What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 125 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 125 of 178

5340-12-361-9985
Magnetic Catch

123619985
6020014: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-12-331-3166
Access Cover

123313166
6503320033: RNCC: 3 | RNVC: 2

21 Apr 1993

5340-12-024-7545

5340-12-163-9478
Nonmetallic Bumper

121639478
330822392: RNCC: 3 | RNVC: 2
330822392: RNCC: 3 | RNVC: 2
330822392: RNCC: 3 | RNVC: 2
22392: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-350-4344
Section Block Clamp

123504344
JN0413M34: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-337-7189
Multiple Angle Bracket

123377189
2300042-241000.002: RNCC: 2 | RNVC: 2
9893656: RNCC: 3 | RNVC: 2
9893656: RNCC: 5 | RNVC: 9
2300042-241000.002: RNCC: 5 | RNVC: 9

3 Apr 1995

5340-12-383-9409
Shimmy Damper

123839409
700 410 507 000: RNCC: 3 | RNVC: 2

27 Dec 2010

5340-12-349-1743
Strap Hinge

123491743
2300387-640230.004: RNCC: 2 | RNVC: 2
9916259: RNCC: 3 | RNVC: 2
9916259: RNCC: 5 | RNVC: 9
2300387-640230.004: RNCC: 5 | RNVC: 9

5 Oct 1999

5340-12-164-0367

5340-12-350-6808
Mounting Bracket

123506808
10063-311000.01: RNCC: 3 | RNVC: 2
10063-311000.01: RNCC: 5 | RNVC: 9

4 May 2000

5340-12-338-3225
Access Door

123383225
1853901: RNCC: 3 | RNVC: 2
EZ18539: RNCC: 5 | RNVC: 2

23 Jun 1995

5340-12-307-0871
Helical Compression Spring Retainer

123070871
12401: RNCC: 3 | RNVC: 2

7 May 1986

5340-12-301-5809
Rod End Connector

123015809
4178674: RNCC: 3 | RNVC: 2

25 Oct 1984

5340-12-198-7890
Nonmetallic Bumper

121987890
3173230344: RNCC: 3 | RNVC: 2

27 Feb 1984

5340-12-323-1503
Support Hook

123231503
6012230141: RNCC: 3 | RNVC: 2

29 Oct 1990

5340-12-179-1359
Loop Clamp

121791359
LN9491BK63: RNCC: 2 | RNVC: 2

8 Jun 1979

5340-12-358-8759
Loop Clamp

123588759
054306618: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-095-0433

5340-12-145-9539
Catch Strike

121459539
5800494-1120: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-180-3428
Dust And Moisture Seal Protective Cap

121803428
NO PRIMARY REF 12-180-3428: RNCC: 3 | RNVC: 2
0005010281: RNCC: 5 | RNVC: 2
856: RNCC: 5 | RNVC: 9

5 Sep 1979

5340-12-308-9038
Electrical-Mechanical Equipment Post

123089038
VG95148A8XM4X189-AL-ELOXIERT: RNCC: 2 | RNVC: 2
VG95148A8XM4X189-AL-ELOXIERT: RNCC: 3 | RNVC: 2
KM.S01-230000.004: RNCC: 3 | RNVC: 2

27 Nov 1986

5340-12-347-8280
Dust And Moisture Seal Protective Cover

123478280
T18-0003-003: RNCC: 3 | RNVC: 2

18 Feb 1999

5340-12-305-5192
Nonmetallic Bumper

123055192
81960200294: RNCC: 3 | RNVC: 2
82200-FT469/81.010/262.NR55: RNCC: 5 | RNVC: 2
FT469/81.010/262: RNCC: 5 | RNVC: 2
FT46981010262: RNCC: 5 | RNVC: 2
81.96020.0294: RNCC: 5 | RNVC: 2

18 Nov 1985

5340-12-311-2587
Mending Plate

123112587
47840-001: RNCC: 3 | RNVC: 2
47 840-001: RNCC: 5 | RNVC: 9

11 Aug 1987

5340-12-177-5074
Angle Bracket

121775074
37 311-001: RNCC: 3 | RNVC: 2
37311-001: RNCC: 5 | RNVC: 2

5 Feb 1979

5340-12-152-5535
Butt Hinge Leaf

121525535
E7101-02-110-01: RNCC: 3 | RNVC: 2
7101-02-110-01: RNCC: 5 | RNVC: 2
7101-02-110.01: RNCC: 5 | RNVC: 2
161792217: RNCC: 5 | RNVC: 2
E161792217: RNCC: 5 | RNVC: 2
7101-02-110-01: RNCC: 5 | RNVC: 9
7101-02-110.01: RNCC: 5 | RNVC: 9
E7101-02-110-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-8254
Loop Clamp

121648254
050-0030-054-020: RNCC: 3 | RNVC: 2
050 000 005 018: RNCC: 3 | RNVC: 2
1123-066: RNCC: 5 | RNVC: 2
1123066: RNCC: 5 | RNVC: 2
8408148: RNCC: 5 | RNVC: 2
0500030054020: RNCC: 5 | RNVC: 2
50157000: RNCC: 5 | RNVC: 2
050000005018: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-154-5734
Spring Tension Clip

121545734
C42117-A248-C215: RNCC: 3 | RNVC: 2
C42117A248C215: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-351-2165
Access Cover

123512165
3099-00-044000: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-171-8412
Rod End Clevis

121718412
PAN4556-1: RNCC: 3 | RNVC: 2

22 Nov 1977

5340-12-306-3566
Angle Bracket

123063566
A-231156-003: RNCC: 3 | RNVC: 2
A231156-003: RNCC: 5 | RNVC: 2

24 Feb 1986

5340-12-382-0219
Webbing Strap

123820219
2 0098-569: RNCC: 3 | RNVC: 2

28 Apr 2010

5340-12-310-2960
Access Cover

123102960
23223-395000.09.0: RNCC: 2 | RNVC: 2
23223-395000.09.0: RNCC: 3 | RNVC: 2

6 May 1987

5340-12-388-2131
Retaining Bail

123882131
JT 302 601 A: RNCC: 3 | RNVC: 2
JT 302 601 A: RNCC: 5 | RNVC: 2

2 Mar 2012

5340-12-332-7215
Turnbuckle

123327215
20.206-4/88: RNCC: 3 | RNVC: 2

10 Sep 1993

5340-12-311-4595
Turnbuckle

123114595
2300223-261017.00.0: RNCC: 2 | RNVC: 2
53195: RNCC: 3 | RNVC: 2
MA3022: RNCC: 5 | RNVC: 2
VSK14/5(29): RNCC: 5 | RNVC: 2

4 Sep 1987

5340-12-199-6411
Extension Drawer Slide

121996411
036.14527: RNCC: 3 | RNVC: 2
102-828-2: RNCC: 3 | RNVC: 2
4900123-1910.01: RNCC: 5 | RNVC: 9
4900123-1910.01: RNCC: 5 | RNVC: 9
4900123-1910.01: RNCC: 5 | RNVC: 9

18 May 1984

5340-12-185-9891
Retaining Strap

121859891
12867-872: RNCC: 3 | RNVC: 2
10872-3-012867: RNCC: 5 | RNVC: 2
10872-3-012867: RNCC: 5 | RNVC: 2

15 Nov 1980

5340-12-325-9917
Butt Hinge

123259917
DIN7956-50X1,5-15-ST-BK-U: RNCC: 2 | RNVC: 2
6010066: RNCC: 3 | RNVC: 2
C50X1,5DIN7956-ST: RNCC: 5 | RNVC: 2

29 Jul 1991

5340-12-701-6999
Angle Bracket

127016999
VG95211-ML-127016999: RNCC: 2 | RNVC: 2
5.12.7230.2060.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-380-0356
Block Clamp

123800356
242/4921-01-24-00: RNCC: 3 | RNVC: 2
242-4921-01-24-00: RNCC: 5 | RNVC: 2

21 Sep 2009

5340-12-303-6612
Plastic Bumper

123036612
228161: RNCC: 3 | RNVC: 9
9244-00.01: RNCC: 3 | RNVC: 9

18 Apr 1985

5340-12-365-4823
Mounting Bracket

123654823
J27420222-405: RNCC: 3 | RNVC: 2

10 Jan 2005

5340-12-182-0549
Hand Crank

121820549
1964-24-11-00: RNCC: 3 | RNVC: 2
1964-24-11-00: RNCC: 5 | RNVC: 2
S139: RNCC: 5 | RNVC: 2

9 Jan 1980

5340-12-347-8295
Manual Control Lever

123478295
2300421-183215.000: RNCC: 2 | RNVC: 2
9917027: RNCC: 3 | RNVC: 2
2300421-183215.000: RNCC: 5 | RNVC: 2
2300421-183215.000: RNCC: 5 | RNVC: 9
9917027: RNCC: 5 | RNVC: 9

19 Feb 1999

5340-12-339-1205
Mounting Bracket

123391205
393-206070.000: RNCC: 3 | RNVC: 9
9847303: RNCC: 5 | RNVC: 9

12 Oct 1995

5340-12-316-1511
Spring Tension Clip

123161511
13416: RNCC: 3 | RNVC: 2
3099880378: RNCC: 5 | RNVC: 2
01-3257: RNCC: 5 | RNVC: 2

24 Dec 1988

5340-12-192-8958
Spring Tension Clip

121928958
3097230055: RNCC: 3 | RNVC: 2
3097230055: RNCC: 5 | RNVC: 2
7211660561: RNCC: 5 | RNVC: 2
3097230055: RNCC: 5 | RNVC: 2
7211660561: RNCC: 5 | RNVC: 2
8727-14: RNCC: 5 | RNVC: 2
3097230055: RNCC: 5 | RNVC: 2
9223388580: RNCC: 5 | RNVC: 2

3 Jun 1982

5340-12-388-8565
Webbing Strap

123888565
NO PRIMARY REF 12-388-8565: RNCC: 3 | RNVC: 2
3310513: RNCC: 5 | RNVC: 2

30 Apr 2012

5340-12-393-5448
Angle Bracket

123935448
11.44143-0184: RNCC: 3 | RNVC: 2
11.44143-0184: RNCC: 5 | RNVC: 2

24 Sep 2013

5340-12-341-9718
Butt Hinge Leaf

123419718
DIN31212-A5X6X60: RNCC: 2 | RNVC: 2

22 Nov 1996

5340-12-315-4021
Cane Bolt

123154021
2526-60X50-MS: RNCC: 3 | RNVC: 2
GSV2526-MS-60X50: RNCC: 5 | RNVC: 2

19 Oct 1988

5340-12-351-3426
Mechanical Stop

123513426
23290-184413.000: RNCC: 2 | RNVC: 2
9872319: RNCC: 3 | RNVC: 2
23290-184413.000: RNCC: 5 | RNVC: 9
9872319: RNCC: 5 | RNVC: 9

17 Jul 2000

5340-12-329-9126
Electrical-Mechanical Equipment Post

123299126
VG95148C5XM3X5-CUZN: RNCC: 2 | RNVC: 2
DA5-M3X5: RNCC: 3 | RNVC: 2

13 Oct 1992

5340-12-702-6523
Retaining Band

127026523
VG95211-ML-127026523: RNCC: 2 | RNVC: 2
LAETSAR-KF-0,5 1GR TU 38.103171-: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-354-1673
Nonmetallic Bumper

123541673
5-612-3151: RNCC: 3 | RNVC: 2

12 Jun 2001

5340-12-319-1473
Shimmy Damper

123191473
6100126-0000.08: RNCC: 2 | RNVC: 2
282308: RNCC: 3 | RNVC: 2
8797031003: RNCC: 5 | RNVC: 9

11 Sep 1989

5340-12-362-5486
Rod End Clevis

123625486
J94320320-401: RNCC: 3 | RNVC: 2

6 Mar 2004

5340-12-372-9839
Shimmy Damper

123729839
370003-06: RNCC: 3 | RNVC: 2

13 Sep 2007

5340-12-387-5783
Angle Bracket

123875783
81617010262: RNCC: 3 | RNVC: 2
81.61701-0262: RNCC: 5 | RNVC: 2

11 Jan 2012

5340-12-179-2281
Retaining Strap

121792281
2300109-180000-014-0: RNCC: 3 | RNVC: 2
2300109-180000.014.0: RNCC: 3 | RNVC: 2
2300109-180000-014-0: RNCC: 3 | RNVC: 2
2300109-180000.014.0: RNCC: 5 | RNVC: 9
2300109-180000-014-0: RNCC: 5 | RNVC: 9

18 Jun 1979

5340-12-361-5311
Turnbuckle

123615311
2782-360200-000-0: RNCC: 3 | RNVC: 2

14 Oct 2003

5340-12-390-4248
Access Cover

123904248
SK976-172925.000.0: RNCC: 3 | RNVC: 2
7087576: RNCC: 5 | RNVC: 2

12 Nov 2012

5340-12-358-5469
Access Cover

123585469
5411310021: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-334-5471
Butt Hinge Leaf

123345471
073-292220-000-0: RNCC: 2 | RNVC: 2
073-292220-000-0: RNCC: 3 | RNVC: 2

24 May 1994

5340-12-701-6643
Angle Bracket

127016643
VG95211-ML-127016643: RNCC: 2 | RNVC: 2
5.12.7210.2070.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-6875
Mounting Bracket

127026875
VG95211-ML-127026875: RNCC: 2 | RNVC: 2
5.51.0602.1512.98: RNCC: 3 | RNVC: 2

25 Apr 1995

5340-12-374-9057
Webbing Strap

123749057
353 6956-001: RNCC: 3 | RNVC: 2
353 6956-001: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-12-348-8856
Mounting Bracket

123488856
245/7346-46-10-00: RNCC: 3 | RNVC: 2

31 Aug 1999

5340-12-371-7679
Angle Bracket

123717679
82974860023: RNCC: 3 | RNVC: 2
82.97486-0023: RNCC: 5 | RNVC: 2
82.97486.0023: RNCC: 5 | RNVC: 2

14 May 2007

5340-12-321-9749
Retaining Strap

123219749
NA10: RNCC: 3 | RNVC: 2
NYLF1X-A10: RNCC: 5 | RNVC: 2
Q531419717: RNCC: 5 | RNVC: 2

13 Jul 1990

5340-12-356-6973
Verriegelung Hebel

5340-12-336-0427
Dust And Moisture Seal Protective Plug

123360427
910/3280: RNCC: 3 | RNVC: 2
GPN910/3280: RNCC: 5 | RNVC: 2
KAPSTO910/3280SCHWARZ: RNCC: 5 | RNVC: 2

14 Oct 1994

5340-12-324-1315
Angle Bracket

123241315
NO PRIMARY REF 12-324-1315: RNCC: 3 | RNVC: 2
2500213-20.02: RNCC: 5 | RNVC: 9

23 Jan 1991

5340-12-191-5908
Electrical-Mechanical Equipment Post

121915908
536077-0068.000: RNCC: 3 | RNVC: 2
536077-0068.000: RNCC: 5 | RNVC: 9
536077-0068: RNCC: 5 | RNVC: 9
536077-0068.000: RNCC: 5 | RNVC: 9
536077-0068: RNCC: 5 | RNVC: 9

15 Feb 1982

5340-12-701-2856
Mounting Bracket

127012856
VG95211-ML-127012856: RNCC: 2 | RNVC: 2
5.12.5101.1260.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5760
Mounting Bracket

127025760
VG95211-ML-127025760: RNCC: 2 | RNVC: 2
5.51.7801.0006.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6991
Loop Clamp

127016991
VG95211-ML-127016991: RNCC: 2 | RNVC: 2
5.12.7230.1202.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-703-3067
Mending Plate

127033067
VG95211-ML-127033067: RNCC: 2 | RNVC: 2
5.12.2210.1602.02: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-702-5058
Mounting Bracket

127025058
VG95211-ML-127025058: RNCC: 2 | RNVC: 2
5.51.6501.0840.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-315-4958
Angle Bracket

123154958
5802005-201900.03: RNCC: 2 | RNVC: 2
65.7789.255.02-A001: RNCC: 3 | RNVC: 2

29 Oct 1988

5340-12-149-9029
Resilient Mount

121499029
DIN95369-A2-1-CR-ST: RNCC: 2 | RNVC: 2
151003-M10-CR.ST-40: RNCC: 5 | RNVC: 2
C1010G: RNCC: 5 | RNVC: 2
60-101-040: RNCC: 5 | RNVC: 2
VG95369-A2-1-CR-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-5463
Double Angle Bracket

123015463
2300106-230000.11: RNCC: 2 | RNVC: 2
2300106-230000.11: RNCC: 3 | RNVC: 2
2300106-230000.11: RNCC: 5 | RNVC: 9
2300106-230000.11: RNCC: 5 | RNVC: 9

24 Oct 1984

5340-12-339-7413
Mounting Plate

123397413
2300202-000100.000: RNCC: 2 | RNVC: 2
2300202-000100.000: RNCC: 3 | RNVC: 2
2300202-000100.000: RNCC: 5 | RNVC: 9

9 Jan 1996

5340-12-173-9992
Angle Bracket

121739992
2348-122: RNCC: 3 | RNVC: 2
2348122: RNCC: 5 | RNVC: 2

29 May 1978

5340-12-197-5495
Electrical-Mechanical Equipment Post

121975495
VG95148B5XM3X5-2.0380.30-E3E: RNCC: 2 | RNVC: 2
VG95148B5XM3X5-2.0380.30-E3E: RNCC: 3 | RNVC: 2
DISTIN-3050 M-5: RNCC: 3 | RNVC: 2
C 3822 161 MN: RNCC: 5 | RNVC: 2
C3822161MN: RNCC: 5 | RNVC: 2
C 3822 161 MN: RNCC: 5 | RNVC: 2
C3822161MN: RNCC: 5 | RNVC: 2

2 Nov 1983

5340-12-352-0440
Dust And Moisture Seal Protective Plug

123520440
TL-2-234: RNCC: 3 | RNVC: 2
7956106044: RNCC: 5 | RNVC: 2

10 Oct 2000

5340-12-700-8585
Threaded End Tensioning Tie Rod

127008585
VG95211-ML-127008585: RNCC: 2 | RNVC: 2
155N1220-22-2-620: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-307-8761
Metal Runner

123078761
5801698-1000.01: RNCC: 2 | RNVC: 2
5801698-1000.01: RNCC: 3 | RNVC: 2
5801698-1000-01: RNCC: 5 | RNVC: 2

6 Aug 1986

5340-12-136-8979
Retaining Strap

121368979
8403385: RNCC: 3 | RNVC: 2
0047-104: RNCC: 5 | RNVC: 2
0047104: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-162-8473
Friction Catch

121628473
4078: RNCC: 3 | RNVC: 2
1918-121800-051: RNCC: 5 | RNVC: 2
1918-121800-051: RNCC: 5 | RNVC: 9
1918-121800.051: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-389-9377
Lock Key Set

123899377
KV2066: RNCC: 3 | RNVC: 2

14 Sep 2012

5340-12-327-5209
Dust And Moisture Seal Protective Plug

123275209
11227917301: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-12-348-7155
Loop Clamp

123487155
249104663: RNCC: 3 | RNVC: 2

10 Aug 1999

5340-12-360-2719
Angle Bracket

123602719
81424032547: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-12-150-7191

5340-12-132-8000

5340-12-173-5038
Swivel Caster

121735038
126A6-55NY: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-12-188-7151
Resilient Mount

121887151
034154: RNCC: 3 | RNVC: 2

27 Jul 1981

5340-12-309-7931
Access Cover

123097931
6131912: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-305-1142
Double Angle Bracket

123051142
4900059-982114.004.0: RNCC: 3 | RNVC: 2

27 Sep 1985

5340-12-193-2030
Angle Bracket

121932030
4608351314: RNCC: 3 | RNVC: 2
721 1 88 252 1: RNCC: 5 | RNVC: 9

30 Jun 1982

5340-12-302-0602
Access Cover

123020602
4.430.493: RNCC: 3 | RNVC: 2
4 430493: RNCC: 5 | RNVC: 2
4 430493: RNCC: 5 | RNVC: 2

29 Nov 1984

5340-12-371-5564
Retaining Bail

123715564
2300495-970158.003.0: RNCC: 3 | RNVC: 2
1715939: RNCC: 5 | RNVC: 9

18 Apr 2007

5340-12-317-2349
Eye Hook

123172349
2300223-261020.00.0: RNCC: 2 | RNVC: 2
2300223-261020.00.0: RNCC: 3 | RNVC: 2
760272610: RNCC: 5 | RNVC: 2

20 Mar 1989

5340-12-307-1081
Spring Tension Clip

123071081
2300007-263015.000.0: RNCC: 2 | RNVC: 2
2300007-263015.000.0: RNCC: 3 | RNVC: 2
2300007-263015.000.0: RNCC: 5 | RNVC: 2

12 May 1986

5340-12-043-9487

5340-12-380-7864
Loop Clamp

123807864
1548777: RNCC: 3 | RNVC: 2

30 Nov 2009

5340-12-365-3940
Webbing Strap

123653940
80303460: RNCC: 3 | RNVC: 2

28 Dec 2004

5340-12-317-2983
Escutcheon Plate

123172983
3227660425: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-381-6359
Catch Strike

123816359
504199058: RNCC: 3 | RNVC: 2

11 Mar 2010

5340-12-391-1552
Loop Clamp

123911552
U7112: RNCC: 3 | RNVC: 2

21 Feb 2013

5340-12-181-6254
Webbing Strap

121816254
CF 453 565 AU: RNCC: 2 | RNVC: 2
82300-CF453565AU: RNCC: 3 | RNVC: 2
CF453565AU: RNCC: 3 | RNVC: 2
CF453565AU: RNCC: 5 | RNVC: 2
CF 453 565 AU: RNCC: 5 | RNVC: 2
CF453565AU: RNCC: 5 | RNVC: 2
CF 453 565 AU: RNCC: 5 | RNVC: 2
CF453565AU: RNCC: 5 | RNVC: 2
CF 453 565 AU: RNCC: 5 | RNVC: 2
82300-O160X20-NR-ST-OG: RNCC: 6 | RNVC: 9

10 Dec 1979

5340-12-321-8262
Bail Handle

123218262
3373 1021 00: RNCC: 3 | RNVC: 2
8100105-1116: RNCC: 5 | RNVC: 9

29 Jun 1990

5340-12-701-8781
Dust And Moisture Seal Protective Cap

127018781
VG95211-ML-127018781: RNCC: 2 | RNVC: 2
76-7211-92: RNCC: 3 | RNVC: 2
0501393517690: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-192-1395
Electrical-Mechanical Equipment Post

121921395
4540390: RNCC: 3 | RNVC: 2
454.0390: RNCC: 5 | RNVC: 9
5801602-120000-001: RNCC: 5 | RNVC: 9

29 Mar 1982

5340-12-194-9384
Mending Plate

121949384
66.3851.225.01-A002: RNCC: 3 | RNVC: 2
161583: RNCC: 5 | RNVC: 2
66-3851-225-01A002: RNCC: 5 | RNVC: 9

21 Dec 1982

5340-12-702-7097
Access Cover

127027097
25-08301006984: RNCC: 2 | RNVC: 2

5 Dec 1995

5340-12-186-8637
Turnbuckle

121868637
2390-1220.02: RNCC: 2 | RNVC: 2
87.12.00000.0029: RNCC: 3 | RNVC: 2
2390-1220.02: RNCC: 3 | RNVC: 2
2390-1220-02: RNCC: 5 | RNVC: 2

13 Feb 1981

5340-12-373-2005
Angle Bracket

123732005
2300061-051939.004: RNCC: 2 | RNVC: 2
2300061-051939.004: RNCC: 3 | RNVC: 2
9948581: RNCC: 5 | RNVC: 9

9 Oct 2007

5340-12-355-9501
Mending Plate

123559501
J92220530-003: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-164-1134
Barrel Bolt

121641134
2512-50: RNCC: 3 | RNVC: 2
GSV2512-50: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-304-5507
Double Angle Bracket

123045507
NO PRIMARY REF 12-304-5507: RNCC: 3 | RNVC: 2
7531 155169: RNCC: 5 | RNVC: 9

30 Jul 1985

5340-12-301-3830
Electronic Equipment Hardware Kit

123013830
M88969-H0100: RNCC: 3 | RNVC: 2

11 Oct 1984

5340-12-309-1900
Resilient Mount

123091900
4602406018: RNCC: 3 | RNVC: 2
82300-4602406018: RNCC: 5 | RNVC: 2
4602406018: RNCC: 5 | RNVC: 2

19 Dec 1986

5340-12-312-2520
Extension Drawer Slide Section

123122520
1562088: RNCC: 3 | RNVC: 2
75D5.3.52-9: RNCC: 5 | RNVC: 2

9 Dec 1987

5340-12-377-5187
Sliding Block

123775187
8605001.3.580.01: RNCC: 3 | RNVC: 2
8605001358001: RNCC: 5 | RNVC: 2

21 Jan 2009

5340-12-301-7813
Catch Strike

123017813
4-69035: RNCC: 3 | RNVC: 2
268846: RNCC: 5 | RNVC: 2

9 Nov 1984

5340-12-314-0188
Spring Tension Clip

123140188
1820128100: RNCC: 3 | RNVC: 2
2968945E5036-53: RNCC: 5 | RNVC: 2

31 May 1988

5340-12-196-6813
Door Handle

121966813
3.31.0225.0: RNCC: 3 | RNVC: 2
3.31.225.0: RNCC: 5 | RNVC: 2
3540E-B: RNCC: 5 | RNVC: 2

1 Aug 1983

5340-12-196-1889
Door Closer

121961889
409-039581: RNCC: 3 | RNVC: 2
409-039581: RNCC: 5 | RNVC: 9

9 Jun 1983

5340-12-184-9319
Retaining Strap

121849319
3800028-21: RNCC: 2 | RNVC: 2
3800028-21: RNCC: 3 | RNVC: 2
HT36/3891/01: RNCC: 5 | RNVC: 9
3800028-21: RNCC: 5 | RNVC: 9
3800028-21: RNCC: 5 | RNVC: 9

28 Aug 1980

5340-12-335-3962
Retaining Strap

123353962
23176-220000.14.0: RNCC: 2 | RNVC: 2
23176-220000.14.0: RNCC: 3 | RNVC: 2

16 Aug 1994

5340-12-307-1770
Angle Bracket

123071770
E-2630-1-4: RNCC: 2 | RNVC: 2
E-2630-1-4: RNCC: 3 | RNVC: 2
1-2630-3-3: RNCC: 5 | RNVC: 2

20 May 1986

5340-12-351-7597
Retaining Strap

123517597
5.034-265: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-701-4780
Mounting Bracket

127014780
VG95211-ML-127014780: RNCC: 2 | RNVC: 2
5.12.5811.1220.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-363-3256
Angle Bracket

123633256
9997034-188200.001.0: RNCC: 3 | RNVC: 2

27 May 2004

5340-12-701-3255
Rod End Connector

127013255
VG95211-ML-127013255: RNCC: 2 | RNVC: 2
5.12.5101.8620.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6966
Angle Bracket

127016966
VG95211-ML-127016966: RNCC: 2 | RNVC: 2
5.12.7222.8080.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-148-9659
Loop Clamp

121489659
DIN3016-1-A2-10-10X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A2-10-10X15-W1-2: RNCC: 3 | RNVC: 2
RS1.2X10/15: RNCC: 3 | RNVC: 2
4217215010: RNCC: 5 | RNVC: 2
RS1100.2X10/15: RNCC: 5 | RNVC: 2
23176-208000-77-0: RNCC: 5 | RNVC: 2
RS1100-2X10-15: RNCC: 5 | RNVC: 2
DIN3016-A2-10-10X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-703-1101
Pawl Fastener

127031101
VG95211-ML-127031101: RNCC: 2 | RNVC: 2
320.8700-017: RNCC: 3 | RNVC: 2
0500803176469: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-302-8933
Mending Plate

123028933
2W111A008-1300: RNCC: 3 | RNVC: 2

6 Feb 1985

5340-12-342-5328
Lock-Release Lever

123425328
2300421-181972.000: RNCC: 2 | RNVC: 2
9908347: RNCC: 3 | RNVC: 2
2300421-181972.000: RNCC: 5 | RNVC: 2
2300421-181972.000: RNCC: 5 | RNVC: 9
9908347: RNCC: 5 | RNVC: 9

25 Feb 1997

5340-12-330-8902
Access Cover

123308902
2718-300000.000.0: RNCC: 2 | RNVC: 2
2718-300000.000.0: RNCC: 3 | RNVC: 2

19 Feb 1993

5340-12-342-1364
Mounting Bracket

123421364
2500253-271900.002.0: RNCC: 3 | RNVC: 2

17 Dec 1996

5340-12-178-8035
Resilient Mount

121788035
5801215-743: RNCC: 3 | RNVC: 2

18 May 1979

5340-12-041-2986

5340-12-372-8471
Section Block Clamp

123728471
6480030: RNCC: 3 | RNVC: 2

28 Aug 2007

5340-12-372-7699
Dust And Moisture Seal Protective Cap

123727699
11280841400: RNCC: 3 | RNVC: 2

20 Aug 2007

5340-12-327-1323
Mounting Plate

123271323
P.ZT01.2000.11: RNCC: 3 | RNVC: 2

5 Dec 1991

5340-12-343-4434
Hinge Torsion Bar

123434434
078-131000-901-0: RNCC: 2 | RNVC: 2
078-131000-901-0: RNCC: 3 | RNVC: 2

23 Jun 1997

5340-12-364-3905
Dust And Moisture Seal Protective Cap

123643905
HP20-0-RT001: RNCC: 3 | RNVC: 2
5190858: RNCC: 5 | RNVC: 2

18 Sep 2004

5340-12-386-2174
Loop Clamp

123862174
DIN3016-1-D1-38X20-W1-2-NBR: RNCC: 2 | RNVC: 2

17 Aug 2011

5340-12-157-6732
Spring Tension Clip

121576732
23305-312000.85.0: RNCC: 2 | RNVC: 2
0281 3828: RNCC: 5 | RNVC: 2
2813828EE7205-31: RNCC: 5 | RNVC: 2
23305-312000-85-0: RNCC: 5 | RNVC: 2
23305-312000.85.0: RNCC: 5 | RNVC: 2
867012508: RNCC: 5 | RNVC: 2
23305-312000-85-0: RNCC: 5 | RNVC: 9
23305-312000.85.0: RNCC: 5 | RNVC: 9
2813828: RNCC: 5 | RNVC: 9
E867012508: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-373-5725
Dust And Moisture Seal Protective Plug

123735725
KB8SCHWARZ: RNCC: 3 | RNVC: 2
KB8-SCHWARZ: RNCC: 5 | RNVC: 2

16 Nov 2007

5340-12-337-9903
Mounting Bracket

123379903
9165623000: RNCC: 3 | RNVC: 2
(241)A396300119299: RNCC: 5 | RNVC: 2
00119299: RNCC: 5 | RNVC: 2
570497077: RNCC: 5 | RNVC: 2
81423890001: RNCC: 5 | RNVC: 2
916 562-3000: RNCC: 5 | RNVC: 2
916562-3000: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-354-3990
Section Block Clamp

123543990
J29120263-001: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-12-151-2260
Ball Socket Seat

121512260
1344-01-03-01-65: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-337-6441
Spacing Threaded Standoff

123376441
VG95148B8XM5X50-ST: RNCC: 2 | RNVC: 2
VG95148-B8XM5X50-ST: RNCC: 3 | RNVC: 2
18H344: RNCC: 3 | RNVC: 2
09 0022 159: RNCC: 5 | RNVC: 2
090022159: RNCC: 5 | RNVC: 2

22 Mar 1995

5340-12-186-8512
Manual Control Handle

121868512
7001-004-168: RNCC: 3 | RNVC: 2
1227-010-013: RNCC: 5 | RNVC: 9

11 Feb 1981

5340-12-351-3515
Access Cover

123513515
10030076: RNCC: 3 | RNVC: 2
232-096794: RNCC: 5 | RNVC: 2

18 Jul 2000

5340-12-196-4998
Bail Handle

121964998
DIN3136-100X80ZN8: RNCC: 2 | RNVC: 2
DIN3136-100X80-ZN8: RNCC: 3 | RNVC: 2
328/100X80GZ8: RNCC: 5 | RNVC: 2
328-100X80G-ZN8: RNCC: 5 | RNVC: 2
328-105-GZ: RNCC: 5 | RNVC: 9
328/105GZ: RNCC: 5 | RNVC: 9

12 Jul 1983

5340-12-159-9689
Rod End Clevis

121599689
224-00172: RNCC: 3 | RNVC: 2
142873001: RNCC: 5 | RNVC: 2
22400172: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-8251
Dust And Moisture Seal Protective Cap

121648251
1480508000: RNCC: 3 | RNVC: 2
SVNK7G1X: RNCC: 5 | RNVC: 2
4794-674: RNCC: 5 | RNVC: 2
4794674: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-186-2315
Dust And Moisture Seal Protective Plug

121862315
242200112016: RNCC: 3 | RNVC: 2
2422-001-12016: RNCC: 5 | RNVC: 2

6 Dec 1980

5340-12-330-0818
Lock-Release Lever

123300818
089321201C: RNCC: 3 | RNVC: 2
089-321-201C: RNCC: 5 | RNVC: 2
089-321-201C: RNCC: 5 | RNVC: 2

30 Oct 1992

5340-12-331-6707
Handle Grip

123316707
409035528: RNCC: 3 | RNVC: 2
409.035 528: RNCC: 5 | RNVC: 2
5L.6097.013.25: RNCC: 5 | RNVC: 2
409.035.528: RNCC: 5 | RNVC: 9
409-035 528: RNCC: 5 | RNVC: 9
409-035528: RNCC: 5 | RNVC: 9

7 Jun 1993

5340-12-191-5690
Hand Crank

121915690
VG85086-B-225X19-AM: RNCC: 2 | RNVC: 2
VG85086-B-225X19-AM: RNCC: 3 | RNVC: 2
VG85086-B-225X19-AM: RNCC: 3 | RNVC: 2
VG85086-B-225X19-AM: RNCC: 3 | RNVC: 9
B225X19VG85086-RG5: RNCC: 5 | RNVC: 9

11 Feb 1982

5340-12-701-5813
Angle Bracket

127015813
VG95211-ML-127015813: RNCC: 2 | RNVC: 2
5.12.6409.1500.33: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-322-6039
Protection Bellows

123226039
1.190-1837T: RNCC: 3 | RNVC: 2
3.243-0223POS3: RNCC: 5 | RNVC: 2

5 Sep 1990

5340-12-319-6683
Webbing Strap

123196683
2782-009702.000.0: RNCC: 2 | RNVC: 2
2782-009702.000.0: RNCC: 3 | RNVC: 2
000-A3-30X1,5X2000-BW-RAL6031: RNCC: 6 | RNVC: 9

24 Oct 1989

5340-12-701-6181
Loop Clamp

127016181
VG95211-ML-127016181: RNCC: 2 | RNVC: 2
5.12.7011.0004.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-2726
Access Cover

123422726
433733 555 25 16 22: RNCC: 3 | RNVC: 2
K86462-84: RNCC: 5 | RNVC: 2
K8646284: RNCC: 5 | RNVC: 2
P86462-84K: RNCC: 5 | RNVC: 2

14 Jan 1997

5340-12-316-4536
Access Cover

123164536
23305-068500-09-0: RNCC: 2 | RNVC: 2
23305-068500-09-0: RNCC: 3 | RNVC: 2
23305-068500-09-0: RNCC: 5 | RNVC: 9

18 Jan 1989

5340-12-392-4869
Loop Clamp

123924869
2500310-250005.000.0: RNCC: 3 | RNVC: 2

12 Jun 2013

5340-12-359-7688
Mounting Plate

123597688
2500261-183400.022.0: RNCC: 2 | RNVC: 2
2500261-183400.022.0: RNCC: 3 | RNVC: 2

10 Mar 2003

5340-12-386-1472
Access Cover

123861472
2500261-183710.000.0: RNCC: 2 | RNVC: 2
2500261-183710.000.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-317-8208
Mounting Bracket

123178208
VG95211-ML-123178208: RNCC: 2 | RNVC: 2
PM60273B-005: RNCC: 3 | RNVC: 2

17 May 1989

5340-12-310-9156
Dust And Moisture Seal Protective Plug

123109156
4616980015: RNCC: 3 | RNVC: 2
8499-29: RNCC: 5 | RNVC: 2
7211840611: RNCC: 5 | RNVC: 9

8 Jul 1987

5340-12-159-8655
Loop Clamp

121598655
DIN3016-1-D2-10-10-10X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.3X10/15: RNCC: 3 | RNVC: 2
DIN3016-D2-10-10-10X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1100.3X10/15: RNCC: 5 | RNVC: 2
4219315010: RNCC: 5 | RNVC: 2
RSGU1100-3X10-15: RNCC: 5 | RNVC: 2
DIN3016-D2-10-10-10X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-9005
Mounting Bracket

127029005
25-08601009394: RNCC: 2 | RNVC: 2

24 Jul 1996

5340-12-141-6735
Retaining Strap

121416735
2635-1318-1: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-306-0148
Double Angle Bracket

123060148
8-6017-00: RNCC: 2 | RNVC: 2
8-6017.00: RNCC: 2 | RNVC: 2
8-6017.00: RNCC: 3 | RNVC: 2
8-6017-00: RNCC: 5 | RNVC: 9
8-6017.00: RNCC: 5 | RNVC: 9

20 Jan 1986

5340-12-339-1036
Butt Hinge

123391036
238 219-00000: RNCC: 3 | RNVC: 2

11 Oct 1995

5340-12-360-9588
Fuehrungs- Schiene

123609588
69000-540: RNCC: 3 | RNVC: 2

31 Jul 2003

5340-12-354-5725
Manual Control Handle

123545725
DIN99-L50-X8CRNIS18-9: RNCC: 2 | RNVC: 2

6 Aug 2001

5340-12-394-4480
Mounting Bracket

123944480
10165-183210.000.0: RNCC: 2 | RNVC: 2
10165-183210.000.0: RNCC: 3 | RNVC: 2

3 Dec 2013

5340-12-198-6839
Spring Tension Clip

121986839
NO81231: RNCC: 3 | RNVC: 2
1-81231: RNCC: 5 | RNVC: 2
N081231: RNCC: 5 | RNVC: 2

17 Feb 1984

5340-12-365-2298
Mounting Plate

123652298
2500075-560500.006.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-358-7083
Retaining Band

123587083
2800-392000.020.0: RNCC: 2 | RNVC: 2
2800-392000.020.0: RNCC: 3 | RNVC: 2

7 Nov 2002

5340-12-342-9302
Helical Compression Spring Retainer

123429302
5011-116: RNCC: 3 | RNVC: 2

16 Apr 1997

5340-12-701-8424
Loop Clamp

127018424
VG95211-ML-127018424: RNCC: 2 | RNVC: 2
5148A-53: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-305-3534
Dust And Moisture Seal Protective Plug

123053534
P009279933306000: RNCC: 3 | RNVC: 2
9279933306: RNCC: 5 | RNVC: 2

25 Oct 1985

5340-12-350-2876
Retaining Strap

123502876
981 018 44: RNCC: 3 | RNVC: 2

13 Mar 2000

5340-12-374-2568
Mounting Plate

123742568
L521M1059214: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-158-7331
Helical Compression Spring Seat

121587331
1410501030: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-316-6753
Dust And Moisture Seal Protective Cap

123166753
5800777-8641: RNCC: 2 | RNVC: 2
5800777-8641: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-381-0121
Loop Clamp

123810121
41231083: RNCC: 3 | RNVC: 2
41231083: RNCC: 5 | RNVC: 2
CV175751A: RNCC: 5 | RNVC: 2

22 Dec 2009

5340-12-305-5309
Butt Hinge Leaf

123055309
LN9172BF60: RNCC: 2 | RNVC: 2
B15X60LN9172: RNCC: 5 | RNVC: 2
LN9172B15X60: RNCC: 5 | RNVC: 2

19 Nov 1985

5340-12-337-3702
Turnbuckle

123373702
90 097 014: RNCC: 3 | RNVC: 2
ART.NR. 4201 0142: RNCC: 5 | RNVC: 2
4201 0142: RNCC: 5 | RNVC: 2
ART.NR. 4201 0142: RNCC: 5 | RNVC: 2
4201 0142: RNCC: 5 | RNVC: 2

21 Feb 1995

5340-12-321-6121
Mounting Bracket

123216121
1706101: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-373-1922
Retaining Strap

123731922
1409950144: RNCC: 3 | RNVC: 2
140 995 01 44: RNCC: 5 | RNVC: 2

9 Oct 2007

5340-12-379-1686
Mounting Bracket

123791686
5803935-61201: RNCC: 2 | RNVC: 2
5803935-61201: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-12-169-7886
Mending Plate

121697886
JJ45595: RNCC: 3 | RNVC: 2

10 Jun 1977

5340-12-329-9664
Mounting Bracket

123299664
0852 8128.003: RNCC: 3 | RNVC: 2
8528128.003: RNCC: 5 | RNVC: 2

16 Oct 1992

5340-12-043-2658

5340-12-042-1178

5340-12-043-2678

5340-12-322-1162
Protection Bellows

123221162
375 181: RNCC: 3 | RNVC: 2
375181: RNCC: 5 | RNVC: 2
9000 8215: RNCC: 5 | RNVC: 2
22992002: RNCC: 5 | RNVC: 2
4.104.01: RNCC: 5 | RNVC: 9

25 Jul 1990

5340-12-369-4037
Runner

123694037
3039498: RNCC: 3 | RNVC: 2
3039.498: RNCC: 5 | RNVC: 2

29 Jun 2006

5340-12-322-7031
Double Angle Bracket

123227031
2300264-264100.07.0: RNCC: 2 | RNVC: 2
2300264-264100.07.0: RNCC: 3 | RNVC: 2

13 Sep 1990

5340-12-177-4974
Dust And Moisture Seal Protective Cap

121774974
2420580001: RNCC: 3 | RNVC: 2
1306940EY0148-17: RNCC: 5 | RNVC: 2
81.11531.0001: RNCC: 5 | RNVC: 2
2420580001: RNCC: 5 | RNVC: 2
0130 6940: RNCC: 5 | RNVC: 2
2 420 580 001: RNCC: 5 | RNVC: 2
81115310001: RNCC: 5 | RNVC: 2
VDPM00715: RNCC: 5 | RNVC: 2
1306940: RNCC: 5 | RNVC: 9
81115310002: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-362-4638
Retaining Strap

123624638
217208: RNCC: 3 | RNVC: 2
217208: RNCC: 5 | RNVC: 9
MM 9241 G 005: RNCC: 5 | RNVC: 9

26 Feb 2004

5340-12-366-7412
Access Cover

123667412
2 0072-615: RNCC: 3 | RNVC: 2
2 0072-615: RNCC: 5 | RNVC: 2

2 Jun 2005

5340-12-306-0742
Mending Plate

123060742
5801984-980410.001.0: RNCC: 2 | RNVC: 2
5801984-980410.001.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-319-1467
Mounting Bracket

123191467
ZJB01811-3: RNCC: 3 | RNVC: 2

11 Sep 1989

5340-12-329-5887
Mounting Bracket

123295887
258775: RNCC: 3 | RNVC: 2

4 Sep 1992

5340-12-022-7107

5340-12-393-5452
Mounting Bracket

123935452
L533M1019235: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-12-338-8787
Angle Bracket

123388787
90298881: RNCC: 3 | RNVC: 2
0856113: RNCC: 5 | RNVC: 2
856113: RNCC: 5 | RNVC: 9

4 Sep 1995

5340-12-379-4672
Clamping Catch

123794672
565.204C: RNCC: 3 | RNVC: 2

27 Jul 2009

5340-12-381-3878
Rigid Caster

123813878
3488DQR260P65: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-12-300-3108
Butt Hinge Leaf

123003108
3097230051: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-189-4056
Loop Clamp

121894056
LN9491BK35: RNCC: 2 | RNVC: 2

24 Sep 1981

5340-12-306-3069
Angle Bracket

123063069
6100135-1100.003: RNCC: 2 | RNVC: 2
4250618114: RNCC: 3 | RNVC: 2

18 Feb 1986

5340-12-141-8250
Loop Clamp

121418250
0331 3142: RNCC: 3 | RNVC: 2
03313142: RNCC: 5 | RNVC: 2
222807V: RNCC: 5 | RNVC: 2
3313142EF0170-01: RNCC: 5 | RNVC: 2
222807V: RNCC: 5 | RNVC: 2
3313142: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-176-6133
Mending Plate

121766133
5801479-3000-004: RNCC: 2 | RNVC: 2
5801479-3000-004: RNCC: 5 | RNVC: 2

11 Dec 1978

5340-12-345-5159
Mounting Bracket

123455159
81619400080: RNCC: 3 | RNVC: 2
20817: RNCC: 5 | RNVC: 2
20817B: RNCC: 5 | RNVC: 2
81.61940-0080: RNCC: 5 | RNVC: 2

26 Mar 1998

5340-12-165-9632
Nonmetallic Bumper

121659632
23290-065001-005: RNCC: 2 | RNVC: 2
23290-065001.005: RNCC: 5 | RNVC: 9

23 Jul 1976

5340-12-305-4557
Mending Plate

123054557
2500121-220000.01: RNCC: 2 | RNVC: 2
2500121-220000.01: RNCC: 3 | RNVC: 2
2500121-220000.01: RNCC: 5 | RNVC: 9

8 Nov 1985

5340-12-195-2609
Dust And Moisture Seal Protective Cap

121952609
PAN3860-06R: RNCC: 3 | RNVC: 2

31 Jan 1983

5340-12-393-7614
Access Cover

123937614
11.07051-0101: RNCC: 3 | RNVC: 2
11.07051-0101: RNCC: 5 | RNVC: 2

9 Oct 2013

5340-12-378-0705
Mounting Plate

123780705
320.001-245: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-144-8734
Butt Hinge Leaf

121448734
B25X3X224HAN16515W3355-7: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-353-9331
Section Block Clamp

123539331
J29120255-001: RNCC: 3 | RNVC: 2

21 May 2001

5340-12-317-7891
Mounting Bracket

123177891
5803475-000200.00: RNCC: 2 | RNVC: 2
5803475-000200.00: RNCC: 3 | RNVC: 2

12 May 1989

5340-12-310-8777
Spacing Threaded Standoff

123108777
PAN5170-08-080: RNCC: 3 | RNVC: 2

3 Jul 1987

5340-12-158-5339
Nonmetallic Bumper

121585339
42179-15000-02: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-319-4689
Mending Plate

123194689
5802006-201212.05: RNCC: 2 | RNVC: 2
5802006-201212.05: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-365-0517
Nonmetallic Bumper

123650517
5160-311160A03B: RNCC: 2 | RNVC: 2
5160-311160A03B: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-702-2007
Angle Bracket

127022007
VG95211-ML-127022007: RNCC: 2 | RNVC: 2
30.7211.1010: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-334-9846
Loop Clamp

123349846
81.97420.0139: RNCC: 3 | RNVC: 2
81.97420-0139: RNCC: 5 | RNVC: 2

7 Jul 1994

5340-12-300-4815
Snap Hook

123004815
TK2540-001-A3: RNCC: 2 | RNVC: 2
2500149-200.00: RNCC: 3 | RNVC: 2
2500149-200.00: RNCC: 3 | RNVC: 2
54 031: RNCC: 5 | RNVC: 2
2500149-200.00: RNCC: 5 | RNVC: 9
2500149-200.00: RNCC: 5 | RNVC: 9
TK-KG34-2540-007: RNCC: 5 | RNVC: 9

4 Aug 1984

5340-12-357-4041
Double Angle Bracket

123574041
J92228149-001: RNCC: 3 | RNVC: 2
4877874: RNCC: 5 | RNVC: 2

18 Jun 2002

5340-12-183-3277
Dust And Moisture Seal Protective Plug

121833277
56-0049-408-03: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-12-354-8360
Access Cover

123548360
5400051-342410.01: RNCC: 2 | RNVC: 2
5400051-342410.01: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-315-4079
Retaining Strap

123154079
100314-1000.05: RNCC: 3 | RNVC: 2
100314-1000.05: RNCC: 5 | RNVC: 9

20 Oct 1988

5340-12-381-2940
Mending Plate

123812940
424-06-AD2: RNCC: 3 | RNVC: 2
4250473100837: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-338-5066
Mounting Plate

123385066
KMS010-820000.001: RNCC: 3 | RNVC: 2
1804857: RNCC: 5 | RNVC: 2

20 Jul 1995

5340-12-342-2129
Access Cover

123422129
78013-51122: RNCC: 3 | RNVC: 9

7 Jan 1997

5340-12-338-1236
Mounting Plate

123381236
230-379.14: RNCC: 3 | RNVC: 2
PK-HH-130: RNCC: 5 | RNVC: 9

26 May 1995

5340-12-702-8596
Nonmetallic Bumper

127028596
52-04066103080: RNCC: 2 | RNVC: 2

5 Jan 1996

5340-12-330-8676
Casement Fastener

123308676
6286LINKS-MS: RNCC: 3 | RNVC: 2
6286LINKS: RNCC: 5 | RNVC: 9

17 Feb 1993

5340-12-198-0964
Angle Bracket

121980964
1200096-111320014: RNCC: 2 | RNVC: 2

20 Dec 1983

5340-12-318-7327
Support Hook

123187327
704-122080-904-0: RNCC: 3 | RNVC: 2

11 Aug 1989

5340-12-318-3850
Mounting Bracket

123183850
5600023-200256.000.0: RNCC: 2 | RNVC: 2
5600023-200256.000.0: RNCC: 3 | RNVC: 2
1271793: RNCC: 5 | RNVC: 2
22014.0.06.304.00: RNCC: 5 | RNVC: 9
22014.0.06.304.00: RNCC: 5 | RNVC: 9

10 Jul 1989

5340-12-165-7864
Door Button

121657864
2572-191330.07.0: RNCC: 2 | RNVC: 2
2572-191330.07.0: RNCC: 3 | RNVC: 2
2572-191330-07-0: RNCC: 5 | RNVC: 2
2572-191330-07-0: RNCC: 5 | RNVC: 9
2572-191330.07.0: RNCC: 5 | RNVC: 9

26 Jun 1976

5340-12-355-1082
Catch Strike

123551082
01000197: RNCC: 3 | RNVC: 2
C15-00: RNCC: 5 | RNVC: 2

9 Oct 2001

5340-12-340-4214
Spring Tension Clip

123404214
2001-098-001-51: RNCC: 3 | RNVC: 2

11 Apr 1996

5340-12-186-5859
Spring Tension Clip

121865859
C22234-A1000-C50: RNCC: 3 | RNVC: 2
C22234A1000C50: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-12-389-9699
Mechanical Stop

123899699
EFP15007-1: RNCC: 3 | RNVC: 2

19 Sep 2012

5340-12-345-6055
Access Cover

123456055
93193203: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-383-1728
Retaining Bail

123831728
T524M1510203: RNCC: 3 | RNVC: 2

22 Sep 2010

5340-12-312-9026
Dust And Moisture Seal Protective Cap

123129026
9127 1354: RNCC: 3 | RNVC: 2
0860293: RNCC: 5 | RNVC: 2

18 Feb 1988

5340-12-177-1215
Clamping Catch

121771215
602B621: RNCC: 3 | RNVC: 2
181871383: RNCC: 3 | RNVC: 2

17 Jan 1979

5340-12-092-0917

5340-12-339-0363
Dust And Moisture Seal Protective Plug

123390363
304024021: RNCC: 3 | RNVC: 2
0009875045: RNCC: 5 | RNVC: 2

29 Sep 1995

5340-12-362-4498
Loop Clamp

123624498
SCH1619: RNCC: 3 | RNVC: 2
69019: RNCC: 5 | RNVC: 2

25 Feb 2004

5340-12-135-9850

5340-12-318-9545
Loop Clamp

123189545
DIN3015-S-KP-1-G-8-PP: RNCC: 2 | RNVC: 2
HRGS1KP8PP: RNCC: 3 | RNVC: 2
RCPG-108: RNCC: 3 | RNVC: 2
3008PPH: RNCC: 3 | RNVC: 2
RCPG-108: RNCC: 5 | RNVC: 2
3008PPH: RNCC: 5 | RNVC: 2
DIN3015SKP1G-8PP: RNCC: 5 | RNVC: 2
VG95934KL1-8-PP: RNCC: 5 | RNVC: 9

28 Aug 1989

5340-12-183-9331
Manual Control Handle

121839331
333004-0382.000: RNCC: 2 | RNVC: 2
333004-0382.000: RNCC: 3 | RNVC: 2
1255-31800.002: RNCC: 5 | RNVC: 2
1255-31800.002: RNCC: 5 | RNVC: 2
1255-29.2: RNCC: 5 | RNVC: 2
333004-0382.000: RNCC: 5 | RNVC: 9
1255-31800-002: RNCC: 5 | RNVC: 9
1255-31800.002: RNCC: 5 | RNVC: 9
1255-31800-002: RNCC: 5 | RNVC: 9
1255-29-2: RNCC: 5 | RNVC: 9

3 Jun 1980

5340-12-302-2977
Angle Bracket

123022977
2300164-291623.002: RNCC: 2 | RNVC: 2
2300164-291623.002: RNCC: 3 | RNVC: 2
2300164-291623.002: RNCC: 5 | RNVC: 9
2300164-291623-002: RNCC: 5 | RNVC: 9
2300164-291623.002: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-12-166-2454
Helical Compression Spring Seat

121662454
100429-42000-13-0: RNCC: 2 | RNVC: 2
100429-42000-13-0: RNCC: 3 | RNVC: 2
100429-42000-13-0: RNCC: 5 | RNVC: 9

19 Aug 1976

5340-12-702-4217
Angle Bracket

127024217
VG95211-ML-127024217: RNCC: 2 | RNVC: 2
5.12.7205.1005.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-196-9877
Angle Bracket

121969877
A-230129-065: RNCC: 3 | RNVC: 2
A230129-065: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-328-4637
Webbing Strap

123284637
2300354-949900.007: RNCC: 2 | RNVC: 2
70701-150080-00: RNCC: 5 | RNVC: 2
70701-150080-00: RNCC: 5 | RNVC: 9

21 May 1992

5340-12-356-0876
Mending Plate

123560876
J92220539-003: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-316-7944
Mounting Bracket

123167944
5803471-201321.00: RNCC: 2 | RNVC: 2
65.7789.425.00-A001: RNCC: 3 | RNVC: 2

14 Feb 1989

5340-12-153-6050
Nut And Bolt Locking Plate

121536050
100355-114500.05: RNCC: 2 | RNVC: 2
100355-114500-05: RNCC: 5 | RNVC: 9
100355-114500.05: RNCC: 5 | RNVC: 9
100355-114500-05: RNCC: 5 | RNVC: 9
100355-114500.05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5517
Mounting Plate

127025517
VG95211-ML-127025517: RNCC: 2 | RNVC: 2
5.51.7220.0029.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-5576
Mounting Plate

127025576
VG95211-ML-127025576: RNCC: 2 | RNVC: 2
5.51.7240.0410.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-310-9073
Loop Clamp

123109073
RSGU0.3X16/15: RNCC: 3 | RNVC: 2
04209315016: RNCC: 5 | RNVC: 2
4209315016: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-12-364-7776
Strap Fastener Loop

123647776
2339-180121A03B: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-301-5196
Rod End Clevis

123015196
LN29607-B6: RNCC: 2 | RNVC: 2
B6LN29607: RNCC: 5 | RNVC: 2
LN29607B6: RNCC: 5 | RNVC: 2

20 Oct 1984

5340-12-312-5443
Mending Plate

123125443
4200081-151300.002: RNCC: 3 | RNVC: 2
4200081-151300.002: RNCC: 5 | RNVC: 9
4200081-151300.002: RNCC: 5 | RNVC: 9
9844884: RNCC: 5 | RNVC: 9

15 Jan 1988

5340-12-313-1379
Snap Hook

123131379
226S-100X10 VERZINKT: RNCC: 3 | RNVC: 9
226S-100-10: RNCC: 5 | RNVC: 9

5 Mar 1988

5340-12-189-7683
Handwheel

121897683
VG85082-C-100X9-RG: RNCC: 2 | RNVC: 2
VG85082-C-100X9-RG: RNCC: 3 | RNVC: 2
VG85082-C-100X9-RG: RNCC: 3 | RNVC: 2
VG85082-C-100X9-RG: RNCC: 3 | RNVC: 9
C100X9VG85083-RG5: RNCC: 5 | RNVC: 9
C100X9VG85083RG5: RNCC: 5 | RNVC: 9
C100X9VG85083GCUSN5ZNPB: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-386-4680
Spacing Threaded Standoff

123864680
009-221.600-020: RNCC: 3 | RNVC: 2

5 Sep 2011

5340-12-150-3342
Angle Bracket

121503342
C20170-A82-C81: RNCC: 3 | RNVC: 2
C20170A82C81: RNCC: 5 | RNVC: 2
TGRPL82T81: RNCC: 5 | RNVC: 9
TFS72-33081: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-2488
Mounting Plate

127022488
VG95211-ML-127022488: RNCC: 2 | RNVC: 2
30.8700.01.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-325-8848
Webbing Strap

123258848
79017/026-0600-0300: RNCC: 3 | RNVC: 2
79017/026-0600-0300: RNCC: 5 | RNVC: 9

18 Jul 1991

5340-12-180-3122
Bow Handle

121803122
582K0198: RNCC: 3 | RNVC: 2
1237083EY8935-12: RNCC: 5 | RNVC: 2
01237083: RNCC: 5 | RNVC: 2
N92065R: RNCC: 5 | RNVC: 2

5 Sep 1979

5340-12-181-2006
Retaining Strap

121812006
44-25584: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-12-702-1731
Mounting Bracket

127021731
VG95211-ML-127021731: RNCC: 2 | RNVC: 2
30.7200.1141: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-340-6528
Mounting Bracket

123406528
8854 101-111: RNCC: 3 | RNVC: 2

18 May 1996

5340-12-327-8236
Mending Plate

123278236
C42080-A34-C56: RNCC: 2 | RNVC: 2
C42080-A34-C56: RNCC: 3 | RNVC: 2

10 Mar 1992

5340-12-312-5898
Mending Plate

123125898
615.06-05-00-00-007: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-391-8738
Casement Fastener

123918738
1000-U665: RNCC: 3 | RNVC: 2
MV10-01-12-00-00: RNCC: 5 | RNVC: 2
1000-U665: RNCC: 5 | RNVC: 2

15 Apr 2013

5340-12-356-3266
Snap Hook

123563266
20.11.00/0080: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-12-378-7172
Dust And Moisture Seal Protective Cap

123787172
81.45905-0197: RNCC: 3 | RNVC: 2
PTGX900011: RNCC: 5 | RNVC: 2

6 May 2009

5340-12-183-8671
Resilient Mount

121838671
HH110-002ITEM73: RNCC: 3 | RNVC: 2

29 May 1980

5340-12-702-1685
Mounting Plate

127021685
VG95211-ML-127021685: RNCC: 2 | RNVC: 2
30.7101.150: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-312-5912
Mending Plate

123125912
615.06-04-00-00-019: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-329-5832
Mending Plate

123295832
4112845: RNCC: 3 | RNVC: 2
5092-156: RNCC: 5 | RNVC: 2
L07C.T14.01.00.008: RNCC: 5 | RNVC: 2
5092-156: RNCC: 5 | RNVC: 2

3 Sep 1992

5340-12-151-0716
Mending Plate

121510716
5800359-020191-05: RNCC: 3 | RNVC: 2
5800359-020191-05: RNCC: 5 | RNVC: 9
5800359-020191.05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-329-9078
Webbing Strap

123299078
5802016-120000.05: RNCC: 2 | RNVC: 2
5802016-120000.05: RNCC: 5 | RNVC: 9

10 Oct 1992

5340-12-320-8710
Split Tubular Clip

123208710
0210 1007: RNCC: 3 | RNVC: 2
89233096: RNCC: 5 | RNVC: 2
02101007ED0150-01: RNCC: 5 | RNVC: 2
210-1007: RNCC: 5 | RNVC: 9

28 Feb 1990

5340-12-334-6437
Mending Plate

123346437
5803555-201100.07: RNCC: 2 | RNVC: 2
5803555-201100.07: RNCC: 3 | RNVC: 2
65.7789.933.07: RNCC: 5 | RNVC: 2

6 Jun 1994

5340-12-319-3260
Angle Bracket

123193260
2654-332300.01: RNCC: 2 | RNVC: 2
2654-332300.01: RNCC: 3 | RNVC: 2
2654-332 300.01: RNCC: 5 | RNVC: 9
679-02020000.01: RNCC: 5 | RNVC: 9
679-02020000.01: RNCC: 5 | RNVC: 9

25 Sep 1989

5340-12-356-0078
Clamping Catch Fastener

123560078
0.0.356.35: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-12-352-4961
Retaining Strap

123524961
521910-820351.000.0: RNCC: 2 | RNVC: 2
521910-820351.000.0: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-12-307-0175
Double Angle Bracket

123070175
1640.0: RNCC: 3 | RNVC: 2

29 Apr 1986

5340-12-382-5875
Loop Clamp

123825875
1000830-5: RNCC: 3 | RNVC: 2
1000830-5: RNCC: 5 | RNVC: 2

13 Jul 2010

5340-12-322-8271
Angle Bracket

123228271
54.4.257.0015: RNCC: 2 | RNVC: 2
SP07864: RNCC: 3 | RNVC: 2
54.4.257.0015: RNCC: 5 | RNVC: 9

26 Sep 1990

5340-12-339-7847
Rod End Connector

123397847
2300232-992051.004.0: RNCC: 2 | RNVC: 2
2300232-992051.004.0: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-12-198-5828
Metal Runner

121985828
5802017-701200.00: RNCC: 2 | RNVC: 2
5802017-701200.00: RNCC: 3 | RNVC: 2
5802017-701200.00: RNCC: 3 | RNVC: 2
5802017-701200.00: RNCC: 5 | RNVC: 9
5802017-701200.00: RNCC: 5 | RNVC: 9

14 Feb 1984

5340-12-181-8033
Spring Tension Clip

121818033
VSN1475: RNCC: 3 | RNVC: 2
0029887878: RNCC: 5 | RNVC: 2

17 Dec 1979

5340-12-341-3045
Spacing Threaded Standoff

123413045
2386666: RNCC: 3 | RNVC: 2
2386.666: RNCC: 5 | RNVC: 2
97 E 7.432.05-9: RNCC: 5 | RNVC: 2

22 Aug 1996

5340-12-326-9522
Hinge Torsion Bar

123269522
2300232-971410.001.0: RNCC: 2 | RNVC: 2
2300232-971410.001.0: RNCC: 3 | RNVC: 2

13 Nov 1991

5340-12-319-4691
Angle Bracket

123194691
5802006-201212.03: RNCC: 2 | RNVC: 2
5802006-201212.03: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-302-8428
Rigid Caster

123028428
6600117-450000.00: RNCC: 2 | RNVC: 2
6600117-450000.00: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-318-6107
Angle Bracket

123186107
0336 2053: RNCC: 3 | RNVC: 2
03362053: RNCC: 5 | RNVC: 2
3362053KZ0146-39: RNCC: 5 | RNVC: 2
E0146-39-98.10: RNCC: 5 | RNVC: 2

1 Aug 1989

5340-12-318-7823
Access Cover

123187823
C195-A110-C102: RNCC: 3 | RNVC: 2

16 Aug 1989

5340-12-701-3273
Rod End Connector

127013273
VG95211-ML-127013273: RNCC: 2 | RNVC: 2
5.12.5102.0090.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-332-1482
Mounting Bracket

123321482
480-7347-12-17-00: RNCC: 3 | RNVC: 2
480/7347-12-17-00: RNCC: 5 | RNVC: 2

22 Jul 1993

5340-12-176-2789
Webbing Strap

121762789
23290-151069: RNCC: 2 | RNVC: 2
23290-151069: RNCC: 3 | RNVC: 2
983 235-257: RNCC: 3 | RNVC: 2
23290-151069: RNCC: 3 | RNVC: 9
23290-151069: RNCC: 5 | RNVC: 2
23290-151069: RNCC: 5 | RNVC: 9
23290-151069: RNCC: 5 | RNVC: 9
000-B2-25X2,5X450-BW-RAL6031: RNCC: 6 | RNVC: 9

23 Nov 1978

5340-12-176-3266
Loop Clamp

121763266
PAN4263-28: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-328-9085
Loop Clamp

123289085
DIN3016-1-A2-5-5X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A2-5-5X15-W1-2: RNCC: 3 | RNVC: 2
RS1.2X5/15-W1: RNCC: 3 | RNVC: 2
RS1.2X5/15: RNCC: 5 | RNVC: 2
DIN3016-A2-5-5X15-W1-2: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-330-0913
Butt Hinge

123300913
1079-U2: RNCC: 3 | RNVC: 2
224-9001: RNCC: 3 | RNVC: 2

31 Oct 1992

5340-12-121-0368
Nonmetallic Bumper

121210368
DIN95364-D50X22-M10X33-CR55ST: RNCC: 2 | RNVC: 2
81960200021: RNCC: 5 | RNVC: 2
551006-M10X33-CR55.ST: RNCC: 5 | RNVC: 2
00.02361-6037: RNCC: 5 | RNVC: 9
00023616037: RNCC: 5 | RNVC: 9
VG95364-D50X22-M10X33-CR55ST: RNCC: 5 | RNVC: 9
23230-172439-001-0: RNCC: 5 | RNVC: 9
23230-172439.001.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5437
Mounting Plate

127025437
VG95211-ML-127025437: RNCC: 2 | RNVC: 2
5.51.7210.1010.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-302-4740
Ball Socket Seat

123024740
556-372070.060: RNCC: 3 | RNVC: 2
556-372070-060: RNCC: 5 | RNVC: 2

4 Jan 1985

5340-12-308-8708
Mending Plate

123088708
1281/15071.05: RNCC: 2 | RNVC: 2
087-03/60375: RNCC: 3 | RNVC: 2
087-03/60375: RNCC: 5 | RNVC: 9

25 Nov 1986

5340-12-383-9904
Mounting Bracket

123839904
V6560-06878-041: RNCC: 3 | RNVC: 2

6 Jan 2011

5340-12-335-0530
Nonmetallic Bumper

123350530
65-7058-131-000: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-12-318-3085
Mounting Plate

123183085
287-809-140-380: RNCC: 3 | RNVC: 2
28.07.809-140.38: RNCC: 5 | RNVC: 2

29 Jun 1989

5340-12-348-6531
Metallic Solid Wheel

123486531
306325: RNCC: 3 | RNVC: 2
467-401/5281-02-00-31: RNCC: 5 | RNVC: 9
5281-02-00-31: RNCC: 5 | RNVC: 9

29 Jul 1999

5340-12-197-9948
Angle Bracket

121979948
P-244230-752: RNCC: 3 | RNVC: 2
P244230-752: RNCC: 5 | RNVC: 2

8 Dec 1983

5340-12-308-9389
Case Corner

123089389
P-244714-754: RNCC: 3 | RNVC: 2
P244714-754: RNCC: 5 | RNVC: 2

28 Nov 1986

5340-12-317-1665
Flare Lock Fastener

123171665
C249-A11-C40: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-12-158-1211
Spring Tension Clip

121581211
431271205240: RNCC: 3 | RNVC: 2
5800357-223000-05: RNCC: 5 | RNVC: 9
5800357-223000.05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-390-0789
Bumper

123900789
DF 407 677 A: RNCC: 3 | RNVC: 2
DF 407 677 A: RNCC: 5 | RNVC: 2

1 Oct 2012

5340-12-326-9668
Access Cover

123269668
P.FK01.5000.01: RNCC: 3 | RNVC: 2

14 Nov 1991

5340-12-349-4536
Dust And Moisture Seal Protective Cap

123494536
12 31 2 306 324: RNCC: 3 | RNVC: 2

17 Nov 1999

5340-12-319-6738
Loop Clamp

123196738
2300264-262600.02.0: RNCC: 2 | RNVC: 2
2300264-262600.02.0: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-12-701-6222
Mounting Bracket

127016222
5.12.7020.1620.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-0372
Spring Tension Clip

121960372
01610 T 501 35: RNCC: 3 | RNVC: 2
01610T50135: RNCC: 5 | RNVC: 2

18 May 1983

5340-12-123-4573
Retaining Strap

121234573
81974010061: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-182-2529
Door Handle

121822529
5800144: RNCC: 3 | RNVC: 2

21 Jan 1980

5340-12-190-5658
Retaining Band

121905658
8409267: RNCC: 3 | RNVC: 2
1603-312: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-145-9282

5340-12-185-0002
Platte

121850002
F01-211161-03-0: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-12-195-1618
Bail Handle

121951618
5801995-190332.00.0: RNCC: 3 | RNVC: 2
5801995-190332.00.0: RNCC: 5 | RNVC: 9

19 Jan 1983

5340-12-701-1549
Mounting Bracket

127011549
VG95211-ML-127011549: RNCC: 2 | RNVC: 2
5.12.0220.1801.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2868
Loop Clamp

127012868
VG95211-ML-127012868: RNCC: 2 | RNVC: 2
5.12.5101.2090.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-1900
Mounting Bracket

127011900
VG95211-ML-127011900: RNCC: 2 | RNVC: 2
5.12.0430.4151.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-317-8429
Butt Hinge Leaf

123178429
1000192-01 4 41200: RNCC: 2 | RNVC: 2
1000192-01 4 41200: RNCC: 3 | RNVC: 2
1000192-01 4 41200: RNCC: 5 | RNVC: 9

19 May 1989

5340-12-171-1197
Loop Clamp

121711197
DIN71555-90,5-PHOSPHATIERT: RNCC: 2 | RNVC: 2
DIN71555-90,5-PHOSPHATIERT: RNCC: 3 | RNVC: 2
DIN71555-90-5PHOSPHATIERT: RNCC: 5 | RNVC: 2
DIN71555-90-5PHOSPHATIERT: RNCC: 5 | RNVC: 2
06.67041.0123: RNCC: 5 | RNVC: 2
06670410123: RNCC: 5 | RNVC: 2
90-5DIN71555PH0SPHATIERT: RNCC: 5 | RNVC: 2
DIN71555-90-5PH0SPHATIERT: RNCC: 5 | RNVC: 2

9 Sep 1977

5340-12-196-5445
Nonmetallic Bumper

121965445
DIN95364-B25X18,5-NR55ST: RNCC: 2 | RNVC: 2
20292/S-SM550: RNCC: 5 | RNVC: 2
20292/S,NR55ST: RNCC: 5 | RNVC: 2
1.25.18,5.4B.55NR/ST: RNCC: 5 | RNVC: 2
83605-25X18,5-M6X16.NR55.ST: RNCC: 5 | RNVC: 2
20292/S-BSTN5590: RNCC: 5 | RNVC: 2
20292S: RNCC: 5 | RNVC: 9
VG95364-B25X18,5-NR55: RNCC: 5 | RNVC: 9
VG95364-B25X18,5-NR55ST: RNCC: 5 | RNVC: 9
20292/S-SM550: RNCC: 5 | RNVC: 9

18 Jul 1983

5340-12-320-7533
Dust And Moisture Seal Protective Cap

123207533
4.2594-01: RNCC: 3 | RNVC: 2
81.62396.0008: RNCC: 5 | RNVC: 2

13 Feb 1990

5340-12-316-0088
Mending Plate

123160088
P-M65261-001: RNCC: 3 | RNVC: 2
PM65261-001: RNCC: 5 | RNVC: 2

14 Dec 1988

5340-12-312-0349
Bow Handle

123120349
VG95149A120-M4-AL-SW: RNCC: 2 | RNVC: 2
2829010446: RNCC: 3 | RNVC: 2

12 Nov 1987

5340-12-701-4740
Mounting Plate

127014740
VG95211-ML-127014740: RNCC: 2 | RNVC: 2
5.12.5805.0110.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-5288
Loop Clamp

127015288
VG95211-ML-127015288: RNCC: 2 | RNVC: 2
5.12.6105.0040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-385-6597
Magnetic Catch

123856597
MAG-03000ALS-D: RNCC: 3 | RNVC: 1

28 Jun 2011

5340-12-701-1550
Mounting Bracket

127011550
VG95211-ML-127011550: RNCC: 2 | RNVC: 2
5.12.0220.1801.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-339-7406
Seal Retaining Plate

123397406
2500255-000000.008.0: RNCC: 2 | RNVC: 2
2500255-000000.008.0: RNCC: 3 | RNVC: 2

9 Jan 1996

5340-12-342-6935
Helical Compression Spring Seat

123426935
06-321C .5NPT POS-084: RNCC: 3 | RNVC: 2
06-321C 1/2NPT POS-084: RNCC: 5 | RNVC: 2

18 Mar 1997

5340-12-326-4415
Electrical-Mechanical Equipment Post

123264415
DN02.019-VERZINKT: RNCC: 3 | RNVC: 2
DN02-019: RNCC: 5 | RNVC: 2
DN02.019: RNCC: 5 | RNVC: 2

16 Sep 1991

5340-12-319-4154
Strap Fastener Loop

123194154
C122-A11-C20: RNCC: 3 | RNVC: 2

29 Sep 1989

5340-12-377-5182
Bumper

123775182
21.8454-88-11-10.00-04: RNCC: 3 | RNVC: 2
1050392: RNCC: 5 | RNVC: 2

21 Jan 2009

5340-12-361-0509
Multiple Angle Bracket

123610509
J21520037-401: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-12-340-1676
Lock-Release Lever

123401676
6600084-110420: RNCC: 2 | RNVC: 2
5649 09 13: RNCC: 3 | RNVC: 2

9 Mar 1996

5340-12-152-3265
Bow Handle

121523265
VG95149A70X20MS58-CR: RNCC: 2 | RNVC: 2
52-1246-001-05: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-328-5713
Clamp Bolt Assembly

123285713
S3SD18105-4: RNCC: 3 | RNVC: 2
S3SD18105-4: RNCC: 5 | RNVC: 2

3 Jun 1992

5340-12-312-4568
Butt Hinge Leaf

123124568
1 76 216: RNCC: 3 | RNVC: 9
176216: RNCC: 3 | RNVC: 9

8 Jan 1988

5340-12-319-4655
Access Cover

123194655
2782-363000.000.0: RNCC: 2 | RNVC: 2
2782-363000.000.0: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-357-2101
Access Cover

123572101
8811860204: RNCC: 3 | RNVC: 2

22 May 2002

5340-12-193-1550
Shimmy Damper

121931550
17 48 006 001: RNCC: 3 | RNVC: 2
0004630665: RNCC: 5 | RNVC: 2
1748006001: RNCC: 5 | RNVC: 2

28 Jun 1982

5340-12-371-6422
Dust And Moisture Seal Protective Plug

123716422
2136319: RNCC: 3 | RNVC: 2
7KK307: RNCC: 5 | RNVC: 2

2 May 2007

5340-12-161-0454
Rod End Clevis

121610454
160-25312-61: RNCC: 3 | RNVC: 2
160-25312-61: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-189-0997
Retaining Strap

121890997
81907100010: RNCC: 3 | RNVC: 2
5000279056: RNCC: 5 | RNVC: 2
81.90710.0010: RNCC: 5 | RNVC: 2
5000279056: RNCC: 5 | RNVC: 9

27 Aug 1981

5340-12-392-8715
Dust And Moisture Seal Protective Plug

123928715
L134M2803210: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-12-316-4714
Mounting Bracket

123164714
54.0026.280.00: RNCC: 3 | RNVC: 2
54002628000: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-364-4497
Mounting Plate

123644497
54.1107.503.09: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-364-1999
Metal Grille

123641999
64415047: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-319-7789
Dust And Moisture Seal Protective Cap

123197789
6060 301 162: RNCC: 3 | RNVC: 2
6060301162: RNCC: 5 | RNVC: 2
606060301162: RNCC: 5 | RNVC: 2
91109376: RNCC: 5 | RNVC: 2
6060301162: RNCC: 5 | RNVC: 9

3 Nov 1989

5340-12-316-1558
Mounting Bracket

123161558
0039884978: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-375-1196
Angle Bracket

123751196
948973077: RNCC: 3 | RNVC: 2

23 Apr 2008

5340-12-043-3392

5340-12-132-2017

5340-12-316-2927
Butt Hinge Leaf

123162927
4085705: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-328-3749
Metallic Solid Wheel

123283749
S3194: RNCC: 3 | RNVC: 2

12 May 1992

5340-12-377-5955
Hand Crank

123775955
BHAA038: RNCC: 3 | RNVC: 2

28 Jan 2009

5340-12-317-2986
Double Angle Bracket

123172986
3228350012: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-349-8636
Turnbuckle Body

123498636
D-WZ1183: RNCC: 3 | RNVC: 2
DWZ1183: RNCC: 5 | RNVC: 2

18 Jan 2000

5340-12-135-6692

5340-12-092-3463

5340-12-314-0179
Mounting Bracket

123140179
S05-101162.01: RNCC: 3 | RNVC: 2

31 May 1988

5340-12-301-1962
Angle Bracket

123011962
1423-911.28(4): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-347-0245
Access Cover

123470245
CF 359 281 A: RNCC: 2 | RNVC: 2
CF 359 281 A: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-12-343-8095
Mending Plate

123438095
25704-289810.07.0: RNCC: 2 | RNVC: 2
414015.4630: RNCC: 3 | RNVC: 2
414015.4630: RNCC: 5 | RNVC: 9

30 Jul 1997

5340-12-301-5168
Metal Runner

123015168
1000163-371040.005.0: RNCC: 2 | RNVC: 2
1000163-371040.005.0: RNCC: 3 | RNVC: 2

20 Oct 1984

5340-12-185-6548
Webbing Strap

121856548
5801481-0830: RNCC: 2 | RNVC: 2
5801481-0830: RNCC: 3 | RNVC: 2
5801481-0830: RNCC: 5 | RNVC: 9
5801481-0830: RNCC: 5 | RNVC: 9

23 Oct 1980

5340-12-338-7250
Angle Bracket

123387250
2300013-3220.02: RNCC: 2 | RNVC: 2
7900621-00200.02: RNCC: 3 | RNVC: 2
2300013-3220.02: RNCC: 5 | RNVC: 2
2300013-3220.02: RNCC: 5 | RNVC: 9
9911187: RNCC: 5 | RNVC: 9

21 Aug 1995

5340-12-159-9371
Resilient Mount

121599371
VG95446T05H004Z: RNCC: 2 | RNVC: 2
56035002: RNCC: 3 | RNVC: 2
C42165-A16-C21: RNCC: 5 | RNVC: 2
313039: RNCC: 5 | RNVC: 2
37G17-0045-06.001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-307-4150
Double Angle Bracket

123074150
2300041-180220.05: RNCC: 2 | RNVC: 2
790-52.20.115-02: RNCC: 5 | RNVC: 2
2300041-180220.05: RNCC: 5 | RNVC: 9

13 Jun 1986

5340-12-326-6883
Lock-Release Lever

123266883
1107U1/U6-1109U6/1000U49/1001U12: RNCC: 3 | RNVC: 2
207-9001-9528-20 0-9601-3602: RNCC: 3 | RNVC: 2
1107-U1/U6+1109-U6/1000-U49/1001: RNCC: 5 | RNVC: 2
0745231237: RNCC: 5 | RNVC: 2

22 Oct 1991

5340-12-315-7136
Gummi- Riemen

123157136
81669506006: RNCC: 3 | RNVC: 2
846-81.66950.6006: RNCC: 5 | RNVC: 2
81.66950.6006: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-388-9828
Mending Plate

123889828
SK1232-184020.001.0: RNCC: 3 | RNVC: 2

11 May 2012

5340-12-195-2421
Spring Tension Clip

121952421
1004000005-002: RNCC: 3 | RNVC: 2
5SXN04R: RNCC: 5 | RNVC: 2
5SXN04R: RNCC: 5 | RNVC: 2
518545: RNCC: 5 | RNVC: 2
5ESN04R: RNCC: 5 | RNVC: 2
5SXN04R: RNCC: 5 | RNVC: 2

27 Jan 1983

5340-12-702-5992
Loop Clamp

127025992
VG95211-ML-127025992: RNCC: 2 | RNVC: 2
5149A-48: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-361-4284
Double Angle Bracket

123614284
51192400033: RNCC: 3 | RNVC: 2
51.19240-0033: RNCC: 5 | RNVC: 2

29 Sep 2003

5340-12-315-3676
Nonmetallic Bumper

123153676
86015757: RNCC: 3 | RNVC: 2
5516010800: RNCC: 5 | RNVC: 2
86015757EC5058-04: RNCC: 5 | RNVC: 2

15 Oct 1988

5340-12-171-9339
Resilient Mount

121719339
E132-05001: RNCC: 3 | RNVC: 2
845-E132-05001: RNCC: 5 | RNVC: 2

5 Dec 1977

5340-12-368-7297
Access Cover

123687297
311800: RNCC: 3 | RNVC: 2
0855-02-10-00/35: RNCC: 5 | RNVC: 2

11 Apr 2006

5340-12-166-4670
Retaining Strap

121664670
DIN72573-3X4-ST-ZN: RNCC: 2 | RNVC: 2
DIN72573-3X4-ST-ZN: RNCC: 3 | RNVC: 2
72573021-97: RNCC: 5 | RNVC: 9
3X4DIN72573ST: RNCC: 5 | RNVC: 9
DIN72573-3X4-ST: RNCC: 5 | RNVC: 9
20674: RNCC: 5 | RNVC: 9
DIN72573-3X4-ST: RNCC: 5 | RNVC: 9

9 Sep 1976

5340-12-361-4620
Angle Bracket

123614620
55940-400: RNCC: 3 | RNVC: 2

6 Oct 2003

5340-12-195-0249
Angle Bracket

121950249
015-8755-000: RNCC: 3 | RNVC: 2
7561 147752: RNCC: 5 | RNVC: 9
7561147752: RNCC: 5 | RNVC: 9

3 Jan 1983

5340-12-328-3907
Access Cover

123283907
2653-185500.00: RNCC: 2 | RNVC: 2
2653-185500.00: RNCC: 3 | RNVC: 2

14 May 1992

5340-12-344-9906
Webbing Strap

123449906
58R137-13192: RNCC: 2 | RNVC: 2
58R137-13192: RNCC: 3 | RNVC: 2

20 Jan 1998

5340-12-701-4095
Retaining Bail

127014095
VG95211-ML-127014095: RNCC: 2 | RNVC: 2
5.12.5311.8350.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-301-0049
Angle Bracket

123010049
P-296895-009: RNCC: 3 | RNVC: 2
P296895-009: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-185-0000
Platte

121850000
F01-211160-06-0: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-12-355-9406
Retaining Strap

123559406
2/1G8-18MMN325: RNCC: 3 | RNVC: 2

8 Jan 2002

5340-12-359-4385
Loop Clamp

123594385
DIN3016-1-D1-25X20-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-198-4277
Double Angle Bracket

121984277
5801758-2300-01: RNCC: 2 | RNVC: 2
5801758-2300.01: RNCC: 3 | RNVC: 2
5801758-2300.01: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-391-3560
Buckle

123913560
HB-002: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-12-343-4362
Webbing Strap

123434362
5803676-201132.00: RNCC: 2 | RNVC: 2
5803676-201132.00: RNCC: 3 | RNVC: 2
7801251365: RNCC: 5 | RNVC: 2
78012 51365: RNCC: 5 | RNVC: 9

20 Jun 1997

5340-12-350-7240
Access Cover

123507240
KE57060-32: RNCC: 3 | RNVC: 2

10 May 2000

5340-12-196-6712
Electrical-Mechanical Equipment Post

121966712
ESK2000-3: RNCC: 3 | RNVC: 2

1 Aug 1983

5340-12-313-7915
Clamping Catch

123137915
604: RNCC: 3 | RNVC: 2
6.020.073.00: RNCC: 5 | RNVC: 2
0310075: RNCC: 5 | RNVC: 2

5 May 1988

5340-12-175-6266
Door Button

121756266
CU 402 588 B: RNCC: 2 | RNVC: 2
CU 402 588 B: RNCC: 3 | RNVC: 2
CU402588B: RNCC: 5 | RNVC: 2
CU 402 588 B: RNCC: 5 | RNVC: 2
CU402588B: RNCC: 5 | RNVC: 2
CU 402 588 B: RNCC: 5 | RNVC: 2
CU402588B: RNCC: 5 | RNVC: 2

10 Oct 1978

5340-12-380-0006
Access Cover

123800006
120D182046.000.0: RNCC: 2 | RNVC: 2
120D182046.000.0: RNCC: 3 | RNVC: 2

17 Sep 2009

5340-12-331-8306
Loop Clamp

123318306
HBD.A7.060.0020.0XV441: RNCC: 3 | RNVC: 2
HBD A7 060 0020 0 XV441: RNCC: 5 | RNVC: 2

24 Jun 1993

5340-12-320-7041
Dust And Moisture Seal Protective Plug

123207041
CF 493 116 A: RNCC: 2 | RNVC: 2
CF 493 116 A: RNCC: 3 | RNVC: 2
CF 493 116 A: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-161-2438
Rod End Connector

121612438
160-73617-10: RNCC: 3 | RNVC: 2
160-73617-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-347-0174
Retaining Clip

123470174
01522: RNCC: 3 | RNVC: 2
S90-800.03: RNCC: 5 | RNVC: 2

12 Oct 1998

5340-12-384-6110
Lock-Release Lever

123846110
GN300-78-M8-20-RH: RNCC: 3 | RNVC: 2

11 Mar 2011

5340-12-191-5154
Retaining Strap

121915154
C22451-A1000-C36: RNCC: 3 | RNVC: 2
C22451A1000C36: RNCC: 5 | RNVC: 2

8 Feb 1982

5340-12-363-9091
Mounting Bracket

123639091
J29120457-001: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-348-9603
Mounting Plate

123489603
245/7383-02-00-29: RNCC: 3 | RNVC: 2

7 Sep 1999

5340-12-160-0456
Nonmetallic Bumper

121600456
100324-1000.09: RNCC: 2 | RNVC: 2
81280-100324-1000.09: RNCC: 3 | RNVC: 2
100324-1000.09: RNCC: 5 | RNVC: 2
100324-1000-09: RNCC: 5 | RNVC: 9
100324-1000.09: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-336-0428
Multiple Angle Bracket

123360428
160-89028-01: RNCC: 3 | RNVC: 2
160-89028-01: RNCC: 5 | RNVC: 9

14 Oct 1994

5340-12-189-1828
Angle Bracket

121891828
23111-3389.00: RNCC: 2 | RNVC: 2
23111-3389.00: RNCC: 3 | RNVC: 2
1119492: RNCC: 5 | RNVC: 9
23111-3389-00: RNCC: 5 | RNVC: 9
23111-3389.00: RNCC: 5 | RNVC: 9

9 Sep 1981

5340-12-338-8004
Angle Bracket

123388004
6700017-620210.01: RNCC: 2 | RNVC: 2
6700017-620210.01: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-349-8934
Retaining Strap

123498934
VG95211-ML-123498934: RNCC: 2 | RNVC: 2
T214M1002101: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-189-6554
Nonmetallic Bumper

121896554
14-026: RNCC: 3 | RNVC: 2

12 Oct 1981

5340-12-145-4385
Webbing Strap

121454385
100071-0222: RNCC: 2 | RNVC: 2
100071-0222: RNCC: 5 | RNVC: 9
000-A3-25X3,0X1965-BW-RAL6031: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-188-3271
Bail Handle

121883271
273.1: RNCC: 3 | RNVC: 2
2070-9120-11-00: RNCC: 3 | RNVC: 2
273-1: RNCC: 5 | RNVC: 2
63270041: RNCC: 5 | RNVC: 2
308-120-1: RNCC: 5 | RNVC: 2
273-1: RNCC: 5 | RNVC: 2
370-9120-11-00: RNCC: 5 | RNVC: 2
3270/041: RNCC: 5 | RNVC: 2
3270/041: RNCC: 5 | RNVC: 9

30 Jun 1981

5340-12-165-9781
Rod End Clevis

121659781
100429-50000-09-0: RNCC: 2 | RNVC: 2
100429-50000-09-0: RNCC: 5 | RNVC: 2

24 Jul 1976

5340-12-701-6796
Angle Bracket

127016796
VG95211-ML-127016796: RNCC: 2 | RNVC: 2
5.12.7213.8005.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-9876
Angle Bracket

121969876
A-230129-057: RNCC: 3 | RNVC: 2
A230129-057: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-329-7948
Container Adapter

123297948
40412-031: RNCC: 2 | RNVC: 2
40412-031: RNCC: 3 | RNVC: 2
M-LAL-141000-40412-031: RNCC: 5 | RNVC: 2
40412-031: RNCC: 5 | RNVC: 9
M-LAL-141000-40412-031: RNCC: 5 | RNVC: 9

30 Sep 1992

5340-12-701-7846
Mounting Bracket

127017846
VG95211-ML-127017846: RNCC: 2 | RNVC: 2
5.12.7802.8010.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-179-1198
Resilient Mount

121791198
DIN95363-B50X30-NR55ST: RNCC: 2 | RNVC: 2
1.50.30.3.55NR/ST: RNCC: 5 | RNVC: 2
1.50.30.3.55NRST: RNCC: 5 | RNVC: 2
811.010.050.030.10X25.NR55.ST: RNCC: 5 | RNVC: 2
81110-50X30-M10X25.NR55.ST: RNCC: 5 | RNVC: 2
50-30-200-55SHORE: RNCC: 5 | RNVC: 2
VRE213-30B: RNCC: 5 | RNVC: 2
VRE213-30B: RNCC: 5 | RNVC: 9
VG95363-B50X30-NR55ST: RNCC: 5 | RNVC: 9
VG95363B50X30NR55ST: RNCC: 5 | RNVC: 9

6 Jun 1979

5340-12-154-6824
Dust And Moisture Seal Protective Plug

121546824
7.34.6-16.30.11-15: RNCC: 3 | RNVC: 2
7-34-6-16-30-11-15: RNCC: 5 | RNVC: 2
109232-163011-15: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-184-1409
Mending Plate

121841409
333004-1008.000: RNCC: 2 | RNVC: 2
333004-1008.000: RNCC: 3 | RNVC: 2
1255-10000.008: RNCC: 5 | RNVC: 2
1255-01-9: RNCC: 5 | RNVC: 9
1255-01.9: RNCC: 5 | RNVC: 9
1255-10000-008: RNCC: 5 | RNVC: 9
1255-10000.008: RNCC: 5 | RNVC: 9
333004-1008.000: RNCC: 5 | RNVC: 9
1255-10000-008: RNCC: 5 | RNVC: 9
1255-10000.008: RNCC: 5 | RNVC: 9

28 Jun 1980

5340-12-317-6989
Mounting Bracket

123176989
3522500243: RNCC: 3 | RNVC: 2
352-250-0243: RNCC: 5 | RNVC: 2

2 May 1989

5340-12-304-2791
Access Hole Frame

123042791
47-1156-000200.009.0: RNCC: 2 | RNVC: 2
47-1156-000200.009.0: RNCC: 3 | RNVC: 2

5 Jul 1985

5340-12-318-1326
Butt Hinge Leaf

123181326
704-125220-935-0: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-12-301-5859
Bridge Clamp

123015859
A-12-001-02-000: RNCC: 3 | RNVC: 2

25 Oct 1984

5340-12-188-0460
Retaining Strap

121880460
2300109-253500.000.0: RNCC: 2 | RNVC: 2
2300109-253500.000.0: RNCC: 3 | RNVC: 2
2300109-253500.000.0: RNCC: 3 | RNVC: 2
2300109-253500-000-0: RNCC: 5 | RNVC: 2
2300109-253500-000-0: RNCC: 5 | RNVC: 2
2300109-253500-000-0: RNCC: 5 | RNVC: 9
2300109-253500.000.0: RNCC: 5 | RNVC: 9

1 Jun 1981

5340-12-190-1902
Electrical-Mechanical Equipment Post

121901902
1000042-156000.04: RNCC: 3 | RNVC: 2
22800-15A: RNCC: 5 | RNVC: 2

10 Nov 1981

5340-12-349-6466
Mounting Plate

123496466
U60.100000.05-00: RNCC: 3 | RNVC: 2

14 Dec 1999

5340-12-364-4934
Dust And Moisture Seal Protective Cap

123644934
250/42,4: RNCC: 3 | RNVC: 2
GPN250/42,4: RNCC: 5 | RNVC: 2

1 Oct 2004

5340-12-362-7511
Dust And Moisture Seal Protective Cap

123627511
12.7382-95-00-31.40-00: RNCC: 3 | RNVC: 2

26 Mar 2004

5340-12-347-5778
Mechanical Stop

123475778
9897801: RNCC: 3 | RNVC: 9
463-151161.000: RNCC: 5 | RNVC: 9

11 Jan 1999

5340-12-344-4734
Angle Bracket

123444734
P-233128-409: RNCC: 3 | RNVC: 2
P233128-409: RNCC: 5 | RNVC: 2

30 Oct 1997

5340-12-329-5713
Mounting Plate

123295713
7068-01000-001-2: RNCC: 3 | RNVC: 2

2 Sep 1992

5340-12-348-4523
Access Cover

123484523
G10-71-891-32-0: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-12-701-6408
Angle Bracket

127016408
VG95211-ML-127016408: RNCC: 2 | RNVC: 2
5.12.7080.1420.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-8133
Angle Bracket

127018133
VG95211-ML-127018133: RNCC: 2 | RNVC: 2
5.12.9201.1003.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-177-9489
Handwheel

121779489
2579-0000.01: RNCC: 2 | RNVC: 2
114043: RNCC: 3 | RNVC: 2
2579-0000-01: RNCC: 5 | RNVC: 2
2579-0000-01: RNCC: 5 | RNVC: 9
114048: RNCC: 5 | RNVC: 9

9 Mar 1979

5340-12-183-6448
Bow Handle

121836448
VG95149B118X37GAL-FB: RNCC: 2 | RNVC: 2
C44165-A24-C422: RNCC: 3 | RNVC: 2
C44165A24C422: RNCC: 5 | RNVC: 9

6 May 1980

5340-12-321-0618
Resilient Mount

123210618
LFS12-3: RNCC: 3 | RNVC: 2
352250044835: RNCC: 5 | RNVC: 2
LFS12-3: RNCC: 5 | RNVC: 9

22 Mar 1990

5340-12-331-5293
Container Adapter

123315293
APT-1-S: RNCC: 3 | RNVC: 2

17 May 1993

5340-12-186-6754
Plain Solid Disk

121866754
4-66036: RNCC: 3 | RNVC: 2

26 Jan 1981

5340-12-319-5381
Rod End Clevis

123195381
4900059-751210.000.0/1: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-12-363-7921
Manual Control Handle

123637921
00001084095: RNCC: 3 | RNVC: 2
81658155011: RNCC: 5 | RNVC: 2

24 Jul 2004

5340-12-354-2110
Nonmetallic Bumper

123542110
1748 108 002: RNCC: 3 | RNVC: 2

20 Jun 2001

5340-12-347-0623
Access Cover

123470623
592601-9003.000: RNCC: 3 | RNVC: 2

20 Oct 1998

5340-12-356-1481
Angle Bracket

123561481
4606890512: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-346-7784
Mounting Plate

123467784
2396-292000A13B: RNCC: 3 | RNVC: 2

10 Sep 1998

5340-12-361-1055
Mounting Plate

123611055
5316909: RNCC: 3 | RNVC: 2
6503.201.10.35.000: RNCC: 5 | RNVC: 2

22 Aug 2003

5340-12-351-5043
Dust And Moisture Seal Protective Cover

123515043
4618200312: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-345-0617
Dust And Moisture Seal Protective Cap

123450617
295.17A: RNCC: 3 | RNVC: 2
5036461: RNCC: 5 | RNVC: 2
295 17A: RNCC: 5 | RNVC: 2

27 Jan 1998

5340-12-383-0667
Engine Plate

123830667
61217650108: RNCC: 3 | RNVC: 2

9 Sep 2010

5340-12-386-0449
Mounting Bracket

123860449
T622M1203121: RNCC: 3 | RNVC: 2

3 Aug 2011

Load More Results