 Feb 1986

5340-12-321-7922
Metal Runner

123217922
P-886716-001: RNCC: 3 | RNVC: 2
P886716-001: RNCC: 5 | RNVC: 2

27 Jun 1990

5340-12-336-7238
Dust And Moisture Seal Protective Plug

123367238
HP-006-6-73-KU: RNCC: 3 | RNVC: 2
HP006-6-73-KU: RNCC: 5 | RNVC: 2
HP006-6-73: RNCC: 5 | RNVC: 9

14 Dec 1994

5340-12-189-6020
Spring Tension Clip

121896020
P-895300-423: RNCC: 3 | RNVC: 2
P895300-423: RNCC: 5 | RNVC: 2

7 Oct 1981

5340-12-320-3822
Helical Compression Spring Retainer

123203822
4900059-751521.005.0: RNCC: 3 | RNVC: 2
1229362: RNCC: 5 | RNVC: 2

9 Jan 1990

5340-12-343-4645
Retaining Bail

123434645
8 697 620 266: RNCC: 3 | RNVC: 2

24 Jun 1997

5340-12-393-3389
Rod End Connector

123933389
1030105-206120.002.0: RNCC: 3 | RNVC: 2

10 Sep 2013

5340-12-702-3691
Mounting Bracket

127023691
VG95211-ML-127023691: RNCC: 2 | RNVC: 2
5.12.0602.2115.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-343-9855
Dust And Moisture Seal Protective Cap

123439855
WI 0610 G 005: RNCC: 3 | RNVC: 2
WI 0610 G 005-4: RNCC: 5 | RNVC: 2
52984: RNCC: 5 | RNVC: 2

22 Aug 1997

5340-12-344-5881
Mounting Bracket

123445881
2500255-193542.000.0: RNCC: 2 | RNVC: 2
2500255-193542.000.0: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-12-329-4614
Mending Plate

123294614
A-616777-011: RNCC: 3 | RNVC: 2
A616777-011: RNCC: 5 | RNVC: 2

21 Aug 1992

5340-12-368-1373
Split Tubular Clip

123681373
VR-A11-0018-001: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-374-8583
Butt Hinge

123748583
2 0003-025: RNCC: 3 | RNVC: 2
2 0003-025: RNCC: 5 | RNVC: 2

1 Apr 2008

5340-12-190-2320
Manual Control Handle

121902320
DIN99-N125-PHOSPHATIERT: RNCC: 2 | RNVC: 2
N125DIN99ST37PHOSPHATIERT: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-702-1812
Angle Bracket

127021812
VG95211-ML-127021812: RNCC: 2 | RNVC: 2
30.7204.292: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-315-6625
Mending Plate

123156625
512214-0413.000: RNCC: 3 | RNVC: 2
512214-0413: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-393-6260
Handle Grip

123936260
11.02670-0009: RNCC: 3 | RNVC: 2
026.02.002: RNCC: 5 | RNVC: 2
11.02670-0009: RNCC: 5 | RNVC: 2

27 Sep 2013

5340-12-701-6392
Mounting Plate

127016392
VG95211-ML-127016392: RNCC: 2 | RNVC: 2
5.12.7070.8001.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-189-7698
Hand Crank

121897698
VG85087-A-175X14-AM: RNCC: 2 | RNVC: 2
VG85087-A-175X14-AM: RNCC: 3 | RNVC: 2
VG85087-A-175X14-AM: RNCC: 3 | RNVC: 2
VG85087-A-175X14-AM: RNCC: 3 | RNVC: 9
A175X14VG85087GCUSN5ZNPB: RNCC: 5 | RNVC: 9
A175X14VG85087-RG5: RNCC: 5 | RNVC: 9
A175X14VG85087RG5: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-310-6381
Dust And Moisture Seal Protective Cap

123106381
605/8 75GRAU: RNCC: 3 | RNVC: 2
M5NR.605GRAU: RNCC: 3 | RNVC: 2
605/SW-8 M5: RNCC: 5 | RNVC: 2

11 Jun 1987

5340-12-380-0172
Loop Clamp

123800172
DIN3016-2-G1-22X12-W1-2-CR: RNCC: 2 | RNVC: 2

18 Sep 2009

5340-12-340-2192
Dust And Moisture Seal Protective Plug

123402192
2653-011000.17: RNCC: 2 | RNVC: 2
2653-011000.17: RNCC: 3 | RNVC: 2
2653-011000.17: RNCC: 5 | RNVC: 2

15 Mar 1996

5340-12-196-4893
Mending Plate

121964893
5801435-040000.03: RNCC: 2 | RNVC: 2
5801435-040000.03: RNCC: 3 | RNVC: 2
5801435-040000-03: RNCC: 5 | RNVC: 2

12 Jul 1983

5340-12-173-4518
Spring Tension Clip

121734518
23176-261730.02.0: RNCC: 2 | RNVC: 2
23176-261730.02.0: RNCC: 3 | RNVC: 2
23176-261730-02-0: RNCC: 5 | RNVC: 2
23176-261730.02.0: RNCC: 5 | RNVC: 9
23176-261730-02-0: RNCC: 5 | RNVC: 9
23176-261730.02.0: RNCC: 5 | RNVC: 9

18 Apr 1978

5340-12-326-4367
Filler Opening Cap

123264367
DIN73400-DV60-G: RNCC: 2 | RNVC: 2
DIN73400DV60G: RNCC: 5 | RNVC: 2
DV60GDIN73400: RNCC: 5 | RNVC: 2

16 Sep 1991

5340-12-355-4552
Retaining Strap

123554552
7 570 04 00 F: RNCC: 2 | RNVC: 2
7 570 04 00 F: RNCC: 3 | RNVC: 2
9134: RNCC: 5 | RNVC: 2
75700400F: RNCC: 5 | RNVC: 2

16 Nov 2001

5340-12-169-0176
Leather Strap

121690176
WW310348B: RNCC: 3 | RNVC: 2
WW310348B: RNCC: 5 | RNVC: 2
WW 310 348 B: RNCC: 5 | RNVC: 2
WW310348B: RNCC: 5 | RNVC: 2
WW 310 348 B: RNCC: 5 | RNVC: 2

14 Apr 1977

5340-12-393-0264
Mounting Bracket

123930264
1030105-259000.019.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-393-0210
Metal Grille

123930210
1030105-182332.000.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-386-1857
Loop Clamp

123861857
120D010300.004.0: RNCC: 2 | RNVC: 2
120D010300.004.0: RNCC: 3 | RNVC: 2

15 Aug 2011

5340-12-354-0129
Dust And Moisture Seal Protective Plug

123540129
350 I 14: RNCC: 3 | RNVC: 2
350I14: RNCC: 5 | RNVC: 2
GPN350I14: RNCC: 5 | RNVC: 2

28 May 2001

5340-12-341-5525
Dust And Moisture Seal Protective Cap

123415525
0001-151000-902-0: RNCC: 3 | RNVC: 2
0001-151000-902-0: RNCC: 5 | RNVC: 9

19 Sep 1996

5340-12-310-5690
Catch Strike

123105690
8450048404: RNCC: 3 | RNVC: 2
84500 48404: RNCC: 5 | RNVC: 9

3 Jun 1987

5340-12-388-9679
Rod Retainer Clip

123889679
200-3601.03: RNCC: 3 | RNVC: 2

10 May 2012

5340-12-360-2030
Ball Socket Seat

123602030
7966.30.01: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-348-6678
Mechanical Stop

123486678
122503: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-178-7094
Nut And Bolt Locking Plate

121787094
8709940532: RNCC: 2 | RNVC: 2
8709940532: RNCC: 3 | RNVC: 2

14 May 1979

5340-12-170-2510
Section Block Clamp

121702510
PAN4271-10: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-162-5367
Resilient Mount

121625367
845-4-0745-056: RNCC: 3 | RNVC: 2
006.00/MBS55-00: RNCC: 3 | RNVC: 9
8406282: RNCC: 5 | RNVC: 2
64070029: RNCC: 5 | RNVC: 2
0745-056: RNCC: 5 | RNVC: 2
0745056: RNCC: 5 | RNVC: 2
006-00: RNCC: 5 | RNVC: 9
006.00.P1-9: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-0460
Mounting Bracket

123210460
2300269-200500.000.0: RNCC: 2 | RNVC: 2
790-57.00.000-25: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-12-701-9429
Rod End Clevis

127019429
VG95211-ML-127019429: RNCC: 2 | RNVC: 2
5.12.0246.0019.05: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-149-1177
Angle Bracket

121491177
521L02026: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-328-6621
Resilient Mount

123286621
H24-112-31-39-10-M: RNCC: 3 | RNVC: 2
C3695 845 -3: RNCC: 5 | RNVC: 2
C3695 845 -3: RNCC: 5 | RNVC: 2
C 3695 845 -3: RNCC: 5 | RNVC: 2
H24-112-31-39-10 M: RNCC: 5 | RNVC: 2
C 3695 845 -3: RNCC: 5 | RNVC: 2

12 Jun 1992

5340-12-300-6418
Angle Bracket

123006418
4900059-323460.000.0: RNCC: 3 | RNVC: 2
4900059-323460-000-0: RNCC: 5 | RNVC: 2

18 Aug 1984

5340-12-344-6232
Webbing Strap

123446232
704-125161-000-0: RNCC: 3 | RNVC: 2

17 Nov 1997

5340-12-158-0121
Mending Plate

121580121
23305-206410.04.0: RNCC: 2 | RNVC: 2
23305-206410.04.0: RNCC: 3 | RNVC: 2
23305-206410-04-0: RNCC: 5 | RNVC: 2
23305-206410-04-0: RNCC: 5 | RNVC: 9
23305-206410.04.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-192-8490
Butt Hinge

121928490
8-4210.05: RNCC: 2 | RNVC: 2
8-4210.05: RNCC: 3 | RNVC: 2
8-4210-05: RNCC: 5 | RNVC: 9
8-4210.05: RNCC: 5 | RNVC: 9
8-4210.05: RNCC: 5 | RNVC: 9

27 May 1982

5340-12-329-8748
Rod End Clevis

123298748
VG95211-ML-123298748: RNCC: 2 | RNVC: 2
160-88707-01: RNCC: 3 | RNVC: 2
160-88707-01: RNCC: 5 | RNVC: 9

8 Oct 1992

5340-12-320-3314
Pad Eye

123203314
160-82602-04: RNCC: 3 | RNVC: 2
160-82602.04: RNCC: 5 | RNVC: 2
160-82602.04: RNCC: 5 | RNVC: 9

4 Jan 1990

5340-12-343-2939
Catch Strike

123432939
13-SK-LT1-20043: RNCC: 2 | RNVC: 2
13-SK-LT1-20043: RNCC: 3 | RNVC: 2

3 Jun 1997

5340-12-162-4302
Rod End Connector

121624302
5800359-010330-02: RNCC: 3 | RNVC: 2
5800359-010330.02: RNCC: 5 | RNVC: 9
5800359-010330-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-375-2648
Lock Key

123752648
09 012 702: RNCC: 3 | RNVC: 2
81.97118-0022: RNCC: 5 | RNVC: 2
81971180022: RNCC: 5 | RNVC: 2

13 May 2008

5340-12-390-5252
Bumper

123905252
81414016037: RNCC: 3 | RNVC: 2
81.41401-6037: RNCC: 5 | RNVC: 2

20 Nov 2012

5340-12-336-9852
Webbing Strap

123369852
2500246-981021.00: RNCC: 2 | RNVC: 2
2768.01-1021.00: RNCC: 3 | RNVC: 2
2500246-981021.00: RNCC: 5 | RNVC: 2

5 Jan 1995

5340-12-198-1762
Bridge Clamp

121981762
5801999-210000.02: RNCC: 3 | RNVC: 2

27 Dec 1983

5340-12-317-2481
Mounting Plate

123172481
53407-001: RNCC: 3 | RNVC: 2
53 407-001: RNCC: 5 | RNVC: 9

21 Mar 1989

5340-12-340-4096
Mounting Bracket

123404096
6700019-201400.04: RNCC: 2 | RNVC: 2
6700019-201400.04: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-12-326-7829
Webbing Strap

123267829
902982-101: RNCC: 3 | RNVC: 2

24 Oct 1991

5340-12-151-6196
Resilient Mount

121516196
95103701: RNCC: 3 | RNVC: 2
BR4.21.75A-AMAGNETISCH: RNCC: 3 | RNVC: 9
811.080.BR4.21/75AAMAGNETISCH: RNCC: 5 | RNVC: 2
521G03703: RNCC: 5 | RNVC: 2
521G03703D1: RNCC: 5 | RNVC: 2
BR4-21-75AAMAGNETISCH: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-145-1353
Nonmetallic Bumper

121451353
167404101: RNCC: 3 | RNVC: 2
03499496: RNCC: 3 | RNVC: 2
845-E7101-72-131.10: RNCC: 5 | RNVC: 2
3499496KZ7101-72: RNCC: 5 | RNVC: 2
7101-72-131-10: RNCC: 5 | RNVC: 2
7101-72-131.10: RNCC: 5 | RNVC: 2
7101-72-131-10: RNCC: 5 | RNVC: 9
7101-72-131.10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-348-9108
Dust And Moisture Seal Protective Plug

123489108
245/9713-03-00-05: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-134-8586
Turnbuckle Body

121348586
DIN1479-SPM6-ST-PHOSPHATIERT: RNCC: 2 | RNVC: 2
SP-DIN1479-M6-PHOSPHATIERT: RNCC: 3 | RNVC: 2
M6DIN1479PHRE: RNCC: 5 | RNVC: 2
SPM6DIN1479PH0SPHATIERT: RNCC: 5 | RNVC: 2
M6DIN1479PH0SPHATIERT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-312-5915
Mending Plate

123125915
615.06-10-00-00-016: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-172-3184
Loop Clamp

121723184
SCH1216-TRANSPARENT: RNCC: 3 | RNVC: 2
SCH1216: RNCC: 5 | RNVC: 2
60016: RNCC: 5 | RNVC: 2
2600161: RNCC: 5 | RNVC: 9

10 Jan 1978

5340-12-323-5735
Mounting Bracket

123235735
160-82091-03: RNCC: 3 | RNVC: 2
160-82091.03: RNCC: 5 | RNVC: 2
160-82091-03: RNCC: 5 | RNVC: 2
160-82091.03: RNCC: 5 | RNVC: 9

7 Dec 1990

5340-12-184-7778
Mending Plate

121847778
5801505-3131.006: RNCC: 3 | RNVC: 2
5801505-3131-006: RNCC: 5 | RNVC: 2

16 Aug 1980

5340-12-180-1136
Angle Bracket

121801136
221-40122-05: RNCC: 3 | RNVC: 2

20 Aug 1979

5340-12-373-1635
Block Clamp

123731635
RAP12-110: RNCC: 3 | RNVC: 2
RAP12-110: RNCC: 5 | RNVC: 2

5 Oct 2007

5340-12-304-6953
Expansion Plug

123046953
1410555005: RNCC: 3 | RNVC: 2
01308371EY0141-17: RNCC: 5 | RNVC: 2
0130 8371: RNCC: 5 | RNVC: 2

13 Aug 1985

5340-12-352-3639
Dust And Moisture Seal Protective Cap

123523639
250/14RAL3000: RNCC: 3 | RNVC: 2
GPN250/14R0UGE: RNCC: 5 | RNVC: 2
GPN250/14ROUGE: RNCC: 5 | RNVC: 2
250/14ROUGE: RNCC: 5 | RNVC: 2
GPN250/14RAL3000: RNCC: 5 | RNVC: 9
250/14 ROT: RNCC: 5 | RNVC: 9

10 Nov 2000

5340-12-307-2765
Loop Clamp

123072765
B25/12/10BX80TAN15836: RNCC: 3 | RNVC: 2
B25/12/10BX80TAN15836: RNCC: 3 | RNVC: 2
B25-12-10BX80TAN15836: RNCC: 5 | RNVC: 2
B25-12-10BX80TAN15836: RNCC: 5 | RNVC: 2

28 May 1986

5340-12-311-2578
Angle Bracket

123112578
48444-001: RNCC: 3 | RNVC: 2
48 444-001: RNCC: 5 | RNVC: 9

11 Aug 1987

5340-12-344-9054
Mounting Bracket

123449054
58R137-13141-1: RNCC: 2 | RNVC: 2
58R137-13141-1: RNCC: 3 | RNVC: 2

9 Jan 1998

5340-12-156-8391
Webbing Strap

121568391
2329-5515.00: RNCC: 2 | RNVC: 2
2329-5515-00: RNCC: 5 | RNVC: 9
000-A2-25X2,0X325-PE-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-343-7266
Bow Handle

123437266
5L.3731.001.79: RNCC: 3 | RNVC: 2
5L.3731.001.79: RNCC: 3 | RNVC: 2
5L3731-001-79: RNCC: 5 | RNVC: 2

17 Jul 1997

5340-12-381-8205
Loop Clamp

123818205
DIN3015-LB-L1R-12-PA-W1: RNCC: 2 | RNVC: 2

7 Apr 2010

5340-12-321-9884
Resilient Mount

123219884
DIN95363-A30X15-NR70ST: RNCC: 2 | RNVC: 2
781070HART: RNCC: 5 | RNVC: 2
500030-M8X20.NR70.ST: RNCC: 5 | RNVC: 2
VG95363-A30X15-NR70ST: RNCC: 5 | RNVC: 9

16 Jul 1990

5340-12-311-9344
Mending Plate

123119344
288144877: RNCC: 3 | RNVC: 2
3501-100.01.00.005-000: RNCC: 5 | RNVC: 2

30 Oct 1987

5340-12-701-8556
Loop Clamp

127018556
VG95211-ML-127018556: RNCC: 2 | RNVC: 2
5891A-6: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-9181
Access Hole Frame

123219181
FAAB008: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-12-370-1413
Webbing Strap

123701413
864063801: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-12-386-9401
Spring Loaded Cylinder Fastener

123869401
EH2212.005: RNCC: 3 | RNVC: 2
X00026909: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-12-381-2359
Loop Clamp

123812359
SP-325-PP-IS-M-W10: RNCC: 3 | RNVC: 2

25 Jan 2010

5340-12-360-0911
Access Door Hinge

123600911
2500261-183740.002.0: RNCC: 2 | RNVC: 2
2500261-183740.002.0: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-188-2778
Rod End Connector

121882778
32464-01: RNCC: 3 | RNVC: 2
32464 01: RNCC: 5 | RNVC: 2
32464-01: RNCC: 5 | RNVC: 2

24 Jun 1981

5340-12-187-0293
Resilient Mount

121870293
3093100777: RNCC: 3 | RNVC: 2

25 Feb 1981

5340-12-701-6734
Blank Panel

127016734
VG95211-ML-127016734: RNCC: 2 | RNVC: 2
5.12.7211.2540.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-381-0660
Bumper

123810660
403861-03: RNCC: 3 | RNVC: 2

7 Jan 2010

5340-12-320-8275
Electrical-Mechanical Equipment Post

123208275
2654-330122.02: RNCC: 2 | RNVC: 2
2654-330122.02: RNCC: 3 | RNVC: 2
679-00240000.02: RNCC: 5 | RNVC: 9
679-00240000.02: RNCC: 5 | RNVC: 9
2654-330 122.02: RNCC: 5 | RNVC: 9

21 Feb 1990

5340-12-365-1299
Mounting Plate

123651299
536077-0521.000: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-12-169-2036
Friction Catch Stud

121692036
WW411293C: RNCC: 3 | RNVC: 2
WW411293C: RNCC: 5 | RNVC: 2
WW 411 293 C: RNCC: 5 | RNVC: 2
WW411293C: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-386-1421
Access Cover

123861421
2500262-737100.000.0: RNCC: 2 | RNVC: 2
2500262-737100.000.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-381-1790
Mounting Plate

123811790
1030056-400430.003.0: RNCC: 3 | RNVC: 2

18 Jan 2010

5340-12-363-5138
Swivel Caster

123635138
L-VLE250K: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-328-9739
Rod End Clevis

123289739
2300232-972020.002.0: RNCC: 2 | RNVC: 2
2300232-972020.002.0: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-179-6961
Angle Bracket

121796961
4402950095: RNCC: 3 | RNVC: 2

20 Jul 1979

5340-12-360-0048
Mounting Bracket

123600048
9414752740: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-371-3531
Mending Plate

123713531
1216 6086: RNCC: 3 | RNVC: 2
12166086: RNCC: 5 | RNVC: 9

20 Mar 2007

5340-12-353-2052
Bow Handle

123532052
AFG0702135: RNCC: 3 | RNVC: 2

9 Feb 2001

5340-12-307-2393
Electrical-Mechanical Equipment Post

123072393
6063602: RNCC: 3 | RNVC: 2

23 May 1986

5340-12-198-3413
Case Corner

121983413
5802017-704900.00: RNCC: 2 | RNVC: 2
5802017-704900.00: RNCC: 3 | RNVC: 2
5802017-704900.00: RNCC: 3 | RNVC: 2
5802017-704900.00: RNCC: 5 | RNVC: 9
5802017-704900.00: RNCC: 5 | RNVC: 9

18 Jan 1984

5340-12-377-1957
Bumper

123771957
300709: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-326-1175
Mounting Bracket

123261175
M-28-009-04.0/02: RNCC: 3 | RNVC: 2

9 Aug 1991

5340-12-332-5565
Webbing Strap

123325565
01802-1-2100MM: RNCC: 3 | RNVC: 2
01802-1 LE=2100: RNCC: 5 | RNVC: 2
79036-2100: RNCC: 5 | RNVC: 2
DIN60060-1-25X2100-C1: RNCC: 5 | RNVC: 9

19 Aug 1993

5340-12-701-9238
Loop Clamp

127019238
TKSCH-6-12-5,5 D16AT-AN GOST 17-: RNCC: 3 | RNVC: 1

6 Feb 1995

5340-12-317-3086
Lock-Release Lever

123173086
GN100-18-M8-SW: RNCC: 3 | RNVC: 2
2441.224: RNCC: 3 | RNVC: 2
RBN942-E18XM8 SCHWARZ: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-323-3040
Electrical-Mechanical Equipment Post

123233040
VG95148B4XM2,5X25-ST: RNCC: 2 | RNVC: 2
5.02.253: RNCC: 3 | RNVC: 2

13 Nov 1990

5340-12-701-2301
Mounting Plate

127012301
VG95211-ML-127012301: RNCC: 2 | RNVC: 2
5.12.2016.5140.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-375-6019
Spring Loaded Cylinder Fastener

123756019
GN717-4-BK: RNCC: 3 | RNVC: 2

17 Jun 2008

5340-12-196-8558
Dust And Moisture Seal Protective Cap

121968558
025-8636-038: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-12-358-2044
Manual Control Handle

123582044
2500262-192200.005.0: RNCC: 2 | RNVC: 2
2500262-192200.005.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-325-7900
Mechanic Equipment Hardware Kit

123257900
5801984-208000.000.0: RNCC: 2 | RNVC: 2
5801984-208000.000.0: RNCC: 3 | RNVC: 2

10 Jul 1991

5340-12-325-3826
Retaining Strap

123253826
050H3801-01: RNCC: 3 | RNVC: 2

31 May 1991

5340-12-353-6869
Multiple Angle Bracket

123536869
J92222373-401: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-375-0487
Double Angle Bracket

123750487
20000-025: RNCC: 3 | RNVC: 2
20000-025: RNCC: 5 | RNVC: 2

16 Apr 2008

5340-12-310-0094
Angle Bracket

123100094
1361013-51020.02: RNCC: 3 | RNVC: 2
1361013-51020-02: RNCC: 5 | RNVC: 2

27 Mar 1987

5340-12-174-2912
Flexible Surface Mechanical Patch

121742912
7-403-0071: RNCC: 3 | RNVC: 2

21 Jun 1978

5340-12-390-0830
Mounting Plate

123900830
F1.1697-00-01-19.00-00: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-12-188-7894
Hinge Torsion Bar

121887894
VG95211-ML-121887894: RNCC: 2 | RNVC: 2
024-150410-01-0: RNCC: 3 | RNVC: 2

29 Jul 1981

5340-12-330-0366
Loop Clamp

123300366
DIN3015-L-KP-5-R-20-PA6: RNCC: 2 | RNVC: 2
RANR-535: RNCC: 3 | RNVC: 2
535PA: RNCC: 3 | RNVC: 2
RANR-535: RNCC: 5 | RNVC: 2
DIN3015-L-KP-5-R-20-PA: RNCC: 5 | RNVC: 2
1920767: RNCC: 5 | RNVC: 2
8414198: RNCC: 5 | RNVC: 2

24 Oct 1992

5340-12-181-5765
Retaining Strap

121815765
5800748-833.003: RNCC: 3 | RNVC: 2
5800748-833-003: RNCC: 5 | RNVC: 9
5800748-833-003: RNCC: 5 | RNVC: 9

3 Dec 1979

5340-12-198-3581
Nonmetallic Bumper

121983581
409.078374: RNCC: 3 | RNVC: 2
409.078374MB-4.00: RNCC: 5 | RNVC: 2
409-078374: RNCC: 5 | RNVC: 2
409.078374: RNCC: 5 | RNVC: 9

19 Jan 1984

5340-12-184-7486
Clamping Catch

121847486
2360-262111.00.0: RNCC: 2 | RNVC: 2
2360-262111.00.0: RNCC: 3 | RNVC: 2
2360-262111-00-0: RNCC: 5 | RNVC: 2
2360-262111.00.0: RNCC: 5 | RNVC: 2
2360-262111-00-0: RNCC: 5 | RNVC: 9
2360-262111.00.0: RNCC: 5 | RNVC: 9

14 Aug 1980

5340-12-173-8540
Retaining Strap

121738540
P-296652-003: RNCC: 3 | RNVC: 2
P296652-003: RNCC: 5 | RNVC: 2

17 May 1978

5340-12-342-0120
Webbing Strap

123420120
08.1207-001.2/00: RNCC: 3 | RNVC: 2
08-1207-0012: RNCC: 5 | RNVC: 2
08/1207-001.2: RNCC: 5 | RNVC: 2

29 Nov 1996

5340-12-197-3590
Handwheel

121973590
E801-00-2-2-G-ALMG3: RNCC: 3 | RNVC: 2

17 Oct 1983

5340-12-195-5187
Electrical-Mechanical Equipment Post

121955187
VG95148B7XM4X25-1.0711A2P: RNCC: 2 | RNVC: 2
VG95148B7XM4X25-1.0711A2P: RNCC: 3 | RNVC: 2
M4X25STVZK: RNCC: 3 | RNVC: 2
808400.6: RNCC: 5 | RNVC: 2
VG95148B7XM4X25-1.0711: RNCC: 5 | RNVC: 2

8 Mar 1983

5340-12-702-1897
Mounting Bracket

127021897
VG95211-ML-127021897: RNCC: 2 | RNVC: 2
30.7209.145: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-356-1235
Access Cover

123561235
2339-150030A06B: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-326-8188
Double Angle Bracket

123268188
9977005-507: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-12-340-0897
Loop Clamp

123400897
V6530-00003-042: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-186-1452
Electrical-Mechanical Equipment Post

121861452
512206-0310.000: RNCC: 3 | RNVC: 2
512206-0310: RNCC: 5 | RNVC: 2
512206-0310-000: RNCC: 5 | RNVC: 2

2 Dec 1980

5340-12-311-0980
Angle Bracket

123110980
5801357-1400.17: RNCC: 2 | RNVC: 2
5801357-1400.17: RNCC: 3 | RNVC: 2
5801357-1400.17: RNCC: 5 | RNVC: 9

27 Jul 1987

5340-12-157-4462
Angle Bracket

121574462
51-2403-000-09: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-365-7557
Rigid Caster

123657557
NLM95024-150401: RNCC: 3 | RNVC: 2

1 Feb 2005

5340-12-320-7446
Access Cover

123207446
T01-5116A000D: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-12-196-4791
Mending Plate

121964791
12729-12310.001: RNCC: 2 | RNVC: 2
12729-12310.001: RNCC: 3 | RNVC: 2
12729-12310-001: RNCC: 5 | RNVC: 2

11 Jul 1983

5340-12-319-8740
Access Door

123198740
731.02.132: RNCC: 3 | RNVC: 2
V731.02.132: RNCC: 5 | RNVC: 2
731-B02-505: RNCC: 5 | RNVC: 2

14 Nov 1989

5340-12-393-5016
Dust And Moisture Seal Protective Cap-Plug

123935016
160-72085-08: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-353-7179
Mounting Plate

123537179
J92224223-001: RNCC: 3 | RNVC: 2

2 May 2001

5340-12-318-8488
Shimmy Damper

123188488
1700013-31800.00: RNCC: 2 | RNVC: 2
297327: RNCC: 3 | RNVC: 2
1700013-31800.00: RNCC: 5 | RNVC: 9

22 Aug 1989

5340-12-180-6654
Plain Solid Disk

121806654
0287 3963: RNCC: 3 | RNVC: 2
2873963EE0704-01: RNCC: 5 | RNVC: 2
2873963: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-343-1174
Manual Control Handle

123431174
1280-074: RNCC: 3 | RNVC: 2

2 May 1997

5340-12-309-2281
Detent Plunger

123092281
P-896318-001: RNCC: 3 | RNVC: 2
P896318-001: RNCC: 5 | RNVC: 2

29 Dec 1986

5340-12-316-4484
Mounting Bracket

123164484
P-026782-021: RNCC: 3 | RNVC: 2
P026782-021: RNCC: 5 | RNVC: 2

18 Jan 1989

5340-12-700-3367
Compression Cup

127003367
51-170371044: RNCC: 2 | RNVC: 2
20-11-71: RNCC: 3 | RNVC: 2

27 Jan 1992

5340-12-092-2646

5340-12-093-6648

5340-12-330-8903
Nonmetallic Bumper

123308903
2718-300000.001.0: RNCC: 2 | RNVC: 2
2718-300000.001.0: RNCC: 3 | RNVC: 2

19 Feb 1993

5340-12-313-6715
Dust And Moisture Seal Protective Cap-Plug Set

123136715
9121750294: RNCC: 3 | RNVC: 2

23 Apr 1988

5340-12-136-0117
Nonmetallic Bumper

121360117
111119189: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-360-1280
Double Angle Bracket

123601280
9418857814: RNCC: 3 | RNVC: 2

9 Apr 2003

5340-12-312-6716
Nonmetallic Bumper

123126716
837.051373: RNCC: 3 | RNVC: 2
1051373: RNCC: 3 | RNVC: 2
1-1013-8-4: RNCC: 5 | RNVC: 2
051373: RNCC: 5 | RNVC: 9

26 Jan 1988

5340-12-303-0337
Angle Bracket

123030337
1123862: RNCC: 3 | RNVC: 2
1-2000-36-4: RNCC: 5 | RNVC: 2
123862: RNCC: 5 | RNVC: 9

21 Feb 1985

5340-12-322-5757
Angle Bracket

123225757
MEM10-1154P1: RNCC: 3 | RNVC: 2

3 Sep 1990

5340-12-326-1315
Door Handle

123261315
2300232-182100.013.0: RNCC: 2 | RNVC: 2
2300232-182100.013.0: RNCC: 3 | RNVC: 2

12 Aug 1991

5340-12-187-4618
Retaining Strap

121874618
2300109-060000.030.0: RNCC: 2 | RNVC: 2
2300109-060000.030.0: RNCC: 3 | RNVC: 2
2300109-060000.030.0: RNCC: 3 | RNVC: 2
2300109-060000-030-0: RNCC: 5 | RNVC: 9
2300109-060000-030-0: RNCC: 5 | RNVC: 9
2300109-060000-030-0: RNCC: 5 | RNVC: 9
2300109-060000.030.0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-146-8727
Loop Clamp

121468727
15C: RNCC: 3 | RNVC: 2
25704-350000T183: RNCC: 5 | RNVC: 2
211-15150: RNCC: 5 | RNVC: 2
25704-350000T183: RNCC: 5 | RNVC: 9
202012901: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-320-7736
Bow Handle

123207736
R1-12.253.04: RNCC: 3 | RNVC: 2

15 Feb 1990

5340-12-360-2691
Mounting Bracket

123602691
J92222433-403: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-12-310-1747
Ball Socket Seat

123101747
DIN71805-A13-ZNPHG3F: RNCC: 2 | RNVC: 2
DIN71805-A13-ZNPHG3F: RNCC: 3 | RNVC: 2
071805013101: RNCC: 5 | RNVC: 2

14 Apr 1987

5340-12-372-0368
Nut And Bolt Head Protective Cap

123720368
SW16-4-G10 PE BLACK: RNCC: 3 | RNVC: 2
SW16-4-G10 PE SCHWARZ: RNCC: 5 | RNVC: 2

13 Jun 2007

5340-12-391-4983
Loop Clamp

123914983
DIN3015-LE-3R-20-PP-W5: RNCC: 2 | RNVC: 2

14 Mar 2013

5340-12-301-8564
Resilient Mount

123018564
2500135-190000.547.0: RNCC: 2 | RNVC: 2
2500135-190000.547.0: RNCC: 3 | RNVC: 2

14 Nov 1984

5340-12-196-4897
Double Angle Bracket

121964897
23114-4149.01: RNCC: 2 | RNVC: 2
23114-4149.01: RNCC: 3 | RNVC: 2
23114-4149-01: RNCC: 5 | RNVC: 9
23114-4149.01: RNCC: 5 | RNVC: 9
23114-4149-01: RNCC: 5 | RNVC: 9

12 Jul 1983

5340-12-171-7674
Electrical-Mechanical Equipment Post

121717674
NO PRIMARY REF 12-171-7674: RNCC: 3 | RNVC: 2
81.27505-0004: RNCC: 5 | RNVC: 2
81275050004: RNCC: 5 | RNVC: 2
1040-12-00-014-08: RNCC: 5 | RNVC: 2
1040-12-00-014-08: RNCC: 5 | RNVC: 9

11 Nov 1977

5340-12-700-8555
Loop Clamp

127008555
VG95211-ML-127008555: RNCC: 2 | RNVC: 2
155N1119-661: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-391-6318
Rim Latch

123916318
3102-0006: RNCC: 3 | RNVC: 2

22 Mar 2013

5340-12-385-6603
Bow Handle

123856603
170077: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-12-182-8761
Clamping Catch

121828761
PAN5113B: RNCC: 3 | RNVC: 2

4 Mar 1980

5340-12-393-7181
Manual Control Handle

123937181
9199483: RNCC: 3 | RNVC: 2

7 Oct 2013

5340-12-315-2148
Schlosz Schluessel

123152148
L30460X83X: RNCC: 3 | RNVC: 2

4 Oct 1988

5340-12-310-6956
Strap Fastener Loop

123106956
020245: RNCC: 3 | RNVC: 2

22 Jun 1987

5340-12-361-4706
Mounting Bracket

123614706
2500262-749000.003.0: RNCC: 2 | RNVC: 2
2500262-749000.003.0: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-388-6129
Mounting Plate

123886129
122W167200.010.0: RNCC: 2 | RNVC: 2
122W167200.010.0: RNCC: 3 | RNVC: 2
122W167200.010.0: RNCC: 5 | RNVC: 9

4 Apr 2012

5340-12-381-9747
Angle Bracket

123819747
10186-180010.002.0: RNCC: 2 | RNVC: 2
10186-180010.002.0: RNCC: 3 | RNVC: 2

22 Apr 2010

5340-12-393-6107
Mounting Bracket

123936107
4100098-982410.003.0: RNCC: 2 | RNVC: 2
4100098-982410.003.0: RNCC: 3 | RNVC: 2

26 Sep 2013

5340-12-381-9087
Spring Loaded Cylinder Fastener

123819087
000605-204700.00: RNCC: 2 | RNVC: 2

16 Apr 2010

5340-12-179-2705
Nonmetallic Bumper

121792705
823823499: RNCC: 3 | RNVC: 2
823823499: RNCC: 5 | RNVC: 2

20 Jun 1979

5340-12-338-8585
Mounting Bracket

123388585
2300232-826220.000.0: RNCC: 2 | RNVC: 2
2300232-826220.000.0: RNCC: 3 | RNVC: 2
1270753: RNCC: 5 | RNVC: 2

31 Aug 1995

5340-12-129-0059

5340-12-130-5338

5340-12-164-5137

5340-12-180-1051
Nonmetallic Bumper

121801051
4042410013: RNCC: 3 | RNVC: 2

20 Aug 1979

5340-12-373-8974
Access Cover

123738974
TA3014P015: RNCC: 3 | RNVC: 2

17 Dec 2007

5340-12-372-5361
Rod Retainer Clip

123725361
L524M2001213: RNCC: 3 | RNVC: 2

26 Jul 2007

5340-12-090-6247

5340-12-126-5152

5340-12-187-7310
Clamping Catch

121877310
2322OSNT130-280EN30-0: RNCC: 3 | RNVC: 2
32630-12000: RNCC: 5 | RNVC: 2
2322OSNT/133-280: RNCC: 5 | RNVC: 2

4 May 1981

5340-12-341-8834
Butt Hinge

123418834
DIN7956-70X2-30-AL-BK-U-50: RNCC: 2 | RNVC: 2
DIN7956-70X2X6X50AL: RNCC: 5 | RNVC: 2
C70X2X50DIN7956-AL: RNCC: 5 | RNVC: 2

12 Nov 1996

5340-12-390-2257
Mounting Bracket

123902257
2300559-038000.009.0: RNCC: 2 | RNVC: 2
2300559-038000.009.0: RNCC: 3 | RNVC: 2

18 Oct 2012

5340-12-164-8935
Loop Clamp

121648935
F10TAN15802-1-4544-9: RNCC: 3 | RNVC: 2
F10TAN15802N: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-5174
Mending Plate

123055174
2300124-184300.004.0: RNCC: 2 | RNVC: 2
2300124-184300.004.0: RNCC: 3 | RNVC: 2
2300124-184300.004.0: RNCC: 3 | RNVC: 2
2300124-184300.004.0: RNCC: 5 | RNVC: 9

18 Nov 1985

5340-12-198-5613
Lock-Release Lever

121985613
5800043-1010: RNCC: 2 | RNVC: 2
5800043-1010: RNCC: 3 | RNVC: 2
4319584: RNCC: 3 | RNVC: 2
C 7000 124: RNCC: 5 | RNVC: 2
C 7000 124: RNCC: 5 | RNVC: 2
5800043-1010: RNCC: 5 | RNVC: 9
5800043-1010.00: RNCC: 5 | RNVC: 9
5800043-1010.00: RNCC: 5 | RNVC: 9

9 Feb 1984

5340-12-192-8008
Spring Tension Clip

121928008
SK4423-4: RNCC: 3 | RNVC: 2
100100069901/024: RNCC: 3 | RNVC: 2
1742 005 2: RNCC: 5 | RNVC: 2
SK4423-4: RNCC: 5 | RNVC: 9

25 May 1982

5340-12-175-7958
Access Cover

121757958
81614460010: RNCC: 3 | RNVC: 2
23230-062103-001-0: RNCC: 5 | RNVC: 9
23230-062103.001.0: RNCC: 5 | RNVC: 9

18 Oct 1978

5340-12-337-0830
Lock-Release Lever

123370830
GN220-M16-75: RNCC: 3 | RNVC: 2

18 Jan 1995

5340-12-315-5798
Angle Bracket

123155798
512214-3150.000: RNCC: 3 | RNVC: 2
512214-3150: RNCC: 5 | RNVC: 2

10 Nov 1988

5340-12-348-0078
Retaining Strap

123480078
51974400126: RNCC: 3 | RNVC: 2
51.97440-0126: RNCC: 5 | RNVC: 2

25 Mar 1999

5340-12-350-0837
Mounting Plate

123500837
2125-111100.17B: RNCC: 2 | RNVC: 2
2125-111100.17B: RNCC: 3 | RNVC: 2

14 Feb 2000

5340-12-358-7960
Mounting Bracket

123587960
J0433105D127-001A0-055: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-174-4440
Dust And Moisture Seal Protective Plug

121744440
12113: RNCC: 3 | RNVC: 2
731.42.018: RNCC: 5 | RNVC: 2
1162770EF8975-65: RNCC: 5 | RNVC: 2
1162770: RNCC: 5 | RNVC: 2
0260812: RNCC: 5 | RNVC: 2
02-1724: RNCC: 5 | RNVC: 2
V731.42.018: RNCC: 5 | RNVC: 2
01162770: RNCC: 5 | RNVC: 2
260812: RNCC: 5 | RNVC: 9

29 Jun 1978

5340-12-384-8262
Mounting Bracket

123848262
F1.1189-40-10-10.00-25: RNCC: 3 | RNVC: 2

1 Apr 2011

5340-12-170-3090
Dust And Moisture Seal Protective Cap

121703090
PAN3860-05: RNCC: 3 | RNVC: 2

7 Jul 1977

5340-12-157-9375
Angle Bracket

121579375
AZ0148515: RNCC: 3 | RNVC: 2
GZ11-30: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-347-6030
Mounting Bracket

123476030
8854 131-101: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-388-7716
Angle Bracket

123887716
601253-201700.01: RNCC: 2 | RNVC: 2
601253-201700.01: RNCC: 3 | RNVC: 2

20 Apr 2012

5340-12-364-7782
Strap Fastener Loop

123647782
2339-010470A06B: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-347-6023
Mounting Bracket

123476023
8854 130-131: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-386-4426
Aircraft Latch Hook

123864426
V6520-06871-225: RNCC: 3 | RNVC: 2

1 Sep 2011

5340-12-331-6117
Mending Plate

123316117
480-7345-07-00-03: RNCC: 3 | RNVC: 2
480/7345-07-00-03: RNCC: 5 | RNVC: 2

28 May 1993

5340-12-329-8743
Tee Hinge

123298743
160-82171: RNCC: 3 | RNVC: 2
15160-82171: RNCC: 5 | RNVC: 2
160-82171: RNCC: 5 | RNVC: 9

8 Oct 1992

5340-12-185-1673
Rigid Caster

121851673
106-200-009: RNCC: 3 | RNVC: 2

18 Sep 1980

5340-12-179-1285
Mounting Bracket

121791285
5801215-0-092: RNCC: 3 | RNVC: 2
5801215-0.092: RNCC: 5 | RNVC: 2

8 Jun 1979

5340-12-310-2541
Loop Clamp

123102541
DIN3015-Z-KP-3-R-25-25-PA6: RNCC: 2 | RNVC: 2
HRZ3KP25-25PA: RNCC: 3 | RNVC: 2
RBN-325: RNCC: 3 | RNVC: 2
RBN-325: RNCC: 3 | RNVC: 2
DIN3015-Z-KP-3-R-25-25-PA: RNCC: 5 | RNVC: 2
DIN3015-ZKP3R-25-25PA: RNCC: 5 | RNVC: 2
DIN3015-ZKPR3-25-25PA: RNCC: 5 | RNVC: 2
RBN325: RNCC: 5 | RNVC: 2
VG95961KL3-25-25-PA: RNCC: 5 | RNVC: 9

28 Apr 1987

5340-12-172-6655
Catch Strike

121726655
1224-317.17: RNCC: 2 | RNVC: 2
532008-247: RNCC: 3 | RNVC: 2
532008-0247.000: RNCC: 3 | RNVC: 2
532008-0247.000: RNCC: 5 | RNVC: 2
532008-247: RNCC: 5 | RNVC: 2
1224-317-17: RNCC: 5 | RNVC: 9
1224-317.17: RNCC: 5 | RNVC: 9

8 Feb 1978

5340-12-182-1496
Angle Bracket

121821496
5800823-041-002: RNCC: 3 | RNVC: 2
5800823-041.002: RNCC: 5 | RNVC: 2
5800823-041-002: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-321-1354
Lock-Release Lever

123211354
4609/60-21.03: RNCC: 3 | RNVC: 2
4607-2300.03: RNCC: 5 | RNVC: 9

2 Apr 1990

5340-12-151-0574
Bow Handle

121510574
5800359-010300-01: RNCC: 3 | RNVC: 2
5800359-010300-01: RNCC: 5 | RNVC: 9
5800359-010300.01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-333-3084
Spacing Threaded Standoff

123333084
1203 4319: RNCC: 3 | RNVC: 2
12034319ED0111-90: RNCC: 5 | RNVC: 2
3.602.0.360.002.4: RNCC: 5 | RNVC: 9
1203 4319: RNCC: 5 | RNVC: 9
12034319: RNCC: 5 | RNVC: 9

23 Nov 1993

5340-12-309-1212
Handle Grip

123091212
7107/9-3A: RNCC: 3 | RNVC: 2

16 Dec 1986

5340-12-306-6633
Mending Plate

123066633
704-144100-910-0: RNCC: 3 | RNVC: 2
704-144100-910-0: RNCC: 5 | RNVC: 9

19 Mar 1986

5340-12-393-7694
Angle Bracket

123937694
SK1121-187719.001.0: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-701-2739
Mounting Plate

127012739
VG95211-ML-127012739: RNCC: 2 | RNVC: 2
5.12.4806.3103.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-1316
Plain Solid Disk

123421316
1052-0124: RNCC: 3 | RNVC: 2
078353250: RNCC: 5 | RNVC: 2

17 Dec 1996

5340-12-305-1217
Strap Fastener Loop

123051217
AFG-07-225-00-00-00: RNCC: 3 | RNVC: 2
AFG016127: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-306-0865
Retaining Clip

123060865
C22165-A1000-C903: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-334-8145
Mounting Bracket

123348145
774-071-40/05: RNCC: 3 | RNVC: 2

23 Jun 1994

5340-12-151-0502
Resilient Mount

121510502
DIN95363-A50X45-M10X34-NR65ST: RNCC: 2 | RNVC: 2
500045-M10X34.NR65.ST: RNCC: 5 | RNVC: 2
27797/A-BSTN6590: RNCC: 5 | RNVC: 2
27797BSTN 6590: RNCC: 5 | RNVC: 2
27797BSTN6590: RNCC: 5 | RNVC: 2
27797SM650: RNCC: 5 | RNVC: 2
27797,NR65ST: RNCC: 5 | RNVC: 2
E1214-15-18: RNCC: 5 | RNVC: 9
VG95363-A50X45-M10X34-NR65ST: RNCC: 5 | RNVC: 9
VG95363-A50X45-NR65ST-M10X34: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-195-8574
Electrical-Mechanical Equipment Post

121958574
250148-190000.50.0: RNCC: 2 | RNVC: 2
250148-190000.50.0: RNCC: 3 | RNVC: 2
250148-190000-50-0: RNCC: 5 | RNVC: 2

25 Apr 1983

5340-12-701-9030
Loop Clamp

127019030
VG95211-ML-127019030: RNCC: 2 | RNVC: 2
N1119-585: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-331-9607
Webbing Strap

123319607
01802-2-SCHLAUFE-FE1600-LE600: RNCC: 3 | RNVC: 2
01802-2-FE=1600-LE=600: RNCC: 5 | RNVC: 2
01802-2-FE1600-LE600: RNCC: 5 | RNVC: 2
01802-2-FE1600MM-LE600MM: RNCC: 5 | RNVC: 2
01802-2-SCHLAUFE-FE1600-LE600MM: RNCC: 5 | RNVC: 2
79036/SCHLAUFE-2200-600: RNCC: 5 | RNVC: 2
DIN60060-2-25X1600X600-C1/SCHLAU: RNCC: 5 | RNVC: 9

9 Jul 1993

5340-12-361-3350
Expansion Plug

123613350
51916060090: RNCC: 3 | RNVC: 2
51.91606-0090: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-170-5068
Rod End Clevis

121705068
81954900078: RNCC: 3 | RNVC: 2
0501 310 063: RNCC: 3 | RNVC: 2
1238323008: RNCC: 5 | RNVC: 2
91117453: RNCC: 5 | RNVC: 2
3619960201: RNCC: 5 | RNVC: 2
81.95490-0038: RNCC: 5 | RNVC: 9
81.95490-0078: RNCC: 5 | RNVC: 9
1238323008: RNCC: 5 | RNVC: 9
81954900038: RNCC: 5 | RNVC: 9
0501310063: RNCC: 5 | RNVC: 9

18 Jul 1977

5340-12-171-6659
Dust And Moisture Seal Protective Cap

121716659
200Z6X10: RNCC: 3 | RNVC: 2
GPN200Z6X10: RNCC: 5 | RNVC: 2
GPN200-Z6X10: RNCC: 5 | RNVC: 2
GPN200Z6X10: RNCC: 5 | RNVC: 2
Z6X10GPN200: RNCC: 5 | RNVC: 9
200061000: RNCC: 5 | RNVC: 9
GPN200,Z6X10: RNCC: 5 | RNVC: 9
Z6X10: RNCC: 5 | RNVC: 9

3 Nov 1977

5340-12-194-0649
Caster Frame

121940649
160-24200-54: RNCC: 3 | RNVC: 2
160-24200-54: RNCC: 5 | RNVC: 2
160-24200.54: RNCC: 5 | RNVC: 2
160-24200.54: RNCC: 5 | RNVC: 9

28 Sep 1982

5340-12-362-2777
Mounting Bracket

123622777
0316525190: RNCC: 3 | RNVC: 2
3KK888: RNCC: 5 | RNVC: 2
03.165.25.19.0: RNCC: 5 | RNVC: 9

2 Feb 2004

5340-12-394-3871
Spring Tension Clip

123943871
0636800000: RNCC: 3 | RNVC: 2
FM 5/TS35: RNCC: 5 | RNVC: 2
286-4238: RNCC: 5 | RNVC: 2
286-4238: RNCC: 5 | RNVC: 2

27 Nov 2013

5340-12-366-8758
Mounting Bracket

123668758
S252M3111210: RNCC: 3 | RNVC: 2

18 Jun 2005

5340-12-361-5722
Rigid Caster

123615722
B-POEV 125R: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-12-321-7659
Dust And Moisture Seal Protective Plug

123217659
700M42X2: RNCC: 3 | RNVC: 2
779008577: RNCC: 5 | RNVC: 2
700M42X200: RNCC: 5 | RNVC: 2
GPN700,M42X2 FORM A: RNCC: 5 | RNVC: 9

25 Jun 1990

5340-12-345-7101
Manual Control Lever

123457101
2300211-991460.000.0: RNCC: 2 | RNVC: 2
2300211-991460.000.0: RNCC: 3 | RNVC: 2

17 Apr 1998

5340-12-381-1490
Webbing Strap

123811490
6.373-943.0: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-12-192-8947
Escutcheon Plate

121928947
4606890162: RNCC: 3 | RNVC: 2
46068901627007: RNCC: 5 | RNVC: 2
721 1 87 035 1: RNCC: 5 | RNVC: 9

3 Jun 1982

5340-12-365-2300
Access Cover

123652300
2500075-560560.000.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-300-2051
Butt Hinge Leaf

123002051
CF 482 432 A: RNCC: 3 | RNVC: 2
CF 482 432 A: RNCC: 5 | RNVC: 2

14 Jul 1984

5340-12-181-2500
Double Angle Bracket

121812500
WG 301 317 B: RNCC: 3 | RNVC: 9
WG 301 317 B: RNCC: 5 | RNVC: 2
WG301317B: RNCC: 5 | RNVC: 9
WG301317B: RNCC: 5 | RNVC: 9

7 Nov 1979

5340-12-301-3752
Dust And Moisture Seal Protective Cap-Plug

123013752
127.130.6: RNCC: 3 | RNVC: 2
2501656229: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-12-304-9742
Nonmetallic Bumper

123049742
0009877140: RNCC: 3 | RNVC: 2

12 Sep 1985

5340-12-377-5954
Hand Crank

123775954
BHAA037: RNCC: 3 | RNVC: 2

28 Jan 2009

5340-12-323-4770
Webbing Strap

123234770
7156801: RNCC: 3 | RNVC: 2

29 Nov 1990

5340-12-390-8462
Access Cover

123908462
3002047: RNCC: 3 | RNVC: 2
D-UK3-MSTB: RNCC: 5 | RNVC: 2
0035310381: RNCC: 5 | RNVC: 2

19 Dec 2012

5340-12-390-2959
Lock-Release Lever

123902959
9999261-391200.004.0: RNCC: 3 | RNVC: 2

26 Oct 2012

5340-12-390-7189
Corrosion Preventive Anode

123907189
9-41067-07-10: RNCC: 3 | RNVC: 2

6 Dec 2012

5340-12-328-9742
Door Button

123289742
2300232-182010.002.0: RNCC: 2 | RNVC: 2
2300232-182010.002.0: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-198-5566
Resilient Mount

121985566
BM4. 40.27A: RNCC: 3 | RNVC: 9
7-125-1811: RNCC: 5 | RNVC: 2
BM4.40 27A: RNCC: 5 | RNVC: 2
2751-002: RNCC: 5 | RNVC: 2
BM4-40-27A: RNCC: 5 | RNVC: 9

9 Feb 1984

5340-12-154-1684
Mending Plate

121541684
65-7058-640-06: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-306-7987
Lock-Release Lever

123067987
1865-020221.00.0: RNCC: 3 | RNVC: 9

3 Apr 1986

5340-12-346-0199
Tee Hinge

123460199
KNUERR-2.313.370.9: RNCC: 3 | RNVC: 2

29 May 1998

5340-12-125-0803
Dust And Moisture Seal Protective Cap-Plug

121250803
STOPFEN12X8-5X17MM: RNCC: 3 | RNVC: 2
8402390: RNCC: 5 | RNVC: 2
0039-076: RNCC: 5 | RNVC: 2
0039076: RNCC: 5 | RNVC: 2
ST0PFEN12X8-5X17MM: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-321-4068
Flush Lock

123214068
01-610: RNCC: 3 | RNVC: 2
01-610 FH: RNCC: 5 | RNVC: 2
01610: RNCC: 5 | RNVC: 9
01-610 2D: RNCC: 5 | RNVC: 9

16 May 1990

5340-12-303-6265
Spring Tension Clip

123036265
35 016: RNCC: 3 | RNVC: 2
35016: RNCC: 5 | RNVC: 2
35-016: RNCC: 5 | RNVC: 2

15 Apr 1985

5340-12-308-8672
Nonmetallic Bumper

123088672
1119015: RNCC: 3 | RNVC: 2
1119-015: RNCC: 5 | RNVC: 9

24 Nov 1986

5340-12-356-5089
Mounting Bracket

123565089
J92224244-403: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-307-2324
Retaining Strap

123072324
140-251100-902-0: RNCC: 3 | RNVC: 2

23 May 1986

5340-12-700-8564
Loop Clamp

127008564
VG95211-ML-127008564: RNCC: 2 | RNVC: 2
155N1119-674: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-145-3371
Retaining Strap

121453371
X11-11J16: RNCC: 3 | RNVC: 2
10300216: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-166-0469
Handle Grip

121660469
100429-32031-01-0: RNCC: 2 | RNVC: 2
100429-32031-01-0: RNCC: 3 | RNVC: 2
100429-32031-01-0: RNCC: 5 | RNVC: 9

29 Jul 1976

5340-12-305-8025
Webbing Strap

123058025
DAN80-1-120: RNCC: 3 | RNVC: 2

16 Dec 1985

5340-12-186-4268
Mounting Bracket

121864268
1000093-31000.04.0: RNCC: 2 | RNVC: 2
1000093-31000.04.0: RNCC: 3 | RNVC: 2
1000093-31000-04-0: RNCC: 5 | RNVC: 9
1000093-31000-04-0: RNCC: 5 | RNVC: 9
1000093-31000.04.0: RNCC: 5 | RNVC: 9

30 Dec 1980

5340-12-343-2932
Mounting Plate

123432932
9997006-241080.000.0: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-12-353-9058
Lock-Release Lever

123539058
GN99.6-63-M8: RNCC: 3 | RNVC: 2

17 May 2001

5340-12-198-1427
Angle Bracket

121981427
5801999-100000.08: RNCC: 2 | RNVC: 2
2-03.008: RNCC: 3 | RNVC: 2
5801999-100000.08: RNCC: 3 | RNVC: 2
5801999-100000.08: RNCC: 3 | RNVC: 2
5801999-100000.08: RNCC: 5 | RNVC: 2
5801999-100000.08: RNCC: 5 | RNVC: 9

22 Dec 1983

5340-12-192-5093
Electrical-Mechanical Equipment Post

121925093
P-895904-001: RNCC: 3 | RNVC: 2
P895904-001: RNCC: 5 | RNVC: 2

29 Apr 1982

5340-12-174-9382
Catch Strike

121749382
81613402152: RNCC: 3 | RNVC: 2
23230-052600-008-0: RNCC: 5 | RNVC: 9
23230-052600.008.0: RNCC: 5 | RNVC: 9

9 Aug 1978

5340-12-332-3200
Retaining Band

123323200
TK5340-005-2: RNCC: 2 | RNVC: 2
SPANNBAND BW KS 6: RNCC: 3 | RNVC: 2
TK-BA35-5340-489: RNCC: 5 | RNVC: 2
TK-E59C-5340-030-2: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-12-387-9608
Webbing Strap

123879608
TL5340-0009-B: RNCC: 2 | RNVC: 2

13 Feb 2012

5340-12-325-9935
Lock-Release Lever

123259935
451-363000-904-0: RNCC: 3 | RNVC: 2

29 Jul 1991

5340-12-701-7387
Mounting Bracket

127017387
VG95211-ML-127017387: RNCC: 2 | RNVC: 2
5.12.7611.0011.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5535
Angle Bracket

127025535
VG95211-ML-127025535: RNCC: 2 | RNVC: 2
5.51.7220.0333.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-180-3896
Dust And Moisture Seal Protective Cap

121803896
1480522006: RNCC: 3 | RNVC: 2
1 480 522 006: RNCC: 5 | RNVC: 2
81.52136-0007: RNCC: 5 | RNVC: 2
81521360007: RNCC: 5 | RNVC: 2
0014310187: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-12-365-3354
Helical Compression Spring Seat

123653354
4603240315: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-320-6601
Dust And Moisture Seal Protective Cap

123206601
61311351249: RNCC: 3 | RNVC: 2
1351249: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-363-6210
Metal Grille

123636210
1873-055130.000.0: RNCC: 3 | RNVC: 2

9 Jul 2004

5340-12-182-1464
Mounting Bracket

121821464
4582974: RNCC: 3 | RNVC: 2
5801505-209000-003: RNCC: 5 | RNVC: 2
5801505-209000-003: RNCC: 5 | RNVC: 9
5801505-209000.003: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-317-0748
Detent Plunger

123170748
136-040.37-024: RNCC: 3 | RNVC: 2

9 Mar 1989

5340-12-369-3717
Nut And Bolt Retainer

123693717
A70-0004.001-003: RNCC: 3 | RNVC: 2

27 Jun 2006

5340-12-349-1802
Nonmetallic Bumper

123491802
6L.4994.001.00-1/4INCH: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-12-349-5886
Nonmetallic Bumper

123495886
3975: RNCC: 3 | RNVC: 2

7 Dec 1999

5340-12-094-4735

5340-12-309-3037
Plug Button

123093037
135F62014: RNCC: 3 | RNVC: 2
135F62014E1: RNCC: 5 | RNVC: 2
135F62014E1: RNCC: 5 | RNVC: 2

13 Jan 1987

5340-12-359-2482
Mounting Bracket

123592482
13774901: RNCC: 3 | RNVC: 2

15 Jan 2003

5340-12-359-5558
Spacing Threaded Standoff

123595558
CBD45310P06: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-12-303-2379
Nonmetallic Bumper

123032379
4900059-211230.001.0: RNCC: 3 | RNVC: 2

8 Mar 1985

5340-12-147-7150
Loop Clamp

121477150
100078-830: RNCC: 2 | RNVC: 2
100078-830: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-702-4220
Angle Bracket

127024220
VG95211-ML-127024220: RNCC: 2 | RNVC: 2
5.12.7205.1008.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-171-9891
Extension Drawer Slide

121719891
66-3506-405-00A001: RNCC: 3 | RNVC: 2
497865: RNCC: 5 | RNVC: 2

8 Dec 1977

5340-12-327-2134
Runner

123272134
5803702-100000.01: RNCC: 2 | RNVC: 2
7802180101: RNCC: 3 | RNVC: 2
78021 80101: RNCC: 5 | RNVC: 9

17 Dec 1991

5340-12-181-6313
Nonmetallic Solid Wheel

121816313
303-100-0190-014: RNCC: 3 | RNVC: 2
34-5080-104: RNCC: 5 | RNVC: 2

10 Dec 1979

5340-12-701-8471
Loop Clamp

127018471
VG95211-ML-127018471: RNCC: 2 | RNVC: 2
5156A-28: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-8551
Loop Clamp

127018551
VG95211-ML-127018551: RNCC: 2 | RNVC: 2
5891A-16: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-145-0912
Rod End Clevis

121450912
1201 8557: RNCC: 3 | RNVC: 2
12018557: RNCC: 5 | RNVC: 2
A26.13-415.4: RNCC: 5 | RNVC: 2
A26-13-415-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-7452
Mounting Bracket

127017452
VG95211-ML-127017452: RNCC: 2 | RNVC: 2
5.12.7614.1190.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-329-5067
Mounting Bracket

123295067
2500229-001210.000.0: RNCC: 2 | RNVC: 2
2500229-001210.000.0: RNCC: 3 | RNVC: 2
2500229-001210.000.0: RNCC: 5 | RNVC: 2

26 Aug 1992

5340-12-358-2039
Butt Hinge Leaf

123582039
2500262-190900.004.0: RNCC: 2 | RNVC: 2
2500262-190900.004.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-702-5346
Angle Bracket

127025346
VG95211-ML-127025346: RNCC: 2 | RNVC: 2
5.51.7204.0306.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-357-7959
Access Cover

123577959
1530-020000.005.0: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-12-193-9604
Manual Control Handle

121939604
GN310-8-80-A: RNCC: 3 | RNVC: 2
A8X80GN310: RNCC: 5 | RNVC: 2

20 Sep 1982

5340-12-701-6790
Dust And Moisture Seal Protective Cap

127016790
VG95211-ML-127016790: RNCC: 2 | RNVC: 2
5.12.7212.8020.94: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-3833
Rod End Connector

127023833
VG95211-ML-127023833: RNCC: 2 | RNVC: 2
5.12.5101.8860.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-179-9884
Nut And Bolt Locking Plate

121799884
351-002-623120-012-0: RNCC: 2 | RNVC: 2
103-250-0044-000: RNCC: 3 | RNVC: 2
351-002-623120-012-0: RNCC: 5 | RNVC: 9

17 Aug 1979

5340-12-308-4836
Loop Clamp

123084836
2300223-201100.14.0: RNCC: 2 | RNVC: 2
2300223-201100.14.0: RNCC: 3 | RNVC: 2

15 Oct 1986

5340-12-359-4379
Loop Clamp

123594379
DIN3016-1-D2-16-16X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-348-0673
Mending Plate

123480673
58R052-3311-3: RNCC: 2 | RNVC: 2
58R052-3311-3: RNCC: 3 | RNVC: 2

8 Apr 1999

5340-12-314-8573
Spring Tension Clip

123148573
2360-261112.02.0: RNCC: 2 | RNVC: 2
2360-261112.02.0: RNCC: 3 | RNVC: 2

19 Aug 1988

5340-12-383-1926
Clamping Catch

123831926
121W168210.006.0: RNCC: 2 | RNVC: 2
121W168210.006.0: RNCC: 3 | RNVC: 2
1921502: RNCC: 5 | RNVC: 2

23 Sep 2010

5340-12-320-5745
Handle Grip

123205745
4900059-751550.007.0: RNCC: 3 | RNVC: 2
1227248: RNCC: 5 | RNVC: 2

26 Jan 1990

5340-12-376-2857
Rim Lock

123762857
1-36-37191-550: RNCC: 3 | RNVC: 2
1-36-37191-550: RNCC: 5 | RNVC: 9

8 Sep 2008

5340-12-374-2561
Mounting Bracket

123742561
L521M1059204: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-150-7674
Nonmetallic Bumper

121507674
100334-1200.07: RNCC: 2 | RNVC: 2
100334-1200-07: RNCC: 5 | RNVC: 2
100334-1200-07: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-189-9624
Electrical-Mechanical Equipment Post

121899624
009-078.113-003: RNCC: 3 | RNVC: 2
009-078-113-003: RNCC: 5 | RNVC: 2
009-078.113-003: RNCC: 5 | RNVC: 9
009-078-113-003: RNCC: 5 | RNVC: 9

29 Oct 1981

5340-12-308-2903
Bridge Clamp

123082903
5800043-2700.03: RNCC: 2 | RNVC: 2
5800043-2700.03: RNCC: 3 | RNVC: 2
5800043-2700-03: RNCC: 5 | RNVC: 2
5800043-2700-03: RNCC: 5 | RNVC: 9

24 Sep 1986

5340-12-339-3019
Access Cover

123393019
2300223-207220.04.0: RNCC: 2 | RNVC: 2
2300223-207220.04.0: RNCC: 3 | RNVC: 2
3000008-207220.04.0: RNCC: 5 | RNVC: 2
23 00 223-207 220 04 0: RNCC: 5 | RNVC: 2
A4-248.052-63: RNCC: 5 | RNVC: 2

7 Nov 1995

5340-12-365-6346
Multiple Angle Bracket

123656346
J92228104-005: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-352-2269
Mounting Bracket

123522269
5062033140: RNCC: 3 | RNVC: 2
506 203 31 40: RNCC: 5 | RNVC: 2

26 Oct 2000

5340-12-166-2588
Helical Compression Spring Retainer

121662588
02342: RNCC: 3 | RNVC: 2
02342: RNCC: 5 | RNVC: 9

19 Aug 1976

5340-12-188-0771
Retaining Strap

121880771
03092500: RNCC: 3 | RNVC: 2
03092500.294: RNCC: 5 | RNVC: 9
29.07.27B: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-322-2586
Retaining Strap

123222586
RK10: RNCC: 3 | RNVC: 2
522497: RNCC: 5 | RNVC: 2

6 Aug 1990

5340-12-094-5586

5340-12-316-8294
Angle Bracket

123168294
2300279-5000.53: RNCC: 2 | RNVC: 2
2300279-5000.53: RNCC: 3 | RNVC: 2
2300279-5000.53: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-356-5322
Mounting Bracket

123565322
11.44086-0379: RNCC: 3 | RNVC: 2
11.44000-2610POS177: RNCC: 5 | RNVC: 2

8 Mar 2002

5340-12-194-6823
Clamping Catch

121946823
01801-NIRO: RNCC: 3 | RNVC: 2
01801NIR0: RNCC: 5 | RNVC: 2
01801: RNCC: 5 | RNVC: 9

25 Nov 1982

5340-12-122-2380
Rohrschelle

121222380
HSN15808-52: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-300-2177
Mending Plate

123002177
23114-1900.40: RNCC: 2 | RNVC: 2
23114-1900.40: RNCC: 3 | RNVC: 2
23114-1900-40: RNCC: 5 | RNVC: 9
23114-1900.40: RNCC: 5 | RNVC: 9
23114-1900-40: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-163-9980
Access Cover

121639980
V22.228.530000-15: RNCC: 3 | RNVC: 2
V2-228-530000-15: RNCC: 5 | RNVC: 2
V2.228.530000-15: RNCC: 5 | RNVC: 2
V22-228-530000-15EZ4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-182-3131
Manual Control Handle

121823131
5801215-88-001: RNCC: 3 | RNVC: 2
5801215-88.00: RNCC: 5 | RNVC: 2

25 Jan 1980

5340-12-176-2482
Bow Handle

121762482
2608-437: RNCC: 3 | RNVC: 2
2608437: RNCC: 5 | RNVC: 2

23 Nov 1978

5340-12-702-1559
Mounting Bracket

127021559
VG95211-ML-127021559: RNCC: 2 | RNVC: 2
30.6113.170: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-175-4812
Nonmetallic Bumper

121754812
23111-4743.01: RNCC: 2 | RNVC: 2
23111-4743.01: RNCC: 3 | RNVC: 2
23111-4743.01: RNCC: 3 | RNVC: 2
SG01400E: RNCC: 3 | RNVC: 2
23111-4743-01: RNCC: 5 | RNVC: 2
23111-4743-01: RNCC: 5 | RNVC: 9
23111-4743-01: RNCC: 5 | RNVC: 9

19 Sep 1978

5340-12-318-0660
Nonmetallic Bumper

123180660
704-125217-000-0: RNCC: 3 | RNVC: 2

8 Jun 1989

5340-12-701-3406
Mounting Bracket

127013406
VG95211-ML-127013406: RNCC: 2 | RNVC: 2
5.12.5111.1390.04: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7199
Angle Bracket

127017199
VG95211-ML-127017199: RNCC: 2 | RNVC: 2
5.12.7601.8389.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-309-4063
Retaining Strap

123094063
WW 418 179 A: RNCC: 2 | RNVC: 2
WW 418 179 A: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-175-9154
Resilient Mount

121759154
48693.NR45.ST: RNCC: 3 | RNVC: 2
48693FNKN4590: RNCC: 3 | RNVC: 2
1024451000: RNCC: 3 | RNVC: 2
48693NKP450: RNCC: 5 | RNVC: 2
48693,NR45-METALL-FLANSCH: RNCC: 5 | RNVC: 2
23610: RNCC: 5 | RNVC: 2
331323610: RNCC: 5 | RNVC: 2
48693NKP450: RNCC: 5 | RNVC: 9
48693NKP450: RNCC: 5 | RNVC: 9

25 Oct 1978

5340-12-301-7981
Angle Bracket

123017981
1361013-14140.03: RNCC: 3 | RNVC: 2
1361013-14140-03: RNCC: 5 | RNVC: 2

10 Nov 1984

5340-12-326-9773
Mounting Bracket

123269773
2300232-977050.000.0: RNCC: 2 | RNVC: 2
2300232-977050.000.0: RNCC: 3 | RNVC: 2

15 Nov 1991

5340-12-393-4283
Lock-Release Lever

123934283
107W163354.000.0: RNCC: 3 | RNVC: 2
107W163354.000.0: RNCC: 5 | RNVC: 2

16 Sep 2013

5340-12-194-7725
Helical Compression Spring Seat

121947725
WW415920A: RNCC: 3 | RNVC: 9
WW 415 920 A: RNCC: 5 | RNVC: 2
WW415920A: RNCC: 5 | RNVC: 2
WW 415 920 A: RNCC: 5 | RNVC: 9

6 Dec 1982

5340-12-386-2983
Spacing Threaded Standoff

123862983
30-018-01-0097423: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-12-123-8443
Retaining Strap

121238443
111415611: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-183-6096
Resilient Mount

121836096
211261325B: RNCC: 3 | RNVC: 9

3 May 1980

5340-12-307-9111
Hand Carrying Strap Assembly

123079111
7064: RNCC: 3 | RNVC: 2

8 Aug 1986

5340-12-352-8704
Spannversch Halter

123528704
VG95211-ML-123528704: RNCC: 2 | RNVC: 2
774-126-67: RNCC: 3 | RNVC: 2

22 Dec 2000

5340-12-702-5357
Mounting Bracket

127025357
VG95211-ML-127025357: RNCC: 2 | RNVC: 2
5.51.7204.0580.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-314-3662
Angle Bracket

123143662
4500472: RNCC: 3 | RNVC: 2
5801443-121111-003: RNCC: 5 | RNVC: 9

30 Jun 1988

5340-12-310-5332
Mending Plate

123105332
53.3031.061.04: RNCC: 3 | RNVC: 2
5800416-0551.002: RNCC: 3 | RNVC: 2
53.3031.061.04: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-184-7771
Bow Handle

121847771
5801505-3222: RNCC: 3 | RNVC: 2

16 Aug 1980

5340-12-349-6476
Mending Plate

123496476
5803671-201220.00: RNCC: 2 | RNVC: 2
0106.21220.220: RNCC: 3 | RNVC: 2
5803671-201220.00: RNCC: 5 | RNVC: 2
5803671-201220.00: RNCC: 5 | RNVC: 2

14 Dec 1999

5340-12-380-7726
Angle Bracket

123807726
601245-201300.01: RNCC: 2 | RNVC: 2
601245-201300.01: RNCC: 3 | RNVC: 2

27 Nov 2009

5340-12-184-1272
Retaining Strap

121841272
10621-02: RNCC: 3 | RNVC: 2
465752-002: RNCC: 5 | RNVC: 9

26 Jun 1980

5340-12-327-8033
Mending Plate

123278033
2300013-1200.19: RNCC: 2 | RNVC: 2
9877974: RNCC: 3 | RNVC: 2
2300013-1200.19: RNCC: 5 | RNVC: 9
9877974: RNCC: 5 | RNVC: 9

6 Mar 1992

5340-12-333-8491
Runner

123338491
532104-4084.000: RNCC: 2 | RNVC: 2
532104-4084.000: RNCC: 3 | RNVC: 2
532104-4084.000: RNCC: 5 | RNVC: 9

17 Feb 1994

5340-12-362-9358
Manual Control Lever

123629358
06360-112X100-A3P: RNCC: 3 | RNVC: 2
NLM06360-112X100-A3P: RNCC: 5 | RNVC: 2

17 Apr 2004

5340-12-177-1202
Rod End Clevis

121771202
81954900037: RNCC: 3 | RNVC: 2
00009270004: RNCC: 5 | RNVC: 2
E00009270004: RNCC: 5 | RNVC: 2
81.95490-0037: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-393-7243
Mounting Plate

123937243
M4817051420000: RNCC: 3 | RNVC: 2

7 Oct 2013

5340-12-302-7109
Loop Clamp

123027109
51.6816.041.00: RNCC: 3 | RNVC: 2

24 Jan 1985

5340-12-318-7314
Mounting Plate

123187314
704-122100-926-0: RNCC: 3 | RNVC: 2

11 Aug 1989

5340-12-344-4479
Mounting Bracket

123444479
P-296880-057: RNCC: 3 | RNVC: 2
P296880-057: RNCC: 5 | RNVC: 2

28 Oct 1997

5340-12-315-9068
Mounting Bracket

123159068
54.0026.200.00: RNCC: 3 | RNVC: 2
54002620000: RNCC: 5 | RNVC: 2

7 Dec 1988

5340-12-328-6729
Resilient Mount

123286729
701399201C: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-702-4017
Retaining Band

127024017
VG95211-ML-127024017: RNCC: 2 | RNVC: 2
5.12.5811.1880.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-195-0344
Angle Bracket

121950344
42-1543-350620.02.0: RNCC: 3 | RNVC: 2
42-1543-350620-02-0: RNCC: 5 | RNVC: 2
42-1543-350620.02.0: RNCC: 5 | RNVC: 9

4 Jan 1983

5340-12-199-6985
Plain Solid Disk

121996985
158743: RNCC: 2 | RNVC: 2
158743: RNCC: 3 | RNVC: 2

24 May 1984

5340-12-367-9525
Clamping Catch

123679525
M-507-005-11.0: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-12-339-5490
Key Blank

123395490
609A014-E1: RNCC: 3 | RNVC: 2
609A014: RNCC: 5 | RNVC: 2

4 Dec 1995

5340-12-700-2405
Rod End Clevis

127002405
51-270475094: RNCC: 2 | RNVC: 2
765-65-357SL: RNCC: 3 | RNVC: 2

15 Nov 1991

5340-12-360-9380
Bow Handle

123609380
2500306-196600.000.0: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-321-7929
Access Door

123217929
P-888534-403: RNCC: 3 | RNVC: 2
P888534-403: RNCC: 5 | RNVC: 2

27 Jun 1990

5340-12-177-8518
Webbing Strap

121778518
707514-0013.000: RNCC: 3 | RNVC: 2
707514-0013: RNCC: 5 | RNVC: 2
1200054-00511-5: RNCC: 5 | RNVC: 9
1200054-00511.5: RNCC: 5 | RNVC: 9

5 Mar 1979

5340-12-304-1769
Nonmetallic Solid Wheel

123041769
TOO125X50-20-00028144 GS: RNCC: 3 | RNVC: 2
EA077: RNCC: 5 | RNVC: 9

20 Jun 1985

5340-12-179-6007
Resilient Mount

121796007
6150940085: RNCC: 3 | RNVC: 2

11 Jul 1979

5340-12-042-0910

5340-12-370-5356
Multiple Angle Bracket

123705356
54.1094.690.03: RNCC: 3 | RNVC: 2

17 Nov 2006

5340-12-393-8420
Swivel Caster

123938420
NO PRIMARY REF 12-393-8420: RNCC: 3 | RNVC: 2
918661: RNCC: 5 | RNVC: 2

15 Oct 2013

5340-12-317-3221
Mending Plate

123173221
4900064-4122.001: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-171-1199
Resilient Mount

121711199
81962100268: RNCC: 3 | RNVC: 2
845-81.96210.0268: RNCC: 5 | RNVC: 2
57423190046: RNCC: 5 | RNVC: 2
742319: RNCC: 5 | RNVC: 2
81.96210-0268: RNCC: 5 | RNVC: 2

9 Sep 1977

5340-12-353-8599
Angle Bracket

123538599
J92220324-001: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-183-5817
Access Cover

121835817
CF105044AR: RNCC: 3 | RNVC: 2
CF 105 044 AR: RNCC: 5 | RNVC: 2
CF105044AR: RNCC: 5 | RNVC: 2
CF105044AR: RNCC: 5 | RNVC: 2
CF 105 044 AR: RNCC: 5 | RNVC: 2

3 May 1980

5340-12-355-2416
Retaining Strap

123552416
5803937-011: RNCC: 2 | RNVC: 2
5803937-011: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-12-134-6402
Escutcheon Plate

121346402
4730004: RNCC: 3 | RNVC: 2
509041: RNCC: 5 | RNVC: 2
39353: RNCC: 5 | RNVC: 2
2512-37-41: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-143-1213
Door Button

121431213
2342-18-032-00E: RNCC: 2 | RNVC: 2
010-45-31-330-01E: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-187-9741
Mending Plate

121879741
2300109-820070.000.0: RNCC: 3 | RNVC: 2
2300109-820070.000.0: RNCC: 3 | RNVC: 2
2300109-820070-000-0: RNCC: 5 | RNVC: 2
2300109-820070-000-0: RNCC: 5 | RNVC: 2
2300109-820070-000-0: RNCC: 5 | RNVC: 9
2300109-820070.000.0: RNCC: 5 | RNVC: 9

25 May 1981

5340-12-150-2458
Rod End Clevis

121502458
7-29-7-02-80-04-01: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-328-9633
Resilient Mount

123289633
20290BA-L-BSTN4090: RNCC: 3 | RNVC: 2
KOMBIELEMENTLMITPUFFER70X60-40SH: RNCC: 5 | RNVC: 2
KOMBIELEMENTMITPUFFERL70X60-40SH: RNCC: 5 | RNVC: 2
134578-04012: RNCC: 5 | RNVC: 2

3 Jul 1992

5340-12-196-3024
Access Cover

121963024
769-421100.00.0: RNCC: 3 | RNVC: 2
769-421100-00-0: RNCC: 5 | RNVC: 9
769-421100.00.0: RNCC: 5 | RNVC: 9
769-421100.00.0: RNCC: 5 | RNVC: 9

27 Jun 1983

5340-12-304-1812
Nonmetallic Bumper

123041812
47-1156-000500.008.0: RNCC: 2 | RNVC: 2
47-1156-000500.008.0: RNCC: 3 | RNVC: 2
47-1156-000500-008-0: RNCC: 5 | RNVC: 2

20 Jun 1985

5340-12-363-1235
Loop Clamp

123631235
0117 8181: RNCC: 3 | RNVC: 2
H3223-C22X20-ST/MVQ-1-70: RNCC: 5 | RNVC: 2

5 May 2004

5340-12-355-1846
Angle Bracket

123551846
VG95211-ML-123551846: RNCC: 2 | RNVC: 2
5.12.5314.8500.59: RNCC: 3 | RNVC: 2

19 Oct 2001

5340-12-173-2308
Electrical-Mechanical Equipment Post

121732308
5800828-13511-001: RNCC: 3 | RNVC: 2
5800828-13511.001: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-12-382-2757
Elastic Strap

123822757
79017/026-0700-0180: RNCC: 2 | RNVC: 2

31 May 2010

5340-12-341-4035
Resilient Mount

123414035
1221/4521.01.10.01: RNCC: 3 | RNVC: 2
1221/4521.01.10.01: RNCC: 3 | RNVC: 2
36K/01/4521.01.10.01: RNCC: 5 | RNVC: 2
1221/4521.01.10.01: RNCC: 5 | RNVC: 2

31 Aug 1996

5340-12-188-4029
Mending Plate

121884029
5802206-045000-002: RNCC: 2 | RNVC: 2
535.5232: RNCC: 3 | RNVC: 2
5355232: RNCC: 5 | RNVC: 2

7 Jul 1981

5340-12-370-4465
Flush Catch Claw

123704465
491-190155.000: RNCC: 3 | RNVC: 2

8 Nov 2006

5340-12-344-6552
Access Cover

123446552
113058: RNCC: 3 | RNVC: 2
ESC-300-01: RNCC: 5 | RNVC: 2

24 Nov 1997

5340-12-320-3860
Access Door

123203860
924889: RNCC: 3 | RNVC: 2
065-028120-00: RNCC: 5 | RNVC: 2
065-028120.00: RNCC: 5 | RNVC: 2

9 Jan 1990

5340-12-168-5701
Rod End Clevis

121685701
1000025-261000-03: RNCC: 3 | RNVC: 2
1000025-261000.03: RNCC: 3 | RNVC: 2
1000025-261000.03: RNCC: 5 | RNVC: 9
1000025-261000-03: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-197-1320
Mending Plate

121971320
5801434-401000.06: RNCC: 3 | RNVC: 2
5801434-401000-06: RNCC: 5 | RNVC: 2

22 Sep 1983

5340-12-330-3436
Protection Bellows

123303436
289539: RNCC: 3 | RNVC: 2
289539: RNCC: 5 | RNVC: 2
85-694-9020: RNCC: 6 | RNVC: 9

3 Dec 1992

5340-12-333-6199
Mounting Bracket

123336199
C76-601210.05: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-12-365-5816
Angle Bracket

123655816
J28130035-001: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-362-9364
Snap Hook

123629364
219687: RNCC: 3 | RNVC: 2
94322-520: RNCC: 5 | RNVC: 9

17 Apr 2004

5340-12-323-4287
Nonmetallic Bumper

123234287
1368016: RNCC: 3 | RNVC: 2
3503.005.00.00/021: RNCC: 5 | RNVC: 2
3503.05.00/21: RNCC: 5 | RNVC: 2
FBU6185: RNCC: 5 | RNVC: 2

26 Nov 1990

5340-12-354-4295
Manual Control Handle

123544295
E31247 -00: RNCC: 3 | RNVC: 2

11 Jul 2001

5340-12-324-2986
Lock-Release Lever

123242986
GN500-42-M6-30-SW: RNCC: 3 | RNVC: 2

5 Feb 1991

5340-12-366-7583
Loop Clamp

123667583
JN0206-40V: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-12-356-2504
Angle Bracket

123562504
6600218-3300: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-198-7001
Nonmetallic Bumper

121987001
5801763-030000.005: RNCC: 2 | RNVC: 2
5801763-030000.005: RNCC: 3 | RNVC: 2
5801763-030000.005: RNCC: 5 | RNVC: 9

17 Feb 1984

5340-12-352-0707
Dust And Moisture Seal Protective Plug

123520707
600B679RAL3000: RNCC: 3 | RNVC: 2
GPN600B679R0UGE: RNCC: 5 | RNVC: 2
GPN600B679ROUGE: RNCC: 5 | RNVC: 2
GPN600B679ROT: RNCC: 5 | RNVC: 9

12 Oct 2000

5340-12-350-1368
Access Cover

123501368
105-60921: RNCC: 3 | RNVC: 2

18 Feb 2000

5340-12-353-1565
Mounting Plate

123531565
5062230541: RNCC: 3 | RNVC: 2
506 223 05 41: RNCC: 5 | RNVC: 2

5 Feb 2001

5340-12-026-9425

5340-12-175-1427
Dust And Moisture Seal Protective Plug

121751427
81960020136: RNCC: 3 | RNVC: 2
PP700002E: RNCC: 5 | RNVC: 9

28 Aug 1978

5340-12-364-2459
Mounting Bracket

123642459
4375000727: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-346-0058
Mounting Plate

123460058
2300061-291200.010: RNCC: 2 | RNVC: 2
2300061-291200.010: RNCC: 3 | RNVC: 2
9908160: RNCC: 5 | RNVC: 9
2300061-291200.010: RNCC: 5 | RNVC: 9

28 May 1998

5340-12-341-1573
Mending Plate

123411573
E5301068: RNCC: 3 | RNVC: 2

2 Aug 1996

5340-12-393-2778
Block Clamp

123932778
ECS6088G1C10: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-12-348-8607
Mounting Bracket

123488607
4365060140: RNCC: 3 | RNVC: 2
4GA-788: RNCC: 5 | RNVC: 9

27 Aug 1999

5340-12-363-6905
Butt Hinge Leaf

123636905
T531M5502206: RNCC: 2 | RNVC: 2
T531M5502206: RNCC: 3 | RNVC: 2

15 Jul 2004

5340-12-365-1586
Angle Bracket

123651586
S259M8043210: RNCC: 2 | RNVC: 2
S259M8043210: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-365-9412
Mounting Bracket

123659412
9304297540: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-12-311-3503
Nonmetallic Bumper

123113503
272.315 969: RNCC: 2 | RNVC: 2
272.315 969: RNCC: 3 | RNVC: 2

21 Aug 1987

5340-12-091-3376

Load More Results