What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 122 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 122 of 178

5340-12-701-4597
Loop Clamp

127014597
VG95211-ML-127014597: RNCC: 2 | RNVC: 2
5.12.5314.8040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-345-2091
Angle Bracket

123452091
1202 2587: RNCC: 3 | RNVC: 2
26.13541/3.4: RNCC: 5 | RNVC: 9

11 Feb 1998

5340-12-304-6438
Angle Bracket

123046438
5801841-600.000: RNCC: 2 | RNVC: 2
78001.40900: RNCC: 3 | RNVC: 2
5801841-600.000: RNCC: 5 | RNVC: 9

8 Aug 1985

5340-12-124-1236

5340-12-360-0394
Angle Bracket

123600394
9239764000: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-366-1340
Angle Bracket

123661340
S991M5066101: RNCC: 2 | RNVC: 2
S991M5066101: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-12-190-2841
Detent Plunger

121902841
450901-3062: RNCC: 3 | RNVC: 2

17 Nov 1981

5340-12-333-5819
Flush Lock

123335819
2303H-RECHTS: RNCC: 3 | RNVC: 2
GSV2303H/RH: RNCC: 5 | RNVC: 2
GSV2303Z: RNCC: 5 | RNVC: 2
GSV2303V/RIGHT HAND: RNCC: 5 | RNVC: 9

7 Jan 1994

5340-12-163-9911
Resilient Mount

121639911
331222112: RNCC: 3 | RNVC: 2
331222112: RNCC: 3 | RNVC: 2
331222112: RNCC: 5 | RNVC: 2
22112: RNCC: 5 | RNVC: 2
VG95365-A4-NR75ST-M16DURCHGEHEND: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-328-0193
Webbing Strap

123280193
40408-708: RNCC: 2 | RNVC: 2
40408-708: RNCC: 3 | RNVC: 2
40408-707: RNCC: 5 | RNVC: 2
40408-707: RNCC: 5 | RNVC: 2
ZG M-LAL-117000-40408: RNCC: 5 | RNVC: 2
ZG M-LAL-117000-40408: RNCC: 5 | RNVC: 9
40408-708: RNCC: 5 | RNVC: 9
40408-707: RNCC: 5 | RNVC: 9

31 Mar 1992

5340-12-310-6756
Butt Hinge

123106756
2300033-306600A: RNCC: 2 | RNVC: 2
2300033-306600A: RNCC: 5 | RNVC: 9
2300033-306600A: RNCC: 5 | RNVC: 9

15 Jun 1987

5340-12-136-6084

5340-12-349-6597
Strap Hinge Leaf

123496597
2940.1309: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-12-198-0435
Angle Bracket

121980435
4023R-512000.02: RNCC: 2 | RNVC: 2
7883133: RNCC: 3 | RNVC: 2
4023R-512000.02: RNCC: 5 | RNVC: 9

14 Dec 1983

5340-12-340-7311
Helical Compression Spring Seat

123407311
531.005.4: RNCC: 3 | RNVC: 2

31 May 1996

5340-12-301-7296
Mending Plate

123017296
43712165-301: RNCC: 2 | RNVC: 2
43712165-301: RNCC: 3 | RNVC: 2
43712165-301: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-310-8967
Electrical-Mechanical Equipment Post

123108967
5.03.051: RNCC: 3 | RNVC: 2

7 Jul 1987

5340-12-389-3809
Mounting Bracket

123893809
1.315-200900.00: RNCC: 2 | RNVC: 2
1.315-200900.00: RNCC: 5 | RNVC: 2

28 Jun 2012

5340-12-390-3526
Tripod Component

123903526
4100094-982215.001.0: RNCC: 2 | RNVC: 2
4100094-982215.001.0: RNCC: 3 | RNVC: 2

5 Nov 2012

5340-12-188-7757
Catch Strike

121887757
5801479-3110.01: RNCC: 2 | RNVC: 2
5801479-3110.01: RNCC: 3 | RNVC: 2
5801479-3110-01: RNCC: 5 | RNVC: 2
5801479-3110-01: RNCC: 5 | RNVC: 9
5801479-3110.01: RNCC: 5 | RNVC: 9

29 Jul 1981

5340-12-393-7711
Mounting Plate

123937711
1237792: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-168-2780
Loop Clamp

121682780
LN9491B14: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-190-0446
Retaining Strap

121900446
5D21061: RNCC: 3 | RNVC: 2
5D21061: RNCC: 5 | RNVC: 2
5D21061: RNCC: 5 | RNVC: 2

4 Nov 1981

5340-12-194-2112
Mending Plate

121942112
5549869: RNCC: 3 | RNVC: 2
554.9869: RNCC: 5 | RNVC: 2

12 Oct 1982

5340-12-348-9848
Tee Hinge

123489848
4257200137: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-330-1637
Access Cover

123301637
2451702: RNCC: 3 | RNVC: 2

10 Nov 1992

5340-12-043-3585

5340-12-358-7661
Mounting Bracket

123587661
9412607062: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-043-7002

5340-12-702-1722
Angle Bracket

127021722
VG95211-ML-127021722: RNCC: 2 | RNVC: 2
30.7143.90: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-315-2887
Casement Fastener

123152887
4676162: RNCC: 3 | RNVC: 2
5801443-140252: RNCC: 5 | RNVC: 2
5801443-140252: RNCC: 5 | RNVC: 9

11 Oct 1988

5340-12-365-6356
Angle Bracket

123656356
J92228338-001: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-197-3660
Double Angle Bracket

121973660
1202-20.30: RNCC: 2 | RNVC: 2
001-202.020-030: RNCC: 3 | RNVC: 2

17 Oct 1983

5340-12-156-3158
Helical Compression Spring Seat

121563158
1216 1087: RNCC: 3 | RNVC: 2
12161087: RNCC: 5 | RNVC: 9
6-232-0-342-001-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-375-7873
Hand Crank

123757873
03-133233/00: RNCC: 3 | RNVC: 2
03-133233/00: RNCC: 5 | RNVC: 9

3 Jul 2008

5340-12-337-9516
Mounting Plate

123379516
3650-0300-0001: RNCC: 3 | RNVC: 2
032026: RNCC: 5 | RNVC: 2
E3650-0300-0001: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-314-6975
Resilient Mount

123146975
60165003-A-M12: RNCC: 3 | RNVC: 2
E1N3340-11: RNCC: 3 | RNVC: 2
331952447: RNCC: 5 | RNVC: 2
VG95365-D4-NR-AMST: RNCC: 5 | RNVC: 9

30 Jul 1988

5340-12-386-2366
Access Cover

123862366
2500261-068010.003.0: RNCC: 2 | RNVC: 2
2500261-068010.003.0: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-12-378-9708
Snap Hook

123789708
M8055-4-8X80: RNCC: 3 | RNVC: 2

5 Jun 2009

5340-12-319-9637
Angle Bracket

123199637
852-181100.04.0: RNCC: 2 | RNVC: 2
852-181100.04.0: RNCC: 3 | RNVC: 2
852-181100.04.0: RNCC: 5 | RNVC: 9

23 Nov 1989

5340-12-152-6821
Compression Cup

121526821
80-399.035: RNCC: 3 | RNVC: 2
80-399.035: RNCC: 5 | RNVC: 2
DR5-06-04: RNCC: 5 | RNVC: 2
RM073-25-603: RNCC: 5 | RNVC: 2
80-399.035: RNCC: 5 | RNVC: 9
RM-069/25-603C AG350-0,6MM: RNCC: 5 | RNVC: 9
RM069-25: RNCC: 5 | RNVC: 9
RM073-25: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-1734
Mounting Bracket

127011734
VG95211-ML-127011734: RNCC: 2 | RNVC: 2
5.12.0246.0011.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-328-6296
Clamping Catch

123286296
E2.17.00.04/6: RNCC: 3 | RNVC: 2
2-17-00-04/6: RNCC: 5 | RNVC: 2

10 Jun 1992

5340-12-344-4626
Mounting Bracket

123444626
A-616782-002: RNCC: 3 | RNVC: 2
A616782-002: RNCC: 5 | RNVC: 2

29 Oct 1997

5340-12-195-6590
Loop Clamp

121956590
DIN3016-2-G1-154X9-W5: RNCC: 2 | RNVC: 2
DIN3016-G1-154X9-W5: RNCC: 3 | RNVC: 2
SP154/9ZY-W5: RNCC: 3 | RNVC: 2
SP154-9ZY1-4571: RNCC: 5 | RNVC: 2
SP154/9ZY-1.4571: RNCC: 5 | RNVC: 2
1210700154: RNCC: 5 | RNVC: 2
DIN3016-G1-154X9-W5: RNCC: 5 | RNVC: 9
VG95931-G154X9-1.4571: RNCC: 5 | RNVC: 9

24 Mar 1983

5340-12-359-9488
Butt Hinge

123599488
DIN7954-A80-ST-ZN: RNCC: 2 | RNVC: 2

24 Mar 2003

5340-12-313-0831
Hand Crank

123130831
P-896091-401: RNCC: 3 | RNVC: 2
P896091-401: RNCC: 5 | RNVC: 2

3 Mar 1988

5340-12-350-3631
Access Cover

123503631
105-21122.08: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-12-321-9440
Spring Tension Clip

123219440
SCB1730: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-192-7144
Flare Lock Fastener

121927144
171881449A01C: RNCC: 3 | RNVC: 2

17 May 1982

5340-12-343-7217
Mounting Bracket

123437217
WRYUG2043: RNCC: 3 | RNVC: 2

17 Jul 1997

5340-12-304-1304
Butt Hinge Leaf

123041304
LN9372BG330: RNCC: 2 | RNVC: 2

13 Jun 1985

5340-12-341-0909
Access Door Locking Ring

123410909
707222: RNCC: 3 | RNVC: 2

26 Jul 1996

5340-12-372-9177
Spring Tension Clip

123729177
L258M2074202: RNCC: 3 | RNVC: 2

6 Sep 2007

5340-12-011-5035

5340-12-025-0077

5340-12-310-5300
Bridge Clamp

123105300
78203 51156: RNCC: 2 | RNVC: 2
7820351156: RNCC: 3 | RNVC: 2
78203 51156: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-179-3008
Dust And Moisture Seal Protective Plug

121793008
3819971386: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-392-4297
Webbing Strap

123924297
2300013-4521.00: RNCC: 2 | RNVC: 2
2300013-4521.00: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-12-094-4152

5340-12-325-3969
Retaining Clip

123253969
783 9011 700 01: RNCC: 3 | RNVC: 2

3 Jun 1991

5340-12-316-1337
Webbing Strap

123161337
25784-40: RNCC: 2 | RNVC: 2

24 Dec 1988

5340-12-371-1218
Dust And Moisture Seal Protective Cap-Plug

123711218
353 7161-801: RNCC: 3 | RNVC: 2
353 7161-801: RNCC: 5 | RNVC: 2

14 Feb 2007

5340-12-385-8210
Mechanical Stop

123858210
5261420144: RNCC: 3 | RNVC: 2

11 Jul 2011

5340-12-316-5919
Double Angle Bracket

123165919
0242 4796: RNCC: 3 | RNVC: 2
02424796ED0148-16: RNCC: 5 | RNVC: 2

26 Jan 1989

5340-12-393-7727
Spring Tension Clip

123937727
9840221300: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-12-357-9191
Dust And Moisture Seal Protective Cover

123579191
2300388-250310.000: RNCC: 2 | RNVC: 2
2300388-250310.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-306-4045
Electrical-Mechanical Equipment Post

123064045
12563: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-393-8125
Tee Hinge

123938125
160-82173: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-12-353-0904
Angle Bracket

123530904
650.35: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-12-042-1627

5340-12-320-5750
Rod End Clevis

123205750
4900059-751313.002.0: RNCC: 3 | RNVC: 2
1229172: RNCC: 5 | RNVC: 2

26 Jan 1990

5340-12-174-4097
Clamping Catch

121744097
7882699: RNCC: 3 | RNVC: 2
7882-699: RNCC: 5 | RNVC: 2
1000025-851300: RNCC: 5 | RNVC: 9

29 Jun 1978

5340-12-347-5800
Hasp Staple

123475800
97.0066.3315: RNCC: 3 | RNVC: 2
999999 01631 4 5042: RNCC: 5 | RNVC: 2

11 Jan 1999

5340-12-394-1182
Mounting Bracket

123941182
11.40843-0110: RNCC: 3 | RNVC: 2
11.40843-0110: RNCC: 5 | RNVC: 2

6 Nov 2013

5340-12-304-4357
Angle Bracket

123044357
537161-3012.000: RNCC: 3 | RNVC: 2
537161-3012.000: RNCC: 5 | RNVC: 9

17 Jul 1985

5340-12-321-2652
Electrical-Mechanical Equipment Post

123212652
5801846-12.001: RNCC: 2 | RNVC: 2
5801846-12.001: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-12-314-3615
Helical Compression Spring Seat

123143615
R900170977: RNCC: 3 | RNVC: 2
170977: RNCC: 5 | RNVC: 9

30 Jun 1988

5340-12-314-3616
Helical Compression Spring Seat

123143616
R900169083: RNCC: 3 | RNVC: 2
169083: RNCC: 5 | RNVC: 9

30 Jun 1988

5340-12-329-0740
Nonmetallic Bumper

123290740
43714387-601: RNCC: 2 | RNVC: 2
43714387-601: RNCC: 3 | RNVC: 2

17 Jul 1992

5340-12-148-4668

5340-12-359-0458
Webbing Strap

123590458
4357927496: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-391-0194
Expansion Plug

123910194
890.17.05: RNCC: 3 | RNVC: 2

15 Jan 2013

5340-12-323-4961
Expansion Plug

123234961
51916060039: RNCC: 3 | RNVC: 2

3 Dec 1990

5340-12-195-0508
Nut And Bolt Locking Plate

121950508
WG 402 564: RNCC: 2 | RNVC: 2
WG 402 564: RNCC: 3 | RNVC: 9
WG 402 564: RNCC: 5 | RNVC: 2
WG402564: RNCC: 5 | RNVC: 2
WG402564: RNCC: 5 | RNVC: 9

7 Jan 1983

5340-12-171-8621

5340-12-044-0574

5340-12-199-0426
Flush Lock

121990426
251829211: RNCC: 3 | RNVC: 9

21 Mar 1984

5340-12-199-7856
Mending Plate

121997856
81974850157: RNCC: 3 | RNVC: 2

30 May 1984

5340-12-321-9382
Mounting Bracket

123219382
CF 324 678 A: RNCC: 2 | RNVC: 2
CF 324 678 A: RNCC: 3 | RNVC: 2
CF 324 678 A: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-12-319-5044
Caster Frame

123195044
4900059-751314.001.0: RNCC: 3 | RNVC: 2
1229183: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-359-3377
Spring Tension Clip

123593377
81217: RNCC: 3 | RNVC: 2
16131465119: RNCC: 5 | RNVC: 2

24 Jan 2003

5340-12-701-3398
Rod End Connector

127013398
VG95211-ML-127013398: RNCC: 2 | RNVC: 2
5.12.5111.1340.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-3719
Mending Plate

123213719
1304 307 083: RNCC: 3 | RNVC: 2
(241)A39630-114620: RNCC: 5 | RNVC: 2
1304307083: RNCC: 5 | RNVC: 2

10 May 1990

5340-12-330-4404
Mounting Bracket

123304404
9000 3011: RNCC: 3 | RNVC: 2

15 Dec 1992

5340-12-328-6434
Mending Plate

123286434
160-24570-62: RNCC: 3 | RNVC: 2
160-24570.62: RNCC: 5 | RNVC: 2
160-24570-62: RNCC: 5 | RNVC: 2
160-24570.62: RNCC: 5 | RNVC: 9

11 Jun 1992

5340-12-177-9163
Angle Bracket

121779163
81254250001: RNCC: 3 | RNVC: 2

7 Mar 1979

5340-12-145-0067
Rod End Clevis

121450067
8ATAN16727: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-122-2349

5340-12-390-0279
Loop Clamp

123900279
304641: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-360-6987
Elastic Strap

123606987
63-T41688111: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-165-6653
Nut And Bolt Locking Plate

121656653
114A34008: RNCC: 3 | RNVC: 2

11 Jun 1976

5340-12-094-4669

5340-12-042-2734

5340-12-373-9377
Extension Drawer Slide

123739377
3036.893: RNCC: 3 | RNVC: 2

20 Dec 2007

5340-12-384-4221
Angle Bracket

123844221
4209706: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-12-327-3818
Filler Opening Cap

123273818
DIN73400-DV40KL: RNCC: 2 | RNVC: 2
096 200 41: RNCC: 5 | RNVC: 2
DV40KL DIN73400: RNCC: 5 | RNVC: 2

16 Jan 1992

5340-12-335-5534
Mounting Bracket

123355534
1411315003: RNCC: 3 | RNVC: 2
0000740969: RNCC: 5 | RNVC: 2

31 Aug 1994

5340-12-386-0019
Mounting Plate

123860019
5241538440: RNCC: 3 | RNVC: 2

28 Jul 2011

5340-12-383-0012
Mounting Bracket

123830012
2300471-060010.00.0: RNCC: 2 | RNVC: 2
2300471-060010.00.0: RNCC: 3 | RNVC: 2

1 Sep 2010

5340-12-361-2123
Angle Bracket

123612123
J72220021-403: RNCC: 3 | RNVC: 2

4 Sep 2003

5340-12-189-4756
Sealing Plug Assembly

121894756
45840-21191: RNCC: 3 | RNVC: 2
45840-21191: RNCC: 5 | RNVC: 2

29 Sep 1981

5340-12-194-5241
Lock-Release Lever

121945241
20-5140-031: RNCC: 3 | RNVC: 2

12 Nov 1982

5340-12-354-8571
Elastic Strap

123548571
8310-0022: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-304-5011
Mending Plate

123045011
4900277-12: RNCC: 2 | RNVC: 2
4900277-12: RNCC: 2 | RNVC: 2
4900277-12: RNCC: 5 | RNVC: 9

24 Jul 1985

5340-12-308-4789
Pipe Bracket

123084789
160-714609-01: RNCC: 3 | RNVC: 2
160-714609-01: RNCC: 5 | RNVC: 9

15 Oct 1986

5340-12-368-6099
Angle Bracket

123686099
553-160000.06.0: RNCC: 3 | RNVC: 2

29 Mar 2006

5340-12-701-6548
Mounting Plate

127016548
VG95211-ML-127016548: RNCC: 2 | RNVC: 2
5.12.7208.0501.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-367-8736
Split Tubular Clip

123678736
488417: RNCC: 3 | RNVC: 2
IAS 2-FA: RNCC: 5 | RNVC: 2

26 Oct 2005

5340-12-330-7306
Compression Cup

123307306
025-0002-054-009: RNCC: 3 | RNVC: 2
0003380197: RNCC: 5 | RNVC: 2
E025-0002-054-009: RNCC: 5 | RNVC: 2

2 Feb 1993

5340-12-171-9889
Extension Drawer Slide

121719889
66-3506-252-05A002: RNCC: 3 | RNVC: 2
497402: RNCC: 5 | RNVC: 2

8 Dec 1977

5340-12-300-2626
Mending Plate

123002626
5801411-4125.022: RNCC: 3 | RNVC: 2
5801411-4125-022: RNCC: 5 | RNVC: 2

19 Jul 1984

5340-12-389-0718
Expansion Shield

123890718
NO PRIMARY REF 12-389-0718: RNCC: 3 | RNVC: 2
050256: RNCC: 5 | RNVC: 2
07402731: RNCC: 5 | RNVC: 2
2500601560: RNCC: 5 | RNVC: 2
050256: RNCC: 5 | RNVC: 2

24 May 2012

5340-12-302-4738
Double Angle Bracket

123024738
556-372020.060: RNCC: 3 | RNVC: 2
556-372020-060: RNCC: 5 | RNVC: 2

4 Jan 1985

5340-12-165-8063
Retaining Band

121658063
0240 7344: RNCC: 3 | RNVC: 2
2407344: RNCC: 5 | RNVC: 2
2407344KZ0146-39: RNCC: 5 | RNVC: 2
2400232UB0146-39: RNCC: 5 | RNVC: 9

30 Jun 1976

5340-12-169-0910
Resilient Mount

121690910
2K2-AAM-40: RNCC: 3 | RNVC: 2
2K2-AAM-40: RNCC: 5 | RNVC: 9
2K2AAM40: RNCC: 5 | RNVC: 9

14 Apr 1977

5340-12-180-5023
Mounting Plate

121805023
532104-0196: RNCC: 3 | RNVC: 2
532104-0196: RNCC: 5 | RNVC: 9
532104-0196.000: RNCC: 5 | RNVC: 9

14 Sep 1979

5340-12-305-8057
Webbing Strap

123058057
TL5340-0009: RNCC: 2 | RNVC: 2
5340-0009: RNCC: 5 | RNVC: 9

16 Dec 1985

5340-12-361-2956
Support Hook

123612956
LAB-AGE-300000.01: RNCC: 3 | RNVC: 2

15 Sep 2003

5340-12-701-7191
Angle Bracket

127017191
VG95211-ML-127017191: RNCC: 2 | RNVC: 2
5.12.7601.8380.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-3787
Double Angle Bracket

123213787
1204 5648: RNCC: 3 | RNVC: 2
3.418.0.973.006.4: RNCC: 5 | RNVC: 2
30.1011-20.4: RNCC: 5 | RNVC: 2

11 May 1990

5340-12-358-7820
Angle Bracket

123587820
J92222222-403: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-342-6173
Pawl Fastener

123426173
U100-3361-000: RNCC: 2 | RNVC: 2
U100-3361-000: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-132-7606
Loop Clamp

121327606
6.0402.05.0.0606: RNCC: 3 | RNVC: 9
0996 2623: RNCC: 5 | RNVC: 2
6-0402-05-0-0606: RNCC: 5 | RNVC: 9
C6X6N1148: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-350-2920
Dust And Moisture Seal Protective Plug

123502920
G1BN230-02: RNCC: 3 | RNVC: 2
AGT5000/20-06-000: RNCC: 5 | RNVC: 2

14 Mar 2000

5340-12-199-7309
Dust And Moisture Seal Protective Cap

121997309
331008-0001.000: RNCC: 3 | RNVC: 2
331008-0001.000: RNCC: 5 | RNVC: 9

25 May 1984

5340-12-326-8842
Mounting Plate

123268842
279.823 526: RNCC: 3 | RNVC: 2
1392152-350036.186: RNCC: 5 | RNVC: 9

5 Nov 1991

5340-12-305-4723
Access Cover

123054723
5804-2000: RNCC: 3 | RNVC: 2

11 Nov 1985

5340-12-158-2848
Electrical-Mechanical Equipment Post

121582848
512201-0216.000: RNCC: 3 | RNVC: 2
512201-0216: RNCC: 5 | RNVC: 2
6736-12000-13: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-352-2744
Rod End Clevis

123522744
VG95211-ML-123522744: RNCC: 2 | RNVC: 2
160-88433-07: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-12-372-4664
Dust And Moisture Seal Protective Cap-Plug

123724664
330 L 14: RNCC: 3 | RNVC: 2
81.96002-0521: RNCC: 5 | RNVC: 2
81960020521: RNCC: 5 | RNVC: 2

19 Jul 2007

5340-12-358-4239
Access Cover

123584239
2500262-190231.000.0: RNCC: 2 | RNVC: 2
2500262-190231.000.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-372-1498
Retaining Strap

123721498
82974010175: RNCC: 3 | RNVC: 2
82.9740.10175: RNCC: 5 | RNVC: 2
82.97401-0175: RNCC: 5 | RNVC: 2

21 Jun 2007

5340-12-365-5089
Spacing Threaded Standoff

123655089
PAN5171-08-095: RNCC: 3 | RNVC: 2

11 Jan 2005

5340-12-354-8124
Access Cover

123548124
8262-0014: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-328-9751
Access Cover

123289751
916259-4000: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-174-3382
Retaining Strap

121743382
52-0164-300-02: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-12-332-3561
Double Angle Bracket

123323561
7243912: RNCC: 3 | RNVC: 2
5803522-129000.001: RNCC: 5 | RNVC: 2
724.3912: RNCC: 5 | RNVC: 2
5803522-129000.001: RNCC: 5 | RNVC: 9

3 Aug 1993

5340-12-183-0532
Angle Bracket

121830532
2300031-812000-03: RNCC: 2 | RNVC: 2
42484818: RNCC: 5 | RNVC: 2
42484818EY5056-80: RNCC: 5 | RNVC: 2
2300031-812000-03: RNCC: 5 | RNVC: 9
2300031-812000.03: RNCC: 5 | RNVC: 9

15 Mar 1980

5340-12-185-9352
Manual Control Handle

121859352
751290-007-0: RNCC: 3 | RNVC: 2
1227740: RNCC: 5 | RNVC: 2
4900059-751290-007-0: RNCC: 5 | RNVC: 2
4900059-751290.007.0: RNCC: 5 | RNVC: 2
4900059-751290-007-0: RNCC: 5 | RNVC: 9
4900059-751290.007.0: RNCC: 5 | RNVC: 9

11 Nov 1980

5340-12-365-5813
Double Angle Bracket

123655813
J27420226-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-328-9069
Nonmetallic Bumper

123289069
22002-12: RNCC: 3 | RNVC: 2
22002-12: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-356-5234
Detent Plunger

123565234
11.11175-0039: RNCC: 3 | RNVC: 2
11.11174-0196POS022: RNCC: 5 | RNVC: 2

7 Mar 2002

5340-12-702-1711
Mounting Bracket

127021711
VG95211-ML-127021711: RNCC: 2 | RNVC: 2
30.7117.130: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-361-6990
Angle Bracket

123616990
J92228272-001: RNCC: 3 | RNVC: 2

5 Nov 2003

5340-12-384-3227
Spring Tension Clip

123843227
7262167: RNCC: 3 | RNVC: 2

14 Feb 2011

5340-12-322-3051
Helical Compression Spring Seat

123223051
076263: RNCC: 3 | RNVC: 2

9 Aug 1990

5340-12-150-8473
Nonmetallic Bumper

121508473
8330780138: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-329-4966
Handle Grip

123294966
566.11E: RNCC: 3 | RNVC: 2
P009271568721000: RNCC: 5 | RNVC: 2

25 Aug 1992

5340-12-307-0878
Nonmetallic Bumper

123070878
12900: RNCC: 3 | RNVC: 2

7 May 1986

5340-12-369-0597
Spring Tension Clip

123690597
0069881878: RNCC: 3 | RNVC: 2

17 May 2006

5340-12-164-0369

5340-12-187-5460
Dust And Moisture Seal Protective Cap-Plug

121875460
GPN610U31: RNCC: 3 | RNVC: 2
610U31: RNCC: 5 | RNVC: 2
U31GPN610: RNCC: 5 | RNVC: 9
U31: RNCC: 5 | RNVC: 9
610003100: RNCC: 5 | RNVC: 9
GPN610,U31: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-301-7421
Nonmetallic Bumper

123017421
4179247: RNCC: 3 | RNVC: 2
S12B.F01.13.00.007: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-360-0975
Loop Clamp

123600975
9419950101: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-352-5897
Loop Clamp

123525897
37/1: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-12-163-7475
Compression Cup

121637475
100VG84731: RNCC: 2 | RNVC: 2
D52-1: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-371-5569
Retaining Bail

123715569
1715524: RNCC: 2 | RNVC: 2
2300495-970197.003.0: RNCC: 3 | RNVC: 2

18 Apr 2007

5340-12-043-8096

5340-12-196-1305
Nonmetallic Solid Wheel

121961305
20-5140-329: RNCC: 3 | RNVC: 2

1 Jun 1983

5340-12-394-4000
Helical Compression Spring Seat

123944000
F1.1289-27-13-00.20-00: RNCC: 3 | RNVC: 2

28 Nov 2013

5340-12-300-7367
Angle Bracket

123007367
5801997-323000.00: RNCC: 2 | RNVC: 2
5801997-323000.00: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-193-5540
Dust And Moisture Seal Protective Cap-Plug

121935540
900A19: RNCC: 3 | RNVC: 2
900001900: RNCC: 5 | RNVC: 2
GPN900,A19: RNCC: 5 | RNVC: 2
GPN900/A19: RNCC: 5 | RNVC: 2
GPN900A19: RNCC: 5 | RNVC: 2

3 Aug 1982

5340-12-700-1929
Protection Bellows

127001929
51-260997024: RNCC: 2 | RNVC: 2
765-50-SB600: RNCC: 3 | RNVC: 2

4 Nov 1991

5340-12-302-0448
Mending Plate

123020448
536077-0076: RNCC: 3 | RNVC: 2
536077-0901.000: RNCC: 5 | RNVC: 9
536077-0901: RNCC: 5 | RNVC: 9
536077-0901: RNCC: 5 | RNVC: 9
536077-0901.000: RNCC: 5 | RNVC: 9

29 Nov 1984

5340-12-370-7510
Loop Clamp

123707510
06152099102: RNCC: 3 | RNVC: 2
82974450016: RNCC: 5 | RNVC: 2
82.97445-0016: RNCC: 6 | RNVC: 9

15 Dec 2006

5340-12-357-2562
Dust And Moisture Seal Protective Cap

123572562
227883: RNCC: 3 | RNVC: 2

27 May 2002

5340-12-128-6127

5340-12-357-7059
Clamping Catch

123577059
323558: RNCC: 3 | RNVC: 2
0006300490: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-12-363-8981
Access Cover

123638981
4272640111: RNCC: 3 | RNVC: 2

3 Aug 2004

5340-12-025-0774

5340-12-375-1288
Expansion Shield

123751288
0903 816 080: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-12-128-6602

5340-12-342-1397
Access Cover

123421397
5600300055: RNCC: 3 | RNVC: 2

18 Dec 1996

5340-12-335-4980
Protection Bellows

123354980
FT NL 18000.114: RNCC: 3 | RNVC: 2
954444: RNCC: 5 | RNVC: 2
18000.114: RNCC: 5 | RNVC: 2

23 Aug 1994

5340-12-194-4107
V Halte- Schlaufe

5340-12-375-7948
Abdeckung

123757948
03-129437/0: RNCC: 3 | RNVC: 2
03-129437/0: RNCC: 5 | RNVC: 9

4 Jul 2008

5340-12-362-0797
Shimmy Damper

123620797
M/5675/0/4: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-352-4976
Mounting Bracket

123524976
521910-970170.003.0: RNCC: 2 | RNVC: 2
521910-970170.003.0: RNCC: 3 | RNVC: 2
1520501: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-304-6487
Lock-Release Lever

123046487
84500 90006: RNCC: 2 | RNVC: 2
8450090006: RNCC: 3 | RNVC: 2
84500 90006: RNCC: 5 | RNVC: 9

8 Aug 1985

5340-12-162-5075
Hinge Torsion Bar

121625075
3420028703: RNCC: 3 | RNVC: 2
34200 28703: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-360-6054
Mounting Plate

123606054
EFP17010-1: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-12-191-7076
Shimmy Damper

121917076
4604920282: RNCC: 3 | RNVC: 2
1711-34: RNCC: 5 | RNVC: 2
721 1 12 015 1: RNCC: 5 | RNVC: 9

24 Feb 1982

5340-12-193-2936
Dust And Moisture Seal Protective Plug

121932936
6,5N15042: RNCC: 3 | RNVC: 2
6-5N15042: RNCC: 5 | RNVC: 2
915042006000: RNCC: 5 | RNVC: 2

8 Jul 1982

5340-12-344-2435
Retaining Strap

123442435
55.2502.102.72: RNCC: 3 | RNVC: 2

7 Oct 1997

5340-12-347-7114
Mounting Bracket

123477114
9239293000: RNCC: 3 | RNVC: 2
923929 3000: RNCC: 5 | RNVC: 2

1 Feb 1999

5340-12-393-3729
Loop Clamp

123933729
088317: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-12-175-1009
Coat And Hat Hook

121751009
621K0048: RNCC: 3 | RNVC: 2
0064-81-814-0001: RNCC: 5 | RNVC: 1
3818140001: RNCC: 5 | RNVC: 2

23 Aug 1978

5340-12-355-3392
Access Cover

123553392
22-320-JK-047: RNCC: 3 | RNVC: 2
1603295-9500: RNCC: 5 | RNVC: 2

6 Nov 2001

5340-12-355-1519
Mounting Bracket

123551519
J21220023-403: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-12-384-1062
Bumper

123841062
DIN95364-A20X10-NR55ST: RNCC: 2 | RNVC: 2

21 Jan 2011

5340-12-314-2170
Angle Bracket

123142170
512214-0430.000: RNCC: 3 | RNVC: 2
512214-0430: RNCC: 5 | RNVC: 2

17 Jun 1988

5340-12-321-4300
Mounting Bracket

123214300
58R062-3-4: RNCC: 2 | RNVC: 2
58R062-3-4: RNCC: 3 | RNVC: 2
58R062-3-4:1-6: RNCC: 5 | RNVC: 2

17 May 1990

5340-12-180-2717
Butt Hinge

121802717
39-1041: RNCC: 3 | RNVC: 2

31 Aug 1979

5340-12-314-7542
Butt Hinge

123147542
4200066-114102.00: RNCC: 3 | RNVC: 2
29 8316 76: RNCC: 5 | RNVC: 9
29 8316 76: RNCC: 5 | RNVC: 9
42099-3810.02: RNCC: 5 | RNVC: 9

6 Aug 1988

5340-12-122-0359
Spring Tension Clip

121220359
27-116-31-03: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-338-7998
Angle Bracket

123387998
6700017-630060.01: RNCC: 2 | RNVC: 2
6700017-630060.01: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-392-8698
Sliding Door Hanger

123928698
6000062-194140.000.0: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-12-199-4207
Metal Runner

121994207
2300088-310631.07: RNCC: 2 | RNVC: 2
2300088-310631-07: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-319-4541
Access Cover

123194541
7068-61140-000-2: RNCC: 3 | RNVC: 2

3 Oct 1989

5340-12-308-2114
Double Angle Bracket

123082114
1204 5511: RNCC: 3 | RNVC: 2
3.415.0.637.016.4: RNCC: 5 | RNVC: 2
26.13-244.4: RNCC: 5 | RNVC: 9
3.415.0.637.016.4: RNCC: 5 | RNVC: 9

15 Sep 1986

5340-12-331-7126
Resilient Mount

123317126
H95-216-110-135-8: RNCC: 3 | RNVC: 2

14 Jun 1993

5340-12-312-7412
Resilient Mount

123127412
HL-BUCHSE 735040.NK50.ST: RNCC: 3 | RNVC: 2
735040: RNCC: 3 | RNVC: 2
735040: RNCC: 5 | RNVC: 2

1 Feb 1988

5340-12-339-1613
Resilient Mount

123391613
DIN95363-A50X30-M10X28-CR45ST: RNCC: 2 | RNVC: 2
500042-M10X28.CR45.ST: RNCC: 5 | RNVC: 2
5218040/CR45: RNCC: 5 | RNVC: 2
5218 040 SHORE 45: RNCC: 5 | RNVC: 9
VG95363-A50X30-M10X28-CR45ST: RNCC: 5 | RNVC: 9

19 Oct 1995

5340-12-359-9374
Mending Plate

123599374
2500261-185520.002.0: RNCC: 2 | RNVC: 2
2500261-185520.002.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-702-5579
Mounting Plate

127025579
VG95211-ML-127025579: RNCC: 2 | RNVC: 2
5.51.7240.0440.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-315-6110
Resilient Mount

123156110
H95-216-110-135-8-FM: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-12-702-0208
Loop Clamp

127020208
VG95211-ML-127020208: RNCC: 2 | RNVC: 2
200N118-2: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-2529
Access Hole Frame

123652529
2500278-196810.000.0: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-12-191-4198
Bow Handle

121914198
54.1806.271.01: RNCC: 3 | RNVC: 2
54-1806-271-01: RNCC: 5 | RNVC: 2

2 Feb 1982

5340-12-338-8027
Mounting Plate

123388027
6700017-203250.00: RNCC: 2 | RNVC: 2
6700017-203250.00: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-185-1709
Loop Clamp

121851709
LN29849-20: RNCC: 2 | RNVC: 2
20LN29849: RNCC: 5 | RNVC: 2

18 Sep 1980

5340-12-347-6033
Mounting Bracket

123476033
8854 131-131: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-162-9335
Resilient Mount

121629335
DIN95363-C20X25-NR55ST: RNCC: 2 | RNVC: 2
57810540015: RNCC: 5 | RNVC: 2
781054MITTEL: RNCC: 5 | RNVC: 2
520013-M6.NR55.ST: RNCC: 5 | RNVC: 2
59110070: RNCC: 5 | RNVC: 2
VG95363-C20X25-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-340-2632
Access Cover

123402632
130010X16: RNCC: 3 | RNVC: 2
000N18005: RNCC: 5 | RNVC: 2
000N18005/1: RNCC: 5 | RNVC: 2

20 Mar 1996

5340-12-194-3856
Bridge Clamp

121943856
66.3874.720.02-A001: RNCC: 3 | RNVC: 2
164853: RNCC: 5 | RNVC: 2
66-3874-720-02A001: RNCC: 5 | RNVC: 9

28 Oct 1982

5340-12-300-3516
Turnbuckle

123003516
P-516767-403: RNCC: 3 | RNVC: 2
P516767-403: RNCC: 5 | RNVC: 2

26 Jul 1984

5340-12-701-2738
Mounting Bracket

127012738
VG95211-ML-127012738: RNCC: 2 | RNVC: 2
5.12.4806.3102.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-340-2074
Butt Hinge

123402074
ZPS 4-4002-1: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-12-381-2963
Mounting Plate

123812963
424-04-K3-1: RNCC: 3 | RNVC: 2
4250473100356: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-361-7614
Loop Clamp

123617614
DIN3016-1-A1-6X12-W5: RNCC: 2 | RNVC: 2
DIN3016-1-A1-6X12-W5-CR: RNCC: 5 | RNVC: 9

14 Nov 2003

5340-12-197-6464
Dust And Moisture Seal Protective Cap

121976464
1976393: RNCC: 3 | RNVC: 2
996 181: RNCC: 5 | RNVC: 2
996181: RNCC: 5 | RNVC: 2
996-181: RNCC: 5 | RNVC: 9
996181: RNCC: 5 | RNVC: 9
976393: RNCC: 5 | RNVC: 9

10 Nov 1983

5340-12-147-2257
Metal Runner

121472257
C40165-A373-B45: RNCC: 3 | RNVC: 2
C40165-A373-B45: RNCC: 5 | RNVC: 2
C40165A373B45: RNCC: 5 | RNVC: 2
686472: RNCC: 5 | RNVC: 2
AW.2847.012.00-A001: RNCC: 5 | RNVC: 2
AW2847-012: RNCC: 5 | RNVC: 2
AW2847-012-00A001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-164-8255
Loop Clamp

121648255
040-0130-014-020: RNCC: 3 | RNVC: 2
040 460 018 018: RNCC: 3 | RNVC: 2
1123-079: RNCC: 5 | RNVC: 2
1123079: RNCC: 5 | RNVC: 2
8408150: RNCC: 5 | RNVC: 2
08193647: RNCC: 5 | RNVC: 2
040 400 001 018: RNCC: 5 | RNVC: 2
040400001018: RNCC: 5 | RNVC: 2
040460018018: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-372-3374
Rod End Connector

123723374
4804125010005: RNCC: 3 | RNVC: 2
480/4125-01-00-05: RNCC: 5 | RNVC: 2
480-4125-01-00-05: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-12-356-3697
Mounting Bracket

123563697
2339-070010A06B: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-325-7572
Webbing Strap

123257572
79017/026-1200-0300: RNCC: 3 | RNVC: 2
79017/026-1200-0300: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-305-0504
Angle Bracket

123050504
5801759-120000.002: RNCC: 2 | RNVC: 2
5801759-120000.002: RNCC: 3 | RNVC: 2
5801759-120000.002: RNCC: 5 | RNVC: 9

20 Sep 1985

5340-12-318-1303
Rod End Clevis

123181303
3512 712 52511: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-12-317-7753
Mounting Plate

123177753
4/0421/7507/2: RNCC: 3 | RNVC: 2

11 May 1989

5340-12-390-7485
Access Door Hinge

123907485
107W175000.001.0: RNCC: 2 | RNVC: 2
107W175000.001.0: RNCC: 3 | RNVC: 2

7 Dec 2012

5340-12-318-7675
Retaining Strap

123187675
1309950020: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-12-182-0692
Angle Bracket

121820692
81974860490: RNCC: 3 | RNVC: 2

14 Jan 1980

5340-12-380-5346
Turnbuckle

123805346
2902440071: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-12-315-3051
Mounting Bracket

123153051
3875242440: RNCC: 3 | RNVC: 2
387 524 24 40: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-144-8687
Rod End Clevis

121448687
A8LN29607: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-153-2581
Electrical-Mechanical Equipment Post

121532581
020270: RNCC: 3 | RNVC: 2
2027: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-021-5028

5340-12-178-7818
Electrical-Mechanical Equipment Post

121787818
10450-02: RNCC: 3 | RNVC: 2
477112-002: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-701-8419
Loop Clamp

127018419
VG95211-ML-127018419: RNCC: 2 | RNVC: 2
5148A-32: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-319-4503
Clamping Catch

123194503
2782-365101.000.0: RNCC: 2 | RNVC: 2
2782-365101.000.0: RNCC: 3 | RNVC: 2

3 Oct 1989

5340-12-361-0784
Mounting Bracket

123610784
2300246-261788.00.0: RNCC: 2 | RNVC: 2
2300246-261788.00.0: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-12-363-8289
Access Cover

123638289
321210: RNCC: 3 | RNVC: 2
321210-RAL6031-F9: RNCC: 5 | RNVC: 2

28 Jul 2004

5340-12-386-5313
Swivel Caster

123865313
K2780RISQ5-A590000: RNCC: 3 | RNVC: 2
00166-187-000: RNCC: 5 | RNVC: 2

8 Sep 2011

5340-12-179-2086
Hand Crank

121792086
2-3708HANDKURBEL: RNCC: 3 | RNVC: 9

15 Jun 1979

5340-12-307-1051
Coat And Hat Hook

123071051
602K0334-1: RNCC: 3 | RNVC: 2
0006710135: RNCC: 5 | RNVC: 2

9 May 1986

5340-12-356-1878
Webbing Strap

123561878
80303640: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-307-1698
Dust And Moisture Seal Protective Cap-Plug

123071698
610U41: RNCC: 3 | RNVC: 2
9560141090: RNCC: 5 | RNVC: 2
610U41: RNCC: 5 | RNVC: 2
GPN610U41: RNCC: 5 | RNVC: 2
U41: RNCC: 5 | RNVC: 9
610004100: RNCC: 5 | RNVC: 9
GPN610,U41: RNCC: 5 | RNVC: 9

16 May 1986

5340-12-157-3414
Door Handle

121573414
6126568: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-363-2906
Flush Lock

123632906
599.076.007.010: RNCC: 3 | RNVC: 2
81668022155: RNCC: 5 | RNVC: 2

20 May 2004

5340-12-181-5595
Loop Clamp

121815595
2210428121: RNCC: 3 | RNVC: 2

30 Nov 1979

5340-12-151-4783
Electrical-Mechanical Equipment Post

121514783
23111-0811-01: RNCC: 2 | RNVC: 2
23111-0811.01: RNCC: 2 | RNVC: 2
23111-0811-01: RNCC: 3 | RNVC: 2
23111-0811-01: RNCC: 5 | RNVC: 9
23111-0811-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-173-0822
Detent Plunger

121730822
5800573-1122-058: RNCC: 3 | RNVC: 2
5800573-1122.058: RNCC: 5 | RNVC: 2
C42326-A19-C115: RNCC: 5 | RNVC: 2
C42326A19C115: RNCC: 5 | RNVC: 2

20 Mar 1978

5340-12-305-4559
Mending Plate

123054559
2500121-230000.01: RNCC: 2 | RNVC: 2
2500121-230000.01: RNCC: 3 | RNVC: 2
2500121-230000.01: RNCC: 5 | RNVC: 9

8 Nov 1985

5340-12-184-8308
Angle Bracket

121848308
5801505-312-010: RNCC: 3 | RNVC: 2
5801505-312.010: RNCC: 5 | RNVC: 2

21 Aug 1980

5340-12-387-0282
Swivel Caster

123870282
141713: RNCC: 3 | RNVC: 2
GKL02/100/30R-FSTR: RNCC: 5 | RNVC: 2

27 Oct 2011

5340-12-326-6474
Door Button

123266474
1B7-14-020-01-3: RNCC: 3 | RNVC: 2
1B7-14.020-01.3: RNCC: 5 | RNVC: 2

17 Oct 1991

5340-12-702-6448
Loop Clamp

127026448
VG95211-ML-127026448: RNCC: 2 | RNVC: 2
987S50-38-15-BP: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-2243
Access Cover

123652243
2300397-185113.000.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-702-4915
Rod End Connector

127024915
VG95211-ML-127024915: RNCC: 2 | RNVC: 2
5.51.5101.0660.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-318-8596
Resilient Mount

123188596
DIN95369-A3-5-M-ST: RNCC: 2 | RNVC: 2
1340202040: RNCC: 3 | RNVC: 2
60-200-070-HD: RNCC: 5 | RNVC: 2
C 3695 856: RNCC: 5 | RNVC: 2
151005-M10-HD.ST-70: RNCC: 5 | RNVC: 2
C2090 HDS: RNCC: 5 | RNVC: 9
VG95369-A3-5-MVQ-H-ST: RNCC: 5 | RNVC: 9
C2090HDSM10: RNCC: 5 | RNVC: 9

22 Aug 1989

5340-12-314-6267
Access Cover

123146267
39-1894-000000.01.0: RNCC: 2 | RNVC: 2
39-1894-000000.01.0: RNCC: 3 | RNVC: 2
WW 492 075: RNCC: 5 | RNVC: 9

22 Jul 1988

5340-12-195-9521
Bow Handle

121959521
277.1: RNCC: 3 | RNVC: 2
7400085-0312.00: RNCC: 5 | RNVC: 2
277-1: RNCC: 5 | RNVC: 2

5 May 1983

5340-12-349-4795
Double Angle Bracket

123494795
U60.231400.01-00: RNCC: 3 | RNVC: 2

19 Nov 1999

5340-12-370-7938
Spring Tension Clip

123707938
8713195: RNCC: 3 | RNVC: 2
CTH19U04-...30: RNCC: 5 | RNVC: 1
51.97430-0005: RNCC: 5 | RNVC: 2
51974300005: RNCC: 5 | RNVC: 2

21 Dec 2006

5340-12-365-3043
Access Cover

123653043
305226-01: RNCC: 3 | RNVC: 2

17 Dec 2004

5340-12-349-9440
Mounting Plate

123499440
2500238-110100.002.0: RNCC: 2 | RNVC: 2
2500238-110100.002.0: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-12-317-3186
Mounting Bracket

123173186
4900064-4111.038: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-316-5753
Escutcheon Plate

123165753
1128-AL: RNCC: 3 | RNVC: 2
GSV1128-AL: RNCC: 5 | RNVC: 9

25 Jan 1989

5340-12-359-2853
Dust And Moisture Seal Protective Cap

123592853
009-222.300-060: RNCC: 2 | RNVC: 2
009-222.300-060: RNCC: 3 | RNVC: 2

20 Jan 2003

5340-12-380-0150
Mending Plate

123800150
5981-180000.009.0: RNCC: 2 | RNVC: 2
5981-180000.009.0: RNCC: 3 | RNVC: 2

18 Sep 2009

5340-12-702-4490
Mounting Bracket

127024490
VG95211-ML-127024490: RNCC: 2 | RNVC: 2
5.51.0602.1008.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-318-7658
Resilient Mount

123187658
1-214-001-3503: RNCC: 3 | RNVC: 9
08195016: RNCC: 5 | RNVC: 2

15 Aug 1989

5340-12-192-4983
Expansion Shield

121924983
N8-12-8: RNCC: 3 | RNVC: 2
10301717: RNCC: 5 | RNVC: 2

29 Apr 1982

5340-12-339-7088
Mending Plate

123397088
2500255-199900.001.0: RNCC: 2 | RNVC: 2
2500255-199900.001.0: RNCC: 3 | RNVC: 2

29 Dec 1995

5340-12-390-3940
Loop Clamp

123903940
DIN3016-1-D1-35X15-W1-2-NBR: RNCC: 2 | RNVC: 2

8 Nov 2012

5340-12-188-6306
Handwheel

121886306
80X8VG85080RG5: RNCC: 2 | RNVC: 2
80X8-4-1132GCUSN5ZNPB: RNCC: 3 | RNVC: 9
80X8VG85080GCUSN5ZNPB: RNCC: 5 | RNVC: 2

21 Jul 1981

5340-12-315-6647
Angle Bracket

123156647
510252-0533.000: RNCC: 3 | RNVC: 2
510252-0533: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-304-4178
Retaining Strap

123044178
310.000.002: RNCC: 3 | RNVC: 2
378.15725: RNCC: 5 | RNVC: 2
310-000-002: RNCC: 5 | RNVC: 9
310-000.002: RNCC: 5 | RNVC: 9

16 Jul 1985

5340-12-198-0448
Mending Plate

121980448
C42080-A6-C104: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-340-2076
Luggage Lock

123402076
ZPS 2-220: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-12-337-6543
Bow Handle

123376543
588242: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-12-091-2528

5340-12-340-6929
Metallic Bumper

123406929
8450341801: RNCC: 3 | RNVC: 2
84503 41801: RNCC: 5 | RNVC: 9

24 May 1996

5340-12-301-1968
Butt Hinge Leaf

123011968
7010-882.05(3): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-701-3342
Loop Clamp

127013342
VG95211-ML-127013342: RNCC: 2 | RNVC: 2
5.12.5105.1380.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-354-5116
Mounting Bracket

123545116
2300007-181036.000.0: RNCC: 2 | RNVC: 2
2300007-181036.000.0: RNCC: 3 | RNVC: 2

23 Jul 2001

5340-12-701-4370
Mounting Bracket

127014370
VG95211-ML-127014370: RNCC: 2 | RNVC: 2
5.12.5313.2791.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-195-1903
Mending Plate

121951903
25704-350600.05.0: RNCC: 2 | RNVC: 2
25704-350600-05-0: RNCC: 3 | RNVC: 2
25704-350600.05.0: RNCC: 3 | RNVC: 2
25704-350600-05-0: RNCC: 5 | RNVC: 9
25704-350600.05.0: RNCC: 5 | RNVC: 9

24 Jan 1983

5340-12-375-4729
Multiple Angle Bracket

123754729
58R153-2631-1: RNCC: 2 | RNVC: 2
58R153-2631-1: RNCC: 3 | RNVC: 2

5 Jun 2008

5340-12-366-3112
Mounting Bracket

123663112
943275049: RNCC: 3 | RNVC: 2

7 Apr 2005

5340-12-353-4912
Mounting Bracket

123534912
4475420040: RNCC: 3 | RNVC: 2
447 542 00 40: RNCC: 5 | RNVC: 2

30 Mar 2001

5340-12-340-6936
Bail Handle

123406936
8452311528: RNCC: 3 | RNVC: 2
84523 11528: RNCC: 5 | RNVC: 9

24 May 1996

5340-12-351-5041
Multiple Angle Bracket

123515041
4616400451: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-359-7644
Spacing Threaded Standoff

123597644
T631P3004110: RNCC: 3 | RNVC: 2
T631P3004110: RNCC: 5 | RNVC: 9

10 Mar 2003

5340-12-351-8956
Rod End Connector

123518956
2996.25.94: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-12-300-0013
Angle Bracket

123000013
C249-A34-C8: RNCC: 3 | RNVC: 2

21 Jun 1984

5340-12-702-2183
Mounting Plate

127022183
VG95211-ML-127022183: RNCC: 2 | RNVC: 2
30.7225.180: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-349-2827
Butt Hinge Leaf

123492827
J52423171-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-174-7848
Angle Bracket

121747848
42009286: RNCC: 3 | RNVC: 2
42009286EE5004-26: RNCC: 5 | RNVC: 9

3 Aug 1978

5340-12-334-2815
Butt Hinge

123342815
81972012208: RNCC: 3 | RNVC: 2
81.97201.2208: RNCC: 5 | RNVC: 2
81972012208: RNCC: 5 | RNVC: 9

21 Apr 1994

5340-12-368-1476
Angle Bracket

123681476
1000042-197400.41: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-12-188-4340
Nut And Bolt Locking Plate

121884340
8709940025: RNCC: 2 | RNVC: 2
8709940025: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-12-337-6442
Strap End Clip

123376442
313 0011: RNCC: 3 | RNVC: 2
3130011: RNCC: 5 | RNVC: 2
100067235: RNCC: 5 | RNVC: 2

22 Mar 1995

5340-12-197-2222
Double Angle Bracket

121972222
075-103022-434: RNCC: 3 | RNVC: 2

3 Oct 1983

5340-12-374-5196
Headless Straight Rod

123745196
A-112563B00C: RNCC: 3 | RNVC: 2

22 Feb 2008

5340-12-355-1144
Manual Control Lever

123551144
133892: RNCC: 3 | RNVC: 2

9 Oct 2001

5340-12-136-2238
Dust And Moisture Seal Protective Plug

121362238
81960010029: RNCC: 3 | RNVC: 2
81.96001.0029: RNCC: 5 | RNVC: 2
00.04361-6127: RNCC: 5 | RNVC: 9
00043616127: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-340-2068
Access Cover

123402068
9870786: RNCC: 3 | RNVC: 9
667916:001.25: RNCC: 5 | RNVC: 2
463-611110.000: RNCC: 5 | RNVC: 9

14 Mar 1996

5340-12-370-4833
Dust And Moisture Seal Protective Plug

123704833
2522 4512-115: RNCC: 3 | RNVC: 2

13 Nov 2006

5340-12-313-8460
Mounting Bracket

123138460
NO PRIMARY REF 12-313-8460: RNCC: 3 | RNVC: 2
75108.228: RNCC: 5 | RNVC: 9
75108.228: RNCC: 5 | RNVC: 9

11 May 1988

5340-12-357-6206
Access Cover

123576206
5232-000000-02: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-365-5841
Angle Bracket

123655841
J28230171-001: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-370-4839
Rod End Clevis

123704839
492-181200.004: RNCC: 3 | RNVC: 2

13 Nov 2006

5340-12-193-9558
Electrical-Mechanical Equipment Post

121939558
VG95148B5XM3X15,9-NRST: RNCC: 2 | RNVC: 2
VG95148B5XM3X15,9-NRST: RNCC: 3 | RNVC: 2
67.3521.000.40-A005: RNCC: 3 | RNVC: 2
163799: RNCC: 5 | RNVC: 2
67-3521-000-40A005: RNCC: 5 | RNVC: 9

20 Sep 1982

5340-12-360-7659
Retaining Bail

123607659
D0065633-001: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-309-2806
Retaining Strap

123092806
NO PRIMARY REF 12-309-2806: RNCC: 3 | RNVC: 2
LM-5012: RNCC: 5 | RNVC: 9

9 Jan 1987

5340-12-141-8393
Dust And Moisture Seal Protective Plug

121418393
2859B2: RNCC: 3 | RNVC: 2
1216232EF8928-59: RNCC: 5 | RNVC: 2
0121 6232: RNCC: 5 | RNVC: 2
2859B2: RNCC: 5 | RNVC: 2
1216232: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-370-6693
Rod End Connector

123706693
A65386-1000: RNCC: 3 | RNVC: 2

6 Dec 2006

5340-12-313-3516
Flush Catch Claw

123133516
B61.7.1/7.3: RNCC: 3 | RNVC: 2
753 061: RNCC: 5 | RNVC: 2
B61.7.1/7.1: RNCC: 5 | RNVC: 2

24 Mar 1988

5340-12-306-0700
Mending Plate

123060700
5801984-203000.004.0: RNCC: 2 | RNVC: 2
5801984-203000.004.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-155-0697
Door Handle

121550697
265009: RNCC: 3 | RNVC: 2
235-0-15: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-337-0274
Handle Grip

123370274
81970010401: RNCC: 3 | RNVC: 2
81.97001-0401: RNCC: 5 | RNVC: 2
9617237902: RNCC: 5 | RNVC: 2
961 723 790 2: RNCC: 5 | RNVC: 2

12 Jan 1995

5340-12-701-3686
Mounting Plate

127013686
VG95211-ML-127013686: RNCC: 2 | RNVC: 2
5.12.5302.1712.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-199-2148
Lock-Release Lever

121992148
23176-262120.05.0: RNCC: 2 | RNVC: 2
23176-262120.05.0: RNCC: 3 | RNVC: 2
23176-262120-05-0: RNCC: 5 | RNVC: 9

4 Apr 1984

5340-12-172-1806
Mending Plate

121721806
1000078-700000.15: RNCC: 2 | RNVC: 2
1000078-700000-15: RNCC: 5 | RNVC: 2
1000078-700000-15: RNCC: 5 | RNVC: 9
1000078-700000-15: RNCC: 5 | RNVC: 9

3 Jan 1978

5340-12-176-4127
Dust And Moisture Seal Protective Cap

121764127
30-79501-0055: RNCC: 3 | RNVC: 2

27 Nov 1978

5340-12-338-7646
Lock-Release Lever

123387646
540013-3002.00: RNCC: 3 | RNVC: 2

23 Aug 1995

5340-12-183-2564
Wood Runner

121832564
56-0049-504-03: RNCC: 3 | RNVC: 2

28 Mar 1980

5340-12-170-3062
Loop Clamp

121703062
PAN4263-08: RNCC: 3 | RNVC: 2

7 Jul 1977

5340-12-189-0853
Access Cover

121890853
009-078.947-006: RNCC: 3 | RNVC: 2
009-078-947-006: RNCC: 5 | RNVC: 2
009-078-947-006: RNCC: 5 | RNVC: 9
009-078.947-006: RNCC: 5 | RNVC: 9

26 Aug 1981

5340-12-347-0507
Angle Bracket

123470507
2300002-061160.001: RNCC: 2 | RNVC: 2
9856392: RNCC: 3 | RNVC: 2
2300002-061160.001: RNCC: 5 | RNVC: 2
2300002-061160.001: RNCC: 5 | RNVC: 9
9856392: RNCC: 5 | RNVC: 9

16 Oct 1998

5340-12-182-2534
Rigid Caster

121822534
2300033-311000-24: RNCC: 2 | RNVC: 2
FTW302-03-15-24B: RNCC: 5 | RNVC: 9
2300033-311000.24: RNCC: 5 | RNVC: 9
2300033-311000-24: RNCC: 5 | RNVC: 9

21 Jan 1980

5340-12-322-4883
Door Button

123224883
8100397-270-04: RNCC: 2 | RNVC: 2
8100397-270-04: RNCC: 3 | RNVC: 2

27 Aug 1990

5340-12-340-5201
Helical Compression Spring Seat

123405201
11566410101: RNCC: 3 | RNVC: 2
V5.1Z-54M5 112MMBRZSCR IT305: RNCC: 5 | RNVC: 2
1156-641-0101: RNCC: 5 | RNVC: 2

25 Apr 1996

5340-12-309-2280
Butt Hinge

123092280
P-895134-007: RNCC: 3 | RNVC: 2
P895134-007: RNCC: 5 | RNVC: 2

29 Dec 1986

5340-12-302-6820
Door Handle

123026820
11.009.901-3: RNCC: 3 | RNVC: 2
11-009-901-3: RNCC: 5 | RNVC: 2
11.009.401-3: RNCC: 5 | RNVC: 9
11-009-401-3: RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-153-3250
Mending Plate

121533250
C22166-A20-C34: RNCC: 3 | RNVC: 2
5800633-17-2: RNCC: 5 | RNVC: 2
5800633-17.2: RNCC: 5 | RNVC: 2
C22166A20C34: RNCC: 5 | RNVC: 2
5800633-17-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-5824
Rod End Clevis

123125824
2300194-181200.004: RNCC: 2 | RNVC: 2
2300194-181200.004: RNCC: 3 | RNVC: 2
2300194-181200.004: RNCC: 5 | RNVC: 9
9843540: RNCC: 5 | RNVC: 9
2300194-181200.004: RNCC: 5 | RNVC: 9

19 Jan 1988

5340-12-364-7656
Butt Hinge

123647656
2500306-191120.000.0: RNCC: 3 | RNVC: 2

28 Oct 2004

5340-12-307-3756
Shimmy Damper

123073756
6100129-132: RNCC: 2 | RNVC: 2
FT6100129-132: RNCC: 5 | RNVC: 2
3755218: RNCC: 5 | RNVC: 2
3755218EY3131-80: RNCC: 5 | RNVC: 2
0-3/150/20-295-445A-A: RNCC: 5 | RNVC: 9

10 Jun 1986

5340-12-331-6170
Access Door

123316170
P-875507-409: RNCC: 3 | RNVC: 2
P875507-409: RNCC: 5 | RNVC: 2

28 May 1993

5340-12-393-7725
Expansion Shield

123937725
078645: RNCC: 3 | RNVC: 2
FDN 6/35: RNCC: 5 | RNVC: 2

10 Oct 2013

5340-12-346-7497
Clamping Catch

123467497
E2.40.00.08/6: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-366-0925
Loop Clamp

123660925
EN4114F20WR1: RNCC: 2 | RNVC: 2

8 Mar 2005

5340-12-190-5790
Angle Bracket

121905790
CF 488 497: RNCC: 3 | RNVC: 2
CF 488 497: RNCC: 5 | RNVC: 2
CF488497: RNCC: 5 | RNVC: 2
CF488497: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-355-6269
Mending Plate

123556269
0.081.621.7: RNCC: 3 | RNVC: 2

29 Nov 2001

5340-12-377-7716
Handle Grip

123777716
64293204: RNCC: 3 | RNVC: 2

10 Feb 2009

5340-12-328-9245
Mending Plate

123289245
23305-311010.01.0: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-300-7350
Door Closer

123007350
3097430220: RNCC: 3 | RNVC: 2
2SI2531.000.0: RNCC: 5 | RNVC: 2

25 Aug 1984

5340-12-382-2565
Butt Hinge

123822565
4100036-981220.002: RNCC: 2 | RNVC: 2
4100036-981220.002: RNCC: 3 | RNVC: 2

28 May 2010

5340-12-358-9601
Dust And Moisture Seal Protective Cap

123589601
9016894008: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-368-3715
Hand Crank

123683715
GCE0997050P0100: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-12-359-4334
Webbing Strap

123594334
26352056: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-12-372-5280
Bail Handle

123725280
WM15175: RNCC: 3 | RNVC: 2

25 Jul 2007

5340-12-171-7517
Rod End Clevis

121717517
220.00741: RNCC: 3 | RNVC: 2
22000741: RNCC: 5 | RNVC: 2

10 Nov 1977

5340-12-043-2671

5340-12-020-7730

5340-12-394-4952
Mounting Bracket

123944952
F1.1289-00-00-10.00-04: RNCC: 3 | RNVC: 2

6 Dec 2013

5340-12-185-6363
Electrical-Mechanical Equipment Post

121856363
4559610: RNCC: 3 | RNVC: 2
5801715-020000-002: RNCC: 5 | RNVC: 9
5801715-020000.002: RNCC: 5 | RNVC: 9

21 Oct 1980

5340-12-365-5931
Angle Bracket

123655931
J53230210-405: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-365-5219
Nonmetallic Bumper

123655219
J53230643-003: RNCC: 3 | RNVC: 2

12 Jan 2005

5340-12-124-4598
Leather Strap

121244598
NO PRIMARY REF 12-124-4598: RNCC: 3 | RNVC: 2
A20X250DIN6408ANGEBRAEUNTGENAEHT: RNCC: 5 | RNVC: 9
DIN6408-A20X250-ANGEBRAEUNT,GENA: RNCC: 5 | RNVC: 9
DIN6408-A20X250-GEBRAEUNT,GENAE.: RNCC: 5 | RNVC: 9
DIN6408-A20X250-GEBRAEUNT,GENAE.: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-383-5091
Retaining Strap

123835091
SMJ 234-001-102-360: RNCC: 3 | RNVC: 2
SMJ234-001-102-360: RNCC: 5 | RNVC: 2

2 Nov 2010

5340-12-129-5763
Dust And Moisture Seal Protective Cap

121295763
R16641: RNCC: 3 | RNVC: 2
4061008: RNCC: 3 | RNVC: 2
R23313: RNCC: 5 | RNVC: 2
4061-008: RNCC: 5 | RNVC: 2
R16641: RNCC: 5 | RNVC: 9
42094-05136: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-180-6820
Retaining Strap

121806820
5800748-11.130: RNCC: 3 | RNVC: 2
5800748-11-130: RNCC: 5 | RNVC: 9

26 Sep 1979

5340-12-701-9932
Loop Clamp

127019932
VG95211-ML-127019932: RNCC: 2 | RNVC: 2
155N464-490: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-187-7661
Dust And Moisture Seal Protective Cap

121877661
D20S22: RNCC: 3 | RNVC: 2
8370191575: RNCC: 5 | RNVC: 2
83701 91575: RNCC: 5 | RNVC: 9

6 May 1981

5340-12-043-2723

5340-12-199-3625
Double Angle Bracket

121993625
3095040740: RNCC: 3 | RNVC: 2

14 Apr 1984

5340-12-136-3577
Rubber Bumper

121363577
269011060033: RNCC: 3 | RNVC: 2
269011060033: RNCC: 5 | RNVC: 2
90110633: RNCC: 5 | RNVC: 2
90110633: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-041-6979

5340-12-319-9221
Mounting Bracket

123199221
81264400047: RNCC: 3 | RNVC: 2
193494: RNCC: 3 | RNVC: 2
2803: RNCC: 5 | RNVC: 2

17 Nov 1989

5340-12-319-6537
Double Angle Bracket

123196537
731.33.039: RNCC: 3 | RNVC: 2
V731.33.039: RNCC: 5 | RNVC: 2
731.42.150: RNCC: 5 | RNVC: 9
V731.42.150: RNCC: 5 | RNVC: 9

23 Oct 1989

5340-12-195-8007
Handle Grip

121958007
9176620740: RNCC: 3 | RNVC: 2

19 Apr 1983

5340-12-380-3639
Access Cover

123803639
4258110111: RNCC: 3 | RNVC: 2

22 Oct 2009

5340-12-010-8490

5340-12-362-5328
Mounting Bracket

123625328
4632800386: RNCC: 3 | RNVC: 2

5 Mar 2004

5340-12-394-3251
Pipe Hanger

123943251
1816025140: RNCC: 3 | RNVC: 2
1571710: RNCC: 5 | RNVC: 2

21 Nov 2013

5340-12-187-6897
Nonmetallic Bumper

121876897
100032-11210: RNCC: 2 | RNVC: 2

29 Apr 1981

5340-12-192-6082
Retaining Strap

121926082
5835-21.002: RNCC: 3 | RNVC: 2
5835-21-002: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-195-7540
Nonmetallic Bumper

121957540
5801515-0100.004: RNCC: 3 | RNVC: 2
2243528024: RNCC: 5 | RNVC: 2
5801515-0100.004: RNCC: 5 | RNVC: 9
22435 28024: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-12-020-7258

5340-12-387-5813
Access Cover

123875813
BD9102G298: RNCC: 3 | RNVC: 2

11 Jan 2012

5340-12-185-4403
Metal Runner

121854403
CF307381A: RNCC: 3 | RNVC: 2
CF 307 381 A: RNCC: 5 | RNVC: 2
CF307381A: RNCC: 5 | RNVC: 2
CF307381A: RNCC: 5 | RNVC: 2
CF 307 381 A: RNCC: 5 | RNVC: 2

7 Oct 1980

5340-12-369-3624
Mounting Bracket

123693624
V6560-04001-044: RNCC: 2 | RNVC: 2
V6560-04001-044: RNCC: 3 | RNVC: 2

26 Jun 2006

5340-12-199-1671
Catch Strike

121991671
71100-3100-00-05: RNCC: 3 | RNVC: 2
71100-3100-00-05: RNCC: 5 | RNVC: 2
71100-3100-00-05: RNCC: 5 | RNVC: 9

3 Apr 1984

5340-12-371-3066
Mounting Bracket

123713066
8390-0011: RNCC: 2 | RNVC: 2
8390-0011: RNCC: 3 | RNVC: 2

13 Mar 2007

5340-12-183-1814
Rod End Clevis

121831814
2000-6011-00: RNCC: 3 | RNVC: 2

25 Mar 1980

5340-12-365-5811
Double Angle Bracket

123655811
J27420218-403: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-701-8435
Loop Clamp

127018435
VG95211-ML-127018435: RNCC: 2 | RNVC: 2
5149A-22: RNCC: 3 | RNVC: 2
0500812910290: RNCC: 5 | RNVC: 2
1666S50-22N: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-358-3844
Shimmy Damper

123583844
22001-11: RNCC: 3 | RNVC: 2
62449076: RNCC: 5 | RNVC: 2

15 Oct 2002

5340-12-702-1983
Blank Panel

127021983
VG95211-ML-127021983: RNCC: 2 | RNVC: 2
30.7210.371.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-340-0596
Door Hook

123400596
ZN4260-701: RNCC: 3 | RNVC: 2
8499880001: RNCC: 5 | RNVC: 2

22 Feb 1996

5340-12-350-9550
Corner Brace

123509550
5803636-201700.02: RNCC: 3 | RNVC: 2

9 Jun 2000

5340-12-184-5206
Electrical-Mechanical Equipment Post

121845206
5801339-063-003: RNCC: 3 | RNVC: 2
5801339-063.003: RNCC: 5 | RNVC: 2

29 Jul 1980

5340-12-345-5967
Angle Bracket

123455967
A70-0003: RNCC: 3 | RNVC: 2
1501998-0102-M: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-326-7791
Mounting Plate

123267791
E-4997-01-82: RNCC: 3 | RNVC: 2

24 Oct 1991

5340-12-145-1342
Webbing Strap

121451342
C7101-15-12-10: RNCC: 3 | RNVC: 2
161202301: RNCC: 5 | RNVC: 2
7101-15-12-10: RNCC: 5 | RNVC: 9
7101-15-12.10: RNCC: 5 | RNVC: 9
7101-15-12-10: RNCC: 5 | RNVC: 9
7101-15-12.10: RNCC: 5 | RNVC: 9
C7101-15-12-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-2818
Angle Bracket

121962818
34711-001: RNCC: 3 | RNVC: 2
34711-001: RNCC: 5 | RNVC: 2
34 711-001: RNCC: 5 | RNVC: 9

22 Jun 1983

5340-12-365-2278
Door Hook

123652278
2500278-191750.000.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-701-6537
Loop Clamp

127016537
VG95211-ML-127016537: RNCC: 2 | RNVC: 2
5.12.7207.1311.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-393-6132
Access Cover

123936132
2782-011000.011.0: RNCC: 2 | RNVC: 2
2782-011000.011.0: RNCC: 3 | RNVC: 2

26 Sep 2013

5340-12-300-6398
Mending Plate

123006398
5801997-150000.01: RNCC: 2 | RNVC: 2
5801997-150000.01: RNCC: 3 | RNVC: 2

18 Aug 1984

5340-12-701-2488
Mounting Bracket

127012488
VG95211-ML-127012488: RNCC: 2 | RNVC: 2
5.12.3600.8200.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5477
Mounting Bracket

127025477
VG95211-ML-127025477: RNCC: 2 | RNVC: 2
5.51.7211.1070.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-348-0460
Mounting Bracket

123480460
P-295525-003: RNCC: 3 | RNVC: 2
P295525-003: RNCC: 5 | RNVC: 2

31 Mar 1999

5340-12-185-2237
Halter

121852237
100278-35080.01.0: RNCC: 2 | RNVC: 2
100278-35080.01.0: RNCC: 3 | RNVC: 2
100278-35080-01-0: RNCC: 5 | RNVC: 2
100278-35080-01-0: RNCC: 5 | RNVC: 9

23 Sep 1980

5340-12-323-8594
Resilient Mount

123238594
2200791: RNCC: 3 | RNVC: 2
370000-13: RNCC: 5 | RNVC: 2

27 Dec 1990

5340-12-312-5693
Swivel Caster

123125693
31/160/4: RNCC: 3 | RNVC: 2

19 Jan 1988

5340-12-344-3765
Mounting Bracket

123443765
A-566920-041: RNCC: 3 | RNVC: 2
A566920-041: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-199-1718
Nonmetallic Bumper

121991718
86-1559-201000.008.0: RNCC: 3 | RNVC: 2
86-1559-201000.008.0: RNCC: 5 | RNVC: 9

3 Apr 1984

5340-12-302-7623
Mending Plate

123027623
6600117-200000.02: RNCC: 2 | RNVC: 2
6600117-200000.02: RNCC: 5 | RNVC: 9

29 Jan 1985

5340-12-309-8038
Pipe Bracket

123098038
71-14384-00: RNCC: 3 | RNVC: 2

4 Mar 1987

5340-12-322-9628
Access Cover

123229628
230668: RNCC: 3 | RNVC: 9
1865-040000.01.0: RNCC: 3 | RNVC: 9

11 Oct 1990

5340-12-701-5979
Mounting Plate

127015979
VG95211-ML-127015979: RNCC: 2 | RNVC: 2
5.12.6501.1952.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-301-3799
Mending Plate

123013799
23223-187101.05.0: RNCC: 2 | RNVC: 2
23223-187101.05.0: RNCC: 3 | RNVC: 2
1220522: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-12-357-6530
Mounting Bracket

123576530
9997001-992410.000.0: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-12-304-4359
Angle Bracket

123044359
537161-3009.000: RNCC: 3 | RNVC: 2
537161-3009.000: RNCC: 5 | RNVC: 9

17 Jul 1985

5340-12-164-6311
Handwheel

121646311
DIN950-A3-100X12-GG: RNCC: 2 | RNVC: 2
A3-100X12DIN950GG: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-197-1324
Lock-Release Lever

121971324
5801434-402500.00: RNCC: 3 | RNVC: 2
5801434-402500-00: RNCC: 5 | RNVC: 2

22 Sep 1983

5340-12-179-6764
Mending Plate

121796764
CF 446 321: RNCC: 2 | RNVC: 2
CF 446 321: RNCC: 3 | RNVC: 2
536056-0759.000: RNCC: 3 | RNVC: 2
CF 446 321: RNCC: 5 | RNVC: 2
CF446321: RNCC: 5 | RNVC: 2
CF 446 321: RNCC: 5 | RNVC: 2
CF446321: RNCC: 5 | RNVC: 2
CF446321: RNCC: 5 | RNVC: 2
536056-0759.000: RNCC: 5 | RNVC: 9

18 Jul 1979

5340-12-153-6312
Nut And Bolt Locking Plate

121536312
100355-400330.03: RNCC: 2 | RNVC: 2
100355-400330.03: RNCC: 3 | RNVC: 2
100355-400330-03: RNCC: 5 | RNVC: 2
100355-400330-03: RNCC: 5 | RNVC: 9
100355-400330-03: RNCC: 5 | RNVC: 9
100355-400330.03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-370-5938
Helical Compression Spring Retainer

123705938
V6520-03011-146: RNCC: 2 | RNVC: 2
V6520-03011-146: RNCC: 3 | RNVC: 2

27 Nov 2006

5340-12-386-5312
Angle Bracket

123865312
2500333-4000-04: RNCC: 2 | RNVC: 2
9600.80.30.00: RNCC: 3 | RNVC: 2

8 Sep 2011

5340-12-318-5122
Webbing Strap

123185122
5802086-21030: RNCC: 2 | RNVC: 2
5802086-21030: RNCC: 3 | RNVC: 2
000-F1-25X2,0X600-PE-RAL6031: RNCC: 6 | RNVC: 9

21 Jul 1989

5340-12-190-9359
Resilient Mount

121909359
1202 7904: RNCC: 3 | RNVC: 2
3.602.9.085.027.6: RNCC: 5 | RNVC: 2
12027904: RNCC: 5 | RNVC: 2
3-602-9-085-027-6: RNCC: 5 | RNVC: 9
3.602.9.085.027.6: RNCC: 5 | RNVC: 9

23 Dec 1981

5340-12-702-5132
Rod End Connector

127025132
VG95211-ML-127025132: RNCC: 2 | RNVC: 2
5.51.6501.1370.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-161-1714
Rod End Connector

121611714
160-741009-01: RNCC: 3 | RNVC: 2
160-741009-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-161-4370
Resilient Mount

121614370
731001.NR55.ST: RNCC: 3 | RNVC: 2
27859BSTN5590: RNCC: 3 | RNVC: 2
27859FJ65: RNCC: 5 | RNVC: 2
27859SM550: RNCC: 5 | RNVC: 2
1019203000: RNCC: 5 | RNVC: 2
27859,NR55ST: RNCC: 5 | RNVC: 2
27859-NR55ST: RNCC: 5 | RNVC: 2
27859.NR55.ST: RNCC: 5 | RNVC: 2
27859FJ65: RNCC: 5 | RNVC: 9
VG95365-A2-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-341-4003
Mounting Bracket

123414003
457-151431.000: RNCC: 3 | RNVC: 9
457-151431-000: RNCC: 5 | RNVC: 9
9873639: RNCC: 5 | RNVC: 9

31 Aug 1996

5340-12-346-1641
Mounting Bracket

123461641
571219777: RNCC: 3 | RNVC: 2
0224 7525: RNCC: 3 | RNVC: 2
0224 7525EC0199-48: RNCC: 5 | RNVC: 2

22 Jun 1998

5340-12-406-4332
Mechanical Stop

5340-12-124-1204
Rod End Clevis

121241204
DIN71752-G14X28-35S20K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G14X28-35S20K-A3P: RNCC: 3 | RNVC: 2
DIN71752-G14X28-35S20K-A3P: RNCC: 3 | RNVC: 2
100200140028/024-35S20K: RNCC: 5 | RNVC: 2
DIN71752-G14X28-35S20K: RNCC: 5 | RNVC: 9
G14X28DIN71752-35S20K: RNCC: 5 | RNVC: 9
G14X28DIN71752-35S20K: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-366-1085
Mounting Bracket

123661085
2500278-190013.000.0: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-177-8176
Loop Clamp

121778176
DIN3016-1-D2-7-7-7-7X12-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.4X7/12: RNCC: 3 | RNVC: 2
DIN3016-D2-7-7-7-7X12-W1-2: RNCC: 3 | RNVC: 2
RSGU1100-4X7-12: RNCC: 5 | RNVC: 2
4219412007: RNCC: 5 | RNVC: 2
RSGU1100.4X7/12: RNCC: 5 | RNVC: 2
DIN3016-D2-7-7-7-7X12-W1-2: RNCC: 5 | RNVC: 9

28 Feb 1979

5340-12-196-7367
Electrical-Mechanical Equipment Post

121967367
4-001-36/24840.01: RNCC: 3 | RNVC: 2
4-001-36/24840.01: RNCC: 5 | RNVC: 9
895183: RNCC: 8 | RNVC: 2

9 Aug 1983

5340-12-326-4549
Angle Bracket

123264549
3963120687: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-12-361-0044
Access Cover

123610044
901 811 00 07: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-179-7751
Webbing Strap

121797751
3818600352: RNCC: 3 | RNVC: 2

30 Jul 1979

5340-12-194-1040
Dust And Moisture Seal Protective Plug

121941040
084301115: RNCC: 3 | RNVC: 2

4 Oct 1982

5340-12-391-8289
Mounting Bracket

123918289
I006518TAN686A: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-12-349-1842
Exit Bolt

123491842
2500271-60110.02: RNCC: 2 | RNVC: 2
7102985: RNCC: 3 | RNVC: 2
2500271-60110.02: RNCC: 5 | RNVC: 2

6 Oct 1999

5340-12-308-9405
Kunst Gleitschiene

123089405
351271312141: RNCC: 3 | RNVC: 2

28 Nov 1986

5340-12-300-9731
Nonmetallic Bumper

123009731
1000151-103000.01: RNCC: 2 | RNVC: 2
200.0585: RNCC: 3 | RNVC: 2
837-1000151-103000.01: RNCC: 3 | RNVC: 2
1000151-103000.01: RNCC: 5 | RNVC: 2

14 Sep 1984

5340-12-070-1233

5340-12-183-5814
Handle Grip

121835814
CF407196A: RNCC: 3 | RNVC: 2
CF 407 196 A: RNCC: 5 | RNVC: 2
CF407196A: RNCC: 5 | RNVC: 2
CF407196A: RNCC: 5 | RNVC: 2
CF 407 196 A: RNCC: 5 | RNVC: 2

3 May 1980

5340-12-010-0861

5340-12-387-5938
Access Cover

123875938
4691680: RNCC: 3 | RNVC: 2

12 Jan 2012

5340-12-303-5567
Metal Runner

123035567
2300088-411131.00: RNCC: 2 | RNVC: 2
9846694: RNCC: 3 | RNVC: 2
2300088-411131.00: RNCC: 5 | RNVC: 9
9846694: RNCC: 5 | RNVC: 9

4 Apr 1985

5340-12-367-9665
Mounting Plate

123679665
5592371735: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-12-320-0470
Spring Tension Clip

123200470
000361: RNCC: 3 | RNVC: 2

1 Dec 1989

5340-12-319-5038
Access Cover

123195038
4900059-721350.004.0: RNCC: 3 | RNVC: 2
1510164: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-308-5625
Lock-Release Lever

123085625
3.20608.00: RNCC: 3 | RNVC: 9
122129351: RNCC: 5 | RNVC: 2
F300 0T 001 8567: RNCC: 6 | RNVC: 9

23 Oct 1986

5340-12-357-0093
Mounting Bracket

123570093
8812030044: RNCC: 2 | RNVC: 2
8812030044: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-326-9326
Access Cover

123269326
2-062-2-81200: RNCC: 3 | RNVC: 2
2-062-2-81200: RNCC: 5 | RNVC: 9

12 Nov 1991

5340-12-190-9719
Bow Handle

121909719
270.1: RNCC: 3 | RNVC: 2
270-1: RNCC: 5 | RNVC: 2

29 Dec 1981

5340-12-354-2651
Mending Plate

123542651
4D0.5800-403248: RNCC: 3 | RNVC: 2

25 Jun 2001

5340-12-359-6070
Runner

123596070
6000004-312600: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-349-7851
Angle Bracket

123497851
FAST-201700.03: RNCC: 2 | RNVC: 2
FAST-201700.03: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-179-7388
Access Cover

121797388
5800828-1475: RNCC: 3 | RNVC: 2

25 Jul 1979

5340-12-134-0563
Stift

121340563
33526188: RNCC: 3 | RNVC: 2
03349985: RNCC: 5 | RNVC: 2
3349985: RNCC: 5 | RNVC: 2
3349985EF5074-26: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-178-8479
Strap Fastener Loop

121788479
23111-4617.01: RNCC: 2 | RNVC: 2
23111-4617.01: RNCC: 3 | RNVC: 2
23111-4617-01: RNCC: 5 | RNVC: 9
23111-4617-01: RNCC: 5 | RNVC: 9
23111-4617.01: RNCC: 5 | RNVC: 9

18 May 1979

5340-12-329-8695
Butt Hinge Leaf

123298695
VG95211-ML-123298695: RNCC: 2 | RNVC: 2
65207-09003Y105: RNCC: 3 | RNVC: 2
65207-09003Y105: RNCC: 5 | RNVC: 2

8 Oct 1992

5340-12-183-1811
Nonmetallic Bumper

121831811
59006501: RNCC: 3 | RNVC: 2
EE96-96KERNBQUALRTE2: RNCC: 3 | RNVC: 2
E96-96KERNBQUALRTE2: RNCC: 5 | RNVC: 2

25 Mar 1980

5340-12-385-2230
Caster Frame

123852230
F1.1692-50-10-40.00-00: RNCC: 3 | RNVC: 2

11 May 2011

5340-12-310-4704
Loop Clamp

123104704
H3220-F2X6: RNCC: 3 | RNVC: 2
H3220-F2X6: RNCC: 3 | RNVC: 2
H3220-F2X6: RNCC: 5 | RNVC: 2
K0001175620: RNCC: 5 | RNVC: 2
0117 5620: RNCC: 5 | RNVC: 2

25 May 1987

5340-12-369-4453
Nut And Bolt Retainer

123694453
A70-0005-004: RNCC: 3 | RNVC: 2

5 Jul 2006

5340-12-327-0820
Mounting Bracket

123270820
561788-00: RNCC: 3 | RNVC: 2

28 Nov 1991

5340-12-348-0861
Rod End Connector

123480861
105-072-332-15: RNCC: 3 | RNVC: 2

13 Apr 1999

5340-12-342-5840
Butt Hinge Leaf

123425840
65302-12011Y119: RNCC: 3 | RNVC: 2

4 Mar 1997

5340-12-002-0537

5340-12-347-9947
Lock Key

123479947
251837219A: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-12-363-0897
Access Cover

123630897
160-771537: RNCC: 3 | RNVC: 2

4 May 2004

5340-12-027-1763

5340-12-357-9003
Access Cover

123579003
12224702: RNCC: 3 | RNVC: 2
12224701: RNCC: 5 | RNVC: 2

12 Aug 2002

5340-12-362-7229
Nonmetallic Bumper

123627229
S880M00X1004: RNCC: 3 | RNVC: 2

24 Mar 2004

5340-12-323-1136
Catch Strike

123231136
434069: RNCC: 2 | RNVC: 2
434069: RNCC: 3 | RNVC: 2
434069: RNCC: 5 | RNVC: 2
434069: RNCC: 5 | RNVC: 9

24 Oct 1990

5340-12-353-5410
Track Stop

123535410
000000-1013.229: RNCC: 3 | RNVC: 2
000000-1013.229: RNCC: 5 | RNVC: 2
000000-1013.229: RNCC: 5 | RNVC: 9

5 Apr 2001

5340-12-309-3951
Resilient Mount

123093951
17111460219: RNCC: 3 | RNVC: 9

21 Jan 1987

5340-12-331-5749
Mounting Bracket

123315749
1043 301 658: RNCC: 3 | RNVC: 2
1043301658: RNCC: 5 | RNVC: 2

24 May 1993

5340-12-336-6316
Helical Compression Spring Seat

123366316
D11298: RNCC: 3 | RNVC: 2
D11298: RNCC: 5 | RNVC: 9

2 Dec 1994

5340-12-183-0221
Control Rod

121830221
2300033-306110: RNCC: 2 | RNVC: 2
2300033-306110: RNCC: 5 | RNVC: 9

13 Mar 1980

5340-12-394-4957
Loop Clamp

123944957
112292: RNCC: 3 | RNVC: 2

6 Dec 2013

5340-12-027-8067

5340-12-331-8850
Pipe Hanger

123318850
P-616832-003: RNCC: 3 | RNVC: 2
P616832-003: RNCC: 5 | RNVC: 2

1 Jul 1993

5340-12-168-9339
Helical Compression Spring Seat

121689339
CF409423B: RNCC: 3 | RNVC: 2
CF409423B: RNCC: 5 | RNVC: 2
CF 409 423 B: RNCC: 5 | RNVC: 2
CF 409 423 B: RNCC: 5 | RNVC: 2
CF409423B: RNCC: 5 | RNVC: 2
CF 409 423 B: RNCC: 5 | RNVC: 2

13 Apr 1977

5340-12-189-7283
Nut And Bolt Locking Plate

121897283
52-55926-4: RNCC: 3 | RNVC: 2

19 Oct 1981

5340-12-358-9306
Mounting Plate

123589306
2500262-394300.002.0: RNCC: 2 | RNVC: 2
2500262-394300.002.0: RNCC: 3 | RNVC: 2

29 Nov 2002

5340-12-010-2976

Load More Results