What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 126 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 126 of 178

5340-12-358-9548
Dust And Moisture Seal Protective Plug

123589548
915042023000: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-134-7350
Nut And Bolt Retainer

121347350
135C05703: RNCC: 3 | RNVC: 2
252866: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-197-0481
Metal Runner

121970481
62.6637.100.07-A001: RNCC: 3 | RNVC: 2
554718: RNCC: 5 | RNVC: 2

14 Sep 1983

5340-12-346-4055
Hinge Torsion Bar

123464055
3010035: RNCC: 3 | RNVC: 2
3010035: RNCC: 5 | RNVC: 2

21 Jul 1998

5340-12-316-7257
Mending Plate

123167257
41891647: RNCC: 3 | RNVC: 2

7 Feb 1989

5340-12-392-8851
Mounting Bracket

123928851
L131M0002215: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-12-368-6989
Dust And Moisture Seal Protective Cap

123686989
13.0115.8037: RNCC: 3 | RNVC: 2

7 Apr 2006

5340-12-172-1343
Sliding Stay

121721343
2655-300: RNCC: 3 | RNVC: 2

22 Dec 1977

5340-12-348-7188
Mounting Plate

123487188
800004901: RNCC: 3 | RNVC: 2
F800004901: RNCC: 5 | RNVC: 2

10 Aug 1999

5340-12-198-2711
Angle Bracket

121982711
27 0319 177: RNCC: 2 | RNVC: 2
9849672: RNCC: 3 | RNVC: 2
27 0319 177: RNCC: 5 | RNVC: 9
9849672: RNCC: 5 | RNVC: 9
270319177: RNCC: 5 | RNVC: 9

9 Jan 1984

5340-12-181-8573
Lock-Release Lever

121818573
0151602542: RNCC: 3 | RNVC: 2
06430-1516X45-RAL6014: RNCC: 3 | RNVC: 2
0151602500-RAL6014: RNCC: 5 | RNVC: 2
NLM6430-1516X45-RAL6014: RNCC: 5 | RNVC: 2
01516-25GELB0LIV: RNCC: 5 | RNVC: 2
01516.25-GELBOLIV: RNCC: 5 | RNVC: 2
NLM643-1516X45-RAL6014: RNCC: 5 | RNVC: 9
NLM643-1516X45GELB0LIV: RNCC: 5 | RNVC: 9
100343-1410-03: RNCC: 5 | RNVC: 9

21 Dec 1979

5340-12-340-5471
Mounting Plate

123405471
5901503273: RNCC: 3 | RNVC: 2
5901503273: RNCC: 5 | RNVC: 2
5901503273: RNCC: 5 | RNVC: 2
590 150 32 73: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-025-8941

5340-12-138-5446
Retaining Clip

121385446
C20136A4C487: RNCC: 3 | RNVC: 2
C20136-A4-C487: RNCC: 5 | RNVC: 2
TDRUCK4T487: RNCC: 5 | RNVC: 2
TFS72-53487: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-157-1513
Webbing Strap

121571513
5800782-081000: RNCC: 2 | RNVC: 2
5800782-081000: RNCC: 5 | RNVC: 9
000-A2-25X2,0X800-PE-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-393-4414
Block Clamp

123934414
11.28699-0247: RNCC: 3 | RNVC: 2
11.28699-0247: RNCC: 5 | RNVC: 2

17 Sep 2013

5340-12-365-0210
Track Stop

123650210
5160-311160A02B: RNCC: 2 | RNVC: 2
5160-311160A02B: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-366-6509
Mounting Bracket

123666509
772521877: RNCC: 3 | RNVC: 2
3201-852.01.01.715-000: RNCC: 5 | RNVC: 2

19 May 2005

5340-12-309-3709
Nonmetallic Bumper

123093709
A10-24.971.72.0: RNCC: 3 | RNVC: 2
A10-24-971-72-0: RNCC: 5 | RNVC: 2
A10-24-971-72-0: RNCC: 5 | RNVC: 9

20 Jan 1987

5340-12-174-8129
Dust And Moisture Seal Protective Cap

121748129
AFG012587: RNCC: 3 | RNVC: 2
AFG18-01-00-00-22: RNCC: 5 | RNVC: 2

3 Aug 1978

5340-12-354-5375
Angle Bracket

123545375
J92228230-401: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-12-193-0086
Pad Eye

121930086
774-010-09: RNCC: 3 | RNVC: 2

11 Jun 1982

5340-12-377-0775
Retaining Clip

123770775
056998-01: RNCC: 3 | RNVC: 2

10 Dec 2008

5340-12-326-3972
Nonmetallic Bumper

123263972
5802028-3300.01: RNCC: 2 | RNVC: 2
5802028-3300.01: RNCC: 3 | RNVC: 2
5802028-3300.01: RNCC: 3 | RNVC: 2
5802028-3300.01: RNCC: 3 | RNVC: 2
7802070361: RNCC: 5 | RNVC: 2
78020 70361: RNCC: 5 | RNVC: 9
5802028-3300.01: RNCC: 5 | RNVC: 9

11 Sep 1991

5340-12-354-7685
Mounting Bracket

123547685
FM-E3-3004390: RNCC: 3 | RNVC: 2

23 Aug 2001

5340-12-376-8752
Vent Plug

123768752
EE-M0065-13: RNCC: 3 | RNVC: 2

14 Nov 2008

5340-12-702-1170
Angle Bracket

127021170
VG95211-ML-127021170: RNCC: 2 | RNVC: 2
30.5314.410: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-378-3012
Lock Bar

123783012
3101-0007: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-12-189-2922
Electrical-Mechanical Equipment Post

121892922
VG95148B5,5XM3X10-ST: RNCC: 2 | RNVC: 2
VG95148B5,5XM3X10-ST: RNCC: 3 | RNVC: 2
18H274: RNCC: 3 | RNVC: 2
18H274: RNCC: 5 | RNVC: 2

16 Sep 1981

5340-12-700-6588
Pawl Fastener

127006588
VG95211-ML-127006588: RNCC: 2 | RNVC: 2
088429140: RNCC: 3 | RNVC: 2
0502540096019: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-330-8883
Rod End Clevis

123308883
1101000171: RNCC: 3 | RNVC: 2
467-371/5184-02-00-07: RNCC: 5 | RNVC: 2
5184-02-00-07: RNCC: 5 | RNVC: 2

19 Feb 1993

5340-12-702-2173
Angle Bracket

127022173
VG95211-ML-127022173: RNCC: 2 | RNVC: 2
30.7222.695: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-332-9260
Access Cover

123329260
322764: RNCC: 3 | RNVC: 2
37G15-0107-21: RNCC: 5 | RNVC: 2

6 Oct 1993

5340-12-155-4057
Rod End Clevis

121554057
160-62100-03: RNCC: 3 | RNVC: 2
160-62100-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-173-5034
Handle Grip

121735034
DIN98-E36-ST-VERZINKT: RNCC: 2 | RNVC: 2
E36DIN98STA3P: RNCC: 5 | RNVC: 2
E36DIN98STVERZINKT: RNCC: 5 | RNVC: 2
DIN98-E36-ST-A3P: RNCC: 5 | RNVC: 2
E36DIN98STB2A: RNCC: 5 | RNVC: 9

19 Apr 1978

5340-12-390-6426
Angle Bracket

123906426
313530: RNCC: 3 | RNVC: 2
2170-07-16-01/37: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-12-318-2460
Mending Plate

123182460
4074-018: RNCC: 3 | RNVC: 9

22 Jun 1989

5340-12-333-7268
Pipe Hanger

123337268
1816025180: RNCC: 3 | RNVC: 2
01816025180: RNCC: 5 | RNVC: 2
SPGU6025.180/30SK: RNCC: 5 | RNVC: 2
SPGU6025.180/30SK-W1: RNCC: 5 | RNVC: 2

28 Jan 1994

5340-12-187-7760
Hinged Hasp

121877760
100/100STVERZINKT: RNCC: 3 | RNVC: 2
100-100STGALZN: RNCC: 5 | RNVC: 2
100/100VERZINKT: RNCC: 5 | RNVC: 2

6 May 1981

5340-12-386-7545
Padlock

123867545
45/35: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-12-176-2787
Webbing Strap

121762787
23290-151047: RNCC: 2 | RNVC: 2
23290-151047: RNCC: 3 | RNVC: 2
23290-151047: RNCC: 5 | RNVC: 2
23290-151047: RNCC: 5 | RNVC: 9
HT38/3891/02: RNCC: 5 | RNVC: 9
23290-151047: RNCC: 5 | RNVC: 9
000-B2-25X2,5X140-BW-RAL6031: RNCC: 6 | RNVC: 9

23 Nov 1978

5340-12-177-2312
Electrical-Mechanical Equipment Post

121772312
5800822-032-002: RNCC: 3 | RNVC: 2
5800822-032.002: RNCC: 5 | RNVC: 2

22 Jan 1979

5340-12-337-0111
Clamping Catch

123370111
0.021.047.9: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-12-386-2399
Angle Bracket

123862399
2481-390105.001.0: RNCC: 2 | RNVC: 2
2481-390105.001.0: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-12-193-6724
Shimmy Damper

121936724
4618500011: RNCC: 3 | RNVC: 2
726 1 83 298 2: RNCC: 5 | RNVC: 9

19 Aug 1982

5340-12-177-2724
Mounting Plate

121772724
WW 419 354 B: RNCC: 2 | RNVC: 2
WW 419 354 B: RNCC: 3 | RNVC: 9
WW 419 354 A: RNCC: 5 | RNVC: 2
WW 419 354 B: RNCC: 5 | RNVC: 2
WW419354A: RNCC: 5 | RNVC: 2
WW 419 354 A: RNCC: 5 | RNVC: 9
WW419354A: RNCC: 5 | RNVC: 9

24 Jan 1979

5340-12-327-0089
Lock-Release Lever

123270089
2300232-977230.000.0: RNCC: 2 | RNVC: 2
2300232-977230.000.0: RNCC: 3 | RNVC: 2

19 Nov 1991

5340-12-393-6681
Mounting Plate

123936681
4100098-982710.008.0: RNCC: 2 | RNVC: 2
4100098-982710.008.0: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-393-7815
Key Holder

123937815
1956: RNCC: 3 | RNVC: 2
1699M6: RNCC: 5 | RNVC: 2

10 Oct 2013

5340-12-384-6538
Dust And Moisture Seal Protective Cap

123846538
1Z9020.08005: RNCC: 3 | RNVC: 2
7095989: RNCC: 5 | RNVC: 2

16 Mar 2011

5340-12-311-2337
Loop Clamp

123112337
7C27-16BA: RNCC: 3 | RNVC: 2

7 Aug 1987

5340-12-388-0165
Flush Lock

123880165
211-9301.00-33323: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-337-8201
Spacing Threaded Standoff

123378201
VG95148C5,5XM3X48,5-NRST: RNCC: 2 | RNVC: 2
4900008-53.003: RNCC: 3 | RNVC: 2

18 Apr 1995

5340-12-360-7698
Loop Clamp

123607698
DIN3016-1-D1-30X20-W1-2-CR: RNCC: 2 | RNVC: 2
BRSGU30/20N16016: RNCC: 3 | RNVC: 2
916016030202: RNCC: 5 | RNVC: 2

8 Jul 2003

5340-12-305-1147
Angle Bracket

123051147
4900059-111451.004.0: RNCC: 3 | RNVC: 2
1225044: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-340-8493
Access Cover

123408493
365-110-031: RNCC: 2 | RNVC: 2
365-110-031: RNCC: 3 | RNVC: 2

21 Jun 1996

5340-12-166-6233
Dust And Moisture Seal Protective Cap

121666233
R3850: RNCC: 3 | RNVC: 2
0127 0185: RNCC: 5 | RNVC: 2
1270185EY8751-28: RNCC: 5 | RNVC: 2
8751-28-56-06: RNCC: 5 | RNVC: 2
01270185: RNCC: 5 | RNVC: 2
1270185: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-370-4583
Angle Bracket

123704583
J0443071G-601: RNCC: 3 | RNVC: 2

9 Nov 2006

5340-12-198-7050
Bow Handle

121987050
2500138-030300.00: RNCC: 2 | RNVC: 2
2500138-030300.00: RNCC: 5 | RNVC: 9

20 Feb 1984

5340-12-353-5081
Access Cover

123535081
2500238-041400.000.0: RNCC: 2 | RNVC: 2
2500238-041400.000.0: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-12-702-5064
Rod End Clevis

127025064
VG95211-ML-127025064: RNCC: 2 | RNVC: 2
5.51.6501.0894.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-361-5514
Bow Handle

123615514
RG-1N.120.84: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-12-365-6297
Mounting Bracket

123656297
J92228479-401: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-347-3519
Lock-Release Lever

123473519
2300421-181932.000: RNCC: 2 | RNVC: 2
9908352: RNCC: 3 | RNVC: 2
2300421-181932.000: RNCC: 5 | RNVC: 2
9908352: RNCC: 5 | RNVC: 9
2300421-181932.000: RNCC: 5 | RNVC: 9

1 Dec 1998

5340-12-346-4936
Butt Hinge Leaf

123464936
274.02.01.02-16/17: RNCC: 3 | RNVC: 2
274.02.01.02-16/17: RNCC: 5 | RNVC: 9

30 Jul 1998

5340-12-154-9039
Spring Tension Clip

121549039
12743-100.012: RNCC: 2 | RNVC: 2
12743-100.012: RNCC: 3 | RNVC: 2
009-017.100-012: RNCC: 5 | RNVC: 2
009-017-100-012: RNCC: 5 | RNVC: 9
12743-100-012: RNCC: 5 | RNVC: 9
12743-100.012: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-186-7452
Mending Plate

121867452
5802206-125000-003: RNCC: 2 | RNVC: 2
535.2427: RNCC: 3 | RNVC: 2
5352427: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-341-9076
Angle Bracket

123419076
160-62229-13: RNCC: 3 | RNVC: 2
160-62229-13: RNCC: 5 | RNVC: 2
160-62229.13: RNCC: 5 | RNVC: 2
160-62229.13: RNCC: 5 | RNVC: 9

14 Nov 1996

5340-12-308-3321
Mending Plate

123083321
553-20000.007: RNCC: 3 | RNVC: 2

29 Sep 1986

5340-12-302-0948
Angle Bracket

123020948
9834420: RNCC: 3 | RNVC: 2
2300164-291080.028: RNCC: 5 | RNVC: 9
9834420: RNCC: 5 | RNVC: 9
2300164-291080-028: RNCC: 5 | RNVC: 9

1 Dec 1984

5340-12-318-8106
Dust And Moisture Seal Protective Plug

123188106
910/3790: RNCC: 3 | RNVC: 2
0745150351: RNCC: 5 | RNVC: 2
GPN910-3790: RNCC: 5 | RNVC: 2
GPN910/3790: RNCC: 5 | RNVC: 2
9103790: RNCC: 5 | RNVC: 2
6100125-0191: RNCC: 5 | RNVC: 9

18 Aug 1989

5340-12-702-1867
Mounting Bracket

127021867
VG95211-ML-127021867: RNCC: 2 | RNVC: 2
30.7207.130: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-321-9669
Mounting Bracket

123219669
279.375.741: RNCC: 3 | RNVC: 2
279.375 741: RNCC: 5 | RNVC: 2
1392152-120000.004: RNCC: 5 | RNVC: 9
279.375.741: RNCC: 5 | RNVC: 9

12 Jul 1990

5340-12-328-9275
Loop Clamp

123289275
2300354-889900-009: RNCC: 2 | RNVC: 2
70700-400206-99: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-187-7072
Retaining Strap

121877072
5563103/4: RNCC: 3 | RNVC: 2
5563103-4: RNCC: 5 | RNVC: 2

29 Apr 1981

5340-12-383-4971
Padlock

123834971
43/150HB230+USH43: RNCC: 3 | RNVC: 2
4003318316203: RNCC: 5 | RNVC: 2

28 Oct 2010

5340-12-184-3588
Mounting Plate

121843588
5801357-1800.13D: RNCC: 2 | RNVC: 2
5801357-1800.13D: RNCC: 3 | RNVC: 2
5801357-1800-13D: RNCC: 5 | RNVC: 9
5801357-1800-13D: RNCC: 5 | RNVC: 9
5801357-1800-13D: RNCC: 5 | RNVC: 9

19 Jul 1980

5340-12-168-5640
Mending Plate

121685640
C22107A137B96: RNCC: 3 | RNVC: 2
C22107-A137-B96: RNCC: 5 | RNVC: 2

23 Mar 1977

5340-12-377-3738
Mechanical Stop

123773738
315021: RNCC: 3 | RNVC: 2
5283-05-10-02/37: RNCC: 5 | RNVC: 2

13 Jan 2009

5340-12-163-9494
Dust And Moisture Seal Protective Cap

121639494
V22.228.522000-21: RNCC: 3 | RNVC: 2
V2-228-522000-21: RNCC: 5 | RNVC: 2
V2.228.522000-21: RNCC: 5 | RNVC: 2
V22-228-522000-21EZ4: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-171-1202
Flush Lock

121711202
81626806057: RNCC: 3 | RNVC: 2
81.62680-6057: RNCC: 5 | RNVC: 2
18380020407: RNCC: 5 | RNVC: 2
1203399: RNCC: 5 | RNVC: 9
81-62680-6057: RNCC: 5 | RNVC: 9

9 Sep 1977

5340-12-125-1352
Retaining Strap

121251352
8403379: RNCC: 3 | RNVC: 2
0047-042: RNCC: 5 | RNVC: 2
0047042: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-313-3513
Access Door

123133513
1068933: RNCC: 2 | RNVC: 2
1068933: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-12-382-1807
Access Cover

123821807
E-30C07277: RNCC: 2 | RNVC: 2
E-30C07277: RNCC: 3 | RNVC: 2

19 May 2010

5340-12-313-4608
Caster Frame

123134608
2300013-5532.04: RNCC: 2 | RNVC: 2
2300013-5532.04: RNCC: 3 | RNVC: 2
2300013-5532.04: RNCC: 5 | RNVC: 9

1 Apr 1988

5340-12-164-5109

5340-12-313-2529
Access Hole Frame

123132529
200332: RNCC: 3 | RNVC: 2
23K26 0008 02.H01: RNCC: 5 | RNVC: 2

16 Mar 1988

5340-12-359-1802
Mounting Bracket

123591802
9445425540: RNCC: 3 | RNVC: 2

8 Jan 2003

5340-12-359-7991
Retaining Strap

123597991
81955400020: RNCC: 3 | RNVC: 2
201041: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-339-5006
Electronic Equipment Hardware Kit

123395006
5802017-710579.00: RNCC: 2 | RNVC: 2
7801767305: RNCC: 3 | RNVC: 2
78017 67305: RNCC: 5 | RNVC: 9

28 Nov 1995

5340-12-354-8312
Vent Plug

123548312
571.09.109: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-189-0866
Dust And Moisture Seal Protective Plug

121890866
300F19: RNCC: 3 | RNVC: 2
H9: RNCC: 5 | RNVC: 2
GPN300F19: RNCC: 5 | RNVC: 2
50237600: RNCC: 5 | RNVC: 2
41800541: RNCC: 5 | RNVC: 2
300001900: RNCC: 5 | RNVC: 9
F19: RNCC: 5 | RNVC: 9
F19GPN300: RNCC: 5 | RNVC: 9
GPN300,F19: RNCC: 5 | RNVC: 9

26 Aug 1981

5340-12-381-2810
Butt Hinge Leaf

123812810
LN9172AF285: RNCC: 2 | RNVC: 2

28 Jan 2010

5340-12-171-4678
Mending Plate

121714678
5005333240: RNCC: 3 | RNVC: 2

13 Oct 1977

5340-12-171-6678
Webbing Strap

121716678
81669500005: RNCC: 3 | RNVC: 2
846.81669500005: RNCC: 5 | RNVC: 2

3 Nov 1977

5340-12-026-4864

5340-12-027-6949

5340-12-145-9595
Folding Stay

121459595
700-150B4-1D: RNCC: 3 | RNVC: 2
700-150B4-1D: RNCC: 5 | RNVC: 2
700-150B4-1D: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-375-9818
Padlock

123759818
150/40: RNCC: 3 | RNVC: 2
150: RNCC: 5 | RNVC: 2

29 Jul 2008

5340-12-122-7328
Expansion Plug

121227328
NO PRIMARY REF 12-122-7328: RNCC: 3 | RNVC: 2
0009930200: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-5026
Mending Plate

123195026
4900059-748060.004.0: RNCC: 3 | RNVC: 2
1227132: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-340-1977
Access Cover

123401977
2300232-992000.020.0: RNCC: 2 | RNVC: 2
2300232-992000.020.0: RNCC: 3 | RNVC: 2

13 Mar 1996

5340-12-358-4428
Spring Tension Clip

123584428
5559950269: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-325-0538
Mounting Plate

123250538
4139 310 212: RNCC: 3 | RNVC: 2
(241)A39630-124317: RNCC: 5 | RNVC: 2
0130326: RNCC: 5 | RNVC: 2
4139310212: RNCC: 5 | RNVC: 2
4139 310 212: RNCC: 5 | RNVC: 2

26 Apr 1991

5340-12-198-3415
Strap Fastener Loop

121983415
5801998-660009.01: RNCC: 2 | RNVC: 2
221-00-188-4: RNCC: 3 | RNVC: 2
5801998-660009.01: RNCC: 3 | RNVC: 2

18 Jan 1984

5340-12-309-1269
Nonmetallic Bumper

123091269
86012954: RNCC: 3 | RNVC: 2
86012954ED5058-04: RNCC: 5 | RNVC: 2

16 Dec 1986

5340-12-182-7360
Lock-Release Lever

121827360
25780-1200.007: RNCC: 2 | RNVC: 2
156032: RNCC: 3 | RNVC: 2
25780-1200.007: RNCC: 3 | RNVC: 2
25780-1200-007: RNCC: 5 | RNVC: 2
25780-1200-007: RNCC: 5 | RNVC: 9

22 Feb 1980

5340-12-178-5890
Double Angle Bracket

121785890
T01.01-09: RNCC: 3 | RNVC: 2
T01-01-09: RNCC: 5 | RNVC: 9
T01.01-09: RNCC: 5 | RNVC: 9

3 May 1979

5340-12-194-5238
Mending Plate

121945238
20-5160-035: RNCC: 3 | RNVC: 2

12 Nov 1982

5340-12-701-8454
Loop Clamp

127018454
VG95211-ML-127018454: RNCC: 2 | RNVC: 2
5149A-70: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-300-0012
Mending Plate

123000012
C249-A34-B18: RNCC: 2 | RNVC: 2
C249-A34-B18: RNCC: 3 | RNVC: 2

21 Jun 1984

5340-12-190-6837
Electrical-Mechanical Equipment Post

121906837
NO PRIMARY REF 12-190-6837: RNCC: 3 | RNVC: 2
7801 137065: RNCC: 5 | RNVC: 9
7801137065: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-340-1630
Mounting Plate

123401630
6700017-648000.02: RNCC: 2 | RNVC: 2
6700017-648000.02: RNCC: 3 | RNVC: 2

8 Mar 1996

5340-12-312-9272
Nonmetallic Bumper

123129272
VG95092B11X4X22X4X10NR60: RNCC: 2 | RNVC: 2
GR.II-NR.3305: RNCC: 3 | RNVC: 2
82200-B11X4X22X4X10.NR60: RNCC: 3 | RNVC: 2
IDV55-11: RNCC: 5 | RNVC: 2
B11X4X22X4.60NR: RNCC: 5 | RNVC: 2
3305: RNCC: 5 | RNVC: 2

19 Feb 1988

5340-12-702-6546
Mounting Plate

127026546
VG95211-ML-127026546: RNCC: 2 | RNVC: 2
N1292: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-153-5122
Casement Fastener

121535122
65D1-1R1: RNCC: 3 | RNVC: 2
65D1-1R1AA: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-2826
Angle Bracket

121962826
36106-001: RNCC: 3 | RNVC: 2
36 106-001: RNCC: 5 | RNVC: 9

22 Jun 1983

5340-12-353-4138
Turnbuckle Body

123534138
DIN1479-SPM14-ST-A3P: RNCC: 2 | RNVC: 2

21 Mar 2001

5340-12-329-4969
Handle Grip

123294969
305.21-Z1.1: RNCC: 3 | RNVC: 2
P209271509762062: RNCC: 5 | RNVC: 2

25 Aug 1992

5340-12-701-6310
Mounting Plate

127016310
VG95211-ML-127016310: RNCC: 2 | RNVC: 2
5.12.7050.0080.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-370-7269
Angle Bracket

123707269
353 7661-001: RNCC: 3 | RNVC: 2
353 7661-001: RNCC: 5 | RNVC: 2

14 Dec 2006

5340-12-358-6811
Access Cover

123586811
2481-500530.008.0: RNCC: 2 | RNVC: 2
2481-500530.008.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-353-8440
Mounting Bracket

123538440
D 25050-2: RNCC: 3 | RNVC: 2

15 May 2001

5340-12-171-3041
Flange Protector

121713041
D107405-0-9: RNCC: 3 | RNVC: 2

29 Sep 1977

5340-12-381-7887
Support Hook

123817887
1000286-368032.000.0: RNCC: 2 | RNVC: 2
1000286-368032.000.0: RNCC: 3 | RNVC: 2

31 Mar 2010

5340-12-312-1917
Support Hook

123121917
400053: RNCC: 3 | RNVC: 2
3002903: RNCC: 5 | RNVC: 2
3 002 903: RNCC: 5 | RNVC: 9
3002903: RNCC: 5 | RNVC: 9

2 Dec 1987

5340-12-332-5712
Loop Clamp

123325712
8211 09 4: RNCC: 3 | RNVC: 2
8211 094: RNCC: 5 | RNVC: 2
RP 9: RNCC: 5 | RNVC: 2

23 Aug 1993

5340-12-335-5329
Helical Compression Spring Seat

123355329
1110530125: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-12-326-5669
Catch Strike

123265669
1512-9360.02: RNCC: 3 | RNVC: 2
1512-9360.02: RNCC: 5 | RNVC: 2

8 Oct 1991

5340-12-132-3167

5340-12-181-1192
Spring Tension Clip

121811192
201185010202: RNCC: 3 | RNVC: 2
201185010202: RNCC: 5 | RNVC: 2

24 Oct 1979

5340-12-341-9119
Mounting Bracket

123419119
100054299: RNCC: 3 | RNVC: 2
10 0054 299: RNCC: 5 | RNVC: 2
461 850 01 68: RNCC: 5 | RNVC: 2
4618500168: RNCC: 5 | RNVC: 2

14 Nov 1996

5340-12-149-7934

5340-12-090-7021

5340-12-371-5052
Rigid Caster

123715052
BE-G 125G: RNCC: 3 | RNVC: 2

10 Apr 2007

5340-12-353-7567
Spacing Threaded Standoff

123537567
5.03.401: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-352-9054
Section Block Clamp

123529054
322.064.356.2: RNCC: 3 | RNVC: 2
3220643562: RNCC: 5 | RNVC: 2

4 Jan 2001

5340-12-325-6175
Friction Catch

123256175
3-862: RNCC: 3 | RNVC: 2

21 Jun 1991

5340-12-353-6533
Dust And Moisture Seal Protective Cap

123536533
HS20-0-RT001: RNCC: 3 | RNVC: 2

23 Apr 2001

5340-12-310-4035
Angle Bracket

123104035
2300227-321040.003: RNCC: 2 | RNVC: 2
2300227-321040.003: RNCC: 3 | RNVC: 2

19 May 1987

5340-12-391-4980
Extension Drawer Slide

123914980
01.103.106.0: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-363-1153
Mounting Bracket

123631153
5242-021009A00C: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-702-1854
Angle Bracket

127021854
VG95211-ML-127021854: RNCC: 2 | RNVC: 2
30.7206.240: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-158-3017
Resilient Mount

121583017
DIN95363-B25X25-NR55ST: RNCC: 2 | RNVC: 2
510022-M6X20.NR55.ST: RNCC: 5 | RNVC: 2
5M6671-110-11: RNCC: 5 | RNVC: 2
5M6671.110-11: RNCC: 5 | RNVC: 2
VG95363-B25X25-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-3962
Mounting Bracket

123153962
5802121-162000.00: RNCC: 2 | RNVC: 2
65.7789.467.00-A001: RNCC: 3 | RNVC: 2

19 Oct 1988

5340-12-190-3112
Nonmetallic Bumper

121903112
536078-0019: RNCC: 3 | RNVC: 2
536078-0019: RNCC: 5 | RNVC: 9
536078-0019.000: RNCC: 5 | RNVC: 9
536078-0019: RNCC: 5 | RNVC: 9
536078-0019.000: RNCC: 5 | RNVC: 9

19 Nov 1981

5340-12-172-0661
Nonmetallic Bumper

121720661
0408-159: RNCC: 3 | RNVC: 2
8405323: RNCC: 3 | RNVC: 2
0408-159: RNCC: 5 | RNVC: 2
0408159: RNCC: 5 | RNVC: 2

19 Dec 1977

5340-12-185-2482
Expansion Plug

121852482
1000025-542230.01: RNCC: 2 | RNVC: 2
7882852: RNCC: 3 | RNVC: 2
7882-852: RNCC: 5 | RNVC: 2
1000025-542230-01: RNCC: 5 | RNVC: 9
1000025-542230.01: RNCC: 5 | RNVC: 9

23 Sep 1980

5340-12-313-2260
Webbing Strap

123132260
7300029: RNCC: 2 | RNVC: 2
79039-2415: RNCC: 3 | RNVC: 2
TL7360-0031-16: RNCC: 5 | RNVC: 9

11 Mar 1988

5340-12-339-0437
Access Cover

123390437
5801357-1732.00: RNCC: 2 | RNVC: 2
5801357-1732.00: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-312-5827
Access Cover

123125827
2300194-181710.001: RNCC: 2 | RNVC: 2
2300194-181710.001: RNCC: 5 | RNVC: 2
9843633: RNCC: 5 | RNVC: 9
2300194-181710.001: RNCC: 5 | RNVC: 9
2300194-181710.001: RNCC: 5 | RNVC: 9

19 Jan 1988

5340-12-349-6468
Mounting Plate

123496468
U60.223000.01-00: RNCC: 3 | RNVC: 2

14 Dec 1999

5340-12-367-7122
Loop Clamp

123677122
18211341478: RNCC: 3 | RNVC: 2
1341478: RNCC: 5 | RNVC: 2

28 Sep 2005

5340-12-356-7253
Multiple Angle Bracket

123567253
7766026: RNCC: 2 | RNVC: 2
7766026: RNCC: 3 | RNVC: 2
99707766026: RNCC: 5 | RNVC: 9

27 Mar 2002

5340-12-199-6539
Dust And Moisture Seal Protective Plug

121996539
158708: RNCC: 2 | RNVC: 2
158708: RNCC: 3 | RNVC: 2

18 May 1984

5340-12-337-8915
Mounting Bracket

123378915
9890428: RNCC: 3 | RNVC: 9
465-068381.000: RNCC: 5 | RNVC: 9

28 Apr 1995

5340-12-334-0747
Runner

123340747
ME24091-125200076: RNCC: 2 | RNVC: 2
ME24091-125200076: RNCC: 5 | RNVC: 9

17 Mar 1994

5340-12-306-1605
Butt Hinge

123061605
957-115000-01-0: RNCC: 3 | RNVC: 2
957-115000-01-0: RNCC: 5 | RNVC: 9

31 Jan 1986

5340-12-317-8023
Mounting Bracket

123178023
P-616815-442: RNCC: 3 | RNVC: 2
P616815-442: RNCC: 5 | RNVC: 2

16 May 1989

5340-12-703-2072
Mounting Bracket

127032072
VG95211-ML-127032072: RNCC: 2 | RNVC: 2
5.12.5850.8270.00: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-197-7686
Angle Bracket

121977686
A-145401-009: RNCC: 3 | RNVC: 2
A145401-009: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-316-4800
Webbing Strap

123164800
39-1997-000000.00.0: RNCC: 2 | RNVC: 2
39-1997-000000.00.0: RNCC: 3 | RNVC: 2
000-E2-50X2,8X980-BW-RAL6031: RNCC: 6 | RNVC: 9

19 Jan 1989

5340-12-369-9370
Headless Straight Rod

123699370
201-0111-369: RNCC: 3 | RNVC: 2

29 Aug 2006

5340-12-311-0523
Angle Bracket

123110523
5801352-4300.21: RNCC: 2 | RNVC: 2
5801352-4300.21: RNCC: 3 | RNVC: 2
5801352-4300.21: RNCC: 5 | RNVC: 9

22 Jul 1987

5340-12-356-6980
Access Cover

123566980
024012806: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-164-0523
Loop Clamp

121640523
DIN3015-LF-2G-15-PP-W1: RNCC: 2 | RNVC: 2
HRGL2C1TM15PP ST BL: RNCC: 3 | RNVC: 2
RAPG9-215: RNCC: 3 | RNVC: 2
SM215PPH-LI: RNCC: 3 | RNVC: 2
RAPE9-215-GLATT: RNCC: 5 | RNVC: 2
HR2LB3-15.0/1GLATT-SM6: RNCC: 5 | RNVC: 2
H-SM215PP-LI: RNCC: 5 | RNVC: 2
RAPE9-215-GLATT: RNCC: 5 | RNVC: 2
RAPG9-215: RNCC: 5 | RNVC: 2
SM215PPH-LI: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-312-5432
Access Cover

123125432
2300194-181731.001: RNCC: 2 | RNVC: 2
2300194-181731.001: RNCC: 3 | RNVC: 2
2300194-181731.001: RNCC: 5 | RNVC: 9
2300194-181731.001: RNCC: 5 | RNVC: 9
9843644: RNCC: 5 | RNVC: 9

15 Jan 1988

5340-12-342-8796
Access Cover

123428796
517.086: RNCC: 3 | RNVC: 2
517.086: RNCC: 5 | RNVC: 9

11 Apr 1997

5340-12-343-1989
Access Cover

123431989
1-41-85271-250: RNCC: 3 | RNVC: 2
0-41-03673.4 POS17: RNCC: 5 | RNVC: 2

16 May 1997

5340-12-185-3267
Angle Bracket

121853267
2660-622: RNCC: 3 | RNVC: 2
2660622: RNCC: 5 | RNVC: 2

30 Sep 1980

5340-12-194-2106
Flush Lock

121942106
4340536: RNCC: 3 | RNVC: 2
434.0536: RNCC: 5 | RNVC: 2

12 Oct 1982

5340-12-191-2424
Metal Runner

121912424
0993964: RNCC: 3 | RNVC: 2
75D10.11.30-2: RNCC: 5 | RNVC: 2

19 Jan 1982

5340-12-196-3040
Double Angle Bracket

121963040
03582600: RNCC: 3 | RNVC: 2

27 Jun 1983

5340-12-375-4195
Angle Bracket

123754195
1520599: RNCC: 3 | RNVC: 2

30 May 2008

5340-12-363-7586
Angle Bracket

123637586
ATF5012010: RNCC: 3 | RNVC: 2

22 Jul 2004

5340-12-312-2398
Retaining Strap

123122398
100000061: RNCC: 2 | RNVC: 2
331283: RNCC: 3 | RNVC: 2
100000061: RNCC: 5 | RNVC: 2
332046: RNCC: 5 | RNVC: 2

8 Dec 1987

5340-12-311-4100
Turnbuckle

123114100
54177: RNCC: 3 | RNVC: 2
M21056: RNCC: 5 | RNVC: 2

28 Aug 1987

5340-12-383-8528
Bumper

123838528
921523: RNCC: 3 | RNVC: 2

14 Dec 2010

5340-12-185-0792
Clamp Bolt Assembly

121850792
5480857: RNCC: 3 | RNVC: 2

9 Sep 1980

5340-12-184-0343
Metal Runner

121840343
CF329917: RNCC: 3 | RNVC: 2
CF 329 917: RNCC: 5 | RNVC: 2
CF329917: RNCC: 5 | RNVC: 2
CF 329 917: RNCC: 5 | RNVC: 2
CF329917: RNCC: 5 | RNVC: 2
CF 329 917: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-12-339-3069
Nonmetallic Bumper

123393069
3964657: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-12-197-5162
Support Hook

121975162
3224G-ALBEL: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-12-372-9175
Mounting Plate

123729175
L256M3853101: RNCC: 3 | RNVC: 2

6 Sep 2007

5340-12-180-0503
Helical Compression Spring Seat

121800503
0287 0944: RNCC: 3 | RNVC: 2
2870944: RNCC: 5 | RNVC: 2
2870944EE0693-60: RNCC: 5 | RNVC: 2

17 Aug 1979

5340-12-146-6508
Retaining Strap

121466508
AWENTW2265A30: RNCC: 3 | RNVC: 2
AWENTW2265A30: RNCC: 5 | RNVC: 2
AWENTW2265A30: RNCC: 5 | RNVC: 2
AWENTW2265A30: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-348-7074
Mounting Bracket

123487074
2300387-660210.000: RNCC: 2 | RNVC: 2
9907405: RNCC: 3 | RNVC: 2
2300387-660210.000: RNCC: 5 | RNVC: 9
9907405: RNCC: 5 | RNVC: 9

10 Aug 1999

5340-12-351-2508
Spring Tension Clip

123512508
5600023-970460.000.0: RNCC: 2 | RNVC: 2
5600023-970460.000.0: RNCC: 3 | RNVC: 2
1272595: RNCC: 5 | RNVC: 2

5 Jul 2000

5340-12-312-3756
Angle Bracket

123123756
81517100512: RNCC: 3 | RNVC: 2
81.51710.0512: RNCC: 5 | RNVC: 2

22 Dec 1987

5340-12-174-5778
Access Cover

121745778
57944: RNCC: 3 | RNVC: 2

13 Jul 1978

5340-12-372-6018
Spring Tension Clip

123726018
2167 4101-440: RNCC: 3 | RNVC: 2
2167 4101-440: RNCC: 5 | RNVC: 2

2 Aug 2007

5340-12-375-7947
Rod End Clevis

123757947
03-126036/0: RNCC: 3 | RNVC: 2
03-126036/0: RNCC: 5 | RNVC: 9

4 Jul 2008

5340-12-189-1845
Angle Bracket

121891845
8331596640: RNCC: 2 | RNVC: 2
8331596640: RNCC: 3 | RNVC: 2

9 Sep 1981

5340-12-168-1613
Retaining Strap

121681613
WW410669A: RNCC: 3 | RNVC: 2
WW410669A: RNCC: 5 | RNVC: 2
WW 410 669 A: RNCC: 5 | RNVC: 2
WW410669A: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-347-4328
Pad Eye

123474328
0001-200000-903-0: RNCC: 3 | RNVC: 2
0001-200000-903-0: RNCC: 5 | RNVC: 9

10 Dec 1998

5340-12-300-9404
Retaining Strap

123009404
1423-351.10(4): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-702-0903
Mounting Plate

127020903
VG95211-ML-127020903: RNCC: 2 | RNVC: 2
30.5311.110: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-363-2323
Mounting Bracket

123632323
GSTR99-00-430000.02: RNCC: 3 | RNVC: 2

14 May 2004

5340-12-162-4729
Clamping Catch

121624729
DIN3132-D90-K18X46BK: RNCC: 2 | RNVC: 2
A90DIN3132R0H: RNCC: 5 | RNVC: 2
DIN3132-D90-K18X48-BK: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-177-3924
Dust And Moisture Seal Protective Cap

121773924
M7NR.607SCHWARZ: RNCC: 3 | RNVC: 2
1000/1070: RNCC: 3 | RNVC: 2
M7NR607SCHWARZ: RNCC: 5 | RNVC: 2
100107000: RNCC: 5 | RNVC: 2
GNP1000-1070 SCHWARZ: RNCC: 5 | RNVC: 2
GPN1000/1070: RNCC: 5 | RNVC: 2
LRG22M7NR607: RNCC: 5 | RNVC: 2
932890: RNCC: 5 | RNVC: 2
GPN1000-1070: RNCC: 5 | RNVC: 2
LRG22M7NR607: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-366-5621
Angle Bracket

123665621
2 0072-812: RNCC: 3 | RNVC: 2
2 0072-812: RNCC: 5 | RNVC: 2

10 May 2005

5340-12-332-4321
Mending Plate

123324321
0851 7564.105: RNCC: 3 | RNVC: 2
8517564FA T.105: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-12-379-8902
Mending Plate

123798902
120D152300.006.0: RNCC: 3 | RNVC: 2

10 Sep 2009

5340-12-158-8385
Flush Lock

121588385
5801081-72-017: RNCC: 3 | RNVC: 2
5801081-72.017: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-169-7514
Dust And Moisture Seal Protective Plug

121697514
81960020107: RNCC: 3 | RNVC: 2
81.96002-0107: RNCC: 5 | RNVC: 2
00779: RNCC: 5 | RNVC: 2
5007: RNCC: 5 | RNVC: 2

6 Jun 1977

5340-12-361-8773
Spacing Threaded Standoff

123618773
704253408: RNCC: 3 | RNVC: 2
1000-U324: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-12-179-5876
Nonmetallic Bumper

121795876
5800820-132-006: RNCC: 3 | RNVC: 2
5800820-132.006: RNCC: 5 | RNVC: 2

11 Jul 1979

5340-12-338-5352
Lock-Release Lever

123385352
704270277: RNCC: 3 | RNVC: 2
1300-520.00.00.020-000: RNCC: 5 | RNVC: 2

24 Jul 1995

5340-12-363-4479
Mounting Bracket

123634479
9997010-014152.03: RNCC: 3 | RNVC: 2

17 Jun 2004

5340-12-192-3629
Nonmetallic Bumper

121923629
921-1162-000: RNCC: 3 | RNVC: 2

19 Apr 1982

5340-12-314-2059
Mending Plate

123142059
272.1767.24031-08: RNCC: 2 | RNVC: 2
272.1767.24031-08: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-12-171-1307
Snap Hook

121711307
310-30: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-12-198-7421
Detent Plunger

121987421
100345-0105: RNCC: 2 | RNVC: 2
100345-0105: RNCC: 3 | RNVC: 2

22 Feb 1984

5340-12-386-5813
Mounting Plate

123865813
S81517-00: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-335-0490
Extension Drawer Slide

123350490
4900399-460610.01: RNCC: 2 | RNVC: 2
4900399-460610.01: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-12-321-9748
Retaining Strap

123219748
NA12: RNCC: 3 | RNVC: 2
NYLF1X-A12: RNCC: 5 | RNVC: 2
Q531419718: RNCC: 5 | RNVC: 2

13 Jul 1990

5340-12-702-2165
Mounting Bracket

127022165
VG95211-ML-127022165: RNCC: 2 | RNVC: 2
30.7222.595: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-172-0637
Butt Hinge Leaf

121720637
1000078-700300.01: RNCC: 2 | RNVC: 2
1000078-700300-01: RNCC: 5 | RNVC: 2
1000078-700300-01: RNCC: 5 | RNVC: 9
1000078-700300-01: RNCC: 5 | RNVC: 9

19 Dec 1977

5340-12-365-5904
Angle Bracket

123655904
J32420062-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-384-5423
Block Clamp

123845423
H1.1643-27-01-20.00-00: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-12-330-1234
Spring Tension Clip

123301234
C22136-A1200-C5: RNCC: 3 | RNVC: 2
C22136A1200C5: RNCC: 5 | RNVC: 2

5 Nov 1992

5340-12-349-7702
Manual Control Handle

123497702
RD-00-120000.03: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-12-177-5684
Mounting Bracket

121775684
2300002-151513.000: RNCC: 2 | RNVC: 2
2300002-151513.000: RNCC: 3 | RNVC: 2
2300002-151513: RNCC: 5 | RNVC: 9
2300002-151513: RNCC: 5 | RNVC: 9

7 Feb 1979

5340-12-344-8628
Mounting Bracket

123448628
5803514-203110.00: RNCC: 2 | RNVC: 2
55.0205.349.00: RNCC: 3 | RNVC: 2
5803514-203110.00: RNCC: 5 | RNVC: 9

22 Dec 1997

5340-12-361-3354
Angle Bracket

123613354
51974800759: RNCC: 3 | RNVC: 2
51.97480-0759: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-191-2818
Nonmetallic Bumper

121912818
SK-EK-0252.040.17: RNCC: 3 | RNVC: 2
SKEK0252-040-17: RNCC: 5 | RNVC: 9

21 Jan 1982

5340-12-340-7538
Resilient Mount

123407538
H30-127-37-44-10-FM: RNCC: 3 | RNVC: 2
H30-127-37-44-10 FM: RNCC: 5 | RNVC: 2

5 Jun 1996

5340-12-190-0441
Retaining Strap

121900441
F1143386-0040: RNCC: 3 | RNVC: 2
F11.43386-0040: RNCC: 5 | RNVC: 2
F11.43386-0040: RNCC: 5 | RNVC: 2

4 Nov 1981

5340-12-161-6844
Butt Hinge

121616844
100332-13240.08: RNCC: 2 | RNVC: 2
100332-13240-08: RNCC: 5 | RNVC: 2
100332-13240.08: RNCC: 5 | RNVC: 2
100332-13240-08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-332-6609
Angle Bracket

123326609
81974870533: RNCC: 2 | RNVC: 2
81974870533: RNCC: 3 | RNVC: 2
81.97487-0533: RNCC: 5 | RNVC: 2

2 Sep 1993

5340-12-351-0668
Nonmetallic Bumper

123510668
2500113-2460.07: RNCC: 2 | RNVC: 2
2500113-2460.07: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-12-120-8059
Retaining Strap

121208059
DIN72571-2X8-ST-ZN: RNCC: 2 | RNVC: 2
DIN72571-2X8-ST-ZN: RNCC: 3 | RNVC: 2
DIN72571-2X8-ST-GESCHWAERZT: RNCC: 5 | RNVC: 9
2X8DIN72571STGESCHWAERZT: RNCC: 5 | RNVC: 9
2X8DIN72571STSWGEBR: RNCC: 5 | RNVC: 9
DIN72571-2X8-ST-GESCHWAERZT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-353-7076
Retaining Strap

123537076
47367006850: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-381-7132
Door Holder

123817132
S221M7025103: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-12-300-8192
Angle Bracket

123008192
1423-200.57(4): RNCC: 3 | RNVC: 2

1 Sep 1984

5340-12-339-1623
Retaining Band

123391623
50001448-2: RNCC: 3 | RNVC: 2
150001448-2: RNCC: 5 | RNVC: 9
50001448-2: RNCC: 5 | RNVC: 9

19 Oct 1995

5340-12-340-5489
Retaining Band

123405489
4241 3376: RNCC: 2 | RNVC: 2
182309802: RNCC: 3 | RNVC: 2
4241 3376: RNCC: 3 | RNVC: 2
182103901: RNCC: 3 | RNVC: 2
42413375KZ54-2700: RNCC: 5 | RNVC: 2
42413376: RNCC: 5 | RNVC: 2
42413376UD54-2700: RNCC: 5 | RNVC: 2
D182103901: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-325-7565
Webbing Strap

123257565
79017/026-0500-0100: RNCC: 3 | RNVC: 2
79017/026-0500-0100: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-337-4414
Spring Tension Clip

123374414
13 113: RNCC: 3 | RNVC: 2
0009902892: RNCC: 5 | RNVC: 2
02-2814: RNCC: 5 | RNVC: 2

6 Mar 1995

5340-12-303-1210
Resilient Mount

123031210
31403-2GRUEN: RNCC: 3 | RNVC: 2

26 Feb 1985

5340-12-701-4832
Loop Clamp

127014832
VG95211-ML-127014832: RNCC: 2 | RNVC: 2
5.12.5811.8080.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-192-2876
Pad Eye

121922876
681-21000.21: RNCC: 3 | RNVC: 2
681-21000.21: RNCC: 5 | RNVC: 9

7 Apr 1982

5340-12-354-8351
Mounting Bracket

123548351
5400049-116821.01: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-171-8103
Loop Clamp

121718103
81.97401-0682: RNCC: 3 | RNVC: 2
5004: RNCC: 5 | RNVC: 2
81.97401-0682: RNCC: 5 | RNVC: 2
81974010682: RNCC: 5 | RNVC: 2
41822367: RNCC: 5 | RNVC: 2
41822367EY8732-23: RNCC: 5 | RNVC: 2

18 Nov 1977

5340-12-144-6392
Webbing Strap

121446392
81968024009: RNCC: 3 | RNVC: 2
000-F2-20X2,0X380-PE-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-341-5319
Rod End Clevis

123415319
NO PRIMARY REF 12-341-5319: RNCC: 3 | RNVC: 2
DIN71751-A20X40-A3P: RNCC: 5 | RNVC: 9
DIN71751-A20X40-A3P: RNCC: 5 | RNVC: 9

17 Sep 1996

5340-12-311-0519
Butt Hinge Leaf

123110519
5801357-1731.01: RNCC: 2 | RNVC: 2
5801357-1731.01: RNCC: 3 | RNVC: 2
100000329: RNCC: 5 | RNVC: 9
5801357-1731.01: RNCC: 5 | RNVC: 9

22 Jul 1987

5340-12-354-8769
Track Stop

123548769
5400049-118320.00: RNCC: 3 | RNVC: 2

31 Aug 2001

5340-12-385-2922
Mounting Bracket

123852922
F1.1189-40-40-10.00-20: RNCC: 3 | RNVC: 2

18 May 2011

5340-12-361-7377
Angle Bracket

123617377
81974870576: RNCC: 3 | RNVC: 2
819.7487-0576: RNCC: 5 | RNVC: 9

10 Nov 2003

5340-12-350-4178
Butt Hinge Leaf

123504178
J52424080-001: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-12-151-6990
Loop Clamp

121516990
160-71015-20: RNCC: 3 | RNVC: 2
160-71015-20: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-180-4958
Mounting Plate

121804958
5900063-210000.03: RNCC: 2 | RNVC: 2
5900063-210000.03: RNCC: 3 | RNVC: 2
5900063-210000-03: RNCC: 5 | RNVC: 2
5900063-210000.03: RNCC: 5 | RNVC: 9

14 Sep 1979

5340-12-356-6332
Mounting Bracket

123566332
J28730012-401: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-326-7787
Nonmetallic Bumper

123267787
PLATTE 200X79X1 MM.NR70: RNCC: 3 | RNVC: 2
NR70-200X79X1MM: RNCC: 3 | RNVC: 2

24 Oct 1991

5340-12-344-8731
Eye Hook

123448731
70.1110.686-07EZ: RNCC: 3 | RNVC: 2

5 Jan 1998

5340-12-354-8262
Mending Plate

123548262
P-876146-017: RNCC: 3 | RNVC: 2
P876146-017: RNCC: 5 | RNVC: 2

29 Aug 2001

5340-12-337-1405
Resilient Mount

123371405
P-896429-063: RNCC: 3 | RNVC: 2
P896429-063: RNCC: 5 | RNVC: 2
100000-108X40-13,0MM.NR65.ST: RNCC: 5 | RNVC: 2

24 Jan 1995

5340-12-313-0167
Double Angle Bracket

123130167
P-086147-006: RNCC: 3 | RNVC: 2
P086147-006: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-368-3735
Angle Bracket

123683735
2300487-151210.101: RNCC: 2 | RNVC: 2
2300487-151210.101: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-12-339-8596
Angle Bracket

123398596
5800748-11241: RNCC: 3 | RNVC: 2

25 Jan 1996

5340-12-328-4026
Access Cover

123284026
2653-180030.00: RNCC: 2 | RNVC: 2
2653-180030.00: RNCC: 3 | RNVC: 2

15 May 1992

5340-12-312-6990
Mounting Bracket

123126990
4200077-100-01: RNCC: 2 | RNVC: 2

28 Jan 1988

5340-12-348-8582
Loop Clamp

123488582
DIN3016-1-D1-35X20-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-35X20-W5: RNCC: 5 | RNVC: 9

27 Aug 1999

5340-12-380-5345
Turnbuckle

123805345
29E2440004: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-12-338-5289
Mending Plate

123385289
MM 2000 T 002-4: RNCC: 2 | RNVC: 2
MM 2000 T 002: RNCC: 2 | RNVC: 9
01785: RNCC: 3 | RNVC: 2
MM 2000 T 002: RNCC: 5 | RNVC: 2
01785: RNCC: 5 | RNVC: 9
MM 2000 T 002-4: RNCC: 5 | RNVC: 9
MM 2000 T 002: RNCC: 5 | RNVC: 9

24 Jul 1995

5340-12-177-4128
Angle Bracket

121774128
2300002-181057.001: RNCC: 2 | RNVC: 2
2300002-181057.001: RNCC: 3 | RNVC: 2
2300002-181057-001: RNCC: 5 | RNVC: 9
2300002-181057.001: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-702-2245
Mounting Bracket

127022245
VG95211-ML-127022245: RNCC: 2 | RNVC: 2
30.7602.30.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-362-8575
Nonmetallic Bumper

123628575
70544-002: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-12-393-5783
Dust And Moisture Seal Protective Cap-Plug

123935783
160-72085-07: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-393-9283
Mounting Plate

123939283
F1.1289-00-00-10.00-03: RNCC: 3 | RNVC: 2

23 Oct 2013

5340-12-702-1895
Mounting Bracket

127021895
VG95211-ML-127021895: RNCC: 2 | RNVC: 2
30.7209.100.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-194-5040
Webbing Strap

121945040
5800686-11491: RNCC: 2 | RNVC: 2
5800686-11491: RNCC: 3 | RNVC: 2
5800686-11491: RNCC: 3 | RNVC: 2
983 227-257: RNCC: 3 | RNVC: 2
5800686-11491: RNCC: 3 | RNVC: 9
5800686-11491: RNCC: 5 | RNVC: 9

10 Nov 1982

5340-12-300-9176
Loop Clamp

123009176
1501-320.07(4): RNCC: 3 | RNVC: 2

12 Sep 1984

5340-12-310-2118
Nonmetallic Bumper

123102118
1068890: RNCC: 2 | RNVC: 2
1068890: RNCC: 3 | RNVC: 2

21 Apr 1987

5340-12-384-2962
Mounting Plate

123842962
9233283003: RNCC: 3 | RNVC: 2
9233283003: RNCC: 5 | RNVC: 2
23951: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-12-179-9778
Rod End Connector

121799778
1211552023: RNCC: 3 | RNVC: 2

14 Aug 1979

5340-12-347-5788
Manual Control Handle

123475788
06650-17008: RNCC: 3 | RNVC: 2

11 Jan 1999

5340-12-375-4699
Dust And Moisture Seal Protective Cap

123754699
0750112185: RNCC: 3 | RNVC: 2

5 Jun 2008

5340-12-331-3637
Casement Fastener

123313637
281801353E: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-12-191-9109
Electrical-Mechanical Equipment Post

121919109
4668532: RNCC: 3 | RNVC: 2
466.8532: RNCC: 5 | RNVC: 2

16 Mar 1982

5340-12-314-1774
Loop Clamp

123141774
DIN3016-1-A1-31X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-31X20-W1-2: RNCC: 3 | RNVC: 2
RS1.31/20: RNCC: 3 | RNVC: 2
04110020031: RNCC: 5 | RNVC: 2
4110020031: RNCC: 5 | RNVC: 2
DIN3016-A1-31X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-A31X20-W1: RNCC: 5 | RNVC: 9

15 Jun 1988

5340-12-390-5376
Mounting Bracket

123905376
SK1171-977165.001.0: RNCC: 3 | RNVC: 2
7116645: RNCC: 5 | RNVC: 2

21 Nov 2012

5340-12-388-9614
Angle Bracket

123889614
1512305: RNCC: 3 | RNVC: 2
571-030100.01.0: RNCC: 5 | RNVC: 2

10 May 2012

5340-12-346-6375
Nonmetallic Bumper

123466375
5-612-2418: RNCC: 3 | RNVC: 2

19 Aug 1998

5340-12-312-6114
Shimmy Damper

123126114
23-350-1/430-450-800 G-A: RNCC: 3 | RNVC: 2
272.330 364: RNCC: 5 | RNVC: 2

21 Jan 1988

5340-12-158-1004
Resilient Mount

121581004
DIN95363-B10X10-CR55ST: RNCC: 2 | RNVC: 2
510006-M4X10.CR55.ST: RNCC: 5 | RNVC: 2
16881/V-CR55ST: RNCC: 5 | RNVC: 2
332184: RNCC: 5 | RNVC: 2
6511-03045: RNCC: 5 | RNVC: 2
352250025541: RNCC: 5 | RNVC: 2
VG95363-B10X10-CR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-145-3658
Catch Strike

121453658
51L7-1AA: RNCC: 3 | RNVC: 2
5801434-206000-03: RNCC: 5 | RNVC: 2
5801434-206000.03: RNCC: 5 | RNVC: 2
BAZ2428: RNCC: 5 | RNVC: 2
TH20A940: RNCC: 5 | RNVC: 2
99055479: RNCC: 5 | RNVC: 2
00-981-6705: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-339-9575
Mounting Plate

123399575
84152/0100-02: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-12-192-1346
Expansion Shield

121921346
PA3M4/9: RNCC: 3 | RNVC: 2
PA3M4X9: RNCC: 5 | RNVC: 2
FV 2027695: RNCC: 5 | RNVC: 2
2574822: RNCC: 5 | RNVC: 2

24 Mar 1982

5340-12-702-1874
Mounting Plate

127021874
VG95211-ML-127021874: RNCC: 2 | RNVC: 2
30.7207.212: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-324-9136
Angle Bracket

123249136
14.08.1005-4: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-12-374-7872
Mounting Plate

123747872
10118-183200.000.0: RNCC: 2 | RNVC: 2
10118-183200.000.0: RNCC: 3 | RNVC: 2

20 Mar 2008

5340-12-179-3584
Loop Clamp

121793584
4047930047: RNCC: 3 | RNVC: 2

25 Jun 1979

5340-12-315-8768
Mending Plate

123158768
3819300264: RNCC: 3 | RNVC: 2
381 930 02 64: RNCC: 5 | RNVC: 2

3 Dec 1988

5340-12-179-2793
Mending Plate

121792793
4353020140: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-172-1251
Clamp Bolt Assembly

121721251
N00A0400240502A: RNCC: 3 | RNVC: 2
00004240502A: RNCC: 5 | RNVC: 2
00004240502A: RNCC: 5 | RNVC: 9
N00A0400240502A: RNCC: 5 | RNVC: 9

22 Dec 1977

5340-12-316-8400
Helical Compression Spring Seat

123168400
2000220030: RNCC: 3 | RNVC: 2
2 000 220 030: RNCC: 5 | RNVC: 2

16 Feb 1989

5340-12-329-2173
Dust And Moisture Seal Protective Cap

123292173
250/40: RNCC: 3 | RNVC: 2
GPN250,250/40: RNCC: 5 | RNVC: 9
GPN250-250/40: RNCC: 5 | RNVC: 9

24 Jul 1992

5340-12-187-2235
Electrical-Mechanical Equipment Post

121872235
5801338-0512-007: RNCC: 3 | RNVC: 2
5801338-0512.007: RNCC: 5 | RNVC: 2

11 Mar 1981

5340-12-303-0488
Access Cover

123030488
39691-002: RNCC: 3 | RNVC: 2
39 691-002: RNCC: 5 | RNVC: 9

22 Feb 1985

5340-12-192-1398
Electrical-Mechanical Equipment Post

121921398
4540425: RNCC: 3 | RNVC: 2
454.0425: RNCC: 5 | RNVC: 2
5801602-012200-001: RNCC: 5 | RNVC: 9

29 Mar 1982

5340-12-702-1646
Mounting Bracket

127021646
VG95211-ML-127021646: RNCC: 2 | RNVC: 2
30.7060.31: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-332-7252
Spacing Threaded Standoff

123327252
537237-0090.000: RNCC: 3 | RNVC: 2
537237-0090.000: RNCC: 5 | RNVC: 9

10 Sep 1993

5340-12-334-3571
Double Angle Bracket

123343571
105-80421.02: RNCC: 3 | RNVC: 2
105-80421-02: RNCC: 5 | RNVC: 2

29 Apr 1994

5340-12-338-0778
Resilient Mount

123380778
DIN95363-B30X30-M8X16-NBR55ST: RNCC: 2 | RNVC: 2
510027-M8X16.NBR55.ST: RNCC: 5 | RNVC: 2
2002 1000: RNCC: 5 | RNVC: 2
20021000EC0139-21: RNCC: 5 | RNVC: 2
VG95363-B30X30-M8X16-NBR55ST: RNCC: 5 | RNVC: 9

18 May 1995

5340-12-197-1236
Lock-Release Lever

121971236
G22XM10X40HWN441SCHWARZ: RNCC: 3 | RNVC: 2
06460-3101X40: RNCC: 3 | RNVC: 2
0231004001: RNCC: 3 | RNVC: 2
02310.40SCHWARZ: RNCC: 5 | RNVC: 2
02310.40RAL9005: RNCC: 5 | RNVC: 2
NLM646-3101X40: RNCC: 5 | RNVC: 9
NLM6460-3101X40: RNCC: 5 | RNVC: 9
0231004003: RNCC: 5 | RNVC: 9
646.310X40SCHWARZ: RNCC: 5 | RNVC: 9
NLM646.310X40SCHWARZ: RNCC: 5 | RNVC: 9

21 Sep 1983

5340-12-138-4454
Manual Control Handle

121384454
DIN99-N80-PHOSPHATIERT: RNCC: 2 | RNVC: 2
E13XM10DIN99PHRE: RNCC: 5 | RNVC: 2
N80DIN99PH0SPHATIERT: RNCC: 5 | RNVC: 2
N80DIN99PHOSPHATIERT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-359-6341
Mounting Bracket

123596341
5801357-1800.31: RNCC: 2 | RNVC: 2
5801357-1800.31: RNCC: 3 | RNVC: 2

24 Feb 2003

5340-12-185-0006
Mounting Bracket

121850006
F01-212300.05.0: RNCC: 3 | RNVC: 2
F01-212300-05-0: RNCC: 5 | RNVC: 2

2 Sep 1980

5340-12-304-4521
Sealing Plug Assembly

123044521
MB700-120: RNCC: 3 | RNVC: 2
MB700-120: RNCC: 5 | RNVC: 9

18 Jul 1985

5340-12-702-9385
Pawl Fastener

127029385
VG95211-ML-127029385: RNCC: 2 | RNVC: 2
N1293-3K: RNCC: 3 | RNVC: 2
0500801247569: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-339-0864
Electronic Equipment Hardware Kit

123390864
238 450-01001: RNCC: 3 | RNVC: 2

10 Oct 1995

5340-12-333-2612
Nonmetallic Bumper

123332612
26-21C1029P56: RNCC: 3 | RNVC: 2
26-21C1029G001-P56: RNCC: 5 | RNVC: 2
26-21C1029G001P56: RNCC: 5 | RNVC: 2

16 Nov 1993

5340-12-702-1676
Angle Bracket

127021676
VG95211-ML-127021676: RNCC: 2 | RNVC: 2
30.7100.2240.01: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-175-1859
Double Angle Bracket

121751859
04469999: RNCC: 3 | RNVC: 2
4469999EE5091-29: RNCC: 5 | RNVC: 2

30 Aug 1978

5340-12-337-7915
Mounting Plate

123377915
9895084: RNCC: 3 | RNVC: 9
465-151455.000: RNCC: 5 | RNVC: 9

11 Apr 1995

5340-12-181-5318
Access Cover

121815318
72-123: RNCC: 3 | RNVC: 2

29 Nov 1979

5340-12-153-8366
Spring Tension Clip

121538366
100355-453000.05: RNCC: 2 | RNVC: 2
100355-453000.05: RNCC: 3 | RNVC: 2
100355-453000-05: RNCC: 5 | RNVC: 2
655-2135-04: RNCC: 5 | RNVC: 2
100355-453000-05: RNCC: 5 | RNVC: 9
100355-453000-05: RNCC: 5 | RNVC: 9
655-2135-04: RNCC: 5 | RNVC: 9
100355-453000.05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-2566
Angle Bracket

123152566
6243120180: RNCC: 3 | RNVC: 2
624 312 01 80: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-386-1519
Double Angle Bracket

123861519
3055384: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-318-6111
Double Angle Bracket

123186111
0241 9971: RNCC: 3 | RNVC: 2
02419971: RNCC: 5 | RNVC: 2
2419971KZ0148-17: RNCC: 5 | RNVC: 2

1 Aug 1989

5340-12-361-4630
Mounting Plate

123614630
71687: RNCC: 3 | RNVC: 2
71687-670: RNCC: 5 | RNVC: 9

6 Oct 2003

5340-12-327-0819
Mounting Plate

123270819
561790-00: RNCC: 3 | RNVC: 2

28 Nov 1991

5340-12-376-5966
Dust And Moisture Seal Protective Cap-Plug

123765966
GSC-15-83724-01: RNCC: 3 | RNVC: 2

21 Oct 2008

5340-12-136-2435
Retaining Strap

121362435
E000962001: RNCC: 3 | RNVC: 2
81.97401-0383: RNCC: 5 | RNVC: 2
81974010383: RNCC: 5 | RNVC: 2
0047-162: RNCC: 5 | RNVC: 2
0047162: RNCC: 5 | RNVC: 2
8433899: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-375-8813
Resilient Mount Plate

123758813
21.7381-01-55-01.00-39: RNCC: 3 | RNVC: 2
G28243: RNCC: 5 | RNVC: 2

16 Jul 2008

5340-12-316-5120
Nonmetallic Bumper

123165120
6387950: RNCC: 3 | RNVC: 2

23 Jan 1989

5340-12-122-4243
Retaining Strap

121224243
3049950120: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-328-6737
Filler Opening Cap

123286737
701201551: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-357-6216
Retaining Strap

123576216
ZBM300: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-387-4665
Mechanic Equipment Hardware Kit

123874665
5802017-722000.00: RNCC: 2 | RNVC: 2
5802017-722000.00: RNCC: 3 | RNVC: 2

21 Dec 2011

5340-12-323-2223
Escutcheon Plate

123232223
100017114: RNCC: 3 | RNVC: 2

2 Nov 1990

5340-12-317-3472
Dust And Moisture Seal Protective Plug

123173472
RP650767: RNCC: 3 | RNVC: 2

30 Mar 1989

5340-12-384-2809
Access Cover

123842809
9226411: RNCC: 3 | RNVC: 2

9 Feb 2011

5340-12-199-9110
Bridge Clamp

121999110
9617024154: RNCC: 3 | RNVC: 2
81523150040: RNCC: 5 | RNVC: 2
81.52315.0040: RNCC: 5 | RNVC: 2

15 Jun 1984

5340-12-311-2128
Helical Compression Spring Seat

123112128
2310-55.03: RNCC: 3 | RNVC: 2
203395: RNCC: 5 | RNVC: 2

5 Aug 1987

5340-12-320-6205
Double Angle Bracket

123206205
09 0004 305: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-12-302-7856
Webbing Strap

123027856
CF 482 207 AU: RNCC: 3 | RNVC: 2
CF 482 207 AU: RNCC: 5 | RNVC: 2

30 Jan 1985

5340-12-319-4470
Mounting Bracket

123194470
409024830: RNCC: 3 | RNVC: 2
409.024830: RNCC: 5 | RNVC: 2

3 Oct 1989

5340-12-351-5047
Angle Bracket

123515047
4616930312: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-351-5063
Retaining Strap

123515063
0008250014: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-314-2033
Mending Plate

123142033
272.317 737: RNCC: 2 | RNVC: 2
272.317.737: RNCC: 3 | RNVC: 2
272.317 737: RNCC: 5 | RNVC: 9

16 Jun 1988

5340-12-320-4587
Electrical-Mechanical Equipment Post

123204587
52.9352.102.72: RNCC: 3 | RNVC: 2

17 Jan 1990

5340-12-094-5480

5340-12-337-0294
Access Cover

123370294
1000232-05-03-00-00-008: RNCC: 2 | RNVC: 2
1000232-05-03-00-00-008: RNCC: 3 | RNVC: 2

12 Jan 1995

5340-12-335-3453
Angle Bracket

123353453
6700018-202100.01: RNCC: 2 | RNVC: 2
6700018-202100.01: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-12-314-5237
Access Cover

123145237
272.1768.21-02: RNCC: 2 | RNVC: 2
272.1768.21-02: RNCC: 3 | RNVC: 2

15 Jul 1988

5340-12-357-5516
Quick Release Plunger

123575516
2203-260: RNCC: 3 | RNVC: 2
HWN-2203-M20: RNCC: 5 | RNVC: 9

1 Jul 2002

5340-12-308-2179
Resilient Mount

123082179
2300223-060000.04.0: RNCC: 2 | RNVC: 2
2300223-060000.04.0: RNCC: 3 | RNVC: 2
3.0.1.45NR/ST-M10X12: RNCC: 5 | RNVC: 2
100001-M10X12-NR45.ST: RNCC: 5 | RNVC: 2
2300223-060000.04.0: RNCC: 5 | RNVC: 2
60010030-M10X12.NR45.ST: RNCC: 5 | RNVC: 2
786012WEICH-12,0MM ZAPFEN: RNCC: 5 | RNVC: 2

15 Sep 1986

5340-12-321-7059
Angle Bracket

123217059
702-244110-000-0: RNCC: 3 | RNVC: 2

18 Jun 1990

5340-12-359-9370
Spring Tension Clip

123599370
2500261-182400.016.0: RNCC: 2 | RNVC: 2
2500261-182400.016.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-167-9644
Nonmetallic Bumper

121679644
NO 1312-80: RNCC: 3 | RNVC: 2
551 903: RNCC: 3 | RNVC: 2
1312-80: RNCC: 5 | RNVC: 2
551903: RNCC: 5 | RNVC: 2
811.035.080.066.12X37.NR55.ST: RNCC: 5 | RNVC: 2
81135-80X66-M12X37.NR55.ST: RNCC: 5 | RNVC: 2
1041714: RNCC: 5 | RNVC: 2
909711504: RNCC: 5 | RNVC: 2
909711504: RNCC: 5 | RNVC: 2

7 Feb 1977

5340-12-343-8942
Spacing Threaded Standoff

123438942
0D846.91-10-22-00-005: RNCC: 3 | RNVC: 2

12 Aug 1997

5340-12-390-1838
Mounting Bracket

123901838
R56846-09: RNCC: 3 | RNVC: 2
R56846: RNCC: 5 | RNVC: 2

12 Oct 2012

5340-12-181-9557
Rod End Clevis

121819557
01TC30553-01: RNCC: 3 | RNVC: 2

28 Dec 1979

5340-12-162-8726
Angle Bracket

121628726
21 604-001: RNCC: 3 | RNVC: 2
21604-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-386-3336
Mechanical Stop

123863336
009-221.219-008: RNCC: 2 | RNVC: 2
009-221.219-008: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-315-0288
Corner Brace

123150288
110-310.54: RNCC: 3 | RNVC: 2
110D310.54: RNCC: 5 | RNVC: 2

8 Sep 1988

5340-12-318-9627
Spring Tension Clip

123189627
E116-157: RNCC: 3 | RNVC: 2
0004622073: RNCC: 5 | RNVC: 2

28 Aug 1989

5340-12-390-5662
Spacing Threaded Standoff

123905662
5804038-202200.05: RNCC: 2 | RNVC: 2

23 Nov 2012

5340-12-315-4825
Electrical-Mechanical Equipment Post

123154825
P895904-002: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-12-348-8730
Mending Plate

123488730
245/7383-01-00-02: RNCC: 3 | RNVC: 2

30 Aug 1999

5340-12-342-6186
Access Cover

123426186
0001-140000-901-0: RNCC: 3 | RNVC: 2
0001-140000-901-0: RNCC: 5 | RNVC: 2

7 Mar 1997

5340-12-356-5125
Access Cover

123565125
58R059-618-1: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-135-6508

5340-12-335-5995
Lock-Release Lever

123355995
3027070: RNCC: 3 | RNVC: 2
Z-6310 3412: RNCC: 5 | RNVC: 2

5 Sep 1994

5340-12-310-7666
Mending Plate

123107666
2.456706: RNCC: 3 | RNVC: 2
2-456706: RNCC: 5 | RNVC: 2
2-456706: RNCC: 5 | RNVC: 2

29 Jun 1987

5340-12-335-3469
Angle Bracket

123353469
20 1348 03 00 02: RNCC: 3 | RNVC: 2
20 1348 03 00 02: RNCC: 5 | RNVC: 2
2-32-KRG: RNCC: 5 | RNVC: 2
20032 KRG: RNCC: 5 | RNVC: 2

11 Aug 1994

5340-12-190-3130
Rod End Clevis

121903130
03345162: RNCC: 3 | RNVC: 2
33023103: RNCC: 5 | RNVC: 2
3345162EE5009-55: RNCC: 5 | RNVC: 2
E33023103: RNCC: 5 | RNVC: 2
3345162: RNCC: 5 | RNVC: 9

19 Nov 1981

5340-12-318-1079
Angle Bracket

123181079
4605420440: RNCC: 3 | RNVC: 2

13 Jun 1989

5340-12-327-5030
Nonmetallic Bumper

123275030
11257909904: RNCC: 3 | RNVC: 2

28 Jan 1992

5340-12-139-8436
Retaining Strap

121398436
177B07016: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-300-9402
Double Angle Bracket

123009402
1423-351.17(4): RNCC: 3 | RNVC: 2

13 Sep 1984

5340-12-166-5929
Helical Compression Spring Retainer

121665929
WW407941C: RNCC: 3 | RNVC: 9
WW407941C: RNCC: 5 | RNVC: 2
WW 407 941 C: RNCC: 5 | RNVC: 2
WW 407 941 C: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-381-6377
Dust And Moisture Seal Protective Plug

123816377
07.1320: RNCC: 3 | RNVC: 2
BA07.1320SE: RNCC: 5 | RNVC: 2

11 Mar 2010

5340-12-188-3879
Dust And Moisture Seal Protective Plug

121883879
600B398: RNCC: 3 | RNVC: 2
GPN600B398: RNCC: 5 | RNVC: 2
B398: RNCC: 5 | RNVC: 9
B398GPN600: RNCC: 5 | RNVC: 9
GPN600,B398: RNCC: 5 | RNVC: 9
600039800: RNCC: 5 | RNVC: 9

6 Jul 1981

5340-12-168-9933
Compression Cup

121689933
H280-1-88NBR/101: RNCC: 3 | RNVC: 2
H280-1-14PA101: RNCC: 5 | RNVC: 2
H280-1-88NBR101: RNCC: 5 | RNVC: 2
1026611-5AEITEM24: RNCC: 5 | RNVC: 2

13 Apr 1977

5340-12-358-4253
Mechanical Stop

123584253
4000A-310000.029.0: RNCC: 2 | RNVC: 2
4000A-310000.029.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-390-2971
Mounting Bracket

123902971
9999261-393000.000.0: RNCC: 3 | RNVC: 2

26 Oct 2012

5340-12-177-2521
Electrical-Mechanical Equipment Post

121772521
5801215-16115-008: RNCC: 3 | RNVC: 2
5801215-16115.008: RNCC: 5 | RNVC: 2

22 Jan 1979

5340-12-336-7148
Hand Crank

123367148
3WX3184-0JA00: RNCC: 3 | RNVC: 2
3WX3184-0JA00: RNCC: 5 | RNVC: 9

13 Dec 1994

5340-12-199-5100
Mending Plate

121995100
5800659-1020.01: RNCC: 2 | RNVC: 2
5800659-1020-01: RNCC: 5 | RNVC: 9
5800659-1020.01: RNCC: 5 | RNVC: 9

8 May 1984

5340-12-352-7003
Retaining Strap

123527003
KRS-28: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-12-701-9676
Retaining Strap

127019676
VG95211-ML-127019676: RNCC: 2 | RNVC: 2
01.7208.1270.1: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-332-0440
Multiple Angle Bracket

123320440
160-626057-01: RNCC: 3 | RNVC: 2
160-626057-01: RNCC: 5 | RNVC: 9

19 Jul 1993

5340-12-307-0725
Bow Handle

123070725
IR 520004-420.2: RNCC: 3 | RNVC: 2

5 May 1986

5340-12-147-1163
Snap Hook

121471163
DIN5299-C140ZN: RNCC: 2 | RNVC: 2
DIN5299-C140-ZN: RNCC: 3 | RNVC: 2
245-140X12 VERZINKT: RNCC: 3 | RNVC: 9
E102-65: RNCC: 5 | RNVC: 2
C140DIN5299VERZINKT: RNCC: 5 | RNVC: 2
C140DIN5299VZK: RNCC: 5 | RNVC: 2
0524 140 12: RNCC: 5 | RNVC: 2
7-10-01: RNCC: 5 | RNVC: 2
245-140X12VERZINKT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-7872
T Plate

123087872
KM.S01-111200.002: RNCC: 3 | RNVC: 2

18 Nov 1986

5340-12-166-9332
Bow Handle

121669332
VG95149B91-M4GDZN-CR: RNCC: 2 | RNVC: 2
102.17.204: RNCC: 3 | RNVC: 2
102-17-204: RNCC: 5 | RNVC: 2
102-17-204: RNCC: 5 | RNVC: 2
102.17.204: RNCC: 5 | RNVC: 2

6 Nov 1976

5340-12-313-3283
Pad Eye

123133283
1900037-70-03: RNCC: 2 | RNVC: 2
352847: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-12-357-5024
Mounting Bracket

123575024
J92228127-403: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-12-378-3307
Angle Bracket

123783307
41028605: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-336-9547
Case Corner

123369547
81614460003: RNCC: 3 | RNVC: 2
81.61446.0003: RNCC: 5 | RNVC: 2

29 Dec 1994

5340-12-327-0087
Multiple Angle Bracket

123270087
7002786: RNCC: 3 | RNVC: 2

19 Nov 1991

5340-12-702-2196
Mounting Bracket

127022196
VG95211-ML-127022196: RNCC: 2 | RNVC: 2
30.7227.590: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-342-5216
Mounting Bracket

123425216
463-069107.000: RNCC: 3 | RNVC: 9
9901342: RNCC: 5 | RNVC: 9

24 Feb 1997

5340-12-371-1684
Dust And Moisture Seal Protective Cap

123711684
909128505: RNCC: 3 | RNVC: 2

22 Feb 2007

5340-12-361-4859
Loop Clamp

123614859
J28120278-003: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-371-2969
Mechanical Stop

123712969
8350-0054: RNCC: 2 | RNVC: 2
8350-0054: RNCC: 3 | RNVC: 2

12 Mar 2007

5340-12-394-2137
Bumper

123942137
65-228386: RNCC: 3 | RNVC: 2

12 Nov 2013

5340-12-143-0891
Spring Tension Clip

121430891
25704-194200.01.0: RNCC: 2 | RNVC: 2
25704-194200.01.0: RNCC: 3 | RNVC: 2
25704-194200-01-0: RNCC: 5 | RNVC: 2
25704-194200-01-0: RNCC: 5 | RNVC: 9
25704-194200.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-2017
Retaining Strap

121902017
2500075-560500.010.0: RNCC: 2 | RNVC: 2
2500075-560500.010.0: RNCC: 3 | RNVC: 2
2500075-560500-010-0: RNCC: 5 | RNVC: 9
2500075-560500.010.0: RNCC: 5 | RNVC: 9
2500075-560500-010-0: RNCC: 5 | RNVC: 9

11 Nov 1981

5340-12-175-0224
Dust And Moisture Seal Protective Cap

121750224
LP-007-5-74: RNCC: 3 | RNVC: 2
01236: RNCC: 5 | RNVC: 2
K30803-2: RNCC: 5 | RNVC: 2
LP007-5-74: RNCC: 5 | RNVC: 2
WW 418 165: RNCC: 5 | RNVC: 9

16 Aug 1978

5340-12-324-6171
Electronic Equipment Hardware Kit

123246171
C22107-A300-D8: RNCC: 3 | RNVC: 2

7 Mar 1991

5340-12-317-7585
Angle Bracket

123177585
P-296883-291: RNCC: 3 | RNVC: 2
P296883-291: RNCC: 5 | RNVC: 2

10 May 1989

5340-12-323-8485
Electrical-Mechanical Equipment Post

123238485
C22107-A300-C40: RNCC: 3 | RNVC: 2

27 Dec 1990

5340-12-181-2551
Mounting Bracket

121812551
2000-4712-00: RNCC: 3 | RNVC: 2

7 Nov 1979

5340-12-192-9258
Hinge Torsion Bar

121929258
4609885158: RNCC: 3 | RNVC: 2
8716-34: RNCC: 5 | RNVC: 2
721 1 83 440 1: RNCC: 5 | RNVC: 9

7 Jun 1982

5340-12-701-2553
Mounting Bracket

127012553
VG95211-ML-127012553: RNCC: 2 | RNVC: 2
5.12.4003.0022.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6364
Angle Bracket

127016364
VG95211-ML-127016364: RNCC: 2 | RNVC: 2
5.12.7070.1110.13: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-324-5207
Loop Clamp

123245207
DIN3015-Z-KP-3-R-25-25-PP: RNCC: 2 | RNVC: 2
HRZ3KP25-25PP: RNCC: 3 | RNVC: 2
RBPR-325/25: RNCC: 3 | RNVC: 2
325/25PP: RNCC: 3 | RNVC: 2
7401346: RNCC: 5 | RNVC: 2
RBP-325: RNCC: 5 | RNVC: 2
RBPR-325/25: RNCC: 5 | RNVC: 2
DIN3015-ZKP3R-25-25PP: RNCC: 5 | RNVC: 2

26 Feb 1991

5340-12-301-5790
Rod End Clevis

123015790
4160447: RNCC: 3 | RNVC: 2
2.38-511: RNCC: 5 | RNVC: 2
238-511: RNCC: 5 | RNVC: 2

25 Oct 1984

5340-12-189-9460
Handwheel

121899460
NO PRIMARY REF 12-189-9460: RNCC: 3 | RNVC: 2
A125DIN951-GG: RNCC: 5 | RNVC: 9
A125X11DIN951-GG: RNCC: 5 | RNVC: 9
DIN951-A125-GG: RNCC: 5 | RNVC: 9

28 Oct 1981

5340-12-314-6707
Double Angle Bracket

123146707
512214-3751.000: RNCC: 3 | RNVC: 2
512214-3751: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-313-8641
Access Cover

123138641
81.30123.0016: RNCC: 3 | RNVC: 2
81-30123-0016: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-310-3686
Angle Bracket

123103686
5801758-0700.03: RNCC: 2 | RNVC: 2
5801758-0700.03: RNCC: 3 | RNVC: 2

15 May 1987

5340-12-352-4868
Swivel Caster

123524868
LH-SETH 125K-ST: RNCC: 3 | RNVC: 2
LH-SETH125K-ST: RNCC: 5 | RNVC: 2
LH-SETH125P-ST: RNCC: 5 | RNVC: 9

22 Nov 2000

5340-12-313-7984
Retaining Strap

123137984
1684046-100.08: RNCC: 3 | RNVC: 2

6 May 1988

5340-12-182-9827
Electrical-Mechanical Equipment Post

121829827
612-6107: RNCC: 3 | RNVC: 2

11 Mar 1980

5340-12-159-9922
Pad Eye

121599922
F1472-55-01-25: RNCC: 3 | RNVC: 2
1472-55-01-25: RNCC: 5 | RNVC: 2
162918401: RNCC: 5 | RNVC: 2
03393313: RNCC: 5 | RNVC: 2
1472-55-01.25: RNCC: 5 | RNVC: 2
3393313EF1472-55: RNCC: 5 | RNVC: 2
03393313: RNCC: 5 | RNVC: 9
1472-55-01-25: RNCC: 5 | RNVC: 9
1472-55-01.25: RNCC: 5 | RNVC: 9
3393313EF1472-55: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-324-9768
Permanent Magnet

123249768
D27-WEISZ: RNCC: 3 | RNVC: 2
OM30 WEISZ: RNCC: 3 | RNVC: 2
460510: RNCC: 3 | RNVC: 2
D27: RNCC: 5 | RNVC: 2
94.963: RNCC: 5 | RNVC: 2

17 Apr 1991

5340-12-332-6608
Angle Bracket

123326608
81974870531: RNCC: 2 | RNVC: 2
81974870531: RNCC: 3 | RNVC: 2
81.97487-0531: RNCC: 5 | RNVC: 2

2 Sep 1993

5340-12-372-4390
Mechanical Stop

123724390
00006640700: RNCC: 3 | RNVC: 2

17 Jul 2007

5340-12-379-3902
Loop Clamp

123793902
5099364: RNCC: 3 | RNVC: 2
5001874211: RNCC: 5 | RNVC: 2

20 Jul 2009

5340-12-385-2272
Access Door Hinge

123852272
0007230441: RNCC: 3 | RNVC: 2

11 May 2011

5340-12-338-2351
Webbing Strap

123382351
9193.942.4: RNCC: 3 | RNVC: 2
76001: RNCC: 5 | RNVC: 2
9193.942: RNCC: 5 | RNVC: 2

8 Jun 1995

5340-12-337-7040
Retaining Strap

123377040
1232700241: RNCC: 3 | RNVC: 2
601 070 12 40: RNCC: 5 | RNVC: 2
6010701240: RNCC: 5 | RNVC: 2

30 Mar 1995

5340-12-333-8836
Double Angle Bracket

123338836
404-7: RNCC: 3 | RNVC: 2

21 Feb 1994

5340-12-168-8193
Retaining Strap

121688193
3576259: RNCC: 3 | RNVC: 2

13 Apr 1977

5340-12-365-8632
Loop Clamp

123658632
105-50301: RNCC: 3 | RNVC: 2

15 Feb 2005

5340-12-371-0377
Helical Compression Spring Seat

123710377
E0015810001: RNCC: 3 | RNVC: 2

30 Jan 2007

5340-12-025-7911

5340-12-134-8767

5340-12-042-1618

5340-12-157-9848
Retaining Clip

121579848
2360-172680.02.0: RNCC: 2 | RNVC: 2
2360-172680-02-0: RNCC: 5 | RNVC: 2
2360-172680-02-0: RNCC: 5 | RNVC: 2
2360-172680.02.0: RNCC: 5 | RNVC: 2
2360-172680.02.0: RNCC: 5 | RNVC: 2
2360-172680-02-0: RNCC: 5 | RNVC: 9
2360-172680-02-0: RNCC: 5 | RNVC: 9
2360-172680.02.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-0136
Double Angle Bracket

123130136
P-086147-015: RNCC: 3 | RNVC: 2
P086147-015: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-303-8471
Rigid Caster

123038471
439A27R200LZPK: RNCC: 3 | RNVC: 2
439A28R200LZPK: RNCC: 5 | RNVC: 2
439-28-RO/200/20-N: RNCC: 5 | RNVC: 2

7 May 1985

5340-12-392-5812
Spacing Threaded Standoff

123925812
6000062-543000.003.0: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-12-198-1260
Electrical-Mechanical Equipment Post

121981260
5801411-330114: RNCC: 3 | RNVC: 2
5801411-330114: RNCC: 5 | RNVC: 9

22 Dec 1983

5340-12-356-1746
Angle Bracket

123561746
ED41-1310-00010-105: RNCC: 2 | RNVC: 2
ED41-1310-00010-105: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-701-1584
Mounting Bracket

127011584
VG95211-ML-127011584: RNCC: 2 | RNVC: 2
5.12.0231.1030.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-332-8755
Mounting Plate

123328755
160-75742-03: RNCC: 3 | RNVC: 2
160-75742-03: RNCC: 5 | RNVC: 9

29 Sep 1993

5340-12-177-2355
Platte

121772355
2300002-222100.005: RNCC: 2 | RNVC: 2
2300002-222100.005: RNCC: 3 | RNVC: 2
2300002-222100-005: RNCC: 5 | RNVC: 9
2300002-222100.005: RNCC: 5 | RNVC: 9

22 Jan 1979

5340-12-156-9659
Butt Hinge Leaf

121569659
23176-262120.01.0: RNCC: 3 | RNVC: 2
23176-262120-01-0: RNCC: 5 | RNVC: 2
23176-262120-01-0: RNCC: 5 | RNVC: 9
23176-262120.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-133-2734
Retaining Strap

121332734
NO PRIMARY REF 12-133-2734: RNCC: 3 | RNVC: 2
1025201VERBLEIT: RNCC: 5 | RNVC: 2
21-5DIN49045STVERBLEIT: RNCC: 5 | RNVC: 9
DIN49045-21,5-ST-VERBLEIT: RNCC: 5 | RNVC: 9
21,5DIN49045-ST-VERBLEIT: RNCC: 5 | RNVC: 9
21-5DIN49045FLUSZSTAHLVERBLEIT: RNCC: 5 | RNVC: 9
1025201-VERBLEIT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-384-2239
Snap-In Hinged Standoff

123842239
47-051-200: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-12-369-2362
Nonmetallic Bumper

123692362
1404003-000.09: RNCC: 2 | RNVC: 2
1404003-000.09: RNCC: 3 | RNVC: 2

8 Jun 2006

5340-12-176-3875
Door Button

121763875
2300013-3615-00: RNCC: 2 | RNVC: 2
9809896: RNCC: 3 | RNVC: 2
2300013-3615-00: RNCC: 5 | RNVC: 2
2300013-3615-00: RNCC: 5 | RNVC: 9
2300013-3615-00: RNCC: 5 | RNVC: 9

27 Nov 1978

5340-12-198-7058
Dust And Moisture Seal Protective Cap

121987058
2500138-190200.11: RNCC: 2 | RNVC: 2
2500138-190200.11: RNCC: 5 | RNVC: 9

20 Feb 1984

5340-12-378-3774
Mounting Bracket

123783774
5.099-170.0: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-145-6873
Resilient Mount

121456873
DIN95363-B70X45-M14X20-NBR55ST: RNCC: 2 | RNVC: 2
510046-M14X20-NBR55.ST: RNCC: 5 | RNVC: 2
2035040065: RNCC: 5 | RNVC: 2
VG95363-B70X45-M14X20-NBR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-8996
Loop Clamp

123168996
2500168-0800: RNCC: 2 | RNVC: 2
7830434-0800: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-12-144-3117
Compression Cup

121443117
V5-7134-84NBR/772: RNCC: 3 | RNVC: 2
V5-7134-26PE772: RNCC: 5 | RNVC: 2
0004-5812-750: RNCC: 5 | RNVC: 2
0004-5812-750: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-176-3418
Hoist Hook

121763418
STUBAI5000/STAHL: RNCC: 3 | RNVC: 9
STUBAI5000: RNCC: 3 | RNVC: 9
5000: RNCC: 5 | RNVC: 9
STUBAI5000/STAHL: RNCC: 5 | RNVC: 9

23 Nov 1978

5340-12-366-5089
Nonmetallic Bumper

123665089
1000042-00-714000.48: RNCC: 3 | RNVC: 2

2 May 2005

5340-12-183-1918
Angle Bracket

121831918
23114-5701.01: RNCC: 2 | RNVC: 2
23114-5701.01: RNCC: 3 | RNVC: 2
23114-5701.01: RNCC: 5 | RNVC: 9
23114-5701-01: RNCC: 5 | RNVC: 9
23114-5701.01: RNCC: 5 | RNVC: 9
23114-5701-01: RNCC: 5 | RNVC: 9

25 Mar 1980

5340-12-183-3800
Mending Plate

121833800
54-2534-981-21: RNCC: 3 | RNVC: 2

10 Apr 1980

5340-12-177-3195
Handwheel

121773195
DIN390-B50-GTW: RNCC: 2 | RNVC: 2
B50DIN390GTW35: RNCC: 5 | RNVC: 2

29 Jan 1979

5340-12-329-1242
Block Clamp

123291242
160-704040-11: RNCC: 3 | RNVC: 2
160-704040-11: RNCC: 5 | RNVC: 9

18 Jul 1992

5340-12-157-8882
Buckle

121578882
DIN5292-32-ST-VERZINKT MATT: RNCC: 2 | RNVC: 2
32DIN5292STVERZINKTMATT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-356-2409
Mounting Plate

123562409
2339-150000A11B: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-152-8895
Loop Clamp

121528895
23114-5718.00: RNCC: 2 | RNVC: 2
23114-5718-00: RNCC: 3 | RNVC: 2
1123372: RNCC: 5 | RNVC: 9
23114-5718-00: RNCC: 5 | RNVC: 9
23114-5718-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-168-5685
Mending Plate

121685685
1000025-260610-20: RNCC: 3 | RNVC: 2
1000025-260610.20: RNCC: 3 | RNVC: 2
1000025-260610-20: RNCC: 5 | RNVC: 9
1000025-260610.20: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-300-2180
Angle Bracket

123002180
23114-1900.51: RNCC: 2 | RNVC: 2
23114-1900.51: RNCC: 3 | RNVC: 2
23114-1900-51: RNCC: 5 | RNVC: 9
23114-1900.51: RNCC: 5 | RNVC: 9
23114-1900-51: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-197-4418
Electrical-Mechanical Equipment Post

121974418
ESK1979-5-1: RNCC: 3 | RNVC: 2

24 Oct 1983

5340-12-326-5668
Catch Strike

123265668
1490-9330.05: RNCC: 3 | RNVC: 2
1490-9330.05: RNCC: 5 | RNVC: 2

8 Oct 1991

5340-12-043-9938

5340-12-386-5034
Loop Clamp

123865034
CL-7: RNCC: 3 | RNVC: 2

7 Sep 2011

5340-12-380-8354
Loop Clamp

123808354
521L02016/1: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-701-2688
Mounting Bracket

127012688
5.12.4805.0420.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-382-7823
Handwheel

123827823
0018-2992-280: RNCC: 3 | RNVC: 2

9 Aug 2010

5340-12-354-8339
Access Cover

123548339
8262-0017: RNCC: 2 | RNVC: 2
8262-0017: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-376-3321
Lock-Release Lever

123763321
GN300-78-M8-32-SW: RNCC: 3 | RNVC: 2

15 Sep 2008

5340-12-153-6304
Nut And Bolt Locking Plate

121536304
100355-121000.01: RNCC: 2 | RNVC: 2
100355-121000-01: RNCC: 3 | RNVC: 2
100355-121000-01: RNCC: 5 | RNVC: 9
100355-121000-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-355-6433
Dust And Moisture Seal Protective Plug

123556433
1179870045: RNCC: 3 | RNVC: 2

30 Nov 2001

5340-12-305-6077
Mending Plate

123056077
1000042-112200.14: RNCC: 3 | RNVC: 2
1000042-112200-14: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-12-314-2226
Electrical-Mechanical Equipment Post

123142226
6100127-3200.32: RNCC: 2 | RNVC: 2
VG95148B6XM3X12-POLYAMID,SCHWARZ: RNCC: 3 | RNVC: 2
DIK-M3X12: RNCC: 5 | RNVC: 2
8793590053: RNCC: 5 | RNVC: 9

17 Jun 1988

5340-12-393-6632
Mounting Bracket

123936632
4100076-722405.002.0: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-389-1418
Expansion Shield

123891418
924174: RNCC: 3 | RNVC: 2
07402240: RNCC: 5 | RNVC: 2
924174: RNCC: 5 | RNVC: 2
2500599990: RNCC: 5 | RNVC: 2

30 May 2012

5340-12-172-6393

5340-12-359-6774
Angle Bracket

123596774
2500261-187075.000.0: RNCC: 2 | RNVC: 2
2500261-187075.000.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-340-1742
Flush Lock

123401742
3216Z: RNCC: 3 | RNVC: 2
3216Z-RECHTS: RNCC: 5 | RNVC: 2
GSV3216Z: RNCC: 5 | RNVC: 2

9 Mar 1996

5340-12-334-4184
Runner

123344184
702-241500-978-0: RNCC: 3 | RNVC: 2

5 May 1994

5340-12-313-9158
Leather Strap

123139158
NO PRIMARY REF 12-313-9158: RNCC: 3 | RNVC: 2
3700311: RNCC: 5 | RNVC: 9
A20X350DIN6408SCHWARZ,GENIETET: RNCC: 5 | RNVC: 9
DIN6408-A20X350SCHWARZ,GENIETET: RNCC: 5 | RNVC: 9

20 May 1988

5340-12-368-6843
Angle Bracket

123686843
SK926-010200.001.3: RNCC: 3 | RNVC: 2

6 Apr 2006

5340-12-310-2991
Mending Plate

123102991
5801758-0800.03: RNCC: 2 | RNVC: 2
5801758-0800.03: RNCC: 3 | RNVC: 2

7 May 1987

5340-12-321-9423
Metal Runner

123219423
702-141400-907-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-388-8692
Access Cover

123888692
1001051: RNCC: 3 | RNVC: 2
SK903-043340.000.0: RNCC: 5 | RNVC: 2
4616804531: RNCC: 5 | RNVC: 2

2 May 2012

5340-12-321-3156
Mounting Bracket

123213156
704-122570-000-0: RNCC: 3 | RNVC: 2

4 May 1990

5340-12-701-6571
Loop Clamp

127016571
VG95211-ML-127016571: RNCC: 2 | RNVC: 2
5.12.7208.8100.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-191-8406
Webbing Strap

121918406
23250-172250.000.0: RNCC: 2 | RNVC: 2
81968025016: RNCC: 3 | RNVC: 2
81.96802.5016: RNCC: 5 | RNVC: 2
23250-172250.000.0: RNCC: 5 | RNVC: 9

9 Mar 1982

5340-12-304-4816
Door Handle

123044816
5801435-512200.00.0: RNCC: 2 | RNVC: 2
5801435-512200.00.0: RNCC: 3 | RNVC: 2

23 Jul 1985

5340-12-175-9822
Spring Loaded Cylinder Fastener

121759822
BK7003: RNCC: 3 | RNVC: 2
1193-11.00: RNCC: 3 | RNVC: 2
1193-11-00: RNCC: 5 | RNVC: 2
BK7003: RNCC: 5 | RNVC: 9

2 Nov 1978

5340-12-300-2175
Retaining Strap

123002175
23114-1900.26: RNCC: 2 | RNVC: 2
23114-1900.26: RNCC: 3 | RNVC: 2
23114-1900-26: RNCC: 5 | RNVC: 9
23114-1900-26: RNCC: 5 | RNVC: 9
23114-1900.26: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-172-2528
Flush Catch Claw

121722528
VG95136B2-58X38-TEIL 3: RNCC: 2 | RNVC: 2
VG95136B2-58X38-TEIL 3: RNCC: 3 | RNVC: 2
602K0207-3: RNCC: 3 | RNVC: 2
VG95136B2-58X38-TEIL 3: RNCC: 5 | RNVC: 9

4 Jan 1978

5340-12-337-7698
Support Hook

123377698
4607920284: RNCC: 3 | RNVC: 2
721 1 77 154 1: RNCC: 3 | RNVC: 9
S 721 1 77 154 1: RNCC: 5 | RNVC: 9

10 Apr 1995

5340-12-198-5389
Dust And Moisture Seal Protective Cap

121985389
431300: RNCC: 3 | RNVC: 2
81.96410.0426: RNCC: 5 | RNVC: 2
81964100426: RNCC: 5 | RNVC: 2
431.3.00: RNCC: 5 | RNVC: 9

7 Feb 1984

5340-12-346-2450
Retaining Strap

123462450
3.0402.01.9.0034: RNCC: 3 | RNVC: 9
1203 7223: RNCC: 5 | RNVC: 2

2 Jul 1998

5340-12-701-3348
Mounting Bracket

127013348
VG95211-ML-127013348: RNCC: 2 | RNVC: 2
5.12.5105.8020.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2399
Mounting Plate

127012399
VG95211-ML-127012399: RNCC: 2 | RNVC: 2
5.12.2402.3001.01: RNCC: 3 | RNVC: 2

6 Feb 1995

Load More Results