What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 13 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 13 of 178

5340-12-181-2676
Mounting Bracket

121812676
5802075-010000: RNCC: 2 | RNVC: 2
9321002-79: RNCC: 5 | RNVC: 9

7 Nov 1979

5340-12-376-7580
Bumper

123767580
K50X18D55/03: RNCC: 3 | RNVC: 2

4 Nov 2008

5340-12-196-4519
Bridge Clamp

121964519
C22117-A163-C6: RNCC: 3 | RNVC: 2
C22117A163C6: RNCC: 5 | RNVC: 2

7 Jul 1983

5340-12-701-6501
Angle Bracket

127016501
VG95211-ML-127016501: RNCC: 2 | RNVC: 2
5.12.7205.8040.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-158-3016
Resilient Mount

121583016
DIN95363-B40X25-M10X20-NR55ST: RNCC: 2 | RNVC: 2
81110-40X25-M10X20.NR55.ST: RNCC: 5 | RNVC: 2
5M6671-110-10: RNCC: 5 | RNVC: 2
5M6671.110-10: RNCC: 5 | RNVC: 2
VG95363-B40X25-M10X20-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-331-6880
Mounting Bracket

123316880
480-7397-26-13-00: RNCC: 3 | RNVC: 2
480/7397-26-13-00: RNCC: 5 | RNVC: 2

8 Jun 1993

5340-12-166-9277
Nut And Bolt Locking Plate

121669277
23290-141000.031: RNCC: 2 | RNVC: 2
23290-141000.031: RNCC: 3 | RNVC: 2
23290-141000-031: RNCC: 5 | RNVC: 9
23290-141000.031: RNCC: 5 | RNVC: 9
23290-141000.031: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-12-358-2036
Section Block Clamp

123582036
2500262-192900.015.0: RNCC: 2 | RNVC: 2
2500262-192900.015.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-377-6099
Bumper

123776099
312173: RNCC: 3 | RNVC: 2
5183-04-12-00/37: RNCC: 5 | RNVC: 2

28 Jan 2009

5340-12-314-2836
Mending Plate

123142836
P-856650-007: RNCC: 3 | RNVC: 2
P856650-007: RNCC: 5 | RNVC: 2

23 Jun 1988

5340-12-300-7412
Angle Bracket

123007412
2300102-063050.00.0: RNCC: 2 | RNVC: 2
2300102-063050.00.0: RNCC: 3 | RNVC: 2
2300102-063050-00-0: RNCC: 5 | RNVC: 9

25 Aug 1984

5340-12-175-2438
Retaining Strap

121752438
6.6208-0034.1: RNCC: 3 | RNVC: 2
6-6208-0034-1: RNCC: 5 | RNVC: 2

4 Sep 1978

5340-12-383-6341
Mounting Bracket

123836341
601257-201400.01: RNCC: 2 | RNVC: 2
601257-201400.01: RNCC: 3 | RNVC: 2

17 Nov 2010

5340-12-142-0992
Dust And Moisture Seal Protective Cap

121420992
100195-3120.00: RNCC: 2 | RNVC: 2
100195-3120.00: RNCC: 3 | RNVC: 2
100195-3120.00: RNCC: 3 | RNVC: 9
100195-3120-00: RNCC: 5 | RNVC: 2
100195-3120-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-3286
Friction Catch

123193286
5801789-152: RNCC: 2 | RNVC: 2
5801789-152: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-12-348-6055
Mounting Bracket

123486055
409099731: RNCC: 3 | RNVC: 2
409-099 731: RNCC: 5 | RNVC: 2

26 Jul 1999

5340-12-361-0357
Angle Bracket

123610357
J92224333-407: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-328-6749
Retaining Strap

123286749
701611767A: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-385-0903
Nonmetallic Solid Wheel

123850903
2048304016: RNCC: 3 | RNVC: 2

29 Apr 2011

5340-12-382-4433
Webbing Strap

123824433
T15102: RNCC: 3 | RNVC: 2

23 Jun 2010

5340-12-383-3785
Dust And Moisture Seal Protective Cap

123833785
24046A: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-12-375-7259
Retaining Strap

123757259
2114910023: RNCC: 3 | RNVC: 2
A2114910023: RNCC: 5 | RNVC: 9

30 Jun 2008

5340-12-168-1816
Access Cover

121681816
109106301: RNCC: 3 | RNVC: 2
E109106301: RNCC: 5 | RNVC: 9

23 Feb 1977

5340-12-359-9226
Access Cover

123599226
2819-191000.001.0: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-12-389-9156
Access Cover

123899156
2300560-185400.001.0: RNCC: 2 | RNVC: 2
2300560-185400.001.0: RNCC: 3 | RNVC: 2

12 Sep 2012

5340-12-702-5068
Rod End Connector

127025068
VG95211-ML-127025068: RNCC: 2 | RNVC: 2
5.51.6501.0970.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-136-0202

5340-12-346-0057
Mounting Plate

123460057
2300061-291200.008: RNCC: 2 | RNVC: 2
2300061-291200.008: RNCC: 3 | RNVC: 2
9908158: RNCC: 5 | RNVC: 9
2300061-291200.008: RNCC: 5 | RNVC: 9

28 May 1998

5340-12-337-3654
Angle Bracket

123373654
88613405001: RNCC: 3 | RNVC: 2
88.61340.5001: RNCC: 5 | RNVC: 2

21 Feb 1995

5340-12-378-6325
Corrosion Preventive Anode

123786325
307768: RNCC: 3 | RNVC: 2

27 Apr 2009

5340-12-379-8092
Loop Clamp

123798092
05727546: RNCC: 3 | RNVC: 2
05727546: RNCC: 5 | RNVC: 2
CV168816: RNCC: 5 | RNVC: 2

3 Sep 2009

5340-12-026-1003

5340-12-180-6977
Dust And Moisture Seal Protective Plug

121806977
0287 3619: RNCC: 3 | RNVC: 2
2873619: RNCC: 5 | RNVC: 2
2873619EZ8928-63: RNCC: 5 | RNVC: 2

28 Sep 1979

5340-12-384-3618
Dust And Moisture Seal Protective Plug

123843618
GPN600B1490: RNCC: 3 | RNVC: 2

17 Feb 2011

5340-12-197-5579
Pad Eye

121975579
3127250280: RNCC: 3 | RNVC: 2

2 Nov 1983

5340-12-358-7606
Double Angle Bracket

123587606
280.14.0424: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-308-6637
Access Cover

123086637
4502501: RNCC: 3 | RNVC: 2

4 Nov 1986

5340-12-349-8928
Mechanical Stop

123498928
T537M3002211: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-360-0378
Mounting Bracket

123600378
2500261-184000.005.0: RNCC: 2 | RNVC: 2
2500261-184000.005.0: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-304-7846
Transom Chain

123047846
704-121352-000-0: RNCC: 3 | RNVC: 2

26 Aug 1985

5340-12-341-0527
Rod End Clevis

123410527
SK475-186210.001.0: RNCC: 3 | RNVC: 2

23 Jul 1996

5340-12-701-6412
Angle Bracket

127016412
VG95211-ML-127016412: RNCC: 2 | RNVC: 2
5.12.7080.1440.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7869
Mounting Plate

127017869
VG95211-ML-127017869: RNCC: 2 | RNVC: 2
5.12.7805.1035.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-7943
Spacing Threaded Standoff

123597943
2500261-182108.001.0: RNCC: 2 | RNVC: 2
2500261-182108.001.0: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-312-2277
Pad Eye

123122277
2500194-198900.001.0: RNCC: 2 | RNVC: 2
2500194-198900.001.0: RNCC: 3 | RNVC: 2

7 Dec 1987

5340-12-312-7908
Mending Plate

123127908
5801984-200211.003.0: RNCC: 2 | RNVC: 2
5801984-200211.003.0: RNCC: 3 | RNVC: 2

5 Feb 1988

5340-12-314-9022
Webbing Strap

123149022
160-26283-04: RNCC: 3 | RNVC: 2
160-26283-04: RNCC: 5 | RNVC: 9

25 Aug 1988

5340-12-162-5880
Resilient Mount

121625880
DIN95363-B20X15-M5X20-NR55ST: RNCC: 2 | RNVC: 2
510016-M5X20.NR55.ST: RNCC: 5 | RNVC: 2
AE3-40: RNCC: 5 | RNVC: 9
VG95363-B20X15-M5X20-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-394-5362
Snap-In Plain Standoff

123945362
2500261-185230.003.0: RNCC: 2 | RNVC: 2
2500261-185230.003.0: RNCC: 3 | RNVC: 2

11 Dec 2013

5340-12-354-1672
Nonmetallic Bumper

123541672
5-612-3141: RNCC: 3 | RNVC: 2

12 Jun 2001

5340-12-315-1884
Strap Bolt

123151884
3813170119: RNCC: 3 | RNVC: 2
381 317 01 19: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-388-1601
Runner

123881601
5802017-714600.01: RNCC: 2 | RNVC: 2
5802017-714600.01: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-12-391-4243
Protection Bellows

123914243
I006717: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-350-8230
Mounting Bracket

123508230
8370902040: RNCC: 3 | RNVC: 2
837 090 20 40: RNCC: 5 | RNVC: 2

25 May 2000

5340-12-349-7843
Angle Bracket

123497843
0044-602000B16B: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-178-9320
Helical Compression Spring Seat

121789320
1300530225: RNCC: 3 | RNVC: 2
1300530025: RNCC: 5 | RNVC: 9

25 May 1979

5340-12-389-1665
Expansion Shield

123891665
924176: RNCC: 3 | RNVC: 2
924176: RNCC: 5 | RNVC: 2
2500601055: RNCC: 5 | RNVC: 2
07401600: RNCC: 5 | RNVC: 9

31 May 2012

5340-12-357-3717
Clamping Catch

123573717
602 0126: RNCC: 3 | RNVC: 2

13 Jun 2002

5340-12-350-7646
Runner

123507646
49.1825.0026: RNCC: 3 | RNVC: 2

17 May 2000

5340-12-175-8575
Angle Bracket

121758575
81151100022: RNCC: 3 | RNVC: 2

23 Oct 1978

5340-12-178-0445
Retaining Strap

121780445
6205460244: RNCC: 3 | RNVC: 2
3935460044: RNCC: 5 | RNVC: 2

16 Mar 1979

5340-12-198-4360
Catch Strike

121984360
3097200031: RNCC: 3 | RNVC: 2

27 Jan 1984

5340-12-357-4757
Access Cover

123574757
A10048: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-12-340-1546
Mounting Bracket

123401546
81976405003: RNCC: 3 | RNVC: 2
81.97640.5003: RNCC: 5 | RNVC: 2

7 Mar 1996

5340-12-316-0544
Mending Plate

123160544
54.0046.609.01: RNCC: 3 | RNVC: 2

17 Dec 1988

5340-12-346-4770
Access Cover

123464770
1751218MOB: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-12-362-5347
Nonmetallic Bumper

123625347
3014920382: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-381-4792
Protection Bellows

123814792
105-62305.19: RNCC: 3 | RNVC: 2

22 Feb 2010

5340-12-352-6886
Mounting Bracket

123526886
1290 306 265: RNCC: 3 | RNVC: 2
1290306265: RNCC: 5 | RNVC: 2
07984335: RNCC: 5 | RNVC: 2
7984335: RNCC: 5 | RNVC: 9

6 Dec 2000

5340-12-159-7776
Helical Compression Spring Retainer

121597776
1240 304 226: RNCC: 3 | RNVC: 2
1250304226: RNCC: 5 | RNVC: 2
1240304226: RNCC: 5 | RNVC: 9
100CP0474: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-044-4421

5340-12-311-7677
Mending Plate

123117677
9040519: RNCC: 3 | RNVC: 2
32400074801000: RNCC: 5 | RNVC: 2

15 Oct 1987

5340-12-359-9867
Hand Crank

123599867
61040: RNCC: 3 | RNVC: 2

26 Mar 2003

5340-12-342-8316
Retaining Strap

123428316
R25222: RNCC: 3 | RNVC: 2
R25222: RNCC: 5 | RNVC: 9

8 Apr 1997

5340-12-143-4058

5340-12-359-6875
Retaining Band

123596875
9454300640: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-138-4405

5340-12-701-5670
Lock-Release Lever

127015670
VG95211-ML-127015670: RNCC: 2 | RNVC: 2
5.12.6149.0011.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-152-3008
Electrical-Mechanical Equipment Post

121523008
5800400-0120-002: RNCC: 3 | RNVC: 2
6P358-120-2: RNCC: 5 | RNVC: 2
5800400-0120-002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-338-2028
Spacing Threaded Standoff

123382028
706-152000-952-0: RNCC: 3 | RNVC: 2

2 Jun 1995

5340-12-196-3953
Angle Bracket

121963953
272.1414.2-04: RNCC: 3 | RNVC: 2

4 Jul 1983

5340-12-196-3650
Rod End Clevis

121963650
556-216 170.01.0: RNCC: 3 | RNVC: 2
556-216 170.01.0: RNCC: 5 | RNVC: 9

30 Jun 1983

5340-12-390-5522
Angle Bracket

123905522
SK1034-162800.040.0: RNCC: 3 | RNVC: 2
7109540: RNCC: 5 | RNVC: 2

23 Nov 2012

5340-12-702-5202
Mounting Bracket

127025202
VG95211-ML-127025202: RNCC: 2 | RNVC: 2
5.51.7004.0070.04: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-363-9075
Angle Bracket

123639075
J92226810-401: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-198-1130
Dust And Moisture Seal Protective Plug

121981130
5801411-3311.007: RNCC: 3 | RNVC: 2
5801411-3311.007: RNCC: 5 | RNVC: 9

21 Dec 1983

5340-12-341-0282
Access Door

123410282
2500262-191100.000.0: RNCC: 2 | RNVC: 2
2500262-191100.000.0: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-12-333-1672
Support Hook

123331672
U100-3752-000: RNCC: 2 | RNVC: 2
U100-3752-000: RNCC: 3 | RNVC: 2

5 Nov 1993

5340-12-376-6483
Block Clamp

123766483
312341: RNCC: 3 | RNVC: 2
5281-07-15-00/37: RNCC: 5 | RNVC: 2

24 Oct 2008

5340-12-194-5246
Mending Plate

121945246
20-5160-079: RNCC: 3 | RNVC: 2

12 Nov 1982

5340-12-324-6438
Webbing Strap

123246438
54.0024.406.00: RNCC: 2 | RNVC: 2
54.0024.406.00: RNCC: 3 | RNVC: 2

11 Mar 1991

5340-12-198-8860
Retaining Strap

121988860
8370701140: RNCC: 3 | RNVC: 2

9 Mar 1984

5340-12-198-8881
Angle Bracket

121988881
8370782841: RNCC: 3 | RNVC: 2

9 Mar 1984

5340-12-322-9771
Angle Bracket

123229771
702-144590-901-0: RNCC: 3 | RNVC: 2

15 Oct 1990

5340-12-701-6815
Loop Clamp

127016815
VG95211-ML-127016815: RNCC: 2 | RNVC: 2
5.12.7215.8040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-365-8279
Shimmy Damper

123658279
M-38-030-04.0/4: RNCC: 3 | RNVC: 2

10 Feb 2005

5340-12-155-7449
Resilient Mount

121557449
320-362-B-00.00: RNCC: 3 | RNVC: 2
320-362-B-00.00: RNCC: 3 | RNVC: 2
834.320-362B00-00: RNCC: 5 | RNVC: 2
320-362B00-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-702-4248
Angle Bracket

127024248
VG95211-ML-127024248: RNCC: 2 | RNVC: 2
5.12.7210.0690.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-349-3890
Thumb Latch

123493890
VG95211-ML-123493890: RNCC: 2 | RNVC: 2
T524M00X0001: RNCC: 3 | RNVC: 2
350-0045.000: RNCC: 5 | RNVC: 2

9 Nov 1999

5340-12-702-2394
Retaining Strap

127022394
VG95211-ML-127022394: RNCC: 2 | RNVC: 2
30.7702.20.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-312-6894
Resilient Mount

123126894
DIN95363-D25X20-NR45ST: RNCC: 2 | RNVC: 2
1.25.20.1A.45NR/ST: RNCC: 5 | RNVC: 2
81160-25X20-M6X20.NR45.ST: RNCC: 5 | RNVC: 2
VG95363D25X20NR45STZN: RNCC: 5 | RNVC: 9
VG95363-D25X20-NR45ST: RNCC: 5 | RNVC: 9

27 Jan 1988

5340-12-339-8372
Turnbuckle

123398372
SK 1126: RNCC: 3 | RNVC: 2
S-12800-1/18: RNCC: 5 | RNVC: 2
S-12800-1/21: RNCC: 5 | RNVC: 2
S-12849-1/18: RNCC: 5 | RNVC: 2
S-12849-1/21: RNCC: 5 | RNVC: 2

23 Jan 1996

5340-12-331-2172
Mounting Bracket

123312172
706-151200-000-0: RNCC: 3 | RNVC: 2

2 Apr 1993

5340-12-359-8973
Mounting Plate

123598973
2500298-000700.001.0: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-12-349-5101
Clamping Catch

123495101
VG95211-ML-123495101: RNCC: 2 | RNVC: 2
M-504-008-32.0: RNCC: 3 | RNVC: 2
7421-51GZN M: RNCC: 5 | RNVC: 2

24 Nov 1999

5340-12-189-7704
Handwheel

121897704
VG85089-A-80X8-RG: RNCC: 2 | RNVC: 2
VG85089-A-80X8-RG: RNCC: 3 | RNVC: 2
VG85089-A-80X8-RG: RNCC: 3 | RNVC: 2
VG85089-A-80X8-RG: RNCC: 3 | RNVC: 9
9-45029-01-02: RNCC: 5 | RNVC: 2
A80X8VG85089 RG5: RNCC: 5 | RNVC: 2
A80X8VG85089-RG5: RNCC: 5 | RNVC: 9
A80X8VG85089GCUSN5ZNPB: RNCC: 5 | RNVC: 9
A80X8VG85089RG5: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-326-5810
Lock-Release Lever

123265810
2300232-185100.002.0: RNCC: 2 | RNVC: 2
2300232-185100.002.0: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-12-196-9973
Webbing Strap

121969973
4900059-111248.000.0: RNCC: 2 | RNVC: 2
4900059-111248.000.0: RNCC: 3 | RNVC: 2
4900059-111248.000.0: RNCC: 3 | RNVC: 2
01151-2-SCHLAUFE-FE510MM-LE520MM: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-950-510: RNCC: 3 | RNVC: 2
4900059-111248.000.0: RNCC: 3 | RNVC: 2
4900059-111248.000.0: RNCC: 3 | RNVC: 2
4900059-111248-000-0: RNCC: 5 | RNVC: 2
DIN60060-2-25X510X520-C3/SCHLAUF: RNCC: 5 | RNVC: 9
4900059-111248.000.0: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-355-6432
Loop Clamp

123556432
1239950044: RNCC: 3 | RNVC: 2

30 Nov 2001

5340-12-359-0422
Dust And Moisture Seal Protective Plug

123590422
350I32: RNCC: 3 | RNVC: 2
GPN350I32: RNCC: 5 | RNVC: 2

12 Dec 2002

5340-12-375-0862
Mounting Bracket

123750862
L671M5016216: RNCC: 3 | RNVC: 2

21 Apr 2008

5340-12-386-5831
Mounting Bracket

123865831
T251M3009228: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-175-1863
Retaining Strap

121751863
02520548: RNCC: 3 | RNVC: 2
2520548EE5017-90: RNCC: 5 | RNVC: 2

30 Aug 1978

5340-12-347-2243
Dust And Moisture Seal Protective Cap

123472243
1120524004: RNCC: 3 | RNVC: 2

13 Nov 1998

5340-12-361-6498
Mounting Bracket

123616498
2300013-6103.00: RNCC: 3 | RNVC: 2

29 Oct 2003

5340-12-010-8470

5340-12-021-7902

5340-12-314-2035
Mending Plate

123142035
272.317 740: RNCC: 2 | RNVC: 2
272.317.740: RNCC: 3 | RNVC: 2
272.317 740: RNCC: 5 | RNVC: 9

16 Jun 1988

5340-12-393-4455
Butt Hinge

123934455
1056-U39: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-12-383-2712
Assembled Nut Retainer

123832712
F6782560: RNCC: 3 | RNVC: 2

30 Sep 2010

5340-12-173-6526
Dust And Moisture Seal Protective Cap-Plug

121736526
0009970520: RNCC: 2 | RNVC: 2
600B1190: RNCC: 3 | RNVC: 2
GPN600B1190: RNCC: 5 | RNVC: 2
0009970520: RNCC: 5 | RNVC: 2
600119000: RNCC: 5 | RNVC: 9
B1190: RNCC: 5 | RNVC: 9
B1190GPN600: RNCC: 5 | RNVC: 9
GPN600,B1190: RNCC: 5 | RNVC: 9

26 Apr 1978

5340-12-011-5178

5340-12-043-3015

5340-12-042-0732

5340-12-188-3296
Bow Handle

121883296
81970015049: RNCC: 3 | RNVC: 2
81.97001.5049: RNCC: 5 | RNVC: 2

30 Jun 1981

5340-12-190-5519
Loop Clamp

121905519
5800659-1020: RNCC: 2 | RNVC: 2
5800659-1020: RNCC: 3 | RNVC: 2
5800659-1020: RNCC: 3 | RNVC: 2
5800659-1020: RNCC: 5 | RNVC: 9
5800659-1020: RNCC: 5 | RNVC: 9
506-1-02: RNCC: 5 | RNVC: 9

2 Dec 1981

5340-12-184-8344
Angle Bracket

121848344
5801505-3124-003: RNCC: 3 | RNVC: 2
5801505-3124.003: RNCC: 5 | RNVC: 2

21 Aug 1980

5340-12-304-8463
Loop Clamp

123048463
DIN3016-2-G1-70X12-CUSN6F41-AG6B: RNCC: 2 | RNVC: 2
DIN3016-G1-70X12-CUSN6F41-AG6BK: RNCC: 3 | RNVC: 2
DIN3016-G1-70X12-CUSN6F41-AG6BK: RNCC: 5 | RNVC: 9
VG95931-G70X12-CUSN6F41-AG6BK: RNCC: 5 | RNVC: 9
C65055-A999-C197: RNCC: 5 | RNVC: 9
DIN3016-G1-70X12-2.1020.26-AG6BK: RNCC: 5 | RNVC: 9

28 Aug 1985

5340-12-361-1053
Mounting Bracket

123611053
4945157: RNCC: 3 | RNVC: 2
6503.201.10.30.010: RNCC: 5 | RNVC: 2

22 Aug 2003

5340-12-315-2081
Webbing Strap

123152081
A1301-2105MM: RNCC: 3 | RNVC: 2

1 Oct 1988

5340-12-142-9395
Rod End Connector

121429395
A10-23-382-04-0: RNCC: 3 | RNVC: 2
A10-23-382-04-0: RNCC: 5 | RNVC: 2
A10-23-382-04-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-388-7144
Spring Tension Clip

123887144
GS-291-3-NI: RNCC: 3 | RNVC: 2

17 Apr 2012

5340-12-343-1025
Nonmetallic Bumper

123431025
5001-017: RNCC: 3 | RNVC: 2

29 Apr 1997

5340-12-363-4685
Angle Bracket

123634685
J21520157-401: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-12-702-7572
Plug Button

127027572
50-06100980095: RNCC: 2 | RNVC: 2

13 Dec 1995

5340-12-172-7403
Nut And Bolt Locking Plate

121727403
23114-3800.22: RNCC: 2 | RNVC: 2
23114-3800.22: RNCC: 3 | RNVC: 2
23114-3800-22: RNCC: 5 | RNVC: 2
23114-3800-22: RNCC: 5 | RNVC: 9
23114-3800-22: RNCC: 5 | RNVC: 9
23114-3800.22: RNCC: 5 | RNVC: 9

14 Feb 1978

5340-12-338-8017
Angle Bracket

123388017
6700017-203300.01: RNCC: 2 | RNVC: 2
6700017-203300.01: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-178-3001
Extension Drawer Slide Section

121783001
C106-A44-C103: RNCC: 2 | RNVC: 2
C106A44C103: RNCC: 3 | RNVC: 2
C106-A44-C103: RNCC: 5 | RNVC: 2
C106A44C103: RNCC: 5 | RNVC: 2
C106-A44-C103: RNCC: 5 | RNVC: 2

12 Apr 1979

5340-12-363-9071
Runner

123639071
J92226429-001: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-168-5680
Resilient Mount

121685680
DIN95363-B25X20-M6X15-NR60ST: RNCC: 2 | RNVC: 2
5218087.60: RNCC: 5 | RNVC: 2
5218087/11MN60: RNCC: 5 | RNVC: 2
5152520: RNCC: 5 | RNVC: 2
510021-M6X15.NR60.ST: RNCC: 5 | RNVC: 2
81110-25X20-M6X15.NR60.ST: RNCC: 5 | RNVC: 2
521808715: RNCC: 5 | RNVC: 9
VG95363-B25X20-M6X15-NR60ST: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-371-5431
Manual Control Lever

123715431
2300397-183230.000.0: RNCC: 3 | RNVC: 2
1593228: RNCC: 5 | RNVC: 9

17 Apr 2007

5340-12-701-2053
Loop Clamp

127012053
VG95211-ML-127012053: RNCC: 2 | RNVC: 2
5.12.0604.0070.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5453
Mounting Bracket

127025453
VG95211-ML-127025453: RNCC: 2 | RNVC: 2
5.51.7210.1280.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-320-1033
Mending Plate

123201033
C249-A15-C118: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-351-2338
Angle Bracket

123512338
923721-2000: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-375-7459
Mechanical Stop

123757459
D0106531-001: RNCC: 3 | RNVC: 2

1 Jul 2008

5340-12-190-7187
Angle Bracket

121907187
NO PRIMARY REF 12-190-7187: RNCC: 3 | RNVC: 2
7531 137761: RNCC: 5 | RNVC: 9
7531137761: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-369-5533
Extension Drawer Slide

123695533
5803912-301100.01: RNCC: 2 | RNVC: 2
5803912-301100.01: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-12-356-0501
Cremone Bolt

123560501
2339-010092A00C: RNCC: 3 | RNVC: 2

16 Jan 2002

5340-12-344-5896
Butt Hinge Leaf

123445896
J5282005-001: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-12-385-2357
Access Door Hinge

123852357
F1.1289-47-02-00.00-10: RNCC: 3 | RNVC: 2

12 May 2011

5340-12-361-4699
Mounting Plate

123614699
009-222.300-054: RNCC: 2 | RNVC: 2
009-222.300-054: RNCC: 3 | RNVC: 2

7 Oct 2003

5340-12-381-0707
Clamp Bracket

123810707
02700387300: RNCC: 2 | RNVC: 2
02700387300: RNCC: 3 | RNVC: 2

7 Jan 2010

5340-12-339-2974
Spring Tension Clip

123392974
012378: RNCC: 3 | RNVC: 2
Z00.N7010788000: RNCC: 5 | RNVC: 2
911259: RNCC: 5 | RNVC: 2

6 Nov 1995

5340-12-372-3344
Dirt And Liquid Deflector

123723344
42102779: RNCC: 3 | RNVC: 2
42102779EE52-9080: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-12-194-1356
Support Hook

121941356
SK850: RNCC: 3 | RNVC: 2

5 Oct 1982

5340-12-158-1589
Compression Cup

121581589
BFA25-20-25-53NBR/252: RNCC: 3 | RNVC: 2
BFA25-20-25-53NBR252: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-370-6608
Rod End Clevis

123706608
A65385-1000: RNCC: 3 | RNVC: 2

6 Dec 2006

5340-12-338-0065
Butt Hinge

123380065
034396696: RNCC: 3 | RNVC: 2
3439696KZ5505-04: RNCC: 5 | RNVC: 2
5505-04-08.40: RNCC: 5 | RNVC: 2
C5505-04-08.40: RNCC: 5 | RNVC: 2
3439696K5505-04: RNCC: 5 | RNVC: 9

10 May 1995

5340-12-346-5614
Manual Control Lever

123465614
NO PRIMARY REF 12-346-5614: RNCC: 3 | RNVC: 2
441.17.163.010: RNCC: 5 | RNVC: 9

10 Aug 1998

5340-12-355-5312
Mounting Plate

123555312
2125-111100.24B: RNCC: 2 | RNVC: 2
2125-111100.24B: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-346-9502
Nonmetallic Bumper

123469502
2500213-15.03.06: RNCC: 2 | RNVC: 2
2500213-15.03.06: RNCC: 3 | RNVC: 2

1 Oct 1998

5340-12-195-7307
Butt Hinge

121957307
2500067-103140.00: RNCC: 2 | RNVC: 2
2500067-103140.00: RNCC: 3 | RNVC: 2
2500067-103140.00: RNCC: 3 | RNVC: 2
2500067-103140-00: RNCC: 5 | RNVC: 2
2500067-103140.00: RNCC: 5 | RNVC: 9

6 Apr 1983

5340-12-314-6525
Electrical-Mechanical Equipment Post

123146525
512214-0423.000: RNCC: 3 | RNVC: 2
512214-0423: RNCC: 5 | RNVC: 2

27 Jul 1988

5340-12-324-4620
Electrical-Mechanical Equipment Post

123244620
0A608.11-07-00-00-008: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-12-336-6059
Mounting Plate

123366059
1000232-01-02-00-00-003: RNCC: 2 | RNVC: 2
1000232-01-02-00-00-003: RNCC: 5 | RNVC: 2

30 Nov 1994

5340-12-184-2133
Detent Plunger

121842133
1X56 136 916: RNCC: 3 | RNVC: 2
1X56-136-916: RNCC: 5 | RNVC: 9
1X56136916: RNCC: 5 | RNVC: 9

3 Jul 1980

5340-12-702-5348
Mounting Bracket

127025348
VG95211-ML-127025348: RNCC: 2 | RNVC: 2
5.51.7204.0370.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-333-7089
Angle Bracket

123337089
2300109-140000.005.0: RNCC: 2 | RNVC: 2
2300109-140000.005.0: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-12-347-2090
Loop Clamp

123472090
DIN3016-1-A1-5X12-W1-2: RNCC: 2 | RNVC: 2
RS1.5/12-W1: RNCC: 3 | RNVC: 2
6670490069: RNCC: 3 | RNVC: 2
DIN3016-A1-5X12-W1-2: RNCC: 5 | RNVC: 9

11 Nov 1998

5340-12-343-0779
Retaining Strap

123430779
480-7397-38-00-00-3-16: RNCC: 3 | RNVC: 2
480/7397-38-00-00/3,16: RNCC: 5 | RNVC: 2
480-7397-38-00-00/3-16: RNCC: 5 | RNVC: 2

28 Apr 1997

5340-12-339-7033
Access Door

123397033
2500255-193650.000.0: RNCC: 2 | RNVC: 2
2500255-193650.000.0: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-12-361-4292
Mounting Plate

123614292
2500262-190000.046.0: RNCC: 2 | RNVC: 2
2500262-190000.046.0: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-318-0943
Mending Plate

123180943
1000192-01 2 30000.05: RNCC: 2 | RNVC: 2
1000192-01 2 30000.05: RNCC: 3 | RNVC: 2
1000192-01230000.05: RNCC: 5 | RNVC: 9
1000192-01230000.05: RNCC: 5 | RNVC: 9
10003-01 2 3000O.05: RNCC: 5 | RNVC: 9
1000192-01 2 30000.05: RNCC: 5 | RNVC: 9
1000192-01230000.05: RNCC: 5 | RNVC: 9

12 Jun 1989

5340-12-306-4358
Angle Bracket

123064358
V22.917.2-10: RNCC: 3 | RNVC: 2

28 Feb 1986

5340-12-334-7029
Mending Plate

123347029
C230ZZ29211-001: RNCC: 3 | RNVC: 2

10 Jun 1994

5340-12-333-2613
Nonmetallic Bumper

123332613
21AE9116: RNCC: 3 | RNVC: 2
26-21C1029G001P55: RNCC: 3 | RNVC: 2
26-21C1029G001-P55: RNCC: 5 | RNVC: 2

16 Nov 1993

5340-12-126-5175

5340-12-027-9501

5340-12-340-8566
Mounting Plate

123408566
921165-3000: RNCC: 3 | RNVC: 2
9211653000: RNCC: 5 | RNVC: 2

22 Jun 1996

5340-12-393-8436
Mounting Bracket

123938436
11.48952-0139: RNCC: 3 | RNVC: 2
11.48952-0139: RNCC: 5 | RNVC: 2

16 Oct 2013

5340-12-350-3844
Block Clamp

123503844
J29120356-401: RNCC: 3 | RNVC: 2

23 Mar 2000

5340-12-307-7488
Gummi- Riemen

123077488
8100219-1000-11: RNCC: 2 | RNVC: 2
4446 1182 00: RNCC: 3 | RNVC: 2
8100219-1000-11: RNCC: 5 | RNVC: 9

23 Jul 1986

5340-12-136-8977
Retaining Strap

121368977
8403377: RNCC: 3 | RNVC: 2
0047-008: RNCC: 5 | RNVC: 2
0047008: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-185-1267
Electrical-Mechanical Equipment Post

121851267
901968-4000: RNCC: 3 | RNVC: 2
81.42368-0038: RNCC: 5 | RNVC: 2
81423680038: RNCC: 5 | RNVC: 2
6090608: RNCC: 5 | RNVC: 2

13 Sep 1980

5340-12-339-7316
Support Hook

123397316
2300218-103300.05: RNCC: 2 | RNVC: 2
2300218-103300.05: RNCC: 3 | RNVC: 2

5 Jan 1996

5340-12-361-6545
Butt Hinge Leaf

123616545
5086-008700A09B: RNCC: 3 | RNVC: 2

30 Oct 2003

5340-12-357-5451
Support Hook

123575451
2125-121061B00C: RNCC: 2 | RNVC: 2
2125-121061B00C: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-700-9370
Loop Clamp

127009370
VG95211-ML-127009370: RNCC: 2 | RNVC: 2
22 OST1 10494-72: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-303-1007
Dust And Moisture Seal Protective Cap

123031007
020311137: RNCC: 3 | RNVC: 9

25 Feb 1985

5340-12-321-0129
Mounting Bracket

123210129
2500067-102431.00: RNCC: 2 | RNVC: 2
2500067-102431.00: RNCC: 3 | RNVC: 2

16 Mar 1990

5340-12-393-7704
Lock-Release Lever

123937704
1103412: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-331-7641
Snap Hook

123317641
DIN5299-C200-ZN: RNCC: 2 | RNVC: 2
DIN5299-C200-ZN: RNCC: 3 | RNVC: 2
C200DIN5299-VERZINKT: RNCC: 5 | RNVC: 2
03113200: RNCC: 5 | RNVC: 2
DIN5299-C200-VERZINKT: RNCC: 5 | RNVC: 2

18 Jun 1993

5340-12-338-8134
Mounting Plate

123388134
463-069610.002: RNCC: 3 | RNVC: 9
9893687: RNCC: 5 | RNVC: 9

28 Aug 1995

5340-12-363-8498
Mounting Bracket

123638498
J92226491-403: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-386-3660
Threaded Rod End

123863660
30-018-01-0017351: RNCC: 3 | RNVC: 2

29 Aug 2011

5340-12-176-4604
Door Button

121764604
5801357-4300.11F: RNCC: 2 | RNVC: 2
5801357-4300.11F: RNCC: 3 | RNVC: 2
5801357-4300-11F: RNCC: 5 | RNVC: 2
5801357-4300-11F: RNCC: 5 | RNVC: 2
5801357-4300-11F: RNCC: 5 | RNVC: 9

29 Nov 1978

5340-12-361-6240
Loop Clamp

123616240
DIN3015-LD-2R-16-PA-W5: RNCC: 2 | RNVC: 2

27 Oct 2003

5340-12-701-9023
Loop Clamp

127019023
VG95211-ML-127019023: RNCC: 2 | RNVC: 2
N1119-185: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-340-4497
Resilient Mount

123404497
0118090/11MN60: RNCC: 3 | RNVC: 2
0118 090-11MN60: RNCC: 5 | RNVC: 2

16 Apr 1996

5340-12-390-3896
Loop Clamp

123903896
DIN3016-1-D1-10X9-W1-2-NBR: RNCC: 2 | RNVC: 2

7 Nov 2012

5340-12-341-6973
Mounting Plate

123416973
03.165.56.02.0: RNCC: 3 | RNVC: 2

16 Oct 1996

5340-12-383-5110
Mechanical Stop

123835110
1614170: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-12-326-3828
Mounting Bracket

123263828
6175800022: RNCC: 2 | RNVC: 2
6175800022: RNCC: 3 | RNVC: 2

9 Sep 1991

5340-12-387-5010
Mounting Bracket

123875010
X51520200004: RNCC: 3 | RNVC: 2

3 Jan 2012

5340-12-345-7028
Blank Panel

123457028
3060534: RNCC: 3 | RNVC: 2

16 Apr 1998

5340-12-374-8632
Buckle

123748632
S254: RNCC: 3 | RNVC: 2

1 Apr 2008

5340-12-338-3602
Handwheel

123383602
2.2056: RNCC: 3 | RNVC: 2
2-2056: RNCC: 5 | RNVC: 2

27 Jun 1995

5340-12-365-3495
Mounting Bracket

123653495
8097 798 102: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-12-181-2370
Electrical-Mechanical Equipment Post

121812370
1040-12-00-014-10: RNCC: 3 | RNVC: 2
81.27505-0010: RNCC: 5 | RNVC: 2
81275050010: RNCC: 5 | RNVC: 2
1040-12-00-014-10: RNCC: 5 | RNVC: 9

5 Nov 1979

5340-12-355-1520
Mounting Bracket

123551520
J21220043-003: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-12-190-2668
Plain Solid Disk

121902668
26 208-001: RNCC: 3 | RNVC: 2
26208-001: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-321-3006
Nonmetallic Solid Wheel

123213006
00465-042-000: RNCC: 3 | RNVC: 2
100812: RNCC: 3 | RNVC: 2
KS 200/50/4K: RNCC: 5 | RNVC: 2
465-42: RNCC: 5 | RNVC: 9
KS200/50/4K: RNCC: 5 | RNVC: 9

30 Apr 1990

5340-12-159-8611
Expansion Shield

121598611
B28-50: RNCC: 3 | RNVC: 2
5800876-463-005: RNCC: 5 | RNVC: 2
5800876-463.005: RNCC: 5 | RNVC: 2
5800876-463-005: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-387-4360
Dust And Moisture Seal Protective Cover

123874360
9384-403: RNCC: 3 | RNVC: 2
26170008: RNCC: 5 | RNVC: 2
LET00518: RNCC: 5 | RNVC: 2

15 Dec 2011

5340-12-310-2131
Spring Tension Clip

123102131
100418-0803.04: RNCC: 2 | RNVC: 2
100418-0803.04: RNCC: 3 | RNVC: 2

22 Apr 1987

5340-12-342-5322
Manual Control Lever

123425322
2300421-181340.000: RNCC: 2 | RNVC: 2
2300421-181340.000: RNCC: 3 | RNVC: 2
9917049: RNCC: 5 | RNVC: 2
2300421-181340.000: RNCC: 5 | RNVC: 9
9917049: RNCC: 5 | RNVC: 9

25 Feb 1997

5340-12-338-8015
Double Angle Bracket

123388015
6700017-203320.00: RNCC: 2 | RNVC: 2
6700017-203320.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-175-2859
Resilient Mount

121752859
735080: RNCC: 3 | RNVC: 2
42187-11000.18: RNCC: 3 | RNVC: 2
6726181: RNCC: 5 | RNVC: 2
57350800041: RNCC: 5 | RNVC: 2
42187-11000-18: RNCC: 5 | RNVC: 9

6 Sep 1978

5340-12-355-5314
Mounting Bracket

123555314
2125-111525.00C: RNCC: 2 | RNVC: 2
2125-111525.00C: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-353-9396
Angle Bracket

123539396
6600211-202000.02: RNCC: 2 | RNVC: 2
6600211-202000.02: RNCC: 3 | RNVC: 2

21 May 2001

5340-12-316-8118
Handle Grip

123168118
51-01621: RNCC: 3 | RNVC: 2

15 Feb 1989

5340-12-198-5593
Angle Bracket

121985593
NO PRIMARY REF 12-198-5593: RNCC: 3 | RNVC: 2
5513 123949: RNCC: 5 | RNVC: 9

9 Feb 1984

5340-12-139-6858
Resilient Mount

121396858
845-AWENTW.2854A38-NR55.ST: RNCC: 3 | RNVC: 2
AWENTW2854A38: RNCC: 3 | RNVC: 2
AWENTW2854A38: RNCC: 5 | RNVC: 2
AWENTW2854A38: RNCC: 5 | RNVC: 2
AWENTW2854A38: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-361-6715
Retaining Strap

123616715
J28230217-401: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-010-0095

5340-12-178-7451
Dust And Moisture Seal Protective Cap

121787451
4507-0.16: RNCC: 3 | RNVC: 2
4507-0-16: RNCC: 5 | RNVC: 2

14 May 1979

5340-12-354-9011
Mounting Bracket

123549011
V6516-00029-102: RNCC: 2 | RNVC: 2
V6516-00029-102: RNCC: 3 | RNVC: 2

4 Sep 2001

5340-12-325-6795
Mending Plate

123256795
050H3304-01: RNCC: 3 | RNVC: 2

28 Jun 1991

5340-12-308-0516
Strap Fastener Loop

123080516
958010-01.10: RNCC: 3 | RNVC: 2

26 Aug 1986

5340-12-198-0451
Angle Bracket

121980451
C42080-A6-C71: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-381-8965
Extension Drawer Slide

123818965
HGT 60-650: RNCC: 3 | RNVC: 2

15 Apr 2010

5340-12-310-2233
Dust And Moisture Seal Protective Cap

123102233
1605777: RNCC: 3 | RNVC: 9

22 Apr 1987

5340-12-351-7969
Mounting Bracket

123517969
1421329033: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-12-385-2463
Loop Clamp

123852463
82974450025: RNCC: 3 | RNVC: 2
82.97445-0025: RNCC: 5 | RNVC: 2

12 May 2011

5340-12-318-8026
Retaining Strap

123188026
5803663-3600: RNCC: 2 | RNVC: 2
7802101360: RNCC: 3 | RNVC: 2
78021 01360: RNCC: 5 | RNVC: 9

18 Aug 1989

5340-12-196-8330
Spring Tension Clip

121968330
588.70-510100-006: RNCC: 3 | RNVC: 2

23 Aug 1983

5340-12-369-4595
Spacing Threaded Standoff

123694595
588.91-736000-004: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-12-333-9326
Mounting Bracket

123339326
S4-9803590: RNCC: 3 | RNVC: 2
S4-9803590: RNCC: 5 | RNVC: 9

24 Feb 1994

5340-12-328-9094
Loop Clamp

123289094
2653-250000.03: RNCC: 2 | RNVC: 2
2653-250000.03: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-303-8704
Loop Clamp

123038704
C122-A11-B12: RNCC: 3 | RNVC: 2

10 May 1985

5340-12-358-9202
Angle Bracket

123589202
3835460543: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-360-3717
Loop Clamp

123603717
0009552232: RNCC: 3 | RNVC: 2
0009552232: RNCC: 5 | RNVC: 2

14 May 2003

5340-12-350-8445
Mounting Bracket

123508445
105-94121.06: RNCC: 3 | RNVC: 2

29 May 2000

5340-12-300-9368
Pad Eye

123009368
1423-112.03(4): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-701-7413
Mounting Bracket

127017413
VG95211-ML-127017413: RNCC: 2 | RNVC: 2
5.12.7613.0260.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-181-0497
Plain Solid Disk

121810497
1-212-000-0124: RNCC: 3 | RNVC: 9
93156981: RNCC: 5 | RNVC: 2
0504294: RNCC: 5 | RNVC: 2
02982532: RNCC: 5 | RNVC: 2
504294: RNCC: 5 | RNVC: 9

19 Oct 1979

5340-12-701-6122
Mounting Bracket

127016122
VG95211-ML-127016122: RNCC: 2 | RNVC: 2
5.12.7010.1460.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-1329
Rod End Clevis

121871329
8-6710-03: RNCC: 2 | RNVC: 2
8-6710-03: RNCC: 3 | RNVC: 2
8-6710-03: RNCC: 5 | RNVC: 9

6 Mar 1981

5340-12-700-8604
Threaded End Tensioning Tie Rod

127008604
VG95211-ML-127008604: RNCC: 2 | RNVC: 2
155N1220-35-1,5-1150: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-195-8971
Retaining Strap

121958971
3595528701: RNCC: 3 | RNVC: 2
5801515-0020-002: RNCC: 5 | RNVC: 2
35955 28701: RNCC: 5 | RNVC: 9

28 Apr 1983

5340-12-391-2788
Filler Opening Cap

123912788
9186-020100-00E: RNCC: 3 | RNVC: 2
456901: RNCC: 5 | RNVC: 2

1 Mar 2013

5340-12-308-0515
Buckle

123080515
958010-01.01: RNCC: 3 | RNVC: 2

26 Aug 1986

5340-12-377-5337
Pipe Hanger

123775337
F11.43386-0041: RNCC: 3 | RNVC: 2
F11.43386-0041: RNCC: 5 | RNVC: 2

22 Jan 2009

5340-12-194-9105
Elbow Catch

121949105
61E21-1A: RNCC: 3 | RNVC: 2
61E21A: RNCC: 5 | RNVC: 2

16 Dec 1982

5340-12-310-5815
Retaining Strap

123105815
2300013-1211.01: RNCC: 2 | RNVC: 2
2300013-1211.01: RNCC: 3 | RNVC: 2
2300013-1211.01: RNCC: 5 | RNVC: 9

4 Jun 1987

5340-12-368-2335
Expansion Plug

123682335
DIN470-52-ST-A3L: RNCC: 2 | RNVC: 2

12 Jan 2006

5340-12-387-0716
Spring Loaded Cylinder Fastener

123870716
03089-14410: RNCC: 3 | RNVC: 2

3 Nov 2011

5340-12-378-1481
Retaining Strap

123781481
0049978190: RNCC: 3 | RNVC: 2

16 Mar 2009

5340-12-349-3446
Swivel Caster

123493446
32 25 10 01: RNCC: 3 | RNVC: 2
32251001: RNCC: 5 | RNVC: 2

29 Oct 1999

5340-12-318-5844
Door Holder

123185844
4357407316: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-12-348-9877
Nonmetallic Bumper

123489877
245/7346-58-00-07: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-330-2767
Webbing Strap

123302767
2500117-80000: RNCC: 2 | RNVC: 2
2500 117-80000: RNCC: 3 | RNVC: 2
2500117-80000: RNCC: 5 | RNVC: 2

26 Nov 1992

5340-12-187-2552
Rigid Caster

121872552
5801698-3010.03: RNCC: 2 | RNVC: 2
5801698-3010.03: RNCC: 3 | RNVC: 2
021-3010.03: RNCC: 5 | RNVC: 2
5801698-3010-03: RNCC: 5 | RNVC: 2
5801698-3010.03: RNCC: 5 | RNVC: 9

23 Mar 1981

5340-12-335-7751
Clamping Catch

123357751
112L31-2X1AA: RNCC: 3 | RNVC: 2
112-L31-2X1AA: RNCC: 5 | RNVC: 2

15 Sep 1994

5340-12-306-3560
Angle Bracket

123063560
P-230330-005: RNCC: 3 | RNVC: 2
P230330-005: RNCC: 5 | RNVC: 2

24 Feb 1986

5340-12-169-2629
Loop Clamp

121692629
DIN3016-G1-132X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-132X20-W1-2: RNCC: 3 | RNVC: 2
SP132/20SKZ: RNCC: 3 | RNVC: 2
1510000132: RNCC: 5 | RNVC: 2
SP132-20SKZ: RNCC: 5 | RNVC: 2
VG95931-G132X20-W1: RNCC: 5 | RNVC: 9
VG95931G132X20W1: RNCC: 5 | RNVC: 9

3 May 1977

5340-12-162-5243
Loop Clamp

121625243
100356-300000.02: RNCC: 2 | RNVC: 2
100356-300000.02: RNCC: 3 | RNVC: 2
100356-300000-02: RNCC: 5 | RNVC: 2
100356-300000.02: RNCC: 5 | RNVC: 2
100356-300000-02: RNCC: 5 | RNVC: 9
100356-300000.02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-383-1424
Mounting Bracket

123831424
4151-2512: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-12-303-5089
Extension Drawer Slide

123035089
C79123-F738-A1: RNCC: 3 | RNVC: 2
71-02-011-201: RNCC: 5 | RNVC: 2

28 Mar 1985

5340-12-179-3582
Spring Tension Clip

121793582
44-14479: RNCC: 3 | RNVC: 2

25 Jun 1979

5340-12-182-2002
Rigid Caster

121822002
2300033-311000-23: RNCC: 2 | RNVC: 2
2300033-311000.23: RNCC: 5 | RNVC: 9
FTW302-03-15-23B: RNCC: 5 | RNVC: 9
2300033-311000-23: RNCC: 5 | RNVC: 9

18 Jan 1980

5340-12-336-9199
Webbing Strap

123369199
374-186312.000: RNCC: 3 | RNVC: 9
9843813: RNCC: 5 | RNVC: 9
000-F2-25X2X550-PE-RAL6031: RNCC: 6 | RNVC: 9

28 Dec 1994

5340-12-327-4348
Mounting Bracket

123274348
1000173-341502.000.0: RNCC: 2 | RNVC: 2
1000173-341502.000.0: RNCC: 3 | RNVC: 2

22 Jan 1992

5340-12-336-9200
Webbing Strap

123369200
P08501: RNCC: 3 | RNVC: 2
P 08 501: RNCC: 5 | RNVC: 2

28 Dec 1994

5340-12-702-1661
Mounting Bracket

127021661
VG95211-ML-127021661: RNCC: 2 | RNVC: 2
30.7100.1271: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-338-1231
Mounting Plate

123381231
230-379.34: RNCC: 3 | RNVC: 2
PK-HH-173: RNCC: 5 | RNVC: 9

26 May 1995

5340-12-702-1721
Mounting Bracket

127021721
VG95211-ML-127021721: RNCC: 2 | RNVC: 2
30.7143.70: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-159-0517
Electrical-Mechanical Equipment Post

121590517
VG95148B10XM4X100-ST: RNCC: 2 | RNVC: 2
VG95148B10XM4X100-ST: RNCC: 3 | RNVC: 2
51-2404-226-01: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-157-8478
Dust And Moisture Seal Protective Plug

121578478
TL4-105: RNCC: 3 | RNVC: 1
4402-0000-0003: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-168-1843
Butt Hinge

121681843
LN9172KFF1000: RNCC: 2 | RNVC: 2
LN9172FF1000: RNCC: 5 | RNVC: 2
30X1000LN9172: RNCC: 5 | RNVC: 2
85-608-5565: RNCC: 6 | RNVC: 9

23 Feb 1977

5340-12-331-3622
Mounting Plate

123313622
200418: RNCC: 3 | RNVC: 2
24K03-0084-00.003: RNCC: 5 | RNVC: 2

28 Apr 1993

5340-12-315-0231
Angle Bracket

123150231
5803604-000110.00: RNCC: 2 | RNVC: 2
1830427-120: RNCC: 3 | RNVC: 2
5803604-000110.00: RNCC: 5 | RNVC: 2

8 Sep 1988

5340-12-333-5526
Lock-Release Lever

123335526
G32960-W0183-C144: RNCC: 3 | RNVC: 2

5 Jan 1994

5340-12-350-2509
Angle Bracket

123502509
2125-114130.30B: RNCC: 2 | RNVC: 2
2125-114130.30B: RNCC: 3 | RNVC: 2

8 Mar 2000

5340-12-702-2145
Angle Bracket

127022145
VG95211-ML-127022145: RNCC: 2 | RNVC: 2
30.7222.1020: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-198-4464
Mending Plate

121984464
4020701040: RNCC: 3 | RNVC: 2

30 Jan 1984

5340-12-377-8932
Mounting Bracket

123778932
0425 1605: RNCC: 3 | RNVC: 2

20 Feb 2009

5340-12-358-2879
Mounting Bracket

123582879
1587250: RNCC: 3 | RNVC: 2

8 Oct 2002

5340-12-182-1595
Retaining Strap

121821595
4114920119: RNCC: 3 | RNVC: 2

16 Jan 1980

5340-12-339-2580
Resilient Mount

123392580
GB530-NR5: RNCC: 3 | RNVC: 2
GB530-NR5: RNCC: 5 | RNVC: 2
GB530-NR5: RNCC: 5 | RNVC: 9

31 Oct 1995

5340-12-341-0175
Access Cover

123410175
3-10430: RNCC: 3 | RNVC: 2

17 Jul 1996

5340-12-357-7773
Access Cover

123577773
862321001: RNCC: 3 | RNVC: 2

23 Jul 2002

5340-12-409-5548

5340-12-370-5773
Loop Clamp

123705773
6174900242: RNCC: 3 | RNVC: 2

24 Nov 2006

5340-12-360-9923
Metal Grille

123609923
15030101: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-343-2752
Dust And Moisture Seal Protective Cap

123432752
1246-007: RNCC: 3 | RNVC: 2

27 May 1997

5340-12-318-1618
Mounting Plate

123181618
R04553-102: RNCC: 3 | RNVC: 2

16 Jun 1989

5340-12-374-9488
Mounting Bracket

123749488
279.657 193: RNCC: 2 | RNVC: 2
279.657 193: RNCC: 3 | RNVC: 2

9 Apr 2008

5340-12-347-4897
Angle Bracket

123474897
88.8281.5386: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-12-333-5196
Angle Bracket

123335196
10 0032 709: RNCC: 3 | RNVC: 2
100032709: RNCC: 5 | RNVC: 2
3522 589 08211: RNCC: 5 | RNVC: 2
352258908211: RNCC: 5 | RNVC: 2

29 Dec 1993

5340-12-369-6785
Mounting Plate

123696785
863814301: RNCC: 3 | RNVC: 2

8 Aug 2006

5340-12-370-1400
Angle Bracket

123701400
865344307: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-12-377-2265
Access Cover

123772265
0118 1410: RNCC: 3 | RNVC: 2

18 Dec 2008

5340-12-377-8944
Mending Plate

123778944
0420 7012: RNCC: 3 | RNVC: 2

20 Feb 2009

5340-12-332-3110
Access Cover

123323110
8605 002 106: RNCC: 3 | RNVC: 2
8605002106: RNCC: 5 | RNVC: 9

27 Jul 1993

5340-12-701-5866
Rod End Connector

127015866
VG95211-ML-127015866: RNCC: 2 | RNVC: 2
5.12.6500.0480.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-341-1972
Handwheel

123411972
0101220137: RNCC: 3 | RNVC: 2
0101 220 137: RNCC: 5 | RNVC: 2
12.006 150MM POS 6: RNCC: 5 | RNVC: 2

8 Aug 1996

5340-12-331-8049
Mounting Bracket

123318049
702-260019-903-0: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-12-701-5168
Mounting Plate

127015168
VG95211-ML-127015168: RNCC: 2 | RNVC: 2
5.12.6100.3050.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-306-4012
Mending Plate

123064012
V22.917.3-22: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-342-7400
Mounting Bracket

123427400
79.076.14.401: RNCC: 3 | RNVC: 2
0938884: RNCC: 5 | RNVC: 2
0938884: RNCC: 5 | RNVC: 9

24 Mar 1997

5340-12-344-5665
Dust And Moisture Seal Protective Plug

123445665
NO PRIMARY REF 12-344-5665: RNCC: 3 | RNVC: 2
0528.8500.00: RNCC: 5 | RNVC: 2
528.8500: RNCC: 5 | RNVC: 2
5288500: RNCC: 5 | RNVC: 2
H 2 A: RNCC: 5 | RNVC: 9

7 Nov 1997

5340-12-312-5976
Mounting Bracket

123125976
987-111100.01.0: RNCC: 3 | RNVC: 2
987-111100.01.0: RNCC: 5 | RNVC: 9

20 Jan 1988

5340-12-198-5875
Double Angle Bracket

121985875
23114-4122.02: RNCC: 2 | RNVC: 2
23114-4122.02: RNCC: 3 | RNVC: 2
23114-4122.02: RNCC: 5 | RNVC: 2
23114-4122.02: RNCC: 5 | RNVC: 9
23114-4122-02: RNCC: 5 | RNVC: 9
23114-4122.02: RNCC: 5 | RNVC: 9
23114-4122-02: RNCC: 5 | RNVC: 9

14 Feb 1984

5340-12-304-7202
Mending Plate

123047202
2300126-120000.005.0: RNCC: 2 | RNVC: 2
2300126-120000.005.0: RNCC: 3 | RNVC: 2
2300126-120000.005.0: RNCC: 5 | RNVC: 2
2300126-120000.005.0: RNCC: 5 | RNVC: 9

15 Aug 1985

5340-12-355-9505
Access Cover

123559505
J92220656-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-382-9431
Mending Plate

123829431
1036185-1: RNCC: 3 | RNVC: 2

26 Aug 2010

5340-12-332-7641
Mounting Bracket

123327641
537236-0298.000: RNCC: 3 | RNVC: 2
537236-0298.000: RNCC: 5 | RNVC: 9

15 Sep 1993

5340-12-319-9293
Angle Bracket

123199293
5802006-201111.00: RNCC: 2 | RNVC: 2
5802006-201111.00: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-12-191-1122
Access Cover

121911122
42013116: RNCC: 3 | RNVC: 2
42013116ED5056-80: RNCC: 5 | RNVC: 2

13 Jan 1982

5340-12-380-7675
Snap Hook

123807675
71823: RNCC: 3 | RNVC: 2

26 Nov 2009

5340-12-361-3356
Angle Bracket

123613356
51974850052: RNCC: 3 | RNVC: 2
51.97485-0052: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-358-0581
Angle Bracket

123580581
J92220351-003: RNCC: 3 | RNVC: 2

9 Sep 2002

5340-12-312-7506
Strap Bolt

123127506
23114-0450.02: RNCC: 2 | RNVC: 2
23114-0450.02: RNCC: 3 | RNVC: 2
23114-0450.02: RNCC: 5 | RNVC: 9
9864712: RNCC: 5 | RNVC: 9

2 Feb 1988

5340-12-322-7631
Manual Control Handle

123227631
8100397-2600: RNCC: 2 | RNVC: 2
8100397-2600: RNCC: 3 | RNVC: 2

19 Sep 1990

5340-12-182-3243
Retaining Strap

121823243
2300033-302000-02: RNCC: 2 | RNVC: 2
2300033-302000.02: RNCC: 5 | RNVC: 9
2300033-302000-02: RNCC: 5 | RNVC: 9

25 Jan 1980

5340-12-166-9100
Retaining Strap

121669100
5800748-11.139: RNCC: 3 | RNVC: 2
5800748-11-139: RNCC: 5 | RNVC: 9

29 Oct 1976

5340-12-384-5455
Angle Bracket

123845455
H1.1643-27-01-20.00-01: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-12-348-9874
Access Cover

123489874
245/7346-49-15-00: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-199-4209
Sliding Stay

121994209
2300088-310623.00: RNCC: 2 | RNVC: 2
2300088-310623-00: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-324-2387
Nonmetallic Bumper

123242387
NO PRIMARY REF 12-324-2387: RNCC: 3 | RNVC: 2
06: RNCC: 5 | RNVC: 9
065196: RNCC: 5 | RNVC: 9

30 Jan 1991

5340-12-303-9074
Nonmetallic Bumper

123039074
NO PRIMARY REF 12-303-9074: RNCC: 3 | RNVC: 2
6731 155031: RNCC: 5 | RNVC: 9

20 May 1985

5340-12-322-8815
Resilient Mount

123228815
0786154: RNCC: 3 | RNVC: 2
845-0786154.NR55.ST: RNCC: 5 | RNVC: 2
0786154: RNCC: 5 | RNVC: 9

2 Oct 1990

5340-12-347-8719
Blank Panel

123478719
409066188: RNCC: 3 | RNVC: 2
5L.6097.014.25: RNCC: 5 | RNVC: 2
409-066 188: RNCC: 5 | RNVC: 2

1 Mar 1999

5340-12-194-5247
Lock-Release Lever

121945247
20-5160-078: RNCC: 3 | RNVC: 2

12 Nov 1982

5340-12-172-9392
Nonmetallic Bumper

121729392
23290-151025.005: RNCC: 2 | RNVC: 2
23290-151025.005: RNCC: 3 | RNVC: 2
23290-151025-005: RNCC: 5 | RNVC: 2
23290-151025-005: RNCC: 5 | RNVC: 9
23290-151025-005: RNCC: 5 | RNVC: 9
23290-151025.005: RNCC: 5 | RNVC: 9

6 Mar 1978

5340-12-334-5170
Plug Button

123345170
4507-3521.01N: RNCC: 3 | RNVC: 2
4507-3521-01N: RNCC: 5 | RNVC: 2

18 May 1994

5340-12-365-1470
Mounting Bracket

123651470
536077-0675.000: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-308-1030
Rod End Clevis

123081030
09.171.02.02.0: RNCC: 3 | RNVC: 2

2 Sep 1986

5340-12-349-6199
Mounting Bracket

123496199
46712310871: RNCC: 3 | RNVC: 2
46 71 2 310 871: RNCC: 5 | RNVC: 2

9 Dec 1999

5340-12-319-5214
Access Door

123195214
251829105AE: RNCC: 3 | RNVC: 9

9 Oct 1989

5340-12-183-3489
Angle Bracket

121833489
5801441-30000-001: RNCC: 3 | RNVC: 2
5801441-30000-001: RNCC: 5 | RNVC: 9
5801441-30000.001: RNCC: 5 | RNVC: 9

9 Apr 1980

5340-12-318-1122
Retaining Band

123181122
6100126-0000.11: RNCC: 2 | RNVC: 2
SP8532.258/25SK: RNCC: 3 | RNVC: 2
8791316043: RNCC: 5 | RNVC: 2

13 Jun 1989

5340-12-312-9964
Mounting Bracket

123129964
401805-00: RNCC: 3 | RNVC: 2
9XD401805-00: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-12-173-0028
Retaining Band

121730028
5801557-2000.00: RNCC: 2 | RNVC: 2
5801557-2000.00: RNCC: 3 | RNVC: 2
5801557-2000: RNCC: 5 | RNVC: 2
5801557-2000: RNCC: 5 | RNVC: 9

13 Mar 1978

5340-12-328-5504
Bow Handle

123285504
039-3622L: RNCC: 3 | RNVC: 2
39-3622L: RNCC: 3 | RNVC: 2

2 Jun 1992

5340-12-304-1436
Hinge Torsion Bar

123041436
LN9373-4X306: RNCC: 2 | RNVC: 2

14 Jun 1985

5340-12-701-8550
Loop Clamp

127018550
VG95211-ML-127018550: RNCC: 2 | RNVC: 2
5891A-14: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-6017
Rod End Clevis

121876017
DIN71752-G10X40-A3P: RNCC: 2 | RNVC: 2
X10X40DIN71752A4C: RNCC: 3 | RNVC: 2
01133924: RNCC: 5 | RNVC: 2
1133924EY8836-09: RNCC: 5 | RNVC: 2

21 Apr 1981

5340-12-314-6928
Catch Strike

123146928
V951L7-1AJ: RNCC: 3 | RNVC: 2
080F48500: RNCC: 5 | RNVC: 2

29 Jul 1988

5340-12-302-8327
Mending Plate

123028327
4900123-1900.02: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-388-6350
Access Cover

123886350
5842030974: RNCC: 3 | RNVC: 2

5 Apr 2012

5340-12-373-1643
Nonmetallic Bumper

123731643
1104760084: RNCC: 3 | RNVC: 2
110 476 00 84: RNCC: 5 | RNVC: 2
A1104760084: RNCC: 5 | RNVC: 9

5 Oct 2007

5340-12-380-0534
Mechanical Stop

123800534
242/7383-02-54-00: RNCC: 3 | RNVC: 2

23 Sep 2009

5340-12-360-6572
Webbing Strap

123606572
T41688128: RNCC: 3 | RNVC: 2
63-T41688128: RNCC: 5 | RNVC: 2

25 Jun 2003

5340-12-325-7587
Schlosz Schluessel

123257587
SCHLUESSEL 4010LI-BC0271: RNCC: 3 | RNVC: 2
BC0271: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-151-8956
Resilient Mount

121518956
113E112: RNCC: 3 | RNVC: 2
845-113E112: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-184-1532
Friction Catch

121841532
3820-20MM: RNCC: 3 | RNVC: 2

28 Jun 1980

5340-12-336-9616
Strap Fastener Loop

123369616
2500243-989000.03: RNCC: 2 | RNVC: 2
2768.03-9000.03: RNCC: 3 | RNVC: 2
2500243-989000.03: RNCC: 5 | RNVC: 2

2 Jan 1995

5340-12-198-1916
Helical Compression Spring Seat

121981916
1420328050: RNCC: 3 | RNVC: 2
0128 8572: RNCC: 5 | RNVC: 2
01288572EY0148-17: RNCC: 5 | RNVC: 2
1420328050: RNCC: 5 | RNVC: 2
VDPM00707: RNCC: 5 | RNVC: 2

28 Dec 1983

5340-12-365-0966
Pawl Fastener

123650966
1000-U348: RNCC: 3 | RNVC: 2
407798: RNCC: 5 | RNVC: 2

27 Nov 2004

5340-12-347-8166
Nonmetallic Bumper

123478166
2300421-181000.003: RNCC: 2 | RNVC: 2
9917675: RNCC: 3 | RNVC: 2
2300421-181000.003: RNCC: 5 | RNVC: 2
9917675: RNCC: 5 | RNVC: 9
2300421-181000.003: RNCC: 5 | RNVC: 9

17 Feb 1999

5340-12-317-3208
Angle Bracket

123173208
4900064-41212.012: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-350-4039
Loop Clamp Kit

123504039
SL-3306: RNCC: 3 | RNVC: 2
SL 3306: RNCC: 5 | RNVC: 2

28 Mar 2000

5340-12-348-7989
Mechanical Stop

123487989
009-240.100-018: RNCC: 3 | RNVC: 2

20 Aug 1999

5340-12-177-2477
Retaining Strap

121772477
PAN4173-100: RNCC: 3 | RNVC: 2

22 Jan 1979

5340-12-320-7608
Nonmetallic Bumper

123207608
335909-0115.000: RNCC: 2 | RNVC: 2
335909-0115.000: RNCC: 3 | RNVC: 2
335909-0115.000: RNCC: 5 | RNVC: 9

14 Feb 1990

5340-12-349-4490
Clamping Catch

123494490
VG95211-ML-123494490: RNCC: 2 | RNVC: 2
000000-0086.272: RNCC: 3 | RNVC: 2
000000-0086.272: RNCC: 5 | RNVC: 2
000000-0086.272: RNCC: 5 | RNVC: 9

17 Nov 1999

5340-12-165-9025
Expansion Plug

121659025
23111-9701-09: RNCC: 2 | RNVC: 2

15 Jul 1976

5340-12-391-4092
Loop Clamp

123914092
06670490005: RNCC: 3 | RNVC: 2
06.67049-0005: RNCC: 5 | RNVC: 9

11 Mar 2013

5340-12-194-0149
Rod End Connector

121940149
20-5660-014: RNCC: 3 | RNVC: 2

23 Sep 1982

5340-12-198-1879
Bridge Clamp

121981879
1300061-120100-02: RNCC: 2 | RNVC: 2
7830034: RNCC: 3 | RNVC: 2
1300061-120100-02: RNCC: 5 | RNVC: 2
7830-034: RNCC: 5 | RNVC: 2
1300061-120100-02: RNCC: 5 | RNVC: 9

28 Dec 1983

5340-12-164-5207
Halter

121645207
23290-181143: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-309-7946
Access Cover

123097946
5056582: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-091-2728

5340-12-182-5196
Electrical-Mechanical Equipment Post

121825196
81482405032: RNCC: 3 | RNVC: 2

8 Feb 1980

5340-12-302-0142
Loop Clamp

123020142
51.6816.050.09: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-12-302-9869
Mending Plate

123029869
2854241574: RNCC: 3 | RNVC: 2

15 Feb 1985

5340-12-300-2796
Spring Tension Clip

123002796
3099950240: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-339-4924
Mending Plate

123394924
88974800449: RNCC: 3 | RNVC: 2
88.97480.0449: RNCC: 5 | RNVC: 2

28 Nov 1995

5340-12-199-3567
Retaining Clip

121993567
069109150: RNCC: 3 | RNVC: 2
069 109 150: RNCC: 5 | RNVC: 2
069 109 150: RNCC: 5 | RNVC: 2

14 Apr 1984

5340-12-004-0059

5340-12-186-1459
Electrical-Mechanical Equipment Post

121861459
512206-4203.000: RNCC: 3 | RNVC: 2
512206-4203: RNCC: 5 | RNVC: 2
512206-4203-000: RNCC: 5 | RNVC: 2

2 Dec 1980

5340-12-311-3756
Double Angle Bracket

123113756
2300227-061111.000: RNCC: 2 | RNVC: 2
2300227-061111.000: RNCC: 3 | RNVC: 2
2300227-061111.000: RNCC: 5 | RNVC: 9

25 Aug 1987

5340-12-343-5941
Mounting Bracket

123435941
5803824-10000.00: RNCC: 2 | RNVC: 2
5803824-10000.00: RNCC: 5 | RNVC: 2

8 Jul 1997

5340-12-355-5317
Mechanical Stop

123555317
2125-129840A00C: RNCC: 2 | RNVC: 2
2125-129840A00C: RNCC: 3 | RNVC: 2

22 Nov 2001

5340-12-123-2202
Retaining Strap

121232202
03303428: RNCC: 3 | RNVC: 2
3303428EF5011-90: RNCC: 5 | RNVC: 2
58153: RNCC: 5 | RNVC: 2
169620401: RNCC: 5 | RNVC: 2
58153: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-183-1680
Expansion Shield

121831680
212ID0037-000: RNCC: 3 | RNVC: 2
04309331: RNCC: 5 | RNVC: 2
4309331EE5516-34: RNCC: 5 | RNVC: 2

25 Mar 1980

5340-12-320-6494
Support Hook

123206494
4900059-751315.000.0: RNCC: 3 | RNVC: 2
1283103: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-352-5697
Spacing Threaded Standoff

123525697
5.13.251: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-358-7089
Access Cover

123587089
2481-392880.000.0: RNCC: 2 | RNVC: 2
2481-392880.000.0: RNCC: 3 | RNVC: 2

7 Nov 2002

5340-12-162-5835
Resilient Mount

121625835
845-81.96210.0121: RNCC: 3 | RNVC: 2
81962100121: RNCC: 3 | RNVC: 2
81.96210.0121: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-301-4706
Double Angle Bracket

123014706
2500109-195900.00.0: RNCC: 3 | RNVC: 2
2500109-195900-00-0: RNCC: 5 | RNVC: 2
2500109-195900.00.0: RNCC: 5 | RNVC: 9
2500109-195900-00-0: RNCC: 5 | RNVC: 9

18 Oct 1984

5340-12-359-7307
Access Cover

123597307
S281M2011208: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-702-9391
Pawl Fastener

127029391
VG95211-ML-127029391: RNCC: 2 | RNVC: 2
AEK-18: RNCC: 3 | RNVC: 2
0500891996099: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-384-1066
Bumper

123841066
DIN95364-A15X14-NR55ST: RNCC: 2 | RNVC: 2

21 Jan 2011

5340-12-702-8550
Mounting Bracket

127028550
53-04045003574: RNCC: 2 | RNVC: 2

4 Jan 1996

5340-12-381-3168
Double Angle Bracket

123813168
2300388-060950.000: RNCC: 2 | RNVC: 2
2300388-060950.000: RNCC: 3 | RNVC: 2

1 Feb 2010

5340-12-308-2895
Angle Bracket

123082895
5802017-701460.00: RNCC: 2 | RNVC: 2
5802017-701460.00: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-341-9634
Lock-Release Lever

123419634
67.4000.9001: RNCC: 3 | RNVC: 2
7362956: RNCC: 5 | RNVC: 2
600E226: RNCC: 5 | RNVC: 2
600E226: RNCC: 5 | RNVC: 2
7362956: RNCC: 5 | RNVC: 2

21 Nov 1996

5340-12-361-6453
Retaining Strap

123616453
X206A03-61: RNCC: 3 | RNVC: 2
X206A03-61: RNCC: 3 | RNVC: 9

29 Oct 2003

5340-12-177-4370
Plain Solid Disk

121774370
F106 VERZINKT: RNCC: 3 | RNVC: 2
81.96240-0032: RNCC: 5 | RNVC: 2
81962400032: RNCC: 5 | RNVC: 2
F106: RNCC: 5 | RNVC: 2

31 Jan 1979

5340-12-383-4044
Spring Loaded Cylinder Fastener

123834044
SP108: RNCC: 3 | RNVC: 2
1MTA-030101-00A: RNCC: 5 | RNVC: 2

18 Oct 2010

5340-12-325-5156
Lock-Release Lever

123255156
4124015: RNCC: 3 | RNVC: 2
5014-071: RNCC: 5 | RNVC: 2

12 Jun 1991

5340-12-177-2523
Angle Bracket

121772523
5801215-16211-002: RNCC: 3 | RNVC: 2
5801215-16211.002: RNCC: 5 | RNVC: 2

22 Jan 1979

5340-12-346-7491
Friction Catch

123467491
64-10-124-55: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-702-7633
Mounting Bracket

127027633
50-06100370035: RNCC: 2 | RNVC: 2

15 Dec 1995

5340-12-366-5318
Rod End Clevis

123665318
84150/1255-08: RNCC: 3 | RNVC: 2

3 May 2005

5340-12-350-2866
Access Cover

123502866
VG95211-ML-123502866: RNCC: 2 | RNVC: 2
V6507-75009-045: RNCC: 3 | RNVC: 2

13 Mar 2000

5340-12-350-3490
Double Angle Bracket

123503490
V6550-06001-159: RNCC: 2 | RNVC: 2
V6550-06001-159: RNCC: 3 | RNVC: 2

20 Mar 2000

5340-12-176-2790
Webbing Strap

121762790
23290-151070: RNCC: 2 | RNVC: 2
23290-151070: RNCC: 3 | RNVC: 2
983 238-257: RNCC: 3 | RNVC: 2
23290-151070: RNCC: 3 | RNVC: 9
23290-151070: RNCC: 5 | RNVC: 2
23290-151070: RNCC: 5 | RNVC: 9
23290-151070: RNCC: 5 | RNVC: 9
000-C1-25X2,5X550-BW-RAL6031: RNCC: 6 | RNVC: 9

23 Nov 1978

5340-12-340-3002
Mounting Plate

123403002
87-401.20-12.00-05: RNCC: 3 | RNVC: 2

22 Mar 1996

5340-12-356-6207
Manual Control Lever

123566207
2500261-183480.000.0: RNCC: 2 | RNVC: 2
2500261-183480.000.0: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-315-7180
Access Cover

123157180
23305-205000.13.0: RNCC: 2 | RNVC: 2
23305-205000.13.0: RNCC: 3 | RNVC: 2

23 Nov 1988

5340-12-318-9373
Ball Socket Seat

123189373
23305-069950.05.0: RNCC: 3 | RNVC: 2
23305-069950.05.0: RNCC: 5 | RNVC: 9

25 Aug 1989

5340-12-196-9557
Mending Plate

121969557
A-295090-407: RNCC: 3 | RNVC: 2
A295090-407: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-321-4892
Nonmetallic Bumper

123214892
704-152712-902-0: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-701-6297
Angle Bracket

127016297
VG95211-ML-127016297: RNCC: 2 | RNVC: 2
5.12.7050.0040.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6705
Blank Panel

127016705
VG95211-ML-127016705: RNCC: 2 | RNVC: 2
5.12.7211.1060.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-355-0872
Bow Handle

123550872
8399-0016: RNCC: 2 | RNVC: 2
8399-0016: RNCC: 3 | RNVC: 2

4 Oct 2001

5340-12-317-2896
Nonmetallic Bumper

123172896
9151830662: RNCC: 3 | RNVC: 2
467-418/5183-04-14-00: RNCC: 5 | RNVC: 2

28 Mar 1989

5340-12-313-4606
Mounting Bracket

123134606
2300013-5530.04: RNCC: 2 | RNVC: 2
2300013-5530.04: RNCC: 3 | RNVC: 2
2300013-5530.04: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-370-7895
Webbing Strap

123707895
01-300 02504: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-12-311-8444
Catch Strike

123118444
5801313-905.18: RNCC: 2 | RNVC: 2
5801313-905.18: RNCC: 3 | RNVC: 2

22 Oct 1987

5340-12-389-1406
Expansion Shield

123891406
924172: RNCC: 3 | RNVC: 2
924172: RNCC: 5 | RNVC: 2
2500601770: RNCC: 5 | RNVC: 2
07402218: RNCC: 5 | RNVC: 2

30 May 2012

5340-12-349-3348
Angle Bracket

123493348
5803649-201300.01: RNCC: 2 | RNVC: 2
5803649-201300.01: RNCC: 3 | RNVC: 2

28 Oct 1999

5340-12-166-4672
Retaining Strap

121664672
DIN72573-4X4-ST-ZN: RNCC: 2 | RNVC: 2
DIN72573-4X4-ST-ZN: RNCC: 3 | RNVC: 2
21480: RNCC: 5 | RNVC: 9
72573032-97: RNCC: 5 | RNVC: 9
DIN72573-4X4-ST: RNCC: 5 | RNVC: 9
4X4DIN72573ST: RNCC: 5 | RNVC: 9
DIN72573-4X4-ST: RNCC: 5 | RNVC: 9

9 Sep 1976

5340-12-163-5085
Retaining Strap

121635085
23290-091000.001: RNCC: 2 | RNVC: 2
23290-091000.001: RNCC: 3 | RNVC: 2
23290-091000.001: RNCC: 3 | RNVC: 2
23290-091000-001: RNCC: 5 | RNVC: 9
23290-091000.001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-309-8226
Webbing Strap

123098226
2300121-983230.000.0: RNCC: 2 | RNVC: 2
2300121-983230.000.0: RNCC: 3 | RNVC: 2
000-F2-25X1,0X480-BW-RAL6031: RNCC: 6 | RNVC: 9

6 Mar 1987

5340-12-701-6286
Mounting Bracket

127016286
VG95211-ML-127016286: RNCC: 2 | RNVC: 2
5.12.7050.0013.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-703-3071
Mending Plate

127033071
VG95211-ML-127033071: RNCC: 2 | RNVC: 2
5.12.2210.1604.02: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-343-6694
Multiple Angle Bracket

123436694
2300002-100110.001: RNCC: 2 | RNVC: 2
9915138: RNCC: 3 | RNVC: 9
2300002-100110.001: RNCC: 5 | RNVC: 2
2300002-100110.001: RNCC: 5 | RNVC: 9

14 Jul 1997

5340-12-194-3805
Mending Plate

121943805
V22.498.772-03: RNCC: 3 | RNVC: 2
V22-498-772-03: RNCC: 5 | RNVC: 2

27 Oct 1982

5340-12-300-7983
Webbing Strap

123007983
23114-4174.01: RNCC: 2 | RNVC: 2
23114-4174.01: RNCC: 3 | RNVC: 2
23114-4174.01: RNCC: 3 | RNVC: 2
23114-4174-01: RNCC: 5 | RNVC: 9
23114-4174.01: RNCC: 5 | RNVC: 9
23114-4174-01: RNCC: 5 | RNVC: 9
23114-4174.01: RNCC: 5 | RNVC: 9
23114-4174.01: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-700-4253
Hand Crank

127004253
51-088127034: RNCC: 2 | RNVC: 2
765.93.SB194: RNCC: 5 | RNVC: 9

9 May 1992

5340-12-154-5735
Spring Tension Clip

121545735
C42117-A248-C216: RNCC: 3 | RNVC: 2
5800583-097205-003: RNCC: 5 | RNVC: 2
5800583-097205.003: RNCC: 5 | RNVC: 2
C42117A248C216: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-140-2062
Dust And Moisture Seal Protective Cap

121402062
R21036: RNCC: 3 | RNVC: 2
4060-235: RNCC: 3 | RNVC: 2
4060235: RNCC: 5 | RNVC: 2
R21036: RNCC: 5 | RNVC: 9
42094-060-18: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-372-9265
Mounting Bracket

123729265
NO PRIMARY REF 12-372-9265: RNCC: 3 | RNVC: 2
7092148: RNCC: 5 | RNVC: 2

7 Sep 2007

5340-12-346-5817
Strap Hinge

123465817
5052-18030201: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-12-702-2303
Retaining Strap

127022303
VG95211-ML-127022303: RNCC: 2 | RNVC: 2
30.7616.90: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-389-7110
Swivel Caster

123897110
LH-POEV-200R-ST: RNCC: 3 | RNVC: 2

16 Aug 2012

5340-12-198-3698
Webbing Strap

121983698
4900123-3512.00: RNCC: 2 | RNVC: 2
4900123-3512.00: RNCC: 3 | RNVC: 2
000-D3-30X2,0X1000-PE-RAL6031: RNCC: 6 | RNVC: 9

23 Jan 1984

5340-12-353-6872
Multiple Angle Bracket

123536872
J92222443-001: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-393-8089
Mounting Bracket

123938089
J28230243-001: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-12-317-9581
Electrical-Mechanical Equipment Post

123179581
1857320: RNCC: 3 | RNVC: 2
97E2.159.06-5: RNCC: 5 | RNVC: 2

30 May 1989

5340-12-142-7363
S Sicherungsplatte

5340-12-347-2987
Access Cover

123472987
C-299693: RNCC: 3 | RNVC: 2
299 693: RNCC: 5 | RNVC: 2

24 Nov 1998

5340-12-307-5873
Nonmetallic Bumper

123075873
F19706: RNCC: 3 | RNVC: 2
4.771.321.000: RNCC: 5 | RNVC: 2
169706: RNCC: 5 | RNVC: 2

4 Jul 1986

5340-12-197-9377
Metal Runner

121979377
CF 478 238 A: RNCC: 2 | RNVC: 2
CF 478 238 A: RNCC: 3 | RNVC: 2
CF 478 238: RNCC: 5 | RNVC: 2
CF 478 238 A: RNCC: 5 | RNVC: 2
CF 478 238: RNCC: 5 | RNVC: 2

2 Dec 1983

5340-12-305-9518
Mending Plate

123059518
4/0930/7028/1: RNCC: 2 | RNVC: 2
4/0930/7028/1: RNCC: 3 | RNVC: 2

14 Jan 1986

5340-12-381-7634
Retaining Strap

123817634
Q/120-124: RNCC: 3 | RNVC: 2

29 Mar 2010

5340-12-199-1570
Mending Plate

121991570
0289 0555: RNCC: 3 | RNVC: 2
2890555: RNCC: 5 | RNVC: 2
2890555ED0693-79: RNCC: 5 | RNVC: 2

30 Mar 1984

5340-12-094-6434

5340-12-337-7083
Nonmetallic Bumper

123377083
WE-3-10-795: RNCC: 3 | RNVC: 2
WE-3-10-795 B: RNCC: 5 | RNVC: 2
GUMMIELEMENT CF-E-135: RNCC: 5 | RNVC: 2
CF-E-135: RNCC: 5 | RNVC: 2

30 Mar 1995

5340-12-320-4772
Helical Compression Spring Seat

123204772
7261005: RNCC: 3 | RNVC: 2
7261 005: RNCC: 5 | RNVC: 2

18 Jan 1990

5340-12-094-4187

5340-12-179-1826
Retaining Strap

121791826
5800884-901162: RNCC: 3 | RNVC: 2

15 Jun 1979

5340-12-186-1610
Clamping Catch

121861610
2906401: RNCC: 3 | RNVC: 2

2 Dec 1980

5340-12-367-9480
Loop Clamp

123679480
6753262640: RNCC: 3 | RNVC: 2

9 Nov 2005

5340-12-388-1945
Nut And Bolt Head Protective Cap

123881945
5000009400009: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-377-3607
Mending Plate

123773607
41244945: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-360-8415
Manual Control Handle

123608415
000000-1074.244: RNCC: 3 | RNVC: 2

16 Jul 2003

5340-12-381-5856
Manual Control Handle

123815856
633410000: RNCC: 3 | RNVC: 2
400405003H: RNCC: 5 | RNVC: 2
40.04.05.003H: RNCC: 5 | RNVC: 2

8 Mar 2010

5340-12-389-8637
Mounting Bracket

123898637
8451111008: RNCC: 3 | RNVC: 2

6 Sep 2012

5340-12-142-9572
Abstandsstueck

121429572
VG95211-ML-121429572: RNCC: 2 | RNVC: 2
A10-27-530-15-0: RNCC: 3 | RNVC: 2
A10-27-530-15-0: RNCC: 5 | RNVC: 2
A10-27-530-15-0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-342-1394
Access Cover

123421394
135A30038: RNCC: 3 | RNVC: 2
135A30038/1: RNCC: 5 | RNVC: 2
135A30038D1: RNCC: 5 | RNVC: 2

18 Dec 1996

5340-12-356-5233
Access Cover

123565233
11.07313-0149: RNCC: 3 | RNVC: 2
11.07313-0420POS005: RNCC: 5 | RNVC: 2

7 Mar 2002

5340-12-355-1081
Clamping Catch

123551081
01000187: RNCC: 3 | RNVC: 2
530S-00: RNCC: 5 | RNVC: 2

9 Oct 2001

5340-12-343-7648
Angle Bracket

123437648
5803571-310420.00: RNCC: 2 | RNVC: 2
5803571-310420.00: RNCC: 3 | RNVC: 2

24 Jul 1997

5340-12-185-1085
Friction Catch

121851085
6031-0000-4108: RNCC: 3 | RNVC: 2
181837249: RNCC: 5 | RNVC: 2

11 Sep 1980

5340-12-317-0366
Access Cover

123170366
NO PRIMARY REF 12-317-0366: RNCC: 3 | RNVC: 2
87734: RNCC: 5 | RNVC: 9
ME55070-A00000000: RNCC: 5 | RNVC: 9

7 Mar 1989

5340-12-371-7015
Webbing Strap

123717015
MEL300-D1-017: RNCC: 3 | RNVC: 2

7 May 2007

5340-12-141-2153
Flush Bolt

121412153
730034-5.8: RNCC: 2 | RNVC: 2
730034-5-8: RNCC: 5 | RNVC: 9
730034-5-8: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-354-0133
Access Cover

123540133
210153: RNCC: 3 | RNVC: 2

28 May 2001

5340-12-376-4300
Mounting Plate

123764300
310.10.0372: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-12-393-0890
Double Angle Bracket

123930890
1030105-259000.001.0: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-12-347-5794
Hasp Staple

123475794
97.0066.0877: RNCC: 3 | RNVC: 2
999999 01631 4 1074 B: RNCC: 5 | RNVC: 2

11 Jan 1999

5340-12-195-1864
Angle Bracket

121951864
1000126-000000.03: RNCC: 2 | RNVC: 2
1000126-000000.03: RNCC: 5 | RNVC: 2
1000126-000000.03: RNCC: 5 | RNVC: 9
1000126-000000.03: RNCC: 5 | RNVC: 9

24 Jan 1983

5340-12-328-9573
Dust And Moisture Seal Protective Plug

123289573
700M8: RNCC: 3 | RNVC: 2
GPN700M8: RNCC: 5 | RNVC: 2
GPN700,M8: RNCC: 5 | RNVC: 9
GPN700M8(GELB): RNCC: 5 | RNVC: 9
GPN700-AM8: RNCC: 5 | RNVC: 9

3 Jul 1992

5340-12-180-3117
Dust And Moisture Seal Protective Cap

121803117
80559: RNCC: 3 | RNVC: 2
1230115EE8928-61: RNCC: 5 | RNVC: 2
01-1785: RNCC: 5 | RNVC: 2
01230115: RNCC: 5 | RNVC: 2
N92075J1: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-194-9376
Mending Plate

121949376
66.3851.220.07-A001: RNCC: 3 | RNVC: 2
164370: RNCC: 5 | RNVC: 2
66-3851-220-07A001: RNCC: 5 | RNVC: 9

21 Dec 1982

5340-12-310-2549
Mending Plate

123102549
162651: RNCC: 3 | RNVC: 2

28 Apr 1987

5340-12-701-4545
Loop Clamp

127014545
VG95211-ML-127014545: RNCC: 2 | RNVC: 2
5.12.5314.1000.79: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-330-2254
Mounting Plate

123302254
6600153-420100.001.0: RNCC: 2 | RNVC: 2
6600153-420100.001.0: RNCC: 3 | RNVC: 2

18 Nov 1992

5340-12-318-7645
Mending Plate

123187645
704-126200-920-0: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-12-380-0183
Loop Clamp

123800183
DIN3016-1-D1-11X15-W1-2-NBR: RNCC: 2 | RNVC: 2

18 Sep 2009

5340-12-347-0268
Detent Plunger

123470268
1042179/4: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-12-352-9114
Bow Handle

123529114
GN565.1-26-164-SW: RNCC: 3 | RNVC: 2
1831835: RNCC: 5 | RNVC: 2

5 Jan 2001

5340-12-702-3603
Dust And Moisture Seal Protective Cap

127023603
VG95211-ML-127023603: RNCC: 2 | RNVC: 2
5 OST1 10471-72: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-184-7773
Mounting Plate

121847773
5801505-3.002: RNCC: 3 | RNVC: 2
5801505-3-002: RNCC: 5 | RNVC: 2

16 Aug 1980

5340-12-702-5452
Mounting Bracket

127025452
VG95211-ML-127025452: RNCC: 2 | RNVC: 2
5.51.7210.1180.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-193-7270
Nonmetallic Bumper

121937270
832.036.020.003.NR70.ST: RNCC: 3 | RNVC: 2
741092HART: RNCC: 3 | RNVC: 2
57410920043: RNCC: 5 | RNVC: 2

25 Aug 1982

5340-12-318-9281
Nonmetallic Solid Wheel

123189281
NO PRIMARY REF 12-318-9281: RNCC: 3 | RNVC: 2
313.544: RNCC: 5 | RNVC: 9
LR-1: RNCC: 5 | RNVC: 9

25 Aug 1989

5340-12-701-8047
Mounting Plate

127018047
VG95211-ML-127018047: RNCC: 2 | RNVC: 2
5.12.8605.8950.98: RNCC: 3 | RNVC: 2

6 Feb 1995

Load More Results